diff options
| -rw-r--r-- | arch/m68k/include/asm/m528xsim.h | 12 | ||||
| -rw-r--r-- | arch/m68knommu/platform/528x/config.c | 14 |
2 files changed, 16 insertions, 10 deletions
diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h index 014098a7de89..d7c92419f2b5 100644 --- a/arch/m68k/include/asm/m528xsim.h +++ b/arch/m68k/include/asm/m528xsim.h @@ -49,9 +49,15 @@ /* * UART module. */ -#define MCFUART_BASE1 0x200 /* Base address of UART1 */ -#define MCFUART_BASE2 0x240 /* Base address of UART2 */ -#define MCFUART_BASE3 0x280 /* Base address of UART3 */ +#define MCFUART_BASE1 (MCF_IPSBAR + 0x00000200) +#define MCFUART_BASE2 (MCF_IPSBAR + 0x00000240) +#define MCFUART_BASE3 (MCF_IPSBAR + 0x00000280) + +/* + * FEC ethernet module. + */ +#define MCFFEC_BASE (MCF_IPSBAR + 0x00001000) +#define MCFFEC_SIZE 0x800 /* * GPIO registers diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c index 76b743343bfa..ac39fc661219 100644 --- a/arch/m68knommu/platform/528x/config.c +++ b/arch/m68knommu/platform/528x/config.c @@ -29,15 +29,15 @@ static struct mcf_platform_uart m528x_uart_platform[] = { { - .mapbase = MCF_MBAR + MCFUART_BASE1, + .mapbase = MCFUART_BASE1, .irq = MCFINT_VECBASE + MCFINT_UART0, }, { - .mapbase = MCF_MBAR + MCFUART_BASE2, + .mapbase = MCFUART_BASE2, .irq = MCFINT_VECBASE + MCFINT_UART0 + 1, }, { - .mapbase = MCF_MBAR + MCFUART_BASE3, + .mapbase = MCFUART_BASE3, .irq = MCFINT_VECBASE + MCFINT_UART0 + 2, }, { }, @@ -51,8 +51,8 @@ static struct platform_device m528x_uart = { static struct resource m528x_fec_resources[] = { { - .start = MCF_MBAR + 0x1000, - .end = MCF_MBAR + 0x1000 + 0x7ff, + .start = MCFFEC_BASE, + .end = MCFFEC_BASE + MCFFEC_SIZE - 1, .flags = IORESOURCE_MEM, }, { @@ -227,9 +227,9 @@ static void __init m528x_uart_init_line(int line, int irq) /* make sure PUAPAR is set for UART0 and UART1 */ if (line < 2) { - port = readb(MCF_MBAR + MCF5282_GPIO_PUAPAR); + port = readb(MCF5282_GPIO_PUAPAR); port |= (0x03 << (line * 2)); - writeb(port, MCF_MBAR + MCF5282_GPIO_PUAPAR); + writeb(port, MCF5282_GPIO_PUAPAR); } } |