summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/rfkill.txt137
-rw-r--r--drivers/net/wireless/ath/ath5k/pcu.c5
-rw-r--r--drivers/net/wireless/ath/ath9k/Kconfig1
-rw-r--r--drivers/net/wireless/ath/ath9k/ath9k.h10
-rw-r--r--drivers/net/wireless/ath/ath9k/hw.c29
-rw-r--r--drivers/net/wireless/ath/ath9k/hw.h3
-rw-r--r--drivers/net/wireless/ath/ath9k/main.c130
-rw-r--r--drivers/net/wireless/ath/ath9k/recv.c1
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn.c1
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-core.c141
-rw-r--r--drivers/net/wireless/iwlwifi/iwl3945-base.c4
-rw-r--r--drivers/net/wireless/libertas/if_spi.c11
-rw-r--r--drivers/platform/x86/dell-laptop.c2
-rw-r--r--drivers/platform/x86/sony-laptop.c5
-rw-r--r--net/mac80211/debugfs.c25
-rw-r--r--net/mac80211/ieee80211_i.h2
-rw-r--r--net/mac80211/mlme.c38
-rw-r--r--net/mac80211/util.c25
-rw-r--r--net/mac80211/wext.c31
19 files changed, 304 insertions, 297 deletions
diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt
index 1b74b5f30af4..c8acd8659e91 100644
--- a/Documentation/rfkill.txt
+++ b/Documentation/rfkill.txt
@@ -3,9 +3,8 @@ rfkill - RF kill switch support
1. Introduction
2. Implementation details
-3. Kernel driver guidelines
-4. Kernel API
-5. Userspace support
+3. Kernel API
+4. Userspace support
1. Introduction
@@ -19,82 +18,62 @@ disable all transmitters of a certain type (or all). This is intended for
situations where transmitters need to be turned off, for example on
aircraft.
+The rfkill subsystem has a concept of "hard" and "soft" block, which
+differ little in their meaning (block == transmitters off) but rather in
+whether they can be changed or not:
+ - hard block: read-only radio block that cannot be overriden by software
+ - soft block: writable radio block (need not be readable) that is set by
+ the system software.
2. Implementation details
-The rfkill subsystem is composed of various components: the rfkill class, the
-rfkill-input module (an input layer handler), and some specific input layer
-events.
-
-The rfkill class is provided for kernel drivers to register their radio
-transmitter with the kernel, provide methods for turning it on and off and,
-optionally, letting the system know about hardware-disabled states that may
-be implemented on the device. This code is enabled with the CONFIG_RFKILL
-Kconfig option, which drivers can "select".
-
-The rfkill class code also notifies userspace of state changes, this is
-achieved via uevents. It also provides some sysfs files for userspace to
-check the status of radio transmitters. See the "Userspace support" section
-below.
+The rfkill subsystem is composed of three main components:
+ * the rfkill core,
+ * the deprecated rfkill-input module (an input layer handler, being
+ replaced by userspace policy code) and
+ * the rfkill drivers.
+The rfkill core provides API for kernel drivers to register their radio
+transmitter with the kernel, methods for turning it on and off and, letting
+the system know about hardware-disabled states that may be implemented on
+the device.
-The rfkill-input code implements a basic response to rfkill buttons -- it
-implements turning on/off all devices of a certain class (or all).
+The rfkill core code also notifies userspace of state changes, and provides
+ways for userspace to query the current states. See the "Userspace support"
+section below.
When the device is hard-blocked (either by a call to rfkill_set_hw_state()
-or from query_hw_block) set_block() will be invoked but drivers can well
-ignore the method call since they can use the return value of the function
-rfkill_set_hw_state() to sync the software state instead of keeping track
-of calls to set_block().
-
-
-The entire functionality is spread over more than one subsystem:
-
- * The kernel input layer generates KEY_WWAN, KEY_WLAN etc. and
- SW_RFKILL_ALL -- when the user presses a button. Drivers for radio
- transmitters generally do not register to the input layer, unless the
- device really provides an input device (i.e. a button that has no
- effect other than generating a button press event)
-
- * The rfkill-input code hooks up to these events and switches the soft-block
- of the various radio transmitters, depending on the button type.
-
- * The rfkill drivers turn off/on their transmitters as requested.
-
- * The rfkill class will generate userspace notifications (uevents) to tell
- userspace what the current state is.
+or from query_hw_block) set_block() will be invoked for additional software
+block, but drivers can ignore the method call since they can use the return
+value of the function rfkill_set_hw_state() to sync the software state
+instead of keeping track of calls to set_block(). In fact, drivers should
+use the return value of rfkill_set_hw_state() unless the hardware actually
+keeps track of soft and hard block separately.
+3. Kernel API
-3. Kernel driver guidelines
-
-Drivers for radio transmitters normally implement only the rfkill class.
-These drivers may not unblock the transmitter based on own decisions, they
-should act on information provided by the rfkill class only.
+Drivers for radio transmitters normally implement an rfkill driver.
Platform drivers might implement input devices if the rfkill button is just
that, a button. If that button influences the hardware then you need to
-implement an rfkill class instead. This also applies if the platform provides
+implement an rfkill driver instead. This also applies if the platform provides
a way to turn on/off the transmitter(s).
-During suspend/hibernation, transmitters should only be left enabled when
-wake-on wlan or similar functionality requires it and the device wasn't
-blocked before suspend/hibernate. Note that it may be necessary to update
-the rfkill subsystem's idea of what the current state is at resume time if
-the state may have changed over suspend.
-
+For some platforms, it is possible that the hardware state changes during
+suspend/hibernation, in which case it will be necessary to update the rfkill
+core with the current state is at resume time.
+To create an rfkill driver, driver's Kconfig needs to have
-4. Kernel API
+ depends on RFKILL || !RFKILL
-To build a driver with rfkill subsystem support, the driver should depend on
-(or select) the Kconfig symbol RFKILL.
-
-The hardware the driver talks to may be write-only (where the current state
-of the hardware is unknown), or read-write (where the hardware can be queried
-about its current state).
+to ensure the driver cannot be built-in when rfkill is modular. The !RFKILL
+case allows the driver to be built when rfkill is not configured, which which
+case all rfkill API can still be used but will be provided by static inlines
+which compile to almost nothing.
Calling rfkill_set_hw_state() when a state change happens is required from
rfkill drivers that control devices that can be hard-blocked unless they also
@@ -105,10 +84,33 @@ device). Don't do this unless you cannot get the event in any other way.
5. Userspace support
-The following sysfs entries exist for every rfkill device:
+The recommended userspace interface to use is /dev/rfkill, which is a misc
+character device that allows userspace to obtain and set the state of rfkill
+devices and sets of devices. It also notifies userspace about device addition
+and removal. The API is a simple read/write API that is defined in
+linux/rfkill.h, with one ioctl that allows turning off the deprecated input
+handler in the kernel for the transition period.
+
+Except for the one ioctl, communication with the kernel is done via read()
+and write() of instances of 'struct rfkill_event'. In this structure, the
+soft and hard block are properly separated (unlike sysfs, see below) and
+userspace is able to get a consistent snapshot of all rfkill devices in the
+system. Also, it is possible to switch all rfkill drivers (or all drivers of
+a specified type) into a state which also updates the default state for
+hotplugged devices.
+
+After an application opens /dev/rfkill, it can read the current state of
+all devices, and afterwards can poll the descriptor for hotplug or state
+change events.
+
+Applications must ignore operations (the "op" field) they do not handle,
+this allows the API to be extended in the future.
+
+Additionally, each rfkill device is registered in sysfs and there has the
+following attributes:
name: Name assigned by driver to this key (interface or driver name).
- type: Name of the key type ("wlan", "bluetooth", etc).
+ type: Driver type string ("wlan", "bluetooth", etc).
state: Current state of the transmitter
0: RFKILL_STATE_SOFT_BLOCKED
transmitter is turned off by software
@@ -117,7 +119,12 @@ The following sysfs entries exist for every rfkill device:
2: RFKILL_STATE_HARD_BLOCKED
transmitter is forced off by something outside of
the driver's control.
- claim: 0: Kernel handles events (currently always reads that value)
+ This file is deprecated because it can only properly show
+ three of the four possible states, soft-and-hard-blocked is
+ missing.
+ claim: 0: Kernel handles events
+ This file is deprecated because there no longer is a way to
+ claim just control over a single rfkill instance.
rfkill devices also issue uevents (with an action of "change"), with the
following environment variables set:
@@ -128,9 +135,3 @@ RFKILL_TYPE
The contents of these variables corresponds to the "name", "state" and
"type" sysfs files explained above.
-
-An alternative userspace interface exists as a misc device /dev/rfkill,
-which allows userspace to obtain and set the state of rfkill devices and
-sets of devices. It also notifies userspace about device addition and
-removal. The API is a simple read/write API that is defined in
-linux/rfkill.h.
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index ec35503f6a40..2942f13c9c4a 100644
--- a/drivers/net/wireless/ath/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -733,8 +733,9 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
/*
* Set the beacon register and enable all timers.
*/
- /* When in AP mode zero timer0 to start TSF */
- if (ah->ah_op_mode == NL80211_IFTYPE_AP)
+ /* When in AP or Mesh Point mode zero timer0 to start TSF */
+ if (ah->ah_op_mode == NL80211_IFTYPE_AP ||
+ ah->ah_op_mode == NL80211_IFTYPE_MESH_POINT)
ath5k_hw_reg_write(ah, 0, AR5K_TIMER0);
ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0);
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 0ed1ac312aa6..2d79610bce12 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -1,7 +1,6 @@
config ATH9K
tristate "Atheros 802.11n wireless cards support"
depends on PCI && MAC80211 && WLAN_80211
- depends on RFKILL || RFKILL=n
select ATH_COMMON
select MAC80211_LEDS
select LEDS_CLASS
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 515880aa2116..5efc9345ca0d 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -21,7 +21,6 @@
#include <linux/device.h>
#include <net/mac80211.h>
#include <linux/leds.h>
-#include <linux/rfkill.h>
#include "hw.h"
#include "rc.h"
@@ -460,12 +459,6 @@ struct ath_led {
bool registered;
};
-struct ath_rfkill {
- struct rfkill *rfkill;
- struct rfkill_ops ops;
- char rfkill_name[32];
-};
-
/********************/
/* Main driver core */
/********************/
@@ -505,7 +498,6 @@ struct ath_rfkill {
#define SC_OP_PROTECT_ENABLE BIT(6)
#define SC_OP_RXFLUSH BIT(7)
#define SC_OP_LED_ASSOCIATED BIT(8)
-#define SC_OP_RFKILL_REGISTERED BIT(9)
#define SC_OP_WAIT_FOR_BEACON BIT(12)
#define SC_OP_LED_ON BIT(13)
#define SC_OP_SCANNING BIT(14)
@@ -591,7 +583,6 @@ struct ath_softc {
int beacon_interval;
- struct ath_rfkill rf_kill;
struct ath_ani ani;
struct ath9k_node_stats nodestats;
#ifdef CONFIG_ATH9K_DEBUG
@@ -677,6 +668,7 @@ static inline void ath9k_ps_restore(struct ath_softc *sc)
if (atomic_dec_and_test(&sc->ps_usecount))
if ((sc->hw->conf.flags & IEEE80211_CONF_PS) &&
!(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
+ SC_OP_WAIT_FOR_CAB |
SC_OP_WAIT_FOR_PSPOLL_DATA |
SC_OP_WAIT_FOR_TX_ACK)))
ath9k_hw_setpower(sc->sc_ah,
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 1579c9407ed5..34935a8ee59d 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -2186,6 +2186,18 @@ static void ath9k_hw_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan
REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask);
}
+static void ath9k_enable_rfkill(struct ath_hw *ah)
+{
+ REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
+ AR_GPIO_INPUT_EN_VAL_RFSILENT_BB);
+
+ REG_CLR_BIT(ah, AR_GPIO_INPUT_MUX2,
+ AR_GPIO_INPUT_MUX2_RFSILENT);
+
+ ath9k_hw_cfg_gpio_input(ah, ah->rfkill_gpio);
+ REG_SET_BIT(ah, AR_PHY_TEST, RFSILENT_BB);
+}
+
int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
bool bChannelChange)
{
@@ -2313,10 +2325,9 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
ath9k_hw_init_interrupt_masks(ah, ah->opmode);
ath9k_hw_init_qos(ah);
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
if (ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
ath9k_enable_rfkill(ah);
-#endif
+
ath9k_hw_init_user_settings(ah);
REG_WRITE(ah, AR_STA_ID1,
@@ -3613,20 +3624,6 @@ void ath9k_hw_set_gpio(struct ath_hw *ah, u32 gpio, u32 val)
AR_GPIO_BIT(gpio));
}
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-void ath9k_enable_rfkill(struct ath_hw *ah)
-{
- REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
- AR_GPIO_INPUT_EN_VAL_RFSILENT_BB);
-
- REG_CLR_BIT(ah, AR_GPIO_INPUT_MUX2,
- AR_GPIO_INPUT_MUX2_RFSILENT);
-
- ath9k_hw_cfg_gpio_input(ah, ah->rfkill_gpio);
- REG_SET_BIT(ah, AR_PHY_TEST, RFSILENT_BB);
-}
-#endif
-
u32 ath9k_hw_getdefantenna(struct ath_hw *ah)
{
return REG_READ(ah, AR_DEF_ANTENNA) & 0x7;
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index dd8508ef6e05..9d0b31ad4603 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -565,9 +565,6 @@ u32 ath9k_hw_gpio_get(struct ath_hw *ah, u32 gpio);
void ath9k_hw_cfg_output(struct ath_hw *ah, u32 gpio,
u32 ah_signal_type);
void ath9k_hw_set_gpio(struct ath_hw *ah, u32 gpio, u32 val);
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-void ath9k_enable_rfkill(struct ath_hw *ah);
-#endif
u32 ath9k_hw_getdefantenna(struct ath_hw *ah);
void ath9k_hw_setantenna(struct ath_hw *ah, u32 antenna);
bool ath9k_hw_setantennaswitch(struct ath_hw *ah,
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index f7baa406918b..9f49a3251d4d 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -231,6 +231,19 @@ static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band)
}
}
+static struct ath9k_channel *ath_get_curchannel(struct ath_softc *sc,
+ struct ieee80211_hw *hw)
+{
+ struct ieee80211_channel *curchan = hw->conf.channel;
+ struct ath9k_channel *channel;
+ u8 chan_idx;
+
+ chan_idx = curchan->hw_value;
+ channel = &sc->sc_ah->channels[chan_idx];
+ ath9k_update_ichannel(sc, hw, channel);
+ return channel;
+}
+
/*
* Set/change channels. If the channel is really being changed, it's done
* by reseting the chip. To accomplish this we must first cleanup any pending
@@ -283,7 +296,7 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
"reset status %d\n",
channel->center_freq, r);
spin_unlock_bh(&sc->sc_resetlock);
- return r;
+ goto ps_restore;
}
spin_unlock_bh(&sc->sc_resetlock);
@@ -292,14 +305,17 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
if (ath_startrecv(sc) != 0) {
DPRINTF(sc, ATH_DBG_FATAL,
"Unable to restart recv logic\n");
- return -EIO;
+ r = -EIO;
+ goto ps_restore;
}
ath_cache_conf_rate(sc, &hw->conf);
ath_update_txpow(sc);
ath9k_hw_set_interrupts(ah, sc->imask);
+
+ ps_restore:
ath9k_ps_restore(sc);
- return 0;
+ return r;
}
/*
@@ -1110,6 +1126,9 @@ void ath_radio_enable(struct ath_softc *sc)
ath9k_ps_wakeup(sc);
ath9k_hw_configpcipowersave(ah, 0);
+ if (!ah->curchan)
+ ah->curchan = ath_get_curchannel(sc, sc->hw);
+
spin_lock_bh(&sc->sc_resetlock);
r = ath9k_hw_reset(ah, ah->curchan, false);
if (r) {
@@ -1162,6 +1181,9 @@ void ath_radio_disable(struct ath_softc *sc)
ath_stoprecv(sc); /* turn off frame recv */
ath_flushrecv(sc); /* flush recv queue */
+ if (!ah->curchan)
+ ah->curchan = ath_get_curchannel(sc, sc->hw);
+
spin_lock_bh(&sc->sc_resetlock);
r = ath9k_hw_reset(ah, ah->curchan, false);
if (r) {
@@ -1178,8 +1200,6 @@ void ath_radio_disable(struct ath_softc *sc)
ath9k_ps_restore(sc);
}
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-
/*******************/
/* Rfkill */
/*******************/
@@ -1192,81 +1212,27 @@ static bool ath_is_rfkill_set(struct ath_softc *sc)
ah->rfkill_polarity;
}
-/* s/w rfkill handlers */
-static int ath_rfkill_set_block(void *data, bool blocked)
+static void ath9k_rfkill_poll_state(struct ieee80211_hw *hw)
{
- struct ath_softc *sc = data;
-
- if (blocked)
- ath_radio_disable(sc);
- else
- ath_radio_enable(sc);
-
- return 0;
-}
-
-static void ath_rfkill_poll_state(struct rfkill *rfkill, void *data)
-{
- struct ath_softc *sc = data;
+ struct ath_wiphy *aphy = hw->priv;
+ struct ath_softc *sc = aphy->sc;
bool blocked = !!ath_is_rfkill_set(sc);
- if (rfkill_set_hw_state(rfkill, blocked))
+ wiphy_rfkill_set_hw_state(hw->wiphy, blocked);
+
+ if (blocked)
ath_radio_disable(sc);
else
ath_radio_enable(sc);
}
-/* Init s/w rfkill */
-static int ath_init_sw_rfkill(struct ath_softc *sc)
-{
- sc->rf_kill.ops.set_block = ath_rfkill_set_block;
- if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
- sc->rf_kill.ops.poll = ath_rfkill_poll_state;
-
- snprintf(sc->rf_kill.rfkill_name, sizeof(sc->rf_kill.rfkill_name),
- "ath9k-%s::rfkill", wiphy_name(sc->hw->wiphy));
-
- sc->rf_kill.rfkill = rfkill_alloc(sc->rf_kill.rfkill_name,
- wiphy_dev(sc->hw->wiphy),
- RFKILL_TYPE_WLAN,
- &sc->rf_kill.ops, sc);
- if (!sc->rf_kill.rfkill) {
- DPRINTF(sc, ATH_DBG_FATAL, "Failed to allocate rfkill\n");
- return -ENOMEM;
- }
-
- return 0;
-}
-
-/* Deinitialize rfkill */
-static void ath_deinit_rfkill(struct ath_softc *sc)
-{
- if (sc->sc_flags & SC_OP_RFKILL_REGISTERED) {
- rfkill_unregister(sc->rf_kill.rfkill);
- rfkill_destroy(sc->rf_kill.rfkill);
- sc->sc_flags &= ~SC_OP_RFKILL_REGISTERED;
- }
-}
-
-static int ath_start_rfkill_poll(struct ath_softc *sc)
+static void ath_start_rfkill_poll(struct ath_softc *sc)
{
- if (!(sc->sc_flags & SC_OP_RFKILL_REGISTERED)) {
- if (rfkill_register(sc->rf_kill.rfkill)) {
- DPRINTF(sc, ATH_DBG_FATAL,
- "Unable to register rfkill\n");
- rfkill_destroy(sc->rf_kill.rfkill);
-
- /* Deinitialize the device */
- ath_cleanup(sc);
- return -EIO;
- } else {
- sc->sc_flags |= SC_OP_RFKILL_REGISTERED;
- }
- }
+ struct ath_hw *ah = sc->sc_ah;
- return 0;
+ if (ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
+ wiphy_rfkill_start_polling(sc->hw->wiphy);
}
-#endif /* CONFIG_RFKILL */
void ath_cleanup(struct ath_softc *sc)
{
@@ -1286,9 +1252,6 @@ void ath_detach(struct ath_softc *sc)
DPRINTF(sc, ATH_DBG_CONFIG, "Detach ATH hw\n");
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
- ath_deinit_rfkill(sc);
-#endif
ath_deinit_leds(sc);
cancel_work_sync(&sc->chan_work);
cancel_delayed_work_sync(&sc->wiphy_work);
@@ -1626,13 +1589,6 @@ int ath_attach(u16 devid, struct ath_softc *sc)
if (error != 0)
goto error_attach;
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
- /* Initialize s/w rfkill */
- error = ath_init_sw_rfkill(sc);
- if (error)
- goto error_attach;
-#endif
-
INIT_WORK(&sc->chan_work, ath9k_wiphy_chan_work);
INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work);
sc->wiphy_scheduler_int = msecs_to_jiffies(500);
@@ -1648,6 +1604,7 @@ int ath_attach(u16 devid, struct ath_softc *sc)
/* Initialize LED control */
ath_init_leds(sc);
+ ath_start_rfkill_poll(sc);
return 0;
@@ -1920,7 +1877,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
struct ath_softc *sc = aphy->sc;
struct ieee80211_channel *curchan = hw->conf.channel;
struct ath9k_channel *init_channel;
- int r, pos;
+ int r;
DPRINTF(sc, ATH_DBG_CONFIG, "Starting driver with "
"initial channel: %d MHz\n", curchan->center_freq);
@@ -1950,11 +1907,9 @@ static int ath9k_start(struct ieee80211_hw *hw)
/* setup initial channel */
- pos = curchan->hw_value;
+ sc->chan_idx = curchan->hw_value;
- sc->chan_idx = pos;
- init_channel = &sc->sc_ah->channels[pos];
- ath9k_update_ichannel(sc, hw, init_channel);
+ init_channel = ath_get_curchannel(sc, hw);
/* Reset SERDES registers */
ath9k_hw_configpcipowersave(sc->sc_ah, 0);
@@ -2018,10 +1973,6 @@ static int ath9k_start(struct ieee80211_hw *hw)
ieee80211_wake_queues(hw);
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
- r = ath_start_rfkill_poll(sc);
-#endif
-
mutex_unlock:
mutex_unlock(&sc->mutex);
@@ -2159,7 +2110,7 @@ static void ath9k_stop(struct ieee80211_hw *hw)
} else
sc->rx.rxlink = NULL;
- rfkill_pause_polling(sc->rf_kill.rfkill);
+ wiphy_rfkill_stop_polling(sc->hw->wiphy);
/* disable HAL and put h/w to sleep */
ath9k_hw_disable(sc->sc_ah);
@@ -2765,6 +2716,7 @@ struct ieee80211_ops ath9k_ops = {
.ampdu_action = ath9k_ampdu_action,
.sw_scan_start = ath9k_sw_scan_start,
.sw_scan_complete = ath9k_sw_scan_complete,
+ .rfkill_poll = ath9k_rfkill_poll_state,
};
static struct {
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 5014a19b0f75..f99f3a76df3f 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -817,6 +817,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)
}
if (unlikely(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
+ SC_OP_WAIT_FOR_CAB |
SC_OP_WAIT_FOR_PSPOLL_DATA)))
ath_rx_ps(sc, skb);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index a5637c4aa85d..6d1519e1f011 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2152,7 +2152,6 @@ static int iwl_mac_start(struct ieee80211_hw *hw)
/* we should be verifying the device is ready to be opened */
mutex_lock(&priv->mutex);
- memset(&priv->staging_rxon, 0, sizeof(struct iwl_rxon_cmd));
/* fetch ucode file from disk, alloc and copy to bus-master buffers ...
* ucode filename and max sizes are card-specific. */
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index f9d16ca5b3d9..6ab07165ea28 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -629,13 +629,9 @@ u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv,
if (!sta_ht_inf->ht_supported)
return 0;
}
-
- if (iwl_ht_conf->ht_protection & IEEE80211_HT_OP_MODE_PROTECTION_20MHZ)
- return 1;
- else
- return iwl_is_channel_extension(priv, priv->band,
- le16_to_cpu(priv->staging_rxon.channel),
- iwl_ht_conf->extension_chan_offset);
+ return iwl_is_channel_extension(priv, priv->band,
+ le16_to_cpu(priv->staging_rxon.channel),
+ iwl_ht_conf->extension_chan_offset);
}
EXPORT_SYMBOL(iwl_is_fat_tx_allowed);
@@ -826,9 +822,18 @@ void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info)
RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
if (iwl_is_fat_tx_allowed(priv, NULL)) {
/* pure 40 fat */
- if (rxon->flags & RXON_FLG_FAT_PROT_MSK)
+ if (ht_info->ht_protection == IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) {
rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40;
- else {
+ /* Note: control channel is opposite of extension channel */
+ switch (ht_info->extension_chan_offset) {
+ case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+ rxon->flags &= ~RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
+ break;
+ case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+ rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
+ break;
+ }
+ } else {
/* Note: control channel is opposite of extension channel */
switch (ht_info->extension_chan_offset) {
case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
@@ -2390,39 +2395,46 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw,
priv->ibss_beacon = ieee80211_beacon_get(hw, vif);
}
- if ((changes & BSS_CHANGED_BSSID) && !iwl_is_rfkill(priv)) {
- /* If there is currently a HW scan going on in the background
- * then we need to cancel it else the RXON below will fail. */
+ if (changes & BSS_CHANGED_BEACON_INT) {
+ priv->beacon_int = bss_conf->beacon_int;
+ /* TODO: in AP mode, do something to make this take effect */
+ }
+
+ if (changes & BSS_CHANGED_BSSID) {
+ IWL_DEBUG_MAC80211(priv, "BSSID %pM\n", bss_conf->bssid);
+
+ /*
+ * If there is currently a HW scan going on in the
+ * background then we need to cancel it else the RXON
+ * below/in post_associate will fail.
+ */
if (iwl_scan_cancel_timeout(priv, 100)) {
- IWL_WARN(priv, "Aborted scan still in progress "
- "after 100ms\n");
+ IWL_WARN(priv, "Aborted scan still in progress after 100ms\n");
IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
mutex_unlock(&priv->mutex);
return;
}
- memcpy(priv->staging_rxon.bssid_addr,
- bss_conf->bssid, ETH_ALEN);
-
- /* TODO: Audit driver for usage of these members and see
- * if mac80211 deprecates them (priv->bssid looks like it
- * shouldn't be there, but I haven't scanned the IBSS code
- * to verify) - jpk */
- memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
-
- if (priv->iw_mode == NL80211_IFTYPE_AP)
- iwlcore_config_ap(priv);
- else {
- int rc = iwlcore_commit_rxon(priv);
- if ((priv->iw_mode == NL80211_IFTYPE_STATION) && rc)
- iwl_rxon_add_station(
- priv, priv->active_rxon.bssid_addr, 1);
+
+ /* mac80211 only sets assoc when in STATION mode */
+ if (priv->iw_mode == NL80211_IFTYPE_ADHOC ||
+ bss_conf->assoc) {
+ memcpy(priv->staging_rxon.bssid_addr,
+ bss_conf->bssid, ETH_ALEN);
+
+ /* currently needed in a few places */
+ memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
+ } else {
+ priv->staging_rxon.filter_flags &=
+ ~RXON_FILTER_ASSOC_MSK;
}
- } else if (!iwl_is_rfkill(priv)) {
- iwl_scan_cancel_timeout(priv, 100);
- priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- iwlcore_commit_rxon(priv);
+
}
+ /*
+ * This needs to be after setting the BSSID in case
+ * mac80211 decides to do both changes at once because
+ * it will invoke post_associate.
+ */
if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
changes & BSS_CHANGED_BEACON) {
struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
@@ -2431,8 +2443,6 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw,
iwl_mac_beacon_update(hw, beacon);
}
- mutex_unlock(&priv->mutex);
-
if (changes & BSS_CHANGED_ERP_PREAMBLE) {
IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n",
bss_conf->use_short_preamble);
@@ -2450,6 +2460,23 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw,
priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
}
+ if (changes & BSS_CHANGED_BASIC_RATES) {
+ /* XXX use this information
+ *
+ * To do that, remove code from iwl_set_rate() and put something
+ * like this here:
+ *
+ if (A-band)
+ priv->staging_rxon.ofdm_basic_rates =
+ bss_conf->basic_rates;
+ else
+ priv->staging_rxon.ofdm_basic_rates =
+ bss_conf->basic_rates >> 4;
+ priv->staging_rxon.cck_basic_rates =
+ bss_conf->basic_rates & 0xF;
+ */
+ }
+
if (changes & BSS_CHANGED_HT) {
iwl_ht_conf(priv, bss_conf);
@@ -2459,10 +2486,6 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw,
if (changes & BSS_CHANGED_ASSOC) {
IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc);
- /* This should never happen as this function should
- * never be called from interrupt context. */
- if (WARN_ON_ONCE(in_interrupt()))
- return;
if (bss_conf->assoc) {
priv->assoc_id = bss_conf->aid;
priv->beacon_int = bss_conf->beacon_int;
@@ -2470,27 +2493,35 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw,
priv->timestamp = bss_conf->timestamp;
priv->assoc_capability = bss_conf->assoc_capability;
- /* we have just associated, don't start scan too early
- * leave time for EAPOL exchange to complete
+ /*
+ * We have just associated, don't start scan too early
+ * leave time for EAPOL exchange to complete.
+ *
+ * XXX: do this in mac80211
*/
priv->next_scan_jiffies = jiffies +
IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
- mutex_lock(&priv->mutex);
- priv->cfg->ops->lib->post_associate(priv);
- mutex_unlock(&priv->mutex);
- } else {
+ if (!iwl_is_rfkill(priv))
+ priv->cfg->ops->lib->post_associate(priv);
+ } else
priv->assoc_id = 0;
- IWL_DEBUG_MAC80211(priv, "DISASSOC %d\n", bss_conf->assoc);
+
+ }
+
+ if (changes && iwl_is_associated(priv) && priv->assoc_id) {
+ IWL_DEBUG_MAC80211(priv, "Changes (%#x) while associated\n",
+ changes);
+ ret = iwl_send_rxon_assoc(priv);
+ if (!ret) {
+ /* Sync active_rxon with latest change. */
+ memcpy((void *)&priv->active_rxon,
+ &priv->staging_rxon,
+ sizeof(struct iwl_rxon_cmd));
}
- } else if (changes && iwl_is_associated(priv) && priv->assoc_id) {
- IWL_DEBUG_MAC80211(priv, "Associated Changes %d\n", changes);
- ret = iwl_send_rxon_assoc(priv);
- if (!ret)
- /* Sync active_rxon with latest change. */
- memcpy((void *)&priv->active_rxon,
- &priv->staging_rxon,
- sizeof(struct iwl_rxon_cmd));
}
+
+ mutex_unlock(&priv->mutex);
+
IWL_DEBUG_MAC80211(priv, "leave\n");
}
EXPORT_SYMBOL(iwl_bss_info_changed);
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 83d31606dd00..cb9bd4c8f25e 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -2498,8 +2498,7 @@ static void iwl3945_alive_start(struct iwl_priv *priv)
struct iwl3945_rxon_cmd *active_rxon =
(struct iwl3945_rxon_cmd *)(&priv->active_rxon);
- memcpy(&priv->staging_rxon, &priv->active_rxon,
- sizeof(priv->staging_rxon));
+ priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
} else {
/* Initialize our rx_config data */
@@ -3147,7 +3146,6 @@ static int iwl3945_mac_start(struct ieee80211_hw *hw)
/* we should be verifying the device is ready to be opened */
mutex_lock(&priv->mutex);
- memset(&priv->staging_rxon, 0, sizeof(priv->staging_rxon));
/* fetch ucode file from disk, alloc and copy to bus-master buffers ...
* ucode filename and max sizes are card-specific. */
diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index f8c2898d82b0..923ed58d58e7 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -812,7 +812,6 @@ out:
static void if_spi_e2h(struct if_spi_card *card)
{
int err = 0;
- unsigned long flags;
u32 cause;
struct lbs_private *priv = card->priv;
@@ -827,10 +826,7 @@ static void if_spi_e2h(struct if_spi_card *card)
/* generate a card interrupt */
spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG, IF_SPI_CIC_HOST_EVENT);
- spin_lock_irqsave(&priv->driver_lock, flags);
lbs_queue_event(priv, cause & 0xff);
- spin_unlock_irqrestore(&priv->driver_lock, flags);
-
out:
if (err)
lbs_pr_err("%s: error %d\n", __func__, err);
@@ -875,7 +871,12 @@ static int lbs_spi_thread(void *data)
err = if_spi_c2h_data(card);
if (err)
goto err;
- if (hiStatus & IF_SPI_HIST_CMD_DOWNLOAD_RDY) {
+
+ /* workaround: in PS mode, the card does not set the Command
+ * Download Ready bit, but it sets TX Download Ready. */
+ if (hiStatus & IF_SPI_HIST_CMD_DOWNLOAD_RDY ||
+ (card->priv->psstate != PS_STATE_FULL_POWER &&
+ (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY))) {
/* This means two things. First of all,
* if there was a previous command sent, the card has
* successfully received it.
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index 2faf0e14f05a..74909c4aaeea 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -177,7 +177,7 @@ dell_send_request(struct calling_interface_buffer *buffer, int class,
static int dell_rfkill_set(void *data, bool blocked)
{
struct calling_interface_buffer buffer;
- int disable = blocked ? 0 : 1;
+ int disable = blocked ? 1 : 0;
unsigned long radio = (unsigned long)data;
memset(&buffer, 0, sizeof(struct calling_interface_buffer));
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index e48d9a4506ff..dafaa4a92df5 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -1133,8 +1133,9 @@ static void sony_nc_rfkill_update()
continue;
if (hwblock) {
- if (rfkill_set_hw_state(sony_rfkill_devices[i], true))
- sony_nc_rfkill_set((void *)i, true);
+ if (rfkill_set_hw_state(sony_rfkill_devices[i], true)) {
+ /* we already know we're blocked */
+ }
continue;
}
diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c
index 11c72311f35b..6c439cd5ccea 100644
--- a/net/mac80211/debugfs.c
+++ b/net/mac80211/debugfs.c
@@ -163,6 +163,29 @@ static const struct file_operations noack_ops = {
.open = mac80211_open_file_generic
};
+static ssize_t queues_read(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ieee80211_local *local = file->private_data;
+ unsigned long flags;
+ char buf[IEEE80211_MAX_QUEUES * 20];
+ int q, res = 0;
+
+ spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+ for (q = 0; q < local->hw.queues; q++)
+ res += sprintf(buf + res, "%02d: %#.8lx/%d\n", q,
+ local->queue_stop_reasons[q],
+ __netif_subqueue_stopped(local->mdev, q));
+ spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, res);
+}
+
+static const struct file_operations queues_ops = {
+ .read = queues_read,
+ .open = mac80211_open_file_generic
+};
+
/* statistics stuff */
#define DEBUGFS_STATS_FILE(name, buflen, fmt, value...) \
@@ -298,6 +321,7 @@ void debugfs_hw_add(struct ieee80211_local *local)
DEBUGFS_ADD(total_ps_buffered);
DEBUGFS_ADD(wep_iv);
DEBUGFS_ADD(tsf);
+ DEBUGFS_ADD(queues);
DEBUGFS_ADD_MODE(reset, 0200);
DEBUGFS_ADD(noack);
@@ -350,6 +374,7 @@ void debugfs_hw_del(struct ieee80211_local *local)
DEBUGFS_DEL(total_ps_buffered);
DEBUGFS_DEL(wep_iv);
DEBUGFS_DEL(tsf);
+ DEBUGFS_DEL(queues);
DEBUGFS_DEL(reset);
DEBUGFS_DEL(noack);
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 4dbc28964196..68eb5052179a 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -783,6 +783,7 @@ struct ieee80211_local {
struct dentry *total_ps_buffered;
struct dentry *wep_iv;
struct dentry *tsf;
+ struct dentry *queues;
struct dentry *reset;
struct dentry *noack;
struct dentry *statistics;
@@ -1100,7 +1101,6 @@ void ieee802_11_parse_elems(u8 *start, size_t len,
u32 ieee802_11_parse_elems_crc(u8 *start, size_t len,
struct ieee802_11_elems *elems,
u64 filter, u32 crc);
-int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freq);
u32 ieee80211_mandatory_rates(struct ieee80211_local *local,
enum ieee80211_band band);
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index d779c57a8220..aca22b00b6a3 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1102,14 +1102,6 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta;
u32 changed = 0, config_changed = 0;
- rcu_read_lock();
-
- sta = sta_info_get(local, ifmgd->bssid);
- if (!sta) {
- rcu_read_unlock();
- return;
- }
-
if (deauth) {
ifmgd->direct_probe_tries = 0;
ifmgd->auth_tries = 0;
@@ -1120,7 +1112,11 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
netif_tx_stop_all_queues(sdata->dev);
netif_carrier_off(sdata->dev);
- ieee80211_sta_tear_down_BA_sessions(sta);
+ rcu_read_lock();
+ sta = sta_info_get(local, ifmgd->bssid);
+ if (sta)
+ ieee80211_sta_tear_down_BA_sessions(sta);
+ rcu_read_unlock();
bss = ieee80211_rx_bss_get(local, ifmgd->bssid,
conf->channel->center_freq,
@@ -1156,8 +1152,6 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
ifmgd->ssid, ifmgd->ssid_len);
}
- rcu_read_unlock();
-
ieee80211_set_wmm_default(sdata);
ieee80211_recalc_idle(local);
@@ -2223,7 +2217,10 @@ static int ieee80211_sta_config_auth(struct ieee80211_sub_if_data *sdata)
capa_mask, capa_val);
if (bss) {
- ieee80211_set_freq(sdata, bss->cbss.channel->center_freq);
+ local->oper_channel = bss->cbss.channel;
+ local->oper_channel_type = NL80211_CHAN_NO_HT;
+ ieee80211_hw_config(local, 0);
+
if (!(ifmgd->flags & IEEE80211_STA_SSID_SET))
ieee80211_sta_set_ssid(sdata, bss->ssid,
bss->ssid_len);
@@ -2445,6 +2442,14 @@ void ieee80211_sta_req_auth(struct ieee80211_sub_if_data *sdata)
ieee80211_set_disassoc(sdata, true, true,
WLAN_REASON_DEAUTH_LEAVING);
+ if (ifmgd->ssid_len == 0) {
+ /*
+ * Only allow association to be started if a valid SSID
+ * is configured.
+ */
+ return;
+ }
+
if (!(ifmgd->flags & IEEE80211_STA_EXT_SME) ||
ifmgd->state != IEEE80211_STA_MLME_ASSOCIATE)
set_bit(IEEE80211_STA_REQ_AUTH, &ifmgd->request);
@@ -2476,6 +2481,10 @@ int ieee80211_sta_set_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size
ifmgd = &sdata->u.mgd;
if (ifmgd->ssid_len != len || memcmp(ifmgd->ssid, ssid, len) != 0) {
+ if (ifmgd->state == IEEE80211_STA_MLME_ASSOCIATED)
+ ieee80211_set_disassoc(sdata, true, true,
+ WLAN_REASON_DEAUTH_LEAVING);
+
/*
* Do not use reassociation if SSID is changed (different ESS).
*/
@@ -2500,6 +2509,11 @@ int ieee80211_sta_set_bssid(struct ieee80211_sub_if_data *sdata, u8 *bssid)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ if (compare_ether_addr(bssid, ifmgd->bssid) != 0 &&
+ ifmgd->state == IEEE80211_STA_MLME_ASSOCIATED)
+ ieee80211_set_disassoc(sdata, true, true,
+ WLAN_REASON_DEAUTH_LEAVING);
+
if (is_valid_ether_addr(bssid)) {
memcpy(ifmgd->bssid, bssid, ETH_ALEN);
ifmgd->flags |= IEEE80211_STA_BSSID_SET;
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 66ce96a69f31..915e77769312 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -774,31 +774,6 @@ void ieee80211_tx_skb(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
dev_queue_xmit(skb);
}
-int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freqMHz)
-{
- int ret = -EINVAL;
- struct ieee80211_channel *chan;
- struct ieee80211_local *local = sdata->local;
-
- chan = ieee80211_get_channel(local->hw.wiphy, freqMHz);
-
- if (chan && !(chan->flags & IEEE80211_CHAN_DISABLED)) {
- if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
- chan->flags & IEEE80211_CHAN_NO_IBSS)
- return ret;
- local->oper_channel = chan;
- local->oper_channel_type = NL80211_CHAN_NO_HT;
-
- if (local->sw_scanning || local->hw_scanning)
- ret = 0;
- else
- ret = ieee80211_hw_config(
- local, IEEE80211_CONF_CHANGE_CHANNEL);
- }
-
- return ret;
-}
-
u32 ieee80211_mandatory_rates(struct ieee80211_local *local,
enum ieee80211_band band)
{
diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c
index d2d81b103341..1da81f456744 100644
--- a/net/mac80211/wext.c
+++ b/net/mac80211/wext.c
@@ -55,6 +55,8 @@ static int ieee80211_ioctl_siwfreq(struct net_device *dev,
struct iw_freq *freq, char *extra)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_channel *chan;
if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
return cfg80211_ibss_wext_siwfreq(dev, info, freq, extra);
@@ -69,17 +71,38 @@ static int ieee80211_ioctl_siwfreq(struct net_device *dev,
IEEE80211_STA_AUTO_CHANNEL_SEL;
return 0;
} else
- return ieee80211_set_freq(sdata,
+ chan = ieee80211_get_channel(local->hw.wiphy,
ieee80211_channel_to_frequency(freq->m));
} else {
int i, div = 1000000;
for (i = 0; i < freq->e; i++)
div /= 10;
- if (div > 0)
- return ieee80211_set_freq(sdata, freq->m / div);
- else
+ if (div <= 0)
return -EINVAL;
+ chan = ieee80211_get_channel(local->hw.wiphy, freq->m / div);
}
+
+ if (!chan)
+ return -EINVAL;
+
+ if (chan->flags & IEEE80211_CHAN_DISABLED)
+ return -EINVAL;
+
+ /*
+ * no change except maybe auto -> fixed, ignore the HT
+ * setting so you can fix a channel you're on already
+ */
+ if (local->oper_channel == chan)
+ return 0;
+
+ if (sdata->vif.type == NL80211_IFTYPE_STATION)
+ ieee80211_sta_req_auth(sdata);
+
+ local->oper_channel = chan;
+ local->oper_channel_type = NL80211_CHAN_NO_HT;
+ ieee80211_hw_config(local, 0);
+
+ return 0;
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 11:57:41 +0000