diff options
38 files changed, 1921 insertions, 141 deletions
diff --git a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt new file mode 100644 index 000000000000..5c80a7779552 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt @@ -0,0 +1,80 @@ +Device-Tree bindings for regulators of Active-semi ACT8945A Multi-Function Device + +Required properties: + - compatible: "active-semi,act8945a", please refer to ../mfd/act8945a.txt. + +Optional properties: +- active-semi,vsel-high: Indicates if the VSEL pin is set to logic-high. + If this property is missing, assume the VSEL pin is set to logic-low. + +Optional input supply properties: + - vp1-supply: The input supply for REG_DCDC1 + - vp2-supply: The input supply for REG_DCDC2 + - vp3-supply: The input supply for REG_DCDC3 + - inl45-supply: The input supply for REG_LDO1 and REG_LDO2 + - inl67-supply: The input supply for REG_LDO3 and REG_LDO4 + +Any standard regulator properties can be used to configure the single regulator. + +The valid names for regulators are: + REG_DCDC1, REG_DCDC2, REG_DCDC3, REG_LDO1, REG_LDO2, REG_LDO3, REG_LDO4. + +Example: + pmic@5b { + compatible = "active-semi,act8945a"; + reg = <0x5b>; + status = "okay"; + + active-semi,vsel-high; + + regulators { + vdd_1v35_reg: REG_DCDC1 { + regulator-name = "VDD_1V35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + vdd_1v2_reg: REG_DCDC2 { + regulator-name = "VDD_1V2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + vdd_3v3_reg: REG_DCDC3 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_fuse_reg: REG_LDO1 { + regulator-name = "VDD_FUSE"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vdd_3v3_lp_reg: REG_LDO2 { + regulator-name = "VDD_3V3_LP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_led_reg: REG_LDO3 { + regulator-name = "VDD_LED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_sdhc_1v8_reg: REG_LDO4 { + regulator-name = "VDD_SDHC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt b/Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt new file mode 100644 index 000000000000..14cfdc564159 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt @@ -0,0 +1,29 @@ +Hisilicon Hi655x Voltage regulators + +Note: +The Hi655x regulator control is managed by Hi655x PMIC. +So the node of this regulator must be child node of Hi655x +PMIC node. + +The driver uses the regulator core framework, so please also +take the bindings of regulator.txt for reference. + +The valid names for regulators are: + +LDO2_2V8 LDO7_SDIO LDO10_2V85 LDO13_1V8 LDO14_2V8 +LDO15_1V8 LDO17_2V5 LDO19_3V0 LDO21_1V8 LDO22_1V2 + +Example: + pmic: pmic@f8000000 { + compatible = "hisilicon,hi655x-pmic"; + ... + regulators { + ldo2: LDO2@a21 { + regulator-name = "LDO2_2V8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3200000>; + regulator-enable-ramp-delay = <120>; + }; + ... + } + } diff --git a/Documentation/devicetree/bindings/regulator/lp872x.txt b/Documentation/devicetree/bindings/regulator/lp872x.txt index 78183182dad9..ca58a68ffdf1 100644 --- a/Documentation/devicetree/bindings/regulator/lp872x.txt +++ b/Documentation/devicetree/bindings/regulator/lp872x.txt @@ -28,6 +28,7 @@ Optional properties: - ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices. - ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2. - ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH. + - enable-gpios: GPIO specifier for EN pin control of LP872x devices. Sub nodes for regulator_init_data LP8720 has maximum 6 nodes. (child name: ldo1 ~ 5 and buck) diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt index 09d796ed48be..879e98d3b9aa 100644 --- a/Documentation/devicetree/bindings/regulator/max77802.txt +++ b/Documentation/devicetree/bindings/regulator/max77802.txt @@ -60,7 +60,7 @@ The possible values for "regulator-initial-mode" and "regulator-mode" are: 1: Normal regulator voltage output mode. 3: Low Power which reduces the quiescent current down to only 1uA -The list of valid modes are defined in the dt-bindings/clock/maxim,max77802.h +The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h header and can be included by device tree source files. The standard "regulator-mode" property can only be used for regulators that diff --git a/Documentation/devicetree/bindings/regulator/regulator-max77620.txt b/Documentation/devicetree/bindings/regulator/regulator-max77620.txt new file mode 100644 index 000000000000..b3c8ca672024 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/regulator-max77620.txt @@ -0,0 +1,200 @@ +Regulator DT binding for MAX77620 Power management IC from Maxim Semiconductor. + +Device has multiple DCDC(sd[0-3] and LDOs(ldo[0-8]). The input supply +of these regulators are defined under parent device node. +Details of regulator properties are defined as child node under +sub-node "regulators" which is child node of device node. + +Please refer file <Documentation/devicetree/bindings/regulator/regulator.txt> +for common regulator bindings used by client. + +Following are properties of parent node related to regulators. + +Optional properties: +------------------- +The input supply of regulators are the optional properties on the +parent device node. The input supply of these regulators are provided +through following properties: +in-sd0-supply: Input supply for SD0, INA-SD0 or INB-SD0 pins. +in-sd1-supply: Input supply for SD1. +in-sd2-supply: Input supply for SD2. +in-sd3-supply: Input supply for SD3. +in-ldo0-1-supply: Input supply for LDO0 and LDO1. +in-ldo2-supply: Input supply for LDO2. +in-ldo3-5-supply: Input supply for LDO3 and LDO5 +in-ldo4-6-supply: Input supply for LDO4 and LDO6. +in-ldo7-8-supply: Input supply for LDO7 and LDO8. + +Optional sub nodes for regulators under "regulators" subnode: +------------------------------------------------------------ +The subnodes name is the name of regulator and it must be one of: + sd[0-3], ldo[0-8] + +Each sub-node should contain the constraints and initialization +information for that regulator. The definition for each of these +nodes is defined using the standard binding for regulators found at +<Documentation/devicetree/bindings/regulator/regulator.txt>. + +Theres are also additional properties for SD/LDOs. These additional properties +are required to configure FPS configuration parameters for SDs and LDOs. +Please refer <devicetree/bindings/mfd/max77620.txt> for more detail of Flexible +Power Sequence (FPS). +Following are additional properties: + +- maxim,active-fps-source: FPS source for the regulators to get + enabled/disabled when system is in + active state. Valid values are: + - MAX77620_FPS_SRC_0, + FPS source is FPS0. + - MAX77620_FPS_SRC_1, + FPS source is FPS1 + - MAX77620_FPS_SRC_2 and + FPS source is FPS2 + - MAX77620_FPS_SRC_NONE. + Regulator is not controlled + by FPS events and it gets + enabled/disabled by register + access. + Absence of this property will leave + the FPS configuration register for that + regulator to default configuration. + +- maxim,active-fps-power-up-slot: Sequencing event slot number on which + the regulator get enabled when + master FPS input event set to HIGH. + Valid values are 0 to 7. + This is applicable if FPS source is + selected as FPS0, FPS1 or FPS2. + +- maxim,active-fps-power-down-slot: Sequencing event slot number on which + the regulator get disabled when master + FPS input event set to LOW. + Valid values are 0 to 7. + This is applicable if FPS source is + selected as FPS0, FPS1 or FPS2. + +- maxim,suspend-fps-source: This is same as property + "maxim,active-fps-source" but value + get configured when system enters in + to suspend state. + +- maxim,suspend-fps-power-up-slot: This is same as property + "maxim,active-fps-power-up-slot" but + this value get configured into FPS + configuration register when system + enters into suspend. + This is applicable if suspend state + FPS source is selected as FPS0, FPS1 or + +- maxim,suspend-fps-power-down-slot: This is same as property + "maxim,active-fps-power-down-slot" but + this value get configured into FPS + configuration register when system + enters into suspend. + This is applicable if suspend state + FPS source is selected as FPS0, FPS1 or + FPS2. + +Example: +-------- +#include <dt-bindings/mfd/max77620.h> +... +max77620@3c { + in-ldo0-1-supply = <&max77620_sd2>; + in-ldo7-8-supply = <&max77620_sd2>; + regulators { + sd0 { + regulator-name = "vdd-core"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + maxim,active-fps-source = <MAX77620_FPS_SRC_1>; + }; + + sd1 { + regulator-name = "vddio-ddr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + }; + + sd2 { + regulator-name = "vdd-pre-reg"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + }; + + sd3 { + regulator-name = "vdd-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo0 { + regulator-name = "avdd-sys"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1 { + regulator-name = "vdd-pex"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo2 { + regulator-name = "vddio-sdmmc3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo3 { + regulator-name = "vdd-cam-hv"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo4 { + regulator-name = "vdd-rtc"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo5 { + regulator-name = "avdd-ts-hv"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo6 { + regulator-name = "vdd-ts"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo7 { + regulator-name = "vdd-gen-pll-edp"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo8 { + regulator-name = "vdd-hdmi-dp"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 1d112fc456aa..ecfc593cac15 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -44,6 +44,11 @@ Optional properties: any consumer request. - regulator-pull-down: Enable pull down resistor when the regulator is disabled. - regulator-over-current-protection: Enable over current protection. +- regulator-active-discharge: tristate, enable/disable active discharge of + regulators. The values are: + 0: Disable active discharge. + 1: Enable active discharge. + Absence of this property will leave configuration to default. Deprecated properties: - regulator-compatible: If a regulator chip contains multiple diff --git a/Documentation/devicetree/bindings/sound/cs4271.txt b/Documentation/devicetree/bindings/sound/cs4271.txt index e2cd1d7539e5..6e699ceabacd 100644 --- a/Documentation/devicetree/bindings/sound/cs4271.txt +++ b/Documentation/devicetree/bindings/sound/cs4271.txt @@ -33,12 +33,19 @@ Optional properties: Note that this is not needed in case the clocks are stable throughout the entire runtime of the codec. + - vd-supply: Digital power + - vl-supply: Logic power + - va-supply: Analog Power + Examples: codec_i2c: cs4271@10 { compatible = "cirrus,cs4271"; reg = <0x10>; reset-gpio = <&gpio 23 0>; + vd-supply = <&vdd_3v3_reg>; + vl-supply = <&vdd_3v3_reg>; + va-supply = <&vdd_3v3_reg>; }; codec_spi: cs4271@0 { diff --git a/MAINTAINERS b/MAINTAINERS index 57adf395a61f..860e30613c86 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6910,7 +6910,7 @@ MAXIM MAX77802 MULTIFUNCTION PMIC DEVICE DRIVERS M: Javier Martinez Canillas <javier@osg.samsung.com> L: linux-kernel@vger.kernel.org S: Supported -F: drivers/*/*max77802.c +F: drivers/*/*max77802*.c F: Documentation/devicetree/bindings/*/*max77802.txt F: include/dt-bindings/*/*max77802.h @@ -6920,7 +6920,7 @@ M: Krzysztof Kozlowski <k.kozlowski@samsung.com> L: linux-kernel@vger.kernel.org S: Supported F: drivers/*/max14577.c -F: drivers/*/max77686.c +F: drivers/*/max77686*.c F: drivers/*/max77693.c F: drivers/extcon/extcon-max14577.c F: drivers/extcon/extcon-max77693.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 8155e80dd3f8..91040ec8e242 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -78,6 +78,15 @@ config REGULATOR_ACT8865 This driver controls a active-semi act8865 voltage output regulator via I2C bus. +config REGULATOR_ACT8945A + tristate "Active-semi ACT8945A voltage regulator" + depends on MFD_ACT8945A + help + This driver controls a active-semi ACT8945A voltage regulator + via I2C bus. The ACT8945A features three step-down DC/DC converters + and four low-dropout linear regulators, along with a ActivePath + battery charger. + config REGULATOR_AD5398 tristate "Analog Devices AD5398/AD5821 regulators" depends on I2C @@ -261,6 +270,14 @@ config REGULATOR_HI6421 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All of them come with support to either ECO (idle) or sleep mode. +config REGULATOR_HI655X + tristate "Hisilicon HI655X PMIC regulators support" + depends on ARCH_HISI || COMPILE_TEST + depends on MFD_HI655X_PMIC && OF + help + This driver provides support for the voltage regulators of the + Hisilicon Hi655x PMIC device. + config REGULATOR_ISL9305 tristate "Intersil ISL9305 regulator" depends on I2C @@ -343,6 +360,15 @@ config REGULATOR_MAX1586 regulator via I2C bus. The provided regulator is suitable for PXA27x chips to control VCC_CORE and VCC_USIM voltages. +config REGULATOR_MAX77620 + tristate "Maxim 77620/MAX20024 voltage regulator" + depends on MFD_MAX77620 + help + This driver controls Maxim MAX77620 voltage output regulator + via I2C bus. The provided regulator is suitable for Tegra + chip to control Step-Down DC-DC and LDOs. Say Y here to + enable the regulator driver. + config REGULATOR_MAX8649 tristate "Maxim 8649 voltage regulator" depends on I2C diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 980b1943fa81..61bfbb9d4a0c 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o obj-$(CONFIG_REGULATOR_AB8500) += ab8500-ext.o ab8500.o obj-$(CONFIG_REGULATOR_ACT8865) += act8865-regulator.o +obj-$(CONFIG_REGULATOR_ACT8945A) += act8945a-regulator.o obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o @@ -34,6 +35,7 @@ obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o +obj-$(CONFIG_REGULATOR_HI655X) += hi655x-regulator.o obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o obj-$(CONFIG_REGULATOR_LM363X) += lm363x-regulator.o @@ -46,6 +48,7 @@ obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o obj-$(CONFIG_REGULATOR_MAX14577) += max14577.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o +obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o obj-$(CONFIG_REGULATOR_MAX8907) += max8907-regulator.o @@ -54,9 +57,9 @@ obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o obj-$(CONFIG_REGULATOR_MAX8973) += max8973-regulator.o obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o -obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o +obj-$(CONFIG_REGULATOR_MAX77686) += max77686-regulator.o obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o -obj-$(CONFIG_REGULATOR_MAX77802) += max77802.o +obj-$(CONFIG_REGULATOR_MAX77802) += max77802-regulator.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o @@ -98,7 +101,7 @@ obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o obj-$(CONFIG_REGULATOR_TPS80031) += tps80031-regulator.o obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o -obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress.o +obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress-regulator.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c index f8d4cd3d1397..000d566e32a4 100644 --- a/drivers/regulator/act8865-regulator.c +++ b/drivers/regulator/act8865-regulator.c @@ -218,7 +218,7 @@ static const struct regulator_desc act8600_regulators[] = { .ops = &act8865_ldo_ops, .type = REGULATOR_VOLTAGE, .n_voltages = 1, - .fixed_uV = 1800000, + .fixed_uV = 3300000, .enable_reg = ACT8600_LDO910_CTRL, .enable_mask = ACT8865_ENA, .owner = THIS_MODULE, @@ -369,7 +369,7 @@ static int act8865_pdata_from_dt(struct device *dev, for (i = 0; i < num_matches; i++) { regulator->id = i; regulator->name = matches[i].name; - regulator->platform_data = matches[i].init_data; + regulator->init_data = matches[i].init_data; of_node[i] = matches[i].of_node; regulator++; } @@ -396,7 +396,7 @@ static struct regulator_init_data for (i = 0; i < pdata->num_regulators; i++) { if (pdata->regulators[i].id == id) - return pdata->regulators[i].platform_data; + return pdata->regulators[i].init_data; } return NULL; @@ -415,7 +415,7 @@ static void act8865_power_off(void) static int act8865_pmic_probe(struct i2c_client *client, const struct i2c_device_id *i2c_id) { - static const struct regulator_desc *regulators; + const struct regulator_desc *regulators; struct act8865_platform_data pdata_of, *pdata; struct device *dev = &client->dev; struct device_node **of_node; diff --git a/drivers/regulator/act8945a-regulator.c b/drivers/regulator/act8945a-regulator.c new file mode 100644 index 000000000000..441864b9fece --- /dev/null +++ b/drivers/regulator/act8945a-regulator.c @@ -0,0 +1,165 @@ +/* + * Voltage regulation driver for active-semi ACT8945A PMIC + * + * Copyright (C) 2015 Atmel Corporation + * + * Author: Wenyou Yang <wenyou.yang@atmel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> + +/** + * ACT8945A Global Register Map. + */ +#define ACT8945A_SYS_MODE 0x00 +#define ACT8945A_SYS_CTRL 0x01 +#define ACT8945A_DCDC1_VSET1 0x20 +#define ACT8945A_DCDC1_VSET2 0x21 +#define ACT8945A_DCDC1_CTRL 0x22 +#define ACT8945A_DCDC2_VSET1 0x30 +#define ACT8945A_DCDC2_VSET2 0x31 +#define ACT8945A_DCDC2_CTRL 0x32 +#define ACT8945A_DCDC3_VSET1 0x40 +#define ACT8945A_DCDC3_VSET2 0x41 +#define ACT8945A_DCDC3_CTRL 0x42 +#define ACT8945A_LDO1_VSET 0x50 +#define ACT8945A_LDO1_CTRL 0x51 +#define ACT8945A_LDO2_VSET 0x54 +#define ACT8945A_LDO2_CTRL 0x55 +#define ACT8945A_LDO3_VSET 0x60 +#define ACT8945A_LDO3_CTRL 0x61 +#define ACT8945A_LDO4_VSET 0x64 +#define ACT8945A_LDO4_CTRL 0x65 + +/** + * Field Definitions. + */ +#define ACT8945A_ENA 0x80 /* ON - [7] */ +#define ACT8945A_VSEL_MASK 0x3F /* VSET - [5:0] */ + +/** + * ACT8945A Voltage Number + */ +#define ACT8945A_VOLTAGE_NUM 64 + +enum { + ACT8945A_ID_DCDC1, + ACT8945A_ID_DCDC2, + ACT8945A_ID_DCDC3, + ACT8945A_ID_LDO1, + ACT8945A_ID_LDO2, + ACT8945A_ID_LDO3, + ACT8945A_ID_LDO4, + ACT8945A_REG_NUM, +}; + +static const struct regulator_linear_range act8945a_voltage_ranges[] = { + REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000), + REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000), + REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000), +}; + +static struct regulator_ops act8945a_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +#define ACT89xx_REG(_name, _family, _id, _vsel_reg, _supply) \ + [_family##_ID_##_id] = { \ + .name = _name, \ + .supply_name = _supply, \ + .of_match = of_match_ptr("REG_"#_id), \ + .regulators_node = of_match_ptr("regulators"), \ + .id = _family##_ID_##_id, \ + .type = REGULATOR_VOLTAGE, \ + .ops = &act8945a_ops, \ + .n_voltages = ACT8945A_VOLTAGE_NUM, \ + .linear_ranges = act8945a_voltage_ranges, \ + .n_linear_ranges = ARRAY_SIZE(act8945a_voltage_ranges), \ + .vsel_reg = _family##_##_id##_##_vsel_reg, \ + .vsel_mask = ACT8945A_VSEL_MASK, \ + .enable_reg = _family##_##_id##_CTRL, \ + .enable_mask = ACT8945A_ENA, \ + .owner = THIS_MODULE, \ + } + +static const struct regulator_desc act8945a_regulators[] = { + ACT89xx_REG("DCDC_REG1", ACT8945A, DCDC1, VSET1, "vp1"), + ACT89xx_REG("DCDC_REG2", ACT8945A, DCDC2, VSET1, "vp2"), + ACT89xx_REG("DCDC_REG3", ACT8945A, DCDC3, VSET1, "vp3"), + ACT89xx_REG("LDO_REG1", ACT8945A, LDO1, VSET, "inl45"), + ACT89xx_REG("LDO_REG2", ACT8945A, LDO2, VSET, "inl45"), + ACT89xx_REG("LDO_REG3", ACT8945A, LDO3, VSET, "inl67"), + ACT89xx_REG("LDO_REG4", ACT8945A, LDO4, VSET, "inl67"), +}; + +static const struct regulator_desc act8945a_alt_regulators[] = { + ACT89xx_REG("DCDC_REG1", ACT8945A, DCDC1, VSET2, "vp1"), + ACT89xx_REG("DCDC_REG2", ACT8945A, DCDC2, VSET2, "vp2"), + ACT89xx_REG("DCDC_REG3", ACT8945A, DCDC3, VSET2, "vp3"), + ACT89xx_REG("LDO_REG1", ACT8945A, LDO1, VSET, "inl45"), + ACT89xx_REG("LDO_REG2", ACT8945A, LDO2, VSET, "inl45"), + ACT89xx_REG("LDO_REG3", ACT8945A, LDO3, VSET, "inl67"), + ACT89xx_REG("LDO_REG4", ACT8945A, LDO4, VSET, "inl67"), +}; + +static int act8945a_pmic_probe(struct platform_device *pdev) +{ + struct regulator_config config = { }; + const struct regulator_desc *regulators; + struct regulator_dev *rdev; + int i, num_regulators; + bool voltage_select; + + voltage_select = of_property_read_bool(pdev->dev.parent->of_node, + "active-semi,vsel-high"); + + if (voltage_select) { + regulators = act8945a_alt_regulators; + num_regulators = ARRAY_SIZE(act8945a_alt_regulators); + } else { + regulators = act8945a_regulators; + num_regulators = ARRAY_SIZE(act8945a_regulators); + } + + config.dev = &pdev->dev; + config.dev->of_node = pdev->dev.parent->of_node; + for (i = 0; i < num_regulators; i++) { + rdev = devm_regulator_register(&pdev->dev, ®ulators[i], &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, + "failed to register %s regulator\n", + regulators[i].name); + return PTR_ERR(rdev); + } + } + + return 0; +} + +static struct platform_driver act8945a_pmic_driver = { + .driver = { + .name = "act8945a-regulator", + }, + .probe = act8945a_pmic_probe, +}; +module_platform_driver(act8945a_pmic_driver); + +MODULE_DESCRIPTION("Active-semi ACT8945A voltage regulator driver"); +MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/ad5398.c b/drivers/regulator/ad5398.c index ea50a886ba63..8b0f788a9bbb 100644 --- a/drivers/regulator/ad5398.c +++ b/drivers/regulator/ad5398.c @@ -58,10 +58,12 @@ static int ad5398_write_reg(struct i2c_client *client, const unsigned short data val = cpu_to_be16(data); ret = i2c_master_send(client, (char *)&val, 2); - if (ret < 0) + if (ret != 2) { dev_err(&client->dev, "I2C write error\n"); + return ret < 0 ? ret : -EIO; + } - return ret; + return 0; } static int ad5398_get_current_limit(struct regulator_dev *rdev) diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index f2e1a39ce0f3..214e815e98eb 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -39,7 +39,7 @@ #define AXP_DESC_IO(_family, _id, _match, _supply, _min, _max, _step, _vreg, \ _vmask, _ereg, _emask, _enable_val, _disable_val) \ [_family##_##_id] = { \ - .name = #_id, \ + .name = (_match), \ .supply_name = (_supply), \ .of_match = of_match_ptr(_match), \ .regulators_node = of_match_ptr("regulators"), \ @@ -61,7 +61,7 @@ #define AXP_DESC(_family, _id, _match, _supply, _min, _max, _step, _vreg, \ _vmask, _ereg, _emask) \ [_family##_##_id] = { \ - .name = #_id, \ + .name = (_match), \ .supply_name = (_supply), \ .of_match = of_match_ptr(_match), \ .regulators_node = of_match_ptr("regulators"), \ @@ -78,21 +78,15 @@ .ops = &axp20x_ops, \ } -#define AXP_DESC_SW(_family, _id, _match, _supply, _min, _max, _step, _vreg, \ - _vmask, _ereg, _emask) \ +#define AXP_DESC_SW(_family, _id, _match, _supply, _ereg, _emask) \ [_family##_##_id] = { \ - .name = #_id, \ + .name = (_match), \ .supply_name = (_supply), \ .of_match = of_match_ptr(_match), \ .regulators_node = of_match_ptr("regulators"), \ .type = REGULATOR_VOLTAGE, \ .id = _family##_##_id, \ - .n_voltages = (((_max) - (_min)) / (_step) + 1), \ .owner = THIS_MODULE, \ - .min_uV = (_min) * 1000, \ - .uV_step = (_step) * 1000, \ - .vsel_reg = (_vreg), \ - .vsel_mask = (_vmask), \ .enable_reg = (_ereg), \ .enable_mask = (_emask), \ .ops = &axp20x_ops_sw, \ @@ -100,7 +94,7 @@ #define AXP_DESC_FIXED(_family, _id, _match, _supply, _volt) \ [_family##_##_id] = { \ - .name = #_id, \ + .name = (_match), \ .supply_name = (_supply), \ .of_match = of_match_ptr(_match), \ .regulators_node = of_match_ptr("regulators"), \ @@ -112,39 +106,34 @@ .ops = &axp20x_ops_fixed \ } -#define AXP_DESC_TABLE(_family, _id, _match, _supply, _table, _vreg, _vmask, \ - _ereg, _emask) \ +#define AXP_DESC_RANGES(_family, _id, _match, _supply, _ranges, _n_voltages, \ + _vreg, _vmask, _ereg, _emask) \ [_family##_##_id] = { \ - .name = #_id, \ + .name = (_match), \ .supply_name = (_supply), \ .of_match = of_match_ptr(_match), \ .regulators_node = of_match_ptr("regulators"), \ .type = REGULATOR_VOLTAGE, \ .id = _family##_##_id, \ - .n_voltages = ARRAY_SIZE(_table), \ + .n_voltages = (_n_voltages), \ .owner = THIS_MODULE, \ .vsel_reg = (_vreg), \ .vsel_mask = (_vmask), \ .enable_reg = (_ereg), \ .enable_mask = (_emask), \ - .volt_table = (_table), \ - .ops = &axp20x_ops_table, \ + .linear_ranges = (_ranges), \ + .n_linear_ranges = ARRAY_SIZE(_ranges), \ + .ops = &axp20x_ops_range, \ } -static const int axp20x_ldo4_data[] = { 1250000, 1300000, 1400000, 1500000, 1600000, - 1700000, 1800000, 1900000, 2000000, 2500000, - 2700000, 2800000, 3000000, 3100000, 3200000, - 3300000 }; - static struct regulator_ops axp20x_ops_fixed = { .list_voltage = regulator_list_voltage_linear, }; -static struct regulator_ops axp20x_ops_table = { +static struct regulator_ops axp20x_ops_range = { .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, - .list_voltage = regulator_list_voltage_table, - .map_voltage = regulator_map_voltage_ascend, + .list_voltage = regulator_list_voltage_linear_range, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, @@ -160,13 +149,17 @@ static struct regulator_ops axp20x_ops = { }; static struct regulator_ops axp20x_ops_sw = { - .get_voltage_sel = regulator_get_voltage_sel_regmap, - .list_voltage = regulator_list_voltage_linear, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, }; +static const struct regulator_linear_range axp20x_ldo4_ranges[] = { + REGULATOR_LINEAR_RANGE(1250000, 0x0, 0x0, 0), + REGULATOR_LINEAR_RANGE(1300000, 0x1, 0x8, 100000), + REGULATOR_LINEAR_RANGE(2500000, 0x9, 0xf, 100000), +}; + static const struct regulator_desc axp20x_regulators[] = { AXP_DESC(AXP20X, DCDC2, "dcdc2", "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT, 0x3f, AXP20X_PWR_OUT_CTRL, 0x10), @@ -177,8 +170,9 @@ static const struct regulator_desc axp20x_regulators[] = { AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04), AXP_DESC(AXP20X, LDO3, "ldo3", "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT, 0x7f, AXP20X_PWR_OUT_CTRL, 0x40), - AXP_DESC_TABLE(AXP20X, LDO4, "ldo4", "ldo24in", axp20x_ldo4_data, - AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, 0x08), + AXP_DESC_RANGES(AXP20X, LDO4, "ldo4", "ldo24in", axp20x_ldo4_ranges, + 16, AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, + 0x08), AXP_DESC_IO(AXP20X, LDO5, "ldo5", "ldo5in", 1800, 3300, 100, AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07, AXP20X_IO_ENABLED, AXP20X_IO_DISABLED), @@ -196,8 +190,8 @@ static const struct regulator_desc axp22x_regulators[] = { AXP_DESC(AXP22X, DCDC5, "dcdc5", "vin5", 1000, 2550, 50, AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(5)), /* secondary switchable output of DCDC1 */ - AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", NULL, 1600, 3400, 100, - AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(7)), + AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", NULL, AXP22X_PWR_OUT_CTRL2, + BIT(7)), /* LDO regulator internally chained to DCDC5 */ AXP_DESC(AXP22X, DC5LDO, "dc5ldo", NULL, 700, 1400, 100, AXP22X_DC5LDO_V_OUT, 0x7, AXP22X_PWR_OUT_CTRL1, BIT(0)), diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 744c9889f88d..e0b764284773 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1057,18 +1057,18 @@ static int set_machine_constraints(struct regulator_dev *rdev, ret = machine_constraints_voltage(rdev, rdev->constraints); if (ret != 0) - goto out; + return ret; ret = machine_constraints_current(rdev, rdev->constraints); if (ret != 0) - goto out; + return ret; if (rdev->constraints->ilim_uA && ops->set_input_current_limit) { ret = ops->set_input_current_limit(rdev, rdev->constraints->ilim_uA); if (ret < 0) { rdev_err(rdev, "failed to set input limit\n"); - goto out; + return ret; } } @@ -1077,21 +1077,20 @@ static int set_machine_constraints(struct regulator_dev *rdev, ret = suspend_prepare(rdev, rdev->constraints->initial_state); if (ret < 0) { rdev_err(rdev, "failed to set suspend state\n"); - goto out; + return ret; } } if (rdev->constraints->initial_mode) { if (!ops->set_mode) { rdev_err(rdev, "no set_mode operation\n"); - ret = -EINVAL; - goto out; + return -EINVAL; } ret = ops->set_mode(rdev, rdev->constraints->initial_mode); if (ret < 0) { rdev_err(rdev, "failed to set initial mode: %d\n", ret); - goto out; + return ret; } } @@ -1102,7 +1101,7 @@ static int set_machine_constraints(struct regulator_dev *rdev, ret = _regulator_do_enable(rdev); if (ret < 0 && ret != -EINVAL) { rdev_err(rdev, "failed to enable\n"); - goto out; + return ret; } } @@ -1111,7 +1110,7 @@ static int set_machine_constraints(struct regulator_dev *rdev, ret = ops->set_ramp_delay(rdev, rdev->constraints->ramp_delay); if (ret < 0) { rdev_err(rdev, "failed to set ramp_delay\n"); - goto out; + return ret; } } @@ -1119,7 +1118,7 @@ static int set_machine_constraints(struct regulator_dev *rdev, ret = ops->set_pull_down(rdev); if (ret < 0) { rdev_err(rdev, "failed to set pull down\n"); - goto out; + return ret; } } @@ -1127,7 +1126,7 @@ static int set_machine_constraints(struct regulator_dev *rdev, ret = ops->set_soft_start(rdev); if (ret < 0) { rdev_err(rdev, "failed to set soft start\n"); - goto out; + return ret; } } @@ -1136,16 +1135,34 @@ static int set_machine_constraints(struct regulator_dev *rdev, ret = ops->set_over_current_protection(rdev); if (ret < 0) { rdev_err(rdev, "failed to set over current protection\n"); - goto out; + return ret; + } + } + + if (rdev->constraints->active_discharge && ops->set_active_discharge) { + bool ad_state = (rdev->constraints->active_discharge == + REGULATOR_ACTIVE_DISCHARGE_ENABLE) ? true : false; + + ret = ops->set_active_discharge(rdev, ad_state); + if (ret < 0) { + rdev_err(rdev, "failed to set active discharge\n"); + return ret; + } + } + + if (rdev->constraints->active_discharge && ops->set_active_discharge) { + bool ad_state = (rdev->constraints->active_discharge == + REGULATOR_ACTIVE_DISCHARGE_ENABLE) ? true : false; + + ret = ops->set_active_discharge(rdev, ad_state); + if (ret < 0) { + rdev_err(rdev, "failed to set active discharge\n"); + return ret; } } print_constraints(rdev); return 0; -out: - kfree(rdev->constraints); - rdev->constraints = NULL; - return ret; } /** @@ -3918,6 +3935,16 @@ regulator_register(const struct regulator_desc *regulator_desc, goto clean; } + if ((config->ena_gpio || config->ena_gpio_initialized) && + gpio_is_valid(config->ena_gpio)) { + ret = regulator_ena_gpio_request(rdev, config); + if (ret != 0) { + rdev_err(rdev, "Failed to request enable GPIO%d: %d\n", + config->ena_gpio, ret); + goto clean; + } + } + /* register with sysfs */ rdev->dev.class = ®ulator_class; rdev->dev.parent = dev; @@ -3926,21 +3953,11 @@ regulator_register(const struct regulator_desc *regulator_desc, ret = device_register(&rdev->dev); if (ret != 0) { put_device(&rdev->dev); - goto clean; + goto wash; } dev_set_drvdata(&rdev->dev, rdev); - if ((config->ena_gpio || config->ena_gpio_initialized) && - gpio_is_valid(config->ena_gpio)) { - ret = regulator_ena_gpio_request(rdev, config); - if (ret != 0) { - rdev_err(rdev, "Failed to request enable GPIO%d: %d\n", - config->ena_gpio, ret); - goto wash; - } - } - /* set regulator constraints */ if (init_data) constraints = &init_data->constraints; @@ -3979,13 +3996,13 @@ unset_supplies: scrub: regulator_ena_gpio_free(rdev); - kfree(rdev->constraints); -wash: device_unregister(&rdev->dev); /* device core frees rdev */ rdev = ERR_PTR(ret); goto out; +wash: + regulator_ena_gpio_free(rdev); clean: kfree(rdev); rdev = ERR_PTR(ret); diff --git a/drivers/regulator/da9210-regulator.c b/drivers/regulator/da9210-regulator.c index 8b3cc9f0cd64..01c0e3709b66 100644 --- a/drivers/regulator/da9210-regulator.c +++ b/drivers/regulator/da9210-regulator.c @@ -132,6 +132,8 @@ static irqreturn_t da9210_irq_handler(int irq, void *data) if (error < 0) goto error_i2c; + mutex_lock(&chip->rdev->mutex); + if (val & DA9210_E_OVCURR) { regulator_notifier_call_chain(chip->rdev, REGULATOR_EVENT_OVER_CURRENT, @@ -155,6 +157,9 @@ static irqreturn_t da9210_irq_handler(int irq, void *data) NULL); handled |= DA9210_E_VMAX; } + + mutex_unlock(&chip->rdev->mutex); + if (handled) { /* Clear handled events */ error = regmap_write(chip->regmap, DA9210_REG_EVENT_B, handled); diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c index 4940e8287df6..2cb5cc311610 100644 --- a/drivers/regulator/fan53555.c +++ b/drivers/regulator/fan53555.c @@ -114,6 +114,22 @@ static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV) return 0; } +static int fan53555_set_suspend_enable(struct regulator_dev *rdev) +{ + struct fan53555_device_info *di = rdev_get_drvdata(rdev); + + return regmap_update_bits(di->regmap, di->sleep_reg, + VSEL_BUCK_EN, VSEL_BUCK_EN); +} + +static int fan53555_set_suspend_disable(struct regulator_dev *rdev) +{ + struct fan53555_device_info *di = rdev_get_drvdata(rdev); + + return regmap_update_bits(di->regmap, di->sleep_reg, + VSEL_BUCK_EN, 0); +} + static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode) { struct fan53555_device_info *di = rdev_get_drvdata(rdev); @@ -192,6 +208,8 @@ static struct regulator_ops fan53555_regulator_ops = { .set_mode = fan53555_set_mode, .get_mode = fan53555_get_mode, .set_ramp_delay = fan53555_set_ramp, + .set_suspend_enable = fan53555_set_suspend_enable, + .set_suspend_disable = fan53555_set_suspend_disable, }; static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di) diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c index 7bba8b747f30..a8718e98674a 100644 --- a/drivers/regulator/gpio-regulator.c +++ b/drivers/regulator/gpio-regulator.c @@ -283,8 +283,10 @@ static int gpio_regulator_probe(struct platform_device *pdev) drvdata->nr_gpios = config->nr_gpios; ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios); if (ret) { - dev_err(&pdev->dev, - "Could not obtain regulator setting GPIOs: %d\n", ret); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "Could not obtain regulator setting GPIOs: %d\n", + ret); goto err_memstate; } } diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c index 3bbb32680a94..b1e32e7482e9 100644 --- a/drivers/regulator/helpers.c +++ b/drivers/regulator/helpers.c @@ -465,3 +465,26 @@ int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable) return 0; } EXPORT_SYMBOL_GPL(regulator_get_bypass_regmap); + +/** + * regulator_set_active_discharge_regmap - Default set_active_discharge() + * using regmap + * + * @rdev: device to operate on. + * @enable: state to set, 0 to disable and 1 to enable. + */ +int regulator_set_active_discharge_regmap(struct regulator_dev *rdev, + bool enable) +{ + unsigned int val; + + if (enable) + val = rdev->desc->active_discharge_on; + else + val = rdev->desc->active_discharge_off; + + return regmap_update_bits(rdev->regmap, + rdev->desc->active_discharge_reg, + rdev->desc->active_discharge_mask, val); +} +EXPORT_SYMBOL_GPL(regulator_set_active_discharge_regmap); diff --git a/drivers/regulator/hi655x-regulator.c b/drivers/regulator/hi655x-regulator.c new file mode 100644 index 000000000000..aca18466f522 --- /dev/null +++ b/drivers/regulator/hi655x-regulator.c @@ -0,0 +1,227 @@ +/* + * Device driver for regulators in Hi655x IC + * + * Copyright (c) 2016 Hisilicon. + * + * Authors: + * Chen Feng <puck.chen@hisilicon.com> + * Fei Wang <w.f@huawei.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> +#include <linux/mfd/hi655x-pmic.h> + +struct hi655x_regulator { + unsigned int disable_reg; + unsigned int status_reg; + unsigned int ctrl_regs; + unsigned int ctrl_mask; + struct regulator_desc rdesc; +}; + +/* LDO7 & LDO10 */ +static const unsigned int ldo7_voltages[] = { + 1800000, 1850000, 2850000, 2900000, + 3000000, 3100000, 3200000, 3300000, +}; + +static const unsigned int ldo19_voltages[] = { + 1800000, 1850000, 1900000, 1750000, + 2800000, 2850000, 2900000, 3000000, +}; + +static const unsigned int ldo22_voltages[] = { + 900000, 1000000, 1050000, 1100000, + 1150000, 1175000, 1185000, 1200000, +}; + +enum hi655x_regulator_id { + HI655X_LDO0, + HI655X_LDO1, + HI655X_LDO2, + HI655X_LDO3, + HI655X_LDO4, + HI655X_LDO5, + HI655X_LDO6, + HI655X_LDO7, + HI655X_LDO8, + HI655X_LDO9, + HI655X_LDO10, + HI655X_LDO11, + HI655X_LDO12, + HI655X_LDO13, + HI655X_LDO14, + HI655X_LDO15, + HI655X_LDO16, + HI655X_LDO17, + HI655X_LDO18, + HI655X_LDO19, + HI655X_LDO20, + HI655X_LDO21, + HI655X_LDO22, +}; + +static int hi655x_is_enabled(struct regulator_dev *rdev) +{ + unsigned int value = 0; + + struct hi655x_regulator *regulator = rdev_get_drvdata(rdev); + + regmap_read(rdev->regmap, regulator->status_reg, &value); + return (value & BIT(regulator->ctrl_mask)); +} + +static int hi655x_disable(struct regulator_dev *rdev) +{ + int ret = 0; + + struct hi655x_regulator *regulator = rdev_get_drvdata(rdev); + + ret = regmap_write(rdev->regmap, regulator->disable_reg, + BIT(regulator->ctrl_mask)); + return ret; +} + +static struct regulator_ops hi655x_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = hi655x_disable, + .is_enabled = hi655x_is_enabled, + .list_voltage = regulator_list_voltage_table, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, +}; + +static struct regulator_ops hi655x_ldo_linear_ops = { + .enable = regulator_enable_regmap, + .disable = hi655x_disable, + .is_enabled = hi655x_is_enabled, + .list_voltage = regulator_list_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, +}; + +#define HI655X_LDO(_ID, vreg, vmask, ereg, dreg, \ + sreg, cmask, vtable) { \ + .rdesc = { \ + .name = #_ID, \ + .of_match = of_match_ptr(#_ID), \ + .ops = &hi655x_regulator_ops, \ + .regulators_node = of_match_ptr("regulators"), \ + .type = REGULATOR_VOLTAGE, \ + .id = HI655X_##_ID, \ + .owner = THIS_MODULE, \ + .n_voltages = ARRAY_SIZE(vtable), \ + .volt_table = vtable, \ + .vsel_reg = HI655X_BUS_ADDR(vreg), \ + .vsel_mask = vmask, \ + .enable_reg = HI655X_BUS_ADDR(ereg), \ + .enable_mask = BIT(cmask), \ + }, \ + .disable_reg = HI655X_BUS_ADDR(dreg), \ + .status_reg = HI655X_BUS_ADDR(sreg), \ + .ctrl_mask = cmask, \ +} + +#define HI655X_LDO_LINEAR(_ID, vreg, vmask, ereg, dreg, \ + sreg, cmask, minv, nvolt, vstep) { \ + .rdesc = { \ + .name = #_ID, \ + .of_match = of_match_ptr(#_ID), \ + .ops = &hi655x_ldo_linear_ops, \ + .regulators_node = of_match_ptr("regulators"), \ + .type = REGULATOR_VOLTAGE, \ + .id = HI655X_##_ID, \ + .owner = THIS_MODULE, \ + .min_uV = minv, \ + .n_voltages = nvolt, \ + .uV_step = vstep, \ + .vsel_reg = HI655X_BUS_ADDR(vreg), \ + .vsel_mask = vmask, \ + .enable_reg = HI655X_BUS_ADDR(ereg), \ + .enable_mask = BIT(cmask), \ + }, \ + .disable_reg = HI655X_BUS_ADDR(dreg), \ + .status_reg = HI655X_BUS_ADDR(sreg), \ + .ctrl_mask = cmask, \ +} + +static struct hi655x_regulator regulators[] = { + HI655X_LDO_LINEAR(LDO2, 0x72, 0x07, 0x29, 0x2a, 0x2b, 0x01, + 2500000, 8, 100000), + HI655X_LDO(LDO7, 0x78, 0x07, 0x29, 0x2a, 0x2b, 0x06, ldo7_voltages), + HI655X_LDO(LDO10, 0x78, 0x07, 0x29, 0x2a, 0x2b, 0x01, ldo7_voltages), + HI655X_LDO_LINEAR(LDO13, 0x7e, 0x07, 0x2c, 0x2d, 0x2e, 0x04, + 1600000, 8, 50000), + HI655X_LDO_LINEAR(LDO14, 0x7f, 0x07, 0x2c, 0x2d, 0x2e, 0x05, + 2500000, 8, 100000), + HI655X_LDO_LINEAR(LDO15, 0x80, 0x07, 0x2c, 0x2d, 0x2e, 0x06, + 1600000, 8, 50000), + HI655X_LDO_LINEAR(LDO17, 0x82, 0x07, 0x2f, 0x30, 0x31, 0x00, + 2500000, 8, 100000), + HI655X_LDO(LDO19, 0x84, 0x07, 0x2f, 0x30, 0x31, 0x02, ldo19_voltages), + HI655X_LDO_LINEAR(LDO21, 0x86, 0x07, 0x2f, 0x30, 0x31, 0x04, + 1650000, 8, 50000), + HI655X_LDO(LDO22, 0x87, 0x07, 0x2f, 0x30, 0x31, 0x05, ldo22_voltages), +}; + +static int hi655x_regulator_probe(struct platform_device *pdev) +{ + unsigned int i; + struct hi655x_regulator *regulator; + struct hi655x_pmic *pmic; + struct regulator_config config = { }; + struct regulator_dev *rdev; + + pmic = dev_get_drvdata(pdev->dev.parent); + if (!pmic) { + dev_err(&pdev->dev, "no pmic in the regulator parent node\n"); + return -ENODEV; + } + + regulator = devm_kzalloc(&pdev->dev, sizeof(*regulator), GFP_KERNEL); + if (!regulator) + return -ENOMEM; + + platform_set_drvdata(pdev, regulator); + + config.dev = pdev->dev.parent; + config.regmap = pmic->regmap; + config.driver_data = regulator; + for (i = 0; i < ARRAY_SIZE(regulators); i++) { + rdev = devm_regulator_register(&pdev->dev, + ®ulators[i].rdesc, + &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + regulator->rdesc.name); + return PTR_ERR(rdev); + } + } + return 0; +} + +static struct platform_driver hi655x_regulator_driver = { + .driver = { + .name = "hi655x-regulator", + }, + .probe = hi655x_regulator_probe, +}; +module_platform_driver(hi655x_regulator_driver); + +MODULE_AUTHOR("Chen Feng <puck.chen@hisilicon.com>"); +MODULE_DESCRIPTION("Hisilicon Hi655x regulator driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c index 19d758486553..38992112fd6e 100644 --- a/drivers/regulator/lp872x.c +++ b/drivers/regulator/lp872x.c @@ -15,6 +15,7 @@ #include <linux/regmap.h> #include <linux/err.h> #include <linux/gpio.h> +#include <linux/delay.h> #include <linux/regulator/lp872x.h> #include <linux/regulator/driver.h> #include <linux/platform_device.h> @@ -738,10 +739,8 @@ static int lp872x_init_dvs(struct lp872x *lp) goto set_default_dvs_mode; gpio = dvs->gpio; - if (!gpio_is_valid(gpio)) { - dev_warn(lp->dev, "invalid gpio: %d\n", gpio); + if (!gpio_is_valid(gpio)) goto set_default_dvs_mode; - } pinstate = dvs->init_state; ret = devm_gpio_request_one(lp->dev, gpio, pinstate, "LP872X DVS"); @@ -759,6 +758,33 @@ set_default_dvs_mode: default_dvs_mode[lp->chipid]); } +static int lp872x_hw_enable(struct lp872x *lp) +{ + int ret, gpio; + + if (!lp->pdata) + return -EINVAL; + + gpio = lp->pdata->enable_gpio; + if (!gpio_is_valid(gpio)) + return 0; + + /* Always set enable GPIO high. */ + ret = devm_gpio_request_one(lp->dev, gpio, GPIOF_OUT_INIT_HIGH, "LP872X EN"); + if (ret) { + dev_err(lp->dev, "gpio request err: %d\n", ret); + return ret; + } + + /* Each chip has a different enable delay. */ + if (lp->chipid == LP8720) + usleep_range(LP8720_ENABLE_DELAY, 1.5 * LP8720_ENABLE_DELAY); + else + usleep_range(LP8725_ENABLE_DELAY, 1.5 * LP8725_ENABLE_DELAY); + + return 0; +} + static int lp872x_config(struct lp872x *lp) { struct lp872x_platform_data *pdata = lp->pdata; @@ -877,6 +903,8 @@ static struct lp872x_platform_data of_property_read_u8(np, "ti,dvs-state", &dvs_state); pdata->dvs->init_state = dvs_state ? DVS_HIGH : DVS_LOW; + pdata->enable_gpio = of_get_named_gpio(np, "enable-gpios", 0); + if (of_get_child_count(np) == 0) goto out; @@ -950,6 +978,10 @@ static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id) lp->chipid = id->driver_data; i2c_set_clientdata(cl, lp); + ret = lp872x_hw_enable(lp); + if (ret) + return ret; + ret = lp872x_config(lp); if (ret) return ret; diff --git a/drivers/regulator/ltc3589.c b/drivers/regulator/ltc3589.c index 972c386b2690..47bef328fb58 100644 --- a/drivers/regulator/ltc3589.c +++ b/drivers/regulator/ltc3589.c @@ -520,12 +520,15 @@ static int ltc3589_probe(struct i2c_client *client, } } - ret = devm_request_threaded_irq(dev, client->irq, NULL, ltc3589_isr, - IRQF_TRIGGER_LOW | IRQF_ONESHOT, - client->name, ltc3589); - if (ret) { - dev_err(dev, "Failed to request IRQ: %d\n", ret); - return ret; + if (client->irq) { + ret = devm_request_threaded_irq(dev, client->irq, NULL, + ltc3589_isr, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + client->name, ltc3589); + if (ret) { + dev_err(dev, "Failed to request IRQ: %d\n", ret); + return ret; + } } return 0; diff --git a/drivers/regulator/max77620-regulator.c b/drivers/regulator/max77620-regulator.c new file mode 100644 index 000000000000..73a3356a5c19 --- /dev/null +++ b/drivers/regulator/max77620-regulator.c @@ -0,0 +1,813 @@ +/* + * Maxim MAX77620 Regulator driver + * + * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved. + * + * Author: Mallikarjun Kasoju <mkasoju@nvidia.com> + * Laxman Dewangan <ldewangan@nvidia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/mfd/max77620.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> + +#define max77620_rails(_name) "max77620-"#_name + +/* Power Mode */ +#define MAX77620_POWER_MODE_NORMAL 3 +#define MAX77620_POWER_MODE_LPM 2 +#define MAX77620_POWER_MODE_GLPM 1 +#define MAX77620_POWER_MODE_DISABLE 0 + +/* SD Slew Rate */ +#define MAX77620_SD_SR_13_75 0 +#define MAX77620_SD_SR_27_5 1 +#define MAX77620_SD_SR_55 2 +#define MAX77620_SD_SR_100 3 + +enum max77620_regulators { + MAX77620_REGULATOR_ID_SD0, + MAX77620_REGULATOR_ID_SD1, + MAX77620_REGULATOR_ID_SD2, + MAX77620_REGULATOR_ID_SD3, + MAX77620_REGULATOR_ID_SD4, + MAX77620_REGULATOR_ID_LDO0, + MAX77620_REGULATOR_ID_LDO1, + MAX77620_REGULATOR_ID_LDO2, + MAX77620_REGULATOR_ID_LDO3, + MAX77620_REGULATOR_ID_LDO4, + MAX77620_REGULATOR_ID_LDO5, + MAX77620_REGULATOR_ID_LDO6, + MAX77620_REGULATOR_ID_LDO7, + MAX77620_REGULATOR_ID_LDO8, + MAX77620_NUM_REGS, +}; + +/* Regulator types */ +enum max77620_regulator_type { + MAX77620_REGULATOR_TYPE_SD, + MAX77620_REGULATOR_TYPE_LDO_N, + MAX77620_REGULATOR_TYPE_LDO_P, +}; + +struct max77620_regulator_info { + u8 type; + u8 fps_addr; + u8 volt_addr; + u8 cfg_addr; + u8 power_mode_mask; + u8 power_mode_shift; + u8 remote_sense_addr; + u8 remote_sense_mask; + struct regulator_desc desc; +}; + +struct max77620_regulator_pdata { + struct regulator_init_data *reg_idata; + int active_fps_src; + int active_fps_pd_slot; + int active_fps_pu_slot; + int suspend_fps_src; + int suspend_fps_pd_slot; + int suspend_fps_pu_slot; + int current_mode; +}; + +struct max77620_regulator { + struct device *dev; + struct regmap *rmap; + struct max77620_regulator_info *rinfo[MAX77620_NUM_REGS]; + struct max77620_regulator_pdata reg_pdata[MAX77620_NUM_REGS]; + int enable_power_mode[MAX77620_NUM_REGS]; + int current_power_mode[MAX77620_NUM_REGS]; + int active_fps_src[MAX77620_NUM_REGS]; +}; + +#define fps_src_name(fps_src) \ + (fps_src == MAX77620_FPS_SRC_0 ? "FPS_SRC_0" : \ + fps_src == MAX77620_FPS_SRC_1 ? "FPS_SRC_1" : \ + fps_src == MAX77620_FPS_SRC_2 ? "FPS_SRC_2" : "FPS_SRC_NONE") + +static int max77620_regulator_get_fps_src(struct max77620_regulator *pmic, + int id) +{ + struct max77620_regulator_info *rinfo = pmic->rinfo[id]; + unsigned int val; + int ret; + + ret = regmap_read(pmic->rmap, rinfo->fps_addr, &val); + if (ret < 0) { + dev_err(pmic->dev, "Reg 0x%02x read failed %d\n", + rinfo->fps_addr, ret); + return ret; + } + + return (val & MAX77620_FPS_SRC_MASK) >> MAX77620_FPS_SRC_SHIFT; +} + +static int max77620_regulator_set_fps_src(struct max77620_regulator *pmic, + int fps_src, int id) +{ + struct max77620_regulator_info *rinfo = pmic->rinfo[id]; + unsigned int val; + int ret; + + switch (fps_src) { + case MAX77620_FPS_SRC_0: + case MAX77620_FPS_SRC_1: + case MAX77620_FPS_SRC_2: + case MAX77620_FPS_SRC_NONE: + break; + + case MAX77620_FPS_SRC_DEF: + ret = regmap_read(pmic->rmap, rinfo->fps_addr, &val); + if (ret < 0) { + dev_err(pmic->dev, "Reg 0x%02x read failed %d\n", + rinfo->fps_addr, ret); + return ret; + } + ret = (val & MAX77620_FPS_SRC_MASK) >> MAX77620_FPS_SRC_SHIFT; + pmic->active_fps_src[id] = ret; + return 0; + + default: + dev_err(pmic->dev, "Invalid FPS %d for regulator %d\n", + fps_src, id); + return -EINVAL; + } + + ret = regmap_update_bits(pmic->rmap, rinfo->fps_addr, + MAX77620_FPS_SRC_MASK, + fps_src << MAX77620_FPS_SRC_SHIFT); + if (ret < 0) { + dev_err(pmic->dev, "Reg 0x%02x update failed %d\n", + rinfo->fps_addr, ret); + return ret; + } + pmic->active_fps_src[id] = fps_src; + + return 0; +} + +static int max77620_regulator_set_fps_slots(struct max77620_regulator *pmic, + int id, bool is_suspend) +{ + struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[id]; + struct max77620_regulator_info *rinfo = pmic->rinfo[id]; + unsigned int val = 0; + unsigned int mask = 0; + int pu = rpdata->active_fps_pu_slot; + int pd = rpdata->active_fps_pd_slot; + int ret = 0; + + if (is_suspend) { + pu = rpdata->suspend_fps_pu_slot; + pd = rpdata->suspend_fps_pd_slot; + } + + /* FPS power up period setting */ + if (pu >= 0) { + val |= (pu << MAX77620_FPS_PU_PERIOD_SHIFT); + mask |= MAX77620_FPS_PU_PERIOD_MASK; + } + + /* FPS power down period setting */ + if (pd >= 0) { + val |= (pd << MAX77620_FPS_PD_PERIOD_SHIFT); + mask |= MAX77620_FPS_PD_PERIOD_MASK; + } + + if (mask) { + ret = regmap_update_bits(pmic->rmap, rinfo->fps_addr, + mask, val); + if (ret < 0) { + dev_err(pmic->dev, "Reg 0x%02x update failed: %d\n", + rinfo->fps_addr, ret); + return ret; + } + } + + return ret; +} + +static int max77620_regulator_set_power_mode(struct max77620_regulator *pmic, + int power_mode, int id) +{ + struct max77620_regulator_info *rinfo = pmic->rinfo[id]; + u8 mask = rinfo->power_mode_mask; + u8 shift = rinfo->power_mode_shift; + u8 addr; + int ret; + + switch (rinfo->type) { + case MAX77620_REGULATOR_TYPE_SD: + addr = rinfo->cfg_addr; + break; + default: + addr = rinfo->volt_addr; + break; + } + + ret = regmap_update_bits(pmic->rmap, addr, mask, power_mode << shift); + if (ret < 0) { + dev_err(pmic->dev, "Regulator %d mode set failed: %d\n", + id, ret); + return ret; + } + pmic->current_power_mode[id] = power_mode; + + return ret; +} + +static int max77620_regulator_get_power_mode(struct max77620_regulator *pmic, + int id) +{ + struct max77620_regulator_info *rinfo = pmic->rinfo[id]; + unsigned int val, addr; + u8 mask = rinfo->power_mode_mask; + u8 shift = rinfo->power_mode_shift; + int ret; + + switch (rinfo->type) { + case MAX77620_REGULATOR_TYPE_SD: + addr = rinfo->cfg_addr; + break; + default: + addr = rinfo->volt_addr; + break; + } + + ret = regmap_read(pmic->rmap, addr, &val); + if (ret < 0) { + dev_err(pmic->dev, "Regulator %d: Reg 0x%02x read failed: %d\n", + id, addr, ret); + return ret; + } + + return (val & mask) >> shift; +} + +static int max77620_read_slew_rate(struct max77620_regulator *pmic, int id) +{ + struct max77620_regulator_info *rinfo = pmic->rinfo[id]; + unsigned int rval; + int slew_rate; + int ret; + + ret = regmap_read(pmic->rmap, rinfo->cfg_addr, &rval); + if (ret < 0) { + dev_err(pmic->dev, "Register 0x%02x read failed: %d\n", + rinfo->cfg_addr, ret); + return ret; + } + + switch (rinfo->type) { + case MAX77620_REGULATOR_TYPE_SD: + slew_rate = (rval >> MAX77620_SD_SR_SHIFT) & 0x3; + switch (slew_rate) { + case 0: + slew_rate = 13750; + break; + case 1: + slew_rate = 27500; + break; + case 2: + slew_rate = 55000; + break; + case 3: + slew_rate = 100000; + break; + } + rinfo->desc.ramp_delay = slew_rate; + break; + default: + slew_rate = rval & 0x1; + switch (slew_rate) { + case 0: + slew_rate = 100000; + break; + case 1: + slew_rate = 5000; + break; + } + rinfo->desc.ramp_delay = slew_rate; + break; + } + + return 0; +} + +static int max77620_init_pmic(struct max77620_regulator *pmic, int id) +{ + struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[id]; + int ret; + + /* Update power mode */ + ret = max77620_regulator_get_power_mode(pmic, id); + if (ret < 0) + return ret; + + pmic->current_power_mode[id] = ret; + pmic->enable_power_mode[id] = MAX77620_POWER_MODE_NORMAL; + + if (rpdata->active_fps_src == MAX77620_FPS_SRC_DEF) { + ret = max77620_regulator_get_fps_src(pmic, id); + if (ret < 0) + return ret; + rpdata->active_fps_src = ret; + } + + /* If rails are externally control of FPS then enable it always. */ + if (rpdata->active_fps_src == MAX77620_FPS_SRC_NONE) { + ret = max77620_regulator_set_power_mode(pmic, + pmic->enable_power_mode[id], id); + if (ret < 0) + return ret; + } else { + if (pmic->current_power_mode[id] != + pmic->enable_power_mode[id]) { + ret = max77620_regulator_set_power_mode(pmic, + pmic->enable_power_mode[id], id); + if (ret < 0) + return ret; + } + } + + ret = max77620_regulator_set_fps_src(pmic, rpdata->active_fps_src, id); + if (ret < 0) + return ret; + + ret = max77620_regulator_set_fps_slots(pmic, id, false); + if (ret < 0) + return ret; + + return 0; +} + +static int max77620_regulator_enable(struct regulator_dev *rdev) +{ + struct max77620_regulator *pmic = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + + if (pmic->active_fps_src[id] != MAX77620_FPS_SRC_NONE) + return 0; + + return max77620_regulator_set_power_mode(pmic, + pmic->enable_power_mode[id], id); +} + +static int max77620_regulator_disable(struct regulator_dev *rdev) +{ + struct max77620_regulator *pmic = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + + if (pmic->active_fps_src[id] != MAX77620_FPS_SRC_NONE) + return 0; + + return max77620_regulator_set_power_mode(pmic, + MAX77620_POWER_MODE_DISABLE, id); +} + +static int max77620_regulator_is_enabled(struct regulator_dev *rdev) +{ + struct max77620_regulator *pmic = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + int ret = 1; + + if (pmic->active_fps_src[id] != MAX77620_FPS_SRC_NONE) + return 1; + + ret = max77620_regulator_get_power_mode(pmic, id); + if (ret < 0) + return ret; + + if (ret != MAX77620_POWER_MODE_DISABLE) + return 1; + + return 0; +} + +static int max77620_regulator_set_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct max77620_regulator *pmic = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + struct max77620_regulator_info *rinfo = pmic->rinfo[id]; + struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[id]; + bool fpwm = false; + int power_mode; + int ret; + u8 val; + + switch (mode) { + case REGULATOR_MODE_FAST: + fpwm = true; + power_mode = MAX77620_POWER_MODE_NORMAL; + break; + + case REGULATOR_MODE_NORMAL: + power_mode = MAX77620_POWER_MODE_NORMAL; + break; + + case REGULATOR_MODE_IDLE: + power_mode = MAX77620_POWER_MODE_LPM; + break; + + default: + dev_err(pmic->dev, "Regulator %d mode %d is invalid\n", + id, mode); + return -EINVAL; + } + + if (rinfo->type != MAX77620_REGULATOR_TYPE_SD) + goto skip_fpwm; + + val = (fpwm) ? MAX77620_SD_FPWM_MASK : 0; + ret = regmap_update_bits(pmic->rmap, rinfo->cfg_addr, + MAX77620_SD_FPWM_MASK, val); + if (ret < 0) { + dev_err(pmic->dev, "Reg 0x%02x update failed: %d\n", + rinfo->cfg_addr, ret); + return ret; + } + rpdata->current_mode = mode; + +skip_fpwm: + ret = max77620_regulator_set_power_mode(pmic, power_mode, id); + if (ret < 0) + return ret; + + pmic->enable_power_mode[id] = power_mode; + + return 0; +} + +static unsigned int max77620_regulator_get_mode(struct regulator_dev *rdev) +{ + struct max77620_regulator *pmic = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + struct max77620_regulator_info *rinfo = pmic->rinfo[id]; + int fpwm = 0; + int ret; + int pm_mode, reg_mode; + unsigned int val; + + ret = max77620_regulator_get_power_mode(pmic, id); + if (ret < 0) + return 0; + + pm_mode = ret; + + if (rinfo->type == MAX77620_REGULATOR_TYPE_SD) { + ret = regmap_read(pmic->rmap, rinfo->cfg_addr, &val); + if (ret < 0) { + dev_err(pmic->dev, "Reg 0x%02x read failed: %d\n", + rinfo->cfg_addr, ret); + return ret; + } + fpwm = !!(val & MAX77620_SD_FPWM_MASK); + } + + switch (pm_mode) { + case MAX77620_POWER_MODE_NORMAL: + case MAX77620_POWER_MODE_DISABLE: + if (fpwm) + reg_mode = REGULATOR_MODE_FAST; + else + reg_mode = REGULATOR_MODE_NORMAL; + break; + case MAX77620_POWER_MODE_LPM: + case MAX77620_POWER_MODE_GLPM: + reg_mode = REGULATOR_MODE_IDLE; + break; + default: + return 0; + } + + return reg_mode; +} + +static int max77620_regulator_set_ramp_delay(struct regulator_dev *rdev, + int ramp_delay) +{ + struct max77620_regulator *pmic = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + struct max77620_regulator_info *rinfo = pmic->rinfo[id]; + int ret, val; + u8 mask; + + if (rinfo->type == MAX77620_REGULATOR_TYPE_SD) { + if (ramp_delay <= 13750) + val = 0; + else if (ramp_delay <= 27500) + val = 1; + else if (ramp_delay <= 55000) + val = 2; + else + val = 3; + val <<= MAX77620_SD_SR_SHIFT; + mask = MAX77620_SD_SR_MASK; + } else { + if (ramp_delay <= 5000) + val = 1; + else + val = 0; + mask = MAX77620_LDO_SLEW_RATE_MASK; + } + + ret = regmap_update_bits(pmic->rmap, rinfo->cfg_addr, mask, val); + if (ret < 0) + dev_err(pmic->dev, "Reg 0x%02x update failed: %d\n", + rinfo->cfg_addr, ret); + + return ret; +} + +static int max77620_of_parse_cb(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *config) +{ + struct max77620_regulator *pmic = config->driver_data; + struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[desc->id]; + u32 pval; + int ret; + + ret = of_property_read_u32(np, "maxim,active-fps-source", &pval); + rpdata->active_fps_src = (!ret) ? pval : MAX77620_FPS_SRC_DEF; + + ret = of_property_read_u32(np, "maxim,active-fps-power-up-slot", &pval); + rpdata->active_fps_pu_slot = (!ret) ? pval : -1; + + ret = of_property_read_u32( + np, "maxim,active-fps-power-down-slot", &pval); + rpdata->active_fps_pd_slot = (!ret) ? pval : -1; + + ret = of_property_read_u32(np, "maxim,suspend-fps-source", &pval); + rpdata->suspend_fps_src = (!ret) ? pval : -1; + + ret = of_property_read_u32( + np, "maxim,suspend-fps-power-up-slot", &pval); + rpdata->suspend_fps_pu_slot = (!ret) ? pval : -1; + + ret = of_property_read_u32( + np, "maxim,suspend-fps-power-down-slot", &pval); + rpdata->suspend_fps_pd_slot = (!ret) ? pval : -1; + + return max77620_init_pmic(pmic, desc->id); +} + +static struct regulator_ops max77620_regulator_ops = { + .is_enabled = max77620_regulator_is_enabled, + .enable = max77620_regulator_enable, + .disable = max77620_regulator_disable, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_mode = max77620_regulator_set_mode, + .get_mode = max77620_regulator_get_mode, + .set_ramp_delay = max77620_regulator_set_ramp_delay, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_active_discharge = regulator_set_active_discharge_regmap, +}; + +#define MAX77620_SD_CNF2_ROVS_EN_NONE 0 +#define RAIL_SD(_id, _name, _sname, _volt_mask, _min_uV, _max_uV, \ + _step_uV, _rs_add, _rs_mask) \ + [MAX77620_REGULATOR_ID_##_id] = { \ + .type = MAX77620_REGULATOR_TYPE_SD, \ + .volt_addr = MAX77620_REG_##_id, \ + .cfg_addr = MAX77620_REG_##_id##_CFG, \ + .fps_addr = MAX77620_REG_FPS_##_id, \ + .remote_sense_addr = _rs_add, \ + .remote_sense_mask = MAX77620_SD_CNF2_ROVS_EN_##_rs_mask, \ + .power_mode_mask = MAX77620_SD_POWER_MODE_MASK, \ + .power_mode_shift = MAX77620_SD_POWER_MODE_SHIFT, \ + .desc = { \ + .name = max77620_rails(_name), \ + .of_match = of_match_ptr(#_name), \ + .regulators_node = of_match_ptr("regulators"), \ + .of_parse_cb = max77620_of_parse_cb, \ + .supply_name = _sname, \ + .id = MAX77620_REGULATOR_ID_##_id, \ + .ops = &max77620_regulator_ops, \ + .n_voltages = ((_max_uV - _min_uV) / _step_uV) + 1, \ + .min_uV = _min_uV, \ + .uV_step = _step_uV, \ + .enable_time = 500, \ + .vsel_mask = MAX77620_##_volt_mask##_VOLT_MASK, \ + .vsel_reg = MAX77620_REG_##_id, \ + .active_discharge_off = 0, \ + .active_discharge_on = MAX77620_SD_CFG1_ADE_ENABLE, \ + .active_discharge_mask = MAX77620_SD_CFG1_ADE_MASK, \ + .active_discharge_reg = MAX77620_REG_##_id##_CFG, \ + .type = REGULATOR_VOLTAGE, \ + }, \ + } + +#define RAIL_LDO(_id, _name, _sname, _type, _min_uV, _max_uV, _step_uV) \ + [MAX77620_REGULATOR_ID_##_id] = { \ + .type = MAX77620_REGULATOR_TYPE_LDO_##_type, \ + .volt_addr = MAX77620_REG_##_id##_CFG, \ + .cfg_addr = MAX77620_REG_##_id##_CFG2, \ + .fps_addr = MAX77620_REG_FPS_##_id, \ + .remote_sense_addr = 0xFF, \ + .power_mode_mask = MAX77620_LDO_POWER_MODE_MASK, \ + .power_mode_shift = MAX77620_LDO_POWER_MODE_SHIFT, \ + .desc = { \ + .name = max77620_rails(_name), \ + .of_match = of_match_ptr(#_name), \ + .regulators_node = of_match_ptr("regulators"), \ + .of_parse_cb = max77620_of_parse_cb, \ + .supply_name = _sname, \ + .id = MAX77620_REGULATOR_ID_##_id, \ + .ops = &max77620_regulator_ops, \ + .n_voltages = ((_max_uV - _min_uV) / _step_uV) + 1, \ + .min_uV = _min_uV, \ + .uV_step = _step_uV, \ + .enable_time = 500, \ + .vsel_mask = MAX77620_LDO_VOLT_MASK, \ + .vsel_reg = MAX77620_REG_##_id##_CFG, \ + .active_discharge_off = 0, \ + .active_discharge_on = MAX77620_LDO_CFG2_ADE_ENABLE, \ + .active_discharge_mask = MAX77620_LDO_CFG2_ADE_MASK, \ + .active_discharge_reg = MAX77620_REG_##_id##_CFG2, \ + .type = REGULATOR_VOLTAGE, \ + }, \ + } + +static struct max77620_regulator_info max77620_regs_info[MAX77620_NUM_REGS] = { + RAIL_SD(SD0, sd0, "in-sd0", SD0, 600000, 1400000, 12500, 0x22, SD0), + RAIL_SD(SD1, sd1, "in-sd1", SD1, 600000, 1550000, 12500, 0x22, SD1), + RAIL_SD(SD2, sd2, "in-sd2", SDX, 600000, 3787500, 12500, 0xFF, NONE), + RAIL_SD(SD3, sd3, "in-sd3", SDX, 600000, 3787500, 12500, 0xFF, NONE), + RAIL_SD(SD4, sd4, "in-sd4", SDX, 600000, 3787500, 12500, 0xFF, NONE), + + RAIL_LDO(LDO0, ldo0, "in-ldo0-1", N, 800000, 2375000, 25000), + RAIL_LDO(LDO1, ldo1, "in-ldo0-1", N, 800000, 2375000, 25000), + RAIL_LDO(LDO2, ldo2, "in-ldo2", P, 800000, 3950000, 50000), + RAIL_LDO(LDO3, ldo3, "in-ldo3-5", P, 800000, 3950000, 50000), + RAIL_LDO(LDO4, ldo4, "in-ldo4-6", P, 800000, 1587500, 12500), + RAIL_LDO(LDO5, ldo5, "in-ldo3-5", P, 800000, 3950000, 50000), + RAIL_LDO(LDO6, ldo6, "in-ldo4-6", P, 800000, 3950000, 50000), + RAIL_LDO(LDO7, ldo7, "in-ldo7-8", N, 800000, 3950000, 50000), + RAIL_LDO(LDO8, ldo8, "in-ldo7-8", N, 800000, 3950000, 50000), +}; + +static struct max77620_regulator_info max20024_regs_info[MAX77620_NUM_REGS] = { + RAIL_SD(SD0, sd0, "in-sd0", SD0, 800000, 1587500, 12500, 0x22, SD0), + RAIL_SD(SD1, sd1, "in-sd1", SD1, 600000, 3387500, 12500, 0x22, SD1), + RAIL_SD(SD2, sd2, "in-sd2", SDX, 600000, 3787500, 12500, 0xFF, NONE), + RAIL_SD(SD3, sd3, "in-sd3", SDX, 600000, 3787500, 12500, 0xFF, NONE), + RAIL_SD(SD4, sd4, "in-sd4", SDX, 600000, 3787500, 12500, 0xFF, NONE), + + RAIL_LDO(LDO0, ldo0, "in-ldo0-1", N, 800000, 2375000, 25000), + RAIL_LDO(LDO1, ldo1, "in-ldo0-1", N, 800000, 2375000, 25000), + RAIL_LDO(LDO2, ldo2, "in-ldo2", P, 800000, 3950000, 50000), + RAIL_LDO(LDO3, ldo3, "in-ldo3-5", P, 800000, 3950000, 50000), + RAIL_LDO(LDO4, ldo4, "in-ldo4-6", P, 800000, 1587500, 12500), + RAIL_LDO(LDO5, ldo5, "in-ldo3-5", P, 800000, 3950000, 50000), + RAIL_LDO(LDO6, ldo6, "in-ldo4-6", P, 800000, 3950000, 50000), + RAIL_LDO(LDO7, ldo7, "in-ldo7-8", N, 800000, 3950000, 50000), + RAIL_LDO(LDO8, ldo8, "in-ldo7-8", N, 800000, 3950000, 50000), +}; + +static int max77620_regulator_probe(struct platform_device *pdev) +{ + struct max77620_chip *max77620_chip = dev_get_drvdata(pdev->dev.parent); + struct max77620_regulator_info *rinfo; + struct device *dev = &pdev->dev; + struct regulator_config config = { }; + struct max77620_regulator *pmic; + int ret = 0; + int id; + + pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL); + if (!pmic) + return -ENOMEM; + + platform_set_drvdata(pdev, pmic); + pmic->dev = dev; + pmic->rmap = max77620_chip->rmap; + if (!dev->of_node) + dev->of_node = pdev->dev.parent->of_node; + + switch (max77620_chip->chip_id) { + case MAX77620: + rinfo = max77620_regs_info; + break; + default: + rinfo = max20024_regs_info; + break; + } + + config.regmap = pmic->rmap; + config.dev = dev; + config.driver_data = pmic; + + for (id = 0; id < MAX77620_NUM_REGS; id++) { + struct regulator_dev *rdev; + struct regulator_desc *rdesc; + + if ((max77620_chip->chip_id == MAX77620) && + (id == MAX77620_REGULATOR_ID_SD4)) + continue; + + rdesc = &rinfo[id].desc; + pmic->rinfo[id] = &max77620_regs_info[id]; + pmic->enable_power_mode[id] = MAX77620_POWER_MODE_NORMAL; + + ret = max77620_read_slew_rate(pmic, id); + if (ret < 0) + return ret; + + rdev = devm_regulator_register(dev, rdesc, &config); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); + dev_err(dev, "Regulator registration %s failed: %d\n", + rdesc->name, ret); + return ret; + } + } + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int max77620_regulator_suspend(struct device *dev) +{ + struct max77620_regulator *pmic = dev_get_drvdata(dev); + struct max77620_regulator_pdata *reg_pdata; + int id; + + for (id = 0; id < MAX77620_NUM_REGS; id++) { + reg_pdata = &pmic->reg_pdata[id]; + + max77620_regulator_set_fps_slots(pmic, id, true); + if (reg_pdata->suspend_fps_src < 0) + continue; + + max77620_regulator_set_fps_src(pmic, reg_pdata->suspend_fps_src, + id); + } + + return 0; +} + +static int max77620_regulator_resume(struct device *dev) +{ + struct max77620_regulator *pmic = dev_get_drvdata(dev); + struct max77620_regulator_pdata *reg_pdata; + int id; + + for (id = 0; id < MAX77620_NUM_REGS; id++) { + reg_pdata = &pmic->reg_pdata[id]; + + max77620_regulator_set_fps_slots(pmic, id, false); + if (reg_pdata->active_fps_src < 0) + continue; + max77620_regulator_set_fps_src(pmic, reg_pdata->active_fps_src, + id); + } + + return 0; +} +#endif + +static const struct dev_pm_ops max77620_regulator_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(max77620_regulator_suspend, + max77620_regulator_resume) +}; + +static const struct platform_device_id max77620_regulator_devtype[] = { + { .name = "max77620-pmic", }, + { .name = "max20024-pmic", }, + {}, +}; +MODULE_DEVICE_TABLE(platform, max77620_regulator_devtype); + +static struct platform_driver max77620_regulator_driver = { + .probe = max77620_regulator_probe, + .id_table = max77620_regulator_devtype, + .driver = { + .name = "max77620-pmic", + .pm = &max77620_regulator_pm_ops, + }, +}; + +module_platform_driver(max77620_regulator_driver); + +MODULE_DESCRIPTION("MAX77620/MAX20024 regulator driver"); +MODULE_AUTHOR("Mallikarjun Kasoju <mkasoju@nvidia.com>"); +MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686-regulator.c index 17ccf365a9c0..17ccf365a9c0 100644 --- a/drivers/regulator/max77686.c +++ b/drivers/regulator/max77686-regulator.c diff --git a/drivers/regulator/max77802.c b/drivers/regulator/max77802-regulator.c index c07ee13bd470..c07ee13bd470 100644 --- a/drivers/regulator/max77802.c +++ b/drivers/regulator/max77802-regulator.c diff --git a/drivers/regulator/mt6397-regulator.c b/drivers/regulator/mt6397-regulator.c index a5b2f4762677..17a5b6c2d6a9 100644 --- a/drivers/regulator/mt6397-regulator.c +++ b/drivers/regulator/mt6397-regulator.c @@ -317,11 +317,25 @@ static int mt6397_regulator_probe(struct platform_device *pdev) return 0; } +static const struct platform_device_id mt6397_platform_ids[] = { + {"mt6397-regulator", 0}, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(platform, mt6397_platform_ids); + +static const struct of_device_id mt6397_of_match[] = { + { .compatible = "mediatek,mt6397-regulator", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, mt6397_of_match); + static struct platform_driver mt6397_regulator_driver = { .driver = { .name = "mt6397-regulator", + .of_match_table = of_match_ptr(mt6397_of_match), }, .probe = mt6397_regulator_probe, + .id_table = mt6397_platform_ids, }; module_platform_driver(mt6397_regulator_driver); @@ -329,4 +343,3 @@ module_platform_driver(mt6397_regulator_driver); MODULE_AUTHOR("Flora Fu <flora.fu@mediatek.com>"); MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6397 PMIC"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:mt6397-regulator"); diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 499e437c7e91..6b0aa80b22fd 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -28,7 +28,6 @@ static void of_get_regulation_constraints(struct device_node *np, struct regulator_init_data **init_data, const struct regulator_desc *desc) { - const __be32 *min_uV, *max_uV; struct regulation_constraints *constraints = &(*init_data)->constraints; struct regulator_state *suspend_state; struct device_node *suspend_np; @@ -37,18 +36,18 @@ static void of_get_regulation_constraints(struct device_node *np, constraints->name = of_get_property(np, "regulator-name", NULL); - min_uV = of_get_property(np, "regulator-min-microvolt", NULL); - if (min_uV) - constraints->min_uV = be32_to_cpu(*min_uV); - max_uV = of_get_property(np, "regulator-max-microvolt", NULL); - if (max_uV) - constraints->max_uV = be32_to_cpu(*max_uV); + if (!of_property_read_u32(np, "regulator-min-microvolt", &pval)) + constraints->min_uV = pval; + + if (!of_property_read_u32(np, "regulator-max-microvolt", &pval)) + constraints->max_uV = pval; /* Voltage change possible? */ if (constraints->min_uV != constraints->max_uV) constraints->valid_ops_mask |= REGULATOR_CHANGE_VOLTAGE; /* Only one voltage? Then make sure it's set. */ - if (min_uV && max_uV && constraints->min_uV == constraints->max_uV) + if (constraints->min_uV && constraints->max_uV && + constraints->min_uV == constraints->max_uV) constraints->apply_uV = true; if (!of_property_read_u32(np, "regulator-microvolt-offset", &pval)) @@ -93,6 +92,12 @@ static void of_get_regulation_constraints(struct device_node *np, constraints->soft_start = of_property_read_bool(np, "regulator-soft-start"); + ret = of_property_read_u32(np, "regulator-active-discharge", &pval); + if (!ret) { + constraints->active_discharge = + (pval) ? REGULATOR_ACTIVE_DISCHARGE_ENABLE : + REGULATOR_ACTIVE_DISCHARGE_DISABLE; + } if (!of_property_read_u32(np, "regulator-initial-mode", &pval)) { if (desc && desc->of_map_mode) { diff --git a/drivers/regulator/pv88060-regulator.c b/drivers/regulator/pv88060-regulator.c index 094376c8de4b..c448b727f5f8 100644 --- a/drivers/regulator/pv88060-regulator.c +++ b/drivers/regulator/pv88060-regulator.c @@ -285,8 +285,8 @@ static irqreturn_t pv88060_irq_handler(int irq, void *data) } } - err = regmap_update_bits(chip->regmap, PV88060_REG_EVENT_A, - PV88060_E_VDD_FLT, PV88060_E_VDD_FLT); + err = regmap_write(chip->regmap, PV88060_REG_EVENT_A, + PV88060_E_VDD_FLT); if (err < 0) goto error_i2c; @@ -302,8 +302,8 @@ static irqreturn_t pv88060_irq_handler(int irq, void *data) } } - err = regmap_update_bits(chip->regmap, PV88060_REG_EVENT_A, - PV88060_E_OVER_TEMP, PV88060_E_OVER_TEMP); + err = regmap_write(chip->regmap, PV88060_REG_EVENT_A, + PV88060_E_OVER_TEMP); if (err < 0) goto error_i2c; diff --git a/drivers/regulator/pv88090-regulator.c b/drivers/regulator/pv88090-regulator.c index ac15f31b5fe0..0057c6740d6f 100644 --- a/drivers/regulator/pv88090-regulator.c +++ b/drivers/regulator/pv88090-regulator.c @@ -283,8 +283,8 @@ static irqreturn_t pv88090_irq_handler(int irq, void *data) } } - err = regmap_update_bits(chip->regmap, PV88090_REG_EVENT_A, - PV88090_E_VDD_FLT, PV88090_E_VDD_FLT); + err = regmap_write(chip->regmap, PV88090_REG_EVENT_A, + PV88090_E_VDD_FLT); if (err < 0) goto error_i2c; @@ -300,8 +300,8 @@ static irqreturn_t pv88090_irq_handler(int irq, void *data) } } - err = regmap_update_bits(chip->regmap, PV88090_REG_EVENT_A, - PV88090_E_OVER_TEMP, PV88090_E_OVER_TEMP); + err = regmap_write(chip->regmap, PV88090_REG_EVENT_A, + PV88090_E_OVER_TEMP); if (err < 0) goto error_i2c; diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c index 3aca067b9901..4689d62f4841 100644 --- a/drivers/regulator/pwm-regulator.c +++ b/drivers/regulator/pwm-regulator.c @@ -27,6 +27,13 @@ struct pwm_regulator_data { /* Voltage table */ struct pwm_voltages *duty_cycle_table; + + /* regulator descriptor */ + struct regulator_desc desc; + + /* Regulator ops */ + struct regulator_ops ops; + int state; /* Continuous voltage */ @@ -115,7 +122,7 @@ static int pwm_voltage_to_duty_cycle_percentage(struct regulator_dev *rdev, int int max_uV = rdev->constraints->max_uV; int diff = max_uV - min_uV; - return 100 - (((req_uV * 100) - (min_uV * 100)) / diff); + return ((req_uV * 100) - (min_uV * 100)) / diff; } static int pwm_regulator_get_voltage(struct regulator_dev *rdev) @@ -212,8 +219,10 @@ static int pwm_regulator_init_table(struct platform_device *pdev, } drvdata->duty_cycle_table = duty_cycle_table; - pwm_regulator_desc.ops = &pwm_regulator_voltage_table_ops; - pwm_regulator_desc.n_voltages = length / sizeof(*duty_cycle_table); + memcpy(&drvdata->ops, &pwm_regulator_voltage_table_ops, + sizeof(drvdata->ops)); + drvdata->desc.ops = &drvdata->ops; + drvdata->desc.n_voltages = length / sizeof(*duty_cycle_table); return 0; } @@ -221,8 +230,10 @@ static int pwm_regulator_init_table(struct platform_device *pdev, static int pwm_regulator_init_continuous(struct platform_device *pdev, struct pwm_regulator_data *drvdata) { - pwm_regulator_desc.ops = &pwm_regulator_voltage_continuous_ops; - pwm_regulator_desc.continuous_voltage_range = true; + memcpy(&drvdata->ops, &pwm_regulator_voltage_continuous_ops, + sizeof(drvdata->ops)); + drvdata->desc.ops = &drvdata->ops; + drvdata->desc.continuous_voltage_range = true; return 0; } @@ -245,6 +256,8 @@ static int pwm_regulator_probe(struct platform_device *pdev) if (!drvdata) return -ENOMEM; + memcpy(&drvdata->desc, &pwm_regulator_desc, sizeof(drvdata->desc)); + if (of_find_property(np, "voltage-table", NULL)) ret = pwm_regulator_init_table(pdev, drvdata); else @@ -253,7 +266,7 @@ static int pwm_regulator_probe(struct platform_device *pdev) return ret; init_data = of_get_regulator_init_data(&pdev->dev, np, - &pwm_regulator_desc); + &drvdata->desc); if (!init_data) return -ENOMEM; @@ -269,10 +282,10 @@ static int pwm_regulator_probe(struct platform_device *pdev) } regulator = devm_regulator_register(&pdev->dev, - &pwm_regulator_desc, &config); + &drvdata->desc, &config); if (IS_ERR(regulator)) { dev_err(&pdev->dev, "Failed to register regulator %s\n", - pwm_regulator_desc.name); + drvdata->desc.name); return PTR_ERR(regulator); } diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index 3242ffc0cb25..d24e2c783dc5 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -38,7 +38,6 @@ /* The highest number of possible regulators for supported devices. */ #define S2MPS_REGULATOR_MAX S2MPS13_REGULATOR_MAX struct s2mps11_info { - unsigned int rdev_num; int ramp_delay2; int ramp_delay34; int ramp_delay5; @@ -54,7 +53,10 @@ struct s2mps11_info { */ DECLARE_BITMAP(suspend_state, S2MPS_REGULATOR_MAX); - /* Array of size rdev_num with GPIO-s for external sleep control */ + /* + * Array (size: number of regulators) with GPIO-s for external + * sleep control. + */ int *ext_control_gpio; }; @@ -819,7 +821,8 @@ static void s2mps14_pmic_dt_parse_ext_control_gpio(struct platform_device *pdev, } static int s2mps11_pmic_dt_parse(struct platform_device *pdev, - struct of_regulator_match *rdata, struct s2mps11_info *s2mps11) + struct of_regulator_match *rdata, struct s2mps11_info *s2mps11, + unsigned int rdev_num) { struct device_node *reg_np; @@ -829,7 +832,7 @@ static int s2mps11_pmic_dt_parse(struct platform_device *pdev, return -EINVAL; } - of_regulator_match(&pdev->dev, reg_np, rdata, s2mps11->rdev_num); + of_regulator_match(&pdev->dev, reg_np, rdata, rdev_num); if (s2mps11->dev_type == S2MPS14X) s2mps14_pmic_dt_parse_ext_control_gpio(pdev, rdata, s2mps11); @@ -1077,6 +1080,7 @@ static int s2mps11_pmic_probe(struct platform_device *pdev) struct of_regulator_match *rdata = NULL; struct regulator_config config = { }; struct s2mps11_info *s2mps11; + unsigned int rdev_num = 0; int i, ret = 0; const struct regulator_desc *regulators; @@ -1088,28 +1092,29 @@ static int s2mps11_pmic_probe(struct platform_device *pdev) s2mps11->dev_type = platform_get_device_id(pdev)->driver_data; switch (s2mps11->dev_type) { case S2MPS11X: - s2mps11->rdev_num = ARRAY_SIZE(s2mps11_regulators); + rdev_num = ARRAY_SIZE(s2mps11_regulators); regulators = s2mps11_regulators; - BUILD_BUG_ON(S2MPS_REGULATOR_MAX < s2mps11->rdev_num); + BUILD_BUG_ON(S2MPS_REGULATOR_MAX < ARRAY_SIZE(s2mps11_regulators)); break; case S2MPS13X: - s2mps11->rdev_num = ARRAY_SIZE(s2mps13_regulators); + rdev_num = ARRAY_SIZE(s2mps13_regulators); regulators = s2mps13_regulators; - BUILD_BUG_ON(S2MPS_REGULATOR_MAX < s2mps11->rdev_num); + BUILD_BUG_ON(S2MPS_REGULATOR_MAX < ARRAY_SIZE(s2mps13_regulators)); break; case S2MPS14X: - s2mps11->rdev_num = ARRAY_SIZE(s2mps14_regulators); + rdev_num = ARRAY_SIZE(s2mps14_regulators); regulators = s2mps14_regulators; - BUILD_BUG_ON(S2MPS_REGULATOR_MAX < s2mps11->rdev_num); + BUILD_BUG_ON(S2MPS_REGULATOR_MAX < ARRAY_SIZE(s2mps14_regulators)); break; case S2MPS15X: - s2mps11->rdev_num = ARRAY_SIZE(s2mps15_regulators); + rdev_num = ARRAY_SIZE(s2mps15_regulators); regulators = s2mps15_regulators; + BUILD_BUG_ON(S2MPS_REGULATOR_MAX < ARRAY_SIZE(s2mps15_regulators)); break; case S2MPU02: - s2mps11->rdev_num = ARRAY_SIZE(s2mpu02_regulators); + rdev_num = ARRAY_SIZE(s2mpu02_regulators); regulators = s2mpu02_regulators; - BUILD_BUG_ON(S2MPS_REGULATOR_MAX < s2mps11->rdev_num); + BUILD_BUG_ON(S2MPS_REGULATOR_MAX < ARRAY_SIZE(s2mpu02_regulators)); break; default: dev_err(&pdev->dev, "Invalid device type: %u\n", @@ -1118,7 +1123,7 @@ static int s2mps11_pmic_probe(struct platform_device *pdev) } s2mps11->ext_control_gpio = devm_kmalloc(&pdev->dev, - sizeof(*s2mps11->ext_control_gpio) * s2mps11->rdev_num, + sizeof(*s2mps11->ext_control_gpio) * rdev_num, GFP_KERNEL); if (!s2mps11->ext_control_gpio) return -ENOMEM; @@ -1126,7 +1131,7 @@ static int s2mps11_pmic_probe(struct platform_device *pdev) * 0 is a valid GPIO so initialize all GPIO-s to negative value * to indicate that external control won't be used for this regulator. */ - for (i = 0; i < s2mps11->rdev_num; i++) + for (i = 0; i < rdev_num; i++) s2mps11->ext_control_gpio[i] = -EINVAL; if (!iodev->dev->of_node) { @@ -1140,14 +1145,14 @@ static int s2mps11_pmic_probe(struct platform_device *pdev) } } - rdata = kzalloc(sizeof(*rdata) * s2mps11->rdev_num, GFP_KERNEL); + rdata = kzalloc(sizeof(*rdata) * rdev_num, GFP_KERNEL); if (!rdata) return -ENOMEM; - for (i = 0; i < s2mps11->rdev_num; i++) + for (i = 0; i < rdev_num; i++) rdata[i].name = regulators[i].name; - ret = s2mps11_pmic_dt_parse(pdev, rdata, s2mps11); + ret = s2mps11_pmic_dt_parse(pdev, rdata, s2mps11, rdev_num); if (ret) goto out; @@ -1159,7 +1164,7 @@ common_reg: config.driver_data = s2mps11; config.ena_gpio_flags = GPIOF_OUT_INIT_HIGH; config.ena_gpio_initialized = true; - for (i = 0; i < s2mps11->rdev_num; i++) { + for (i = 0; i < rdev_num; i++) { struct regulator_dev *regulator; if (pdata) { diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c index 58f5d3b8e981..27343e1c43ef 100644 --- a/drivers/regulator/s5m8767.c +++ b/drivers/regulator/s5m8767.c @@ -202,9 +202,10 @@ static int s5m8767_get_register(struct s5m8767_info *s5m8767, int reg_id, } } - if (i < s5m8767->num_regulators) - *enable_ctrl = - s5m8767_opmode_reg[reg_id][mode] << S5M8767_ENCTRL_SHIFT; + if (i >= s5m8767->num_regulators) + return -EINVAL; + + *enable_ctrl = s5m8767_opmode_reg[reg_id][mode] << S5M8767_ENCTRL_SHIFT; return 0; } @@ -937,8 +938,12 @@ static int s5m8767_pmic_probe(struct platform_device *pdev) else regulators[id].vsel_mask = 0xff; - s5m8767_get_register(s5m8767, id, &enable_reg, + ret = s5m8767_get_register(s5m8767, id, &enable_reg, &enable_val); + if (ret) { + dev_err(s5m8767->dev, "error reading registers\n"); + return ret; + } regulators[id].enable_reg = enable_reg; regulators[id].enable_mask = S5M8767_ENCTRL_MASK; regulators[id].enable_val = enable_val; diff --git a/drivers/regulator/vexpress.c b/drivers/regulator/vexpress-regulator.c index c810cbbd463f..c810cbbd463f 100644 --- a/drivers/regulator/vexpress.c +++ b/drivers/regulator/vexpress-regulator.c diff --git a/include/linux/regulator/act8865.h b/include/linux/regulator/act8865.h index 15fa8f2d35c9..2eb386017fa5 100644 --- a/include/linux/regulator/act8865.h +++ b/include/linux/regulator/act8865.h @@ -68,12 +68,12 @@ enum { * act8865_regulator_data - regulator data * @id: regulator id * @name: regulator name - * @platform_data: regulator init data + * @init_data: regulator init data */ struct act8865_regulator_data { int id; const char *name; - struct regulator_init_data *platform_data; + struct regulator_init_data *init_data; }; /** diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 16ac9e108806..cd271e89a7e6 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -93,6 +93,8 @@ struct regulator_linear_range { * @get_current_limit: Get the configured limit for a current-limited regulator. * @set_input_current_limit: Configure an input limit. * + * @set_active_discharge: Set active discharge enable/disable of regulators. + * * @set_mode: Set the configured operating mode for the regulator. * @get_mode: Get the configured operating mode for the regulator. * @get_status: Return actual (not as-configured) status of regulator, as a @@ -149,6 +151,7 @@ struct regulator_ops { int (*set_input_current_limit) (struct regulator_dev *, int lim_uA); int (*set_over_current_protection) (struct regulator_dev *); + int (*set_active_discharge) (struct regulator_dev *, bool enable); /* enable/disable regulator */ int (*enable) (struct regulator_dev *); @@ -266,6 +269,14 @@ enum regulator_type { * @bypass_mask: Mask for control when using regmap set_bypass * @bypass_val_on: Enabling value for control when using regmap set_bypass * @bypass_val_off: Disabling value for control when using regmap set_bypass + * @active_discharge_off: Enabling value for control when using regmap + * set_active_discharge + * @active_discharge_on: Disabling value for control when using regmap + * set_active_discharge + * @active_discharge_mask: Mask for control when using regmap + * set_active_discharge + * @active_discharge_reg: Register for control when using regmap + * set_active_discharge * * @enable_time: Time taken for initial enable of regulator (in uS). * @off_on_delay: guard time (in uS), before re-enabling a regulator @@ -315,6 +326,10 @@ struct regulator_desc { unsigned int bypass_mask; unsigned int bypass_val_on; unsigned int bypass_val_off; + unsigned int active_discharge_on; + unsigned int active_discharge_off; + unsigned int active_discharge_mask; + unsigned int active_discharge_reg; unsigned int enable_time; @@ -447,6 +462,8 @@ int regulator_set_voltage_time_sel(struct regulator_dev *rdev, int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable); int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable); +int regulator_set_active_discharge_regmap(struct regulator_dev *rdev, + bool enable); void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data); #endif diff --git a/include/linux/regulator/lp872x.h b/include/linux/regulator/lp872x.h index 132e05c46661..6029279f4eed 100644 --- a/include/linux/regulator/lp872x.h +++ b/include/linux/regulator/lp872x.h @@ -18,6 +18,9 @@ #define LP872X_MAX_REGULATORS 9 +#define LP8720_ENABLE_DELAY 200 +#define LP8725_ENABLE_DELAY 30000 + enum lp872x_regulator_id { LP8720_ID_BASE, LP8720_ID_LDO1 = LP8720_ID_BASE, @@ -79,12 +82,14 @@ struct lp872x_regulator_data { * @update_config : if LP872X_GENERAL_CFG register is updated, set true * @regulator_data : platform regulator id and init data * @dvs : dvs data for buck voltage control + * @enable_gpio : gpio pin number for enable control */ struct lp872x_platform_data { u8 general_config; bool update_config; struct lp872x_regulator_data regulator_data[LP872X_MAX_REGULATORS]; struct lp872x_dvs *dvs; + int enable_gpio; }; #endif diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index a1067d0b3991..5d627c83a630 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -42,6 +42,13 @@ struct regulator; #define REGULATOR_CHANGE_DRMS 0x10 #define REGULATOR_CHANGE_BYPASS 0x20 +/* Regulator active discharge flags */ +enum regulator_active_discharge { + REGULATOR_ACTIVE_DISCHARGE_DEFAULT, + REGULATOR_ACTIVE_DISCHARGE_DISABLE, + REGULATOR_ACTIVE_DISCHARGE_ENABLE, +}; + /** * struct regulator_state - regulator state during low power system states * @@ -100,6 +107,9 @@ struct regulator_state { * @initial_state: Suspend state to set by default. * @initial_mode: Mode to set at startup. * @ramp_delay: Time to settle down after voltage change (unit: uV/us) + * @active_discharge: Enable/disable active discharge. The enum + * regulator_active_discharge values are used for + * initialisation. * @enable_time: Turn-on time of the rails (unit: microseconds) */ struct regulation_constraints { @@ -140,6 +150,8 @@ struct regulation_constraints { unsigned int ramp_delay; unsigned int enable_time; + unsigned int active_discharge; + /* constraint flags */ unsigned always_on:1; /* regulator never off when system is on */ unsigned boot_on:1; /* bootloader/firmware enabled regulator */ diff --git a/sound/soc/codecs/cs4271.c b/sound/soc/codecs/cs4271.c index e770ee6f36da..0c0010b25421 100644 --- a/sound/soc/codecs/cs4271.c +++ b/sound/soc/codecs/cs4271.c @@ -26,6 +26,7 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_gpio.h> +#include <linux/regulator/consumer.h> #include <sound/pcm.h> #include <sound/soc.h> #include <sound/tlv.h> @@ -157,6 +158,10 @@ static bool cs4271_volatile_reg(struct device *dev, unsigned int reg) return reg == CS4271_CHIPID; } +static const char * const supply_names[] = { + "vd", "vl", "va" +}; + struct cs4271_private { unsigned int mclk; bool master; @@ -170,6 +175,7 @@ struct cs4271_private { int gpio_disable; /* enable soft reset workaround */ bool enable_soft_reset; + struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)]; }; static const struct snd_soc_dapm_widget cs4271_dapm_widgets[] = { @@ -487,6 +493,20 @@ static struct snd_soc_dai_driver cs4271_dai = { .symmetric_rates = 1, }; +static int cs4271_reset(struct snd_soc_codec *codec) +{ + struct cs4271_private *cs4271 = snd_soc_codec_get_drvdata(codec); + + if (gpio_is_valid(cs4271->gpio_nreset)) { + gpio_set_value(cs4271->gpio_nreset, 0); + mdelay(1); + gpio_set_value(cs4271->gpio_nreset, 1); + mdelay(1); + } + + return 0; +} + #ifdef CONFIG_PM static int cs4271_soc_suspend(struct snd_soc_codec *codec) { @@ -499,6 +519,9 @@ static int cs4271_soc_suspend(struct snd_soc_codec *codec) if (ret < 0) return ret; + regcache_mark_dirty(cs4271->regmap); + regulator_bulk_disable(ARRAY_SIZE(cs4271->supplies), cs4271->supplies); + return 0; } @@ -507,6 +530,16 @@ static int cs4271_soc_resume(struct snd_soc_codec *codec) int ret; struct cs4271_private *cs4271 = snd_soc_codec_get_drvdata(codec); + ret = regulator_bulk_enable(ARRAY_SIZE(cs4271->supplies), + cs4271->supplies); + if (ret < 0) { + dev_err(codec->dev, "Failed to enable regulators: %d\n", ret); + return ret; + } + + /* Do a proper reset after power up */ + cs4271_reset(codec); + /* Restore codec state */ ret = regcache_sync(cs4271->regmap); if (ret < 0) @@ -553,19 +586,24 @@ static int cs4271_codec_probe(struct snd_soc_codec *codec) } #endif + ret = regulator_bulk_enable(ARRAY_SIZE(cs4271->supplies), + cs4271->supplies); + if (ret < 0) { + dev_err(codec->dev, "Failed to enable regulators: %d\n", ret); + return ret; + } + if (cs4271plat) { amutec_eq_bmutec = cs4271plat->amutec_eq_bmutec; cs4271->enable_soft_reset = cs4271plat->enable_soft_reset; } - if (gpio_is_valid(cs4271->gpio_nreset)) { - /* Reset codec */ - gpio_direction_output(cs4271->gpio_nreset, 0); - mdelay(1); - gpio_set_value(cs4271->gpio_nreset, 1); - /* Give the codec time to wake up */ - mdelay(1); - } + /* Reset codec */ + cs4271_reset(codec); + + ret = regcache_sync(cs4271->regmap); + if (ret < 0) + return ret; ret = regmap_update_bits(cs4271->regmap, CS4271_MODE2, CS4271_MODE2_PDN | CS4271_MODE2_CPEN, @@ -595,6 +633,9 @@ static int cs4271_codec_remove(struct snd_soc_codec *codec) /* Set codec to the reset state */ gpio_set_value(cs4271->gpio_nreset, 0); + regcache_mark_dirty(cs4271->regmap); + regulator_bulk_disable(ARRAY_SIZE(cs4271->supplies), cs4271->supplies); + return 0; }; @@ -617,6 +658,7 @@ static int cs4271_common_probe(struct device *dev, { struct cs4271_platform_data *cs4271plat = dev->platform_data; struct cs4271_private *cs4271; + int i, ret; cs4271 = devm_kzalloc(dev, sizeof(*cs4271), GFP_KERNEL); if (!cs4271) @@ -638,6 +680,17 @@ static int cs4271_common_probe(struct device *dev, return ret; } + for (i = 0; i < ARRAY_SIZE(supply_names); i++) + cs4271->supplies[i].supply = supply_names[i]; + + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(cs4271->supplies), + cs4271->supplies); + + if (ret < 0) { + dev_err(dev, "Failed to get regulators: %d\n", ret); + return ret; + } + *c = cs4271; return 0; } |