summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt65
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-etraxfs.txt21
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-xlp.txt47
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-zynq.txt2
-rw-r--r--Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt39
-rw-r--r--Documentation/gpio/consumer.txt28
-rw-r--r--Documentation/gpio/gpio-legacy.txt9
-rw-r--r--Documentation/gpio/sysfs.txt8
-rw-r--r--Documentation/zh_CN/gpio.txt8
-rw-r--r--MAINTAINERS7
-rw-r--r--drivers/gpio/Kconfig39
-rw-r--r--drivers/gpio/Makefile4
-rw-r--r--drivers/gpio/gpio-altera.c3
-rw-r--r--drivers/gpio/gpio-bcm-kona.c26
-rw-r--r--drivers/gpio/gpio-brcmstb.c252
-rw-r--r--drivers/gpio/gpio-crystalcove.c5
-rw-r--r--drivers/gpio/gpio-dln2.c1
-rw-r--r--drivers/gpio/gpio-etraxfs.c176
-rw-r--r--drivers/gpio/gpio-f7188x.c4
-rw-r--r--drivers/gpio/gpio-generic.c22
-rw-r--r--drivers/gpio/gpio-it8761e.c2
-rw-r--r--drivers/gpio/gpio-lpc18xx.c180
-rw-r--r--drivers/gpio/gpio-lynxpoint.c2
-rw-r--r--drivers/gpio/gpio-max732x.c21
-rw-r--r--drivers/gpio/gpio-moxart.c17
-rw-r--r--drivers/gpio/gpio-mxc.c5
-rw-r--r--drivers/gpio/gpio-mxs.c2
-rw-r--r--drivers/gpio/gpio-omap.c83
-rw-r--r--drivers/gpio/gpio-pca953x.c23
-rw-r--r--drivers/gpio/gpio-pcf857x.c56
-rw-r--r--drivers/gpio/gpio-rcar.c13
-rw-r--r--drivers/gpio/gpio-stp-xway.c29
-rw-r--r--drivers/gpio/gpio-tb10x.c1
-rw-r--r--drivers/gpio/gpio-tegra.c2
-rw-r--r--drivers/gpio/gpio-ts5500.c2
-rw-r--r--drivers/gpio/gpio-xgene-sb.c22
-rw-r--r--drivers/gpio/gpio-xilinx.c4
-rw-r--r--drivers/gpio/gpio-xlp.c427
-rw-r--r--drivers/gpio/gpio-zynq.c193
-rw-r--r--drivers/gpio/gpiolib-acpi.c40
-rw-r--r--drivers/gpio/gpiolib-of.c2
-rw-r--r--drivers/gpio/gpiolib-sysfs.c567
-rw-r--r--drivers/gpio/gpiolib.c112
-rw-r--r--drivers/gpio/gpiolib.h16
-rw-r--r--drivers/i2c/i2c-core.c12
-rw-r--r--drivers/net/phy/mdio-mux-gpio.c3
-rw-r--r--drivers/tty/serial/serial_mctrl_gpio.c2
-rw-r--r--include/asm-generic/gpio.h5
-rw-r--r--include/linux/acpi.h7
-rw-r--r--include/linux/basic_mmio_gpio.h1
-rw-r--r--include/linux/gpio.h7
-rw-r--r--include/linux/gpio/consumer.h43
-rw-r--r--include/linux/gpio/driver.h13
-rw-r--r--include/linux/platform_data/gpio-omap.h12
54 files changed, 2047 insertions, 645 deletions
diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
new file mode 100644
index 000000000000..435f1bcca341
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
@@ -0,0 +1,65 @@
+Broadcom STB "UPG GIO" GPIO controller
+
+The controller's registers are organized as sets of eight 32-bit
+registers with each set controlling a bank of up to 32 pins. A single
+interrupt is shared for all of the banks handled by the controller.
+
+Required properties:
+
+- compatible:
+ Must be "brcm,brcmstb-gpio"
+
+- reg:
+ Define the base and range of the I/O address space containing
+ the brcmstb GPIO controller registers
+
+- #gpio-cells:
+ Should be <2>. The first cell is the pin number (within the controller's
+ pin space), and the second is used for the following:
+ bit[0]: polarity (0 for active-high, 1 for active-low)
+
+- gpio-controller:
+ Specifies that the node is a GPIO controller.
+
+- brcm,gpio-bank-widths:
+ Number of GPIO lines for each bank. Number of elements must
+ correspond to number of banks suggested by the 'reg' property.
+
+Optional properties:
+
+- interrupts:
+ The interrupt shared by all GPIO lines for this controller.
+
+- interrupt-parent:
+ phandle of the parent interrupt controller
+
+- #interrupt-cells:
+ Should be <2>. The first cell is the GPIO number, the second should specify
+ flags. The following subset of flags is supported:
+ - bits[3:0] trigger type and level flags
+ 1 = low-to-high edge triggered
+ 2 = high-to-low edge triggered
+ 4 = active high level-sensitive
+ 8 = active low level-sensitive
+ Valid combinations are 1, 2, 3, 4, 8.
+ See also Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+- interrupt-controller:
+ Marks the device node as an interrupt controller
+
+- interrupt-names:
+ The name of the IRQ resource used by this controller
+
+Example:
+ upg_gio: gpio@f040a700 {
+ #gpio-cells = <0x2>;
+ #interrupt-cells = <0x2>;
+ compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+ gpio-controller;
+ interrupt-controller;
+ reg = <0xf040a700 0x80>;
+ interrupt-parent = <0xf>;
+ interrupts = <0x6>;
+ interrupt-names = "upg_gio";
+ brcm,gpio-bank-widths = <0x20 0x20 0x20 0x18>;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-etraxfs.txt b/Documentation/devicetree/bindings/gpio/gpio-etraxfs.txt
new file mode 100644
index 000000000000..abf4db736c6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-etraxfs.txt
@@ -0,0 +1,21 @@
+Axis ETRAX FS General I/O controller bindings
+
+Required properties:
+
+- compatible:
+ - "axis,etraxfs-gio"
+- reg: Physical base address and length of the controller's registers.
+- #gpio-cells: Should be 3
+ - The first cell is the gpio offset number.
+ - The second cell is reserved and is currently unused.
+ - The third cell is the port number (hex).
+- gpio-controller: Marks the device node as a GPIO controller.
+
+Example:
+
+ gio: gpio@b001a000 {
+ compatible = "axis,etraxfs-gio";
+ reg = <0xb001a000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <3>;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xlp.txt b/Documentation/devicetree/bindings/gpio/gpio-xlp.txt
new file mode 100644
index 000000000000..262ee4ddf2cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-xlp.txt
@@ -0,0 +1,47 @@
+Netlogic XLP Family GPIO
+========================
+
+This GPIO driver is used for following Netlogic XLP SoCs:
+ XLP832, XLP316, XLP208, XLP980, XLP532
+
+Required properties:
+-------------------
+
+- compatible: Should be one of the following:
+ - "netlogic,xlp832-gpio": For Netlogic XLP832
+ - "netlogic,xlp316-gpio": For Netlogic XLP316
+ - "netlogic,xlp208-gpio": For Netlogic XLP208
+ - "netlogic,xlp980-gpio": For Netlogic XLP980
+ - "netlogic,xlp532-gpio": For Netlogic XLP532
+- reg: Physical base address and length of the controller's registers.
+- #gpio-cells: Should be two. The first cell is the pin number and the second
+ cell is used to specify optional parameters (currently unused).
+- gpio-controller: Marks the device node as a GPIO controller.
+- nr-gpios: Number of GPIO pins supported by the controller.
+- interrupt-cells: Should be two. The first cell is the GPIO Number. The
+ second cell is used to specify flags. The following subset of flags is
+ supported:
+ - trigger type:
+ 1 = low to high edge triggered.
+ 2 = high to low edge triggered.
+ 4 = active high level-sensitive.
+ 8 = active low level-sensitive.
+- interrupts: Interrupt number for this device.
+- interrupt-parent: phandle of the parent interrupt controller.
+- interrupt-controller: Identifies the node as an interrupt controller.
+
+Example:
+
+ gpio: xlp_gpio@34000 {
+ compatible = "netlogic,xlp316-gpio";
+ reg = <0 0x34100 0x1000
+ 0 0x35100 0x1000>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ nr-gpios = <57>;
+
+ #interrupt-cells = <2>;
+ interrupt-parent = <&pic>;
+ interrupts = <39>;
+ interrupt-controller;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.txt b/Documentation/devicetree/bindings/gpio/gpio-zynq.txt
index 986371a4be2c..db4c6a663c03 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-zynq.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.txt
@@ -6,7 +6,7 @@ Required properties:
- First cell is the GPIO line number
- Second cell is used to specify optional
parameters (unused)
-- compatible : Should be "xlnx,zynq-gpio-1.0"
+- compatible : Should be "xlnx,zynq-gpio-1.0" or "xlnx,zynqmp-gpio-1.0"
- clocks : Clock specifier (see clock bindings for details)
- gpio-controller : Marks the device node as a GPIO controller.
- interrupts : Interrupt specifier (see interrupt bindings for
diff --git a/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt
new file mode 100644
index 000000000000..eb7cdd69e10b
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt
@@ -0,0 +1,39 @@
+NXP LPC18xx/43xx GPIO controller Device Tree Bindings
+-----------------------------------------------------
+
+Required properties:
+- compatible : Should be "nxp,lpc1850-gpio"
+- reg : Address and length of the register set for the device
+- clocks : Clock specifier (see clock bindings for details)
+- gpio-controller : Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two
+ - First cell is the GPIO line number
+ - Second cell is used to specify polarity
+
+Optional properties:
+- gpio-ranges : Mapping between GPIO and pinctrl
+
+Example:
+#define LPC_GPIO(port, pin) (port * 32 + pin)
+#define LPC_PIN(port, pin) (0x##port * 32 + pin)
+
+gpio: gpio@400f4000 {
+ compatible = "nxp,lpc1850-gpio";
+ reg = <0x400f4000 0x4000>;
+ clocks = <&ccu1 CLK_CPU_GPIO>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl LPC_GPIO(0,0) LPC_PIN(0,0) 2>,
+ ...
+ <&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5) 7>;
+};
+
+gpio_joystick {
+ compatible = "gpio-keys-polled";
+ ...
+
+ button@0 {
+ ...
+ gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
+ };
+};
diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt
index c21c1313f09e..bbc8b5888b80 100644
--- a/Documentation/gpio/consumer.txt
+++ b/Documentation/gpio/consumer.txt
@@ -241,18 +241,18 @@ Set multiple GPIO outputs with a single function call
-----------------------------------------------------
The following functions set the output values of an array of GPIOs:
- void gpiod_set_array(unsigned int array_size,
- struct gpio_desc **desc_array,
- int *value_array)
- void gpiod_set_raw_array(unsigned int array_size,
- struct gpio_desc **desc_array,
- int *value_array)
- void gpiod_set_array_cansleep(unsigned int array_size,
- struct gpio_desc **desc_array,
- int *value_array)
- void gpiod_set_raw_array_cansleep(unsigned int array_size,
- struct gpio_desc **desc_array,
- int *value_array)
+ void gpiod_set_array_value(unsigned int array_size,
+ struct gpio_desc **desc_array,
+ int *value_array)
+ void gpiod_set_raw_array_value(unsigned int array_size,
+ struct gpio_desc **desc_array,
+ int *value_array)
+ void gpiod_set_array_value_cansleep(unsigned int array_size,
+ struct gpio_desc **desc_array,
+ int *value_array)
+ void gpiod_set_raw_array_value_cansleep(unsigned int array_size,
+ struct gpio_desc **desc_array,
+ int *value_array)
The array can be an arbitrary set of GPIOs. The functions will try to set
GPIOs belonging to the same bank or chip simultaneously if supported by the
@@ -271,8 +271,8 @@ matches the desired group of GPIOs, those GPIOs can be set by simply using
the struct gpio_descs returned by gpiod_get_array():
struct gpio_descs *my_gpio_descs = gpiod_get_array(...);
- gpiod_set_array(my_gpio_descs->ndescs, my_gpio_descs->desc,
- my_gpio_values);
+ gpiod_set_array_value(my_gpio_descs->ndescs, my_gpio_descs->desc,
+ my_gpio_values);
It is also possible to set a completely arbitrary array of descriptors. The
descriptors may be obtained using any combination of gpiod_get() and
diff --git a/Documentation/gpio/gpio-legacy.txt b/Documentation/gpio/gpio-legacy.txt
index 6f83fa965b4b..79ab5648d69b 100644
--- a/Documentation/gpio/gpio-legacy.txt
+++ b/Documentation/gpio/gpio-legacy.txt
@@ -751,9 +751,6 @@ requested using gpio_request():
int gpio_export_link(struct device *dev, const char *name,
unsigned gpio)
- /* change the polarity of a GPIO node in sysfs */
- int gpio_sysfs_set_active_low(unsigned gpio, int value);
-
After a kernel driver requests a GPIO, it may only be made available in
the sysfs interface by gpio_export(). The driver can control whether the
signal direction may change. This helps drivers prevent userspace code
@@ -767,9 +764,3 @@ After the GPIO has been exported, gpio_export_link() allows creating
symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can
use this to provide the interface under their own device in sysfs with
a descriptive name.
-
-Drivers can use gpio_sysfs_set_active_low() to hide GPIO line polarity
-differences between boards from user space. This only affects the
-sysfs interface. Polarity change can be done both before and after
-gpio_export(), and previously enabled poll(2) support for either
-rising or falling edge will be reconfigured to follow this setting.
diff --git a/Documentation/gpio/sysfs.txt b/Documentation/gpio/sysfs.txt
index c2c3a97f8ff7..535b6a8a7a7c 100644
--- a/Documentation/gpio/sysfs.txt
+++ b/Documentation/gpio/sysfs.txt
@@ -132,9 +132,6 @@ requested using gpio_request():
int gpiod_export_link(struct device *dev, const char *name,
struct gpio_desc *desc);
- /* change the polarity of a GPIO node in sysfs */
- int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value);
-
After a kernel driver requests a GPIO, it may only be made available in
the sysfs interface by gpiod_export(). The driver can control whether the
signal direction may change. This helps drivers prevent userspace code
@@ -148,8 +145,3 @@ After the GPIO has been exported, gpiod_export_link() allows creating
symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can
use this to provide the interface under their own device in sysfs with
a descriptive name.
-
-Drivers can use gpiod_sysfs_set_active_low() to hide GPIO line polarity
-differences between boards from user space. Polarity change can be done both
-before and after gpiod_export(), and previously enabled poll(2) support for
-either rising or falling edge will be reconfigured to follow this setting.
diff --git a/Documentation/zh_CN/gpio.txt b/Documentation/zh_CN/gpio.txt
index d5b8f01833f4..bce972521065 100644
--- a/Documentation/zh_CN/gpio.txt
+++ b/Documentation/zh_CN/gpio.txt
@@ -638,9 +638,6 @@ GPIO 控制器的路径类似 /sys/class/gpio/gpiochip42/ (对于从#42 GPIO
int gpio_export_link(struct device *dev, const char *name,
unsigned gpio)
- /* 改变 sysfs 中的一个 GPIO 节点的极性 */
- int gpio_sysfs_set_active_low(unsigned gpio, int value);
-
在一个内核驱动申请一个 GPIO 之后,它可以通过 gpio_export()使其在 sysfs
接口中可见。该驱动可以控制信号方向是否可修改。这有助于防止用户空间代码无意间
破坏重要的系统状态。
@@ -651,8 +648,3 @@ GPIO 控制器的路径类似 /sys/class/gpio/gpiochip42/ (对于从#42 GPIO
在 GPIO 被导出之后,gpio_export_link()允许在 sysfs 文件系统的任何地方
创建一个到这个 GPIO sysfs 节点的符号链接。这样驱动就可以通过一个描述性的
名字,在 sysfs 中他们所拥有的设备下提供一个(到这个 GPIO sysfs 节点的)接口。
-
-驱动可以使用 gpio_sysfs_set_active_low() 来在用户空间隐藏电路板之间
-GPIO 线的极性差异。这个仅对 sysfs 接口起作用。极性的改变可以在 gpio_export()
-前后进行,且之前使能的轮询操作(poll(2))支持(上升或下降沿)将会被重新配置来遵循
-这个设置。
diff --git a/MAINTAINERS b/MAINTAINERS
index 4f1e79b52cc5..8de3a7b0bf2d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2250,6 +2250,13 @@ N: bcm9583*
N: bcm583*
N: bcm113*
+BROADCOM BRCMSTB GPIO DRIVER
+M: Gregory Fong <gregory.0xf0@gmail.com>
+L: bcm-kernel-feedback-list@broadcom.com>
+S: Supported
+F: drivers/gpio/gpio-brcmstb.c
+F: Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
+
BROADCOM KONA GPIO DRIVER
M: Ray Jui <rjui@broadcom.com>
L: bcm-kernel-feedback-list@broadcom.com
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index caefe806db5e..8f1fe739c985 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -126,6 +126,14 @@ config GPIO_BCM_KONA
help
Turn on GPIO support for Broadcom "Kona" chips.
+config GPIO_BRCMSTB
+ tristate "BRCMSTB GPIO support"
+ default y if ARCH_BRCMSTB
+ depends on OF_GPIO && (ARCH_BRCMSTB || COMPILE_TEST)
+ select GPIO_GENERIC
+ help
+ Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs.
+
config GPIO_CLPS711X
tristate "CLPS711X GPIO support"
depends on ARCH_CLPS711X || COMPILE_TEST
@@ -159,6 +167,14 @@ config GPIO_EP93XX
depends on ARCH_EP93XX
select GPIO_GENERIC
+config GPIO_ETRAXFS
+ bool "Axis ETRAX FS General I/O"
+ depends on CRIS || COMPILE_TEST
+ depends on OF
+ select GPIO_GENERIC
+ help
+ Say yes here to support the GPIO controller on Axis ETRAX FS SoCs.
+
config GPIO_F7188X
tristate "F71869, F71869A, F71882FG and F71889F GPIO support"
depends on X86
@@ -230,6 +246,14 @@ config GPIO_LOONGSON
help
driver for GPIO functionality on Loongson-2F/3A/3B processors.
+config GPIO_LPC18XX
+ bool "NXP LPC18XX/43XX GPIO support"
+ default y if ARCH_LPC18XX
+ depends on OF_GPIO && (ARCH_LPC18XX || COMPILE_TEST)
+ help
+ Select this option to enable GPIO driver for
+ NXP LPC18XX/43XX devices.
+
config GPIO_LYNXPOINT
tristate "Intel Lynxpoint GPIO support"
depends on ACPI && X86
@@ -308,7 +332,7 @@ config GPIO_OCTEON
family of SOCs.
config GPIO_OMAP
- bool "TI OMAP GPIO support" if COMPILE_TEST && !ARCH_OMAP2PLUS
+ tristate "TI OMAP GPIO support" if ARCH_OMAP2PLUS || COMPILE_TEST
default y if ARCH_OMAP
depends on ARM
select GENERIC_IRQ_CHIP
@@ -488,6 +512,17 @@ config GPIO_XILINX
help
Say yes here to support the Xilinx FPGA GPIO device
+config GPIO_XLP
+ tristate "Netlogic XLP GPIO support"
+ depends on CPU_XLP
+ select GPIOLIB_IRQCHIP
+ help
+ This driver provides support for GPIO interface on Netlogic XLP MIPS64
+ SoCs. Currently supported XLP variants are XLP8XX, XLP3XX, XLP2XX,
+ XLP9XX and XLP5XX.
+
+ If unsure, say N.
+
config GPIO_XTENSA
bool "Xtensa GPIO32 support"
depends on XTENSA
@@ -505,7 +540,7 @@ config GPIO_ZEVIO
config GPIO_ZYNQ
tristate "Xilinx Zynq GPIO support"
- depends on ARCH_ZYNQ
+ depends on ARCH_ZYNQ || ARCH_ZYNQMP
select GPIOLIB_IRQCHIP
help
Say yes here to support Xilinx Zynq GPIO controller.
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index f71bb971329c..f82cd678ce08 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_GPIO_ALTERA) += gpio-altera.o
obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o
+obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
@@ -32,6 +33,7 @@ obj-$(CONFIG_GPIO_DLN2) += gpio-dln2.o
obj-$(CONFIG_GPIO_DWAPB) += gpio-dwapb.o
obj-$(CONFIG_GPIO_EM) += gpio-em.o
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
+obj-$(CONFIG_GPIO_ETRAXFS) += gpio-etraxfs.o
obj-$(CONFIG_GPIO_F7188X) += gpio-f7188x.o
obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o
obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o
@@ -44,6 +46,7 @@ obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o
obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o
obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o
obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
+obj-$(CONFIG_GPIO_LPC18XX) += gpio-lpc18xx.o
obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o
obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o
@@ -109,6 +112,7 @@ obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o
obj-$(CONFIG_GPIO_XGENE) += gpio-xgene.o
obj-$(CONFIG_GPIO_XGENE_SB) += gpio-xgene-sb.o
obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx.o
+obj-$(CONFIG_GPIO_XLP) += gpio-xlp.o
obj-$(CONFIG_GPIO_XTENSA) += gpio-xtensa.o
obj-$(CONFIG_GPIO_ZEVIO) += gpio-zevio.o
obj-$(CONFIG_GPIO_ZYNQ) += gpio-zynq.o
diff --git a/drivers/gpio/gpio-altera.c b/drivers/gpio/gpio-altera.c
index 449fb46cb8a0..0f3d336d6303 100644
--- a/drivers/gpio/gpio-altera.c
+++ b/drivers/gpio/gpio-altera.c
@@ -107,7 +107,8 @@ static int altera_gpio_irq_set_type(struct irq_data *d,
return -EINVAL;
}
-static unsigned int altera_gpio_irq_startup(struct irq_data *d) {
+static unsigned int altera_gpio_irq_startup(struct irq_data *d)
+{
altera_gpio_irq_unmask(d);
return 0;
diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
index b164ce837b43..a6e79225886d 100644
--- a/drivers/gpio/gpio-bcm-kona.c
+++ b/drivers/gpio/gpio-bcm-kona.c
@@ -122,6 +122,16 @@ static void bcm_kona_gpio_unlock_gpio(struct bcm_kona_gpio *kona_gpio,
spin_unlock_irqrestore(&kona_gpio->lock, flags);
}
+static int bcm_kona_gpio_get_dir(struct gpio_chip *chip, unsigned gpio)
+{
+ struct bcm_kona_gpio *kona_gpio = to_kona_gpio(chip);
+ void __iomem *reg_base = kona_gpio->reg_base;
+ u32 val;
+
+ val = readl(reg_base + GPIO_CONTROL(gpio)) & GPIO_GPCTR0_IOTR_MASK;
+ return val ? GPIOF_DIR_IN : GPIOF_DIR_OUT;
+}
+
static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
{
struct bcm_kona_gpio *kona_gpio;
@@ -135,12 +145,8 @@ static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
reg_base = kona_gpio->reg_base;
spin_lock_irqsave(&kona_gpio->lock, flags);
- /* determine the GPIO pin direction */
- val = readl(reg_base + GPIO_CONTROL(gpio));
- val &= GPIO_GPCTR0_IOTR_MASK;
-
/* this function only applies to output pin */
- if (GPIO_GPCTR0_IOTR_CMD_INPUT == val)
+ if (bcm_kona_gpio_get_dir(chip, gpio) == GPIOF_DIR_IN)
goto out;
reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
@@ -166,13 +172,12 @@ static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio)
reg_base = kona_gpio->reg_base;
spin_lock_irqsave(&kona_gpio->lock, flags);
- /* determine the GPIO pin direction */
- val = readl(reg_base + GPIO_CONTROL(gpio));
- val &= GPIO_GPCTR0_IOTR_MASK;
+ if (bcm_kona_gpio_get_dir(chip, gpio) == GPIOF_DIR_IN)
+ reg_offset = GPIO_IN_STATUS(bank_id);
+ else
+ reg_offset = GPIO_OUT_STATUS(bank_id);
/* read the GPIO bank status */
- reg_offset = (GPIO_GPCTR0_IOTR_CMD_INPUT == val) ?
- GPIO_IN_STATUS(bank_id) : GPIO_OUT_STATUS(bank_id);
val = readl(reg_base + reg_offset);
spin_unlock_irqrestore(&kona_gpio->lock, flags);
@@ -310,6 +315,7 @@ static struct gpio_chip template_chip = {
.owner = THIS_MODULE,
.request = bcm_kona_gpio_request,
.free = bcm_kona_gpio_free,
+ .get_direction = bcm_kona_gpio_get_dir,
.direction_input = bcm_kona_gpio_direction_input,
.get = bcm_kona_gpio_get,
.direction_output = bcm_kona_gpio_direction_output,
diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c
new file mode 100644
index 000000000000..7a3cb1fa0a76
--- /dev/null
+++ b/drivers/gpio/gpio-brcmstb.c
@@ -0,0 +1,252 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/module.h>
+#include <linux/basic_mmio_gpio.h>
+
+#define GIO_BANK_SIZE 0x20
+#define GIO_ODEN(bank) (((bank) * GIO_BANK_SIZE) + 0x00)
+#define GIO_DATA(bank) (((bank) * GIO_BANK_SIZE) + 0x04)
+#define GIO_IODIR(bank) (((bank) * GIO_BANK_SIZE) + 0x08)
+#define GIO_EC(bank) (((bank) * GIO_BANK_SIZE) + 0x0c)
+#define GIO_EI(bank) (((bank) * GIO_BANK_SIZE) + 0x10)
+#define GIO_MASK(bank) (((bank) * GIO_BANK_SIZE) + 0x14)
+#define GIO_LEVEL(bank) (((bank) * GIO_BANK_SIZE) + 0x18)
+#define GIO_STAT(bank) (((bank) * GIO_BANK_SIZE) + 0x1c)
+
+struct brcmstb_gpio_bank {
+ struct list_head node;
+ int id;
+ struct bgpio_chip bgc;
+ struct brcmstb_gpio_priv *parent_priv;
+ u32 width;
+};
+
+struct brcmstb_gpio_priv {
+ struct list_head bank_list;
+ void __iomem *reg_base;
+ int num_banks;
+ struct platform_device *pdev;
+ int gpio_base;
+};
+
+#define MAX_GPIO_PER_BANK 32
+#define GPIO_BANK(gpio) ((gpio) >> 5)
+/* assumes MAX_GPIO_PER_BANK is a multiple of 2 */
+#define GPIO_BIT(gpio) ((gpio) & (MAX_GPIO_PER_BANK - 1))
+
+static inline struct brcmstb_gpio_bank *
+brcmstb_gpio_gc_to_bank(struct gpio_chip *gc)
+{
+ struct bgpio_chip *bgc = to_bgpio_chip(gc);
+ return container_of(bgc, struct brcmstb_gpio_bank, bgc);
+}
+
+static inline struct brcmstb_gpio_priv *
+brcmstb_gpio_gc_to_priv(struct gpio_chip *gc)
+{
+ struct brcmstb_gpio_bank *bank = brcmstb_gpio_gc_to_bank(gc);
+ return bank->parent_priv;
+}
+
+/* Make sure that the number of banks matches up between properties */
+static int brcmstb_gpio_sanity_check_banks(struct device *dev,
+ struct device_node *np, struct resource *res)
+{
+ int res_num_banks = resource_size(res) / GIO_BANK_SIZE;
+ int num_banks =
+ of_property_count_u32_elems(np, "brcm,gpio-bank-widths");
+
+ if (res_num_banks != num_banks) {
+ dev_err(dev, "Mismatch in banks: res had %d, bank-widths had %d\n",
+ res_num_banks, num_banks);
+ return -EINVAL;
+ } else {
+ return 0;
+ }
+}
+
+static int brcmstb_gpio_remove(struct platform_device *pdev)
+{
+ struct brcmstb_gpio_priv *priv = platform_get_drvdata(pdev);
+ struct list_head *pos;
+ struct brcmstb_gpio_bank *bank;
+ int ret = 0;
+
+ list_for_each(pos, &priv->bank_list) {
+ bank = list_entry(pos, struct brcmstb_gpio_bank, node);
+ ret = bgpio_remove(&bank->bgc);
+ if (ret)
+ dev_err(&pdev->dev, "gpiochip_remove fail in cleanup");
+ }
+ return ret;
+}
+
+static int brcmstb_gpio_of_xlate(struct gpio_chip *gc,
+ const struct of_phandle_args *gpiospec, u32 *flags)
+{
+ struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc);
+ struct brcmstb_gpio_bank *bank = brcmstb_gpio_gc_to_bank(gc);
+ int offset;
+
+ if (gc->of_gpio_n_cells != 2) {
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
+ return -EINVAL;
+
+ offset = gpiospec->args[0] - (gc->base - priv->gpio_base);
+ if (offset >= gc->ngpio)
+ return -EINVAL;
+
+ if (unlikely(offset >= bank->width)) {
+ dev_warn_ratelimited(&priv->pdev->dev,
+ "Received request for invalid GPIO offset %d\n",
+ gpiospec->args[0]);
+ }
+
+ if (flags)
+ *flags = gpiospec->args[1];
+
+ return offset;
+}
+
+static int brcmstb_gpio_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ void __iomem *reg_base;
+ struct brcmstb_gpio_priv *priv;
+ struct resource *res;
+ struct property *prop;
+ const __be32 *p;
+ u32 bank_width;
+ int err;
+ static int gpio_base;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ reg_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(reg_base))
+ return PTR_ERR(reg_base);
+
+ priv->gpio_base = gpio_base;
+ priv->reg_base = reg_base;
+ priv->pdev = pdev;
+
+ INIT_LIST_HEAD(&priv->bank_list);
+ if (brcmstb_gpio_sanity_check_banks(dev, np, res))
+ return -EINVAL;
+
+ of_property_for_each_u32(np, "brcm,gpio-bank-widths", prop, p,
+ bank_width) {
+ struct brcmstb_gpio_bank *bank;
+ struct bgpio_chip *bgc;
+ struct gpio_chip *gc;
+
+ bank = devm_kzalloc(dev, sizeof(*bank), GFP_KERNEL);
+ if (!bank) {
+ err = -ENOMEM;
+ goto fail;
+ }
+
+ bank->parent_priv = priv;
+ bank->id = priv->num_banks;
+ if (bank_width <= 0 || bank_width > MAX_GPIO_PER_BANK) {
+ dev_err(dev, "Invalid bank width %d\n", bank_width);
+ goto fail;
+ } else {
+ bank->width = bank_width;
+ }
+
+ /*
+ * Regs are 4 bytes wide, have data reg, no set/clear regs,
+ * and direction bits have 0 = output and 1 = input
+ */
+ bgc = &bank->bgc;
+ err = bgpio_init(bgc, dev, 4,
+ reg_base + GIO_DATA(bank->id),
+ NULL, NULL, NULL,
+ reg_base + GIO_IODIR(bank->id), 0);
+ if (err) {
+ dev_err(dev, "bgpio_init() failed\n");
+ goto fail;
+ }
+
+ gc = &bgc->gc;
+ gc->of_node = np;
+ gc->owner = THIS_MODULE;
+ gc->label = np->full_name;
+ gc->base = gpio_base;
+ gc->of_gpio_n_cells = 2;
+ gc->of_xlate = brcmstb_gpio_of_xlate;
+ /* not all ngpio lines are valid, will use bank width later */
+ gc->ngpio = MAX_GPIO_PER_BANK;
+
+ err = gpiochip_add(gc);
+ if (err) {
+ dev_err(dev, "Could not add gpiochip for bank %d\n",
+ bank->id);
+ goto fail;
+ }
+ gpio_base += gc->ngpio;
+ dev_dbg(dev, "bank=%d, base=%d, ngpio=%d, width=%d\n", bank->id,
+ gc->base, gc->ngpio, bank->width);
+
+ /* Everything looks good, so add bank to list */
+ list_add(&bank->node, &priv->bank_list);
+
+ priv->num_banks++;
+ }
+
+ dev_info(dev, "Registered %d banks (GPIO(s): %d-%d)\n",
+ priv->num_banks, priv->gpio_base, gpio_base - 1);
+
+ platform_set_drvdata(pdev, priv);
+
+ return 0;
+
+fail:
+ (void) brcmstb_gpio_remove(pdev);
+ return err;
+}
+
+static const struct of_device_id brcmstb_gpio_of_match[] = {
+ { .compatible = "brcm,brcmstb-gpio" },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, brcmstb_gpio_of_match);
+
+static struct platform_driver brcmstb_gpio_driver = {
+ .driver = {
+ .name = "brcmstb-gpio",
+ .of_match_table = brcmstb_gpio_of_match,
+ },
+ .probe = brcmstb_gpio_probe,
+ .remove = brcmstb_gpio_remove,
+};
+module_platform_driver(brcmstb_gpio_driver);
+
+MODULE_AUTHOR("Gregory Fong");
+MODULE_DESCRIPTION("Driver for Broadcom BRCMSTB SoC UPG GPIO");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-crystalcove.c b/drivers/gpio/gpio-crystalcove.c
index 91a7ffe83135..fddd204dc9b6 100644
--- a/drivers/gpio/gpio-crystalcove.c
+++ b/drivers/gpio/gpio-crystalcove.c
@@ -16,6 +16,7 @@
*/
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/seq_file.h>
@@ -94,9 +95,8 @@ static inline int to_reg(int gpio, enum ctrl_register reg_type)
{
int reg;
- if (gpio == 94) {
+ if (gpio == 94)
return GPIOPANELCTL;
- }
if (reg_type == CTRL_IN) {
if (gpio < 8)
@@ -255,6 +255,7 @@ static struct irq_chip crystalcove_irqchip = {
.irq_set_type = crystalcove_irq_type,
.irq_bus_lock = crystalcove_bus_lock,
.irq_bus_sync_unlock = crystalcove_bus_sync_unlock,
+ .flags = IRQCHIP_SKIP_SET_WAKE,
};
static irqreturn_t crystalcove_gpio_irq_handler(int irq, void *data)
diff --git a/drivers/gpio/gpio-dln2.c b/drivers/gpio/gpio-dln2.c
index dbdb4de82c6d..6685712c15cf 100644
--- a/drivers/gpio/gpio-dln2.c
+++ b/drivers/gpio/gpio-dln2.c
@@ -466,7 +466,6 @@ static int dln2_gpio_probe(struct platform_device *pdev)
dln2->gpio.owner = THIS_MODULE;
dln2->gpio.base = -1;
dln2->gpio.ngpio = pins;
- dln2->gpio.exported = true;
dln2->gpio.can_sleep = true;
dln2->gpio.irq_not_threaded = true;
dln2->gpio.set = dln2_gpio_set;
diff --git a/drivers/gpio/gpio-etraxfs.c b/drivers/gpio/gpio-etraxfs.c
new file mode 100644
index 000000000000..28071f4a5672
--- /dev/null
+++ b/drivers/gpio/gpio-etraxfs.c
@@ -0,0 +1,176 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/basic_mmio_gpio.h>
+
+#define ETRAX_FS_rw_pa_dout 0
+#define ETRAX_FS_r_pa_din 4
+#define ETRAX_FS_rw_pa_oe 8
+#define ETRAX_FS_rw_intr_cfg 12
+#define ETRAX_FS_rw_intr_mask 16
+#define ETRAX_FS_rw_ack_intr 20
+#define ETRAX_FS_r_intr 24
+#define ETRAX_FS_rw_pb_dout 32
+#define ETRAX_FS_r_pb_din 36
+#define ETRAX_FS_rw_pb_oe 40
+#define ETRAX_FS_rw_pc_dout 48
+#define ETRAX_FS_r_pc_din 52
+#define ETRAX_FS_rw_pc_oe 56
+#define ETRAX_FS_rw_pd_dout 64
+#define ETRAX_FS_r_pd_din 68
+#define ETRAX_FS_rw_pd_oe 72
+#define ETRAX_FS_rw_pe_dout 80
+#define ETRAX_FS_r_pe_din 84
+#define ETRAX_FS_rw_pe_oe 88
+
+struct etraxfs_gpio_port {
+ const char *label;
+ unsigned int oe;
+ unsigned int dout;
+ unsigned int din;
+ unsigned int ngpio;
+};
+
+struct etraxfs_gpio_info {
+ unsigned int num_ports;
+ const struct etraxfs_gpio_port *ports;
+};
+
+static const struct etraxfs_gpio_port etraxfs_gpio_etraxfs_ports[] = {
+ {
+ .label = "A",
+ .ngpio = 8,
+ .oe = ETRAX_FS_rw_pa_oe,
+ .dout = ETRAX_FS_rw_pa_dout,
+ .din = ETRAX_FS_r_pa_din,
+ },
+ {
+ .label = "B",
+ .ngpio = 18,
+ .oe = ETRAX_FS_rw_pb_oe,
+ .dout = ETRAX_FS_rw_pb_dout,
+ .din = ETRAX_FS_r_pb_din,
+ },
+ {
+ .label = "C",
+ .ngpio = 18,
+ .oe = ETRAX_FS_rw_pc_oe,
+ .dout = ETRAX_FS_rw_pc_dout,
+ .din = ETRAX_FS_r_pc_din,
+ },
+ {
+ .label = "D",
+ .ngpio = 18,
+ .oe = ETRAX_FS_rw_pd_oe,
+ .dout = ETRAX_FS_rw_pd_dout,
+ .din = ETRAX_FS_r_pd_din,
+ },
+ {
+ .label = "E",
+ .ngpio = 18,
+ .oe = ETRAX_FS_rw_pe_oe,
+ .dout = ETRAX_FS_rw_pe_dout,
+ .din = ETRAX_FS_r_pe_din,
+ },
+};
+
+static const struct etraxfs_gpio_info etraxfs_gpio_etraxfs = {
+ .num_ports = ARRAY_SIZE(etraxfs_gpio_etraxfs_ports),
+ .ports = etraxfs_gpio_etraxfs_ports,
+};
+
+static int etraxfs_gpio_of_xlate(struct gpio_chip *gc,
+ const struct of_phandle_args *gpiospec,
+ u32 *flags)
+{
+ /*
+ * Port numbers are A to E, and the properties are integers, so we
+ * specify them as 0xA - 0xE.
+ */
+ if (gc->label[0] - 'A' + 0xA != gpiospec->args[2])
+ return -EINVAL;
+
+ return of_gpio_simple_xlate(gc, gpiospec, flags);
+}
+
+static const struct of_device_id etraxfs_gpio_of_table[] = {
+ {
+ .compatible = "axis,etraxfs-gio",
+ .data = &etraxfs_gpio_etraxfs,
+ },
+ {},
+};
+
+static int etraxfs_gpio_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct etraxfs_gpio_info *info;
+ const struct of_device_id *match;
+ struct bgpio_chip *chips;
+ struct resource *res;
+ void __iomem *regs;
+ int ret;
+ int i;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ regs = devm_ioremap_resource(dev, res);
+ if (!regs)
+ return -ENOMEM;
+
+ match = of_match_node(etraxfs_gpio_of_table, dev->of_node);
+ if (!match)
+ return -EINVAL;
+
+ info = match->data;
+
+ chips = devm_kzalloc(dev, sizeof(*chips) * info->num_ports, GFP_KERNEL);
+ if (!chips)
+ return -ENOMEM;
+
+ for (i = 0; i < info->num_ports; i++) {
+ struct bgpio_chip *bgc = &chips[i];
+ const struct etraxfs_gpio_port *port = &info->ports[i];
+
+ ret = bgpio_init(bgc, dev, 4,
+ regs + port->din, /* dat */
+ regs + port->dout, /* set */
+ NULL, /* clr */
+ regs + port->oe, /* dirout */
+ NULL, /* dirin */
+ BGPIOF_UNREADABLE_REG_SET);
+ if (ret)
+ return ret;
+
+ bgc->gc.ngpio = port->ngpio;
+ bgc->gc.label = port->label;
+
+ bgc->gc.of_node = dev->of_node;
+ bgc->gc.of_gpio_n_cells = 3;
+ bgc->gc.of_xlate = etraxfs_gpio_of_xlate;
+
+ ret = gpiochip_add(&bgc->gc);
+ if (ret)
+ dev_err(dev, "Unable to register port %s\n",
+ bgc->gc.label);
+ }
+
+ return 0;
+}
+
+static struct platform_driver etraxfs_gpio_driver = {
+ .driver = {
+ .name = "etraxfs-gpio",
+ .of_match_table = of_match_ptr(etraxfs_gpio_of_table),
+ },
+ .probe = etraxfs_gpio_probe,
+};
+
+static int __init etraxfs_gpio_init(void)
+{
+ return platform_driver_register(&etraxfs_gpio_driver);
+}
+
+device_initcall(etraxfs_gpio_init);
diff --git a/drivers/gpio/gpio-f7188x.c b/drivers/gpio/gpio-f7188x.c
index dbda8433c4f7..5e3c4fa67d82 100644
--- a/drivers/gpio/gpio-f7188x.c
+++ b/drivers/gpio/gpio-f7188x.c
@@ -172,7 +172,7 @@ static struct f7188x_gpio_bank f71869a_gpio_bank[] = {
};
static struct f7188x_gpio_bank f71882_gpio_bank[] = {
- F7188X_GPIO_BANK(0 , 8, 0xF0),
+ F7188X_GPIO_BANK(0, 8, 0xF0),
F7188X_GPIO_BANK(10, 8, 0xE0),
F7188X_GPIO_BANK(20, 8, 0xD0),
F7188X_GPIO_BANK(30, 4, 0xC0),
@@ -180,7 +180,7 @@ static struct f7188x_gpio_bank f71882_gpio_bank[] = {
};
static struct f7188x_gpio_bank f71889_gpio_bank[] = {
- F7188X_GPIO_BANK(0 , 7, 0xF0),
+ F7188X_GPIO_BANK(0, 7, 0xF0),
F7188X_GPIO_BANK(10, 7, 0xE0),
F7188X_GPIO_BANK(20, 8, 0xD0),
F7188X_GPIO_BANK(30, 8, 0xC0),
diff --git a/drivers/gpio/gpio-generic.c b/drivers/gpio/gpio-generic.c
index b92a690f5765..9bda3727fac1 100644
--- a/drivers/gpio/gpio-generic.c
+++ b/drivers/gpio/gpio-generic.c
@@ -135,6 +135,17 @@ static unsigned long bgpio_pin2mask_be(struct bgpio_chip *bgc,
return 1 << (bgc->bits - 1 - pin);
}
+static int bgpio_get_set(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct bgpio_chip *bgc = to_bgpio_chip(gc);
+ unsigned long pinmask = bgc->pin2mask(bgc, gpio);
+
+ if (bgc->dir & pinmask)
+ return bgc->read_reg(bgc->reg_set) & pinmask;
+ else
+ return bgc->read_reg(bgc->reg_dat) & pinmask;
+}
+
static int bgpio_get(struct gpio_chip *gc, unsigned int gpio)
{
struct bgpio_chip *bgc = to_bgpio_chip(gc);
@@ -416,7 +427,8 @@ static int bgpio_setup_accessors(struct device *dev,
static int bgpio_setup_io(struct bgpio_chip *bgc,
void __iomem *dat,
void __iomem *set,
- void __iomem *clr)
+ void __iomem *clr,
+ unsigned long flags)
{
bgc->reg_dat = dat;
@@ -437,7 +449,11 @@ static int bgpio_setup_io(struct bgpio_chip *bgc,
bgc->gc.set_multiple = bgpio_set_multiple;
}
- bgc->gc.get = bgpio_get;
+ if (!(flags & BGPIOF_UNREADABLE_REG_SET) &&
+ (flags & BGPIOF_READ_OUTPUT_REG_SET))
+ bgc->gc.get = bgpio_get_set;
+ else
+ bgc->gc.get = bgpio_get;
return 0;
}
@@ -500,7 +516,7 @@ int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
bgc->gc.ngpio = bgc->bits;
bgc->gc.request = bgpio_request;
- ret = bgpio_setup_io(bgc, dat, set, clr);
+ ret = bgpio_setup_io(bgc, dat, set, clr, flags);
if (ret)
return ret;
diff --git a/drivers/gpio/gpio-it8761e.c b/drivers/gpio/gpio-it8761e.c
index dadfc245cf09..30a8f24c92c5 100644
--- a/drivers/gpio/gpio-it8761e.c
+++ b/drivers/gpio/gpio-it8761e.c
@@ -123,7 +123,7 @@ static void it8761e_gpio_set(struct gpio_chip *gc,
curr_vals = inb(reg);
if (val)
- outb(curr_vals | (1 << bit) , reg);
+ outb(curr_vals | (1 << bit), reg);
else
outb(curr_vals & ~(1 << bit), reg);
diff --git a/drivers/gpio/gpio-lpc18xx.c b/drivers/gpio/gpio-lpc18xx.c
new file mode 100644
index 000000000000..eb68603136b0
--- /dev/null
+++ b/drivers/gpio/gpio-lpc18xx.c
@@ -0,0 +1,180 @@
+/*
+ * GPIO driver for NXP LPC18xx/43xx.
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+
+/* LPC18xx GPIO register offsets */
+#define LPC18XX_REG_DIR(n) (0x2000 + n * sizeof(u32))
+
+#define LPC18XX_MAX_PORTS 8
+#define LPC18XX_PINS_PER_PORT 32
+
+struct lpc18xx_gpio_chip {
+ struct gpio_chip gpio;
+ void __iomem *base;
+ struct clk *clk;
+ spinlock_t lock;
+};
+
+static inline struct lpc18xx_gpio_chip *to_lpc18xx_gpio(struct gpio_chip *chip)
+{
+ return container_of(chip, struct lpc18xx_gpio_chip, gpio);
+}
+
+static int lpc18xx_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ return pinctrl_request_gpio(offset);
+}
+
+static void lpc18xx_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ pinctrl_free_gpio(offset);
+}
+
+static void lpc18xx_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct lpc18xx_gpio_chip *gc = to_lpc18xx_gpio(chip);
+ writeb(value ? 1 : 0, gc->base + offset);
+}
+
+static int lpc18xx_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct lpc18xx_gpio_chip *gc = to_lpc18xx_gpio(chip);
+ return !!readb(gc->base + offset);
+}
+
+static int lpc18xx_gpio_direction(struct gpio_chip *chip, unsigned offset,
+ bool out)
+{
+ struct lpc18xx_gpio_chip *gc = to_lpc18xx_gpio(chip);
+ unsigned long flags;
+ u32 port, pin, dir;
+
+ port = offset / LPC18XX_PINS_PER_PORT;
+ pin = offset % LPC18XX_PINS_PER_PORT;
+
+ spin_lock_irqsave(&gc->lock, flags);
+ dir = readl(gc->base + LPC18XX_REG_DIR(port));
+ if (out)
+ dir |= BIT(pin);
+ else
+ dir &= ~BIT(pin);
+ writel(dir, gc->base + LPC18XX_REG_DIR(port));
+ spin_unlock_irqrestore(&gc->lock, flags);
+
+ return 0;
+}
+
+static int lpc18xx_gpio_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ return lpc18xx_gpio_direction(chip, offset, false);
+}
+
+static int lpc18xx_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ lpc18xx_gpio_set(chip, offset, value);
+ return lpc18xx_gpio_direction(chip, offset, true);
+}
+
+static struct gpio_chip lpc18xx_chip = {
+ .label = "lpc18xx/43xx-gpio",
+ .request = lpc18xx_gpio_request,
+ .free = lpc18xx_gpio_free,
+ .direction_input = lpc18xx_gpio_direction_input,
+ .direction_output = lpc18xx_gpio_direction_output,
+ .set = lpc18xx_gpio_set,
+ .get = lpc18xx_gpio_get,
+ .ngpio = LPC18XX_MAX_PORTS * LPC18XX_PINS_PER_PORT,
+ .owner = THIS_MODULE,
+};
+
+static int lpc18xx_gpio_probe(struct platform_device *pdev)
+{
+ struct lpc18xx_gpio_chip *gc;
+ struct resource *res;
+ int ret;
+
+ gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
+ if (!gc)
+ return -ENOMEM;
+
+ gc->gpio = lpc18xx_chip;
+ platform_set_drvdata(pdev, gc);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ gc->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(gc->base))
+ return PTR_ERR(gc->base);
+
+ gc->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(gc->clk)) {
+ dev_err(&pdev->dev, "input clock not found\n");
+ return PTR_ERR(gc->clk);
+ }
+
+ ret = clk_prepare_enable(gc->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to enable clock\n");
+ return ret;
+ }
+
+ spin_lock_init(&gc->lock);
+
+ gc->gpio.dev = &pdev->dev;
+
+ ret = gpiochip_add(&gc->gpio);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add gpio chip\n");
+ clk_disable_unprepare(gc->clk);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int lpc18xx_gpio_remove(struct platform_device *pdev)
+{
+ struct lpc18xx_gpio_chip *gc = platform_get_drvdata(pdev);
+
+ gpiochip_remove(&gc->gpio);
+ clk_disable_unprepare(gc->clk);
+
+ return 0;
+}
+
+static const struct of_device_id lpc18xx_gpio_match[] = {
+ { .compatible = "nxp,lpc1850-gpio" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_gpio_match);
+
+static struct platform_driver lpc18xx_gpio_driver = {
+ .probe = lpc18xx_gpio_probe,
+ .remove = lpc18xx_gpio_remove,
+ .driver = {
+ .name = "lpc18xx-gpio",
+ .of_match_table = lpc18xx_gpio_match,
+ },
+};
+module_platform_driver(lpc18xx_gpio_driver);
+
+MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
+MODULE_DESCRIPTION("GPIO driver for LPC18xx/43xx");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-lynxpoint.c b/drivers/gpio/gpio-lynxpoint.c
index 127c755b38dc..153af464c7a7 100644
--- a/drivers/gpio/gpio-lynxpoint.c
+++ b/drivers/gpio/gpio-lynxpoint.c
@@ -72,7 +72,7 @@ struct lp_gpio {
*
* per gpio specific registers consist of two 32bit registers per gpio
* (LP_CONFIG1 and LP_CONFIG2), with 94 gpios there's a total of
- * 188 config registes.
+ * 188 config registers.
*
* A simplified view of the register layout look like this:
*
diff --git a/drivers/gpio/gpio-max732x.c b/drivers/gpio/gpio-max732x.c
index 0fa4543c5e02..aed4ca9338bc 100644
--- a/drivers/gpio/gpio-max732x.c
+++ b/drivers/gpio/gpio-max732x.c
@@ -429,6 +429,14 @@ static int max732x_irq_set_type(struct irq_data *d, unsigned int type)
return 0;
}
+static int max732x_irq_set_wake(struct irq_data *data, unsigned int on)
+{
+ struct max732x_chip *chip = irq_data_get_irq_chip_data(data);
+
+ irq_set_irq_wake(chip->client->irq, on);
+ return 0;
+}
+
static struct irq_chip max732x_irq_chip = {
.name = "max732x",
.irq_mask = max732x_irq_mask,
@@ -436,6 +444,7 @@ static struct irq_chip max732x_irq_chip = {
.irq_bus_lock = max732x_irq_bus_lock,
.irq_bus_sync_unlock = max732x_irq_bus_sync_unlock,
.irq_set_type = max732x_irq_set_type,
+ .irq_set_wake = max732x_irq_set_wake,
};
static uint8_t max732x_irq_pending(struct max732x_chip *chip)
@@ -507,12 +516,10 @@ static int max732x_irq_setup(struct max732x_chip *chip,
chip->irq_features = has_irq;
mutex_init(&chip->irq_lock);
- ret = devm_request_threaded_irq(&client->dev,
- client->irq,
- NULL,
- max732x_irq_handler,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
- dev_name(&client->dev), chip);
+ ret = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, max732x_irq_handler, IRQF_ONESHOT |
+ IRQF_TRIGGER_FALLING | IRQF_SHARED,
+ dev_name(&client->dev), chip);
if (ret) {
dev_err(&client->dev, "failed to request irq %d\n",
client->irq);
@@ -521,7 +528,7 @@ static int max732x_irq_setup(struct max732x_chip *chip,
ret = gpiochip_irqchip_add(&chip->gpio_chip,
&max732x_irq_chip,
irq_base,
- handle_edge_irq,
+ handle_simple_irq,
IRQ_TYPE_NONE);
if (ret) {
dev_err(&client->dev,
diff --git a/drivers/gpio/gpio-moxart.c b/drivers/gpio/gpio-moxart.c
index c3ab46e595da..abd8676ce2b6 100644
--- a/drivers/gpio/gpio-moxart.c
+++ b/drivers/gpio/gpio-moxart.c
@@ -39,17 +39,6 @@ static void moxart_gpio_free(struct gpio_chip *chip, unsigned offset)
pinctrl_free_gpio(offset);
}
-static int moxart_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- struct bgpio_chip *bgc = to_bgpio_chip(chip);
- u32 ret = bgc->read_reg(bgc->reg_dir);
-
- if (ret & BIT(offset))
- return !!(bgc->read_reg(bgc->reg_set) & BIT(offset));
- else
- return !!(bgc->read_reg(bgc->reg_dat) & BIT(offset));
-}
-
static int moxart_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -68,8 +57,9 @@ static int moxart_gpio_probe(struct platform_device *pdev)
return PTR_ERR(base);
ret = bgpio_init(bgc, dev, 4, base + GPIO_DATA_IN,
- base + GPIO_DATA_OUT, NULL,
- base + GPIO_PIN_DIRECTION, NULL, 0);
+ base + GPIO_DATA_OUT, NULL,
+ base + GPIO_PIN_DIRECTION, NULL,
+ BGPIOF_READ_OUTPUT_REG_SET);
if (ret) {
dev_err(&pdev->dev, "bgpio_init failed\n");
return ret;
@@ -78,7 +68,6 @@ static int moxart_gpio_probe(struct platform_device *pdev)
bgc->gc.label = "moxart-gpio";
bgc->gc.request = moxart_gpio_request;
bgc->gc.free = moxart_gpio_free;
- bgc->gc.get = moxart_gpio_get;
bgc->data = bgc->read_reg(bgc->reg_set);
bgc->gc.base = 0;
bgc->gc.ngpio = 32;
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index e4f42c95c320..ec1eb1b7250f 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -131,7 +131,7 @@ static struct mxc_gpio_hwdata *mxc_gpio_hwdata;
#define GPIO_INT_FALL_EDGE (mxc_gpio_hwdata->fall_edge)
#define GPIO_INT_BOTH_EDGES 0x4
-static struct platform_device_id mxc_gpio_devtype[] = {
+static const struct platform_device_id mxc_gpio_devtype[] = {
{
.name = "imx1-gpio",
.driver_data = IMX1_GPIO,
@@ -449,7 +449,8 @@ static int mxc_gpio_probe(struct platform_device *pdev)
err = bgpio_init(&port->bgc, &pdev->dev, 4,
port->base + GPIO_PSR,
port->base + GPIO_DR, NULL,
- port->base + GPIO_GDIR, NULL, 0);
+ port->base + GPIO_GDIR, NULL,
+ BGPIOF_READ_OUTPUT_REG_SET);
if (err)
goto out_bgio;
diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c
index eac872748ee7..551d15d7c369 100644
--- a/drivers/gpio/gpio-mxs.c
+++ b/drivers/gpio/gpio-mxs.c
@@ -239,7 +239,7 @@ static int mxs_gpio_get_direction(struct gpio_chip *gc, unsigned offset)
return !(dir & mask);
}
-static struct platform_device_id mxs_gpio_ids[] = {
+static const struct platform_device_id mxs_gpio_ids[] = {
{
.name = "imx23-gpio",
.driver_data = IMX23_GPIO,
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index b232397ad7ec..b0c57d505be7 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -488,9 +488,6 @@ static int omap_gpio_irq_type(struct irq_data *d, unsigned type)
unsigned long flags;
unsigned offset = d->hwirq;
- if (!BANK_USED(bank))
- pm_runtime_get_sync(bank->dev);
-
if (type & ~IRQ_TYPE_SENSE_MASK)
return -EINVAL;
@@ -498,12 +495,18 @@ static int omap_gpio_irq_type(struct irq_data *d, unsigned type)
(type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
return -EINVAL;
+ if (!BANK_USED(bank))
+ pm_runtime_get_sync(bank->dev);
+
spin_lock_irqsave(&bank->lock, flags);
retval = omap_set_gpio_triggering(bank, offset, type);
+ if (retval)
+ goto error;
omap_gpio_init_irq(bank, offset);
if (!omap_gpio_is_input(bank, offset)) {
spin_unlock_irqrestore(&bank->lock, flags);
- return -EINVAL;
+ retval = -EINVAL;
+ goto error;
}
spin_unlock_irqrestore(&bank->lock, flags);
@@ -512,6 +515,11 @@ static int omap_gpio_irq_type(struct irq_data *d, unsigned type)
else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
__irq_set_handler_locked(d->irq, handle_edge_irq);
+ return 0;
+
+error:
+ if (!BANK_USED(bank))
+ pm_runtime_put(bank->dev);
return retval;
}
@@ -638,15 +646,6 @@ static int omap_set_gpio_wakeup(struct gpio_bank *bank, unsigned offset,
return 0;
}
-static void omap_reset_gpio(struct gpio_bank *bank, unsigned offset)
-{
- omap_set_gpio_direction(bank, offset, 1);
- omap_set_gpio_irqenable(bank, offset, 0);
- omap_clear_gpio_irqstatus(bank, offset);
- omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
- omap_clear_gpio_debounce(bank, offset);
-}
-
/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
static int omap_gpio_wake_enable(struct irq_data *d, unsigned int enable)
{
@@ -669,14 +668,7 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
pm_runtime_get_sync(bank->dev);
spin_lock_irqsave(&bank->lock, flags);
- /* Set trigger to none. You need to enable the desired trigger with
- * request_irq() or set_irq_type(). Only do this if the IRQ line has
- * not already been requested.
- */
- if (!LINE_USED(bank->irq_usage, offset)) {
- omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
- omap_enable_gpio_module(bank, offset);
- }
+ omap_enable_gpio_module(bank, offset);
bank->mod_usage |= BIT(offset);
spin_unlock_irqrestore(&bank->lock, flags);
@@ -690,8 +682,11 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
spin_lock_irqsave(&bank->lock, flags);
bank->mod_usage &= ~(BIT(offset));
+ if (!LINE_USED(bank->irq_usage, offset)) {
+ omap_set_gpio_direction(bank, offset, 1);
+ omap_clear_gpio_debounce(bank, offset);
+ }
omap_disable_gpio_module(bank, offset);
- omap_reset_gpio(bank, offset);
spin_unlock_irqrestore(&bank->lock, flags);
/*
@@ -795,11 +790,23 @@ static unsigned int omap_gpio_irq_startup(struct irq_data *d)
pm_runtime_get_sync(bank->dev);
spin_lock_irqsave(&bank->lock, flags);
- omap_gpio_init_irq(bank, offset);
+
+ if (!LINE_USED(bank->mod_usage, offset))
+ omap_set_gpio_direction(bank, offset, 1);
+ else if (!omap_gpio_is_input(bank, offset))
+ goto err;
+ omap_enable_gpio_module(bank, offset);
+ bank->irq_usage |= BIT(offset);
+
spin_unlock_irqrestore(&bank->lock, flags);
omap_gpio_unmask_irq(d);
return 0;
+err:
+ spin_unlock_irqrestore(&bank->lock, flags);
+ if (!BANK_USED(bank))
+ pm_runtime_put(bank->dev);
+ return -EINVAL;
}
static void omap_gpio_irq_shutdown(struct irq_data *d)
@@ -810,8 +817,12 @@ static void omap_gpio_irq_shutdown(struct irq_data *d)
spin_lock_irqsave(&bank->lock, flags);
bank->irq_usage &= ~(BIT(offset));
+ omap_set_gpio_irqenable(bank, offset, 0);
+ omap_clear_gpio_irqstatus(bank, offset);
+ omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
+ if (!LINE_USED(bank->mod_usage, offset))
+ omap_clear_gpio_debounce(bank, offset);
omap_disable_gpio_module(bank, offset);
- omap_reset_gpio(bank, offset);
spin_unlock_irqrestore(&bank->lock, flags);
/*
@@ -1233,6 +1244,17 @@ static int omap_gpio_probe(struct platform_device *pdev)
return 0;
}
+static int omap_gpio_remove(struct platform_device *pdev)
+{
+ struct gpio_bank *bank = platform_get_drvdata(pdev);
+
+ list_del(&bank->node);
+ gpiochip_remove(&bank->chip);
+ pm_runtime_disable(bank->dev);
+
+ return 0;
+}
+
#ifdef CONFIG_ARCH_OMAP2PLUS
#if defined(CONFIG_PM)
@@ -1418,6 +1440,7 @@ static int omap_gpio_runtime_resume(struct device *dev)
}
#endif /* CONFIG_PM */
+#if IS_BUILTIN(CONFIG_GPIO_OMAP)
void omap2_gpio_prepare_for_idle(int pwr_mode)
{
struct gpio_bank *bank;
@@ -1443,6 +1466,7 @@ void omap2_gpio_resume_after_idle(void)
pm_runtime_get_sync(bank->dev);
}
}
+#endif
#if defined(CONFIG_PM)
static void omap_gpio_init_context(struct gpio_bank *p)
@@ -1598,6 +1622,7 @@ MODULE_DEVICE_TABLE(of, omap_gpio_match);
static struct platform_driver omap_gpio_driver = {
.probe = omap_gpio_probe,
+ .remove = omap_gpio_remove,
.driver = {
.name = "omap_gpio",
.pm = &gpio_pm_ops,
@@ -1615,3 +1640,13 @@ static int __init omap_gpio_drv_reg(void)
return platform_driver_register(&omap_gpio_driver);
}
postcore_initcall(omap_gpio_drv_reg);
+
+static void __exit omap_gpio_exit(void)
+{
+ platform_driver_unregister(&omap_gpio_driver);
+}
+module_exit(omap_gpio_exit);
+
+MODULE_DESCRIPTION("omap gpio driver");
+MODULE_ALIAS("platform:gpio-omap");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index e2da64abbccd..d233eb3b8132 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -443,12 +443,13 @@ static struct irq_chip pca953x_irq_chip = {
.irq_set_type = pca953x_irq_set_type,
};
-static u8 pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending)
+static bool pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending)
{
u8 cur_stat[MAX_BANK];
u8 old_stat[MAX_BANK];
- u8 pendings = 0;
- u8 trigger[MAX_BANK], triggers = 0;
+ bool pending_seen = false;
+ bool trigger_seen = false;
+ u8 trigger[MAX_BANK];
int ret, i, offset = 0;
switch (chip->chip_type) {
@@ -461,7 +462,7 @@ static u8 pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending)
}
ret = pca953x_read_regs(chip, offset, cur_stat);
if (ret)
- return 0;
+ return false;
/* Remove output pins from the equation */
for (i = 0; i < NBANK(chip); i++)
@@ -471,11 +472,12 @@ static u8 pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending)
for (i = 0; i < NBANK(chip); i++) {
trigger[i] = (cur_stat[i] ^ old_stat[i]) & chip->irq_mask[i];
- triggers += trigger[i];
+ if (trigger[i])
+ trigger_seen = true;
}
- if (!triggers)
- return 0;
+ if (!trigger_seen)
+ return false;
memcpy(chip->irq_stat, cur_stat, NBANK(chip));
@@ -483,10 +485,11 @@ static u8 pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending)
pending[i] = (old_stat[i] & chip->irq_trig_fall[i]) |
(cur_stat[i] & chip->irq_trig_raise[i]);
pending[i] &= trigger[i];
- pendings += pending[i];
+ if (pending[i])
+ pending_seen = true;
}
- return pendings;
+ return pending_seen;
}
static irqreturn_t pca953x_irq_handler(int irq, void *devid)
@@ -630,7 +633,7 @@ static int device_pca957x_init(struct pca953x_chip *chip, u32 invert)
memset(val, 0, NBANK(chip));
pca953x_write_regs(chip, PCA957X_INVRT, val);
- /* To enable register 6, 7 to controll pull up and pull down */
+ /* To enable register 6, 7 to control pull up and pull down */
memset(val, 0x02, NBANK(chip));
pca953x_write_regs(chip, PCA957X_BKEN, val);
diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c
index 945f0cda8529..404f3c61ef9b 100644
--- a/drivers/gpio/gpio-pcf857x.c
+++ b/drivers/gpio/gpio-pcf857x.c
@@ -91,6 +91,8 @@ struct pcf857x {
spinlock_t slock; /* protect irq demux */
unsigned out; /* software latch */
unsigned status; /* current status */
+ unsigned int irq_parent;
+ unsigned irq_enabled; /* enabled irqs */
int (*write)(struct i2c_client *client, unsigned data);
int (*read)(struct i2c_client *client);
@@ -194,7 +196,7 @@ static irqreturn_t pcf857x_irq(int irq, void *data)
* interrupt source, just to avoid bad irqs
*/
- change = (gpio->status ^ status);
+ change = (gpio->status ^ status) & gpio->irq_enabled;
for_each_set_bit(i, &change, gpio->chip.ngpio)
handle_nested_irq(irq_find_mapping(gpio->chip.irqdomain, i));
gpio->status = status;
@@ -209,29 +211,62 @@ static irqreturn_t pcf857x_irq(int irq, void *data)
*/
static void noop(struct irq_data *data) { }
-static unsigned int noop_ret(struct irq_data *data)
+static int pcf857x_irq_set_wake(struct irq_data *data, unsigned int on)
{
- return 0;
+ struct pcf857x *gpio = irq_data_get_irq_chip_data(data);
+
+ int error = 0;
+
+ if (gpio->irq_parent) {
+ error = irq_set_irq_wake(gpio->irq_parent, on);
+ if (error) {
+ dev_dbg(&gpio->client->dev,
+ "irq %u doesn't support irq_set_wake\n",
+ gpio->irq_parent);
+ gpio->irq_parent = 0;
+ }
+ }
+ return error;
}
-static int pcf857x_irq_set_wake(struct irq_data *data, unsigned int on)
+static void pcf857x_irq_enable(struct irq_data *data)
{
struct pcf857x *gpio = irq_data_get_irq_chip_data(data);
- irq_set_irq_wake(gpio->client->irq, on);
- return 0;
+ gpio->irq_enabled |= (1 << data->hwirq);
+}
+
+static void pcf857x_irq_disable(struct irq_data *data)
+{
+ struct pcf857x *gpio = irq_data_get_irq_chip_data(data);
+
+ gpio->irq_enabled &= ~(1 << data->hwirq);
+}
+
+static void pcf857x_irq_bus_lock(struct irq_data *data)
+{
+ struct pcf857x *gpio = irq_data_get_irq_chip_data(data);
+
+ mutex_lock(&gpio->lock);
+}
+
+static void pcf857x_irq_bus_sync_unlock(struct irq_data *data)
+{
+ struct pcf857x *gpio = irq_data_get_irq_chip_data(data);
+
+ mutex_unlock(&gpio->lock);
}
static struct irq_chip pcf857x_irq_chip = {
.name = "pcf857x",
- .irq_startup = noop_ret,
- .irq_shutdown = noop,
- .irq_enable = noop,
- .irq_disable = noop,
+ .irq_enable = pcf857x_irq_enable,
+ .irq_disable = pcf857x_irq_disable,
.irq_ack = noop,
.irq_mask = noop,
.irq_unmask = noop,
.irq_set_wake = pcf857x_irq_set_wake,
+ .irq_bus_lock = pcf857x_irq_bus_lock,
+ .irq_bus_sync_unlock = pcf857x_irq_bus_sync_unlock,
};
/*-------------------------------------------------------------------------*/
@@ -364,6 +399,7 @@ static int pcf857x_probe(struct i2c_client *client,
gpiochip_set_chained_irqchip(&gpio->chip, &pcf857x_irq_chip,
client->irq, NULL);
+ gpio->irq_parent = client->irq;
}
/* Let platform code set up the GPIOs and their users.
diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
index fd3977465948..1e14a6c74ed1 100644
--- a/drivers/gpio/gpio-rcar.c
+++ b/drivers/gpio/gpio-rcar.c
@@ -177,8 +177,17 @@ static int gpio_rcar_irq_set_wake(struct irq_data *d, unsigned int on)
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct gpio_rcar_priv *p = container_of(gc, struct gpio_rcar_priv,
gpio_chip);
-
- irq_set_irq_wake(p->irq_parent, on);
+ int error;
+
+ if (p->irq_parent) {
+ error = irq_set_irq_wake(p->irq_parent, on);
+ if (error) {
+ dev_dbg(&p->pdev->dev,
+ "irq %u doesn't support irq_set_wake\n",
+ p->irq_parent);
+ p->irq_parent = 0;
+ }
+ }
if (!p->clk)
return 0;
diff --git a/drivers/gpio/gpio-stp-xway.c b/drivers/gpio/gpio-stp-xway.c
index 202361eb7279..81bdbe7ba2a4 100644
--- a/drivers/gpio/gpio-stp-xway.c
+++ b/drivers/gpio/gpio-stp-xway.c
@@ -58,7 +58,7 @@
#define XWAY_STP_ADSL_MASK 0x3
/* 2 groups of 3 bits can be driven by the phys */
-#define XWAY_STP_PHY_MASK 0x3
+#define XWAY_STP_PHY_MASK 0x7
#define XWAY_STP_PHY1_SHIFT 27
#define XWAY_STP_PHY2_SHIFT 15
@@ -200,7 +200,7 @@ static int xway_stp_hw_init(struct xway_stp *chip)
static int xway_stp_probe(struct platform_device *pdev)
{
struct resource *res;
- const __be32 *shadow, *groups, *dsl, *phy;
+ u32 shadow, groups, dsl, phy;
struct xway_stp *chip;
struct clk *clk;
int ret = 0;
@@ -223,33 +223,28 @@ static int xway_stp_probe(struct platform_device *pdev)
chip->gc.owner = THIS_MODULE;
/* store the shadow value if one was passed by the devicetree */
- shadow = of_get_property(pdev->dev.of_node, "lantiq,shadow", NULL);
- if (shadow)
- chip->shadow = be32_to_cpu(*shadow);
+ if (!of_property_read_u32(pdev->dev.of_node, "lantiq,shadow", &shadow))
+ chip->shadow = shadow;
/* find out which gpio groups should be enabled */
- groups = of_get_property(pdev->dev.of_node, "lantiq,groups", NULL);
- if (groups)
- chip->groups = be32_to_cpu(*groups) & XWAY_STP_GROUP_MASK;
+ if (!of_property_read_u32(pdev->dev.of_node, "lantiq,groups", &groups))
+ chip->groups = groups & XWAY_STP_GROUP_MASK;
else
chip->groups = XWAY_STP_GROUP0;
chip->gc.ngpio = fls(chip->groups) * 8;
/* find out which gpios are controlled by the dsl core */
- dsl = of_get_property(pdev->dev.of_node, "lantiq,dsl", NULL);
- if (dsl)
- chip->dsl = be32_to_cpu(*dsl) & XWAY_STP_ADSL_MASK;
+ if (!of_property_read_u32(pdev->dev.of_node, "lantiq,dsl", &dsl))
+ chip->dsl = dsl & XWAY_STP_ADSL_MASK;
/* find out which gpios are controlled by the phys */
if (of_machine_is_compatible("lantiq,ar9") ||
of_machine_is_compatible("lantiq,gr9") ||
of_machine_is_compatible("lantiq,vr9")) {
- phy = of_get_property(pdev->dev.of_node, "lantiq,phy1", NULL);
- if (phy)
- chip->phy1 = be32_to_cpu(*phy) & XWAY_STP_PHY_MASK;
- phy = of_get_property(pdev->dev.of_node, "lantiq,phy2", NULL);
- if (phy)
- chip->phy2 = be32_to_cpu(*phy) & XWAY_STP_PHY_MASK;
+ if (!of_property_read_u32(pdev->dev.of_node, "lantiq,phy1", &phy))
+ chip->phy1 = phy & XWAY_STP_PHY_MASK;
+ if (!of_property_read_u32(pdev->dev.of_node, "lantiq,phy2", &phy))
+ chip->phy2 = phy & XWAY_STP_PHY_MASK;
}
/* check which edge trigger we should use, default to a falling edge */
diff --git a/drivers/gpio/gpio-tb10x.c b/drivers/gpio/gpio-tb10x.c
index 46b89614aa91..12c99d969b98 100644
--- a/drivers/gpio/gpio-tb10x.c
+++ b/drivers/gpio/gpio-tb10x.c
@@ -292,7 +292,6 @@ static int tb10x_gpio_remove(struct platform_device *pdev)
BIT(tb10x_gpio->gc.ngpio) - 1, 0, 0);
kfree(tb10x_gpio->domain->gc);
irq_domain_remove(tb10x_gpio->domain);
- free_irq(tb10x_gpio->irq, tb10x_gpio);
}
gpiochip_remove(&tb10x_gpio->gc);
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index 56dcc8ed98de..9b25c90f725c 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -288,7 +288,7 @@ static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
tegra_gpio_writel(1 << pin, GPIO_INT_CLR(gpio));
/* if gpio is edge triggered, clear condition
- * before executing the hander so that we don't
+ * before executing the handler so that we don't
* miss edges
*/
if (lvl & (0x100 << pin)) {
diff --git a/drivers/gpio/gpio-ts5500.c b/drivers/gpio/gpio-ts5500.c
index 92fbabd82879..b29a102d136b 100644
--- a/drivers/gpio/gpio-ts5500.c
+++ b/drivers/gpio/gpio-ts5500.c
@@ -440,7 +440,7 @@ static int ts5500_dio_remove(struct platform_device *pdev)
return 0;
}
-static struct platform_device_id ts5500_dio_ids[] = {
+static const struct platform_device_id ts5500_dio_ids[] = {
{ "ts5500-dio1", TS5500_DIO1 },
{ "ts5500-dio2", TS5500_DIO2 },
{ "ts5500-dio-lcd", TS5500_LCD },
diff --git a/drivers/gpio/gpio-xgene-sb.c b/drivers/gpio/gpio-xgene-sb.c
index fb9d29a5d584..d57068b9083e 100644
--- a/drivers/gpio/gpio-xgene-sb.c
+++ b/drivers/gpio/gpio-xgene-sb.c
@@ -25,8 +25,11 @@
#include <linux/of_gpio.h>
#include <linux/gpio.h>
#include <linux/gpio/driver.h>
+#include <linux/acpi.h>
#include <linux/basic_mmio_gpio.h>
+#include "gpiolib.h"
+
#define XGENE_MAX_GPIO_DS 22
#define XGENE_MAX_GPIO_DS_IRQ 6
@@ -112,7 +115,6 @@ static int xgene_gpio_sb_probe(struct platform_device *pdev)
GFP_KERNEL);
if (!priv->irq)
return -ENOMEM;
- memset(priv->irq, 0, sizeof(u32) * XGENE_MAX_GPIO_DS);
for (i = 0; i < priv->nirq; i++) {
priv->irq[default_lines[i]] = platform_get_irq(pdev, i);
@@ -129,6 +131,11 @@ static int xgene_gpio_sb_probe(struct platform_device *pdev)
else
dev_info(&pdev->dev, "X-Gene GPIO Standby driver registered\n");
+ if (priv->nirq > 0) {
+ /* Register interrupt handlers for gpio signaled acpi events */
+ acpi_gpiochip_request_interrupts(&priv->bgc.gc);
+ }
+
return ret;
}
@@ -136,6 +143,10 @@ static int xgene_gpio_sb_remove(struct platform_device *pdev)
{
struct xgene_gpio_sb *priv = platform_get_drvdata(pdev);
+ if (priv->nirq > 0) {
+ acpi_gpiochip_free_interrupts(&priv->bgc.gc);
+ }
+
return bgpio_remove(&priv->bgc);
}
@@ -145,10 +156,19 @@ static const struct of_device_id xgene_gpio_sb_of_match[] = {
};
MODULE_DEVICE_TABLE(of, xgene_gpio_sb_of_match);
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id xgene_gpio_sb_acpi_match[] = {
+ {"APMC0D15", 0},
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, xgene_gpio_sb_acpi_match);
+#endif
+
static struct platform_driver xgene_gpio_sb_driver = {
.driver = {
.name = "xgene-gpio-sb",
.of_match_table = xgene_gpio_sb_of_match,
+ .acpi_match_table = ACPI_PTR(xgene_gpio_sb_acpi_match),
},
.probe = xgene_gpio_sb_probe,
.remove = xgene_gpio_sb_remove,
diff --git a/drivers/gpio/gpio-xilinx.c b/drivers/gpio/gpio-xilinx.c
index 61243d177740..77fe5d3cb105 100644
--- a/drivers/gpio/gpio-xilinx.c
+++ b/drivers/gpio/gpio-xilinx.c
@@ -41,10 +41,10 @@
/**
* struct xgpio_instance - Stores information about GPIO device
* @mmchip: OF GPIO chip for memory mapped banks
+ * @gpio_width: GPIO width for every channel
* @gpio_state: GPIO state shadow register
* @gpio_dir: GPIO direction shadow register
* @gpio_lock: Lock used for synchronization
- * @inited: True if the port has been inited
*/
struct xgpio_instance {
struct of_mm_gpio_chip mmchip;
@@ -231,6 +231,8 @@ static void xgpio_save_regs(struct of_mm_gpio_chip *mm_gc)
* @pdev: pointer to the platform device
*
* This function remove gpiochips and frees all the allocated resources.
+ *
+ * Return: 0 always
*/
static int xgpio_remove(struct platform_device *pdev)
{
diff --git a/drivers/gpio/gpio-xlp.c b/drivers/gpio/gpio-xlp.c
new file mode 100644
index 000000000000..9bdab7203d65
--- /dev/null
+++ b/drivers/gpio/gpio-xlp.c
@@ -0,0 +1,427 @@
+/*
+ * Copyright (C) 2003-2015 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+/*
+ * XLP GPIO has multiple 32 bit registers for each feature where each register
+ * controls 32 pins. So, pins up to 64 require 2 32-bit registers and up to 96
+ * require 3 32-bit registers for each feature.
+ * Here we only define offset of the first register for each feature. Offset of
+ * the registers for pins greater than 32 can be calculated as following(Use
+ * GPIO_INT_STAT as example):
+ *
+ * offset = (gpio / XLP_GPIO_REGSZ) * 4;
+ * reg_addr = addr + offset;
+ *
+ * where addr is base address of the that feature register and gpio is the pin.
+ */
+#define GPIO_OUTPUT_EN 0x00
+#define GPIO_PADDRV 0x08
+#define GPIO_INT_EN00 0x18
+#define GPIO_INT_EN10 0x20
+#define GPIO_INT_EN20 0x28
+#define GPIO_INT_EN30 0x30
+#define GPIO_INT_POL 0x38
+#define GPIO_INT_TYPE 0x40
+#define GPIO_INT_STAT 0x48
+
+#define GPIO_9XX_BYTESWAP 0X00
+#define GPIO_9XX_CTRL 0X04
+#define GPIO_9XX_OUTPUT_EN 0x14
+#define GPIO_9XX_PADDRV 0x24
+/*
+ * Only for 4 interrupt enable reg are defined for now,
+ * total reg available are 12.
+ */
+#define GPIO_9XX_INT_EN00 0x44
+#define GPIO_9XX_INT_EN10 0x54
+#define GPIO_9XX_INT_EN20 0x64
+#define GPIO_9XX_INT_EN30 0x74
+#define GPIO_9XX_INT_POL 0x104
+#define GPIO_9XX_INT_TYPE 0x114
+#define GPIO_9XX_INT_STAT 0x124
+
+#define GPIO_3XX_INT_EN00 0x18
+#define GPIO_3XX_INT_EN10 0x20
+#define GPIO_3XX_INT_EN20 0x28
+#define GPIO_3XX_INT_EN30 0x30
+#define GPIO_3XX_INT_POL 0x78
+#define GPIO_3XX_INT_TYPE 0x80
+#define GPIO_3XX_INT_STAT 0x88
+
+/* Interrupt type register mask */
+#define XLP_GPIO_IRQ_TYPE_LVL 0x0
+#define XLP_GPIO_IRQ_TYPE_EDGE 0x1
+
+/* Interrupt polarity register mask */
+#define XLP_GPIO_IRQ_POL_HIGH 0x0
+#define XLP_GPIO_IRQ_POL_LOW 0x1
+
+#define XLP_GPIO_REGSZ 32
+#define XLP_GPIO_IRQ_BASE 768
+#define XLP_MAX_NR_GPIO 96
+
+/* XLP variants supported by this driver */
+enum {
+ XLP_GPIO_VARIANT_XLP832 = 1,
+ XLP_GPIO_VARIANT_XLP316,
+ XLP_GPIO_VARIANT_XLP208,
+ XLP_GPIO_VARIANT_XLP980,
+ XLP_GPIO_VARIANT_XLP532
+};
+
+struct xlp_gpio_priv {
+ struct gpio_chip chip;
+ DECLARE_BITMAP(gpio_enabled_mask, XLP_MAX_NR_GPIO);
+ void __iomem *gpio_intr_en; /* pointer to first intr enable reg */
+ void __iomem *gpio_intr_stat; /* pointer to first intr status reg */
+ void __iomem *gpio_intr_type; /* pointer to first intr type reg */
+ void __iomem *gpio_intr_pol; /* pointer to first intr polarity reg */
+ void __iomem *gpio_out_en; /* pointer to first output enable reg */
+ void __iomem *gpio_paddrv; /* pointer to first pad drive reg */
+ spinlock_t lock;
+};
+
+static struct xlp_gpio_priv *gpio_chip_to_xlp_priv(struct gpio_chip *gc)
+{
+ return container_of(gc, struct xlp_gpio_priv, chip);
+}
+
+static int xlp_gpio_get_reg(void __iomem *addr, unsigned gpio)
+{
+ u32 pos, regset;
+
+ pos = gpio % XLP_GPIO_REGSZ;
+ regset = (gpio / XLP_GPIO_REGSZ) * 4;
+ return !!(readl(addr + regset) & BIT(pos));
+}
+
+static void xlp_gpio_set_reg(void __iomem *addr, unsigned gpio, int state)
+{
+ u32 value, pos, regset;
+
+ pos = gpio % XLP_GPIO_REGSZ;
+ regset = (gpio / XLP_GPIO_REGSZ) * 4;
+ value = readl(addr + regset);
+
+ if (state)
+ value |= BIT(pos);
+ else
+ value &= ~BIT(pos);
+
+ writel(value, addr + regset);
+}
+
+static void xlp_gpio_irq_disable(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0);
+ __clear_bit(d->hwirq, priv->gpio_enabled_mask);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void xlp_gpio_irq_mask_ack(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0);
+ xlp_gpio_set_reg(priv->gpio_intr_stat, d->hwirq, 0x1);
+ __clear_bit(d->hwirq, priv->gpio_enabled_mask);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void xlp_gpio_irq_unmask(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x1);
+ __set_bit(d->hwirq, priv->gpio_enabled_mask);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int xlp_gpio_set_irq_type(struct irq_data *d, unsigned int type)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+ int pol, irq_type;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ irq_type = XLP_GPIO_IRQ_TYPE_EDGE;
+ pol = XLP_GPIO_IRQ_POL_HIGH;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ irq_type = XLP_GPIO_IRQ_TYPE_EDGE;
+ pol = XLP_GPIO_IRQ_POL_LOW;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ irq_type = XLP_GPIO_IRQ_TYPE_LVL;
+ pol = XLP_GPIO_IRQ_POL_HIGH;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ irq_type = XLP_GPIO_IRQ_TYPE_LVL;
+ pol = XLP_GPIO_IRQ_POL_LOW;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ xlp_gpio_set_reg(priv->gpio_intr_type, d->hwirq, irq_type);
+ xlp_gpio_set_reg(priv->gpio_intr_pol, d->hwirq, pol);
+
+ return 0;
+}
+
+static struct irq_chip xlp_gpio_irq_chip = {
+ .name = "XLP-GPIO",
+ .irq_mask_ack = xlp_gpio_irq_mask_ack,
+ .irq_disable = xlp_gpio_irq_disable,
+ .irq_set_type = xlp_gpio_set_irq_type,
+ .irq_unmask = xlp_gpio_irq_unmask,
+ .flags = IRQCHIP_ONESHOT_SAFE,
+};
+
+static irqreturn_t xlp_gpio_generic_handler(int irq, void *data)
+{
+ struct xlp_gpio_priv *priv = data;
+ int gpio, regoff;
+ u32 gpio_stat;
+
+ regoff = -1;
+ gpio_stat = 0;
+ for_each_set_bit(gpio, priv->gpio_enabled_mask, XLP_MAX_NR_GPIO) {
+ if (regoff != gpio / XLP_GPIO_REGSZ) {
+ regoff = gpio / XLP_GPIO_REGSZ;
+ gpio_stat = readl(priv->gpio_intr_stat + regoff * 4);
+ }
+ if (gpio_stat & BIT(gpio % XLP_GPIO_REGSZ))
+ generic_handle_irq(irq_find_mapping(
+ priv->chip.irqdomain, gpio));
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int xlp_gpio_dir_output(struct gpio_chip *gc, unsigned gpio, int state)
+{
+ struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+
+ BUG_ON(gpio >= gc->ngpio);
+ xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x1);
+
+ return 0;
+}
+
+static int xlp_gpio_dir_input(struct gpio_chip *gc, unsigned gpio)
+{
+ struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+
+ BUG_ON(gpio >= gc->ngpio);
+ xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x0);
+
+ return 0;
+}
+
+static int xlp_gpio_get(struct gpio_chip *gc, unsigned gpio)
+{
+ struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+
+ BUG_ON(gpio >= gc->ngpio);
+ return xlp_gpio_get_reg(priv->gpio_paddrv, gpio);
+}
+
+static void xlp_gpio_set(struct gpio_chip *gc, unsigned gpio, int state)
+{
+ struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+
+ BUG_ON(gpio >= gc->ngpio);
+ xlp_gpio_set_reg(priv->gpio_paddrv, gpio, state);
+}
+
+static const struct of_device_id xlp_gpio_of_ids[] = {
+ {
+ .compatible = "netlogic,xlp832-gpio",
+ .data = (void *)XLP_GPIO_VARIANT_XLP832,
+ },
+ {
+ .compatible = "netlogic,xlp316-gpio",
+ .data = (void *)XLP_GPIO_VARIANT_XLP316,
+ },
+ {
+ .compatible = "netlogic,xlp208-gpio",
+ .data = (void *)XLP_GPIO_VARIANT_XLP208,
+ },
+ {
+ .compatible = "netlogic,xlp980-gpio",
+ .data = (void *)XLP_GPIO_VARIANT_XLP980,
+ },
+ {
+ .compatible = "netlogic,xlp532-gpio",
+ .data = (void *)XLP_GPIO_VARIANT_XLP532,
+ },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, xlp_gpio_of_ids);
+
+static int xlp_gpio_probe(struct platform_device *pdev)
+{
+ struct gpio_chip *gc;
+ struct resource *iores;
+ struct xlp_gpio_priv *priv;
+ const struct of_device_id *of_id;
+ void __iomem *gpio_base;
+ int irq_base, irq, err;
+ int ngpio;
+ u32 soc_type;
+
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iores)
+ return -ENODEV;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ gpio_base = devm_ioremap_resource(&pdev->dev, iores);
+ if (IS_ERR(gpio_base))
+ return PTR_ERR(gpio_base);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ of_id = of_match_device(xlp_gpio_of_ids, &pdev->dev);
+ if (!of_id) {
+ dev_err(&pdev->dev, "Failed to get soc type!\n");
+ return -ENODEV;
+ }
+
+ soc_type = (uintptr_t) of_id->data;
+
+ switch (soc_type) {
+ case XLP_GPIO_VARIANT_XLP832:
+ priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN;
+ priv->gpio_paddrv = gpio_base + GPIO_PADDRV;
+ priv->gpio_intr_stat = gpio_base + GPIO_INT_STAT;
+ priv->gpio_intr_type = gpio_base + GPIO_INT_TYPE;
+ priv->gpio_intr_pol = gpio_base + GPIO_INT_POL;
+ priv->gpio_intr_en = gpio_base + GPIO_INT_EN00;
+ ngpio = 41;
+ break;
+ case XLP_GPIO_VARIANT_XLP208:
+ case XLP_GPIO_VARIANT_XLP316:
+ priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN;
+ priv->gpio_paddrv = gpio_base + GPIO_PADDRV;
+ priv->gpio_intr_stat = gpio_base + GPIO_3XX_INT_STAT;
+ priv->gpio_intr_type = gpio_base + GPIO_3XX_INT_TYPE;
+ priv->gpio_intr_pol = gpio_base + GPIO_3XX_INT_POL;
+ priv->gpio_intr_en = gpio_base + GPIO_3XX_INT_EN00;
+
+ ngpio = (soc_type == XLP_GPIO_VARIANT_XLP208) ? 42 : 57;
+ break;
+ case XLP_GPIO_VARIANT_XLP980:
+ case XLP_GPIO_VARIANT_XLP532:
+ priv->gpio_out_en = gpio_base + GPIO_9XX_OUTPUT_EN;
+ priv->gpio_paddrv = gpio_base + GPIO_9XX_PADDRV;
+ priv->gpio_intr_stat = gpio_base + GPIO_9XX_INT_STAT;
+ priv->gpio_intr_type = gpio_base + GPIO_9XX_INT_TYPE;
+ priv->gpio_intr_pol = gpio_base + GPIO_9XX_INT_POL;
+ priv->gpio_intr_en = gpio_base + GPIO_9XX_INT_EN00;
+
+ ngpio = (soc_type == XLP_GPIO_VARIANT_XLP980) ? 66 : 67;
+ break;
+ default:
+ dev_err(&pdev->dev, "Unknown Processor type!\n");
+ return -ENODEV;
+ }
+
+ bitmap_zero(priv->gpio_enabled_mask, XLP_MAX_NR_GPIO);
+
+ gc = &priv->chip;
+
+ gc->owner = THIS_MODULE;
+ gc->label = dev_name(&pdev->dev);
+ gc->base = 0;
+ gc->dev = &pdev->dev;
+ gc->ngpio = ngpio;
+ gc->of_node = pdev->dev.of_node;
+ gc->direction_output = xlp_gpio_dir_output;
+ gc->direction_input = xlp_gpio_dir_input;
+ gc->set = xlp_gpio_set;
+ gc->get = xlp_gpio_get;
+
+ spin_lock_init(&priv->lock);
+
+ err = devm_request_irq(&pdev->dev, irq, xlp_gpio_generic_handler,
+ IRQ_TYPE_NONE, pdev->name, priv);
+ if (err)
+ return err;
+
+ irq_base = irq_alloc_descs(-1, XLP_GPIO_IRQ_BASE, gc->ngpio, 0);
+ if (irq_base < 0) {
+ dev_err(&pdev->dev, "Failed to allocate IRQ numbers\n");
+ return err;
+ }
+
+ err = gpiochip_add(gc);
+ if (err < 0)
+ goto out_free_desc;
+
+ err = gpiochip_irqchip_add(gc, &xlp_gpio_irq_chip, irq_base,
+ handle_level_irq, IRQ_TYPE_NONE);
+ if (err) {
+ dev_err(&pdev->dev, "Could not connect irqchip to gpiochip!\n");
+ goto out_gpio_remove;
+ }
+
+ dev_info(&pdev->dev, "registered %d GPIOs\n", gc->ngpio);
+
+ return 0;
+
+out_gpio_remove:
+ gpiochip_remove(gc);
+out_free_desc:
+ irq_free_descs(irq_base, gc->ngpio);
+ return err;
+}
+
+static struct platform_driver xlp_gpio_driver = {
+ .driver = {
+ .name = "xlp-gpio",
+ .of_match_table = xlp_gpio_of_ids,
+ },
+ .probe = xlp_gpio_probe,
+};
+module_platform_driver(xlp_gpio_driver);
+
+MODULE_AUTHOR("Kamlakant Patel <kamlakant.patel@broadcom.com>");
+MODULE_AUTHOR("Ganesan Ramalingam <ganesanr@broadcom.com>");
+MODULE_DESCRIPTION("Netlogic XLP GPIO Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
index 184c4b1b2558..2e87c4b8da26 100644
--- a/drivers/gpio/gpio-zynq.c
+++ b/drivers/gpio/gpio-zynq.c
@@ -18,34 +18,47 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <linux/of.h>
#define DRIVER_NAME "zynq-gpio"
/* Maximum banks */
#define ZYNQ_GPIO_MAX_BANK 4
+#define ZYNQMP_GPIO_MAX_BANK 6
#define ZYNQ_GPIO_BANK0_NGPIO 32
#define ZYNQ_GPIO_BANK1_NGPIO 22
#define ZYNQ_GPIO_BANK2_NGPIO 32
#define ZYNQ_GPIO_BANK3_NGPIO 32
-#define ZYNQ_GPIO_NR_GPIOS (ZYNQ_GPIO_BANK0_NGPIO + \
- ZYNQ_GPIO_BANK1_NGPIO + \
- ZYNQ_GPIO_BANK2_NGPIO + \
- ZYNQ_GPIO_BANK3_NGPIO)
-
-#define ZYNQ_GPIO_BANK0_PIN_MIN 0
-#define ZYNQ_GPIO_BANK0_PIN_MAX (ZYNQ_GPIO_BANK0_PIN_MIN + \
- ZYNQ_GPIO_BANK0_NGPIO - 1)
-#define ZYNQ_GPIO_BANK1_PIN_MIN (ZYNQ_GPIO_BANK0_PIN_MAX + 1)
-#define ZYNQ_GPIO_BANK1_PIN_MAX (ZYNQ_GPIO_BANK1_PIN_MIN + \
- ZYNQ_GPIO_BANK1_NGPIO - 1)
-#define ZYNQ_GPIO_BANK2_PIN_MIN (ZYNQ_GPIO_BANK1_PIN_MAX + 1)
-#define ZYNQ_GPIO_BANK2_PIN_MAX (ZYNQ_GPIO_BANK2_PIN_MIN + \
- ZYNQ_GPIO_BANK2_NGPIO - 1)
-#define ZYNQ_GPIO_BANK3_PIN_MIN (ZYNQ_GPIO_BANK2_PIN_MAX + 1)
-#define ZYNQ_GPIO_BANK3_PIN_MAX (ZYNQ_GPIO_BANK3_PIN_MIN + \
- ZYNQ_GPIO_BANK3_NGPIO - 1)
+#define ZYNQMP_GPIO_BANK0_NGPIO 26
+#define ZYNQMP_GPIO_BANK1_NGPIO 26
+#define ZYNQMP_GPIO_BANK2_NGPIO 26
+#define ZYNQMP_GPIO_BANK3_NGPIO 32
+#define ZYNQMP_GPIO_BANK4_NGPIO 32
+#define ZYNQMP_GPIO_BANK5_NGPIO 32
+
+#define ZYNQ_GPIO_NR_GPIOS 118
+#define ZYNQMP_GPIO_NR_GPIOS 174
+
+#define ZYNQ_GPIO_BANK0_PIN_MIN(str) 0
+#define ZYNQ_GPIO_BANK0_PIN_MAX(str) (ZYNQ_GPIO_BANK0_PIN_MIN(str) + \
+ ZYNQ##str##_GPIO_BANK0_NGPIO - 1)
+#define ZYNQ_GPIO_BANK1_PIN_MIN(str) (ZYNQ_GPIO_BANK0_PIN_MAX(str) + 1)
+#define ZYNQ_GPIO_BANK1_PIN_MAX(str) (ZYNQ_GPIO_BANK1_PIN_MIN(str) + \
+ ZYNQ##str##_GPIO_BANK1_NGPIO - 1)
+#define ZYNQ_GPIO_BANK2_PIN_MIN(str) (ZYNQ_GPIO_BANK1_PIN_MAX(str) + 1)
+#define ZYNQ_GPIO_BANK2_PIN_MAX(str) (ZYNQ_GPIO_BANK2_PIN_MIN(str) + \
+ ZYNQ##str##_GPIO_BANK2_NGPIO - 1)
+#define ZYNQ_GPIO_BANK3_PIN_MIN(str) (ZYNQ_GPIO_BANK2_PIN_MAX(str) + 1)
+#define ZYNQ_GPIO_BANK3_PIN_MAX(str) (ZYNQ_GPIO_BANK3_PIN_MIN(str) + \
+ ZYNQ##str##_GPIO_BANK3_NGPIO - 1)
+#define ZYNQ_GPIO_BANK4_PIN_MIN(str) (ZYNQ_GPIO_BANK3_PIN_MAX(str) + 1)
+#define ZYNQ_GPIO_BANK4_PIN_MAX(str) (ZYNQ_GPIO_BANK4_PIN_MIN(str) + \
+ ZYNQ##str##_GPIO_BANK4_NGPIO - 1)
+#define ZYNQ_GPIO_BANK5_PIN_MIN(str) (ZYNQ_GPIO_BANK4_PIN_MAX(str) + 1)
+#define ZYNQ_GPIO_BANK5_PIN_MAX(str) (ZYNQ_GPIO_BANK5_PIN_MIN(str) + \
+ ZYNQ##str##_GPIO_BANK5_NGPIO - 1)
/* Register offsets for the GPIO device */
@@ -89,12 +102,30 @@
* @base_addr: base address of the GPIO device
* @clk: clock resource for this controller
* @irq: interrupt for the GPIO device
+ * @p_data: pointer to platform data
*/
struct zynq_gpio {
struct gpio_chip chip;
void __iomem *base_addr;
struct clk *clk;
int irq;
+ const struct zynq_platform_data *p_data;
+};
+
+/**
+ * struct zynq_platform_data - zynq gpio platform data structure
+ * @label: string to store in gpio->label
+ * @ngpio: max number of gpio pins
+ * @max_bank: maximum number of gpio banks
+ * @bank_min: this array represents bank's min pin
+ * @bank_max: this array represents bank's max pin
+*/
+struct zynq_platform_data {
+ const char *label;
+ u16 ngpio;
+ int max_bank;
+ int bank_min[ZYNQMP_GPIO_MAX_BANK];
+ int bank_max[ZYNQMP_GPIO_MAX_BANK];
};
static struct irq_chip zynq_gpio_level_irqchip;
@@ -112,39 +143,26 @@ static struct irq_chip zynq_gpio_edge_irqchip;
*/
static inline void zynq_gpio_get_bank_pin(unsigned int pin_num,
unsigned int *bank_num,
- unsigned int *bank_pin_num)
+ unsigned int *bank_pin_num,
+ struct zynq_gpio *gpio)
{
- switch (pin_num) {
- case ZYNQ_GPIO_BANK0_PIN_MIN ... ZYNQ_GPIO_BANK0_PIN_MAX:
- *bank_num = 0;
- *bank_pin_num = pin_num;
- break;
- case ZYNQ_GPIO_BANK1_PIN_MIN ... ZYNQ_GPIO_BANK1_PIN_MAX:
- *bank_num = 1;
- *bank_pin_num = pin_num - ZYNQ_GPIO_BANK1_PIN_MIN;
- break;
- case ZYNQ_GPIO_BANK2_PIN_MIN ... ZYNQ_GPIO_BANK2_PIN_MAX:
- *bank_num = 2;
- *bank_pin_num = pin_num - ZYNQ_GPIO_BANK2_PIN_MIN;
- break;
- case ZYNQ_GPIO_BANK3_PIN_MIN ... ZYNQ_GPIO_BANK3_PIN_MAX:
- *bank_num = 3;
- *bank_pin_num = pin_num - ZYNQ_GPIO_BANK3_PIN_MIN;
- break;
- default:
- WARN(true, "invalid GPIO pin number: %u", pin_num);
- *bank_num = 0;
- *bank_pin_num = 0;
- break;
+ int bank;
+
+ for (bank = 0; bank < gpio->p_data->max_bank; bank++) {
+ if ((pin_num >= gpio->p_data->bank_min[bank]) &&
+ (pin_num <= gpio->p_data->bank_max[bank])) {
+ *bank_num = bank;
+ *bank_pin_num = pin_num -
+ gpio->p_data->bank_min[bank];
+ return;
+ }
}
-}
-static const unsigned int zynq_gpio_bank_offset[] = {
- ZYNQ_GPIO_BANK0_PIN_MIN,
- ZYNQ_GPIO_BANK1_PIN_MIN,
- ZYNQ_GPIO_BANK2_PIN_MIN,
- ZYNQ_GPIO_BANK3_PIN_MIN,
-};
+ /* default */
+ WARN(true, "invalid GPIO pin number: %u", pin_num);
+ *bank_num = 0;
+ *bank_pin_num = 0;
+}
/**
* zynq_gpio_get_value - Get the state of the specified pin of GPIO device
@@ -161,7 +179,7 @@ static int zynq_gpio_get_value(struct gpio_chip *chip, unsigned int pin)
unsigned int bank_num, bank_pin_num;
struct zynq_gpio *gpio = container_of(chip, struct zynq_gpio, chip);
- zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num);
+ zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio);
data = readl_relaxed(gpio->base_addr +
ZYNQ_GPIO_DATA_RO_OFFSET(bank_num));
@@ -185,7 +203,7 @@ static void zynq_gpio_set_value(struct gpio_chip *chip, unsigned int pin,
unsigned int reg_offset, bank_num, bank_pin_num;
struct zynq_gpio *gpio = container_of(chip, struct zynq_gpio, chip);
- zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num);
+ zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio);
if (bank_pin_num >= ZYNQ_GPIO_MID_PIN_NUM) {
/* only 16 data bits in bit maskable reg */
@@ -222,7 +240,7 @@ static int zynq_gpio_dir_in(struct gpio_chip *chip, unsigned int pin)
unsigned int bank_num, bank_pin_num;
struct zynq_gpio *gpio = container_of(chip, struct zynq_gpio, chip);
- zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num);
+ zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio);
/* bank 0 pins 7 and 8 are special and cannot be used as inputs */
if (bank_num == 0 && (bank_pin_num == 7 || bank_pin_num == 8))
@@ -255,7 +273,7 @@ static int zynq_gpio_dir_out(struct gpio_chip *chip, unsigned int pin,
unsigned int bank_num, bank_pin_num;
struct zynq_gpio *gpio = container_of(chip, struct zynq_gpio, chip);
- zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num);
+ zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio);
/* set the GPIO pin as output */
reg = readl_relaxed(gpio->base_addr + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
@@ -286,7 +304,7 @@ static void zynq_gpio_irq_mask(struct irq_data *irq_data)
struct zynq_gpio *gpio = irq_data_get_irq_chip_data(irq_data);
device_pin_num = irq_data->hwirq;
- zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num);
+ zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num, gpio);
writel_relaxed(BIT(bank_pin_num),
gpio->base_addr + ZYNQ_GPIO_INTDIS_OFFSET(bank_num));
}
@@ -306,7 +324,7 @@ static void zynq_gpio_irq_unmask(struct irq_data *irq_data)
struct zynq_gpio *gpio = irq_data_get_irq_chip_data(irq_data);
device_pin_num = irq_data->hwirq;
- zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num);
+ zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num, gpio);
writel_relaxed(BIT(bank_pin_num),
gpio->base_addr + ZYNQ_GPIO_INTEN_OFFSET(bank_num));
}
@@ -325,7 +343,7 @@ static void zynq_gpio_irq_ack(struct irq_data *irq_data)
struct zynq_gpio *gpio = irq_data_get_irq_chip_data(irq_data);
device_pin_num = irq_data->hwirq;
- zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num);
+ zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num, gpio);
writel_relaxed(BIT(bank_pin_num),
gpio->base_addr + ZYNQ_GPIO_INTSTS_OFFSET(bank_num));
}
@@ -335,7 +353,7 @@ static void zynq_gpio_irq_ack(struct irq_data *irq_data)
* @irq_data: irq data containing irq number of gpio pin for the interrupt
* to enable
*
- * Clears the INTSTS bit and unmasks the given interrrupt.
+ * Clears the INTSTS bit and unmasks the given interrupt.
*/
static void zynq_gpio_irq_enable(struct irq_data *irq_data)
{
@@ -375,7 +393,7 @@ static int zynq_gpio_set_irq_type(struct irq_data *irq_data, unsigned int type)
struct zynq_gpio *gpio = irq_data_get_irq_chip_data(irq_data);
device_pin_num = irq_data->hwirq;
- zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num);
+ zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num, gpio);
int_type = readl_relaxed(gpio->base_addr +
ZYNQ_GPIO_INTTYPE_OFFSET(bank_num));
@@ -470,7 +488,7 @@ static void zynq_gpio_handle_bank_irq(struct zynq_gpio *gpio,
unsigned int bank_num,
unsigned long pending)
{
- unsigned int bank_offset = zynq_gpio_bank_offset[bank_num];
+ unsigned int bank_offset = gpio->p_data->bank_min[bank_num];
struct irq_domain *irqdomain = gpio->chip.irqdomain;
int offset;
@@ -505,7 +523,7 @@ static void zynq_gpio_irqhandler(unsigned int irq, struct irq_desc *desc)
chained_irq_enter(irqchip, desc);
- for (bank_num = 0; bank_num < ZYNQ_GPIO_MAX_BANK; bank_num++) {
+ for (bank_num = 0; bank_num < gpio->p_data->max_bank; bank_num++) {
int_sts = readl_relaxed(gpio->base_addr +
ZYNQ_GPIO_INTSTS_OFFSET(bank_num));
int_enb = readl_relaxed(gpio->base_addr +
@@ -582,6 +600,46 @@ static const struct dev_pm_ops zynq_gpio_dev_pm_ops = {
zynq_gpio_runtime_resume, NULL)
};
+static const struct zynq_platform_data zynqmp_gpio_def = {
+ .label = "zynqmp_gpio",
+ .ngpio = ZYNQMP_GPIO_NR_GPIOS,
+ .max_bank = ZYNQMP_GPIO_MAX_BANK,
+ .bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(MP),
+ .bank_max[0] = ZYNQ_GPIO_BANK0_PIN_MAX(MP),
+ .bank_min[1] = ZYNQ_GPIO_BANK1_PIN_MIN(MP),
+ .bank_max[1] = ZYNQ_GPIO_BANK1_PIN_MAX(MP),
+ .bank_min[2] = ZYNQ_GPIO_BANK2_PIN_MIN(MP),
+ .bank_max[2] = ZYNQ_GPIO_BANK2_PIN_MAX(MP),
+ .bank_min[3] = ZYNQ_GPIO_BANK3_PIN_MIN(MP),
+ .bank_max[3] = ZYNQ_GPIO_BANK3_PIN_MAX(MP),
+ .bank_min[4] = ZYNQ_GPIO_BANK4_PIN_MIN(MP),
+ .bank_max[4] = ZYNQ_GPIO_BANK4_PIN_MAX(MP),
+ .bank_min[5] = ZYNQ_GPIO_BANK5_PIN_MIN(MP),
+ .bank_max[5] = ZYNQ_GPIO_BANK5_PIN_MAX(MP),
+};
+
+static const struct zynq_platform_data zynq_gpio_def = {
+ .label = "zynq_gpio",
+ .ngpio = ZYNQ_GPIO_NR_GPIOS,
+ .max_bank = ZYNQ_GPIO_MAX_BANK,
+ .bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(),
+ .bank_max[0] = ZYNQ_GPIO_BANK0_PIN_MAX(),
+ .bank_min[1] = ZYNQ_GPIO_BANK1_PIN_MIN(),
+ .bank_max[1] = ZYNQ_GPIO_BANK1_PIN_MAX(),
+ .bank_min[2] = ZYNQ_GPIO_BANK2_PIN_MIN(),
+ .bank_max[2] = ZYNQ_GPIO_BANK2_PIN_MAX(),
+ .bank_min[3] = ZYNQ_GPIO_BANK3_PIN_MIN(),
+ .bank_max[3] = ZYNQ_GPIO_BANK3_PIN_MAX(),
+};
+
+static const struct of_device_id zynq_gpio_of_match[] = {
+ { .compatible = "xlnx,zynq-gpio-1.0", .data = (void *)&zynq_gpio_def },
+ { .compatible = "xlnx,zynqmp-gpio-1.0",
+ .data = (void *)&zynqmp_gpio_def },
+ { /* end of table */ }
+};
+MODULE_DEVICE_TABLE(of, zynq_gpio_of_match);
+
/**
* zynq_gpio_probe - Initialization method for a zynq_gpio device
* @pdev: platform device instance
@@ -599,11 +657,18 @@ static int zynq_gpio_probe(struct platform_device *pdev)
struct zynq_gpio *gpio;
struct gpio_chip *chip;
struct resource *res;
+ const struct of_device_id *match;
gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
if (!gpio)
return -ENOMEM;
+ match = of_match_node(zynq_gpio_of_match, pdev->dev.of_node);
+ if (!match) {
+ dev_err(&pdev->dev, "of_match_node() failed\n");
+ return -EINVAL;
+ }
+ gpio->p_data = match->data;
platform_set_drvdata(pdev, gpio);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -619,7 +684,7 @@ static int zynq_gpio_probe(struct platform_device *pdev)
/* configure the gpio chip */
chip = &gpio->chip;
- chip->label = "zynq_gpio";
+ chip->label = gpio->p_data->label;
chip->owner = THIS_MODULE;
chip->dev = &pdev->dev;
chip->get = zynq_gpio_get_value;
@@ -629,7 +694,7 @@ static int zynq_gpio_probe(struct platform_device *pdev)
chip->direction_input = zynq_gpio_dir_in;
chip->direction_output = zynq_gpio_dir_out;
chip->base = -1;
- chip->ngpio = ZYNQ_GPIO_NR_GPIOS;
+ chip->ngpio = gpio->p_data->ngpio;
/* Enable GPIO clock */
gpio->clk = devm_clk_get(&pdev->dev, NULL);
@@ -651,7 +716,7 @@ static int zynq_gpio_probe(struct platform_device *pdev)
}
/* disable interrupts for all banks */
- for (bank_num = 0; bank_num < ZYNQ_GPIO_MAX_BANK; bank_num++)
+ for (bank_num = 0; bank_num < gpio->p_data->max_bank; bank_num++)
writel_relaxed(ZYNQ_GPIO_IXR_DISABLE_ALL, gpio->base_addr +
ZYNQ_GPIO_INTDIS_OFFSET(bank_num));
@@ -695,12 +760,6 @@ static int zynq_gpio_remove(struct platform_device *pdev)
return 0;
}
-static struct of_device_id zynq_gpio_of_match[] = {
- { .compatible = "xlnx,zynq-gpio-1.0", },
- { /* end of table */ }
-};
-MODULE_DEVICE_TABLE(of, zynq_gpio_of_match);
-
static struct platform_driver zynq_gpio_driver = {
.driver = {
.name = DRIVER_NAME,
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 725d16138b74..533fe5dbe6f8 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -114,10 +114,11 @@ static inline int acpi_gpiochip_pin_to_gpio_offset(struct gpio_chip *chip,
* @path: ACPI GPIO controller full path name, (e.g. "\\_SB.GPO1")
* @pin: ACPI GPIO pin number (0-based, controller-relative)
*
- * Returns GPIO descriptor to use with Linux generic GPIO API, or ERR_PTR
- * error value
+ * Return: GPIO descriptor to use with Linux generic GPIO API, or ERR_PTR
+ * error value. Specifically returns %-EPROBE_DEFER if the referenced GPIO
+ * controller does not have gpiochip registered at the moment. This is to
+ * support probe deferral.
*/
-
static struct gpio_desc *acpi_get_gpiod(char *path, int pin)
{
struct gpio_chip *chip;
@@ -131,7 +132,7 @@ static struct gpio_desc *acpi_get_gpiod(char *path, int pin)
chip = gpiochip_find(handle, acpi_gpiochip_find);
if (!chip)
- return ERR_PTR(-ENODEV);
+ return ERR_PTR(-EPROBE_DEFER);
offset = acpi_gpiochip_pin_to_gpio_offset(chip, pin);
if (offset < 0)
@@ -307,6 +308,7 @@ void acpi_gpiochip_request_interrupts(struct gpio_chip *chip)
acpi_walk_resources(handle, "_AEI",
acpi_gpiochip_request_interrupt, acpi_gpio);
}
+EXPORT_SYMBOL_GPL(acpi_gpiochip_request_interrupts);
/**
* acpi_gpiochip_free_interrupts() - Free GPIO ACPI event interrupts.
@@ -346,6 +348,7 @@ void acpi_gpiochip_free_interrupts(struct gpio_chip *chip)
kfree(event);
}
}
+EXPORT_SYMBOL_GPL(acpi_gpiochip_free_interrupts);
int acpi_dev_add_driver_gpios(struct acpi_device *adev,
const struct acpi_gpio_mapping *gpios)
@@ -514,6 +517,35 @@ struct gpio_desc *acpi_get_gpiod_by_index(struct acpi_device *adev,
return lookup.desc ? lookup.desc : ERR_PTR(-ENOENT);
}
+/**
+ * acpi_dev_gpio_irq_get() - Find GpioInt and translate it to Linux IRQ number
+ * @adev: pointer to a ACPI device to get IRQ from
+ * @index: index of GpioInt resource (starting from %0)
+ *
+ * If the device has one or more GpioInt resources, this function can be
+ * used to translate from the GPIO offset in the resource to the Linux IRQ
+ * number.
+ *
+ * Return: Linux IRQ number (>%0) on success, negative errno on failure.
+ */
+int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index)
+{
+ int idx, i;
+
+ for (i = 0, idx = 0; idx <= index; i++) {
+ struct acpi_gpio_info info;
+ struct gpio_desc *desc;
+
+ desc = acpi_get_gpiod_by_index(adev, NULL, i, &info);
+ if (IS_ERR(desc))
+ break;
+ if (info.gpioint && idx++ == index)
+ return gpiod_to_irq(desc);
+ }
+ return -ENOENT;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_gpio_irq_get);
+
static acpi_status
acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
u32 bits, u64 *value, void *handler_context,
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index a6c67c6b4680..9a0ec48a4737 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -242,7 +242,7 @@ int of_gpio_simple_xlate(struct gpio_chip *gc,
{
/*
* We're discouraging gpio_cells < 2, since that way you'll have to
- * write your own xlate function (that will have to retrive the GPIO
+ * write your own xlate function (that will have to retrieve the GPIO
* number and the flags from a single gpio cell -- this is possible,
* but not recommended).
*/
diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c
index af3bc7a8033b..b57ed8e55ab5 100644
--- a/drivers/gpio/gpiolib-sysfs.c
+++ b/drivers/gpio/gpiolib-sysfs.c
@@ -6,14 +6,29 @@
#include <linux/gpio/driver.h>
#include <linux/interrupt.h>
#include <linux/kdev_t.h>
+#include <linux/slab.h>
#include "gpiolib.h"
-static DEFINE_IDR(dirent_idr);
+#define GPIO_IRQF_TRIGGER_FALLING BIT(0)
+#define GPIO_IRQF_TRIGGER_RISING BIT(1)
+#define GPIO_IRQF_TRIGGER_BOTH (GPIO_IRQF_TRIGGER_FALLING | \
+ GPIO_IRQF_TRIGGER_RISING)
+struct gpiod_data {
+ struct gpio_desc *desc;
+
+ struct mutex mutex;
+ struct kernfs_node *value_kn;
+ int irq;
+ unsigned char irq_flags;
-/* lock protects against unexport_gpio() being called while
- * sysfs files are active.
+ bool direction_can_change;
+};
+
+/*
+ * Lock to serialise gpiod export and unexport, and prevent re-export of
+ * gpiod whose chip is being unregistered.
*/
static DEFINE_MUTEX(sysfs_lock);
@@ -38,38 +53,35 @@ static DEFINE_MUTEX(sysfs_lock);
* /edge configuration
*/
-static ssize_t gpio_direction_show(struct device *dev,
+static ssize_t direction_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct gpio_desc *desc = dev_get_drvdata(dev);
+ struct gpiod_data *data = dev_get_drvdata(dev);
+ struct gpio_desc *desc = data->desc;
ssize_t status;
- mutex_lock(&sysfs_lock);
+ mutex_lock(&data->mutex);
- if (!test_bit(FLAG_EXPORT, &desc->flags)) {
- status = -EIO;
- } else {
- gpiod_get_direction(desc);
- status = sprintf(buf, "%s\n",
+ gpiod_get_direction(desc);
+ status = sprintf(buf, "%s\n",
test_bit(FLAG_IS_OUT, &desc->flags)
? "out" : "in");
- }
- mutex_unlock(&sysfs_lock);
+ mutex_unlock(&data->mutex);
+
return status;
}
-static ssize_t gpio_direction_store(struct device *dev,
+static ssize_t direction_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
- struct gpio_desc *desc = dev_get_drvdata(dev);
+ struct gpiod_data *data = dev_get_drvdata(dev);
+ struct gpio_desc *desc = data->desc;
ssize_t status;
- mutex_lock(&sysfs_lock);
+ mutex_lock(&data->mutex);
- if (!test_bit(FLAG_EXPORT, &desc->flags))
- status = -EIO;
- else if (sysfs_streq(buf, "high"))
+ if (sysfs_streq(buf, "high"))
status = gpiod_direction_output_raw(desc, 1);
else if (sysfs_streq(buf, "out") || sysfs_streq(buf, "low"))
status = gpiod_direction_output_raw(desc, 0);
@@ -78,43 +90,40 @@ static ssize_t gpio_direction_store(struct device *dev,
else
status = -EINVAL;
- mutex_unlock(&sysfs_lock);
+ mutex_unlock(&data->mutex);
+
return status ? : size;
}
+static DEVICE_ATTR_RW(direction);
-static /* const */ DEVICE_ATTR(direction, 0644,
- gpio_direction_show, gpio_direction_store);
-
-static ssize_t gpio_value_show(struct device *dev,
+static ssize_t value_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct gpio_desc *desc = dev_get_drvdata(dev);
+ struct gpiod_data *data = dev_get_drvdata(dev);
+ struct gpio_desc *desc = data->desc;
ssize_t status;
- mutex_lock(&sysfs_lock);
+ mutex_lock(&data->mutex);
- if (!test_bit(FLAG_EXPORT, &desc->flags))
- status = -EIO;
- else
- status = sprintf(buf, "%d\n", gpiod_get_value_cansleep(desc));
+ status = sprintf(buf, "%d\n", gpiod_get_value_cansleep(desc));
+
+ mutex_unlock(&data->mutex);
- mutex_unlock(&sysfs_lock);
return status;
}
-static ssize_t gpio_value_store(struct device *dev,
+static ssize_t value_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
- struct gpio_desc *desc = dev_get_drvdata(dev);
+ struct gpiod_data *data = dev_get_drvdata(dev);
+ struct gpio_desc *desc = data->desc;
ssize_t status;
- mutex_lock(&sysfs_lock);
+ mutex_lock(&data->mutex);
- if (!test_bit(FLAG_EXPORT, &desc->flags))
- status = -EIO;
- else if (!test_bit(FLAG_IS_OUT, &desc->flags))
+ if (!test_bit(FLAG_IS_OUT, &desc->flags)) {
status = -EPERM;
- else {
+ } else {
long value;
status = kstrtol(buf, 0, &value);
@@ -124,172 +133,168 @@ static ssize_t gpio_value_store(struct device *dev,
}
}
- mutex_unlock(&sysfs_lock);
+ mutex_unlock(&data->mutex);
+
return status;
}
-
-static DEVICE_ATTR(value, 0644,
- gpio_value_show, gpio_value_store);
+static DEVICE_ATTR_RW(value);
static irqreturn_t gpio_sysfs_irq(int irq, void *priv)
{
- struct kernfs_node *value_sd = priv;
+ struct gpiod_data *data = priv;
+
+ sysfs_notify_dirent(data->value_kn);
- sysfs_notify_dirent(value_sd);
return IRQ_HANDLED;
}
-static int gpio_setup_irq(struct gpio_desc *desc, struct device *dev,
- unsigned long gpio_flags)
+/* Caller holds gpiod-data mutex. */
+static int gpio_sysfs_request_irq(struct device *dev, unsigned char flags)
{
- struct kernfs_node *value_sd;
+ struct gpiod_data *data = dev_get_drvdata(dev);
+ struct gpio_desc *desc = data->desc;
unsigned long irq_flags;
- int ret, irq, id;
+ int ret;
- if ((desc->flags & GPIO_TRIGGER_MASK) == gpio_flags)
- return 0;
-
- irq = gpiod_to_irq(desc);
- if (irq < 0)
+ data->irq = gpiod_to_irq(desc);
+ if (data->irq < 0)
return -EIO;
- id = desc->flags >> ID_SHIFT;
- value_sd = idr_find(&dirent_idr, id);
- if (value_sd)
- free_irq(irq, value_sd);
-
- desc->flags &= ~GPIO_TRIGGER_MASK;
-
- if (!gpio_flags) {
- gpiochip_unlock_as_irq(desc->chip, gpio_chip_hwgpio(desc));
- ret = 0;
- goto free_id;
- }
+ data->value_kn = sysfs_get_dirent(dev->kobj.sd, "value");
+ if (!data->value_kn)
+ return -ENODEV;
irq_flags = IRQF_SHARED;
- if (test_bit(FLAG_TRIG_FALL, &gpio_flags))
+ if (flags & GPIO_IRQF_TRIGGER_FALLING)
irq_flags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING;
- if (test_bit(FLAG_TRIG_RISE, &gpio_flags))
+ if (flags & GPIO_IRQF_TRIGGER_RISING)
irq_flags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
- if (!value_sd) {
- value_sd = sysfs_get_dirent(dev->kobj.sd, "value");
- if (!value_sd) {
- ret = -ENODEV;
- goto err_out;
- }
-
- ret = idr_alloc(&dirent_idr, value_sd, 1, 0, GFP_KERNEL);
- if (ret < 0)
- goto free_sd;
- id = ret;
-
- desc->flags &= GPIO_FLAGS_MASK;
- desc->flags |= (unsigned long)id << ID_SHIFT;
-
- if (desc->flags >> ID_SHIFT != id) {
- ret = -ERANGE;
- goto free_id;
- }
- }
+ /*
+ * FIXME: This should be done in the irq_request_resources callback
+ * when the irq is requested, but a few drivers currently fail
+ * to do so.
+ *
+ * Remove this redundant call (along with the corresponding
+ * unlock) when those drivers have been fixed.
+ */
+ ret = gpiochip_lock_as_irq(desc->chip, gpio_chip_hwgpio(desc));
+ if (ret < 0)
+ goto err_put_kn;
- ret = request_any_context_irq(irq, gpio_sysfs_irq, irq_flags,
- "gpiolib", value_sd);
+ ret = request_any_context_irq(data->irq, gpio_sysfs_irq, irq_flags,
+ "gpiolib", data);
if (ret < 0)
- goto free_id;
+ goto err_unlock;
- ret = gpiochip_lock_as_irq(desc->chip, gpio_chip_hwgpio(desc));
- if (ret < 0) {
- gpiod_warn(desc, "failed to flag the GPIO for IRQ\n");
- goto free_id;
- }
+ data->irq_flags = flags;
- desc->flags |= gpio_flags;
return 0;
-free_id:
- idr_remove(&dirent_idr, id);
- desc->flags &= GPIO_FLAGS_MASK;
-free_sd:
- if (value_sd)
- sysfs_put(value_sd);
-err_out:
+err_unlock:
+ gpiochip_unlock_as_irq(desc->chip, gpio_chip_hwgpio(desc));
+err_put_kn:
+ sysfs_put(data->value_kn);
+
return ret;
}
+/*
+ * Caller holds gpiod-data mutex (unless called after class-device
+ * deregistration).
+ */
+static void gpio_sysfs_free_irq(struct device *dev)
+{
+ struct gpiod_data *data = dev_get_drvdata(dev);
+ struct gpio_desc *desc = data->desc;
+
+ data->irq_flags = 0;
+ free_irq(data->irq, data);
+ gpiochip_unlock_as_irq(desc->chip, gpio_chip_hwgpio(desc));
+ sysfs_put(data->value_kn);
+}
+
static const struct {
const char *name;
- unsigned long flags;
+ unsigned char flags;
} trigger_types[] = {
{ "none", 0 },
- { "falling", BIT(FLAG_TRIG_FALL) },
- { "rising", BIT(FLAG_TRIG_RISE) },
- { "both", BIT(FLAG_TRIG_FALL) | BIT(FLAG_TRIG_RISE) },
+ { "falling", GPIO_IRQF_TRIGGER_FALLING },
+ { "rising", GPIO_IRQF_TRIGGER_RISING },
+ { "both", GPIO_IRQF_TRIGGER_BOTH },
};
-static ssize_t gpio_edge_show(struct device *dev,
+static ssize_t edge_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- const struct gpio_desc *desc = dev_get_drvdata(dev);
- ssize_t status;
+ struct gpiod_data *data = dev_get_drvdata(dev);
+ ssize_t status = 0;
+ int i;
- mutex_lock(&sysfs_lock);
-
- if (!test_bit(FLAG_EXPORT, &desc->flags))
- status = -EIO;
- else {
- int i;
+ mutex_lock(&data->mutex);
- status = 0;
- for (i = 0; i < ARRAY_SIZE(trigger_types); i++)
- if ((desc->flags & GPIO_TRIGGER_MASK)
- == trigger_types[i].flags) {
- status = sprintf(buf, "%s\n",
- trigger_types[i].name);
- break;
- }
+ for (i = 0; i < ARRAY_SIZE(trigger_types); i++) {
+ if (data->irq_flags == trigger_types[i].flags) {
+ status = sprintf(buf, "%s\n", trigger_types[i].name);
+ break;
+ }
}
- mutex_unlock(&sysfs_lock);
+ mutex_unlock(&data->mutex);
+
return status;
}
-static ssize_t gpio_edge_store(struct device *dev,
+static ssize_t edge_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
- struct gpio_desc *desc = dev_get_drvdata(dev);
- ssize_t status;
- int i;
+ struct gpiod_data *data = dev_get_drvdata(dev);
+ unsigned char flags;
+ ssize_t status = size;
+ int i;
- for (i = 0; i < ARRAY_SIZE(trigger_types); i++)
+ for (i = 0; i < ARRAY_SIZE(trigger_types); i++) {
if (sysfs_streq(trigger_types[i].name, buf))
- goto found;
- return -EINVAL;
+ break;
+ }
-found:
- mutex_lock(&sysfs_lock);
+ if (i == ARRAY_SIZE(trigger_types))
+ return -EINVAL;
- if (!test_bit(FLAG_EXPORT, &desc->flags))
- status = -EIO;
- else {
- status = gpio_setup_irq(desc, dev, trigger_types[i].flags);
+ flags = trigger_types[i].flags;
+
+ mutex_lock(&data->mutex);
+
+ if (flags == data->irq_flags) {
+ status = size;
+ goto out_unlock;
+ }
+
+ if (data->irq_flags)
+ gpio_sysfs_free_irq(dev);
+
+ if (flags) {
+ status = gpio_sysfs_request_irq(dev, flags);
if (!status)
status = size;
}
- mutex_unlock(&sysfs_lock);
+out_unlock:
+ mutex_unlock(&data->mutex);
return status;
}
+static DEVICE_ATTR_RW(edge);
-static DEVICE_ATTR(edge, 0644, gpio_edge_show, gpio_edge_store);
-
-static int sysfs_set_active_low(struct gpio_desc *desc, struct device *dev,
- int value)
+/* Caller holds gpiod-data mutex. */
+static int gpio_sysfs_set_active_low(struct device *dev, int value)
{
+ struct gpiod_data *data = dev_get_drvdata(dev);
+ struct gpio_desc *desc = data->desc;
int status = 0;
+ unsigned int flags = data->irq_flags;
if (!!test_bit(FLAG_ACTIVE_LOW, &desc->flags) == !!value)
return 0;
@@ -300,69 +305,59 @@ static int sysfs_set_active_low(struct gpio_desc *desc, struct device *dev,
clear_bit(FLAG_ACTIVE_LOW, &desc->flags);
/* reconfigure poll(2) support if enabled on one edge only */
- if (dev != NULL && (!!test_bit(FLAG_TRIG_RISE, &desc->flags) ^
- !!test_bit(FLAG_TRIG_FALL, &desc->flags))) {
- unsigned long trigger_flags = desc->flags & GPIO_TRIGGER_MASK;
-
- gpio_setup_irq(desc, dev, 0);
- status = gpio_setup_irq(desc, dev, trigger_flags);
+ if (flags == GPIO_IRQF_TRIGGER_FALLING ||
+ flags == GPIO_IRQF_TRIGGER_RISING) {
+ gpio_sysfs_free_irq(dev);
+ status = gpio_sysfs_request_irq(dev, flags);
}
return status;
}
-static ssize_t gpio_active_low_show(struct device *dev,
+static ssize_t active_low_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- const struct gpio_desc *desc = dev_get_drvdata(dev);
+ struct gpiod_data *data = dev_get_drvdata(dev);
+ struct gpio_desc *desc = data->desc;
ssize_t status;
- mutex_lock(&sysfs_lock);
+ mutex_lock(&data->mutex);
- if (!test_bit(FLAG_EXPORT, &desc->flags))
- status = -EIO;
- else
- status = sprintf(buf, "%d\n",
+ status = sprintf(buf, "%d\n",
!!test_bit(FLAG_ACTIVE_LOW, &desc->flags));
- mutex_unlock(&sysfs_lock);
+ mutex_unlock(&data->mutex);
return status;
}
-static ssize_t gpio_active_low_store(struct device *dev,
+static ssize_t active_low_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
- struct gpio_desc *desc = dev_get_drvdata(dev);
+ struct gpiod_data *data = dev_get_drvdata(dev);
ssize_t status;
+ long value;
- mutex_lock(&sysfs_lock);
+ mutex_lock(&data->mutex);
- if (!test_bit(FLAG_EXPORT, &desc->flags)) {
- status = -EIO;
- } else {
- long value;
+ status = kstrtol(buf, 0, &value);
+ if (status == 0)
+ status = gpio_sysfs_set_active_low(dev, value);
- status = kstrtol(buf, 0, &value);
- if (status == 0)
- status = sysfs_set_active_low(desc, dev, value != 0);
- }
-
- mutex_unlock(&sysfs_lock);
+ mutex_unlock(&data->mutex);
return status ? : size;
}
-
-static DEVICE_ATTR(active_low, 0644,
- gpio_active_low_show, gpio_active_low_store);
+static DEVICE_ATTR_RW(active_low);
static umode_t gpio_is_visible(struct kobject *kobj, struct attribute *attr,
int n)
{
struct device *dev = container_of(kobj, struct device, kobj);
- struct gpio_desc *desc = dev_get_drvdata(dev);
+ struct gpiod_data *data = dev_get_drvdata(dev);
+ struct gpio_desc *desc = data->desc;
umode_t mode = attr->mode;
- bool show_direction = test_bit(FLAG_SYSFS_DIR, &desc->flags);
+ bool show_direction = data->direction_can_change;
if (attr == &dev_attr_direction.attr) {
if (!show_direction)
@@ -402,32 +397,32 @@ static const struct attribute_group *gpio_groups[] = {
* /ngpio ... matching gpio_chip.ngpio
*/
-static ssize_t chip_base_show(struct device *dev,
+static ssize_t base_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
const struct gpio_chip *chip = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", chip->base);
}
-static DEVICE_ATTR(base, 0444, chip_base_show, NULL);
+static DEVICE_ATTR_RO(base);
-static ssize_t chip_label_show(struct device *dev,
+static ssize_t label_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
const struct gpio_chip *chip = dev_get_drvdata(dev);
return sprintf(buf, "%s\n", chip->label ? : "");
}
-static DEVICE_ATTR(label, 0444, chip_label_show, NULL);
+static DEVICE_ATTR_RO(label);
-static ssize_t chip_ngpio_show(struct device *dev,
+static ssize_t ngpio_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
const struct gpio_chip *chip = dev_get_drvdata(dev);
return sprintf(buf, "%u\n", chip->ngpio);
}
-static DEVICE_ATTR(ngpio, 0444, chip_ngpio_show, NULL);
+static DEVICE_ATTR_RO(ngpio);
static struct attribute *gpiochip_attrs[] = {
&dev_attr_base.attr,
@@ -552,6 +547,7 @@ static struct class gpio_class = {
int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
{
struct gpio_chip *chip;
+ struct gpiod_data *data;
unsigned long flags;
int status;
const char *ioname = NULL;
@@ -574,9 +570,9 @@ int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
mutex_lock(&sysfs_lock);
/* check if chip is being removed */
- if (!chip || !chip->exported) {
+ if (!chip || !chip->cdev) {
status = -ENODEV;
- goto fail_unlock;
+ goto err_unlock;
}
spin_lock_irqsave(&gpio_lock, flags);
@@ -588,43 +584,54 @@ int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
test_bit(FLAG_REQUESTED, &desc->flags),
test_bit(FLAG_EXPORT, &desc->flags));
status = -EPERM;
- goto fail_unlock;
+ goto err_unlock;
}
+ spin_unlock_irqrestore(&gpio_lock, flags);
- if (desc->chip->direction_input && desc->chip->direction_output &&
- direction_may_change) {
- set_bit(FLAG_SYSFS_DIR, &desc->flags);
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ status = -ENOMEM;
+ goto err_unlock;
}
- spin_unlock_irqrestore(&gpio_lock, flags);
+ data->desc = desc;
+ mutex_init(&data->mutex);
+ if (chip->direction_input && chip->direction_output)
+ data->direction_can_change = direction_may_change;
+ else
+ data->direction_can_change = false;
offset = gpio_chip_hwgpio(desc);
- if (desc->chip->names && desc->chip->names[offset])
- ioname = desc->chip->names[offset];
+ if (chip->names && chip->names[offset])
+ ioname = chip->names[offset];
- dev = device_create_with_groups(&gpio_class, desc->chip->dev,
- MKDEV(0, 0), desc, gpio_groups,
+ dev = device_create_with_groups(&gpio_class, chip->dev,
+ MKDEV(0, 0), data, gpio_groups,
ioname ? ioname : "gpio%u",
desc_to_gpio(desc));
if (IS_ERR(dev)) {
status = PTR_ERR(dev);
- goto fail_unlock;
+ goto err_free_data;
}
set_bit(FLAG_EXPORT, &desc->flags);
mutex_unlock(&sysfs_lock);
return 0;
-fail_unlock:
+err_free_data:
+ kfree(data);
+err_unlock:
mutex_unlock(&sysfs_lock);
gpiod_dbg(desc, "%s: status %d\n", __func__, status);
return status;
}
EXPORT_SYMBOL_GPL(gpiod_export);
-static int match_export(struct device *dev, const void *data)
+static int match_export(struct device *dev, const void *desc)
{
- return dev_get_drvdata(dev) == data;
+ struct gpiod_data *data = dev_get_drvdata(dev);
+
+ return data->desc == desc;
}
/**
@@ -641,82 +648,26 @@ static int match_export(struct device *dev, const void *data)
int gpiod_export_link(struct device *dev, const char *name,
struct gpio_desc *desc)
{
- int status = -EINVAL;
+ struct device *cdev;
+ int ret;
if (!desc) {
pr_warn("%s: invalid GPIO\n", __func__);
return -EINVAL;
}
- mutex_lock(&sysfs_lock);
-
- if (test_bit(FLAG_EXPORT, &desc->flags)) {
- struct device *tdev;
-
- tdev = class_find_device(&gpio_class, NULL, desc, match_export);
- if (tdev != NULL) {
- status = sysfs_create_link(&dev->kobj, &tdev->kobj,
- name);
- put_device(tdev);
- } else {
- status = -ENODEV;
- }
- }
-
- mutex_unlock(&sysfs_lock);
+ cdev = class_find_device(&gpio_class, NULL, desc, match_export);
+ if (!cdev)
+ return -ENODEV;
- if (status)
- gpiod_dbg(desc, "%s: status %d\n", __func__, status);
+ ret = sysfs_create_link(&dev->kobj, &cdev->kobj, name);
+ put_device(cdev);
- return status;
+ return ret;
}
EXPORT_SYMBOL_GPL(gpiod_export_link);
/**
- * gpiod_sysfs_set_active_low - set the polarity of gpio sysfs value
- * @gpio: gpio to change
- * @value: non-zero to use active low, i.e. inverted values
- *
- * Set the polarity of /sys/class/gpio/gpioN/value sysfs attribute.
- * The GPIO does not have to be exported yet. If poll(2) support has
- * been enabled for either rising or falling edge, it will be
- * reconfigured to follow the new polarity.
- *
- * Returns zero on success, else an error.
- */
-int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value)
-{
- struct device *dev = NULL;
- int status = -EINVAL;
-
- if (!desc) {
- pr_warn("%s: invalid GPIO\n", __func__);
- return -EINVAL;
- }
-
- mutex_lock(&sysfs_lock);
-
- if (test_bit(FLAG_EXPORT, &desc->flags)) {
- dev = class_find_device(&gpio_class, NULL, desc, match_export);
- if (dev == NULL) {
- status = -ENODEV;
- goto unlock;
- }
- }
-
- status = sysfs_set_active_low(desc, dev, value);
- put_device(dev);
-unlock:
- mutex_unlock(&sysfs_lock);
-
- if (status)
- gpiod_dbg(desc, "%s: status %d\n", __func__, status);
-
- return status;
-}
-EXPORT_SYMBOL_GPL(gpiod_sysfs_set_active_low);
-
-/**
* gpiod_unexport - reverse effect of gpio_export()
* @gpio: gpio to make unavailable
*
@@ -724,8 +675,8 @@ EXPORT_SYMBOL_GPL(gpiod_sysfs_set_active_low);
*/
void gpiod_unexport(struct gpio_desc *desc)
{
- int status = 0;
- struct device *dev = NULL;
+ struct gpiod_data *data;
+ struct device *dev;
if (!desc) {
pr_warn("%s: invalid GPIO\n", __func__);
@@ -734,82 +685,79 @@ void gpiod_unexport(struct gpio_desc *desc)
mutex_lock(&sysfs_lock);
- if (test_bit(FLAG_EXPORT, &desc->flags)) {
+ if (!test_bit(FLAG_EXPORT, &desc->flags))
+ goto err_unlock;
- dev = class_find_device(&gpio_class, NULL, desc, match_export);
- if (dev) {
- gpio_setup_irq(desc, dev, 0);
- clear_bit(FLAG_SYSFS_DIR, &desc->flags);
- clear_bit(FLAG_EXPORT, &desc->flags);
- } else
- status = -ENODEV;
- }
+ dev = class_find_device(&gpio_class, NULL, desc, match_export);
+ if (!dev)
+ goto err_unlock;
+
+ data = dev_get_drvdata(dev);
+
+ clear_bit(FLAG_EXPORT, &desc->flags);
+
+ device_unregister(dev);
+
+ /*
+ * Release irq after deregistration to prevent race with edge_store.
+ */
+ if (data->irq_flags)
+ gpio_sysfs_free_irq(dev);
mutex_unlock(&sysfs_lock);
- if (dev) {
- device_unregister(dev);
- put_device(dev);
- }
+ put_device(dev);
+ kfree(data);
- if (status)
- gpiod_dbg(desc, "%s: status %d\n", __func__, status);
+ return;
+
+err_unlock:
+ mutex_unlock(&sysfs_lock);
}
EXPORT_SYMBOL_GPL(gpiod_unexport);
-int gpiochip_export(struct gpio_chip *chip)
+int gpiochip_sysfs_register(struct gpio_chip *chip)
{
- int status;
struct device *dev;
- /* Many systems register gpio chips for SOC support very early,
+ /*
+ * Many systems add gpio chips for SOC support very early,
* before driver model support is available. In those cases we
- * export this later, in gpiolib_sysfs_init() ... here we just
+ * register later, in gpiolib_sysfs_init() ... here we just
* verify that _some_ field of gpio_class got initialized.
*/
if (!gpio_class.p)
return 0;
/* use chip->base for the ID; it's already known to be unique */
- mutex_lock(&sysfs_lock);
dev = device_create_with_groups(&gpio_class, chip->dev, MKDEV(0, 0),
chip, gpiochip_groups,
"gpiochip%d", chip->base);
if (IS_ERR(dev))
- status = PTR_ERR(dev);
- else
- status = 0;
- chip->exported = (status == 0);
- mutex_unlock(&sysfs_lock);
+ return PTR_ERR(dev);
- if (status)
- chip_dbg(chip, "%s: status %d\n", __func__, status);
+ mutex_lock(&sysfs_lock);
+ chip->cdev = dev;
+ mutex_unlock(&sysfs_lock);
- return status;
+ return 0;
}
-void gpiochip_unexport(struct gpio_chip *chip)
+void gpiochip_sysfs_unregister(struct gpio_chip *chip)
{
- int status;
- struct device *dev;
struct gpio_desc *desc;
unsigned int i;
+ if (!chip->cdev)
+ return;
+
+ device_unregister(chip->cdev);
+
+ /* prevent further gpiod exports */
mutex_lock(&sysfs_lock);
- dev = class_find_device(&gpio_class, NULL, chip, match_export);
- if (dev) {
- put_device(dev);
- device_unregister(dev);
- /* prevent further gpiod exports */
- chip->exported = false;
- status = 0;
- } else
- status = -ENODEV;
+ chip->cdev = NULL;
mutex_unlock(&sysfs_lock);
- if (status)
- chip_dbg(chip, "%s: status %d\n", __func__, status);
-
/* unregister gpiod class devices owned by sysfs */
for (i = 0; i < chip->ngpio; i++) {
desc = &chip->desc[i];
@@ -836,19 +784,20 @@ static int __init gpiolib_sysfs_init(void)
*/
spin_lock_irqsave(&gpio_lock, flags);
list_for_each_entry(chip, &gpio_chips, list) {
- if (chip->exported)
+ if (chip->cdev)
continue;
/*
- * TODO we yield gpio_lock here because gpiochip_export()
- * acquires a mutex. This is unsafe and needs to be fixed.
+ * TODO we yield gpio_lock here because
+ * gpiochip_sysfs_register() acquires a mutex. This is unsafe
+ * and needs to be fixed.
*
* Also it would be nice to use gpiochip_find() here so we
* can keep gpio_chips local to gpiolib.c, but the yield of
* gpio_lock prevents us from doing this.
*/
spin_unlock_irqrestore(&gpio_lock, flags);
- status = gpiochip_export(chip);
+ status = gpiochip_sysfs_register(chip);
spin_lock_irqsave(&gpio_lock, flags);
}
spin_unlock_irqrestore(&gpio_lock, flags);
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 6bc612b8a49f..be42ab368a80 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -290,7 +290,7 @@ int gpiochip_add(struct gpio_chip *chip)
of_gpiochip_add(chip);
acpi_gpiochip_add(chip);
- status = gpiochip_export(chip);
+ status = gpiochip_sysfs_register(chip);
if (status)
goto err_remove_chip;
@@ -327,10 +327,12 @@ EXPORT_SYMBOL_GPL(gpiochip_add);
*/
void gpiochip_remove(struct gpio_chip *chip)
{
+ struct gpio_desc *desc;
unsigned long flags;
unsigned id;
+ bool requested = false;
- gpiochip_unexport(chip);
+ gpiochip_sysfs_unregister(chip);
gpiochip_irqchip_remove(chip);
@@ -341,15 +343,17 @@ void gpiochip_remove(struct gpio_chip *chip)
spin_lock_irqsave(&gpio_lock, flags);
for (id = 0; id < chip->ngpio; id++) {
- if (test_bit(FLAG_REQUESTED, &chip->desc[id].flags))
- dev_crit(chip->dev, "REMOVING GPIOCHIP WITH GPIOS STILL REQUESTED\n");
+ desc = &chip->desc[id];
+ desc->chip = NULL;
+ if (test_bit(FLAG_REQUESTED, &desc->flags))
+ requested = true;
}
- for (id = 0; id < chip->ngpio; id++)
- chip->desc[id].chip = NULL;
-
list_del(&chip->list);
spin_unlock_irqrestore(&gpio_lock, flags);
+ if (requested)
+ dev_crit(chip->dev, "REMOVING GPIOCHIP WITH GPIOS STILL REQUESTED\n");
+
kfree(chip->desc);
chip->desc = NULL;
}
@@ -441,6 +445,8 @@ void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip,
*/
irq_set_handler_data(parent_irq, gpiochip);
irq_set_chained_handler(parent_irq, parent_handler);
+
+ gpiochip->irq_parent = parent_irq;
}
/* Set the parent IRQ for all affected IRQs */
@@ -549,6 +555,11 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip)
acpi_gpiochip_free_interrupts(gpiochip);
+ if (gpiochip->irq_parent) {
+ irq_set_chained_handler(gpiochip->irq_parent, NULL);
+ irq_set_handler_data(gpiochip->irq_parent, NULL);
+ }
+
/* Remove all IRQ mappings and delete the domain */
if (gpiochip->irqdomain) {
for (offset = 0; offset < gpiochip->ngpio; offset++)
@@ -608,7 +619,7 @@ int gpiochip_irqchip_add(struct gpio_chip *gpiochip,
of_node = gpiochip->dev->of_node;
#ifdef CONFIG_OF_GPIO
/*
- * If the gpiochip has an assigned OF node this takes precendence
+ * If the gpiochip has an assigned OF node this takes precedence
* FIXME: get rid of this and use gpiochip->dev->of_node everywhere
*/
if (gpiochip->of_node)
@@ -1211,7 +1222,7 @@ EXPORT_SYMBOL_GPL(gpiod_get_value);
/*
* _gpio_set_open_drain_value() - Set the open drain gpio's value.
* @desc: gpio descriptor whose state need to be set.
- * @value: Non-zero for setting it HIGH otherise it will set to LOW.
+ * @value: Non-zero for setting it HIGH otherwise it will set to LOW.
*/
static void _gpio_set_open_drain_value(struct gpio_desc *desc, bool value)
{
@@ -1238,7 +1249,7 @@ static void _gpio_set_open_drain_value(struct gpio_desc *desc, bool value)
/*
* _gpio_set_open_source_value() - Set the open source gpio's value.
* @desc: gpio descriptor whose state need to be set.
- * @value: Non-zero for setting it HIGH otherise it will set to LOW.
+ * @value: Non-zero for setting it HIGH otherwise it will set to LOW.
*/
static void _gpio_set_open_source_value(struct gpio_desc *desc, bool value)
{
@@ -1300,17 +1311,16 @@ static void gpio_chip_set_multiple(struct gpio_chip *chip,
continue;
}
/* set outputs if the corresponding mask bit is set */
- if (__test_and_clear_bit(i, mask)) {
+ if (__test_and_clear_bit(i, mask))
chip->set(chip, i, test_bit(i, bits));
- }
}
}
}
-static void gpiod_set_array_priv(bool raw, bool can_sleep,
- unsigned int array_size,
- struct gpio_desc **desc_array,
- int *value_array)
+static void gpiod_set_array_value_priv(bool raw, bool can_sleep,
+ unsigned int array_size,
+ struct gpio_desc **desc_array,
+ int *value_array)
{
int i = 0;
@@ -1320,9 +1330,9 @@ static void gpiod_set_array_priv(bool raw, bool can_sleep,
unsigned long bits[BITS_TO_LONGS(chip->ngpio)];
int count = 0;
- if (!can_sleep) {
+ if (!can_sleep)
WARN_ON(chip->can_sleep);
- }
+
memset(mask, 0, sizeof(mask));
do {
struct gpio_desc *desc = desc_array[i];
@@ -1337,24 +1347,22 @@ static void gpiod_set_array_priv(bool raw, bool can_sleep,
* open drain and open source outputs are set individually
*/
if (test_bit(FLAG_OPEN_DRAIN, &desc->flags)) {
- _gpio_set_open_drain_value(desc,value);
+ _gpio_set_open_drain_value(desc, value);
} else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) {
_gpio_set_open_source_value(desc, value);
} else {
__set_bit(hwgpio, mask);
- if (value) {
+ if (value)
__set_bit(hwgpio, bits);
- } else {
+ else
__clear_bit(hwgpio, bits);
- }
count++;
}
i++;
} while ((i < array_size) && (desc_array[i]->chip == chip));
/* push collected bits to outputs */
- if (count != 0) {
+ if (count != 0)
gpio_chip_set_multiple(chip, mask, bits);
- }
}
}
@@ -1403,7 +1411,7 @@ void gpiod_set_value(struct gpio_desc *desc, int value)
EXPORT_SYMBOL_GPL(gpiod_set_value);
/**
- * gpiod_set_raw_array() - assign values to an array of GPIOs
+ * gpiod_set_raw_array_value() - assign values to an array of GPIOs
* @array_size: number of elements in the descriptor / value arrays
* @desc_array: array of GPIO descriptors whose values will be assigned
* @value_array: array of values to assign
@@ -1414,17 +1422,18 @@ EXPORT_SYMBOL_GPL(gpiod_set_value);
* This function should be called from contexts where we cannot sleep, and will
* complain if the GPIO chip functions potentially sleep.
*/
-void gpiod_set_raw_array(unsigned int array_size,
+void gpiod_set_raw_array_value(unsigned int array_size,
struct gpio_desc **desc_array, int *value_array)
{
if (!desc_array)
return;
- gpiod_set_array_priv(true, false, array_size, desc_array, value_array);
+ gpiod_set_array_value_priv(true, false, array_size, desc_array,
+ value_array);
}
-EXPORT_SYMBOL_GPL(gpiod_set_raw_array);
+EXPORT_SYMBOL_GPL(gpiod_set_raw_array_value);
/**
- * gpiod_set_array() - assign values to an array of GPIOs
+ * gpiod_set_array_value() - assign values to an array of GPIOs
* @array_size: number of elements in the descriptor / value arrays
* @desc_array: array of GPIO descriptors whose values will be assigned
* @value_array: array of values to assign
@@ -1435,14 +1444,15 @@ EXPORT_SYMBOL_GPL(gpiod_set_raw_array);
* This function should be called from contexts where we cannot sleep, and will
* complain if the GPIO chip functions potentially sleep.
*/
-void gpiod_set_array(unsigned int array_size,
- struct gpio_desc **desc_array, int *value_array)
+void gpiod_set_array_value(unsigned int array_size,
+ struct gpio_desc **desc_array, int *value_array)
{
if (!desc_array)
return;
- gpiod_set_array_priv(false, false, array_size, desc_array, value_array);
+ gpiod_set_array_value_priv(false, false, array_size, desc_array,
+ value_array);
}
-EXPORT_SYMBOL_GPL(gpiod_set_array);
+EXPORT_SYMBOL_GPL(gpiod_set_array_value);
/**
* gpiod_cansleep() - report whether gpio value access may sleep
@@ -1604,7 +1614,7 @@ void gpiod_set_value_cansleep(struct gpio_desc *desc, int value)
EXPORT_SYMBOL_GPL(gpiod_set_value_cansleep);
/**
- * gpiod_set_raw_array_cansleep() - assign values to an array of GPIOs
+ * gpiod_set_raw_array_value_cansleep() - assign values to an array of GPIOs
* @array_size: number of elements in the descriptor / value arrays
* @desc_array: array of GPIO descriptors whose values will be assigned
* @value_array: array of values to assign
@@ -1614,19 +1624,20 @@ EXPORT_SYMBOL_GPL(gpiod_set_value_cansleep);
*
* This function is to be called from contexts that can sleep.
*/
-void gpiod_set_raw_array_cansleep(unsigned int array_size,
- struct gpio_desc **desc_array,
- int *value_array)
+void gpiod_set_raw_array_value_cansleep(unsigned int array_size,
+ struct gpio_desc **desc_array,
+ int *value_array)
{
might_sleep_if(extra_checks);
if (!desc_array)
return;
- gpiod_set_array_priv(true, true, array_size, desc_array, value_array);
+ gpiod_set_array_value_priv(true, true, array_size, desc_array,
+ value_array);
}
-EXPORT_SYMBOL_GPL(gpiod_set_raw_array_cansleep);
+EXPORT_SYMBOL_GPL(gpiod_set_raw_array_value_cansleep);
/**
- * gpiod_set_array_cansleep() - assign values to an array of GPIOs
+ * gpiod_set_array_value_cansleep() - assign values to an array of GPIOs
* @array_size: number of elements in the descriptor / value arrays
* @desc_array: array of GPIO descriptors whose values will be assigned
* @value_array: array of values to assign
@@ -1636,16 +1647,17 @@ EXPORT_SYMBOL_GPL(gpiod_set_raw_array_cansleep);
*
* This function is to be called from contexts that can sleep.
*/
-void gpiod_set_array_cansleep(unsigned int array_size,
- struct gpio_desc **desc_array,
- int *value_array)
+void gpiod_set_array_value_cansleep(unsigned int array_size,
+ struct gpio_desc **desc_array,
+ int *value_array)
{
might_sleep_if(extra_checks);
if (!desc_array)
return;
- gpiod_set_array_priv(false, true, array_size, desc_array, value_array);
+ gpiod_set_array_value_priv(false, true, array_size, desc_array,
+ value_array);
}
-EXPORT_SYMBOL_GPL(gpiod_set_array_cansleep);
+EXPORT_SYMBOL_GPL(gpiod_set_array_value_cansleep);
/**
* gpiod_add_lookup_table() - register GPIO device consumers
@@ -1880,7 +1892,7 @@ EXPORT_SYMBOL_GPL(gpiod_count);
*
* Return the GPIO descriptor corresponding to the function con_id of device
* dev, -ENOENT if no GPIO has been assigned to the requested function, or
- * another IS_ERR() code if an error occured while trying to acquire the GPIO.
+ * another IS_ERR() code if an error occurred while trying to acquire the GPIO.
*/
struct gpio_desc *__must_check __gpiod_get(struct device *dev, const char *con_id,
enum gpiod_flags flags)
@@ -1960,7 +1972,7 @@ static int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id,
*
* Return a valid GPIO descriptor, -ENOENT if no GPIO has been assigned to the
* requested function and/or index, or another IS_ERR() code if an error
- * occured while trying to acquire the GPIO.
+ * occurred while trying to acquire the GPIO.
*/
struct gpio_desc *__must_check __gpiod_get_index(struct device *dev,
const char *con_id,
@@ -2118,13 +2130,15 @@ int gpiod_hog(struct gpio_desc *desc, const char *name,
local_desc = gpiochip_request_own_desc(chip, hwnum, name);
if (IS_ERR(local_desc)) {
- pr_debug("requesting own GPIO %s failed\n", name);
+ pr_err("requesting hog GPIO %s (chip %s, offset %d) failed\n",
+ name, chip->label, hwnum);
return PTR_ERR(local_desc);
}
status = gpiod_configure_flags(desc, name, lflags, dflags);
if (status < 0) {
- pr_debug("setup of GPIO %s failed\n", name);
+ pr_err("setup of hog GPIO %s (chip %s, offset %d) failed\n",
+ name, chip->label, hwnum);
gpiochip_free_own_desc(desc);
return status;
}
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index 594b1798c0e7..bf343004b008 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -83,20 +83,12 @@ struct gpio_desc {
#define FLAG_IS_OUT 1
#define FLAG_EXPORT 2 /* protected by sysfs_lock */
#define FLAG_SYSFS 3 /* exported via /sys/class/gpio/control */
-#define FLAG_TRIG_FALL 4 /* trigger on falling edge */
-#define FLAG_TRIG_RISE 5 /* trigger on rising edge */
#define FLAG_ACTIVE_LOW 6 /* value has active low */
#define FLAG_OPEN_DRAIN 7 /* Gpio is open drain type */
#define FLAG_OPEN_SOURCE 8 /* Gpio is open source type */
#define FLAG_USED_AS_IRQ 9 /* GPIO is connected to an IRQ */
-#define FLAG_SYSFS_DIR 10 /* show sysfs direction attribute */
#define FLAG_IS_HOGGED 11 /* GPIO is hogged */
-#define ID_SHIFT 16 /* add new flags before this one */
-
-#define GPIO_FLAGS_MASK ((1 << ID_SHIFT) - 1)
-#define GPIO_TRIGGER_MASK (BIT(FLAG_TRIG_FALL) | BIT(FLAG_TRIG_RISE))
-
const char *label;
};
@@ -151,17 +143,17 @@ static int __maybe_unused gpio_chip_hwgpio(const struct gpio_desc *desc)
#ifdef CONFIG_GPIO_SYSFS
-int gpiochip_export(struct gpio_chip *chip);
-void gpiochip_unexport(struct gpio_chip *chip);
+int gpiochip_sysfs_register(struct gpio_chip *chip);
+void gpiochip_sysfs_unregister(struct gpio_chip *chip);
#else
-static inline int gpiochip_export(struct gpio_chip *chip)
+static inline int gpiochip_sysfs_register(struct gpio_chip *chip)
{
return 0;
}
-static inline void gpiochip_unexport(struct gpio_chip *chip)
+static inline void gpiochip_sysfs_unregister(struct gpio_chip *chip)
{
}
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 987c124432c5..fc2ee8213fb6 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -107,7 +107,7 @@ static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data)
if (sb->access_mode == ACPI_I2C_10BIT_MODE)
info->flags |= I2C_CLIENT_TEN;
}
- } else if (info->irq < 0) {
+ } else if (!info->irq) {
struct resource r;
if (acpi_dev_resource_interrupt(ares, 0, &r))
@@ -134,7 +134,6 @@ static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
memset(&info, 0, sizeof(info));
info.fwnode = acpi_fwnode_handle(adev);
- info.irq = -1;
INIT_LIST_HEAD(&resource_list);
ret = acpi_dev_get_resources(adev, &resource_list,
@@ -632,8 +631,13 @@ static int i2c_device_probe(struct device *dev)
if (!client)
return 0;
- if (!client->irq && dev->of_node) {
- int irq = of_irq_get(dev->of_node, 0);
+ if (!client->irq) {
+ int irq = -ENOENT;
+
+ if (dev->of_node)
+ irq = of_irq_get(dev->of_node, 0);
+ else if (ACPI_COMPANION(dev))
+ irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 0);
if (irq == -EPROBE_DEFER)
return irq;
diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c
index 66edd99bc302..7ddb1ab70891 100644
--- a/drivers/net/phy/mdio-mux-gpio.c
+++ b/drivers/net/phy/mdio-mux-gpio.c
@@ -35,7 +35,8 @@ static int mdio_mux_gpio_switch_fn(int current_child, int desired_child,
for (n = 0; n < s->gpios->ndescs; n++)
values[n] = (desired_child >> n) & 1;
- gpiod_set_array_cansleep(s->gpios->ndescs, s->gpios->desc, values);
+ gpiod_set_array_value_cansleep(s->gpios->ndescs, s->gpios->desc,
+ values);
return 0;
}
diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c
index 0ec756c62bcf..d7b846d41630 100644
--- a/drivers/tty/serial/serial_mctrl_gpio.c
+++ b/drivers/tty/serial/serial_mctrl_gpio.c
@@ -55,7 +55,7 @@ void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl)
value_array[count] = !!(mctrl & mctrl_gpios_desc[i].mctrl);
count++;
}
- gpiod_set_array(count, desc_array, value_array);
+ gpiod_set_array_value(count, desc_array, value_array);
}
EXPORT_SYMBOL_GPL(mctrl_gpio_set);
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 9bb0d11729c9..40ec1433f05d 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -128,11 +128,6 @@ static inline int gpio_export_link(struct device *dev, const char *name,
return gpiod_export_link(dev, name, gpio_to_desc(gpio));
}
-static inline int gpio_sysfs_set_active_low(unsigned gpio, int value)
-{
- return gpiod_sysfs_set_active_low(gpio_to_desc(gpio), value);
-}
-
static inline void gpio_unexport(unsigned gpio)
{
gpiod_unexport(gpio_to_desc(gpio));
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index e4da5e35e29c..f57c440642cd 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -721,6 +721,8 @@ static inline void acpi_dev_remove_driver_gpios(struct acpi_device *adev)
if (adev)
adev->driver_gpios = NULL;
}
+
+int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index);
#else
static inline int acpi_dev_add_driver_gpios(struct acpi_device *adev,
const struct acpi_gpio_mapping *gpios)
@@ -728,6 +730,11 @@ static inline int acpi_dev_add_driver_gpios(struct acpi_device *adev,
return -ENXIO;
}
static inline void acpi_dev_remove_driver_gpios(struct acpi_device *adev) {}
+
+static inline int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index)
+{
+ return -ENXIO;
+}
#endif
/* Device properties */
diff --git a/include/linux/basic_mmio_gpio.h b/include/linux/basic_mmio_gpio.h
index 0e97856b2cff..14eea946e640 100644
--- a/include/linux/basic_mmio_gpio.h
+++ b/include/linux/basic_mmio_gpio.h
@@ -74,5 +74,6 @@ int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
#define BGPIOF_UNREADABLE_REG_SET BIT(1) /* reg_set is unreadable */
#define BGPIOF_UNREADABLE_REG_DIR BIT(2) /* reg_dir is unreadable */
#define BGPIOF_BIG_ENDIAN_BYTE_ORDER BIT(3)
+#define BGPIOF_READ_OUTPUT_REG_SET BIT(4) /* reg_set stores output value */
#endif /* __BASIC_MMIO_GPIO_H */
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index ab81339a8590..d12b5d566e4b 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -196,13 +196,6 @@ static inline int gpio_export_link(struct device *dev, const char *name,
return -EINVAL;
}
-static inline int gpio_sysfs_set_active_low(unsigned gpio, int value)
-{
- /* GPIO can never have been requested */
- WARN_ON(1);
- return -EINVAL;
-}
-
static inline void gpio_unexport(unsigned gpio)
{
/* GPIO can never have been exported */
diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
index 3a7c9ffd5ab9..fd098169fe87 100644
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
@@ -100,24 +100,25 @@ int gpiod_direction_output_raw(struct gpio_desc *desc, int value);
/* Value get/set from non-sleeping context */
int gpiod_get_value(const struct gpio_desc *desc);
void gpiod_set_value(struct gpio_desc *desc, int value);
-void gpiod_set_array(unsigned int array_size,
- struct gpio_desc **desc_array, int *value_array);
+void gpiod_set_array_value(unsigned int array_size,
+ struct gpio_desc **desc_array, int *value_array);
int gpiod_get_raw_value(const struct gpio_desc *desc);
void gpiod_set_raw_value(struct gpio_desc *desc, int value);
-void gpiod_set_raw_array(unsigned int array_size,
- struct gpio_desc **desc_array, int *value_array);
+void gpiod_set_raw_array_value(unsigned int array_size,
+ struct gpio_desc **desc_array,
+ int *value_array);
/* Value get/set from sleeping context */
int gpiod_get_value_cansleep(const struct gpio_desc *desc);
void gpiod_set_value_cansleep(struct gpio_desc *desc, int value);
-void gpiod_set_array_cansleep(unsigned int array_size,
- struct gpio_desc **desc_array,
- int *value_array);
+void gpiod_set_array_value_cansleep(unsigned int array_size,
+ struct gpio_desc **desc_array,
+ int *value_array);
int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc);
void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value);
-void gpiod_set_raw_array_cansleep(unsigned int array_size,
- struct gpio_desc **desc_array,
- int *value_array);
+void gpiod_set_raw_array_value_cansleep(unsigned int array_size,
+ struct gpio_desc **desc_array,
+ int *value_array);
int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce);
@@ -304,9 +305,9 @@ static inline void gpiod_set_value(struct gpio_desc *desc, int value)
/* GPIO can never have been requested */
WARN_ON(1);
}
-static inline void gpiod_set_array(unsigned int array_size,
- struct gpio_desc **desc_array,
- int *value_array)
+static inline void gpiod_set_array_value(unsigned int array_size,
+ struct gpio_desc **desc_array,
+ int *value_array)
{
/* GPIO can never have been requested */
WARN_ON(1);
@@ -322,9 +323,9 @@ static inline void gpiod_set_raw_value(struct gpio_desc *desc, int value)
/* GPIO can never have been requested */
WARN_ON(1);
}
-static inline void gpiod_set_raw_array(unsigned int array_size,
- struct gpio_desc **desc_array,
- int *value_array)
+static inline void gpiod_set_raw_array_value(unsigned int array_size,
+ struct gpio_desc **desc_array,
+ int *value_array)
{
/* GPIO can never have been requested */
WARN_ON(1);
@@ -341,7 +342,7 @@ static inline void gpiod_set_value_cansleep(struct gpio_desc *desc, int value)
/* GPIO can never have been requested */
WARN_ON(1);
}
-static inline void gpiod_set_array_cansleep(unsigned int array_size,
+static inline void gpiod_set_array_value_cansleep(unsigned int array_size,
struct gpio_desc **desc_array,
int *value_array)
{
@@ -360,7 +361,7 @@ static inline void gpiod_set_raw_value_cansleep(struct gpio_desc *desc,
/* GPIO can never have been requested */
WARN_ON(1);
}
-static inline void gpiod_set_raw_array_cansleep(unsigned int array_size,
+static inline void gpiod_set_raw_array_value_cansleep(unsigned int array_size,
struct gpio_desc **desc_array,
int *value_array)
{
@@ -449,7 +450,6 @@ static inline int desc_to_gpio(const struct gpio_desc *desc)
int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
int gpiod_export_link(struct device *dev, const char *name,
struct gpio_desc *desc);
-int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value);
void gpiod_unexport(struct gpio_desc *desc);
#else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
@@ -466,11 +466,6 @@ static inline int gpiod_export_link(struct device *dev, const char *name,
return -ENOSYS;
}
-static inline int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value)
-{
- return -ENOSYS;
-}
-
static inline void gpiod_unexport(struct gpio_desc *desc)
{
}
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
index f1b36593ec9f..cc7ec129b329 100644
--- a/include/linux/gpio/driver.h
+++ b/include/linux/gpio/driver.h
@@ -20,6 +20,7 @@ struct seq_file;
* struct gpio_chip - abstract a GPIO controller
* @label: for diagnostics
* @dev: optional device providing the GPIOs
+ * @cdev: class device used by sysfs interface (may be NULL)
* @owner: helps prevent removal of modules exporting active GPIOs
* @list: links gpio_chips together for traversal
* @request: optional hook for chip-specific activation, such as
@@ -41,8 +42,12 @@ struct seq_file;
* @dbg_show: optional routine to show contents in debugfs; default code
* will be used when this is omitted, but custom code can show extra
* state (such as pullup/pulldown configuration).
- * @base: identifies the first GPIO number handled by this chip; or, if
- * negative during registration, requests dynamic ID allocation.
+ * @base: identifies the first GPIO number handled by this chip;
+ * or, if negative during registration, requests dynamic ID allocation.
+ * DEPRECATION: providing anything non-negative and nailing the base
+ * base offset of GPIO chips is deprecated. Please pass -1 as base to
+ * let gpiolib select the chip base in all possible cases. We want to
+ * get rid of the static GPIO number space in the long run.
* @ngpio: the number of GPIOs handled by this controller; the last GPIO
* handled is (base + ngpio - 1).
* @desc: array of ngpio descriptors. Private.
@@ -57,7 +62,6 @@ struct seq_file;
* implies that if the chip supports IRQs, these IRQs need to be threaded
* as the chip access may sleep when e.g. reading out the IRQ status
* registers.
- * @exported: flags if the gpiochip is exported for use from sysfs. Private.
* @irq_not_threaded: flag must be set if @can_sleep is set but the
* IRQs don't need to be threaded
*
@@ -74,6 +78,7 @@ struct seq_file;
struct gpio_chip {
const char *label;
struct device *dev;
+ struct device *cdev;
struct module *owner;
struct list_head list;
@@ -109,7 +114,6 @@ struct gpio_chip {
const char *const *names;
bool can_sleep;
bool irq_not_threaded;
- bool exported;
#ifdef CONFIG_GPIOLIB_IRQCHIP
/*
@@ -121,6 +125,7 @@ struct gpio_chip {
unsigned int irq_base;
irq_flow_handler_t irq_handler;
unsigned int irq_default_type;
+ int irq_parent;
#endif
#if defined(CONFIG_OF_GPIO)
diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h
index 5d50b25a73d7..cb2618147c34 100644
--- a/include/linux/platform_data/gpio-omap.h
+++ b/include/linux/platform_data/gpio-omap.h
@@ -208,9 +208,17 @@ struct omap_gpio_platform_data {
int (*get_context_loss_count)(struct device *dev);
};
+#if IS_BUILTIN(CONFIG_GPIO_OMAP)
extern void omap2_gpio_prepare_for_idle(int off_mode);
extern void omap2_gpio_resume_after_idle(void);
-extern void omap_set_gpio_debounce(int gpio, int enable);
-extern void omap_set_gpio_debounce_time(int gpio, int enable);
+#else
+static inline void omap2_gpio_prepare_for_idle(int off_mode)
+{
+}
+
+static inline void omap2_gpio_resume_after_idle(void)
+{
+}
+#endif
#endif