diff options
| -rw-r--r-- | Documentation/devicetree/bindings/sound/tpa6130a2.txt | 27 | ||||
| -rw-r--r-- | sound/soc/codecs/tpa6130a2.c | 32 |
2 files changed, 50 insertions, 9 deletions
diff --git a/Documentation/devicetree/bindings/sound/tpa6130a2.txt b/Documentation/devicetree/bindings/sound/tpa6130a2.txt new file mode 100644 index 000000000000..6dfa740e4b2d --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tpa6130a2.txt @@ -0,0 +1,27 @@ +Texas Instruments - tpa6130a2 Codec module + +The tpa6130a2 serial control bus communicates through I2C protocols + +Required properties: + +- compatible - "string" - One of: + "ti,tpa6130a2" - TPA6130A2 + "ti,tpa6140a2" - TPA6140A2 + + +- reg - <int> - I2C slave address + +- Vdd-supply - <phandle> - power supply regulator + +Optional properties: + +- power-gpio - gpio pin to power the device + +Example: + +tpa6130a2: tpa6130a2@60 { + compatible = "ti,tpa6130a2"; + reg = <0x60>; + Vdd-supply = <&vmmc2>; + power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; +}; diff --git a/sound/soc/codecs/tpa6130a2.c b/sound/soc/codecs/tpa6130a2.c index c58bee8346ce..998555f2a8aa 100644 --- a/sound/soc/codecs/tpa6130a2.c +++ b/sound/soc/codecs/tpa6130a2.c @@ -30,6 +30,7 @@ #include <sound/tpa6130a2-plat.h> #include <sound/soc.h> #include <sound/tlv.h> +#include <linux/of_gpio.h> #include "tpa6130a2.h" @@ -364,30 +365,33 @@ static int tpa6130a2_probe(struct i2c_client *client, { struct device *dev; struct tpa6130a2_data *data; - struct tpa6130a2_platform_data *pdata; + struct tpa6130a2_platform_data *pdata = client->dev.platform_data; + struct device_node *np = client->dev.of_node; const char *regulator; int ret; dev = &client->dev; - if (client->dev.platform_data == NULL) { - dev_err(dev, "Platform data not set\n"); - dump_stack(); - return -ENODEV; - } - data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); if (data == NULL) { dev_err(dev, "Can not allocate memory\n"); return -ENOMEM; } + if (pdata) { + data->power_gpio = pdata->power_gpio; + } else if (np) { + data->power_gpio = of_get_named_gpio(np, "power-gpio", 0); + } else { + dev_err(dev, "Platform data not set\n"); + dump_stack(); + return -ENODEV; + } + tpa6130a2_client = client; i2c_set_clientdata(tpa6130a2_client, data); - pdata = client->dev.platform_data; - data->power_gpio = pdata->power_gpio; data->id = id->driver_data; mutex_init(&data->mutex); @@ -466,10 +470,20 @@ static const struct i2c_device_id tpa6130a2_id[] = { }; MODULE_DEVICE_TABLE(i2c, tpa6130a2_id); +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id tpa6130a2_of_match[] = { + { .compatible = "ti,tpa6130a2", }, + { .compatible = "ti,tpa6140a2" }, + {}, +}; +MODULE_DEVICE_TABLE(of, tpa6130a2_of_match); +#endif + static struct i2c_driver tpa6130a2_i2c_driver = { .driver = { .name = "tpa6130a2", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(tpa6130a2_of_match), }, .probe = tpa6130a2_probe, .remove = tpa6130a2_remove, |