diff options
-rw-r--r-- | drivers/net/wireless/ath/ath5k/ath5k.h | 26 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath5k/phy.c | 1 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath5k/qcu.c | 4 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath5k/reset.c | 130 |
4 files changed, 134 insertions, 27 deletions
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h index b1429da41a80..c9535447a8ab 100644 --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -242,14 +242,6 @@ #define AR5K_INIT_SLG_RETRY AR5K_INIT_SSH_RETRY #define AR5K_INIT_TX_RETRY 10 -#define AR5K_INIT_TRANSMIT_LATENCY ( \ - (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ - (AR5K_INIT_USEC) \ -) -#define AR5K_INIT_TRANSMIT_LATENCY_TURBO ( \ - (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ - (AR5K_INIT_USEC_TURBO) \ -) #define AR5K_INIT_PROTO_TIME_CNTRL ( \ (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) | \ (AR5K_INIT_PROG_IFS) \ @@ -259,6 +251,24 @@ (AR5K_INIT_PROG_IFS_TURBO) \ ) +/* Rx latency for 5 and 10MHz operation (max ?) */ +#define AR5K_INIT_RX_LAT_MAX 63 +/* Tx latencies from initvals (5212 only but no problem + * because we only tweak them on 5212) */ +#define AR5K_INIT_TX_LAT_A 54 +#define AR5K_INIT_TX_LAT_BG 384 +/* Tx latency for 40MHz (turbo) operation (min ?) */ +#define AR5K_INIT_TX_LAT_MIN 32 + +/* Tx frame to Tx data start delay */ +#define AR5K_INIT_TXF2TXD_START_DEFAULT 14 +#define AR5K_INIT_TXF2TXD_START_DELAY_10MHZ 12 +#define AR5K_INIT_TXF2TXD_START_DELAY_5MHZ 13 + +/* Default Tx/Rx latencies (same for 5211)*/ +#define AR5K_INIT_TX_LATENCY_5210 54 +#define AR5K_INIT_RX_LATENCY_5210 29 + /* GENERIC CHIPSET DEFINITIONS */ diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 02869c7d596b..706fc461be61 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -1235,7 +1235,6 @@ static int ath5k_hw_channel(struct ath5k_hw *ah, } ah->ah_current_channel = channel; - ath5k_hw_set_clockrate(ah); return 0; } diff --git a/drivers/net/wireless/ath/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c index 778fb59d89f5..f89bc9403f8f 100644 --- a/drivers/net/wireless/ath/ath5k/qcu.c +++ b/drivers/net/wireless/ath/ath5k/qcu.c @@ -253,10 +253,6 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) ath5k_hw_reg_write(ah, (ah->ah_bwmode == AR5K_BWMODE_40MHZ) ? AR5K_INIT_ACK_CTS_TIMEOUT_TURBO : AR5K_INIT_ACK_CTS_TIMEOUT, AR5K_SLOT_TIME); - /* Set Transmit Latency */ - ath5k_hw_reg_write(ah, (ah->ah_bwmode == AR5K_BWMODE_40MHZ) ? - AR5K_INIT_TRANSMIT_LATENCY_TURBO : - AR5K_INIT_TRANSMIT_LATENCY, AR5K_USEC_5210); /* Set IFS0 */ if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) { diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c index 91a2b2166def..7db984ce90fb 100644 --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -86,16 +86,21 @@ unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock) } /** - * ath5k_hw_set_clockrate - Set common->clockrate for the current channel + * ath5k_hw_init_core_clock - Initialize core clock * - * @ah: The &struct ath5k_hw + * @ah The &struct ath5k_hw + * + * Initialize core clock parameters (usec, usec32, latencies etc). */ -void ath5k_hw_set_clockrate(struct ath5k_hw *ah) +static void ath5k_hw_init_core_clock(struct ath5k_hw *ah) { struct ieee80211_channel *channel = ah->ah_current_channel; struct ath_common *common = ath5k_hw_common(ah); - int clock; + u32 usec_reg, txlat, rxlat, usec, clock, sclock, txf2txs; + /* + * Set core clock frequency + */ if (channel->hw_value & CHANNEL_5GHZ) clock = 40; /* 802.11a */ else if (channel->hw_value & CHANNEL_CCK) @@ -103,11 +108,109 @@ void ath5k_hw_set_clockrate(struct ath5k_hw *ah) else clock = 44; /* 802.11g */ - /* Clock rate in turbo modes is twice the normal rate */ - if (channel->hw_value & CHANNEL_TURBO) + /* Use clock multiplier for non-default + * bwmode */ + switch (ah->ah_bwmode) { + case AR5K_BWMODE_40MHZ: clock *= 2; + break; + case AR5K_BWMODE_10MHZ: + clock /= 2; + break; + case AR5K_BWMODE_5MHZ: + clock /= 4; + break; + default: + break; + } common->clockrate = clock; + + /* + * Set USEC parameters + */ + /* Set USEC counter on PCU*/ + usec = clock - 1; + usec = AR5K_REG_SM(usec, AR5K_USEC_1); + + /* Set usec duration on DCU */ + if (ah->ah_version != AR5K_AR5210) + AR5K_REG_WRITE_BITS(ah, AR5K_DCU_GBL_IFS_MISC, + AR5K_DCU_GBL_IFS_MISC_USEC_DUR, + clock); + + /* Set 32MHz USEC counter */ + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413)) + /* Remain on 40MHz clock ? */ + sclock = 40 - 1; + else + sclock = 32 - 1; + sclock = AR5K_REG_SM(sclock, AR5K_USEC_32); + + /* + * Set tx/rx latencies + */ + usec_reg = ath5k_hw_reg_read(ah, AR5K_USEC_5211); + txlat = AR5K_REG_MS(usec_reg, AR5K_USEC_TX_LATENCY_5211); + rxlat = AR5K_REG_MS(usec_reg, AR5K_USEC_RX_LATENCY_5211); + + /* + * 5210 initvals don't include usec settings + * so we need to use magic values here for + * tx/rx latencies + */ + if (ah->ah_version == AR5K_AR5210) { + /* same for turbo */ + txlat = AR5K_INIT_TX_LATENCY_5210; + rxlat = AR5K_INIT_RX_LATENCY_5210; + } + + if (ah->ah_mac_srev < AR5K_SREV_AR5211) { + /* 5311 has different tx/rx latency masks + * from 5211, since we deal 5311 the same + * as 5211 when setting initvals, shift + * values here to their proper locations + * + * Note: Initvals indicate tx/rx/ latencies + * are the same for turbo mode */ + txlat = AR5K_REG_SM(txlat, AR5K_USEC_TX_LATENCY_5210); + rxlat = AR5K_REG_SM(rxlat, AR5K_USEC_RX_LATENCY_5210); + } else + switch (ah->ah_bwmode) { + case AR5K_BWMODE_10MHZ: + txlat = AR5K_REG_SM(txlat * 2, + AR5K_USEC_TX_LATENCY_5211); + rxlat = AR5K_REG_SM(AR5K_INIT_RX_LAT_MAX, + AR5K_USEC_RX_LATENCY_5211); + txf2txs = AR5K_INIT_TXF2TXD_START_DELAY_10MHZ; + break; + case AR5K_BWMODE_5MHZ: + txlat = AR5K_REG_SM(txlat * 4, + AR5K_USEC_TX_LATENCY_5211); + rxlat = AR5K_REG_SM(AR5K_INIT_RX_LAT_MAX, + AR5K_USEC_RX_LATENCY_5211); + txf2txs = AR5K_INIT_TXF2TXD_START_DELAY_5MHZ; + break; + case AR5K_BWMODE_40MHZ: + txlat = AR5K_INIT_TX_LAT_MIN; + rxlat = AR5K_REG_SM(rxlat / 2, + AR5K_USEC_RX_LATENCY_5211); + txf2txs = AR5K_INIT_TXF2TXD_START_DEFAULT; + break; + default: + break; + } + + usec_reg = (usec | sclock | txlat | rxlat); + ath5k_hw_reg_write(ah, usec_reg, AR5K_USEC); + + /* On 5112 set tx frane to tx data start delay */ + if (ah->ah_radio == AR5K_RF5112) { + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL2, + AR5K_PHY_RF_CTL2_TXF2TXD_START, + txf2txs); + } } /* @@ -122,7 +225,7 @@ void ath5k_hw_set_clockrate(struct ath5k_hw *ah) static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - u32 scal, spending, usec32; + u32 scal, spending; /* Only set 32KHz settings if we have an external * 32KHz crystal present */ @@ -179,6 +282,7 @@ static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable) AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_SLEEP_CLOCK_RATE, 0); + /* Set DAC/ADC delays */ ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR); ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT); @@ -201,13 +305,7 @@ static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable) spending = 0x18; ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING); - if ((ah->ah_radio == AR5K_RF5112) || - (ah->ah_radio == AR5K_RF5413)) - usec32 = 39; - else - usec32 = 31; - AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, usec32); - + /* Set up tsf increment on each cycle */ AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 1); } } @@ -822,6 +920,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, freq = 0; mode = 0; + /* * Stop PCU */ @@ -971,6 +1070,9 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, if (ret) return ret; + /* Initialize core clock settings */ + ath5k_hw_init_core_clock(ah); + /* * Tweak initval settings for revised * chipsets and add some more config |