diff options
| -rw-r--r-- | drivers/usb/dwc3/dwc3-omap.c | 60 | ||||
| -rw-r--r-- | include/linux/usb/dwc3-omap.h | 30 |
2 files changed, 90 insertions, 0 deletions
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index f85ae5e6129d..831b75fa4386 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -43,6 +43,7 @@ #include <linux/spinlock.h> #include <linux/platform_device.h> #include <linux/platform_data/dwc3-omap.h> +#include <linux/usb/dwc3-omap.h> #include <linux/pm_runtime.h> #include <linux/dma-mapping.h> #include <linux/ioport.h> @@ -131,6 +132,8 @@ struct dwc3_omap { u32 dma_status:1; }; +struct dwc3_omap *_omap; + static inline u32 dwc3_omap_readl(void __iomem *base, u32 offset) { return readl(base + offset); @@ -141,6 +144,57 @@ static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value) writel(value, base + offset); } +void dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status) +{ + u32 val; + struct dwc3_omap *omap = _omap; + + switch (status) { + case OMAP_DWC3_ID_GROUND: + dev_dbg(omap->dev, "ID GND\n"); + + val = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS); + val &= ~(USBOTGSS_UTMI_OTG_STATUS_IDDIG + | USBOTGSS_UTMI_OTG_STATUS_VBUSVALID + | USBOTGSS_UTMI_OTG_STATUS_SESSEND); + val |= USBOTGSS_UTMI_OTG_STATUS_SESSVALID + | USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT; + dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, val); + break; + + case OMAP_DWC3_VBUS_VALID: + dev_dbg(omap->dev, "VBUS Connect\n"); + + val = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS); + val &= ~USBOTGSS_UTMI_OTG_STATUS_SESSEND; + val |= USBOTGSS_UTMI_OTG_STATUS_IDDIG + | USBOTGSS_UTMI_OTG_STATUS_VBUSVALID + | USBOTGSS_UTMI_OTG_STATUS_SESSVALID + | USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT; + dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, val); + break; + + case OMAP_DWC3_ID_FLOAT: + case OMAP_DWC3_VBUS_OFF: + dev_dbg(omap->dev, "VBUS Disconnect\n"); + + val = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS); + val &= ~(USBOTGSS_UTMI_OTG_STATUS_SESSVALID + | USBOTGSS_UTMI_OTG_STATUS_VBUSVALID + | USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT); + val |= USBOTGSS_UTMI_OTG_STATUS_SESSEND + | USBOTGSS_UTMI_OTG_STATUS_IDDIG; + dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, val); + break; + + default: + dev_dbg(omap->dev, "ID float\n"); + } + + return; +} +EXPORT_SYMBOL_GPL(dwc3_omap_mailbox); + static int dwc3_omap_register_phys(struct dwc3_omap *omap) { struct nop_usb_xceiv_platform_data pdata; @@ -320,6 +374,12 @@ static int dwc3_omap_probe(struct platform_device *pdev) omap->irq = irq; omap->base = base; + /* + * REVISIT if we ever have two instances of the wrapper, we will be + * in big trouble + */ + _omap = omap; + pm_runtime_enable(dev); ret = pm_runtime_get_sync(dev); if (ret < 0) { diff --git a/include/linux/usb/dwc3-omap.h b/include/linux/usb/dwc3-omap.h new file mode 100644 index 000000000000..51eae14477f7 --- /dev/null +++ b/include/linux/usb/dwc3-omap.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2013 by Texas Instruments + * + * The Inventra Controller Driver for Linux is free software; you + * can redistribute it and/or modify it under the terms of the GNU + * General Public License version 2 as published by the Free Software + * Foundation. + */ + +#ifndef __DWC3_OMAP_H__ +#define __DWC3_OMAP_H__ + +enum omap_dwc3_vbus_id_status { + OMAP_DWC3_UNKNOWN = 0, + OMAP_DWC3_ID_GROUND, + OMAP_DWC3_ID_FLOAT, + OMAP_DWC3_VBUS_VALID, + OMAP_DWC3_VBUS_OFF, +}; + +#if (defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_DWC3_MODULE)) +extern void dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status); +#else +static inline void dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status) +{ + return; +} +#endif + +#endif /* __DWC3_OMAP_H__ */ |