summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/serial/8250.c73
-rw-r--r--drivers/serial/8250.h1
-rw-r--r--drivers/serial/8250_au1x00.c102
-rw-r--r--drivers/serial/Kconfig8
-rw-r--r--drivers/serial/Makefile1
-rw-r--r--drivers/serial/serial_core.c1
-rw-r--r--include/linux/serial_8250.h1
-rw-r--r--include/linux/serial_core.h1
8 files changed, 185 insertions, 3 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index f47d2c454e33..186e96c47b3d 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -251,9 +251,53 @@ static const struct serial8250_config uart_config[] = {
},
};
+#ifdef CONFIG_SERIAL_8250_AU1X00
+
+/* Au1x00 UART hardware has a weird register layout */
+static const u8 au_io_in_map[] = {
+ [UART_RX] = 0,
+ [UART_IER] = 2,
+ [UART_IIR] = 3,
+ [UART_LCR] = 5,
+ [UART_MCR] = 6,
+ [UART_LSR] = 7,
+ [UART_MSR] = 8,
+};
+
+static const u8 au_io_out_map[] = {
+ [UART_TX] = 1,
+ [UART_IER] = 2,
+ [UART_FCR] = 4,
+ [UART_LCR] = 5,
+ [UART_MCR] = 6,
+};
+
+/* sane hardware needs no mapping */
+static inline int map_8250_in_reg(struct uart_8250_port *up, int offset)
+{
+ if (up->port.iotype != UPIO_AU)
+ return offset;
+ return au_io_in_map[offset];
+}
+
+static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
+{
+ if (up->port.iotype != UPIO_AU)
+ return offset;
+ return au_io_out_map[offset];
+}
+
+#else
+
+/* sane hardware needs no mapping */
+#define map_8250_in_reg(up, offset) (offset)
+#define map_8250_out_reg(up, offset) (offset)
+
+#endif
+
static _INLINE_ unsigned int serial_in(struct uart_8250_port *up, int offset)
{
- offset <<= up->port.regshift;
+ offset = map_8250_in_reg(up, offset) << up->port.regshift;
switch (up->port.iotype) {
case UPIO_HUB6:
@@ -266,6 +310,11 @@ static _INLINE_ unsigned int serial_in(struct uart_8250_port *up, int offset)
case UPIO_MEM32:
return readl(up->port.membase + offset);
+#ifdef CONFIG_SERIAL_8250_AU1X00
+ case UPIO_AU:
+ return __raw_readl(up->port.membase + offset);
+#endif
+
default:
return inb(up->port.iobase + offset);
}
@@ -274,7 +323,7 @@ static _INLINE_ unsigned int serial_in(struct uart_8250_port *up, int offset)
static _INLINE_ void
serial_out(struct uart_8250_port *up, int offset, int value)
{
- offset <<= up->port.regshift;
+ offset = map_8250_out_reg(up, offset) << up->port.regshift;
switch (up->port.iotype) {
case UPIO_HUB6:
@@ -290,6 +339,12 @@ serial_out(struct uart_8250_port *up, int offset, int value)
writel(value, up->port.membase + offset);
break;
+#ifdef CONFIG_SERIAL_8250_AU1X00
+ case UPIO_AU:
+ __raw_writel(value, up->port.membase + offset);
+ break;
+#endif
+
default:
outb(value, up->port.iobase + offset);
}
@@ -910,6 +965,13 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
}
}
#endif
+
+#ifdef CONFIG_SERIAL_8250_AU1X00
+ /* if access method is AU, it is a 16550 with a quirk */
+ if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
+ up->bugs |= UART_BUG_NOMSR;
+#endif
+
serial_outp(up, UART_LCR, save_lcr);
if (up->capabilities != uart_config[up->port.type].flags) {
@@ -1057,6 +1119,10 @@ static void serial8250_enable_ms(struct uart_port *port)
{
struct uart_8250_port *up = (struct uart_8250_port *)port;
+ /* no MSR capabilities */
+ if (up->bugs & UART_BUG_NOMSR)
+ return;
+
up->ier |= UART_IER_MSI;
serial_out(up, UART_IER, up->ier);
}
@@ -1774,7 +1840,8 @@ serial8250_set_termios(struct uart_port *port, struct termios *termios,
* CTS flow control flag and modem status interrupts
*/
up->ier &= ~UART_IER_MSI;
- if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+ if (!(up->bugs & UART_BUG_NOMSR) &&
+ UART_ENABLE_MS(&up->port, termios->c_cflag))
up->ier |= UART_IER_MSI;
if (up->capabilities & UART_CAP_UUE)
up->ier |= UART_IER_UUE | UART_IER_RTOIE;
diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
index b1b459efda52..a607b98016db 100644
--- a/drivers/serial/8250.h
+++ b/drivers/serial/8250.h
@@ -49,6 +49,7 @@ struct serial8250_config {
#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */
#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
+#define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */
#if defined(__i386__) && (defined(CONFIG_M386) || defined(CONFIG_M486))
#define _INLINE_ inline
diff --git a/drivers/serial/8250_au1x00.c b/drivers/serial/8250_au1x00.c
new file mode 100644
index 000000000000..06ae8fbcc947
--- /dev/null
+++ b/drivers/serial/8250_au1x00.c
@@ -0,0 +1,102 @@
+/*
+ * Serial Device Initialisation for Au1x00
+ *
+ * (C) Copyright Embedded Alley Solutions, Inc 2005
+ * Author: Pantelis Antoniou <pantelis@embeddedalley.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/serial_core.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include <linux/serial_8250.h>
+
+#include <asm/mach-au1x00/au1000.h>
+
+#include "8250.h"
+
+#define PORT(_base, _irq) \
+ { \
+ .iobase = _base, \
+ .membase = (void __iomem *)_base,\
+ .mapbase = _base, \
+ .irq = _irq, \
+ .uartclk = 0, /* filled */ \
+ .regshift = 2, \
+ .iotype = UPIO_AU, \
+ .flags = UPF_SKIP_TEST | \
+ UPF_IOREMAP, \
+ }
+
+static struct plat_serial8250_port au1x00_data[] = {
+#if defined(CONFIG_SOC_AU1000)
+ PORT(UART0_ADDR, AU1000_UART0_INT),
+ PORT(UART1_ADDR, AU1000_UART1_INT),
+ PORT(UART2_ADDR, AU1000_UART2_INT),
+ PORT(UART3_ADDR, AU1000_UART3_INT),
+#elif defined(CONFIG_SOC_AU1500)
+ PORT(UART0_ADDR, AU1500_UART0_INT),
+ PORT(UART3_ADDR, AU1500_UART3_INT),
+#elif defined(CONFIG_SOC_AU1100)
+ PORT(UART0_ADDR, AU1100_UART0_INT),
+ PORT(UART1_ADDR, AU1100_UART1_INT),
+ PORT(UART2_ADDR, AU1100_UART2_INT),
+ PORT(UART3_ADDR, AU1100_UART3_INT),
+#elif defined(CONFIG_SOC_AU1550)
+ PORT(UART0_ADDR, AU1550_UART0_INT),
+ PORT(UART1_ADDR, AU1550_UART1_INT),
+ PORT(UART2_ADDR, AU1550_UART2_INT),
+ PORT(UART3_ADDR, AU1550_UART3_INT),
+#elif defined(CONFIG_SOC_AU1200)
+ PORT(UART0_ADDR, AU1200_UART0_INT),
+ PORT(UART1_ADDR, AU1200_UART1_INT),
+#endif
+ { },
+};
+
+static struct platform_device au1x00_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_AU1X00,
+ .dev = {
+ .platform_data = au1x00_data,
+ },
+};
+
+static int __init au1x00_init(void)
+{
+ int i;
+ unsigned int uartclk;
+
+ /* get uart clock */
+ uartclk = get_au1x00_uart_baud_base() * 16;
+
+ /* fill up uartclk */
+ for (i = 0; au1x00_data[i].flags ; i++)
+ au1x00_data[i].uartclk = uartclk;
+
+ return platform_device_register(&au1x00_device);
+}
+
+/* XXX: Yes, I know this doesn't yet work. */
+static void __exit au1x00_exit(void)
+{
+ platform_device_unregister(&au1x00_device);
+}
+
+module_init(au1x00_init);
+module_exit(au1x00_exit);
+
+MODULE_AUTHOR("Pantelis Antoniou <pantelis@embeddedalley.com>");
+MODULE_DESCRIPTION("8250 serial probe module for Au1x000 cards");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index b745a1b9e835..ff36f0c9fdad 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -207,6 +207,14 @@ config SERIAL_8250_ACORN
system, say Y to this option. The driver can handle 1, 2, or 3 port
cards. If unsure, say N.
+config SERIAL_8250_AU1X00
+ bool "AU1X00 serial port support"
+ depends on SERIAL_8250 != n && SOC_AU1X00
+ help
+ If you have an Au1x00 board and want to use the serial port, say Y
+ to this option. The driver can handle 1 or 2 serial ports.
+ If unsure, say N.
+
comment "Non-8250 serial port support"
config SERIAL_AMBA_PL010
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 11c7dc483f93..d7c7c7180e33 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o
obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
+obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 0745ce782974..427a23858076 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1959,6 +1959,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
break;
case UPIO_MEM:
case UPIO_MEM32:
+ case UPIO_AU:
snprintf(address, sizeof(address),
"MMIO 0x%lx", port->mapbase);
break;
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 2b799d40d669..cee302aefdb7 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -42,6 +42,7 @@ enum {
PLAT8250_DEV_BOCA,
PLAT8250_DEV_HUB6,
PLAT8250_DEV_MCA,
+ PLAT8250_DEV_AU1X00,
};
/*
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 9d2579230689..a3ac92b19aca 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -211,6 +211,7 @@ struct uart_port {
#define UPIO_HUB6 (1)
#define UPIO_MEM (2)
#define UPIO_MEM32 (3)
+#define UPIO_AU (4) /* Au1x00 type IO */
unsigned int read_status_mask; /* driver specific */
unsigned int ignore_status_mask; /* driver specific */
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 22:08:51 +0000