diff options
-rw-r--r-- | drivers/net/wireless/ath/ath5k/phy.c | 34 |
1 files changed, 16 insertions, 18 deletions
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 7c6d7dc62f3a..6f0cf3a09b2c 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -2593,7 +2593,7 @@ ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min, /* Write PCDAC values on hw */ static void -ath5k_setup_pcdac_table(struct ath5k_hw *ah) +ath5k_write_pcdac_table(struct ath5k_hw *ah) { u8 *pcdac_out = ah->ah_txpower.txp_pd_table; int i; @@ -2742,7 +2742,7 @@ ath5k_combine_pwr_to_pdadc_curves(struct ath5k_hw *ah, /* Write PDADC values on hw */ static void -ath5k_setup_pwr_to_pdadc_table(struct ath5k_hw *ah, u8 ee_mode) +ath5k_write_pwr_to_pdadc_table(struct ath5k_hw *ah, u8 ee_mode) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; u8 *pdadc_out = ah->ah_txpower.txp_pd_table; @@ -2957,8 +2957,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, (s16) pcinfo_R->freq, pcinfo_L->max_pwr, pcinfo_R->max_pwr); - /* We are ready to go, fill PCDAC/PDADC - * table and write settings on hardware */ + /* Fill PCDAC/PDADC table */ switch (type) { case AR5K_PWRTABLE_LINEAR_PCDAC: /* For RF5112 we can have one or two curves @@ -2971,9 +2970,6 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, * match max power value with max * table index */ ah->ah_txpower.txp_offset = 64 - (table_max[0] / 2); - - /* Write settings on hw */ - ath5k_setup_pcdac_table(ah); break; case AR5K_PWRTABLE_PWR_TO_PCDAC: /* We are done for RF5111 since it has only @@ -2983,9 +2979,6 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, /* No rate powertable adjustment for RF5111 */ ah->ah_txpower.txp_min_idx = 0; ah->ah_txpower.txp_offset = 0; - - /* Write settings on hw */ - ath5k_setup_pcdac_table(ah); break; case AR5K_PWRTABLE_PWR_TO_PDADC: /* Set PDADC boundaries and fill @@ -2993,9 +2986,6 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, ath5k_combine_pwr_to_pdadc_curves(ah, table_min, table_max, ee->ee_pd_gains[ee_mode]); - /* Write settings on hw */ - ath5k_setup_pwr_to_pdadc_table(ah, ee_mode); - /* Set txp.offset, note that table_min * can be negative */ ah->ah_txpower.txp_offset = table_min[0]; @@ -3009,6 +2999,15 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, return 0; } +/* Write power table for current channel to hw */ +static void +ath5k_write_channel_powertable(struct ath5k_hw *ah, u8 ee_mode, u8 type) +{ + if (type == AR5K_PWRTABLE_PWR_TO_PDADC) + ath5k_write_pwr_to_pdadc_table(ah, ee_mode); + else + ath5k_write_pcdac_table(ah); +} /* * Per-rate tx power setting @@ -3159,11 +3158,10 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, ee_mode, type); if (ret) return ret; - /* Write cached table on hw */ - } else if (type == AR5K_PWRTABLE_PWR_TO_PDADC) - ath5k_setup_pwr_to_pdadc_table(ah, ee_mode); - else - ath5k_setup_pcdac_table(ah); + } + + /* Write table on hw */ + ath5k_write_channel_powertable(ah, ee_mode, type); /* Limit max power if we have a CTL available */ ath5k_get_max_ctl_power(ah, channel); |