diff options
21 files changed, 42 insertions, 42 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h index bbed8fc010ce..07e999a32a7f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-config.h +++ b/drivers/net/wireless/iwlwifi/iwl-config.h @@ -228,7 +228,7 @@ struct iwl_pwr_tx_backoff { /** * struct iwl_cfg - * @name: Offical name of the device + * @name: Official name of the device * @fw_name_pre: Firmware filename prefix. The api version and extension * (.ucode) will be added to filename before loading from disk. The * filename is constructed as fw_name_pre<api>.ucode. diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c index b8e5690e5716..7783ac8761c4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/iwlwifi/iwl-drv.c @@ -145,7 +145,7 @@ static struct iwlwifi_opmode_table { #define IWL_DEFAULT_SCAN_CHANNELS 40 /* - * struct fw_sec: Just for the image parsing proccess. + * struct fw_sec: Just for the image parsing process. * For the fw storage we are using struct fw_desc. */ struct fw_sec { diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.h b/drivers/net/wireless/iwlwifi/iwl-drv.h index 67a3a241b331..cda746b33db1 100644 --- a/drivers/net/wireless/iwlwifi/iwl-drv.h +++ b/drivers/net/wireless/iwlwifi/iwl-drv.h @@ -123,7 +123,7 @@ struct iwl_cfg; * starts the driver: fetches the firmware. This should be called by bus * specific system flows implementations. For example, the bus specific probe * function should do bus related operations only, and then call to this - * function. It returns the driver object or %NULL if an error occured. + * function. It returns the driver object or %NULL if an error occurred. */ struct iwl_drv *iwl_drv_start(struct iwl_trans *trans, const struct iwl_cfg *cfg); diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom-read.c b/drivers/net/wireless/iwlwifi/iwl-eeprom-read.c index 25d0105741db..219ca8acca62 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom-read.c +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom-read.c @@ -248,7 +248,7 @@ static int iwl_read_otp_word(struct iwl_trans *trans, u16 addr, otpgp = iwl_read32(trans, CSR_OTP_GP_REG); if (otpgp & CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK) { /* stop in this case */ - /* set the uncorrectable OTP ECC bit for acknowledgement */ + /* set the uncorrectable OTP ECC bit for acknowledgment */ iwl_set_bit(trans, CSR_OTP_GP_REG, CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK); IWL_ERR(trans, "Uncorrectable OTP ECC error, abort OTP read\n"); @@ -256,7 +256,7 @@ static int iwl_read_otp_word(struct iwl_trans *trans, u16 addr, } if (otpgp & CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK) { /* continue in this case */ - /* set the correctable OTP ECC bit for acknowledgement */ + /* set the correctable OTP ECC bit for acknowledgment */ iwl_set_bit(trans, CSR_OTP_GP_REG, CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK); IWL_ERR(trans, "Correctable OTP ECC error, continue read\n"); diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h index 1f7f15eb86da..d45dc021cda2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fh.h +++ b/drivers/net/wireless/iwlwifi/iwl-fh.h @@ -445,7 +445,7 @@ static inline unsigned int FH_MEM_CBBC_QUEUE(unsigned int chnl) #define RX_LOW_WATERMARK 8 /** - * struct iwl_rb_status - reseve buffer status + * struct iwl_rb_status - reserve buffer status * host memory mapped FH registers * @closed_rb_num [0:11] - Indicates the index of the RB which was closed * @closed_fr_num [0:11] - Indicates the index of the RX Frame which was closed diff --git a/drivers/net/wireless/iwlwifi/iwl-fw-error-dump.h b/drivers/net/wireless/iwlwifi/iwl-fw-error-dump.h index 8b926ece0d3a..37652857b8d0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fw-error-dump.h +++ b/drivers/net/wireless/iwlwifi/iwl-fw-error-dump.h @@ -183,7 +183,7 @@ struct iwl_fw_error_dump_info { * struct iwl_fw_error_dump_fw_mon - FW monitor data * @fw_mon_wr_ptr: the position of the write pointer in the cyclic buffer * @fw_mon_base_ptr: base pointer of the data - * @fw_mon_cycle_cnt: number of wrap arounds + * @fw_mon_cycle_cnt: number of wraparounds * @reserved: for future use * @data: captured data */ diff --git a/drivers/net/wireless/iwlwifi/iwl-fw-file.h b/drivers/net/wireless/iwlwifi/iwl-fw-file.h index 823938e3b7ef..cc789cb3c052 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fw-file.h +++ b/drivers/net/wireless/iwlwifi/iwl-fw-file.h @@ -191,7 +191,7 @@ struct iwl_ucode_capa { * enum iwl_ucode_tlv_flag - ucode API flags * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously * was a separate TLV but moved here to save space. - * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behaviour on hidden SSID, + * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behavior on hidden SSID, * treats good CRC threshold as a boolean * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w). * @IWL_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P. diff --git a/drivers/net/wireless/iwlwifi/iwl-op-mode.h b/drivers/net/wireless/iwlwifi/iwl-op-mode.h index 17de6d46222a..ce1cdd7604e8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-op-mode.h +++ b/drivers/net/wireless/iwlwifi/iwl-op-mode.h @@ -94,7 +94,7 @@ struct iwl_cfg; * The operational mode has a very simple life cycle. * * 1) The driver layer (iwl-drv.c) chooses the op_mode based on the - * capabilities advertized by the fw file (in TLV format). + * capabilities advertised by the fw file (in TLV format). * 2) The driver layer starts the op_mode (ops->start) * 3) The op_mode registers mac80211 * 4) The op_mode is governed by mac80211 @@ -116,7 +116,7 @@ struct iwl_cfg; * May sleep * @rx: Rx notification to the op_mode. rxb is the Rx buffer itself. Cmd is the * HCMD this Rx responds to. Can't sleep. - * @napi_add: NAPI initialisation. The transport is fully responsible for NAPI, + * @napi_add: NAPI initialization. The transport is fully responsible for NAPI, * but the higher layers need to know about it (in particular mac80211 to * to able to call the right NAPI RX functions); this function is needed * to eventually call netif_napi_add() with higher layer involvement. diff --git a/drivers/net/wireless/iwlwifi/iwl-phy-db.c b/drivers/net/wireless/iwlwifi/iwl-phy-db.c index e893c6eb260c..a105455b6a24 100644 --- a/drivers/net/wireless/iwlwifi/iwl-phy-db.c +++ b/drivers/net/wireless/iwlwifi/iwl-phy-db.c @@ -125,7 +125,7 @@ struct iwl_phy_db_chg_txp { } __packed; /* - * phy db - Receieve phy db chunk after calibrations + * phy db - Receive phy db chunk after calibrations */ struct iwl_calib_res_notif_phy_db { __le16 type; diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 11ac5c58527f..6dfed1259260 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -77,10 +77,10 @@ /** * DOC: Transport layer - what is it ? * - * The tranport layer is the layer that deals with the HW directly. It provides + * The transport layer is the layer that deals with the HW directly. It provides * an abstraction of the underlying HW to the upper layer. The transport layer * doesn't provide any policy, algorithm or anything of this kind, but only - * mechanisms to make the HW do something.It is not completely stateless but + * mechanisms to make the HW do something. It is not completely stateless but * close to it. * We will have an implementation for each different supported bus. */ @@ -111,10 +111,10 @@ /** * DOC: Host command section * - * A host command is a commaned issued by the upper layer to the fw. There are + * A host command is a command issued by the upper layer to the fw. There are * several versions of fw that have several APIs. The transport layer is * completely agnostic to these differences. - * The transport does provide helper functionnality (i.e. SYNC / ASYNC mode), + * The transport does provide helper functionality (i.e. SYNC / ASYNC mode), */ #define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f) #define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8) @@ -195,7 +195,7 @@ static inline u32 iwl_rx_packet_payload_len(const struct iwl_rx_packet *pkt) * @CMD_WANT_SKB: Not valid with CMD_ASYNC. The caller needs the buffer of * the response. The caller needs to call iwl_free_resp when done. * @CMD_HIGH_PRIO: The command is high priority - it goes to the front of the - * command queue, but after other high priority commands. valid only + * command queue, but after other high priority commands. Valid only * with CMD_ASYNC. * @CMD_SEND_IN_IDLE: The command should be sent even when the trans is idle. * @CMD_MAKE_TRANS_IDLE: The command response should mark the trans as idle. @@ -582,7 +582,7 @@ enum iwl_d0i3_mode { * @cfg - pointer to the configuration * @status: a bit-mask of transport status flags * @dev - pointer to struct device * that represents the device - * @hw_id: a u32 with the ID of the device / subdevice. + * @hw_id: a u32 with the ID of the device / sub-device. * Set during transport allocation. * @hw_id_str: a string with info about HW ID. Set during transport allocation. * @pm_support: set to true in start_hw if link pm is supported diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-d3.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-d3.h index 6d3bea5c59d1..d7658d16e965 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-d3.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-d3.h @@ -132,7 +132,7 @@ struct iwl_proto_offload_cmd_common { * @solicited_node_ipv6_addr: broken -- solicited node address exists * for each target address * @target_ipv6_addr: our target addresses - * @ndp_mac_addr: neighbor soliciation response MAC address + * @ndp_mac_addr: neighbor solicitation response MAC address */ struct iwl_proto_offload_cmd_v1 { struct iwl_proto_offload_cmd_common common; @@ -150,7 +150,7 @@ struct iwl_proto_offload_cmd_v1 { * @solicited_node_ipv6_addr: broken -- solicited node address exists * for each target address * @target_ipv6_addr: our target addresses - * @ndp_mac_addr: neighbor soliciation response MAC address + * @ndp_mac_addr: neighbor solicitation response MAC address */ struct iwl_proto_offload_cmd_v2 { struct iwl_proto_offload_cmd_common common; diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-mac.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-mac.h index aabaedd3b3ee..f3f3ee0a766b 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-mac.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-mac.h @@ -255,7 +255,7 @@ struct iwl_mac_data_p2p_dev { /** * enum iwl_mac_filter_flags - MAC context filter flags * @MAC_FILTER_IN_PROMISC: accept all data frames - * @MAC_FILTER_IN_CONTROL_AND_MGMT: pass all mangement and + * @MAC_FILTER_IN_CONTROL_AND_MGMT: pass all management and * control frames to the host * @MAC_FILTER_ACCEPT_GRP: accept multicast frames * @MAC_FILTER_DIS_DECRYPT: don't decrypt unicast frames diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h index a5fbbd637070..4f81dcf57a73 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h @@ -103,7 +103,7 @@ struct iwl_ssid_ie { * @SCAN_COMP_STATUS_ERR_COEX: medium was lost ot WiMax * @SCAN_COMP_STATUS_P2P_ACTION_OK: P2P public action frame TX was successful * (not an error!) - * @SCAN_COMP_STATUS_ITERATION_END: indicates end of one repeatition the driver + * @SCAN_COMP_STATUS_ITERATION_END: indicates end of one repetition the driver * asked for * @SCAN_COMP_STATUS_ERR_ALLOC_TE: scan could not allocate time events */ @@ -187,11 +187,11 @@ enum scan_framework_client { * struct iwl_scan_offload_cmd - SCAN_REQUEST_FIXED_PART_API_S_VER_6 * @scan_flags: see enum iwl_scan_flags * @channel_count: channels in channel list - * @quiet_time: dwell time, in milisiconds, on quiet channel + * @quiet_time: dwell time, in milliseconds, on quiet channel * @quiet_plcp_th: quiet channel num of packets threshold * @good_CRC_th: passive to active promotion threshold * @rx_chain: RXON rx chain. - * @max_out_time: max TUs to be out of assoceated channel + * @max_out_time: max TUs to be out of associated channel * @suspend_time: pause scan this TUs when returning to service channel * @flags: RXON flags * @filter_flags: RXONfilter @@ -232,7 +232,7 @@ enum iwl_scan_offload_channel_flags { * see enum iwl_scan_offload_channel_flags. * __le16 channel_number: channel number 1-13 etc. * __le16 iter_count: repetition count for the channel. - * __le32 iter_interval: interval between two innteration on one channel. + * __le32 iter_interval: interval between two iterations on one channel. * u8 active_dwell. * u8 passive_dwell. */ @@ -275,8 +275,8 @@ enum iwl_scan_offload_band_selection { /** * iwl_scan_offload_profile - SCAN_OFFLOAD_PROFILE_S * @ssid_index: index to ssid list in fixed part - * @unicast_cipher: encryption olgorithm to match - bitmap - * @aut_alg: authentication olgorithm to match - bitmap + * @unicast_cipher: encryption algorithm to match - bitmap + * @aut_alg: authentication algorithm to match - bitmap * @network_type: enum iwl_scan_offload_network_type * @band_selection: enum iwl_scan_offload_band_selection * @client_bitmap: clients waiting for match - enum scan_framework_client @@ -748,7 +748,7 @@ enum iwl_umac_scan_general_flags { * @flags: bitmap - 0-19: directed scan to i'th ssid. * @channel_num: channel number 1-13 etc. * @iter_count: repetition count for the channel. - * @iter_interval: interval between two scan interations on one channel. + * @iter_interval: interval between two scan iterations on one channel. */ struct iwl_scan_channel_cfg_umac { __le32 flags; diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h index 2b7e6cb1dbd9..629b8c7da478 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h @@ -349,7 +349,7 @@ struct iwl_mvm_vif_bf_data { * @bcast_sta: station used for broadcast packets. Used by the following * vifs: P2P_DEVICE, GO and AP. * @beacon_skb: the skb used to hold the AP/GO beacon template - * @smps_requests: the SMPS requests of differents parts of the driver, + * @smps_requests: the SMPS requests of different parts of the driver, * combined on update to yield the overall request to mac80211. * @beacon_stats: beacon statistics, containing the # of received beacons, * # of received beacons accumulated over FW restart, and the current diff --git a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c index 192b74bc8cf6..e68a475e3071 100644 --- a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c +++ b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c @@ -67,7 +67,7 @@ #include "fw-api.h" #include "mvm.h" -/* Maps the driver specific channel width definition to the the fw values */ +/* Maps the driver specific channel width definition to the fw values */ u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef) { switch (chandef->width) { diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c index e00b454c6c17..c1c8c56727d2 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/iwlwifi/mvm/rs.c @@ -3221,7 +3221,7 @@ static void rs_fill_lq_cmd(struct iwl_mvm *mvm, lq_cmd->agg_frame_cnt_limit = mvmsta->max_agg_bufsize; /* - * In case of low latency, tell the firwmare to leave a frame in the + * In case of low latency, tell the firmware to leave a frame in the * Tx Fifo so that it can start a transaction in the same TxOP. This * basically allows the firmware to send bursts. */ @@ -3722,7 +3722,7 @@ void iwl_mvm_rate_control_unregister(void) /** * iwl_mvm_tx_protection - Gets LQ command, change it to enable/disable - * Tx protection, according to this rquest and previous requests, + * Tx protection, according to this request and previous requests, * and send the LQ command. * @mvmsta: The station * @enable: Enable Tx protection? diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c index 231e7dd6c8f0..1845b79487c8 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -1714,8 +1714,8 @@ void iwl_mvm_sta_modify_disable_tx_ap(struct iwl_mvm *mvm, mvm_sta->disable_tx = disable; /* - * Tell mac80211 to start/stop queueing tx for this station, - * but don't stop queueing if there are still pending frames + * Tell mac80211 to start/stop queuing tx for this station, + * but don't stop queuing if there are still pending frames * for this station. */ if (disable || !atomic_read(&mvm->pending_frames[mvm_sta->sta_id])) diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.h b/drivers/net/wireless/iwlwifi/mvm/sta.h index d8f48975ad08..748f5dc3f9f4 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.h +++ b/drivers/net/wireless/iwlwifi/mvm/sta.h @@ -150,7 +150,7 @@ struct iwl_mvm_vif; * DOC: station table - AP Station in STA mode * * %iwl_mvm_vif includes the index of the AP station in the fw's STA table: - * %ap_sta_id. To get the point to the coresponsding %ieee80211_sta, + * %ap_sta_id. To get the point to the corresponding %ieee80211_sta, * &fw_id_to_mac_id can be used. Due to the way the fw works, we must not remove * the AP station from the fw before setting the MAC context as unassociated. * Hence, %fw_id_to_mac_id[%ap_sta_id] will be NULLed when the AP station is @@ -209,14 +209,14 @@ struct iwl_mvm_vif; * When a trigger frame is received, mac80211 tells the driver to send frames * from the AMPDU queues or sends frames to non-aggregation queues itself, * depending on which ACs are delivery-enabled and what TID has frames to - * transmit. Note that mac80211 has all the knowledege since all the non-agg + * transmit. Note that mac80211 has all the knowledge since all the non-agg * frames are buffered / filtered, and the driver tells mac80211 about agg * frames). The driver needs to tell the fw to let frames out even if the * station is asleep. This is done by %iwl_mvm_sta_modify_sleep_tx_count. * * When we receive a frame from that station with PM bit unset, the driver * needs to let the fw know that this station isn't asleep any more. This is - * done by %iwl_mvm_sta_modify_ps_wake in response to mac80211 signalling the + * done by %iwl_mvm_sta_modify_ps_wake in response to mac80211 signaling the * station's wakeup. * * For a GO, the Service Period might be cut short due to an absence period diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c index a32f612a8b59..bd519597eb2d 100644 --- a/drivers/net/wireless/iwlwifi/mvm/time-event.c +++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c @@ -119,7 +119,7 @@ void iwl_mvm_roc_done_wk(struct work_struct *wk) /* * Flush the offchannel queue -- this is called when the time - * event finishes or is cancelled, so that frames queued for it + * event finishes or is canceled, so that frames queued for it * won't get stuck on the queue and be transmitted in the next * time event. * We have to send the command asynchronously since this cannot @@ -778,7 +778,7 @@ void iwl_mvm_stop_roc(struct iwl_mvm *mvm) * Iterate over the list of aux roc time events and find the time * event that is associated with a BSS interface. * This assumes that a BSS interface can have only a single time - * event at any given time and this time event coresponds to a ROC + * event at any given time and this time event corresponds to a ROC * request */ list_for_each_entry(te_data, &mvm->aux_roc_te_list, list) { diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.h b/drivers/net/wireless/iwlwifi/mvm/time-event.h index 6f6b35db3ab8..de4fbc6d57f1 100644 --- a/drivers/net/wireless/iwlwifi/mvm/time-event.h +++ b/drivers/net/wireless/iwlwifi/mvm/time-event.h @@ -147,7 +147,7 @@ void iwl_mvm_protect_session(struct iwl_mvm *mvm, * @vif: the virtual interface for which the session is issued * * This functions cancels the session protection which is an act of good - * citizenship. If it is not needed any more it should be cancelled because + * citizenship. If it is not needed any more it should be canceled because * the other bindings wait for the medium during that time. * This funtions doesn't sleep. */ @@ -162,7 +162,7 @@ int iwl_mvm_rx_time_event_notif(struct iwl_mvm *mvm, struct iwl_device_cmd *cmd); /** - * iwl_mvm_start_p2p_roc - start remain on channel for p2p device functionlity + * iwl_mvm_start_p2p_roc - start remain on channel for p2p device functionality * @mvm: the mvm component * @vif: the virtual interface for which the roc is requested. It is assumed * that the vif type is NL80211_IFTYPE_P2P_DEVICE diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c index 593a810fe53e..54e3556842c4 100644 --- a/drivers/net/wireless/iwlwifi/mvm/utils.c +++ b/drivers/net/wireless/iwlwifi/mvm/utils.c @@ -122,7 +122,7 @@ int iwl_mvm_send_cmd_pdu(struct iwl_mvm *mvm, u8 id, } /* - * We assume that the caller set the status to the sucess value + * We assume that the caller set the status to the success value */ int iwl_mvm_send_cmd_status(struct iwl_mvm *mvm, struct iwl_host_cmd *cmd, u32 *status) @@ -737,7 +737,7 @@ int iwl_mvm_send_lq_cmd(struct iwl_mvm *mvm, struct iwl_lq_cmd *lq, bool init) } /** - * iwl_mvm_update_smps - Get a requst to change the SMPS mode + * iwl_mvm_update_smps - Get a request to change the SMPS mode * @req_type: The part of the driver who call for a change. * @smps_requests: The request to change the SMPS mode. * |