summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/Changes11
-rw-r--r--Documentation/DocBook/device-drivers.tmpl2
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-omap.txt3
-rw-r--r--Documentation/devicetree/bindings/rng/qcom,prng.txt17
-rw-r--r--Documentation/gpio/board.txt115
-rw-r--r--Documentation/gpio/consumer.txt197
-rw-r--r--Documentation/gpio/driver.txt75
-rw-r--r--Documentation/gpio/gpio-legacy.txt (renamed from Documentation/gpio.txt)0
-rw-r--r--Documentation/gpio/gpio.txt119
-rw-r--r--Documentation/gpio/sysfs.txt155
-rw-r--r--arch/arm/boot/dts/bcm2835.dtsi4
-rw-r--r--arch/arm/boot/dts/cros5250-common.dtsi12
-rw-r--r--arch/arm/boot/dts/imx6qdl.dtsi2
-rw-r--r--arch/arm/boot/dts/omap-zoom-common.dtsi2
-rw-r--r--arch/arm/boot/dts/omap2.dtsi96
-rw-r--r--arch/arm/boot/dts/omap2420.dtsi23
-rw-r--r--arch/arm/boot/dts/omap2430.dtsi49
-rw-r--r--arch/arm/mach-omap2/Makefile6
-rw-r--r--arch/arm/mach-omap2/common.h1
-rw-r--r--arch/arm/mach-omap2/display.c78
-rw-r--r--arch/arm/mach-omap2/gpmc.c58
-rw-r--r--arch/arm/mach-omap2/omap-secure.h7
-rw-r--r--arch/arm/mach-omap2/omap4-common.c57
-rw-r--r--arch/arm/mach-omap2/pm34xx.c2
-rw-r--r--arch/arm/mach-omap2/prm44xx_54xx.h2
-rw-r--r--arch/arm/mach-tegra/fuse.c10
-rw-r--r--arch/arm/mach-vexpress/spc.c40
-rw-r--r--arch/arm/mach-vexpress/spc.h1
-rw-r--r--arch/arm/mach-vexpress/tc2_pm.c66
-rw-r--r--arch/powerpc/Makefile7
-rw-r--r--arch/powerpc/boot/dts/xcalibur1501.dts4
-rw-r--r--arch/powerpc/boot/dts/xpedite5301.dts4
-rw-r--r--arch/powerpc/boot/dts/xpedite5330.dts4
-rw-r--r--arch/powerpc/boot/dts/xpedite5370.dts4
-rw-r--r--arch/powerpc/boot/util.S14
-rw-r--r--arch/powerpc/include/asm/pgalloc-64.h1
-rw-r--r--arch/powerpc/include/asm/ppc_asm.h2
-rw-r--r--arch/powerpc/include/asm/reg.h7
-rw-r--r--arch/powerpc/include/asm/timex.h8
-rw-r--r--arch/powerpc/kernel/machine_kexec.c12
-rw-r--r--arch/powerpc/kernel/nvram_64.c2
-rw-r--r--arch/powerpc/kernel/signal_32.c16
-rw-r--r--arch/powerpc/kernel/signal_64.c6
-rw-r--r--arch/powerpc/kernel/vdso32/gettimeofday.S6
-rw-r--r--arch/powerpc/mm/hugetlbpage-book3e.c3
-rw-r--r--arch/powerpc/mm/tlb_nohash.c2
-rw-r--r--arch/powerpc/platforms/Kconfig.cputype20
-rw-r--r--arch/s390/crypto/aes_s390.c19
-rw-r--r--arch/x86/crypto/Makefile3
-rw-r--r--arch/x86/crypto/aesni-intel_glue.c2
-rw-r--r--arch/x86/crypto/camellia_aesni_avx2_glue.c2
-rw-r--r--arch/x86/crypto/camellia_aesni_avx_glue.c2
-rw-r--r--arch/x86/crypto/cast5_avx_glue.c2
-rw-r--r--arch/x86/crypto/cast6_avx_glue.c2
-rw-r--r--arch/x86/crypto/serpent_avx2_glue.c2
-rw-r--r--arch/x86/crypto/serpent_avx_glue.c2
-rw-r--r--arch/x86/crypto/serpent_sse2_glue.c2
-rw-r--r--arch/x86/crypto/sha256_ssse3_glue.c4
-rw-r--r--arch/x86/crypto/twofish_avx_glue.c2
-rw-r--r--arch/x86/include/asm/simd.h11
-rw-r--r--crypto/Kconfig23
-rw-r--r--crypto/Makefile8
-rw-r--r--crypto/ablk_helper.c (renamed from arch/x86/crypto/ablk_helper.c)13
-rw-r--r--crypto/ablkcipher.c21
-rw-r--r--crypto/ansi_cprng.c4
-rw-r--r--crypto/asymmetric_keys/rsa.c5
-rw-r--r--crypto/asymmetric_keys/x509_public_key.c81
-rw-r--r--crypto/authenc.c54
-rw-r--r--crypto/authencesn.c34
-rw-r--r--crypto/ccm.c4
-rw-r--r--crypto/gcm.c2
-rw-r--r--crypto/memneq.c138
-rw-r--r--drivers/acpi/acpica/acresrc.h6
-rw-r--r--drivers/acpi/acpica/nsalloc.c18
-rw-r--r--drivers/acpi/acpica/nsutils.c18
-rw-r--r--drivers/acpi/acpica/rscalc.c9
-rw-r--r--drivers/acpi/acpica/rscreate.c36
-rw-r--r--drivers/acpi/acpica/rsutils.c2
-rw-r--r--drivers/acpi/acpica/utdebug.c31
-rw-r--r--drivers/acpi/nvs.c1
-rw-r--r--drivers/acpi/pci_root.c3
-rw-r--r--drivers/acpi/scan.c2
-rw-r--r--drivers/acpi/sleep.c2
-rw-r--r--drivers/acpi/sysfs.c54
-rw-r--r--drivers/char/hw_random/Kconfig25
-rw-r--r--drivers/char/hw_random/Makefile2
-rw-r--r--drivers/char/hw_random/msm-rng.c197
-rw-r--r--drivers/char/hw_random/omap3-rom-rng.c141
-rw-r--r--drivers/char/hw_random/pseries-rng.c5
-rw-r--r--drivers/char/hw_random/via-rng.c2
-rw-r--r--drivers/cpufreq/exynos4210-cpufreq.c1
-rw-r--r--drivers/cpufreq/exynos4x12-cpufreq.c1
-rw-r--r--drivers/cpufreq/exynos5250-cpufreq.c1
-rw-r--r--drivers/cpufreq/tegra-cpufreq.c4
-rw-r--r--drivers/crypto/caam/Kconfig25
-rw-r--r--drivers/crypto/caam/Makefile4
-rw-r--r--drivers/crypto/caam/caamalg.c83
-rw-r--r--drivers/crypto/caam/caamhash.c88
-rw-r--r--drivers/crypto/caam/caamrng.c29
-rw-r--r--drivers/crypto/caam/ctrl.c418
-rw-r--r--drivers/crypto/caam/desc.h17
-rw-r--r--drivers/crypto/caam/intern.h20
-rw-r--r--drivers/crypto/caam/jr.c339
-rw-r--r--drivers/crypto/caam/jr.h5
-rw-r--r--drivers/crypto/caam/regs.h14
-rw-r--r--drivers/crypto/caam/sg_sw_sec4.h34
-rw-r--r--drivers/crypto/dcp.c49
-rw-r--r--drivers/crypto/ixp4xx_crypto.c26
-rw-r--r--drivers/crypto/mv_cesa.c14
-rw-r--r--drivers/crypto/omap-aes.c6
-rw-r--r--drivers/crypto/omap-sham.c1
-rw-r--r--drivers/crypto/picoxcell_crypto.c32
-rw-r--r--drivers/crypto/sahara.c2
-rw-r--r--drivers/crypto/talitos.c35
-rw-r--r--drivers/crypto/tegra-aes.c26
-rw-r--r--drivers/gpio/gpio-bcm-kona.c2
-rw-r--r--drivers/gpio/gpio-msm-v2.c2
-rw-r--r--drivers/gpio/gpio-mvebu.c2
-rw-r--r--drivers/gpio/gpio-pl061.c10
-rw-r--r--drivers/gpio/gpio-rcar.c2
-rw-r--r--drivers/gpio/gpio-tb10x.c1
-rw-r--r--drivers/gpio/gpio-twl4030.c13
-rw-r--r--drivers/gpio/gpio-ucb1400.c1
-rw-r--r--drivers/gpio/gpiolib.c58
-rw-r--r--drivers/gpu/drm/drm_sysfs.c2
-rw-r--r--drivers/gpu/drm/nouveau/nouveau_hwmon.c1
-rw-r--r--drivers/gpu/drm/qxl/qxl_release.c1
-rw-r--r--drivers/hid/Kconfig1
-rw-r--r--drivers/hid/hid-appleir.c3
-rw-r--r--drivers/hid/hid-core.c2
-rw-r--r--drivers/hid/hid-ids.h5
-rw-r--r--drivers/hid/hid-kye.c13
-rw-r--r--drivers/hid/hid-multitouch.c6
-rw-r--r--drivers/hid/hid-sony.c53
-rw-r--r--drivers/hid/hid-wiimote-core.c5
-rw-r--r--drivers/hid/uhid.c2
-rw-r--r--drivers/hwmon/asus_atk0110.c1
-rw-r--r--drivers/i2c/busses/i2c-omap.c22
-rw-r--r--drivers/iio/accel/hid-sensor-accel-3d.c5
-rw-r--r--drivers/iio/accel/kxsd9.c7
-rw-r--r--drivers/iio/adc/at91_adc.c1
-rw-r--r--drivers/iio/adc/mcp3422.c8
-rw-r--r--drivers/iio/adc/ti_am335x_adc.c7
-rw-r--r--drivers/iio/common/hid-sensors/hid-sensor-trigger.c9
-rw-r--r--drivers/iio/common/hid-sensors/hid-sensor-trigger.h2
-rw-r--r--drivers/iio/gyro/hid-sensor-gyro-3d.c5
-rw-r--r--drivers/iio/light/Kconfig2
-rw-r--r--drivers/iio/light/hid-sensor-als.c5
-rw-r--r--drivers/iio/magnetometer/Kconfig2
-rw-r--r--drivers/iio/magnetometer/hid-sensor-magn-3d.c5
-rw-r--r--drivers/iio/magnetometer/mag3110.c7
-rw-r--r--drivers/input/misc/hp_sdc_rtc.c5
-rw-r--r--drivers/input/touchscreen/Kconfig11
-rw-r--r--drivers/input/touchscreen/Makefile1
-rw-r--r--drivers/input/touchscreen/atmel-wm97xx.c2
-rw-r--r--drivers/input/touchscreen/cyttsp4_core.c3
-rw-r--r--drivers/input/touchscreen/sur40.c466
-rw-r--r--drivers/macintosh/Makefile1
-rw-r--r--drivers/md/md.c2
-rw-r--r--drivers/md/raid5.c13
-rw-r--r--drivers/ntb/ntb_hw.c121
-rw-r--r--drivers/ntb/ntb_hw.h7
-rw-r--r--drivers/ntb/ntb_regs.h16
-rw-r--r--drivers/ntb/ntb_transport.c77
-rw-r--r--drivers/pci/quirks.c4
-rw-r--r--drivers/platform/x86/sony-laptop.c27
-rw-r--r--drivers/regulator/arizona-micsupp.c54
-rw-r--r--drivers/regulator/core.c3
-rw-r--r--drivers/regulator/gpio-regulator.c7
-rw-r--r--drivers/regulator/pfuze100-regulator.c12
-rw-r--r--drivers/staging/btmtk_usb/btmtk_usb.c3
-rw-r--r--drivers/staging/comedi/drivers/pcl730.c6
-rw-r--r--drivers/staging/comedi/drivers/s626.c2
-rw-r--r--drivers/staging/comedi/drivers/vmk80xx.c2
-rw-r--r--drivers/staging/ft1000/ft1000-usb/ft1000_download.c3
-rw-r--r--drivers/staging/iio/magnetometer/Kconfig2
-rw-r--r--drivers/staging/imx-drm/Makefile4
-rw-r--r--drivers/staging/imx-drm/imx-drm-core.c1
-rw-r--r--drivers/staging/lustre/lustre/ptlrpc/pinger.c4
-rw-r--r--drivers/staging/media/go7007/go7007-usb.c28
-rw-r--r--drivers/staging/nvec/nvec.c3
-rw-r--r--drivers/staging/rtl8188eu/core/rtw_ap.c3
-rw-r--r--drivers/staging/tidspbridge/Kconfig2
-rw-r--r--drivers/staging/vt6655/hostap.c3
-rw-r--r--drivers/staging/vt6656/baseband.c11
-rw-r--r--drivers/staging/vt6656/hostap.c3
-rw-r--r--drivers/staging/vt6656/rndis.h2
-rw-r--r--drivers/staging/zram/zram_drv.c19
-rw-r--r--drivers/staging/zsmalloc/zsmalloc-main.c17
-rw-r--r--drivers/tty/amiserial.c3
-rw-r--r--drivers/tty/n_tty.c16
-rw-r--r--drivers/tty/serial/8250/Kconfig2
-rw-r--r--drivers/tty/serial/pmac_zilog.c3
-rw-r--r--drivers/tty/tty_io.c1
-rw-r--r--fs/affs/Changes2
-rw-r--r--fs/ceph/addr.c2
-rw-r--r--fs/ceph/cache.c3
-rw-r--r--fs/ceph/caps.c27
-rw-r--r--fs/ceph/dir.c11
-rw-r--r--fs/ceph/inode.c49
-rw-r--r--fs/ceph/mds_client.c61
-rw-r--r--fs/ceph/mds_client.h1
-rw-r--r--fs/ceph/super.h8
-rw-r--r--fs/cifs/cifsglob.h1
-rw-r--r--fs/cifs/ioctl.c6
-rw-r--r--fs/cifs/smb2ops.c99
-rw-r--r--fs/cifs/smb2pdu.c92
-rw-r--r--fs/cifs/smb2pdu.h12
-rw-r--r--fs/cifs/smb2proto.h1
-rw-r--r--fs/cifs/smbfsctl.h2
-rw-r--r--fs/sysfs/file.c22
-rw-r--r--include/acpi/acconfig.h2
-rw-r--r--include/acpi/acpi_bus.h1
-rw-r--r--include/acpi/acpixf.h2
-rw-r--r--include/asm-generic/simd.h14
-rw-r--r--include/crypto/ablk_helper.h (renamed from arch/x86/include/asm/crypto/ablk_helper.h)0
-rw-r--r--include/crypto/algapi.h18
-rw-r--r--include/crypto/authenc.h12
-rw-r--r--include/linux/gpio/driver.h11
-rw-r--r--include/linux/hid-sensor-hub.h3
-rw-r--r--include/linux/padata.h3
-rw-r--r--include/linux/slab.h102
-rw-r--r--include/linux/tegra-powergate.h27
-rw-r--r--include/trace/ftrace.h5
-rw-r--r--kernel/extable.c4
-rw-r--r--kernel/padata.c9
-rw-r--r--kernel/trace/ftrace.c64
-rw-r--r--lib/lockref.c9
-rw-r--r--security/integrity/digsig.c30
-rw-r--r--security/integrity/ima/Kconfig8
-rw-r--r--security/integrity/ima/ima.h6
-rw-r--r--security/integrity/ima/ima_api.c1
-rw-r--r--security/integrity/ima/ima_appraise.c11
-rw-r--r--security/integrity/ima/ima_crypto.c17
-rw-r--r--security/integrity/ima/ima_fs.c14
-rw-r--r--security/integrity/ima/ima_template.c21
-rw-r--r--security/integrity/ima/ima_template_lib.c6
-rw-r--r--security/integrity/integrity.h7
-rw-r--r--tools/power/cpupower/man/cpupower-idle-info.13
-rw-r--r--tools/power/cpupower/man/cpupower-idle-set.171
-rw-r--r--tools/power/cpupower/utils/helpers/sysfs.c4
241 files changed, 4223 insertions, 1511 deletions
diff --git a/Documentation/Changes b/Documentation/Changes
index b17580885273..07c75d18154e 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -196,13 +196,6 @@ chmod 0644 /dev/cpu/microcode
as root before you can use this. You'll probably also want to
get the user-space microcode_ctl utility to use with this.
-Powertweak
-----------
-
-If you are running v0.1.17 or earlier, you should upgrade to
-version v0.99.0 or higher. Running old versions may cause problems
-with programs using shared memory.
-
udev
----
udev is a userspace application for populating /dev dynamically with
@@ -366,10 +359,6 @@ Intel P6 microcode
------------------
o <http://www.urbanmyth.org/microcode/>
-Powertweak
-----------
-o <http://powertweak.sourceforge.net/>
-
udev
----
o <http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html>
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index 6c9d9d37c83a..f5170082bdb3 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -58,7 +58,7 @@
</sect1>
<sect1><title>Wait queues and Wake events</title>
!Iinclude/linux/wait.h
-!Ekernel/wait.c
+!Ekernel/sched/wait.c
</sect1>
<sect1><title>High-resolution timers</title>
!Iinclude/linux/ktime.h
diff --git a/Documentation/devicetree/bindings/i2c/i2c-omap.txt b/Documentation/devicetree/bindings/i2c/i2c-omap.txt
index 56564aa4b444..7e49839d4124 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-omap.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-omap.txt
@@ -1,7 +1,8 @@
I2C for OMAP platforms
Required properties :
-- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c"
+- compatible : Must be "ti,omap2420-i2c", "ti,omap2430-i2c", "ti,omap3-i2c"
+ or "ti,omap4-i2c"
- ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
- #address-cells = <1>;
- #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/rng/qcom,prng.txt b/Documentation/devicetree/bindings/rng/qcom,prng.txt
new file mode 100644
index 000000000000..8e5853c2879b
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/qcom,prng.txt
@@ -0,0 +1,17 @@
+Qualcomm MSM pseudo random number generator.
+
+Required properties:
+
+- compatible : should be "qcom,prng"
+- reg : specifies base physical address and size of the registers map
+- clocks : phandle to clock-controller plus clock-specifier pair
+- clock-names : "core" clocks all registers, FIFO and circuits in PRNG IP block
+
+Example:
+
+ rng@f9bff000 {
+ compatible = "qcom,prng";
+ reg = <0xf9bff000 0x200>;
+ clocks = <&clock GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ };
diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt
new file mode 100644
index 000000000000..0d03506f2cc5
--- /dev/null
+++ b/Documentation/gpio/board.txt
@@ -0,0 +1,115 @@
+GPIO Mappings
+=============
+
+This document explains how GPIOs can be assigned to given devices and functions.
+Note that it only applies to the new descriptor-based interface. For a
+description of the deprecated integer-based GPIO interface please refer to
+gpio-legacy.txt (actually, there is no real mapping possible with the old
+interface; you just fetch an integer from somewhere and request the
+corresponding GPIO.
+
+Platforms that make use of GPIOs must select ARCH_REQUIRE_GPIOLIB (if GPIO usage
+is mandatory) or ARCH_WANT_OPTIONAL_GPIOLIB (if GPIO support can be omitted) in
+their Kconfig. Then, how GPIOs are mapped depends on what the platform uses to
+describe its hardware layout. Currently, mappings can be defined through device
+tree, ACPI, and platform data.
+
+Device Tree
+-----------
+GPIOs can easily be mapped to devices and functions in the device tree. The
+exact way to do it depends on the GPIO controller providing the GPIOs, see the
+device tree bindings for your controller.
+
+GPIOs mappings are defined in the consumer device's node, in a property named
+<function>-gpios, where <function> is the function the driver will request
+through gpiod_get(). For example:
+
+ foo_device {
+ compatible = "acme,foo";
+ ...
+ led-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>, /* red */
+ <&gpio 16 GPIO_ACTIVE_HIGH>, /* green */
+ <&gpio 17 GPIO_ACTIVE_HIGH>; /* blue */
+
+ power-gpio = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+This property will make GPIOs 15, 16 and 17 available to the driver under the
+"led" function, and GPIO 1 as the "power" GPIO:
+
+ struct gpio_desc *red, *green, *blue, *power;
+
+ red = gpiod_get_index(dev, "led", 0);
+ green = gpiod_get_index(dev, "led", 1);
+ blue = gpiod_get_index(dev, "led", 2);
+
+ power = gpiod_get(dev, "power");
+
+The led GPIOs will be active-high, while the power GPIO will be active-low (i.e.
+gpiod_is_active_low(power) will be true).
+
+ACPI
+----
+ACPI does not support function names for GPIOs. Therefore, only the "idx"
+argument of gpiod_get_index() is useful to discriminate between GPIOs assigned
+to a device. The "con_id" argument can still be set for debugging purposes (it
+will appear under error messages as well as debug and sysfs nodes).
+
+Platform Data
+-------------
+Finally, GPIOs can be bound to devices and functions using platform data. Board
+files that desire to do so need to include the following header:
+
+ #include <linux/gpio/driver.h>
+
+GPIOs are mapped by the means of tables of lookups, containing instances of the
+gpiod_lookup structure. Two macros are defined to help declaring such mappings:
+
+ GPIO_LOOKUP(chip_label, chip_hwnum, dev_id, con_id, flags)
+ GPIO_LOOKUP_IDX(chip_label, chip_hwnum, dev_id, con_id, idx, flags)
+
+where
+
+ - chip_label is the label of the gpiod_chip instance providing the GPIO
+ - chip_hwnum is the hardware number of the GPIO within the chip
+ - dev_id is the identifier of the device that will make use of this GPIO. If
+ NULL, the GPIO will be available to all devices.
+ - con_id is the name of the GPIO function from the device point of view. It
+ can be NULL.
+ - idx is the index of the GPIO within the function.
+ - flags is defined to specify the following properties:
+ * GPIOF_ACTIVE_LOW - to configure the GPIO as active-low
+ * GPIOF_OPEN_DRAIN - GPIO pin is open drain type.
+ * GPIOF_OPEN_SOURCE - GPIO pin is open source type.
+
+In the future, these flags might be extended to support more properties.
+
+Note that GPIO_LOOKUP() is just a shortcut to GPIO_LOOKUP_IDX() where idx = 0.
+
+A lookup table can then be defined as follows:
+
+ struct gpiod_lookup gpios_table[] = {
+ GPIO_LOOKUP_IDX("gpio.0", 15, "foo.0", "led", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("gpio.0", 16, "foo.0", "led", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("gpio.0", 17, "foo.0", "led", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio.0", 1, "foo.0", "power", GPIO_ACTIVE_LOW),
+ };
+
+And the table can be added by the board code as follows:
+
+ gpiod_add_table(gpios_table, ARRAY_SIZE(gpios_table));
+
+The driver controlling "foo.0" will then be able to obtain its GPIOs as follows:
+
+ struct gpio_desc *red, *green, *blue, *power;
+
+ red = gpiod_get_index(dev, "led", 0);
+ green = gpiod_get_index(dev, "led", 1);
+ blue = gpiod_get_index(dev, "led", 2);
+
+ power = gpiod_get(dev, "power");
+ gpiod_direction_output(power, 1);
+
+Since the "power" GPIO is mapped as active-low, its actual signal will be 0
+after this code. Contrary to the legacy integer GPIO interface, the active-low
+property is handled during mapping and is thus transparent to GPIO consumers.
diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt
new file mode 100644
index 000000000000..07c74a3765a0
--- /dev/null
+++ b/Documentation/gpio/consumer.txt
@@ -0,0 +1,197 @@
+GPIO Descriptor Consumer Interface
+==================================
+
+This document describes the consumer interface of the GPIO framework. Note that
+it describes the new descriptor-based interface. For a description of the
+deprecated integer-based GPIO interface please refer to gpio-legacy.txt.
+
+
+Guidelines for GPIOs consumers
+==============================
+
+Drivers that can't work without standard GPIO calls should have Kconfig entries
+that depend on GPIOLIB. The functions that allow a driver to obtain and use
+GPIOs are available by including the following file:
+
+ #include <linux/gpio/consumer.h>
+
+All the functions that work with the descriptor-based GPIO interface are
+prefixed with gpiod_. The gpio_ prefix is used for the legacy interface. No
+other function in the kernel should use these prefixes.
+
+
+Obtaining and Disposing GPIOs
+=============================
+
+With the descriptor-based interface, GPIOs are identified with an opaque,
+non-forgeable handler that must be obtained through a call to one of the
+gpiod_get() functions. Like many other kernel subsystems, gpiod_get() takes the
+device that will use the GPIO and the function the requested GPIO is supposed to
+fulfill:
+
+ struct gpio_desc *gpiod_get(struct device *dev, const char *con_id)
+
+If a function is implemented by using several GPIOs together (e.g. a simple LED
+device that displays digits), an additional index argument can be specified:
+
+ struct gpio_desc *gpiod_get_index(struct device *dev,
+ const char *con_id, unsigned int idx)
+
+Both functions return either a valid GPIO descriptor, or an error code checkable
+with IS_ERR(). They will never return a NULL pointer.
+
+Device-managed variants of these functions are also defined:
+
+ struct gpio_desc *devm_gpiod_get(struct device *dev, const char *con_id)
+
+ struct gpio_desc *devm_gpiod_get_index(struct device *dev,
+ const char *con_id,
+ unsigned int idx)
+
+A GPIO descriptor can be disposed of using the gpiod_put() function:
+
+ void gpiod_put(struct gpio_desc *desc)
+
+It is strictly forbidden to use a descriptor after calling this function. The
+device-managed variant is, unsurprisingly:
+
+ void devm_gpiod_put(struct device *dev, struct gpio_desc *desc)
+
+
+Using GPIOs
+===========
+
+Setting Direction
+-----------------
+The first thing a driver must do with a GPIO is setting its direction. This is
+done by invoking one of the gpiod_direction_*() functions:
+
+ int gpiod_direction_input(struct gpio_desc *desc)
+ int gpiod_direction_output(struct gpio_desc *desc, int value)
+
+The return value is zero for success, else a negative errno. It should be
+checked, since the get/set calls don't return errors and since misconfiguration
+is possible. You should normally issue these calls from a task context. However,
+for spinlock-safe GPIOs it is OK to use them before tasking is enabled, as part
+of early board setup.
+
+For output GPIOs, the value provided becomes the initial output value. This
+helps avoid signal glitching during system startup.
+
+A driver can also query the current direction of a GPIO:
+
+ int gpiod_get_direction(const struct gpio_desc *desc)
+
+This function will return either GPIOF_DIR_IN or GPIOF_DIR_OUT.
+
+Be aware that there is no default direction for GPIOs. Therefore, **using a GPIO
+without setting its direction first is illegal and will result in undefined
+behavior!**
+
+
+Spinlock-Safe GPIO Access
+-------------------------
+Most GPIO controllers can be accessed with memory read/write instructions. Those
+don't need to sleep, and can safely be done from inside hard (non-threaded) IRQ
+handlers and similar contexts.
+
+Use the following calls to access GPIOs from an atomic context:
+
+ int gpiod_get_value(const struct gpio_desc *desc);
+ void gpiod_set_value(struct gpio_desc *desc, int value);
+
+The values are boolean, zero for low, nonzero for high. When reading the value
+of an output pin, the value returned should be what's seen on the pin. That
+won't always match the specified output value, because of issues including
+open-drain signaling and output latencies.
+
+The get/set calls do not return errors because "invalid GPIO" should have been
+reported earlier from gpiod_direction_*(). However, note that not all platforms
+can read the value of output pins; those that can't should always return zero.
+Also, using these calls for GPIOs that can't safely be accessed without sleeping
+(see below) is an error.
+
+
+GPIO Access That May Sleep
+--------------------------
+Some GPIO controllers must be accessed using message based buses like I2C or
+SPI. Commands to read or write those GPIO values require waiting to get to the
+head of a queue to transmit a command and get its response. This requires
+sleeping, which can't be done from inside IRQ handlers.
+
+Platforms that support this type of GPIO distinguish them from other GPIOs by
+returning nonzero from this call:
+
+ int gpiod_cansleep(const struct gpio_desc *desc)
+
+To access such GPIOs, a different set of accessors is defined:
+
+ int gpiod_get_value_cansleep(const struct gpio_desc *desc)
+ void gpiod_set_value_cansleep(struct gpio_desc *desc, int value)
+
+Accessing such GPIOs requires a context which may sleep, for example a threaded
+IRQ handler, and those accessors must be used instead of spinlock-safe
+accessors without the cansleep() name suffix.
+
+Other than the fact that these accessors might sleep, and will work on GPIOs
+that can't be accessed from hardIRQ handlers, these calls act the same as the
+spinlock-safe calls.
+
+
+Active-low State and Raw GPIO Values
+------------------------------------
+Device drivers like to manage the logical state of a GPIO, i.e. the value their
+device will actually receive, no matter what lies between it and the GPIO line.
+In some cases, it might make sense to control the actual GPIO line value. The
+following set of calls ignore the active-low property of a GPIO and work on the
+raw line value:
+
+ int gpiod_get_raw_value(const struct gpio_desc *desc)
+ void gpiod_set_raw_value(struct gpio_desc *desc, int value)
+ int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc)
+ void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value)
+
+The active-low state of a GPIO can also be queried using the following call:
+
+ int gpiod_is_active_low(const struct gpio_desc *desc)
+
+Note that these functions should only be used with great moderation ; a driver
+should not have to care about the physical line level.
+
+GPIOs mapped to IRQs
+--------------------
+GPIO lines can quite often be used as IRQs. You can get the IRQ number
+corresponding to a given GPIO using the following call:
+
+ int gpiod_to_irq(const struct gpio_desc *desc)
+
+It will return an IRQ number, or an negative errno code if the mapping can't be
+done (most likely because that particular GPIO cannot be used as IRQ). It is an
+unchecked error to use a GPIO that wasn't set up as an input using
+gpiod_direction_input(), or to use an IRQ number that didn't originally come
+from gpiod_to_irq(). gpiod_to_irq() is not allowed to sleep.
+
+Non-error values returned from gpiod_to_irq() can be passed to request_irq() or
+free_irq(). They will often be stored into IRQ resources for platform devices,
+by the board-specific initialization code. Note that IRQ trigger options are
+part of the IRQ interface, e.g. IRQF_TRIGGER_FALLING, as are system wakeup
+capabilities.
+
+
+Interacting With the Legacy GPIO Subsystem
+==========================================
+Many kernel subsystems still handle GPIOs using the legacy integer-based
+interface. Although it is strongly encouraged to upgrade them to the safer
+descriptor-based API, the following two functions allow you to convert a GPIO
+descriptor into the GPIO integer namespace and vice-versa:
+
+ int desc_to_gpio(const struct gpio_desc *desc)
+ struct gpio_desc *gpio_to_desc(unsigned gpio)
+
+The GPIO number returned by desc_to_gpio() can be safely used as long as the
+GPIO descriptor has not been freed. All the same, a GPIO number passed to
+gpio_to_desc() must have been properly acquired, and usage of the returned GPIO
+descriptor is only possible after the GPIO number has been released.
+
+Freeing a GPIO obtained by one API with the other API is forbidden and an
+unchecked error.
diff --git a/Documentation/gpio/driver.txt b/Documentation/gpio/driver.txt
new file mode 100644
index 000000000000..9da0bfa74781
--- /dev/null
+++ b/Documentation/gpio/driver.txt
@@ -0,0 +1,75 @@
+GPIO Descriptor Driver Interface
+================================
+
+This document serves as a guide for GPIO chip drivers writers. Note that it
+describes the new descriptor-based interface. For a description of the
+deprecated integer-based GPIO interface please refer to gpio-legacy.txt.
+
+Each GPIO controller driver needs to include the following header, which defines
+the structures used to define a GPIO driver:
+
+ #include <linux/gpio/driver.h>
+
+
+Internal Representation of GPIOs
+================================
+
+Inside a GPIO driver, individual GPIOs are identified by their hardware number,
+which is a unique number between 0 and n, n being the number of GPIOs managed by
+the chip. This number is purely internal: the hardware number of a particular
+GPIO descriptor is never made visible outside of the driver.
+
+On top of this internal number, each GPIO also need to have a global number in
+the integer GPIO namespace so that it can be used with the legacy GPIO
+interface. Each chip must thus have a "base" number (which can be automatically
+assigned), and for each GPIO the global number will be (base + hardware number).
+Although the integer representation is considered deprecated, it still has many
+users and thus needs to be maintained.
+
+So for example one platform could use numbers 32-159 for GPIOs, with a
+controller defining 128 GPIOs at a "base" of 32 ; while another platform uses
+numbers 0..63 with one set of GPIO controllers, 64-79 with another type of GPIO
+controller, and on one particular board 80-95 with an FPGA. The numbers need not
+be contiguous; either of those platforms could also use numbers 2000-2063 to
+identify GPIOs in a bank of I2C GPIO expanders.
+
+
+Controller Drivers: gpio_chip
+=============================
+
+In the gpiolib framework each GPIO controller is packaged as a "struct
+gpio_chip" (see linux/gpio/driver.h for its complete definition) with members
+common to each controller of that type:
+
+ - methods to establish GPIO direction
+ - methods used to access GPIO values
+ - method to return the IRQ number associated to a given GPIO
+ - flag saying whether calls to its methods may sleep
+ - optional debugfs dump method (showing extra state like pullup config)
+ - optional base number (will be automatically assigned if omitted)
+ - label for diagnostics and GPIOs mapping using platform data
+
+The code implementing a gpio_chip should support multiple instances of the
+controller, possibly using the driver model. That code will configure each
+gpio_chip and issue gpiochip_add(). Removing a GPIO controller should be rare;
+use gpiochip_remove() when it is unavoidable.
+
+Most often a gpio_chip is part of an instance-specific structure with state not
+exposed by the GPIO interfaces, such as addressing, power management, and more.
+Chips such as codecs will have complex non-GPIO state.
+
+Any debugfs dump method should normally ignore signals which haven't been
+requested as GPIOs. They can use gpiochip_is_requested(), which returns either
+NULL or the label associated with that GPIO when it was requested.
+
+Locking IRQ usage
+-----------------
+Input GPIOs can be used as IRQ signals. When this happens, a driver is requested
+to mark the GPIO as being used as an IRQ:
+
+ int gpiod_lock_as_irq(struct gpio_desc *desc)
+
+This will prevent the use of non-irq related GPIO APIs until the GPIO IRQ lock
+is released:
+
+ void gpiod_unlock_as_irq(struct gpio_desc *desc)
diff --git a/Documentation/gpio.txt b/Documentation/gpio/gpio-legacy.txt
index 6f83fa965b4b..6f83fa965b4b 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio/gpio-legacy.txt
diff --git a/Documentation/gpio/gpio.txt b/Documentation/gpio/gpio.txt
new file mode 100644
index 000000000000..cd9b356e88cd
--- /dev/null
+++ b/Documentation/gpio/gpio.txt
@@ -0,0 +1,119 @@
+GPIO Interfaces
+===============
+
+The documents in this directory give detailed instructions on how to access
+GPIOs in drivers, and how to write a driver for a device that provides GPIOs
+itself.
+
+Due to the history of GPIO interfaces in the kernel, there are two different
+ways to obtain and use GPIOs:
+
+ - The descriptor-based interface is the preferred way to manipulate GPIOs,
+and is described by all the files in this directory excepted gpio-legacy.txt.
+ - The legacy integer-based interface which is considered deprecated (but still
+usable for compatibility reasons) is documented in gpio-legacy.txt.
+
+The remainder of this document applies to the new descriptor-based interface.
+gpio-legacy.txt contains the same information applied to the legacy
+integer-based interface.
+
+
+What is a GPIO?
+===============
+
+A "General Purpose Input/Output" (GPIO) is a flexible software-controlled
+digital signal. They are provided from many kinds of chip, and are familiar
+to Linux developers working with embedded and custom hardware. Each GPIO
+represents a bit connected to a particular pin, or "ball" on Ball Grid Array
+(BGA) packages. Board schematics show which external hardware connects to
+which GPIOs. Drivers can be written generically, so that board setup code
+passes such pin configuration data to drivers.
+
+System-on-Chip (SOC) processors heavily rely on GPIOs. In some cases, every
+non-dedicated pin can be configured as a GPIO; and most chips have at least
+several dozen of them. Programmable logic devices (like FPGAs) can easily
+provide GPIOs; multifunction chips like power managers, and audio codecs
+often have a few such pins to help with pin scarcity on SOCs; and there are
+also "GPIO Expander" chips that connect using the I2C or SPI serial buses.
+Most PC southbridges have a few dozen GPIO-capable pins (with only the BIOS
+firmware knowing how they're used).
+
+The exact capabilities of GPIOs vary between systems. Common options:
+
+ - Output values are writable (high=1, low=0). Some chips also have
+ options about how that value is driven, so that for example only one
+ value might be driven, supporting "wire-OR" and similar schemes for the
+ other value (notably, "open drain" signaling).
+
+ - Input values are likewise readable (1, 0). Some chips support readback
+ of pins configured as "output", which is very useful in such "wire-OR"
+ cases (to support bidirectional signaling). GPIO controllers may have
+ input de-glitch/debounce logic, sometimes with software controls.
+
+ - Inputs can often be used as IRQ signals, often edge triggered but
+ sometimes level triggered. Such IRQs may be configurable as system
+ wakeup events, to wake the system from a low power state.
+
+ - Usually a GPIO will be configurable as either input or output, as needed
+ by different product boards; single direction ones exist too.
+
+ - Most GPIOs can be accessed while holding spinlocks, but those accessed
+ through a serial bus normally can't. Some systems support both types.
+
+On a given board each GPIO is used for one specific purpose like monitoring
+MMC/SD card insertion/removal, detecting card write-protect status, driving
+a LED, configuring a transceiver, bit-banging a serial bus, poking a hardware
+watchdog, sensing a switch, and so on.
+
+
+Common GPIO Properties
+======================
+
+These properties are met through all the other documents of the GPIO interface
+and it is useful to understand them, especially if you need to define GPIO
+mappings.
+
+Active-High and Active-Low
+--------------------------
+It is natural to assume that a GPIO is "active" when its output signal is 1
+("high"), and inactive when it is 0 ("low"). However in practice the signal of a
+GPIO may be inverted before is reaches its destination, or a device could decide
+to have different conventions about what "active" means. Such decisions should
+be transparent to device drivers, therefore it is possible to define a GPIO as
+being either active-high ("1" means "active", the default) or active-low ("0"
+means "active") so that drivers only need to worry about the logical signal and
+not about what happens at the line level.
+
+Open Drain and Open Source
+--------------------------
+Sometimes shared signals need to use "open drain" (where only the low signal
+level is actually driven), or "open source" (where only the high signal level is
+driven) signaling. That term applies to CMOS transistors; "open collector" is
+used for TTL. A pullup or pulldown resistor causes the high or low signal level.
+This is sometimes called a "wire-AND"; or more practically, from the negative
+logic (low=true) perspective this is a "wire-OR".
+
+One common example of an open drain signal is a shared active-low IRQ line.
+Also, bidirectional data bus signals sometimes use open drain signals.
+
+Some GPIO controllers directly support open drain and open source outputs; many
+don't. When you need open drain signaling but your hardware doesn't directly
+support it, there's a common idiom you can use to emulate it with any GPIO pin
+that can be used as either an input or an output:
+
+ LOW: gpiod_direction_output(gpio, 0) ... this drives the signal and overrides
+ the pullup.
+
+ HIGH: gpiod_direction_input(gpio) ... this turns off the output, so the pullup
+ (or some other device) controls the signal.
+
+The same logic can be applied to emulate open source signaling, by driving the
+high signal and configuring the GPIO as input for low. This open drain/open
+source emulation can be handled transparently by the GPIO framework.
+
+If you are "driving" the signal high but gpiod_get_value(gpio) reports a low
+value (after the appropriate rise time passes), you know some other component is
+driving the shared signal low. That's not necessarily an error. As one common
+example, that's how I2C clocks are stretched: a slave that needs a slower clock
+delays the rising edge of SCK, and the I2C master adjusts its signaling rate
+accordingly.
diff --git a/Documentation/gpio/sysfs.txt b/Documentation/gpio/sysfs.txt
new file mode 100644
index 000000000000..c2c3a97f8ff7
--- /dev/null
+++ b/Documentation/gpio/sysfs.txt
@@ -0,0 +1,155 @@
+GPIO Sysfs Interface for Userspace
+==================================
+
+Platforms which use the "gpiolib" implementors framework may choose to
+configure a sysfs user interface to GPIOs. This is different from the
+debugfs interface, since it provides control over GPIO direction and
+value instead of just showing a gpio state summary. Plus, it could be
+present on production systems without debugging support.
+
+Given appropriate hardware documentation for the system, userspace could
+know for example that GPIO #23 controls the write protect line used to
+protect boot loader segments in flash memory. System upgrade procedures
+may need to temporarily remove that protection, first importing a GPIO,
+then changing its output state, then updating the code before re-enabling
+the write protection. In normal use, GPIO #23 would never be touched,
+and the kernel would have no need to know about it.
+
+Again depending on appropriate hardware documentation, on some systems
+userspace GPIO can be used to determine system configuration data that
+standard kernels won't know about. And for some tasks, simple userspace
+GPIO drivers could be all that the system really needs.
+
+Note that standard kernel drivers exist for common "LEDs and Buttons"
+GPIO tasks: "leds-gpio" and "gpio_keys", respectively. Use those
+instead of talking directly to the GPIOs; they integrate with kernel
+frameworks better than your userspace code could.
+
+
+Paths in Sysfs
+--------------
+There are three kinds of entry in /sys/class/gpio:
+
+ - Control interfaces used to get userspace control over GPIOs;
+
+ - GPIOs themselves; and
+
+ - GPIO controllers ("gpio_chip" instances).
+
+That's in addition to standard files including the "device" symlink.
+
+The control interfaces are write-only:
+
+ /sys/class/gpio/
+
+ "export" ... Userspace may ask the kernel to export control of
+ a GPIO to userspace by writing its number to this file.
+
+ Example: "echo 19 > export" will create a "gpio19" node
+ for GPIO #19, if that's not requested by kernel code.
+
+ "unexport" ... Reverses the effect of exporting to userspace.
+
+ Example: "echo 19 > unexport" will remove a "gpio19"
+ node exported using the "export" file.
+
+GPIO signals have paths like /sys/class/gpio/gpio42/ (for GPIO #42)
+and have the following read/write attributes:
+
+ /sys/class/gpio/gpioN/
+
+ "direction" ... reads as either "in" or "out". This value may
+ normally be written. Writing as "out" defaults to
+ initializing the value as low. To ensure glitch free
+ operation, values "low" and "high" may be written to
+ configure the GPIO as an output with that initial value.
+
+ Note that this attribute *will not exist* if the kernel
+ doesn't support changing the direction of a GPIO, or
+ it was exported by kernel code that didn't explicitly
+ allow userspace to reconfigure this GPIO's direction.
+
+ "value" ... reads as either 0 (low) or 1 (high). If the GPIO
+ is configured as an output, this value may be written;
+ any nonzero value is treated as high.
+
+ If the pin can be configured as interrupt-generating interrupt
+ and if it has been configured to generate interrupts (see the
+ description of "edge"), you can poll(2) on that file and
+ poll(2) will return whenever the interrupt was triggered. If
+ you use poll(2), set the events POLLPRI and POLLERR. If you
+ use select(2), set the file descriptor in exceptfds. After
+ poll(2) returns, either lseek(2) to the beginning of the sysfs
+ file and read the new value or close the file and re-open it
+ to read the value.
+
+ "edge" ... reads as either "none", "rising", "falling", or
+ "both". Write these strings to select the signal edge(s)
+ that will make poll(2) on the "value" file return.
+
+ This file exists only if the pin can be configured as an
+ interrupt generating input pin.
+
+ "active_low" ... reads as either 0 (false) or 1 (true). Write
+ any nonzero value to invert the value attribute both
+ for reading and writing. Existing and subsequent
+ poll(2) support configuration via the edge attribute
+ for "rising" and "falling" edges will follow this
+ setting.
+
+GPIO controllers have paths like /sys/class/gpio/gpiochip42/ (for the
+controller implementing GPIOs starting at #42) and have the following
+read-only attributes:
+
+ /sys/class/gpio/gpiochipN/
+
+ "base" ... same as N, the first GPIO managed by this chip
+
+ "label" ... provided for diagnostics (not always unique)
+
+ "ngpio" ... how many GPIOs this manges (N to N + ngpio - 1)
+
+Board documentation should in most cases cover what GPIOs are used for
+what purposes. However, those numbers are not always stable; GPIOs on
+a daughtercard might be different depending on the base board being used,
+or other cards in the stack. In such cases, you may need to use the
+gpiochip nodes (possibly in conjunction with schematics) to determine
+the correct GPIO number to use for a given signal.
+
+
+Exporting from Kernel code
+--------------------------
+Kernel code can explicitly manage exports of GPIOs which have already been
+requested using gpio_request():
+
+ /* export the GPIO to userspace */
+ int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
+
+ /* reverse gpio_export() */
+ void gpiod_unexport(struct gpio_desc *desc);
+
+ /* create a sysfs link to an exported GPIO node */
+ int gpiod_export_link(struct device *dev, const char *name,
+ struct gpio_desc *desc);
+
+ /* change the polarity of a GPIO node in sysfs */
+ int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value);
+
+After a kernel driver requests a GPIO, it may only be made available in
+the sysfs interface by gpiod_export(). The driver can control whether the
+signal direction may change. This helps drivers prevent userspace code
+from accidentally clobbering important system state.
+
+This explicit exporting can help with debugging (by making some kinds
+of experiments easier), or can provide an always-there interface that's
+suitable for documenting as part of a board support package.
+
+After the GPIO has been exported, gpiod_export_link() allows creating
+symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can
+use this to provide the interface under their own device in sysfs with
+a descriptive name.
+
+Drivers can use gpiod_sysfs_set_active_low() to hide GPIO line polarity
+differences between boards from user space. Polarity change can be done both
+before and after gpiod_export(), and previously enabled poll(2) support for
+either rising or falling edge will be reconfigured to follow this setting.
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 1e12aeff403b..aa537ed13f0a 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -85,6 +85,8 @@
reg = <0x7e205000 0x1000>;
interrupts = <2 21>;
clocks = <&clk_i2c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -93,6 +95,8 @@
reg = <0x7e804000 0x1000>;
interrupts = <2 21>;
clocks = <&clk_i2c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi
index dc259e8b8a73..9b186ac06c8b 100644
--- a/arch/arm/boot/dts/cros5250-common.dtsi
+++ b/arch/arm/boot/dts/cros5250-common.dtsi
@@ -27,6 +27,13 @@
i2c2_bus: i2c2-bus {
samsung,pin-pud = <0>;
};
+
+ max77686_irq: max77686-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
};
i2c@12C60000 {
@@ -35,6 +42,11 @@
max77686@09 {
compatible = "maxim,max77686";
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77686_irq>;
+ wakeup-source;
reg = <0x09>;
voltage-regulators {
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 59154dc15fe4..fb28b2ecb1db 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -161,7 +161,7 @@
clocks = <&clks 197>, <&clks 3>,
<&clks 197>, <&clks 107>,
<&clks 0>, <&clks 118>,
- <&clks 62>, <&clks 139>,
+ <&clks 0>, <&clks 139>,
<&clks 0>;
clock-names = "core", "rxtx0",
"rxtx1", "rxtx2",
diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi
index b0ee342598f0..68221fab978d 100644
--- a/arch/arm/boot/dts/omap-zoom-common.dtsi
+++ b/arch/arm/boot/dts/omap-zoom-common.dtsi
@@ -13,7 +13,7 @@
* they probably share the same GPIO IRQ
* REVISIT: Add timing support from slls644g.pdf
*/
- 8250@3,0 {
+ uart@3,0 {
compatible = "ns16550a";
reg = <3 0 0x100>;
bank-width = <2>;
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index a2bfcde858a6..d0c5b37e248c 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -9,6 +9,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/omap.h>
#include "skeleton.dtsi"
@@ -21,6 +22,8 @@
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
};
cpus {
@@ -53,6 +56,28 @@
ranges;
ti,hwmods = "l3_main";
+ aes: aes@480a6000 {
+ compatible = "ti,omap2-aes";
+ ti,hwmods = "aes";
+ reg = <0x480a6000 0x50>;
+ dmas = <&sdma 9 &sdma 10>;
+ dma-names = "tx", "rx";
+ };
+
+ hdq1w: 1w@480b2000 {
+ compatible = "ti,omap2420-1w";
+ ti,hwmods = "hdq1w";
+ reg = <0x480b2000 0x1000>;
+ interrupts = <58>;
+ };
+
+ mailbox: mailbox@48094000 {
+ compatible = "ti,omap2-mailbox";
+ ti,hwmods = "mailbox";
+ reg = <0x48094000 0x200>;
+ interrupts = <26>;
+ };
+
intc: interrupt-controller@1 {
compatible = "ti,omap2-intc";
interrupt-controller;
@@ -63,6 +88,7 @@
sdma: dma-controller@48056000 {
compatible = "ti,omap2430-sdma", "ti,omap2420-sdma";
+ ti,hwmods = "dma";
reg = <0x48056000 0x1000>;
interrupts = <12>,
<13>,
@@ -73,21 +99,91 @@
#dma-requests = <64>;
};
+ i2c1: i2c@48070000 {
+ compatible = "ti,omap2-i2c";
+ ti,hwmods = "i2c1";
+ reg = <0x48070000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <56>;
+ dmas = <&sdma 27 &sdma 28>;
+ dma-names = "tx", "rx";
+ };
+
+ i2c2: i2c@48072000 {
+ compatible = "ti,omap2-i2c";
+ ti,hwmods = "i2c2";
+ reg = <0x48072000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <57>;
+ dmas = <&sdma 29 &sdma 30>;
+ dma-names = "tx", "rx";
+ };
+
+ mcspi1: mcspi@48098000 {
+ compatible = "ti,omap2-mcspi";
+ ti,hwmods = "mcspi1";
+ reg = <0x48098000 0x100>;
+ interrupts = <65>;
+ dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38
+ &sdma 39 &sdma 40 &sdma 41 &sdma 42>;
+ dma-names = "tx0", "rx0", "tx1", "rx1",
+ "tx2", "rx2", "tx3", "rx3";
+ };
+
+ mcspi2: mcspi@4809a000 {
+ compatible = "ti,omap2-mcspi";
+ ti,hwmods = "mcspi2";
+ reg = <0x4809a000 0x100>;
+ interrupts = <66>;
+ dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ };
+
+ rng: rng@480a0000 {
+ compatible = "ti,omap2-rng";
+ ti,hwmods = "rng";
+ reg = <0x480a0000 0x50>;
+ interrupts = <36>;
+ };
+
+ sham: sham@480a4000 {
+ compatible = "ti,omap2-sham";
+ ti,hwmods = "sham";
+ reg = <0x480a4000 0x64>;
+ interrupts = <51>;
+ dmas = <&sdma 13>;
+ dma-names = "rx";
+ };
+
uart1: serial@4806a000 {
compatible = "ti,omap2-uart";
ti,hwmods = "uart1";
+ reg = <0x4806a000 0x2000>;
+ interrupts = <72>;
+ dmas = <&sdma 49 &sdma 50>;
+ dma-names = "tx", "rx";
clock-frequency = <48000000>;
};
uart2: serial@4806c000 {
compatible = "ti,omap2-uart";
ti,hwmods = "uart2";
+ reg = <0x4806c000 0x400>;
+ interrupts = <73>;
+ dmas = <&sdma 51 &sdma 52>;
+ dma-names = "tx", "rx";
clock-frequency = <48000000>;
};
uart3: serial@4806e000 {
compatible = "ti,omap2-uart";
ti,hwmods = "uart3";
+ reg = <0x4806e000 0x400>;
+ interrupts = <74>;
+ dmas = <&sdma 53 &sdma 54>;
+ dma-names = "tx", "rx";
clock-frequency = <48000000>;
};
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index c8f9c55169ea..60c605de22dd 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -114,6 +114,15 @@
dma-names = "tx", "rx";
};
+ msdi1: mmc@4809c000 {
+ compatible = "ti,omap2420-mmc";
+ ti,hwmods = "msdi1";
+ reg = <0x4809c000 0x80>;
+ interrupts = <83>;
+ dmas = <&sdma 61 &sdma 62>;
+ dma-names = "tx", "rx";
+ };
+
timer1: timer@48028000 {
compatible = "ti,omap2420-timer";
reg = <0x48028000 0x400>;
@@ -121,5 +130,19 @@
ti,hwmods = "timer1";
ti,timer-alwon;
};
+
+ wd_timer2: wdt@48022000 {
+ compatible = "ti,omap2-wdt";
+ ti,hwmods = "wd_timer2";
+ reg = <0x48022000 0x80>;
+ };
};
};
+
+&i2c1 {
+ compatible = "ti,omap2420-i2c";
+};
+
+&i2c2 {
+ compatible = "ti,omap2420-i2c";
+};
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index c535a5a2b27f..d624345666f5 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -175,6 +175,25 @@
dma-names = "tx", "rx";
};
+ mmc1: mmc@4809c000 {
+ compatible = "ti,omap2-hsmmc";
+ reg = <0x4809c000 0x200>;
+ interrupts = <83>;
+ ti,hwmods = "mmc1";
+ ti,dual-volt;
+ dmas = <&sdma 61>, <&sdma 62>;
+ dma-names = "tx", "rx";
+ };
+
+ mmc2: mmc@480b4000 {
+ compatible = "ti,omap2-hsmmc";
+ reg = <0x480b4000 0x200>;
+ interrupts = <86>;
+ ti,hwmods = "mmc2";
+ dmas = <&sdma 47>, <&sdma 48>;
+ dma-names = "tx", "rx";
+ };
+
timer1: timer@49018000 {
compatible = "ti,omap2420-timer";
reg = <0x49018000 0x400>;
@@ -182,5 +201,35 @@
ti,hwmods = "timer1";
ti,timer-alwon;
};
+
+ mcspi3: mcspi@480b8000 {
+ compatible = "ti,omap2-mcspi";
+ ti,hwmods = "mcspi3";
+ reg = <0x480b8000 0x100>;
+ interrupts = <91>;
+ dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ };
+
+ usb_otg_hs: usb_otg_hs@480ac000 {
+ compatible = "ti,omap2-musb";
+ ti,hwmods = "usb_otg_hs";
+ reg = <0x480ac000 0x1000>;
+ interrupts = <93>;
+ };
+
+ wd_timer2: wdt@49016000 {
+ compatible = "ti,omap2-wdt";
+ ti,hwmods = "wd_timer2";
+ reg = <0x49016000 0x80>;
+ };
};
};
+
+&i2c1 {
+ compatible = "ti,omap2430-i2c";
+};
+
+&i2c2 {
+ compatible = "ti,omap2430-i2c";
+};
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 1f25f3e99c05..adcef406ff0a 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -19,11 +19,11 @@ secure-common = omap-smc.o omap-secure.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
-obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common)
obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
-obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_OMAP5) += $(hwmod-common) $(secure-common)
obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common)
-obj-$(CONFIG_SOC_DRA7XX) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_DRA7XX) += $(hwmod-common) $(secure-common)
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
obj-y += mcbsp.o
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index f7644febee81..e30ef6797c63 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -299,7 +299,6 @@ struct omap_sdrc_params;
extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1);
struct omap2_hsmmc_info;
-extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers);
extern void omap_reserve(void);
struct omap_hwmod;
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index a4e536b11ec9..58347bb874a0 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -32,7 +32,6 @@
#include "soc.h"
#include "iomap.h"
-#include "mux.h"
#include "control.h"
#include "display.h"
#include "prm.h"
@@ -102,90 +101,13 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = {
{ "dss_hdmi", "omapdss_hdmi", -1 },
};
-static void __init omap4_tpd12s015_mux_pads(void)
-{
- omap_mux_init_signal("hdmi_cec",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hdmi_ddc_scl",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hdmi_ddc_sda",
- OMAP_PIN_INPUT_PULLUP);
-}
-
-static void __init omap4_hdmi_mux_pads(enum omap_hdmi_flags flags)
-{
- u32 reg;
- u16 control_i2c_1;
-
- /*
- * CONTROL_I2C_1: HDMI_DDC_SDA_PULLUPRESX (bit 28) and
- * HDMI_DDC_SCL_PULLUPRESX (bit 24) are set to disable
- * internal pull up resistor.
- */
- if (flags & OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP) {
- control_i2c_1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1;
- reg = omap4_ctrl_pad_readl(control_i2c_1);
- reg |= (OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK |
- OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK);
- omap4_ctrl_pad_writel(reg, control_i2c_1);
- }
-}
-
-static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
-{
- u32 enable_mask, enable_shift;
- u32 pipd_mask, pipd_shift;
- u32 reg;
-
- if (dsi_id == 0) {
- enable_mask = OMAP4_DSI1_LANEENABLE_MASK;
- enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT;
- pipd_mask = OMAP4_DSI1_PIPD_MASK;
- pipd_shift = OMAP4_DSI1_PIPD_SHIFT;
- } else if (dsi_id == 1) {
- enable_mask = OMAP4_DSI2_LANEENABLE_MASK;
- enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT;
- pipd_mask = OMAP4_DSI2_PIPD_MASK;
- pipd_shift = OMAP4_DSI2_PIPD_SHIFT;
- } else {
- return -ENODEV;
- }
-
- reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
-
- reg &= ~enable_mask;
- reg &= ~pipd_mask;
-
- reg |= (lanes << enable_shift) & enable_mask;
- reg |= (lanes << pipd_shift) & pipd_mask;
-
- omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
-
- return 0;
-}
-
-int __init omap_hdmi_init(enum omap_hdmi_flags flags)
-{
- if (cpu_is_omap44xx()) {
- omap4_hdmi_mux_pads(flags);
- omap4_tpd12s015_mux_pads();
- }
-
- return 0;
-}
-
static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
{
- if (cpu_is_omap44xx())
- return omap4_dsi_mux_pads(dsi_id, lane_mask);
-
return 0;
}
static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
{
- if (cpu_is_omap44xx())
- omap4_dsi_mux_pads(dsi_id, 0);
}
static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput)
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 81de56251955..d24926e6340f 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1502,6 +1502,22 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
}
/*
+ * For some GPMC devices we still need to rely on the bootloader
+ * timings because the devices can be connected via FPGA. So far
+ * the list is smc91x on the omap2 SDP boards, and 8250 on zooms.
+ * REVISIT: Add timing support from slls644g.pdf and from the
+ * lan91c96 manual.
+ */
+ if (of_device_is_compatible(child, "ns16550a") ||
+ of_device_is_compatible(child, "smsc,lan91c94") ||
+ of_device_is_compatible(child, "smsc,lan91c111")) {
+ dev_warn(&pdev->dev,
+ "%s using bootloader timings on CS%d\n",
+ child->name, cs);
+ goto no_timings;
+ }
+
+ /*
* FIXME: gpmc_cs_request() will map the CS to an arbitary
* location in the gpmc address space. When booting with
* device-tree we want the NOR flash to be mapped to the
@@ -1529,6 +1545,7 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
gpmc_read_timings_dt(child, &gpmc_t);
gpmc_cs_set_timings(cs, &gpmc_t);
+no_timings:
if (of_platform_device_create(child, NULL, &pdev->dev))
return 0;
@@ -1541,42 +1558,6 @@ err:
return ret;
}
-/*
- * REVISIT: Add timing support from slls644g.pdf
- */
-static int gpmc_probe_8250(struct platform_device *pdev,
- struct device_node *child)
-{
- struct resource res;
- unsigned long base;
- int ret, cs;
-
- if (of_property_read_u32(child, "reg", &cs) < 0) {
- dev_err(&pdev->dev, "%s has no 'reg' property\n",
- child->full_name);
- return -ENODEV;
- }
-
- if (of_address_to_resource(child, 0, &res) < 0) {
- dev_err(&pdev->dev, "%s has malformed 'reg' property\n",
- child->full_name);
- return -ENODEV;
- }
-
- ret = gpmc_cs_request(cs, resource_size(&res), &base);
- if (ret < 0) {
- dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs);
- return ret;
- }
-
- if (of_platform_device_create(child, NULL, &pdev->dev))
- return 0;
-
- dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name);
-
- return -ENODEV;
-}
-
static int gpmc_probe_dt(struct platform_device *pdev)
{
int ret;
@@ -1618,10 +1599,9 @@ static int gpmc_probe_dt(struct platform_device *pdev)
else if (of_node_cmp(child->name, "onenand") == 0)
ret = gpmc_probe_onenand_child(pdev, child);
else if (of_node_cmp(child->name, "ethernet") == 0 ||
- of_node_cmp(child->name, "nor") == 0)
+ of_node_cmp(child->name, "nor") == 0 ||
+ of_node_cmp(child->name, "uart") == 0)
ret = gpmc_probe_generic_child(pdev, child);
- else if (of_node_cmp(child->name, "8250") == 0)
- ret = gpmc_probe_8250(pdev, child);
if (WARN(ret < 0, "%s: probing gpmc child %s failed\n",
__func__, child->full_name))
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index 8cc7d331437d..3e97c6c8ecf1 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -76,6 +76,13 @@ static inline void omap_barrier_reserve_memblock(void)
{ }
#endif
+#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
void set_cntfreq(void);
+#else
+static inline void set_cntfreq(void)
+{
+}
+#endif
+
#endif /* __ASSEMBLER__ */
#endif /* OMAP_ARCH_OMAP_SECURE_H */
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 57911430324e..b39efd46abf9 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -35,7 +35,6 @@
#include "iomap.h"
#include "common.h"
#include "mmc.h"
-#include "hsmmc.h"
#include "prminst44xx.h"
#include "prcm_mpu44xx.h"
#include "omap4-sar-layout.h"
@@ -284,59 +283,3 @@ skip_errata_init:
omap_wakeupgen_init();
irqchip_init();
}
-
-#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-static int omap4_twl6030_hsmmc_late_init(struct device *dev)
-{
- int irq = 0;
- struct platform_device *pdev = container_of(dev,
- struct platform_device, dev);
- struct omap_mmc_platform_data *pdata = dev->platform_data;
-
- /* Setting MMC1 Card detect Irq */
- if (pdev->id == 0) {
- irq = twl6030_mmc_card_detect_config();
- if (irq < 0) {
- dev_err(dev, "%s: Error card detect config(%d)\n",
- __func__, irq);
- return irq;
- }
- pdata->slots[0].card_detect_irq = irq;
- pdata->slots[0].card_detect = twl6030_mmc_card_detect;
- }
- return 0;
-}
-
-static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
-{
- struct omap_mmc_platform_data *pdata;
-
- /* dev can be null if CONFIG_MMC_OMAP_HS is not set */
- if (!dev) {
- pr_err("Failed %s\n", __func__);
- return;
- }
- pdata = dev->platform_data;
- pdata->init = omap4_twl6030_hsmmc_late_init;
-}
-
-int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
- struct omap2_hsmmc_info *c;
-
- omap_hsmmc_init(controllers);
- for (c = controllers; c->mmc; c++) {
- /* pdev can be null if CONFIG_MMC_OMAP_HS is not set */
- if (!c->pdev)
- continue;
- omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
- }
-
- return 0;
-}
-#else
-int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
- return 0;
-}
-#endif
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 93b80e5da8d4..1f3770a8a728 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -120,7 +120,7 @@ static void omap3_save_secure_ram_context(void)
* will hang the system.
*/
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
- ret = _omap_save_secure_sram((u32 *)
+ ret = _omap_save_secure_sram((u32 *)(unsigned long)
__pa(omap3_secure_ram_storage));
pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
/* Following is for error tracking, it should not happen */
diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h
index 7a976065e138..8d95aa543ef5 100644
--- a/arch/arm/mach-omap2/prm44xx_54xx.h
+++ b/arch/arm/mach-omap2/prm44xx_54xx.h
@@ -43,7 +43,7 @@ extern void omap4_prm_vcvp_write(u32 val, u8 offset);
extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
- defined(CONFIG_SOC_DRA7XX)
+ defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
void omap44xx_prm_reconfigure_io_chain(void);
#else
static inline void omap44xx_prm_reconfigure_io_chain(void)
diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c
index d4639c506622..9a4e910c3796 100644
--- a/arch/arm/mach-tegra/fuse.c
+++ b/arch/arm/mach-tegra/fuse.c
@@ -209,13 +209,3 @@ void __init tegra_init_fuse(void)
tegra_sku_id, tegra_cpu_process_id,
tegra_core_process_id);
}
-
-unsigned long long tegra_chip_uid(void)
-{
- unsigned long long lo, hi;
-
- lo = tegra_fuse_readl(FUSE_UID_LOW);
- hi = tegra_fuse_readl(FUSE_UID_HIGH);
- return (hi << 32ull) | lo;
-}
-EXPORT_SYMBOL(tegra_chip_uid);
diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c
index 033d34dcbd3f..c26ef5b92ca7 100644
--- a/arch/arm/mach-vexpress/spc.c
+++ b/arch/arm/mach-vexpress/spc.c
@@ -53,6 +53,11 @@
#define A15_BX_ADDR0 0x68
#define A7_BX_ADDR0 0x78
+/* SPC CPU/cluster reset statue */
+#define STANDBYWFI_STAT 0x3c
+#define STANDBYWFI_STAT_A15_CPU_MASK(cpu) (1 << (cpu))
+#define STANDBYWFI_STAT_A7_CPU_MASK(cpu) (1 << (3 + (cpu)))
+
/* SPC system config interface registers */
#define SYSCFG_WDATA 0x70
#define SYSCFG_RDATA 0x74
@@ -213,6 +218,41 @@ void ve_spc_powerdown(u32 cluster, bool enable)
writel_relaxed(enable, info->baseaddr + pwdrn_reg);
}
+static u32 standbywfi_cpu_mask(u32 cpu, u32 cluster)
+{
+ return cluster_is_a15(cluster) ?
+ STANDBYWFI_STAT_A15_CPU_MASK(cpu)
+ : STANDBYWFI_STAT_A7_CPU_MASK(cpu);
+}
+
+/**
+ * ve_spc_cpu_in_wfi(u32 cpu, u32 cluster)
+ *
+ * @cpu: mpidr[7:0] bitfield describing CPU affinity level within cluster
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ *
+ * @return: non-zero if and only if the specified CPU is in WFI
+ *
+ * Take care when interpreting the result of this function: a CPU might
+ * be in WFI temporarily due to idle, and is not necessarily safely
+ * parked.
+ */
+int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster)
+{
+ int ret;
+ u32 mask = standbywfi_cpu_mask(cpu, cluster);
+
+ if (cluster >= MAX_CLUSTERS)
+ return 1;
+
+ ret = readl_relaxed(info->baseaddr + STANDBYWFI_STAT);
+
+ pr_debug("%s: PCFGREG[0x%X] = 0x%08X, mask = 0x%X\n",
+ __func__, STANDBYWFI_STAT, ret, mask);
+
+ return ret & mask;
+}
+
static int ve_spc_get_performance(int cluster, u32 *freq)
{
struct ve_spc_opp *opps = info->opps[cluster];
diff --git a/arch/arm/mach-vexpress/spc.h b/arch/arm/mach-vexpress/spc.h
index dbd44c3720f9..793d065243b9 100644
--- a/arch/arm/mach-vexpress/spc.h
+++ b/arch/arm/mach-vexpress/spc.h
@@ -20,5 +20,6 @@ void ve_spc_global_wakeup_irq(bool set);
void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set);
void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr);
void ve_spc_powerdown(u32 cluster, bool enable);
+int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster);
#endif
diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c
index 05a364c5077a..29e7785a54bc 100644
--- a/arch/arm/mach-vexpress/tc2_pm.c
+++ b/arch/arm/mach-vexpress/tc2_pm.c
@@ -12,6 +12,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
@@ -32,11 +33,17 @@
#include "spc.h"
/* SCC conf registers */
+#define RESET_CTRL 0x018
+#define RESET_A15_NCORERESET(cpu) (1 << (2 + (cpu)))
+#define RESET_A7_NCORERESET(cpu) (1 << (16 + (cpu)))
+
#define A15_CONF 0x400
#define A7_CONF 0x500
#define SYS_INFO 0x700
#define SPC_BASE 0xb00
+static void __iomem *scc;
+
/*
* We can't use regular spinlocks. In the switcher case, it is possible
* for an outbound CPU to call power_down() after its inbound counterpart
@@ -190,6 +197,55 @@ static void tc2_pm_power_down(void)
tc2_pm_down(0);
}
+static int tc2_core_in_reset(unsigned int cpu, unsigned int cluster)
+{
+ u32 mask = cluster ?
+ RESET_A7_NCORERESET(cpu)
+ : RESET_A15_NCORERESET(cpu);
+
+ return !(readl_relaxed(scc + RESET_CTRL) & mask);
+}
+
+#define POLL_MSEC 10
+#define TIMEOUT_MSEC 1000
+
+static int tc2_pm_power_down_finish(unsigned int cpu, unsigned int cluster)
+{
+ unsigned tries;
+
+ pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+ BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
+
+ for (tries = 0; tries < TIMEOUT_MSEC / POLL_MSEC; ++tries) {
+ /*
+ * Only examine the hardware state if the target CPU has
+ * caught up at least as far as tc2_pm_down():
+ */
+ if (ACCESS_ONCE(tc2_pm_use_count[cpu][cluster]) == 0) {
+ pr_debug("%s(cpu=%u, cluster=%u): RESET_CTRL = 0x%08X\n",
+ __func__, cpu, cluster,
+ readl_relaxed(scc + RESET_CTRL));
+
+ /*
+ * We need the CPU to reach WFI, but the power
+ * controller may put the cluster in reset and
+ * power it off as soon as that happens, before
+ * we have a chance to see STANDBYWFI.
+ *
+ * So we need to check for both conditions:
+ */
+ if (tc2_core_in_reset(cpu, cluster) ||
+ ve_spc_cpu_in_wfi(cpu, cluster))
+ return 0; /* success: the CPU is halted */
+ }
+
+ /* Otherwise, wait and retry: */
+ msleep(POLL_MSEC);
+ }
+
+ return -ETIMEDOUT; /* timeout */
+}
+
static void tc2_pm_suspend(u64 residency)
{
unsigned int mpidr, cpu, cluster;
@@ -232,10 +288,11 @@ static void tc2_pm_powered_up(void)
}
static const struct mcpm_platform_ops tc2_pm_power_ops = {
- .power_up = tc2_pm_power_up,
- .power_down = tc2_pm_power_down,
- .suspend = tc2_pm_suspend,
- .powered_up = tc2_pm_powered_up,
+ .power_up = tc2_pm_power_up,
+ .power_down = tc2_pm_power_down,
+ .power_down_finish = tc2_pm_power_down_finish,
+ .suspend = tc2_pm_suspend,
+ .powered_up = tc2_pm_powered_up,
};
static bool __init tc2_pm_usage_count_init(void)
@@ -269,7 +326,6 @@ static void __naked tc2_pm_power_up_setup(unsigned int affinity_level)
static int __init tc2_pm_init(void)
{
int ret, irq;
- void __iomem *scc;
u32 a15_cluster_id, a7_cluster_id, sys_info;
struct device_node *np;
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 8a2463670a5b..0f4344e6fbca 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -75,8 +75,10 @@ LDEMULATION := lppc
GNUTARGET := powerpcle
MULTIPLEWORD := -mno-multiple
else
+ifeq ($(call cc-option-yn,-mbig-endian),y)
override CC += -mbig-endian
override AS += -mbig-endian
+endif
override LD += -EB
LDEMULATION := ppc
GNUTARGET := powerpc
@@ -128,7 +130,12 @@ CFLAGS-$(CONFIG_POWER5_CPU) += $(call cc-option,-mcpu=power5)
CFLAGS-$(CONFIG_POWER6_CPU) += $(call cc-option,-mcpu=power6)
CFLAGS-$(CONFIG_POWER7_CPU) += $(call cc-option,-mcpu=power7)
+# Altivec option not allowed with e500mc64 in GCC.
+ifeq ($(CONFIG_ALTIVEC),y)
+E5500_CPU := -mcpu=powerpc64
+else
E5500_CPU := $(call cc-option,-mcpu=e500mc64,-mcpu=powerpc64)
+endif
CFLAGS-$(CONFIG_E5500_CPU) += $(E5500_CPU)
CFLAGS-$(CONFIG_E6500_CPU) += $(call cc-option,-mcpu=e6500,$(E5500_CPU))
diff --git a/arch/powerpc/boot/dts/xcalibur1501.dts b/arch/powerpc/boot/dts/xcalibur1501.dts
index cc00f4ddd9a7..c409cbafb126 100644
--- a/arch/powerpc/boot/dts/xcalibur1501.dts
+++ b/arch/powerpc/boot/dts/xcalibur1501.dts
@@ -637,14 +637,14 @@
tlu@2f000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x2f000 0x1000>;
- interupts = <61 2 >;
+ interrupts = <61 2>;
interrupt-parent = <&mpic>;
};
tlu@15000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x15000 0x1000>;
- interupts = <75 2>;
+ interrupts = <75 2>;
interrupt-parent = <&mpic>;
};
};
diff --git a/arch/powerpc/boot/dts/xpedite5301.dts b/arch/powerpc/boot/dts/xpedite5301.dts
index 53c1c6a9752f..04cb410da48b 100644
--- a/arch/powerpc/boot/dts/xpedite5301.dts
+++ b/arch/powerpc/boot/dts/xpedite5301.dts
@@ -547,14 +547,14 @@
tlu@2f000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x2f000 0x1000>;
- interupts = <61 2 >;
+ interrupts = <61 2>;
interrupt-parent = <&mpic>;
};
tlu@15000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x15000 0x1000>;
- interupts = <75 2>;
+ interrupts = <75 2>;
interrupt-parent = <&mpic>;
};
};
diff --git a/arch/powerpc/boot/dts/xpedite5330.dts b/arch/powerpc/boot/dts/xpedite5330.dts
index 215225983150..73f8620f1ce7 100644
--- a/arch/powerpc/boot/dts/xpedite5330.dts
+++ b/arch/powerpc/boot/dts/xpedite5330.dts
@@ -583,14 +583,14 @@
tlu@2f000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x2f000 0x1000>;
- interupts = <61 2 >;
+ interrupts = <61 2>;
interrupt-parent = <&mpic>;
};
tlu@15000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x15000 0x1000>;
- interupts = <75 2>;
+ interrupts = <75 2>;
interrupt-parent = <&mpic>;
};
};
diff --git a/arch/powerpc/boot/dts/xpedite5370.dts b/arch/powerpc/boot/dts/xpedite5370.dts
index 11dbda10d756..cd0ea2b99362 100644
--- a/arch/powerpc/boot/dts/xpedite5370.dts
+++ b/arch/powerpc/boot/dts/xpedite5370.dts
@@ -545,14 +545,14 @@
tlu@2f000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x2f000 0x1000>;
- interupts = <61 2 >;
+ interrupts = <61 2>;
interrupt-parent = <&mpic>;
};
tlu@15000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x15000 0x1000>;
- interupts = <75 2>;
+ interrupts = <75 2>;
interrupt-parent = <&mpic>;
};
};
diff --git a/arch/powerpc/boot/util.S b/arch/powerpc/boot/util.S
index 5143228e3e5f..6636b1d7821b 100644
--- a/arch/powerpc/boot/util.S
+++ b/arch/powerpc/boot/util.S
@@ -71,18 +71,32 @@ udelay:
add r4,r4,r5
addi r4,r4,-1
divw r4,r4,r5 /* BUS ticks */
+#ifdef CONFIG_8xx
+1: mftbu r5
+ mftb r6
+ mftbu r7
+#else
1: mfspr r5, SPRN_TBRU
mfspr r6, SPRN_TBRL
mfspr r7, SPRN_TBRU
+#endif
cmpw 0,r5,r7
bne 1b /* Get [synced] base time */
addc r9,r6,r4 /* Compute end time */
addze r8,r5
+#ifdef CONFIG_8xx
+2: mftbu r5
+#else
2: mfspr r5, SPRN_TBRU
+#endif
cmpw 0,r5,r8
blt 2b
bgt 3f
+#ifdef CONFIG_8xx
+ mftb r6
+#else
mfspr r6, SPRN_TBRL
+#endif
cmpw 0,r6,r9
blt 2b
3: blr
diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h
index 16cb92d215d2..694012877bf7 100644
--- a/arch/powerpc/include/asm/pgalloc-64.h
+++ b/arch/powerpc/include/asm/pgalloc-64.h
@@ -16,6 +16,7 @@ struct vmemmap_backing {
unsigned long phys;
unsigned long virt_addr;
};
+extern struct vmemmap_backing *vmemmap_list;
/*
* Functions that deal with pagetables that could be at any level of
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 3c1acc31a092..f595b98079ee 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -366,6 +366,8 @@ BEGIN_FTR_SECTION_NESTED(96); \
cmpwi dest,0; \
beq- 90b; \
END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96)
+#elif defined(CONFIG_8xx)
+#define MFTB(dest) mftb dest
#else
#define MFTB(dest) mfspr dest, SPRN_TBRL
#endif
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 5c45787d551e..fa8388ed94c5 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -1174,12 +1174,19 @@
#else /* __powerpc64__ */
+#if defined(CONFIG_8xx)
+#define mftbl() ({unsigned long rval; \
+ asm volatile("mftbl %0" : "=r" (rval)); rval;})
+#define mftbu() ({unsigned long rval; \
+ asm volatile("mftbu %0" : "=r" (rval)); rval;})
+#else
#define mftbl() ({unsigned long rval; \
asm volatile("mfspr %0, %1" : "=r" (rval) : \
"i" (SPRN_TBRL)); rval;})
#define mftbu() ({unsigned long rval; \
asm volatile("mfspr %0, %1" : "=r" (rval) : \
"i" (SPRN_TBRU)); rval;})
+#endif
#endif /* !__powerpc64__ */
#define mttbl(v) asm volatile("mttbl %0":: "r"(v))
diff --git a/arch/powerpc/include/asm/timex.h b/arch/powerpc/include/asm/timex.h
index 18908caa1f3b..2cf846edb3fc 100644
--- a/arch/powerpc/include/asm/timex.h
+++ b/arch/powerpc/include/asm/timex.h
@@ -29,7 +29,11 @@ static inline cycles_t get_cycles(void)
ret = 0;
__asm__ __volatile__(
+#ifdef CONFIG_8xx
+ "97: mftb %0\n"
+#else
"97: mfspr %0, %2\n"
+#endif
"99:\n"
".section __ftr_fixup,\"a\"\n"
".align 2\n"
@@ -41,7 +45,11 @@ static inline cycles_t get_cycles(void)
" .long 0\n"
" .long 0\n"
".previous"
+#ifdef CONFIG_8xx
+ : "=r" (ret) : "i" (CPU_FTR_601));
+#else
: "=r" (ret) : "i" (CPU_FTR_601), "i" (SPRN_TBRL));
+#endif
return ret;
#endif
}
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index e1ec57e87b3b..88a7fb458dfd 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -18,6 +18,7 @@
#include <linux/ftrace.h>
#include <asm/machdep.h>
+#include <asm/pgalloc.h>
#include <asm/prom.h>
#include <asm/sections.h>
@@ -75,6 +76,17 @@ void arch_crash_save_vmcoreinfo(void)
#ifndef CONFIG_NEED_MULTIPLE_NODES
VMCOREINFO_SYMBOL(contig_page_data);
#endif
+#if defined(CONFIG_PPC64) && defined(CONFIG_SPARSEMEM_VMEMMAP)
+ VMCOREINFO_SYMBOL(vmemmap_list);
+ VMCOREINFO_SYMBOL(mmu_vmemmap_psize);
+ VMCOREINFO_SYMBOL(mmu_psize_defs);
+ VMCOREINFO_STRUCT_SIZE(vmemmap_backing);
+ VMCOREINFO_OFFSET(vmemmap_backing, list);
+ VMCOREINFO_OFFSET(vmemmap_backing, phys);
+ VMCOREINFO_OFFSET(vmemmap_backing, virt_addr);
+ VMCOREINFO_STRUCT_SIZE(mmu_psize_def);
+ VMCOREINFO_OFFSET(mmu_psize_def, shift);
+#endif
}
/*
diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c
index fd82c289ab1c..28b898e68185 100644
--- a/arch/powerpc/kernel/nvram_64.c
+++ b/arch/powerpc/kernel/nvram_64.c
@@ -210,7 +210,7 @@ static void __init nvram_print_partitions(char * label)
printk(KERN_WARNING "--------%s---------\n", label);
printk(KERN_WARNING "indx\t\tsig\tchks\tlen\tname\n");
list_for_each_entry(tmp_part, &nvram_partitions, partition) {
- printk(KERN_WARNING "%4d \t%02x\t%02x\t%d\t%12s\n",
+ printk(KERN_WARNING "%4d \t%02x\t%02x\t%d\t%12.12s\n",
tmp_part->index, tmp_part->header.signature,
tmp_part->header.checksum, tmp_part->header.length,
tmp_part->header.name);
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index 1844298f5ea4..68027bfa5f8e 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -445,6 +445,12 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
#endif /* CONFIG_ALTIVEC */
if (copy_fpr_to_user(&frame->mc_fregs, current))
return 1;
+
+ /*
+ * Clear the MSR VSX bit to indicate there is no valid state attached
+ * to this context, except in the specific case below where we set it.
+ */
+ msr &= ~MSR_VSX;
#ifdef CONFIG_VSX
/*
* Copy VSR 0-31 upper half from thread_struct to local
@@ -457,15 +463,7 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
if (copy_vsx_to_user(&frame->mc_vsregs, current))
return 1;
msr |= MSR_VSX;
- } else if (!ctx_has_vsx_region)
- /*
- * With a small context structure we can't hold the VSX
- * registers, hence clear the MSR value to indicate the state
- * was not saved.
- */
- msr &= ~MSR_VSX;
-
-
+ }
#endif /* CONFIG_VSX */
#ifdef CONFIG_SPE
/* save spe registers */
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index e66f67b8b9e6..42991045349f 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -122,6 +122,12 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
flush_fp_to_thread(current);
/* copy fpr regs and fpscr */
err |= copy_fpr_to_user(&sc->fp_regs, current);
+
+ /*
+ * Clear the MSR VSX bit to indicate there is no valid state attached
+ * to this context, except in the specific case below where we set it.
+ */
+ msr &= ~MSR_VSX;
#ifdef CONFIG_VSX
/*
* Copy VSX low doubleword to local buffer for formatting,
diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S
index 6b1f2a6d5517..6b2b69616e77 100644
--- a/arch/powerpc/kernel/vdso32/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso32/gettimeofday.S
@@ -232,9 +232,15 @@ __do_get_tspec:
lwz r6,(CFG_TB_ORIG_STAMP+4)(r9)
/* Get a stable TB value */
+#ifdef CONFIG_8xx
+2: mftbu r3
+ mftbl r4
+ mftbu r0
+#else
2: mfspr r3, SPRN_TBRU
mfspr r4, SPRN_TBRL
mfspr r0, SPRN_TBRU
+#endif
cmplw cr0,r3,r0
bne- 2b
diff --git a/arch/powerpc/mm/hugetlbpage-book3e.c b/arch/powerpc/mm/hugetlbpage-book3e.c
index 3bc700655fc8..74551b5e41e5 100644
--- a/arch/powerpc/mm/hugetlbpage-book3e.c
+++ b/arch/powerpc/mm/hugetlbpage-book3e.c
@@ -117,6 +117,5 @@ void flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
struct hstate *hstate = hstate_file(vma->vm_file);
unsigned long tsize = huge_page_shift(hstate) - 10;
- __flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr, tsize, 0);
-
+ __flush_tlb_page(vma->vm_mm, vmaddr, tsize, 0);
}
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 41cd68dee681..358d74303138 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -305,7 +305,7 @@ void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
{
#ifdef CONFIG_HUGETLB_PAGE
- if (is_vm_hugetlb_page(vma))
+ if (vma && is_vm_hugetlb_page(vma))
flush_hugetlb_page(vma, vmaddr);
#endif
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 132f8726a257..bca2465a9c34 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -404,13 +404,27 @@ config PPC_DOORBELL
endmenu
-config CPU_LITTLE_ENDIAN
- bool "Build little endian kernel"
- default n
+choice
+ prompt "Endianness selection"
+ default CPU_BIG_ENDIAN
help
This option selects whether a big endian or little endian kernel will
be built.
+config CPU_BIG_ENDIAN
+ bool "Build big endian kernel"
+ help
+ Build a big endian kernel.
+
+ If unsure, select this option.
+
+config CPU_LITTLE_ENDIAN
+ bool "Build little endian kernel"
+ help
+ Build a little endian kernel.
+
Note that if cross compiling a little endian kernel,
CROSS_COMPILE must point to a toolchain capable of targeting
little endian powerpc.
+
+endchoice
diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c
index 46cae138ece2..4363528dc8fd 100644
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -35,7 +35,6 @@ static u8 *ctrblk;
static char keylen_flag;
struct s390_aes_ctx {
- u8 iv[AES_BLOCK_SIZE];
u8 key[AES_MAX_KEY_SIZE];
long enc;
long dec;
@@ -441,30 +440,36 @@ static int cbc_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
return aes_set_key(tfm, in_key, key_len);
}
-static int cbc_aes_crypt(struct blkcipher_desc *desc, long func, void *param,
+static int cbc_aes_crypt(struct blkcipher_desc *desc, long func,
struct blkcipher_walk *walk)
{
+ struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
int ret = blkcipher_walk_virt(desc, walk);
unsigned int nbytes = walk->nbytes;
+ struct {
+ u8 iv[AES_BLOCK_SIZE];
+ u8 key[AES_MAX_KEY_SIZE];
+ } param;
if (!nbytes)
goto out;
- memcpy(param, walk->iv, AES_BLOCK_SIZE);
+ memcpy(param.iv, walk->iv, AES_BLOCK_SIZE);
+ memcpy(param.key, sctx->key, sctx->key_len);
do {
/* only use complete blocks */
unsigned int n = nbytes & ~(AES_BLOCK_SIZE - 1);
u8 *out = walk->dst.virt.addr;
u8 *in = walk->src.virt.addr;
- ret = crypt_s390_kmc(func, param, out, in, n);
+ ret = crypt_s390_kmc(func, &param, out, in, n);
if (ret < 0 || ret != n)
return -EIO;
nbytes &= AES_BLOCK_SIZE - 1;
ret = blkcipher_walk_done(desc, walk, nbytes);
} while ((nbytes = walk->nbytes));
- memcpy(walk->iv, param, AES_BLOCK_SIZE);
+ memcpy(walk->iv, param.iv, AES_BLOCK_SIZE);
out:
return ret;
@@ -481,7 +486,7 @@ static int cbc_aes_encrypt(struct blkcipher_desc *desc,
return fallback_blk_enc(desc, dst, src, nbytes);
blkcipher_walk_init(&walk, dst, src, nbytes);
- return cbc_aes_crypt(desc, sctx->enc, sctx->iv, &walk);
+ return cbc_aes_crypt(desc, sctx->enc, &walk);
}
static int cbc_aes_decrypt(struct blkcipher_desc *desc,
@@ -495,7 +500,7 @@ static int cbc_aes_decrypt(struct blkcipher_desc *desc,
return fallback_blk_dec(desc, dst, src, nbytes);
blkcipher_walk_init(&walk, dst, src, nbytes);
- return cbc_aes_crypt(desc, sctx->dec, sctx->iv, &walk);
+ return cbc_aes_crypt(desc, sctx->dec, &walk);
}
static struct crypto_alg cbc_aes_alg = {
diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
index 7d6ba9db1be9..e0fc24db234a 100644
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -3,8 +3,9 @@
#
avx_supported := $(call as-instr,vpxor %xmm0$(comma)%xmm0$(comma)%xmm0,yes,no)
+avx2_supported := $(call as-instr,vpgatherdd %ymm0$(comma)(%eax$(comma)%ymm1\
+ $(comma)4)$(comma)%ymm2,yes,no)
-obj-$(CONFIG_CRYPTO_ABLK_HELPER_X86) += ablk_helper.o
obj-$(CONFIG_CRYPTO_GLUE_HELPER_X86) += glue_helper.o
obj-$(CONFIG_CRYPTO_AES_586) += aes-i586.o
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index f80e668785c0..835488b745ee 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -34,7 +34,7 @@
#include <asm/cpu_device_id.h>
#include <asm/i387.h>
#include <asm/crypto/aes.h>
-#include <asm/crypto/ablk_helper.h>
+#include <crypto/ablk_helper.h>
#include <crypto/scatterwalk.h>
#include <crypto/internal/aead.h>
#include <linux/workqueue.h>
diff --git a/arch/x86/crypto/camellia_aesni_avx2_glue.c b/arch/x86/crypto/camellia_aesni_avx2_glue.c
index 414fe5d7946b..4209a76fcdaa 100644
--- a/arch/x86/crypto/camellia_aesni_avx2_glue.c
+++ b/arch/x86/crypto/camellia_aesni_avx2_glue.c
@@ -14,6 +14,7 @@
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/ctr.h>
#include <crypto/lrw.h>
@@ -21,7 +22,6 @@
#include <asm/xcr.h>
#include <asm/xsave.h>
#include <asm/crypto/camellia.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
#define CAMELLIA_AESNI_PARALLEL_BLOCKS 16
diff --git a/arch/x86/crypto/camellia_aesni_avx_glue.c b/arch/x86/crypto/camellia_aesni_avx_glue.c
index 37fd0c0a81ea..87a041a10f4a 100644
--- a/arch/x86/crypto/camellia_aesni_avx_glue.c
+++ b/arch/x86/crypto/camellia_aesni_avx_glue.c
@@ -14,6 +14,7 @@
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/ctr.h>
#include <crypto/lrw.h>
@@ -21,7 +22,6 @@
#include <asm/xcr.h>
#include <asm/xsave.h>
#include <asm/crypto/camellia.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
#define CAMELLIA_AESNI_PARALLEL_BLOCKS 16
diff --git a/arch/x86/crypto/cast5_avx_glue.c b/arch/x86/crypto/cast5_avx_glue.c
index c6631813dc11..e6a3700489b9 100644
--- a/arch/x86/crypto/cast5_avx_glue.c
+++ b/arch/x86/crypto/cast5_avx_glue.c
@@ -26,13 +26,13 @@
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/cast5.h>
#include <crypto/cryptd.h>
#include <crypto/ctr.h>
#include <asm/xcr.h>
#include <asm/xsave.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
#define CAST5_PARALLEL_BLOCKS 16
diff --git a/arch/x86/crypto/cast6_avx_glue.c b/arch/x86/crypto/cast6_avx_glue.c
index 8d0dfb86a559..09f3677393e4 100644
--- a/arch/x86/crypto/cast6_avx_glue.c
+++ b/arch/x86/crypto/cast6_avx_glue.c
@@ -28,6 +28,7 @@
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/cast6.h>
#include <crypto/cryptd.h>
@@ -37,7 +38,6 @@
#include <crypto/xts.h>
#include <asm/xcr.h>
#include <asm/xsave.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
#define CAST6_PARALLEL_BLOCKS 8
diff --git a/arch/x86/crypto/serpent_avx2_glue.c b/arch/x86/crypto/serpent_avx2_glue.c
index 23aabc6c20a5..2fae489b1524 100644
--- a/arch/x86/crypto/serpent_avx2_glue.c
+++ b/arch/x86/crypto/serpent_avx2_glue.c
@@ -14,6 +14,7 @@
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/ctr.h>
#include <crypto/lrw.h>
@@ -22,7 +23,6 @@
#include <asm/xcr.h>
#include <asm/xsave.h>
#include <asm/crypto/serpent-avx.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
#define SERPENT_AVX2_PARALLEL_BLOCKS 16
diff --git a/arch/x86/crypto/serpent_avx_glue.c b/arch/x86/crypto/serpent_avx_glue.c
index 9ae83cf8d21e..ff4870870972 100644
--- a/arch/x86/crypto/serpent_avx_glue.c
+++ b/arch/x86/crypto/serpent_avx_glue.c
@@ -28,6 +28,7 @@
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/serpent.h>
#include <crypto/cryptd.h>
@@ -38,7 +39,6 @@
#include <asm/xcr.h>
#include <asm/xsave.h>
#include <asm/crypto/serpent-avx.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
/* 8-way parallel cipher functions */
diff --git a/arch/x86/crypto/serpent_sse2_glue.c b/arch/x86/crypto/serpent_sse2_glue.c
index 97a356ece24d..8c95f8637306 100644
--- a/arch/x86/crypto/serpent_sse2_glue.c
+++ b/arch/x86/crypto/serpent_sse2_glue.c
@@ -34,6 +34,7 @@
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/serpent.h>
#include <crypto/cryptd.h>
@@ -42,7 +43,6 @@
#include <crypto/lrw.h>
#include <crypto/xts.h>
#include <asm/crypto/serpent-sse2.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
static void serpent_decrypt_cbc_xway(void *ctx, u128 *dst, const u128 *src)
diff --git a/arch/x86/crypto/sha256_ssse3_glue.c b/arch/x86/crypto/sha256_ssse3_glue.c
index 50226c4b86ed..f248546da1ca 100644
--- a/arch/x86/crypto/sha256_ssse3_glue.c
+++ b/arch/x86/crypto/sha256_ssse3_glue.c
@@ -281,7 +281,7 @@ static int __init sha256_ssse3_mod_init(void)
/* allow AVX to override SSSE3, it's a little faster */
if (avx_usable()) {
#ifdef CONFIG_AS_AVX2
- if (boot_cpu_has(X86_FEATURE_AVX2))
+ if (boot_cpu_has(X86_FEATURE_AVX2) && boot_cpu_has(X86_FEATURE_BMI2))
sha256_transform_asm = sha256_transform_rorx;
else
#endif
@@ -319,4 +319,4 @@ MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("SHA256 Secure Hash Algorithm, Supplemental SSE3 accelerated");
MODULE_ALIAS("sha256");
-MODULE_ALIAS("sha384");
+MODULE_ALIAS("sha224");
diff --git a/arch/x86/crypto/twofish_avx_glue.c b/arch/x86/crypto/twofish_avx_glue.c
index a62ba541884e..4e3c665be129 100644
--- a/arch/x86/crypto/twofish_avx_glue.c
+++ b/arch/x86/crypto/twofish_avx_glue.c
@@ -28,6 +28,7 @@
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/twofish.h>
#include <crypto/cryptd.h>
@@ -39,7 +40,6 @@
#include <asm/xcr.h>
#include <asm/xsave.h>
#include <asm/crypto/twofish.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
#include <crypto/scatterwalk.h>
#include <linux/workqueue.h>
diff --git a/arch/x86/include/asm/simd.h b/arch/x86/include/asm/simd.h
new file mode 100644
index 000000000000..ee80b92f0096
--- /dev/null
+++ b/arch/x86/include/asm/simd.h
@@ -0,0 +1,11 @@
+
+#include <asm/i387.h>
+
+/*
+ * may_use_simd - whether it is allowable at this time to issue SIMD
+ * instructions or access the SIMD register file
+ */
+static __must_check inline bool may_use_simd(void)
+{
+ return irq_fpu_usable();
+}
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 4ae5734fb473..7bcb70d216e1 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -174,9 +174,8 @@ config CRYPTO_TEST
help
Quick & dirty crypto test module.
-config CRYPTO_ABLK_HELPER_X86
+config CRYPTO_ABLK_HELPER
tristate
- depends on X86
select CRYPTO_CRYPTD
config CRYPTO_GLUE_HELPER_X86
@@ -695,7 +694,7 @@ config CRYPTO_AES_NI_INTEL
select CRYPTO_AES_X86_64 if 64BIT
select CRYPTO_AES_586 if !64BIT
select CRYPTO_CRYPTD
- select CRYPTO_ABLK_HELPER_X86
+ select CRYPTO_ABLK_HELPER
select CRYPTO_ALGAPI
select CRYPTO_GLUE_HELPER_X86 if 64BIT
select CRYPTO_LRW
@@ -895,7 +894,7 @@ config CRYPTO_CAMELLIA_AESNI_AVX_X86_64
depends on CRYPTO
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
- select CRYPTO_ABLK_HELPER_X86
+ select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_CAMELLIA_X86_64
select CRYPTO_LRW
@@ -917,7 +916,7 @@ config CRYPTO_CAMELLIA_AESNI_AVX2_X86_64
depends on CRYPTO
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
- select CRYPTO_ABLK_HELPER_X86
+ select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_CAMELLIA_X86_64
select CRYPTO_CAMELLIA_AESNI_AVX_X86_64
@@ -969,7 +968,7 @@ config CRYPTO_CAST5_AVX_X86_64
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
- select CRYPTO_ABLK_HELPER_X86
+ select CRYPTO_ABLK_HELPER
select CRYPTO_CAST_COMMON
select CRYPTO_CAST5
help
@@ -992,7 +991,7 @@ config CRYPTO_CAST6_AVX_X86_64
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
- select CRYPTO_ABLK_HELPER_X86
+ select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_CAST_COMMON
select CRYPTO_CAST6
@@ -1110,7 +1109,7 @@ config CRYPTO_SERPENT_SSE2_X86_64
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
- select CRYPTO_ABLK_HELPER_X86
+ select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_SERPENT
select CRYPTO_LRW
@@ -1132,7 +1131,7 @@ config CRYPTO_SERPENT_SSE2_586
depends on X86 && !64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
- select CRYPTO_ABLK_HELPER_X86
+ select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_SERPENT
select CRYPTO_LRW
@@ -1154,7 +1153,7 @@ config CRYPTO_SERPENT_AVX_X86_64
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
- select CRYPTO_ABLK_HELPER_X86
+ select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_SERPENT
select CRYPTO_LRW
@@ -1176,7 +1175,7 @@ config CRYPTO_SERPENT_AVX2_X86_64
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
- select CRYPTO_ABLK_HELPER_X86
+ select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_SERPENT
select CRYPTO_SERPENT_AVX_X86_64
@@ -1292,7 +1291,7 @@ config CRYPTO_TWOFISH_AVX_X86_64
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
- select CRYPTO_ABLK_HELPER_X86
+ select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_TWOFISH_COMMON
select CRYPTO_TWOFISH_X86_64
diff --git a/crypto/Makefile b/crypto/Makefile
index b3a7e807e08b..989c510da8cc 100644
--- a/crypto/Makefile
+++ b/crypto/Makefile
@@ -2,8 +2,13 @@
# Cryptographic API
#
+# memneq MUST be built with -Os or -O0 to prevent early-return optimizations
+# that will defeat memneq's actual purpose to prevent timing attacks.
+CFLAGS_REMOVE_memneq.o := -O1 -O2 -O3
+CFLAGS_memneq.o := -Os
+
obj-$(CONFIG_CRYPTO) += crypto.o
-crypto-y := api.o cipher.o compress.o
+crypto-y := api.o cipher.o compress.o memneq.o
obj-$(CONFIG_CRYPTO_WORKQUEUE) += crypto_wq.o
@@ -105,3 +110,4 @@ obj-$(CONFIG_XOR_BLOCKS) += xor.o
obj-$(CONFIG_ASYNC_CORE) += async_tx/
obj-$(CONFIG_ASYMMETRIC_KEY_TYPE) += asymmetric_keys/
obj-$(CONFIG_CRYPTO_HASH_INFO) += hash_info.o
+obj-$(CONFIG_CRYPTO_ABLK_HELPER) += ablk_helper.o
diff --git a/arch/x86/crypto/ablk_helper.c b/crypto/ablk_helper.c
index 43282fe04a8b..ffe7278d4bd8 100644
--- a/arch/x86/crypto/ablk_helper.c
+++ b/crypto/ablk_helper.c
@@ -28,10 +28,11 @@
#include <linux/crypto.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/hardirq.h>
#include <crypto/algapi.h>
#include <crypto/cryptd.h>
-#include <asm/i387.h>
-#include <asm/crypto/ablk_helper.h>
+#include <crypto/ablk_helper.h>
+#include <asm/simd.h>
int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key,
unsigned int key_len)
@@ -70,11 +71,11 @@ int ablk_encrypt(struct ablkcipher_request *req)
struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm);
- if (!irq_fpu_usable()) {
+ if (!may_use_simd()) {
struct ablkcipher_request *cryptd_req =
ablkcipher_request_ctx(req);
- memcpy(cryptd_req, req, sizeof(*req));
+ *cryptd_req = *req;
ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base);
return crypto_ablkcipher_encrypt(cryptd_req);
@@ -89,11 +90,11 @@ int ablk_decrypt(struct ablkcipher_request *req)
struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm);
- if (!irq_fpu_usable()) {
+ if (!may_use_simd()) {
struct ablkcipher_request *cryptd_req =
ablkcipher_request_ctx(req);
- memcpy(cryptd_req, req, sizeof(*req));
+ *cryptd_req = *req;
ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base);
return crypto_ablkcipher_decrypt(cryptd_req);
diff --git a/crypto/ablkcipher.c b/crypto/ablkcipher.c
index 7d4a8d28277e..40886c489903 100644
--- a/crypto/ablkcipher.c
+++ b/crypto/ablkcipher.c
@@ -16,9 +16,7 @@
#include <crypto/internal/skcipher.h>
#include <linux/cpumask.h>
#include <linux/err.h>
-#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/rtnetlink.h>
#include <linux/sched.h>
#include <linux/slab.h>
@@ -30,8 +28,6 @@
#include "internal.h"
-static const char *skcipher_default_geniv __read_mostly;
-
struct ablkcipher_buffer {
struct list_head entry;
struct scatter_walk dst;
@@ -527,8 +523,7 @@ const char *crypto_default_geniv(const struct crypto_alg *alg)
alg->cra_blocksize)
return "chainiv";
- return alg->cra_flags & CRYPTO_ALG_ASYNC ?
- "eseqiv" : skcipher_default_geniv;
+ return "eseqiv";
}
static int crypto_givcipher_default(struct crypto_alg *alg, u32 type, u32 mask)
@@ -709,17 +704,3 @@ err:
return ERR_PTR(err);
}
EXPORT_SYMBOL_GPL(crypto_alloc_ablkcipher);
-
-static int __init skcipher_module_init(void)
-{
- skcipher_default_geniv = num_possible_cpus() > 1 ?
- "eseqiv" : "chainiv";
- return 0;
-}
-
-static void skcipher_module_exit(void)
-{
-}
-
-module_init(skcipher_module_init);
-module_exit(skcipher_module_exit);
diff --git a/crypto/ansi_cprng.c b/crypto/ansi_cprng.c
index c0bb3778f1ae..666f1962a160 100644
--- a/crypto/ansi_cprng.c
+++ b/crypto/ansi_cprng.c
@@ -230,11 +230,11 @@ remainder:
*/
if (byte_count < DEFAULT_BLK_SZ) {
empty_rbuf:
- for (; ctx->rand_data_valid < DEFAULT_BLK_SZ;
- ctx->rand_data_valid++) {
+ while (ctx->rand_data_valid < DEFAULT_BLK_SZ) {
*ptr = ctx->rand_data[ctx->rand_data_valid];
ptr++;
byte_count--;
+ ctx->rand_data_valid++;
if (byte_count == 0)
goto done;
}
diff --git a/crypto/asymmetric_keys/rsa.c b/crypto/asymmetric_keys/rsa.c
index 90a17f59ba28..459cf97a75e2 100644
--- a/crypto/asymmetric_keys/rsa.c
+++ b/crypto/asymmetric_keys/rsa.c
@@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <crypto/algapi.h>
#include "public_key.h"
MODULE_LICENSE("GPL");
@@ -189,12 +190,12 @@ static int RSA_verify(const u8 *H, const u8 *EM, size_t k, size_t hash_size,
}
}
- if (memcmp(asn1_template, EM + T_offset, asn1_size) != 0) {
+ if (crypto_memneq(asn1_template, EM + T_offset, asn1_size) != 0) {
kleave(" = -EBADMSG [EM[T] ASN.1 mismatch]");
return -EBADMSG;
}
- if (memcmp(H, EM + T_offset + asn1_size, hash_size) != 0) {
+ if (crypto_memneq(H, EM + T_offset + asn1_size, hash_size) != 0) {
kleave(" = -EKEYREJECTED [EM[T] hash mismatch]");
return -EKEYREJECTED;
}
diff --git a/crypto/asymmetric_keys/x509_public_key.c b/crypto/asymmetric_keys/x509_public_key.c
index f83300b6e8c1..382ef0d2ff2e 100644
--- a/crypto/asymmetric_keys/x509_public_key.c
+++ b/crypto/asymmetric_keys/x509_public_key.c
@@ -18,60 +18,12 @@
#include <linux/asn1_decoder.h>
#include <keys/asymmetric-subtype.h>
#include <keys/asymmetric-parser.h>
-#include <keys/system_keyring.h>
#include <crypto/hash.h>
#include "asymmetric_keys.h"
#include "public_key.h"
#include "x509_parser.h"
/*
- * Find a key in the given keyring by issuer and authority.
- */
-static struct key *x509_request_asymmetric_key(
- struct key *keyring,
- const char *signer, size_t signer_len,
- const char *authority, size_t auth_len)
-{
- key_ref_t key;
- char *id;
-
- /* Construct an identifier. */
- id = kmalloc(signer_len + 2 + auth_len + 1, GFP_KERNEL);
- if (!id)
- return ERR_PTR(-ENOMEM);
-
- memcpy(id, signer, signer_len);
- id[signer_len + 0] = ':';
- id[signer_len + 1] = ' ';
- memcpy(id + signer_len + 2, authority, auth_len);
- id[signer_len + 2 + auth_len] = 0;
-
- pr_debug("Look up: \"%s\"\n", id);
-
- key = keyring_search(make_key_ref(keyring, 1),
- &key_type_asymmetric, id);
- if (IS_ERR(key))
- pr_debug("Request for module key '%s' err %ld\n",
- id, PTR_ERR(key));
- kfree(id);
-
- if (IS_ERR(key)) {
- switch (PTR_ERR(key)) {
- /* Hide some search errors */
- case -EACCES:
- case -ENOTDIR:
- case -EAGAIN:
- return ERR_PTR(-ENOKEY);
- default:
- return ERR_CAST(key);
- }
- }
-
- pr_devel("<==%s() = 0 [%x]\n", __func__, key_serial(key_ref_to_ptr(key)));
- return key_ref_to_ptr(key);
-}
-
-/*
* Set up the signature parameters in an X.509 certificate. This involves
* digesting the signed data and extracting the signature.
*/
@@ -151,33 +103,6 @@ int x509_check_signature(const struct public_key *pub,
EXPORT_SYMBOL_GPL(x509_check_signature);
/*
- * Check the new certificate against the ones in the trust keyring. If one of
- * those is the signing key and validates the new certificate, then mark the
- * new certificate as being trusted.
- *
- * Return 0 if the new certificate was successfully validated, 1 if we couldn't
- * find a matching parent certificate in the trusted list and an error if there
- * is a matching certificate but the signature check fails.
- */
-static int x509_validate_trust(struct x509_certificate *cert,
- struct key *trust_keyring)
-{
- const struct public_key *pk;
- struct key *key;
- int ret = 1;
-
- key = x509_request_asymmetric_key(trust_keyring,
- cert->issuer, strlen(cert->issuer),
- cert->authority,
- strlen(cert->authority));
- if (!IS_ERR(key)) {
- pk = key->payload.data;
- ret = x509_check_signature(pk, cert);
- }
- return ret;
-}
-
-/*
* Attempt to parse a data blob for a key as an X509 certificate.
*/
static int x509_key_preparse(struct key_preparsed_payload *prep)
@@ -230,13 +155,9 @@ static int x509_key_preparse(struct key_preparsed_payload *prep)
/* Check the signature on the key if it appears to be self-signed */
if (!cert->authority ||
strcmp(cert->fingerprint, cert->authority) == 0) {
- ret = x509_check_signature(cert->pub, cert); /* self-signed */
+ ret = x509_check_signature(cert->pub, cert);
if (ret < 0)
goto error_free_cert;
- } else {
- ret = x509_validate_trust(cert, system_trusted_keyring);
- if (!ret)
- prep->trusted = 1;
}
/* Propose a description */
diff --git a/crypto/authenc.c b/crypto/authenc.c
index ffce19de05cf..1875e7026e8f 100644
--- a/crypto/authenc.c
+++ b/crypto/authenc.c
@@ -52,40 +52,52 @@ static void authenc_request_complete(struct aead_request *req, int err)
aead_request_complete(req, err);
}
-static int crypto_authenc_setkey(struct crypto_aead *authenc, const u8 *key,
- unsigned int keylen)
+int crypto_authenc_extractkeys(struct crypto_authenc_keys *keys, const u8 *key,
+ unsigned int keylen)
{
- unsigned int authkeylen;
- unsigned int enckeylen;
- struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
- struct crypto_ahash *auth = ctx->auth;
- struct crypto_ablkcipher *enc = ctx->enc;
- struct rtattr *rta = (void *)key;
+ struct rtattr *rta = (struct rtattr *)key;
struct crypto_authenc_key_param *param;
- int err = -EINVAL;
if (!RTA_OK(rta, keylen))
- goto badkey;
+ return -EINVAL;
if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
- goto badkey;
+ return -EINVAL;
if (RTA_PAYLOAD(rta) < sizeof(*param))
- goto badkey;
+ return -EINVAL;
param = RTA_DATA(rta);
- enckeylen = be32_to_cpu(param->enckeylen);
+ keys->enckeylen = be32_to_cpu(param->enckeylen);
key += RTA_ALIGN(rta->rta_len);
keylen -= RTA_ALIGN(rta->rta_len);
- if (keylen < enckeylen)
- goto badkey;
+ if (keylen < keys->enckeylen)
+ return -EINVAL;
- authkeylen = keylen - enckeylen;
+ keys->authkeylen = keylen - keys->enckeylen;
+ keys->authkey = key;
+ keys->enckey = key + keys->authkeylen;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(crypto_authenc_extractkeys);
+
+static int crypto_authenc_setkey(struct crypto_aead *authenc, const u8 *key,
+ unsigned int keylen)
+{
+ struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
+ struct crypto_ahash *auth = ctx->auth;
+ struct crypto_ablkcipher *enc = ctx->enc;
+ struct crypto_authenc_keys keys;
+ int err = -EINVAL;
+
+ if (crypto_authenc_extractkeys(&keys, key, keylen) != 0)
+ goto badkey;
crypto_ahash_clear_flags(auth, CRYPTO_TFM_REQ_MASK);
crypto_ahash_set_flags(auth, crypto_aead_get_flags(authenc) &
CRYPTO_TFM_REQ_MASK);
- err = crypto_ahash_setkey(auth, key, authkeylen);
+ err = crypto_ahash_setkey(auth, keys.authkey, keys.authkeylen);
crypto_aead_set_flags(authenc, crypto_ahash_get_flags(auth) &
CRYPTO_TFM_RES_MASK);
@@ -95,7 +107,7 @@ static int crypto_authenc_setkey(struct crypto_aead *authenc, const u8 *key,
crypto_ablkcipher_clear_flags(enc, CRYPTO_TFM_REQ_MASK);
crypto_ablkcipher_set_flags(enc, crypto_aead_get_flags(authenc) &
CRYPTO_TFM_REQ_MASK);
- err = crypto_ablkcipher_setkey(enc, key + authkeylen, enckeylen);
+ err = crypto_ablkcipher_setkey(enc, keys.enckey, keys.enckeylen);
crypto_aead_set_flags(authenc, crypto_ablkcipher_get_flags(enc) &
CRYPTO_TFM_RES_MASK);
@@ -188,7 +200,7 @@ static void authenc_verify_ahash_update_done(struct crypto_async_request *areq,
scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
authsize, 0);
- err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
+ err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
if (err)
goto out;
@@ -227,7 +239,7 @@ static void authenc_verify_ahash_done(struct crypto_async_request *areq,
scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
authsize, 0);
- err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
+ err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
if (err)
goto out;
@@ -462,7 +474,7 @@ static int crypto_authenc_verify(struct aead_request *req,
ihash = ohash + authsize;
scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
authsize, 0);
- return memcmp(ihash, ohash, authsize) ? -EBADMSG : 0;
+ return crypto_memneq(ihash, ohash, authsize) ? -EBADMSG : 0;
}
static int crypto_authenc_iverify(struct aead_request *req, u8 *iv,
diff --git a/crypto/authencesn.c b/crypto/authencesn.c
index ab53762fc309..4be0dd4373a9 100644
--- a/crypto/authencesn.c
+++ b/crypto/authencesn.c
@@ -59,37 +59,19 @@ static void authenc_esn_request_complete(struct aead_request *req, int err)
static int crypto_authenc_esn_setkey(struct crypto_aead *authenc_esn, const u8 *key,
unsigned int keylen)
{
- unsigned int authkeylen;
- unsigned int enckeylen;
struct crypto_authenc_esn_ctx *ctx = crypto_aead_ctx(authenc_esn);
struct crypto_ahash *auth = ctx->auth;
struct crypto_ablkcipher *enc = ctx->enc;
- struct rtattr *rta = (void *)key;
- struct crypto_authenc_key_param *param;
+ struct crypto_authenc_keys keys;
int err = -EINVAL;
- if (!RTA_OK(rta, keylen))
+ if (crypto_authenc_extractkeys(&keys, key, keylen) != 0)
goto badkey;
- if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
- goto badkey;
- if (RTA_PAYLOAD(rta) < sizeof(*param))
- goto badkey;
-
- param = RTA_DATA(rta);
- enckeylen = be32_to_cpu(param->enckeylen);
-
- key += RTA_ALIGN(rta->rta_len);
- keylen -= RTA_ALIGN(rta->rta_len);
-
- if (keylen < enckeylen)
- goto badkey;
-
- authkeylen = keylen - enckeylen;
crypto_ahash_clear_flags(auth, CRYPTO_TFM_REQ_MASK);
crypto_ahash_set_flags(auth, crypto_aead_get_flags(authenc_esn) &
CRYPTO_TFM_REQ_MASK);
- err = crypto_ahash_setkey(auth, key, authkeylen);
+ err = crypto_ahash_setkey(auth, keys.authkey, keys.authkeylen);
crypto_aead_set_flags(authenc_esn, crypto_ahash_get_flags(auth) &
CRYPTO_TFM_RES_MASK);
@@ -99,7 +81,7 @@ static int crypto_authenc_esn_setkey(struct crypto_aead *authenc_esn, const u8 *
crypto_ablkcipher_clear_flags(enc, CRYPTO_TFM_REQ_MASK);
crypto_ablkcipher_set_flags(enc, crypto_aead_get_flags(authenc_esn) &
CRYPTO_TFM_REQ_MASK);
- err = crypto_ablkcipher_setkey(enc, key + authkeylen, enckeylen);
+ err = crypto_ablkcipher_setkey(enc, keys.enckey, keys.enckeylen);
crypto_aead_set_flags(authenc_esn, crypto_ablkcipher_get_flags(enc) &
CRYPTO_TFM_RES_MASK);
@@ -247,7 +229,7 @@ static void authenc_esn_verify_ahash_update_done(struct crypto_async_request *ar
scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
authsize, 0);
- err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
+ err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
if (err)
goto out;
@@ -296,7 +278,7 @@ static void authenc_esn_verify_ahash_update_done2(struct crypto_async_request *a
scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
authsize, 0);
- err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
+ err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
if (err)
goto out;
@@ -336,7 +318,7 @@ static void authenc_esn_verify_ahash_done(struct crypto_async_request *areq,
scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
authsize, 0);
- err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
+ err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
if (err)
goto out;
@@ -568,7 +550,7 @@ static int crypto_authenc_esn_verify(struct aead_request *req)
ihash = ohash + authsize;
scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
authsize, 0);
- return memcmp(ihash, ohash, authsize) ? -EBADMSG : 0;
+ return crypto_memneq(ihash, ohash, authsize) ? -EBADMSG : 0;
}
static int crypto_authenc_esn_iverify(struct aead_request *req, u8 *iv,
diff --git a/crypto/ccm.c b/crypto/ccm.c
index 499c91717d93..3e05499d183a 100644
--- a/crypto/ccm.c
+++ b/crypto/ccm.c
@@ -363,7 +363,7 @@ static void crypto_ccm_decrypt_done(struct crypto_async_request *areq,
if (!err) {
err = crypto_ccm_auth(req, req->dst, cryptlen);
- if (!err && memcmp(pctx->auth_tag, pctx->odata, authsize))
+ if (!err && crypto_memneq(pctx->auth_tag, pctx->odata, authsize))
err = -EBADMSG;
}
aead_request_complete(req, err);
@@ -422,7 +422,7 @@ static int crypto_ccm_decrypt(struct aead_request *req)
return err;
/* verify */
- if (memcmp(authtag, odata, authsize))
+ if (crypto_memneq(authtag, odata, authsize))
return -EBADMSG;
return err;
diff --git a/crypto/gcm.c b/crypto/gcm.c
index 43e1fb05ea54..b4f017939004 100644
--- a/crypto/gcm.c
+++ b/crypto/gcm.c
@@ -582,7 +582,7 @@ static int crypto_gcm_verify(struct aead_request *req,
crypto_xor(auth_tag, iauth_tag, 16);
scatterwalk_map_and_copy(iauth_tag, req->src, cryptlen, authsize, 0);
- return memcmp(iauth_tag, auth_tag, authsize) ? -EBADMSG : 0;
+ return crypto_memneq(iauth_tag, auth_tag, authsize) ? -EBADMSG : 0;
}
static void gcm_decrypt_done(struct crypto_async_request *areq, int err)
diff --git a/crypto/memneq.c b/crypto/memneq.c
new file mode 100644
index 000000000000..cd0162221c14
--- /dev/null
+++ b/crypto/memneq.c
@@ -0,0 +1,138 @@
+/*
+ * Constant-time equality testing of memory regions.
+ *
+ * Authors:
+ *
+ * James Yonan <james@openvpn.net>
+ * Daniel Borkmann <dborkman@redhat.com>
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2013 OpenVPN Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2013 OpenVPN Technologies, Inc. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of OpenVPN Technologies nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <crypto/algapi.h>
+
+#ifndef __HAVE_ARCH_CRYPTO_MEMNEQ
+
+/* Generic path for arbitrary size */
+static inline unsigned long
+__crypto_memneq_generic(const void *a, const void *b, size_t size)
+{
+ unsigned long neq = 0;
+
+#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
+ while (size >= sizeof(unsigned long)) {
+ neq |= *(unsigned long *)a ^ *(unsigned long *)b;
+ a += sizeof(unsigned long);
+ b += sizeof(unsigned long);
+ size -= sizeof(unsigned long);
+ }
+#endif /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
+ while (size > 0) {
+ neq |= *(unsigned char *)a ^ *(unsigned char *)b;
+ a += 1;
+ b += 1;
+ size -= 1;
+ }
+ return neq;
+}
+
+/* Loop-free fast-path for frequently used 16-byte size */
+static inline unsigned long __crypto_memneq_16(const void *a, const void *b)
+{
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+ if (sizeof(unsigned long) == 8)
+ return ((*(unsigned long *)(a) ^ *(unsigned long *)(b))
+ | (*(unsigned long *)(a+8) ^ *(unsigned long *)(b+8)));
+ else if (sizeof(unsigned int) == 4)
+ return ((*(unsigned int *)(a) ^ *(unsigned int *)(b))
+ | (*(unsigned int *)(a+4) ^ *(unsigned int *)(b+4))
+ | (*(unsigned int *)(a+8) ^ *(unsigned int *)(b+8))
+ | (*(unsigned int *)(a+12) ^ *(unsigned int *)(b+12)));
+ else
+#endif /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
+ return ((*(unsigned char *)(a) ^ *(unsigned char *)(b))
+ | (*(unsigned char *)(a+1) ^ *(unsigned char *)(b+1))
+ | (*(unsigned char *)(a+2) ^ *(unsigned char *)(b+2))
+ | (*(unsigned char *)(a+3) ^ *(unsigned char *)(b+3))
+ | (*(unsigned char *)(a+4) ^ *(unsigned char *)(b+4))
+ | (*(unsigned char *)(a+5) ^ *(unsigned char *)(b+5))
+ | (*(unsigned char *)(a+6) ^ *(unsigned char *)(b+6))
+ | (*(unsigned char *)(a+7) ^ *(unsigned char *)(b+7))
+ | (*(unsigned char *)(a+8) ^ *(unsigned char *)(b+8))
+ | (*(unsigned char *)(a+9) ^ *(unsigned char *)(b+9))
+ | (*(unsigned char *)(a+10) ^ *(unsigned char *)(b+10))
+ | (*(unsigned char *)(a+11) ^ *(unsigned char *)(b+11))
+ | (*(unsigned char *)(a+12) ^ *(unsigned char *)(b+12))
+ | (*(unsigned char *)(a+13) ^ *(unsigned char *)(b+13))
+ | (*(unsigned char *)(a+14) ^ *(unsigned char *)(b+14))
+ | (*(unsigned char *)(a+15) ^ *(unsigned char *)(b+15)));
+}
+
+/* Compare two areas of memory without leaking timing information,
+ * and with special optimizations for common sizes. Users should
+ * not call this function directly, but should instead use
+ * crypto_memneq defined in crypto/algapi.h.
+ */
+noinline unsigned long __crypto_memneq(const void *a, const void *b,
+ size_t size)
+{
+ switch (size) {
+ case 16:
+ return __crypto_memneq_16(a, b);
+ default:
+ return __crypto_memneq_generic(a, b, size);
+ }
+}
+EXPORT_SYMBOL(__crypto_memneq);
+
+#endif /* __HAVE_ARCH_CRYPTO_MEMNEQ */
diff --git a/drivers/acpi/acpica/acresrc.h b/drivers/acpi/acpica/acresrc.h
index f691d0e4d9fa..ff97430455cb 100644
--- a/drivers/acpi/acpica/acresrc.h
+++ b/drivers/acpi/acpica/acresrc.h
@@ -184,7 +184,7 @@ acpi_rs_create_resource_list(union acpi_operand_object *aml_buffer,
struct acpi_buffer *output_buffer);
acpi_status
-acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer,
+acpi_rs_create_aml_resources(struct acpi_buffer *resource_list,
struct acpi_buffer *output_buffer);
acpi_status
@@ -227,8 +227,8 @@ acpi_rs_get_list_length(u8 * aml_buffer,
u32 aml_buffer_length, acpi_size * size_needed);
acpi_status
-acpi_rs_get_aml_length(struct acpi_resource *linked_list_buffer,
- acpi_size * size_needed);
+acpi_rs_get_aml_length(struct acpi_resource *resource_list,
+ acpi_size resource_list_size, acpi_size * size_needed);
acpi_status
acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,
diff --git a/drivers/acpi/acpica/nsalloc.c b/drivers/acpi/acpica/nsalloc.c
index 243737363fb8..fd1ff54cda19 100644
--- a/drivers/acpi/acpica/nsalloc.c
+++ b/drivers/acpi/acpica/nsalloc.c
@@ -106,6 +106,7 @@ struct acpi_namespace_node *acpi_ns_create_node(u32 name)
void acpi_ns_delete_node(struct acpi_namespace_node *node)
{
union acpi_operand_object *obj_desc;
+ union acpi_operand_object *next_desc;
ACPI_FUNCTION_NAME(ns_delete_node);
@@ -114,12 +115,13 @@ void acpi_ns_delete_node(struct acpi_namespace_node *node)
acpi_ns_detach_object(node);
/*
- * Delete an attached data object if present (an object that was created
- * and attached via acpi_attach_data). Note: After any normal object is
- * detached above, the only possible remaining object is a data object.
+ * Delete an attached data object list if present (objects that were
+ * attached via acpi_attach_data). Note: After any normal object is
+ * detached above, the only possible remaining object(s) are data
+ * objects, in a linked list.
*/
obj_desc = node->object;
- if (obj_desc && (obj_desc->common.type == ACPI_TYPE_LOCAL_DATA)) {
+ while (obj_desc && (obj_desc->common.type == ACPI_TYPE_LOCAL_DATA)) {
/* Invoke the attached data deletion handler if present */
@@ -127,7 +129,15 @@ void acpi_ns_delete_node(struct acpi_namespace_node *node)
obj_desc->data.handler(node, obj_desc->data.pointer);
}
+ next_desc = obj_desc->common.next_object;
acpi_ut_remove_reference(obj_desc);
+ obj_desc = next_desc;
+ }
+
+ /* Special case for the statically allocated root node */
+
+ if (node == acpi_gbl_root_node) {
+ return;
}
/* Now we can delete the node */
diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c
index cc2fea94c5f0..4a0665b6bcc1 100644
--- a/drivers/acpi/acpica/nsutils.c
+++ b/drivers/acpi/acpica/nsutils.c
@@ -593,24 +593,26 @@ struct acpi_namespace_node *acpi_ns_validate_handle(acpi_handle handle)
void acpi_ns_terminate(void)
{
- union acpi_operand_object *obj_desc;
+ acpi_status status;
ACPI_FUNCTION_TRACE(ns_terminate);
/*
- * 1) Free the entire namespace -- all nodes and objects
- *
- * Delete all object descriptors attached to namepsace nodes
+ * Free the entire namespace -- all nodes and all objects
+ * attached to the nodes
*/
acpi_ns_delete_namespace_subtree(acpi_gbl_root_node);
- /* Detach any objects attached to the root */
+ /* Delete any objects attached to the root node */
- obj_desc = acpi_ns_get_attached_object(acpi_gbl_root_node);
- if (obj_desc) {
- acpi_ns_detach_object(acpi_gbl_root_node);
+ status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+ if (ACPI_FAILURE(status)) {
+ return_VOID;
}
+ acpi_ns_delete_node(acpi_gbl_root_node);
+ (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Namespace freed\n"));
return_VOID;
}
diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c
index b62a0f4f4f9b..b60c9cf82862 100644
--- a/drivers/acpi/acpica/rscalc.c
+++ b/drivers/acpi/acpica/rscalc.c
@@ -174,6 +174,7 @@ acpi_rs_stream_option_length(u32 resource_length,
* FUNCTION: acpi_rs_get_aml_length
*
* PARAMETERS: resource - Pointer to the resource linked list
+ * resource_list_size - Size of the resource linked list
* size_needed - Where the required size is returned
*
* RETURN: Status
@@ -185,16 +186,20 @@ acpi_rs_stream_option_length(u32 resource_length,
******************************************************************************/
acpi_status
-acpi_rs_get_aml_length(struct acpi_resource * resource, acpi_size * size_needed)
+acpi_rs_get_aml_length(struct acpi_resource *resource,
+ acpi_size resource_list_size, acpi_size * size_needed)
{
acpi_size aml_size_needed = 0;
+ struct acpi_resource *resource_end;
acpi_rs_length total_size;
ACPI_FUNCTION_TRACE(rs_get_aml_length);
/* Traverse entire list of internal resource descriptors */
- while (resource) {
+ resource_end =
+ ACPI_ADD_PTR(struct acpi_resource, resource, resource_list_size);
+ while (resource < resource_end) {
/* Validate the descriptor type */
diff --git a/drivers/acpi/acpica/rscreate.c b/drivers/acpi/acpica/rscreate.c
index 65f3e1c5b598..3a2ace93e62c 100644
--- a/drivers/acpi/acpica/rscreate.c
+++ b/drivers/acpi/acpica/rscreate.c
@@ -418,22 +418,21 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object,
*
* FUNCTION: acpi_rs_create_aml_resources
*
- * PARAMETERS: linked_list_buffer - Pointer to the resource linked list
- * output_buffer - Pointer to the user's buffer
+ * PARAMETERS: resource_list - Pointer to the resource list buffer
+ * output_buffer - Where the AML buffer is returned
*
* RETURN: Status AE_OK if okay, else a valid acpi_status code.
* If the output_buffer is too small, the error will be
* AE_BUFFER_OVERFLOW and output_buffer->Length will point
* to the size buffer needed.
*
- * DESCRIPTION: Takes the linked list of device resources and
- * creates a bytestream to be used as input for the
- * _SRS control method.
+ * DESCRIPTION: Converts a list of device resources to an AML bytestream
+ * to be used as input for the _SRS control method.
*
******************************************************************************/
acpi_status
-acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer,
+acpi_rs_create_aml_resources(struct acpi_buffer *resource_list,
struct acpi_buffer *output_buffer)
{
acpi_status status;
@@ -441,16 +440,16 @@ acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer,
ACPI_FUNCTION_TRACE(rs_create_aml_resources);
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "LinkedListBuffer = %p\n",
- linked_list_buffer));
+ /* Params already validated, no need to re-validate here */
- /*
- * Params already validated, so we don't re-validate here
- *
- * Pass the linked_list_buffer into a module that calculates
- * the buffer size needed for the byte stream.
- */
- status = acpi_rs_get_aml_length(linked_list_buffer, &aml_size_needed);
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "ResourceList Buffer = %p\n",
+ resource_list->pointer));
+
+ /* Get the buffer size needed for the AML byte stream */
+
+ status = acpi_rs_get_aml_length(resource_list->pointer,
+ resource_list->length,
+ &aml_size_needed);
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "AmlSizeNeeded=%X, %s\n",
(u32)aml_size_needed, acpi_format_exception(status)));
@@ -467,10 +466,9 @@ acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer,
/* Do the conversion */
- status =
- acpi_rs_convert_resources_to_aml(linked_list_buffer,
- aml_size_needed,
- output_buffer->pointer);
+ status = acpi_rs_convert_resources_to_aml(resource_list->pointer,
+ aml_size_needed,
+ output_buffer->pointer);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/acpica/rsutils.c b/drivers/acpi/acpica/rsutils.c
index aef303d56d86..14a7982c9961 100644
--- a/drivers/acpi/acpica/rsutils.c
+++ b/drivers/acpi/acpica/rsutils.c
@@ -753,7 +753,7 @@ acpi_rs_set_srs_method_data(struct acpi_namespace_node *node,
* Convert the linked list into a byte stream
*/
buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
- status = acpi_rs_create_aml_resources(in_buffer->pointer, &buffer);
+ status = acpi_rs_create_aml_resources(in_buffer, &buffer);
if (ACPI_FAILURE(status)) {
goto cleanup;
}
diff --git a/drivers/acpi/acpica/utdebug.c b/drivers/acpi/acpica/utdebug.c
index 1a67b3944b3b..03ae8affe48f 100644
--- a/drivers/acpi/acpica/utdebug.c
+++ b/drivers/acpi/acpica/utdebug.c
@@ -185,6 +185,7 @@ acpi_debug_print(u32 requested_debug_level,
}
acpi_gbl_prev_thread_id = thread_id;
+ acpi_gbl_nesting_level = 0;
}
/*
@@ -193,13 +194,21 @@ acpi_debug_print(u32 requested_debug_level,
*/
acpi_os_printf("%9s-%04ld ", module_name, line_number);
+#ifdef ACPI_EXEC_APP
+ /*
+ * For acpi_exec only, emit the thread ID and nesting level.
+ * Note: nesting level is really only useful during a single-thread
+ * execution. Otherwise, multiple threads will keep resetting the
+ * level.
+ */
if (ACPI_LV_THREADS & acpi_dbg_level) {
acpi_os_printf("[%u] ", (u32)thread_id);
}
- acpi_os_printf("[%02ld] %-22.22s: ",
- acpi_gbl_nesting_level,
- acpi_ut_trim_function_name(function_name));
+ acpi_os_printf("[%02ld] ", acpi_gbl_nesting_level);
+#endif
+
+ acpi_os_printf("%-22.22s: ", acpi_ut_trim_function_name(function_name));
va_start(args, format);
acpi_os_vprintf(format, args);
@@ -420,7 +429,9 @@ acpi_ut_exit(u32 line_number,
component_id, "%s\n", acpi_gbl_fn_exit_str);
}
- acpi_gbl_nesting_level--;
+ if (acpi_gbl_nesting_level) {
+ acpi_gbl_nesting_level--;
+ }
}
ACPI_EXPORT_SYMBOL(acpi_ut_exit)
@@ -467,7 +478,9 @@ acpi_ut_status_exit(u32 line_number,
}
}
- acpi_gbl_nesting_level--;
+ if (acpi_gbl_nesting_level) {
+ acpi_gbl_nesting_level--;
+ }
}
ACPI_EXPORT_SYMBOL(acpi_ut_status_exit)
@@ -504,7 +517,9 @@ acpi_ut_value_exit(u32 line_number,
ACPI_FORMAT_UINT64(value));
}
- acpi_gbl_nesting_level--;
+ if (acpi_gbl_nesting_level) {
+ acpi_gbl_nesting_level--;
+ }
}
ACPI_EXPORT_SYMBOL(acpi_ut_value_exit)
@@ -540,7 +555,9 @@ acpi_ut_ptr_exit(u32 line_number,
ptr);
}
- acpi_gbl_nesting_level--;
+ if (acpi_gbl_nesting_level) {
+ acpi_gbl_nesting_level--;
+ }
}
#endif
diff --git a/drivers/acpi/nvs.c b/drivers/acpi/nvs.c
index 266bc58ce0ce..386a9fe497b4 100644
--- a/drivers/acpi/nvs.c
+++ b/drivers/acpi/nvs.c
@@ -13,7 +13,6 @@
#include <linux/slab.h>
#include <linux/acpi.h>
#include <linux/acpi_io.h>
-#include <acpi/acpiosxf.h>
/* ACPI NVS regions, APEI may use it */
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 0703bff5e60e..20360e480bd8 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -65,6 +65,9 @@ static struct acpi_scan_handler pci_root_handler = {
.ids = root_device_ids,
.attach = acpi_pci_root_add,
.detach = acpi_pci_root_remove,
+ .hotplug = {
+ .ignore = true,
+ },
};
static DEFINE_MUTEX(osc_lock);
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 15daa21fcd05..fd39459926b1 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1772,7 +1772,7 @@ static void acpi_scan_init_hotplug(acpi_handle handle, int type)
*/
list_for_each_entry(hwid, &pnp.ids, list) {
handler = acpi_scan_match_handler(hwid->id, NULL);
- if (handler) {
+ if (handler && !handler->hotplug.ignore) {
acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
acpi_hotplug_notify_cb, handler);
break;
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 14df30580e15..721e949e606e 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -525,7 +525,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state)
* generate wakeup events.
*/
if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) {
- acpi_event_status pwr_btn_status;
+ acpi_event_status pwr_btn_status = ACPI_EVENT_FLAG_DISABLED;
acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status);
diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c
index db5293650f62..6dbc3ca45223 100644
--- a/drivers/acpi/sysfs.c
+++ b/drivers/acpi/sysfs.c
@@ -309,7 +309,7 @@ static void acpi_table_attr_init(struct acpi_table_attr *table_attr,
sprintf(table_attr->name + ACPI_NAME_SIZE, "%d",
table_attr->instance);
- table_attr->attr.size = 0;
+ table_attr->attr.size = table_header->length;
table_attr->attr.read = acpi_table_show;
table_attr->attr.attr.name = table_attr->name;
table_attr->attr.attr.mode = 0400;
@@ -354,8 +354,9 @@ static int acpi_tables_sysfs_init(void)
{
struct acpi_table_attr *table_attr;
struct acpi_table_header *table_header = NULL;
- int table_index = 0;
- int result;
+ int table_index;
+ acpi_status status;
+ int ret;
tables_kobj = kobject_create_and_add("tables", acpi_kobj);
if (!tables_kobj)
@@ -365,33 +366,34 @@ static int acpi_tables_sysfs_init(void)
if (!dynamic_tables_kobj)
goto err_dynamic_tables;
- do {
- result = acpi_get_table_by_index(table_index, &table_header);
- if (!result) {
- table_index++;
- table_attr = NULL;
- table_attr =
- kzalloc(sizeof(struct acpi_table_attr), GFP_KERNEL);
- if (!table_attr)
- return -ENOMEM;
-
- acpi_table_attr_init(table_attr, table_header);
- result =
- sysfs_create_bin_file(tables_kobj,
- &table_attr->attr);
- if (result) {
- kfree(table_attr);
- return result;
- } else
- list_add_tail(&table_attr->node,
- &acpi_table_attr_list);
+ for (table_index = 0;; table_index++) {
+ status = acpi_get_table_by_index(table_index, &table_header);
+
+ if (status == AE_BAD_PARAMETER)
+ break;
+
+ if (ACPI_FAILURE(status))
+ continue;
+
+ table_attr = NULL;
+ table_attr = kzalloc(sizeof(*table_attr), GFP_KERNEL);
+ if (!table_attr)
+ return -ENOMEM;
+
+ acpi_table_attr_init(table_attr, table_header);
+ ret = sysfs_create_bin_file(tables_kobj, &table_attr->attr);
+ if (ret) {
+ kfree(table_attr);
+ return ret;
}
- } while (!result);
+ list_add_tail(&table_attr->node, &acpi_table_attr_list);
+ }
+
kobject_uevent(tables_kobj, KOBJ_ADD);
kobject_uevent(dynamic_tables_kobj, KOBJ_ADD);
- result = acpi_install_table_handler(acpi_sysfs_table_handler, NULL);
+ status = acpi_install_table_handler(acpi_sysfs_table_handler, NULL);
- return result == AE_OK ? 0 : -EINVAL;
+ return ACPI_FAILURE(status) ? -EINVAL : 0;
err_dynamic_tables:
kobject_put(tables_kobj);
err:
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index c206de2951f2..2f2b08457c67 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -165,6 +165,19 @@ config HW_RANDOM_OMAP
If unsure, say Y.
+config HW_RANDOM_OMAP3_ROM
+ tristate "OMAP3 ROM Random Number Generator support"
+ depends on HW_RANDOM && ARCH_OMAP3
+ default HW_RANDOM
+ ---help---
+ This driver provides kernel-side support for the Random Number
+ Generator hardware found on OMAP34xx processors.
+
+ To compile this driver as a module, choose M here: the
+ module will be called omap3-rom-rng.
+
+ If unsure, say Y.
+
config HW_RANDOM_OCTEON
tristate "Octeon Random Number Generator support"
depends on HW_RANDOM && CAVIUM_OCTEON_SOC
@@ -327,3 +340,15 @@ config HW_RANDOM_TPM
module will be called tpm-rng.
If unsure, say Y.
+
+config HW_RANDOM_MSM
+ tristate "Qualcomm MSM Random Number Generator support"
+ depends on HW_RANDOM && ARCH_MSM
+ ---help---
+ This driver provides kernel-side support for the Random Number
+ Generator hardware found on Qualcomm MSM SoCs.
+
+ To compile this driver as a module, choose M here. the
+ module will be called msm-rng.
+
+ If unsure, say Y.
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index d7d2435ff7fa..3ae7755a52e7 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -15,6 +15,7 @@ n2-rng-y := n2-drv.o n2-asm.o
obj-$(CONFIG_HW_RANDOM_VIA) += via-rng.o
obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx-rng.o
obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
+obj-$(CONFIG_HW_RANDOM_OMAP3_ROM) += omap3-rom-rng.o
obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
obj-$(CONFIG_HW_RANDOM_TX4939) += tx4939-rng.o
@@ -28,3 +29,4 @@ obj-$(CONFIG_HW_RANDOM_POWERNV) += powernv-rng.o
obj-$(CONFIG_HW_RANDOM_EXYNOS) += exynos-rng.o
obj-$(CONFIG_HW_RANDOM_TPM) += tpm-rng.o
obj-$(CONFIG_HW_RANDOM_BCM2835) += bcm2835-rng.o
+obj-$(CONFIG_HW_RANDOM_MSM) += msm-rng.o
diff --git a/drivers/char/hw_random/msm-rng.c b/drivers/char/hw_random/msm-rng.c
new file mode 100644
index 000000000000..148521e51dc6
--- /dev/null
+++ b/drivers/char/hw_random/msm-rng.c
@@ -0,0 +1,197 @@
+/*
+ * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+/* Device specific register offsets */
+#define PRNG_DATA_OUT 0x0000
+#define PRNG_STATUS 0x0004
+#define PRNG_LFSR_CFG 0x0100
+#define PRNG_CONFIG 0x0104
+
+/* Device specific register masks and config values */
+#define PRNG_LFSR_CFG_MASK 0x0000ffff
+#define PRNG_LFSR_CFG_CLOCKS 0x0000dddd
+#define PRNG_CONFIG_HW_ENABLE BIT(1)
+#define PRNG_STATUS_DATA_AVAIL BIT(0)
+
+#define MAX_HW_FIFO_DEPTH 16
+#define MAX_HW_FIFO_SIZE (MAX_HW_FIFO_DEPTH * 4)
+#define WORD_SZ 4
+
+struct msm_rng {
+ void __iomem *base;
+ struct clk *clk;
+ struct hwrng hwrng;
+};
+
+#define to_msm_rng(p) container_of(p, struct msm_rng, hwrng)
+
+static int msm_rng_enable(struct hwrng *hwrng, int enable)
+{
+ struct msm_rng *rng = to_msm_rng(hwrng);
+ u32 val;
+ int ret;
+
+ ret = clk_prepare_enable(rng->clk);
+ if (ret)
+ return ret;
+
+ if (enable) {
+ /* Enable PRNG only if it is not already enabled */
+ val = readl_relaxed(rng->base + PRNG_CONFIG);
+ if (val & PRNG_CONFIG_HW_ENABLE)
+ goto already_enabled;
+
+ val = readl_relaxed(rng->base + PRNG_LFSR_CFG);
+ val &= ~PRNG_LFSR_CFG_MASK;
+ val |= PRNG_LFSR_CFG_CLOCKS;
+ writel(val, rng->base + PRNG_LFSR_CFG);
+
+ val = readl_relaxed(rng->base + PRNG_CONFIG);
+ val |= PRNG_CONFIG_HW_ENABLE;
+ writel(val, rng->base + PRNG_CONFIG);
+ } else {
+ val = readl_relaxed(rng->base + PRNG_CONFIG);
+ val &= ~PRNG_CONFIG_HW_ENABLE;
+ writel(val, rng->base + PRNG_CONFIG);
+ }
+
+already_enabled:
+ clk_disable_unprepare(rng->clk);
+ return 0;
+}
+
+static int msm_rng_read(struct hwrng *hwrng, void *data, size_t max, bool wait)
+{
+ struct msm_rng *rng = to_msm_rng(hwrng);
+ size_t currsize = 0;
+ u32 *retdata = data;
+ size_t maxsize;
+ int ret;
+ u32 val;
+
+ /* calculate max size bytes to transfer back to caller */
+ maxsize = min_t(size_t, MAX_HW_FIFO_SIZE, max);
+
+ /* no room for word data */
+ if (maxsize < WORD_SZ)
+ return 0;
+
+ ret = clk_prepare_enable(rng->clk);
+ if (ret)
+ return ret;
+
+ /* read random data from hardware */
+ do {
+ val = readl_relaxed(rng->base + PRNG_STATUS);
+ if (!(val & PRNG_STATUS_DATA_AVAIL))
+ break;
+
+ val = readl_relaxed(rng->base + PRNG_DATA_OUT);
+ if (!val)
+ break;
+
+ *retdata++ = val;
+ currsize += WORD_SZ;
+
+ /* make sure we stay on 32bit boundary */
+ if ((maxsize - currsize) < WORD_SZ)
+ break;
+ } while (currsize < maxsize);
+
+ clk_disable_unprepare(rng->clk);
+
+ return currsize;
+}
+
+static int msm_rng_init(struct hwrng *hwrng)
+{
+ return msm_rng_enable(hwrng, 1);
+}
+
+static void msm_rng_cleanup(struct hwrng *hwrng)
+{
+ msm_rng_enable(hwrng, 0);
+}
+
+static int msm_rng_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct msm_rng *rng;
+ int ret;
+
+ rng = devm_kzalloc(&pdev->dev, sizeof(*rng), GFP_KERNEL);
+ if (!rng)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, rng);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ rng->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(rng->base))
+ return PTR_ERR(rng->base);
+
+ rng->clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(rng->clk))
+ return PTR_ERR(rng->clk);
+
+ rng->hwrng.name = KBUILD_MODNAME,
+ rng->hwrng.init = msm_rng_init,
+ rng->hwrng.cleanup = msm_rng_cleanup,
+ rng->hwrng.read = msm_rng_read,
+
+ ret = hwrng_register(&rng->hwrng);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register hwrng\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int msm_rng_remove(struct platform_device *pdev)
+{
+ struct msm_rng *rng = platform_get_drvdata(pdev);
+
+ hwrng_unregister(&rng->hwrng);
+ return 0;
+}
+
+static const struct of_device_id msm_rng_of_match[] = {
+ { .compatible = "qcom,prng", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, msm_rng_of_match);
+
+static struct platform_driver msm_rng_driver = {
+ .probe = msm_rng_probe,
+ .remove = msm_rng_remove,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(msm_rng_of_match),
+ }
+};
+module_platform_driver(msm_rng_driver);
+
+MODULE_ALIAS("platform:" KBUILD_MODNAME);
+MODULE_AUTHOR("The Linux Foundation");
+MODULE_DESCRIPTION("Qualcomm MSM random number generator driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/char/hw_random/omap3-rom-rng.c b/drivers/char/hw_random/omap3-rom-rng.c
new file mode 100644
index 000000000000..c853e9e68573
--- /dev/null
+++ b/drivers/char/hw_random/omap3-rom-rng.c
@@ -0,0 +1,141 @@
+/*
+ * omap3-rom-rng.c - RNG driver for TI OMAP3 CPU family
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Juha Yrjola <juha.yrjola@solidboot.com>
+ *
+ * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/random.h>
+#include <linux/hw_random.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#define RNG_RESET 0x01
+#define RNG_GEN_PRNG_HW_INIT 0x02
+#define RNG_GEN_HW 0x08
+
+/* param1: ptr, param2: count, param3: flag */
+static u32 (*omap3_rom_rng_call)(u32, u32, u32);
+
+static struct timer_list idle_timer;
+static int rng_idle;
+static struct clk *rng_clk;
+
+static void omap3_rom_rng_idle(unsigned long data)
+{
+ int r;
+
+ r = omap3_rom_rng_call(0, 0, RNG_RESET);
+ if (r != 0) {
+ pr_err("reset failed: %d\n", r);
+ return;
+ }
+ clk_disable_unprepare(rng_clk);
+ rng_idle = 1;
+}
+
+static int omap3_rom_rng_get_random(void *buf, unsigned int count)
+{
+ u32 r;
+ u32 ptr;
+
+ del_timer_sync(&idle_timer);
+ if (rng_idle) {
+ clk_prepare_enable(rng_clk);
+ r = omap3_rom_rng_call(0, 0, RNG_GEN_PRNG_HW_INIT);
+ if (r != 0) {
+ clk_disable_unprepare(rng_clk);
+ pr_err("HW init failed: %d\n", r);
+ return -EIO;
+ }
+ rng_idle = 0;
+ }
+
+ ptr = virt_to_phys(buf);
+ r = omap3_rom_rng_call(ptr, count, RNG_GEN_HW);
+ mod_timer(&idle_timer, jiffies + msecs_to_jiffies(500));
+ if (r != 0)
+ return -EINVAL;
+ return 0;
+}
+
+static int omap3_rom_rng_data_present(struct hwrng *rng, int wait)
+{
+ return 1;
+}
+
+static int omap3_rom_rng_data_read(struct hwrng *rng, u32 *data)
+{
+ int r;
+
+ r = omap3_rom_rng_get_random(data, 4);
+ if (r < 0)
+ return r;
+ return 4;
+}
+
+static struct hwrng omap3_rom_rng_ops = {
+ .name = "omap3-rom",
+ .data_present = omap3_rom_rng_data_present,
+ .data_read = omap3_rom_rng_data_read,
+};
+
+static int omap3_rom_rng_probe(struct platform_device *pdev)
+{
+ pr_info("initializing\n");
+
+ omap3_rom_rng_call = pdev->dev.platform_data;
+ if (!omap3_rom_rng_call) {
+ pr_err("omap3_rom_rng_call is NULL\n");
+ return -EINVAL;
+ }
+
+ setup_timer(&idle_timer, omap3_rom_rng_idle, 0);
+ rng_clk = clk_get(&pdev->dev, "ick");
+ if (IS_ERR(rng_clk)) {
+ pr_err("unable to get RNG clock\n");
+ return PTR_ERR(rng_clk);
+ }
+
+ /* Leave the RNG in reset state. */
+ clk_prepare_enable(rng_clk);
+ omap3_rom_rng_idle(0);
+
+ return hwrng_register(&omap3_rom_rng_ops);
+}
+
+static int omap3_rom_rng_remove(struct platform_device *pdev)
+{
+ hwrng_unregister(&omap3_rom_rng_ops);
+ clk_disable_unprepare(rng_clk);
+ clk_put(rng_clk);
+ return 0;
+}
+
+static struct platform_driver omap3_rom_rng_driver = {
+ .driver = {
+ .name = "omap3-rom-rng",
+ .owner = THIS_MODULE,
+ },
+ .probe = omap3_rom_rng_probe,
+ .remove = omap3_rom_rng_remove,
+};
+
+module_platform_driver(omap3_rom_rng_driver);
+
+MODULE_ALIAS("platform:omap3-rom-rng");
+MODULE_AUTHOR("Juha Yrjola");
+MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/hw_random/pseries-rng.c b/drivers/char/hw_random/pseries-rng.c
index b761459a3436..ab7ffdec0ec3 100644
--- a/drivers/char/hw_random/pseries-rng.c
+++ b/drivers/char/hw_random/pseries-rng.c
@@ -24,7 +24,6 @@
#include <linux/hw_random.h>
#include <asm/vio.h>
-#define MODULE_NAME "pseries-rng"
static int pseries_rng_data_read(struct hwrng *rng, u32 *data)
{
@@ -55,7 +54,7 @@ static unsigned long pseries_rng_get_desired_dma(struct vio_dev *vdev)
};
static struct hwrng pseries_rng = {
- .name = MODULE_NAME,
+ .name = KBUILD_MODNAME,
.data_read = pseries_rng_data_read,
};
@@ -78,7 +77,7 @@ static struct vio_device_id pseries_rng_driver_ids[] = {
MODULE_DEVICE_TABLE(vio, pseries_rng_driver_ids);
static struct vio_driver pseries_rng_driver = {
- .name = MODULE_NAME,
+ .name = KBUILD_MODNAME,
.probe = pseries_rng_probe,
.remove = pseries_rng_remove,
.get_desired_dma = pseries_rng_get_desired_dma,
diff --git a/drivers/char/hw_random/via-rng.c b/drivers/char/hw_random/via-rng.c
index e737772ad69a..de5a6dcfb3e2 100644
--- a/drivers/char/hw_random/via-rng.c
+++ b/drivers/char/hw_random/via-rng.c
@@ -221,7 +221,7 @@ static void __exit mod_exit(void)
module_init(mod_init);
module_exit(mod_exit);
-static struct x86_cpu_id via_rng_cpu_id[] = {
+static struct x86_cpu_id __maybe_unused via_rng_cpu_id[] = {
X86_FEATURE_MATCH(X86_FEATURE_XSTORE),
{}
};
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
index f2c75065ce19..dfd1643b0b2f 100644
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ b/drivers/cpufreq/exynos4210-cpufreq.c
@@ -157,4 +157,3 @@ err_moutcore:
pr_debug("%s: failed initialization\n", __func__);
return -EINVAL;
}
-EXPORT_SYMBOL(exynos4210_cpufreq_init);
diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c
index 8683304ce62c..efad5e657f6f 100644
--- a/drivers/cpufreq/exynos4x12-cpufreq.c
+++ b/drivers/cpufreq/exynos4x12-cpufreq.c
@@ -211,4 +211,3 @@ err_moutcore:
pr_debug("%s: failed initialization\n", __func__);
return -EINVAL;
}
-EXPORT_SYMBOL(exynos4x12_cpufreq_init);
diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c
index 9fae466d7746..8feda86fe42c 100644
--- a/drivers/cpufreq/exynos5250-cpufreq.c
+++ b/drivers/cpufreq/exynos5250-cpufreq.c
@@ -236,4 +236,3 @@ err_moutcore:
pr_err("%s: failed initialization\n", __func__);
return -EINVAL;
}
-EXPORT_SYMBOL(exynos5250_cpufreq_init);
diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c
index f42df7ec03c5..b7309c37033d 100644
--- a/drivers/cpufreq/tegra-cpufreq.c
+++ b/drivers/cpufreq/tegra-cpufreq.c
@@ -142,10 +142,8 @@ static int tegra_target(struct cpufreq_policy *policy, unsigned int index)
mutex_lock(&tegra_cpu_lock);
- if (is_suspended) {
- ret = -EBUSY;
+ if (is_suspended)
goto out;
- }
freq = freq_table[index].frequency;
diff --git a/drivers/crypto/caam/Kconfig b/drivers/crypto/caam/Kconfig
index ca89f6b84b06..e7555ff4cafd 100644
--- a/drivers/crypto/caam/Kconfig
+++ b/drivers/crypto/caam/Kconfig
@@ -4,16 +4,29 @@ config CRYPTO_DEV_FSL_CAAM
help
Enables the driver module for Freescale's Cryptographic Accelerator
and Assurance Module (CAAM), also known as the SEC version 4 (SEC4).
- This module adds a job ring operation interface, and configures h/w
+ This module creates job ring devices, and configures h/w
to operate as a DPAA component automatically, depending
on h/w feature availability.
To compile this driver as a module, choose M here: the module
will be called caam.
+config CRYPTO_DEV_FSL_CAAM_JR
+ tristate "Freescale CAAM Job Ring driver backend"
+ depends on CRYPTO_DEV_FSL_CAAM
+ default y
+ help
+ Enables the driver module for Job Rings which are part of
+ Freescale's Cryptographic Accelerator
+ and Assurance Module (CAAM). This module adds a job ring operation
+ interface.
+
+ To compile this driver as a module, choose M here: the module
+ will be called caam_jr.
+
config CRYPTO_DEV_FSL_CAAM_RINGSIZE
int "Job Ring size"
- depends on CRYPTO_DEV_FSL_CAAM
+ depends on CRYPTO_DEV_FSL_CAAM_JR
range 2 9
default "9"
help
@@ -31,7 +44,7 @@ config CRYPTO_DEV_FSL_CAAM_RINGSIZE
config CRYPTO_DEV_FSL_CAAM_INTC
bool "Job Ring interrupt coalescing"
- depends on CRYPTO_DEV_FSL_CAAM
+ depends on CRYPTO_DEV_FSL_CAAM_JR
default n
help
Enable the Job Ring's interrupt coalescing feature.
@@ -62,7 +75,7 @@ config CRYPTO_DEV_FSL_CAAM_INTC_TIME_THLD
config CRYPTO_DEV_FSL_CAAM_CRYPTO_API
tristate "Register algorithm implementations with the Crypto API"
- depends on CRYPTO_DEV_FSL_CAAM
+ depends on CRYPTO_DEV_FSL_CAAM && CRYPTO_DEV_FSL_CAAM_JR
default y
select CRYPTO_ALGAPI
select CRYPTO_AUTHENC
@@ -76,7 +89,7 @@ config CRYPTO_DEV_FSL_CAAM_CRYPTO_API
config CRYPTO_DEV_FSL_CAAM_AHASH_API
tristate "Register hash algorithm implementations with Crypto API"
- depends on CRYPTO_DEV_FSL_CAAM
+ depends on CRYPTO_DEV_FSL_CAAM && CRYPTO_DEV_FSL_CAAM_JR
default y
select CRYPTO_HASH
help
@@ -88,7 +101,7 @@ config CRYPTO_DEV_FSL_CAAM_AHASH_API
config CRYPTO_DEV_FSL_CAAM_RNG_API
tristate "Register caam device for hwrng API"
- depends on CRYPTO_DEV_FSL_CAAM
+ depends on CRYPTO_DEV_FSL_CAAM && CRYPTO_DEV_FSL_CAAM_JR
default y
select CRYPTO_RNG
select HW_RANDOM
diff --git a/drivers/crypto/caam/Makefile b/drivers/crypto/caam/Makefile
index d56bd0ec65d8..550758a333e7 100644
--- a/drivers/crypto/caam/Makefile
+++ b/drivers/crypto/caam/Makefile
@@ -6,8 +6,10 @@ ifeq ($(CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG), y)
endif
obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM) += caam.o
+obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_JR) += caam_jr.o
obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API) += caamalg.o
obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API) += caamhash.o
obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API) += caamrng.o
-caam-objs := ctrl.o jr.o error.o key_gen.o
+caam-objs := ctrl.o
+caam_jr-objs := jr.o key_gen.o error.o
diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c
index 7c63b72ecd75..4f44b71b9e24 100644
--- a/drivers/crypto/caam/caamalg.c
+++ b/drivers/crypto/caam/caamalg.c
@@ -86,6 +86,7 @@
#else
#define debug(format, arg...)
#endif
+static struct list_head alg_list;
/* Set DK bit in class 1 operation if shared */
static inline void append_dec_op1(u32 *desc, u32 type)
@@ -2057,7 +2058,6 @@ static struct caam_alg_template driver_algs[] = {
struct caam_crypto_alg {
struct list_head entry;
- struct device *ctrldev;
int class1_alg_type;
int class2_alg_type;
int alg_op;
@@ -2070,14 +2070,12 @@ static int caam_cra_init(struct crypto_tfm *tfm)
struct caam_crypto_alg *caam_alg =
container_of(alg, struct caam_crypto_alg, crypto_alg);
struct caam_ctx *ctx = crypto_tfm_ctx(tfm);
- struct caam_drv_private *priv = dev_get_drvdata(caam_alg->ctrldev);
- int tgt_jr = atomic_inc_return(&priv->tfm_count);
- /*
- * distribute tfms across job rings to ensure in-order
- * crypto request processing per tfm
- */
- ctx->jrdev = priv->jrdev[(tgt_jr / 2) % priv->total_jobrs];
+ ctx->jrdev = caam_jr_alloc();
+ if (IS_ERR(ctx->jrdev)) {
+ pr_err("Job Ring Device allocation for transform failed\n");
+ return PTR_ERR(ctx->jrdev);
+ }
/* copy descriptor header template value */
ctx->class1_alg_type = OP_TYPE_CLASS1_ALG | caam_alg->class1_alg_type;
@@ -2104,44 +2102,26 @@ static void caam_cra_exit(struct crypto_tfm *tfm)
dma_unmap_single(ctx->jrdev, ctx->sh_desc_givenc_dma,
desc_bytes(ctx->sh_desc_givenc),
DMA_TO_DEVICE);
+
+ caam_jr_free(ctx->jrdev);
}
static void __exit caam_algapi_exit(void)
{
- struct device_node *dev_node;
- struct platform_device *pdev;
- struct device *ctrldev;
- struct caam_drv_private *priv;
struct caam_crypto_alg *t_alg, *n;
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
- if (!dev_node) {
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
- if (!dev_node)
- return;
- }
-
- pdev = of_find_device_by_node(dev_node);
- if (!pdev)
- return;
-
- ctrldev = &pdev->dev;
- of_node_put(dev_node);
- priv = dev_get_drvdata(ctrldev);
-
- if (!priv->alg_list.next)
+ if (!alg_list.next)
return;
- list_for_each_entry_safe(t_alg, n, &priv->alg_list, entry) {
+ list_for_each_entry_safe(t_alg, n, &alg_list, entry) {
crypto_unregister_alg(&t_alg->crypto_alg);
list_del(&t_alg->entry);
kfree(t_alg);
}
}
-static struct caam_crypto_alg *caam_alg_alloc(struct device *ctrldev,
- struct caam_alg_template
+static struct caam_crypto_alg *caam_alg_alloc(struct caam_alg_template
*template)
{
struct caam_crypto_alg *t_alg;
@@ -2149,7 +2129,7 @@ static struct caam_crypto_alg *caam_alg_alloc(struct device *ctrldev,
t_alg = kzalloc(sizeof(struct caam_crypto_alg), GFP_KERNEL);
if (!t_alg) {
- dev_err(ctrldev, "failed to allocate t_alg\n");
+ pr_err("failed to allocate t_alg\n");
return ERR_PTR(-ENOMEM);
}
@@ -2181,62 +2161,39 @@ static struct caam_crypto_alg *caam_alg_alloc(struct device *ctrldev,
t_alg->class1_alg_type = template->class1_alg_type;
t_alg->class2_alg_type = template->class2_alg_type;
t_alg->alg_op = template->alg_op;
- t_alg->ctrldev = ctrldev;
return t_alg;
}
static int __init caam_algapi_init(void)
{
- struct device_node *dev_node;
- struct platform_device *pdev;
- struct device *ctrldev;
- struct caam_drv_private *priv;
int i = 0, err = 0;
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
- if (!dev_node) {
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
- if (!dev_node)
- return -ENODEV;
- }
-
- pdev = of_find_device_by_node(dev_node);
- if (!pdev)
- return -ENODEV;
-
- ctrldev = &pdev->dev;
- priv = dev_get_drvdata(ctrldev);
- of_node_put(dev_node);
-
- INIT_LIST_HEAD(&priv->alg_list);
-
- atomic_set(&priv->tfm_count, -1);
+ INIT_LIST_HEAD(&alg_list);
/* register crypto algorithms the device supports */
for (i = 0; i < ARRAY_SIZE(driver_algs); i++) {
/* TODO: check if h/w supports alg */
struct caam_crypto_alg *t_alg;
- t_alg = caam_alg_alloc(ctrldev, &driver_algs[i]);
+ t_alg = caam_alg_alloc(&driver_algs[i]);
if (IS_ERR(t_alg)) {
err = PTR_ERR(t_alg);
- dev_warn(ctrldev, "%s alg allocation failed\n",
- driver_algs[i].driver_name);
+ pr_warn("%s alg allocation failed\n",
+ driver_algs[i].driver_name);
continue;
}
err = crypto_register_alg(&t_alg->crypto_alg);
if (err) {
- dev_warn(ctrldev, "%s alg registration failed\n",
+ pr_warn("%s alg registration failed\n",
t_alg->crypto_alg.cra_driver_name);
kfree(t_alg);
} else
- list_add_tail(&t_alg->entry, &priv->alg_list);
+ list_add_tail(&t_alg->entry, &alg_list);
}
- if (!list_empty(&priv->alg_list))
- dev_info(ctrldev, "%s algorithms registered in /proc/crypto\n",
- (char *)of_get_property(dev_node, "compatible", NULL));
+ if (!list_empty(&alg_list))
+ pr_info("caam algorithms registered in /proc/crypto\n");
return err;
}
diff --git a/drivers/crypto/caam/caamhash.c b/drivers/crypto/caam/caamhash.c
index e732bd962e98..0378328f47a7 100644
--- a/drivers/crypto/caam/caamhash.c
+++ b/drivers/crypto/caam/caamhash.c
@@ -94,6 +94,9 @@
#define debug(format, arg...)
#endif
+
+static struct list_head hash_list;
+
/* ahash per-session context */
struct caam_hash_ctx {
struct device *jrdev;
@@ -1653,7 +1656,6 @@ static struct caam_hash_template driver_hash[] = {
struct caam_hash_alg {
struct list_head entry;
- struct device *ctrldev;
int alg_type;
int alg_op;
struct ahash_alg ahash_alg;
@@ -1670,7 +1672,6 @@ static int caam_hash_cra_init(struct crypto_tfm *tfm)
struct caam_hash_alg *caam_hash =
container_of(alg, struct caam_hash_alg, ahash_alg);
struct caam_hash_ctx *ctx = crypto_tfm_ctx(tfm);
- struct caam_drv_private *priv = dev_get_drvdata(caam_hash->ctrldev);
/* Sizes for MDHA running digests: MD5, SHA1, 224, 256, 384, 512 */
static const u8 runninglen[] = { HASH_MSG_LEN + MD5_DIGEST_SIZE,
HASH_MSG_LEN + SHA1_DIGEST_SIZE,
@@ -1678,15 +1679,17 @@ static int caam_hash_cra_init(struct crypto_tfm *tfm)
HASH_MSG_LEN + SHA256_DIGEST_SIZE,
HASH_MSG_LEN + 64,
HASH_MSG_LEN + SHA512_DIGEST_SIZE };
- int tgt_jr = atomic_inc_return(&priv->tfm_count);
int ret = 0;
/*
- * distribute tfms across job rings to ensure in-order
+ * Get a Job ring from Job Ring driver to ensure in-order
* crypto request processing per tfm
*/
- ctx->jrdev = priv->jrdev[tgt_jr % priv->total_jobrs];
-
+ ctx->jrdev = caam_jr_alloc();
+ if (IS_ERR(ctx->jrdev)) {
+ pr_err("Job Ring Device allocation for transform failed\n");
+ return PTR_ERR(ctx->jrdev);
+ }
/* copy descriptor header template value */
ctx->alg_type = OP_TYPE_CLASS2_ALG | caam_hash->alg_type;
ctx->alg_op = OP_TYPE_CLASS2_ALG | caam_hash->alg_op;
@@ -1729,35 +1732,18 @@ static void caam_hash_cra_exit(struct crypto_tfm *tfm)
!dma_mapping_error(ctx->jrdev, ctx->sh_desc_finup_dma))
dma_unmap_single(ctx->jrdev, ctx->sh_desc_finup_dma,
desc_bytes(ctx->sh_desc_finup), DMA_TO_DEVICE);
+
+ caam_jr_free(ctx->jrdev);
}
static void __exit caam_algapi_hash_exit(void)
{
- struct device_node *dev_node;
- struct platform_device *pdev;
- struct device *ctrldev;
- struct caam_drv_private *priv;
struct caam_hash_alg *t_alg, *n;
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
- if (!dev_node) {
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
- if (!dev_node)
- return;
- }
-
- pdev = of_find_device_by_node(dev_node);
- if (!pdev)
+ if (!hash_list.next)
return;
- ctrldev = &pdev->dev;
- of_node_put(dev_node);
- priv = dev_get_drvdata(ctrldev);
-
- if (!priv->hash_list.next)
- return;
-
- list_for_each_entry_safe(t_alg, n, &priv->hash_list, entry) {
+ list_for_each_entry_safe(t_alg, n, &hash_list, entry) {
crypto_unregister_ahash(&t_alg->ahash_alg);
list_del(&t_alg->entry);
kfree(t_alg);
@@ -1765,7 +1751,7 @@ static void __exit caam_algapi_hash_exit(void)
}
static struct caam_hash_alg *
-caam_hash_alloc(struct device *ctrldev, struct caam_hash_template *template,
+caam_hash_alloc(struct caam_hash_template *template,
bool keyed)
{
struct caam_hash_alg *t_alg;
@@ -1774,7 +1760,7 @@ caam_hash_alloc(struct device *ctrldev, struct caam_hash_template *template,
t_alg = kzalloc(sizeof(struct caam_hash_alg), GFP_KERNEL);
if (!t_alg) {
- dev_err(ctrldev, "failed to allocate t_alg\n");
+ pr_err("failed to allocate t_alg\n");
return ERR_PTR(-ENOMEM);
}
@@ -1805,37 +1791,15 @@ caam_hash_alloc(struct device *ctrldev, struct caam_hash_template *template,
t_alg->alg_type = template->alg_type;
t_alg->alg_op = template->alg_op;
- t_alg->ctrldev = ctrldev;
return t_alg;
}
static int __init caam_algapi_hash_init(void)
{
- struct device_node *dev_node;
- struct platform_device *pdev;
- struct device *ctrldev;
- struct caam_drv_private *priv;
int i = 0, err = 0;
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
- if (!dev_node) {
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
- if (!dev_node)
- return -ENODEV;
- }
-
- pdev = of_find_device_by_node(dev_node);
- if (!pdev)
- return -ENODEV;
-
- ctrldev = &pdev->dev;
- priv = dev_get_drvdata(ctrldev);
- of_node_put(dev_node);
-
- INIT_LIST_HEAD(&priv->hash_list);
-
- atomic_set(&priv->tfm_count, -1);
+ INIT_LIST_HEAD(&hash_list);
/* register crypto algorithms the device supports */
for (i = 0; i < ARRAY_SIZE(driver_hash); i++) {
@@ -1843,38 +1807,38 @@ static int __init caam_algapi_hash_init(void)
struct caam_hash_alg *t_alg;
/* register hmac version */
- t_alg = caam_hash_alloc(ctrldev, &driver_hash[i], true);
+ t_alg = caam_hash_alloc(&driver_hash[i], true);
if (IS_ERR(t_alg)) {
err = PTR_ERR(t_alg);
- dev_warn(ctrldev, "%s alg allocation failed\n",
- driver_hash[i].driver_name);
+ pr_warn("%s alg allocation failed\n",
+ driver_hash[i].driver_name);
continue;
}
err = crypto_register_ahash(&t_alg->ahash_alg);
if (err) {
- dev_warn(ctrldev, "%s alg registration failed\n",
+ pr_warn("%s alg registration failed\n",
t_alg->ahash_alg.halg.base.cra_driver_name);
kfree(t_alg);
} else
- list_add_tail(&t_alg->entry, &priv->hash_list);
+ list_add_tail(&t_alg->entry, &hash_list);
/* register unkeyed version */
- t_alg = caam_hash_alloc(ctrldev, &driver_hash[i], false);
+ t_alg = caam_hash_alloc(&driver_hash[i], false);
if (IS_ERR(t_alg)) {
err = PTR_ERR(t_alg);
- dev_warn(ctrldev, "%s alg allocation failed\n",
- driver_hash[i].driver_name);
+ pr_warn("%s alg allocation failed\n",
+ driver_hash[i].driver_name);
continue;
}
err = crypto_register_ahash(&t_alg->ahash_alg);
if (err) {
- dev_warn(ctrldev, "%s alg registration failed\n",
+ pr_warn("%s alg registration failed\n",
t_alg->ahash_alg.halg.base.cra_driver_name);
kfree(t_alg);
} else
- list_add_tail(&t_alg->entry, &priv->hash_list);
+ list_add_tail(&t_alg->entry, &hash_list);
}
return err;
diff --git a/drivers/crypto/caam/caamrng.c b/drivers/crypto/caam/caamrng.c
index d1939a9539c0..28486b19fc36 100644
--- a/drivers/crypto/caam/caamrng.c
+++ b/drivers/crypto/caam/caamrng.c
@@ -273,34 +273,23 @@ static struct hwrng caam_rng = {
static void __exit caam_rng_exit(void)
{
+ caam_jr_free(rng_ctx.jrdev);
hwrng_unregister(&caam_rng);
}
static int __init caam_rng_init(void)
{
- struct device_node *dev_node;
- struct platform_device *pdev;
- struct device *ctrldev;
- struct caam_drv_private *priv;
-
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
- if (!dev_node) {
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
- if (!dev_node)
- return -ENODEV;
- }
-
- pdev = of_find_device_by_node(dev_node);
- if (!pdev)
- return -ENODEV;
+ struct device *dev;
- ctrldev = &pdev->dev;
- priv = dev_get_drvdata(ctrldev);
- of_node_put(dev_node);
+ dev = caam_jr_alloc();
+ if (IS_ERR(dev)) {
+ pr_err("Job Ring Device allocation for transform failed\n");
+ return PTR_ERR(dev);
+ }
- caam_init_rng(&rng_ctx, priv->jrdev[0]);
+ caam_init_rng(&rng_ctx, dev);
- dev_info(priv->jrdev[0], "registering rng-caam\n");
+ dev_info(dev, "registering rng-caam\n");
return hwrng_register(&caam_rng);
}
diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c
index bc6d820812b6..63fb1af2c431 100644
--- a/drivers/crypto/caam/ctrl.c
+++ b/drivers/crypto/caam/ctrl.c
@@ -16,82 +16,75 @@
#include "error.h"
#include "ctrl.h"
-static int caam_remove(struct platform_device *pdev)
-{
- struct device *ctrldev;
- struct caam_drv_private *ctrlpriv;
- struct caam_drv_private_jr *jrpriv;
- struct caam_full __iomem *topregs;
- int ring, ret = 0;
-
- ctrldev = &pdev->dev;
- ctrlpriv = dev_get_drvdata(ctrldev);
- topregs = (struct caam_full __iomem *)ctrlpriv->ctrl;
-
- /* shut down JobRs */
- for (ring = 0; ring < ctrlpriv->total_jobrs; ring++) {
- ret |= caam_jr_shutdown(ctrlpriv->jrdev[ring]);
- jrpriv = dev_get_drvdata(ctrlpriv->jrdev[ring]);
- irq_dispose_mapping(jrpriv->irq);
- }
-
- /* Shut down debug views */
-#ifdef CONFIG_DEBUG_FS
- debugfs_remove_recursive(ctrlpriv->dfs_root);
-#endif
-
- /* Unmap controller region */
- iounmap(&topregs->ctrl);
-
- kfree(ctrlpriv->jrdev);
- kfree(ctrlpriv);
-
- return ret;
-}
-
/*
* Descriptor to instantiate RNG State Handle 0 in normal mode and
* load the JDKEK, TDKEK and TDSK registers
*/
-static void build_instantiation_desc(u32 *desc)
+static void build_instantiation_desc(u32 *desc, int handle, int do_sk)
{
- u32 *jump_cmd;
+ u32 *jump_cmd, op_flags;
init_job_desc(desc, 0);
+ op_flags = OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG |
+ (handle << OP_ALG_AAI_SHIFT) | OP_ALG_AS_INIT;
+
/* INIT RNG in non-test mode */
- append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG |
- OP_ALG_AS_INIT);
+ append_operation(desc, op_flags);
+
+ if (!handle && do_sk) {
+ /*
+ * For SH0, Secure Keys must be generated as well
+ */
+
+ /* wait for done */
+ jump_cmd = append_jump(desc, JUMP_CLASS_CLASS1);
+ set_jump_tgt_here(desc, jump_cmd);
+
+ /*
+ * load 1 to clear written reg:
+ * resets the done interrrupt and returns the RNG to idle.
+ */
+ append_load_imm_u32(desc, 1, LDST_SRCDST_WORD_CLRW);
+
+ /* Initialize State Handle */
+ append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG |
+ OP_ALG_AAI_RNG4_SK);
+ }
- /* wait for done */
- jump_cmd = append_jump(desc, JUMP_CLASS_CLASS1);
- set_jump_tgt_here(desc, jump_cmd);
+ append_jump(desc, JUMP_CLASS_CLASS1 | JUMP_TYPE_HALT);
+}
- /*
- * load 1 to clear written reg:
- * resets the done interrupt and returns the RNG to idle.
- */
- append_load_imm_u32(desc, 1, LDST_SRCDST_WORD_CLRW);
+/* Descriptor for deinstantiation of State Handle 0 of the RNG block. */
+static void build_deinstantiation_desc(u32 *desc, int handle)
+{
+ init_job_desc(desc, 0);
- /* generate secure keys (non-test) */
+ /* Uninstantiate State Handle 0 */
append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG |
- OP_ALG_RNG4_SK);
+ (handle << OP_ALG_AAI_SHIFT) | OP_ALG_AS_INITFINAL);
+
+ append_jump(desc, JUMP_CLASS_CLASS1 | JUMP_TYPE_HALT);
}
-static int instantiate_rng(struct device *ctrldev)
+/*
+ * run_descriptor_deco0 - runs a descriptor on DECO0, under direct control of
+ * the software (no JR/QI used).
+ * @ctrldev - pointer to device
+ * @status - descriptor status, after being run
+ *
+ * Return: - 0 if no error occurred
+ * - -ENODEV if the DECO couldn't be acquired
+ * - -EAGAIN if an error occurred while executing the descriptor
+ */
+static inline int run_descriptor_deco0(struct device *ctrldev, u32 *desc,
+ u32 *status)
{
struct caam_drv_private *ctrlpriv = dev_get_drvdata(ctrldev);
struct caam_full __iomem *topregs;
unsigned int timeout = 100000;
- u32 *desc;
- int i, ret = 0;
-
- desc = kmalloc(CAAM_CMD_SZ * 6, GFP_KERNEL | GFP_DMA);
- if (!desc) {
- dev_err(ctrldev, "can't allocate RNG init descriptor memory\n");
- return -ENOMEM;
- }
- build_instantiation_desc(desc);
+ u32 deco_dbg_reg, flags;
+ int i;
/* Set the bit to request direct access to DECO0 */
topregs = (struct caam_full __iomem *)ctrlpriv->ctrl;
@@ -103,36 +96,219 @@ static int instantiate_rng(struct device *ctrldev)
if (!timeout) {
dev_err(ctrldev, "failed to acquire DECO 0\n");
- ret = -EIO;
- goto out;
+ clrbits32(&topregs->ctrl.deco_rq, DECORR_RQD0ENABLE);
+ return -ENODEV;
}
for (i = 0; i < desc_len(desc); i++)
- topregs->deco.descbuf[i] = *(desc + i);
+ wr_reg32(&topregs->deco.descbuf[i], *(desc + i));
+
+ flags = DECO_JQCR_WHL;
+ /*
+ * If the descriptor length is longer than 4 words, then the
+ * FOUR bit in JRCTRL register must be set.
+ */
+ if (desc_len(desc) >= 4)
+ flags |= DECO_JQCR_FOUR;
- wr_reg32(&topregs->deco.jr_ctl_hi, DECO_JQCR_WHL | DECO_JQCR_FOUR);
+ /* Instruct the DECO to execute it */
+ wr_reg32(&topregs->deco.jr_ctl_hi, flags);
timeout = 10000000;
- while ((rd_reg32(&topregs->deco.desc_dbg) & DECO_DBG_VALID) &&
- --timeout)
+ do {
+ deco_dbg_reg = rd_reg32(&topregs->deco.desc_dbg);
+ /*
+ * If an error occured in the descriptor, then
+ * the DECO status field will be set to 0x0D
+ */
+ if ((deco_dbg_reg & DESC_DBG_DECO_STAT_MASK) ==
+ DESC_DBG_DECO_STAT_HOST_ERR)
+ break;
cpu_relax();
+ } while ((deco_dbg_reg & DESC_DBG_DECO_STAT_VALID) && --timeout);
- if (!timeout) {
- dev_err(ctrldev, "failed to instantiate RNG\n");
- ret = -EIO;
- }
+ *status = rd_reg32(&topregs->deco.op_status_hi) &
+ DECO_OP_STATUS_HI_ERR_MASK;
+ /* Mark the DECO as free */
clrbits32(&topregs->ctrl.deco_rq, DECORR_RQD0ENABLE);
-out:
+
+ if (!timeout)
+ return -EAGAIN;
+
+ return 0;
+}
+
+/*
+ * instantiate_rng - builds and executes a descriptor on DECO0,
+ * which initializes the RNG block.
+ * @ctrldev - pointer to device
+ * @state_handle_mask - bitmask containing the instantiation status
+ * for the RNG4 state handles which exist in
+ * the RNG4 block: 1 if it's been instantiated
+ * by an external entry, 0 otherwise.
+ * @gen_sk - generate data to be loaded into the JDKEK, TDKEK and TDSK;
+ * Caution: this can be done only once; if the keys need to be
+ * regenerated, a POR is required
+ *
+ * Return: - 0 if no error occurred
+ * - -ENOMEM if there isn't enough memory to allocate the descriptor
+ * - -ENODEV if DECO0 couldn't be acquired
+ * - -EAGAIN if an error occurred when executing the descriptor
+ * f.i. there was a RNG hardware error due to not "good enough"
+ * entropy being aquired.
+ */
+static int instantiate_rng(struct device *ctrldev, int state_handle_mask,
+ int gen_sk)
+{
+ struct caam_drv_private *ctrlpriv = dev_get_drvdata(ctrldev);
+ struct caam_full __iomem *topregs;
+ struct rng4tst __iomem *r4tst;
+ u32 *desc, status, rdsta_val;
+ int ret = 0, sh_idx;
+
+ topregs = (struct caam_full __iomem *)ctrlpriv->ctrl;
+ r4tst = &topregs->ctrl.r4tst[0];
+
+ desc = kmalloc(CAAM_CMD_SZ * 7, GFP_KERNEL);
+ if (!desc)
+ return -ENOMEM;
+
+ for (sh_idx = 0; sh_idx < RNG4_MAX_HANDLES; sh_idx++) {
+ /*
+ * If the corresponding bit is set, this state handle
+ * was initialized by somebody else, so it's left alone.
+ */
+ if ((1 << sh_idx) & state_handle_mask)
+ continue;
+
+ /* Create the descriptor for instantiating RNG State Handle */
+ build_instantiation_desc(desc, sh_idx, gen_sk);
+
+ /* Try to run it through DECO0 */
+ ret = run_descriptor_deco0(ctrldev, desc, &status);
+
+ /*
+ * If ret is not 0, or descriptor status is not 0, then
+ * something went wrong. No need to try the next state
+ * handle (if available), bail out here.
+ * Also, if for some reason, the State Handle didn't get
+ * instantiated although the descriptor has finished
+ * without any error (HW optimizations for later
+ * CAAM eras), then try again.
+ */
+ rdsta_val =
+ rd_reg32(&topregs->ctrl.r4tst[0].rdsta) & RDSTA_IFMASK;
+ if (status || !(rdsta_val & (1 << sh_idx)))
+ ret = -EAGAIN;
+ if (ret)
+ break;
+
+ dev_info(ctrldev, "Instantiated RNG4 SH%d\n", sh_idx);
+ /* Clear the contents before recreating the descriptor */
+ memset(desc, 0x00, CAAM_CMD_SZ * 7);
+ }
+
kfree(desc);
+
return ret;
}
/*
- * By default, the TRNG runs for 200 clocks per sample;
- * 1600 clocks per sample generates better entropy.
+ * deinstantiate_rng - builds and executes a descriptor on DECO0,
+ * which deinitializes the RNG block.
+ * @ctrldev - pointer to device
+ * @state_handle_mask - bitmask containing the instantiation status
+ * for the RNG4 state handles which exist in
+ * the RNG4 block: 1 if it's been instantiated
+ *
+ * Return: - 0 if no error occurred
+ * - -ENOMEM if there isn't enough memory to allocate the descriptor
+ * - -ENODEV if DECO0 couldn't be acquired
+ * - -EAGAIN if an error occurred when executing the descriptor
*/
-static void kick_trng(struct platform_device *pdev)
+static int deinstantiate_rng(struct device *ctrldev, int state_handle_mask)
+{
+ u32 *desc, status;
+ int sh_idx, ret = 0;
+
+ desc = kmalloc(CAAM_CMD_SZ * 3, GFP_KERNEL);
+ if (!desc)
+ return -ENOMEM;
+
+ for (sh_idx = 0; sh_idx < RNG4_MAX_HANDLES; sh_idx++) {
+ /*
+ * If the corresponding bit is set, then it means the state
+ * handle was initialized by us, and thus it needs to be
+ * deintialized as well
+ */
+ if ((1 << sh_idx) & state_handle_mask) {
+ /*
+ * Create the descriptor for deinstantating this state
+ * handle
+ */
+ build_deinstantiation_desc(desc, sh_idx);
+
+ /* Try to run it through DECO0 */
+ ret = run_descriptor_deco0(ctrldev, desc, &status);
+
+ if (ret || status) {
+ dev_err(ctrldev,
+ "Failed to deinstantiate RNG4 SH%d\n",
+ sh_idx);
+ break;
+ }
+ dev_info(ctrldev, "Deinstantiated RNG4 SH%d\n", sh_idx);
+ }
+ }
+
+ kfree(desc);
+
+ return ret;
+}
+
+static int caam_remove(struct platform_device *pdev)
+{
+ struct device *ctrldev;
+ struct caam_drv_private *ctrlpriv;
+ struct caam_full __iomem *topregs;
+ int ring, ret = 0;
+
+ ctrldev = &pdev->dev;
+ ctrlpriv = dev_get_drvdata(ctrldev);
+ topregs = (struct caam_full __iomem *)ctrlpriv->ctrl;
+
+ /* Remove platform devices for JobRs */
+ for (ring = 0; ring < ctrlpriv->total_jobrs; ring++) {
+ if (ctrlpriv->jrpdev[ring])
+ of_device_unregister(ctrlpriv->jrpdev[ring]);
+ }
+
+ /* De-initialize RNG state handles initialized by this driver. */
+ if (ctrlpriv->rng4_sh_init)
+ deinstantiate_rng(ctrldev, ctrlpriv->rng4_sh_init);
+
+ /* Shut down debug views */
+#ifdef CONFIG_DEBUG_FS
+ debugfs_remove_recursive(ctrlpriv->dfs_root);
+#endif
+
+ /* Unmap controller region */
+ iounmap(&topregs->ctrl);
+
+ kfree(ctrlpriv->jrpdev);
+ kfree(ctrlpriv);
+
+ return ret;
+}
+
+/*
+ * kick_trng - sets the various parameters for enabling the initialization
+ * of the RNG4 block in CAAM
+ * @pdev - pointer to the platform device
+ * @ent_delay - Defines the length (in system clocks) of each entropy sample.
+ */
+static void kick_trng(struct platform_device *pdev, int ent_delay)
{
struct device *ctrldev = &pdev->dev;
struct caam_drv_private *ctrlpriv = dev_get_drvdata(ctrldev);
@@ -145,14 +321,31 @@ static void kick_trng(struct platform_device *pdev)
/* put RNG4 into program mode */
setbits32(&r4tst->rtmctl, RTMCTL_PRGM);
- /* 1600 clocks per sample */
+
+ /*
+ * Performance-wise, it does not make sense to
+ * set the delay to a value that is lower
+ * than the last one that worked (i.e. the state handles
+ * were instantiated properly. Thus, instead of wasting
+ * time trying to set the values controlling the sample
+ * frequency, the function simply returns.
+ */
+ val = (rd_reg32(&r4tst->rtsdctl) & RTSDCTL_ENT_DLY_MASK)
+ >> RTSDCTL_ENT_DLY_SHIFT;
+ if (ent_delay <= val) {
+ /* put RNG4 into run mode */
+ clrbits32(&r4tst->rtmctl, RTMCTL_PRGM);
+ return;
+ }
+
val = rd_reg32(&r4tst->rtsdctl);
- val = (val & ~RTSDCTL_ENT_DLY_MASK) | (1600 << RTSDCTL_ENT_DLY_SHIFT);
+ val = (val & ~RTSDCTL_ENT_DLY_MASK) |
+ (ent_delay << RTSDCTL_ENT_DLY_SHIFT);
wr_reg32(&r4tst->rtsdctl, val);
- /* min. freq. count */
- wr_reg32(&r4tst->rtfrqmin, 400);
- /* max. freq. count */
- wr_reg32(&r4tst->rtfrqmax, 6400);
+ /* min. freq. count, equal to 1/4 of the entropy sample length */
+ wr_reg32(&r4tst->rtfrqmin, ent_delay >> 2);
+ /* max. freq. count, equal to 8 times the entropy sample length */
+ wr_reg32(&r4tst->rtfrqmax, ent_delay << 3);
/* put RNG4 into run mode */
clrbits32(&r4tst->rtmctl, RTMCTL_PRGM);
}
@@ -193,7 +386,7 @@ EXPORT_SYMBOL(caam_get_era);
/* Probe routine for CAAM top (controller) level */
static int caam_probe(struct platform_device *pdev)
{
- int ret, ring, rspec;
+ int ret, ring, rspec, gen_sk, ent_delay = RTSDCTL_ENT_DLY_MIN;
u64 caam_id;
struct device *dev;
struct device_node *nprop, *np;
@@ -258,8 +451,9 @@ static int caam_probe(struct platform_device *pdev)
rspec++;
}
- ctrlpriv->jrdev = kzalloc(sizeof(struct device *) * rspec, GFP_KERNEL);
- if (ctrlpriv->jrdev == NULL) {
+ ctrlpriv->jrpdev = kzalloc(sizeof(struct platform_device *) * rspec,
+ GFP_KERNEL);
+ if (ctrlpriv->jrpdev == NULL) {
iounmap(&topregs->ctrl);
return -ENOMEM;
}
@@ -267,13 +461,24 @@ static int caam_probe(struct platform_device *pdev)
ring = 0;
ctrlpriv->total_jobrs = 0;
for_each_compatible_node(np, NULL, "fsl,sec-v4.0-job-ring") {
- caam_jr_probe(pdev, np, ring);
+ ctrlpriv->jrpdev[ring] =
+ of_platform_device_create(np, NULL, dev);
+ if (!ctrlpriv->jrpdev[ring]) {
+ pr_warn("JR%d Platform device creation error\n", ring);
+ continue;
+ }
ctrlpriv->total_jobrs++;
ring++;
}
if (!ring) {
for_each_compatible_node(np, NULL, "fsl,sec4.0-job-ring") {
- caam_jr_probe(pdev, np, ring);
+ ctrlpriv->jrpdev[ring] =
+ of_platform_device_create(np, NULL, dev);
+ if (!ctrlpriv->jrpdev[ring]) {
+ pr_warn("JR%d Platform device creation error\n",
+ ring);
+ continue;
+ }
ctrlpriv->total_jobrs++;
ring++;
}
@@ -299,16 +504,55 @@ static int caam_probe(struct platform_device *pdev)
/*
* If SEC has RNG version >= 4 and RNG state handle has not been
- * already instantiated ,do RNG instantiation
+ * already instantiated, do RNG instantiation
*/
- if ((cha_vid & CHA_ID_RNG_MASK) >> CHA_ID_RNG_SHIFT >= 4 &&
- !(rd_reg32(&topregs->ctrl.r4tst[0].rdsta) & RDSTA_IF0)) {
- kick_trng(pdev);
- ret = instantiate_rng(dev);
+ if ((cha_vid & CHA_ID_RNG_MASK) >> CHA_ID_RNG_SHIFT >= 4) {
+ ctrlpriv->rng4_sh_init =
+ rd_reg32(&topregs->ctrl.r4tst[0].rdsta);
+ /*
+ * If the secure keys (TDKEK, JDKEK, TDSK), were already
+ * generated, signal this to the function that is instantiating
+ * the state handles. An error would occur if RNG4 attempts
+ * to regenerate these keys before the next POR.
+ */
+ gen_sk = ctrlpriv->rng4_sh_init & RDSTA_SKVN ? 0 : 1;
+ ctrlpriv->rng4_sh_init &= RDSTA_IFMASK;
+ do {
+ int inst_handles =
+ rd_reg32(&topregs->ctrl.r4tst[0].rdsta) &
+ RDSTA_IFMASK;
+ /*
+ * If either SH were instantiated by somebody else
+ * (e.g. u-boot) then it is assumed that the entropy
+ * parameters are properly set and thus the function
+ * setting these (kick_trng(...)) is skipped.
+ * Also, if a handle was instantiated, do not change
+ * the TRNG parameters.
+ */
+ if (!(ctrlpriv->rng4_sh_init || inst_handles)) {
+ kick_trng(pdev, ent_delay);
+ ent_delay += 400;
+ }
+ /*
+ * if instantiate_rng(...) fails, the loop will rerun
+ * and the kick_trng(...) function will modfiy the
+ * upper and lower limits of the entropy sampling
+ * interval, leading to a sucessful initialization of
+ * the RNG.
+ */
+ ret = instantiate_rng(dev, inst_handles,
+ gen_sk);
+ } while ((ret == -EAGAIN) && (ent_delay < RTSDCTL_ENT_DLY_MAX));
if (ret) {
+ dev_err(dev, "failed to instantiate RNG");
caam_remove(pdev);
return ret;
}
+ /*
+ * Set handles init'ed by this module as the complement of the
+ * already initialized ones
+ */
+ ctrlpriv->rng4_sh_init = ~ctrlpriv->rng4_sh_init & RDSTA_IFMASK;
/* Enable RDB bit so that RNG works faster */
setbits32(&topregs->ctrl.scfgr, SCFGR_RDBENABLE);
diff --git a/drivers/crypto/caam/desc.h b/drivers/crypto/caam/desc.h
index 53b296f78b0d..7e4500f18df6 100644
--- a/drivers/crypto/caam/desc.h
+++ b/drivers/crypto/caam/desc.h
@@ -1155,8 +1155,15 @@ struct sec4_sg_entry {
/* randomizer AAI set */
#define OP_ALG_AAI_RNG (0x00 << OP_ALG_AAI_SHIFT)
-#define OP_ALG_AAI_RNG_NOZERO (0x10 << OP_ALG_AAI_SHIFT)
-#define OP_ALG_AAI_RNG_ODD (0x20 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG_NZB (0x10 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG_OBP (0x20 << OP_ALG_AAI_SHIFT)
+
+/* RNG4 AAI set */
+#define OP_ALG_AAI_RNG4_SH_0 (0x00 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG4_SH_1 (0x01 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG4_PS (0x40 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG4_AI (0x80 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG4_SK (0x100 << OP_ALG_AAI_SHIFT)
/* hmac/smac AAI set */
#define OP_ALG_AAI_HASH (0x00 << OP_ALG_AAI_SHIFT)
@@ -1178,12 +1185,6 @@ struct sec4_sg_entry {
#define OP_ALG_AAI_GSM (0x10 << OP_ALG_AAI_SHIFT)
#define OP_ALG_AAI_EDGE (0x20 << OP_ALG_AAI_SHIFT)
-/* RNG4 set */
-#define OP_ALG_RNG4_SHIFT 4
-#define OP_ALG_RNG4_MASK (0x1f3 << OP_ALG_RNG4_SHIFT)
-
-#define OP_ALG_RNG4_SK (0x100 << OP_ALG_RNG4_SHIFT)
-
#define OP_ALG_AS_SHIFT 2
#define OP_ALG_AS_MASK (0x3 << OP_ALG_AS_SHIFT)
#define OP_ALG_AS_UPDATE (0 << OP_ALG_AS_SHIFT)
diff --git a/drivers/crypto/caam/intern.h b/drivers/crypto/caam/intern.h
index 34c4b9f7fbfa..6d85fcc5bd0a 100644
--- a/drivers/crypto/caam/intern.h
+++ b/drivers/crypto/caam/intern.h
@@ -37,13 +37,16 @@ struct caam_jrentry_info {
/* Private sub-storage for a single JobR */
struct caam_drv_private_jr {
- struct device *parentdev; /* points back to controller dev */
- struct platform_device *jr_pdev;/* points to platform device for JR */
+ struct list_head list_node; /* Job Ring device list */
+ struct device *dev;
int ridx;
struct caam_job_ring __iomem *rregs; /* JobR's register space */
struct tasklet_struct irqtask;
int irq; /* One per queue */
+ /* Number of scatterlist crypt transforms active on the JobR */
+ atomic_t tfm_count ____cacheline_aligned;
+
/* Job ring info */
int ringsize; /* Size of rings (assume input = output) */
struct caam_jrentry_info *entinfo; /* Alloc'ed 1 per ring entry */
@@ -63,7 +66,7 @@ struct caam_drv_private_jr {
struct caam_drv_private {
struct device *dev;
- struct device **jrdev; /* Alloc'ed array per sub-device */
+ struct platform_device **jrpdev; /* Alloc'ed array per sub-device */
struct platform_device *pdev;
/* Physical-presence section */
@@ -80,12 +83,11 @@ struct caam_drv_private {
u8 qi_present; /* Nonzero if QI present in device */
int secvio_irq; /* Security violation interrupt number */
- /* which jr allocated to scatterlist crypto */
- atomic_t tfm_count ____cacheline_aligned;
- /* list of registered crypto algorithms (mk generic context handle?) */
- struct list_head alg_list;
- /* list of registered hash algorithms (mk generic context handle?) */
- struct list_head hash_list;
+#define RNG4_MAX_HANDLES 2
+ /* RNG4 block */
+ u32 rng4_sh_init; /* This bitmap shows which of the State
+ Handles of the RNG4 block are initialized
+ by this driver */
/*
* debugfs entries for developer view into driver/device
diff --git a/drivers/crypto/caam/jr.c b/drivers/crypto/caam/jr.c
index bdb786d5a5e5..d23356d20e1c 100644
--- a/drivers/crypto/caam/jr.c
+++ b/drivers/crypto/caam/jr.c
@@ -13,6 +13,113 @@
#include "desc.h"
#include "intern.h"
+struct jr_driver_data {
+ /* List of Physical JobR's with the Driver */
+ struct list_head jr_list;
+ spinlock_t jr_alloc_lock; /* jr_list lock */
+} ____cacheline_aligned;
+
+static struct jr_driver_data driver_data;
+
+static int caam_reset_hw_jr(struct device *dev)
+{
+ struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
+ unsigned int timeout = 100000;
+
+ /*
+ * mask interrupts since we are going to poll
+ * for reset completion status
+ */
+ setbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK);
+
+ /* initiate flush (required prior to reset) */
+ wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET);
+ while (((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) ==
+ JRINT_ERR_HALT_INPROGRESS) && --timeout)
+ cpu_relax();
+
+ if ((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) !=
+ JRINT_ERR_HALT_COMPLETE || timeout == 0) {
+ dev_err(dev, "failed to flush job ring %d\n", jrp->ridx);
+ return -EIO;
+ }
+
+ /* initiate reset */
+ timeout = 100000;
+ wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET);
+ while ((rd_reg32(&jrp->rregs->jrcommand) & JRCR_RESET) && --timeout)
+ cpu_relax();
+
+ if (timeout == 0) {
+ dev_err(dev, "failed to reset job ring %d\n", jrp->ridx);
+ return -EIO;
+ }
+
+ /* unmask interrupts */
+ clrbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK);
+
+ return 0;
+}
+
+/*
+ * Shutdown JobR independent of platform property code
+ */
+int caam_jr_shutdown(struct device *dev)
+{
+ struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
+ dma_addr_t inpbusaddr, outbusaddr;
+ int ret;
+
+ ret = caam_reset_hw_jr(dev);
+
+ tasklet_kill(&jrp->irqtask);
+
+ /* Release interrupt */
+ free_irq(jrp->irq, dev);
+
+ /* Free rings */
+ inpbusaddr = rd_reg64(&jrp->rregs->inpring_base);
+ outbusaddr = rd_reg64(&jrp->rregs->outring_base);
+ dma_free_coherent(dev, sizeof(dma_addr_t) * JOBR_DEPTH,
+ jrp->inpring, inpbusaddr);
+ dma_free_coherent(dev, sizeof(struct jr_outentry) * JOBR_DEPTH,
+ jrp->outring, outbusaddr);
+ kfree(jrp->entinfo);
+
+ return ret;
+}
+
+static int caam_jr_remove(struct platform_device *pdev)
+{
+ int ret;
+ struct device *jrdev;
+ struct caam_drv_private_jr *jrpriv;
+
+ jrdev = &pdev->dev;
+ jrpriv = dev_get_drvdata(jrdev);
+
+ /*
+ * Return EBUSY if job ring already allocated.
+ */
+ if (atomic_read(&jrpriv->tfm_count)) {
+ dev_err(jrdev, "Device is busy\n");
+ return -EBUSY;
+ }
+
+ /* Remove the node from Physical JobR list maintained by driver */
+ spin_lock(&driver_data.jr_alloc_lock);
+ list_del(&jrpriv->list_node);
+ spin_unlock(&driver_data.jr_alloc_lock);
+
+ /* Release ring */
+ ret = caam_jr_shutdown(jrdev);
+ if (ret)
+ dev_err(jrdev, "Failed to shut down job ring\n");
+ irq_dispose_mapping(jrpriv->irq);
+
+ return ret;
+}
+
/* Main per-ring interrupt handler */
static irqreturn_t caam_jr_interrupt(int irq, void *st_dev)
{
@@ -128,6 +235,59 @@ static void caam_jr_dequeue(unsigned long devarg)
}
/**
+ * caam_jr_alloc() - Alloc a job ring for someone to use as needed.
+ *
+ * returns : pointer to the newly allocated physical
+ * JobR dev can be written to if successful.
+ **/
+struct device *caam_jr_alloc(void)
+{
+ struct caam_drv_private_jr *jrpriv, *min_jrpriv = NULL;
+ struct device *dev = NULL;
+ int min_tfm_cnt = INT_MAX;
+ int tfm_cnt;
+
+ spin_lock(&driver_data.jr_alloc_lock);
+
+ if (list_empty(&driver_data.jr_list)) {
+ spin_unlock(&driver_data.jr_alloc_lock);
+ return ERR_PTR(-ENODEV);
+ }
+
+ list_for_each_entry(jrpriv, &driver_data.jr_list, list_node) {
+ tfm_cnt = atomic_read(&jrpriv->tfm_count);
+ if (tfm_cnt < min_tfm_cnt) {
+ min_tfm_cnt = tfm_cnt;
+ min_jrpriv = jrpriv;
+ }
+ if (!min_tfm_cnt)
+ break;
+ }
+
+ if (min_jrpriv) {
+ atomic_inc(&min_jrpriv->tfm_count);
+ dev = min_jrpriv->dev;
+ }
+ spin_unlock(&driver_data.jr_alloc_lock);
+
+ return dev;
+}
+EXPORT_SYMBOL(caam_jr_alloc);
+
+/**
+ * caam_jr_free() - Free the Job Ring
+ * @rdev - points to the dev that identifies the Job ring to
+ * be released.
+ **/
+void caam_jr_free(struct device *rdev)
+{
+ struct caam_drv_private_jr *jrpriv = dev_get_drvdata(rdev);
+
+ atomic_dec(&jrpriv->tfm_count);
+}
+EXPORT_SYMBOL(caam_jr_free);
+
+/**
* caam_jr_enqueue() - Enqueue a job descriptor head. Returns 0 if OK,
* -EBUSY if the queue is full, -EIO if it cannot map the caller's
* descriptor.
@@ -207,46 +367,6 @@ int caam_jr_enqueue(struct device *dev, u32 *desc,
}
EXPORT_SYMBOL(caam_jr_enqueue);
-static int caam_reset_hw_jr(struct device *dev)
-{
- struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
- unsigned int timeout = 100000;
-
- /*
- * mask interrupts since we are going to poll
- * for reset completion status
- */
- setbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK);
-
- /* initiate flush (required prior to reset) */
- wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET);
- while (((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) ==
- JRINT_ERR_HALT_INPROGRESS) && --timeout)
- cpu_relax();
-
- if ((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) !=
- JRINT_ERR_HALT_COMPLETE || timeout == 0) {
- dev_err(dev, "failed to flush job ring %d\n", jrp->ridx);
- return -EIO;
- }
-
- /* initiate reset */
- timeout = 100000;
- wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET);
- while ((rd_reg32(&jrp->rregs->jrcommand) & JRCR_RESET) && --timeout)
- cpu_relax();
-
- if (timeout == 0) {
- dev_err(dev, "failed to reset job ring %d\n", jrp->ridx);
- return -EIO;
- }
-
- /* unmask interrupts */
- clrbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK);
-
- return 0;
-}
-
/*
* Init JobR independent of platform property detection
*/
@@ -262,7 +382,7 @@ static int caam_jr_init(struct device *dev)
/* Connect job ring interrupt handler. */
error = request_irq(jrp->irq, caam_jr_interrupt, IRQF_SHARED,
- "caam-jobr", dev);
+ dev_name(dev), dev);
if (error) {
dev_err(dev, "can't connect JobR %d interrupt (%d)\n",
jrp->ridx, jrp->irq);
@@ -318,86 +438,43 @@ static int caam_jr_init(struct device *dev)
return 0;
}
-/*
- * Shutdown JobR independent of platform property code
- */
-int caam_jr_shutdown(struct device *dev)
-{
- struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
- dma_addr_t inpbusaddr, outbusaddr;
- int ret;
-
- ret = caam_reset_hw_jr(dev);
-
- tasklet_kill(&jrp->irqtask);
-
- /* Release interrupt */
- free_irq(jrp->irq, dev);
-
- /* Free rings */
- inpbusaddr = rd_reg64(&jrp->rregs->inpring_base);
- outbusaddr = rd_reg64(&jrp->rregs->outring_base);
- dma_free_coherent(dev, sizeof(dma_addr_t) * JOBR_DEPTH,
- jrp->inpring, inpbusaddr);
- dma_free_coherent(dev, sizeof(struct jr_outentry) * JOBR_DEPTH,
- jrp->outring, outbusaddr);
- kfree(jrp->entinfo);
- of_device_unregister(jrp->jr_pdev);
-
- return ret;
-}
/*
- * Probe routine for each detected JobR subsystem. It assumes that
- * property detection was picked up externally.
+ * Probe routine for each detected JobR subsystem.
*/
-int caam_jr_probe(struct platform_device *pdev, struct device_node *np,
- int ring)
+static int caam_jr_probe(struct platform_device *pdev)
{
- struct device *ctrldev, *jrdev;
- struct platform_device *jr_pdev;
- struct caam_drv_private *ctrlpriv;
+ struct device *jrdev;
+ struct device_node *nprop;
+ struct caam_job_ring __iomem *ctrl;
struct caam_drv_private_jr *jrpriv;
- u32 *jroffset;
+ static int total_jobrs;
int error;
- ctrldev = &pdev->dev;
- ctrlpriv = dev_get_drvdata(ctrldev);
-
+ jrdev = &pdev->dev;
jrpriv = kmalloc(sizeof(struct caam_drv_private_jr),
GFP_KERNEL);
- if (jrpriv == NULL) {
- dev_err(ctrldev, "can't alloc private mem for job ring %d\n",
- ring);
+ if (!jrpriv)
return -ENOMEM;
- }
- jrpriv->parentdev = ctrldev; /* point back to parent */
- jrpriv->ridx = ring; /* save ring identity relative to detection */
- /*
- * Derive a pointer to the detected JobRs regs
- * Driver has already iomapped the entire space, we just
- * need to add in the offset to this JobR. Don't know if I
- * like this long-term, but it'll run
- */
- jroffset = (u32 *)of_get_property(np, "reg", NULL);
- jrpriv->rregs = (struct caam_job_ring __iomem *)((void *)ctrlpriv->ctrl
- + *jroffset);
+ dev_set_drvdata(jrdev, jrpriv);
- /* Build a local dev for each detected queue */
- jr_pdev = of_platform_device_create(np, NULL, ctrldev);
- if (jr_pdev == NULL) {
- kfree(jrpriv);
- return -EINVAL;
+ /* save ring identity relative to detection */
+ jrpriv->ridx = total_jobrs++;
+
+ nprop = pdev->dev.of_node;
+ /* Get configuration properties from device tree */
+ /* First, get register page */
+ ctrl = of_iomap(nprop, 0);
+ if (!ctrl) {
+ dev_err(jrdev, "of_iomap() failed\n");
+ return -ENOMEM;
}
- jrpriv->jr_pdev = jr_pdev;
- jrdev = &jr_pdev->dev;
- dev_set_drvdata(jrdev, jrpriv);
- ctrlpriv->jrdev[ring] = jrdev;
+ jrpriv->rregs = (struct caam_job_ring __force *)ctrl;
if (sizeof(dma_addr_t) == sizeof(u64))
- if (of_device_is_compatible(np, "fsl,sec-v5.0-job-ring"))
+ if (of_device_is_compatible(nprop, "fsl,sec-v5.0-job-ring"))
dma_set_mask(jrdev, DMA_BIT_MASK(40));
else
dma_set_mask(jrdev, DMA_BIT_MASK(36));
@@ -405,15 +482,61 @@ int caam_jr_probe(struct platform_device *pdev, struct device_node *np,
dma_set_mask(jrdev, DMA_BIT_MASK(32));
/* Identify the interrupt */
- jrpriv->irq = irq_of_parse_and_map(np, 0);
+ jrpriv->irq = irq_of_parse_and_map(nprop, 0);
/* Now do the platform independent part */
error = caam_jr_init(jrdev); /* now turn on hardware */
if (error) {
- of_device_unregister(jr_pdev);
kfree(jrpriv);
return error;
}
- return error;
+ jrpriv->dev = jrdev;
+ spin_lock(&driver_data.jr_alloc_lock);
+ list_add_tail(&jrpriv->list_node, &driver_data.jr_list);
+ spin_unlock(&driver_data.jr_alloc_lock);
+
+ atomic_set(&jrpriv->tfm_count, 0);
+
+ return 0;
+}
+
+static struct of_device_id caam_jr_match[] = {
+ {
+ .compatible = "fsl,sec-v4.0-job-ring",
+ },
+ {
+ .compatible = "fsl,sec4.0-job-ring",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, caam_jr_match);
+
+static struct platform_driver caam_jr_driver = {
+ .driver = {
+ .name = "caam_jr",
+ .owner = THIS_MODULE,
+ .of_match_table = caam_jr_match,
+ },
+ .probe = caam_jr_probe,
+ .remove = caam_jr_remove,
+};
+
+static int __init jr_driver_init(void)
+{
+ spin_lock_init(&driver_data.jr_alloc_lock);
+ INIT_LIST_HEAD(&driver_data.jr_list);
+ return platform_driver_register(&caam_jr_driver);
+}
+
+static void __exit jr_driver_exit(void)
+{
+ platform_driver_unregister(&caam_jr_driver);
}
+
+module_init(jr_driver_init);
+module_exit(jr_driver_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("FSL CAAM JR request backend");
+MODULE_AUTHOR("Freescale Semiconductor - NMG/STC");
diff --git a/drivers/crypto/caam/jr.h b/drivers/crypto/caam/jr.h
index 9d8741a59037..97113a6d6c58 100644
--- a/drivers/crypto/caam/jr.h
+++ b/drivers/crypto/caam/jr.h
@@ -8,12 +8,11 @@
#define JR_H
/* Prototypes for backend-level services exposed to APIs */
+struct device *caam_jr_alloc(void);
+void caam_jr_free(struct device *rdev);
int caam_jr_enqueue(struct device *dev, u32 *desc,
void (*cbk)(struct device *dev, u32 *desc, u32 status,
void *areq),
void *areq);
-extern int caam_jr_probe(struct platform_device *pdev, struct device_node *np,
- int ring);
-extern int caam_jr_shutdown(struct device *dev);
#endif /* JR_H */
diff --git a/drivers/crypto/caam/regs.h b/drivers/crypto/caam/regs.h
index 4455396918de..d50174f45b21 100644
--- a/drivers/crypto/caam/regs.h
+++ b/drivers/crypto/caam/regs.h
@@ -245,7 +245,7 @@ struct rngtst {
/* RNG4 TRNG test registers */
struct rng4tst {
-#define RTMCTL_PRGM 0x00010000 /* 1 -> program mode, 0 -> run mode */
+#define RTMCTL_PRGM 0x00010000 /* 1 -> program mode, 0 -> run mode */
u32 rtmctl; /* misc. control register */
u32 rtscmisc; /* statistical check misc. register */
u32 rtpkrrng; /* poker range register */
@@ -255,6 +255,8 @@ struct rng4tst {
};
#define RTSDCTL_ENT_DLY_SHIFT 16
#define RTSDCTL_ENT_DLY_MASK (0xffff << RTSDCTL_ENT_DLY_SHIFT)
+#define RTSDCTL_ENT_DLY_MIN 1200
+#define RTSDCTL_ENT_DLY_MAX 12800
u32 rtsdctl; /* seed control register */
union {
u32 rtsblim; /* PRGM=1: sparse bit limit register */
@@ -266,7 +268,11 @@ struct rng4tst {
u32 rtfrqcnt; /* PRGM=0: freq. count register */
};
u32 rsvd1[40];
+#define RDSTA_SKVT 0x80000000
+#define RDSTA_SKVN 0x40000000
#define RDSTA_IF0 0x00000001
+#define RDSTA_IF1 0x00000002
+#define RDSTA_IFMASK (RDSTA_IF1 | RDSTA_IF0)
u32 rdsta;
u32 rsvd2[15];
};
@@ -692,6 +698,7 @@ struct caam_deco {
u32 jr_ctl_hi; /* CxJRR - JobR Control Register @800 */
u32 jr_ctl_lo;
u64 jr_descaddr; /* CxDADR - JobR Descriptor Address */
+#define DECO_OP_STATUS_HI_ERR_MASK 0xF00000FF
u32 op_status_hi; /* DxOPSTA - DECO Operation Status */
u32 op_status_lo;
u32 rsvd24[2];
@@ -706,12 +713,13 @@ struct caam_deco {
u32 rsvd29[48];
u32 descbuf[64]; /* DxDESB - Descriptor buffer */
u32 rscvd30[193];
+#define DESC_DBG_DECO_STAT_HOST_ERR 0x00D00000
+#define DESC_DBG_DECO_STAT_VALID 0x80000000
+#define DESC_DBG_DECO_STAT_MASK 0x00F00000
u32 desc_dbg; /* DxDDR - DECO Debug Register */
u32 rsvd31[126];
};
-/* DECO DBG Register Valid Bit*/
-#define DECO_DBG_VALID 0x80000000
#define DECO_JQCR_WHL 0x20000000
#define DECO_JQCR_FOUR 0x10000000
diff --git a/drivers/crypto/caam/sg_sw_sec4.h b/drivers/crypto/caam/sg_sw_sec4.h
index e0037c8ee243..b12ff85f4241 100644
--- a/drivers/crypto/caam/sg_sw_sec4.h
+++ b/drivers/crypto/caam/sg_sw_sec4.h
@@ -117,6 +117,21 @@ static int dma_unmap_sg_chained(struct device *dev, struct scatterlist *sg,
return nents;
}
+/* Map SG page in kernel virtual address space and copy */
+static inline void sg_map_copy(u8 *dest, struct scatterlist *sg,
+ int len, int offset)
+{
+ u8 *mapped_addr;
+
+ /*
+ * Page here can be user-space pinned using get_user_pages
+ * Same must be kmapped before use and kunmapped subsequently
+ */
+ mapped_addr = kmap_atomic(sg_page(sg));
+ memcpy(dest, mapped_addr + offset, len);
+ kunmap_atomic(mapped_addr);
+}
+
/* Copy from len bytes of sg to dest, starting from beginning */
static inline void sg_copy(u8 *dest, struct scatterlist *sg, unsigned int len)
{
@@ -124,15 +139,15 @@ static inline void sg_copy(u8 *dest, struct scatterlist *sg, unsigned int len)
int cpy_index = 0, next_cpy_index = current_sg->length;
while (next_cpy_index < len) {
- memcpy(dest + cpy_index, (u8 *) sg_virt(current_sg),
- current_sg->length);
+ sg_map_copy(dest + cpy_index, current_sg, current_sg->length,
+ current_sg->offset);
current_sg = scatterwalk_sg_next(current_sg);
cpy_index = next_cpy_index;
next_cpy_index += current_sg->length;
}
if (cpy_index < len)
- memcpy(dest + cpy_index, (u8 *) sg_virt(current_sg),
- len - cpy_index);
+ sg_map_copy(dest + cpy_index, current_sg, len-cpy_index,
+ current_sg->offset);
}
/* Copy sg data, from to_skip to end, to dest */
@@ -140,7 +155,7 @@ static inline void sg_copy_part(u8 *dest, struct scatterlist *sg,
int to_skip, unsigned int end)
{
struct scatterlist *current_sg = sg;
- int sg_index, cpy_index;
+ int sg_index, cpy_index, offset;
sg_index = current_sg->length;
while (sg_index <= to_skip) {
@@ -148,9 +163,10 @@ static inline void sg_copy_part(u8 *dest, struct scatterlist *sg,
sg_index += current_sg->length;
}
cpy_index = sg_index - to_skip;
- memcpy(dest, (u8 *) sg_virt(current_sg) +
- current_sg->length - cpy_index, cpy_index);
- current_sg = scatterwalk_sg_next(current_sg);
- if (end - sg_index)
+ offset = current_sg->offset + current_sg->length - cpy_index;
+ sg_map_copy(dest, current_sg, cpy_index, offset);
+ if (end - sg_index) {
+ current_sg = scatterwalk_sg_next(current_sg);
sg_copy(dest + cpy_index, current_sg, end - sg_index);
+ }
}
diff --git a/drivers/crypto/dcp.c b/drivers/crypto/dcp.c
index a8a7dd4b0d25..247ab8048f5b 100644
--- a/drivers/crypto/dcp.c
+++ b/drivers/crypto/dcp.c
@@ -733,12 +733,9 @@ static int dcp_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dev);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!r) {
- dev_err(&pdev->dev, "failed to get IORESOURCE_MEM\n");
- return -ENXIO;
- }
- dev->dcp_regs_base = devm_ioremap(&pdev->dev, r->start,
- resource_size(r));
+ dev->dcp_regs_base = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(dev->dcp_regs_base))
+ return PTR_ERR(dev->dcp_regs_base);
dcp_set(dev, DCP_CTRL_SFRST, DCP_REG_CTRL);
udelay(10);
@@ -762,7 +759,8 @@ static int dcp_probe(struct platform_device *pdev)
return -EIO;
}
dev->dcp_vmi_irq = r->start;
- ret = request_irq(dev->dcp_vmi_irq, dcp_vmi_irq, 0, "dcp", dev);
+ ret = devm_request_irq(&pdev->dev, dev->dcp_vmi_irq, dcp_vmi_irq, 0,
+ "dcp", dev);
if (ret != 0) {
dev_err(&pdev->dev, "can't request_irq (0)\n");
return -EIO;
@@ -771,15 +769,14 @@ static int dcp_probe(struct platform_device *pdev)
r = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
if (!r) {
dev_err(&pdev->dev, "can't get IRQ resource (1)\n");
- ret = -EIO;
- goto err_free_irq0;
+ return -EIO;
}
dev->dcp_irq = r->start;
- ret = request_irq(dev->dcp_irq, dcp_irq, 0, "dcp", dev);
+ ret = devm_request_irq(&pdev->dev, dev->dcp_irq, dcp_irq, 0, "dcp",
+ dev);
if (ret != 0) {
dev_err(&pdev->dev, "can't request_irq (1)\n");
- ret = -EIO;
- goto err_free_irq0;
+ return -EIO;
}
dev->hw_pkg[0] = dma_alloc_coherent(&pdev->dev,
@@ -788,8 +785,7 @@ static int dcp_probe(struct platform_device *pdev)
GFP_KERNEL);
if (!dev->hw_pkg[0]) {
dev_err(&pdev->dev, "Could not allocate hw descriptors\n");
- ret = -ENOMEM;
- goto err_free_irq1;
+ return -ENOMEM;
}
for (i = 1; i < DCP_MAX_PKG; i++) {
@@ -848,16 +844,14 @@ err_unregister:
for (j = 0; j < i; j++)
crypto_unregister_alg(&algs[j]);
err_free_key_iv:
+ tasklet_kill(&dev->done_task);
+ tasklet_kill(&dev->queue_task);
dma_free_coherent(&pdev->dev, 2 * AES_KEYSIZE_128, dev->payload_base,
dev->payload_base_dma);
err_free_hw_packet:
dma_free_coherent(&pdev->dev, DCP_MAX_PKG *
sizeof(struct dcp_hw_packet), dev->hw_pkg[0],
dev->hw_phys_pkg);
-err_free_irq1:
- free_irq(dev->dcp_irq, dev);
-err_free_irq0:
- free_irq(dev->dcp_vmi_irq, dev);
return ret;
}
@@ -868,23 +862,20 @@ static int dcp_remove(struct platform_device *pdev)
int j;
dev = platform_get_drvdata(pdev);
- dma_free_coherent(&pdev->dev,
- DCP_MAX_PKG * sizeof(struct dcp_hw_packet),
- dev->hw_pkg[0], dev->hw_phys_pkg);
-
- dma_free_coherent(&pdev->dev, 2 * AES_KEYSIZE_128, dev->payload_base,
- dev->payload_base_dma);
+ misc_deregister(&dev->dcp_bootstream_misc);
- free_irq(dev->dcp_irq, dev);
- free_irq(dev->dcp_vmi_irq, dev);
+ for (j = 0; j < ARRAY_SIZE(algs); j++)
+ crypto_unregister_alg(&algs[j]);
tasklet_kill(&dev->done_task);
tasklet_kill(&dev->queue_task);
- for (j = 0; j < ARRAY_SIZE(algs); j++)
- crypto_unregister_alg(&algs[j]);
+ dma_free_coherent(&pdev->dev, 2 * AES_KEYSIZE_128, dev->payload_base,
+ dev->payload_base_dma);
- misc_deregister(&dev->dcp_bootstream_misc);
+ dma_free_coherent(&pdev->dev,
+ DCP_MAX_PKG * sizeof(struct dcp_hw_packet),
+ dev->hw_pkg[0], dev->hw_phys_pkg);
return 0;
}
diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index 214357e12dc0..9dd6e01eac33 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -1149,32 +1149,24 @@ static int aead_setkey(struct crypto_aead *tfm, const u8 *key,
unsigned int keylen)
{
struct ixp_ctx *ctx = crypto_aead_ctx(tfm);
- struct rtattr *rta = (struct rtattr *)key;
- struct crypto_authenc_key_param *param;
+ struct crypto_authenc_keys keys;
- if (!RTA_OK(rta, keylen))
- goto badkey;
- if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
- goto badkey;
- if (RTA_PAYLOAD(rta) < sizeof(*param))
+ if (crypto_authenc_extractkeys(&keys, key, keylen) != 0)
goto badkey;
- param = RTA_DATA(rta);
- ctx->enckey_len = be32_to_cpu(param->enckeylen);
-
- key += RTA_ALIGN(rta->rta_len);
- keylen -= RTA_ALIGN(rta->rta_len);
+ if (keys.authkeylen > sizeof(ctx->authkey))
+ goto badkey;
- if (keylen < ctx->enckey_len)
+ if (keys.enckeylen > sizeof(ctx->enckey))
goto badkey;
- ctx->authkey_len = keylen - ctx->enckey_len;
- memcpy(ctx->enckey, key + ctx->authkey_len, ctx->enckey_len);
- memcpy(ctx->authkey, key, ctx->authkey_len);
+ memcpy(ctx->authkey, keys.authkey, keys.authkeylen);
+ memcpy(ctx->enckey, keys.enckey, keys.enckeylen);
+ ctx->authkey_len = keys.authkeylen;
+ ctx->enckey_len = keys.enckeylen;
return aead_setup(tfm, crypto_aead_authsize(tfm));
badkey:
- ctx->enckey_len = 0;
crypto_aead_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
return -EINVAL;
}
diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c
index 3374a3ebe4c7..8d1e6f8e9e9c 100644
--- a/drivers/crypto/mv_cesa.c
+++ b/drivers/crypto/mv_cesa.c
@@ -907,7 +907,7 @@ static int mv_cra_hash_hmac_sha1_init(struct crypto_tfm *tfm)
return mv_cra_hash_init(tfm, "sha1", COP_HMAC_SHA1, SHA1_BLOCK_SIZE);
}
-irqreturn_t crypto_int(int irq, void *priv)
+static irqreturn_t crypto_int(int irq, void *priv)
{
u32 val;
@@ -928,7 +928,7 @@ irqreturn_t crypto_int(int irq, void *priv)
return IRQ_HANDLED;
}
-struct crypto_alg mv_aes_alg_ecb = {
+static struct crypto_alg mv_aes_alg_ecb = {
.cra_name = "ecb(aes)",
.cra_driver_name = "mv-ecb-aes",
.cra_priority = 300,
@@ -951,7 +951,7 @@ struct crypto_alg mv_aes_alg_ecb = {
},
};
-struct crypto_alg mv_aes_alg_cbc = {
+static struct crypto_alg mv_aes_alg_cbc = {
.cra_name = "cbc(aes)",
.cra_driver_name = "mv-cbc-aes",
.cra_priority = 300,
@@ -975,7 +975,7 @@ struct crypto_alg mv_aes_alg_cbc = {
},
};
-struct ahash_alg mv_sha1_alg = {
+static struct ahash_alg mv_sha1_alg = {
.init = mv_hash_init,
.update = mv_hash_update,
.final = mv_hash_final,
@@ -999,7 +999,7 @@ struct ahash_alg mv_sha1_alg = {
}
};
-struct ahash_alg mv_hmac_sha1_alg = {
+static struct ahash_alg mv_hmac_sha1_alg = {
.init = mv_hash_init,
.update = mv_hash_update,
.final = mv_hash_final,
@@ -1084,7 +1084,7 @@ static int mv_probe(struct platform_device *pdev)
goto err_unmap_sram;
}
- ret = request_irq(irq, crypto_int, IRQF_DISABLED, dev_name(&pdev->dev),
+ ret = request_irq(irq, crypto_int, 0, dev_name(&pdev->dev),
cp);
if (ret)
goto err_thread;
@@ -1187,7 +1187,7 @@ static struct platform_driver marvell_crypto = {
.driver = {
.owner = THIS_MODULE,
.name = "mv_crypto",
- .of_match_table = of_match_ptr(mv_cesa_of_match_table),
+ .of_match_table = mv_cesa_of_match_table,
},
};
MODULE_ALIAS("platform:mv_crypto");
diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c
index ce791c2f81f7..a9ccbf14096e 100644
--- a/drivers/crypto/omap-aes.c
+++ b/drivers/crypto/omap-aes.c
@@ -275,7 +275,7 @@ static int omap_aes_write_ctrl(struct omap_aes_dev *dd)
if (dd->flags & FLAGS_CBC)
val |= AES_REG_CTRL_CBC;
if (dd->flags & FLAGS_CTR) {
- val |= AES_REG_CTRL_CTR | AES_REG_CTRL_CTR_WIDTH_32;
+ val |= AES_REG_CTRL_CTR | AES_REG_CTRL_CTR_WIDTH_128;
mask = AES_REG_CTRL_CTR | AES_REG_CTRL_CTR_WIDTH_MASK;
}
if (dd->flags & FLAGS_ENCRYPT)
@@ -554,7 +554,7 @@ static int omap_aes_crypt_dma_stop(struct omap_aes_dev *dd)
return err;
}
-int omap_aes_check_aligned(struct scatterlist *sg)
+static int omap_aes_check_aligned(struct scatterlist *sg)
{
while (sg) {
if (!IS_ALIGNED(sg->offset, 4))
@@ -566,7 +566,7 @@ int omap_aes_check_aligned(struct scatterlist *sg)
return 0;
}
-int omap_aes_copy_sgs(struct omap_aes_dev *dd)
+static int omap_aes_copy_sgs(struct omap_aes_dev *dd)
{
void *buf_in, *buf_out;
int pages;
diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c
index e28104b4aab0..e45aaaf0db30 100644
--- a/drivers/crypto/omap-sham.c
+++ b/drivers/crypto/omap-sham.c
@@ -2033,3 +2033,4 @@ module_platform_driver(omap_sham_driver);
MODULE_DESCRIPTION("OMAP SHA1/MD5 hw acceleration support.");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Dmitry Kasatkin");
+MODULE_ALIAS("platform:omap-sham");
diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c
index 888f7f4a6d3f..a6175ba6d238 100644
--- a/drivers/crypto/picoxcell_crypto.c
+++ b/drivers/crypto/picoxcell_crypto.c
@@ -495,45 +495,29 @@ static int spacc_aead_setkey(struct crypto_aead *tfm, const u8 *key,
{
struct spacc_aead_ctx *ctx = crypto_aead_ctx(tfm);
struct spacc_alg *alg = to_spacc_alg(tfm->base.__crt_alg);
- struct rtattr *rta = (void *)key;
- struct crypto_authenc_key_param *param;
- unsigned int authkeylen, enckeylen;
+ struct crypto_authenc_keys keys;
int err = -EINVAL;
- if (!RTA_OK(rta, keylen))
+ if (crypto_authenc_extractkeys(&keys, key, keylen) != 0)
goto badkey;
- if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
+ if (keys.enckeylen > AES_MAX_KEY_SIZE)
goto badkey;
- if (RTA_PAYLOAD(rta) < sizeof(*param))
- goto badkey;
-
- param = RTA_DATA(rta);
- enckeylen = be32_to_cpu(param->enckeylen);
-
- key += RTA_ALIGN(rta->rta_len);
- keylen -= RTA_ALIGN(rta->rta_len);
-
- if (keylen < enckeylen)
- goto badkey;
-
- authkeylen = keylen - enckeylen;
-
- if (enckeylen > AES_MAX_KEY_SIZE)
+ if (keys.authkeylen > sizeof(ctx->hash_ctx))
goto badkey;
if ((alg->ctrl_default & SPACC_CRYPTO_ALG_MASK) ==
SPA_CTRL_CIPH_ALG_AES)
- err = spacc_aead_aes_setkey(tfm, key + authkeylen, enckeylen);
+ err = spacc_aead_aes_setkey(tfm, keys.enckey, keys.enckeylen);
else
- err = spacc_aead_des_setkey(tfm, key + authkeylen, enckeylen);
+ err = spacc_aead_des_setkey(tfm, keys.enckey, keys.enckeylen);
if (err)
goto badkey;
- memcpy(ctx->hash_ctx, key, authkeylen);
- ctx->hash_key_len = authkeylen;
+ memcpy(ctx->hash_ctx, keys.authkey, keys.authkeylen);
+ ctx->hash_key_len = keys.authkeylen;
return 0;
diff --git a/drivers/crypto/sahara.c b/drivers/crypto/sahara.c
index d7bb8bac36e9..785a9ded7bdf 100644
--- a/drivers/crypto/sahara.c
+++ b/drivers/crypto/sahara.c
@@ -1058,7 +1058,7 @@ static struct platform_driver sahara_driver = {
.driver = {
.name = SAHARA_NAME,
.owner = THIS_MODULE,
- .of_match_table = of_match_ptr(sahara_dt_ids),
+ .of_match_table = sahara_dt_ids,
},
.id_table = sahara_platform_ids,
};
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index 6cd0e6038583..905de4427e7c 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -673,39 +673,20 @@ static int aead_setkey(struct crypto_aead *authenc,
const u8 *key, unsigned int keylen)
{
struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
- struct rtattr *rta = (void *)key;
- struct crypto_authenc_key_param *param;
- unsigned int authkeylen;
- unsigned int enckeylen;
-
- if (!RTA_OK(rta, keylen))
- goto badkey;
+ struct crypto_authenc_keys keys;
- if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
+ if (crypto_authenc_extractkeys(&keys, key, keylen) != 0)
goto badkey;
- if (RTA_PAYLOAD(rta) < sizeof(*param))
+ if (keys.authkeylen + keys.enckeylen > TALITOS_MAX_KEY_SIZE)
goto badkey;
- param = RTA_DATA(rta);
- enckeylen = be32_to_cpu(param->enckeylen);
-
- key += RTA_ALIGN(rta->rta_len);
- keylen -= RTA_ALIGN(rta->rta_len);
-
- if (keylen < enckeylen)
- goto badkey;
+ memcpy(ctx->key, keys.authkey, keys.authkeylen);
+ memcpy(&ctx->key[keys.authkeylen], keys.enckey, keys.enckeylen);
- authkeylen = keylen - enckeylen;
-
- if (keylen > TALITOS_MAX_KEY_SIZE)
- goto badkey;
-
- memcpy(&ctx->key, key, keylen);
-
- ctx->keylen = keylen;
- ctx->enckeylen = enckeylen;
- ctx->authkeylen = authkeylen;
+ ctx->keylen = keys.authkeylen + keys.enckeylen;
+ ctx->enckeylen = keys.enckeylen;
+ ctx->authkeylen = keys.authkeylen;
return 0;
diff --git a/drivers/crypto/tegra-aes.c b/drivers/crypto/tegra-aes.c
index fa05e3c329bd..060eecc5dbc3 100644
--- a/drivers/crypto/tegra-aes.c
+++ b/drivers/crypto/tegra-aes.c
@@ -27,6 +27,8 @@
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/errno.h>
@@ -199,8 +201,6 @@ static void aes_workqueue_handler(struct work_struct *work);
static DECLARE_WORK(aes_work, aes_workqueue_handler);
static struct workqueue_struct *aes_wq;
-extern unsigned long long tegra_chip_uid(void);
-
static inline u32 aes_readl(struct tegra_aes_dev *dd, u32 offset)
{
return readl(dd->io_base + offset);
@@ -713,13 +713,12 @@ static int tegra_aes_rng_reset(struct crypto_rng *tfm, u8 *seed,
struct tegra_aes_dev *dd = aes_dev;
struct tegra_aes_ctx *ctx = &rng_ctx;
struct tegra_aes_slot *key_slot;
- struct timespec ts;
int ret = 0;
- u64 nsec, tmp[2];
+ u8 tmp[16]; /* 16 bytes = 128 bits of entropy */
u8 *dt;
if (!ctx || !dd) {
- dev_err(dd->dev, "ctx=0x%x, dd=0x%x\n",
+ pr_err("ctx=0x%x, dd=0x%x\n",
(unsigned int)ctx, (unsigned int)dd);
return -EINVAL;
}
@@ -778,14 +777,8 @@ static int tegra_aes_rng_reset(struct crypto_rng *tfm, u8 *seed,
if (dd->ivlen >= (2 * DEFAULT_RNG_BLK_SZ + AES_KEYSIZE_128)) {
dt = dd->iv + DEFAULT_RNG_BLK_SZ + AES_KEYSIZE_128;
} else {
- getnstimeofday(&ts);
- nsec = timespec_to_ns(&ts);
- do_div(nsec, 1000);
- nsec ^= dd->ctr << 56;
- dd->ctr++;
- tmp[0] = nsec;
- tmp[1] = tegra_chip_uid();
- dt = (u8 *)tmp;
+ get_random_bytes(tmp, sizeof(tmp));
+ dt = tmp;
}
memcpy(dd->dt, dt, DEFAULT_RNG_BLK_SZ);
@@ -804,7 +797,7 @@ static int tegra_aes_cra_init(struct crypto_tfm *tfm)
return 0;
}
-void tegra_aes_cra_exit(struct crypto_tfm *tfm)
+static void tegra_aes_cra_exit(struct crypto_tfm *tfm)
{
struct tegra_aes_ctx *ctx =
crypto_ablkcipher_ctx((struct crypto_ablkcipher *)tfm);
@@ -924,7 +917,7 @@ static int tegra_aes_probe(struct platform_device *pdev)
}
/* Initialize the vde clock */
- dd->aes_clk = clk_get(dev, "vde");
+ dd->aes_clk = devm_clk_get(dev, "vde");
if (IS_ERR(dd->aes_clk)) {
dev_err(dev, "iclock intialization failed.\n");
err = -ENODEV;
@@ -1033,8 +1026,6 @@ out:
if (dd->buf_out)
dma_free_coherent(dev, AES_HW_DMA_BUFFER_SIZE_BYTES,
dd->buf_out, dd->dma_buf_out);
- if (!IS_ERR(dd->aes_clk))
- clk_put(dd->aes_clk);
if (aes_wq)
destroy_workqueue(aes_wq);
spin_lock(&list_lock);
@@ -1068,7 +1059,6 @@ static int tegra_aes_remove(struct platform_device *pdev)
dd->buf_in, dd->dma_buf_in);
dma_free_coherent(dev, AES_HW_DMA_BUFFER_SIZE_BYTES,
dd->buf_out, dd->dma_buf_out);
- clk_put(dd->aes_clk);
aes_dev = NULL;
return 0;
diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
index 72c927dc3be1..54c18c220a60 100644
--- a/drivers/gpio/gpio-bcm-kona.c
+++ b/drivers/gpio/gpio-bcm-kona.c
@@ -158,7 +158,7 @@ static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio)
spin_unlock_irqrestore(&kona_gpio->lock, flags);
/* return the specified bit status */
- return !!(val & bit);
+ return !!(val & BIT(bit));
}
static int bcm_kona_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
diff --git a/drivers/gpio/gpio-msm-v2.c b/drivers/gpio/gpio-msm-v2.c
index f7a0cc4da950..7b37300973db 100644
--- a/drivers/gpio/gpio-msm-v2.c
+++ b/drivers/gpio/gpio-msm-v2.c
@@ -102,7 +102,7 @@ struct msm_gpio_dev {
DECLARE_BITMAP(wake_irqs, MAX_NR_GPIO);
DECLARE_BITMAP(dual_edge_irqs, MAX_NR_GPIO);
struct irq_domain *domain;
- unsigned int summary_irq;
+ int summary_irq;
void __iomem *msm_tlmm_base;
};
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index 3c3321f94053..db3129043e63 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -79,7 +79,7 @@ struct mvebu_gpio_chip {
spinlock_t lock;
void __iomem *membase;
void __iomem *percpu_membase;
- unsigned int irqbase;
+ int irqbase;
struct irq_domain *domain;
int soc_variant;
};
diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index f22f7f3e2e53..b4d42112d02d 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -286,11 +286,6 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
if (!chip->base)
return -ENOMEM;
- chip->domain = irq_domain_add_simple(adev->dev.of_node, PL061_GPIO_NR,
- irq_base, &pl061_domain_ops, chip);
- if (!chip->domain)
- return -ENODEV;
-
spin_lock_init(&chip->lock);
chip->gc.request = pl061_gpio_request;
@@ -320,6 +315,11 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
irq_set_chained_handler(irq, pl061_irq_handler);
irq_set_handler_data(irq, chip);
+ chip->domain = irq_domain_add_simple(adev->dev.of_node, PL061_GPIO_NR,
+ irq_base, &pl061_domain_ops, chip);
+ if (!chip->domain)
+ return -ENODEV;
+
for (i = 0; i < PL061_GPIO_NR; i++) {
if (pdata) {
if (pdata->directions & (1 << i))
diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
index d3f15ae93bd3..fe088a30567a 100644
--- a/drivers/gpio/gpio-rcar.c
+++ b/drivers/gpio/gpio-rcar.c
@@ -381,7 +381,7 @@ static int gpio_rcar_probe(struct platform_device *pdev)
if (!p->irq_domain) {
ret = -ENXIO;
dev_err(&pdev->dev, "cannot initialize irq domain\n");
- goto err1;
+ goto err0;
}
if (devm_request_irq(&pdev->dev, irq->start,
diff --git a/drivers/gpio/gpio-tb10x.c b/drivers/gpio/gpio-tb10x.c
index 0502b9a041a5..da071ddbad99 100644
--- a/drivers/gpio/gpio-tb10x.c
+++ b/drivers/gpio/gpio-tb10x.c
@@ -132,6 +132,7 @@ static int tb10x_gpio_direction_out(struct gpio_chip *chip,
int mask = BIT(offset);
int val = TB10X_GPIO_DIR_OUT << offset;
+ tb10x_gpio_set(chip, offset, value);
tb10x_set_bits(tb10x_gpio, OFFSET_TO_REG_DDR, mask, val);
return 0;
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index 0c7e891c8651..b97d6a6577b9 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -354,17 +354,18 @@ static void twl_set(struct gpio_chip *chip, unsigned offset, int value)
static int twl_direction_out(struct gpio_chip *chip, unsigned offset, int value)
{
struct gpio_twl4030_priv *priv = to_gpio_twl4030(chip);
+ int ret = -EINVAL;
mutex_lock(&priv->mutex);
if (offset < TWL4030_GPIO_MAX)
- twl4030_set_gpio_dataout(offset, value);
+ ret = twl4030_set_gpio_direction(offset, 0);
priv->direction |= BIT(offset);
mutex_unlock(&priv->mutex);
twl_set(chip, offset, value);
- return 0;
+ return ret;
}
static int twl_to_irq(struct gpio_chip *chip, unsigned offset)
@@ -435,7 +436,8 @@ static int gpio_twl4030_debounce(u32 debounce, u8 mmc_cd)
static int gpio_twl4030_remove(struct platform_device *pdev);
-static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev)
+static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev,
+ struct twl4030_gpio_platform_data *pdata)
{
struct twl4030_gpio_platform_data *omap_twl_info;
@@ -443,6 +445,9 @@ static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev)
if (!omap_twl_info)
return NULL;
+ if (pdata)
+ *omap_twl_info = *pdata;
+
omap_twl_info->use_leds = of_property_read_bool(dev->of_node,
"ti,use-leds");
@@ -500,7 +505,7 @@ no_irqs:
mutex_init(&priv->mutex);
if (node)
- pdata = of_gpio_twl4030(&pdev->dev);
+ pdata = of_gpio_twl4030(&pdev->dev, pdata);
if (pdata == NULL) {
dev_err(&pdev->dev, "Platform data is missing\n");
diff --git a/drivers/gpio/gpio-ucb1400.c b/drivers/gpio/gpio-ucb1400.c
index 1a605f2a0f55..06fb5cf99ded 100644
--- a/drivers/gpio/gpio-ucb1400.c
+++ b/drivers/gpio/gpio-ucb1400.c
@@ -105,3 +105,4 @@ module_platform_driver(ucb1400_gpio_driver);
MODULE_DESCRIPTION("Philips UCB1400 GPIO driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ucb1400_gpio");
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 4e10b10d3ddd..ac53a9593662 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -14,6 +14,7 @@
#include <linux/idr.h>
#include <linux/slab.h>
#include <linux/acpi.h>
+#include <linux/gpio/driver.h>
#define CREATE_TRACE_POINTS
#include <trace/events/gpio.h>
@@ -1308,6 +1309,18 @@ struct gpio_chip *gpiochip_find(void *data,
}
EXPORT_SYMBOL_GPL(gpiochip_find);
+static int gpiochip_match_name(struct gpio_chip *chip, void *data)
+{
+ const char *name = data;
+
+ return !strcmp(chip->label, name);
+}
+
+static struct gpio_chip *find_chip_by_name(const char *name)
+{
+ return gpiochip_find((void *)name, gpiochip_match_name);
+}
+
#ifdef CONFIG_PINCTRL
/**
@@ -1341,8 +1354,10 @@ int gpiochip_add_pingroup_range(struct gpio_chip *chip,
ret = pinctrl_get_group_pins(pctldev, pin_group,
&pin_range->range.pins,
&pin_range->range.npins);
- if (ret < 0)
+ if (ret < 0) {
+ kfree(pin_range);
return ret;
+ }
pinctrl_add_gpio_range(pctldev, &pin_range->range);
@@ -2260,26 +2275,10 @@ void gpiod_add_table(struct gpiod_lookup *table, size_t size)
mutex_unlock(&gpio_lookup_lock);
}
-/*
- * Caller must have a acquired gpio_lookup_lock
- */
-static struct gpio_chip *find_chip_by_name(const char *name)
-{
- struct gpio_chip *chip = NULL;
-
- list_for_each_entry(chip, &gpio_lookup_list, list) {
- if (chip->label == NULL)
- continue;
- if (!strcmp(chip->label, name))
- break;
- }
-
- return chip;
-}
-
#ifdef CONFIG_OF
static struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
- unsigned int idx, unsigned long *flags)
+ unsigned int idx,
+ enum gpio_lookup_flags *flags)
{
char prop_name[32]; /* 32 is max size of property name */
enum of_gpio_flags of_flags;
@@ -2297,20 +2296,22 @@ static struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
return desc;
if (of_flags & OF_GPIO_ACTIVE_LOW)
- *flags |= GPIOF_ACTIVE_LOW;
+ *flags |= GPIO_ACTIVE_LOW;
return desc;
}
#else
static struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
- unsigned int idx, unsigned long *flags)
+ unsigned int idx,
+ enum gpio_lookup_flags *flags)
{
return ERR_PTR(-ENODEV);
}
#endif
static struct gpio_desc *acpi_find_gpio(struct device *dev, const char *con_id,
- unsigned int idx, unsigned long *flags)
+ unsigned int idx,
+ enum gpio_lookup_flags *flags)
{
struct acpi_gpio_info info;
struct gpio_desc *desc;
@@ -2320,13 +2321,14 @@ static struct gpio_desc *acpi_find_gpio(struct device *dev, const char *con_id,
return desc;
if (info.gpioint && info.active_low)
- *flags |= GPIOF_ACTIVE_LOW;
+ *flags |= GPIO_ACTIVE_LOW;
return desc;
}
static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id,
- unsigned int idx, unsigned long *flags)
+ unsigned int idx,
+ enum gpio_lookup_flags *flags)
{
const char *dev_id = dev ? dev_name(dev) : NULL;
struct gpio_desc *desc = ERR_PTR(-ENODEV);
@@ -2418,7 +2420,7 @@ struct gpio_desc *__must_check gpiod_get_index(struct device *dev,
{
struct gpio_desc *desc;
int status;
- unsigned long flags = 0;
+ enum gpio_lookup_flags flags = 0;
dev_dbg(dev, "GPIO lookup for consumer %s\n", con_id);
@@ -2444,8 +2446,12 @@ struct gpio_desc *__must_check gpiod_get_index(struct device *dev,
if (status < 0)
return ERR_PTR(status);
- if (flags & GPIOF_ACTIVE_LOW)
+ if (flags & GPIO_ACTIVE_LOW)
set_bit(FLAG_ACTIVE_LOW, &desc->flags);
+ if (flags & GPIO_OPEN_DRAIN)
+ set_bit(FLAG_OPEN_DRAIN, &desc->flags);
+ if (flags & GPIO_OPEN_SOURCE)
+ set_bit(FLAG_OPEN_SOURCE, &desc->flags);
return desc;
}
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index bd2bca395792..c22c3097c3e8 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -516,7 +516,7 @@ int drm_sysfs_device_add(struct drm_minor *minor)
minor_str = "card%d";
minor->kdev = kzalloc(sizeof(*minor->kdev), GFP_KERNEL);
- if (!minor->dev) {
+ if (!minor->kdev) {
r = -ENOMEM;
goto error;
}
diff --git a/drivers/gpu/drm/nouveau/nouveau_hwmon.c b/drivers/gpu/drm/nouveau/nouveau_hwmon.c
index 38a4db5bfe21..4aff04fa483c 100644
--- a/drivers/gpu/drm/nouveau/nouveau_hwmon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_hwmon.c
@@ -630,7 +630,6 @@ error:
hwmon->hwmon = NULL;
return ret;
#else
- hwmon->hwmon = NULL;
return 0;
#endif
}
diff --git a/drivers/gpu/drm/qxl/qxl_release.c b/drivers/gpu/drm/qxl/qxl_release.c
index 0109a9644cb2..821ab7b9409b 100644
--- a/drivers/gpu/drm/qxl/qxl_release.c
+++ b/drivers/gpu/drm/qxl/qxl_release.c
@@ -92,6 +92,7 @@ qxl_release_free(struct qxl_device *qdev,
- DRM_FILE_OFFSET);
qxl_fence_remove_release(&bo->fence, release->id);
qxl_bo_unref(&bo);
+ kfree(entry);
}
spin_lock(&qdev->release_idr_lock);
idr_remove(&qdev->release_idr, release->id);
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 329fbb9b5976..34e2d39d4ce8 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -460,6 +460,7 @@ config HID_MULTITOUCH
- Stantum multitouch panels
- Touch International Panels
- Unitec Panels
+ - Wistron optical touch panels
- XAT optical touch panels
- Xiroku optical touch panels
- Zytronic touch panels
diff --git a/drivers/hid/hid-appleir.c b/drivers/hid/hid-appleir.c
index a42e6a394c5e..0e6a42d37eb6 100644
--- a/drivers/hid/hid-appleir.c
+++ b/drivers/hid/hid-appleir.c
@@ -297,6 +297,9 @@ static int appleir_probe(struct hid_device *hid, const struct hid_device_id *id)
appleir->hid = hid;
+ /* force input as some remotes bypass the input registration */
+ hid->quirks |= HID_QUIRK_HIDINPUT_FORCE;
+
spin_lock_init(&appleir->lock);
setup_timer(&appleir->key_up_timer,
key_up_tick, (unsigned long) appleir);
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 8c10f2742233..253fe23ef7fe 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1723,6 +1723,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KEYTOUCH, USB_DEVICE_ID_KEYTOUCH_IEC) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_MANTICORE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_GX_IMPERATOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_I405X) },
@@ -1879,7 +1880,6 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE) },
- { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO2, USB_DEVICE_ID_NINTENDO_WIIMOTE) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE2) },
{ }
};
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 76559629568c..f9304cb37154 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -489,6 +489,7 @@
#define USB_VENDOR_ID_KYE 0x0458
#define USB_DEVICE_ID_KYE_ERGO_525V 0x0087
#define USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE 0x0138
+#define USB_DEVICE_ID_GENIUS_MANTICORE 0x0153
#define USB_DEVICE_ID_GENIUS_GX_IMPERATOR 0x4018
#define USB_DEVICE_ID_KYE_GPEN_560 0x5003
#define USB_DEVICE_ID_KYE_EASYPEN_I405X 0x5010
@@ -640,7 +641,6 @@
#define USB_DEVICE_ID_NEXTWINDOW_TOUCHSCREEN 0x0003
#define USB_VENDOR_ID_NINTENDO 0x057e
-#define USB_VENDOR_ID_NINTENDO2 0x054c
#define USB_DEVICE_ID_NINTENDO_WIIMOTE 0x0306
#define USB_DEVICE_ID_NINTENDO_WIIMOTE2 0x0330
@@ -902,6 +902,9 @@
#define USB_DEVICE_ID_SUPER_DUAL_BOX_PRO 0x8802
#define USB_DEVICE_ID_SUPER_JOY_BOX_5_PRO 0x8804
+#define USB_VENDOR_ID_WISTRON 0x0fb8
+#define USB_DEVICE_ID_WISTRON_OPTICAL_TOUCH 0x1109
+
#define USB_VENDOR_ID_X_TENSIONS 0x1ae7
#define USB_DEVICE_ID_SPEEDLINK_VAD_CEZANNE 0x9001
diff --git a/drivers/hid/hid-kye.c b/drivers/hid/hid-kye.c
index 73845120295e..ecb5ca669e97 100644
--- a/drivers/hid/hid-kye.c
+++ b/drivers/hid/hid-kye.c
@@ -341,6 +341,9 @@ static __u8 *kye_report_fixup(struct hid_device *hdev, __u8 *rdesc,
case USB_DEVICE_ID_GENIUS_GX_IMPERATOR:
rdesc = kye_consumer_control_fixup(hdev, rdesc, rsize, 83,
"Genius Gx Imperator Keyboard");
+ case USB_DEVICE_ID_GENIUS_MANTICORE:
+ rdesc = kye_consumer_control_fixup(hdev, rdesc, rsize, 104,
+ "Genius Manticore Keyboard");
break;
}
return rdesc;
@@ -418,6 +421,14 @@ static int kye_probe(struct hid_device *hdev, const struct hid_device_id *id)
goto enabling_err;
}
break;
+ case USB_DEVICE_ID_GENIUS_MANTICORE:
+ /*
+ * The manticore keyboard needs to have all the interfaces
+ * opened at least once to be fully functional.
+ */
+ if (hid_hw_open(hdev))
+ hid_hw_close(hdev);
+ break;
}
return 0;
@@ -439,6 +450,8 @@ static const struct hid_device_id kye_devices[] = {
USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
USB_DEVICE_ID_GENIUS_GX_IMPERATOR) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_KYE,
+ USB_DEVICE_ID_GENIUS_MANTICORE) },
{ }
};
MODULE_DEVICE_TABLE(hid, kye_devices);
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index a2cedb8ae1c0..d83b1e8b505b 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -1335,6 +1335,12 @@ static const struct hid_device_id mt_devices[] = {
{ .driver_data = MT_CLS_NSMU,
MT_USB_DEVICE(USB_VENDOR_ID_UNITEC,
USB_DEVICE_ID_UNITEC_USB_TOUCH_0A19) },
+
+ /* Wistron panels */
+ { .driver_data = MT_CLS_NSMU,
+ MT_USB_DEVICE(USB_VENDOR_ID_WISTRON,
+ USB_DEVICE_ID_WISTRON_OPTICAL_TOUCH) },
+
/* XAT */
{ .driver_data = MT_CLS_NSMU,
MT_USB_DEVICE(USB_VENDOR_ID_XAT,
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index da551d113762..098af2f84b8c 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -225,6 +225,13 @@ static const unsigned int buzz_keymap[] = {
struct sony_sc {
unsigned long quirks;
+#ifdef CONFIG_SONY_FF
+ struct work_struct rumble_worker;
+ struct hid_device *hdev;
+ __u8 left;
+ __u8 right;
+#endif
+
void *extra;
};
@@ -615,9 +622,9 @@ static void buzz_remove(struct hid_device *hdev)
}
#ifdef CONFIG_SONY_FF
-static int sony_play_effect(struct input_dev *dev, void *data,
- struct ff_effect *effect)
+static void sony_rumble_worker(struct work_struct *work)
{
+ struct sony_sc *sc = container_of(work, struct sony_sc, rumble_worker);
unsigned char buf[] = {
0x01,
0x00, 0xff, 0x00, 0xff, 0x00,
@@ -628,21 +635,28 @@ static int sony_play_effect(struct input_dev *dev, void *data,
0xff, 0x27, 0x10, 0x00, 0x32,
0x00, 0x00, 0x00, 0x00, 0x00
};
- __u8 left;
- __u8 right;
+
+ buf[3] = sc->right;
+ buf[5] = sc->left;
+
+ sc->hdev->hid_output_raw_report(sc->hdev, buf, sizeof(buf),
+ HID_OUTPUT_REPORT);
+}
+
+static int sony_play_effect(struct input_dev *dev, void *data,
+ struct ff_effect *effect)
+{
struct hid_device *hid = input_get_drvdata(dev);
+ struct sony_sc *sc = hid_get_drvdata(hid);
if (effect->type != FF_RUMBLE)
return 0;
- left = effect->u.rumble.strong_magnitude / 256;
- right = effect->u.rumble.weak_magnitude ? 1 : 0;
-
- buf[3] = right;
- buf[5] = left;
+ sc->left = effect->u.rumble.strong_magnitude / 256;
+ sc->right = effect->u.rumble.weak_magnitude ? 1 : 0;
- return hid->hid_output_raw_report(hid, buf, sizeof(buf),
- HID_OUTPUT_REPORT);
+ schedule_work(&sc->rumble_worker);
+ return 0;
}
static int sony_init_ff(struct hid_device *hdev)
@@ -650,16 +664,31 @@ static int sony_init_ff(struct hid_device *hdev)
struct hid_input *hidinput = list_entry(hdev->inputs.next,
struct hid_input, list);
struct input_dev *input_dev = hidinput->input;
+ struct sony_sc *sc = hid_get_drvdata(hdev);
+
+ sc->hdev = hdev;
+ INIT_WORK(&sc->rumble_worker, sony_rumble_worker);
input_set_capability(input_dev, EV_FF, FF_RUMBLE);
return input_ff_create_memless(input_dev, NULL, sony_play_effect);
}
+static void sony_destroy_ff(struct hid_device *hdev)
+{
+ struct sony_sc *sc = hid_get_drvdata(hdev);
+
+ cancel_work_sync(&sc->rumble_worker);
+}
+
#else
static int sony_init_ff(struct hid_device *hdev)
{
return 0;
}
+
+static void sony_destroy_ff(struct hid_device *hdev)
+{
+}
#endif
static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
@@ -728,6 +757,8 @@ static void sony_remove(struct hid_device *hdev)
if (sc->quirks & BUZZ_CONTROLLER)
buzz_remove(hdev);
+ sony_destroy_ff(hdev);
+
hid_hw_stop(hdev);
}
diff --git a/drivers/hid/hid-wiimote-core.c b/drivers/hid/hid-wiimote-core.c
index 1446f526ee8b..abb20db2b443 100644
--- a/drivers/hid/hid-wiimote-core.c
+++ b/drivers/hid/hid-wiimote-core.c
@@ -834,8 +834,7 @@ static void wiimote_init_set_type(struct wiimote_data *wdata,
goto done;
}
- if (vendor == USB_VENDOR_ID_NINTENDO ||
- vendor == USB_VENDOR_ID_NINTENDO2) {
+ if (vendor == USB_VENDOR_ID_NINTENDO) {
if (product == USB_DEVICE_ID_NINTENDO_WIIMOTE) {
devtype = WIIMOTE_DEV_GEN10;
goto done;
@@ -1856,8 +1855,6 @@ static void wiimote_hid_remove(struct hid_device *hdev)
static const struct hid_device_id wiimote_hid_devices[] = {
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO,
USB_DEVICE_ID_NINTENDO_WIIMOTE) },
- { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO2,
- USB_DEVICE_ID_NINTENDO_WIIMOTE) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO,
USB_DEVICE_ID_NINTENDO_WIIMOTE2) },
{ }
diff --git a/drivers/hid/uhid.c b/drivers/hid/uhid.c
index 93b00d76374c..cedc6da93c19 100644
--- a/drivers/hid/uhid.c
+++ b/drivers/hid/uhid.c
@@ -287,7 +287,7 @@ static int uhid_event_from_user(const char __user *buffer, size_t len,
*/
struct uhid_create_req_compat *compat;
- compat = kmalloc(sizeof(*compat), GFP_KERNEL);
+ compat = kzalloc(sizeof(*compat), GFP_KERNEL);
if (!compat)
return -ENOMEM;
diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index 1d7ff46812c3..dafc63c6932d 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -18,7 +18,6 @@
#include <linux/err.h>
#include <acpi/acpi.h>
-#include <acpi/acpixf.h>
#include <acpi/acpi_drivers.h>
#include <acpi/acpi_bus.h>
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index a6a891d7970d..d76228d81d5f 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1037,6 +1037,20 @@ static const struct i2c_algorithm omap_i2c_algo = {
};
#ifdef CONFIG_OF
+static struct omap_i2c_bus_platform_data omap2420_pdata = {
+ .rev = OMAP_I2C_IP_VERSION_1,
+ .flags = OMAP_I2C_FLAG_NO_FIFO |
+ OMAP_I2C_FLAG_SIMPLE_CLOCK |
+ OMAP_I2C_FLAG_16BIT_DATA_REG |
+ OMAP_I2C_FLAG_BUS_SHIFT_2,
+};
+
+static struct omap_i2c_bus_platform_data omap2430_pdata = {
+ .rev = OMAP_I2C_IP_VERSION_1,
+ .flags = OMAP_I2C_FLAG_BUS_SHIFT_2 |
+ OMAP_I2C_FLAG_FORCE_19200_INT_CLK,
+};
+
static struct omap_i2c_bus_platform_data omap3_pdata = {
.rev = OMAP_I2C_IP_VERSION_1,
.flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
@@ -1055,6 +1069,14 @@ static const struct of_device_id omap_i2c_of_match[] = {
.compatible = "ti,omap3-i2c",
.data = &omap3_pdata,
},
+ {
+ .compatible = "ti,omap2430-i2c",
+ .data = &omap2430_pdata,
+ },
+ {
+ .compatible = "ti,omap2420-i2c",
+ .data = &omap2420_pdata,
+ },
{ },
};
MODULE_DEVICE_TABLE(of, omap_i2c_of_match);
diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c
index dcda17395c4e..1cae4e920c9b 100644
--- a/drivers/iio/accel/hid-sensor-accel-3d.c
+++ b/drivers/iio/accel/hid-sensor-accel-3d.c
@@ -350,7 +350,7 @@ static int hid_accel_3d_probe(struct platform_device *pdev)
error_iio_unreg:
iio_device_unregister(indio_dev);
error_remove_trigger:
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&accel_state->common_attributes);
error_unreg_buffer_funcs:
iio_triggered_buffer_cleanup(indio_dev);
error_free_dev_mem:
@@ -363,10 +363,11 @@ static int hid_accel_3d_remove(struct platform_device *pdev)
{
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct accel_3d_state *accel_state = iio_priv(indio_dev);
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ACCEL_3D);
iio_device_unregister(indio_dev);
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&accel_state->common_attributes);
iio_triggered_buffer_cleanup(indio_dev);
kfree(indio_dev->channels);
diff --git a/drivers/iio/accel/kxsd9.c b/drivers/iio/accel/kxsd9.c
index d72118d1189c..98ba761cbb9c 100644
--- a/drivers/iio/accel/kxsd9.c
+++ b/drivers/iio/accel/kxsd9.c
@@ -112,9 +112,10 @@ static int kxsd9_read(struct iio_dev *indio_dev, u8 address)
mutex_lock(&st->buf_lock);
st->tx[0] = KXSD9_READ(address);
ret = spi_sync_transfer(st->us, xfers, ARRAY_SIZE(xfers));
- if (ret)
- return ret;
- return (((u16)(st->rx[0])) << 8) | (st->rx[1] & 0xF0);
+ if (!ret)
+ ret = (((u16)(st->rx[0])) << 8) | (st->rx[1] & 0xF0);
+ mutex_unlock(&st->buf_lock);
+ return ret;
}
static IIO_CONST_ATTR(accel_scale_available,
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 17df74908db1..5b1aa027c034 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -1047,6 +1047,7 @@ static int at91_adc_probe(struct platform_device *pdev)
} else {
if (!st->caps->has_tsmr) {
dev_err(&pdev->dev, "We don't support non-TSMR adc\n");
+ ret = -ENODEV;
goto error_disable_adc_clk;
}
diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c
index 12948325431c..c8c1baaec6c1 100644
--- a/drivers/iio/adc/mcp3422.c
+++ b/drivers/iio/adc/mcp3422.c
@@ -88,10 +88,10 @@ static const int mcp3422_sample_rates[4] = {
/* sample rates to sign extension table */
static const int mcp3422_sign_extend[4] = {
- [MCP3422_SRATE_240] = 12,
- [MCP3422_SRATE_60] = 14,
- [MCP3422_SRATE_15] = 16,
- [MCP3422_SRATE_3] = 18 };
+ [MCP3422_SRATE_240] = 11,
+ [MCP3422_SRATE_60] = 13,
+ [MCP3422_SRATE_15] = 15,
+ [MCP3422_SRATE_3] = 17 };
/* Client data (each client gets its own) */
struct mcp3422 {
diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index 728411ec7642..d4d748214e4b 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -229,12 +229,15 @@ static int tiadc_iio_buffered_hardware_setup(struct iio_dev *indio_dev,
unsigned long flags,
const struct iio_buffer_setup_ops *setup_ops)
{
+ struct iio_buffer *buffer;
int ret;
- indio_dev->buffer = iio_kfifo_allocate(indio_dev);
- if (!indio_dev->buffer)
+ buffer = iio_kfifo_allocate(indio_dev);
+ if (!buffer)
return -ENOMEM;
+ iio_device_attach_buffer(indio_dev, buffer);
+
ret = request_threaded_irq(irq, pollfunc_th, pollfunc_bh,
flags, indio_dev->name, indio_dev);
if (ret)
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
index b6e77e0fc420..bbd6426c9726 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
@@ -55,11 +55,10 @@ static int hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig,
return 0;
}
-void hid_sensor_remove_trigger(struct iio_dev *indio_dev)
+void hid_sensor_remove_trigger(struct hid_sensor_common *attrb)
{
- iio_trigger_unregister(indio_dev->trig);
- iio_trigger_free(indio_dev->trig);
- indio_dev->trig = NULL;
+ iio_trigger_unregister(attrb->trigger);
+ iio_trigger_free(attrb->trigger);
}
EXPORT_SYMBOL(hid_sensor_remove_trigger);
@@ -90,7 +89,7 @@ int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
dev_err(&indio_dev->dev, "Trigger Register Failed\n");
goto error_free_trig;
}
- indio_dev->trig = trig;
+ indio_dev->trig = attrb->trigger = trig;
return ret;
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.h b/drivers/iio/common/hid-sensors/hid-sensor-trigger.h
index 9a8731478eda..ca02f7811aa8 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.h
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.h
@@ -21,6 +21,6 @@
int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
struct hid_sensor_common *attrb);
-void hid_sensor_remove_trigger(struct iio_dev *indio_dev);
+void hid_sensor_remove_trigger(struct hid_sensor_common *attrb);
#endif
diff --git a/drivers/iio/gyro/hid-sensor-gyro-3d.c b/drivers/iio/gyro/hid-sensor-gyro-3d.c
index ea01c6bcfb56..e54f0f4959d3 100644
--- a/drivers/iio/gyro/hid-sensor-gyro-3d.c
+++ b/drivers/iio/gyro/hid-sensor-gyro-3d.c
@@ -348,7 +348,7 @@ static int hid_gyro_3d_probe(struct platform_device *pdev)
error_iio_unreg:
iio_device_unregister(indio_dev);
error_remove_trigger:
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&gyro_state->common_attributes);
error_unreg_buffer_funcs:
iio_triggered_buffer_cleanup(indio_dev);
error_free_dev_mem:
@@ -361,10 +361,11 @@ static int hid_gyro_3d_remove(struct platform_device *pdev)
{
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D);
iio_device_unregister(indio_dev);
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&gyro_state->common_attributes);
iio_triggered_buffer_cleanup(indio_dev);
kfree(indio_dev->channels);
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index f98c2b509254..b0d65df3ede2 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -81,6 +81,8 @@ config SENSORS_LM3533
config TCS3472
tristate "TAOS TCS3472 color light-to-digital converter"
depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
help
If you say yes here you get support for the TAOS TCS3472
family of color light-to-digital converters with IR filter.
diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c
index fa6ae8cf89ea..8e8b9d722853 100644
--- a/drivers/iio/light/hid-sensor-als.c
+++ b/drivers/iio/light/hid-sensor-als.c
@@ -314,7 +314,7 @@ static int hid_als_probe(struct platform_device *pdev)
error_iio_unreg:
iio_device_unregister(indio_dev);
error_remove_trigger:
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&als_state->common_attributes);
error_unreg_buffer_funcs:
iio_triggered_buffer_cleanup(indio_dev);
error_free_dev_mem:
@@ -327,10 +327,11 @@ static int hid_als_remove(struct platform_device *pdev)
{
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct als_state *als_state = iio_priv(indio_dev);
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ALS);
iio_device_unregister(indio_dev);
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&als_state->common_attributes);
iio_triggered_buffer_cleanup(indio_dev);
kfree(indio_dev->channels);
diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
index 0cf09637b35b..d86d226dcd67 100644
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@@ -19,6 +19,8 @@ config AK8975
config MAG3110
tristate "Freescale MAG3110 3-Axis Magnetometer"
depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for the Freescale MAG3110 3-Axis
magnetometer.
diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
index 2634920562fb..b26e1028a0a0 100644
--- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
+++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
@@ -351,7 +351,7 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
error_iio_unreg:
iio_device_unregister(indio_dev);
error_remove_trigger:
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&magn_state->common_attributes);
error_unreg_buffer_funcs:
iio_triggered_buffer_cleanup(indio_dev);
error_free_dev_mem:
@@ -364,10 +364,11 @@ static int hid_magn_3d_remove(struct platform_device *pdev)
{
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct magn_3d_state *magn_state = iio_priv(indio_dev);
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D);
iio_device_unregister(indio_dev);
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&magn_state->common_attributes);
iio_triggered_buffer_cleanup(indio_dev);
kfree(indio_dev->channels);
diff --git a/drivers/iio/magnetometer/mag3110.c b/drivers/iio/magnetometer/mag3110.c
index 783c5b417356..becf54496967 100644
--- a/drivers/iio/magnetometer/mag3110.c
+++ b/drivers/iio/magnetometer/mag3110.c
@@ -250,7 +250,12 @@ done:
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
BIT(IIO_CHAN_INFO_SCALE), \
.scan_index = idx, \
- .scan_type = IIO_ST('s', 16, 16, IIO_BE), \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_BE, \
+ }, \
}
static const struct iio_chan_spec mag3110_channels[] = {
diff --git a/drivers/input/misc/hp_sdc_rtc.c b/drivers/input/misc/hp_sdc_rtc.c
index 86b822806e95..45e0e3e55de2 100644
--- a/drivers/input/misc/hp_sdc_rtc.c
+++ b/drivers/input/misc/hp_sdc_rtc.c
@@ -180,7 +180,10 @@ static int64_t hp_sdc_rtc_read_i8042timer (uint8_t loadcmd, int numreg)
if (WARN_ON(down_interruptible(&i8042tregs)))
return -1;
- if (hp_sdc_enqueue_transaction(&t)) return -1;
+ if (hp_sdc_enqueue_transaction(&t)) {
+ up(&i8042tregs);
+ return -1;
+ }
/* Sleep until results come back. */
if (WARN_ON(down_interruptible(&i8042tregs)))
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 00d1e547b211..961d58d32647 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -906,6 +906,17 @@ config TOUCHSCREEN_STMPE
To compile this driver as a module, choose M here: the
module will be called stmpe-ts.
+config TOUCHSCREEN_SUR40
+ tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
+ depends on USB
+ select INPUT_POLLDEV
+ help
+ Say Y here if you want support for the Samsung SUR40 touchscreen
+ (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
+
+ To compile this driver as a module, choose M here: the
+ module will be called sur40.
+
config TOUCHSCREEN_TPS6507X
tristate "TPS6507x based touchscreens"
depends on I2C
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 7587883b8d38..62801f213346 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_TOUCHSCREEN_PIXCIR) += pixcir_i2c_ts.o
obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o
obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o
obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o
+obj-$(CONFIG_TOUCHSCREEN_SUR40) += sur40.o
obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC) += ti_am335x_tsc.o
obj-$(CONFIG_TOUCHSCREEN_TNETV107X) += tnetv107x-ts.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o
diff --git a/drivers/input/touchscreen/atmel-wm97xx.c b/drivers/input/touchscreen/atmel-wm97xx.c
index 268a35e55d7f..279c0e42b8a7 100644
--- a/drivers/input/touchscreen/atmel-wm97xx.c
+++ b/drivers/input/touchscreen/atmel-wm97xx.c
@@ -391,7 +391,7 @@ static int __exit atmel_wm97xx_remove(struct platform_device *pdev)
}
#ifdef CONFIG_PM_SLEEP
-static int atmel_wm97xx_suspend(struct *dev)
+static int atmel_wm97xx_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(pdev);
diff --git a/drivers/input/touchscreen/cyttsp4_core.c b/drivers/input/touchscreen/cyttsp4_core.c
index 42d830efa316..a035a390f8e2 100644
--- a/drivers/input/touchscreen/cyttsp4_core.c
+++ b/drivers/input/touchscreen/cyttsp4_core.c
@@ -1246,8 +1246,7 @@ static void cyttsp4_watchdog_timer(unsigned long handle)
dev_vdbg(cd->dev, "%s: Watchdog timer triggered\n", __func__);
- if (!work_pending(&cd->watchdog_work))
- schedule_work(&cd->watchdog_work);
+ schedule_work(&cd->watchdog_work);
return;
}
diff --git a/drivers/input/touchscreen/sur40.c b/drivers/input/touchscreen/sur40.c
new file mode 100644
index 000000000000..cfd1b7e8c001
--- /dev/null
+++ b/drivers/input/touchscreen/sur40.c
@@ -0,0 +1,466 @@
+/*
+ * Surface2.0/SUR40/PixelSense input driver
+ *
+ * Copyright (c) 2013 by Florian 'floe' Echtler <floe@butterbrot.org>
+ *
+ * Derived from the USB Skeleton driver 1.1,
+ * Copyright (c) 2003 Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * and from the Apple USB BCM5974 multitouch driver,
+ * Copyright (c) 2008 Henrik Rydberg (rydberg@euromail.se)
+ *
+ * and from the generic hid-multitouch driver,
+ * Copyright (c) 2010-2012 Stephane Chatty <chatty@enac.fr>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/completion.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/printk.h>
+#include <linux/input-polldev.h>
+#include <linux/input/mt.h>
+#include <linux/usb/input.h>
+
+/* read 512 bytes from endpoint 0x86 -> get header + blobs */
+struct sur40_header {
+
+ __le16 type; /* always 0x0001 */
+ __le16 count; /* count of blobs (if 0: continue prev. packet) */
+
+ __le32 packet_id; /* unique ID for all packets in one frame */
+
+ __le32 timestamp; /* milliseconds (inc. by 16 or 17 each frame) */
+ __le32 unknown; /* "epoch?" always 02/03 00 00 00 */
+
+} __packed;
+
+struct sur40_blob {
+
+ __le16 blob_id;
+
+ u8 action; /* 0x02 = enter/exit, 0x03 = update (?) */
+ u8 unknown; /* always 0x01 or 0x02 (no idea what this is?) */
+
+ __le16 bb_pos_x; /* upper left corner of bounding box */
+ __le16 bb_pos_y;
+
+ __le16 bb_size_x; /* size of bounding box */
+ __le16 bb_size_y;
+
+ __le16 pos_x; /* finger tip position */
+ __le16 pos_y;
+
+ __le16 ctr_x; /* centroid position */
+ __le16 ctr_y;
+
+ __le16 axis_x; /* somehow related to major/minor axis, mostly: */
+ __le16 axis_y; /* axis_x == bb_size_y && axis_y == bb_size_x */
+
+ __le32 angle; /* orientation in radians relative to x axis -
+ actually an IEEE754 float, don't use in kernel */
+
+ __le32 area; /* size in pixels/pressure (?) */
+
+ u8 padding[32];
+
+} __packed;
+
+/* combined header/blob data */
+struct sur40_data {
+ struct sur40_header header;
+ struct sur40_blob blobs[];
+} __packed;
+
+
+/* version information */
+#define DRIVER_SHORT "sur40"
+#define DRIVER_AUTHOR "Florian 'floe' Echtler <floe@butterbrot.org>"
+#define DRIVER_DESC "Surface2.0/SUR40/PixelSense input driver"
+
+/* vendor and device IDs */
+#define ID_MICROSOFT 0x045e
+#define ID_SUR40 0x0775
+
+/* sensor resolution */
+#define SENSOR_RES_X 1920
+#define SENSOR_RES_Y 1080
+
+/* touch data endpoint */
+#define TOUCH_ENDPOINT 0x86
+
+/* polling interval (ms) */
+#define POLL_INTERVAL 10
+
+/* maximum number of contacts FIXME: this is a guess? */
+#define MAX_CONTACTS 64
+
+/* control commands */
+#define SUR40_GET_VERSION 0xb0 /* 12 bytes string */
+#define SUR40_UNKNOWN1 0xb3 /* 5 bytes */
+#define SUR40_UNKNOWN2 0xc1 /* 24 bytes */
+
+#define SUR40_GET_STATE 0xc5 /* 4 bytes state (?) */
+#define SUR40_GET_SENSORS 0xb1 /* 8 bytes sensors */
+
+/*
+ * Note: an earlier, non-public version of this driver used USB_RECIP_ENDPOINT
+ * here by mistake which is very likely to have corrupted the firmware EEPROM
+ * on two separate SUR40 devices. Thanks to Alan Stern who spotted this bug.
+ * Should you ever run into a similar problem, the background story to this
+ * incident and instructions on how to fix the corrupted EEPROM are available
+ * at https://floe.butterbrot.org/matrix/hacking/surface/brick.html
+*/
+
+struct sur40_state {
+
+ struct usb_device *usbdev;
+ struct device *dev;
+ struct input_polled_dev *input;
+
+ struct sur40_data *bulk_in_buffer;
+ size_t bulk_in_size;
+ u8 bulk_in_epaddr;
+
+ char phys[64];
+};
+
+static int sur40_command(struct sur40_state *dev,
+ u8 command, u16 index, void *buffer, u16 size)
+{
+ return usb_control_msg(dev->usbdev, usb_rcvctrlpipe(dev->usbdev, 0),
+ command,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ 0x00, index, buffer, size, 1000);
+}
+
+/* Initialization routine, called from sur40_open */
+static int sur40_init(struct sur40_state *dev)
+{
+ int result;
+ u8 buffer[24];
+
+ /* stupidly replay the original MS driver init sequence */
+ result = sur40_command(dev, SUR40_GET_VERSION, 0x00, buffer, 12);
+ if (result < 0)
+ return result;
+
+ result = sur40_command(dev, SUR40_GET_VERSION, 0x01, buffer, 12);
+ if (result < 0)
+ return result;
+
+ result = sur40_command(dev, SUR40_GET_VERSION, 0x02, buffer, 12);
+ if (result < 0)
+ return result;
+
+ result = sur40_command(dev, SUR40_UNKNOWN2, 0x00, buffer, 24);
+ if (result < 0)
+ return result;
+
+ result = sur40_command(dev, SUR40_UNKNOWN1, 0x00, buffer, 5);
+ if (result < 0)
+ return result;
+
+ result = sur40_command(dev, SUR40_GET_VERSION, 0x03, buffer, 12);
+
+ /*
+ * Discard the result buffer - no known data inside except
+ * some version strings, maybe extract these sometime...
+ */
+
+ return result;
+}
+
+/*
+ * Callback routines from input_polled_dev
+ */
+
+/* Enable the device, polling will now start. */
+static void sur40_open(struct input_polled_dev *polldev)
+{
+ struct sur40_state *sur40 = polldev->private;
+
+ dev_dbg(sur40->dev, "open\n");
+ sur40_init(sur40);
+}
+
+/* Disable device, polling has stopped. */
+static void sur40_close(struct input_polled_dev *polldev)
+{
+ struct sur40_state *sur40 = polldev->private;
+
+ dev_dbg(sur40->dev, "close\n");
+ /*
+ * There is no known way to stop the device, so we simply
+ * stop polling.
+ */
+}
+
+/*
+ * This function is called when a whole contact has been processed,
+ * so that it can assign it to a slot and store the data there.
+ */
+static void sur40_report_blob(struct sur40_blob *blob, struct input_dev *input)
+{
+ int wide, major, minor;
+
+ int bb_size_x = le16_to_cpu(blob->bb_size_x);
+ int bb_size_y = le16_to_cpu(blob->bb_size_y);
+
+ int pos_x = le16_to_cpu(blob->pos_x);
+ int pos_y = le16_to_cpu(blob->pos_y);
+
+ int ctr_x = le16_to_cpu(blob->ctr_x);
+ int ctr_y = le16_to_cpu(blob->ctr_y);
+
+ int slotnum = input_mt_get_slot_by_key(input, blob->blob_id);
+ if (slotnum < 0 || slotnum >= MAX_CONTACTS)
+ return;
+
+ input_mt_slot(input, slotnum);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER, 1);
+ wide = (bb_size_x > bb_size_y);
+ major = max(bb_size_x, bb_size_y);
+ minor = min(bb_size_x, bb_size_y);
+
+ input_report_abs(input, ABS_MT_POSITION_X, pos_x);
+ input_report_abs(input, ABS_MT_POSITION_Y, pos_y);
+ input_report_abs(input, ABS_MT_TOOL_X, ctr_x);
+ input_report_abs(input, ABS_MT_TOOL_Y, ctr_y);
+
+ /* TODO: use a better orientation measure */
+ input_report_abs(input, ABS_MT_ORIENTATION, wide);
+ input_report_abs(input, ABS_MT_TOUCH_MAJOR, major);
+ input_report_abs(input, ABS_MT_TOUCH_MINOR, minor);
+}
+
+/* core function: poll for new input data */
+static void sur40_poll(struct input_polled_dev *polldev)
+{
+
+ struct sur40_state *sur40 = polldev->private;
+ struct input_dev *input = polldev->input;
+ int result, bulk_read, need_blobs, packet_blobs, i;
+ u32 packet_id;
+
+ struct sur40_header *header = &sur40->bulk_in_buffer->header;
+ struct sur40_blob *inblob = &sur40->bulk_in_buffer->blobs[0];
+
+ dev_dbg(sur40->dev, "poll\n");
+
+ need_blobs = -1;
+
+ do {
+
+ /* perform a blocking bulk read to get data from the device */
+ result = usb_bulk_msg(sur40->usbdev,
+ usb_rcvbulkpipe(sur40->usbdev, sur40->bulk_in_epaddr),
+ sur40->bulk_in_buffer, sur40->bulk_in_size,
+ &bulk_read, 1000);
+
+ dev_dbg(sur40->dev, "received %d bytes\n", bulk_read);
+
+ if (result < 0) {
+ dev_err(sur40->dev, "error in usb_bulk_read\n");
+ return;
+ }
+
+ result = bulk_read - sizeof(struct sur40_header);
+
+ if (result % sizeof(struct sur40_blob) != 0) {
+ dev_err(sur40->dev, "transfer size mismatch\n");
+ return;
+ }
+
+ /* first packet? */
+ if (need_blobs == -1) {
+ need_blobs = le16_to_cpu(header->count);
+ dev_dbg(sur40->dev, "need %d blobs\n", need_blobs);
+ packet_id = header->packet_id;
+ }
+
+ /*
+ * Sanity check. when video data is also being retrieved, the
+ * packet ID will usually increase in the middle of a series
+ * instead of at the end.
+ */
+ if (packet_id != header->packet_id)
+ dev_warn(sur40->dev, "packet ID mismatch\n");
+
+ packet_blobs = result / sizeof(struct sur40_blob);
+ dev_dbg(sur40->dev, "received %d blobs\n", packet_blobs);
+
+ /* packets always contain at least 4 blobs, even if empty */
+ if (packet_blobs > need_blobs)
+ packet_blobs = need_blobs;
+
+ for (i = 0; i < packet_blobs; i++) {
+ need_blobs--;
+ dev_dbg(sur40->dev, "processing blob\n");
+ sur40_report_blob(&(inblob[i]), input);
+ }
+
+ } while (need_blobs > 0);
+
+ input_mt_sync_frame(input);
+ input_sync(input);
+}
+
+/* Initialize input device parameters. */
+static void sur40_input_setup(struct input_dev *input_dev)
+{
+ __set_bit(EV_KEY, input_dev->evbit);
+ __set_bit(EV_ABS, input_dev->evbit);
+
+ input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+ 0, SENSOR_RES_X, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+ 0, SENSOR_RES_Y, 0, 0);
+
+ input_set_abs_params(input_dev, ABS_MT_TOOL_X,
+ 0, SENSOR_RES_X, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_TOOL_Y,
+ 0, SENSOR_RES_Y, 0, 0);
+
+ /* max value unknown, but major/minor axis
+ * can never be larger than screen */
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+ 0, SENSOR_RES_X, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR,
+ 0, SENSOR_RES_Y, 0, 0);
+
+ input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0);
+
+ input_mt_init_slots(input_dev, MAX_CONTACTS,
+ INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+}
+
+/* Check candidate USB interface. */
+static int sur40_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *usbdev = interface_to_usbdev(interface);
+ struct sur40_state *sur40;
+ struct usb_host_interface *iface_desc;
+ struct usb_endpoint_descriptor *endpoint;
+ struct input_polled_dev *poll_dev;
+ int error;
+
+ /* Check if we really have the right interface. */
+ iface_desc = &interface->altsetting[0];
+ if (iface_desc->desc.bInterfaceClass != 0xFF)
+ return -ENODEV;
+
+ /* Use endpoint #4 (0x86). */
+ endpoint = &iface_desc->endpoint[4].desc;
+ if (endpoint->bEndpointAddress != TOUCH_ENDPOINT)
+ return -ENODEV;
+
+ /* Allocate memory for our device state and initialize it. */
+ sur40 = kzalloc(sizeof(struct sur40_state), GFP_KERNEL);
+ if (!sur40)
+ return -ENOMEM;
+
+ poll_dev = input_allocate_polled_device();
+ if (!poll_dev) {
+ error = -ENOMEM;
+ goto err_free_dev;
+ }
+
+ /* Set up polled input device control structure */
+ poll_dev->private = sur40;
+ poll_dev->poll_interval = POLL_INTERVAL;
+ poll_dev->open = sur40_open;
+ poll_dev->poll = sur40_poll;
+ poll_dev->close = sur40_close;
+
+ /* Set up regular input device structure */
+ sur40_input_setup(poll_dev->input);
+
+ poll_dev->input->name = "Samsung SUR40";
+ usb_to_input_id(usbdev, &poll_dev->input->id);
+ usb_make_path(usbdev, sur40->phys, sizeof(sur40->phys));
+ strlcat(sur40->phys, "/input0", sizeof(sur40->phys));
+ poll_dev->input->phys = sur40->phys;
+ poll_dev->input->dev.parent = &interface->dev;
+
+ sur40->usbdev = usbdev;
+ sur40->dev = &interface->dev;
+ sur40->input = poll_dev;
+
+ /* use the bulk-in endpoint tested above */
+ sur40->bulk_in_size = usb_endpoint_maxp(endpoint);
+ sur40->bulk_in_epaddr = endpoint->bEndpointAddress;
+ sur40->bulk_in_buffer = kmalloc(sur40->bulk_in_size, GFP_KERNEL);
+ if (!sur40->bulk_in_buffer) {
+ dev_err(&interface->dev, "Unable to allocate input buffer.");
+ error = -ENOMEM;
+ goto err_free_polldev;
+ }
+
+ error = input_register_polled_device(poll_dev);
+ if (error) {
+ dev_err(&interface->dev,
+ "Unable to register polled input device.");
+ goto err_free_buffer;
+ }
+
+ /* we can register the device now, as it is ready */
+ usb_set_intfdata(interface, sur40);
+ dev_dbg(&interface->dev, "%s is now attached\n", DRIVER_DESC);
+
+ return 0;
+
+err_free_buffer:
+ kfree(sur40->bulk_in_buffer);
+err_free_polldev:
+ input_free_polled_device(sur40->input);
+err_free_dev:
+ kfree(sur40);
+
+ return error;
+}
+
+/* Unregister device & clean up. */
+static void sur40_disconnect(struct usb_interface *interface)
+{
+ struct sur40_state *sur40 = usb_get_intfdata(interface);
+
+ input_unregister_polled_device(sur40->input);
+ input_free_polled_device(sur40->input);
+ kfree(sur40->bulk_in_buffer);
+ kfree(sur40);
+
+ usb_set_intfdata(interface, NULL);
+ dev_dbg(&interface->dev, "%s is now disconnected\n", DRIVER_DESC);
+}
+
+static const struct usb_device_id sur40_table[] = {
+ { USB_DEVICE(ID_MICROSOFT, ID_SUR40) }, /* Samsung SUR40 */
+ { } /* terminating null entry */
+};
+MODULE_DEVICE_TABLE(usb, sur40_table);
+
+/* USB-specific object needed to register this driver with the USB subsystem. */
+static struct usb_driver sur40_driver = {
+ .name = DRIVER_SHORT,
+ .probe = sur40_probe,
+ .disconnect = sur40_disconnect,
+ .id_table = sur40_table,
+};
+
+module_usb_driver(sur40_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile
index 6753b65f8ede..d2f0120bc878 100644
--- a/drivers/macintosh/Makefile
+++ b/drivers/macintosh/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_WINDFARM_RM31) += windfarm_fcu_controls.o \
windfarm_ad7417_sensor.o \
windfarm_lm75_sensor.o \
windfarm_lm87_sensor.o \
+ windfarm_max6690_sensor.o \
windfarm_pid.o \
windfarm_cpufreq_clamp.o \
windfarm_rm31.o
diff --git a/drivers/md/md.c b/drivers/md/md.c
index b6b7a2866c9e..e60cebf3f519 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7777,7 +7777,7 @@ void md_check_recovery(struct mddev *mddev)
if (mddev->ro && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
return;
if ( ! (
- (mddev->flags & ~ (1<<MD_CHANGE_PENDING)) ||
+ (mddev->flags & MD_UPDATE_SB_FLAGS & ~ (1<<MD_CHANGE_PENDING)) ||
test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) ||
test_bit(MD_RECOVERY_DONE, &mddev->recovery) ||
(mddev->external == 0 && mddev->safemode == 1) ||
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 47da0af6322b..cc055da02e2a 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -678,26 +678,23 @@ get_active_stripe(struct r5conf *conf, sector_t sector,
} else
init_stripe(sh, sector, previous);
} else {
+ spin_lock(&conf->device_lock);
if (atomic_read(&sh->count)) {
BUG_ON(!list_empty(&sh->lru)
&& !test_bit(STRIPE_EXPANDING, &sh->state)
&& !test_bit(STRIPE_ON_UNPLUG_LIST, &sh->state)
- && !test_bit(STRIPE_ON_RELEASE_LIST, &sh->state));
+ );
} else {
- spin_lock(&conf->device_lock);
if (!test_bit(STRIPE_HANDLE, &sh->state))
atomic_inc(&conf->active_stripes);
- if (list_empty(&sh->lru) &&
- !test_bit(STRIPE_ON_RELEASE_LIST, &sh->state) &&
- !test_bit(STRIPE_EXPANDING, &sh->state))
- BUG();
+ BUG_ON(list_empty(&sh->lru));
list_del_init(&sh->lru);
if (sh->group) {
sh->group->stripes_cnt--;
sh->group = NULL;
}
- spin_unlock(&conf->device_lock);
}
+ spin_unlock(&conf->device_lock);
}
} while (sh == NULL);
@@ -5471,7 +5468,7 @@ static int alloc_thread_groups(struct r5conf *conf, int cnt,
for (i = 0; i < *group_cnt; i++) {
struct r5worker_group *group;
- group = worker_groups[i];
+ group = &(*worker_groups)[i];
INIT_LIST_HEAD(&group->handle_list);
group->conf = conf;
group->workers = workers + i * cnt;
diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c
index 1cb6e51e6bda..170e8e60cdb7 100644
--- a/drivers/ntb/ntb_hw.c
+++ b/drivers/ntb/ntb_hw.c
@@ -141,6 +141,24 @@ void ntb_unregister_event_callback(struct ntb_device *ndev)
ndev->event_cb = NULL;
}
+static void ntb_irq_work(unsigned long data)
+{
+ struct ntb_db_cb *db_cb = (struct ntb_db_cb *)data;
+ int rc;
+
+ rc = db_cb->callback(db_cb->data, db_cb->db_num);
+ if (rc)
+ tasklet_schedule(&db_cb->irq_work);
+ else {
+ struct ntb_device *ndev = db_cb->ndev;
+ unsigned long mask;
+
+ mask = readw(ndev->reg_ofs.ldb_mask);
+ clear_bit(db_cb->db_num * ndev->bits_per_vector, &mask);
+ writew(mask, ndev->reg_ofs.ldb_mask);
+ }
+}
+
/**
* ntb_register_db_callback() - register a callback for doorbell interrupt
* @ndev: pointer to ntb_device instance
@@ -155,7 +173,7 @@ void ntb_unregister_event_callback(struct ntb_device *ndev)
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
int ntb_register_db_callback(struct ntb_device *ndev, unsigned int idx,
- void *data, void (*func)(void *data, int db_num))
+ void *data, int (*func)(void *data, int db_num))
{
unsigned long mask;
@@ -166,6 +184,10 @@ int ntb_register_db_callback(struct ntb_device *ndev, unsigned int idx,
ndev->db_cb[idx].callback = func;
ndev->db_cb[idx].data = data;
+ ndev->db_cb[idx].ndev = ndev;
+
+ tasklet_init(&ndev->db_cb[idx].irq_work, ntb_irq_work,
+ (unsigned long) &ndev->db_cb[idx]);
/* unmask interrupt */
mask = readw(ndev->reg_ofs.ldb_mask);
@@ -194,6 +216,8 @@ void ntb_unregister_db_callback(struct ntb_device *ndev, unsigned int idx)
set_bit(idx * ndev->bits_per_vector, &mask);
writew(mask, ndev->reg_ofs.ldb_mask);
+ tasklet_disable(&ndev->db_cb[idx].irq_work);
+
ndev->db_cb[idx].callback = NULL;
}
@@ -678,6 +702,7 @@ static int ntb_xeon_setup(struct ntb_device *ndev)
return -EINVAL;
ndev->limits.max_mw = SNB_ERRATA_MAX_MW;
+ ndev->limits.max_db_bits = SNB_MAX_DB_BITS;
ndev->reg_ofs.spad_write = ndev->mw[1].vbase +
SNB_SPAD_OFFSET;
ndev->reg_ofs.rdb = ndev->mw[1].vbase +
@@ -688,8 +713,21 @@ static int ntb_xeon_setup(struct ntb_device *ndev)
*/
writeq(ndev->mw[1].bar_sz + 0x1000, ndev->reg_base +
SNB_PBAR4LMT_OFFSET);
+ /* HW errata on the Limit registers. They can only be
+ * written when the base register is 4GB aligned and
+ * < 32bit. This should already be the case based on the
+ * driver defaults, but write the Limit registers first
+ * just in case.
+ */
} else {
ndev->limits.max_mw = SNB_MAX_MW;
+
+ /* HW Errata on bit 14 of b2bdoorbell register. Writes
+ * will not be mirrored to the remote system. Shrink
+ * the number of bits by one, since bit 14 is the last
+ * bit.
+ */
+ ndev->limits.max_db_bits = SNB_MAX_DB_BITS - 1;
ndev->reg_ofs.spad_write = ndev->reg_base +
SNB_B2B_SPAD_OFFSET;
ndev->reg_ofs.rdb = ndev->reg_base +
@@ -699,6 +737,12 @@ static int ntb_xeon_setup(struct ntb_device *ndev)
* something silly
*/
writeq(0, ndev->reg_base + SNB_PBAR4LMT_OFFSET);
+ /* HW errata on the Limit registers. They can only be
+ * written when the base register is 4GB aligned and
+ * < 32bit. This should already be the case based on the
+ * driver defaults, but write the Limit registers first
+ * just in case.
+ */
}
/* The Xeon errata workaround requires setting SBAR Base
@@ -769,6 +813,7 @@ static int ntb_xeon_setup(struct ntb_device *ndev)
* have an equal amount.
*/
ndev->limits.max_spads = SNB_MAX_COMPAT_SPADS / 2;
+ ndev->limits.max_db_bits = SNB_MAX_DB_BITS;
/* Note: The SDOORBELL is the cause of the errata. You REALLY
* don't want to touch it.
*/
@@ -793,6 +838,7 @@ static int ntb_xeon_setup(struct ntb_device *ndev)
* have an equal amount.
*/
ndev->limits.max_spads = SNB_MAX_COMPAT_SPADS / 2;
+ ndev->limits.max_db_bits = SNB_MAX_DB_BITS;
ndev->reg_ofs.rdb = ndev->reg_base + SNB_PDOORBELL_OFFSET;
ndev->reg_ofs.ldb = ndev->reg_base + SNB_SDOORBELL_OFFSET;
ndev->reg_ofs.ldb_mask = ndev->reg_base + SNB_SDBMSK_OFFSET;
@@ -819,7 +865,6 @@ static int ntb_xeon_setup(struct ntb_device *ndev)
ndev->reg_ofs.lnk_stat = ndev->reg_base + SNB_SLINK_STATUS_OFFSET;
ndev->reg_ofs.spci_cmd = ndev->reg_base + SNB_PCICMD_OFFSET;
- ndev->limits.max_db_bits = SNB_MAX_DB_BITS;
ndev->limits.msix_cnt = SNB_MSIX_CNT;
ndev->bits_per_vector = SNB_DB_BITS_PER_VEC;
@@ -934,12 +979,16 @@ static irqreturn_t bwd_callback_msix_irq(int irq, void *data)
{
struct ntb_db_cb *db_cb = data;
struct ntb_device *ndev = db_cb->ndev;
+ unsigned long mask;
dev_dbg(&ndev->pdev->dev, "MSI-X irq %d received for DB %d\n", irq,
db_cb->db_num);
- if (db_cb->callback)
- db_cb->callback(db_cb->data, db_cb->db_num);
+ mask = readw(ndev->reg_ofs.ldb_mask);
+ set_bit(db_cb->db_num * ndev->bits_per_vector, &mask);
+ writew(mask, ndev->reg_ofs.ldb_mask);
+
+ tasklet_schedule(&db_cb->irq_work);
/* No need to check for the specific HB irq, any interrupt means
* we're connected.
@@ -955,12 +1004,16 @@ static irqreturn_t xeon_callback_msix_irq(int irq, void *data)
{
struct ntb_db_cb *db_cb = data;
struct ntb_device *ndev = db_cb->ndev;
+ unsigned long mask;
dev_dbg(&ndev->pdev->dev, "MSI-X irq %d received for DB %d\n", irq,
db_cb->db_num);
- if (db_cb->callback)
- db_cb->callback(db_cb->data, db_cb->db_num);
+ mask = readw(ndev->reg_ofs.ldb_mask);
+ set_bit(db_cb->db_num * ndev->bits_per_vector, &mask);
+ writew(mask, ndev->reg_ofs.ldb_mask);
+
+ tasklet_schedule(&db_cb->irq_work);
/* On Sandybridge, there are 16 bits in the interrupt register
* but only 4 vectors. So, 5 bits are assigned to the first 3
@@ -986,7 +1039,7 @@ static irqreturn_t xeon_event_msix_irq(int irq, void *dev)
dev_err(&ndev->pdev->dev, "Error determining link status\n");
/* bit 15 is always the link bit */
- writew(1 << ndev->limits.max_db_bits, ndev->reg_ofs.ldb);
+ writew(1 << SNB_LINK_DB, ndev->reg_ofs.ldb);
return IRQ_HANDLED;
}
@@ -1075,6 +1128,10 @@ static int ntb_setup_msix(struct ntb_device *ndev)
"Only %d MSI-X vectors. Limiting the number of queues to that number.\n",
rc);
msix_entries = rc;
+
+ rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries);
+ if (rc)
+ goto err1;
}
for (i = 0; i < msix_entries; i++) {
@@ -1176,9 +1233,10 @@ static int ntb_setup_interrupts(struct ntb_device *ndev)
*/
if (ndev->hw_type == BWD_HW)
writeq(~0, ndev->reg_ofs.ldb_mask);
- else
- writew(~(1 << ndev->limits.max_db_bits),
- ndev->reg_ofs.ldb_mask);
+ else {
+ u16 var = 1 << SNB_LINK_DB;
+ writew(~var, ndev->reg_ofs.ldb_mask);
+ }
rc = ntb_setup_msix(ndev);
if (!rc)
@@ -1286,6 +1344,39 @@ static void ntb_free_debugfs(struct ntb_device *ndev)
}
}
+static void ntb_hw_link_up(struct ntb_device *ndev)
+{
+ if (ndev->conn_type == NTB_CONN_TRANSPARENT)
+ ntb_link_event(ndev, NTB_LINK_UP);
+ else {
+ u32 ntb_cntl;
+
+ /* Let's bring the NTB link up */
+ ntb_cntl = readl(ndev->reg_ofs.lnk_cntl);
+ ntb_cntl &= ~(NTB_CNTL_LINK_DISABLE | NTB_CNTL_CFG_LOCK);
+ ntb_cntl |= NTB_CNTL_P2S_BAR23_SNOOP | NTB_CNTL_S2P_BAR23_SNOOP;
+ ntb_cntl |= NTB_CNTL_P2S_BAR45_SNOOP | NTB_CNTL_S2P_BAR45_SNOOP;
+ writel(ntb_cntl, ndev->reg_ofs.lnk_cntl);
+ }
+}
+
+static void ntb_hw_link_down(struct ntb_device *ndev)
+{
+ u32 ntb_cntl;
+
+ if (ndev->conn_type == NTB_CONN_TRANSPARENT) {
+ ntb_link_event(ndev, NTB_LINK_DOWN);
+ return;
+ }
+
+ /* Bring NTB link down */
+ ntb_cntl = readl(ndev->reg_ofs.lnk_cntl);
+ ntb_cntl &= ~(NTB_CNTL_P2S_BAR23_SNOOP | NTB_CNTL_S2P_BAR23_SNOOP);
+ ntb_cntl &= ~(NTB_CNTL_P2S_BAR45_SNOOP | NTB_CNTL_S2P_BAR45_SNOOP);
+ ntb_cntl |= NTB_CNTL_LINK_DISABLE | NTB_CNTL_CFG_LOCK;
+ writel(ntb_cntl, ndev->reg_ofs.lnk_cntl);
+}
+
static int ntb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct ntb_device *ndev;
@@ -1374,9 +1465,7 @@ static int ntb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (rc)
goto err6;
- /* Let's bring the NTB link up */
- writel(NTB_CNTL_BAR23_SNOOP | NTB_CNTL_BAR45_SNOOP,
- ndev->reg_ofs.lnk_cntl);
+ ntb_hw_link_up(ndev);
return 0;
@@ -1406,12 +1495,8 @@ static void ntb_pci_remove(struct pci_dev *pdev)
{
struct ntb_device *ndev = pci_get_drvdata(pdev);
int i;
- u32 ntb_cntl;
- /* Bring NTB link down */
- ntb_cntl = readl(ndev->reg_ofs.lnk_cntl);
- ntb_cntl |= NTB_CNTL_LINK_DISABLE;
- writel(ntb_cntl, ndev->reg_ofs.lnk_cntl);
+ ntb_hw_link_down(ndev);
ntb_transport_free(ndev->ntb_transport);
diff --git a/drivers/ntb/ntb_hw.h b/drivers/ntb/ntb_hw.h
index 0a31cedae7d4..bbdb7edca10c 100644
--- a/drivers/ntb/ntb_hw.h
+++ b/drivers/ntb/ntb_hw.h
@@ -106,10 +106,11 @@ struct ntb_mw {
};
struct ntb_db_cb {
- void (*callback) (void *data, int db_num);
+ int (*callback)(void *data, int db_num);
unsigned int db_num;
void *data;
struct ntb_device *ndev;
+ struct tasklet_struct irq_work;
};
struct ntb_device {
@@ -228,8 +229,8 @@ struct ntb_device *ntb_register_transport(struct pci_dev *pdev,
void ntb_unregister_transport(struct ntb_device *ndev);
void ntb_set_mw_addr(struct ntb_device *ndev, unsigned int mw, u64 addr);
int ntb_register_db_callback(struct ntb_device *ndev, unsigned int idx,
- void *data, void (*db_cb_func) (void *data,
- int db_num));
+ void *data, int (*db_cb_func)(void *data,
+ int db_num));
void ntb_unregister_db_callback(struct ntb_device *ndev, unsigned int idx);
int ntb_register_event_callback(struct ntb_device *ndev,
void (*event_cb_func) (void *handle,
diff --git a/drivers/ntb/ntb_regs.h b/drivers/ntb/ntb_regs.h
index aa4bdd393c58..9774506419d7 100644
--- a/drivers/ntb/ntb_regs.h
+++ b/drivers/ntb/ntb_regs.h
@@ -55,6 +55,7 @@
#define SNB_MAX_COMPAT_SPADS 16
/* Reserve the uppermost bit for link interrupt */
#define SNB_MAX_DB_BITS 15
+#define SNB_LINK_DB 15
#define SNB_DB_BITS_PER_VEC 5
#define SNB_MAX_MW 2
#define SNB_ERRATA_MAX_MW 1
@@ -75,9 +76,6 @@
#define SNB_SBAR2XLAT_OFFSET 0x0030
#define SNB_SBAR4XLAT_OFFSET 0x0038
#define SNB_SBAR0BASE_OFFSET 0x0040
-#define SNB_SBAR0BASE_OFFSET 0x0040
-#define SNB_SBAR2BASE_OFFSET 0x0048
-#define SNB_SBAR4BASE_OFFSET 0x0050
#define SNB_SBAR2BASE_OFFSET 0x0048
#define SNB_SBAR4BASE_OFFSET 0x0050
#define SNB_NTBCNTL_OFFSET 0x0058
@@ -145,11 +143,13 @@
#define BWD_LTSSMSTATEJMP_FORCEDETECT (1 << 2)
#define BWD_IBIST_ERR_OFLOW 0x7FFF7FFF
-#define NTB_CNTL_CFG_LOCK (1 << 0)
-#define NTB_CNTL_LINK_DISABLE (1 << 1)
-#define NTB_CNTL_BAR23_SNOOP (1 << 2)
-#define NTB_CNTL_BAR45_SNOOP (1 << 6)
-#define BWD_CNTL_LINK_DOWN (1 << 16)
+#define NTB_CNTL_CFG_LOCK (1 << 0)
+#define NTB_CNTL_LINK_DISABLE (1 << 1)
+#define NTB_CNTL_S2P_BAR23_SNOOP (1 << 2)
+#define NTB_CNTL_P2S_BAR23_SNOOP (1 << 4)
+#define NTB_CNTL_S2P_BAR45_SNOOP (1 << 6)
+#define NTB_CNTL_P2S_BAR45_SNOOP (1 << 8)
+#define BWD_CNTL_LINK_DOWN (1 << 16)
#define NTB_PPD_OFFSET 0x00D4
#define SNB_PPD_CONN_TYPE 0x0003
diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c
index d0222f13d154..3217f394d45b 100644
--- a/drivers/ntb/ntb_transport.c
+++ b/drivers/ntb/ntb_transport.c
@@ -119,7 +119,6 @@ struct ntb_transport_qp {
void (*rx_handler) (struct ntb_transport_qp *qp, void *qp_data,
void *data, int len);
- struct tasklet_struct rx_work;
struct list_head rx_pend_q;
struct list_head rx_free_q;
spinlock_t ntb_rx_pend_q_lock;
@@ -584,11 +583,8 @@ static int ntb_set_mw(struct ntb_transport *nt, int num_mw, unsigned int size)
return 0;
}
-static void ntb_qp_link_cleanup(struct work_struct *work)
+static void ntb_qp_link_cleanup(struct ntb_transport_qp *qp)
{
- struct ntb_transport_qp *qp = container_of(work,
- struct ntb_transport_qp,
- link_cleanup);
struct ntb_transport *nt = qp->transport;
struct pci_dev *pdev = ntb_query_pdev(nt->ndev);
@@ -602,6 +598,16 @@ static void ntb_qp_link_cleanup(struct work_struct *work)
dev_info(&pdev->dev, "qp %d: Link Down\n", qp->qp_num);
qp->qp_link = NTB_LINK_DOWN;
+}
+
+static void ntb_qp_link_cleanup_work(struct work_struct *work)
+{
+ struct ntb_transport_qp *qp = container_of(work,
+ struct ntb_transport_qp,
+ link_cleanup);
+ struct ntb_transport *nt = qp->transport;
+
+ ntb_qp_link_cleanup(qp);
if (nt->transport_link == NTB_LINK_UP)
schedule_delayed_work(&qp->link_work,
@@ -613,22 +619,20 @@ static void ntb_qp_link_down(struct ntb_transport_qp *qp)
schedule_work(&qp->link_cleanup);
}
-static void ntb_transport_link_cleanup(struct work_struct *work)
+static void ntb_transport_link_cleanup(struct ntb_transport *nt)
{
- struct ntb_transport *nt = container_of(work, struct ntb_transport,
- link_cleanup);
int i;
+ /* Pass along the info to any clients */
+ for (i = 0; i < nt->max_qps; i++)
+ if (!test_bit(i, &nt->qp_bitmap))
+ ntb_qp_link_cleanup(&nt->qps[i]);
+
if (nt->transport_link == NTB_LINK_DOWN)
cancel_delayed_work_sync(&nt->link_work);
else
nt->transport_link = NTB_LINK_DOWN;
- /* Pass along the info to any clients */
- for (i = 0; i < nt->max_qps; i++)
- if (!test_bit(i, &nt->qp_bitmap))
- ntb_qp_link_down(&nt->qps[i]);
-
/* The scratchpad registers keep the values if the remote side
* goes down, blast them now to give them a sane value the next
* time they are accessed
@@ -637,6 +641,14 @@ static void ntb_transport_link_cleanup(struct work_struct *work)
ntb_write_local_spad(nt->ndev, i, 0);
}
+static void ntb_transport_link_cleanup_work(struct work_struct *work)
+{
+ struct ntb_transport *nt = container_of(work, struct ntb_transport,
+ link_cleanup);
+
+ ntb_transport_link_cleanup(nt);
+}
+
static void ntb_transport_event_callback(void *data, enum ntb_hw_event event)
{
struct ntb_transport *nt = data;
@@ -880,7 +892,7 @@ static int ntb_transport_init_queue(struct ntb_transport *nt,
}
INIT_DELAYED_WORK(&qp->link_work, ntb_qp_link_work);
- INIT_WORK(&qp->link_cleanup, ntb_qp_link_cleanup);
+ INIT_WORK(&qp->link_cleanup, ntb_qp_link_cleanup_work);
spin_lock_init(&qp->ntb_rx_pend_q_lock);
spin_lock_init(&qp->ntb_rx_free_q_lock);
@@ -936,7 +948,7 @@ int ntb_transport_init(struct pci_dev *pdev)
}
INIT_DELAYED_WORK(&nt->link_work, ntb_transport_link_work);
- INIT_WORK(&nt->link_cleanup, ntb_transport_link_cleanup);
+ INIT_WORK(&nt->link_cleanup, ntb_transport_link_cleanup_work);
rc = ntb_register_event_callback(nt->ndev,
ntb_transport_event_callback);
@@ -972,7 +984,7 @@ void ntb_transport_free(void *transport)
struct ntb_device *ndev = nt->ndev;
int i;
- nt->transport_link = NTB_LINK_DOWN;
+ ntb_transport_link_cleanup(nt);
/* verify that all the qp's are freed */
for (i = 0; i < nt->max_qps; i++) {
@@ -1188,11 +1200,14 @@ err:
goto out;
}
-static void ntb_transport_rx(unsigned long data)
+static int ntb_transport_rxc_db(void *data, int db_num)
{
- struct ntb_transport_qp *qp = (struct ntb_transport_qp *)data;
+ struct ntb_transport_qp *qp = data;
int rc, i;
+ dev_dbg(&ntb_query_pdev(qp->ndev)->dev, "%s: doorbell %d received\n",
+ __func__, db_num);
+
/* Limit the number of packets processed in a single interrupt to
* provide fairness to others
*/
@@ -1204,16 +1219,8 @@ static void ntb_transport_rx(unsigned long data)
if (qp->dma_chan)
dma_async_issue_pending(qp->dma_chan);
-}
-
-static void ntb_transport_rxc_db(void *data, int db_num)
-{
- struct ntb_transport_qp *qp = data;
-
- dev_dbg(&ntb_query_pdev(qp->ndev)->dev, "%s: doorbell %d received\n",
- __func__, db_num);
- tasklet_schedule(&qp->rx_work);
+ return i;
}
static void ntb_tx_copy_callback(void *data)
@@ -1432,11 +1439,12 @@ ntb_transport_create_queue(void *data, struct pci_dev *pdev,
qp->tx_handler = handlers->tx_handler;
qp->event_handler = handlers->event_handler;
+ dmaengine_get();
qp->dma_chan = dma_find_channel(DMA_MEMCPY);
- if (!qp->dma_chan)
+ if (!qp->dma_chan) {
+ dmaengine_put();
dev_info(&pdev->dev, "Unable to allocate DMA channel, using CPU instead\n");
- else
- dmaengine_get();
+ }
for (i = 0; i < NTB_QP_DEF_NUM_ENTRIES; i++) {
entry = kzalloc(sizeof(struct ntb_queue_entry), GFP_ATOMIC);
@@ -1458,25 +1466,23 @@ ntb_transport_create_queue(void *data, struct pci_dev *pdev,
&qp->tx_free_q);
}
- tasklet_init(&qp->rx_work, ntb_transport_rx, (unsigned long) qp);
-
rc = ntb_register_db_callback(qp->ndev, free_queue, qp,
ntb_transport_rxc_db);
if (rc)
- goto err3;
+ goto err2;
dev_info(&pdev->dev, "NTB Transport QP %d created\n", qp->qp_num);
return qp;
-err3:
- tasklet_disable(&qp->rx_work);
err2:
while ((entry = ntb_list_rm(&qp->ntb_tx_free_q_lock, &qp->tx_free_q)))
kfree(entry);
err1:
while ((entry = ntb_list_rm(&qp->ntb_rx_free_q_lock, &qp->rx_free_q)))
kfree(entry);
+ if (qp->dma_chan)
+ dmaengine_put();
set_bit(free_queue, &nt->qp_bitmap);
err:
return NULL;
@@ -1515,7 +1521,6 @@ void ntb_transport_free_queue(struct ntb_transport_qp *qp)
}
ntb_unregister_db_callback(qp->ndev, qp->qp_num);
- tasklet_disable(&qp->rx_work);
cancel_delayed_work_sync(&qp->link_work);
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index b3b1b9aa8863..3a02717473ad 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -9,10 +9,6 @@
*
* Init/reset quirks for USB host controllers should be in the
* USB quirks file, where their drivers can access reuse it.
- *
- * The bridge optimization stuff has been removed. If you really
- * have a silly BIOS which is unable to set your host bridge right,
- * use the PowerTweak utility (see http://powertweak.sourceforge.net).
*/
#include <linux/types.h>
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index c45c60f7ea2f..fb233ae7bb0e 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -140,7 +140,6 @@ MODULE_PARM_DESC(kbd_backlight_timeout,
"on the model (default: no change from current value)");
#ifdef CONFIG_PM_SLEEP
-static void sony_nc_kbd_backlight_resume(void);
static void sony_nc_thermal_resume(void);
#endif
static int sony_nc_kbd_backlight_setup(struct platform_device *pd,
@@ -1487,13 +1486,6 @@ static void sony_nc_function_resume(void)
case 0x0135:
sony_nc_rfkill_update();
break;
- case 0x0137:
- case 0x0143:
- case 0x014b:
- case 0x014c:
- case 0x0163:
- sony_nc_kbd_backlight_resume();
- break;
default:
continue;
}
@@ -1899,25 +1891,6 @@ static void sony_nc_kbd_backlight_cleanup(struct platform_device *pd,
}
}
-#ifdef CONFIG_PM_SLEEP
-static void sony_nc_kbd_backlight_resume(void)
-{
- int ignore = 0;
-
- if (!kbdbl_ctl)
- return;
-
- if (kbdbl_ctl->mode == 0)
- sony_call_snc_handle(kbdbl_ctl->handle, kbdbl_ctl->base,
- &ignore);
-
- if (kbdbl_ctl->timeout != 0)
- sony_call_snc_handle(kbdbl_ctl->handle,
- (kbdbl_ctl->base + 0x200) |
- (kbdbl_ctl->timeout << 0x10), &ignore);
-}
-#endif
-
struct battery_care_control {
struct device_attribute attrs[2];
unsigned int handle;
diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c
index 724706a97dc4..fd3154d86901 100644
--- a/drivers/regulator/arizona-micsupp.c
+++ b/drivers/regulator/arizona-micsupp.c
@@ -174,6 +174,33 @@ static const struct regulator_desc arizona_micsupp = {
.owner = THIS_MODULE,
};
+static const struct regulator_linear_range arizona_micsupp_ext_ranges[] = {
+ REGULATOR_LINEAR_RANGE(900000, 0, 0x14, 25000),
+ REGULATOR_LINEAR_RANGE(1500000, 0x15, 0x27, 100000),
+};
+
+static const struct regulator_desc arizona_micsupp_ext = {
+ .name = "MICVDD",
+ .supply_name = "CPVDD",
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 40,
+ .ops = &arizona_micsupp_ops,
+
+ .vsel_reg = ARIZONA_LDO2_CONTROL_1,
+ .vsel_mask = ARIZONA_LDO2_VSEL_MASK,
+ .enable_reg = ARIZONA_MIC_CHARGE_PUMP_1,
+ .enable_mask = ARIZONA_CPMIC_ENA,
+ .bypass_reg = ARIZONA_MIC_CHARGE_PUMP_1,
+ .bypass_mask = ARIZONA_CPMIC_BYPASS,
+
+ .linear_ranges = arizona_micsupp_ext_ranges,
+ .n_linear_ranges = ARRAY_SIZE(arizona_micsupp_ext_ranges),
+
+ .enable_time = 3000,
+
+ .owner = THIS_MODULE,
+};
+
static const struct regulator_init_data arizona_micsupp_default = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS |
@@ -186,9 +213,22 @@ static const struct regulator_init_data arizona_micsupp_default = {
.num_consumer_supplies = 1,
};
+static const struct regulator_init_data arizona_micsupp_ext_default = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS |
+ REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_BYPASS,
+ .min_uV = 900000,
+ .max_uV = 3300000,
+ },
+
+ .num_consumer_supplies = 1,
+};
+
static int arizona_micsupp_probe(struct platform_device *pdev)
{
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
+ const struct regulator_desc *desc;
struct regulator_config config = { };
struct arizona_micsupp *micsupp;
int ret;
@@ -207,7 +247,17 @@ static int arizona_micsupp_probe(struct platform_device *pdev)
* default init_data for it. This will be overridden with
* platform data if provided.
*/
- micsupp->init_data = arizona_micsupp_default;
+ switch (arizona->type) {
+ case WM5110:
+ desc = &arizona_micsupp_ext;
+ micsupp->init_data = arizona_micsupp_ext_default;
+ break;
+ default:
+ desc = &arizona_micsupp;
+ micsupp->init_data = arizona_micsupp_default;
+ break;
+ }
+
micsupp->init_data.consumer_supplies = &micsupp->supply;
micsupp->supply.supply = "MICVDD";
micsupp->supply.dev_name = dev_name(arizona->dev);
@@ -226,7 +276,7 @@ static int arizona_micsupp_probe(struct platform_device *pdev)
ARIZONA_CPMIC_BYPASS, 0);
micsupp->regulator = devm_regulator_register(&pdev->dev,
- &arizona_micsupp,
+ desc,
&config);
if (IS_ERR(micsupp->regulator)) {
ret = PTR_ERR(micsupp->regulator);
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 6382f0af353b..3fe13130baec 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2184,6 +2184,9 @@ int regulator_list_voltage(struct regulator *regulator, unsigned selector)
struct regulator_ops *ops = rdev->desc->ops;
int ret;
+ if (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1 && !selector)
+ return rdev->desc->fixed_uV;
+
if (!ops->list_voltage || selector >= rdev->desc->n_voltages)
return -EINVAL;
diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c
index 04406a918c04..234960dc9607 100644
--- a/drivers/regulator/gpio-regulator.c
+++ b/drivers/regulator/gpio-regulator.c
@@ -139,6 +139,7 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np)
struct property *prop;
const char *regtype;
int proplen, gpio, i;
+ int ret;
config = devm_kzalloc(dev,
sizeof(struct gpio_regulator_config),
@@ -202,7 +203,11 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np)
}
config->nr_states = i;
- of_property_read_string(np, "regulator-type", &regtype);
+ ret = of_property_read_string(np, "regulator-type", &regtype);
+ if (ret < 0) {
+ dev_err(dev, "Missing 'regulator-type' property\n");
+ return ERR_PTR(-EINVAL);
+ }
if (!strncmp("voltage", regtype, 7))
config->type = REGULATOR_VOLTAGE;
diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index ba67b2c4e2e7..032df3799efb 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -308,9 +308,15 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip)
if (ret)
return ret;
- if (value & 0x0f) {
- dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
- return -ENODEV;
+ switch (value & 0x0f) {
+ /* Freescale misprogrammed 1-3% of parts prior to week 8 of 2013 as ID=8 */
+ case 0x8:
+ dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8");
+ case 0x0:
+ break;
+ default:
+ dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
+ return -ENODEV;
}
ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value);
diff --git a/drivers/staging/btmtk_usb/btmtk_usb.c b/drivers/staging/btmtk_usb/btmtk_usb.c
index 7a9bf3b57810..9a5ebd6cc512 100644
--- a/drivers/staging/btmtk_usb/btmtk_usb.c
+++ b/drivers/staging/btmtk_usb/btmtk_usb.c
@@ -1284,9 +1284,8 @@ done:
kfree_skb(skb);
}
-static int btmtk_usb_send_frame(struct sk_buff *skb)
+static int btmtk_usb_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
{
- struct hci_dev *hdev = (struct hci_dev *)skb->dev;
struct btmtk_usb_data *data = hci_get_drvdata(hdev);
struct usb_ctrlrequest *dr;
struct urb *urb;
diff --git a/drivers/staging/comedi/drivers/pcl730.c b/drivers/staging/comedi/drivers/pcl730.c
index d041b714db29..2baaf1db6fbf 100644
--- a/drivers/staging/comedi/drivers/pcl730.c
+++ b/drivers/staging/comedi/drivers/pcl730.c
@@ -173,11 +173,11 @@ static int pcl730_do_insn_bits(struct comedi_device *dev,
if (mask) {
if (mask & 0x00ff)
outb(s->state & 0xff, dev->iobase + reg);
- if ((mask & 0xff00) & (s->n_chan > 8))
+ if ((mask & 0xff00) && (s->n_chan > 8))
outb((s->state >> 8) & 0xff, dev->iobase + reg + 1);
- if ((mask & 0xff0000) & (s->n_chan > 16))
+ if ((mask & 0xff0000) && (s->n_chan > 16))
outb((s->state >> 16) & 0xff, dev->iobase + reg + 2);
- if ((mask & 0xff000000) & (s->n_chan > 24))
+ if ((mask & 0xff000000) && (s->n_chan > 24))
outb((s->state >> 24) & 0xff, dev->iobase + reg + 3);
}
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index 6815cfe2664e..b486099b543d 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -494,7 +494,7 @@ static void s626_send_dac(struct comedi_device *dev, uint32_t val)
* Private helper function: Write setpoint to an application DAC channel.
*/
static void s626_set_dac(struct comedi_device *dev, uint16_t chan,
- unsigned short dacdata)
+ int16_t dacdata)
{
struct s626_private *devpriv = dev->private;
uint16_t signmask;
diff --git a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c
index 933b01a0f03d..0adf3cffddb0 100644
--- a/drivers/staging/comedi/drivers/vmk80xx.c
+++ b/drivers/staging/comedi/drivers/vmk80xx.c
@@ -465,7 +465,7 @@ static int vmk80xx_do_insn_bits(struct comedi_device *dev,
unsigned char *rx_buf = devpriv->usb_rx_buf;
unsigned char *tx_buf = devpriv->usb_tx_buf;
int reg, cmd;
- int ret;
+ int ret = 0;
if (devpriv->model == VMK8061_MODEL) {
reg = VMK8061_DO_REG;
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_download.c b/drivers/staging/ft1000/ft1000-usb/ft1000_download.c
index 68ded17c0f5c..12f333fa59b5 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_download.c
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_download.c
@@ -578,7 +578,7 @@ static int request_code_segment(struct ft1000_usb *ft1000dev, u16 **s_file,
u8 **c_file, const u8 *endpoint, bool boot_case)
{
long word_length;
- int status;
+ int status = 0;
/*DEBUG("FT1000:REQUEST_CODE_SEGMENT\n");i*/
word_length = get_request_value(ft1000dev);
@@ -1074,4 +1074,3 @@ int scram_dnldr(struct ft1000_usb *ft1000dev, void *pFileStart,
return status;
}
-
diff --git a/drivers/staging/iio/magnetometer/Kconfig b/drivers/staging/iio/magnetometer/Kconfig
index a3ea69e9d800..34634da1f9f7 100644
--- a/drivers/staging/iio/magnetometer/Kconfig
+++ b/drivers/staging/iio/magnetometer/Kconfig
@@ -6,6 +6,8 @@ menu "Magnetometer sensors"
config SENSORS_HMC5843
tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer"
depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
help
Say Y here to add support for the Honeywell HMC5843, HMC5883 and
HMC5883L 3-Axis Magnetometer (digital compass).
diff --git a/drivers/staging/imx-drm/Makefile b/drivers/staging/imx-drm/Makefile
index 2c3a9e178fb5..8742432d7b01 100644
--- a/drivers/staging/imx-drm/Makefile
+++ b/drivers/staging/imx-drm/Makefile
@@ -8,4 +8,6 @@ obj-$(CONFIG_DRM_IMX_TVE) += imx-tve.o
obj-$(CONFIG_DRM_IMX_LDB) += imx-ldb.o
obj-$(CONFIG_DRM_IMX_FB_HELPER) += imx-fbdev.o
obj-$(CONFIG_DRM_IMX_IPUV3_CORE) += ipu-v3/
-obj-$(CONFIG_DRM_IMX_IPUV3) += ipuv3-crtc.o ipuv3-plane.o
+
+imx-ipuv3-crtc-objs := ipuv3-crtc.o ipuv3-plane.o
+obj-$(CONFIG_DRM_IMX_IPUV3) += imx-ipuv3-crtc.o
diff --git a/drivers/staging/imx-drm/imx-drm-core.c b/drivers/staging/imx-drm/imx-drm-core.c
index 51aa9772f959..6bd015ac9d68 100644
--- a/drivers/staging/imx-drm/imx-drm-core.c
+++ b/drivers/staging/imx-drm/imx-drm-core.c
@@ -72,6 +72,7 @@ int imx_drm_crtc_id(struct imx_drm_crtc *crtc)
{
return crtc->pipe;
}
+EXPORT_SYMBOL_GPL(imx_drm_crtc_id);
static void imx_drm_driver_lastclose(struct drm_device *drm)
{
diff --git a/drivers/staging/lustre/lustre/ptlrpc/pinger.c b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
index 5dec771d70ee..4d340f4a2198 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/pinger.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
@@ -409,8 +409,8 @@ int ptlrpc_stop_pinger(void)
struct l_wait_info lwi = { 0 };
int rc = 0;
- if (!thread_is_init(&pinger_thread) &&
- !thread_is_stopped(&pinger_thread))
+ if (thread_is_init(&pinger_thread) ||
+ thread_is_stopped(&pinger_thread))
return -EALREADY;
ptlrpc_pinger_remove_timeouts();
diff --git a/drivers/staging/media/go7007/go7007-usb.c b/drivers/staging/media/go7007/go7007-usb.c
index 58684da45e6c..b658c2316df3 100644
--- a/drivers/staging/media/go7007/go7007-usb.c
+++ b/drivers/staging/media/go7007/go7007-usb.c
@@ -15,6 +15,8 @@
* Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -661,7 +663,7 @@ static int go7007_usb_interface_reset(struct go7007 *go)
if (usb->board->flags & GO7007_USB_EZUSB) {
/* Reset buffer in EZ-USB */
- dev_dbg(go->dev, "resetting EZ-USB buffers\n");
+ pr_debug("resetting EZ-USB buffers\n");
if (go7007_usb_vendor_request(go, 0x10, 0, 0, NULL, 0, 0) < 0 ||
go7007_usb_vendor_request(go, 0x10, 0, 0, NULL, 0, 0) < 0)
return -1;
@@ -689,7 +691,7 @@ static int go7007_usb_ezusb_write_interrupt(struct go7007 *go,
u16 status_reg = 0;
int timeout = 500;
- dev_dbg(go->dev, "WriteInterrupt: %04x %04x\n", addr, data);
+ pr_debug("WriteInterrupt: %04x %04x\n", addr, data);
for (i = 0; i < 100; ++i) {
r = usb_control_msg(usb->usbdev,
@@ -734,7 +736,7 @@ static int go7007_usb_onboard_write_interrupt(struct go7007 *go,
int r;
int timeout = 500;
- dev_dbg(go->dev, "WriteInterrupt: %04x %04x\n", addr, data);
+ pr_debug("WriteInterrupt: %04x %04x\n", addr, data);
go->usb_buf[0] = data & 0xff;
go->usb_buf[1] = data >> 8;
@@ -771,7 +773,7 @@ static void go7007_usb_readinterrupt_complete(struct urb *urb)
go->interrupt_available = 1;
go->interrupt_data = __le16_to_cpu(regs[0]);
go->interrupt_value = __le16_to_cpu(regs[1]);
- dev_dbg(go->dev, "ReadInterrupt: %04x %04x\n",
+ pr_debug("ReadInterrupt: %04x %04x\n",
go->interrupt_value, go->interrupt_data);
}
@@ -891,7 +893,7 @@ static int go7007_usb_send_firmware(struct go7007 *go, u8 *data, int len)
int transferred, pipe;
int timeout = 500;
- dev_dbg(go->dev, "DownloadBuffer sending %d bytes\n", len);
+ pr_debug("DownloadBuffer sending %d bytes\n", len);
if (usb->board->flags & GO7007_USB_EZUSB)
pipe = usb_sndbulkpipe(usb->usbdev, 2);
@@ -977,7 +979,7 @@ static int go7007_usb_i2c_master_xfer(struct i2c_adapter *adapter,
!(msgs[i].flags & I2C_M_RD) &&
(msgs[i + 1].flags & I2C_M_RD)) {
#ifdef GO7007_I2C_DEBUG
- dev_dbg(go->dev, "i2c write/read %d/%d bytes on %02x\n",
+ pr_debug("i2c write/read %d/%d bytes on %02x\n",
msgs[i].len, msgs[i + 1].len, msgs[i].addr);
#endif
buf[0] = 0x01;
@@ -988,7 +990,7 @@ static int go7007_usb_i2c_master_xfer(struct i2c_adapter *adapter,
buf[buf_len++] = msgs[++i].len;
} else if (msgs[i].flags & I2C_M_RD) {
#ifdef GO7007_I2C_DEBUG
- dev_dbg(go->dev, "i2c read %d bytes on %02x\n",
+ pr_debug("i2c read %d bytes on %02x\n",
msgs[i].len, msgs[i].addr);
#endif
buf[0] = 0x01;
@@ -998,7 +1000,7 @@ static int go7007_usb_i2c_master_xfer(struct i2c_adapter *adapter,
buf_len = 4;
} else {
#ifdef GO7007_I2C_DEBUG
- dev_dbg(go->dev, "i2c write %d bytes on %02x\n",
+ pr_debug("i2c write %d bytes on %02x\n",
msgs[i].len, msgs[i].addr);
#endif
buf[0] = 0x00;
@@ -1057,7 +1059,7 @@ static int go7007_usb_probe(struct usb_interface *intf,
char *name;
int video_pipe, i, v_urb_len;
- dev_dbg(go->dev, "probing new GO7007 USB board\n");
+ pr_debug("probing new GO7007 USB board\n");
switch (id->driver_info) {
case GO7007_BOARDID_MATRIX_II:
@@ -1097,13 +1099,13 @@ static int go7007_usb_probe(struct usb_interface *intf,
board = &board_px_tv402u;
break;
case GO7007_BOARDID_LIFEVIEW_LR192:
- dev_err(go->dev, "The Lifeview TV Walker Ultra is not supported. Sorry!\n");
+ dev_err(&intf->dev, "The Lifeview TV Walker Ultra is not supported. Sorry!\n");
return -ENODEV;
name = "Lifeview TV Walker Ultra";
board = &board_lifeview_lr192;
break;
case GO7007_BOARDID_SENSORAY_2250:
- dev_info(go->dev, "Sensoray 2250 found\n");
+ dev_info(&intf->dev, "Sensoray 2250 found\n");
name = "Sensoray 2250/2251";
board = &board_sensoray_2250;
break;
@@ -1112,7 +1114,7 @@ static int go7007_usb_probe(struct usb_interface *intf,
board = &board_ads_usbav_709;
break;
default:
- dev_err(go->dev, "unknown board ID %d!\n",
+ dev_err(&intf->dev, "unknown board ID %d!\n",
(unsigned int)id->driver_info);
return -ENODEV;
}
@@ -1247,7 +1249,7 @@ static int go7007_usb_probe(struct usb_interface *intf,
sizeof(go->name));
break;
default:
- dev_dbg(go->dev, "unable to detect tuner type!\n");
+ pr_debug("unable to detect tuner type!\n");
break;
}
/* Configure tuner mode selection inputs connected
diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c
index 3066ee2e753b..49ea76b3435d 100644
--- a/drivers/staging/nvec/nvec.c
+++ b/drivers/staging/nvec/nvec.c
@@ -681,7 +681,8 @@ static irqreturn_t nvec_interrupt(int irq, void *dev)
dev_err(nvec->dev,
"RX buffer overflow on %p: "
"Trying to write byte %u of %u\n",
- nvec->rx, nvec->rx->pos, NVEC_MSG_SIZE);
+ nvec->rx, nvec->rx ? nvec->rx->pos : 0,
+ NVEC_MSG_SIZE);
break;
default:
nvec->state = 0;
diff --git a/drivers/staging/rtl8188eu/core/rtw_ap.c b/drivers/staging/rtl8188eu/core/rtw_ap.c
index 2c678f409573..2f548ebada59 100644
--- a/drivers/staging/rtl8188eu/core/rtw_ap.c
+++ b/drivers/staging/rtl8188eu/core/rtw_ap.c
@@ -1115,6 +1115,9 @@ int rtw_check_beacon_data(struct adapter *padapter, u8 *pbuf, int len)
return _FAIL;
}
+ /* fix bug of flush_cam_entry at STOP AP mode */
+ psta->state |= WIFI_AP_STATE;
+ rtw_indicate_connect(padapter);
pmlmepriv->cur_network.join_res = true;/* for check if already set beacon */
return ret;
}
diff --git a/drivers/staging/tidspbridge/Kconfig b/drivers/staging/tidspbridge/Kconfig
index 165b918b8171..1b6d581c438b 100644
--- a/drivers/staging/tidspbridge/Kconfig
+++ b/drivers/staging/tidspbridge/Kconfig
@@ -4,7 +4,7 @@
menuconfig TIDSPBRIDGE
tristate "DSP Bridge driver"
- depends on ARCH_OMAP3 && !ARCH_MULTIPLATFORM
+ depends on ARCH_OMAP3 && !ARCH_MULTIPLATFORM && BROKEN
select MAILBOX
select OMAP2PLUS_MBOX
help
diff --git a/drivers/staging/vt6655/hostap.c b/drivers/staging/vt6655/hostap.c
index aab0012bba92..ab8b2ba6eedd 100644
--- a/drivers/staging/vt6655/hostap.c
+++ b/drivers/staging/vt6655/hostap.c
@@ -143,7 +143,8 @@ static int hostap_disable_hostapd(PSDevice pDevice, int rtnl_locked)
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Netdevice %s unregistered\n",
pDevice->dev->name, pDevice->apdev->name);
}
- free_netdev(pDevice->apdev);
+ if (pDevice->apdev)
+ free_netdev(pDevice->apdev);
pDevice->apdev = NULL;
pDevice->bEnable8021x = false;
pDevice->bEnableHostWEP = false;
diff --git a/drivers/staging/vt6656/baseband.c b/drivers/staging/vt6656/baseband.c
index 1e8b8412e67e..4aa5ef54b683 100644
--- a/drivers/staging/vt6656/baseband.c
+++ b/drivers/staging/vt6656/baseband.c
@@ -939,6 +939,7 @@ int BBbVT3184Init(struct vnt_private *pDevice)
u8 * pbyAgc;
u16 wLengthAgc;
u8 abyArray[256];
+ u8 data;
ntStatus = CONTROLnsRequestIn(pDevice,
MESSAGE_TYPE_READ,
@@ -1104,6 +1105,16 @@ else {
ControlvWriteByte(pDevice,MESSAGE_REQUEST_BBREG,0x0D,0x01);
RFbRFTableDownload(pDevice);
+
+ /* Fix for TX USB resets from vendors driver */
+ CONTROLnsRequestIn(pDevice, MESSAGE_TYPE_READ, USB_REG4,
+ MESSAGE_REQUEST_MEM, sizeof(data), &data);
+
+ data |= 0x2;
+
+ CONTROLnsRequestOut(pDevice, MESSAGE_TYPE_WRITE, USB_REG4,
+ MESSAGE_REQUEST_MEM, sizeof(data), &data);
+
return true;//ntStatus;
}
diff --git a/drivers/staging/vt6656/hostap.c b/drivers/staging/vt6656/hostap.c
index ae1676d190c5..67ba48b9a8d9 100644
--- a/drivers/staging/vt6656/hostap.c
+++ b/drivers/staging/vt6656/hostap.c
@@ -133,7 +133,8 @@ static int hostap_disable_hostapd(struct vnt_private *pDevice, int rtnl_locked)
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Netdevice %s unregistered\n",
pDevice->dev->name, pDevice->apdev->name);
}
- free_netdev(pDevice->apdev);
+ if (pDevice->apdev)
+ free_netdev(pDevice->apdev);
pDevice->apdev = NULL;
pDevice->bEnable8021x = false;
pDevice->bEnableHostWEP = false;
diff --git a/drivers/staging/vt6656/rndis.h b/drivers/staging/vt6656/rndis.h
index 5e073062017a..5cf5e732a36f 100644
--- a/drivers/staging/vt6656/rndis.h
+++ b/drivers/staging/vt6656/rndis.h
@@ -66,6 +66,8 @@
#define VIAUSB20_PACKET_HEADER 0x04
+#define USB_REG4 0x604
+
typedef struct _CMD_MESSAGE
{
u8 byData[256];
diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c
index 79ce363b2ea9..3277d9838f4e 100644
--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -652,21 +652,30 @@ static ssize_t reset_store(struct device *dev,
return -ENOMEM;
/* Do not reset an active device! */
- if (bdev->bd_holders)
- return -EBUSY;
+ if (bdev->bd_holders) {
+ ret = -EBUSY;
+ goto out;
+ }
ret = kstrtou16(buf, 10, &do_reset);
if (ret)
- return ret;
+ goto out;
- if (!do_reset)
- return -EINVAL;
+ if (!do_reset) {
+ ret = -EINVAL;
+ goto out;
+ }
/* Make sure all pending I/O is finished */
fsync_bdev(bdev);
+ bdput(bdev);
zram_reset_device(zram, true);
return len;
+
+out:
+ bdput(bdev);
+ return ret;
}
static void __zram_make_request(struct zram *zram, struct bio *bio, int rw)
diff --git a/drivers/staging/zsmalloc/zsmalloc-main.c b/drivers/staging/zsmalloc/zsmalloc-main.c
index 1a67537dbc56..3b950e5a918f 100644
--- a/drivers/staging/zsmalloc/zsmalloc-main.c
+++ b/drivers/staging/zsmalloc/zsmalloc-main.c
@@ -430,7 +430,12 @@ static struct page *get_next_page(struct page *page)
return next;
}
-/* Encode <page, obj_idx> as a single handle value */
+/*
+ * Encode <page, obj_idx> as a single handle value.
+ * On hardware platforms with physical memory starting at 0x0 the pfn
+ * could be 0 so we ensure that the handle will never be 0 by adjusting the
+ * encoded obj_idx value before encoding.
+ */
static void *obj_location_to_handle(struct page *page, unsigned long obj_idx)
{
unsigned long handle;
@@ -441,17 +446,21 @@ static void *obj_location_to_handle(struct page *page, unsigned long obj_idx)
}
handle = page_to_pfn(page) << OBJ_INDEX_BITS;
- handle |= (obj_idx & OBJ_INDEX_MASK);
+ handle |= ((obj_idx + 1) & OBJ_INDEX_MASK);
return (void *)handle;
}
-/* Decode <page, obj_idx> pair from the given object handle */
+/*
+ * Decode <page, obj_idx> pair from the given object handle. We adjust the
+ * decoded obj_idx back to its original value since it was adjusted in
+ * obj_location_to_handle().
+ */
static void obj_handle_to_location(unsigned long handle, struct page **page,
unsigned long *obj_idx)
{
*page = pfn_to_page(handle >> OBJ_INDEX_BITS);
- *obj_idx = handle & OBJ_INDEX_MASK;
+ *obj_idx = (handle & OBJ_INDEX_MASK) - 1;
}
static unsigned long obj_idx_to_offset(struct page *page,
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 2b86f8e0fb58..71630a2af42c 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1855,6 +1855,9 @@ static struct console sercons = {
*/
static int __init amiserial_console_init(void)
{
+ if (!MACH_IS_AMIGA)
+ return -ENODEV;
+
register_console(&sercons);
return 0;
}
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 7cdd1eb9406c..0f74945af624 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -768,7 +768,7 @@ static size_t __process_echoes(struct tty_struct *tty)
* data at the tail to prevent a subsequent overrun */
while (ldata->echo_commit - tail >= ECHO_DISCARD_WATERMARK) {
if (echo_buf(ldata, tail) == ECHO_OP_START) {
- if (echo_buf(ldata, tail) == ECHO_OP_ERASE_TAB)
+ if (echo_buf(ldata, tail + 1) == ECHO_OP_ERASE_TAB)
tail += 3;
else
tail += 2;
@@ -1998,7 +1998,10 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
found = 1;
size = N_TTY_BUF_SIZE - tail;
- n = (found + eol + size) & (N_TTY_BUF_SIZE - 1);
+ n = eol - tail;
+ if (n > 4096)
+ n += 4096;
+ n += found;
c = n;
if (found && read_buf(ldata, eol) == __DISABLED_CHAR) {
@@ -2243,18 +2246,19 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
if (time)
timeout = time;
}
- mutex_unlock(&ldata->atomic_read_lock);
- remove_wait_queue(&tty->read_wait, &wait);
+ n_tty_set_room(tty);
+ up_read(&tty->termios_rwsem);
+ remove_wait_queue(&tty->read_wait, &wait);
if (!waitqueue_active(&tty->read_wait))
ldata->minimum_to_wake = minimum;
+ mutex_unlock(&ldata->atomic_read_lock);
+
__set_current_state(TASK_RUNNING);
if (b - buf)
retval = b - buf;
- n_tty_set_room(tty);
- up_read(&tty->termios_rwsem);
return retval;
}
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index f3b306efaa59..23329918f229 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -41,7 +41,7 @@ config SERIAL_8250_DEPRECATED_OPTIONS
accept kernel parameters in both forms like 8250_core.nr_uarts=4 and
8250.nr_uarts=4. We now renamed the module back to 8250, but if
anybody noticed in 3.7 and changed their userspace we still have to
- keep the 8350_core.* options around until they revert the changes
+ keep the 8250_core.* options around until they revert the changes
they already did.
If 8250 is built as a module, this adds 8250_core alias instead.
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 481b781b26e3..e9d420ff3931 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -2052,6 +2052,9 @@ static int __init pmz_console_init(void)
/* Probe ports */
pmz_probe();
+ if (pmz_ports_count == 0)
+ return -ENODEV;
+
/* TODO: Autoprobe console based on OF */
/* pmz_console.index = i; */
register_console(&pmz_console);
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 3a1a01af9a80..c74a00ad7add 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2086,6 +2086,7 @@ retry_open:
filp->f_op = &tty_fops;
goto retry_open;
}
+ clear_bit(TTY_HUPPED, &tty->flags);
tty_unlock(tty);
diff --git a/fs/affs/Changes b/fs/affs/Changes
index a29409c1ffe0..b41c2c9792ff 100644
--- a/fs/affs/Changes
+++ b/fs/affs/Changes
@@ -91,7 +91,7 @@ more 2.4 fixes: [Roman Zippel]
Version 3.11
------------
-- Converted to use 2.3.x page cache [Dave Jones <dave@powertweak.com>]
+- Converted to use 2.3.x page cache [Dave Jones]
- Corruption in truncate() bugfix [Ken Tyler <kent@werple.net.au>]
Version 3.10
diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c
index 6df8bd481425..1e561c059539 100644
--- a/fs/ceph/addr.c
+++ b/fs/ceph/addr.c
@@ -216,7 +216,7 @@ static int readpage_nounlock(struct file *filp, struct page *page)
}
SetPageUptodate(page);
- if (err == 0)
+ if (err >= 0)
ceph_readpage_to_fscache(inode, page);
out:
diff --git a/fs/ceph/cache.c b/fs/ceph/cache.c
index 7db2e6ca4b8f..8c44fdd4e1c3 100644
--- a/fs/ceph/cache.c
+++ b/fs/ceph/cache.c
@@ -324,6 +324,9 @@ void ceph_invalidate_fscache_page(struct inode* inode, struct page *page)
{
struct ceph_inode_info *ci = ceph_inode(inode);
+ if (!PageFsCache(page))
+ return;
+
fscache_wait_on_page_write(ci->fscache, page);
fscache_uncache_page(ci->fscache, page);
}
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index 13976c33332e..3c0a4bd74996 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -897,7 +897,7 @@ static int __ceph_is_any_caps(struct ceph_inode_info *ci)
* caller should hold i_ceph_lock.
* caller will not hold session s_mutex if called from destroy_inode.
*/
-void __ceph_remove_cap(struct ceph_cap *cap)
+void __ceph_remove_cap(struct ceph_cap *cap, bool queue_release)
{
struct ceph_mds_session *session = cap->session;
struct ceph_inode_info *ci = cap->ci;
@@ -909,6 +909,16 @@ void __ceph_remove_cap(struct ceph_cap *cap)
/* remove from session list */
spin_lock(&session->s_cap_lock);
+ /*
+ * s_cap_reconnect is protected by s_cap_lock. no one changes
+ * s_cap_gen while session is in the reconnect state.
+ */
+ if (queue_release &&
+ (!session->s_cap_reconnect ||
+ cap->cap_gen == session->s_cap_gen))
+ __queue_cap_release(session, ci->i_vino.ino, cap->cap_id,
+ cap->mseq, cap->issue_seq);
+
if (session->s_cap_iterator == cap) {
/* not yet, we are iterating over this very cap */
dout("__ceph_remove_cap delaying %p removal from session %p\n",
@@ -1023,7 +1033,6 @@ void __queue_cap_release(struct ceph_mds_session *session,
struct ceph_mds_cap_release *head;
struct ceph_mds_cap_item *item;
- spin_lock(&session->s_cap_lock);
BUG_ON(!session->s_num_cap_releases);
msg = list_first_entry(&session->s_cap_releases,
struct ceph_msg, list_head);
@@ -1052,7 +1061,6 @@ void __queue_cap_release(struct ceph_mds_session *session,
(int)CEPH_CAPS_PER_RELEASE,
(int)msg->front.iov_len);
}
- spin_unlock(&session->s_cap_lock);
}
/*
@@ -1067,12 +1075,8 @@ void ceph_queue_caps_release(struct inode *inode)
p = rb_first(&ci->i_caps);
while (p) {
struct ceph_cap *cap = rb_entry(p, struct ceph_cap, ci_node);
- struct ceph_mds_session *session = cap->session;
-
- __queue_cap_release(session, ceph_ino(inode), cap->cap_id,
- cap->mseq, cap->issue_seq);
p = rb_next(p);
- __ceph_remove_cap(cap);
+ __ceph_remove_cap(cap, true);
}
}
@@ -2791,7 +2795,7 @@ static void handle_cap_export(struct inode *inode, struct ceph_mds_caps *ex,
}
spin_unlock(&mdsc->cap_dirty_lock);
}
- __ceph_remove_cap(cap);
+ __ceph_remove_cap(cap, false);
}
/* else, we already released it */
@@ -2931,9 +2935,12 @@ void ceph_handle_caps(struct ceph_mds_session *session,
if (!inode) {
dout(" i don't have ino %llx\n", vino.ino);
- if (op == CEPH_CAP_OP_IMPORT)
+ if (op == CEPH_CAP_OP_IMPORT) {
+ spin_lock(&session->s_cap_lock);
__queue_cap_release(session, vino.ino, cap_id,
mseq, seq);
+ spin_unlock(&session->s_cap_lock);
+ }
goto flush_cap_releases;
}
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index 868b61d56cac..2a0bcaeb189a 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -352,8 +352,18 @@ more:
}
/* note next offset and last dentry name */
+ rinfo = &req->r_reply_info;
+ if (le32_to_cpu(rinfo->dir_dir->frag) != frag) {
+ frag = le32_to_cpu(rinfo->dir_dir->frag);
+ if (ceph_frag_is_leftmost(frag))
+ fi->next_offset = 2;
+ else
+ fi->next_offset = 0;
+ off = fi->next_offset;
+ }
fi->offset = fi->next_offset;
fi->last_readdir = req;
+ fi->frag = frag;
if (req->r_reply_info.dir_end) {
kfree(fi->last_name);
@@ -363,7 +373,6 @@ more:
else
fi->next_offset = 0;
} else {
- rinfo = &req->r_reply_info;
err = note_last_dentry(fi,
rinfo->dir_dname[rinfo->dir_nr-1],
rinfo->dir_dname_len[rinfo->dir_nr-1]);
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 8549a48115f7..9a8e396aed89 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -577,6 +577,8 @@ static int fill_inode(struct inode *inode,
int issued = 0, implemented;
struct timespec mtime, atime, ctime;
u32 nsplits;
+ struct ceph_inode_frag *frag;
+ struct rb_node *rb_node;
struct ceph_buffer *xattr_blob = NULL;
int err = 0;
int queue_trunc = 0;
@@ -751,15 +753,38 @@ no_change:
/* FIXME: move me up, if/when version reflects fragtree changes */
nsplits = le32_to_cpu(info->fragtree.nsplits);
mutex_lock(&ci->i_fragtree_mutex);
+ rb_node = rb_first(&ci->i_fragtree);
for (i = 0; i < nsplits; i++) {
u32 id = le32_to_cpu(info->fragtree.splits[i].frag);
- struct ceph_inode_frag *frag = __get_or_create_frag(ci, id);
-
- if (IS_ERR(frag))
- continue;
+ frag = NULL;
+ while (rb_node) {
+ frag = rb_entry(rb_node, struct ceph_inode_frag, node);
+ if (ceph_frag_compare(frag->frag, id) >= 0) {
+ if (frag->frag != id)
+ frag = NULL;
+ else
+ rb_node = rb_next(rb_node);
+ break;
+ }
+ rb_node = rb_next(rb_node);
+ rb_erase(&frag->node, &ci->i_fragtree);
+ kfree(frag);
+ frag = NULL;
+ }
+ if (!frag) {
+ frag = __get_or_create_frag(ci, id);
+ if (IS_ERR(frag))
+ continue;
+ }
frag->split_by = le32_to_cpu(info->fragtree.splits[i].by);
dout(" frag %x split by %d\n", frag->frag, frag->split_by);
}
+ while (rb_node) {
+ frag = rb_entry(rb_node, struct ceph_inode_frag, node);
+ rb_node = rb_next(rb_node);
+ rb_erase(&frag->node, &ci->i_fragtree);
+ kfree(frag);
+ }
mutex_unlock(&ci->i_fragtree_mutex);
/* were we issued a capability? */
@@ -1250,8 +1275,20 @@ int ceph_readdir_prepopulate(struct ceph_mds_request *req,
int err = 0, i;
struct inode *snapdir = NULL;
struct ceph_mds_request_head *rhead = req->r_request->front.iov_base;
- u64 frag = le32_to_cpu(rhead->args.readdir.frag);
struct ceph_dentry_info *di;
+ u64 r_readdir_offset = req->r_readdir_offset;
+ u32 frag = le32_to_cpu(rhead->args.readdir.frag);
+
+ if (rinfo->dir_dir &&
+ le32_to_cpu(rinfo->dir_dir->frag) != frag) {
+ dout("readdir_prepopulate got new frag %x -> %x\n",
+ frag, le32_to_cpu(rinfo->dir_dir->frag));
+ frag = le32_to_cpu(rinfo->dir_dir->frag);
+ if (ceph_frag_is_leftmost(frag))
+ r_readdir_offset = 2;
+ else
+ r_readdir_offset = 0;
+ }
if (req->r_aborted)
return readdir_prepopulate_inodes_only(req, session);
@@ -1315,7 +1352,7 @@ retry_lookup:
}
di = dn->d_fsdata;
- di->offset = ceph_make_fpos(frag, i + req->r_readdir_offset);
+ di->offset = ceph_make_fpos(frag, i + r_readdir_offset);
/* inode */
if (dn->d_inode) {
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index b7bda5d9611d..d90861f45210 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -43,6 +43,7 @@
*/
struct ceph_reconnect_state {
+ int nr_caps;
struct ceph_pagelist *pagelist;
bool flock;
};
@@ -443,6 +444,7 @@ static struct ceph_mds_session *register_session(struct ceph_mds_client *mdsc,
INIT_LIST_HEAD(&s->s_waiting);
INIT_LIST_HEAD(&s->s_unsafe);
s->s_num_cap_releases = 0;
+ s->s_cap_reconnect = 0;
s->s_cap_iterator = NULL;
INIT_LIST_HEAD(&s->s_cap_releases);
INIT_LIST_HEAD(&s->s_cap_releases_done);
@@ -642,6 +644,8 @@ static void __unregister_request(struct ceph_mds_client *mdsc,
req->r_unsafe_dir = NULL;
}
+ complete_all(&req->r_safe_completion);
+
ceph_mdsc_put_request(req);
}
@@ -986,7 +990,7 @@ static int remove_session_caps_cb(struct inode *inode, struct ceph_cap *cap,
dout("removing cap %p, ci is %p, inode is %p\n",
cap, ci, &ci->vfs_inode);
spin_lock(&ci->i_ceph_lock);
- __ceph_remove_cap(cap);
+ __ceph_remove_cap(cap, false);
if (!__ceph_is_any_real_caps(ci)) {
struct ceph_mds_client *mdsc =
ceph_sb_to_client(inode->i_sb)->mdsc;
@@ -1231,9 +1235,7 @@ static int trim_caps_cb(struct inode *inode, struct ceph_cap *cap, void *arg)
session->s_trim_caps--;
if (oissued) {
/* we aren't the only cap.. just remove us */
- __queue_cap_release(session, ceph_ino(inode), cap->cap_id,
- cap->mseq, cap->issue_seq);
- __ceph_remove_cap(cap);
+ __ceph_remove_cap(cap, true);
} else {
/* try to drop referring dentries */
spin_unlock(&ci->i_ceph_lock);
@@ -1416,7 +1418,6 @@ static void discard_cap_releases(struct ceph_mds_client *mdsc,
unsigned num;
dout("discard_cap_releases mds%d\n", session->s_mds);
- spin_lock(&session->s_cap_lock);
/* zero out the in-progress message */
msg = list_first_entry(&session->s_cap_releases,
@@ -1443,8 +1444,6 @@ static void discard_cap_releases(struct ceph_mds_client *mdsc,
msg->front.iov_len = sizeof(*head);
list_add(&msg->list_head, &session->s_cap_releases);
}
-
- spin_unlock(&session->s_cap_lock);
}
/*
@@ -1875,8 +1874,11 @@ static int __do_request(struct ceph_mds_client *mdsc,
int mds = -1;
int err = -EAGAIN;
- if (req->r_err || req->r_got_result)
+ if (req->r_err || req->r_got_result) {
+ if (req->r_aborted)
+ __unregister_request(mdsc, req);
goto out;
+ }
if (req->r_timeout &&
time_after_eq(jiffies, req->r_started + req->r_timeout)) {
@@ -2186,7 +2188,6 @@ static void handle_reply(struct ceph_mds_session *session, struct ceph_msg *msg)
if (head->safe) {
req->r_got_safe = true;
__unregister_request(mdsc, req);
- complete_all(&req->r_safe_completion);
if (req->r_got_unsafe) {
/*
@@ -2238,8 +2239,7 @@ static void handle_reply(struct ceph_mds_session *session, struct ceph_msg *msg)
err = ceph_fill_trace(mdsc->fsc->sb, req, req->r_session);
if (err == 0) {
if (result == 0 && (req->r_op == CEPH_MDS_OP_READDIR ||
- req->r_op == CEPH_MDS_OP_LSSNAP) &&
- rinfo->dir_nr)
+ req->r_op == CEPH_MDS_OP_LSSNAP))
ceph_readdir_prepopulate(req, req->r_session);
ceph_unreserve_caps(mdsc, &req->r_caps_reservation);
}
@@ -2490,6 +2490,7 @@ static int encode_caps_cb(struct inode *inode, struct ceph_cap *cap,
cap->seq = 0; /* reset cap seq */
cap->issue_seq = 0; /* and issue_seq */
cap->mseq = 0; /* and migrate_seq */
+ cap->cap_gen = cap->session->s_cap_gen;
if (recon_state->flock) {
rec.v2.cap_id = cpu_to_le64(cap->cap_id);
@@ -2552,6 +2553,8 @@ encode_again:
} else {
err = ceph_pagelist_append(pagelist, &rec, reclen);
}
+
+ recon_state->nr_caps++;
out_free:
kfree(path);
out_dput:
@@ -2579,6 +2582,7 @@ static void send_mds_reconnect(struct ceph_mds_client *mdsc,
struct rb_node *p;
int mds = session->s_mds;
int err = -ENOMEM;
+ int s_nr_caps;
struct ceph_pagelist *pagelist;
struct ceph_reconnect_state recon_state;
@@ -2610,20 +2614,38 @@ static void send_mds_reconnect(struct ceph_mds_client *mdsc,
dout("session %p state %s\n", session,
session_state_name(session->s_state));
+ spin_lock(&session->s_gen_ttl_lock);
+ session->s_cap_gen++;
+ spin_unlock(&session->s_gen_ttl_lock);
+
+ spin_lock(&session->s_cap_lock);
+ /*
+ * notify __ceph_remove_cap() that we are composing cap reconnect.
+ * If a cap get released before being added to the cap reconnect,
+ * __ceph_remove_cap() should skip queuing cap release.
+ */
+ session->s_cap_reconnect = 1;
/* drop old cap expires; we're about to reestablish that state */
discard_cap_releases(mdsc, session);
+ spin_unlock(&session->s_cap_lock);
/* traverse this session's caps */
- err = ceph_pagelist_encode_32(pagelist, session->s_nr_caps);
+ s_nr_caps = session->s_nr_caps;
+ err = ceph_pagelist_encode_32(pagelist, s_nr_caps);
if (err)
goto fail;
+ recon_state.nr_caps = 0;
recon_state.pagelist = pagelist;
recon_state.flock = session->s_con.peer_features & CEPH_FEATURE_FLOCK;
err = iterate_session_caps(session, encode_caps_cb, &recon_state);
if (err < 0)
goto fail;
+ spin_lock(&session->s_cap_lock);
+ session->s_cap_reconnect = 0;
+ spin_unlock(&session->s_cap_lock);
+
/*
* snaprealms. we provide mds with the ino, seq (version), and
* parent for all of our realms. If the mds has any newer info,
@@ -2646,11 +2668,18 @@ static void send_mds_reconnect(struct ceph_mds_client *mdsc,
if (recon_state.flock)
reply->hdr.version = cpu_to_le16(2);
- if (pagelist->length) {
- /* set up outbound data if we have any */
- reply->hdr.data_len = cpu_to_le32(pagelist->length);
- ceph_msg_data_add_pagelist(reply, pagelist);
+
+ /* raced with cap release? */
+ if (s_nr_caps != recon_state.nr_caps) {
+ struct page *page = list_first_entry(&pagelist->head,
+ struct page, lru);
+ __le32 *addr = kmap_atomic(page);
+ *addr = cpu_to_le32(recon_state.nr_caps);
+ kunmap_atomic(addr);
}
+
+ reply->hdr.data_len = cpu_to_le32(pagelist->length);
+ ceph_msg_data_add_pagelist(reply, pagelist);
ceph_con_send(&session->s_con, reply);
mutex_unlock(&session->s_mutex);
diff --git a/fs/ceph/mds_client.h b/fs/ceph/mds_client.h
index c2a19fbbe517..4c053d099ae4 100644
--- a/fs/ceph/mds_client.h
+++ b/fs/ceph/mds_client.h
@@ -132,6 +132,7 @@ struct ceph_mds_session {
struct list_head s_caps; /* all caps issued by this session */
int s_nr_caps, s_trim_caps;
int s_num_cap_releases;
+ int s_cap_reconnect;
struct list_head s_cap_releases; /* waiting cap_release messages */
struct list_head s_cap_releases_done; /* ready to send */
struct ceph_cap *s_cap_iterator;
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index 6014b0a3c405..ef4ac38bb614 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -741,13 +741,7 @@ extern int ceph_add_cap(struct inode *inode,
int fmode, unsigned issued, unsigned wanted,
unsigned cap, unsigned seq, u64 realmino, int flags,
struct ceph_cap_reservation *caps_reservation);
-extern void __ceph_remove_cap(struct ceph_cap *cap);
-static inline void ceph_remove_cap(struct ceph_cap *cap)
-{
- spin_lock(&cap->ci->i_ceph_lock);
- __ceph_remove_cap(cap);
- spin_unlock(&cap->ci->i_ceph_lock);
-}
+extern void __ceph_remove_cap(struct ceph_cap *cap, bool queue_release);
extern void ceph_put_cap(struct ceph_mds_client *mdsc,
struct ceph_cap *cap);
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index d9ea7ada1378..f918a998a087 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -384,6 +384,7 @@ struct smb_version_operations {
int (*clone_range)(const unsigned int, struct cifsFileInfo *src_file,
struct cifsFileInfo *target_file, u64 src_off, u64 len,
u64 dest_off);
+ int (*validate_negotiate)(const unsigned int, struct cifs_tcon *);
};
struct smb_version_values {
diff --git a/fs/cifs/ioctl.c b/fs/cifs/ioctl.c
index 409b45eefe70..77492301cc2b 100644
--- a/fs/cifs/ioctl.c
+++ b/fs/cifs/ioctl.c
@@ -26,13 +26,15 @@
#include <linux/mount.h>
#include <linux/mm.h>
#include <linux/pagemap.h>
-#include <linux/btrfs.h>
#include "cifspdu.h"
#include "cifsglob.h"
#include "cifsproto.h"
#include "cifs_debug.h"
#include "cifsfs.h"
+#define CIFS_IOCTL_MAGIC 0xCF
+#define CIFS_IOC_COPYCHUNK_FILE _IOW(CIFS_IOCTL_MAGIC, 3, int)
+
static long cifs_ioctl_clone(unsigned int xid, struct file *dst_file,
unsigned long srcfd, u64 off, u64 len, u64 destoff)
{
@@ -213,7 +215,7 @@ long cifs_ioctl(struct file *filep, unsigned int command, unsigned long arg)
cifs_dbg(FYI, "set compress flag rc %d\n", rc);
}
break;
- case BTRFS_IOC_CLONE:
+ case CIFS_IOC_COPYCHUNK_FILE:
rc = cifs_ioctl_clone(xid, filep, arg, 0, 0, 0);
break;
default:
diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index 11dde4b24f8a..757da3e54d3d 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -532,7 +532,10 @@ smb2_clone_range(const unsigned int xid,
int rc;
unsigned int ret_data_len;
struct copychunk_ioctl *pcchunk;
- char *retbuf = NULL;
+ struct copychunk_ioctl_rsp *retbuf = NULL;
+ struct cifs_tcon *tcon;
+ int chunks_copied = 0;
+ bool chunk_sizes_updated = false;
pcchunk = kmalloc(sizeof(struct copychunk_ioctl), GFP_KERNEL);
@@ -547,27 +550,96 @@ smb2_clone_range(const unsigned int xid,
/* Note: request_res_key sets res_key null only if rc !=0 */
if (rc)
- return rc;
+ goto cchunk_out;
/* For now array only one chunk long, will make more flexible later */
pcchunk->ChunkCount = __constant_cpu_to_le32(1);
pcchunk->Reserved = 0;
- pcchunk->SourceOffset = cpu_to_le64(src_off);
- pcchunk->TargetOffset = cpu_to_le64(dest_off);
- pcchunk->Length = cpu_to_le32(len);
pcchunk->Reserved2 = 0;
- /* Request that server copy to target from src file identified by key */
- rc = SMB2_ioctl(xid, tlink_tcon(trgtfile->tlink),
- trgtfile->fid.persistent_fid,
- trgtfile->fid.volatile_fid, FSCTL_SRV_COPYCHUNK_WRITE,
- true /* is_fsctl */, (char *)pcchunk,
- sizeof(struct copychunk_ioctl), &retbuf, &ret_data_len);
+ tcon = tlink_tcon(trgtfile->tlink);
- /* BB need to special case rc = EINVAL to alter chunk size */
+ while (len > 0) {
+ pcchunk->SourceOffset = cpu_to_le64(src_off);
+ pcchunk->TargetOffset = cpu_to_le64(dest_off);
+ pcchunk->Length =
+ cpu_to_le32(min_t(u32, len, tcon->max_bytes_chunk));
- cifs_dbg(FYI, "rc %d data length out %d\n", rc, ret_data_len);
+ /* Request server copy to target from src identified by key */
+ rc = SMB2_ioctl(xid, tcon, trgtfile->fid.persistent_fid,
+ trgtfile->fid.volatile_fid, FSCTL_SRV_COPYCHUNK_WRITE,
+ true /* is_fsctl */, (char *)pcchunk,
+ sizeof(struct copychunk_ioctl), (char **)&retbuf,
+ &ret_data_len);
+ if (rc == 0) {
+ if (ret_data_len !=
+ sizeof(struct copychunk_ioctl_rsp)) {
+ cifs_dbg(VFS, "invalid cchunk response size\n");
+ rc = -EIO;
+ goto cchunk_out;
+ }
+ if (retbuf->TotalBytesWritten == 0) {
+ cifs_dbg(FYI, "no bytes copied\n");
+ rc = -EIO;
+ goto cchunk_out;
+ }
+ /*
+ * Check if server claimed to write more than we asked
+ */
+ if (le32_to_cpu(retbuf->TotalBytesWritten) >
+ le32_to_cpu(pcchunk->Length)) {
+ cifs_dbg(VFS, "invalid copy chunk response\n");
+ rc = -EIO;
+ goto cchunk_out;
+ }
+ if (le32_to_cpu(retbuf->ChunksWritten) != 1) {
+ cifs_dbg(VFS, "invalid num chunks written\n");
+ rc = -EIO;
+ goto cchunk_out;
+ }
+ chunks_copied++;
+
+ src_off += le32_to_cpu(retbuf->TotalBytesWritten);
+ dest_off += le32_to_cpu(retbuf->TotalBytesWritten);
+ len -= le32_to_cpu(retbuf->TotalBytesWritten);
+
+ cifs_dbg(FYI, "Chunks %d PartialChunk %d Total %d\n",
+ le32_to_cpu(retbuf->ChunksWritten),
+ le32_to_cpu(retbuf->ChunkBytesWritten),
+ le32_to_cpu(retbuf->TotalBytesWritten));
+ } else if (rc == -EINVAL) {
+ if (ret_data_len != sizeof(struct copychunk_ioctl_rsp))
+ goto cchunk_out;
+
+ cifs_dbg(FYI, "MaxChunks %d BytesChunk %d MaxCopy %d\n",
+ le32_to_cpu(retbuf->ChunksWritten),
+ le32_to_cpu(retbuf->ChunkBytesWritten),
+ le32_to_cpu(retbuf->TotalBytesWritten));
+
+ /*
+ * Check if this is the first request using these sizes,
+ * (ie check if copy succeed once with original sizes
+ * and check if the server gave us different sizes after
+ * we already updated max sizes on previous request).
+ * if not then why is the server returning an error now
+ */
+ if ((chunks_copied != 0) || chunk_sizes_updated)
+ goto cchunk_out;
+
+ /* Check that server is not asking us to grow size */
+ if (le32_to_cpu(retbuf->ChunkBytesWritten) <
+ tcon->max_bytes_chunk)
+ tcon->max_bytes_chunk =
+ le32_to_cpu(retbuf->ChunkBytesWritten);
+ else
+ goto cchunk_out; /* server gave us bogus size */
+
+ /* No need to change MaxChunks since already set to 1 */
+ chunk_sizes_updated = true;
+ }
+ }
+cchunk_out:
kfree(pcchunk);
return rc;
}
@@ -1247,6 +1319,7 @@ struct smb_version_operations smb30_operations = {
.create_lease_buf = smb3_create_lease_buf,
.parse_lease_buf = smb3_parse_lease_buf,
.clone_range = smb2_clone_range,
+ .validate_negotiate = smb3_validate_negotiate,
};
struct smb_version_values smb20_values = {
diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
index d65270c290a1..2013234b73ad 100644
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -454,6 +454,81 @@ neg_exit:
return rc;
}
+int smb3_validate_negotiate(const unsigned int xid, struct cifs_tcon *tcon)
+{
+ int rc = 0;
+ struct validate_negotiate_info_req vneg_inbuf;
+ struct validate_negotiate_info_rsp *pneg_rsp;
+ u32 rsplen;
+
+ cifs_dbg(FYI, "validate negotiate\n");
+
+ /*
+ * validation ioctl must be signed, so no point sending this if we
+ * can not sign it. We could eventually change this to selectively
+ * sign just this, the first and only signed request on a connection.
+ * This is good enough for now since a user who wants better security
+ * would also enable signing on the mount. Having validation of
+ * negotiate info for signed connections helps reduce attack vectors
+ */
+ if (tcon->ses->server->sign == false)
+ return 0; /* validation requires signing */
+
+ vneg_inbuf.Capabilities =
+ cpu_to_le32(tcon->ses->server->vals->req_capabilities);
+ memcpy(vneg_inbuf.Guid, cifs_client_guid, SMB2_CLIENT_GUID_SIZE);
+
+ if (tcon->ses->sign)
+ vneg_inbuf.SecurityMode =
+ cpu_to_le16(SMB2_NEGOTIATE_SIGNING_REQUIRED);
+ else if (global_secflags & CIFSSEC_MAY_SIGN)
+ vneg_inbuf.SecurityMode =
+ cpu_to_le16(SMB2_NEGOTIATE_SIGNING_ENABLED);
+ else
+ vneg_inbuf.SecurityMode = 0;
+
+ vneg_inbuf.DialectCount = cpu_to_le16(1);
+ vneg_inbuf.Dialects[0] =
+ cpu_to_le16(tcon->ses->server->vals->protocol_id);
+
+ rc = SMB2_ioctl(xid, tcon, NO_FILE_ID, NO_FILE_ID,
+ FSCTL_VALIDATE_NEGOTIATE_INFO, true /* is_fsctl */,
+ (char *)&vneg_inbuf, sizeof(struct validate_negotiate_info_req),
+ (char **)&pneg_rsp, &rsplen);
+
+ if (rc != 0) {
+ cifs_dbg(VFS, "validate protocol negotiate failed: %d\n", rc);
+ return -EIO;
+ }
+
+ if (rsplen != sizeof(struct validate_negotiate_info_rsp)) {
+ cifs_dbg(VFS, "invalid size of protocol negotiate response\n");
+ return -EIO;
+ }
+
+ /* check validate negotiate info response matches what we got earlier */
+ if (pneg_rsp->Dialect !=
+ cpu_to_le16(tcon->ses->server->vals->protocol_id))
+ goto vneg_out;
+
+ if (pneg_rsp->SecurityMode != cpu_to_le16(tcon->ses->server->sec_mode))
+ goto vneg_out;
+
+ /* do not validate server guid because not saved at negprot time yet */
+
+ if ((le32_to_cpu(pneg_rsp->Capabilities) | SMB2_NT_FIND |
+ SMB2_LARGE_FILES) != tcon->ses->server->capabilities)
+ goto vneg_out;
+
+ /* validate negotiate successful */
+ cifs_dbg(FYI, "validate negotiate info successful\n");
+ return 0;
+
+vneg_out:
+ cifs_dbg(VFS, "protocol revalidation - security settings mismatch\n");
+ return -EIO;
+}
+
int
SMB2_sess_setup(const unsigned int xid, struct cifs_ses *ses,
const struct nls_table *nls_cp)
@@ -829,6 +904,8 @@ SMB2_tcon(const unsigned int xid, struct cifs_ses *ses, const char *tree,
((tcon->share_flags & SHI1005_FLAGS_DFS) == 0))
cifs_dbg(VFS, "DFS capability contradicts DFS flag\n");
init_copy_chunk_defaults(tcon);
+ if (tcon->ses->server->ops->validate_negotiate)
+ rc = tcon->ses->server->ops->validate_negotiate(xid, tcon);
tcon_exit:
free_rsp_buf(resp_buftype, rsp);
kfree(unc_path);
@@ -1214,10 +1291,17 @@ SMB2_ioctl(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid,
rc = SendReceive2(xid, ses, iov, num_iovecs, &resp_buftype, 0);
rsp = (struct smb2_ioctl_rsp *)iov[0].iov_base;
- if (rc != 0) {
+ if ((rc != 0) && (rc != -EINVAL)) {
if (tcon)
cifs_stats_fail_inc(tcon, SMB2_IOCTL_HE);
goto ioctl_exit;
+ } else if (rc == -EINVAL) {
+ if ((opcode != FSCTL_SRV_COPYCHUNK_WRITE) &&
+ (opcode != FSCTL_SRV_COPYCHUNK)) {
+ if (tcon)
+ cifs_stats_fail_inc(tcon, SMB2_IOCTL_HE);
+ goto ioctl_exit;
+ }
}
/* check if caller wants to look at return data or just return rc */
@@ -2154,11 +2238,9 @@ send_set_info(const unsigned int xid, struct cifs_tcon *tcon,
rc = SendReceive2(xid, ses, iov, num, &resp_buftype, 0);
rsp = (struct smb2_set_info_rsp *)iov[0].iov_base;
- if (rc != 0) {
+ if (rc != 0)
cifs_stats_fail_inc(tcon, SMB2_SET_INFO_HE);
- goto out;
- }
-out:
+
free_rsp_buf(resp_buftype, rsp);
kfree(iov);
return rc;
diff --git a/fs/cifs/smb2pdu.h b/fs/cifs/smb2pdu.h
index f88320bbb477..2022c542ea3a 100644
--- a/fs/cifs/smb2pdu.h
+++ b/fs/cifs/smb2pdu.h
@@ -577,13 +577,19 @@ struct copychunk_ioctl_rsp {
__le32 TotalBytesWritten;
} __packed;
-/* Response and Request are the same format */
-struct validate_negotiate_info {
+struct validate_negotiate_info_req {
__le32 Capabilities;
__u8 Guid[SMB2_CLIENT_GUID_SIZE];
__le16 SecurityMode;
__le16 DialectCount;
- __le16 Dialect[1];
+ __le16 Dialects[1]; /* dialect (someday maybe list) client asked for */
+} __packed;
+
+struct validate_negotiate_info_rsp {
+ __le32 Capabilities;
+ __u8 Guid[SMB2_CLIENT_GUID_SIZE];
+ __le16 SecurityMode;
+ __le16 Dialect; /* Dialect in use for the connection */
} __packed;
#define RSS_CAPABLE 0x00000001
diff --git a/fs/cifs/smb2proto.h b/fs/cifs/smb2proto.h
index b4eea105b08c..93adc64666f3 100644
--- a/fs/cifs/smb2proto.h
+++ b/fs/cifs/smb2proto.h
@@ -162,5 +162,6 @@ extern int smb2_lockv(const unsigned int xid, struct cifs_tcon *tcon,
struct smb2_lock_element *buf);
extern int SMB2_lease_break(const unsigned int xid, struct cifs_tcon *tcon,
__u8 *lease_key, const __le32 lease_state);
+extern int smb3_validate_negotiate(const unsigned int, struct cifs_tcon *);
#endif /* _SMB2PROTO_H */
diff --git a/fs/cifs/smbfsctl.h b/fs/cifs/smbfsctl.h
index a4b2391fe66e..0e538b5c9622 100644
--- a/fs/cifs/smbfsctl.h
+++ b/fs/cifs/smbfsctl.h
@@ -90,7 +90,7 @@
#define FSCTL_LMR_REQUEST_RESILIENCY 0x001401D4 /* BB add struct */
#define FSCTL_LMR_GET_LINK_TRACK_INF 0x001400E8 /* BB add struct */
#define FSCTL_LMR_SET_LINK_TRACK_INF 0x001400EC /* BB add struct */
-#define FSCTL_VALIDATE_NEGOTIATE_INFO 0x00140204 /* BB add struct */
+#define FSCTL_VALIDATE_NEGOTIATE_INFO 0x00140204
/* Perform server-side data movement */
#define FSCTL_SRV_COPYCHUNK 0x001440F2
#define FSCTL_SRV_COPYCHUNK_WRITE 0x001480F2
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index 79b5da2acbe1..b94f93685093 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -609,7 +609,7 @@ static int sysfs_open_file(struct inode *inode, struct file *file)
struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
struct kobject *kobj = attr_sd->s_parent->s_dir.kobj;
struct sysfs_open_file *of;
- bool has_read, has_write;
+ bool has_read, has_write, has_mmap;
int error = -EACCES;
/* need attr_sd for attr and ops, its parent for kobj */
@@ -621,6 +621,7 @@ static int sysfs_open_file(struct inode *inode, struct file *file)
has_read = battr->read || battr->mmap;
has_write = battr->write || battr->mmap;
+ has_mmap = battr->mmap;
} else {
const struct sysfs_ops *ops = sysfs_file_ops(attr_sd);
@@ -632,6 +633,7 @@ static int sysfs_open_file(struct inode *inode, struct file *file)
has_read = ops->show;
has_write = ops->store;
+ has_mmap = false;
}
/* check perms and supported operations */
@@ -649,7 +651,23 @@ static int sysfs_open_file(struct inode *inode, struct file *file)
if (!of)
goto err_out;
- mutex_init(&of->mutex);
+ /*
+ * The following is done to give a different lockdep key to
+ * @of->mutex for files which implement mmap. This is a rather
+ * crude way to avoid false positive lockdep warning around
+ * mm->mmap_sem - mmap nests @of->mutex under mm->mmap_sem and
+ * reading /sys/block/sda/trace/act_mask grabs sr_mutex, under
+ * which mm->mmap_sem nests, while holding @of->mutex. As each
+ * open file has a separate mutex, it's okay as long as those don't
+ * happen on the same file. At this point, we can't easily give
+ * each file a separate locking class. Let's differentiate on
+ * whether the file has mmap or not for now.
+ */
+ if (has_mmap)
+ mutex_init(&of->mutex);
+ else
+ mutex_init(&of->mutex);
+
of->sd = attr_sd;
of->file = file;
diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h
index d98c67001840..3ea214cff349 100644
--- a/include/acpi/acconfig.h
+++ b/include/acpi/acconfig.h
@@ -83,7 +83,9 @@
* Should the subsystem abort the loading of an ACPI table if the
* table checksum is incorrect?
*/
+#ifndef ACPI_CHECKSUM_ABORT
#define ACPI_CHECKSUM_ABORT FALSE
+#endif
/*
* Generate a version of ACPICA that only supports "reduced hardware"
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 7b2de026a4f3..c602c7718421 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -100,6 +100,7 @@ enum acpi_hotplug_mode {
struct acpi_hotplug_profile {
struct kobject kobj;
bool enabled:1;
+ bool ignore:1;
enum acpi_hotplug_mode mode;
};
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index d8f9457755b4..4278aba96503 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -46,7 +46,7 @@
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20130927
+#define ACPI_CA_VERSION 0x20131115
#include <acpi/acconfig.h>
#include <acpi/actypes.h>
diff --git a/include/asm-generic/simd.h b/include/asm-generic/simd.h
new file mode 100644
index 000000000000..f57eb7b5c23b
--- /dev/null
+++ b/include/asm-generic/simd.h
@@ -0,0 +1,14 @@
+
+#include <linux/hardirq.h>
+
+/*
+ * may_use_simd - whether it is allowable at this time to issue SIMD
+ * instructions or access the SIMD register file
+ *
+ * As architectures typically don't preserve the SIMD register file when
+ * taking an interrupt, !in_interrupt() should be a reasonable default.
+ */
+static __must_check inline bool may_use_simd(void)
+{
+ return !in_interrupt();
+}
diff --git a/arch/x86/include/asm/crypto/ablk_helper.h b/include/crypto/ablk_helper.h
index 4f93df50c23e..4f93df50c23e 100644
--- a/arch/x86/include/asm/crypto/ablk_helper.h
+++ b/include/crypto/ablk_helper.h
diff --git a/include/crypto/algapi.h b/include/crypto/algapi.h
index 418d270e1806..e73c19e90e38 100644
--- a/include/crypto/algapi.h
+++ b/include/crypto/algapi.h
@@ -386,5 +386,21 @@ static inline int crypto_requires_sync(u32 type, u32 mask)
return (type ^ CRYPTO_ALG_ASYNC) & mask & CRYPTO_ALG_ASYNC;
}
-#endif /* _CRYPTO_ALGAPI_H */
+noinline unsigned long __crypto_memneq(const void *a, const void *b, size_t size);
+
+/**
+ * crypto_memneq - Compare two areas of memory without leaking
+ * timing information.
+ *
+ * @a: One area of memory
+ * @b: Another area of memory
+ * @size: The size of the area.
+ *
+ * Returns 0 when data is equal, 1 otherwise.
+ */
+static inline int crypto_memneq(const void *a, const void *b, size_t size)
+{
+ return __crypto_memneq(a, b, size) != 0UL ? 1 : 0;
+}
+#endif /* _CRYPTO_ALGAPI_H */
diff --git a/include/crypto/authenc.h b/include/crypto/authenc.h
index e47b044929a8..6775059539b5 100644
--- a/include/crypto/authenc.h
+++ b/include/crypto/authenc.h
@@ -23,5 +23,15 @@ struct crypto_authenc_key_param {
__be32 enckeylen;
};
-#endif /* _CRYPTO_AUTHENC_H */
+struct crypto_authenc_keys {
+ const u8 *authkey;
+ const u8 *enckey;
+
+ unsigned int authkeylen;
+ unsigned int enckeylen;
+};
+int crypto_authenc_extractkeys(struct crypto_authenc_keys *keys, const u8 *key,
+ unsigned int keylen);
+
+#endif /* _CRYPTO_AUTHENC_H */
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
index 656a27efb2c8..82eac610ce1a 100644
--- a/include/linux/gpio/driver.h
+++ b/include/linux/gpio/driver.h
@@ -125,6 +125,13 @@ extern struct gpio_chip *gpiochip_find(void *data,
int gpiod_lock_as_irq(struct gpio_desc *desc);
void gpiod_unlock_as_irq(struct gpio_desc *desc);
+enum gpio_lookup_flags {
+ GPIO_ACTIVE_HIGH = (0 << 0),
+ GPIO_ACTIVE_LOW = (1 << 0),
+ GPIO_OPEN_DRAIN = (1 << 1),
+ GPIO_OPEN_SOURCE = (1 << 2),
+};
+
/**
* Lookup table for associating GPIOs to specific devices and functions using
* platform data.
@@ -152,9 +159,9 @@ struct gpiod_lookup {
*/
unsigned int idx;
/*
- * mask of GPIOF_* values
+ * mask of GPIO_* values
*/
- unsigned long flags;
+ enum gpio_lookup_flags flags;
};
/*
diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h
index a265af294ea4..206a2af6b62b 100644
--- a/include/linux/hid-sensor-hub.h
+++ b/include/linux/hid-sensor-hub.h
@@ -21,6 +21,8 @@
#include <linux/hid.h>
#include <linux/hid-sensor-ids.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
/**
* struct hid_sensor_hub_attribute_info - Attribute info
@@ -184,6 +186,7 @@ struct hid_sensor_common {
struct platform_device *pdev;
unsigned usage_id;
bool data_ready;
+ struct iio_trigger *trigger;
struct hid_sensor_hub_attribute_info poll;
struct hid_sensor_hub_attribute_info report_state;
struct hid_sensor_hub_attribute_info power_state;
diff --git a/include/linux/padata.h b/include/linux/padata.h
index 86292beebfe2..438694650471 100644
--- a/include/linux/padata.h
+++ b/include/linux/padata.h
@@ -129,10 +129,9 @@ struct parallel_data {
struct padata_serial_queue __percpu *squeue;
atomic_t reorder_objects;
atomic_t refcnt;
+ atomic_t seq_nr;
struct padata_cpumask cpumask;
spinlock_t lock ____cacheline_aligned;
- spinlock_t seq_lock;
- unsigned int seq_nr;
unsigned int processed;
struct timer_list timer;
};
diff --git a/include/linux/slab.h b/include/linux/slab.h
index c2bba248fa63..1e2f4fe12773 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -388,10 +388,55 @@ static __always_inline void *kmalloc_large(size_t size, gfp_t flags)
/**
* kmalloc - allocate memory
* @size: how many bytes of memory are required.
- * @flags: the type of memory to allocate (see kcalloc).
+ * @flags: the type of memory to allocate.
*
* kmalloc is the normal method of allocating memory
* for objects smaller than page size in the kernel.
+ *
+ * The @flags argument may be one of:
+ *
+ * %GFP_USER - Allocate memory on behalf of user. May sleep.
+ *
+ * %GFP_KERNEL - Allocate normal kernel ram. May sleep.
+ *
+ * %GFP_ATOMIC - Allocation will not sleep. May use emergency pools.
+ * For example, use this inside interrupt handlers.
+ *
+ * %GFP_HIGHUSER - Allocate pages from high memory.
+ *
+ * %GFP_NOIO - Do not do any I/O at all while trying to get memory.
+ *
+ * %GFP_NOFS - Do not make any fs calls while trying to get memory.
+ *
+ * %GFP_NOWAIT - Allocation will not sleep.
+ *
+ * %GFP_THISNODE - Allocate node-local memory only.
+ *
+ * %GFP_DMA - Allocation suitable for DMA.
+ * Should only be used for kmalloc() caches. Otherwise, use a
+ * slab created with SLAB_DMA.
+ *
+ * Also it is possible to set different flags by OR'ing
+ * in one or more of the following additional @flags:
+ *
+ * %__GFP_COLD - Request cache-cold pages instead of
+ * trying to return cache-warm pages.
+ *
+ * %__GFP_HIGH - This allocation has high priority and may use emergency pools.
+ *
+ * %__GFP_NOFAIL - Indicate that this allocation is in no way allowed to fail
+ * (think twice before using).
+ *
+ * %__GFP_NORETRY - If memory is not immediately available,
+ * then give up at once.
+ *
+ * %__GFP_NOWARN - If allocation fails, don't issue any warnings.
+ *
+ * %__GFP_REPEAT - If allocation fails initially, try once more before failing.
+ *
+ * There are other flags available as well, but these are not intended
+ * for general use, and so are not documented here. For a full list of
+ * potential flags, always refer to linux/gfp.h.
*/
static __always_inline void *kmalloc(size_t size, gfp_t flags)
{
@@ -502,61 +547,6 @@ int cache_show(struct kmem_cache *s, struct seq_file *m);
void print_slabinfo_header(struct seq_file *m);
/**
- * kmalloc - allocate memory
- * @size: how many bytes of memory are required.
- * @flags: the type of memory to allocate.
- *
- * The @flags argument may be one of:
- *
- * %GFP_USER - Allocate memory on behalf of user. May sleep.
- *
- * %GFP_KERNEL - Allocate normal kernel ram. May sleep.
- *
- * %GFP_ATOMIC - Allocation will not sleep. May use emergency pools.
- * For example, use this inside interrupt handlers.
- *
- * %GFP_HIGHUSER - Allocate pages from high memory.
- *
- * %GFP_NOIO - Do not do any I/O at all while trying to get memory.
- *
- * %GFP_NOFS - Do not make any fs calls while trying to get memory.
- *
- * %GFP_NOWAIT - Allocation will not sleep.
- *
- * %GFP_THISNODE - Allocate node-local memory only.
- *
- * %GFP_DMA - Allocation suitable for DMA.
- * Should only be used for kmalloc() caches. Otherwise, use a
- * slab created with SLAB_DMA.
- *
- * Also it is possible to set different flags by OR'ing
- * in one or more of the following additional @flags:
- *
- * %__GFP_COLD - Request cache-cold pages instead of
- * trying to return cache-warm pages.
- *
- * %__GFP_HIGH - This allocation has high priority and may use emergency pools.
- *
- * %__GFP_NOFAIL - Indicate that this allocation is in no way allowed to fail
- * (think twice before using).
- *
- * %__GFP_NORETRY - If memory is not immediately available,
- * then give up at once.
- *
- * %__GFP_NOWARN - If allocation fails, don't issue any warnings.
- *
- * %__GFP_REPEAT - If allocation fails initially, try once more before failing.
- *
- * There are other flags available as well, but these are not intended
- * for general use, and so are not documented here. For a full list of
- * potential flags, always refer to linux/gfp.h.
- *
- * kmalloc is the normal method of allocating memory
- * in the kernel.
- */
-static __always_inline void *kmalloc(size_t size, gfp_t flags);
-
-/**
* kmalloc_array - allocate memory for an array.
* @n: number of elements.
* @size: element size.
diff --git a/include/linux/tegra-powergate.h b/include/linux/tegra-powergate.h
index c98cfa406952..fd4498329c7c 100644
--- a/include/linux/tegra-powergate.h
+++ b/include/linux/tegra-powergate.h
@@ -45,6 +45,7 @@ struct clk;
#define TEGRA_POWERGATE_3D0 TEGRA_POWERGATE_3D
+#ifdef CONFIG_ARCH_TEGRA
int tegra_powergate_is_powered(int id);
int tegra_powergate_power_on(int id);
int tegra_powergate_power_off(int id);
@@ -52,5 +53,31 @@ int tegra_powergate_remove_clamping(int id);
/* Must be called with clk disabled, and returns with clk enabled */
int tegra_powergate_sequence_power_up(int id, struct clk *clk);
+#else
+static inline int tegra_powergate_is_powered(int id)
+{
+ return -ENOSYS;
+}
+
+static inline int tegra_powergate_power_on(int id)
+{
+ return -ENOSYS;
+}
+
+static inline int tegra_powergate_power_off(int id)
+{
+ return -ENOSYS;
+}
+
+static inline int tegra_powergate_remove_clamping(int id)
+{
+ return -ENOSYS;
+}
+
+static inline int tegra_powergate_sequence_power_up(int id, struct clk *clk)
+{
+ return -ENOSYS;
+}
+#endif
#endif /* _MACH_TEGRA_POWERGATE_H_ */
diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h
index 52594b20179e..d17a35c6537e 100644
--- a/include/trace/ftrace.h
+++ b/include/trace/ftrace.h
@@ -372,7 +372,8 @@ ftrace_define_fields_##call(struct ftrace_event_call *event_call) \
__data_size += (len) * sizeof(type);
#undef __string
-#define __string(item, src) __dynamic_array(char, item, strlen(src) + 1)
+#define __string(item, src) __dynamic_array(char, item, \
+ strlen((src) ? (const char *)(src) : "(null)") + 1)
#undef DECLARE_EVENT_CLASS
#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print) \
@@ -501,7 +502,7 @@ static inline notrace int ftrace_get_offsets_##call( \
#undef __assign_str
#define __assign_str(dst, src) \
- strcpy(__get_str(dst), src);
+ strcpy(__get_str(dst), (src) ? (const char *)(src) : "(null)");
#undef TP_fast_assign
#define TP_fast_assign(args...) args
diff --git a/kernel/extable.c b/kernel/extable.c
index 832cb28105bb..763faf037ec1 100644
--- a/kernel/extable.c
+++ b/kernel/extable.c
@@ -61,7 +61,7 @@ const struct exception_table_entry *search_exception_tables(unsigned long addr)
static inline int init_kernel_text(unsigned long addr)
{
if (addr >= (unsigned long)_sinittext &&
- addr <= (unsigned long)_einittext)
+ addr < (unsigned long)_einittext)
return 1;
return 0;
}
@@ -69,7 +69,7 @@ static inline int init_kernel_text(unsigned long addr)
int core_kernel_text(unsigned long addr)
{
if (addr >= (unsigned long)_stext &&
- addr <= (unsigned long)_etext)
+ addr < (unsigned long)_etext)
return 1;
if (system_state == SYSTEM_BOOTING &&
diff --git a/kernel/padata.c b/kernel/padata.c
index 07af2c95dcfe..2abd25d79cc8 100644
--- a/kernel/padata.c
+++ b/kernel/padata.c
@@ -46,6 +46,7 @@ static int padata_index_to_cpu(struct parallel_data *pd, int cpu_index)
static int padata_cpu_hash(struct parallel_data *pd)
{
+ unsigned int seq_nr;
int cpu_index;
/*
@@ -53,10 +54,8 @@ static int padata_cpu_hash(struct parallel_data *pd)
* seq_nr mod. number of cpus in use.
*/
- spin_lock(&pd->seq_lock);
- cpu_index = pd->seq_nr % cpumask_weight(pd->cpumask.pcpu);
- pd->seq_nr++;
- spin_unlock(&pd->seq_lock);
+ seq_nr = atomic_inc_return(&pd->seq_nr);
+ cpu_index = seq_nr % cpumask_weight(pd->cpumask.pcpu);
return padata_index_to_cpu(pd, cpu_index);
}
@@ -429,7 +428,7 @@ static struct parallel_data *padata_alloc_pd(struct padata_instance *pinst,
padata_init_pqueues(pd);
padata_init_squeues(pd);
setup_timer(&pd->timer, padata_reorder_timer, (unsigned long)pd);
- pd->seq_nr = 0;
+ atomic_set(&pd->seq_nr, -1);
atomic_set(&pd->reorder_objects, 0);
atomic_set(&pd->refcnt, 0);
pd->pinst = pinst;
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 22fa55696760..0e9f9eaade2f 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -367,9 +367,6 @@ static int remove_ftrace_list_ops(struct ftrace_ops **list,
static int __register_ftrace_function(struct ftrace_ops *ops)
{
- if (unlikely(ftrace_disabled))
- return -ENODEV;
-
if (FTRACE_WARN_ON(ops == &global_ops))
return -EINVAL;
@@ -428,9 +425,6 @@ static int __unregister_ftrace_function(struct ftrace_ops *ops)
{
int ret;
- if (ftrace_disabled)
- return -ENODEV;
-
if (WARN_ON(!(ops->flags & FTRACE_OPS_FL_ENABLED)))
return -EBUSY;
@@ -2088,10 +2082,15 @@ static void ftrace_startup_enable(int command)
static int ftrace_startup(struct ftrace_ops *ops, int command)
{
bool hash_enable = true;
+ int ret;
if (unlikely(ftrace_disabled))
return -ENODEV;
+ ret = __register_ftrace_function(ops);
+ if (ret)
+ return ret;
+
ftrace_start_up++;
command |= FTRACE_UPDATE_CALLS;
@@ -2113,12 +2112,17 @@ static int ftrace_startup(struct ftrace_ops *ops, int command)
return 0;
}
-static void ftrace_shutdown(struct ftrace_ops *ops, int command)
+static int ftrace_shutdown(struct ftrace_ops *ops, int command)
{
bool hash_disable = true;
+ int ret;
if (unlikely(ftrace_disabled))
- return;
+ return -ENODEV;
+
+ ret = __unregister_ftrace_function(ops);
+ if (ret)
+ return ret;
ftrace_start_up--;
/*
@@ -2153,9 +2157,10 @@ static void ftrace_shutdown(struct ftrace_ops *ops, int command)
}
if (!command || !ftrace_enabled)
- return;
+ return 0;
ftrace_run_update_code(command);
+ return 0;
}
static void ftrace_startup_sysctl(void)
@@ -3060,16 +3065,13 @@ static void __enable_ftrace_function_probe(void)
if (i == FTRACE_FUNC_HASHSIZE)
return;
- ret = __register_ftrace_function(&trace_probe_ops);
- if (!ret)
- ret = ftrace_startup(&trace_probe_ops, 0);
+ ret = ftrace_startup(&trace_probe_ops, 0);
ftrace_probe_registered = 1;
}
static void __disable_ftrace_function_probe(void)
{
- int ret;
int i;
if (!ftrace_probe_registered)
@@ -3082,9 +3084,7 @@ static void __disable_ftrace_function_probe(void)
}
/* no more funcs left */
- ret = __unregister_ftrace_function(&trace_probe_ops);
- if (!ret)
- ftrace_shutdown(&trace_probe_ops, 0);
+ ftrace_shutdown(&trace_probe_ops, 0);
ftrace_probe_registered = 0;
}
@@ -4366,12 +4366,15 @@ core_initcall(ftrace_nodyn_init);
static inline int ftrace_init_dyn_debugfs(struct dentry *d_tracer) { return 0; }
static inline void ftrace_startup_enable(int command) { }
/* Keep as macros so we do not need to define the commands */
-# define ftrace_startup(ops, command) \
- ({ \
- (ops)->flags |= FTRACE_OPS_FL_ENABLED; \
- 0; \
+# define ftrace_startup(ops, command) \
+ ({ \
+ int ___ret = __register_ftrace_function(ops); \
+ if (!___ret) \
+ (ops)->flags |= FTRACE_OPS_FL_ENABLED; \
+ ___ret; \
})
-# define ftrace_shutdown(ops, command) do { } while (0)
+# define ftrace_shutdown(ops, command) __unregister_ftrace_function(ops)
+
# define ftrace_startup_sysctl() do { } while (0)
# define ftrace_shutdown_sysctl() do { } while (0)
@@ -4780,9 +4783,7 @@ int register_ftrace_function(struct ftrace_ops *ops)
mutex_lock(&ftrace_lock);
- ret = __register_ftrace_function(ops);
- if (!ret)
- ret = ftrace_startup(ops, 0);
+ ret = ftrace_startup(ops, 0);
mutex_unlock(&ftrace_lock);
@@ -4801,9 +4802,7 @@ int unregister_ftrace_function(struct ftrace_ops *ops)
int ret;
mutex_lock(&ftrace_lock);
- ret = __unregister_ftrace_function(ops);
- if (!ret)
- ftrace_shutdown(ops, 0);
+ ret = ftrace_shutdown(ops, 0);
mutex_unlock(&ftrace_lock);
return ret;
@@ -4997,6 +4996,13 @@ ftrace_suspend_notifier_call(struct notifier_block *bl, unsigned long state,
return NOTIFY_DONE;
}
+/* Just a place holder for function graph */
+static struct ftrace_ops fgraph_ops __read_mostly = {
+ .func = ftrace_stub,
+ .flags = FTRACE_OPS_FL_STUB | FTRACE_OPS_FL_GLOBAL |
+ FTRACE_OPS_FL_RECURSION_SAFE,
+};
+
int register_ftrace_graph(trace_func_graph_ret_t retfunc,
trace_func_graph_ent_t entryfunc)
{
@@ -5023,7 +5029,7 @@ int register_ftrace_graph(trace_func_graph_ret_t retfunc,
ftrace_graph_return = retfunc;
ftrace_graph_entry = entryfunc;
- ret = ftrace_startup(&global_ops, FTRACE_START_FUNC_RET);
+ ret = ftrace_startup(&fgraph_ops, FTRACE_START_FUNC_RET);
out:
mutex_unlock(&ftrace_lock);
@@ -5040,7 +5046,7 @@ void unregister_ftrace_graph(void)
ftrace_graph_active--;
ftrace_graph_return = (trace_func_graph_ret_t)ftrace_stub;
ftrace_graph_entry = ftrace_graph_entry_stub;
- ftrace_shutdown(&global_ops, FTRACE_STOP_FUNC_RET);
+ ftrace_shutdown(&fgraph_ops, FTRACE_STOP_FUNC_RET);
unregister_pm_notifier(&ftrace_suspend_notifier);
unregister_trace_sched_switch(ftrace_graph_probe_sched_switch, NULL);
diff --git a/lib/lockref.c b/lib/lockref.c
index d2b123f8456b..f07a40d33871 100644
--- a/lib/lockref.c
+++ b/lib/lockref.c
@@ -1,5 +1,6 @@
#include <linux/export.h>
#include <linux/lockref.h>
+#include <linux/mutex.h>
#if USE_CMPXCHG_LOCKREF
@@ -12,14 +13,6 @@
#endif
/*
- * Allow architectures to override the default cpu_relax() within CMPXCHG_LOOP.
- * This is useful for architectures with an expensive cpu_relax().
- */
-#ifndef arch_mutex_cpu_relax
-# define arch_mutex_cpu_relax() cpu_relax()
-#endif
-
-/*
* Note that the "cmpxchg()" reloads the "old" value for the
* failure case.
*/
diff --git a/security/integrity/digsig.c b/security/integrity/digsig.c
index 77ca965ab684..b4af4ebc5be2 100644
--- a/security/integrity/digsig.c
+++ b/security/integrity/digsig.c
@@ -13,9 +13,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/err.h>
-#include <linux/sched.h>
#include <linux/rbtree.h>
-#include <linux/cred.h>
#include <linux/key-type.h>
#include <linux/digsig.h>
@@ -23,19 +21,11 @@
static struct key *keyring[INTEGRITY_KEYRING_MAX];
-#ifdef CONFIG_IMA_TRUSTED_KEYRING
-static const char *keyring_name[INTEGRITY_KEYRING_MAX] = {
- ".evm",
- ".module",
- ".ima",
-};
-#else
static const char *keyring_name[INTEGRITY_KEYRING_MAX] = {
"_evm",
"_module",
"_ima",
};
-#endif
int integrity_digsig_verify(const unsigned int id, const char *sig, int siglen,
const char *digest, int digestlen)
@@ -45,7 +35,7 @@ int integrity_digsig_verify(const unsigned int id, const char *sig, int siglen,
if (!keyring[id]) {
keyring[id] =
- request_key(&key_type_keyring, keyring_name[id], NULL);
+ request_key(&key_type_keyring, keyring_name[id], NULL);
if (IS_ERR(keyring[id])) {
int err = PTR_ERR(keyring[id]);
pr_err("no %s keyring: %d\n", keyring_name[id], err);
@@ -66,21 +56,3 @@ int integrity_digsig_verify(const unsigned int id, const char *sig, int siglen,
return -EOPNOTSUPP;
}
-
-int integrity_init_keyring(const unsigned int id)
-{
- const struct cred *cred = current_cred();
- const struct user_struct *user = cred->user;
-
- keyring[id] = keyring_alloc(keyring_name[id], KUIDT_INIT(0),
- KGIDT_INIT(0), cred,
- ((KEY_POS_ALL & ~KEY_POS_SETATTR) |
- KEY_USR_VIEW | KEY_USR_READ),
- KEY_ALLOC_NOT_IN_QUOTA, user->uid_keyring);
- if (!IS_ERR(keyring[id]))
- set_bit(KEY_FLAG_TRUSTED_ONLY, &keyring[id]->flags);
- else
- pr_info("Can't allocate %s keyring (%ld)\n",
- keyring_name[id], PTR_ERR(keyring[id]));
- return 0;
-}
diff --git a/security/integrity/ima/Kconfig b/security/integrity/ima/Kconfig
index dad8d4ca2437..81a27971d884 100644
--- a/security/integrity/ima/Kconfig
+++ b/security/integrity/ima/Kconfig
@@ -123,11 +123,3 @@ config IMA_APPRAISE
For more information on integrity appraisal refer to:
<http://linux-ima.sourceforge.net>
If unsure, say N.
-
-config IMA_TRUSTED_KEYRING
- bool "Require all keys on the _ima keyring be signed"
- depends on IMA_APPRAISE && SYSTEM_TRUSTED_KEYRING
- default y
- help
- This option requires that all keys added to the _ima
- keyring be signed by a key on the system trusted keyring.
diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h
index bf03c6a16cc8..9636e17c9f5d 100644
--- a/security/integrity/ima/ima.h
+++ b/security/integrity/ima/ima.h
@@ -26,7 +26,8 @@
#include "../integrity.h"
-enum ima_show_type { IMA_SHOW_BINARY, IMA_SHOW_ASCII };
+enum ima_show_type { IMA_SHOW_BINARY, IMA_SHOW_BINARY_NO_FIELD_LEN,
+ IMA_SHOW_ASCII };
enum tpm_pcrs { TPM_PCR0 = 0, TPM_PCR8 = 8 };
/* digest size for IMA, fits SHA1 or MD5 */
@@ -97,7 +98,8 @@ int ima_add_template_entry(struct ima_template_entry *entry, int violation,
const char *op, struct inode *inode,
const unsigned char *filename);
int ima_calc_file_hash(struct file *file, struct ima_digest_data *hash);
-int ima_calc_field_array_hash(struct ima_field_data *field_data, int num_fields,
+int ima_calc_field_array_hash(struct ima_field_data *field_data,
+ struct ima_template_desc *desc, int num_fields,
struct ima_digest_data *hash);
int __init ima_calc_boot_aggregate(struct ima_digest_data *hash);
void ima_add_violation(struct file *file, const unsigned char *filename,
diff --git a/security/integrity/ima/ima_api.c b/security/integrity/ima/ima_api.c
index 0e7540863fc2..80374842fe0b 100644
--- a/security/integrity/ima/ima_api.c
+++ b/security/integrity/ima/ima_api.c
@@ -94,6 +94,7 @@ int ima_store_template(struct ima_template_entry *entry,
/* this function uses default algo */
hash.hdr.algo = HASH_ALGO_SHA1;
result = ima_calc_field_array_hash(&entry->template_data[0],
+ entry->template_desc,
num_fields, &hash.hdr);
if (result < 0) {
integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode,
diff --git a/security/integrity/ima/ima_appraise.c b/security/integrity/ima/ima_appraise.c
index 46353ee517f6..734e9468aca0 100644
--- a/security/integrity/ima/ima_appraise.c
+++ b/security/integrity/ima/ima_appraise.c
@@ -381,14 +381,3 @@ int ima_inode_removexattr(struct dentry *dentry, const char *xattr_name)
}
return result;
}
-
-#ifdef CONFIG_IMA_TRUSTED_KEYRING
-static int __init init_ima_keyring(void)
-{
- int ret;
-
- ret = integrity_init_keyring(INTEGRITY_KEYRING_IMA);
- return 0;
-}
-late_initcall(init_ima_keyring);
-#endif
diff --git a/security/integrity/ima/ima_crypto.c b/security/integrity/ima/ima_crypto.c
index 676e0292dfec..fdf60def52e9 100644
--- a/security/integrity/ima/ima_crypto.c
+++ b/security/integrity/ima/ima_crypto.c
@@ -140,6 +140,7 @@ int ima_calc_file_hash(struct file *file, struct ima_digest_data *hash)
* Calculate the hash of template data
*/
static int ima_calc_field_array_hash_tfm(struct ima_field_data *field_data,
+ struct ima_template_desc *td,
int num_fields,
struct ima_digest_data *hash,
struct crypto_shash *tfm)
@@ -160,9 +161,13 @@ static int ima_calc_field_array_hash_tfm(struct ima_field_data *field_data,
return rc;
for (i = 0; i < num_fields; i++) {
- rc = crypto_shash_update(&desc.shash,
- (const u8 *) &field_data[i].len,
- sizeof(field_data[i].len));
+ if (strcmp(td->name, IMA_TEMPLATE_IMA_NAME) != 0) {
+ rc = crypto_shash_update(&desc.shash,
+ (const u8 *) &field_data[i].len,
+ sizeof(field_data[i].len));
+ if (rc)
+ break;
+ }
rc = crypto_shash_update(&desc.shash, field_data[i].data,
field_data[i].len);
if (rc)
@@ -175,7 +180,8 @@ static int ima_calc_field_array_hash_tfm(struct ima_field_data *field_data,
return rc;
}
-int ima_calc_field_array_hash(struct ima_field_data *field_data, int num_fields,
+int ima_calc_field_array_hash(struct ima_field_data *field_data,
+ struct ima_template_desc *desc, int num_fields,
struct ima_digest_data *hash)
{
struct crypto_shash *tfm;
@@ -185,7 +191,8 @@ int ima_calc_field_array_hash(struct ima_field_data *field_data, int num_fields,
if (IS_ERR(tfm))
return PTR_ERR(tfm);
- rc = ima_calc_field_array_hash_tfm(field_data, num_fields, hash, tfm);
+ rc = ima_calc_field_array_hash_tfm(field_data, desc, num_fields,
+ hash, tfm);
ima_free_tfm(tfm);
diff --git a/security/integrity/ima/ima_fs.c b/security/integrity/ima/ima_fs.c
index d47a7c86a21d..db01125926bd 100644
--- a/security/integrity/ima/ima_fs.c
+++ b/security/integrity/ima/ima_fs.c
@@ -120,6 +120,7 @@ static int ima_measurements_show(struct seq_file *m, void *v)
struct ima_template_entry *e;
int namelen;
u32 pcr = CONFIG_IMA_MEASURE_PCR_IDX;
+ bool is_ima_template = false;
int i;
/* get entry */
@@ -145,14 +146,21 @@ static int ima_measurements_show(struct seq_file *m, void *v)
ima_putc(m, e->template_desc->name, namelen);
/* 5th: template length (except for 'ima' template) */
- if (strcmp(e->template_desc->name, IMA_TEMPLATE_IMA_NAME) != 0)
+ if (strcmp(e->template_desc->name, IMA_TEMPLATE_IMA_NAME) == 0)
+ is_ima_template = true;
+
+ if (!is_ima_template)
ima_putc(m, &e->template_data_len,
sizeof(e->template_data_len));
/* 6th: template specific data */
for (i = 0; i < e->template_desc->num_fields; i++) {
- e->template_desc->fields[i]->field_show(m, IMA_SHOW_BINARY,
- &e->template_data[i]);
+ enum ima_show_type show = IMA_SHOW_BINARY;
+ struct ima_template_field *field = e->template_desc->fields[i];
+
+ if (is_ima_template && strcmp(field->field_id, "d") == 0)
+ show = IMA_SHOW_BINARY_NO_FIELD_LEN;
+ field->field_show(m, show, &e->template_data[i]);
}
return 0;
}
diff --git a/security/integrity/ima/ima_template.c b/security/integrity/ima/ima_template.c
index 4e5da990630b..913e1927f916 100644
--- a/security/integrity/ima/ima_template.c
+++ b/security/integrity/ima/ima_template.c
@@ -90,7 +90,7 @@ static struct ima_template_field *lookup_template_field(const char *field_id)
return NULL;
}
-static int template_fmt_size(char *template_fmt)
+static int template_fmt_size(const char *template_fmt)
{
char c;
int template_fmt_len = strlen(template_fmt);
@@ -106,23 +106,28 @@ static int template_fmt_size(char *template_fmt)
return j + 1;
}
-static int template_desc_init_fields(char *template_fmt,
+static int template_desc_init_fields(const char *template_fmt,
struct ima_template_field ***fields,
int *num_fields)
{
- char *c, *template_fmt_ptr = template_fmt;
+ char *c, *template_fmt_copy;
int template_num_fields = template_fmt_size(template_fmt);
int i, result = 0;
if (template_num_fields > IMA_TEMPLATE_NUM_FIELDS_MAX)
return -EINVAL;
+ /* copying is needed as strsep() modifies the original buffer */
+ template_fmt_copy = kstrdup(template_fmt, GFP_KERNEL);
+ if (template_fmt_copy == NULL)
+ return -ENOMEM;
+
*fields = kzalloc(template_num_fields * sizeof(*fields), GFP_KERNEL);
if (*fields == NULL) {
result = -ENOMEM;
goto out;
}
- for (i = 0; (c = strsep(&template_fmt_ptr, "|")) != NULL &&
+ for (i = 0; (c = strsep(&template_fmt_copy, "|")) != NULL &&
i < template_num_fields; i++) {
struct ima_template_field *f = lookup_template_field(c);
@@ -133,10 +138,12 @@ static int template_desc_init_fields(char *template_fmt,
(*fields)[i] = f;
}
*num_fields = i;
- return 0;
out:
- kfree(*fields);
- *fields = NULL;
+ if (result < 0) {
+ kfree(*fields);
+ *fields = NULL;
+ }
+ kfree(template_fmt_copy);
return result;
}
diff --git a/security/integrity/ima/ima_template_lib.c b/security/integrity/ima/ima_template_lib.c
index 6d66ad6ed265..c38adcc910fb 100644
--- a/security/integrity/ima/ima_template_lib.c
+++ b/security/integrity/ima/ima_template_lib.c
@@ -109,9 +109,12 @@ static void ima_show_template_data_binary(struct seq_file *m,
enum data_formats datafmt,
struct ima_field_data *field_data)
{
- ima_putc(m, &field_data->len, sizeof(u32));
+ if (show != IMA_SHOW_BINARY_NO_FIELD_LEN)
+ ima_putc(m, &field_data->len, sizeof(u32));
+
if (!field_data->len)
return;
+
ima_putc(m, field_data->data, field_data->len);
}
@@ -125,6 +128,7 @@ static void ima_show_template_field_data(struct seq_file *m,
ima_show_template_data_ascii(m, show, datafmt, field_data);
break;
case IMA_SHOW_BINARY:
+ case IMA_SHOW_BINARY_NO_FIELD_LEN:
ima_show_template_data_binary(m, show, datafmt, field_data);
break;
default:
diff --git a/security/integrity/integrity.h b/security/integrity/integrity.h
index b9e7c133734a..2fb5e53e927f 100644
--- a/security/integrity/integrity.h
+++ b/security/integrity/integrity.h
@@ -137,19 +137,12 @@ static inline int integrity_digsig_verify(const unsigned int id,
#ifdef CONFIG_INTEGRITY_ASYMMETRIC_KEYS
int asymmetric_verify(struct key *keyring, const char *sig,
int siglen, const char *data, int datalen);
-
-int integrity_init_keyring(const unsigned int id);
#else
static inline int asymmetric_verify(struct key *keyring, const char *sig,
int siglen, const char *data, int datalen)
{
return -EOPNOTSUPP;
}
-
-static int integrity_init_keyring(const unsigned int id)
-{
- return 0;
-}
#endif
#ifdef CONFIG_INTEGRITY_AUDIT
diff --git a/tools/power/cpupower/man/cpupower-idle-info.1 b/tools/power/cpupower/man/cpupower-idle-info.1
index 4178effd9e99..7b3646adb92f 100644
--- a/tools/power/cpupower/man/cpupower-idle-info.1
+++ b/tools/power/cpupower/man/cpupower-idle-info.1
@@ -87,4 +87,5 @@ Thomas Renninger <trenn@suse.de>
.fi
.SH "SEE ALSO"
.LP
-cpupower(1), cpupower\-monitor(1), cpupower\-info(1), cpupower\-set(1)
+cpupower(1), cpupower\-monitor(1), cpupower\-info(1), cpupower\-set(1),
+cpupower\-idle\-set(1)
diff --git a/tools/power/cpupower/man/cpupower-idle-set.1 b/tools/power/cpupower/man/cpupower-idle-set.1
new file mode 100644
index 000000000000..6b1607272a5b
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower-idle-set.1
@@ -0,0 +1,71 @@
+.TH "CPUPOWER-IDLE-SET" "1" "0.1" "" "cpupower Manual"
+.SH "NAME"
+.LP
+cpupower idle\-set \- Utility to set cpu idle state specific kernel options
+.SH "SYNTAX"
+.LP
+cpupower [ \-c cpulist ] idle\-info [\fIoptions\fP]
+.SH "DESCRIPTION"
+.LP
+The cpupower idle\-set subcommand allows to set cpu idle, also called cpu
+sleep state, specific options offered by the kernel. One example is disabling
+sleep states. This can be handy for power vs performance tuning.
+.SH "OPTIONS"
+.LP
+.TP
+\fB\-d\fR \fB\-\-disable\fR
+Disable a specific processor sleep state.
+.TP
+\fB\-e\fR \fB\-\-enable\fR
+Enable a specific processor sleep state.
+
+.SH "REMARKS"
+.LP
+Cpuidle Governors Policy on Disabling Sleep States
+
+.RS 4
+Depending on the used cpuidle governor, implementing the kernel policy
+how to choose sleep states, subsequent sleep states on this core, might get
+disabled as well.
+
+There are two cpuidle governors ladder and menu. While the ladder
+governor is always available, if CONFIG_CPU_IDLE is selected, the
+menu governor additionally requires CONFIG_NO_HZ.
+
+The behavior and the effect of the disable variable depends on the
+implementation of a particular governor. In the ladder governor, for
+example, it is not coherent, i.e. if one is disabling a light state,
+then all deeper states are disabled as well. Likewise, if one enables a
+deep state but a lighter state still is disabled, then this has no effect.
+.RE
+.LP
+Disabling the Lightest Sleep State may not have any Affect
+
+.RS 4
+If criteria are not met to enter deeper sleep states and the lightest sleep
+state is chosen when idle, the kernel may still enter this sleep state,
+irrespective of whether it is disabled or not. This is also reflected in
+the usage count of the disabled sleep state when using the cpupower idle-info
+command.
+.RE
+.LP
+Selecting specific CPU Cores
+
+.RS 4
+By default processor sleep states of all CPU cores are set. Please refer
+to the cpupower(1) manpage in the \-\-cpu option section how to disable
+C-states of specific cores.
+.RE
+.SH "FILES"
+.nf
+\fI/sys/devices/system/cpu/cpu*/cpuidle/state*\fP
+\fI/sys/devices/system/cpu/cpuidle/*\fP
+.fi
+.SH "AUTHORS"
+.nf
+Thomas Renninger <trenn@suse.de>
+.fi
+.SH "SEE ALSO"
+.LP
+cpupower(1), cpupower\-monitor(1), cpupower\-info(1), cpupower\-set(1),
+cpupower\-idle\-info(1)
diff --git a/tools/power/cpupower/utils/helpers/sysfs.c b/tools/power/cpupower/utils/helpers/sysfs.c
index 5cdc600e8152..851c7a16ca49 100644
--- a/tools/power/cpupower/utils/helpers/sysfs.c
+++ b/tools/power/cpupower/utils/helpers/sysfs.c
@@ -278,7 +278,7 @@ static char *sysfs_idlestate_get_one_string(unsigned int cpu,
int sysfs_is_idlestate_disabled(unsigned int cpu,
unsigned int idlestate)
{
- if (sysfs_get_idlestate_count(cpu) < idlestate)
+ if (sysfs_get_idlestate_count(cpu) <= idlestate)
return -1;
if (!sysfs_idlestate_file_exists(cpu, idlestate,
@@ -303,7 +303,7 @@ int sysfs_idlestate_disable(unsigned int cpu,
char value[SYSFS_PATH_MAX];
int bytes_written;
- if (sysfs_get_idlestate_count(cpu) < idlestate)
+ if (sysfs_get_idlestate_count(cpu) <= idlestate)
return -1;
if (!sysfs_idlestate_file_exists(cpu, idlestate,