diff options
| -rw-r--r-- | arch/arm/mach-omap2/omap_hwmod.c | 19 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 16 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/prm44xx.c | 93 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/prm44xx.h | 4 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/prminst44xx.c | 93 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/prminst44xx.h | 10 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/omap_hwmod.h | 3 |
7 files changed, 125 insertions, 113 deletions
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d21f49b87646..a0f7d313e69f 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -149,6 +149,7 @@ #include "cminst44xx.h" #include "prm2xxx_3xxx.h" #include "prm44xx.h" +#include "prminst44xx.h" #include "mux.h" /* Maximum microseconds to wait for OMAP module to softreset */ @@ -1187,8 +1188,10 @@ static int _assert_hardreset(struct omap_hwmod *oh, const char *name) return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs, ohri.rst_shift); else if (cpu_is_omap44xx()) - return omap4_prm_assert_hardreset(oh->prcm.omap4.rstctrl_reg, - ohri.rst_shift); + return omap4_prminst_assert_hardreset(ohri.rst_shift, + oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs); else return -EINVAL; } @@ -1223,8 +1226,10 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) if (ohri.st_shift) pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n", oh->name, name); - ret = omap4_prm_deassert_hardreset(oh->prcm.omap4.rstctrl_reg, - ohri.rst_shift); + ret = omap4_prminst_deassert_hardreset(ohri.rst_shift, + oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs); } else { return -EINVAL; } @@ -1259,8 +1264,10 @@ static int _read_hardreset(struct omap_hwmod *oh, const char *name) return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs, ohri.st_shift); } else if (cpu_is_omap44xx()) { - return omap4_prm_is_hardreset_asserted(oh->prcm.omap4.rstctrl_reg, - ohri.rst_shift); + return omap4_prminst_is_hardreset_asserted(ohri.rst_shift, + oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs); } else { return -EINVAL; } diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 00d7130dd6cb..6a190f5de47c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1144,7 +1144,7 @@ static struct omap_hwmod omap44xx_dsp_c0_hwmod = { .rst_lines_cnt = ARRAY_SIZE(omap44xx_dsp_c0_resets), .prcm = { .omap4 = { - .rstctrl_reg = OMAP4430_RM_TESLA_RSTCTRL, + .rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET, }, }, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -1161,7 +1161,7 @@ static struct omap_hwmod omap44xx_dsp_hwmod = { .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET, - .rstctrl_reg = OMAP4430_RM_TESLA_RSTCTRL, + .rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET, }, }, .slaves = omap44xx_dsp_slaves, @@ -2526,7 +2526,7 @@ static struct omap_hwmod omap44xx_ipu_c0_hwmod = { .rst_lines_cnt = ARRAY_SIZE(omap44xx_ipu_c0_resets), .prcm = { .omap4 = { - .rstctrl_reg = OMAP4430_RM_DUCATI_RSTCTRL, + .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET, }, }, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -2542,7 +2542,7 @@ static struct omap_hwmod omap44xx_ipu_c1_hwmod = { .rst_lines_cnt = ARRAY_SIZE(omap44xx_ipu_c1_resets), .prcm = { .omap4 = { - .rstctrl_reg = OMAP4430_RM_DUCATI_RSTCTRL, + .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET, }, }, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -2559,7 +2559,7 @@ static struct omap_hwmod omap44xx_ipu_hwmod = { .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET, - .rstctrl_reg = OMAP4430_RM_DUCATI_RSTCTRL, + .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET, }, }, .slaves = omap44xx_ipu_slaves, @@ -2726,7 +2726,7 @@ static struct omap_hwmod omap44xx_iva_seq0_hwmod = { .rst_lines_cnt = ARRAY_SIZE(omap44xx_iva_seq0_resets), .prcm = { .omap4 = { - .rstctrl_reg = OMAP4430_RM_IVAHD_RSTCTRL, + .rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET, }, }, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -2742,7 +2742,7 @@ static struct omap_hwmod omap44xx_iva_seq1_hwmod = { .rst_lines_cnt = ARRAY_SIZE(omap44xx_iva_seq1_resets), .prcm = { .omap4 = { - .rstctrl_reg = OMAP4430_RM_IVAHD_RSTCTRL, + .rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET, }, }, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -2759,7 +2759,7 @@ static struct omap_hwmod omap44xx_iva_hwmod = { .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_IVAHD_IVAHD_CLKCTRL_OFFSET, - .rstctrl_reg = OMAP4430_RM_IVAHD_RSTCTRL, + .rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET, }, }, .slaves = omap44xx_iva_slaves, diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index a2a04bfa9628..faec860ebc0e 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -1,7 +1,7 @@ /* * OMAP4 PRM module functions * - * Copyright (C) 2010 Texas Instruments, Inc. + * Copyright (C) 2011 Texas Instruments, Inc. * Copyright (C) 2010 Nokia Corporation * Benoît Cousson * Paul Walmsley @@ -24,12 +24,6 @@ #include "prm44xx.h" #include "prm-regbits-44xx.h" -/* - * Address offset (in bytes) between the reset control and the reset - * status registers: 4 bytes on OMAP4 - */ -#define OMAP4_RST_CTRL_ST_OFFSET 4 - /* PRM low-level functions */ /* Read a register in a CM/PRM instance in the PRM module */ @@ -94,91 +88,6 @@ u32 omap4_prm_clear_inst_reg_bits(u32 bits, s16 inst, s16 reg) return omap4_prm_rmw_inst_reg_bits(bits, 0x0, inst, reg); } -/** - * omap4_prm_is_hardreset_asserted - read the HW reset line state of - * submodules contained in the hwmod module - * @rstctrl_reg: RM_RSTCTRL register address for this module - * @shift: register bit shift corresponding to the reset line to check - * - * Returns 1 if the (sub)module hardreset line is currently asserted, - * 0 if the (sub)module hardreset line is not currently asserted, or - * -EINVAL upon parameter error. - */ -int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift) -{ - if (!cpu_is_omap44xx() || !rstctrl_reg) - return -EINVAL; - - return omap4_prm_read_bits_shift(rstctrl_reg, (1 << shift)); -} - -/** - * omap4_prm_assert_hardreset - assert the HW reset line of a submodule - * @rstctrl_reg: RM_RSTCTRL register address for this module - * @shift: register bit shift corresponding to the reset line to assert - * - * Some IPs like dsp, ipu or iva contain processors that require an HW - * reset line to be asserted / deasserted in order to fully enable the - * IP. These modules may have multiple hard-reset lines that reset - * different 'submodules' inside the IP block. This function will - * place the submodule into reset. Returns 0 upon success or -EINVAL - * upon an argument error. - */ -int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift) -{ - u32 mask; - - if (!cpu_is_omap44xx() || !rstctrl_reg) - return -EINVAL; - - mask = 1 << shift; - omap4_prm_rmw_reg_bits(mask, mask, rstctrl_reg); - - return 0; -} - -/** - * omap4_prm_deassert_hardreset - deassert a submodule hardreset line and wait - * @rstctrl_reg: RM_RSTCTRL register address for this module - * @shift: register bit shift corresponding to the reset line to deassert - * - * Some IPs like dsp, ipu or iva contain processors that require an HW - * reset line to be asserted / deasserted in order to fully enable the - * IP. These modules may have multiple hard-reset lines that reset - * different 'submodules' inside the IP block. This function will - * take the submodule out of reset and wait until the PRCM indicates - * that the reset has completed before returning. Returns 0 upon success or - * -EINVAL upon an argument error, -EEXIST if the submodule was already out - * of reset, or -EBUSY if the submodule did not exit reset promptly. - */ -int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift) -{ - u32 mask; - void __iomem *rstst_reg; - int c; - - if (!cpu_is_omap44xx() || !rstctrl_reg) - return -EINVAL; - - rstst_reg = rstctrl_reg + OMAP4_RST_CTRL_ST_OFFSET; - - mask = 1 << shift; - - /* Check the current status to avoid de-asserting the line twice */ - if (omap4_prm_read_bits_shift(rstctrl_reg, mask) == 0) - return -EEXIST; - - /* Clear the reset status by writing 1 to the status bit */ - omap4_prm_rmw_reg_bits(0xffffffff, mask, rstst_reg); - /* de-assert the reset control line */ - omap4_prm_rmw_reg_bits(mask, 0, rstctrl_reg); - /* wait the status to be set */ - omap_test_timeout(omap4_prm_read_bits_shift(rstst_reg, mask), - MAX_MODULE_HARDRESET_WAIT, c); - - return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; -} - void omap4_prm_global_warm_sw_reset(void) { u32 v; diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h index 6e53120fd6cb..3732e026a22f 100644 --- a/arch/arm/mach-omap2/prm44xx.h +++ b/arch/arm/mach-omap2/prm44xx.h @@ -755,10 +755,6 @@ extern u32 omap4_prm_set_inst_reg_bits(u32 bits, s16 inst, s16 idx); extern u32 omap4_prm_clear_inst_reg_bits(u32 bits, s16 inst, s16 idx); extern u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask); -extern int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift); -extern int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift); -extern int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift); - extern void omap4_prm_global_warm_sw_reset(void); # endif diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c index a30324297278..35e02aac1de9 100644 --- a/arch/arm/mach-omap2/prminst44xx.c +++ b/arch/arm/mach-omap2/prminst44xx.c @@ -2,6 +2,7 @@ * OMAP4 PRM instance functions * * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2011 Texas Instruments, Inc. * Paul Walmsley * * This program is free software; you can redistribute it and/or modify @@ -53,7 +54,7 @@ void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx) /* Read-modify-write a register in PRM. Caller must lock */ u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst, - s16 idx) + u16 idx) { u32 v; @@ -64,3 +65,93 @@ u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst, return v; } + +/* + * Address offset (in bytes) between the reset control and the reset + * status registers: 4 bytes on OMAP4 + */ +#define OMAP4_RST_CTRL_ST_OFFSET 4 + +/** + * omap4_prminst_is_hardreset_asserted - read the HW reset line state of + * submodules contained in the hwmod module + * @rstctrl_reg: RM_RSTCTRL register address for this module + * @shift: register bit shift corresponding to the reset line to check + * + * Returns 1 if the (sub)module hardreset line is currently asserted, + * 0 if the (sub)module hardreset line is not currently asserted, or + * -EINVAL upon parameter error. + */ +int omap4_prminst_is_hardreset_asserted(u8 shift, u8 part, s16 inst, + u16 rstctrl_offs) +{ + u32 v; + + v = omap4_prminst_read_inst_reg(part, inst, rstctrl_offs); + v &= 1 << shift; + v >>= shift; + + return v; +} + +/** + * omap4_prminst_assert_hardreset - assert the HW reset line of a submodule + * @rstctrl_reg: RM_RSTCTRL register address for this module + * @shift: register bit shift corresponding to the reset line to assert + * + * Some IPs like dsp, ipu or iva contain processors that require an HW + * reset line to be asserted / deasserted in order to fully enable the + * IP. These modules may have multiple hard-reset lines that reset + * different 'submodules' inside the IP block. This function will + * place the submodule into reset. Returns 0 upon success or -EINVAL + * upon an argument error. + */ +int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst, + u16 rstctrl_offs) +{ + u32 mask = 1 << shift; + + omap4_prminst_rmw_inst_reg_bits(mask, mask, part, inst, rstctrl_offs); + + return 0; +} + +/** + * omap4_prminst_deassert_hardreset - deassert a submodule hardreset line and + * wait + * @rstctrl_reg: RM_RSTCTRL register address for this module + * @shift: register bit shift corresponding to the reset line to deassert + * + * Some IPs like dsp, ipu or iva contain processors that require an HW + * reset line to be asserted / deasserted in order to fully enable the + * IP. These modules may have multiple hard-reset lines that reset + * different 'submodules' inside the IP block. This function will + * take the submodule out of reset and wait until the PRCM indicates + * that the reset has completed before returning. Returns 0 upon success or + * -EINVAL upon an argument error, -EEXIST if the submodule was already out + * of reset, or -EBUSY if the submodule did not exit reset promptly. + */ +int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst, + u16 rstctrl_offs) +{ + int c; + u32 mask = 1 << shift; + u16 rstst_offs = rstctrl_offs + OMAP4_RST_CTRL_ST_OFFSET; + + /* Check the current status to avoid de-asserting the line twice */ + if (omap4_prminst_is_hardreset_asserted(shift, part, inst, + rstctrl_offs) == 0) + return -EEXIST; + + /* Clear the reset status by writing 1 to the status bit */ + omap4_prminst_rmw_inst_reg_bits(0xffffffff, mask, part, inst, + rstst_offs); + /* de-assert the reset control line */ + omap4_prminst_rmw_inst_reg_bits(mask, 0, part, inst, rstctrl_offs); + /* wait the status to be set */ + omap_test_timeout(omap4_prminst_is_hardreset_asserted(shift, part, inst, + rstst_offs), + MAX_MODULE_HARDRESET_WAIT, c); + + return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; +} diff --git a/arch/arm/mach-omap2/prminst44xx.h b/arch/arm/mach-omap2/prminst44xx.h index 02dd66ddda8b..c14ae294cd54 100644 --- a/arch/arm/mach-omap2/prminst44xx.h +++ b/arch/arm/mach-omap2/prminst44xx.h @@ -2,6 +2,7 @@ * OMAP4 Power/Reset Management (PRM) function prototypes * * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2011 Texas Instruments, Inc. * Paul Walmsley * * This program is free software; you can redistribute it and/or modify @@ -18,8 +19,15 @@ extern u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx); extern void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx); extern u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, - s16 inst, s16 idx); + s16 inst, u16 idx); extern void omap4_prm_global_warm_sw_reset(void); +extern int omap4_prminst_is_hardreset_asserted(u8 shift, u8 part, s16 inst, + u16 rstctrl_offs); +extern int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst, + u16 rstctrl_offs); +extern int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst, + u16 rstctrl_offs); + #endif diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index fc54355de729..9ef4424366d2 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -2,6 +2,7 @@ * omap_hwmod macros, structures * * Copyright (C) 2009-2011 Nokia Corporation + * Copyright (C) 2011 Texas Instruments, Inc. * Paul Walmsley * * Created in collaboration with (alphabetical order): Benoît Cousson, @@ -361,7 +362,7 @@ struct omap_hwmod_omap2_prcm { */ struct omap_hwmod_omap4_prcm { u16 clkctrl_offs; - void __iomem *rstctrl_reg; + u16 rstctrl_offs; u8 submodule_wkdep_bit; }; |