diff options
| -rw-r--r-- | Documentation/EDID/1024x768.S | 44 | ||||
| -rw-r--r-- | Documentation/EDID/1280x1024.S | 44 | ||||
| -rw-r--r-- | Documentation/EDID/1680x1050.S | 44 | ||||
| -rw-r--r-- | Documentation/EDID/1920x1080.S | 44 | ||||
| -rw-r--r-- | Documentation/EDID/HOWTO.txt | 39 | ||||
| -rw-r--r-- | Documentation/EDID/Makefile | 26 | ||||
| -rw-r--r-- | Documentation/EDID/edid.S | 261 | ||||
| -rw-r--r-- | Documentation/EDID/hex | 1 | ||||
| -rw-r--r-- | Documentation/kernel-parameters.txt | 15 | ||||
| -rw-r--r-- | drivers/gpu/drm/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/gpu/drm/Makefile | 1 | ||||
| -rw-r--r-- | drivers/gpu/drm/drm_crtc_helper.c | 8 | ||||
| -rw-r--r-- | drivers/gpu/drm/drm_edid.c | 4 | ||||
| -rw-r--r-- | drivers/gpu/drm/drm_edid_load.c | 250 | ||||
| -rw-r--r-- | include/drm/drm_crtc.h | 1 | ||||
| -rw-r--r-- | include/drm/drm_edid.h | 1 |
16 files changed, 792 insertions, 3 deletions
diff --git a/Documentation/EDID/1024x768.S b/Documentation/EDID/1024x768.S new file mode 100644 index 000000000000..4b486fe31b32 --- /dev/null +++ b/Documentation/EDID/1024x768.S @@ -0,0 +1,44 @@ +/* + 1024x768.S: EDID data set for standard 1024x768 60 Hz monitor + + Copyright (C) 2011 Carsten Emde <C.Emde@osadl.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. +*/ + +/* EDID */ +#define VERSION 1 +#define REVISION 3 + +/* Display */ +#define CLOCK 65000 /* kHz */ +#define XPIX 1024 +#define YPIX 768 +#define XY_RATIO XY_RATIO_4_3 +#define XBLANK 320 +#define YBLANK 38 +#define XOFFSET 8 +#define XPULSE 144 +#define YOFFSET (63+3) +#define YPULSE (63+6) +#define DPI 72 +#define VFREQ 60 /* Hz */ +#define TIMING_NAME "Linux XGA" +#define ESTABLISHED_TIMINGS_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */ +#define HSYNC_POL 0 +#define VSYNC_POL 0 +#define CRC 0x55 + +#include "edid.S" diff --git a/Documentation/EDID/1280x1024.S b/Documentation/EDID/1280x1024.S new file mode 100644 index 000000000000..a2799fe33a4d --- /dev/null +++ b/Documentation/EDID/1280x1024.S @@ -0,0 +1,44 @@ +/* + 1280x1024.S: EDID data set for standard 1280x1024 60 Hz monitor + + Copyright (C) 2011 Carsten Emde <C.Emde@osadl.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. +*/ + +/* EDID */ +#define VERSION 1 +#define REVISION 3 + +/* Display */ +#define CLOCK 108000 /* kHz */ +#define XPIX 1280 +#define YPIX 1024 +#define XY_RATIO XY_RATIO_5_4 +#define XBLANK 408 +#define YBLANK 42 +#define XOFFSET 48 +#define XPULSE 112 +#define YOFFSET (63+1) +#define YPULSE (63+3) +#define DPI 72 +#define VFREQ 60 /* Hz */ +#define TIMING_NAME "Linux SXGA" +#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +#define HSYNC_POL 1 +#define VSYNC_POL 1 +#define CRC 0xa0 + +#include "edid.S" diff --git a/Documentation/EDID/1680x1050.S b/Documentation/EDID/1680x1050.S new file mode 100644 index 000000000000..96f67cafcf2e --- /dev/null +++ b/Documentation/EDID/1680x1050.S @@ -0,0 +1,44 @@ +/* + 1680x1050.S: EDID data set for standard 1680x1050 60 Hz monitor + + Copyright (C) 2012 Carsten Emde <C.Emde@osadl.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. +*/ + +/* EDID */ +#define VERSION 1 +#define REVISION 3 + +/* Display */ +#define CLOCK 146250 /* kHz */ +#define XPIX 1680 +#define YPIX 1050 +#define XY_RATIO XY_RATIO_16_10 +#define XBLANK 560 +#define YBLANK 39 +#define XOFFSET 104 +#define XPULSE 176 +#define YOFFSET (63+3) +#define YPULSE (63+6) +#define DPI 96 +#define VFREQ 60 /* Hz */ +#define TIMING_NAME "Linux WSXGA" +#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +#define HSYNC_POL 1 +#define VSYNC_POL 1 +#define CRC 0x26 + +#include "edid.S" diff --git a/Documentation/EDID/1920x1080.S b/Documentation/EDID/1920x1080.S new file mode 100644 index 000000000000..36ed5d571d0a --- /dev/null +++ b/Documentation/EDID/1920x1080.S @@ -0,0 +1,44 @@ +/* + 1920x1080.S: EDID data set for standard 1920x1080 60 Hz monitor + + Copyright (C) 2012 Carsten Emde <C.Emde@osadl.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. +*/ + +/* EDID */ +#define VERSION 1 +#define REVISION 3 + +/* Display */ +#define CLOCK 148500 /* kHz */ +#define XPIX 1920 +#define YPIX 1080 +#define XY_RATIO XY_RATIO_16_9 +#define XBLANK 280 +#define YBLANK 45 +#define XOFFSET 88 +#define XPULSE 44 +#define YOFFSET (63+4) +#define YPULSE (63+5) +#define DPI 96 +#define VFREQ 60 /* Hz */ +#define TIMING_NAME "Linux FHD" +#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +#define HSYNC_POL 1 +#define VSYNC_POL 1 +#define CRC 0x05 + +#include "edid.S" diff --git a/Documentation/EDID/HOWTO.txt b/Documentation/EDID/HOWTO.txt new file mode 100644 index 000000000000..75a9f2a0c43d --- /dev/null +++ b/Documentation/EDID/HOWTO.txt @@ -0,0 +1,39 @@ +In the good old days when graphics parameters were configured explicitly +in a file called xorg.conf, even broken hardware could be managed. + +Today, with the advent of Kernel Mode Setting, a graphics board is +either correctly working because all components follow the standards - +or the computer is unusable, because the screen remains dark after +booting or it displays the wrong area. Cases when this happens are: +- The graphics board does not recognize the monitor. +- The graphics board is unable to detect any EDID data. +- The graphics board incorrectly forwards EDID data to the driver. +- The monitor sends no or bogus EDID data. +- A KVM sends its own EDID data instead of querying the connected monitor. +Adding the kernel parameter "nomodeset" helps in most cases, but causes +restrictions later on. + +As a remedy for such situations, the kernel configuration item +CONFIG_DRM_LOAD_EDID_FIRMWARE was introduced. It allows to provide an +individually prepared or corrected EDID data set in the /lib/firmware +directory from where it is loaded via the firmware interface. The code +(see drivers/gpu/drm/drm_edid_load.c) contains built-in data sets for +commonly used screen resolutions (1024x768, 1280x1024, 1680x1050, +1920x1080) as binary blobs, but the kernel source tree does not contain +code to create these data. In order to elucidate the origin of the +built-in binary EDID blobs and to facilitate the creation of individual +data for a specific misbehaving monitor, commented sources and a +Makefile environment are given here. + +To create binary EDID and C source code files from the existing data +material, simply type "make". + +If you want to create your own EDID file, copy the file 1024x768.S and +replace the settings with your own data. The CRC value in the last line + #define CRC 0x55 +is a bit tricky. After a first version of the binary data set is +created, it must be be checked with the "edid-decode" utility which will +most probably complain about a wrong CRC. Fortunately, the utility also +displays the correct CRC which must then be inserted into the source +file. After the make procedure is repeated, the EDID data set is ready +to be used. diff --git a/Documentation/EDID/Makefile b/Documentation/EDID/Makefile new file mode 100644 index 000000000000..17763ca3f12b --- /dev/null +++ b/Documentation/EDID/Makefile @@ -0,0 +1,26 @@ + +SOURCES := $(wildcard [0-9]*x[0-9]*.S) + +BIN := $(patsubst %.S, %.bin, $(SOURCES)) + +IHEX := $(patsubst %.S, %.bin.ihex, $(SOURCES)) + +CODE := $(patsubst %.S, %.c, $(SOURCES)) + +all: $(BIN) $(IHEX) $(CODE) + +clean: + @rm -f *.o *.bin.ihex *.bin *.c + +%.o: %.S + @cc -c $^ + +%.bin: %.o + @objcopy -Obinary $^ $@ + +%.bin.ihex: %.o + @objcopy -Oihex $^ $@ + @dos2unix $@ 2>/dev/null + +%.c: %.bin + @echo "{" >$@; hexdump -f hex $^ >>$@; echo "};" >>$@ diff --git a/Documentation/EDID/edid.S b/Documentation/EDID/edid.S new file mode 100644 index 000000000000..ea97ae275fca --- /dev/null +++ b/Documentation/EDID/edid.S @@ -0,0 +1,261 @@ +/* + edid.S: EDID data template + + Copyright (C) 2012 Carsten Emde <C.Emde@osadl.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. +*/ + + +/* Manufacturer */ +#define MFG_LNX1 'L' +#define MFG_LNX2 'N' +#define MFG_LNX3 'X' +#define SERIAL 0 +#define YEAR 2012 +#define WEEK 5 + +/* EDID 1.3 standard definitions */ +#define XY_RATIO_16_10 0b00 +#define XY_RATIO_4_3 0b01 +#define XY_RATIO_5_4 0b10 +#define XY_RATIO_16_9 0b11 + +#define mfgname2id(v1,v2,v3) \ + ((((v1-'@')&0x1f)<<10)+(((v2-'@')&0x1f)<<5)+((v3-'@')&0x1f)) +#define swap16(v1) ((v1>>8)+((v1&0xff)<<8)) +#define msbs2(v1,v2) ((((v1>>8)&0x0f)<<4)+((v2>>8)&0x0f)) +#define msbs4(v1,v2,v3,v4) \ + (((v1&0x03)>>2)+((v2&0x03)>>4)+((v3&0x03)>>6)+((v4&0x03)>>8)) +#define pixdpi2mm(pix,dpi) ((pix*25)/dpi) +#define xsize pixdpi2mm(XPIX,DPI) +#define ysize pixdpi2mm(YPIX,DPI) + + .data + +/* Fixed header pattern */ +header: .byte 0x00,0xff,0xff,0xff,0xff,0xff,0xff,0x00 + +mfg_id: .word swap16(mfgname2id(MFG_LNX1, MFG_LNX2, MFG_LNX3)) + +prod_code: .word 0 + +/* Serial number. 32 bits, little endian. */ +serial_number: .long SERIAL + +/* Week of manufacture */ +week: .byte WEEK + +/* Year of manufacture, less 1990. (1990-2245) + If week=255, it is the model year instead */ +year: .byte YEAR-1990 + +version: .byte VERSION /* EDID version, usually 1 (for 1.3) */ +revision: .byte REVISION /* EDID revision, usually 3 (for 1.3) */ + +/* If Bit 7=1 Digital input. If set, the following bit definitions apply: + Bits 6-1 Reserved, must be 0 + Bit 0 Signal is compatible with VESA DFP 1.x TMDS CRGB, + 1 pixel per clock, up to 8 bits per color, MSB aligned, + If Bit 7=0 Analog input. If clear, the following bit definitions apply: + Bits 6-5 Video white and sync levels, relative to blank + 00=+0.7/-0.3 V; 01=+0.714/-0.286 V; + 10=+1.0/-0.4 V; 11=+0.7/0 V + Bit 4 Blank-to-black setup (pedestal) expected + Bit 3 Separate sync supported + Bit 2 Composite sync (on HSync) supported + Bit 1 Sync on green supported + Bit 0 VSync pulse must be serrated when somposite or + sync-on-green is used. */ +video_parms: .byte 0x6d + +/* Maximum horizontal image size, in centimetres + (max 292 cm/115 in at 16:9 aspect ratio) */ +max_hor_size: .byte xsize/10 + +/* Maximum vertical image size, in centimetres. + If either byte is 0, undefined (e.g. projector) */ +max_vert_size: .byte ysize/10 + +/* Display gamma, minus 1, times 100 (range 1.00-3.5 */ +gamma: .byte 120 + +/* Bit 7 DPMS standby supported + Bit 6 DPMS suspend supported + Bit 5 DPMS active-off supported + Bits 4-3 Display type: 00=monochrome; 01=RGB colour; + 10=non-RGB multicolour; 11=undefined + Bit 2 Standard sRGB colour space. Bytes 25-34 must contain + sRGB standard values. + Bit 1 Preferred timing mode specified in descriptor block 1. + Bit 0 GTF supported with default parameter values. */ +dsp_features: .byte 0xea + +/* Chromaticity coordinates. */ +/* Red and green least-significant bits + Bits 7-6 Red x value least-significant 2 bits + Bits 5-4 Red y value least-significant 2 bits + Bits 3-2 Green x value lst-significant 2 bits + Bits 1-0 Green y value least-significant 2 bits */ +red_green_lsb: .byte 0x5e + +/* Blue and white least-significant 2 bits */ +blue_white_lsb: .byte 0xc0 + +/* Red x value most significant 8 bits. + 0-255 encodes 0-0.996 (255/256); 0-0.999 (1023/1024) with lsbits */ +red_x_msb: .byte 0xa4 + +/* Red y value most significant 8 bits */ +red_y_msb: .byte 0x59 + +/* Green x and y value most significant 8 bits */ +green_x_y_msb: .byte 0x4a,0x98 + +/* Blue x and y value most significant 8 bits */ +blue_x_y_msb: .byte 0x25,0x20 + +/* Default white point x and y value most significant 8 bits */ +white_x_y_msb: .byte 0x50,0x54 + +/* Established timings */ +/* Bit 7 720x400 @ 70 Hz + Bit 6 720x400 @ 88 Hz + Bit 5 640x480 @ 60 Hz + Bit 4 640x480 @ 67 Hz + Bit 3 640x480 @ 72 Hz + Bit 2 640x480 @ 75 Hz + Bit 1 800x600 @ 56 Hz + Bit 0 800x600 @ 60 Hz */ +estbl_timing1: .byte 0x00 + +/* Bit 7 800x600 @ 72 Hz + Bit 6 800x600 @ 75 Hz + Bit 5 832x624 @ 75 Hz + Bit 4 1024x768 @ 87 Hz, interlaced (1024x768) + Bit 3 1024x768 @ 60 Hz + Bit 2 1024x768 @ 72 Hz + Bit 1 1024x768 @ 75 Hz + Bit 0 1280x1024 @ 75 Hz */ +estbl_timing2: .byte ESTABLISHED_TIMINGS_BITS + +/* Bit 7 1152x870 @ 75 Hz (Apple Macintosh II) + Bits 6-0 Other manufacturer-specific display mod */ +estbl_timing3: .byte 0x00 + +/* Standard timing */ +/* X resolution, less 31, divided by 8 (256-2288 pixels) */ +std_xres: .byte (XPIX/8)-31 +/* Y resolution, X:Y pixel ratio + Bits 7-6 X:Y pixel ratio: 00=16:10; 01=4:3; 10=5:4; 11=16:9. + Bits 5-0 Vertical frequency, less 60 (60-123 Hz) */ +std_vres: .byte (XY_RATIO<<6)+VFREQ-60 + .fill 7,2,0x0101 /* Unused */ + +descriptor1: +/* Pixel clock in 10 kHz units. (0.-655.35 MHz, little-endian) */ +clock: .word CLOCK/10 + +/* Horizontal active pixels 8 lsbits (0-4095) */ +x_act_lsb: .byte XPIX&0xff +/* Horizontal blanking pixels 8 lsbits (0-4095) + End of active to start of next active. */ +x_blk_lsb: .byte XBLANK&0xff +/* Bits 7-4 Horizontal active pixels 4 msbits + Bits 3-0 Horizontal blanking pixels 4 msbits */ +x_msbs: .byte msbs2(XPIX,XBLANK) + +/* Vertical active lines 8 lsbits (0-4095) */ +y_act_lsb: .byte YPIX&0xff +/* Vertical blanking lines 8 lsbits (0-4095) */ +y_blk_lsb: .byte YBLANK&0xff +/* Bits 7-4 Vertical active lines 4 msbits + Bits 3-0 Vertical blanking lines 4 msbits */ +y_msbs: .byte msbs2(YPIX,YBLANK) + +/* Horizontal sync offset pixels 8 lsbits (0-1023) From blanking start */ +x_snc_off_lsb: .byte XOFFSET&0xff +/* Horizontal sync pulse width pixels 8 lsbits (0-1023) */ +x_snc_pls_lsb: .byte XPULSE&0xff +/* Bits 7-4 Vertical sync offset lines 4 lsbits -63) + Bits 3-0 Vertical sync pulse width lines 4 lsbits -63) */ +y_snc_lsb: .byte ((YOFFSET-63)<<4)+(YPULSE-63) +/* Bits 7-6 Horizontal sync offset pixels 2 msbits + Bits 5-4 Horizontal sync pulse width pixels 2 msbits + Bits 3-2 Vertical sync offset lines 2 msbits + Bits 1-0 Vertical sync pulse width lines 2 msbits */ +xy_snc_msbs: .byte msbs4(XOFFSET,XPULSE,YOFFSET,YPULSE) + +/* Horizontal display size, mm, 8 lsbits (0-4095 mm, 161 in) */ +x_dsp_size: .byte xsize&0xff + +/* Vertical display size, mm, 8 lsbits (0-4095 mm, 161 in) */ +y_dsp_size: .byte ysize&0xff + +/* Bits 7-4 Horizontal display size, mm, 4 msbits + Bits 3-0 Vertical display size, mm, 4 msbits */ +dsp_size_mbsb: .byte msbs2(xsize,ysize) + +/* Horizontal border pixels (each side; total is twice this) */ +x_border: .byte 0 +/* Vertical border lines (each side; total is twice this) */ +y_border: .byte 0 + +/* Bit 7 Interlaced + Bits 6-5 Stereo mode: 00=No stereo; other values depend on bit 0: + Bit 0=0: 01=Field sequential, sync=1 during right; 10=similar, + sync=1 during left; 11=4-way interleaved stereo + Bit 0=1 2-way interleaved stereo: 01=Right image on even lines; + 10=Left image on even lines; 11=side-by-side + Bits 4-3 Sync type: 00=Analog composite; 01=Bipolar analog composite; + 10=Digital composite (on HSync); 11=Digital separate + Bit 2 If digital separate: Vertical sync polarity (1=positive) + Other types: VSync serrated (HSync during VSync) + Bit 1 If analog sync: Sync on all 3 RGB lines (else green only) + Digital: HSync polarity (1=positive) + Bit 0 2-way line-interleaved stereo, if bits 4-3 are not 00. */ +features: .byte 0x18+(VSYNC_POL<<2)+(HSYNC_POL<<1) + +descriptor2: .byte 0,0 /* Not a detailed timing descriptor */ + .byte 0 /* Must be zero */ + .byte 0xff /* Descriptor is monitor serial number (text) */ + .byte 0 /* Must be zero */ +start1: .ascii "Linux #0" +end1: .byte 0x0a /* End marker */ + .fill 12-(end1-start1), 1, 0x20 /* Padded spaces */ +descriptor3: .byte 0,0 /* Not a detailed timing descriptor */ + .byte 0 /* Must be zero */ + .byte 0xfd /* Descriptor is monitor range limits */ + .byte 0 /* Must be zero */ +start2: .byte VFREQ-1 /* Minimum vertical field rate (1-255 Hz) */ + .byte VFREQ+1 /* Maximum vertical field rate (1-255 Hz) */ + .byte (CLOCK/(XPIX+XBLANK))-1 /* Minimum horizontal line rate + (1-255 kHz) */ + .byte (CLOCK/(XPIX+XBLANK))+1 /* Maximum horizontal line rate + (1-255 kHz) */ + .byte (CLOCK/10000)+1 /* Maximum pixel clock rate, rounded up + to 10 MHz multiple (10-2550 MHz) */ + .byte 0 /* No extended timing information type */ +end2: .byte 0x0a /* End marker */ + .fill 12-(end2-start2), 1, 0x20 /* Padded spaces */ +descriptor4: .byte 0,0 /* Not a detailed timing descriptor */ + .byte 0 /* Must be zero */ + .byte 0xfc /* Descriptor is text */ + .byte 0 /* Must be zero */ +start3: .ascii TIMING_NAME +end3: .byte 0x0a /* End marker */ + .fill 12-(end3-start3), 1, 0x20 /* Padded spaces */ +extensions: .byte 0 /* Number of extensions to follow */ +checksum: .byte CRC /* Sum of all bytes must be 0 */ diff --git a/Documentation/EDID/hex b/Documentation/EDID/hex new file mode 100644 index 000000000000..8873ebb618af --- /dev/null +++ b/Documentation/EDID/hex @@ -0,0 +1 @@ +"\t" 8/1 "0x%02x, " "\n" diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index d99fd9c0ec0e..7f084b764fb9 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -713,6 +713,21 @@ bytes respectively. Such letter suffixes can also be entirely omitted. The filter can be disabled or changed to another driver later using sysfs. + drm_kms_helper.edid_firmware=[<connector>:]<file> + Broken monitors, graphic adapters and KVMs may + send no or incorrect EDID data sets. This parameter + allows to specify an EDID data set in the + /lib/firmware directory that is used instead. + Generic built-in EDID data sets are used, if one of + edid/1024x768.bin, edid/1280x1024.bin, + edid/1680x1050.bin, or edid/1920x1080.bin is given + and no file with the same name exists. Details and + instructions how to build your own EDID data are + available in Documentation/EDID/HOWTO.txt. An EDID + data set will only be used for a particular connector, + if its name and a colon are prepended to the EDID + name. + dscc4.setup= [NET] earlycon= [KNL] Output early console device and options. diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 6b358d1dfb24..87ca18b82e15 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -32,6 +32,18 @@ config DRM_KMS_HELPER help FB and CRTC helpers for KMS drivers. +config DRM_LOAD_EDID_FIRMWARE + bool "Allow to specify an EDID data set instead of probing for it" + depends on DRM_KMS_HELPER + help + Say Y here, if you want to use EDID data to be loaded from the + /lib/firmware directory or one of the provided built-in + data sets. This may be necessary, if the graphics adapter or + monitor are unable to provide appropriate EDID data. Since this + feature is provided as a workaround for broken hardware, the + default case is N. Details and instructions how to build your own + EDID data are given in Documentation/EDID/HOWTO.txt. + config DRM_TTM tristate depends on DRM diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 3b8be8939bb6..a858532806ae 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -19,6 +19,7 @@ drm-$(CONFIG_COMPAT) += drm_ioc32.o drm-usb-y := drm_usb.o drm_kms_helper-y := drm_fb_helper.o drm_crtc_helper.o drm_dp_i2c_helper.o +drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o obj-$(CONFIG_DRM_KMS_HELPER) += drm_kms_helper.o diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index d9d66846c610..81118893264c 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -37,6 +37,7 @@ #include "drm_fourcc.h" #include "drm_crtc_helper.h" #include "drm_fb_helper.h" +#include "drm_edid.h" static bool drm_kms_helper_poll = true; module_param_named(poll, drm_kms_helper_poll, bool, 0600); @@ -118,7 +119,12 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector, goto prune; } - count = (*connector_funcs->get_modes)(connector); +#ifdef CONFIG_DRM_LOAD_EDID_FIRMWARE + count = drm_load_edid_firmware(connector); + if (count == 0) +#endif + count = (*connector_funcs->get_modes)(connector); + if (count == 0 && connector->status == connector_status_connected) count = drm_add_modes_noedid(connector, 1024, 768); if (count == 0) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 7ee7be1e5ce6..7a1434aeffc4 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -149,8 +149,7 @@ EXPORT_SYMBOL(drm_edid_header_is_valid); * Sanity check the EDID block (base or extension). Return 0 if the block * doesn't check out, or 1 if it's valid. */ -static bool -drm_edid_block_valid(u8 *raw_edid) +bool drm_edid_block_valid(u8 *raw_edid) { int i; u8 csum = 0; @@ -203,6 +202,7 @@ bad: } return 0; } +EXPORT_SYMBOL(drm_edid_block_valid); /** * drm_edid_is_valid - sanity check EDID data diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c new file mode 100644 index 000000000000..da9acba2dd6c --- /dev/null +++ b/drivers/gpu/drm/drm_edid_load.c @@ -0,0 +1,250 @@ +/* + drm_edid_load.c: use a built-in EDID data set or load it via the firmware + interface + + Copyright (C) 2012 Carsten Emde <C.Emde@osadl.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. +*/ + +#include <linux/module.h> +#include <linux/firmware.h> +#include "drmP.h" +#include "drm_crtc.h" +#include "drm_crtc_helper.h" +#include "drm_edid.h" + +static char edid_firmware[PATH_MAX]; +module_param_string(edid_firmware, edid_firmware, sizeof(edid_firmware), 0644); +MODULE_PARM_DESC(edid_firmware, "Do not probe monitor, use specified EDID blob " + "from built-in data or /lib/firmware instead. "); + +#define GENERIC_EDIDS 4 +static char *generic_edid_name[GENERIC_EDIDS] = { + "edid/1024x768.bin", + "edid/1280x1024.bin", + "edid/1680x1050.bin", + "edid/1920x1080.bin", +}; + +static u8 generic_edid[GENERIC_EDIDS][128] = { + { + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, + 0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x05, 0x16, 0x01, 0x03, 0x6d, 0x23, 0x1a, 0x78, + 0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25, + 0x20, 0x50, 0x54, 0x00, 0x08, 0x00, 0x61, 0x40, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x64, 0x19, + 0x00, 0x40, 0x41, 0x00, 0x26, 0x30, 0x08, 0x90, + 0x36, 0x00, 0x63, 0x0a, 0x11, 0x00, 0x00, 0x18, + 0x00, 0x00, 0x00, 0xff, 0x00, 0x4c, 0x69, 0x6e, + 0x75, 0x78, 0x20, 0x23, 0x30, 0x0a, 0x20, 0x20, + 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x3b, + 0x3d, 0x2f, 0x31, 0x07, 0x00, 0x0a, 0x20, 0x20, + 0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfc, + 0x00, 0x4c, 0x69, 0x6e, 0x75, 0x78, 0x20, 0x58, + 0x47, 0x41, 0x0a, 0x20, 0x20, 0x20, 0x00, 0x55, + }, + { + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, + 0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x05, 0x16, 0x01, 0x03, 0x6d, 0x2c, 0x23, 0x78, + 0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25, + 0x20, 0x50, 0x54, 0x00, 0x00, 0x00, 0x81, 0x80, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x30, 0x2a, + 0x00, 0x98, 0x51, 0x00, 0x2a, 0x40, 0x30, 0x70, + 0x13, 0x00, 0xbc, 0x63, 0x11, 0x00, 0x00, 0x1e, + 0x00, 0x00, 0x00, 0xff, 0x00, 0x4c, 0x69, 0x6e, + 0x75, 0x78, 0x20, 0x23, 0x30, 0x0a, 0x20, 0x20, + 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x3b, + 0x3d, 0x3e, 0x40, 0x0b, 0x00, 0x0a, 0x20, 0x20, + 0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfc, + 0x00, 0x4c, 0x69, 0x6e, 0x75, 0x78, 0x20, 0x53, + 0x58, 0x47, 0x41, 0x0a, 0x20, 0x20, 0x00, 0xa0, + }, + { + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, + 0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x05, 0x16, 0x01, 0x03, 0x6d, 0x2b, 0x1b, 0x78, + 0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25, + 0x20, 0x50, 0x54, 0x00, 0x00, 0x00, 0xb3, 0x00, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x21, 0x39, + 0x90, 0x30, 0x62, 0x1a, 0x27, 0x40, 0x68, 0xb0, + 0x36, 0x00, 0xb5, 0x11, 0x11, 0x00, 0x00, 0x1e, + 0x00, 0x00, 0x00, 0xff, 0x00, 0x4c, 0x69, 0x6e, + 0x75, 0x78, 0x20, 0x23, 0x30, 0x0a, 0x20, 0x20, + 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x3b, + 0x3d, 0x40, 0x42, 0x0f, 0x00, 0x0a, 0x20, 0x20, + 0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfc, + 0x00, 0x4c, 0x69, 0x6e, 0x75, 0x78, 0x20, 0x57, + 0x53, 0x58, 0x47, 0x41, 0x0a, 0x20, 0x00, 0x26, + }, + { + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, + 0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x05, 0x16, 0x01, 0x03, 0x6d, 0x32, 0x1c, 0x78, + 0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25, + 0x20, 0x50, 0x54, 0x00, 0x00, 0x00, 0xd1, 0xc0, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x3a, + 0x80, 0x18, 0x71, 0x38, 0x2d, 0x40, 0x58, 0x2c, + 0x45, 0x00, 0xf4, 0x19, 0x11, 0x00, 0x00, 0x1e, + 0x00, 0x00, 0x00, 0xff, 0x00, 0x4c, 0x69, 0x6e, + 0x75, 0x78, 0x20, 0x23, 0x30, 0x0a, 0x20, 0x20, + 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x3b, + 0x3d, 0x42, 0x44, 0x0f, 0x00, 0x0a, 0x20, 0x20, + 0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfc, + 0x00, 0x4c, 0x69, 0x6e, 0x75, 0x78, 0x20, 0x46, + 0x48, 0x44, 0x0a, 0x20, 0x20, 0x20, 0x00, 0x05, + }, +}; + +static int edid_load(struct drm_connector *connector, char *name, + char *connector_name) +{ + const struct firmware *fw; + struct platform_device *pdev; + u8 *fwdata = NULL, *edid; + int fwsize, expected; + int builtin = 0, err = 0; + int i, valid_extensions = 0; + + pdev = platform_device_register_simple(connector_name, -1, NULL, 0); + if (IS_ERR(pdev)) { + DRM_ERROR("Failed to register EDID firmware platform device " + "for connector \"%s\"\n", connector_name); + err = -EINVAL; + goto out; + } + + err = request_firmware(&fw, name, &pdev->dev); + platform_device_unregister(pdev); + + if (err) { + i = 0; + while (i < GENERIC_EDIDS && strcmp(name, generic_edid_name[i])) + i++; + if (i < GENERIC_EDIDS) { + err = 0; + builtin = 1; + fwdata = generic_edid[i]; + fwsize = sizeof(generic_edid[i]); + } + } + + if (err) { + DRM_ERROR("Requesting EDID firmware \"%s\" failed (err=%d)\n", + name, err); + goto out; + } + + if (fwdata == NULL) { + fwdata = (u8 *) fw->data; + fwsize = fw->size; + } + + expected = (fwdata[0x7e] + 1) * EDID_LENGTH; + if (expected != fwsize) { + DRM_ERROR("Size of EDID firmware \"%s\" is invalid " + "(expected %d, got %d)\n", name, expected, (int) fwsize); + err = -EINVAL; + goto relfw_out; + } + + edid = kmalloc(fwsize, GFP_KERNEL); + if (edid == NULL) { + err = -ENOMEM; + goto relfw_out; + } + memcpy(edid, fwdata, fwsize); + + if (!drm_edid_block_valid(edid)) { + DRM_ERROR("Base block of EDID firmware \"%s\" is invalid ", + name); + kfree(edid); + err = -EINVAL; + goto relfw_out; + } + + for (i = 1; i <= edid[0x7e]; i++) { + if (i != valid_extensions + 1) + memcpy(edid + (valid_extensions + 1) * EDID_LENGTH, + edid + i * EDID_LENGTH, EDID_LENGTH); + if (drm_edid_block_valid(edid + i * EDID_LENGTH)) + valid_extensions++; + } + + if (valid_extensions != edid[0x7e]) { + edid[EDID_LENGTH-1] += edid[0x7e] - valid_extensions; + DRM_INFO("Found %d valid extensions instead of %d in EDID data " + "\"%s\" for connector \"%s\"\n", valid_extensions, + edid[0x7e], name, connector_name); + edid[0x7e] = valid_extensions; + edid = krealloc(edid, (valid_extensions + 1) * EDID_LENGTH, + GFP_KERNEL); + if (edid == NULL) { + err = -ENOMEM; + goto relfw_out; + } + } + + connector->display_info.raw_edid = edid; + DRM_INFO("Got %s EDID base block and %d extension%s from " + "\"%s\" for connector \"%s\"\n", builtin ? "built-in" : + "external", valid_extensions, valid_extensions == 1 ? "" : "s", + name, connector_name); + +relfw_out: + release_firmware(fw); + +out: + return err; +} + +int drm_load_edid_firmware(struct drm_connector *connector) +{ + char *connector_name = drm_get_connector_name(connector); + char *edidname = edid_firmware, *last, *colon; + int ret = 0; + + if (*edidname == '\0') + return ret; + + colon = strchr(edidname, ':'); + if (colon != NULL) { + if (strncmp(connector_name, edidname, colon - edidname)) + return ret; + edidname = colon + 1; + if (*edidname == '\0') + return ret; + } + + last = edidname + strlen(edidname) - 1; + if (*last == '\n') + *last = '\0'; + + ret = edid_load(connector, edidname, connector_name); + if (ret) + return 0; + + drm_mode_connector_update_edid_property(connector, + (struct edid *) connector->display_info.raw_edid); + + return drm_add_edid_modes(connector, (struct edid *) + connector->display_info.raw_edid); +} diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 3401761d6391..e250eda4e3a8 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -1012,6 +1012,7 @@ extern int drm_add_modes_noedid(struct drm_connector *connector, int hdisplay, int vdisplay); extern int drm_edid_header_is_valid(const u8 *raw_edid); +extern bool drm_edid_block_valid(u8 *raw_edid); extern bool drm_edid_is_valid(struct edid *edid); struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev, int hsize, int vsize, int fresh); diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h index 74ce91684629..bcb9a66baa8c 100644 --- a/include/drm/drm_edid.h +++ b/include/drm/drm_edid.h @@ -238,5 +238,6 @@ int drm_av_sync_delay(struct drm_connector *connector, struct drm_display_mode *mode); struct drm_connector *drm_select_eld(struct drm_encoder *encoder, struct drm_display_mode *mode); +int drm_load_edid_firmware(struct drm_connector *connector); #endif /* __DRM_EDID_H__ */ |