summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/i2c/busses/i2c-ali1535.c11
-rw-r--r--drivers/i2c/busses/i2c-nforce2.c2
-rw-r--r--drivers/i2c/busses/i2c-sis5595.c4
-rw-r--r--drivers/i2c/busses/i2c-sis630.c6
-rw-r--r--drivers/i2c/busses/i2c-viapro.c7
5 files changed, 20 insertions, 10 deletions
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index b6807db7b36f..5b667e53a813 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -140,7 +140,7 @@ static unsigned short ali1535_smba;
defined to make the transition easier. */
static int __devinit ali1535_setup(struct pci_dev *dev)
{
- int retval = -ENODEV;
+ int retval;
unsigned char temp;
/* Check the following things:
@@ -155,6 +155,7 @@ static int __devinit ali1535_setup(struct pci_dev *dev)
if (ali1535_smba == 0) {
dev_warn(&dev->dev,
"ALI1535_smb region uninitialized - upgrade BIOS?\n");
+ retval = -ENODEV;
goto exit;
}
@@ -167,6 +168,7 @@ static int __devinit ali1535_setup(struct pci_dev *dev)
ali1535_driver.name)) {
dev_err(&dev->dev, "ALI1535_smb region 0x%x already in use!\n",
ali1535_smba);
+ retval = -EBUSY;
goto exit;
}
@@ -174,6 +176,7 @@ static int __devinit ali1535_setup(struct pci_dev *dev)
pci_read_config_byte(dev, SMBCFG, &temp);
if ((temp & ALI1535_SMBIO_EN) == 0) {
dev_err(&dev->dev, "SMB device not enabled - upgrade BIOS?\n");
+ retval = -ENODEV;
goto exit_free;
}
@@ -181,6 +184,7 @@ static int __devinit ali1535_setup(struct pci_dev *dev)
pci_read_config_byte(dev, SMBHSTCFG, &temp);
if ((temp & 1) == 0) {
dev_err(&dev->dev, "SMBus controller not enabled - upgrade BIOS?\n");
+ retval = -ENODEV;
goto exit_free;
}
@@ -198,12 +202,11 @@ static int __devinit ali1535_setup(struct pci_dev *dev)
dev_dbg(&dev->dev, "SMBREV = 0x%X\n", temp);
dev_dbg(&dev->dev, "ALI1535_smba = 0x%X\n", ali1535_smba);
- retval = 0;
-exit:
- return retval;
+ return 0;
exit_free:
release_region(ali1535_smba, ALI1535_SMB_IOSIZE);
+exit:
return retval;
}
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index ff1e127dfea8..4853b52a40a8 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -356,7 +356,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar,
error = acpi_check_region(smbus->base, smbus->size,
nforce2_driver.name);
if (error)
- return -1;
+ return error;
if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) {
dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n",
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index 437586611d4a..6d60284cc04b 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -147,7 +147,7 @@ static int __devinit sis5595_setup(struct pci_dev *SIS5595_dev)
u16 a;
u8 val;
int *i;
- int retval = -ENODEV;
+ int retval;
/* Look for imposters */
for (i = blacklist; *i != 0; i++) {
@@ -223,7 +223,7 @@ static int __devinit sis5595_setup(struct pci_dev *SIS5595_dev)
error:
release_region(sis5595_base + SMB_INDEX, 2);
- return retval;
+ return -ENODEV;
}
static int sis5595_transaction(struct i2c_adapter *adap)
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index e6f539e26f65..b617fd068ac7 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -393,7 +393,7 @@ static int __devinit sis630_setup(struct pci_dev *sis630_dev)
{
unsigned char b;
struct pci_dev *dummy = NULL;
- int retval = -ENODEV, i;
+ int retval, i;
/* check for supported SiS devices */
for (i=0; supported[i] > 0 ; i++) {
@@ -418,18 +418,21 @@ static int __devinit sis630_setup(struct pci_dev *sis630_dev)
*/
if (pci_read_config_byte(sis630_dev, SIS630_BIOS_CTL_REG,&b)) {
dev_err(&sis630_dev->dev, "Error: Can't read bios ctl reg\n");
+ retval = -ENODEV;
goto exit;
}
/* if ACPI already enabled , do nothing */
if (!(b & 0x80) &&
pci_write_config_byte(sis630_dev, SIS630_BIOS_CTL_REG, b | 0x80)) {
dev_err(&sis630_dev->dev, "Error: Can't enable ACPI\n");
+ retval = -ENODEV;
goto exit;
}
/* Determine the ACPI base address */
if (pci_read_config_word(sis630_dev,SIS630_ACPI_BASE_REG,&acpi_base)) {
dev_err(&sis630_dev->dev, "Error: Can't determine ACPI base address\n");
+ retval = -ENODEV;
goto exit;
}
@@ -445,6 +448,7 @@ static int __devinit sis630_setup(struct pci_dev *sis630_dev)
sis630_driver.name)) {
dev_err(&sis630_dev->dev, "SMBus registers 0x%04x-0x%04x already "
"in use!\n", acpi_base + SMB_STS, acpi_base + SMB_SAA);
+ retval = -EBUSY;
goto exit;
}
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 0b012f1f8ac5..58261d4725b6 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -324,7 +324,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
unsigned char temp;
- int error = -ENODEV;
+ int error;
/* Determine the address of the SMBus areas */
if (force_addr) {
@@ -390,6 +390,7 @@ found:
dev_err(&pdev->dev, "SMBUS: Error: Host SMBus "
"controller not enabled! - upgrade BIOS or "
"use force=1\n");
+ error = -ENODEV;
goto release_region;
}
}
@@ -422,9 +423,11 @@ found:
"SMBus Via Pro adapter at %04x", vt596_smba);
vt596_pdev = pci_dev_get(pdev);
- if (i2c_add_adapter(&vt596_adapter)) {
+ error = i2c_add_adapter(&vt596_adapter);
+ if (error) {
pci_dev_put(vt596_pdev);
vt596_pdev = NULL;
+ goto release_region;
}
/* Always return failure here. This is to allow other drivers to bind
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 19:50:04 +0000