summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/mtd/gpmc-nand.txt28
-rw-r--r--Documentation/devicetree/bindings/net/gpmc-eth.txt56
-rw-r--r--arch/arm/Kconfig1
-rw-r--r--arch/arm/boot/dts/am33xx.dtsi12
-rw-r--r--arch/arm/boot/dts/cros5250-common.dtsi8
-rw-r--r--arch/arm/boot/dts/exynos5250-smdk5250.dts2
-rw-r--r--arch/arm/boot/dts/exynos5250-snow.dts2
-rw-r--r--arch/arm/boot/dts/omap3-beagle-xm.dts1
-rw-r--r--arch/arm/boot/dts/omap3-evm.dts1
-rw-r--r--arch/arm/boot/dts/omap3-overo.dtsi1
-rw-r--r--arch/arm/boot/dts/omap3.dtsi1
-rw-r--r--arch/arm/boot/dts/omap36xx.dtsi6
-rw-r--r--arch/arm/boot/dts/omap4-sdp.dts14
-rw-r--r--arch/arm/boot/dts/omap4-var-som.dts2
-rw-r--r--arch/arm/boot/dts/omap4460.dtsi6
-rw-r--r--arch/arm/configs/omap2plus_defconfig4
-rw-r--r--arch/arm/kernel/devtree.c7
-rw-r--r--arch/arm/kernel/setup.c13
-rw-r--r--arch/arm/mach-exynos/include/mach/regs-pmu.h1
-rw-r--r--arch/arm/mach-exynos/pmu.c5
-rw-r--r--arch/arm/mach-imx/Kconfig5
-rw-r--r--arch/arm/mach-imx/Makefile1
-rw-r--r--arch/arm/mach-imx/common.h1
-rw-r--r--arch/arm/mach-imx/headsmp.S2
-rw-r--r--arch/arm/mach-imx/hotplug.c2
-rw-r--r--arch/arm/mach-imx/iram_alloc.c73
-rw-r--r--arch/arm/mach-omap1/dma.c8
-rw-r--r--arch/arm/mach-omap2/Kconfig2
-rw-r--r--arch/arm/mach-omap2/Makefile8
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c6
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c4
-rw-r--r--arch/arm/mach-omap2/gpmc.c38
-rw-r--r--arch/arm/mach-omap2/id.c13
-rw-r--r--arch/arm/mach-omap2/mux34xx.h6
-rw-r--r--arch/arm/mach-omap2/omap_device.c2
-rw-r--r--arch/arm/mach-omap2/soc.h2
-rw-r--r--arch/arm/mach-prima2/Kconfig2
-rw-r--r--arch/arm/mach-spear/spear13xx.c2
-rw-r--r--arch/arm/mach-tegra/Kconfig1
-rw-r--r--arch/arm/mach-ux500/Kconfig2
-rw-r--r--arch/arm/mach-ux500/board-mop500.c4
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c2
-rw-r--r--drivers/video/Kconfig2
-rw-r--r--drivers/video/mxsfb.c8
-rw-r--r--include/linux/platform_data/imx-iram.h41
45 files changed, 173 insertions, 235 deletions
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index e7f8d7ed47eb..6a983c1d87cd 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -56,20 +56,20 @@ Example for an AM33xx board:
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
- gpmc,sync-clk = <0>;
- gpmc,cs-on = <0>;
- gpmc,cs-rd-off = <44>;
- gpmc,cs-wr-off = <44>;
- gpmc,adv-on = <6>;
- gpmc,adv-rd-off = <34>;
- gpmc,adv-wr-off = <44>;
- gpmc,we-off = <40>;
- gpmc,oe-off = <54>;
- gpmc,access = <64>;
- gpmc,rd-cycle = <82>;
- gpmc,wr-cycle = <82>;
- gpmc,wr-access = <40>;
- gpmc,wr-data-mux-bus = <0>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt
index 24cb4e46f675..ace4a64b3695 100644
--- a/Documentation/devicetree/bindings/net/gpmc-eth.txt
+++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt
@@ -26,16 +26,16 @@ Required properties:
- bank-width: Address width of the device in bytes. GPMC supports 8-bit
and 16-bit devices and so must be either 1 or 2 bytes.
- compatible: Compatible string property for the ethernet child device.
-- gpmc,cs-on: Chip-select assertion time
-- gpmc,cs-rd-off: Chip-select de-assertion time for reads
-- gpmc,cs-wr-off: Chip-select de-assertion time for writes
-- gpmc,oe-on: Output-enable assertion time
-- gpmc,oe-off Output-enable de-assertion time
-- gpmc,we-on: Write-enable assertion time
-- gpmc,we-off: Write-enable de-assertion time
-- gpmc,access: Start cycle to first data capture (read access)
-- gpmc,rd-cycle: Total read cycle time
-- gpmc,wr-cycle: Total write cycle time
+- gpmc,cs-on-ns: Chip-select assertion time
+- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads
+- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes
+- gpmc,oe-on-ns: Output-enable assertion time
+- gpmc,oe-off-ns: Output-enable de-assertion time
+- gpmc,we-on-ns: Write-enable assertion time
+- gpmc,we-off-ns: Write-enable de-assertion time
+- gpmc,access-ns: Start cycle to first data capture (read access)
+- gpmc,rd-cycle-ns: Total read cycle time
+- gpmc,wr-cycle-ns: Total write cycle time
- reg: Chip-select, base address (relative to chip-select)
and size of the memory mapped for the device.
Note that base address will be typically 0 as this
@@ -65,24 +65,24 @@ gpmc: gpmc@6e000000 {
bank-width = <2>;
gpmc,mux-add-data;
- gpmc,cs-on = <0>;
- gpmc,cs-rd-off = <186>;
- gpmc,cs-wr-off = <186>;
- gpmc,adv-on = <12>;
- gpmc,adv-rd-off = <48>;
- gpmc,adv-wr-off = <48>;
- gpmc,oe-on = <54>;
- gpmc,oe-off = <168>;
- gpmc,we-on = <54>;
- gpmc,we-off = <168>;
- gpmc,rd-cycle = <186>;
- gpmc,wr-cycle = <186>;
- gpmc,access = <114>;
- gpmc,page-burst-access = <6>;
- gpmc,bus-turnaround = <12>;
- gpmc,cycle2cycle-delay = <18>;
- gpmc,wr-data-mux-bus = <90>;
- gpmc,wr-access = <186>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <186>;
+ gpmc,cs-wr-off-ns = <186>;
+ gpmc,adv-on-ns = <12>;
+ gpmc,adv-rd-off-ns = <48>;
+ gpmc,adv-wr-off-ns = <48>;
+ gpmc,oe-on-ns = <54>;
+ gpmc,oe-off-ns = <168>;
+ gpmc,we-on-ns = <54>;
+ gpmc,we-off-ns = <168>;
+ gpmc,rd-cycle-ns = <186>;
+ gpmc,wr-cycle-ns = <186>;
+ gpmc,access-ns = <114>;
+ gpmc,page-burst-access-ns = <6>;
+ gpmc,bus-turnaround-ns = <12>;
+ gpmc,cycle2cycle-delay-ns = <18>;
+ gpmc,wr-data-mux-bus-ns = <90>;
+ gpmc,wr-access-ns = <186>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 46e2b5228606..d423d58f938d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -897,7 +897,6 @@ config ARCH_MULTI_V7
bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
default y
select ARCH_MULTI_V6_V7
- select ARCH_VEXPRESS
select CPU_V7
config ARCH_MULTI_V6_V7
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index d1101103aa51..1460d9b88adf 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -403,5 +403,17 @@
0x44d80000 0x2000>; /* M3 DMEM */
ti,hwmods = "wkup_m3";
};
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,am3352-gpmc";
+ ti,hwmods = "gpmc";
+ reg = <0x50000000 0x2000>;
+ interrupts = <100>;
+ num-cs = <7>;
+ num-waitpins = <2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi
index 0a61bbb9102f..3f0239ec1bc5 100644
--- a/arch/arm/boot/dts/cros5250-common.dtsi
+++ b/arch/arm/boot/dts/cros5250-common.dtsi
@@ -175,6 +175,14 @@
i2c@12C70000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
+
+ trackpad {
+ reg = <0x67>;
+ compatible = "cypress,cyapa";
+ interrupts = <2 0>;
+ interrupt-parent = <&gpx1>;
+ wakeup-source;
+ };
};
i2c@12C80000 {
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 26d856ba50a1..3e0c792e2767 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -214,7 +214,7 @@
};
usb@12110000 {
- samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+ samsung,vbus-gpio = <&gpx2 6 0>;
};
dp-controller {
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index bf4744bab445..d449feb7e143 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -183,7 +183,7 @@
};
usb@12110000 {
- samsung,vbus-gpio = <&gpx1 1 1 3 3>;
+ samsung,vbus-gpio = <&gpx1 1 0>;
};
fixed-rate-clocks {
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 5a31964ae339..3046d1f81be0 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -122,6 +122,7 @@
&usb_otg_hs {
interface-type = <0>;
+ usb-phy = <&usb2_phy>;
mode = <3>;
power = <50>;
};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index 05f51e10ddd6..96d1c206a57b 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -68,6 +68,7 @@
&usb_otg_hs {
interface-type = <0>;
+ usb-phy = <&usb2_phy>;
mode = <3>;
power = <50>;
};
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
index d4a7280d18b7..a626c50041f6 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -73,6 +73,7 @@
&usb_otg_hs {
interface-type = <0>;
+ usb-phy = <&usb2_phy>;
mode = <3>;
power = <50>;
};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 4ad03d9dbf0c..82a404da1c0d 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -519,7 +519,6 @@
interrupts = <0 92 0x4>, <0 93 0x4>;
interrupt-names = "mc", "dma";
ti,hwmods = "usb_otg_hs";
- usb-phy = <&usb2_phy>;
multipoint = <1>;
num-eps = <16>;
ram-bits = <12>;
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index b89233e43b0f..f3447bc1b032 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -20,9 +20,9 @@
cpu@0 {
operating-points = <
/* kHz uV */
- 300000 975000
- 600000 1075000
- 800000 1200000
+ 300000 1012500
+ 600000 1200000
+ 800000 1325000
>;
clock-latency = <300000>; /* From legacy driver */
};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index c387bdc1b1d1..a35d9cd58063 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -223,6 +223,15 @@
>;
};
+ mcspi1_pins: pinmux_mcspi1_pins {
+ pinctrl-single,pins = <
+ 0xf2 0x100 /* mcspi1_clk.mcspi1_clk INPUT | MODE0 */
+ 0xf4 0x100 /* mcspi1_somi.mcspi1_somi INPUT | MODE0 */
+ 0xf6 0x100 /* mcspi1_simo.mcspi1_simo INPUT | MODE0 */
+ 0xf8 0x100 /* mcspi1_cs0.mcspi1_cs0 INPUT | MODE0*/
+ >;
+ };
+
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
@@ -358,12 +367,15 @@
};
&mcspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi1_pins>;
+
eth@0 {
compatible = "ks8851";
spi-max-frequency = <24000000>;
reg = <0>;
interrupt-parent = <&gpio2>;
- interrupts = <2>; /* gpio line 34 */
+ interrupts = <2 8>; /* gpio line 34, low triggered */
vdd-supply = <&vdd_eth>;
};
};
diff --git a/arch/arm/boot/dts/omap4-var-som.dts b/arch/arm/boot/dts/omap4-var-som.dts
index 222a413c2c51..7e04103779c4 100644
--- a/arch/arm/boot/dts/omap4-var-som.dts
+++ b/arch/arm/boot/dts/omap4-var-som.dts
@@ -68,7 +68,7 @@
spi-max-frequency = <24000000>;
reg = <0>;
interrupt-parent = <&gpio6>;
- interrupts = <11>; /* gpio line 171 */
+ interrupts = <11 8>; /* gpio line 171, low triggered */
vdd-supply = <&vdd_eth>;
};
};
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index 7c2c23cc17ef..2cf227c86099 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -15,9 +15,9 @@
cpu@0 {
operating-points = <
/* kHz uV */
- 350000 975000
- 700000 1075000
- 920000 1200000
+ 350000 1025000
+ 700000 1200000
+ 920000 1313000
>;
clock-latency = <300000>; /* From legacy driver */
};
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 33903ca0d879..c1ef64bc5abd 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -137,6 +137,8 @@ CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_OMAP=y
+CONFIG_SERIAL_OMAP_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_I2C_CHARDEV=y
CONFIG_SPI=y
@@ -153,6 +155,7 @@ CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS65910=y
+CONFIG_TWL6040_CORE=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
@@ -195,6 +198,7 @@ CONFIG_SND_USB_AUDIO=m
CONFIG_SND_SOC=m
CONFIG_SND_OMAP_SOC=m
CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
+CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
CONFIG_USB=y
CONFIG_USB_DEBUG=y
diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
index 70f1bdeb241b..5af04f6daa33 100644
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -180,6 +180,13 @@ struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
unsigned long dt_root;
const char *model;
+#ifdef CONFIG_ARCH_MULTIPLATFORM
+ DT_MACHINE_START(GENERIC_DT, "Generic DT based system")
+ MACHINE_END
+
+ mdesc_best = (struct machine_desc *)&__mach_desc_GENERIC_DT;
+#endif
+
if (!dt_phys)
return NULL;
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 728007c4a2b7..1522c7ae31b0 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -18,6 +18,7 @@
#include <linux/bootmem.h>
#include <linux/seq_file.h>
#include <linux/screen_info.h>
+#include <linux/of_platform.h>
#include <linux/init.h>
#include <linux/kexec.h>
#include <linux/of_fdt.h>
@@ -659,9 +660,19 @@ struct screen_info screen_info = {
static int __init customize_machine(void)
{
- /* customizes platform devices, or adds new ones */
+ /*
+ * customizes platform devices, or adds new ones
+ * On DT based machines, we fall back to populating the
+ * machine from the device tree, if no callback is provided,
+ * otherwise we would always need an init_machine callback.
+ */
if (machine_desc->init_machine)
machine_desc->init_machine();
+#ifdef CONFIG_OF
+ else
+ of_platform_populate(NULL, of_default_bus_match_table,
+ NULL, NULL);
+#endif
return 0;
}
arch_initcall(customize_machine);
diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h
index 3f30aa1ae354..57344b7e98ce 100644
--- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -344,6 +344,7 @@
#define EXYNOS5_FSYS_ARM_OPTION S5P_PMUREG(0x2208)
#define EXYNOS5_ISP_ARM_OPTION S5P_PMUREG(0x2288)
#define EXYNOS5_ARM_COMMON_OPTION S5P_PMUREG(0x2408)
+#define EXYNOS5_ARM_L2_OPTION S5P_PMUREG(0x2608)
#define EXYNOS5_TOP_PWR_OPTION S5P_PMUREG(0x2C48)
#define EXYNOS5_TOP_PWR_SYSMEM_OPTION S5P_PMUREG(0x2CC8)
#define EXYNOS5_JPEG_MEM_OPTION S5P_PMUREG(0x2F48)
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
index daebc1abc966..97d688526258 100644
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@@ -228,6 +228,7 @@ static struct exynos_pmu_conf exynos5250_pmu_config[] = {
{ EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
{ EXYNOS5_ARM_L2_SYS_PWR_REG, { 0x3, 0x3, 0x3} },
+ { EXYNOS5_ARM_L2_OPTION, { 0x10, 0x10, 0x0 } },
{ EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
@@ -353,11 +354,9 @@ static void exynos5_init_pmu(void)
/*
* SKIP_DEACTIVATE_ACEACP_IN_PWDN_BITFIELD Enable
- * MANUAL_L2RSTDISABLE_CONTROL_BITFIELD Enable
*/
tmp = __raw_readl(EXYNOS5_ARM_COMMON_OPTION);
- tmp |= (EXYNOS5_MANUAL_L2RSTDISABLE_CONTROL |
- EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN);
+ tmp |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
__raw_writel(tmp, EXYNOS5_ARM_COMMON_OPTION);
/*
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 78f795d73cb6..ba44328464f3 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -5,6 +5,7 @@ config ARCH_MXC
select AUTO_ZRELADDR if !ZBOOT_ROM
select CLKDEV_LOOKUP
select CLKSRC_MMIO
+ select GENERIC_ALLOCATOR
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select MULTI_IRQ_HANDLER
@@ -61,10 +62,6 @@ config MXC_ULPI
config ARCH_HAS_RNGA
bool
-config IRAM_ALLOC
- bool
- select GENERIC_ALLOCATOR
-
config HAVE_IMX_ANATOP
bool
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 930958973f81..70ae7c490ac0 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_MXC_TZIC) += tzic.o
obj-$(CONFIG_MXC_AVIC) += avic.o
-obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
obj-$(CONFIG_MXC_ULPI) += ulpi.o
obj-$(CONFIG_MXC_USE_EPIT) += epit.o
obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 4cba7dbb079f..c08ae3f99cee 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -12,6 +12,7 @@
#define __ASM_ARCH_MXC_COMMON_H__
struct platform_device;
+struct pt_regs;
struct clk;
enum mxc_cpu_pwr_mode;
diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S
index a58c8b0527cc..67b9c48dcafe 100644
--- a/arch/arm/mach-imx/headsmp.S
+++ b/arch/arm/mach-imx/headsmp.S
@@ -24,7 +24,7 @@ ENTRY(v7_secondary_startup)
ENDPROC(v7_secondary_startup)
#endif
-#ifdef CONFIG_PM
+#ifdef CONFIG_ARM_CPU_SUSPEND
/*
* The following code must assume it is running from physical address
* where absolute virtual addresses to the data section have to be
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 5e91112dcbee..3daf1ed90579 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -11,7 +11,9 @@
*/
#include <linux/errno.h>
+#include <linux/jiffies.h>
#include <asm/cp15.h>
+#include <asm/proc-fns.h>
#include "common.h"
diff --git a/arch/arm/mach-imx/iram_alloc.c b/arch/arm/mach-imx/iram_alloc.c
deleted file mode 100644
index e05cf407db65..000000000000
--- a/arch/arm/mach-imx/iram_alloc.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/genalloc.h>
-#include "linux/platform_data/imx-iram.h"
-
-static unsigned long iram_phys_base;
-static void __iomem *iram_virt_base;
-static struct gen_pool *iram_pool;
-
-static inline void __iomem *iram_phys_to_virt(unsigned long p)
-{
- return iram_virt_base + (p - iram_phys_base);
-}
-
-void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr)
-{
- if (!iram_pool)
- return NULL;
-
- *dma_addr = gen_pool_alloc(iram_pool, size);
- pr_debug("iram alloc - %dB@0x%lX\n", size, *dma_addr);
- if (!*dma_addr)
- return NULL;
- return iram_phys_to_virt(*dma_addr);
-}
-EXPORT_SYMBOL(iram_alloc);
-
-void iram_free(unsigned long addr, unsigned int size)
-{
- if (!iram_pool)
- return;
-
- gen_pool_free(iram_pool, addr, size);
-}
-EXPORT_SYMBOL(iram_free);
-
-int __init iram_init(unsigned long base, unsigned long size)
-{
- iram_phys_base = base;
-
- iram_pool = gen_pool_create(PAGE_SHIFT, -1);
- if (!iram_pool)
- return -ENOMEM;
-
- gen_pool_add(iram_pool, base, size, -1);
- iram_virt_base = ioremap(iram_phys_base, size);
- if (!iram_virt_base)
- return -EIO;
-
- pr_debug("i.MX IRAM pool: %ld KB@0x%p\n", size / 1024, iram_virt_base);
- return 0;
-}
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 1a4e887f028d..68ab858e27b7 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -301,7 +301,7 @@ static int __init omap1_system_dma_init(void)
if (ret) {
dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
__func__, pdev->name, pdev->id);
- goto exit_device_put;
+ goto exit_iounmap;
}
p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
@@ -309,7 +309,7 @@ static int __init omap1_system_dma_init(void)
dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n",
__func__, pdev->name);
ret = -ENOMEM;
- goto exit_device_del;
+ goto exit_iounmap;
}
d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL);
@@ -402,8 +402,8 @@ exit_release_d:
kfree(d);
exit_release_p:
kfree(p);
-exit_device_del:
- platform_device_del(pdev);
+exit_iounmap:
+ iounmap(dma_base);
exit_device_put:
platform_device_put(pdev);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 857b1f097fd8..f49cd51e162a 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -37,8 +37,6 @@ config ARCH_OMAP2PLUS_TYPICAL
select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
select PM_RUNTIME
select REGULATOR
- select SERIAL_OMAP
- select SERIAL_OMAP_CONSOLE
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
select VFP
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 62bb352c2d37..55a9d6777683 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -32,12 +32,12 @@ obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o
# SMP support ONLY available for OMAP4
-obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
-obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
+smp-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
+smp-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
omap-4-5-common = omap4-common.o omap-wakeupgen.o \
sleep44xx.o
-obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common)
-obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common) $(smp-y)
+obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) $(smp-y)
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 6de78605c0af..04c116555412 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -112,13 +112,13 @@ static u8 omap3_beagle_version;
*/
static struct {
int mmc1_gpio_wp;
- int usb_pwr_level;
+ bool usb_pwr_level; /* 0 - Active Low, 1 - Active High */
int dvi_pd_gpio;
int usr_button_gpio;
int mmc_caps;
} beagle_config = {
.mmc1_gpio_wp = -EINVAL,
- .usb_pwr_level = GPIOF_OUT_INIT_LOW,
+ .usb_pwr_level = 0,
.dvi_pd_gpio = -EINVAL,
.usr_button_gpio = 4,
.mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
@@ -178,7 +178,7 @@ static void __init omap3_beagle_init_rev(void)
case 0:
printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
- beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH;
+ beagle_config.usb_pwr_level = 1;
beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA;
break;
case 2:
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 1a884670a6c4..18ca61e300b3 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -73,11 +73,11 @@
#define LIS302_IRQ1_GPIO 181
#define LIS302_IRQ2_GPIO 180 /* Not yet in use */
-/* list all spi devices here */
+/* List all SPI devices here. Note that the list/probe order seems to matter! */
enum {
RX51_SPI_WL1251,
- RX51_SPI_MIPID, /* LCD panel */
RX51_SPI_TSC2005, /* Touch Controller */
+ RX51_SPI_MIPID, /* LCD panel */
};
static struct wl12xx_platform_data wl1251_pdata;
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index ed946df5ad8a..6c4da1254f53 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1520,36 +1520,22 @@ static int gpmc_probe_dt(struct platform_device *pdev)
return ret;
}
- for_each_node_by_name(child, "nand") {
- ret = gpmc_probe_nand_child(pdev, child);
- if (ret < 0) {
- of_node_put(child);
- return ret;
- }
- }
+ for_each_child_of_node(pdev->dev.of_node, child) {
- for_each_node_by_name(child, "onenand") {
- ret = gpmc_probe_onenand_child(pdev, child);
- if (ret < 0) {
- of_node_put(child);
- return ret;
- }
- }
+ if (!child->name)
+ continue;
- for_each_node_by_name(child, "nor") {
- ret = gpmc_probe_generic_child(pdev, child);
- if (ret < 0) {
- of_node_put(child);
- return ret;
- }
- }
+ if (of_node_cmp(child->name, "nand") == 0)
+ ret = gpmc_probe_nand_child(pdev, child);
+ else if (of_node_cmp(child->name, "onenand") == 0)
+ ret = gpmc_probe_onenand_child(pdev, child);
+ else if (of_node_cmp(child->name, "ethernet") == 0 ||
+ of_node_cmp(child->name, "nor") == 0)
+ ret = gpmc_probe_generic_child(pdev, child);
- for_each_node_by_name(child, "ethernet") {
- ret = gpmc_probe_generic_child(pdev, child);
- if (ret < 0) {
+ if (WARN(ret < 0, "%s: probing gpmc child %s failed\n",
+ __func__, child->full_name))
of_node_put(child);
- return ret;
- }
}
return 0;
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 0f4c18e6e60c..1272c41d4749 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -419,11 +419,15 @@ void __init omap3xxx_check_revision(void)
cpu_rev = "1.0";
break;
case 1:
- /* FALLTHROUGH */
- default:
omap_revision = AM335X_REV_ES2_0;
cpu_rev = "2.0";
break;
+ case 2:
+ /* FALLTHROUGH */
+ default:
+ omap_revision = AM335X_REV_ES2_1;
+ cpu_rev = "2.1";
+ break;
}
break;
case 0xb8f2:
@@ -644,13 +648,12 @@ void __init omap_soc_device_init(void)
soc_dev_attr->revision = soc_rev;
soc_dev = soc_device_register(soc_dev_attr);
- if (IS_ERR_OR_NULL(soc_dev)) {
+ if (IS_ERR(soc_dev)) {
kfree(soc_dev_attr);
return;
}
parent = soc_device_to_device(soc_dev);
- if (!IS_ERR_OR_NULL(parent))
- device_create_file(parent, &omap_soc_attr);
+ device_create_file(parent, &omap_soc_attr);
}
#endif /* CONFIG_SOC_BUS */
diff --git a/arch/arm/mach-omap2/mux34xx.h b/arch/arm/mach-omap2/mux34xx.h
index 6543ebf8ecfc..3f26d297c082 100644
--- a/arch/arm/mach-omap2/mux34xx.h
+++ b/arch/arm/mach-omap2/mux34xx.h
@@ -393,6 +393,10 @@
#define OMAP3_CONTROL_PADCONF_SAD2D_SWAKEUP_OFFSET 0xa1c
#define OMAP3_CONTROL_PADCONF_JTAG_RTCK_OFFSET 0xa1e
#define OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET 0xa20
+#define OMAP3_CONTROL_PADCONF_GPIO_127 0xa24
+#define OMAP3_CONTROL_PADCONF_GPIO_126 0xa26
+#define OMAP3_CONTROL_PADCONF_GPIO_128 0xa28
+#define OMAP3_CONTROL_PADCONF_GPIO_129 0xa2a
#define OMAP3_CONTROL_PADCONF_MUX_SIZE \
- (OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x2)
+ (OMAP3_CONTROL_PADCONF_GPIO_129 + 0x2)
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index eeea4fa28fbc..e6d230700b2b 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -876,4 +876,4 @@ static int __init omap_device_late_init(void)
bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle);
return 0;
}
-omap_late_initcall(omap_device_late_init);
+omap_late_initcall_sync(omap_device_late_init);
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index 18fdeeb3a44a..197cc16870d9 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -396,6 +396,7 @@ IS_OMAP_TYPE(3430, 0x3430)
#define AM335X_CLASS 0x33500033
#define AM335X_REV_ES1_0 AM335X_CLASS
#define AM335X_REV_ES2_0 (AM335X_CLASS | (0x1 << 8))
+#define AM335X_REV_ES2_1 (AM335X_CLASS | (0x2 << 8))
#define OMAP443X_CLASS 0x44300044
#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8))
@@ -496,6 +497,7 @@ level(__##fn);
#define omap_subsys_initcall(fn) omap_initcall(subsys_initcall, fn)
#define omap_device_initcall(fn) omap_initcall(device_initcall, fn)
#define omap_late_initcall(fn) omap_initcall(late_initcall, fn)
+#define omap_late_initcall_sync(fn) omap_initcall(late_initcall_sync, fn)
#endif /* __ASSEMBLY__ */
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
index 80ca974b2f82..6988b117fc17 100644
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@@ -38,7 +38,7 @@ config ARCH_MARCO
select CPU_V7
select HAVE_ARM_SCU if SMP
select HAVE_SMP
- select SMP_ON_UP
+ select SMP_ON_UP if SMP
help
Support for CSR SiRFSoC ARM Cortex A9 Platform
diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c
index 3621599c38ad..7aa6e8cf830f 100644
--- a/arch/arm/mach-spear/spear13xx.c
+++ b/arch/arm/mach-spear/spear13xx.c
@@ -35,6 +35,8 @@ void __init spear13xx_l2x0_init(void)
* write alloc and 'Full line of zero' options
*
*/
+ if (!IS_ENABLED(CONFIG_CACHE_L2X0))
+ return;
writel_relaxed(0x06, VA_L2CC_BASE + L2X0_PREFETCH_CTRL);
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 20c3b372cdf5..84d72fc36dfe 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -63,6 +63,7 @@ config ARCH_TEGRA_114_SOC
select ARM_ARCH_TIMER
select ARM_GIC
select ARM_L1_CACHE_SHIFT_6
+ select CPU_FREQ_TABLE if CPU_FREQ
select CPU_V7
select PINCTRL
select PINCTRL_TEGRA114
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index f66d7deae46d..6a4387e39df8 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -19,6 +19,8 @@ if ARCH_U8500
config UX500_SOC_COMMON
bool
default y
+ select ABX500_CORE
+ select AB8500_CORE
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select ARM_GIC
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index a15dd6b63a8f..3cd555ac6d0a 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -403,8 +403,8 @@ static int mop500_prox_activate(struct device *dev)
"no regulator\n");
return PTR_ERR(prox_regulator);
}
- regulator_enable(prox_regulator);
- return 0;
+
+ return regulator_enable(prox_regulator);
}
static void mop500_prox_deactivate(struct device *dev)
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 995928ba22fd..e90b5ab23b6d 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -191,7 +191,7 @@ static const char *db8500_read_soc_id(void)
/* Throw these device-specific numbers into the entropy pool */
add_device_randomness(uid, 0x14);
return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
- readl((u32 *)uid+1),
+ readl((u32 *)uid+0),
readl((u32 *)uid+1), readl((u32 *)uid+2),
readl((u32 *)uid+3), readl((u32 *)uid+4));
}
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 1534cf3c1423..d71d60f94fc1 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2429,7 +2429,7 @@ config FB_MXS
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_MODE_HELPERS
- select OF_VIDEOMODE
+ select VIDEOMODE_HELPERS
help
Framebuffer support for the MXS SoC.
diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index 1b2c26d1658c..21223d475b39 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/mxsfb.c
@@ -42,7 +42,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/of_device.h>
-#include <video/of_display_timing.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
@@ -50,6 +49,7 @@
#include <linux/pinctrl/consumer.h>
#include <linux/fb.h>
#include <linux/regulator/consumer.h>
+#include <video/of_display_timing.h>
#include <video/videomode.h>
#define REG_SET 4
@@ -777,16 +777,16 @@ static int mxsfb_init_fbinfo_dt(struct mxsfb_info *host)
struct videomode vm;
struct fb_videomode fb_vm;
- ret = videomode_from_timing(timings, &vm, i);
+ ret = videomode_from_timings(timings, &vm, i);
if (ret < 0)
goto put_timings_node;
ret = fb_videomode_from_videomode(&vm, &fb_vm);
if (ret < 0)
goto put_timings_node;
- if (vm.data_flags & DISPLAY_FLAGS_DE_HIGH)
+ if (vm.flags & DISPLAY_FLAGS_DE_HIGH)
host->sync |= MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
- if (vm.data_flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
+ if (vm.flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
host->sync |= MXSFB_SYNC_DOTCLK_FALLING_ACT;
fb_add_videomode(&fb_vm, &fb_info->modelist);
}
diff --git a/include/linux/platform_data/imx-iram.h b/include/linux/platform_data/imx-iram.h
deleted file mode 100644
index 022690c33702..000000000000
--- a/include/linux/platform_data/imx-iram.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#include <linux/errno.h>
-
-#ifdef CONFIG_IRAM_ALLOC
-
-int __init iram_init(unsigned long base, unsigned long size);
-void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr);
-void iram_free(unsigned long dma_addr, unsigned int size);
-
-#else
-
-static inline int __init iram_init(unsigned long base, unsigned long size)
-{
- return -ENOMEM;
-}
-
-static inline void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr)
-{
- return NULL;
-}
-
-static inline void iram_free(unsigned long base, unsigned long size) {}
-
-#endif