summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arm/arm,scpi.txt34
-rw-r--r--Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt45
-rw-r--r--Documentation/devicetree/bindings/clock/clps711x-clock.txt4
-rw-r--r--Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt4
-rw-r--r--Documentation/devicetree/bindings/input/clps711x-keypad.txt4
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt4
-rw-r--r--Documentation/devicetree/bindings/media/nokia,n900-ir20
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt136
-rw-r--r--Documentation/devicetree/bindings/pwm/cirrus,clps711x-pwm.txt5
-rw-r--r--Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt4
-rw-r--r--Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt18
-rw-r--r--Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt4
-rw-r--r--Documentation/devicetree/bindings/reset/ti-syscon-reset.txt91
-rw-r--r--Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt4
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt4
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt4
-rw-r--r--Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt6
-rw-r--r--Documentation/driver-model/devres.txt4
-rw-r--r--MAINTAINERS2
-rw-r--r--arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi29
-rw-r--r--arch/arm/boot/dts/exynos4210-origen.dts4
-rw-r--r--arch/arm/boot/dts/exynos4210-smdkv310.dts4
-rw-r--r--arch/arm/boot/dts/exynos4412-odroid-common.dtsi6
-rw-r--r--arch/arm/boot/dts/exynos4412-origen.dts4
-rw-r--r--arch/arm/boot/dts/exynos4412-smdk4412.dts4
-rw-r--r--arch/arm/boot/dts/exynos5250-arndale.dts4
-rw-r--r--arch/arm/boot/dts/exynos5250-smdk5250.dts4
-rw-r--r--arch/arm/boot/dts/exynos5250-spring.dts4
-rw-r--r--arch/arm/boot/dts/exynos5420-arndale-octa.dts4
-rw-r--r--arch/arm/boot/dts/exynos5420-peach-pit.dts4
-rw-r--r--arch/arm/boot/dts/exynos5420-smdk5420.dts4
-rw-r--r--arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi4
-rw-r--r--arch/arm/boot/dts/exynos5800-peach-pi.dts4
-rw-r--r--arch/arm/mach-exynos/Kconfig1
-rw-r--r--arch/arm/mach-exynos/Makefile3
-rw-r--r--arch/arm/mach-exynos/exynos.c19
-rw-r--r--arch/arm/mach-exynos/mfc.h16
-rw-r--r--arch/arm/mach-exynos/s5p-dev-mfc.c93
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c5
-rw-r--r--arch/arm/mach-omap2/pdata-quirks.c10
-rw-r--r--arch/arm/mach-ux500/Makefile6
-rw-r--r--arch/arm/mach-ux500/board-mop500-regulators.c1065
-rw-r--r--arch/arm/mach-ux500/board-mop500-regulators.h24
-rw-r--r--arch/arm/mach-ux500/cache-l2x0.c67
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c139
-rw-r--r--arch/arm/mach-ux500/cpu.c148
-rw-r--r--arch/arm/mach-ux500/id.c116
-rw-r--r--arch/arm/mach-ux500/id.h144
-rw-r--r--arch/arm/mach-ux500/platsmp.c1
-rw-r--r--arch/arm/mach-ux500/setup.h12
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi6220.dtsi2
-rw-r--r--drivers/bus/Kconfig13
-rw-r--r--drivers/bus/Makefile1
-rw-r--r--drivers/bus/tegra-aconnect.c112
-rw-r--r--drivers/clk/clk-clps711x.c2
-rw-r--r--drivers/clk/ux500/u8500_of_clk.c16
-rw-r--r--drivers/clk/ux500/u8540_clk.c16
-rw-r--r--drivers/clk/ux500/u9540_clk.c4
-rw-r--r--drivers/clocksource/clps711x-timer.c2
-rw-r--r--drivers/cpufreq/s5pv210-cpufreq.c68
-rw-r--r--drivers/firmware/Kconfig12
-rw-r--r--drivers/firmware/Makefile1
-rw-r--r--drivers/firmware/arm_scpi.c42
-rw-r--r--drivers/firmware/qcom_scm-32.c327
-rw-r--r--drivers/firmware/qcom_scm-64.c307
-rw-r--r--drivers/firmware/qcom_scm.c353
-rw-r--r--drivers/firmware/qcom_scm.h47
-rw-r--r--drivers/firmware/scpi_pm_domain.c163
-rw-r--r--drivers/input/keyboard/clps711x-keypad.c4
-rw-r--r--drivers/irqchip/irq-clps711x.c2
-rw-r--r--drivers/media/rc/Kconfig2
-rw-r--r--drivers/media/rc/ir-rx51.c229
-rw-r--r--drivers/memory/Kconfig11
-rw-r--r--drivers/memory/Makefile1
-rw-r--r--drivers/memory/atmel-ebi.c766
-rw-r--r--drivers/memory/atmel-sdramc.c11
-rw-r--r--drivers/memory/omap-gpmc.c136
-rw-r--r--drivers/memory/samsung/exynos-srom.c41
-rw-r--r--drivers/memory/tegra/mc.c10
-rw-r--r--drivers/memory/tegra/tegra124-emc.c8
-rw-r--r--drivers/mfd/ab8500-core.c4
-rw-r--r--drivers/mfd/ab8500-sysctrl.c34
-rw-r--r--drivers/mfd/db8500-prcmu.c10
-rw-r--r--drivers/power/reset/Kconfig10
-rw-r--r--drivers/power/reset/Makefile1
-rw-r--r--drivers/power/reset/brcm-kona-reset.c73
-rw-r--r--drivers/pwm/pwm-clps711x.c2
-rw-r--r--drivers/pwm/pwm-omap-dmtimer.c12
-rw-r--r--drivers/regulator/ab8500-ext.c465
-rw-r--r--drivers/reset/Kconfig14
-rw-r--r--drivers/reset/Makefile2
-rw-r--r--drivers/reset/core.c37
-rw-r--r--drivers/reset/hisilicon/hi6220_reset.c122
-rw-r--r--drivers/reset/reset-ath79.c3
-rw-r--r--drivers/reset/reset-meson.c136
-rw-r--r--drivers/reset/reset-oxnas.c12
-rw-r--r--drivers/reset/reset-pistachio.c12
-rw-r--r--drivers/reset/reset-socfpga.c12
-rw-r--r--drivers/reset/reset-sunxi.c12
-rw-r--r--drivers/reset/reset-ti-syscon.c237
-rw-r--r--drivers/reset/reset-zynq.c12
-rw-r--r--drivers/reset/sti/Kconfig1
-rw-r--r--drivers/soc/Kconfig2
-rw-r--r--drivers/soc/Makefile2
-rw-r--r--drivers/soc/bcm/Kconfig18
-rw-r--r--drivers/soc/bcm/Makefile1
-rw-r--r--drivers/soc/bcm/brcmstb/Makefile (renamed from drivers/soc/brcmstb/Makefile)0
-rw-r--r--drivers/soc/bcm/brcmstb/biuctrl.c (renamed from drivers/soc/brcmstb/biuctrl.c)1
-rw-r--r--drivers/soc/bcm/brcmstb/common.c (renamed from drivers/soc/brcmstb/common.c)0
-rw-r--r--drivers/soc/brcmstb/Kconfig10
-rw-r--r--drivers/soc/qcom/smem_state.c12
-rw-r--r--drivers/soc/qcom/smp2p.c7
-rw-r--r--drivers/soc/qcom/smsm.c2
-rw-r--r--drivers/soc/qcom/wcnss_ctrl.c125
-rw-r--r--drivers/soc/samsung/Kconfig4
-rw-r--r--drivers/soc/samsung/Makefile1
-rw-r--r--drivers/soc/samsung/exynos3250-pmu.c2
-rw-r--r--drivers/soc/samsung/exynos5420-pmu.c2
-rw-r--r--drivers/soc/samsung/pm_domains.c (renamed from arch/arm/mach-exynos/pm_domains.c)34
-rw-r--r--drivers/soc/tegra/pmc.c149
-rw-r--r--drivers/soc/ux500/Kconfig7
-rw-r--r--drivers/soc/ux500/Makefile1
-rw-r--r--drivers/soc/ux500/ux500-soc-id.c222
-rw-r--r--drivers/tty/serial/clps711x.c2
-rw-r--r--drivers/video/fbdev/clps711x-fb.c4
-rw-r--r--include/dt-bindings/reset/amlogic,meson-gxbb-reset.h210
-rw-r--r--include/dt-bindings/reset/amlogic,meson8b-reset.h175
-rw-r--r--include/dt-bindings/reset/hisi,hi6220-resets.h8
-rw-r--r--include/dt-bindings/reset/ti-syscon.h38
-rw-r--r--include/linux/mfd/abx500/ab8500-sysctrl.h6
-rw-r--r--include/linux/mfd/dbx500-prcmu.h10
-rw-r--r--include/linux/platform_data/clk-ux500.h17
-rw-r--r--include/linux/platform_data/media/ir-rx51.h3
-rw-r--r--include/linux/qcom_scm.h8
-rw-r--r--include/linux/reset-controller.h4
-rw-r--r--include/linux/reset.h4
-rw-r--r--include/linux/scpi_protocol.h2
-rw-r--r--include/linux/soc/qcom/wcnss_ctrl.h8
-rw-r--r--include/soc/tegra/cpuidle.h2
-rw-r--r--sound/soc/codecs/ab8500-codec.c33
140 files changed, 4776 insertions, 2641 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt
index 313dabdc14f9..faa4b44572e3 100644
--- a/Documentation/devicetree/bindings/arm/arm,scpi.txt
+++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt
@@ -87,10 +87,33 @@ Required properties:
implementation for the IDs to use. For Juno
R0 and Juno R1 refer to [3].
+Power domain bindings for the power domains based on SCPI Message Protocol
+------------------------------------------------------------
+
+This binding uses the generic power domain binding[4].
+
+PM domain providers
+===================
+
+Required properties:
+ - #power-domain-cells : Should be 1. Contains the device or the power
+ domain ID value used by SCPI commands.
+ - num-domains: Total number of power domains provided by SCPI. This is
+ needed as the SCPI message protocol lacks a mechanism to
+ query this information at runtime.
+
+PM domain consumers
+===================
+
+Required properties:
+ - power-domains : A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle.
+
[0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/thermal/thermal.txt
[3] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/apas03s22.html
+[4] Documentation/devicetree/bindings/power/power_domain.txt
Example:
@@ -144,6 +167,12 @@ scpi_protocol: scpi@2e000000 {
compatible = "arm,scpi-sensors";
#thermal-sensor-cells = <1>;
};
+
+ scpi_devpd: scpi-power-domains {
+ compatible = "arm,scpi-power-domains";
+ num-domains = <2>;
+ #power-domain-cells = <1>;
+ };
};
cpu@0 {
@@ -156,6 +185,7 @@ hdlcd@7ff60000 {
...
reg = <0 0x7ff60000 0 0x1000>;
clocks = <&scpi_clk 4>;
+ power-domains = <&scpi_devpd 1>;
};
thermal-zones {
@@ -186,3 +216,7 @@ The thermal-sensors property in the soc_thermal node uses the
temperature sensor provided by SCP firmware to setup a thermal
zone. The ID "3" is the sensor identifier for the temperature sensor
as used by the firmware.
+
+The num-domains property in scpi-power-domains domain specifies that
+SCPI provides 2 power domains. The hdlcd node uses the power domain with
+domain ID 1.
diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt
new file mode 100644
index 000000000000..7ff13be1750b
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt
@@ -0,0 +1,45 @@
+NVIDIA Tegra ACONNECT Bus
+
+The Tegra ACONNECT bus is an AXI switch which is used to connnect various
+components inside the Audio Processing Engine (APE). All CPU accesses to
+the APE subsystem go through the ACONNECT via an APB to AXI wrapper.
+
+Required properties:
+- compatible: Must be "nvidia,tegra210-aconnect".
+- clocks: Must contain the entries for the APE clock (TEGRA210_CLK_APE),
+ and APE interface clock (TEGRA210_CLK_APB2APE).
+- clock-names: Must contain the names "ape" and "apb2ape" for the corresponding
+ 'clocks' entries.
+- power-domains: Must contain a phandle that points to the audio powergate
+ (namely 'aud') for Tegra210.
+- #address-cells: The number of cells used to represent physical base addresses
+ in the aconnect address space. Should be 1.
+- #size-cells: The number of cells used to represent the size of an address
+ range in the aconnect address space. Should be 1.
+- ranges: Mapping of the aconnect address space to the CPU address space.
+
+All devices accessed via the ACONNNECT are described by child-nodes.
+
+Example:
+
+ aconnect@702c0000 {
+ compatible = "nvidia,tegra210-aconnect";
+ clocks = <&tegra_car TEGRA210_CLK_APE>,
+ <&tegra_car TEGRA210_CLK_APB2APE>;
+ clock-names = "ape", "apb2ape";
+ power-domains = <&pd_audio>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x702c0000 0x0 0x702c0000 0x00040000>;
+
+ status = "disabled";
+
+ child1 {
+ ...
+ };
+
+ child2 {
+ ...
+ };
+ };
diff --git a/Documentation/devicetree/bindings/clock/clps711x-clock.txt b/Documentation/devicetree/bindings/clock/clps711x-clock.txt
index ce5a7476f05d..f1bd53f79d91 100644
--- a/Documentation/devicetree/bindings/clock/clps711x-clock.txt
+++ b/Documentation/devicetree/bindings/clock/clps711x-clock.txt
@@ -1,7 +1,7 @@
* Clock bindings for the Cirrus Logic CLPS711X CPUs
Required properties:
-- compatible : Shall contain "cirrus,clps711x-clk".
+- compatible : Shall contain "cirrus,ep7209-clk".
- reg : Address of the internal register set.
- startup-frequency: Factory set CPU startup frequency in HZ.
- #clock-cells : Should be <1>.
@@ -13,7 +13,7 @@ for the full list of CLPS711X clock IDs.
Example:
clks: clks@80000000 {
#clock-cells = <1>;
- compatible = "cirrus,ep7312-clk", "cirrus,clps711x-clk";
+ compatible = "cirrus,ep7312-clk", "cirrus,ep7209-clk";
reg = <0x80000000 0xc000>;
startup-frequency = <73728000>;
};
diff --git a/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt b/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt
index d685be898d0c..e9c65746e2f1 100644
--- a/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt
+++ b/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt
@@ -1,7 +1,7 @@
* Currus Logic CLPS711X Framebuffer
Required properties:
-- compatible: Shall contain "cirrus,clps711x-fb".
+- compatible: Shall contain "cirrus,ep7209-fb".
- reg : Physical base address and length of the controller's registers +
location and size of the framebuffer memory.
- clocks : phandle + clock specifier pair of the FB reference clock.
@@ -18,7 +18,7 @@ Optional properties:
Example:
fb: fb@800002c0 {
- compatible = "cirrus,ep7312-fb", "cirrus,clps711x-fb";
+ compatible = "cirrus,ep7312-fb", "cirrus,ep7209-fb";
reg = <0x800002c0 0xd44>, <0x60000000 0xc000>;
clocks = <&clks 2>;
lcd-supply = <&reg5v0>;
diff --git a/Documentation/devicetree/bindings/input/clps711x-keypad.txt b/Documentation/devicetree/bindings/input/clps711x-keypad.txt
index e68d2bbc6c07..3eed8819d05d 100644
--- a/Documentation/devicetree/bindings/input/clps711x-keypad.txt
+++ b/Documentation/devicetree/bindings/input/clps711x-keypad.txt
@@ -1,7 +1,7 @@
* Cirrus Logic CLPS711X matrix keypad device tree bindings
Required Properties:
-- compatible: Shall contain "cirrus,clps711x-keypad".
+- compatible: Shall contain "cirrus,ep7209-keypad".
- row-gpios: List of GPIOs used as row lines.
- poll-interval: Poll interval time in milliseconds.
- linux,keymap: The definition can be found at
@@ -12,7 +12,7 @@ Optional Properties:
Example:
keypad {
- compatible = "cirrus,ep7312-keypad", "cirrus,clps711x-keypad";
+ compatible = "cirrus,ep7312-keypad", "cirrus,ep7209-keypad";
autorepeat;
poll-interval = <120>;
row-gpios = <&porta 0 0>,
diff --git a/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt
index 759339c34e4f..969b4582ec60 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt
@@ -2,7 +2,7 @@ Cirrus Logic CLPS711X Interrupt Controller
Required properties:
-- compatible: Should be "cirrus,clps711x-intc".
+- compatible: Should be "cirrus,ep7209-intc".
- reg: Specifies base physical address of the registers set.
- interrupt-controller: Identifies the node as an interrupt controller.
- #interrupt-cells: Specifies the number of cells needed to encode an
@@ -34,7 +34,7 @@ ID Name Description
Example:
intc: interrupt-controller {
- compatible = "cirrus,clps711x-intc";
+ compatible = "cirrus,ep7312-intc", "cirrus,ep7209-intc";
reg = <0x80000000 0x4000>;
interrupt-controller;
#interrupt-cells = <1>;
diff --git a/Documentation/devicetree/bindings/media/nokia,n900-ir b/Documentation/devicetree/bindings/media/nokia,n900-ir
new file mode 100644
index 000000000000..13a18ce37dd1
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nokia,n900-ir
@@ -0,0 +1,20 @@
+Device-Tree bindings for LIRC TX driver for Nokia N900(RX51)
+
+Required properties:
+ - compatible: should be "nokia,n900-ir".
+ - pwms: specifies PWM used for IR signal transmission.
+
+Example node:
+
+ pwm9: dmtimer-pwm@9 {
+ compatible = "ti,omap-dmtimer-pwm";
+ ti,timers = <&timer9>;
+ ti,clock-source = <0x00>; /* timer_sys_ck */
+ #pwm-cells = <3>;
+ };
+
+ ir: n900-ir {
+ compatible = "nokia,n900-ir";
+
+ pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
+ };
diff --git a/Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt b/Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt
new file mode 100644
index 000000000000..9bb5f57e2066
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt
@@ -0,0 +1,136 @@
+* Device tree bindings for Atmel EBI
+
+The External Bus Interface (EBI) controller is a bus where you can connect
+asynchronous (NAND, NOR, SRAM, ....) and synchronous memories (SDR/DDR SDRAMs).
+The EBI provides a glue-less interface to asynchronous memories through the SMC
+(Static Memory Controller).
+
+Required properties:
+
+- compatible: "atmel,at91sam9260-ebi"
+ "atmel,at91sam9261-ebi"
+ "atmel,at91sam9263-ebi0"
+ "atmel,at91sam9263-ebi1"
+ "atmel,at91sam9rl-ebi"
+ "atmel,at91sam9g45-ebi"
+ "atmel,at91sam9x5-ebi"
+ "atmel,sama5d3-ebi"
+
+- reg: Contains offset/length value for EBI memory mapping.
+ This property might contain several entries if the EBI
+ memory range is not contiguous
+
+- #address-cells: Must be 2.
+ The first cell encodes the CS.
+ The second cell encode the offset into the CS memory
+ range.
+
+- #size-cells: Must be set to 1.
+
+- ranges: Encodes CS to memory region association.
+
+- clocks: Clock feeding the EBI controller.
+ See clock-bindings.txt
+
+Children device nodes are representing device connected to the EBI bus.
+
+Required device node properties:
+
+- reg: Contains the chip-select id, the offset and the length
+ of the memory region requested by the device.
+
+EBI bus configuration will be defined directly in the device subnode.
+
+Optional EBI/SMC properties:
+
+- atmel,smc-bus-width: width of the asynchronous device's data bus
+ 8, 16 or 32.
+ Default to 8 when undefined.
+
+- atmel,smc-byte-access-type "write" or "select" (see Atmel datasheet).
+ Default to "select" when undefined.
+
+- atmel,smc-read-mode "nrd" or "ncs".
+ Default to "ncs" when undefined.
+
+- atmel,smc-write-mode "nwe" or "ncs".
+ Default to "ncs" when undefined.
+
+- atmel,smc-exnw-mode "disabled", "frozen" or "ready".
+ Default to "disabled" when undefined.
+
+- atmel,smc-page-mode enable page mode if present. The provided value
+ defines the page size (supported values: 4, 8,
+ 16 and 32).
+
+- atmel,smc-tdf-mode: "normal" or "optimized". When set to
+ "optimized" the data float time is optimized
+ depending on the next device being accessed
+ (next device setup time is subtracted to the
+ current device data float time).
+ Default to "normal" when undefined.
+
+If at least one atmel,smc- property is defined the following SMC timing
+properties become mandatory. In the other hand, if none of the atmel,smc-
+properties are specified, we assume that the EBI bus configuration will be
+handled by the sub-device driver, and none of those properties should be
+defined.
+
+All the timings are expressed in nanoseconds (see Atmel datasheet for a full
+description).
+
+- atmel,smc-ncs-rd-setup-ns
+- atmel,smc-nrd-setup-ns
+- atmel,smc-ncs-wr-setup-ns
+- atmel,smc-nwe-setup-ns
+- atmel,smc-ncs-rd-pulse-ns
+- atmel,smc-nrd-pulse-ns
+- atmel,smc-ncs-wr-pulse-ns
+- atmel,smc-nwe-pulse-ns
+- atmel,smc-nwe-cycle-ns
+- atmel,smc-nrd-cycle-ns
+- atmel,smc-tdf-ns
+
+Example:
+
+ ebi: ebi@10000000 {
+ compatible = "atmel,sama5d3-ebi";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ atmel,smc = <&hsmc>;
+ atmel,matrix = <&matrix>;
+ reg = <0x10000000 0x10000000
+ 0x40000000 0x30000000>;
+ ranges = <0x0 0x0 0x10000000 0x10000000
+ 0x1 0x0 0x40000000 0x10000000
+ 0x2 0x0 0x50000000 0x10000000
+ 0x3 0x0 0x60000000 0x10000000>;
+ clocks = <&mck>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ebi_addr>;
+
+ nor: flash@0,0 {
+ compatible = "cfi-flash";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+
+ atmel,smc-read-mode = "nrd";
+ atmel,smc-write-mode = "nwe";
+ atmel,smc-bus-width = <16>;
+ atmel,smc-ncs-rd-setup-ns = <0>;
+ atmel,smc-ncs-wr-setup-ns = <0>;
+ atmel,smc-nwe-setup-ns = <8>;
+ atmel,smc-nrd-setup-ns = <16>;
+ atmel,smc-ncs-rd-pulse-ns = <84>;
+ atmel,smc-ncs-wr-pulse-ns = <84>;
+ atmel,smc-nrd-pulse-ns = <76>;
+ atmel,smc-nwe-pulse-ns = <76>;
+ atmel,smc-nrd-cycle-ns = <107>;
+ atmel,smc-nwe-cycle-ns = <84>;
+ atmel,smc-tdf-ns = <16>;
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/pwm/cirrus,clps711x-pwm.txt b/Documentation/devicetree/bindings/pwm/cirrus,clps711x-pwm.txt
index a183db48f910..c0b2028238d6 100644
--- a/Documentation/devicetree/bindings/pwm/cirrus,clps711x-pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/cirrus,clps711x-pwm.txt
@@ -1,15 +1,14 @@
* Cirris Logic CLPS711X PWM controller
Required properties:
-- compatible: Shall contain "cirrus,clps711x-pwm".
+- compatible: Shall contain "cirrus,ep7209-pwm".
- reg: Physical base address and length of the controller's registers.
- clocks: phandle + clock specifier pair of the PWM reference clock.
- #pwm-cells: Should be 1. The cell specifies the index of the channel.
Example:
pwm: pwm@80000400 {
- compatible = "cirrus,ep7312-pwm",
- "cirrus,clps711x-pwm";
+ compatible = "cirrus,ep7312-pwm", "cirrus,ep7209-pwm";
reg = <0x80000400 0x4>;
clocks = <&clks 8>;
#pwm-cells = <1>;
diff --git a/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt b/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt
index 5befb538db95..2e53324fb720 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt
@@ -9,6 +9,10 @@ Required properties:
Optional properties:
- ti,prescaler: Should be a value between 0 and 7, see the timers datasheet
+- ti,clock-source: Set dmtimer parent clock, values between 0 and 2:
+ - 0x00 - high-frequency system clock (timer_sys_ck)
+ - 0x01 - 32-kHz always-on clock (timer_32k_ck)
+ - 0x02 - external clock (timer_ext_ck, OMAP2 only)
Example:
pwm9: dmtimer-pwm@9 {
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt
new file mode 100644
index 000000000000..e746b631793a
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt
@@ -0,0 +1,18 @@
+Amlogic Meson SoC Reset Controller
+=======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "amlogic,meson8b-reset" or "amlogic,meson-gxbb-reset"
+- reg: should contain the register address base
+- #reset-cells: 1, see below
+
+example:
+
+reset: reset-controller {
+ compatible = "amlogic,meson-gxbb-reset";
+ reg = <0x0 0x04404 0x0 0x20>;
+ #reset-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
index e0b185a944ba..c25da39df707 100644
--- a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
+++ b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
@@ -8,7 +8,9 @@ The reset controller registers are part of the system-ctl block on
hi6220 SoC.
Required properties:
-- compatible: may be "hisilicon,hi6220-sysctrl"
+- compatible: should be one of the following:
+ - "hisilicon,hi6220-sysctrl", "syscon" : For peripheral reset controller.
+ - "hisilicon,hi6220-mediactrl", "syscon" : For media reset controller.
- reg: should be register base and length as documented in the
datasheet
- #reset-cells: 1, see below
diff --git a/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt
new file mode 100644
index 000000000000..164c7f34c451
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt
@@ -0,0 +1,91 @@
+TI SysCon Reset Controller
+=======================
+
+Almost all SoCs have hardware modules that require reset control in addition
+to clock and power control for their functionality. The reset control is
+typically provided by means of memory-mapped I/O registers. These registers are
+sometimes a part of a larger register space region implementing various
+functionalities. This register range is best represented as a syscon node to
+allow multiple entities to access their relevant registers in the common
+register space.
+
+A SysCon Reset Controller node defines a device that uses a syscon node
+and provides reset management functionality for various hardware modules
+present on the SoC.
+
+SysCon Reset Controller Node
+============================
+Each of the reset provider/controller nodes should be a child of a syscon
+node and have the following properties.
+
+Required properties:
+--------------------
+ - compatible : Should be,
+ "ti,k2e-pscrst"
+ "ti,k2l-pscrst"
+ "ti,k2hk-pscrst"
+ "ti,syscon-reset"
+ - #reset-cells : Should be 1. Please see the reset consumer node below
+ for usage details
+ - ti,reset-bits : Contains the reset control register information
+ Should contain 7 cells for each reset exposed to
+ consumers, defined as:
+ Cell #1 : offset of the reset assert control
+ register from the syscon register base
+ Cell #2 : bit position of the reset in the reset
+ assert control register
+ Cell #3 : offset of the reset deassert control
+ register from the syscon register base
+ Cell #4 : bit position of the reset in the reset
+ deassert control register
+ Cell #5 : offset of the reset status register
+ from the syscon register base
+ Cell #6 : bit position of the reset in the
+ reset status register
+ Cell #7 : Flags used to control reset behavior,
+ availible flags defined in the DT include
+ file <dt-bindings/reset/ti-syscon.h>
+
+SysCon Reset Consumer Nodes
+===========================
+Each of the reset consumer nodes should have the following properties,
+in addition to their own properties.
+
+Required properties:
+--------------------
+ - resets : A phandle to the reset controller node and an index number
+ to a reset specifier as defined above.
+
+Please also refer to Documentation/devicetree/bindings/reset/reset.txt for
+common reset controller usage by consumers.
+
+Example:
+--------
+The following example demonstrates a syscon node, the reset controller node
+using the syscon node, and a consumer (a DSP device) on the TI Keystone 2
+Edison SoC.
+
+/ {
+ soc {
+ psc: power-sleep-controller@02350000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x02350000 0x1000>;
+
+ pscrst: psc-reset {
+ compatible = "ti,k2e-pscrst", "ti,syscon-reset";
+ #reset-cells = <1>;
+
+ ti,reset-bits = <
+ 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_SET|DEASSERT_CLEAR|STATUS_SET) /* 0: pcrst-dsp0 */
+ 0xa40 5 0xa44 3 0 0 (ASSERT_SET|DEASSERT_CLEAR|STATUS_NONE) /* 1: pcrst-example */
+ >;
+ };
+ };
+
+ dsp0: dsp0 {
+ ...
+ resets = <&pscrst 0>;
+ ...
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt
index caaeb2583579..07013fa60a48 100644
--- a/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt
+++ b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt
@@ -1,7 +1,7 @@
* Cirrus Logic CLPS711X Universal Asynchronous Receiver/Transmitter (UART)
Required properties:
-- compatible: Should be "cirrus,clps711x-uart".
+- compatible: Should be "cirrus,ep7209-uart".
- reg: Address and length of the register set for the device.
- interrupts: Should contain UART TX and RX interrupt.
- clocks: Should contain UART core clock number.
@@ -20,7 +20,7 @@ Example:
};
uart1: uart@80000480 {
- compatible = "cirrus,clps711x-uart";
+ compatible = "cirrus,ep7312-uart","cirrus,ep7209-uart";
reg = <0x80000480 0x80>;
interrupts = <12 13>;
clocks = <&clks 11>;
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt
index 5cc82b8353d8..af9ca37221ce 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt
@@ -68,7 +68,7 @@ important.
Value type: <u32>
Definition: must be 2 - denoting the bit in the entry and IRQ flags
-- #qcom,state-cells:
+- #qcom,smem-state-cells:
Usage: required for outgoing entries
Value type: <u32>
Definition: must be 1 - denoting the bit in the entry
@@ -92,7 +92,7 @@ wcnss-smp2p {
wcnss_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
- #qcom,state-cells = <1>;
+ #qcom,smem-state-cells = <1>;
};
wcnss_smp2p_in: slave-kernel {
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt
index a6634c70850d..2993b5a97dd6 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt
@@ -51,7 +51,7 @@ important.
Definition: specifies the offset, in words, of the first bit for this
entry
-- #qcom,state-cells:
+- #qcom,smem-state-cells:
Usage: required for local entry
Value type: <u32>
Definition: must be 1 - denotes bit number
@@ -91,7 +91,7 @@ smsm {
apps_smsm: apps@0 {
reg = <0>;
- #qcom,state-cells = <1>;
+ #qcom,smem-state-cells = <1>;
};
wcnss_smsm: wcnss@7 {
diff --git a/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt b/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt
index cd55b52548e4..d4c62e7b1714 100644
--- a/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt
+++ b/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt
@@ -1,7 +1,7 @@
* Cirrus Logic CLPS711X Timer Counter
Required properties:
-- compatible: Shall contain "cirrus,clps711x-timer".
+- compatible: Shall contain "cirrus,ep7209-timer".
- reg : Address and length of the register set.
- interrupts: The interrupt number of the timer.
- clocks : phandle of timer reference clock.
@@ -15,14 +15,14 @@ Example:
};
timer1: timer@80000300 {
- compatible = "cirrus,ep7312-timer", "cirrus,clps711x-timer";
+ compatible = "cirrus,ep7312-timer", "cirrus,ep7209-timer";
reg = <0x80000300 0x4>;
interrupts = <8>;
clocks = <&clks 5>;
};
timer2: timer@80000340 {
- compatible = "cirrus,ep7312-timer", "cirrus,clps711x-timer";
+ compatible = "cirrus,ep7312-timer", "cirrus,ep7209-timer";
reg = <0x80000340 0x4>;
interrupts = <9>;
clocks = <&clks 6>;
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index 589296bdc133..b0d775d28e97 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -352,6 +352,10 @@ REGULATOR
devm_regulator_put()
devm_regulator_register()
+RESET
+ devm_reset_control_get()
+ devm_reset_controller_register()
+
SLAVE DMA ENGINE
devm_acpi_dma_controller_register()
diff --git a/MAINTAINERS b/MAINTAINERS
index 9f5cd4df6797..5f62e4cd900c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1536,6 +1536,7 @@ M: David Brown <david.brown@linaro.org>
L: linux-arm-msm@vger.kernel.org
L: linux-soc@vger.kernel.org
S: Maintained
+F: Documentation/devicetree/bindings/soc/qcom/
F: arch/arm/boot/dts/qcom-*.dts
F: arch/arm/boot/dts/qcom-*.dtsi
F: arch/arm/mach-qcom/
@@ -1841,7 +1842,6 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://git.linaro.org/people/ulfh/clk.git
S: Maintained
F: drivers/clk/ux500/
-F: include/linux/platform_data/clk-ux500.h
ARM/VERSATILE EXPRESS PLATFORM
M: Liviu Dudau <liviu.dudau@arm.com>
diff --git a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi
new file mode 100644
index 000000000000..c4d063ae6b74
--- /dev/null
+++ b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi
@@ -0,0 +1,29 @@
+/*
+ * Samsung's Exynos SoC MFC (Video Codec) reserved memory common definition.
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mfc_left: region@51000000 {
+ compatible = "shared-dma-pool";
+ no-map;
+ reg = <0x51000000 0x800000>;
+ };
+
+ mfc_right: region@43000000 {
+ compatible = "shared-dma-pool";
+ no-map;
+ reg = <0x43000000 0x800000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index ad7394c1d67a..f5e4eb23aa21 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -18,6 +18,7 @@
#include "exynos4210.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Insignal Origen evaluation board based on Exynos4210";
@@ -288,8 +289,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 94ca7d36ab37..de917f0d907d 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -17,6 +17,7 @@
/dts-v1/;
#include "exynos4210.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Samsung smdkv310 evaluation board based on Exynos4210";
@@ -133,8 +134,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index ec7619a384a2..276ac9a7bb82 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -13,6 +13,7 @@
#include "exynos4412.dtsi"
#include "exynos4412-ppmu-common.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
chosen {
@@ -499,6 +500,11 @@
clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
};
+&mfc {
+ memory-region = <&mfc_left>, <&mfc_right>;
+ status = "okay";
+};
+
&mixer {
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 8bca699b7f20..cd363d7e4e34 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -16,6 +16,7 @@
#include "exynos4412.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Insignal Origen evaluation board based on Exynos4412";
@@ -466,8 +467,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index a51069f3c03b..9b6d561dbdac 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -14,6 +14,7 @@
/dts-v1/;
#include "exynos4412.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Samsung SMDK evaluation board based on Exynos4412";
@@ -112,8 +113,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 85dad29c08dc..39940f4bd556 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -14,6 +14,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include "exynos5250.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Insignal Arndale evaluation board based on EXYNOS5250";
@@ -516,8 +517,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index b7992b13c9de..9fac874af5eb 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -13,6 +13,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos5250.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
@@ -344,8 +345,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index ac291f540812..784130bdb6a3 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -14,6 +14,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include "exynos5250.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Google Spring";
@@ -425,8 +426,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 60bc861d0f9d..b8b5f3ae2942 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -16,6 +16,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/clock/samsung,s2mps11.h>
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
@@ -347,8 +348,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 1de972d46a87..6b6766e3d90a 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -16,6 +16,7 @@
#include <dt-bindings/regulator/maxim,max77802.h>
#include "exynos5420.dtsi"
#include "exynos5420-cpus.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Google Peach Pit Rev 6+";
@@ -702,8 +703,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 2e748d19322f..5206f41e548d 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -13,6 +13,7 @@
#include "exynos5420.dtsi"
#include "exynos5420-cpus.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Samsung SMDK5420 board based on EXYNOS5420";
@@ -355,8 +356,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 2a4e10bc8801..7c2335f18bfc 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -17,6 +17,7 @@
#include "exynos5800.dtsi"
#include "exynos5422-cpus.dtsi"
#include "exynos5422-cpu-thermal.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
memory {
@@ -406,8 +407,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 62ceb89e073f..1f735963ca98 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -16,6 +16,7 @@
#include <dt-bindings/regulator/maxim,max77802.h>
#include "exynos5800.dtsi"
#include "exynos5420-cpus.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Google Peach Pi Rev 10+";
@@ -670,8 +671,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index ecf139f31c4c..8f820de890b4 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -18,6 +18,7 @@ menuconfig ARCH_EXYNOS
select EXYNOS_THERMAL
select EXYNOS_PMU
select EXYNOS_SROM
+ select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
select GPIOLIB
select HAVE_ARM_SCU if SMP
select HAVE_S3C2410_I2C if I2C
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 34d29df3e006..9ea6c54645ad 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_ARCH_EXYNOS) += exynos.o exynos-smc.o firmware.o
obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o sleep.o
obj-$(CONFIG_PM_SLEEP) += suspend.o
-obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
@@ -23,5 +22,3 @@ AFLAGS_sleep.o :=-Wa,-march=armv7-a$(plus_sec)
obj-$(CONFIG_EXYNOS5420_MCPM) += mcpm-exynos.o
CFLAGS_mcpm-exynos.o += -march=armv7-a
-
-obj-$(CONFIG_S5P_DEV_MFC) += s5p-dev-mfc.o
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index ecbfa5dd3c54..acabf0bffc5d 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -27,7 +27,6 @@
#include <plat/cpu.h>
#include "common.h"
-#include "mfc.h"
static struct map_desc exynos4_iodesc[] __initdata = {
{
@@ -235,23 +234,6 @@ static char const *const exynos_dt_compat[] __initconst = {
NULL
};
-static void __init exynos_reserve(void)
-{
-#ifdef CONFIG_S5P_DEV_MFC
- int i;
- char *mfc_mem[] = {
- "samsung,mfc-v5",
- "samsung,mfc-v6",
- "samsung,mfc-v7",
- "samsung,mfc-v8",
- };
-
- for (i = 0; i < ARRAY_SIZE(mfc_mem); i++)
- if (of_scan_flat_dt(s5p_fdt_alloc_mfc_mem, mfc_mem[i]))
- break;
-#endif
-}
-
static void __init exynos_dt_fixup(void)
{
/*
@@ -273,6 +255,5 @@ DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
.init_machine = exynos_dt_machine_init,
.init_late = exynos_init_late,
.dt_compat = exynos_dt_compat,
- .reserve = exynos_reserve,
.dt_fixup = exynos_dt_fixup,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mfc.h b/arch/arm/mach-exynos/mfc.h
deleted file mode 100644
index dec93cd5b3c6..000000000000
--- a/arch/arm/mach-exynos/mfc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2013 Samsung Electronics Co.Ltd
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __MACH_EXYNOS_MFC_H
-#define __MACH_EXYNOS_MFC_H __FILE__
-
-int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname,
- int depth, void *data);
-
-#endif /* __MACH_EXYNOS_MFC_H */
diff --git a/arch/arm/mach-exynos/s5p-dev-mfc.c b/arch/arm/mach-exynos/s5p-dev-mfc.c
deleted file mode 100644
index 8ef1f3ee4e98..000000000000
--- a/arch/arm/mach-exynos/s5p-dev-mfc.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd
- *
- * Base S5P MFC resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/memblock.h>
-#include <linux/ioport.h>
-#include <linux/of_fdt.h>
-#include <linux/of.h>
-
-static struct platform_device s5p_device_mfc_l;
-static struct platform_device s5p_device_mfc_r;
-
-struct s5p_mfc_dt_meminfo {
- unsigned long loff;
- unsigned long lsize;
- unsigned long roff;
- unsigned long rsize;
- char *compatible;
-};
-
-struct s5p_mfc_reserved_mem {
- phys_addr_t base;
- unsigned long size;
- struct device *dev;
-};
-
-static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata;
-
-
-static void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
- phys_addr_t lbase, unsigned int lsize)
-{
- int i;
-
- s5p_mfc_mem[0].dev = &s5p_device_mfc_r.dev;
- s5p_mfc_mem[0].base = rbase;
- s5p_mfc_mem[0].size = rsize;
-
- s5p_mfc_mem[1].dev = &s5p_device_mfc_l.dev;
- s5p_mfc_mem[1].base = lbase;
- s5p_mfc_mem[1].size = lsize;
-
- for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
- struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
- if (memblock_remove(area->base, area->size)) {
- printk(KERN_ERR "Failed to reserve memory for MFC device (%ld bytes at 0x%08lx)\n",
- area->size, (unsigned long) area->base);
- area->base = 0;
- }
- }
-}
-
-int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname,
- int depth, void *data)
-{
- const __be32 *prop;
- int len;
- struct s5p_mfc_dt_meminfo mfc_mem;
-
- if (!data)
- return 0;
-
- if (!of_flat_dt_is_compatible(node, data))
- return 0;
-
- prop = of_get_flat_dt_prop(node, "samsung,mfc-l", &len);
- if (!prop || (len != 2 * sizeof(unsigned long)))
- return 0;
-
- mfc_mem.loff = be32_to_cpu(prop[0]);
- mfc_mem.lsize = be32_to_cpu(prop[1]);
-
- prop = of_get_flat_dt_prop(node, "samsung,mfc-r", &len);
- if (!prop || (len != 2 * sizeof(unsigned long)))
- return 0;
-
- mfc_mem.roff = be32_to_cpu(prop[0]);
- mfc_mem.rsize = be32_to_cpu(prop[1]);
-
- s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize,
- mfc_mem.loff, mfc_mem.lsize);
-
- return 1;
-}
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 9a7073949d1d..a5ab712c1a59 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -1242,11 +1242,6 @@ static struct pwm_omap_dmtimer_pdata __maybe_unused pwm_dmtimer_pdata = {
#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
static struct lirc_rx51_platform_data rx51_lirc_data = {
.set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
- .pwm_timer = 9, /* Use GPT 9 for CIR */
-#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
- .dmtimer = &pwm_dmtimer_pdata,
-#endif
-
};
static struct platform_device rx51_lirc_device = {
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index ab2b2b2b90e5..05e20aaf68dd 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -274,8 +274,6 @@ static struct platform_device omap3_rom_rng_device = {
},
};
-static struct platform_device rx51_lirc_device;
-
static void __init nokia_n900_legacy_init(void)
{
hsmmc2_internal_input_clk();
@@ -294,10 +292,7 @@ static void __init nokia_n900_legacy_init(void)
pr_info("RX-51: Registering OMAP3 HWRNG device\n");
platform_device_register(&omap3_rom_rng_device);
-
}
-
- platform_device_register(&rx51_lirc_device);
}
static void __init omap3_tao3530_legacy_init(void)
@@ -492,10 +487,6 @@ static struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = {
static struct lirc_rx51_platform_data __maybe_unused rx51_lirc_data = {
.set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
- .pwm_timer = 9, /* Use GPT 9 for CIR */
-#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
- .dmtimer = &pwm_dmtimer_pdata,
-#endif
};
static struct platform_device __maybe_unused rx51_lirc_device = {
@@ -543,6 +534,7 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
&omap3_iommu_pdata),
OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x4809c000, "4809c000.mmc", &mmc_pdata[0]),
OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x480b4000, "480b4000.mmc", &mmc_pdata[1]),
+ OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_lirc_data),
/* Only on am3517 */
OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index edfff1ae1f8d..56d0eb6e254e 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -2,11 +2,9 @@
# Makefile for the linux kernel, U8500 machine.
#
-obj-y := cpu.o id.o pm.o
-obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
+obj-y := pm.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o
-obj-$(CONFIG_MACH_MOP500) += board-mop500-regulators.o \
- board-mop500-audio.o
+obj-$(CONFIG_MACH_MOP500) += board-mop500-audio.o
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
deleted file mode 100644
index 32d744e91ec2..000000000000
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ /dev/null
@@ -1,1065 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- *
- * Authors: Sundar Iyer <sundar.iyer@stericsson.com>
- * Bengt Jonsson <bengt.g.jonsson@stericsson.com>
- * Daniel Willerud <daniel.willerud@stericsson.com>
- *
- * MOP500 board specific initialization for regulators
- */
-#include <linux/kernel.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/ab8500.h>
-#include "board-mop500-regulators.h"
-#include "id.h"
-
-static struct regulator_consumer_supply gpio_en_3v3_consumers[] = {
- REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-struct regulator_init_data gpio_en_3v3_regulator = {
- .constraints = {
- .name = "EN-3V3",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(gpio_en_3v3_consumers),
- .consumer_supplies = gpio_en_3v3_consumers,
-};
-
-/*
- * TPS61052 regulator
- */
-static struct regulator_consumer_supply tps61052_vaudio_consumers[] = {
- /*
- * Boost converter supply to raise voltage on audio speaker, this
- * is actually connected to three pins, VInVhfL (left amplifier)
- * VInVhfR (right amplifier) and VIntDClassInt - all three must
- * be connected to the same voltage.
- */
- REGULATOR_SUPPLY("vintdclassint", "ab8500-codec.0"),
-};
-
-struct regulator_init_data tps61052_regulator = {
- .constraints = {
- .name = "vaudio-hf",
- .min_uV = 4500000,
- .max_uV = 4500000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(tps61052_vaudio_consumers),
- .consumer_supplies = tps61052_vaudio_consumers,
-};
-
-static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
- /* Main display, u8500 R3 uib */
- REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"),
- /* Main display, u8500 uib and ST uib */
- REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.0"),
- /* Secondary display, ST uib */
- REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.1"),
- /* SFH7741 proximity sensor */
- REGULATOR_SUPPLY("vcc", "gpio-keys.0"),
- /* BH1780GLS ambient light sensor */
- REGULATOR_SUPPLY("vcc", "2-0029"),
- /* lsm303dlh accelerometer */
- REGULATOR_SUPPLY("vdd", "2-0018"),
- /* lsm303dlhc accelerometer */
- REGULATOR_SUPPLY("vdd", "2-0019"),
- /* lsm303dlh magnetometer */
- REGULATOR_SUPPLY("vdd", "2-001e"),
- /* Rohm BU21013 Touchscreen devices */
- REGULATOR_SUPPLY("avdd", "3-005c"),
- REGULATOR_SUPPLY("avdd", "3-005d"),
- /* Synaptics RMI4 Touchscreen device */
- REGULATOR_SUPPLY("vdd", "3-004b"),
- /* L3G4200D Gyroscope device */
- REGULATOR_SUPPLY("vdd", "2-0068"),
- /* Ambient light sensor device */
- REGULATOR_SUPPLY("vdd", "3-0029"),
- /* Pressure sensor device */
- REGULATOR_SUPPLY("vdd", "2-005c"),
- /* Cypress TrueTouch Touchscreen device */
- REGULATOR_SUPPLY("vcpin", "spi8.0"),
- /* Camera device */
- REGULATOR_SUPPLY("vaux12v5", "mmio_camera"),
-};
-
-static struct regulator_consumer_supply ab8500_vaux2_consumers[] = {
- /* On-board eMMC power */
- REGULATOR_SUPPLY("vmmc", "sdi4"),
- /* AB8500 audio codec */
- REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"),
- /* AB8500 accessory detect 1 */
- REGULATOR_SUPPLY("vcc-N2158", "ab8500-acc-det.0"),
- /* AB8500 Tv-out device */
- REGULATOR_SUPPLY("vcc-N2158", "mcde_tv_ab8500.4"),
- /* AV8100 HDMI device */
- REGULATOR_SUPPLY("vcc-N2158", "av8100_hdmi.3"),
-};
-
-static struct regulator_consumer_supply ab8500_vaux3_consumers[] = {
- REGULATOR_SUPPLY("v-SD-STM", "stm"),
- /* External MMC slot power */
- REGULATOR_SUPPLY("vmmc", "sdi0"),
-};
-
-static struct regulator_consumer_supply ab8505_vaux4_consumers[] = {
-};
-
-static struct regulator_consumer_supply ab8505_vaux5_consumers[] = {
-};
-
-static struct regulator_consumer_supply ab8505_vaux6_consumers[] = {
-};
-
-static struct regulator_consumer_supply ab8505_vaux8_consumers[] = {
- /* AB8500 audio codec device */
- REGULATOR_SUPPLY("v-aux8", NULL),
-};
-
-static struct regulator_consumer_supply ab8505_vadc_consumers[] = {
- /* Internal general-purpose ADC */
- REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
- /* ADC for charger */
- REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
- /* TV-out DENC supply */
- REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"),
- /* Internal general-purpose ADC */
- REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
- /* ADC for charger */
- REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"),
- /* AB8500 Tv-out device */
- REGULATOR_SUPPLY("vtvout", "mcde_tv_ab8500.4"),
-};
-
-static struct regulator_consumer_supply ab8500_vaud_consumers[] = {
- /* AB8500 audio-codec main supply */
- REGULATOR_SUPPLY("vaud", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vamic1_consumers[] = {
- /* AB8500 audio-codec Mic1 supply */
- REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vamic2_consumers[] = {
- /* AB8500 audio-codec Mic2 supply */
- REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vdmic_consumers[] = {
- /* AB8500 audio-codec DMic supply */
- REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
- /* SoC core supply, no device */
- REGULATOR_SUPPLY("v-intcore", NULL),
- /* USB Transceiver */
- REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
- /* Handled by abx500 clk driver */
- REGULATOR_SUPPLY("v-intcore", "abx500-clk.0"),
-};
-
-static struct regulator_consumer_supply ab8505_usb_consumers[] = {
- /* HS USB OTG physical interface */
- REGULATOR_SUPPLY("v-ape", NULL),
-};
-
-static struct regulator_consumer_supply ab8500_vana_consumers[] = {
- /* DB8500 DSI */
- REGULATOR_SUPPLY("vdddsi1v2", "mcde"),
- REGULATOR_SUPPLY("vdddsi1v2", "b2r2_core"),
- REGULATOR_SUPPLY("vdddsi1v2", "b2r2_1_core"),
- REGULATOR_SUPPLY("vdddsi1v2", "dsilink.0"),
- REGULATOR_SUPPLY("vdddsi1v2", "dsilink.1"),
- REGULATOR_SUPPLY("vdddsi1v2", "dsilink.2"),
- /* DB8500 CSI */
- REGULATOR_SUPPLY("vddcsi1v2", "mmio_camera"),
-};
-
-/* ab8500 regulator register initialization */
-static struct ab8500_regulator_reg_init ab8500_reg_init[] = {
- /*
- * VanaRequestCtrl = HP/LP depending on VxRequest
- * VextSupply1RequestCtrl = HP/LP depending on VxRequest
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0xf0, 0x00),
- /*
- * VextSupply2RequestCtrl = HP/LP depending on VxRequest
- * VextSupply3RequestCtrl = HP/LP depending on VxRequest
- * Vaux1RequestCtrl = HP/LP depending on VxRequest
- * Vaux2RequestCtrl = HP/LP depending on VxRequest
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0xff, 0x00),
- /*
- * Vaux3RequestCtrl = HP/LP depending on VxRequest
- * SwHPReq = Control through SWValid disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x07, 0x00),
- /*
- * VanaSysClkReq1HPValid = disabled
- * Vaux1SysClkReq1HPValid = disabled
- * Vaux2SysClkReq1HPValid = disabled
- * Vaux3SysClkReq1HPValid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00),
- /*
- * VextSupply1SysClkReq1HPValid = disabled
- * VextSupply2SysClkReq1HPValid = disabled
- * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40),
- /*
- * VanaHwHPReq1Valid = disabled
- * Vaux1HwHPreq1Valid = disabled
- * Vaux2HwHPReq1Valid = disabled
- * Vaux3HwHPReqValid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0xe8, 0x00),
- /*
- * VextSupply1HwHPReq1Valid = disabled
- * VextSupply2HwHPReq1Valid = disabled
- * VextSupply3HwHPReq1Valid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x07, 0x00),
- /*
- * VanaHwHPReq2Valid = disabled
- * Vaux1HwHPReq2Valid = disabled
- * Vaux2HwHPReq2Valid = disabled
- * Vaux3HwHPReq2Valid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0xe8, 0x00),
- /*
- * VextSupply1HwHPReq2Valid = disabled
- * VextSupply2HwHPReq2Valid = disabled
- * VextSupply3HwHPReq2Valid = HWReq2 controlled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x07, 0x04),
- /*
- * VanaSwHPReqValid = disabled
- * Vaux1SwHPReqValid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0xa0, 0x00),
- /*
- * Vaux2SwHPReqValid = disabled
- * Vaux3SwHPReqValid = disabled
- * VextSupply1SwHPReqValid = disabled
- * VextSupply2SwHPReqValid = disabled
- * VextSupply3SwHPReqValid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x1f, 0x00),
- /*
- * SysClkReq2Valid1 = SysClkReq2 controlled
- * SysClkReq3Valid1 = disabled
- * SysClkReq4Valid1 = SysClkReq4 controlled
- * SysClkReq5Valid1 = disabled
- * SysClkReq6Valid1 = SysClkReq6 controlled
- * SysClkReq7Valid1 = disabled
- * SysClkReq8Valid1 = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0xfe, 0x2a),
- /*
- * SysClkReq2Valid2 = disabled
- * SysClkReq3Valid2 = disabled
- * SysClkReq4Valid2 = disabled
- * SysClkReq5Valid2 = disabled
- * SysClkReq6Valid2 = SysClkReq6 controlled
- * SysClkReq7Valid2 = disabled
- * SysClkReq8Valid2 = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0xfe, 0x20),
- /*
- * VTVoutEna = disabled
- * Vintcore12Ena = disabled
- * Vintcore12Sel = 1.25 V
- * Vintcore12LP = inactive (HP)
- * VTVoutLP = inactive (HP)
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0xfe, 0x10),
- /*
- * VaudioEna = disabled
- * VdmicEna = disabled
- * Vamic1Ena = disabled
- * Vamic2Ena = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x1e, 0x00),
- /*
- * Vamic1_dzout = high-Z when Vamic1 is disabled
- * Vamic2_dzout = high-Z when Vamic2 is disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x03, 0x00),
- /*
- * VPll = Hw controlled (NOTE! PRCMU bits)
- * VanaRegu = force off
- */
- INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x0f, 0x02),
- /*
- * VrefDDREna = disabled
- * VrefDDRSleepMode = inactive (no pulldown)
- */
- INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x03, 0x00),
- /*
- * VextSupply1Regu = force LP
- * VextSupply2Regu = force OFF
- * VextSupply3Regu = force HP (-> STBB2=LP and TPS=LP)
- * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0
- * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0
- */
- INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0xff, 0x13),
- /*
- * Vaux1Regu = force HP
- * Vaux2Regu = force off
- */
- INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x0f, 0x01),
- /*
- * Vaux3Regu = force off
- */
- INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x03, 0x00),
- /*
- * Vaux1Sel = 2.8 V
- */
- INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x0f, 0x0C),
- /*
- * Vaux2Sel = 2.9 V
- */
- INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0f, 0x0d),
- /*
- * Vaux3Sel = 2.91 V
- */
- INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07, 0x07),
- /*
- * VextSupply12LP = disabled (no LP)
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x01, 0x00),
- /*
- * Vaux1Disch = short discharge time
- * Vaux2Disch = short discharge time
- * Vaux3Disch = short discharge time
- * Vintcore12Disch = short discharge time
- * VTVoutDisch = short discharge time
- * VaudioDisch = short discharge time
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0xfc, 0x00),
- /*
- * VanaDisch = short discharge time
- * VdmicPullDownEna = pulldown disabled when Vdmic is disabled
- * VdmicDisch = short discharge time
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x16, 0x00),
-};
-
-/* AB8500 regulators */
-static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
- /* supplies to the display/camera */
- [AB8500_LDO_AUX1] = {
- .supply_regulator = "ab8500-ext-supply3",
- .constraints = {
- .name = "V-DISPLAY",
- .min_uV = 2800000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- .boot_on = 1, /* display is on at boot */
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
- .consumer_supplies = ab8500_vaux1_consumers,
- },
- /* supplies to the on-board eMMC */
- [AB8500_LDO_AUX2] = {
- .supply_regulator = "ab8500-ext-supply3",
- .constraints = {
- .name = "V-eMMC1",
- .min_uV = 1100000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers),
- .consumer_supplies = ab8500_vaux2_consumers,
- },
- /* supply for VAUX3, supplies to SDcard slots */
- [AB8500_LDO_AUX3] = {
- .supply_regulator = "ab8500-ext-supply3",
- .constraints = {
- .name = "V-MMC-SD",
- .min_uV = 1100000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers),
- .consumer_supplies = ab8500_vaux3_consumers,
- },
- /* supply for tvout, gpadc, TVOUT LDO */
- [AB8500_LDO_TVOUT] = {
- .constraints = {
- .name = "V-TVOUT",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers),
- .consumer_supplies = ab8500_vtvout_consumers,
- },
- /* supply for ab8500-vaudio, VAUDIO LDO */
- [AB8500_LDO_AUDIO] = {
- .constraints = {
- .name = "V-AUD",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers),
- .consumer_supplies = ab8500_vaud_consumers,
- },
- /* supply for v-anamic1 VAMic1-LDO */
- [AB8500_LDO_ANAMIC1] = {
- .constraints = {
- .name = "V-AMIC1",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers),
- .consumer_supplies = ab8500_vamic1_consumers,
- },
- /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
- [AB8500_LDO_ANAMIC2] = {
- .constraints = {
- .name = "V-AMIC2",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers),
- .consumer_supplies = ab8500_vamic2_consumers,
- },
- /* supply for v-dmic, VDMIC LDO */
- [AB8500_LDO_DMIC] = {
- .constraints = {
- .name = "V-DMIC",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers),
- .consumer_supplies = ab8500_vdmic_consumers,
- },
- /* supply for v-intcore12, VINTCORE12 LDO */
- [AB8500_LDO_INTCORE] = {
- .constraints = {
- .name = "V-INTCORE",
- .min_uV = 1250000,
- .max_uV = 1350000,
- .input_uV = 1800000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE |
- REGULATOR_CHANGE_DRMS,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
- .consumer_supplies = ab8500_vintcore_consumers,
- },
- /* supply for U8500 CSI-DSI, VANA LDO */
- [AB8500_LDO_ANA] = {
- .constraints = {
- .name = "V-CSI-DSI",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
- .consumer_supplies = ab8500_vana_consumers,
- },
-};
-
-/* supply for VextSupply3 */
-static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = {
- /* SIM supply for 3 V SIM cards */
- REGULATOR_SUPPLY("vinvsim", "sim-detect.0"),
-};
-
-/* extended configuration for VextSupply2, only used for HREFP_V20 boards */
-static struct ab8500_ext_regulator_cfg ab8500_ext_supply2 = {
- .hwreq = true,
-};
-
-/*
- * AB8500 external regulators
- */
-static struct regulator_init_data ab8500_ext_regulators[] = {
- /* fixed Vbat supplies VSMPS1_EXT_1V8 */
- [AB8500_EXT_SUPPLY1] = {
- .constraints = {
- .name = "ab8500-ext-supply1",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .initial_mode = REGULATOR_MODE_IDLE,
- .boot_on = 1,
- .always_on = 1,
- },
- },
- /* fixed Vbat supplies VSMPS2_EXT_1V36 and VSMPS5_EXT_1V15 */
- [AB8500_EXT_SUPPLY2] = {
- .constraints = {
- .name = "ab8500-ext-supply2",
- .min_uV = 1360000,
- .max_uV = 1360000,
- },
- },
- /* fixed Vbat supplies VSMPS3_EXT_3V4 and VSMPS4_EXT_3V4 */
- [AB8500_EXT_SUPPLY3] = {
- .constraints = {
- .name = "ab8500-ext-supply3",
- .min_uV = 3400000,
- .max_uV = 3400000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- },
- .num_consumer_supplies =
- ARRAY_SIZE(ab8500_ext_supply3_consumers),
- .consumer_supplies = ab8500_ext_supply3_consumers,
- },
-};
-
-/* ab8505 regulator register initialization */
-static struct ab8500_regulator_reg_init ab8505_reg_init[] = {
- /*
- * VarmRequestCtrl
- * VsmpsCRequestCtrl
- * VsmpsARequestCtrl
- * VsmpsBRequestCtrl
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL1, 0x00, 0x00),
- /*
- * VsafeRequestCtrl
- * VpllRequestCtrl
- * VanaRequestCtrl = HP/LP depending on VxRequest
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL2, 0x30, 0x00),
- /*
- * Vaux1RequestCtrl = HP/LP depending on VxRequest
- * Vaux2RequestCtrl = HP/LP depending on VxRequest
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL3, 0xf0, 0x00),
- /*
- * Vaux3RequestCtrl = HP/LP depending on VxRequest
- * SwHPReq = Control through SWValid disabled
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL4, 0x07, 0x00),
- /*
- * VsmpsASysClkReq1HPValid
- * VsmpsBSysClkReq1HPValid
- * VsafeSysClkReq1HPValid
- * VanaSysClkReq1HPValid = disabled
- * VpllSysClkReq1HPValid
- * Vaux1SysClkReq1HPValid = disabled
- * Vaux2SysClkReq1HPValid = disabled
- * Vaux3SysClkReq1HPValid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00),
- /*
- * VsmpsCSysClkReq1HPValid
- * VarmSysClkReq1HPValid
- * VbbSysClkReq1HPValid
- * VsmpsMSysClkReq1HPValid
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID2, 0x00, 0x00),
- /*
- * VsmpsAHwHPReq1Valid
- * VsmpsBHwHPReq1Valid
- * VsafeHwHPReq1Valid
- * VanaHwHPReq1Valid = disabled
- * VpllHwHPReq1Valid
- * Vaux1HwHPreq1Valid = disabled
- * Vaux2HwHPReq1Valid = disabled
- * Vaux3HwHPReqValid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID1, 0xe8, 0x00),
- /*
- * VsmpsMHwHPReq1Valid
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID2, 0x00, 0x00),
- /*
- * VsmpsAHwHPReq2Valid
- * VsmpsBHwHPReq2Valid
- * VsafeHwHPReq2Valid
- * VanaHwHPReq2Valid = disabled
- * VpllHwHPReq2Valid
- * Vaux1HwHPReq2Valid = disabled
- * Vaux2HwHPReq2Valid = disabled
- * Vaux3HwHPReq2Valid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID1, 0xe8, 0x00),
- /*
- * VsmpsMHwHPReq2Valid
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID2, 0x00, 0x00),
- /**
- * VsmpsCSwHPReqValid
- * VarmSwHPReqValid
- * VsmpsASwHPReqValid
- * VsmpsBSwHPReqValid
- * VsafeSwHPReqValid
- * VanaSwHPReqValid
- * VanaSwHPReqValid = disabled
- * VpllSwHPReqValid
- * Vaux1SwHPReqValid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID1, 0xa0, 0x00),
- /*
- * Vaux2SwHPReqValid = disabled
- * Vaux3SwHPReqValid = disabled
- * VsmpsMSwHPReqValid
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID2, 0x03, 0x00),
- /*
- * SysClkReq2Valid1 = SysClkReq2 controlled
- * SysClkReq3Valid1 = disabled
- * SysClkReq4Valid1 = SysClkReq4 controlled
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID1, 0x0e, 0x0a),
- /*
- * SysClkReq2Valid2 = disabled
- * SysClkReq3Valid2 = disabled
- * SysClkReq4Valid2 = disabled
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID2, 0x0e, 0x00),
- /*
- * Vaux4SwHPReqValid
- * Vaux4HwHPReq2Valid
- * Vaux4HwHPReq1Valid
- * Vaux4SysClkReq1HPValid
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUVAUX4REQVALID, 0x00, 0x00),
- /*
- * VadcEna = disabled
- * VintCore12Ena = disabled
- * VintCore12Sel = 1.25 V
- * VintCore12LP = inactive (HP)
- * VadcLP = inactive (HP)
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUMISC1, 0xfe, 0x10),
- /*
- * VaudioEna = disabled
- * Vaux8Ena = disabled
- * Vamic1Ena = disabled
- * Vamic2Ena = disabled
- */
- INIT_REGULATOR_REGISTER(AB8505_VAUDIOSUPPLY, 0x1e, 0x00),
- /*
- * Vamic1_dzout = high-Z when Vamic1 is disabled
- * Vamic2_dzout = high-Z when Vamic2 is disabled
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUCTRL1VAMIC, 0x03, 0x00),
- /*
- * VsmpsARegu
- * VsmpsASelCtrl
- * VsmpsAAutoMode
- * VsmpsAPWMMode
- */
- INIT_REGULATOR_REGISTER(AB8505_VSMPSAREGU, 0x00, 0x00),
- /*
- * VsmpsBRegu
- * VsmpsBSelCtrl
- * VsmpsBAutoMode
- * VsmpsBPWMMode
- */
- INIT_REGULATOR_REGISTER(AB8505_VSMPSBREGU, 0x00, 0x00),
- /*
- * VsafeRegu
- * VsafeSelCtrl
- * VsafeAutoMode
- * VsafePWMMode
- */
- INIT_REGULATOR_REGISTER(AB8505_VSAFEREGU, 0x00, 0x00),
- /*
- * VPll = Hw controlled (NOTE! PRCMU bits)
- * VanaRegu = force off
- */
- INIT_REGULATOR_REGISTER(AB8505_VPLLVANAREGU, 0x0f, 0x02),
- /*
- * VextSupply1Regu = force OFF (OTP_ExtSupply12LPnPolarity 1)
- * VextSupply2Regu = force OFF (OTP_ExtSupply12LPnPolarity 1)
- * VextSupply3Regu = force OFF (OTP_ExtSupply3LPnPolarity 0)
- * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0
- * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0
- */
- INIT_REGULATOR_REGISTER(AB8505_EXTSUPPLYREGU, 0xff, 0x30),
- /*
- * Vaux1Regu = force HP
- * Vaux2Regu = force off
- */
- INIT_REGULATOR_REGISTER(AB8505_VAUX12REGU, 0x0f, 0x01),
- /*
- * Vaux3Regu = force off
- */
- INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3REGU, 0x03, 0x00),
- /*
- * VsmpsASel1
- */
- INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL1, 0x00, 0x00),
- /*
- * VsmpsASel2
- */
- INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL2, 0x00, 0x00),
- /*
- * VsmpsASel3
- */
- INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL3, 0x00, 0x00),
- /*
- * VsmpsBSel1
- */
- INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL1, 0x00, 0x00),
- /*
- * VsmpsBSel2
- */
- INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL2, 0x00, 0x00),
- /*
- * VsmpsBSel3
- */
- INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL3, 0x00, 0x00),
- /*
- * VsafeSel1
- */
- INIT_REGULATOR_REGISTER(AB8505_VSAFESEL1, 0x00, 0x00),
- /*
- * VsafeSel2
- */
- INIT_REGULATOR_REGISTER(AB8505_VSAFESEL2, 0x00, 0x00),
- /*
- * VsafeSel3
- */
- INIT_REGULATOR_REGISTER(AB8505_VSAFESEL3, 0x00, 0x00),
- /*
- * Vaux1Sel = 2.8 V
- */
- INIT_REGULATOR_REGISTER(AB8505_VAUX1SEL, 0x0f, 0x0C),
- /*
- * Vaux2Sel = 2.9 V
- */
- INIT_REGULATOR_REGISTER(AB8505_VAUX2SEL, 0x0f, 0x0d),
- /*
- * Vaux3Sel = 2.91 V
- */
- INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3SEL, 0x07, 0x07),
- /*
- * Vaux4RequestCtrl
- */
- INIT_REGULATOR_REGISTER(AB8505_VAUX4REQCTRL, 0x00, 0x00),
- /*
- * Vaux4Regu
- */
- INIT_REGULATOR_REGISTER(AB8505_VAUX4REGU, 0x00, 0x00),
- /*
- * Vaux4Sel
- */
- INIT_REGULATOR_REGISTER(AB8505_VAUX4SEL, 0x00, 0x00),
- /*
- * Vaux1Disch = short discharge time
- * Vaux2Disch = short discharge time
- * Vaux3Disch = short discharge time
- * Vintcore12Disch = short discharge time
- * VTVoutDisch = short discharge time
- * VaudioDisch = short discharge time
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH, 0xfc, 0x00),
- /*
- * VanaDisch = short discharge time
- * Vaux8PullDownEna = pulldown disabled when Vaux8 is disabled
- * Vaux8Disch = short discharge time
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH2, 0x16, 0x00),
- /*
- * Vaux4Disch = short discharge time
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH3, 0x01, 0x00),
- /*
- * Vaux5Sel
- * Vaux5LP
- * Vaux5Ena
- * Vaux5Disch
- * Vaux5DisSfst
- * Vaux5DisPulld
- */
- INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX5, 0x00, 0x00),
- /*
- * Vaux6Sel
- * Vaux6LP
- * Vaux6Ena
- * Vaux6DisPulld
- */
- INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX6, 0x00, 0x00),
-};
-
-static struct regulator_init_data ab8505_regulators[AB8505_NUM_REGULATORS] = {
- /* supplies to the display/camera */
- [AB8505_LDO_AUX1] = {
- .constraints = {
- .name = "V-DISPLAY",
- .min_uV = 2800000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- .boot_on = 1, /* display is on at boot */
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
- .consumer_supplies = ab8500_vaux1_consumers,
- },
- /* supplies to the on-board eMMC */
- [AB8505_LDO_AUX2] = {
- .constraints = {
- .name = "V-eMMC1",
- .min_uV = 1100000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers),
- .consumer_supplies = ab8500_vaux2_consumers,
- },
- /* supply for VAUX3, supplies to SDcard slots */
- [AB8505_LDO_AUX3] = {
- .constraints = {
- .name = "V-MMC-SD",
- .min_uV = 1100000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers),
- .consumer_supplies = ab8500_vaux3_consumers,
- },
- /* supply for VAUX4, supplies to NFC and standalone secure element */
- [AB8505_LDO_AUX4] = {
- .constraints = {
- .name = "V-NFC-SE",
- .min_uV = 1100000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux4_consumers),
- .consumer_supplies = ab8505_vaux4_consumers,
- },
- /* supply for VAUX5, supplies to TBD */
- [AB8505_LDO_AUX5] = {
- .constraints = {
- .name = "V-AUX5",
- .min_uV = 1050000,
- .max_uV = 2790000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux5_consumers),
- .consumer_supplies = ab8505_vaux5_consumers,
- },
- /* supply for VAUX6, supplies to TBD */
- [AB8505_LDO_AUX6] = {
- .constraints = {
- .name = "V-AUX6",
- .min_uV = 1050000,
- .max_uV = 2790000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux6_consumers),
- .consumer_supplies = ab8505_vaux6_consumers,
- },
- /* supply for gpadc, ADC LDO */
- [AB8505_LDO_ADC] = {
- .constraints = {
- .name = "V-ADC",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8505_vadc_consumers),
- .consumer_supplies = ab8505_vadc_consumers,
- },
- /* supply for ab8500-vaudio, VAUDIO LDO */
- [AB8505_LDO_AUDIO] = {
- .constraints = {
- .name = "V-AUD",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers),
- .consumer_supplies = ab8500_vaud_consumers,
- },
- /* supply for v-anamic1 VAMic1-LDO */
- [AB8505_LDO_ANAMIC1] = {
- .constraints = {
- .name = "V-AMIC1",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers),
- .consumer_supplies = ab8500_vamic1_consumers,
- },
- /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
- [AB8505_LDO_ANAMIC2] = {
- .constraints = {
- .name = "V-AMIC2",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers),
- .consumer_supplies = ab8500_vamic2_consumers,
- },
- /* supply for v-aux8, VAUX8 LDO */
- [AB8505_LDO_AUX8] = {
- .constraints = {
- .name = "V-AUX8",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux8_consumers),
- .consumer_supplies = ab8505_vaux8_consumers,
- },
- /* supply for v-intcore12, VINTCORE12 LDO */
- [AB8505_LDO_INTCORE] = {
- .constraints = {
- .name = "V-INTCORE",
- .min_uV = 1250000,
- .max_uV = 1350000,
- .input_uV = 1800000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE |
- REGULATOR_CHANGE_DRMS,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
- .consumer_supplies = ab8500_vintcore_consumers,
- },
- /* supply for LDO USB */
- [AB8505_LDO_USB] = {
- .constraints = {
- .name = "V-USB",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8505_usb_consumers),
- .consumer_supplies = ab8505_usb_consumers,
- },
- /* supply for U8500 CSI-DSI, VANA LDO */
- [AB8505_LDO_ANA] = {
- .constraints = {
- .name = "V-CSI-DSI",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
- .consumer_supplies = ab8500_vana_consumers,
- },
-};
-
-struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {
- .reg_init = ab8500_reg_init,
- .num_reg_init = ARRAY_SIZE(ab8500_reg_init),
- .regulator = ab8500_regulators,
- .num_regulator = ARRAY_SIZE(ab8500_regulators),
- .ext_regulator = ab8500_ext_regulators,
- .num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators),
-};
-
-struct ab8500_regulator_platform_data ab8505_regulator_plat_data = {
- .reg_init = ab8505_reg_init,
- .num_reg_init = ARRAY_SIZE(ab8505_reg_init),
- .regulator = ab8505_regulators,
- .num_regulator = ARRAY_SIZE(ab8505_regulators),
-};
-
-static void ab8500_modify_reg_init(int id, u8 mask, u8 value)
-{
- int i;
-
- if (cpu_is_u8520()) {
- for (i = ARRAY_SIZE(ab8505_reg_init) - 1; i >= 0; i--) {
- if (ab8505_reg_init[i].id == id) {
- u8 initval = ab8505_reg_init[i].value;
- initval = (initval & ~mask) | (value & mask);
- ab8505_reg_init[i].value = initval;
-
- BUG_ON(mask & ~ab8505_reg_init[i].mask);
- return;
- }
- }
- } else {
- for (i = ARRAY_SIZE(ab8500_reg_init) - 1; i >= 0; i--) {
- if (ab8500_reg_init[i].id == id) {
- u8 initval = ab8500_reg_init[i].value;
- initval = (initval & ~mask) | (value & mask);
- ab8500_reg_init[i].value = initval;
-
- BUG_ON(mask & ~ab8500_reg_init[i].mask);
- return;
- }
- }
- }
-
- BUG_ON(1);
-}
-
-void mop500_regulator_init(void)
-{
- struct regulator_init_data *regulator;
-
- /*
- * Temporarily turn on Vaux2 on 8520 machine
- */
- if (cpu_is_u8520()) {
- /* Vaux2 initialized to be on */
- ab8500_modify_reg_init(AB8505_VAUX12REGU, 0x0f, 0x05);
- }
-
- /*
- * Handle AB8500_EXT_SUPPLY2 on HREFP_V20_V50 boards (do it for
- * all HREFP_V20 boards)
- */
- if (cpu_is_u8500v20()) {
- /* VextSupply2RequestCtrl = HP/OFF depending on VxRequest */
- ab8500_modify_reg_init(AB8500_REGUREQUESTCTRL3, 0x01, 0x01);
-
- /* VextSupply2SysClkReq1HPValid = SysClkReq1 controlled */
- ab8500_modify_reg_init(AB8500_REGUSYSCLKREQ1HPVALID2,
- 0x20, 0x20);
-
- /* VextSupply2 = force HP at initialization */
- ab8500_modify_reg_init(AB8500_EXTSUPPLYREGU, 0x0c, 0x04);
-
- /* enable VextSupply2 during platform active */
- regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2];
- regulator->constraints.always_on = 1;
-
- /* disable VextSupply2 in suspend */
- regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2];
- regulator->constraints.state_mem.disabled = 1;
- regulator->constraints.state_standby.disabled = 1;
-
- /* enable VextSupply2 HW control (used in suspend) */
- regulator->driver_data = (void *)&ab8500_ext_supply2;
- }
-}
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h
deleted file mode 100644
index 9bece38fe933..000000000000
--- a/arch/arm/mach-ux500/board-mop500-regulators.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- *
- * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
- *
- * MOP500 board specific initialization for regulators
- */
-
-#ifndef __BOARD_MOP500_REGULATORS_H
-#define __BOARD_MOP500_REGULATORS_H
-
-#include <linux/regulator/machine.h>
-#include <linux/regulator/ab8500.h>
-
-extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data;
-extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data;
-extern struct regulator_init_data tps61052_regulator;
-extern struct regulator_init_data gpio_en_3v3_regulator;
-
-void mop500_regulator_init(void);
-
-#endif
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
deleted file mode 100644
index 780bd13cd7e3..000000000000
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <asm/outercache.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include "db8500-regs.h"
-#include "id.h"
-
-static int __init ux500_l2x0_unlock(void)
-{
- int i;
- struct device_node *np;
- void __iomem *l2x0_base;
-
- np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
- l2x0_base = of_iomap(np, 0);
- of_node_put(np);
- if (!l2x0_base)
- return -ENODEV;
-
- /*
- * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
- * apparently locks both caches before jumping to the kernel. The
- * l2x0 core will not touch the unlock registers if the l2x0 is
- * already enabled, so we do it right here instead. The PL310 has
- * 8 sets of registers, one per possible CPU.
- */
- for (i = 0; i < 8; i++) {
- writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
- i * L2X0_LOCKDOWN_STRIDE);
- writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
- i * L2X0_LOCKDOWN_STRIDE);
- }
- iounmap(l2x0_base);
- return 0;
-}
-
-static void ux500_l2c310_write_sec(unsigned long val, unsigned reg)
-{
- /*
- * We can't write to secure registers as we are in non-secure
- * mode, until we have some SMI service available.
- */
-}
-
-static int __init ux500_l2x0_init(void)
-{
- /* Multiplatform guard */
- if (!((cpu_is_u8500_family() || cpu_is_ux540_family())))
- return -ENODEV;
-
- /* Unlock before init */
- ux500_l2x0_unlock();
- outer_cache.write_sec = ux500_l2c310_write_sec;
- l2x0_of_init(0, ~0);
-
- return 0;
-}
-early_initcall(ux500_l2x0_init);
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index a557955472ea..46b1da1bf5d2 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -12,41 +12,107 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
+#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/platform_data/arm-ux500-pm.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/mfd/abx500/ab8500.h>
-#include <linux/mfd/dbx500-prcmu.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/perf/arm_pmu.h>
#include <linux/regulator/machine.h>
-#include <linux/random.h>
+#include <asm/outercache.h>
+#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
#include "setup.h"
-#include "board-mop500-regulators.h"
#include "board-mop500.h"
#include "db8500-regs.h"
-#include "id.h"
-static struct ab8500_platform_data ab8500_platdata = {
- .regulator = &ab8500_regulator_plat_data,
-};
+static int __init ux500_l2x0_unlock(void)
+{
+ int i;
+ struct device_node *np;
+ void __iomem *l2x0_base;
-static struct prcmu_pdata db8500_prcmu_pdata = {
- .ab_platdata = &ab8500_platdata,
- .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET,
- .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET,
-};
+ np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
+ l2x0_base = of_iomap(np, 0);
+ of_node_put(np);
+ if (!l2x0_base)
+ return -ENODEV;
+
+ /*
+ * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
+ * apparently locks both caches before jumping to the kernel. The
+ * l2x0 core will not touch the unlock registers if the l2x0 is
+ * already enabled, so we do it right here instead. The PL310 has
+ * 8 sets of registers, one per possible CPU.
+ */
+ for (i = 0; i < 8; i++) {
+ writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
+ i * L2X0_LOCKDOWN_STRIDE);
+ writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
+ i * L2X0_LOCKDOWN_STRIDE);
+ }
+ iounmap(l2x0_base);
+ return 0;
+}
+
+static void ux500_l2c310_write_sec(unsigned long val, unsigned reg)
+{
+ /*
+ * We can't write to secure registers as we are in non-secure
+ * mode, until we have some SMI service available.
+ */
+}
-static void __init u8500_map_io(void)
+/*
+ * FIXME: Should we set up the GPIO domain here?
+ *
+ * The problem is that we cannot put the interrupt resources into the platform
+ * device until the irqdomain has been added. Right now, we set the GIC interrupt
+ * domain from init_irq(), then load the gpio driver from
+ * core_initcall(nmk_gpio_init) and add the platform devices from
+ * arch_initcall(customize_machine).
+ *
+ * This feels fragile because it depends on the gpio device getting probed
+ * _before_ any device uses the gpio interrupts.
+*/
+static void __init ux500_init_irq(void)
+{
+ struct device_node *np;
+ struct resource r;
+
+ irqchip_init();
+ np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu");
+ of_address_to_resource(np, 0, &r);
+ of_node_put(np);
+ if (!r.start) {
+ pr_err("could not find PRCMU base resource\n");
+ return;
+ }
+ prcmu_early_init(r.start, r.end-r.start);
+ ux500_pm_init(r.start, r.end-r.start);
+
+ /* Unlock before init */
+ ux500_l2x0_unlock();
+ outer_cache.write_sec = ux500_l2c310_write_sec;
+}
+
+static void ux500_restart(enum reboot_mode mode, const char *cmd)
{
- debug_ll_io_init();
- ux500_setup_id();
+ local_irq_disable();
+ local_fiq_disable();
+
+ prcmu_system_reset(0);
}
/*
@@ -73,31 +139,6 @@ static struct arm_pmu_platdata db8500_pmu_platdata = {
.handle_irq = db8500_pmu_handler,
};
-static const char *db8500_read_soc_id(void)
-{
- void __iomem *uid;
- const char *retstr;
-
- uid = ioremap(U8500_BB_UID_BASE, 0x20);
- if (!uid)
- return NULL;
- /* Throw these device-specific numbers into the entropy pool */
- add_device_randomness(uid, 0x14);
- retstr = kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
- readl((u32 *)uid+0),
- readl((u32 *)uid+1), readl((u32 *)uid+2),
- readl((u32 *)uid+3), readl((u32 *)uid+4));
- iounmap(uid);
- return retstr;
-}
-
-static struct device * __init db8500_soc_device_init(void)
-{
- const char *soc_id = db8500_read_soc_id();
-
- return ux500_soc_device_init(soc_id);
-}
-
static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
/* Requires call-back bindings. */
OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
@@ -111,8 +152,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
"ux500-msp-i2s.3", &msp3_platform_data),
/* Requires non-DT:able platform data. */
- OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
- &db8500_prcmu_pdata),
+ OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL),
OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL),
OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL),
OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0",
@@ -121,8 +161,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
};
static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = {
- OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
- &db8500_prcmu_pdata),
+ OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL),
{},
};
@@ -136,15 +175,13 @@ static const struct of_device_id u8500_local_bus_nodes[] = {
static void __init u8500_init_machine(void)
{
- struct device *parent = db8500_soc_device_init();
-
/* automatically probe child nodes of dbx5x0 devices */
if (of_machine_is_compatible("st-ericsson,u8540"))
of_platform_populate(NULL, u8500_local_bus_nodes,
- u8540_auxdata_lookup, parent);
+ u8540_auxdata_lookup, NULL);
else
of_platform_populate(NULL, u8500_local_bus_nodes,
- u8500_auxdata_lookup, parent);
+ u8500_auxdata_lookup, NULL);
}
static const char * stericsson_dt_platform_compat[] = {
@@ -156,10 +193,10 @@ static const char * stericsson_dt_platform_compat[] = {
};
DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
- .map_io = u8500_map_io,
+ .l2c_aux_val = 0,
+ .l2c_aux_mask = ~0,
.init_irq = ux500_init_irq,
.init_machine = u8500_init_machine,
- .init_late = NULL,
.dt_compat = stericsson_dt_platform_compat,
.restart = ux500_restart,
MACHINE_END
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
deleted file mode 100644
index 82156cbc22ce..000000000000
--- a/arch/arm/mach-ux500/cpu.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/mfd/dbx500-prcmu.h>
-#include <linux/sys_soc.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/stat.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_address.h>
-#include <linux/irq.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/clk-ux500.h>
-#include <linux/platform_data/arm-ux500-pm.h>
-
-#include <asm/mach/map.h>
-
-#include "setup.h"
-
-#include "board-mop500.h"
-#include "db8500-regs.h"
-#include "id.h"
-
-void ux500_restart(enum reboot_mode mode, const char *cmd)
-{
- local_irq_disable();
- local_fiq_disable();
-
- prcmu_system_reset(0);
-}
-
-/*
- * FIXME: Should we set up the GPIO domain here?
- *
- * The problem is that we cannot put the interrupt resources into the platform
- * device until the irqdomain has been added. Right now, we set the GIC interrupt
- * domain from init_irq(), then load the gpio driver from
- * core_initcall(nmk_gpio_init) and add the platform devices from
- * arch_initcall(customize_machine).
- *
- * This feels fragile because it depends on the gpio device getting probed
- * _before_ any device uses the gpio interrupts.
-*/
-void __init ux500_init_irq(void)
-{
- struct device_node *np;
- struct resource r;
-
- irqchip_init();
- np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu");
- of_address_to_resource(np, 0, &r);
- of_node_put(np);
- if (!r.start) {
- pr_err("could not find PRCMU base resource\n");
- return;
- }
- prcmu_early_init(r.start, r.end-r.start);
- ux500_pm_init(r.start, r.end-r.start);
-
- /*
- * Init clocks here so that they are available for system timer
- * initialization.
- */
- if (cpu_is_u8500_family())
- u8500_clk_init();
- else if (cpu_is_u9540())
- u9540_clk_init();
- else if (cpu_is_u8540())
- u8540_clk_init();
-}
-
-static const char * __init ux500_get_machine(void)
-{
- return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber());
-}
-
-static const char * __init ux500_get_family(void)
-{
- return kasprintf(GFP_KERNEL, "ux500");
-}
-
-static const char * __init ux500_get_revision(void)
-{
- unsigned int rev = dbx500_revision();
-
- if (rev == 0x01)
- return kasprintf(GFP_KERNEL, "%s", "ED");
- else if (rev >= 0xA0)
- return kasprintf(GFP_KERNEL, "%d.%d",
- (rev >> 4) - 0xA + 1, rev & 0xf);
-
- return kasprintf(GFP_KERNEL, "%s", "Unknown");
-}
-
-static ssize_t ux500_get_process(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- if (dbx500_id.process == 0x00)
- return sprintf(buf, "Standard\n");
-
- return sprintf(buf, "%02xnm\n", dbx500_id.process);
-}
-
-static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr,
- const char *soc_id)
-{
- soc_dev_attr->soc_id = soc_id;
- soc_dev_attr->machine = ux500_get_machine();
- soc_dev_attr->family = ux500_get_family();
- soc_dev_attr->revision = ux500_get_revision();
-}
-
-static const struct device_attribute ux500_soc_attr =
- __ATTR(process, S_IRUGO, ux500_get_process, NULL);
-
-struct device * __init ux500_soc_device_init(const char *soc_id)
-{
- struct device *parent;
- struct soc_device *soc_dev;
- struct soc_device_attribute *soc_dev_attr;
-
- soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
- if (!soc_dev_attr)
- return ERR_PTR(-ENOMEM);
-
- soc_info_populate(soc_dev_attr, soc_id);
-
- soc_dev = soc_device_register(soc_dev_attr);
- if (IS_ERR(soc_dev)) {
- kfree(soc_dev_attr);
- return NULL;
- }
-
- parent = soc_device_to_device(soc_dev);
- device_create_file(parent, &ux500_soc_attr);
-
- return parent;
-}
diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c
deleted file mode 100644
index 1e81e990044b..000000000000
--- a/arch/arm/mach-ux500/id.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/cputype.h>
-#include <asm/tlbflush.h>
-#include <asm/cacheflush.h>
-#include <asm/mach/map.h>
-
-#include "setup.h"
-
-#include "db8500-regs.h"
-#include "id.h"
-
-struct dbx500_asic_id dbx500_id;
-
-static unsigned int __init ux500_read_asicid(phys_addr_t addr)
-{
- phys_addr_t base = addr & ~0xfff;
- struct map_desc desc = {
- .virtual = (unsigned long)UX500_VIRT_ROM,
- .pfn = __phys_to_pfn(base),
- .length = SZ_16K,
- .type = MT_DEVICE,
- };
-
- iotable_init(&desc, 1);
-
- /* As in devicemaps_init() */
- local_flush_tlb_all();
- flush_cache_all();
-
- return readl(UX500_VIRT_ROM + (addr & 0xfff));
-}
-
-static void ux500_print_soc_info(unsigned int asicid)
-{
- unsigned int rev = dbx500_revision();
-
- pr_info("DB%4x ", dbx500_partnumber());
-
- if (rev == 0x01)
- pr_cont("Early Drop");
- else if (rev >= 0xA0)
- pr_cont("v%d.%d" , (rev >> 4) - 0xA + 1, rev & 0xf);
- else
- pr_cont("Unknown");
-
- pr_cont(" [%#010x]\n", asicid);
-}
-
-static unsigned int partnumber(unsigned int asicid)
-{
- return (asicid >> 8) & 0xffff;
-}
-
-/*
- * SOC MIDR ASICID ADDRESS ASICID VALUE
- * DB8500ed 0x410fc090 0x9001FFF4 0x00850001
- * DB8500v1 0x411fc091 0x9001FFF4 0x008500A0
- * DB8500v1.1 0x411fc091 0x9001FFF4 0x008500A1
- * DB8500v2 0x412fc091 0x9001DBF4 0x008500B0
- * DB8520v2.2 0x412fc091 0x9001DBF4 0x008500B2
- * DB5500v1 0x412fc091 0x9001FFF4 0x005500A0
- * DB9540 0x413fc090 0xFFFFDBF4 0x009540xx
- */
-
-void __init ux500_setup_id(void)
-{
- unsigned int cpuid = read_cpuid_id();
- unsigned int asicid = 0;
- phys_addr_t addr = 0;
-
- switch (cpuid) {
- case 0x410fc090: /* DB8500ed */
- case 0x411fc091: /* DB8500v1 */
- addr = 0x9001FFF4;
- break;
-
- case 0x412fc091: /* DB8520 / DB8500v2 / DB5500v1 */
- asicid = ux500_read_asicid(0x9001DBF4);
- if (partnumber(asicid) == 0x8500 ||
- partnumber(asicid) == 0x8520)
- /* DB8500v2 */
- break;
-
- /* DB5500v1 */
- addr = 0x9001FFF4;
- break;
-
- case 0x413fc090: /* DB9540 */
- addr = 0xFFFFDBF4;
- break;
- }
-
- if (addr)
- asicid = ux500_read_asicid(addr);
-
- if (!asicid) {
- pr_err("Unable to identify SoC\n");
- ux500_unknown_soc();
- }
-
- dbx500_id.process = asicid >> 24;
- dbx500_id.partnumber = partnumber(asicid);
- dbx500_id.revision = asicid & 0xff;
-
- ux500_print_soc_info(asicid);
-}
diff --git a/arch/arm/mach-ux500/id.h b/arch/arm/mach-ux500/id.h
deleted file mode 100644
index bcc58a8cccbc..000000000000
--- a/arch/arm/mach-ux500/id.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_UX500_ID
-#define __MACH_UX500_ID
-
-/**
- * struct dbx500_asic_id - fields of the ASIC ID
- * @process: the manufacturing process, 0x40 is 40 nm 0x00 is "standard"
- * @partnumber: hithereto 0x8500 for DB8500
- * @revision: version code in the series
- */
-struct dbx500_asic_id {
- u16 partnumber;
- u8 revision;
- u8 process;
-};
-
-extern struct dbx500_asic_id dbx500_id;
-
-static inline unsigned int __attribute_const__ dbx500_partnumber(void)
-{
- return dbx500_id.partnumber;
-}
-
-static inline unsigned int __attribute_const__ dbx500_revision(void)
-{
- return dbx500_id.revision;
-}
-
-/*
- * SOCs
- */
-
-static inline bool __attribute_const__ cpu_is_u8500(void)
-{
- return dbx500_partnumber() == 0x8500;
-}
-
-static inline bool __attribute_const__ cpu_is_u8520(void)
-{
- return dbx500_partnumber() == 0x8520;
-}
-
-static inline bool cpu_is_u8500_family(void)
-{
- return cpu_is_u8500() || cpu_is_u8520();
-}
-
-static inline bool __attribute_const__ cpu_is_u9540(void)
-{
- return dbx500_partnumber() == 0x9540;
-}
-
-static inline bool __attribute_const__ cpu_is_u8540(void)
-{
- return dbx500_partnumber() == 0x8540;
-}
-
-static inline bool __attribute_const__ cpu_is_u8580(void)
-{
- return dbx500_partnumber() == 0x8580;
-}
-
-static inline bool cpu_is_ux540_family(void)
-{
- return cpu_is_u9540() || cpu_is_u8540() || cpu_is_u8580();
-}
-
-/*
- * 8500 revisions
- */
-
-static inline bool __attribute_const__ cpu_is_u8500ed(void)
-{
- return cpu_is_u8500() && dbx500_revision() == 0x00;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v1(void)
-{
- return cpu_is_u8500() && (dbx500_revision() & 0xf0) == 0xA0;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v10(void)
-{
- return cpu_is_u8500() && dbx500_revision() == 0xA0;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v11(void)
-{
- return cpu_is_u8500() && dbx500_revision() == 0xA1;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v2(void)
-{
- return cpu_is_u8500() && ((dbx500_revision() & 0xf0) == 0xB0);
-}
-
-static inline bool cpu_is_u8500v20(void)
-{
- return cpu_is_u8500() && (dbx500_revision() == 0xB0);
-}
-
-static inline bool cpu_is_u8500v21(void)
-{
- return cpu_is_u8500() && (dbx500_revision() == 0xB1);
-}
-
-static inline bool cpu_is_u8500v22(void)
-{
- return cpu_is_u8500() && (dbx500_revision() == 0xB2);
-}
-
-static inline bool cpu_is_u8500v20_or_later(void)
-{
- return (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11());
-}
-
-/*
- * 8540 revisions
- */
-
-static inline bool __attribute_const__ cpu_is_u8540v10(void)
-{
- return cpu_is_u8540() && dbx500_revision() == 0xA0;
-}
-
-static inline bool __attribute_const__ cpu_is_u8580v10(void)
-{
- return cpu_is_u8580() && dbx500_revision() == 0xA0;
-}
-
-static inline bool ux500_is_svp(void)
-{
- return false;
-}
-
-#define ux500_unknown_soc() BUG()
-
-#endif
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 88b8ab4f300c..8f2f615ff958 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -26,7 +26,6 @@
#include "setup.h"
#include "db8500-regs.h"
-#include "id.h"
/* Magic triggers in backup RAM */
#define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4
diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h
index c704254ab67c..988e7c77068d 100644
--- a/arch/arm/mach-ux500/setup.h
+++ b/arch/arm/mach-ux500/setup.h
@@ -11,18 +11,6 @@
#ifndef __ASM_ARCH_SETUP_H
#define __ASM_ARCH_SETUP_H
-#include <asm/mach/arch.h>
-#include <linux/init.h>
-#include <linux/mfd/abx500/ab8500.h>
-
-void ux500_restart(enum reboot_mode mode, const char *cmd);
-
-void __init ux500_setup_id(void);
-
-extern void __init ux500_init_irq(void);
-
-extern struct device *ux500_soc_device_init(const char *soc_id);
-
extern void ux500_cpu_die(unsigned int cpu);
#endif /* __ASM_ARCH_SETUP_H */
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 189d21541f9c..c19b82799a34 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -5,6 +5,7 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/hisi,hi6220-resets.h>
#include <dt-bindings/clock/hi6220-clock.h>
#include <dt-bindings/pinctrl/hisi.h>
#include <dt-bindings/thermal/thermal.h>
@@ -252,6 +253,7 @@
compatible = "hisilicon,hi6220-mediactrl", "syscon";
reg = <0x0 0xf4410000 0x0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
pm_ctrl: pm_ctrl@f7032000 {
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index c5a7de9bc783..3b205e212337 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -132,6 +132,19 @@ config SUNXI_RSB
with various RSB based devices, such as AXP223, AXP8XX PMICs,
and AC100/AC200 ICs.
+# TODO: This uses pm_clk_*() symbols that aren't exported in v4.7 and hence
+# the driver will fail to build as a module. However there are patches to
+# address that queued for v4.8, so this can be turned into a tristate symbol
+# after v4.8-rc1.
+config TEGRA_ACONNECT
+ bool "Tegra ACONNECT Bus Driver"
+ depends on ARCH_TEGRA_210_SOC
+ depends on OF && PM
+ select PM_CLK
+ help
+ Driver for the Tegra ACONNECT bus which is used to interface with
+ the devices inside the Audio Processing Engine (APE) for Tegra210.
+
config UNIPHIER_SYSTEM_BUS
tristate "UniPhier System Bus driver"
depends on ARCH_UNIPHIER && OF
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index ccff007ee7e8..ac84cc4348e3 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -17,5 +17,6 @@ obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o
obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o
obj-$(CONFIG_SUNXI_RSB) += sunxi-rsb.o
obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
+obj-$(CONFIG_TEGRA_ACONNECT) += tegra-aconnect.o
obj-$(CONFIG_UNIPHIER_SYSTEM_BUS) += uniphier-system-bus.o
obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o
diff --git a/drivers/bus/tegra-aconnect.c b/drivers/bus/tegra-aconnect.c
new file mode 100644
index 000000000000..7e4104b74fa8
--- /dev/null
+++ b/drivers/bus/tegra-aconnect.c
@@ -0,0 +1,112 @@
+/*
+ * Tegra ACONNECT Bus Driver
+ *
+ * Copyright (C) 2016, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
+
+static int tegra_aconnect_add_clock(struct device *dev, char *name)
+{
+ struct clk *clk;
+ int ret;
+
+ clk = clk_get(dev, name);
+ if (IS_ERR(clk)) {
+ dev_err(dev, "%s clock not found\n", name);
+ return PTR_ERR(clk);
+ }
+
+ ret = pm_clk_add_clk(dev, clk);
+ if (ret)
+ clk_put(clk);
+
+ return ret;
+}
+
+static int tegra_aconnect_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ if (!pdev->dev.of_node)
+ return -EINVAL;
+
+ ret = pm_clk_create(&pdev->dev);
+ if (ret)
+ return ret;
+
+ ret = tegra_aconnect_add_clock(&pdev->dev, "ape");
+ if (ret)
+ goto clk_destroy;
+
+ ret = tegra_aconnect_add_clock(&pdev->dev, "apb2ape");
+ if (ret)
+ goto clk_destroy;
+
+ pm_runtime_enable(&pdev->dev);
+
+ of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+
+ dev_info(&pdev->dev, "Tegra ACONNECT bus registered\n");
+
+ return 0;
+
+clk_destroy:
+ pm_clk_destroy(&pdev->dev);
+
+ return ret;
+}
+
+static int tegra_aconnect_remove(struct platform_device *pdev)
+{
+ pm_runtime_disable(&pdev->dev);
+
+ pm_clk_destroy(&pdev->dev);
+
+ return 0;
+}
+
+static int tegra_aconnect_runtime_resume(struct device *dev)
+{
+ return pm_clk_resume(dev);
+}
+
+static int tegra_aconnect_runtime_suspend(struct device *dev)
+{
+ return pm_clk_suspend(dev);
+}
+
+static const struct dev_pm_ops tegra_aconnect_pm_ops = {
+ SET_RUNTIME_PM_OPS(tegra_aconnect_runtime_suspend,
+ tegra_aconnect_runtime_resume, NULL)
+};
+
+static const struct of_device_id tegra_aconnect_of_match[] = {
+ { .compatible = "nvidia,tegra210-aconnect", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, tegra_aconnect_of_match);
+
+static struct platform_driver tegra_aconnect_driver = {
+ .probe = tegra_aconnect_probe,
+ .remove = tegra_aconnect_remove,
+ .driver = {
+ .name = "tegra-aconnect",
+ .of_match_table = tegra_aconnect_of_match,
+ .pm = &tegra_aconnect_pm_ops,
+ },
+};
+module_platform_driver(tegra_aconnect_driver);
+
+MODULE_DESCRIPTION("NVIDIA Tegra ACONNECT Bus Driver");
+MODULE_AUTHOR("Jon Hunter <jonathanh@nvidia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/clk-clps711x.c b/drivers/clk/clk-clps711x.c
index 1f60b02416a7..adaf109f2fe2 100644
--- a/drivers/clk/clk-clps711x.c
+++ b/drivers/clk/clk-clps711x.c
@@ -184,5 +184,5 @@ static void __init clps711x_clk_init_dt(struct device_node *np)
of_clk_add_provider(np, of_clk_src_onecell_get,
&clps711x_clk->clk_data);
}
-CLK_OF_DECLARE(clps711x, "cirrus,clps711x-clk", clps711x_clk_init_dt);
+CLK_OF_DECLARE(clps711x, "cirrus,ep7209-clk", clps711x_clk_init_dt);
#endif
diff --git a/drivers/clk/ux500/u8500_of_clk.c b/drivers/clk/ux500/u8500_of_clk.c
index 9a736d939806..e960d686d9db 100644
--- a/drivers/clk/ux500/u8500_of_clk.c
+++ b/drivers/clk/ux500/u8500_of_clk.c
@@ -11,7 +11,6 @@
#include <linux/of_address.h>
#include <linux/clk-provider.h>
#include <linux/mfd/dbx500-prcmu.h>
-#include <linux/platform_data/clk-ux500.h>
#include "clk.h"
#define PRCC_NUM_PERIPH_CLUSTERS 6
@@ -48,11 +47,6 @@ static struct clk *ux500_twocell_get(struct of_phandle_args *clkspec,
return PRCC_SHOW(clk_data, base, bit);
}
-static const struct of_device_id u8500_clk_of_match[] = {
- { .compatible = "stericsson,u8500-clks", },
- { },
-};
-
/* CLKRST4 is missing making it hard to index things */
enum clkrst_index {
CLKRST1_INDEX = 0,
@@ -63,22 +57,15 @@ enum clkrst_index {
CLKRST_MAX,
};
-void u8500_clk_init(void)
+static void u8500_clk_init(struct device_node *np)
{
struct prcmu_fw_version *fw_version;
- struct device_node *np = NULL;
struct device_node *child = NULL;
const char *sgaclk_parent = NULL;
struct clk *clk, *rtc_clk, *twd_clk;
u32 bases[CLKRST_MAX];
int i;
- if (of_have_populated_dt())
- np = of_find_matching_node(NULL, u8500_clk_of_match);
- if (!np) {
- pr_err("Either DT or U8500 Clock node not found\n");
- return;
- }
for (i = 0; i < ARRAY_SIZE(bases); i++) {
struct resource r;
@@ -573,3 +560,4 @@ void u8500_clk_init(void)
of_clk_add_provider(child, of_clk_src_simple_get, twd_clk);
}
}
+CLK_OF_DECLARE(u8500_clks, "stericsson,u8500-clks", u8500_clk_init);
diff --git a/drivers/clk/ux500/u8540_clk.c b/drivers/clk/ux500/u8540_clk.c
index 86549e59fb42..133859f0e2bf 100644
--- a/drivers/clk/ux500/u8540_clk.c
+++ b/drivers/clk/ux500/u8540_clk.c
@@ -12,14 +12,8 @@
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/mfd/dbx500-prcmu.h>
-#include <linux/platform_data/clk-ux500.h>
#include "clk.h"
-static const struct of_device_id u8540_clk_of_match[] = {
- { .compatible = "stericsson,u8540-clks", },
- { }
-};
-
/* CLKRST4 is missing making it hard to index things */
enum clkrst_index {
CLKRST1_INDEX = 0,
@@ -30,19 +24,12 @@ enum clkrst_index {
CLKRST_MAX,
};
-void u8540_clk_init(void)
+static void u8540_clk_init(struct device_node *np)
{
struct clk *clk;
- struct device_node *np = NULL;
u32 bases[CLKRST_MAX];
int i;
- if (of_have_populated_dt())
- np = of_find_matching_node(NULL, u8540_clk_of_match);
- if (!np) {
- pr_err("Either DT or U8540 Clock node not found\n");
- return;
- }
for (i = 0; i < ARRAY_SIZE(bases); i++) {
struct resource r;
@@ -607,3 +594,4 @@ void u8540_clk_init(void)
bases[CLKRST6_INDEX], BIT(0), CLK_SET_RATE_GATE);
clk_register_clkdev(clk, NULL, "rng");
}
+CLK_OF_DECLARE(u8540_clks, "stericsson,u8540-clks", u8540_clk_init);
diff --git a/drivers/clk/ux500/u9540_clk.c b/drivers/clk/ux500/u9540_clk.c
index 2138a4c8cbca..7b6bca49ce42 100644
--- a/drivers/clk/ux500/u9540_clk.c
+++ b/drivers/clk/ux500/u9540_clk.c
@@ -9,10 +9,10 @@
#include <linux/clk-provider.h>
#include <linux/mfd/dbx500-prcmu.h>
-#include <linux/platform_data/clk-ux500.h>
#include "clk.h"
-void u9540_clk_init(void)
+static void u9540_clk_init(struct device_node *np)
{
/* register clocks here */
}
+CLK_OF_DECLARE(u9540_clks, "stericsson,u9540-clks", u9540_clk_init);
diff --git a/drivers/clocksource/clps711x-timer.c b/drivers/clocksource/clps711x-timer.c
index 84aed78261e4..24db6d605549 100644
--- a/drivers/clocksource/clps711x-timer.c
+++ b/drivers/clocksource/clps711x-timer.c
@@ -119,5 +119,5 @@ static int __init clps711x_timer_init(struct device_node *np)
return -EINVAL;
}
}
-CLOCKSOURCE_OF_DECLARE(clps711x, "cirrus,clps711x-timer", clps711x_timer_init);
+CLOCKSOURCE_OF_DECLARE(clps711x, "cirrus,ep7209-timer", clps711x_timer_init);
#endif
diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
index 9e07588ea9f5..f82074eea779 100644
--- a/drivers/cpufreq/s5pv210-cpufreq.c
+++ b/drivers/cpufreq/s5pv210-cpufreq.c
@@ -220,7 +220,7 @@ static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq)
tmp1 /= tmp;
- __raw_writel(tmp1, reg);
+ writel_relaxed(tmp1, reg);
}
static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
@@ -296,29 +296,29 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
* 1. Temporary Change divider for MFC and G3D
* SCLKA2M(200/1=200)->(200/4=50)Mhz
*/
- reg = __raw_readl(S5P_CLK_DIV2);
+ reg = readl_relaxed(S5P_CLK_DIV2);
reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) |
(3 << S5P_CLKDIV2_MFC_SHIFT);
- __raw_writel(reg, S5P_CLK_DIV2);
+ writel_relaxed(reg, S5P_CLK_DIV2);
/* For MFC, G3D dividing */
do {
- reg = __raw_readl(S5P_CLKDIV_STAT0);
+ reg = readl_relaxed(S5P_CLKDIV_STAT0);
} while (reg & ((1 << 16) | (1 << 17)));
/*
* 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX
* (200/4=50)->(667/4=166)Mhz
*/
- reg = __raw_readl(S5P_CLK_SRC2);
+ reg = readl_relaxed(S5P_CLK_SRC2);
reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) |
(1 << S5P_CLKSRC2_MFC_SHIFT);
- __raw_writel(reg, S5P_CLK_SRC2);
+ writel_relaxed(reg, S5P_CLK_SRC2);
do {
- reg = __raw_readl(S5P_CLKMUX_STAT1);
+ reg = readl_relaxed(S5P_CLKMUX_STAT1);
} while (reg & ((1 << 7) | (1 << 3)));
/*
@@ -330,19 +330,19 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
s5pv210_set_refresh(DMC1, 133000);
/* 4. SCLKAPLL -> SCLKMPLL */
- reg = __raw_readl(S5P_CLK_SRC0);
+ reg = readl_relaxed(S5P_CLK_SRC0);
reg &= ~(S5P_CLKSRC0_MUX200_MASK);
reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT);
- __raw_writel(reg, S5P_CLK_SRC0);
+ writel_relaxed(reg, S5P_CLK_SRC0);
do {
- reg = __raw_readl(S5P_CLKMUX_STAT0);
+ reg = readl_relaxed(S5P_CLKMUX_STAT0);
} while (reg & (0x1 << 18));
}
/* Change divider */
- reg = __raw_readl(S5P_CLK_DIV0);
+ reg = readl_relaxed(S5P_CLK_DIV0);
reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK |
S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK |
@@ -358,25 +358,25 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
(clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) |
(clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT));
- __raw_writel(reg, S5P_CLK_DIV0);
+ writel_relaxed(reg, S5P_CLK_DIV0);
do {
- reg = __raw_readl(S5P_CLKDIV_STAT0);
+ reg = readl_relaxed(S5P_CLKDIV_STAT0);
} while (reg & 0xff);
/* ARM MCS value changed */
- reg = __raw_readl(S5P_ARM_MCS_CON);
+ reg = readl_relaxed(S5P_ARM_MCS_CON);
reg &= ~0x3;
if (index >= L3)
reg |= 0x3;
else
reg |= 0x1;
- __raw_writel(reg, S5P_ARM_MCS_CON);
+ writel_relaxed(reg, S5P_ARM_MCS_CON);
if (pll_changing) {
/* 5. Set Lock time = 30us*24Mhz = 0x2cf */
- __raw_writel(0x2cf, S5P_APLL_LOCK);
+ writel_relaxed(0x2cf, S5P_APLL_LOCK);
/*
* 6. Turn on APLL
@@ -384,12 +384,12 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
* 6-2. Wait untile the PLL is locked
*/
if (index == L0)
- __raw_writel(APLL_VAL_1000, S5P_APLL_CON);
+ writel_relaxed(APLL_VAL_1000, S5P_APLL_CON);
else
- __raw_writel(APLL_VAL_800, S5P_APLL_CON);
+ writel_relaxed(APLL_VAL_800, S5P_APLL_CON);
do {
- reg = __raw_readl(S5P_APLL_CON);
+ reg = readl_relaxed(S5P_APLL_CON);
} while (!(reg & (0x1 << 29)));
/*
@@ -397,39 +397,39 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
* to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX
* (667/4=166)->(200/4=50)Mhz
*/
- reg = __raw_readl(S5P_CLK_SRC2);
+ reg = readl_relaxed(S5P_CLK_SRC2);
reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) |
(0 << S5P_CLKSRC2_MFC_SHIFT);
- __raw_writel(reg, S5P_CLK_SRC2);
+ writel_relaxed(reg, S5P_CLK_SRC2);
do {
- reg = __raw_readl(S5P_CLKMUX_STAT1);
+ reg = readl_relaxed(S5P_CLKMUX_STAT1);
} while (reg & ((1 << 7) | (1 << 3)));
/*
* 8. Change divider for MFC and G3D
* (200/4=50)->(200/1=200)Mhz
*/
- reg = __raw_readl(S5P_CLK_DIV2);
+ reg = readl_relaxed(S5P_CLK_DIV2);
reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) |
(clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT);
- __raw_writel(reg, S5P_CLK_DIV2);
+ writel_relaxed(reg, S5P_CLK_DIV2);
/* For MFC, G3D dividing */
do {
- reg = __raw_readl(S5P_CLKDIV_STAT0);
+ reg = readl_relaxed(S5P_CLKDIV_STAT0);
} while (reg & ((1 << 16) | (1 << 17)));
/* 9. Change MPLL to APLL in MSYS_MUX */
- reg = __raw_readl(S5P_CLK_SRC0);
+ reg = readl_relaxed(S5P_CLK_SRC0);
reg &= ~(S5P_CLKSRC0_MUX200_MASK);
reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT);
- __raw_writel(reg, S5P_CLK_SRC0);
+ writel_relaxed(reg, S5P_CLK_SRC0);
do {
- reg = __raw_readl(S5P_CLKMUX_STAT0);
+ reg = readl_relaxed(S5P_CLKMUX_STAT0);
} while (reg & (0x1 << 18));
/*
@@ -446,13 +446,13 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
* and memory refresh parameter should be changed
*/
if (bus_speed_changing) {
- reg = __raw_readl(S5P_CLK_DIV6);
+ reg = readl_relaxed(S5P_CLK_DIV6);
reg &= ~S5P_CLKDIV6_ONEDRAM_MASK;
reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT);
- __raw_writel(reg, S5P_CLK_DIV6);
+ writel_relaxed(reg, S5P_CLK_DIV6);
do {
- reg = __raw_readl(S5P_CLKDIV_STAT1);
+ reg = readl_relaxed(S5P_CLKDIV_STAT1);
} while (reg & (1 << 15));
/* Reconfigure DRAM refresh counter value */
@@ -492,7 +492,7 @@ static int check_mem_type(void __iomem *dmc_reg)
{
unsigned long val;
- val = __raw_readl(dmc_reg + 0x4);
+ val = readl_relaxed(dmc_reg + 0x4);
val = (val & (0xf << 8));
return val >> 8;
@@ -537,10 +537,10 @@ static int s5pv210_cpu_init(struct cpufreq_policy *policy)
}
/* Find current refresh counter and frequency each DMC */
- s5pv210_dram_conf[0].refresh = (__raw_readl(dmc_base[0] + 0x30) * 1000);
+ s5pv210_dram_conf[0].refresh = (readl_relaxed(dmc_base[0] + 0x30) * 1000);
s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk);
- s5pv210_dram_conf[1].refresh = (__raw_readl(dmc_base[1] + 0x30) * 1000);
+ s5pv210_dram_conf[1].refresh = (readl_relaxed(dmc_base[1] + 0x30) * 1000);
s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk);
policy->suspend_freq = SLEEP_FREQ;
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 6664f1108c7c..0e22f241403b 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -10,7 +10,7 @@ config ARM_PSCI_FW
config ARM_SCPI_PROTOCOL
tristate "ARM System Control and Power Interface (SCPI) Message Protocol"
- depends on ARM_MHU
+ depends on MAILBOX
help
System Control and Power Interface (SCPI) Message Protocol is
defined for the purpose of communication between the Application
@@ -27,6 +27,15 @@ config ARM_SCPI_PROTOCOL
This protocol library provides interface for all the client drivers
making use of the features offered by the SCP.
+config ARM_SCPI_POWER_DOMAIN
+ tristate "SCPI power domain driver"
+ depends on ARM_SCPI_PROTOCOL || (COMPILE_TEST && OF)
+ default y
+ select PM_GENERIC_DOMAINS if PM
+ help
+ This enables support for the SCPI power domains which can be
+ enabled or disabled via the SCP firmware
+
config EDD
tristate "BIOS Enhanced Disk Drive calls determine boot disk"
depends on X86
@@ -184,6 +193,7 @@ config FW_CFG_SYSFS_CMDLINE
config QCOM_SCM
bool
depends on ARM || ARM64
+ select RESET_CONTROLLER
config QCOM_SCM_32
def_bool y
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 474bada56fcd..44a59dcfc398 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -3,6 +3,7 @@
#
obj-$(CONFIG_ARM_PSCI_FW) += psci.o
obj-$(CONFIG_ARM_SCPI_PROTOCOL) += arm_scpi.o
+obj-$(CONFIG_ARM_SCPI_POWER_DOMAIN) += scpi_pm_domain.o
obj-$(CONFIG_DMI) += dmi_scan.o
obj-$(CONFIG_DMI_SYSFS) += dmi-sysfs.o
obj-$(CONFIG_EDD) += edd.o
diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
index 7e3e595c9f30..438893762076 100644
--- a/drivers/firmware/arm_scpi.c
+++ b/drivers/firmware/arm_scpi.c
@@ -210,10 +210,6 @@ struct dvfs_info {
} opps[MAX_DVFS_OPPS];
} __packed;
-struct dvfs_get {
- u8 index;
-} __packed;
-
struct dvfs_set {
u8 domain;
u8 index;
@@ -235,6 +231,11 @@ struct sensor_value {
__le32 hi_val;
} __packed;
+struct dev_pstate_set {
+ u16 dev_id;
+ u8 pstate;
+} __packed;
+
static struct scpi_drvinfo *scpi_info;
static int scpi_linux_errmap[SCPI_ERR_MAX] = {
@@ -431,11 +432,11 @@ static int scpi_clk_set_val(u16 clk_id, unsigned long rate)
static int scpi_dvfs_get_idx(u8 domain)
{
int ret;
- struct dvfs_get dvfs;
+ u8 dvfs_idx;
ret = scpi_send_message(SCPI_CMD_GET_DVFS, &domain, sizeof(domain),
- &dvfs, sizeof(dvfs));
- return ret ? ret : dvfs.index;
+ &dvfs_idx, sizeof(dvfs_idx));
+ return ret ? ret : dvfs_idx;
}
static int scpi_dvfs_set_idx(u8 domain, u8 index)
@@ -526,7 +527,7 @@ static int scpi_sensor_get_info(u16 sensor_id, struct scpi_sensor_info *info)
return ret;
}
-int scpi_sensor_get_value(u16 sensor, u64 *val)
+static int scpi_sensor_get_value(u16 sensor, u64 *val)
{
__le16 id = cpu_to_le16(sensor);
struct sensor_value buf;
@@ -541,6 +542,29 @@ int scpi_sensor_get_value(u16 sensor, u64 *val)
return ret;
}
+static int scpi_device_get_power_state(u16 dev_id)
+{
+ int ret;
+ u8 pstate;
+ __le16 id = cpu_to_le16(dev_id);
+
+ ret = scpi_send_message(SCPI_CMD_GET_DEVICE_PWR_STATE, &id,
+ sizeof(id), &pstate, sizeof(pstate));
+ return ret ? ret : pstate;
+}
+
+static int scpi_device_set_power_state(u16 dev_id, u8 pstate)
+{
+ int stat;
+ struct dev_pstate_set dev_set = {
+ .dev_id = cpu_to_le16(dev_id),
+ .pstate = pstate,
+ };
+
+ return scpi_send_message(SCPI_CMD_SET_DEVICE_PWR_STATE, &dev_set,
+ sizeof(dev_set), &stat, sizeof(stat));
+}
+
static struct scpi_ops scpi_ops = {
.get_version = scpi_get_version,
.clk_get_range = scpi_clk_get_range,
@@ -552,6 +576,8 @@ static struct scpi_ops scpi_ops = {
.sensor_get_capability = scpi_sensor_get_capability,
.sensor_get_info = scpi_sensor_get_info,
.sensor_get_value = scpi_sensor_get_value,
+ .device_get_power_state = scpi_device_get_power_state,
+ .device_set_power_state = scpi_device_set_power_state,
};
struct scpi_ops *get_scpi_ops(void)
diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c
index 0883292f640f..c6aeedbdcbb0 100644
--- a/drivers/firmware/qcom_scm-32.c
+++ b/drivers/firmware/qcom_scm-32.c
@@ -23,8 +23,7 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/qcom_scm.h>
-
-#include <asm/cacheflush.h>
+#include <linux/dma-mapping.h>
#include "qcom_scm.h"
@@ -97,44 +96,6 @@ struct qcom_scm_response {
};
/**
- * alloc_qcom_scm_command() - Allocate an SCM command
- * @cmd_size: size of the command buffer
- * @resp_size: size of the response buffer
- *
- * Allocate an SCM command, including enough room for the command
- * and response headers as well as the command and response buffers.
- *
- * Returns a valid &qcom_scm_command on success or %NULL if the allocation fails.
- */
-static struct qcom_scm_command *alloc_qcom_scm_command(size_t cmd_size, size_t resp_size)
-{
- struct qcom_scm_command *cmd;
- size_t len = sizeof(*cmd) + sizeof(struct qcom_scm_response) + cmd_size +
- resp_size;
- u32 offset;
-
- cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
- if (cmd) {
- cmd->len = cpu_to_le32(len);
- offset = offsetof(struct qcom_scm_command, buf);
- cmd->buf_offset = cpu_to_le32(offset);
- cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size);
- }
- return cmd;
-}
-
-/**
- * free_qcom_scm_command() - Free an SCM command
- * @cmd: command to free
- *
- * Free an SCM command.
- */
-static inline void free_qcom_scm_command(struct qcom_scm_command *cmd)
-{
- kfree(cmd);
-}
-
-/**
* qcom_scm_command_to_response() - Get a pointer to a qcom_scm_response
* @cmd: command
*
@@ -168,23 +129,6 @@ static inline void *qcom_scm_get_response_buffer(const struct qcom_scm_response
return (void *)rsp + le32_to_cpu(rsp->buf_offset);
}
-static int qcom_scm_remap_error(int err)
-{
- pr_err("qcom_scm_call failed with error code %d\n", err);
- switch (err) {
- case QCOM_SCM_ERROR:
- return -EIO;
- case QCOM_SCM_EINVAL_ADDR:
- case QCOM_SCM_EINVAL_ARG:
- return -EINVAL;
- case QCOM_SCM_EOPNOTSUPP:
- return -EOPNOTSUPP;
- case QCOM_SCM_ENOMEM:
- return -ENOMEM;
- }
- return -EINVAL;
-}
-
static u32 smc(u32 cmd_addr)
{
int context_id;
@@ -209,45 +153,9 @@ static u32 smc(u32 cmd_addr)
return r0;
}
-static int __qcom_scm_call(const struct qcom_scm_command *cmd)
-{
- int ret;
- u32 cmd_addr = virt_to_phys(cmd);
-
- /*
- * Flush the command buffer so that the secure world sees
- * the correct data.
- */
- secure_flush_area(cmd, cmd->len);
-
- ret = smc(cmd_addr);
- if (ret < 0)
- ret = qcom_scm_remap_error(ret);
-
- return ret;
-}
-
-static void qcom_scm_inv_range(unsigned long start, unsigned long end)
-{
- u32 cacheline_size, ctr;
-
- asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr));
- cacheline_size = 4 << ((ctr >> 16) & 0xf);
-
- start = round_down(start, cacheline_size);
- end = round_up(end, cacheline_size);
- outer_inv_range(start, end);
- while (start < end) {
- asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
- : "memory");
- start += cacheline_size;
- }
- dsb();
- isb();
-}
-
/**
* qcom_scm_call() - Send an SCM command
+ * @dev: struct device
* @svc_id: service identifier
* @cmd_id: command identifier
* @cmd_buf: command buffer
@@ -264,42 +172,59 @@ static void qcom_scm_inv_range(unsigned long start, unsigned long end)
* and response buffers is taken care of by qcom_scm_call; however, callers are
* responsible for any other cached buffers passed over to the secure world.
*/
-static int qcom_scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf,
- size_t cmd_len, void *resp_buf, size_t resp_len)
+static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
+ const void *cmd_buf, size_t cmd_len, void *resp_buf,
+ size_t resp_len)
{
int ret;
struct qcom_scm_command *cmd;
struct qcom_scm_response *rsp;
- unsigned long start, end;
+ size_t alloc_len = sizeof(*cmd) + cmd_len + sizeof(*rsp) + resp_len;
+ dma_addr_t cmd_phys;
- cmd = alloc_qcom_scm_command(cmd_len, resp_len);
+ cmd = kzalloc(PAGE_ALIGN(alloc_len), GFP_KERNEL);
if (!cmd)
return -ENOMEM;
+ cmd->len = cpu_to_le32(alloc_len);
+ cmd->buf_offset = cpu_to_le32(sizeof(*cmd));
+ cmd->resp_hdr_offset = cpu_to_le32(sizeof(*cmd) + cmd_len);
+
cmd->id = cpu_to_le32((svc_id << 10) | cmd_id);
if (cmd_buf)
memcpy(qcom_scm_get_command_buffer(cmd), cmd_buf, cmd_len);
+ rsp = qcom_scm_command_to_response(cmd);
+
+ cmd_phys = dma_map_single(dev, cmd, alloc_len, DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, cmd_phys)) {
+ kfree(cmd);
+ return -ENOMEM;
+ }
+
mutex_lock(&qcom_scm_lock);
- ret = __qcom_scm_call(cmd);
+ ret = smc(cmd_phys);
+ if (ret < 0)
+ ret = qcom_scm_remap_error(ret);
mutex_unlock(&qcom_scm_lock);
if (ret)
goto out;
- rsp = qcom_scm_command_to_response(cmd);
- start = (unsigned long)rsp;
-
do {
- qcom_scm_inv_range(start, start + sizeof(*rsp));
+ dma_sync_single_for_cpu(dev, cmd_phys + sizeof(*cmd) + cmd_len,
+ sizeof(*rsp), DMA_FROM_DEVICE);
} while (!rsp->is_complete);
- end = (unsigned long)qcom_scm_get_response_buffer(rsp) + resp_len;
- qcom_scm_inv_range(start, end);
-
- if (resp_buf)
- memcpy(resp_buf, qcom_scm_get_response_buffer(rsp), resp_len);
+ if (resp_buf) {
+ dma_sync_single_for_cpu(dev, cmd_phys + sizeof(*cmd) + cmd_len +
+ le32_to_cpu(rsp->buf_offset),
+ resp_len, DMA_FROM_DEVICE);
+ memcpy(resp_buf, qcom_scm_get_response_buffer(rsp),
+ resp_len);
+ }
out:
- free_qcom_scm_command(cmd);
+ dma_unmap_single(dev, cmd_phys, alloc_len, DMA_TO_DEVICE);
+ kfree(cmd);
return ret;
}
@@ -342,6 +267,41 @@ static s32 qcom_scm_call_atomic1(u32 svc, u32 cmd, u32 arg1)
return r0;
}
+/**
+ * qcom_scm_call_atomic2() - Send an atomic SCM command with two arguments
+ * @svc_id: service identifier
+ * @cmd_id: command identifier
+ * @arg1: first argument
+ * @arg2: second argument
+ *
+ * This shall only be used with commands that are guaranteed to be
+ * uninterruptable, atomic and SMP safe.
+ */
+static s32 qcom_scm_call_atomic2(u32 svc, u32 cmd, u32 arg1, u32 arg2)
+{
+ int context_id;
+
+ register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 2);
+ register u32 r1 asm("r1") = (u32)&context_id;
+ register u32 r2 asm("r2") = arg1;
+ register u32 r3 asm("r3") = arg2;
+
+ asm volatile(
+ __asmeq("%0", "r0")
+ __asmeq("%1", "r0")
+ __asmeq("%2", "r1")
+ __asmeq("%3", "r2")
+ __asmeq("%4", "r3")
+#ifdef REQUIRES_SEC
+ ".arch_extension sec\n"
+#endif
+ "smc #0 @ switch to secure world\n"
+ : "=r" (r0)
+ : "r" (r0), "r" (r1), "r" (r2), "r" (r3)
+ );
+ return r0;
+}
+
u32 qcom_scm_get_version(void)
{
int context_id;
@@ -378,22 +338,6 @@ u32 qcom_scm_get_version(void)
}
EXPORT_SYMBOL(qcom_scm_get_version);
-/*
- * Set the cold/warm boot address for one of the CPU cores.
- */
-static int qcom_scm_set_boot_addr(u32 addr, int flags)
-{
- struct {
- __le32 flags;
- __le32 addr;
- } cmd;
-
- cmd.addr = cpu_to_le32(addr);
- cmd.flags = cpu_to_le32(flags);
- return qcom_scm_call(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
- &cmd, sizeof(cmd), NULL, 0);
-}
-
/**
* qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
* @entry: Entry point function for the cpus
@@ -423,7 +367,8 @@ int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
set_cpu_present(cpu, false);
}
- return qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
+ return qcom_scm_call_atomic2(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
+ flags, virt_to_phys(entry));
}
/**
@@ -434,11 +379,16 @@ int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
* Set the Linux entry point for the SCM to transfer control to when coming
* out of a power down. CPU power down may be executed on cpuidle or hotplug.
*/
-int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
+int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
+ const cpumask_t *cpus)
{
int ret;
int flags = 0;
int cpu;
+ struct {
+ __le32 flags;
+ __le32 addr;
+ } cmd;
/*
* Reassign only if we are switching from hotplug entry point
@@ -454,7 +404,10 @@ int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
if (!flags)
return 0;
- ret = qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
+ cmd.addr = cpu_to_le32(virt_to_phys(entry));
+ cmd.flags = cpu_to_le32(flags);
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
+ &cmd, sizeof(cmd), NULL, 0);
if (!ret) {
for_each_cpu(cpu, cpus)
qcom_scm_wb[cpu].entry = entry;
@@ -477,25 +430,133 @@ void __qcom_scm_cpu_power_down(u32 flags)
flags & QCOM_SCM_FLUSH_FLAG_MASK);
}
-int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id)
+int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
{
int ret;
__le32 svc_cmd = cpu_to_le32((svc_id << 10) | cmd_id);
__le32 ret_val = 0;
- ret = qcom_scm_call(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD, &svc_cmd,
- sizeof(svc_cmd), &ret_val, sizeof(ret_val));
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD,
+ &svc_cmd, sizeof(svc_cmd), &ret_val,
+ sizeof(ret_val));
if (ret)
return ret;
return le32_to_cpu(ret_val);
}
-int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
+int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
+ u32 req_cnt, u32 *resp)
{
if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
return -ERANGE;
- return qcom_scm_call(QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP,
+ return qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP,
req, req_cnt * sizeof(*req), resp, sizeof(*resp));
}
+
+void __qcom_scm_init(void)
+{
+}
+
+bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
+{
+ __le32 out;
+ __le32 in;
+ int ret;
+
+ in = cpu_to_le32(peripheral);
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
+ QCOM_SCM_PAS_IS_SUPPORTED_CMD,
+ &in, sizeof(in),
+ &out, sizeof(out));
+
+ return ret ? false : !!out;
+}
+
+int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
+ dma_addr_t metadata_phys)
+{
+ __le32 scm_ret;
+ int ret;
+ struct {
+ __le32 proc;
+ __le32 image_addr;
+ } request;
+
+ request.proc = cpu_to_le32(peripheral);
+ request.image_addr = cpu_to_le32(metadata_phys);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
+ QCOM_SCM_PAS_INIT_IMAGE_CMD,
+ &request, sizeof(request),
+ &scm_ret, sizeof(scm_ret));
+
+ return ret ? : le32_to_cpu(scm_ret);
+}
+
+int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
+ phys_addr_t addr, phys_addr_t size)
+{
+ __le32 scm_ret;
+ int ret;
+ struct {
+ __le32 proc;
+ __le32 addr;
+ __le32 len;
+ } request;
+
+ request.proc = cpu_to_le32(peripheral);
+ request.addr = cpu_to_le32(addr);
+ request.len = cpu_to_le32(size);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
+ QCOM_SCM_PAS_MEM_SETUP_CMD,
+ &request, sizeof(request),
+ &scm_ret, sizeof(scm_ret));
+
+ return ret ? : le32_to_cpu(scm_ret);
+}
+
+int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
+{
+ __le32 out;
+ __le32 in;
+ int ret;
+
+ in = cpu_to_le32(peripheral);
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
+ QCOM_SCM_PAS_AUTH_AND_RESET_CMD,
+ &in, sizeof(in),
+ &out, sizeof(out));
+
+ return ret ? : le32_to_cpu(out);
+}
+
+int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
+{
+ __le32 out;
+ __le32 in;
+ int ret;
+
+ in = cpu_to_le32(peripheral);
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
+ QCOM_SCM_PAS_SHUTDOWN_CMD,
+ &in, sizeof(in),
+ &out, sizeof(out));
+
+ return ret ? : le32_to_cpu(out);
+}
+
+int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
+{
+ __le32 out;
+ __le32 in = cpu_to_le32(reset);
+ int ret;
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MSS_RESET,
+ &in, sizeof(in),
+ &out, sizeof(out));
+
+ return ret ? : le32_to_cpu(out);
+}
diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
index bb6555f6d63b..4a0f5ead4fb5 100644
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -12,7 +12,150 @@
#include <linux/io.h>
#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/types.h>
#include <linux/qcom_scm.h>
+#include <linux/arm-smccc.h>
+#include <linux/dma-mapping.h>
+
+#include "qcom_scm.h"
+
+#define QCOM_SCM_FNID(s, c) ((((s) & 0xFF) << 8) | ((c) & 0xFF))
+
+#define MAX_QCOM_SCM_ARGS 10
+#define MAX_QCOM_SCM_RETS 3
+
+enum qcom_scm_arg_types {
+ QCOM_SCM_VAL,
+ QCOM_SCM_RO,
+ QCOM_SCM_RW,
+ QCOM_SCM_BUFVAL,
+};
+
+#define QCOM_SCM_ARGS_IMPL(num, a, b, c, d, e, f, g, h, i, j, ...) (\
+ (((a) & 0x3) << 4) | \
+ (((b) & 0x3) << 6) | \
+ (((c) & 0x3) << 8) | \
+ (((d) & 0x3) << 10) | \
+ (((e) & 0x3) << 12) | \
+ (((f) & 0x3) << 14) | \
+ (((g) & 0x3) << 16) | \
+ (((h) & 0x3) << 18) | \
+ (((i) & 0x3) << 20) | \
+ (((j) & 0x3) << 22) | \
+ ((num) & 0xf))
+
+#define QCOM_SCM_ARGS(...) QCOM_SCM_ARGS_IMPL(__VA_ARGS__, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0)
+
+/**
+ * struct qcom_scm_desc
+ * @arginfo: Metadata describing the arguments in args[]
+ * @args: The array of arguments for the secure syscall
+ * @res: The values returned by the secure syscall
+ */
+struct qcom_scm_desc {
+ u32 arginfo;
+ u64 args[MAX_QCOM_SCM_ARGS];
+};
+
+static u64 qcom_smccc_convention = -1;
+static DEFINE_MUTEX(qcom_scm_lock);
+
+#define QCOM_SCM_EBUSY_WAIT_MS 30
+#define QCOM_SCM_EBUSY_MAX_RETRY 20
+
+#define N_EXT_QCOM_SCM_ARGS 7
+#define FIRST_EXT_ARG_IDX 3
+#define N_REGISTER_ARGS (MAX_QCOM_SCM_ARGS - N_EXT_QCOM_SCM_ARGS + 1)
+
+/**
+ * qcom_scm_call() - Invoke a syscall in the secure world
+ * @dev: device
+ * @svc_id: service identifier
+ * @cmd_id: command identifier
+ * @desc: Descriptor structure containing arguments and return values
+ *
+ * Sends a command to the SCM and waits for the command to finish processing.
+ * This should *only* be called in pre-emptible context.
+*/
+static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
+ const struct qcom_scm_desc *desc,
+ struct arm_smccc_res *res)
+{
+ int arglen = desc->arginfo & 0xf;
+ int retry_count = 0, i;
+ u32 fn_id = QCOM_SCM_FNID(svc_id, cmd_id);
+ u64 cmd, x5 = desc->args[FIRST_EXT_ARG_IDX];
+ dma_addr_t args_phys = 0;
+ void *args_virt = NULL;
+ size_t alloc_len;
+
+ if (unlikely(arglen > N_REGISTER_ARGS)) {
+ alloc_len = N_EXT_QCOM_SCM_ARGS * sizeof(u64);
+ args_virt = kzalloc(PAGE_ALIGN(alloc_len), GFP_KERNEL);
+
+ if (!args_virt)
+ return -ENOMEM;
+
+ if (qcom_smccc_convention == ARM_SMCCC_SMC_32) {
+ __le32 *args = args_virt;
+
+ for (i = 0; i < N_EXT_QCOM_SCM_ARGS; i++)
+ args[i] = cpu_to_le32(desc->args[i +
+ FIRST_EXT_ARG_IDX]);
+ } else {
+ __le64 *args = args_virt;
+
+ for (i = 0; i < N_EXT_QCOM_SCM_ARGS; i++)
+ args[i] = cpu_to_le64(desc->args[i +
+ FIRST_EXT_ARG_IDX]);
+ }
+
+ args_phys = dma_map_single(dev, args_virt, alloc_len,
+ DMA_TO_DEVICE);
+
+ if (dma_mapping_error(dev, args_phys)) {
+ kfree(args_virt);
+ return -ENOMEM;
+ }
+
+ x5 = args_phys;
+ }
+
+ do {
+ mutex_lock(&qcom_scm_lock);
+
+ cmd = ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL,
+ qcom_smccc_convention,
+ ARM_SMCCC_OWNER_SIP, fn_id);
+
+ do {
+ arm_smccc_smc(cmd, desc->arginfo, desc->args[0],
+ desc->args[1], desc->args[2], x5, 0, 0,
+ res);
+ } while (res->a0 == QCOM_SCM_INTERRUPTED);
+
+ mutex_unlock(&qcom_scm_lock);
+
+ if (res->a0 == QCOM_SCM_V2_EBUSY) {
+ if (retry_count++ > QCOM_SCM_EBUSY_MAX_RETRY)
+ break;
+ msleep(QCOM_SCM_EBUSY_WAIT_MS);
+ }
+ } while (res->a0 == QCOM_SCM_V2_EBUSY);
+
+ if (args_virt) {
+ dma_unmap_single(dev, args_phys, alloc_len, DMA_TO_DEVICE);
+ kfree(args_virt);
+ }
+
+ if (res->a0 < 0)
+ return qcom_scm_remap_error(res->a0);
+
+ return 0;
+}
/**
* qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
@@ -29,13 +172,15 @@ int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
/**
* qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
+ * @dev: Device pointer
* @entry: Entry point function for the cpus
* @cpus: The cpumask of cpus that will use the entry point
*
* Set the Linux entry point for the SCM to transfer control to when coming
* out of a power down. CPU power down may be executed on cpuidle or hotplug.
*/
-int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
+int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
+ const cpumask_t *cpus)
{
return -ENOTSUPP;
}
@@ -52,12 +197,164 @@ void __qcom_scm_cpu_power_down(u32 flags)
{
}
-int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id)
+int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
{
- return -ENOTSUPP;
+ int ret;
+ struct qcom_scm_desc desc = {0};
+ struct arm_smccc_res res;
+
+ desc.arginfo = QCOM_SCM_ARGS(1);
+ desc.args[0] = QCOM_SCM_FNID(svc_id, cmd_id) |
+ (ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD,
+ &desc, &res);
+
+ return ret ? : res.a1;
}
-int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
+int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
+ u32 req_cnt, u32 *resp)
{
- return -ENOTSUPP;
+ int ret;
+ struct qcom_scm_desc desc = {0};
+ struct arm_smccc_res res;
+
+ if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
+ return -ERANGE;
+
+ desc.args[0] = req[0].addr;
+ desc.args[1] = req[0].val;
+ desc.args[2] = req[1].addr;
+ desc.args[3] = req[1].val;
+ desc.args[4] = req[2].addr;
+ desc.args[5] = req[2].val;
+ desc.args[6] = req[3].addr;
+ desc.args[7] = req[3].val;
+ desc.args[8] = req[4].addr;
+ desc.args[9] = req[4].val;
+ desc.arginfo = QCOM_SCM_ARGS(10);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP, &desc,
+ &res);
+ *resp = res.a1;
+
+ return ret;
+}
+
+void __qcom_scm_init(void)
+{
+ u64 cmd;
+ struct arm_smccc_res res;
+ u32 function = QCOM_SCM_FNID(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD);
+
+ /* First try a SMC64 call */
+ cmd = ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64,
+ ARM_SMCCC_OWNER_SIP, function);
+
+ arm_smccc_smc(cmd, QCOM_SCM_ARGS(1), cmd & (~BIT(ARM_SMCCC_TYPE_SHIFT)),
+ 0, 0, 0, 0, 0, &res);
+
+ if (!res.a0 && res.a1)
+ qcom_smccc_convention = ARM_SMCCC_SMC_64;
+ else
+ qcom_smccc_convention = ARM_SMCCC_SMC_32;
+}
+
+bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
+{
+ int ret;
+ struct qcom_scm_desc desc = {0};
+ struct arm_smccc_res res;
+
+ desc.args[0] = peripheral;
+ desc.arginfo = QCOM_SCM_ARGS(1);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
+ QCOM_SCM_PAS_IS_SUPPORTED_CMD,
+ &desc, &res);
+
+ return ret ? false : !!res.a1;
+}
+
+int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
+ dma_addr_t metadata_phys)
+{
+ int ret;
+ struct qcom_scm_desc desc = {0};
+ struct arm_smccc_res res;
+
+ desc.args[0] = peripheral;
+ desc.args[1] = metadata_phys;
+ desc.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_INIT_IMAGE_CMD,
+ &desc, &res);
+
+ return ret ? : res.a1;
+}
+
+int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
+ phys_addr_t addr, phys_addr_t size)
+{
+ int ret;
+ struct qcom_scm_desc desc = {0};
+ struct arm_smccc_res res;
+
+ desc.args[0] = peripheral;
+ desc.args[1] = addr;
+ desc.args[2] = size;
+ desc.arginfo = QCOM_SCM_ARGS(3);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MEM_SETUP_CMD,
+ &desc, &res);
+
+ return ret ? : res.a1;
+}
+
+int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
+{
+ int ret;
+ struct qcom_scm_desc desc = {0};
+ struct arm_smccc_res res;
+
+ desc.args[0] = peripheral;
+ desc.arginfo = QCOM_SCM_ARGS(1);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
+ QCOM_SCM_PAS_AUTH_AND_RESET_CMD,
+ &desc, &res);
+
+ return ret ? : res.a1;
+}
+
+int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
+{
+ int ret;
+ struct qcom_scm_desc desc = {0};
+ struct arm_smccc_res res;
+
+ desc.args[0] = peripheral;
+ desc.arginfo = QCOM_SCM_ARGS(1);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_SHUTDOWN_CMD,
+ &desc, &res);
+
+ return ret ? : res.a1;
+}
+
+int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
+{
+ struct qcom_scm_desc desc = {0};
+ struct arm_smccc_res res;
+ int ret;
+
+ desc.args[0] = reset;
+ desc.args[1] = 0;
+ desc.arginfo = QCOM_SCM_ARGS(2);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MSS_RESET, &desc,
+ &res);
+
+ return ret ? : res.a1;
}
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 45c008d68891..e64a501adbf4 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -10,19 +10,64 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
*/
-
+#include <linux/platform_device.h>
+#include <linux/module.h>
#include <linux/cpumask.h>
#include <linux/export.h>
+#include <linux/dma-mapping.h>
#include <linux/types.h>
#include <linux/qcom_scm.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/clk.h>
+#include <linux/reset-controller.h>
#include "qcom_scm.h"
+struct qcom_scm {
+ struct device *dev;
+ struct clk *core_clk;
+ struct clk *iface_clk;
+ struct clk *bus_clk;
+ struct reset_controller_dev reset;
+};
+
+static struct qcom_scm *__scm;
+
+static int qcom_scm_clk_enable(void)
+{
+ int ret;
+
+ ret = clk_prepare_enable(__scm->core_clk);
+ if (ret)
+ goto bail;
+
+ ret = clk_prepare_enable(__scm->iface_clk);
+ if (ret)
+ goto disable_core;
+
+ ret = clk_prepare_enable(__scm->bus_clk);
+ if (ret)
+ goto disable_iface;
+
+ return 0;
+
+disable_iface:
+ clk_disable_unprepare(__scm->iface_clk);
+disable_core:
+ clk_disable_unprepare(__scm->core_clk);
+bail:
+ return ret;
+}
+
+static void qcom_scm_clk_disable(void)
+{
+ clk_disable_unprepare(__scm->core_clk);
+ clk_disable_unprepare(__scm->iface_clk);
+ clk_disable_unprepare(__scm->bus_clk);
+}
+
/**
* qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
* @entry: Entry point function for the cpus
@@ -47,7 +92,7 @@ EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
*/
int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
{
- return __qcom_scm_set_warm_boot_addr(entry, cpus);
+ return __qcom_scm_set_warm_boot_addr(__scm->dev, entry, cpus);
}
EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
@@ -72,12 +117,17 @@ EXPORT_SYMBOL(qcom_scm_cpu_power_down);
*/
bool qcom_scm_hdcp_available(void)
{
- int ret;
+ int ret = qcom_scm_clk_enable();
- ret = __qcom_scm_is_call_available(QCOM_SCM_SVC_HDCP,
- QCOM_SCM_CMD_HDCP);
+ if (ret)
+ return ret;
- return (ret > 0) ? true : false;
+ ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_HDCP,
+ QCOM_SCM_CMD_HDCP);
+
+ qcom_scm_clk_disable();
+
+ return ret > 0 ? true : false;
}
EXPORT_SYMBOL(qcom_scm_hdcp_available);
@@ -91,6 +141,287 @@ EXPORT_SYMBOL(qcom_scm_hdcp_available);
*/
int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
{
- return __qcom_scm_hdcp_req(req, req_cnt, resp);
+ int ret = qcom_scm_clk_enable();
+
+ if (ret)
+ return ret;
+
+ ret = __qcom_scm_hdcp_req(__scm->dev, req, req_cnt, resp);
+ qcom_scm_clk_disable();
+ return ret;
}
EXPORT_SYMBOL(qcom_scm_hdcp_req);
+
+/**
+ * qcom_scm_pas_supported() - Check if the peripheral authentication service is
+ * available for the given peripherial
+ * @peripheral: peripheral id
+ *
+ * Returns true if PAS is supported for this peripheral, otherwise false.
+ */
+bool qcom_scm_pas_supported(u32 peripheral)
+{
+ int ret;
+
+ ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL,
+ QCOM_SCM_PAS_IS_SUPPORTED_CMD);
+ if (ret <= 0)
+ return false;
+
+ return __qcom_scm_pas_supported(__scm->dev, peripheral);
+}
+EXPORT_SYMBOL(qcom_scm_pas_supported);
+
+/**
+ * qcom_scm_pas_init_image() - Initialize peripheral authentication service
+ * state machine for a given peripheral, using the
+ * metadata
+ * @peripheral: peripheral id
+ * @metadata: pointer to memory containing ELF header, program header table
+ * and optional blob of data used for authenticating the metadata
+ * and the rest of the firmware
+ * @size: size of the metadata
+ *
+ * Returns 0 on success.
+ */
+int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size)
+{
+ dma_addr_t mdata_phys;
+ void *mdata_buf;
+ int ret;
+
+ /*
+ * During the scm call memory protection will be enabled for the meta
+ * data blob, so make sure it's physically contiguous, 4K aligned and
+ * non-cachable to avoid XPU violations.
+ */
+ mdata_buf = dma_alloc_coherent(__scm->dev, size, &mdata_phys,
+ GFP_KERNEL);
+ if (!mdata_buf) {
+ dev_err(__scm->dev, "Allocation of metadata buffer failed.\n");
+ return -ENOMEM;
+ }
+ memcpy(mdata_buf, metadata, size);
+
+ ret = qcom_scm_clk_enable();
+ if (ret)
+ goto free_metadata;
+
+ ret = __qcom_scm_pas_init_image(__scm->dev, peripheral, mdata_phys);
+
+ qcom_scm_clk_disable();
+
+free_metadata:
+ dma_free_coherent(__scm->dev, size, mdata_buf, mdata_phys);
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_scm_pas_init_image);
+
+/**
+ * qcom_scm_pas_mem_setup() - Prepare the memory related to a given peripheral
+ * for firmware loading
+ * @peripheral: peripheral id
+ * @addr: start address of memory area to prepare
+ * @size: size of the memory area to prepare
+ *
+ * Returns 0 on success.
+ */
+int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, phys_addr_t size)
+{
+ int ret;
+
+ ret = qcom_scm_clk_enable();
+ if (ret)
+ return ret;
+
+ ret = __qcom_scm_pas_mem_setup(__scm->dev, peripheral, addr, size);
+ qcom_scm_clk_disable();
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_scm_pas_mem_setup);
+
+/**
+ * qcom_scm_pas_auth_and_reset() - Authenticate the given peripheral firmware
+ * and reset the remote processor
+ * @peripheral: peripheral id
+ *
+ * Return 0 on success.
+ */
+int qcom_scm_pas_auth_and_reset(u32 peripheral)
+{
+ int ret;
+
+ ret = qcom_scm_clk_enable();
+ if (ret)
+ return ret;
+
+ ret = __qcom_scm_pas_auth_and_reset(__scm->dev, peripheral);
+ qcom_scm_clk_disable();
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_scm_pas_auth_and_reset);
+
+/**
+ * qcom_scm_pas_shutdown() - Shut down the remote processor
+ * @peripheral: peripheral id
+ *
+ * Returns 0 on success.
+ */
+int qcom_scm_pas_shutdown(u32 peripheral)
+{
+ int ret;
+
+ ret = qcom_scm_clk_enable();
+ if (ret)
+ return ret;
+
+ ret = __qcom_scm_pas_shutdown(__scm->dev, peripheral);
+ qcom_scm_clk_disable();
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_scm_pas_shutdown);
+
+static int qcom_scm_pas_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long idx)
+{
+ if (idx != 0)
+ return -EINVAL;
+
+ return __qcom_scm_pas_mss_reset(__scm->dev, 1);
+}
+
+static int qcom_scm_pas_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long idx)
+{
+ if (idx != 0)
+ return -EINVAL;
+
+ return __qcom_scm_pas_mss_reset(__scm->dev, 0);
+}
+
+static const struct reset_control_ops qcom_scm_pas_reset_ops = {
+ .assert = qcom_scm_pas_reset_assert,
+ .deassert = qcom_scm_pas_reset_deassert,
+};
+
+/**
+ * qcom_scm_is_available() - Checks if SCM is available
+ */
+bool qcom_scm_is_available(void)
+{
+ return !!__scm;
+}
+EXPORT_SYMBOL(qcom_scm_is_available);
+
+static int qcom_scm_probe(struct platform_device *pdev)
+{
+ struct qcom_scm *scm;
+ int ret;
+
+ scm = devm_kzalloc(&pdev->dev, sizeof(*scm), GFP_KERNEL);
+ if (!scm)
+ return -ENOMEM;
+
+ scm->core_clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(scm->core_clk)) {
+ if (PTR_ERR(scm->core_clk) == -EPROBE_DEFER)
+ return PTR_ERR(scm->core_clk);
+
+ scm->core_clk = NULL;
+ }
+
+ if (of_device_is_compatible(pdev->dev.of_node, "qcom,scm")) {
+ scm->iface_clk = devm_clk_get(&pdev->dev, "iface");
+ if (IS_ERR(scm->iface_clk)) {
+ if (PTR_ERR(scm->iface_clk) != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "failed to acquire iface clk\n");
+ return PTR_ERR(scm->iface_clk);
+ }
+
+ scm->bus_clk = devm_clk_get(&pdev->dev, "bus");
+ if (IS_ERR(scm->bus_clk)) {
+ if (PTR_ERR(scm->bus_clk) != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "failed to acquire bus clk\n");
+ return PTR_ERR(scm->bus_clk);
+ }
+ }
+
+ scm->reset.ops = &qcom_scm_pas_reset_ops;
+ scm->reset.nr_resets = 1;
+ scm->reset.of_node = pdev->dev.of_node;
+ reset_controller_register(&scm->reset);
+
+ /* vote for max clk rate for highest performance */
+ ret = clk_set_rate(scm->core_clk, INT_MAX);
+ if (ret)
+ return ret;
+
+ __scm = scm;
+ __scm->dev = &pdev->dev;
+
+ __qcom_scm_init();
+
+ return 0;
+}
+
+static const struct of_device_id qcom_scm_dt_match[] = {
+ { .compatible = "qcom,scm-apq8064",},
+ { .compatible = "qcom,scm-msm8660",},
+ { .compatible = "qcom,scm-msm8960",},
+ { .compatible = "qcom,scm",},
+ {}
+};
+
+MODULE_DEVICE_TABLE(of, qcom_scm_dt_match);
+
+static struct platform_driver qcom_scm_driver = {
+ .driver = {
+ .name = "qcom_scm",
+ .of_match_table = qcom_scm_dt_match,
+ },
+ .probe = qcom_scm_probe,
+};
+
+static int __init qcom_scm_init(void)
+{
+ struct device_node *np, *fw_np;
+ int ret;
+
+ fw_np = of_find_node_by_name(NULL, "firmware");
+
+ if (!fw_np)
+ return -ENODEV;
+
+ np = of_find_matching_node(fw_np, qcom_scm_dt_match);
+
+ if (!np) {
+ of_node_put(fw_np);
+ return -ENODEV;
+ }
+
+ of_node_put(np);
+
+ ret = of_platform_populate(fw_np, qcom_scm_dt_match, NULL, NULL);
+
+ of_node_put(fw_np);
+
+ if (ret)
+ return ret;
+
+ return platform_driver_register(&qcom_scm_driver);
+}
+
+subsys_initcall(qcom_scm_init);
+
+static void __exit qcom_scm_exit(void)
+{
+ platform_driver_unregister(&qcom_scm_driver);
+}
+module_exit(qcom_scm_exit);
+
+MODULE_DESCRIPTION("Qualcomm SCM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index 2cce75c08b99..3584b00fe7e6 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -19,7 +19,8 @@
#define QCOM_SCM_FLAG_HLOS 0x01
#define QCOM_SCM_FLAG_COLDBOOT_MC 0x02
#define QCOM_SCM_FLAG_WARMBOOT_MC 0x04
-extern int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
+extern int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
+ const cpumask_t *cpus);
extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
#define QCOM_SCM_CMD_TERMINATE_PC 0x2
@@ -29,14 +30,34 @@ extern void __qcom_scm_cpu_power_down(u32 flags);
#define QCOM_SCM_SVC_INFO 0x6
#define QCOM_IS_CALL_AVAIL_CMD 0x1
-extern int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id);
+extern int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
+ u32 cmd_id);
#define QCOM_SCM_SVC_HDCP 0x11
#define QCOM_SCM_CMD_HDCP 0x01
-extern int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
- u32 *resp);
+extern int __qcom_scm_hdcp_req(struct device *dev,
+ struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp);
+
+extern void __qcom_scm_init(void);
+
+#define QCOM_SCM_SVC_PIL 0x2
+#define QCOM_SCM_PAS_INIT_IMAGE_CMD 0x1
+#define QCOM_SCM_PAS_MEM_SETUP_CMD 0x2
+#define QCOM_SCM_PAS_AUTH_AND_RESET_CMD 0x5
+#define QCOM_SCM_PAS_SHUTDOWN_CMD 0x6
+#define QCOM_SCM_PAS_IS_SUPPORTED_CMD 0x7
+#define QCOM_SCM_PAS_MSS_RESET 0xa
+extern bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral);
+extern int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
+ dma_addr_t metadata_phys);
+extern int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
+ phys_addr_t addr, phys_addr_t size);
+extern int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral);
+extern int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral);
+extern int __qcom_scm_pas_mss_reset(struct device *dev, bool reset);
/* common error codes */
+#define QCOM_SCM_V2_EBUSY -12
#define QCOM_SCM_ENOMEM -5
#define QCOM_SCM_EOPNOTSUPP -4
#define QCOM_SCM_EINVAL_ADDR -3
@@ -44,4 +65,22 @@ extern int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
#define QCOM_SCM_ERROR -1
#define QCOM_SCM_INTERRUPTED 1
+static inline int qcom_scm_remap_error(int err)
+{
+ switch (err) {
+ case QCOM_SCM_ERROR:
+ return -EIO;
+ case QCOM_SCM_EINVAL_ADDR:
+ case QCOM_SCM_EINVAL_ARG:
+ return -EINVAL;
+ case QCOM_SCM_EOPNOTSUPP:
+ return -EOPNOTSUPP;
+ case QCOM_SCM_ENOMEM:
+ return -ENOMEM;
+ case QCOM_SCM_V2_EBUSY:
+ return -EBUSY;
+ }
+ return -EINVAL;
+}
+
#endif
diff --git a/drivers/firmware/scpi_pm_domain.c b/drivers/firmware/scpi_pm_domain.c
new file mode 100644
index 000000000000..f395dec27113
--- /dev/null
+++ b/drivers/firmware/scpi_pm_domain.c
@@ -0,0 +1,163 @@
+/*
+ * SCPI Generic power domain support.
+ *
+ * Copyright (C) 2016 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/pm_domain.h>
+#include <linux/scpi_protocol.h>
+
+struct scpi_pm_domain {
+ struct generic_pm_domain genpd;
+ struct scpi_ops *ops;
+ u32 domain;
+ char name[30];
+};
+
+/*
+ * These device power state values are not well-defined in the specification.
+ * In case, different implementations use different values, we can make these
+ * specific to compatibles rather than getting these values from device tree.
+ */
+enum scpi_power_domain_state {
+ SCPI_PD_STATE_ON = 0,
+ SCPI_PD_STATE_OFF = 3,
+};
+
+#define to_scpi_pd(gpd) container_of(gpd, struct scpi_pm_domain, genpd)
+
+static int scpi_pd_power(struct scpi_pm_domain *pd, bool power_on)
+{
+ int ret;
+ enum scpi_power_domain_state state;
+
+ if (power_on)
+ state = SCPI_PD_STATE_ON;
+ else
+ state = SCPI_PD_STATE_OFF;
+
+ ret = pd->ops->device_set_power_state(pd->domain, state);
+ if (ret)
+ return ret;
+
+ return !(state == pd->ops->device_get_power_state(pd->domain));
+}
+
+static int scpi_pd_power_on(struct generic_pm_domain *domain)
+{
+ struct scpi_pm_domain *pd = to_scpi_pd(domain);
+
+ return scpi_pd_power(pd, true);
+}
+
+static int scpi_pd_power_off(struct generic_pm_domain *domain)
+{
+ struct scpi_pm_domain *pd = to_scpi_pd(domain);
+
+ return scpi_pd_power(pd, false);
+}
+
+static int scpi_pm_domain_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct scpi_pm_domain *scpi_pd;
+ struct genpd_onecell_data *scpi_pd_data;
+ struct generic_pm_domain **domains;
+ struct scpi_ops *scpi_ops;
+ int ret, num_domains, i;
+
+ scpi_ops = get_scpi_ops();
+ if (!scpi_ops)
+ return -EPROBE_DEFER;
+
+ if (!np) {
+ dev_err(dev, "device tree node not found\n");
+ return -ENODEV;
+ }
+
+ if (!scpi_ops->device_set_power_state ||
+ !scpi_ops->device_get_power_state) {
+ dev_err(dev, "power domains not supported in the firmware\n");
+ return -ENODEV;
+ }
+
+ ret = of_property_read_u32(np, "num-domains", &num_domains);
+ if (ret) {
+ dev_err(dev, "number of domains not found\n");
+ return -EINVAL;
+ }
+
+ scpi_pd = devm_kcalloc(dev, num_domains, sizeof(*scpi_pd), GFP_KERNEL);
+ if (!scpi_pd)
+ return -ENOMEM;
+
+ scpi_pd_data = devm_kzalloc(dev, sizeof(*scpi_pd_data), GFP_KERNEL);
+ if (!scpi_pd_data)
+ return -ENOMEM;
+
+ domains = devm_kcalloc(dev, num_domains, sizeof(*domains), GFP_KERNEL);
+ if (!domains)
+ return -ENOMEM;
+
+ for (i = 0; i < num_domains; i++, scpi_pd++) {
+ domains[i] = &scpi_pd->genpd;
+
+ scpi_pd->domain = i;
+ scpi_pd->ops = scpi_ops;
+ sprintf(scpi_pd->name, "%s.%d", np->name, i);
+ scpi_pd->genpd.name = scpi_pd->name;
+ scpi_pd->genpd.power_off = scpi_pd_power_off;
+ scpi_pd->genpd.power_on = scpi_pd_power_on;
+
+ /*
+ * Treat all power domains as off at boot.
+ *
+ * The SCP firmware itself may have switched on some domains,
+ * but for reference counting purpose, keep it this way.
+ */
+ pm_genpd_init(&scpi_pd->genpd, NULL, true);
+ }
+
+ scpi_pd_data->domains = domains;
+ scpi_pd_data->num_domains = num_domains;
+
+ of_genpd_add_provider_onecell(np, scpi_pd_data);
+
+ return 0;
+}
+
+static const struct of_device_id scpi_power_domain_ids[] = {
+ { .compatible = "arm,scpi-power-domains", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, scpi_power_domain_ids);
+
+static struct platform_driver scpi_power_domain_driver = {
+ .driver = {
+ .name = "scpi_power_domain",
+ .of_match_table = scpi_power_domain_ids,
+ },
+ .probe = scpi_pm_domain_probe,
+};
+module_platform_driver(scpi_power_domain_driver);
+
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCPI power domain driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/keyboard/clps711x-keypad.c b/drivers/input/keyboard/clps711x-keypad.c
index b637f1af842e..997e3e97f573 100644
--- a/drivers/input/keyboard/clps711x-keypad.c
+++ b/drivers/input/keyboard/clps711x-keypad.c
@@ -101,7 +101,7 @@ static int clps711x_keypad_probe(struct platform_device *pdev)
return -ENOMEM;
priv->syscon =
- syscon_regmap_lookup_by_compatible("cirrus,clps711x-syscon1");
+ syscon_regmap_lookup_by_compatible("cirrus,ep7209-syscon1");
if (IS_ERR(priv->syscon))
return PTR_ERR(priv->syscon);
@@ -181,7 +181,7 @@ static int clps711x_keypad_remove(struct platform_device *pdev)
}
static const struct of_device_id clps711x_keypad_of_match[] = {
- { .compatible = "cirrus,clps711x-keypad", },
+ { .compatible = "cirrus,ep7209-keypad", },
{ }
};
MODULE_DEVICE_TABLE(of, clps711x_keypad_of_match);
diff --git a/drivers/irqchip/irq-clps711x.c b/drivers/irqchip/irq-clps711x.c
index 2223b3f15d68..f913f4db7ae1 100644
--- a/drivers/irqchip/irq-clps711x.c
+++ b/drivers/irqchip/irq-clps711x.c
@@ -234,5 +234,5 @@ static int __init clps711x_intc_init_dt(struct device_node *np,
return _clps711x_intc_init(np, res.start, resource_size(&res));
}
-IRQCHIP_DECLARE(clps711x, "cirrus,clps711x-intc", clps711x_intc_init_dt);
+IRQCHIP_DECLARE(clps711x, "cirrus,ep7209-intc", clps711x_intc_init_dt);
#endif
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index bd4d68500085..370e16e07867 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -336,7 +336,7 @@ config IR_TTUSBIR
config IR_RX51
tristate "Nokia N900 IR transmitter diode"
- depends on OMAP_DM_TIMER && ARCH_OMAP2PLUS && LIRC && !ARCH_MULTIPLATFORM
+ depends on OMAP_DM_TIMER && PWM_OMAP_DMTIMER && ARCH_OMAP2PLUS && LIRC
---help---
Say Y or M here if you want to enable support for the IR
transmitter diode built in the Nokia N900 (RX51) device.
diff --git a/drivers/media/rc/ir-rx51.c b/drivers/media/rc/ir-rx51.c
index 4e1711a40466..82fb6f2ca011 100644
--- a/drivers/media/rc/ir-rx51.c
+++ b/drivers/media/rc/ir-rx51.c
@@ -12,22 +12,17 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
*/
-
+#include <linux/clk.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/uaccess.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/wait.h>
-
-#include <plat/dmtimer.h>
-#include <plat/clock.h>
+#include <linux/pwm.h>
+#include <linux/of.h>
+#include <linux/hrtimer.h>
#include <media/lirc.h>
#include <media/lirc_dev.h>
@@ -41,100 +36,51 @@
#define WBUF_LEN 256
-#define TIMER_MAX_VALUE 0xffffffff
-
struct lirc_rx51 {
- struct omap_dm_timer *pwm_timer;
- struct omap_dm_timer *pulse_timer;
+ struct pwm_device *pwm;
+ struct hrtimer timer;
struct device *dev;
struct lirc_rx51_platform_data *pdata;
wait_queue_head_t wqueue;
- unsigned long fclk_khz;
unsigned int freq; /* carrier frequency */
unsigned int duty_cycle; /* carrier duty cycle */
- unsigned int irq_num;
- unsigned int match;
int wbuf[WBUF_LEN];
int wbuf_index;
unsigned long device_is_open;
- int pwm_timer_num;
};
-static void lirc_rx51_on(struct lirc_rx51 *lirc_rx51)
+static inline void lirc_rx51_on(struct lirc_rx51 *lirc_rx51)
{
- omap_dm_timer_set_pwm(lirc_rx51->pwm_timer, 0, 1,
- OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE);
+ pwm_enable(lirc_rx51->pwm);
}
-static void lirc_rx51_off(struct lirc_rx51 *lirc_rx51)
+static inline void lirc_rx51_off(struct lirc_rx51 *lirc_rx51)
{
- omap_dm_timer_set_pwm(lirc_rx51->pwm_timer, 0, 1,
- OMAP_TIMER_TRIGGER_NONE);
+ pwm_disable(lirc_rx51->pwm);
}
static int init_timing_params(struct lirc_rx51 *lirc_rx51)
{
- u32 load, match;
+ struct pwm_device *pwm = lirc_rx51->pwm;
+ int duty, period = DIV_ROUND_CLOSEST(NSEC_PER_SEC, lirc_rx51->freq);
- load = -(lirc_rx51->fclk_khz * 1000 / lirc_rx51->freq);
- match = -(lirc_rx51->duty_cycle * -load / 100);
- omap_dm_timer_set_load(lirc_rx51->pwm_timer, 1, load);
- omap_dm_timer_set_match(lirc_rx51->pwm_timer, 1, match);
- omap_dm_timer_write_counter(lirc_rx51->pwm_timer, TIMER_MAX_VALUE - 2);
- omap_dm_timer_start(lirc_rx51->pwm_timer);
- omap_dm_timer_set_int_enable(lirc_rx51->pulse_timer, 0);
- omap_dm_timer_start(lirc_rx51->pulse_timer);
+ duty = DIV_ROUND_CLOSEST(lirc_rx51->duty_cycle * period, 100);
- lirc_rx51->match = 0;
+ pwm_config(pwm, duty, period);
return 0;
}
-#define tics_after(a, b) ((long)(b) - (long)(a) < 0)
-
-static int pulse_timer_set_timeout(struct lirc_rx51 *lirc_rx51, int usec)
+static enum hrtimer_restart lirc_rx51_timer_cb(struct hrtimer *timer)
{
- int counter;
-
- BUG_ON(usec < 0);
-
- if (lirc_rx51->match == 0)
- counter = omap_dm_timer_read_counter(lirc_rx51->pulse_timer);
- else
- counter = lirc_rx51->match;
-
- counter += (u32)(lirc_rx51->fclk_khz * usec / (1000));
- omap_dm_timer_set_match(lirc_rx51->pulse_timer, 1, counter);
- omap_dm_timer_set_int_enable(lirc_rx51->pulse_timer,
- OMAP_TIMER_INT_MATCH);
- if (tics_after(omap_dm_timer_read_counter(lirc_rx51->pulse_timer),
- counter)) {
- return 1;
- }
- return 0;
-}
-
-static irqreturn_t lirc_rx51_interrupt_handler(int irq, void *ptr)
-{
- unsigned int retval;
- struct lirc_rx51 *lirc_rx51 = ptr;
-
- retval = omap_dm_timer_read_status(lirc_rx51->pulse_timer);
- if (!retval)
- return IRQ_NONE;
+ struct lirc_rx51 *lirc_rx51 =
+ container_of(timer, struct lirc_rx51, timer);
+ ktime_t now;
- if (retval & ~OMAP_TIMER_INT_MATCH)
- dev_err_ratelimited(lirc_rx51->dev,
- ": Unexpected interrupt source: %x\n", retval);
-
- omap_dm_timer_write_status(lirc_rx51->pulse_timer,
- OMAP_TIMER_INT_MATCH |
- OMAP_TIMER_INT_OVERFLOW |
- OMAP_TIMER_INT_CAPTURE);
if (lirc_rx51->wbuf_index < 0) {
dev_err_ratelimited(lirc_rx51->dev,
- ": BUG wbuf_index has value of %i\n",
+ "BUG wbuf_index has value of %i\n",
lirc_rx51->wbuf_index);
goto end;
}
@@ -144,6 +90,8 @@ static irqreturn_t lirc_rx51_interrupt_handler(int irq, void *ptr)
* pulses until we catch up.
*/
do {
+ u64 ns;
+
if (lirc_rx51->wbuf_index >= WBUF_LEN)
goto end;
if (lirc_rx51->wbuf[lirc_rx51->wbuf_index] == -1)
@@ -154,84 +102,24 @@ static irqreturn_t lirc_rx51_interrupt_handler(int irq, void *ptr)
else
lirc_rx51_on(lirc_rx51);
- retval = pulse_timer_set_timeout(lirc_rx51,
- lirc_rx51->wbuf[lirc_rx51->wbuf_index]);
+ ns = 1000 * lirc_rx51->wbuf[lirc_rx51->wbuf_index];
+ hrtimer_add_expires_ns(timer, ns);
+
lirc_rx51->wbuf_index++;
- } while (retval);
+ now = timer->base->get_time();
+
+ } while (hrtimer_get_expires_tv64(timer) < now.tv64);
- return IRQ_HANDLED;
+ return HRTIMER_RESTART;
end:
/* Stop TX here */
lirc_rx51_off(lirc_rx51);
lirc_rx51->wbuf_index = -1;
- omap_dm_timer_stop(lirc_rx51->pwm_timer);
- omap_dm_timer_stop(lirc_rx51->pulse_timer);
- omap_dm_timer_set_int_enable(lirc_rx51->pulse_timer, 0);
- wake_up_interruptible(&lirc_rx51->wqueue);
-
- return IRQ_HANDLED;
-}
-
-static int lirc_rx51_init_port(struct lirc_rx51 *lirc_rx51)
-{
- struct clk *clk_fclk;
- int retval, pwm_timer = lirc_rx51->pwm_timer_num;
-
- lirc_rx51->pwm_timer = omap_dm_timer_request_specific(pwm_timer);
- if (lirc_rx51->pwm_timer == NULL) {
- dev_err(lirc_rx51->dev, ": Error requesting GPT%d timer\n",
- pwm_timer);
- return -EBUSY;
- }
-
- lirc_rx51->pulse_timer = omap_dm_timer_request();
- if (lirc_rx51->pulse_timer == NULL) {
- dev_err(lirc_rx51->dev, ": Error requesting pulse timer\n");
- retval = -EBUSY;
- goto err1;
- }
-
- omap_dm_timer_set_source(lirc_rx51->pwm_timer, OMAP_TIMER_SRC_SYS_CLK);
- omap_dm_timer_set_source(lirc_rx51->pulse_timer,
- OMAP_TIMER_SRC_SYS_CLK);
-
- omap_dm_timer_enable(lirc_rx51->pwm_timer);
- omap_dm_timer_enable(lirc_rx51->pulse_timer);
-
- lirc_rx51->irq_num = omap_dm_timer_get_irq(lirc_rx51->pulse_timer);
- retval = request_irq(lirc_rx51->irq_num, lirc_rx51_interrupt_handler,
- IRQF_SHARED, "lirc_pulse_timer", lirc_rx51);
- if (retval) {
- dev_err(lirc_rx51->dev, ": Failed to request interrupt line\n");
- goto err2;
- }
-
- clk_fclk = omap_dm_timer_get_fclk(lirc_rx51->pwm_timer);
- lirc_rx51->fclk_khz = clk_fclk->rate / 1000;
-
- return 0;
-err2:
- omap_dm_timer_free(lirc_rx51->pulse_timer);
-err1:
- omap_dm_timer_free(lirc_rx51->pwm_timer);
-
- return retval;
-}
-
-static int lirc_rx51_free_port(struct lirc_rx51 *lirc_rx51)
-{
- omap_dm_timer_set_int_enable(lirc_rx51->pulse_timer, 0);
- free_irq(lirc_rx51->irq_num, lirc_rx51);
- lirc_rx51_off(lirc_rx51);
- omap_dm_timer_disable(lirc_rx51->pwm_timer);
- omap_dm_timer_disable(lirc_rx51->pulse_timer);
- omap_dm_timer_free(lirc_rx51->pwm_timer);
- omap_dm_timer_free(lirc_rx51->pulse_timer);
- lirc_rx51->wbuf_index = -1;
+ wake_up_interruptible(&lirc_rx51->wqueue);
- return 0;
+ return HRTIMER_NORESTART;
}
static ssize_t lirc_rx51_write(struct file *file, const char *buf,
@@ -270,8 +158,9 @@ static ssize_t lirc_rx51_write(struct file *file, const char *buf,
lirc_rx51_on(lirc_rx51);
lirc_rx51->wbuf_index = 1;
- pulse_timer_set_timeout(lirc_rx51, lirc_rx51->wbuf[0]);
-
+ hrtimer_start(&lirc_rx51->timer,
+ ns_to_ktime(1000 * lirc_rx51->wbuf[0]),
+ HRTIMER_MODE_REL);
/*
* Don't return back to the userspace until the transfer has
* finished
@@ -371,14 +260,24 @@ static int lirc_rx51_open(struct inode *inode, struct file *file)
if (test_and_set_bit(1, &lirc_rx51->device_is_open))
return -EBUSY;
- return lirc_rx51_init_port(lirc_rx51);
+ lirc_rx51->pwm = pwm_get(lirc_rx51->dev, NULL);
+ if (IS_ERR(lirc_rx51->pwm)) {
+ int res = PTR_ERR(lirc_rx51->pwm);
+
+ dev_err(lirc_rx51->dev, "pwm_get failed: %d\n", res);
+ return res;
+ }
+
+ return 0;
}
static int lirc_rx51_release(struct inode *inode, struct file *file)
{
struct lirc_rx51 *lirc_rx51 = file->private_data;
- lirc_rx51_free_port(lirc_rx51);
+ hrtimer_cancel(&lirc_rx51->timer);
+ lirc_rx51_off(lirc_rx51);
+ pwm_put(lirc_rx51->pwm);
clear_bit(1, &lirc_rx51->device_is_open);
@@ -386,7 +285,6 @@ static int lirc_rx51_release(struct inode *inode, struct file *file)
}
static struct lirc_rx51 lirc_rx51 = {
- .freq = 38000,
.duty_cycle = 50,
.wbuf_index = -1,
};
@@ -444,9 +342,32 @@ static int lirc_rx51_resume(struct platform_device *dev)
static int lirc_rx51_probe(struct platform_device *dev)
{
+ struct pwm_device *pwm;
+
lirc_rx51_driver.features = LIRC_RX51_DRIVER_FEATURES;
lirc_rx51.pdata = dev->dev.platform_data;
- lirc_rx51.pwm_timer_num = lirc_rx51.pdata->pwm_timer;
+
+ if (!lirc_rx51.pdata) {
+ dev_err(&dev->dev, "Platform Data is missing\n");
+ return -ENXIO;
+ }
+
+ pwm = pwm_get(&dev->dev, NULL);
+ if (IS_ERR(pwm)) {
+ int err = PTR_ERR(pwm);
+
+ if (err != -EPROBE_DEFER)
+ dev_err(&dev->dev, "pwm_get failed: %d\n", err);
+ return err;
+ }
+
+ /* Use default, in case userspace does not set the carrier */
+ lirc_rx51.freq = DIV_ROUND_CLOSEST(pwm_get_period(pwm), NSEC_PER_SEC);
+ pwm_put(pwm);
+
+ hrtimer_init(&lirc_rx51.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ lirc_rx51.timer.function = lirc_rx51_timer_cb;
+
lirc_rx51.dev = &dev->dev;
lirc_rx51_driver.dev = &dev->dev;
lirc_rx51_driver.minor = lirc_register_driver(&lirc_rx51_driver);
@@ -457,8 +378,6 @@ static int lirc_rx51_probe(struct platform_device *dev)
lirc_rx51_driver.minor);
return lirc_rx51_driver.minor;
}
- dev_info(lirc_rx51.dev, "registration ok, minor: %d, pwm: %d\n",
- lirc_rx51_driver.minor, lirc_rx51.pwm_timer_num);
return 0;
}
@@ -468,6 +387,14 @@ static int lirc_rx51_remove(struct platform_device *dev)
return lirc_unregister_driver(lirc_rx51_driver.minor);
}
+static const struct of_device_id lirc_rx51_match[] = {
+ {
+ .compatible = "nokia,n900-ir",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, lirc_rx51_match);
+
struct platform_driver lirc_rx51_platform_driver = {
.probe = lirc_rx51_probe,
.remove = lirc_rx51_remove,
@@ -475,7 +402,7 @@ struct platform_driver lirc_rx51_platform_driver = {
.resume = lirc_rx51_resume,
.driver = {
.name = DRIVER_NAME,
- .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(lirc_rx51_match),
},
};
module_platform_driver(lirc_rx51_platform_driver);
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index 81ddb17575a9..133712346911 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -25,6 +25,17 @@ config ATMEL_SDRAMC
Starting with the at91sam9g45, this controller supports SDR, DDR and
LP-DDR memories.
+config ATMEL_EBI
+ bool "Atmel EBI driver"
+ default y
+ depends on ARCH_AT91 && OF
+ select MFD_SYSCON
+ help
+ Driver for Atmel EBI controller.
+ Used to configure the EBI (external bus interface) when the device-
+ tree is used. This bus supports NANDs, external ethernet controller,
+ SRAMs, ATA devices, etc.
+
config TI_AEMIF
tristate "Texas Instruments AEMIF driver"
depends on (ARCH_DAVINCI || ARCH_KEYSTONE) && OF
diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
index cb0b7a1df11a..b20ae38b5bfb 100644
--- a/drivers/memory/Makefile
+++ b/drivers/memory/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_OF) += of_memory.o
endif
obj-$(CONFIG_ARM_PL172_MPMC) += pl172.o
obj-$(CONFIG_ATMEL_SDRAMC) += atmel-sdramc.o
+obj-$(CONFIG_ATMEL_EBI) += atmel-ebi.o
obj-$(CONFIG_TI_AEMIF) += ti-aemif.o
obj-$(CONFIG_TI_EMIF) += emif.o
obj-$(CONFIG_OMAP_GPMC) += omap-gpmc.o
diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c
new file mode 100644
index 000000000000..f87ad6f5d2dc
--- /dev/null
+++ b/drivers/memory/atmel-ebi.c
@@ -0,0 +1,766 @@
+/*
+ * EBI driver for Atmel chips
+ * inspired by the fsl weim bus driver
+ *
+ * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/atmel-matrix.h>
+#include <linux/mfd/syscon/atmel-smc.h>
+#include <linux/init.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+struct at91sam9_smc_timings {
+ u32 ncs_rd_setup_ns;
+ u32 nrd_setup_ns;
+ u32 ncs_wr_setup_ns;
+ u32 nwe_setup_ns;
+ u32 ncs_rd_pulse_ns;
+ u32 nrd_pulse_ns;
+ u32 ncs_wr_pulse_ns;
+ u32 nwe_pulse_ns;
+ u32 nrd_cycle_ns;
+ u32 nwe_cycle_ns;
+ u32 tdf_ns;
+};
+
+struct at91sam9_smc_generic_fields {
+ struct regmap_field *setup;
+ struct regmap_field *pulse;
+ struct regmap_field *cycle;
+ struct regmap_field *mode;
+};
+
+struct at91sam9_ebi_dev_config {
+ struct at91sam9_smc_timings timings;
+ u32 mode;
+};
+
+struct at91_ebi_dev_config {
+ int cs;
+ union {
+ struct at91sam9_ebi_dev_config sam9;
+ };
+};
+
+struct at91_ebi;
+
+struct at91_ebi_dev {
+ struct list_head node;
+ struct at91_ebi *ebi;
+ u32 mode;
+ int numcs;
+ struct at91_ebi_dev_config configs[];
+};
+
+struct at91_ebi_caps {
+ unsigned int available_cs;
+ const struct reg_field *ebi_csa;
+ void (*get_config)(struct at91_ebi_dev *ebid,
+ struct at91_ebi_dev_config *conf);
+ int (*xlate_config)(struct at91_ebi_dev *ebid,
+ struct device_node *configs_np,
+ struct at91_ebi_dev_config *conf);
+ int (*apply_config)(struct at91_ebi_dev *ebid,
+ struct at91_ebi_dev_config *conf);
+ int (*init)(struct at91_ebi *ebi);
+};
+
+struct at91_ebi {
+ struct clk *clk;
+ struct regmap *smc;
+ struct regmap *matrix;
+
+ struct regmap_field *ebi_csa;
+
+ struct device *dev;
+ const struct at91_ebi_caps *caps;
+ struct list_head devs;
+ union {
+ struct at91sam9_smc_generic_fields sam9;
+ };
+};
+
+static void at91sam9_ebi_get_config(struct at91_ebi_dev *ebid,
+ struct at91_ebi_dev_config *conf)
+{
+ struct at91sam9_smc_generic_fields *fields = &ebid->ebi->sam9;
+ unsigned int clk_rate = clk_get_rate(ebid->ebi->clk);
+ struct at91sam9_ebi_dev_config *config = &conf->sam9;
+ struct at91sam9_smc_timings *timings = &config->timings;
+ unsigned int val;
+
+ regmap_fields_read(fields->mode, conf->cs, &val);
+ config->mode = val & ~AT91_SMC_TDF;
+
+ val = (val & AT91_SMC_TDF) >> 16;
+ timings->tdf_ns = clk_rate * val;
+
+ regmap_fields_read(fields->setup, conf->cs, &val);
+ timings->ncs_rd_setup_ns = (val >> 24) & 0x1f;
+ timings->ncs_rd_setup_ns += ((val >> 29) & 0x1) * 128;
+ timings->ncs_rd_setup_ns *= clk_rate;
+ timings->nrd_setup_ns = (val >> 16) & 0x1f;
+ timings->nrd_setup_ns += ((val >> 21) & 0x1) * 128;
+ timings->nrd_setup_ns *= clk_rate;
+ timings->ncs_wr_setup_ns = (val >> 8) & 0x1f;
+ timings->ncs_wr_setup_ns += ((val >> 13) & 0x1) * 128;
+ timings->ncs_wr_setup_ns *= clk_rate;
+ timings->nwe_setup_ns = val & 0x1f;
+ timings->nwe_setup_ns += ((val >> 5) & 0x1) * 128;
+ timings->nwe_setup_ns *= clk_rate;
+
+ regmap_fields_read(fields->pulse, conf->cs, &val);
+ timings->ncs_rd_pulse_ns = (val >> 24) & 0x3f;
+ timings->ncs_rd_pulse_ns += ((val >> 30) & 0x1) * 256;
+ timings->ncs_rd_pulse_ns *= clk_rate;
+ timings->nrd_pulse_ns = (val >> 16) & 0x3f;
+ timings->nrd_pulse_ns += ((val >> 22) & 0x1) * 256;
+ timings->nrd_pulse_ns *= clk_rate;
+ timings->ncs_wr_pulse_ns = (val >> 8) & 0x3f;
+ timings->ncs_wr_pulse_ns += ((val >> 14) & 0x1) * 256;
+ timings->ncs_wr_pulse_ns *= clk_rate;
+ timings->nwe_pulse_ns = val & 0x3f;
+ timings->nwe_pulse_ns += ((val >> 6) & 0x1) * 256;
+ timings->nwe_pulse_ns *= clk_rate;
+
+ regmap_fields_read(fields->cycle, conf->cs, &val);
+ timings->nrd_cycle_ns = (val >> 16) & 0x7f;
+ timings->nrd_cycle_ns += ((val >> 23) & 0x3) * 256;
+ timings->nrd_cycle_ns *= clk_rate;
+ timings->nwe_cycle_ns = val & 0x7f;
+ timings->nwe_cycle_ns += ((val >> 7) & 0x3) * 256;
+ timings->nwe_cycle_ns *= clk_rate;
+}
+
+static int at91_xlate_timing(struct device_node *np, const char *prop,
+ u32 *val, bool *required)
+{
+ if (!of_property_read_u32(np, prop, val)) {
+ *required = true;
+ return 0;
+ }
+
+ if (*required)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int at91sam9_smc_xslate_timings(struct at91_ebi_dev *ebid,
+ struct device_node *np,
+ struct at91sam9_smc_timings *timings,
+ bool *required)
+{
+ int ret;
+
+ ret = at91_xlate_timing(np, "atmel,smc-ncs-rd-setup-ns",
+ &timings->ncs_rd_setup_ns, required);
+ if (ret)
+ goto out;
+
+ ret = at91_xlate_timing(np, "atmel,smc-nrd-setup-ns",
+ &timings->nrd_setup_ns, required);
+ if (ret)
+ goto out;
+
+ ret = at91_xlate_timing(np, "atmel,smc-ncs-wr-setup-ns",
+ &timings->ncs_wr_setup_ns, required);
+ if (ret)
+ goto out;
+
+ ret = at91_xlate_timing(np, "atmel,smc-nwe-setup-ns",
+ &timings->nwe_setup_ns, required);
+ if (ret)
+ goto out;
+
+ ret = at91_xlate_timing(np, "atmel,smc-ncs-rd-pulse-ns",
+ &timings->ncs_rd_pulse_ns, required);
+ if (ret)
+ goto out;
+
+ ret = at91_xlate_timing(np, "atmel,smc-nrd-pulse-ns",
+ &timings->nrd_pulse_ns, required);
+ if (ret)
+ goto out;
+
+ ret = at91_xlate_timing(np, "atmel,smc-ncs-wr-pulse-ns",
+ &timings->ncs_wr_pulse_ns, required);
+ if (ret)
+ goto out;
+
+ ret = at91_xlate_timing(np, "atmel,smc-nwe-pulse-ns",
+ &timings->nwe_pulse_ns, required);
+ if (ret)
+ goto out;
+
+ ret = at91_xlate_timing(np, "atmel,smc-nwe-cycle-ns",
+ &timings->nwe_cycle_ns, required);
+ if (ret)
+ goto out;
+
+ ret = at91_xlate_timing(np, "atmel,smc-nrd-cycle-ns",
+ &timings->nrd_cycle_ns, required);
+ if (ret)
+ goto out;
+
+ ret = at91_xlate_timing(np, "atmel,smc-tdf-ns",
+ &timings->tdf_ns, required);
+
+out:
+ if (ret)
+ dev_err(ebid->ebi->dev,
+ "missing or invalid timings definition in %s",
+ np->full_name);
+
+ return ret;
+}
+
+static int at91sam9_ebi_xslate_config(struct at91_ebi_dev *ebid,
+ struct device_node *np,
+ struct at91_ebi_dev_config *conf)
+{
+ struct at91sam9_ebi_dev_config *config = &conf->sam9;
+ bool required = false;
+ const char *tmp_str;
+ u32 tmp;
+ int ret;
+
+ ret = of_property_read_u32(np, "atmel,smc-bus-width", &tmp);
+ if (!ret) {
+ switch (tmp) {
+ case 8:
+ config->mode |= AT91_SMC_DBW_8;
+ break;
+
+ case 16:
+ config->mode |= AT91_SMC_DBW_16;
+ break;
+
+ case 32:
+ config->mode |= AT91_SMC_DBW_32;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ required = true;
+ }
+
+ if (of_property_read_bool(np, "atmel,smc-tdf-optimized")) {
+ config->mode |= AT91_SMC_TDFMODE_OPTIMIZED;
+ required = true;
+ }
+
+ tmp_str = NULL;
+ of_property_read_string(np, "atmel,smc-byte-access-type", &tmp_str);
+ if (tmp_str && !strcmp(tmp_str, "write")) {
+ config->mode |= AT91_SMC_BAT_WRITE;
+ required = true;
+ }
+
+ tmp_str = NULL;
+ of_property_read_string(np, "atmel,smc-read-mode", &tmp_str);
+ if (tmp_str && !strcmp(tmp_str, "nrd")) {
+ config->mode |= AT91_SMC_READMODE_NRD;
+ required = true;
+ }
+
+ tmp_str = NULL;
+ of_property_read_string(np, "atmel,smc-write-mode", &tmp_str);
+ if (tmp_str && !strcmp(tmp_str, "nwe")) {
+ config->mode |= AT91_SMC_WRITEMODE_NWE;
+ required = true;
+ }
+
+ tmp_str = NULL;
+ of_property_read_string(np, "atmel,smc-exnw-mode", &tmp_str);
+ if (tmp_str) {
+ if (!strcmp(tmp_str, "frozen"))
+ config->mode |= AT91_SMC_EXNWMODE_FROZEN;
+ else if (!strcmp(tmp_str, "ready"))
+ config->mode |= AT91_SMC_EXNWMODE_READY;
+ else if (strcmp(tmp_str, "disabled"))
+ return -EINVAL;
+
+ required = true;
+ }
+
+ ret = of_property_read_u32(np, "atmel,smc-page-mode", &tmp);
+ if (!ret) {
+ switch (tmp) {
+ case 4:
+ config->mode |= AT91_SMC_PS_4;
+ break;
+
+ case 8:
+ config->mode |= AT91_SMC_PS_8;
+ break;
+
+ case 16:
+ config->mode |= AT91_SMC_PS_16;
+ break;
+
+ case 32:
+ config->mode |= AT91_SMC_PS_32;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ config->mode |= AT91_SMC_PMEN;
+ required = true;
+ }
+
+ ret = at91sam9_smc_xslate_timings(ebid, np, &config->timings,
+ &required);
+ if (ret)
+ return ret;
+
+ return required;
+}
+
+static int at91sam9_ebi_apply_config(struct at91_ebi_dev *ebid,
+ struct at91_ebi_dev_config *conf)
+{
+ unsigned int clk_rate = clk_get_rate(ebid->ebi->clk);
+ struct at91sam9_ebi_dev_config *config = &conf->sam9;
+ struct at91sam9_smc_timings *timings = &config->timings;
+ struct at91sam9_smc_generic_fields *fields = &ebid->ebi->sam9;
+ u32 coded_val;
+ u32 val;
+
+ coded_val = at91sam9_smc_setup_ns_to_cycles(clk_rate,
+ timings->ncs_rd_setup_ns);
+ val = AT91SAM9_SMC_NCS_NRDSETUP(coded_val);
+ coded_val = at91sam9_smc_setup_ns_to_cycles(clk_rate,
+ timings->nrd_setup_ns);
+ val |= AT91SAM9_SMC_NRDSETUP(coded_val);
+ coded_val = at91sam9_smc_setup_ns_to_cycles(clk_rate,
+ timings->ncs_wr_setup_ns);
+ val |= AT91SAM9_SMC_NCS_WRSETUP(coded_val);
+ coded_val = at91sam9_smc_setup_ns_to_cycles(clk_rate,
+ timings->nwe_setup_ns);
+ val |= AT91SAM9_SMC_NWESETUP(coded_val);
+ regmap_fields_write(fields->setup, conf->cs, val);
+
+ coded_val = at91sam9_smc_pulse_ns_to_cycles(clk_rate,
+ timings->ncs_rd_pulse_ns);
+ val = AT91SAM9_SMC_NCS_NRDPULSE(coded_val);
+ coded_val = at91sam9_smc_pulse_ns_to_cycles(clk_rate,
+ timings->nrd_pulse_ns);
+ val |= AT91SAM9_SMC_NRDPULSE(coded_val);
+ coded_val = at91sam9_smc_pulse_ns_to_cycles(clk_rate,
+ timings->ncs_wr_pulse_ns);
+ val |= AT91SAM9_SMC_NCS_WRPULSE(coded_val);
+ coded_val = at91sam9_smc_pulse_ns_to_cycles(clk_rate,
+ timings->nwe_pulse_ns);
+ val |= AT91SAM9_SMC_NWEPULSE(coded_val);
+ regmap_fields_write(fields->pulse, conf->cs, val);
+
+ coded_val = at91sam9_smc_cycle_ns_to_cycles(clk_rate,
+ timings->nrd_cycle_ns);
+ val = AT91SAM9_SMC_NRDCYCLE(coded_val);
+ coded_val = at91sam9_smc_cycle_ns_to_cycles(clk_rate,
+ timings->nwe_cycle_ns);
+ val |= AT91SAM9_SMC_NWECYCLE(coded_val);
+ regmap_fields_write(fields->cycle, conf->cs, val);
+
+ val = DIV_ROUND_UP(timings->tdf_ns, clk_rate);
+ if (val > AT91_SMC_TDF_MAX)
+ val = AT91_SMC_TDF_MAX;
+ regmap_fields_write(fields->mode, conf->cs,
+ config->mode | AT91_SMC_TDF_(val));
+
+ return 0;
+}
+
+static int at91sam9_ebi_init(struct at91_ebi *ebi)
+{
+ struct at91sam9_smc_generic_fields *fields = &ebi->sam9;
+ struct reg_field field = REG_FIELD(0, 0, 31);
+
+ field.id_size = fls(ebi->caps->available_cs);
+ field.id_offset = AT91SAM9_SMC_GENERIC_BLK_SZ;
+
+ field.reg = AT91SAM9_SMC_SETUP(AT91SAM9_SMC_GENERIC);
+ fields->setup = devm_regmap_field_alloc(ebi->dev, ebi->smc, field);
+ if (IS_ERR(fields->setup))
+ return PTR_ERR(fields->setup);
+
+ field.reg = AT91SAM9_SMC_PULSE(AT91SAM9_SMC_GENERIC);
+ fields->pulse = devm_regmap_field_alloc(ebi->dev, ebi->smc, field);
+ if (IS_ERR(fields->pulse))
+ return PTR_ERR(fields->pulse);
+
+ field.reg = AT91SAM9_SMC_CYCLE(AT91SAM9_SMC_GENERIC);
+ fields->cycle = devm_regmap_field_alloc(ebi->dev, ebi->smc, field);
+ if (IS_ERR(fields->cycle))
+ return PTR_ERR(fields->cycle);
+
+ field.reg = AT91SAM9_SMC_MODE(AT91SAM9_SMC_GENERIC);
+ fields->mode = devm_regmap_field_alloc(ebi->dev, ebi->smc, field);
+ if (IS_ERR(fields->mode))
+ return PTR_ERR(fields->mode);
+
+ return 0;
+}
+
+static int sama5d3_ebi_init(struct at91_ebi *ebi)
+{
+ struct at91sam9_smc_generic_fields *fields = &ebi->sam9;
+ struct reg_field field = REG_FIELD(0, 0, 31);
+
+ field.id_size = fls(ebi->caps->available_cs);
+ field.id_offset = SAMA5_SMC_GENERIC_BLK_SZ;
+
+ field.reg = AT91SAM9_SMC_SETUP(SAMA5_SMC_GENERIC);
+ fields->setup = devm_regmap_field_alloc(ebi->dev, ebi->smc, field);
+ if (IS_ERR(fields->setup))
+ return PTR_ERR(fields->setup);
+
+ field.reg = AT91SAM9_SMC_PULSE(SAMA5_SMC_GENERIC);
+ fields->pulse = devm_regmap_field_alloc(ebi->dev, ebi->smc, field);
+ if (IS_ERR(fields->pulse))
+ return PTR_ERR(fields->pulse);
+
+ field.reg = AT91SAM9_SMC_CYCLE(SAMA5_SMC_GENERIC);
+ fields->cycle = devm_regmap_field_alloc(ebi->dev, ebi->smc, field);
+ if (IS_ERR(fields->cycle))
+ return PTR_ERR(fields->cycle);
+
+ field.reg = SAMA5_SMC_MODE(SAMA5_SMC_GENERIC);
+ fields->mode = devm_regmap_field_alloc(ebi->dev, ebi->smc, field);
+ if (IS_ERR(fields->mode))
+ return PTR_ERR(fields->mode);
+
+ return 0;
+}
+
+static int at91_ebi_dev_setup(struct at91_ebi *ebi, struct device_node *np,
+ int reg_cells)
+{
+ const struct at91_ebi_caps *caps = ebi->caps;
+ struct at91_ebi_dev_config conf = { };
+ struct device *dev = ebi->dev;
+ struct at91_ebi_dev *ebid;
+ int ret, numcs = 0, i;
+ bool apply = false;
+
+ numcs = of_property_count_elems_of_size(np, "reg",
+ reg_cells * sizeof(u32));
+ if (numcs <= 0) {
+ dev_err(dev, "invalid reg property in %s\n", np->full_name);
+ return -EINVAL;
+ }
+
+ ebid = devm_kzalloc(ebi->dev,
+ sizeof(*ebid) + (numcs * sizeof(*ebid->configs)),
+ GFP_KERNEL);
+ if (!ebid)
+ return -ENOMEM;
+
+ ebid->ebi = ebi;
+
+ ret = caps->xlate_config(ebid, np, &conf);
+ if (ret < 0)
+ return ret;
+ else if (ret)
+ apply = true;
+
+ for (i = 0; i < numcs; i++) {
+ u32 cs;
+
+ ret = of_property_read_u32_index(np, "reg", i * reg_cells,
+ &cs);
+ if (ret)
+ return ret;
+
+ if (cs > AT91_MATRIX_EBI_NUM_CS ||
+ !(ebi->caps->available_cs & BIT(cs))) {
+ dev_err(dev, "invalid reg property in %s\n",
+ np->full_name);
+ return -EINVAL;
+ }
+
+ ebid->configs[i].cs = cs;
+
+ if (apply) {
+ conf.cs = cs;
+ ret = caps->apply_config(ebid, &conf);
+ if (ret)
+ return ret;
+ }
+
+ caps->get_config(ebid, &ebid->configs[i]);
+
+ /*
+ * Attach the EBI device to the generic SMC logic if at least
+ * one "atmel,smc-" property is present.
+ */
+ if (ebi->ebi_csa && ret)
+ regmap_field_update_bits(ebi->ebi_csa,
+ BIT(cs), 0);
+ }
+
+ list_add_tail(&ebid->node, &ebi->devs);
+
+ return 0;
+}
+
+static const struct reg_field at91sam9260_ebi_csa =
+ REG_FIELD(AT91SAM9260_MATRIX_EBICSA, 0,
+ AT91_MATRIX_EBI_NUM_CS - 1);
+
+static const struct at91_ebi_caps at91sam9260_ebi_caps = {
+ .available_cs = 0xff,
+ .ebi_csa = &at91sam9260_ebi_csa,
+ .get_config = at91sam9_ebi_get_config,
+ .xlate_config = at91sam9_ebi_xslate_config,
+ .apply_config = at91sam9_ebi_apply_config,
+ .init = at91sam9_ebi_init,
+};
+
+static const struct reg_field at91sam9261_ebi_csa =
+ REG_FIELD(AT91SAM9261_MATRIX_EBICSA, 0,
+ AT91_MATRIX_EBI_NUM_CS - 1);
+
+static const struct at91_ebi_caps at91sam9261_ebi_caps = {
+ .available_cs = 0xff,
+ .ebi_csa = &at91sam9261_ebi_csa,
+ .get_config = at91sam9_ebi_get_config,
+ .xlate_config = at91sam9_ebi_xslate_config,
+ .apply_config = at91sam9_ebi_apply_config,
+ .init = at91sam9_ebi_init,
+};
+
+static const struct reg_field at91sam9263_ebi0_csa =
+ REG_FIELD(AT91SAM9263_MATRIX_EBI0CSA, 0,
+ AT91_MATRIX_EBI_NUM_CS - 1);
+
+static const struct at91_ebi_caps at91sam9263_ebi0_caps = {
+ .available_cs = 0x3f,
+ .ebi_csa = &at91sam9263_ebi0_csa,
+ .get_config = at91sam9_ebi_get_config,
+ .xlate_config = at91sam9_ebi_xslate_config,
+ .apply_config = at91sam9_ebi_apply_config,
+ .init = at91sam9_ebi_init,
+};
+
+static const struct reg_field at91sam9263_ebi1_csa =
+ REG_FIELD(AT91SAM9263_MATRIX_EBI1CSA, 0,
+ AT91_MATRIX_EBI_NUM_CS - 1);
+
+static const struct at91_ebi_caps at91sam9263_ebi1_caps = {
+ .available_cs = 0x7,
+ .ebi_csa = &at91sam9263_ebi1_csa,
+ .get_config = at91sam9_ebi_get_config,
+ .xlate_config = at91sam9_ebi_xslate_config,
+ .apply_config = at91sam9_ebi_apply_config,
+ .init = at91sam9_ebi_init,
+};
+
+static const struct reg_field at91sam9rl_ebi_csa =
+ REG_FIELD(AT91SAM9RL_MATRIX_EBICSA, 0,
+ AT91_MATRIX_EBI_NUM_CS - 1);
+
+static const struct at91_ebi_caps at91sam9rl_ebi_caps = {
+ .available_cs = 0x3f,
+ .ebi_csa = &at91sam9rl_ebi_csa,
+ .get_config = at91sam9_ebi_get_config,
+ .xlate_config = at91sam9_ebi_xslate_config,
+ .apply_config = at91sam9_ebi_apply_config,
+ .init = at91sam9_ebi_init,
+};
+
+static const struct reg_field at91sam9g45_ebi_csa =
+ REG_FIELD(AT91SAM9G45_MATRIX_EBICSA, 0,
+ AT91_MATRIX_EBI_NUM_CS - 1);
+
+static const struct at91_ebi_caps at91sam9g45_ebi_caps = {
+ .available_cs = 0x3f,
+ .ebi_csa = &at91sam9g45_ebi_csa,
+ .get_config = at91sam9_ebi_get_config,
+ .xlate_config = at91sam9_ebi_xslate_config,
+ .apply_config = at91sam9_ebi_apply_config,
+ .init = at91sam9_ebi_init,
+};
+
+static const struct at91_ebi_caps at91sam9x5_ebi_caps = {
+ .available_cs = 0x3f,
+ .ebi_csa = &at91sam9263_ebi0_csa,
+ .get_config = at91sam9_ebi_get_config,
+ .xlate_config = at91sam9_ebi_xslate_config,
+ .apply_config = at91sam9_ebi_apply_config,
+ .init = at91sam9_ebi_init,
+};
+
+static const struct at91_ebi_caps sama5d3_ebi_caps = {
+ .available_cs = 0xf,
+ .get_config = at91sam9_ebi_get_config,
+ .xlate_config = at91sam9_ebi_xslate_config,
+ .apply_config = at91sam9_ebi_apply_config,
+ .init = sama5d3_ebi_init,
+};
+
+static const struct of_device_id at91_ebi_id_table[] = {
+ {
+ .compatible = "atmel,at91sam9260-ebi",
+ .data = &at91sam9260_ebi_caps,
+ },
+ {
+ .compatible = "atmel,at91sam9261-ebi",
+ .data = &at91sam9261_ebi_caps,
+ },
+ {
+ .compatible = "atmel,at91sam9263-ebi0",
+ .data = &at91sam9263_ebi0_caps,
+ },
+ {
+ .compatible = "atmel,at91sam9263-ebi1",
+ .data = &at91sam9263_ebi1_caps,
+ },
+ {
+ .compatible = "atmel,at91sam9rl-ebi",
+ .data = &at91sam9rl_ebi_caps,
+ },
+ {
+ .compatible = "atmel,at91sam9g45-ebi",
+ .data = &at91sam9g45_ebi_caps,
+ },
+ {
+ .compatible = "atmel,at91sam9x5-ebi",
+ .data = &at91sam9x5_ebi_caps,
+ },
+ {
+ .compatible = "atmel,sama5d3-ebi",
+ .data = &sama5d3_ebi_caps,
+ },
+ { /* sentinel */ }
+};
+
+static int at91_ebi_dev_disable(struct at91_ebi *ebi, struct device_node *np)
+{
+ struct device *dev = ebi->dev;
+ struct property *newprop;
+
+ newprop = devm_kzalloc(dev, sizeof(*newprop), GFP_KERNEL);
+ if (!newprop)
+ return -ENOMEM;
+
+ newprop->name = devm_kstrdup(dev, "status", GFP_KERNEL);
+ if (!newprop->name)
+ return -ENOMEM;
+
+ newprop->value = devm_kstrdup(dev, "disabled", GFP_KERNEL);
+ if (!newprop->name)
+ return -ENOMEM;
+
+ newprop->length = sizeof("disabled");
+
+ return of_update_property(np, newprop);
+}
+
+static int at91_ebi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *child, *np = dev->of_node;
+ const struct of_device_id *match;
+ struct at91_ebi *ebi;
+ int ret, reg_cells;
+ struct clk *clk;
+ u32 val;
+
+ match = of_match_device(at91_ebi_id_table, dev);
+ if (!match || !match->data)
+ return -EINVAL;
+
+ ebi = devm_kzalloc(dev, sizeof(*ebi), GFP_KERNEL);
+ if (!ebi)
+ return -ENOMEM;
+
+ INIT_LIST_HEAD(&ebi->devs);
+ ebi->caps = match->data;
+ ebi->dev = dev;
+
+ clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ ebi->clk = clk;
+
+ ebi->smc = syscon_regmap_lookup_by_phandle(np, "atmel,smc");
+ if (IS_ERR(ebi->smc))
+ return PTR_ERR(ebi->smc);
+
+ /*
+ * The sama5d3 does not provide an EBICSA register and thus does need
+ * to access the matrix registers.
+ */
+ if (ebi->caps->ebi_csa) {
+ ebi->matrix =
+ syscon_regmap_lookup_by_phandle(np, "atmel,matrix");
+ if (IS_ERR(ebi->matrix))
+ return PTR_ERR(ebi->matrix);
+
+ ebi->ebi_csa = regmap_field_alloc(ebi->matrix,
+ *ebi->caps->ebi_csa);
+ if (IS_ERR(ebi->ebi_csa))
+ return PTR_ERR(ebi->ebi_csa);
+ }
+
+ ret = ebi->caps->init(ebi);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32(np, "#address-cells", &val);
+ if (ret) {
+ dev_err(dev, "missing #address-cells property\n");
+ return ret;
+ }
+
+ reg_cells = val;
+
+ ret = of_property_read_u32(np, "#size-cells", &val);
+ if (ret) {
+ dev_err(dev, "missing #address-cells property\n");
+ return ret;
+ }
+
+ reg_cells += val;
+
+ for_each_available_child_of_node(np, child) {
+ if (!of_find_property(child, "reg", NULL))
+ continue;
+
+ ret = at91_ebi_dev_setup(ebi, child, reg_cells);
+ if (ret) {
+ dev_err(dev, "failed to configure EBI bus for %s, disabling the device",
+ child->full_name);
+
+ ret = at91_ebi_dev_disable(ebi, child);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return of_platform_populate(np, NULL, NULL, dev);
+}
+
+static struct platform_driver at91_ebi_driver = {
+ .driver = {
+ .name = "atmel-ebi",
+ .of_match_table = at91_ebi_id_table,
+ },
+};
+builtin_platform_driver_probe(at91_ebi_driver, at91_ebi_probe);
diff --git a/drivers/memory/atmel-sdramc.c b/drivers/memory/atmel-sdramc.c
index a3ebc8a87479..53a341f3b305 100644
--- a/drivers/memory/atmel-sdramc.c
+++ b/drivers/memory/atmel-sdramc.c
@@ -1,6 +1,8 @@
/*
* Atmel (Multi-port DDR-)SDRAM Controller driver
*
+ * Author: Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
* Copyright (C) 2014 Atmel
*
* This program is free software: you can redistribute it and/or modify
@@ -20,7 +22,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
@@ -48,7 +50,6 @@ static const struct of_device_id atmel_ramc_of_match[] = {
{ .compatible = "atmel,sama5d3-ddramc", .data = &sama5d3_caps, },
{},
};
-MODULE_DEVICE_TABLE(of, atmel_ramc_of_match);
static int atmel_ramc_probe(struct platform_device *pdev)
{
@@ -90,8 +91,4 @@ static int __init atmel_ramc_init(void)
{
return platform_driver_register(&atmel_ramc_driver);
}
-module_init(atmel_ramc_init);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>");
-MODULE_DESCRIPTION("Atmel (Multi-port DDR-)SDRAM Controller");
+device_initcall(atmel_ramc_init);
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index 4721b591994f..869c83fb3c5d 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -20,7 +20,6 @@
#include <linux/ioport.h>
#include <linux/spinlock.h>
#include <linux/io.h>
-#include <linux/module.h>
#include <linux/gpio/driver.h>
#include <linux/interrupt.h>
#include <linux/irqdomain.h>
@@ -1807,7 +1806,6 @@ static const struct of_device_id gpmc_dt_ids[] = {
{ .compatible = "ti,am3352-gpmc" }, /* am335x devices */
{ }
};
-MODULE_DEVICE_TABLE(of, gpmc_dt_ids);
/**
* gpmc_read_settings_dt - read gpmc settings from device-tree
@@ -2154,68 +2152,6 @@ err:
return ret;
}
-static int gpmc_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
-{
- return 1; /* we're input only */
-}
-
-static int gpmc_gpio_direction_input(struct gpio_chip *chip,
- unsigned int offset)
-{
- return 0; /* we're input only */
-}
-
-static int gpmc_gpio_direction_output(struct gpio_chip *chip,
- unsigned int offset, int value)
-{
- return -EINVAL; /* we're input only */
-}
-
-static void gpmc_gpio_set(struct gpio_chip *chip, unsigned int offset,
- int value)
-{
-}
-
-static int gpmc_gpio_get(struct gpio_chip *chip, unsigned int offset)
-{
- u32 reg;
-
- offset += 8;
-
- reg = gpmc_read_reg(GPMC_STATUS) & BIT(offset);
-
- return !!reg;
-}
-
-static int gpmc_gpio_init(struct gpmc_device *gpmc)
-{
- int ret;
-
- gpmc->gpio_chip.parent = gpmc->dev;
- gpmc->gpio_chip.owner = THIS_MODULE;
- gpmc->gpio_chip.label = DEVICE_NAME;
- gpmc->gpio_chip.ngpio = gpmc_nr_waitpins;
- gpmc->gpio_chip.get_direction = gpmc_gpio_get_direction;
- gpmc->gpio_chip.direction_input = gpmc_gpio_direction_input;
- gpmc->gpio_chip.direction_output = gpmc_gpio_direction_output;
- gpmc->gpio_chip.set = gpmc_gpio_set;
- gpmc->gpio_chip.get = gpmc_gpio_get;
- gpmc->gpio_chip.base = -1;
-
- ret = gpiochip_add(&gpmc->gpio_chip);
- if (ret < 0) {
- dev_err(gpmc->dev, "could not register gpio chip: %d\n", ret);
- return ret;
- }
-
- return 0;
-}
-
-static void gpmc_gpio_exit(struct gpmc_device *gpmc)
-{
- gpiochip_remove(&gpmc->gpio_chip);
-}
-
static int gpmc_probe_dt(struct platform_device *pdev)
{
int ret;
@@ -2280,7 +2216,69 @@ static int gpmc_probe_dt_children(struct platform_device *pdev)
{
return 0;
}
-#endif
+#endif /* CONFIG_OF */
+
+static int gpmc_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+ return 1; /* we're input only */
+}
+
+static int gpmc_gpio_direction_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ return 0; /* we're input only */
+}
+
+static int gpmc_gpio_direction_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ return -EINVAL; /* we're input only */
+}
+
+static void gpmc_gpio_set(struct gpio_chip *chip, unsigned int offset,
+ int value)
+{
+}
+
+static int gpmc_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ u32 reg;
+
+ offset += 8;
+
+ reg = gpmc_read_reg(GPMC_STATUS) & BIT(offset);
+
+ return !!reg;
+}
+
+static int gpmc_gpio_init(struct gpmc_device *gpmc)
+{
+ int ret;
+
+ gpmc->gpio_chip.parent = gpmc->dev;
+ gpmc->gpio_chip.owner = THIS_MODULE;
+ gpmc->gpio_chip.label = DEVICE_NAME;
+ gpmc->gpio_chip.ngpio = gpmc_nr_waitpins;
+ gpmc->gpio_chip.get_direction = gpmc_gpio_get_direction;
+ gpmc->gpio_chip.direction_input = gpmc_gpio_direction_input;
+ gpmc->gpio_chip.direction_output = gpmc_gpio_direction_output;
+ gpmc->gpio_chip.set = gpmc_gpio_set;
+ gpmc->gpio_chip.get = gpmc_gpio_get;
+ gpmc->gpio_chip.base = -1;
+
+ ret = gpiochip_add(&gpmc->gpio_chip);
+ if (ret < 0) {
+ dev_err(gpmc->dev, "could not register gpio chip: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void gpmc_gpio_exit(struct gpmc_device *gpmc)
+{
+ gpiochip_remove(&gpmc->gpio_chip);
+}
static int gpmc_probe(struct platform_device *pdev)
{
@@ -2436,15 +2434,7 @@ static __init int gpmc_init(void)
{
return platform_driver_register(&gpmc_driver);
}
-
-static __exit void gpmc_exit(void)
-{
- platform_driver_unregister(&gpmc_driver);
-
-}
-
postcore_initcall(gpmc_init);
-module_exit(gpmc_exit);
static struct omap3_gpmc_regs gpmc_context;
diff --git a/drivers/memory/samsung/exynos-srom.c b/drivers/memory/samsung/exynos-srom.c
index 96756fb4d6bd..bf827a666694 100644
--- a/drivers/memory/samsung/exynos-srom.c
+++ b/drivers/memory/samsung/exynos-srom.c
@@ -11,7 +11,7 @@
*/
#include <linux/io.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
@@ -91,17 +91,17 @@ static int exynos_srom_configure_bank(struct exynos_srom *srom,
if (width == 2)
cs |= 1 << EXYNOS_SROM_BW__DATAWIDTH__SHIFT;
- bw = __raw_readl(srom->reg_base + EXYNOS_SROM_BW);
+ bw = readl_relaxed(srom->reg_base + EXYNOS_SROM_BW);
bw = (bw & ~(EXYNOS_SROM_BW__CS_MASK << bank)) | (cs << bank);
- __raw_writel(bw, srom->reg_base + EXYNOS_SROM_BW);
+ writel_relaxed(bw, srom->reg_base + EXYNOS_SROM_BW);
- __raw_writel(pmc | (timing[0] << EXYNOS_SROM_BCX__TACP__SHIFT) |
- (timing[1] << EXYNOS_SROM_BCX__TCAH__SHIFT) |
- (timing[2] << EXYNOS_SROM_BCX__TCOH__SHIFT) |
- (timing[3] << EXYNOS_SROM_BCX__TACC__SHIFT) |
- (timing[4] << EXYNOS_SROM_BCX__TCOS__SHIFT) |
- (timing[5] << EXYNOS_SROM_BCX__TACS__SHIFT),
- srom->reg_base + EXYNOS_SROM_BC0 + bank);
+ writel_relaxed(pmc | (timing[0] << EXYNOS_SROM_BCX__TACP__SHIFT) |
+ (timing[1] << EXYNOS_SROM_BCX__TCAH__SHIFT) |
+ (timing[2] << EXYNOS_SROM_BCX__TCOH__SHIFT) |
+ (timing[3] << EXYNOS_SROM_BCX__TACC__SHIFT) |
+ (timing[4] << EXYNOS_SROM_BCX__TCOS__SHIFT) |
+ (timing[5] << EXYNOS_SROM_BCX__TACS__SHIFT),
+ srom->reg_base + EXYNOS_SROM_BC0 + bank);
return 0;
}
@@ -134,7 +134,7 @@ static int exynos_srom_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, srom);
srom->reg_offset = exynos_srom_alloc_reg_dump(exynos_srom_offsets,
- sizeof(exynos_srom_offsets));
+ ARRAY_SIZE(exynos_srom_offsets));
if (!srom->reg_offset) {
iounmap(srom->reg_base);
return -ENOMEM;
@@ -159,16 +159,6 @@ static int exynos_srom_probe(struct platform_device *pdev)
return of_platform_populate(np, NULL, NULL, dev);
}
-static int exynos_srom_remove(struct platform_device *pdev)
-{
- struct exynos_srom *srom = platform_get_drvdata(pdev);
-
- kfree(srom->reg_offset);
- iounmap(srom->reg_base);
-
- return 0;
-}
-
#ifdef CONFIG_PM_SLEEP
static void exynos_srom_save(void __iomem *base,
struct exynos_srom_reg_dump *rd,
@@ -211,21 +201,16 @@ static const struct of_device_id of_exynos_srom_ids[] = {
},
{},
};
-MODULE_DEVICE_TABLE(of, of_exynos_srom_ids);
static SIMPLE_DEV_PM_OPS(exynos_srom_pm_ops, exynos_srom_suspend, exynos_srom_resume);
static struct platform_driver exynos_srom_driver = {
.probe = exynos_srom_probe,
- .remove = exynos_srom_remove,
.driver = {
.name = "exynos-srom",
.of_match_table = of_exynos_srom_ids,
.pm = &exynos_srom_pm_ops,
+ .suppress_bind_attrs = true,
},
};
-module_platform_driver(exynos_srom_driver);
-
-MODULE_AUTHOR("Pankaj Dubey <pankaj.dubey@samsung.com>");
-MODULE_DESCRIPTION("Exynos SROM Controller Driver");
-MODULE_LICENSE("GPL");
+builtin_platform_driver(exynos_srom_driver);
diff --git a/drivers/memory/tegra/mc.c b/drivers/memory/tegra/mc.c
index a1ae0cc2b86d..a4803ac192bb 100644
--- a/drivers/memory/tegra/mc.c
+++ b/drivers/memory/tegra/mc.c
@@ -186,8 +186,10 @@ static int load_timings(struct tegra_mc *mc, struct device_node *node)
timing = &mc->timings[i++];
err = load_one_timing(mc, timing, child);
- if (err)
+ if (err) {
+ of_node_put(child);
return err;
+ }
}
return 0;
@@ -206,15 +208,13 @@ static int tegra_mc_setup_timings(struct tegra_mc *mc)
for_each_child_of_node(mc->dev->of_node, node) {
err = of_property_read_u32(node, "nvidia,ram-code",
&node_ram_code);
- if (err || (node_ram_code != ram_code)) {
- of_node_put(node);
+ if (err || (node_ram_code != ram_code))
continue;
- }
err = load_timings(mc, node);
+ of_node_put(node);
if (err)
return err;
- of_node_put(node);
break;
}
diff --git a/drivers/memory/tegra/tegra124-emc.c b/drivers/memory/tegra/tegra124-emc.c
index 3dac7be39654..06cc781ebac1 100644
--- a/drivers/memory/tegra/tegra124-emc.c
+++ b/drivers/memory/tegra/tegra124-emc.c
@@ -970,8 +970,10 @@ static int tegra_emc_load_timings_from_dt(struct tegra_emc *emc,
timing = &emc->timings[i++];
err = load_one_timing_from_dt(emc, timing, child);
- if (err)
+ if (err) {
+ of_node_put(child);
return err;
+ }
}
sort(emc->timings, emc->num_timings, sizeof(*timing), cmp_timings,
@@ -995,10 +997,8 @@ tegra_emc_find_node_by_ram_code(struct device_node *node, u32 ram_code)
u32 value;
err = of_property_read_u32(np, "nvidia,ram-code", &value);
- if (err || (value != ram_code)) {
- of_node_put(np);
+ if (err || (value != ram_code))
continue;
- }
return np;
}
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index f3d689176fc2..589eebfc13df 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -1087,7 +1087,6 @@ static int ab8500_probe(struct platform_device *pdev)
"Vbus Detect (USB)",
"USB ID Detect",
"UART Factory Mode Detect"};
- struct ab8500_platform_data *plat = dev_get_platdata(&pdev->dev);
const struct platform_device_id *platid = platform_get_device_id(pdev);
enum ab8500_version version = AB8500_VERSION_UNDEFINED;
struct device_node *np = pdev->dev.of_node;
@@ -1219,9 +1218,6 @@ static int ab8500_probe(struct platform_device *pdev)
pr_cont("None\n");
}
- if (plat && plat->init)
- plat->init(ab8500);
-
if (is_ab9540(ab8500)) {
ret = get_register_interruptible(ab8500, AB8500_CHARGER,
AB8500_CH_USBCH_STAT1_REG, &value);
diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
index b9f0010309f9..207cc497958a 100644
--- a/drivers/mfd/ab8500-sysctrl.c
+++ b/drivers/mfd/ab8500-sysctrl.c
@@ -127,45 +127,11 @@ EXPORT_SYMBOL(ab8500_sysctrl_write);
static int ab8500_sysctrl_probe(struct platform_device *pdev)
{
- struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
- struct ab8500_platform_data *plat;
- struct ab8500_sysctrl_platform_data *pdata;
-
- plat = dev_get_platdata(pdev->dev.parent);
-
- if (!plat)
- return -EINVAL;
-
sysctrl_dev = &pdev->dev;
if (!pm_power_off)
pm_power_off = ab8500_power_off;
- pdata = plat->sysctrl;
- if (pdata) {
- int last, ret, i, j;
-
- if (is_ab8505(ab8500))
- last = AB8500_SYSCLKREQ4RFCLKBUF;
- else
- last = AB8500_SYSCLKREQ8RFCLKBUF;
-
- for (i = AB8500_SYSCLKREQ1RFCLKBUF; i <= last; i++) {
- j = i - AB8500_SYSCLKREQ1RFCLKBUF;
- ret = ab8500_sysctrl_write(i, 0xff,
- pdata->initial_req_buf_config[j]);
- dev_dbg(&pdev->dev,
- "Setting SysClkReq%dRfClkBuf 0x%X\n",
- j + 1,
- pdata->initial_req_buf_config[j]);
- if (ret < 0) {
- dev_err(&pdev->dev,
- "Can't set sysClkReq%dRfClkBuf: %d\n",
- j + 1, ret);
- }
- }
- }
-
return 0;
}
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index c0a86aeb1733..388e268b9bcf 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -3094,8 +3094,7 @@ static void db8500_prcmu_update_cpufreq(void)
}
}
-static int db8500_prcmu_register_ab8500(struct device *parent,
- struct ab8500_platform_data *pdata)
+static int db8500_prcmu_register_ab8500(struct device *parent)
{
struct device_node *np;
struct resource ab8500_resource;
@@ -3103,8 +3102,6 @@ static int db8500_prcmu_register_ab8500(struct device *parent,
.name = "ab8500-core",
.of_compatible = "stericsson,ab8500",
.id = AB8500_VERSION_AB8500,
- .platform_data = pdata,
- .pdata_size = sizeof(struct ab8500_platform_data),
.resources = &ab8500_resource,
.num_resources = 1,
};
@@ -3133,7 +3130,6 @@ static int db8500_prcmu_register_ab8500(struct device *parent,
static int db8500_prcmu_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
- struct prcmu_pdata *pdata = dev_get_platdata(&pdev->dev);
int irq = 0, err = 0;
struct resource *res;
@@ -3149,7 +3145,7 @@ static int db8500_prcmu_probe(struct platform_device *pdev)
return -ENOMEM;
}
init_prcm_registers();
- dbx500_fw_version_init(pdev, pdata->version_offset);
+ dbx500_fw_version_init(pdev, DB8500_PRCMU_FW_VERSION_OFFSET);
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu-tcdm");
if (!res) {
dev_err(&pdev->dev, "no prcmu tcdm region provided\n");
@@ -3204,7 +3200,7 @@ static int db8500_prcmu_probe(struct platform_device *pdev)
}
}
- err = db8500_prcmu_register_ab8500(&pdev->dev, pdata->ab_platdata);
+ err = db8500_prcmu_register_ab8500(&pdev->dev);
if (err) {
mfd_remove_devices(&pdev->dev);
pr_err("prcmu: Failed to add ab8500 subdevice\n");
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 7053abced0bc..3bfac539334b 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -46,6 +46,16 @@ config POWER_RESET_AXXIA
Say Y if you have an Axxia family SoC.
+config POWER_RESET_BRCMKONA
+ bool "Broadcom Kona reset driver"
+ depends on ARM || COMPILE_TEST
+ default ARCH_BCM_MOBILE
+ help
+ This driver provides restart support for Broadcom Kona chips.
+
+ Say Y here if you have a Broadcom Kona-based board and you wish
+ to have restart support.
+
config POWER_RESET_BRCMSTB
bool "Broadcom STB reset driver"
depends on ARM || MIPS || COMPILE_TEST
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index d6b2560d5c4a..1be307c7fc25 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_POWER_RESET_AT91_POWEROFF) += at91-poweroff.o
obj-$(CONFIG_POWER_RESET_AT91_RESET) += at91-reset.o
obj-$(CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC) += at91-sama5d2_shdwc.o
obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
+obj-$(CONFIG_POWER_RESET_BRCMKONA) += brcm-kona-reset.o
obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o
obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
diff --git a/drivers/power/reset/brcm-kona-reset.c b/drivers/power/reset/brcm-kona-reset.c
new file mode 100644
index 000000000000..8eaa959d8be6
--- /dev/null
+++ b/drivers/power/reset/brcm-kona-reset.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/reboot.h>
+
+#define RSTMGR_REG_WR_ACCESS_OFFSET 0
+#define RSTMGR_REG_CHIP_SOFT_RST_OFFSET 4
+
+#define RSTMGR_WR_PASSWORD 0xa5a5
+#define RSTMGR_WR_PASSWORD_SHIFT 8
+#define RSTMGR_WR_ACCESS_ENABLE 1
+
+static void __iomem *kona_reset_base;
+
+static int kona_reset_handler(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ /*
+ * A soft reset is triggered by writing a 0 to bit 0 of the soft reset
+ * register. To write to that register we must first write the password
+ * and the enable bit in the write access enable register.
+ */
+ writel((RSTMGR_WR_PASSWORD << RSTMGR_WR_PASSWORD_SHIFT) |
+ RSTMGR_WR_ACCESS_ENABLE,
+ kona_reset_base + RSTMGR_REG_WR_ACCESS_OFFSET);
+ writel(0, kona_reset_base + RSTMGR_REG_CHIP_SOFT_RST_OFFSET);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block kona_reset_nb = {
+ .notifier_call = kona_reset_handler,
+ .priority = 128,
+};
+
+static int kona_reset_probe(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ kona_reset_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(kona_reset_base))
+ return PTR_ERR(kona_reset_base);
+
+ return register_restart_handler(&kona_reset_nb);
+}
+
+static const struct of_device_id of_match[] = {
+ { .compatible = "brcm,bcm21664-resetmgr" },
+ {},
+};
+
+static struct platform_driver bcm_kona_reset_driver = {
+ .probe = kona_reset_probe,
+ .driver = {
+ .name = "brcm-kona-reset",
+ .of_match_table = of_match,
+ },
+};
+
+builtin_platform_driver(bcm_kona_reset_driver);
diff --git a/drivers/pwm/pwm-clps711x.c b/drivers/pwm/pwm-clps711x.c
index 7d335422cfda..26ec24e457b1 100644
--- a/drivers/pwm/pwm-clps711x.c
+++ b/drivers/pwm/pwm-clps711x.c
@@ -155,7 +155,7 @@ static int clps711x_pwm_remove(struct platform_device *pdev)
}
static const struct of_device_id __maybe_unused clps711x_pwm_dt_ids[] = {
- { .compatible = "cirrus,clps711x-pwm", },
+ { .compatible = "cirrus,ep7209-pwm", },
{ }
};
MODULE_DEVICE_TABLE(of, clps711x_pwm_dt_ids);
diff --git a/drivers/pwm/pwm-omap-dmtimer.c b/drivers/pwm/pwm-omap-dmtimer.c
index 3e95090cd7cf..5ad42f33e70c 100644
--- a/drivers/pwm/pwm-omap-dmtimer.c
+++ b/drivers/pwm/pwm-omap-dmtimer.c
@@ -245,7 +245,7 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
struct pwm_omap_dmtimer_chip *omap;
struct pwm_omap_dmtimer_pdata *pdata;
pwm_omap_dmtimer *dm_timer;
- u32 prescaler;
+ u32 v;
int status;
pdata = dev_get_platdata(&pdev->dev);
@@ -306,10 +306,12 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
if (pm_runtime_active(&omap->dm_timer_pdev->dev))
omap->pdata->stop(omap->dm_timer);
- /* setup dmtimer prescaler */
- if (!of_property_read_u32(pdev->dev.of_node, "ti,prescaler",
- &prescaler))
- omap->pdata->set_prescaler(omap->dm_timer, prescaler);
+ if (!of_property_read_u32(pdev->dev.of_node, "ti,prescaler", &v))
+ omap->pdata->set_prescaler(omap->dm_timer, v);
+
+ /* setup dmtimer clock source */
+ if (!of_property_read_u32(pdev->dev.of_node, "ti,clock-source", &v))
+ omap->pdata->set_source(omap->dm_timer, v);
omap->chip.dev = &pdev->dev;
omap->chip.ops = &pwm_omap_dmtimer_ops;
diff --git a/drivers/regulator/ab8500-ext.c b/drivers/regulator/ab8500-ext.c
index 84c1ee39ddae..2ca00045eb99 100644
--- a/drivers/regulator/ab8500-ext.c
+++ b/drivers/regulator/ab8500-ext.c
@@ -25,6 +25,456 @@
#include <linux/mfd/abx500/ab8500.h>
#include <linux/regulator/ab8500.h>
+static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
+ /* Main display, u8500 R3 uib */
+ REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"),
+ /* Main display, u8500 uib and ST uib */
+ REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.0"),
+ /* Secondary display, ST uib */
+ REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.1"),
+ /* SFH7741 proximity sensor */
+ REGULATOR_SUPPLY("vcc", "gpio-keys.0"),
+ /* BH1780GLS ambient light sensor */
+ REGULATOR_SUPPLY("vcc", "2-0029"),
+ /* lsm303dlh accelerometer */
+ REGULATOR_SUPPLY("vdd", "2-0018"),
+ /* lsm303dlhc accelerometer */
+ REGULATOR_SUPPLY("vdd", "2-0019"),
+ /* lsm303dlh magnetometer */
+ REGULATOR_SUPPLY("vdd", "2-001e"),
+ /* Rohm BU21013 Touchscreen devices */
+ REGULATOR_SUPPLY("avdd", "3-005c"),
+ REGULATOR_SUPPLY("avdd", "3-005d"),
+ /* Synaptics RMI4 Touchscreen device */
+ REGULATOR_SUPPLY("vdd", "3-004b"),
+ /* L3G4200D Gyroscope device */
+ REGULATOR_SUPPLY("vdd", "2-0068"),
+ /* Ambient light sensor device */
+ REGULATOR_SUPPLY("vdd", "3-0029"),
+ /* Pressure sensor device */
+ REGULATOR_SUPPLY("vdd", "2-005c"),
+ /* Cypress TrueTouch Touchscreen device */
+ REGULATOR_SUPPLY("vcpin", "spi8.0"),
+ /* Camera device */
+ REGULATOR_SUPPLY("vaux12v5", "mmio_camera"),
+};
+
+static struct regulator_consumer_supply ab8500_vaux2_consumers[] = {
+ /* On-board eMMC power */
+ REGULATOR_SUPPLY("vmmc", "sdi4"),
+ /* AB8500 audio codec */
+ REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"),
+ /* AB8500 accessory detect 1 */
+ REGULATOR_SUPPLY("vcc-N2158", "ab8500-acc-det.0"),
+ /* AB8500 Tv-out device */
+ REGULATOR_SUPPLY("vcc-N2158", "mcde_tv_ab8500.4"),
+ /* AV8100 HDMI device */
+ REGULATOR_SUPPLY("vcc-N2158", "av8100_hdmi.3"),
+};
+
+static struct regulator_consumer_supply ab8500_vaux3_consumers[] = {
+ REGULATOR_SUPPLY("v-SD-STM", "stm"),
+ /* External MMC slot power */
+ REGULATOR_SUPPLY("vmmc", "sdi0"),
+};
+
+static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
+ /* TV-out DENC supply */
+ REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"),
+ /* Internal general-purpose ADC */
+ REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
+ /* ADC for charger */
+ REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"),
+ /* AB8500 Tv-out device */
+ REGULATOR_SUPPLY("vtvout", "mcde_tv_ab8500.4"),
+};
+
+static struct regulator_consumer_supply ab8500_vaud_consumers[] = {
+ /* AB8500 audio-codec main supply */
+ REGULATOR_SUPPLY("vaud", "ab8500-codec.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vamic1_consumers[] = {
+ /* AB8500 audio-codec Mic1 supply */
+ REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vamic2_consumers[] = {
+ /* AB8500 audio-codec Mic2 supply */
+ REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vdmic_consumers[] = {
+ /* AB8500 audio-codec DMic supply */
+ REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
+ /* SoC core supply, no device */
+ REGULATOR_SUPPLY("v-intcore", NULL),
+ /* USB Transceiver */
+ REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
+ /* Handled by abx500 clk driver */
+ REGULATOR_SUPPLY("v-intcore", "abx500-clk.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vana_consumers[] = {
+ /* DB8500 DSI */
+ REGULATOR_SUPPLY("vdddsi1v2", "mcde"),
+ REGULATOR_SUPPLY("vdddsi1v2", "b2r2_core"),
+ REGULATOR_SUPPLY("vdddsi1v2", "b2r2_1_core"),
+ REGULATOR_SUPPLY("vdddsi1v2", "dsilink.0"),
+ REGULATOR_SUPPLY("vdddsi1v2", "dsilink.1"),
+ REGULATOR_SUPPLY("vdddsi1v2", "dsilink.2"),
+ /* DB8500 CSI */
+ REGULATOR_SUPPLY("vddcsi1v2", "mmio_camera"),
+};
+
+/* ab8500 regulator register initialization */
+static struct ab8500_regulator_reg_init ab8500_reg_init[] = {
+ /*
+ * VanaRequestCtrl = HP/LP depending on VxRequest
+ * VextSupply1RequestCtrl = HP/LP depending on VxRequest
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0xf0, 0x00),
+ /*
+ * VextSupply2RequestCtrl = HP/LP depending on VxRequest
+ * VextSupply3RequestCtrl = HP/LP depending on VxRequest
+ * Vaux1RequestCtrl = HP/LP depending on VxRequest
+ * Vaux2RequestCtrl = HP/LP depending on VxRequest
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0xff, 0x00),
+ /*
+ * Vaux3RequestCtrl = HP/LP depending on VxRequest
+ * SwHPReq = Control through SWValid disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x07, 0x00),
+ /*
+ * VanaSysClkReq1HPValid = disabled
+ * Vaux1SysClkReq1HPValid = disabled
+ * Vaux2SysClkReq1HPValid = disabled
+ * Vaux3SysClkReq1HPValid = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00),
+ /*
+ * VextSupply1SysClkReq1HPValid = disabled
+ * VextSupply2SysClkReq1HPValid = disabled
+ * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40),
+ /*
+ * VanaHwHPReq1Valid = disabled
+ * Vaux1HwHPreq1Valid = disabled
+ * Vaux2HwHPReq1Valid = disabled
+ * Vaux3HwHPReqValid = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0xe8, 0x00),
+ /*
+ * VextSupply1HwHPReq1Valid = disabled
+ * VextSupply2HwHPReq1Valid = disabled
+ * VextSupply3HwHPReq1Valid = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x07, 0x00),
+ /*
+ * VanaHwHPReq2Valid = disabled
+ * Vaux1HwHPReq2Valid = disabled
+ * Vaux2HwHPReq2Valid = disabled
+ * Vaux3HwHPReq2Valid = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0xe8, 0x00),
+ /*
+ * VextSupply1HwHPReq2Valid = disabled
+ * VextSupply2HwHPReq2Valid = disabled
+ * VextSupply3HwHPReq2Valid = HWReq2 controlled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x07, 0x04),
+ /*
+ * VanaSwHPReqValid = disabled
+ * Vaux1SwHPReqValid = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0xa0, 0x00),
+ /*
+ * Vaux2SwHPReqValid = disabled
+ * Vaux3SwHPReqValid = disabled
+ * VextSupply1SwHPReqValid = disabled
+ * VextSupply2SwHPReqValid = disabled
+ * VextSupply3SwHPReqValid = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x1f, 0x00),
+ /*
+ * SysClkReq2Valid1 = SysClkReq2 controlled
+ * SysClkReq3Valid1 = disabled
+ * SysClkReq4Valid1 = SysClkReq4 controlled
+ * SysClkReq5Valid1 = disabled
+ * SysClkReq6Valid1 = SysClkReq6 controlled
+ * SysClkReq7Valid1 = disabled
+ * SysClkReq8Valid1 = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0xfe, 0x2a),
+ /*
+ * SysClkReq2Valid2 = disabled
+ * SysClkReq3Valid2 = disabled
+ * SysClkReq4Valid2 = disabled
+ * SysClkReq5Valid2 = disabled
+ * SysClkReq6Valid2 = SysClkReq6 controlled
+ * SysClkReq7Valid2 = disabled
+ * SysClkReq8Valid2 = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0xfe, 0x20),
+ /*
+ * VTVoutEna = disabled
+ * Vintcore12Ena = disabled
+ * Vintcore12Sel = 1.25 V
+ * Vintcore12LP = inactive (HP)
+ * VTVoutLP = inactive (HP)
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0xfe, 0x10),
+ /*
+ * VaudioEna = disabled
+ * VdmicEna = disabled
+ * Vamic1Ena = disabled
+ * Vamic2Ena = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x1e, 0x00),
+ /*
+ * Vamic1_dzout = high-Z when Vamic1 is disabled
+ * Vamic2_dzout = high-Z when Vamic2 is disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x03, 0x00),
+ /*
+ * VPll = Hw controlled (NOTE! PRCMU bits)
+ * VanaRegu = force off
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x0f, 0x02),
+ /*
+ * VrefDDREna = disabled
+ * VrefDDRSleepMode = inactive (no pulldown)
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x03, 0x00),
+ /*
+ * VextSupply1Regu = force LP
+ * VextSupply2Regu = force OFF
+ * VextSupply3Regu = force HP (-> STBB2=LP and TPS=LP)
+ * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0
+ * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0
+ */
+ INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0xff, 0x13),
+ /*
+ * Vaux1Regu = force HP
+ * Vaux2Regu = force off
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x0f, 0x01),
+ /*
+ * Vaux3Regu = force off
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x03, 0x00),
+ /*
+ * Vaux1Sel = 2.8 V
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x0f, 0x0C),
+ /*
+ * Vaux2Sel = 2.9 V
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0f, 0x0d),
+ /*
+ * Vaux3Sel = 2.91 V
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07, 0x07),
+ /*
+ * VextSupply12LP = disabled (no LP)
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x01, 0x00),
+ /*
+ * Vaux1Disch = short discharge time
+ * Vaux2Disch = short discharge time
+ * Vaux3Disch = short discharge time
+ * Vintcore12Disch = short discharge time
+ * VTVoutDisch = short discharge time
+ * VaudioDisch = short discharge time
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0xfc, 0x00),
+ /*
+ * VanaDisch = short discharge time
+ * VdmicPullDownEna = pulldown disabled when Vdmic is disabled
+ * VdmicDisch = short discharge time
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x16, 0x00),
+};
+
+/* AB8500 regulators */
+static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
+ /* supplies to the display/camera */
+ [AB8500_LDO_AUX1] = {
+ .supply_regulator = "ab8500-ext-supply3",
+ .constraints = {
+ .name = "V-DISPLAY",
+ .min_uV = 2800000,
+ .max_uV = 3300000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .boot_on = 1, /* display is on at boot */
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
+ .consumer_supplies = ab8500_vaux1_consumers,
+ },
+ /* supplies to the on-board eMMC */
+ [AB8500_LDO_AUX2] = {
+ .supply_regulator = "ab8500-ext-supply3",
+ .constraints = {
+ .name = "V-eMMC1",
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS |
+ REGULATOR_CHANGE_MODE,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_IDLE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers),
+ .consumer_supplies = ab8500_vaux2_consumers,
+ },
+ /* supply for VAUX3, supplies to SDcard slots */
+ [AB8500_LDO_AUX3] = {
+ .supply_regulator = "ab8500-ext-supply3",
+ .constraints = {
+ .name = "V-MMC-SD",
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS |
+ REGULATOR_CHANGE_MODE,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_IDLE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers),
+ .consumer_supplies = ab8500_vaux3_consumers,
+ },
+ /* supply for tvout, gpadc, TVOUT LDO */
+ [AB8500_LDO_TVOUT] = {
+ .constraints = {
+ .name = "V-TVOUT",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers),
+ .consumer_supplies = ab8500_vtvout_consumers,
+ },
+ /* supply for ab8500-vaudio, VAUDIO LDO */
+ [AB8500_LDO_AUDIO] = {
+ .constraints = {
+ .name = "V-AUD",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers),
+ .consumer_supplies = ab8500_vaud_consumers,
+ },
+ /* supply for v-anamic1 VAMic1-LDO */
+ [AB8500_LDO_ANAMIC1] = {
+ .constraints = {
+ .name = "V-AMIC1",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers),
+ .consumer_supplies = ab8500_vamic1_consumers,
+ },
+ /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
+ [AB8500_LDO_ANAMIC2] = {
+ .constraints = {
+ .name = "V-AMIC2",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers),
+ .consumer_supplies = ab8500_vamic2_consumers,
+ },
+ /* supply for v-dmic, VDMIC LDO */
+ [AB8500_LDO_DMIC] = {
+ .constraints = {
+ .name = "V-DMIC",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers),
+ .consumer_supplies = ab8500_vdmic_consumers,
+ },
+ /* supply for v-intcore12, VINTCORE12 LDO */
+ [AB8500_LDO_INTCORE] = {
+ .constraints = {
+ .name = "V-INTCORE",
+ .min_uV = 1250000,
+ .max_uV = 1350000,
+ .input_uV = 1800000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS |
+ REGULATOR_CHANGE_MODE |
+ REGULATOR_CHANGE_DRMS,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_IDLE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
+ .consumer_supplies = ab8500_vintcore_consumers,
+ },
+ /* supply for U8500 CSI-DSI, VANA LDO */
+ [AB8500_LDO_ANA] = {
+ .constraints = {
+ .name = "V-CSI-DSI",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
+ .consumer_supplies = ab8500_vana_consumers,
+ },
+};
+
+/* supply for VextSupply3 */
+static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = {
+ /* SIM supply for 3 V SIM cards */
+ REGULATOR_SUPPLY("vinvsim", "sim-detect.0"),
+};
+
+/*
+ * AB8500 external regulators
+ */
+static struct regulator_init_data ab8500_ext_regulators[] = {
+ /* fixed Vbat supplies VSMPS1_EXT_1V8 */
+ [AB8500_EXT_SUPPLY1] = {
+ .constraints = {
+ .name = "ab8500-ext-supply1",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .initial_mode = REGULATOR_MODE_IDLE,
+ .boot_on = 1,
+ .always_on = 1,
+ },
+ },
+ /* fixed Vbat supplies VSMPS2_EXT_1V36 and VSMPS5_EXT_1V15 */
+ [AB8500_EXT_SUPPLY2] = {
+ .constraints = {
+ .name = "ab8500-ext-supply2",
+ .min_uV = 1360000,
+ .max_uV = 1360000,
+ },
+ },
+ /* fixed Vbat supplies VSMPS3_EXT_3V4 and VSMPS4_EXT_3V4 */
+ [AB8500_EXT_SUPPLY3] = {
+ .constraints = {
+ .name = "ab8500-ext-supply3",
+ .min_uV = 3400000,
+ .max_uV = 3400000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies =
+ ARRAY_SIZE(ab8500_ext_supply3_consumers),
+ .consumer_supplies = ab8500_ext_supply3_consumers,
+ },
+};
+
+static struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {
+ .reg_init = ab8500_reg_init,
+ .num_reg_init = ARRAY_SIZE(ab8500_reg_init),
+ .regulator = ab8500_regulators,
+ .num_regulator = ARRAY_SIZE(ab8500_regulators),
+ .ext_regulator = ab8500_ext_regulators,
+ .num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators),
+};
+
/**
* struct ab8500_ext_regulator_info - ab8500 regulator information
* @dev: device pointer
@@ -344,8 +794,7 @@ static struct of_regulator_match ab8500_ext_regulator_match[] = {
static int ab8500_ext_regulator_probe(struct platform_device *pdev)
{
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
- struct ab8500_platform_data *ppdata;
- struct ab8500_regulator_platform_data *pdata;
+ struct ab8500_regulator_platform_data *pdata = &ab8500_regulator_plat_data;
struct device_node *np = pdev->dev.of_node;
struct regulator_config config = { };
int i, err;
@@ -366,18 +815,6 @@ static int ab8500_ext_regulator_probe(struct platform_device *pdev)
return -EINVAL;
}
- ppdata = dev_get_platdata(ab8500->dev);
- if (!ppdata) {
- dev_err(&pdev->dev, "null parent pdata\n");
- return -EINVAL;
- }
-
- pdata = ppdata->regulator;
- if (!pdata) {
- dev_err(&pdev->dev, "null pdata\n");
- return -EINVAL;
- }
-
/* make sure the platform data has the correct size */
if (pdata->num_ext_regulator != ARRAY_SIZE(ab8500_ext_regulator_info)) {
dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 0b2733db0e9e..4be1b8c21f6f 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -12,8 +12,22 @@ menuconfig RESET_CONTROLLER
If unsure, say no.
+if RESET_CONTROLLER
+
config RESET_OXNAS
bool
+config TI_SYSCON_RESET
+ tristate "TI SYSCON Reset Driver"
+ depends on HAS_IOMEM
+ select MFD_SYSCON
+ help
+ This enables the reset driver support for TI devices with
+ memory-mapped reset registers as part of a syscon device node. If
+ you wish to use the reset framework for such memory-mapped devices,
+ say Y here. Otherwise, say N.
+
source "drivers/reset/sti/Kconfig"
source "drivers/reset/hisilicon/Kconfig"
+
+endif
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index f173fc3847b4..5d65a93d3c43 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -3,9 +3,11 @@ obj-$(CONFIG_ARCH_LPC18XX) += reset-lpc18xx.o
obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
obj-$(CONFIG_MACH_PISTACHIO) += reset-pistachio.o
+obj-$(CONFIG_ARCH_MESON) += reset-meson.o
obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
obj-$(CONFIG_ARCH_STI) += sti/
obj-$(CONFIG_ARCH_HISI) += hisilicon/
obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o
obj-$(CONFIG_ATH79) += reset-ath79.o
obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
+obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
diff --git a/drivers/reset/core.c b/drivers/reset/core.c
index 72b32bd15549..395dc9ce492e 100644
--- a/drivers/reset/core.c
+++ b/drivers/reset/core.c
@@ -93,6 +93,43 @@ void reset_controller_unregister(struct reset_controller_dev *rcdev)
}
EXPORT_SYMBOL_GPL(reset_controller_unregister);
+static void devm_reset_controller_release(struct device *dev, void *res)
+{
+ reset_controller_unregister(*(struct reset_controller_dev **)res);
+}
+
+/**
+ * devm_reset_controller_register - resource managed reset_controller_register()
+ * @dev: device that is registering this reset controller
+ * @rcdev: a pointer to the initialized reset controller device
+ *
+ * Managed reset_controller_register(). For reset controllers registered by
+ * this function, reset_controller_unregister() is automatically called on
+ * driver detach. See reset_controller_register() for more information.
+ */
+int devm_reset_controller_register(struct device *dev,
+ struct reset_controller_dev *rcdev)
+{
+ struct reset_controller_dev **rcdevp;
+ int ret;
+
+ rcdevp = devres_alloc(devm_reset_controller_release, sizeof(*rcdevp),
+ GFP_KERNEL);
+ if (!rcdevp)
+ return -ENOMEM;
+
+ ret = reset_controller_register(rcdev);
+ if (!ret) {
+ *rcdevp = rcdev;
+ devres_add(dev, rcdevp);
+ } else {
+ devres_free(rcdevp);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(devm_reset_controller_register);
+
/**
* reset_control_reset - reset the controlled device
* @rstc: reset controller
diff --git a/drivers/reset/hisilicon/hi6220_reset.c b/drivers/reset/hisilicon/hi6220_reset.c
index 8f55fd4a2630..35ce53edabf9 100644
--- a/drivers/reset/hisilicon/hi6220_reset.c
+++ b/drivers/reset/hisilicon/hi6220_reset.c
@@ -1,7 +1,8 @@
/*
* Hisilicon Hi6220 reset controller driver
*
- * Copyright (c) 2015 Hisilicon Limited.
+ * Copyright (c) 2016 Linaro Limited.
+ * Copyright (c) 2015-2016 Hisilicon Limited.
*
* Author: Feng Chen <puck.chen@hisilicon.com>
*
@@ -15,81 +16,130 @@
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
#include <linux/reset-controller.h>
#include <linux/reset.h>
#include <linux/platform_device.h>
-#define ASSERT_OFFSET 0x300
-#define DEASSERT_OFFSET 0x304
-#define MAX_INDEX 0x509
+#define PERIPH_ASSERT_OFFSET 0x300
+#define PERIPH_DEASSERT_OFFSET 0x304
+#define PERIPH_MAX_INDEX 0x509
+
+#define SC_MEDIA_RSTEN 0x052C
+#define SC_MEDIA_RSTDIS 0x0530
+#define MEDIA_MAX_INDEX 8
#define to_reset_data(x) container_of(x, struct hi6220_reset_data, rc_dev)
+enum hi6220_reset_ctrl_type {
+ PERIPHERAL,
+ MEDIA,
+};
+
struct hi6220_reset_data {
- void __iomem *assert_base;
- void __iomem *deassert_base;
- struct reset_controller_dev rc_dev;
+ struct reset_controller_dev rc_dev;
+ struct regmap *regmap;
};
-static int hi6220_reset_assert(struct reset_controller_dev *rc_dev,
- unsigned long idx)
+static int hi6220_peripheral_assert(struct reset_controller_dev *rc_dev,
+ unsigned long idx)
{
struct hi6220_reset_data *data = to_reset_data(rc_dev);
+ struct regmap *regmap = data->regmap;
+ u32 bank = idx >> 8;
+ u32 offset = idx & 0xff;
+ u32 reg = PERIPH_ASSERT_OFFSET + bank * 0x10;
- int bank = idx >> 8;
- int offset = idx & 0xff;
+ return regmap_write(regmap, reg, BIT(offset));
+}
- writel(BIT(offset), data->assert_base + (bank * 0x10));
+static int hi6220_peripheral_deassert(struct reset_controller_dev *rc_dev,
+ unsigned long idx)
+{
+ struct hi6220_reset_data *data = to_reset_data(rc_dev);
+ struct regmap *regmap = data->regmap;
+ u32 bank = idx >> 8;
+ u32 offset = idx & 0xff;
+ u32 reg = PERIPH_DEASSERT_OFFSET + bank * 0x10;
- return 0;
+ return regmap_write(regmap, reg, BIT(offset));
}
-static int hi6220_reset_deassert(struct reset_controller_dev *rc_dev,
- unsigned long idx)
+static const struct reset_control_ops hi6220_peripheral_reset_ops = {
+ .assert = hi6220_peripheral_assert,
+ .deassert = hi6220_peripheral_deassert,
+};
+
+static int hi6220_media_assert(struct reset_controller_dev *rc_dev,
+ unsigned long idx)
{
struct hi6220_reset_data *data = to_reset_data(rc_dev);
+ struct regmap *regmap = data->regmap;
- int bank = idx >> 8;
- int offset = idx & 0xff;
+ return regmap_write(regmap, SC_MEDIA_RSTEN, BIT(idx));
+}
- writel(BIT(offset), data->deassert_base + (bank * 0x10));
+static int hi6220_media_deassert(struct reset_controller_dev *rc_dev,
+ unsigned long idx)
+{
+ struct hi6220_reset_data *data = to_reset_data(rc_dev);
+ struct regmap *regmap = data->regmap;
- return 0;
+ return regmap_write(regmap, SC_MEDIA_RSTDIS, BIT(idx));
}
-static const struct reset_control_ops hi6220_reset_ops = {
- .assert = hi6220_reset_assert,
- .deassert = hi6220_reset_deassert,
+static const struct reset_control_ops hi6220_media_reset_ops = {
+ .assert = hi6220_media_assert,
+ .deassert = hi6220_media_deassert,
};
static int hi6220_reset_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ enum hi6220_reset_ctrl_type type;
struct hi6220_reset_data *data;
- struct resource *res;
- void __iomem *src_base;
+ struct regmap *regmap;
- data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- src_base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(src_base))
- return PTR_ERR(src_base);
+ type = (enum hi6220_reset_ctrl_type)of_device_get_match_data(dev);
+
+ regmap = syscon_node_to_regmap(np);
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "failed to get reset controller regmap\n");
+ return PTR_ERR(regmap);
+ }
- data->assert_base = src_base + ASSERT_OFFSET;
- data->deassert_base = src_base + DEASSERT_OFFSET;
- data->rc_dev.nr_resets = MAX_INDEX;
- data->rc_dev.ops = &hi6220_reset_ops;
- data->rc_dev.of_node = pdev->dev.of_node;
+ data->regmap = regmap;
+ data->rc_dev.of_node = np;
+ if (type == MEDIA) {
+ data->rc_dev.ops = &hi6220_media_reset_ops;
+ data->rc_dev.nr_resets = MEDIA_MAX_INDEX;
+ } else {
+ data->rc_dev.ops = &hi6220_peripheral_reset_ops;
+ data->rc_dev.nr_resets = PERIPH_MAX_INDEX;
+ }
return reset_controller_register(&data->rc_dev);
}
static const struct of_device_id hi6220_reset_match[] = {
- { .compatible = "hisilicon,hi6220-sysctrl" },
- { },
+ {
+ .compatible = "hisilicon,hi6220-sysctrl",
+ .data = (void *)PERIPHERAL,
+ },
+ {
+ .compatible = "hisilicon,hi6220-mediactrl",
+ .data = (void *)MEDIA,
+ },
+ { /* sentinel */ },
};
+MODULE_DEVICE_TABLE(of, hi6220_reset_match);
static struct platform_driver hi6220_reset_driver = {
.probe = hi6220_reset_probe,
diff --git a/drivers/reset/reset-ath79.c b/drivers/reset/reset-ath79.c
index ccb940a8d9fb..16d410cd6146 100644
--- a/drivers/reset/reset-ath79.c
+++ b/drivers/reset/reset-ath79.c
@@ -112,7 +112,7 @@ static int ath79_reset_probe(struct platform_device *pdev)
ath79_reset->rcdev.of_reset_n_cells = 1;
ath79_reset->rcdev.nr_resets = 32;
- err = reset_controller_register(&ath79_reset->rcdev);
+ err = devm_reset_controller_register(&pdev->dev, &ath79_reset->rcdev);
if (err)
return err;
@@ -131,7 +131,6 @@ static int ath79_reset_remove(struct platform_device *pdev)
struct ath79_reset *ath79_reset = platform_get_drvdata(pdev);
unregister_restart_handler(&ath79_reset->restart_nb);
- reset_controller_unregister(&ath79_reset->rcdev);
return 0;
}
diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c
new file mode 100644
index 000000000000..c32f11a30c5f
--- /dev/null
+++ b/drivers/reset/reset-meson.c
@@ -0,0 +1,136 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define REG_COUNT 8
+#define BITS_PER_REG 32
+
+struct meson_reset {
+ void __iomem *reg_base;
+ struct reset_controller_dev rcdev;
+};
+
+static int meson_reset_reset(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct meson_reset *data =
+ container_of(rcdev, struct meson_reset, rcdev);
+ unsigned int bank = id / BITS_PER_REG;
+ unsigned int offset = id % BITS_PER_REG;
+ void __iomem *reg_addr = data->reg_base + (bank << 2);
+
+ if (bank >= REG_COUNT)
+ return -EINVAL;
+
+ writel(BIT(offset), reg_addr);
+
+ return 0;
+}
+
+static const struct reset_control_ops meson_reset_ops = {
+ .reset = meson_reset_reset,
+};
+
+static const struct of_device_id meson_reset_dt_ids[] = {
+ { .compatible = "amlogic,meson8b-reset", },
+ { .compatible = "amlogic,meson-gxbb-reset", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, meson_reset_dt_ids);
+
+static int meson_reset_probe(struct platform_device *pdev)
+{
+ struct meson_reset *data;
+ struct resource *res;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data->reg_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(data->reg_base))
+ return PTR_ERR(data->reg_base);
+
+ platform_set_drvdata(pdev, data);
+
+ data->rcdev.owner = THIS_MODULE;
+ data->rcdev.nr_resets = REG_COUNT * BITS_PER_REG;
+ data->rcdev.ops = &meson_reset_ops;
+ data->rcdev.of_node = pdev->dev.of_node;
+
+ return devm_reset_controller_register(&pdev->dev, &data->rcdev);
+}
+
+static struct platform_driver meson_reset_driver = {
+ .probe = meson_reset_probe,
+ .driver = {
+ .name = "meson_reset",
+ .of_match_table = meson_reset_dt_ids,
+ },
+};
+
+module_platform_driver(meson_reset_driver);
+
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION("Amlogic Meson Reset Controller driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/reset/reset-oxnas.c b/drivers/reset/reset-oxnas.c
index c60fb2dace3e..944980572f79 100644
--- a/drivers/reset/reset-oxnas.c
+++ b/drivers/reset/reset-oxnas.c
@@ -112,21 +112,11 @@ static int oxnas_reset_probe(struct platform_device *pdev)
data->rcdev.ops = &oxnas_reset_ops;
data->rcdev.of_node = pdev->dev.of_node;
- return reset_controller_register(&data->rcdev);
-}
-
-static int oxnas_reset_remove(struct platform_device *pdev)
-{
- struct oxnas_reset *data = platform_get_drvdata(pdev);
-
- reset_controller_unregister(&data->rcdev);
-
- return 0;
+ return devm_reset_controller_register(&pdev->dev, &data->rcdev);
}
static struct platform_driver oxnas_reset_driver = {
.probe = oxnas_reset_probe,
- .remove = oxnas_reset_remove,
.driver = {
.name = "oxnas-reset",
.of_match_table = oxnas_reset_dt_ids,
diff --git a/drivers/reset/reset-pistachio.c b/drivers/reset/reset-pistachio.c
index 72a97a15a4c8..bbc4c06dd33b 100644
--- a/drivers/reset/reset-pistachio.c
+++ b/drivers/reset/reset-pistachio.c
@@ -121,16 +121,7 @@ static int pistachio_reset_probe(struct platform_device *pdev)
rd->rcdev.ops = &pistachio_reset_ops;
rd->rcdev.of_node = np;
- return reset_controller_register(&rd->rcdev);
-}
-
-static int pistachio_reset_remove(struct platform_device *pdev)
-{
- struct pistachio_reset_data *data = platform_get_drvdata(pdev);
-
- reset_controller_unregister(&data->rcdev);
-
- return 0;
+ return devm_reset_controller_register(dev, &rd->rcdev);
}
static const struct of_device_id pistachio_reset_dt_ids[] = {
@@ -141,7 +132,6 @@ MODULE_DEVICE_TABLE(of, pistachio_reset_dt_ids);
static struct platform_driver pistachio_reset_driver = {
.probe = pistachio_reset_probe,
- .remove = pistachio_reset_remove,
.driver = {
.name = "pistachio-reset",
.of_match_table = pistachio_reset_dt_ids,
diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c
index cd05a7032b17..12add9b0fa49 100644
--- a/drivers/reset/reset-socfpga.c
+++ b/drivers/reset/reset-socfpga.c
@@ -134,16 +134,7 @@ static int socfpga_reset_probe(struct platform_device *pdev)
data->rcdev.ops = &socfpga_reset_ops;
data->rcdev.of_node = pdev->dev.of_node;
- return reset_controller_register(&data->rcdev);
-}
-
-static int socfpga_reset_remove(struct platform_device *pdev)
-{
- struct socfpga_reset_data *data = platform_get_drvdata(pdev);
-
- reset_controller_unregister(&data->rcdev);
-
- return 0;
+ return devm_reset_controller_register(dev, &data->rcdev);
}
static const struct of_device_id socfpga_reset_dt_ids[] = {
@@ -153,7 +144,6 @@ static const struct of_device_id socfpga_reset_dt_ids[] = {
static struct platform_driver socfpga_reset_driver = {
.probe = socfpga_reset_probe,
- .remove = socfpga_reset_remove,
.driver = {
.name = "socfpga-reset",
.of_match_table = socfpga_reset_dt_ids,
diff --git a/drivers/reset/reset-sunxi.c b/drivers/reset/reset-sunxi.c
index 677f86555212..3080190b3f90 100644
--- a/drivers/reset/reset-sunxi.c
+++ b/drivers/reset/reset-sunxi.c
@@ -165,21 +165,11 @@ static int sunxi_reset_probe(struct platform_device *pdev)
data->rcdev.ops = &sunxi_reset_ops;
data->rcdev.of_node = pdev->dev.of_node;
- return reset_controller_register(&data->rcdev);
-}
-
-static int sunxi_reset_remove(struct platform_device *pdev)
-{
- struct sunxi_reset_data *data = platform_get_drvdata(pdev);
-
- reset_controller_unregister(&data->rcdev);
-
- return 0;
+ return devm_reset_controller_register(&pdev->dev, &data->rcdev);
}
static struct platform_driver sunxi_reset_driver = {
.probe = sunxi_reset_probe,
- .remove = sunxi_reset_remove,
.driver = {
.name = "sunxi-reset",
.of_match_table = sunxi_reset_dt_ids,
diff --git a/drivers/reset/reset-ti-syscon.c b/drivers/reset/reset-ti-syscon.c
new file mode 100644
index 000000000000..47f0ffd3b013
--- /dev/null
+++ b/drivers/reset/reset-ti-syscon.c
@@ -0,0 +1,237 @@
+/*
+ * TI SYSCON regmap reset driver
+ *
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Andrew F. Davis <afd@ti.com>
+ * Suman Anna <afd@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+#include <dt-bindings/reset/ti-syscon.h>
+
+/**
+ * struct ti_syscon_reset_control - reset control structure
+ * @assert_offset: reset assert control register offset from syscon base
+ * @assert_bit: reset assert bit in the reset assert control register
+ * @deassert_offset: reset deassert control register offset from syscon base
+ * @deassert_bit: reset deassert bit in the reset deassert control register
+ * @status_offset: reset status register offset from syscon base
+ * @status_bit: reset status bit in the reset status register
+ * @flags: reset flag indicating how the (de)assert and status are handled
+ */
+struct ti_syscon_reset_control {
+ unsigned int assert_offset;
+ unsigned int assert_bit;
+ unsigned int deassert_offset;
+ unsigned int deassert_bit;
+ unsigned int status_offset;
+ unsigned int status_bit;
+ u32 flags;
+};
+
+/**
+ * struct ti_syscon_reset_data - reset controller information structure
+ * @rcdev: reset controller entity
+ * @regmap: regmap handle containing the memory-mapped reset registers
+ * @controls: array of reset controls
+ * @nr_controls: number of controls in control array
+ */
+struct ti_syscon_reset_data {
+ struct reset_controller_dev rcdev;
+ struct regmap *regmap;
+ struct ti_syscon_reset_control *controls;
+ unsigned int nr_controls;
+};
+
+#define to_ti_syscon_reset_data(rcdev) \
+ container_of(rcdev, struct ti_syscon_reset_data, rcdev)
+
+/**
+ * ti_syscon_reset_assert() - assert device reset
+ * @rcdev: reset controller entity
+ * @id: ID of the reset to be asserted
+ *
+ * This function implements the reset driver op to assert a device's reset.
+ * This asserts the reset in a manner prescribed by the reset flags.
+ *
+ * Return: 0 for successful request, else a corresponding error value
+ */
+static int ti_syscon_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct ti_syscon_reset_data *data = to_ti_syscon_reset_data(rcdev);
+ struct ti_syscon_reset_control *control;
+ unsigned int mask, value;
+
+ if (id >= data->nr_controls)
+ return -EINVAL;
+
+ control = &data->controls[id];
+
+ if (control->flags & ASSERT_NONE)
+ return -ENOTSUPP; /* assert not supported for this reset */
+
+ mask = BIT(control->assert_bit);
+ value = (control->flags & ASSERT_SET) ? mask : 0x0;
+
+ return regmap_update_bits(data->regmap, control->assert_offset, mask, value);
+}
+
+/**
+ * ti_syscon_reset_deassert() - deassert device reset
+ * @rcdev: reset controller entity
+ * @id: ID of reset to be deasserted
+ *
+ * This function implements the reset driver op to deassert a device's reset.
+ * This deasserts the reset in a manner prescribed by the reset flags.
+ *
+ * Return: 0 for successful request, else a corresponding error value
+ */
+static int ti_syscon_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct ti_syscon_reset_data *data = to_ti_syscon_reset_data(rcdev);
+ struct ti_syscon_reset_control *control;
+ unsigned int mask, value;
+
+ if (id >= data->nr_controls)
+ return -EINVAL;
+
+ control = &data->controls[id];
+
+ if (control->flags & DEASSERT_NONE)
+ return -ENOTSUPP; /* deassert not supported for this reset */
+
+ mask = BIT(control->deassert_bit);
+ value = (control->flags & DEASSERT_SET) ? mask : 0x0;
+
+ return regmap_update_bits(data->regmap, control->deassert_offset, mask, value);
+}
+
+/**
+ * ti_syscon_reset_status() - check device reset status
+ * @rcdev: reset controller entity
+ * @id: ID of the reset for which the status is being requested
+ *
+ * This function implements the reset driver op to return the status of a
+ * device's reset.
+ *
+ * Return: 0 if reset is deasserted, true if reset is asserted, else a
+ * corresponding error value
+ */
+static int ti_syscon_reset_status(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct ti_syscon_reset_data *data = to_ti_syscon_reset_data(rcdev);
+ struct ti_syscon_reset_control *control;
+ unsigned int reset_state;
+ int ret;
+
+ if (id >= data->nr_controls)
+ return -EINVAL;
+
+ control = &data->controls[id];
+
+ if (control->flags & STATUS_NONE)
+ return -ENOTSUPP; /* status not supported for this reset */
+
+ ret = regmap_read(data->regmap, control->status_offset, &reset_state);
+ if (ret)
+ return ret;
+
+ return (reset_state & BIT(control->status_bit)) &&
+ (control->flags & STATUS_SET);
+}
+
+static struct reset_control_ops ti_syscon_reset_ops = {
+ .assert = ti_syscon_reset_assert,
+ .deassert = ti_syscon_reset_deassert,
+ .status = ti_syscon_reset_status,
+};
+
+static int ti_syscon_reset_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct ti_syscon_reset_data *data;
+ struct regmap *regmap;
+ const __be32 *list;
+ struct ti_syscon_reset_control *controls;
+ int size, nr_controls, i;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ regmap = syscon_node_to_regmap(np->parent);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ list = of_get_property(np, "ti,reset-bits", &size);
+ if (!list || (size / sizeof(*list)) % 7 != 0) {
+ dev_err(dev, "invalid DT reset description\n");
+ return -EINVAL;
+ }
+
+ nr_controls = (size / sizeof(*list)) / 7;
+ controls = devm_kzalloc(dev, nr_controls * sizeof(*controls), GFP_KERNEL);
+ if (!controls)
+ return -ENOMEM;
+
+ for (i = 0; i < nr_controls; i++) {
+ controls[i].assert_offset = be32_to_cpup(list++);
+ controls[i].assert_bit = be32_to_cpup(list++);
+ controls[i].deassert_offset = be32_to_cpup(list++);
+ controls[i].deassert_bit = be32_to_cpup(list++);
+ controls[i].status_offset = be32_to_cpup(list++);
+ controls[i].status_bit = be32_to_cpup(list++);
+ controls[i].flags = be32_to_cpup(list++);
+ }
+
+ data->rcdev.ops = &ti_syscon_reset_ops;
+ data->rcdev.owner = THIS_MODULE;
+ data->rcdev.of_node = np;
+ data->rcdev.nr_resets = nr_controls;
+ data->regmap = regmap;
+ data->controls = controls;
+ data->nr_controls = nr_controls;
+
+ platform_set_drvdata(pdev, data);
+
+ return devm_reset_controller_register(dev, &data->rcdev);
+}
+
+static const struct of_device_id ti_syscon_reset_of_match[] = {
+ { .compatible = "ti,syscon-reset", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ti_syscon_reset_of_match);
+
+static struct platform_driver ti_syscon_reset_driver = {
+ .probe = ti_syscon_reset_probe,
+ .driver = {
+ .name = "ti-syscon-reset",
+ .of_match_table = ti_syscon_reset_of_match,
+ },
+};
+module_platform_driver(ti_syscon_reset_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_AUTHOR("Suman Anna <s-anna@ti.com>");
+MODULE_DESCRIPTION("TI SYSCON Regmap Reset Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/reset/reset-zynq.c b/drivers/reset/reset-zynq.c
index a7e87bc45885..138f2f205662 100644
--- a/drivers/reset/reset-zynq.c
+++ b/drivers/reset/reset-zynq.c
@@ -122,16 +122,7 @@ static int zynq_reset_probe(struct platform_device *pdev)
priv->rcdev.ops = &zynq_reset_ops;
priv->rcdev.of_node = pdev->dev.of_node;
- return reset_controller_register(&priv->rcdev);
-}
-
-static int zynq_reset_remove(struct platform_device *pdev)
-{
- struct zynq_reset_data *priv = platform_get_drvdata(pdev);
-
- reset_controller_unregister(&priv->rcdev);
-
- return 0;
+ return devm_reset_controller_register(&pdev->dev, &priv->rcdev);
}
static const struct of_device_id zynq_reset_dt_ids[] = {
@@ -141,7 +132,6 @@ static const struct of_device_id zynq_reset_dt_ids[] = {
static struct platform_driver zynq_reset_driver = {
.probe = zynq_reset_probe,
- .remove = zynq_reset_remove,
.driver = {
.name = KBUILD_MODNAME,
.of_match_table = zynq_reset_dt_ids,
diff --git a/drivers/reset/sti/Kconfig b/drivers/reset/sti/Kconfig
index f8c15a37fb35..613178553612 100644
--- a/drivers/reset/sti/Kconfig
+++ b/drivers/reset/sti/Kconfig
@@ -2,7 +2,6 @@ if ARCH_STI
config STI_RESET_SYSCFG
bool
- select RESET_CONTROLLER
config STIH415_RESET
bool
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index cb58ef0d9b2c..fe42a2fdf351 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -1,7 +1,6 @@
menu "SOC (System On Chip) specific Drivers"
source "drivers/soc/bcm/Kconfig"
-source "drivers/soc/brcmstb/Kconfig"
source "drivers/soc/fsl/qe/Kconfig"
source "drivers/soc/mediatek/Kconfig"
source "drivers/soc/qcom/Kconfig"
@@ -10,6 +9,7 @@ source "drivers/soc/samsung/Kconfig"
source "drivers/soc/sunxi/Kconfig"
source "drivers/soc/tegra/Kconfig"
source "drivers/soc/ti/Kconfig"
+source "drivers/soc/ux500/Kconfig"
source "drivers/soc/versatile/Kconfig"
endmenu
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 380230f03874..50c23d0bd457 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -3,7 +3,6 @@
#
obj-y += bcm/
-obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/
obj-$(CONFIG_ARCH_DOVE) += dove/
obj-$(CONFIG_MACH_DOVE) += dove/
obj-y += fsl/
@@ -15,4 +14,5 @@ obj-$(CONFIG_SOC_SAMSUNG) += samsung/
obj-$(CONFIG_ARCH_SUNXI) += sunxi/
obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-$(CONFIG_SOC_TI) += ti/
+obj-$(CONFIG_ARCH_U8500) += ux500/
obj-$(CONFIG_PLAT_VERSATILE) += versatile/
diff --git a/drivers/soc/bcm/Kconfig b/drivers/soc/bcm/Kconfig
index 3066edea184d..a39b0d58ddd0 100644
--- a/drivers/soc/bcm/Kconfig
+++ b/drivers/soc/bcm/Kconfig
@@ -1,9 +1,23 @@
+menu "Broadcom SoC drivers"
+
config RASPBERRYPI_POWER
bool "Raspberry Pi power domain driver"
- depends on ARCH_BCM2835 || COMPILE_TEST
+ depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
depends on RASPBERRYPI_FIRMWARE=y
select PM_GENERIC_DOMAINS if PM
- select PM_GENERIC_DOMAINS_OF if PM
help
This enables support for the RPi power domains which can be enabled
or disabled via the RPi firmware.
+
+config SOC_BRCMSTB
+ bool "Broadcom STB SoC drivers"
+ depends on ARM
+ select SOC_BUS
+ help
+ Enables drivers for the Broadcom Set-Top Box (STB) series of chips.
+ This option alone enables only some support code, while the drivers
+ can be enabled individually within this menu.
+
+ If unsure, say N.
+
+endmenu
diff --git a/drivers/soc/bcm/Makefile b/drivers/soc/bcm/Makefile
index 63aa3eb23087..dc4fced72d21 100644
--- a/drivers/soc/bcm/Makefile
+++ b/drivers/soc/bcm/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_RASPBERRYPI_POWER) += raspberrypi-power.o
+obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/
diff --git a/drivers/soc/brcmstb/Makefile b/drivers/soc/bcm/brcmstb/Makefile
index 9120b2715d3e..9120b2715d3e 100644
--- a/drivers/soc/brcmstb/Makefile
+++ b/drivers/soc/bcm/brcmstb/Makefile
diff --git a/drivers/soc/brcmstb/biuctrl.c b/drivers/soc/bcm/brcmstb/biuctrl.c
index 9049c076f9a1..3c39415d484f 100644
--- a/drivers/soc/brcmstb/biuctrl.c
+++ b/drivers/soc/bcm/brcmstb/biuctrl.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <linux/of_address.h>
#include <linux/syscore_ops.h>
+#include <linux/soc/brcmstb/brcmstb.h>
#define CPU_CREDIT_REG_OFFSET 0x184
#define CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK 0x70000000
diff --git a/drivers/soc/brcmstb/common.c b/drivers/soc/bcm/brcmstb/common.c
index 94e7335553f4..94e7335553f4 100644
--- a/drivers/soc/brcmstb/common.c
+++ b/drivers/soc/bcm/brcmstb/common.c
diff --git a/drivers/soc/brcmstb/Kconfig b/drivers/soc/brcmstb/Kconfig
deleted file mode 100644
index 7fec3b4c80a1..000000000000
--- a/drivers/soc/brcmstb/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-menuconfig SOC_BRCMSTB
- bool "Broadcom STB SoC drivers"
- depends on ARM
- select SOC_BUS
- help
- Enables drivers for the Broadcom Set-Top Box (STB) series of chips.
- This option alone enables only some support code, while the drivers
- can be enabled individually within this menu.
-
- If unsure, say N.
diff --git a/drivers/soc/qcom/smem_state.c b/drivers/soc/qcom/smem_state.c
index 54261decb369..d5437ca76ed9 100644
--- a/drivers/soc/qcom/smem_state.c
+++ b/drivers/soc/qcom/smem_state.c
@@ -104,26 +104,26 @@ struct qcom_smem_state *qcom_smem_state_get(struct device *dev,
if (con_id) {
index = of_property_match_string(dev->of_node,
- "qcom,state-names",
+ "qcom,smem-state-names",
con_id);
if (index < 0) {
- dev_err(dev, "missing qcom,state-names\n");
+ dev_err(dev, "missing qcom,smem-state-names\n");
return ERR_PTR(index);
}
}
ret = of_parse_phandle_with_args(dev->of_node,
- "qcom,state",
- "#qcom,state-cells",
+ "qcom,smem-states",
+ "#qcom,smem-state-cells",
index,
&args);
if (ret) {
- dev_err(dev, "failed to parse qcom,state property\n");
+ dev_err(dev, "failed to parse qcom,smem-states property\n");
return ERR_PTR(ret);
}
if (args.args_count != 1) {
- dev_err(dev, "invalid #qcom,state-cells\n");
+ dev_err(dev, "invalid #qcom,smem-state-cells\n");
return ERR_PTR(-EINVAL);
}
diff --git a/drivers/soc/qcom/smp2p.c b/drivers/soc/qcom/smp2p.c
index f1eed7f9dd67..f51fb2ea7200 100644
--- a/drivers/soc/qcom/smp2p.c
+++ b/drivers/soc/qcom/smp2p.c
@@ -196,7 +196,7 @@ static irqreturn_t qcom_smp2p_intr(int irq, void *data)
/* Match newly created entries */
for (i = smp2p->valid_entries; i < in->valid_entries; i++) {
list_for_each_entry(entry, &smp2p->inbound, node) {
- memcpy_fromio(buf, in->entries[i].name, sizeof(buf));
+ memcpy(buf, in->entries[i].name, sizeof(buf));
if (!strcmp(buf, entry->name)) {
entry->value = &in->entries[i].value;
break;
@@ -343,12 +343,13 @@ static int qcom_smp2p_outbound_entry(struct qcom_smp2p *smp2p,
/* Allocate an entry from the smem item */
strlcpy(buf, entry->name, SMP2P_MAX_ENTRY_NAME);
- memcpy_toio(out->entries[out->valid_entries].name, buf, SMP2P_MAX_ENTRY_NAME);
- out->valid_entries++;
+ memcpy(out->entries[out->valid_entries].name, buf, SMP2P_MAX_ENTRY_NAME);
/* Make the logical entry reference the physical value */
entry->value = &out->entries[out->valid_entries].value;
+ out->valid_entries++;
+
entry->state = qcom_smem_state_register(node, &smp2p_state_ops, entry);
if (IS_ERR(entry->state)) {
dev_err(smp2p->dev, "failed to register qcom_smem_state\n");
diff --git a/drivers/soc/qcom/smsm.c b/drivers/soc/qcom/smsm.c
index 6b777af1bc19..d0337b2a71c8 100644
--- a/drivers/soc/qcom/smsm.c
+++ b/drivers/soc/qcom/smsm.c
@@ -495,7 +495,7 @@ static int qcom_smsm_probe(struct platform_device *pdev)
if (!smsm->hosts)
return -ENOMEM;
- local_node = of_find_node_with_property(pdev->dev.of_node, "#qcom,state-cells");
+ local_node = of_find_node_with_property(pdev->dev.of_node, "#qcom,smem-state-cells");
if (!local_node) {
dev_err(&pdev->dev, "no state entry\n");
return -EINVAL;
diff --git a/drivers/soc/qcom/wcnss_ctrl.c b/drivers/soc/qcom/wcnss_ctrl.c
index c544f3d2c6ee..520aedd29965 100644
--- a/drivers/soc/qcom/wcnss_ctrl.c
+++ b/drivers/soc/qcom/wcnss_ctrl.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2016, Linaro Ltd.
* Copyright (c) 2015, Sony Mobile Communications Inc.
*
* This program is free software; you can redistribute it and/or modify
@@ -14,8 +15,16 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/soc/qcom/smd.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/soc/qcom/wcnss_ctrl.h>
#define WCNSS_REQUEST_TIMEOUT (5 * HZ)
+#define WCNSS_CBC_TIMEOUT (10 * HZ)
+
+#define WCNSS_ACK_DONE_BOOTING 1
+#define WCNSS_ACK_COLD_BOOTING 2
#define NV_FRAGMENT_SIZE 3072
#define NVBIN_FILE "wlan/prima/WCNSS_qcom_wlan_nv.bin"
@@ -25,17 +34,19 @@
* @dev: device handle
* @channel: SMD channel handle
* @ack: completion for outstanding requests
+ * @cbc: completion for cbc complete indication
* @ack_status: status of the outstanding request
- * @download_nv_work: worker for uploading nv binary
+ * @probe_work: worker for uploading nv binary
*/
struct wcnss_ctrl {
struct device *dev;
struct qcom_smd_channel *channel;
struct completion ack;
+ struct completion cbc;
int ack_status;
- struct work_struct download_nv_work;
+ struct work_struct probe_work;
};
/* message types */
@@ -48,6 +59,11 @@ enum {
WCNSS_UPLOAD_CAL_RESP,
WCNSS_DOWNLOAD_CAL_REQ,
WCNSS_DOWNLOAD_CAL_RESP,
+ WCNSS_VBAT_LEVEL_IND,
+ WCNSS_BUILD_VERSION_REQ,
+ WCNSS_BUILD_VERSION_RESP,
+ WCNSS_PM_CONFIG_REQ,
+ WCNSS_CBC_COMPLETE_IND,
};
/**
@@ -128,7 +144,7 @@ static int wcnss_ctrl_smd_callback(struct qcom_smd_channel *channel,
version->major, version->minor,
version->version, version->revision);
- schedule_work(&wcnss->download_nv_work);
+ complete(&wcnss->ack);
break;
case WCNSS_DOWNLOAD_NV_RESP:
if (count != sizeof(*nvresp)) {
@@ -141,6 +157,10 @@ static int wcnss_ctrl_smd_callback(struct qcom_smd_channel *channel,
wcnss->ack_status = nvresp->status;
complete(&wcnss->ack);
break;
+ case WCNSS_CBC_COMPLETE_IND:
+ dev_dbg(wcnss->dev, "cold boot complete\n");
+ complete(&wcnss->cbc);
+ break;
default:
dev_info(wcnss->dev, "unknown message type %d\n", hdr->type);
break;
@@ -156,20 +176,32 @@ static int wcnss_ctrl_smd_callback(struct qcom_smd_channel *channel,
static int wcnss_request_version(struct wcnss_ctrl *wcnss)
{
struct wcnss_msg_hdr msg;
+ int ret;
msg.type = WCNSS_VERSION_REQ;
msg.len = sizeof(msg);
+ ret = qcom_smd_send(wcnss->channel, &msg, sizeof(msg));
+ if (ret < 0)
+ return ret;
+
+ ret = wait_for_completion_timeout(&wcnss->ack, WCNSS_CBC_TIMEOUT);
+ if (!ret) {
+ dev_err(wcnss->dev, "timeout waiting for version response\n");
+ return -ETIMEDOUT;
+ }
- return qcom_smd_send(wcnss->channel, &msg, sizeof(msg));
+ return 0;
}
/**
* wcnss_download_nv() - send nv binary to WCNSS
- * @work: work struct to acquire wcnss context
+ * @wcnss: wcnss_ctrl state handle
+ * @expect_cbc: indicator to caller that an cbc event is expected
+ *
+ * Returns 0 on success. Negative errno on failure.
*/
-static void wcnss_download_nv(struct work_struct *work)
+static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc)
{
- struct wcnss_ctrl *wcnss = container_of(work, struct wcnss_ctrl, download_nv_work);
struct wcnss_download_nv_req *req;
const struct firmware *fw;
const void *data;
@@ -178,10 +210,10 @@ static void wcnss_download_nv(struct work_struct *work)
req = kzalloc(sizeof(*req) + NV_FRAGMENT_SIZE, GFP_KERNEL);
if (!req)
- return;
+ return -ENOMEM;
ret = request_firmware(&fw, NVBIN_FILE, wcnss->dev);
- if (ret) {
+ if (ret < 0) {
dev_err(wcnss->dev, "Failed to load nv file %s: %d\n",
NVBIN_FILE, ret);
goto free_req;
@@ -207,7 +239,7 @@ static void wcnss_download_nv(struct work_struct *work)
memcpy(req->fragment, data, req->frag_size);
ret = qcom_smd_send(wcnss->channel, req, req->hdr.len);
- if (ret) {
+ if (ret < 0) {
dev_err(wcnss->dev, "failed to send smd packet\n");
goto release_fw;
}
@@ -220,16 +252,58 @@ static void wcnss_download_nv(struct work_struct *work)
} while (left > 0);
ret = wait_for_completion_timeout(&wcnss->ack, WCNSS_REQUEST_TIMEOUT);
- if (!ret)
+ if (!ret) {
dev_err(wcnss->dev, "timeout waiting for nv upload ack\n");
- else if (wcnss->ack_status != 1)
- dev_err(wcnss->dev, "nv upload response failed err: %d\n",
- wcnss->ack_status);
+ ret = -ETIMEDOUT;
+ } else {
+ *expect_cbc = wcnss->ack_status == WCNSS_ACK_COLD_BOOTING;
+ ret = 0;
+ }
release_fw:
release_firmware(fw);
free_req:
kfree(req);
+
+ return ret;
+}
+
+/**
+ * qcom_wcnss_open_channel() - open additional SMD channel to WCNSS
+ * @wcnss: wcnss handle, retrieved from drvdata
+ * @name: SMD channel name
+ * @cb: callback to handle incoming data on the channel
+ */
+struct qcom_smd_channel *qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb)
+{
+ struct wcnss_ctrl *_wcnss = wcnss;
+
+ return qcom_smd_open_channel(_wcnss->channel, name, cb);
+}
+EXPORT_SYMBOL(qcom_wcnss_open_channel);
+
+static void wcnss_async_probe(struct work_struct *work)
+{
+ struct wcnss_ctrl *wcnss = container_of(work, struct wcnss_ctrl, probe_work);
+ bool expect_cbc;
+ int ret;
+
+ ret = wcnss_request_version(wcnss);
+ if (ret < 0)
+ return;
+
+ ret = wcnss_download_nv(wcnss, &expect_cbc);
+ if (ret < 0)
+ return;
+
+ /* Wait for pending cold boot completion if indicated by the nv downloader */
+ if (expect_cbc) {
+ ret = wait_for_completion_timeout(&wcnss->cbc, WCNSS_REQUEST_TIMEOUT);
+ if (!ret)
+ dev_err(wcnss->dev, "expected cold boot completion\n");
+ }
+
+ of_platform_populate(wcnss->dev->of_node, NULL, NULL, wcnss->dev);
}
static int wcnss_ctrl_probe(struct qcom_smd_device *sdev)
@@ -244,25 +318,38 @@ static int wcnss_ctrl_probe(struct qcom_smd_device *sdev)
wcnss->channel = sdev->channel;
init_completion(&wcnss->ack);
- INIT_WORK(&wcnss->download_nv_work, wcnss_download_nv);
+ init_completion(&wcnss->cbc);
+ INIT_WORK(&wcnss->probe_work, wcnss_async_probe);
qcom_smd_set_drvdata(sdev->channel, wcnss);
+ dev_set_drvdata(&sdev->dev, wcnss);
+
+ schedule_work(&wcnss->probe_work);
+
+ return 0;
+}
+
+static void wcnss_ctrl_remove(struct qcom_smd_device *sdev)
+{
+ struct wcnss_ctrl *wcnss = qcom_smd_get_drvdata(sdev->channel);
- return wcnss_request_version(wcnss);
+ cancel_work_sync(&wcnss->probe_work);
+ of_platform_depopulate(&sdev->dev);
}
-static const struct qcom_smd_id wcnss_ctrl_smd_match[] = {
- { .name = "WCNSS_CTRL" },
+static const struct of_device_id wcnss_ctrl_of_match[] = {
+ { .compatible = "qcom,wcnss", },
{}
};
static struct qcom_smd_driver wcnss_ctrl_driver = {
.probe = wcnss_ctrl_probe,
+ .remove = wcnss_ctrl_remove,
.callback = wcnss_ctrl_smd_callback,
- .smd_match_table = wcnss_ctrl_smd_match,
.driver = {
.name = "qcom_wcnss_ctrl",
.owner = THIS_MODULE,
+ .of_match_table = wcnss_ctrl_of_match,
},
};
diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
index d7fc123006a3..245533907d1b 100644
--- a/drivers/soc/samsung/Kconfig
+++ b/drivers/soc/samsung/Kconfig
@@ -10,4 +10,8 @@ config EXYNOS_PMU
bool "Exynos PMU controller driver" if COMPILE_TEST
depends on (ARM && ARCH_EXYNOS) || ((ARM || ARM64) && COMPILE_TEST)
+config EXYNOS_PM_DOMAINS
+ bool "Exynos PM domains" if COMPILE_TEST
+ depends on PM_GENERIC_DOMAINS || COMPILE_TEST
+
endif
diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile
index f64ac4d80564..3619f2ecddaa 100644
--- a/drivers/soc/samsung/Makefile
+++ b/drivers/soc/samsung/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o exynos3250-pmu.o exynos4-pmu.o \
exynos5250-pmu.o exynos5420-pmu.o
+obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o
diff --git a/drivers/soc/samsung/exynos3250-pmu.c b/drivers/soc/samsung/exynos3250-pmu.c
index 20b3ab8aa790..af2f54e14b83 100644
--- a/drivers/soc/samsung/exynos3250-pmu.c
+++ b/drivers/soc/samsung/exynos3250-pmu.c
@@ -14,7 +14,7 @@
#include "exynos-pmu.h"
-static struct exynos_pmu_conf exynos3250_pmu_config[] = {
+static const struct exynos_pmu_conf exynos3250_pmu_config[] = {
/* { .offset = offset, .val = { AFTR, W-AFTR, SLEEP } */
{ EXYNOS3_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
{ EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
diff --git a/drivers/soc/samsung/exynos5420-pmu.c b/drivers/soc/samsung/exynos5420-pmu.c
index b962fb6a5d22..3f2c64180ef8 100644
--- a/drivers/soc/samsung/exynos5420-pmu.c
+++ b/drivers/soc/samsung/exynos5420-pmu.c
@@ -17,7 +17,7 @@
#include "exynos-pmu.h"
-static struct exynos_pmu_conf exynos5420_pmu_config[] = {
+static const struct exynos_pmu_conf exynos5420_pmu_config[] = {
/* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
{ EXYNOS5_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
diff --git a/arch/arm/mach-exynos/pm_domains.c b/drivers/soc/samsung/pm_domains.c
index 0e075d96ccd4..4822346aadc6 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/drivers/soc/samsung/pm_domains.c
@@ -23,9 +23,13 @@
#include <linux/of_platform.h>
#include <linux/sched.h>
-#define INT_LOCAL_PWR_EN 0x7
#define MAX_CLK_PER_DOMAIN 4
+struct exynos_pm_domain_config {
+ /* Value for LOCAL_PWR_CFG and STATUS fields for each domain */
+ u32 local_pwr_cfg;
+};
+
/*
* Exynos specific wrapper around the generic power domain
*/
@@ -38,6 +42,7 @@ struct exynos_pm_domain {
struct clk *clk[MAX_CLK_PER_DOMAIN];
struct clk *pclk[MAX_CLK_PER_DOMAIN];
struct clk *asb_clk[MAX_CLK_PER_DOMAIN];
+ u32 local_pwr_cfg;
};
static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
@@ -69,13 +74,13 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
}
}
- pwr = power_on ? INT_LOCAL_PWR_EN : 0;
+ pwr = power_on ? pd->local_pwr_cfg : 0;
writel_relaxed(pwr, base);
/* Wait max 1ms */
timeout = 10;
- while ((readl_relaxed(base + 0x4) & INT_LOCAL_PWR_EN) != pwr) {
+ while ((readl_relaxed(base + 0x4) & pd->local_pwr_cfg) != pwr) {
if (!timeout) {
op = (power_on) ? "enable" : "disable";
pr_err("Power domain %s %s failed\n", domain->name, op);
@@ -119,14 +124,30 @@ static int exynos_pd_power_off(struct generic_pm_domain *domain)
return exynos_pd_power(domain, false);
}
+static const struct exynos_pm_domain_config exynos4210_cfg __initconst = {
+ .local_pwr_cfg = 0x7,
+};
+
+static const struct of_device_id exynos_pm_domain_of_match[] __initconst = {
+ {
+ .compatible = "samsung,exynos4210-pd",
+ .data = &exynos4210_cfg,
+ },
+ { },
+};
+
static __init int exynos4_pm_init_power_domain(void)
{
struct device_node *np;
+ const struct of_device_id *match;
- for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
+ for_each_matching_node_and_match(np, exynos_pm_domain_of_match, &match) {
+ const struct exynos_pm_domain_config *pm_domain_cfg;
struct exynos_pm_domain *pd;
int on, i;
+ pm_domain_cfg = match->data;
+
pd = kzalloc(sizeof(*pd), GFP_KERNEL);
if (!pd) {
pr_err("%s: failed to allocate memory for domain\n",
@@ -153,6 +174,7 @@ static __init int exynos4_pm_init_power_domain(void)
pd->pd.power_off = exynos_pd_power_off;
pd->pd.power_on = exynos_pd_power_on;
+ pd->local_pwr_cfg = pm_domain_cfg->local_pwr_cfg;
for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
char clk_name[8];
@@ -185,14 +207,14 @@ static __init int exynos4_pm_init_power_domain(void)
clk_put(pd->oscclk);
no_clk:
- on = readl_relaxed(pd->base + 0x4) & INT_LOCAL_PWR_EN;
+ on = readl_relaxed(pd->base + 0x4) & pd->local_pwr_cfg;
pm_genpd_init(&pd->pd, NULL, !on);
of_genpd_add_provider_simple(np, &pd->pd);
}
/* Assign the child power domains to their parents */
- for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
+ for_each_matching_node(np, exynos_pm_domain_of_match) {
struct generic_pm_domain *child_domain, *parent_domain;
struct of_phandle_args args;
diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index bb173456bbff..71c834f3847e 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -51,6 +51,7 @@
#define PMC_CNTRL_CPU_PWRREQ_POLARITY (1 << 15) /* CPU pwr req polarity */
#define PMC_CNTRL_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */
#define PMC_CNTRL_INTR_POLARITY (1 << 17) /* inverts INTR polarity */
+#define PMC_CNTRL_MAIN_RST (1 << 4)
#define DPD_SAMPLE 0x020
#define DPD_SAMPLE_ENABLE (1 << 0)
@@ -80,6 +81,14 @@
#define PMC_SENSOR_CTRL_SCRATCH_WRITE (1 << 2)
#define PMC_SENSOR_CTRL_ENABLE_RST (1 << 1)
+#define PMC_RST_STATUS 0x1b4
+#define PMC_RST_STATUS_POR 0
+#define PMC_RST_STATUS_WATCHDOG 1
+#define PMC_RST_STATUS_SENSOR 2
+#define PMC_RST_STATUS_SW_MAIN 3
+#define PMC_RST_STATUS_LP0 4
+#define PMC_RST_STATUS_AOTAG 5
+
#define IO_DPD_REQ 0x1b8
#define IO_DPD_REQ_CODE_IDLE (0 << 30)
#define IO_DPD_REQ_CODE_OFF (1 << 30)
@@ -399,6 +408,7 @@ static int tegra_powergate_power_up(struct tegra_powergate *pg,
disable_clks:
tegra_powergate_disable_clocks(pg);
usleep_range(10, 20);
+
powergate_off:
tegra_powergate_set(pg->id, false);
@@ -436,6 +446,7 @@ assert_resets:
usleep_range(10, 20);
tegra_powergate_reset_deassert(pg);
usleep_range(10, 20);
+
disable_clks:
tegra_powergate_disable_clocks(pg);
@@ -540,6 +551,9 @@ int tegra_powergate_sequence_power_up(unsigned int id, struct clk *clk,
struct tegra_powergate pg;
int err;
+ if (!tegra_powergate_is_available(id))
+ return -EINVAL;
+
pg.id = id;
pg.clks = &clk;
pg.num_clks = 1;
@@ -638,9 +652,10 @@ static int tegra_pmc_restart_notify(struct notifier_block *this,
tegra_pmc_writel(value, PMC_SCRATCH0);
- value = tegra_pmc_readl(0);
- value |= 0x10;
- tegra_pmc_writel(value, 0);
+ /* reset everything but PMC_SCRATCH0 and PMC_RST_STATUS */
+ value = tegra_pmc_readl(PMC_CNTRL);
+ value |= PMC_CNTRL_MAIN_RST;
+ tegra_pmc_writel(value, PMC_CNTRL);
return NOTIFY_DONE;
}
@@ -722,13 +737,14 @@ static int tegra_powergate_of_get_clks(struct tegra_powergate *pg,
err:
while (i--)
clk_put(pg->clks[i]);
+
kfree(pg->clks);
return err;
}
static int tegra_powergate_of_get_resets(struct tegra_powergate *pg,
- struct device_node *np)
+ struct device_node *np, bool off)
{
struct reset_control *rst;
unsigned int i, count;
@@ -748,6 +764,16 @@ static int tegra_powergate_of_get_resets(struct tegra_powergate *pg,
err = PTR_ERR(pg->resets[i]);
goto error;
}
+
+ if (off)
+ err = reset_control_assert(pg->resets[i]);
+ else
+ err = reset_control_deassert(pg->resets[i]);
+
+ if (err) {
+ reset_control_put(pg->resets[i]);
+ goto error;
+ }
}
pg->num_resets = count;
@@ -757,6 +783,7 @@ static int tegra_powergate_of_get_resets(struct tegra_powergate *pg,
error:
while (i--)
reset_control_put(pg->resets[i]);
+
kfree(pg->resets);
return err;
@@ -765,16 +792,19 @@ error:
static void tegra_powergate_add(struct tegra_pmc *pmc, struct device_node *np)
{
struct tegra_powergate *pg;
+ int id, err;
bool off;
- int id;
pg = kzalloc(sizeof(*pg), GFP_KERNEL);
if (!pg)
- goto error;
+ return;
id = tegra_powergate_lookup(pmc, np->name);
- if (id < 0)
+ if (id < 0) {
+ dev_err(pmc->dev, "powergate lookup failed for %s: %d\n",
+ np->name, id);
goto free_mem;
+ }
/*
* Clear the bit for this powergate so it cannot be managed
@@ -788,31 +818,64 @@ static void tegra_powergate_add(struct tegra_pmc *pmc, struct device_node *np)
pg->genpd.power_on = tegra_genpd_power_on;
pg->pmc = pmc;
- if (tegra_powergate_of_get_clks(pg, np))
+ off = !tegra_powergate_is_powered(pg->id);
+
+ err = tegra_powergate_of_get_clks(pg, np);
+ if (err < 0) {
+ dev_err(pmc->dev, "failed to get clocks for %s: %d\n",
+ np->name, err);
goto set_available;
+ }
- if (tegra_powergate_of_get_resets(pg, np))
+ err = tegra_powergate_of_get_resets(pg, np, off);
+ if (err < 0) {
+ dev_err(pmc->dev, "failed to get resets for %s: %d\n",
+ np->name, err);
goto remove_clks;
+ }
- off = !tegra_powergate_is_powered(pg->id);
+ if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS))
+ goto power_on_cleanup;
+
+ /*
+ * FIXME: If XHCI is enabled for Tegra, then power-up the XUSB
+ * host and super-speed partitions. Once the XHCI driver
+ * manages the partitions itself this code can be removed. Note
+ * that we don't register these partitions with the genpd core
+ * to avoid it from powering down the partitions as they appear
+ * to be unused.
+ */
+ if (IS_ENABLED(CONFIG_USB_XHCI_TEGRA) &&
+ (id == TEGRA_POWERGATE_XUSBA || id == TEGRA_POWERGATE_XUSBC))
+ goto power_on_cleanup;
pm_genpd_init(&pg->genpd, NULL, off);
- if (of_genpd_add_provider_simple(np, &pg->genpd))
+ err = of_genpd_add_provider_simple(np, &pg->genpd);
+ if (err < 0) {
+ dev_err(pmc->dev, "failed to add genpd provider for %s: %d\n",
+ np->name, err);
goto remove_resets;
+ }
dev_dbg(pmc->dev, "added power domain %s\n", pg->genpd.name);
return;
+power_on_cleanup:
+ if (off)
+ WARN_ON(tegra_powergate_power_up(pg, true));
+
remove_resets:
while (pg->num_resets--)
reset_control_put(pg->resets[pg->num_resets]);
+
kfree(pg->resets);
remove_clks:
while (pg->num_clks--)
clk_put(pg->clks[pg->num_clks]);
+
kfree(pg->clks);
set_available:
@@ -820,16 +883,20 @@ set_available:
free_mem:
kfree(pg);
-
-error:
- dev_err(pmc->dev, "failed to create power domain for %s\n", np->name);
}
-static void tegra_powergate_init(struct tegra_pmc *pmc)
+static void tegra_powergate_init(struct tegra_pmc *pmc,
+ struct device_node *parent)
{
struct device_node *np, *child;
+ unsigned int i;
+
+ /* Create a bitmap of the available and valid partitions */
+ for (i = 0; i < pmc->soc->num_powergates; i++)
+ if (pmc->soc->powergates[i])
+ set_bit(i, pmc->powergates_available);
- np = of_get_child_by_name(pmc->dev->of_node, "powergates");
+ np = of_get_child_by_name(parent, "powergates");
if (!np)
return;
@@ -1205,6 +1272,14 @@ static int tegra_pmc_probe(struct platform_device *pdev)
struct resource *res;
int err;
+ /*
+ * Early initialisation should have configured an initial
+ * register mapping and setup the soc data pointer. If these
+ * are not valid then something went badly wrong!
+ */
+ if (WARN_ON(!pmc->base || !pmc->soc))
+ return -ENODEV;
+
err = tegra_pmc_parse_dt(pmc, pdev->dev.of_node);
if (err < 0)
return err;
@@ -1242,8 +1317,6 @@ static int tegra_pmc_probe(struct platform_device *pdev)
return err;
}
- tegra_powergate_init(pmc);
-
mutex_lock(&pmc->powergates_lock);
iounmap(pmc->base);
pmc->base = base;
@@ -1477,10 +1550,11 @@ static int __init tegra_pmc_early_init(void)
const struct of_device_id *match;
struct device_node *np;
struct resource regs;
- unsigned int i;
bool invert;
u32 value;
+ mutex_init(&pmc->powergates_lock);
+
np = of_find_matching_node_and_match(NULL, tegra_pmc_match, &match);
if (!np) {
/*
@@ -1515,39 +1589,40 @@ static int __init tegra_pmc_early_init(void)
*/
if (of_address_to_resource(np, 0, &regs) < 0) {
pr_err("failed to get PMC registers\n");
+ of_node_put(np);
return -ENXIO;
}
-
- pmc->soc = match->data;
}
pmc->base = ioremap_nocache(regs.start, resource_size(&regs));
if (!pmc->base) {
pr_err("failed to map PMC registers\n");
+ of_node_put(np);
return -ENXIO;
}
- /* Create a bit-map of the available and valid partitions */
- for (i = 0; i < pmc->soc->num_powergates; i++)
- if (pmc->soc->powergates[i])
- set_bit(i, pmc->powergates_available);
+ if (np) {
+ pmc->soc = match->data;
- mutex_init(&pmc->powergates_lock);
+ tegra_powergate_init(pmc, np);
- /*
- * Invert the interrupt polarity if a PMC device tree node exists and
- * contains the nvidia,invert-interrupt property.
- */
- invert = of_property_read_bool(np, "nvidia,invert-interrupt");
+ /*
+ * Invert the interrupt polarity if a PMC device tree node
+ * exists and contains the nvidia,invert-interrupt property.
+ */
+ invert = of_property_read_bool(np, "nvidia,invert-interrupt");
- value = tegra_pmc_readl(PMC_CNTRL);
+ value = tegra_pmc_readl(PMC_CNTRL);
- if (invert)
- value |= PMC_CNTRL_INTR_POLARITY;
- else
- value &= ~PMC_CNTRL_INTR_POLARITY;
+ if (invert)
+ value |= PMC_CNTRL_INTR_POLARITY;
+ else
+ value &= ~PMC_CNTRL_INTR_POLARITY;
- tegra_pmc_writel(value, PMC_CNTRL);
+ tegra_pmc_writel(value, PMC_CNTRL);
+
+ of_node_put(np);
+ }
return 0;
}
diff --git a/drivers/soc/ux500/Kconfig b/drivers/soc/ux500/Kconfig
new file mode 100644
index 000000000000..025a44aef5db
--- /dev/null
+++ b/drivers/soc/ux500/Kconfig
@@ -0,0 +1,7 @@
+config UX500_SOC_ID
+ bool "SoC bus for ST-Ericsson ux500"
+ depends on ARCH_U8500 || COMPILE_TEST
+ default ARCH_U8500
+ help
+ Include support for the SoC bus on the ARM RealView platforms
+ providing some sysfs information about the ASIC variant.
diff --git a/drivers/soc/ux500/Makefile b/drivers/soc/ux500/Makefile
new file mode 100644
index 000000000000..0b87ad04b018
--- /dev/null
+++ b/drivers/soc/ux500/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_UX500_SOC_ID) += ux500-soc-id.o
diff --git a/drivers/soc/ux500/ux500-soc-id.c b/drivers/soc/ux500/ux500-soc-id.c
new file mode 100644
index 000000000000..6c1be74e5fcc
--- /dev/null
+++ b/drivers/soc/ux500/ux500-soc-id.c
@@ -0,0 +1,222 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/random.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/sys_soc.h>
+
+#include <asm/cputype.h>
+#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
+#include <asm/mach/map.h>
+
+/**
+ * struct dbx500_asic_id - fields of the ASIC ID
+ * @process: the manufacturing process, 0x40 is 40 nm 0x00 is "standard"
+ * @partnumber: hithereto 0x8500 for DB8500
+ * @revision: version code in the series
+ */
+struct dbx500_asic_id {
+ u16 partnumber;
+ u8 revision;
+ u8 process;
+};
+
+static struct dbx500_asic_id dbx500_id;
+
+static unsigned int __init ux500_read_asicid(phys_addr_t addr)
+{
+ void __iomem *virt = ioremap(addr, 4);
+ unsigned int asicid;
+
+ if (!virt)
+ return 0;
+
+ asicid = readl(virt);
+ iounmap(virt);
+
+ return asicid;
+}
+
+static void ux500_print_soc_info(unsigned int asicid)
+{
+ unsigned int rev = dbx500_id.revision;
+
+ pr_info("DB%4x ", dbx500_id.partnumber);
+
+ if (rev == 0x01)
+ pr_cont("Early Drop");
+ else if (rev >= 0xA0)
+ pr_cont("v%d.%d" , (rev >> 4) - 0xA + 1, rev & 0xf);
+ else
+ pr_cont("Unknown");
+
+ pr_cont(" [%#010x]\n", asicid);
+}
+
+static unsigned int partnumber(unsigned int asicid)
+{
+ return (asicid >> 8) & 0xffff;
+}
+
+/*
+ * SOC MIDR ASICID ADDRESS ASICID VALUE
+ * DB8500ed 0x410fc090 0x9001FFF4 0x00850001
+ * DB8500v1 0x411fc091 0x9001FFF4 0x008500A0
+ * DB8500v1.1 0x411fc091 0x9001FFF4 0x008500A1
+ * DB8500v2 0x412fc091 0x9001DBF4 0x008500B0
+ * DB8520v2.2 0x412fc091 0x9001DBF4 0x008500B2
+ * DB5500v1 0x412fc091 0x9001FFF4 0x005500A0
+ * DB9540 0x413fc090 0xFFFFDBF4 0x009540xx
+ */
+
+static void __init ux500_setup_id(void)
+{
+ unsigned int cpuid = read_cpuid_id();
+ unsigned int asicid = 0;
+ phys_addr_t addr = 0;
+
+ switch (cpuid) {
+ case 0x410fc090: /* DB8500ed */
+ case 0x411fc091: /* DB8500v1 */
+ addr = 0x9001FFF4;
+ break;
+
+ case 0x412fc091: /* DB8520 / DB8500v2 / DB5500v1 */
+ asicid = ux500_read_asicid(0x9001DBF4);
+ if (partnumber(asicid) == 0x8500 ||
+ partnumber(asicid) == 0x8520)
+ /* DB8500v2 */
+ break;
+
+ /* DB5500v1 */
+ addr = 0x9001FFF4;
+ break;
+
+ case 0x413fc090: /* DB9540 */
+ addr = 0xFFFFDBF4;
+ break;
+ }
+
+ if (addr)
+ asicid = ux500_read_asicid(addr);
+
+ if (!asicid) {
+ pr_err("Unable to identify SoC\n");
+ BUG();
+ }
+
+ dbx500_id.process = asicid >> 24;
+ dbx500_id.partnumber = partnumber(asicid);
+ dbx500_id.revision = asicid & 0xff;
+
+ ux500_print_soc_info(asicid);
+}
+
+static const char * __init ux500_get_machine(void)
+{
+ return kasprintf(GFP_KERNEL, "DB%4x", dbx500_id.partnumber);
+}
+
+static const char * __init ux500_get_family(void)
+{
+ return kasprintf(GFP_KERNEL, "ux500");
+}
+
+static const char * __init ux500_get_revision(void)
+{
+ unsigned int rev = dbx500_id.revision;
+
+ if (rev == 0x01)
+ return kasprintf(GFP_KERNEL, "%s", "ED");
+ else if (rev >= 0xA0)
+ return kasprintf(GFP_KERNEL, "%d.%d",
+ (rev >> 4) - 0xA + 1, rev & 0xf);
+
+ return kasprintf(GFP_KERNEL, "%s", "Unknown");
+}
+
+static ssize_t ux500_get_process(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ if (dbx500_id.process == 0x00)
+ return sprintf(buf, "Standard\n");
+
+ return sprintf(buf, "%02xnm\n", dbx500_id.process);
+}
+
+static const char *db8500_read_soc_id(struct device_node *backupram)
+{
+ void __iomem *base;
+ void __iomem *uid;
+ const char *retstr;
+
+ base = of_iomap(backupram, 0);
+ if (!base)
+ return NULL;
+ uid = base + 0x1fc0;
+
+ /* Throw these device-specific numbers into the entropy pool */
+ add_device_randomness(uid, 0x14);
+ retstr = kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
+ readl((u32 *)uid+0),
+ readl((u32 *)uid+1), readl((u32 *)uid+2),
+ readl((u32 *)uid+3), readl((u32 *)uid+4));
+ iounmap(base);
+ return retstr;
+}
+
+static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr,
+ struct device_node *backupram)
+{
+ soc_dev_attr->soc_id = db8500_read_soc_id(backupram);
+ soc_dev_attr->machine = ux500_get_machine();
+ soc_dev_attr->family = ux500_get_family();
+ soc_dev_attr->revision = ux500_get_revision();
+}
+
+static const struct device_attribute ux500_soc_attr =
+ __ATTR(process, S_IRUGO, ux500_get_process, NULL);
+
+static int __init ux500_soc_device_init(void)
+{
+ struct device *parent;
+ struct soc_device *soc_dev;
+ struct soc_device_attribute *soc_dev_attr;
+ struct device_node *backupram;
+
+ backupram = of_find_compatible_node(NULL, NULL, "ste,dbx500-backupram");
+ if (!backupram)
+ return 0;
+
+ ux500_setup_id();
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return -ENOMEM;
+
+ soc_info_populate(soc_dev_attr, backupram);
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr);
+ return PTR_ERR(soc_dev);
+ }
+
+ parent = soc_device_to_device(soc_dev);
+ device_create_file(parent, &ux500_soc_attr);
+
+ return 0;
+}
+subsys_initcall(ux500_soc_device_init);
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index 5beafd2d2218..ac1328629baa 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -539,7 +539,7 @@ static int uart_clps711x_remove(struct platform_device *pdev)
}
static const struct of_device_id __maybe_unused clps711x_uart_dt_ids[] = {
- { .compatible = "cirrus,clps711x-uart", },
+ { .compatible = "cirrus,ep7209-uart", },
{ }
};
MODULE_DEVICE_TABLE(of, clps711x_uart_dt_ids);
diff --git a/drivers/video/fbdev/clps711x-fb.c b/drivers/video/fbdev/clps711x-fb.c
index 649b32f78c08..ff561073ee4e 100644
--- a/drivers/video/fbdev/clps711x-fb.c
+++ b/drivers/video/fbdev/clps711x-fb.c
@@ -273,7 +273,7 @@ static int clps711x_fb_probe(struct platform_device *pdev)
}
cfb->syscon =
- syscon_regmap_lookup_by_compatible("cirrus,clps711x-syscon1");
+ syscon_regmap_lookup_by_compatible("cirrus,ep7209-syscon1");
if (IS_ERR(cfb->syscon)) {
ret = PTR_ERR(cfb->syscon);
goto out_fb_release;
@@ -376,7 +376,7 @@ static int clps711x_fb_remove(struct platform_device *pdev)
}
static const struct of_device_id clps711x_fb_dt_ids[] = {
- { .compatible = "cirrus,clps711x-fb", },
+ { .compatible = "cirrus,ep7209-fb", },
{ }
};
MODULE_DEVICE_TABLE(of, clps711x_fb_dt_ids);
diff --git a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h
new file mode 100644
index 000000000000..524d6077ac1b
--- /dev/null
+++ b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h
@@ -0,0 +1,210 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H
+#define _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H
+
+/* RESET0 */
+#define RESET_HIU 0
+/* 1 */
+#define RESET_DOS_RESET 2
+#define RESET_DDR_TOP 3
+#define RESET_DCU_RESET 4
+#define RESET_VIU 5
+#define RESET_AIU 6
+#define RESET_VID_PLL_DIV 7
+/* 8 */
+#define RESET_PMUX 9
+#define RESET_VENC 10
+#define RESET_ASSIST 11
+#define RESET_AFIFO2 12
+#define RESET_VCBUS 13
+/* 14 */
+/* 15 */
+#define RESET_GIC 16
+#define RESET_CAPB3_DECODE 17
+#define RESET_NAND_CAPB3 18
+#define RESET_HDMITX_CAPB3 19
+#define RESET_MALI_CAPB3 20
+#define RESET_DOS_CAPB3 21
+#define RESET_SYS_CPU_CAPB3 22
+#define RESET_CBUS_CAPB3 23
+#define RESET_AHB_CNTL 24
+#define RESET_AHB_DATA 25
+#define RESET_VCBUS_CLK81 26
+#define RESET_MMC 27
+#define RESET_MIPI_0 28
+#define RESET_MIPI_1 29
+#define RESET_MIPI_2 30
+#define RESET_MIPI_3 31
+/* RESET1 */
+#define RESET_CPPM 32
+#define RESET_DEMUX 33
+#define RESET_USB_OTG 34
+#define RESET_DDR 35
+#define RESET_AO_RESET 36
+#define RESET_BT656 37
+#define RESET_AHB_SRAM 38
+/* 39 */
+#define RESET_PARSER 40
+#define RESET_BLKMV 41
+#define RESET_ISA 42
+#define RESET_ETHERNET 43
+#define RESET_SD_EMMC_A 44
+#define RESET_SD_EMMC_B 45
+#define RESET_SD_EMMC_C 46
+#define RESET_ROM_BOOT 47
+#define RESET_SYS_CPU_0 48
+#define RESET_SYS_CPU_1 49
+#define RESET_SYS_CPU_2 50
+#define RESET_SYS_CPU_3 51
+#define RESET_SYS_CPU_CORE_0 52
+#define RESET_SYS_CPU_CORE_1 53
+#define RESET_SYS_CPU_CORE_2 54
+#define RESET_SYS_CPU_CORE_3 55
+#define RESET_SYS_PLL_DIV 56
+#define RESET_SYS_CPU_AXI 57
+#define RESET_SYS_CPU_L2 58
+#define RESET_SYS_CPU_P 59
+#define RESET_SYS_CPU_MBIST 60
+/* 61 */
+/* 62 */
+/* 63 */
+/* RESET2 */
+#define RESET_VD_RMEM 64
+#define RESET_AUDIN 65
+#define RESET_HDMI_TX 66
+/* 67 */
+/* 68 */
+/* 69 */
+#define RESET_GE2D 70
+#define RESET_PARSER_REG 71
+#define RESET_PARSER_FETCH 72
+#define RESET_PARSER_CTL 73
+#define RESET_PARSER_TOP 74
+/* 75 */
+/* 76 */
+#define RESET_AO_CPU_RESET 77
+#define RESET_MALI 78
+#define RESET_HDMI_SYSTEM_RESET 79
+/* 80-95 */
+/* RESET3 */
+#define RESET_RING_OSCILLATOR 96
+#define RESET_SYS_CPU 97
+#define RESET_EFUSE 98
+#define RESET_SYS_CPU_BVCI 99
+#define RESET_AIFIFO 100
+#define RESET_TVFE 101
+#define RESET_AHB_BRIDGE_CNTL 102
+/* 103 */
+#define RESET_AUDIO_DAC 104
+#define RESET_DEMUX_TOP 105
+#define RESET_DEMUX_DES 106
+#define RESET_DEMUX_S2P_0 107
+#define RESET_DEMUX_S2P_1 108
+#define RESET_DEMUX_RESET_0 109
+#define RESET_DEMUX_RESET_1 110
+#define RESET_DEMUX_RESET_2 111
+/* 112-127 */
+/* RESET4 */
+/* 128 */
+/* 129 */
+/* 130 */
+/* 131 */
+#define RESET_DVIN_RESET 132
+#define RESET_RDMA 133
+#define RESET_VENCI 134
+#define RESET_VENCP 135
+/* 136 */
+#define RESET_VDAC 137
+#define RESET_RTC 138
+/* 139 */
+#define RESET_VDI6 140
+#define RESET_VENCL 141
+#define RESET_I2C_MASTER_2 142
+#define RESET_I2C_MASTER_1 143
+/* 144-159 */
+/* RESET5 */
+/* 160-191 */
+/* RESET6 */
+#define RESET_PERIPHS_GENERAL 192
+#define RESET_PERIPHS_SPICC 193
+#define RESET_PERIPHS_SMART_CARD 194
+#define RESET_PERIPHS_SAR_ADC 195
+#define RESET_PERIPHS_I2C_MASTER_0 196
+#define RESET_SANA 197
+/* 198 */
+#define RESET_PERIPHS_STREAM_INTERFACE 199
+#define RESET_PERIPHS_SDIO 200
+#define RESET_PERIPHS_UART_0 201
+#define RESET_PERIPHS_UART_1_2 202
+#define RESET_PERIPHS_ASYNC_0 203
+#define RESET_PERIPHS_ASYNC_1 204
+#define RESET_PERIPHS_SPI_0 205
+#define RESET_PERIPHS_SDHC 206
+#define RESET_UART_SLIP 207
+/* 208-223 */
+/* RESET7 */
+#define RESET_USB_DDR_0 224
+#define RESET_USB_DDR_1 225
+#define RESET_USB_DDR_2 226
+#define RESET_USB_DDR_3 227
+/* 228 */
+#define RESET_DEVICE_MMC_ARB 229
+/* 230 */
+#define RESET_VID_LOCK 231
+#define RESET_A9_DMC_PIPEL 232
+/* 233-255 */
+
+#endif
diff --git a/include/dt-bindings/reset/amlogic,meson8b-reset.h b/include/dt-bindings/reset/amlogic,meson8b-reset.h
new file mode 100644
index 000000000000..614aff2c7aff
--- /dev/null
+++ b/include/dt-bindings/reset/amlogic,meson8b-reset.h
@@ -0,0 +1,175 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _DT_BINDINGS_AMLOGIC_MESON8B_RESET_H
+#define _DT_BINDINGS_AMLOGIC_MESON8B_RESET_H
+
+/* RESET0 */
+#define RESET_HIU 0
+#define RESET_VLD 1
+#define RESET_IQIDCT 2
+#define RESET_MC 3
+/* 8 */
+#define RESET_VIU 5
+#define RESET_AIU 6
+#define RESET_MCPU 7
+#define RESET_CCPU 8
+#define RESET_PMUX 9
+#define RESET_VENC 10
+#define RESET_ASSIST 11
+#define RESET_AFIFO2 12
+#define RESET_MDEC 13
+#define RESET_VLD_PART 14
+#define RESET_VIFIFO 15
+/* 16-31 */
+/* RESET1 */
+/* 32 */
+#define RESET_DEMUX 33
+#define RESET_USB_OTG 34
+#define RESET_DDR 35
+#define RESET_VDAC_1 36
+#define RESET_BT656 37
+#define RESET_AHB_SRAM 38
+#define RESET_AHB_BRIDGE 39
+#define RESET_PARSER 40
+#define RESET_BLKMV 41
+#define RESET_ISA 42
+#define RESET_ETHERNET 43
+#define RESET_ABUF 44
+#define RESET_AHB_DATA 45
+#define RESET_AHB_CNTL 46
+#define RESET_ROM_BOOT 47
+/* 48-63 */
+/* RESET2 */
+#define RESET_VD_RMEM 64
+#define RESET_AUDIN 65
+#define RESET_DBLK 66
+#define RESET_PIC_DC 66
+#define RESET_PSC 66
+#define RESET_NAND 66
+#define RESET_GE2D 70
+#define RESET_PARSER_REG 71
+#define RESET_PARSER_FETCH 72
+#define RESET_PARSER_CTL 73
+#define RESET_PARSER_TOP 74
+#define RESET_HDMI_APB 75
+#define RESET_AUDIO_APB 76
+#define RESET_MEDIA_CPU 77
+#define RESET_MALI 78
+#define RESET_HDMI_SYSTEM_RESET 79
+/* 80-95 */
+/* RESET3 */
+#define RESET_RING_OSCILLATOR 96
+#define RESET_SYS_CPU_0 97
+#define RESET_EFUSE 98
+#define RESET_SYS_CPU_BVCI 99
+#define RESET_AIFIFO 100
+#define RESET_AUDIO_PLL_MODULATOR 101
+#define RESET_AHB_BRIDGE_CNTL 102
+#define RESET_SYS_CPU_1 103
+#define RESET_AUDIO_DAC 104
+#define RESET_DEMUX_TOP 105
+#define RESET_DEMUX_DES 106
+#define RESET_DEMUX_S2P_0 107
+#define RESET_DEMUX_S2P_1 108
+#define RESET_DEMUX_RESET_0 109
+#define RESET_DEMUX_RESET_1 110
+#define RESET_DEMUX_RESET_2 111
+/* 112-127 */
+/* RESET4 */
+#define RESET_PL310 128
+#define RESET_A5_APB 129
+#define RESET_A5_AXI 130
+#define RESET_A5 131
+#define RESET_DVIN 132
+#define RESET_RDMA 133
+#define RESET_VENCI 134
+#define RESET_VENCP 135
+#define RESET_VENCT 136
+#define RESET_VDAC_4 137
+#define RESET_RTC 138
+#define RESET_A5_DEBUG 139
+#define RESET_VDI6 140
+#define RESET_VENCL 141
+/* 142-159 */
+/* RESET5 */
+#define RESET_DDR_PLL 160
+#define RESET_MISC_PLL 161
+#define RESET_SYS_PLL 162
+#define RESET_HPLL_PLL 163
+#define RESET_AUDIO_PLL 164
+#define RESET_VID2_PLL 165
+/* 166-191 */
+/* RESET6 */
+#define RESET_PERIPHS_GENERAL 192
+#define RESET_PERIPHS_IR_REMOTE 193
+#define RESET_PERIPHS_SMART_CARD 194
+#define RESET_PERIPHS_SAR_ADC 195
+#define RESET_PERIPHS_I2C_MASTER_0 196
+#define RESET_PERIPHS_I2C_MASTER_1 197
+#define RESET_PERIPHS_I2C_SLAVE 198
+#define RESET_PERIPHS_STREAM_INTERFACE 199
+#define RESET_PERIPHS_SDIO 200
+#define RESET_PERIPHS_UART_0 201
+#define RESET_PERIPHS_UART_1 202
+#define RESET_PERIPHS_ASYNC_0 203
+#define RESET_PERIPHS_ASYNC_1 204
+#define RESET_PERIPHS_SPI_0 205
+#define RESET_PERIPHS_SPI_1 206
+#define RESET_PERIPHS_LED_PWM 207
+/* 208-223 */
+/* RESET7 */
+/* 224-255 */
+
+#endif
diff --git a/include/dt-bindings/reset/hisi,hi6220-resets.h b/include/dt-bindings/reset/hisi,hi6220-resets.h
index ca08a7e5248e..322ec5335b65 100644
--- a/include/dt-bindings/reset/hisi,hi6220-resets.h
+++ b/include/dt-bindings/reset/hisi,hi6220-resets.h
@@ -64,4 +64,12 @@
#define PERIPH_RSDIST9_CARM_SOCDBG 0x507
#define PERIPH_RSDIST9_CARM_ETM 0x508
+#define MEDIA_G3D 0
+#define MEDIA_CODEC_VPU 2
+#define MEDIA_CODEC_JPEG 3
+#define MEDIA_ISP 4
+#define MEDIA_ADE 5
+#define MEDIA_MMU 6
+#define MEDIA_XG2RAM1 7
+
#endif /*_DT_BINDINGS_RESET_CONTROLLER_HI6220*/
diff --git a/include/dt-bindings/reset/ti-syscon.h b/include/dt-bindings/reset/ti-syscon.h
new file mode 100644
index 000000000000..884fd91df8e9
--- /dev/null
+++ b/include/dt-bindings/reset/ti-syscon.h
@@ -0,0 +1,38 @@
+/*
+ * TI Syscon Reset definitions
+ *
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DT_BINDINGS_RESET_TI_SYSCON_H__
+#define __DT_BINDINGS_RESET_TI_SYSCON_H__
+
+/*
+ * The reset does not support the feature and corresponding
+ * values are not valid
+ */
+#define ASSERT_NONE (1 << 0)
+#define DEASSERT_NONE (1 << 1)
+#define STATUS_NONE (1 << 2)
+
+/* When set this function is activated by setting(vs clearing) this bit */
+#define ASSERT_SET (1 << 3)
+#define DEASSERT_SET (1 << 4)
+#define STATUS_SET (1 << 5)
+
+/* The following are the inverse of the above and are added for consistency */
+#define ASSERT_CLEAR (0 << 3)
+#define DEASSERT_CLEAR (0 << 4)
+#define STATUS_CLEAR (0 << 5)
+
+#endif
diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h
index 689312745b2f..01024d1aed0e 100644
--- a/include/linux/mfd/abx500/ab8500-sysctrl.h
+++ b/include/linux/mfd/abx500/ab8500-sysctrl.h
@@ -37,12 +37,6 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits)
return ab8500_sysctrl_write(reg, bits, 0);
}
-/* Configuration data for SysClkReq1RfClkBuf - SysClkReq8RfClkBuf */
-struct ab8500_sysctrl_platform_data {
- u8 initial_req_buf_config[8];
- u16 (*reboot_reason_code)(const char *cmd);
-};
-
/* Registers */
#define AB8500_TURNONSTATUS 0x100
#define AB8500_RESETSTATUS 0x101
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
index bf5109d38a26..5d374601404c 100644
--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -178,16 +178,6 @@ enum ddr_pwrst {
#define DB8500_PRCMU_LEGACY_OFFSET 0xDD4
-struct prcmu_pdata
-{
- bool enable_set_ddr_opp;
- bool enable_ape_opp_100_voltage;
- struct ab8500_platform_data *ab_platdata;
- u32 version_offset;
- u32 legacy_offset;
- u32 adt_offset;
-};
-
#define PRCMU_FW_PROJECT_U8500 2
#define PRCMU_FW_PROJECT_U8400 3
#define PRCMU_FW_PROJECT_U9500 4 /* Customer specific */
diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h
deleted file mode 100644
index 3af0da1f3be5..000000000000
--- a/include/linux/platform_data/clk-ux500.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Clock definitions for ux500 platforms
- *
- * Copyright (C) 2012 ST-Ericsson SA
- * Author: Ulf Hansson <ulf.hansson@linaro.org>
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __CLK_UX500_H
-#define __CLK_UX500_H
-
-void u8500_clk_init(void);
-void u9540_clk_init(void);
-void u8540_clk_init(void);
-
-#endif /* __CLK_UX500_H */
diff --git a/include/linux/platform_data/media/ir-rx51.h b/include/linux/platform_data/media/ir-rx51.h
index 3038120ca46e..812d87307877 100644
--- a/include/linux/platform_data/media/ir-rx51.h
+++ b/include/linux/platform_data/media/ir-rx51.h
@@ -2,10 +2,7 @@
#define _LIRC_RX51_H
struct lirc_rx51_platform_data {
- int pwm_timer;
-
int(*set_max_mpu_wakeup_lat)(struct device *dev, long t);
- struct pwm_omap_dmtimer_pdata *dmtimer;
};
#endif
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index 9e12000914b3..cc32ab852fbc 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -29,6 +29,14 @@ extern bool qcom_scm_hdcp_available(void);
extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
u32 *resp);
+extern bool qcom_scm_pas_supported(u32 peripheral);
+extern int qcom_scm_pas_init_image(u32 peripheral, const void *metadata,
+ size_t size);
+extern int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr,
+ phys_addr_t size);
+extern int qcom_scm_pas_auth_and_reset(u32 peripheral);
+extern int qcom_scm_pas_shutdown(u32 peripheral);
+
#define QCOM_SCM_CPU_PWR_DOWN_L2_ON 0x0
#define QCOM_SCM_CPU_PWR_DOWN_L2_OFF 0x1
diff --git a/include/linux/reset-controller.h b/include/linux/reset-controller.h
index b91ba932bbd4..db1fe6772ad5 100644
--- a/include/linux/reset-controller.h
+++ b/include/linux/reset-controller.h
@@ -53,4 +53,8 @@ struct reset_controller_dev {
int reset_controller_register(struct reset_controller_dev *rcdev);
void reset_controller_unregister(struct reset_controller_dev *rcdev);
+struct device;
+int devm_reset_controller_register(struct device *dev,
+ struct reset_controller_dev *rcdev);
+
#endif
diff --git a/include/linux/reset.h b/include/linux/reset.h
index 45a4abeb6acb..5daff15722d3 100644
--- a/include/linux/reset.h
+++ b/include/linux/reset.h
@@ -71,14 +71,14 @@ static inline struct reset_control *__of_reset_control_get(
struct device_node *node,
const char *id, int index, int shared)
{
- return ERR_PTR(-EINVAL);
+ return ERR_PTR(-ENOTSUPP);
}
static inline struct reset_control *__devm_reset_control_get(
struct device *dev,
const char *id, int index, int shared)
{
- return ERR_PTR(-EINVAL);
+ return ERR_PTR(-ENOTSUPP);
}
#endif /* CONFIG_RESET_CONTROLLER */
diff --git a/include/linux/scpi_protocol.h b/include/linux/scpi_protocol.h
index 35de50a65665..dc5f989be226 100644
--- a/include/linux/scpi_protocol.h
+++ b/include/linux/scpi_protocol.h
@@ -70,6 +70,8 @@ struct scpi_ops {
int (*sensor_get_capability)(u16 *sensors);
int (*sensor_get_info)(u16 sensor_id, struct scpi_sensor_info *);
int (*sensor_get_value)(u16, u64 *);
+ int (*device_get_power_state)(u16);
+ int (*device_set_power_state)(u16, u8);
};
#if IS_REACHABLE(CONFIG_ARM_SCPI_PROTOCOL)
diff --git a/include/linux/soc/qcom/wcnss_ctrl.h b/include/linux/soc/qcom/wcnss_ctrl.h
new file mode 100644
index 000000000000..a37bc5538f19
--- /dev/null
+++ b/include/linux/soc/qcom/wcnss_ctrl.h
@@ -0,0 +1,8 @@
+#ifndef __WCNSS_CTRL_H__
+#define __WCNSS_CTRL_H__
+
+#include <linux/soc/qcom/smd.h>
+
+struct qcom_smd_channel *qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb);
+
+#endif
diff --git a/include/soc/tegra/cpuidle.h b/include/soc/tegra/cpuidle.h
index ea04f4225638..1fae9c7800d1 100644
--- a/include/soc/tegra/cpuidle.h
+++ b/include/soc/tegra/cpuidle.h
@@ -14,7 +14,7 @@
#ifndef __SOC_TEGRA_CPUIDLE_H__
#define __SOC_TEGRA_CPUIDLE_H__
-#ifdef CONFIG_CPU_IDLE
+#if defined(CONFIG_ARM) && defined(CONFIG_CPU_IDLE)
void tegra_cpuidle_pcie_irqs_in_use(void);
#else
static inline void tegra_cpuidle_pcie_irqs_in_use(void)
diff --git a/sound/soc/codecs/ab8500-codec.c b/sound/soc/codecs/ab8500-codec.c
index 8b1d0c1a7839..2fc89155f14a 100644
--- a/sound/soc/codecs/ab8500-codec.c
+++ b/sound/soc/codecs/ab8500-codec.c
@@ -2464,45 +2464,20 @@ static int ab8500_codec_probe(struct snd_soc_codec *codec)
struct device *dev = codec->dev;
struct device_node *np = dev->of_node;
struct ab8500_codec_drvdata *drvdata = dev_get_drvdata(dev);
- struct ab8500_platform_data *pdata;
+ struct ab8500_codec_platform_data codec_pdata;
struct filter_control *fc;
int status;
dev_dbg(dev, "%s: Enter.\n", __func__);
- /* Setup AB8500 according to board-settings */
- pdata = dev_get_platdata(dev->parent);
+ ab8500_codec_of_probe(dev, np, &codec_pdata);
- if (np) {
- if (!pdata)
- pdata = devm_kzalloc(dev,
- sizeof(struct ab8500_platform_data),
- GFP_KERNEL);
-
- if (pdata && !pdata->codec)
- pdata->codec
- = devm_kzalloc(dev,
- sizeof(struct ab8500_codec_platform_data),
- GFP_KERNEL);
-
- if (!(pdata && pdata->codec))
- return -ENOMEM;
-
- ab8500_codec_of_probe(dev, np, pdata->codec);
-
- } else {
- if (!(pdata && pdata->codec)) {
- dev_err(dev, "No codec platform data or DT found\n");
- return -EINVAL;
- }
- }
-
- status = ab8500_audio_setup_mics(codec, &pdata->codec->amics);
+ status = ab8500_audio_setup_mics(codec, &codec_pdata.amics);
if (status < 0) {
pr_err("%s: Failed to setup mics (%d)!\n", __func__, status);
return status;
}
- status = ab8500_audio_set_ear_cmv(codec, pdata->codec->ear_cmv);
+ status = ab8500_audio_set_ear_cmv(codec, codec_pdata.ear_cmv);
if (status < 0) {
pr_err("%s: Failed to set earpiece CM-voltage (%d)!\n",
__func__, status);