diff options
-rw-r--r-- | drivers/net/wireless/ath/ath5k/ath5k.h | 1 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath5k/base.c | 1 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath5k/phy.c | 33 |
3 files changed, 12 insertions, 23 deletions
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h index 2785946f659a..131e8b36feaf 100644 --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -1270,6 +1270,7 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel); void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah); int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel); +void ath5k_hw_update_noise_floor(struct ath5k_hw *ah); /* Spur mitigation */ bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, struct ieee80211_channel *channel); diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 59268d18305a..3d854f0853ac 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2807,6 +2807,7 @@ ath5k_tasklet_calibrate(unsigned long data) ieee80211_frequency_to_channel( sc->curchan->center_freq)); + ath5k_hw_update_noise_floor(ah); /* Wake queues */ ieee80211_wake_queues(sc->hw); diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 1b81c4778800..2b298ea869d6 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -1167,7 +1167,7 @@ static s16 ath5k_hw_get_median_noise_floor(struct ath5k_hw *ah) * The median of the values in the history is then loaded into the * hardware for its own use for RSSI and CCA measurements. */ -static void ath5k_hw_update_noise_floor(struct ath5k_hw *ah) +void ath5k_hw_update_noise_floor(struct ath5k_hw *ah) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; u32 val; @@ -1248,7 +1248,6 @@ static void ath5k_hw_update_noise_floor(struct ath5k_hw *ah) /* * Perform a PHY calibration on RF5110 * -Fix BPSK/QAM Constellation (I/Q correction) - * -Calculate Noise Floor */ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel) @@ -1335,8 +1334,6 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, return ret; } - ath5k_hw_update_noise_floor(ah); - /* * Re-enable RX/TX and beacons */ @@ -1348,10 +1345,10 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, } /* - * Perform a PHY calibration on RF5111/5112 and newer chips + * Perform I/Q calibration on RF5111/5112 and newer chips */ -static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah, - struct ieee80211_channel *channel) +static int +ath5k_hw_rf511x_iq_calibrate(struct ath5k_hw *ah) { u32 i_pwr, q_pwr; s32 iq_corr, i_coff, i_coffd, q_coff, q_coffd; @@ -1360,10 +1357,9 @@ static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah, if (!ah->ah_calibration || ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN) - goto done; + return 0; /* Calibration has finished, get the results and re-run */ - /* work around empty results which can apparently happen on 5212 */ for (i = 0; i <= 10; i++) { iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR); @@ -1384,7 +1380,7 @@ static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah, /* protect against divide by 0 and loss of sign bits */ if (i_coffd == 0 || q_coffd < 2) - goto done; + return -1; i_coff = (-iq_corr) / i_coffd; i_coff = clamp(i_coff, -32, 31); /* signed 6 bit */ @@ -1410,17 +1406,6 @@ static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah, AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_RUN); -done: - - /* TODO: Separate noise floor calibration from I/Q calibration - * since noise floor calibration interrupts rx path while I/Q - * calibration doesn't. We don't need to run noise floor calibration - * as often as I/Q calibration.*/ - ath5k_hw_update_noise_floor(ah); - - /* Initiate a gain_F calibration */ - ath5k_hw_request_rfgain_probe(ah); - return 0; } @@ -1434,8 +1419,10 @@ int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, if (ah->ah_radio == AR5K_RF5110) ret = ath5k_hw_rf5110_calibrate(ah, channel); - else - ret = ath5k_hw_rf511x_calibrate(ah, channel); + else { + ret = ath5k_hw_rf511x_iq_calibrate(ah); + ath5k_hw_request_rfgain_probe(ah); + } return ret; } |