diff options
-rw-r--r-- | drivers/scsi/scsi_lib.c | 84 | ||||
-rw-r--r-- | drivers/scsi/sd.c | 48 | ||||
-rw-r--r-- | drivers/scsi/sr.c | 59 | ||||
-rw-r--r-- | include/scsi/scsi_driver.h | 9 | ||||
-rw-r--r-- | include/scsi/sd.h | 1 |
5 files changed, 119 insertions, 82 deletions
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 47d3cdd6ddf1..94d82cb96626 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1039,9 +1039,6 @@ static int scsi_init_io(struct scsi_cmnd *cmd) printk(KERN_ERR "req nr_sec %lu, cur_nr_sec %u\n", req->nr_sectors, req->current_nr_sectors); - /* release the command and kill it */ - scsi_release_buffers(cmd); - scsi_put_command(cmd); return BLKPREP_KILL; } @@ -1078,9 +1075,13 @@ static void scsi_blk_pc_done(struct scsi_cmnd *cmd) scsi_io_completion(cmd, cmd->request_bufflen); } -static int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req) +int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req) { struct scsi_cmnd *cmd; + int ret = scsi_prep_state_check(sdev, req); + + if (ret != BLKPREP_OK) + return ret; cmd = scsi_get_cmd_from_req(sdev, req); if (unlikely(!cmd)) @@ -1126,18 +1127,20 @@ static int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req) cmd->done = scsi_blk_pc_done; return BLKPREP_OK; } +EXPORT_SYMBOL(scsi_setup_blk_pc_cmnd); /* * Setup a REQ_TYPE_FS command. These are simple read/write request * from filesystems that still need to be translated to SCSI CDBs from * the ULD. */ -static int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req) +int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req) { struct scsi_cmnd *cmd; - struct scsi_driver *drv; - int ret; + int ret = scsi_prep_state_check(sdev, req); + if (ret != BLKPREP_OK) + return ret; /* * Filesystem requests must transfer data. */ @@ -1147,26 +1150,12 @@ static int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req) if (unlikely(!cmd)) return BLKPREP_DEFER; - ret = scsi_init_io(cmd); - if (unlikely(ret)) - return ret; - - /* - * Initialize the actual SCSI command for this request. - */ - drv = *(struct scsi_driver **)req->rq_disk->private_data; - if (unlikely(!drv->init_command(cmd))) { - scsi_release_buffers(cmd); - scsi_put_command(cmd); - return BLKPREP_KILL; - } - - return BLKPREP_OK; + return scsi_init_io(cmd); } +EXPORT_SYMBOL(scsi_setup_fs_cmnd); -static int scsi_prep_fn(struct request_queue *q, struct request *req) +int scsi_prep_state_check(struct scsi_device *sdev, struct request *req) { - struct scsi_device *sdev = q->queuedata; int ret = BLKPREP_OK; /* @@ -1212,35 +1201,25 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req) ret = BLKPREP_KILL; break; } - - if (ret != BLKPREP_OK) - goto out; } + return ret; +} +EXPORT_SYMBOL(scsi_prep_state_check); - switch (req->cmd_type) { - case REQ_TYPE_BLOCK_PC: - ret = scsi_setup_blk_pc_cmnd(sdev, req); - break; - case REQ_TYPE_FS: - ret = scsi_setup_fs_cmnd(sdev, req); - break; - default: - /* - * All other command types are not supported. - * - * Note that these days the SCSI subsystem does not use - * REQ_TYPE_SPECIAL requests anymore. These are only used - * (directly or via blk_insert_request) by non-SCSI drivers. - */ - blk_dump_rq_flags(req, "SCSI bad req"); - ret = BLKPREP_KILL; - break; - } +int scsi_prep_return(struct request_queue *q, struct request *req, int ret) +{ + struct scsi_device *sdev = q->queuedata; - out: switch (ret) { case BLKPREP_KILL: req->errors = DID_NO_CONNECT << 16; + /* release the command and kill it */ + if (req->special) { + struct scsi_cmnd *cmd = req->special; + scsi_release_buffers(cmd); + scsi_put_command(cmd); + req->special = NULL; + } break; case BLKPREP_DEFER: /* @@ -1257,6 +1236,17 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req) return ret; } +EXPORT_SYMBOL(scsi_prep_return); + +static int scsi_prep_fn(struct request_queue *q, struct request *req) +{ + struct scsi_device *sdev = q->queuedata; + int ret = BLKPREP_KILL; + + if (req->cmd_type == REQ_TYPE_BLOCK_PC) + ret = scsi_setup_blk_pc_cmnd(sdev, req); + return scsi_prep_return(q, req, ret); +} /* * scsi_dev_queue_ready: if we can send requests to sdev, return 1 else diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 2c6116fd4578..38a41415004b 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -240,7 +240,6 @@ static struct scsi_driver sd_template = { .shutdown = sd_shutdown, }, .rescan = sd_rescan, - .init_command = sd_init_command, }; /* @@ -331,14 +330,31 @@ static void scsi_disk_put(struct scsi_disk *sdkp) * * Returns 1 if successful and 0 if error (or cannot be done now). **/ -static int sd_init_command(struct scsi_cmnd * SCpnt) +static int sd_prep_fn(struct request_queue *q, struct request *rq) { - struct scsi_device *sdp = SCpnt->device; - struct request *rq = SCpnt->request; + struct scsi_cmnd *SCpnt; + struct scsi_device *sdp = q->queuedata; struct gendisk *disk = rq->rq_disk; sector_t block = rq->sector; - unsigned int this_count = SCpnt->request_bufflen >> 9; + unsigned int this_count = rq->nr_sectors; unsigned int timeout = sdp->timeout; + int ret; + + if (rq->cmd_type == REQ_TYPE_BLOCK_PC) { + ret = scsi_setup_blk_pc_cmnd(sdp, rq); + goto out; + } else if (rq->cmd_type != REQ_TYPE_FS) { + ret = BLKPREP_KILL; + goto out; + } + ret = scsi_setup_fs_cmnd(sdp, rq); + if (ret != BLKPREP_OK) + goto out; + SCpnt = rq->special; + + /* from here on until we're complete, any goto out + * is used for a killable error condition */ + ret = BLKPREP_KILL; SCSI_LOG_HLQUEUE(1, scmd_printk(KERN_INFO, SCpnt, "sd_init_command: block=%llu, " @@ -353,7 +369,7 @@ static int sd_init_command(struct scsi_cmnd * SCpnt) rq->nr_sectors)); SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "Retry with 0x%p\n", SCpnt)); - return 0; + goto out; } if (sdp->changed) { @@ -362,8 +378,9 @@ static int sd_init_command(struct scsi_cmnd * SCpnt) * the changed bit has been reset */ /* printk("SCSI disk has been changed. Prohibiting further I/O.\n"); */ - return 0; + goto out; } + SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n", (unsigned long long)block)); @@ -382,7 +399,7 @@ static int sd_init_command(struct scsi_cmnd * SCpnt) if ((block & 1) || (rq->nr_sectors & 1)) { scmd_printk(KERN_ERR, SCpnt, "Bad block number requested\n"); - return 0; + goto out; } else { block = block >> 1; this_count = this_count >> 1; @@ -392,7 +409,7 @@ static int sd_init_command(struct scsi_cmnd * SCpnt) if ((block & 3) || (rq->nr_sectors & 3)) { scmd_printk(KERN_ERR, SCpnt, "Bad block number requested\n"); - return 0; + goto out; } else { block = block >> 2; this_count = this_count >> 2; @@ -402,7 +419,7 @@ static int sd_init_command(struct scsi_cmnd * SCpnt) if ((block & 7) || (rq->nr_sectors & 7)) { scmd_printk(KERN_ERR, SCpnt, "Bad block number requested\n"); - return 0; + goto out; } else { block = block >> 3; this_count = this_count >> 3; @@ -410,7 +427,7 @@ static int sd_init_command(struct scsi_cmnd * SCpnt) } if (rq_data_dir(rq) == WRITE) { if (!sdp->writeable) { - return 0; + goto out; } SCpnt->cmnd[0] = WRITE_6; SCpnt->sc_data_direction = DMA_TO_DEVICE; @@ -419,7 +436,7 @@ static int sd_init_command(struct scsi_cmnd * SCpnt) SCpnt->sc_data_direction = DMA_FROM_DEVICE; } else { scmd_printk(KERN_ERR, SCpnt, "Unknown command %x\n", rq->cmd_flags); - return 0; + goto out; } SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, @@ -470,7 +487,7 @@ static int sd_init_command(struct scsi_cmnd * SCpnt) */ scmd_printk(KERN_ERR, SCpnt, "FUA write on READ/WRITE(6) drive\n"); - return 0; + goto out; } SCpnt->cmnd[1] |= (unsigned char) ((block >> 16) & 0x1f); @@ -501,7 +518,9 @@ static int sd_init_command(struct scsi_cmnd * SCpnt) * This indicates that the command is ready from our end to be * queued. */ - return 1; + ret = BLKPREP_OK; + out: + return scsi_prep_return(q, rq, ret); } /** @@ -1669,6 +1688,7 @@ static int sd_probe(struct device *dev) sd_revalidate_disk(gd); + blk_queue_prep_rq(sdp->request_queue, sd_prep_fn); blk_queue_issue_flush_fn(sdp->request_queue, sd_issue_flush); gd->driverfs_dev = &sdp->sdev_gendev; diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 902eb11ffe8a..a0c4e13d4dab 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -78,7 +78,6 @@ MODULE_ALIAS_SCSI_DEVICE(TYPE_WORM); static int sr_probe(struct device *); static int sr_remove(struct device *); -static int sr_init_command(struct scsi_cmnd *); static struct scsi_driver sr_template = { .owner = THIS_MODULE, @@ -87,7 +86,6 @@ static struct scsi_driver sr_template = { .probe = sr_probe, .remove = sr_remove, }, - .init_command = sr_init_command, }; static unsigned long sr_index_bits[SR_DISKS / BITS_PER_LONG]; @@ -296,19 +294,39 @@ static void rw_intr(struct scsi_cmnd * SCpnt) scsi_io_completion(SCpnt, good_bytes); } -static int sr_init_command(struct scsi_cmnd * SCpnt) +static int sr_prep_fn(struct request_queue *q, struct request *rq) { int block=0, this_count, s_size, timeout = SR_TIMEOUT; - struct scsi_cd *cd = scsi_cd(SCpnt->request->rq_disk); + struct scsi_cd *cd; + struct scsi_cmnd *SCpnt; + struct scsi_device *sdp = q->queuedata; + int ret; + + if (rq->cmd_type == REQ_TYPE_BLOCK_PC) { + ret = scsi_setup_blk_pc_cmnd(sdp, rq); + goto out; + } else if (rq->cmd_type != REQ_TYPE_FS) { + ret = BLKPREP_KILL; + goto out; + } + ret = scsi_setup_fs_cmnd(sdp, rq); + if (ret != BLKPREP_OK) + goto out; + SCpnt = rq->special; + cd = scsi_cd(rq->rq_disk); + + /* from here on until we're complete, any goto out + * is used for a killable error condition */ + ret = BLKPREP_KILL; SCSI_LOG_HLQUEUE(1, printk("Doing sr request, dev = %s, block = %d\n", cd->disk->disk_name, block)); if (!cd->device || !scsi_device_online(cd->device)) { SCSI_LOG_HLQUEUE(2, printk("Finishing %ld sectors\n", - SCpnt->request->nr_sectors)); + rq->nr_sectors)); SCSI_LOG_HLQUEUE(2, printk("Retry with 0x%p\n", SCpnt)); - return 0; + goto out; } if (cd->device->changed) { @@ -316,7 +334,7 @@ static int sr_init_command(struct scsi_cmnd * SCpnt) * quietly refuse to do anything to a changed disc until the * changed bit has been reset */ - return 0; + goto out; } /* @@ -333,21 +351,21 @@ static int sr_init_command(struct scsi_cmnd * SCpnt) if (s_size != 512 && s_size != 1024 && s_size != 2048) { scmd_printk(KERN_ERR, SCpnt, "bad sector size %d\n", s_size); - return 0; + goto out; } - if (rq_data_dir(SCpnt->request) == WRITE) { + if (rq_data_dir(rq) == WRITE) { if (!cd->device->writeable) - return 0; + goto out; SCpnt->cmnd[0] = WRITE_10; SCpnt->sc_data_direction = DMA_TO_DEVICE; cd->cdi.media_written = 1; - } else if (rq_data_dir(SCpnt->request) == READ) { + } else if (rq_data_dir(rq) == READ) { SCpnt->cmnd[0] = READ_10; SCpnt->sc_data_direction = DMA_FROM_DEVICE; } else { - blk_dump_rq_flags(SCpnt->request, "Unknown sr command"); - return 0; + blk_dump_rq_flags(rq, "Unknown sr command"); + goto out; } { @@ -368,10 +386,10 @@ static int sr_init_command(struct scsi_cmnd * SCpnt) /* * request doesn't start on hw block boundary, add scatter pads */ - if (((unsigned int)SCpnt->request->sector % (s_size >> 9)) || + if (((unsigned int)rq->sector % (s_size >> 9)) || (SCpnt->request_bufflen % s_size)) { scmd_printk(KERN_NOTICE, SCpnt, "unaligned transfer\n"); - return 0; + goto out; } this_count = (SCpnt->request_bufflen >> 9) / (s_size >> 9); @@ -379,12 +397,12 @@ static int sr_init_command(struct scsi_cmnd * SCpnt) SCSI_LOG_HLQUEUE(2, printk("%s : %s %d/%ld 512 byte blocks.\n", cd->cdi.name, - (rq_data_dir(SCpnt->request) == WRITE) ? + (rq_data_dir(rq) == WRITE) ? "writing" : "reading", - this_count, SCpnt->request->nr_sectors)); + this_count, rq->nr_sectors)); SCpnt->cmnd[1] = 0; - block = (unsigned int)SCpnt->request->sector / (s_size >> 9); + block = (unsigned int)rq->sector / (s_size >> 9); if (this_count > 0xffff) { this_count = 0xffff; @@ -419,7 +437,9 @@ static int sr_init_command(struct scsi_cmnd * SCpnt) * This indicates that the command is ready from our end to be * queued. */ - return 1; + ret = BLKPREP_OK; + out: + return scsi_prep_return(q, rq, ret); } static int sr_block_open(struct inode *inode, struct file *file) @@ -590,6 +610,7 @@ static int sr_probe(struct device *dev) /* FIXME: need to handle a get_capabilities failure properly ?? */ get_capabilities(cd); + blk_queue_prep_rq(sdev->request_queue, sr_prep_fn); sr_vendor_init(cd); disk->driverfs_dev = &sdev->sdev_gendev; diff --git a/include/scsi/scsi_driver.h b/include/scsi/scsi_driver.h index 3465f31a21c4..56a304709fde 100644 --- a/include/scsi/scsi_driver.h +++ b/include/scsi/scsi_driver.h @@ -5,13 +5,15 @@ struct module; struct scsi_cmnd; +struct scsi_device; +struct request; +struct request_queue; struct scsi_driver { struct module *owner; struct device_driver gendrv; - int (*init_command)(struct scsi_cmnd *); void (*rescan)(struct device *); }; #define to_scsi_driver(drv) \ @@ -25,4 +27,9 @@ extern int scsi_register_interface(struct class_interface *); #define scsi_unregister_interface(intf) \ class_interface_unregister(intf) +int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req); +int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req); +int scsi_prep_state_check(struct scsi_device *sdev, struct request *req); +int scsi_prep_return(struct request_queue *q, struct request *req, int ret); + #endif /* _SCSI_SCSI_DRIVER_H */ diff --git a/include/scsi/sd.h b/include/scsi/sd.h index ce02ad1f5185..aa1e71613010 100644 --- a/include/scsi/sd.h +++ b/include/scsi/sd.h @@ -55,7 +55,6 @@ static void sd_shutdown(struct device *dev); static int sd_suspend(struct device *dev, pm_message_t state); static int sd_resume(struct device *dev); static void sd_rescan(struct device *); -static int sd_init_command(struct scsi_cmnd *); static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer); static void scsi_disk_release(struct class_device *cdev); static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *); |