summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-pnx4008/serial.c2
-rw-r--r--include/asm-arm/arch-pnx4008/gpio.h102
-rw-r--r--include/asm-arm/arch-pnx4008/pm.h29
3 files changed, 103 insertions, 30 deletions
diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c
index 10322384e45d..95a1b3f964a2 100644
--- a/arch/arm/mach-pnx4008/serial.c
+++ b/arch/arm/mach-pnx4008/serial.c
@@ -20,7 +20,7 @@
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
-#include <asm/arch/pm.h>
+#include <asm/arch/gpio.h>
#include <asm/arch/clock.h>
diff --git a/include/asm-arm/arch-pnx4008/gpio.h b/include/asm-arm/arch-pnx4008/gpio.h
index 1fa5a77c3010..d01bf83d55c2 100644
--- a/include/asm-arm/arch-pnx4008/gpio.h
+++ b/include/asm-arm/arch-pnx4008/gpio.h
@@ -127,6 +127,79 @@
#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK))
#define GPIO_ISIN(K) ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK))
+/* Start Enable Pin Interrupts - table 58 page 66 */
+
+#define SE_PIN_BASE_INT 32
+
+#define SE_U7_RX_INT 63
+#define SE_U7_HCTS_INT 62
+#define SE_BT_CLKREQ_INT 61
+#define SE_U6_IRRX_INT 60
+/*59 unused*/
+#define SE_U5_RX_INT 58
+#define SE_GPI_11_INT 57
+#define SE_U3_RX_INT 56
+#define SE_U2_HCTS_INT 55
+#define SE_U2_RX_INT 54
+#define SE_U1_RX_INT 53
+#define SE_DISP_SYNC_INT 52
+/*51 unused*/
+#define SE_SDIO_INT_N 50
+#define SE_MSDIO_START_INT 49
+#define SE_GPI_06_INT 48
+#define SE_GPI_05_INT 47
+#define SE_GPI_04_INT 46
+#define SE_GPI_03_INT 45
+#define SE_GPI_02_INT 44
+#define SE_GPI_01_INT 43
+#define SE_GPI_00_INT 42
+#define SE_SYSCLKEN_PIN_INT 41
+#define SE_SPI1_DATAIN_INT 40
+#define SE_GPI_07_INT 39
+#define SE_SPI2_DATAIN_INT 38
+#define SE_GPI_10_INT 37
+#define SE_GPI_09_INT 36
+#define SE_GPI_08_INT 35
+/*34-32 unused*/
+
+/* Start Enable Internal Interrupts - table 57 page 65 */
+
+#define SE_INT_BASE_INT 0
+
+#define SE_TS_IRQ 31
+#define SE_TS_P_INT 30
+#define SE_TS_AUX_INT 29
+/*27-28 unused*/
+#define SE_USB_AHB_NEED_CLK_INT 26
+#define SE_MSTIMER_INT 25
+#define SE_RTC_INT 24
+#define SE_USB_NEED_CLK_INT 23
+#define SE_USB_INT 22
+#define SE_USB_I2C_INT 21
+#define SE_USB_OTG_TIMER_INT 20
+#define SE_USB_OTG_ATX_INT_N 19
+/*18 unused*/
+#define SE_DSP_GPIO4_INT 17
+#define SE_KEY_IRQ 16
+#define SE_DSP_SLAVEPORT_INT 15
+#define SE_DSP_GPIO1_INT 14
+#define SE_DSP_GPIO0_INT 13
+#define SE_DSP_AHB_INT 12
+/*11-6 unused*/
+#define SE_GPIO_05_INT 5
+#define SE_GPIO_04_INT 4
+#define SE_GPIO_03_INT 3
+#define SE_GPIO_02_INT 2
+#define SE_GPIO_01_INT 1
+#define SE_GPIO_00_INT 0
+
+#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
+
+#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
+
extern int pnx4008_gpio_register_pin(unsigned short pin);
extern int pnx4008_gpio_unregister_pin(unsigned short pin);
extern unsigned long pnx4008_gpio_read_pin(unsigned short pin);
@@ -136,4 +209,33 @@ extern int pnx4008_gpio_read_pin_direction(unsigned short pin);
extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output);
extern int pnx4008_gpio_read_pin_mux(unsigned short pin);
+static inline void start_int_umask(u8 irq)
+{
+ __raw_writel(__raw_readl(START_INT_ER_REG(irq)) |
+ START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
+}
+
+static inline void start_int_mask(u8 irq)
+{
+ __raw_writel(__raw_readl(START_INT_ER_REG(irq)) &
+ ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
+}
+
+static inline void start_int_ack(u8 irq)
+{
+ __raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq));
+}
+
+static inline void start_int_set_falling_edge(u8 irq)
+{
+ __raw_writel(__raw_readl(START_INT_APR_REG(irq)) &
+ ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
+}
+
+static inline void start_int_set_rising_edge(u8 irq)
+{
+ __raw_writel(__raw_readl(START_INT_APR_REG(irq)) |
+ START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
+}
+
#endif /* _PNX4008_GPIO_H_ */
diff --git a/include/asm-arm/arch-pnx4008/pm.h b/include/asm-arm/arch-pnx4008/pm.h
index c660486670fb..bac1634cb3e0 100644
--- a/include/asm-arm/arch-pnx4008/pm.h
+++ b/include/asm-arm/arch-pnx4008/pm.h
@@ -29,34 +29,5 @@ extern void pnx4008_cpu_standby(void);
extern int pnx4008_startup_pll(struct clk *);
extern int pnx4008_shutdown_pll(struct clk *);
-static inline void start_int_umask(u8 irq)
-{
- __raw_writel(__raw_readl(START_INT_ER_REG(irq)) |
- START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_mask(u8 irq)
-{
- __raw_writel(__raw_readl(START_INT_ER_REG(irq)) &
- ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_ack(u8 irq)
-{
- __raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq));
-}
-
-static inline void start_int_set_falling_edge(u8 irq)
-{
- __raw_writel(__raw_readl(START_INT_APR_REG(irq)) &
- ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-static inline void start_int_set_rising_edge(u8 irq)
-{
- __raw_writel(__raw_readl(START_INT_APR_REG(irq)) |
- START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
#endif /* ASSEMBLER */
#endif /* __ASM_ARCH_PNX4008_PM_H */