diff options
| -rw-r--r-- | Documentation/scsi/00-INDEX | 2 | ||||
| -rw-r--r-- | Documentation/scsi/ibmmca.txt | 1402 | ||||
| -rw-r--r-- | Documentation/scsi/scsi-parameters.txt | 6 | ||||
| -rw-r--r-- | Documentation/scsi/scsi_mid_low_api.txt | 2 | ||||
| -rw-r--r-- | drivers/scsi/Kconfig | 83 | ||||
| -rw-r--r-- | drivers/scsi/Makefile | 2 | ||||
| -rw-r--r-- | drivers/scsi/aha1542.c | 66 | ||||
| -rw-r--r-- | drivers/scsi/fd_mcs.c | 1354 | ||||
| -rw-r--r-- | drivers/scsi/ibmmca.c | 2379 | ||||
| -rw-r--r-- | drivers/scsi/sim710.c | 124 |
10 files changed, 6 insertions, 5414 deletions
diff --git a/Documentation/scsi/00-INDEX b/Documentation/scsi/00-INDEX index b7dd6502bec5..9b0787f965e9 100644 --- a/Documentation/scsi/00-INDEX +++ b/Documentation/scsi/00-INDEX @@ -56,8 +56,6 @@ g_NCR5380.txt - info on driver for NCR5380 and NCR53c400 based adapters hptiop.txt - HIGHPOINT ROCKETRAID 3xxx RAID DRIVER -ibmmca.txt - - info on driver for IBM adapters with MCA bus in2000.txt - info on in2000 driver libsas.txt diff --git a/Documentation/scsi/ibmmca.txt b/Documentation/scsi/ibmmca.txt deleted file mode 100644 index ac41a9fcac77..000000000000 --- a/Documentation/scsi/ibmmca.txt +++ /dev/null @@ -1,1402 +0,0 @@ - - -=< The IBM Microchannel SCSI-Subsystem >=- - - for the IBM PS/2 series - - Low Level Software-Driver for Linux - - Copyright (c) 1995 Strom Systems, Inc. under the terms of the GNU - General Public License. Originally written by Martin Kolinek, December 1995. - Officially modified and maintained by Michael Lang since January 1999. - - Version 4.0a - - Last update: January 3, 2001 - - Before you Start - ---------------- - This is the common README.ibmmca file for all driver releases of the - IBM MCA SCSI driver for Linux. Please note, that driver releases 4.0 - or newer do not work with kernel versions older than 2.4.0, while driver - versions older than 4.0 do not work with kernels 2.4.0 or later! If you - try to compile your kernel with the wrong driver source, the - compilation is aborted and you get a corresponding error message. This is - no bug in the driver; it prevents you from using the wrong source code - with the wrong kernel version. - - Authors of this Driver - ---------------------- - - Chris Beauregard (improvement of the SCSI-device mapping by the driver) - - Martin Kolinek (origin, first release of this driver) - - Klaus Kudielka (multiple SCSI-host management/detection, adaption to - Linux Kernel 2.1.x, module support) - - Michael Lang (assigning original pun/lun mapping, dynamical ldn - assignment, rewritten adapter detection, this file, - patches, official driver maintenance and subsequent - debugging, related with the driver) - - Table of Contents - ----------------- - 1 Abstract - 2 Driver Description - 2.1 IBM SCSI-Subsystem Detection - 2.2 Physical Units, Logical Units, and Logical Devices - 2.3 SCSI-Device Recognition and dynamical ldn Assignment - 2.4 SCSI-Device Order - 2.5 Regular SCSI-Command-Processing - 2.6 Abort & Reset Commands - 2.7 Disk Geometry - 2.8 Kernel Boot Option - 2.9 Driver Module Support - 2.10 Multiple Hostadapter Support - 2.11 /proc/scsi-Filesystem Information - 2.12 /proc/mca-Filesystem Information - 2.13 Supported IBM SCSI-Subsystems - 2.14 Linux Kernel Versions - 3 Code History - 4 To do - 5 Users' Manual - 5.1 Commandline Parameters - 5.2 Troubleshooting - 5.3 Bug reports - 5.4 Support WWW-page - 6 References - 7 Credits to - 7.1 People - 7.2 Sponsors & Supporters - 8 Trademarks - 9 Disclaimer - - * * * - - 1 Abstract - ---------- - This README-file describes the IBM SCSI-subsystem low level driver for - Linux. The descriptions which were formerly kept in the source code have - been taken out of this file to simplify the codes readability. The driver - description has been updated, as most of the former description was already - quite outdated. The history of the driver development is also kept inside - here. Multiple historical developments have been summarized to shorten the - text size a bit. At the end of this file you can find a small manual for - this driver and hints to get it running on your machine. - - 2 Driver Description - -------------------- - 2.1 IBM SCSI-Subsystem Detection - -------------------------------- - This is done in the ibmmca_detect() function. It first checks, if the - Microchannel-bus support is enabled, as the IBM SCSI-subsystem needs the - Microchannel. In a next step, a free interrupt is chosen and the main - interrupt handler is connected to it to handle answers of the SCSI- - subsystem(s). If the F/W SCSI-adapter is forced by the BIOS to use IRQ11 - instead of IRQ14, IRQ11 is used for the IBM SCSI-2 F/W adapter. In a - further step it is checked, if the adapter gets detected by force from - the kernel commandline, where the I/O port and the SCSI-subsystem id can - be specified. The next step checks if there is an integrated SCSI-subsystem - installed. This register area is fixed through all IBM PS/2 MCA-machines - and appears as something like a virtual slot 10 of the MCA-bus. On most - PS/2 machines, the POS registers of slot 10 are set to 0xff or 0x00 if not - integrated SCSI-controller is available. But on certain PS/2s, like model - 9595, this slot 10 is used to store other information which at earlier - stage confused the driver and resulted in the detection of some ghost-SCSI. - If POS-register 2 and 3 are not 0x00 and not 0xff, but all other POS - registers are either 0xff or 0x00, there must be an integrated SCSI- - subsystem present and it will be registered as IBM Integrated SCSI- - Subsystem. The next step checks, if there is a slot-adapter installed on - the MCA-bus. To get this, the first two POS-registers, that represent the - adapter ID are checked. If they fit to one of the ids, stored in the - adapter list, a SCSI-subsystem is assumed to be found in a slot and will be - registered. This check is done through all possible MCA-bus slots to allow - more than one SCSI-adapter to be present in the PS/2-system and this is - already the first point of problems. Looking into the technical reference - manual for the IBM PS/2 common interfaces, the POS2 register must have - different interpretation of its single bits to avoid overlapping I/O - regions. While one can assume, that the integrated subsystem has a fix - I/O-address at 0x3540 - 0x3547, further installed IBM SCSI-adapters must - use a different I/O-address. This is expressed by bit 1 to 3 of POS2 - (multiplied by 8 + 0x3540). Bits 2 and 3 are reserved for the integrated - subsystem, but not for the adapters! The following list shows, how the - bits of POS2 and POS3 should be interpreted. - - The POS2-register of all PS/2 models' integrated SCSI-subsystems has the - following interpretation of bits: - Bit 7 - 4 : Chip Revision ID (Release) - Bit 3 - 2 : Reserved - Bit 1 : 8k NVRAM Disabled - Bit 0 : Chip Enable (EN-Signal) - The POS3-register is interpreted as follows (for most IBM SCSI-subsys.): - Bit 7 - 5 : SCSI ID - Bit 4 - 0 : Reserved = 0 - The slot-adapters have different interpretation of these bits. The IBM SCSI - adapter (w/Cache) and the IBM SCSI-2 F/W adapter use the following - interpretation of the POS2 register: - Bit 7 - 4 : ROM Segment Address Select - Bit 3 - 1 : Adapter I/O Address Select (*8+0x3540) - Bit 0 : Adapter Enable (EN-Signal) - and for the POS3 register: - Bit 7 - 5 : SCSI ID - Bit 4 : Fairness Enable (SCSI ID3 f. F/W) - Bit 3 - 0 : Arbitration Level - The most modern product of the series is the IBM SCSI-2 F/W adapter, it - allows dual-bus SCSI and SCSI-wide addressing, which means, PUNs may be - between 0 and 15. Here, Bit 4 is the high-order bit of the 4-bit wide - adapter PUN expression. In short words, this means, that IBM PS/2 machines - can only support 1 single integrated subsystem by default. Additional - slot-adapters get ports assigned by the automatic configuration tool. - - One day I found a patch in ibmmca_detect(), forcing the I/O-address to be - 0x3540 for integrated SCSI-subsystems, there was a remark placed, that on - integrated IBM SCSI-subsystems of model 56, the POS2 register was showing 5. - This means, that really for these models, POS2 has to be interpreted - sticking to the technical reference guide. In this case, the bit 2 (4) is - a reserved bit and may not be interpreted. These differences between the - adapters and the integrated controllers are taken into account by the - detection routine of the driver on from version >3.0g. - - Every time, a SCSI-subsystem is discovered, the ibmmca_register() function - is called. This function checks first, if the requested area for the I/O- - address of this SCSI-subsystem is still available and assigns this I/O- - area to the SCSI-subsystem. There are always 8 sequential I/O-addresses - taken for each individual SCSI-subsystem found, which are: - - Offset Type Permissions - 0 Command Interface Register 1 Read/Write - 1 Command Interface Register 2 Read/Write - 2 Command Interface Register 3 Read/Write - 3 Command Interface Register 4 Read/Write - 4 Attention Register Read/Write - 5 Basic Control Register Read/Write - 6 Interrupt Status Register Read - 7 Basic Status Register Read - - After the I/O-address range is assigned, the host-adapter is assigned - to a local structure which keeps all adapter information needed for the - driver itself and the mid- and higher-level SCSI-drivers. The SCSI pun/lun - and the adapters' ldn tables are initialized and get probed afterwards by - the check_devices() function. If no further adapters are found, - ibmmca_detect() quits. - - 2.2 Physical Units, Logical Units, and Logical Devices - ------------------------------------------------------ - There can be up to 56 devices on the SCSI bus (besides the adapter): - there are up to 7 "physical units" (each identified by physical unit - number or pun, also called the scsi id, this is the number you select - with hardware jumpers), and each physical unit can have up to 8 - "logical units" (each identified by logical unit number, or lun, - between 0 and 7). The IBM SCSI-2 F/W adapter offers this on up to two - busses and provides support for 30 logical devices at the same time, where - in wide-addressing mode you can have 16 puns with 32 luns on each device. - This section describes the handling of devices on non-F/W adapters. - Just imagine, that you can have 16 * 32 = 512 devices on a F/W adapter - which means a lot of possible devices for such a small machine. - - Typically the adapter has pun=7, so puns of other physical units - are between 0 and 6(15). On a wide-adapter a pun higher than 7 is - possible, but is normally not used. Almost all physical units have only - one logical unit, with lun=0. A CD-ROM jukebox would be an example of a - physical unit with more than one logical unit. - - The embedded microprocessor of the IBM SCSI-subsystem hides the complex - two-dimensional (pun,lun) organization from the operating system. - When the machine is powered-up (or rebooted), the embedded microprocessor - checks, on its own, all 56 possible (pun,lun) combinations, and the first - 15 devices found are assigned into a one-dimensional array of so-called - "logical devices", identified by "logical device numbers" or ldn. The last - ldn=15 is reserved for the subsystem itself. Wide adapters may have - to check up to 15 * 8 = 120 pun/lun combinations. - - 2.3 SCSI-Device Recognition and Dynamical ldn Assignment - -------------------------------------------------------- - One consequence of information hiding is that the real (pun,lun) - numbers are also hidden. The two possibilities to get around this problem - are to offer fake pun/lun combinations to the operating system or to - delete the whole mapping of the adapter and to reassign the ldns, using - the immediate assign command of the SCSI-subsystem for probing through - all possible pun/lun combinations. An ldn is a "logical device number" - which is used by IBM SCSI-subsystems to access some valid SCSI-device. - At the beginning of the development of this driver, the following approach - was used: - - First, the driver checked the ldn's (0 to 6) to find out which ldn's - have devices assigned. This was done by the functions check_devices() and - device_exists(). The interrupt handler has a special paragraph of code - (see local_checking_phase_flag) to assist in the checking. Assume, for - example, that three logical devices were found assigned at ldn 0, 1, 2. - These are presented to the upper layer of Linux SCSI driver - as devices with bogus (pun, lun) equal to (0,0), (1,0), (2,0). - On the other hand, if the upper layer issues a command to device - say (4,0), this driver returns DID_NO_CONNECT error. - - In a second step of the driver development, the following improvement has - been applied: The first approach limited the number of devices to 7, far - fewer than the 15 that it could use, then it just mapped ldn -> - (ldn/8,ldn%8) for pun,lun. We ended up with a real mishmash of puns - and luns, but it all seemed to work. - - The latest development, which is implemented from the driver version 3.0 - and later, realizes the device recognition in the following way: - The physical SCSI-devices on the SCSI-bus are probed via immediate_assign- - and device_inquiry-commands, that is all implemented in a completely new - made check_devices() subroutine. This delivers an exact map of the physical - SCSI-world that is now stored in the get_scsi[][]-array. This means, - that the once hidden pun,lun assignment is now known to this driver. - It no longer believes in default-settings of the subsystem and maps all - ldns to existing pun,lun "by foot". This assures full control of the ldn - mapping and allows dynamical remapping of ldns to different pun,lun, if - there are more SCSI-devices installed than ldns available (n>15). The - ldns from 0 to 6 get 'hardwired' by this driver to puns 0 to 7 at lun=0, - excluding the pun of the subsystem. This assures, that at least simple - SCSI-installations have optimum access-speed and are not touched by - dynamical remapping. The ldns 7 to 14 are put to existing devices with - lun>0 or to non-existing devices, in order to satisfy the subsystem, if - there are less than 15 SCSI-devices connected. In the case of more than 15 - devices, the dynamical mapping goes active. If the get_scsi[][] reports a - device to be existent, but it has no ldn assigned, it gets an ldn out of 7 - to 14. The numbers are assigned in cyclic order, therefore it takes 8 - dynamical reassignments on the SCSI-devices until a certain device - loses its ldn again. This assures that dynamical remapping is avoided - during intense I/O between up to 15 SCSI-devices (means pun,lun - combinations). A further advantage of this method is that people who - build their kernel without probing on all luns will get what they expect, - because the driver just won't assign everything with lun>0 when - multiple lun probing is inactive. - - 2.4 SCSI-Device Order - --------------------- - Because of the now correct recognition of physical pun,lun, and - their report to mid-level- and higher-level-drivers, the new reported puns - can be different from the old, faked puns. Therefore, Linux will eventually - change /dev/sdXXX assignments and prompt you for corrupted superblock - repair on boottime. In this case DO NOT PANIC, YOUR DISKS ARE STILL OK!!! - You have to reboot (CTRL-D) with an old kernel and set the /etc/fstab-file - entries right. After that, the system should come up as errorfree as before. - If your boot-partition is not coming up, also edit the /etc/lilo.conf-file - in a Linux session booted on old kernel and run lilo before reboot. Check - lilo.conf anyway to get boot on other partitions with foreign OSes right - again. But there exists a feature of this driver that allows you to change - the assignment order of the SCSI-devices by flipping the PUN-assignment. - See the next paragraph for a description. - - The problem for this is, that Linux does not assign the SCSI-devices in the - way as described in the ANSI-SCSI-standard. Linux assigns /dev/sda to - the device with at minimum id 0. But the first drive should be at id 6, - because for historical reasons, drive at id 6 has, by hardware, the highest - priority and a drive at id 0 the lowest. IBM was one of the rare producers, - where the BIOS assigns drives belonging to the ANSI-SCSI-standard. Most - other producers' BIOS does not (I think even Adaptec-BIOS). The - IBMMCA_SCSI_ORDER_STANDARD flag, which you set while configuring the - kernel enables to choose the preferred way of SCSI-device-assignment. - Defining this flag would result in Linux determining the devices in the - same order as DOS and OS/2 does on your MCA-machine. This is also standard - on most industrial computers and OSes, like e.g. OS-9. Leaving this flag - undefined will get your devices ordered in the default way of Linux. See - also the remarks of Chris Beauregard from Dec 15, 1997 and the followups - in section 3. - - 2.5 Regular SCSI-Command-Processing - ----------------------------------- - Only three functions get involved: ibmmca_queuecommand(), issue_cmd(), - and interrupt_handler(). - - The upper layer issues a scsi command by calling function - ibmmca_queuecommand(). This function fills a "subsystem control block" - (scb) and calls a local function issue_cmd(), which writes a scb - command into subsystem I/O ports. Once the scb command is carried out, - the interrupt_handler() is invoked. If a device is determined to be - existent and it has not assigned any ldn, it gets one dynamically. - For this, the whole stuff is done in ibmmca_queuecommand(). - - 2.6 Abort & Reset Commands - -------------------------- - These are implemented with busy waiting for interrupt to arrive. - ibmmca_reset() and ibmmca_abort() do not work sufficiently well - up to now and need still a lot of development work. This seems - to be a problem with other low-level SCSI drivers too, however - this should be no excuse. - - 2.7 Disk Geometry - ----------------- - The ibmmca_biosparams() function should return the same disk geometry - as the bios. This is needed for fdisk, etc. The returned geometry is - certainly correct for disks smaller than 1 gigabyte. In the meantime, - it has been proved, that this works fine even with disks larger than - 1 gigabyte. - - 2.8 Kernel Boot Option - ---------------------- - The function ibmmca_scsi_setup() is called if option ibmmcascsi=n - is passed to the kernel. See file linux/init/main.c for details. - - 2.9 Driver Module Support - ------------------------- - Is implemented and tested by K. Kudielka. This could probably not work - on kernels <2.1.0. - - 2.10 Multiple Hostadapter Support - --------------------------------- - This driver supports up to eight interfaces of type IBM-SCSI-Subsystem. - Integrated-, and MCA-adapters are automatically recognized. Unrecognizable - IBM-SCSI-Subsystem interfaces can be specified as kernel-parameters. - - 2.11 /proc/scsi-Filesystem Information - -------------------------------------- - Information about the driver condition is given in - /proc/scsi/ibmmca/<host_no>. ibmmca_proc_info() provides this information. - - This table is quite informative for interested users. It shows the load - of commands on the subsystem and whether you are running the bypassed - (software) or integrated (hardware) SCSI-command set (see below). The - amount of accesses is shown. Read, write, modeselect is shown separately - in order to help debugging problems with CD-ROMs or tapedrives. - - The following table shows the list of 15 logical device numbers, that are - used by the SCSI-subsystem. The load on each ldn is shown in the table, - again, read and write commands are split. The last column shows the amount - of reassignments, that have been applied to the ldns, if you have more than - 15 pun/lun combinations available on the SCSI-bus. - - The last two tables show the pun/lun map and the positions of the ldns - on this pun/lun map. This may change during operation, when a ldn is - reassigned to another pun/lun combination. If the necessity for dynamical - assignments is set to 'no', the ldn structure keeps static. - - 2.12 /proc/mca-Filesystem Information - ------------------------------------- - The slot-file contains all default entries and in addition chip and I/O- - address information of the SCSI-subsystem. This information is provided - by ibmmca_getinfo(). - - 2.13 Supported IBM SCSI-Subsystems - ---------------------------------- - The following IBM SCSI-subsystems are supported by this driver: - - - IBM Fast/Wide SCSI-2 Adapter - - IBM 7568 Industrial Computer SCSI Adapter w/Cache - - IBM Expansion Unit SCSI Controller - - IBM SCSI Adapter w/Cache - - IBM SCSI Adapter - - IBM Integrated SCSI Controller - - All clones, 100% compatible with the chipset and subsystem command - system of IBM SCSI-adapters (forced detection) - - 2.14 Linux Kernel Versions - -------------------------- - The IBM SCSI-subsystem low level driver is prepared to be used with - all versions of Linux between 2.0.x and 2.4.x. The compatibility checks - are fully implemented up from version 3.1e of the driver. This means, that - you just need the latest ibmmca.h and ibmmca.c file and copy it in the - linux/drivers/scsi directory. The code is automatically adapted during - kernel compilation. This is different from kernel 2.4.0! Here version - 4.0 or later of the driver must be used for kernel 2.4.0 or later. Version - 4.0 or later does not work together with older kernels! Driver versions - older than 4.0 do not work together with kernel 2.4.0 or later. They work - on all older kernels. - - 3 Code History - -------------- - Jan 15 1996: First public release. - - Martin Kolinek - - Jan 23 1996: Scrapped code which reassigned scsi devices to logical - device numbers. Instead, the existing assignment (created - when the machine is powered-up or rebooted) is used. - A side effect is that the upper layer of Linux SCSI - device driver gets bogus scsi ids (this is benign), - and also the hard disks are ordered under Linux the - same way as they are under dos (i.e., C: disk is sda, - D: disk is sdb, etc.). - - Martin Kolinek - - I think that the CD-ROM is now detected only if a CD is - inside CD_ROM while Linux boots. This can be fixed later, - once the driver works on all types of PS/2's. - - Martin Kolinek - - Feb 7 1996: Modified biosparam function. Fixed the CD-ROM detection. - For now, devices other than harddisk and CD_ROM are - ignored. Temporarily modified abort() function - to behave like reset(). - - Martin Kolinek - - Mar 31 1996: The integrated scsi subsystem is correctly found - in PS/2 models 56,57, but not in model 76. Therefore - the ibmmca_scsi_setup() function has been added today. - This function allows the user to force detection of - scsi subsystem. The kernel option has format - ibmmcascsi=n - where n is the scsi_id (pun) of the subsystem. Most likely, n is 7. - - Martin Kolinek - - Aug 21 1996: Modified the code which maps ldns to (pun,0). It was - insufficient for those of us with CD-ROM changers. - - Chris Beauregard - - Dec 14 1996: More improvements to the ldn mapping. See check_devices - for details. Did more fiddling with the integrated SCSI detection, - but I think it's ultimately hopeless without actually testing the - model of the machine. The 56, 57, 76 and 95 (ultimedia) all have - different integrated SCSI register configurations. However, the 56 - and 57 are the only ones that have problems with forced detection. - - Chris Beauregard - - Mar 8-16 1997: Modified driver to run as a module and to support - multiple adapters. A structure, called ibmmca_hostdata, is now - present, containing all the variables, that were once only - available for one single adapter. The find_subsystem-routine has vanished. - The hardware recognition is now done in ibmmca_detect directly. - This routine checks for presence of MCA-bus, checks the interrupt - level and continues with checking the installed hardware. - Certain PS/2-models do not recognize a SCSI-subsystem automatically. - Hence, the setup defined by command-line-parameters is checked first. - Thereafter, the routine probes for an integrated SCSI-subsystem. - Finally, adapters are checked. This method has the advantage to cover all - possible combinations of multiple SCSI-subsystems on one MCA-board. Up to - eight SCSI-subsystems can be recognized and announced to the upper-level - drivers with this improvement. A set of defines made changes to other - routines as small as possible. - - Klaus Kudielka - - May 30 1997: (v1.5b) - 1) SCSI-command capability enlarged by the recognition of MODE_SELECT. - This needs the RD-Bit to be disabled on IM_OTHER_SCSI_CMD_CMD which - allows data to be written from the system to the device. It is a - necessary step to be allowed to set blocksize of SCSI-tape-drives and - the tape-speed, without confusing the SCSI-Subsystem. - 2) The recognition of a tape is included in the check_devices routine. - This is done by checking for TYPE_TAPE, that is already defined in - the kernel-scsi-environment. The markup of a tape is done in the - global ldn_is_tape[] array. If the entry on index ldn - is 1, there is a tapedrive connected. - 3) The ldn_is_tape[] array is necessary to distinguish between tape- and - other devices. Fixed blocklength devices should not cause a problem - with the SCB-command for read and write in the ibmmca_queuecommand - subroutine. Therefore, I only derivate the READ_XX, WRITE_XX for - the tape-devices, as recommended by IBM in this Technical Reference, - mentioned below. (IBM recommends to avoid using the read/write of the - subsystem, but the fact was, that read/write causes a command error from - the subsystem and this causes kernel-panic.) - 4) In addition, I propose to use the ldn instead of a fix char for the - display of PS2_DISK_LED_ON(). On 95, one can distinguish between the - devices that are accessed. It shows activity and easyfies debugging. - The tape-support has been tested with a SONY SDT-5200 and a HP DDS-2 - (I do not know yet the type). Optimization and CD-ROM audio-support, - I am working on ... - - Michael Lang - - June 19 1997: (v1.6b) - 1) Submitting the extra-array ldn_is_tape[] -> to the local ld[] - device-array. - 2) CD-ROM Audio-Play seems to work now. - 3) When using DDS-2 (120M) DAT-Tapes, mtst shows still density-code - 0x13 for ordinary DDS (61000 BPM) instead 0x24 for DDS-2. This appears - also on Adaptec 2940 adaptor in a PCI-System. Therefore, I assume that - the problem is independent of the low-level-driver/bus-architecture. - 4) Hexadecimal ldn on PS/2-95 LED-display. - 5) Fixing of the PS/2-LED on/off that it works right with tapedrives and - does not confuse the disk_rw_in_progress counter. - - Michael Lang - - June 21 1997: (v1.7b) - 1) Adding of a proc_info routine to inform in /proc/scsi/ibmmca/<host> the - outer-world about operational load statistics on the different ldns, - seen by the driver. Everybody that has more than one IBM-SCSI should - test this, because I only have one and cannot see what happens with more - than one IBM-SCSI hosts. - 2) Definition of a driver version-number to have a better recognition of - the source when there are existing too much releases that may confuse - the user, when reading about release-specific problems. Up to know, - I calculated the version-number to be 1.7. Because we are in BETA-test - yet, it is today 1.7b. - 3) Sorry for the heavy bug I programmed on June 19 1997! After that, the - CD-ROM did not work any more! The C7-command was a fake impression - I got while programming. Now, the READ and WRITE commands for CD-ROM are - no longer running over the subsystem, but just over - IM_OTHER_SCSI_CMD_CMD. On my observations (PS/2-95), now CD-ROM mounts - much faster(!) and hopefully all fancy multimedia-functions, like direct - digital recording from audio-CDs also work. (I tried it with cdda2wav - from the cdwtools-package and it filled up the harddisk immediately :-).) - To easify boolean logics, a further local device-type in ld[], called - is_cdrom has been included. - 4) If one uses a SCSI-device of unsupported type/commands, one - immediately runs into a kernel-panic caused by Command Error. To better - understand which SCSI-command caused the problem, I extended this - specific panic-message slightly. - - Michael Lang - - June 25 1997: (v1.8b) - 1) Some cosmetic changes for the handling of SCSI-device-types. - Now, also CD-Burners / WORMs and SCSI-scanners should work. For - MO-drives I have no experience, therefore not yet supported. - In logical_devices I changed from different type-variables to one - called 'device_type' where the values, corresponding to scsi.h, - of a SCSI-device are stored. - 2) There existed a small bug, that maps a device, coming after a SCSI-tape - wrong. Therefore, e.g. a CD-ROM changer would have been mapped wrong - -> problem removed. - 3) Extension of the logical_device structure. Now it contains also device, - vendor and revision-level of a SCSI-device for internal usage. - - Michael Lang - - June 26-29 1997: (v2.0b) - 1) The release number 2.0b is necessary because of the completely new done - recognition and handling of SCSI-devices with the adapter. As I got - from Chris the hint, that the subsystem can reassign ldns dynamically, - I remembered this immediate_assign-command, I found once in the handbook. - Now, the driver first kills all ldn assignments that are set by default - on the SCSI-subsystem. After that, it probes on all puns and luns for - devices by going through all combinations with immediate_assign and - probing for devices, using device_inquiry. The found physical(!) pun,lun - structure is stored in get_scsi[][] as device types. This is followed - by the assignment of all ldns to existing SCSI-devices. If more ldns - than devices are available, they are assigned to non existing pun,lun - combinations to satisfy the adapter. With this, the dynamical mapping - was possible to implement. (For further info see the text in the - source code and in the description below. Read the description - below BEFORE installing this driver on your system!) - 2) Changed the name IBMMCA_DRIVER_VERSION to IBMMCA_SCSI_DRIVER_VERSION. - 3) The LED-display shows on PS/2-95 no longer the ldn, but the SCSI-ID - (pun) of the accessed SCSI-device. This is now senseful, because the - pun known within the driver is exactly the pun of the physical device - and no longer a fake one. - 4) The /proc/scsi/ibmmca/<host_no> consists now of the first part, where - hit-statistics of ldns is shown and a second part, where the maps of - physical and logical SCSI-devices are displayed. This could be very - interesting, when one is using more than 15 SCSI-devices in order to - follow the dynamical remapping of ldns. - - Michael Lang - - June 26-29 1997: (v2.0b-1) - 1) I forgot to switch the local_checking_phase_flag to 1 and back to 0 - in the dynamical remapping part in ibmmca_queuecommand for the - device_exist routine. Sorry. - - Michael Lang - - July 1-13 1997: (v3.0b,c) - 1) Merging of the driver-developments of Klaus Kudielka and Michael Lang - in order to get a optimum and unified driver-release for the - IBM-SCSI-Subsystem-Adapter(s). - For people, using the Kernel-release >=2.1.0, module-support should - be no problem. For users, running under <2.1.0, module-support may not - work, because the methods have changed between 2.0.x and 2.1.x. - 2) Added some more effective statistics for /proc-output. - 3) Change typecasting at necessary points from (unsigned long) to - virt_to_bus(). - 4) Included #if... at special points to have specific adaption of the - driver to kernel 2.0.x and 2.1.x. It should therefore also run with - later releases. - 5) Magneto-Optical drives and medium-changers are also recognized, now. - Therefore, we have a completely gapfree recognition of all SCSI- - device-types, that are known by Linux up to kernel 2.1.31. - 6) The flag SCSI_IBMMCA_DEV_RESET has been inserted. If it is set within - the configuration, each connected SCSI-device will get a reset command - during boottime. This can be necessary for some special SCSI-devices. - This flag should be included in Config.in. - (See also the new Config.in file.) - Probable next improvement: bad disk handler. - - Michael Lang - - Sept 14 1997: (v3.0c) - 1) Some debugging and speed optimization applied. - - Michael Lang - - Dec 15, 1997 - - chrisb@truespectra.com - - made the front panel display thingy optional, specified from the - command-line via ibmmcascsi=display. Along the lines of the /LED - option for the OS/2 driver. - - fixed small bug in the LED display that would hang some machines. - - reversed ordering of the drives (using the - IBMMCA_SCSI_ORDER_STANDARD define). This is necessary for two main - reasons: - - users who've already installed Linux won't be screwed. Keep - in mind that not everyone is a kernel hacker. - - be consistent with the BIOS ordering of the drives. In the - BIOS, id 6 is C:, id 0 might be D:. With this scheme, they'd be - backwards. This confuses the crap out of those heathens who've - got a impure Linux installation (which, <wince>, I'm one of). - This whole problem arises because IBM is actually non-standard with - the id to BIOS mappings. You'll find, in fdomain.c, a similar - comment about a few FD BIOS revisions. The Linux (and apparently - industry) standard is that C: maps to scsi id (0,0). Let's stick - with that standard. - - Since this is technically a branch of my own, I changed the - version number to 3.0e-cpb. - - Jan 17, 1998: (v3.0f) - 1) Addition of some statistical info for /proc in proc_info. - 2) Taking care of the SCSI-assignment problem, dealed by Chris at Dec 15 - 1997. In fact, IBM is right, concerning the assignment of SCSI-devices - to driveletters. It is conform to the ANSI-definition of the SCSI- - standard to assign drive C: to SCSI-id 6, because it is the highest - hardware priority after the hostadapter (that has still today by - default everywhere id 7). Also realtime-operating systems that I use, - like LynxOS and OS9, which are quite industrial systems use top-down - numbering of the harddisks, that is also starting at id 6. Now, one - sits a bit between two chairs. On one hand side, using the define - IBMMCA_SCSI_ORDER_STANDARD makes Linux assigning disks conform to - the IBM- and ANSI-SCSI-standard and keeps this driver downward - compatible to older releases, on the other hand side, people is quite - habituated in believing that C: is assigned to (0,0) and much other - SCSI-BIOS do so. Therefore, I moved the IBMMCA_SCSI_ORDER_STANDARD - define out of the driver and put it into Config.in as subitem of - 'IBM SCSI support'. A help, added to Documentation/Configure.help - explains the differences between saying 'y' or 'n' to the user, when - IBMMCA_SCSI_ORDER_STANDARD prompts, so the ordinary user is enabled to - choose the way of assignment, depending on his own situation and gusto. - 3) Adapted SCSI_IBMMCA_DEV_RESET to the local naming convention, so it is - now called IBMMCA_SCSI_DEV_RESET. - 4) Optimization of proc_info and its subroutines. - 5) Added more in-source-comments and extended the driver description by - some explanation about the SCSI-device-assignment problem. - - Michael Lang - - Jan 18, 1998: (v3.0g) - 1) Correcting names to be absolutely conform to the later 2.1.x releases. - This is necessary for - IBMMCA_SCSI_DEV_RESET -> CONFIG_IBMMCA_SCSI_DEV_RESET - IBMMCA_SCSI_ORDER_STANDARD -> CONFIG_IBMMCA_SCSI_ORDER_STANDARD - - Michael Lang - - Jan 18, 1999: (v3.1 MCA-team internal) - 1) The multiple hosts structure is accessed from every subroutine, so there - is no longer the address of the device structure passed from function - to function, but only the hostindex. A call by value, nothing more. This - should really be understood by the compiler and the subsystem should get - the right values and addresses. - 2) The SCSI-subsystem detection was not complete and quite hugely buggy up - to now, compared to the technical manual. The interpretation of the pos2 - register is not as assumed by people before, therefore, I dropped a note - in the ibmmca_detect function to show the registers' interpretation. - The pos-registers of integrated SCSI-subsystems do not contain any - information concerning the IO-port offset, really. Instead, they contain - some info about the adapter, the chip, the NVRAM .... The I/O-port is - fixed to 0x3540 - 0x3547. There can be more than one adapters in the - slots and they get an offset for the I/O area in order to get their own - I/O-address area. See chapter 2 for detailed description. At least, the - detection should now work right, even on models other than 95. The 95ers - came happily around the bug, as their pos2 register contains always 0 - in the critical area. Reserved bits are not allowed to be interpreted, - therefore, IBM is allowed to set those bits as they like and they may - really vary between different PS/2 models. So, now, no interpretation - of reserved bits - hopefully no trouble here anymore. - 3) The command error, which you may get on models 55, 56, 57, 70, 77 and - P70 may have been caused by the fact, that adapters of older design do - not like sending commands to non-existing SCSI-devices and will react - with a command error as a sign of protest. While this error is not - present on IBM SCSI Adapter w/cache, it appears on IBM Integrated SCSI - Adapters. Therefore, I implemented a workaround to forgive those - adapters their protests, but it is marked up in the statistics, so - after a successful boot, you can see in /proc/scsi/ibmmca/<host_number> - how often the command errors have been forgiven to the SCSI-subsystem. - If the number is bigger than 0, you have a SCSI subsystem of older - design, what should no longer matter. - 4) ibmmca_getinfo() has been adapted very carefully, so it shows in the - slotn file really, what is senseful to be presented. - 5) ibmmca_register() has been extended in its parameter list in order to - pass the right name of the SCSI-adapter to Linux. - - Michael Lang - - Feb 6, 1999: (v3.1) - 1) Finally, after some 3.1Beta-releases, the 3.1 release. Sorry, for - the delayed release, but it was not finished with the release of - Kernel 2.2.0. - - Michael Lang - - Feb 10, 1999 (v3.1) - 1) Added a new commandline parameter called 'bypass' in order to bypass - every integrated subsystem SCSI-command consequently in case of - troubles. - 2) Concatenated read_capacity requests to the harddisks. It gave a lot - of troubles with some controllers and after I wanted to apply some - extensions, it jumped out in the same situation, on my w/cache, as like - on D. Weinehalls' Model 56, having integrated SCSI. This gave me the - decisive hint to move the code-part out and declare it global. Now - it seems to work far better and more stable. Let us see what - the world thinks of it... - 3) By the way, only Sony DAT-drives seem to show density code 0x13. A - test with a HP drive gave right results, so the problem is vendor- - specific and not a problem of the OS or the driver. - - Michael Lang - - Feb 18, 1999 (v3.1d) - 1) The abort command and the reset function have been checked for - inconsistencies. From the logical point of thinking, they work - at their optimum, now, but as the subsystem does not answer with an - interrupt, abort never finishes, sigh... - 2) Everything, that is accessed by a busmaster request from the adapter - is now declared as global variable, even the return-buffer in the - local checking phase. This assures, that no accesses to undefined memory - areas are performed. - 3) In ibmmca.h, the line unchecked_isa_dma is added with 1 in order to - avoid memory-pointers for the areas higher than 16MByte in order to - be sure, it also works on 16-Bit Microchannel bus systems. - 4) A lot of small things have been found, but nothing that endangered the - driver operations. Just it should be more stable, now. - - Michael Lang - - Feb 20, 1999 (v3.1e) - 1) I took the warning from the Linux Kernel Hackers Guide serious and - checked the cmd->result return value to the done-function very carefully. - It is obvious, that the IBM SCSI only delivers the tsb.dev_status, if - some error appeared, else it is undefined. Now, this is fixed. Before - any SCB command gets queued, the tsb.dev_status is set to 0, so the - cmd->result won't screw up Linux higher level drivers. - 2) The reset-function has slightly improved. This is still planned for - abort. During the abort and the reset function, no interrupts are - allowed. This is however quite hard to cope with, so the INT-status - register is read. When the interrupt gets queued, one can find its - status immediately on that register and is enabled to continue in the - reset function. I had no chance to test this really, only in a bogus - situation, I got this function running, but the situation was too much - worse for Linux :-(, so tests will continue. - 3) Buffers got now consistent. No open address mapping, as before and - therefore no further troubles with the unassigned memory segmentation - faults that scrambled probes on 95XX series and even on 85XX series, - when the kernel is done in a not so perfectly fitting way. - 4) Spontaneous interrupts from the subsystem, appearing without any - command previously queued are answered with a DID_BAD_INTR result. - 5) Taken into account ZP Gus' proposals to reverse the SCSI-device - scan order. As it does not work on Kernel 2.1.x or 2.2.x, as proposed - by him, I implemented it in a slightly derived way, which offers in - addition more flexibility. - - Michael Lang - - Apr 23, 2000 (v3.2pre1) - 1) During a very long time, I collected a huge amount of bug reports from - various people, trying really quite different things on their SCSI- - PS/2s. Today, all these bug reports are taken into account and should be - mostly solved. The major topics were: - - Driver crashes during boottime by no obvious reason. - - Driver panics while the midlevel-SCSI-driver is trying to inquire - the SCSI-device properties, even though hardware is in perfect state. - - Displayed info for the various slot-cards is interpreted wrong. - The main reasons for the crashes were two: - 1) The commands to check for device information like INQUIRY, - TEST_UNIT_READY, REQUEST_SENSE and MODE_SENSE cause the devices - to deliver information of up to 255 bytes. Midlevel drivers offer - 1024 bytes of space for the answer, but the IBM-SCSI-adapters do - not accept this, as they stick quite near to ANSI-SCSI and report - a COMMAND_ERROR message which causes the driver to panic. The main - problem was located around the INQUIRY command. Now, for all the - mentioned commands, the buffersize sent to the adapter is at - maximum 255 which seems to be a quite reasonable solution. - TEST_UNIT_READY gets a buffersize of 0 to make sure that no - data is transferred in order to avoid any possible command failure. - 2) On unsuccessful TEST_UNIT_READY, the mid-level driver has to send - a REQUEST_SENSE in order to see where the problem is located. This - REQUEST_SENSE may have various length in its answer-buffer. IBM - SCSI-subsystems report a command failure if the returned buffersize - is different from the sent buffersize, but this can be suppressed by - a special bit, which is now done and problems seem to be solved. - 2) Code adaption to all kernel-releases. Now, the 3.2 code compiles on - 2.0.x, 2.1.x, 2.2.x and 2.3.x kernel releases without any code-changes. - 3) Commandline-parameters are recognized again, even under Kernel 2.3.x or - higher. - - Michael Lang - - April 27, 2000 (v3.2pre2) - 1) Bypassed commands get read by the adapter by one cycle instead of two. - This increases SCSI-performance. - 2) Synchronous datatransfer is provided for sure to be 5 MHz on older - SCSI and 10 MHz on internal F/W SCSI-adapter. - 3) New commandline parameters allow to force the adapter to slow down while - in synchronous transfer. Could be helpful for very old devices. - - Michael Lang - - June 2, 2000 (v3.2pre5) - 1) Added Jim Shorney's contribution to make the activity indicator - flashing in addition to the LED-alphanumeric display-panel on - models 95A. To be enabled to choose this feature freely, a new - commandline parameter is added, called 'activity'. - 2) Added the READ_CONTROL bit for test_unit_ready SCSI-command. - 3) Added some suppress_exception bits to read_device_capacity and - all device_inquiry occurrences in the driver code. - 4) Complaints about the various KERNEL_VERSION implementations are - taken into account. Every local_LinuxKernelVersion occurrence is - now replaced by KERNEL_VERSION, defined in linux/version.h. - Corresponding changes were applied to ibmmca.h, too. This was a - contribution to all kernel-parts by Philipp Hahn. - - Michael Lang - - July 17, 2000 (v3.2pre8) - A long period of collecting bug reports from all corners of the world - now lead to the following corrections to the code: - 1) SCSI-2 F/W support crashed with a COMMAND ERROR. The reason for this - was that it is possible to disable Fast-SCSI for the external bus. - The feature-control command, where this crash appeared regularly, tried - to set the maximum speed of 10MHz synchronous transfer speed and that - reports a COMMAND ERROR if external bus Fast-SCSI is disabled. Now, - the feature-command probes down from maximum speed until the adapter - stops to complain, which is at the same time the maximum possible - speed selected in the reference program. So, F/W external can run at - 5 MHz (slow-) or 10 MHz (fast-SCSI). During feature probing, the - COMMAND ERROR message is used to detect if the adapter does not complain. - 2) Up to now, only combined busmode is supported, if you use external - SCSI-devices, attached to the F/W-controller. If dual bus is selected, - only the internal SCSI-devices get accessed by Linux. For most - applications, this should do fine. - 3) Wide-SCSI-addressing (16-Bit) is now possible for the internal F/W - bus on the F/W adapter. If F/W adapter is detected, the driver - automatically uses the extended PUN/LUN <-> LDN mapping tables, which - are now new from 3.2pre8. This allows PUNs between 0 and 15 and should - provide more fun with the F/W adapter. - 4) Several machines use the SCSI: POS registers for internal/undocumented - storage of system relevant info. This confused the driver, mainly on - models 9595, as it expected no onboard SCSI only, if all POS in - the integrated SCSI-area are set to 0x00 or 0xff. Now, the mechanism - to check for integrated SCSI is much more restrictive and these problems - should be history. - - Michael Lang - - July 18, 2000 (v3.2pre9) - This develop rather quickly at the moment. Two major things were still - missing in 3.2pre8: - 1) The adapter PUN for F/W adapters has 4-bits, while all other adapters - have 3-bits. This is now taken into account for F/W. - 2) When you select CONFIG_IBMMCA_SCSI_ORDER_STANDARD, you should - normally get the inverse probing order of your devices on the SCSI-bus. - The ANSI device order gets scrambled in version 3.2pre8!! Now, a new - and tested algorithm inverts the device-order on the SCSI-bus and - automatically avoids accidental access to whatever SCSI PUN the adapter - is set and works with SCSI- and Wide-SCSI-addressing. - - Michael Lang - - July 23, 2000 (v3.2pre10 unpublished) - 1) LED panel display supports wide-addressing in ibmmca=display mode. - 2) Adapter-information and autoadaption to address-space is done. - 3) Auto-probing for maximum synchronous SCSI transfer rate is working. - 4) Optimization to some embedded function calls is applied. - 5) Added some comment for the user to wait for SCSI-devices being probed. - 6) Finished version 3.2 for Kernel 2.4.0. It least, I thought it is but... - - Michael Lang - - July 26, 2000 (v3.2pre11) - 1) I passed a horrible weekend getting mad with NMIs on kernel 2.2.14 and - a model 9595. Asking around in the community, nobody except of me has - seen such errors. Weird, but I am trying to recompile everything on - the model 9595. Maybe, as I use a specially modified gcc, that could - cause problems. But, it was not the reason. The true background was, - that the kernel was compiled for i386 and the 9595 has a 486DX-2. - Normally, no troubles should appear, but for this special machine, - only the right processor support is working fine! - 2) Previous problems with synchronous speed, slowing down from one adapter - to the next during probing are corrected. Now, local variables store - the synchronous bitmask for every single adapter found on the MCA bus. - 3) LED alphanumeric panel support for XX95 systems is now showing some - alive rotator during boottime. This makes sense, when no monitor is - connected to the system. You can get rid of all display activity, if - you do not use any parameter or just ibmmcascsi=activity, for the - harddrive activity LED, existent on all PS/2, except models 8595-XXX. - If no monitor is available, please use ibmmcascsi=display, which works - fine together with the linuxinfo utility for the LED-panel. - - Michael Lang - - July 29, 2000 (v3.2) - 1) Submission of this driver for kernel 2.4test-XX and 2.2.17. - - Michael Lang - - December 28, 2000 (v3.2d / v4.0) - 1) The interrupt handler had some wrong statement to wait for. This - was done due to experimental reasons during 3.2 development but it - has shown that this is not stable enough. Going back to wait for the - adapter to be not busy is best. - 2) Inquiry requests can be shorter than 255 bytes of return buffer. Due - to a bug in the ibmmca_queuecommand routine, this buffer was forced - to 255 at minimum. If the memory address, this return buffer is pointing - to does not offer more space, invalid memory accesses destabilized the - kernel. - 3) version 4.0 is only valid for kernel 2.4.0 or later. This is necessary - to remove old kernel version dependent waste from the driver. 3.2d is - only distributed with older kernels but keeps compatibility with older - kernel versions. 4.0 and higher versions cannot be used with older - kernels anymore!! You must have at least kernel 2.4.0!! - 4) The commandline argument 'bypass' and all its functionality got removed - in version 4.0. This was never really necessary, as all troubles were - based on non-command related reasons up to now, so bypassing commands - did not help to avoid any bugs. It is kept in 3.2X for debugging reasons. - 5) Dynamic reassignment of ldns was again verified and analyzed to be - completely inoperational. This is corrected and should work now. - 6) All commands that get sent to the SCSI adapter were verified and - completed in such a way, that they are now completely conform to the - demands in the technical description of IBM. Main candidates were the - DEVICE_INQUIRY, REQUEST_SENSE and DEVICE_CAPACITY commands. They must - be transferred by bypassing the internal command buffer of the adapter - or else the response can be a random result. GET_POS_INFO would be more - safe in usage, if one could use the SUPRESS_EXCEPTION_SHORT, but this - is not allowed by the technical references of IBM. (Sorry, folks, the - model 80 problem is still a task to be solved in a different way.) - 7) v3.2d is still hold back for some days for testing, while 4.0 is - released. - - Michael Lang - - January 3, 2001 (v4.0a) - 1) A lot of complains after the 2.4.0-prerelease kernel came in about - the impossibility to compile the driver as a module. This problem is - solved. In combination with that problem, some unprecise declaration - of the function option_setup() gave some warnings during compilation. - This is solved, too by a forward declaration in ibmmca.c. - 2) #ifdef argument concerning CONFIG_SCSI_IBMMCA is no longer needed and - was entirely removed. - 3) Some switch statements got optimized in code, as some minor variables - in internal SCSI-command handlers. - - Michael Lang - - 4 To do - ------- - - IBM SCSI-2 F/W external SCSI bus support in separate mode! - - It seems that the handling of bad disks is really bad - - non-existent, in fact. However, a low-level driver cannot help - much, if such things happen. - - 5 Users' Manual - --------------- - 5.1 Commandline Parameters - -------------------------- - There exist several features for the IBM SCSI-subsystem driver. - The commandline parameter format is: - - ibmmcascsi=<command1>,<command2>,<command3>,... - - where commandN can be one of the following: - - display Owners of a model 95 or other PS/2 systems with an - alphanumeric LED display may set this to have their - display showing the following output of the 8 digits: - - ------DA - - where '-' stays dark, 'D' shows the SCSI-device id - and 'A' shows the SCSI hostindex, being currently - accessed. During boottime, this will give the message - - SCSIini* - - on the LED-panel, where the * represents a rotator, - showing the activity during the probing phase of the - driver which can take up to two minutes per SCSI-adapter. - adisplay This works like display, but gives more optical overview - of the activities on the SCSI-bus. The display will have - the following output: - - 6543210A - - where the numbers 0 to 6 light up at the shown position, - when the SCSI-device is accessed. 'A' shows again the SCSI - hostindex. If display nor adisplay is set, the internal - PS/2 harddisk LED is used for media-activities. So, if - you really do not have a system with a LED-display, you - should not set display or adisplay. Keep in mind, that - display and adisplay can only be used alternatively. It - is not recommended to use this option, if you have some - wide-addressed devices e.g. at the SCSI-2 F/W adapter in - your system. In addition, the usage of the display for - other tasks in parallel, like the linuxinfo-utility makes - no sense with this option. - activity This enables the PS/2 harddisk LED activity indicator. - Most PS/2 have no alphanumeric LED display, but some - indicator. So you should use this parameter to activate it. - If you own model 9595 (Server95), you can have both, the - LED panel and the activity indicator in parallel. However, - some PS/2s, like the 8595 do not have any harddisk LED - activity indicator, which means, that you must use the - alphanumeric LED display if you want to monitor SCSI- - activity. - bypass This is obsolete from driver version 4.0, as the adapters - got that far understood, that the selection between - integrated and bypassed commands should now work completely - correct! For historical reasons, the old description is - kept here: - This commandline parameter forces the driver never to use - SCSI-subsystems' integrated SCSI-command set. Except of - the immediate assign, which is of vital importance for - every IBM SCSI-subsystem to set its ldns right. Instead, - the ordinary ANSI-SCSI-commands are used and passed by the - controller to the SCSI-devices, therefore 'bypass'. The - effort, done by the subsystem is quite bogus and at a - minimum and therefore it should work everywhere. This - could maybe solve troubles with old or integrated SCSI- - controllers and nasty harddisks. Keep in mind, that using - this flag will slow-down SCSI-accesses slightly, as the - software generated commands are always slower than the - hardware. Non-harddisk devices always get read/write- - commands in bypass mode. On the most recent releases of - the Linux IBM-SCSI-driver, the bypass command should be - no longer a necessary thing, if you are sure about your - SCSI-hardware! - normal This is the parameter, introduced on the 2.0.x development - rail by ZP Gu. This parameter defines the SCSI-device - scan order in the new industry standard. This means, that - the first SCSI-device is the one with the lowest pun. - E.g. harddisk at pun=0 is scanned before harddisk at - pun=6, which means, that harddisk at pun=0 gets sda - and the one at pun=6 gets sdb. - ansi The ANSI-standard for the right scan order, as done by - IBM, Microware and Microsoft, scans SCSI-devices starting - at the highest pun, which means, that e.g. harddisk at - pun=6 gets sda and a harddisk at pun=0 gets sdb. If you - like to have the same SCSI-device order, as in DOS, OS-9 - or OS/2, just use this parameter. - fast SCSI-I/O in synchronous mode is done at 5 MHz for IBM- - SCSI-devices. SCSI-2 Fast/Wide Adapter/A external bus - should then run at 10 MHz if Fast-SCSI is enabled, - and at 5 MHz if Fast-SCSI is disabled on the external - bus. This is the default setting when nothing is - specified here. - medium Synchronous rate is at 50% approximately, which means - 2.5 MHz for IBM SCSI-adapters and 5.0 MHz for F/W ext. - SCSI-bus (when Fast-SCSI speed enabled on external bus). - slow The slowest possible synchronous transfer rate is set. - This means 1.82 MHz for IBM SCSI-adapters and 2.0 MHz - for F/W external bus at Fast-SCSI speed on the external - bus. - - A further option is that you can force the SCSI-driver to accept a SCSI- - subsystem at a certain I/O-address with a predefined adapter PUN. This - is done by entering - - commandN = I/O-base - commandN+1 = adapter PUN - - e.g. ibmmcascsi=0x3540,7 will force the driver to detect a SCSI-subsystem - at I/O-address 0x3540 with adapter PUN 7. Please only use this method, if - the driver does really not recognize your SCSI-adapter! With driver version - 3.2, this recognition of various adapters was hugely improved and you - should try first to remove your commandline arguments of such type with a - newer driver. I bet, it will be recognized correctly. Even multiple and - different types of IBM SCSI-adapters should be recognized correctly, too. - Use the forced detection method only as last solution! - - Examples: - - ibmmcascsi=adisplay - - This will use the advanced display mode for the model 95 LED alphanumeric - display. - - ibmmcascsi=display,0x3558,7 - - This will activate the default display mode for the model 95 LED display - and will force the driver to accept a SCSI-subsystem at I/O-base 0x3558 - with adapter PUN 7. - - 5.2 Troubleshooting - ------------------- - The following FAQs should help you to solve some major problems with this - driver. - - Q: "Reset SCSI-devices at boottime" halts the system at boottime, why? - A: This is only tested with the IBM SCSI Adapter w/cache. It is not - yet proven to run on other adapters, however you may be lucky. - In version 3.1d this has been hugely improved and should work better, - now. Normally you really won't need to activate this flag in the - kernel configuration, as all post 1989 SCSI-devices should accept - the reset-signal, when the computer is switched on. The SCSI- - subsystem generates this reset while being initialized. This flag - is really reserved for users with very old, very strange or self-made - SCSI-devices. - Q: Why is the SCSI-order of my drives mirrored to the device-order - seen from OS/2 or DOS ? - A: It depends on the operating system, if it looks at the devices in - ANSI-SCSI-standard (starting from pun 6 and going down to pun 0) or - if it just starts at pun 0 and counts up. If you want to be conform - with OS/2 and DOS, you have to activate this flag in the kernel - configuration or you should set 'ansi' as parameter for the kernel. - The parameter 'normal' sets the new industry standard, starting - from pun 0, scanning up to pun 6. This allows you to change your - opinion still after having already compiled the kernel. - Q: Why can't I find IBM MCA SCSI support in the config menu? - A: You have to activate MCA bus support, first. - Q: Where can I find the latest info about this driver? - A: See the file MAINTAINERS for the current WWW-address, which offers - updates, info and Q/A lists. At this file's origin, the webaddress - was: http://www.staff.uni-mainz.de/mlang/linux.html - Q: My SCSI-adapter is not recognized by the driver, what can I do? - A: Just force it to be recognized by kernel parameters. See section 5.1. - If this really happens, do also send e-mail to the maintainer, as - forced detection should be never necessary. Forced detection is in - principal some flaw of the driver adapter detection and goes into - bug reports. - Q: The driver screws up, if it starts to probe SCSI-devices, is there - some way out of it? - A: Yes, that was some recognition problem of the correct SCSI-adapter - and its I/O base addresses. Upgrade your driver to the latest release - and it should be fine again. - Q: I get a message: panic IBM MCA SCSI: command error .... , what can - I do against this? - A: Previously, I followed the way by ignoring command errors by using - ibmmcascsi=forgiveall, but this command no longer exists and is - obsolete. If such a problem appears, it is caused by some segmentation - fault of the driver, which maps to some unallowed area. The latest - version of the driver should be ok, as most bugs have been solved. - Q: There are still kernel panics, even after having set - ibmmcascsi=forgiveall. Are there other possibilities to prevent - such panics? - A: No, get just the latest release of the driver and it should work - better and better with increasing version number. Forget about this - ibmmcascsi=forgiveall, as also ignorecmd are obsolete.! - Q: Linux panics or stops without any comment, but it is probable, that my - harddisk(s) have bad blocks. - A: Sorry, the bad-block handling is still a feeble point of this driver, - but is on the schedule for development in the near future. - Q: Linux panics while dynamically assigning SCSI-ids or ldns. - A: If you disconnect a SCSI-device from the machine, while Linux is up - and the driver uses dynamical reassignment of logical device numbers - (ldn), it really gets "angry" if it won't find devices, that were still - present at boottime and stops Linux. - Q: The system does not recover after an abort-command has been generated. - A: This is regrettably true, as it is not yet understood, why the - SCSI-adapter does really NOT generate any interrupt at the end of - the abort-command. As no interrupt is generated, the abort command - cannot get finished and the system hangs, sorry, but checks are - running to hunt down this problem. If there is a real pending command, - the interrupt MUST get generated after abort. In this case, it - should finish well. - Q: The system gets in bad shape after a SCSI-reset, is this known? - A: Yes, as there are a lot of prescriptions (see the Linux Hackers' - Guide) what has to be done for reset, we still share the bad shape of - the reset functions with all other low level SCSI-drivers. - Astonishingly, reset works in most cases quite ok, but the harddisks - won't run in synchronous mode anymore after a reset, until you reboot. - Q: Why does my XXX w/Cache adapter not use read-prefetch? - A: Ok, that is not completely possible. If a cache is present, the - adapter tries to use it internally. Explicitly, one can use the cache - with a read prefetch command, maybe in future, but this requires - some major overhead of SCSI-commands that risks the performance to - go down more than it gets improved. Tests with that are running. - Q: I have a IBM SCSI-2 Fast/Wide adapter, it boots in some way and hangs. - A: Yes, that is understood, as for sure, your SCSI-2 Fast/Wide adapter - was in such a case recognized as integrated SCSI-adapter or something - else, but not as the correct adapter. As the I/O-ports get assigned - wrongly by that reason, the system should crash in most cases. You - should upgrade to the latest release of the SCSI-driver. The - recommended version is 3.2 or later. Here, the F/W support is in - a stable and reliable condition. Wide-addressing is in addition - supported. - Q: I get an Oops message and something like "killing interrupt". - A: The reason for this is that the IBM SCSI-subsystem only sends a - termination status back, if some error appeared. In former releases - of the driver, it was not checked, if the termination status block - is NULL. From version 3.2, it is taken care of this. - Q: I have a F/W adapter and the driver sees my internal SCSI-devices, - but ignores the external ones. - A: Select combined busmode in the IBM config-program and check for that - no SCSI-id on the external devices appears on internal devices. - Reboot afterwards. Dual busmode is supported, but works only for the - internal bus, yet. External bus is still ignored. Take care for your - SCSI-ids. If combined bus-mode is activated, on some adapters, - the wide-addressing is not possible, so devices with ids between 8 - and 15 get ignored by the driver & adapter! - Q: I have a 9595 and I get a NMI during heavy SCSI I/O e.g. during fsck. - A COMMAND ERROR is reported and characters on the screen are missing. - Warm reboot is not possible. Things look like quite weird. - A: Check the processor type of your 9595. If you have an 80486 or 486DX-2 - processor complex on your mainboard and you compiled a kernel that - supports 80386 processors, it is possible, that the kernel cannot - keep track of the PS/2 interrupt handling and stops on an NMI. Just - compile a kernel for the correct processor type of your PS/2 and - everything should be fine. This is necessary even if one assumes, - that some 80486 system should be downward compatible to 80386 - software. - Q: Some commands hang and interrupts block the machine. After some - timeout, the syslog reports that it tries to call abort, but the - machine is frozen. - A: This can be a busy wait bug in the interrupt handler of driver - version 3.2. You should at least upgrade to 3.2c if you use - kernel < 2.4.0 and driver version 4.0 if you use kernel 2.4.0 or - later (including all test releases). - Q: I have a PS/2 model 80 and more than 16 MBytes of RAM. The driver - completely refuses to work, reports NMIs, COMMAND ERRORs or other - ambiguous stuff. When reducing the RAM size down below 16 MB, - everything is running smoothly. - A: No real answer, yet. In any case, one should force the kernel to - present SCBs only below the 16 MBytes barrier. Maybe this solves the - problem. Not yet tried, but guessing that it could work. To get this, - set unchecked_isa_dma argument of ibmmca.h from 0 to 1. - - 5.3 Bug reports - -------------- - If you really find bugs in the source code or the driver will successfully - refuse to work on your machine, you should send a bug report to me. The - best for this is to follow the instructions on the WWW-page for this - driver. Fill out the bug-report form, placed on the WWW-page and ship it, - so the bugs can be taken into account with maximum efforts. But, please - do not send bug reports about this driver to Linus Torvalds or Leonard - Zubkoff, as Linus is buried in E-Mail and Leonard is supervising all - SCSI-drivers and won't have the time left to look inside every single - driver to fix a bug and especially DO NOT send modified code to Linus - Torvalds or Alan J. Cox which has not been checked here!!! They are both - quite buried in E-mail (as me, sometimes, too) and one should first check - for problems on my local teststand. Recently, I got a lot of - bug reports for errors in the ibmmca.c code, which I could not imagine, but - a look inside some Linux-distribution showed me quite often some modified - code, which did no longer work on most other machines than the one of the - modifier. Ok, so now that there is maintenance service available for this - driver, please use this address first in order to keep the level of - confusion low. Thank you! - - When you get a SCSI-error message that panics your system, a list of - register-entries of the SCSI-subsystem is shown (from Version 3.1d). With - this list, it is very easy for the maintainer to localize the problem in - the driver or in the configuration of the user. Please write down all the - values from this report and send them to the maintainer. This would really - help a lot and makes life easier concerning misunderstandings. - - Use the bug-report form (see 5.4 for its address) to send all the bug- - stuff to the maintainer or write e-mail with the values from the table. - - 5.4 Support WWW-page - -------------------- - The address of the IBM SCSI-subsystem supporting WWW-page is: - - http://www.staff.uni-mainz.de/mlang/linux.html - - Here you can find info about the background of this driver, patches, - troubleshooting support, news and a bugreport form. Please check that - WWW-page regularly for latest hints. If ever this URL changes, please - refer to the MAINTAINERS file in order to get the latest address. - - For the bugreport, please fill out the formular on the corresponding - WWW-page. Read the dedicated instructions and write as much as you - know about your problem. If you do not like such formulars, please send - some e-mail directly, but at least with the same information as required by - the formular. - - If you have extensive bug reports, including Oops messages and - screen-shots, please feel free to send it directly to the address - of the maintainer, too. The current address of the maintainer is: - - Michael Lang <langa2@kph.uni-mainz.de> - - 6 References - ------------ - IBM Corp., "Update for the PS/2 Hardware Interface Technical Reference, - Common Interfaces", Armonk, September 1991, PN 04G3281, - (available in the U.S. for $21.75 at 1-800-IBM-PCTB or in Germany for - around 40,-DM at "Hallo IBM"). - - IBM Corp., "Personal System/2 Micro Channel SCSI - Adapter with Cache Technical Reference", Armonk, March 1990, PN 68X2365. - - IBM Corp., "Personal System/2 Micro Channel SCSI - Adapter Technical Reference", Armonk, March 1990, PN 68X2397. - - IBM Corp., "SCSI-2 Fast/Wide Adapter/A Technical Reference - Dual Bus", - Armonk, March 1994, PN 83G7545. - - Friedhelm Schmidt, "SCSI-Bus und IDE-Schnittstelle - Moderne Peripherie- - Schnittstellen: Hardware, Protokollbeschreibung und Anwendung", 2. Aufl. - Addison Wesley, 1996. - - Michael K. Johnson, "The Linux Kernel Hackers' Guide", Version 0.6, Chapel - Hill - North Carolina, 1995 - - Andreas Kaiser, "SCSI TAPE BACKUP for OS/2 2.0", Version 2.12, Stuttgart - 1993 - - Helmut Rompel, "IBM Computerwelt GUIDE", What is what bei IBM., Systeme * - Programme * Begriffe, IWT-Verlag GmbH - Muenchen, 1988 - - 7 Credits to - ------------ - 7.1 People - ---------- - Klaus Grimm - who already a long time ago gave me the old code from the - SCSI-driver in order to get it running for some old machine - in our institute. - Martin Kolinek - who wrote the first release of the IBM SCSI-subsystem driver. - Chris Beauregard - who for a long time maintained MCA-Linux and the SCSI-driver - in the beginning. Chris, wherever you are: Cheers to you! - Klaus Kudielka - with whom in the 2.1.x times, I had a quite fruitful - cooperation to get the driver running as a module and to get - it running with multiple SCSI-adapters. - David Weinehall - for his excellent maintenance of the MCA-stuff and the quite - detailed bug reports and ideas for this driver (and his - patience ;-)). - Alan J. Cox - for his bug reports and his bold activities in cross-checking - the driver-code with his teststand. - - 7.2 Sponsors & Supporters - ------------------------- - "Hallo IBM", - IBM-Deutschland GmbH - the service of IBM-Deutschland for customers. Their E-Mail - service is unbeatable. Whatever old stuff I asked for, I - always got some helpful answers. - Karl-Otto Reimers, - IBM Klub - Sparte IBM Geschichte, Sindelfingen - for sending me a copy of the w/Cache manual from the - IBM-Deutschland archives. - Harald Staiger - for his extensive hardware donations which allows me today - still to test the driver in various constellations. - Erich Fritscher - for his very kind sponsoring. - Louis Ohland, - Charles Lasitter - for support by shipping me an IBM SCSI-2 Fast/Wide manual. - In addition, the contribution of various hardware is quite - decessive and will make it possible to add FWSR (RAID) - adapter support to the driver in the near future! So, - complaints about no RAID support won't remain forever. - Yes, folks, that is no joke, RAID support is going to rise! - Erik Weber - for the great deal we made about a model 9595 and the nice - surrounding equipment and the cool trip to Mannheim - second-hand computer market. In addition, I would like - to thank him for his exhaustive SCSI-driver testing on his - 95er PS/2 park. - Anthony Hogbin - for his direct shipment of a SCSI F/W adapter, which allowed - me immediately on the first stage to try it on model 8557 - together with onboard SCSI adapter and some SCSI w/Cache. - Andreas Hotz - for his support by memory and an IBM SCSI-adapter. Collecting - all this together now allows me to try really things with - the driver at maximum load and variety on various models in - a very quick and efficient way. - Peter Jennewein - for his model 30, which serves me as part of my teststand - and his cool remark about how you make an ordinary diskette - drive working and how to connect it to an IBM-diskette port. - Johannes Gutenberg-Universitaet, Mainz & - Institut fuer Kernphysik, Mainz Microtron (MAMI) - for the offered space, the link, placed on the central - homepage and the space to store and offer the driver and - related material and the free working times, which allow - me to answer all your e-mail. - - 8 Trademarks - ------------ - IBM, PS/2, OS/2, Microchannel are registered trademarks of International - Business Machines Corporation - - MS-DOS is a registered trademark of Microsoft Corporation - - Microware, OS-9 are registered trademarks of Microware Systems - - 9 Disclaimer - ------------ - Beside the GNU General Public License and the dependent disclaimers and disclaimers - concerning the Linux-kernel in special, this SCSI-driver comes without any - warranty. Its functionality is tested as good as possible on certain - machines and combinations of computer hardware, which does not exclude, - that data loss or severe damage of hardware is possible while using this - part of software on some arbitrary computer hardware or in combination - with other software packages. It is highly recommended to make backup - copies of your data before using this software. Furthermore, personal - injuries by hardware defects, that could be caused by this SCSI-driver are - not excluded and it is highly recommended to handle this driver with a - maximum of carefulness. - - This driver supports hardware, produced by International Business Machines - Corporation (IBM). - ------- -Michael Lang -(langa2@kph.uni-mainz.de) diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt index 21e5798526ee..2bfd6f6d2d3d 100644 --- a/Documentation/scsi/scsi-parameters.txt +++ b/Documentation/scsi/scsi-parameters.txt @@ -37,9 +37,6 @@ parameters may be changed at runtime by the command eata= [HW,SCSI] - fd_mcs= [HW,SCSI] - See header of drivers/scsi/fd_mcs.c. - fdomain= [HW,SCSI] See header of drivers/scsi/fdomain.c. @@ -48,9 +45,6 @@ parameters may be changed at runtime by the command gvp11= [HW,SCSI] - ibmmcascsi= [HW,MCA,SCSI] IBM MicroChannel SCSI adapter - See Documentation/mca.txt. - in2000= [HW,SCSI] See header of drivers/scsi/in2000.c. diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt index a340b18cd4eb..2b06aba4fa0f 100644 --- a/Documentation/scsi/scsi_mid_low_api.txt +++ b/Documentation/scsi/scsi_mid_low_api.txt @@ -30,7 +30,7 @@ the motherboard (or both). Some aic7xxx based HBAs are dual controllers and thus represent two hosts. Like most modern HBAs, each aic7xxx host has its own PCI device address. [The one-to-one correspondence between a SCSI host and a PCI device is common but not required (e.g. with -ISA or MCA adapters).] +ISA adapters).] The SCSI mid level isolates an LLD from other layers such as the SCSI upper layer drivers and the block layer. diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 29684c8142b0..7a66d0e97dd3 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -807,19 +807,6 @@ config SCSI_FUTURE_DOMAIN To compile this driver as a module, choose M here: the module will be called fdomain. -config SCSI_FD_MCS - tristate "Future Domain MCS-600/700 SCSI support" - depends on MCA_LEGACY && SCSI - ---help--- - This is support for Future Domain MCS 600/700 MCA SCSI adapters. - Some PS/2 computers are equipped with IBM Fast SCSI Adapter/A which - is identical to the MCS 700 and hence also supported by this driver. - This driver also supports the Reply SB16/SCSI card (the SCSI part). - It supports multiple adapters in the same system. - - To compile this driver as a module, choose M here: the - module will be called fd_mcs. - config SCSI_GDTH tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support" depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API @@ -889,76 +876,6 @@ config SCSI_GENERIC_NCR53C400 not detect your card. See the file <file:Documentation/scsi/g_NCR5380.txt> for details. -config SCSI_IBMMCA - tristate "IBMMCA SCSI support" - depends on MCA && SCSI - ---help--- - This is support for the IBM SCSI adapter found in many of the PS/2 - series computers. These machines have an MCA bus, so you need to - answer Y to "MCA support" as well and read - <file:Documentation/mca.txt>. - - If the adapter isn't found during boot (a common problem for models - 56, 57, 76, and 77) you'll need to use the 'ibmmcascsi=<pun>' kernel - option, where <pun> is the id of the SCSI subsystem (usually 7, but - if that doesn't work check your reference diskette). Owners of - model 95 with a LED-matrix-display can in addition activate some - activity info like under OS/2, but more informative, by setting - 'ibmmcascsi=display' as an additional kernel parameter. Try "man - bootparam" or see the documentation of your boot loader about how to - pass options to the kernel. - - To compile this driver as a module, choose M here: the - module will be called ibmmca. - -config IBMMCA_SCSI_ORDER_STANDARD - bool "Standard SCSI-order" - depends on SCSI_IBMMCA - ---help--- - In the PC-world and in most modern SCSI-BIOS-setups, SCSI-hard disks - are assigned to the drive letters, starting with the lowest SCSI-id - (physical number -- pun) to be drive C:, as seen from DOS and - similar operating systems. When looking into papers describing the - ANSI-SCSI-standard, this assignment of drives appears to be wrong. - The SCSI-standard follows a hardware-hierarchy which says that id 7 - has the highest priority and id 0 the lowest. Therefore, the host - adapters are still today everywhere placed as SCSI-id 7 by default. - In the SCSI-standard, the drive letters express the priority of the - disk. C: should be the hard disk, or a partition on it, with the - highest priority. This must therefore be the disk with the highest - SCSI-id (e.g. 6) and not the one with the lowest! IBM-BIOS kept the - original definition of the SCSI-standard as also industrial- and - process-control-machines, like VME-CPUs running under realtime-OSes - (e.g. LynxOS, OS9) do. - - If you like to run Linux on your MCA-machine with the same - assignment of hard disks as seen from e.g. DOS or OS/2 on your - machine, which is in addition conformant to the SCSI-standard, you - must say Y here. This is also necessary for MCA-Linux users who want - to keep downward compatibility to older releases of the - IBM-MCA-SCSI-driver (older than driver-release 2.00 and older than - June 1997). - - If you like to have the lowest SCSI-id assigned as drive C:, as - modern SCSI-BIOSes do, which does not conform to the standard, but - is widespread and common in the PC-world of today, you must say N - here. If unsure, say Y. - -config IBMMCA_SCSI_DEV_RESET - bool "Reset SCSI-devices at boottime" - depends on SCSI_IBMMCA - ---help--- - By default, SCSI-devices are reset when the machine is powered on. - However, some devices exist, like special-control-devices, - SCSI-CNC-machines, SCSI-printer or scanners of older type, that do - not reset when switched on. If you say Y here, each device connected - to your SCSI-bus will be issued a reset-command after it has been - probed, while the kernel is booting. This may cause problems with - more modern devices, like hard disks, which do not appreciate these - reset commands, and can cause your system to hang. So say Y only if - you know that one of your older devices needs it; N is the safe - answer. - config SCSI_IPS tristate "IBM ServeRAID support" depends on PCI && SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 8deedeaf5608..1a3368b08615 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -75,7 +75,6 @@ obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/ obj-$(CONFIG_SCSI_PM8001) += pm8001/ obj-$(CONFIG_SCSI_ISCI) += isci/ obj-$(CONFIG_SCSI_IPS) += ips.o -obj-$(CONFIG_SCSI_FD_MCS) += fd_mcs.o obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o obj-$(CONFIG_SCSI_IN2000) += in2000.o obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o @@ -100,7 +99,6 @@ obj-$(CONFIG_SCSI_SYM53C8XX_2) += sym53c8xx_2/ obj-$(CONFIG_SCSI_ZALON) += zalon7xx.o obj-$(CONFIG_SCSI_EATA_PIO) += eata_pio.o obj-$(CONFIG_SCSI_7000FASST) += wd7000.o -obj-$(CONFIG_SCSI_IBMMCA) += ibmmca.o obj-$(CONFIG_SCSI_EATA) += eata.o obj-$(CONFIG_SCSI_DC395x) += dc395x.o obj-$(CONFIG_SCSI_DC390T) += tmscsim.o diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c index ede91f378000..f79c8f9e33a4 100644 --- a/drivers/scsi/aha1542.c +++ b/drivers/scsi/aha1542.c @@ -22,7 +22,7 @@ * Added module command-line options * 19-Jul-99 * Modified by Adam Fritzler - * Added proper detection of the AHA-1640 (MCA version of AHA-1540) + * Added proper detection of the AHA-1640 (MCA, now deleted) */ #include <linux/module.h> @@ -37,8 +37,6 @@ #include <linux/spinlock.h> #include <linux/isapnp.h> #include <linux/blkdev.h> -#include <linux/mca.h> -#include <linux/mca-legacy.h> #include <linux/slab.h> #include <asm/dma.h> @@ -71,7 +69,7 @@ #define MAXBOARDS 4 /* Increase this and the sizes of the arrays below, if you need more.. */ -/* Boards 3,4 slots are reserved for ISAPnP/MCA scans */ +/* Boards 3,4 slots are reserved for ISAPnP scans */ static unsigned int bases[MAXBOARDS] __initdata = {0x330, 0x334, 0, 0}; @@ -1009,66 +1007,6 @@ static int __init aha1542_detect(struct scsi_host_template * tpnt) #endif /* - * Find MicroChannel cards (AHA1640) - */ -#ifdef CONFIG_MCA_LEGACY - if(MCA_bus) { - int slot = 0; - int pos = 0; - - for (indx = 0; (slot != MCA_NOTFOUND) && (indx < ARRAY_SIZE(bases)); indx++) { - - if (bases[indx]) - continue; - - /* Detect only AHA-1640 cards -- MCA ID 0F1F */ - slot = mca_find_unused_adapter(0x0f1f, slot); - if (slot == MCA_NOTFOUND) - break; - - /* Found one */ - pos = mca_read_stored_pos(slot, 3); - - /* Decode address */ - if (pos & 0x80) { - if (pos & 0x02) { - if (pos & 0x01) - bases[indx] = 0x334; - else - bases[indx] = 0x234; - } else { - if (pos & 0x01) - bases[indx] = 0x134; - } - } else { - if (pos & 0x02) { - if (pos & 0x01) - bases[indx] = 0x330; - else - bases[indx] = 0x230; - } else { - if (pos & 0x01) - bases[indx] = 0x130; - } - } - - /* No need to decode IRQ and Arb level -- those are - * read off the card later. - */ - printk(KERN_INFO "Found an AHA-1640 in MCA slot %d, I/O 0x%04x\n", slot, bases[indx]); - - mca_set_adapter_name(slot, "Adapter AHA-1640"); - mca_set_adapter_procfn(slot, NULL, NULL); - mca_mark_as_used(slot); - - /* Go on */ - slot++; - } - - } -#endif - - /* * Hunt for ISA Plug'n'Pray Adaptecs (AHA1535) */ diff --git a/drivers/scsi/fd_mcs.c b/drivers/scsi/fd_mcs.c deleted file mode 100644 index 53bfcaa86f09..000000000000 --- a/drivers/scsi/fd_mcs.c +++ /dev/null @@ -1,1354 +0,0 @@ -/* fd_mcs.c -- Future Domain MCS 600/700 (or IBM OEM) driver - * - * FutureDomain MCS-600/700 v0.2 03/11/1998 by ZP Gu (zpg@castle.net) - * - * This driver is cloned from fdomain.* to specifically support - * the Future Domain MCS 600/700 MCA SCSI adapters. Some PS/2s - * also equipped with IBM Fast SCSI Adapter/A which is an OEM - * of MCS 700. - * - * This driver also supports Reply SB16/SCSI card (the SCSI part). - * - * What makes this driver different is that this driver is MCA only - * and it supports multiple adapters in the same system, IRQ - * sharing, some driver statistics, and maps highest SCSI id to sda. - * All cards are auto-detected. - * - * Assumptions: TMC-1800/18C50/18C30, BIOS >= 3.4 - * - * LILO command-line options: - * fd_mcs=<FIFO_COUNT>[,<FIFO_SIZE>] - * - * ******************************************************** - * Please see Copyrights/Comments in fdomain.* for credits. - * Following is from fdomain.c for acknowledgement: - * - * Created: Sun May 3 18:53:19 1992 by faith@cs.unc.edu - * Revised: Wed Oct 2 11:10:55 1996 by r.faith@ieee.org - * Author: Rickard E. Faith, faith@cs.unc.edu - * Copyright 1992, 1993, 1994, 1995, 1996 Rickard E. Faith - * - * $Id: fdomain.c,v 5.45 1996/10/02 15:13:06 root Exp $ - - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - - ************************************************************************** - - NOTES ON USER DEFINABLE OPTIONS: - - DEBUG: This turns on the printing of various debug information. - - ENABLE_PARITY: This turns on SCSI parity checking. With the current - driver, all attached devices must support SCSI parity. If none of your - devices support parity, then you can probably get the driver to work by - turning this option off. I have no way of testing this, however, and it - would appear that no one ever uses this option. - - FIFO_COUNT: The host adapter has an 8K cache (host adapters based on the - 18C30 chip have a 2k cache). When this many 512 byte blocks are filled by - the SCSI device, an interrupt will be raised. Therefore, this could be as - low as 0, or as high as 16. Note, however, that values which are too high - or too low seem to prevent any interrupts from occurring, and thereby lock - up the machine. I have found that 2 is a good number, but throughput may - be increased by changing this value to values which are close to 2. - Please let me know if you try any different values. - [*****Now a runtime option*****] - - RESELECTION: This is no longer an option, since I gave up trying to - implement it in version 4.x of this driver. It did not improve - performance at all and made the driver unstable (because I never found one - of the two race conditions which were introduced by the multiple - outstanding command code). The instability seems a very high price to pay - just so that you don't have to wait for the tape to rewind. If you want - this feature implemented, send me patches. I'll be happy to send a copy - of my (broken) driver to anyone who would like to see a copy. - - **************************************************************************/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/blkdev.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/ioport.h> -#include <linux/proc_fs.h> -#include <linux/delay.h> -#include <linux/mca.h> -#include <linux/spinlock.h> -#include <linux/slab.h> -#include <scsi/scsicam.h> -#include <linux/mca-legacy.h> - -#include <asm/io.h> - -#include "scsi.h" -#include <scsi/scsi_host.h> - -#define DRIVER_VERSION "v0.2 by ZP Gu<zpg@castle.net>" - -/* START OF USER DEFINABLE OPTIONS */ - -#define DEBUG 0 /* Enable debugging output */ -#define ENABLE_PARITY 1 /* Enable SCSI Parity */ - -/* END OF USER DEFINABLE OPTIONS */ - -#if DEBUG -#define EVERY_ACCESS 0 /* Write a line on every scsi access */ -#define ERRORS_ONLY 1 /* Only write a line if there is an error */ -#define DEBUG_MESSAGES 1 /* Debug MESSAGE IN phase */ -#define DEBUG_ABORT 1 /* Debug abort() routine */ -#define DEBUG_RESET 1 /* Debug reset() routine */ -#define DEBUG_RACE 1 /* Debug interrupt-driven race condition */ -#else -#define EVERY_ACCESS 0 /* LEAVE THESE ALONE--CHANGE THE ONES ABOVE */ -#define ERRORS_ONLY 0 -#define DEBUG_MESSAGES 0 -#define DEBUG_ABORT 0 -#define DEBUG_RESET 0 -#define DEBUG_RACE 0 -#endif - -/* Errors are reported on the line, so we don't need to report them again */ -#if EVERY_ACCESS -#undef ERRORS_ONLY -#define ERRORS_ONLY 0 -#endif - -#if ENABLE_PARITY -#define PARITY_MASK 0x08 -#else -#define PARITY_MASK 0x00 -#endif - -enum chip_type { - unknown = 0x00, - tmc1800 = 0x01, - tmc18c50 = 0x02, - tmc18c30 = 0x03, -}; - -enum { - in_arbitration = 0x02, - in_selection = 0x04, - in_other = 0x08, - disconnect = 0x10, - aborted = 0x20, - sent_ident = 0x40, -}; - -enum in_port_type { - Read_SCSI_Data = 0, - SCSI_Status = 1, - TMC_Status = 2, - FIFO_Status = 3, /* tmc18c50/tmc18c30 only */ - Interrupt_Cond = 4, /* tmc18c50/tmc18c30 only */ - LSB_ID_Code = 5, - MSB_ID_Code = 6, - Read_Loopback = 7, - SCSI_Data_NoACK = 8, - Interrupt_Status = 9, - Configuration1 = 10, - Configuration2 = 11, /* tmc18c50/tmc18c30 only */ - Read_FIFO = 12, - FIFO_Data_Count = 14 -}; - -enum out_port_type { - Write_SCSI_Data = 0, - SCSI_Cntl = 1, - Interrupt_Cntl = 2, - SCSI_Mode_Cntl = 3, - TMC_Cntl = 4, - Memory_Cntl = 5, /* tmc18c50/tmc18c30 only */ - Write_Loopback = 7, - IO_Control = 11, /* tmc18c30 only */ - Write_FIFO = 12 -}; - -struct fd_hostdata { - unsigned long _bios_base; - int _bios_major; - int _bios_minor; - volatile int _in_command; - Scsi_Cmnd *_current_SC; - enum chip_type _chip; - int _adapter_mask; - int _fifo_count; /* Number of 512 byte blocks before INTR */ - - char _adapter_name[64]; -#if DEBUG_RACE - volatile int _in_interrupt_flag; -#endif - - int _SCSI_Mode_Cntl_port; - int _FIFO_Data_Count_port; - int _Interrupt_Cntl_port; - int _Interrupt_Status_port; - int _Interrupt_Cond_port; - int _Read_FIFO_port; - int _Read_SCSI_Data_port; - int _SCSI_Cntl_port; - int _SCSI_Data_NoACK_port; - int _SCSI_Status_port; - int _TMC_Cntl_port; - int _TMC_Status_port; - int _Write_FIFO_port; - int _Write_SCSI_Data_port; - - int _FIFO_Size; /* = 0x2000; 8k FIFO for - pre-tmc18c30 chips */ - /* simple stats */ - int _Bytes_Read; - int _Bytes_Written; - int _INTR_Processed; -}; - -#define FD_MAX_HOSTS 3 /* enough? */ - -#define HOSTDATA(shpnt) ((struct fd_hostdata *) shpnt->hostdata) -#define bios_base (HOSTDATA(shpnt)->_bios_base) -#define bios_major (HOSTDATA(shpnt)->_bios_major) -#define bios_minor (HOSTDATA(shpnt)->_bios_minor) -#define in_command (HOSTDATA(shpnt)->_in_command) -#define current_SC (HOSTDATA(shpnt)->_current_SC) -#define chip (HOSTDATA(shpnt)->_chip) -#define adapter_mask (HOSTDATA(shpnt)->_adapter_mask) -#define FIFO_COUNT (HOSTDATA(shpnt)->_fifo_count) -#define adapter_name (HOSTDATA(shpnt)->_adapter_name) -#if DEBUG_RACE -#define in_interrupt_flag (HOSTDATA(shpnt)->_in_interrupt_flag) -#endif -#define SCSI_Mode_Cntl_port (HOSTDATA(shpnt)->_SCSI_Mode_Cntl_port) -#define FIFO_Data_Count_port (HOSTDATA(shpnt)->_FIFO_Data_Count_port) -#define Interrupt_Cntl_port (HOSTDATA(shpnt)->_Interrupt_Cntl_port) -#define Interrupt_Status_port (HOSTDATA(shpnt)->_Interrupt_Status_port) -#define Interrupt_Cond_port (HOSTDATA(shpnt)->_Interrupt_Cond_port) -#define Read_FIFO_port (HOSTDATA(shpnt)->_Read_FIFO_port) -#define Read_SCSI_Data_port (HOSTDATA(shpnt)->_Read_SCSI_Data_port) -#define SCSI_Cntl_port (HOSTDATA(shpnt)->_SCSI_Cntl_port) -#define SCSI_Data_NoACK_port (HOSTDATA(shpnt)->_SCSI_Data_NoACK_port) -#define SCSI_Status_port (HOSTDATA(shpnt)->_SCSI_Status_port) -#define TMC_Cntl_port (HOSTDATA(shpnt)->_TMC_Cntl_port) -#define TMC_Status_port (HOSTDATA(shpnt)->_TMC_Status_port) -#define Write_FIFO_port (HOSTDATA(shpnt)->_Write_FIFO_port) -#define Write_SCSI_Data_port (HOSTDATA(shpnt)->_Write_SCSI_Data_port) -#define FIFO_Size (HOSTDATA(shpnt)->_FIFO_Size) -#define Bytes_Read (HOSTDATA(shpnt)->_Bytes_Read) -#define Bytes_Written (HOSTDATA(shpnt)->_Bytes_Written) -#define INTR_Processed (HOSTDATA(shpnt)->_INTR_Processed) - -struct fd_mcs_adapters_struct { - char *name; - int id; - enum chip_type fd_chip; - int fifo_size; - int fifo_count; -}; - -#define REPLY_ID 0x5137 - -static struct fd_mcs_adapters_struct fd_mcs_adapters[] = { - {"Future Domain SCSI Adapter MCS-700(18C50)", - 0x60e9, - tmc18c50, - 0x2000, - 4}, - {"Future Domain SCSI Adapter MCS-600/700(TMC-1800)", - 0x6127, - tmc1800, - 0x2000, - 4}, - {"Reply Sound Blaster/SCSI Adapter", - REPLY_ID, - tmc18c30, - 0x800, - 2}, -}; - -#define FD_BRDS ARRAY_SIZE(fd_mcs_adapters) - -static irqreturn_t fd_mcs_intr(int irq, void *dev_id); - -static unsigned long addresses[] = { 0xc8000, 0xca000, 0xce000, 0xde000 }; -static unsigned short ports[] = { 0x140, 0x150, 0x160, 0x170 }; -static unsigned short interrupts[] = { 3, 5, 10, 11, 12, 14, 15, 0 }; - -/* host information */ -static int found = 0; -static struct Scsi_Host *hosts[FD_MAX_HOSTS + 1] = { NULL }; - -static int user_fifo_count = 0; -static int user_fifo_size = 0; - -#ifndef MODULE -static int __init fd_mcs_setup(char *str) -{ - static int done_setup = 0; - int ints[3]; - - get_options(str, 3, ints); - if (done_setup++ || ints[0] < 1 || ints[0] > 2 || ints[1] < 1 || ints[1] > 16) { - printk("fd_mcs: usage: fd_mcs=FIFO_COUNT, FIFO_SIZE\n"); - return 0; - } - - user_fifo_count = ints[0] >= 1 ? ints[1] : 0; - user_fifo_size = ints[0] >= 2 ? ints[2] : 0; - return 1; -} - -__setup("fd_mcs=", fd_mcs_setup); -#endif /* !MODULE */ - -static void print_banner(struct Scsi_Host *shpnt) -{ - printk("scsi%d <fd_mcs>: ", shpnt->host_no); - - if (bios_base) { - printk("BIOS at 0x%lX", bios_base); - } else { - printk("No BIOS"); - } - - printk(", HostID %d, %s Chip, IRQ %d, IO 0x%lX\n", shpnt->this_id, chip == tmc18c50 ? "TMC-18C50" : (chip == tmc18c30 ? "TMC-18C30" : (chip == tmc1800 ? "TMC-1800" : "Unknown")), shpnt->irq, shpnt->io_port); -} - - -static void do_pause(unsigned amount) -{ /* Pause for amount*10 milliseconds */ - do { - mdelay(10); - } while (--amount); -} - -static void fd_mcs_make_bus_idle(struct Scsi_Host *shpnt) -{ - outb(0, SCSI_Cntl_port); - outb(0, SCSI_Mode_Cntl_port); - if (chip == tmc18c50 || chip == tmc18c30) - outb(0x21 | PARITY_MASK, TMC_Cntl_port); /* Clear forced intr. */ - else - outb(0x01 | PARITY_MASK, TMC_Cntl_port); -} - -static int fd_mcs_detect(struct scsi_host_template * tpnt) -{ - int loop; - struct Scsi_Host *shpnt; - - /* get id, port, bios, irq */ - int slot; - u_char pos2, pos3, pos4; - int id, port, irq; - unsigned long bios; - - /* if not MCA machine, return */ - if (!MCA_bus) - return 0; - - /* changeable? */ - id = 7; - - for (loop = 0; loop < FD_BRDS; loop++) { - slot = 0; - while (MCA_NOTFOUND != (slot = mca_find_adapter(fd_mcs_adapters[loop].id, slot))) { - - /* if we get this far, an adapter has been detected and is - enabled */ - - printk(KERN_INFO "scsi <fd_mcs>: %s at slot %d\n", fd_mcs_adapters[loop].name, slot + 1); - - pos2 = mca_read_stored_pos(slot, 2); - pos3 = mca_read_stored_pos(slot, 3); - pos4 = mca_read_stored_pos(slot, 4); - - /* ready for next probe */ - slot++; - - if (fd_mcs_adapters[loop].id == REPLY_ID) { /* reply card */ - static int reply_irq[] = { 10, 11, 14, 15 }; - - bios = 0; /* no bios */ - - if (pos2 & 0x2) - port = ports[pos4 & 0x3]; - else - continue; - - /* can't really disable it, same as irq=10 */ - irq = reply_irq[((pos4 >> 2) & 0x1) + 2 * ((pos4 >> 4) & 0x1)]; - } else { - bios = addresses[pos2 >> 6]; - port = ports[(pos2 >> 4) & 0x03]; - irq = interrupts[(pos2 >> 1) & 0x07]; - } - - if (irq) { - /* claim the slot */ - mca_set_adapter_name(slot - 1, fd_mcs_adapters[loop].name); - - /* check irq/region */ - if (request_irq(irq, fd_mcs_intr, IRQF_SHARED, "fd_mcs", hosts)) { - printk(KERN_ERR "fd_mcs: interrupt is not available, skipping...\n"); - continue; - } - - /* request I/O region */ - if (request_region(port, 0x10, "fd_mcs")) { - printk(KERN_ERR "fd_mcs: I/O region is already in use, skipping...\n"); - continue; - } - /* register */ - if (!(shpnt = scsi_register(tpnt, sizeof(struct fd_hostdata)))) { - printk(KERN_ERR "fd_mcs: scsi_register() failed\n"); - release_region(port, 0x10); - free_irq(irq, hosts); - continue; - } - - - /* save name */ - strcpy(adapter_name, fd_mcs_adapters[loop].name); - - /* chip/fifo */ - chip = fd_mcs_adapters[loop].fd_chip; - /* use boot time value if available */ - FIFO_COUNT = user_fifo_count ? user_fifo_count : fd_mcs_adapters[loop].fifo_count; - FIFO_Size = user_fifo_size ? user_fifo_size : fd_mcs_adapters[loop].fifo_size; - -/* FIXME: Do we need to keep this bit of code inside NOT_USED around at all? */ -#ifdef NOT_USED - /* *************************************************** */ - /* Try to toggle 32-bit mode. This only - works on an 18c30 chip. (User reports - say this works, so we should switch to - it in the near future.) */ - outb(0x80, port + IO_Control); - if ((inb(port + Configuration2) & 0x80) == 0x80) { - outb(0x00, port + IO_Control); - if ((inb(port + Configuration2) & 0x80) == 0x00) { - chip = tmc18c30; - FIFO_Size = 0x800; /* 2k FIFO */ - - printk("FIRST: chip=%s, fifo_size=0x%x\n", (chip == tmc18c30) ? "tmc18c30" : "tmc18c50", FIFO_Size); - } - } - - /* That should have worked, but appears to - have problems. Let's assume it is an - 18c30 if the RAM is disabled. */ - - if (inb(port + Configuration2) & 0x02) { - chip = tmc18c30; - FIFO_Size = 0x800; /* 2k FIFO */ - - printk("SECOND: chip=%s, fifo_size=0x%x\n", (chip == tmc18c30) ? "tmc18c30" : "tmc18c50", FIFO_Size); - } - /* *************************************************** */ -#endif - - /* IBM/ANSI scsi scan ordering */ - /* Stick this back in when the scsi.c changes are there */ - shpnt->reverse_ordering = 1; - - - /* saving info */ - hosts[found++] = shpnt; - - shpnt->this_id = id; - shpnt->irq = irq; - shpnt->io_port = port; - shpnt->n_io_port = 0x10; - - /* save */ - bios_base = bios; - adapter_mask = (1 << id); - - /* save more */ - SCSI_Mode_Cntl_port = port + SCSI_Mode_Cntl; - FIFO_Data_Count_port = port + FIFO_Data_Count; - Interrupt_Cntl_port = port + Interrupt_Cntl; - Interrupt_Status_port = port + Interrupt_Status; - Interrupt_Cond_port = port + Interrupt_Cond; - Read_FIFO_port = port + Read_FIFO; - Read_SCSI_Data_port = port + Read_SCSI_Data; - SCSI_Cntl_port = port + SCSI_Cntl; - SCSI_Data_NoACK_port = port + SCSI_Data_NoACK; - SCSI_Status_port = port + SCSI_Status; - TMC_Cntl_port = port + TMC_Cntl; - TMC_Status_port = port + TMC_Status; - Write_FIFO_port = port + Write_FIFO; - Write_SCSI_Data_port = port + Write_SCSI_Data; - - Bytes_Read = 0; - Bytes_Written = 0; - INTR_Processed = 0; - - /* say something */ - print_banner(shpnt); - - /* reset */ - outb(1, SCSI_Cntl_port); - do_pause(2); - outb(0, SCSI_Cntl_port); - do_pause(115); - outb(0, SCSI_Mode_Cntl_port); - outb(PARITY_MASK, TMC_Cntl_port); - /* done reset */ - } - } - - if (found == FD_MAX_HOSTS) { - printk("fd_mcs: detecting reached max=%d host adapters.\n", FD_MAX_HOSTS); - break; - } - } - - return found; -} - -static const char *fd_mcs_info(struct Scsi_Host *shpnt) -{ - return adapter_name; -} - -static int TOTAL_INTR = 0; - -/* - * inout : decides on the direction of the dataflow and the meaning of the - * variables - * buffer: If inout==FALSE data is being written to it else read from it - * *start: If inout==FALSE start of the valid data in the buffer - * offset: If inout==FALSE offset from the beginning of the imaginary file - * from which we start writing into the buffer - * length: If inout==FALSE max number of bytes to be written into the buffer - * else number of bytes in the buffer - */ -static int fd_mcs_proc_info(struct Scsi_Host *shpnt, char *buffer, char **start, off_t offset, int length, int inout) -{ - int len = 0; - - if (inout) - return (-ENOSYS); - - *start = buffer + offset; - - len += sprintf(buffer + len, "Future Domain MCS-600/700 Driver %s\n", DRIVER_VERSION); - len += sprintf(buffer + len, "HOST #%d: %s\n", shpnt->host_no, adapter_name); - len += sprintf(buffer + len, "FIFO Size=0x%x, FIFO Count=%d\n", FIFO_Size, FIFO_COUNT); - len += sprintf(buffer + len, "DriverCalls=%d, Interrupts=%d, BytesRead=%d, BytesWrite=%d\n\n", TOTAL_INTR, INTR_Processed, Bytes_Read, Bytes_Written); - - if ((len -= offset) <= 0) - return 0; - if (len > length) - len = length; - return len; -} - -static int fd_mcs_select(struct Scsi_Host *shpnt, int target) -{ - int status; - unsigned long timeout; - - outb(0x82, SCSI_Cntl_port); /* Bus Enable + Select */ - outb(adapter_mask | (1 << target), SCSI_Data_NoACK_port); - - /* Stop arbitration and enable parity */ - outb(PARITY_MASK, TMC_Cntl_port); - - timeout = 350; /* 350mS -- because of timeouts - (was 250mS) */ - - do { - status = inb(SCSI_Status_port); /* Read adapter status */ - if (status & 1) { /* Busy asserted */ - /* Enable SCSI Bus (on error, should make bus idle with 0) */ - outb(0x80, SCSI_Cntl_port); - return 0; - } - udelay(1000); /* wait one msec */ - } while (--timeout); - - /* Make bus idle */ - fd_mcs_make_bus_idle(shpnt); -#if EVERY_ACCESS - if (!target) - printk("Selection failed\n"); -#endif -#if ERRORS_ONLY - if (!target) { - static int flag = 0; - - if (!flag) /* Skip first failure for all chips. */ - ++flag; - else - printk("fd_mcs: Selection failed\n"); - } -#endif - return 1; -} - -static void my_done(struct Scsi_Host *shpnt, int error) -{ - if (in_command) { - in_command = 0; - outb(0x00, Interrupt_Cntl_port); - fd_mcs_make_bus_idle(shpnt); - current_SC->result = error; - current_SC->scsi_done(current_SC); - } else { - panic("fd_mcs: my_done() called outside of command\n"); - } -#if DEBUG_RACE - in_interrupt_flag = 0; -#endif -} - -/* only my_done needs to be protected */ -static irqreturn_t fd_mcs_intr(int irq, void *dev_id) -{ - unsigned long flags; - int status; - int done = 0; - unsigned data_count, tmp_count; - - int i = 0; - struct Scsi_Host *shpnt; - - TOTAL_INTR++; - - /* search for one adapter-response on shared interrupt */ - while ((shpnt = hosts[i++])) { - if ((inb(TMC_Status_port)) & 1) - break; - } - - /* return if some other device on this IRQ caused the interrupt */ - if (!shpnt) { - return IRQ_NONE; - } - - INTR_Processed++; - - outb(0x00, Interrupt_Cntl_port); - - /* Abort calls my_done, so we do nothing here. */ - if (current_SC->SCp.phase & aborted) { -#if DEBUG_ABORT - printk("Interrupt after abort, ignoring\n"); -#endif - /* return IRQ_HANDLED; */ - } -#if DEBUG_RACE - ++in_interrupt_flag; -#endif - - if (current_SC->SCp.phase & in_arbitration) { - status = inb(TMC_Status_port); /* Read adapter status */ - if (!(status & 0x02)) { -#if EVERY_ACCESS - printk(" AFAIL "); -#endif - spin_lock_irqsave(shpnt->host_lock, flags); - my_done(shpnt, DID_BUS_BUSY << 16); - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; - } - current_SC->SCp.phase = in_selection; - - outb(0x40 | FIFO_COUNT, Interrupt_Cntl_port); - - outb(0x82, SCSI_Cntl_port); /* Bus Enable + Select */ - outb(adapter_mask | (1 << scmd_id(current_SC)), SCSI_Data_NoACK_port); - - /* Stop arbitration and enable parity */ - outb(0x10 | PARITY_MASK, TMC_Cntl_port); -#if DEBUG_RACE - in_interrupt_flag = 0; -#endif - return IRQ_HANDLED; - } else if (current_SC->SCp.phase & in_selection) { - status = inb(SCSI_Status_port); - if (!(status & 0x01)) { - /* Try again, for slow devices */ - if (fd_mcs_select(shpnt, scmd_id(current_SC))) { -#if EVERY_ACCESS - printk(" SFAIL "); -#endif - spin_lock_irqsave(shpnt->host_lock, flags); - my_done(shpnt, DID_NO_CONNECT << 16); - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; - } else { -#if EVERY_ACCESS - printk(" AltSel "); -#endif - /* Stop arbitration and enable parity */ - outb(0x10 | PARITY_MASK, TMC_Cntl_port); - } - } - current_SC->SCp.phase = in_other; - outb(0x90 | FIFO_COUNT, Interrupt_Cntl_port); - outb(0x80, SCSI_Cntl_port); -#if DEBUG_RACE - in_interrupt_flag = 0; -#endif - return IRQ_HANDLED; - } - - /* current_SC->SCp.phase == in_other: this is the body of the routine */ - - status = inb(SCSI_Status_port); - - if (status & 0x10) { /* REQ */ - - switch (status & 0x0e) { - - case 0x08: /* COMMAND OUT */ - outb(current_SC->cmnd[current_SC->SCp.sent_command++], Write_SCSI_Data_port); -#if EVERY_ACCESS - printk("CMD = %x,", current_SC->cmnd[current_SC->SCp.sent_command - 1]); -#endif - break; - case 0x00: /* DATA OUT -- tmc18c50/tmc18c30 only */ - if (chip != tmc1800 && !current_SC->SCp.have_data_in) { - current_SC->SCp.have_data_in = -1; - outb(0xd0 | PARITY_MASK, TMC_Cntl_port); - } - break; - case 0x04: /* DATA IN -- tmc18c50/tmc18c30 only */ - if (chip != tmc1800 && !current_SC->SCp.have_data_in) { - current_SC->SCp.have_data_in = 1; - outb(0x90 | PARITY_MASK, TMC_Cntl_port); - } - break; - case 0x0c: /* STATUS IN */ - current_SC->SCp.Status = inb(Read_SCSI_Data_port); -#if EVERY_ACCESS - printk("Status = %x, ", current_SC->SCp.Status); -#endif -#if ERRORS_ONLY - if (current_SC->SCp.Status && current_SC->SCp.Status != 2 && current_SC->SCp.Status != 8) { - printk("ERROR fd_mcs: target = %d, command = %x, status = %x\n", current_SC->device->id, current_SC->cmnd[0], current_SC->SCp.Status); - } -#endif - break; - case 0x0a: /* MESSAGE OUT */ - outb(MESSAGE_REJECT, Write_SCSI_Data_port); /* Reject */ - break; - case 0x0e: /* MESSAGE IN */ - current_SC->SCp.Message = inb(Read_SCSI_Data_port); -#if EVERY_ACCESS - printk("Message = %x, ", current_SC->SCp.Message); -#endif - if (!current_SC->SCp.Message) - ++done; -#if DEBUG_MESSAGES || EVERY_ACCESS - if (current_SC->SCp.Message) { - printk("fd_mcs: message = %x\n", current_SC->SCp.Message); - } -#endif - break; - } - } - - if (chip == tmc1800 && !current_SC->SCp.have_data_in && (current_SC->SCp.sent_command >= current_SC->cmd_len)) { - /* We have to get the FIFO direction - correct, so I've made a table based - on the SCSI Standard of which commands - appear to require a DATA OUT phase. - */ - /* - p. 94: Command for all device types - CHANGE DEFINITION 40 DATA OUT - COMPARE 39 DATA OUT - COPY 18 DATA OUT - COPY AND VERIFY 3a DATA OUT - INQUIRY 12 - LOG SELECT 4c DATA OUT - LOG SENSE 4d - MODE SELECT (6) 15 DATA OUT - MODE SELECT (10) 55 DATA OUT - MODE SENSE (6) 1a - MODE SENSE (10) 5a - READ BUFFER 3c - RECEIVE DIAGNOSTIC RESULTS 1c - REQUEST SENSE 03 - SEND DIAGNOSTIC 1d DATA OUT - TEST UNIT READY 00 - WRITE BUFFER 3b DATA OUT - - p.178: Commands for direct-access devices (not listed on p. 94) - FORMAT UNIT 04 DATA OUT - LOCK-UNLOCK CACHE 36 - PRE-FETCH 34 - PREVENT-ALLOW MEDIUM REMOVAL 1e - READ (6)/RECEIVE 08 - READ (10) 3c - READ CAPACITY 25 - READ DEFECT DATA (10) 37 - READ LONG 3e - REASSIGN BLOCKS 07 DATA OUT - RELEASE 17 - RESERVE 16 DATA OUT - REZERO UNIT/REWIND 01 - SEARCH DATA EQUAL (10) 31 DATA OUT - SEARCH DATA HIGH (10) 30 DATA OUT - SEARCH DATA LOW (10) 32 DATA OUT - SEEK (6) 0b - SEEK (10) 2b - SET LIMITS (10) 33 - START STOP UNIT 1b - SYNCHRONIZE CACHE 35 - VERIFY (10) 2f - WRITE (6)/PRINT/SEND 0a DATA OUT - WRITE (10)/SEND 2a DATA OUT - WRITE AND VERIFY (10) 2e DATA OUT - WRITE LONG 3f DATA OUT - WRITE SAME 41 DATA OUT ? - - p. 261: Commands for sequential-access devices (not previously listed) - ERASE 19 - LOAD UNLOAD 1b - LOCATE 2b - READ BLOCK LIMITS 05 - READ POSITION 34 - READ REVERSE 0f - RECOVER BUFFERED DATA 14 - SPACE 11 - WRITE FILEMARKS 10 ? - - p. 298: Commands for printer devices (not previously listed) - ****** NOT SUPPORTED BY THIS DRIVER, since 0b is SEEK (6) ***** - SLEW AND PRINT 0b DATA OUT -- same as seek - STOP PRINT 1b - SYNCHRONIZE BUFFER 10 - - p. 315: Commands for processor devices (not previously listed) - - p. 321: Commands for write-once devices (not previously listed) - MEDIUM SCAN 38 - READ (12) a8 - SEARCH DATA EQUAL (12) b1 DATA OUT - SEARCH DATA HIGH (12) b0 DATA OUT - SEARCH DATA LOW (12) b2 DATA OUT - SET LIMITS (12) b3 - VERIFY (12) af - WRITE (12) aa DATA OUT - WRITE AND VERIFY (12) ae DATA OUT - - p. 332: Commands for CD-ROM devices (not previously listed) - PAUSE/RESUME 4b - PLAY AUDIO (10) 45 - PLAY AUDIO (12) a5 - PLAY AUDIO MSF 47 - PLAY TRACK RELATIVE (10) 49 - PLAY TRACK RELATIVE (12) a9 - READ HEADER 44 - READ SUB-CHANNEL 42 - READ TOC 43 - - p. 370: Commands for scanner devices (not previously listed) - GET DATA BUFFER STATUS 34 - GET WINDOW 25 - OBJECT POSITION 31 - SCAN 1b - SET WINDOW 24 DATA OUT - - p. 391: Commands for optical memory devices (not listed) - ERASE (10) 2c - ERASE (12) ac - MEDIUM SCAN 38 DATA OUT - READ DEFECT DATA (12) b7 - READ GENERATION 29 - READ UPDATED BLOCK 2d - UPDATE BLOCK 3d DATA OUT - - p. 419: Commands for medium changer devices (not listed) - EXCHANGE MEDIUM 46 - INITIALIZE ELEMENT STATUS 07 - MOVE MEDIUM a5 - POSITION TO ELEMENT 2b - READ ELEMENT STATUS b8 - REQUEST VOL. ELEMENT ADDRESS b5 - SEND VOLUME TAG b6 DATA OUT - - p. 454: Commands for communications devices (not listed previously) - GET MESSAGE (6) 08 - GET MESSAGE (10) 28 - GET MESSAGE (12) a8 - */ - - switch (current_SC->cmnd[0]) { - case CHANGE_DEFINITION: - case COMPARE: - case COPY: - case COPY_VERIFY: - case LOG_SELECT: - case MODE_SELECT: - case MODE_SELECT_10: - case SEND_DIAGNOSTIC: - case WRITE_BUFFER: - - case FORMAT_UNIT: - case REASSIGN_BLOCKS: - case RESERVE: - case SEARCH_EQUAL: - case SEARCH_HIGH: - case SEARCH_LOW: - case WRITE_6: - case WRITE_10: - case WRITE_VERIFY: - case 0x3f: - case 0x41: - - case 0xb1: - case 0xb0: - case 0xb2: - case 0xaa: - case 0xae: - - case 0x24: - - case 0x38: - case 0x3d: - - case 0xb6: - - case 0xea: /* alternate number for WRITE LONG */ - - current_SC->SCp.have_data_in = -1; - outb(0xd0 | PARITY_MASK, TMC_Cntl_port); - break; - - case 0x00: - default: - - current_SC->SCp.have_data_in = 1; - outb(0x90 | PARITY_MASK, TMC_Cntl_port); - break; - } - } - - if (current_SC->SCp.have_data_in == -1) { /* DATA OUT */ - while ((data_count = FIFO_Size - inw(FIFO_Data_Count_port)) > 512) { -#if EVERY_ACCESS - printk("DC=%d, ", data_count); -#endif - if (data_count > current_SC->SCp.this_residual) - data_count = current_SC->SCp.this_residual; - if (data_count > 0) { -#if EVERY_ACCESS - printk("%d OUT, ", data_count); -#endif - if (data_count == 1) { - Bytes_Written++; - - outb(*current_SC->SCp.ptr++, Write_FIFO_port); - --current_SC->SCp.this_residual; - } else { - data_count >>= 1; - tmp_count = data_count << 1; - outsw(Write_FIFO_port, current_SC->SCp.ptr, data_count); - current_SC->SCp.ptr += tmp_count; - Bytes_Written += tmp_count; - current_SC->SCp.this_residual -= tmp_count; - } - } - if (!current_SC->SCp.this_residual) { - if (current_SC->SCp.buffers_residual) { - --current_SC->SCp.buffers_residual; - ++current_SC->SCp.buffer; - current_SC->SCp.ptr = sg_virt(current_SC->SCp.buffer); - current_SC->SCp.this_residual = current_SC->SCp.buffer->length; - } else - break; - } - } - } else if (current_SC->SCp.have_data_in == 1) { /* DATA IN */ - while ((data_count = inw(FIFO_Data_Count_port)) > 0) { -#if EVERY_ACCESS - printk("DC=%d, ", data_count); -#endif - if (data_count > current_SC->SCp.this_residual) - data_count = current_SC->SCp.this_residual; - if (data_count) { -#if EVERY_ACCESS - printk("%d IN, ", data_count); -#endif - if (data_count == 1) { - Bytes_Read++; - *current_SC->SCp.ptr++ = inb(Read_FIFO_port); - --current_SC->SCp.this_residual; - } else { - data_count >>= 1; /* Number of words */ - tmp_count = data_count << 1; - insw(Read_FIFO_port, current_SC->SCp.ptr, data_count); - current_SC->SCp.ptr += tmp_count; - Bytes_Read += tmp_count; - current_SC->SCp.this_residual -= tmp_count; - } - } - if (!current_SC->SCp.this_residual && current_SC->SCp.buffers_residual) { - --current_SC->SCp.buffers_residual; - ++current_SC->SCp.buffer; - current_SC->SCp.ptr = sg_virt(current_SC->SCp.buffer); - current_SC->SCp.this_residual = current_SC->SCp.buffer->length; - } - } - } - - if (done) { -#if EVERY_ACCESS - printk(" ** IN DONE %d ** ", current_SC->SCp.have_data_in); -#endif - -#if EVERY_ACCESS - printk("BEFORE MY_DONE. . ."); -#endif - spin_lock_irqsave(shpnt->host_lock, flags); - my_done(shpnt, (current_SC->SCp.Status & 0xff) - | ((current_SC->SCp.Message & 0xff) << 8) | (DID_OK << 16)); - spin_unlock_irqrestore(shpnt->host_lock, flags); -#if EVERY_ACCESS - printk("RETURNING.\n"); -#endif - - } else { - if (current_SC->SCp.phase & disconnect) { - outb(0xd0 | FIFO_COUNT, Interrupt_Cntl_port); - outb(0x00, SCSI_Cntl_port); - } else { - outb(0x90 | FIFO_COUNT, Interrupt_Cntl_port); - } - } -#if DEBUG_RACE - in_interrupt_flag = 0; -#endif - return IRQ_HANDLED; -} - -static int fd_mcs_release(struct Scsi_Host *shpnt) -{ - int i, this_host, irq_usage; - - release_region(shpnt->io_port, shpnt->n_io_port); - - this_host = -1; - irq_usage = 0; - for (i = 0; i < found; i++) { - if (shpnt == hosts[i]) - this_host = i; - if (shpnt->irq == hosts[i]->irq) - irq_usage++; - } - - /* only for the last one */ - if (1 == irq_usage) - free_irq(shpnt->irq, hosts); - - found--; - - for (i = this_host; i < found; i++) - hosts[i] = hosts[i + 1]; - - hosts[found] = NULL; - - return 0; -} - -static int fd_mcs_queue_lck(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *)) -{ - struct Scsi_Host *shpnt = SCpnt->device->host; - - if (in_command) { - panic("fd_mcs: fd_mcs_queue() NOT REENTRANT!\n"); - } -#if EVERY_ACCESS - printk("queue: target = %d cmnd = 0x%02x pieces = %d size = %u\n", - SCpnt->target, *(unsigned char *) SCpnt->cmnd, - scsi_sg_count(SCpnt), scsi_bufflen(SCpnt)); -#endif - - fd_mcs_make_bus_idle(shpnt); - - SCpnt->scsi_done = done; /* Save this for the done function */ - current_SC = SCpnt; - - /* Initialize static data */ - - if (scsi_bufflen(current_SC)) { - current_SC->SCp.buffer = scsi_sglist(current_SC); - current_SC->SCp.ptr = sg_virt(current_SC->SCp.buffer); - current_SC->SCp.this_residual = current_SC->SCp.buffer->length; - current_SC->SCp.buffers_residual = scsi_sg_count(current_SC) - 1; - } else { - current_SC->SCp.ptr = NULL; - current_SC->SCp.this_residual = 0; - current_SC->SCp.buffer = NULL; - current_SC->SCp.buffers_residual = 0; - } - - - current_SC->SCp.Status = 0; - current_SC->SCp.Message = 0; - current_SC->SCp.have_data_in = 0; - current_SC->SCp.sent_command = 0; - current_SC->SCp.phase = in_arbitration; - - /* Start arbitration */ - outb(0x00, Interrupt_Cntl_port); - outb(0x00, SCSI_Cntl_port); /* Disable data drivers */ - outb(adapter_mask, SCSI_Data_NoACK_port); /* Set our id bit */ - in_command = 1; - outb(0x20, Interrupt_Cntl_port); - outb(0x14 | PARITY_MASK, TMC_Cntl_port); /* Start arbitration */ - - return 0; -} - -static DEF_SCSI_QCMD(fd_mcs_queue) - -#if DEBUG_ABORT || DEBUG_RESET -static void fd_mcs_print_info(Scsi_Cmnd * SCpnt) -{ - unsigned int imr; - unsigned int irr; - unsigned int isr; - struct Scsi_Host *shpnt = SCpnt->host; - - if (!SCpnt || !SCpnt->host) { - printk("fd_mcs: cannot provide detailed information\n"); - } - - printk("%s\n", fd_mcs_info(SCpnt->host)); - print_banner(SCpnt->host); - switch (SCpnt->SCp.phase) { - case in_arbitration: - printk("arbitration "); - break; - case in_selection: - printk("selection "); - break; - case in_other: - printk("other "); - break; - default: - printk("unknown "); - break; - } - - printk("(%d), target = %d cmnd = 0x%02x pieces = %d size = %u\n", - SCpnt->SCp.phase, SCpnt->device->id, *(unsigned char *) SCpnt->cmnd, - scsi_sg_count(SCpnt), scsi_bufflen(SCpnt)); - printk("sent_command = %d, have_data_in = %d, timeout = %d\n", SCpnt->SCp.sent_command, SCpnt->SCp.have_data_in, SCpnt->timeout); -#if DEBUG_RACE - printk("in_interrupt_flag = %d\n", in_interrupt_flag); -#endif - - imr = (inb(0x0a1) << 8) + inb(0x21); - outb(0x0a, 0xa0); - irr = inb(0xa0) << 8; - outb(0x0a, 0x20); - irr += inb(0x20); - outb(0x0b, 0xa0); - isr = inb(0xa0) << 8; - outb(0x0b, 0x20); - isr += inb(0x20); - - /* Print out interesting information */ - printk("IMR = 0x%04x", imr); - if (imr & (1 << shpnt->irq)) - printk(" (masked)"); - printk(", IRR = 0x%04x, ISR = 0x%04x\n", irr, isr); - - printk("SCSI Status = 0x%02x\n", inb(SCSI_Status_port)); - printk("TMC Status = 0x%02x", inb(TMC_Status_port)); - if (inb(TMC_Status_port) & 1) - printk(" (interrupt)"); - printk("\n"); - printk("Interrupt Status = 0x%02x", inb(Interrupt_Status_port)); - if (inb(Interrupt_Status_port) & 0x08) - printk(" (enabled)"); - printk("\n"); - if (chip == tmc18c50 || chip == tmc18c30) { - printk("FIFO Status = 0x%02x\n", inb(shpnt->io_port + FIFO_Status)); - printk("Int. Condition = 0x%02x\n", inb(shpnt->io_port + Interrupt_Cond)); - } - printk("Configuration 1 = 0x%02x\n", inb(shpnt->io_port + Configuration1)); - if (chip == tmc18c50 || chip == tmc18c30) - printk("Configuration 2 = 0x%02x\n", inb(shpnt->io_port + Configuration2)); -} -#endif - -static int fd_mcs_abort(Scsi_Cmnd * SCpnt) -{ - struct Scsi_Host *shpnt = SCpnt->device->host; - - unsigned long flags; -#if EVERY_ACCESS || ERRORS_ONLY || DEBUG_ABORT - printk("fd_mcs: abort "); -#endif - - spin_lock_irqsave(shpnt->host_lock, flags); - if (!in_command) { -#if EVERY_ACCESS || ERRORS_ONLY - printk(" (not in command)\n"); -#endif - spin_unlock_irqrestore(shpnt->host_lock, flags); - return FAILED; - } else - printk("\n"); - -#if DEBUG_ABORT - fd_mcs_print_info(SCpnt); -#endif - - fd_mcs_make_bus_idle(shpnt); - - current_SC->SCp.phase |= aborted; - - current_SC->result = DID_ABORT << 16; - - /* Aborts are not done well. . . */ - my_done(shpnt, DID_ABORT << 16); - - spin_unlock_irqrestore(shpnt->host_lock, flags); - return SUCCESS; -} - -static int fd_mcs_bus_reset(Scsi_Cmnd * SCpnt) { - struct Scsi_Host *shpnt = SCpnt->device->host; - unsigned long flags; - -#if DEBUG_RESET - static int called_once = 0; -#endif - -#if ERRORS_ONLY - if (SCpnt) - printk("fd_mcs: SCSI Bus Reset\n"); -#endif - -#if DEBUG_RESET - if (called_once) - fd_mcs_print_info(current_SC); - called_once = 1; -#endif - - spin_lock_irqsave(shpnt->host_lock, flags); - - outb(1, SCSI_Cntl_port); - do_pause(2); - outb(0, SCSI_Cntl_port); - do_pause(115); - outb(0, SCSI_Mode_Cntl_port); - outb(PARITY_MASK, TMC_Cntl_port); - - spin_unlock_irqrestore(shpnt->host_lock, flags); - - /* Unless this is the very first call (i.e., SCPnt == NULL), everything - is probably hosed at this point. We will, however, try to keep - things going by informing the high-level code that we need help. */ - return SUCCESS; -} - -#include <scsi/scsi_ioctl.h> - -static int fd_mcs_biosparam(struct scsi_device * disk, struct block_device *bdev, - sector_t capacity, int *info_array) -{ - unsigned char *p = scsi_bios_ptable(bdev); - int size = capacity; - - /* BIOS >= 3.4 for MCA cards */ - /* This algorithm was provided by Future Domain (much thanks!). */ - - if (p && p[65] == 0xaa && p[64] == 0x55 /* Partition table valid */ - && p[4]) { /* Partition type */ - /* The partition table layout is as follows: - - Start: 0x1b3h - Offset: 0 = partition status - 1 = starting head - 2 = starting sector and cylinder (word, encoded) - 4 = partition type - 5 = ending head - 6 = ending sector and cylinder (word, encoded) - 8 = starting absolute sector (double word) - c = number of sectors (double word) - Signature: 0x1fe = 0x55aa - - So, this algorithm assumes: - 1) the first partition table is in use, - 2) the data in the first entry is correct, and - 3) partitions never divide cylinders - - Note that (1) may be FALSE for NetBSD (and other BSD flavors), - as well as for Linux. Note also, that Linux doesn't pay any - attention to the fields that are used by this algorithm -- it - only uses the absolute sector data. Recent versions of Linux's - fdisk(1) will fill this data in correctly, and forthcoming - versions will check for consistency. - - Checking for a non-zero partition type is not part of the - Future Domain algorithm, but it seemed to be a reasonable thing - to do, especially in the Linux and BSD worlds. */ - - info_array[0] = p[5] + 1; /* heads */ - info_array[1] = p[6] & 0x3f; /* sectors */ - } else { - /* Note that this new method guarantees that there will always be - less than 1024 cylinders on a platter. This is good for drives - up to approximately 7.85GB (where 1GB = 1024 * 1024 kB). */ - if ((unsigned int) size >= 0x7e0000U) - { - info_array[0] = 0xff; /* heads = 255 */ - info_array[1] = 0x3f; /* sectors = 63 */ - } else if ((unsigned int) size >= 0x200000U) { - info_array[0] = 0x80; /* heads = 128 */ - info_array[1] = 0x3f; /* sectors = 63 */ - } else { - info_array[0] = 0x40; /* heads = 64 */ - info_array[1] = 0x20; /* sectors = 32 */ - } - } - /* For both methods, compute the cylinders */ - info_array[2] = (unsigned int) size / (info_array[0] * info_array[1]); - kfree(p); - return 0; -} - -static struct scsi_host_template driver_template = { - .proc_name = "fd_mcs", - .proc_info = fd_mcs_proc_info, - .detect = fd_mcs_detect, - .release = fd_mcs_release, - .info = fd_mcs_info, - .queuecommand = fd_mcs_queue, - .eh_abort_handler = fd_mcs_abort, - .eh_bus_reset_handler = fd_mcs_bus_reset, - .bios_param = fd_mcs_biosparam, - .can_queue = 1, - .this_id = 7, - .sg_tablesize = 64, - .cmd_per_lun = 1, - .use_clustering = DISABLE_CLUSTERING, -}; -#include "scsi_module.c" - -MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/ibmmca.c b/drivers/scsi/ibmmca.c deleted file mode 100644 index cd09132d5d7d..000000000000 --- a/drivers/scsi/ibmmca.c +++ /dev/null @@ -1,2379 +0,0 @@ -/* - Low Level Linux Driver for the IBM Microchannel SCSI Subsystem for - Linux Kernel >= 2.4.0. - Copyright (c) 1995 Strom Systems, Inc. under the terms of the GNU - General Public License. Written by Martin Kolinek, December 1995. - Further development by: Chris Beauregard, Klaus Kudielka, Michael Lang - See the file Documentation/scsi/ibmmca.txt for a detailed description - of this driver, the commandline arguments and the history of its - development. - See the WWW-page: http://www.uni-mainz.de/~langm000/linux.html for latest - updates, info and ADF-files for adapters supported by this driver. - - Alan Cox <alan@lxorguk.ukuu.org.uk> - Updated for Linux 2.5.45 to use the new error handler, cleaned up the - lock macros and did a few unavoidable locking tweaks, plus one locking - fix in the irq and completion path. - - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/ctype.h> -#include <linux/string.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/blkdev.h> -#include <linux/proc_fs.h> -#include <linux/stat.h> -#include <linux/mca.h> -#include <linux/spinlock.h> -#include <linux/init.h> - -#include <asm/io.h> - -#include "scsi.h" -#include <scsi/scsi_host.h> - -/* Common forward declarations for all Linux-versions: */ -static int ibmmca_queuecommand (struct Scsi_Host *, struct scsi_cmnd *); -static int ibmmca_abort (Scsi_Cmnd *); -static int ibmmca_host_reset (Scsi_Cmnd *); -static int ibmmca_biosparam (struct scsi_device *, struct block_device *, sector_t, int *); -static int ibmmca_proc_info(struct Scsi_Host *shpnt, char *buffer, char **start, off_t offset, int length, int inout); - - - -/* current version of this driver-source: */ -#define IBMMCA_SCSI_DRIVER_VERSION "4.0b-ac" - -/* driver configuration */ -#define IM_MAX_HOSTS 8 /* maximum number of host adapters */ -#define IM_RESET_DELAY 60 /* seconds allowed for a reset */ - -/* driver debugging - #undef all for normal operation */ -/* if defined: count interrupts and ignore this special one: */ -#undef IM_DEBUG_TIMEOUT //50 -#define TIMEOUT_PUN 0 -#define TIMEOUT_LUN 0 -/* verbose interrupt: */ -#undef IM_DEBUG_INT -/* verbose queuecommand: */ -#undef IM_DEBUG_CMD -/* verbose queucommand for specific SCSI-device type: */ -#undef IM_DEBUG_CMD_SPEC_DEV -/* verbose device probing */ -#undef IM_DEBUG_PROBE - -/* device type that shall be displayed on syslog (only during debugging): */ -#define IM_DEBUG_CMD_DEVICE TYPE_TAPE - -/* relative addresses of hardware registers on a subsystem */ -#define IM_CMD_REG(h) ((h)->io_port) /*Command Interface, (4 bytes long) */ -#define IM_ATTN_REG(h) ((h)->io_port+4) /*Attention (1 byte) */ -#define IM_CTR_REG(h) ((h)->io_port+5) /*Basic Control (1 byte) */ -#define IM_INTR_REG(h) ((h)->io_port+6) /*Interrupt Status (1 byte, r/o) */ -#define IM_STAT_REG(h) ((h)->io_port+7) /*Basic Status (1 byte, read only) */ - -/* basic I/O-port of first adapter */ -#define IM_IO_PORT 0x3540 -/* maximum number of hosts that can be found */ -#define IM_N_IO_PORT 8 - -/*requests going into the upper nibble of the Attention register */ -/*note: the lower nibble specifies the device(0-14), or subsystem(15) */ -#define IM_IMM_CMD 0x10 /*immediate command */ -#define IM_SCB 0x30 /*Subsystem Control Block command */ -#define IM_LONG_SCB 0x40 /*long Subsystem Control Block command */ -#define IM_EOI 0xe0 /*end-of-interrupt request */ - -/*values for bits 7,1,0 of Basic Control reg. (bits 6-2 reserved) */ -#define IM_HW_RESET 0x80 /*hardware reset */ -#define IM_ENABLE_DMA 0x02 /*enable subsystem's busmaster DMA */ -#define IM_ENABLE_INTR 0x01 /*enable interrupts to the system */ - -/*to interpret the upper nibble of Interrupt Status register */ -/*note: the lower nibble specifies the device(0-14), or subsystem(15) */ -#define IM_SCB_CMD_COMPLETED 0x10 -#define IM_SCB_CMD_COMPLETED_WITH_RETRIES 0x50 -#define IM_LOOP_SCATTER_BUFFER_FULL 0x60 -#define IM_ADAPTER_HW_FAILURE 0x70 -#define IM_IMMEDIATE_CMD_COMPLETED 0xa0 -#define IM_CMD_COMPLETED_WITH_FAILURE 0xc0 -#define IM_CMD_ERROR 0xe0 -#define IM_SOFTWARE_SEQUENCING_ERROR 0xf0 - -/*to interpret bits 3-0 of Basic Status register (bits 7-4 reserved) */ -#define IM_CMD_REG_FULL 0x08 -#define IM_CMD_REG_EMPTY 0x04 -#define IM_INTR_REQUEST 0x02 -#define IM_BUSY 0x01 - -/*immediate commands (word written into low 2 bytes of command reg) */ -#define IM_RESET_IMM_CMD 0x0400 -#define IM_FEATURE_CTR_IMM_CMD 0x040c -#define IM_DMA_PACING_IMM_CMD 0x040d -#define IM_ASSIGN_IMM_CMD 0x040e -#define IM_ABORT_IMM_CMD 0x040f -#define IM_FORMAT_PREP_IMM_CMD 0x0417 - -/*SCB (Subsystem Control Block) structure */ -struct im_scb { - unsigned short command; /*command word (read, etc.) */ - unsigned short enable; /*enable word, modifies cmd */ - union { - unsigned long log_blk_adr; /*block address on SCSI device */ - unsigned char scsi_cmd_length; /*6,10,12, for other scsi cmd */ - } u1; - unsigned long sys_buf_adr; /*physical system memory adr */ - unsigned long sys_buf_length; /*size of sys mem buffer */ - unsigned long tsb_adr; /*Termination Status Block adr */ - unsigned long scb_chain_adr; /*optional SCB chain address */ - union { - struct { - unsigned short count; /*block count, on SCSI device */ - unsigned short length; /*block length, on SCSI device */ - } blk; - unsigned char scsi_command[12]; /*other scsi command */ - } u2; -}; - -/*structure scatter-gather element (for list of system memory areas) */ -struct im_sge { - void *address; - unsigned long byte_length; -}; - -/*structure returned by a get_pos_info command: */ -struct im_pos_info { - unsigned short pos_id; /* adapter id */ - unsigned char pos_3a; /* pos 3 (if pos 6 = 0) */ - unsigned char pos_2; /* pos 2 */ - unsigned char int_level; /* interrupt level IRQ 11 or 14 */ - unsigned char pos_4a; /* pos 4 (if pos 6 = 0) */ - unsigned short connector_size; /* MCA connector size: 16 or 32 Bit */ - unsigned char num_luns; /* number of supported luns per device */ - unsigned char num_puns; /* number of supported puns */ - unsigned char pacing_factor; /* pacing factor */ - unsigned char num_ldns; /* number of ldns available */ - unsigned char eoi_off; /* time EOI and interrupt inactive */ - unsigned char max_busy; /* time between reset and busy on */ - unsigned short cache_stat; /* ldn cachestat. Bit=1 = not cached */ - unsigned short retry_stat; /* retry status of ldns. Bit=1=disabled */ - unsigned char pos_4b; /* pos 4 (if pos 6 = 1) */ - unsigned char pos_3b; /* pos 3 (if pos 6 = 1) */ - unsigned char pos_6; /* pos 6 */ - unsigned char pos_5; /* pos 5 */ - unsigned short max_overlap; /* maximum overlapping requests */ - unsigned short num_bus; /* number of SCSI-busses */ -}; - -/*values for SCB command word */ -#define IM_NO_SYNCHRONOUS 0x0040 /*flag for any command */ -#define IM_NO_DISCONNECT 0x0080 /*flag for any command */ -#define IM_READ_DATA_CMD 0x1c01 -#define IM_WRITE_DATA_CMD 0x1c02 -#define IM_READ_VERIFY_CMD 0x1c03 -#define IM_WRITE_VERIFY_CMD 0x1c04 -#define IM_REQUEST_SENSE_CMD 0x1c08 -#define IM_READ_CAPACITY_CMD 0x1c09 -#define IM_DEVICE_INQUIRY_CMD 0x1c0b -#define IM_READ_LOGICAL_CMD 0x1c2a -#define IM_OTHER_SCSI_CMD_CMD 0x241f - -/* unused, but supported, SCB commands */ -#define IM_GET_COMMAND_COMPLETE_STATUS_CMD 0x1c07 /* command status */ -#define IM_GET_POS_INFO_CMD 0x1c0a /* returns neat stuff */ -#define IM_READ_PREFETCH_CMD 0x1c31 /* caching controller only */ -#define IM_FOMAT_UNIT_CMD 0x1c16 /* format unit */ -#define IM_REASSIGN_BLOCK_CMD 0x1c18 /* in case of error */ - -/*values to set bits in the enable word of SCB */ -#define IM_READ_CONTROL 0x8000 -#define IM_REPORT_TSB_ONLY_ON_ERROR 0x4000 -#define IM_RETRY_ENABLE 0x2000 -#define IM_POINTER_TO_LIST 0x1000 -#define IM_SUPRESS_EXCEPTION_SHORT 0x0400 -#define IM_BYPASS_BUFFER 0x0200 -#define IM_CHAIN_ON_NO_ERROR 0x0001 - -/*TSB (Termination Status Block) structure */ -struct im_tsb { - unsigned short end_status; - unsigned short reserved1; - unsigned long residual_byte_count; - unsigned long sg_list_element_adr; - unsigned short status_length; - unsigned char dev_status; - unsigned char cmd_status; - unsigned char dev_error; - unsigned char cmd_error; - unsigned short reserved2; - unsigned short reserved3; - unsigned short low_of_last_scb_adr; - unsigned short high_of_last_scb_adr; -}; - -/*subsystem uses interrupt request level 14 */ -#define IM_IRQ 14 -/*SCSI-2 F/W may evade to interrupt 11 */ -#define IM_IRQ_FW 11 - -/* Model 95 has an additional alphanumeric display, which can be used - to display SCSI-activities. 8595 models do not have any disk led, which - makes this feature quite useful. - The regular PS/2 disk led is turned on/off by bits 6,7 of system - control port. */ - -/* LED display-port (actually, last LED on display) */ -#define MOD95_LED_PORT 0x108 -/* system-control-register of PS/2s with diskindicator */ -#define PS2_SYS_CTR 0x92 -/* activity displaying methods */ -#define LED_DISP 1 -#define LED_ADISP 2 -#define LED_ACTIVITY 4 -/* failed intr */ -#define CMD_FAIL 255 - -/* The SCSI-ID(!) of the accessed SCSI-device is shown on PS/2-95 machines' LED - displays. ldn is no longer displayed here, because the ldn mapping is now - done dynamically and the ldn <-> pun,lun maps can be looked-up at boottime - or during uptime in /proc/scsi/ibmmca/<host_no> in case of trouble, - interest, debugging or just for having fun. The left number gives the - host-adapter number and the right shows the accessed SCSI-ID. */ - -/* display_mode is set by the ibmmcascsi= command line arg */ -static int display_mode = 0; -/* set default adapter timeout */ -static unsigned int adapter_timeout = 45; -/* for probing on feature-command: */ -static unsigned int global_command_error_excuse = 0; -/* global setting by command line for adapter_speed */ -static int global_adapter_speed = 0; /* full speed by default */ - -/* Panel / LED on, do it right for F/W addressin, too. adisplay will - * just ignore ids>7, as the panel has only 7 digits available */ -#define PS2_DISK_LED_ON(ad,id) { if (display_mode & LED_DISP) { if (id>9) \ - outw((ad+48)|((id+55)<<8), MOD95_LED_PORT ); else \ - outw((ad+48)|((id+48)<<8), MOD95_LED_PORT ); } else \ - if (display_mode & LED_ADISP) { if (id<7) outb((char)(id+48),MOD95_LED_PORT+1+id); \ - outb((char)(ad+48), MOD95_LED_PORT); } \ - if ((display_mode & LED_ACTIVITY)||(!display_mode)) \ - outb(inb(PS2_SYS_CTR) | 0xc0, PS2_SYS_CTR); } - -/* Panel / LED off */ -/* bug fixed, Dec 15, 1997, where | was replaced by & here */ -#define PS2_DISK_LED_OFF() { if (display_mode & LED_DISP) \ - outw(0x2020, MOD95_LED_PORT ); else if (display_mode & LED_ADISP) { \ - outl(0x20202020,MOD95_LED_PORT); outl(0x20202020,MOD95_LED_PORT+4); } \ - if ((display_mode & LED_ACTIVITY)||(!display_mode)) \ - outb(inb(PS2_SYS_CTR) & 0x3f, PS2_SYS_CTR); } - -/* types of different supported hardware that goes to hostdata special */ -#define IBM_SCSI2_FW 0 -#define IBM_7568_WCACHE 1 -#define IBM_EXP_UNIT 2 -#define IBM_SCSI_WCACHE 3 -#define IBM_SCSI 4 -#define IBM_INTEGSCSI 5 - -/* other special flags for hostdata structure */ -#define FORCED_DETECTION 100 -#define INTEGRATED_SCSI 101 - -/* List of possible IBM-SCSI-adapters */ -static short ibmmca_id_table[] = { - 0x8efc, - 0x8efd, - 0x8ef8, - 0x8eff, - 0x8efe, - /* No entry for integrated SCSI, that's part of the register */ - 0 -}; - -static const char *ibmmca_description[] = { - "IBM SCSI-2 F/W Adapter", /* special = 0 */ - "IBM 7568 Industrial Computer SCSI Adapter w/Cache", /* special = 1 */ - "IBM Expansion Unit SCSI Controller", /* special = 2 */ - "IBM SCSI Adapter w/Cache", /* special = 3 */ - "IBM SCSI Adapter", /* special = 4 */ - "IBM Integrated SCSI Controller", /* special = 5 */ -}; - -/* Max number of logical devices (can be up from 0 to 14). 15 is the address -of the adapter itself. */ -#define MAX_LOG_DEV 15 - -/*local data for a logical device */ -struct logical_device { - struct im_scb scb; /* SCSI-subsystem-control-block structure */ - struct im_tsb tsb; /* SCSI command complete status block structure */ - struct im_sge sge[16]; /* scatter gather list structure */ - unsigned char buf[256]; /* SCSI command return data buffer */ - Scsi_Cmnd *cmd; /* SCSI-command that is currently in progress */ - int device_type; /* type of the SCSI-device. See include/scsi/scsi.h - for interpretation of the possible values */ - int block_length; /* blocksize of a particular logical SCSI-device */ - int cache_flag; /* 1 if this is uncached, 0 if cache is present for ldn */ - int retry_flag; /* 1 if adapter retry is disabled, 0 if enabled */ -}; - -/* statistics of the driver during operations (for proc_info) */ -struct Driver_Statistics { - /* SCSI statistics on the adapter */ - int ldn_access[MAX_LOG_DEV + 1]; /* total accesses on a ldn */ - int ldn_read_access[MAX_LOG_DEV + 1]; /* total read-access on a ldn */ - int ldn_write_access[MAX_LOG_DEV + 1]; /* total write-access on a ldn */ - int ldn_inquiry_access[MAX_LOG_DEV + 1]; /* total inquiries on a ldn */ - int ldn_modeselect_access[MAX_LOG_DEV + 1]; /* total mode selects on ldn */ - int scbs; /* short SCBs queued */ - int long_scbs; /* long SCBs queued */ - int total_accesses; /* total accesses on all ldns */ - int total_interrupts; /* total interrupts (should be - same as total_accesses) */ - int total_errors; /* command completed with error */ - /* dynamical assignment statistics */ - int total_scsi_devices; /* number of physical pun,lun */ - int dyn_flag; /* flag showing dynamical mode */ - int dynamical_assignments; /* number of remappings of ldns */ - int ldn_assignments[MAX_LOG_DEV + 1]; /* number of remappings of each - ldn */ -}; - -/* data structure for each host adapter */ -struct ibmmca_hostdata { - /* array of logical devices: */ - struct logical_device _ld[MAX_LOG_DEV + 1]; - /* array to convert (pun, lun) into logical device number: */ - unsigned char _get_ldn[16][8]; - /*array that contains the information about the physical SCSI-devices - attached to this host adapter: */ - unsigned char _get_scsi[16][8]; - /* used only when checking logical devices: */ - int _local_checking_phase_flag; - /* report received interrupt: */ - int _got_interrupt; - /* report termination-status of SCSI-command: */ - int _stat_result; - /* reset status (used only when doing reset): */ - int _reset_status; - /* code of the last SCSI command (needed for panic info): */ - int _last_scsi_command[MAX_LOG_DEV + 1]; - /* identifier of the last SCSI-command type */ - int _last_scsi_type[MAX_LOG_DEV + 1]; - /* last blockcount */ - int _last_scsi_blockcount[MAX_LOG_DEV + 1]; - /* last locgical block address */ - unsigned long _last_scsi_logical_block[MAX_LOG_DEV + 1]; - /* Counter that points on the next reassignable ldn for dynamical - remapping. The default value is 7, that is the first reassignable - number in the list at boottime: */ - int _next_ldn; - /* Statistics-structure for this IBM-SCSI-host: */ - struct Driver_Statistics _IBM_DS; - /* This hostadapters pos-registers pos2 until pos6 */ - unsigned int _pos[8]; - /* assign a special variable, that contains dedicated info about the - adaptertype */ - int _special; - /* connector size on the MCA bus */ - int _connector_size; - /* synchronous SCSI transfer rate bitpattern */ - int _adapter_speed; -}; - -/* macros to access host data structure */ -#define subsystem_pun(h) ((h)->this_id) -#define subsystem_maxid(h) ((h)->max_id) -#define ld(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_ld) -#define get_ldn(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_get_ldn) -#define get_scsi(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_get_scsi) -#define local_checking_phase_flag(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_local_checking_phase_flag) -#define got_interrupt(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_got_interrupt) -#define stat_result(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_stat_result) -#define reset_status(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_reset_status) -#define last_scsi_command(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_last_scsi_command) -#define last_scsi_type(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_last_scsi_type) -#define last_scsi_blockcount(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_last_scsi_blockcount) -#define last_scsi_logical_block(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_last_scsi_logical_block) -#define last_scsi_type(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_last_scsi_type) -#define next_ldn(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_next_ldn) -#define IBM_DS(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_IBM_DS) -#define special(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_special) -#define subsystem_connector_size(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_connector_size) -#define adapter_speed(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_adapter_speed) -#define pos2(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_pos[2]) -#define pos3(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_pos[3]) -#define pos4(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_pos[4]) -#define pos5(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_pos[5]) -#define pos6(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_pos[6]) - -/* Define a arbitrary number as subsystem-marker-type. This number is, as - described in the ANSI-SCSI-standard, not occupied by other device-types. */ -#define TYPE_IBM_SCSI_ADAPTER 0x2F - -/* Define 0xFF for no device type, because this type is not defined within - the ANSI-SCSI-standard, therefore, it can be used and should not cause any - harm. */ -#define TYPE_NO_DEVICE 0xFF - -/* define medium-changer. If this is not defined previously, e.g. Linux - 2.0.x, define this type here. */ -#ifndef TYPE_MEDIUM_CHANGER -#define TYPE_MEDIUM_CHANGER 0x08 -#endif - -/* define possible operations for the immediate_assign command */ -#define SET_LDN 0 -#define REMOVE_LDN 1 - -/* ldn which is used to probe the SCSI devices */ -#define PROBE_LDN 0 - -/* reset status flag contents */ -#define IM_RESET_NOT_IN_PROGRESS 0 -#define IM_RESET_IN_PROGRESS 1 -#define IM_RESET_FINISHED_OK 2 -#define IM_RESET_FINISHED_FAIL 3 -#define IM_RESET_NOT_IN_PROGRESS_NO_INT 4 -#define IM_RESET_FINISHED_OK_NO_INT 5 - -/* define undefined SCSI-command */ -#define NO_SCSI 0xffff - -/*-----------------------------------------------------------------------*/ - -/* if this is nonzero, ibmmcascsi option has been passed to the kernel */ -static int io_port[IM_MAX_HOSTS] = { 0, 0, 0, 0, 0, 0, 0, 0 }; -static int scsi_id[IM_MAX_HOSTS] = { 7, 7, 7, 7, 7, 7, 7, 7 }; - -/* fill module-parameters only, when this define is present. - (that is kernel version 2.1.x) */ -#if defined(MODULE) -static char *boot_options = NULL; -module_param(boot_options, charp, 0); -module_param_array(io_port, int, NULL, 0); -module_param_array(scsi_id, int, NULL, 0); - -MODULE_LICENSE("GPL"); -#endif -/*counter of concurrent disk read/writes, to turn on/off disk led */ -static int disk_rw_in_progress = 0; - -static unsigned int pos[8]; /* whole pos register-line for diagnosis */ -/* Taking into account the additions, made by ZP Gu. - * This selects now the preset value from the configfile and - * offers the 'normal' commandline option to be accepted */ -#ifdef CONFIG_IBMMCA_SCSI_ORDER_STANDARD -static char ibm_ansi_order = 1; -#else -static char ibm_ansi_order = 0; -#endif - -static void issue_cmd(struct Scsi_Host *, unsigned long, unsigned char); -static void internal_done(Scsi_Cmnd * cmd); -static void check_devices(struct Scsi_Host *, int); -static int immediate_assign(struct Scsi_Host *, unsigned int, unsigned int, unsigned int, unsigned int); -static int immediate_feature(struct Scsi_Host *, unsigned int, unsigned int); -#ifdef CONFIG_IBMMCA_SCSI_DEV_RESET -static int immediate_reset(struct Scsi_Host *, unsigned int); -#endif -static int device_inquiry(struct Scsi_Host *, int); -static int read_capacity(struct Scsi_Host *, int); -static int get_pos_info(struct Scsi_Host *); -static char *ti_p(int); -static char *ti_l(int); -static char *ibmrate(unsigned int, int); -static int probe_display(int); -static int probe_bus_mode(struct Scsi_Host *); -static int device_exists(struct Scsi_Host *, int, int *, int *); -static int option_setup(char *); -/* local functions needed for proc_info */ -static int ldn_access_load(struct Scsi_Host *, int); -static int ldn_access_total_read_write(struct Scsi_Host *); - -static irqreturn_t interrupt_handler(int irq, void *dev_id) -{ - unsigned int intr_reg; - unsigned int cmd_result; - unsigned int ldn; - unsigned long flags; - Scsi_Cmnd *cmd; - int lastSCSI; - struct device *dev = dev_id; - struct Scsi_Host *shpnt = dev_get_drvdata(dev); - - spin_lock_irqsave(shpnt->host_lock, flags); - - if(!(inb(IM_STAT_REG(shpnt)) & IM_INTR_REQUEST)) { - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_NONE; - } - - /* the reset-function already did all the job, even ints got - renabled on the subsystem, so just return */ - if ((reset_status(shpnt) == IM_RESET_NOT_IN_PROGRESS_NO_INT) || (reset_status(shpnt) == IM_RESET_FINISHED_OK_NO_INT)) { - reset_status(shpnt) = IM_RESET_NOT_IN_PROGRESS; - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; - } - - /*must wait for attention reg not busy, then send EOI to subsystem */ - while (1) { - if (!(inb(IM_STAT_REG(shpnt)) & IM_BUSY)) - break; - cpu_relax(); - } - - /*get command result and logical device */ - intr_reg = (unsigned char) (inb(IM_INTR_REG(shpnt))); - cmd_result = intr_reg & 0xf0; - ldn = intr_reg & 0x0f; - /* get the last_scsi_command here */ - lastSCSI = last_scsi_command(shpnt)[ldn]; - outb(IM_EOI | ldn, IM_ATTN_REG(shpnt)); - - /*these should never happen (hw fails, or a local programming bug) */ - if (!global_command_error_excuse) { - switch (cmd_result) { - /* Prevent from Ooopsing on error to show the real reason */ - case IM_ADAPTER_HW_FAILURE: - case IM_SOFTWARE_SEQUENCING_ERROR: - case IM_CMD_ERROR: - printk(KERN_ERR "IBM MCA SCSI: Fatal Subsystem ERROR!\n"); - printk(KERN_ERR " Last cmd=0x%x, ena=%x, len=", lastSCSI, ld(shpnt)[ldn].scb.enable); - if (ld(shpnt)[ldn].cmd) - printk("%ld/%ld,", (long) (scsi_bufflen(ld(shpnt)[ldn].cmd)), (long) (ld(shpnt)[ldn].scb.sys_buf_length)); - else - printk("none,"); - if (ld(shpnt)[ldn].cmd) - printk("Blocksize=%d", ld(shpnt)[ldn].scb.u2.blk.length); - else - printk("Blocksize=none"); - printk(", host=%p, ldn=0x%x\n", shpnt, ldn); - if (ld(shpnt)[ldn].cmd) { - printk(KERN_ERR "Blockcount=%d/%d\n", last_scsi_blockcount(shpnt)[ldn], ld(shpnt)[ldn].scb.u2.blk.count); - printk(KERN_ERR "Logical block=%lx/%lx\n", last_scsi_logical_block(shpnt)[ldn], ld(shpnt)[ldn].scb.u1.log_blk_adr); - } - printk(KERN_ERR "Reason given: %s\n", (cmd_result == IM_ADAPTER_HW_FAILURE) ? "HARDWARE FAILURE" : (cmd_result == IM_SOFTWARE_SEQUENCING_ERROR) ? "SOFTWARE SEQUENCING ERROR" : (cmd_result == IM_CMD_ERROR) ? "COMMAND ERROR" : "UNKNOWN"); - /* if errors appear, enter this section to give detailed info */ - printk(KERN_ERR "IBM MCA SCSI: Subsystem Error-Status follows:\n"); - printk(KERN_ERR " Command Type................: %x\n", last_scsi_type(shpnt)[ldn]); - printk(KERN_ERR " Attention Register..........: %x\n", inb(IM_ATTN_REG(shpnt))); - printk(KERN_ERR " Basic Control Register......: %x\n", inb(IM_CTR_REG(shpnt))); - printk(KERN_ERR " Interrupt Status Register...: %x\n", intr_reg); - printk(KERN_ERR " Basic Status Register.......: %x\n", inb(IM_STAT_REG(shpnt))); - if ((last_scsi_type(shpnt)[ldn] == IM_SCB) || (last_scsi_type(shpnt)[ldn] == IM_LONG_SCB)) { - printk(KERN_ERR " SCB-Command.................: %x\n", ld(shpnt)[ldn].scb.command); - printk(KERN_ERR " SCB-Enable..................: %x\n", ld(shpnt)[ldn].scb.enable); - printk(KERN_ERR " SCB-logical block address...: %lx\n", ld(shpnt)[ldn].scb.u1.log_blk_adr); - printk(KERN_ERR " SCB-system buffer address...: %lx\n", ld(shpnt)[ldn].scb.sys_buf_adr); - printk(KERN_ERR " SCB-system buffer length....: %lx\n", ld(shpnt)[ldn].scb.sys_buf_length); - printk(KERN_ERR " SCB-tsb address.............: %lx\n", ld(shpnt)[ldn].scb.tsb_adr); - printk(KERN_ERR " SCB-Chain address...........: %lx\n", ld(shpnt)[ldn].scb.scb_chain_adr); - printk(KERN_ERR " SCB-block count.............: %x\n", ld(shpnt)[ldn].scb.u2.blk.count); - printk(KERN_ERR " SCB-block length............: %x\n", ld(shpnt)[ldn].scb.u2.blk.length); - } - printk(KERN_ERR " Send this report to the maintainer.\n"); - panic("IBM MCA SCSI: Fatal error message from the subsystem (0x%X,0x%X)!\n", lastSCSI, cmd_result); - break; - } - } else { - /* The command error handling is made silent, but we tell the - * calling function, that there is a reported error from the - * adapter. */ - switch (cmd_result) { - case IM_ADAPTER_HW_FAILURE: - case IM_SOFTWARE_SEQUENCING_ERROR: - case IM_CMD_ERROR: - global_command_error_excuse = CMD_FAIL; - break; - default: - global_command_error_excuse = 0; - break; - } - } - /* if no panic appeared, increase the interrupt-counter */ - IBM_DS(shpnt).total_interrupts++; - /*only for local checking phase */ - if (local_checking_phase_flag(shpnt)) { - stat_result(shpnt) = cmd_result; - got_interrupt(shpnt) = 1; - reset_status(shpnt) = IM_RESET_FINISHED_OK; - last_scsi_command(shpnt)[ldn] = NO_SCSI; - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; - } - /* handling of commands coming from upper level of scsi driver */ - if (last_scsi_type(shpnt)[ldn] == IM_IMM_CMD) { - /* verify ldn, and may handle rare reset immediate command */ - if ((reset_status(shpnt) == IM_RESET_IN_PROGRESS) && (last_scsi_command(shpnt)[ldn] == IM_RESET_IMM_CMD)) { - if (cmd_result == IM_CMD_COMPLETED_WITH_FAILURE) { - disk_rw_in_progress = 0; - PS2_DISK_LED_OFF(); - reset_status(shpnt) = IM_RESET_FINISHED_FAIL; - } else { - /*reset disk led counter, turn off disk led */ - disk_rw_in_progress = 0; - PS2_DISK_LED_OFF(); - reset_status(shpnt) = IM_RESET_FINISHED_OK; - } - stat_result(shpnt) = cmd_result; - last_scsi_command(shpnt)[ldn] = NO_SCSI; - last_scsi_type(shpnt)[ldn] = 0; - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; - } else if (last_scsi_command(shpnt)[ldn] == IM_ABORT_IMM_CMD) { - /* react on SCSI abort command */ -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: Interrupt from SCSI-abort.\n"); -#endif - disk_rw_in_progress = 0; - PS2_DISK_LED_OFF(); - cmd = ld(shpnt)[ldn].cmd; - ld(shpnt)[ldn].cmd = NULL; - if (cmd_result == IM_CMD_COMPLETED_WITH_FAILURE) - cmd->result = DID_NO_CONNECT << 16; - else - cmd->result = DID_ABORT << 16; - stat_result(shpnt) = cmd_result; - last_scsi_command(shpnt)[ldn] = NO_SCSI; - last_scsi_type(shpnt)[ldn] = 0; - if (cmd->scsi_done) - (cmd->scsi_done) (cmd); /* should be the internal_done */ - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; - } else { - disk_rw_in_progress = 0; - PS2_DISK_LED_OFF(); - reset_status(shpnt) = IM_RESET_FINISHED_OK; - stat_result(shpnt) = cmd_result; - last_scsi_command(shpnt)[ldn] = NO_SCSI; - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; - } - } - last_scsi_command(shpnt)[ldn] = NO_SCSI; - last_scsi_type(shpnt)[ldn] = 0; - cmd = ld(shpnt)[ldn].cmd; - ld(shpnt)[ldn].cmd = NULL; -#ifdef IM_DEBUG_TIMEOUT - if (cmd) { - if ((cmd->target == TIMEOUT_PUN) && (cmd->device->lun == TIMEOUT_LUN)) { - spin_unlock_irqsave(shpnt->host_lock, flags); - printk("IBM MCA SCSI: Ignoring interrupt from pun=%x, lun=%x.\n", cmd->target, cmd->device->lun); - return IRQ_HANDLED; - } - } -#endif - /*if no command structure, just return, else clear cmd */ - if (!cmd) - { - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; - } - -#ifdef IM_DEBUG_INT - printk("cmd=%02x ireg=%02x ds=%02x cs=%02x de=%02x ce=%02x\n", cmd->cmnd[0], intr_reg, ld(shpnt)[ldn].tsb.dev_status, ld(shpnt)[ldn].tsb.cmd_status, ld(shpnt)[ldn].tsb.dev_error, ld(shpnt)[ldn].tsb.cmd_error); -#endif - /*if this is end of media read/write, may turn off PS/2 disk led */ - if ((ld(shpnt)[ldn].device_type != TYPE_NO_LUN) && (ld(shpnt)[ldn].device_type != TYPE_NO_DEVICE)) { - /* only access this, if there was a valid device addressed */ - if (--disk_rw_in_progress == 0) - PS2_DISK_LED_OFF(); - } - - /* IBM describes the status-mask to be 0x1e, but this is not conform - * with SCSI-definition, I suppose, the reason for it is that IBM - * adapters do not support CMD_TERMINATED, TASK_SET_FULL and - * ACA_ACTIVE as returning statusbyte information. (ML) */ - if (cmd_result == IM_CMD_COMPLETED_WITH_FAILURE) { - cmd->result = (unsigned char) (ld(shpnt)[ldn].tsb.dev_status & 0x1e); - IBM_DS(shpnt).total_errors++; - } else - cmd->result = 0; - /* write device status into cmd->result, and call done function */ - if (lastSCSI == NO_SCSI) { /* unexpected interrupt :-( */ - cmd->result |= DID_BAD_INTR << 16; - printk("IBM MCA SCSI: WARNING - Interrupt from non-pending SCSI-command!\n"); - } else /* things went right :-) */ - cmd->result |= DID_OK << 16; - if (cmd->scsi_done) - (cmd->scsi_done) (cmd); - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; -} - -static void issue_cmd(struct Scsi_Host *shpnt, unsigned long cmd_reg, - unsigned char attn_reg) -{ - unsigned long flags; - /* must wait for attention reg not busy */ - while (1) { - spin_lock_irqsave(shpnt->host_lock, flags); - if (!(inb(IM_STAT_REG(shpnt)) & IM_BUSY)) - break; - spin_unlock_irqrestore(shpnt->host_lock, flags); - } - /* write registers and enable system interrupts */ - outl(cmd_reg, IM_CMD_REG(shpnt)); - outb(attn_reg, IM_ATTN_REG(shpnt)); - spin_unlock_irqrestore(shpnt->host_lock, flags); -} - -static void internal_done(Scsi_Cmnd * cmd) -{ - cmd->SCp.Status++; - return; -} - -/* SCSI-SCB-command for device_inquiry */ -static int device_inquiry(struct Scsi_Host *shpnt, int ldn) -{ - int retr; - struct im_scb *scb; - struct im_tsb *tsb; - unsigned char *buf; - - scb = &(ld(shpnt)[ldn].scb); - tsb = &(ld(shpnt)[ldn].tsb); - buf = (unsigned char *) (&(ld(shpnt)[ldn].buf)); - ld(shpnt)[ldn].tsb.dev_status = 0; /* prepare statusblock */ - for (retr = 0; retr < 3; retr++) { - /* fill scb with inquiry command */ - scb->command = IM_DEVICE_INQUIRY_CMD | IM_NO_DISCONNECT; - scb->enable = IM_REPORT_TSB_ONLY_ON_ERROR | IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_RETRY_ENABLE | IM_BYPASS_BUFFER; - last_scsi_command(shpnt)[ldn] = IM_DEVICE_INQUIRY_CMD; - last_scsi_type(shpnt)[ldn] = IM_SCB; - scb->sys_buf_adr = isa_virt_to_bus(buf); - scb->sys_buf_length = 255; /* maximum bufferlength gives max info */ - scb->tsb_adr = isa_virt_to_bus(tsb); - /* issue scb to passed ldn, and busy wait for interrupt */ - got_interrupt(shpnt) = 0; - issue_cmd(shpnt, isa_virt_to_bus(scb), IM_SCB | ldn); - while (!got_interrupt(shpnt)) - barrier(); - - /*if command successful, break */ - if ((stat_result(shpnt) == IM_SCB_CMD_COMPLETED) || (stat_result(shpnt) == IM_SCB_CMD_COMPLETED_WITH_RETRIES)) - return 1; - } - /*if all three retries failed, return "no device at this ldn" */ - if (retr >= 3) - return 0; - else - return 1; -} - -static int read_capacity(struct Scsi_Host *shpnt, int ldn) -{ - int retr; - struct im_scb *scb; - struct im_tsb *tsb; - unsigned char *buf; - - scb = &(ld(shpnt)[ldn].scb); - tsb = &(ld(shpnt)[ldn].tsb); - buf = (unsigned char *) (&(ld(shpnt)[ldn].buf)); - ld(shpnt)[ldn].tsb.dev_status = 0; - for (retr = 0; retr < 3; retr++) { - /*fill scb with read capacity command */ - scb->command = IM_READ_CAPACITY_CMD; - scb->enable = IM_REPORT_TSB_ONLY_ON_ERROR | IM_READ_CONTROL | IM_RETRY_ENABLE | IM_BYPASS_BUFFER; - last_scsi_command(shpnt)[ldn] = IM_READ_CAPACITY_CMD; - last_scsi_type(shpnt)[ldn] = IM_SCB; - scb->sys_buf_adr = isa_virt_to_bus(buf); - scb->sys_buf_length = 8; - scb->tsb_adr = isa_virt_to_bus(tsb); - /*issue scb to passed ldn, and busy wait for interrupt */ - got_interrupt(shpnt) = 0; - issue_cmd(shpnt, isa_virt_to_bus(scb), IM_SCB | ldn); - while (!got_interrupt(shpnt)) - barrier(); - - /*if got capacity, get block length and return one device found */ - if ((stat_result(shpnt) == IM_SCB_CMD_COMPLETED) || (stat_result(shpnt) == IM_SCB_CMD_COMPLETED_WITH_RETRIES)) - return 1; - } - /*if all three retries failed, return "no device at this ldn" */ - if (retr >= 3) - return 0; - else - return 1; -} - -static int get_pos_info(struct Scsi_Host *shpnt) -{ - int retr; - struct im_scb *scb; - struct im_tsb *tsb; - unsigned char *buf; - - scb = &(ld(shpnt)[MAX_LOG_DEV].scb); - tsb = &(ld(shpnt)[MAX_LOG_DEV].tsb); - buf = (unsigned char *) (&(ld(shpnt)[MAX_LOG_DEV].buf)); - ld(shpnt)[MAX_LOG_DEV].tsb.dev_status = 0; - for (retr = 0; retr < 3; retr++) { - /*fill scb with get_pos_info command */ - scb->command = IM_GET_POS_INFO_CMD; - scb->enable = IM_READ_CONTROL | IM_REPORT_TSB_ONLY_ON_ERROR | IM_RETRY_ENABLE | IM_BYPASS_BUFFER; - last_scsi_command(shpnt)[MAX_LOG_DEV] = IM_GET_POS_INFO_CMD; - last_scsi_type(shpnt)[MAX_LOG_DEV] = IM_SCB; - scb->sys_buf_adr = isa_virt_to_bus(buf); - if (special(shpnt) == IBM_SCSI2_FW) - scb->sys_buf_length = 256; /* get all info from F/W adapter */ - else - scb->sys_buf_length = 18; /* get exactly 18 bytes for other SCSI */ - scb->tsb_adr = isa_virt_to_bus(tsb); - /*issue scb to ldn=15, and busy wait for interrupt */ - got_interrupt(shpnt) = 0; - issue_cmd(shpnt, isa_virt_to_bus(scb), IM_SCB | MAX_LOG_DEV); - - /* FIXME: timeout */ - while (!got_interrupt(shpnt)) - barrier(); - - /*if got POS-stuff, get block length and return one device found */ - if ((stat_result(shpnt) == IM_SCB_CMD_COMPLETED) || (stat_result(shpnt) == IM_SCB_CMD_COMPLETED_WITH_RETRIES)) - return 1; - } - /* if all three retries failed, return "no device at this ldn" */ - if (retr >= 3) - return 0; - else - return 1; -} - -/* SCSI-immediate-command for assign. This functions maps/unmaps specific - ldn-numbers on SCSI (PUN,LUN). It is needed for presetting of the - subsystem and for dynamical remapping od ldns. */ -static int immediate_assign(struct Scsi_Host *shpnt, unsigned int pun, - unsigned int lun, unsigned int ldn, - unsigned int operation) -{ - int retr; - unsigned long imm_cmd; - - for (retr = 0; retr < 3; retr++) { - /* select mutation level of the SCSI-adapter */ - switch (special(shpnt)) { - case IBM_SCSI2_FW: - imm_cmd = (unsigned long) (IM_ASSIGN_IMM_CMD); - imm_cmd |= (unsigned long) ((lun & 7) << 24); - imm_cmd |= (unsigned long) ((operation & 1) << 23); - imm_cmd |= (unsigned long) ((pun & 7) << 20) | ((pun & 8) << 24); - imm_cmd |= (unsigned long) ((ldn & 15) << 16); - break; - default: - imm_cmd = inl(IM_CMD_REG(shpnt)); - imm_cmd &= (unsigned long) (0xF8000000); /* keep reserved bits */ - imm_cmd |= (unsigned long) (IM_ASSIGN_IMM_CMD); - imm_cmd |= (unsigned long) ((lun & 7) << 24); - imm_cmd |= (unsigned long) ((operation & 1) << 23); - imm_cmd |= (unsigned long) ((pun & 7) << 20); - imm_cmd |= (unsigned long) ((ldn & 15) << 16); - break; - } - last_scsi_command(shpnt)[MAX_LOG_DEV] = IM_ASSIGN_IMM_CMD; - last_scsi_type(shpnt)[MAX_LOG_DEV] = IM_IMM_CMD; - got_interrupt(shpnt) = 0; - issue_cmd(shpnt, (unsigned long) (imm_cmd), IM_IMM_CMD | MAX_LOG_DEV); - while (!got_interrupt(shpnt)) - barrier(); - - /*if command successful, break */ - if (stat_result(shpnt) == IM_IMMEDIATE_CMD_COMPLETED) - return 1; - } - if (retr >= 3) - return 0; - else - return 1; -} - -static int immediate_feature(struct Scsi_Host *shpnt, unsigned int speed, unsigned int timeout) -{ - int retr; - unsigned long imm_cmd; - - for (retr = 0; retr < 3; retr++) { - /* select mutation level of the SCSI-adapter */ - imm_cmd = IM_FEATURE_CTR_IMM_CMD; - imm_cmd |= (unsigned long) ((speed & 0x7) << 29); - imm_cmd |= (unsigned long) ((timeout & 0x1fff) << 16); - last_scsi_command(shpnt)[MAX_LOG_DEV] = IM_FEATURE_CTR_IMM_CMD; - last_scsi_type(shpnt)[MAX_LOG_DEV] = IM_IMM_CMD; - got_interrupt(shpnt) = 0; - /* we need to run into command errors in order to probe for the - * right speed! */ - global_command_error_excuse = 1; - issue_cmd(shpnt, (unsigned long) (imm_cmd), IM_IMM_CMD | MAX_LOG_DEV); - - /* FIXME: timeout */ - while (!got_interrupt(shpnt)) - barrier(); - if (global_command_error_excuse == CMD_FAIL) { - global_command_error_excuse = 0; - return 2; - } else - global_command_error_excuse = 0; - /*if command successful, break */ - if (stat_result(shpnt) == IM_IMMEDIATE_CMD_COMPLETED) - return 1; - } - if (retr >= 3) - return 0; - else - return 1; -} - -#ifdef CONFIG_IBMMCA_SCSI_DEV_RESET -static int immediate_reset(struct Scsi_Host *shpnt, unsigned int ldn) -{ - int retries; - int ticks; - unsigned long imm_command; - - for (retries = 0; retries < 3; retries++) { - imm_command = inl(IM_CMD_REG(shpnt)); - imm_command &= (unsigned long) (0xFFFF0000); /* keep reserved bits */ - imm_command |= (unsigned long) (IM_RESET_IMM_CMD); - last_scsi_command(shpnt)[ldn] = IM_RESET_IMM_CMD; - last_scsi_type(shpnt)[ldn] = IM_IMM_CMD; - got_interrupt(shpnt) = 0; - reset_status(shpnt) = IM_RESET_IN_PROGRESS; - issue_cmd(shpnt, (unsigned long) (imm_command), IM_IMM_CMD | ldn); - ticks = IM_RESET_DELAY * HZ; - while (reset_status(shpnt) == IM_RESET_IN_PROGRESS && --ticks) { - udelay((1 + 999 / HZ) * 1000); - barrier(); - } - /* if reset did not complete, just complain */ - if (!ticks) { - printk(KERN_ERR "IBM MCA SCSI: reset did not complete within %d seconds.\n", IM_RESET_DELAY); - reset_status(shpnt) = IM_RESET_FINISHED_OK; - /* did not work, finish */ - return 1; - } - /*if command successful, break */ - if (stat_result(shpnt) == IM_IMMEDIATE_CMD_COMPLETED) - return 1; - } - if (retries >= 3) - return 0; - else - return 1; -} -#endif - -/* type-interpreter for physical device numbers */ -static char *ti_p(int dev) -{ - switch (dev) { - case TYPE_IBM_SCSI_ADAPTER: - return ("A"); - case TYPE_DISK: - return ("D"); - case TYPE_TAPE: - return ("T"); - case TYPE_PROCESSOR: - return ("P"); - case TYPE_WORM: - return ("W"); - case TYPE_ROM: - return ("R"); - case TYPE_SCANNER: - return ("S"); - case TYPE_MOD: - return ("M"); - case TYPE_MEDIUM_CHANGER: - return ("C"); - case TYPE_NO_LUN: - return ("+"); /* show NO_LUN */ - } - return ("-"); /* TYPE_NO_DEVICE and others */ -} - -/* interpreter for logical device numbers (ldn) */ -static char *ti_l(int val) -{ - const char hex[16] = "0123456789abcdef"; - static char answer[2]; - - answer[1] = (char) (0x0); - if (val <= MAX_LOG_DEV) - answer[0] = hex[val]; - else - answer[0] = '-'; - return (char *) &answer; -} - -/* transfers bitpattern of the feature command to values in MHz */ -static char *ibmrate(unsigned int speed, int i) -{ - switch (speed) { - case 0: - return i ? "5.00" : "10.00"; - case 1: - return i ? "4.00" : "8.00"; - case 2: - return i ? "3.33" : "6.66"; - case 3: - return i ? "2.86" : "5.00"; - case 4: - return i ? "2.50" : "4.00"; - case 5: - return i ? "2.22" : "3.10"; - case 6: - return i ? "2.00" : "2.50"; - case 7: - return i ? "1.82" : "2.00"; - } - return "---"; -} - -static int probe_display(int what) -{ - static int rotator = 0; - const char rotor[] = "|/-\\"; - - if (!(display_mode & LED_DISP)) - return 0; - if (!what) { - outl(0x20202020, MOD95_LED_PORT); - outl(0x20202020, MOD95_LED_PORT + 4); - } else { - outb('S', MOD95_LED_PORT + 7); - outb('C', MOD95_LED_PORT + 6); - outb('S', MOD95_LED_PORT + 5); - outb('I', MOD95_LED_PORT + 4); - outb('i', MOD95_LED_PORT + 3); - outb('n', MOD95_LED_PORT + 2); - outb('i', MOD95_LED_PORT + 1); - outb((char) (rotor[rotator]), MOD95_LED_PORT); - rotator++; - if (rotator > 3) - rotator = 0; - } - return 0; -} - -static int probe_bus_mode(struct Scsi_Host *shpnt) -{ - struct im_pos_info *info; - int num_bus = 0; - int ldn; - - info = (struct im_pos_info *) (&(ld(shpnt)[MAX_LOG_DEV].buf)); - if (get_pos_info(shpnt)) { - if (info->connector_size & 0xf000) - subsystem_connector_size(shpnt) = 16; - else - subsystem_connector_size(shpnt) = 32; - num_bus |= (info->pos_4b & 8) >> 3; - for (ldn = 0; ldn <= MAX_LOG_DEV; ldn++) { - if ((special(shpnt) == IBM_SCSI_WCACHE) || (special(shpnt) == IBM_7568_WCACHE)) { - if (!((info->cache_stat >> ldn) & 1)) - ld(shpnt)[ldn].cache_flag = 0; - } - if (!((info->retry_stat >> ldn) & 1)) - ld(shpnt)[ldn].retry_flag = 0; - } -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: SCSI-Cache bits: "); - for (ldn = 0; ldn <= MAX_LOG_DEV; ldn++) { - printk("%d", ld(shpnt)[ldn].cache_flag); - } - printk("\nIBM MCA SCSI: SCSI-Retry bits: "); - for (ldn = 0; ldn <= MAX_LOG_DEV; ldn++) { - printk("%d", ld(shpnt)[ldn].retry_flag); - } - printk("\n"); -#endif - } - return num_bus; -} - -/* probing scsi devices */ -static void check_devices(struct Scsi_Host *shpnt, int adaptertype) -{ - int id, lun, ldn, ticks; - int count_devices; /* local counter for connected device */ - int max_pun; - int num_bus; - int speedrun; /* local adapter_speed check variable */ - - /* assign default values to certain variables */ - ticks = 0; - count_devices = 0; - IBM_DS(shpnt).dyn_flag = 0; /* normally no need for dynamical ldn management */ - IBM_DS(shpnt).total_errors = 0; /* set errorcounter to 0 */ - next_ldn(shpnt) = 7; /* next ldn to be assigned is 7, because 0-6 is 'hardwired' */ - - /* initialize the very important driver-informational arrays/structs */ - memset(ld(shpnt), 0, sizeof(ld(shpnt))); - for (ldn = 0; ldn <= MAX_LOG_DEV; ldn++) { - last_scsi_command(shpnt)[ldn] = NO_SCSI; /* emptify last SCSI-command storage */ - last_scsi_type(shpnt)[ldn] = 0; - ld(shpnt)[ldn].cache_flag = 1; - ld(shpnt)[ldn].retry_flag = 1; - } - memset(get_ldn(shpnt), TYPE_NO_DEVICE, sizeof(get_ldn(shpnt))); /* this is essential ! */ - memset(get_scsi(shpnt), TYPE_NO_DEVICE, sizeof(get_scsi(shpnt))); /* this is essential ! */ - for (lun = 0; lun < 8; lun++) { - /* mark the adapter at its pun on all luns */ - get_scsi(shpnt)[subsystem_pun(shpnt)][lun] = TYPE_IBM_SCSI_ADAPTER; - get_ldn(shpnt)[subsystem_pun(shpnt)][lun] = MAX_LOG_DEV; /* make sure, the subsystem - ldn is active for all - luns. */ - } - probe_display(0); /* Supercool display usage during SCSI-probing. */ - /* This makes sense, when booting without any */ - /* monitor connected on model XX95. */ - - /* STEP 1: */ - adapter_speed(shpnt) = global_adapter_speed; - speedrun = adapter_speed(shpnt); - while (immediate_feature(shpnt, speedrun, adapter_timeout) == 2) { - probe_display(1); - if (speedrun == 7) - panic("IBM MCA SCSI: Cannot set Synchronous-Transfer-Rate!\n"); - speedrun++; - if (speedrun > 7) - speedrun = 7; - } - adapter_speed(shpnt) = speedrun; - /* Get detailed information about the current adapter, necessary for - * device operations: */ - num_bus = probe_bus_mode(shpnt); - - /* num_bus contains only valid data for the F/W adapter! */ - if (adaptertype == IBM_SCSI2_FW) { /* F/W SCSI adapter: */ - /* F/W adapter PUN-space extension evaluation: */ - if (num_bus) { - printk(KERN_INFO "IBM MCA SCSI: Separate bus mode (wide-addressing enabled)\n"); - subsystem_maxid(shpnt) = 16; - } else { - printk(KERN_INFO "IBM MCA SCSI: Combined bus mode (wide-addressing disabled)\n"); - subsystem_maxid(shpnt) = 8; - } - printk(KERN_INFO "IBM MCA SCSI: Sync.-Rate (F/W: 20, Int.: 10, Ext.: %s) MBytes/s\n", ibmrate(speedrun, adaptertype)); - } else /* all other IBM SCSI adapters: */ - printk(KERN_INFO "IBM MCA SCSI: Synchronous-SCSI-Transfer-Rate: %s MBytes/s\n", ibmrate(speedrun, adaptertype)); - - /* assign correct PUN device space */ - max_pun = subsystem_maxid(shpnt); - -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: Current SCSI-host index: %d\n", shpnt); - printk("IBM MCA SCSI: Removing default logical SCSI-device mapping."); -#else - printk(KERN_INFO "IBM MCA SCSI: Dev. Order: %s, Mapping (takes <2min): ", (ibm_ansi_order) ? "ANSI" : "New"); -#endif - for (ldn = 0; ldn < MAX_LOG_DEV; ldn++) { - probe_display(1); -#ifdef IM_DEBUG_PROBE - printk("."); -#endif - immediate_assign(shpnt, 0, 0, ldn, REMOVE_LDN); /* remove ldn (wherever) */ - } - lun = 0; /* default lun is 0 */ -#ifndef IM_DEBUG_PROBE - printk("cleared,"); -#endif - /* STEP 2: */ -#ifdef IM_DEBUG_PROBE - printk("\nIBM MCA SCSI: Scanning SCSI-devices."); -#endif - for (id = 0; id < max_pun; id++) -#ifdef CONFIG_SCSI_MULTI_LUN - for (lun = 0; lun < 8; lun++) -#endif - { - probe_display(1); -#ifdef IM_DEBUG_PROBE - printk("."); -#endif - if (id != subsystem_pun(shpnt)) { - /* if pun is not the adapter: */ - /* set ldn=0 to pun,lun */ - immediate_assign(shpnt, id, lun, PROBE_LDN, SET_LDN); - if (device_inquiry(shpnt, PROBE_LDN)) { /* probe device */ - get_scsi(shpnt)[id][lun] = (unsigned char) (ld(shpnt)[PROBE_LDN].buf[0]); - /* entry, even for NO_LUN */ - if (ld(shpnt)[PROBE_LDN].buf[0] != TYPE_NO_LUN) - count_devices++; /* a existing device is found */ - } - /* remove ldn */ - immediate_assign(shpnt, id, lun, PROBE_LDN, REMOVE_LDN); - } - } -#ifndef IM_DEBUG_PROBE - printk("scanned,"); -#endif - /* STEP 3: */ -#ifdef IM_DEBUG_PROBE - printk("\nIBM MCA SCSI: Mapping SCSI-devices."); -#endif - ldn = 0; - lun = 0; -#ifdef CONFIG_SCSI_MULTI_LUN - for (lun = 0; lun < 8 && ldn < MAX_LOG_DEV; lun++) -#endif - for (id = 0; id < max_pun && ldn < MAX_LOG_DEV; id++) { - probe_display(1); -#ifdef IM_DEBUG_PROBE - printk("."); -#endif - if (id != subsystem_pun(shpnt)) { - if (get_scsi(shpnt)[id][lun] != TYPE_NO_LUN && get_scsi(shpnt)[id][lun] != TYPE_NO_DEVICE) { - /* Only map if accepted type. Always enter for - lun == 0 to get no gaps into ldn-mapping for ldn<7. */ - immediate_assign(shpnt, id, lun, ldn, SET_LDN); - get_ldn(shpnt)[id][lun] = ldn; /* map ldn */ - if (device_exists(shpnt, ldn, &ld(shpnt)[ldn].block_length, &ld(shpnt)[ldn].device_type)) { -#ifdef CONFIG_IBMMCA_SCSI_DEV_RESET - printk("resetting device at ldn=%x ... ", ldn); - immediate_reset(shpnt, ldn); -#endif - ldn++; - } else { - /* device vanished, probably because we don't know how to - * handle it or because it has problems */ - if (lun > 0) { - /* remove mapping */ - get_ldn(shpnt)[id][lun] = TYPE_NO_DEVICE; - immediate_assign(shpnt, 0, 0, ldn, REMOVE_LDN); - } else - ldn++; - } - } else if (lun == 0) { - /* map lun == 0, even if no device exists */ - immediate_assign(shpnt, id, lun, ldn, SET_LDN); - get_ldn(shpnt)[id][lun] = ldn; /* map ldn */ - ldn++; - } - } - } - /* STEP 4: */ - - /* map remaining ldns to non-existing devices */ - for (lun = 1; lun < 8 && ldn < MAX_LOG_DEV; lun++) - for (id = 0; id < max_pun && ldn < MAX_LOG_DEV; id++) { - if (get_scsi(shpnt)[id][lun] == TYPE_NO_LUN || get_scsi(shpnt)[id][lun] == TYPE_NO_DEVICE) { - probe_display(1); - /* Map remaining ldns only to NON-existing pun,lun - combinations to make sure an inquiry will fail. - For MULTI_LUN, it is needed to avoid adapter autonome - SCSI-remapping. */ - immediate_assign(shpnt, id, lun, ldn, SET_LDN); - get_ldn(shpnt)[id][lun] = ldn; - ldn++; - } - } -#ifndef IM_DEBUG_PROBE - printk("mapped."); -#endif - printk("\n"); -#ifdef IM_DEBUG_PROBE - if (ibm_ansi_order) - printk("IBM MCA SCSI: Device order: IBM/ANSI (pun=7 is first).\n"); - else - printk("IBM MCA SCSI: Device order: New Industry Standard (pun=0 is first).\n"); -#endif - -#ifdef IM_DEBUG_PROBE - /* Show the physical and logical mapping during boot. */ - printk("IBM MCA SCSI: Determined SCSI-device-mapping:\n"); - printk(" Physical SCSI-Device Map Logical SCSI-Device Map\n"); - printk("ID\\LUN 0 1 2 3 4 5 6 7 ID\\LUN 0 1 2 3 4 5 6 7\n"); - for (id = 0; id < max_pun; id++) { - printk("%2d ", id); - for (lun = 0; lun < 8; lun++) - printk("%2s ", ti_p(get_scsi(shpnt)[id][lun])); - printk(" %2d ", id); - for (lun = 0; lun < 8; lun++) - printk("%2s ", ti_l(get_ldn(shpnt)[id][lun])); - printk("\n"); - } -#endif - - /* assign total number of found SCSI-devices to the statistics struct */ - IBM_DS(shpnt).total_scsi_devices = count_devices; - - /* decide for output in /proc-filesystem, if the configuration of - SCSI-devices makes dynamical reassignment of devices necessary */ - if (count_devices >= MAX_LOG_DEV) - IBM_DS(shpnt).dyn_flag = 1; /* dynamical assignment is necessary */ - else - IBM_DS(shpnt).dyn_flag = 0; /* dynamical assignment is not necessary */ - - /* If no SCSI-devices are assigned, return 1 in order to cause message. */ - if (ldn == 0) - printk("IBM MCA SCSI: Warning: No SCSI-devices found/assigned!\n"); - - /* reset the counters for statistics on the current adapter */ - IBM_DS(shpnt).scbs = 0; - IBM_DS(shpnt).long_scbs = 0; - IBM_DS(shpnt).total_accesses = 0; - IBM_DS(shpnt).total_interrupts = 0; - IBM_DS(shpnt).dynamical_assignments = 0; - memset(IBM_DS(shpnt).ldn_access, 0x0, sizeof(IBM_DS(shpnt).ldn_access)); - memset(IBM_DS(shpnt).ldn_read_access, 0x0, sizeof(IBM_DS(shpnt).ldn_read_access)); - memset(IBM_DS(shpnt).ldn_write_access, 0x0, sizeof(IBM_DS(shpnt).ldn_write_access)); - memset(IBM_DS(shpnt).ldn_inquiry_access, 0x0, sizeof(IBM_DS(shpnt).ldn_inquiry_access)); - memset(IBM_DS(shpnt).ldn_modeselect_access, 0x0, sizeof(IBM_DS(shpnt).ldn_modeselect_access)); - memset(IBM_DS(shpnt).ldn_assignments, 0x0, sizeof(IBM_DS(shpnt).ldn_assignments)); - probe_display(0); - return; -} - -static int device_exists(struct Scsi_Host *shpnt, int ldn, int *block_length, int *device_type) -{ - unsigned char *buf; - /* if no valid device found, return immediately with 0 */ - if (!(device_inquiry(shpnt, ldn))) - return 0; - buf = (unsigned char *) (&(ld(shpnt)[ldn].buf)); - if (*buf == TYPE_ROM) { - *device_type = TYPE_ROM; - *block_length = 2048; /* (standard blocksize for yellow-/red-book) */ - return 1; - } - if (*buf == TYPE_WORM) { - *device_type = TYPE_WORM; - *block_length = 2048; - return 1; - } - if (*buf == TYPE_DISK) { - *device_type = TYPE_DISK; - if (read_capacity(shpnt, ldn)) { - *block_length = *(buf + 7) + (*(buf + 6) << 8) + (*(buf + 5) << 16) + (*(buf + 4) << 24); - return 1; - } else - return 0; - } - if (*buf == TYPE_MOD) { - *device_type = TYPE_MOD; - if (read_capacity(shpnt, ldn)) { - *block_length = *(buf + 7) + (*(buf + 6) << 8) + (*(buf + 5) << 16) + (*(buf + 4) << 24); - return 1; - } else - return 0; - } - if (*buf == TYPE_TAPE) { - *device_type = TYPE_TAPE; - *block_length = 0; /* not in use (setting by mt and mtst in op.) */ - return 1; - } - if (*buf == TYPE_PROCESSOR) { - *device_type = TYPE_PROCESSOR; - *block_length = 0; /* they set their stuff on drivers */ - return 1; - } - if (*buf == TYPE_SCANNER) { - *device_type = TYPE_SCANNER; - *block_length = 0; /* they set their stuff on drivers */ - return 1; - } - if (*buf == TYPE_MEDIUM_CHANGER) { - *device_type = TYPE_MEDIUM_CHANGER; - *block_length = 0; /* One never knows, what to expect on a medium - changer device. */ - return 1; - } - return 0; -} - -static void internal_ibmmca_scsi_setup(char *str, int *ints) -{ - int i, j, io_base, id_base; - char *token; - - io_base = 0; - id_base = 0; - if (str) { - j = 0; - while ((token = strsep(&str, ",")) != NULL) { - if (!strcmp(token, "activity")) - display_mode |= LED_ACTIVITY; - if (!strcmp(token, "display")) - display_mode |= LED_DISP; - if (!strcmp(token, "adisplay")) - display_mode |= LED_ADISP; - if (!strcmp(token, "normal")) - ibm_ansi_order = 0; - if (!strcmp(token, "ansi")) - ibm_ansi_order = 1; - if (!strcmp(token, "fast")) - global_adapter_speed = 0; - if (!strcmp(token, "medium")) - global_adapter_speed = 4; - if (!strcmp(token, "slow")) - global_adapter_speed = 7; - if ((*token == '-') || (isdigit(*token))) { - if (!(j % 2) && (io_base < IM_MAX_HOSTS)) - io_port[io_base++] = simple_strtoul(token, NULL, 0); - if ((j % 2) && (id_base < IM_MAX_HOSTS)) - scsi_id[id_base++] = simple_strtoul(token, NULL, 0); - j++; - } - } - } else if (ints) { - for (i = 0; i < IM_MAX_HOSTS && 2 * i + 2 < ints[0]; i++) { - io_port[i] = ints[2 * i + 2]; - scsi_id[i] = ints[2 * i + 2]; - } - } - return; -} - -#if 0 - FIXME NEED TO MOVE TO SYSFS - -static int ibmmca_getinfo(char *buf, int slot, void *dev_id) -{ - struct Scsi_Host *shpnt; - int len, speciale, connectore, k; - unsigned int pos[8]; - unsigned long flags; - struct Scsi_Host *dev = dev_id; - - spin_lock_irqsave(dev->host_lock, flags); - - shpnt = dev; /* assign host-structure to local pointer */ - len = 0; /* set filled text-buffer index to 0 */ - /* get the _special contents of the hostdata structure */ - speciale = ((struct ibmmca_hostdata *) shpnt->hostdata)->_special; - connectore = ((struct ibmmca_hostdata *) shpnt->hostdata)->_connector_size; - for (k = 2; k < 4; k++) - pos[k] = ((struct ibmmca_hostdata *) shpnt->hostdata)->_pos[k]; - if (speciale == FORCED_DETECTION) { /* forced detection */ - len += sprintf(buf + len, - "Adapter category: forced detected\n" "***************************************\n" "*** Forced detected SCSI Adapter ***\n" "*** No chip-information available ***\n" "***************************************\n"); - } else if (speciale == INTEGRATED_SCSI) { - /* if the integrated subsystem has been found automatically: */ - len += sprintf(buf + len, - "Adapter category: integrated\n" "Chip revision level: %d\n" "Chip status: %s\n" "8 kByte NVRAM status: %s\n", ((pos[2] & 0xf0) >> 4), (pos[2] & 1) ? "enabled" : "disabled", (pos[2] & 2) ? "locked" : "accessible"); - } else if ((speciale >= 0) && (speciale < ARRAY_SIZE(subsys_list))) { - /* if the subsystem is a slot adapter */ - len += sprintf(buf + len, "Adapter category: slot-card\n" "ROM Segment Address: "); - if ((pos[2] & 0xf0) == 0xf0) - len += sprintf(buf + len, "off\n"); - else - len += sprintf(buf + len, "0x%x\n", ((pos[2] & 0xf0) << 13) + 0xc0000); - len += sprintf(buf + len, "Chip status: %s\n", (pos[2] & 1) ? "enabled" : "disabled"); - len += sprintf(buf + len, "Adapter I/O Offset: 0x%x\n", ((pos[2] & 0x0e) << 2)); - } else { - len += sprintf(buf + len, "Adapter category: unknown\n"); - } - /* common subsystem information to write to the slotn file */ - len += sprintf(buf + len, "Subsystem PUN: %d\n", shpnt->this_id); - len += sprintf(buf + len, "I/O base address range: 0x%x-0x%x\n", (unsigned int) (shpnt->io_port), (unsigned int) (shpnt->io_port + 7)); - len += sprintf(buf + len, "MCA-slot size: %d bits", connectore); - /* Now make sure, the bufferlength is devidable by 4 to avoid - * paging problems of the buffer. */ - while (len % sizeof(int) != (sizeof(int) - 1)) - len += sprintf(buf + len, " "); - len += sprintf(buf + len, "\n"); - - spin_unlock_irqrestore(shpnt->host_lock, flags); - - return len; -} -#endif - -static struct scsi_host_template ibmmca_driver_template = { - .proc_name = "ibmmca", - .proc_info = ibmmca_proc_info, - .name = "IBM SCSI-Subsystem", - .queuecommand = ibmmca_queuecommand, - .eh_abort_handler = ibmmca_abort, - .eh_host_reset_handler = ibmmca_host_reset, - .bios_param = ibmmca_biosparam, - .can_queue = 16, - .this_id = 7, - .sg_tablesize = 16, - .cmd_per_lun = 1, - .use_clustering = ENABLE_CLUSTERING, -}; - -static int ibmmca_probe(struct device *dev) -{ - struct Scsi_Host *shpnt; - int port, id, i, j, k, irq, enabled, ret = -EINVAL; - struct mca_device *mca_dev = to_mca_device(dev); - const char *description = ibmmca_description[mca_dev->index]; - - /* First of all, print the version number of the driver. This is - * important to allow better user bugreports in case of already - * having problems with the MCA_bus probing. */ - printk(KERN_INFO "IBM MCA SCSI: Version %s\n", IBMMCA_SCSI_DRIVER_VERSION); - /* The POS2-register of all PS/2 model SCSI-subsystems has the following - * interpretation of bits: - * Bit 7 - 4 : Chip Revision ID (Release) - * Bit 3 - 2 : Reserved - * Bit 1 : 8k NVRAM Disabled - * Bit 0 : Chip Enable (EN-Signal) - * The POS3-register is interpreted as follows: - * Bit 7 - 5 : SCSI ID - * Bit 4 : Reserved = 0 - * Bit 3 - 0 : Reserved = 0 - * (taken from "IBM, PS/2 Hardware Interface Technical Reference, Common - * Interfaces (1991)"). - * In short words, this means, that IBM PS/2 machines only support - * 1 single subsystem by default. The slot-adapters must have another - * configuration on pos2. Here, one has to assume the following - * things for POS2-register: - * Bit 7 - 4 : Chip Revision ID (Release) - * Bit 3 - 1 : port offset factor - * Bit 0 : Chip Enable (EN-Signal) - * As I found a patch here, setting the IO-registers to 0x3540 forced, - * as there was a 0x05 in POS2 on a model 56, I assume, that the - * port 0x3540 must be fix for integrated SCSI-controllers. - * Ok, this discovery leads to the following implementation: (M.Lang) */ - - /* first look for the IBM SCSI integrated subsystem on the motherboard */ - for (j = 0; j < 8; j++) /* read the pos-information */ - pos[j] = mca_device_read_pos(mca_dev, j); - id = (pos[3] & 0xe0) >> 5; /* this is correct and represents the PUN */ - enabled = (pos[2] &0x01); - if (!enabled) { - printk(KERN_WARNING "IBM MCA SCSI: WARNING - Your SCSI-subsystem is disabled!\n"); - printk(KERN_WARNING " SCSI-operations may not work.\n"); - } - - /* pos2 = pos3 = 0xff if there is no integrated SCSI-subsystem present, but - * if we ignore the settings of all surrounding pos registers, it is not - * completely sufficient to only check pos2 and pos3. */ - /* Therefore, now the following if statement is used to - * make sure, we see a real integrated onboard SCSI-interface and no - * internal system information, which gets mapped to some pos registers - * on models 95xx. */ - if (mca_dev->slot == MCA_INTEGSCSI && - ((!pos[0] && !pos[1] && pos[2] > 0 && - pos[3] > 0 && !pos[4] && !pos[5] && - !pos[6] && !pos[7]) || - (pos[0] == 0xff && pos[1] == 0xff && - pos[2] < 0xff && pos[3] < 0xff && - pos[4] == 0xff && pos[5] == 0xff && - pos[6] == 0xff && pos[7] == 0xff))) { - irq = IM_IRQ; - port = IM_IO_PORT; - } else { - irq = IM_IRQ; - port = IM_IO_PORT + ((pos[2] &0x0e) << 2); - if ((mca_dev->index == IBM_SCSI2_FW) && (pos[6] != 0)) { - printk(KERN_ERR "IBM MCA SCSI: ERROR - Wrong POS(6)-register setting!\n"); - printk(KERN_ERR " Impossible to determine adapter PUN!\n"); - printk(KERN_ERR " Guessing adapter PUN = 7.\n"); - id = 7; - } else { - id = (pos[3] & 0xe0) >> 5; /* get subsystem PUN */ - if (mca_dev->index == IBM_SCSI2_FW) { - id |= (pos[3] & 0x10) >> 1; /* get subsystem PUN high-bit - * for F/W adapters */ - } - } - if ((mca_dev->index == IBM_SCSI2_FW) && - (pos[4] & 0x01) && (pos[6] == 0)) { - /* IRQ11 is used by SCSI-2 F/W Adapter/A */ - printk(KERN_DEBUG "IBM MCA SCSI: SCSI-2 F/W adapter needs IRQ 11.\n"); - irq = IM_IRQ_FW; - } - } - - - - /* give detailed information on the subsystem. This helps me - * additionally during debugging and analyzing bug-reports. */ - printk(KERN_INFO "IBM MCA SCSI: %s found, io=0x%x, scsi id=%d,\n", - description, port, id); - if (mca_dev->slot == MCA_INTEGSCSI) - printk(KERN_INFO " chip rev.=%d, 8K NVRAM=%s, subsystem=%s\n", ((pos[2] & 0xf0) >> 4), (pos[2] & 2) ? "locked" : "accessible", (pos[2] & 1) ? "enabled." : "disabled."); - else { - if ((pos[2] & 0xf0) == 0xf0) - printk(KERN_DEBUG " ROM Addr.=off,"); - else - printk(KERN_DEBUG " ROM Addr.=0x%x,", ((pos[2] & 0xf0) << 13) + 0xc0000); - - printk(KERN_DEBUG " port-offset=0x%x, subsystem=%s\n", ((pos[2] & 0x0e) << 2), (pos[2] & 1) ? "enabled." : "disabled."); - } - - /* check I/O region */ - if (!request_region(port, IM_N_IO_PORT, description)) { - printk(KERN_ERR "IBM MCA SCSI: Unable to get I/O region 0x%x-0x%x (%d ports).\n", port, port + IM_N_IO_PORT - 1, IM_N_IO_PORT); - goto out_fail; - } - - /* register host */ - shpnt = scsi_host_alloc(&ibmmca_driver_template, - sizeof(struct ibmmca_hostdata)); - if (!shpnt) { - printk(KERN_ERR "IBM MCA SCSI: Unable to register host.\n"); - goto out_release; - } - - dev_set_drvdata(dev, shpnt); - if(request_irq(irq, interrupt_handler, IRQF_SHARED, description, dev)) { - printk(KERN_ERR "IBM MCA SCSI: failed to request interrupt %d\n", irq); - goto out_free_host; - } - - /* request I/O region */ - special(shpnt) = mca_dev->index; /* important assignment or else crash! */ - subsystem_connector_size(shpnt) = 0; /* preset slot-size */ - shpnt->irq = irq; /* assign necessary stuff for the adapter */ - shpnt->io_port = port; - shpnt->n_io_port = IM_N_IO_PORT; - shpnt->this_id = id; - shpnt->max_id = 8; /* 8 PUNs are default */ - /* now, the SCSI-subsystem is connected to Linux */ - -#ifdef IM_DEBUG_PROBE - ctrl = (unsigned int) (inb(IM_CTR_REG(found))); /* get control-register status */ - printk("IBM MCA SCSI: Control Register contents: %x, status: %x\n", ctrl, inb(IM_STAT_REG(found))); - printk("IBM MCA SCSI: This adapters' POS-registers: "); - for (i = 0; i < 8; i++) - printk("%x ", pos[i]); - printk("\n"); -#endif - reset_status(shpnt) = IM_RESET_NOT_IN_PROGRESS; - - for (i = 0; i < 16; i++) /* reset the tables */ - for (j = 0; j < 8; j++) - get_ldn(shpnt)[i][j] = MAX_LOG_DEV; - - /* check which logical devices exist */ - /* after this line, local interrupting is possible: */ - local_checking_phase_flag(shpnt) = 1; - check_devices(shpnt, mca_dev->index); /* call by value, using the global variable hosts */ - local_checking_phase_flag(shpnt) = 0; - - /* an ibm mca subsystem has been detected */ - - for (k = 2; k < 7; k++) - ((struct ibmmca_hostdata *) shpnt->hostdata)->_pos[k] = pos[k]; - ((struct ibmmca_hostdata *) shpnt->hostdata)->_special = INTEGRATED_SCSI; - mca_device_set_name(mca_dev, description); - /* FIXME: NEED TO REPLUMB TO SYSFS - mca_set_adapter_procfn(MCA_INTEGSCSI, (MCA_ProcFn) ibmmca_getinfo, shpnt); - */ - mca_device_set_claim(mca_dev, 1); - if (scsi_add_host(shpnt, dev)) { - dev_printk(KERN_ERR, dev, "IBM MCA SCSI: scsi_add_host failed\n"); - goto out_free_host; - } - scsi_scan_host(shpnt); - - return 0; - out_free_host: - scsi_host_put(shpnt); - out_release: - release_region(port, IM_N_IO_PORT); - out_fail: - return ret; -} - -static int __devexit ibmmca_remove(struct device *dev) -{ - struct Scsi_Host *shpnt = dev_get_drvdata(dev); - scsi_remove_host(shpnt); - release_region(shpnt->io_port, shpnt->n_io_port); - free_irq(shpnt->irq, dev); - scsi_host_put(shpnt); - return 0; -} - -/* The following routine is the SCSI command queue for the midlevel driver */ -static int ibmmca_queuecommand_lck(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *)) -{ - unsigned int ldn; - unsigned int scsi_cmd; - struct im_scb *scb; - struct Scsi_Host *shpnt; - int current_ldn; - int id, lun; - int target; - int max_pun; - int i; - struct scatterlist *sg; - - shpnt = cmd->device->host; - - max_pun = subsystem_maxid(shpnt); - if (ibm_ansi_order) { - target = max_pun - 1 - cmd->device->id; - if ((target <= subsystem_pun(shpnt)) && (cmd->device->id <= subsystem_pun(shpnt))) - target--; - else if ((target >= subsystem_pun(shpnt)) && (cmd->device->id >= subsystem_pun(shpnt))) - target++; - } else - target = cmd->device->id; - - /* if (target,lun) is NO LUN or not existing at all, return error */ - if ((get_scsi(shpnt)[target][cmd->device->lun] == TYPE_NO_LUN) || (get_scsi(shpnt)[target][cmd->device->lun] == TYPE_NO_DEVICE)) { - cmd->result = DID_NO_CONNECT << 16; - if (done) - done(cmd); - return 0; - } - - /*if (target,lun) unassigned, do further checks... */ - ldn = get_ldn(shpnt)[target][cmd->device->lun]; - if (ldn >= MAX_LOG_DEV) { /* on invalid ldn do special stuff */ - if (ldn > MAX_LOG_DEV) { /* dynamical remapping if ldn unassigned */ - current_ldn = next_ldn(shpnt); /* stop-value for one circle */ - while (ld(shpnt)[next_ldn(shpnt)].cmd) { /* search for a occupied, but not in */ - /* command-processing ldn. */ - next_ldn(shpnt)++; - if (next_ldn(shpnt) >= MAX_LOG_DEV) - next_ldn(shpnt) = 7; - if (current_ldn == next_ldn(shpnt)) { /* One circle done ? */ - /* no non-processing ldn found */ - scmd_printk(KERN_WARNING, cmd, - "IBM MCA SCSI: Cannot assign SCSI-device dynamically!\n" - " On ldn 7-14 SCSI-commands everywhere in progress.\n" - " Reporting DID_NO_CONNECT for device.\n"); - cmd->result = DID_NO_CONNECT << 16; /* return no connect */ - if (done) - done(cmd); - return 0; - } - } - - /* unmap non-processing ldn */ - for (id = 0; id < max_pun; id++) - for (lun = 0; lun < 8; lun++) { - if (get_ldn(shpnt)[id][lun] == next_ldn(shpnt)) { - get_ldn(shpnt)[id][lun] = TYPE_NO_DEVICE; - get_scsi(shpnt)[id][lun] = TYPE_NO_DEVICE; - /* unmap entry */ - } - } - /* set reduced interrupt_handler-mode for checking */ - local_checking_phase_flag(shpnt) = 1; - /* map found ldn to pun,lun */ - get_ldn(shpnt)[target][cmd->device->lun] = next_ldn(shpnt); - /* change ldn to the right value, that is now next_ldn */ - ldn = next_ldn(shpnt); - /* unassign all ldns (pun,lun,ldn does not matter for remove) */ - immediate_assign(shpnt, 0, 0, 0, REMOVE_LDN); - /* set only LDN for remapped device */ - immediate_assign(shpnt, target, cmd->device->lun, ldn, SET_LDN); - /* get device information for ld[ldn] */ - if (device_exists(shpnt, ldn, &ld(shpnt)[ldn].block_length, &ld(shpnt)[ldn].device_type)) { - ld(shpnt)[ldn].cmd = NULL; /* To prevent panic set 0, because - devices that were not assigned, - should have nothing in progress. */ - get_scsi(shpnt)[target][cmd->device->lun] = ld(shpnt)[ldn].device_type; - /* increase assignment counters for statistics in /proc */ - IBM_DS(shpnt).dynamical_assignments++; - IBM_DS(shpnt).ldn_assignments[ldn]++; - } else - /* panic here, because a device, found at boottime has - vanished */ - panic("IBM MCA SCSI: ldn=0x%x, SCSI-device on (%d,%d) vanished!\n", ldn, target, cmd->device->lun); - /* unassign again all ldns (pun,lun,ldn does not matter for remove) */ - immediate_assign(shpnt, 0, 0, 0, REMOVE_LDN); - /* remap all ldns, as written in the pun/lun table */ - lun = 0; -#ifdef CONFIG_SCSI_MULTI_LUN - for (lun = 0; lun < 8; lun++) -#endif - for (id = 0; id < max_pun; id++) { - if (get_ldn(shpnt)[id][lun] <= MAX_LOG_DEV) - immediate_assign(shpnt, id, lun, get_ldn(shpnt)[id][lun], SET_LDN); - } - /* set back to normal interrupt_handling */ - local_checking_phase_flag(shpnt) = 0; -#ifdef IM_DEBUG_PROBE - /* Information on syslog terminal */ - printk("IBM MCA SCSI: ldn=0x%x dynamically reassigned to (%d,%d).\n", ldn, target, cmd->device->lun); -#endif - /* increase next_ldn for next dynamical assignment */ - next_ldn(shpnt)++; - if (next_ldn(shpnt) >= MAX_LOG_DEV) - next_ldn(shpnt) = 7; - } else { /* wall against Linux accesses to the subsystem adapter */ - cmd->result = DID_BAD_TARGET << 16; - if (done) - done(cmd); - return 0; - } - } - - /*verify there is no command already in progress for this log dev */ - if (ld(shpnt)[ldn].cmd) - panic("IBM MCA SCSI: cmd already in progress for this ldn.\n"); - - /*save done in cmd, and save cmd for the interrupt handler */ - cmd->scsi_done = done; - ld(shpnt)[ldn].cmd = cmd; - - /*fill scb information independent of the scsi command */ - scb = &(ld(shpnt)[ldn].scb); - ld(shpnt)[ldn].tsb.dev_status = 0; - scb->enable = IM_REPORT_TSB_ONLY_ON_ERROR | IM_RETRY_ENABLE; - scb->tsb_adr = isa_virt_to_bus(&(ld(shpnt)[ldn].tsb)); - scsi_cmd = cmd->cmnd[0]; - - if (scsi_sg_count(cmd)) { - BUG_ON(scsi_sg_count(cmd) > 16); - - scsi_for_each_sg(cmd, sg, scsi_sg_count(cmd), i) { - ld(shpnt)[ldn].sge[i].address = (void *) (isa_page_to_bus(sg_page(sg)) + sg->offset); - ld(shpnt)[ldn].sge[i].byte_length = sg->length; - } - scb->enable |= IM_POINTER_TO_LIST; - scb->sys_buf_adr = isa_virt_to_bus(&(ld(shpnt)[ldn].sge[0])); - scb->sys_buf_length = scsi_sg_count(cmd) * sizeof(struct im_sge); - } else { - scb->sys_buf_adr = isa_virt_to_bus(scsi_sglist(cmd)); - /* recent Linux midlevel SCSI places 1024 byte for inquiry - * command. Far too much for old PS/2 hardware. */ - switch (scsi_cmd) { - /* avoid command errors by setting bufferlengths to - * ANSI-standard. Beware of forcing it to 255, - * this could SEGV the kernel!!! */ - case INQUIRY: - case REQUEST_SENSE: - case MODE_SENSE: - case MODE_SELECT: - if (scsi_bufflen(cmd) > 255) - scb->sys_buf_length = 255; - else - scb->sys_buf_length = scsi_bufflen(cmd); - break; - case TEST_UNIT_READY: - scb->sys_buf_length = 0; - break; - default: - scb->sys_buf_length = scsi_bufflen(cmd); - break; - } - } - /*fill scb information dependent on scsi command */ - -#ifdef IM_DEBUG_CMD - printk("issue scsi cmd=%02x to ldn=%d\n", scsi_cmd, ldn); -#endif - - /* for specific device-type debugging: */ -#ifdef IM_DEBUG_CMD_SPEC_DEV - if (ld(shpnt)[ldn].device_type == IM_DEBUG_CMD_DEVICE) - printk("(SCSI-device-type=0x%x) issue scsi cmd=%02x to ldn=%d\n", ld(shpnt)[ldn].device_type, scsi_cmd, ldn); -#endif - - /* for possible panics store current command */ - last_scsi_command(shpnt)[ldn] = scsi_cmd; - last_scsi_type(shpnt)[ldn] = IM_SCB; - /* update statistical info */ - IBM_DS(shpnt).total_accesses++; - IBM_DS(shpnt).ldn_access[ldn]++; - - switch (scsi_cmd) { - case READ_6: - case WRITE_6: - case READ_10: - case WRITE_10: - case READ_12: - case WRITE_12: - /* Distinguish between disk and other devices. Only disks (that are the - most frequently accessed devices) should be supported by the - IBM-SCSI-Subsystem commands. */ - switch (ld(shpnt)[ldn].device_type) { - case TYPE_DISK: /* for harddisks enter here ... */ - case TYPE_MOD: /* ... try it also for MO-drives (send flames as */ - /* you like, if this won't work.) */ - if (scsi_cmd == READ_6 || scsi_cmd == READ_10 || scsi_cmd == READ_12) { - /* read command preparations */ - scb->enable |= IM_READ_CONTROL; - IBM_DS(shpnt).ldn_read_access[ldn]++; /* increase READ-access on ldn stat. */ - scb->command = IM_READ_DATA_CMD | IM_NO_DISCONNECT; - } else { /* write command preparations */ - IBM_DS(shpnt).ldn_write_access[ldn]++; /* increase write-count on ldn stat. */ - scb->command = IM_WRITE_DATA_CMD | IM_NO_DISCONNECT; - } - if (scsi_cmd == READ_6 || scsi_cmd == WRITE_6) { - scb->u1.log_blk_adr = (((unsigned) cmd->cmnd[3]) << 0) | (((unsigned) cmd->cmnd[2]) << 8) | ((((unsigned) cmd->cmnd[1]) & 0x1f) << 16); - scb->u2.blk.count = (unsigned) cmd->cmnd[4]; - } else { - scb->u1.log_blk_adr = (((unsigned) cmd->cmnd[5]) << 0) | (((unsigned) cmd->cmnd[4]) << 8) | (((unsigned) cmd->cmnd[3]) << 16) | (((unsigned) cmd->cmnd[2]) << 24); - scb->u2.blk.count = (((unsigned) cmd->cmnd[8]) << 0) | (((unsigned) cmd->cmnd[7]) << 8); - } - last_scsi_logical_block(shpnt)[ldn] = scb->u1.log_blk_adr; - last_scsi_blockcount(shpnt)[ldn] = scb->u2.blk.count; - scb->u2.blk.length = ld(shpnt)[ldn].block_length; - break; - /* for other devices, enter here. Other types are not known by - Linux! TYPE_NO_LUN is forbidden as valid device. */ - case TYPE_ROM: - case TYPE_TAPE: - case TYPE_PROCESSOR: - case TYPE_WORM: - case TYPE_SCANNER: - case TYPE_MEDIUM_CHANGER: - /* If there is a sequential-device, IBM recommends to use - IM_OTHER_SCSI_CMD_CMD instead of subsystem READ/WRITE. - This includes CD-ROM devices, too, due to the partial sequential - read capabilities. */ - scb->command = IM_OTHER_SCSI_CMD_CMD; - if (scsi_cmd == READ_6 || scsi_cmd == READ_10 || scsi_cmd == READ_12) - /* enable READ */ - scb->enable |= IM_READ_CONTROL; - scb->enable |= IM_BYPASS_BUFFER; - scb->u1.scsi_cmd_length = cmd->cmd_len; - memcpy(scb->u2.scsi_command, cmd->cmnd, cmd->cmd_len); - last_scsi_type(shpnt)[ldn] = IM_LONG_SCB; - /* Read/write on this non-disk devices is also displayworthy, - so flash-up the LED/display. */ - break; - } - break; - case INQUIRY: - IBM_DS(shpnt).ldn_inquiry_access[ldn]++; - scb->command = IM_DEVICE_INQUIRY_CMD; - scb->enable |= IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER; - scb->u1.log_blk_adr = 0; - break; - case TEST_UNIT_READY: - scb->command = IM_OTHER_SCSI_CMD_CMD; - scb->enable |= IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER; - scb->u1.log_blk_adr = 0; - scb->u1.scsi_cmd_length = 6; - memcpy(scb->u2.scsi_command, cmd->cmnd, 6); - last_scsi_type(shpnt)[ldn] = IM_LONG_SCB; - break; - case READ_CAPACITY: - /* the length of system memory buffer must be exactly 8 bytes */ - scb->command = IM_READ_CAPACITY_CMD; - scb->enable |= IM_READ_CONTROL | IM_BYPASS_BUFFER; - if (scb->sys_buf_length > 8) - scb->sys_buf_length = 8; - break; - /* Commands that need read-only-mode (system <- device): */ - case REQUEST_SENSE: - scb->command = IM_REQUEST_SENSE_CMD; - scb->enable |= IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER; - break; - /* Commands that need write-only-mode (system -> device): */ - case MODE_SELECT: - case MODE_SELECT_10: - IBM_DS(shpnt).ldn_modeselect_access[ldn]++; - scb->command = IM_OTHER_SCSI_CMD_CMD; - scb->enable |= IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER; /*Select needs WRITE-enabled */ - scb->u1.scsi_cmd_length = cmd->cmd_len; - memcpy(scb->u2.scsi_command, cmd->cmnd, cmd->cmd_len); - last_scsi_type(shpnt)[ldn] = IM_LONG_SCB; - break; - /* For other commands, read-only is useful. Most other commands are - running without an input-data-block. */ - default: - scb->command = IM_OTHER_SCSI_CMD_CMD; - scb->enable |= IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER; - scb->u1.scsi_cmd_length = cmd->cmd_len; - memcpy(scb->u2.scsi_command, cmd->cmnd, cmd->cmd_len); - last_scsi_type(shpnt)[ldn] = IM_LONG_SCB; - break; - } - /*issue scb command, and return */ - if (++disk_rw_in_progress == 1) - PS2_DISK_LED_ON(shpnt->host_no, target); - - if (last_scsi_type(shpnt)[ldn] == IM_LONG_SCB) { - issue_cmd(shpnt, isa_virt_to_bus(scb), IM_LONG_SCB | ldn); - IBM_DS(shpnt).long_scbs++; - } else { - issue_cmd(shpnt, isa_virt_to_bus(scb), IM_SCB | ldn); - IBM_DS(shpnt).scbs++; - } - return 0; -} - -static DEF_SCSI_QCMD(ibmmca_queuecommand) - -static int __ibmmca_abort(Scsi_Cmnd * cmd) -{ - /* Abort does not work, as the adapter never generates an interrupt on - * whatever situation is simulated, even when really pending commands - * are running on the adapters' hardware ! */ - - struct Scsi_Host *shpnt; - unsigned int ldn; - void (*saved_done) (Scsi_Cmnd *); - int target; - int max_pun; - unsigned long imm_command; - -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: Abort subroutine called...\n"); -#endif - - shpnt = cmd->device->host; - - max_pun = subsystem_maxid(shpnt); - if (ibm_ansi_order) { - target = max_pun - 1 - cmd->device->id; - if ((target <= subsystem_pun(shpnt)) && (cmd->device->id <= subsystem_pun(shpnt))) - target--; - else if ((target >= subsystem_pun(shpnt)) && (cmd->device->id >= subsystem_pun(shpnt))) - target++; - } else - target = cmd->device->id; - - /* get logical device number, and disable system interrupts */ - printk(KERN_WARNING "IBM MCA SCSI: Sending abort to device pun=%d, lun=%d.\n", target, cmd->device->lun); - ldn = get_ldn(shpnt)[target][cmd->device->lun]; - - /*if cmd for this ldn has already finished, no need to abort */ - if (!ld(shpnt)[ldn].cmd) { - return SUCCESS; - } - - /* Clear ld.cmd, save done function, install internal done, - * send abort immediate command (this enables sys. interrupts), - * and wait until the interrupt arrives. - */ - saved_done = cmd->scsi_done; - cmd->scsi_done = internal_done; - cmd->SCp.Status = 0; - last_scsi_command(shpnt)[ldn] = IM_ABORT_IMM_CMD; - last_scsi_type(shpnt)[ldn] = IM_IMM_CMD; - imm_command = inl(IM_CMD_REG(shpnt)); - imm_command &= (unsigned long) (0xffff0000); /* mask reserved stuff */ - imm_command |= (unsigned long) (IM_ABORT_IMM_CMD); - /* must wait for attention reg not busy */ - /* FIXME - timeout, politeness */ - while (1) { - if (!(inb(IM_STAT_REG(shpnt)) & IM_BUSY)) - break; - } - /* write registers and enable system interrupts */ - outl(imm_command, IM_CMD_REG(shpnt)); - outb(IM_IMM_CMD | ldn, IM_ATTN_REG(shpnt)); -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: Abort queued to adapter...\n"); -#endif - spin_unlock_irq(shpnt->host_lock); - while (!cmd->SCp.Status) - yield(); - spin_lock_irq(shpnt->host_lock); - cmd->scsi_done = saved_done; -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: Abort returned with adapter response...\n"); -#endif - - /*if abort went well, call saved done, then return success or error */ - if (cmd->result == (DID_ABORT << 16)) - { - cmd->result |= DID_ABORT << 16; - if (cmd->scsi_done) - (cmd->scsi_done) (cmd); - ld(shpnt)[ldn].cmd = NULL; -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: Abort finished with success.\n"); -#endif - return SUCCESS; - } else { - cmd->result |= DID_NO_CONNECT << 16; - if (cmd->scsi_done) - (cmd->scsi_done) (cmd); - ld(shpnt)[ldn].cmd = NULL; -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: Abort failed.\n"); -#endif - return FAILED; - } -} - -static int ibmmca_abort(Scsi_Cmnd * cmd) -{ - struct Scsi_Host *shpnt = cmd->device->host; - int rc; - - spin_lock_irq(shpnt->host_lock); - rc = __ibmmca_abort(cmd); - spin_unlock_irq(shpnt->host_lock); - - return rc; -} - -static int __ibmmca_host_reset(Scsi_Cmnd * cmd) -{ - struct Scsi_Host *shpnt; - Scsi_Cmnd *cmd_aid; - int ticks, i; - unsigned long imm_command; - - BUG_ON(cmd == NULL); - - ticks = IM_RESET_DELAY * HZ; - shpnt = cmd->device->host; - - if (local_checking_phase_flag(shpnt)) { - printk(KERN_WARNING "IBM MCA SCSI: unable to reset while checking devices.\n"); - return FAILED; - } - - /* issue reset immediate command to subsystem, and wait for interrupt */ - printk("IBM MCA SCSI: resetting all devices.\n"); - reset_status(shpnt) = IM_RESET_IN_PROGRESS; - last_scsi_command(shpnt)[0xf] = IM_RESET_IMM_CMD; - last_scsi_type(shpnt)[0xf] = IM_IMM_CMD; - imm_command = inl(IM_CMD_REG(shpnt)); - imm_command &= (unsigned long) (0xffff0000); /* mask reserved stuff */ - imm_command |= (unsigned long) (IM_RESET_IMM_CMD); - /* must wait for attention reg not busy */ - while (1) { - if (!(inb(IM_STAT_REG(shpnt)) & IM_BUSY)) - break; - spin_unlock_irq(shpnt->host_lock); - yield(); - spin_lock_irq(shpnt->host_lock); - } - /*write registers and enable system interrupts */ - outl(imm_command, IM_CMD_REG(shpnt)); - outb(IM_IMM_CMD | 0xf, IM_ATTN_REG(shpnt)); - /* wait for interrupt finished or intr_stat register to be set, as the - * interrupt will not be executed, while we are in here! */ - - /* FIXME: This is really really icky we so want a sleeping version of this ! */ - while (reset_status(shpnt) == IM_RESET_IN_PROGRESS && --ticks && ((inb(IM_INTR_REG(shpnt)) & 0x8f) != 0x8f)) { - udelay((1 + 999 / HZ) * 1000); - barrier(); - } - /* if reset did not complete, just return an error */ - if (!ticks) { - printk(KERN_ERR "IBM MCA SCSI: reset did not complete within %d seconds.\n", IM_RESET_DELAY); - reset_status(shpnt) = IM_RESET_FINISHED_FAIL; - return FAILED; - } - - if ((inb(IM_INTR_REG(shpnt)) & 0x8f) == 0x8f) { - /* analysis done by this routine and not by the intr-routine */ - if (inb(IM_INTR_REG(shpnt)) == 0xaf) - reset_status(shpnt) = IM_RESET_FINISHED_OK_NO_INT; - else if (inb(IM_INTR_REG(shpnt)) == 0xcf) - reset_status(shpnt) = IM_RESET_FINISHED_FAIL; - else /* failed, 4get it */ - reset_status(shpnt) = IM_RESET_NOT_IN_PROGRESS_NO_INT; - outb(IM_EOI | 0xf, IM_ATTN_REG(shpnt)); - } - - /* if reset failed, just return an error */ - if (reset_status(shpnt) == IM_RESET_FINISHED_FAIL) { - printk(KERN_ERR "IBM MCA SCSI: reset failed.\n"); - return FAILED; - } - - /* so reset finished ok - call outstanding done's, and return success */ - printk(KERN_INFO "IBM MCA SCSI: Reset successfully completed.\n"); - for (i = 0; i < MAX_LOG_DEV; i++) { - cmd_aid = ld(shpnt)[i].cmd; - if (cmd_aid && cmd_aid->scsi_done) { - ld(shpnt)[i].cmd = NULL; - cmd_aid->result = DID_RESET << 16; - } - } - return SUCCESS; -} - -static int ibmmca_host_reset(Scsi_Cmnd * cmd) -{ - struct Scsi_Host *shpnt = cmd->device->host; - int rc; - - spin_lock_irq(shpnt->host_lock); - rc = __ibmmca_host_reset(cmd); - spin_unlock_irq(shpnt->host_lock); - - return rc; -} - -static int ibmmca_biosparam(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int *info) -{ - int size = capacity; - info[0] = 64; - info[1] = 32; - info[2] = size / (info[0] * info[1]); - if (info[2] >= 1024) { - info[0] = 128; - info[1] = 63; - info[2] = size / (info[0] * info[1]); - if (info[2] >= 1024) { - info[0] = 255; - info[1] = 63; - info[2] = size / (info[0] * info[1]); - if (info[2] >= 1024) - info[2] = 1023; - } - } - return 0; -} - -/* calculate percentage of total accesses on a ldn */ -static int ldn_access_load(struct Scsi_Host *shpnt, int ldn) -{ - if (IBM_DS(shpnt).total_accesses == 0) - return (0); - if (IBM_DS(shpnt).ldn_access[ldn] == 0) - return (0); - return (IBM_DS(shpnt).ldn_access[ldn] * 100) / IBM_DS(shpnt).total_accesses; -} - -/* calculate total amount of r/w-accesses */ -static int ldn_access_total_read_write(struct Scsi_Host *shpnt) -{ - int a; - int i; - - a = 0; - for (i = 0; i <= MAX_LOG_DEV; i++) - a += IBM_DS(shpnt).ldn_read_access[i] + IBM_DS(shpnt).ldn_write_access[i]; - return (a); -} - -static int ldn_access_total_inquiry(struct Scsi_Host *shpnt) -{ - int a; - int i; - - a = 0; - for (i = 0; i <= MAX_LOG_DEV; i++) - a += IBM_DS(shpnt).ldn_inquiry_access[i]; - return (a); -} - -static int ldn_access_total_modeselect(struct Scsi_Host *shpnt) -{ - int a; - int i; - - a = 0; - for (i = 0; i <= MAX_LOG_DEV; i++) - a += IBM_DS(shpnt).ldn_modeselect_access[i]; - return (a); -} - -/* routine to display info in the proc-fs-structure (a deluxe feature) */ -static int ibmmca_proc_info(struct Scsi_Host *shpnt, char *buffer, char **start, off_t offset, int length, int inout) -{ - int len = 0; - int i, id, lun; - unsigned long flags; - int max_pun; - - - spin_lock_irqsave(shpnt->host_lock, flags); /* Check it */ - - max_pun = subsystem_maxid(shpnt); - - len += sprintf(buffer + len, "\n IBM-SCSI-Subsystem-Linux-Driver, Version %s\n\n\n", IBMMCA_SCSI_DRIVER_VERSION); - len += sprintf(buffer + len, " SCSI Access-Statistics:\n"); - len += sprintf(buffer + len, " Device Scanning Order....: %s\n", (ibm_ansi_order) ? "IBM/ANSI" : "New Industry Standard"); -#ifdef CONFIG_SCSI_MULTI_LUN - len += sprintf(buffer + len, " Multiple LUN probing.....: Yes\n"); -#else - len += sprintf(buffer + len, " Multiple LUN probing.....: No\n"); -#endif - len += sprintf(buffer + len, " This Hostnumber..........: %d\n", shpnt->host_no); - len += sprintf(buffer + len, " Base I/O-Port............: 0x%x\n", (unsigned int) (IM_CMD_REG(shpnt))); - len += sprintf(buffer + len, " (Shared) IRQ.............: %d\n", IM_IRQ); - len += sprintf(buffer + len, " Total Interrupts.........: %d\n", IBM_DS(shpnt).total_interrupts); - len += sprintf(buffer + len, " Total SCSI Accesses......: %d\n", IBM_DS(shpnt).total_accesses); - len += sprintf(buffer + len, " Total short SCBs.........: %d\n", IBM_DS(shpnt).scbs); - len += sprintf(buffer + len, " Total long SCBs..........: %d\n", IBM_DS(shpnt).long_scbs); - len += sprintf(buffer + len, " Total SCSI READ/WRITE..: %d\n", ldn_access_total_read_write(shpnt)); - len += sprintf(buffer + len, " Total SCSI Inquiries...: %d\n", ldn_access_total_inquiry(shpnt)); - len += sprintf(buffer + len, " Total SCSI Modeselects.: %d\n", ldn_access_total_modeselect(shpnt)); - len += sprintf(buffer + len, " Total SCSI other cmds..: %d\n", IBM_DS(shpnt).total_accesses - ldn_access_total_read_write(shpnt) - - ldn_access_total_modeselect(shpnt) - - ldn_access_total_inquiry(shpnt)); - len += sprintf(buffer + len, " Total SCSI command fails.: %d\n\n", IBM_DS(shpnt).total_errors); - len += sprintf(buffer + len, " Logical-Device-Number (LDN) Access-Statistics:\n"); - len += sprintf(buffer + len, " LDN | Accesses [%%] | READ | WRITE | ASSIGNMENTS\n"); - len += sprintf(buffer + len, " -----|--------------|-----------|-----------|--------------\n"); - for (i = 0; i <= MAX_LOG_DEV; i++) - len += sprintf(buffer + len, " %2X | %3d | %8d | %8d | %8d\n", i, ldn_access_load(shpnt, i), IBM_DS(shpnt).ldn_read_access[i], IBM_DS(shpnt).ldn_write_access[i], IBM_DS(shpnt).ldn_assignments[i]); - len += sprintf(buffer + len, " -----------------------------------------------------------\n\n"); - len += sprintf(buffer + len, " Dynamical-LDN-Assignment-Statistics:\n"); - len += sprintf(buffer + len, " Number of physical SCSI-devices..: %d (+ Adapter)\n", IBM_DS(shpnt).total_scsi_devices); - len += sprintf(buffer + len, " Dynamical Assignment necessary...: %s\n", IBM_DS(shpnt).dyn_flag ? "Yes" : "No "); - len += sprintf(buffer + len, " Next LDN to be assigned..........: 0x%x\n", next_ldn(shpnt)); - len += sprintf(buffer + len, " Dynamical assignments done yet...: %d\n", IBM_DS(shpnt).dynamical_assignments); - len += sprintf(buffer + len, "\n Current SCSI-Device-Mapping:\n"); - len += sprintf(buffer + len, " Physical SCSI-Device Map Logical SCSI-Device Map\n"); - len += sprintf(buffer + len, " ID\\LUN 0 1 2 3 4 5 6 7 ID\\LUN 0 1 2 3 4 5 6 7\n"); - for (id = 0; id < max_pun; id++) { - len += sprintf(buffer + len, " %2d ", id); - for (lun = 0; lun < 8; lun++) - len += sprintf(buffer + len, "%2s ", ti_p(get_scsi(shpnt)[id][lun])); - len += sprintf(buffer + len, " %2d ", id); - for (lun = 0; lun < 8; lun++) - len += sprintf(buffer + len, "%2s ", ti_l(get_ldn(shpnt)[id][lun])); - len += sprintf(buffer + len, "\n"); - } - - len += sprintf(buffer + len, "(A = IBM-Subsystem, D = Harddisk, T = Tapedrive, P = Processor, W = WORM,\n"); - len += sprintf(buffer + len, " R = CD-ROM, S = Scanner, M = MO-Drive, C = Medium-Changer, + = unprovided LUN,\n"); - len += sprintf(buffer + len, " - = nothing found, nothing assigned or unprobed LUN)\n\n"); - - *start = buffer + offset; - len -= offset; - if (len > length) - len = length; - spin_unlock_irqrestore(shpnt->host_lock, flags); - return len; -} - -static int option_setup(char *str) -{ - int ints[IM_MAX_HOSTS]; - char *cur = str; - int i = 1; - - while (cur && isdigit(*cur) && i < IM_MAX_HOSTS) { - ints[i++] = simple_strtoul(cur, NULL, 0); - if ((cur = strchr(cur, ',')) != NULL) - cur++; - } - ints[0] = i - 1; - internal_ibmmca_scsi_setup(cur, ints); - return 1; -} - -__setup("ibmmcascsi=", option_setup); - -static struct mca_driver ibmmca_driver = { - .id_table = ibmmca_id_table, - .driver = { - .name = "ibmmca", - .bus = &mca_bus_type, - .probe = ibmmca_probe, - .remove = __devexit_p(ibmmca_remove), - }, -}; - -static int __init ibmmca_init(void) -{ -#ifdef MODULE - /* If the driver is run as module, read from conf.modules or cmd-line */ - if (boot_options) - option_setup(boot_options); -#endif - - return mca_register_driver_integrated(&ibmmca_driver, MCA_INTEGSCSI); -} - -static void __exit ibmmca_exit(void) -{ - mca_unregister_driver(&ibmmca_driver); -} - -module_init(ibmmca_init); -module_exit(ibmmca_exit); diff --git a/drivers/scsi/sim710.c b/drivers/scsi/sim710.c index 8ac6ce792b69..a318264a4ba1 100644 --- a/drivers/scsi/sim710.c +++ b/drivers/scsi/sim710.c @@ -17,7 +17,7 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *---------------------------------------------------------------------------- * - * MCA card detection code by Trent McNair. + * MCA card detection code by Trent McNair. (now deleted) * Fixes to not explicitly nul bss data from Xavier Bestel. * Some multiboard fixes from Rolf Eike Beer. * Auto probing of EISA config space from Trevor Hemsley. @@ -32,7 +32,6 @@ #include <linux/blkdev.h> #include <linux/device.h> #include <linux/init.h> -#include <linux/mca.h> #include <linux/eisa.h> #include <linux/interrupt.h> #include <scsi/scsi_host.h> @@ -43,7 +42,7 @@ #include "53c700.h" -/* Must be enough for both EISA and MCA */ +/* Must be enough for EISA */ #define MAX_SLOTS 8 static __u8 __initdata id_array[MAX_SLOTS] = { [0 ... MAX_SLOTS-1] = 7 }; @@ -89,7 +88,7 @@ param_setup(char *str) __setup("sim710=", param_setup); static struct scsi_host_template sim710_driver_template = { - .name = "LSI (Symbios) 710 MCA/EISA", + .name = "LSI (Symbios) 710 EISA", .proc_name = "sim710", .this_id = 7, .module = THIS_MODULE, @@ -169,114 +168,6 @@ sim710_device_remove(struct device *dev) return 0; } -#ifdef CONFIG_MCA - -/* CARD ID 01BB and 01BA use the same pos values */ -#define MCA_01BB_IO_PORTS { 0x0000, 0x0000, 0x0800, 0x0C00, 0x1000, 0x1400, \ - 0x1800, 0x1C00, 0x2000, 0x2400, 0x2800, \ - 0x2C00, 0x3000, 0x3400, 0x3800, 0x3C00, \ - 0x4000, 0x4400, 0x4800, 0x4C00, 0x5000 } - -#define MCA_01BB_IRQS { 3, 5, 11, 14 } - -/* CARD ID 004f */ -#define MCA_004F_IO_PORTS { 0x0000, 0x0200, 0x0300, 0x0400, 0x0500, 0x0600 } -#define MCA_004F_IRQS { 5, 9, 14 } - -static short sim710_mca_id_table[] = { 0x01bb, 0x01ba, 0x004f, 0}; - -static __init int -sim710_mca_probe(struct device *dev) -{ - struct mca_device *mca_dev = to_mca_device(dev); - int slot = mca_dev->slot; - int pos[3]; - unsigned int base; - int irq_vector; - short id = sim710_mca_id_table[mca_dev->index]; - static int io_004f_by_pos[] = MCA_004F_IO_PORTS; - static int irq_004f_by_pos[] = MCA_004F_IRQS; - static int io_01bb_by_pos[] = MCA_01BB_IO_PORTS; - static int irq_01bb_by_pos[] = MCA_01BB_IRQS; - char *name; - int clock; - - pos[0] = mca_device_read_stored_pos(mca_dev, 2); - pos[1] = mca_device_read_stored_pos(mca_dev, 3); - pos[2] = mca_device_read_stored_pos(mca_dev, 4); - - /* - * 01BB & 01BA port base by bits 7,6,5,4,3,2 in pos[2] - * - * 000000 <disabled> 001010 0x2800 - * 000001 <invalid> 001011 0x2C00 - * 000010 0x0800 001100 0x3000 - * 000011 0x0C00 001101 0x3400 - * 000100 0x1000 001110 0x3800 - * 000101 0x1400 001111 0x3C00 - * 000110 0x1800 010000 0x4000 - * 000111 0x1C00 010001 0x4400 - * 001000 0x2000 010010 0x4800 - * 001001 0x2400 010011 0x4C00 - * 010100 0x5000 - * - * 00F4 port base by bits 3,2,1 in pos[0] - * - * 000 <disabled> 001 0x200 - * 010 0x300 011 0x400 - * 100 0x500 101 0x600 - * - * 01BB & 01BA IRQ is specified in pos[0] bits 7 and 6: - * - * 00 3 10 11 - * 01 5 11 14 - * - * 00F4 IRQ specified by bits 6,5,4 in pos[0] - * - * 100 5 101 9 - * 110 14 - */ - - if (id == 0x01bb || id == 0x01ba) { - base = io_01bb_by_pos[(pos[2] & 0xFC) >> 2]; - irq_vector = - irq_01bb_by_pos[((pos[0] & 0xC0) >> 6)]; - - clock = 50; - if (id == 0x01bb) - name = "NCR 3360/3430 SCSI SubSystem"; - else - name = "NCR Dual SIOP SCSI Host Adapter Board"; - } else if ( id == 0x004f ) { - base = io_004f_by_pos[((pos[0] & 0x0E) >> 1)]; - irq_vector = - irq_004f_by_pos[((pos[0] & 0x70) >> 4) - 4]; - clock = 50; - name = "NCR 53c710 SCSI Host Adapter Board"; - } else { - return -ENODEV; - } - mca_device_set_name(mca_dev, name); - mca_device_set_claim(mca_dev, 1); - base = mca_device_transform_ioport(mca_dev, base); - irq_vector = mca_device_transform_irq(mca_dev, irq_vector); - - return sim710_probe_common(dev, base, irq_vector, clock, - 0, id_array[slot]); -} - -static struct mca_driver sim710_mca_driver = { - .id_table = sim710_mca_id_table, - .driver = { - .name = "sim710", - .bus = &mca_bus_type, - .probe = sim710_mca_probe, - .remove = __devexit_p(sim710_device_remove), - }, -}; - -#endif /* CONFIG_MCA */ - #ifdef CONFIG_EISA static struct eisa_device_id sim710_eisa_ids[] = { { "CPQ4410" }, @@ -344,10 +235,6 @@ static int __init sim710_init(void) param_setup(sim710); #endif -#ifdef CONFIG_MCA - err = mca_register_driver(&sim710_mca_driver); -#endif - #ifdef CONFIG_EISA err = eisa_driver_register(&sim710_eisa_driver); #endif @@ -361,11 +248,6 @@ static int __init sim710_init(void) static void __exit sim710_exit(void) { -#ifdef CONFIG_MCA - if (MCA_bus) - mca_unregister_driver(&sim710_mca_driver); -#endif - #ifdef CONFIG_EISA eisa_driver_unregister(&sim710_eisa_driver); #endif |