diff options
-rw-r--r-- | Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt | 26 | ||||
-rw-r--r-- | drivers/gpu/drm/imx/imx-tve.c | 2 | ||||
-rw-r--r-- | drivers/gpu/drm/imx/parallel-display.c | 21 | ||||
-rw-r--r-- | drivers/gpu/ipu-v3/ipu-common.c | 3 |
4 files changed, 43 insertions, 9 deletions
diff --git a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt index e75f0e549fff..971c3eedb1c7 100644 --- a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt +++ b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt @@ -65,8 +65,10 @@ Optional properties: - edid: verbatim EDID data block describing attached display. - ddc: phandle describing the i2c bus handling the display data channel -- port: A port node with endpoint definitions as defined in +- port@[0-1]: Port nodes with endpoint definitions as defined in Documentation/devicetree/bindings/media/video-interfaces.txt. + Port 0 is the input port connected to the IPU display interface, + port 1 is the output port connected to a panel. example: @@ -75,9 +77,29 @@ display@di0 { edid = [edid-data]; interface-pix-fmt = "rgb24"; - port { + port@0 { + reg = <0>; + display_in: endpoint { remote-endpoint = <&ipu_di0_disp0>; }; }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +panel { + ... + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; }; diff --git a/drivers/gpu/drm/imx/imx-tve.c b/drivers/gpu/drm/imx/imx-tve.c index 214eceefc981..e671ad369416 100644 --- a/drivers/gpu/drm/imx/imx-tve.c +++ b/drivers/gpu/drm/imx/imx-tve.c @@ -301,7 +301,7 @@ static void imx_tve_encoder_prepare(struct drm_encoder *encoder) switch (tve->mode) { case TVE_MODE_VGA: - imx_drm_set_bus_format_pins(encoder, MEDIA_BUS_FMT_YUV8_1X24, + imx_drm_set_bus_format_pins(encoder, MEDIA_BUS_FMT_GBR888_1X24, tve->hsync_pin, tve->vsync_pin); break; case TVE_MODE_TVOUT: diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c index 74a9ce40ddc4..b4deb9cf9d71 100644 --- a/drivers/gpu/drm/imx/parallel-display.c +++ b/drivers/gpu/drm/imx/parallel-display.c @@ -21,6 +21,7 @@ #include <drm/drm_panel.h> #include <linux/videodev2.h> #include <video/of_display_timing.h> +#include <linux/of_graph.h> #include "imx-drm.h" @@ -208,7 +209,7 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data) { struct drm_device *drm = data; struct device_node *np = dev->of_node; - struct device_node *panel_node; + struct device_node *port; const u8 *edidp; struct imx_parallel_display *imxpd; int ret; @@ -234,11 +235,19 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data) imxpd->bus_format = MEDIA_BUS_FMT_RGB666_1X24_CPADHI; } - panel_node = of_parse_phandle(np, "fsl,panel", 0); - if (panel_node) { - imxpd->panel = of_drm_find_panel(panel_node); - if (!imxpd->panel) - return -EPROBE_DEFER; + /* port@1 is the output port */ + port = of_graph_get_port_by_id(np, 1); + if (port) { + struct device_node *endpoint, *remote; + + endpoint = of_get_child_by_name(port, "endpoint"); + if (endpoint) { + remote = of_graph_get_remote_port_parent(endpoint); + if (remote) + imxpd->panel = of_drm_find_panel(remote); + if (!imxpd->panel) + return -EPROBE_DEFER; + } } imxpd->dev = dev; diff --git a/drivers/gpu/ipu-v3/ipu-common.c b/drivers/gpu/ipu-v3/ipu-common.c index 6d2f39d36e44..00f2058944e5 100644 --- a/drivers/gpu/ipu-v3/ipu-common.c +++ b/drivers/gpu/ipu-v3/ipu-common.c @@ -1107,6 +1107,9 @@ static int ipu_irq_init(struct ipu_soc *ipu) return ret; } + for (i = 0; i < IPU_NUM_IRQS; i += 32) + ipu_cm_write(ipu, 0, IPU_INT_CTRL(i / 32)); + for (i = 0; i < IPU_NUM_IRQS; i += 32) { gc = irq_get_domain_generic_chip(ipu->domain, i); gc->reg_base = ipu->cm_reg; |