summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/mtd/gpmc-nand.txt28
-rw-r--r--Documentation/devicetree/bindings/net/gpmc-eth.txt56
-rw-r--r--arch/arm/configs/omap2plus_defconfig2
-rw-r--r--arch/arm/mach-omap1/dma.c8
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c6
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c4
-rw-r--r--arch/arm/mach-omap2/gpmc.c38
-rw-r--r--arch/arm/mach-omap2/id.c13
-rw-r--r--arch/arm/mach-omap2/mux34xx.h6
-rw-r--r--arch/arm/mach-omap2/omap_device.c2
-rw-r--r--arch/arm/mach-omap2/soc.h2
11 files changed, 81 insertions, 84 deletions
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index e7f8d7ed47eb..6a983c1d87cd 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -56,20 +56,20 @@ Example for an AM33xx board:
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
- gpmc,sync-clk = <0>;
- gpmc,cs-on = <0>;
- gpmc,cs-rd-off = <44>;
- gpmc,cs-wr-off = <44>;
- gpmc,adv-on = <6>;
- gpmc,adv-rd-off = <34>;
- gpmc,adv-wr-off = <44>;
- gpmc,we-off = <40>;
- gpmc,oe-off = <54>;
- gpmc,access = <64>;
- gpmc,rd-cycle = <82>;
- gpmc,wr-cycle = <82>;
- gpmc,wr-access = <40>;
- gpmc,wr-data-mux-bus = <0>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt
index 24cb4e46f675..ace4a64b3695 100644
--- a/Documentation/devicetree/bindings/net/gpmc-eth.txt
+++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt
@@ -26,16 +26,16 @@ Required properties:
- bank-width: Address width of the device in bytes. GPMC supports 8-bit
and 16-bit devices and so must be either 1 or 2 bytes.
- compatible: Compatible string property for the ethernet child device.
-- gpmc,cs-on: Chip-select assertion time
-- gpmc,cs-rd-off: Chip-select de-assertion time for reads
-- gpmc,cs-wr-off: Chip-select de-assertion time for writes
-- gpmc,oe-on: Output-enable assertion time
-- gpmc,oe-off Output-enable de-assertion time
-- gpmc,we-on: Write-enable assertion time
-- gpmc,we-off: Write-enable de-assertion time
-- gpmc,access: Start cycle to first data capture (read access)
-- gpmc,rd-cycle: Total read cycle time
-- gpmc,wr-cycle: Total write cycle time
+- gpmc,cs-on-ns: Chip-select assertion time
+- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads
+- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes
+- gpmc,oe-on-ns: Output-enable assertion time
+- gpmc,oe-off-ns: Output-enable de-assertion time
+- gpmc,we-on-ns: Write-enable assertion time
+- gpmc,we-off-ns: Write-enable de-assertion time
+- gpmc,access-ns: Start cycle to first data capture (read access)
+- gpmc,rd-cycle-ns: Total read cycle time
+- gpmc,wr-cycle-ns: Total write cycle time
- reg: Chip-select, base address (relative to chip-select)
and size of the memory mapped for the device.
Note that base address will be typically 0 as this
@@ -65,24 +65,24 @@ gpmc: gpmc@6e000000 {
bank-width = <2>;
gpmc,mux-add-data;
- gpmc,cs-on = <0>;
- gpmc,cs-rd-off = <186>;
- gpmc,cs-wr-off = <186>;
- gpmc,adv-on = <12>;
- gpmc,adv-rd-off = <48>;
- gpmc,adv-wr-off = <48>;
- gpmc,oe-on = <54>;
- gpmc,oe-off = <168>;
- gpmc,we-on = <54>;
- gpmc,we-off = <168>;
- gpmc,rd-cycle = <186>;
- gpmc,wr-cycle = <186>;
- gpmc,access = <114>;
- gpmc,page-burst-access = <6>;
- gpmc,bus-turnaround = <12>;
- gpmc,cycle2cycle-delay = <18>;
- gpmc,wr-data-mux-bus = <90>;
- gpmc,wr-access = <186>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <186>;
+ gpmc,cs-wr-off-ns = <186>;
+ gpmc,adv-on-ns = <12>;
+ gpmc,adv-rd-off-ns = <48>;
+ gpmc,adv-wr-off-ns = <48>;
+ gpmc,oe-on-ns = <54>;
+ gpmc,oe-off-ns = <168>;
+ gpmc,we-on-ns = <54>;
+ gpmc,we-off-ns = <168>;
+ gpmc,rd-cycle-ns = <186>;
+ gpmc,wr-cycle-ns = <186>;
+ gpmc,access-ns = <114>;
+ gpmc,page-burst-access-ns = <6>;
+ gpmc,bus-turnaround-ns = <12>;
+ gpmc,cycle2cycle-delay-ns = <18>;
+ gpmc,wr-data-mux-bus-ns = <90>;
+ gpmc,wr-access-ns = <186>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 51a20a441773..c1ef64bc5abd 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -155,6 +155,7 @@ CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS65910=y
+CONFIG_TWL6040_CORE=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
@@ -197,6 +198,7 @@ CONFIG_SND_USB_AUDIO=m
CONFIG_SND_SOC=m
CONFIG_SND_OMAP_SOC=m
CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
+CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
CONFIG_USB=y
CONFIG_USB_DEBUG=y
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 1a4e887f028d..68ab858e27b7 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -301,7 +301,7 @@ static int __init omap1_system_dma_init(void)
if (ret) {
dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
__func__, pdev->name, pdev->id);
- goto exit_device_put;
+ goto exit_iounmap;
}
p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
@@ -309,7 +309,7 @@ static int __init omap1_system_dma_init(void)
dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n",
__func__, pdev->name);
ret = -ENOMEM;
- goto exit_device_del;
+ goto exit_iounmap;
}
d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL);
@@ -402,8 +402,8 @@ exit_release_d:
kfree(d);
exit_release_p:
kfree(p);
-exit_device_del:
- platform_device_del(pdev);
+exit_iounmap:
+ iounmap(dma_base);
exit_device_put:
platform_device_put(pdev);
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 6de78605c0af..04c116555412 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -112,13 +112,13 @@ static u8 omap3_beagle_version;
*/
static struct {
int mmc1_gpio_wp;
- int usb_pwr_level;
+ bool usb_pwr_level; /* 0 - Active Low, 1 - Active High */
int dvi_pd_gpio;
int usr_button_gpio;
int mmc_caps;
} beagle_config = {
.mmc1_gpio_wp = -EINVAL,
- .usb_pwr_level = GPIOF_OUT_INIT_LOW,
+ .usb_pwr_level = 0,
.dvi_pd_gpio = -EINVAL,
.usr_button_gpio = 4,
.mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
@@ -178,7 +178,7 @@ static void __init omap3_beagle_init_rev(void)
case 0:
printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
- beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH;
+ beagle_config.usb_pwr_level = 1;
beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA;
break;
case 2:
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 1a884670a6c4..18ca61e300b3 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -73,11 +73,11 @@
#define LIS302_IRQ1_GPIO 181
#define LIS302_IRQ2_GPIO 180 /* Not yet in use */
-/* list all spi devices here */
+/* List all SPI devices here. Note that the list/probe order seems to matter! */
enum {
RX51_SPI_WL1251,
- RX51_SPI_MIPID, /* LCD panel */
RX51_SPI_TSC2005, /* Touch Controller */
+ RX51_SPI_MIPID, /* LCD panel */
};
static struct wl12xx_platform_data wl1251_pdata;
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index ed946df5ad8a..6c4da1254f53 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1520,36 +1520,22 @@ static int gpmc_probe_dt(struct platform_device *pdev)
return ret;
}
- for_each_node_by_name(child, "nand") {
- ret = gpmc_probe_nand_child(pdev, child);
- if (ret < 0) {
- of_node_put(child);
- return ret;
- }
- }
+ for_each_child_of_node(pdev->dev.of_node, child) {
- for_each_node_by_name(child, "onenand") {
- ret = gpmc_probe_onenand_child(pdev, child);
- if (ret < 0) {
- of_node_put(child);
- return ret;
- }
- }
+ if (!child->name)
+ continue;
- for_each_node_by_name(child, "nor") {
- ret = gpmc_probe_generic_child(pdev, child);
- if (ret < 0) {
- of_node_put(child);
- return ret;
- }
- }
+ if (of_node_cmp(child->name, "nand") == 0)
+ ret = gpmc_probe_nand_child(pdev, child);
+ else if (of_node_cmp(child->name, "onenand") == 0)
+ ret = gpmc_probe_onenand_child(pdev, child);
+ else if (of_node_cmp(child->name, "ethernet") == 0 ||
+ of_node_cmp(child->name, "nor") == 0)
+ ret = gpmc_probe_generic_child(pdev, child);
- for_each_node_by_name(child, "ethernet") {
- ret = gpmc_probe_generic_child(pdev, child);
- if (ret < 0) {
+ if (WARN(ret < 0, "%s: probing gpmc child %s failed\n",
+ __func__, child->full_name))
of_node_put(child);
- return ret;
- }
}
return 0;
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 0f4c18e6e60c..1272c41d4749 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -419,11 +419,15 @@ void __init omap3xxx_check_revision(void)
cpu_rev = "1.0";
break;
case 1:
- /* FALLTHROUGH */
- default:
omap_revision = AM335X_REV_ES2_0;
cpu_rev = "2.0";
break;
+ case 2:
+ /* FALLTHROUGH */
+ default:
+ omap_revision = AM335X_REV_ES2_1;
+ cpu_rev = "2.1";
+ break;
}
break;
case 0xb8f2:
@@ -644,13 +648,12 @@ void __init omap_soc_device_init(void)
soc_dev_attr->revision = soc_rev;
soc_dev = soc_device_register(soc_dev_attr);
- if (IS_ERR_OR_NULL(soc_dev)) {
+ if (IS_ERR(soc_dev)) {
kfree(soc_dev_attr);
return;
}
parent = soc_device_to_device(soc_dev);
- if (!IS_ERR_OR_NULL(parent))
- device_create_file(parent, &omap_soc_attr);
+ device_create_file(parent, &omap_soc_attr);
}
#endif /* CONFIG_SOC_BUS */
diff --git a/arch/arm/mach-omap2/mux34xx.h b/arch/arm/mach-omap2/mux34xx.h
index 6543ebf8ecfc..3f26d297c082 100644
--- a/arch/arm/mach-omap2/mux34xx.h
+++ b/arch/arm/mach-omap2/mux34xx.h
@@ -393,6 +393,10 @@
#define OMAP3_CONTROL_PADCONF_SAD2D_SWAKEUP_OFFSET 0xa1c
#define OMAP3_CONTROL_PADCONF_JTAG_RTCK_OFFSET 0xa1e
#define OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET 0xa20
+#define OMAP3_CONTROL_PADCONF_GPIO_127 0xa24
+#define OMAP3_CONTROL_PADCONF_GPIO_126 0xa26
+#define OMAP3_CONTROL_PADCONF_GPIO_128 0xa28
+#define OMAP3_CONTROL_PADCONF_GPIO_129 0xa2a
#define OMAP3_CONTROL_PADCONF_MUX_SIZE \
- (OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x2)
+ (OMAP3_CONTROL_PADCONF_GPIO_129 + 0x2)
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index eeea4fa28fbc..e6d230700b2b 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -876,4 +876,4 @@ static int __init omap_device_late_init(void)
bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle);
return 0;
}
-omap_late_initcall(omap_device_late_init);
+omap_late_initcall_sync(omap_device_late_init);
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index 18fdeeb3a44a..197cc16870d9 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -396,6 +396,7 @@ IS_OMAP_TYPE(3430, 0x3430)
#define AM335X_CLASS 0x33500033
#define AM335X_REV_ES1_0 AM335X_CLASS
#define AM335X_REV_ES2_0 (AM335X_CLASS | (0x1 << 8))
+#define AM335X_REV_ES2_1 (AM335X_CLASS | (0x2 << 8))
#define OMAP443X_CLASS 0x44300044
#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8))
@@ -496,6 +497,7 @@ level(__##fn);
#define omap_subsys_initcall(fn) omap_initcall(subsys_initcall, fn)
#define omap_device_initcall(fn) omap_initcall(device_initcall, fn)
#define omap_late_initcall(fn) omap_initcall(late_initcall, fn)
+#define omap_late_initcall_sync(fn) omap_initcall(late_initcall_sync, fn)
#endif /* __ASSEMBLY__ */
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 06:33:06 +0000