summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/kernel-parameters.txt5
-rw-r--r--arch/arm/Kconfig88
-rw-r--r--arch/arm/Makefile8
-rw-r--r--arch/arm/boot/compressed/head.S4
-rw-r--r--arch/arm/common/Makefile1
-rw-r--r--arch/arm/common/rtctime.c434
-rw-r--r--arch/arm/common/sharpsl_pm.c3
-rw-r--r--arch/arm/configs/at91cap9adk_defconfig82
-rw-r--r--arch/arm/configs/at91rm9200dk_defconfig1
-rw-r--r--arch/arm/configs/at91rm9200ek_defconfig1
-rw-r--r--arch/arm/configs/at91sam9260ek_defconfig1
-rw-r--r--arch/arm/configs/at91sam9261ek_defconfig1
-rw-r--r--arch/arm/configs/at91sam9263ek_defconfig1
-rw-r--r--arch/arm/configs/at91sam9g20ek_defconfig (renamed from arch/arm/configs/em_x270_defconfig)647
-rw-r--r--arch/arm/configs/at91sam9rlek_defconfig1
-rw-r--r--arch/arm/configs/ateb9200_defconfig1
-rw-r--r--arch/arm/configs/collie_defconfig1
-rw-r--r--arch/arm/configs/corgi_defconfig1
-rw-r--r--arch/arm/configs/ecbat91_defconfig1
-rw-r--r--arch/arm/configs/ep93xx_defconfig1
-rw-r--r--arch/arm/configs/eseries_pxa_defconfig1
-rw-r--r--arch/arm/configs/imx27ads_defconfig826
-rw-r--r--arch/arm/configs/iop13xx_defconfig1
-rw-r--r--arch/arm/configs/iop32x_defconfig1
-rw-r--r--arch/arm/configs/iop33x_defconfig1
-rw-r--r--arch/arm/configs/ixp2000_defconfig1
-rw-r--r--arch/arm/configs/ixp23xx_defconfig1
-rw-r--r--arch/arm/configs/ixp4xx_defconfig9
-rw-r--r--arch/arm/configs/kafa_defconfig1
-rw-r--r--arch/arm/configs/kb9202_defconfig1
-rw-r--r--arch/arm/configs/kirkwood_defconfig1426
-rw-r--r--arch/arm/configs/ks8695_defconfig1
-rw-r--r--arch/arm/configs/loki_defconfig1147
-rw-r--r--arch/arm/configs/lpd270_defconfig1
-rw-r--r--arch/arm/configs/lpd7a404_defconfig1
-rw-r--r--arch/arm/configs/mv78xx0_defconfig1445
-rw-r--r--arch/arm/configs/mx31ads_defconfig839
-rw-r--r--arch/arm/configs/mx31litekit_defconfig1100
-rw-r--r--arch/arm/configs/netx_defconfig1
-rw-r--r--arch/arm/configs/onearm_defconfig1
-rw-r--r--arch/arm/configs/orion5x_defconfig319
-rw-r--r--arch/arm/configs/pcm037_defconfig748
-rw-r--r--arch/arm/configs/pcm038_defconfig1008
-rw-r--r--arch/arm/configs/picotux200_defconfig1
-rw-r--r--arch/arm/configs/pnx4008_defconfig1
-rw-r--r--arch/arm/configs/qil-a9260_defconfig1256
-rw-r--r--arch/arm/configs/realview-smp_defconfig1
-rw-r--r--arch/arm/configs/realview_defconfig1
-rw-r--r--arch/arm/configs/rpc_defconfig1
-rw-r--r--arch/arm/configs/s3c2410_defconfig1043
-rw-r--r--arch/arm/configs/sam9_l9260_defconfig1
-rw-r--r--arch/arm/configs/spitz_defconfig1
-rw-r--r--arch/arm/configs/tct_hammer_defconfig1
-rw-r--r--arch/arm/configs/trizeps4_defconfig1
-rw-r--r--arch/arm/configs/usb-a9260_defconfig1142
-rw-r--r--arch/arm/configs/usb-a9263_defconfig1134
-rw-r--r--arch/arm/configs/versatile_defconfig1
-rw-r--r--arch/arm/configs/xm_x270_defconfig (renamed from arch/arm/configs/cm_x270_defconfig)861
-rw-r--r--arch/arm/kernel/atags.c83
-rw-r--r--arch/arm/kernel/ecard.c13
-rw-r--r--arch/arm/kernel/ecard.h13
-rw-r--r--arch/arm/kernel/process.c4
-rw-r--r--arch/arm/kernel/stacktrace.c34
-rw-r--r--arch/arm/kernel/time.c120
-rw-r--r--arch/arm/lib/copy_template.S12
-rw-r--r--arch/arm/lib/memmove.S14
-rw-r--r--arch/arm/lib/memset.S46
-rw-r--r--arch/arm/lib/memzero.S44
-rw-r--r--arch/arm/mach-at91/Kconfig56
-rw-r--r--arch/arm/mach-at91/Makefile8
-rw-r--r--arch/arm/mach-at91/at91cap9_devices.c99
-rw-r--r--arch/arm/mach-at91/at91sam9260.c16
-rw-r--r--arch/arm/mach-at91/at91sam9260_devices.c44
-rw-r--r--arch/arm/mach-at91/at91sam9261_devices.c12
-rw-r--r--arch/arm/mach-at91/at91sam9263_devices.c4
-rw-r--r--arch/arm/mach-at91/at91sam9rl_devices.c107
-rw-r--r--arch/arm/mach-at91/board-cap9adk.c9
-rw-r--r--arch/arm/mach-at91/board-carmeva.c23
-rw-r--r--arch/arm/mach-at91/board-csb637.c4
-rw-r--r--arch/arm/mach-at91/board-dk.c25
-rw-r--r--arch/arm/mach-at91/board-eb9200.c26
-rw-r--r--arch/arm/mach-at91/board-ek.c25
-rw-r--r--arch/arm/mach-at91/board-kb9202.c29
-rw-r--r--arch/arm/mach-at91/board-qil-a9260.c255
-rw-r--r--arch/arm/mach-at91/board-sam9g20ek.c218
-rw-r--r--arch/arm/mach-at91/board-sam9rlek.c10
-rw-r--r--arch/arm/mach-at91/board-usb-a9260.c215
-rw-r--r--arch/arm/mach-at91/board-usb-a9263.c230
-rwxr-xr-xarch/arm/mach-at91/board-yl-9200.c853
-rw-r--r--arch/arm/mach-at91/clock.c64
-rw-r--r--arch/arm/mach-at91/pm.c2
-rw-r--r--arch/arm/mach-ep93xx/clock.c5
-rw-r--r--arch/arm/mach-footbridge/Makefile2
-rw-r--r--arch/arm/mach-footbridge/co285.c39
-rw-r--r--arch/arm/mach-footbridge/common.c21
-rw-r--r--arch/arm/mach-footbridge/ebsa285-leds.c2
-rw-r--r--arch/arm/mach-footbridge/time.c3
-rw-r--r--arch/arm/mach-imx/Makefile2
-rw-r--r--arch/arm/mach-imx/clock.c205
-rw-r--r--arch/arm/mach-imx/cpufreq.c20
-rw-r--r--arch/arm/mach-imx/dma.c13
-rw-r--r--arch/arm/mach-imx/generic.c76
-rw-r--r--arch/arm/mach-imx/mx1ads.c10
-rw-r--r--arch/arm/mach-imx/time.c23
-rw-r--r--arch/arm/mach-integrator/Makefile2
-rw-r--r--arch/arm/mach-integrator/time.c223
-rw-r--r--arch/arm/mach-ixp4xx/Kconfig9
-rw-r--r--arch/arm/mach-ixp4xx/Makefile2
-rw-r--r--arch/arm/mach-ixp4xx/common.c4
-rw-r--r--arch/arm/mach-ixp4xx/fsg-pci.c71
-rw-r--r--arch/arm/mach-ixp4xx/fsg-setup.c276
-rw-r--r--arch/arm/mach-kirkwood/Kconfig25
-rw-r--r--arch/arm/mach-kirkwood/Makefile5
-rw-r--r--arch/arm/mach-kirkwood/Makefile.boot3
-rw-r--r--arch/arm/mach-kirkwood/addr-map.c139
-rw-r--r--arch/arm/mach-kirkwood/common.c331
-rw-r--r--arch/arm/mach-kirkwood/common.h42
-rw-r--r--arch/arm/mach-kirkwood/db88f6281-bp-setup.c68
-rw-r--r--arch/arm/mach-kirkwood/irq.c22
-rw-r--r--arch/arm/mach-kirkwood/pcie.c180
-rw-r--r--arch/arm/mach-kirkwood/rd88f6192-nas-setup.c69
-rw-r--r--arch/arm/mach-kirkwood/rd88f6281-setup.c113
-rw-r--r--arch/arm/mach-loki/Kconfig13
-rw-r--r--arch/arm/mach-loki/Makefile3
-rw-r--r--arch/arm/mach-loki/Makefile.boot3
-rw-r--r--arch/arm/mach-loki/addr-map.c121
-rw-r--r--arch/arm/mach-loki/common.c305
-rw-r--r--arch/arm/mach-loki/common.h36
-rw-r--r--arch/arm/mach-loki/irq.c21
-rw-r--r--arch/arm/mach-loki/lb88rc8480-setup.c100
-rw-r--r--arch/arm/mach-mv78xx0/Kconfig13
-rw-r--r--arch/arm/mach-mv78xx0/Makefile2
-rw-r--r--arch/arm/mach-mv78xx0/Makefile.boot3
-rw-r--r--arch/arm/mach-mv78xx0/addr-map.c156
-rw-r--r--arch/arm/mach-mv78xx0/common.c754
-rw-r--r--arch/arm/mach-mv78xx0/common.h49
-rw-r--r--arch/arm/mach-mv78xx0/db78x00-bp-setup.c94
-rw-r--r--arch/arm/mach-mv78xx0/irq.c22
-rw-r--r--arch/arm/mach-mv78xx0/pcie.c312
-rw-r--r--arch/arm/mach-mx2/Kconfig39
-rw-r--r--arch/arm/mach-mx2/Makefile14
-rw-r--r--arch/arm/mach-mx2/Makefile.boot3
-rw-r--r--arch/arm/mach-mx2/clock_imx27.c1626
-rw-r--r--arch/arm/mach-mx2/cpu_imx27.c63
-rw-r--r--arch/arm/mach-mx2/crm_regs.h273
-rw-r--r--arch/arm/mach-mx2/devices.c231
-rw-r--r--arch/arm/mach-mx2/generic.c74
-rw-r--r--arch/arm/mach-mx2/mx27ads.c304
-rw-r--r--arch/arm/mach-mx2/pcm038.c204
-rw-r--r--arch/arm/mach-mx2/pcm970-baseboard.c32
-rw-r--r--arch/arm/mach-mx2/serial.c177
-rw-r--r--arch/arm/mach-mx2/system.c63
-rw-r--r--arch/arm/mach-mx3/Kconfig13
-rw-r--r--arch/arm/mach-mx3/Makefile4
-rw-r--r--arch/arm/mach-mx3/clock.c1147
-rw-r--r--arch/arm/mach-mx3/crm_regs.h401
-rw-r--r--arch/arm/mach-mx3/devices.c180
-rw-r--r--arch/arm/mach-mx3/iomux.c111
-rw-r--r--arch/arm/mach-mx3/mx31ads.c14
-rw-r--r--arch/arm/mach-mx3/mx31lite.c107
-rw-r--r--arch/arm/mach-mx3/pcm037.c130
-rw-r--r--arch/arm/mach-mx3/time.c148
-rw-r--r--arch/arm/mach-omap1/Makefile4
-rw-r--r--arch/arm/mach-omap1/board-nokia770.c17
-rw-r--r--arch/arm/mach-omap1/board-osk.c18
-rw-r--r--arch/arm/mach-omap1/fpga.c10
-rw-r--r--arch/arm/mach-omap1/mcbsp.c280
-rw-r--r--arch/arm/mach-omap1/pm.c7
-rw-r--r--arch/arm/mach-omap1/sram.S (renamed from arch/arm/plat-omap/sram-fn.S)6
-rw-r--r--arch/arm/mach-omap2/Makefile8
-rw-r--r--arch/arm/mach-omap2/clock.c201
-rw-r--r--arch/arm/mach-omap2/clock.h6
-rw-r--r--arch/arm/mach-omap2/clock24xx.c12
-rw-r--r--arch/arm/mach-omap2/clock24xx.h47
-rw-r--r--arch/arm/mach-omap2/clock34xx.c299
-rw-r--r--arch/arm/mach-omap2/clock34xx.h147
-rw-r--r--arch/arm/mach-omap2/cm-regbits-34xx.h18
-rw-r--r--arch/arm/mach-omap2/cm.h15
-rw-r--r--arch/arm/mach-omap2/control.c24
-rw-r--r--arch/arm/mach-omap2/id.c195
-rw-r--r--arch/arm/mach-omap2/mcbsp.c208
-rw-r--r--arch/arm/mach-omap2/memory.c11
-rw-r--r--arch/arm/mach-omap2/mux.c2
-rw-r--r--arch/arm/mach-omap2/pm.c7
-rw-r--r--arch/arm/mach-omap2/prcm-common.h1
-rw-r--r--arch/arm/mach-omap2/prcm.c98
-rw-r--r--arch/arm/mach-omap2/prm.h30
-rw-r--r--arch/arm/mach-omap2/sdrc.h10
-rw-r--r--arch/arm/mach-omap2/sram242x.S (renamed from arch/arm/mach-omap2/sram-fn.S)105
-rw-r--r--arch/arm/mach-omap2/sram243x.S321
-rw-r--r--arch/arm/mach-omap2/timer-gp.c9
-rw-r--r--arch/arm/mach-orion5x/Kconfig48
-rw-r--r--arch/arm/mach-orion5x/Makefile12
-rw-r--r--arch/arm/mach-orion5x/addr-map.c45
-rw-r--r--arch/arm/mach-orion5x/common.c307
-rw-r--r--arch/arm/mach-orion5x/common.h38
-rw-r--r--arch/arm/mach-orion5x/db88f5281-setup.c82
-rw-r--r--arch/arm/mach-orion5x/dns323-setup.c125
-rw-r--r--arch/arm/mach-orion5x/gpio.c47
-rw-r--r--arch/arm/mach-orion5x/irq.c18
-rw-r--r--arch/arm/mach-orion5x/kurobox_pro-setup.c224
-rw-r--r--arch/arm/mach-orion5x/mpp.c163
-rw-r--r--arch/arm/mach-orion5x/mpp.h74
-rw-r--r--arch/arm/mach-orion5x/mss2-setup.c270
-rw-r--r--arch/arm/mach-orion5x/mv2120-setup.c239
-rw-r--r--arch/arm/mach-orion5x/pci.c86
-rw-r--r--arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c161
-rw-r--r--arch/arm/mach-orion5x/rd88f5181l-ge-setup.c172
-rw-r--r--arch/arm/mach-orion5x/rd88f5182-setup.c79
-rw-r--r--arch/arm/mach-orion5x/ts209-setup.c299
-rw-r--r--arch/arm/mach-orion5x/ts409-setup.c273
-rw-r--r--arch/arm/mach-orion5x/ts78xx-setup.c277
-rw-r--r--arch/arm/mach-orion5x/tsx09-common.c133
-rw-r--r--arch/arm/mach-orion5x/tsx09-common.h20
-rw-r--r--arch/arm/mach-orion5x/wnr854t-setup.c164
-rw-r--r--arch/arm/mach-orion5x/wrt350n-v2-setup.c173
-rw-r--r--arch/arm/mach-pxa/Kconfig59
-rw-r--r--arch/arm/mach-pxa/Makefile5
-rw-r--r--arch/arm/mach-pxa/clock.c5
-rw-r--r--arch/arm/mach-pxa/clock.h12
-rw-r--r--arch/arm/mach-pxa/cm-x270-pci.c26
-rw-r--r--arch/arm/mach-pxa/cm-x270.c9
-rw-r--r--arch/arm/mach-pxa/corgi.c1
-rw-r--r--arch/arm/mach-pxa/corgi_pm.c7
-rw-r--r--arch/arm/mach-pxa/devices.c116
-rw-r--r--arch/arm/mach-pxa/devices.h9
-rw-r--r--arch/arm/mach-pxa/em-x270.c10
-rw-r--r--arch/arm/mach-pxa/generic.c17
-rw-r--r--arch/arm/mach-pxa/irq.c1
-rw-r--r--arch/arm/mach-pxa/lpd270.c55
-rw-r--r--arch/arm/mach-pxa/lubbock.c8
-rw-r--r--arch/arm/mach-pxa/magician.c69
-rw-r--r--arch/arm/mach-pxa/mainstone.c71
-rw-r--r--arch/arm/mach-pxa/mfp-pxa2xx.c1
-rw-r--r--arch/arm/mach-pxa/pcm990-baseboard.c131
-rw-r--r--arch/arm/mach-pxa/poodle.c1
-rw-r--r--arch/arm/mach-pxa/pwm.c319
-rw-r--r--arch/arm/mach-pxa/pxa25x.c19
-rw-r--r--arch/arm/mach-pxa/pxa27x.c12
-rw-r--r--arch/arm/mach-pxa/pxa2xx.c46
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c8
-rw-r--r--arch/arm/mach-pxa/spitz_pm.c7
-rw-r--r--arch/arm/mach-pxa/standby.S83
-rw-r--r--arch/arm/mach-pxa/trizeps4.c12
-rw-r--r--arch/arm/mach-pxa/zylonite.c28
-rw-r--r--arch/arm/mach-pxa/zylonite_pxa300.c4
-rw-r--r--arch/arm/mach-pxa/zylonite_pxa320.c2
-rw-r--r--arch/arm/mach-s3c2410/Kconfig21
-rw-r--r--arch/arm/mach-s3c2410/Makefile8
-rw-r--r--arch/arm/mach-s3c2410/bast-ide.c112
-rw-r--r--arch/arm/mach-s3c2410/mach-bast.c59
-rw-r--r--arch/arm/mach-s3c2410/mach-n30.c474
-rw-r--r--arch/arm/mach-s3c2410/mach-vr1000.c72
-rw-r--r--arch/arm/mach-s3c2410/nor-simtec.c86
-rw-r--r--arch/arm/mach-s3c2410/nor-simtec.h14
-rw-r--r--arch/arm/mach-s3c2412/Kconfig10
-rw-r--r--arch/arm/mach-s3c2412/Makefile1
-rw-r--r--arch/arm/mach-s3c2412/clock.c13
-rw-r--r--arch/arm/mach-s3c2412/mach-jive.c687
-rw-r--r--arch/arm/mach-s3c2440/Kconfig6
-rw-r--r--arch/arm/mach-s3c2440/Makefile1
-rw-r--r--arch/arm/mach-s3c2440/mach-anubis.c41
-rw-r--r--arch/arm/mach-s3c2440/mach-at2440evb.c198
-rw-r--r--arch/arm/mach-s3c2440/mach-osiris.c15
-rw-r--r--arch/arm/mach-s3c2443/clock.c91
-rw-r--r--arch/arm/mm/Kconfig34
-rw-r--r--arch/arm/mm/Makefile2
-rw-r--r--arch/arm/mm/cache-feroceon-l2.c318
-rw-r--r--arch/arm/mm/fault-armv.c4
-rw-r--r--arch/arm/mm/flush.c2
-rw-r--r--arch/arm/mm/proc-feroceon.S242
-rw-r--r--arch/arm/plat-iop/gpio.c43
-rw-r--r--arch/arm/plat-mxc/Kconfig8
-rw-r--r--arch/arm/plat-mxc/Makefile4
-rw-r--r--arch/arm/plat-mxc/clock.c331
-rw-r--r--arch/arm/plat-mxc/gpio.c253
-rw-r--r--arch/arm/plat-mxc/iomux-mx1-mx2.c156
-rw-r--r--arch/arm/plat-mxc/irq.c70
-rw-r--r--arch/arm/plat-mxc/time.c228
-rw-r--r--arch/arm/plat-omap/Makefile2
-rw-r--r--arch/arm/plat-omap/clock.c128
-rw-r--r--arch/arm/plat-omap/common.c59
-rw-r--r--arch/arm/plat-omap/devices.c48
-rw-r--r--arch/arm/plat-omap/dma.c764
-rw-r--r--arch/arm/plat-omap/dmtimer.c212
-rw-r--r--arch/arm/plat-omap/mcbsp.c767
-rw-r--r--arch/arm/plat-omap/sram.c211
-rw-r--r--arch/arm/plat-omap/usb.c131
-rw-r--r--arch/arm/plat-orion/irq.c3
-rw-r--r--arch/arm/plat-orion/pcie.c6
-rw-r--r--arch/arm/plat-orion/time.c6
-rw-r--r--arch/arm/plat-s3c24xx/Kconfig8
-rw-r--r--arch/arm/plat-s3c24xx/Makefile3
-rw-r--r--arch/arm/plat-s3c24xx/devs.c100
-rw-r--r--arch/arm/plat-s3c24xx/gpiolib.c259
-rw-r--r--arch/arm/plat-s3c24xx/pwm-clock.c437
-rw-r--r--arch/arm/plat-s3c24xx/pwm.c402
-rw-r--r--arch/arm/tools/mach-types126
-rw-r--r--arch/sh/configs/landisk_defconfig1
-rw-r--r--arch/sh/configs/lboxre2_defconfig1
-rw-r--r--arch/sh/configs/se7705_defconfig1
-rw-r--r--arch/sh/configs/se7712_defconfig1
-rw-r--r--arch/sh/configs/se7750_defconfig1
-rw-r--r--drivers/acorn/char/Makefile5
-rw-r--r--drivers/acorn/char/defkeymap-l7200.c386
-rw-r--r--drivers/i2c/busses/i2c-pxa.c30
-rw-r--r--drivers/i2c/chips/isp1301_omap.c163
-rw-r--r--drivers/mmc/host/imxmmc.c23
-rw-r--r--drivers/mtd/maps/omap_nor.c23
-rw-r--r--drivers/mtd/nand/orion_nand.c3
-rw-r--r--drivers/net/Kconfig2
-rw-r--r--drivers/net/arm/etherh.c2
-rw-r--r--drivers/net/irda/pxaficp_ir.c24
-rw-r--r--drivers/pcmcia/omap_cf.c25
-rw-r--r--drivers/pcmcia/pxa2xx_cm_x270.c15
-rw-r--r--drivers/pcmcia/pxa2xx_mainstone.c13
-rw-r--r--drivers/pcmcia/pxa2xx_sharpsl.c12
-rw-r--r--drivers/rtc/Kconfig19
-rw-r--r--drivers/rtc/Makefile1
-rw-r--r--drivers/rtc/rtc-at91rm9200.c4
-rw-r--r--drivers/rtc/rtc-at91sam9.c1
-rw-r--r--drivers/rtc/rtc-omap.c1
-rw-r--r--drivers/rtc/rtc-pl030.c217
-rw-r--r--drivers/rtc/rtc-pl031.c36
-rw-r--r--drivers/rtc/rtc-s3c.c4
-rw-r--r--drivers/rtc/rtc-sa1100.c37
-rw-r--r--drivers/scsi/arm/Kconfig2
-rw-r--r--drivers/scsi/arm/acornscsi-io.S15
-rw-r--r--drivers/scsi/arm/acornscsi.c426
-rw-r--r--drivers/scsi/arm/acornscsi.h9
-rw-r--r--drivers/serial/Kconfig56
-rw-r--r--drivers/serial/Makefile4
-rw-r--r--drivers/serial/imx.c318
-rw-r--r--drivers/serial/s3c2400.c106
-rw-r--r--drivers/serial/s3c2410.c1860
-rw-r--r--drivers/serial/s3c2412.c151
-rw-r--r--drivers/serial/s3c2440.c181
-rw-r--r--drivers/serial/samsung.c1317
-rw-r--r--drivers/serial/samsung.h102
-rw-r--r--drivers/spi/spi_imx.c54
-rw-r--r--drivers/usb/gadget/Kconfig16
-rw-r--r--drivers/usb/gadget/Makefile2
-rw-r--r--drivers/usb/gadget/at91_udc.c4
-rw-r--r--drivers/usb/gadget/ether.c2
-rw-r--r--drivers/usb/gadget/gadget_chips.h4
-rw-r--r--drivers/usb/gadget/inode.c2
-rw-r--r--drivers/usb/gadget/omap_udc.c510
-rw-r--r--drivers/usb/gadget/omap_udc.h61
-rw-r--r--drivers/usb/gadget/pxa25x_udc.c (renamed from drivers/usb/gadget/pxa2xx_udc.c)309
-rw-r--r--drivers/usb/gadget/pxa25x_udc.h (renamed from drivers/usb/gadget/pxa2xx_udc.h)29
-rw-r--r--drivers/usb/gadget/pxa27x_udc.c9
-rw-r--r--drivers/usb/gadget/pxa27x_udc.h8
-rw-r--r--drivers/usb/host/ohci-omap.c5
-rw-r--r--drivers/usb/host/ohci-pxa27x.c3
-rw-r--r--drivers/video/backlight/Kconfig7
-rw-r--r--drivers/video/backlight/Makefile1
-rw-r--r--drivers/video/backlight/pwm_bl.c185
-rw-r--r--drivers/video/pxafb.c44
-rw-r--r--include/asm-arm/arch-at91/at91_pmc.h7
-rw-r--r--include/asm-arm/arch-at91/at91cap9.h2
-rw-r--r--include/asm-arm/arch-at91/at91cap9_matrix.h5
-rw-r--r--include/asm-arm/arch-at91/at91sam9260.h11
-rw-r--r--include/asm-arm/arch-at91/at91sam9rl.h2
-rw-r--r--include/asm-arm/arch-at91/board.h6
-rw-r--r--include/asm-arm/arch-at91/cpu.h7
-rw-r--r--include/asm-arm/arch-at91/hardware.h2
-rw-r--r--include/asm-arm/arch-at91/timex.h22
-rw-r--r--include/asm-arm/arch-ebsa285/hardware.h26
-rw-r--r--include/asm-arm/arch-ebsa285/memory.h19
-rw-r--r--include/asm-arm/arch-ebsa285/vmalloc.h4
-rw-r--r--include/asm-arm/arch-imx/hardware.h8
-rw-r--r--include/asm-arm/arch-imx/imx-dma.h2
-rw-r--r--include/asm-arm/arch-imx/imx-uart.h2
-rw-r--r--include/asm-arm/arch-iop13xx/dma.h2
-rw-r--r--include/asm-arm/arch-iop32x/gpio.h6
-rw-r--r--include/asm-arm/arch-iop33x/gpio.h6
-rw-r--r--include/asm-arm/arch-ixp4xx/fsg.h50
-rw-r--r--include/asm-arm/arch-ixp4xx/hardware.h1
-rw-r--r--include/asm-arm/arch-ixp4xx/irqs.h7
-rw-r--r--include/asm-arm/arch-kirkwood/debug-macro.S20
-rw-r--r--include/asm-arm/arch-kirkwood/dma.h1
-rw-r--r--include/asm-arm/arch-kirkwood/entry-macro.S40
-rw-r--r--include/asm-arm/arch-kirkwood/hardware.h21
-rw-r--r--include/asm-arm/arch-kirkwood/io.h26
-rw-r--r--include/asm-arm/arch-kirkwood/irqs.h63
-rw-r--r--include/asm-arm/arch-kirkwood/kirkwood.h100
-rw-r--r--include/asm-arm/arch-kirkwood/memory.h14
-rw-r--r--include/asm-arm/arch-kirkwood/system.h37
-rw-r--r--include/asm-arm/arch-kirkwood/timex.h11
-rw-r--r--include/asm-arm/arch-kirkwood/uncompress.h47
-rw-r--r--include/asm-arm/arch-kirkwood/vmalloc.h5
-rw-r--r--include/asm-arm/arch-loki/debug-macro.S20
-rw-r--r--include/asm-arm/arch-loki/dma.h1
-rw-r--r--include/asm-arm/arch-loki/entry-macro.S30
-rw-r--r--include/asm-arm/arch-loki/hardware.h15
-rw-r--r--include/asm-arm/arch-loki/io.h26
-rw-r--r--include/asm-arm/arch-loki/irqs.h58
-rw-r--r--include/asm-arm/arch-loki/loki.h97
-rw-r--r--include/asm-arm/arch-loki/memory.h14
-rw-r--r--include/asm-arm/arch-loki/system.h37
-rw-r--r--include/asm-arm/arch-loki/timex.h11
-rw-r--r--include/asm-arm/arch-loki/uncompress.h47
-rw-r--r--include/asm-arm/arch-loki/vmalloc.h5
-rw-r--r--include/asm-arm/arch-msm/irqs.h1
-rw-r--r--include/asm-arm/arch-msm/timex.h1
-rw-r--r--include/asm-arm/arch-mv78xx0/debug-macro.S20
-rw-r--r--include/asm-arm/arch-mv78xx0/dma.h1
-rw-r--r--include/asm-arm/arch-mv78xx0/entry-macro.S39
-rw-r--r--include/asm-arm/arch-mv78xx0/hardware.h21
-rw-r--r--include/asm-arm/arch-mv78xx0/io.h26
-rw-r--r--include/asm-arm/arch-mv78xx0/irqs.h91
-rw-r--r--include/asm-arm/arch-mv78xx0/memory.h14
-rw-r--r--include/asm-arm/arch-mv78xx0/mv78xx0.h126
-rw-r--r--include/asm-arm/arch-mv78xx0/system.h37
-rw-r--r--include/asm-arm/arch-mv78xx0/timex.h9
-rw-r--r--include/asm-arm/arch-mv78xx0/uncompress.h47
-rw-r--r--include/asm-arm/arch-mv78xx0/vmalloc.h5
-rw-r--r--include/asm-arm/arch-mxc/board-mx27ads.h354
-rw-r--r--include/asm-arm/arch-mxc/board-mx31ads.h5
-rw-r--r--include/asm-arm/arch-mxc/board-mx31lite.h38
-rw-r--r--include/asm-arm/arch-mxc/board-pcm037.h27
-rw-r--r--include/asm-arm/arch-mxc/board-pcm038.h41
-rw-r--r--include/asm-arm/arch-mxc/clock.h67
-rw-r--r--include/asm-arm/arch-mxc/common.h6
-rw-r--r--include/asm-arm/arch-mxc/debug-macro.S49
-rw-r--r--include/asm-arm/arch-mxc/gpio.h42
-rw-r--r--include/asm-arm/arch-mxc/hardware.h38
-rw-r--r--include/asm-arm/arch-mxc/iim.h77
-rw-r--r--include/asm-arm/arch-mxc/imx-uart.h32
-rw-r--r--include/asm-arm/arch-mxc/iomux-mx1-mx2.h372
-rw-r--r--include/asm-arm/arch-mxc/iomux-mx3.h501
-rw-r--r--include/asm-arm/arch-mxc/irqs.h13
-rw-r--r--include/asm-arm/arch-mxc/mx27.h302
-rw-r--r--include/asm-arm/arch-mxc/mx31.h21
-rw-r--r--include/asm-arm/arch-mxc/mxc.h152
-rw-r--r--include/asm-arm/arch-mxc/mxc_timer.h158
-rw-r--r--include/asm-arm/arch-ns9xxx/hardware.h4
-rw-r--r--include/asm-arm/arch-omap/board-2430sdp.h5
-rw-r--r--include/asm-arm/arch-omap/board-h3.h6
-rw-r--r--include/asm-arm/arch-omap/board-innovator.h3
-rw-r--r--include/asm-arm/arch-omap/board-perseus2.h6
-rw-r--r--include/asm-arm/arch-omap/clock.h17
-rw-r--r--include/asm-arm/arch-omap/common.h15
-rw-r--r--include/asm-arm/arch-omap/control.h4
-rw-r--r--include/asm-arm/arch-omap/cpu.h39
-rw-r--r--include/asm-arm/arch-omap/dma.h378
-rw-r--r--include/asm-arm/arch-omap/dmtimer.h1
-rw-r--r--include/asm-arm/arch-omap/fpga.h49
-rw-r--r--include/asm-arm/arch-omap/hardware.h1
-rw-r--r--include/asm-arm/arch-omap/io.h26
-rw-r--r--include/asm-arm/arch-omap/irqs.h44
-rw-r--r--include/asm-arm/arch-omap/mcbsp.h62
-rw-r--r--include/asm-arm/arch-omap/omap34xx.h72
-rw-r--r--include/asm-arm/arch-omap/sram.h37
-rw-r--r--include/asm-arm/arch-omap/tc.h10
-rw-r--r--include/asm-arm/arch-omap/usb.h23
-rw-r--r--include/asm-arm/arch-orion5x/io.h8
-rw-r--r--include/asm-arm/arch-orion5x/orion5x.h7
-rw-r--r--include/asm-arm/arch-orion5x/uncompress.h29
-rw-r--r--include/asm-arm/arch-pxa/audio.h2
-rw-r--r--include/asm-arm/arch-pxa/hardware.h9
-rw-r--r--include/asm-arm/arch-pxa/irda.h4
-rw-r--r--include/asm-arm/arch-pxa/pxa-regs.h570
-rw-r--r--include/asm-arm/arch-pxa/pxa25x-udc.h163
-rw-r--r--include/asm-arm/arch-pxa/pxa27x-udc.h257
-rw-r--r--include/asm-arm/arch-pxa/pxa2xx-gpio.h2
-rw-r--r--include/asm-arm/arch-pxa/pxa2xx-regs.h162
-rw-r--r--include/asm-arm/arch-pxa/system.h1
-rw-r--r--include/asm-arm/arch-pxa/zylonite.h1
-rw-r--r--include/asm-arm/arch-rpc/io.h5
-rw-r--r--include/asm-arm/arch-s3c2410/gpio.h74
-rw-r--r--include/asm-arm/arch-s3c2410/regs-clock.h2
-rw-r--r--include/asm-arm/assembler.h15
-rw-r--r--include/asm-arm/cacheflush.h13
-rw-r--r--include/asm-arm/dyntick.h6
-rw-r--r--include/asm-arm/ecard.h35
-rw-r--r--include/asm-arm/hardware/iop3xx-gpio.h73
-rw-r--r--include/asm-arm/hw_irq.h11
-rw-r--r--include/asm-arm/kexec.h2
-rw-r--r--include/asm-arm/mach/time.h22
-rw-r--r--include/asm-arm/mmu_context.h5
-rw-r--r--include/asm-arm/plat-orion/cache-feroceon-l2.h11
-rw-r--r--include/asm-arm/plat-orion/orion_nand.h1
-rw-r--r--include/asm-arm/plat-orion/pcie.h1
-rw-r--r--include/asm-arm/plat-s3c/regs-timer.h9
-rw-r--r--include/asm-arm/plat-s3c24xx/devs.h7
-rw-r--r--include/asm-arm/rtc.h43
-rw-r--r--include/asm-arm/tlbflush.h30
-rw-r--r--include/linux/pwm.h31
-rw-r--r--include/linux/pwm_backlight.h17
-rw-r--r--kernel/hrtimer.c2
-rw-r--r--kernel/sysctl.c12
-rw-r--r--kernel/timer.c10
-rw-r--r--sound/soc/at91/at91-ssc.c2
-rw-r--r--sound/soc/pxa/pxa2xx-i2s.c12
495 files changed, 44831 insertions, 9936 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 795c487af8e4..b3a5aad7e629 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1242,6 +1242,11 @@ and is between 256 and 4096 characters. It is defined in the file
mtdparts= [MTD]
See drivers/mtd/cmdlinepart.c.
+ mtdset= [ARM]
+ ARM/S3C2412 JIVE boot control
+
+ See arch/arm/mach-s3c2412/mach-jive.c
+
mtouchusb.raw_coordinates=
[HW] Make the MicroTouch USB driver use raw coordinates
('y', default) or cooked coordinates ('n')
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3845e5c8a34f..258f1369fb0c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -24,6 +24,9 @@ config ARM
Europe. There is an ARM Linux project with a web page at
<http://www.arm.linux.org.uk/>.
+config HAVE_PWM
+ bool
+
config SYS_SUPPORTS_APM_EMULATION
bool
@@ -86,6 +89,11 @@ config STACKTRACE_SUPPORT
bool
default y
+config HAVE_LATENCYTOP_SUPPORT
+ bool
+ depends on !SMP
+ default y
+
config LOCKDEP_SUPPORT
bool
default y
@@ -149,6 +157,10 @@ config FIQ
config ARCH_MTD_XIP
bool
+config GENERIC_HARDIRQS_NO__DO_IRQ
+ bool
+ def_bool y
+
if OPROFILE
config OPROFILE_ARMV6
@@ -234,13 +246,6 @@ config ARCH_CLPS711X
help
Support for Cirrus Logic 711x/721x based boards.
-config ARCH_CO285
- bool "Co-EBSA285"
- select FOOTBRIDGE
- select FOOTBRIDGE_ADDIN
- help
- Support for Intel's EBSA285 companion chip.
-
config ARCH_EBSA110
bool "EBSA-110"
select ISA
@@ -301,6 +306,8 @@ config ARCH_IOP32X
depends on MMU
select PLAT_IOP
select PCI
+ select GENERIC_GPIO
+ select HAVE_GPIO_LIB
help
Support for Intel's 80219 and IOP32X (XScale) family of
processors.
@@ -310,6 +317,8 @@ config ARCH_IOP33X
depends on MMU
select PLAT_IOP
select PCI
+ select GENERIC_GPIO
+ select HAVE_GPIO_LIB
help
Support for Intel's IOP33X (XScale) family of processors.
@@ -349,6 +358,16 @@ config ARCH_L7200
If you have any questions or comments about the Linux kernel port
to this board, send e-mail to <sjhill@cotw.com>.
+config ARCH_KIRKWOOD
+ bool "Marvell Kirkwood"
+ select PCI
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select PLAT_ORION
+ help
+ Support for the following Marvell Kirkwood series SoCs:
+ 88F6180, 88F6192 and 88F6281.
+
config ARCH_KS8695
bool "Micrel/Kendin KS8695"
select GENERIC_GPIO
@@ -367,9 +386,31 @@ config ARCH_NS9XXX
<http://www.digi.com/products/microprocessors/index.jsp>
+config ARCH_LOKI
+ bool "Marvell Loki (88RC8480)"
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select PLAT_ORION
+ help
+ Support for the Marvell Loki (88RC8480) SoC.
+
+config ARCH_MV78XX0
+ bool "Marvell MV78xx0"
+ select PCI
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select PLAT_ORION
+ help
+ Support for the following Marvell MV78xx0 series SoCs:
+ MV781x0, MV782x0.
+
config ARCH_MXC
bool "Freescale MXC/iMX-based"
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
select ARCH_MTD_XIP
+ select GENERIC_GPIO
+ select HAVE_GPIO_LIB
help
Support for Freescale MXC/iMX-based family of processors
@@ -383,7 +424,8 @@ config ARCH_ORION5X
select PLAT_ORION
help
Support for the following Marvell Orion 5x series SoCs:
- Orion-1 (5181), Orion-NAS (5182), Orion-2 (5281.)
+ Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
+ Orion-2 (5281).
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
@@ -408,6 +450,7 @@ config ARCH_RPC
select FIQ
select TIMER_ACORN
select ARCH_MAY_HAVE_PC_FDC
+ select HAVE_PATA_PLATFORM
select ISA_DMA_API
select NO_IOPORT
help
@@ -504,6 +547,10 @@ source "arch/arm/mach-ixp2000/Kconfig"
source "arch/arm/mach-ixp23xx/Kconfig"
+source "arch/arm/mach-loki/Kconfig"
+
+source "arch/arm/mach-mv78xx0/Kconfig"
+
source "arch/arm/mach-pxa/Kconfig"
source "arch/arm/mach-sa1100/Kconfig"
@@ -516,6 +563,8 @@ source "arch/arm/mach-omap2/Kconfig"
source "arch/arm/mach-orion5x/Kconfig"
+source "arch/arm/mach-kirkwood/Kconfig"
+
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s3c/Kconfig"
@@ -705,27 +754,6 @@ config PREEMPT
Say Y here if you are building a kernel for a desktop, embedded
or real-time system. Say N if you are unsure.
-config NO_IDLE_HZ
- bool "Dynamic tick timer"
- depends on !GENERIC_CLOCKEVENTS
- help
- Select this option if you want to disable continuous timer ticks
- and have them programmed to occur as required. This option saves
- power as the system can remain in idle state for longer.
-
- By default dynamic tick is disabled during the boot, and can be
- manually enabled with:
-
- echo 1 > /sys/devices/system/timer/timer0/dyn_tick
-
- Alternatively, if you want dynamic tick automatically enabled
- during boot, pass "dyntick=enable" via the kernel command string.
-
- Please note that dynamic tick may affect the accuracy of
- timekeeping on some platforms depending on the implementation.
- Currently at least OMAP, PXA2xx and SA11x0 platforms are known
- to have accurate timekeeping with dynamic tick.
-
config HZ
int
default 128 if ARCH_L7200
@@ -791,7 +819,7 @@ source "mm/Kconfig"
config LEDS
bool "Timer and CPU usage LEDs"
- depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \
+ depends on ARCH_CDB89712 || ARCH_EBSA110 || \
ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e72db27e0ba0..b20995a82e04 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -100,8 +100,6 @@ textofs-y := 0x00008000
incdir-$(CONFIG_ARCH_CLPS7500) := cl7500
machine-$(CONFIG_FOOTBRIDGE) := footbridge
incdir-$(CONFIG_FOOTBRIDGE) := ebsa285
- machine-$(CONFIG_ARCH_CO285) := footbridge
- incdir-$(CONFIG_ARCH_CO285) := ebsa285
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SA1100) := sa1100
ifeq ($(CONFIG_ARCH_SA1100),y)
@@ -135,11 +133,15 @@ endif
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
machine-$(CONFIG_ARCH_DAVINCI) := davinci
+ machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood
machine-$(CONFIG_ARCH_KS8695) := ks8695
incdir-$(CONFIG_ARCH_MXC) := mxc
+ machine-$(CONFIG_ARCH_MX2) := mx2
machine-$(CONFIG_ARCH_MX3) := mx3
machine-$(CONFIG_ARCH_ORION5X) := orion5x
machine-$(CONFIG_ARCH_MSM7X00A) := msm
+ machine-$(CONFIG_ARCH_LOKI) := loki
+ machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
@@ -190,8 +192,6 @@ core-$(CONFIG_PLAT_S3C24XX) += arch/arm/plat-s3c24xx/
core-$(CONFIG_ARCH_MXC) += arch/arm/plat-mxc/
drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/
-drivers-$(CONFIG_ARCH_CLPS7500) += drivers/acorn/char/
-drivers-$(CONFIG_ARCH_L7200) += drivers/acorn/char/
libs-y := arch/arm/lib/ $(libs-y)
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 3c2c8f2a1dc4..de41daeab5e9 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -623,8 +623,8 @@ proc_types:
b __armv4_mmu_cache_off
b __armv4_mmu_cache_flush
- .word 0x56055310 @ Feroceon
- .word 0xfffffff0
+ .word 0x56050000 @ Feroceon
+ .word 0xff0f0000
b __armv4_mmu_cache_on
b __armv4_mmu_cache_off
b __armv5tej_mmu_cache_flush
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 3d0b9fa42f84..325e4b6a6afb 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -2,7 +2,6 @@
# Makefile for the linux kernel.
#
-obj-y += rtctime.o
obj-$(CONFIG_ARM_GIC) += gic.o
obj-$(CONFIG_ARM_VIC) += vic.o
obj-$(CONFIG_ICST525) += icst525.o
diff --git a/arch/arm/common/rtctime.c b/arch/arm/common/rtctime.c
deleted file mode 100644
index aa8f7739c822..000000000000
--- a/arch/arm/common/rtctime.c
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- * linux/arch/arm/common/rtctime.c
- *
- * Copyright (C) 2003 Deep Blue Solutions Ltd.
- * Based on sa1100-rtc.c, Nils Faerber, CIH, Nicolas Pitre.
- * Based on rtc.c by Paul Gortmaker
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <linux/rtc.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-#include <linux/miscdevice.h>
-#include <linux/spinlock.h>
-#include <linux/capability.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-
-#include <asm/rtc.h>
-
-static DECLARE_WAIT_QUEUE_HEAD(rtc_wait);
-static struct fasync_struct *rtc_async_queue;
-
-/*
- * rtc_lock protects rtc_irq_data
- */
-static DEFINE_SPINLOCK(rtc_lock);
-static unsigned long rtc_irq_data;
-
-/*
- * rtc_sem protects rtc_inuse and rtc_ops
- */
-static DEFINE_MUTEX(rtc_mutex);
-static unsigned long rtc_inuse;
-static struct rtc_ops *rtc_ops;
-
-#define rtc_epoch 1900UL
-
-/*
- * Calculate the next alarm time given the requested alarm time mask
- * and the current time.
- */
-void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc_time *alrm)
-{
- unsigned long next_time;
- unsigned long now_time;
-
- next->tm_year = now->tm_year;
- next->tm_mon = now->tm_mon;
- next->tm_mday = now->tm_mday;
- next->tm_hour = alrm->tm_hour;
- next->tm_min = alrm->tm_min;
- next->tm_sec = alrm->tm_sec;
-
- rtc_tm_to_time(now, &now_time);
- rtc_tm_to_time(next, &next_time);
-
- if (next_time < now_time) {
- /* Advance one day */
- next_time += 60 * 60 * 24;
- rtc_time_to_tm(next_time, next);
- }
-}
-EXPORT_SYMBOL(rtc_next_alarm_time);
-
-static inline int rtc_arm_read_time(struct rtc_ops *ops, struct rtc_time *tm)
-{
- memset(tm, 0, sizeof(struct rtc_time));
- return ops->read_time(tm);
-}
-
-static inline int rtc_arm_set_time(struct rtc_ops *ops, struct rtc_time *tm)
-{
- int ret;
-
- ret = rtc_valid_tm(tm);
- if (ret == 0)
- ret = ops->set_time(tm);
-
- return ret;
-}
-
-static inline int rtc_arm_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
-{
- int ret = -EINVAL;
- if (ops->read_alarm) {
- memset(alrm, 0, sizeof(struct rtc_wkalrm));
- ret = ops->read_alarm(alrm);
- }
- return ret;
-}
-
-static inline int rtc_arm_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
-{
- int ret = -EINVAL;
- if (ops->set_alarm)
- ret = ops->set_alarm(alrm);
- return ret;
-}
-
-void rtc_update(unsigned long num, unsigned long events)
-{
- spin_lock(&rtc_lock);
- rtc_irq_data = (rtc_irq_data + (num << 8)) | events;
- spin_unlock(&rtc_lock);
-
- wake_up_interruptible(&rtc_wait);
- kill_fasync(&rtc_async_queue, SIGIO, POLL_IN);
-}
-EXPORT_SYMBOL(rtc_update);
-
-
-static ssize_t
-rtc_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
-{
- DECLARE_WAITQUEUE(wait, current);
- unsigned long data;
- ssize_t ret;
-
- if (count < sizeof(unsigned long))
- return -EINVAL;
-
- add_wait_queue(&rtc_wait, &wait);
- do {
- __set_current_state(TASK_INTERRUPTIBLE);
-
- spin_lock_irq(&rtc_lock);
- data = rtc_irq_data;
- rtc_irq_data = 0;
- spin_unlock_irq(&rtc_lock);
-
- if (data != 0) {
- ret = 0;
- break;
- }
- if (file->f_flags & O_NONBLOCK) {
- ret = -EAGAIN;
- break;
- }
- if (signal_pending(current)) {
- ret = -ERESTARTSYS;
- break;
- }
- schedule();
- } while (1);
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&rtc_wait, &wait);
-
- if (ret == 0) {
- ret = put_user(data, (unsigned long __user *)buf);
- if (ret == 0)
- ret = sizeof(unsigned long);
- }
- return ret;
-}
-
-static unsigned int rtc_poll(struct file *file, poll_table *wait)
-{
- unsigned long data;
-
- poll_wait(file, &rtc_wait, wait);
-
- spin_lock_irq(&rtc_lock);
- data = rtc_irq_data;
- spin_unlock_irq(&rtc_lock);
-
- return data != 0 ? POLLIN | POLLRDNORM : 0;
-}
-
-static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- struct rtc_ops *ops = file->private_data;
- struct rtc_time tm;
- struct rtc_wkalrm alrm;
- void __user *uarg = (void __user *)arg;
- int ret = -EINVAL;
-
- switch (cmd) {
- case RTC_ALM_READ:
- ret = rtc_arm_read_alarm(ops, &alrm);
- if (ret)
- break;
- ret = copy_to_user(uarg, &alrm.time, sizeof(tm));
- if (ret)
- ret = -EFAULT;
- break;
-
- case RTC_ALM_SET:
- ret = copy_from_user(&alrm.time, uarg, sizeof(tm));
- if (ret) {
- ret = -EFAULT;
- break;
- }
- alrm.enabled = 0;
- alrm.pending = 0;
- alrm.time.tm_mday = -1;
- alrm.time.tm_mon = -1;
- alrm.time.tm_year = -1;
- alrm.time.tm_wday = -1;
- alrm.time.tm_yday = -1;
- alrm.time.tm_isdst = -1;
- ret = rtc_arm_set_alarm(ops, &alrm);
- break;
-
- case RTC_RD_TIME:
- ret = rtc_arm_read_time(ops, &tm);
- if (ret)
- break;
- ret = copy_to_user(uarg, &tm, sizeof(tm));
- if (ret)
- ret = -EFAULT;
- break;
-
- case RTC_SET_TIME:
- if (!capable(CAP_SYS_TIME)) {
- ret = -EACCES;
- break;
- }
- ret = copy_from_user(&tm, uarg, sizeof(tm));
- if (ret) {
- ret = -EFAULT;
- break;
- }
- ret = rtc_arm_set_time(ops, &tm);
- break;
-
- case RTC_EPOCH_SET:
-#ifndef rtc_epoch
- /*
- * There were no RTC clocks before 1900.
- */
- if (arg < 1900) {
- ret = -EINVAL;
- break;
- }
- if (!capable(CAP_SYS_TIME)) {
- ret = -EACCES;
- break;
- }
- rtc_epoch = arg;
- ret = 0;
-#endif
- break;
-
- case RTC_EPOCH_READ:
- ret = put_user(rtc_epoch, (unsigned long __user *)uarg);
- break;
-
- case RTC_WKALM_SET:
- ret = copy_from_user(&alrm, uarg, sizeof(alrm));
- if (ret) {
- ret = -EFAULT;
- break;
- }
- ret = rtc_arm_set_alarm(ops, &alrm);
- break;
-
- case RTC_WKALM_RD:
- ret = rtc_arm_read_alarm(ops, &alrm);
- if (ret)
- break;
- ret = copy_to_user(uarg, &alrm, sizeof(alrm));
- if (ret)
- ret = -EFAULT;
- break;
-
- default:
- if (ops->ioctl)
- ret = ops->ioctl(cmd, arg);
- break;
- }
- return ret;
-}
-
-static int rtc_open(struct inode *inode, struct file *file)
-{
- int ret;
-
- mutex_lock(&rtc_mutex);
-
- if (rtc_inuse) {
- ret = -EBUSY;
- } else if (!rtc_ops || !try_module_get(rtc_ops->owner)) {
- ret = -ENODEV;
- } else {
- file->private_data = rtc_ops;
-
- ret = rtc_ops->open ? rtc_ops->open() : 0;
- if (ret == 0) {
- spin_lock_irq(&rtc_lock);
- rtc_irq_data = 0;
- spin_unlock_irq(&rtc_lock);
-
- rtc_inuse = 1;
- }
- }
- mutex_unlock(&rtc_mutex);
-
- return ret;
-}
-
-static int rtc_release(struct inode *inode, struct file *file)
-{
- struct rtc_ops *ops = file->private_data;
-
- if (ops->release)
- ops->release();
-
- spin_lock_irq(&rtc_lock);
- rtc_irq_data = 0;
- spin_unlock_irq(&rtc_lock);
-
- module_put(rtc_ops->owner);
- rtc_inuse = 0;
-
- return 0;
-}
-
-static int rtc_fasync(int fd, struct file *file, int on)
-{
- return fasync_helper(fd, file, on, &rtc_async_queue);
-}
-
-static const struct file_operations rtc_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .read = rtc_read,
- .poll = rtc_poll,
- .ioctl = rtc_ioctl,
- .open = rtc_open,
- .release = rtc_release,
- .fasync = rtc_fasync,
-};
-
-static struct miscdevice rtc_miscdev = {
- .minor = RTC_MINOR,
- .name = "rtc",
- .fops = &rtc_fops,
-};
-
-
-static int rtc_read_proc(char *page, char **start, off_t off, int count, int *eof, void *data)
-{
- struct rtc_ops *ops = data;
- struct rtc_wkalrm alrm;
- struct rtc_time tm;
- char *p = page;
-
- if (rtc_arm_read_time(ops, &tm) == 0) {
- p += sprintf(p,
- "rtc_time\t: %02d:%02d:%02d\n"
- "rtc_date\t: %04d-%02d-%02d\n"
- "rtc_epoch\t: %04lu\n",
- tm.tm_hour, tm.tm_min, tm.tm_sec,
- tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
- rtc_epoch);
- }
-
- if (rtc_arm_read_alarm(ops, &alrm) == 0) {
- p += sprintf(p, "alrm_time\t: ");
- if ((unsigned int)alrm.time.tm_hour <= 24)
- p += sprintf(p, "%02d:", alrm.time.tm_hour);
- else
- p += sprintf(p, "**:");
- if ((unsigned int)alrm.time.tm_min <= 59)
- p += sprintf(p, "%02d:", alrm.time.tm_min);
- else
- p += sprintf(p, "**:");
- if ((unsigned int)alrm.time.tm_sec <= 59)
- p += sprintf(p, "%02d\n", alrm.time.tm_sec);
- else
- p += sprintf(p, "**\n");
-
- p += sprintf(p, "alrm_date\t: ");
- if ((unsigned int)alrm.time.tm_year <= 200)
- p += sprintf(p, "%04d-", alrm.time.tm_year + 1900);
- else
- p += sprintf(p, "****-");
- if ((unsigned int)alrm.time.tm_mon <= 11)
- p += sprintf(p, "%02d-", alrm.time.tm_mon + 1);
- else
- p += sprintf(p, "**-");
- if ((unsigned int)alrm.time.tm_mday <= 31)
- p += sprintf(p, "%02d\n", alrm.time.tm_mday);
- else
- p += sprintf(p, "**\n");
- p += sprintf(p, "alrm_wakeup\t: %s\n",
- alrm.enabled ? "yes" : "no");
- p += sprintf(p, "alrm_pending\t: %s\n",
- alrm.pending ? "yes" : "no");
- }
-
- if (ops->proc)
- p += ops->proc(p);
-
- return p - page;
-}
-
-int register_rtc(struct rtc_ops *ops)
-{
- int ret = -EBUSY;
-
- mutex_lock(&rtc_mutex);
- if (rtc_ops == NULL) {
- rtc_ops = ops;
-
- ret = misc_register(&rtc_miscdev);
- if (ret == 0)
- create_proc_read_entry("driver/rtc", 0, NULL,
- rtc_read_proc, ops);
- }
- mutex_unlock(&rtc_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL(register_rtc);
-
-void unregister_rtc(struct rtc_ops *rtc)
-{
- mutex_lock(&rtc_mutex);
- if (rtc == rtc_ops) {
- remove_proc_entry("driver/rtc", NULL);
- misc_deregister(&rtc_miscdev);
- rtc_ops = NULL;
- }
- mutex_unlock(&rtc_mutex);
-}
-EXPORT_SYMBOL(unregister_rtc);
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index 5bba5255b119..8822b684d474 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -31,6 +31,7 @@
#include <asm/irq.h>
#include <asm/arch/pm.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/sharpsl.h>
#include <asm/hardware/sharpsl_pm.h>
@@ -157,6 +158,7 @@ static void sharpsl_battery_thread(struct work_struct *private_)
dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
+#ifdef CONFIG_BACKLIGHT_CORGI
/* If battery is low. limit backlight intensity to save power. */
if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
@@ -169,6 +171,7 @@ static void sharpsl_battery_thread(struct work_struct *private_)
sharpsl_pm.machinfo->backlight_limit(0);
sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
}
+#endif
/* Suspend if critical battery level */
if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig
index e32e73648129..be2b2f38fd94 100644
--- a/arch/arm/configs/at91cap9adk_defconfig
+++ b/arch/arm/configs/at91cap9adk_defconfig
@@ -213,7 +213,6 @@ CONFIG_CPU_CP15_MMU=y
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
@@ -907,7 +906,32 @@ CONFIG_USB_MON=y
#
# USB Gadget Support
#
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@@ -926,7 +950,59 @@ CONFIG_MMC_AT91=y
# CONFIG_MMC_SPI is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
#
# File systems
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index 2dbbbc3d4ac3..868fb7b9530b 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -169,7 +169,6 @@ CONFIG_AT91_CF=y
# Kernel Features
#
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index 6e994f7820c6..de43fc675616 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -160,7 +160,6 @@ CONFIG_ISA_DMA_API=y
# Kernel Features
#
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
index f659c938473f..2011adfa6758 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260ek_defconfig
@@ -220,7 +220,6 @@ CONFIG_CPU_CP15_MMU=y
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
index 3802e85f7483..4049768962d2 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -213,7 +213,6 @@ CONFIG_CPU_CP15_MMU=y
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
index 32a0d74e0c89..fa1c5aecb5a8 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -213,7 +213,6 @@ CONFIG_CPU_CP15_MMU=y
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig
index 6bea0901bdf0..c06863847364 100644
--- a/arch/arm/configs/em_x270_defconfig
+++ b/arch/arm/configs/at91sam9g20ek_defconfig
@@ -1,13 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22
-# Mon Jul 9 15:18:20 2007
+# Linux kernel version: 2.6.24
+# Tue Jun 10 15:51:52 2008
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
-# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
@@ -22,45 +22,40 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION="-em-x270"
+CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
+# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
+# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -71,42 +66,35 @@ CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
@@ -120,7 +108,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
+CONFIG_ARCH_AT91=y
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
@@ -139,8 +127,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
@@ -150,25 +139,60 @@ CONFIG_ARCH_PXA=y
# CONFIG_ARCH_OMAP is not set
#
-# Intel PXA2xx Implementations
+# Boot options
+#
+
+#
+# Power management
#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_MACH_EM_X270=y
-CONFIG_PXA27x=y
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+CONFIG_ARCH_AT91SAM9G20=y
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9G20 Board Type
+#
+CONFIG_MACH_AT91SAM9G20EK=y
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_AT91_SLOW_CLOCK is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
#
# Processor Type
#
CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
+CONFIG_CPU_ARM926T=y
CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_ABRT_EV5TJ=y
CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
@@ -176,28 +200,28 @@ CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
-CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
#
# Bus support
#
+# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
# Kernel Features
#
# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
@@ -209,9 +233,14 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -219,7 +248,7 @@ CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
@@ -233,6 +262,7 @@ CONFIG_CMDLINE=""
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
#
# Userspace binary formats
@@ -245,10 +275,12 @@ CONFIG_BINFMT_ELF=y
# Power management options
#
CONFIG_PM=y
-CONFIG_PM_LEGACY=y
+# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_APM_EMULATION=m
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
#
# Networking
@@ -261,17 +293,13 @@ CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
@@ -283,9 +311,10 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -311,10 +340,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -323,28 +348,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-# CONFIG_BT_RFCOMM_TTY is not set
-CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-CONFIG_BT_HCIUART=m
-# CONFIG_BT_HCIUART_H4 is not set
-# CONFIG_BT_HCIUART_BCSP is not set
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
@@ -353,13 +357,9 @@ CONFIG_BT_HCIBFUSB=m
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_IEEE80211_SOFTMAC is not set
+# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -368,23 +368,18 @@ CONFIG_IEEE80211_CRYPT_CCMP=m
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
#
@@ -398,15 +393,13 @@ CONFIG_MTD_BLOCK=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -425,12 +418,13 @@ CONFIG_MTD_CFI_I2=y
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -446,32 +440,23 @@ CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
+CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_AT91_ECC_SOFT=y
+# CONFIG_MTD_NAND_AT91_ECC_HW is not set
+# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
# CONFIG_MTD_NAND_NANDSIM is not set
-CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -479,20 +464,24 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=12000
+CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_IDE is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_PROC_FS is not set
+CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
@@ -507,7 +496,7 @@ CONFIG_BLK_DEV_SD=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
-# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
@@ -519,39 +508,46 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
-CONFIG_DM9000=y
-# CONFIG_SMC911X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@@ -568,7 +564,6 @@ CONFIG_DM9000=y
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
@@ -577,10 +572,6 @@ CONFIG_DM9000=y
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
#
@@ -595,10 +586,9 @@ CONFIG_INPUT=y
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
@@ -612,29 +602,18 @@ CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
@@ -655,45 +634,50 @@ CONFIG_HW_CONSOLE=y
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
# SPI support
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
#
-# Dallas's 1-wire bus
+# SPI Master Controller Drivers
#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
@@ -701,19 +685,6 @@ CONFIG_HW_RANDOM=m
# CONFIG_MFD_SM501 is not set
#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -723,81 +694,51 @@ CONFIG_HW_RANDOM=m
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
-CONFIG_SOUND=m
+CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
-CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
@@ -805,8 +746,13 @@ CONFIG_SND_AC97_CODEC=m
#
# ALSA ARM devices
#
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_AC97=m
+# CONFIG_SND_AT91_AC97 is not set
+
+#
+# SPI devices
+#
+CONFIG_SND_AT73C213=y
+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
#
# USB devices
@@ -820,16 +766,17 @@ CONFIG_SND_PXA2XX_AC97=m
# CONFIG_SND_SOC is not set
#
-# Open Sound System
+# SoC Audio support for SuperH
#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
#
-# HID Devices
+# Open Sound System
#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
@@ -838,10 +785,7 @@ CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
@@ -855,6 +799,7 @@ CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
@@ -866,6 +811,7 @@ CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
@@ -884,6 +830,7 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
@@ -898,7 +845,7 @@ CONFIG_USB_STORAGE=y
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
+CONFIG_USB_MON=y
#
# USB port drivers
@@ -939,26 +886,66 @@ CONFIG_USB_STORAGE=y
#
# USB Gadget Support
#
-# CONFIG_USB_GADGET is not set
-CONFIG_MMC=m
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ETH is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD Card Drivers
#
-CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
#
# MMC/SD Host Controller Drivers
#
-CONFIG_MMC_PXA=m
+CONFIG_MMC_AT91=y
+# CONFIG_MMC_SPI is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
#
-# Real Time Clock
+# LED drivers
#
+CONFIG_LEDS_ATMEL_PWM=y
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
@@ -970,26 +957,28 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_TEST is not set
#
-# I2C RTC drivers
-#
-
-#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_V3020=m
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
-CONFIG_RTC_DRV_SA1100=m
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
#
# File systems
@@ -997,14 +986,8 @@ CONFIG_RTC_DRV_SA1100=m
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
@@ -1046,7 +1029,6 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -1062,22 +1044,21 @@ CONFIG_RAMFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -1092,29 +1073,23 @@ CONFIG_SUNRPC=y
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
@@ -1145,108 +1120,36 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
#
# Library routines
@@ -1256,10 +1159,10 @@ CONFIG_BITREVERSE=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
index 98e6746d02be..d8ec5f9ca6ec 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -211,7 +211,6 @@ CONFIG_CPU_CP15_MMU=y
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
index d846a492e5ce..85c80f723d8e 100644
--- a/arch/arm/configs/ateb9200_defconfig
+++ b/arch/arm/configs/ateb9200_defconfig
@@ -171,7 +171,6 @@ CONFIG_AT91_CF=m
# Kernel Features
#
CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 4264e273202d..f7622e658163 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -166,7 +166,6 @@ CONFIG_PCMCIA_SA1100=y
# Kernel Features
#
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index e8980a9bb893..9b8748a8d9dd 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -165,7 +165,6 @@ CONFIG_PCMCIA_PXA2XX=y
# Kernel Features
#
CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig
index 90ed214e3673..cfeb817ad21a 100644
--- a/arch/arm/configs/ecbat91_defconfig
+++ b/arch/arm/configs/ecbat91_defconfig
@@ -230,7 +230,6 @@ CONFIG_AT91_CF=y
#
# CONFIG_TICK_ONESHOT is not set
CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 24a701ab33e5..21aa013793c6 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -184,7 +184,6 @@ CONFIG_ARM_AMBA=y
# Kernel Features
#
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
index ed487b90dbed..493ecee24f94 100644
--- a/arch/arm/configs/eseries_pxa_defconfig
+++ b/arch/arm/configs/eseries_pxa_defconfig
@@ -251,7 +251,6 @@ CONFIG_PCMCIA_PXA2XX=m
# Kernel Features
#
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
diff --git a/arch/arm/configs/imx27ads_defconfig b/arch/arm/configs/imx27ads_defconfig
new file mode 100644
index 000000000000..bcd95b8dd2df
--- /dev/null
+++ b/arch/arm/configs/imx27ads_defconfig
@@ -0,0 +1,826 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc6
+# Fri Jun 20 16:29:34 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Freescale MXC Implementations
+#
+CONFIG_ARCH_MX2=y
+# CONFIG_ARCH_MX3 is not set
+
+#
+# MX2 family CPU support
+#
+CONFIG_MACH_MX27=y
+
+#
+# MX2 Platforms
+#
+CONFIG_MACH_MX27ADS=y
+# CONFIG_MACH_PCM038 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_FEC_OLD is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_IMX is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig
index 988b4d13e76f..482e57061053 100644
--- a/arch/arm/configs/iop13xx_defconfig
+++ b/arch/arm/configs/iop13xx_defconfig
@@ -197,7 +197,6 @@ CONFIG_PCI_LEGACY=y
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
index 83f40d4041a6..8612f58e1056 100644
--- a/arch/arm/configs/iop32x_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -201,7 +201,6 @@ CONFIG_PCI_LEGACY=y
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig
index 917afb5ccfac..8b0098d19d08 100644
--- a/arch/arm/configs/iop33x_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -197,7 +197,6 @@ CONFIG_PCI_LEGACY=y
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig
index f8f9793b526f..84680db6c615 100644
--- a/arch/arm/configs/ixp2000_defconfig
+++ b/arch/arm/configs/ixp2000_defconfig
@@ -184,7 +184,6 @@ CONFIG_PCI=y
# Kernel Features
#
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig
index 27cf022dd807..4a2f7b2372db 100644
--- a/arch/arm/configs/ixp23xx_defconfig
+++ b/arch/arm/configs/ixp23xx_defconfig
@@ -180,7 +180,6 @@ CONFIG_PCI=y
# Kernel Features
#
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index efa0485d2f7e..fc14932e3abd 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -165,6 +165,7 @@ CONFIG_ARCH_PRPMC1100=y
CONFIG_MACH_NAS100D=y
CONFIG_MACH_DSMG600=y
CONFIG_ARCH_IXDP4XX=y
+CONFIG_MACH_FSG=y
CONFIG_CPU_IXP46X=y
CONFIG_CPU_IXP43X=y
CONFIG_MACH_GTWX5715=y
@@ -770,7 +771,7 @@ CONFIG_ATA=y
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
+CONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
@@ -1143,7 +1144,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
+CONFIG_SENSORS_W83781D=y
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
@@ -1334,8 +1335,8 @@ CONFIG_LEDS_CLASS=y
#
# LED drivers
#
-# CONFIG_LEDS_IXP4XX is not set
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_FSG=y
#
# LED Triggers
@@ -1367,7 +1368,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
+CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
index ae51a40db6f9..6dd95a2c8d5d 100644
--- a/arch/arm/configs/kafa_defconfig
+++ b/arch/arm/configs/kafa_defconfig
@@ -162,7 +162,6 @@ CONFIG_CPU_TLB_V4WBI=y
# Kernel Features
#
CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
index c16537d9d67a..8e74c66f239d 100644
--- a/arch/arm/configs/kb9202_defconfig
+++ b/arch/arm/configs/kb9202_defconfig
@@ -126,7 +126,6 @@ CONFIG_ISA_DMA_API=y
#
# Kernel Features
#
-# CONFIG_NO_IDLE_HZ is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
new file mode 100644
index 000000000000..e3357ba10f1f
--- /dev/null
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -0,0 +1,1426 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc5
+# Sun Jun 22 15:51:25 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_KIRKWOOD=y
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Marvell Kirkwood Implementations
+#
+CONFIG_MACH_DB88F6281_BP=y
+CONFIG_MACH_RD88F6192_NAS=y
+CONFIG_MACH_RD88F6281=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+CONFIG_PLAT_ORION=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_FEROCEON=y
+# CONFIG_CPU_FEROCEON_OLD_ID is not set
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_FEROCEON=y
+CONFIG_CPU_TLB_FEROCEON=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_FEROCEON_L2=y
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_ORION=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+CONFIG_SATA_MV=y
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+CONFIG_E1000_NAPI=y
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_MV64XXX=y
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_ORION=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_LEDS_CLASS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_MV=y
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_MV_XOR=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_XFS_FS=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_ASYNC_CORE=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ks8695_defconfig b/arch/arm/configs/ks8695_defconfig
index 8ab21a0719e9..6077f2cb88e4 100644
--- a/arch/arm/configs/ks8695_defconfig
+++ b/arch/arm/configs/ks8695_defconfig
@@ -174,7 +174,6 @@ CONFIG_PCCARD_NONSTATIC=y
# Kernel Features
#
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/loki_defconfig b/arch/arm/configs/loki_defconfig
new file mode 100644
index 000000000000..17da7c3b3d53
--- /dev/null
+++ b/arch/arm/configs/loki_defconfig
@@ -0,0 +1,1147 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc5
+# Fri Jun 13 03:07:49 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_LOKI=y
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Marvell Loki (88RC8480) Implementations
+#
+CONFIG_MACH_LB88RC8480=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+CONFIG_PLAT_ORION=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_FEROCEON=y
+# CONFIG_CPU_FEROCEON_OLD_ID is not set
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_FEROCEON=y
+CONFIG_CPU_TLB_FEROCEON=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_FTL=y
+CONFIG_NFTL=y
+# CONFIG_NFTL_RW is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_ORION=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+CONFIG_SATA_MV=y
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_MV64XXX=y
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_LEDS_CLASS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_XFS_FS=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_LDM_PARTITION=y
+CONFIG_LDM_DEBUG=y
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig
index a3bf5833b87a..1a38d8e3fe66 100644
--- a/arch/arm/configs/lpd270_defconfig
+++ b/arch/arm/configs/lpd270_defconfig
@@ -173,7 +173,6 @@ CONFIG_XSCALE_PMU=y
# Kernel Features
#
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/lpd7a404_defconfig b/arch/arm/configs/lpd7a404_defconfig
index 46a0f7fe1fa5..7a2e932da1c6 100644
--- a/arch/arm/configs/lpd7a404_defconfig
+++ b/arch/arm/configs/lpd7a404_defconfig
@@ -148,7 +148,6 @@ CONFIG_ARM_AMBA=y
# Kernel Features
#
CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
# CONFIG_AEABI is not set
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
new file mode 100644
index 000000000000..d38ebf8721a4
--- /dev/null
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -0,0 +1,1445 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc5
+# Fri Jun 13 02:57:32 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+CONFIG_ARCH_MV78XX0=y
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Marvell MV78xx0 Implementations
+#
+CONFIG_MACH_DB78X00_BP=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+CONFIG_PLAT_ORION=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_FEROCEON=y
+CONFIG_CPU_FEROCEON_OLD_ID=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_FEROCEON=y
+CONFIG_CPU_TLB_FEROCEON=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_FEROCEON_L2=y
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_ORION=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+CONFIG_SATA_MV=y
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_MV64XXX=y
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+CONFIG_RTC_DRV_M41T80=y
+# CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx31ads_defconfig b/arch/arm/configs/mx31ads_defconfig
new file mode 100644
index 000000000000..e05271753e15
--- /dev/null
+++ b/arch/arm/configs/mx31ads_defconfig
@@ -0,0 +1,839 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc6
+# Fri Jun 20 16:21:11 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX2 is not set
+CONFIG_ARCH_MX3=y
+
+#
+# MX3 Options
+#
+CONFIG_MACH_MX31ADS=y
+# CONFIG_MACH_PCM037 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx31litekit_defconfig b/arch/arm/configs/mx31litekit_defconfig
new file mode 100644
index 000000000000..4f41c4135685
--- /dev/null
+++ b/arch/arm/configs/mx31litekit_defconfig
@@ -0,0 +1,1100 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc5
+# Fri Jun 13 14:23:39 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_GENERIC_GPIO is not set
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Freescale MXC Implementations
+#
+CONFIG_ARCH_MX3=y
+
+#
+# MX3 Options
+#
+# CONFIG_MACH_MX31ADS is not set
+CONFIG_MACH_MX31LITE=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+# CONFIG_PCMCIA is not set
+
+#
+# PC-card bridges
+#
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig
index 57f32f39d0ff..0884f2370c3a 100644
--- a/arch/arm/configs/netx_defconfig
+++ b/arch/arm/configs/netx_defconfig
@@ -154,7 +154,6 @@ CONFIG_ARM_AMBA=y
# Kernel Features
#
CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
index 650a248613e5..418ca2febbe3 100644
--- a/arch/arm/configs/onearm_defconfig
+++ b/arch/arm/configs/onearm_defconfig
@@ -202,7 +202,6 @@ CONFIG_AT91_CF=y
# Kernel Features
#
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 52cd99bd52fb..9578b5d9f9c7 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Feb 7 14:10:30 2008
+# Linux kernel version: 2.6.26-rc4
+# Mon Jun 2 23:54:48 2008
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -21,6 +21,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -40,24 +41,24 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -73,20 +74,25 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
+CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -111,7 +117,6 @@ CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
#
# System Type
@@ -160,6 +165,15 @@ CONFIG_MACH_RD88F5182=y
CONFIG_MACH_KUROBOX_PRO=y
CONFIG_MACH_DNS323=y
CONFIG_MACH_TS209=y
+CONFIG_MACH_LINKSTATION_PRO=y
+CONFIG_MACH_TS409=y
+CONFIG_MACH_WRT350N_V2=y
+CONFIG_MACH_TS78XX=y
+CONFIG_MACH_MV2120=y
+CONFIG_MACH_MSS2=y
+CONFIG_MACH_WNR854T=y
+CONFIG_MACH_RD88F5181L_GE=y
+CONFIG_MACH_RD88F5181L_FXO=y
#
# Boot options
@@ -168,6 +182,7 @@ CONFIG_MACH_TS209=y
#
# Power management
#
+CONFIG_PLAT_ORION=y
#
# Processor Type
@@ -177,8 +192,9 @@ CONFIG_CPU_FEROCEON=y
CONFIG_CPU_FEROCEON_OLD_ID=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_COPY_FEROCEON=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
@@ -189,7 +205,6 @@ CONFIG_CPU_CP15_MMU=y
CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_OUTER_CACHE is not set
#
@@ -199,6 +214,7 @@ CONFIG_PCI=y
CONFIG_PCI_SYSCALL=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
#
@@ -221,6 +237,7 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -238,7 +255,6 @@ CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE=""
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
-# CONFIG_ATAGS_PROC is not set
#
# Floating point emulation
@@ -311,8 +327,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -335,6 +349,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# Network testing
#
CONFIG_NET_PKTGEN=m
+# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
@@ -362,6 +377,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
@@ -371,6 +388,7 @@ CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -378,9 +396,8 @@ CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-CONFIG_NFTL=y
-# CONFIG_NFTL_RW is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
@@ -405,12 +422,12 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
-CONFIG_MTD_CFI_I4=y
+# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
+# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
@@ -481,6 +498,9 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
#
# SCSI device support
@@ -542,6 +562,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -556,7 +577,10 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
CONFIG_SATA_MV=y
@@ -566,7 +590,6 @@ CONFIG_SATA_MV=y
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
@@ -611,6 +634,7 @@ CONFIG_SATA_MV=y
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -652,7 +676,7 @@ CONFIG_NET_PCI=y
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
+# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
@@ -668,9 +692,7 @@ CONFIG_E100=y
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
-CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
@@ -680,27 +702,15 @@ CONFIG_E1000_NAPI=y
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
-CONFIG_SKGE=y
-CONFIG_SKY2=y
-# CONFIG_SK98LIN is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
-CONFIG_TIGON3=y
+# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
@@ -708,6 +718,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -738,12 +749,9 @@ CONFIG_INPUT=y
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
@@ -765,10 +773,8 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#
# Character devices
#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -777,7 +783,7 @@ CONFIG_HW_CONSOLE=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
+# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
@@ -792,7 +798,7 @@ CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -804,13 +810,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -837,6 +836,7 @@ CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
CONFIG_I2C_MV64XXX=y
#
@@ -847,19 +847,13 @@ CONFIG_I2C_MV64XXX=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -872,6 +866,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -901,6 +896,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
@@ -910,6 +906,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
@@ -925,14 +922,24 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
#
# Graphics support
@@ -949,12 +956,6 @@ CONFIG_DAB=y
# CONFIG_DISPLAY_SUPPORT is not set
#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
# Sound
#
# CONFIG_SOUND is not set
@@ -985,14 +986,18 @@ CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
@@ -1003,6 +1008,7 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1022,7 +1028,9 @@ CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1060,6 +1068,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
CONFIG_NEW_LEDS=y
@@ -1068,7 +1077,7 @@ CONFIG_LEDS_CLASS=y
#
# LED drivers
#
-# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_GPIO=y
#
# LED Triggers
@@ -1076,6 +1085,7 @@ CONFIG_LEDS_CLASS=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1105,6 +1115,7 @@ CONFIG_RTC_DRV_RS5C372=y
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
@@ -1125,6 +1136,7 @@ CONFIG_RTC_DRV_M41T80=y
#
# on-CPU RTC drivers
#
+# CONFIG_UIO is not set
#
# File systems
@@ -1140,14 +1152,11 @@ CONFIG_JBD=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1155,8 +1164,8 @@ CONFIG_DNOTIFY=y
#
# CD-ROM/DVD Filesystems
#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
@@ -1205,8 +1214,10 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1214,7 +1225,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1241,14 +1251,13 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_LDM_DEBUG=y
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
-CONFIG_SUN_PARTITION=y
+# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
@@ -1300,15 +1309,48 @@ CONFIG_NLS_ISO8859_2=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
#
# Security options
@@ -1317,50 +1359,79 @@ CONFIG_DEBUG_USER=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_BLKCIPHER=m
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1369,12 +1440,14 @@ CONFIG_CRYPTO_HW=y
# Library routines
#
CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=y
+# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
diff --git a/arch/arm/configs/pcm037_defconfig b/arch/arm/configs/pcm037_defconfig
new file mode 100644
index 000000000000..627474586470
--- /dev/null
+++ b/arch/arm/configs/pcm037_defconfig
@@ -0,0 +1,748 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc6
+# Wed Jun 25 11:52:42 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Freescale MXC Implementations
+#
+CONFIG_ARCH_MX3=y
+
+#
+# MX3 Options
+#
+# CONFIG_MACH_MX31ADS is not set
+CONFIG_MACH_PCM037=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+# CONFIG_MTD_CFI_NOSWAP is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/pcm038_defconfig b/arch/arm/configs/pcm038_defconfig
new file mode 100644
index 000000000000..6b798c215ca8
--- /dev/null
+++ b/arch/arm/configs/pcm038_defconfig
@@ -0,0 +1,1008 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc6
+# Fri Jun 20 16:38:36 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_MARKERS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Freescale MXC Implementations
+#
+CONFIG_ARCH_MX2=y
+# CONFIG_ARCH_MX3 is not set
+
+#
+# MX2 family CPU support
+#
+CONFIG_MACH_MX27=y
+
+#
+# MX2 Platforms
+#
+# CONFIG_MACH_MX27ADS is not set
+CONFIG_MACH_PCM038=y
+CONFIG_MACH_PCM970_BASEBOARD=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FEC_OLD=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig
index 95a22f512805..14826f0dabde 100644
--- a/arch/arm/configs/picotux200_defconfig
+++ b/arch/arm/configs/picotux200_defconfig
@@ -201,7 +201,6 @@ CONFIG_ARM_THUMB=y
# Kernel Features
#
# CONFIG_PREEMPT is not set
-CONFIG_NO_IDLE_HZ=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig
index b5e11aa2e290..811b8f60d19d 100644
--- a/arch/arm/configs/pnx4008_defconfig
+++ b/arch/arm/configs/pnx4008_defconfig
@@ -151,7 +151,6 @@ CONFIG_ARM_THUMB=y
# Kernel Features
#
CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
new file mode 100644
index 000000000000..ef903bed061e
--- /dev/null
+++ b/arch/arm/configs/qil-a9260_defconfig
@@ -0,0 +1,1256 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Tue Apr 15 12:28:38 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9260 Variants
+#
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
+#
+# AT91SAM9260 / AT91SAM9XE Board Type
+#
+# CONFIG_MACH_AT91SAM9260EK is not set
+# CONFIG_MACH_CAM60 is not set
+# CONFIG_MACH_SAM9_L9260 is not set
+# CONFIG_MACH_USB_A9260 is not set
+CONFIG_MACH_QIL_A9260=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AT91_TIMER_HZ=100
+# CONFIG_AT91_EARLY_DBGU is not set
+CONFIG_AT91_EARLY_USART0=y
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS1,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_AT91_ECC_SOFT=y
+# CONFIG_MTD_NAND_AT91_ECC_HW is not set
+# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_AT91SAM9_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_AT91=y
+# CONFIG_MMC_SPI is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+CONFIG_RTC_DRV_M41T94=y
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig
index fc39ba1a89f3..0c09b23167ec 100644
--- a/arch/arm/configs/realview-smp_defconfig
+++ b/arch/arm/configs/realview-smp_defconfig
@@ -177,7 +177,6 @@ CONFIG_NR_CPUS=4
CONFIG_HOTPLUG_CPU=y
CONFIG_LOCAL_TIMERS=y
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index accbf529ce5b..907e54344dad 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -126,7 +126,6 @@ CONFIG_ISA_DMA_API=y
#
# Kernel Features
#
-# CONFIG_NO_IDLE_HZ is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig
index 5ddecb9ddf01..f62d1817d2c6 100644
--- a/arch/arm/configs/rpc_defconfig
+++ b/arch/arm/configs/rpc_defconfig
@@ -190,7 +190,6 @@ CONFIG_ISA_DMA_API=y
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index f8a1645b3d4a..35faaea8623e 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,15 +1,18 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc6
-# Mon Apr 9 10:12:58 2007
+# Linux kernel version: 2.6.26-rc8
+# Mon Jul 7 16:59:23 2008
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
CONFIG_MMU=y
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
@@ -18,34 +21,39 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=m
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -53,6 +61,7 @@ CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -60,34 +69,43 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
@@ -101,6 +119,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# System Type
@@ -119,14 +138,17 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
@@ -134,18 +156,32 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_ARCH_S3C2410=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
CONFIG_PLAT_S3C24XX=y
CONFIG_CPU_S3C244X=y
+# CONFIG_S3C24XX_PWM is not set
CONFIG_PM_SIMTEC=y
+CONFIG_S3C2410_DMA=y
+# CONFIG_S3C2410_DMA_DEBUG is not set
+CONFIG_MACH_SMDK=y
+CONFIG_PLAT_S3C=y
+CONFIG_CPU_LLSERIAL_S3C2410=y
+CONFIG_CPU_LLSERIAL_S3C2440=y
+
+#
+# Boot options
+#
# CONFIG_S3C_BOOT_WATCHDOG is not set
# CONFIG_S3C_BOOT_ERROR_RESET is not set
+
+#
+# Power management
+#
# CONFIG_S3C2410_PM_DEBUG is not set
# CONFIG_S3C2410_PM_CHECK is not set
CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
-CONFIG_MACH_SMDK=y
#
# S3C2400 Machines
@@ -155,6 +191,8 @@ CONFIG_CPU_S3C2410_DMA=y
CONFIG_S3C2410_PM=y
CONFIG_S3C2410_GPIO=y
CONFIG_S3C2410_CLOCK=y
+CONFIG_SIMTEC_NOR=y
+CONFIG_MACH_BAST_IDE=y
#
# S3C2410 Machines
@@ -167,6 +205,7 @@ CONFIG_ARCH_BAST=y
CONFIG_MACH_OTOM=y
CONFIG_MACH_AML_M5900=y
CONFIG_BAST_PC104_IRQ=y
+# CONFIG_MACH_TCT_HAMMER is not set
CONFIG_MACH_VR1000=y
CONFIG_MACH_QT2410=y
CONFIG_CPU_S3C2412=y
@@ -176,8 +215,10 @@ CONFIG_S3C2412_PM=y
#
# S3C2412 Machines
#
+# CONFIG_MACH_JIVE is not set
CONFIG_MACH_SMDK2413=y
CONFIG_MACH_S3C2413=y
+# CONFIG_MACH_SMDK2412 is not set
CONFIG_MACH_VSTMS=y
CONFIG_CPU_S3C2440=y
CONFIG_S3C2440_DMA=y
@@ -191,6 +232,7 @@ CONFIG_MACH_RX3715=y
CONFIG_ARCH_S3C2440=y
CONFIG_MACH_NEXCODER_2440=y
CONFIG_SMDK2440_CPU2440=y
+# CONFIG_MACH_AT2440EVB is not set
CONFIG_CPU_S3C2442=y
#
@@ -215,6 +257,7 @@ CONFIG_CPU_32v4T=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV4T=y
CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
@@ -236,17 +279,15 @@ CONFIG_CPU_CP15_MMU=y
# Bus support
#
CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
+# CONFIG_TICK_ONESHOT is not set
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=200
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
@@ -257,9 +298,13 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -279,7 +324,7 @@ CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
+CONFIG_FPE_NWFPE_XP=y
# CONFIG_FPE_FASTFPE is not set
# CONFIG_VFP is not set
@@ -295,10 +340,12 @@ CONFIG_BINFMT_AOUT=y
# Power management options
#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-# CONFIG_APM_EMULATION is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=m
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
#
# Networking
@@ -308,59 +355,67 @@ CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
-# CONFIG_PACKET is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+# CONFIG_IPV6_ROUTE_INFO is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -373,20 +428,71 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
+CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
+
+#
+# Selecting 'y' for an algorithm will
+#
+
+#
+# build the algorithm into mac80211.
+#
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
+# CONFIG_MAC80211_DEBUG is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -395,21 +501,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
@@ -420,6 +519,7 @@ CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -432,6 +532,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -457,7 +558,6 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
CONFIG_MTD_ROM=y
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -486,13 +586,10 @@ CONFIG_MTD_BAST_MAXSIZE=4
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_S3C2410=y
# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
@@ -500,30 +597,25 @@ CONFIG_MTD_NAND_S3C2410=y
# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
-# Parallel port support
+# UBI - Unsorted block images
#
+# CONFIG_MTD_UBI is not set
CONFIG_PARPORT=y
-# CONFIG_PARPORT_PC is not set
+CONFIG_PARPORT_PC=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
+CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
+CONFIG_PARPORT_NOT_PC=y
# CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
+# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -532,34 +624,34 @@ CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDE_BAST=y
-# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_BLK_DEV_HD is not set
@@ -567,101 +659,119 @@ CONFIG_BLK_DEV_IDE_BAST=y
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_PPA is not set
+# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_DEBUG is not set
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+CONFIG_HAVE_PATA_PLATFORM=y
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
CONFIG_DM9000=y
+# CONFIG_ENC28J60 is not set
+CONFIG_DM9000_DEBUGLEVEL=4
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
-# Wan interfaces
+# USB Network Adapters
#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
#
@@ -669,6 +779,7 @@ CONFIG_DM9000=y
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -678,7 +789,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -695,12 +805,21 @@ CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_GPIO is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -721,6 +840,7 @@ CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
@@ -728,8 +848,6 @@ CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_MOXA_SMARTIO_NEW is not set
-# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
@@ -758,8 +876,12 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
#
# Non-8250 serial port support
#
+CONFIG_SERIAL_SAMSUNG=y
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_S3C2410=y
-CONFIG_SERIAL_S3C2410_CONSOLE=y
+CONFIG_SERIAL_S3C2412=y
+CONFIG_SERIAL_S3C2440=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
@@ -768,89 +890,50 @@ CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=y
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_S3C2410_WATCHDOG=y
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
+CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_S3C2410=y
+CONFIG_I2C_SIMTEC=y
+# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@@ -860,6 +943,7 @@ CONFIG_SPI_MASTER=y
#
CONFIG_SPI_BITBANG=m
# CONFIG_SPI_BUTTERFLY is not set
+# CONFIG_SPI_LM70_LLP is not set
CONFIG_SPI_S3C24XX=m
CONFIG_SPI_S3C24XX_GPIO=m
@@ -867,30 +951,43 @@ CONFIG_SPI_S3C24XX_GPIO=m
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
#
-# Dallas's 1-wire bus
+# GPIO Support
#
-# CONFIG_W1 is not set
+# CONFIG_DEBUG_GPIO is not set
#
-# Hardware Monitoring support
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -905,72 +1002,95 @@ CONFIG_SENSORS_LM85=m
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
#
-# Misc devices
+# Watchdog Device Drivers
#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_S3C2410_WATCHDOG=y
#
-# Multifunction device drivers
+# ISA-based Watchdog Cards
#
-# CONFIG_MFD_SM501 is not set
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
#
-# LED devices
+# USB-based Watchdog Cards
#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
+# CONFIG_USBPCWATCHDOG is not set
#
-# LED drivers
+# Sonics Silicon Backplane
#
-CONFIG_LEDS_S3C24XX=m
-CONFIG_LEDS_H1940=m
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# LED Triggers
+# Multifunction device drivers
#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_MFD_SM501=y
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia drivers
#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -978,12 +1098,19 @@ CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
-# Frambuffer hardware drivers
+# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_S3C2410=y
# CONFIG_FB_S3C2410_DEBUG is not set
+CONFIG_FB_SM501=y
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@@ -992,40 +1119,45 @@ CONFIG_FB_S3C2410=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
# CONFIG_LOGO is not set
#
# Sound
#
# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
-# HID Devices
+# USB Input Devices
#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
+# CONFIG_USB_HID is not set
#
-# USB support
+# USB HID Boot Protocol drivers
#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
@@ -1033,18 +1165,22 @@ CONFIG_USB_DEVICEFS=y
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1053,57 +1189,78 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
#
# may also be needed; see USB_STORAGE Help for more information
#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
+CONFIG_USB_SERIAL=y
+# CONFIG_USB_SERIAL_CONSOLE is not set
+# CONFIG_USB_EZUSB is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+CONFIG_USB_SERIAL_FTDI_SIO=y
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+CONFIG_USB_SERIAL_OPTION=m
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
@@ -1116,35 +1273,38 @@ CONFIG_USB_MON=y
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
+CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
+CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
#
-# MMC/SD Card support
+# LED drivers
#
-# CONFIG_MMC is not set
+CONFIG_LEDS_S3C24XX=m
+CONFIG_LEDS_H1940=m
+# CONFIG_LEDS_GPIO is not set
#
-# Real Time Clock
+# LED Triggers
#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1158,61 +1318,86 @@ CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# RTC drivers
+# I2C RTC drivers
#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-CONFIG_RTC_DRV_S3C=y
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_S3C=y
+# CONFIG_UIO is not set
+
+#
# File systems
#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
@@ -1222,7 +1407,9 @@ CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
@@ -1230,10 +1417,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
@@ -1248,31 +1435,32 @@ CONFIG_RAMFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1280,7 +1468,6 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1302,94 +1489,93 @@ CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
CONFIG_DEBUG_S3C_PORT=y
@@ -1400,21 +1586,100 @@ CONFIG_DEBUG_S3C_UART=0
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
#
-# Cryptographic options
+# Compression
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig
index 484dc9739dfc..8688362bcf7b 100644
--- a/arch/arm/configs/sam9_l9260_defconfig
+++ b/arch/arm/configs/sam9_l9260_defconfig
@@ -211,7 +211,6 @@ CONFIG_ARM_THUMB=y
#
# CONFIG_TICK_ONESHOT is not set
CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index aa7a01179500..7d59fb1f1cea 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -164,7 +164,6 @@ CONFIG_PCMCIA_PXA2XX=y
# Kernel Features
#
CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index 576b8339f0d6..07dfb98df4f0 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -247,7 +247,6 @@ CONFIG_ARM_THUMB=y
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=200
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index 6db6392806f9..8b7a431a8bfc 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -195,7 +195,6 @@ CONFIG_PCMCIA_PXA2XX=y
# Kernel Features
#
CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig
new file mode 100644
index 000000000000..3680bd2df26d
--- /dev/null
+++ b/arch/arm/configs/usb-a9260_defconfig
@@ -0,0 +1,1142 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Tue Apr 15 11:39:35 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9260 Variants
+#
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
+#
+# AT91SAM9260 / AT91SAM9XE Board Type
+#
+# CONFIG_MACH_AT91SAM9260EK is not set
+# CONFIG_MACH_CAM60 is not set
+# CONFIG_MACH_SAM9_L9260 is not set
+CONFIG_MACH_USB_A9260=y
+# CONFIG_MACH_QIL_A9260 is not set
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_AT91_ECC_SOFT=y
+# CONFIG_MTD_NAND_AT91_ECC_HW is not set
+# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig
new file mode 100644
index 000000000000..48d455bc7363
--- /dev/null
+++ b/arch/arm/configs/usb-a9263_defconfig
@@ -0,0 +1,1134 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Tue Apr 15 11:15:19 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+CONFIG_ARCH_AT91SAM9263=y
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9263 Board Type
+#
+# CONFIG_MACH_AT91SAM9263EK is not set
+CONFIG_MACH_USB_A9263=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_AT91_ECC_SOFT=y
+# CONFIG_MTD_NAND_AT91_ECC_HW is not set
+# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index 48dca69addae..8355f88f7292 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -151,7 +151,6 @@ CONFIG_ARM_AMBA=y
# Kernel Features
#
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/cm_x270_defconfig b/arch/arm/configs/xm_x270_defconfig
index 5cab08397ae7..aa40d91ce599 100644
--- a/arch/arm/configs/cm_x270_defconfig
+++ b/arch/arm/configs/xm_x270_defconfig
@@ -1,13 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22
-# Wed Jul 18 14:11:48 2007
+# Linux kernel version: 2.6.25
+# Sun May 11 15:12:52 2008
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
-# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
@@ -21,21 +21,18 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
@@ -44,13 +41,20 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -58,6 +62,7 @@ CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -65,24 +70,34 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
@@ -99,11 +114,12 @@ CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# System Type
@@ -131,6 +147,8 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_RPC is not set
@@ -140,19 +158,41 @@ CONFIG_ARCH_PXA=y
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
CONFIG_DMABOUNCE=y
#
-# Intel PXA2xx Implementations
+# Intel PXA2xx/PXA3xx Implementations
#
+
+#
+# Select target boards
+#
+# CONFIG_ARCH_GUMSTIX is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
# CONFIG_ARCH_PXA_IDP is not set
# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
# CONFIG_MACH_TRIZEPS4 is not set
+CONFIG_MACH_EM_X270=y
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
CONFIG_MACH_ARMCORE=y
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
CONFIG_PXA27x=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
#
# Processor Type
@@ -161,6 +201,7 @@ CONFIG_CPU_32=y
CONFIG_CPU_XSCALE=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
@@ -182,21 +223,40 @@ CONFIG_PCI=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCI_HOST_ITE8152=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
#
-# PCCARD (PCMCIA/CardBus) support
+# PC-card bridges
#
-# CONFIG_PCCARD is not set
+CONFIG_YENTA=m
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+CONFIG_YENTA_TI=y
+# CONFIG_YENTA_ENE_TUNE is not set
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCMCIA_PXA2XX=m
+CONFIG_PCCARD_NONSTATIC=m
#
# Kernel Features
#
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
-# CONFIG_AEABI is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@@ -205,6 +265,8 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -217,11 +279,16 @@ CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="root=1f03 mem=32M"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
# Floating point emulation
#
@@ -238,16 +305,17 @@ CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
#
# Power management options
#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-# CONFIG_APM_EMULATION is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=m
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
#
# Networking
@@ -258,15 +326,16 @@ CONFIG_NET=y
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
@@ -275,6 +344,7 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
@@ -285,15 +355,13 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -310,10 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -321,8 +385,33 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+# CONFIG_BT_RFCOMM_TTY is not set
+CONFIG_BT_BNEP=m
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
#
@@ -331,12 +420,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_IEEE80211_SOFTMAC is not set
+# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -347,38 +431,47 @@ CONFIG_IEEE80211_CRYPT_CCMP=m
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-CONFIG_MTD=m
+CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -389,15 +482,29 @@ CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x400000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -415,18 +522,19 @@ CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_SHARPSL is not set
# CONFIG_MTD_NAND_CAFE is not set
-CONFIG_MTD_NAND_CM_X270=m
+CONFIG_MTD_NAND_CM_X270=y
# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
@@ -447,36 +555,13 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=12000
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-CONFIG_IDE=m
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
#
# SCSI device support
@@ -486,7 +571,7 @@ CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_PROC_FS is not set
+CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
@@ -513,12 +598,9 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
@@ -529,6 +611,7 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
@@ -539,8 +622,10 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
@@ -550,16 +635,69 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
-# CONFIG_ATA is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+CONFIG_PATA_PCMCIA=m
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -574,6 +712,7 @@ CONFIG_NETDEVICES=y
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
@@ -585,64 +724,65 @@ CONFIG_MII=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=1
# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
-CONFIG_8139TOO=m
+CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_MLX4_CORE is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_USB is not set
+# CONFIG_LIBERTAS_CS is not set
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
#
# USB Network Adapters
@@ -651,15 +791,24 @@ CONFIG_NETDEV_10000=y
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
+CONFIG_SLHC=m
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -675,20 +824,32 @@ CONFIG_INPUT=y
#
# Userland interfaces
#
-# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
#
# Input Device Drivers
#
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=m
+# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
@@ -697,13 +858,22 @@ CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+CONFIG_TOUCHSCREEN_WM9712=y
+# CONFIG_TOUCHSCREEN_WM9713 is not set
+# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
@@ -713,7 +883,9 @@ CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -730,83 +902,141 @@ CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_HAVE_GPIO_LIB=y
#
-# SPI support
+# GPIO Support
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
+# CONFIG_DEBUG_GPIO is not set
#
-# Multifunction device drivers
+# I2C GPIO expanders:
#
-# CONFIG_MFD_SM501 is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
#
-# LED devices
+# SPI GPIO expanders:
#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
#
-# LED drivers
+# Sonics Silicon Backplane
#
-CONFIG_LEDS_CM_X270=y
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# LED Triggers
+# Multifunction device drivers
#
-CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
#
-# Graphics support
+# Multimedia drivers
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
#
-# Display device support
+# Graphics support
#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
@@ -842,9 +1072,17 @@ CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
CONFIG_FB_MBX=m
+# CONFIG_FB_AM200EPD is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@@ -904,10 +1142,12 @@ CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
@@ -932,6 +1172,7 @@ CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
@@ -949,6 +1190,7 @@ CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
@@ -966,18 +1208,33 @@ CONFIG_SND_PXA2XX_AC97=m
# CONFIG_SND_USB_CAIAQ is not set
#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
+
+#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
@@ -992,6 +1249,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -1000,8 +1258,9 @@ CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
@@ -1033,13 +1292,16 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1052,10 +1314,6 @@ CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -1080,14 +1338,6 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
@@ -1098,6 +1348,7 @@ CONFIG_MMC=m
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
#
# MMC/SD Host Controller Drivers
@@ -1105,10 +1356,22 @@ CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_MMC_PXA=m
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_TIFM_SD is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
#
-# Real Time Clock
+# LED drivers
#
+# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_CM_X270=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1125,11 +1388,32 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_TEST is not set
#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+
+#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_V3020=y
@@ -1138,19 +1422,7 @@ CONFIG_RTC_DRV_V3020=y
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SA1100=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_UIO is not set
#
# File systems
@@ -1164,20 +1436,16 @@ CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1191,9 +1459,9 @@ CONFIG_DNOTIFY=y
#
# DOS/FAT/NT Filesystems
#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
@@ -1207,7 +1475,6 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -1220,22 +1487,30 @@ CONFIG_RAMFS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1245,9 +1520,13 @@ CONFIG_SUNRPC=y
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
@@ -1255,15 +1534,27 @@ CONFIG_SMB_FS=y
#
# Partition Types
#
-# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
@@ -1287,7 +1578,7 @@ CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
@@ -1300,53 +1591,52 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
+CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_FRAME_WARN=0
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
-CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
@@ -1355,55 +1645,96 @@ CONFIG_DEBUG_LL=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/kernel/atags.c b/arch/arm/kernel/atags.c
index 64c420805e6f..42a1a1415fa6 100644
--- a/arch/arm/kernel/atags.c
+++ b/arch/arm/kernel/atags.c
@@ -1,5 +1,4 @@
#include <linux/slab.h>
-#include <linux/kexec.h>
#include <linux/proc_fs.h>
#include <asm/setup.h>
#include <asm/types.h>
@@ -7,9 +6,8 @@
struct buffer {
size_t size;
- char *data;
+ char data[];
};
-static struct buffer tags_buffer;
static int
read_buffer(char* page, char** start, off_t off, int count,
@@ -29,58 +27,57 @@ read_buffer(char* page, char** start, off_t off, int count,
return count;
}
-
-static int
-create_proc_entries(void)
-{
- struct proc_dir_entry* tags_entry;
-
- tags_entry = create_proc_read_entry("atags", 0400, NULL, read_buffer, &tags_buffer);
- if (!tags_entry)
- return -ENOMEM;
-
- return 0;
-}
-
-
-static char __initdata atags_copy_buf[KEXEC_BOOT_PARAMS_SIZE];
-static char __initdata *atags_copy;
+#define BOOT_PARAMS_SIZE 1536
+static char __initdata atags_copy[BOOT_PARAMS_SIZE];
void __init save_atags(const struct tag *tags)
{
- atags_copy = atags_copy_buf;
- memcpy(atags_copy, tags, KEXEC_BOOT_PARAMS_SIZE);
+ memcpy(atags_copy, tags, sizeof(atags_copy));
}
-
static int __init init_atags_procfs(void)
{
- struct tag *tag;
- int error;
+ /*
+ * This cannot go into save_atags() because kmalloc and proc don't work
+ * yet when it is called.
+ */
+ struct proc_dir_entry *tags_entry;
+ struct tag *tag = (struct tag *)atags_copy;
+ struct buffer *b;
+ size_t size;
- if (!atags_copy) {
- printk(KERN_WARNING "Exporting ATAGs: No saved tags found\n");
- return -EIO;
+ if (tag->hdr.tag != ATAG_CORE) {
+ printk(KERN_INFO "No ATAGs?");
+ return -EINVAL;
}
- for (tag = (struct tag *) atags_copy; tag->hdr.size; tag = tag_next(tag))
+ for (; tag->hdr.size; tag = tag_next(tag))
;
- tags_buffer.size = ((char *) tag - atags_copy) + sizeof(tag->hdr);
- tags_buffer.data = kmalloc(tags_buffer.size, GFP_KERNEL);
- if (tags_buffer.data == NULL)
- return -ENOMEM;
- memcpy(tags_buffer.data, atags_copy, tags_buffer.size);
-
- error = create_proc_entries();
- if (error) {
- printk(KERN_ERR "Exporting ATAGs: not enough memory\n");
- kfree(tags_buffer.data);
- tags_buffer.size = 0;
- tags_buffer.data = NULL;
- }
+ /* include the terminating ATAG_NONE */
+ size = (char *)tag - atags_copy + sizeof(struct tag_header);
- return error;
-}
+ WARN_ON(tag->hdr.tag != ATAG_NONE);
+
+ b = kmalloc(sizeof(*b) + size, GFP_KERNEL);
+ if (!b)
+ goto nomem;
+ b->size = size;
+ memcpy(b->data, atags_copy, size);
+
+ tags_entry = create_proc_read_entry("atags", 0400,
+ NULL, read_buffer, b);
+
+ if (!tags_entry)
+ goto nomem;
+
+ return 0;
+
+nomem:
+ kfree(b);
+ printk(KERN_ERR "Exporting ATAGs: not enough memory\n");
+
+ return -ENOMEM;
+}
arch_initcall(init_atags_procfs);
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index a53c0aba5c14..8bfd299bfe77 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -680,7 +680,7 @@ static int __init ecard_probeirqhw(void)
#define IO_EC_MEMC8_BASE 0
#endif
-unsigned int __ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
+static unsigned int __ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
{
unsigned long address = 0;
int slot = ec->slot_no;
@@ -1002,7 +1002,7 @@ ecard_probe(int slot, card_type_t type)
}
rc = -ENODEV;
- if ((ec->podaddr = ecard_address(ec, type, ECARD_SYNC)) == 0)
+ if ((ec->podaddr = __ecard_address(ec, type, ECARD_SYNC)) == 0)
goto nodev;
cid.r_zero = 1;
@@ -1141,10 +1141,10 @@ static int ecard_drv_probe(struct device *dev)
id = ecard_match_device(drv->id_table, ec);
- ecard_claim(ec);
+ ec->claimed = 1;
ret = drv->probe(ec, id);
if (ret)
- ecard_release(ec);
+ ec->claimed = 0;
return ret;
}
@@ -1154,7 +1154,7 @@ static int ecard_drv_remove(struct device *dev)
struct ecard_driver *drv = ECARD_DRV(dev->driver);
drv->remove(ec);
- ecard_release(ec);
+ ec->claimed = 0;
/*
* Restore the default operations. We ensure that the
@@ -1182,7 +1182,7 @@ static void ecard_drv_shutdown(struct device *dev)
if (dev->driver) {
if (drv->shutdown)
drv->shutdown(ec);
- ecard_release(ec);
+ ec->claimed = 0;
}
/*
@@ -1239,7 +1239,6 @@ static int ecard_bus_init(void)
postcore_initcall(ecard_bus_init);
EXPORT_SYMBOL(ecard_readchunk);
-EXPORT_SYMBOL(__ecard_address);
EXPORT_SYMBOL(ecard_register_driver);
EXPORT_SYMBOL(ecard_remove_driver);
EXPORT_SYMBOL(ecard_bus_type);
diff --git a/arch/arm/kernel/ecard.h b/arch/arm/kernel/ecard.h
index d7c2dacf935d..4642d436be2a 100644
--- a/arch/arm/kernel/ecard.h
+++ b/arch/arm/kernel/ecard.h
@@ -54,3 +54,16 @@ struct ex_chunk_dir {
#define c_len(x) ((x)->r_len[0]|((x)->r_len[1]<<8)|((x)->r_len[2]<<16))
#define c_start(x) ((x)->r_start)
};
+
+typedef enum ecard_type { /* Cards address space */
+ ECARD_IOC,
+ ECARD_MEMC,
+ ECARD_EASI
+} card_type_t;
+
+typedef enum { /* Speed for ECARD_IOC space */
+ ECARD_SLOW = 0,
+ ECARD_MEDIUM = 1,
+ ECARD_FAST = 2,
+ ECARD_SYNC = 3
+} card_speed_t;
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 46bf2ede6128..199b3680118b 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -133,10 +133,8 @@ static void default_idle(void)
cpu_relax();
else {
local_irq_disable();
- if (!need_resched()) {
- timer_dyn_reprogram();
+ if (!need_resched())
arch_idle();
- }
local_irq_enable();
}
}
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index ae31deb2d065..90e0c35ae60d 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -36,6 +36,7 @@ EXPORT_SYMBOL(walk_stackframe);
#ifdef CONFIG_STACKTRACE
struct stack_trace_data {
struct stack_trace *trace;
+ unsigned int no_sched_functions;
unsigned int skip;
};
@@ -43,27 +44,52 @@ static int save_trace(struct stackframe *frame, void *d)
{
struct stack_trace_data *data = d;
struct stack_trace *trace = data->trace;
+ unsigned long addr = frame->lr;
+ if (data->no_sched_functions && in_sched_functions(addr))
+ return 0;
if (data->skip) {
data->skip--;
return 0;
}
- trace->entries[trace->nr_entries++] = frame->lr;
+ trace->entries[trace->nr_entries++] = addr;
return trace->nr_entries >= trace->max_entries;
}
-void save_stack_trace(struct stack_trace *trace)
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
{
struct stack_trace_data data;
unsigned long fp, base;
data.trace = trace;
data.skip = trace->skip;
- base = (unsigned long)task_stack_page(current);
- asm("mov %0, fp" : "=r" (fp));
+ base = (unsigned long)task_stack_page(tsk);
+
+ if (tsk != current) {
+#ifdef CONFIG_SMP
+ /*
+ * What guarantees do we have here that 'tsk'
+ * is not running on another CPU?
+ */
+ BUG();
+#else
+ data.no_sched_functions = 1;
+ fp = thread_saved_fp(tsk);
+#endif
+ } else {
+ data.no_sched_functions = 0;
+ asm("mov %0, fp" : "=r" (fp));
+ }
walk_stackframe(fp, base, base + THREAD_SIZE, save_trace, &data);
+ if (trace->nr_entries < trace->max_entries)
+ trace->entries[trace->nr_entries++] = ULONG_MAX;
+}
+
+void save_stack_trace(struct stack_trace *trace)
+{
+ save_stack_trace_tsk(current, trace);
}
#endif
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index b5867eca1d0b..cc5145b28e7f 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -365,108 +365,6 @@ static struct sysdev_class timer_sysclass = {
.resume = timer_resume,
};
-#ifdef CONFIG_NO_IDLE_HZ
-static int timer_dyn_tick_enable(void)
-{
- struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
- unsigned long flags;
- int ret = -ENODEV;
-
- if (dyn_tick) {
- spin_lock_irqsave(&dyn_tick->lock, flags);
- ret = 0;
- if (!(dyn_tick->state & DYN_TICK_ENABLED)) {
- ret = dyn_tick->enable();
-
- if (ret == 0)
- dyn_tick->state |= DYN_TICK_ENABLED;
- }
- spin_unlock_irqrestore(&dyn_tick->lock, flags);
- }
-
- return ret;
-}
-
-static int timer_dyn_tick_disable(void)
-{
- struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
- unsigned long flags;
- int ret = -ENODEV;
-
- if (dyn_tick) {
- spin_lock_irqsave(&dyn_tick->lock, flags);
- ret = 0;
- if (dyn_tick->state & DYN_TICK_ENABLED) {
- ret = dyn_tick->disable();
-
- if (ret == 0)
- dyn_tick->state &= ~DYN_TICK_ENABLED;
- }
- spin_unlock_irqrestore(&dyn_tick->lock, flags);
- }
-
- return ret;
-}
-
-/*
- * Reprogram the system timer for at least the calculated time interval.
- * This function should be called from the idle thread with IRQs disabled,
- * immediately before sleeping.
- */
-void timer_dyn_reprogram(void)
-{
- struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
- unsigned long next, seq, flags;
-
- if (!dyn_tick)
- return;
-
- spin_lock_irqsave(&dyn_tick->lock, flags);
- if (dyn_tick->state & DYN_TICK_ENABLED) {
- next = next_timer_interrupt();
- do {
- seq = read_seqbegin(&xtime_lock);
- dyn_tick->reprogram(next - jiffies);
- } while (read_seqretry(&xtime_lock, seq));
- }
- spin_unlock_irqrestore(&dyn_tick->lock, flags);
-}
-
-static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf)
-{
- return sprintf(buf, "%i\n",
- (system_timer->dyn_tick->state & DYN_TICK_ENABLED) >> 1);
-}
-
-static ssize_t timer_set_dyn_tick(struct sys_device *dev, const char *buf,
- size_t count)
-{
- unsigned int enable = simple_strtoul(buf, NULL, 2);
-
- if (enable)
- timer_dyn_tick_enable();
- else
- timer_dyn_tick_disable();
-
- return count;
-}
-static SYSDEV_ATTR(dyn_tick, 0644, timer_show_dyn_tick, timer_set_dyn_tick);
-
-/*
- * dyntick=enable|disable
- */
-static char dyntick_str[4] __initdata = "";
-
-static int __init dyntick_setup(char *str)
-{
- if (str)
- strlcpy(dyntick_str, str, sizeof(dyntick_str));
- return 1;
-}
-
-__setup("dyntick=", dyntick_setup);
-#endif
-
static int __init timer_init_sysfs(void)
{
int ret = sysdev_class_register(&timer_sysclass);
@@ -475,19 +373,6 @@ static int __init timer_init_sysfs(void)
ret = sysdev_register(&system_timer->dev);
}
-#ifdef CONFIG_NO_IDLE_HZ
- if (ret == 0 && system_timer->dyn_tick) {
- ret = sysdev_create_file(&system_timer->dev, &attr_dyn_tick);
-
- /*
- * Turn on dynamic tick after calibrate delay
- * for correct bogomips
- */
- if (ret == 0 && dyntick_str[0] == 'e')
- ret = timer_dyn_tick_enable();
- }
-#endif
-
return ret;
}
@@ -500,10 +385,5 @@ void __init time_init(void)
system_timer->offset = dummy_gettimeoffset;
#endif
system_timer->init();
-
-#ifdef CONFIG_NO_IDLE_HZ
- if (system_timer->dyn_tick)
- spin_lock_init(&system_timer->dyn_tick->lock);
-#endif
}
diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S
index cab355c0c1f7..139cce646055 100644
--- a/arch/arm/lib/copy_template.S
+++ b/arch/arm/lib/copy_template.S
@@ -13,14 +13,6 @@
*/
/*
- * This can be used to enable code to cacheline align the source pointer.
- * Experiments on tested architectures (StrongARM and XScale) didn't show
- * this a worthwhile thing to do. That might be different in the future.
- */
-//#define CALGN(code...) code
-#define CALGN(code...)
-
-/*
* Theory of operation
* -------------------
*
@@ -82,7 +74,7 @@
stmfd sp!, {r5 - r8}
blt 5f
- CALGN( ands ip, r1, #31 )
+ CALGN( ands ip, r0, #31 )
CALGN( rsb r3, ip, #32 )
CALGN( sbcnes r4, r3, r2 ) @ C is always set here
CALGN( bcs 2f )
@@ -168,7 +160,7 @@
subs r2, r2, #28
blt 14f
- CALGN( ands ip, r1, #31 )
+ CALGN( ands ip, r0, #31 )
CALGN( rsb ip, ip, #32 )
CALGN( sbcnes r4, ip, r2 ) @ C is always set here
CALGN( subcc r2, r2, ip )
diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S
index ef7fddc14ac9..2e301b7bd8f1 100644
--- a/arch/arm/lib/memmove.S
+++ b/arch/arm/lib/memmove.S
@@ -13,14 +13,6 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-/*
- * This can be used to enable code to cacheline align the source pointer.
- * Experiments on tested architectures (StrongARM and XScale) didn't show
- * this a worthwhile thing to do. That might be different in the future.
- */
-//#define CALGN(code...) code
-#define CALGN(code...)
-
.text
/*
@@ -55,11 +47,12 @@ ENTRY(memmove)
stmfd sp!, {r5 - r8}
blt 5f
- CALGN( ands ip, r1, #31 )
+ CALGN( ands ip, r0, #31 )
CALGN( sbcnes r4, ip, r2 ) @ C is always set here
CALGN( bcs 2f )
CALGN( adr r4, 6f )
CALGN( subs r2, r2, ip ) @ C is set here
+ CALGN( rsb ip, ip, #32 )
CALGN( add pc, r4, ip )
PLD( pld [r1, #-4] )
@@ -138,8 +131,7 @@ ENTRY(memmove)
subs r2, r2, #28
blt 14f
- CALGN( ands ip, r1, #31 )
- CALGN( rsb ip, ip, #32 )
+ CALGN( ands ip, r0, #31 )
CALGN( sbcnes r4, ip, r2 ) @ C is always set here
CALGN( subcc r2, r2, ip )
CALGN( bcc 15f )
diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S
index 95b110b07a89..b477d4ac88ef 100644
--- a/arch/arm/lib/memset.S
+++ b/arch/arm/lib/memset.S
@@ -39,6 +39,9 @@ ENTRY(memset)
mov r3, r1
cmp r2, #16
blt 4f
+
+#if ! CALGN(1)+0
+
/*
* We need an extra register for this loop - save the return address and
* use the LR
@@ -64,6 +67,49 @@ ENTRY(memset)
stmneia r0!, {r1, r3, ip, lr}
ldr lr, [sp], #4
+#else
+
+/*
+ * This version aligns the destination pointer in order to write
+ * whole cache lines at once.
+ */
+
+ stmfd sp!, {r4-r7, lr}
+ mov r4, r1
+ mov r5, r1
+ mov r6, r1
+ mov r7, r1
+ mov ip, r1
+ mov lr, r1
+
+ cmp r2, #96
+ tstgt r0, #31
+ ble 3f
+
+ and ip, r0, #31
+ rsb ip, ip, #32
+ sub r2, r2, ip
+ movs ip, ip, lsl #(32 - 4)
+ stmcsia r0!, {r4, r5, r6, r7}
+ stmmiia r0!, {r4, r5}
+ tst ip, #(1 << 30)
+ mov ip, r1
+ strne r1, [r0], #4
+
+3: subs r2, r2, #64
+ stmgeia r0!, {r1, r3-r7, ip, lr}
+ stmgeia r0!, {r1, r3-r7, ip, lr}
+ bgt 3b
+ ldmeqfd sp!, {r4-r7, pc}
+
+ tst r2, #32
+ stmneia r0!, {r1, r3-r7, ip, lr}
+ tst r2, #16
+ stmneia r0!, {r4-r7}
+ ldmfd sp!, {r4-r7, lr}
+
+#endif
+
4: tst r2, #8
stmneia r0!, {r1, r3}
tst r2, #4
diff --git a/arch/arm/lib/memzero.S b/arch/arm/lib/memzero.S
index abf2508e8221..b8f79d80ee9b 100644
--- a/arch/arm/lib/memzero.S
+++ b/arch/arm/lib/memzero.S
@@ -39,6 +39,9 @@ ENTRY(__memzero)
*/
cmp r1, #16 @ 1 we can skip this chunk if we
blt 4f @ 1 have < 16 bytes
+
+#if ! CALGN(1)+0
+
/*
* We need an extra register for this loop - save the return address and
* use the LR
@@ -64,6 +67,47 @@ ENTRY(__memzero)
stmneia r0!, {r2, r3, ip, lr} @ 4
ldr lr, [sp], #4 @ 1
+#else
+
+/*
+ * This version aligns the destination pointer in order to write
+ * whole cache lines at once.
+ */
+
+ stmfd sp!, {r4-r7, lr}
+ mov r4, r2
+ mov r5, r2
+ mov r6, r2
+ mov r7, r2
+ mov ip, r2
+ mov lr, r2
+
+ cmp r1, #96
+ andgts ip, r0, #31
+ ble 3f
+
+ rsb ip, ip, #32
+ sub r1, r1, ip
+ movs ip, ip, lsl #(32 - 4)
+ stmcsia r0!, {r4, r5, r6, r7}
+ stmmiia r0!, {r4, r5}
+ movs ip, ip, lsl #2
+ strcs r2, [r0], #4
+
+3: subs r1, r1, #64
+ stmgeia r0!, {r2-r7, ip, lr}
+ stmgeia r0!, {r2-r7, ip, lr}
+ bgt 3b
+ ldmeqfd sp!, {r4-r7, pc}
+
+ tst r1, #32
+ stmneia r0!, {r2-r7, ip, lr}
+ tst r1, #16
+ stmneia r0!, {r4-r7}
+ ldmfd sp!, {r4-r7, lr}
+
+#endif
+
4: tst r1, #8 @ 1 8 bytes or more?
stmneia r0!, {r2, r3} @ 2
tst r1, #4 @ 1 4 bytes or more?
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 0fc07b6db749..5bad6b9b00d7 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -30,6 +30,11 @@ config ARCH_AT91SAM9RL
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+config ARCH_AT91SAM9G20
+ bool "AT91SAM9G20"
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+
config ARCH_AT91CAP9
bool "AT91CAP9"
select GENERIC_TIME
@@ -126,6 +131,12 @@ config MACH_ECBAT91
Select this if you are using emQbit's ECB_AT91 board.
<http://wiki.emqbit.com/free-ecb-at91>
+config MACH_YL9200
+ bool "ucDragon YL-9200"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using the ucDragon YL-9200 board.
+
endif
# ----------------------------------------------------------
@@ -164,6 +175,20 @@ config MACH_SAM9_L9260
Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
<http://www.olimex.com/dev/sam9-L9260.html>
+config MACH_USB_A9260
+ bool "CALAO USB-A9260"
+ depends on ARCH_AT91SAM9260
+ help
+ Select this if you are using a Calao Systems USB-A9260.
+ <http://www.calao-systems.com>
+
+config MACH_QIL_A9260
+ bool "CALAO QIL-A9260 board"
+ depends on ARCH_AT91SAM9260
+ help
+ Select this if you are using a Calao Systems QIL-A9260 Board.
+ <http://www.calao-systems.com>
+
endif
# ----------------------------------------------------------
@@ -194,6 +219,13 @@ config MACH_AT91SAM9263EK
Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
+config MACH_USB_A9263
+ bool "CALAO USB-A9263"
+ depends on ARCH_AT91SAM9263
+ help
+ Select this if you are using a Calao Systems USB-A9263.
+ <http://www.calao-systems.com>
+
endif
# ----------------------------------------------------------
@@ -212,6 +244,20 @@ endif
# ----------------------------------------------------------
+if ARCH_AT91SAM9G20
+
+comment "AT91SAM9G20 Board Type"
+
+config MACH_AT91SAM9G20EK
+ bool "Atmel AT91SAM9G20-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9G20
+ help
+ Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit.
+
+endif
+
+# ----------------------------------------------------------
+
if ARCH_AT91CAP9
comment "AT91CAP9 Board Type"
@@ -247,13 +293,13 @@ comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
bool "Enable DataFlash Card support"
- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK || MACH_SAM9_L9260 || MACH_ECBAT91)
+ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK)
help
Enable support for the DataFlash card.
config MTD_NAND_AT91_BUSWIDTH_16
bool "Enable 16-bit data bus interface to NAND flash"
- depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK)
+ depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK)
help
On AT91SAM926x boards both types of NAND flash can be present
(8 and 16 bit data bus width).
@@ -302,15 +348,15 @@ config AT91_EARLY_USART2
config AT91_EARLY_USART3
bool "USART3"
- depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260)
+ depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
config AT91_EARLY_USART4
bool "USART4"
- depends on ARCH_AT91SAM9260
+ depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20
config AT91_EARLY_USART5
bool "USART5"
- depends on ARCH_AT91SAM9260
+ depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20
endchoice
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 8d9bc0153b18..7d641f97516b 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_d
obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
@@ -30,21 +31,28 @@ obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o
+obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o
# AT91SAM9260 board-specific support
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
obj-$(CONFIG_MACH_CAM60) += board-cam60.o
obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o
+obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o
+obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o
# AT91SAM9261 board-specific support
obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
# AT91SAM9263 board-specific support
obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
+obj-$(CONFIG_MACH_USB_A9263) += board-usb-a9263.o
# AT91SAM9RL board-specific support
obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
+# AT91SAM9G20 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
+
# AT91CAP9 board-specific support
obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index be526746e01e..747b9dedab88 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -84,6 +84,105 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
/* --------------------------------------------------------------------
+ * USB HS Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+
+static struct resource usba_udc_resources[] = {
+ [0] = {
+ .start = AT91CAP9_UDPHS_FIFO,
+ .end = AT91CAP9_UDPHS_FIFO + SZ_512K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_BASE_UDPHS,
+ .end = AT91CAP9_BASE_UDPHS + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = AT91CAP9_ID_UDPHS,
+ .end = AT91CAP9_ID_UDPHS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
+ [idx] = { \
+ .name = nam, \
+ .index = idx, \
+ .fifo_size = maxpkt, \
+ .nr_banks = maxbk, \
+ .can_dma = dma, \
+ .can_isoc = isoc, \
+ }
+
+static struct usba_ep_data usba_udc_ep[] = {
+ EP("ep0", 0, 64, 1, 0, 0),
+ EP("ep1", 1, 1024, 3, 1, 1),
+ EP("ep2", 2, 1024, 3, 1, 1),
+ EP("ep3", 3, 1024, 2, 1, 1),
+ EP("ep4", 4, 1024, 2, 1, 1),
+ EP("ep5", 5, 1024, 2, 1, 0),
+ EP("ep6", 6, 1024, 2, 1, 0),
+ EP("ep7", 7, 1024, 2, 0, 0),
+};
+
+#undef EP
+
+/*
+ * pdata doesn't have room for any endpoints, so we need to
+ * append room for the ones we need right after it.
+ */
+static struct {
+ struct usba_platform_data pdata;
+ struct usba_ep_data ep[8];
+} usba_udc_data;
+
+static struct platform_device at91_usba_udc_device = {
+ .name = "atmel_usba_udc",
+ .id = -1,
+ .dev = {
+ .platform_data = &usba_udc_data.pdata,
+ },
+ .resource = usba_udc_resources,
+ .num_resources = ARRAY_SIZE(usba_udc_resources),
+};
+
+void __init at91_add_device_usba(struct usba_platform_data *data)
+{
+ at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS |
+ AT91_MATRIX_UDPHS_BYPASS_LOCK);
+
+ /*
+ * Invalid pins are 0 on AT91, but the usba driver is shared
+ * with AVR32, which use negative values instead. Once/if
+ * gpio_is_valid() is ported to AT91, revisit this code.
+ */
+ usba_udc_data.pdata.vbus_pin = -EINVAL;
+ usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
+ memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
+
+ if (data && data->vbus_pin > 0) {
+ at91_set_gpio_input(data->vbus_pin, 0);
+ at91_set_deglitch(data->vbus_pin, 1);
+ usba_udc_data.pdata.vbus_pin = data->vbus_pin;
+ }
+
+ /* Pullup pin is handled internally by USB device peripheral */
+
+ /* Clocks */
+ at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
+ at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
+
+ platform_device_register(&at91_usba_udc_device);
+}
+#else
+void __init at91_add_device_usba(struct usba_platform_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
* Ethernet
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index ee26550cdc21..380f12a12200 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -47,6 +47,20 @@ static struct map_desc at91sam9260_sram_desc[] __initdata = {
}
};
+static struct map_desc at91sam9g20_sram_desc[] __initdata = {
+ {
+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9G20_SRAM0_SIZE,
+ .pfn = __phys_to_pfn(AT91SAM9G20_SRAM0_BASE),
+ .length = AT91SAM9G20_SRAM0_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9G20_SRAM0_SIZE - AT91SAM9G20_SRAM1_SIZE,
+ .pfn = __phys_to_pfn(AT91SAM9G20_SRAM1_BASE),
+ .length = AT91SAM9G20_SRAM1_SIZE,
+ .type = MT_DEVICE,
+ }
+};
+
static struct map_desc at91sam9xe_sram_desc[] __initdata = {
{
.pfn = __phys_to_pfn(AT91SAM9XE_SRAM_BASE),
@@ -307,6 +321,8 @@ void __init at91sam9260_initialize(unsigned long main_clock)
if (cpu_is_at91sam9xe())
at91sam9xe_initialize();
+ else if (cpu_is_at91sam9g20())
+ iotable_init(at91sam9g20_sram_desc, ARRAY_SIZE(at91sam9g20_sram_desc));
else
iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 393a32aefce5..86cba4ac29b1 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -18,6 +18,7 @@
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
+#include <asm/arch/cpu.h>
#include <asm/arch/at91sam9260.h>
#include <asm/arch/at91sam9260_matrix.h>
#include <asm/arch/at91sam9_smc.h>
@@ -320,20 +321,41 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
csa = at91_sys_read(AT91_MATRIX_EBICSA);
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
- /* set the bus interface characteristics */
- at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
- | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+ if (cpu_is_at91sam9260()) {
+ /* Timing for sam9260 */
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
+ | AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
- | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
+ | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
- at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
- if (data->bus_width_16)
- mode = AT91_SMC_DBW_16;
- else
- mode = AT91_SMC_DBW_8;
- at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
+ if (data->bus_width_16)
+ mode = AT91_SMC_DBW_16;
+ else
+ mode = AT91_SMC_DBW_8;
+ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
+ }
+
+ if (cpu_is_at91sam9g20()) {
+ /* Timing for sam9g20 */
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0)
+ | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
+
+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(4)
+ | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(4));
+
+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+
+ if (data->bus_width_16)
+ mode = AT91_SMC_DBW_16;
+ else
+ mode = AT91_SMC_DBW_8;
+ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(3));
+ }
/* enable pin */
if (data->enable_pin)
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 0babb645b83c..ec1891375dfb 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -232,19 +232,19 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* set the bus interface characteristics */
- at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
- | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
+ | AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
- | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
+ | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
- at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
if (data->bus_width_16)
mode = AT91_SMC_DBW_16;
else
mode = AT91_SMC_DBW_8;
- at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
/* enable pin */
if (data->enable_pin)
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 719667e25c98..8a81f76f0200 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -391,8 +391,8 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
/* set the bus interface characteristics */
- at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
- | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
+ | AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
| AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 450db304936f..ae28101e7542 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -26,6 +26,101 @@
/* --------------------------------------------------------------------
+ * USB HS Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+
+static struct resource usba_udc_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_UDPHS_FIFO,
+ .end = AT91SAM9RL_UDPHS_FIFO + SZ_512K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_BASE_UDPHS,
+ .end = AT91SAM9RL_BASE_UDPHS + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = AT91SAM9RL_ID_UDPHS,
+ .end = AT91SAM9RL_ID_UDPHS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
+ [idx] = { \
+ .name = nam, \
+ .index = idx, \
+ .fifo_size = maxpkt, \
+ .nr_banks = maxbk, \
+ .can_dma = dma, \
+ .can_isoc = isoc, \
+ }
+
+static struct usba_ep_data usba_udc_ep[] __initdata = {
+ EP("ep0", 0, 64, 1, 0, 0),
+ EP("ep1", 1, 1024, 2, 1, 1),
+ EP("ep2", 2, 1024, 2, 1, 1),
+ EP("ep3", 3, 1024, 3, 1, 0),
+ EP("ep4", 4, 1024, 3, 1, 0),
+ EP("ep5", 5, 1024, 3, 1, 1),
+ EP("ep6", 6, 1024, 3, 1, 1),
+};
+
+#undef EP
+
+/*
+ * pdata doesn't have room for any endpoints, so we need to
+ * append room for the ones we need right after it.
+ */
+static struct {
+ struct usba_platform_data pdata;
+ struct usba_ep_data ep[7];
+} usba_udc_data;
+
+static struct platform_device at91_usba_udc_device = {
+ .name = "atmel_usba_udc",
+ .id = -1,
+ .dev = {
+ .platform_data = &usba_udc_data.pdata,
+ },
+ .resource = usba_udc_resources,
+ .num_resources = ARRAY_SIZE(usba_udc_resources),
+};
+
+void __init at91_add_device_usba(struct usba_platform_data *data)
+{
+ /*
+ * Invalid pins are 0 on AT91, but the usba driver is shared
+ * with AVR32, which use negative values instead. Once/if
+ * gpio_is_valid() is ported to AT91, revisit this code.
+ */
+ usba_udc_data.pdata.vbus_pin = -EINVAL;
+ usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
+ memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
+
+ if (data && data->vbus_pin > 0) {
+ at91_set_gpio_input(data->vbus_pin, 0);
+ at91_set_deglitch(data->vbus_pin, 1);
+ usba_udc_data.pdata.vbus_pin = data->vbus_pin;
+ }
+
+ /* Pullup pin is handled internally by USB device peripheral */
+
+ /* Clocks */
+ at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
+ at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
+
+ platform_device_register(&at91_usba_udc_device);
+}
+#else
+void __init at91_add_device_usba(struct usba_platform_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
* MMC / SD
* -------------------------------------------------------------------- */
@@ -138,15 +233,15 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* set the bus interface characteristics */
- at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
- | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
+ | AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
- | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
+ | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
- at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
- at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_DBW_8 | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+ at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_DBW_8 | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
/* enable pin */
if (data->enable_pin)
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index e5512d1ff217..8a2a958639db 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -78,6 +78,12 @@ static struct at91_usbh_data __initdata cap9adk_usbh_data = {
.ports = 2,
};
+/*
+ * USB HS Device port
+ */
+static struct usba_platform_data __initdata cap9adk_usba_udc_data = {
+ .vbus_pin = AT91_PIN_PB31,
+};
/*
* ADS7846 Touchscreen
@@ -326,6 +332,9 @@ static void __init cap9adk_board_init(void)
/* USB Host */
set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH);
at91_add_device_usbh(&cap9adk_usbh_data);
+ /* USB HS */
+ set_irq_type(AT91CAP9_ID_UDPHS, IRQT_HIGH);
+ at91_add_device_usba(&cap9adk_usba_udc_data);
/* SPI */
at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
/* Touchscreen */
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 0f0878294a67..9854fc3dd1f2 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -40,24 +40,21 @@
#include "generic.h"
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata carmeva_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 2,
- .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
-};
-
static void __init carmeva_map_io(void)
{
/* Initialize processor: 20.000 MHz crystal */
at91rm9200_initialize(20000000, AT91RM9200_BGA);
- /* Setup the serial ports and console */
- at91_init_serial(&carmeva_uart_config);
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
}
static void __init carmeva_init_irq(void)
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 419fd19b620b..bb1a5474ddab 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -45,10 +45,10 @@ static void __init csb637_map_io(void)
/* Initialize processor: 3.6864 MHz crystal */
at91rm9200_initialize(3686400, AT91RM9200_BGA);
- /* DBGU on ttyS0 */
+ /* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
- /* make console=ttyS0 the default */
+ /* make console=ttyS0 (ie, DBGU) the default */
at91_set_serial_console(0);
}
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index c1a813c7169b..dab958d25926 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -45,17 +45,6 @@
#include "generic.h"
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata dk_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 2,
- .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
-};
-
static void __init dk_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
@@ -64,8 +53,16 @@ static void __init dk_map_io(void)
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
- /* Setup the serial ports and console */
- at91_init_serial(&dk_uart_config);
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
}
static void __init dk_init_irq(void)
@@ -163,7 +160,7 @@ static struct at91_nand_data __initdata dk_nand_data = {
#define DK_FLASH_SIZE 0x200000
static struct physmap_flash_data dk_flash_data = {
- .width = 2,
+ .width = 2,
};
static struct resource dk_flash_resource = {
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index af1a1d8ecc30..3fe054e0056b 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -40,24 +40,24 @@
#include "generic.h"
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata eb9200_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 2,
- .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
-};
-
static void __init eb9200_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91rm9200_initialize(18432000, AT91RM9200_BGA);
- /* Setup the serial ports and console */
- at91_init_serial(&eb9200_uart_config);
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART2 on ttyS2. (Rx, Tx) - IRDA */
+ at91_register_uart(AT91RM9200_ID_US2, 2, 0);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
}
static void __init eb9200_init_irq(void)
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index 0574e50a30dd..74aa4325eab3 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -45,17 +45,6 @@
#include "generic.h"
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata ek_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 2,
- .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
-};
-
static void __init ek_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
@@ -64,8 +53,16 @@ static void __init ek_map_io(void)
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
- /* Setup the serial ports and console */
- at91_init_serial(&ek_uart_config);
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
}
static void __init ek_init_irq(void)
@@ -122,7 +119,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
#define EK_FLASH_SIZE 0x200000
static struct physmap_flash_data ek_flash_data = {
- .width = 2,
+ .width = 2,
};
static struct resource ek_flash_resource = {
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 4b39b9cda75b..cb065febd95e 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -37,19 +37,10 @@
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
-#include "generic.h"
+#include <asm/arch/at91rm9200_mc.h>
+#include "generic.h"
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata kb9202_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 3,
- .tty_map = { 4, 0, 1, -1, -1 } /* ttyS0, ..., ttyS4 */
-};
static void __init kb9202_map_io(void)
{
@@ -59,8 +50,20 @@ static void __init kb9202_map_io(void)
/* Set up the LEDs */
at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
- /* Setup the serial ports and console */
- at91_init_serial(&kb9202_uart_config);
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1 (Rx & Tx only) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, 0);
+
+ /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
+ at91_register_uart(AT91RM9200_ID_US1, 2, 0);
+
+ /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
+ at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
}
static void __init kb9202_init_irq(void)
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
new file mode 100644
index 000000000000..99b4ec3818d6
--- /dev/null
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -0,0 +1,255 @@
+/*
+ * linux/arch/arm/mach-at91/board-qil-a9260.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2006 Atmel
+ * Copyright (C) 2007 Calao-systems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/clk.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_shdwc.h>
+
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+ /* Initialize processor: 12.000 MHz crystal */
+ at91sam9260_initialize(12000000);
+
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* set serial console to ttyS1 (ie, USART0) */
+ at91_set_serial_console(1);
+
+}
+
+static void __init ek_init_irq(void)
+{
+ at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+ .ports = 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+ .vbus_pin = AT91_PIN_PC5,
+ .pullup_pin = 0, /* pull-up driven by UDC */
+};
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if defined(CONFIG_RTC_DRV_M41T94)
+ { /* M41T94 RTC */
+ .modalias = "m41t94",
+ .chip_select = 0,
+ .max_speed_hz = 1 * 1000 * 1000,
+ .bus_num = 0,
+ }
+#endif
+};
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+ .phy_irq_pin = AT91_PIN_PA31,
+ .is_rmii = 1,
+};
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+ .name = "Uboot & Kernel",
+ .offset = 0x00000000,
+ .size = 16 * 1024 * 1024,
+ },
+ {
+ .name = "Root FS",
+ .offset = 0x01000000,
+ .size = 120 * 1024 * 1024,
+ },
+ {
+ .name = "FS",
+ .offset = 0x08800000,
+ .size = 120 * 1024 * 1024,
+ },
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
+ return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+ .ale = 21,
+ .cle = 22,
+// .det_pin = ... not connected
+ .rdy_pin = AT91_PIN_PC13,
+ .enable_pin = AT91_PIN_PC14,
+ .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+ .bus_width_16 = 1,
+#else
+ .bus_width_16 = 0,
+#endif
+};
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+ .slot_b = 0,
+ .wire4 = 1,
+// .det_pin = ... not connected
+// .wp_pin = ... not connected
+// .vcc_pin = ... not connected
+};
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+ { /* USER PUSH BUTTON */
+ .code = KEY_ENTER,
+ .gpio = AT91_PIN_PB10,
+ .active_low = 1,
+ .desc = "user_pb",
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+ .buttons = ek_buttons,
+ .nbuttons = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_button_data,
+ }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+ at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
+ at91_set_deglitch(AT91_PIN_PB10, 1);
+
+ platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+ { /* user_led (green) */
+ .name = "user_led",
+ .gpio = AT91_PIN_PB21,
+ .active_low = 0,
+ .default_trigger = "heartbeat",
+ }
+};
+
+static void __init ek_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ at91_add_device_usbh(&ek_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&ek_udc_data);
+ /* SPI */
+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+ /* NAND */
+ at91_add_device_nand(&ek_nand_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* Ethernet */
+ at91_add_device_eth(&ek_macb_data);
+ /* MMC */
+ at91_add_device_mmc(0, &ek_mmc_data);
+ /* Push Buttons */
+ ek_add_device_buttons();
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ /* shutdown controller, wakeup button (5 msec low) */
+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
+ | AT91_SHDW_RTTWKEN);
+}
+
+MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
+ /* Maintainer: calao-systems */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = ek_map_io,
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
new file mode 100644
index 000000000000..45617c201240
--- /dev/null
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -0,0 +1,218 @@
+/*
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/at73c213.h>
+#include <linux/clk.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91sam9260_initialize(18432000);
+
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+ at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+ .ports = 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+ .vbus_pin = AT91_PIN_PC5,
+ .pullup_pin = 0, /* pull-up driven by UDC */
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if !defined(CONFIG_MMC_AT91)
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 1,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+ { /* DataFlash card */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+#endif
+#endif
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+ .phy_irq_pin = AT91_PIN_PA7,
+ .is_rmii = 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+ .name = "Bootstrap",
+ .offset = 0,
+ .size = 4 * 1024 * 1024,
+ },
+ {
+ .name = "Partition 1",
+ .offset = 4 * 1024 * 1024,
+ .size = 60 * 1024 * 1024,
+ },
+ {
+ .name = "Partition 2",
+ .offset = 64 * 1024 * 1024,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
+ return ek_nand_partition;
+}
+
+/* det_pin is not connected */
+static struct at91_nand_data __initdata ek_nand_data = {
+ .ale = 21,
+ .cle = 22,
+ .rdy_pin = AT91_PIN_PC13,
+ .enable_pin = AT91_PIN_PC14,
+ .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+ .bus_width_16 = 1,
+#else
+ .bus_width_16 = 0,
+#endif
+};
+
+
+/*
+ * MCI (SD/MMC)
+ * det_pin, wp_pin and vcc_pin are not connected
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+ .slot_b = 1,
+ .wire4 = 1,
+};
+
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+ { /* "bottom" led, green, userled1 to be defined */
+ .name = "ds5",
+ .gpio = AT91_PIN_PA6,
+ .active_low = 1,
+ .default_trigger = "none",
+ },
+ { /* "power" led, yellow */
+ .name = "ds1",
+ .gpio = AT91_PIN_PA9,
+ .default_trigger = "heartbeat",
+ }
+};
+
+static void __init ek_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ at91_add_device_usbh(&ek_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&ek_udc_data);
+ /* SPI */
+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+ /* NAND */
+ at91_add_device_nand(&ek_nand_data);
+ /* Ethernet */
+ at91_add_device_eth(&ek_macb_data);
+ /* MMC */
+ at91_add_device_mmc(0, &ek_mmc_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+}
+
+MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
+ /* Maintainer: Atmel */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = ek_map_io,
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index ffc0597aee8d..b6a70fc735c3 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -56,6 +56,14 @@ static void __init ek_init_irq(void)
/*
+ * USB HS Device port
+ */
+static struct usba_platform_data __initdata ek_usba_udc_data = {
+ .vbus_pin = AT91_PIN_PA8,
+};
+
+
+/*
* MCI (SD/MMC)
*/
static struct at91_mmc_data __initdata ek_mmc_data = {
@@ -175,6 +183,8 @@ static void __init ek_board_init(void)
{
/* Serial */
at91_add_device_serial();
+ /* USB HS */
+ at91_add_device_usba(&ek_usba_udc_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
/* NAND */
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
new file mode 100644
index 000000000000..837aedf8ffeb
--- /dev/null
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -0,0 +1,215 @@
+/*
+ * linux/arch/arm/mach-at91/board-usb-a9260.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2006 Atmel
+ * Copyright (C) 2007 Calao-systems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/clk.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_shdwc.h>
+
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+ /* Initialize processor: 12.000 MHz crystal */
+ at91sam9260_initialize(12000000);
+
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+ at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+ .ports = 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+ .vbus_pin = AT91_PIN_PC5,
+ .pullup_pin = 0, /* pull-up driven by UDC */
+};
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+ .phy_irq_pin = AT91_PIN_PA31,
+ .is_rmii = 1,
+};
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+ .name = "Uboot & Kernel",
+ .offset = 0x00000000,
+ .size = 16 * 1024 * 1024,
+ },
+ {
+ .name = "Root FS",
+ .offset = 0x01000000,
+ .size = 120 * 1024 * 1024,
+ },
+ {
+ .name = "FS",
+ .offset = 0x08800000,
+ .size = 120 * 1024 * 1024,
+ }
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
+ return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+ .ale = 21,
+ .cle = 22,
+// .det_pin = ... not connected
+ .rdy_pin = AT91_PIN_PC13,
+ .enable_pin = AT91_PIN_PC14,
+ .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+ .bus_width_16 = 1,
+#else
+ .bus_width_16 = 0,
+#endif
+};
+
+/*
+ * GPIO Buttons
+ */
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+ { /* USER PUSH BUTTON */
+ .code = KEY_ENTER,
+ .gpio = AT91_PIN_PB10,
+ .active_low = 1,
+ .desc = "user_pb",
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+ .buttons = ek_buttons,
+ .nbuttons = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_button_data,
+ }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+ at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
+ at91_set_deglitch(AT91_PIN_PB10, 1);
+
+ platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+ { /* user_led (green) */
+ .name = "user_led",
+ .gpio = AT91_PIN_PB21,
+ .active_low = 0,
+ .default_trigger = "heartbeat",
+ }
+};
+
+static void __init ek_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ at91_add_device_usbh(&ek_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&ek_udc_data);
+ /* NAND */
+ at91_add_device_nand(&ek_nand_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* Ethernet */
+ at91_add_device_eth(&ek_macb_data);
+ /* Push Buttons */
+ ek_add_device_buttons();
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ /* shutdown controller, wakeup button (5 msec low) */
+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
+ | AT91_SHDW_RTTWKEN);
+}
+
+MACHINE_START(USB_A9260, "CALAO USB_A9260")
+ /* Maintainer: calao-systems */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = ek_map_io,
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
new file mode 100644
index 000000000000..95800d32bd49
--- /dev/null
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -0,0 +1,230 @@
+/*
+ * linux/arch/arm/mach-at91/board-usb-a9263.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2007 Atmel Corporation.
+ * Copyright (C) 2007 Calao-systems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_shdwc.h>
+
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+ /* Initialize processor: 12.00 MHz crystal */
+ at91sam9263_initialize(12000000);
+
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+ at91sam9263_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+ .ports = 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+ .vbus_pin = AT91_PIN_PB11,
+ .pullup_pin = 0, /* pull-up driven by UDC */
+};
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if !defined(CONFIG_MMC_AT91)
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ }
+#endif
+};
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+ .phy_irq_pin = AT91_PIN_PE31,
+ .is_rmii = 1,
+};
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+ .name = "Linux Kernel",
+ .offset = 0x00000000,
+ .size = 16 * 1024 * 1024,
+ },
+ {
+ .name = "Root FS",
+ .offset = 0x01000000,
+ .size = 120 * 1024 * 1024,
+ },
+ {
+ .name = "FS",
+ .offset = 0x08800000,
+ .size = 120 * 1024 * 1024,
+ }
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
+ return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+ .ale = 21,
+ .cle = 22,
+// .det_pin = ... not connected
+ .rdy_pin = AT91_PIN_PA22,
+ .enable_pin = AT91_PIN_PD15,
+ .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+ .bus_width_16 = 1,
+#else
+ .bus_width_16 = 0,
+#endif
+};
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+ { /* USER PUSH BUTTON */
+ .code = KEY_ENTER,
+ .gpio = AT91_PIN_PB10,
+ .active_low = 1,
+ .desc = "user_pb",
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+ .buttons = ek_buttons,
+ .nbuttons = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_button_data,
+ }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+ at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
+ at91_set_deglitch(AT91_PIN_PB10, 1);
+
+ platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+ { /* user_led (green) */
+ .name = "user_led",
+ .gpio = AT91_PIN_PB21,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ }
+};
+
+
+static void __init ek_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ at91_add_device_usbh(&ek_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&ek_udc_data);
+ /* SPI */
+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+ /* Ethernet */
+ at91_add_device_eth(&ek_macb_data);
+ /* NAND */
+ at91_add_device_nand(&ek_nand_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* Push Buttons */
+ ek_add_device_buttons();
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ /* shutdown controller, wakeup button (5 msec low) */
+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
+ | AT91_SHDW_RTTWKEN);
+}
+
+MACHINE_START(USB_A9263, "CALAO USB_A9263")
+ /* Maintainer: calao-systems */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = ek_map_io,
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index b5717108991d..7079050ab88d 100755
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -1,11 +1,10 @@
/*
* linux/arch/arm/mach-at91/board-yl-9200.c
*
- * Adapted from:
- *various board files in
- * /arch/arm/mach-at91
- * modifications to convert to YL-9200 platform
- * Copyright (C) 2007 S.Birtles
+ * Adapted from various board files in arch/arm/mach-at91
+ *
+ * Modifications for YL-9200 platform:
+ * Copyright (C) 2007 S. Birtles
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -26,13 +25,14 @@
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
-/*#include <linux/can_bus/candata.h>*/
#include <linux/spi/ads7846.h>
#include <linux/mtd/physmap.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
-/*#include <sound/gpio_sounder.h>*/
#include <asm/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -45,179 +45,108 @@
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
#include <asm/arch/at91rm9200_mc.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
#include "generic.h"
-#include <asm/arch/at91_pio.h>
-#define YL_9200_FLASH_BASE AT91_CHIPSELECT_0
-#define YL_9200_FLASH_SIZE 0x800000
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- *atmel_usart.0: ttyS0 at MMIO 0xfefff200 (irq = 1) is a ATMEL_SERIAL
- *atmel_usart.1: ttyS1 at MMIO 0xfffc0000 (irq = 6) is a ATMEL_SERIAL
- *atmel_usart.2: ttyS2 at MMIO 0xfffc4000 (irq = 7) is a ATMEL_SERIAL
- *atmel_usart.3: ttyS3 at MMIO 0xfffc8000 (irq = 8) is a ATMEL_SERIAL
- *atmel_usart.4: ttyS4 at MMIO 0xfffcc000 (irq = 9) is a ATMEL_SERIAL
- * on the YL-9200 we are sitting at the following
- *ttyS0 at MMIO 0xfefff200 (irq = 1) is a AT91_SERIAL
- *ttyS1 at MMIO 0xfefc4000 (irq = 7) is a AT91_SERIAL
- */
+static void __init yl9200_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
-/* extern void __init yl_9200_add_device_sounder(struct gpio_sounder *sounders, int nr);*/
+ /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
+ at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
-static struct at91_uart_config __initdata yl_9200_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 3,
- .tty_map = { 4, 1, 0, -1, -1 } /* ttyS0, ..., ttyS4 */
-};
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
-static void __init yl_9200_map_io(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- /*Also initialises register clocks & gpio*/
- at91rm9200_initialize(18432000, AT91RM9200_PQFP); /*we have a 3 bank system*/
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
- /* Setup the serial ports and console */
- at91_init_serial(&yl_9200_uart_config);
+ /* USART0 on ttyS2. (Rx & Tx only to JP3) */
+ at91_register_uart(AT91RM9200_ID_US0, 2, 0);
- /* Setup the LEDs D2=PB17,D3=PB16 */
- at91_init_leds(AT91_PIN_PB16,AT91_PIN_PB17); /*cpu-led,timer-led*/
+ /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
+ at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
}
-static void __init yl_9200_init_irq(void)
+static void __init yl9200_init_irq(void)
{
at91rm9200_init_interrupts(NULL);
}
-static struct at91_eth_data __initdata yl_9200_eth_data = {
- .phy_irq_pin = AT91_PIN_PB28,
- .is_rmii = 1,
-};
-static struct at91_usbh_data __initdata yl_9200_usbh_data = {
- .ports = 1, /* this should be 1 not 2 for the Yl9200*/
+/*
+ * LEDs
+ */
+static struct gpio_led yl9200_leds[] = {
+ { /* D2 */
+ .name = "led2",
+ .gpio = AT91_PIN_PB17,
+ .active_low = 1,
+ .default_trigger = "timer",
+ },
+ { /* D3 */
+ .name = "led3",
+ .gpio = AT91_PIN_PB16,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* D4 */
+ .name = "led4",
+ .gpio = AT91_PIN_PB15,
+ .active_low = 1,
+ },
+ { /* D5 */
+ .name = "led5",
+ .gpio = AT91_PIN_PB8,
+ .active_low = 1,
+ }
};
-static struct at91_udc_data __initdata yl_9200_udc_data = {
-/*on sheet 7 Schemitic rev 1.0*/
- .pullup_pin = AT91_PIN_PC4,
- .vbus_pin= AT91_PIN_PC5,
- .pullup_active_low = 1, /*ACTIVE LOW!! due to PNP transistor on page 7*/
-
-};
/*
-static struct at91_cf_data __initdata yl_9200_cf_data = {
-TODO S.BIRTLES
- .det_pin = AT91_PIN_xxx,
- .rst_pin = AT91_PIN_xxx,
- .irq_pin = ... not connected
- .vcc_pin = ... always powered
-
+ * Ethernet
+ */
+static struct at91_eth_data __initdata yl9200_eth_data = {
+ .phy_irq_pin = AT91_PIN_PB28,
+ .is_rmii = 1,
};
-*/
-static struct at91_mmc_data __initdata yl_9200_mmc_data = {
- .det_pin = AT91_PIN_PB9, /*THIS LOOKS CORRECT SHEET7*/
-/* .wp_pin = ... not connected SHEET7*/
- .slot_b = 0,
- .wire4 = 1,
+/*
+ * USB Host
+ */
+static struct at91_usbh_data __initdata yl9200_usbh_data = {
+ .ports = 1, /* PQFP version of AT91RM9200 */
};
-/* --------------------------------------------------------------------
- * Touch screen
- * -------------------------------------------------------------------- */
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-static int ads7843_pendown_state(void)
-{
- return !at91_get_gpio_value(AT91_PIN_PB11); /* Touchscreen PENIRQ */
-}
-
-static void __init at91_init_device_ts(void)
-{
-/*IMPORTANT NOTE THE SPI INTERFACE IS ALREADY CONFIGURED BY XXX_DEVICES.C
-THAT IS TO SAY THAT MISO,MOSI,SPCK AND CS are already configured
-we only need to enable the other datapins which are:
-PB10/RK1 BUSY
-*/
-/* Touchscreen BUSY signal , pin,use pullup ( TODO not currently used in the ADS7843/6.c driver)*/
-at91_set_gpio_input(AT91_PIN_PB10, 1);
-}
-
-#else
-static void __init at91_init_device_ts(void) {}
-#endif
-
-static struct ads7846_platform_data ads_info = {
- .model = 7843,
- .x_min = 150,
- .x_max = 3830,
- .y_min = 190,
- .y_max = 3830,
- .vref_delay_usecs = 100,
-/* for a 8" touch screen*/
- //.x_plate_ohms = 603, //= 450, S.Birtles TODO
- //.y_plate_ohms = 332, //= 250, S.Birtles TODO
-/*for a 10.4" touch screen*/
- //.x_plate_ohms =611,
- //.y_plate_ohms =325,
-
- .x_plate_ohms = 576,
- .y_plate_ohms = 366,
- //
- .pressure_max = 15000, /*generally nonsense on the 7843*/
- /*number of times to send query to chip in a given run 0 equals one time (do not set to 0!! ,there is a bug in ADS 7846 code)*/
- .debounce_max = 1,
- .debounce_rep = 0,
- .debounce_tol = (~0),
- .get_pendown_state = ads7843_pendown_state,
-};
+/*
+ * USB Device
+ */
+static struct at91_udc_data __initdata yl9200_udc_data = {
+ .pullup_pin = AT91_PIN_PC4,
+ .vbus_pin = AT91_PIN_PC5,
+ .pullup_active_low = 1, /* Active Low due to PNP transistor (pg 7) */
-/*static struct canbus_platform_data can_info = {
- .model = 2510,
};
-*/
-
-static struct spi_board_info yl_9200_spi_devices[] = {
-/*this sticks it at:
- /sys/devices/platform/atmel_spi.0/spi0.0
- /sys/bus/platform/devices/
-Documentation/spi IIRC*/
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
- /*(this IS correct 04-NOV-2007)*/
- {
- .modalias = "ads7846", /* because the driver is called ads7846*/
- .chip_select = 0, /*THIS MUST BE AN INDEX INTO AN ARRAY OF pins */
-/*this is ONLY TO BE USED if chipselect above is not used, it passes a pin directly for the chip select*/
- /*.controller_data =AT91_PIN_PA3 ,*/
- .max_speed_hz = 5000*26, /*(4700 * 26)-125000 * 26, (max sample rate @ 3V) * (cmd + data + overhead) */
- .bus_num = 0,
- .platform_data = &ads_info,
- .irq = AT91_PIN_PB11,
- },
-#endif
-/*we need to put our CAN driver data here!!*/
-/*THIS IS ALL DUMMY DATA*/
-/* {
- .modalias = "mcp2510", //DUMMY for MCP2510 chip
- .chip_select = 1,*/ /*THIS MUST BE AN INDEX INTO AN ARRAY OF pins */
- /*this is ONLY TO BE USED if chipselect above is not used, it passes a pin directly for the chip select */
- /* .controller_data =AT91_PIN_PA4 ,
- .max_speed_hz = 25000 * 26,
- .bus_num = 0,
- .platform_data = &can_info,
- .irq = AT91_PIN_PC0,
- },
- */
- //max SPI chip needs to go here
+/*
+ * MMC
+ */
+static struct at91_mmc_data __initdata yl9200_mmc_data = {
+ .det_pin = AT91_PIN_PB9,
+ // .wp_pin = ... not connected
+ .wire4 = 1,
};
-static struct mtd_partition __initdata yl_9200_nand_partition[] = {
+/*
+ * NAND Flash
+ */
+static struct mtd_partition __initdata yl9200_nand_partition[] = {
{
.name = "AT91 NAND partition 1, boot",
.offset = 0,
@@ -242,442 +171,434 @@ static struct mtd_partition __initdata yl_9200_nand_partition[] = {
.name = "AT91 NAND partition 5, ext-fs",
.offset = 32 * SZ_1M,
.size = 32 * SZ_1M
- },
+ }
};
static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
{
- *num_partitions = ARRAY_SIZE(yl_9200_nand_partition);
- return yl_9200_nand_partition;
+ *num_partitions = ARRAY_SIZE(yl9200_nand_partition);
+ return yl9200_nand_partition;
}
-static struct at91_nand_data __initdata yl_9200_nand_data = {
- .ale= 6,
- .cle= 7,
- /*.det_pin = AT91_PIN_PCxx,*/ /*we don't have a det pin because NandFlash is fixed to board*/
- .rdy_pin = AT91_PIN_PC14, /*R/!B Sheet10*/
- .enable_pin = AT91_PIN_PC15, /*!CE Sheet10 */
+static struct at91_nand_data __initdata yl9200_nand_data = {
+ .ale = 6,
+ .cle = 7,
+ // .det_pin = ... not connected
+ .rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */
+ .enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */
.partition_info = nand_partitions,
};
-
-
/*
-TODO S.Birtles
-potentially a problem with the size above
-physmap platform flash device: 00800000 at 10000000
-physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
-NOR chip too large to fit in mapping. Attempting to cope...
- Intel/Sharp Extended Query Table at 0x0031
-Using buffer write method
-cfi_cmdset_0001: Erase suspend on write enabled
-Reducing visibility of 16384KiB chip to 8192KiB
-*/
+ * NOR Flash
+ */
+#define YL9200_FLASH_BASE AT91_CHIPSELECT_0
+#define YL9200_FLASH_SIZE 0x1000000
-static struct mtd_partition yl_9200_flash_partitions[] = {
+static struct mtd_partition yl9200_flash_partitions[] = {
+ {
+ .name = "Bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
{
- .name = "Bootloader",
- .size = 0x00040000,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE /* force read-only */
- },{
- .name = "Kernel",
- .size = 0x001C0000,
- .offset = 0x00040000,
- },{
- .name = "Filesystem",
- .size = MTDPART_SIZ_FULL,
- .offset = 0x00200000
+ .name = "Kernel",
+ .size = 0x001C0000,
+ .offset = 0x00040000,
+ },
+ {
+ .name = "Filesystem",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0x00200000
}
-
};
-static struct physmap_flash_data yl_9200_flash_data = {
- .width = 2,
- .parts = yl_9200_flash_partitions,
- .nr_parts = ARRAY_SIZE(yl_9200_flash_partitions),
+static struct physmap_flash_data yl9200_flash_data = {
+ .width = 2,
+ .parts = yl9200_flash_partitions,
+ .nr_parts = ARRAY_SIZE(yl9200_flash_partitions),
};
-static struct resource yl_9200_flash_resources[] = {
-{
- .start = YL_9200_FLASH_BASE,
- .end = YL_9200_FLASH_BASE + YL_9200_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
+static struct resource yl9200_flash_resources[] = {
+ {
+ .start = YL9200_FLASH_BASE,
+ .end = YL9200_FLASH_BASE + YL9200_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
}
};
-static struct platform_device yl_9200_flash = {
+static struct platform_device yl9200_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
- .platform_data = &yl_9200_flash_data,
+ .platform_data = &yl9200_flash_data,
},
- .resource = yl_9200_flash_resources,
- .num_resources = ARRAY_SIZE(yl_9200_flash_resources),
+ .resource = yl9200_flash_resources,
+ .num_resources = ARRAY_SIZE(yl9200_flash_resources),
};
-
-static struct gpio_led yl_9200_leds[] = {
-/*D2 &D3 are passed directly in via at91_init_leds*/
- {
- .name = "led4", /*D4*/
- .gpio = AT91_PIN_PB15,
- .active_low = 1,
- .default_trigger = "heartbeat",
- /*.default_trigger = "timer",*/
- },
- {
- .name = "led5", /*D5*/
- .gpio = AT91_PIN_PB8,
- .active_low = 1,
- .default_trigger = "heartbeat",
- }
-};
-
-//static struct gpio_sounder yl_9200_sounder[] = {*/
-/*This is a simple speaker attached to a gpo line*/
-
-// {
-// .name = "Speaker", /*LS1*/
-// .gpio = AT91_PIN_PA22,
-// .active_low = 0,
-// .default_trigger = "heartbeat",
- /*.default_trigger = "timer",*/
-// },
-//};
-
-
-
-static struct i2c_board_info __initdata yl_9200_i2c_devices[] = {
- {
- /*TODO*/
- I2C_BOARD_INFO("CS4334", 0x00),
+/*
+ * I2C (TWI)
+ */
+static struct i2c_board_info __initdata yl9200_i2c_devices[] = {
+ { /* EEPROM */
+ I2C_BOARD_INFO("24c128", 0x50),
}
};
-
- /*
+/*
* GPIO Buttons
- */
+*/
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button yl_9200_buttons[] = {
+static struct gpio_keys_button yl9200_buttons[] = {
{
.gpio = AT91_PIN_PA24,
- .code = BTN_2,
+ .code = BTN_2,
.desc = "SW2",
.active_low = 1,
.wakeup = 1,
},
{
.gpio = AT91_PIN_PB1,
- .code = BTN_3,
+ .code = BTN_3,
.desc = "SW3",
.active_low = 1,
.wakeup = 1,
},
{
.gpio = AT91_PIN_PB2,
- .code = BTN_4,
+ .code = BTN_4,
.desc = "SW4",
.active_low = 1,
.wakeup = 1,
},
{
.gpio = AT91_PIN_PB6,
- .code = BTN_5,
+ .code = BTN_5,
.desc = "SW5",
.active_low = 1,
.wakeup = 1,
- },
-
+ }
};
-static struct gpio_keys_platform_data yl_9200_button_data = {
- .buttons = yl_9200_buttons,
- .nbuttons = ARRAY_SIZE(yl_9200_buttons),
+static struct gpio_keys_platform_data yl9200_button_data = {
+ .buttons = yl9200_buttons,
+ .nbuttons = ARRAY_SIZE(yl9200_buttons),
};
-static struct platform_device yl_9200_button_device = {
+static struct platform_device yl9200_button_device = {
.name = "gpio-keys",
.id = -1,
.num_resources = 0,
.dev = {
- .platform_data = &yl_9200_button_data,
+ .platform_data = &yl9200_button_data,
}
};
-static void __init yl_9200_add_device_buttons(void)
+static void __init yl9200_add_device_buttons(void)
{
- //SW2
- at91_set_gpio_input(AT91_PIN_PA24, 0);
+ at91_set_gpio_input(AT91_PIN_PA24, 1); /* SW2 */
at91_set_deglitch(AT91_PIN_PA24, 1);
-
- //SW3
- at91_set_gpio_input(AT91_PIN_PB1, 0);
+ at91_set_gpio_input(AT91_PIN_PB1, 1); /* SW3 */
at91_set_deglitch(AT91_PIN_PB1, 1);
- //SW4
- at91_set_gpio_input(AT91_PIN_PB2, 0);
+ at91_set_gpio_input(AT91_PIN_PB2, 1); /* SW4 */
at91_set_deglitch(AT91_PIN_PB2, 1);
-
- //SW5
- at91_set_gpio_input(AT91_PIN_PB6, 0);
+ at91_set_gpio_input(AT91_PIN_PB6, 1); /* SW5 */
at91_set_deglitch(AT91_PIN_PB6, 1);
+ /* Enable buttons (Sheet 5) */
+ at91_set_gpio_output(AT91_PIN_PB7, 1);
+
+ platform_device_register(&yl9200_button_device);
+}
+#else
+static void __init yl9200_add_device_buttons(void) {}
+#endif
+
+/*
+ * Touchscreen
+ */
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+static int ads7843_pendown_state(void)
+{
+ return !at91_get_gpio_value(AT91_PIN_PB11); /* Touchscreen PENIRQ */
+}
+
+static struct ads7846_platform_data ads_info = {
+ .model = 7843,
+ .x_min = 150,
+ .x_max = 3830,
+ .y_min = 190,
+ .y_max = 3830,
+ .vref_delay_usecs = 100,
+
+ /* For a 8" touch-screen */
+ // .x_plate_ohms = 603,
+ // .y_plate_ohms = 332,
+
+ /* For a 10.4" touch-screen */
+ // .x_plate_ohms = 611,
+ // .y_plate_ohms = 325,
+
+ .x_plate_ohms = 576,
+ .y_plate_ohms = 366,
+
+ .pressure_max = 15000, /* generally nonsense on the 7843 */
+ .debounce_max = 1,
+ .debounce_rep = 0,
+ .debounce_tol = (~0),
+ .get_pendown_state = ads7843_pendown_state,
+};
- at91_set_gpio_output(AT91_PIN_PB7, 1); /* #TURN BUTTONS ON, SHEET 5 of schematics */
- platform_device_register(&yl_9200_button_device);
+static void __init yl9200_add_device_ts(void)
+{
+ at91_set_gpio_input(AT91_PIN_PB11, 1); /* Touchscreen interrupt pin */
+ at91_set_gpio_input(AT91_PIN_PB10, 1); /* Touchscreen BUSY signal - not used! */
}
#else
-static void __init yl_9200_add_device_buttons(void) {}
+static void __init yl9200_add_device_ts(void) {}
+#endif
+
+/*
+ * SPI devices
+ */
+static struct spi_board_info yl9200_spi_devices[] = {
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+ { /* Touchscreen */
+ .modalias = "ads7846",
+ .chip_select = 0,
+ .max_speed_hz = 5000 * 26,
+ .platform_data = &ads_info,
+ .irq = AT91_PIN_PB11,
+ },
#endif
+ { /* CAN */
+ .modalias = "mcp2510",
+ .chip_select = 1,
+ .max_speed_hz = 25000 * 26,
+ .irq = AT91_PIN_PC0,
+ }
+};
+/*
+ * LCD / VGA
+ *
+ * EPSON S1D13806 FB (discontinued chip)
+ * EPSON S1D13506 FB
+ */
#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
#include <video/s1d13xxxfb.h>
-/* EPSON S1D13806 FB (discontinued chip)*/
-/* EPSON S1D13506 FB */
-
#define AT91_FB_REG_BASE 0x80000000L
#define AT91_FB_REG_SIZE 0x200
#define AT91_FB_VMEM_BASE 0x80200000L
#define AT91_FB_VMEM_SIZE 0x200000L
-/*#define S1D_DISPLAY_WIDTH 640*/
-/*#define S1D_DISPLAY_HEIGHT 480*/
-
-
-static void __init yl_9200_init_video(void)
+static void __init yl9200_init_video(void)
{
- at91_sys_write(AT91_PIOC + PIO_ASR,AT91_PIN_PC6);
- at91_sys_write(AT91_PIOC + PIO_BSR,0);
- at91_sys_write(AT91_PIOC + PIO_ASR,AT91_PIN_PC6);
-
- at91_sys_write( AT91_SMC_CSR(2),
- AT91_SMC_NWS_(0x4) |
- AT91_SMC_WSEN |
- AT91_SMC_TDF_(0x100) |
- AT91_SMC_DBW
- );
-
-
+ /* NWAIT Signal */
+ at91_set_A_periph(AT91_PIN_PC6, 0);
+ /* Initialization of the Static Memory Controller for Chip Select 2 */
+ at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */
+ | AT91_SMC_WSEN | AT91_SMC_NWS_(0x4) /* wait states */
+ | AT91_SMC_TDF_(0x100) /* float time */
+ );
}
-
-static struct s1d13xxxfb_regval yl_9200_s1dfb_initregs[] =
+static struct s1d13xxxfb_regval yl9200_s1dfb_initregs[] =
{
- {S1DREG_MISC, 0x00}, /* Miscellaneous Register*/
- {S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/
- {S1DREG_GPIO_CNF0, 0x00}, /* General IO Pins Configuration Register*/
- {S1DREG_GPIO_CTL0, 0x00}, /* General IO Pins Control Register*/
- {S1DREG_CLK_CNF, 0x11}, /* Memory Clock Configuration Register*/
- {S1DREG_LCD_CLK_CNF, 0x10}, /* LCD Pixel Clock Configuration Register*/
- {S1DREG_CRT_CLK_CNF, 0x12}, /* CRT/TV Pixel Clock Configuration Register*/
- {S1DREG_MPLUG_CLK_CNF, 0x01}, /* MediaPlug Clock Configuration Register*/
- {S1DREG_CPU2MEM_WST_SEL, 0x02}, /* CPU To Memory Wait State Select Register*/
- {S1DREG_MEM_CNF, 0x00}, /* Memory Configuration Register*/
- {S1DREG_SDRAM_REF_RATE, 0x04}, /* DRAM Refresh Rate Register, MCLK source*/
- {S1DREG_SDRAM_TC0, 0x12}, /* DRAM Timings Control Register 0*/
- {S1DREG_SDRAM_TC1, 0x02}, /* DRAM Timings Control Register 1*/
- {S1DREG_PANEL_TYPE, 0x25}, /* Panel Type Register*/
- {S1DREG_MOD_RATE, 0x00}, /* MOD Rate Register*/
- {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* LCD Horizontal Display Width Register*/
- {S1DREG_LCD_NDISP_HPER, 0x13}, /* LCD Horizontal Non-Display Period Register*/
- {S1DREG_TFT_FPLINE_START, 0x01}, /* TFT FPLINE Start Position Register*/
- {S1DREG_TFT_FPLINE_PWIDTH, 0x0c}, /* TFT FPLINE Pulse Width Register*/
- {S1DREG_LCD_DISP_VHEIGHT0, 0xDF}, /* LCD Vertical Display Height Register 0*/
- {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* LCD Vertical Display Height Register 1*/
- {S1DREG_LCD_NDISP_VPER, 0x2c}, /* LCD Vertical Non-Display Period Register*/
- {S1DREG_TFT_FPFRAME_START, 0x0a}, /* TFT FPFRAME Start Position Register*/
- {S1DREG_TFT_FPFRAME_PWIDTH, 0x02}, /* TFT FPFRAME Pulse Width Register*/
- {S1DREG_LCD_DISP_MODE, 0x05}, /* LCD Display Mode Register*/
- {S1DREG_LCD_MISC, 0x01}, /* LCD Miscellaneous Register*/
- {S1DREG_LCD_DISP_START0, 0x00}, /* LCD Display Start Address Register 0*/
- {S1DREG_LCD_DISP_START1, 0x00}, /* LCD Display Start Address Register 1*/
- {S1DREG_LCD_DISP_START2, 0x00}, /* LCD Display Start Address Register 2*/
- {S1DREG_LCD_MEM_OFF0, 0x80}, /* LCD Memory Address Offset Register 0*/
- {S1DREG_LCD_MEM_OFF1, 0x02}, /* LCD Memory Address Offset Register 1*/
- {S1DREG_LCD_PIX_PAN, 0x03}, /* LCD Pixel Panning Register*/
- {S1DREG_LCD_DISP_FIFO_HTC, 0x00}, /* LCD Display FIFO High Threshold Control Register*/
- {S1DREG_LCD_DISP_FIFO_LTC, 0x00}, /* LCD Display FIFO Low Threshold Control Register*/
- {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* CRT/TV Horizontal Display Width Register*/
- {S1DREG_CRT_NDISP_HPER, 0x13}, /* CRT/TV Horizontal Non-Display Period Register*/
- {S1DREG_CRT_HRTC_START, 0x01}, /* CRT/TV HRTC Start Position Register*/
- {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* CRT/TV HRTC Pulse Width Register*/
- {S1DREG_CRT_DISP_VHEIGHT0, 0xDF}, /* CRT/TV Vertical Display Height Register 0*/
- {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* CRT/TV Vertical Display Height Register 1*/
- {S1DREG_CRT_NDISP_VPER, 0x2B}, /* CRT/TV Vertical Non-Display Period Register*/
- {S1DREG_CRT_VRTC_START, 0x09}, /* CRT/TV VRTC Start Position Register*/
- {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* CRT/TV VRTC Pulse Width Register*/
- {S1DREG_TV_OUT_CTL, 0x18}, /* TV Output Control Register */
- {S1DREG_CRT_DISP_MODE, 0x05}, /* CRT/TV Display Mode Register, 16BPP*/
- {S1DREG_CRT_DISP_START0, 0x00}, /* CRT/TV Display Start Address Register 0*/
- {S1DREG_CRT_DISP_START1, 0x00}, /* CRT/TV Display Start Address Register 1*/
- {S1DREG_CRT_DISP_START2, 0x00}, /* CRT/TV Display Start Address Register 2*/
- {S1DREG_CRT_MEM_OFF0, 0x80}, /* CRT/TV Memory Address Offset Register 0*/
- {S1DREG_CRT_MEM_OFF1, 0x02}, /* CRT/TV Memory Address Offset Register 1*/
- {S1DREG_CRT_PIX_PAN, 0x00}, /* CRT/TV Pixel Panning Register*/
- {S1DREG_CRT_DISP_FIFO_HTC, 0x00}, /* CRT/TV Display FIFO High Threshold Control Register*/
- {S1DREG_CRT_DISP_FIFO_LTC, 0x00}, /* CRT/TV Display FIFO Low Threshold Control Register*/
- {S1DREG_LCD_CUR_CTL, 0x00}, /* LCD Ink/Cursor Control Register*/
- {S1DREG_LCD_CUR_START, 0x01}, /* LCD Ink/Cursor Start Address Register*/
- {S1DREG_LCD_CUR_XPOS0, 0x00}, /* LCD Cursor X Position Register 0*/
- {S1DREG_LCD_CUR_XPOS1, 0x00}, /* LCD Cursor X Position Register 1*/
- {S1DREG_LCD_CUR_YPOS0, 0x00}, /* LCD Cursor Y Position Register 0*/
- {S1DREG_LCD_CUR_YPOS1, 0x00}, /* LCD Cursor Y Position Register 1*/
- {S1DREG_LCD_CUR_BCTL0, 0x00}, /* LCD Ink/Cursor Blue Color 0 Register*/
- {S1DREG_LCD_CUR_GCTL0, 0x00}, /* LCD Ink/Cursor Green Color 0 Register*/
- {S1DREG_LCD_CUR_RCTL0, 0x00}, /* LCD Ink/Cursor Red Color 0 Register*/
- {S1DREG_LCD_CUR_BCTL1, 0x1F}, /* LCD Ink/Cursor Blue Color 1 Register*/
- {S1DREG_LCD_CUR_GCTL1, 0x3F}, /* LCD Ink/Cursor Green Color 1 Register*/
- {S1DREG_LCD_CUR_RCTL1, 0x1F}, /* LCD Ink/Cursor Red Color 1 Register*/
- {S1DREG_LCD_CUR_FIFO_HTC, 0x00}, /* LCD Ink/Cursor FIFO Threshold Register*/
- {S1DREG_CRT_CUR_CTL, 0x00}, /* CRT/TV Ink/Cursor Control Register*/
- {S1DREG_CRT_CUR_START, 0x01}, /* CRT/TV Ink/Cursor Start Address Register*/
- {S1DREG_CRT_CUR_XPOS0, 0x00}, /* CRT/TV Cursor X Position Register 0*/
- {S1DREG_CRT_CUR_XPOS1, 0x00}, /* CRT/TV Cursor X Position Register 1*/
- {S1DREG_CRT_CUR_YPOS0, 0x00}, /* CRT/TV Cursor Y Position Register 0*/
- {S1DREG_CRT_CUR_YPOS1, 0x00}, /* CRT/TV Cursor Y Position Register 1*/
- {S1DREG_CRT_CUR_BCTL0, 0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register*/
- {S1DREG_CRT_CUR_GCTL0, 0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register*/
- {S1DREG_CRT_CUR_RCTL0, 0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register*/
- {S1DREG_CRT_CUR_BCTL1, 0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register*/
- {S1DREG_CRT_CUR_GCTL1, 0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register*/
- {S1DREG_CRT_CUR_RCTL1, 0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register*/
- {S1DREG_CRT_CUR_FIFO_HTC, 0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register*/
- {S1DREG_BBLT_CTL0, 0x00}, /* BitBlt Control Register 0*/
- {S1DREG_BBLT_CTL1, 0x01}, /* BitBlt Control Register 1*/
- {S1DREG_BBLT_CC_EXP, 0x00}, /* BitBlt ROP Code/Color Expansion Register*/
- {S1DREG_BBLT_OP, 0x00}, /* BitBlt Operation Register*/
- {S1DREG_BBLT_SRC_START0, 0x00}, /* BitBlt Source Start Address Register 0*/
- {S1DREG_BBLT_SRC_START1, 0x00}, /* BitBlt Source Start Address Register 1*/
- {S1DREG_BBLT_SRC_START2, 0x00}, /* BitBlt Source Start Address Register 2*/
- {S1DREG_BBLT_DST_START0, 0x00}, /* BitBlt Destination Start Address Register 0*/
- {S1DREG_BBLT_DST_START1, 0x00}, /* BitBlt Destination Start Address Register 1*/
- {S1DREG_BBLT_DST_START2, 0x00}, /* BitBlt Destination Start Address Register 2*/
- {S1DREG_BBLT_MEM_OFF0, 0x00}, /* BitBlt Memory Address Offset Register 0*/
- {S1DREG_BBLT_MEM_OFF1, 0x00}, /* BitBlt Memory Address Offset Register 1*/
- {S1DREG_BBLT_WIDTH0, 0x00}, /* BitBlt Width Register 0*/
- {S1DREG_BBLT_WIDTH1, 0x00}, /* BitBlt Width Register 1*/
- {S1DREG_BBLT_HEIGHT0, 0x00}, /* BitBlt Height Register 0*/
- {S1DREG_BBLT_HEIGHT1, 0x00}, /* BitBlt Height Register 1*/
- {S1DREG_BBLT_BGC0, 0x00}, /* BitBlt Background Color Register 0*/
- {S1DREG_BBLT_BGC1, 0x00}, /* BitBlt Background Color Register 1*/
- {S1DREG_BBLT_FGC0, 0x00}, /* BitBlt Foreground Color Register 0*/
- {S1DREG_BBLT_FGC1, 0x00}, /* BitBlt Foreground Color Register 1*/
- {S1DREG_LKUP_MODE, 0x00}, /* Look-Up Table Mode Register*/
- {S1DREG_LKUP_ADDR, 0x00}, /* Look-Up Table Address Register*/
- {S1DREG_PS_CNF, 0x00}, /* Power Save Configuration Register*/
- {S1DREG_PS_STATUS, 0x00}, /* Power Save Status Register*/
- {S1DREG_CPU2MEM_WDOGT, 0x00}, /* CPU-to-Memory Access Watchdog Timer Register*/
- {S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/
+ {S1DREG_MISC, 0x00}, /* Miscellaneous Register*/
+ {S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/
+ {S1DREG_GPIO_CNF0, 0x00}, /* General IO Pins Configuration Register*/
+ {S1DREG_GPIO_CTL0, 0x00}, /* General IO Pins Control Register*/
+ {S1DREG_CLK_CNF, 0x11}, /* Memory Clock Configuration Register*/
+ {S1DREG_LCD_CLK_CNF, 0x10}, /* LCD Pixel Clock Configuration Register*/
+ {S1DREG_CRT_CLK_CNF, 0x12}, /* CRT/TV Pixel Clock Configuration Register*/
+ {S1DREG_MPLUG_CLK_CNF, 0x01}, /* MediaPlug Clock Configuration Register*/
+ {S1DREG_CPU2MEM_WST_SEL, 0x02}, /* CPU To Memory Wait State Select Register*/
+ {S1DREG_MEM_CNF, 0x00}, /* Memory Configuration Register*/
+ {S1DREG_SDRAM_REF_RATE, 0x04}, /* DRAM Refresh Rate Register, MCLK source*/
+ {S1DREG_SDRAM_TC0, 0x12}, /* DRAM Timings Control Register 0*/
+ {S1DREG_SDRAM_TC1, 0x02}, /* DRAM Timings Control Register 1*/
+ {S1DREG_PANEL_TYPE, 0x25}, /* Panel Type Register*/
+ {S1DREG_MOD_RATE, 0x00}, /* MOD Rate Register*/
+ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* LCD Horizontal Display Width Register*/
+ {S1DREG_LCD_NDISP_HPER, 0x13}, /* LCD Horizontal Non-Display Period Register*/
+ {S1DREG_TFT_FPLINE_START, 0x01}, /* TFT FPLINE Start Position Register*/
+ {S1DREG_TFT_FPLINE_PWIDTH, 0x0c}, /* TFT FPLINE Pulse Width Register*/
+ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF}, /* LCD Vertical Display Height Register 0*/
+ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* LCD Vertical Display Height Register 1*/
+ {S1DREG_LCD_NDISP_VPER, 0x2c}, /* LCD Vertical Non-Display Period Register*/
+ {S1DREG_TFT_FPFRAME_START, 0x0a}, /* TFT FPFRAME Start Position Register*/
+ {S1DREG_TFT_FPFRAME_PWIDTH, 0x02}, /* TFT FPFRAME Pulse Width Register*/
+ {S1DREG_LCD_DISP_MODE, 0x05}, /* LCD Display Mode Register*/
+ {S1DREG_LCD_MISC, 0x01}, /* LCD Miscellaneous Register*/
+ {S1DREG_LCD_DISP_START0, 0x00}, /* LCD Display Start Address Register 0*/
+ {S1DREG_LCD_DISP_START1, 0x00}, /* LCD Display Start Address Register 1*/
+ {S1DREG_LCD_DISP_START2, 0x00}, /* LCD Display Start Address Register 2*/
+ {S1DREG_LCD_MEM_OFF0, 0x80}, /* LCD Memory Address Offset Register 0*/
+ {S1DREG_LCD_MEM_OFF1, 0x02}, /* LCD Memory Address Offset Register 1*/
+ {S1DREG_LCD_PIX_PAN, 0x03}, /* LCD Pixel Panning Register*/
+ {S1DREG_LCD_DISP_FIFO_HTC, 0x00}, /* LCD Display FIFO High Threshold Control Register*/
+ {S1DREG_LCD_DISP_FIFO_LTC, 0x00}, /* LCD Display FIFO Low Threshold Control Register*/
+ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* CRT/TV Horizontal Display Width Register*/
+ {S1DREG_CRT_NDISP_HPER, 0x13}, /* CRT/TV Horizontal Non-Display Period Register*/
+ {S1DREG_CRT_HRTC_START, 0x01}, /* CRT/TV HRTC Start Position Register*/
+ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* CRT/TV HRTC Pulse Width Register*/
+ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF}, /* CRT/TV Vertical Display Height Register 0*/
+ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* CRT/TV Vertical Display Height Register 1*/
+ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* CRT/TV Vertical Non-Display Period Register*/
+ {S1DREG_CRT_VRTC_START, 0x09}, /* CRT/TV VRTC Start Position Register*/
+ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* CRT/TV VRTC Pulse Width Register*/
+ {S1DREG_TV_OUT_CTL, 0x18}, /* TV Output Control Register */
+ {S1DREG_CRT_DISP_MODE, 0x05}, /* CRT/TV Display Mode Register, 16BPP*/
+ {S1DREG_CRT_DISP_START0, 0x00}, /* CRT/TV Display Start Address Register 0*/
+ {S1DREG_CRT_DISP_START1, 0x00}, /* CRT/TV Display Start Address Register 1*/
+ {S1DREG_CRT_DISP_START2, 0x00}, /* CRT/TV Display Start Address Register 2*/
+ {S1DREG_CRT_MEM_OFF0, 0x80}, /* CRT/TV Memory Address Offset Register 0*/
+ {S1DREG_CRT_MEM_OFF1, 0x02}, /* CRT/TV Memory Address Offset Register 1*/
+ {S1DREG_CRT_PIX_PAN, 0x00}, /* CRT/TV Pixel Panning Register*/
+ {S1DREG_CRT_DISP_FIFO_HTC, 0x00}, /* CRT/TV Display FIFO High Threshold Control Register*/
+ {S1DREG_CRT_DISP_FIFO_LTC, 0x00}, /* CRT/TV Display FIFO Low Threshold Control Register*/
+ {S1DREG_LCD_CUR_CTL, 0x00}, /* LCD Ink/Cursor Control Register*/
+ {S1DREG_LCD_CUR_START, 0x01}, /* LCD Ink/Cursor Start Address Register*/
+ {S1DREG_LCD_CUR_XPOS0, 0x00}, /* LCD Cursor X Position Register 0*/
+ {S1DREG_LCD_CUR_XPOS1, 0x00}, /* LCD Cursor X Position Register 1*/
+ {S1DREG_LCD_CUR_YPOS0, 0x00}, /* LCD Cursor Y Position Register 0*/
+ {S1DREG_LCD_CUR_YPOS1, 0x00}, /* LCD Cursor Y Position Register 1*/
+ {S1DREG_LCD_CUR_BCTL0, 0x00}, /* LCD Ink/Cursor Blue Color 0 Register*/
+ {S1DREG_LCD_CUR_GCTL0, 0x00}, /* LCD Ink/Cursor Green Color 0 Register*/
+ {S1DREG_LCD_CUR_RCTL0, 0x00}, /* LCD Ink/Cursor Red Color 0 Register*/
+ {S1DREG_LCD_CUR_BCTL1, 0x1F}, /* LCD Ink/Cursor Blue Color 1 Register*/
+ {S1DREG_LCD_CUR_GCTL1, 0x3F}, /* LCD Ink/Cursor Green Color 1 Register*/
+ {S1DREG_LCD_CUR_RCTL1, 0x1F}, /* LCD Ink/Cursor Red Color 1 Register*/
+ {S1DREG_LCD_CUR_FIFO_HTC, 0x00}, /* LCD Ink/Cursor FIFO Threshold Register*/
+ {S1DREG_CRT_CUR_CTL, 0x00}, /* CRT/TV Ink/Cursor Control Register*/
+ {S1DREG_CRT_CUR_START, 0x01}, /* CRT/TV Ink/Cursor Start Address Register*/
+ {S1DREG_CRT_CUR_XPOS0, 0x00}, /* CRT/TV Cursor X Position Register 0*/
+ {S1DREG_CRT_CUR_XPOS1, 0x00}, /* CRT/TV Cursor X Position Register 1*/
+ {S1DREG_CRT_CUR_YPOS0, 0x00}, /* CRT/TV Cursor Y Position Register 0*/
+ {S1DREG_CRT_CUR_YPOS1, 0x00}, /* CRT/TV Cursor Y Position Register 1*/
+ {S1DREG_CRT_CUR_BCTL0, 0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register*/
+ {S1DREG_CRT_CUR_GCTL0, 0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register*/
+ {S1DREG_CRT_CUR_RCTL0, 0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register*/
+ {S1DREG_CRT_CUR_BCTL1, 0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register*/
+ {S1DREG_CRT_CUR_GCTL1, 0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register*/
+ {S1DREG_CRT_CUR_RCTL1, 0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register*/
+ {S1DREG_CRT_CUR_FIFO_HTC, 0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register*/
+ {S1DREG_BBLT_CTL0, 0x00}, /* BitBlt Control Register 0*/
+ {S1DREG_BBLT_CTL1, 0x01}, /* BitBlt Control Register 1*/
+ {S1DREG_BBLT_CC_EXP, 0x00}, /* BitBlt ROP Code/Color Expansion Register*/
+ {S1DREG_BBLT_OP, 0x00}, /* BitBlt Operation Register*/
+ {S1DREG_BBLT_SRC_START0, 0x00}, /* BitBlt Source Start Address Register 0*/
+ {S1DREG_BBLT_SRC_START1, 0x00}, /* BitBlt Source Start Address Register 1*/
+ {S1DREG_BBLT_SRC_START2, 0x00}, /* BitBlt Source Start Address Register 2*/
+ {S1DREG_BBLT_DST_START0, 0x00}, /* BitBlt Destination Start Address Register 0*/
+ {S1DREG_BBLT_DST_START1, 0x00}, /* BitBlt Destination Start Address Register 1*/
+ {S1DREG_BBLT_DST_START2, 0x00}, /* BitBlt Destination Start Address Register 2*/
+ {S1DREG_BBLT_MEM_OFF0, 0x00}, /* BitBlt Memory Address Offset Register 0*/
+ {S1DREG_BBLT_MEM_OFF1, 0x00}, /* BitBlt Memory Address Offset Register 1*/
+ {S1DREG_BBLT_WIDTH0, 0x00}, /* BitBlt Width Register 0*/
+ {S1DREG_BBLT_WIDTH1, 0x00}, /* BitBlt Width Register 1*/
+ {S1DREG_BBLT_HEIGHT0, 0x00}, /* BitBlt Height Register 0*/
+ {S1DREG_BBLT_HEIGHT1, 0x00}, /* BitBlt Height Register 1*/
+ {S1DREG_BBLT_BGC0, 0x00}, /* BitBlt Background Color Register 0*/
+ {S1DREG_BBLT_BGC1, 0x00}, /* BitBlt Background Color Register 1*/
+ {S1DREG_BBLT_FGC0, 0x00}, /* BitBlt Foreground Color Register 0*/
+ {S1DREG_BBLT_FGC1, 0x00}, /* BitBlt Foreground Color Register 1*/
+ {S1DREG_LKUP_MODE, 0x00}, /* Look-Up Table Mode Register*/
+ {S1DREG_LKUP_ADDR, 0x00}, /* Look-Up Table Address Register*/
+ {S1DREG_PS_CNF, 0x00}, /* Power Save Configuration Register*/
+ {S1DREG_PS_STATUS, 0x00}, /* Power Save Status Register*/
+ {S1DREG_CPU2MEM_WDOGT, 0x00}, /* CPU-to-Memory Access Watchdog Timer Register*/
+ {S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/
};
-static u64 s1dfb_dmamask = 0xffffffffUL;
+static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
-static struct s1d13xxxfb_pdata yl_9200_s1dfb_pdata = {
- .initregs = yl_9200_s1dfb_initregs,
- .initregssize = ARRAY_SIZE(yl_9200_s1dfb_initregs),
- .platform_init_video = yl_9200_init_video,
+static struct s1d13xxxfb_pdata yl9200_s1dfb_pdata = {
+ .initregs = yl9200_s1dfb_initregs,
+ .initregssize = ARRAY_SIZE(yl9200_s1dfb_initregs),
+ .platform_init_video = yl9200_init_video,
};
-static struct resource yl_9200_s1dfb_resource[] = {
+static struct resource yl9200_s1dfb_resource[] = {
[0] = { /* video mem */
- .name = "s1d13xxxfb memory",
- /* .name = "s1d13806 memory",*/
- .start = AT91_FB_VMEM_BASE,
- .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
- .flags = IORESOURCE_MEM,
+ .name = "s1d13xxxfb memory",
+ .start = AT91_FB_VMEM_BASE,
+ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
+ .flags = IORESOURCE_MEM,
},
[1] = { /* video registers */
- .name = "s1d13xxxfb registers",
- /* .name = "s1d13806 registers",*/
- .start = AT91_FB_REG_BASE,
- .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
- .flags = IORESOURCE_MEM,
+ .name = "s1d13xxxfb registers",
+ .start = AT91_FB_REG_BASE,
+ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
+ .flags = IORESOURCE_MEM,
},
};
-static struct platform_device yl_9200_s1dfb_device = {
- /*TODO S.Birtles , really we need the chip revision in here as well*/
- .name = "s1d13806fb",
- /* .name = "s1d13506fb",*/
- .id = -1,
- .dev = {
- /*TODO theres a waring here!!*/
- /*WARNING: vmlinux.o(.data+0x2dbc): Section mismatch: reference to .init.text: (between 'yl_9200_s1dfb_pdata' and 's1dfb_dmamask')*/
+static struct platform_device yl9200_s1dfb_device = {
+ .name = "s1d13806fb",
+ .id = -1,
+ .dev = {
.dma_mask = &s1dfb_dmamask,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &yl_9200_s1dfb_pdata,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &yl9200_s1dfb_pdata,
},
- .resource = yl_9200_s1dfb_resource,
- .num_resources = ARRAY_SIZE(yl_9200_s1dfb_resource),
+ .resource = yl9200_s1dfb_resource,
+ .num_resources = ARRAY_SIZE(yl9200_s1dfb_resource),
};
-void __init yl_9200_add_device_video(void)
+void __init yl9200_add_device_video(void)
{
- platform_device_register(&yl_9200_s1dfb_device);
+ platform_device_register(&yl9200_s1dfb_device);
}
#else
- void __init yl_9200_add_device_video(void) {}
+void __init yl9200_add_device_video(void) {}
#endif
-/*this is not called first , yl_9200_map_io is called first*/
-static void __init yl_9200_board_init(void)
+
+static void __init yl9200_board_init(void)
{
/* Serial */
at91_add_device_serial();
/* Ethernet */
- at91_add_device_eth(&yl_9200_eth_data);
+ at91_add_device_eth(&yl9200_eth_data);
/* USB Host */
- at91_add_device_usbh(&yl_9200_usbh_data);
+ at91_add_device_usbh(&yl9200_usbh_data);
/* USB Device */
- at91_add_device_udc(&yl_9200_udc_data);
- /* pullup_pin it is actually active low, but this is not needed, driver sets it up */
- /*at91_set_multi_drive(yl_9200_udc_data.pullup_pin, 0);*/
-
- /* Compact Flash */
- /*at91_add_device_cf(&yl_9200_cf_data);*/
-
+ at91_add_device_udc(&yl9200_udc_data);
/* I2C */
- at91_add_device_i2c(yl_9200_i2c_devices, ARRAY_SIZE(yl_9200_i2c_devices));
- /* SPI */
- /*TODO YL9200 we have 2 spi interfaces touch screen & CAN*/
- /* AT91_PIN_PA5, AT91_PIN_PA6 , are used on the max 485 NOT SPI*/
-
- /*touch screen and CAN*/
- at91_add_device_spi(yl_9200_spi_devices, ARRAY_SIZE(yl_9200_spi_devices));
-
- /*Basically the TS uses PB11 & PB10 , PB11 is configured by the SPI system BP10 IS NOT USED!!*/
- /* we need this incase the board is running without a touch screen*/
- #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
- at91_init_device_ts(); /*init the touch screen device*/
- #endif
- /* DataFlash card */
- at91_add_device_mmc(0, &yl_9200_mmc_data);
+ at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
+ /* MMC */
+ at91_add_device_mmc(0, &yl9200_mmc_data);
/* NAND */
- at91_add_device_nand(&yl_9200_nand_data);
+ at91_add_device_nand(&yl9200_nand_data);
/* NOR Flash */
- platform_device_register(&yl_9200_flash);
- /* LEDs. Note!! this does not include the led's we passed for the processor status */
- at91_gpio_leds(yl_9200_leds, ARRAY_SIZE(yl_9200_leds));
- /* VGA */
- /*this is self registered by including the s1d13xxx chip in the kernel build*/
- yl_9200_add_device_video();
+ platform_device_register(&yl9200_flash);
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+ /* SPI */
+ at91_add_device_spi(yl9200_spi_devices, ARRAY_SIZE(yl9200_spi_devices));
+ /* Touchscreen */
+ yl9200_add_device_ts();
+#endif
+ /* LEDs. */
+ at91_gpio_leds(yl9200_leds, ARRAY_SIZE(yl9200_leds));
/* Push Buttons */
- yl_9200_add_device_buttons();
- /*TODO fixup the Sounder */
-// yl_9200_add_device_sounder(yl_9200_sounder,ARRAY_SIZE(yl_9200_sounder));
-
+ yl9200_add_device_buttons();
+ /* VGA */
+ yl9200_add_device_video();
}
MACHINE_START(YL9200, "uCdragon YL-9200")
- /* Maintainer: S.Birtles*/
- .phys_io = AT91_BASE_SYS,
+ /* Maintainer: S.Birtles */
+ .phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
- .timer = &at91rm9200_timer,
- .map_io = yl_9200_map_io,
- .init_irq = yl_9200_init_irq,
- .init_machine = yl_9200_board_init,
+ .timer = &at91rm9200_timer,
+ .map_io = yl9200_map_io,
+ .init_irq = yl9200_init_irq,
+ .init_machine = yl9200_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index a33dfe450726..464bdbbf74df 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -112,12 +112,34 @@ static void pmc_sys_mode(struct clk *clk, int is_on)
at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask);
}
+static void pmc_uckr_mode(struct clk *clk, int is_on)
+{
+ unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
+
+ if (is_on) {
+ is_on = AT91_PMC_LOCKU;
+ at91_sys_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
+ } else
+ at91_sys_write(AT91_CKGR_UCKR, uckr & ~(clk->pmc_mask));
+
+ do {
+ cpu_relax();
+ } while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKU) != is_on);
+}
+
/* USB function clocks (PLLB must be 48 MHz) */
static struct clk udpck = {
.name = "udpck",
.parent = &pllb,
.mode = pmc_sys_mode,
};
+static struct clk utmi_clk = {
+ .name = "utmi_clk",
+ .parent = &main_clk,
+ .pmc_mask = AT91_PMC_UPLLEN, /* in CKGR_UCKR */
+ .mode = pmc_uckr_mode,
+ .type = CLK_TYPE_PLL,
+};
static struct clk uhpck = {
.name = "uhpck",
.parent = &pllb,
@@ -361,7 +383,7 @@ static void __init init_programmable_clock(struct clk *clk)
static int at91_clk_show(struct seq_file *s, void *unused)
{
- u32 scsr, pcsr, sr;
+ u32 scsr, pcsr, uckr = 0, sr;
struct clk *clk;
seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
@@ -369,7 +391,10 @@ static int at91_clk_show(struct seq_file *s, void *unused)
seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR));
seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
- seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
+ if (!cpu_is_at91sam9rl())
+ seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
+ if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+ seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR));
seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
@@ -382,6 +407,8 @@ static int at91_clk_show(struct seq_file *s, void *unused)
state = (scsr & clk->pmc_mask) ? "on" : "off";
else if (clk->mode == pmc_periph_mode)
state = (pcsr & clk->pmc_mask) ? "on" : "off";
+ else if (clk->mode == pmc_uckr_mode)
+ state = (uckr & clk->pmc_mask) ? "on" : "off";
else if (clk->pmc_mask)
state = (sr & clk->pmc_mask) ? "on" : "off";
else if (clk == &clk32k || clk == &main_clk)
@@ -488,14 +515,19 @@ static unsigned __init at91_pll_calc(unsigned main_freq, unsigned out_freq)
/*
* PLL input between 1MHz and 32MHz per spec, but lower
* frequences seem necessary in some cases so allow 100K.
+ * Warning: some newer products need 2MHz min.
*/
input = main_freq / i;
+ if (cpu_is_at91sam9g20() && input < 2000000)
+ continue;
if (input < 100000)
continue;
if (input > 32000000)
continue;
mul1 = out_freq / input;
+ if (cpu_is_at91sam9g20() && mul > 63)
+ continue;
if (mul1 > 2048)
continue;
if (mul1 < 2)
@@ -555,7 +587,8 @@ int __init at91_clock_init(unsigned long main_clock)
/* report if PLLA is more than mildly overclocked */
plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
- if (plla.rate_hz > 209000000)
+ if ((!cpu_is_at91sam9g20() && plla.rate_hz > 209000000)
+ || (cpu_is_at91sam9g20() && plla.rate_hz > 800000000))
pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
/*
@@ -570,7 +603,7 @@ int __init at91_clock_init(unsigned long main_clock)
uhpck.pmc_mask = AT91RM9200_PMC_UHP;
udpck.pmc_mask = AT91RM9200_PMC_UDP;
at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
- } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
+ } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
udpck.pmc_mask = AT91SAM926x_PMC_UDP;
} else if (cpu_is_at91cap9()) {
@@ -582,6 +615,17 @@ int __init at91_clock_init(unsigned long main_clock)
uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
/*
+ * USB HS clock init
+ */
+ if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) {
+ /*
+ * multiplier is hard-wired to 40
+ * (obtain the USB High Speed 480 MHz when input is 12 MHz)
+ */
+ utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
+ }
+
+ /*
* MCK and CPU derive from one of those primary clocks.
* For now, assume this parentage won't change.
*/
@@ -591,13 +635,21 @@ int __init at91_clock_init(unsigned long main_clock)
freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2)); /* prescale */
if (cpu_is_at91rm9200())
mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
- else
- mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
+ else if (cpu_is_at91sam9g20()) {
+ mck.rate_hz = (mckr & AT91_PMC_MDIV) ?
+ freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq; /* mdiv ; (x >> 7) = ((x >> 8) * 2) */
+ if (mckr & AT91_PMC_PDIV)
+ freq /= 2; /* processor clock division */
+ } else
+ mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
/* Register the PMC's standard clocks */
for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
+ if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+ list_add_tail(&utmi_clk.node, &clocks);
+
/* MCK and CPU clock are "always on" */
clk_enable(&mck);
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index aa863c157708..8ab4feb1ec5b 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -202,7 +202,7 @@ static int at91_pm_verify_clocks(void)
pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
return 0;
}
- } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
+ } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
if ((scsr & (AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP)) != 0) {
pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
return 0;
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 9d7515c36bff..f62c35500bb7 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -74,6 +74,7 @@ struct clk *clk_get(struct device *dev, const char *id)
return ERR_PTR(-ENOENT);
}
+EXPORT_SYMBOL(clk_get);
int clk_enable(struct clk *clk)
{
@@ -86,6 +87,7 @@ int clk_enable(struct clk *clk)
return 0;
}
+EXPORT_SYMBOL(clk_enable);
void clk_disable(struct clk *clk)
{
@@ -96,15 +98,18 @@ void clk_disable(struct clk *clk)
__raw_writel(value & ~clk->enable_mask, clk->enable_reg);
}
}
+EXPORT_SYMBOL(clk_disable);
unsigned long clk_get_rate(struct clk *clk)
{
return clk->rate;
}
+EXPORT_SYMBOL(clk_get_rate);
void clk_put(struct clk *clk)
{
}
+EXPORT_SYMBOL(clk_put);
diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile
index 0694ad6b6476..32f8609e4f85 100644
--- a/arch/arm/mach-footbridge/Makefile
+++ b/arch/arm/mach-footbridge/Makefile
@@ -14,12 +14,10 @@ pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o
pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
pci-$(CONFIG_ARCH_PERSONAL_SERVER) += personal-pci.o
-leds-$(CONFIG_ARCH_CO285) += ebsa285-leds.o
leds-$(CONFIG_ARCH_EBSA285) += ebsa285-leds.o
leds-$(CONFIG_ARCH_NETWINDER) += netwinder-leds.o
obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o
-obj-$(CONFIG_ARCH_CO285) += co285.o dc21285-timer.o
obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o
obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o
obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o
diff --git a/arch/arm/mach-footbridge/co285.c b/arch/arm/mach-footbridge/co285.c
deleted file mode 100644
index 4545576ad8d9..000000000000
--- a/arch/arm/mach-footbridge/co285.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * linux/arch/arm/mach-footbridge/co285.c
- *
- * CO285 machine fixup
- */
-#include <linux/init.h>
-
-#include <asm/hardware/dec21285.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-
-static void __init
-fixup_coebsa285(struct machine_desc *desc, struct tag *tags,
- char **cmdline, struct meminfo *mi)
-{
- extern unsigned long boot_memory_end;
- extern char boot_command_line[];
-
- mi->nr_banks = 1;
- mi->bank[0].start = PHYS_OFFSET;
- mi->bank[0].size = boot_memory_end;
- mi->bank[0].node = 0;
-
- *cmdline = boot_command_line;
-}
-
-MACHINE_START(CO285, "co-EBSA285")
- /* Maintainer: Mark van Doesburg */
- .phys_io = DC21285_ARMCSR_BASE,
- .io_pg_offst = ((0x7cf00000) >> 18) & 0xfffc,
- .fixup = fixup_coebsa285,
- .map_io = footbridge_map_io,
- .init_irq = footbridge_init_irq,
- .timer = &footbridge_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index ef29fc34ce65..b08ab507c052 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -177,25 +177,6 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = {
#endif
};
-/*
- * The CO-ebsa285 mapping.
- */
-static struct map_desc co285_io_desc[] __initdata = {
-#ifdef CONFIG_ARCH_CO285
- {
- .virtual = PCIO_BASE,
- .pfn = __phys_to_pfn(DC21285_PCI_IO),
- .length = PCIO_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = PCIMEM_BASE,
- .pfn = __phys_to_pfn(DC21285_PCI_MEM),
- .length = PCIMEM_SIZE,
- .type = MT_DEVICE,
- },
-#endif
-};
-
void __init footbridge_map_io(void)
{
/*
@@ -208,8 +189,6 @@ void __init footbridge_map_io(void)
* Now, work out what we've got to map in addition on this
* platform.
*/
- if (machine_is_co285())
- iotable_init(co285_io_desc, ARRAY_SIZE(co285_io_desc));
if (footbridge_cfn_mode())
iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
}
diff --git a/arch/arm/mach-footbridge/ebsa285-leds.c b/arch/arm/mach-footbridge/ebsa285-leds.c
index a64e22226515..09c1fbc51876 100644
--- a/arch/arm/mach-footbridge/ebsa285-leds.c
+++ b/arch/arm/mach-footbridge/ebsa285-leds.c
@@ -128,7 +128,7 @@ static void ebsa285_leds_event(led_event_t evt)
static int __init leds_init(void)
{
- if (machine_is_ebsa285() || machine_is_co285())
+ if (machine_is_ebsa285())
leds_event = ebsa285_leds_event;
leds_event(led_start);
diff --git a/arch/arm/mach-footbridge/time.c b/arch/arm/mach-footbridge/time.c
index 5d02e95dede3..d5cfcda385d6 100644
--- a/arch/arm/mach-footbridge/time.c
+++ b/arch/arm/mach-footbridge/time.c
@@ -115,8 +115,7 @@ static int set_isa_cmos_time(void)
void __init isa_rtc_init(void)
{
- if (machine_is_co285() ||
- machine_is_personal_server())
+ if (machine_is_personal_server())
/*
* Add-in 21285s shouldn't access the RTC
*/
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 88d5e61a2e13..b047c7e795a9 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -4,7 +4,7 @@
# Object file lists.
-obj-y += irq.o time.o dma.o generic.o
+obj-y += irq.o time.o dma.o generic.o clock.o
obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c
new file mode 100644
index 000000000000..6a90fe5578df
--- /dev/null
+++ b/arch/arm/mach-imx/clock.c
@@ -0,0 +1,205 @@
+/*
+ * Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/math64.h>
+#include <linux/err.h>
+
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+
+/*
+ * Very simple approach: We can't disable clocks, so we do
+ * not need refcounting
+ */
+
+struct clk {
+ struct list_head node;
+ const char *name;
+ unsigned long (*get_rate)(void);
+};
+
+/*
+ * get the system pll clock in Hz
+ *
+ * mfi + mfn / (mfd +1)
+ * f = 2 * f_ref * --------------------
+ * pd + 1
+ */
+static unsigned long imx_decode_pll(unsigned int pll, u32 f_ref)
+{
+ unsigned long long ll;
+ unsigned long quot;
+
+ u32 mfi = (pll >> 10) & 0xf;
+ u32 mfn = pll & 0x3ff;
+ u32 mfd = (pll >> 16) & 0x3ff;
+ u32 pd = (pll >> 26) & 0xf;
+
+ mfi = mfi <= 5 ? 5 : mfi;
+
+ ll = 2 * (unsigned long long)f_ref *
+ ((mfi << 16) + (mfn << 16) / (mfd + 1));
+ quot = (pd + 1) * (1 << 16);
+ ll += quot / 2;
+ do_div(ll, quot);
+ return (unsigned long)ll;
+}
+
+static unsigned long imx_get_system_clk(void)
+{
+ u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512);
+
+ return imx_decode_pll(SPCTL0, f_ref);
+}
+
+static unsigned long imx_get_mcu_clk(void)
+{
+ return imx_decode_pll(MPCTL0, CLK32 * 512);
+}
+
+/*
+ * get peripheral clock 1 ( UART[12], Timer[12], PWM )
+ */
+static unsigned long imx_get_perclk1(void)
+{
+ return imx_get_system_clk() / (((PCDR) & 0xf)+1);
+}
+
+/*
+ * get peripheral clock 2 ( LCD, SD, SPI[12] )
+ */
+static unsigned long imx_get_perclk2(void)
+{
+ return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1);
+}
+
+/*
+ * get peripheral clock 3 ( SSI )
+ */
+static unsigned long imx_get_perclk3(void)
+{
+ return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1);
+}
+
+/*
+ * get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
+ */
+static unsigned long imx_get_hclk(void)
+{
+ return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1);
+}
+
+static struct clk clk_system_clk = {
+ .name = "system_clk",
+ .get_rate = imx_get_system_clk,
+};
+
+static struct clk clk_hclk = {
+ .name = "hclk",
+ .get_rate = imx_get_hclk,
+};
+
+static struct clk clk_mcu_clk = {
+ .name = "mcu_clk",
+ .get_rate = imx_get_mcu_clk,
+};
+
+static struct clk clk_perclk1 = {
+ .name = "perclk1",
+ .get_rate = imx_get_perclk1,
+};
+
+static struct clk clk_uart_clk = {
+ .name = "uart_clk",
+ .get_rate = imx_get_perclk1,
+};
+
+static struct clk clk_perclk2 = {
+ .name = "perclk2",
+ .get_rate = imx_get_perclk2,
+};
+
+static struct clk clk_perclk3 = {
+ .name = "perclk3",
+ .get_rate = imx_get_perclk3,
+};
+
+static struct clk *clks[] = {
+ &clk_perclk1,
+ &clk_perclk2,
+ &clk_perclk3,
+ &clk_system_clk,
+ &clk_hclk,
+ &clk_mcu_clk,
+ &clk_uart_clk,
+};
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ struct clk *p, *clk = ERR_PTR(-ENOENT);
+
+ mutex_lock(&clocks_mutex);
+ list_for_each_entry(p, &clocks, node) {
+ if (!strcmp(p->name, id)) {
+ clk = p;
+ goto found;
+ }
+ }
+
+found:
+ mutex_unlock(&clocks_mutex);
+
+ return clk;
+}
+
+void clk_put(struct clk *clk)
+{
+}
+
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+
+void clk_disable(struct clk *clk)
+{
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->get_rate();
+}
+
+int imx_clocks_init(void)
+{
+ int i;
+
+ mutex_lock(&clocks_mutex);
+ for (i = 0; i < ARRAY_SIZE(clks); i++)
+ list_add(&clks[i]->node, &clocks);
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
index e548ba74a4d2..be0809b33e08 100644
--- a/arch/arm/mach-imx/cpufreq.c
+++ b/arch/arm/mach-imx/cpufreq.c
@@ -32,6 +32,8 @@
#include <linux/types.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
+#include <linux/clk.h>
+#include <linux/err.h>
#include <asm/system.h>
#include <asm/hardware.h>
@@ -52,6 +54,8 @@
static u32 mpctl0_at_boot;
static u32 bclk_div_at_boot;
+static struct clk *system_clk, *mcu_clk;
+
static void imx_set_async_mode(void)
{
adjust_cr(CR_920T_CLOCK_MODE, CR_920T_ASYNC_MODE);
@@ -160,10 +164,10 @@ static unsigned int imx_get_speed(unsigned int cpu)
cr = get_cr();
if((cr & CR_920T_CLOCK_MODE) == CR_920T_FASTBUS_MODE) {
- freq = imx_get_system_clk();
+ freq = clk_get_rate(system_clk);
freq = (freq + bclk_div/2) / bclk_div;
} else {
- freq = imx_get_mcu_clk();
+ freq = clk_get_rate(mcu_clk);
if (cscr & CSCR_MPU_PRESC)
freq /= 2;
}
@@ -201,7 +205,7 @@ static int imx_set_target(struct cpufreq_policy *policy,
pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n",
freq, mpctl0_at_boot);
- sysclk = imx_get_system_clk();
+ sysclk = clk_get_rate(system_clk);
if (freq > sysclk / bclk_div_at_boot + 1000000) {
freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, CLK32 * 512, freq, relation);
@@ -290,6 +294,16 @@ static int __init imx_cpufreq_init(void)
bclk_div_at_boot = __mfld2val(CSCR_BCLK_DIV, CSCR) + 1;
mpctl0_at_boot = 0;
+ system_clk = clk_get(NULL, "system_clk");
+ if (IS_ERR(system_clk))
+ return PTR_ERR(system_clk);
+
+ mcu_clk = clk_get(NULL, "mcu_clk");
+ if (IS_ERR(mcu_clk)) {
+ clk_put(system_clk);
+ return PTR_ERR(mcu_clk);
+ }
+
if((CSCR & CSCR_MPEN) &&
((get_cr() & CR_920T_CLOCK_MODE) != CR_920T_FASTBUS_MODE))
mpctl0_at_boot = MPCTL0;
diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c
index a59ff2987cb7..ee1c6f06ff64 100644
--- a/arch/arm/mach-imx/dma.c
+++ b/arch/arm/mach-imx/dma.c
@@ -410,7 +410,6 @@ void imx_dma_free(imx_dmach_t dma_ch)
/**
* imx_dma_request_by_prio - find and request some of free channels best suiting requested priority
- * @dma_ch: i.MX DMA channel number
* @name: the driver/caller own non-%NULL identification
* @prio: one of the hardware distinguished priority level:
* %DMA_PRIO_HIGH, %DMA_PRIO_MEDIUM, %DMA_PRIO_LOW
@@ -420,11 +419,9 @@ void imx_dma_free(imx_dmach_t dma_ch)
* in the higher and then even lower priority groups.
*
* Return value: If there is no free channel to allocate, -%ENODEV is returned.
- * Zero value indicates successful channel allocation.
+ * On successful allocation channel is returned.
*/
-int
-imx_dma_request_by_prio(imx_dmach_t * pdma_ch, const char *name,
- imx_dma_prio prio)
+imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio)
{
int i;
int best;
@@ -444,15 +441,13 @@ imx_dma_request_by_prio(imx_dmach_t * pdma_ch, const char *name,
for (i = best; i < IMX_DMA_CHANNELS; i++) {
if (!imx_dma_request(i, name)) {
- *pdma_ch = i;
- return 0;
+ return i;
}
}
for (i = best - 1; i >= 0; i--) {
if (!imx_dma_request(i, name)) {
- *pdma_ch = i;
- return 0;
+ return i;
}
}
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index 4cfc9d3af28a..98ddd8a6d05f 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -214,82 +214,6 @@ int imx_irq_to_gpio(unsigned irq)
EXPORT_SYMBOL(imx_irq_to_gpio);
-/*
- * get the system pll clock in Hz
- *
- * mfi + mfn / (mfd +1)
- * f = 2 * f_ref * --------------------
- * pd + 1
- */
-static unsigned int imx_decode_pll(unsigned int pll, u32 f_ref)
-{
- unsigned long long ll;
- unsigned long quot;
-
- u32 mfi = (pll >> 10) & 0xf;
- u32 mfn = pll & 0x3ff;
- u32 mfd = (pll >> 16) & 0x3ff;
- u32 pd = (pll >> 26) & 0xf;
-
- mfi = mfi <= 5 ? 5 : mfi;
-
- ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) );
- quot = (pd+1) * (1<<16);
- ll += quot / 2;
- do_div(ll, quot);
- return (unsigned int) ll;
-}
-
-unsigned int imx_get_system_clk(void)
-{
- u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512);
-
- return imx_decode_pll(SPCTL0, f_ref);
-}
-EXPORT_SYMBOL(imx_get_system_clk);
-
-unsigned int imx_get_mcu_clk(void)
-{
- return imx_decode_pll(MPCTL0, CLK32 * 512);
-}
-EXPORT_SYMBOL(imx_get_mcu_clk);
-
-/*
- * get peripheral clock 1 ( UART[12], Timer[12], PWM )
- */
-unsigned int imx_get_perclk1(void)
-{
- return imx_get_system_clk() / (((PCDR) & 0xf)+1);
-}
-EXPORT_SYMBOL(imx_get_perclk1);
-
-/*
- * get peripheral clock 2 ( LCD, SD, SPI[12] )
- */
-unsigned int imx_get_perclk2(void)
-{
- return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1);
-}
-EXPORT_SYMBOL(imx_get_perclk2);
-
-/*
- * get peripheral clock 3 ( SSI )
- */
-unsigned int imx_get_perclk3(void)
-{
- return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1);
-}
-EXPORT_SYMBOL(imx_get_perclk3);
-
-/*
- * get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
- */
-unsigned int imx_get_hclk(void)
-{
- return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1);
-}
-EXPORT_SYMBOL(imx_get_hclk);
-
static struct resource imx_mmc_resources[] = {
[0] = {
.start = 0x00214000,
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
index a9778c1587ab..9635d5812bcd 100644
--- a/arch/arm/mach-imx/mx1ads.c
+++ b/arch/arm/mach-imx/mx1ads.c
@@ -69,6 +69,11 @@ static struct resource imx_uart1_resources[] = {
.end = (UART1_MINT_TX),
.flags = IORESOURCE_IRQ,
},
+ [3] = {
+ .start = UART1_MINT_RTS,
+ .end = UART1_MINT_RTS,
+ .flags = IORESOURCE_IRQ,
+ },
};
static struct platform_device imx_uart1_device = {
@@ -97,6 +102,11 @@ static struct resource imx_uart2_resources[] = {
.end = (UART2_MINT_TX),
.flags = IORESOURCE_IRQ,
},
+ [3] = {
+ .start = UART2_MINT_RTS,
+ .end = UART2_MINT_RTS,
+ .flags = IORESOURCE_IRQ,
+ },
};
static struct platform_device imx_uart2_device = {
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index d86d124aea22..5a41e96e8586 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -17,6 +17,7 @@
#include <linux/time.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
+#include <linux/clk.h>
#include <asm/hardware.h>
#include <asm/io.h>
@@ -86,10 +87,10 @@ static struct clocksource clocksource_imx = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-static int __init imx_clocksource_init(void)
+static int __init imx_clocksource_init(unsigned long rate)
{
clocksource_imx.mult =
- clocksource_hz2mult(imx_get_perclk1(), clocksource_imx.shift);
+ clocksource_hz2mult(rate, clocksource_imx.shift);
clocksource_register(&clocksource_imx);
return 0;
@@ -174,9 +175,9 @@ static struct clock_event_device clockevent_imx = {
.rating = 200,
};
-static int __init imx_clockevent_init(void)
+static int __init imx_clockevent_init(unsigned long rate)
{
- clockevent_imx.mult = div_sc(imx_get_perclk1(), NSEC_PER_SEC,
+ clockevent_imx.mult = div_sc(rate, NSEC_PER_SEC,
clockevent_imx.shift);
clockevent_imx.max_delta_ns =
clockevent_delta2ns(0xfffffffe, &clockevent_imx);
@@ -190,13 +191,23 @@ static int __init imx_clockevent_init(void)
return 0;
}
+extern int imx_clocks_init(void);
static void __init imx_timer_init(void)
{
+ struct clk *clk;
+ unsigned long rate;
+
+ imx_clocks_init();
+
+ clk = clk_get(NULL, "perclk1");
+ clk_enable(clk);
+ rate = clk_get_rate(clk);
+
imx_timer_hardware_init();
- imx_clocksource_init();
+ imx_clocksource_init(rate);
- imx_clockevent_init();
+ imx_clockevent_init(rate);
/*
* Make irqs happen for the system timer
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
index 158daaf9e3b0..6a5ef8d30b10 100644
--- a/arch/arm/mach-integrator/Makefile
+++ b/arch/arm/mach-integrator/Makefile
@@ -4,7 +4,7 @@
# Object file lists.
-obj-y := clock.o core.o lm.o time.o
+obj-y := clock.o core.o lm.o
obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o
obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o
diff --git a/arch/arm/mach-integrator/time.c b/arch/arm/mach-integrator/time.c
deleted file mode 100644
index 8508a0db3eaf..000000000000
--- a/arch/arm/mach-integrator/time.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * linux/arch/arm/mach-integrator/time.c
- *
- * Copyright (C) 2000-2001 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <linux/mc146818rtc.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/rtc.h>
-
-#include <asm/mach/time.h>
-
-#define RTC_DR (0)
-#define RTC_MR (4)
-#define RTC_STAT (8)
-#define RTC_EOI (8)
-#define RTC_LR (12)
-#define RTC_CR (16)
-#define RTC_CR_MIE (1 << 0)
-
-extern int (*set_rtc)(void);
-static void __iomem *rtc_base;
-
-static int integrator_set_rtc(void)
-{
- __raw_writel(xtime.tv_sec, rtc_base + RTC_LR);
- return 1;
-}
-
-static int integrator_rtc_read_alarm(struct rtc_wkalrm *alrm)
-{
- rtc_time_to_tm(readl(rtc_base + RTC_MR), &alrm->time);
- return 0;
-}
-
-static inline int integrator_rtc_set_alarm(struct rtc_wkalrm *alrm)
-{
- unsigned long time;
- int ret;
-
- /*
- * At the moment, we can only deal with non-wildcarded alarm times.
- */
- ret = rtc_valid_tm(&alrm->time);
- if (ret == 0)
- ret = rtc_tm_to_time(&alrm->time, &time);
- if (ret == 0)
- writel(time, rtc_base + RTC_MR);
- return ret;
-}
-
-static int integrator_rtc_read_time(struct rtc_time *tm)
-{
- rtc_time_to_tm(readl(rtc_base + RTC_DR), tm);
- return 0;
-}
-
-/*
- * Set the RTC time. Unfortunately, we can't accurately set
- * the point at which the counter updates.
- *
- * Also, since RTC_LR is transferred to RTC_CR on next rising
- * edge of the 1Hz clock, we must write the time one second
- * in advance.
- */
-static inline int integrator_rtc_set_time(struct rtc_time *tm)
-{
- unsigned long time;
- int ret;
-
- ret = rtc_tm_to_time(tm, &time);
- if (ret == 0)
- writel(time + 1, rtc_base + RTC_LR);
-
- return ret;
-}
-
-static struct rtc_ops rtc_ops = {
- .owner = THIS_MODULE,
- .read_time = integrator_rtc_read_time,
- .set_time = integrator_rtc_set_time,
- .read_alarm = integrator_rtc_read_alarm,
- .set_alarm = integrator_rtc_set_alarm,
-};
-
-static irqreturn_t arm_rtc_interrupt(int irq, void *dev_id)
-{
- writel(0, rtc_base + RTC_EOI);
- return IRQ_HANDLED;
-}
-
-static int rtc_probe(struct amba_device *dev, void *id)
-{
- int ret;
-
- if (rtc_base)
- return -EBUSY;
-
- ret = amba_request_regions(dev, NULL);
- if (ret)
- goto out;
-
- rtc_base = ioremap(dev->res.start, SZ_4K);
- if (!rtc_base) {
- ret = -ENOMEM;
- goto res_out;
- }
-
- __raw_writel(0, rtc_base + RTC_CR);
- __raw_writel(0, rtc_base + RTC_EOI);
-
- xtime.tv_sec = __raw_readl(rtc_base + RTC_DR);
-
- /* note that 'dev' is merely used for irq disambiguation;
- * it is not actually referenced in the irq handler
- */
- ret = request_irq(dev->irq[0], arm_rtc_interrupt, IRQF_DISABLED,
- "rtc-pl030", dev);
- if (ret)
- goto map_out;
-
- ret = register_rtc(&rtc_ops);
- if (ret)
- goto irq_out;
-
- set_rtc = integrator_set_rtc;
- return 0;
-
- irq_out:
- free_irq(dev->irq[0], dev);
- map_out:
- iounmap(rtc_base);
- rtc_base = NULL;
- res_out:
- amba_release_regions(dev);
- out:
- return ret;
-}
-
-static int rtc_remove(struct amba_device *dev)
-{
- set_rtc = NULL;
-
- writel(0, rtc_base + RTC_CR);
-
- free_irq(dev->irq[0], dev);
- unregister_rtc(&rtc_ops);
-
- iounmap(rtc_base);
- rtc_base = NULL;
- amba_release_regions(dev);
-
- return 0;
-}
-
-static struct timespec rtc_delta;
-
-static int rtc_suspend(struct amba_device *dev, pm_message_t state)
-{
- struct timespec rtc;
-
- rtc.tv_sec = readl(rtc_base + RTC_DR);
- rtc.tv_nsec = 0;
- save_time_delta(&rtc_delta, &rtc);
-
- return 0;
-}
-
-static int rtc_resume(struct amba_device *dev)
-{
- struct timespec rtc;
-
- rtc.tv_sec = readl(rtc_base + RTC_DR);
- rtc.tv_nsec = 0;
- restore_time_delta(&rtc_delta, &rtc);
-
- return 0;
-}
-
-static struct amba_id rtc_ids[] = {
- {
- .id = 0x00041030,
- .mask = 0x000fffff,
- },
- { 0, 0 },
-};
-
-static struct amba_driver rtc_driver = {
- .drv = {
- .name = "rtc-pl030",
- },
- .probe = rtc_probe,
- .remove = rtc_remove,
- .suspend = rtc_suspend,
- .resume = rtc_resume,
- .id_table = rtc_ids,
-};
-
-static int __init integrator_rtc_init(void)
-{
- return amba_driver_register(&rtc_driver);
-}
-
-static void __exit integrator_rtc_exit(void)
-{
- amba_driver_unregister(&rtc_driver);
-}
-
-module_init(integrator_rtc_init);
-module_exit(integrator_rtc_exit);
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index e774447c0592..db8b5fe06c0d 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -125,6 +125,15 @@ config ARCH_IXDP4XX
depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
default y
+config MACH_FSG
+ bool
+ prompt "Freecom FSG-3"
+ select PCI
+ help
+ Say 'Y' here if you want your kernel to support Freecom's
+ FSG-3 device. For more information on this platform,
+ see http://www.nslu2-linux.org/wiki/FSG3/HomePage
+
#
# Certain registers and IRQs are only enabled if supporting IXP465 CPUs
#
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index c1956882c48b..2e6bbf927a74 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
+obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
obj-y += common.o
@@ -28,6 +29,7 @@ obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o
obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o
obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
+obj-$(CONFIG_MACH_FSG) += fsg-setup.o
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index f6d66dce6852..3781b3db9f49 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -326,11 +326,11 @@ static struct resource ixp4xx_udc_resources[] = {
};
/*
- * USB device controller. The IXP4xx uses the same controller as PXA2XX,
+ * USB device controller. The IXP4xx uses the same controller as PXA25X,
* so we just use the same device.
*/
static struct platform_device ixp4xx_udc_device = {
- .name = "pxa2xx-udc",
+ .name = "pxa25x-udc",
.id = -1,
.num_resources = 2,
.resource = ixp4xx_udc_resources,
diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c
new file mode 100644
index 000000000000..f19f3f6feda1
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/fsg-pci.c
@@ -0,0 +1,71 @@
+/*
+ * arch/arch/mach-ixp4xx/fsg-pci.c
+ *
+ * FSG board-level PCI initialization
+ *
+ * Author: Rod Whitby <rod@whitby.id.au>
+ * Maintainer: http://www.nslu2-linux.org/
+ *
+ * based on ixdp425-pci.c:
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+
+void __init fsg_pci_preinit(void)
+{
+ set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW);
+ set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW);
+ set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW);
+
+ ixp4xx_pci_preinit();
+}
+
+static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ static int pci_irq_table[FSG_PCI_IRQ_LINES] = {
+ IRQ_FSG_PCI_INTC,
+ IRQ_FSG_PCI_INTB,
+ IRQ_FSG_PCI_INTA,
+ };
+
+ int irq = -1;
+ slot = slot - 11;
+
+ if (slot >= 1 && slot <= FSG_PCI_MAX_DEV &&
+ pin >= 1 && pin <= FSG_PCI_IRQ_LINES)
+ irq = pci_irq_table[(slot - 1)];
+ printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n",
+ __func__, slot, pin, irq);
+
+ return irq;
+}
+
+struct hw_pci fsg_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = fsg_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = ixp4xx_setup,
+ .scan = ixp4xx_scan_bus,
+ .map_irq = fsg_map_irq,
+};
+
+int __init fsg_pci_init(void)
+{
+ if (machine_is_fsg())
+ pci_common_init(&fsg_pci);
+ return 0;
+}
+
+subsys_initcall(fsg_pci_init);
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
new file mode 100644
index 000000000000..0db3a909ae61
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -0,0 +1,276 @@
+/*
+ * arch/arm/mach-ixp4xx/fsg-setup.c
+ *
+ * FSG board-setup
+ *
+ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
+ *
+ * based on ixdp425-setup.c:
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * based on nslu2-power.c
+ * Copyright (C) 2005 Tower Technologies
+ *
+ * Author: Rod Whitby <rod@whitby.id.au>
+ * Maintainers: http://www.nslu2-linux.org/
+ *
+ */
+
+#include <linux/if_ether.h>
+#include <linux/irq.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/leds.h>
+#include <linux/reboot.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+static struct flash_platform_data fsg_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+};
+
+static struct resource fsg_flash_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device fsg_flash = {
+ .name = "IXP4XX-Flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &fsg_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &fsg_flash_resource,
+};
+
+static struct i2c_gpio_platform_data fsg_i2c_gpio_data = {
+ .sda_pin = FSG_SDA_PIN,
+ .scl_pin = FSG_SCL_PIN,
+};
+
+static struct platform_device fsg_i2c_gpio = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &fsg_i2c_gpio_data,
+ },
+};
+
+static struct i2c_board_info __initdata fsg_i2c_board_info [] = {
+ {
+ I2C_BOARD_INFO("rtc-isl1208", 0x6f),
+ },
+};
+
+static struct resource fsg_uart_resources[] = {
+ {
+ .start = IXP4XX_UART1_BASE_PHYS,
+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IXP4XX_UART2_BASE_PHYS,
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct plat_serial8250_port fsg_uart_data[] = {
+ {
+ .mapbase = IXP4XX_UART1_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ {
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ { }
+};
+
+static struct platform_device fsg_uart = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = fsg_uart_data,
+ },
+ .num_resources = ARRAY_SIZE(fsg_uart_resources),
+ .resource = fsg_uart_resources,
+};
+
+static struct platform_device fsg_leds = {
+ .name = "fsg-led",
+ .id = -1,
+};
+
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info fsg_plat_eth[] = {
+ {
+ .phy = 5,
+ .rxq = 3,
+ .txreadyq = 20,
+ }, {
+ .phy = 4,
+ .rxq = 4,
+ .txreadyq = 21,
+ }
+};
+
+static struct platform_device fsg_eth[] = {
+ {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEB,
+ .dev = {
+ .platform_data = fsg_plat_eth,
+ },
+ }, {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEC,
+ .dev = {
+ .platform_data = fsg_plat_eth + 1,
+ },
+ }
+};
+
+static struct platform_device *fsg_devices[] __initdata = {
+ &fsg_i2c_gpio,
+ &fsg_flash,
+ &fsg_leds,
+ &fsg_eth[0],
+ &fsg_eth[1],
+};
+
+static irqreturn_t fsg_power_handler(int irq, void *dev_id)
+{
+ /* Signal init to do the ctrlaltdel action, this will bypass init if
+ * it hasn't started and do a kernel_restart.
+ */
+ ctrl_alt_del();
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t fsg_reset_handler(int irq, void *dev_id)
+{
+ /* This is the paper-clip reset which does an emergency reboot. */
+ printk(KERN_INFO "Restarting system.\n");
+ machine_restart(NULL);
+
+ /* This should never be reached. */
+ return IRQ_HANDLED;
+}
+
+static void __init fsg_init(void)
+{
+ DECLARE_MAC_BUF(mac_buf);
+ uint8_t __iomem *f;
+ int i;
+
+ ixp4xx_sys_init();
+
+ fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ fsg_flash_resource.end =
+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+ /* Configure CS2 for operation, 8bit and writable */
+ *IXP4XX_EXP_CS2 = 0xbfff0002;
+
+ i2c_register_board_info(0, fsg_i2c_board_info,
+ ARRAY_SIZE(fsg_i2c_board_info));
+
+ /* This is only useful on a modified machine, but it is valuable
+ * to have it first in order to see debug messages, and so that
+ * it does *not* get removed if platform_add_devices fails!
+ */
+ (void)platform_device_register(&fsg_uart);
+
+ platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices));
+
+ if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler,
+ IRQF_DISABLED | IRQF_TRIGGER_LOW,
+ "FSG reset button", NULL) < 0) {
+
+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+ gpio_to_irq(FSG_RB_GPIO));
+ }
+
+ if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler,
+ IRQF_DISABLED | IRQF_TRIGGER_LOW,
+ "FSG power button", NULL) < 0) {
+
+ printk(KERN_DEBUG "Power Button IRQ %d not available\n",
+ gpio_to_irq(FSG_SB_GPIO));
+ }
+
+ /*
+ * Map in a portion of the flash and read the MAC addresses.
+ * Since it is stored in BE in the flash itself, we need to
+ * byteswap it if we're in LE mode.
+ */
+ f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000);
+ if (f) {
+#ifdef __ARMEB__
+ for (i = 0; i < 6; i++) {
+ fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i);
+ fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i);
+ }
+#else
+
+ /*
+ Endian-swapped reads from unaligned addresses are
+ required to extract the two MACs from the big-endian
+ Redboot config area in flash.
+ */
+
+ fsg_plat_eth[0].hwaddr[0] = readb(f + 0x3C0421);
+ fsg_plat_eth[0].hwaddr[1] = readb(f + 0x3C0420);
+ fsg_plat_eth[0].hwaddr[2] = readb(f + 0x3C0427);
+ fsg_plat_eth[0].hwaddr[3] = readb(f + 0x3C0426);
+ fsg_plat_eth[0].hwaddr[4] = readb(f + 0x3C0425);
+ fsg_plat_eth[0].hwaddr[5] = readb(f + 0x3C0424);
+
+ fsg_plat_eth[1].hwaddr[0] = readb(f + 0x3C0439);
+ fsg_plat_eth[1].hwaddr[1] = readb(f + 0x3C043F);
+ fsg_plat_eth[1].hwaddr[2] = readb(f + 0x3C043E);
+ fsg_plat_eth[1].hwaddr[3] = readb(f + 0x3C043D);
+ fsg_plat_eth[1].hwaddr[4] = readb(f + 0x3C043C);
+ fsg_plat_eth[1].hwaddr[5] = readb(f + 0x3C0443);
+#endif
+ iounmap(f);
+ }
+ printk(KERN_INFO "FSG: Using MAC address %s for port 0\n",
+ print_mac(mac_buf, fsg_plat_eth[0].hwaddr));
+ printk(KERN_INFO "FSG: Using MAC address %s for port 1\n",
+ print_mac(mac_buf, fsg_plat_eth[1].hwaddr));
+
+}
+
+MACHINE_START(FSG, "Freecom FSG-3")
+ /* Maintainer: www.nslu2-linux.org */
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .boot_params = 0x0100,
+ .init_machine = fsg_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
new file mode 100644
index 000000000000..3600cd9f0519
--- /dev/null
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -0,0 +1,25 @@
+if ARCH_KIRKWOOD
+
+menu "Marvell Kirkwood Implementations"
+
+config MACH_DB88F6281_BP
+ bool "Marvell DB-88F6281-BP Development Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell DB-88F6281-BP Development Board.
+
+config MACH_RD88F6192_NAS
+ bool "Marvell RD-88F6192-NAS Reference Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell RD-88F6192-NAS Reference Board.
+
+config MACH_RD88F6281
+ bool "Marvell RD-88F6281 Reference Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell RD-88F6281 Reference Board.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
new file mode 100644
index 000000000000..e14bf40bfb07
--- /dev/null
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -0,0 +1,5 @@
+obj-y += common.o addr-map.o irq.o pcie.o
+
+obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o
+obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
+obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6281-setup.o
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
new file mode 100644
index 000000000000..67039c3e0c48
--- /dev/null
+++ b/arch/arm/mach-kirkwood/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
new file mode 100644
index 000000000000..a39f0f3c4730
--- /dev/null
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -0,0 +1,139 @@
+/*
+ * arch/arm/mach-kirkwood/addr-map.c
+ *
+ * Address map functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/hardware.h>
+#include "common.h"
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define TARGET_DDR 0
+#define TARGET_DEV_BUS 1
+#define TARGET_PCIE 4
+#define ATTR_DEV_SPI_ROM 0x1e
+#define ATTR_DEV_BOOT 0x1d
+#define ATTR_DEV_NAND 0x2f
+#define ATTR_DEV_CS3 0x37
+#define ATTR_DEV_CS2 0x3b
+#define ATTR_DEV_CS1 0x3d
+#define ATTR_DEV_CS0 0x3e
+#define ATTR_PCIE_IO 0xe0
+#define ATTR_PCIE_MEM 0xe8
+
+/*
+ * Helpers to get DDR bank info
+ */
+#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3))
+#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3))
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define WIN_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
+#define WIN_CTRL_OFF 0x0000
+#define WIN_BASE_OFF 0x0004
+#define WIN_REMAP_LO_OFF 0x0008
+#define WIN_REMAP_HI_OFF 0x000c
+
+
+struct mbus_dram_target_info kirkwood_mbus_dram_info;
+
+static int __init cpu_win_can_remap(int win)
+{
+ if (win < 4)
+ return 1;
+
+ return 0;
+}
+
+static void __init setup_cpu_win(int win, u32 base, u32 size,
+ u8 target, u8 attr, int remap)
+{
+ void __iomem *addr = (void __iomem *)WIN_OFF(win);
+ u32 ctrl;
+
+ base &= 0xffff0000;
+ ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
+
+ writel(base, addr + WIN_BASE_OFF);
+ writel(ctrl, addr + WIN_CTRL_OFF);
+ if (cpu_win_can_remap(win)) {
+ if (remap < 0)
+ remap = base;
+
+ writel(remap & 0xffff0000, addr + WIN_REMAP_LO_OFF);
+ writel(0, addr + WIN_REMAP_HI_OFF);
+ }
+}
+
+void __init kirkwood_setup_cpu_mbus(void)
+{
+ void __iomem *addr;
+ int i;
+ int cs;
+
+ /*
+ * First, disable and clear windows.
+ */
+ for (i = 0; i < 8; i++) {
+ addr = (void __iomem *)WIN_OFF(i);
+
+ writel(0, addr + WIN_BASE_OFF);
+ writel(0, addr + WIN_CTRL_OFF);
+ if (cpu_win_can_remap(i)) {
+ writel(0, addr + WIN_REMAP_LO_OFF);
+ writel(0, addr + WIN_REMAP_HI_OFF);
+ }
+ }
+
+ /*
+ * Setup windows for PCIe IO+MEM space.
+ */
+ setup_cpu_win(0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE,
+ TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE);
+ setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
+ TARGET_PCIE, ATTR_PCIE_MEM, -1);
+
+ /*
+ * Setup window for NAND controller.
+ */
+ setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
+ TARGET_DEV_BUS, ATTR_DEV_NAND, -1);
+
+ /*
+ * Setup MBUS dram target info.
+ */
+ kirkwood_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+ addr = (void __iomem *)DDR_WINDOW_CPU_BASE;
+
+ for (i = 0, cs = 0; i < 4; i++) {
+ u32 base = readl(addr + DDR_BASE_CS_OFF(i));
+ u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
+
+ /*
+ * Chip select enabled?
+ */
+ if (size & 1) {
+ struct mbus_dram_window *w;
+
+ w = &kirkwood_mbus_dram_info.cs[cs++];
+ w->cs_index = i;
+ w->mbus_attr = 0xf & ~(1 << i);
+ w->base = base & 0xffff0000;
+ w->size = (size | 0x0000ffff) + 1;
+ }
+ }
+ kirkwood_mbus_dram_info.num_cs = cs;
+}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
new file mode 100644
index 000000000000..5938a3b33cdc
--- /dev/null
+++ b/arch/arm/mach-kirkwood/common.c
@@ -0,0 +1,331 @@
+/*
+ * arch/arm/mach-kirkwood/common.c
+ *
+ * Core functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/mbus.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <asm/page.h>
+#include <asm/timex.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/plat-orion/cache-feroceon-l2.h>
+#include <asm/plat-orion/ehci-orion.h>
+#include <asm/plat-orion/orion_nand.h>
+#include <asm/plat-orion/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc kirkwood_io_desc[] __initdata = {
+ {
+ .virtual = KIRKWOOD_PCIE_IO_VIRT_BASE,
+ .pfn = __phys_to_pfn(KIRKWOOD_PCIE_IO_PHYS_BASE),
+ .length = KIRKWOOD_PCIE_IO_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = KIRKWOOD_REGS_VIRT_BASE,
+ .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
+ .length = KIRKWOOD_REGS_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init kirkwood_map_io(void)
+{
+ iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
+}
+
+
+/*****************************************************************************
+ * EHCI
+ ****************************************************************************/
+static struct orion_ehci_data kirkwood_ehci_data = {
+ .dram = &kirkwood_mbus_dram_info,
+};
+
+static u64 ehci_dmamask = 0xffffffffUL;
+
+
+/*****************************************************************************
+ * EHCI0
+ ****************************************************************************/
+static struct resource kirkwood_ehci_resources[] = {
+ {
+ .start = USB_PHYS_BASE,
+ .end = USB_PHYS_BASE + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_KIRKWOOD_USB,
+ .end = IRQ_KIRKWOOD_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device kirkwood_ehci = {
+ .name = "orion-ehci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &kirkwood_ehci_data,
+ },
+ .resource = kirkwood_ehci_resources,
+ .num_resources = ARRAY_SIZE(kirkwood_ehci_resources),
+};
+
+void __init kirkwood_ehci_init(void)
+{
+ platform_device_register(&kirkwood_ehci);
+}
+
+
+/*****************************************************************************
+ * GE00
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data kirkwood_ge00_shared_data = {
+ .t_clk = KIRKWOOD_TCLK,
+ .dram = &kirkwood_mbus_dram_info,
+};
+
+static struct resource kirkwood_ge00_shared_resources[] = {
+ {
+ .name = "ge00 base",
+ .start = GE00_PHYS_BASE + 0x2000,
+ .end = GE00_PHYS_BASE + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device kirkwood_ge00_shared = {
+ .name = MV643XX_ETH_SHARED_NAME,
+ .id = 0,
+ .dev = {
+ .platform_data = &kirkwood_ge00_shared_data,
+ },
+ .num_resources = 1,
+ .resource = kirkwood_ge00_shared_resources,
+};
+
+static struct resource kirkwood_ge00_resources[] = {
+ {
+ .name = "ge00 irq",
+ .start = IRQ_KIRKWOOD_GE00_SUM,
+ .end = IRQ_KIRKWOOD_GE00_SUM,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device kirkwood_ge00 = {
+ .name = MV643XX_ETH_NAME,
+ .id = 0,
+ .num_resources = 1,
+ .resource = kirkwood_ge00_resources,
+};
+
+void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
+{
+ eth_data->shared = &kirkwood_ge00_shared;
+ kirkwood_ge00.dev.platform_data = eth_data;
+
+ platform_device_register(&kirkwood_ge00_shared);
+ platform_device_register(&kirkwood_ge00);
+}
+
+
+/*****************************************************************************
+ * SoC RTC
+ ****************************************************************************/
+static struct resource kirkwood_rtc_resource = {
+ .start = RTC_PHYS_BASE,
+ .end = RTC_PHYS_BASE + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+void __init kirkwood_rtc_init(void)
+{
+ platform_device_register_simple("rtc-mv", -1, &kirkwood_rtc_resource, 1);
+}
+
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct resource kirkwood_sata_resources[] = {
+ {
+ .name = "sata base",
+ .start = SATA_PHYS_BASE,
+ .end = SATA_PHYS_BASE + 0x5000 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "sata irq",
+ .start = IRQ_KIRKWOOD_SATA,
+ .end = IRQ_KIRKWOOD_SATA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device kirkwood_sata = {
+ .name = "sata_mv",
+ .id = 0,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(kirkwood_sata_resources),
+ .resource = kirkwood_sata_resources,
+};
+
+void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
+{
+ sata_data->dram = &kirkwood_mbus_dram_info;
+ kirkwood_sata.dev.platform_data = sata_data;
+ platform_device_register(&kirkwood_sata);
+}
+
+
+/*****************************************************************************
+ * UART0
+ ****************************************************************************/
+static struct plat_serial8250_port kirkwood_uart0_data[] = {
+ {
+ .mapbase = UART0_PHYS_BASE,
+ .membase = (char *)UART0_VIRT_BASE,
+ .irq = IRQ_KIRKWOOD_UART_0,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = KIRKWOOD_TCLK,
+ }, {
+ },
+};
+
+static struct resource kirkwood_uart0_resources[] = {
+ {
+ .start = UART0_PHYS_BASE,
+ .end = UART0_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_KIRKWOOD_UART_0,
+ .end = IRQ_KIRKWOOD_UART_0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device kirkwood_uart0 = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = kirkwood_uart0_data,
+ },
+ .resource = kirkwood_uart0_resources,
+ .num_resources = ARRAY_SIZE(kirkwood_uart0_resources),
+};
+
+void __init kirkwood_uart0_init(void)
+{
+ platform_device_register(&kirkwood_uart0);
+}
+
+
+/*****************************************************************************
+ * UART1
+ ****************************************************************************/
+static struct plat_serial8250_port kirkwood_uart1_data[] = {
+ {
+ .mapbase = UART1_PHYS_BASE,
+ .membase = (char *)UART1_VIRT_BASE,
+ .irq = IRQ_KIRKWOOD_UART_1,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = KIRKWOOD_TCLK,
+ }, {
+ },
+};
+
+static struct resource kirkwood_uart1_resources[] = {
+ {
+ .start = UART1_PHYS_BASE,
+ .end = UART1_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_KIRKWOOD_UART_1,
+ .end = IRQ_KIRKWOOD_UART_1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device kirkwood_uart1 = {
+ .name = "serial8250",
+ .id = 1,
+ .dev = {
+ .platform_data = kirkwood_uart1_data,
+ },
+ .resource = kirkwood_uart1_resources,
+ .num_resources = ARRAY_SIZE(kirkwood_uart1_resources),
+};
+
+void __init kirkwood_uart1_init(void)
+{
+ platform_device_register(&kirkwood_uart1);
+}
+
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+static void kirkwood_timer_init(void)
+{
+ orion_time_init(IRQ_KIRKWOOD_BRIDGE, KIRKWOOD_TCLK);
+}
+
+struct sys_timer kirkwood_timer = {
+ .init = kirkwood_timer_init,
+};
+
+
+/*****************************************************************************
+ * General
+ ****************************************************************************/
+static char * __init kirkwood_id(void)
+{
+ switch (readl(DEVICE_ID) & 0x3) {
+ case 0:
+ return "88F6180";
+ case 1:
+ return "88F6192";
+ case 2:
+ return "88F6281";
+ }
+
+ return "unknown 88F6000 variant";
+}
+
+static int __init is_l2_writethrough(void)
+{
+ return !!(readl(L2_CONFIG_REG) & L2_WRITETHROUGH);
+}
+
+void __init kirkwood_init(void)
+{
+ printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n",
+ kirkwood_id(), KIRKWOOD_TCLK);
+
+ kirkwood_setup_cpu_mbus();
+
+#ifdef CONFIG_CACHE_FEROCEON_L2
+ feroceon_l2_init(is_l2_writethrough());
+#endif
+}
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
new file mode 100644
index 000000000000..5dee2f6b40a5
--- /dev/null
+++ b/arch/arm/mach-kirkwood/common.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-kirkwood/common.h
+ *
+ * Core functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_KIRKWOOD_COMMON_H
+#define __ARCH_KIRKWOOD_COMMON_H
+
+struct mv643xx_eth_platform_data;
+struct mv_sata_platform_data;
+
+/*
+ * Basic Kirkwood init functions used early by machine-setup.
+ */
+void kirkwood_map_io(void);
+void kirkwood_init(void);
+void kirkwood_init_irq(void);
+
+extern struct mbus_dram_target_info kirkwood_mbus_dram_info;
+void kirkwood_setup_cpu_mbus(void);
+void kirkwood_setup_pcie_io_win(int window, u32 base, u32 size,
+ int maj, int min);
+void kirkwood_setup_pcie_mem_win(int window, u32 base, u32 size,
+ int maj, int min);
+
+void kirkwood_ehci_init(void);
+void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void kirkwood_pcie_init(void);
+void kirkwood_rtc_init(void);
+void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
+void kirkwood_uart0_init(void);
+void kirkwood_uart1_init(void);
+
+extern struct sys_timer kirkwood_timer;
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
new file mode 100644
index 000000000000..d5c482c628e3
--- /dev/null
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+ *
+ * Marvell DB-88F6281-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/kirkwood.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
+ .phy_addr = 8,
+};
+
+static struct mv_sata_platform_data db88f6281_sata_data = {
+ .n_ports = 2,
+};
+
+static void __init db88f6281_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&db88f6281_ge00_data);
+ kirkwood_rtc_init();
+ kirkwood_sata_init(&db88f6281_sata_data);
+ kirkwood_uart0_init();
+ kirkwood_uart1_init();
+}
+
+static int __init db88f6281_pci_init(void)
+{
+ if (machine_is_db88f6281_bp())
+ kirkwood_pcie_init();
+
+ return 0;
+}
+subsys_initcall(db88f6281_pci_init);
+
+MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
+ /* Maintainer: Saeed Bishara <saeed@marvell.com> */
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = db88f6281_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
new file mode 100644
index 000000000000..302bb2cf6669
--- /dev/null
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-kirkwood/irq.c
+ *
+ * Kirkwood IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/plat-orion/irq.h>
+#include "common.h"
+
+void __init kirkwood_init_irq(void)
+{
+ orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
+ orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+}
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
new file mode 100644
index 000000000000..8282d0ff84bf
--- /dev/null
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -0,0 +1,180 @@
+/*
+ * arch/arm/mach-kirkwood/pcie.c
+ *
+ * PCIe functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mbus.h>
+#include <asm/mach/pci.h>
+#include <asm/plat-orion/pcie.h>
+#include "common.h"
+
+
+#define PCIE_BASE ((void __iomem *)PCIE_VIRT_BASE)
+
+static int pcie_valid_config(int bus, int dev)
+{
+ /*
+ * Don't go out when trying to access --
+ * 1. nonexisting device on local bus
+ * 2. where there's no device connected (no link)
+ */
+ if (bus == 0 && dev == 0)
+ return 1;
+
+ if (!orion_pcie_link_up(PCIE_BASE))
+ return 0;
+
+ if (bus == 0 && dev != 1)
+ return 0;
+
+ return 1;
+}
+
+
+/*
+ * PCIe config cycles are done by programming the PCIE_CONF_ADDR register
+ * and then reading the PCIE_CONF_DATA register. Need to make sure these
+ * transactions are atomic.
+ */
+static DEFINE_SPINLOCK(kirkwood_pcie_lock);
+
+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+ int size, u32 *val)
+{
+ unsigned long flags;
+ int ret;
+
+ if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ spin_lock_irqsave(&kirkwood_pcie_lock, flags);
+ ret = orion_pcie_rd_conf(PCIE_BASE, bus, devfn, where, size, val);
+ spin_unlock_irqrestore(&kirkwood_pcie_lock, flags);
+
+ return ret;
+}
+
+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+ int where, int size, u32 val)
+{
+ unsigned long flags;
+ int ret;
+
+ if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ spin_lock_irqsave(&kirkwood_pcie_lock, flags);
+ ret = orion_pcie_wr_conf(PCIE_BASE, bus, devfn, where, size, val);
+ spin_unlock_irqrestore(&kirkwood_pcie_lock, flags);
+
+ return ret;
+}
+
+static struct pci_ops pcie_ops = {
+ .read = pcie_rd_conf,
+ .write = pcie_wr_conf,
+};
+
+
+static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+ struct resource *res;
+
+ /*
+ * Generic PCIe unit setup.
+ */
+ orion_pcie_setup(PCIE_BASE, &kirkwood_mbus_dram_info);
+
+ /*
+ * Request resources.
+ */
+ res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+ if (!res)
+ panic("pcie_setup unable to alloc resources");
+
+ /*
+ * IORESOURCE_IO
+ */
+ res[0].name = "PCIe I/O Space";
+ res[0].flags = IORESOURCE_IO;
+ res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
+ res[0].end = res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
+ if (request_resource(&ioport_resource, &res[0]))
+ panic("Request PCIe IO resource failed\n");
+ sys->resource[0] = &res[0];
+
+ /*
+ * IORESOURCE_MEM
+ */
+ res[1].name = "PCIe Memory Space";
+ res[1].flags = IORESOURCE_MEM;
+ res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
+ res[1].end = res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
+ if (request_resource(&iomem_resource, &res[1]))
+ panic("Request PCIe Memory resource failed\n");
+ sys->resource[1] = &res[1];
+
+ sys->resource[2] = NULL;
+ sys->io_offset = 0;
+
+ return 1;
+}
+
+static void __devinit rc_pci_fixup(struct pci_dev *dev)
+{
+ /*
+ * Prevent enumeration of root complex.
+ */
+ if (dev->bus->parent == NULL && dev->devfn == 0) {
+ int i;
+
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ dev->resource[i].start = 0;
+ dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+
+static struct pci_bus __init *
+kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+{
+ struct pci_bus *bus;
+
+ if (nr == 0) {
+ bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
+ } else {
+ bus = NULL;
+ BUG();
+ }
+
+ return bus;
+}
+
+static int __init kirkwood_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return IRQ_KIRKWOOD_PCIE;
+}
+
+static struct hw_pci kirkwood_pci __initdata = {
+ .nr_controllers = 1,
+ .swizzle = pci_std_swizzle,
+ .setup = kirkwood_pcie_setup,
+ .scan = kirkwood_pcie_scan_bus,
+ .map_irq = kirkwood_pcie_map_irq,
+};
+
+void __init kirkwood_pcie_init(void)
+{
+ pci_common_init(&kirkwood_pci);
+}
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
new file mode 100644
index 000000000000..6cf642c504d3
--- /dev/null
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+ *
+ * Marvell RD-88F6192-NAS Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/kirkwood.h>
+#include "common.h"
+
+#define RD88F6192_GPIO_USB_VBUS 10
+
+static struct mv643xx_eth_platform_data rd88f6192_ge00_data = {
+ .phy_addr = 8,
+};
+
+static struct mv_sata_platform_data rd88f6192_sata_data = {
+ .n_ports = 2,
+};
+
+static void __init rd88f6192_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&rd88f6192_ge00_data);
+ kirkwood_rtc_init();
+ kirkwood_sata_init(&rd88f6192_sata_data);
+ kirkwood_uart0_init();
+}
+
+static int __init rd88f6192_pci_init(void)
+{
+ if (machine_is_rd88f6192_nas())
+ kirkwood_pcie_init();
+
+ return 0;
+}
+subsys_initcall(rd88f6192_pci_init);
+
+MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
+ /* Maintainer: Saeed Bishara <saeed@marvell.com> */
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = rd88f6192_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
new file mode 100644
index 000000000000..e1f8de2c74a2
--- /dev/null
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -0,0 +1,113 @@
+/*
+ * arch/arm/mach-kirkwood/rd88f6281-setup.c
+ *
+ * Marvell RD-88F6281 Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/plat-orion/orion_nand.h>
+#include "common.h"
+
+static struct mtd_partition rd88f6281_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_2M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct resource rd88f6281_nand_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = KIRKWOOD_NAND_MEM_PHYS_BASE,
+ .end = KIRKWOOD_NAND_MEM_PHYS_BASE +
+ KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data rd88f6281_nand_data = {
+ .parts = rd88f6281_nand_parts,
+ .nr_parts = ARRAY_SIZE(rd88f6281_nand_parts),
+ .cle = 0,
+ .ale = 1,
+ .width = 8,
+ .chip_delay = 25,
+};
+
+static struct platform_device rd88f6281_nand_flash = {
+ .name = "orion_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &rd88f6281_nand_data,
+ },
+ .resource = &rd88f6281_nand_resource,
+ .num_resources = 1,
+};
+
+static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
+ .phy_addr = -1,
+};
+
+static struct mv_sata_platform_data rd88f6281_sata_data = {
+ .n_ports = 2,
+};
+
+static void __init rd88f6281_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&rd88f6281_ge00_data);
+ kirkwood_rtc_init();
+ kirkwood_sata_init(&rd88f6281_sata_data);
+ kirkwood_uart0_init();
+ kirkwood_uart1_init();
+
+ platform_device_register(&rd88f6281_nand_flash);
+}
+
+static int __init rd88f6281_pci_init(void)
+{
+ if (machine_is_rd88f6281())
+ kirkwood_pcie_init();
+
+ return 0;
+}
+subsys_initcall(rd88f6281_pci_init);
+
+MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
+ /* Maintainer: Saeed Bishara <saeed@marvell.com> */
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = rd88f6281_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-loki/Kconfig b/arch/arm/mach-loki/Kconfig
new file mode 100644
index 000000000000..0045bdd761ca
--- /dev/null
+++ b/arch/arm/mach-loki/Kconfig
@@ -0,0 +1,13 @@
+if ARCH_LOKI
+
+menu "Marvell Loki (88RC8480) Implementations"
+
+config MACH_LB88RC8480
+ bool "Marvell LB88RC8480 Development Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell LB88RC8480 Development Board.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-loki/Makefile b/arch/arm/mach-loki/Makefile
new file mode 100644
index 000000000000..d43233ee590f
--- /dev/null
+++ b/arch/arm/mach-loki/Makefile
@@ -0,0 +1,3 @@
+obj-y += common.o addr-map.o irq.o
+
+obj-$(CONFIG_MACH_LB88RC8480) += lb88rc8480-setup.o
diff --git a/arch/arm/mach-loki/Makefile.boot b/arch/arm/mach-loki/Makefile.boot
new file mode 100644
index 000000000000..67039c3e0c48
--- /dev/null
+++ b/arch/arm/mach-loki/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-loki/addr-map.c b/arch/arm/mach-loki/addr-map.c
new file mode 100644
index 000000000000..ba25e56ade58
--- /dev/null
+++ b/arch/arm/mach-loki/addr-map.c
@@ -0,0 +1,121 @@
+/*
+ * arch/arm/mach-loki/addr-map.c
+ *
+ * Address map functions for Marvell Loki (88RC8480) SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include "common.h"
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define TARGET_DDR 0
+#define TARGET_DEV_BUS 1
+#define TARGET_PCIE0 3
+#define TARGET_PCIE1 4
+#define ATTR_DEV_BOOT 0x0f
+#define ATTR_DEV_CS2 0x1b
+#define ATTR_DEV_CS1 0x1d
+#define ATTR_DEV_CS0 0x1e
+#define ATTR_PCIE_IO 0x51
+#define ATTR_PCIE_MEM 0x59
+
+/*
+ * Helpers to get DDR bank info
+ */
+#define DDR_SIZE_CS(n) DDR_REG(0x1500 + ((n) << 3))
+#define DDR_BASE_CS(n) DDR_REG(0x1504 + ((n) << 3))
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define CPU_WIN_CTRL(n) BRIDGE_REG(0x000 | ((n) << 4))
+#define CPU_WIN_BASE(n) BRIDGE_REG(0x004 | ((n) << 4))
+#define CPU_WIN_REMAP_LO(n) BRIDGE_REG(0x008 | ((n) << 4))
+#define CPU_WIN_REMAP_HI(n) BRIDGE_REG(0x00c | ((n) << 4))
+
+
+struct mbus_dram_target_info loki_mbus_dram_info;
+
+static void __init setup_cpu_win(int win, u32 base, u32 size,
+ u8 target, u8 attr, int remap)
+{
+ u32 ctrl;
+
+ base &= 0xffff0000;
+ ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (1 << 5) | target;
+
+ writel(base, CPU_WIN_BASE(win));
+ writel(ctrl, CPU_WIN_CTRL(win));
+ if (win < 2) {
+ if (remap < 0)
+ remap = base;
+
+ writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win));
+ writel(0, CPU_WIN_REMAP_HI(win));
+ }
+}
+
+void __init loki_setup_cpu_mbus(void)
+{
+ int i;
+ int cs;
+
+ /*
+ * First, disable and clear windows.
+ */
+ for (i = 0; i < 8; i++) {
+ writel(0, CPU_WIN_BASE(i));
+ writel(0, CPU_WIN_CTRL(i));
+ if (i < 2) {
+ writel(0, CPU_WIN_REMAP_LO(i));
+ writel(0, CPU_WIN_REMAP_HI(i));
+ }
+ }
+
+ /*
+ * Setup windows for PCIe IO+MEM space.
+ */
+ setup_cpu_win(2, LOKI_PCIE0_MEM_PHYS_BASE, LOKI_PCIE0_MEM_SIZE,
+ TARGET_PCIE0, ATTR_PCIE_MEM, -1);
+ setup_cpu_win(3, LOKI_PCIE1_MEM_PHYS_BASE, LOKI_PCIE1_MEM_SIZE,
+ TARGET_PCIE1, ATTR_PCIE_MEM, -1);
+
+ /*
+ * Setup MBUS dram target info.
+ */
+ loki_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+ for (i = 0, cs = 0; i < 4; i++) {
+ u32 base = readl(DDR_BASE_CS(i));
+ u32 size = readl(DDR_SIZE_CS(i));
+
+ /*
+ * Chip select enabled?
+ */
+ if (size & 1) {
+ struct mbus_dram_window *w;
+
+ w = &loki_mbus_dram_info.cs[cs++];
+ w->cs_index = i;
+ w->mbus_attr = 0xf & ~(1 << i);
+ w->base = base & 0xffff0000;
+ w->size = (size | 0x0000ffff) + 1;
+ }
+ }
+ loki_mbus_dram_info.num_cs = cs;
+}
+
+void __init loki_setup_dev_boot_win(u32 base, u32 size)
+{
+ setup_cpu_win(4, base, size, TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
+}
diff --git a/arch/arm/mach-loki/common.c b/arch/arm/mach-loki/common.c
new file mode 100644
index 000000000000..410f50399dd3
--- /dev/null
+++ b/arch/arm/mach-loki/common.c
@@ -0,0 +1,305 @@
+/*
+ * arch/arm/mach-loki/common.c
+ *
+ * Core functions for Marvell Loki (88RC8480) SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/mbus.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/page.h>
+#include <asm/timex.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/arch/loki.h>
+#include <asm/plat-orion/orion_nand.h>
+#include <asm/plat-orion/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc loki_io_desc[] __initdata = {
+ {
+ .virtual = LOKI_REGS_VIRT_BASE,
+ .pfn = __phys_to_pfn(LOKI_REGS_PHYS_BASE),
+ .length = LOKI_REGS_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init loki_map_io(void)
+{
+ iotable_init(loki_io_desc, ARRAY_SIZE(loki_io_desc));
+}
+
+
+/*****************************************************************************
+ * GE0
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data loki_ge0_shared_data = {
+ .t_clk = LOKI_TCLK,
+ .dram = &loki_mbus_dram_info,
+};
+
+static struct resource loki_ge0_shared_resources[] = {
+ {
+ .name = "ge0 base",
+ .start = GE0_PHYS_BASE + 0x2000,
+ .end = GE0_PHYS_BASE + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device loki_ge0_shared = {
+ .name = MV643XX_ETH_SHARED_NAME,
+ .id = 0,
+ .dev = {
+ .platform_data = &loki_ge0_shared_data,
+ },
+ .num_resources = 1,
+ .resource = loki_ge0_shared_resources,
+};
+
+static struct resource loki_ge0_resources[] = {
+ {
+ .name = "ge0 irq",
+ .start = IRQ_LOKI_GBE_A_INT,
+ .end = IRQ_LOKI_GBE_A_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device loki_ge0 = {
+ .name = MV643XX_ETH_NAME,
+ .id = 0,
+ .num_resources = 1,
+ .resource = loki_ge0_resources,
+};
+
+void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data)
+{
+ eth_data->shared = &loki_ge0_shared;
+ loki_ge0.dev.platform_data = eth_data;
+
+ writel(0x00079220, GE0_VIRT_BASE + 0x20b0);
+ platform_device_register(&loki_ge0_shared);
+ platform_device_register(&loki_ge0);
+}
+
+
+/*****************************************************************************
+ * GE1
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data loki_ge1_shared_data = {
+ .t_clk = LOKI_TCLK,
+ .dram = &loki_mbus_dram_info,
+};
+
+static struct resource loki_ge1_shared_resources[] = {
+ {
+ .name = "ge1 base",
+ .start = GE1_PHYS_BASE + 0x2000,
+ .end = GE1_PHYS_BASE + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device loki_ge1_shared = {
+ .name = MV643XX_ETH_SHARED_NAME,
+ .id = 1,
+ .dev = {
+ .platform_data = &loki_ge1_shared_data,
+ },
+ .num_resources = 1,
+ .resource = loki_ge1_shared_resources,
+};
+
+static struct resource loki_ge1_resources[] = {
+ {
+ .name = "ge1 irq",
+ .start = IRQ_LOKI_GBE_B_INT,
+ .end = IRQ_LOKI_GBE_B_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device loki_ge1 = {
+ .name = MV643XX_ETH_NAME,
+ .id = 1,
+ .num_resources = 1,
+ .resource = loki_ge1_resources,
+};
+
+void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data)
+{
+ eth_data->shared = &loki_ge1_shared;
+ loki_ge1.dev.platform_data = eth_data;
+
+ writel(0x00079220, GE1_VIRT_BASE + 0x20b0);
+ platform_device_register(&loki_ge1_shared);
+ platform_device_register(&loki_ge1);
+}
+
+
+/*****************************************************************************
+ * SAS/SATA
+ ****************************************************************************/
+static struct resource loki_sas_resources[] = {
+ {
+ .name = "mvsas0 mem",
+ .start = SAS0_PHYS_BASE,
+ .end = SAS0_PHYS_BASE + 0x01ff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "mvsas0 irq",
+ .start = IRQ_LOKI_SAS_A,
+ .end = IRQ_LOKI_SAS_A,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .name = "mvsas1 mem",
+ .start = SAS1_PHYS_BASE,
+ .end = SAS1_PHYS_BASE + 0x01ff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "mvsas1 irq",
+ .start = IRQ_LOKI_SAS_B,
+ .end = IRQ_LOKI_SAS_B,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device loki_sas = {
+ .name = "mvsas",
+ .id = 0,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(loki_sas_resources),
+ .resource = loki_sas_resources,
+};
+
+void __init loki_sas_init(void)
+{
+ writel(0x8300f707, DDR_REG(0x1424));
+ platform_device_register(&loki_sas);
+}
+
+
+/*****************************************************************************
+ * UART0
+ ****************************************************************************/
+static struct plat_serial8250_port loki_uart0_data[] = {
+ {
+ .mapbase = UART0_PHYS_BASE,
+ .membase = (char *)UART0_VIRT_BASE,
+ .irq = IRQ_LOKI_UART0,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = LOKI_TCLK,
+ }, {
+ },
+};
+
+static struct resource loki_uart0_resources[] = {
+ {
+ .start = UART0_PHYS_BASE,
+ .end = UART0_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_LOKI_UART0,
+ .end = IRQ_LOKI_UART0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device loki_uart0 = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = loki_uart0_data,
+ },
+ .resource = loki_uart0_resources,
+ .num_resources = ARRAY_SIZE(loki_uart0_resources),
+};
+
+void __init loki_uart0_init(void)
+{
+ platform_device_register(&loki_uart0);
+}
+
+
+/*****************************************************************************
+ * UART1
+ ****************************************************************************/
+static struct plat_serial8250_port loki_uart1_data[] = {
+ {
+ .mapbase = UART1_PHYS_BASE,
+ .membase = (char *)UART1_VIRT_BASE,
+ .irq = IRQ_LOKI_UART1,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = LOKI_TCLK,
+ }, {
+ },
+};
+
+static struct resource loki_uart1_resources[] = {
+ {
+ .start = UART1_PHYS_BASE,
+ .end = UART1_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_LOKI_UART1,
+ .end = IRQ_LOKI_UART1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device loki_uart1 = {
+ .name = "serial8250",
+ .id = 1,
+ .dev = {
+ .platform_data = loki_uart1_data,
+ },
+ .resource = loki_uart1_resources,
+ .num_resources = ARRAY_SIZE(loki_uart1_resources),
+};
+
+void __init loki_uart1_init(void)
+{
+ platform_device_register(&loki_uart1);
+}
+
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+static void loki_timer_init(void)
+{
+ orion_time_init(IRQ_LOKI_BRIDGE, LOKI_TCLK);
+}
+
+struct sys_timer loki_timer = {
+ .init = loki_timer_init,
+};
+
+
+/*****************************************************************************
+ * General
+ ****************************************************************************/
+void __init loki_init(void)
+{
+ printk(KERN_INFO "Loki ID: 88RC8480. TCLK=%d.\n", LOKI_TCLK);
+
+ loki_setup_cpu_mbus();
+}
diff --git a/arch/arm/mach-loki/common.h b/arch/arm/mach-loki/common.h
new file mode 100644
index 000000000000..26054fd0f05e
--- /dev/null
+++ b/arch/arm/mach-loki/common.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-loki/common.h
+ *
+ * Core functions for Marvell Loki (88RC8480) SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_LOKI_COMMON_H
+#define __ARCH_LOKI_COMMON_H
+
+struct mv643xx_eth_platform_data;
+
+/*
+ * Basic Loki init functions used early by machine-setup.
+ */
+void loki_map_io(void);
+void loki_init(void);
+void loki_init_irq(void);
+
+extern struct mbus_dram_target_info loki_mbus_dram_info;
+void loki_setup_cpu_mbus(void);
+void loki_setup_dev_boot_win(u32 base, u32 size);
+
+void loki_ge0_init(struct mv643xx_eth_platform_data *eth_data);
+void loki_ge1_init(struct mv643xx_eth_platform_data *eth_data);
+void loki_sas_init(void);
+void loki_uart0_init(void);
+void loki_uart1_init(void);
+
+extern struct sys_timer loki_timer;
+
+
+#endif
diff --git a/arch/arm/mach-loki/irq.c b/arch/arm/mach-loki/irq.c
new file mode 100644
index 000000000000..d839af91fe03
--- /dev/null
+++ b/arch/arm/mach-loki/irq.c
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-loki/irq.c
+ *
+ * Marvell Loki (88RC8480) IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/plat-orion/irq.h>
+#include "common.h"
+
+void __init loki_init_irq(void)
+{
+ orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_OFF));
+}
diff --git a/arch/arm/mach-loki/lb88rc8480-setup.c b/arch/arm/mach-loki/lb88rc8480-setup.c
new file mode 100644
index 000000000000..d1b9e6e6253a
--- /dev/null
+++ b/arch/arm/mach-loki/lb88rc8480-setup.c
@@ -0,0 +1,100 @@
+/*
+ * arch/arm/mach-loki/lb88rc8480-setup.c
+ *
+ * Marvell LB88RC8480 Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/loki.h>
+#include "common.h"
+
+#define LB88RC8480_FLASH_BOOT_CS_BASE 0xf8000000
+#define LB88RC8480_FLASH_BOOT_CS_SIZE SZ_128M
+
+#define LB88RC8480_NOR_BOOT_BASE 0xff000000
+#define LB88RC8480_NOR_BOOT_SIZE SZ_16M
+
+static struct mtd_partition lb88rc8480_boot_flash_parts[] = {
+ {
+ .name = "kernel",
+ .offset = 0,
+ .size = SZ_2M,
+ }, {
+ .name = "root-fs",
+ .offset = SZ_2M,
+ .size = (SZ_8M + SZ_4M + SZ_1M),
+ }, {
+ .name = "u-boot",
+ .offset = (SZ_8M + SZ_4M + SZ_2M + SZ_1M),
+ .size = SZ_1M,
+ },
+};
+
+static struct physmap_flash_data lb88rc8480_boot_flash_data = {
+ .parts = lb88rc8480_boot_flash_parts,
+ .nr_parts = ARRAY_SIZE(lb88rc8480_boot_flash_parts),
+ .width = 1, /* 8 bit bus width */
+};
+
+static struct resource lb88rc8480_boot_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = LB88RC8480_NOR_BOOT_BASE,
+ .end = LB88RC8480_NOR_BOOT_BASE + LB88RC8480_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device lb88rc8480_boot_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &lb88rc8480_boot_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &lb88rc8480_boot_flash_resource,
+};
+
+static struct mv643xx_eth_platform_data lb88rc8480_ge0_data = {
+ .phy_addr = 1,
+ .mac_addr = { 0x00, 0x50, 0x43, 0x11, 0x22, 0x33 },
+};
+
+static void __init lb88rc8480_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ loki_init();
+
+ loki_ge0_init(&lb88rc8480_ge0_data);
+ loki_sas_init();
+ loki_uart0_init();
+ loki_uart1_init();
+
+ loki_setup_dev_boot_win(LB88RC8480_FLASH_BOOT_CS_BASE,
+ LB88RC8480_FLASH_BOOT_CS_SIZE);
+ platform_device_register(&lb88rc8480_boot_flash);
+}
+
+MACHINE_START(LB88RC8480, "Marvell LB88RC8480 Development Board")
+ /* Maintainer: Ke Wei <kewei@marvell.com> */
+ .phys_io = LOKI_REGS_PHYS_BASE,
+ .io_pg_offst = ((LOKI_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = lb88rc8480_init,
+ .map_io = loki_map_io,
+ .init_irq = loki_init_irq,
+ .timer = &loki_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig
new file mode 100644
index 000000000000..d83cb86837db
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/Kconfig
@@ -0,0 +1,13 @@
+if ARCH_MV78XX0
+
+menu "Marvell MV78xx0 Implementations"
+
+config MACH_DB78X00_BP
+ bool "Marvell DB-78x00-BP Development Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell DB-78x00-BP Development Board.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile
new file mode 100644
index 000000000000..ec16c05c3b1b
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/Makefile
@@ -0,0 +1,2 @@
+obj-y += common.o addr-map.o irq.o pcie.o
+obj-$(CONFIG_MACH_DB78X00_BP) += db78x00-bp-setup.o
diff --git a/arch/arm/mach-mv78xx0/Makefile.boot b/arch/arm/mach-mv78xx0/Makefile.boot
new file mode 100644
index 000000000000..67039c3e0c48
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c
new file mode 100644
index 000000000000..4004b672a2eb
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/addr-map.c
@@ -0,0 +1,156 @@
+/*
+ * arch/arm/mach-mv78xx0/addr-map.c
+ *
+ * Address map functions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <asm/io.h>
+#include "common.h"
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define TARGET_DDR 0
+#define TARGET_DEV_BUS 1
+#define TARGET_PCIE0 4
+#define TARGET_PCIE1 8
+#define TARGET_PCIE(i) ((i) ? TARGET_PCIE1 : TARGET_PCIE0)
+#define ATTR_DEV_SPI_ROM 0x1f
+#define ATTR_DEV_BOOT 0x2f
+#define ATTR_DEV_CS3 0x37
+#define ATTR_DEV_CS2 0x3b
+#define ATTR_DEV_CS1 0x3d
+#define ATTR_DEV_CS0 0x3e
+#define ATTR_PCIE_IO(l) (0xf0 & ~(0x10 << (l)))
+#define ATTR_PCIE_MEM(l) (0xf8 & ~(0x10 << (l)))
+
+/*
+ * Helpers to get DDR bank info
+ */
+#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3))
+#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3))
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
+#define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4))
+#define WIN_CTRL_OFF 0x0000
+#define WIN_BASE_OFF 0x0004
+#define WIN_REMAP_LO_OFF 0x0008
+#define WIN_REMAP_HI_OFF 0x000c
+
+
+struct mbus_dram_target_info mv78xx0_mbus_dram_info;
+
+static void __init __iomem *win_cfg_base(int win)
+{
+ /*
+ * Find the control register base address for this window.
+ *
+ * BRIDGE_VIRT_BASE points to the right (CPU0's or CPU1's)
+ * MBUS bridge depending on which CPU core we're running on,
+ * so we don't need to take that into account here.
+ */
+
+ return (void __iomem *)((win < 8) ? WIN0_OFF(win) : WIN8_OFF(win));
+}
+
+static int __init cpu_win_can_remap(int win)
+{
+ if (win < 8)
+ return 1;
+
+ return 0;
+}
+
+static void __init setup_cpu_win(int win, u32 base, u32 size,
+ u8 target, u8 attr, int remap)
+{
+ void __iomem *addr = win_cfg_base(win);
+ u32 ctrl;
+
+ base &= 0xffff0000;
+ ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
+
+ writel(base, addr + WIN_BASE_OFF);
+ writel(ctrl, addr + WIN_CTRL_OFF);
+ if (cpu_win_can_remap(win)) {
+ if (remap < 0)
+ remap = base;
+
+ writel(remap & 0xffff0000, addr + WIN_REMAP_LO_OFF);
+ writel(0, addr + WIN_REMAP_HI_OFF);
+ }
+}
+
+void __init mv78xx0_setup_cpu_mbus(void)
+{
+ void __iomem *addr;
+ int i;
+ int cs;
+
+ /*
+ * First, disable and clear windows.
+ */
+ for (i = 0; i < 14; i++) {
+ addr = win_cfg_base(i);
+
+ writel(0, addr + WIN_BASE_OFF);
+ writel(0, addr + WIN_CTRL_OFF);
+ if (cpu_win_can_remap(i)) {
+ writel(0, addr + WIN_REMAP_LO_OFF);
+ writel(0, addr + WIN_REMAP_HI_OFF);
+ }
+ }
+
+ /*
+ * Setup MBUS dram target info.
+ */
+ mv78xx0_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+ if (mv78xx0_core_index() == 0)
+ addr = (void __iomem *)DDR_WINDOW_CPU0_BASE;
+ else
+ addr = (void __iomem *)DDR_WINDOW_CPU1_BASE;
+
+ for (i = 0, cs = 0; i < 4; i++) {
+ u32 base = readl(addr + DDR_BASE_CS_OFF(i));
+ u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
+
+ /*
+ * Chip select enabled?
+ */
+ if (size & 1) {
+ struct mbus_dram_window *w;
+
+ w = &mv78xx0_mbus_dram_info.cs[cs++];
+ w->cs_index = i;
+ w->mbus_attr = 0xf & ~(1 << i);
+ w->base = base & 0xffff0000;
+ w->size = (size | 0x0000ffff) + 1;
+ }
+ }
+ mv78xx0_mbus_dram_info.num_cs = cs;
+}
+
+void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
+ int maj, int min)
+{
+ setup_cpu_win(window, base, size, TARGET_PCIE(maj),
+ ATTR_PCIE_IO(min), -1);
+}
+
+void __init mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
+ int maj, int min)
+{
+ setup_cpu_win(window, base, size, TARGET_PCIE(maj),
+ ATTR_PCIE_MEM(min), -1);
+}
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
new file mode 100644
index 000000000000..d27b83b7bf62
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -0,0 +1,754 @@
+/*
+ * arch/arm/mach-mv78xx0/common.c
+ *
+ * Core functions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/mbus.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/arch/mv78xx0.h>
+#include <asm/plat-orion/cache-feroceon-l2.h>
+#include <asm/plat-orion/ehci-orion.h>
+#include <asm/plat-orion/orion_nand.h>
+#include <asm/plat-orion/time.h>
+#include "common.h"
+
+
+/*****************************************************************************
+ * Common bits
+ ****************************************************************************/
+int mv78xx0_core_index(void)
+{
+ u32 extra;
+
+ /*
+ * Read Extra Features register.
+ */
+ __asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (extra));
+
+ return !!(extra & 0x00004000);
+}
+
+static int get_hclk(void)
+{
+ int hclk;
+
+ /*
+ * HCLK tick rate is configured by DEV_D[7:5] pins.
+ */
+ switch ((readl(SAMPLE_AT_RESET_LOW) >> 5) & 7) {
+ case 0:
+ hclk = 166666667;
+ break;
+ case 1:
+ hclk = 200000000;
+ break;
+ case 2:
+ hclk = 266666667;
+ break;
+ case 3:
+ hclk = 333333333;
+ break;
+ case 4:
+ hclk = 400000000;
+ break;
+ default:
+ panic("unknown HCLK PLL setting: %.8x\n",
+ readl(SAMPLE_AT_RESET_LOW));
+ }
+
+ return hclk;
+}
+
+static void get_pclk_l2clk(int hclk, int core_index, int *pclk, int *l2clk)
+{
+ u32 cfg;
+
+ /*
+ * Core #0 PCLK/L2CLK is configured by bits [13:8], core #1
+ * PCLK/L2CLK by bits [19:14].
+ */
+ if (core_index == 0) {
+ cfg = (readl(SAMPLE_AT_RESET_LOW) >> 8) & 0x3f;
+ } else {
+ cfg = (readl(SAMPLE_AT_RESET_LOW) >> 14) & 0x3f;
+ }
+
+ /*
+ * Bits [11:8] ([17:14] for core #1) configure the PCLK:HCLK
+ * ratio (1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6).
+ */
+ *pclk = ((u64)hclk * (2 + (cfg & 0xf))) >> 1;
+
+ /*
+ * Bits [13:12] ([19:18] for core #1) configure the PCLK:L2CLK
+ * ratio (1, 2, 3).
+ */
+ *l2clk = *pclk / (((cfg >> 4) & 3) + 1);
+}
+
+static int get_tclk(void)
+{
+ int tclk;
+
+ /*
+ * TCLK tick rate is configured by DEV_A[2:0] strap pins.
+ */
+ switch ((readl(SAMPLE_AT_RESET_HIGH) >> 6) & 7) {
+ case 1:
+ tclk = 166666667;
+ break;
+ case 3:
+ tclk = 200000000;
+ break;
+ default:
+ panic("unknown TCLK PLL setting: %.8x\n",
+ readl(SAMPLE_AT_RESET_HIGH));
+ }
+
+ return tclk;
+}
+
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc mv78xx0_io_desc[] __initdata = {
+ {
+ .virtual = MV78XX0_CORE_REGS_VIRT_BASE,
+ .pfn = 0,
+ .length = MV78XX0_CORE_REGS_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = MV78XX0_PCIE_IO_VIRT_BASE(0),
+ .pfn = __phys_to_pfn(MV78XX0_PCIE_IO_PHYS_BASE(0)),
+ .length = MV78XX0_PCIE_IO_SIZE * 8,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = MV78XX0_REGS_VIRT_BASE,
+ .pfn = __phys_to_pfn(MV78XX0_REGS_PHYS_BASE),
+ .length = MV78XX0_REGS_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init mv78xx0_map_io(void)
+{
+ unsigned long phys;
+
+ /*
+ * Map the right set of per-core registers depending on
+ * which core we are running on.
+ */
+ if (mv78xx0_core_index() == 0) {
+ phys = MV78XX0_CORE0_REGS_PHYS_BASE;
+ } else {
+ phys = MV78XX0_CORE1_REGS_PHYS_BASE;
+ }
+ mv78xx0_io_desc[0].pfn = __phys_to_pfn(phys);
+
+ iotable_init(mv78xx0_io_desc, ARRAY_SIZE(mv78xx0_io_desc));
+}
+
+
+/*****************************************************************************
+ * EHCI
+ ****************************************************************************/
+static struct orion_ehci_data mv78xx0_ehci_data = {
+ .dram = &mv78xx0_mbus_dram_info,
+};
+
+static u64 ehci_dmamask = 0xffffffffUL;
+
+
+/*****************************************************************************
+ * EHCI0
+ ****************************************************************************/
+static struct resource mv78xx0_ehci0_resources[] = {
+ {
+ .start = USB0_PHYS_BASE,
+ .end = USB0_PHYS_BASE + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_MV78XX0_USB_0,
+ .end = IRQ_MV78XX0_USB_0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mv78xx0_ehci0 = {
+ .name = "orion-ehci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &mv78xx0_ehci_data,
+ },
+ .resource = mv78xx0_ehci0_resources,
+ .num_resources = ARRAY_SIZE(mv78xx0_ehci0_resources),
+};
+
+void __init mv78xx0_ehci0_init(void)
+{
+ platform_device_register(&mv78xx0_ehci0);
+}
+
+
+/*****************************************************************************
+ * EHCI1
+ ****************************************************************************/
+static struct resource mv78xx0_ehci1_resources[] = {
+ {
+ .start = USB1_PHYS_BASE,
+ .end = USB1_PHYS_BASE + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_MV78XX0_USB_1,
+ .end = IRQ_MV78XX0_USB_1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mv78xx0_ehci1 = {
+ .name = "orion-ehci",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &mv78xx0_ehci_data,
+ },
+ .resource = mv78xx0_ehci1_resources,
+ .num_resources = ARRAY_SIZE(mv78xx0_ehci1_resources),
+};
+
+void __init mv78xx0_ehci1_init(void)
+{
+ platform_device_register(&mv78xx0_ehci1);
+}
+
+
+/*****************************************************************************
+ * EHCI2
+ ****************************************************************************/
+static struct resource mv78xx0_ehci2_resources[] = {
+ {
+ .start = USB2_PHYS_BASE,
+ .end = USB2_PHYS_BASE + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_MV78XX0_USB_2,
+ .end = IRQ_MV78XX0_USB_2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mv78xx0_ehci2 = {
+ .name = "orion-ehci",
+ .id = 2,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &mv78xx0_ehci_data,
+ },
+ .resource = mv78xx0_ehci2_resources,
+ .num_resources = ARRAY_SIZE(mv78xx0_ehci2_resources),
+};
+
+void __init mv78xx0_ehci2_init(void)
+{
+ platform_device_register(&mv78xx0_ehci2);
+}
+
+
+/*****************************************************************************
+ * GE00
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data mv78xx0_ge00_shared_data = {
+ .t_clk = 0,
+ .dram = &mv78xx0_mbus_dram_info,
+};
+
+static struct resource mv78xx0_ge00_shared_resources[] = {
+ {
+ .name = "ge00 base",
+ .start = GE00_PHYS_BASE + 0x2000,
+ .end = GE00_PHYS_BASE + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device mv78xx0_ge00_shared = {
+ .name = MV643XX_ETH_SHARED_NAME,
+ .id = 0,
+ .dev = {
+ .platform_data = &mv78xx0_ge00_shared_data,
+ },
+ .num_resources = 1,
+ .resource = mv78xx0_ge00_shared_resources,
+};
+
+static struct resource mv78xx0_ge00_resources[] = {
+ {
+ .name = "ge00 irq",
+ .start = IRQ_MV78XX0_GE00_SUM,
+ .end = IRQ_MV78XX0_GE00_SUM,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mv78xx0_ge00 = {
+ .name = MV643XX_ETH_NAME,
+ .id = 0,
+ .num_resources = 1,
+ .resource = mv78xx0_ge00_resources,
+};
+
+void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
+{
+ eth_data->shared = &mv78xx0_ge00_shared;
+ mv78xx0_ge00.dev.platform_data = eth_data;
+
+ platform_device_register(&mv78xx0_ge00_shared);
+ platform_device_register(&mv78xx0_ge00);
+}
+
+
+/*****************************************************************************
+ * GE01
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data mv78xx0_ge01_shared_data = {
+ .t_clk = 0,
+ .dram = &mv78xx0_mbus_dram_info,
+};
+
+static struct resource mv78xx0_ge01_shared_resources[] = {
+ {
+ .name = "ge01 base",
+ .start = GE01_PHYS_BASE + 0x2000,
+ .end = GE01_PHYS_BASE + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device mv78xx0_ge01_shared = {
+ .name = MV643XX_ETH_SHARED_NAME,
+ .id = 1,
+ .dev = {
+ .platform_data = &mv78xx0_ge01_shared_data,
+ },
+ .num_resources = 1,
+ .resource = mv78xx0_ge01_shared_resources,
+};
+
+static struct resource mv78xx0_ge01_resources[] = {
+ {
+ .name = "ge01 irq",
+ .start = IRQ_MV78XX0_GE01_SUM,
+ .end = IRQ_MV78XX0_GE01_SUM,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mv78xx0_ge01 = {
+ .name = MV643XX_ETH_NAME,
+ .id = 1,
+ .num_resources = 1,
+ .resource = mv78xx0_ge01_resources,
+};
+
+void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
+{
+ eth_data->shared = &mv78xx0_ge01_shared;
+ eth_data->shared_smi = &mv78xx0_ge00_shared;
+ mv78xx0_ge01.dev.platform_data = eth_data;
+
+ platform_device_register(&mv78xx0_ge01_shared);
+ platform_device_register(&mv78xx0_ge01);
+}
+
+
+/*****************************************************************************
+ * GE10
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data mv78xx0_ge10_shared_data = {
+ .t_clk = 0,
+ .dram = &mv78xx0_mbus_dram_info,
+};
+
+static struct resource mv78xx0_ge10_shared_resources[] = {
+ {
+ .name = "ge10 base",
+ .start = GE10_PHYS_BASE + 0x2000,
+ .end = GE10_PHYS_BASE + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device mv78xx0_ge10_shared = {
+ .name = MV643XX_ETH_SHARED_NAME,
+ .id = 2,
+ .dev = {
+ .platform_data = &mv78xx0_ge10_shared_data,
+ },
+ .num_resources = 1,
+ .resource = mv78xx0_ge10_shared_resources,
+};
+
+static struct resource mv78xx0_ge10_resources[] = {
+ {
+ .name = "ge10 irq",
+ .start = IRQ_MV78XX0_GE10_SUM,
+ .end = IRQ_MV78XX0_GE10_SUM,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mv78xx0_ge10 = {
+ .name = MV643XX_ETH_NAME,
+ .id = 2,
+ .num_resources = 1,
+ .resource = mv78xx0_ge10_resources,
+};
+
+void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
+{
+ eth_data->shared = &mv78xx0_ge10_shared;
+ eth_data->shared_smi = &mv78xx0_ge00_shared;
+ mv78xx0_ge10.dev.platform_data = eth_data;
+
+ platform_device_register(&mv78xx0_ge10_shared);
+ platform_device_register(&mv78xx0_ge10);
+}
+
+
+/*****************************************************************************
+ * GE11
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data mv78xx0_ge11_shared_data = {
+ .t_clk = 0,
+ .dram = &mv78xx0_mbus_dram_info,
+};
+
+static struct resource mv78xx0_ge11_shared_resources[] = {
+ {
+ .name = "ge11 base",
+ .start = GE11_PHYS_BASE + 0x2000,
+ .end = GE11_PHYS_BASE + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device mv78xx0_ge11_shared = {
+ .name = MV643XX_ETH_SHARED_NAME,
+ .id = 3,
+ .dev = {
+ .platform_data = &mv78xx0_ge11_shared_data,
+ },
+ .num_resources = 1,
+ .resource = mv78xx0_ge11_shared_resources,
+};
+
+static struct resource mv78xx0_ge11_resources[] = {
+ {
+ .name = "ge11 irq",
+ .start = IRQ_MV78XX0_GE11_SUM,
+ .end = IRQ_MV78XX0_GE11_SUM,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mv78xx0_ge11 = {
+ .name = MV643XX_ETH_NAME,
+ .id = 3,
+ .num_resources = 1,
+ .resource = mv78xx0_ge11_resources,
+};
+
+void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
+{
+ eth_data->shared = &mv78xx0_ge11_shared;
+ eth_data->shared_smi = &mv78xx0_ge00_shared;
+ mv78xx0_ge11.dev.platform_data = eth_data;
+
+ platform_device_register(&mv78xx0_ge11_shared);
+ platform_device_register(&mv78xx0_ge11);
+}
+
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct resource mv78xx0_sata_resources[] = {
+ {
+ .name = "sata base",
+ .start = SATA_PHYS_BASE,
+ .end = SATA_PHYS_BASE + 0x5000 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "sata irq",
+ .start = IRQ_MV78XX0_SATA,
+ .end = IRQ_MV78XX0_SATA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mv78xx0_sata = {
+ .name = "sata_mv",
+ .id = 0,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(mv78xx0_sata_resources),
+ .resource = mv78xx0_sata_resources,
+};
+
+void __init mv78xx0_sata_init(struct mv_sata_platform_data *sata_data)
+{
+ sata_data->dram = &mv78xx0_mbus_dram_info;
+ mv78xx0_sata.dev.platform_data = sata_data;
+ platform_device_register(&mv78xx0_sata);
+}
+
+
+/*****************************************************************************
+ * UART0
+ ****************************************************************************/
+static struct plat_serial8250_port mv78xx0_uart0_data[] = {
+ {
+ .mapbase = UART0_PHYS_BASE,
+ .membase = (char *)UART0_VIRT_BASE,
+ .irq = IRQ_MV78XX0_UART_0,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 0,
+ }, {
+ },
+};
+
+static struct resource mv78xx0_uart0_resources[] = {
+ {
+ .start = UART0_PHYS_BASE,
+ .end = UART0_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_MV78XX0_UART_0,
+ .end = IRQ_MV78XX0_UART_0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mv78xx0_uart0 = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = mv78xx0_uart0_data,
+ },
+ .resource = mv78xx0_uart0_resources,
+ .num_resources = ARRAY_SIZE(mv78xx0_uart0_resources),
+};
+
+void __init mv78xx0_uart0_init(void)
+{
+ platform_device_register(&mv78xx0_uart0);
+}
+
+
+/*****************************************************************************
+ * UART1
+ ****************************************************************************/
+static struct plat_serial8250_port mv78xx0_uart1_data[] = {
+ {
+ .mapbase = UART1_PHYS_BASE,
+ .membase = (char *)UART1_VIRT_BASE,
+ .irq = IRQ_MV78XX0_UART_1,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 0,
+ }, {
+ },
+};
+
+static struct resource mv78xx0_uart1_resources[] = {
+ {
+ .start = UART1_PHYS_BASE,
+ .end = UART1_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_MV78XX0_UART_1,
+ .end = IRQ_MV78XX0_UART_1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mv78xx0_uart1 = {
+ .name = "serial8250",
+ .id = 1,
+ .dev = {
+ .platform_data = mv78xx0_uart1_data,
+ },
+ .resource = mv78xx0_uart1_resources,
+ .num_resources = ARRAY_SIZE(mv78xx0_uart1_resources),
+};
+
+void __init mv78xx0_uart1_init(void)
+{
+ platform_device_register(&mv78xx0_uart1);
+}
+
+
+/*****************************************************************************
+ * UART2
+ ****************************************************************************/
+static struct plat_serial8250_port mv78xx0_uart2_data[] = {
+ {
+ .mapbase = UART2_PHYS_BASE,
+ .membase = (char *)UART2_VIRT_BASE,
+ .irq = IRQ_MV78XX0_UART_2,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 0,
+ }, {
+ },
+};
+
+static struct resource mv78xx0_uart2_resources[] = {
+ {
+ .start = UART2_PHYS_BASE,
+ .end = UART2_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_MV78XX0_UART_2,
+ .end = IRQ_MV78XX0_UART_2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mv78xx0_uart2 = {
+ .name = "serial8250",
+ .id = 2,
+ .dev = {
+ .platform_data = mv78xx0_uart2_data,
+ },
+ .resource = mv78xx0_uart2_resources,
+ .num_resources = ARRAY_SIZE(mv78xx0_uart2_resources),
+};
+
+void __init mv78xx0_uart2_init(void)
+{
+ platform_device_register(&mv78xx0_uart2);
+}
+
+
+/*****************************************************************************
+ * UART3
+ ****************************************************************************/
+static struct plat_serial8250_port mv78xx0_uart3_data[] = {
+ {
+ .mapbase = UART3_PHYS_BASE,
+ .membase = (char *)UART3_VIRT_BASE,
+ .irq = IRQ_MV78XX0_UART_3,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 0,
+ }, {
+ },
+};
+
+static struct resource mv78xx0_uart3_resources[] = {
+ {
+ .start = UART3_PHYS_BASE,
+ .end = UART3_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_MV78XX0_UART_3,
+ .end = IRQ_MV78XX0_UART_3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mv78xx0_uart3 = {
+ .name = "serial8250",
+ .id = 3,
+ .dev = {
+ .platform_data = mv78xx0_uart3_data,
+ },
+ .resource = mv78xx0_uart3_resources,
+ .num_resources = ARRAY_SIZE(mv78xx0_uart3_resources),
+};
+
+void __init mv78xx0_uart3_init(void)
+{
+ platform_device_register(&mv78xx0_uart3);
+}
+
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+static void mv78xx0_timer_init(void)
+{
+ orion_time_init(IRQ_MV78XX0_TIMER_1, get_tclk());
+}
+
+struct sys_timer mv78xx0_timer = {
+ .init = mv78xx0_timer_init,
+};
+
+
+/*****************************************************************************
+ * General
+ ****************************************************************************/
+static int __init is_l2_writethrough(void)
+{
+ return !!(readl(CPU_CONTROL) & L2_WRITETHROUGH);
+}
+
+void __init mv78xx0_init(void)
+{
+ int core_index;
+ int hclk;
+ int pclk;
+ int l2clk;
+ int tclk;
+
+ core_index = mv78xx0_core_index();
+ hclk = get_hclk();
+ get_pclk_l2clk(hclk, core_index, &pclk, &l2clk);
+ tclk = get_tclk();
+
+ printk(KERN_INFO "MV78xx0 core #%d, ", core_index);
+ printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000);
+ printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000);
+ printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000);
+ printk("TCLK = %dMHz\n", (tclk + 499999) / 1000000);
+
+ mv78xx0_setup_cpu_mbus();
+
+#ifdef CONFIG_CACHE_FEROCEON_L2
+ feroceon_l2_init(is_l2_writethrough());
+#endif
+
+ mv78xx0_ge00_shared_data.t_clk = tclk;
+ mv78xx0_ge01_shared_data.t_clk = tclk;
+ mv78xx0_ge10_shared_data.t_clk = tclk;
+ mv78xx0_ge11_shared_data.t_clk = tclk;
+ mv78xx0_uart0_data[0].uartclk = tclk;
+ mv78xx0_uart1_data[0].uartclk = tclk;
+ mv78xx0_uart2_data[0].uartclk = tclk;
+ mv78xx0_uart3_data[0].uartclk = tclk;
+}
diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h
new file mode 100644
index 000000000000..78af5de319dd
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/common.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-mv78xx0/common.h
+ *
+ * Core functions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_MV78XX0_COMMON_H
+#define __ARCH_MV78XX0_COMMON_H
+
+struct mv643xx_eth_platform_data;
+struct mv_sata_platform_data;
+
+/*
+ * Basic MV78xx0 init functions used early by machine-setup.
+ */
+int mv78xx0_core_index(void);
+void mv78xx0_map_io(void);
+void mv78xx0_init(void);
+void mv78xx0_init_irq(void);
+
+extern struct mbus_dram_target_info mv78xx0_mbus_dram_info;
+void mv78xx0_setup_cpu_mbus(void);
+void mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
+ int maj, int min);
+void mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
+ int maj, int min);
+
+void mv78xx0_ehci0_init(void);
+void mv78xx0_ehci1_init(void);
+void mv78xx0_ehci2_init(void);
+void mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data);
+void mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data);
+void mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data);
+void mv78xx0_pcie_init(int init_port0, int init_port1);
+void mv78xx0_sata_init(struct mv_sata_platform_data *sata_data);
+void mv78xx0_uart0_init(void);
+void mv78xx0_uart1_init(void);
+void mv78xx0_uart2_init(void);
+void mv78xx0_uart3_init(void);
+
+extern struct sys_timer mv78xx0_timer;
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
new file mode 100644
index 000000000000..0c93d19193df
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -0,0 +1,94 @@
+/*
+ * arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+ *
+ * Marvell DB-78x00-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/arch/mv78xx0.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data db78x00_ge00_data = {
+ .phy_addr = 8,
+};
+
+static struct mv643xx_eth_platform_data db78x00_ge01_data = {
+ .phy_addr = 9,
+};
+
+static struct mv643xx_eth_platform_data db78x00_ge10_data = {
+ .phy_addr = -1,
+};
+
+static struct mv643xx_eth_platform_data db78x00_ge11_data = {
+ .phy_addr = -1,
+};
+
+static struct mv_sata_platform_data db78x00_sata_data = {
+ .n_ports = 2,
+};
+
+static void __init db78x00_init(void)
+{
+ /*
+ * Basic MV78xx0 setup. Needs to be called early.
+ */
+ mv78xx0_init();
+
+ /*
+ * Partition on-chip peripherals between the two CPU cores.
+ */
+ if (mv78xx0_core_index() == 0) {
+ mv78xx0_ehci0_init();
+ mv78xx0_ehci1_init();
+ mv78xx0_ehci2_init();
+ mv78xx0_ge00_init(&db78x00_ge00_data);
+ mv78xx0_ge01_init(&db78x00_ge01_data);
+ mv78xx0_ge10_init(&db78x00_ge10_data);
+ mv78xx0_ge11_init(&db78x00_ge11_data);
+ mv78xx0_sata_init(&db78x00_sata_data);
+ mv78xx0_uart0_init();
+ mv78xx0_uart2_init();
+ } else {
+ mv78xx0_uart1_init();
+ mv78xx0_uart3_init();
+ }
+}
+
+static int __init db78x00_pci_init(void)
+{
+ if (machine_is_db78x00_bp()) {
+ /*
+ * Assign the x16 PCIe slot on the board to CPU core
+ * #0, and let CPU core #1 have the four x1 slots.
+ */
+ if (mv78xx0_core_index() == 0)
+ mv78xx0_pcie_init(0, 1);
+ else
+ mv78xx0_pcie_init(1, 0);
+ }
+
+ return 0;
+}
+subsys_initcall(db78x00_pci_init);
+
+MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
+ /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+ .phys_io = MV78XX0_REGS_PHYS_BASE,
+ .io_pg_offst = ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = db78x00_init,
+ .map_io = mv78xx0_map_io,
+ .init_irq = mv78xx0_init_irq,
+ .timer = &mv78xx0_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
new file mode 100644
index 000000000000..60f4ee4d4532
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-mv78xx0/irq.c
+ *
+ * MV78xx0 IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/arch/mv78xx0.h>
+#include <asm/plat-orion/irq.h>
+#include "common.h"
+
+void __init mv78xx0_init_irq(void)
+{
+ orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
+ orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+}
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
new file mode 100644
index 000000000000..b78e1443159f
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -0,0 +1,312 @@
+/*
+ * arch/arm/mach-mv78xx0/pcie.c
+ *
+ * PCIe functions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mbus.h>
+#include <asm/mach/pci.h>
+#include <asm/plat-orion/pcie.h>
+#include "common.h"
+
+struct pcie_port {
+ u8 maj;
+ u8 min;
+ u8 root_bus_nr;
+ void __iomem *base;
+ spinlock_t conf_lock;
+ char io_space_name[16];
+ char mem_space_name[16];
+ struct resource res[2];
+};
+
+static struct pcie_port pcie_port[8];
+static int num_pcie_ports;
+static struct resource pcie_io_space;
+static struct resource pcie_mem_space;
+
+
+static void __init mv78xx0_pcie_preinit(void)
+{
+ int i;
+ u32 size_each;
+ u32 start;
+ int win;
+
+ pcie_io_space.name = "PCIe I/O Space";
+ pcie_io_space.start = MV78XX0_PCIE_IO_PHYS_BASE(0);
+ pcie_io_space.end =
+ MV78XX0_PCIE_IO_PHYS_BASE(0) + MV78XX0_PCIE_IO_SIZE * 8 - 1;
+ pcie_io_space.flags = IORESOURCE_IO;
+ if (request_resource(&iomem_resource, &pcie_io_space))
+ panic("can't allocate PCIe I/O space");
+
+ pcie_mem_space.name = "PCIe MEM Space";
+ pcie_mem_space.start = MV78XX0_PCIE_MEM_PHYS_BASE;
+ pcie_mem_space.end =
+ MV78XX0_PCIE_MEM_PHYS_BASE + MV78XX0_PCIE_MEM_SIZE - 1;
+ pcie_mem_space.flags = IORESOURCE_MEM;
+ if (request_resource(&iomem_resource, &pcie_mem_space))
+ panic("can't allocate PCIe MEM space");
+
+ for (i = 0; i < num_pcie_ports; i++) {
+ struct pcie_port *pp = pcie_port + i;
+
+ snprintf(pp->io_space_name, sizeof(pp->io_space_name),
+ "PCIe %d.%d I/O", pp->maj, pp->min);
+ pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
+ pp->res[0].name = pp->io_space_name;
+ pp->res[0].start = MV78XX0_PCIE_IO_PHYS_BASE(i);
+ pp->res[0].end = pp->res[0].start + MV78XX0_PCIE_IO_SIZE - 1;
+ pp->res[0].flags = IORESOURCE_IO;
+
+ snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
+ "PCIe %d.%d MEM", pp->maj, pp->min);
+ pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
+ pp->res[1].name = pp->mem_space_name;
+ pp->res[1].flags = IORESOURCE_MEM;
+ }
+
+ switch (num_pcie_ports) {
+ case 0:
+ size_each = 0;
+ break;
+
+ case 1:
+ size_each = 0x30000000;
+ break;
+
+ case 2 ... 3:
+ size_each = 0x10000000;
+ break;
+
+ case 4 ... 6:
+ size_each = 0x08000000;
+ break;
+
+ case 7:
+ size_each = 0x04000000;
+ break;
+
+ default:
+ panic("invalid number of PCIe ports");
+ }
+
+ start = MV78XX0_PCIE_MEM_PHYS_BASE;
+ for (i = 0; i < num_pcie_ports; i++) {
+ struct pcie_port *pp = pcie_port + i;
+
+ pp->res[1].start = start;
+ pp->res[1].end = start + size_each - 1;
+ start += size_each;
+ }
+
+ for (i = 0; i < num_pcie_ports; i++) {
+ struct pcie_port *pp = pcie_port + i;
+
+ if (request_resource(&pcie_io_space, &pp->res[0]))
+ panic("can't allocate PCIe I/O sub-space");
+
+ if (request_resource(&pcie_mem_space, &pp->res[1]))
+ panic("can't allocate PCIe MEM sub-space");
+ }
+
+ win = 0;
+ for (i = 0; i < num_pcie_ports; i++) {
+ struct pcie_port *pp = pcie_port + i;
+
+ mv78xx0_setup_pcie_io_win(win++, pp->res[0].start,
+ pp->res[0].end - pp->res[0].start + 1,
+ pp->maj, pp->min);
+
+ mv78xx0_setup_pcie_mem_win(win++, pp->res[1].start,
+ pp->res[1].end - pp->res[1].start + 1,
+ pp->maj, pp->min);
+ }
+}
+
+static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+ struct pcie_port *pp;
+
+ if (nr >= num_pcie_ports)
+ return 0;
+
+ pp = &pcie_port[nr];
+ pp->root_bus_nr = sys->busnr;
+
+ /*
+ * Generic PCIe unit setup.
+ */
+ orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
+ orion_pcie_setup(pp->base, &mv78xx0_mbus_dram_info);
+
+ sys->resource[0] = &pp->res[0];
+ sys->resource[1] = &pp->res[1];
+ sys->resource[2] = NULL;
+
+ return 1;
+}
+
+static struct pcie_port *bus_to_port(int bus)
+{
+ int i;
+
+ for (i = num_pcie_ports - 1; i >= 0; i--) {
+ int rbus = pcie_port[i].root_bus_nr;
+ if (rbus != -1 && rbus <= bus)
+ break;
+ }
+
+ return i >= 0 ? pcie_port + i : NULL;
+}
+
+static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
+{
+ /*
+ * Don't go out when trying to access nonexisting devices
+ * on the local bus.
+ */
+ if (bus == pp->root_bus_nr && dev > 1)
+ return 0;
+
+ return 1;
+}
+
+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+ int size, u32 *val)
+{
+ struct pcie_port *pp = bus_to_port(bus->number);
+ unsigned long flags;
+ int ret;
+
+ if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ spin_lock_irqsave(&pp->conf_lock, flags);
+ ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
+ spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+ return ret;
+}
+
+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+ int where, int size, u32 val)
+{
+ struct pcie_port *pp = bus_to_port(bus->number);
+ unsigned long flags;
+ int ret;
+
+ if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ spin_lock_irqsave(&pp->conf_lock, flags);
+ ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
+ spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+ return ret;
+}
+
+static struct pci_ops pcie_ops = {
+ .read = pcie_rd_conf,
+ .write = pcie_wr_conf,
+};
+
+static void __devinit rc_pci_fixup(struct pci_dev *dev)
+{
+ /*
+ * Prevent enumeration of root complex.
+ */
+ if (dev->bus->parent == NULL && dev->devfn == 0) {
+ int i;
+
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ dev->resource[i].start = 0;
+ dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+
+static struct pci_bus __init *
+mv78xx0_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+{
+ struct pci_bus *bus;
+
+ if (nr < num_pcie_ports) {
+ bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
+ } else {
+ bus = NULL;
+ BUG();
+ }
+
+ return bus;
+}
+
+static int __init mv78xx0_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct pcie_port *pp = bus_to_port(dev->bus->number);
+
+ return IRQ_MV78XX0_PCIE_00 + (pp->maj << 2) + pp->min;
+}
+
+static struct hw_pci mv78xx0_pci __initdata = {
+ .nr_controllers = 8,
+ .preinit = mv78xx0_pcie_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = mv78xx0_pcie_setup,
+ .scan = mv78xx0_pcie_scan_bus,
+ .map_irq = mv78xx0_pcie_map_irq,
+};
+
+static void __init add_pcie_port(int maj, int min, unsigned long base)
+{
+ printk(KERN_INFO "MV78xx0 PCIe port %d.%d: ", maj, min);
+
+ if (orion_pcie_link_up((void __iomem *)base)) {
+ struct pcie_port *pp = &pcie_port[num_pcie_ports++];
+
+ printk("link up\n");
+
+ pp->maj = maj;
+ pp->min = min;
+ pp->root_bus_nr = -1;
+ pp->base = (void __iomem *)base;
+ spin_lock_init(&pp->conf_lock);
+ memset(pp->res, 0, sizeof(pp->res));
+ } else {
+ printk("link down, ignoring\n");
+ }
+}
+
+void __init mv78xx0_pcie_init(int init_port0, int init_port1)
+{
+ if (init_port0) {
+ add_pcie_port(0, 0, PCIE00_VIRT_BASE);
+ if (!orion_pcie_x4_mode((void __iomem *)PCIE00_VIRT_BASE)) {
+ add_pcie_port(0, 1, PCIE01_VIRT_BASE);
+ add_pcie_port(0, 2, PCIE02_VIRT_BASE);
+ add_pcie_port(0, 3, PCIE03_VIRT_BASE);
+ }
+ }
+
+ if (init_port1) {
+ add_pcie_port(1, 0, PCIE10_VIRT_BASE);
+ if (!orion_pcie_x4_mode((void __iomem *)PCIE10_VIRT_BASE)) {
+ add_pcie_port(1, 1, PCIE11_VIRT_BASE);
+ add_pcie_port(1, 2, PCIE12_VIRT_BASE);
+ add_pcie_port(1, 3, PCIE13_VIRT_BASE);
+ }
+ }
+
+ pci_common_init(&mv78xx0_pci);
+}
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
new file mode 100644
index 000000000000..1eaa97cb716d
--- /dev/null
+++ b/arch/arm/mach-mx2/Kconfig
@@ -0,0 +1,39 @@
+comment "MX2 family CPU support"
+ depends on ARCH_MX2
+
+config MACH_MX27
+ bool "i.MX27 support"
+ depends on ARCH_MX2
+ help
+ This enables support for Freescale's MX2 based i.MX27 processor.
+
+comment "MX2 Platforms"
+ depends on ARCH_MX2
+
+config MACH_MX27ADS
+ bool "MX27ADS platform"
+ depends on MACH_MX27
+ help
+ Include support for MX27ADS platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_PCM038
+ bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
+ depends on MACH_MX27
+ help
+ Include support for phyCORE-i.MX27 (aka pcm038) platform. This
+ includes specific configurations for the module and its peripherals.
+
+choice
+ prompt "Baseboard"
+ depends on MACH_PCM038
+ default MACH_PCM970_BASEBOARD
+
+config MACH_PCM970_BASEBOARD
+ prompt "PHYTEC PCM970 development board"
+ bool
+ help
+ This adds board specific devices that can be found on Phytec's
+ PCM970 evaluation board.
+
+endchoice
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
new file mode 100644
index 000000000000..382d86080e86
--- /dev/null
+++ b/arch/arm/mach-mx2/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y := system.o generic.o devices.o serial.o
+
+obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
+obj-$(CONFIG_MACH_MX27) += clock_imx27.o
+
+obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
+obj-$(CONFIG_MACH_PCM038) += pcm038.o
+obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
diff --git a/arch/arm/mach-mx2/Makefile.boot b/arch/arm/mach-mx2/Makefile.boot
new file mode 100644
index 000000000000..696831dcd485
--- /dev/null
+++ b/arch/arm/mach-mx2/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0xA0008000
+params_phys-y := 0xA0000100
+initrd_phys-y := 0xA0800000
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
new file mode 100644
index 000000000000..0a29ef29c73a
--- /dev/null
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -0,0 +1,1626 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/common.h>
+#include <asm/div64.h>
+#include <asm/mach-types.h>
+
+#include "crm_regs.h"
+
+static struct clk ckil_clk;
+static struct clk mpll_clk;
+static struct clk mpll_main_clk[];
+static struct clk spll_clk;
+
+static int _clk_enable(struct clk *clk)
+{
+ unsigned long reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg |= 1 << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+
+ return 0;
+}
+
+static void _clk_disable(struct clk *clk)
+{
+ unsigned long reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(1 << clk->enable_shift);
+ __raw_writel(reg, clk->enable_reg);
+}
+
+static int _clk_spll_enable(struct clk *clk)
+{
+ unsigned long reg;
+
+ reg = __raw_readl(CCM_CSCR);
+ reg |= CCM_CSCR_SPEN;
+ __raw_writel(reg, CCM_CSCR);
+
+ while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0)
+ ;
+
+ return 0;
+}
+
+static void _clk_spll_disable(struct clk *clk)
+{
+ unsigned long reg;
+
+ reg = __raw_readl(CCM_CSCR);
+ reg &= ~CCM_CSCR_SPEN;
+ __raw_writel(reg, CCM_CSCR);
+}
+
+static void _clk_pccr01_enable(unsigned long mask0, unsigned long mask1)
+{
+ unsigned long reg;
+
+ reg = __raw_readl(CCM_PCCR0);
+ reg |= mask0;
+ __raw_writel(reg, CCM_PCCR0);
+
+ reg = __raw_readl(CCM_PCCR1);
+ reg |= mask1;
+ __raw_writel(reg, CCM_PCCR1);
+
+}
+
+static void _clk_pccr01_disable(unsigned long mask0, unsigned long mask1)
+{
+ unsigned long reg;
+
+ reg = __raw_readl(CCM_PCCR0);
+ reg &= ~mask0;
+ __raw_writel(reg, CCM_PCCR0);
+
+ reg = __raw_readl(CCM_PCCR1);
+ reg &= ~mask1;
+ __raw_writel(reg, CCM_PCCR1);
+}
+
+static void _clk_pccr10_enable(unsigned long mask1, unsigned long mask0)
+{
+ unsigned long reg;
+
+ reg = __raw_readl(CCM_PCCR1);
+ reg |= mask1;
+ __raw_writel(reg, CCM_PCCR1);
+
+ reg = __raw_readl(CCM_PCCR0);
+ reg |= mask0;
+ __raw_writel(reg, CCM_PCCR0);
+}
+
+static void _clk_pccr10_disable(unsigned long mask1, unsigned long mask0)
+{
+ unsigned long reg;
+
+ reg = __raw_readl(CCM_PCCR1);
+ reg &= ~mask1;
+ __raw_writel(reg, CCM_PCCR1);
+
+ reg = __raw_readl(CCM_PCCR0);
+ reg &= ~mask0;
+ __raw_writel(reg, CCM_PCCR0);
+}
+
+static int _clk_dma_enable(struct clk *clk)
+{
+ _clk_pccr01_enable(CCM_PCCR0_DMA_MASK, CCM_PCCR1_HCLK_DMA_MASK);
+
+ return 0;
+}
+
+static void _clk_dma_disable(struct clk *clk)
+{
+ _clk_pccr01_disable(CCM_PCCR0_DMA_MASK, CCM_PCCR1_HCLK_DMA_MASK);
+}
+
+static int _clk_rtic_enable(struct clk *clk)
+{
+ _clk_pccr01_enable(CCM_PCCR0_RTIC_MASK, CCM_PCCR1_HCLK_RTIC_MASK);
+
+ return 0;
+}
+
+static void _clk_rtic_disable(struct clk *clk)
+{
+ _clk_pccr01_disable(CCM_PCCR0_RTIC_MASK, CCM_PCCR1_HCLK_RTIC_MASK);
+}
+
+static int _clk_emma_enable(struct clk *clk)
+{
+ _clk_pccr01_enable(CCM_PCCR0_EMMA_MASK, CCM_PCCR1_HCLK_EMMA_MASK);
+
+ return 0;
+}
+
+static void _clk_emma_disable(struct clk *clk)
+{
+ _clk_pccr01_disable(CCM_PCCR0_EMMA_MASK, CCM_PCCR1_HCLK_EMMA_MASK);
+}
+
+static int _clk_slcdc_enable(struct clk *clk)
+{
+ _clk_pccr01_enable(CCM_PCCR0_SLCDC_MASK, CCM_PCCR1_HCLK_SLCDC_MASK);
+
+ return 0;
+}
+
+static void _clk_slcdc_disable(struct clk *clk)
+{
+ _clk_pccr01_disable(CCM_PCCR0_SLCDC_MASK, CCM_PCCR1_HCLK_SLCDC_MASK);
+}
+
+static int _clk_fec_enable(struct clk *clk)
+{
+ _clk_pccr01_enable(CCM_PCCR0_FEC_MASK, CCM_PCCR1_HCLK_FEC_MASK);
+
+ return 0;
+}
+
+static void _clk_fec_disable(struct clk *clk)
+{
+ _clk_pccr01_disable(CCM_PCCR0_FEC_MASK, CCM_PCCR1_HCLK_FEC_MASK);
+}
+
+static int _clk_vpu_enable(struct clk *clk)
+{
+ unsigned long reg;
+
+ reg = __raw_readl(CCM_PCCR1);
+ reg |= CCM_PCCR1_VPU_BAUD_MASK | CCM_PCCR1_HCLK_VPU_MASK;
+ __raw_writel(reg, CCM_PCCR1);
+
+ return 0;
+}
+
+static void _clk_vpu_disable(struct clk *clk)
+{
+ unsigned long reg;
+
+ reg = __raw_readl(CCM_PCCR1);
+ reg &= ~(CCM_PCCR1_VPU_BAUD_MASK | CCM_PCCR1_HCLK_VPU_MASK);
+ __raw_writel(reg, CCM_PCCR1);
+}
+
+static int _clk_sahara2_enable(struct clk *clk)
+{
+ _clk_pccr01_enable(CCM_PCCR0_SAHARA_MASK, CCM_PCCR1_HCLK_SAHARA_MASK);
+
+ return 0;
+}
+
+static void _clk_sahara2_disable(struct clk *clk)
+{
+ _clk_pccr01_disable(CCM_PCCR0_SAHARA_MASK, CCM_PCCR1_HCLK_SAHARA_MASK);
+}
+
+static int _clk_mstick1_enable(struct clk *clk)
+{
+ _clk_pccr10_enable(CCM_PCCR1_MSHC_BAUD_MASK, CCM_PCCR0_MSHC_MASK);
+
+ return 0;
+}
+
+static void _clk_mstick1_disable(struct clk *clk)
+{
+ _clk_pccr10_disable(CCM_PCCR1_MSHC_BAUD_MASK, CCM_PCCR0_MSHC_MASK);
+}
+
+#define CSCR() (__raw_readl(CCM_CSCR))
+#define PCDR0() (__raw_readl(CCM_PCDR0))
+#define PCDR1() (__raw_readl(CCM_PCDR1))
+
+static int _clk_cpu_set_parent(struct clk *clk, struct clk *parent)
+{
+ int cscr = CSCR();
+
+ if (clk->parent == parent)
+ return 0;
+
+ if (mx27_revision() >= CHIP_REV_2_0) {
+ if (parent == &mpll_main_clk[0]) {
+ cscr |= CCM_CSCR_ARM_SRC;
+ } else {
+ if (parent == &mpll_main_clk[1])
+ cscr &= ~CCM_CSCR_ARM_SRC;
+ else
+ return -EINVAL;
+ }
+ __raw_writel(cscr, CCM_CSCR);
+ } else
+ return -ENODEV;
+
+ clk->parent = parent;
+ return 0;
+}
+
+static unsigned long _clk_cpu_round_rate(struct clk *clk, unsigned long rate)
+{
+ int div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ div = parent_rate / rate;
+ if (parent_rate % rate)
+ div++;
+
+ if (div > 4)
+ div = 4;
+
+ return parent_rate / div;
+}
+
+static int _clk_cpu_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned int div;
+ uint32_t reg;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ div = parent_rate / rate;
+
+ if (div > 4 || div < 1 || ((parent_rate / div) != rate))
+ return -EINVAL;
+
+ div--;
+
+ reg = __raw_readl(CCM_CSCR);
+ if (mx27_revision() >= CHIP_REV_2_0) {
+ reg &= ~CCM_CSCR_ARM_MASK;
+ reg |= div << CCM_CSCR_ARM_OFFSET;
+ reg &= ~0x06;
+ __raw_writel(reg | 0x80000000, CCM_CSCR);
+ } else {
+ printk(KERN_ERR "Cant set CPU frequency!\n");
+ }
+
+ return 0;
+}
+
+static unsigned long _clk_perclkx_round_rate(struct clk *clk,
+ unsigned long rate)
+{
+ u32 div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ div = parent_rate / rate;
+ if (parent_rate % rate)
+ div++;
+
+ if (div > 64)
+ div = 64;
+
+ return parent_rate / div;
+}
+
+static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg;
+ u32 div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ if (clk->id < 0 || clk->id > 3)
+ return -EINVAL;
+
+ div = parent_rate / rate;
+ if (div > 64 || div < 1 || ((parent_rate / div) != rate))
+ return -EINVAL;
+ div--;
+
+ reg =
+ __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK <<
+ (clk->id << 3));
+ reg |= div << (clk->id << 3);
+ __raw_writel(reg, CCM_PCDR1);
+
+ return 0;
+}
+
+static unsigned long _clk_usb_recalc(struct clk *clk)
+{
+ unsigned long usb_pdf;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET;
+
+ return parent_rate / (usb_pdf + 1U);
+}
+
+static unsigned long _clk_ssi1_recalc(struct clk *clk)
+{
+ unsigned long ssi1_pdf;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ ssi1_pdf = (PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK) >>
+ CCM_PCDR0_SSI1BAUDDIV_OFFSET;
+
+ if (mx27_revision() >= CHIP_REV_2_0)
+ ssi1_pdf += 4;
+ else
+ ssi1_pdf = (ssi1_pdf < 2) ? 124UL : ssi1_pdf;
+
+ return 2UL * parent_rate / ssi1_pdf;
+}
+
+static unsigned long _clk_ssi2_recalc(struct clk *clk)
+{
+ unsigned long ssi2_pdf;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ ssi2_pdf = (PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >>
+ CCM_PCDR0_SSI2BAUDDIV_OFFSET;
+
+ if (mx27_revision() >= CHIP_REV_2_0)
+ ssi2_pdf += 4;
+ else
+ ssi2_pdf = (ssi2_pdf < 2) ? 124UL : ssi2_pdf;
+
+ return 2UL * parent_rate / ssi2_pdf;
+}
+
+static unsigned long _clk_nfc_recalc(struct clk *clk)
+{
+ unsigned long nfc_pdf;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ if (mx27_revision() >= CHIP_REV_2_0) {
+ nfc_pdf =
+ (PCDR0() & CCM_PCDR0_NFCDIV2_MASK) >>
+ CCM_PCDR0_NFCDIV2_OFFSET;
+ } else {
+ nfc_pdf =
+ (PCDR0() & CCM_PCDR0_NFCDIV_MASK) >>
+ CCM_PCDR0_NFCDIV_OFFSET;
+ }
+
+ return parent_rate / (nfc_pdf + 1);
+}
+
+static unsigned long _clk_vpu_recalc(struct clk *clk)
+{
+ unsigned long vpu_pdf;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ if (mx27_revision() >= CHIP_REV_2_0) {
+ vpu_pdf =
+ (PCDR0() & CCM_PCDR0_VPUDIV2_MASK) >>
+ CCM_PCDR0_VPUDIV2_OFFSET;
+ vpu_pdf += 4;
+ } else {
+ vpu_pdf =
+ (PCDR0() & CCM_PCDR0_VPUDIV_MASK) >>
+ CCM_PCDR0_VPUDIV_OFFSET;
+ vpu_pdf = (vpu_pdf < 2) ? 124 : vpu_pdf;
+ }
+ return 2UL * parent_rate / vpu_pdf;
+}
+
+static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
+{
+ return clk->parent->round_rate(clk->parent, rate);
+}
+
+static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
+{
+ return clk->parent->set_rate(clk->parent, rate);
+}
+
+/* in Hz */
+static unsigned long external_high_reference = 26000000;
+
+static unsigned long get_high_reference_clock_rate(struct clk *clk)
+{
+ return external_high_reference;
+}
+
+/*
+ * the high frequency external clock reference
+ * Default case is 26MHz. Could be changed at runtime
+ * with a call to change_external_high_reference()
+ */
+static struct clk ckih_clk = {
+ .name = "ckih",
+ .get_rate = get_high_reference_clock_rate,
+};
+
+/* in Hz */
+static unsigned long external_low_reference = 32768;
+
+static unsigned long get_low_reference_clock_rate(struct clk *clk)
+{
+ return external_low_reference;
+}
+
+/*
+ * the low frequency external clock reference
+ * Default case is 32.768kHz Could be changed at runtime
+ * with a call to change_external_low_reference()
+ */
+static struct clk ckil_clk = {
+ .name = "ckil",
+ .get_rate = get_low_reference_clock_rate,
+};
+
+static unsigned long get_mpll_clk(struct clk *clk)
+{
+ uint32_t reg;
+ unsigned long ref_clk;
+ unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
+ unsigned long long temp;
+
+ ref_clk = clk_get_rate(clk->parent);
+
+ reg = __raw_readl(CCM_MPCTL0);
+ pdf = (reg & CCM_MPCTL0_PD_MASK) >> CCM_MPCTL0_PD_OFFSET;
+ mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET;
+ mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET;
+ mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET;
+
+ mfi = (mfi <= 5) ? 5 : mfi;
+ temp = 2LL * ref_clk * mfn;
+ do_div(temp, mfd + 1);
+ temp = 2LL * ref_clk * mfi + temp;
+ do_div(temp, pdf + 1);
+
+ return (unsigned long)temp;
+}
+
+static struct clk mpll_clk = {
+ .name = "mpll",
+ .parent = &ckih_clk,
+ .get_rate = get_mpll_clk,
+};
+
+static unsigned long _clk_mpll_main_get_rate(struct clk *clk)
+{
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ /* i.MX27 TO2:
+ * clk->id == 0: arm clock source path 1 which is from 2*MPLL/DIV_2
+ * clk->id == 1: arm clock source path 2 which is from 2*MPLL/DIV_3
+ */
+
+ if (mx27_revision() >= CHIP_REV_2_0 && clk->id == 1)
+ return 2UL * parent_rate / 3UL;
+
+ return parent_rate;
+}
+
+static struct clk mpll_main_clk[] = {
+ {
+ /* For i.MX27 TO2, it is the MPLL path 1 of ARM core
+ * It provide the clock source whose rate is same as MPLL
+ */
+ .name = "mpll_main",
+ .id = 0,
+ .parent = &mpll_clk,
+ .get_rate = _clk_mpll_main_get_rate
+ }, {
+ /* For i.MX27 TO2, it is the MPLL path 2 of ARM core
+ * It provide the clock source whose rate is same MPLL * 2/3
+ */
+ .name = "mpll_main",
+ .id = 1,
+ .parent = &mpll_clk,
+ .get_rate = _clk_mpll_main_get_rate
+ }
+};
+
+static unsigned long get_spll_clk(struct clk *clk)
+{
+ uint32_t reg;
+ unsigned long ref_clk;
+ unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
+ unsigned long long temp;
+
+ ref_clk = clk_get_rate(clk->parent);
+
+ reg = __raw_readl(CCM_SPCTL0);
+ /*TODO: This is TO2 Bug */
+ if (mx27_revision() >= CHIP_REV_2_0)
+ __raw_writel(reg, CCM_SPCTL0);
+
+ pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET;
+ mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET;
+ mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET;
+ mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET;
+
+ mfi = (mfi <= 5) ? 5 : mfi;
+ temp = 2LL * ref_clk * mfn;
+ do_div(temp, mfd + 1);
+ temp = 2LL * ref_clk * mfi + temp;
+ do_div(temp, pdf + 1);
+
+ return (unsigned long)temp;
+}
+
+static struct clk spll_clk = {
+ .name = "spll",
+ .parent = &ckih_clk,
+ .get_rate = get_spll_clk,
+ .enable = _clk_spll_enable,
+ .disable = _clk_spll_disable,
+};
+
+static unsigned long get_cpu_clk(struct clk *clk)
+{
+ u32 div;
+ unsigned long rate;
+
+ if (mx27_revision() >= CHIP_REV_2_0)
+ div = (CSCR() & CCM_CSCR_ARM_MASK) >> CCM_CSCR_ARM_OFFSET;
+ else
+ div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET;
+
+ rate = clk_get_rate(clk->parent);
+ return rate / (div + 1);
+}
+
+static struct clk cpu_clk = {
+ .name = "cpu_clk",
+ .parent = &mpll_main_clk[1],
+ .set_parent = _clk_cpu_set_parent,
+ .round_rate = _clk_cpu_round_rate,
+ .get_rate = get_cpu_clk,
+ .set_rate = _clk_cpu_set_rate,
+};
+
+static unsigned long get_ahb_clk(struct clk *clk)
+{
+ unsigned long rate;
+ unsigned long bclk_pdf;
+
+ if (mx27_revision() >= CHIP_REV_2_0)
+ bclk_pdf = (CSCR() & CCM_CSCR_AHB_MASK)
+ >> CCM_CSCR_AHB_OFFSET;
+ else
+ bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK)
+ >> CCM_CSCR_BCLK_OFFSET;
+
+ rate = clk_get_rate(clk->parent);
+ return rate / (bclk_pdf + 1);
+}
+
+static struct clk ahb_clk = {
+ .name = "ahb_clk",
+ .parent = &mpll_main_clk[1],
+ .get_rate = get_ahb_clk,
+};
+
+static unsigned long get_ipg_clk(struct clk *clk)
+{
+ unsigned long rate;
+ unsigned long ipg_pdf;
+
+ if (mx27_revision() >= CHIP_REV_2_0)
+ return clk_get_rate(clk->parent);
+ else
+ ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET;
+
+ rate = clk_get_rate(clk->parent);
+ return rate / (ipg_pdf + 1);
+}
+
+static struct clk ipg_clk = {
+ .name = "ipg_clk",
+ .parent = &ahb_clk,
+ .get_rate = get_ipg_clk,
+};
+
+static unsigned long _clk_perclkx_recalc(struct clk *clk)
+{
+ unsigned long perclk_pdf;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ if (clk->id < 0 || clk->id > 3)
+ return 0;
+
+ perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK;
+
+ return parent_rate / (perclk_pdf + 1);
+}
+
+static struct clk per_clk[] = {
+ {
+ .name = "per_clk",
+ .id = 0,
+ .parent = &mpll_main_clk[1],
+ .get_rate = _clk_perclkx_recalc,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR1,
+ .enable_shift = CCM_PCCR1_PERCLK1_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .name = "per_clk",
+ .id = 1,
+ .parent = &mpll_main_clk[1],
+ .get_rate = _clk_perclkx_recalc,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR1,
+ .enable_shift = CCM_PCCR1_PERCLK2_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .name = "per_clk",
+ .id = 2,
+ .parent = &mpll_main_clk[1],
+ .round_rate = _clk_perclkx_round_rate,
+ .set_rate = _clk_perclkx_set_rate,
+ .get_rate = _clk_perclkx_recalc,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR1,
+ .enable_shift = CCM_PCCR1_PERCLK3_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .name = "per_clk",
+ .id = 3,
+ .parent = &mpll_main_clk[1],
+ .round_rate = _clk_perclkx_round_rate,
+ .set_rate = _clk_perclkx_set_rate,
+ .get_rate = _clk_perclkx_recalc,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR1,
+ .enable_shift = CCM_PCCR1_PERCLK4_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+struct clk uart1_clk[] = {
+ {
+ .name = "uart_clk",
+ .id = 0,
+ .parent = &per_clk[0],
+ .secondary = &uart1_clk[1],
+ }, {
+ .name = "uart_ipg_clk",
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR1,
+ .enable_shift = CCM_PCCR1_UART1_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+struct clk uart2_clk[] = {
+ {
+ .name = "uart_clk",
+ .id = 1,
+ .parent = &per_clk[0],
+ .secondary = &uart2_clk[1],
+ }, {
+ .name = "uart_ipg_clk",
+ .id = 1,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR1,
+ .enable_shift = CCM_PCCR1_UART2_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+struct clk uart3_clk[] = {
+ {
+ .name = "uart_clk",
+ .id = 2,
+ .parent = &per_clk[0],
+ .secondary = &uart3_clk[1],
+ }, {
+ .name = "uart_ipg_clk",
+ .id = 2,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR1,
+ .enable_shift = CCM_PCCR1_UART3_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+struct clk uart4_clk[] = {
+ {
+ .name = "uart_clk",
+ .id = 3,
+ .parent = &per_clk[0],
+ .secondary = &uart4_clk[1],
+ }, {
+ .name = "uart_ipg_clk",
+ .id = 3,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR1,
+ .enable_shift = CCM_PCCR1_UART4_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+struct clk uart5_clk[] = {
+ {
+ .name = "uart_clk",
+ .id = 4,
+ .parent = &per_clk[0],
+ .secondary = &uart5_clk[1],
+ }, {
+ .name = "uart_ipg_clk",
+ .id = 4,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR1,
+ .enable_shift = CCM_PCCR1_UART5_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+struct clk uart6_clk[] = {
+ {
+ .name = "uart_clk",
+ .id = 5,
+ .parent = &per_clk[0],
+ .secondary = &uart6_clk[1],
+ }, {
+ .name = "uart_ipg_clk",
+ .id = 5,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR1,
+ .enable_shift = CCM_PCCR1_UART6_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk gpt1_clk[] = {
+ {
+ .name = "gpt_clk",
+ .id = 0,
+ .parent = &per_clk[0],
+ .secondary = &gpt1_clk[1],
+ }, {
+ .name = "gpt_ipg_clk",
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_GPT1_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk gpt2_clk[] = {
+ {
+ .name = "gpt_clk",
+ .id = 1,
+ .parent = &per_clk[0],
+ .secondary = &gpt2_clk[1],
+ }, {
+ .name = "gpt_ipg_clk",
+ .id = 1,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_GPT2_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk gpt3_clk[] = {
+ {
+ .name = "gpt_clk",
+ .id = 2,
+ .parent = &per_clk[0],
+ .secondary = &gpt3_clk[1],
+ }, {
+ .name = "gpt_ipg_clk",
+ .id = 2,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_GPT3_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk gpt4_clk[] = {
+ {
+ .name = "gpt_clk",
+ .id = 3,
+ .parent = &per_clk[0],
+ .secondary = &gpt4_clk[1],
+ }, {
+ .name = "gpt_ipg_clk",
+ .id = 3,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_GPT4_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk gpt5_clk[] = {
+ {
+ .name = "gpt_clk",
+ .id = 4,
+ .parent = &per_clk[0],
+ .secondary = &gpt5_clk[1],
+ }, {
+ .name = "gpt_ipg_clk",
+ .id = 4,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_GPT5_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk gpt6_clk[] = {
+ {
+ .name = "gpt_clk",
+ .id = 5,
+ .parent = &per_clk[0],
+ .secondary = &gpt6_clk[1],
+ }, {
+ .name = "gpt_ipg_clk",
+ .id = 5,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_GPT6_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk pwm_clk[] = {
+ {
+ .name = "pwm_clk",
+ .parent = &per_clk[0],
+ .secondary = &pwm_clk[1],
+ }, {
+ .name = "pwm_clk",
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_PWM_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk sdhc1_clk[] = {
+ {
+ .name = "sdhc_clk",
+ .id = 0,
+ .parent = &per_clk[1],
+ .secondary = &sdhc1_clk[1],
+ }, {
+ .name = "sdhc_ipg_clk",
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_SDHC1_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk sdhc2_clk[] = {
+ {
+ .name = "sdhc_clk",
+ .id = 1,
+ .parent = &per_clk[1],
+ .secondary = &sdhc2_clk[1],
+ }, {
+ .name = "sdhc_ipg_clk",
+ .id = 1,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_SDHC2_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk sdhc3_clk[] = {
+ {
+ .name = "sdhc_clk",
+ .id = 2,
+ .parent = &per_clk[1],
+ .secondary = &sdhc3_clk[1],
+ }, {
+ .name = "sdhc_ipg_clk",
+ .id = 2,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_SDHC3_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk cspi1_clk[] = {
+ {
+ .name = "cspi_clk",
+ .id = 0,
+ .parent = &per_clk[1],
+ .secondary = &cspi1_clk[1],
+ }, {
+ .name = "cspi_ipg_clk",
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_CSPI1_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk cspi2_clk[] = {
+ {
+ .name = "cspi_clk",
+ .id = 1,
+ .parent = &per_clk[1],
+ .secondary = &cspi2_clk[1],
+ }, {
+ .name = "cspi_ipg_clk",
+ .id = 1,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_CSPI2_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk cspi3_clk[] = {
+ {
+ .name = "cspi_clk",
+ .id = 2,
+ .parent = &per_clk[1],
+ .secondary = &cspi3_clk[1],
+ }, {
+ .name = "cspi_ipg_clk",
+ .id = 2,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_CSPI3_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk lcdc_clk[] = {
+ {
+ .name = "lcdc_clk",
+ .parent = &per_clk[2],
+ .secondary = &lcdc_clk[1],
+ .round_rate = _clk_parent_round_rate,
+ .set_rate = _clk_parent_set_rate,
+ }, {
+ .name = "lcdc_ipg_clk",
+ .parent = &ipg_clk,
+ .secondary = &lcdc_clk[2],
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_LCDC_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .name = "lcdc_ahb_clk",
+ .parent = &ahb_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR1,
+ .enable_shift = CCM_PCCR1_HCLK_LCDC_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk csi_clk[] = {
+ {
+ .name = "csi_perclk",
+ .parent = &per_clk[3],
+ .secondary = &csi_clk[1],
+ .round_rate = _clk_parent_round_rate,
+ .set_rate = _clk_parent_set_rate,
+ }, {
+ .name = "csi_ahb_clk",
+ .parent = &ahb_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR1,
+ .enable_shift = CCM_PCCR1_HCLK_CSI_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk usb_clk[] = {
+ {
+ .name = "usb_clk",
+ .parent = &spll_clk,
+ .get_rate = _clk_usb_recalc,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR1,
+ .enable_shift = CCM_PCCR1_USBOTG_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .name = "usb_ahb_clk",
+ .parent = &ahb_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR1,
+ .enable_shift = CCM_PCCR1_HCLK_USBOTG_OFFSET,
+ .disable = _clk_disable,
+ }
+};
+
+static struct clk ssi1_clk[] = {
+ {
+ .name = "ssi_clk",
+ .id = 0,
+ .parent = &mpll_main_clk[1],
+ .secondary = &ssi1_clk[1],
+ .get_rate = _clk_ssi1_recalc,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR1,
+ .enable_shift = CCM_PCCR1_SSI1_BAUD_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .name = "ssi_ipg_clk",
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_SSI1_IPG_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk ssi2_clk[] = {
+ {
+ .name = "ssi_clk",
+ .id = 1,
+ .parent = &mpll_main_clk[1],
+ .secondary = &ssi2_clk[1],
+ .get_rate = _clk_ssi2_recalc,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR1,
+ .enable_shift = CCM_PCCR1_SSI2_BAUD_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .name = "ssi_ipg_clk",
+ .id = 1,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_SSI2_IPG_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk nfc_clk = {
+ .name = "nfc_clk",
+ .parent = &cpu_clk,
+ .get_rate = _clk_nfc_recalc,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR1,
+ .enable_shift = CCM_PCCR1_NFC_BAUD_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk vpu_clk = {
+ .name = "vpu_clk",
+ .parent = &mpll_main_clk[1],
+ .get_rate = _clk_vpu_recalc,
+ .enable = _clk_vpu_enable,
+ .disable = _clk_vpu_disable,
+};
+
+static struct clk dma_clk = {
+ .name = "dma_clk",
+ .parent = &ahb_clk,
+ .enable = _clk_dma_enable,
+ .disable = _clk_dma_disable,
+};
+
+static struct clk rtic_clk = {
+ .name = "rtic_clk",
+ .parent = &ahb_clk,
+ .enable = _clk_rtic_enable,
+ .disable = _clk_rtic_disable,
+};
+
+static struct clk brom_clk = {
+ .name = "brom_clk",
+ .parent = &ahb_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR1,
+ .enable_shift = CCM_PCCR1_HCLK_BROM_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk emma_clk = {
+ .name = "emma_clk",
+ .parent = &ahb_clk,
+ .enable = _clk_emma_enable,
+ .disable = _clk_emma_disable,
+};
+
+static struct clk slcdc_clk = {
+ .name = "slcdc_clk",
+ .parent = &ahb_clk,
+ .enable = _clk_slcdc_enable,
+ .disable = _clk_slcdc_disable,
+};
+
+static struct clk fec_clk = {
+ .name = "fec_clk",
+ .parent = &ahb_clk,
+ .enable = _clk_fec_enable,
+ .disable = _clk_fec_disable,
+};
+
+static struct clk emi_clk = {
+ .name = "emi_clk",
+ .parent = &ahb_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR1,
+ .enable_shift = CCM_PCCR1_HCLK_EMI_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk sahara2_clk = {
+ .name = "sahara_clk",
+ .parent = &ahb_clk,
+ .enable = _clk_sahara2_enable,
+ .disable = _clk_sahara2_disable,
+};
+
+static struct clk ata_clk = {
+ .name = "ata_clk",
+ .parent = &ahb_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR1,
+ .enable_shift = CCM_PCCR1_HCLK_ATA_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk mstick1_clk = {
+ .name = "mstick1_clk",
+ .parent = &ipg_clk,
+ .enable = _clk_mstick1_enable,
+ .disable = _clk_mstick1_disable,
+};
+
+static struct clk wdog_clk = {
+ .name = "wdog_clk",
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR1,
+ .enable_shift = CCM_PCCR1_WDT_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk gpio_clk = {
+ .name = "gpio_clk",
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR1,
+ .enable_shift = CCM_PCCR0_GPIO_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk i2c_clk[] = {
+ {
+ .name = "i2c_clk",
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_I2C1_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .name = "i2c_clk",
+ .id = 1,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_I2C2_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk iim_clk = {
+ .name = "iim_clk",
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_IIM_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk kpp_clk = {
+ .name = "kpp_clk",
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_KPP_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk owire_clk = {
+ .name = "owire_clk",
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_OWIRE_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk rtc_clk = {
+ .name = "rtc_clk",
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_RTC_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk scc_clk = {
+ .name = "scc_clk",
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR0,
+ .enable_shift = CCM_PCCR0_SCC_OFFSET,
+ .disable = _clk_disable,
+};
+
+static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
+{
+ u32 div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+ div = parent_rate / rate;
+ if (parent_rate % rate)
+ div++;
+
+ if (div > 8)
+ div = 8;
+
+ return parent_rate / div;
+}
+
+static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg;
+ u32 div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ div = parent_rate / rate;
+
+ if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+ return -EINVAL;
+ div--;
+
+ reg = __raw_readl(CCM_PCDR0) & ~CCM_PCDR0_CLKODIV_MASK;
+ reg |= div << CCM_PCDR0_CLKODIV_OFFSET;
+ __raw_writel(reg, CCM_PCDR0);
+
+ return 0;
+}
+
+static unsigned long _clk_clko_recalc(struct clk *clk)
+{
+ u32 div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_CLKODIV_MASK >>
+ CCM_PCDR0_CLKODIV_OFFSET;
+ div++;
+
+ return parent_rate / div;
+}
+
+static int _clk_clko_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg;
+
+ reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK;
+
+ if (parent == &ckil_clk)
+ reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &ckih_clk)
+ reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == mpll_clk.parent)
+ reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == spll_clk.parent)
+ reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &mpll_clk)
+ reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &spll_clk)
+ reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &cpu_clk)
+ reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &ahb_clk)
+ reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &ipg_clk)
+ reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &per_clk[0])
+ reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &per_clk[1])
+ reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &per_clk[2])
+ reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &per_clk[3])
+ reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &ssi1_clk[0])
+ reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &ssi2_clk[0])
+ reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &nfc_clk)
+ reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &mstick1_clk)
+ reg |= 0x11 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &vpu_clk)
+ reg |= 0x12 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &usb_clk[0])
+ reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET;
+ else
+ return -EINVAL;
+
+ __raw_writel(reg, CCM_CCSR);
+
+ return 0;
+}
+
+static int _clk_clko_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(CCM_PCDR0) | CCM_PCDR0_CLKO_EN;
+ __raw_writel(reg, CCM_PCDR0);
+
+ return 0;
+}
+
+static void _clk_clko_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(CCM_PCDR0) & ~CCM_PCDR0_CLKO_EN;
+ __raw_writel(reg, CCM_PCDR0);
+}
+
+static struct clk clko_clk = {
+ .name = "clko_clk",
+ .get_rate = _clk_clko_recalc,
+ .set_rate = _clk_clko_set_rate,
+ .round_rate = _clk_clko_round_rate,
+ .set_parent = _clk_clko_set_parent,
+ .enable = _clk_clko_enable,
+ .disable = _clk_clko_disable,
+};
+
+static struct clk *mxc_clks[] = {
+ &ckih_clk,
+ &ckil_clk,
+ &mpll_clk,
+ &mpll_main_clk[0],
+ &mpll_main_clk[1],
+ &spll_clk,
+ &cpu_clk,
+ &ahb_clk,
+ &ipg_clk,
+ &per_clk[0],
+ &per_clk[1],
+ &per_clk[2],
+ &per_clk[3],
+ &clko_clk,
+ &uart1_clk[0],
+ &uart1_clk[1],
+ &uart2_clk[0],
+ &uart2_clk[1],
+ &uart3_clk[0],
+ &uart3_clk[1],
+ &uart4_clk[0],
+ &uart4_clk[1],
+ &uart5_clk[0],
+ &uart5_clk[1],
+ &uart6_clk[0],
+ &uart6_clk[1],
+ &gpt1_clk[0],
+ &gpt1_clk[1],
+ &gpt2_clk[0],
+ &gpt2_clk[1],
+ &gpt3_clk[0],
+ &gpt3_clk[1],
+ &gpt4_clk[0],
+ &gpt4_clk[1],
+ &gpt5_clk[0],
+ &gpt5_clk[1],
+ &gpt6_clk[0],
+ &gpt6_clk[1],
+ &pwm_clk[0],
+ &pwm_clk[1],
+ &sdhc1_clk[0],
+ &sdhc1_clk[1],
+ &sdhc2_clk[0],
+ &sdhc2_clk[1],
+ &sdhc3_clk[0],
+ &sdhc3_clk[1],
+ &cspi1_clk[0],
+ &cspi1_clk[1],
+ &cspi2_clk[0],
+ &cspi2_clk[1],
+ &cspi3_clk[0],
+ &cspi3_clk[1],
+ &lcdc_clk[0],
+ &lcdc_clk[1],
+ &lcdc_clk[2],
+ &csi_clk[0],
+ &csi_clk[1],
+ &usb_clk[0],
+ &usb_clk[1],
+ &ssi1_clk[0],
+ &ssi1_clk[1],
+ &ssi2_clk[0],
+ &ssi2_clk[1],
+ &nfc_clk,
+ &vpu_clk,
+ &dma_clk,
+ &rtic_clk,
+ &brom_clk,
+ &emma_clk,
+ &slcdc_clk,
+ &fec_clk,
+ &emi_clk,
+ &sahara2_clk,
+ &ata_clk,
+ &mstick1_clk,
+ &wdog_clk,
+ &gpio_clk,
+ &i2c_clk[0],
+ &i2c_clk[1],
+ &iim_clk,
+ &kpp_clk,
+ &owire_clk,
+ &rtc_clk,
+ &scc_clk,
+};
+
+void __init change_external_low_reference(unsigned long new_ref)
+{
+ external_low_reference = new_ref;
+}
+
+unsigned long __init clk_early_get_timer_rate(void)
+{
+ return clk_get_rate(&per_clk[0]);
+}
+
+static void __init probe_mxc_clocks(void)
+{
+ int i;
+
+ if (mx27_revision() >= CHIP_REV_2_0) {
+ if (CSCR() & 0x8000)
+ cpu_clk.parent = &mpll_main_clk[0];
+
+ if (!(CSCR() & 0x00800000))
+ ssi2_clk[0].parent = &spll_clk;
+
+ if (!(CSCR() & 0x00400000))
+ ssi1_clk[0].parent = &spll_clk;
+
+ if (!(CSCR() & 0x00200000))
+ vpu_clk.parent = &spll_clk;
+ } else {
+ cpu_clk.parent = &mpll_clk;
+ cpu_clk.set_parent = NULL;
+ cpu_clk.round_rate = NULL;
+ cpu_clk.set_rate = NULL;
+ ahb_clk.parent = &mpll_clk;
+
+ for (i = 0; i < sizeof(per_clk) / sizeof(per_clk[0]); i++)
+ per_clk[i].parent = &mpll_clk;
+
+ ssi1_clk[0].parent = &mpll_clk;
+ ssi2_clk[0].parent = &mpll_clk;
+
+ vpu_clk.parent = &mpll_clk;
+ }
+}
+
+/*
+ * must be called very early to get information about the
+ * available clock rate when the timer framework starts
+ */
+int __init mxc_clocks_init(unsigned long fref)
+{
+ u32 cscr;
+ struct clk **clkp;
+
+ external_high_reference = fref;
+
+ /* detect clock reference for both system PLL */
+ cscr = CSCR();
+ if (cscr & CCM_CSCR_MCU)
+ mpll_clk.parent = &ckih_clk;
+ else
+ mpll_clk.parent = &ckil_clk;
+
+ if (cscr & CCM_CSCR_SP)
+ spll_clk.parent = &ckih_clk;
+ else
+ spll_clk.parent = &ckil_clk;
+
+ probe_mxc_clocks();
+
+ per_clk[0].enable(&per_clk[0]);
+ gpt1_clk[1].enable(&gpt1_clk[1]);
+
+ for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
+ clk_register(*clkp);
+
+ /* Turn off all possible clocks */
+ __raw_writel(CCM_PCCR0_GPT1_MASK, CCM_PCCR0);
+ __raw_writel(CCM_PCCR1_PERCLK1_MASK | CCM_PCCR1_HCLK_EMI_MASK,
+ CCM_PCCR1);
+ spll_clk.disable(&spll_clk);
+
+ /* This will propagate to all children and init all the clock rates */
+
+ clk_enable(&emi_clk);
+ clk_enable(&gpio_clk);
+ clk_enable(&iim_clk);
+ clk_enable(&gpt1_clk[0]);
+#ifdef CONFIG_DEBUG_LL_CONSOLE
+ clk_enable(&uart1_clk[0]);
+#endif
+ return 0;
+}
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c
new file mode 100644
index 000000000000..d6b5c2e3377f
--- /dev/null
+++ b/arch/arm/mach-mx2/cpu_imx27.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+/*
+ * i.MX27 specific CPU detection code
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+
+#include <asm/hardware.h>
+
+#include "crm_regs.h"
+
+static int cpu_silicon_rev = -1;
+static int cpu_partnumber;
+
+static void query_silicon_parameter(void)
+{
+ u32 val;
+ /*
+ * now we have access to the IO registers. As we need
+ * the silicon revision very early we read it here to
+ * avoid any further hooks
+ */
+ val = __raw_readl(IO_ADDRESS(SYSCTRL_BASE_ADDR) + SYS_CHIP_ID);
+
+ cpu_silicon_rev = (int)(val >> 28);
+ cpu_partnumber = (int)((val >> 12) & 0xFFFF);
+}
+
+/*
+ * Returns:
+ * the silicon revision of the cpu
+ * -EINVAL - not a mx27
+ */
+int mx27_revision(void)
+{
+ if (cpu_silicon_rev == -1)
+ query_silicon_parameter();
+
+ if (cpu_partnumber != 0x8821)
+ return -EINVAL;
+
+ return cpu_silicon_rev;
+}
+EXPORT_SYMBOL(mx27_revision);
diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h
new file mode 100644
index 000000000000..a40a9b950ce9
--- /dev/null
+++ b/arch/arm/mach-mx2/crm_regs.h
@@ -0,0 +1,273 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__
+#define __ARCH_ARM_MACH_MX2_CRM_REGS_H__
+
+#include <asm/arch/hardware.h>
+
+/* Register offsets */
+#define CCM_CSCR (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
+#define CCM_MPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
+#define CCM_MPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
+#define CCM_SPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
+#define CCM_SPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
+#define CCM_OSC26MCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
+#define CCM_PCDR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
+#define CCM_PCDR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
+#define CCM_PCCR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
+#define CCM_PCCR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
+#define CCM_CCSR (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
+#define CCM_PMCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
+#define CCM_PMCOUNT (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
+#define CCM_WKGDCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
+
+#define CCM_CSCR_USB_OFFSET 28
+#define CCM_CSCR_USB_MASK (0x7 << 28)
+#define CCM_CSCR_SD_OFFSET 24
+#define CCM_CSCR_SD_MASK (0x3 << 24)
+#define CCM_CSCR_SSI2 (1 << 23)
+#define CCM_CSCR_SSI2_OFFSET 23
+#define CCM_CSCR_SSI1 (1 << 22)
+#define CCM_CSCR_SSI1_OFFSET 22
+#define CCM_CSCR_VPU (1 << 21)
+#define CCM_CSCR_VPU_OFFSET 21
+#define CCM_CSCR_MSHC (1 << 20)
+#define CCM_CSCR_SPLLRES (1 << 19)
+#define CCM_CSCR_MPLLRES (1 << 18)
+#define CCM_CSCR_SP (1 << 17)
+#define CCM_CSCR_MCU (1 << 16)
+/* CCM_CSCR_ARM_xxx just be avaliable on i.MX27 TO2*/
+#define CCM_CSCR_ARM_SRC (1 << 15)
+#define CCM_CSCR_ARM_OFFSET 12
+#define CCM_CSCR_ARM_MASK (0x3 << 12)
+/* CCM_CSCR_ARM_xxx just be avaliable on i.MX27 TO2*/
+#define CCM_CSCR_PRESC_OFFSET 13
+#define CCM_CSCR_PRESC_MASK (0x7 << 13)
+#define CCM_CSCR_BCLK_OFFSET 9
+#define CCM_CSCR_BCLK_MASK (0xf << 9)
+#define CCM_CSCR_IPDIV_OFFSET 8
+#define CCM_CSCR_IPDIV (1 << 8)
+/* CCM_CSCR_AHB_xxx just be avaliable on i.MX27 TO2*/
+#define CCM_CSCR_AHB_OFFSET 8
+#define CCM_CSCR_AHB_MASK (0x3 << 8)
+/* CCM_CSCR_AHB_xxx just be avaliable on i.MX27 TO2*/
+#define CCM_CSCR_OSC26MDIV (1 << 4)
+#define CCM_CSCR_OSC26M (1 << 3)
+#define CCM_CSCR_FPM (1 << 2)
+#define CCM_CSCR_SPEN (1 << 1)
+#define CCM_CSCR_MPEN 1
+
+#define CCM_MPCTL0_CPLM (1 << 31)
+#define CCM_MPCTL0_PD_OFFSET 26
+#define CCM_MPCTL0_PD_MASK (0xf << 26)
+#define CCM_MPCTL0_MFD_OFFSET 16
+#define CCM_MPCTL0_MFD_MASK (0x3ff << 16)
+#define CCM_MPCTL0_MFI_OFFSET 10
+#define CCM_MPCTL0_MFI_MASK (0xf << 10)
+#define CCM_MPCTL0_MFN_OFFSET 0
+#define CCM_MPCTL0_MFN_MASK 0x3ff
+
+#define CCM_MPCTL1_LF (1 << 15)
+#define CCM_MPCTL1_BRMO (1 << 6)
+
+#define CCM_SPCTL0_CPLM (1 << 31)
+#define CCM_SPCTL0_PD_OFFSET 26
+#define CCM_SPCTL0_PD_MASK (0xf << 26)
+#define CCM_SPCTL0_MFD_OFFSET 16
+#define CCM_SPCTL0_MFD_MASK (0x3ff << 16)
+#define CCM_SPCTL0_MFI_OFFSET 10
+#define CCM_SPCTL0_MFI_MASK (0xf << 10)
+#define CCM_SPCTL0_MFN_OFFSET 0
+#define CCM_SPCTL0_MFN_MASK 0x3ff
+
+#define CCM_SPCTL1_LF (1 << 15)
+#define CCM_SPCTL1_BRMO (1 << 6)
+
+#define CCM_OSC26MCTL_PEAK_OFFSET 16
+#define CCM_OSC26MCTL_PEAK_MASK (0x3 << 16)
+#define CCM_OSC26MCTL_AGC_OFFSET 8
+#define CCM_OSC26MCTL_AGC_MASK (0x3f << 8)
+#define CCM_OSC26MCTL_ANATEST_OFFSET 0
+#define CCM_OSC26MCTL_ANATEST_MASK 0x3f
+
+#define CCM_PCDR0_SSI2BAUDDIV_OFFSET 26
+#define CCM_PCDR0_SSI2BAUDDIV_MASK (0x3f << 26)
+#define CCM_PCDR0_CLKO_EN 25
+#define CCM_PCDR0_CLKODIV_OFFSET 22
+#define CCM_PCDR0_CLKODIV_MASK (0x7 << 22)
+#define CCM_PCDR0_SSI1BAUDDIV_OFFSET 16
+#define CCM_PCDR0_SSI1BAUDDIV_MASK (0x3f << 16)
+/*The difinition for i.MX27 TO2*/
+#define CCM_PCDR0_VPUDIV2_OFFSET 10
+#define CCM_PCDR0_VPUDIV2_MASK (0x3f << 10)
+#define CCM_PCDR0_NFCDIV2_OFFSET 6
+#define CCM_PCDR0_NFCDIV2_MASK (0xf << 6)
+#define CCM_PCDR0_MSHCDIV2_MASK 0x3f
+/*The difinition for i.MX27 TO2*/
+#define CCM_PCDR0_NFCDIV_OFFSET 12
+#define CCM_PCDR0_NFCDIV_MASK (0xf << 12)
+#define CCM_PCDR0_VPUDIV_OFFSET 8
+#define CCM_PCDR0_VPUDIV_MASK (0xf << 8)
+#define CCM_PCDR0_MSHCDIV_OFFSET 0
+#define CCM_PCDR0_MSHCDIV_MASK 0x1f
+
+#define CCM_PCDR1_PERDIV4_OFFSET 24
+#define CCM_PCDR1_PERDIV4_MASK (0x3f << 24)
+#define CCM_PCDR1_PERDIV3_OFFSET 16
+#define CCM_PCDR1_PERDIV3_MASK (0x3f << 16)
+#define CCM_PCDR1_PERDIV2_OFFSET 8
+#define CCM_PCDR1_PERDIV2_MASK (0x3f << 8)
+#define CCM_PCDR1_PERDIV1_OFFSET 0
+#define CCM_PCDR1_PERDIV1_MASK 0x3f
+
+#define CCM_PCCR0_CSPI1_OFFSET 31
+#define CCM_PCCR0_CSPI1_MASK (1 << 31)
+#define CCM_PCCR0_CSPI2_OFFSET 30
+#define CCM_PCCR0_CSPI2_MASK (1 << 30)
+#define CCM_PCCR0_CSPI3_OFFSET 29
+#define CCM_PCCR0_CSPI3_MASK (1 << 29)
+#define CCM_PCCR0_DMA_OFFSET 28
+#define CCM_PCCR0_DMA_MASK (1 << 28)
+#define CCM_PCCR0_EMMA_OFFSET 27
+#define CCM_PCCR0_EMMA_MASK (1 << 27)
+#define CCM_PCCR0_FEC_OFFSET 26
+#define CCM_PCCR0_FEC_MASK (1 << 26)
+#define CCM_PCCR0_GPIO_OFFSET 25
+#define CCM_PCCR0_GPIO_MASK (1 << 25)
+#define CCM_PCCR0_GPT1_OFFSET 24
+#define CCM_PCCR0_GPT1_MASK (1 << 24)
+#define CCM_PCCR0_GPT2_OFFSET 23
+#define CCM_PCCR0_GPT2_MASK (1 << 23)
+#define CCM_PCCR0_GPT3_OFFSET 22
+#define CCM_PCCR0_GPT3_MASK (1 << 22)
+#define CCM_PCCR0_GPT4_OFFSET 21
+#define CCM_PCCR0_GPT4_MASK (1 << 21)
+#define CCM_PCCR0_GPT5_OFFSET 20
+#define CCM_PCCR0_GPT5_MASK (1 << 20)
+#define CCM_PCCR0_GPT6_OFFSET 19
+#define CCM_PCCR0_GPT6_MASK (1 << 19)
+#define CCM_PCCR0_I2C1_OFFSET 18
+#define CCM_PCCR0_I2C1_MASK (1 << 18)
+#define CCM_PCCR0_I2C2_OFFSET 17
+#define CCM_PCCR0_I2C2_MASK (1 << 17)
+#define CCM_PCCR0_IIM_OFFSET 16
+#define CCM_PCCR0_IIM_MASK (1 << 16)
+#define CCM_PCCR0_KPP_OFFSET 15
+#define CCM_PCCR0_KPP_MASK (1 << 15)
+#define CCM_PCCR0_LCDC_OFFSET 14
+#define CCM_PCCR0_LCDC_MASK (1 << 14)
+#define CCM_PCCR0_MSHC_OFFSET 13
+#define CCM_PCCR0_MSHC_MASK (1 << 13)
+#define CCM_PCCR0_OWIRE_OFFSET 12
+#define CCM_PCCR0_OWIRE_MASK (1 << 12)
+#define CCM_PCCR0_PWM_OFFSET 11
+#define CCM_PCCR0_PWM_MASK (1 << 11)
+#define CCM_PCCR0_RTC_OFFSET 9
+#define CCM_PCCR0_RTC_MASK (1 << 9)
+#define CCM_PCCR0_RTIC_OFFSET 8
+#define CCM_PCCR0_RTIC_MASK (1 << 8)
+#define CCM_PCCR0_SAHARA_OFFSET 7
+#define CCM_PCCR0_SAHARA_MASK (1 << 7)
+#define CCM_PCCR0_SCC_OFFSET 6
+#define CCM_PCCR0_SCC_MASK (1 << 6)
+#define CCM_PCCR0_SDHC1_OFFSET 5
+#define CCM_PCCR0_SDHC1_MASK (1 << 5)
+#define CCM_PCCR0_SDHC2_OFFSET 4
+#define CCM_PCCR0_SDHC2_MASK (1 << 4)
+#define CCM_PCCR0_SDHC3_OFFSET 3
+#define CCM_PCCR0_SDHC3_MASK (1 << 3)
+#define CCM_PCCR0_SLCDC_OFFSET 2
+#define CCM_PCCR0_SLCDC_MASK (1 << 2)
+#define CCM_PCCR0_SSI1_IPG_OFFSET 1
+#define CCM_PCCR0_SSI1_IPG_MASK (1 << 1)
+#define CCM_PCCR0_SSI2_IPG_OFFSET 0
+#define CCM_PCCR0_SSI2_IPG_MASK (1 << 0)
+
+#define CCM_PCCR1_UART1_OFFSET 31
+#define CCM_PCCR1_UART1_MASK (1 << 31)
+#define CCM_PCCR1_UART2_OFFSET 30
+#define CCM_PCCR1_UART2_MASK (1 << 30)
+#define CCM_PCCR1_UART3_OFFSET 29
+#define CCM_PCCR1_UART3_MASK (1 << 29)
+#define CCM_PCCR1_UART4_OFFSET 28
+#define CCM_PCCR1_UART4_MASK (1 << 28)
+#define CCM_PCCR1_UART5_OFFSET 27
+#define CCM_PCCR1_UART5_MASK (1 << 27)
+#define CCM_PCCR1_UART6_OFFSET 26
+#define CCM_PCCR1_UART6_MASK (1 << 26)
+#define CCM_PCCR1_USBOTG_OFFSET 25
+#define CCM_PCCR1_USBOTG_MASK (1 << 25)
+#define CCM_PCCR1_WDT_OFFSET 24
+#define CCM_PCCR1_WDT_MASK (1 << 24)
+#define CCM_PCCR1_HCLK_ATA_OFFSET 23
+#define CCM_PCCR1_HCLK_ATA_MASK (1 << 23)
+#define CCM_PCCR1_HCLK_BROM_OFFSET 22
+#define CCM_PCCR1_HCLK_BROM_MASK (1 << 22)
+#define CCM_PCCR1_HCLK_CSI_OFFSET 21
+#define CCM_PCCR1_HCLK_CSI_MASK (1 << 21)
+#define CCM_PCCR1_HCLK_DMA_OFFSET 20
+#define CCM_PCCR1_HCLK_DMA_MASK (1 << 20)
+#define CCM_PCCR1_HCLK_EMI_OFFSET 19
+#define CCM_PCCR1_HCLK_EMI_MASK (1 << 19)
+#define CCM_PCCR1_HCLK_EMMA_OFFSET 18
+#define CCM_PCCR1_HCLK_EMMA_MASK (1 << 18)
+#define CCM_PCCR1_HCLK_FEC_OFFSET 17
+#define CCM_PCCR1_HCLK_FEC_MASK (1 << 17)
+#define CCM_PCCR1_HCLK_VPU_OFFSET 16
+#define CCM_PCCR1_HCLK_VPU_MASK (1 << 16)
+#define CCM_PCCR1_HCLK_LCDC_OFFSET 15
+#define CCM_PCCR1_HCLK_LCDC_MASK (1 << 15)
+#define CCM_PCCR1_HCLK_RTIC_OFFSET 14
+#define CCM_PCCR1_HCLK_RTIC_MASK (1 << 14)
+#define CCM_PCCR1_HCLK_SAHARA_OFFSET 13
+#define CCM_PCCR1_HCLK_SAHARA_MASK (1 << 13)
+#define CCM_PCCR1_HCLK_SLCDC_OFFSET 12
+#define CCM_PCCR1_HCLK_SLCDC_MASK (1 << 12)
+#define CCM_PCCR1_HCLK_USBOTG_OFFSET 11
+#define CCM_PCCR1_HCLK_USBOTG_MASK (1 << 11)
+#define CCM_PCCR1_PERCLK1_OFFSET 10
+#define CCM_PCCR1_PERCLK1_MASK (1 << 10)
+#define CCM_PCCR1_PERCLK2_OFFSET 9
+#define CCM_PCCR1_PERCLK2_MASK (1 << 9)
+#define CCM_PCCR1_PERCLK3_OFFSET 8
+#define CCM_PCCR1_PERCLK3_MASK (1 << 8)
+#define CCM_PCCR1_PERCLK4_OFFSET 7
+#define CCM_PCCR1_PERCLK4_MASK (1 << 7)
+#define CCM_PCCR1_VPU_BAUD_OFFSET 6
+#define CCM_PCCR1_VPU_BAUD_MASK (1 << 6)
+#define CCM_PCCR1_SSI1_BAUD_OFFSET 5
+#define CCM_PCCR1_SSI1_BAUD_MASK (1 << 5)
+#define CCM_PCCR1_SSI2_BAUD_OFFSET 4
+#define CCM_PCCR1_SSI2_BAUD_MASK (1 << 4)
+#define CCM_PCCR1_NFC_BAUD_OFFSET 3
+#define CCM_PCCR1_NFC_BAUD_MASK (1 << 3)
+#define CCM_PCCR1_MSHC_BAUD_OFFSET 2
+#define CCM_PCCR1_MSHC_BAUD_MASK (1 << 2)
+
+#define CCM_CCSR_32KSR (1 << 15)
+#define CCM_CCSR_CLKMODE1 (1 << 9)
+#define CCM_CCSR_CLKMODE0 (1 << 8)
+#define CCM_CCSR_CLKOSEL_OFFSET 0
+#define CCM_CCSR_CLKOSEL_MASK 0x1f
+
+#define SYS_FMCR 0x14 /* Functional Muxing Control Reg */
+#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */
+
+#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
new file mode 100644
index 000000000000..a1f44c3c5315
--- /dev/null
+++ b/arch/arm/mach-mx2/devices.c
@@ -0,0 +1,231 @@
+/*
+ * Author: MontaVista Software, Inc.
+ * <source@mvista.com>
+ *
+ * Based on the OMAP devices.c
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/hardware.h>
+
+/*
+ * Resource definition for the MXC IrDA
+ */
+static struct resource mxc_irda_resources[] = {
+ [0] = {
+ .start = UART3_BASE_ADDR,
+ .end = UART3_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MXC_INT_UART3,
+ .end = MXC_INT_UART3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/* Platform Data for MXC IrDA */
+struct platform_device mxc_irda_device = {
+ .name = "mxc_irda",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_irda_resources),
+ .resource = mxc_irda_resources,
+};
+
+/*
+ * General Purpose Timer
+ * - i.MX1: 2 timer (slighly different register handling)
+ * - i.MX21: 3 timer
+ * - i.MX27: 6 timer
+ */
+
+/* We use gpt0 as system timer, so do not add a device for this one */
+
+static struct resource timer1_resources[] = {
+ [0] = {
+ .start = GPT2_BASE_ADDR,
+ .end = GPT2_BASE_ADDR + 0x17,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = MXC_INT_GPT2,
+ .end = MXC_INT_GPT2,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_gpt1 = {
+ .name = "imx_gpt",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(timer1_resources),
+ .resource = timer1_resources
+};
+
+static struct resource timer2_resources[] = {
+ [0] = {
+ .start = GPT3_BASE_ADDR,
+ .end = GPT3_BASE_ADDR + 0x17,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = MXC_INT_GPT3,
+ .end = MXC_INT_GPT3,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_gpt2 = {
+ .name = "imx_gpt",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(timer2_resources),
+ .resource = timer2_resources
+};
+
+#ifdef CONFIG_MACH_MX27
+static struct resource timer3_resources[] = {
+ [0] = {
+ .start = GPT4_BASE_ADDR,
+ .end = GPT4_BASE_ADDR + 0x17,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = MXC_INT_GPT4,
+ .end = MXC_INT_GPT4,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_gpt3 = {
+ .name = "imx_gpt",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(timer3_resources),
+ .resource = timer3_resources
+};
+
+static struct resource timer4_resources[] = {
+ [0] = {
+ .start = GPT5_BASE_ADDR,
+ .end = GPT5_BASE_ADDR + 0x17,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = MXC_INT_GPT5,
+ .end = MXC_INT_GPT5,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_gpt4 = {
+ .name = "imx_gpt",
+ .id = 4,
+ .num_resources = ARRAY_SIZE(timer4_resources),
+ .resource = timer4_resources
+};
+
+static struct resource timer5_resources[] = {
+ [0] = {
+ .start = GPT6_BASE_ADDR,
+ .end = GPT6_BASE_ADDR + 0x17,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = MXC_INT_GPT6,
+ .end = MXC_INT_GPT6,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_gpt5 = {
+ .name = "imx_gpt",
+ .id = 5,
+ .num_resources = ARRAY_SIZE(timer5_resources),
+ .resource = timer5_resources
+};
+#endif
+
+/*
+ * Watchdog:
+ * - i.MX1
+ * - i.MX21
+ * - i.MX27
+ */
+static struct resource mxc_wdt_resources[] = {
+ {
+ .start = WDOG_BASE_ADDR,
+ .end = WDOG_BASE_ADDR + 0x30,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device mxc_wdt = {
+ .name = "mxc_wdt",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_wdt_resources),
+ .resource = mxc_wdt_resources,
+};
+
+/* GPIO port description */
+static struct mxc_gpio_port imx_gpio_ports[] = {
+ [0] = {
+ .chip.label = "gpio-0",
+ .irq = MXC_INT_GPIO,
+ .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 0),
+ .virtual_irq_start = MXC_MAX_INT_LINES,
+ },
+ [1] = {
+ .chip.label = "gpio-1",
+ .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 1),
+ .virtual_irq_start = MXC_MAX_INT_LINES + 32,
+ },
+ [2] = {
+ .chip.label = "gpio-2",
+ .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 2),
+ .virtual_irq_start = MXC_MAX_INT_LINES + 64,
+ },
+ [3] = {
+ .chip.label = "gpio-3",
+ .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 3),
+ .virtual_irq_start = MXC_MAX_INT_LINES + 96,
+ },
+ [4] = {
+ .chip.label = "gpio-4",
+ .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 4),
+ .virtual_irq_start = MXC_MAX_INT_LINES + 128,
+ },
+ [5] = {
+ .chip.label = "gpio-5",
+ .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 5),
+ .virtual_irq_start = MXC_MAX_INT_LINES + 160,
+ }
+};
+
+int __init mxc_register_gpios(void)
+{
+ return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+}
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
new file mode 100644
index 000000000000..07875cf00de9
--- /dev/null
+++ b/arch/arm/mach-mx2/generic.c
@@ -0,0 +1,74 @@
+/*
+ * generic.c
+ *
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <asm/hardware.h>
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+/* MX27 memory map definition */
+static struct map_desc mxc_io_desc[] __initdata = {
+ /*
+ * this fixed mapping covers:
+ * - AIPI1
+ * - AIPI2
+ * - AITC
+ * - ROM Patch
+ * - and some reserved space
+ */
+ {
+ .virtual = AIPI_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(AIPI_BASE_ADDR),
+ .length = AIPI_SIZE,
+ .type = MT_DEVICE
+ },
+ /*
+ * this fixed mapping covers:
+ * - CSI
+ * - ATA
+ */
+ {
+ .virtual = SAHB1_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(SAHB1_BASE_ADDR),
+ .length = SAHB1_SIZE,
+ .type = MT_DEVICE
+ },
+ /*
+ * this fixed mapping covers:
+ * - EMI
+ */
+ {
+ .virtual = X_MEMC_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(X_MEMC_BASE_ADDR),
+ .length = X_MEMC_SIZE,
+ .type = MT_DEVICE
+ }
+};
+
+/*
+ * Initialize the memory map. It is called during the
+ * system startup to create static physical to virtual
+ * memory map for the IO modules.
+ */
+void __init mxc_map_io(void)
+{
+ iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
new file mode 100644
index 000000000000..a9ff01fff137
--- /dev/null
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -0,0 +1,304 @@
+/*
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <asm/arch/common.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/imx-uart.h>
+#include <asm/arch/iomux-mx1-mx2.h>
+#include <asm/arch/board-mx27ads.h>
+
+/* ADS's NOR flash */
+static struct physmap_flash_data mx27ads_flash_data = {
+ .width = 2,
+};
+
+static struct resource mx27ads_flash_resource = {
+ .start = 0xc0000000,
+ .end = 0xc0000000 + 0x02000000 - 1,
+ .flags = IORESOURCE_MEM,
+
+};
+
+static struct platform_device mx27ads_nor_mtd_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &mx27ads_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &mx27ads_flash_resource,
+};
+
+static int mxc_uart0_pins[] = {
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS
+};
+
+static int uart_mxc_port0_init(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
+ ARRAY_SIZE(mxc_uart0_pins),
+ MXC_GPIO_ALLOC_MODE_NORMAL, "UART0");
+}
+
+static int uart_mxc_port0_exit(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
+ ARRAY_SIZE(mxc_uart0_pins),
+ MXC_GPIO_ALLOC_MODE_RELEASE, "UART0");
+}
+
+static int mxc_uart1_pins[] = {
+ PE3_PF_UART2_CTS,
+ PE4_PF_UART2_RTS,
+ PE6_PF_UART2_TXD,
+ PE7_PF_UART2_RXD
+};
+
+static int uart_mxc_port1_init(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+ ARRAY_SIZE(mxc_uart1_pins),
+ MXC_GPIO_ALLOC_MODE_NORMAL, "UART1");
+}
+
+static int uart_mxc_port1_exit(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+ ARRAY_SIZE(mxc_uart1_pins),
+ MXC_GPIO_ALLOC_MODE_RELEASE, "UART1");
+}
+
+static int mxc_uart2_pins[] = {
+ PE8_PF_UART3_TXD,
+ PE9_PF_UART3_RXD,
+ PE10_PF_UART3_CTS,
+ PE11_PF_UART3_RTS
+};
+
+static int uart_mxc_port2_init(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
+ ARRAY_SIZE(mxc_uart2_pins),
+ MXC_GPIO_ALLOC_MODE_NORMAL, "UART2");
+}
+
+static int uart_mxc_port2_exit(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
+ ARRAY_SIZE(mxc_uart2_pins),
+ MXC_GPIO_ALLOC_MODE_RELEASE, "UART2");
+}
+
+static int mxc_uart3_pins[] = {
+ PB26_AF_UART4_RTS,
+ PB28_AF_UART4_TXD,
+ PB29_AF_UART4_CTS,
+ PB31_AF_UART4_RXD
+};
+
+static int uart_mxc_port3_init(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_uart3_pins,
+ ARRAY_SIZE(mxc_uart3_pins),
+ MXC_GPIO_ALLOC_MODE_NORMAL, "UART3");
+}
+
+static int uart_mxc_port3_exit(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_uart3_pins,
+ ARRAY_SIZE(mxc_uart3_pins),
+ MXC_GPIO_ALLOC_MODE_RELEASE, "UART3");
+}
+
+static int mxc_uart4_pins[] = {
+ PB18_AF_UART5_TXD,
+ PB19_AF_UART5_RXD,
+ PB20_AF_UART5_CTS,
+ PB21_AF_UART5_RTS
+};
+
+static int uart_mxc_port4_init(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_uart4_pins,
+ ARRAY_SIZE(mxc_uart4_pins),
+ MXC_GPIO_ALLOC_MODE_NORMAL, "UART4");
+}
+
+static int uart_mxc_port4_exit(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_uart4_pins,
+ ARRAY_SIZE(mxc_uart4_pins),
+ MXC_GPIO_ALLOC_MODE_RELEASE, "UART4");
+}
+
+static int mxc_uart5_pins[] = {
+ PB10_AF_UART6_TXD,
+ PB12_AF_UART6_CTS,
+ PB11_AF_UART6_RXD,
+ PB13_AF_UART6_RTS
+};
+
+static int uart_mxc_port5_init(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_uart5_pins,
+ ARRAY_SIZE(mxc_uart5_pins),
+ MXC_GPIO_ALLOC_MODE_NORMAL, "UART5");
+}
+
+static int uart_mxc_port5_exit(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_uart5_pins,
+ ARRAY_SIZE(mxc_uart5_pins),
+ MXC_GPIO_ALLOC_MODE_RELEASE, "UART5");
+}
+
+static struct platform_device *platform_devices[] __initdata = {
+ &mx27ads_nor_mtd_device,
+};
+
+static int mxc_fec_pins[] = {
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_CLR,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN
+};
+
+static void gpio_fec_active(void)
+{
+ mxc_gpio_setup_multiple_pins(mxc_fec_pins,
+ ARRAY_SIZE(mxc_fec_pins),
+ MXC_GPIO_ALLOC_MODE_NORMAL, "FEC");
+}
+
+static void gpio_fec_inactive(void)
+{
+ mxc_gpio_setup_multiple_pins(mxc_fec_pins,
+ ARRAY_SIZE(mxc_fec_pins),
+ MXC_GPIO_ALLOC_MODE_RELEASE, "FEC");
+}
+
+static struct imxuart_platform_data uart_pdata[] = {
+ {
+ .init = uart_mxc_port0_init,
+ .exit = uart_mxc_port0_exit,
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .init = uart_mxc_port1_init,
+ .exit = uart_mxc_port1_exit,
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .init = uart_mxc_port2_init,
+ .exit = uart_mxc_port2_exit,
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .init = uart_mxc_port3_init,
+ .exit = uart_mxc_port3_exit,
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .init = uart_mxc_port4_init,
+ .exit = uart_mxc_port4_exit,
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .init = uart_mxc_port5_init,
+ .exit = uart_mxc_port5_exit,
+ .flags = IMXUART_HAVE_RTSCTS,
+ },
+};
+
+static void __init mx27ads_board_init(void)
+{
+ int i;
+
+ gpio_fec_active();
+
+ for (i = 0; i < 6; i++)
+ imx_init_uart(i, &uart_pdata[i]);
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27ads_timer_init(void)
+{
+ unsigned long fref = 26000000;
+
+ if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
+ fref = 27000000;
+
+ mxc_clocks_init(fref);
+ mxc_timer_init("gpt_clk.0");
+}
+
+struct sys_timer mx27ads_timer = {
+ .init = mx27ads_timer_init,
+};
+
+static struct map_desc mx27ads_io_desc[] __initdata = {
+ {
+ .virtual = PBC_BASE_ADDRESS,
+ .pfn = __phys_to_pfn(CS4_BASE_ADDR),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init mx27ads_map_io(void)
+{
+ mxc_map_io();
+ iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
+}
+
+MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
+ /* maintainer: Freescale Semiconductor, Inc. */
+ .phys_io = AIPI_BASE_ADDR,
+ .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx27ads_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mx27ads_board_init,
+ .timer = &mx27ads_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
new file mode 100644
index 000000000000..a9a28f58e714
--- /dev/null
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/arch/common.h>
+#include <asm/hardware.h>
+#include <asm/arch/iomux-mx1-mx2.h>
+#include <asm/mach/time.h>
+#include <asm/arch/imx-uart.h>
+#include <asm/arch/board-pcm038.h>
+
+/*
+ * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
+ * 16 bit width
+ */
+static struct physmap_flash_data pcm038_flash_data = {
+ .width = 2,
+};
+
+static struct resource pcm038_flash_resource = {
+ .start = 0xc0000000,
+ .end = 0xc1ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm038_nor_mtd_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &pcm038_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &pcm038_flash_resource,
+};
+
+static int mxc_uart0_pins[] = {
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS
+};
+
+static int uart_mxc_port0_init(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
+ ARRAY_SIZE(mxc_uart0_pins),
+ MXC_GPIO_ALLOC_MODE_NORMAL, "UART0");
+}
+
+static int uart_mxc_port0_exit(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
+ ARRAY_SIZE(mxc_uart0_pins),
+ MXC_GPIO_ALLOC_MODE_RELEASE, "UART0");
+}
+
+static int mxc_uart1_pins[] = {
+ PE3_PF_UART2_CTS,
+ PE4_PF_UART2_RTS,
+ PE6_PF_UART2_TXD,
+ PE7_PF_UART2_RXD
+};
+
+static int uart_mxc_port1_init(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+ ARRAY_SIZE(mxc_uart1_pins),
+ MXC_GPIO_ALLOC_MODE_NORMAL, "UART1");
+}
+
+static int uart_mxc_port1_exit(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+ ARRAY_SIZE(mxc_uart1_pins),
+ MXC_GPIO_ALLOC_MODE_RELEASE, "UART1");
+}
+
+static int mxc_uart2_pins[] = { PE10_PF_UART3_CTS,
+ PE9_PF_UART3_RXD,
+ PE10_PF_UART3_CTS,
+ PE9_PF_UART3_RXD };
+
+static int uart_mxc_port2_init(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
+ ARRAY_SIZE(mxc_uart2_pins),
+ MXC_GPIO_ALLOC_MODE_NORMAL, "UART2");
+}
+
+static int uart_mxc_port2_exit(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
+ ARRAY_SIZE(mxc_uart2_pins),
+ MXC_GPIO_ALLOC_MODE_RELEASE, "UART2");
+}
+
+static struct imxuart_platform_data uart_pdata[] = {
+ {
+ .init = uart_mxc_port0_init,
+ .exit = uart_mxc_port0_exit,
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .init = uart_mxc_port1_init,
+ .exit = uart_mxc_port1_exit,
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .init = uart_mxc_port2_init,
+ .exit = uart_mxc_port2_exit,
+ .flags = IMXUART_HAVE_RTSCTS,
+ },
+};
+
+static int mxc_fec_pins[] = {
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_CLR,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN
+};
+
+static void gpio_fec_active(void)
+{
+ mxc_gpio_setup_multiple_pins(mxc_fec_pins,
+ ARRAY_SIZE(mxc_fec_pins),
+ MXC_GPIO_ALLOC_MODE_NORMAL, "FEC");
+}
+
+static void gpio_fec_inactive(void)
+{
+ mxc_gpio_setup_multiple_pins(mxc_fec_pins,
+ ARRAY_SIZE(mxc_fec_pins),
+ MXC_GPIO_ALLOC_MODE_RELEASE, "FEC");
+}
+
+static struct platform_device *platform_devices[] __initdata = {
+ &pcm038_nor_mtd_device,
+};
+
+static void __init pcm038_init(void)
+{
+ int i;
+ gpio_fec_active();
+
+ for (i = 0; i < 3; i++)
+ imx_init_uart(i, &uart_pdata[i]);
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+#ifdef CONFIG_MACH_PCM970_BASEBOARD
+ pcm970_baseboard_init();
+#endif
+}
+
+static void __init pcm038_timer_init(void)
+{
+ mxc_clocks_init(26000000);
+ mxc_timer_init("gpt_clk.0");
+}
+
+struct sys_timer pcm038_timer = {
+ .init = pcm038_timer_init,
+};
+
+MACHINE_START(PCM038, "phyCORE-i.MX27")
+ .phys_io = AIPI_BASE_ADDR,
+ .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mxc_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = pcm038_init,
+ .timer = &pcm038_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
new file mode 100644
index 000000000000..028ac4d33684
--- /dev/null
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+/*
+ * system init for baseboard usage. Will be called by pcm038 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init pcm970_baseboard_init(void)
+{
+}
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
new file mode 100644
index 000000000000..570c02b8e5df
--- /dev/null
+++ b/arch/arm/mach-mx2/serial.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <asm/hardware.h>
+#include <asm/arch/imx-uart.h>
+
+static struct resource uart0[] = {
+ {
+ .start = UART1_BASE_ADDR,
+ .end = UART1_BASE_ADDR + 0x0B5,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_UART1,
+ .end = MXC_INT_UART1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mxc_uart_device0 = {
+ .name = "imx-uart",
+ .id = 0,
+ .resource = uart0,
+ .num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+ {
+ .start = UART2_BASE_ADDR,
+ .end = UART2_BASE_ADDR + 0x0B5,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_UART2,
+ .end = MXC_INT_UART2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mxc_uart_device1 = {
+ .name = "imx-uart",
+ .id = 1,
+ .resource = uart1,
+ .num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+ {
+ .start = UART3_BASE_ADDR,
+ .end = UART3_BASE_ADDR + 0x0B5,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_UART3,
+ .end = MXC_INT_UART3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mxc_uart_device2 = {
+ .name = "imx-uart",
+ .id = 2,
+ .resource = uart2,
+ .num_resources = ARRAY_SIZE(uart2),
+};
+
+static struct resource uart3[] = {
+ {
+ .start = UART4_BASE_ADDR,
+ .end = UART4_BASE_ADDR + 0x0B5,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_UART4,
+ .end = MXC_INT_UART4,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mxc_uart_device3 = {
+ .name = "imx-uart",
+ .id = 3,
+ .resource = uart3,
+ .num_resources = ARRAY_SIZE(uart3),
+};
+
+static struct resource uart4[] = {
+ {
+ .start = UART5_BASE_ADDR,
+ .end = UART5_BASE_ADDR + 0x0B5,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_UART5,
+ .end = MXC_INT_UART5,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mxc_uart_device4 = {
+ .name = "imx-uart",
+ .id = 4,
+ .resource = uart4,
+ .num_resources = ARRAY_SIZE(uart4),
+};
+
+static struct resource uart5[] = {
+ {
+ .start = UART6_BASE_ADDR,
+ .end = UART6_BASE_ADDR + 0x0B5,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_UART6,
+ .end = MXC_INT_UART6,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mxc_uart_device5 = {
+ .name = "imx-uart",
+ .id = 5,
+ .resource = uart5,
+ .num_resources = ARRAY_SIZE(uart5),
+};
+
+/*
+ * Register only those UARTs that physically exists
+ */
+int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata)
+{
+ switch (uart_no) {
+ case 0:
+ mxc_uart_device0.dev.platform_data = pdata;
+ platform_device_register(&mxc_uart_device0);
+ break;
+ case 1:
+ mxc_uart_device1.dev.platform_data = pdata;
+ platform_device_register(&mxc_uart_device1);
+ break;
+#ifndef CONFIG_MXC_IRDA
+ case 2:
+ mxc_uart_device2.dev.platform_data = pdata;
+ platform_device_register(&mxc_uart_device2);
+ break;
+#endif
+ case 3:
+ mxc_uart_device3.dev.platform_data = pdata;
+ platform_device_register(&mxc_uart_device3);
+ break;
+ case 4:
+ mxc_uart_device4.dev.platform_data = pdata;
+ platform_device_register(&mxc_uart_device4);
+ break;
+ case 5:
+ mxc_uart_device5.dev.platform_data = pdata;
+ platform_device_register(&mxc_uart_device5);
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ return 0;
+}
diff --git a/arch/arm/mach-mx2/system.c b/arch/arm/mach-mx2/system.c
new file mode 100644
index 000000000000..99304645299d
--- /dev/null
+++ b/arch/arm/mach-mx2/system.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/proc-fns.h>
+#include <asm/system.h>
+
+/*
+ * Put the CPU into idle mode. It is called by default_idle()
+ * in process.c file.
+ */
+void arch_idle(void)
+{
+ /*
+ * This should do all the clock switching
+ * and wait for interrupt tricks.
+ */
+ cpu_do_idle();
+}
+
+#define WDOG_WCR_REG IO_ADDRESS(WDOG_BASE_ADDR)
+#define WDOG_WCR_SRS (1 << 4)
+
+/*
+ * Reset the system. It is called by machine_restart().
+ */
+void arch_reset(char mode)
+{
+ struct clk *clk;
+
+ clk = clk_get(NULL, "wdog_clk");
+ if (!clk) {
+ printk(KERN_ERR"Cannot activate the watchdog. Giving up\n");
+ return;
+ }
+
+ clk_enable(clk);
+
+ /* Assert SRS signal */
+ __raw_writew(__raw_readw(WDOG_WCR_REG) & ~WDOG_WCR_SRS, WDOG_WCR_REG);
+}
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 5fe8606cac08..db9431dee1b4 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -8,5 +8,18 @@ config MACH_MX31ADS
Include support for MX31ADS platform. This includes specific
configurations for the board and its peripherals.
+config MACH_PCM037
+ bool "Support Phytec pcm037 platforms"
+ help
+ Include support for Phytec pcm037 platform. This includes
+ specific configurations for the board and its peripherals.
+
+config MACH_MX31LITE
+ bool "Support MX31 LITEKIT (LogicPD)"
+ default n
+ help
+ Include support for MX31 LITEKIT platform. This includes specific
+ configurations for the board and its peripherals.
+
endmenu
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index cbec997f332a..8b21abb71fb0 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -4,5 +4,7 @@
# Object file lists.
-obj-y := mm.o time.o
+obj-y := mm.o clock.o devices.o iomux.o
obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o
+obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o
+obj-$(CONFIG_MACH_PCM037) += pcm037.o
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
new file mode 100644
index 000000000000..2f3635943e70
--- /dev/null
+++ b/arch/arm/mach-mx3/clock.c
@@ -0,0 +1,1147 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <asm/arch/clock.h>
+#include <asm/div64.h>
+
+#include "crm_regs.h"
+
+#define PRE_DIV_MIN_FREQ 10000000 /* Minimum Frequency after Predivider */
+
+static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post)
+{
+ u32 min_pre, temp_pre, old_err, err;
+
+ if (div >= 512) {
+ *pre = 8;
+ *post = 64;
+ } else if (div >= 64) {
+ min_pre = (div - 1) / 64 + 1;
+ old_err = 8;
+ for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
+ err = div % temp_pre;
+ if (err == 0) {
+ *pre = temp_pre;
+ break;
+ }
+ err = temp_pre - err;
+ if (err < old_err) {
+ old_err = err;
+ *pre = temp_pre;
+ }
+ }
+ *post = (div + *pre - 1) / *pre;
+ } else if (div <= 8) {
+ *pre = div;
+ *post = 1;
+ } else {
+ *pre = 1;
+ *post = div;
+ }
+}
+
+static struct clk mcu_pll_clk;
+static struct clk mcu_main_clk;
+static struct clk usb_pll_clk;
+static struct clk serial_pll_clk;
+static struct clk ipg_clk;
+static struct clk ckih_clk;
+static struct clk ahb_clk;
+
+static int _clk_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg |= 3 << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+
+ return 0;
+}
+
+static void _clk_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(3 << clk->enable_shift);
+ __raw_writel(reg, clk->enable_reg);
+}
+
+static void _clk_emi_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(3 << clk->enable_shift);
+ reg |= (1 << clk->enable_shift);
+ __raw_writel(reg, clk->enable_reg);
+}
+
+static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg;
+ signed long pd = 1; /* Pre-divider */
+ signed long mfi; /* Multiplication Factor (Integer part) */
+ signed long mfn; /* Multiplication Factor (Integer part) */
+ signed long mfd; /* Multiplication Factor (Denominator Part) */
+ signed long tmp;
+ u32 ref_freq = clk_get_rate(clk->parent);
+
+ while (((ref_freq / pd) * 10) > rate)
+ pd++;
+
+ if ((ref_freq / pd) < PRE_DIV_MIN_FREQ)
+ return -EINVAL;
+
+ /* the ref_freq/2 in the following is to round up */
+ mfi = (((rate / 2) * pd) + (ref_freq / 2)) / ref_freq;
+ if (mfi < 5 || mfi > 15)
+ return -EINVAL;
+
+ /* pick a mfd value that will work
+ * then solve for mfn */
+ mfd = ref_freq / 50000;
+
+ /*
+ * pll_freq * pd * mfd
+ * mfn = -------------------- - (mfi * mfd)
+ * 2 * ref_freq
+ */
+ /* the tmp/2 is for rounding */
+ tmp = ref_freq / 10000;
+ mfn =
+ ((((((rate / 2) + (tmp / 2)) / tmp) * pd) * mfd) / 10000) -
+ (mfi * mfd);
+
+ mfn = mfn & 0x3ff;
+ pd--;
+ mfd--;
+
+ /* Change the Pll value */
+ reg = (mfi << MXC_CCM_PCTL_MFI_OFFSET) |
+ (mfn << MXC_CCM_PCTL_MFN_OFFSET) |
+ (mfd << MXC_CCM_PCTL_MFD_OFFSET) | (pd << MXC_CCM_PCTL_PD_OFFSET);
+
+ if (clk == &mcu_pll_clk)
+ __raw_writel(reg, MXC_CCM_MPCTL);
+ else if (clk == &usb_pll_clk)
+ __raw_writel(reg, MXC_CCM_UPCTL);
+ else if (clk == &serial_pll_clk)
+ __raw_writel(reg, MXC_CCM_SRPCTL);
+
+ return 0;
+}
+
+static unsigned long _clk_pll_get_rate(struct clk *clk)
+{
+ long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
+ unsigned long reg, ccmr;
+ s64 temp;
+ unsigned int prcs;
+
+ ccmr = __raw_readl(MXC_CCM_CCMR);
+ prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
+ if (prcs == 0x1)
+ ref_clk = CKIL_CLK_FREQ * 1024;
+ else
+ ref_clk = clk_get_rate(&ckih_clk);
+
+ if (clk == &mcu_pll_clk) {
+ if ((ccmr & MXC_CCM_CCMR_MPE) == 0)
+ return ref_clk;
+ if ((ccmr & MXC_CCM_CCMR_MDS) != 0)
+ return ref_clk;
+ reg = __raw_readl(MXC_CCM_MPCTL);
+ } else if (clk == &usb_pll_clk)
+ reg = __raw_readl(MXC_CCM_UPCTL);
+ else if (clk == &serial_pll_clk)
+ reg = __raw_readl(MXC_CCM_SRPCTL);
+ else {
+ BUG();
+ return 0;
+ }
+
+ pdf = (reg & MXC_CCM_PCTL_PD_MASK) >> MXC_CCM_PCTL_PD_OFFSET;
+ mfd = (reg & MXC_CCM_PCTL_MFD_MASK) >> MXC_CCM_PCTL_MFD_OFFSET;
+ mfi = (reg & MXC_CCM_PCTL_MFI_MASK) >> MXC_CCM_PCTL_MFI_OFFSET;
+ mfi = (mfi <= 5) ? 5 : mfi;
+ mfn = mfn_abs = reg & MXC_CCM_PCTL_MFN_MASK;
+
+ if (mfn >= 0x200) {
+ mfn |= 0xFFFFFE00;
+ mfn_abs = -mfn;
+ }
+
+ ref_clk *= 2;
+ ref_clk /= pdf + 1;
+
+ temp = (u64) ref_clk * mfn_abs;
+ do_div(temp, mfd + 1);
+ if (mfn < 0)
+ temp = -temp;
+ temp = (ref_clk * mfi) + temp;
+
+ return temp;
+}
+
+static int _clk_usb_pll_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_CCMR);
+ reg |= MXC_CCM_CCMR_UPE;
+ __raw_writel(reg, MXC_CCM_CCMR);
+
+ /* No lock bit on MX31, so using max time from spec */
+ udelay(80);
+
+ return 0;
+}
+
+static void _clk_usb_pll_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_CCMR);
+ reg &= ~MXC_CCM_CCMR_UPE;
+ __raw_writel(reg, MXC_CCM_CCMR);
+}
+
+static int _clk_serial_pll_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_CCMR);
+ reg |= MXC_CCM_CCMR_SPE;
+ __raw_writel(reg, MXC_CCM_CCMR);
+
+ /* No lock bit on MX31, so using max time from spec */
+ udelay(80);
+
+ return 0;
+}
+
+static void _clk_serial_pll_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_CCMR);
+ reg &= ~MXC_CCM_CCMR_SPE;
+ __raw_writel(reg, MXC_CCM_CCMR);
+}
+
+#define PDR0(mask, off) ((__raw_readl(MXC_CCM_PDR0) & mask) >> off)
+#define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off)
+#define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off)
+
+static unsigned long _clk_mcu_main_get_rate(struct clk *clk)
+{
+ u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0);
+
+ if ((pmcr0 & MXC_CCM_PMCR0_DFSUP1) == MXC_CCM_PMCR0_DFSUP1_SPLL)
+ return clk_get_rate(&serial_pll_clk);
+ else
+ return clk_get_rate(&mcu_pll_clk);
+}
+
+static unsigned long _clk_hclk_get_rate(struct clk *clk)
+{
+ unsigned long max_pdf;
+
+ max_pdf = PDR0(MXC_CCM_PDR0_MAX_PODF_MASK,
+ MXC_CCM_PDR0_MAX_PODF_OFFSET);
+ return clk_get_rate(clk->parent) / (max_pdf + 1);
+}
+
+static unsigned long _clk_ipg_get_rate(struct clk *clk)
+{
+ unsigned long ipg_pdf;
+
+ ipg_pdf = PDR0(MXC_CCM_PDR0_IPG_PODF_MASK,
+ MXC_CCM_PDR0_IPG_PODF_OFFSET);
+ return clk_get_rate(clk->parent) / (ipg_pdf + 1);
+}
+
+static unsigned long _clk_nfc_get_rate(struct clk *clk)
+{
+ unsigned long nfc_pdf;
+
+ nfc_pdf = PDR0(MXC_CCM_PDR0_NFC_PODF_MASK,
+ MXC_CCM_PDR0_NFC_PODF_OFFSET);
+ return clk_get_rate(clk->parent) / (nfc_pdf + 1);
+}
+
+static unsigned long _clk_hsp_get_rate(struct clk *clk)
+{
+ unsigned long hsp_pdf;
+
+ hsp_pdf = PDR0(MXC_CCM_PDR0_HSP_PODF_MASK,
+ MXC_CCM_PDR0_HSP_PODF_OFFSET);
+ return clk_get_rate(clk->parent) / (hsp_pdf + 1);
+}
+
+static unsigned long _clk_usb_get_rate(struct clk *clk)
+{
+ unsigned long usb_pdf, usb_prepdf;
+
+ usb_pdf = PDR1(MXC_CCM_PDR1_USB_PODF_MASK,
+ MXC_CCM_PDR1_USB_PODF_OFFSET);
+ usb_prepdf = PDR1(MXC_CCM_PDR1_USB_PRDF_MASK,
+ MXC_CCM_PDR1_USB_PRDF_OFFSET);
+ return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1);
+}
+
+static unsigned long _clk_csi_get_rate(struct clk *clk)
+{
+ u32 reg, pre, post;
+
+ reg = __raw_readl(MXC_CCM_PDR0);
+ pre = (reg & MXC_CCM_PDR0_CSI_PRDF_MASK) >>
+ MXC_CCM_PDR0_CSI_PRDF_OFFSET;
+ pre++;
+ post = (reg & MXC_CCM_PDR0_CSI_PODF_MASK) >>
+ MXC_CCM_PDR0_CSI_PODF_OFFSET;
+ post++;
+ return clk_get_rate(clk->parent) / (pre * post);
+}
+
+static unsigned long _clk_csi_round_rate(struct clk *clk, unsigned long rate)
+{
+ u32 pre, post, parent = clk_get_rate(clk->parent);
+ u32 div = parent / rate;
+
+ if (parent % rate)
+ div++;
+
+ __calc_pre_post_dividers(div, &pre, &post);
+
+ return parent / (pre * post);
+}
+
+static int _clk_csi_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
+
+ div = parent / rate;
+
+ if ((parent / div) != rate)
+ return -EINVAL;
+
+ __calc_pre_post_dividers(div, &pre, &post);
+
+ /* Set CSI clock divider */
+ reg = __raw_readl(MXC_CCM_PDR0) &
+ ~(MXC_CCM_PDR0_CSI_PODF_MASK | MXC_CCM_PDR0_CSI_PRDF_MASK);
+ reg |= (post - 1) << MXC_CCM_PDR0_CSI_PODF_OFFSET;
+ reg |= (pre - 1) << MXC_CCM_PDR0_CSI_PRDF_OFFSET;
+ __raw_writel(reg, MXC_CCM_PDR0);
+
+ return 0;
+}
+
+static unsigned long _clk_per_get_rate(struct clk *clk)
+{
+ unsigned long per_pdf;
+
+ per_pdf = PDR0(MXC_CCM_PDR0_PER_PODF_MASK,
+ MXC_CCM_PDR0_PER_PODF_OFFSET);
+ return clk_get_rate(clk->parent) / (per_pdf + 1);
+}
+
+static unsigned long _clk_ssi1_get_rate(struct clk *clk)
+{
+ unsigned long ssi1_pdf, ssi1_prepdf;
+
+ ssi1_pdf = PDR1(MXC_CCM_PDR1_SSI1_PODF_MASK,
+ MXC_CCM_PDR1_SSI1_PODF_OFFSET);
+ ssi1_prepdf = PDR1(MXC_CCM_PDR1_SSI1_PRE_PODF_MASK,
+ MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET);
+ return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1);
+}
+
+static unsigned long _clk_ssi2_get_rate(struct clk *clk)
+{
+ unsigned long ssi2_pdf, ssi2_prepdf;
+
+ ssi2_pdf = PDR1(MXC_CCM_PDR1_SSI2_PODF_MASK,
+ MXC_CCM_PDR1_SSI2_PODF_OFFSET);
+ ssi2_prepdf = PDR1(MXC_CCM_PDR1_SSI2_PRE_PODF_MASK,
+ MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET);
+ return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1);
+}
+
+static unsigned long _clk_firi_get_rate(struct clk *clk)
+{
+ unsigned long firi_pdf, firi_prepdf;
+
+ firi_pdf = PDR1(MXC_CCM_PDR1_FIRI_PODF_MASK,
+ MXC_CCM_PDR1_FIRI_PODF_OFFSET);
+ firi_prepdf = PDR1(MXC_CCM_PDR1_FIRI_PRE_PODF_MASK,
+ MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET);
+ return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1);
+}
+
+static unsigned long _clk_firi_round_rate(struct clk *clk, unsigned long rate)
+{
+ u32 pre, post;
+ u32 parent = clk_get_rate(clk->parent);
+ u32 div = parent / rate;
+
+ if (parent % rate)
+ div++;
+
+ __calc_pre_post_dividers(div, &pre, &post);
+
+ return parent / (pre * post);
+
+}
+
+static int _clk_firi_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
+
+ div = parent / rate;
+
+ if ((parent / div) != rate)
+ return -EINVAL;
+
+ __calc_pre_post_dividers(div, &pre, &post);
+
+ /* Set FIRI clock divider */
+ reg = __raw_readl(MXC_CCM_PDR1) &
+ ~(MXC_CCM_PDR1_FIRI_PODF_MASK | MXC_CCM_PDR1_FIRI_PRE_PODF_MASK);
+ reg |= (pre - 1) << MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET;
+ reg |= (post - 1) << MXC_CCM_PDR1_FIRI_PODF_OFFSET;
+ __raw_writel(reg, MXC_CCM_PDR1);
+
+ return 0;
+}
+
+static unsigned long _clk_mbx_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) / 2;
+}
+
+static unsigned long _clk_mstick1_get_rate(struct clk *clk)
+{
+ unsigned long msti_pdf;
+
+ msti_pdf = PDR2(MXC_CCM_PDR2_MST1_PDF_MASK,
+ MXC_CCM_PDR2_MST1_PDF_OFFSET);
+ return clk_get_rate(clk->parent) / (msti_pdf + 1);
+}
+
+static unsigned long _clk_mstick2_get_rate(struct clk *clk)
+{
+ unsigned long msti_pdf;
+
+ msti_pdf = PDR2(MXC_CCM_PDR2_MST2_PDF_MASK,
+ MXC_CCM_PDR2_MST2_PDF_OFFSET);
+ return clk_get_rate(clk->parent) / (msti_pdf + 1);
+}
+
+static unsigned long ckih_rate;
+
+static unsigned long clk_ckih_get_rate(struct clk *clk)
+{
+ return ckih_rate;
+}
+
+static struct clk ckih_clk = {
+ .name = "ckih",
+ .get_rate = clk_ckih_get_rate,
+};
+
+static unsigned long clk_ckil_get_rate(struct clk *clk)
+{
+ return CKIL_CLK_FREQ;
+}
+
+static struct clk ckil_clk = {
+ .name = "ckil",
+ .get_rate = clk_ckil_get_rate,
+};
+
+static struct clk mcu_pll_clk = {
+ .name = "mcu_pll",
+ .parent = &ckih_clk,
+ .set_rate = _clk_pll_set_rate,
+ .get_rate = _clk_pll_get_rate,
+};
+
+static struct clk mcu_main_clk = {
+ .name = "mcu_main_clk",
+ .parent = &mcu_pll_clk,
+ .get_rate = _clk_mcu_main_get_rate,
+};
+
+static struct clk serial_pll_clk = {
+ .name = "serial_pll",
+ .parent = &ckih_clk,
+ .set_rate = _clk_pll_set_rate,
+ .get_rate = _clk_pll_get_rate,
+ .enable = _clk_serial_pll_enable,
+ .disable = _clk_serial_pll_disable,
+};
+
+static struct clk usb_pll_clk = {
+ .name = "usb_pll",
+ .parent = &ckih_clk,
+ .set_rate = _clk_pll_set_rate,
+ .get_rate = _clk_pll_get_rate,
+ .enable = _clk_usb_pll_enable,
+ .disable = _clk_usb_pll_disable,
+};
+
+static struct clk ahb_clk = {
+ .name = "ahb_clk",
+ .parent = &mcu_main_clk,
+ .get_rate = _clk_hclk_get_rate,
+};
+
+static struct clk per_clk = {
+ .name = "per_clk",
+ .parent = &usb_pll_clk,
+ .get_rate = _clk_per_get_rate,
+};
+
+static struct clk perclk_clk = {
+ .name = "perclk_clk",
+ .parent = &ipg_clk,
+};
+
+static struct clk cspi_clk[] = {
+ {
+ .name = "cspi_clk",
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR2,
+ .enable_shift = MXC_CCM_CGR2_CSPI1_OFFSET,
+ .disable = _clk_disable,},
+ {
+ .name = "cspi_clk",
+ .id = 1,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR2,
+ .enable_shift = MXC_CCM_CGR2_CSPI2_OFFSET,
+ .disable = _clk_disable,},
+ {
+ .name = "cspi_clk",
+ .id = 2,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR0,
+ .enable_shift = MXC_CCM_CGR0_CSPI3_OFFSET,
+ .disable = _clk_disable,},
+};
+
+static struct clk ipg_clk = {
+ .name = "ipg_clk",
+ .parent = &ahb_clk,
+ .get_rate = _clk_ipg_get_rate,
+};
+
+static struct clk emi_clk = {
+ .name = "emi_clk",
+ .parent = &ahb_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR2,
+ .enable_shift = MXC_CCM_CGR2_EMI_OFFSET,
+ .disable = _clk_emi_disable,
+};
+
+static struct clk gpt_clk = {
+ .name = "gpt_clk",
+ .parent = &perclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR0,
+ .enable_shift = MXC_CCM_CGR0_GPT_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk pwm_clk = {
+ .name = "pwm_clk",
+ .parent = &perclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR0,
+ .enable_shift = MXC_CCM_CGR1_PWM_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk epit_clk[] = {
+ {
+ .name = "epit_clk",
+ .id = 0,
+ .parent = &perclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR0,
+ .enable_shift = MXC_CCM_CGR0_EPIT1_OFFSET,
+ .disable = _clk_disable,},
+ {
+ .name = "epit_clk",
+ .id = 1,
+ .parent = &perclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR0,
+ .enable_shift = MXC_CCM_CGR0_EPIT2_OFFSET,
+ .disable = _clk_disable,},
+};
+
+static struct clk nfc_clk = {
+ .name = "nfc_clk",
+ .parent = &ahb_clk,
+ .get_rate = _clk_nfc_get_rate,
+};
+
+static struct clk scc_clk = {
+ .name = "scc_clk",
+ .parent = &ipg_clk,
+};
+
+static struct clk ipu_clk = {
+ .name = "ipu_clk",
+ .parent = &mcu_main_clk,
+ .get_rate = _clk_hsp_get_rate,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR1,
+ .enable_shift = MXC_CCM_CGR1_IPU_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk kpp_clk = {
+ .name = "kpp_clk",
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR1,
+ .enable_shift = MXC_CCM_CGR1_KPP_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk wdog_clk = {
+ .name = "wdog_clk",
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR1,
+ .enable_shift = MXC_CCM_CGR1_WDOG_OFFSET,
+ .disable = _clk_disable,
+};
+static struct clk rtc_clk = {
+ .name = "rtc_clk",
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR1,
+ .enable_shift = MXC_CCM_CGR1_RTC_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk usb_clk[] = {
+ {
+ .name = "usb_clk",
+ .parent = &usb_pll_clk,
+ .get_rate = _clk_usb_get_rate,},
+ {
+ .name = "usb_ahb_clk",
+ .parent = &ahb_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR1,
+ .enable_shift = MXC_CCM_CGR1_USBOTG_OFFSET,
+ .disable = _clk_disable,},
+};
+
+static struct clk csi_clk = {
+ .name = "csi_clk",
+ .parent = &serial_pll_clk,
+ .get_rate = _clk_csi_get_rate,
+ .round_rate = _clk_csi_round_rate,
+ .set_rate = _clk_csi_set_rate,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR1,
+ .enable_shift = MXC_CCM_CGR1_CSI_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk uart_clk[] = {
+ {
+ .name = "uart_clk",
+ .id = 0,
+ .parent = &perclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR0,
+ .enable_shift = MXC_CCM_CGR0_UART1_OFFSET,
+ .disable = _clk_disable,},
+ {
+ .name = "uart_clk",
+ .id = 1,
+ .parent = &perclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR0,
+ .enable_shift = MXC_CCM_CGR0_UART2_OFFSET,
+ .disable = _clk_disable,},
+ {
+ .name = "uart_clk",
+ .id = 2,
+ .parent = &perclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR1,
+ .enable_shift = MXC_CCM_CGR1_UART3_OFFSET,
+ .disable = _clk_disable,},
+ {
+ .name = "uart_clk",
+ .id = 3,
+ .parent = &perclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR1,
+ .enable_shift = MXC_CCM_CGR1_UART4_OFFSET,
+ .disable = _clk_disable,},
+ {
+ .name = "uart_clk",
+ .id = 4,
+ .parent = &perclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR1,
+ .enable_shift = MXC_CCM_CGR1_UART5_OFFSET,
+ .disable = _clk_disable,},
+};
+
+static struct clk i2c_clk[] = {
+ {
+ .name = "i2c_clk",
+ .id = 0,
+ .parent = &perclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR0,
+ .enable_shift = MXC_CCM_CGR0_I2C1_OFFSET,
+ .disable = _clk_disable,},
+ {
+ .name = "i2c_clk",
+ .id = 1,
+ .parent = &perclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR0,
+ .enable_shift = MXC_CCM_CGR0_I2C2_OFFSET,
+ .disable = _clk_disable,},
+ {
+ .name = "i2c_clk",
+ .id = 2,
+ .parent = &perclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR0,
+ .enable_shift = MXC_CCM_CGR0_I2C3_OFFSET,
+ .disable = _clk_disable,},
+};
+
+static struct clk owire_clk = {
+ .name = "owire_clk",
+ .parent = &perclk_clk,
+ .enable_reg = MXC_CCM_CGR1,
+ .enable_shift = MXC_CCM_CGR1_OWIRE_OFFSET,
+ .enable = _clk_enable,
+ .disable = _clk_disable,
+};
+
+static struct clk sdhc_clk[] = {
+ {
+ .name = "sdhc_clk",
+ .id = 0,
+ .parent = &perclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR0,
+ .enable_shift = MXC_CCM_CGR0_SD_MMC1_OFFSET,
+ .disable = _clk_disable,},
+ {
+ .name = "sdhc_clk",
+ .id = 1,
+ .parent = &perclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR0,
+ .enable_shift = MXC_CCM_CGR0_SD_MMC2_OFFSET,
+ .disable = _clk_disable,},
+};
+
+static struct clk ssi_clk[] = {
+ {
+ .name = "ssi_clk",
+ .parent = &serial_pll_clk,
+ .get_rate = _clk_ssi1_get_rate,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR0,
+ .enable_shift = MXC_CCM_CGR0_SSI1_OFFSET,
+ .disable = _clk_disable,},
+ {
+ .name = "ssi_clk",
+ .id = 1,
+ .parent = &serial_pll_clk,
+ .get_rate = _clk_ssi2_get_rate,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR2,
+ .enable_shift = MXC_CCM_CGR2_SSI2_OFFSET,
+ .disable = _clk_disable,},
+};
+
+static struct clk firi_clk = {
+ .name = "firi_clk",
+ .parent = &usb_pll_clk,
+ .round_rate = _clk_firi_round_rate,
+ .set_rate = _clk_firi_set_rate,
+ .get_rate = _clk_firi_get_rate,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR2,
+ .enable_shift = MXC_CCM_CGR2_FIRI_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk ata_clk = {
+ .name = "ata_clk",
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR0,
+ .enable_shift = MXC_CCM_CGR0_ATA_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk mbx_clk = {
+ .name = "mbx_clk",
+ .parent = &ahb_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR2,
+ .enable_shift = MXC_CCM_CGR2_GACC_OFFSET,
+ .get_rate = _clk_mbx_get_rate,
+};
+
+static struct clk vpu_clk = {
+ .name = "vpu_clk",
+ .parent = &ahb_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR2,
+ .enable_shift = MXC_CCM_CGR2_GACC_OFFSET,
+ .get_rate = _clk_mbx_get_rate,
+};
+
+static struct clk rtic_clk = {
+ .name = "rtic_clk",
+ .parent = &ahb_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR2,
+ .enable_shift = MXC_CCM_CGR2_RTIC_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk rng_clk = {
+ .name = "rng_clk",
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR0,
+ .enable_shift = MXC_CCM_CGR0_RNG_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk sdma_clk[] = {
+ {
+ .name = "sdma_ahb_clk",
+ .parent = &ahb_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR0,
+ .enable_shift = MXC_CCM_CGR0_SDMA_OFFSET,
+ .disable = _clk_disable,},
+ {
+ .name = "sdma_ipg_clk",
+ .parent = &ipg_clk,}
+};
+
+static struct clk mpeg4_clk = {
+ .name = "mpeg4_clk",
+ .parent = &ahb_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR1,
+ .enable_shift = MXC_CCM_CGR1_HANTRO_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk vl2cc_clk = {
+ .name = "vl2cc_clk",
+ .parent = &ahb_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR1,
+ .enable_shift = MXC_CCM_CGR1_HANTRO_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk mstick_clk[] = {
+ {
+ .name = "mstick_clk",
+ .id = 0,
+ .parent = &usb_pll_clk,
+ .get_rate = _clk_mstick1_get_rate,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR1,
+ .enable_shift = MXC_CCM_CGR1_MEMSTICK1_OFFSET,
+ .disable = _clk_disable,},
+ {
+ .name = "mstick_clk",
+ .id = 1,
+ .parent = &usb_pll_clk,
+ .get_rate = _clk_mstick2_get_rate,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR1,
+ .enable_shift = MXC_CCM_CGR1_MEMSTICK2_OFFSET,
+ .disable = _clk_disable,},
+};
+
+static struct clk iim_clk = {
+ .name = "iim_clk",
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = MXC_CCM_CGR0,
+ .enable_shift = MXC_CCM_CGR0_IIM_OFFSET,
+ .disable = _clk_disable,
+};
+
+static unsigned long _clk_cko1_round_rate(struct clk *clk, unsigned long rate)
+{
+ u32 div, parent = clk_get_rate(clk->parent);
+
+ div = parent / rate;
+ if (parent % rate)
+ div++;
+
+ if (div > 8)
+ div = 16;
+ else if (div > 4)
+ div = 8;
+ else if (div > 2)
+ div = 4;
+
+ return parent / div;
+}
+
+static int _clk_cko1_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg, div, parent = clk_get_rate(clk->parent);
+
+ div = parent / rate;
+
+ if (div == 16)
+ div = 4;
+ else if (div == 8)
+ div = 3;
+ else if (div == 4)
+ div = 2;
+ else if (div == 2)
+ div = 1;
+ else if (div == 1)
+ div = 0;
+ else
+ return -EINVAL;
+
+ reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOUTDIV_MASK;
+ reg |= div << MXC_CCM_COSR_CLKOUTDIV_OFFSET;
+ __raw_writel(reg, MXC_CCM_COSR);
+
+ return 0;
+}
+
+static unsigned long _clk_cko1_get_rate(struct clk *clk)
+{
+ u32 div;
+
+ div = __raw_readl(MXC_CCM_COSR) & MXC_CCM_COSR_CLKOUTDIV_MASK >>
+ MXC_CCM_COSR_CLKOUTDIV_OFFSET;
+
+ return clk_get_rate(clk->parent) / (1 << div);
+}
+
+static int _clk_cko1_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOSEL_MASK;
+
+ if (parent == &mcu_main_clk)
+ reg |= 0 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+ else if (parent == &ipg_clk)
+ reg |= 1 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+ else if (parent == &usb_pll_clk)
+ reg |= 2 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+ else if (parent == mcu_main_clk.parent)
+ reg |= 3 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+ else if (parent == &ahb_clk)
+ reg |= 5 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+ else if (parent == &serial_pll_clk)
+ reg |= 7 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+ else if (parent == &ckih_clk)
+ reg |= 8 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+ else if (parent == &emi_clk)
+ reg |= 9 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+ else if (parent == &ipu_clk)
+ reg |= 0xA << MXC_CCM_COSR_CLKOSEL_OFFSET;
+ else if (parent == &nfc_clk)
+ reg |= 0xB << MXC_CCM_COSR_CLKOSEL_OFFSET;
+ else if (parent == &uart_clk[0])
+ reg |= 0xC << MXC_CCM_COSR_CLKOSEL_OFFSET;
+ else
+ return -EINVAL;
+
+ __raw_writel(reg, MXC_CCM_COSR);
+
+ return 0;
+}
+
+static int _clk_cko1_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_COSR) | MXC_CCM_COSR_CLKOEN;
+ __raw_writel(reg, MXC_CCM_COSR);
+
+ return 0;
+}
+
+static void _clk_cko1_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOEN;
+ __raw_writel(reg, MXC_CCM_COSR);
+}
+
+static struct clk cko1_clk = {
+ .name = "cko1_clk",
+ .get_rate = _clk_cko1_get_rate,
+ .set_rate = _clk_cko1_set_rate,
+ .round_rate = _clk_cko1_round_rate,
+ .set_parent = _clk_cko1_set_parent,
+ .enable = _clk_cko1_enable,
+ .disable = _clk_cko1_disable,
+};
+
+static struct clk *mxc_clks[] = {
+ &ckih_clk,
+ &ckil_clk,
+ &mcu_pll_clk,
+ &usb_pll_clk,
+ &serial_pll_clk,
+ &mcu_main_clk,
+ &ahb_clk,
+ &per_clk,
+ &perclk_clk,
+ &cko1_clk,
+ &emi_clk,
+ &cspi_clk[0],
+ &cspi_clk[1],
+ &cspi_clk[2],
+ &ipg_clk,
+ &gpt_clk,
+ &pwm_clk,
+ &wdog_clk,
+ &rtc_clk,
+ &epit_clk[0],
+ &epit_clk[1],
+ &nfc_clk,
+ &ipu_clk,
+ &kpp_clk,
+ &usb_clk[0],
+ &usb_clk[1],
+ &csi_clk,
+ &uart_clk[0],
+ &uart_clk[1],
+ &uart_clk[2],
+ &uart_clk[3],
+ &uart_clk[4],
+ &i2c_clk[0],
+ &i2c_clk[1],
+ &i2c_clk[2],
+ &owire_clk,
+ &sdhc_clk[0],
+ &sdhc_clk[1],
+ &ssi_clk[0],
+ &ssi_clk[1],
+ &firi_clk,
+ &ata_clk,
+ &rtic_clk,
+ &rng_clk,
+ &sdma_clk[0],
+ &sdma_clk[1],
+ &mstick_clk[0],
+ &mstick_clk[1],
+ &scc_clk,
+ &iim_clk,
+};
+
+int __init mxc_clocks_init(unsigned long fref)
+{
+ u32 reg;
+ struct clk **clkp;
+
+ ckih_rate = fref;
+
+ for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
+ clk_register(*clkp);
+
+ if (cpu_is_mx31()) {
+ clk_register(&mpeg4_clk);
+ clk_register(&mbx_clk);
+ } else {
+ clk_register(&vpu_clk);
+ clk_register(&vl2cc_clk);
+ }
+
+ /* Turn off all possible clocks */
+ __raw_writel(MXC_CCM_CGR0_GPT_MASK, MXC_CCM_CGR0);
+ __raw_writel(0, MXC_CCM_CGR1);
+
+ __raw_writel(MXC_CCM_CGR2_EMI_MASK |
+ MXC_CCM_CGR2_IPMUX1_MASK |
+ MXC_CCM_CGR2_IPMUX2_MASK |
+ MXC_CCM_CGR2_MXCCLKENSEL_MASK | /* for MX32 */
+ MXC_CCM_CGR2_CHIKCAMPEN_MASK | /* for MX32 */
+ MXC_CCM_CGR2_OVRVPUBUSY_MASK | /* for MX32 */
+ 1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for
+ MX32, but still required to be set */
+ MXC_CCM_CGR2);
+
+ clk_disable(&cko1_clk);
+ clk_disable(&usb_pll_clk);
+
+ pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
+
+ clk_enable(&gpt_clk);
+ clk_enable(&emi_clk);
+ clk_enable(&iim_clk);
+
+ clk_enable(&serial_pll_clk);
+
+ if (mx31_revision() >= CHIP_REV_2_0) {
+ reg = __raw_readl(MXC_CCM_PMCR1);
+ /* No PLL restart on DVFS switch; enable auto EMI handshake */
+ reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
+ __raw_writel(reg, MXC_CCM_PMCR1);
+ }
+
+ return 0;
+}
+
diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-mx3/crm_regs.h
new file mode 100644
index 000000000000..4a0e0ede23bb
--- /dev/null
+++ b/arch/arm/mach-mx3/crm_regs.h
@@ -0,0 +1,401 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_MX3_CRM_REGS_H__
+#define __ARCH_ARM_MACH_MX3_CRM_REGS_H__
+
+#define CKIH_CLK_FREQ 26000000
+#define CKIH_CLK_FREQ_27MHZ 27000000
+#define CKIL_CLK_FREQ 32768
+
+#define MXC_CCM_BASE IO_ADDRESS(CCM_BASE_ADDR)
+
+/* Register addresses */
+#define MXC_CCM_CCMR (MXC_CCM_BASE + 0x00)
+#define MXC_CCM_PDR0 (MXC_CCM_BASE + 0x04)
+#define MXC_CCM_PDR1 (MXC_CCM_BASE + 0x08)
+#define MXC_CCM_RCSR (MXC_CCM_BASE + 0x0C)
+#define MXC_CCM_MPCTL (MXC_CCM_BASE + 0x10)
+#define MXC_CCM_UPCTL (MXC_CCM_BASE + 0x14)
+#define MXC_CCM_SRPCTL (MXC_CCM_BASE + 0x18)
+#define MXC_CCM_COSR (MXC_CCM_BASE + 0x1C)
+#define MXC_CCM_CGR0 (MXC_CCM_BASE + 0x20)
+#define MXC_CCM_CGR1 (MXC_CCM_BASE + 0x24)
+#define MXC_CCM_CGR2 (MXC_CCM_BASE + 0x28)
+#define MXC_CCM_WIMR (MXC_CCM_BASE + 0x2C)
+#define MXC_CCM_LDC (MXC_CCM_BASE + 0x30)
+#define MXC_CCM_DCVR0 (MXC_CCM_BASE + 0x34)
+#define MXC_CCM_DCVR1 (MXC_CCM_BASE + 0x38)
+#define MXC_CCM_DCVR2 (MXC_CCM_BASE + 0x3C)
+#define MXC_CCM_DCVR3 (MXC_CCM_BASE + 0x40)
+#define MXC_CCM_LTR0 (MXC_CCM_BASE + 0x44)
+#define MXC_CCM_LTR1 (MXC_CCM_BASE + 0x48)
+#define MXC_CCM_LTR2 (MXC_CCM_BASE + 0x4C)
+#define MXC_CCM_LTR3 (MXC_CCM_BASE + 0x50)
+#define MXC_CCM_LTBR0 (MXC_CCM_BASE + 0x54)
+#define MXC_CCM_LTBR1 (MXC_CCM_BASE + 0x58)
+#define MXC_CCM_PMCR0 (MXC_CCM_BASE + 0x5C)
+#define MXC_CCM_PMCR1 (MXC_CCM_BASE + 0x60)
+#define MXC_CCM_PDR2 (MXC_CCM_BASE + 0x64)
+
+/* Register bit definitions */
+#define MXC_CCM_CCMR_WBEN (1 << 27)
+#define MXC_CCM_CCMR_CSCS (1 << 25)
+#define MXC_CCM_CCMR_PERCS (1 << 24)
+#define MXC_CCM_CCMR_SSI1S_OFFSET 18
+#define MXC_CCM_CCMR_SSI1S_MASK (0x3 << 18)
+#define MXC_CCM_CCMR_SSI2S_OFFSET 21
+#define MXC_CCM_CCMR_SSI2S_MASK (0x3 << 21)
+#define MXC_CCM_CCMR_LPM_OFFSET 14
+#define MXC_CCM_CCMR_LPM_MASK (0x3 << 14)
+#define MXC_CCM_CCMR_FIRS_OFFSET 11
+#define MXC_CCM_CCMR_FIRS_MASK (0x3 << 11)
+#define MXC_CCM_CCMR_UPE (1 << 9)
+#define MXC_CCM_CCMR_SPE (1 << 8)
+#define MXC_CCM_CCMR_MDS (1 << 7)
+#define MXC_CCM_CCMR_SBYCS (1 << 4)
+#define MXC_CCM_CCMR_MPE (1 << 3)
+#define MXC_CCM_CCMR_PRCS_OFFSET 1
+#define MXC_CCM_CCMR_PRCS_MASK (0x3 << 1)
+
+#define MXC_CCM_PDR0_CSI_PODF_OFFSET 26
+#define MXC_CCM_PDR0_CSI_PODF_MASK (0x3F << 26)
+#define MXC_CCM_PDR0_CSI_PRDF_OFFSET 23
+#define MXC_CCM_PDR0_CSI_PRDF_MASK (0x7 << 23)
+#define MXC_CCM_PDR0_PER_PODF_OFFSET 16
+#define MXC_CCM_PDR0_PER_PODF_MASK (0x1F << 16)
+#define MXC_CCM_PDR0_HSP_PODF_OFFSET 11
+#define MXC_CCM_PDR0_HSP_PODF_MASK (0x7 << 11)
+#define MXC_CCM_PDR0_NFC_PODF_OFFSET 8
+#define MXC_CCM_PDR0_NFC_PODF_MASK (0x7 << 8)
+#define MXC_CCM_PDR0_IPG_PODF_OFFSET 6
+#define MXC_CCM_PDR0_IPG_PODF_MASK (0x3 << 6)
+#define MXC_CCM_PDR0_MAX_PODF_OFFSET 3
+#define MXC_CCM_PDR0_MAX_PODF_MASK (0x7 << 3)
+#define MXC_CCM_PDR0_MCU_PODF_OFFSET 0
+#define MXC_CCM_PDR0_MCU_PODF_MASK 0x7
+
+#define MXC_CCM_PDR0_HSP_DIV_1 (0x0 << 11)
+#define MXC_CCM_PDR0_HSP_DIV_2 (0x1 << 11)
+#define MXC_CCM_PDR0_HSP_DIV_3 (0x2 << 11)
+#define MXC_CCM_PDR0_HSP_DIV_4 (0x3 << 11)
+#define MXC_CCM_PDR0_HSP_DIV_5 (0x4 << 11)
+#define MXC_CCM_PDR0_HSP_DIV_6 (0x5 << 11)
+#define MXC_CCM_PDR0_HSP_DIV_7 (0x6 << 11)
+#define MXC_CCM_PDR0_HSP_DIV_8 (0x7 << 11)
+
+#define MXC_CCM_PDR0_IPG_DIV_1 (0x0 << 6)
+#define MXC_CCM_PDR0_IPG_DIV_2 (0x1 << 6)
+#define MXC_CCM_PDR0_IPG_DIV_3 (0x2 << 6)
+#define MXC_CCM_PDR0_IPG_DIV_4 (0x3 << 6)
+
+#define MXC_CCM_PDR0_MAX_DIV_1 (0x0 << 3)
+#define MXC_CCM_PDR0_MAX_DIV_2 (0x1 << 3)
+#define MXC_CCM_PDR0_MAX_DIV_3 (0x2 << 3)
+#define MXC_CCM_PDR0_MAX_DIV_4 (0x3 << 3)
+#define MXC_CCM_PDR0_MAX_DIV_5 (0x4 << 3)
+#define MXC_CCM_PDR0_MAX_DIV_6 (0x5 << 3)
+#define MXC_CCM_PDR0_MAX_DIV_7 (0x6 << 3)
+#define MXC_CCM_PDR0_MAX_DIV_8 (0x7 << 3)
+
+#define MXC_CCM_PDR0_NFC_DIV_1 (0x0 << 8)
+#define MXC_CCM_PDR0_NFC_DIV_2 (0x1 << 8)
+#define MXC_CCM_PDR0_NFC_DIV_3 (0x2 << 8)
+#define MXC_CCM_PDR0_NFC_DIV_4 (0x3 << 8)
+#define MXC_CCM_PDR0_NFC_DIV_5 (0x4 << 8)
+#define MXC_CCM_PDR0_NFC_DIV_6 (0x5 << 8)
+#define MXC_CCM_PDR0_NFC_DIV_7 (0x6 << 8)
+#define MXC_CCM_PDR0_NFC_DIV_8 (0x7 << 8)
+
+#define MXC_CCM_PDR0_MCU_DIV_1 0x0
+#define MXC_CCM_PDR0_MCU_DIV_2 0x1
+#define MXC_CCM_PDR0_MCU_DIV_3 0x2
+#define MXC_CCM_PDR0_MCU_DIV_4 0x3
+#define MXC_CCM_PDR0_MCU_DIV_5 0x4
+#define MXC_CCM_PDR0_MCU_DIV_6 0x5
+#define MXC_CCM_PDR0_MCU_DIV_7 0x6
+#define MXC_CCM_PDR0_MCU_DIV_8 0x7
+
+#define MXC_CCM_PDR1_USB_PRDF_OFFSET 30
+#define MXC_CCM_PDR1_USB_PRDF_MASK (0x3 << 30)
+#define MXC_CCM_PDR1_USB_PODF_OFFSET 27
+#define MXC_CCM_PDR1_USB_PODF_MASK (0x7 << 27)
+#define MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET 24
+#define MXC_CCM_PDR1_FIRI_PRE_PODF_MASK (0x7 << 24)
+#define MXC_CCM_PDR1_FIRI_PODF_OFFSET 18
+#define MXC_CCM_PDR1_FIRI_PODF_MASK (0x3F << 18)
+#define MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET 15
+#define MXC_CCM_PDR1_SSI2_PRE_PODF_MASK (0x7 << 15)
+#define MXC_CCM_PDR1_SSI2_PODF_OFFSET 9
+#define MXC_CCM_PDR1_SSI2_PODF_MASK (0x3F << 9)
+#define MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET 6
+#define MXC_CCM_PDR1_SSI1_PRE_PODF_MASK (0x7 << 6)
+#define MXC_CCM_PDR1_SSI1_PODF_OFFSET 0
+#define MXC_CCM_PDR1_SSI1_PODF_MASK 0x3F
+
+/* Bit definitions for RCSR */
+#define MXC_CCM_RCSR_NF16B 0x80000000
+
+/* Bit definitions for both MCU, USB and SR PLL control registers */
+#define MXC_CCM_PCTL_BRM 0x80000000
+#define MXC_CCM_PCTL_PD_OFFSET 26
+#define MXC_CCM_PCTL_PD_MASK (0xF << 26)
+#define MXC_CCM_PCTL_MFD_OFFSET 16
+#define MXC_CCM_PCTL_MFD_MASK (0x3FF << 16)
+#define MXC_CCM_PCTL_MFI_OFFSET 10
+#define MXC_CCM_PCTL_MFI_MASK (0xF << 10)
+#define MXC_CCM_PCTL_MFN_OFFSET 0
+#define MXC_CCM_PCTL_MFN_MASK 0x3FF
+
+#define MXC_CCM_CGR0_SD_MMC1_OFFSET 0
+#define MXC_CCM_CGR0_SD_MMC1_MASK (0x3 << 0)
+#define MXC_CCM_CGR0_SD_MMC2_OFFSET 2
+#define MXC_CCM_CGR0_SD_MMC2_MASK (0x3 << 2)
+#define MXC_CCM_CGR0_GPT_OFFSET 4
+#define MXC_CCM_CGR0_GPT_MASK (0x3 << 4)
+#define MXC_CCM_CGR0_EPIT1_OFFSET 6
+#define MXC_CCM_CGR0_EPIT1_MASK (0x3 << 6)
+#define MXC_CCM_CGR0_EPIT2_OFFSET 8
+#define MXC_CCM_CGR0_EPIT2_MASK (0x3 << 8)
+#define MXC_CCM_CGR0_IIM_OFFSET 10
+#define MXC_CCM_CGR0_IIM_MASK (0x3 << 10)
+#define MXC_CCM_CGR0_ATA_OFFSET 12
+#define MXC_CCM_CGR0_ATA_MASK (0x3 << 12)
+#define MXC_CCM_CGR0_SDMA_OFFSET 14
+#define MXC_CCM_CGR0_SDMA_MASK (0x3 << 14)
+#define MXC_CCM_CGR0_CSPI3_OFFSET 16
+#define MXC_CCM_CGR0_CSPI3_MASK (0x3 << 16)
+#define MXC_CCM_CGR0_RNG_OFFSET 18
+#define MXC_CCM_CGR0_RNG_MASK (0x3 << 18)
+#define MXC_CCM_CGR0_UART1_OFFSET 20
+#define MXC_CCM_CGR0_UART1_MASK (0x3 << 20)
+#define MXC_CCM_CGR0_UART2_OFFSET 22
+#define MXC_CCM_CGR0_UART2_MASK (0x3 << 22)
+#define MXC_CCM_CGR0_SSI1_OFFSET 24
+#define MXC_CCM_CGR0_SSI1_MASK (0x3 << 24)
+#define MXC_CCM_CGR0_I2C1_OFFSET 26
+#define MXC_CCM_CGR0_I2C1_MASK (0x3 << 26)
+#define MXC_CCM_CGR0_I2C2_OFFSET 28
+#define MXC_CCM_CGR0_I2C2_MASK (0x3 << 28)
+#define MXC_CCM_CGR0_I2C3_OFFSET 30
+#define MXC_CCM_CGR0_I2C3_MASK (0x3 << 30)
+
+#define MXC_CCM_CGR1_HANTRO_OFFSET 0
+#define MXC_CCM_CGR1_HANTRO_MASK (0x3 << 0)
+#define MXC_CCM_CGR1_MEMSTICK1_OFFSET 2
+#define MXC_CCM_CGR1_MEMSTICK1_MASK (0x3 << 2)
+#define MXC_CCM_CGR1_MEMSTICK2_OFFSET 4
+#define MXC_CCM_CGR1_MEMSTICK2_MASK (0x3 << 4)
+#define MXC_CCM_CGR1_CSI_OFFSET 6
+#define MXC_CCM_CGR1_CSI_MASK (0x3 << 6)
+#define MXC_CCM_CGR1_RTC_OFFSET 8
+#define MXC_CCM_CGR1_RTC_MASK (0x3 << 8)
+#define MXC_CCM_CGR1_WDOG_OFFSET 10
+#define MXC_CCM_CGR1_WDOG_MASK (0x3 << 10)
+#define MXC_CCM_CGR1_PWM_OFFSET 12
+#define MXC_CCM_CGR1_PWM_MASK (0x3 << 12)
+#define MXC_CCM_CGR1_SIM_OFFSET 14
+#define MXC_CCM_CGR1_SIM_MASK (0x3 << 14)
+#define MXC_CCM_CGR1_ECT_OFFSET 16
+#define MXC_CCM_CGR1_ECT_MASK (0x3 << 16)
+#define MXC_CCM_CGR1_USBOTG_OFFSET 18
+#define MXC_CCM_CGR1_USBOTG_MASK (0x3 << 18)
+#define MXC_CCM_CGR1_KPP_OFFSET 20
+#define MXC_CCM_CGR1_KPP_MASK (0x3 << 20)
+#define MXC_CCM_CGR1_IPU_OFFSET 22
+#define MXC_CCM_CGR1_IPU_MASK (0x3 << 22)
+#define MXC_CCM_CGR1_UART3_OFFSET 24
+#define MXC_CCM_CGR1_UART3_MASK (0x3 << 24)
+#define MXC_CCM_CGR1_UART4_OFFSET 26
+#define MXC_CCM_CGR1_UART4_MASK (0x3 << 26)
+#define MXC_CCM_CGR1_UART5_OFFSET 28
+#define MXC_CCM_CGR1_UART5_MASK (0x3 << 28)
+#define MXC_CCM_CGR1_OWIRE_OFFSET 30
+#define MXC_CCM_CGR1_OWIRE_MASK (0x3 << 30)
+
+#define MXC_CCM_CGR2_SSI2_OFFSET 0
+#define MXC_CCM_CGR2_SSI2_MASK (0x3 << 0)
+#define MXC_CCM_CGR2_CSPI1_OFFSET 2
+#define MXC_CCM_CGR2_CSPI1_MASK (0x3 << 2)
+#define MXC_CCM_CGR2_CSPI2_OFFSET 4
+#define MXC_CCM_CGR2_CSPI2_MASK (0x3 << 4)
+#define MXC_CCM_CGR2_GACC_OFFSET 6
+#define MXC_CCM_CGR2_GACC_MASK (0x3 << 6)
+#define MXC_CCM_CGR2_EMI_OFFSET 8
+#define MXC_CCM_CGR2_EMI_MASK (0x3 << 8)
+#define MXC_CCM_CGR2_RTIC_OFFSET 10
+#define MXC_CCM_CGR2_RTIC_MASK (0x3 << 10)
+#define MXC_CCM_CGR2_FIRI_OFFSET 12
+#define MXC_CCM_CGR2_FIRI_MASK (0x3 << 12)
+#define MXC_CCM_CGR2_IPMUX1_OFFSET 14
+#define MXC_CCM_CGR2_IPMUX1_MASK (0x3 << 14)
+#define MXC_CCM_CGR2_IPMUX2_OFFSET 16
+#define MXC_CCM_CGR2_IPMUX2_MASK (0x3 << 16)
+
+/* These new CGR2 bits are added in MX32 */
+#define MXC_CCM_CGR2_APMSYSCLKSEL_OFFSET 18
+#define MXC_CCM_CGR2_APMSYSCLKSEL_MASK (0x3 << 18)
+#define MXC_CCM_CGR2_APMSSICLKSEL_OFFSET 20
+#define MXC_CCM_CGR2_APMSSICLKSEL_MASK (0x3 << 20)
+#define MXC_CCM_CGR2_APMPERCLKSEL_OFFSET 22
+#define MXC_CCM_CGR2_APMPERCLKSEL_MASK (0x3 << 22)
+#define MXC_CCM_CGR2_MXCCLKENSEL_OFFSET 24
+#define MXC_CCM_CGR2_MXCCLKENSEL_MASK (0x1 << 24)
+#define MXC_CCM_CGR2_CHIKCAMPEN_OFFSET 25
+#define MXC_CCM_CGR2_CHIKCAMPEN_MASK (0x1 << 25)
+#define MXC_CCM_CGR2_OVRVPUBUSY_OFFSET 26
+#define MXC_CCM_CGR2_OVRVPUBUSY_MASK (0x1 << 26)
+#define MXC_CCM_CGR2_APMENA_OFFSET 30
+#define MXC_CCM_CGR2_AOMENA_MASK (0x1 << 30)
+
+/*
+ * LTR0 register offsets
+ */
+#define MXC_CCM_LTR0_DIV3CK_OFFSET 1
+#define MXC_CCM_LTR0_DIV3CK_MASK (0x3 << 1)
+#define MXC_CCM_LTR0_DNTHR_OFFSET 16
+#define MXC_CCM_LTR0_DNTHR_MASK (0x3F << 16)
+#define MXC_CCM_LTR0_UPTHR_OFFSET 22
+#define MXC_CCM_LTR0_UPTHR_MASK (0x3F << 22)
+
+/*
+ * LTR1 register offsets
+ */
+#define MXC_CCM_LTR1_PNCTHR_OFFSET 0
+#define MXC_CCM_LTR1_PNCTHR_MASK 0x3F
+#define MXC_CCM_LTR1_UPCNT_OFFSET 6
+#define MXC_CCM_LTR1_UPCNT_MASK (0xFF << 6)
+#define MXC_CCM_LTR1_DNCNT_OFFSET 14
+#define MXC_CCM_LTR1_DNCNT_MASK (0xFF << 14)
+#define MXC_CCM_LTR1_LTBRSR_MASK 0x400000
+#define MXC_CCM_LTR1_LTBRSR_OFFSET 22
+#define MXC_CCM_LTR1_LTBRSR 0x400000
+#define MXC_CCM_LTR1_LTBRSH 0x800000
+
+/*
+ * LTR2 bit definitions. x ranges from 0 for WSW9 to 6 for WSW15
+ */
+#define MXC_CCM_LTR2_WSW_OFFSET(x) (11 + (x) * 3)
+#define MXC_CCM_LTR2_WSW_MASK(x) (0x7 << \
+ MXC_CCM_LTR2_WSW_OFFSET((x)))
+#define MXC_CCM_LTR2_EMAC_OFFSET 0
+#define MXC_CCM_LTR2_EMAC_MASK 0x1FF
+
+/*
+ * LTR3 bit definitions. x ranges from 0 for WSW0 to 8 for WSW8
+ */
+#define MXC_CCM_LTR3_WSW_OFFSET(x) (5 + (x) * 3)
+#define MXC_CCM_LTR3_WSW_MASK(x) (0x7 << \
+ MXC_CCM_LTR3_WSW_OFFSET((x)))
+
+#define MXC_CCM_PMCR0_DFSUP1 0x80000000
+#define MXC_CCM_PMCR0_DFSUP1_SPLL (0 << 31)
+#define MXC_CCM_PMCR0_DFSUP1_MPLL (1 << 31)
+#define MXC_CCM_PMCR0_DFSUP0 0x40000000
+#define MXC_CCM_PMCR0_DFSUP0_PLL (0 << 30)
+#define MXC_CCM_PMCR0_DFSUP0_PDR (1 << 30)
+#define MXC_CCM_PMCR0_DFSUP_MASK (0x3 << 30)
+
+#define DVSUP_TURBO 0
+#define DVSUP_HIGH 1
+#define DVSUP_MEDIUM 2
+#define DVSUP_LOW 3
+#define MXC_CCM_PMCR0_DVSUP_TURBO (DVSUP_TURBO << 28)
+#define MXC_CCM_PMCR0_DVSUP_HIGH (DVSUP_HIGH << 28)
+#define MXC_CCM_PMCR0_DVSUP_MEDIUM (DVSUP_MEDIUM << 28)
+#define MXC_CCM_PMCR0_DVSUP_LOW (DVSUP_LOW << 28)
+#define MXC_CCM_PMCR0_DVSUP_OFFSET 28
+#define MXC_CCM_PMCR0_DVSUP_MASK (0x3 << 28)
+#define MXC_CCM_PMCR0_UDSC 0x08000000
+#define MXC_CCM_PMCR0_UDSC_MASK (1 << 27)
+#define MXC_CCM_PMCR0_UDSC_UP (1 << 27)
+#define MXC_CCM_PMCR0_UDSC_DOWN (0 << 27)
+
+#define MXC_CCM_PMCR0_VSCNT_1 (0x0 << 24)
+#define MXC_CCM_PMCR0_VSCNT_2 (0x1 << 24)
+#define MXC_CCM_PMCR0_VSCNT_3 (0x2 << 24)
+#define MXC_CCM_PMCR0_VSCNT_4 (0x3 << 24)
+#define MXC_CCM_PMCR0_VSCNT_5 (0x4 << 24)
+#define MXC_CCM_PMCR0_VSCNT_6 (0x5 << 24)
+#define MXC_CCM_PMCR0_VSCNT_7 (0x6 << 24)
+#define MXC_CCM_PMCR0_VSCNT_8 (0x7 << 24)
+#define MXC_CCM_PMCR0_VSCNT_OFFSET 24
+#define MXC_CCM_PMCR0_VSCNT_MASK (0x7 << 24)
+#define MXC_CCM_PMCR0_DVFEV 0x00800000
+#define MXC_CCM_PMCR0_DVFIS 0x00400000
+#define MXC_CCM_PMCR0_LBMI 0x00200000
+#define MXC_CCM_PMCR0_LBFL 0x00100000
+#define MXC_CCM_PMCR0_LBCF_4 (0x0 << 18)
+#define MXC_CCM_PMCR0_LBCF_8 (0x1 << 18)
+#define MXC_CCM_PMCR0_LBCF_12 (0x2 << 18)
+#define MXC_CCM_PMCR0_LBCF_16 (0x3 << 18)
+#define MXC_CCM_PMCR0_LBCF_OFFSET 18
+#define MXC_CCM_PMCR0_LBCF_MASK (0x3 << 18)
+#define MXC_CCM_PMCR0_PTVIS 0x00020000
+#define MXC_CCM_PMCR0_UPDTEN 0x00010000
+#define MXC_CCM_PMCR0_UPDTEN_MASK (0x1 << 16)
+#define MXC_CCM_PMCR0_FSVAIM 0x00008000
+#define MXC_CCM_PMCR0_FSVAI_OFFSET 13
+#define MXC_CCM_PMCR0_FSVAI_MASK (0x3 << 13)
+#define MXC_CCM_PMCR0_DPVCR 0x00001000
+#define MXC_CCM_PMCR0_DPVV 0x00000800
+#define MXC_CCM_PMCR0_WFIM 0x00000400
+#define MXC_CCM_PMCR0_DRCE3 0x00000200
+#define MXC_CCM_PMCR0_DRCE2 0x00000100
+#define MXC_CCM_PMCR0_DRCE1 0x00000080
+#define MXC_CCM_PMCR0_DRCE0 0x00000040
+#define MXC_CCM_PMCR0_DCR 0x00000020
+#define MXC_CCM_PMCR0_DVFEN 0x00000010
+#define MXC_CCM_PMCR0_PTVAIM 0x00000008
+#define MXC_CCM_PMCR0_PTVAI_OFFSET 1
+#define MXC_CCM_PMCR0_PTVAI_MASK (0x3 << 1)
+#define MXC_CCM_PMCR0_DPTEN 0x00000001
+
+#define MXC_CCM_PMCR1_DVGP_OFFSET 0
+#define MXC_CCM_PMCR1_DVGP_MASK (0xF)
+
+#define MXC_CCM_PMCR1_PLLRDIS (0x1 << 7)
+#define MXC_CCM_PMCR1_EMIRQ_EN (0x1 << 8)
+
+#define MXC_CCM_DCVR_ULV_MASK (0x3FF << 22)
+#define MXC_CCM_DCVR_ULV_OFFSET 22
+#define MXC_CCM_DCVR_LLV_MASK (0x3FF << 12)
+#define MXC_CCM_DCVR_LLV_OFFSET 12
+#define MXC_CCM_DCVR_ELV_MASK (0x3FF << 2)
+#define MXC_CCM_DCVR_ELV_OFFSET 2
+
+#define MXC_CCM_PDR2_MST2_PDF_MASK (0x3F << 7)
+#define MXC_CCM_PDR2_MST2_PDF_OFFSET 7
+#define MXC_CCM_PDR2_MST1_PDF_MASK 0x3F
+#define MXC_CCM_PDR2_MST1_PDF_OFFSET 0
+
+#define MXC_CCM_COSR_CLKOSEL_MASK 0x0F
+#define MXC_CCM_COSR_CLKOSEL_OFFSET 0
+#define MXC_CCM_COSR_CLKOUTDIV_MASK (0x07 << 6)
+#define MXC_CCM_COSR_CLKOUTDIV_OFFSET 6
+#define MXC_CCM_COSR_CLKOEN (1 << 9)
+
+/*
+ * PMCR0 register offsets
+ */
+#define MXC_CCM_PMCR0_LBFL_OFFSET 20
+#define MXC_CCM_PMCR0_DFSUP0_OFFSET 30
+#define MXC_CCM_PMCR0_DFSUP1_OFFSET 31
+
+#endif /* __ARCH_ARM_MACH_MX3_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
new file mode 100644
index 000000000000..5c0320fce5b6
--- /dev/null
+++ b/arch/arm/mach-mx3/devices.c
@@ -0,0 +1,180 @@
+/*
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/gpio.h>
+#include <asm/hardware.h>
+#include <asm/arch/imx-uart.h>
+
+static struct resource uart0[] = {
+ {
+ .start = UART1_BASE_ADDR,
+ .end = UART1_BASE_ADDR + 0x0B5,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_UART1,
+ .end = MXC_INT_UART1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mxc_uart_device0 = {
+ .name = "imx-uart",
+ .id = 0,
+ .resource = uart0,
+ .num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+ {
+ .start = UART2_BASE_ADDR,
+ .end = UART2_BASE_ADDR + 0x0B5,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_UART2,
+ .end = MXC_INT_UART2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mxc_uart_device1 = {
+ .name = "imx-uart",
+ .id = 1,
+ .resource = uart1,
+ .num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+ {
+ .start = UART3_BASE_ADDR,
+ .end = UART3_BASE_ADDR + 0x0B5,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_UART3,
+ .end = MXC_INT_UART3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mxc_uart_device2 = {
+ .name = "imx-uart",
+ .id = 2,
+ .resource = uart2,
+ .num_resources = ARRAY_SIZE(uart2),
+};
+
+static struct resource uart3[] = {
+ {
+ .start = UART4_BASE_ADDR,
+ .end = UART4_BASE_ADDR + 0x0B5,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_UART4,
+ .end = MXC_INT_UART4,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mxc_uart_device3 = {
+ .name = "imx-uart",
+ .id = 3,
+ .resource = uart3,
+ .num_resources = ARRAY_SIZE(uart3),
+};
+
+static struct resource uart4[] = {
+ {
+ .start = UART5_BASE_ADDR,
+ .end = UART5_BASE_ADDR + 0x0B5,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_UART5,
+ .end = MXC_INT_UART5,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mxc_uart_device4 = {
+ .name = "imx-uart",
+ .id = 4,
+ .resource = uart4,
+ .num_resources = ARRAY_SIZE(uart4),
+};
+
+/*
+ * Register only those UARTs that physically exist
+ */
+int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata)
+{
+ switch (uart_no) {
+ case 0:
+ mxc_uart_device0.dev.platform_data = pdata;
+ platform_device_register(&mxc_uart_device0);
+ break;
+ case 1:
+ mxc_uart_device1.dev.platform_data = pdata;
+ platform_device_register(&mxc_uart_device1);
+ break;
+ case 2:
+ mxc_uart_device2.dev.platform_data = pdata;
+ platform_device_register(&mxc_uart_device2);
+ break;
+ case 3:
+ mxc_uart_device3.dev.platform_data = pdata;
+ platform_device_register(&mxc_uart_device3);
+ break;
+ case 4:
+ mxc_uart_device4.dev.platform_data = pdata;
+ platform_device_register(&mxc_uart_device4);
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+/* GPIO port description */
+static struct mxc_gpio_port imx_gpio_ports[] = {
+ [0] = {
+ .chip.label = "gpio-0",
+ .base = IO_ADDRESS(GPIO1_BASE_ADDR),
+ .irq = MXC_INT_GPIO1,
+ .virtual_irq_start = MXC_GPIO_INT_BASE
+ },
+ [1] = {
+ .chip.label = "gpio-1",
+ .base = IO_ADDRESS(GPIO2_BASE_ADDR),
+ .irq = MXC_INT_GPIO2,
+ .virtual_irq_start = MXC_GPIO_INT_BASE + GPIO_NUM_PIN
+ },
+ [2] = {
+ .chip.label = "gpio-2",
+ .base = IO_ADDRESS(GPIO3_BASE_ADDR),
+ .irq = MXC_INT_GPIO3,
+ .virtual_irq_start = MXC_GPIO_INT_BASE + GPIO_NUM_PIN * 2
+ }
+};
+
+int __init mxc_register_gpios(void)
+{
+ return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+}
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
new file mode 100644
index 000000000000..adc51feefc1d
--- /dev/null
+++ b/arch/arm/mach-mx3/iomux.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <asm/hardware.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/iomux-mx3.h>
+
+/*
+ * IOMUX register (base) addresses
+ */
+#define IOMUX_BASE IO_ADDRESS(IOMUXC_BASE_ADDR)
+#define IOMUXINT_OBS1 (IOMUX_BASE + 0x000)
+#define IOMUXINT_OBS2 (IOMUX_BASE + 0x004)
+#define IOMUXGPR (IOMUX_BASE + 0x008)
+#define IOMUXSW_MUX_CTL (IOMUX_BASE + 0x00C)
+#define IOMUXSW_PAD_CTL (IOMUX_BASE + 0x154)
+
+static DEFINE_SPINLOCK(gpio_mux_lock);
+
+#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
+/*
+ * set the mode for a IOMUX pin.
+ */
+int mxc_iomux_mode(unsigned int pin_mode)
+{
+ u32 reg, field, l, mode, ret = 0;
+
+ reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK);
+ field = pin_mode & 0x3;
+ mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT;
+
+ pr_debug("%s: reg offset = 0x%x field = %d mode = 0x%02x\n",
+ __func__, (pin_mode & IOMUX_REG_MASK), field, mode);
+
+ spin_lock(&gpio_mux_lock);
+
+ l = __raw_readl(reg);
+ l &= ~(0xff << (field * 8));
+ l |= mode << (field * 8);
+ __raw_writel(l, reg);
+
+ spin_unlock(&gpio_mux_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_mode);
+
+/*
+ * This function configures the pad value for a IOMUX pin.
+ */
+void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
+{
+ u32 reg, field, l;
+
+ reg = IOMUXSW_PAD_CTL + (pin + 2) / 3;
+ field = (pin + 2) % 3;
+
+ pr_debug("%s: reg offset = 0x%x field = %d\n",
+ __func__, (pin + 2) / 3, field);
+
+ spin_lock(&gpio_mux_lock);
+
+ l = __raw_readl(reg);
+ l &= ~(0x1ff << (field * 9));
+ l |= config << (field * 9);
+ __raw_writel(l, reg);
+
+ spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_pad);
+
+/*
+ * This function enables/disables the general purpose function for a particular
+ * signal.
+ */
+void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
+{
+ u32 l;
+
+ spin_lock(&gpio_mux_lock);
+ l = __raw_readl(IOMUXGPR);
+ if (en)
+ l |= gp;
+ else
+ l &= ~gp;
+
+ __raw_writel(l, IOMUXGPR);
+ spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_gpr);
+
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 7e89bdc23a9f..eba3e0cd4283 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -26,9 +26,11 @@
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
#include <asm/arch/common.h>
+#include <asm/arch/board-mx31ads.h>
/*!
* @file mx31ads.c
@@ -126,6 +128,16 @@ static void __init mxc_board_init(void)
mxc_init_extuart();
}
+static void __init mx31ads_timer_init(void)
+{
+ mxc_clocks_init(26000000);
+ mxc_timer_init("ipg_clk.0");
+}
+
+struct sys_timer mx31ads_timer = {
+ .init = mx31ads_timer_init,
+};
+
/*
* The following uses standard kernel macros defined in arch.h in order to
* initialize __mach_desc_MX31ADS data structure.
@@ -138,5 +150,5 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS")
.map_io = mx31ads_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
- .timer = &mxc_timer,
+ .timer = &mx31ads_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
new file mode 100644
index 000000000000..1372c1a1fc3f
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/memory.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/arch/common.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <asm/arch/board-mx31lite.h>
+
+/*
+ * This file contains the board-specific initialization routines.
+ */
+
+/*
+ * This structure defines the MX31 memory map.
+ */
+static struct map_desc mx31lite_io_desc[] __initdata = {
+ {
+ .virtual = AIPS1_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
+ .length = AIPS1_SIZE,
+ .type = MT_NONSHARED_DEVICE
+ }, {
+ .virtual = SPBA0_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
+ .length = SPBA0_SIZE,
+ .type = MT_NONSHARED_DEVICE
+ }, {
+ .virtual = AIPS2_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
+ .length = AIPS2_SIZE,
+ .type = MT_NONSHARED_DEVICE
+ }, {
+ .virtual = CS4_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(CS4_BASE_ADDR),
+ .length = CS4_SIZE,
+ .type = MT_DEVICE
+ }
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+void __init mx31lite_map_io(void)
+{
+ mxc_map_io();
+ iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
+}
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+}
+
+static void __init mx31lite_timer_init(void)
+{
+ mxc_clocks_init(26000000);
+ mxc_timer_init("ipg_clk.0");
+}
+
+struct sys_timer mx31lite_timer = {
+ .init = mx31lite_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros defined in arch.h in order to
+ * initialize __mach_desc_MX31LITE data structure.
+ */
+
+MACHINE_START(MX31LITE, "LogicPD MX31 LITEKIT")
+ /* Maintainer: Freescale Semiconductor, Inc. */
+ .phys_io = AIPS1_BASE_ADDR,
+ .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx31lite_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &mx31lite_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
new file mode 100644
index 000000000000..a34ae6de266f
--- /dev/null
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2008 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/memory.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/arch/common.h>
+#include <asm/arch/imx-uart.h>
+#include <asm/arch/iomux-mx3.h>
+#include <asm/arch/board-pcm037.h>
+
+static struct physmap_flash_data pcm037_flash_data = {
+ .width = 2,
+};
+
+static struct resource pcm037_flash_resource = {
+ .start = 0xa0000000,
+ .end = 0xa1ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm037_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &pcm037_flash_data,
+ },
+ .resource = &pcm037_flash_resource,
+ .num_resources = 1,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = 0,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &pcm037_flash,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
+ mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
+ mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
+ mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
+
+ imx_init_uart(0, &uart_pdata);
+
+ mxc_iomux_mode(MX31_PIN_CSPI3_MOSI__RXD3);
+ mxc_iomux_mode(MX31_PIN_CSPI3_MISO__TXD3);
+
+ imx_init_uart(2, &uart_pdata);
+}
+
+/*
+ * This structure defines static mappings for the pcm037 board.
+ */
+static struct map_desc pcm037_io_desc[] __initdata = {
+ {
+ .virtual = AIPS1_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
+ .length = AIPS1_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = AIPS2_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
+ .length = AIPS2_SIZE,
+ .type = MT_DEVICE
+ },
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+void __init pcm037_map_io(void)
+{
+ mxc_map_io();
+ iotable_init(pcm037_io_desc, ARRAY_SIZE(pcm037_io_desc));
+}
+
+static void __init pcm037_timer_init(void)
+{
+ mxc_clocks_init(26000000);
+ mxc_timer_init("ipg_clk.0");
+}
+
+struct sys_timer pcm037_timer = {
+ .init = pcm037_timer_init,
+};
+
+MACHINE_START(PCM037, "Phytec Phycore pcm037")
+ /* Maintainer: Pengutronix */
+ .phys_io = AIPS1_BASE_ADDR,
+ .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = pcm037_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &pcm037_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/time.c b/arch/arm/mach-mx3/time.c
deleted file mode 100644
index fb565c98dbfb..000000000000
--- a/arch/arm/mach-mx3/time.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * System Timer Interrupt reconfigured to run in free-run mode.
- * Author: Vitaly Wool
- * Copyright 2004 MontaVista Software Inc.
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*!
- * @file time.c
- * @brief This file contains OS tick and wdog timer implementations.
- *
- * This file contains OS tick and wdog timer implementations.
- *
- * @ingroup Timers
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/hardware.h>
-#include <asm/mach/time.h>
-#include <asm/io.h>
-#include <asm/arch/common.h>
-
-/*!
- * This is the timer interrupt service routine to do required tasks.
- * It also services the WDOG timer at the frequency of twice per WDOG
- * timeout value. For example, if the WDOG's timeout value is 4 (2
- * seconds since the WDOG runs at 0.5Hz), it will be serviced once
- * every 2/2=1 second.
- *
- * @param irq GPT interrupt source number (not used)
- * @param dev_id this parameter is not used
- * @return always returns \b IRQ_HANDLED as defined in
- * include/linux/interrupt.h.
- */
-static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
-{
- unsigned int next_match;
-
- if (__raw_readl(MXC_GPT_GPTSR) & GPTSR_OF1) {
- do {
- timer_tick();
- next_match = __raw_readl(MXC_GPT_GPTOCR1) + LATCH;
- __raw_writel(GPTSR_OF1, MXC_GPT_GPTSR);
- __raw_writel(next_match, MXC_GPT_GPTOCR1);
- } while ((signed long)(next_match -
- __raw_readl(MXC_GPT_GPTCNT)) <= 0);
- }
-
- return IRQ_HANDLED;
-}
-
-/*!
- * This function is used to obtain the number of microseconds since the last
- * timer interrupt. Note that interrupts is disabled by do_gettimeofday().
- *
- * @return the number of microseconds since the last timer interrupt.
- */
-static unsigned long mxc_gettimeoffset(void)
-{
- unsigned long ticks_to_match, elapsed, usec, tick_usec, i;
-
- /* Get ticks before next timer match */
- ticks_to_match =
- __raw_readl(MXC_GPT_GPTOCR1) - __raw_readl(MXC_GPT_GPTCNT);
-
- /* We need elapsed ticks since last match */
- elapsed = LATCH - ticks_to_match;
-
- /* Now convert them to usec */
- /* Insure no overflow when calculating the usec below */
- for (i = 1, tick_usec = tick_nsec / 1000;; i *= 2) {
- tick_usec /= i;
- if ((0xFFFFFFFF / tick_usec) > elapsed)
- break;
- }
- usec = (unsigned long)(elapsed * tick_usec) / (LATCH / i);
-
- return usec;
-}
-
-/*!
- * The OS tick timer interrupt structure.
- */
-static struct irqaction timer_irq = {
- .name = "MXC Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER,
- .handler = mxc_timer_interrupt
-};
-
-/*!
- * This function is used to initialize the GPT to produce an interrupt
- * based on HZ. It is called by start_kernel() during system startup.
- */
-void __init mxc_init_time(void)
-{
- u32 reg, v;
- reg = __raw_readl(MXC_GPT_GPTCR);
- reg &= ~GPTCR_ENABLE;
- __raw_writel(reg, MXC_GPT_GPTCR);
- reg |= GPTCR_SWR;
- __raw_writel(reg, MXC_GPT_GPTCR);
-
- while ((__raw_readl(MXC_GPT_GPTCR) & GPTCR_SWR) != 0)
- cpu_relax();
-
- reg = GPTCR_FRR | GPTCR_CLKSRC_HIGHFREQ;
- __raw_writel(reg, MXC_GPT_GPTCR);
-
- /* TODO: get timer rate from clk driver */
- v = 66500000;
-
- __raw_writel((v / CLOCK_TICK_RATE) - 1, MXC_GPT_GPTPR);
-
- if ((v % CLOCK_TICK_RATE) != 0) {
- pr_info("\nWARNING: Can't generate CLOCK_TICK_RATE at %d Hz\n",
- CLOCK_TICK_RATE);
- }
- pr_info("Actual CLOCK_TICK_RATE is %d Hz\n",
- v / ((__raw_readl(MXC_GPT_GPTPR) & 0xFFF) + 1));
-
- reg = __raw_readl(MXC_GPT_GPTCNT);
- reg += LATCH;
- __raw_writel(reg, MXC_GPT_GPTOCR1);
-
- setup_irq(MXC_INT_GPT, &timer_irq);
-
- reg = __raw_readl(MXC_GPT_GPTCR);
- reg =
- GPTCR_FRR | GPTCR_CLKSRC_HIGHFREQ | GPTCR_STOPEN | GPTCR_DOZEN |
- GPTCR_WAITEN | GPTCR_ENMOD | GPTCR_ENABLE;
- __raw_writel(reg, MXC_GPT_GPTCR);
-
- __raw_writel(GPTIR_OF1IE, MXC_GPT_GPTIR);
-}
-
-struct sys_timer mxc_timer = {
- .init = mxc_init_time,
- .offset = mxc_gettimeoffset,
-};
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index c06f5254c0f3..1bda8f5d7546 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -3,7 +3,9 @@
#
# Common support
-obj-y := io.o id.o clock.o irq.o mux.o serial.o devices.o
+obj-y := io.o id.o sram.o clock.o irq.o mux.o serial.o devices.o
+
+obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
obj-$(CONFIG_OMAP_MPU_TIMER) += time.o
obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index bcb984f2300f..3f39e0e79c9f 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/clk.h>
@@ -202,7 +203,7 @@ static struct omap_board_config_kernel nokia770_config[] __initdata = {
#define AMPLIFIER_CTRL_GPIO 58
static struct clk *dspxor_ck;
-static DECLARE_MUTEX(audio_pwr_sem);
+static DEFINE_MUTEX(audio_pwr_lock);
/*
* audio_pwr_state
* +--+-------------------------+---------------------------------------+
@@ -218,7 +219,7 @@ static DECLARE_MUTEX(audio_pwr_sem);
static int audio_pwr_state = -1;
/*
- * audio_pwr_up / down should be called under audio_pwr_sem
+ * audio_pwr_up / down should be called under audio_pwr_lock
*/
static void nokia770_audio_pwr_up(void)
{
@@ -237,11 +238,11 @@ static void nokia770_audio_pwr_up(void)
static void codec_delayed_power_down(struct work_struct *work)
{
- down(&audio_pwr_sem);
+ mutex_lock(&audio_pwr_lock);
if (audio_pwr_state == -1)
aic23_power_down();
clk_disable(dspxor_ck);
- up(&audio_pwr_sem);
+ mutex_unlock(&audio_pwr_lock);
}
static DECLARE_DELAYED_WORK(codec_power_down_work, codec_delayed_power_down);
@@ -258,19 +259,19 @@ static void nokia770_audio_pwr_down(void)
static int
nokia770_audio_pwr_up_request(struct dsp_kfunc_device *kdev, int stage)
{
- down(&audio_pwr_sem);
+ mutex_lock(&audio_pwr_lock);
if (audio_pwr_state == -1)
nokia770_audio_pwr_up();
/* force audio_pwr_state = 0, even if it was 1. */
audio_pwr_state = 0;
- up(&audio_pwr_sem);
+ mutex_unlock(&audio_pwr_lock);
return 0;
}
static int
nokia770_audio_pwr_down_request(struct dsp_kfunc_device *kdev, int stage)
{
- down(&audio_pwr_sem);
+ mutex_lock(&audio_pwr_lock);
switch (stage) {
case 1:
if (audio_pwr_state == 0)
@@ -283,7 +284,7 @@ nokia770_audio_pwr_down_request(struct dsp_kfunc_device *kdev, int stage)
}
break;
}
- up(&audio_pwr_sem);
+ mutex_unlock(&audio_pwr_lock);
return 0;
}
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index a66505f58b15..845c66371ca3 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -267,13 +267,17 @@ static struct i2c_board_info __initdata osk_i2c_board_info[] = {
static void __init osk_init_smc91x(void)
{
+ u32 l;
+
if ((gpio_request(0, "smc_irq")) < 0) {
printk("Error requesting gpio 0 for smc91x irq\n");
return;
}
/* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
- EMIFS_CCS(1) |= 0x3;
+ l = omap_readl(EMIFS_CCS(1));
+ l |= 0x3;
+ omap_writel(l, EMIFS_CCS(1));
}
static void __init osk_init_cf(void)
@@ -526,20 +530,26 @@ static void __init osk_mistral_init(void) { }
static void __init osk_init(void)
{
+ u32 l;
+
/* Workaround for wrong CS3 (NOR flash) timing
* There are some U-Boot versions out there which configure
* wrong CS3 memory timings. This mainly leads to CRC
* or similar errors if you use NOR flash (e.g. with JFFS2)
*/
- if (EMIFS_CCS(3) != EMIFS_CS3_VAL)
- EMIFS_CCS(3) = EMIFS_CS3_VAL;
+ l = omap_readl(EMIFS_CCS(3));
+ if (l != EMIFS_CS3_VAL)
+ omap_writel(EMIFS_CS3_VAL, EMIFS_CCS(3));
osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
osk_flash_resource.end += SZ_32M - 1;
platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
omap_board_config = osk_config;
omap_board_config_size = ARRAY_SIZE(osk_config);
- USB_TRANSCEIVER_CTRL_REG |= (3 << 1);
+
+ l = omap_readl(USB_TRANSCEIVER_CTRL);
+ l |= (3 << 1);
+ omap_writel(l, USB_TRANSCEIVER_CTRL);
/* irq for tps65010 chip */
/* bootloader effectively does: omap_cfg_reg(U19_1610_MPUIO1); */
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 30e188109046..0cf62ef5ecb7 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -32,7 +32,7 @@
static void fpga_mask_irq(unsigned int irq)
{
- irq -= OMAP1510_IH_FPGA_BASE;
+ irq -= OMAP_FPGA_IRQ_BASE;
if (irq < 8)
__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO)
@@ -65,7 +65,7 @@ static void fpga_ack_irq(unsigned int irq)
static void fpga_unmask_irq(unsigned int irq)
{
- irq -= OMAP1510_IH_FPGA_BASE;
+ irq -= OMAP_FPGA_IRQ_BASE;
if (irq < 8)
__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO) | (1 << irq)),
@@ -95,8 +95,8 @@ void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc)
if (!stat)
return;
- for (fpga_irq = OMAP1510_IH_FPGA_BASE;
- (fpga_irq < (OMAP1510_IH_FPGA_BASE + NR_FPGA_IRQS)) && stat;
+ for (fpga_irq = OMAP_FPGA_IRQ_BASE;
+ (fpga_irq < OMAP_FPGA_IRQ_END) && stat;
fpga_irq++, stat >>= 1) {
if (stat & 1) {
d = irq_desc + fpga_irq;
@@ -151,7 +151,7 @@ void omap1510_fpga_init_irq(void)
__raw_writeb(0, OMAP1510_FPGA_IMR_HI);
__raw_writeb(0, INNOVATOR_FPGA_IMR2);
- for (i = OMAP1510_IH_FPGA_BASE; i < (OMAP1510_IH_FPGA_BASE + NR_FPGA_IRQS); i++) {
+ for (i = OMAP_FPGA_IRQ_BASE; i < OMAP_FPGA_IRQ_END; i++) {
if (i == OMAP1510_INT_FPGA_TS) {
/*
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
new file mode 100644
index 000000000000..2d2c2522b048
--- /dev/null
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -0,0 +1,280 @@
+/*
+ * linux/arch/arm/mach-omap1/mcbsp.c
+ *
+ * Copyright (C) 2008 Instituto Nokia de Tecnologia
+ * Contact: Eduardo Valentin <eduardo.valentin@indt.org.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Multichannel mode not supported.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <asm/arch/dma.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/dsp_common.h>
+
+#define DPS_RSTCT2_PER_EN (1 << 0)
+#define DSP_RSTCT2_WD_PER_EN (1 << 1)
+
+struct mcbsp_internal_clk {
+ struct clk clk;
+ struct clk **childs;
+ int n_childs;
+};
+
+#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
+static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
+{
+ const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" };
+ int i;
+
+ mclk->n_childs = ARRAY_SIZE(clk_names);
+ mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *),
+ GFP_KERNEL);
+
+ for (i = 0; i < mclk->n_childs; i++) {
+ /* We fake a platform device to get correct device id */
+ struct platform_device pdev;
+
+ pdev.dev.bus = &platform_bus_type;
+ pdev.id = mclk->clk.id;
+ mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]);
+ if (IS_ERR(mclk->childs[i]))
+ printk(KERN_ERR "Could not get clock %s (%d).\n",
+ clk_names[i], mclk->clk.id);
+ }
+}
+
+static int omap_mcbsp_clk_enable(struct clk *clk)
+{
+ struct mcbsp_internal_clk *mclk = container_of(clk,
+ struct mcbsp_internal_clk, clk);
+ int i;
+
+ for (i = 0; i < mclk->n_childs; i++)
+ clk_enable(mclk->childs[i]);
+ return 0;
+}
+
+static void omap_mcbsp_clk_disable(struct clk *clk)
+{
+ struct mcbsp_internal_clk *mclk = container_of(clk,
+ struct mcbsp_internal_clk, clk);
+ int i;
+
+ for (i = 0; i < mclk->n_childs; i++)
+ clk_disable(mclk->childs[i]);
+}
+
+static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
+ {
+ .clk = {
+ .name = "mcbsp_clk",
+ .id = 1,
+ .enable = omap_mcbsp_clk_enable,
+ .disable = omap_mcbsp_clk_disable,
+ },
+ },
+ {
+ .clk = {
+ .name = "mcbsp_clk",
+ .id = 3,
+ .enable = omap_mcbsp_clk_enable,
+ .disable = omap_mcbsp_clk_disable,
+ },
+ },
+};
+
+#define omap_mcbsp_clks_size ARRAY_SIZE(omap_mcbsp_clks)
+#else
+#define omap_mcbsp_clks_size 0
+static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks;
+static inline void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
+{ }
+#endif
+
+static int omap1_mcbsp_check(unsigned int id)
+{
+ /* REVISIT: Check correctly for number of registered McBSPs */
+ if (cpu_is_omap730()) {
+ if (id > OMAP_MAX_MCBSP_COUNT - 2) {
+ printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
+ id + 1);
+ return -ENODEV;
+ }
+ return 0;
+ }
+
+ if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
+ if (id > OMAP_MAX_MCBSP_COUNT - 1) {
+ printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
+ id + 1);
+ return -ENODEV;
+ }
+ return 0;
+ }
+
+ return -ENODEV;
+}
+
+static void omap1_mcbsp_request(unsigned int id)
+{
+ /*
+ * On 1510, 1610 and 1710, McBSP1 and McBSP3
+ * are DSP public peripherals.
+ */
+ if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
+ omap_dsp_request_mem();
+ /*
+ * DSP external peripheral reset
+ * FIXME: This should be moved to dsp code
+ */
+ __raw_writew(__raw_readw(DSP_RSTCT2) | DPS_RSTCT2_PER_EN |
+ DSP_RSTCT2_WD_PER_EN, DSP_RSTCT2);
+ }
+}
+
+static void omap1_mcbsp_free(unsigned int id)
+{
+ if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
+ omap_dsp_release_mem();
+}
+
+static struct omap_mcbsp_ops omap1_mcbsp_ops = {
+ .check = omap1_mcbsp_check,
+ .request = omap1_mcbsp_request,
+ .free = omap1_mcbsp_free,
+};
+
+#ifdef CONFIG_ARCH_OMAP730
+static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
+ {
+ .virt_base = io_p2v(OMAP730_MCBSP1_BASE),
+ .dma_rx_sync = OMAP_DMA_MCBSP1_RX,
+ .dma_tx_sync = OMAP_DMA_MCBSP1_TX,
+ .rx_irq = INT_730_McBSP1RX,
+ .tx_irq = INT_730_McBSP1TX,
+ .ops = &omap1_mcbsp_ops,
+ },
+ {
+ .virt_base = io_p2v(OMAP730_MCBSP2_BASE),
+ .dma_rx_sync = OMAP_DMA_MCBSP3_RX,
+ .dma_tx_sync = OMAP_DMA_MCBSP3_TX,
+ .rx_irq = INT_730_McBSP2RX,
+ .tx_irq = INT_730_McBSP2TX,
+ .ops = &omap1_mcbsp_ops,
+ },
+};
+#define OMAP730_MCBSP_PDATA_SZ ARRAY_SIZE(omap730_mcbsp_pdata)
+#else
+#define omap730_mcbsp_pdata NULL
+#define OMAP730_MCBSP_PDATA_SZ 0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
+ {
+ .virt_base = OMAP1510_MCBSP1_BASE,
+ .dma_rx_sync = OMAP_DMA_MCBSP1_RX,
+ .dma_tx_sync = OMAP_DMA_MCBSP1_TX,
+ .rx_irq = INT_McBSP1RX,
+ .tx_irq = INT_McBSP1TX,
+ .ops = &omap1_mcbsp_ops,
+ .clk_name = "mcbsp_clk",
+ },
+ {
+ .virt_base = io_p2v(OMAP1510_MCBSP2_BASE),
+ .dma_rx_sync = OMAP_DMA_MCBSP2_RX,
+ .dma_tx_sync = OMAP_DMA_MCBSP2_TX,
+ .rx_irq = INT_1510_SPI_RX,
+ .tx_irq = INT_1510_SPI_TX,
+ .ops = &omap1_mcbsp_ops,
+ },
+ {
+ .virt_base = OMAP1510_MCBSP3_BASE,
+ .dma_rx_sync = OMAP_DMA_MCBSP3_RX,
+ .dma_tx_sync = OMAP_DMA_MCBSP3_TX,
+ .rx_irq = INT_McBSP3RX,
+ .tx_irq = INT_McBSP3TX,
+ .ops = &omap1_mcbsp_ops,
+ .clk_name = "mcbsp_clk",
+ },
+};
+#define OMAP15XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap15xx_mcbsp_pdata)
+#else
+#define omap15xx_mcbsp_pdata NULL
+#define OMAP15XX_MCBSP_PDATA_SZ 0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
+ {
+ .virt_base = OMAP1610_MCBSP1_BASE,
+ .dma_rx_sync = OMAP_DMA_MCBSP1_RX,
+ .dma_tx_sync = OMAP_DMA_MCBSP1_TX,
+ .rx_irq = INT_McBSP1RX,
+ .tx_irq = INT_McBSP1TX,
+ .ops = &omap1_mcbsp_ops,
+ .clk_name = "mcbsp_clk",
+ },
+ {
+ .virt_base = io_p2v(OMAP1610_MCBSP2_BASE),
+ .dma_rx_sync = OMAP_DMA_MCBSP2_RX,
+ .dma_tx_sync = OMAP_DMA_MCBSP2_TX,
+ .rx_irq = INT_1610_McBSP2_RX,
+ .tx_irq = INT_1610_McBSP2_TX,
+ .ops = &omap1_mcbsp_ops,
+ },
+ {
+ .virt_base = OMAP1610_MCBSP3_BASE,
+ .dma_rx_sync = OMAP_DMA_MCBSP3_RX,
+ .dma_tx_sync = OMAP_DMA_MCBSP3_TX,
+ .rx_irq = INT_McBSP3RX,
+ .tx_irq = INT_McBSP3TX,
+ .ops = &omap1_mcbsp_ops,
+ .clk_name = "mcbsp_clk",
+ },
+};
+#define OMAP16XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap16xx_mcbsp_pdata)
+#else
+#define omap16xx_mcbsp_pdata NULL
+#define OMAP16XX_MCBSP_PDATA_SZ 0
+#endif
+
+int __init omap1_mcbsp_init(void)
+{
+ int i;
+
+ for (i = 0; i < omap_mcbsp_clks_size; i++) {
+ if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
+ omap_mcbsp_clk_init(&omap_mcbsp_clks[i]);
+ clk_register(&omap_mcbsp_clks[i].clk);
+ }
+ }
+
+ if (cpu_is_omap730())
+ omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata,
+ OMAP730_MCBSP_PDATA_SZ);
+
+ if (cpu_is_omap15xx())
+ omap_mcbsp_register_board_cfg(omap15xx_mcbsp_pdata,
+ OMAP15XX_MCBSP_PDATA_SZ);
+
+ if (cpu_is_omap16xx())
+ omap_mcbsp_register_board_cfg(omap16xx_mcbsp_pdata,
+ OMAP16XX_MCBSP_PDATA_SZ);
+
+ return omap_mcbsp_init();
+}
+
+arch_initcall(omap1_mcbsp_init);
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index e6c64e10b7ec..742f79e73bd7 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -116,13 +116,6 @@ void omap_pm_idle(void)
return;
}
- /*
- * Since an interrupt may set up a timer, we don't want to
- * reprogram the hardware timer with interrupts enabled.
- * Re-enable interrupts only after returning from idle.
- */
- timer_dyn_reprogram();
-
#ifdef CONFIG_OMAP_MPU_TIMER
#warning Enable 32kHz OS timer in order to allow sleep states in idle
use_idlect1 = use_idlect1 & ~(1 << 9);
diff --git a/arch/arm/plat-omap/sram-fn.S b/arch/arm/mach-omap1/sram.S
index 9e1813c77e05..126d252062d7 100644
--- a/arch/arm/plat-omap/sram-fn.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -18,7 +18,7 @@
/*
* Reprograms ULPD and CKCTL.
*/
-ENTRY(sram_reprogram_clock)
+ENTRY(omap1_sram_reprogram_clock)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
mov r2, #IO_ADDRESS(DPLL_CTL) & 0xff000000
@@ -53,5 +53,5 @@ lock: ldrh r4, [r2], #0 @ read back dpll value
out:
ldmfd sp!, {r0 - r12, pc} @ restore regs and return
-ENTRY(sram_reprogram_clock_sz)
- .word . - sram_reprogram_clock
+ENTRY(omap1_sram_reprogram_clock_sz)
+ .word . - omap1_sram_reprogram_clock
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 2feb6870b735..93ee990618ef 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,9 +3,15 @@
#
# Common support
-obj-y := irq.o id.o io.o sram-fn.o memory.o control.o prcm.o clock.o mux.o \
+obj-y := irq.o id.o io.o memory.o control.o prcm.o clock.o mux.o \
devices.o serial.o gpmc.o timer-gp.o
+obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
+
+# Functions loaded to SRAM
+obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o
+obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o
+
# Power Management
obj-$(CONFIG_PM) += pm.o sleep.o
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index ab9fc57d25f1..15675bce8012 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -41,6 +41,24 @@
#define MAX_CLOCK_ENABLE_WAIT 100000
+/* DPLL rate rounding: minimum DPLL multiplier, divider values */
+#define DPLL_MIN_MULTIPLIER 1
+#define DPLL_MIN_DIVIDER 1
+
+/* Possible error results from _dpll_test_mult */
+#define DPLL_MULT_UNDERFLOW (1 << 0)
+
+/*
+ * Scale factor to mitigate roundoff errors in DPLL rate rounding.
+ * The higher the scale factor, the greater the risk of arithmetic overflow,
+ * but the closer the rounded rate to the target rate. DPLL_SCALE_FACTOR
+ * must be a power of DPLL_SCALE_BASE.
+ */
+#define DPLL_SCALE_FACTOR 64
+#define DPLL_SCALE_BASE 2
+#define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \
+ (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
+
u8 cpu_mask;
/*-------------------------------------------------------------------------
@@ -95,7 +113,7 @@ u32 omap2_get_dpll_rate(struct clk *clk)
{
long long dpll_clk;
u32 dpll_mult, dpll_div, dpll;
- const struct dpll_data *dd;
+ struct dpll_data *dd;
dd = clk->dpll_data;
/* REVISIT: What do we return on error? */
@@ -603,7 +621,8 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
clk->rate = clk->parent->rate / new_div;
if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
- __raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL);
+ prm_write_mod_reg(OMAP24XX_VALID_CONFIG,
+ OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
wmb();
}
@@ -723,6 +742,184 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
return 0;
}
+/* DPLL rate rounding code */
+
+/**
+ * omap2_dpll_set_rate_tolerance: set the error tolerance during rate rounding
+ * @clk: struct clk * of the DPLL
+ * @tolerance: maximum rate error tolerance
+ *
+ * Set the maximum DPLL rate error tolerance for the rate rounding
+ * algorithm. The rate tolerance is an attempt to balance DPLL power
+ * saving (the least divider value "n") vs. rate fidelity (the least
+ * difference between the desired DPLL target rate and the rounded
+ * rate out of the algorithm). So, increasing the tolerance is likely
+ * to decrease DPLL power consumption and increase DPLL rate error.
+ * Returns -EINVAL if provided a null clock ptr or a clk that is not a
+ * DPLL; or 0 upon success.
+ */
+int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance)
+{
+ if (!clk || !clk->dpll_data)
+ return -EINVAL;
+
+ clk->dpll_data->rate_tolerance = tolerance;
+
+ return 0;
+}
+
+static unsigned long _dpll_compute_new_rate(unsigned long parent_rate, unsigned int m, unsigned int n)
+{
+ unsigned long long num;
+
+ num = (unsigned long long)parent_rate * m;
+ do_div(num, n);
+ return num;
+}
+
+/*
+ * _dpll_test_mult - test a DPLL multiplier value
+ * @m: pointer to the DPLL m (multiplier) value under test
+ * @n: current DPLL n (divider) value under test
+ * @new_rate: pointer to storage for the resulting rounded rate
+ * @target_rate: the desired DPLL rate
+ * @parent_rate: the DPLL's parent clock rate
+ *
+ * This code tests a DPLL multiplier value, ensuring that the
+ * resulting rate will not be higher than the target_rate, and that
+ * the multiplier value itself is valid for the DPLL. Initially, the
+ * integer pointed to by the m argument should be prescaled by
+ * multiplying by DPLL_SCALE_FACTOR. The code will replace this with
+ * a non-scaled m upon return. This non-scaled m will result in a
+ * new_rate as close as possible to target_rate (but not greater than
+ * target_rate) given the current (parent_rate, n, prescaled m)
+ * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
+ * non-scaled m attempted to underflow, which can allow the calling
+ * function to bail out early; or 0 upon success.
+ */
+static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
+ unsigned long target_rate,
+ unsigned long parent_rate)
+{
+ int flags = 0, carry = 0;
+
+ /* Unscale m and round if necessary */
+ if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
+ carry = 1;
+ *m = (*m / DPLL_SCALE_FACTOR) + carry;
+
+ /*
+ * The new rate must be <= the target rate to avoid programming
+ * a rate that is impossible for the hardware to handle
+ */
+ *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+ if (*new_rate > target_rate) {
+ (*m)--;
+ *new_rate = 0;
+ }
+
+ /* Guard against m underflow */
+ if (*m < DPLL_MIN_MULTIPLIER) {
+ *m = DPLL_MIN_MULTIPLIER;
+ *new_rate = 0;
+ flags = DPLL_MULT_UNDERFLOW;
+ }
+
+ if (*new_rate == 0)
+ *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+
+ return flags;
+}
+
+/**
+ * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
+ * @clk: struct clk * for a DPLL
+ * @target_rate: desired DPLL clock rate
+ *
+ * Given a DPLL, a desired target rate, and a rate tolerance, round
+ * the target rate to a possible, programmable rate for this DPLL.
+ * Rate tolerance is assumed to be set by the caller before this
+ * function is called. Attempts to select the minimum possible n
+ * within the tolerance to reduce power consumption. Stores the
+ * computed (m, n) in the DPLL's dpll_data structure so set_rate()
+ * will not need to call this (expensive) function again. Returns ~0
+ * if the target rate cannot be rounded, either because the rate is
+ * too low or because the rate tolerance is set too tightly; or the
+ * rounded rate upon success.
+ */
+long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
+{
+ int m, n, r, e, scaled_max_m;
+ unsigned long scaled_rt_rp, new_rate;
+ int min_e = -1, min_e_m = -1, min_e_n = -1;
+
+ if (!clk || !clk->dpll_data)
+ return ~0;
+
+ pr_debug("clock: starting DPLL round_rate for clock %s, target rate "
+ "%ld\n", clk->name, target_rate);
+
+ scaled_rt_rp = target_rate / (clk->parent->rate / DPLL_SCALE_FACTOR);
+ scaled_max_m = clk->dpll_data->max_multiplier * DPLL_SCALE_FACTOR;
+
+ clk->dpll_data->last_rounded_rate = 0;
+
+ for (n = clk->dpll_data->max_divider; n >= DPLL_MIN_DIVIDER; n--) {
+
+ /* Compute the scaled DPLL multiplier, based on the divider */
+ m = scaled_rt_rp * n;
+
+ /*
+ * Since we're counting n down, a m overflow means we can
+ * can immediately skip to the next n
+ */
+ if (m > scaled_max_m)
+ continue;
+
+ r = _dpll_test_mult(&m, n, &new_rate, target_rate,
+ clk->parent->rate);
+
+ e = target_rate - new_rate;
+ pr_debug("clock: n = %d: m = %d: rate error is %d "
+ "(new_rate = %ld)\n", n, m, e, new_rate);
+
+ if (min_e == -1 ||
+ min_e >= (int)(abs(e) - clk->dpll_data->rate_tolerance)) {
+ min_e = e;
+ min_e_m = m;
+ min_e_n = n;
+
+ pr_debug("clock: found new least error %d\n", min_e);
+ }
+
+ /*
+ * Since we're counting n down, a m underflow means we
+ * can bail out completely (since as n decreases in
+ * the next iteration, there's no way that m can
+ * increase beyond the current m)
+ */
+ if (r & DPLL_MULT_UNDERFLOW)
+ break;
+ }
+
+ if (min_e < 0) {
+ pr_debug("clock: error: target rate or tolerance too low\n");
+ return ~0;
+ }
+
+ clk->dpll_data->last_rounded_m = min_e_m;
+ clk->dpll_data->last_rounded_n = min_e_n;
+ clk->dpll_data->last_rounded_rate =
+ _dpll_compute_new_rate(clk->parent->rate, min_e_m, min_e_n);
+
+ pr_debug("clock: final least error: e = %d, m = %d, n = %d\n",
+ min_e, min_e_m, min_e_n);
+ pr_debug("clock: final rate: %ld (target rate: %ld)\n",
+ clk->dpll_data->last_rounded_rate, target_rate);
+
+ return clk->dpll_data->last_rounded_rate;
+}
+
/*-------------------------------------------------------------------------
* Omap2 clock reset and init functions
*-------------------------------------------------------------------------*/
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index d5980a9e09a4..3cd37cb57c5a 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -18,11 +18,16 @@
#include <asm/arch/clock.h>
+/* The maximum error between a target DPLL rate and the rounded rate in Hz */
+#define DEFAULT_DPLL_RATE_TOLERANCE 50000
+
int omap2_clk_enable(struct clk *clk);
void omap2_clk_disable(struct clk *clk);
long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
int omap2_clk_set_rate(struct clk *clk, unsigned long rate);
int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent);
+int omap2_dpll_rate_tolerance_set(struct clk *clk, unsigned int tolerance);
+long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate);
#ifdef CONFIG_OMAP_RESET_CLOCKS
void omap2_clk_disable_unused(struct clk *clk);
@@ -42,6 +47,7 @@ long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
u32 omap2_get_dpll_rate(struct clk *clk);
int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
+void omap2_clk_prepare_for_reboot(void);
extern u8 cpu_mask;
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index ece32d8acba4..aa567876651d 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -154,7 +154,7 @@ static void omap2_clk_fixed_disable(struct clk *clk)
* Uses the current prcm set to tell if a rate is valid.
* You can go slower, but not faster within a given rate set.
*/
-static u32 omap2_dpll_round_rate(unsigned long target_rate)
+long omap2_dpllcore_round_rate(unsigned long target_rate)
{
u32 high, low, core_clk_src;
@@ -183,14 +183,14 @@ static u32 omap2_dpll_round_rate(unsigned long target_rate)
}
-static void omap2_dpll_recalc(struct clk *clk)
+static void omap2_dpllcore_recalc(struct clk *clk)
{
clk->rate = omap2_get_dpll_rate_24xx(clk);
propagate_rate(clk);
}
-static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate)
+static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
{
u32 cur_rate, low, mult, div, valid_rate, done_rate;
u32 bypass = 0;
@@ -209,7 +209,7 @@ static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate)
} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
} else if (rate != cur_rate) {
- valid_rate = omap2_dpll_round_rate(rate);
+ valid_rate = omap2_dpllcore_round_rate(rate);
if (valid_rate != rate)
goto dpll_exit;
@@ -256,7 +256,7 @@ static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate)
omap2_init_memory_params(omap2_dll_force_needed());
omap2_reprogram_sdrc(done_rate, 0);
}
- omap2_dpll_recalc(&dpll_ck);
+ omap2_dpllcore_recalc(&dpll_ck);
ret = 0;
dpll_exit:
@@ -383,7 +383,7 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
local_irq_restore(flags);
}
- omap2_dpll_recalc(&dpll_ck);
+ omap2_dpllcore_recalc(&dpll_ck);
return 0;
}
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 88081ed13f96..be4e25554e05 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -30,12 +30,12 @@ static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
static void omap2_sys_clk_recalc(struct clk *clk);
static void omap2_osc_clk_recalc(struct clk *clk);
static void omap2_sys_clk_recalc(struct clk *clk);
-static void omap2_dpll_recalc(struct clk *clk);
+static void omap2_dpllcore_recalc(struct clk *clk);
static int omap2_clk_fixed_enable(struct clk *clk);
static void omap2_clk_fixed_disable(struct clk *clk);
static int omap2_enable_osc_ck(struct clk *clk);
static void omap2_disable_osc_ck(struct clk *clk);
-static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate);
+static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
@@ -665,20 +665,27 @@ static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */
* deal with this
*/
-static const struct dpll_data dpll_dd = {
+static struct dpll_data dpll_dd = {
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
.mult_mask = OMAP24XX_DPLL_MULT_MASK,
.div1_mask = OMAP24XX_DPLL_DIV_MASK,
+ .max_multiplier = 1024,
+ .max_divider = 16,
+ .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
+/*
+ * XXX Cannot add round_rate here yet, as this is still a composite clock,
+ * not just a DPLL
+ */
static struct clk dpll_ck = {
.name = "dpll_ck",
.parent = &sys_ck, /* Can be func_32k also */
.dpll_data = &dpll_dd,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_PROPAGATES | ALWAYS_ENABLED,
- .recalc = &omap2_dpll_recalc,
- .set_rate = &omap2_reprogram_dpll,
+ .recalc = &omap2_dpllcore_recalc,
+ .set_rate = &omap2_reprogram_dpllcore,
};
static struct clk apll96_ck = {
@@ -1747,7 +1754,8 @@ static struct clk gpt12_fck = {
};
static struct clk mcbsp1_ick = {
- .name = "mcbsp1_ick",
+ .name = "mcbsp_ick",
+ .id = 1,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1756,7 +1764,8 @@ static struct clk mcbsp1_ick = {
};
static struct clk mcbsp1_fck = {
- .name = "mcbsp1_fck",
+ .name = "mcbsp_fck",
+ .id = 1,
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1765,7 +1774,8 @@ static struct clk mcbsp1_fck = {
};
static struct clk mcbsp2_ick = {
- .name = "mcbsp2_ick",
+ .name = "mcbsp_ick",
+ .id = 2,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1774,7 +1784,8 @@ static struct clk mcbsp2_ick = {
};
static struct clk mcbsp2_fck = {
- .name = "mcbsp2_fck",
+ .name = "mcbsp_fck",
+ .id = 2,
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1783,7 +1794,8 @@ static struct clk mcbsp2_fck = {
};
static struct clk mcbsp3_ick = {
- .name = "mcbsp3_ick",
+ .name = "mcbsp_ick",
+ .id = 3,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
@@ -1792,7 +1804,8 @@ static struct clk mcbsp3_ick = {
};
static struct clk mcbsp3_fck = {
- .name = "mcbsp3_fck",
+ .name = "mcbsp_fck",
+ .id = 3,
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
@@ -1801,7 +1814,8 @@ static struct clk mcbsp3_fck = {
};
static struct clk mcbsp4_ick = {
- .name = "mcbsp4_ick",
+ .name = "mcbsp_ick",
+ .id = 4,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
@@ -1810,7 +1824,8 @@ static struct clk mcbsp4_ick = {
};
static struct clk mcbsp4_fck = {
- .name = "mcbsp4_fck",
+ .name = "mcbsp_fck",
+ .id = 4,
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
@@ -1819,7 +1834,8 @@ static struct clk mcbsp4_fck = {
};
static struct clk mcbsp5_ick = {
- .name = "mcbsp5_ick",
+ .name = "mcbsp_ick",
+ .id = 5,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
@@ -1828,7 +1844,8 @@ static struct clk mcbsp5_ick = {
};
static struct clk mcbsp5_fck = {
- .name = "mcbsp5_fck",
+ .name = "mcbsp_fck",
+ .id = 5,
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index b42bdd6079a5..4263099b1ad3 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -1,10 +1,11 @@
/*
* OMAP3-specific clock framework functions
*
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
*
* Written by Paul Walmsley
+ * Testing and integration fixes by Jouni Högander
*
* Parts of this code are based on code written by
* Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
@@ -23,6 +24,7 @@
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/limits.h>
#include <asm/arch/clock.h>
#include <asm/arch/sram.h>
@@ -37,8 +39,11 @@
#include "cm.h"
#include "cm-regbits-34xx.h"
-/* CM_CLKEN_PLL*.EN* bit values */
-#define DPLL_LOCKED 0x7
+/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
+#define DPLL_AUTOIDLE_DISABLE 0x0
+#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1
+
+#define MAX_DPLL_WAIT_TRIES 1000000
/**
* omap3_dpll_recalc - recalculate DPLL rate
@@ -53,6 +58,290 @@ static void omap3_dpll_recalc(struct clk *clk)
propagate_rate(clk);
}
+/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
+static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
+{
+ const struct dpll_data *dd;
+
+ dd = clk->dpll_data;
+
+ cm_rmw_reg_bits(dd->enable_mask, clken_bits << __ffs(dd->enable_mask),
+ dd->control_reg);
+}
+
+/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
+static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
+{
+ const struct dpll_data *dd;
+ int i = 0;
+ int ret = -EINVAL;
+ u32 idlest_mask;
+
+ dd = clk->dpll_data;
+
+ state <<= dd->idlest_bit;
+ idlest_mask = 1 << dd->idlest_bit;
+
+ while (((cm_read_reg(dd->idlest_reg) & idlest_mask) != state) &&
+ i < MAX_DPLL_WAIT_TRIES) {
+ i++;
+ udelay(1);
+ }
+
+ if (i == MAX_DPLL_WAIT_TRIES) {
+ printk(KERN_ERR "clock: %s failed transition to '%s'\n",
+ clk->name, (state) ? "locked" : "bypassed");
+ } else {
+ pr_debug("clock: %s transition to '%s' in %d loops\n",
+ clk->name, (state) ? "locked" : "bypassed", i);
+
+ ret = 0;
+ }
+
+ return ret;
+}
+
+/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
+
+/*
+ * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to lock. Waits for the DPLL to report
+ * readiness before returning. Will save and restore the DPLL's
+ * autoidle state across the enable, per the CDP code. If the DPLL
+ * locked successfully, return 0; if the DPLL did not lock in the time
+ * allotted, or DPLL3 was passed in, return -EINVAL.
+ */
+static int _omap3_noncore_dpll_lock(struct clk *clk)
+{
+ u8 ai;
+ int r;
+
+ if (clk == &dpll3_ck)
+ return -EINVAL;
+
+ pr_debug("clock: locking DPLL %s\n", clk->name);
+
+ ai = omap3_dpll_autoidle_read(clk);
+
+ _omap3_dpll_write_clken(clk, DPLL_LOCKED);
+
+ if (ai) {
+ /*
+ * If no downstream clocks are enabled, CM_IDLEST bit
+ * may never become active, so don't wait for DPLL to lock.
+ */
+ r = 0;
+ omap3_dpll_allow_idle(clk);
+ } else {
+ r = _omap3_wait_dpll_status(clk, 1);
+ omap3_dpll_deny_idle(clk);
+ };
+
+ return r;
+}
+
+/*
+ * omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power bypass mode. In
+ * bypass mode, the DPLL's rate is set equal to its parent clock's
+ * rate. Waits for the DPLL to report readiness before returning.
+ * Will save and restore the DPLL's autoidle state across the enable,
+ * per the CDP code. If the DPLL entered bypass mode successfully,
+ * return 0; if the DPLL did not enter bypass in the time allotted, or
+ * DPLL3 was passed in, or the DPLL does not support low-power bypass,
+ * return -EINVAL.
+ */
+static int _omap3_noncore_dpll_bypass(struct clk *clk)
+{
+ int r;
+ u8 ai;
+
+ if (clk == &dpll3_ck)
+ return -EINVAL;
+
+ if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
+ return -EINVAL;
+
+ pr_debug("clock: configuring DPLL %s for low-power bypass\n",
+ clk->name);
+
+ ai = omap3_dpll_autoidle_read(clk);
+
+ _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
+
+ r = _omap3_wait_dpll_status(clk, 0);
+
+ if (ai)
+ omap3_dpll_allow_idle(clk);
+ else
+ omap3_dpll_deny_idle(clk);
+
+ return r;
+}
+
+/*
+ * _omap3_noncore_dpll_stop - instruct a DPLL to stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop. Will save and
+ * restore the DPLL's autoidle state across the stop, per the CDP
+ * code. If DPLL3 was passed in, or the DPLL does not support
+ * low-power stop, return -EINVAL; otherwise, return 0.
+ */
+static int _omap3_noncore_dpll_stop(struct clk *clk)
+{
+ u8 ai;
+
+ if (clk == &dpll3_ck)
+ return -EINVAL;
+
+ if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
+ return -EINVAL;
+
+ pr_debug("clock: stopping DPLL %s\n", clk->name);
+
+ ai = omap3_dpll_autoidle_read(clk);
+
+ _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
+
+ if (ai)
+ omap3_dpll_allow_idle(clk);
+ else
+ omap3_dpll_deny_idle(clk);
+
+ return 0;
+}
+
+/**
+ * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
+ * The choice of modes depends on the DPLL's programmed rate: if it is
+ * the same as the DPLL's parent clock, it will enter bypass;
+ * otherwise, it will enter lock. This code will wait for the DPLL to
+ * indicate readiness before returning, unless the DPLL takes too long
+ * to enter the target state. Intended to be used as the struct clk's
+ * enable function. If DPLL3 was passed in, or the DPLL does not
+ * support low-power stop, or if the DPLL took too long to enter
+ * bypass or lock, return -EINVAL; otherwise, return 0.
+ */
+static int omap3_noncore_dpll_enable(struct clk *clk)
+{
+ int r;
+
+ if (clk == &dpll3_ck)
+ return -EINVAL;
+
+ if (clk->parent->rate == clk_get_rate(clk))
+ r = _omap3_noncore_dpll_bypass(clk);
+ else
+ r = _omap3_noncore_dpll_lock(clk);
+
+ return r;
+}
+
+/**
+ * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
+ * The choice of modes depends on the DPLL's programmed rate: if it is
+ * the same as the DPLL's parent clock, it will enter bypass;
+ * otherwise, it will enter lock. This code will wait for the DPLL to
+ * indicate readiness before returning, unless the DPLL takes too long
+ * to enter the target state. Intended to be used as the struct clk's
+ * enable function. If DPLL3 was passed in, or the DPLL does not
+ * support low-power stop, or if the DPLL took too long to enter
+ * bypass or lock, return -EINVAL; otherwise, return 0.
+ */
+static void omap3_noncore_dpll_disable(struct clk *clk)
+{
+ if (clk == &dpll3_ck)
+ return;
+
+ _omap3_noncore_dpll_stop(clk);
+}
+
+/**
+ * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
+ * @clk: struct clk * of the DPLL to read
+ *
+ * Return the DPLL's autoidle bits, shifted down to bit 0. Returns
+ * -EINVAL if passed a null pointer or if the struct clk does not
+ * appear to refer to a DPLL.
+ */
+static u32 omap3_dpll_autoidle_read(struct clk *clk)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ if (!clk || !clk->dpll_data)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+
+ v = cm_read_reg(dd->autoidle_reg);
+ v &= dd->autoidle_mask;
+ v >>= __ffs(dd->autoidle_mask);
+
+ return v;
+}
+
+/**
+ * omap3_dpll_allow_idle - enable DPLL autoidle bits
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Enable DPLL automatic idle control. This automatic idle mode
+ * switching takes effect only when the DPLL is locked, at least on
+ * OMAP3430. The DPLL will enter low-power stop when its downstream
+ * clocks are gated. No return value.
+ */
+static void omap3_dpll_allow_idle(struct clk *clk)
+{
+ const struct dpll_data *dd;
+
+ if (!clk || !clk->dpll_data)
+ return;
+
+ dd = clk->dpll_data;
+
+ /*
+ * REVISIT: CORE DPLL can optionally enter low-power bypass
+ * by writing 0x5 instead of 0x1. Add some mechanism to
+ * optionally enter this mode.
+ */
+ cm_rmw_reg_bits(dd->autoidle_mask,
+ DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask),
+ dd->autoidle_reg);
+}
+
+/**
+ * omap3_dpll_deny_idle - prevent DPLL from automatically idling
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Disable DPLL automatic idle control. No return value.
+ */
+static void omap3_dpll_deny_idle(struct clk *clk)
+{
+ const struct dpll_data *dd;
+
+ if (!clk || !clk->dpll_data)
+ return;
+
+ dd = clk->dpll_data;
+
+ cm_rmw_reg_bits(dd->autoidle_mask,
+ DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask),
+ dd->autoidle_reg);
+}
+
+/* Clock control for DPLL outputs */
+
/**
* omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
* @clk: DPLL output struct clk
@@ -89,6 +378,8 @@ static void omap3_clkoutx2_recalc(struct clk *clk)
propagate_rate(clk);
}
+/* Common clock code */
+
/*
* As it is structured now, this will prevent an OMAP2/3 multiboot
* kernel from compiling. This will need further attention.
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index c9c5972a2e25..05757eb032bc 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -1,14 +1,19 @@
/*
* OMAP3 clock framework
*
- * Virtual clocks are introduced as a convenient tools.
- * They are sources for other clocks and not supposed
- * to be requested from drivers directly.
- *
* Copyright (C) 2007-2008 Texas Instruments, Inc.
* Copyright (C) 2007-2008 Nokia Corporation
*
* Written by Paul Walmsley
+ * With many device clock fixes by Kevin Hilman and Jouni Högander
+ * DPLL bypass clock support added by Roman Tereshonkov
+ *
+ */
+
+/*
+ * Virtual clocks are introduced as convenient tools.
+ * They are sources for other clocks and not supposed
+ * to be requested from drivers directly.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
@@ -24,6 +29,15 @@
static void omap3_dpll_recalc(struct clk *clk);
static void omap3_clkoutx2_recalc(struct clk *clk);
+static void omap3_dpll_allow_idle(struct clk *clk);
+static void omap3_dpll_deny_idle(struct clk *clk);
+static u32 omap3_dpll_autoidle_read(struct clk *clk);
+static int omap3_noncore_dpll_enable(struct clk *clk);
+static void omap3_noncore_dpll_disable(struct clk *clk);
+
+/* Maximum DPLL multiplier, divider values for OMAP3 */
+#define OMAP3_MAX_DPLL_MULT 2048
+#define OMAP3_MAX_DPLL_DIV 128
/*
* DPLL1 supplies clock to the MPU.
@@ -33,6 +47,11 @@ static void omap3_clkoutx2_recalc(struct clk *clk);
* DPLL5 supplies other peripheral clocks (USBHOST, USIM).
*/
+/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
+#define DPLL_LOW_POWER_STOP 0x1
+#define DPLL_LOW_POWER_BYPASS 0x5
+#define DPLL_LOCKED 0x7
+
/* PRM CLOCKS */
/* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */
@@ -240,15 +259,23 @@ static const struct clksel_rate div16_dpll_rates[] = {
/* DPLL1 */
/* MPU clock source */
/* Type: DPLL */
-static const struct dpll_data dpll1_dd = {
+static struct dpll_data dpll1_dd = {
.mult_div1_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
.mult_mask = OMAP3430_MPU_DPLL_MULT_MASK,
.div1_mask = OMAP3430_MPU_DPLL_DIV_MASK,
.control_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
.enable_mask = OMAP3430_EN_MPU_DPLL_MASK,
+ .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
.auto_recal_bit = OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT,
.recal_en_bit = OMAP3430_MPU_DPLL_RECAL_EN_SHIFT,
.recal_st_bit = OMAP3430_MPU_DPLL_ST_SHIFT,
+ .autoidle_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL),
+ .autoidle_mask = OMAP3430_AUTO_MPU_DPLL_MASK,
+ .idlest_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
+ .idlest_bit = OMAP3430_ST_MPU_CLK_SHIFT,
+ .max_multiplier = OMAP3_MAX_DPLL_MULT,
+ .max_divider = OMAP3_MAX_DPLL_DIV,
+ .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll1_ck = {
@@ -256,6 +283,7 @@ static struct clk dpll1_ck = {
.parent = &sys_ck,
.dpll_data = &dpll1_dd,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+ .round_rate = &omap2_dpll_round_rate,
.recalc = &omap3_dpll_recalc,
};
@@ -297,22 +325,34 @@ static struct clk dpll1_x2m2_ck = {
/* IVA2 clock source */
/* Type: DPLL */
-static const struct dpll_data dpll2_dd = {
+static struct dpll_data dpll2_dd = {
.mult_div1_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
.mult_mask = OMAP3430_IVA2_DPLL_MULT_MASK,
.div1_mask = OMAP3430_IVA2_DPLL_DIV_MASK,
.control_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
.enable_mask = OMAP3430_EN_IVA2_DPLL_MASK,
+ .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) |
+ (1 << DPLL_LOW_POWER_BYPASS),
.auto_recal_bit = OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT,
.recal_en_bit = OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT,
.recal_st_bit = OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT,
+ .autoidle_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL),
+ .autoidle_mask = OMAP3430_AUTO_IVA2_DPLL_MASK,
+ .idlest_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL),
+ .idlest_bit = OMAP3430_ST_IVA2_CLK_SHIFT,
+ .max_multiplier = OMAP3_MAX_DPLL_MULT,
+ .max_divider = OMAP3_MAX_DPLL_DIV,
+ .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll2_ck = {
.name = "dpll2_ck",
.parent = &sys_ck,
.dpll_data = &dpll2_dd,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+ .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+ .enable = &omap3_noncore_dpll_enable,
+ .disable = &omap3_noncore_dpll_disable,
+ .round_rate = &omap2_dpll_round_rate,
.recalc = &omap3_dpll_recalc,
};
@@ -338,10 +378,12 @@ static struct clk dpll2_m2_ck = {
.recalc = &omap2_clksel_recalc,
};
-/* DPLL3 */
-/* Source clock for all interfaces and for some device fclks */
-/* Type: DPLL */
-static const struct dpll_data dpll3_dd = {
+/*
+ * DPLL3
+ * Source clock for all interfaces and for some device fclks
+ * REVISIT: Also supports fast relock bypass - not included below
+ */
+static struct dpll_data dpll3_dd = {
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
.mult_mask = OMAP3430_CORE_DPLL_MULT_MASK,
.div1_mask = OMAP3430_CORE_DPLL_DIV_MASK,
@@ -350,6 +392,11 @@ static const struct dpll_data dpll3_dd = {
.auto_recal_bit = OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT,
.recal_en_bit = OMAP3430_CORE_DPLL_RECAL_EN_SHIFT,
.recal_st_bit = OMAP3430_CORE_DPLL_ST_SHIFT,
+ .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
+ .autoidle_mask = OMAP3430_AUTO_CORE_DPLL_MASK,
+ .max_multiplier = OMAP3_MAX_DPLL_MULT,
+ .max_divider = OMAP3_MAX_DPLL_DIV,
+ .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll3_ck = {
@@ -357,6 +404,7 @@ static struct clk dpll3_ck = {
.parent = &sys_ck,
.dpll_data = &dpll3_dd,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+ .round_rate = &omap2_dpll_round_rate,
.recalc = &omap3_dpll_recalc,
};
@@ -439,7 +487,7 @@ static struct clk core_ck = {
.name = "core_ck",
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_CORE_CLK,
+ .clksel_mask = OMAP3430_ST_CORE_CLK_MASK,
.clksel = core_ck_clksel,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
PARENT_CONTROLS_CLOCK,
@@ -456,7 +504,7 @@ static struct clk dpll3_m2x2_ck = {
.name = "dpll3_m2x2_ck",
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_CORE_CLK,
+ .clksel_mask = OMAP3430_ST_CORE_CLK_MASK,
.clksel = dpll3_m2x2_ck_clksel,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
PARENT_CONTROLS_CLOCK,
@@ -503,7 +551,7 @@ static struct clk emu_core_alwon_ck = {
.parent = &dpll3_m3x2_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_CORE_CLK,
+ .clksel_mask = OMAP3430_ST_CORE_CLK_MASK,
.clksel = emu_core_alwon_ck_clksel,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
PARENT_CONTROLS_CLOCK,
@@ -513,22 +561,33 @@ static struct clk emu_core_alwon_ck = {
/* DPLL4 */
/* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */
/* Type: DPLL */
-static const struct dpll_data dpll4_dd = {
+static struct dpll_data dpll4_dd = {
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
.mult_mask = OMAP3430_PERIPH_DPLL_MULT_MASK,
.div1_mask = OMAP3430_PERIPH_DPLL_DIV_MASK,
.control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_mask = OMAP3430_EN_PERIPH_DPLL_MASK,
+ .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
.auto_recal_bit = OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT,
.recal_en_bit = OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT,
.recal_st_bit = OMAP3430_PERIPH_DPLL_ST_SHIFT,
+ .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
+ .autoidle_mask = OMAP3430_AUTO_PERIPH_DPLL_MASK,
+ .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+ .idlest_bit = OMAP3430_ST_PERIPH_CLK_SHIFT,
+ .max_multiplier = OMAP3_MAX_DPLL_MULT,
+ .max_divider = OMAP3_MAX_DPLL_DIV,
+ .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll4_ck = {
.name = "dpll4_ck",
.parent = &sys_ck,
.dpll_data = &dpll4_dd,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+ .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+ .enable = &omap3_noncore_dpll_enable,
+ .disable = &omap3_noncore_dpll_disable,
+ .round_rate = &omap2_dpll_round_rate,
.recalc = &omap3_dpll_recalc,
};
@@ -584,7 +643,7 @@ static struct clk omap_96m_alwon_fck = {
.parent = &dpll4_m2x2_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_PERIPH_CLK,
+ .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK,
.clksel = omap_96m_alwon_fck_clksel,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
PARENT_CONTROLS_CLOCK,
@@ -610,7 +669,7 @@ static struct clk cm_96m_fck = {
.parent = &dpll4_m2x2_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_PERIPH_CLK,
+ .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK,
.clksel = cm_96m_fck_clksel,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
PARENT_CONTROLS_CLOCK,
@@ -652,7 +711,7 @@ static struct clk virt_omap_54m_fck = {
.parent = &dpll4_m3x2_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_PERIPH_CLK,
+ .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK,
.clksel = virt_omap_54m_fck_clksel,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
PARENT_CONTROLS_CLOCK,
@@ -804,23 +863,33 @@ static struct clk emu_per_alwon_ck = {
/* Supplies 120MHz clock, USIM source clock */
/* Type: DPLL */
/* 3430ES2 only */
-static const struct dpll_data dpll5_dd = {
+static struct dpll_data dpll5_dd = {
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
.mult_mask = OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
.div1_mask = OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
.control_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
.enable_mask = OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
+ .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
.auto_recal_bit = OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT,
.recal_en_bit = OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT,
.recal_st_bit = OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT,
+ .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL),
+ .autoidle_mask = OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK,
+ .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
+ .idlest_bit = OMAP3430ES2_ST_PERIPH2_CLK_SHIFT,
+ .max_multiplier = OMAP3_MAX_DPLL_MULT,
+ .max_divider = OMAP3_MAX_DPLL_DIV,
+ .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll5_ck = {
.name = "dpll5_ck",
.parent = &sys_ck,
.dpll_data = &dpll5_dd,
- .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
- ALWAYS_ENABLED,
+ .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
+ .enable = &omap3_noncore_dpll_enable,
+ .disable = &omap3_noncore_dpll_disable,
+ .round_rate = &omap2_dpll_round_rate,
.recalc = &omap3_dpll_recalc,
};
@@ -1365,7 +1434,8 @@ static const struct clksel mcbsp_15_clksel[] = {
};
static struct clk mcbsp5_fck = {
- .name = "mcbsp5_fck",
+ .name = "mcbsp_fck",
+ .id = 5,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MCBSP5_SHIFT,
@@ -1377,7 +1447,8 @@ static struct clk mcbsp5_fck = {
};
static struct clk mcbsp1_fck = {
- .name = "mcbsp1_fck",
+ .name = "mcbsp_fck",
+ .id = 1,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MCBSP1_SHIFT,
@@ -1789,7 +1860,8 @@ static struct clk gpt10_ick = {
};
static struct clk mcbsp5_ick = {
- .name = "mcbsp5_ick",
+ .name = "mcbsp_ick",
+ .id = 5,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCBSP5_SHIFT,
@@ -1798,7 +1870,8 @@ static struct clk mcbsp5_ick = {
};
static struct clk mcbsp1_ick = {
- .name = "mcbsp1_ick",
+ .name = "mcbsp_ick",
+ .id = 1,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCBSP1_SHIFT,
@@ -1935,7 +2008,7 @@ static struct clk dss1_alwon_fck = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_DSS1_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_PERIPH_CLK,
+ .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK,
.clksel = dss1_alwon_fck_clksel,
.flags = CLOCK_IN_OMAP343X,
.recalc = &omap2_clksel_recalc,
@@ -1991,7 +2064,7 @@ static struct clk cam_mclk = {
.parent = &dpll4_m5x2_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_PERIPH_CLK,
+ .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK,
.clksel = cam_mclk_clksel,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_CAM_SHIFT,
@@ -2541,7 +2614,8 @@ static struct clk gpt2_ick = {
};
static struct clk mcbsp2_ick = {
- .name = "mcbsp2_ick",
+ .name = "mcbsp_ick",
+ .id = 2,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_MCBSP2_SHIFT,
@@ -2550,7 +2624,8 @@ static struct clk mcbsp2_ick = {
};
static struct clk mcbsp3_ick = {
- .name = "mcbsp3_ick",
+ .name = "mcbsp_ick",
+ .id = 3,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_MCBSP3_SHIFT,
@@ -2559,7 +2634,8 @@ static struct clk mcbsp3_ick = {
};
static struct clk mcbsp4_ick = {
- .name = "mcbsp4_ick",
+ .name = "mcbsp_ick",
+ .id = 4,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_MCBSP4_SHIFT,
@@ -2574,7 +2650,8 @@ static const struct clksel mcbsp_234_clksel[] = {
};
static struct clk mcbsp2_fck = {
- .name = "mcbsp2_fck",
+ .name = "mcbsp_fck",
+ .id = 2,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_MCBSP2_SHIFT,
@@ -2586,7 +2663,8 @@ static struct clk mcbsp2_fck = {
};
static struct clk mcbsp3_fck = {
- .name = "mcbsp3_fck",
+ .name = "mcbsp_fck",
+ .id = 3,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_MCBSP3_SHIFT,
@@ -2598,7 +2676,8 @@ static struct clk mcbsp3_fck = {
};
static struct clk mcbsp4_fck = {
- .name = "mcbsp4_fck",
+ .name = "mcbsp_fck",
+ .id = 4,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_MCBSP4_SHIFT,
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 3c38395f6442..ee4c0ca1a708 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -72,7 +72,8 @@
#define OMAP3430_ST_IVA2 (1 << 0)
/* CM_IDLEST_PLL_IVA2 */
-#define OMAP3430_ST_IVA2_CLK (1 << 0)
+#define OMAP3430_ST_IVA2_CLK_SHIFT 0
+#define OMAP3430_ST_IVA2_CLK_MASK (1 << 0)
/* CM_AUTOIDLE_PLL_IVA2 */
#define OMAP3430_AUTO_IVA2_DPLL_SHIFT 0
@@ -115,10 +116,7 @@
#define OMAP3430_ST_MPU (1 << 0)
/* CM_IDLEST_PLL_MPU */
-#define OMAP3430_ST_MPU_CLK (1 << 0)
-#define OMAP3430_ST_IVA2_CLK_MASK (1 << 0)
-
-/* CM_IDLEST_PLL_MPU */
+#define OMAP3430_ST_MPU_CLK_SHIFT 0
#define OMAP3430_ST_MPU_CLK_MASK (1 << 0)
/* CM_AUTOIDLE_PLL_MPU */
@@ -408,8 +406,10 @@
#define OMAP3430_ST_12M_CLK (1 << 4)
#define OMAP3430_ST_48M_CLK (1 << 3)
#define OMAP3430_ST_96M_CLK (1 << 2)
-#define OMAP3430_ST_PERIPH_CLK (1 << 1)
-#define OMAP3430_ST_CORE_CLK (1 << 0)
+#define OMAP3430_ST_PERIPH_CLK_SHIFT 1
+#define OMAP3430_ST_PERIPH_CLK_MASK (1 << 1)
+#define OMAP3430_ST_CORE_CLK_SHIFT 0
+#define OMAP3430_ST_CORE_CLK_MASK (1 << 0)
/* CM_IDLEST2_CKGEN */
#define OMAP3430ES2_ST_120M_CLK_SHIFT 1
@@ -423,6 +423,10 @@
#define OMAP3430_AUTO_CORE_DPLL_SHIFT 0
#define OMAP3430_AUTO_CORE_DPLL_MASK (0x7 << 0)
+/* CM_AUTOIDLE2_PLL */
+#define OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT 0
+#define OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK (0x7 << 0)
+
/* CM_CLKSEL1_PLL */
/* Note that OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK was (0x3 << 27) on 3430ES1 */
#define OMAP3430_CORE_DPLL_CLKOUT_DIV_SHIFT 27
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 8489f3029fed..87a44c715aa4 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -81,6 +81,7 @@
#define OMAP3430ES2_CM_FCLKEN3 0x0008
#define OMAP3430_CM_IDLEST_PLL CM_IDLEST2
#define OMAP3430_CM_AUTOIDLE_PLL CM_AUTOIDLE2
+#define OMAP3430ES2_CM_AUTOIDLE2_PLL CM_AUTOIDLE2
#define OMAP3430_CM_CLKSEL1 CM_CLKSEL
#define OMAP3430_CM_CLKSEL1_PLL CM_CLKSEL
#define OMAP3430_CM_CLKSEL2_PLL CM_CLKSEL2
@@ -96,15 +97,21 @@
/* Clock management domain register get/set */
#ifndef __ASSEMBLER__
-static inline void cm_write_mod_reg(u32 val, s16 module, s16 idx)
+
+extern u32 cm_read_mod_reg(s16 module, u16 idx);
+extern void cm_write_mod_reg(u32 val, s16 module, u16 idx);
+extern u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
+
+static inline u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
- __raw_writel(val, OMAP_CM_REGADDR(module, idx));
+ return cm_rmw_mod_reg_bits(bits, bits, module, idx);
}
-static inline u32 cm_read_mod_reg(s16 module, s16 idx)
+static inline u32 cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
- return __raw_readl(OMAP_CM_REGADDR(module, idx));
+ return cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
}
+
#endif
/* CM register bits shared between 24XX and 3430 */
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index a5d86a49c213..51f70300996f 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -13,22 +13,21 @@
#undef DEBUG
#include <linux/kernel.h>
+#include <linux/io.h>
-#include <asm/io.h>
-
+#include <asm/arch/common.h>
#include <asm/arch/control.h>
-static u32 omap2_ctrl_base;
+static void __iomem *omap2_ctrl_base;
-#define OMAP_CTRL_REGADDR(reg) (void __iomem *)IO_ADDRESS(omap2_ctrl_base \
- + (reg))
+#define OMAP_CTRL_REGADDR(reg) (omap2_ctrl_base + (reg))
-void omap_ctrl_base_set(u32 base)
+void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
{
- omap2_ctrl_base = base;
+ omap2_ctrl_base = omap2_globals->ctrl;
}
-u32 omap_ctrl_base_get(void)
+void __iomem *omap_ctrl_base_get(void)
{
return omap2_ctrl_base;
}
@@ -50,25 +49,16 @@ u32 omap_ctrl_readl(u16 offset)
void omap_ctrl_writeb(u8 val, u16 offset)
{
- pr_debug("omap_ctrl_writeb: writing 0x%0x to 0x%0x\n", val,
- (u32)OMAP_CTRL_REGADDR(offset));
-
__raw_writeb(val, OMAP_CTRL_REGADDR(offset));
}
void omap_ctrl_writew(u16 val, u16 offset)
{
- pr_debug("omap_ctrl_writew: writing 0x%0x to 0x%0x\n", val,
- (u32)OMAP_CTRL_REGADDR(offset));
-
__raw_writew(val, OMAP_CTRL_REGADDR(offset));
}
void omap_ctrl_writel(u32 val, u16 offset)
{
- pr_debug("omap_ctrl_writel: writing 0x%0x to 0x%0x\n", val,
- (u32)OMAP_CTRL_REGADDR(offset));
-
__raw_writel(val, OMAP_CTRL_REGADDR(offset));
}
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 4dfd878d7968..dff4b16cead6 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -17,16 +17,23 @@
#include <asm/io.h>
-#if defined(CONFIG_ARCH_OMAP2420)
-#define OMAP24XX_TAP_BASE io_p2v(0x48014000)
-#endif
+#include <asm/arch/control.h>
+#include <asm/arch/cpu.h>
-#if defined(CONFIG_ARCH_OMAP2430)
-#define OMAP24XX_TAP_BASE io_p2v(0x4900A000)
+#if defined(CONFIG_ARCH_OMAP2420)
+#define TAP_BASE io_p2v(0x48014000)
+#elif defined(CONFIG_ARCH_OMAP2430)
+#define TAP_BASE io_p2v(0x4900A000)
+#elif defined(CONFIG_ARCH_OMAP34XX)
+#define TAP_BASE io_p2v(0x4830A000)
#endif
#define OMAP_TAP_IDCODE 0x0204
+#if defined(CONFIG_ARCH_OMAP34XX)
+#define OMAP_TAP_PROD_ID 0x0210
+#else
#define OMAP_TAP_PROD_ID 0x0208
+#endif
#define OMAP_TAP_DIE_ID_0 0x0218
#define OMAP_TAP_DIE_ID_1 0x021C
@@ -56,9 +63,134 @@ static struct omap_id omap_ids[] __initdata = {
{ .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300000 },
};
+static struct omap_chip_id omap_chip;
+
+/**
+ * omap_chip_is - test whether currently running OMAP matches a chip type
+ * @oc: omap_chip_t to test against
+ *
+ * Test whether the currently-running OMAP chip matches the supplied
+ * chip type 'oc'. Returns 1 upon a match; 0 upon failure.
+ */
+int omap_chip_is(struct omap_chip_id oci)
+{
+ return (oci.oc & omap_chip.oc) ? 1 : 0;
+}
+EXPORT_SYMBOL(omap_chip_is);
+
static u32 __init read_tap_reg(int reg)
{
- return __raw_readl(OMAP24XX_TAP_BASE + reg);
+ unsigned int regval = 0;
+ u32 cpuid;
+
+ /* Reading the IDCODE register on 3430 ES1 results in a
+ * data abort as the register is not exposed on the OCP
+ * Hence reading the Cortex Rev
+ */
+ cpuid = read_cpuid(CPUID_ID);
+
+ /* If the processor type is Cortex-A8 and the revision is 0x0
+ * it means its Cortex r0p0 which is 3430 ES1
+ */
+ if ((((cpuid >> 4) & 0xFFF) == 0xC08) && ((cpuid & 0xF) == 0x0)) {
+ switch (reg) {
+ case OMAP_TAP_IDCODE : regval = 0x0B7AE02F; break;
+ /* Making DevType as 0xF in ES1 to differ from ES2 */
+ case OMAP_TAP_PROD_ID : regval = 0x000F00F0; break;
+ case OMAP_TAP_DIE_ID_0: regval = 0x01000000; break;
+ case OMAP_TAP_DIE_ID_1: regval = 0x1012d687; break;
+ case OMAP_TAP_DIE_ID_2: regval = 0x00000000; break;
+ case OMAP_TAP_DIE_ID_3: regval = 0x2d2c0000; break;
+ }
+ } else
+ regval = __raw_readl(TAP_BASE + reg);
+
+ return regval;
+
+}
+
+/*
+ * _set_system_rev - set the system_rev global based on current OMAP chip type
+ *
+ * Set the system_rev global. This is primarily used by the cpu_is_omapxxxx()
+ * macros.
+ */
+static void __init _set_system_rev(u32 type, u8 rev)
+{
+ u32 i, ctrl_status;
+
+ /*
+ * system_rev encoding is as follows
+ * system_rev & 0xff000000 -> Omap Class (24xx/34xx)
+ * system_rev & 0xfff00000 -> Omap Sub Class (242x/343x)
+ * system_rev & 0xffff0000 -> Omap type (2420/2422/2423/2430/3430)
+ * system_rev & 0x0000f000 -> Silicon revision (ES1, ES2 )
+ * system_rev & 0x00000700 -> Device Type ( EMU/HS/GP/BAD )
+ * system_rev & 0x000000c0 -> IDCODE revision[6:7]
+ * system_rev & 0x0000003f -> sys_boot[0:5]
+ */
+ /* Embedding the ES revision info in type field */
+ system_rev = type;
+ /* Also add IDCODE revision info only two lower bits */
+ system_rev |= ((rev & 0x3) << 6);
+
+ /* Add in the device type and sys_boot fields (see above) */
+ if (cpu_is_omap24xx()) {
+ i = OMAP24XX_CONTROL_STATUS;
+ } else if (cpu_is_omap343x()) {
+ i = OMAP343X_CONTROL_STATUS;
+ } else {
+ printk(KERN_ERR "id: unknown CPU type\n");
+ BUG();
+ }
+ ctrl_status = omap_ctrl_readl(i);
+ system_rev |= (ctrl_status & (OMAP2_SYSBOOT_5_MASK |
+ OMAP2_SYSBOOT_4_MASK |
+ OMAP2_SYSBOOT_3_MASK |
+ OMAP2_SYSBOOT_2_MASK |
+ OMAP2_SYSBOOT_1_MASK |
+ OMAP2_SYSBOOT_0_MASK));
+ system_rev |= (ctrl_status & OMAP2_DEVICETYPE_MASK);
+}
+
+
+/*
+ * _set_omap_chip - set the omap_chip global based on OMAP chip type
+ *
+ * Build the omap_chip bits. This variable is used by powerdomain and
+ * clockdomain code to indicate whether structures are applicable for
+ * the current OMAP chip type by ANDing it against a 'platform' bitfield
+ * in the structure.
+ */
+static void __init _set_omap_chip(void)
+{
+ if (cpu_is_omap343x()) {
+
+ omap_chip.oc = CHIP_IS_OMAP3430;
+ if (is_sil_rev_equal_to(OMAP3430_REV_ES1_0))
+ omap_chip.oc |= CHIP_IS_OMAP3430ES1;
+ else if (is_sil_rev_greater_than(OMAP3430_REV_ES1_0))
+ omap_chip.oc |= CHIP_IS_OMAP3430ES2;
+
+ } else if (cpu_is_omap243x()) {
+
+ /* Currently only supports 2430ES2.1 and 2430-all */
+ omap_chip.oc |= CHIP_IS_OMAP2430;
+
+ } else if (cpu_is_omap242x()) {
+
+ /* Currently only supports 2420ES2.1.1 and 2420-all */
+ omap_chip.oc |= CHIP_IS_OMAP2420;
+
+ } else {
+
+ /* Current CPU not supported by this code. */
+ printk(KERN_WARNING "OMAP chip type code does not yet support "
+ "this CPU type.\n");
+ WARN_ON(1);
+
+ }
+
}
void __init omap2_check_revision(void)
@@ -76,21 +208,31 @@ void __init omap2_check_revision(void)
rev = (idcode >> 28) & 0x0f;
dev_type = (prod_id >> 16) & 0x0f;
-#ifdef DEBUG
- printk(KERN_DEBUG "OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
- idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
- printk(KERN_DEBUG "OMAP_TAP_DIE_ID_0: 0x%08x\n",
- read_tap_reg(OMAP_TAP_DIE_ID_0));
- printk(KERN_DEBUG "OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
- read_tap_reg(OMAP_TAP_DIE_ID_1),
- (read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf);
- printk(KERN_DEBUG "OMAP_TAP_DIE_ID_2: 0x%08x\n",
- read_tap_reg(OMAP_TAP_DIE_ID_2));
- printk(KERN_DEBUG "OMAP_TAP_DIE_ID_3: 0x%08x\n",
- read_tap_reg(OMAP_TAP_DIE_ID_3));
- printk(KERN_DEBUG "OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
- prod_id, dev_type);
-#endif
+ pr_debug("OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
+ idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
+ pr_debug("OMAP_TAP_DIE_ID_0: 0x%08x\n",
+ read_tap_reg(OMAP_TAP_DIE_ID_0));
+ pr_debug("OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
+ read_tap_reg(OMAP_TAP_DIE_ID_1),
+ (read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf);
+ pr_debug("OMAP_TAP_DIE_ID_2: 0x%08x\n",
+ read_tap_reg(OMAP_TAP_DIE_ID_2));
+ pr_debug("OMAP_TAP_DIE_ID_3: 0x%08x\n",
+ read_tap_reg(OMAP_TAP_DIE_ID_3));
+ pr_debug("OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
+ prod_id, dev_type);
+
+ /*
+ * Detection for 34xx ES2.0 and above can be done with just
+ * hawkeye and rev. See TRM 1.5.2 Device Identification.
+ * Note that rev cannot be used directly as ES1.0 uses value 0.
+ */
+ if (hawkeye == 0xb7ae) {
+ system_rev = 0x34300000 | ((1 + rev) << 12);
+ pr_info("OMAP%04x ES2.%i\n", system_rev >> 16, rev);
+ _set_omap_chip();
+ return;
+ }
/* Check hawkeye ids */
for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
@@ -114,16 +256,15 @@ void __init omap2_check_revision(void)
omap_ids[i].type >> 16);
j = i;
}
- system_rev = omap_ids[j].type;
- system_rev |= rev << 8;
+ _set_system_rev(omap_ids[j].type, rev);
- /* Add the cpu class info (24xx) */
- system_rev |= 0x24;
+ _set_omap_chip();
pr_info("OMAP%04x", system_rev >> 16);
if ((system_rev >> 8) & 0x0f)
- printk("%x", (system_rev >> 8) & 0x0f);
- printk("\n");
+ pr_info("ES%x", (system_rev >> 12) & 0xf);
+ pr_info("\n");
+
}
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
new file mode 100644
index 000000000000..17cf199d1130
--- /dev/null
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -0,0 +1,208 @@
+/*
+ * linux/arch/arm/mach-omap2/mcbsp.c
+ *
+ * Copyright (C) 2008 Instituto Nokia de Tecnologia
+ * Contact: Eduardo Valentin <eduardo.valentin@indt.org.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Multichannel mode not supported.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <asm/arch/dma.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/mcbsp.h>
+
+struct mcbsp_internal_clk {
+ struct clk clk;
+ struct clk **childs;
+ int n_childs;
+};
+
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
+{
+ const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
+ int i;
+
+ mclk->n_childs = ARRAY_SIZE(clk_names);
+ mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *),
+ GFP_KERNEL);
+
+ for (i = 0; i < mclk->n_childs; i++) {
+ /* We fake a platform device to get correct device id */
+ struct platform_device pdev;
+
+ pdev.dev.bus = &platform_bus_type;
+ pdev.id = mclk->clk.id;
+ mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]);
+ if (IS_ERR(mclk->childs[i]))
+ printk(KERN_ERR "Could not get clock %s (%d).\n",
+ clk_names[i], mclk->clk.id);
+ }
+}
+
+static int omap_mcbsp_clk_enable(struct clk *clk)
+{
+ struct mcbsp_internal_clk *mclk = container_of(clk,
+ struct mcbsp_internal_clk, clk);
+ int i;
+
+ for (i = 0; i < mclk->n_childs; i++)
+ clk_enable(mclk->childs[i]);
+ return 0;
+}
+
+static void omap_mcbsp_clk_disable(struct clk *clk)
+{
+ struct mcbsp_internal_clk *mclk = container_of(clk,
+ struct mcbsp_internal_clk, clk);
+ int i;
+
+ for (i = 0; i < mclk->n_childs; i++)
+ clk_disable(mclk->childs[i]);
+}
+
+static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
+ {
+ .clk = {
+ .name = "mcbsp_clk",
+ .id = 1,
+ .enable = omap_mcbsp_clk_enable,
+ .disable = omap_mcbsp_clk_disable,
+ },
+ },
+ {
+ .clk = {
+ .name = "mcbsp_clk",
+ .id = 2,
+ .enable = omap_mcbsp_clk_enable,
+ .disable = omap_mcbsp_clk_disable,
+ },
+ },
+};
+
+#define omap_mcbsp_clks_size ARRAY_SIZE(omap_mcbsp_clks)
+#else
+#define omap_mcbsp_clks_size 0
+static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks;
+static inline void omap_mcbsp_clk_init(struct clk *clk)
+{ }
+#endif
+
+static void omap2_mcbsp2_mux_setup(void)
+{
+ omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
+ omap_cfg_reg(R14_24XX_MCBSP2_FSX);
+ omap_cfg_reg(W15_24XX_MCBSP2_DR);
+ omap_cfg_reg(V15_24XX_MCBSP2_DX);
+ omap_cfg_reg(V14_24XX_GPIO117);
+ /*
+ * TODO: Need to add MUX settings for OMAP 2430 SDP
+ */
+}
+
+static void omap2_mcbsp_request(unsigned int id)
+{
+ if (cpu_is_omap2420() && (id == OMAP_MCBSP2))
+ omap2_mcbsp2_mux_setup();
+}
+
+static int omap2_mcbsp_check(unsigned int id)
+{
+ if (id > OMAP_MAX_MCBSP_COUNT - 1) {
+ printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1);
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static struct omap_mcbsp_ops omap2_mcbsp_ops = {
+ .request = omap2_mcbsp_request,
+ .check = omap2_mcbsp_check,
+};
+
+#ifdef CONFIG_ARCH_OMAP24XX
+static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
+ {
+ .virt_base = IO_ADDRESS(OMAP24XX_MCBSP1_BASE),
+ .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX,
+ .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
+ .rx_irq = INT_24XX_MCBSP1_IRQ_RX,
+ .tx_irq = INT_24XX_MCBSP1_IRQ_TX,
+ .ops = &omap2_mcbsp_ops,
+ .clk_name = "mcbsp_clk",
+ },
+ {
+ .virt_base = IO_ADDRESS(OMAP24XX_MCBSP2_BASE),
+ .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX,
+ .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
+ .rx_irq = INT_24XX_MCBSP2_IRQ_RX,
+ .tx_irq = INT_24XX_MCBSP2_IRQ_TX,
+ .ops = &omap2_mcbsp_ops,
+ .clk_name = "mcbsp_clk",
+ },
+};
+#define OMAP24XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap24xx_mcbsp_pdata)
+#else
+#define omap24xx_mcbsp_pdata NULL
+#define OMAP24XX_MCBSP_PDATA_SZ 0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
+ {
+ .virt_base = IO_ADDRESS(OMAP34XX_MCBSP1_BASE),
+ .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX,
+ .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
+ .rx_irq = INT_24XX_MCBSP1_IRQ_RX,
+ .tx_irq = INT_24XX_MCBSP1_IRQ_TX,
+ .ops = &omap2_mcbsp_ops,
+ .clk_name = "mcbsp_clk",
+ },
+ {
+ .virt_base = IO_ADDRESS(OMAP34XX_MCBSP2_BASE),
+ .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX,
+ .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
+ .rx_irq = INT_24XX_MCBSP2_IRQ_RX,
+ .tx_irq = INT_24XX_MCBSP2_IRQ_TX,
+ .ops = &omap2_mcbsp_ops,
+ .clk_name = "mcbsp_clk",
+ },
+};
+#define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata)
+#else
+#define omap34xx_mcbsp_pdata NULL
+#define OMAP34XX_MCBSP_PDATA_SZ 0
+#endif
+
+int __init omap2_mcbsp_init(void)
+{
+ int i;
+
+ for (i = 0; i < omap_mcbsp_clks_size; i++) {
+ /* Once we call clk_get inside init, we do not register it */
+ omap_mcbsp_clk_init(&omap_mcbsp_clks[i]);
+ clk_register(&omap_mcbsp_clks[i].clk);
+ }
+
+ if (cpu_is_omap24xx())
+ omap_mcbsp_register_board_cfg(omap24xx_mcbsp_pdata,
+ OMAP24XX_MCBSP_PDATA_SZ);
+
+ if (cpu_is_omap34xx())
+ omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata,
+ OMAP34XX_MCBSP_PDATA_SZ);
+
+ return omap_mcbsp_init();
+}
+arch_initcall(omap2_mcbsp_init);
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index 12479081881a..73cadb2c75cf 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -24,6 +24,7 @@
#include <asm/io.h>
+#include <asm/arch/common.h>
#include <asm/arch/clock.h>
#include <asm/arch/sram.h>
@@ -32,8 +33,8 @@
#include "memory.h"
#include "sdrc.h"
-unsigned long omap2_sdrc_base;
-unsigned long omap2_sms_base;
+void __iomem *omap2_sdrc_base;
+void __iomem *omap2_sms_base;
static struct memory_timings mem_timings;
static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2;
@@ -154,6 +155,12 @@ void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
}
+void __init omap2_set_globals_memory(struct omap_globals *omap2_globals)
+{
+ omap2_sdrc_base = omap2_globals->sdrc;
+ omap2_sms_base = omap2_globals->sms;
+}
+
/* turn on smart idle modes for SDRAM scheduler and controller */
void __init omap2_init_memory(void)
{
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 930770012a75..8f98b20f30a1 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -236,7 +236,7 @@ void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u8 reg)
warn = (orig != reg);
if (debug || warn)
printk(KERN_WARNING
- "MUX: setup %s (0x%08x): 0x%02x -> 0x%02x\n",
+ "MUX: setup %s (0x%p): 0x%04x -> 0x%04x\n",
cfg->name, omap_ctrl_base_get() + cfg->mux_reg,
orig, reg);
}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index aad781dcf1b1..d6c9de82ca0c 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -57,13 +57,6 @@ void omap2_pm_idle(void)
return;
}
- /*
- * Since an interrupt may set up a timer, we don't want to
- * reprogram the hardware timer with interrupts enabled.
- * Re-enable interrupts only after returning from idle.
- */
- timer_dyn_reprogram();
-
omap2_sram_idle();
local_fiq_enable();
local_irq_enable();
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index cacb34086e35..54c32f482131 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -32,6 +32,7 @@
/* Chip-specific module offsets */
+#define OMAP24XX_GR_MOD OCP_MOD
#define OMAP24XX_DSP_MOD 0x800
#define OMAP2430_MDM_MOD 0xc00
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index b12f423b8595..fd92a80f38f2 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -16,16 +16,21 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/clk.h>
+#include <linux/io.h>
-#include <asm/io.h>
+#include <asm/arch/common.h>
+#include <asm/arch/prcm.h>
+#include "clock.h"
#include "prm.h"
#include "prm-regbits-24xx.h"
-extern void omap2_clk_prepare_for_reboot(void);
+static void __iomem *prm_base;
+static void __iomem *cm_base;
u32 omap_prcm_get_reset_sources(void)
{
+ /* XXX This presumably needs modification for 34XX */
return prm_read_mod_reg(WKUP_MOD, RM_RSTST) & 0x7f;
}
EXPORT_SYMBOL(omap_prcm_get_reset_sources);
@@ -33,11 +38,90 @@ EXPORT_SYMBOL(omap_prcm_get_reset_sources);
/* Resets clock rates and reboots the system. Only called from system.h */
void omap_prcm_arch_reset(char mode)
{
- u32 wkup;
+ s16 prcm_offs;
omap2_clk_prepare_for_reboot();
- if (cpu_is_omap24xx()) {
- wkup = prm_read_mod_reg(WKUP_MOD, RM_RSTCTRL) | OMAP_RST_DPLL3;
- prm_write_mod_reg(wkup, WKUP_MOD, RM_RSTCTRL);
- }
+ if (cpu_is_omap24xx())
+ prcm_offs = WKUP_MOD;
+ else if (cpu_is_omap34xx())
+ prcm_offs = OMAP3430_GR_MOD;
+ else
+ WARN_ON(1);
+
+ prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs, RM_RSTCTRL);
+}
+
+static inline u32 __omap_prcm_read(void __iomem *base, s16 module, u16 reg)
+{
+ BUG_ON(!base);
+ return __raw_readl(base + module + reg);
+}
+
+static inline void __omap_prcm_write(u32 value, void __iomem *base,
+ s16 module, u16 reg)
+{
+ BUG_ON(!base);
+ __raw_writel(value, base + module + reg);
+}
+
+/* Read a register in a PRM module */
+u32 prm_read_mod_reg(s16 module, u16 idx)
+{
+ return __omap_prcm_read(prm_base, module, idx);
+}
+EXPORT_SYMBOL(prm_read_mod_reg);
+
+/* Write into a register in a PRM module */
+void prm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+ __omap_prcm_write(val, prm_base, module, idx);
+}
+EXPORT_SYMBOL(prm_write_mod_reg);
+
+/* Read-modify-write a register in a PRM module. Caller must lock */
+u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
+{
+ u32 v;
+
+ v = prm_read_mod_reg(module, idx);
+ v &= ~mask;
+ v |= bits;
+ prm_write_mod_reg(v, module, idx);
+
+ return v;
+}
+EXPORT_SYMBOL(prm_rmw_mod_reg_bits);
+
+/* Read a register in a CM module */
+u32 cm_read_mod_reg(s16 module, u16 idx)
+{
+ return __omap_prcm_read(cm_base, module, idx);
+}
+EXPORT_SYMBOL(cm_read_mod_reg);
+
+/* Write into a register in a CM module */
+void cm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+ __omap_prcm_write(val, cm_base, module, idx);
+}
+EXPORT_SYMBOL(cm_write_mod_reg);
+
+/* Read-modify-write a register in a CM module. Caller must lock */
+u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
+{
+ u32 v;
+
+ v = cm_read_mod_reg(module, idx);
+ v &= ~mask;
+ v |= bits;
+ cm_write_mod_reg(v, module, idx);
+
+ return v;
+}
+EXPORT_SYMBOL(cm_rmw_mod_reg_bits);
+
+void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
+{
+ prm_base = omap2_globals->prm;
+ cm_base = omap2_globals->cm;
}
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 618f8111658a..bbf41fc8e9a9 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -38,13 +38,29 @@
*
*/
+/* Global 24xx registers in GR_MOD (Same as OCP_MOD for 24xx) */
+#define OMAP24XX_PRCM_VOLTCTRL_OFFSET 0x0050
+#define OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET 0x0080
+
+/* 242x GR_MOD registers, use these only for assembly code */
+#define OMAP242X_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD, \
+ OMAP24XX_PRCM_VOLTCTRL_OFFSET)
+#define OMAP242X_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD, \
+ OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
+
+/* 243x GR_MOD registers, use these only for assembly code */
+#define OMAP243X_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD, \
+ OMAP24XX_PRCM_VOLTCTRL_OFFSET)
+#define OMAP243X_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD, \
+ OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
+
+/* These will disappear */
#define OMAP24XX_PRCM_REVISION OMAP_PRM_REGADDR(OCP_MOD, 0x0000)
#define OMAP24XX_PRCM_SYSCONFIG OMAP_PRM_REGADDR(OCP_MOD, 0x0010)
#define OMAP24XX_PRCM_IRQSTATUS_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
#define OMAP24XX_PRCM_IRQENABLE_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
-#define OMAP24XX_PRCM_VOLTCTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0050)
#define OMAP24XX_PRCM_VOLTST OMAP_PRM_REGADDR(OCP_MOD, 0x0054)
#define OMAP24XX_PRCM_CLKSRC_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0060)
#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0070)
@@ -150,15 +166,19 @@
#ifndef __ASSEMBLER__
/* Power/reset management domain register get/set */
+extern u32 prm_read_mod_reg(s16 module, u16 idx);
+extern void prm_write_mod_reg(u32 val, s16 module, u16 idx);
+extern u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
-static inline void prm_write_mod_reg(u32 val, s16 module, s16 idx)
+/* Read-modify-write bits in a PRM register (by domain) */
+static inline u32 prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
- __raw_writel(val, OMAP_PRM_REGADDR(module, idx));
+ return prm_rmw_mod_reg_bits(bits, bits, module, idx);
}
-static inline u32 prm_read_mod_reg(s16 module, s16 idx)
+static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
- return __raw_readl(OMAP_PRM_REGADDR(module, idx));
+ return prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
}
#endif
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index d7f23bc9550a..1b1fe4f6e030 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -18,13 +18,11 @@
#include <asm/arch/sdrc.h>
#ifndef __ASSEMBLER__
-extern unsigned long omap2_sdrc_base;
-extern unsigned long omap2_sms_base;
+extern void __iomem *omap2_sdrc_base;
+extern void __iomem *omap2_sms_base;
-#define OMAP_SDRC_REGADDR(reg) \
- (void __iomem *)IO_ADDRESS(omap2_sdrc_base + (reg))
-#define OMAP_SMS_REGADDR(reg) \
- (void __iomem *)IO_ADDRESS(omap2_sms_base + (reg))
+#define OMAP_SDRC_REGADDR(reg) (omap2_sdrc_base + (reg))
+#define OMAP_SMS_REGADDR(reg) (omap2_sms_base + (reg))
/* SDRC global register get/set */
diff --git a/arch/arm/mach-omap2/sram-fn.S b/arch/arm/mach-omap2/sram242x.S
index 4a9e49140716..4c274510f3e9 100644
--- a/arch/arm/mach-omap2/sram-fn.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-omap2/sram-fn.S
+ * linux/arch/arm/mach-omap2/sram242x.S
*
* Omap2 specific functions that need to be run in internal SRAM
*
@@ -27,22 +27,20 @@
#include <asm/arch/io.h>
#include <asm/hardware.h>
-#include "sdrc.h"
#include "prm.h"
#include "cm.h"
-
-#define TIMER_32KSYNCT_CR_V IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+#include "sdrc.h"
.text
-ENTRY(sram_ddr_init)
+ENTRY(omap242x_sram_ddr_init)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
mov r12, r2 @ capture CS1 vs CS0
mov r8, r3 @ capture force parameter
/* frequency shift down */
- ldr r2, cm_clksel2_pll @ get address of dpllout reg
+ ldr r2, omap242x_sdi_cm_clksel2_pll @ get address of dpllout reg
mov r3, #0x1 @ value for 1x operation
str r3, [r2] @ go to L1-freq operation
@@ -51,7 +49,7 @@ ENTRY(sram_ddr_init)
bl voltage_shift @ go drop voltage
/* dll lock mode */
- ldr r11, sdrc_dlla_ctrl @ addr of dlla ctrl
+ ldr r11, omap242x_sdi_sdrc_dlla_ctrl @ addr of dlla ctrl
ldr r10, [r11] @ get current val
cmp r12, #0x1 @ cs1 base (2422 es2.05/1)
addeq r11, r11, #0x8 @ if cs1 base, move to DLLB
@@ -102,7 +100,7 @@ i_dll_delay:
* wait for it to finish, use 32k sync counter, 1tick=31uS.
*/
voltage_shift:
- ldr r4, prcm_voltctrl @ get addr of volt ctrl.
+ ldr r4, omap242x_sdi_prcm_voltctrl @ get addr of volt ctrl.
ldr r5, [r4] @ get value.
ldr r6, prcm_mask_val @ get value of mask
and r5, r5, r6 @ apply mask to clear bits
@@ -112,7 +110,7 @@ voltage_shift:
orr r5, r5, r3 @ build value for force
str r5, [r4] @ Force transition to L1
- ldr r3, timer_32ksynct_cr @ get addr of counter
+ ldr r3, omap242x_sdi_timer_32ksynct_cr @ get addr of counter
ldr r5, [r3] @ get value
add r5, r5, #0x3 @ give it at most 93uS
volt_delay:
@@ -121,32 +119,31 @@ volt_delay:
bhi volt_delay @ not yet->branch
mov pc, lr @ back to caller.
-/* relative load constants */
-cm_clksel2_pll:
+omap242x_sdi_cm_clksel2_pll:
.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
-sdrc_dlla_ctrl:
+omap242x_sdi_sdrc_dlla_ctrl:
.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-prcm_voltctrl:
- .word OMAP2420_PRM_REGADDR(OCP_MOD, 0x50)
+omap242x_sdi_prcm_voltctrl:
+ .word OMAP242X_PRCM_VOLTCTRL
prcm_mask_val:
.word 0xFFFF3FFC
-timer_32ksynct_cr:
- .word TIMER_32KSYNCT_CR_V
-ENTRY(sram_ddr_init_sz)
- .word . - sram_ddr_init
+omap242x_sdi_timer_32ksynct_cr:
+ .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ENTRY(omap242x_sram_ddr_init_sz)
+ .word . - omap242x_sram_ddr_init
/*
* Reprograms memory timings.
* r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
* PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
*/
-ENTRY(sram_reprogram_sdrc)
+ENTRY(omap242x_sram_reprogram_sdrc)
stmfd sp!, {r0 - r10, lr} @ save registers on stack
mov r3, #0x0 @ clear for mrc call
mcr p15, 0, r3, c7, c10, 4 @ memory barrier, finish ARM SDR/DDR
nop
nop
- ldr r6, ddr_sdrc_rfr_ctrl @ get addr of refresh reg
+ ldr r6, omap242x_srs_sdrc_rfr_ctrl @ get addr of refresh reg
ldr r5, [r6] @ get value
mov r5, r5, lsr #8 @ isolate rfr field and drop burst
@@ -160,7 +157,7 @@ ENTRY(sram_reprogram_sdrc)
movne r5, r5, lsl #1 @ mult by 2 if to full
mov r5, r5, lsl #8 @ put rfr field back into place
add r5, r5, #0x1 @ turn on burst of 1
- ldr r4, ddr_cm_clksel2_pll @ get address of out reg
+ ldr r4, omap242x_srs_cm_clksel2_pll @ get address of out reg
ldr r3, [r4] @ get curr value
orr r3, r3, #0x3
bic r3, r3, #0x3 @ clear lower bits
@@ -181,7 +178,7 @@ ENTRY(sram_reprogram_sdrc)
bne freq_out @ leave if SDR, no DLL function
/* With DDR, we need to take care of the DLL for the frequency change */
- ldr r2, ddr_sdrc_dlla_ctrl @ addr of dlla ctrl
+ ldr r2, omap242x_srs_sdrc_dlla_ctrl @ addr of dlla ctrl
str r1, [r2] @ write out new SDRC_DLLA_CTRL
add r2, r2, #0x8 @ addr to SDRC_DLLB_CTRL
str r1, [r2] @ commit to SDRC_DLLB_CTRL
@@ -197,7 +194,7 @@ freq_out:
* wait for it to finish, use 32k sync counter, 1tick=31uS.
*/
voltage_shift_c:
- ldr r10, ddr_prcm_voltctrl @ get addr of volt ctrl
+ ldr r10, omap242x_srs_prcm_voltctrl @ get addr of volt ctrl
ldr r8, [r10] @ get value
ldr r7, ddr_prcm_mask_val @ get value of mask
and r8, r8, r7 @ apply mask to clear bits
@@ -207,7 +204,7 @@ voltage_shift_c:
orr r8, r8, r7 @ build value for force
str r8, [r10] @ Force transition to L1
- ldr r10, ddr_timer_32ksynct @ get addr of counter
+ ldr r10, omap242x_srs_timer_32ksynct @ get addr of counter
ldr r8, [r10] @ get value
add r8, r8, #0x2 @ give it at most 62uS (min 31+)
volt_delay_c:
@@ -216,39 +213,39 @@ volt_delay_c:
bhi volt_delay_c @ not yet->branch
mov pc, lr @ back to caller
-ddr_cm_clksel2_pll:
+omap242x_srs_cm_clksel2_pll:
.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
-ddr_sdrc_dlla_ctrl:
+omap242x_srs_sdrc_dlla_ctrl:
.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-ddr_sdrc_rfr_ctrl:
+omap242x_srs_sdrc_rfr_ctrl:
.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-ddr_prcm_voltctrl:
- .word OMAP2420_PRM_REGADDR(OCP_MOD, 0x50)
+omap242x_srs_prcm_voltctrl:
+ .word OMAP242X_PRCM_VOLTCTRL
ddr_prcm_mask_val:
.word 0xFFFF3FFC
-ddr_timer_32ksynct:
- .word TIMER_32KSYNCT_CR_V
+omap242x_srs_timer_32ksynct:
+ .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
-ENTRY(sram_reprogram_sdrc_sz)
- .word . - sram_reprogram_sdrc
+ENTRY(omap242x_sram_reprogram_sdrc_sz)
+ .word . - omap242x_sram_reprogram_sdrc
/*
* Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
*/
-ENTRY(sram_set_prcm)
+ENTRY(omap242x_sram_set_prcm)
stmfd sp!, {r0-r12, lr} @ regs to stack
adr r4, pbegin @ addr of preload start
adr r8, pend @ addr of preload end
mcrr p15, 1, r8, r4, c12 @ preload into icache
pbegin:
/* move into fast relock bypass */
- ldr r8, pll_ctl @ get addr
+ ldr r8, omap242x_ssp_pll_ctl @ get addr
ldr r5, [r8] @ get val
mvn r6, #0x3 @ clear mask
and r5, r5, r6 @ clear field
orr r7, r5, #0x2 @ fast relock val
str r7, [r8] @ go to fast relock
- ldr r4, pll_stat @ addr of stat
+ ldr r4, omap242x_ssp_pll_stat @ addr of stat
block:
/* wait for bypass */
ldr r8, [r4] @ stat value
@@ -257,10 +254,10 @@ block:
bne block @ loop if not
/* set new dpll dividers _after_ in bypass */
- ldr r4, pll_div @ get addr
+ ldr r4, omap242x_ssp_pll_div @ get addr
str r0, [r4] @ set dpll ctrl val
- ldr r4, set_config @ get addr
+ ldr r4, omap242x_ssp_set_config @ get addr
mov r8, #1 @ valid cfg msk
str r8, [r4] @ make dividers take
@@ -274,8 +271,8 @@ wait_a_bit:
beq pend @ jump over dpll relock
/* relock DPLL with new vals */
- ldr r5, pll_stat @ get addr
- ldr r4, pll_ctl @ get addr
+ ldr r5, omap242x_ssp_pll_stat @ get addr
+ ldr r4, omap242x_ssp_pll_ctl @ get addr
orr r8, r7, #0x3 @ val for lock dpll
str r8, [r4] @ set val
mov r0, #1000 @ dead spin a bit
@@ -289,9 +286,9 @@ wait_lock:
bne wait_lock @ wait if not
pend:
/* update memory timings & briefly lock dll */
- ldr r4, sdrc_rfr @ get addr
+ ldr r4, omap242x_ssp_sdrc_rfr @ get addr
str r1, [r4] @ update refresh timing
- ldr r11, dlla_ctrl @ get addr of DLLA ctrl
+ ldr r11, omap242x_ssp_dlla_ctrl @ get addr of DLLA ctrl
ldr r10, [r11] @ get current val
mvn r9, #0x4 @ mask to get clear bit2
and r10, r10, r9 @ clear bit2 for lock mode
@@ -307,18 +304,18 @@ wait_dll_lock:
nop
ldmfd sp!, {r0-r12, pc} @ restore regs and return
-set_config:
- .word OMAP2420_PRM_REGADDR(OCP_MOD, 0x80)
-pll_ctl:
- .word OMAP2420_CM_REGADDR(PLL_MOD, CM_FCLKEN1)
-pll_stat:
- .word OMAP2420_CM_REGADDR(PLL_MOD, CM_IDLEST1)
-pll_div:
- .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL)
-sdrc_rfr:
+omap242x_ssp_set_config:
+ .word OMAP242X_PRCM_CLKCFG_CTRL
+omap242x_ssp_pll_ctl:
+ .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKEN)
+omap242x_ssp_pll_stat:
+ .word OMAP2420_CM_REGADDR(PLL_MOD, CM_IDLEST)
+omap242x_ssp_pll_div:
+ .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
+omap242x_ssp_sdrc_rfr:
.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-dlla_ctrl:
+omap242x_ssp_dlla_ctrl:
.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-ENTRY(sram_set_prcm_sz)
- .word . - sram_set_prcm
+ENTRY(omap242x_sram_set_prcm_sz)
+ .word . - omap242x_sram_set_prcm
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
new file mode 100644
index 000000000000..a3fa48dc08cd
--- /dev/null
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -0,0 +1,321 @@
+/*
+ * linux/arch/arm/mach-omap2/sram243x.S
+ *
+ * Omap2 specific functions that need to be run in internal SRAM
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/arch/io.h>
+#include <asm/hardware.h>
+
+#include "prm.h"
+#include "cm.h"
+#include "sdrc.h"
+
+ .text
+
+ENTRY(omap243x_sram_ddr_init)
+ stmfd sp!, {r0 - r12, lr} @ save registers on stack
+
+ mov r12, r2 @ capture CS1 vs CS0
+ mov r8, r3 @ capture force parameter
+
+ /* frequency shift down */
+ ldr r2, omap243x_sdi_cm_clksel2_pll @ get address of dpllout reg
+ mov r3, #0x1 @ value for 1x operation
+ str r3, [r2] @ go to L1-freq operation
+
+ /* voltage shift down */
+ mov r9, #0x1 @ set up for L1 voltage call
+ bl voltage_shift @ go drop voltage
+
+ /* dll lock mode */
+ ldr r11, omap243x_sdi_sdrc_dlla_ctrl @ addr of dlla ctrl
+ ldr r10, [r11] @ get current val
+ cmp r12, #0x1 @ cs1 base (2422 es2.05/1)
+ addeq r11, r11, #0x8 @ if cs1 base, move to DLLB
+ mvn r9, #0x4 @ mask to get clear bit2
+ and r10, r10, r9 @ clear bit2 for lock mode.
+ orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos)
+ orr r10, r10, #0x2 @ 90 degree phase for all below 133Mhz
+ str r10, [r11] @ commit to DLLA_CTRL
+ bl i_dll_wait @ wait for dll to lock
+
+ /* get dll value */
+ add r11, r11, #0x4 @ get addr of status reg
+ ldr r10, [r11] @ get locked value
+
+ /* voltage shift up */
+ mov r9, #0x0 @ shift back to L0-voltage
+ bl voltage_shift @ go raise voltage
+
+ /* frequency shift up */
+ mov r3, #0x2 @ value for 2x operation
+ str r3, [r2] @ go to L0-freq operation
+
+ /* reset entry mode for dllctrl */
+ sub r11, r11, #0x4 @ move from status to ctrl
+ cmp r12, #0x1 @ normalize if cs1 based
+ subeq r11, r11, #0x8 @ possibly back to DLLA
+ cmp r8, #0x1 @ if forced unlock exit
+ orreq r1, r1, #0x4 @ make sure exit with unlocked value
+ str r1, [r11] @ restore DLLA_CTRL high value
+ add r11, r11, #0x8 @ move to DLLB_CTRL addr
+ str r1, [r11] @ set value DLLB_CTRL
+ bl i_dll_wait @ wait for possible lock
+
+ /* set up for return, DDR should be good */
+ str r10, [r0] @ write dll_status and return counter
+ ldmfd sp!, {r0 - r12, pc} @ restore regs and return
+
+ /* ensure the DLL has relocked */
+i_dll_wait:
+ mov r4, #0x800 @ delay DLL relock, min 0x400 L3 clocks
+i_dll_delay:
+ subs r4, r4, #0x1
+ bne i_dll_delay
+ mov pc, lr
+
+ /*
+ * shift up or down voltage, use R9 as input to tell level.
+ * wait for it to finish, use 32k sync counter, 1tick=31uS.
+ */
+voltage_shift:
+ ldr r4, omap243x_sdi_prcm_voltctrl @ get addr of volt ctrl.
+ ldr r5, [r4] @ get value.
+ ldr r6, prcm_mask_val @ get value of mask
+ and r5, r5, r6 @ apply mask to clear bits
+ orr r5, r5, r9 @ bulld value for L0/L1-volt operation.
+ str r5, [r4] @ set up for change.
+ mov r3, #0x4000 @ get val for force
+ orr r5, r5, r3 @ build value for force
+ str r5, [r4] @ Force transition to L1
+
+ ldr r3, omap243x_sdi_timer_32ksynct_cr @ get addr of counter
+ ldr r5, [r3] @ get value
+ add r5, r5, #0x3 @ give it at most 93uS
+volt_delay:
+ ldr r7, [r3] @ get timer value
+ cmp r5, r7 @ time up?
+ bhi volt_delay @ not yet->branch
+ mov pc, lr @ back to caller.
+
+omap243x_sdi_cm_clksel2_pll:
+ .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
+omap243x_sdi_sdrc_dlla_ctrl:
+ .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
+omap243x_sdi_prcm_voltctrl:
+ .word OMAP243X_PRCM_VOLTCTRL
+prcm_mask_val:
+ .word 0xFFFF3FFC
+omap243x_sdi_timer_32ksynct_cr:
+ .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ENTRY(omap243x_sram_ddr_init_sz)
+ .word . - omap243x_sram_ddr_init
+
+/*
+ * Reprograms memory timings.
+ * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
+ * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
+ */
+ENTRY(omap243x_sram_reprogram_sdrc)
+ stmfd sp!, {r0 - r10, lr} @ save registers on stack
+ mov r3, #0x0 @ clear for mrc call
+ mcr p15, 0, r3, c7, c10, 4 @ memory barrier, finish ARM SDR/DDR
+ nop
+ nop
+ ldr r6, omap243x_srs_sdrc_rfr_ctrl @ get addr of refresh reg
+ ldr r5, [r6] @ get value
+ mov r5, r5, lsr #8 @ isolate rfr field and drop burst
+
+ cmp r0, #0x1 @ going to half speed?
+ movne r9, #0x0 @ if up set flag up for pre up, hi volt
+
+ blne voltage_shift_c @ adjust voltage
+
+ cmp r0, #0x1 @ going to half speed (post branch link)
+ moveq r5, r5, lsr #1 @ divide by 2 if to half
+ movne r5, r5, lsl #1 @ mult by 2 if to full
+ mov r5, r5, lsl #8 @ put rfr field back into place
+ add r5, r5, #0x1 @ turn on burst of 1
+ ldr r4, omap243x_srs_cm_clksel2_pll @ get address of out reg
+ ldr r3, [r4] @ get curr value
+ orr r3, r3, #0x3
+ bic r3, r3, #0x3 @ clear lower bits
+ orr r3, r3, r0 @ new state value
+ str r3, [r4] @ set new state (pll/x, x=1 or 2)
+ nop
+ nop
+
+ moveq r9, #0x1 @ if speed down, post down, drop volt
+ bleq voltage_shift_c
+
+ mcr p15, 0, r3, c7, c10, 4 @ memory barrier
+ str r5, [r6] @ set new RFR_1 value
+ add r6, r6, #0x30 @ get RFR_2 addr
+ str r5, [r6] @ set RFR_2
+ nop
+ cmp r2, #0x1 @ (SDR or DDR) do we need to adjust DLL
+ bne freq_out @ leave if SDR, no DLL function
+
+ /* With DDR, we need to take care of the DLL for the frequency change */
+ ldr r2, omap243x_srs_sdrc_dlla_ctrl @ addr of dlla ctrl
+ str r1, [r2] @ write out new SDRC_DLLA_CTRL
+ add r2, r2, #0x8 @ addr to SDRC_DLLB_CTRL
+ str r1, [r2] @ commit to SDRC_DLLB_CTRL
+ mov r1, #0x2000 @ wait DLL relock, min 0x400 L3 clocks
+dll_wait:
+ subs r1, r1, #0x1
+ bne dll_wait
+freq_out:
+ ldmfd sp!, {r0 - r10, pc} @ restore regs and return
+
+ /*
+ * shift up or down voltage, use R9 as input to tell level.
+ * wait for it to finish, use 32k sync counter, 1tick=31uS.
+ */
+voltage_shift_c:
+ ldr r10, omap243x_srs_prcm_voltctrl @ get addr of volt ctrl
+ ldr r8, [r10] @ get value
+ ldr r7, ddr_prcm_mask_val @ get value of mask
+ and r8, r8, r7 @ apply mask to clear bits
+ orr r8, r8, r9 @ bulld value for L0/L1-volt operation.
+ str r8, [r10] @ set up for change.
+ mov r7, #0x4000 @ get val for force
+ orr r8, r8, r7 @ build value for force
+ str r8, [r10] @ Force transition to L1
+
+ ldr r10, omap243x_srs_timer_32ksynct @ get addr of counter
+ ldr r8, [r10] @ get value
+ add r8, r8, #0x2 @ give it at most 62uS (min 31+)
+volt_delay_c:
+ ldr r7, [r10] @ get timer value
+ cmp r8, r7 @ time up?
+ bhi volt_delay_c @ not yet->branch
+ mov pc, lr @ back to caller
+
+omap243x_srs_cm_clksel2_pll:
+ .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
+omap243x_srs_sdrc_dlla_ctrl:
+ .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
+omap243x_srs_sdrc_rfr_ctrl:
+ .word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
+omap243x_srs_prcm_voltctrl:
+ .word OMAP243X_PRCM_VOLTCTRL
+ddr_prcm_mask_val:
+ .word 0xFFFF3FFC
+omap243x_srs_timer_32ksynct:
+ .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+
+ENTRY(omap243x_sram_reprogram_sdrc_sz)
+ .word . - omap243x_sram_reprogram_sdrc
+
+/*
+ * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
+ */
+ENTRY(omap243x_sram_set_prcm)
+ stmfd sp!, {r0-r12, lr} @ regs to stack
+ adr r4, pbegin @ addr of preload start
+ adr r8, pend @ addr of preload end
+ mcrr p15, 1, r8, r4, c12 @ preload into icache
+pbegin:
+ /* move into fast relock bypass */
+ ldr r8, omap243x_ssp_pll_ctl @ get addr
+ ldr r5, [r8] @ get val
+ mvn r6, #0x3 @ clear mask
+ and r5, r5, r6 @ clear field
+ orr r7, r5, #0x2 @ fast relock val
+ str r7, [r8] @ go to fast relock
+ ldr r4, omap243x_ssp_pll_stat @ addr of stat
+block:
+ /* wait for bypass */
+ ldr r8, [r4] @ stat value
+ and r8, r8, #0x3 @ mask for stat
+ cmp r8, #0x1 @ there yet
+ bne block @ loop if not
+
+ /* set new dpll dividers _after_ in bypass */
+ ldr r4, omap243x_ssp_pll_div @ get addr
+ str r0, [r4] @ set dpll ctrl val
+
+ ldr r4, omap243x_ssp_set_config @ get addr
+ mov r8, #1 @ valid cfg msk
+ str r8, [r4] @ make dividers take
+
+ mov r4, #100 @ dead spin a bit
+wait_a_bit:
+ subs r4, r4, #1 @ dec loop
+ bne wait_a_bit @ delay done?
+
+ /* check if staying in bypass */
+ cmp r2, #0x1 @ stay in bypass?
+ beq pend @ jump over dpll relock
+
+ /* relock DPLL with new vals */
+ ldr r5, omap243x_ssp_pll_stat @ get addr
+ ldr r4, omap243x_ssp_pll_ctl @ get addr
+ orr r8, r7, #0x3 @ val for lock dpll
+ str r8, [r4] @ set val
+ mov r0, #1000 @ dead spin a bit
+wait_more:
+ subs r0, r0, #1 @ dec loop
+ bne wait_more @ delay done?
+wait_lock:
+ ldr r8, [r5] @ get lock val
+ and r8, r8, #3 @ isolate field
+ cmp r8, #2 @ locked?
+ bne wait_lock @ wait if not
+pend:
+ /* update memory timings & briefly lock dll */
+ ldr r4, omap243x_ssp_sdrc_rfr @ get addr
+ str r1, [r4] @ update refresh timing
+ ldr r11, omap243x_ssp_dlla_ctrl @ get addr of DLLA ctrl
+ ldr r10, [r11] @ get current val
+ mvn r9, #0x4 @ mask to get clear bit2
+ and r10, r10, r9 @ clear bit2 for lock mode
+ orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos)
+ str r10, [r11] @ commit to DLLA_CTRL
+ add r11, r11, #0x8 @ move to dllb
+ str r10, [r11] @ hit DLLB also
+
+ mov r4, #0x800 @ relock time (min 0x400 L3 clocks)
+wait_dll_lock:
+ subs r4, r4, #0x1
+ bne wait_dll_lock
+ nop
+ ldmfd sp!, {r0-r12, pc} @ restore regs and return
+
+omap243x_ssp_set_config:
+ .word OMAP243X_PRCM_CLKCFG_CTRL
+omap243x_ssp_pll_ctl:
+ .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKEN)
+omap243x_ssp_pll_stat:
+ .word OMAP2430_CM_REGADDR(PLL_MOD, CM_IDLEST)
+omap243x_ssp_pll_div:
+ .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
+omap243x_ssp_sdrc_rfr:
+ .word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
+omap243x_ssp_dlla_ctrl:
+ .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
+
+ENTRY(omap243x_sram_set_prcm_sz)
+ .word . - omap243x_sram_set_prcm
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 78d05f203fff..557603f99313 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -59,8 +59,7 @@ static struct irqaction omap2_gp_timer_irq = {
static int omap2_gp_timer_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
- omap_dm_timer_set_load(gptimer, 0, 0xffffffff - cycles);
- omap_dm_timer_start(gptimer);
+ omap_dm_timer_set_load_start(gptimer, 0, 0xffffffff - cycles);
return 0;
}
@@ -77,8 +76,7 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
period -= 1;
- omap_dm_timer_set_load(gptimer, 1, 0xffffffff - period);
- omap_dm_timer_start(gptimer);
+ omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period);
break;
case CLOCK_EVT_MODE_ONESHOT:
break;
@@ -172,8 +170,7 @@ static void __init omap2_gp_clocksource_init(void)
tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gpt));
tick_period = (tick_rate / HZ) - 1;
- omap_dm_timer_set_load(gpt, 1, 0);
- omap_dm_timer_start(gpt);
+ omap_dm_timer_set_load_start(gpt, 1, 0);
clocksource_gpt.mult =
clocksource_khz2mult(tick_rate/1000, clocksource_gpt.shift);
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 93debf336155..ddcd41b15d17 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -44,6 +44,54 @@ config MACH_LINKSTATION_PRO
Buffalo Linkstation Pro/Live platform. Both v1 and
v2 devices are supported.
+config MACH_TS409
+ bool "QNAP TS-409"
+ help
+ Say 'Y' here if you want your kernel to support the
+ QNAP TS-409 platform.
+
+config MACH_WRT350N_V2
+ bool "Linksys WRT350N v2"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Linksys WRT350N v2 platform.
+
+config MACH_TS78XX
+ bool "Technologic Systems TS-78xx"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Technologic Systems TS-78xx platform.
+
+config MACH_MV2120
+ bool "HP Media Vault mv2120"
+ help
+ Say 'Y' here if you want your kernel to support the
+ HP Media Vault mv2120 or mv5100.
+
+config MACH_MSS2
+ bool "Maxtor Shared Storage II"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Maxtor Shared Storage II platform.
+
+config MACH_WNR854T
+ bool "Netgear WNR854T"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Netgear WNR854T platform.
+
+config MACH_RD88F5181L_GE
+ bool "Marvell Orion-VoIP GE Reference Design"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell Orion-VoIP GE (88F5181L) RD.
+
+config MACH_RD88F5181L_FXO
+ bool "Marvell Orion-VoIP FXO Reference Design"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell Orion-VoIP FXO (88F5181L) RD.
+
endmenu
endif
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 9301bf55910b..fcc48a8864f3 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -1,7 +1,15 @@
-obj-y += common.o addr-map.o pci.o gpio.o irq.o
+obj-y += common.o addr-map.o pci.o gpio.o irq.o mpp.o
obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o
obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o
obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o
obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
obj-$(CONFIG_MACH_DNS323) += dns323-setup.o
-obj-$(CONFIG_MACH_TS209) += ts209-setup.o
+obj-$(CONFIG_MACH_TS209) += ts209-setup.o tsx09-common.o
+obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o
+obj-$(CONFIG_MACH_WRT350N_V2) += wrt350n-v2-setup.o
+obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o
+obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o
+obj-$(CONFIG_MACH_MSS2) += mss2-setup.o
+obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o
+obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o
+obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index e63fb05dc893..6f0dbda6c44c 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -70,6 +70,7 @@
struct mbus_dram_target_info orion5x_mbus_dram_info;
+static int __initdata win_alloc_count;
static int __init orion5x_cpu_win_can_remap(int win)
{
@@ -87,16 +88,22 @@ static int __init orion5x_cpu_win_can_remap(int win)
static void __init setup_cpu_win(int win, u32 base, u32 size,
u8 target, u8 attr, int remap)
{
- orion5x_write(CPU_WIN_BASE(win), base & 0xffff0000);
- orion5x_write(CPU_WIN_CTRL(win),
- ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1);
+ if (win >= 8) {
+ printk(KERN_ERR "setup_cpu_win: trying to allocate "
+ "window %d\n", win);
+ return;
+ }
+
+ writel(base & 0xffff0000, CPU_WIN_BASE(win));
+ writel(((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1,
+ CPU_WIN_CTRL(win));
if (orion5x_cpu_win_can_remap(win)) {
if (remap < 0)
remap = base;
- orion5x_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000);
- orion5x_write(CPU_WIN_REMAP_HI(win), 0);
+ writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win));
+ writel(0, CPU_WIN_REMAP_HI(win));
}
}
@@ -109,11 +116,11 @@ void __init orion5x_setup_cpu_mbus_bridge(void)
* First, disable and clear windows.
*/
for (i = 0; i < 8; i++) {
- orion5x_write(CPU_WIN_BASE(i), 0);
- orion5x_write(CPU_WIN_CTRL(i), 0);
+ writel(0, CPU_WIN_BASE(i));
+ writel(0, CPU_WIN_CTRL(i));
if (orion5x_cpu_win_can_remap(i)) {
- orion5x_write(CPU_WIN_REMAP_LO(i), 0);
- orion5x_write(CPU_WIN_REMAP_HI(i), 0);
+ writel(0, CPU_WIN_REMAP_LO(i));
+ writel(0, CPU_WIN_REMAP_HI(i));
}
}
@@ -128,6 +135,7 @@ void __init orion5x_setup_cpu_mbus_bridge(void)
TARGET_PCIE, ATTR_PCIE_MEM, -1);
setup_cpu_win(3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE,
TARGET_PCI, ATTR_PCI_MEM, -1);
+ win_alloc_count = 4;
/*
* Setup MBUS dram target info.
@@ -147,8 +155,8 @@ void __init orion5x_setup_cpu_mbus_bridge(void)
w = &orion5x_mbus_dram_info.cs[cs++];
w->cs_index = i;
w->mbus_attr = 0xf & ~(1 << i);
- w->base = base & 0xff000000;
- w->size = (size | 0x00ffffff) + 1;
+ w->base = base & 0xffff0000;
+ w->size = (size | 0x0000ffff) + 1;
}
}
orion5x_mbus_dram_info.num_cs = cs;
@@ -156,25 +164,30 @@ void __init orion5x_setup_cpu_mbus_bridge(void)
void __init orion5x_setup_dev_boot_win(u32 base, u32 size)
{
- setup_cpu_win(4, base, size, TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
+ setup_cpu_win(win_alloc_count++, base, size,
+ TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
}
void __init orion5x_setup_dev0_win(u32 base, u32 size)
{
- setup_cpu_win(5, base, size, TARGET_DEV_BUS, ATTR_DEV_CS0, -1);
+ setup_cpu_win(win_alloc_count++, base, size,
+ TARGET_DEV_BUS, ATTR_DEV_CS0, -1);
}
void __init orion5x_setup_dev1_win(u32 base, u32 size)
{
- setup_cpu_win(6, base, size, TARGET_DEV_BUS, ATTR_DEV_CS1, -1);
+ setup_cpu_win(win_alloc_count++, base, size,
+ TARGET_DEV_BUS, ATTR_DEV_CS1, -1);
}
void __init orion5x_setup_dev2_win(u32 base, u32 size)
{
- setup_cpu_win(7, base, size, TARGET_DEV_BUS, ATTR_DEV_CS2, -1);
+ setup_cpu_win(win_alloc_count++, base, size,
+ TARGET_DEV_BUS, ATTR_DEV_CS2, -1);
}
void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
{
- setup_cpu_win(7, base, size, TARGET_PCIE, ATTR_PCIE_WA, -1);
+ setup_cpu_win(win_alloc_count++, base, size,
+ TARGET_PCIE, ATTR_PCIE_WA, -1);
}
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 4f13fd037f04..faf4e3211918 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -39,25 +39,22 @@ static struct map_desc orion5x_io_desc[] __initdata = {
.virtual = ORION5X_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(ORION5X_REGS_PHYS_BASE),
.length = ORION5X_REGS_SIZE,
- .type = MT_DEVICE
- },
- {
+ .type = MT_DEVICE,
+ }, {
.virtual = ORION5X_PCIE_IO_VIRT_BASE,
.pfn = __phys_to_pfn(ORION5X_PCIE_IO_PHYS_BASE),
.length = ORION5X_PCIE_IO_SIZE,
- .type = MT_DEVICE
- },
- {
+ .type = MT_DEVICE,
+ }, {
.virtual = ORION5X_PCI_IO_VIRT_BASE,
.pfn = __phys_to_pfn(ORION5X_PCI_IO_PHYS_BASE),
.length = ORION5X_PCI_IO_SIZE,
- .type = MT_DEVICE
- },
- {
+ .type = MT_DEVICE,
+ }, {
.virtual = ORION5X_PCIE_WA_VIRT_BASE,
.pfn = __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE),
.length = ORION5X_PCIE_WA_SIZE,
- .type = MT_DEVICE
+ .type = MT_DEVICE,
},
};
@@ -66,101 +63,32 @@ void __init orion5x_map_io(void)
iotable_init(orion5x_io_desc, ARRAY_SIZE(orion5x_io_desc));
}
+
/*****************************************************************************
- * UART
+ * EHCI
****************************************************************************/
-
-static struct resource orion5x_uart_resources[] = {
- {
- .start = UART0_PHYS_BASE,
- .end = UART0_PHYS_BASE + 0xff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_ORION5X_UART0,
- .end = IRQ_ORION5X_UART0,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = UART1_PHYS_BASE,
- .end = UART1_PHYS_BASE + 0xff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_ORION5X_UART1,
- .end = IRQ_ORION5X_UART1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct plat_serial8250_port orion5x_uart_data[] = {
- {
- .mapbase = UART0_PHYS_BASE,
- .membase = (char *)UART0_VIRT_BASE,
- .irq = IRQ_ORION5X_UART0,
- .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = ORION5X_TCLK,
- },
- {
- .mapbase = UART1_PHYS_BASE,
- .membase = (char *)UART1_VIRT_BASE,
- .irq = IRQ_ORION5X_UART1,
- .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = ORION5X_TCLK,
- },
- { },
+static struct orion_ehci_data orion5x_ehci_data = {
+ .dram = &orion5x_mbus_dram_info,
};
-static struct platform_device orion5x_uart = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = orion5x_uart_data,
- },
- .resource = orion5x_uart_resources,
- .num_resources = ARRAY_SIZE(orion5x_uart_resources),
-};
+static u64 ehci_dmamask = 0xffffffffUL;
-/*******************************************************************************
- * USB Controller - 2 interfaces
- ******************************************************************************/
+/*****************************************************************************
+ * EHCI0
+ ****************************************************************************/
static struct resource orion5x_ehci0_resources[] = {
{
.start = ORION5X_USB0_PHYS_BASE,
.end = ORION5X_USB0_PHYS_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
- },
- {
+ }, {
.start = IRQ_ORION5X_USB0_CTRL,
.end = IRQ_ORION5X_USB0_CTRL,
.flags = IORESOURCE_IRQ,
},
};
-static struct resource orion5x_ehci1_resources[] = {
- {
- .start = ORION5X_USB1_PHYS_BASE,
- .end = ORION5X_USB1_PHYS_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_ORION5X_USB1_CTRL,
- .end = IRQ_ORION5X_USB1_CTRL,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct orion_ehci_data orion5x_ehci_data = {
- .dram = &orion5x_mbus_dram_info,
-};
-
-static u64 ehci_dmamask = 0xffffffffUL;
-
static struct platform_device orion5x_ehci0 = {
.name = "orion-ehci",
.id = 0,
@@ -173,6 +101,27 @@ static struct platform_device orion5x_ehci0 = {
.num_resources = ARRAY_SIZE(orion5x_ehci0_resources),
};
+void __init orion5x_ehci0_init(void)
+{
+ platform_device_register(&orion5x_ehci0);
+}
+
+
+/*****************************************************************************
+ * EHCI1
+ ****************************************************************************/
+static struct resource orion5x_ehci1_resources[] = {
+ {
+ .start = ORION5X_USB1_PHYS_BASE,
+ .end = ORION5X_USB1_PHYS_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_ORION5X_USB1_CTRL,
+ .end = IRQ_ORION5X_USB1_CTRL,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static struct platform_device orion5x_ehci1 = {
.name = "orion-ehci",
.id = 1,
@@ -185,11 +134,15 @@ static struct platform_device orion5x_ehci1 = {
.num_resources = ARRAY_SIZE(orion5x_ehci1_resources),
};
+void __init orion5x_ehci1_init(void)
+{
+ platform_device_register(&orion5x_ehci1);
+}
+
+
/*****************************************************************************
- * Gigabit Ethernet port
- * (The Orion and Discovery (MV643xx) families use the same Ethernet driver)
+ * GigE
****************************************************************************/
-
struct mv643xx_eth_shared_platform_data orion5x_eth_shared_data = {
.dram = &orion5x_mbus_dram_info,
.t_clk = ORION5X_TCLK,
@@ -219,7 +172,7 @@ static struct resource orion5x_eth_resources[] = {
.start = IRQ_ORION5X_ETH_SUM,
.end = IRQ_ORION5X_ETH_SUM,
.flags = IORESOURCE_IRQ,
- }
+ },
};
static struct platform_device orion5x_eth = {
@@ -238,11 +191,10 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
platform_device_register(&orion5x_eth);
}
+
/*****************************************************************************
- * I2C controller
- * (The Orion and Discovery (MV643xx) families share the same I2C controller)
+ * I2C
****************************************************************************/
-
static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = {
.freq_m = 8, /* assumes 166 MHz TCLK */
.freq_n = 3,
@@ -251,16 +203,15 @@ static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = {
static struct resource orion5x_i2c_resources[] = {
{
- .name = "i2c base",
- .start = I2C_PHYS_BASE,
- .end = I2C_PHYS_BASE + 0x20 -1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "i2c irq",
- .start = IRQ_ORION5X_I2C,
- .end = IRQ_ORION5X_I2C,
- .flags = IORESOURCE_IRQ,
+ .name = "i2c base",
+ .start = I2C_PHYS_BASE,
+ .end = I2C_PHYS_BASE + 0x1f,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "i2c irq",
+ .start = IRQ_ORION5X_I2C,
+ .end = IRQ_ORION5X_I2C,
+ .flags = IORESOURCE_IRQ,
},
};
@@ -270,36 +221,41 @@ static struct platform_device orion5x_i2c = {
.num_resources = ARRAY_SIZE(orion5x_i2c_resources),
.resource = orion5x_i2c_resources,
.dev = {
- .platform_data = &orion5x_i2c_pdata,
+ .platform_data = &orion5x_i2c_pdata,
},
};
+void __init orion5x_i2c_init(void)
+{
+ platform_device_register(&orion5x_i2c);
+}
+
+
/*****************************************************************************
- * Sata port
+ * SATA
****************************************************************************/
static struct resource orion5x_sata_resources[] = {
- {
- .name = "sata base",
- .start = ORION5X_SATA_PHYS_BASE,
- .end = ORION5X_SATA_PHYS_BASE + 0x5000 - 1,
- .flags = IORESOURCE_MEM,
- },
{
- .name = "sata irq",
- .start = IRQ_ORION5X_SATA,
- .end = IRQ_ORION5X_SATA,
- .flags = IORESOURCE_IRQ,
- },
+ .name = "sata base",
+ .start = ORION5X_SATA_PHYS_BASE,
+ .end = ORION5X_SATA_PHYS_BASE + 0x5000 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "sata irq",
+ .start = IRQ_ORION5X_SATA,
+ .end = IRQ_ORION5X_SATA,
+ .flags = IORESOURCE_IRQ,
+ },
};
static struct platform_device orion5x_sata = {
- .name = "sata_mv",
- .id = 0,
+ .name = "sata_mv",
+ .id = 0,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
- .num_resources = ARRAY_SIZE(orion5x_sata_resources),
- .resource = orion5x_sata_resources,
+ .num_resources = ARRAY_SIZE(orion5x_sata_resources),
+ .resource = orion5x_sata_resources,
};
void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data)
@@ -309,23 +265,111 @@ void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data)
platform_device_register(&orion5x_sata);
}
+
/*****************************************************************************
- * Time handling
+ * UART0
+ ****************************************************************************/
+static struct plat_serial8250_port orion5x_uart0_data[] = {
+ {
+ .mapbase = UART0_PHYS_BASE,
+ .membase = (char *)UART0_VIRT_BASE,
+ .irq = IRQ_ORION5X_UART0,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = ORION5X_TCLK,
+ }, {
+ },
+};
+
+static struct resource orion5x_uart0_resources[] = {
+ {
+ .start = UART0_PHYS_BASE,
+ .end = UART0_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_ORION5X_UART0,
+ .end = IRQ_ORION5X_UART0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device orion5x_uart0 = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = orion5x_uart0_data,
+ },
+ .resource = orion5x_uart0_resources,
+ .num_resources = ARRAY_SIZE(orion5x_uart0_resources),
+};
+
+void __init orion5x_uart0_init(void)
+{
+ platform_device_register(&orion5x_uart0);
+}
+
+
+/*****************************************************************************
+ * UART1
****************************************************************************/
+static struct plat_serial8250_port orion5x_uart1_data[] = {
+ {
+ .mapbase = UART1_PHYS_BASE,
+ .membase = (char *)UART1_VIRT_BASE,
+ .irq = IRQ_ORION5X_UART1,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = ORION5X_TCLK,
+ }, {
+ },
+};
+
+static struct resource orion5x_uart1_resources[] = {
+ {
+ .start = UART1_PHYS_BASE,
+ .end = UART1_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_ORION5X_UART1,
+ .end = IRQ_ORION5X_UART1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device orion5x_uart1 = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = orion5x_uart1_data,
+ },
+ .resource = orion5x_uart1_resources,
+ .num_resources = ARRAY_SIZE(orion5x_uart1_resources),
+};
+
+void __init orion5x_uart1_init(void)
+{
+ platform_device_register(&orion5x_uart1);
+}
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
static void orion5x_timer_init(void)
{
orion_time_init(IRQ_ORION5X_BRIDGE, ORION5X_TCLK);
}
struct sys_timer orion5x_timer = {
- .init = orion5x_timer_init,
+ .init = orion5x_timer_init,
};
+
/*****************************************************************************
* General
****************************************************************************/
-
/*
* Identify device ID and rev from PCIe configuration header space '0'.
*/
@@ -350,8 +394,10 @@ static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name)
} else if (*dev == MV88F5181_DEV_ID) {
if (*rev == MV88F5181_REV_B1) {
*dev_name = "MV88F5181-Rev-B1";
+ } else if (*rev == MV88F5181L_REV_A1) {
+ *dev_name = "MV88F5181L-Rev-A1";
} else {
- *dev_name = "MV88F5181-Rev-Unsupported";
+ *dev_name = "MV88F5181(L)-Rev-Unsupported";
}
} else {
*dev_name = "Device-Unknown";
@@ -370,15 +416,6 @@ void __init orion5x_init(void)
* Setup Orion address map
*/
orion5x_setup_cpu_mbus_bridge();
-
- /*
- * Register devices.
- */
- platform_device_register(&orion5x_uart);
- platform_device_register(&orion5x_ehci0);
- if (dev == MV88F5182_DEV_ID)
- platform_device_register(&orion5x_ehci1);
- platform_device_register(&orion5x_i2c);
}
/*
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index bd0f05de6e18..f72cf0e77544 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -1,10 +1,12 @@
#ifndef __ARCH_ORION5X_COMMON_H
#define __ARCH_ORION5X_COMMON_H
+struct mv643xx_eth_platform_data;
+struct mv_sata_platform_data;
+
/*
* Basic Orion init functions used early by machine-setup.
*/
-
void orion5x_map_io(void);
void orion5x_init_irq(void);
void orion5x_init(void);
@@ -23,15 +25,22 @@ void orion5x_setup_dev1_win(u32 base, u32 size);
void orion5x_setup_dev2_win(u32 base, u32 size);
void orion5x_setup_pcie_wa_win(u32 base, u32 size);
+void orion5x_ehci0_init(void);
+void orion5x_ehci1_init(void);
+void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
+void orion5x_i2c_init(void);
+void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
+void orion5x_uart0_init(void);
+void orion5x_uart1_init(void);
+
/*
- * Shared code used internally by other Orion core functions.
- * (/mach-orion/pci.c)
+ * PCIe/PCI functions.
*/
-
-struct pci_sys_data;
struct pci_bus;
+struct pci_sys_data;
void orion5x_pcie_id(u32 *dev, u32 *rev);
+void orion5x_pci_set_cardbus_mode(void);
int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
int orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
@@ -40,26 +49,9 @@ int orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
* Valid GPIO pins according to MPP setup, used by machine-setup.
* (/mach-orion/gpio.c).
*/
-
-void orion5x_gpio_set_valid_pins(u32 pins);
+void orion5x_gpio_set_valid(unsigned pin, int valid);
void gpio_display(void); /* debug */
-/*
- * Pull in Orion Ethernet platform_data, used by machine-setup
- */
-
-struct mv643xx_eth_platform_data;
-
-void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
-
-/*
- * Orion Sata platform_data, used by machine-setup
- */
-
-struct mv_sata_platform_data;
-
-void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
-
struct machine_desc;
struct meminfo;
struct tag;
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 44c64342dacb..88405e74e5e3 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -27,6 +27,7 @@
#include <asm/arch/orion5x.h>
#include <asm/plat-orion/orion_nand.h>
#include "common.h"
+#include "mpp.h"
/*****************************************************************************
* DB-88F5281 on board devices
@@ -86,7 +87,7 @@ static struct platform_device db88f5281_boot_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
- .platform_data = &db88f5281_boot_flash_data,
+ .platform_data = &db88f5281_boot_flash_data,
},
.num_resources = 1,
.resource = &db88f5281_boot_flash_resource,
@@ -110,7 +111,7 @@ static struct platform_device db88f5281_nor_flash = {
.name = "physmap-flash",
.id = 1,
.dev = {
- .platform_data = &db88f5281_nor_flash_data,
+ .platform_data = &db88f5281_nor_flash_data,
},
.num_resources = 1,
.resource = &db88f5281_nor_flash_resource,
@@ -125,18 +126,15 @@ static struct mtd_partition db88f5281_nand_parts[] = {
.name = "kernel",
.offset = 0,
.size = SZ_2M,
- },
- {
+ }, {
.name = "root",
.offset = SZ_2M,
.size = (SZ_16M - SZ_2M),
- },
- {
+ }, {
.name = "user",
.offset = SZ_16M,
.size = SZ_8M,
- },
- {
+ }, {
.name = "recovery",
.offset = (SZ_16M + SZ_8M),
.size = SZ_8M,
@@ -288,7 +286,6 @@ subsys_initcall(db88f5281_pci_init);
****************************************************************************/
static struct mv643xx_eth_platform_data db88f5281_eth_data = {
.phy_addr = 8,
- .force_phy_addr = 1,
};
/*****************************************************************************
@@ -301,11 +298,28 @@ static struct i2c_board_info __initdata db88f5281_i2c_rtc = {
/*****************************************************************************
* General Setup
****************************************************************************/
-
-static struct platform_device *db88f5281_devs[] __initdata = {
- &db88f5281_boot_flash,
- &db88f5281_nor_flash,
- &db88f5281_nand_flash,
+static struct orion5x_mpp_mode db88f5281_mpp_modes[] __initdata = {
+ { 0, MPP_GPIO }, /* USB Over Current */
+ { 1, MPP_GPIO }, /* USB Vbat input */
+ { 2, MPP_PCI_ARB }, /* PCI_REQn[2] */
+ { 3, MPP_PCI_ARB }, /* PCI_GNTn[2] */
+ { 4, MPP_PCI_ARB }, /* PCI_REQn[3] */
+ { 5, MPP_PCI_ARB }, /* PCI_GNTn[3] */
+ { 6, MPP_GPIO }, /* JP0, CON17.2 */
+ { 7, MPP_GPIO }, /* JP1, CON17.1 */
+ { 8, MPP_GPIO }, /* JP2, CON11.2 */
+ { 9, MPP_GPIO }, /* JP3, CON11.3 */
+ { 10, MPP_GPIO }, /* RTC int */
+ { 11, MPP_GPIO }, /* Baud Rate Generator */
+ { 12, MPP_GPIO }, /* PCI int 1 */
+ { 13, MPP_GPIO }, /* PCI int 2 */
+ { 14, MPP_NAND }, /* NAND_REn[2] */
+ { 15, MPP_NAND }, /* NAND_WEn[2] */
+ { 16, MPP_UART }, /* UART1_RX */
+ { 17, MPP_UART }, /* UART1_TX */
+ { 18, MPP_UART }, /* UART1_CTSn */
+ { 19, MPP_UART }, /* UART1_RTSn */
+ { -1 },
};
static void __init db88f5281_init(void)
@@ -315,39 +329,31 @@ static void __init db88f5281_init(void)
*/
orion5x_init();
+ orion5x_mpp_conf(db88f5281_mpp_modes);
+ writel(0, MPP_DEV_CTRL); /* DEV_D[31:16] */
+
/*
- * Setup the CPU address decode windows for our on-board devices
+ * Configure peripherals.
*/
+ orion5x_ehci0_init();
+ orion5x_eth_init(&db88f5281_eth_data);
+ orion5x_i2c_init();
+ orion5x_uart0_init();
+ orion5x_uart1_init();
+
orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE,
DB88F5281_NOR_BOOT_SIZE);
+ platform_device_register(&db88f5281_boot_flash);
+
orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE);
- orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
- orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
- /*
- * Setup Multiplexing Pins:
- * MPP0: GPIO (USB Over Current) MPP1: GPIO (USB Vbat input)
- * MPP2: PCI_REQn[2] MPP3: PCI_GNTn[2]
- * MPP4: PCI_REQn[3] MPP5: PCI_GNTn[3]
- * MPP6: GPIO (JP0, CON17.2) MPP7: GPIO (JP1, CON17.1)
- * MPP8: GPIO (JP2, CON11.2) MPP9: GPIO (JP3, CON11.3)
- * MPP10: GPIO (RTC int) MPP11: GPIO (Baud Rate Generator)
- * MPP12: GPIO (PCI int 1) MPP13: GPIO (PCI int 2)
- * MPP14: NAND_REn[2] MPP15: NAND_WEn[2]
- * MPP16: UART1_RX MPP17: UART1_TX
- * MPP18: UART1_CTS MPP19: UART1_RTS
- * MPP-DEV: DEV_D[16:31]
- */
- orion5x_write(MPP_0_7_CTRL, 0x00222203);
- orion5x_write(MPP_8_15_CTRL, 0x44000000);
- orion5x_write(MPP_16_19_CTRL, 0);
- orion5x_write(MPP_DEV_CTRL, 0);
+ orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
+ platform_device_register(&db88f5281_nor_flash);
- orion5x_gpio_set_valid_pins(0x00003fc3);
+ orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
+ platform_device_register(&db88f5281_nand_flash);
- platform_add_devices(db88f5281_devs, ARRAY_SIZE(db88f5281_devs));
i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
- orion5x_eth_init(&db88f5281_eth_data);
}
MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 27ce967ab9e5..3791ca6f001a 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -27,6 +27,7 @@
#include <asm/mach/pci.h>
#include <asm/arch/orion5x.h>
#include "common.h"
+#include "mpp.h"
#define DNS323_GPIO_LED_RIGHT_AMBER 1
#define DNS323_GPIO_LED_LEFT_AMBER 2
@@ -52,8 +53,6 @@ static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
if (irq != -1)
return irq;
- pr_err("%s: requested mapping for unknown device\n", __func__);
-
return -1;
}
@@ -81,7 +80,6 @@ subsys_initcall(dns323_pci_init);
static struct mv643xx_eth_platform_data dns323_eth_data = {
.phy_addr = 8,
- .force_phy_addr = 1,
};
/****************************************************************************
@@ -119,7 +117,7 @@ static struct mtd_partition dns323_partitions[] = {
.name = "u-boot",
.size = 0x00030000,
.offset = 0x007d0000,
- }
+ },
};
static struct physmap_flash_data dns323_nor_flash_data = {
@@ -137,7 +135,9 @@ static struct resource dns323_nor_flash_resource = {
static struct platform_device dns323_nor_flash = {
.name = "physmap-flash",
.id = 0,
- .dev = { .platform_data = &dns323_nor_flash_data, },
+ .dev = {
+ .platform_data = &dns323_nor_flash_data,
+ },
.resource = &dns323_nor_flash_resource,
.num_resources = 1,
};
@@ -170,7 +170,9 @@ static struct gpio_led_platform_data dns323_led_data = {
static struct platform_device dns323_gpio_leds = {
.name = "leds-gpio",
.id = -1,
- .dev = { .platform_data = &dns323_led_data, },
+ .dev = {
+ .platform_data = &dns323_led_data,
+ },
};
/****************************************************************************
@@ -183,35 +185,53 @@ static struct gpio_keys_button dns323_buttons[] = {
.gpio = DNS323_GPIO_KEY_RESET,
.desc = "Reset Button",
.active_low = 1,
- },
- {
+ }, {
.code = KEY_POWER,
.gpio = DNS323_GPIO_KEY_POWER,
.desc = "Power Button",
.active_low = 1,
- }
+ },
};
static struct gpio_keys_platform_data dns323_button_data = {
.buttons = dns323_buttons,
- .nbuttons = ARRAY_SIZE(dns323_buttons),
+ .nbuttons = ARRAY_SIZE(dns323_buttons),
};
static struct platform_device dns323_button_device = {
.name = "gpio-keys",
.id = -1,
.num_resources = 0,
- .dev = { .platform_data = &dns323_button_data, },
+ .dev = {
+ .platform_data = &dns323_button_data,
+ },
};
/****************************************************************************
* General Setup
*/
-
-static struct platform_device *dns323_plat_devices[] __initdata = {
- &dns323_nor_flash,
- &dns323_gpio_leds,
- &dns323_button_device,
+static struct orion5x_mpp_mode dns323_mpp_modes[] __initdata = {
+ { 0, MPP_PCIE_RST_OUTn },
+ { 1, MPP_GPIO }, /* right amber LED (sata ch0) */
+ { 2, MPP_GPIO }, /* left amber LED (sata ch1) */
+ { 3, MPP_UNUSED },
+ { 4, MPP_GPIO }, /* power button LED */
+ { 5, MPP_GPIO }, /* power button LED */
+ { 6, MPP_GPIO }, /* GMT G751-2f overtemp */
+ { 7, MPP_GPIO }, /* M41T80 nIRQ/OUT/SQW */
+ { 8, MPP_GPIO }, /* triggers power off */
+ { 9, MPP_GPIO }, /* power button switch */
+ { 10, MPP_GPIO }, /* reset button switch */
+ { 11, MPP_UNUSED },
+ { 12, MPP_UNUSED },
+ { 13, MPP_UNUSED },
+ { 14, MPP_UNUSED },
+ { 15, MPP_UNUSED },
+ { 16, MPP_UNUSED },
+ { 17, MPP_UNUSED },
+ { 18, MPP_UNUSED },
+ { 19, MPP_UNUSED },
+ { -1 },
};
/*
@@ -225,17 +245,15 @@ static struct platform_device *dns323_plat_devices[] __initdata = {
static struct i2c_board_info __initdata dns323_i2c_devices[] = {
{
I2C_BOARD_INFO("g760a", 0x3e),
- },
#if 0
/* this entry requires the new-style driver model lm75 driver,
* for the meantime "insmod lm75.ko force_lm75=0,0x48" is needed */
- {
+ }, {
I2C_BOARD_INFO("g751", 0x48),
- },
#endif
- {
+ }, {
I2C_BOARD_INFO("m41t80", 0x68),
- }
+ },
};
/* DNS-323 specific power off method */
@@ -250,62 +268,35 @@ static void __init dns323_init(void)
/* Setup basic Orion functions. Need to be called early. */
orion5x_init();
+ orion5x_mpp_conf(dns323_mpp_modes);
+ writel(0, MPP_DEV_CTRL); /* DEV_D[31:16] */
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_eth_init(&dns323_eth_data);
+ orion5x_i2c_init();
+ orion5x_uart0_init();
+
/* setup flash mapping
* CS3 holds a 8 MB Spansion S29GL064M90TFIR4
*/
orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
+ platform_device_register(&dns323_nor_flash);
- /* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIe
- *
- * Open a special address decode windows for the PCIe WA.
- */
- orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
- ORION5X_PCIE_WA_SIZE);
-
- /* set MPP to 0 as D-Link's 2.6.12.6 kernel did */
- orion5x_write(MPP_0_7_CTRL, 0);
- orion5x_write(MPP_8_15_CTRL, 0);
- orion5x_write(MPP_16_19_CTRL, 0);
- orion5x_write(MPP_DEV_CTRL, 0);
-
- /* Define used GPIO pins
-
- GPIO Map:
-
- | 0 | | PEX_RST_OUT (not controlled by GPIO)
- | 1 | Out | right amber LED (= sata ch0 LED) (low-active)
- | 2 | Out | left amber LED (= sata ch1 LED) (low-active)
- | 3 | Out | //unknown//
- | 4 | Out | power button LED (low-active, together with pin #5)
- | 5 | Out | power button LED (low-active, together with pin #4)
- | 6 | In | GMT G751-2f overtemp. shutdown signal (low-active)
- | 7 | In | M41T80 nIRQ/OUT/SQW signal
- | 8 | Out | triggers power off (high-active)
- | 9 | In | power button switch (low-active)
- | 10 | In | reset button switch (low-active)
- | 11 | Out | //unknown//
- | 12 | Out | //unknown//
- | 13 | Out | //unknown//
- | 14 | Out | //unknown//
- | 15 | Out | //unknown//
- */
- orion5x_gpio_set_valid_pins(0x07f6);
-
- /* register dns323 specific power-off method */
- if ((gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0)
- || (gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0))
- pr_err("DNS323: failed to setup power-off GPIO\n");
-
- pm_power_off = dns323_power_off;
+ platform_device_register(&dns323_gpio_leds);
- /* register flash and other platform devices */
- platform_add_devices(dns323_plat_devices,
- ARRAY_SIZE(dns323_plat_devices));
+ platform_device_register(&dns323_button_device);
i2c_register_board_info(0, dns323_i2c_devices,
ARRAY_SIZE(dns323_i2c_devices));
- orion5x_eth_init(&dns323_eth_data);
+ /* register dns323 specific power-off method */
+ if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+ gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
+ pr_err("DNS323: failed to setup power-off GPIO\n");
+ pm_power_off = dns323_power_off;
}
/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
diff --git a/arch/arm/mach-orion5x/gpio.c b/arch/arm/mach-orion5x/gpio.c
index 8108c316c426..d09797990f41 100644
--- a/arch/arm/mach-orion5x/gpio.c
+++ b/arch/arm/mach-orion5x/gpio.c
@@ -24,9 +24,12 @@ static DEFINE_SPINLOCK(gpio_lock);
static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)];
static const char *gpio_label[GPIO_MAX]; /* non null for allocated GPIOs */
-void __init orion5x_gpio_set_valid_pins(u32 pins)
+void __init orion5x_gpio_set_valid(unsigned pin, int valid)
{
- gpio_valid[0] = pins;
+ if (valid)
+ __set_bit(pin, gpio_valid);
+ else
+ __clear_bit(pin, gpio_valid);
}
/*
@@ -93,10 +96,10 @@ int gpio_get_value(unsigned pin)
{
int val, mask = 1 << pin;
- if (orion5x_read(GPIO_IO_CONF) & mask)
- val = orion5x_read(GPIO_DATA_IN) ^ orion5x_read(GPIO_IN_POL);
+ if (readl(GPIO_IO_CONF) & mask)
+ val = readl(GPIO_DATA_IN) ^ readl(GPIO_IN_POL);
else
- val = orion5x_read(GPIO_OUT);
+ val = readl(GPIO_OUT);
return val & mask;
}
@@ -188,39 +191,39 @@ void gpio_display(void)
printk("GPIO, free\n");
} else {
printk("GPIO, used by %s, ", gpio_label[i]);
- if (orion5x_read(GPIO_IO_CONF) & (1 << i)) {
+ if (readl(GPIO_IO_CONF) & (1 << i)) {
printk("input, active %s, level %s, edge %s\n",
- ((orion5x_read(GPIO_IN_POL) >> i) & 1) ? "low" : "high",
- ((orion5x_read(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked",
- ((orion5x_read(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked");
+ ((readl(GPIO_IN_POL) >> i) & 1) ? "low" : "high",
+ ((readl(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked",
+ ((readl(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked");
} else {
- printk("output, val=%d\n", (orion5x_read(GPIO_OUT) >> i) & 1);
+ printk("output, val=%d\n", (readl(GPIO_OUT) >> i) & 1);
}
}
}
printk(KERN_DEBUG "MPP_0_7_CTRL (0x%08x) = 0x%08x\n",
- MPP_0_7_CTRL, orion5x_read(MPP_0_7_CTRL));
+ MPP_0_7_CTRL, readl(MPP_0_7_CTRL));
printk(KERN_DEBUG "MPP_8_15_CTRL (0x%08x) = 0x%08x\n",
- MPP_8_15_CTRL, orion5x_read(MPP_8_15_CTRL));
+ MPP_8_15_CTRL, readl(MPP_8_15_CTRL));
printk(KERN_DEBUG "MPP_16_19_CTRL (0x%08x) = 0x%08x\n",
- MPP_16_19_CTRL, orion5x_read(MPP_16_19_CTRL));
+ MPP_16_19_CTRL, readl(MPP_16_19_CTRL));
printk(KERN_DEBUG "MPP_DEV_CTRL (0x%08x) = 0x%08x\n",
- MPP_DEV_CTRL, orion5x_read(MPP_DEV_CTRL));
+ MPP_DEV_CTRL, readl(MPP_DEV_CTRL));
printk(KERN_DEBUG "GPIO_OUT (0x%08x) = 0x%08x\n",
- GPIO_OUT, orion5x_read(GPIO_OUT));
+ GPIO_OUT, readl(GPIO_OUT));
printk(KERN_DEBUG "GPIO_IO_CONF (0x%08x) = 0x%08x\n",
- GPIO_IO_CONF, orion5x_read(GPIO_IO_CONF));
+ GPIO_IO_CONF, readl(GPIO_IO_CONF));
printk(KERN_DEBUG "GPIO_BLINK_EN (0x%08x) = 0x%08x\n",
- GPIO_BLINK_EN, orion5x_read(GPIO_BLINK_EN));
+ GPIO_BLINK_EN, readl(GPIO_BLINK_EN));
printk(KERN_DEBUG "GPIO_IN_POL (0x%08x) = 0x%08x\n",
- GPIO_IN_POL, orion5x_read(GPIO_IN_POL));
+ GPIO_IN_POL, readl(GPIO_IN_POL));
printk(KERN_DEBUG "GPIO_DATA_IN (0x%08x) = 0x%08x\n",
- GPIO_DATA_IN, orion5x_read(GPIO_DATA_IN));
+ GPIO_DATA_IN, readl(GPIO_DATA_IN));
printk(KERN_DEBUG "GPIO_LEVEL_MASK (0x%08x) = 0x%08x\n",
- GPIO_LEVEL_MASK, orion5x_read(GPIO_LEVEL_MASK));
+ GPIO_LEVEL_MASK, readl(GPIO_LEVEL_MASK));
printk(KERN_DEBUG "GPIO_EDGE_CAUSE (0x%08x) = 0x%08x\n",
- GPIO_EDGE_CAUSE, orion5x_read(GPIO_EDGE_CAUSE));
+ GPIO_EDGE_CAUSE, readl(GPIO_EDGE_CAUSE));
printk(KERN_DEBUG "GPIO_EDGE_MASK (0x%08x) = 0x%08x\n",
- GPIO_EDGE_MASK, orion5x_read(GPIO_EDGE_MASK));
+ GPIO_EDGE_MASK, readl(GPIO_EDGE_MASK));
}
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index dd21f38c5d37..e2a0084ab4a3 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -82,7 +82,7 @@ static int orion5x_gpio_set_irq_type(u32 irq, u32 type)
int pin = irq_to_gpio(irq);
struct irq_desc *desc;
- if ((orion5x_read(GPIO_IO_CONF) & (1 << pin)) == 0) {
+ if ((readl(GPIO_IO_CONF) & (1 << pin)) == 0) {
printk(KERN_ERR "orion5x_gpio_set_irq_type failed "
"(irq %d, pin %d).\n", irq, pin);
return -EINVAL;
@@ -117,7 +117,7 @@ static int orion5x_gpio_set_irq_type(u32 irq, u32 type)
/*
* set initial polarity based on current input level
*/
- if ((orion5x_read(GPIO_IN_POL) ^ orion5x_read(GPIO_DATA_IN))
+ if ((readl(GPIO_IN_POL) ^ readl(GPIO_DATA_IN))
& (1 << pin))
orion5x_setbits(GPIO_IN_POL, (1 << pin)); /* falling */
else
@@ -149,8 +149,8 @@ static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
BUG_ON(irq < IRQ_ORION5X_GPIO_0_7 || irq > IRQ_ORION5X_GPIO_24_31);
offs = (irq - IRQ_ORION5X_GPIO_0_7) * 8;
- cause = (orion5x_read(GPIO_DATA_IN) & orion5x_read(GPIO_LEVEL_MASK)) |
- (orion5x_read(GPIO_EDGE_CAUSE) & orion5x_read(GPIO_EDGE_MASK));
+ cause = (readl(GPIO_DATA_IN) & readl(GPIO_LEVEL_MASK)) |
+ (readl(GPIO_EDGE_CAUSE) & readl(GPIO_EDGE_MASK));
for (pin = offs; pin < offs + 8; pin++) {
if (cause & (1 << pin)) {
@@ -158,9 +158,9 @@ static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
desc = irq_desc + irq;
if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
/* Swap polarity (race with GPIO line) */
- u32 polarity = orion5x_read(GPIO_IN_POL);
+ u32 polarity = readl(GPIO_IN_POL);
polarity ^= 1 << pin;
- orion5x_write(GPIO_IN_POL, polarity);
+ writel(polarity, GPIO_IN_POL);
}
desc_handle_irq(irq, desc);
}
@@ -175,9 +175,9 @@ static void __init orion5x_init_gpio_irq(void)
/*
* Mask and clear GPIO IRQ interrupts
*/
- orion5x_write(GPIO_LEVEL_MASK, 0x0);
- orion5x_write(GPIO_EDGE_MASK, 0x0);
- orion5x_write(GPIO_EDGE_CAUSE, 0x0);
+ writel(0x0, GPIO_LEVEL_MASK);
+ writel(0x0, GPIO_EDGE_MASK);
+ writel(0x0, GPIO_EDGE_CAUSE);
/*
* Register chained level handlers for GPIO IRQs by default.
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index f5074b877b7f..84feac4a1fe2 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -13,10 +13,12 @@
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/irq.h>
+#include <linux/delay.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/nand.h>
#include <linux/mv643xx_eth.h>
#include <linux/i2c.h>
+#include <linux/serial_reg.h>
#include <linux/ata_platform.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
@@ -25,6 +27,7 @@
#include <asm/arch/orion5x.h>
#include <asm/plat-orion/orion_nand.h>
#include "common.h"
+#include "mpp.h"
/*****************************************************************************
* KUROBOX-PRO Info
@@ -53,13 +56,11 @@ static struct mtd_partition kurobox_pro_nand_parts[] = {
.name = "uImage",
.offset = 0,
.size = SZ_4M,
- },
- {
+ }, {
.name = "rootfs",
.offset = SZ_4M,
.size = SZ_64M,
- },
- {
+ }, {
.name = "extra",
.offset = SZ_4M + SZ_64M,
.size = SZ_256M - (SZ_4M + SZ_64M),
@@ -132,8 +133,6 @@ static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
/*
* PCI isn't used on the Kuro
*/
- printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n");
-
return -1;
}
@@ -161,7 +160,6 @@ subsys_initcall(kurobox_pro_pci_init);
static struct mv643xx_eth_platform_data kurobox_pro_eth_data = {
.phy_addr = 8,
- .force_phy_addr = 1,
};
/*****************************************************************************
@@ -175,12 +173,169 @@ static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = {
* SATA
****************************************************************************/
static struct mv_sata_platform_data kurobox_pro_sata_data = {
- .n_ports = 2,
+ .n_ports = 2,
};
/*****************************************************************************
+ * Kurobox Pro specific power off method via UART1-attached microcontroller
+ ****************************************************************************/
+
+#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
+
+static int kurobox_pro_miconread(unsigned char *buf, int count)
+{
+ int i;
+ int timeout;
+
+ for (i = 0; i < count; i++) {
+ timeout = 10;
+
+ while (!(readl(UART1_REG(LSR)) & UART_LSR_DR)) {
+ if (--timeout == 0)
+ break;
+ udelay(1000);
+ }
+
+ if (timeout == 0)
+ break;
+ buf[i] = readl(UART1_REG(RX));
+ }
+
+ /* return read bytes */
+ return i;
+}
+
+static int kurobox_pro_miconwrite(const unsigned char *buf, int count)
+{
+ int i = 0;
+
+ while (count--) {
+ while (!(readl(UART1_REG(LSR)) & UART_LSR_THRE))
+ barrier();
+ writel(buf[i++], UART1_REG(TX));
+ }
+
+ return 0;
+}
+
+static int kurobox_pro_miconsend(const unsigned char *data, int count)
+{
+ int i;
+ unsigned char checksum = 0;
+ unsigned char recv_buf[40];
+ unsigned char send_buf[40];
+ unsigned char correct_ack[3];
+ int retry = 2;
+
+ /* Generate checksum */
+ for (i = 0; i < count; i++)
+ checksum -= data[i];
+
+ do {
+ /* Send data */
+ kurobox_pro_miconwrite(data, count);
+
+ /* send checksum */
+ kurobox_pro_miconwrite(&checksum, 1);
+
+ if (kurobox_pro_miconread(recv_buf, sizeof(recv_buf)) <= 3) {
+ printk(KERN_ERR ">%s: receive failed.\n", __func__);
+
+ /* send preamble to clear the receive buffer */
+ memset(&send_buf, 0xff, sizeof(send_buf));
+ kurobox_pro_miconwrite(send_buf, sizeof(send_buf));
+
+ /* make dummy reads */
+ mdelay(100);
+ kurobox_pro_miconread(recv_buf, sizeof(recv_buf));
+ } else {
+ /* Generate expected ack */
+ correct_ack[0] = 0x01;
+ correct_ack[1] = data[1];
+ correct_ack[2] = 0x00;
+
+ /* checksum Check */
+ if ((recv_buf[0] + recv_buf[1] + recv_buf[2] +
+ recv_buf[3]) & 0xFF) {
+ printk(KERN_ERR ">%s: Checksum Error : "
+ "Received data[%02x, %02x, %02x, %02x]"
+ "\n", __func__, recv_buf[0],
+ recv_buf[1], recv_buf[2], recv_buf[3]);
+ } else {
+ /* Check Received Data */
+ if (correct_ack[0] == recv_buf[0] &&
+ correct_ack[1] == recv_buf[1] &&
+ correct_ack[2] == recv_buf[2]) {
+ /* Interval for next command */
+ mdelay(10);
+
+ /* Receive ACK */
+ return 0;
+ }
+ }
+ /* Received NAK or illegal Data */
+ printk(KERN_ERR ">%s: Error : NAK or Illegal Data "
+ "Received\n", __func__);
+ }
+ } while (retry--);
+
+ /* Interval for next command */
+ mdelay(10);
+
+ return -1;
+}
+
+static void kurobox_pro_power_off(void)
+{
+ const unsigned char watchdogkill[] = {0x01, 0x35, 0x00};
+ const unsigned char shutdownwait[] = {0x00, 0x0c};
+ const unsigned char poweroff[] = {0x00, 0x06};
+ /* 38400 baud divisor */
+ const unsigned divisor = ((ORION5X_TCLK + (8 * 38400)) / (16 * 38400));
+
+ pr_info("%s: triggering power-off...\n", __func__);
+
+ /* hijack uart1 and reset into sane state (38400,8n1,even parity) */
+ writel(0x83, UART1_REG(LCR));
+ writel(divisor & 0xff, UART1_REG(DLL));
+ writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+ writel(0x1b, UART1_REG(LCR));
+ writel(0x00, UART1_REG(IER));
+ writel(0x07, UART1_REG(FCR));
+ writel(0x00, UART1_REG(MCR));
+
+ /* Send the commands to shutdown the Kurobox Pro */
+ kurobox_pro_miconsend(watchdogkill, sizeof(watchdogkill)) ;
+ kurobox_pro_miconsend(shutdownwait, sizeof(shutdownwait)) ;
+ kurobox_pro_miconsend(poweroff, sizeof(poweroff));
+}
+
+/*****************************************************************************
* General Setup
****************************************************************************/
+static struct orion5x_mpp_mode kurobox_pro_mpp_modes[] __initdata = {
+ { 0, MPP_UNUSED },
+ { 1, MPP_UNUSED },
+ { 2, MPP_GPIO }, /* GPIO Micon */
+ { 3, MPP_GPIO }, /* GPIO Rtc */
+ { 4, MPP_UNUSED },
+ { 5, MPP_UNUSED },
+ { 6, MPP_NAND }, /* NAND Flash REn */
+ { 7, MPP_NAND }, /* NAND Flash WEn */
+ { 8, MPP_UNUSED },
+ { 9, MPP_UNUSED },
+ { 10, MPP_UNUSED },
+ { 11, MPP_UNUSED },
+ { 12, MPP_SATA_LED }, /* SATA 0 presence */
+ { 13, MPP_SATA_LED }, /* SATA 1 presence */
+ { 14, MPP_SATA_LED }, /* SATA 0 active */
+ { 15, MPP_SATA_LED }, /* SATA 1 active */
+ { 16, MPP_UART }, /* UART1 RXD */
+ { 17, MPP_UART }, /* UART1 TXD */
+ { 18, MPP_UART }, /* UART1 CTSn */
+ { 19, MPP_UART }, /* UART1 RTSn */
+ { -1 },
+};
static void __init kurobox_pro_init(void)
{
@@ -189,46 +344,33 @@ static void __init kurobox_pro_init(void)
*/
orion5x_init();
- /*
- * Setup the CPU address decode windows for our devices
- */
- orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
- KUROBOX_PRO_NOR_BOOT_SIZE);
- orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE, KUROBOX_PRO_NAND_SIZE);
+ orion5x_mpp_conf(kurobox_pro_mpp_modes);
/*
- * Open a special address decode windows for the PCIe WA.
+ * Configure peripherals.
*/
- orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
- ORION5X_PCIE_WA_SIZE);
-
- /*
- * Setup Multiplexing Pins --
- * MPP[0-1] Not used
- * MPP[2] GPIO Micon
- * MPP[3] GPIO RTC
- * MPP[4-5] Not used
- * MPP[6] Nand Flash REn
- * MPP[7] Nand Flash WEn
- * MPP[8-11] Not used
- * MPP[12] SATA 0 presence Indication
- * MPP[13] SATA 1 presence Indication
- * MPP[14] SATA 0 active Indication
- * MPP[15] SATA 1 active indication
- * MPP[16-19] Not used
- */
- orion5x_write(MPP_0_7_CTRL, 0x44220003);
- orion5x_write(MPP_8_15_CTRL, 0x55550000);
- orion5x_write(MPP_16_19_CTRL, 0x0);
-
- orion5x_gpio_set_valid_pins(0x0000000c);
+ orion5x_ehci0_init();
+ orion5x_ehci1_init();
+ orion5x_eth_init(&kurobox_pro_eth_data);
+ orion5x_i2c_init();
+ orion5x_sata_init(&kurobox_pro_sata_data);
+ orion5x_uart0_init();
+ orion5x_uart1_init();
+ orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
+ KUROBOX_PRO_NOR_BOOT_SIZE);
platform_device_register(&kurobox_pro_nor_flash);
- if (machine_is_kurobox_pro())
+
+ if (machine_is_kurobox_pro()) {
+ orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE,
+ KUROBOX_PRO_NAND_SIZE);
platform_device_register(&kurobox_pro_nand_flash);
+ }
+
i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
- orion5x_eth_init(&kurobox_pro_eth_data);
- orion5x_sata_init(&kurobox_pro_sata_data);
+
+ /* register Kurobox Pro specific power-off method */
+ pm_power_off = kurobox_pro_power_off;
}
#ifdef CONFIG_MACH_KUROBOX_PRO
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
new file mode 100644
index 000000000000..a48cadb01590
--- /dev/null
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -0,0 +1,163 @@
+/*
+ * arch/arm/mach-orion5x/mpp.c
+ *
+ * MPP functions for Marvell Orion 5x SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include "common.h"
+#include "mpp.h"
+
+static int is_5181l(void)
+{
+ u32 dev;
+ u32 rev;
+
+ orion5x_pcie_id(&dev, &rev);
+
+ return !!(dev == MV88F5181_DEV_ID && rev >= MV88F5181L_REV_A0);
+}
+
+static int is_5182(void)
+{
+ u32 dev;
+ u32 rev;
+
+ orion5x_pcie_id(&dev, &rev);
+
+ return !!(dev == MV88F5182_DEV_ID);
+}
+
+static int is_5281(void)
+{
+ u32 dev;
+ u32 rev;
+
+ orion5x_pcie_id(&dev, &rev);
+
+ return !!(dev == MV88F5281_DEV_ID);
+}
+
+static int __init determine_type_encoding(int mpp, enum orion5x_mpp_type type)
+{
+ switch (type) {
+ case MPP_UNUSED:
+ case MPP_GPIO:
+ if (mpp == 0)
+ return 3;
+ if (mpp >= 1 && mpp <= 15)
+ return 0;
+ if (mpp >= 16 && mpp <= 19) {
+ if (is_5182())
+ return 5;
+ if (type == MPP_UNUSED)
+ return 0;
+ }
+ return -1;
+
+ case MPP_PCIE_RST_OUTn:
+ if (mpp == 0)
+ return 0;
+ return -1;
+
+ case MPP_PCI_ARB:
+ if (mpp >= 0 && mpp <= 7)
+ return 2;
+ return -1;
+
+ case MPP_PCI_PMEn:
+ if (mpp == 2)
+ return 3;
+ return -1;
+
+ case MPP_GIGE:
+ if (mpp >= 8 && mpp <= 19)
+ return 1;
+ return -1;
+
+ case MPP_NAND:
+ if (is_5182() || is_5281()) {
+ if (mpp >= 4 && mpp <= 7)
+ return 4;
+ if (mpp >= 12 && mpp <= 17)
+ return 4;
+ }
+ return -1;
+
+ case MPP_PCI_CLK:
+ if (is_5181l() && mpp >= 6 && mpp <= 7)
+ return 5;
+ return -1;
+
+ case MPP_SATA_LED:
+ if (is_5182()) {
+ if (mpp >= 4 && mpp <= 7)
+ return 5;
+ if (mpp >= 12 && mpp <= 15)
+ return 5;
+ }
+ return -1;
+
+ case MPP_UART:
+ if (mpp >= 16 && mpp <= 19)
+ return 0;
+ return -1;
+ }
+
+ printk(KERN_INFO "unknown MPP type %d\n", type);
+
+ return -1;
+}
+
+void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
+{
+ u32 mpp_0_7_ctrl = readl(MPP_0_7_CTRL);
+ u32 mpp_8_15_ctrl = readl(MPP_8_15_CTRL);
+ u32 mpp_16_19_ctrl = readl(MPP_16_19_CTRL);
+
+ while (mode->mpp >= 0) {
+ u32 *reg;
+ int num_type;
+ int shift;
+
+ if (mode->mpp >= 0 && mode->mpp <= 7)
+ reg = &mpp_0_7_ctrl;
+ else if (mode->mpp >= 8 && mode->mpp <= 15)
+ reg = &mpp_8_15_ctrl;
+ else if (mode->mpp >= 16 && mode->mpp <= 19)
+ reg = &mpp_16_19_ctrl;
+ else {
+ printk(KERN_ERR "orion5x_mpp_conf: invalid MPP "
+ "(%d)\n", mode->mpp);
+ continue;
+ }
+
+ num_type = determine_type_encoding(mode->mpp, mode->type);
+ if (num_type < 0) {
+ printk(KERN_ERR "orion5x_mpp_conf: invalid MPP "
+ "combination (%d, %d)\n", mode->mpp,
+ mode->type);
+ continue;
+ }
+
+ shift = (mode->mpp & 7) << 2;
+ *reg &= ~(0xf << shift);
+ *reg |= (num_type & 0xf) << shift;
+
+ orion5x_gpio_set_valid(mode->mpp, !!(mode->type == MPP_GPIO));
+
+ mode++;
+ }
+
+ writel(mpp_0_7_ctrl, MPP_0_7_CTRL);
+ writel(mpp_8_15_ctrl, MPP_8_15_CTRL);
+ writel(mpp_16_19_ctrl, MPP_16_19_CTRL);
+}
diff --git a/arch/arm/mach-orion5x/mpp.h b/arch/arm/mach-orion5x/mpp.h
new file mode 100644
index 000000000000..290e610dc012
--- /dev/null
+++ b/arch/arm/mach-orion5x/mpp.h
@@ -0,0 +1,74 @@
+#ifndef __ARCH_ORION5X_MPP_H
+#define __ARCH_ORION5X_MPP_H
+
+enum orion5x_mpp_type {
+ /*
+ * This MPP is unused.
+ */
+ MPP_UNUSED,
+
+ /*
+ * This MPP pin is used as a generic GPIO pin. Valid for
+ * MPPs 0-15 and device bus data pins 16-31. On 5182, also
+ * valid for MPPs 16-19.
+ */
+ MPP_GPIO,
+
+ /*
+ * This MPP is used as PCIe_RST_OUTn pin. Valid for
+ * MPP 0 only.
+ */
+ MPP_PCIE_RST_OUTn,
+
+ /*
+ * This MPP is used as PCI arbiter pin (REQn/GNTn).
+ * Valid for MPPs 0-7 only.
+ */
+ MPP_PCI_ARB,
+
+ /*
+ * This MPP is used as PCI_PMEn pin. Valid for MPP 2 only.
+ */
+ MPP_PCI_PMEn,
+
+ /*
+ * This MPP is used as GigE half-duplex (COL, CRS) or GMII
+ * (RXERR, CRS, TXERR, TXD[7:4], RXD[7:4]) pin. Valid for
+ * MPPs 8-19 only.
+ */
+ MPP_GIGE,
+
+ /*
+ * This MPP is used as NAND REn/WEn pin. Valid for MPPs
+ * 4-7 and 12-17 only, and only on the 5181l/5182/5281.
+ */
+ MPP_NAND,
+
+ /*
+ * This MPP is used as a PCI clock output pin. Valid for
+ * MPPs 6-7 only, and only on the 5181l.
+ */
+ MPP_PCI_CLK,
+
+ /*
+ * This MPP is used as a SATA presence/activity LED.
+ * Valid for MPPs 4-7 and 12-15 only, and only on the 5182.
+ */
+ MPP_SATA_LED,
+
+ /*
+ * This MPP is used as UART1 RXD/TXD/CTSn/RTSn pin.
+ * Valid for MPPs 16-19 only.
+ */
+ MPP_UART,
+};
+
+struct orion5x_mpp_mode {
+ int mpp;
+ enum orion5x_mpp_type type;
+};
+
+void orion5x_mpp_conf(struct orion5x_mpp_mode *mode);
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
new file mode 100644
index 000000000000..7ce9e407d9d1
--- /dev/null
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -0,0 +1,270 @@
+/*
+ * Maxtor Shared Storage II Board Setup
+ *
+ * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+#define MSS2_NOR_BOOT_BASE 0xff800000
+#define MSS2_NOR_BOOT_SIZE SZ_256K
+
+/*****************************************************************************
+ * Maxtor Shared Storage II Info
+ ****************************************************************************/
+
+/*
+ * Maxtor Shared Storage II hardware :
+ * - Marvell 88F5182-A2 C500
+ * - Marvell 88E1111 Gigabit Ethernet PHY
+ * - RTC M41T81 (@0x68) on I2C bus
+ * - 256KB NOR flash
+ * - 64MB of RAM
+ */
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data mss2_nor_flash_data = {
+ .width = 1,
+};
+
+static struct resource mss2_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = MSS2_NOR_BOOT_BASE,
+ .end = MSS2_NOR_BOOT_BASE + MSS2_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device mss2_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &mss2_nor_flash_data,
+ },
+ .resource = &mss2_nor_flash_resource,
+ .num_resources = 1,
+};
+
+/****************************************************************************
+ * PCI setup
+ ****************************************************************************/
+static int __init mss2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ /*
+ * Check for devices with hard-wired IRQs.
+ */
+ irq = orion5x_pci_map_irq(dev, slot, pin);
+ if (irq != -1)
+ return irq;
+
+ return -1;
+}
+
+static struct hw_pci mss2_pci __initdata = {
+ .nr_controllers = 2,
+ .swizzle = pci_std_swizzle,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = mss2_pci_map_irq,
+};
+
+static int __init mss2_pci_init(void)
+{
+ if (machine_is_mss2())
+ pci_common_init(&mss2_pci);
+
+ return 0;
+}
+subsys_initcall(mss2_pci_init);
+
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data mss2_eth_data = {
+ .phy_addr = 8,
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data mss2_sata_data = {
+ .n_ports = 2,
+};
+
+/*****************************************************************************
+ * GPIO buttons
+ ****************************************************************************/
+
+#define MSS2_GPIO_KEY_RESET 12
+#define MSS2_GPIO_KEY_POWER 11
+
+static struct gpio_keys_button mss2_buttons[] = {
+ {
+ .code = KEY_POWER,
+ .gpio = MSS2_GPIO_KEY_POWER,
+ .desc = "Power",
+ .active_low = 1,
+ }, {
+ .code = KEY_RESTART,
+ .gpio = MSS2_GPIO_KEY_RESET,
+ .desc = "Reset",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data mss2_button_data = {
+ .buttons = mss2_buttons,
+ .nbuttons = ARRAY_SIZE(mss2_buttons),
+};
+
+static struct platform_device mss2_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &mss2_button_data,
+ },
+};
+
+/*****************************************************************************
+ * RTC m41t81 on I2C bus
+ ****************************************************************************/
+
+#define MSS2_GPIO_RTC_IRQ 3
+
+static struct i2c_board_info __initdata mss2_i2c_rtc = {
+ I2C_BOARD_INFO("m41t81", 0x68),
+};
+
+/*****************************************************************************
+ * MSS2 power off method
+ ****************************************************************************/
+/*
+ * On the Maxtor Shared Storage II, the shutdown process is the following :
+ * - Userland modifies U-boot env to tell U-boot to go idle at next boot
+ * - The board reboots
+ * - U-boot starts and go into an idle mode until the user press "power"
+ */
+static void mss2_power_off(void)
+{
+ u32 reg;
+
+ /*
+ * Enable and issue soft reset
+ */
+ reg = readl(CPU_RESET_MASK);
+ reg |= 1 << 2;
+ writel(reg, CPU_RESET_MASK);
+
+ reg = readl(CPU_SOFT_RESET);
+ reg |= 1;
+ writel(reg, CPU_SOFT_RESET);
+}
+
+/****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode mss2_mpp_modes[] __initdata = {
+ { 0, MPP_GPIO }, /* Power LED */
+ { 1, MPP_GPIO }, /* Error LED */
+ { 2, MPP_UNUSED },
+ { 3, MPP_GPIO }, /* RTC interrupt */
+ { 4, MPP_GPIO }, /* HDD ind. (Single/Dual)*/
+ { 5, MPP_GPIO }, /* HD0 5V control */
+ { 6, MPP_GPIO }, /* HD0 12V control */
+ { 7, MPP_GPIO }, /* HD1 5V control */
+ { 8, MPP_GPIO }, /* HD1 12V control */
+ { 9, MPP_UNUSED },
+ { 10, MPP_GPIO }, /* Fan control */
+ { 11, MPP_GPIO }, /* Power button */
+ { 12, MPP_GPIO }, /* Reset button */
+ { 13, MPP_UNUSED },
+ { 14, MPP_SATA_LED }, /* SATA 0 active */
+ { 15, MPP_SATA_LED }, /* SATA 1 active */
+ { 16, MPP_UNUSED },
+ { 17, MPP_UNUSED },
+ { 18, MPP_UNUSED },
+ { 19, MPP_UNUSED },
+ { -1 },
+};
+
+static void __init mss2_init(void)
+{
+ /* Setup basic Orion functions. Need to be called early. */
+ orion5x_init();
+
+ orion5x_mpp_conf(mss2_mpp_modes);
+
+ /*
+ * MPP[20] Unused
+ * MPP[21] PCI clock
+ * MPP[22] USB 0 over current
+ * MPP[23] USB 1 over current
+ */
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_ehci1_init();
+ orion5x_eth_init(&mss2_eth_data);
+ orion5x_i2c_init();
+ orion5x_sata_init(&mss2_sata_data);
+ orion5x_uart0_init();
+
+ orion5x_setup_dev_boot_win(MSS2_NOR_BOOT_BASE, MSS2_NOR_BOOT_SIZE);
+ platform_device_register(&mss2_nor_flash);
+
+ platform_device_register(&mss2_button_device);
+
+ if (gpio_request(MSS2_GPIO_RTC_IRQ, "rtc") == 0) {
+ if (gpio_direction_input(MSS2_GPIO_RTC_IRQ) == 0)
+ mss2_i2c_rtc.irq = gpio_to_irq(MSS2_GPIO_RTC_IRQ);
+ else
+ gpio_free(MSS2_GPIO_RTC_IRQ);
+ }
+ i2c_register_board_info(0, &mss2_i2c_rtc, 1);
+
+ /* register mss2 specific power-off method */
+ pm_power_off = mss2_power_off;
+}
+
+MACHINE_START(MSS2, "Maxtor Shared Storage II")
+ /* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = mss2_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
new file mode 100644
index 000000000000..55f3b0fdef8b
--- /dev/null
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -0,0 +1,239 @@
+/*
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+ * Copyright (C) 2008 Martin Michlmayr <tbm@cyrius.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+#define MV2120_NOR_BOOT_BASE 0xf4000000
+#define MV2120_NOR_BOOT_SIZE SZ_512K
+
+#define MV2120_GPIO_RTC_IRQ 3
+#define MV2120_GPIO_KEY_RESET 17
+#define MV2120_GPIO_KEY_POWER 18
+#define MV2120_GPIO_POWER_OFF 19
+
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+static struct mv643xx_eth_platform_data mv2120_eth_data = {
+ .phy_addr = 8,
+};
+
+static struct mv_sata_platform_data mv2120_sata_data = {
+ .n_ports = 2,
+};
+
+static struct mtd_partition mv2120_partitions[] = {
+ {
+ .name = "firmware",
+ .size = 0x00080000,
+ .offset = 0,
+ },
+};
+
+static struct physmap_flash_data mv2120_nor_flash_data = {
+ .width = 1,
+ .parts = mv2120_partitions,
+ .nr_parts = ARRAY_SIZE(mv2120_partitions)
+};
+
+static struct resource mv2120_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = MV2120_NOR_BOOT_BASE,
+ .end = MV2120_NOR_BOOT_BASE + MV2120_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device mv2120_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &mv2120_nor_flash_data,
+ },
+ .resource = &mv2120_nor_flash_resource,
+ .num_resources = 1,
+};
+
+static struct gpio_keys_button mv2120_buttons[] = {
+ {
+ .code = KEY_RESTART,
+ .gpio = MV2120_GPIO_KEY_RESET,
+ .desc = "reset",
+ .active_low = 1,
+ }, {
+ .code = KEY_POWER,
+ .gpio = MV2120_GPIO_KEY_POWER,
+ .desc = "power",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data mv2120_button_data = {
+ .buttons = mv2120_buttons,
+ .nbuttons = ARRAY_SIZE(mv2120_buttons),
+};
+
+static struct platform_device mv2120_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &mv2120_button_data,
+ },
+};
+
+
+/****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode mv2120_mpp_modes[] __initdata = {
+ { 0, MPP_GPIO }, /* Sys status LED */
+ { 1, MPP_GPIO }, /* Sys error LED */
+ { 2, MPP_GPIO }, /* OverTemp interrupt */
+ { 3, MPP_GPIO }, /* RTC interrupt */
+ { 4, MPP_GPIO }, /* V_LED 5V */
+ { 5, MPP_GPIO }, /* V_LED 3.3V */
+ { 6, MPP_UNUSED },
+ { 7, MPP_UNUSED },
+ { 8, MPP_GPIO }, /* SATA 0 fail LED */
+ { 9, MPP_GPIO }, /* SATA 1 fail LED */
+ { 10, MPP_UNUSED },
+ { 11, MPP_UNUSED },
+ { 12, MPP_SATA_LED }, /* SATA 0 presence */
+ { 13, MPP_SATA_LED }, /* SATA 1 presence */
+ { 14, MPP_SATA_LED }, /* SATA 0 active */
+ { 15, MPP_SATA_LED }, /* SATA 1 active */
+ { 16, MPP_UNUSED },
+ { 17, MPP_GPIO }, /* Reset button */
+ { 18, MPP_GPIO }, /* Power button */
+ { 19, MPP_GPIO }, /* Power off */
+ { -1 },
+};
+
+static struct i2c_board_info __initdata mv2120_i2c_rtc = {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+ .irq = 0,
+};
+
+static struct gpio_led mv2120_led_pins[] = {
+ {
+ .name = "mv2120:blue:health",
+ .gpio = 0,
+ },
+ {
+ .name = "mv2120:red:health",
+ .gpio = 1,
+ },
+ {
+ .name = "mv2120:led:bright",
+ .gpio = 4,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "mv2120:led:dimmed",
+ .gpio = 5,
+ },
+ {
+ .name = "mv2120:red:sata0",
+ .gpio = 8,
+ .active_low = 1,
+ },
+ {
+ .name = "mv2120:red:sata1",
+ .gpio = 9,
+ .active_low = 1,
+ },
+
+};
+
+static struct gpio_led_platform_data mv2120_led_data = {
+ .leds = mv2120_led_pins,
+ .num_leds = ARRAY_SIZE(mv2120_led_pins),
+};
+
+static struct platform_device mv2120_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &mv2120_led_data,
+ }
+};
+
+static void mv2120_power_off(void)
+{
+ pr_info("%s: triggering power-off...\n", __func__);
+ gpio_set_value(MV2120_GPIO_POWER_OFF, 0);
+}
+
+static void __init mv2120_init(void)
+{
+ /* Setup basic Orion functions. Need to be called early. */
+ orion5x_init();
+
+ orion5x_mpp_conf(mv2120_mpp_modes);
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_ehci1_init();
+ orion5x_eth_init(&mv2120_eth_data);
+ orion5x_i2c_init();
+ orion5x_sata_init(&mv2120_sata_data);
+ orion5x_uart0_init();
+
+ orion5x_setup_dev_boot_win(MV2120_NOR_BOOT_BASE, MV2120_NOR_BOOT_SIZE);
+ platform_device_register(&mv2120_nor_flash);
+
+ platform_device_register(&mv2120_button_device);
+
+ if (gpio_request(MV2120_GPIO_RTC_IRQ, "rtc") == 0) {
+ if (gpio_direction_input(MV2120_GPIO_RTC_IRQ) == 0)
+ mv2120_i2c_rtc.irq = gpio_to_irq(MV2120_GPIO_RTC_IRQ);
+ else
+ gpio_free(MV2120_GPIO_RTC_IRQ);
+ }
+ i2c_register_board_info(0, &mv2120_i2c_rtc, 1);
+ platform_device_register(&mv2120_leds);
+
+ /* register mv2120 specific power-off method */
+ if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+ gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0)
+ pr_err("mv2120: failed to setup power-off GPIO\n");
+ pm_power_off = mv2120_power_off;
+}
+
+/* Warning: HP uses a wrong mach-type (=526) in their bootloader */
+MACHINE_START(MV2120, "HP Media Vault mv2120")
+ /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = mv2120_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 9d5d39fa19c3..256a4f680935 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -152,6 +152,8 @@ static int __init pcie_setup(struct pci_sys_data *sys)
if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) {
printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config "
"read transaction workaround\n");
+ orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
+ ORION5X_PCIE_WA_SIZE);
pcie_ops.read = pcie_rd_conf_wa;
}
@@ -240,13 +242,13 @@ static int __init pcie_setup(struct pci_sys_data *sys)
* PCI Address Decode Windows registers
*/
#define PCI_BAR_SIZE_DDR_CS(n) (((n) == 0) ? ORION5X_PCI_REG(0xc08) : \
- ((n) == 1) ? ORION5X_PCI_REG(0xd08) : \
- ((n) == 2) ? ORION5X_PCI_REG(0xc0c) : \
- ((n) == 3) ? ORION5X_PCI_REG(0xd0c) : 0)
-#define PCI_BAR_REMAP_DDR_CS(n) (((n) ==0) ? ORION5X_PCI_REG(0xc48) : \
- ((n) == 1) ? ORION5X_PCI_REG(0xd48) : \
- ((n) == 2) ? ORION5X_PCI_REG(0xc4c) : \
- ((n) == 3) ? ORION5X_PCI_REG(0xd4c) : 0)
+ ((n) == 1) ? ORION5X_PCI_REG(0xd08) : \
+ ((n) == 2) ? ORION5X_PCI_REG(0xc0c) : \
+ ((n) == 3) ? ORION5X_PCI_REG(0xd0c) : 0)
+#define PCI_BAR_REMAP_DDR_CS(n) (((n) == 0) ? ORION5X_PCI_REG(0xc48) : \
+ ((n) == 1) ? ORION5X_PCI_REG(0xd48) : \
+ ((n) == 2) ? ORION5X_PCI_REG(0xc4c) : \
+ ((n) == 3) ? ORION5X_PCI_REG(0xd4c) : 0)
#define PCI_BAR_ENABLE ORION5X_PCI_REG(0xc3c)
#define PCI_ADDR_DECODE_CTRL ORION5X_PCI_REG(0xd3c)
@@ -264,9 +266,11 @@ static int __init pcie_setup(struct pci_sys_data *sys)
*/
static DEFINE_SPINLOCK(orion5x_pci_lock);
+static int orion5x_pci_cardbus_mode;
+
static int orion5x_pci_local_bus_nr(void)
{
- u32 conf = orion5x_read(PCI_P2P_CONF);
+ u32 conf = readl(PCI_P2P_CONF);
return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS);
}
@@ -276,11 +280,11 @@ static int orion5x_pci_hw_rd_conf(int bus, int dev, u32 func,
unsigned long flags;
spin_lock_irqsave(&orion5x_pci_lock, flags);
- orion5x_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) |
- PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
- PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN);
+ writel(PCI_CONF_BUS(bus) |
+ PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
+ PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN, PCI_CONF_ADDR);
- *val = orion5x_read(PCI_CONF_DATA);
+ *val = readl(PCI_CONF_DATA);
if (size == 1)
*val = (*val >> (8*(where & 0x3))) & 0xff;
@@ -300,9 +304,9 @@ static int orion5x_pci_hw_wr_conf(int bus, int dev, u32 func,
spin_lock_irqsave(&orion5x_pci_lock, flags);
- orion5x_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) |
- PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
- PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN);
+ writel(PCI_CONF_BUS(bus) |
+ PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
+ PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN, PCI_CONF_ADDR);
if (size == 4) {
__raw_writel(val, PCI_CONF_DATA);
@@ -319,14 +323,30 @@ static int orion5x_pci_hw_wr_conf(int bus, int dev, u32 func,
return ret;
}
+static int orion5x_pci_valid_config(int bus, u32 devfn)
+{
+ if (bus == orion5x_pci_local_bus_nr()) {
+ /*
+ * Don't go out for local device
+ */
+ if (PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0)
+ return 0;
+
+ /*
+ * When the PCI signals are directly connected to a
+ * Cardbus slot, ignore all but device IDs 0 and 1.
+ */
+ if (orion5x_pci_cardbus_mode && PCI_SLOT(devfn) > 1)
+ return 0;
+ }
+
+ return 1;
+}
+
static int orion5x_pci_rd_conf(struct pci_bus *bus, u32 devfn,
int where, int size, u32 *val)
{
- /*
- * Don't go out for local device
- */
- if (bus->number == orion5x_pci_local_bus_nr() &&
- PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0) {
+ if (!orion5x_pci_valid_config(bus->number, devfn)) {
*val = 0xffffffff;
return PCIBIOS_DEVICE_NOT_FOUND;
}
@@ -338,8 +358,7 @@ static int orion5x_pci_rd_conf(struct pci_bus *bus, u32 devfn,
static int orion5x_pci_wr_conf(struct pci_bus *bus, u32 devfn,
int where, int size, u32 val)
{
- if (bus->number == orion5x_pci_local_bus_nr() &&
- PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0)
+ if (!orion5x_pci_valid_config(bus->number, devfn))
return PCIBIOS_DEVICE_NOT_FOUND;
return orion5x_pci_hw_wr_conf(bus->number, PCI_SLOT(devfn),
@@ -353,9 +372,9 @@ static struct pci_ops pci_ops = {
static void __init orion5x_pci_set_bus_nr(int nr)
{
- u32 p2p = orion5x_read(PCI_P2P_CONF);
+ u32 p2p = readl(PCI_P2P_CONF);
- if (orion5x_read(PCI_MODE) & PCI_MODE_PCIX) {
+ if (readl(PCI_MODE) & PCI_MODE_PCIX) {
/*
* PCI-X mode
*/
@@ -372,7 +391,7 @@ static void __init orion5x_pci_set_bus_nr(int nr)
*/
p2p &= ~PCI_P2P_BUS_MASK;
p2p |= (nr << PCI_P2P_BUS_OFFS);
- orion5x_write(PCI_P2P_CONF, p2p);
+ writel(p2p, PCI_P2P_CONF);
}
}
@@ -399,7 +418,7 @@ static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram)
* First, disable windows.
*/
win_enable = 0xffffffff;
- orion5x_write(PCI_BAR_ENABLE, win_enable);
+ writel(win_enable, PCI_BAR_ENABLE);
/*
* Setup windows for DDR banks.
@@ -425,10 +444,10 @@ static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram)
*/
reg = PCI_CONF_REG_BAR_HI_CS(cs->cs_index);
orion5x_pci_hw_wr_conf(bus, 0, func, reg, 4, 0);
- orion5x_write(PCI_BAR_SIZE_DDR_CS(cs->cs_index),
- (cs->size - 1) & 0xfffff000);
- orion5x_write(PCI_BAR_REMAP_DDR_CS(cs->cs_index),
- cs->base & 0xfffff000);
+ writel((cs->size - 1) & 0xfffff000,
+ PCI_BAR_SIZE_DDR_CS(cs->cs_index));
+ writel(cs->base & 0xfffff000,
+ PCI_BAR_REMAP_DDR_CS(cs->cs_index));
/*
* Enable decode window for this chip select.
@@ -439,7 +458,7 @@ static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram)
/*
* Re-enable decode windows.
*/
- orion5x_write(PCI_BAR_ENABLE, win_enable);
+ writel(win_enable, PCI_BAR_ENABLE);
/*
* Disable automatic update of address remaping when writing to BARs.
@@ -522,6 +541,11 @@ static void __devinit rc_pci_fixup(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+void __init orion5x_pci_set_cardbus_mode(void)
+{
+ orion5x_pci_cardbus_mode = 1;
+}
+
int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys)
{
int ret = 0;
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
new file mode 100644
index 000000000000..d50e3650a09e
--- /dev/null
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -0,0 +1,161 @@
+/*
+ * arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+ *
+ * Marvell Orion-VoIP FXO Reference Design Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/leds.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * RD-88F5181L FXO Info
+ ****************************************************************************/
+/*
+ * 8M NOR flash Device bus boot chip select
+ */
+#define RD88F5181L_FXO_NOR_BOOT_BASE 0xff800000
+#define RD88F5181L_FXO_NOR_BOOT_SIZE SZ_8M
+
+
+/*****************************************************************************
+ * 8M NOR Flash on Device bus Boot chip select
+ ****************************************************************************/
+static struct physmap_flash_data rd88f5181l_fxo_nor_boot_flash_data = {
+ .width = 1,
+};
+
+static struct resource rd88f5181l_fxo_nor_boot_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = RD88F5181L_FXO_NOR_BOOT_BASE,
+ .end = RD88F5181L_FXO_NOR_BOOT_BASE +
+ RD88F5181L_FXO_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device rd88f5181l_fxo_nor_boot_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &rd88f5181l_fxo_nor_boot_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &rd88f5181l_fxo_nor_boot_flash_resource,
+};
+
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode rd88f5181l_fxo_mpp_modes[] __initdata = {
+ { 0, MPP_GPIO }, /* LED1 CardBus LED (front panel) */
+ { 1, MPP_GPIO }, /* PCI_intA */
+ { 2, MPP_GPIO }, /* Hard Reset / Factory Init*/
+ { 3, MPP_GPIO }, /* FXS or DAA select */
+ { 4, MPP_GPIO }, /* LED6 - phone LED (front panel) */
+ { 5, MPP_GPIO }, /* LED5 - phone LED (front panel) */
+ { 6, MPP_PCI_CLK }, /* CPU PCI refclk */
+ { 7, MPP_PCI_CLK }, /* PCI/PCIe refclk */
+ { 8, MPP_GPIO }, /* CardBus reset */
+ { 9, MPP_GPIO }, /* GE_RXERR */
+ { 10, MPP_GPIO }, /* LED2 MiniPCI LED (front panel) */
+ { 11, MPP_GPIO }, /* Lifeline control */
+ { 12, MPP_GIGE }, /* GE_TXD[4] */
+ { 13, MPP_GIGE }, /* GE_TXD[5] */
+ { 14, MPP_GIGE }, /* GE_TXD[6] */
+ { 15, MPP_GIGE }, /* GE_TXD[7] */
+ { 16, MPP_GIGE }, /* GE_RXD[4] */
+ { 17, MPP_GIGE }, /* GE_RXD[5] */
+ { 18, MPP_GIGE }, /* GE_RXD[6] */
+ { 19, MPP_GIGE }, /* GE_RXD[7] */
+ { -1 },
+};
+
+static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
+ .phy_addr = -1,
+};
+
+static void __init rd88f5181l_fxo_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ orion5x_mpp_conf(rd88f5181l_fxo_mpp_modes);
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_eth_init(&rd88f5181l_fxo_eth_data);
+ orion5x_uart0_init();
+
+ orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE,
+ RD88F5181L_FXO_NOR_BOOT_SIZE);
+ platform_device_register(&rd88f5181l_fxo_nor_boot_flash);
+}
+
+static int __init
+rd88f5181l_fxo_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ /*
+ * Check for devices with hard-wired IRQs.
+ */
+ irq = orion5x_pci_map_irq(dev, slot, pin);
+ if (irq != -1)
+ return irq;
+
+ /*
+ * Mini-PCI / Cardbus slot.
+ */
+ return gpio_to_irq(1);
+}
+
+static struct hw_pci rd88f5181l_fxo_pci __initdata = {
+ .nr_controllers = 2,
+ .swizzle = pci_std_swizzle,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = rd88f5181l_fxo_pci_map_irq,
+};
+
+static int __init rd88f5181l_fxo_pci_init(void)
+{
+ if (machine_is_rd88f5181l_fxo()) {
+ orion5x_pci_set_cardbus_mode();
+ pci_common_init(&rd88f5181l_fxo_pci);
+ }
+
+ return 0;
+}
+subsys_initcall(rd88f5181l_fxo_pci_init);
+
+MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
+ /* Maintainer: Nicolas Pitre <nico@marvell.com> */
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = rd88f5181l_fxo_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
new file mode 100644
index 000000000000..b56447d32e17
--- /dev/null
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -0,0 +1,172 @@
+/*
+ * arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+ *
+ * Marvell Orion-VoIP GE Reference Design Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/leds.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * RD-88F5181L GE Info
+ ****************************************************************************/
+/*
+ * 16M NOR flash Device bus boot chip select
+ */
+#define RD88F5181L_GE_NOR_BOOT_BASE 0xff000000
+#define RD88F5181L_GE_NOR_BOOT_SIZE SZ_16M
+
+
+/*****************************************************************************
+ * 16M NOR Flash on Device bus Boot chip select
+ ****************************************************************************/
+static struct physmap_flash_data rd88f5181l_ge_nor_boot_flash_data = {
+ .width = 1,
+};
+
+static struct resource rd88f5181l_ge_nor_boot_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = RD88F5181L_GE_NOR_BOOT_BASE,
+ .end = RD88F5181L_GE_NOR_BOOT_BASE +
+ RD88F5181L_GE_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device rd88f5181l_ge_nor_boot_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &rd88f5181l_ge_nor_boot_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &rd88f5181l_ge_nor_boot_flash_resource,
+};
+
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode rd88f5181l_ge_mpp_modes[] __initdata = {
+ { 0, MPP_GPIO }, /* LED1 */
+ { 1, MPP_GPIO }, /* LED5 */
+ { 2, MPP_GPIO }, /* LED4 */
+ { 3, MPP_GPIO }, /* LED3 */
+ { 4, MPP_GPIO }, /* PCI_intA */
+ { 5, MPP_GPIO }, /* RTC interrupt */
+ { 6, MPP_PCI_CLK }, /* CPU PCI refclk */
+ { 7, MPP_PCI_CLK }, /* PCI/PCIe refclk */
+ { 8, MPP_GPIO }, /* 88e6131 interrupt */
+ { 9, MPP_GPIO }, /* GE_RXERR */
+ { 10, MPP_GPIO }, /* PCI_intB */
+ { 11, MPP_GPIO }, /* LED2 */
+ { 12, MPP_GIGE }, /* GE_TXD[4] */
+ { 13, MPP_GIGE }, /* GE_TXD[5] */
+ { 14, MPP_GIGE }, /* GE_TXD[6] */
+ { 15, MPP_GIGE }, /* GE_TXD[7] */
+ { 16, MPP_GIGE }, /* GE_RXD[4] */
+ { 17, MPP_GIGE }, /* GE_RXD[5] */
+ { 18, MPP_GIGE }, /* GE_RXD[6] */
+ { 19, MPP_GIGE }, /* GE_RXD[7] */
+ { -1 },
+};
+
+static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
+ .phy_addr = -1,
+};
+
+static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
+ I2C_BOARD_INFO("ds1338", 0x68),
+};
+
+static void __init rd88f5181l_ge_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ orion5x_mpp_conf(rd88f5181l_ge_mpp_modes);
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_eth_init(&rd88f5181l_ge_eth_data);
+ orion5x_i2c_init();
+ orion5x_uart0_init();
+
+ orion5x_setup_dev_boot_win(RD88F5181L_GE_NOR_BOOT_BASE,
+ RD88F5181L_GE_NOR_BOOT_SIZE);
+ platform_device_register(&rd88f5181l_ge_nor_boot_flash);
+
+ i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
+}
+
+static int __init
+rd88f5181l_ge_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ /*
+ * Check for devices with hard-wired IRQs.
+ */
+ irq = orion5x_pci_map_irq(dev, slot, pin);
+ if (irq != -1)
+ return irq;
+
+ /*
+ * Cardbus slot.
+ */
+ if (pin == 1)
+ return gpio_to_irq(4);
+ else
+ return gpio_to_irq(10);
+}
+
+static struct hw_pci rd88f5181l_ge_pci __initdata = {
+ .nr_controllers = 2,
+ .swizzle = pci_std_swizzle,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = rd88f5181l_ge_pci_map_irq,
+};
+
+static int __init rd88f5181l_ge_pci_init(void)
+{
+ if (machine_is_rd88f5181l_ge()) {
+ orion5x_pci_set_cardbus_mode();
+ pci_common_init(&rd88f5181l_ge_pci);
+ }
+
+ return 0;
+}
+subsys_initcall(rd88f5181l_ge_pci_init);
+
+MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
+ /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = rd88f5181l_ge_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 81abc1003aae..10ae62864269 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -26,6 +26,7 @@
#include <asm/mach/pci.h>
#include <asm/arch/orion5x.h>
#include "common.h"
+#include "mpp.h"
/*****************************************************************************
* RD-88F5182 Info
@@ -125,6 +126,7 @@ static int __init rd88f5182_dbgled_init(void)
leds_event = rd88f5182_dbgled_event;
}
+
return 0;
}
@@ -220,7 +222,6 @@ subsys_initcall(rd88f5182_pci_init);
static struct mv643xx_eth_platform_data rd88f5182_eth_data = {
.phy_addr = 8,
- .force_phy_addr = 1,
};
/*****************************************************************************
@@ -234,15 +235,34 @@ static struct i2c_board_info __initdata rd88f5182_i2c_rtc = {
* Sata
****************************************************************************/
static struct mv_sata_platform_data rd88f5182_sata_data = {
- .n_ports = 2,
+ .n_ports = 2,
};
/*****************************************************************************
* General Setup
****************************************************************************/
-
-static struct platform_device *rd88f5182_devices[] __initdata = {
- &rd88f5182_nor_flash,
+static struct orion5x_mpp_mode rd88f5182_mpp_modes[] __initdata = {
+ { 0, MPP_GPIO }, /* Debug Led */
+ { 1, MPP_GPIO }, /* Reset Switch */
+ { 2, MPP_UNUSED },
+ { 3, MPP_GPIO }, /* RTC Int */
+ { 4, MPP_GPIO },
+ { 5, MPP_GPIO },
+ { 6, MPP_GPIO }, /* PCI_intA */
+ { 7, MPP_GPIO }, /* PCI_intB */
+ { 8, MPP_UNUSED },
+ { 9, MPP_UNUSED },
+ { 10, MPP_UNUSED },
+ { 11, MPP_UNUSED },
+ { 12, MPP_SATA_LED }, /* SATA 0 presence */
+ { 13, MPP_SATA_LED }, /* SATA 1 presence */
+ { 14, MPP_SATA_LED }, /* SATA 0 active */
+ { 15, MPP_SATA_LED }, /* SATA 1 active */
+ { 16, MPP_UNUSED },
+ { 17, MPP_UNUSED },
+ { 18, MPP_UNUSED },
+ { 19, MPP_UNUSED },
+ { -1 },
};
static void __init rd88f5182_init(void)
@@ -252,35 +272,9 @@ static void __init rd88f5182_init(void)
*/
orion5x_init();
- /*
- * Setup the CPU address decode windows for our devices
- */
- orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
- RD88F5182_NOR_BOOT_SIZE);
- orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
-
- /*
- * Open a special address decode windows for the PCIe WA.
- */
- orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
- ORION5X_PCIE_WA_SIZE);
+ orion5x_mpp_conf(rd88f5182_mpp_modes);
/*
- * Setup Multiplexing Pins --
- * MPP[0] Debug Led (GPIO - Out)
- * MPP[1] Debug Led (GPIO - Out)
- * MPP[2] N/A
- * MPP[3] RTC_Int (GPIO - In)
- * MPP[4] GPIO
- * MPP[5] GPIO
- * MPP[6] PCI_intA (GPIO - In)
- * MPP[7] PCI_intB (GPIO - In)
- * MPP[8-11] N/A
- * MPP[12] SATA 0 presence Indication
- * MPP[13] SATA 1 presence Indication
- * MPP[14] SATA 0 active Indication
- * MPP[15] SATA 1 active indication
- * MPP[16-19] Not used
* MPP[20] PCI Clock to MV88F5182
* MPP[21] PCI Clock to mini PCI CON11
* MPP[22] USB 0 over current indication
@@ -289,16 +283,23 @@ static void __init rd88f5182_init(void)
* MPP[25] USB 0 over current enable
*/
- orion5x_write(MPP_0_7_CTRL, 0x00000003);
- orion5x_write(MPP_8_15_CTRL, 0x55550000);
- orion5x_write(MPP_16_19_CTRL, 0x5555);
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_ehci1_init();
+ orion5x_eth_init(&rd88f5182_eth_data);
+ orion5x_i2c_init();
+ orion5x_sata_init(&rd88f5182_sata_data);
+ orion5x_uart0_init();
- orion5x_gpio_set_valid_pins(0x000000fb);
+ orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
+ RD88F5182_NOR_BOOT_SIZE);
+
+ orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
+ platform_device_register(&rd88f5182_nor_flash);
- platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices));
i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
- orion5x_eth_init(&rd88f5182_eth_data);
- orion5x_sata_init(&rd88f5182_sata_data);
}
MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 9afb41ee6e07..a9cef9703d5b 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -28,6 +28,8 @@
#include <asm/mach/pci.h>
#include <asm/arch/orion5x.h>
#include "common.h"
+#include "mpp.h"
+#include "tsx09-common.h"
#define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
#define QNAP_TS209_NOR_BOOT_SIZE SZ_8M
@@ -47,52 +49,54 @@
***************************************************************************/
static struct mtd_partition qnap_ts209_partitions[] = {
{
- .name = "U-Boot",
- .size = 0x00080000,
- .offset = 0x00780000,
- .mask_flags = MTD_WRITEABLE,
+ .name = "U-Boot",
+ .size = 0x00080000,
+ .offset = 0x00780000,
+ .mask_flags = MTD_WRITEABLE,
}, {
- .name = "Kernel",
- .size = 0x00200000,
- .offset = 0,
+ .name = "Kernel",
+ .size = 0x00200000,
+ .offset = 0,
}, {
- .name = "RootFS1",
- .size = 0x00400000,
- .offset = 0x00200000,
+ .name = "RootFS1",
+ .size = 0x00400000,
+ .offset = 0x00200000,
}, {
- .name = "RootFS2",
- .size = 0x00100000,
- .offset = 0x00600000,
+ .name = "RootFS2",
+ .size = 0x00100000,
+ .offset = 0x00600000,
}, {
- .name = "U-Boot Config",
- .size = 0x00020000,
- .offset = 0x00760000,
+ .name = "U-Boot Config",
+ .size = 0x00020000,
+ .offset = 0x00760000,
}, {
- .name = "NAS Config",
- .size = 0x00060000,
- .offset = 0x00700000,
- .mask_flags = MTD_WRITEABLE,
- }
+ .name = "NAS Config",
+ .size = 0x00060000,
+ .offset = 0x00700000,
+ .mask_flags = MTD_WRITEABLE,
+ },
};
static struct physmap_flash_data qnap_ts209_nor_flash_data = {
- .width = 1,
- .parts = qnap_ts209_partitions,
- .nr_parts = ARRAY_SIZE(qnap_ts209_partitions)
+ .width = 1,
+ .parts = qnap_ts209_partitions,
+ .nr_parts = ARRAY_SIZE(qnap_ts209_partitions)
};
static struct resource qnap_ts209_nor_flash_resource = {
- .flags = IORESOURCE_MEM,
- .start = QNAP_TS209_NOR_BOOT_BASE,
- .end = QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ .start = QNAP_TS209_NOR_BOOT_BASE,
+ .end = QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1,
};
static struct platform_device qnap_ts209_nor_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = { .platform_data = &qnap_ts209_nor_flash_data, },
- .resource = &qnap_ts209_nor_flash_resource,
- .num_resources = 1,
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &qnap_ts209_nor_flash_data,
+ },
+ .resource = &qnap_ts209_nor_flash_resource,
+ .num_resources = 1,
};
/*****************************************************************************
@@ -164,12 +168,12 @@ static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
}
static struct hw_pci qnap_ts209_pci __initdata = {
- .nr_controllers = 2,
- .preinit = qnap_ts209_pci_preinit,
- .swizzle = pci_std_swizzle,
- .setup = orion5x_pci_sys_setup,
- .scan = orion5x_pci_sys_scan_bus,
- .map_irq = qnap_ts209_pci_map_irq,
+ .nr_controllers = 2,
+ .preinit = qnap_ts209_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = qnap_ts209_pci_map_irq,
};
static int __init qnap_ts209_pci_init(void)
@@ -183,96 +187,6 @@ static int __init qnap_ts209_pci_init(void)
subsys_initcall(qnap_ts209_pci_init);
/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data qnap_ts209_eth_data = {
- .phy_addr = 8,
- .force_phy_addr = 1,
-};
-
-static int __init parse_hex_nibble(char n)
-{
- if (n >= '0' && n <= '9')
- return n - '0';
-
- if (n >= 'A' && n <= 'F')
- return n - 'A' + 10;
-
- if (n >= 'a' && n <= 'f')
- return n - 'a' + 10;
-
- return -1;
-}
-
-static int __init parse_hex_byte(const char *b)
-{
- int hi;
- int lo;
-
- hi = parse_hex_nibble(b[0]);
- lo = parse_hex_nibble(b[1]);
-
- if (hi < 0 || lo < 0)
- return -1;
-
- return (hi << 4) | lo;
-}
-
-static int __init check_mac_addr(const char *addr_str)
-{
- u_int8_t addr[6];
- int i;
-
- for (i = 0; i < 6; i++) {
- int byte;
-
- /*
- * Enforce "xx:xx:xx:xx:xx:xx\n" format.
- */
- if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
- return -1;
-
- byte = parse_hex_byte(addr_str + (i * 3));
- if (byte < 0)
- return -1;
- addr[i] = byte;
- }
-
- printk(KERN_INFO "ts209: found ethernet mac address ");
- for (i = 0; i < 6; i++)
- printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
-
- memcpy(qnap_ts209_eth_data.mac_addr, addr, 6);
-
- return 0;
-}
-
-/*
- * The 'NAS Config' flash partition has an ext2 filesystem which
- * contains a file that has the ethernet MAC address in plain text
- * (format "xx:xx:xx:xx:xx:xx\n".)
- */
-static void __init ts209_find_mac_addr(void)
-{
- unsigned long addr;
-
- for (addr = 0x00700000; addr < 0x00760000; addr += 1024) {
- char *nor_page;
- int ret = 0;
-
- nor_page = ioremap(QNAP_TS209_NOR_BOOT_BASE + addr, 1024);
- if (nor_page != NULL) {
- ret = check_mac_addr(nor_page);
- iounmap(nor_page);
- }
-
- if (ret == 0)
- break;
- }
-}
-
-/*****************************************************************************
* RTC S35390A on I2C bus
****************************************************************************/
@@ -280,7 +194,7 @@ static void __init ts209_find_mac_addr(void)
static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = {
I2C_BOARD_INFO("s35390a", 0x30),
- .irq = 0,
+ .irq = 0,
};
/****************************************************************************
@@ -297,70 +211,63 @@ static struct gpio_keys_button qnap_ts209_buttons[] = {
.gpio = QNAP_TS209_GPIO_KEY_MEDIA,
.desc = "USB Copy Button",
.active_low = 1,
- },
- {
+ }, {
.code = KEY_POWER,
.gpio = QNAP_TS209_GPIO_KEY_RESET,
.desc = "Reset Button",
.active_low = 1,
- }
+ },
};
static struct gpio_keys_platform_data qnap_ts209_button_data = {
.buttons = qnap_ts209_buttons,
- .nbuttons = ARRAY_SIZE(qnap_ts209_buttons),
+ .nbuttons = ARRAY_SIZE(qnap_ts209_buttons),
};
static struct platform_device qnap_ts209_button_device = {
.name = "gpio-keys",
.id = -1,
.num_resources = 0,
- .dev = { .platform_data = &qnap_ts209_button_data, },
+ .dev = {
+ .platform_data = &qnap_ts209_button_data,
+ },
};
/*****************************************************************************
* SATA
****************************************************************************/
static struct mv_sata_platform_data qnap_ts209_sata_data = {
- .n_ports = 2,
+ .n_ports = 2,
};
/*****************************************************************************
* General Setup
****************************************************************************/
-
-static struct platform_device *qnap_ts209_devices[] __initdata = {
- &qnap_ts209_nor_flash,
- &qnap_ts209_button_device,
+static struct orion5x_mpp_mode ts209_mpp_modes[] __initdata = {
+ { 0, MPP_UNUSED },
+ { 1, MPP_GPIO }, /* USB copy button */
+ { 2, MPP_GPIO }, /* Load defaults button */
+ { 3, MPP_GPIO }, /* GPIO RTC */
+ { 4, MPP_UNUSED },
+ { 5, MPP_UNUSED },
+ { 6, MPP_GPIO }, /* PCI Int A */
+ { 7, MPP_GPIO }, /* PCI Int B */
+ { 8, MPP_UNUSED },
+ { 9, MPP_UNUSED },
+ { 10, MPP_UNUSED },
+ { 11, MPP_UNUSED },
+ { 12, MPP_SATA_LED }, /* SATA 0 presence */
+ { 13, MPP_SATA_LED }, /* SATA 1 presence */
+ { 14, MPP_SATA_LED }, /* SATA 0 active */
+ { 15, MPP_SATA_LED }, /* SATA 1 active */
+ { 16, MPP_UART }, /* UART1 RXD */
+ { 17, MPP_UART }, /* UART1 TXD */
+ { 18, MPP_GPIO }, /* SW_RST */
+ { 19, MPP_UNUSED },
+ { -1 },
};
-/*
- * QNAP TS-[12]09 specific power off method via UART1-attached PIC
- */
-
-#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
-
-static void qnap_ts209_power_off(void)
-{
- /* 19200 baud divisor */
- const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
-
- pr_info("%s: triggering power-off...\n", __func__);
-
- /* hijack uart1 and reset into sane state (19200,8n1) */
- orion5x_write(UART1_REG(LCR), 0x83);
- orion5x_write(UART1_REG(DLL), divisor & 0xff);
- orion5x_write(UART1_REG(DLM), (divisor >> 8) & 0xff);
- orion5x_write(UART1_REG(LCR), 0x03);
- orion5x_write(UART1_REG(IER), 0x00);
- orion5x_write(UART1_REG(FCR), 0x00);
- orion5x_write(UART1_REG(MCR), 0x00);
-
- /* send the power-off command 'A' to PIC */
- orion5x_write(UART1_REG(TX), 'A');
-}
-
static void __init qnap_ts209_init(void)
{
/*
@@ -368,51 +275,33 @@ static void __init qnap_ts209_init(void)
*/
orion5x_init();
- /*
- * Setup flash mapping
- */
- orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
- QNAP_TS209_NOR_BOOT_SIZE);
-
- /*
- * Open a special address decode windows for the PCIe WA.
- */
- orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
- ORION5X_PCIE_WA_SIZE);
+ orion5x_mpp_conf(ts209_mpp_modes);
/*
- * Setup Multiplexing Pins --
- * MPP[0] Reserved
- * MPP[1] USB copy button (0 active)
- * MPP[2] Load defaults button (0 active)
- * MPP[3] GPIO RTC
- * MPP[4-5] Reserved
- * MPP[6] PCI Int A
- * MPP[7] PCI Int B
- * MPP[8-11] Reserved
- * MPP[12] SATA 0 presence
- * MPP[13] SATA 1 presence
- * MPP[14] SATA 0 active
- * MPP[15] SATA 1 active
- * MPP[16] UART1 RXD
- * MPP[17] UART1 TXD
- * MPP[18] SW_RST (0 active)
- * MPP[19] Reserved
* MPP[20] PCI clock 0
* MPP[21] PCI clock 1
* MPP[22] USB 0 over current
* MPP[23-25] Reserved
*/
- orion5x_write(MPP_0_7_CTRL, 0x3);
- orion5x_write(MPP_8_15_CTRL, 0x55550000);
- orion5x_write(MPP_16_19_CTRL, 0x5500);
- orion5x_gpio_set_valid_pins(0x3cc0fff);
- /* register ts209 specific power-off method */
- pm_power_off = qnap_ts209_power_off;
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_ehci1_init();
+ qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE +
+ qnap_ts209_partitions[5].offset,
+ qnap_ts209_partitions[5].size);
+ orion5x_eth_init(&qnap_tsx09_eth_data);
+ orion5x_i2c_init();
+ orion5x_sata_init(&qnap_ts209_sata_data);
+ orion5x_uart0_init();
+
+ orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
+ QNAP_TS209_NOR_BOOT_SIZE);
+ platform_device_register(&qnap_ts209_nor_flash);
- platform_add_devices(qnap_ts209_devices,
- ARRAY_SIZE(qnap_ts209_devices));
+ platform_device_register(&qnap_ts209_button_device);
/* Get RTC IRQ and register the chip */
if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) {
@@ -425,14 +314,12 @@ static void __init qnap_ts209_init(void)
pr_warning("qnap_ts209_init: failed to get RTC IRQ\n");
i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
- ts209_find_mac_addr();
- orion5x_eth_init(&qnap_ts209_eth_data);
-
- orion5x_sata_init(&qnap_ts209_sata_data);
+ /* register tsx09 specific power-off method */
+ pm_power_off = qnap_tsx09_power_off;
}
MACHINE_START(TS209, "QNAP TS-109/TS-209")
- /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
+ /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
.phys_io = ORION5X_REGS_PHYS_BASE,
.io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
.boot_params = 0x00000100,
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
new file mode 100644
index 000000000000..32f0ff073b7e
--- /dev/null
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -0,0 +1,273 @@
+/*
+ * QNAP TS-409 Board Setup
+ *
+ * Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/serial_reg.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+#include "tsx09-common.h"
+
+/*****************************************************************************
+ * QNAP TS-409 Info
+ ****************************************************************************/
+
+/*
+ * QNAP TS-409 hardware :
+ * - Marvell 88F5281-D0
+ * - Marvell 88SX7042 SATA controller (PCIe)
+ * - Marvell 88E1118 Gigabit Ethernet PHY
+ * - RTC S35390A (@0x30) on I2C bus
+ * - 8MB NOR flash
+ * - 256MB of DDR-2 RAM
+ */
+
+/*
+ * 8MB NOR flash Device bus boot chip select
+ */
+
+#define QNAP_TS409_NOR_BOOT_BASE 0xff800000
+#define QNAP_TS409_NOR_BOOT_SIZE SZ_8M
+
+/****************************************************************************
+ * 8MiB NOR flash. The struct mtd_partition is not in the same order as the
+ * partitions on the device because we want to keep compatability with
+ * existing QNAP firmware.
+ *
+ * Layout as used by QNAP:
+ * [2] 0x00000000-0x00200000 : "Kernel"
+ * [3] 0x00200000-0x00600000 : "RootFS1"
+ * [4] 0x00600000-0x00700000 : "RootFS2"
+ * [6] 0x00700000-0x00760000 : "NAS Config" (read-only)
+ * [5] 0x00760000-0x00780000 : "U-Boot Config"
+ * [1] 0x00780000-0x00800000 : "U-Boot" (read-only)
+ ***************************************************************************/
+static struct mtd_partition qnap_ts409_partitions[] = {
+ {
+ .name = "U-Boot",
+ .size = 0x00080000,
+ .offset = 0x00780000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "Kernel",
+ .size = 0x00200000,
+ .offset = 0,
+ }, {
+ .name = "RootFS1",
+ .size = 0x00400000,
+ .offset = 0x00200000,
+ }, {
+ .name = "RootFS2",
+ .size = 0x00100000,
+ .offset = 0x00600000,
+ }, {
+ .name = "U-Boot Config",
+ .size = 0x00020000,
+ .offset = 0x00760000,
+ }, {
+ .name = "NAS Config",
+ .size = 0x00060000,
+ .offset = 0x00700000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+};
+
+static struct physmap_flash_data qnap_ts409_nor_flash_data = {
+ .width = 1,
+ .parts = qnap_ts409_partitions,
+ .nr_parts = ARRAY_SIZE(qnap_ts409_partitions)
+};
+
+static struct resource qnap_ts409_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = QNAP_TS409_NOR_BOOT_BASE,
+ .end = QNAP_TS409_NOR_BOOT_BASE + QNAP_TS409_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device qnap_ts409_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = { .platform_data = &qnap_ts409_nor_flash_data, },
+ .num_resources = 1,
+ .resource = &qnap_ts409_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+static int __init qnap_ts409_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ /*
+ * Check for devices with hard-wired IRQs.
+ */
+ irq = orion5x_pci_map_irq(dev, slot, pin);
+ if (irq != -1)
+ return irq;
+
+ /*
+ * PCI isn't used on the TS-409
+ */
+ return -1;
+}
+
+static struct hw_pci qnap_ts409_pci __initdata = {
+ .nr_controllers = 2,
+ .swizzle = pci_std_swizzle,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = qnap_ts409_pci_map_irq,
+};
+
+static int __init qnap_ts409_pci_init(void)
+{
+ if (machine_is_ts409())
+ pci_common_init(&qnap_ts409_pci);
+
+ return 0;
+}
+
+subsys_initcall(qnap_ts409_pci_init);
+
+/*****************************************************************************
+ * RTC S35390A on I2C bus
+ ****************************************************************************/
+
+#define TS409_RTC_GPIO 10
+
+static struct i2c_board_info __initdata qnap_ts409_i2c_rtc = {
+ I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ * Power button is attached to the PIC microcontroller
+ ****************************************************************************/
+
+#define QNAP_TS409_GPIO_KEY_MEDIA 15
+
+static struct gpio_keys_button qnap_ts409_buttons[] = {
+ {
+ .code = KEY_RESTART,
+ .gpio = QNAP_TS409_GPIO_KEY_MEDIA,
+ .desc = "USB Copy Button",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data qnap_ts409_button_data = {
+ .buttons = qnap_ts409_buttons,
+ .nbuttons = ARRAY_SIZE(qnap_ts409_buttons),
+};
+
+static struct platform_device qnap_ts409_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &qnap_ts409_button_data,
+ },
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode ts409_mpp_modes[] __initdata = {
+ { 0, MPP_UNUSED },
+ { 1, MPP_UNUSED },
+ { 2, MPP_UNUSED },
+ { 3, MPP_UNUSED },
+ { 4, MPP_GPIO }, /* HDD 1 status */
+ { 5, MPP_GPIO }, /* HDD 2 status */
+ { 6, MPP_GPIO }, /* HDD 3 status */
+ { 7, MPP_GPIO }, /* HDD 4 status */
+ { 8, MPP_UNUSED },
+ { 9, MPP_UNUSED },
+ { 10, MPP_GPIO }, /* RTC int */
+ { 11, MPP_UNUSED },
+ { 12, MPP_UNUSED },
+ { 13, MPP_UNUSED },
+ { 14, MPP_GPIO }, /* SW_RST */
+ { 15, MPP_GPIO }, /* USB copy button */
+ { 16, MPP_UART }, /* UART1 RXD */
+ { 17, MPP_UART }, /* UART1 TXD */
+ { 18, MPP_UNUSED },
+ { 19, MPP_UNUSED },
+ { -1 },
+};
+
+static void __init qnap_ts409_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ orion5x_mpp_conf(ts409_mpp_modes);
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ qnap_tsx09_find_mac_addr(QNAP_TS409_NOR_BOOT_BASE +
+ qnap_ts409_partitions[5].offset,
+ qnap_ts409_partitions[5].size);
+ orion5x_eth_init(&qnap_tsx09_eth_data);
+ orion5x_i2c_init();
+ orion5x_uart0_init();
+
+ orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE,
+ QNAP_TS409_NOR_BOOT_SIZE);
+ platform_device_register(&qnap_ts409_nor_flash);
+
+ platform_device_register(&qnap_ts409_button_device);
+
+ /* Get RTC IRQ and register the chip */
+ if (gpio_request(TS409_RTC_GPIO, "rtc") == 0) {
+ if (gpio_direction_input(TS409_RTC_GPIO) == 0)
+ qnap_ts409_i2c_rtc.irq = gpio_to_irq(TS409_RTC_GPIO);
+ else
+ gpio_free(TS409_RTC_GPIO);
+ }
+ if (qnap_ts409_i2c_rtc.irq == 0)
+ pr_warning("qnap_ts409_init: failed to get RTC IRQ\n");
+ i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
+
+ /* register tsx09 specific power-off method */
+ pm_power_off = qnap_tsx09_power_off;
+}
+
+MACHINE_START(TS409, "QNAP TS-409")
+ /* Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com> */
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = qnap_ts409_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
new file mode 100644
index 000000000000..77e9f351f07a
--- /dev/null
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -0,0 +1,277 @@
+/*
+ * arch/arm/mach-orion5x/ts78xx-setup.c
+ *
+ * Maintainer: Alexander Clouter <alex@digriz.org.uk>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/m48t86.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * TS-78xx Info
+ ****************************************************************************/
+
+/*
+ * FPGA - lives where the PCI bus would be at ORION5X_PCI_MEM_PHYS_BASE
+ */
+#define TS78XX_FPGA_REGS_PHYS_BASE 0xe8000000
+#define TS78XX_FPGA_REGS_VIRT_BASE 0xff900000
+#define TS78XX_FPGA_REGS_SIZE SZ_1M
+
+#define TS78XX_FPGA_REGS_SYSCON_ID (TS78XX_FPGA_REGS_VIRT_BASE | 0x000)
+#define TS78XX_FPGA_REGS_SYSCON_LCDI (TS78XX_FPGA_REGS_VIRT_BASE | 0x004)
+#define TS78XX_FPGA_REGS_SYSCON_LCDO (TS78XX_FPGA_REGS_VIRT_BASE | 0x008)
+
+#define TS78XX_FPGA_REGS_RTC_CTRL (TS78XX_FPGA_REGS_VIRT_BASE | 0x808)
+#define TS78XX_FPGA_REGS_RTC_DATA (TS78XX_FPGA_REGS_VIRT_BASE | 0x80c)
+
+/*
+ * 512kB NOR flash Device
+ */
+#define TS78XX_NOR_BOOT_BASE 0xff800000
+#define TS78XX_NOR_BOOT_SIZE SZ_512K
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc ts78xx_io_desc[] __initdata = {
+ {
+ .virtual = TS78XX_FPGA_REGS_VIRT_BASE,
+ .pfn = __phys_to_pfn(TS78XX_FPGA_REGS_PHYS_BASE),
+ .length = TS78XX_FPGA_REGS_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init ts78xx_map_io(void)
+{
+ orion5x_map_io();
+ iotable_init(ts78xx_io_desc, ARRAY_SIZE(ts78xx_io_desc));
+}
+
+/*****************************************************************************
+ * 512kB NOR Boot Flash - the chip is a M25P40
+ ****************************************************************************/
+static struct mtd_partition ts78xx_nor_boot_flash_resources[] = {
+ {
+ .name = "ts-bootrom",
+ .offset = 0,
+ /* only the first 256kB is used */
+ .size = SZ_256K,
+ .mask_flags = MTD_WRITEABLE,
+ },
+};
+
+static struct physmap_flash_data ts78xx_nor_boot_flash_data = {
+ .width = 1,
+ .parts = ts78xx_nor_boot_flash_resources,
+ .nr_parts = ARRAY_SIZE(ts78xx_nor_boot_flash_resources),
+};
+
+static struct resource ts78xx_nor_boot_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = TS78XX_NOR_BOOT_BASE,
+ .end = TS78XX_NOR_BOOT_BASE + TS78XX_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device ts78xx_nor_boot_flash = {
+ .name = "physmap-flash",
+ .id = -1,
+ .dev = {
+ .platform_data = &ts78xx_nor_boot_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &ts78xx_nor_boot_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+static struct mv643xx_eth_platform_data ts78xx_eth_data = {
+ .phy_addr = 0,
+ .force_phy_addr = 1,
+};
+
+/*****************************************************************************
+ * RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c
+ ****************************************************************************/
+#ifdef CONFIG_RTC_DRV_M48T86
+static unsigned char ts78xx_rtc_readbyte(unsigned long addr)
+{
+ writeb(addr, TS78XX_FPGA_REGS_RTC_CTRL);
+ return readb(TS78XX_FPGA_REGS_RTC_DATA);
+}
+
+static void ts78xx_rtc_writebyte(unsigned char value, unsigned long addr)
+{
+ writeb(addr, TS78XX_FPGA_REGS_RTC_CTRL);
+ writeb(value, TS78XX_FPGA_REGS_RTC_DATA);
+}
+
+static struct m48t86_ops ts78xx_rtc_ops = {
+ .readbyte = ts78xx_rtc_readbyte,
+ .writebyte = ts78xx_rtc_writebyte,
+};
+
+static struct platform_device ts78xx_rtc_device = {
+ .name = "rtc-m48t86",
+ .id = -1,
+ .dev = {
+ .platform_data = &ts78xx_rtc_ops,
+ },
+ .num_resources = 0,
+};
+
+/*
+ * TS uses some of the user storage space on the RTC chip so see if it is
+ * present; as it's an optional feature at purchase time and not all boards
+ * will have it present
+ *
+ * I've used the method TS use in their rtc7800.c example for the detection
+ *
+ * TODO: track down a guinea pig without an RTC to see if we can work out a
+ * better RTC detection routine
+ */
+static int __init ts78xx_rtc_init(void)
+{
+ unsigned char tmp_rtc0, tmp_rtc1;
+
+ tmp_rtc0 = ts78xx_rtc_readbyte(126);
+ tmp_rtc1 = ts78xx_rtc_readbyte(127);
+
+ ts78xx_rtc_writebyte(0x00, 126);
+ ts78xx_rtc_writebyte(0x55, 127);
+ if (ts78xx_rtc_readbyte(127) == 0x55) {
+ ts78xx_rtc_writebyte(0xaa, 127);
+ if (ts78xx_rtc_readbyte(127) == 0xaa
+ && ts78xx_rtc_readbyte(126) == 0x00) {
+ ts78xx_rtc_writebyte(tmp_rtc0, 126);
+ ts78xx_rtc_writebyte(tmp_rtc1, 127);
+ platform_device_register(&ts78xx_rtc_device);
+ return 1;
+ }
+ }
+
+ return 0;
+};
+#else
+static int __init ts78xx_rtc_init(void)
+{
+ return 0;
+}
+#endif
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data ts78xx_sata_data = {
+ .n_ports = 2,
+};
+
+/*****************************************************************************
+ * print some information regarding the board
+ ****************************************************************************/
+static void __init ts78xx_print_board_id(void)
+{
+ unsigned int board_info;
+
+ board_info = readl(TS78XX_FPGA_REGS_SYSCON_ID);
+ printk(KERN_INFO "TS-78xx Info: FPGA rev=%.2x, Board Magic=%.6x, ",
+ board_info & 0xff,
+ (board_info >> 8) & 0xffffff);
+ board_info = readl(TS78XX_FPGA_REGS_SYSCON_LCDI);
+ printk("JP1=%d, JP2=%d\n",
+ (board_info >> 30) & 0x1,
+ (board_info >> 31) & 0x1);
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode ts78xx_mpp_modes[] __initdata = {
+ { 0, MPP_UNUSED },
+ { 1, MPP_GPIO }, /* JTAG Clock */
+ { 2, MPP_GPIO }, /* JTAG Data In */
+ { 3, MPP_GPIO }, /* Lat ECP2 256 FPGA - PB2B */
+ { 4, MPP_GPIO }, /* JTAG Data Out */
+ { 5, MPP_GPIO }, /* JTAG TMS */
+ { 6, MPP_GPIO }, /* Lat ECP2 256 FPGA - PB31A_CLK4+ */
+ { 7, MPP_GPIO }, /* Lat ECP2 256 FPGA - PB22B */
+ { 8, MPP_UNUSED },
+ { 9, MPP_UNUSED },
+ { 10, MPP_UNUSED },
+ { 11, MPP_UNUSED },
+ { 12, MPP_UNUSED },
+ { 13, MPP_UNUSED },
+ { 14, MPP_UNUSED },
+ { 15, MPP_UNUSED },
+ { 16, MPP_UART },
+ { 17, MPP_UART },
+ { 18, MPP_UART },
+ { 19, MPP_UART },
+ { -1 },
+};
+
+static void __init ts78xx_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ ts78xx_print_board_id();
+
+ orion5x_mpp_conf(ts78xx_mpp_modes);
+
+ /*
+ * MPP[20] PCI Clock Out 1
+ * MPP[21] PCI Clock Out 0
+ * MPP[22] Unused
+ * MPP[23] Unused
+ * MPP[24] Unused
+ * MPP[25] Unused
+ */
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_ehci1_init();
+ orion5x_eth_init(&ts78xx_eth_data);
+ orion5x_sata_init(&ts78xx_sata_data);
+ orion5x_uart0_init();
+ orion5x_uart1_init();
+
+ orion5x_setup_dev_boot_win(TS78XX_NOR_BOOT_BASE,
+ TS78XX_NOR_BOOT_SIZE);
+ platform_device_register(&ts78xx_nor_boot_flash);
+
+ if (!ts78xx_rtc_init())
+ printk(KERN_INFO "TS-78xx RTC not detected or enabled\n");
+}
+
+MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
+ /* Maintainer: Alexander Clouter <alex@digriz.org.uk> */
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = ts78xx_init,
+ .map_io = ts78xx_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/tsx09-common.c b/arch/arm/mach-orion5x/tsx09-common.c
new file mode 100644
index 000000000000..83feac3147a6
--- /dev/null
+++ b/arch/arm/mach-orion5x/tsx09-common.c
@@ -0,0 +1,133 @@
+/*
+ * QNAP TS-x09 Boards common functions
+ *
+ * Maintainers: Lennert Buytenhek <buytenh@marvell.com>
+ * Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/timex.h>
+#include <linux/serial_reg.h>
+#include "tsx09-common.h"
+
+/*****************************************************************************
+ * QNAP TS-x09 specific power off method via UART1-attached PIC
+ ****************************************************************************/
+
+#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
+
+void qnap_tsx09_power_off(void)
+{
+ /* 19200 baud divisor */
+ const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
+
+ pr_info("%s: triggering power-off...\n", __func__);
+
+ /* hijack uart1 and reset into sane state (19200,8n1) */
+ writel(0x83, UART1_REG(LCR));
+ writel(divisor & 0xff, UART1_REG(DLL));
+ writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+ writel(0x03, UART1_REG(LCR));
+ writel(0x00, UART1_REG(IER));
+ writel(0x00, UART1_REG(FCR));
+ writel(0x00, UART1_REG(MCR));
+
+ /* send the power-off command 'A' to PIC */
+ writel('A', UART1_REG(TX));
+}
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+struct mv643xx_eth_platform_data qnap_tsx09_eth_data = {
+ .phy_addr = 8,
+};
+
+static int __init qnap_tsx09_parse_hex_nibble(char n)
+{
+ if (n >= '0' && n <= '9')
+ return n - '0';
+
+ if (n >= 'A' && n <= 'F')
+ return n - 'A' + 10;
+
+ if (n >= 'a' && n <= 'f')
+ return n - 'a' + 10;
+
+ return -1;
+}
+
+static int __init qnap_tsx09_parse_hex_byte(const char *b)
+{
+ int hi;
+ int lo;
+
+ hi = qnap_tsx09_parse_hex_nibble(b[0]);
+ lo = qnap_tsx09_parse_hex_nibble(b[1]);
+
+ if (hi < 0 || lo < 0)
+ return -1;
+
+ return (hi << 4) | lo;
+}
+
+static int __init qnap_tsx09_check_mac_addr(const char *addr_str)
+{
+ u_int8_t addr[6];
+ int i;
+
+ for (i = 0; i < 6; i++) {
+ int byte;
+
+ /*
+ * Enforce "xx:xx:xx:xx:xx:xx\n" format.
+ */
+ if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
+ return -1;
+
+ byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3));
+ if (byte < 0)
+ return -1;
+ addr[i] = byte;
+ }
+
+ printk(KERN_INFO "tsx09: found ethernet mac address ");
+ for (i = 0; i < 6; i++)
+ printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
+
+ memcpy(qnap_tsx09_eth_data.mac_addr, addr, 6);
+
+ return 0;
+}
+
+/*
+ * The 'NAS Config' flash partition has an ext2 filesystem which
+ * contains a file that has the ethernet MAC address in plain text
+ * (format "xx:xx:xx:xx:xx:xx\n").
+ */
+void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size)
+{
+ unsigned long addr;
+
+ for (addr = mem_base; addr < (mem_base + size); addr += 1024) {
+ char *nor_page;
+ int ret = 0;
+
+ nor_page = ioremap(addr, 1024);
+ if (nor_page != NULL) {
+ ret = qnap_tsx09_check_mac_addr(nor_page);
+ iounmap(nor_page);
+ }
+
+ if (ret == 0)
+ break;
+ }
+}
diff --git a/arch/arm/mach-orion5x/tsx09-common.h b/arch/arm/mach-orion5x/tsx09-common.h
new file mode 100644
index 000000000000..0984264616f0
--- /dev/null
+++ b/arch/arm/mach-orion5x/tsx09-common.h
@@ -0,0 +1,20 @@
+#ifndef __ARCH_ORION5X_TSX09_COMMON_H
+#define __ARCH_ORION5X_TSX09_COMMON_H
+
+/*
+ * QNAP TS-x09 Boards power-off function
+ */
+extern void qnap_tsx09_power_off(void);
+
+/*
+ * QNAP TS-x09 Boards function to find Ethernet MAC address in flash memory
+ */
+extern void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size);
+
+/*
+ * QNAP TS-x09 Boards ethernet declaration
+ */
+extern struct mv643xx_eth_platform_data qnap_tsx09_eth_data;
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
new file mode 100644
index 000000000000..1af093ff8cf3
--- /dev/null
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -0,0 +1,164 @@
+/*
+ * arch/arm/mach-orion5x/wnr854t-setup.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct orion5x_mpp_mode wnr854t_mpp_modes[] __initdata = {
+ { 0, MPP_GPIO }, /* Power LED green (0=on) */
+ { 1, MPP_GPIO }, /* Reset Button (0=off) */
+ { 2, MPP_GPIO }, /* Power LED blink (0=off) */
+ { 3, MPP_GPIO }, /* WAN Status LED amber (0=off) */
+ { 4, MPP_GPIO }, /* PCI int */
+ { 5, MPP_GPIO }, /* ??? */
+ { 6, MPP_GPIO }, /* ??? */
+ { 7, MPP_GPIO }, /* ??? */
+ { 8, MPP_UNUSED }, /* ??? */
+ { 9, MPP_GIGE }, /* GE_RXERR */
+ { 10, MPP_UNUSED }, /* ??? */
+ { 11, MPP_UNUSED }, /* ??? */
+ { 12, MPP_GIGE }, /* GE_TXD[4] */
+ { 13, MPP_GIGE }, /* GE_TXD[5] */
+ { 14, MPP_GIGE }, /* GE_TXD[6] */
+ { 15, MPP_GIGE }, /* GE_TXD[7] */
+ { 16, MPP_GIGE }, /* GE_RXD[4] */
+ { 17, MPP_GIGE }, /* GE_RXD[5] */
+ { 18, MPP_GIGE }, /* GE_RXD[6] */
+ { 19, MPP_GIGE }, /* GE_RXD[7] */
+ { -1 },
+};
+
+/*
+ * 8M NOR flash Device bus boot chip select
+ */
+#define WNR854T_NOR_BOOT_BASE 0xf4000000
+#define WNR854T_NOR_BOOT_SIZE SZ_8M
+
+static struct mtd_partition wnr854t_nor_flash_partitions[] = {
+ {
+ .name = "kernel",
+ .offset = 0x00000000,
+ .size = 0x00100000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x00100000,
+ .size = 0x00660000,
+ }, {
+ .name = "uboot",
+ .offset = 0x00760000,
+ .size = 0x00040000,
+ },
+};
+
+static struct physmap_flash_data wnr854t_nor_flash_data = {
+ .width = 2,
+ .parts = wnr854t_nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(wnr854t_nor_flash_partitions),
+};
+
+static struct resource wnr854t_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = WNR854T_NOR_BOOT_BASE,
+ .end = WNR854T_NOR_BOOT_BASE + WNR854T_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device wnr854t_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &wnr854t_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &wnr854t_nor_flash_resource,
+};
+
+static struct mv643xx_eth_platform_data wnr854t_eth_data = {
+ .phy_addr = -1,
+};
+
+static void __init wnr854t_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ orion5x_mpp_conf(wnr854t_mpp_modes);
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_eth_init(&wnr854t_eth_data);
+ orion5x_uart0_init();
+
+ orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE,
+ WNR854T_NOR_BOOT_SIZE);
+ platform_device_register(&wnr854t_nor_flash);
+}
+
+static int __init wnr854t_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ /*
+ * Check for devices with hard-wired IRQs.
+ */
+ irq = orion5x_pci_map_irq(dev, slot, pin);
+ if (irq != -1)
+ return irq;
+
+ /*
+ * Mini-PCI slot.
+ */
+ if (slot == 7)
+ return gpio_to_irq(4);
+
+ return -1;
+}
+
+static struct hw_pci wnr854t_pci __initdata = {
+ .nr_controllers = 2,
+ .swizzle = pci_std_swizzle,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = wnr854t_pci_map_irq,
+};
+
+static int __init wnr854t_pci_init(void)
+{
+ if (machine_is_wnr854t())
+ pci_common_init(&wnr854t_pci);
+
+ return 0;
+}
+subsys_initcall(wnr854t_pci_init);
+
+MACHINE_START(WNR854T, "Netgear WNR854T")
+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = wnr854t_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
new file mode 100644
index 000000000000..aeab55c6a82d
--- /dev/null
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-orion5x/wrt350n-v2-setup.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = {
+ { 0, MPP_GPIO }, /* Power LED green (0=on) */
+ { 1, MPP_GPIO }, /* Security LED (0=on) */
+ { 2, MPP_GPIO }, /* Internal Button (0=on) */
+ { 3, MPP_GPIO }, /* Reset Button (0=on) */
+ { 4, MPP_GPIO }, /* PCI int */
+ { 5, MPP_GPIO }, /* Power LED orange (0=on) */
+ { 6, MPP_GPIO }, /* USB LED (0=on) */
+ { 7, MPP_GPIO }, /* Wireless LED (0=on) */
+ { 8, MPP_UNUSED }, /* ??? */
+ { 9, MPP_GIGE }, /* GE_RXERR */
+ { 10, MPP_UNUSED }, /* ??? */
+ { 11, MPP_UNUSED }, /* ??? */
+ { 12, MPP_GIGE }, /* GE_TXD[4] */
+ { 13, MPP_GIGE }, /* GE_TXD[5] */
+ { 14, MPP_GIGE }, /* GE_TXD[6] */
+ { 15, MPP_GIGE }, /* GE_TXD[7] */
+ { 16, MPP_GIGE }, /* GE_RXD[4] */
+ { 17, MPP_GIGE }, /* GE_RXD[5] */
+ { 18, MPP_GIGE }, /* GE_RXD[6] */
+ { 19, MPP_GIGE }, /* GE_RXD[7] */
+ { -1 },
+};
+
+/*
+ * 8M NOR flash Device bus boot chip select
+ */
+#define WRT350N_V2_NOR_BOOT_BASE 0xf4000000
+#define WRT350N_V2_NOR_BOOT_SIZE SZ_8M
+
+static struct mtd_partition wrt350n_v2_nor_flash_partitions[] = {
+ {
+ .name = "kernel",
+ .offset = 0x00000000,
+ .size = 0x00760000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x001a0000,
+ .size = 0x005c0000,
+ }, {
+ .name = "lang",
+ .offset = 0x00760000,
+ .size = 0x00040000,
+ }, {
+ .name = "nvram",
+ .offset = 0x007a0000,
+ .size = 0x00020000,
+ }, {
+ .name = "u-boot",
+ .offset = 0x007c0000,
+ .size = 0x00040000,
+ },
+};
+
+static struct physmap_flash_data wrt350n_v2_nor_flash_data = {
+ .width = 1,
+ .parts = wrt350n_v2_nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(wrt350n_v2_nor_flash_partitions),
+};
+
+static struct resource wrt350n_v2_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = WRT350N_V2_NOR_BOOT_BASE,
+ .end = WRT350N_V2_NOR_BOOT_BASE + WRT350N_V2_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device wrt350n_v2_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &wrt350n_v2_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &wrt350n_v2_nor_flash_resource,
+};
+
+static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
+ .phy_addr = -1,
+};
+
+static void __init wrt350n_v2_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ orion5x_mpp_conf(wrt350n_v2_mpp_modes);
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_eth_init(&wrt350n_v2_eth_data);
+ orion5x_uart0_init();
+
+ orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
+ WRT350N_V2_NOR_BOOT_SIZE);
+ platform_device_register(&wrt350n_v2_nor_flash);
+}
+
+static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ /*
+ * Check for devices with hard-wired IRQs.
+ */
+ irq = orion5x_pci_map_irq(dev, slot, pin);
+ if (irq != -1)
+ return irq;
+
+ /*
+ * Mini-PCI slot.
+ */
+ if (slot == 7)
+ return gpio_to_irq(4);
+
+ return -1;
+}
+
+static struct hw_pci wrt350n_v2_pci __initdata = {
+ .nr_controllers = 2,
+ .swizzle = pci_std_swizzle,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = wrt350n_v2_pci_map_irq,
+};
+
+static int __init wrt350n_v2_pci_init(void)
+{
+ if (machine_is_wrt350n_v2())
+ pci_common_init(&wrt350n_v2_pci);
+
+ return 0;
+}
+subsys_initcall(wrt350n_v2_pci_init);
+
+MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
+ /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = wrt350n_v2_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 5da7a6820492..914bb33dab92 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -20,8 +20,7 @@ endmenu
endif
-choice
- prompt "Select target board"
+menu "Select target boards"
config ARCH_GUMSTIX
bool "Gumstix XScale boards"
@@ -37,10 +36,12 @@ config ARCH_LUBBOCK
config MACH_LOGICPD_PXA270
bool "LogicPD PXA270 Card Engine Development Platform"
select PXA27x
+ select HAVE_PWM
config MACH_MAINSTONE
bool "Intel HCDDBBVA0 Development Platform"
select PXA27x
+ select HAVE_PWM
config ARCH_PXA_IDP
bool "Accelent Xscale IDP"
@@ -116,6 +117,7 @@ config MACH_COLIBRI
config MACH_ZYLONITE
bool "PXA3xx Development Platform"
select PXA3xx
+ select HAVE_PWM
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
@@ -138,7 +140,7 @@ config MACH_PCM027
select PXA27x
select IWMMXT
-endchoice
+endmenu
choice
prompt "Used baseboard"
@@ -146,25 +148,24 @@ choice
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
+ select HAVE_PWM
endchoice
-if PXA_SHARPSL
-
choice
- prompt "Select target Sharp Zaurus device range"
+ prompt "display on pcm990"
+ depends on MACH_PCM990_BASEBOARD
-config PXA_SHARPSL_25x
- bool "Sharp PXA25x models (SL-5600, SL-C7xx and SL-C6000x)"
- select PXA25x
+config PCM990_DISPLAY_SHARP
+ bool "sharp lq084v1dg21 stn display"
-config PXA_SHARPSL_27x
- bool "Sharp PXA270 models (SL-Cxx00)"
- select PXA27x
+config PCM990_DISPLAY_NEC
+ bool "nec nl6448bc20_18d tft display"
-endchoice
+config PCM990_DISPLAY_NONE
+ bool "no display"
-endif
+endchoice
if ARCH_GUMSTIX
@@ -199,28 +200,33 @@ endmenu
config MACH_POODLE
bool "Enable Sharp SL-5600 (Poodle) Support"
- depends on PXA_SHARPSL_25x
+ depends on PXA_SHARPSL
+ select PXA25x
select SHARP_LOCOMO
select PXA_SSP
config MACH_CORGI
bool "Enable Sharp SL-C700 (Corgi) Support"
- depends on PXA_SHARPSL_25x
+ depends on PXA_SHARPSL
+ select PXA25x
select PXA_SHARP_C7xx
config MACH_SHEPHERD
bool "Enable Sharp SL-C750 (Shepherd) Support"
- depends on PXA_SHARPSL_25x
+ depends on PXA_SHARPSL
+ select PXA25x
select PXA_SHARP_C7xx
config MACH_HUSKY
bool "Enable Sharp SL-C760 (Husky) Support"
- depends on PXA_SHARPSL_25x
+ depends on PXA_SHARPSL
+ select PXA25x
select PXA_SHARP_C7xx
config MACH_AKITA
bool "Enable Sharp SL-1000 (Akita) Support"
- depends on PXA_SHARPSL_27x
+ depends on PXA_SHARPSL
+ select PXA27x
select PXA_SHARP_Cxx00
select MACH_SPITZ
select I2C
@@ -228,17 +234,20 @@ config MACH_AKITA
config MACH_SPITZ
bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
- depends on PXA_SHARPSL_27x
+ depends on PXA_SHARPSL
+ select PXA27x
select PXA_SHARP_Cxx00
config MACH_BORZOI
bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
- depends on PXA_SHARPSL_27x
+ depends on PXA_SHARPSL
+ select PXA27x
select PXA_SHARP_Cxx00
config MACH_TOSA
bool "Enable Sharp SL-6000x (Tosa) Support"
- depends on PXA_SHARPSL_25x
+ depends on PXA_SHARPSL
+ select PXA25x
config PXA25x
bool
@@ -273,4 +282,10 @@ config PXA_SSP
tristate
help
Enable support for PXA2xx SSP ports
+
+config PXA_PWM
+ tristate
+ default BACKLIGHT_PWM
+ help
+ Enable support for PXA2xx/PXA3xx PWM controllers
endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 0e6d05bb81aa..c4dfbe87fc4e 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -10,10 +10,11 @@ obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o
# Generic drivers that other drivers may depend upon
obj-$(CONFIG_PXA_SSP) += ssp.o
+obj-$(CONFIG_PXA_PWM) += pwm.o
# SoC-specific code
-obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa25x.o
-obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa27x.o
+obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o
+obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o
obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o
obj-$(CONFIG_CPU_PXA300) += pxa300.o
obj-$(CONFIG_CPU_PXA320) += pxa320.o
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index e97dc59813c8..b4d04955dcb0 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -12,7 +12,7 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
-#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
#include <asm/hardware.h>
@@ -47,6 +47,9 @@ struct clk *clk_get(struct device *dev, const char *id)
clk = p;
mutex_unlock(&clocks_mutex);
+ if (!IS_ERR(clk) && clk->ops == NULL)
+ clk = clk->other;
+
return clk;
}
EXPORT_SYMBOL(clk_get);
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index bc6b77e1592e..83cbfaba485d 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -15,6 +15,7 @@ struct clk {
unsigned int cken;
unsigned int delay;
unsigned int enabled;
+ struct clk *other;
};
#define INIT_CKEN(_name, _cken, _rate, _delay, _dev) \
@@ -35,6 +36,17 @@ struct clk {
.cken = CKEN_##_cken, \
}
+/*
+ * This is a placeholder to alias one clock device+name pair
+ * to another struct clk.
+ */
+#define INIT_CKOTHER(_name, _other, _dev) \
+ { \
+ .name = _name, \
+ .dev = _dev, \
+ .other = _other, \
+ }
+
extern const struct clkops clk_cken_ops;
void clk_cken_enable(struct clk *clk);
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c
index ac7f05f9f3eb..319c9ff3ab9a 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x270-pci.c
@@ -41,18 +41,20 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
{
unsigned int sz = SZ_64M >> PAGE_SHIFT;
- pr_info("Adjusting zones for CM-x270\n");
-
- /*
- * Only adjust if > 64M on current system
- */
- if (node || (zone_size[0] <= sz))
- return;
-
- zone_size[1] = zone_size[0] - sz;
- zone_size[0] = sz;
- zhole_size[1] = zhole_size[0];
- zhole_size[0] = 0;
+ if (machine_is_armcore()) {
+ pr_info("Adjusting zones for CM-x270\n");
+
+ /*
+ * Only adjust if > 64M on current system
+ */
+ if (node || (zone_size[0] <= sz))
+ return;
+
+ zone_size[1] = zone_size[0] - sz;
+ zone_size[0] = sz;
+ zhole_size[1] = zhole_size[0];
+ zhole_size[0] = 0;
+ }
}
static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index f5851d1adc25..01b9964acec1 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -31,6 +31,7 @@
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
+#include <asm/arch/audio.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/ohci.h>
#include <asm/arch/mmc.h>
@@ -81,12 +82,6 @@ static struct platform_device cmx270_device_dm9k = {
}
};
-/* audio device */
-static struct platform_device cmx270_audio_device = {
- .name = "pxa2xx-ac97",
- .id = -1,
-};
-
/* touchscreen controller */
static struct platform_device cmx270_ts_device = {
.name = "ucb1400_ts",
@@ -219,7 +214,6 @@ static struct platform_device cmx270_ata = {
/* platform devices */
static struct platform_device *platform_devices[] __initdata = {
&cmx270_device_dm9k,
- &cmx270_audio_device,
&cmx270_rtc_device,
&cmx270_2700G,
&cmx270_led_device,
@@ -594,6 +588,7 @@ static void __init cmx270_init(void)
/* register CM-X270 platform devices */
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+ pxa_set_ac97_info(NULL);
/* set MCI and OHCI platform parameters */
pxa_set_mci_info(&cmx270_mci_platform_data);
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index b757dd756655..b37671b71886 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -36,6 +36,7 @@
#include <asm/mach/irq.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
#include <asm/arch/irda.h>
#include <asm/arch/mmc.h>
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 0a85f706e887..e91c0f26c412 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -26,6 +26,7 @@
#include <asm/arch/sharpsl.h>
#include <asm/arch/corgi.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
#include "sharpsl.h"
@@ -204,7 +205,9 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
.read_devdata = corgipm_read_devdata,
.charger_wakeup = corgi_charger_wakeup,
.should_wakeup = corgi_should_wakeup,
+#ifdef CONFIG_BACKLIGHT_CORGI
.backlight_limit = corgibl_limit_intensity,
+#endif
.charge_on_volt = SHARPSL_CHARGE_ON_VOLT,
.charge_on_temp = SHARPSL_CHARGE_ON_TEMP,
.charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,
@@ -226,6 +229,10 @@ static int __devinit corgipm_init(void)
{
int ret;
+ if (!machine_is_corgi() && !machine_is_shepherd()
+ && !machine_is_husky())
+ return -ENODEV;
+
corgipm_device = platform_device_alloc("sharpsl-pm", -1);
if (!corgipm_device)
return -ENOMEM;
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index d6c05b6eab35..a6f2390ce662 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -10,11 +10,14 @@
#include <asm/arch/mmc.h>
#include <asm/arch/irda.h>
#include <asm/arch/i2c.h>
+#include <asm/arch/mfp-pxa27x.h>
#include <asm/arch/ohci.h>
#include <asm/arch/pxa27x_keypad.h>
#include <asm/arch/camera.h>
+#include <asm/arch/audio.h>
#include "devices.h"
+#include "generic.h"
void __init pxa_register_device(struct platform_device *dev, void *data)
{
@@ -91,8 +94,19 @@ static struct resource pxa2xx_udc_resources[] = {
static u64 udc_dma_mask = ~(u32)0;
-struct platform_device pxa_device_udc = {
- .name = "pxa2xx-udc",
+struct platform_device pxa25x_device_udc = {
+ .name = "pxa25x-udc",
+ .id = -1,
+ .resource = pxa2xx_udc_resources,
+ .num_resources = ARRAY_SIZE(pxa2xx_udc_resources),
+ .dev = {
+ .platform_data = &pxa_udc_info,
+ .dma_mask = &udc_dma_mask,
+ }
+};
+
+struct platform_device pxa27x_device_udc = {
+ .name = "pxa27x-udc",
.id = -1,
.resource = pxa2xx_udc_resources,
.num_resources = ARRAY_SIZE(pxa2xx_udc_resources),
@@ -233,8 +247,15 @@ struct platform_device pxa_device_i2c = {
.num_resources = ARRAY_SIZE(pxai2c_resources),
};
+static unsigned long pxa27x_i2c_mfp_cfg[] = {
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+};
+
void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
{
+ if (cpu_is_pxa27x())
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(pxa27x_i2c_mfp_cfg));
pxa_register_device(&pxa_device_i2c, info);
}
@@ -278,8 +299,69 @@ struct platform_device pxa_device_rtc = {
.id = -1,
};
+static struct resource pxa_ac97_resources[] = {
+ [0] = {
+ .start = 0x40500000,
+ .end = 0x40500000 + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_AC97,
+ .end = IRQ_AC97,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 pxa_ac97_dmamask = 0xffffffffUL;
+
+struct platform_device pxa_device_ac97 = {
+ .name = "pxa2xx-ac97",
+ .id = -1,
+ .dev = {
+ .dma_mask = &pxa_ac97_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pxa_ac97_resources),
+ .resource = pxa_ac97_resources,
+};
+
+void __init pxa_set_ac97_info(pxa2xx_audio_ops_t *ops)
+{
+ pxa_register_device(&pxa_device_ac97, ops);
+}
+
#ifdef CONFIG_PXA25x
+static struct resource pxa25x_resource_pwm0[] = {
+ [0] = {
+ .start = 0x40b00000,
+ .end = 0x40b0000f,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device pxa25x_device_pwm0 = {
+ .name = "pxa25x-pwm",
+ .id = 0,
+ .resource = pxa25x_resource_pwm0,
+ .num_resources = ARRAY_SIZE(pxa25x_resource_pwm0),
+};
+
+static struct resource pxa25x_resource_pwm1[] = {
+ [0] = {
+ .start = 0x40c00000,
+ .end = 0x40c0000f,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device pxa25x_device_pwm1 = {
+ .name = "pxa25x-pwm",
+ .id = 1,
+ .resource = pxa25x_resource_pwm1,
+ .num_resources = ARRAY_SIZE(pxa25x_resource_pwm1),
+};
+
static u64 pxa25x_ssp_dma_mask = DMA_BIT_MASK(32);
static struct resource pxa25x_resource_ssp[] = {
@@ -568,6 +650,36 @@ struct platform_device pxa27x_device_ssp3 = {
.num_resources = ARRAY_SIZE(pxa27x_resource_ssp3),
};
+static struct resource pxa27x_resource_pwm0[] = {
+ [0] = {
+ .start = 0x40b00000,
+ .end = 0x40b0001f,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device pxa27x_device_pwm0 = {
+ .name = "pxa27x-pwm",
+ .id = 0,
+ .resource = pxa27x_resource_pwm0,
+ .num_resources = ARRAY_SIZE(pxa27x_resource_pwm0),
+};
+
+static struct resource pxa27x_resource_pwm1[] = {
+ [0] = {
+ .start = 0x40c00000,
+ .end = 0x40c0001f,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device pxa27x_device_pwm1 = {
+ .name = "pxa27x-pwm",
+ .id = 1,
+ .resource = pxa27x_resource_pwm1,
+ .num_resources = ARRAY_SIZE(pxa27x_resource_pwm1),
+};
+
static struct resource pxa27x_resource_camera[] = {
[0] = {
.start = 0x50000000,
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index fcab017f27ee..b852eb18daa5 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -1,7 +1,8 @@
extern struct platform_device pxa_device_mci;
extern struct platform_device pxa3xx_device_mci2;
extern struct platform_device pxa3xx_device_mci3;
-extern struct platform_device pxa_device_udc;
+extern struct platform_device pxa25x_device_udc;
+extern struct platform_device pxa27x_device_udc;
extern struct platform_device pxa_device_fb;
extern struct platform_device pxa_device_ffuart;
extern struct platform_device pxa_device_btuart;
@@ -11,6 +12,7 @@ extern struct platform_device pxa_device_i2c;
extern struct platform_device pxa_device_i2s;
extern struct platform_device pxa_device_ficp;
extern struct platform_device pxa_device_rtc;
+extern struct platform_device pxa_device_ac97;
extern struct platform_device pxa27x_device_i2c_power;
extern struct platform_device pxa27x_device_ohci;
@@ -24,4 +26,9 @@ extern struct platform_device pxa27x_device_ssp2;
extern struct platform_device pxa27x_device_ssp3;
extern struct platform_device pxa3xx_device_ssp4;
+extern struct platform_device pxa25x_device_pwm0;
+extern struct platform_device pxa25x_device_pwm1;
+extern struct platform_device pxa27x_device_pwm0;
+extern struct platform_device pxa27x_device_pwm1;
+
void __init pxa_register_device(struct platform_device *dev, void *data);
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 9c57700ee5c2..1bf680749928 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -24,6 +24,8 @@
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
+#include <asm/arch/pxa27x-udc.h>
+#include <asm/arch/audio.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/ohci.h>
#include <asm/arch/mmc.h>
@@ -72,12 +74,6 @@ static struct platform_device em_x270_dm9k = {
}
};
-/* audio device */
-static struct platform_device em_x270_audio = {
- .name = "pxa2xx-ac97",
- .id = -1,
-};
-
/* WM9712 touchscreen controller. Hopefully the driver will make it to
* the mainstream sometime */
static struct platform_device em_x270_ts = {
@@ -217,7 +213,6 @@ static struct platform_device em_x270_nand = {
/* platform devices */
static struct platform_device *platform_devices[] __initdata = {
&em_x270_dm9k,
- &em_x270_audio,
&em_x270_ts,
&em_x270_rtc,
&em_x270_nand,
@@ -325,6 +320,7 @@ static void __init em_x270_init(void)
/* register EM-X270 platform devices */
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+ pxa_set_ac97_info(NULL);
/* set MCI and OHCI platform parameters */
pxa_set_mci_info(&em_x270_mci_platform_data);
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 44617938f3f1..ca053226fba0 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -60,23 +60,6 @@ unsigned int get_memclk_frequency_10khz(void)
EXPORT_SYMBOL(get_memclk_frequency_10khz);
/*
- * Routine to safely enable or disable a clock in the CKEN
- */
-void __pxa_set_cken(int clock, int enable)
-{
- unsigned long flags;
- local_irq_save(flags);
-
- if (enable)
- CKEN |= (1 << clock);
- else
- CKEN &= ~(1 << clock);
-
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(__pxa_set_cken);
-
-/*
* Intel PXA2xx internal register mapping.
*
* Note 1: not all PXA2xx variants implement all those addresses.
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index a9a0c3fab159..fbff557bb225 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -21,7 +21,6 @@
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index a20e4b1649d6..cc1c4fa06145 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -23,6 +23,7 @@
#include <linux/ioport.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/pwm_backlight.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -134,9 +135,12 @@ static struct sys_device lpd270_irq_device = {
static int __init lpd270_irq_device_init(void)
{
- int ret = sysdev_class_register(&lpd270_irq_sysclass);
- if (ret == 0)
- ret = sysdev_register(&lpd270_irq_device);
+ int ret = -ENODEV;
+ if (machine_is_logicpd_pxa270()) {
+ ret = sysdev_class_register(&lpd270_irq_sysclass);
+ if (ret == 0)
+ ret = sysdev_register(&lpd270_irq_device);
+ }
return ret;
}
@@ -164,11 +168,6 @@ static struct platform_device smc91x_device = {
.resource = smc91x_resources,
};
-static struct platform_device lpd270_audio_device = {
- .name = "pxa2xx-ac97",
- .id = -1,
-};
-
static struct resource lpd270_flash_resources[] = {
[0] = {
.start = PXA_CS0_PHYS,
@@ -233,21 +232,20 @@ static struct platform_device lpd270_flash_device[2] = {
},
};
-static void lpd270_backlight_power(int on)
-{
- if (on) {
- pxa_gpio_mode(GPIO16_PWM0_MD);
- pxa_set_cken(CKEN_PWM0, 1);
- PWM_CTRL0 = 0;
- PWM_PWDUTY0 = 0x3ff;
- PWM_PERVAL0 = 0x3ff;
- } else {
- PWM_CTRL0 = 0;
- PWM_PWDUTY0 = 0x0;
- PWM_PERVAL0 = 0x3FF;
- pxa_set_cken(CKEN_PWM0, 0);
- }
-}
+static struct platform_pwm_backlight_data lpd270_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 1,
+ .dft_brightness = 1,
+ .pwm_period_ns = 78770,
+};
+
+static struct platform_device lpd270_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &lpd270_backlight_data,
+ },
+};
/* 5.7" TFT QVGA (LoLo display number 1) */
static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
@@ -269,7 +267,6 @@ static struct pxafb_mach_info sharp_lq057q3dc02 = {
.num_modes = 1,
.lccr0 = 0x07800080,
.lccr3 = 0x00400000,
- .pxafb_backlight_power = lpd270_backlight_power,
};
/* 12.1" TFT SVGA (LoLo display number 2) */
@@ -292,7 +289,6 @@ static struct pxafb_mach_info sharp_lq121s1dg31 = {
.num_modes = 1,
.lccr0 = 0x07800080,
.lccr3 = 0x00400000,
- .pxafb_backlight_power = lpd270_backlight_power,
};
/* 3.6" TFT QVGA (LoLo display number 3) */
@@ -315,7 +311,6 @@ static struct pxafb_mach_info sharp_lq036q1da01 = {
.num_modes = 1,
.lccr0 = 0x07800080,
.lccr3 = 0x00400000,
- .pxafb_backlight_power = lpd270_backlight_power,
};
/* 6.4" TFT VGA (LoLo display number 5) */
@@ -338,7 +333,6 @@ static struct pxafb_mach_info sharp_lq64d343 = {
.num_modes = 1,
.lccr0 = 0x07800080,
.lccr3 = 0x00400000,
- .pxafb_backlight_power = lpd270_backlight_power,
};
/* 10.4" TFT VGA (LoLo display number 7) */
@@ -361,7 +355,6 @@ static struct pxafb_mach_info sharp_lq10d368 = {
.num_modes = 1,
.lccr0 = 0x07800080,
.lccr3 = 0x00400000,
- .pxafb_backlight_power = lpd270_backlight_power,
};
/* 3.5" TFT QVGA (LoLo display number 8) */
@@ -384,7 +377,6 @@ static struct pxafb_mach_info sharp_lq035q7db02_20 = {
.num_modes = 1,
.lccr0 = 0x07800080,
.lccr3 = 0x00400000,
- .pxafb_backlight_power = lpd270_backlight_power,
};
static struct pxafb_mach_info *lpd270_lcd_to_use;
@@ -414,7 +406,7 @@ __setup("lcd=", lpd270_set_lcd);
static struct platform_device *platform_devices[] __initdata = {
&smc91x_device,
- &lpd270_audio_device,
+ &lpd270_backlight_device,
&lpd270_flash_device[0],
&lpd270_flash_device[1],
};
@@ -454,9 +446,12 @@ static void __init lpd270_init(void)
* On LogicPD PXA270, we route AC97_SYSCLK via GPIO45.
*/
pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
+ pxa_gpio_mode(GPIO16_PWM0_MD);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+ pxa_set_ac97_info(NULL);
+
if (lpd270_lcd_to_use != NULL)
set_pxa_fb_info(lpd270_lcd_to_use);
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 7b9bdd0c6665..a3fae4139203 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -43,6 +43,7 @@
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/mfp-pxa25x.h>
+#include <asm/arch/audio.h>
#include <asm/arch/lubbock.h>
#include <asm/arch/udc.h>
#include <asm/arch/irda.h>
@@ -196,11 +197,6 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
// no D+ pullup; lubbock can't connect/disconnect in software
};
-static struct platform_device lub_audio_device = {
- .name = "pxa2xx-ac97",
- .id = -1,
-};
-
static struct resource sa1111_resources[] = {
[0] = {
.start = 0x10000000,
@@ -368,7 +364,6 @@ static struct platform_device lubbock_flash_device[2] = {
static struct platform_device *devices[] __initdata = {
&sa1111_device,
- &lub_audio_device,
&smc91x_device,
&lubbock_flash_device[0],
&lubbock_flash_device[1],
@@ -494,6 +489,7 @@ static void __init lubbock_init(void)
set_pxa_fb_info(&sharp_lm8v31);
pxa_set_mci_info(&lubbock_mci_platform_data);
pxa_set_ficp_info(&lubbock_ficp_platform_data);
+ pxa_set_ac97_info(NULL);
lubbock_flash_data[0].width = lubbock_flash_data[1].width =
(BOOT_DEF & 1) ? 2 : 4;
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index badba064dc04..01b2fa790217 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -25,6 +25,7 @@
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
#include <asm/gpio.h>
#include <asm/hardware.h>
@@ -33,12 +34,14 @@
#include <asm/arch/magician.h>
#include <asm/arch/mfp-pxa27x.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/i2c.h>
#include <asm/arch/mmc.h>
#include <asm/arch/irda.h>
#include <asm/arch/ohci.h>
+#include "devices.h"
#include "generic.h"
static unsigned long magician_pin_config[] = {
@@ -348,40 +351,58 @@ static struct pxafb_mach_info samsung_info = {
* Backlight
*/
-static void magician_set_bl_intensity(int intensity)
+static int magician_backlight_init(struct device *dev)
{
- if (intensity) {
- PWM_CTRL0 = 1;
- PWM_PERVAL0 = 0xc8;
- if (intensity > 0xc7) {
- PWM_PWDUTY0 = intensity - 0x48;
- gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
- } else {
- PWM_PWDUTY0 = intensity;
- gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 0);
- }
- gpio_set_value(EGPIO_MAGICIAN_BL_POWER, 1);
- pxa_set_cken(CKEN_PWM0, 1);
+ int ret;
+
+ ret = gpio_request(EGPIO_MAGICIAN_BL_POWER, "BL_POWER");
+ if (ret)
+ goto err;
+ ret = gpio_request(EGPIO_MAGICIAN_BL_POWER2, "BL_POWER2");
+ if (ret)
+ goto err2;
+ return 0;
+
+err2:
+ gpio_free(EGPIO_MAGICIAN_BL_POWER);
+err:
+ return ret;
+}
+
+static int magician_backlight_notify(int brightness)
+{
+ gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
+ if (brightness >= 200) {
+ gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
+ return brightness - 72;
} else {
- /* PWM_PWDUTY0 = intensity; */
- gpio_set_value(EGPIO_MAGICIAN_BL_POWER, 0);
- pxa_set_cken(CKEN_PWM0, 0);
+ gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 0);
+ return brightness;
}
}
-static struct generic_bl_info backlight_info = {
- .default_intensity = 0x64,
- .limit_mask = 0x0b,
- .max_intensity = 0xc7+0x48,
- .set_bl_intensity = magician_set_bl_intensity,
+static void magician_backlight_exit(struct device *dev)
+{
+ gpio_free(EGPIO_MAGICIAN_BL_POWER);
+ gpio_free(EGPIO_MAGICIAN_BL_POWER2);
+}
+
+static struct platform_pwm_backlight_data backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 272,
+ .dft_brightness = 100,
+ .pwm_period_ns = 30923,
+ .init = magician_backlight_init,
+ .notify = magician_backlight_notify,
+ .exit = magician_backlight_exit,
};
static struct platform_device backlight = {
- .name = "generic-bl",
+ .name = "pwm-backlight",
.dev = {
- .platform_data = &backlight_info,
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &backlight_data,
},
- .id = -1,
};
/*
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 7399fb34da4e..f2e9e7c4da8e 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -23,9 +23,9 @@
#include <linux/ioport.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <linux/backlight.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
+#include <linux/pwm_backlight.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -280,12 +280,6 @@ static pxa2xx_audio_ops_t mst_audio_ops = {
.resume = mst_audio_resume,
};
-static struct platform_device mst_audio_device = {
- .name = "pxa2xx-ac97",
- .id = -1,
- .dev = { .platform_data = &mst_audio_ops },
-};
-
static struct resource flash_resources[] = {
[0] = {
.start = PXA_CS0_PHYS,
@@ -349,56 +343,27 @@ static struct platform_device mst_flash_device[2] = {
},
};
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
-static int mainstone_backlight_update_status(struct backlight_device *bl)
-{
- int brightness = bl->props.brightness;
-
- if (bl->props.power != FB_BLANK_UNBLANK ||
- bl->props.fb_blank != FB_BLANK_UNBLANK)
- brightness = 0;
-
- if (brightness != 0)
- pxa_set_cken(CKEN_PWM0, 1);
-
- PWM_CTRL0 = 0;
- PWM_PWDUTY0 = brightness;
- PWM_PERVAL0 = bl->props.max_brightness;
-
- if (brightness == 0)
- pxa_set_cken(CKEN_PWM0, 0);
- return 0; /* pointless return value */
-}
-
-static int mainstone_backlight_get_brightness(struct backlight_device *bl)
-{
- return PWM_PWDUTY0;
-}
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct platform_pwm_backlight_data mainstone_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 1023,
+ .dft_brightness = 1023,
+ .pwm_period_ns = 78770,
+};
-static /*const*/ struct backlight_ops mainstone_backlight_ops = {
- .update_status = mainstone_backlight_update_status,
- .get_brightness = mainstone_backlight_get_brightness,
+static struct platform_device mainstone_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &mainstone_backlight_data,
+ },
};
static void __init mainstone_backlight_register(void)
{
- struct backlight_device *bl;
-
- bl = backlight_device_register("mainstone-bl", &pxa_device_fb.dev,
- NULL, &mainstone_backlight_ops);
- if (IS_ERR(bl)) {
- printk(KERN_ERR "mainstone: unable to register backlight: %ld\n",
- PTR_ERR(bl));
- return;
- }
-
- /*
- * broken design - register-then-setup interfaces are
- * utterly broken by definition.
- */
- bl->props.max_brightness = 1023;
- bl->props.brightness = 1023;
- backlight_update_status(bl);
+ int ret = platform_device_register(&mainstone_backlight_device);
+ if (ret)
+ printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret);
}
#else
#define mainstone_backlight_register() do { } while (0)
@@ -528,7 +493,6 @@ static struct platform_device mst_gpio_keys_device = {
static struct platform_device *platform_devices[] __initdata = {
&smc91x_device,
- &mst_audio_device,
&mst_flash_device[0],
&mst_flash_device[1],
&mst_gpio_keys_device,
@@ -638,6 +602,7 @@ static void __init mainstone_init(void)
pxa_set_ficp_info(&mainstone_ficp_platform_data);
pxa_set_ohci_info(&mainstone_ohci_platform_data);
pxa_set_i2c_info(NULL);
+ pxa_set_ac97_info(&mst_audio_ops);
mainstone_init_keypad();
}
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 22097a1707cc..d1cdb4ecb0b8 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -20,6 +20,7 @@
#include <asm/arch/hardware.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/mfp-pxa2xx.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 49d951db0f3d..5d87c7c866e4 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -24,6 +24,7 @@
#include <linux/platform_device.h>
#include <linux/ide.h>
#include <linux/i2c.h>
+#include <linux/pwm_backlight.h>
#include <media/soc_camera.h>
@@ -33,12 +34,103 @@
#include <asm/mach/map.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
+#include <asm/arch/audio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/ohci.h>
#include <asm/arch/pcm990_baseboard.h>
+#include <asm/arch/pxafb.h>
+
+#include "devices.h"
/*
- * The PCM-990 development baseboard uses PCM-027's hardeware in the
+ * pcm990_lcd_power - control power supply to the LCD
+ * @on: 0 = switch off, 1 = switch on
+ *
+ * Called by the pxafb driver
+ */
+#ifndef CONFIG_PCM990_DISPLAY_NONE
+static void pcm990_lcd_power(int on, struct fb_var_screeninfo *var)
+{
+ if (on) {
+ /* enable LCD-Latches
+ * power on LCD
+ */
+ __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) =
+ PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON;
+ } else {
+ /* disable LCD-Latches
+ * power off LCD
+ */
+ __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) = 0x00;
+ }
+}
+#endif
+
+#if defined(CONFIG_PCM990_DISPLAY_SHARP)
+static struct pxafb_mode_info fb_info_sharp_lq084v1dg21 = {
+ .pixclock = 28000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .hsync_len = 20,
+ .left_margin = 103,
+ .right_margin = 47,
+ .vsync_len = 6,
+ .upper_margin = 28,
+ .lower_margin = 5,
+ .sync = 0,
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info pcm990_fbinfo __initdata = {
+ .modes = &fb_info_sharp_lq084v1dg21,
+ .num_modes = 1,
+ .lccr0 = LCCR0_PAS,
+ .lccr3 = LCCR3_PCP,
+ .pxafb_lcd_power = pcm990_lcd_power,
+};
+#elif defined(CONFIG_PCM990_DISPLAY_NEC)
+struct pxafb_mode_info fb_info_nec_nl6448bc20_18d = {
+ .pixclock = 39720,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .hsync_len = 32,
+ .left_margin = 16,
+ .right_margin = 48,
+ .vsync_len = 2,
+ .upper_margin = 12,
+ .lower_margin = 17,
+ .sync = 0,
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info pcm990_fbinfo __initdata = {
+ .modes = &fb_info_nec_nl6448bc20_18d,
+ .num_modes = 1,
+ .lccr0 = LCCR0_Act,
+ .lccr3 = LCCR3_PixFlEdg,
+ .pxafb_lcd_power = pcm990_lcd_power,
+};
+#endif
+
+static struct platform_pwm_backlight_data pcm990_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 1023,
+ .dft_brightness = 1023,
+ .pwm_period_ns = 78770,
+};
+
+static struct platform_device pcm990_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &pcm990_backlight_data,
+ },
+};
+
+/*
+ * The PCM-990 development baseboard uses PCM-027's hardware in the
* following way:
*
* - LCD support is in use
@@ -333,36 +425,6 @@ static struct i2c_board_info __initdata pcm990_i2c_devices[] = {
#endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */
/*
- * AC97 support
- * Note: The connected AC97 mixer also reports interrupts at PCM990_AC97_IRQ
- */
-static struct resource pxa27x_ac97_resources[] = {
- [0] = {
- .start = 0x40500000,
- .end = 0x40500000 + 0xfff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_AC97,
- .end = IRQ_AC97,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 pxa_ac97_dmamask = 0xffffffffUL;
-
-static struct platform_device pxa27x_device_ac97 = {
- .name = "pxa2xx-ac97",
- .id = -1,
- .dev = {
- .dma_mask = &pxa_ac97_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(pxa27x_ac97_resources),
- .resource = pxa27x_ac97_resources,
-};
-
-/*
* enable generic access to the base board control CPLDs U6 and U7
*/
static struct map_desc pcm990_io_desc[] __initdata = {
@@ -393,7 +455,11 @@ void __init pcm990_baseboard_init(void)
/* register CPLD's IRQ controller */
pcm990_init_irq();
- platform_device_register(&pxa27x_device_ac97);
+#ifndef CONFIG_PCM990_DISPLAY_NONE
+ set_pxa_fb_info(&pcm990_fbinfo);
+#endif
+ pxa_gpio_mode(GPIO16_PWM0_MD);
+ platform_device_register(&pcm990_backlight_device);
/* MMC */
pxa_set_mci_info(&pcm990_mci_platform_data);
@@ -402,6 +468,7 @@ void __init pcm990_baseboard_init(void)
pxa_set_ohci_info(&pcm990_ohci_platform_data);
pxa_set_i2c_info(NULL);
+ pxa_set_ac97_info(NULL);
#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
pxa_set_camera_info(&pcm990_pxacamera_platform_data);
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 0b30f25cff3c..f81c10cafd48 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -32,6 +32,7 @@
#include <asm/mach/irq.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/udc.h>
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c
new file mode 100644
index 000000000000..ce28cd9fed16
--- /dev/null
+++ b/arch/arm/mach-pxa/pwm.c
@@ -0,0 +1,319 @@
+/*
+ * linux/arch/arm/mach-pxa/pwm.c
+ *
+ * simple driver for PWM (Pulse Width Modulator) controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * 2008-02-13 initial version
+ * eric miao <eric.miao@marvell.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <asm/div64.h>
+#include <asm/arch/pxa-regs.h>
+
+/* PWM registers and bits definitions */
+#define PWMCR (0x00)
+#define PWMDCR (0x04)
+#define PWMPCR (0x08)
+
+#define PWMCR_SD (1 << 6)
+#define PWMDCR_FD (1 << 10)
+
+struct pwm_device {
+ struct list_head node;
+ struct platform_device *pdev;
+
+ const char *label;
+ struct clk *clk;
+ int clk_enabled;
+ void __iomem *mmio_base;
+
+ unsigned int use_count;
+ unsigned int pwm_id;
+};
+
+/*
+ * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
+ * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+ */
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+ unsigned long long c;
+ unsigned long period_cycles, prescale, pv, dc;
+
+ if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
+ return -EINVAL;
+
+ c = clk_get_rate(pwm->clk);
+ c = c * period_ns;
+ do_div(c, 1000000000);
+ period_cycles = c;
+
+ if (period_cycles < 0)
+ period_cycles = 1;
+ prescale = (period_cycles - 1) / 1024;
+ pv = period_cycles / (prescale + 1) - 1;
+
+ if (prescale > 63)
+ return -EINVAL;
+
+ if (duty_ns == period_ns)
+ dc = PWMDCR_FD;
+ else
+ dc = (pv + 1) * duty_ns / period_ns;
+
+ /* NOTE: the clock to PWM has to be enabled first
+ * before writing to the registers
+ */
+ clk_enable(pwm->clk);
+ __raw_writel(prescale, pwm->mmio_base + PWMCR);
+ __raw_writel(dc, pwm->mmio_base + PWMDCR);
+ __raw_writel(pv, pwm->mmio_base + PWMPCR);
+ clk_disable(pwm->clk);
+
+ return 0;
+}
+EXPORT_SYMBOL(pwm_config);
+
+int pwm_enable(struct pwm_device *pwm)
+{
+ int rc = 0;
+
+ if (!pwm->clk_enabled) {
+ rc = clk_enable(pwm->clk);
+ if (!rc)
+ pwm->clk_enabled = 1;
+ }
+ return rc;
+}
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+ if (pwm->clk_enabled) {
+ clk_disable(pwm->clk);
+ pwm->clk_enabled = 0;
+ }
+}
+EXPORT_SYMBOL(pwm_disable);
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+ struct pwm_device *pwm;
+ int found = 0;
+
+ mutex_lock(&pwm_lock);
+
+ list_for_each_entry(pwm, &pwm_list, node) {
+ if (pwm->pwm_id == pwm_id) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (found) {
+ if (pwm->use_count == 0) {
+ pwm->use_count++;
+ pwm->label = label;
+ } else
+ pwm = ERR_PTR(-EBUSY);
+ } else
+ pwm = ERR_PTR(-ENOENT);
+
+ mutex_unlock(&pwm_lock);
+ return pwm;
+}
+EXPORT_SYMBOL(pwm_request);
+
+void pwm_free(struct pwm_device *pwm)
+{
+ mutex_lock(&pwm_lock);
+
+ if (pwm->use_count) {
+ pwm->use_count--;
+ pwm->label = NULL;
+ } else
+ pr_warning("PWM device already freed\n");
+
+ mutex_unlock(&pwm_lock);
+}
+EXPORT_SYMBOL(pwm_free);
+
+static inline void __add_pwm(struct pwm_device *pwm)
+{
+ mutex_lock(&pwm_lock);
+ list_add_tail(&pwm->node, &pwm_list);
+ mutex_unlock(&pwm_lock);
+}
+
+static struct pwm_device *pwm_probe(struct platform_device *pdev,
+ unsigned int pwm_id, struct pwm_device *parent_pwm)
+{
+ struct pwm_device *pwm;
+ struct resource *r;
+ int ret = 0;
+
+ pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+ if (pwm == NULL) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ pwm->clk = clk_get(&pdev->dev, "PWMCLK");
+ if (IS_ERR(pwm->clk)) {
+ ret = PTR_ERR(pwm->clk);
+ goto err_free;
+ }
+ pwm->clk_enabled = 0;
+
+ pwm->use_count = 0;
+ pwm->pwm_id = pwm_id;
+ pwm->pdev = pdev;
+
+ if (parent_pwm != NULL) {
+ /* registers for the second PWM has offset of 0x10 */
+ pwm->mmio_base = parent_pwm->mmio_base + 0x10;
+ __add_pwm(pwm);
+ return pwm;
+ }
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "no memory resource defined\n");
+ ret = -ENODEV;
+ goto err_free_clk;
+ }
+
+ r = request_mem_region(r->start, r->end - r->start + 1, pdev->name);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "failed to request memory resource\n");
+ ret = -EBUSY;
+ goto err_free_clk;
+ }
+
+ pwm->mmio_base = ioremap(r->start, r->end - r->start + 1);
+ if (pwm->mmio_base == NULL) {
+ dev_err(&pdev->dev, "failed to ioremap() registers\n");
+ ret = -ENODEV;
+ goto err_free_mem;
+ }
+
+ __add_pwm(pwm);
+ platform_set_drvdata(pdev, pwm);
+ return pwm;
+
+err_free_mem:
+ release_mem_region(r->start, r->end - r->start + 1);
+err_free_clk:
+ clk_put(pwm->clk);
+err_free:
+ kfree(pwm);
+ return ERR_PTR(ret);
+}
+
+static int __devinit pxa25x_pwm_probe(struct platform_device *pdev)
+{
+ struct pwm_device *pwm = pwm_probe(pdev, pdev->id, NULL);
+
+ if (IS_ERR(pwm))
+ return PTR_ERR(pwm);
+
+ return 0;
+}
+
+static int __devinit pxa27x_pwm_probe(struct platform_device *pdev)
+{
+ struct pwm_device *pwm;
+
+ pwm = pwm_probe(pdev, pdev->id, NULL);
+ if (IS_ERR(pwm))
+ return PTR_ERR(pwm);
+
+ pwm = pwm_probe(pdev, pdev->id + 2, pwm);
+ if (IS_ERR(pwm))
+ return PTR_ERR(pwm);
+
+ return 0;
+}
+
+static int __devexit pwm_remove(struct platform_device *pdev)
+{
+ struct pwm_device *pwm;
+ struct resource *r;
+
+ pwm = platform_get_drvdata(pdev);
+ if (pwm == NULL)
+ return -ENODEV;
+
+ mutex_lock(&pwm_lock);
+ list_del(&pwm->node);
+ mutex_unlock(&pwm_lock);
+
+ iounmap(pwm->mmio_base);
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(r->start, r->end - r->start + 1);
+
+ clk_put(pwm->clk);
+ kfree(pwm);
+ return 0;
+}
+
+static struct platform_driver pxa25x_pwm_driver = {
+ .driver = {
+ .name = "pxa25x-pwm",
+ },
+ .probe = pxa25x_pwm_probe,
+ .remove = __devexit_p(pwm_remove),
+};
+
+static struct platform_driver pxa27x_pwm_driver = {
+ .driver = {
+ .name = "pxa27x-pwm",
+ },
+ .probe = pxa27x_pwm_probe,
+ .remove = __devexit_p(pwm_remove),
+};
+
+static int __init pwm_init(void)
+{
+ int ret = 0;
+
+ ret = platform_driver_register(&pxa25x_pwm_driver);
+ if (ret) {
+ printk(KERN_ERR "failed to register pxa25x_pwm_driver\n");
+ return ret;
+ }
+
+ ret = platform_driver_register(&pxa27x_pwm_driver);
+ if (ret) {
+ printk(KERN_ERR "failed to register pxa27x_pwm_driver\n");
+ return ret;
+ }
+
+ return ret;
+}
+arch_initcall(pwm_init);
+
+static void __exit pwm_exit(void)
+{
+ platform_driver_unregister(&pxa25x_pwm_driver);
+ platform_driver_unregister(&pxa27x_pwm_driver);
+}
+module_exit(pwm_exit);
+
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index e5b417d14bb0..4cd50e3005e9 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -26,6 +26,7 @@
#include <asm/hardware.h>
#include <asm/arch/irqs.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/mfp-pxa25x.h>
#include <asm/arch/pm.h>
#include <asm/arch/dma.h>
@@ -117,29 +118,35 @@ static struct clk pxa25x_hwuart_clk =
INIT_CKEN("UARTCLK", HWUART, 14745600, 1, &pxa_device_hwuart.dev)
;
+/*
+ * PXA 2xx clock declarations. Order is important (see aliases below)
+ * Please be careful not to disrupt the ordering.
+ */
static struct clk pxa25x_clks[] = {
INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev),
INIT_CKEN("UARTCLK", FFUART, 14745600, 1, &pxa_device_ffuart.dev),
INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL),
- INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa_device_udc.dev),
+ INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa25x_device_udc.dev),
INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev),
INIT_CKEN("SSPCLK", SSP, 3686400, 0, &pxa25x_device_ssp.dev),
INIT_CKEN("SSPCLK", NSSP, 3686400, 0, &pxa25x_device_nssp.dev),
INIT_CKEN("SSPCLK", ASSP, 3686400, 0, &pxa25x_device_assp.dev),
+ INIT_CKEN("PWMCLK", PWM0, 3686400, 0, &pxa25x_device_pwm0.dev),
+ INIT_CKEN("PWMCLK", PWM1, 3686400, 0, &pxa25x_device_pwm1.dev),
INIT_CKEN("AC97CLK", AC97, 24576000, 0, NULL),
/*
- INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL),
- INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL),
INIT_CKEN("I2SCLK", I2S, 14745600, 0, NULL),
*/
INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
};
+static struct clk gpio7_clk = INIT_CKOTHER("GPIO7_CK", &pxa25x_clks[4], NULL);
+
#ifdef CONFIG_PM
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
@@ -260,7 +267,7 @@ void __init pxa25x_init_irq(void)
}
static struct platform_device *pxa25x_devices[] __initdata = {
- &pxa_device_udc,
+ &pxa25x_device_udc,
&pxa_device_ffuart,
&pxa_device_btuart,
&pxa_device_stuart,
@@ -269,6 +276,8 @@ static struct platform_device *pxa25x_devices[] __initdata = {
&pxa25x_device_ssp,
&pxa25x_device_nssp,
&pxa25x_device_assp,
+ &pxa25x_device_pwm0,
+ &pxa25x_device_pwm1,
};
static struct sys_device pxa25x_sysdev[] = {
@@ -311,6 +320,8 @@ static int __init pxa25x_init(void)
if (cpu_is_pxa25x())
ret = platform_device_register(&pxa_device_hwuart);
+ clks_register(&gpio7_clk, 1);
+
return ret;
}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 7e945836e129..d5d14ea33f27 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -146,7 +146,7 @@ static struct clk pxa27x_clks[] = {
INIT_CKEN("I2SCLK", I2S, 14682000, 0, &pxa_device_i2s.dev),
INIT_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev),
- INIT_CKEN("UDCCLK", USB, 48000000, 5, &pxa_device_udc.dev),
+ INIT_CKEN("UDCCLK", USB, 48000000, 5, &pxa27x_device_udc.dev),
INIT_CKEN("MMCCLK", MMC, 19500000, 0, &pxa_device_mci.dev),
INIT_CKEN("FICPCLK", FICP, 48000000, 0, &pxa_device_ficp.dev),
@@ -157,12 +157,13 @@ static struct clk pxa27x_clks[] = {
INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
INIT_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
+ INIT_CKEN("PWMCLK", PWM0, 13000000, 0, &pxa27x_device_pwm0.dev),
+ INIT_CKEN("PWMCLK", PWM1, 13000000, 0, &pxa27x_device_pwm1.dev),
INIT_CKEN("AC97CLK", AC97, 24576000, 0, NULL),
INIT_CKEN("AC97CONFCLK", AC97CONF, 24576000, 0, NULL),
/*
- INIT_CKEN("PWMCLK", PWM0, 13000000, 0, NULL),
INIT_CKEN("MSLCLK", MSL, 48000000, 0, NULL),
INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL),
INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL),
@@ -349,11 +350,14 @@ struct platform_device pxa27x_device_i2c_power = {
void __init pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info)
{
+ local_irq_disable();
+ PCFR |= PCFR_PI2CEN;
+ local_irq_enable();
pxa27x_device_i2c_power.dev.platform_data = info;
}
static struct platform_device *devices[] __initdata = {
- &pxa_device_udc,
+ &pxa27x_device_udc,
&pxa_device_ffuart,
&pxa_device_btuart,
&pxa_device_stuart,
@@ -363,6 +367,8 @@ static struct platform_device *devices[] __initdata = {
&pxa27x_device_ssp1,
&pxa27x_device_ssp2,
&pxa27x_device_ssp3,
+ &pxa27x_device_pwm0,
+ &pxa27x_device_pwm1,
};
static struct sys_device pxa27x_sysdev[] = {
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
new file mode 100644
index 000000000000..d4f6415e8413
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -0,0 +1,46 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa2xx.c
+ *
+ * code specific to pxa2xx
+ *
+ * Copyright (C) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+
+#include <asm/arch/mfp-pxa2xx.h>
+#include <asm/arch/mfp-pxa25x.h>
+#include <asm/arch/irda.h>
+
+static unsigned long pxa2xx_mfp_fir[] = {
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+};
+
+static unsigned long pxa2xx_mfp_sir[] = {
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+};
+
+static unsigned long pxa2xx_mfp_off[] = {
+ GPIO46_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO47_GPIO | MFP_LPM_DRIVE_LOW,
+};
+
+void pxa2xx_transceiver_mode(struct device *dev, int mode)
+{
+ if (mode & IR_OFF) {
+ pxa2xx_mfp_config(pxa2xx_mfp_off, ARRAY_SIZE(pxa2xx_mfp_off));
+ } else if (mode & IR_SIRMODE) {
+ pxa2xx_mfp_config(pxa2xx_mfp_sir, ARRAY_SIZE(pxa2xx_mfp_sir));
+ } else if (mode & IR_FIRMODE) {
+ pxa2xx_mfp_config(pxa2xx_mfp_fir, ARRAY_SIZE(pxa2xx_mfp_fir));
+ } else
+ BUG();
+}
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 644550bfa330..15685d2b8f8c 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -231,7 +231,7 @@ static struct clk pxa3xx_clks[] = {
PXA3xx_CKEN("UARTCLK", STUART, 14857000, 1, NULL),
PXA3xx_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev),
- PXA3xx_CKEN("UDCCLK", UDC, 48000000, 5, &pxa_device_udc.dev),
+ PXA3xx_CKEN("UDCCLK", UDC, 48000000, 5, &pxa27x_device_udc.dev),
PXA3xx_CKEN("USBCLK", USBH, 48000000, 0, &pxa27x_device_ohci.dev),
PXA3xx_CKEN("KBDCLK", KEYPAD, 32768, 0, &pxa27x_device_keypad.dev),
@@ -239,6 +239,8 @@ static struct clk pxa3xx_clks[] = {
PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
PXA3xx_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
PXA3xx_CKEN("SSPCLK", SSP4, 13000000, 0, &pxa3xx_device_ssp4.dev),
+ PXA3xx_CKEN("PWMCLK", PWM0, 13000000, 0, &pxa27x_device_pwm0.dev),
+ PXA3xx_CKEN("PWMCLK", PWM1, 13000000, 0, &pxa27x_device_pwm1.dev),
PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev),
PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev),
@@ -520,7 +522,7 @@ void __init pxa3xx_init_irq(void)
*/
static struct platform_device *devices[] __initdata = {
- &pxa_device_udc,
+/* &pxa_device_udc, The UDC driver is PXA25x only */
&pxa_device_ffuart,
&pxa_device_btuart,
&pxa_device_stuart,
@@ -530,6 +532,8 @@ static struct platform_device *devices[] __initdata = {
&pxa27x_device_ssp2,
&pxa27x_device_ssp3,
&pxa3xx_device_ssp4,
+ &pxa27x_device_pwm0,
+ &pxa27x_device_pwm1,
};
static struct sys_device pxa3xx_sysdev[] = {
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 23f050feb208..360354084ae4 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -26,6 +26,7 @@
#include <asm/arch/sharpsl.h>
#include <asm/arch/spitz.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
#include "sharpsl.h"
@@ -207,7 +208,9 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = {
.read_devdata = spitzpm_read_devdata,
.charger_wakeup = spitz_charger_wakeup,
.should_wakeup = spitz_should_wakeup,
+#ifdef CONFIG_BACKLIGHT_CORGI
.backlight_limit = corgibl_limit_intensity,
+#endif
.charge_on_volt = SHARPSL_CHARGE_ON_VOLT,
.charge_on_temp = SHARPSL_CHARGE_ON_TEMP,
.charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,
@@ -229,6 +232,10 @@ static int __devinit spitzpm_init(void)
{
int ret;
+ if (!machine_is_spitz() && !machine_is_akita()
+ && !machine_is_borzoi())
+ return -ENODEV;
+
spitzpm_device = platform_device_alloc("sharpsl-pm", -1);
if (!spitzpm_device)
return -ENOMEM;
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index 167412e6bec8..40bb70eff3fe 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -14,6 +14,7 @@
#include <asm/hardware.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
.text
@@ -35,20 +36,20 @@ ENTRY(pxa_cpu_standby)
#ifdef CONFIG_PXA3xx
-#define MDCNFG 0x0000
-#define MDCNFG_DMCEN (1 << 30)
-#define DDR_HCAL 0x0060
-#define DDR_HCAL_HCRNG 0x1f
-#define DDR_HCAL_HCPROG (1 << 28)
-#define DDR_HCAL_HCEN (1 << 31)
-#define DMCIER 0x0070
-#define DMCIER_EDLP (1 << 29)
-#define DMCISR 0x0078
-#define RCOMP 0x0100
-#define RCOMP_SWEVAL (1 << 31)
+#define PXA3_MDCNFG 0x0000
+#define PXA3_MDCNFG_DMCEN (1 << 30)
+#define PXA3_DDR_HCAL 0x0060
+#define PXA3_DDR_HCAL_HCRNG 0x1f
+#define PXA3_DDR_HCAL_HCPROG (1 << 28)
+#define PXA3_DDR_HCAL_HCEN (1 << 31)
+#define PXA3_DMCIER 0x0070
+#define PXA3_DMCIER_EDLP (1 << 29)
+#define PXA3_DMCISR 0x0078
+#define PXA3_RCOMP 0x0100
+#define PXA3_RCOMP_SWEVAL (1 << 31)
ENTRY(pm_enter_standby_start)
- mov r1, #0xf6000000 @ DMEMC_REG_BASE (MDCNFG)
+ mov r1, #0xf6000000 @ DMEMC_REG_BASE (PXA3_MDCNFG)
add r1, r1, #0x00100000
/*
@@ -59,54 +60,54 @@ ENTRY(pm_enter_standby_start)
* This also means that only the dynamic memory controller
* can be reliably accessed in the code following standby.
*/
- ldr r2, [r1] @ Dummy read MDCNFG
+ ldr r2, [r1] @ Dummy read PXA3_MDCNFG
mcr p14, 0, r0, c7, c0, 0
.rept 8
nop
.endr
- ldr r0, [r1, #DDR_HCAL] @ Clear (and wait for) HCEN
- bic r0, r0, #DDR_HCAL_HCEN
- str r0, [r1, #DDR_HCAL]
-1: ldr r0, [r1, #DDR_HCAL]
- tst r0, #DDR_HCAL_HCEN
+ ldr r0, [r1, #PXA3_DDR_HCAL] @ Clear (and wait for) HCEN
+ bic r0, r0, #PXA3_DDR_HCAL_HCEN
+ str r0, [r1, #PXA3_DDR_HCAL]
+1: ldr r0, [r1, #PXA3_DDR_HCAL]
+ tst r0, #PXA3_DDR_HCAL_HCEN
bne 1b
- ldr r0, [r1, #RCOMP] @ Initiate RCOMP
- orr r0, r0, #RCOMP_SWEVAL
- str r0, [r1, #RCOMP]
+ ldr r0, [r1, #PXA3_RCOMP] @ Initiate RCOMP
+ orr r0, r0, #PXA3_RCOMP_SWEVAL
+ str r0, [r1, #PXA3_RCOMP]
- mov r0, #~0 @ Clear interrupts
- str r0, [r1, #DMCISR]
+ mov r0, #~0 @ Clear interrupts
+ str r0, [r1, #PXA3_DMCISR]
- ldr r0, [r1, #DMCIER] @ set DMIER[EDLP]
- orr r0, r0, #DMCIER_EDLP
- str r0, [r1, #DMCIER]
+ ldr r0, [r1, #PXA3_DMCIER] @ set DMIER[EDLP]
+ orr r0, r0, #PXA3_DMCIER_EDLP
+ str r0, [r1, #PXA3_DMCIER]
- ldr r0, [r1, #DDR_HCAL] @ clear HCRNG, set HCPROG, HCEN
- bic r0, r0, #DDR_HCAL_HCRNG
- orr r0, r0, #DDR_HCAL_HCEN | DDR_HCAL_HCPROG
- str r0, [r1, #DDR_HCAL]
+ ldr r0, [r1, #PXA3_DDR_HCAL] @ clear HCRNG, set HCPROG, HCEN
+ bic r0, r0, #PXA3_DDR_HCAL_HCRNG
+ orr r0, r0, #PXA3_DDR_HCAL_HCEN | PXA3_DDR_HCAL_HCPROG
+ str r0, [r1, #PXA3_DDR_HCAL]
-1: ldr r0, [r1, #DMCISR]
- tst r0, #DMCIER_EDLP
+1: ldr r0, [r1, #PXA3_DMCISR]
+ tst r0, #PXA3_DMCIER_EDLP
beq 1b
- ldr r0, [r1, #MDCNFG] @ set MDCNFG[DMCEN]
- orr r0, r0, #MDCNFG_DMCEN
- str r0, [r1, #MDCNFG]
-1: ldr r0, [r1, #MDCNFG]
- tst r0, #MDCNFG_DMCEN
+ ldr r0, [r1, #PXA3_MDCNFG] @ set PXA3_MDCNFG[DMCEN]
+ orr r0, r0, #PXA3_MDCNFG_DMCEN
+ str r0, [r1, #PXA3_MDCNFG]
+1: ldr r0, [r1, #PXA3_MDCNFG]
+ tst r0, #PXA3_MDCNFG_DMCEN
beq 1b
- ldr r0, [r1, #DDR_HCAL] @ set DDR_HCAL[HCRNG]
+ ldr r0, [r1, #PXA3_DDR_HCAL] @ set PXA3_DDR_HCAL[HCRNG]
orr r0, r0, #2 @ HCRNG
- str r0, [r1, #DDR_HCAL]
+ str r0, [r1, #PXA3_DDR_HCAL]
- ldr r0, [r1, #DMCIER] @ Clear the interrupt
+ ldr r0, [r1, #PXA3_DMCIER] @ Clear the interrupt
bic r0, r0, #0x20000000
- str r0, [r1, #DMCIER]
+ str r0, [r1, #PXA3_DMCIER]
mov pc, lr
ENTRY(pm_enter_standby_end)
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 931885d86b91..61e244023089 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -41,6 +41,7 @@
#include <asm/mach/flash.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
#include <asm/arch/trizeps4.h>
#include <asm/arch/audio.h>
@@ -175,19 +176,10 @@ static struct platform_device uart_devices = {
.resource = NULL,
};
-/********************************************************************************************
- * PXA270 ac97 sound codec
- ********************************************************************************************/
-static struct platform_device ac97_audio_device = {
- .name = "pxa2xx-ac97",
- .id = -1,
-};
-
static struct platform_device * trizeps4_devices[] __initdata = {
&flash_device,
&uart_devices,
&dm9000_device,
- &ac97_audio_device,
};
#ifdef CONFIG_MACH_TRIZEPS4_CONXS
@@ -438,6 +430,7 @@ static void __init trizeps4_init(void)
pxa_set_mci_info(&trizeps4_mci_platform_data);
pxa_set_ficp_info(&trizeps4_ficp_platform_data);
pxa_set_ohci_info(&trizeps4_ohci_platform_data);
+ pxa_set_ac97_info(NULL);
}
static void __init trizeps4_map_io(void)
@@ -487,6 +480,7 @@ static void __init trizeps4_map_io(void)
ConXS_BCR = trizeps_conxs_bcr;
#endif
+#warning FIXME - accessing PM registers directly is deprecated
PWER = 0x00000002;
PFER = 0x00000000;
PRER = 0x00000002;
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 4a0028087ea6..66b446ca273d 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -18,22 +18,24 @@
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/hardware.h>
+#include <asm/arch/audio.h>
#include <asm/arch/gpio.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/zylonite.h>
#include <asm/arch/mmc.h>
#include <asm/arch/pxa27x_keypad.h>
+#include "devices.h"
#include "generic.h"
#define MAX_SLOTS 3
struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
-int gpio_backlight;
int gpio_eth_irq;
int wm9713_irq;
@@ -62,10 +64,20 @@ static struct platform_device smc91x_device = {
};
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static void zylonite_backlight_power(int on)
-{
- gpio_set_value(gpio_backlight, on);
-}
+static struct platform_pwm_backlight_data zylonite_backlight_data = {
+ .pwm_id = 3,
+ .max_brightness = 100,
+ .dft_brightness = 100,
+ .pwm_period_ns = 10000,
+};
+
+static struct platform_device zylonite_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm1.dev,
+ .platform_data = &zylonite_backlight_data,
+ },
+};
static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
.pixclock = 110000,
@@ -98,7 +110,6 @@ static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
static struct pxafb_mach_info zylonite_toshiba_lcd_info = {
.num_modes = 1,
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
- .pxafb_backlight_power = zylonite_backlight_power,
};
static struct pxafb_mode_info sharp_ls037_modes[] = {
@@ -134,13 +145,11 @@ static struct pxafb_mach_info zylonite_sharp_lcd_info = {
.modes = sharp_ls037_modes,
.num_modes = 2,
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
- .pxafb_backlight_power = zylonite_backlight_power,
};
static void __init zylonite_init_lcd(void)
{
- /* backlight GPIO: output, default on */
- gpio_direction_output(gpio_backlight, 1);
+ platform_device_register(&zylonite_backlight_device);
if (lcd_id & 0x20) {
set_pxa_fb_info(&zylonite_sharp_lcd_info);
@@ -329,6 +338,7 @@ static void __init zylonite_init(void)
smc91x_resources[1].end = gpio_to_irq(gpio_eth_irq);
platform_device_register(&smc91x_device);
+ pxa_set_ac97_info(NULL);
zylonite_init_lcd();
zylonite_init_mmc();
zylonite_init_keypad();
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 324fb9daae28..6f7ae972b8db 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -50,6 +50,7 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
GPIO75_LCD_BIAS,
GPIO76_LCD_VSYNC,
GPIO127_LCD_CS_N,
+ GPIO20_PWM3_OUT, /* backlight */
/* BTUART */
GPIO111_UART2_RTS,
@@ -200,9 +201,6 @@ void __init zylonite_pxa300_init(void)
/* detect LCD panel */
zylonite_detect_lcd_panel();
- /* GPIO pin assignment */
- gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO20);
-
/* MMC card detect & write protect for controller 0 */
zylonite_mmc_slot[0].gpio_cd = EXT_GPIO(0);
zylonite_mmc_slot[0].gpio_wp = EXT_GPIO(2);
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 193d07903b06..2b4fc34919ac 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -49,6 +49,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
GPIO15_2_LCD_LCLK,
GPIO16_2_LCD_PCLK,
GPIO17_2_LCD_BIAS,
+ GPIO14_PWM3_OUT, /* backlight */
/* FFUART */
GPIO41_UART1_RXD | MFP_LPM_EDGE_FALL,
@@ -187,7 +188,6 @@ void __init zylonite_pxa320_init(void)
zylonite_detect_lcd_panel();
/* GPIO pin assignment */
- gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO14);
gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO9);
/* MMC card detect & write protect for controller 0 */
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index cd3dc0834b3b..99fdc736698c 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -37,6 +37,17 @@ config S3C2410_CLOCK
help
Clock code for the S3C2410, and similar processors
+config SIMTEC_NOR
+ bool
+ help
+ Internal node to specify machine has simtec NOR mapping
+
+config MACH_BAST_IDE
+ bool
+ select HAVE_PATA_PLATFORM
+ help
+ Internal node for machines with an BAST style IDE
+ interface
menu "S3C2410 Machines"
@@ -61,15 +72,18 @@ config PM_H1940
Internal node for H1940 and related PM
config MACH_N30
- bool "Acer N30"
+ bool "Acer N30 family"
select CPU_S3C2410
help
- Say Y here if you are using the Acer N30
+ Say Y here if you want suppt for the Acer N30, Acer N35,
+ Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
select CPU_S3C2410
select PM_SIMTEC if PM
+ select SIMTEC_NOR
+ select MACH_BAST_IDE
select ISA
help
Say Y here if you are using the Simtec Electronics EB2410ITX
@@ -107,6 +121,8 @@ config MACH_TCT_HAMMER
config MACH_VR1000
bool "Thorcom VR1000"
select PM_SIMTEC if PM
+ select SIMTEC_NOR
+ select MACH_BAST_IDE
select CPU_S3C2410
help
Say Y here if you are using the Thorcom VR1000 board.
@@ -118,4 +134,3 @@ config MACH_QT2410
Say Y here if you are using the Armzone QT2410
endmenu
-
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index cabc13ce09e4..00f31f8c4e78 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -30,3 +30,11 @@ obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o
obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o
obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o
obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o
+
+# Common bits of machine support
+
+obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o
+
+# machine additions
+
+obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o
diff --git a/arch/arm/mach-s3c2410/bast-ide.c b/arch/arm/mach-s3c2410/bast-ide.c
new file mode 100644
index 000000000000..df95fe37cdc8
--- /dev/null
+++ b/arch/arm/mach-s3c2410/bast-ide.c
@@ -0,0 +1,112 @@
+/* linux/arch/arm/mach-s3c2410/bast-ide.c
+ *
+ * Copyright 2007 Simtec Electronics
+ * http://www.simtec.co.uk/products/EB2410ITX/
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/map.h>
+#include <asm/arch/bast-map.h>
+#include <asm/arch/bast-irq.h>
+
+/* IDE ports */
+
+static struct pata_platform_info bast_ide_platdata = {
+ .ioport_shift = 5,
+};
+
+#define IDE_CS S3C2410_CS5
+
+static struct resource bast_ide0_resource[] = {
+ [0] = {
+ .start = IDE_CS + BAST_PA_IDEPRI,
+ .end = IDE_CS + BAST_PA_IDEPRI + (8 * 0x20) - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20) ,
+ .end = IDE_CS + BAST_PA_IDEPRIAUX + (7 * 0x20) - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = IRQ_IDE0,
+ .end = IRQ_IDE0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bast_device_ide0 = {
+ .name = "pata_platform",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bast_ide0_resource),
+ .resource = bast_ide0_resource,
+ .dev = {
+ .platform_data = &bast_ide_platdata,
+ .coherent_dma_mask = ~0,
+ }
+
+};
+
+static struct resource bast_ide1_resource[] = {
+ [0] = {
+ .start = IDE_CS + BAST_PA_IDESEC,
+ .end = IDE_CS + BAST_PA_IDESEC + (8 * 0x20) - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20),
+ .end = IDE_CS + BAST_PA_IDESECAUX + (7 * 0x20) - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = IRQ_IDE1,
+ .end = IRQ_IDE1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bast_device_ide1 = {
+ .name = "pata_platform",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bast_ide1_resource),
+ .resource = bast_ide1_resource,
+ .dev = {
+ .platform_data = &bast_ide_platdata,
+ .coherent_dma_mask = ~0,
+ }
+};
+
+static struct platform_device *bast_ide_devices[] __initdata = {
+ &bast_device_ide0,
+ &bast_device_ide1,
+};
+
+static __init int bast_ide_init(void)
+{
+ if (machine_is_bast() || machine_is_vr1000())
+ return platform_add_devices(bast_ide_devices,
+ ARRAY_SIZE(bast_ide_devices));
+
+ return 0;
+}
+
+fs_initcall(bast_ide_init);
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 27f63d5d3a7b..965f27129707 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2410/mach-bast.c
*
- * Copyright (c) 2003-2005 Simtec Electronics
+ * Copyright (c) 2003-2005,2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* http://www.simtec.co.uk/products/EB2410ITX/
@@ -20,6 +20,8 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/dm9000.h>
+#include <linux/ata_platform.h>
+#include <linux/i2c.h>
#include <net/ax88796.h>
@@ -56,7 +58,9 @@
#include <asm/plat-s3c24xx/clock.h>
#include <asm/plat-s3c24xx/devs.h>
#include <asm/plat-s3c24xx/cpu.h>
+
#include "usb-simtec.h"
+#include "nor-simtec.h"
#define COPYRIGHT ", (c) 2004-2005 Simtec Electronics"
@@ -134,37 +138,21 @@ static struct map_desc bast_iodesc[] __initdata = {
{ VA_C2(BAST_VA_ISAIO), PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
{ VA_C2(BAST_VA_ISAMEM), PA_CS2(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
{ VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
- { VA_C2(BAST_VA_IDEPRI), PA_CS3(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE },
- { VA_C2(BAST_VA_IDESEC), PA_CS3(BAST_PA_IDESEC), SZ_1M, MT_DEVICE },
- { VA_C2(BAST_VA_IDEPRIAUX), PA_CS3(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
- { VA_C2(BAST_VA_IDESECAUX), PA_CS3(BAST_PA_IDESECAUX), SZ_1M, MT_DEVICE },
/* slow, word */
{ VA_C3(BAST_VA_ISAIO), PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
{ VA_C3(BAST_VA_ISAMEM), PA_CS3(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
{ VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
- { VA_C3(BAST_VA_IDEPRI), PA_CS3(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE },
- { VA_C3(BAST_VA_IDESEC), PA_CS3(BAST_PA_IDESEC), SZ_1M, MT_DEVICE },
- { VA_C3(BAST_VA_IDEPRIAUX), PA_CS3(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
- { VA_C3(BAST_VA_IDESECAUX), PA_CS3(BAST_PA_IDESECAUX), SZ_1M, MT_DEVICE },
/* fast, byte */
{ VA_C4(BAST_VA_ISAIO), PA_CS4(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
{ VA_C4(BAST_VA_ISAMEM), PA_CS4(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
{ VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
- { VA_C4(BAST_VA_IDEPRI), PA_CS5(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE },
- { VA_C4(BAST_VA_IDESEC), PA_CS5(BAST_PA_IDESEC), SZ_1M, MT_DEVICE },
- { VA_C4(BAST_VA_IDEPRIAUX), PA_CS5(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
- { VA_C4(BAST_VA_IDESECAUX), PA_CS5(BAST_PA_IDESECAUX), SZ_1M, MT_DEVICE },
/* fast, word */
{ VA_C5(BAST_VA_ISAIO), PA_CS5(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
{ VA_C5(BAST_VA_ISAMEM), PA_CS5(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
{ VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
- { VA_C5(BAST_VA_IDEPRI), PA_CS5(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE },
- { VA_C5(BAST_VA_IDESEC), PA_CS5(BAST_PA_IDESEC), SZ_1M, MT_DEVICE },
- { VA_C5(BAST_VA_IDEPRIAUX), PA_CS5(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
- { VA_C5(BAST_VA_IDESECAUX), PA_CS5(BAST_PA_IDESECAUX), SZ_1M, MT_DEVICE },
};
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
@@ -218,23 +206,6 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
}
};
-/* NOR Flash on BAST board */
-
-static struct resource bast_nor_resource[] = {
- [0] = {
- .start = S3C2410_CS1 + 0x4000000,
- .end = S3C2410_CS1 + 0x4000000 + (32*1024*1024) - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device bast_device_nor = {
- .name = "bast-nor",
- .id = -1,
- .num_resources = ARRAY_SIZE(bast_nor_resource),
- .resource = bast_nor_resource,
-};
-
/* NAND Flash on BAST board */
#ifdef CONFIG_PM
@@ -374,7 +345,7 @@ static struct resource bast_dm9k_resource[] = {
[2] = {
.start = IRQ_DM9000,
.end = IRQ_DM9000,
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
}
};
@@ -564,6 +535,18 @@ static struct s3c2410fb_mach_info __initdata bast_fb_info = {
.default_display = 1,
};
+/* I2C devices fitted. */
+
+static struct i2c_board_info bast_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("tlv320aic23", 0x1a),
+ }, {
+ I2C_BOARD_INFO("simtec-pmu", 0x6b),
+ }, {
+ I2C_BOARD_INFO("ch7013", 0x75),
+ },
+};
+
/* Standard BAST devices */
static struct platform_device *bast_devices[] __initdata = {
@@ -573,7 +556,6 @@ static struct platform_device *bast_devices[] __initdata = {
&s3c_device_i2c,
&s3c_device_rtc,
&s3c_device_nand,
- &bast_device_nor,
&bast_device_dm9k,
&bast_device_asix,
&bast_device_axpp,
@@ -622,6 +604,11 @@ static void __init bast_init(void)
s3c24xx_fb_set_platdata(&bast_fb_info);
platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
+
+ i2c_register_board_info(0, bast_i2c_devs,
+ ARRAY_SIZE(bast_i2c_devs));
+
+ nor_simtec_init();
}
MACHINE_START(BAST, "Simtec-BAST")
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 621f548da610..43c2e915c5bf 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -1,9 +1,10 @@
-/* linux/arch/arm/mach-s3c2410/mach-n30.c
+/* Machine specific code for the Acer n30, Acer N35, Navman PiN 570,
+ * Yakumo AlphaX and Airis NC05 PDAs.
*
* Copyright (c) 2003-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * Copyright (c) 2005 Christer Weinigel <christer@weinigel.se>
+ * Copyright (c) 2005-2008 Christer Weinigel <christer@weinigel.se>
*
* There is a wiki with more information about the n30 port at
* http://handhelds.org/moin/moin.cgi/AcerN30Documentation .
@@ -11,36 +12,42 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
+
#include <linux/delay.h>
-#include <linux/serial_core.h>
+#include <linux/gpio_keys.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <linux/kthread.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
+#include <linux/serial_core.h>
+#include <linux/timer.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <asm/arch/fb.h>
+#include <asm/arch/leds-gpio.h>
#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
#include <asm/plat-s3c/iic.h>
+#include <asm/plat-s3c/regs-serial.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/udc.h>
static struct map_desc n30_iodesc[] __initdata = {
/* nothing here yet */
@@ -64,7 +71,8 @@ static struct s3c2410_uartcfg n30_uartcfgs[] = {
.ulcon = 0x43,
.ufcon = 0x51,
},
- /* The BlueTooth controller is connected to port 2 */
+ /* On the N30 the bluetooth controller is connected here.
+ * On the N35 and variants the GPS receiver is connected here. */
[2] = {
.hwport = 2,
.flags = 0,
@@ -74,13 +82,260 @@ static struct s3c2410_uartcfg n30_uartcfgs[] = {
},
};
+static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
+{
+ switch (cmd) {
+ case S3C2410_UDC_P_ENABLE :
+ s3c2410_gpio_setpin(S3C2410_GPB3, 1);
+ break;
+ case S3C2410_UDC_P_DISABLE :
+ s3c2410_gpio_setpin(S3C2410_GPB3, 0);
+ break;
+ case S3C2410_UDC_P_RESET :
+ break;
+ default:
+ break;
+ }
+}
+
+static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
+ .udc_command = n30_udc_pullup,
+ .vbus_pin = S3C2410_GPG1,
+ .vbus_pin_inverted = 0,
+};
+
+static struct gpio_keys_button n30_buttons[] = {
+ {
+ .gpio = S3C2410_GPF0,
+ .code = KEY_POWER,
+ .desc = "Power",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPG9,
+ .code = KEY_UP,
+ .desc = "Thumbwheel Up",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPG8,
+ .code = KEY_DOWN,
+ .desc = "Thumbwheel Down",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPG7,
+ .code = KEY_ENTER,
+ .desc = "Thumbwheel Press",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPF7,
+ .code = KEY_HOMEPAGE,
+ .desc = "Home",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPF6,
+ .code = KEY_CALENDAR,
+ .desc = "Calendar",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPF5,
+ .code = KEY_ADDRESSBOOK,
+ .desc = "Contacts",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPF4,
+ .code = KEY_MAIL,
+ .desc = "Mail",
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_platform_data n30_button_data = {
+ .buttons = n30_buttons,
+ .nbuttons = ARRAY_SIZE(n30_buttons),
+};
+
+static struct platform_device n30_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &n30_button_data,
+ }
+};
+
+static struct gpio_keys_button n35_buttons[] = {
+ {
+ .gpio = S3C2410_GPF0,
+ .code = KEY_POWER,
+ .desc = "Power",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPG9,
+ .code = KEY_UP,
+ .desc = "Joystick Up",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPG8,
+ .code = KEY_DOWN,
+ .desc = "Joystick Down",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPG6,
+ .code = KEY_DOWN,
+ .desc = "Joystick Left",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPG5,
+ .code = KEY_DOWN,
+ .desc = "Joystick Right",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPG7,
+ .code = KEY_ENTER,
+ .desc = "Joystick Press",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPF7,
+ .code = KEY_HOMEPAGE,
+ .desc = "Home",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPF6,
+ .code = KEY_CALENDAR,
+ .desc = "Calendar",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPF5,
+ .code = KEY_ADDRESSBOOK,
+ .desc = "Contacts",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPF4,
+ .code = KEY_MAIL,
+ .desc = "Mail",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPF3,
+ .code = SW_RADIO,
+ .desc = "GPS Antenna",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPG2,
+ .code = SW_HEADPHONE_INSERT,
+ .desc = "Headphone",
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_platform_data n35_button_data = {
+ .buttons = n35_buttons,
+ .nbuttons = ARRAY_SIZE(n35_buttons),
+};
+
+static struct platform_device n35_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &n35_button_data,
+ }
+};
+
+/* This is the bluetooth LED on the device. */
+static struct s3c24xx_led_platdata n30_blue_led_pdata = {
+ .name = "blue_led",
+ .gpio = S3C2410_GPG6,
+ .def_trigger = "",
+};
+
+/* This LED is driven by the battery microcontroller, and is blinking
+ * red, blinking green or solid green when the battery is low,
+ * charging or full respectively. By driving GPD9 low, it's possible
+ * to force the LED to blink red, so call that warning LED. */
+static struct s3c24xx_led_platdata n30_warning_led_pdata = {
+ .name = "warning_led",
+ .flags = S3C24XX_LEDF_ACTLOW,
+ .gpio = S3C2410_GPD9,
+ .def_trigger = "",
+};
+
+static struct platform_device n30_blue_led = {
+ .name = "s3c24xx_led",
+ .id = 1,
+ .dev = {
+ .platform_data = &n30_blue_led_pdata,
+ },
+};
+
+static struct platform_device n30_warning_led = {
+ .name = "s3c24xx_led",
+ .id = 2,
+ .dev = {
+ .platform_data = &n30_warning_led_pdata,
+ },
+};
+
+static struct s3c2410fb_display n30_display __initdata = {
+ .type = S3C2410_LCDCON1_TFT,
+ .width = 240,
+ .height = 320,
+ .pixclock = 170000,
+
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .left_margin = 3,
+ .right_margin = 40,
+ .hsync_len = 40,
+ .upper_margin = 2,
+ .lower_margin = 3,
+ .vsync_len = 2,
+
+ .lcdcon5 = S3C2410_LCDCON5_INVVLINE | S3C2410_LCDCON5_INVVFRAME,
+};
+
+static struct s3c2410fb_mach_info n30_fb_info __initdata = {
+ .displays = &n30_display,
+ .num_displays = 1,
+ .default_display = 0,
+ .lpcsel = 0x06,
+};
+
static struct platform_device *n30_devices[] __initdata = {
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c,
+ &s3c_device_iis,
&s3c_device_usb,
+ &s3c_device_usbgadget,
+ &n30_button_device,
+ &n30_blue_led,
+ &n30_warning_led,
+};
+
+static struct platform_device *n35_devices[] __initdata = {
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_iis,
&s3c_device_usbgadget,
+ &n35_button_device,
};
static struct s3c2410_platform_i2c n30_i2ccfg = {
@@ -90,9 +345,148 @@ static struct s3c2410_platform_i2c n30_i2ccfg = {
.max_freq = 10*1000,
};
+/* Lots of hardcoded stuff, but it sets up the hardware in a useful
+ * state so that we can boot Linux directly from flash. */
+static void __init n30_hwinit(void)
+{
+ /* GPA0-11 special functions -- unknown what they do
+ * GPA12 N30 special function -- unknown what it does
+ * N35/PiN output -- unknown what it does
+ *
+ * A12 is nGCS1 on the N30 and an output on the N35/PiN. I
+ * don't think it does anything useful on the N30, so I ought
+ * to make it an output there too since it always driven to 0
+ * as far as I can tell. */
+ if (machine_is_n30())
+ __raw_writel(0x007fffff, S3C2410_GPACON);
+ if (machine_is_n35())
+ __raw_writel(0x007fefff, S3C2410_GPACON);
+ __raw_writel(0x00000000, S3C2410_GPADAT);
+
+ /* GPB0 TOUT0 backlight level
+ * GPB1 output 1=backlight on
+ * GPB2 output IrDA enable 0=transceiver enabled, 1=disabled
+ * GPB3 output USB D+ pull up 0=disabled, 1=enabled
+ * GPB4 N30 output -- unknown function
+ * N30/PiN GPS control 0=GPS enabled, 1=GPS disabled
+ * GPB5 output -- unknown function
+ * GPB6 input -- unknown function
+ * GPB7 output -- unknown function
+ * GPB8 output -- probably LCD driver enable
+ * GPB9 output -- probably LCD VSYNC driver enable
+ * GPB10 output -- probably LCD HSYNC driver enable
+ */
+ __raw_writel(0x00154556, S3C2410_GPBCON);
+ __raw_writel(0x00000750, S3C2410_GPBDAT);
+ __raw_writel(0x00000073, S3C2410_GPBUP);
+
+ /* GPC0 input RS232 DCD/DSR/RI
+ * GPC1 LCD
+ * GPC2 output RS232 DTR?
+ * GPC3 input RS232 DCD/DSR/RI
+ * GPC4 LCD
+ * GPC5 output 0=NAND write enabled, 1=NAND write protect
+ * GPC6 input -- unknown function
+ * GPC7 input charger status 0=charger connected
+ * this input can be triggered by power on the USB device
+ * port too, but will go back to disconnected soon after.
+ * GPC8 N30/N35 output -- unknown function, always driven to 1
+ * PiN input -- unknown function, always read as 1
+ * Make it an input with a pull up for all models.
+ * GPC9-15 LCD
+ */
+ __raw_writel(0xaaa80618, S3C2410_GPCCON);
+ __raw_writel(0x0000014c, S3C2410_GPCDAT);
+ __raw_writel(0x0000fef2, S3C2410_GPCUP);
+
+ /* GPD0 input -- unknown function
+ * GPD1-D7 LCD
+ * GPD8 N30 output -- unknown function
+ * N35/PiN output 1=GPS LED on
+ * GPD9 output 0=power led blinks red, 1=normal power led function
+ * GPD10 output -- unknown function
+ * GPD11-15 LCD drivers
+ */
+ __raw_writel(0xaa95aaa4, S3C2410_GPDCON);
+ __raw_writel(0x00000601, S3C2410_GPDDAT);
+ __raw_writel(0x0000fbfe, S3C2410_GPDUP);
+
+ /* GPE0-4 I2S audio bus
+ * GPE5-10 SD/MMC bus
+ * E11-13 outputs -- unknown function, probably power management
+ * E14-15 I2C bus connected to the battery controller
+ */
+ __raw_writel(0xa56aaaaa, S3C2410_GPECON);
+ __raw_writel(0x0000efc5, S3C2410_GPEDAT);
+ __raw_writel(0x0000f81f, S3C2410_GPEUP);
+
+ /* GPF0 input 0=power button pressed
+ * GPF1 input SD/MMC switch 0=card present
+ * GPF2 N30 1=reset button pressed (inverted compared to the rest)
+ * N35/PiN 0=reset button pressed
+ * GPF3 N30/PiN input -- unknown function
+ * N35 input GPS antenna position, 0=antenna closed, 1=open
+ * GPF4 input 0=button 4 pressed
+ * GPF5 input 0=button 3 pressed
+ * GPF6 input 0=button 2 pressed
+ * GPF7 input 0=button 1 pressed
+ */
+ __raw_writel(0x0000aaaa, S3C2410_GPFCON);
+ __raw_writel(0x00000000, S3C2410_GPFDAT);
+ __raw_writel(0x000000ff, S3C2410_GPFUP);
+
+ /* GPG0 input RS232 DCD/DSR/RI
+ * GPG1 input 1=USB gadget port has power from a host
+ * GPG2 N30 input -- unknown function
+ * N35/PiN input 0=headphones plugged in, 1=not plugged in
+ * GPG3 N30 output -- unknown function
+ * N35/PiN input with unknown function
+ * GPG4 N30 output 0=MMC enabled, 1=MMC disabled
+ * GPG5 N30 output 0=BlueTooth chip disabled, 1=enabled
+ * N35/PiN input joystick right
+ * GPG6 N30 output 0=blue led on, 1=off
+ * N35/PiN input joystick left
+ * GPG7 input 0=thumbwheel pressed
+ * GPG8 input 0=thumbwheel down
+ * GPG9 input 0=thumbwheel up
+ * GPG10 input SD/MMC write protect switch
+ * GPG11 N30 input -- unknown function
+ * N35 output 0=GPS antenna powered, 1=not powered
+ * PiN output -- unknown function
+ * GPG12-15 touch screen functions
+ *
+ * The pullups differ between the models, so enable all
+ * pullups that are enabled on any of the models.
+ */
+ if (machine_is_n30())
+ __raw_writel(0xff0a956a, S3C2410_GPGCON);
+ if (machine_is_n35())
+ __raw_writel(0xff4aa92a, S3C2410_GPGCON);
+ __raw_writel(0x0000e800, S3C2410_GPGDAT);
+ __raw_writel(0x0000f86f, S3C2410_GPGUP);
+
+ /* GPH0/1/2/3 RS232 serial port
+ * GPH4/5 IrDA serial port
+ * GPH6/7 N30 BlueTooth serial port
+ * N35/PiN GPS receiver
+ * GPH8 input -- unknown function
+ * GPH9 CLKOUT0 HCLK -- unknown use
+ * GPH10 CLKOUT1 FCLK -- unknown use
+ *
+ * The pull ups for H6/H7 are enabled on N30 but not on the
+ * N35/PiN. I suppose is useful for a budget model of the N30
+ * with no bluetooh. It doesn't hurt to have the pull ups
+ * enabled on the N35, so leave them enabled for all models.
+ */
+ __raw_writel(0x0028aaaa, S3C2410_GPHCON);
+ __raw_writel(0x000005ef, S3C2410_GPHDAT);
+ __raw_writel(0x0000063f, S3C2410_GPHUP);
+}
+
static void __init n30_map_io(void)
{
s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
+ n30_hwinit();
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
}
@@ -106,7 +500,9 @@ static void __init n30_init_irq(void)
static void __init n30_init(void)
{
+ s3c24xx_fb_set_platdata(&n30_fb_info);
s3c_device_i2c.dev.platform_data = &n30_i2ccfg;
+ s3c24xx_udc_set_platdata(&n30_udc_cfg);
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
@@ -115,7 +511,32 @@ static void __init n30_init(void)
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
- platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices));
+ if (machine_is_n30()) {
+ /* Turn off suspend on both USB ports, and switch the
+ * selectable USB port to USB device mode. */
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+ platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices));
+ }
+
+ if (machine_is_n35()) {
+ /* Turn off suspend and switch the selectable USB port
+ * to USB device mode. Turn on suspend for the host
+ * port since it is not connected on the N35.
+ *
+ * Actually, the host port is available at some pads
+ * on the back of the device, so it would actually be
+ * possible to add a USB device inside the N35 if you
+ * are willing to do some hardware modifications. */
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1,
+ S3C2410_MISCCR_USBSUSPND1);
+
+ platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices));
+ }
}
MACHINE_START(N30, "Acer-N30")
@@ -131,9 +552,14 @@ MACHINE_START(N30, "Acer-N30")
.map_io = n30_map_io,
MACHINE_END
-/*
- Local variables:
- compile-command: "make ARCH=arm CROSS_COMPILE=/usr/local/arm/3.3.2/bin/arm-linux- -k -C ../../.."
- c-basic-offset: 8
- End:
-*/
+MACHINE_START(N35, "Acer-N35")
+ /* Maintainer: Christer Weinigel <christer@weinigel.se>
+ */
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .timer = &s3c24xx_timer,
+ .init_machine = n30_init,
+ .init_irq = n30_init_irq,
+ .map_io = n30_map_io,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 4c4b5c4207c4..9a0965ac5e11 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2410/mach-vr1000.c
*
- * Copyright (c) 2003-2005 Simtec Electronics
+ * Copyright (c) 2003-2005,2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Machine support for Thorcom VR1000 board. Designed for Thorcom by
@@ -19,6 +19,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/dm9000.h>
+#include <linux/i2c.h>
#include <linux/serial.h>
#include <linux/tty.h>
@@ -46,7 +47,9 @@
#include <asm/plat-s3c24xx/clock.h>
#include <asm/plat-s3c24xx/devs.h>
#include <asm/plat-s3c24xx/cpu.h>
+
#include "usb-simtec.h"
+#include "nor-simtec.h"
/* macros for virtual address mods for the io space entries */
#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
@@ -97,34 +100,6 @@ static struct map_desc vr1000_iodesc[] __initdata = {
.length = SZ_1M,
.type = MT_DEVICE,
},
-
- /* peripheral space... one for each of fast/slow/byte/16bit */
- /* note, ide is only decoded in word space, even though some registers
- * are only 8bit */
-
- /* slow, byte */
- { VA_C2(VR1000_VA_IDEPRI), PA_CS3(VR1000_PA_IDEPRI), SZ_1M, MT_DEVICE },
- { VA_C2(VR1000_VA_IDESEC), PA_CS3(VR1000_PA_IDESEC), SZ_1M, MT_DEVICE },
- { VA_C2(VR1000_VA_IDEPRIAUX), PA_CS3(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
- { VA_C2(VR1000_VA_IDESECAUX), PA_CS3(VR1000_PA_IDESECAUX), SZ_1M, MT_DEVICE },
-
- /* slow, word */
- { VA_C3(VR1000_VA_IDEPRI), PA_CS3(VR1000_PA_IDEPRI), SZ_1M, MT_DEVICE },
- { VA_C3(VR1000_VA_IDESEC), PA_CS3(VR1000_PA_IDESEC), SZ_1M, MT_DEVICE },
- { VA_C3(VR1000_VA_IDEPRIAUX), PA_CS3(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
- { VA_C3(VR1000_VA_IDESECAUX), PA_CS3(VR1000_PA_IDESECAUX), SZ_1M, MT_DEVICE },
-
- /* fast, byte */
- { VA_C4(VR1000_VA_IDEPRI), PA_CS5(VR1000_PA_IDEPRI), SZ_1M, MT_DEVICE },
- { VA_C4(VR1000_VA_IDESEC), PA_CS5(VR1000_PA_IDESEC), SZ_1M, MT_DEVICE },
- { VA_C4(VR1000_VA_IDEPRIAUX), PA_CS5(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
- { VA_C4(VR1000_VA_IDESECAUX), PA_CS5(VR1000_PA_IDESECAUX), SZ_1M, MT_DEVICE },
-
- /* fast, word */
- { VA_C5(VR1000_VA_IDEPRI), PA_CS5(VR1000_PA_IDEPRI), SZ_1M, MT_DEVICE },
- { VA_C5(VR1000_VA_IDESEC), PA_CS5(VR1000_PA_IDESEC), SZ_1M, MT_DEVICE },
- { VA_C5(VR1000_VA_IDEPRIAUX), PA_CS5(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
- { VA_C5(VR1000_VA_IDESECAUX), PA_CS5(VR1000_PA_IDESECAUX), SZ_1M, MT_DEVICE },
};
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
@@ -230,23 +205,6 @@ static struct platform_device serial_device = {
},
};
-/* MTD NOR Flash */
-
-static struct resource vr1000_nor_resource[] = {
- [0] = {
- .start = S3C2410_CS1 + 0x4000000,
- .end = S3C2410_CS1 + 0x4000000 + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device vr1000_nor = {
- .name = "bast-nor",
- .id = -1,
- .num_resources = ARRAY_SIZE(vr1000_nor_resource),
- .resource = vr1000_nor_resource,
-};
-
/* DM9000 ethernet devices */
static struct resource vr1000_dm9k0_resource[] = {
@@ -263,7 +221,7 @@ static struct resource vr1000_dm9k0_resource[] = {
[2] = {
.start = IRQ_VR1000_DM9000A,
.end = IRQ_VR1000_DM9000A,
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
}
};
@@ -282,7 +240,7 @@ static struct resource vr1000_dm9k1_resource[] = {
[2] = {
.start = IRQ_VR1000_DM9000N,
.end = IRQ_VR1000_DM9000N,
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
}
};
@@ -358,6 +316,18 @@ static struct platform_device vr1000_led3 = {
},
};
+/* I2C devices. */
+
+static struct i2c_board_info vr1000_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("tlv320aic23", 0x1a),
+ }, {
+ I2C_BOARD_INFO("tmp101", 0x48),
+ }, {
+ I2C_BOARD_INFO("m41st87", 0x68),
+ },
+};
+
/* devices for this board */
static struct platform_device *vr1000_devices[] __initdata = {
@@ -367,7 +337,6 @@ static struct platform_device *vr1000_devices[] __initdata = {
&s3c_device_i2c,
&s3c_device_adc,
&serial_device,
- &vr1000_nor,
&vr1000_dm9k0,
&vr1000_dm9k1,
&vr1000_led1,
@@ -416,6 +385,11 @@ static void __init vr1000_map_io(void)
static void __init vr1000_init(void)
{
platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices));
+
+ i2c_register_board_info(0, vr1000_i2c_devs,
+ ARRAY_SIZE(vr1000_i2c_devs));
+
+ nor_simtec_init();
}
MACHINE_START(VR1000, "Thorcom-VR1000")
diff --git a/arch/arm/mach-s3c2410/nor-simtec.c b/arch/arm/mach-s3c2410/nor-simtec.c
new file mode 100644
index 000000000000..f44e21b9c3ba
--- /dev/null
+++ b/arch/arm/mach-s3c2410/nor-simtec.c
@@ -0,0 +1,86 @@
+/* linux/arch/arm/mach-s3c2410/nor-simtec.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Simtec NOR mapping
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/map.h>
+#include <asm/arch/bast-map.h>
+#include <asm/arch/bast-cpld.h>
+
+
+static void simtec_nor_vpp(struct map_info *map, int vpp)
+{
+ unsigned int val;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ val = __raw_readb(BAST_VA_CTRL3);
+
+ printk(KERN_DEBUG "%s(%d)\n", __func__, vpp);
+
+ if (vpp)
+ val |= BAST_CPLD_CTRL3_ROMWEN;
+ else
+ val &= ~BAST_CPLD_CTRL3_ROMWEN;
+
+ __raw_writeb(val, BAST_VA_CTRL3);
+ local_irq_restore(flags);
+}
+
+struct physmap_flash_data simtec_nor_pdata = {
+ .width = 2,
+ .set_vpp = simtec_nor_vpp,
+ .nr_parts = 0,
+};
+
+static struct resource simtec_nor_resource[] = {
+ [0] = {
+ .start = S3C2410_CS1 + 0x4000000,
+ .end = S3C2410_CS1 + 0x4000000 + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device simtec_device_nor = {
+ .name = "physmap-flash",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(simtec_nor_resource),
+ .resource = simtec_nor_resource,
+ .dev = {
+ .platform_data = &simtec_nor_pdata,
+ },
+};
+
+void __init nor_simtec_init(void)
+{
+ int ret;
+
+ ret = platform_device_register(&simtec_device_nor);
+ if (ret < 0)
+ printk(KERN_ERR "failed to register physmap-flash device\n");
+ else
+ simtec_nor_vpp(NULL, 1);
+}
diff --git a/arch/arm/mach-s3c2410/nor-simtec.h b/arch/arm/mach-s3c2410/nor-simtec.h
new file mode 100644
index 000000000000..f619c1e0d0c8
--- /dev/null
+++ b/arch/arm/mach-s3c2410/nor-simtec.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s3c2410/nor-simtec.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Simtec NOR mapping
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void nor_simtec_init(void);
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 0b43431d4b75..c59a9d2ee9a6 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -34,6 +34,16 @@ config S3C2412_PM
menu "S3C2412 Machines"
+config MACH_JIVE
+ bool "Logitech Jive"
+ select CPU_S3C2412
+ help
+ Say Y here if you are using the Logitech Jive.
+
+config MACH_JIVE_SHOW_BOOTLOADER
+ bool "Allow access to bootloader partitions in MTD"
+ depends on MACH_JIVE && EXPERIMENTAL
+
config MACH_SMDK2413
bool "SMDK2413"
select CPU_S3C2412
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index 267f3348301e..20918d5dc6a9 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -18,5 +18,6 @@ obj-$(CONFIG_S3C2412_PM) += pm.o sleep.o
# Machine support
+obj-$(CONFIG_MACH_JIVE) += mach-jive.o
obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o
obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index 2697a65ba727..1157b5a16263 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -631,6 +631,17 @@ static struct clk_init clks_src[] __initdata = {
.bit = S3C2412_CLKSRC_USBCLK_HCLK,
.src_0 = &clk_usysclk,
.src_1 = &clk_h,
+ /* here we assume OM[4] select xtal */
+ }, {
+ .clk = &clk_erefclk,
+ .bit = S3C2412_CLKSRC_EREFCLK_EXTCLK,
+ .src_0 = &clk_xtal,
+ .src_1 = &clk_ext,
+ }, {
+ .clk = &clk_urefclk,
+ .bit = S3C2412_CLKSRC_UREFCLK_EXTCLK,
+ .src_0 = &clk_xtal,
+ .src_1 = &clk_ext,
},
};
@@ -666,8 +677,6 @@ static void __init s3c2412_clk_initparents(void)
static struct clk *clks[] __initdata = {
&clk_ext,
&clk_usb_bus,
- &clk_erefclk,
- &clk_urefclk,
&clk_mrefclk,
&clk_armclk,
};
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
new file mode 100644
index 000000000000..7f5924713485
--- /dev/null
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -0,0 +1,687 @@
+/* linux/arch/arm/mach-s3c2410/mach-jive.c
+ *
+ * Copyright 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+
+#include <video/ili9320.h>
+
+#include <linux/spi/spi.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/plat-s3c/regs-serial.h>
+#include <asm/plat-s3c/nand.h>
+#include <asm/plat-s3c/iic.h>
+
+#include <asm/arch/regs-power.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/spi-gpio.h>
+#include <asm/arch/fb.h>
+
+#include <asm/mach-types.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+#include <asm/plat-s3c24xx/udc.h>
+
+static struct map_desc jive_iodesc[] __initdata = {
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg jive_uartcfgs[] = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ }
+};
+
+/* Jive flash assignment
+ *
+ * 0x00000000-0x00028000 : uboot
+ * 0x00028000-0x0002c000 : uboot env
+ * 0x0002c000-0x00030000 : spare
+ * 0x00030000-0x00200000 : zimage A
+ * 0x00200000-0x01600000 : cramfs A
+ * 0x01600000-0x017d0000 : zimage B
+ * 0x017d0000-0x02bd0000 : cramfs B
+ * 0x02bd0000-0x03fd0000 : yaffs
+ */
+static struct mtd_partition jive_imageA_nand_part[] = {
+
+#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
+ /* Don't allow access to the bootloader from linux */
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = (160 * SZ_1K),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+
+ /* spare */
+ {
+ .name = "spare",
+ .offset = (176 * SZ_1K),
+ .size = (16 * SZ_1K),
+ },
+#endif
+
+ /* booted images */
+ {
+ .name = "kernel (ro)",
+ .offset = (192 * SZ_1K),
+ .size = (SZ_2M) - (192 * SZ_1K),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ .name = "root (ro)",
+ .offset = (SZ_2M),
+ .size = (20 * SZ_1M),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+
+ /* yaffs */
+ {
+ .name = "yaffs",
+ .offset = (44 * SZ_1M),
+ .size = (20 * SZ_1M),
+ },
+
+ /* bootloader environment */
+ {
+ .name = "env",
+ .offset = (160 * SZ_1K),
+ .size = (16 * SZ_1K),
+ },
+
+ /* upgrade images */
+ {
+ .name = "zimage",
+ .offset = (22 * SZ_1M),
+ .size = (2 * SZ_1M) - (192 * SZ_1K),
+ }, {
+ .name = "cramfs",
+ .offset = (24 * SZ_1M) - (192*SZ_1K),
+ .size = (20 * SZ_1M),
+ },
+};
+
+static struct mtd_partition jive_imageB_nand_part[] = {
+
+#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
+ /* Don't allow access to the bootloader from linux */
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = (160 * SZ_1K),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+
+ /* spare */
+ {
+ .name = "spare",
+ .offset = (176 * SZ_1K),
+ .size = (16 * SZ_1K),
+ },
+#endif
+
+ /* booted images */
+ {
+ .name = "kernel (ro)",
+ .offset = (22 * SZ_1M),
+ .size = (2 * SZ_1M) - (192 * SZ_1K),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "root (ro)",
+ .offset = (24 * SZ_1M) - (192 * SZ_1K),
+ .size = (20 * SZ_1M),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+
+ /* yaffs */
+ {
+ .name = "yaffs",
+ .offset = (44 * SZ_1M),
+ .size = (20 * SZ_1M),
+ },
+
+ /* bootloader environment */
+ {
+ .name = "env",
+ .offset = (160 * SZ_1K),
+ .size = (16 * SZ_1K),
+ },
+
+ /* upgrade images */
+ {
+ .name = "zimage",
+ .offset = (192 * SZ_1K),
+ .size = (2 * SZ_1M) - (192 * SZ_1K),
+ }, {
+ .name = "cramfs",
+ .offset = (2 * SZ_1M),
+ .size = (20 * SZ_1M),
+ },
+};
+
+static struct s3c2410_nand_set jive_nand_sets[] = {
+ [0] = {
+ .name = "flash",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(jive_imageA_nand_part),
+ .partitions = jive_imageA_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand jive_nand_info = {
+ /* set taken from osiris nand timings, possibly still conservative */
+ .tacls = 30,
+ .twrph0 = 55,
+ .twrph1 = 40,
+ .sets = jive_nand_sets,
+ .nr_sets = ARRAY_SIZE(jive_nand_sets),
+};
+
+static int __init jive_mtdset(char *options)
+{
+ struct s3c2410_nand_set *nand = &jive_nand_sets[0];
+ unsigned long set;
+
+ if (options == NULL || options[0] == '\0')
+ return 0;
+
+ if (strict_strtoul(options, 10, &set)) {
+ printk(KERN_ERR "failed to parse mtdset=%s\n", options);
+ return 0;
+ }
+
+ switch (set) {
+ case 1:
+ nand->nr_partitions = ARRAY_SIZE(jive_imageB_nand_part);
+ nand->partitions = jive_imageB_nand_part;
+ case 0:
+ /* this is already setup in the nand info */
+ break;
+ default:
+ printk(KERN_ERR "Unknown mtd set %ld specified,"
+ "using default.", set);
+ }
+
+ return 0;
+}
+
+/* parse the mtdset= option given to the kernel command line */
+__setup("mtdset=", jive_mtdset);
+
+/* LCD timing and setup */
+
+#define LCD_XRES (240)
+#define LCD_YRES (320)
+#define LCD_LEFT_MARGIN (12)
+#define LCD_RIGHT_MARGIN (12)
+#define LCD_LOWER_MARGIN (12)
+#define LCD_UPPER_MARGIN (12)
+#define LCD_VSYNC (2)
+#define LCD_HSYNC (2)
+
+#define LCD_REFRESH (60)
+
+#define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN)
+#define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN)
+
+struct s3c2410fb_display jive_vgg2432a4_display[] = {
+ [0] = {
+ .width = LCD_XRES,
+ .height = LCD_YRES,
+ .xres = LCD_XRES,
+ .yres = LCD_YRES,
+ .left_margin = LCD_LEFT_MARGIN,
+ .right_margin = LCD_RIGHT_MARGIN,
+ .upper_margin = LCD_UPPER_MARGIN,
+ .lower_margin = LCD_LOWER_MARGIN,
+ .hsync_len = LCD_HSYNC,
+ .vsync_len = LCD_VSYNC,
+
+ .pixclock = (1000000000000LL /
+ (LCD_REFRESH * LCD_HTOT * LCD_VTOT)),
+
+ .bpp = 16,
+ .type = (S3C2410_LCDCON1_TFT16BPP |
+ S3C2410_LCDCON1_TFT),
+
+ .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_INVVDEN |
+ S3C2410_LCDCON5_PWREN),
+ },
+};
+
+/* todo - put into gpio header */
+
+#define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2))
+#define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2))
+
+struct s3c2410fb_mach_info jive_lcd_config = {
+ .displays = jive_vgg2432a4_display,
+ .num_displays = ARRAY_SIZE(jive_vgg2432a4_display),
+ .default_display = 0,
+
+ /* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
+ * and disable the pull down resistors on pins we are using for LCD
+ * data. */
+
+ .gpcup = (0xf << 1) | (0x3f << 10),
+
+ .gpccon = (S3C2410_GPC1_VCLK | S3C2410_GPC2_VLINE |
+ S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
+ S3C2410_GPC10_VD2 | S3C2410_GPC11_VD3 |
+ S3C2410_GPC12_VD4 | S3C2410_GPC13_VD5 |
+ S3C2410_GPC14_VD6 | S3C2410_GPC15_VD7),
+
+ .gpccon_mask = (S3C2410_GPCCON_MASK(1) | S3C2410_GPCCON_MASK(2) |
+ S3C2410_GPCCON_MASK(3) | S3C2410_GPCCON_MASK(4) |
+ S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
+ S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
+ S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
+
+ .gpdup = (0x3f << 2) | (0x3f << 10),
+
+ .gpdcon = (S3C2410_GPD2_VD10 | S3C2410_GPD3_VD11 |
+ S3C2410_GPD4_VD12 | S3C2410_GPD5_VD13 |
+ S3C2410_GPD6_VD14 | S3C2410_GPD7_VD15 |
+ S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
+ S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
+ S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
+
+ .gpdcon_mask = (S3C2410_GPDCON_MASK(2) | S3C2410_GPDCON_MASK(3) |
+ S3C2410_GPDCON_MASK(4) | S3C2410_GPDCON_MASK(5) |
+ S3C2410_GPDCON_MASK(6) | S3C2410_GPDCON_MASK(7) |
+ S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
+ S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
+ S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
+};
+
+/* ILI9320 support. */
+
+static void jive_lcm_reset(unsigned int set)
+{
+ printk(KERN_DEBUG "%s(%d)\n", __func__, set);
+
+ s3c2410_gpio_setpin(S3C2410_GPG13, set);
+ s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+}
+
+#undef LCD_UPPER_MARGIN
+#define LCD_UPPER_MARGIN 2
+
+static struct ili9320_platdata jive_lcm_config = {
+ .hsize = LCD_XRES,
+ .vsize = LCD_YRES,
+
+ .reset = jive_lcm_reset,
+ .suspend = ILI9320_SUSPEND_DEEP,
+
+ .entry_mode = ILI9320_ENTRYMODE_ID(3) | ILI9320_ENTRYMODE_BGR,
+ .display2 = (ILI9320_DISPLAY2_FP(LCD_UPPER_MARGIN) |
+ ILI9320_DISPLAY2_BP(LCD_LOWER_MARGIN)),
+ .display3 = 0x0,
+ .display4 = 0x0,
+ .rgb_if1 = (ILI9320_RGBIF1_RIM_RGB18 |
+ ILI9320_RGBIF1_RM | ILI9320_RGBIF1_CLK_RGBIF),
+ .rgb_if2 = ILI9320_RGBIF2_DPL,
+ .interface2 = 0x0,
+ .interface3 = 0x3,
+ .interface4 = (ILI9320_INTERFACE4_RTNE(16) |
+ ILI9320_INTERFACE4_DIVE(1)),
+ .interface5 = 0x0,
+ .interface6 = 0x0,
+};
+
+/* LCD SPI support */
+
+static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
+{
+ s3c2410_gpio_setpin(S3C2410_GPB7, cs ? 0 : 1);
+}
+
+static struct s3c2410_spigpio_info jive_lcd_spi = {
+ .bus_num = 0,
+ .pin_clk = S3C2410_GPG8,
+ .pin_mosi = S3C2410_GPB8,
+ .chip_select = jive_lcd_spi_chipselect,
+};
+
+static struct platform_device jive_device_lcdspi = {
+ .name = "s3c24xx-spi-gpio",
+ .id = 1,
+ .num_resources = 0,
+ .dev.platform_data = &jive_lcd_spi,
+};
+
+/* WM8750 audio code SPI definition */
+
+static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs)
+{
+ s3c2410_gpio_setpin(S3C2410_GPH10, cs ? 0 : 1);
+}
+
+static struct s3c2410_spigpio_info jive_wm8750_spi = {
+ .bus_num = 2,
+ .pin_clk = S3C2410_GPB4,
+ .pin_mosi = S3C2410_GPB9,
+ .chip_select = jive_wm8750_chipselect,
+};
+
+static struct platform_device jive_device_wm8750 = {
+ .name = "s3c24xx-spi-gpio",
+ .id = 2,
+ .num_resources = 0,
+ .dev.platform_data = &jive_wm8750_spi,
+};
+
+/* JIVE SPI devices. */
+
+static struct spi_board_info __initdata jive_spi_devs[] = {
+ [0] = {
+ .modalias = "VGG2432A4",
+ .bus_num = 1,
+ .chip_select = 0,
+ .mode = SPI_MODE_3, /* CPOL=1, CPHA=1 */
+ .max_speed_hz = 100000,
+ .platform_data = &jive_lcm_config,
+ }, {
+ .modalias = "WM8750",
+ .bus_num = 2,
+ .chip_select = 0,
+ .mode = SPI_MODE_0, /* CPOL=0, CPHA=0 */
+ .max_speed_hz = 100000,
+ },
+};
+
+/* I2C bus and device configuration. */
+
+static struct s3c2410_platform_i2c jive_i2c_cfg = {
+ .max_freq = 80 * 1000,
+ .bus_freq = 50 * 1000,
+ .flags = S3C_IICFLG_FILTER,
+ .sda_delay = 2,
+};
+
+static struct i2c_board_info jive_i2c_devs[] = {
+ [0] = {
+ I2C_BOARD_INFO("lis302dl", 0x1c),
+ .irq = IRQ_EINT14,
+ },
+};
+
+/* The platform devices being used. */
+
+static struct platform_device *jive_devices[] __initdata = {
+ &s3c_device_usb,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+ &s3c_device_i2c,
+ &s3c_device_lcd,
+ &jive_device_lcdspi,
+ &jive_device_wm8750,
+ &s3c_device_nand,
+ &s3c_device_usbgadget,
+};
+
+static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
+ .vbus_pin = S3C2410_GPG1, /* detect is on GPG1 */
+};
+
+/* Jive power management device */
+
+#ifdef CONFIG_PM
+static int jive_pm_suspend(struct sys_device *sd, pm_message_t state)
+{
+ /* Write the magic value u-boot uses to check for resume into
+ * the INFORM0 register, and ensure INFORM1 is set to the
+ * correct address to resume from. */
+
+ __raw_writel(0x2BED, S3C2412_INFORM0);
+ __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2412_INFORM1);
+
+ return 0;
+}
+
+static int jive_pm_resume(struct sys_device *sd)
+{
+ __raw_writel(0x0, S3C2412_INFORM0);
+ return 0;
+}
+
+#else
+#define jive_pm_suspend NULL
+#define jive_pm_resume NULL
+#endif
+
+static struct sysdev_class jive_pm_sysclass = {
+ .name = "jive-pm",
+ .suspend = jive_pm_suspend,
+ .resume = jive_pm_resume,
+};
+
+static struct sys_device jive_pm_sysdev = {
+ .cls = &jive_pm_sysclass,
+};
+
+static void __init jive_map_io(void)
+{
+ s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
+}
+
+static void jive_power_off(void)
+{
+ printk(KERN_INFO "powering system down...\n");
+
+ s3c2410_gpio_setpin(S3C2410_GPC5, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPC5, S3C2410_GPIO_OUTPUT);
+}
+
+static void __init jive_machine_init(void)
+{
+ /* register system devices for managing low level suspend */
+
+ sysdev_class_register(&jive_pm_sysclass);
+ sysdev_register(&jive_pm_sysdev);
+
+ /* write our sleep configurations for the IO. Pull down all unused
+ * IO, ensure that we have turned off all peripherals we do not
+ * need, and configure the ones we do need. */
+
+ /* Port B sleep */
+
+ __raw_writel(S3C2412_SLPCON_IN(0) |
+ S3C2412_SLPCON_PULL(1) |
+ S3C2412_SLPCON_HIGH(2) |
+ S3C2412_SLPCON_PULL(3) |
+ S3C2412_SLPCON_PULL(4) |
+ S3C2412_SLPCON_PULL(5) |
+ S3C2412_SLPCON_PULL(6) |
+ S3C2412_SLPCON_HIGH(7) |
+ S3C2412_SLPCON_PULL(8) |
+ S3C2412_SLPCON_PULL(9) |
+ S3C2412_SLPCON_PULL(10), S3C2412_GPBSLPCON);
+
+ /* Port C sleep */
+
+ __raw_writel(S3C2412_SLPCON_PULL(0) |
+ S3C2412_SLPCON_PULL(1) |
+ S3C2412_SLPCON_PULL(2) |
+ S3C2412_SLPCON_PULL(3) |
+ S3C2412_SLPCON_PULL(4) |
+ S3C2412_SLPCON_PULL(5) |
+ S3C2412_SLPCON_LOW(6) |
+ S3C2412_SLPCON_PULL(6) |
+ S3C2412_SLPCON_PULL(7) |
+ S3C2412_SLPCON_PULL(8) |
+ S3C2412_SLPCON_PULL(9) |
+ S3C2412_SLPCON_PULL(10) |
+ S3C2412_SLPCON_PULL(11) |
+ S3C2412_SLPCON_PULL(12) |
+ S3C2412_SLPCON_PULL(13) |
+ S3C2412_SLPCON_PULL(14) |
+ S3C2412_SLPCON_PULL(15), S3C2412_GPCSLPCON);
+
+ /* Port D sleep */
+
+ __raw_writel(S3C2412_SLPCON_ALL_PULL, S3C2412_GPDSLPCON);
+
+ /* Port F sleep */
+
+ __raw_writel(S3C2412_SLPCON_LOW(0) |
+ S3C2412_SLPCON_LOW(1) |
+ S3C2412_SLPCON_LOW(2) |
+ S3C2412_SLPCON_EINT(3) |
+ S3C2412_SLPCON_EINT(4) |
+ S3C2412_SLPCON_EINT(5) |
+ S3C2412_SLPCON_EINT(6) |
+ S3C2412_SLPCON_EINT(7), S3C2412_GPFSLPCON);
+
+ /* Port G sleep */
+
+ __raw_writel(S3C2412_SLPCON_IN(0) |
+ S3C2412_SLPCON_IN(1) |
+ S3C2412_SLPCON_IN(2) |
+ S3C2412_SLPCON_IN(3) |
+ S3C2412_SLPCON_IN(4) |
+ S3C2412_SLPCON_IN(5) |
+ S3C2412_SLPCON_IN(6) |
+ S3C2412_SLPCON_IN(7) |
+ S3C2412_SLPCON_PULL(8) |
+ S3C2412_SLPCON_PULL(9) |
+ S3C2412_SLPCON_IN(10) |
+ S3C2412_SLPCON_PULL(11) |
+ S3C2412_SLPCON_PULL(12) |
+ S3C2412_SLPCON_PULL(13) |
+ S3C2412_SLPCON_IN(14) |
+ S3C2412_SLPCON_PULL(15), S3C2412_GPGSLPCON);
+
+ /* Port H sleep */
+
+ __raw_writel(S3C2412_SLPCON_PULL(0) |
+ S3C2412_SLPCON_PULL(1) |
+ S3C2412_SLPCON_PULL(2) |
+ S3C2412_SLPCON_PULL(3) |
+ S3C2412_SLPCON_PULL(4) |
+ S3C2412_SLPCON_PULL(5) |
+ S3C2412_SLPCON_PULL(6) |
+ S3C2412_SLPCON_IN(7) |
+ S3C2412_SLPCON_IN(8) |
+ S3C2412_SLPCON_PULL(9) |
+ S3C2412_SLPCON_IN(10), S3C2412_GPHSLPCON);
+
+ /* initialise the power management now we've setup everything. */
+
+ s3c2410_pm_init();
+
+ s3c_device_nand.dev.platform_data = &jive_nand_info;
+
+ /* initialise the spi */
+
+ s3c2410_gpio_setpin(S3C2410_GPG13, 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+
+ s3c2410_gpio_setpin(S3C2410_GPB7, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPB7, S3C2410_GPIO_OUTPUT);
+
+ s3c2410_gpio_setpin(S3C2410_GPB6, 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPB6, S3C2410_GPIO_OUTPUT);
+
+ s3c2410_gpio_setpin(S3C2410_GPG8, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPG8, S3C2410_GPIO_OUTPUT);
+
+ /* initialise the WM8750 spi */
+
+ s3c2410_gpio_setpin(S3C2410_GPH10, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH10, S3C2410_GPIO_OUTPUT);
+
+ /* Turn off suspend on both USB ports, and switch the
+ * selectable USB port to USB device mode. */
+
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+ s3c24xx_udc_set_platdata(&jive_udc_cfg);
+ s3c24xx_fb_set_platdata(&jive_lcd_config);
+
+ spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs));
+
+ s3c_device_i2c.dev.platform_data = &jive_i2c_cfg;
+ i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
+
+ pm_power_off = jive_power_off;
+
+ platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
+}
+
+MACHINE_START(JIVE, "JIVE")
+ /* Maintainer: Ben Dooks <ben@fluff.org> */
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+
+ .init_irq = s3c24xx_init_irq,
+ .map_io = jive_map_io,
+ .init_machine = jive_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index f1915bd61d15..25de042ab996 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -29,6 +29,7 @@ config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
select CPU_S3C2440
select PM_SIMTEC if PM
+ select HAVE_PATA_PLATFORM
help
Say Y here if you are using the Simtec Electronics ANUBIS
development system
@@ -67,6 +68,11 @@ config SMDK2440_CPU2440
default y if ARCH_S3C2440
select CPU_S3C2440
+config MACH_AT2440EVB
+ bool "Avantech AT2440EVB development board"
+ select CPU_S3C2440
+ help
+ Say Y here if you are using the AT2440EVB development board
endmenu
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index c81ed6248dcb..0b4440e79b90 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o
obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o
obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
+obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 47258915a2f9..09af8b23500b 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2440/mach-anubis.c
*
- * Copyright (c) 2003-2005 Simtec Electronics
+ * Copyright (c) 2003-2005,2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
@@ -17,6 +17,8 @@
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/i2c.h>
#include <linux/sm501.h>
#include <linux/sm501-regs.h>
@@ -241,14 +243,18 @@ static struct s3c2410_platform_nand anubis_nand_info = {
/* IDE channels */
+struct pata_platform_info anubis_ide_platdata = {
+ .ioport_shift = 5,
+};
+
static struct resource anubis_ide0_resource[] = {
{
.start = S3C2410_CS3,
.end = S3C2410_CS3 + (8*32) - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = S3C2410_CS3 + (1<<26),
- .end = S3C2410_CS3 + (1<<26) + (8*32) - 1,
+ .start = S3C2410_CS3 + (1<<26) + (6*32),
+ .end = S3C2410_CS3 + (1<<26) + (7*32) - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_IDE0,
@@ -258,10 +264,14 @@ static struct resource anubis_ide0_resource[] = {
};
static struct platform_device anubis_device_ide0 = {
- .name = "simtec-ide",
+ .name = "pata_platform",
.id = 0,
.num_resources = ARRAY_SIZE(anubis_ide0_resource),
.resource = anubis_ide0_resource,
+ .dev = {
+ .platform_data = &anubis_ide_platdata,
+ .coherent_dma_mask = ~0,
+ },
};
static struct resource anubis_ide1_resource[] = {
@@ -270,8 +280,8 @@ static struct resource anubis_ide1_resource[] = {
.end = S3C2410_CS4 + (8*32) - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = S3C2410_CS4 + (1<<26),
- .end = S3C2410_CS4 + (1<<26) + (8*32) - 1,
+ .start = S3C2410_CS4 + (1<<26) + (6*32),
+ .end = S3C2410_CS4 + (1<<26) + (7*32) - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_IDE0,
@@ -280,12 +290,15 @@ static struct resource anubis_ide1_resource[] = {
},
};
-
static struct platform_device anubis_device_ide1 = {
- .name = "simtec-ide",
+ .name = "pata_platform",
.id = 1,
.num_resources = ARRAY_SIZE(anubis_ide1_resource),
.resource = anubis_ide1_resource,
+ .dev = {
+ .platform_data = &anubis_ide_platdata,
+ .coherent_dma_mask = ~0,
+ },
};
/* Asix AX88796 10/100 ethernet controller */
@@ -409,6 +422,15 @@ static struct clk *anubis_clocks[] = {
&s3c24xx_uclk,
};
+/* I2C devices. */
+
+static struct i2c_board_info anubis_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("tps65011", 0x48),
+ .irq = IRQ_EINT20,
+ }
+};
+
static void __init anubis_map_io(void)
{
/* initialise the clocks */
@@ -448,6 +470,9 @@ static void __init anubis_map_io(void)
static void __init anubis_init(void)
{
platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
+
+ i2c_register_board_info(0, anubis_i2c_devs,
+ ARRAY_SIZE(anubis_i2c_devs));
}
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
new file mode 100644
index 000000000000..f5e3c7f27639
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -0,0 +1,198 @@
+/* linux/arch/arm/mach-s3c2440/mach-at2440evb.c
+ *
+ * Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
+ * Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
+ * and modifications by SBZ <sbz@spgui.org> and
+ * Weibing <http://weibing.blogbus.com>
+ *
+ * For product information, visit http://www.arm9e.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/dm9000.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/plat-s3c/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/plat-s3c/nand.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+static struct map_desc at2440evb_iodesc[] __initdata = {
+ /* Nothing here */
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c24xx_uart_clksrc at2440evb_serial_clocks[] = {
+ [0] = {
+ .name = "uclk",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ },
+ [1] = {
+ .name = "pclk",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ }
+};
+
+
+static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clocks = at2440evb_serial_clocks,
+ .clocks_size = ARRAY_SIZE(at2440evb_serial_clocks),
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clocks = at2440evb_serial_clocks,
+ .clocks_size = ARRAY_SIZE(at2440evb_serial_clocks),
+ },
+};
+
+/* NAND Flash on AT2440EVB board */
+
+static struct mtd_partition at2440evb_default_nand_part[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_256K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "Kernel",
+ .size = SZ_2M,
+ .offset = SZ_256K,
+ },
+ [2] = {
+ .name = "Root",
+ .offset = SZ_256K + SZ_2M,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct s3c2410_nand_set at2440evb_nand_sets[] = {
+ [0] = {
+ .name = "nand",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(at2440evb_default_nand_part),
+ .partitions = at2440evb_default_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand at2440evb_nand_info = {
+ .tacls = 25,
+ .twrph0 = 55,
+ .twrph1 = 40,
+ .nr_sets = ARRAY_SIZE(at2440evb_nand_sets),
+ .sets = at2440evb_nand_sets,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource at2440evb_dm9k_resource[] = {
+ [0] = {
+ .start = S3C2410_CS3,
+ .end = S3C2410_CS3 + 3,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = S3C2410_CS3 + 4,
+ .end = S3C2410_CS3 + 7,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = IRQ_EINT7,
+ .end = IRQ_EINT7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct dm9000_plat_data at2440evb_dm9k_pdata = {
+ .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device at2440evb_device_eth = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(at2440evb_dm9k_resource),
+ .resource = at2440evb_dm9k_resource,
+ .dev = {
+ .platform_data = &at2440evb_dm9k_pdata,
+ },
+};
+
+static struct platform_device *at2440evb_devices[] __initdata = {
+ &s3c_device_usb,
+ &s3c_device_wdt,
+ &s3c_device_adc,
+ &s3c_device_i2c,
+ &s3c_device_rtc,
+ &s3c_device_nand,
+ &at2440evb_device_eth,
+};
+
+static void __init at2440evb_map_io(void)
+{
+ s3c_device_nand.dev.platform_data = &at2440evb_nand_info;
+
+ s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
+ s3c24xx_init_clocks(16934400);
+ s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
+}
+
+static void __init at2440evb_init(void)
+{
+ platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
+}
+
+
+MACHINE_START(AT2440EVB, "AT2440EVB")
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .map_io = at2440evb_map_io,
+ .init_machine = at2440evb_init,
+ .init_irq = s3c24xx_init_irq,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 8a8acdbd072d..af996b0e91e8 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2440/mach-osiris.c
*
- * Copyright (c) 2005 Simtec Electronics
+ * Copyright (c) 2005,2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
@@ -19,6 +19,7 @@
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/clk.h>
+#include <linux/i2c.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -322,6 +323,15 @@ static struct sys_device osiris_pm_sysdev = {
.cls = &osiris_pm_sysclass,
};
+/* I2C devices fitted. */
+
+static struct i2c_board_info osiris_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("tps65011", 0x48),
+ .irq = IRQ_EINT20,
+ },
+};
+
/* Standard Osiris devices */
static struct platform_device *osiris_devices[] __initdata = {
@@ -388,6 +398,9 @@ static void __init osiris_init(void)
sysdev_class_register(&osiris_pm_sysclass);
sysdev_register(&osiris_pm_sysdev);
+ i2c_register_board_info(0, osiris_i2c_devs,
+ ARRAY_SIZE(osiris_i2c_devs));
+
platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
};
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index b42f956738d0..17f064fabdaf 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -81,7 +81,7 @@ static int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
else
clkcon &= ~clocks;
- __raw_writel(clkcon, S3C2443_HCLKCON);
+ __raw_writel(clkcon, S3C2443_PCLKCON);
return 0;
}
@@ -221,7 +221,6 @@ static struct clk clk_mdivclk = {
.get_rate = s3c2443_getrate_mdivclk,
};
-
static int s3c2443_setparent_msysclk(struct clk *clk, struct clk *parent)
{
unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
@@ -249,6 +248,46 @@ static struct clk clk_msysclk = {
.set_parent = s3c2443_setparent_msysclk,
};
+/* armdiv
+ *
+ * this clock is sourced from msysclk and can have a number of
+ * divider values applied to it to then be fed into armclk.
+*/
+
+static struct clk clk_armdiv = {
+ .name = "armdiv",
+ .id = -1,
+ .parent = &clk_msysclk,
+};
+
+/* armclk
+ *
+ * this is the clock fed into the ARM core itself, either from
+ * armdiv or from hclk.
+ */
+
+static int s3c2443_setparent_armclk(struct clk *clk, struct clk *parent)
+{
+ unsigned long clkdiv0;
+
+ clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+
+ if (parent == &clk_armdiv)
+ clkdiv0 &= ~S3C2443_CLKDIV0_DVS;
+ else if (parent == &clk_h)
+ clkdiv0 |= S3C2443_CLKDIV0_DVS;
+ else
+ return -EINVAL;
+
+ __raw_writel(clkdiv0, S3C2443_CLKDIV0);
+ return 0;
+}
+
+static struct clk clk_arm = {
+ .name = "armclk",
+ .id = -1,
+ .set_parent = s3c2443_setparent_armclk,
+};
/* esysclk
*
@@ -639,6 +678,29 @@ static struct clk clk_display = {
.round_rate = s3c2443_roundrate_clksrc256,
};
+/* prediv
+ *
+ * this divides the msysclk down to pass to h/p/etc.
+ */
+
+static unsigned long s3c2443_prediv_getrate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+
+ clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
+ clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
+
+ return rate / (clkdiv0 + 1);
+}
+
+static struct clk clk_prediv = {
+ .name = "prediv",
+ .id = -1,
+ .parent = &clk_msysclk,
+ .get_rate = s3c2443_prediv_getrate,
+};
+
/* standard clock definitions */
static struct clk init_clocks_disable[] = {
@@ -887,6 +949,15 @@ static void __init s3c2443_clk_initparents(void)
}
clk_init_set_parent(&clk_msysclk, parent);
+
+ /* arm */
+
+ if (__raw_readl(S3C2443_CLKDIV0) & S3C2443_CLKDIV0_DVS)
+ parent = &clk_h;
+ else
+ parent = &clk_armdiv;
+
+ clk_init_set_parent(&clk_arm, parent);
}
/* armdiv divisor table */
@@ -909,10 +980,9 @@ static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
}
-static inline unsigned long s3c2443_get_prediv(unsigned long clkcon0)
+static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
{
- clkcon0 &= S3C2443_CLKDIV0_PREDIV_MASK;
- clkcon0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
+ clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
return clkcon0 + 1;
}
@@ -936,6 +1006,9 @@ static struct clk *clks[] __initdata = {
&clk_hsspi,
&clk_hsmmc_div,
&clk_hsmmc,
+ &clk_armdiv,
+ &clk_arm,
+ &clk_prediv,
};
void __init s3c2443_init_clocks(int xtal)
@@ -951,10 +1024,16 @@ void __init s3c2443_init_clocks(int xtal)
int ret;
int ptr;
+ /* s3c2443 parents h and p clocks from prediv */
+ clk_h.parent = &clk_prediv;
+ clk_p.parent = &clk_prediv;
+
pll = s3c2443_get_mpll(mpllcon, xtal);
+ clk_msysclk.rate = pll;
fclk = pll / s3c2443_fclk_div(clkdiv0);
- hclk = fclk / s3c2443_get_prediv(clkdiv0);
+ hclk = s3c2443_prediv_getrate(&clk_prediv);
+ hclk = hclk / s3c2443_get_hdiv(clkdiv0);
hclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_HCLK) ? 2 : 1);
pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 33ed048502a3..3a6c8ec34cd9 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -180,8 +180,21 @@ config CPU_ARM925T
# ARM926T
config CPU_ARM926T
bool "Support ARM926T processor"
- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
+ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || \
+ MACH_VERSATILE_AB || ARCH_OMAP730 || \
+ ARCH_OMAP16XX || MACH_REALVIEW_EB || \
+ ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \
+ ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \
+ ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \
+ ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \
+ ARCH_NS9XXX || ARCH_DAVINCI
+ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || \
+ ARCH_OMAP730 || ARCH_OMAP16XX || \
+ ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \
+ ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \
+ ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \
+ ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \
+ ARCH_NS9XXX || ARCH_DAVINCI || ARCH_MX2
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_PABRT_NOIFAR
@@ -365,7 +378,7 @@ config CPU_XSC3
# Feroceon
config CPU_FEROCEON
bool
- depends on ARCH_ORION5X
+ depends on ARCH_ORION5X || ARCH_LOKI || ARCH_KIRKWOOD || ARCH_MV78XX0
default y
select CPU_32v5
select CPU_ABRT_EV5T
@@ -373,7 +386,7 @@ config CPU_FEROCEON
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_FEROCEON if MMU
- select CPU_TLB_V4WBI if MMU
+ select CPU_TLB_FEROCEON if MMU
config CPU_FEROCEON_OLD_ID
bool "Accept early Feroceon cores with an ARM926 ID"
@@ -551,6 +564,11 @@ config CPU_TLB_V4WBI
ARM Architecture Version 4 TLB with writeback cache and invalidate
instruction cache entry.
+config CPU_TLB_FEROCEON
+ bool
+ help
+ Feroceon TLB (v4wbi with non-outer-cachable page table walks).
+
config CPU_TLB_V6
bool
@@ -709,6 +727,14 @@ config OUTER_CACHE
bool
default n
+config CACHE_FEROCEON_L2
+ bool "Enable the Feroceon L2 cache controller"
+ depends on ARCH_KIRKWOOD || ARCH_MV78XX0
+ default y
+ select OUTER_CACHE
+ help
+ This option enables the Feroceon L2 cache controller.
+
config CACHE_L2X0
bool "Enable the L2x0 outer cache controller"
depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 32b2d2d213a6..f64b92557b11 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_CPU_TLB_V3) += tlb-v3.o
obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o
obj-$(CONFIG_CPU_TLB_V4WB) += tlb-v4wb.o
obj-$(CONFIG_CPU_TLB_V4WBI) += tlb-v4wbi.o
+obj-$(CONFIG_CPU_TLB_FEROCEON) += tlb-v4wbi.o # reuse v4wbi TLB functions
obj-$(CONFIG_CPU_TLB_V6) += tlb-v6.o
obj-$(CONFIG_CPU_TLB_V7) += tlb-v7.o
@@ -73,4 +74,5 @@ obj-$(CONFIG_CPU_FEROCEON) += proc-feroceon.o
obj-$(CONFIG_CPU_V6) += proc-v6.o
obj-$(CONFIG_CPU_V7) += proc-v7.o
+obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
new file mode 100644
index 000000000000..20eec4ba173f
--- /dev/null
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -0,0 +1,318 @@
+/*
+ * arch/arm/mm/cache-feroceon-l2.c - Feroceon L2 cache controller support
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * References:
+ * - Unified Layer 2 Cache for Feroceon CPU Cores,
+ * Document ID MV-S104858-00, Rev. A, October 23 2007.
+ */
+
+#include <linux/init.h>
+#include <asm/cacheflush.h>
+#include <asm/plat-orion/cache-feroceon-l2.h>
+
+
+/*
+ * Low-level cache maintenance operations.
+ *
+ * As well as the regular 'clean/invalidate/flush L2 cache line by
+ * MVA' instructions, the Feroceon L2 cache controller also features
+ * 'clean/invalidate L2 range by MVA' operations.
+ *
+ * Cache range operations are initiated by writing the start and
+ * end addresses to successive cp15 registers, and process every
+ * cache line whose first byte address lies in the inclusive range
+ * [start:end].
+ *
+ * The cache range operations stall the CPU pipeline until completion.
+ *
+ * The range operations require two successive cp15 writes, in
+ * between which we don't want to be preempted.
+ */
+static inline void l2_clean_pa(unsigned long addr)
+{
+ __asm__("mcr p15, 1, %0, c15, c9, 3" : : "r" (addr));
+}
+
+static inline void l2_clean_mva_range(unsigned long start, unsigned long end)
+{
+ unsigned long flags;
+
+ /*
+ * Make sure 'start' and 'end' reference the same page, as
+ * L2 is PIPT and range operations only do a TLB lookup on
+ * the start address.
+ */
+ BUG_ON((start ^ end) & ~(PAGE_SIZE - 1));
+
+ raw_local_irq_save(flags);
+ __asm__("mcr p15, 1, %0, c15, c9, 4" : : "r" (start));
+ __asm__("mcr p15, 1, %0, c15, c9, 5" : : "r" (end));
+ raw_local_irq_restore(flags);
+}
+
+static inline void l2_clean_pa_range(unsigned long start, unsigned long end)
+{
+ l2_clean_mva_range(__phys_to_virt(start), __phys_to_virt(end));
+}
+
+static inline void l2_clean_inv_pa(unsigned long addr)
+{
+ __asm__("mcr p15, 1, %0, c15, c10, 3" : : "r" (addr));
+}
+
+static inline void l2_inv_pa(unsigned long addr)
+{
+ __asm__("mcr p15, 1, %0, c15, c11, 3" : : "r" (addr));
+}
+
+static inline void l2_inv_mva_range(unsigned long start, unsigned long end)
+{
+ unsigned long flags;
+
+ /*
+ * Make sure 'start' and 'end' reference the same page, as
+ * L2 is PIPT and range operations only do a TLB lookup on
+ * the start address.
+ */
+ BUG_ON((start ^ end) & ~(PAGE_SIZE - 1));
+
+ raw_local_irq_save(flags);
+ __asm__("mcr p15, 1, %0, c15, c11, 4" : : "r" (start));
+ __asm__("mcr p15, 1, %0, c15, c11, 5" : : "r" (end));
+ raw_local_irq_restore(flags);
+}
+
+static inline void l2_inv_pa_range(unsigned long start, unsigned long end)
+{
+ l2_inv_mva_range(__phys_to_virt(start), __phys_to_virt(end));
+}
+
+
+/*
+ * Linux primitives.
+ *
+ * Note that the end addresses passed to Linux primitives are
+ * noninclusive, while the hardware cache range operations use
+ * inclusive start and end addresses.
+ */
+#define CACHE_LINE_SIZE 32
+#define MAX_RANGE_SIZE 1024
+
+static int l2_wt_override;
+
+static unsigned long calc_range_end(unsigned long start, unsigned long end)
+{
+ unsigned long range_end;
+
+ BUG_ON(start & (CACHE_LINE_SIZE - 1));
+ BUG_ON(end & (CACHE_LINE_SIZE - 1));
+
+ /*
+ * Try to process all cache lines between 'start' and 'end'.
+ */
+ range_end = end;
+
+ /*
+ * Limit the number of cache lines processed at once,
+ * since cache range operations stall the CPU pipeline
+ * until completion.
+ */
+ if (range_end > start + MAX_RANGE_SIZE)
+ range_end = start + MAX_RANGE_SIZE;
+
+ /*
+ * Cache range operations can't straddle a page boundary.
+ */
+ if (range_end > (start | (PAGE_SIZE - 1)) + 1)
+ range_end = (start | (PAGE_SIZE - 1)) + 1;
+
+ return range_end;
+}
+
+static void feroceon_l2_inv_range(unsigned long start, unsigned long end)
+{
+ /*
+ * Clean and invalidate partial first cache line.
+ */
+ if (start & (CACHE_LINE_SIZE - 1)) {
+ l2_clean_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
+ start = (start | (CACHE_LINE_SIZE - 1)) + 1;
+ }
+
+ /*
+ * Clean and invalidate partial last cache line.
+ */
+ if (end & (CACHE_LINE_SIZE - 1)) {
+ l2_clean_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
+ end &= ~(CACHE_LINE_SIZE - 1);
+ }
+
+ /*
+ * Invalidate all full cache lines between 'start' and 'end'.
+ */
+ while (start != end) {
+ unsigned long range_end = calc_range_end(start, end);
+ l2_inv_pa_range(start, range_end - CACHE_LINE_SIZE);
+ start = range_end;
+ }
+
+ dsb();
+}
+
+static void feroceon_l2_clean_range(unsigned long start, unsigned long end)
+{
+ /*
+ * If L2 is forced to WT, the L2 will always be clean and we
+ * don't need to do anything here.
+ */
+ if (!l2_wt_override) {
+ start &= ~(CACHE_LINE_SIZE - 1);
+ end = (end + CACHE_LINE_SIZE - 1) & ~(CACHE_LINE_SIZE - 1);
+ while (start != end) {
+ unsigned long range_end = calc_range_end(start, end);
+ l2_clean_pa_range(start, range_end - CACHE_LINE_SIZE);
+ start = range_end;
+ }
+ }
+
+ dsb();
+}
+
+static void feroceon_l2_flush_range(unsigned long start, unsigned long end)
+{
+ start &= ~(CACHE_LINE_SIZE - 1);
+ end = (end + CACHE_LINE_SIZE - 1) & ~(CACHE_LINE_SIZE - 1);
+ while (start != end) {
+ unsigned long range_end = calc_range_end(start, end);
+ if (!l2_wt_override)
+ l2_clean_pa_range(start, range_end - CACHE_LINE_SIZE);
+ l2_inv_pa_range(start, range_end - CACHE_LINE_SIZE);
+ start = range_end;
+ }
+
+ dsb();
+}
+
+
+/*
+ * Routines to disable and re-enable the D-cache and I-cache at run
+ * time. These are necessary because the L2 cache can only be enabled
+ * or disabled while the L1 Dcache and Icache are both disabled.
+ */
+static void __init invalidate_and_disable_dcache(void)
+{
+ u32 cr;
+
+ cr = get_cr();
+ if (cr & CR_C) {
+ unsigned long flags;
+
+ raw_local_irq_save(flags);
+ flush_cache_all();
+ set_cr(cr & ~CR_C);
+ raw_local_irq_restore(flags);
+ }
+}
+
+static void __init enable_dcache(void)
+{
+ u32 cr;
+
+ cr = get_cr();
+ if (!(cr & CR_C))
+ set_cr(cr | CR_C);
+}
+
+static void __init __invalidate_icache(void)
+{
+ int dummy;
+
+ __asm__ __volatile__("mcr p15, 0, %0, c7, c5, 0\n" : "=r" (dummy));
+}
+
+static void __init invalidate_and_disable_icache(void)
+{
+ u32 cr;
+
+ cr = get_cr();
+ if (cr & CR_I) {
+ set_cr(cr & ~CR_I);
+ __invalidate_icache();
+ }
+}
+
+static void __init enable_icache(void)
+{
+ u32 cr;
+
+ cr = get_cr();
+ if (!(cr & CR_I))
+ set_cr(cr | CR_I);
+}
+
+static inline u32 read_extra_features(void)
+{
+ u32 u;
+
+ __asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (u));
+
+ return u;
+}
+
+static inline void write_extra_features(u32 u)
+{
+ __asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u));
+}
+
+static void __init disable_l2_prefetch(void)
+{
+ u32 u;
+
+ /*
+ * Read the CPU Extra Features register and verify that the
+ * Disable L2 Prefetch bit is set.
+ */
+ u = read_extra_features();
+ if (!(u & 0x01000000)) {
+ printk(KERN_INFO "Feroceon L2: Disabling L2 prefetch.\n");
+ write_extra_features(u | 0x01000000);
+ }
+}
+
+static void __init enable_l2(void)
+{
+ u32 u;
+
+ u = read_extra_features();
+ if (!(u & 0x00400000)) {
+ printk(KERN_INFO "Feroceon L2: Enabling L2\n");
+
+ invalidate_and_disable_dcache();
+ invalidate_and_disable_icache();
+ write_extra_features(u | 0x00400000);
+ enable_icache();
+ enable_dcache();
+ }
+}
+
+void __init feroceon_l2_init(int __l2_wt_override)
+{
+ l2_wt_override = __l2_wt_override;
+
+ disable_l2_prefetch();
+
+ outer_cache.inv_range = feroceon_l2_inv_range;
+ outer_cache.clean_range = feroceon_l2_clean_range;
+ outer_cache.flush_range = feroceon_l2_flush_range;
+
+ enable_l2();
+
+ printk(KERN_INFO "Feroceon L2: Cache support initialised%s.\n",
+ l2_wt_override ? ", in WT override mode" : "");
+}
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index 44558d5f9313..fbfa26058442 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -144,13 +144,17 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
page = pfn_to_page(pfn);
mapping = page_mapping(page);
if (mapping) {
+#ifndef CONFIG_SMP
int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
if (dirty)
__flush_dcache_page(mapping, page);
+#endif
if (cache_is_vivt())
make_coherent(mapping, vma, addr, pfn);
+ else if (vma->vm_flags & VM_EXEC)
+ __flush_icache_all();
}
}
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 9df507d36e0b..029ee65fda2b 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -199,6 +199,8 @@ void flush_dcache_page(struct page *page)
__flush_dcache_page(mapping, page);
if (mapping && cache_is_vivt())
__flush_dcache_aliases(mapping, page);
+ else if (mapping)
+ __flush_icache_all();
}
}
EXPORT_SYMBOL(flush_dcache_page);
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index a02c1712b52d..f2e5884c513a 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -44,11 +44,31 @@
*/
#define CACHE_DLINESIZE 32
+ .bss
+ .align 3
+__cache_params_loc:
+ .space 8
+
.text
+__cache_params:
+ .word __cache_params_loc
+
/*
* cpu_feroceon_proc_init()
*/
ENTRY(cpu_feroceon_proc_init)
+ mrc p15, 0, r0, c0, c0, 1 @ read cache type register
+ ldr r1, __cache_params
+ mov r2, #(16 << 5)
+ tst r0, #(1 << 16) @ get way
+ mov r0, r0, lsr #18 @ get cache size order
+ movne r3, #((4 - 1) << 30) @ 4-way
+ and r0, r0, #0xf
+ moveq r3, #0 @ 1-way
+ mov r2, r2, lsl r0 @ actual cache size
+ movne r2, r2, lsr #2 @ turned into # of sets
+ sub r2, r2, #(1 << 5)
+ stmia r1, {r2, r3}
mov pc, lr
/*
@@ -59,6 +79,13 @@ ENTRY(cpu_feroceon_proc_fin)
mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
msr cpsr_c, ip
bl feroceon_flush_kern_cache_all
+
+#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
+ mov r0, #0
+ mcr p15, 1, r0, c15, c9, 0 @ clean L2
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+#endif
+
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x000e @ ............wca.
@@ -117,11 +144,19 @@ ENTRY(feroceon_flush_user_cache_all)
*/
ENTRY(feroceon_flush_kern_cache_all)
mov r2, #VM_EXEC
- mov ip, #0
+
__flush_whole_cache:
-1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate
- bne 1b
+ ldr r1, __cache_params
+ ldmia r1, {r1, r3}
+1: orr ip, r1, r3
+2: mcr p15, 0, ip, c7, c14, 2 @ clean + invalidate D set/way
+ subs ip, ip, #(1 << 30) @ next way
+ bcs 2b
+ subs r1, r1, #(1 << 5) @ next set
+ bcs 1b
+
tst r2, #VM_EXEC
+ mov ip, #0
mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcrne p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
@@ -138,7 +173,6 @@ __flush_whole_cache:
*/
.align 5
ENTRY(feroceon_flush_user_cache_range)
- mov ip, #0
sub r3, r1, r0 @ calculate total size
cmp r3, #CACHE_DLIMIT
bgt __flush_whole_cache
@@ -152,6 +186,7 @@ ENTRY(feroceon_flush_user_cache_range)
cmp r0, r1
blo 1b
tst r2, #VM_EXEC
+ mov ip, #0
mcrne p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
@@ -209,6 +244,20 @@ ENTRY(feroceon_flush_kern_dcache_page)
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+ .align 5
+ENTRY(feroceon_range_flush_kern_dcache_page)
+ mrs r2, cpsr
+ add r1, r0, #PAGE_SZ - CACHE_DLINESIZE @ top addr is inclusive
+ orr r3, r2, #PSR_I_BIT
+ msr cpsr_c, r3 @ disable interrupts
+ mcr p15, 5, r0, c15, c15, 0 @ D clean/inv range start
+ mcr p15, 5, r1, c15, c15, 1 @ D clean/inv range top
+ msr cpsr_c, r2 @ restore interrupts
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
/*
* dma_inv_range(start, end)
*
@@ -225,10 +274,10 @@ ENTRY(feroceon_flush_kern_dcache_page)
.align 5
ENTRY(feroceon_dma_inv_range)
tst r0, #CACHE_DLINESIZE - 1
+ bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
tst r1, #CACHE_DLINESIZE - 1
mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
- bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
@@ -236,6 +285,22 @@ ENTRY(feroceon_dma_inv_range)
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+ .align 5
+ENTRY(feroceon_range_dma_inv_range)
+ mrs r2, cpsr
+ tst r0, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
+ tst r1, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
+ cmp r1, r0
+ subne r1, r1, #1 @ top address is inclusive
+ orr r3, r2, #PSR_I_BIT
+ msr cpsr_c, r3 @ disable interrupts
+ mcr p15, 5, r0, c15, c14, 0 @ D inv range start
+ mcr p15, 5, r1, c15, c14, 1 @ D inv range top
+ msr cpsr_c, r2 @ restore interrupts
+ mov pc, lr
+
/*
* dma_clean_range(start, end)
*
@@ -256,6 +321,19 @@ ENTRY(feroceon_dma_clean_range)
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+ .align 5
+ENTRY(feroceon_range_dma_clean_range)
+ mrs r2, cpsr
+ cmp r1, r0
+ subne r1, r1, #1 @ top address is inclusive
+ orr r3, r2, #PSR_I_BIT
+ msr cpsr_c, r3 @ disable interrupts
+ mcr p15, 5, r0, c15, c13, 0 @ D clean range start
+ mcr p15, 5, r1, c15, c13, 1 @ D clean range top
+ msr cpsr_c, r2 @ restore interrupts
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
/*
* dma_flush_range(start, end)
*
@@ -274,6 +352,19 @@ ENTRY(feroceon_dma_flush_range)
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+ .align 5
+ENTRY(feroceon_range_dma_flush_range)
+ mrs r2, cpsr
+ cmp r1, r0
+ subne r1, r1, #1 @ top address is inclusive
+ orr r3, r2, #PSR_I_BIT
+ msr cpsr_c, r3 @ disable interrupts
+ mcr p15, 5, r0, c15, c15, 0 @ D clean/inv range start
+ mcr p15, 5, r1, c15, c15, 1 @ D clean/inv range top
+ msr cpsr_c, r2 @ restore interrupts
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
ENTRY(feroceon_cache_fns)
.long feroceon_flush_kern_cache_all
.long feroceon_flush_user_cache_all
@@ -285,12 +376,33 @@ ENTRY(feroceon_cache_fns)
.long feroceon_dma_clean_range
.long feroceon_dma_flush_range
+ENTRY(feroceon_range_cache_fns)
+ .long feroceon_flush_kern_cache_all
+ .long feroceon_flush_user_cache_all
+ .long feroceon_flush_user_cache_range
+ .long feroceon_coherent_kern_range
+ .long feroceon_coherent_user_range
+ .long feroceon_range_flush_kern_dcache_page
+ .long feroceon_range_dma_inv_range
+ .long feroceon_range_dma_clean_range
+ .long feroceon_range_dma_flush_range
+
.align 5
ENTRY(cpu_feroceon_dcache_clean_area)
+#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
+ mov r2, r0
+ mov r3, r1
+#endif
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
subs r1, r1, #CACHE_DLINESIZE
bhi 1b
+#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
+1: mcr p15, 1, r2, c15, c9, 1 @ clean L2 entry
+ add r2, r2, #CACHE_DLINESIZE
+ subs r3, r3, #CACHE_DLINESIZE
+ bhi 1b
+#endif
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
@@ -306,16 +418,25 @@ ENTRY(cpu_feroceon_dcache_clean_area)
.align 5
ENTRY(cpu_feroceon_switch_mm)
#ifdef CONFIG_MMU
- mov ip, #0
-@ && 'Clean & Invalidate whole DCache'
-1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate
- bne 1b
- mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
- mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ /*
+ * Note: we wish to call __flush_whole_cache but we need to preserve
+ * lr to do so. The only way without touching main memory is to
+ * use r2 which is normally used to test the VM_EXEC flag, and
+ * compensate locally for the skipped ops if it is not set.
+ */
+ mov r2, lr @ abuse r2 to preserve lr
+ bl __flush_whole_cache
+ @ if r2 contains the VM_EXEC bit then the next 2 ops are done already
+ tst r2, #VM_EXEC
+ mcreq p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcreq p15, 0, ip, c7, c10, 4 @ drain WB
+
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
-#endif
+ mov pc, r2
+#else
mov pc, lr
+#endif
/*
* cpu_feroceon_set_pte_ext(ptep, pte, ext)
@@ -345,6 +466,9 @@ ENTRY(cpu_feroceon_set_pte_ext)
str r2, [r0] @ hardware version
mov r0, r0
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
+ mcr p15, 1, r0, c15, c9, 1 @ clean L2 entry
+#endif
mcr p15, 0, r0, c7, c10, 4 @ drain WB
#endif
mov pc, lr
@@ -369,14 +493,15 @@ __feroceon_setup:
.size __feroceon_setup, . - __feroceon_setup
/*
- * R
- * .RVI ZFRS BLDP WCAM
- * .011 0001 ..11 0101
+ * B
+ * R P
+ * .RVI UFRS BLDP WCAM
+ * .011 .001 ..11 0101
*
*/
.type feroceon_crval, #object
feroceon_crval:
- crval clear=0x00007f3f, mmuset=0x00003135, ucset=0x00001134
+ crval clear=0x0000773f, mmuset=0x00003135, ucset=0x00001134
__INITDATA
@@ -414,6 +539,21 @@ cpu_feroceon_name:
.asciz "Feroceon"
.size cpu_feroceon_name, . - cpu_feroceon_name
+ .type cpu_88fr531_name, #object
+cpu_88fr531_name:
+ .asciz "Feroceon 88FR531-vd"
+ .size cpu_88fr531_name, . - cpu_88fr531_name
+
+ .type cpu_88fr571_name, #object
+cpu_88fr571_name:
+ .asciz "Feroceon 88FR571-vd"
+ .size cpu_88fr571_name, . - cpu_88fr571_name
+
+ .type cpu_88fr131_name, #object
+cpu_88fr131_name:
+ .asciz "Feroceon 88FR131"
+ .size cpu_88fr131_name, . - cpu_88fr131_name
+
.align
.section ".proc.info.init", #alloc, #execinstr
@@ -421,15 +561,15 @@ cpu_feroceon_name:
#ifdef CONFIG_CPU_FEROCEON_OLD_ID
.type __feroceon_old_id_proc_info,#object
__feroceon_old_id_proc_info:
- .long 0x41069260
- .long 0xfffffff0
- .long PMD_TYPE_SECT | \
+ .long 0x41009260
+ .long 0xff00fff0
+ .long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
+ .long PMD_TYPE_SECT | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
@@ -445,17 +585,17 @@ __feroceon_old_id_proc_info:
.size __feroceon_old_id_proc_info, . - __feroceon_old_id_proc_info
#endif
- .type __feroceon_proc_info,#object
-__feroceon_proc_info:
+ .type __88fr531_proc_info,#object
+__88fr531_proc_info:
.long 0x56055310
.long 0xfffffff0
- .long PMD_TYPE_SECT | \
+ .long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
+ .long PMD_TYPE_SECT | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
@@ -463,9 +603,59 @@ __feroceon_proc_info:
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
- .long cpu_feroceon_name
+ .long cpu_88fr531_name
.long feroceon_processor_functions
.long v4wbi_tlb_fns
.long feroceon_user_fns
.long feroceon_cache_fns
- .size __feroceon_proc_info, . - __feroceon_proc_info
+ .size __88fr531_proc_info, . - __88fr531_proc_info
+
+ .type __88fr571_proc_info,#object
+__88fr571_proc_info:
+ .long 0x56155710
+ .long 0xfffffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __feroceon_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_88fr571_name
+ .long feroceon_processor_functions
+ .long v4wbi_tlb_fns
+ .long feroceon_user_fns
+ .long feroceon_range_cache_fns
+ .size __88fr571_proc_info, . - __88fr571_proc_info
+
+ .type __88fr131_proc_info,#object
+__88fr131_proc_info:
+ .long 0x56251310
+ .long 0xfffffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __feroceon_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_88fr131_name
+ .long feroceon_processor_functions
+ .long v4wbi_tlb_fns
+ .long feroceon_user_fns
+ .long feroceon_range_cache_fns
+ .size __88fr131_proc_info, . - __88fr131_proc_info
diff --git a/arch/arm/plat-iop/gpio.c b/arch/arm/plat-iop/gpio.c
index eda436083417..640e498c12ef 100644
--- a/arch/arm/plat-iop/gpio.c
+++ b/arch/arm/plat-iop/gpio.c
@@ -11,6 +11,10 @@
*/
#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
#include <asm/hardware/iop3xx.h>
void gpio_line_config(int line, int direction)
@@ -46,3 +50,42 @@ void gpio_line_set(int line, int value)
local_irq_restore(flags);
}
EXPORT_SYMBOL(gpio_line_set);
+
+static int iop3xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+ gpio_line_config(gpio, GPIO_IN);
+ return 0;
+}
+
+static int iop3xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int level)
+{
+ gpio_line_set(gpio, level);
+ gpio_line_config(gpio, GPIO_OUT);
+ return 0;
+}
+
+static int iop3xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+ return gpio_line_get(gpio);
+}
+
+static void iop3xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
+{
+ gpio_line_set(gpio, value);
+}
+
+static struct gpio_chip iop3xx_chip = {
+ .label = "iop3xx",
+ .direction_input = iop3xx_gpio_direction_input,
+ .get = iop3xx_gpio_get_value,
+ .direction_output = iop3xx_gpio_direction_output,
+ .set = iop3xx_gpio_set_value,
+ .base = 0,
+ .ngpio = IOP3XX_N_GPIOS,
+};
+
+static int __init iop3xx_gpio_setup(void)
+{
+ return gpiochip_add(&iop3xx_chip);
+}
+arch_initcall(iop3xx_gpio_setup);
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index bb6e12738fb3..e14eaad11dd5 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -3,9 +3,14 @@ if ARCH_MXC
menu "Freescale MXC Implementations"
choice
- prompt "MXC/iMX System Type"
+ prompt "MXC/iMX Base Type"
default ARCH_MX3
+config ARCH_MX2
+ bool "MX2-based"
+ help
+ This enables support for systems based on the Freescale i.MX2 family
+
config ARCH_MX3
bool "MX3-based"
help
@@ -13,6 +18,7 @@ config ARCH_MX3
endchoice
+source "arch/arm/mach-mx2/Kconfig"
source "arch/arm/mach-mx3/Kconfig"
endmenu
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index f96dc0362068..db66e9ae8414 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -3,4 +3,6 @@
#
# Common support
-obj-y := irq.o
+obj-y := irq.o clock.o gpio.o time.o
+
+obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
new file mode 100644
index 000000000000..1aa86fd60d71
--- /dev/null
+++ b/arch/arm/plat-mxc/clock.c
@@ -0,0 +1,331 @@
+/*
+ * Based on arch/arm/plat-omap/clock.c
+ *
+ * Copyright (C) 2004 - 2005 Nokia corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+/* #define DEBUG */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/proc_fs.h>
+#include <linux/semaphore.h>
+#include <linux/string.h>
+#include <linux/version.h>
+
+#include <asm/arch/clock.h>
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+
+/*-------------------------------------------------------------------------
+ * Standard clock functions defined in include/linux/clk.h
+ *-------------------------------------------------------------------------*/
+
+/*
+ * Retrieve a clock by name.
+ *
+ * Note that we first try to use device id on the bus
+ * and clock name. If this fails, we try to use "<name>.<id>". If this fails,
+ * we try to use clock name only.
+ * The reference count to the clock's module owner ref count is incremented.
+ */
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ struct clk *p, *clk = ERR_PTR(-ENOENT);
+ int idno;
+ const char *str;
+
+ if (id == NULL)
+ return clk;
+
+ if (dev == NULL || dev->bus != &platform_bus_type)
+ idno = -1;
+ else
+ idno = to_platform_device(dev)->id;
+
+ mutex_lock(&clocks_mutex);
+
+ list_for_each_entry(p, &clocks, node) {
+ if (p->id == idno &&
+ strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+ clk = p;
+ goto found;
+ }
+ }
+
+ str = strrchr(id, '.');
+ if (str) {
+ int cnt = str - id;
+ str++;
+ idno = simple_strtol(str, NULL, 10);
+ list_for_each_entry(p, &clocks, node) {
+ if (p->id == idno &&
+ strlen(p->name) == cnt &&
+ strncmp(id, p->name, cnt) == 0 &&
+ try_module_get(p->owner)) {
+ clk = p;
+ goto found;
+ }
+ }
+ }
+
+ list_for_each_entry(p, &clocks, node) {
+ if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+ clk = p;
+ goto found;
+ }
+ }
+
+ printk(KERN_WARNING "clk: Unable to get requested clock: %s\n", id);
+
+found:
+ mutex_unlock(&clocks_mutex);
+
+ return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+static void __clk_disable(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return;
+
+ __clk_disable(clk->parent);
+ __clk_disable(clk->secondary);
+
+ if (!(--clk->usecount) && clk->disable)
+ clk->disable(clk);
+}
+
+static int __clk_enable(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ __clk_enable(clk->parent);
+ __clk_enable(clk->secondary);
+
+ if (clk->usecount++ == 0 && clk->enable)
+ clk->enable(clk);
+
+ return 0;
+}
+
+/* This function increments the reference count on the clock and enables the
+ * clock if not already enabled. The parent clock tree is recursively enabled
+ */
+int clk_enable(struct clk *clk)
+{
+ int ret = 0;
+
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ mutex_lock(&clocks_mutex);
+ ret = __clk_enable(clk);
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+/* This function decrements the reference count on the clock and disables
+ * the clock when reference count is 0. The parent clock tree is
+ * recursively disabled
+ */
+void clk_disable(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return;
+
+ mutex_lock(&clocks_mutex);
+ __clk_disable(clk);
+ mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_disable);
+
+/* Retrieve the *current* clock rate. If the clock itself
+ * does not provide a special calculation routine, ask
+ * its parent and so on, until one is able to return
+ * a valid clock rate
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return 0UL;
+
+ if (clk->get_rate)
+ return clk->get_rate(clk);
+
+ return clk_get_rate(clk->parent);
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/* Decrement the clock's module reference count */
+void clk_put(struct clk *clk)
+{
+ if (clk && !IS_ERR(clk))
+ module_put(clk->owner);
+}
+EXPORT_SYMBOL(clk_put);
+
+/* Round the requested clock rate to the nearest supported
+ * rate that is less than or equal to the requested rate.
+ * This is dependent on the clock's current parent.
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ if (clk == NULL || IS_ERR(clk) || !clk->round_rate)
+ return 0;
+
+ return clk->round_rate(clk, rate);
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+/* Set the clock to the requested clock rate. The rate must
+ * match a supported rate exactly based on what clk_round_rate returns
+ */
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ int ret = -EINVAL;
+
+ if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0)
+ return ret;
+
+ mutex_lock(&clocks_mutex);
+ ret = clk->set_rate(clk, rate);
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/* Set the clock's parent to another clock source */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ int ret = -EINVAL;
+
+ if (clk == NULL || IS_ERR(clk) || parent == NULL ||
+ IS_ERR(parent) || clk->set_parent == NULL)
+ return ret;
+
+ mutex_lock(&clocks_mutex);
+ ret = clk->set_parent(clk, parent);
+ if (ret == 0)
+ clk->parent = parent;
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+/* Retrieve the clock's parent clock source */
+struct clk *clk_get_parent(struct clk *clk)
+{
+ struct clk *ret = NULL;
+
+ if (clk == NULL || IS_ERR(clk))
+ return ret;
+
+ return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+/*
+ * Add a new clock to the clock tree.
+ */
+int clk_register(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ mutex_lock(&clocks_mutex);
+ list_add(&clk->node, &clocks);
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+/* Remove a clock from the clock tree */
+void clk_unregister(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return;
+
+ mutex_lock(&clocks_mutex);
+ list_del(&clk->node);
+ mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+#ifdef CONFIG_PROC_FS
+static int mxc_clock_read_proc(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ struct clk *clkp;
+ char *p = page;
+ int len;
+
+ list_for_each_entry(clkp, &clocks, node) {
+ p += sprintf(p, "%s-%d:\t\t%lu, %d", clkp->name, clkp->id,
+ clk_get_rate(clkp), clkp->usecount);
+ if (clkp->parent)
+ p += sprintf(p, ", %s-%d\n", clkp->parent->name,
+ clkp->parent->id);
+ else
+ p += sprintf(p, "\n");
+ }
+
+ len = (p - page) - off;
+ if (len < 0)
+ len = 0;
+
+ *eof = (len <= count) ? 1 : 0;
+ *start = page + off;
+
+ return len;
+}
+
+static int __init mxc_setup_proc_entry(void)
+{
+ struct proc_dir_entry *res;
+
+ res = create_proc_read_entry("cpu/clocks", 0, NULL,
+ mxc_clock_read_proc, NULL);
+ if (!res) {
+ printk(KERN_ERR "Failed to create proc/cpu/clocks\n");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+late_initcall(mxc_setup_proc_entry);
+#endif
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
new file mode 100644
index 000000000000..4a7736717d86
--- /dev/null
+++ b/arch/arm/plat-mxc/gpio.c
@@ -0,0 +1,253 @@
+/*
+ * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * Based on code from Freescale,
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <asm/hardware.h>
+#include <asm-generic/bug.h>
+
+static struct mxc_gpio_port *mxc_gpio_ports;
+static int gpio_table_size;
+
+/* Note: This driver assumes 32 GPIOs are handled in one register */
+
+static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index)
+{
+ __raw_writel(1 << index, port->base + GPIO_ISR);
+}
+
+static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index,
+ int enable)
+{
+ u32 l;
+
+ l = __raw_readl(port->base + GPIO_IMR);
+ l = (l & (~(1 << index))) | (!!enable << index);
+ __raw_writel(l, port->base + GPIO_IMR);
+}
+
+static void gpio_ack_irq(u32 irq)
+{
+ u32 gpio = irq_to_gpio(irq);
+ _clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f);
+}
+
+static void gpio_mask_irq(u32 irq)
+{
+ u32 gpio = irq_to_gpio(irq);
+ _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0);
+}
+
+static void gpio_unmask_irq(u32 irq)
+{
+ u32 gpio = irq_to_gpio(irq);
+ _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1);
+}
+
+static int gpio_set_irq_type(u32 irq, u32 type)
+{
+ u32 gpio = irq_to_gpio(irq);
+ struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
+ u32 bit, val;
+ int edge;
+ void __iomem *reg = port->base;
+
+ switch (type) {
+ case IRQT_RISING:
+ edge = GPIO_INT_RISE_EDGE;
+ break;
+ case IRQT_FALLING:
+ edge = GPIO_INT_FALL_EDGE;
+ break;
+ case IRQT_LOW:
+ edge = GPIO_INT_LOW_LEV;
+ break;
+ case IRQT_HIGH:
+ edge = GPIO_INT_HIGH_LEV;
+ break;
+ default: /* this includes IRQT_BOTHEDGE */
+ return -EINVAL;
+ }
+
+ reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
+ bit = gpio & 0xf;
+ val = __raw_readl(reg) & ~(0x3 << (bit << 1));
+ __raw_writel(val | (edge << (bit << 1)), reg);
+ _clear_gpio_irqstatus(port, gpio & 0x1f);
+
+ return 0;
+}
+
+/* handle n interrupts in one status register */
+static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
+{
+ u32 gpio_irq_no;
+
+ gpio_irq_no = port->virtual_irq_start;
+ for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
+
+ if ((irq_stat & 1) == 0)
+ continue;
+
+ BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
+ irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
+ &irq_desc[gpio_irq_no]);
+ }
+}
+
+#ifdef CONFIG_ARCH_MX3
+/* MX3 has one interrupt *per* gpio port */
+static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+ u32 irq_stat;
+ struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq);
+
+ irq_stat = __raw_readl(port->base + GPIO_ISR) &
+ __raw_readl(port->base + GPIO_IMR);
+ BUG_ON(!irq_stat);
+ mxc_gpio_irq_handler(port, irq_stat);
+}
+#endif
+
+#ifdef CONFIG_ARCH_MX2
+/* MX2 has one interrupt *for all* gpio ports */
+static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+ int i;
+ u32 irq_msk, irq_stat;
+ struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq);
+
+ /* walk through all interrupt status registers */
+ for (i = 0; i < gpio_table_size; i++) {
+ irq_msk = __raw_readl(port[i].base + GPIO_IMR);
+ if (!irq_msk)
+ continue;
+
+ irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk;
+ if (irq_stat)
+ mxc_gpio_irq_handler(&port[i], irq_stat);
+ }
+}
+#endif
+
+static struct irq_chip gpio_irq_chip = {
+ .ack = gpio_ack_irq,
+ .mask = gpio_mask_irq,
+ .unmask = gpio_unmask_irq,
+ .set_type = gpio_set_irq_type,
+};
+
+static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
+ int dir)
+{
+ struct mxc_gpio_port *port =
+ container_of(chip, struct mxc_gpio_port, chip);
+ u32 l;
+
+ l = __raw_readl(port->base + GPIO_GDIR);
+ if (dir)
+ l |= 1 << offset;
+ else
+ l &= ~(1 << offset);
+ __raw_writel(l, port->base + GPIO_GDIR);
+}
+
+static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct mxc_gpio_port *port =
+ container_of(chip, struct mxc_gpio_port, chip);
+ void __iomem *reg = port->base + GPIO_DR;
+ u32 l;
+
+ l = (__raw_readl(reg) & (~(1 << offset))) | (value << offset);
+ __raw_writel(l, reg);
+}
+
+static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct mxc_gpio_port *port =
+ container_of(chip, struct mxc_gpio_port, chip);
+
+ return (__raw_readl(port->base + GPIO_DR) >> offset) & 1;
+}
+
+static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ _set_gpio_direction(chip, offset, 0);
+ return 0;
+}
+
+static int mxc_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ _set_gpio_direction(chip, offset, 1);
+ mxc_gpio_set(chip, offset, value);
+ return 0;
+}
+
+int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
+{
+ int i, j;
+
+ /* save for local usage */
+ mxc_gpio_ports = port;
+ gpio_table_size = cnt;
+
+ printk(KERN_INFO "MXC GPIO hardware\n");
+
+ for (i = 0; i < cnt; i++) {
+ /* disable the interrupt and clear the status */
+ __raw_writel(0, port[i].base + GPIO_IMR);
+ __raw_writel(~0, port[i].base + GPIO_ISR);
+ for (j = port[i].virtual_irq_start;
+ j < port[i].virtual_irq_start + 32; j++) {
+ set_irq_chip(j, &gpio_irq_chip);
+ set_irq_handler(j, handle_edge_irq);
+ set_irq_flags(j, IRQF_VALID);
+ }
+
+ /* register gpio chip */
+ port[i].chip.direction_input = mxc_gpio_direction_input;
+ port[i].chip.direction_output = mxc_gpio_direction_output;
+ port[i].chip.get = mxc_gpio_get;
+ port[i].chip.set = mxc_gpio_set;
+ port[i].chip.base = i * 32;
+ port[i].chip.ngpio = 32;
+
+ /* its a serious configuration bug when it fails */
+ BUG_ON( gpiochip_add(&port[i].chip) < 0 );
+
+#ifdef CONFIG_ARCH_MX3
+ /* setup one handler for each entry */
+ set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
+ set_irq_data(port[i].irq, &port[i]);
+#endif
+ }
+
+#ifdef CONFIG_ARCH_MX2
+ /* setup one handler for all GPIO interrupts */
+ set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler);
+ set_irq_data(port[0].irq, port);
+#endif
+ return 0;
+}
diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c
new file mode 100644
index 000000000000..1985571eb40c
--- /dev/null
+++ b/arch/arm/plat-mxc/iomux-mx1-mx2.c
@@ -0,0 +1,156 @@
+/*
+ * arch/arm/mach-mxc/generic.c
+ *
+ * author: Sascha Hauer
+ * Created: april 20th, 2004
+ * Copyright: Synertronixx GmbH
+ *
+ * Common code for i.MX machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/gpio.h>
+
+#include <asm/hardware.h>
+#include <asm/mach/map.h>
+#include <asm/arch/iomux-mx1-mx2.h>
+
+void mxc_gpio_mode(int gpio_mode)
+{
+ unsigned int pin = gpio_mode & GPIO_PIN_MASK;
+ unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
+ unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
+ unsigned int tmp;
+
+ /* Pullup enable */
+ tmp = __raw_readl(VA_GPIO_BASE + MXC_PUEN(port));
+ if (gpio_mode & GPIO_PUEN)
+ tmp |= (1 << pin);
+ else
+ tmp &= ~(1 << pin);
+ __raw_writel(tmp, VA_GPIO_BASE + MXC_PUEN(port));
+
+ /* Data direction */
+ tmp = __raw_readl(VA_GPIO_BASE + MXC_DDIR(port));
+ if (gpio_mode & GPIO_OUT)
+ tmp |= 1 << pin;
+ else
+ tmp &= ~(1 << pin);
+ __raw_writel(tmp, VA_GPIO_BASE + MXC_DDIR(port));
+
+ /* Primary / alternate function */
+ tmp = __raw_readl(VA_GPIO_BASE + MXC_GPR(port));
+ if (gpio_mode & GPIO_AF)
+ tmp |= (1 << pin);
+ else
+ tmp &= ~(1 << pin);
+ __raw_writel(tmp, VA_GPIO_BASE + MXC_GPR(port));
+
+ /* use as gpio? */
+ tmp = __raw_readl(VA_GPIO_BASE + MXC_GIUS(port));
+ if (gpio_mode & (GPIO_PF | GPIO_AF))
+ tmp &= ~(1 << pin);
+ else
+ tmp |= (1 << pin);
+ __raw_writel(tmp, VA_GPIO_BASE + MXC_GIUS(port));
+
+ if (pin < 16) {
+ tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR1(port));
+ tmp &= ~(3 << (pin * 2));
+ tmp |= (ocr << (pin * 2));
+ __raw_writel(tmp, VA_GPIO_BASE + MXC_OCR1(port));
+
+ tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA1(port));
+ tmp &= ~(3 << (pin * 2));
+ tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
+ __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA1(port));
+
+ tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB1(port));
+ tmp &= ~(3 << (pin * 2));
+ tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
+ __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB1(port));
+ } else {
+ pin -= 16;
+
+ tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR2(port));
+ tmp &= ~(3 << (pin * 2));
+ tmp |= (ocr << (pin * 2));
+ __raw_writel(tmp, VA_GPIO_BASE + MXC_OCR2(port));
+
+ tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA2(port));
+ tmp &= ~(3 << (pin * 2));
+ tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
+ __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA2(port));
+
+ tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB2(port));
+ tmp &= ~(3 << (pin * 2));
+ tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
+ __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB2(port));
+ }
+}
+EXPORT_SYMBOL(mxc_gpio_mode);
+
+int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+ int alloc_mode, const char *label)
+{
+ const int *p = pin_list;
+ int i;
+ unsigned gpio;
+ unsigned mode;
+
+ for (i = 0; i < count; i++) {
+ gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
+ mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK);
+
+ if (gpio >= (GPIO_PORT_MAX + 1) * 32)
+ goto setup_error;
+
+ if (alloc_mode & MXC_GPIO_ALLOC_MODE_RELEASE)
+ gpio_free(gpio);
+ else if (!(alloc_mode & MXC_GPIO_ALLOC_MODE_NO_ALLOC))
+ if (gpio_request(gpio, label)
+ && !(alloc_mode & MXC_GPIO_ALLOC_MODE_TRY_ALLOC))
+ goto setup_error;
+
+ if (!(alloc_mode & (MXC_GPIO_ALLOC_MODE_ALLOC_ONLY |
+ MXC_GPIO_ALLOC_MODE_RELEASE)))
+ mxc_gpio_mode(gpio | mode);
+
+ p++;
+ }
+ return 0;
+
+setup_error:
+ if (alloc_mode & (MXC_GPIO_ALLOC_MODE_NO_ALLOC |
+ MXC_GPIO_ALLOC_MODE_TRY_ALLOC))
+ return -EINVAL;
+
+ while (p != pin_list) {
+ p--;
+ gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
+ gpio_free(gpio);
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
+
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 2ad5a6917b3f..1fbe01da6925 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -1,24 +1,59 @@
/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
*/
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <asm/hardware.h>
+#include <linux/irq.h>
#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
#include <asm/arch/common.h>
+#define AVIC_BASE IO_ADDRESS(AVIC_BASE_ADDR)
+#define AVIC_INTCNTL (AVIC_BASE + 0x00) /* int control reg */
+#define AVIC_NIMASK (AVIC_BASE + 0x04) /* int mask reg */
+#define AVIC_INTENNUM (AVIC_BASE + 0x08) /* int enable number reg */
+#define AVIC_INTDISNUM (AVIC_BASE + 0x0C) /* int disable number reg */
+#define AVIC_INTENABLEH (AVIC_BASE + 0x10) /* int enable reg high */
+#define AVIC_INTENABLEL (AVIC_BASE + 0x14) /* int enable reg low */
+#define AVIC_INTTYPEH (AVIC_BASE + 0x18) /* int type reg high */
+#define AVIC_INTTYPEL (AVIC_BASE + 0x1C) /* int type reg low */
+#define AVIC_NIPRIORITY7 (AVIC_BASE + 0x20) /* norm int priority lvl7 */
+#define AVIC_NIPRIORITY6 (AVIC_BASE + 0x24) /* norm int priority lvl6 */
+#define AVIC_NIPRIORITY5 (AVIC_BASE + 0x28) /* norm int priority lvl5 */
+#define AVIC_NIPRIORITY4 (AVIC_BASE + 0x2C) /* norm int priority lvl4 */
+#define AVIC_NIPRIORITY3 (AVIC_BASE + 0x30) /* norm int priority lvl3 */
+#define AVIC_NIPRIORITY2 (AVIC_BASE + 0x34) /* norm int priority lvl2 */
+#define AVIC_NIPRIORITY1 (AVIC_BASE + 0x38) /* norm int priority lvl1 */
+#define AVIC_NIPRIORITY0 (AVIC_BASE + 0x3C) /* norm int priority lvl0 */
+#define AVIC_NIVECSR (AVIC_BASE + 0x40) /* norm int vector/status */
+#define AVIC_FIVECSR (AVIC_BASE + 0x44) /* fast int vector/status */
+#define AVIC_INTSRCH (AVIC_BASE + 0x48) /* int source reg high */
+#define AVIC_INTSRCL (AVIC_BASE + 0x4C) /* int source reg low */
+#define AVIC_INTFRCH (AVIC_BASE + 0x50) /* int force reg high */
+#define AVIC_INTFRCL (AVIC_BASE + 0x54) /* int force reg low */
+#define AVIC_NIPNDH (AVIC_BASE + 0x58) /* norm int pending high */
+#define AVIC_NIPNDL (AVIC_BASE + 0x5C) /* norm int pending low */
+#define AVIC_FIPNDH (AVIC_BASE + 0x60) /* fast int pending high */
+#define AVIC_FIPNDL (AVIC_BASE + 0x64) /* fast int pending low */
+
+#define SYSTEM_PREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x20)
+#define SYSTEM_SREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x24)
+#define IIM_PROD_REV_SH 3
+#define IIM_PROD_REV_LEN 5
+
/* Disable interrupt number "irq" in the AVIC */
static void mxc_mask_irq(unsigned int irq)
{
@@ -32,7 +67,7 @@ static void mxc_unmask_irq(unsigned int irq)
}
static struct irq_chip mxc_avic_chip = {
- .mask_ack = mxc_mask_irq,
+ .ack = mxc_mask_irq,
.mask = mxc_mask_irq,
.unmask = mxc_unmask_irq,
};
@@ -71,5 +106,8 @@ void __init mxc_init_irq(void)
reg |= (0xF << 28);
__raw_writel(reg, AVIC_NIPRIORITY6);
+ /* init architectures chained interrupt handler */
+ mxc_register_gpios();
+
printk(KERN_INFO "MXC IRQ initialized\n");
}
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
new file mode 100644
index 000000000000..3bf86343fdf4
--- /dev/null
+++ b/arch/arm/plat-mxc/time.c
@@ -0,0 +1,228 @@
+/*
+ * linux/arch/arm/plat-mxc/time.c
+ *
+ * Copyright (C) 2000-2001 Deep Blue Solutions
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+
+#include <asm/hardware.h>
+#include <asm/mach/time.h>
+#include <asm/arch/common.h>
+#include <asm/arch/mxc_timer.h>
+
+static struct clock_event_device clockevent_mxc;
+static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
+
+/* clock source for the timer */
+static struct clk *timer_clk;
+
+/* clock source */
+
+static cycle_t mxc_get_cycles(void)
+{
+ return __raw_readl(TIMER_BASE + MXC_TCN);
+}
+
+static struct clocksource clocksource_mxc = {
+ .name = "mxc_timer1",
+ .rating = 200,
+ .read = mxc_get_cycles,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 20,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init mxc_clocksource_init(void)
+{
+ unsigned int clock;
+
+ clock = clk_get_rate(timer_clk);
+
+ clocksource_mxc.mult = clocksource_hz2mult(clock,
+ clocksource_mxc.shift);
+ clocksource_register(&clocksource_mxc);
+
+ return 0;
+}
+
+/* clock event */
+
+static int mxc_set_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ unsigned long tcmp;
+
+ tcmp = __raw_readl(TIMER_BASE + MXC_TCN) + evt;
+ __raw_writel(tcmp, TIMER_BASE + MXC_TCMP);
+
+ return (int)(tcmp - __raw_readl(TIMER_BASE + MXC_TCN)) < 0 ?
+ -ETIME : 0;
+}
+
+#ifdef DEBUG
+static const char *clock_event_mode_label[] = {
+ [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
+ [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT",
+ [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
+ [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED"
+};
+#endif /* DEBUG */
+
+static void mxc_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ unsigned long flags;
+
+ /*
+ * The timer interrupt generation is disabled at least
+ * for enough time to call mxc_set_next_event()
+ */
+ local_irq_save(flags);
+
+ /* Disable interrupt in GPT module */
+ gpt_irq_disable();
+
+ if (mode != clockevent_mode) {
+ /* Set event time into far-far future */
+ __raw_writel(__raw_readl(TIMER_BASE + MXC_TCN) - 3,
+ TIMER_BASE + MXC_TCMP);
+ /* Clear pending interrupt */
+ gpt_irq_acknowledge();
+ }
+
+#ifdef DEBUG
+ printk(KERN_INFO "mxc_set_mode: changing mode from %s to %s\n",
+ clock_event_mode_label[clockevent_mode],
+ clock_event_mode_label[mode]);
+#endif /* DEBUG */
+
+ /* Remember timer mode */
+ clockevent_mode = mode;
+ local_irq_restore(flags);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ printk(KERN_ERR"mxc_set_mode: Periodic mode is not "
+ "supported for i.MX\n");
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /*
+ * Do not put overhead of interrupt enable/disable into
+ * mxc_set_next_event(), the core has about 4 minutes
+ * to call mxc_set_next_event() or shutdown clock after
+ * mode switching
+ */
+ local_irq_save(flags);
+ gpt_irq_enable();
+ local_irq_restore(flags);
+ break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_RESUME:
+ /* Left event sources disabled, no more interrupts appear */
+ break;
+ }
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &clockevent_mxc;
+ uint32_t tstat;
+
+ tstat = __raw_readl(TIMER_BASE + MXC_TSTAT);
+
+ gpt_irq_acknowledge();
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction mxc_timer_irq = {
+ .name = "i.MX Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = mxc_timer_interrupt,
+};
+
+static struct clock_event_device clockevent_mxc = {
+ .name = "mxc_timer1",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .set_mode = mxc_set_mode,
+ .set_next_event = mxc_set_next_event,
+ .rating = 200,
+};
+
+static int __init mxc_clockevent_init(void)
+{
+ unsigned int clock;
+
+ clock = clk_get_rate(timer_clk);
+
+ clockevent_mxc.mult = div_sc(clock, NSEC_PER_SEC,
+ clockevent_mxc.shift);
+ clockevent_mxc.max_delta_ns =
+ clockevent_delta2ns(0xfffffffe, &clockevent_mxc);
+ clockevent_mxc.min_delta_ns =
+ clockevent_delta2ns(0xff, &clockevent_mxc);
+
+ clockevent_mxc.cpumask = cpumask_of_cpu(0);
+
+ clockevents_register_device(&clockevent_mxc);
+
+ return 0;
+}
+
+void __init mxc_timer_init(const char *clk_timer)
+{
+ timer_clk = clk_get(NULL, clk_timer);
+ if (!timer_clk) {
+ printk(KERN_ERR"Cannot determine timer clock. Giving up.\n");
+ return;
+ }
+
+ clk_enable(timer_clk);
+
+ /*
+ * Initialise to a known state (all timers off, and timing reset)
+ */
+ __raw_writel(0, TIMER_BASE + MXC_TCTL);
+ __raw_writel(0, TIMER_BASE + MXC_TPRER); /* see datasheet note */
+
+ __raw_writel(TCTL_FRR | /* free running */
+ TCTL_VAL | /* set clocksource and arch specific bits */
+ TCTL_TEN, /* start the timer */
+ TIMER_BASE + MXC_TCTL);
+
+ /* init and register the timer to the framework */
+ mxc_clocksource_init();
+ mxc_clockevent_init();
+
+ /* Make irqs happen */
+ setup_irq(TIMER_INTERRUPT, &mxc_timer_irq);
+}
+
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index bc639a30d6d1..2c4051cc79a1 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -3,7 +3,7 @@
#
# Common support
-obj-y := common.o sram.o sram-fn.o clock.o devices.o dma.o mux.o gpio.o \
+obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \
usb.o fb.o
obj-m :=
obj-n :=
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 2db5580048d8..c2e741de0203 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -1,7 +1,7 @@
/*
* linux/arch/arm/plat-omap/clock.c
*
- * Copyright (C) 2004 - 2005 Nokia corporation
+ * Copyright (C) 2004 - 2008 Nokia corporation
* Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
*
* Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
@@ -22,6 +22,7 @@
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/cpufreq.h>
+#include <linux/debugfs.h>
#include <asm/io.h>
@@ -33,41 +34,6 @@ static DEFINE_SPINLOCK(clockfw_lock);
static struct clk_functions *arch_clock;
-#ifdef CONFIG_PM_DEBUG
-
-static void print_parents(struct clk *clk)
-{
- struct clk *p;
- int printed = 0;
-
- list_for_each_entry(p, &clocks, node) {
- if (p->parent == clk && p->usecount) {
- if (!clk->usecount && !printed) {
- printk("MISMATCH: %s\n", clk->name);
- printed = 1;
- }
- printk("\t%-15s\n", p->name);
- }
- }
-}
-
-void clk_print_usecounts(void)
-{
- unsigned long flags;
- struct clk *p;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- list_for_each_entry(p, &clocks, node) {
- if (p->usecount)
- printk("%-15s: %d\n", p->name, p->usecount);
- print_parents(p);
-
- }
- spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-
-#endif
-
/*-------------------------------------------------------------------------
* Standard clock functions defined in include/linux/clk.h
*-------------------------------------------------------------------------*/
@@ -446,3 +412,93 @@ int __init clk_init(struct clk_functions * custom_clocks)
return 0;
}
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+/*
+ * debugfs support to trace clock tree hierarchy and attributes
+ */
+static struct dentry *clk_debugfs_root;
+
+static int clk_debugfs_register_one(struct clk *c)
+{
+ int err;
+ struct dentry *d, *child;
+ struct clk *pa = c->parent;
+ char s[255];
+ char *p = s;
+
+ p += sprintf(p, "%s", c->name);
+ if (c->id != 0)
+ sprintf(p, ":%d", c->id);
+ d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root);
+ if (IS_ERR(d))
+ return PTR_ERR(d);
+ c->dent = d;
+
+ d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
+ if (IS_ERR(d)) {
+ err = PTR_ERR(d);
+ goto err_out;
+ }
+ d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+ if (IS_ERR(d)) {
+ err = PTR_ERR(d);
+ goto err_out;
+ }
+ d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+ if (IS_ERR(d)) {
+ err = PTR_ERR(d);
+ goto err_out;
+ }
+ return 0;
+
+err_out:
+ d = c->dent;
+ list_for_each_entry(child, &d->d_subdirs, d_u.d_child)
+ debugfs_remove(child);
+ debugfs_remove(c->dent);
+ return err;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+ int err;
+ struct clk *pa = c->parent;
+
+ if (pa && !pa->dent) {
+ err = clk_debugfs_register(pa);
+ if (err)
+ return err;
+ }
+
+ if (!c->dent) {
+ err = clk_debugfs_register_one(c);
+ if (err)
+ return err;
+ }
+ return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+ struct clk *c;
+ struct dentry *d;
+ int err;
+
+ d = debugfs_create_dir("clock", NULL);
+ if (IS_ERR(d))
+ return PTR_ERR(d);
+ clk_debugfs_root = d;
+
+ list_for_each_entry(c, &clocks, node) {
+ err = clk_debugfs_register(c);
+ if (err)
+ goto err_out;
+ }
+ return 0;
+err_out:
+ debugfs_remove(clk_debugfs_root); /* REVISIT: Cleanup correctly */
+ return err;
+}
+late_initcall(clk_debugfs_init);
+
+#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index bd1cef2c3c14..8d04929a3c75 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -26,6 +26,7 @@
#include <asm/io.h>
#include <asm/setup.h>
+#include <asm/arch/common.h>
#include <asm/arch/board.h>
#include <asm/arch/control.h>
#include <asm/arch/mux.h>
@@ -241,30 +242,70 @@ arch_initcall(omap_init_clocksource_32k);
/* Global address base setup code */
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+
+static struct omap_globals *omap2_globals;
+
+static void __init __omap2_set_globals(void)
+{
+ omap2_set_globals_memory(omap2_globals);
+ omap2_set_globals_control(omap2_globals);
+ omap2_set_globals_prcm(omap2_globals);
+}
+
+#endif
+
#if defined(CONFIG_ARCH_OMAP2420)
+
+static struct omap_globals omap242x_globals = {
+ .tap = (__force void __iomem *)OMAP2_IO_ADDRESS(0x48014000),
+ .sdrc = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE),
+ .sms = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE),
+ .ctrl = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE),
+ .prm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE),
+ .cm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_CM_BASE),
+};
+
void __init omap2_set_globals_242x(void)
{
- omap2_sdrc_base = OMAP2420_SDRC_BASE;
- omap2_sms_base = OMAP2420_SMS_BASE;
- omap_ctrl_base_set(OMAP2420_CTRL_BASE);
+ omap2_globals = &omap242x_globals;
+ __omap2_set_globals();
}
#endif
#if defined(CONFIG_ARCH_OMAP2430)
+
+static struct omap_globals omap243x_globals = {
+ .tap = (__force void __iomem *)OMAP2_IO_ADDRESS(0x4900a000),
+ .sdrc = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE),
+ .sms = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE),
+ .ctrl = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE),
+ .prm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE),
+ .cm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2430_CM_BASE),
+};
+
void __init omap2_set_globals_243x(void)
{
- omap2_sdrc_base = OMAP243X_SDRC_BASE;
- omap2_sms_base = OMAP243X_SMS_BASE;
- omap_ctrl_base_set(OMAP243X_CTRL_BASE);
+ omap2_globals = &omap243x_globals;
+ __omap2_set_globals();
}
#endif
#if defined(CONFIG_ARCH_OMAP3430)
+
+static struct omap_globals omap343x_globals = {
+ .tap = (__force void __iomem *)OMAP2_IO_ADDRESS(0x4830A000),
+ .sdrc = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE),
+ .sms = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE),
+ .ctrl = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE),
+ .prm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE),
+ .cm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP3430_CM_BASE),
+};
+
void __init omap2_set_globals_343x(void)
{
- omap2_sdrc_base = OMAP343X_SDRC_BASE;
- omap2_sms_base = OMAP343X_SMS_BASE;
- omap_ctrl_base_set(OMAP343X_CTRL_BASE);
+ omap2_globals = &omap343x_globals;
+ __omap2_set_globals();
}
#endif
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 4a53f9ba6c43..81002b722da1 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -24,6 +24,7 @@
#include <asm/arch/mux.h>
#include <asm/arch/gpio.h>
#include <asm/arch/menelaus.h>
+#include <asm/arch/mcbsp.h>
#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
@@ -145,6 +146,53 @@ static inline void omap_init_kp(void) {}
#endif
/*-------------------------------------------------------------------------*/
+#if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE)
+
+static struct platform_device **omap_mcbsp_devices;
+
+void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
+ int size)
+{
+ int i;
+
+ if (size > OMAP_MAX_MCBSP_COUNT) {
+ printk(KERN_WARNING "Registered too many McBSPs platform_data."
+ " Using maximum (%d) available.\n",
+ OMAP_MAX_MCBSP_COUNT);
+ size = OMAP_MAX_MCBSP_COUNT;
+ }
+
+ omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
+ GFP_KERNEL);
+ if (!omap_mcbsp_devices) {
+ printk(KERN_ERR "Could not register McBSP devices\n");
+ return;
+ }
+
+ for (i = 0; i < size; i++) {
+ struct platform_device *new_mcbsp;
+ int ret;
+
+ new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
+ if (!new_mcbsp)
+ continue;
+ new_mcbsp->dev.platform_data = &config[i];
+ ret = platform_device_add(new_mcbsp);
+ if (ret) {
+ platform_device_put(new_mcbsp);
+ continue;
+ }
+ omap_mcbsp_devices[i] = new_mcbsp;
+ }
+}
+
+#else
+void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
+ int size)
+{ }
+#endif
+
+/*-------------------------------------------------------------------------*/
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 39c637b0ffea..fac8e994f588 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1,7 +1,7 @@
/*
* linux/arch/arm/plat-omap/dma.c
*
- * Copyright (C) 2003 Nokia Corporation
+ * Copyright (C) 2003 - 2008 Nokia Corporation
* Author: Juha Yrjölä <juha.yrjola@nokia.com>
* DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
* Graphics DMA and LCD DMA graphics tranformations
@@ -25,11 +25,11 @@
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/io.h>
#include <asm/system.h>
#include <asm/hardware.h>
#include <asm/dma.h>
-#include <asm/io.h>
#include <asm/arch/tc.h>
@@ -43,13 +43,13 @@ enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED,
enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
#endif
-#define OMAP_DMA_ACTIVE 0x01
-#define OMAP_DMA_CCR_EN (1 << 7)
+#define OMAP_DMA_ACTIVE 0x01
+#define OMAP_DMA_CCR_EN (1 << 7)
#define OMAP2_DMA_CSR_CLEAR_MASK 0xffe
-#define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec)
+#define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec)
-static int enable_1510_mode = 0;
+static int enable_1510_mode;
struct omap_dma_lch {
int next_lch;
@@ -57,7 +57,7 @@ struct omap_dma_lch {
u16 saved_csr;
u16 enabled_irqs;
const char *dev_name;
- void (* callback)(int lch, u16 ch_status, void *data);
+ void (*callback)(int lch, u16 ch_status, void *data);
void *data;
#ifndef CONFIG_ARCH_OMAP1
@@ -72,7 +72,6 @@ struct omap_dma_lch {
long flags;
};
-#ifndef CONFIG_ARCH_OMAP1
struct dma_link_info {
int *linked_dmach_q;
int no_of_lchs_linked;
@@ -86,7 +85,9 @@ struct dma_link_info {
};
-static struct dma_link_info dma_linked_lch[OMAP_LOGICAL_DMA_CH_COUNT];
+static struct dma_link_info *dma_linked_lch;
+
+#ifndef CONFIG_ARCH_OMAP1
/* Chain handling macros */
#define OMAP_DMA_CHAIN_QINIT(chain_id) \
@@ -119,12 +120,15 @@ static struct dma_link_info dma_linked_lch[OMAP_LOGICAL_DMA_CH_COUNT];
dma_linked_lch[chain_id].q_count++; \
} while (0)
#endif
+
+static int dma_lch_count;
static int dma_chan_count;
static spinlock_t dma_chan_lock;
-static struct omap_dma_lch dma_chan[OMAP_LOGICAL_DMA_CH_COUNT];
+static struct omap_dma_lch *dma_chan;
+static void __iomem *omap_dma_base;
-static const u8 omap1_dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = {
+static const u8 omap1_dma_irq[OMAP1_LOGICAL_DMA_CH_COUNT] = {
INT_DMA_CH0_6, INT_DMA_CH1_7, INT_DMA_CH2_8, INT_DMA_CH3,
INT_DMA_CH4, INT_DMA_CH5, INT_1610_DMA_CH6, INT_1610_DMA_CH7,
INT_1610_DMA_CH8, INT_1610_DMA_CH9, INT_1610_DMA_CH10,
@@ -139,6 +143,24 @@ static inline void omap_enable_channel_irq(int lch);
#define REVISIT_24XX() printk(KERN_ERR "FIXME: no %s on 24xx\n", \
__func__);
+#define dma_read(reg) \
+({ \
+ u32 __val; \
+ if (cpu_class_is_omap1()) \
+ __val = __raw_readw(omap_dma_base + OMAP1_DMA_##reg); \
+ else \
+ __val = __raw_readl(omap_dma_base + OMAP_DMA4_##reg); \
+ __val; \
+})
+
+#define dma_write(val, reg) \
+({ \
+ if (cpu_class_is_omap1()) \
+ __raw_writew((u16)(val), omap_dma_base + OMAP1_DMA_##reg); \
+ else \
+ __raw_writel((val), omap_dma_base + OMAP_DMA4_##reg); \
+})
+
#ifdef CONFIG_ARCH_OMAP15XX
/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
int omap_dma_in_1510_mode(void)
@@ -173,13 +195,14 @@ static inline void set_gdma_dev(int req, int dev)
#define set_gdma_dev(req, dev) do {} while (0)
#endif
+/* Omap1 only */
static void clear_lch_regs(int lch)
{
int i;
- u32 lch_base = OMAP_DMA_BASE + lch * 0x40;
+ void __iomem *lch_base = omap_dma_base + OMAP1_DMA_CH_BASE(lch);
for (i = 0; i < 0x2c; i += 2)
- omap_writew(0, lch_base + i);
+ __raw_writew(0, lch_base + i);
}
void omap_set_dma_priority(int lch, int dst_port, int priority)
@@ -212,33 +235,49 @@ void omap_set_dma_priority(int lch, int dst_port, int priority)
}
if (cpu_class_is_omap2()) {
+ u32 ccr;
+
+ ccr = dma_read(CCR(lch));
if (priority)
- OMAP_DMA_CCR_REG(lch) |= (1 << 6);
+ ccr |= (1 << 6);
else
- OMAP_DMA_CCR_REG(lch) &= ~(1 << 6);
+ ccr &= ~(1 << 6);
+ dma_write(ccr, CCR(lch));
}
}
+EXPORT_SYMBOL(omap_set_dma_priority);
void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
int frame_count, int sync_mode,
int dma_trigger, int src_or_dst_synch)
{
- OMAP_DMA_CSDP_REG(lch) &= ~0x03;
- OMAP_DMA_CSDP_REG(lch) |= data_type;
+ u32 l;
+
+ l = dma_read(CSDP(lch));
+ l &= ~0x03;
+ l |= data_type;
+ dma_write(l, CSDP(lch));
if (cpu_class_is_omap1()) {
- OMAP_DMA_CCR_REG(lch) &= ~(1 << 5);
+ u16 ccr;
+
+ ccr = dma_read(CCR(lch));
+ ccr &= ~(1 << 5);
if (sync_mode == OMAP_DMA_SYNC_FRAME)
- OMAP_DMA_CCR_REG(lch) |= 1 << 5;
+ ccr |= 1 << 5;
+ dma_write(ccr, CCR(lch));
- OMAP1_DMA_CCR2_REG(lch) &= ~(1 << 2);
+ ccr = dma_read(CCR2(lch));
+ ccr &= ~(1 << 2);
if (sync_mode == OMAP_DMA_SYNC_BLOCK)
- OMAP1_DMA_CCR2_REG(lch) |= 1 << 2;
+ ccr |= 1 << 2;
+ dma_write(ccr, CCR2(lch));
}
if (cpu_class_is_omap2() && dma_trigger) {
- u32 val = OMAP_DMA_CCR_REG(lch);
+ u32 val;
+ val = dma_read(CCR(lch));
val &= ~(3 << 19);
if (dma_trigger > 63)
val |= 1 << 20;
@@ -263,12 +302,13 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
else
val &= ~(1 << 24); /* dest synch */
- OMAP_DMA_CCR_REG(lch) = val;
+ dma_write(val, CCR(lch));
}
- OMAP_DMA_CEN_REG(lch) = elem_count;
- OMAP_DMA_CFN_REG(lch) = frame_count;
+ dma_write(elem_count, CEN(lch));
+ dma_write(frame_count, CFN(lch));
}
+EXPORT_SYMBOL(omap_set_dma_transfer_params);
void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
{
@@ -281,7 +321,9 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
return;
}
- w = OMAP1_DMA_CCR2_REG(lch) & ~0x03;
+ w = dma_read(CCR2(lch));
+ w &= ~0x03;
+
switch (mode) {
case OMAP_DMA_CONSTANT_FILL:
w |= 0x01;
@@ -294,52 +336,81 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
default:
BUG();
}
- OMAP1_DMA_CCR2_REG(lch) = w;
+ dma_write(w, CCR2(lch));
- w = OMAP1_DMA_LCH_CTRL_REG(lch) & ~0x0f;
+ w = dma_read(LCH_CTRL(lch));
+ w &= ~0x0f;
/* Default is channel type 2D */
if (mode) {
- OMAP1_DMA_COLOR_L_REG(lch) = (u16)color;
- OMAP1_DMA_COLOR_U_REG(lch) = (u16)(color >> 16);
+ dma_write((u16)color, COLOR_L(lch));
+ dma_write((u16)(color >> 16), COLOR_U(lch));
w |= 1; /* Channel type G */
}
- OMAP1_DMA_LCH_CTRL_REG(lch) = w;
+ dma_write(w, LCH_CTRL(lch));
}
+EXPORT_SYMBOL(omap_set_dma_color_mode);
void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
{
if (cpu_class_is_omap2()) {
- OMAP_DMA_CSDP_REG(lch) &= ~(0x3 << 16);
- OMAP_DMA_CSDP_REG(lch) |= (mode << 16);
+ u32 csdp;
+
+ csdp = dma_read(CSDP(lch));
+ csdp &= ~(0x3 << 16);
+ csdp |= (mode << 16);
+ dma_write(csdp, CSDP(lch));
+ }
+}
+EXPORT_SYMBOL(omap_set_dma_write_mode);
+
+void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
+{
+ if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
+ u32 l;
+
+ l = dma_read(LCH_CTRL(lch));
+ l &= ~0x7;
+ l |= mode;
+ dma_write(l, LCH_CTRL(lch));
}
}
+EXPORT_SYMBOL(omap_set_dma_channel_mode);
/* Note that src_port is only for omap1 */
void omap_set_dma_src_params(int lch, int src_port, int src_amode,
unsigned long src_start,
int src_ei, int src_fi)
{
+ u32 l;
+
if (cpu_class_is_omap1()) {
- OMAP_DMA_CSDP_REG(lch) &= ~(0x1f << 2);
- OMAP_DMA_CSDP_REG(lch) |= src_port << 2;
+ u16 w;
+
+ w = dma_read(CSDP(lch));
+ w &= ~(0x1f << 2);
+ w |= src_port << 2;
+ dma_write(w, CSDP(lch));
}
- OMAP_DMA_CCR_REG(lch) &= ~(0x03 << 12);
- OMAP_DMA_CCR_REG(lch) |= src_amode << 12;
+ l = dma_read(CCR(lch));
+ l &= ~(0x03 << 12);
+ l |= src_amode << 12;
+ dma_write(l, CCR(lch));
if (cpu_class_is_omap1()) {
- OMAP1_DMA_CSSA_U_REG(lch) = src_start >> 16;
- OMAP1_DMA_CSSA_L_REG(lch) = src_start;
+ dma_write(src_start >> 16, CSSA_U(lch));
+ dma_write((u16)src_start, CSSA_L(lch));
}
if (cpu_class_is_omap2())
- OMAP2_DMA_CSSA_REG(lch) = src_start;
+ dma_write(src_start, CSSA(lch));
- OMAP_DMA_CSEI_REG(lch) = src_ei;
- OMAP_DMA_CSFI_REG(lch) = src_fi;
+ dma_write(src_ei, CSEI(lch));
+ dma_write(src_fi, CSFI(lch));
}
+EXPORT_SYMBOL(omap_set_dma_src_params);
-void omap_set_dma_params(int lch, struct omap_dma_channel_params * params)
+void omap_set_dma_params(int lch, struct omap_dma_channel_params *params)
{
omap_set_dma_transfer_params(lch, params->data_type,
params->elem_count, params->frame_count,
@@ -356,28 +427,37 @@ void omap_set_dma_params(int lch, struct omap_dma_channel_params * params)
omap_dma_set_prio_lch(lch, params->read_prio,
params->write_prio);
}
+EXPORT_SYMBOL(omap_set_dma_params);
void omap_set_dma_src_index(int lch, int eidx, int fidx)
{
- if (cpu_class_is_omap2()) {
- REVISIT_24XX();
+ if (cpu_class_is_omap2())
return;
- }
- OMAP_DMA_CSEI_REG(lch) = eidx;
- OMAP_DMA_CSFI_REG(lch) = fidx;
+
+ dma_write(eidx, CSEI(lch));
+ dma_write(fidx, CSFI(lch));
}
+EXPORT_SYMBOL(omap_set_dma_src_index);
void omap_set_dma_src_data_pack(int lch, int enable)
{
- OMAP_DMA_CSDP_REG(lch) &= ~(1 << 6);
+ u32 l;
+
+ l = dma_read(CSDP(lch));
+ l &= ~(1 << 6);
if (enable)
- OMAP_DMA_CSDP_REG(lch) |= (1 << 6);
+ l |= (1 << 6);
+ dma_write(l, CSDP(lch));
}
+EXPORT_SYMBOL(omap_set_dma_src_data_pack);
void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
{
unsigned int burst = 0;
- OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 7);
+ u32 l;
+
+ l = dma_read(CSDP(lch));
+ l &= ~(0x03 << 7);
switch (burst_mode) {
case OMAP_DMA_DATA_BURST_DIS:
@@ -408,55 +488,73 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
default:
BUG();
}
- OMAP_DMA_CSDP_REG(lch) |= (burst << 7);
+
+ l |= (burst << 7);
+ dma_write(l, CSDP(lch));
}
+EXPORT_SYMBOL(omap_set_dma_src_burst_mode);
/* Note that dest_port is only for OMAP1 */
void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
unsigned long dest_start,
int dst_ei, int dst_fi)
{
+ u32 l;
+
if (cpu_class_is_omap1()) {
- OMAP_DMA_CSDP_REG(lch) &= ~(0x1f << 9);
- OMAP_DMA_CSDP_REG(lch) |= dest_port << 9;
+ l = dma_read(CSDP(lch));
+ l &= ~(0x1f << 9);
+ l |= dest_port << 9;
+ dma_write(l, CSDP(lch));
}
- OMAP_DMA_CCR_REG(lch) &= ~(0x03 << 14);
- OMAP_DMA_CCR_REG(lch) |= dest_amode << 14;
+ l = dma_read(CCR(lch));
+ l &= ~(0x03 << 14);
+ l |= dest_amode << 14;
+ dma_write(l, CCR(lch));
if (cpu_class_is_omap1()) {
- OMAP1_DMA_CDSA_U_REG(lch) = dest_start >> 16;
- OMAP1_DMA_CDSA_L_REG(lch) = dest_start;
+ dma_write(dest_start >> 16, CDSA_U(lch));
+ dma_write(dest_start, CDSA_L(lch));
}
if (cpu_class_is_omap2())
- OMAP2_DMA_CDSA_REG(lch) = dest_start;
+ dma_write(dest_start, CDSA(lch));
- OMAP_DMA_CDEI_REG(lch) = dst_ei;
- OMAP_DMA_CDFI_REG(lch) = dst_fi;
+ dma_write(dst_ei, CDEI(lch));
+ dma_write(dst_fi, CDFI(lch));
}
+EXPORT_SYMBOL(omap_set_dma_dest_params);
void omap_set_dma_dest_index(int lch, int eidx, int fidx)
{
- if (cpu_class_is_omap2()) {
- REVISIT_24XX();
+ if (cpu_class_is_omap2())
return;
- }
- OMAP_DMA_CDEI_REG(lch) = eidx;
- OMAP_DMA_CDFI_REG(lch) = fidx;
+
+ dma_write(eidx, CDEI(lch));
+ dma_write(fidx, CDFI(lch));
}
+EXPORT_SYMBOL(omap_set_dma_dest_index);
void omap_set_dma_dest_data_pack(int lch, int enable)
{
- OMAP_DMA_CSDP_REG(lch) &= ~(1 << 13);
+ u32 l;
+
+ l = dma_read(CSDP(lch));
+ l &= ~(1 << 13);
if (enable)
- OMAP_DMA_CSDP_REG(lch) |= 1 << 13;
+ l |= 1 << 13;
+ dma_write(l, CSDP(lch));
}
+EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
{
unsigned int burst = 0;
- OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 14);
+ u32 l;
+
+ l = dma_read(CSDP(lch));
+ l &= ~(0x03 << 14);
switch (burst_mode) {
case OMAP_DMA_DATA_BURST_DIS:
@@ -486,8 +584,10 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
BUG();
return;
}
- OMAP_DMA_CSDP_REG(lch) |= (burst << 14);
+ l |= (burst << 14);
+ dma_write(l, CSDP(lch));
}
+EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
static inline void omap_enable_channel_irq(int lch)
{
@@ -495,62 +595,74 @@ static inline void omap_enable_channel_irq(int lch)
/* Clear CSR */
if (cpu_class_is_omap1())
- status = OMAP_DMA_CSR_REG(lch);
+ status = dma_read(CSR(lch));
else if (cpu_class_is_omap2())
- OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
+ dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
/* Enable some nice interrupts. */
- OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs;
+ dma_write(dma_chan[lch].enabled_irqs, CICR(lch));
}
static void omap_disable_channel_irq(int lch)
{
if (cpu_class_is_omap2())
- OMAP_DMA_CICR_REG(lch) = 0;
+ dma_write(0, CICR(lch));
}
void omap_enable_dma_irq(int lch, u16 bits)
{
dma_chan[lch].enabled_irqs |= bits;
}
+EXPORT_SYMBOL(omap_enable_dma_irq);
void omap_disable_dma_irq(int lch, u16 bits)
{
dma_chan[lch].enabled_irqs &= ~bits;
}
+EXPORT_SYMBOL(omap_disable_dma_irq);
static inline void enable_lnk(int lch)
{
+ u32 l;
+
+ l = dma_read(CLNK_CTRL(lch));
+
if (cpu_class_is_omap1())
- OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 14);
+ l &= ~(1 << 14);
/* Set the ENABLE_LNK bits */
if (dma_chan[lch].next_lch != -1)
- OMAP_DMA_CLNK_CTRL_REG(lch) =
- dma_chan[lch].next_lch | (1 << 15);
+ l = dma_chan[lch].next_lch | (1 << 15);
#ifndef CONFIG_ARCH_OMAP1
- if (dma_chan[lch].next_linked_ch != -1)
- OMAP_DMA_CLNK_CTRL_REG(lch) =
- dma_chan[lch].next_linked_ch | (1 << 15);
+ if (cpu_class_is_omap2())
+ if (dma_chan[lch].next_linked_ch != -1)
+ l = dma_chan[lch].next_linked_ch | (1 << 15);
#endif
+
+ dma_write(l, CLNK_CTRL(lch));
}
static inline void disable_lnk(int lch)
{
+ u32 l;
+
+ l = dma_read(CLNK_CTRL(lch));
+
/* Disable interrupts */
if (cpu_class_is_omap1()) {
- OMAP_DMA_CICR_REG(lch) = 0;
+ dma_write(0, CICR(lch));
/* Set the STOP_LNK bit */
- OMAP_DMA_CLNK_CTRL_REG(lch) |= 1 << 14;
+ l |= 1 << 14;
}
if (cpu_class_is_omap2()) {
omap_disable_channel_irq(lch);
/* Clear the ENABLE_LNK bit */
- OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 15);
+ l &= ~(1 << 15);
}
+ dma_write(l, CLNK_CTRL(lch));
dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
}
@@ -561,13 +673,13 @@ static inline void omap2_enable_irq_lch(int lch)
if (!cpu_class_is_omap2())
return;
- val = omap_readl(OMAP_DMA4_IRQENABLE_L0);
+ val = dma_read(IRQENABLE_L0);
val |= 1 << lch;
- omap_writel(val, OMAP_DMA4_IRQENABLE_L0);
+ dma_write(val, IRQENABLE_L0);
}
int omap_request_dma(int dev_id, const char *dev_name,
- void (* callback)(int lch, u16 ch_status, void *data),
+ void (*callback)(int lch, u16 ch_status, void *data),
void *data, int *dma_ch_out)
{
int ch, free_ch = -1;
@@ -600,10 +712,14 @@ int omap_request_dma(int dev_id, const char *dev_name,
chan->dev_name = dev_name;
chan->callback = callback;
chan->data = data;
+
#ifndef CONFIG_ARCH_OMAP1
- chan->chain_id = -1;
- chan->next_linked_ch = -1;
+ if (cpu_class_is_omap2()) {
+ chan->chain_id = -1;
+ chan->next_linked_ch = -1;
+ }
#endif
+
chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
if (cpu_class_is_omap1())
@@ -618,26 +734,28 @@ int omap_request_dma(int dev_id, const char *dev_name,
set_gdma_dev(free_ch + 1, dev_id);
dev_id = free_ch + 1;
}
- /* Disable the 1510 compatibility mode and set the sync device
- * id. */
- OMAP_DMA_CCR_REG(free_ch) = dev_id | (1 << 10);
+ /*
+ * Disable the 1510 compatibility mode and set the sync device
+ * id.
+ */
+ dma_write(dev_id | (1 << 10), CCR(free_ch));
} else if (cpu_is_omap730() || cpu_is_omap15xx()) {
- OMAP_DMA_CCR_REG(free_ch) = dev_id;
+ dma_write(dev_id, CCR(free_ch));
}
if (cpu_class_is_omap2()) {
omap2_enable_irq_lch(free_ch);
-
omap_enable_channel_irq(free_ch);
/* Clear the CSR register and IRQ status register */
- OMAP_DMA_CSR_REG(free_ch) = OMAP2_DMA_CSR_CLEAR_MASK;
- omap_writel(1 << free_ch, OMAP_DMA4_IRQSTATUS_L0);
+ dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(free_ch));
+ dma_write(1 << free_ch, IRQSTATUS_L0);
}
*dma_ch_out = free_ch;
return 0;
}
+EXPORT_SYMBOL(omap_request_dma);
void omap_free_dma(int lch)
{
@@ -645,11 +763,12 @@ void omap_free_dma(int lch)
spin_lock_irqsave(&dma_chan_lock, flags);
if (dma_chan[lch].dev_id == -1) {
- printk("omap_dma: trying to free nonallocated DMA channel %d\n",
+ pr_err("omap_dma: trying to free unallocated DMA channel %d\n",
lch);
spin_unlock_irqrestore(&dma_chan_lock, flags);
return;
}
+
dma_chan[lch].dev_id = -1;
dma_chan[lch].next_lch = -1;
dma_chan[lch].callback = NULL;
@@ -657,30 +776,31 @@ void omap_free_dma(int lch)
if (cpu_class_is_omap1()) {
/* Disable all DMA interrupts for the channel. */
- OMAP_DMA_CICR_REG(lch) = 0;
+ dma_write(0, CICR(lch));
/* Make sure the DMA transfer is stopped. */
- OMAP_DMA_CCR_REG(lch) = 0;
+ dma_write(0, CCR(lch));
}
if (cpu_class_is_omap2()) {
u32 val;
/* Disable interrupts */
- val = omap_readl(OMAP_DMA4_IRQENABLE_L0);
+ val = dma_read(IRQENABLE_L0);
val &= ~(1 << lch);
- omap_writel(val, OMAP_DMA4_IRQENABLE_L0);
+ dma_write(val, IRQENABLE_L0);
/* Clear the CSR register and IRQ status register */
- OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
- omap_writel(1 << lch, OMAP_DMA4_IRQSTATUS_L0);
+ dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
+ dma_write(1 << lch, IRQSTATUS_L0);
/* Disable all DMA interrupts for the channel. */
- OMAP_DMA_CICR_REG(lch) = 0;
+ dma_write(0, CICR(lch));
/* Make sure the DMA transfer is stopped. */
- OMAP_DMA_CCR_REG(lch) = 0;
+ dma_write(0, CCR(lch));
omap_clear_dma(lch);
}
}
+EXPORT_SYMBOL(omap_free_dma);
/**
* @brief omap_dma_set_global_params : Set global priority settings for dma
@@ -708,7 +828,7 @@ omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
reg = (arb_rate & 0xff) << 16;
reg |= (0xff & max_fifo_depth);
- omap_writel(reg, OMAP_DMA4_GCR_REG);
+ dma_write(reg, GCR);
}
EXPORT_SYMBOL(omap_dma_set_global_params);
@@ -725,20 +845,21 @@ int
omap_dma_set_prio_lch(int lch, unsigned char read_prio,
unsigned char write_prio)
{
- u32 w;
+ u32 l;
- if (unlikely((lch < 0 || lch >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+ if (unlikely((lch < 0 || lch >= dma_lch_count))) {
printk(KERN_ERR "Invalid channel id\n");
return -EINVAL;
}
- w = OMAP_DMA_CCR_REG(lch);
- w &= ~((1 << 6) | (1 << 26));
+ l = dma_read(CCR(lch));
+ l &= ~((1 << 6) | (1 << 26));
if (cpu_is_omap2430() || cpu_is_omap34xx())
- w |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
+ l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
else
- w |= ((read_prio & 0x1) << 6);
+ l |= ((read_prio & 0x1) << 6);
+
+ dma_write(l, CCR(lch));
- OMAP_DMA_CCR_REG(lch) = w;
return 0;
}
EXPORT_SYMBOL(omap_dma_set_prio_lch);
@@ -754,28 +875,34 @@ void omap_clear_dma(int lch)
local_irq_save(flags);
if (cpu_class_is_omap1()) {
- int status;
- OMAP_DMA_CCR_REG(lch) &= ~OMAP_DMA_CCR_EN;
+ u32 l;
+
+ l = dma_read(CCR(lch));
+ l &= ~OMAP_DMA_CCR_EN;
+ dma_write(l, CCR(lch));
/* Clear pending interrupts */
- status = OMAP_DMA_CSR_REG(lch);
+ l = dma_read(CSR(lch));
}
if (cpu_class_is_omap2()) {
int i;
- u32 lch_base = OMAP_DMA4_BASE + lch * 0x60 + 0x80;
+ void __iomem *lch_base = omap_dma_base + OMAP_DMA4_CH_BASE(lch);
for (i = 0; i < 0x44; i += 4)
- omap_writel(0, lch_base + i);
+ __raw_writel(0, lch_base + i);
}
local_irq_restore(flags);
}
+EXPORT_SYMBOL(omap_clear_dma);
void omap_start_dma(int lch)
{
+ u32 l;
+
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch;
- char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT];
+ char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
dma_chan_link_map[lch] = 1;
/* Set the link register of the first channel */
@@ -799,27 +926,34 @@ void omap_start_dma(int lch)
} while (next_lch != -1);
} else if (cpu_class_is_omap2()) {
/* Errata: Need to write lch even if not using chaining */
- OMAP_DMA_CLNK_CTRL_REG(lch) = lch;
+ dma_write(lch, CLNK_CTRL(lch));
}
omap_enable_channel_irq(lch);
- /* Errata: On ES2.0 BUFFERING disable must be set.
- * This will always fail on ES1.0 */
- if (cpu_is_omap24xx()) {
- OMAP_DMA_CCR_REG(lch) |= OMAP_DMA_CCR_EN;
- }
+ l = dma_read(CCR(lch));
+
+ /*
+ * Errata: On ES2.0 BUFFERING disable must be set.
+ * This will always fail on ES1.0
+ */
+ if (cpu_is_omap24xx())
+ l |= OMAP_DMA_CCR_EN;
- OMAP_DMA_CCR_REG(lch) |= OMAP_DMA_CCR_EN;
+ l |= OMAP_DMA_CCR_EN;
+ dma_write(l, CCR(lch));
dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
}
+EXPORT_SYMBOL(omap_start_dma);
void omap_stop_dma(int lch)
{
+ u32 l;
+
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch = lch;
- char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT];
+ char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
do {
@@ -840,18 +974,22 @@ void omap_stop_dma(int lch)
/* Disable all interrupts on the channel */
if (cpu_class_is_omap1())
- OMAP_DMA_CICR_REG(lch) = 0;
+ dma_write(0, CICR(lch));
+
+ l = dma_read(CCR(lch));
+ l &= ~OMAP_DMA_CCR_EN;
+ dma_write(l, CCR(lch));
- OMAP_DMA_CCR_REG(lch) &= ~OMAP_DMA_CCR_EN;
dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
}
+EXPORT_SYMBOL(omap_stop_dma);
/*
* Allows changing the DMA callback function or data. This may be needed if
* the driver shares a single DMA channel for multiple dma triggers.
*/
int omap_set_dma_callback(int lch,
- void (* callback)(int lch, u16 ch_status, void *data),
+ void (*callback)(int lch, u16 ch_status, void *data),
void *data)
{
unsigned long flags;
@@ -871,6 +1009,7 @@ int omap_set_dma_callback(int lch,
return 0;
}
+EXPORT_SYMBOL(omap_set_dma_callback);
/*
* Returns current physical source address for the given DMA channel.
@@ -884,15 +1023,24 @@ dma_addr_t omap_get_dma_src_pos(int lch)
{
dma_addr_t offset = 0;
- if (cpu_class_is_omap1())
- offset = (dma_addr_t) (OMAP1_DMA_CSSA_L_REG(lch) |
- (OMAP1_DMA_CSSA_U_REG(lch) << 16));
+ if (cpu_is_omap15xx())
+ offset = dma_read(CPC(lch));
+ else
+ offset = dma_read(CSAC(lch));
- if (cpu_class_is_omap2())
- offset = OMAP_DMA_CSAC_REG(lch);
+ /*
+ * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
+ * read before the DMA controller finished disabling the channel.
+ */
+ if (!cpu_is_omap15xx() && offset == 0)
+ offset = dma_read(CSAC(lch));
+
+ if (cpu_class_is_omap1())
+ offset |= (dma_read(CSSA_U(lch)) << 16);
return offset;
}
+EXPORT_SYMBOL(omap_get_dma_src_pos);
/*
* Returns current physical destination address for the given DMA channel.
@@ -906,25 +1054,30 @@ dma_addr_t omap_get_dma_dst_pos(int lch)
{
dma_addr_t offset = 0;
- if (cpu_class_is_omap1())
- offset = (dma_addr_t) (OMAP1_DMA_CDSA_L_REG(lch) |
- (OMAP1_DMA_CDSA_U_REG(lch) << 16));
+ if (cpu_is_omap15xx())
+ offset = dma_read(CPC(lch));
+ else
+ offset = dma_read(CDAC(lch));
- if (cpu_class_is_omap2())
- offset = OMAP_DMA_CDAC_REG(lch);
+ /*
+ * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
+ * read before the DMA controller finished disabling the channel.
+ */
+ if (!cpu_is_omap15xx() && offset == 0)
+ offset = dma_read(CDAC(lch));
+
+ if (cpu_class_is_omap1())
+ offset |= (dma_read(CDSA_U(lch)) << 16);
return offset;
}
+EXPORT_SYMBOL(omap_get_dma_dst_pos);
-/*
- * Returns current source transfer counting for the given DMA channel.
- * Can be used to monitor the progress of a transfer inside a block.
- * It must be called with disabled interrupts.
- */
-int omap_get_dma_src_addr_counter(int lch)
+int omap_get_dma_active_status(int lch)
{
- return (dma_addr_t) OMAP_DMA_CSAC_REG(lch);
+ return (dma_read(CCR(lch)) & OMAP_DMA_CCR_EN) != 0;
}
+EXPORT_SYMBOL(omap_get_dma_active_status);
int omap_dma_running(void)
{
@@ -936,7 +1089,7 @@ int omap_dma_running(void)
return 1;
for (lch = 0; lch < dma_chan_count; lch++)
- if (OMAP_DMA_CCR_REG(lch) & OMAP_DMA_CCR_EN)
+ if (dma_read(CCR(lch)) & OMAP_DMA_CCR_EN)
return 1;
return 0;
@@ -947,7 +1100,7 @@ int omap_dma_running(void)
* For this DMA link to start, you still need to start (see omap_start_dma)
* the first one. That will fire up the entire queue.
*/
-void omap_dma_link_lch (int lch_head, int lch_queue)
+void omap_dma_link_lch(int lch_head, int lch_queue)
{
if (omap_dma_in_1510_mode()) {
printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
@@ -964,11 +1117,12 @@ void omap_dma_link_lch (int lch_head, int lch_queue)
dma_chan[lch_head].next_lch = lch_queue;
}
+EXPORT_SYMBOL(omap_dma_link_lch);
/*
* Once the DMA queue is stopped, we can destroy it.
*/
-void omap_dma_unlink_lch (int lch_head, int lch_queue)
+void omap_dma_unlink_lch(int lch_head, int lch_queue)
{
if (omap_dma_in_1510_mode()) {
printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
@@ -983,7 +1137,6 @@ void omap_dma_unlink_lch (int lch_head, int lch_queue)
dump_stack();
}
-
if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
(dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) {
printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
@@ -993,12 +1146,15 @@ void omap_dma_unlink_lch (int lch_head, int lch_queue)
dma_chan[lch_head].next_lch = -1;
}
+EXPORT_SYMBOL(omap_dma_unlink_lch);
+
+/*----------------------------------------------------------------------------*/
#ifndef CONFIG_ARCH_OMAP1
/* Create chain of DMA channesls */
static void create_dma_lch_chain(int lch_head, int lch_queue)
{
- u32 w;
+ u32 l;
/* Check if this is the first link in chain */
if (dma_chan[lch_head].next_linked_ch == -1) {
@@ -1018,15 +1174,15 @@ static void create_dma_lch_chain(int lch_head, int lch_queue)
lch_queue;
}
- w = OMAP_DMA_CLNK_CTRL_REG(lch_head);
- w &= ~(0x1f);
- w |= lch_queue;
- OMAP_DMA_CLNK_CTRL_REG(lch_head) = w;
+ l = dma_read(CLNK_CTRL(lch_head));
+ l &= ~(0x1f);
+ l |= lch_queue;
+ dma_write(l, CLNK_CTRL(lch_head));
- w = OMAP_DMA_CLNK_CTRL_REG(lch_queue);
- w &= ~(0x1f);
- w |= (dma_chan[lch_queue].next_linked_ch);
- OMAP_DMA_CLNK_CTRL_REG(lch_queue) = w;
+ l = dma_read(CLNK_CTRL(lch_queue));
+ l &= ~(0x1f);
+ l |= (dma_chan[lch_queue].next_linked_ch);
+ dma_write(l, CLNK_CTRL(lch_queue));
}
/**
@@ -1061,7 +1217,7 @@ int omap_request_dma_chain(int dev_id, const char *dev_name,
}
if (unlikely((no_of_chans < 1
- || no_of_chans > OMAP_LOGICAL_DMA_CH_COUNT))) {
+ || no_of_chans > dma_lch_count))) {
printk(KERN_ERR "Invalid Number of channels requested\n");
return -EINVAL;
}
@@ -1116,6 +1272,7 @@ int omap_request_dma_chain(int dev_id, const char *dev_name,
for (i = 0; i < (no_of_chans - 1); i++)
create_dma_lch_chain(channels[i], channels[i + 1]);
}
+
return 0;
}
EXPORT_SYMBOL(omap_request_dma_chain);
@@ -1138,7 +1295,7 @@ int omap_modify_dma_chain_params(int chain_id,
/* Check for input params */
if (unlikely((chain_id < 0
- || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+ || chain_id >= dma_lch_count))) {
printk(KERN_ERR "Invalid chain id\n");
return -EINVAL;
}
@@ -1158,6 +1315,7 @@ int omap_modify_dma_chain_params(int chain_id,
*/
omap_set_dma_params(channels[i], &params);
}
+
return 0;
}
EXPORT_SYMBOL(omap_modify_dma_chain_params);
@@ -1176,7 +1334,7 @@ int omap_free_dma_chain(int chain_id)
u32 i;
/* Check for input params */
- if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+ if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
printk(KERN_ERR "Invalid chain id\n");
return -EINVAL;
}
@@ -1201,6 +1359,7 @@ int omap_free_dma_chain(int chain_id)
dma_linked_lch[chain_id].linked_dmach_q = NULL;
dma_linked_lch[chain_id].chain_mode = -1;
dma_linked_lch[chain_id].chain_state = -1;
+
return (0);
}
EXPORT_SYMBOL(omap_free_dma_chain);
@@ -1216,7 +1375,7 @@ EXPORT_SYMBOL(omap_free_dma_chain);
int omap_dma_chain_status(int chain_id)
{
/* Check for input params */
- if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+ if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
printk(KERN_ERR "Invalid chain id\n");
return -EINVAL;
}
@@ -1231,6 +1390,7 @@ int omap_dma_chain_status(int chain_id)
if (OMAP_DMA_CHAIN_QEMPTY(chain_id))
return OMAP_DMA_CHAIN_INACTIVE;
+
return OMAP_DMA_CHAIN_ACTIVE;
}
EXPORT_SYMBOL(omap_dma_chain_status);
@@ -1253,11 +1413,13 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
int elem_count, int frame_count, void *callbk_data)
{
int *channels;
- u32 w, lch;
+ u32 l, lch;
int start_dma = 0;
- /* if buffer size is less than 1 then there is
- * no use of starting the chain */
+ /*
+ * if buffer size is less than 1 then there is
+ * no use of starting the chain
+ */
if (elem_count < 1) {
printk(KERN_ERR "Invalid buffer size\n");
return -EINVAL;
@@ -1265,7 +1427,7 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
/* Check for input params */
if (unlikely((chain_id < 0
- || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+ || chain_id >= dma_lch_count))) {
printk(KERN_ERR "Invalid chain id\n");
return -EINVAL;
}
@@ -1294,20 +1456,24 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
/* Set the params to the free channel */
if (src_start != 0)
- OMAP2_DMA_CSSA_REG(lch) = src_start;
+ dma_write(src_start, CSSA(lch));
if (dest_start != 0)
- OMAP2_DMA_CDSA_REG(lch) = dest_start;
+ dma_write(dest_start, CDSA(lch));
/* Write the buffer size */
- OMAP_DMA_CEN_REG(lch) = elem_count;
- OMAP_DMA_CFN_REG(lch) = frame_count;
+ dma_write(elem_count, CEN(lch));
+ dma_write(frame_count, CFN(lch));
- /* If the chain is dynamically linked,
- * then we may have to start the chain if its not active */
+ /*
+ * If the chain is dynamically linked,
+ * then we may have to start the chain if its not active
+ */
if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_DYNAMIC_CHAIN) {
- /* In Dynamic chain, if the chain is not started,
- * queue the channel */
+ /*
+ * In Dynamic chain, if the chain is not started,
+ * queue the channel
+ */
if (dma_linked_lch[chain_id].chain_state ==
DMA_CHAIN_NOTSTARTED) {
/* Enable the link in previous channel */
@@ -1317,8 +1483,10 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
dma_chan[lch].state = DMA_CH_QUEUED;
}
- /* Chain is already started, make sure its active,
- * if not then start the chain */
+ /*
+ * Chain is already started, make sure its active,
+ * if not then start the chain
+ */
else {
start_dma = 1;
@@ -1327,8 +1495,8 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
enable_lnk(dma_chan[lch].prev_linked_ch);
dma_chan[lch].state = DMA_CH_QUEUED;
start_dma = 0;
- if (0 == ((1 << 7) & (OMAP_DMA_CCR_REG
- (dma_chan[lch].prev_linked_ch)))) {
+ if (0 == ((1 << 7) & dma_read(
+ CCR(dma_chan[lch].prev_linked_ch)))) {
disable_lnk(dma_chan[lch].
prev_linked_ch);
pr_debug("\n prev ch is stopped\n");
@@ -1344,27 +1512,28 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
}
omap_enable_channel_irq(lch);
- w = OMAP_DMA_CCR_REG(lch);
+ l = dma_read(CCR(lch));
- if ((0 == (w & (1 << 24))))
- w &= ~(1 << 25);
+ if ((0 == (l & (1 << 24))))
+ l &= ~(1 << 25);
else
- w |= (1 << 25);
+ l |= (1 << 25);
if (start_dma == 1) {
- if (0 == (w & (1 << 7))) {
- w |= (1 << 7);
+ if (0 == (l & (1 << 7))) {
+ l |= (1 << 7);
dma_chan[lch].state = DMA_CH_STARTED;
pr_debug("starting %d\n", lch);
- OMAP_DMA_CCR_REG(lch) = w;
+ dma_write(l, CCR(lch));
} else
start_dma = 0;
} else {
- if (0 == (w & (1 << 7)))
- OMAP_DMA_CCR_REG(lch) = w;
+ if (0 == (l & (1 << 7)))
+ dma_write(l, CCR(lch));
}
dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
}
}
+
return 0;
}
EXPORT_SYMBOL(omap_dma_chain_a_transfer);
@@ -1380,9 +1549,9 @@ EXPORT_SYMBOL(omap_dma_chain_a_transfer);
int omap_start_dma_chain_transfers(int chain_id)
{
int *channels;
- u32 w, i;
+ u32 l, i;
- if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+ if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
printk(KERN_ERR "Invalid chain id\n");
return -EINVAL;
}
@@ -1404,18 +1573,19 @@ int omap_start_dma_chain_transfers(int chain_id)
omap_enable_channel_irq(channels[0]);
}
- w = OMAP_DMA_CCR_REG(channels[0]);
- w |= (1 << 7);
+ l = dma_read(CCR(channels[0]));
+ l |= (1 << 7);
dma_linked_lch[chain_id].chain_state = DMA_CHAIN_STARTED;
dma_chan[channels[0]].state = DMA_CH_STARTED;
- if ((0 == (w & (1 << 24))))
- w &= ~(1 << 25);
+ if ((0 == (l & (1 << 24))))
+ l &= ~(1 << 25);
else
- w |= (1 << 25);
- OMAP_DMA_CCR_REG(channels[0]) = w;
+ l |= (1 << 25);
+ dma_write(l, CCR(channels[0]));
dma_chan[channels[0]].flags |= OMAP_DMA_ACTIVE;
+
return 0;
}
EXPORT_SYMBOL(omap_start_dma_chain_transfers);
@@ -1431,11 +1601,11 @@ EXPORT_SYMBOL(omap_start_dma_chain_transfers);
int omap_stop_dma_chain_transfers(int chain_id)
{
int *channels;
- u32 w, i;
+ u32 l, i;
u32 sys_cf;
/* Check for input params */
- if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+ if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
printk(KERN_ERR "Invalid chain id\n");
return -EINVAL;
}
@@ -1447,21 +1617,22 @@ int omap_stop_dma_chain_transfers(int chain_id)
}
channels = dma_linked_lch[chain_id].linked_dmach_q;
- /* DMA Errata:
+ /*
+ * DMA Errata:
* Special programming model needed to disable DMA before end of block
*/
- sys_cf = omap_readl(OMAP_DMA4_OCP_SYSCONFIG);
- w = sys_cf;
+ sys_cf = dma_read(OCP_SYSCONFIG);
+ l = sys_cf;
/* Middle mode reg set no Standby */
- w &= ~((1 << 12)|(1 << 13));
- omap_writel(w, OMAP_DMA4_OCP_SYSCONFIG);
+ l &= ~((1 << 12)|(1 << 13));
+ dma_write(l, OCP_SYSCONFIG);
for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
/* Stop the Channel transmission */
- w = OMAP_DMA_CCR_REG(channels[i]);
- w &= ~(1 << 7);
- OMAP_DMA_CCR_REG(channels[i]) = w;
+ l = dma_read(CCR(channels[i]));
+ l &= ~(1 << 7);
+ dma_write(l, CCR(channels[i]));
/* Disable the link in all the channels */
disable_lnk(channels[i]);
@@ -1474,7 +1645,8 @@ int omap_stop_dma_chain_transfers(int chain_id)
OMAP_DMA_CHAIN_QINIT(chain_id);
/* Errata - put in the old value */
- omap_writel(sys_cf, OMAP_DMA4_OCP_SYSCONFIG);
+ dma_write(sys_cf, OCP_SYSCONFIG);
+
return 0;
}
EXPORT_SYMBOL(omap_stop_dma_chain_transfers);
@@ -1497,7 +1669,7 @@ int omap_get_dma_chain_index(int chain_id, int *ei, int *fi)
int *channels;
/* Check for input params */
- if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+ if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
printk(KERN_ERR "Invalid chain id\n");
return -EINVAL;
}
@@ -1515,8 +1687,8 @@ int omap_get_dma_chain_index(int chain_id, int *ei, int *fi)
/* Get the current channel */
lch = channels[dma_linked_lch[chain_id].q_head];
- *ei = OMAP2_DMA_CCEN_REG(lch);
- *fi = OMAP2_DMA_CCFN_REG(lch);
+ *ei = dma_read(CCEN(lch));
+ *fi = dma_read(CCFN(lch));
return 0;
}
@@ -1537,7 +1709,7 @@ int omap_get_dma_chain_dst_pos(int chain_id)
int *channels;
/* Check for input params */
- if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+ if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
printk(KERN_ERR "Invalid chain id\n");
return -EINVAL;
}
@@ -1553,7 +1725,7 @@ int omap_get_dma_chain_dst_pos(int chain_id)
/* Get the current channel */
lch = channels[dma_linked_lch[chain_id].q_head];
- return (OMAP_DMA_CDAC_REG(lch));
+ return dma_read(CDAC(lch));
}
EXPORT_SYMBOL(omap_get_dma_chain_dst_pos);
@@ -1571,7 +1743,7 @@ int omap_get_dma_chain_src_pos(int chain_id)
int *channels;
/* Check for input params */
- if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+ if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
printk(KERN_ERR "Invalid chain id\n");
return -EINVAL;
}
@@ -1587,10 +1759,10 @@ int omap_get_dma_chain_src_pos(int chain_id)
/* Get the current channel */
lch = channels[dma_linked_lch[chain_id].q_head];
- return (OMAP_DMA_CSAC_REG(lch));
+ return dma_read(CSAC(lch));
}
EXPORT_SYMBOL(omap_get_dma_chain_src_pos);
-#endif
+#endif /* ifndef CONFIG_ARCH_OMAP1 */
/*----------------------------------------------------------------------------*/
@@ -1598,13 +1770,13 @@ EXPORT_SYMBOL(omap_get_dma_chain_src_pos);
static int omap1_dma_handle_ch(int ch)
{
- u16 csr;
+ u32 csr;
if (enable_1510_mode && ch >= 6) {
csr = dma_chan[ch].saved_csr;
dma_chan[ch].saved_csr = 0;
} else
- csr = OMAP_DMA_CSR_REG(ch);
+ csr = dma_read(CSR(ch));
if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
dma_chan[ch + 6].saved_csr = csr >> 7;
csr &= 0x7f;
@@ -1626,6 +1798,7 @@ static int omap1_dma_handle_ch(int ch)
dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
if (likely(dma_chan[ch].callback != NULL))
dma_chan[ch].callback(ch, csr, dma_chan[ch].data);
+
return 1;
}
@@ -1656,12 +1829,13 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
static int omap2_dma_handle_ch(int ch)
{
- u32 status = OMAP_DMA_CSR_REG(ch);
+ u32 status = dma_read(CSR(ch));
if (!status) {
if (printk_ratelimit())
- printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n", ch);
- omap_writel(1 << ch, OMAP_DMA4_IRQSTATUS_L0);
+ printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n",
+ ch);
+ dma_write(1 << ch, IRQSTATUS_L0);
return 0;
}
if (unlikely(dma_chan[ch].dev_id == -1)) {
@@ -1684,14 +1858,14 @@ static int omap2_dma_handle_ch(int ch)
printk(KERN_INFO "DMA misaligned error with device %d\n",
dma_chan[ch].dev_id);
- OMAP_DMA_CSR_REG(ch) = OMAP2_DMA_CSR_CLEAR_MASK;
- omap_writel(1 << ch, OMAP_DMA4_IRQSTATUS_L0);
+ dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(ch));
+ dma_write(1 << ch, IRQSTATUS_L0);
/* If the ch is not chained then chain_id will be -1 */
if (dma_chan[ch].chain_id != -1) {
int chain_id = dma_chan[ch].chain_id;
dma_chan[ch].state = DMA_CH_NOTSTARTED;
- if (OMAP_DMA_CLNK_CTRL_REG(ch) & (1 << 15))
+ if (dma_read(CLNK_CTRL(ch)) & (1 << 15))
dma_chan[dma_chan[ch].next_linked_ch].state =
DMA_CH_STARTED;
if (dma_linked_lch[chain_id].chain_mode ==
@@ -1701,13 +1875,13 @@ static int omap2_dma_handle_ch(int ch)
if (!OMAP_DMA_CHAIN_QEMPTY(chain_id))
OMAP_DMA_CHAIN_INCQHEAD(chain_id);
- status = OMAP_DMA_CSR_REG(ch);
+ status = dma_read(CSR(ch));
}
if (likely(dma_chan[ch].callback != NULL))
dma_chan[ch].callback(ch, status, dma_chan[ch].data);
- OMAP_DMA_CSR_REG(ch) = status;
+ dma_write(status, CSR(ch));
return 0;
}
@@ -1718,13 +1892,13 @@ static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
u32 val;
int i;
- val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
+ val = dma_read(IRQSTATUS_L0);
if (val == 0) {
if (printk_ratelimit())
printk(KERN_WARNING "Spurious DMA IRQ\n");
return IRQ_HANDLED;
}
- for (i = 0; i < OMAP_LOGICAL_DMA_CH_COUNT && val != 0; i++) {
+ for (i = 0; i < dma_lch_count && val != 0; i++) {
if (val & 1)
omap2_dma_handle_ch(i);
val >>= 1;
@@ -1748,7 +1922,7 @@ static struct irqaction omap24xx_dma_irq;
static struct lcd_dma_info {
spinlock_t lock;
int reserved;
- void (* callback)(u16 status, void *data);
+ void (*callback)(u16 status, void *data);
void *cb_data;
int active;
@@ -1770,6 +1944,7 @@ void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
lcd_dma.xres = fb_xres;
lcd_dma.yres = fb_yres;
}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1);
void omap_set_lcd_dma_src_port(int port)
{
@@ -1780,12 +1955,13 @@ void omap_set_lcd_dma_ext_controller(int external)
{
lcd_dma.ext_ctrl = external;
}
+EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
void omap_set_lcd_dma_single_transfer(int single)
{
lcd_dma.single_transfer = single;
}
-
+EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
void omap_set_lcd_dma_b1_rotation(int rotate)
{
@@ -1796,6 +1972,7 @@ void omap_set_lcd_dma_b1_rotation(int rotate)
}
lcd_dma.rotate = rotate;
}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
void omap_set_lcd_dma_b1_mirror(int mirror)
{
@@ -1805,6 +1982,7 @@ void omap_set_lcd_dma_b1_mirror(int mirror)
}
lcd_dma.mirror = mirror;
}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
{
@@ -1815,6 +1993,7 @@ void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
}
lcd_dma.vxres = vxres;
}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
{
@@ -1825,6 +2004,7 @@ void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
lcd_dma.xscale = xscale;
lcd_dma.yscale = yscale;
}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
static void set_b1_regs(void)
{
@@ -1855,8 +2035,11 @@ static void set_b1_regs(void)
xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
BUG_ON(vxres < lcd_dma.xres);
-#define PIXADDR(x,y) (lcd_dma.addr + ((y) * vxres * yscale + (x) * xscale) * es)
+
+#define PIXADDR(x, y) (lcd_dma.addr + \
+ ((y) * vxres * yscale + (x) * xscale) * es)
#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
+
switch (lcd_dma.rotate) {
case 0:
if (!lcd_dma.mirror) {
@@ -1865,8 +2048,8 @@ static void set_b1_regs(void)
/* 1510 DMA requires the bottom address to be 2 more
* than the actual last memory access location. */
if (omap_dma_in_1510_mode() &&
- lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
- bottom += 2;
+ lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
+ bottom += 2;
ei = PIXSTEP(0, 0, 1, 0);
fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
} else {
@@ -1993,7 +2176,7 @@ static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-int omap_request_lcd_dma(void (* callback)(u16 status, void *data),
+int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
void *data)
{
spin_lock_irq(&lcd_dma.lock);
@@ -2019,6 +2202,7 @@ int omap_request_lcd_dma(void (* callback)(u16 status, void *data),
return 0;
}
+EXPORT_SYMBOL(omap_request_lcd_dma);
void omap_free_lcd_dma(void)
{
@@ -2035,12 +2219,14 @@ void omap_free_lcd_dma(void)
lcd_dma.reserved = 0;
spin_unlock(&lcd_dma.lock);
}
+EXPORT_SYMBOL(omap_free_lcd_dma);
void omap_enable_lcd_dma(void)
{
u16 w;
- /* Set the Enable bit only if an external controller is
+ /*
+ * Set the Enable bit only if an external controller is
* connected. Otherwise the OMAP internal controller will
* start the transfer when it gets enabled.
*/
@@ -2057,6 +2243,7 @@ void omap_enable_lcd_dma(void)
w |= 1 << 7;
omap_writew(w, OMAP1610_DMA_LCD_CCR);
}
+EXPORT_SYMBOL(omap_enable_lcd_dma);
void omap_setup_lcd_dma(void)
{
@@ -2072,16 +2259,18 @@ void omap_setup_lcd_dma(void)
u16 w;
w = omap_readw(OMAP1610_DMA_LCD_CCR);
- /* If DMA was already active set the end_prog bit to have
+ /*
+ * If DMA was already active set the end_prog bit to have
* the programmed register set loaded into the active
* register set.
*/
w |= 1 << 11; /* End_prog */
if (!lcd_dma.single_transfer)
- w |= (3 << 8); /* Auto_init, repeat */
+ w |= (3 << 8); /* Auto_init, repeat */
omap_writew(w, OMAP1610_DMA_LCD_CCR);
}
}
+EXPORT_SYMBOL(omap_setup_lcd_dma);
void omap_stop_lcd_dma(void)
{
@@ -2099,6 +2288,7 @@ void omap_stop_lcd_dma(void)
w &= ~(1 << 8);
omap_writew(w, OMAP1610_DMA_LCD_CTRL);
}
+EXPORT_SYMBOL(omap_stop_lcd_dma);
/*----------------------------------------------------------------------------*/
@@ -2106,27 +2296,55 @@ static int __init omap_init_dma(void)
{
int ch, r;
+ if (cpu_class_is_omap1()) {
+ omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP1_DMA_BASE);
+ dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
+ } else if (cpu_is_omap24xx()) {
+ omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP24XX_DMA4_BASE);
+ dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+ } else if (cpu_is_omap34xx()) {
+ omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP34XX_DMA4_BASE);
+ dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+ } else {
+ pr_err("DMA init failed for unsupported omap\n");
+ return -ENODEV;
+ }
+
+ dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count,
+ GFP_KERNEL);
+ if (!dma_chan)
+ return -ENOMEM;
+
+ if (cpu_class_is_omap2()) {
+ dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
+ dma_lch_count, GFP_KERNEL);
+ if (!dma_linked_lch) {
+ kfree(dma_chan);
+ return -ENOMEM;
+ }
+ }
+
if (cpu_is_omap15xx()) {
printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
dma_chan_count = 9;
enable_1510_mode = 1;
} else if (cpu_is_omap16xx() || cpu_is_omap730()) {
printk(KERN_INFO "OMAP DMA hardware version %d\n",
- omap_readw(OMAP_DMA_HW_ID));
+ dma_read(HW_ID));
printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
- (omap_readw(OMAP_DMA_CAPS_0_U) << 16) |
- omap_readw(OMAP_DMA_CAPS_0_L),
- (omap_readw(OMAP_DMA_CAPS_1_U) << 16) |
- omap_readw(OMAP_DMA_CAPS_1_L),
- omap_readw(OMAP_DMA_CAPS_2), omap_readw(OMAP_DMA_CAPS_3),
- omap_readw(OMAP_DMA_CAPS_4));
+ (dma_read(CAPS_0_U) << 16) |
+ dma_read(CAPS_0_L),
+ (dma_read(CAPS_1_U) << 16) |
+ dma_read(CAPS_1_L),
+ dma_read(CAPS_2), dma_read(CAPS_3),
+ dma_read(CAPS_4));
if (!enable_1510_mode) {
u16 w;
/* Disable OMAP 3.0/3.1 compatibility mode. */
- w = omap_readw(OMAP_DMA_GSCR);
+ w = dma_read(GSCR);
w |= 1 << 3;
- omap_writew(w, OMAP_DMA_GSCR);
+ dma_write(w, GSCR);
dma_chan_count = 16;
} else
dma_chan_count = 9;
@@ -2139,19 +2357,17 @@ static int __init omap_init_dma(void)
omap_writew(w, OMAP1610_DMA_LCD_CTRL);
}
} else if (cpu_class_is_omap2()) {
- u8 revision = omap_readb(OMAP_DMA4_REVISION);
+ u8 revision = dma_read(REVISION) & 0xff;
printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
revision >> 4, revision & 0xf);
- dma_chan_count = OMAP_LOGICAL_DMA_CH_COUNT;
+ dma_chan_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
} else {
dma_chan_count = 0;
return 0;
}
- memset(&lcd_dma, 0, sizeof(lcd_dma));
spin_lock_init(&lcd_dma.lock);
spin_lock_init(&dma_chan_lock);
- memset(&dma_chan, 0, sizeof(dma_chan));
for (ch = 0; ch < dma_chan_count; ch++) {
omap_clear_dma(ch);
@@ -2162,8 +2378,10 @@ static int __init omap_init_dma(void)
continue;
if (cpu_class_is_omap1()) {
- /* request_irq() doesn't like dev_id (ie. ch) being
- * zero, so we have to kludge around this. */
+ /*
+ * request_irq() doesn't like dev_id (ie. ch) being
+ * zero, so we have to kludge around this.
+ */
r = request_irq(omap1_dma_irq[ch],
omap1_dma_irq_handler, 0, "DMA",
(void *) (ch + 1));
@@ -2208,48 +2426,4 @@ static int __init omap_init_dma(void)
arch_initcall(omap_init_dma);
-EXPORT_SYMBOL(omap_get_dma_src_pos);
-EXPORT_SYMBOL(omap_get_dma_dst_pos);
-EXPORT_SYMBOL(omap_get_dma_src_addr_counter);
-EXPORT_SYMBOL(omap_clear_dma);
-EXPORT_SYMBOL(omap_set_dma_priority);
-EXPORT_SYMBOL(omap_request_dma);
-EXPORT_SYMBOL(omap_free_dma);
-EXPORT_SYMBOL(omap_start_dma);
-EXPORT_SYMBOL(omap_stop_dma);
-EXPORT_SYMBOL(omap_set_dma_callback);
-EXPORT_SYMBOL(omap_enable_dma_irq);
-EXPORT_SYMBOL(omap_disable_dma_irq);
-
-EXPORT_SYMBOL(omap_set_dma_transfer_params);
-EXPORT_SYMBOL(omap_set_dma_color_mode);
-EXPORT_SYMBOL(omap_set_dma_write_mode);
-
-EXPORT_SYMBOL(omap_set_dma_src_params);
-EXPORT_SYMBOL(omap_set_dma_src_index);
-EXPORT_SYMBOL(omap_set_dma_src_data_pack);
-EXPORT_SYMBOL(omap_set_dma_src_burst_mode);
-
-EXPORT_SYMBOL(omap_set_dma_dest_params);
-EXPORT_SYMBOL(omap_set_dma_dest_index);
-EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
-EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
-
-EXPORT_SYMBOL(omap_set_dma_params);
-
-EXPORT_SYMBOL(omap_dma_link_lch);
-EXPORT_SYMBOL(omap_dma_unlink_lch);
-
-EXPORT_SYMBOL(omap_request_lcd_dma);
-EXPORT_SYMBOL(omap_free_lcd_dma);
-EXPORT_SYMBOL(omap_enable_lcd_dma);
-EXPORT_SYMBOL(omap_setup_lcd_dma);
-EXPORT_SYMBOL(omap_stop_lcd_dma);
-EXPORT_SYMBOL(omap_set_lcd_dma_b1);
-EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
-EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 302ad8dff2cb..f22506af0e67 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -38,34 +38,113 @@
#include <asm/arch/irqs.h>
/* register offsets */
-#define OMAP_TIMER_ID_REG 0x00
-#define OMAP_TIMER_OCP_CFG_REG 0x10
-#define OMAP_TIMER_SYS_STAT_REG 0x14
-#define OMAP_TIMER_STAT_REG 0x18
-#define OMAP_TIMER_INT_EN_REG 0x1c
-#define OMAP_TIMER_WAKEUP_EN_REG 0x20
-#define OMAP_TIMER_CTRL_REG 0x24
-#define OMAP_TIMER_COUNTER_REG 0x28
-#define OMAP_TIMER_LOAD_REG 0x2c
-#define OMAP_TIMER_TRIGGER_REG 0x30
-#define OMAP_TIMER_WRITE_PEND_REG 0x34
-#define OMAP_TIMER_MATCH_REG 0x38
-#define OMAP_TIMER_CAPTURE_REG 0x3c
-#define OMAP_TIMER_IF_CTRL_REG 0x40
-
-/* timer control reg bits */
-#define OMAP_TIMER_CTRL_GPOCFG (1 << 14)
-#define OMAP_TIMER_CTRL_CAPTMODE (1 << 13)
-#define OMAP_TIMER_CTRL_PT (1 << 12)
-#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH (0x1 << 8)
-#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW (0x2 << 8)
-#define OMAP_TIMER_CTRL_TCM_BOTHEDGES (0x3 << 8)
-#define OMAP_TIMER_CTRL_SCPWM (1 << 7)
-#define OMAP_TIMER_CTRL_CE (1 << 6) /* compare enable */
-#define OMAP_TIMER_CTRL_PRE (1 << 5) /* prescaler enable */
-#define OMAP_TIMER_CTRL_PTV_SHIFT 2 /* how much to shift the prescaler value */
-#define OMAP_TIMER_CTRL_AR (1 << 1) /* auto-reload enable */
-#define OMAP_TIMER_CTRL_ST (1 << 0) /* start timer */
+#define _OMAP_TIMER_ID_OFFSET 0x00
+#define _OMAP_TIMER_OCP_CFG_OFFSET 0x10
+#define _OMAP_TIMER_SYS_STAT_OFFSET 0x14
+#define _OMAP_TIMER_STAT_OFFSET 0x18
+#define _OMAP_TIMER_INT_EN_OFFSET 0x1c
+#define _OMAP_TIMER_WAKEUP_EN_OFFSET 0x20
+#define _OMAP_TIMER_CTRL_OFFSET 0x24
+#define OMAP_TIMER_CTRL_GPOCFG (1 << 14)
+#define OMAP_TIMER_CTRL_CAPTMODE (1 << 13)
+#define OMAP_TIMER_CTRL_PT (1 << 12)
+#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH (0x1 << 8)
+#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW (0x2 << 8)
+#define OMAP_TIMER_CTRL_TCM_BOTHEDGES (0x3 << 8)
+#define OMAP_TIMER_CTRL_SCPWM (1 << 7)
+#define OMAP_TIMER_CTRL_CE (1 << 6) /* compare enable */
+#define OMAP_TIMER_CTRL_PRE (1 << 5) /* prescaler enable */
+#define OMAP_TIMER_CTRL_PTV_SHIFT 2 /* prescaler value shift */
+#define OMAP_TIMER_CTRL_POSTED (1 << 2)
+#define OMAP_TIMER_CTRL_AR (1 << 1) /* auto-reload enable */
+#define OMAP_TIMER_CTRL_ST (1 << 0) /* start timer */
+#define _OMAP_TIMER_COUNTER_OFFSET 0x28
+#define _OMAP_TIMER_LOAD_OFFSET 0x2c
+#define _OMAP_TIMER_TRIGGER_OFFSET 0x30
+#define _OMAP_TIMER_WRITE_PEND_OFFSET 0x34
+#define WP_NONE 0 /* no write pending bit */
+#define WP_TCLR (1 << 0)
+#define WP_TCRR (1 << 1)
+#define WP_TLDR (1 << 2)
+#define WP_TTGR (1 << 3)
+#define WP_TMAR (1 << 4)
+#define WP_TPIR (1 << 5)
+#define WP_TNIR (1 << 6)
+#define WP_TCVR (1 << 7)
+#define WP_TOCR (1 << 8)
+#define WP_TOWR (1 << 9)
+#define _OMAP_TIMER_MATCH_OFFSET 0x38
+#define _OMAP_TIMER_CAPTURE_OFFSET 0x3c
+#define _OMAP_TIMER_IF_CTRL_OFFSET 0x40
+#define _OMAP_TIMER_CAPTURE2_OFFSET 0x44 /* TCAR2, 34xx only */
+#define _OMAP_TIMER_TICK_POS_OFFSET 0x48 /* TPIR, 34xx only */
+#define _OMAP_TIMER_TICK_NEG_OFFSET 0x4c /* TNIR, 34xx only */
+#define _OMAP_TIMER_TICK_COUNT_OFFSET 0x50 /* TCVR, 34xx only */
+#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET 0x54 /* TOCR, 34xx only */
+#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET 0x58 /* TOWR, 34xx only */
+
+/* register offsets with the write pending bit encoded */
+#define WPSHIFT 16
+
+#define OMAP_TIMER_ID_REG (_OMAP_TIMER_ID_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_OCP_CFG_REG (_OMAP_TIMER_OCP_CFG_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_SYS_STAT_REG (_OMAP_TIMER_SYS_STAT_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_STAT_REG (_OMAP_TIMER_STAT_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_INT_EN_REG (_OMAP_TIMER_INT_EN_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_WAKEUP_EN_REG (_OMAP_TIMER_WAKEUP_EN_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_CTRL_REG (_OMAP_TIMER_CTRL_OFFSET \
+ | (WP_TCLR << WPSHIFT))
+
+#define OMAP_TIMER_COUNTER_REG (_OMAP_TIMER_COUNTER_OFFSET \
+ | (WP_TCRR << WPSHIFT))
+
+#define OMAP_TIMER_LOAD_REG (_OMAP_TIMER_LOAD_OFFSET \
+ | (WP_TLDR << WPSHIFT))
+
+#define OMAP_TIMER_TRIGGER_REG (_OMAP_TIMER_TRIGGER_OFFSET \
+ | (WP_TTGR << WPSHIFT))
+
+#define OMAP_TIMER_WRITE_PEND_REG (_OMAP_TIMER_WRITE_PEND_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_MATCH_REG (_OMAP_TIMER_MATCH_OFFSET \
+ | (WP_TMAR << WPSHIFT))
+
+#define OMAP_TIMER_CAPTURE_REG (_OMAP_TIMER_CAPTURE_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_IF_CTRL_REG (_OMAP_TIMER_IF_CTRL_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_CAPTURE2_REG (_OMAP_TIMER_CAPTURE2_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_TICK_POS_REG (_OMAP_TIMER_TICK_POS_OFFSET \
+ | (WP_TPIR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_NEG_REG (_OMAP_TIMER_TICK_NEG_OFFSET \
+ | (WP_TNIR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_COUNT_REG (_OMAP_TIMER_TICK_COUNT_OFFSET \
+ | (WP_TCVR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_INT_MASK_SET_REG \
+ (_OMAP_TIMER_TICK_INT_MASK_SET_OFFSET | (WP_TOCR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG \
+ (_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
struct omap_dm_timer {
unsigned long phys_base;
@@ -76,6 +155,7 @@ struct omap_dm_timer {
void __iomem *io_base;
unsigned reserved:1;
unsigned enabled:1;
+ unsigned posted:1;
};
#ifdef CONFIG_ARCH_OMAP1
@@ -181,16 +261,34 @@ static struct clk **dm_source_clocks;
static spinlock_t dm_timer_lock;
-static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg)
+/*
+ * Reads timer registers in posted and non-posted mode. The posted mode bit
+ * is encoded in reg. Note that in posted mode write pending bit must be
+ * checked. Otherwise a read of a non completed write will produce an error.
+ */
+static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, u32 reg)
{
- return readl(timer->io_base + reg);
+ if (timer->posted)
+ while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff))
+ & (reg >> WPSHIFT))
+ cpu_relax();
+ return readl(timer->io_base + (reg & 0xff));
}
-static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value)
+/*
+ * Writes timer registers in posted and non-posted mode. The posted mode bit
+ * is encoded in reg. Note that in posted mode the write pending bit must be
+ * checked. Otherwise a write on a register which has a pending write will be
+ * lost.
+ */
+static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg,
+ u32 value)
{
- writel(value, timer->io_base + reg);
- while (omap_dm_timer_read_reg(timer, OMAP_TIMER_WRITE_PEND_REG))
- ;
+ if (timer->posted)
+ while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff))
+ & (reg >> WPSHIFT))
+ cpu_relax();
+ writel(value, timer->io_base + (reg & 0xff));
}
static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer)
@@ -217,17 +315,23 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer)
}
omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
- /* Set to smart-idle mode */
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_OCP_CFG_REG);
- l |= 0x02 << 3;
-
- if (cpu_class_is_omap2() && timer == &dm_timers[0]) {
- /* Enable wake-up only for GPT1 on OMAP2 CPUs*/
+ l |= 0x02 << 3; /* Set to smart-idle mode */
+ l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */
+
+ /*
+ * Enable wake-up only for GPT1 on OMAP2 CPUs.
+ * FIXME: All timers should have wake-up enabled and clear
+ * PRCM status.
+ */
+ if (cpu_class_is_omap2() && (timer == &dm_timers[0]))
l |= 1 << 2;
- /* Non-posted mode */
- omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0);
- }
omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l);
+
+ /* Match hardware reset default of posted mode */
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG,
+ OMAP_TIMER_CTRL_POSTED);
+ timer->posted = 1;
}
static void omap_dm_timer_prepare(struct omap_dm_timer *timer)
@@ -434,9 +538,32 @@ void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
l &= ~OMAP_TIMER_CTRL_AR;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
+
+ /* REVISIT: hw feature, ttgr overtaking tldr? */
+ while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)))
+ cpu_relax();
+
omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
}
+/* Optimized set_load which removes costly spin wait in timer_start */
+void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
+ unsigned int load)
+{
+ u32 l;
+
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+ if (autoreload)
+ l |= OMAP_TIMER_CTRL_AR;
+ else
+ l &= ~OMAP_TIMER_CTRL_AR;
+ l |= OMAP_TIMER_CTRL_ST;
+
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, load);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+}
+
void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
unsigned int match)
{
@@ -451,7 +578,6 @@ void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
}
-
void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
int toggle, int trigger)
{
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 9cf83c4da9fa..c7f74064696c 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -15,95 +15,66 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/platform_device.h>
#include <linux/wait.h>
#include <linux/completion.h>
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/delay.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
+#include <linux/io.h>
#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/dsp_common.h>
#include <asm/arch/mcbsp.h>
-#ifdef CONFIG_MCBSP_DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...) do { } while (0)
-#endif
-
-struct omap_mcbsp {
- u32 io_base;
- u8 id;
- u8 free;
- omap_mcbsp_word_length rx_word_length;
- omap_mcbsp_word_length tx_word_length;
-
- omap_mcbsp_io_type_t io_type; /* IRQ or poll */
- /* IRQ based TX/RX */
- int rx_irq;
- int tx_irq;
-
- /* DMA stuff */
- u8 dma_rx_sync;
- short dma_rx_lch;
- u8 dma_tx_sync;
- short dma_tx_lch;
-
- /* Completion queues */
- struct completion tx_irq_completion;
- struct completion rx_irq_completion;
- struct completion tx_dma_completion;
- struct completion rx_dma_completion;
-
- spinlock_t lock;
-};
-
static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT];
-#ifdef CONFIG_ARCH_OMAP1
-static struct clk *mcbsp_dsp_ck = 0;
-static struct clk *mcbsp_api_ck = 0;
-static struct clk *mcbsp_dspxor_ck = 0;
-#endif
-#ifdef CONFIG_ARCH_OMAP2
-static struct clk *mcbsp1_ick = 0;
-static struct clk *mcbsp1_fck = 0;
-static struct clk *mcbsp2_ick = 0;
-static struct clk *mcbsp2_fck = 0;
-#endif
+
+#define omap_mcbsp_check_valid_id(id) (mcbsp[id].pdata && \
+ mcbsp[id].pdata->ops && \
+ mcbsp[id].pdata->ops->check && \
+ (mcbsp[id].pdata->ops->check(id) == 0))
static void omap_mcbsp_dump_reg(u8 id)
{
- DBG("**** MCBSP%d regs ****\n", mcbsp[id].id);
- DBG("DRR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DRR2));
- DBG("DRR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DRR1));
- DBG("DXR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DXR2));
- DBG("DXR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DXR1));
- DBG("SPCR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR2));
- DBG("SPCR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR1));
- DBG("RCR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, RCR2));
- DBG("RCR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, RCR1));
- DBG("XCR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, XCR2));
- DBG("XCR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, XCR1));
- DBG("SRGR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR2));
- DBG("SRGR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR1));
- DBG("PCR0: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, PCR0));
- DBG("***********************\n");
+ dev_dbg(mcbsp[id].dev, "**** McBSP%d regs ****\n", mcbsp[id].id);
+ dev_dbg(mcbsp[id].dev, "DRR2: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp[id].io_base, DRR2));
+ dev_dbg(mcbsp[id].dev, "DRR1: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp[id].io_base, DRR1));
+ dev_dbg(mcbsp[id].dev, "DXR2: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp[id].io_base, DXR2));
+ dev_dbg(mcbsp[id].dev, "DXR1: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp[id].io_base, DXR1));
+ dev_dbg(mcbsp[id].dev, "SPCR2: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR2));
+ dev_dbg(mcbsp[id].dev, "SPCR1: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR1));
+ dev_dbg(mcbsp[id].dev, "RCR2: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp[id].io_base, RCR2));
+ dev_dbg(mcbsp[id].dev, "RCR1: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp[id].io_base, RCR1));
+ dev_dbg(mcbsp[id].dev, "XCR2: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp[id].io_base, XCR2));
+ dev_dbg(mcbsp[id].dev, "XCR1: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp[id].io_base, XCR1));
+ dev_dbg(mcbsp[id].dev, "SRGR2: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR2));
+ dev_dbg(mcbsp[id].dev, "SRGR1: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR1));
+ dev_dbg(mcbsp[id].dev, "PCR0: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp[id].io_base, PCR0));
+ dev_dbg(mcbsp[id].dev, "***********************\n");
}
static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
{
struct omap_mcbsp *mcbsp_tx = dev_id;
- DBG("TX IRQ callback : 0x%x\n",
- OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
+ dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n",
+ OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
complete(&mcbsp_tx->tx_irq_completion);
+
return IRQ_HANDLED;
}
@@ -111,10 +82,11 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
{
struct omap_mcbsp *mcbsp_rx = dev_id;
- DBG("RX IRQ callback : 0x%x\n",
- OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
+ dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n",
+ OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
complete(&mcbsp_rx->rx_irq_completion);
+
return IRQ_HANDLED;
}
@@ -122,8 +94,8 @@ static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data)
{
struct omap_mcbsp *mcbsp_dma_tx = data;
- DBG("TX DMA callback : 0x%x\n",
- OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2));
+ dev_dbg(mcbsp_dma_tx->dev, "TX DMA callback : 0x%x\n",
+ OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2));
/* We can free the channels */
omap_free_dma(mcbsp_dma_tx->dma_tx_lch);
@@ -136,8 +108,8 @@ static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data)
{
struct omap_mcbsp *mcbsp_dma_rx = data;
- DBG("RX DMA callback : 0x%x\n",
- OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2));
+ dev_dbg(mcbsp_dma_rx->dev, "RX DMA callback : 0x%x\n",
+ OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2));
/* We can free the channels */
omap_free_dma(mcbsp_dma_rx->dma_rx_lch);
@@ -146,19 +118,24 @@ static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data)
complete(&mcbsp_dma_rx->rx_dma_completion);
}
-
/*
* omap_mcbsp_config simply write a config to the
* appropriate McBSP.
* You either call this function or set the McBSP registers
* by yourself before calling omap_mcbsp_start().
*/
-
-void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config)
+void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
{
- u32 io_base = mcbsp[id].io_base;
+ u32 io_base;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return;
+ }
- DBG("OMAP-McBSP: McBSP%d io_base: 0x%8x\n", id+1, io_base);
+ io_base = mcbsp[id].io_base;
+ dev_dbg(mcbsp[id].dev, "Configuring McBSP%d io_base: 0x%8x\n",
+ mcbsp[id].id, io_base);
/* We write the given config */
OMAP_MCBSP_WRITE(io_base, SPCR2, config->spcr2);
@@ -173,83 +150,7 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config
OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1);
OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0);
}
-
-
-
-static int omap_mcbsp_check(unsigned int id)
-{
- if (cpu_is_omap730()) {
- if (id > OMAP_MAX_MCBSP_COUNT - 1) {
- printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1);
- return -1;
- }
- return 0;
- }
-
- if (cpu_is_omap15xx() || cpu_is_omap16xx() || cpu_is_omap24xx()) {
- if (id > OMAP_MAX_MCBSP_COUNT) {
- printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1);
- return -1;
- }
- return 0;
- }
-
- return -1;
-}
-
-#ifdef CONFIG_ARCH_OMAP1
-static void omap_mcbsp_dsp_request(void)
-{
- if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
- int ret;
-
- ret = omap_dsp_request_mem();
- if (ret < 0) {
- printk(KERN_ERR "Could not get dsp memory: %i\n", ret);
- return;
- }
-
- clk_enable(mcbsp_dsp_ck);
- clk_enable(mcbsp_api_ck);
-
- /* enable 12MHz clock to mcbsp 1 & 3 */
- clk_enable(mcbsp_dspxor_ck);
-
- /*
- * DSP external peripheral reset
- * FIXME: This should be moved to dsp code
- */
- __raw_writew(__raw_readw(DSP_RSTCT2) | 1 | 1 << 1,
- DSP_RSTCT2);
- }
-}
-
-static void omap_mcbsp_dsp_free(void)
-{
- if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
- omap_dsp_release_mem();
- clk_disable(mcbsp_dspxor_ck);
- clk_disable(mcbsp_dsp_ck);
- clk_disable(mcbsp_api_ck);
- }
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2
-static void omap2_mcbsp2_mux_setup(void)
-{
- if (cpu_is_omap2420()) {
- omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
- omap_cfg_reg(R14_24XX_MCBSP2_FSX);
- omap_cfg_reg(W15_24XX_MCBSP2_DR);
- omap_cfg_reg(V15_24XX_MCBSP2_DX);
- omap_cfg_reg(V14_24XX_GPIO117);
- }
- /*
- * Need to add MUX settings for OMAP 2430 SDP
- */
-}
-#endif
+EXPORT_SYMBOL(omap_mcbsp_config);
/*
* We can choose between IRQ based or polled IO.
@@ -257,13 +158,16 @@ static void omap2_mcbsp2_mux_setup(void)
*/
int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type)
{
- if (omap_mcbsp_check(id) < 0)
- return -EINVAL;
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
spin_lock(&mcbsp[id].lock);
if (!mcbsp[id].free) {
- printk (KERN_ERR "OMAP-McBSP: McBSP%d is currently in use\n", id + 1);
+ dev_err(mcbsp[id].dev, "McBSP%d is currently in use\n",
+ mcbsp[id].id);
spin_unlock(&mcbsp[id].lock);
return -EINVAL;
}
@@ -274,38 +178,26 @@ int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type)
return 0;
}
+EXPORT_SYMBOL(omap_mcbsp_set_io_type);
int omap_mcbsp_request(unsigned int id)
{
int err;
- if (omap_mcbsp_check(id) < 0)
- return -EINVAL;
-
-#ifdef CONFIG_ARCH_OMAP1
- /*
- * On 1510, 1610 and 1710, McBSP1 and McBSP3
- * are DSP public peripherals.
- */
- if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
- omap_mcbsp_dsp_request();
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2
- if (cpu_is_omap24xx()) {
- if (id == OMAP_MCBSP1) {
- clk_enable(mcbsp1_ick);
- clk_enable(mcbsp1_fck);
- } else {
- clk_enable(mcbsp2_ick);
- clk_enable(mcbsp2_fck);
- }
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
}
-#endif
+
+ if (mcbsp[id].pdata->ops->request)
+ mcbsp[id].pdata->ops->request(id);
+
+ clk_enable(mcbsp[id].clk);
spin_lock(&mcbsp[id].lock);
if (!mcbsp[id].free) {
- printk (KERN_ERR "OMAP-McBSP: McBSP%d is currently in use\n", id + 1);
+ dev_err(mcbsp[id].dev, "McBSP%d is currently in use\n",
+ mcbsp[id].id);
spin_unlock(&mcbsp[id].lock);
return -1;
}
@@ -315,24 +207,23 @@ int omap_mcbsp_request(unsigned int id)
if (mcbsp[id].io_type == OMAP_MCBSP_IRQ_IO) {
/* We need to get IRQs here */
- err = request_irq(mcbsp[id].tx_irq, omap_mcbsp_tx_irq_handler, 0,
- "McBSP",
- (void *) (&mcbsp[id]));
+ err = request_irq(mcbsp[id].tx_irq, omap_mcbsp_tx_irq_handler,
+ 0, "McBSP", (void *) (&mcbsp[id]));
if (err != 0) {
- printk(KERN_ERR "OMAP-McBSP: Unable to request TX IRQ %d for McBSP%d\n",
- mcbsp[id].tx_irq, mcbsp[id].id);
+ dev_err(mcbsp[id].dev, "Unable to request TX IRQ %d "
+ "for McBSP%d\n", mcbsp[id].tx_irq,
+ mcbsp[id].id);
return err;
}
init_completion(&(mcbsp[id].tx_irq_completion));
-
- err = request_irq(mcbsp[id].rx_irq, omap_mcbsp_rx_irq_handler, 0,
- "McBSP",
- (void *) (&mcbsp[id]));
+ err = request_irq(mcbsp[id].rx_irq, omap_mcbsp_rx_irq_handler,
+ 0, "McBSP", (void *) (&mcbsp[id]));
if (err != 0) {
- printk(KERN_ERR "OMAP-McBSP: Unable to request RX IRQ %d for McBSP%d\n",
- mcbsp[id].rx_irq, mcbsp[id].id);
+ dev_err(mcbsp[id].dev, "Unable to request RX IRQ %d "
+ "for McBSP%d\n", mcbsp[id].rx_irq,
+ mcbsp[id].id);
free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id]));
return err;
}
@@ -341,36 +232,25 @@ int omap_mcbsp_request(unsigned int id)
}
return 0;
-
}
+EXPORT_SYMBOL(omap_mcbsp_request);
void omap_mcbsp_free(unsigned int id)
{
- if (omap_mcbsp_check(id) < 0)
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return;
-
-#ifdef CONFIG_ARCH_OMAP1
- if (cpu_class_is_omap1()) {
- if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
- omap_mcbsp_dsp_free();
}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2
- if (cpu_is_omap24xx()) {
- if (id == OMAP_MCBSP1) {
- clk_disable(mcbsp1_ick);
- clk_disable(mcbsp1_fck);
- } else {
- clk_disable(mcbsp2_ick);
- clk_disable(mcbsp2_fck);
- }
- }
-#endif
+
+ if (mcbsp[id].pdata->ops->free)
+ mcbsp[id].pdata->ops->free(id);
+
+ clk_disable(mcbsp[id].clk);
spin_lock(&mcbsp[id].lock);
if (mcbsp[id].free) {
- printk (KERN_ERR "OMAP-McBSP: McBSP%d was not reserved\n", id + 1);
+ dev_err(mcbsp[id].dev, "McBSP%d was not reserved\n",
+ mcbsp[id].id);
spin_unlock(&mcbsp[id].lock);
return;
}
@@ -384,6 +264,7 @@ void omap_mcbsp_free(unsigned int id)
free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id]));
}
}
+EXPORT_SYMBOL(omap_mcbsp_free);
/*
* Here we start the McBSP, by enabling the sample
@@ -395,13 +276,15 @@ void omap_mcbsp_start(unsigned int id)
u32 io_base;
u16 w;
- if (omap_mcbsp_check(id) < 0)
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return;
+ }
io_base = mcbsp[id].io_base;
- mcbsp[id].rx_word_length = ((OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7);
- mcbsp[id].tx_word_length = ((OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7);
+ mcbsp[id].rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7;
+ mcbsp[id].tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7;
/* Start the sample generator */
w = OMAP_MCBSP_READ(io_base, SPCR2);
@@ -422,20 +305,22 @@ void omap_mcbsp_start(unsigned int id)
/* Dump McBSP Regs */
omap_mcbsp_dump_reg(id);
-
}
+EXPORT_SYMBOL(omap_mcbsp_start);
void omap_mcbsp_stop(unsigned int id)
{
u32 io_base;
u16 w;
- if (omap_mcbsp_check(id) < 0)
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return;
+ }
io_base = mcbsp[id].io_base;
- /* Reset transmitter */
+ /* Reset transmitter */
w = OMAP_MCBSP_READ(io_base, SPCR2);
OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1));
@@ -447,12 +332,19 @@ void omap_mcbsp_stop(unsigned int id)
w = OMAP_MCBSP_READ(io_base, SPCR2);
OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
}
-
+EXPORT_SYMBOL(omap_mcbsp_stop);
/* polled mcbsp i/o operations */
int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
{
- u32 base = mcbsp[id].io_base;
+ u32 base;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+
+ base = mcbsp[id].io_base;
writew(buf, base + OMAP_MCBSP_REG_DXR1);
/* if frame sync error - clear the error */
if (readw(base + OMAP_MCBSP_REG_SPCR2) & XSYNC_ERR) {
@@ -474,18 +366,27 @@ int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
(XRST),
base + OMAP_MCBSP_REG_SPCR2);
udelay(10);
- printk(KERN_ERR
- " Could not write to McBSP Register\n");
+ dev_err(mcbsp[id].dev, "Could not write to"
+ " McBSP%d Register\n", mcbsp[id].id);
return -2;
}
}
}
+
return 0;
}
+EXPORT_SYMBOL(omap_mcbsp_pollwrite);
-int omap_mcbsp_pollread(unsigned int id, u16 * buf)
+int omap_mcbsp_pollread(unsigned int id, u16 *buf)
{
- u32 base = mcbsp[id].io_base;
+ u32 base;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+
+ base = mcbsp[id].io_base;
/* if frame sync error - clear the error */
if (readw(base + OMAP_MCBSP_REG_SPCR1) & RSYNC_ERR) {
/* clear error */
@@ -506,15 +407,17 @@ int omap_mcbsp_pollread(unsigned int id, u16 * buf)
(RRST),
base + OMAP_MCBSP_REG_SPCR1);
udelay(10);
- printk(KERN_ERR
- " Could not read from McBSP Register\n");
+ dev_err(mcbsp[id].dev, "Could not read from"
+ " McBSP%d Register\n", mcbsp[id].id);
return -2;
}
}
}
*buf = readw(base + OMAP_MCBSP_REG_DRR1);
+
return 0;
}
+EXPORT_SYMBOL(omap_mcbsp_pollread);
/*
* IRQ based word transmission.
@@ -522,12 +425,15 @@ int omap_mcbsp_pollread(unsigned int id, u16 * buf)
void omap_mcbsp_xmit_word(unsigned int id, u32 word)
{
u32 io_base;
- omap_mcbsp_word_length word_length = mcbsp[id].tx_word_length;
+ omap_mcbsp_word_length word_length;
- if (omap_mcbsp_check(id) < 0)
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return;
+ }
io_base = mcbsp[id].io_base;
+ word_length = mcbsp[id].tx_word_length;
wait_for_completion(&(mcbsp[id].tx_irq_completion));
@@ -535,16 +441,20 @@ void omap_mcbsp_xmit_word(unsigned int id, u32 word)
OMAP_MCBSP_WRITE(io_base, DXR2, word >> 16);
OMAP_MCBSP_WRITE(io_base, DXR1, word & 0xffff);
}
+EXPORT_SYMBOL(omap_mcbsp_xmit_word);
u32 omap_mcbsp_recv_word(unsigned int id)
{
u32 io_base;
u16 word_lsb, word_msb = 0;
- omap_mcbsp_word_length word_length = mcbsp[id].rx_word_length;
+ omap_mcbsp_word_length word_length;
- if (omap_mcbsp_check(id) < 0)
- return -EINVAL;
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+ word_length = mcbsp[id].rx_word_length;
io_base = mcbsp[id].io_base;
wait_for_completion(&(mcbsp[id].rx_irq_completion));
@@ -555,15 +465,24 @@ u32 omap_mcbsp_recv_word(unsigned int id)
return (word_lsb | (word_msb << 16));
}
-
+EXPORT_SYMBOL(omap_mcbsp_recv_word);
int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
{
- u32 io_base = mcbsp[id].io_base;
- omap_mcbsp_word_length tx_word_length = mcbsp[id].tx_word_length;
- omap_mcbsp_word_length rx_word_length = mcbsp[id].rx_word_length;
+ u32 io_base;
+ omap_mcbsp_word_length tx_word_length;
+ omap_mcbsp_word_length rx_word_length;
u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+
+ io_base = mcbsp[id].io_base;
+ tx_word_length = mcbsp[id].tx_word_length;
+ rx_word_length = mcbsp[id].rx_word_length;
+
if (tx_word_length != rx_word_length)
return -EINVAL;
@@ -577,7 +496,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
udelay(10);
OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST);
udelay(10);
- printk("McBSP transmitter not ready\n");
+ dev_err(mcbsp[id].dev, "McBSP%d transmitter not "
+ "ready\n", mcbsp[id].id);
return -EAGAIN;
}
}
@@ -597,7 +517,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
udelay(10);
OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST);
udelay(10);
- printk("McBSP receiver not ready\n");
+ dev_err(mcbsp[id].dev, "McBSP%d receiver not "
+ "ready\n", mcbsp[id].id);
return -EAGAIN;
}
}
@@ -609,14 +530,24 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
return 0;
}
+EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll);
-int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word)
+int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
{
- u32 io_base = mcbsp[id].io_base, clock_word = 0;
- omap_mcbsp_word_length tx_word_length = mcbsp[id].tx_word_length;
- omap_mcbsp_word_length rx_word_length = mcbsp[id].rx_word_length;
+ u32 io_base, clock_word = 0;
+ omap_mcbsp_word_length tx_word_length;
+ omap_mcbsp_word_length rx_word_length;
u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+
+ io_base = mcbsp[id].io_base;
+ tx_word_length = mcbsp[id].tx_word_length;
+ rx_word_length = mcbsp[id].rx_word_length;
+
if (tx_word_length != rx_word_length)
return -EINVAL;
@@ -630,7 +561,8 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word)
udelay(10);
OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST);
udelay(10);
- printk("McBSP transmitter not ready\n");
+ dev_err(mcbsp[id].dev, "McBSP%d transmitter not "
+ "ready\n", mcbsp[id].id);
return -EAGAIN;
}
}
@@ -650,7 +582,8 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word)
udelay(10);
OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST);
udelay(10);
- printk("McBSP receiver not ready\n");
+ dev_err(mcbsp[id].dev, "McBSP%d receiver not "
+ "ready\n", mcbsp[id].id);
return -EAGAIN;
}
}
@@ -664,7 +597,7 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word)
return 0;
}
-
+EXPORT_SYMBOL(omap_mcbsp_spi_master_recv_word_poll);
/*
* Simple DMA based buffer rx/tx routines.
@@ -673,25 +606,32 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word)
* For anything fancier, you should use your own customized DMA
* routines and callbacks.
*/
-int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length)
+int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer,
+ unsigned int length)
{
int dma_tx_ch;
int src_port = 0;
int dest_port = 0;
int sync_dev = 0;
- if (omap_mcbsp_check(id) < 0)
- return -EINVAL;
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
- if (omap_request_dma(mcbsp[id].dma_tx_sync, "McBSP TX", omap_mcbsp_tx_dma_callback,
- &mcbsp[id],
- &dma_tx_ch)) {
- printk("OMAP-McBSP: Unable to request DMA channel for McBSP%d TX. Trying IRQ based TX\n", id+1);
+ if (omap_request_dma(mcbsp[id].dma_tx_sync, "McBSP TX",
+ omap_mcbsp_tx_dma_callback,
+ &mcbsp[id],
+ &dma_tx_ch)) {
+ dev_err(mcbsp[id].dev, " Unable to request DMA channel for "
+ "McBSP%d TX. Trying IRQ based TX\n",
+ mcbsp[id].id);
return -EAGAIN;
}
mcbsp[id].dma_tx_lch = dma_tx_ch;
- DBG("TX DMA on channel %d\n", dma_tx_ch);
+ dev_err(mcbsp[id].dev, "McBSP%d TX DMA on channel %d\n", mcbsp[id].id,
+ dma_tx_ch);
init_completion(&(mcbsp[id].tx_dma_completion));
@@ -699,7 +639,7 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng
src_port = OMAP_DMA_PORT_TIPB;
dest_port = OMAP_DMA_PORT_EMIFF;
}
- if (cpu_is_omap24xx())
+ if (cpu_class_is_omap2())
sync_dev = mcbsp[id].dma_tx_sync;
omap_set_dma_transfer_params(mcbsp[id].dma_tx_lch,
@@ -722,29 +662,37 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng
omap_start_dma(mcbsp[id].dma_tx_lch);
wait_for_completion(&(mcbsp[id].tx_dma_completion));
+
return 0;
}
+EXPORT_SYMBOL(omap_mcbsp_xmit_buffer);
-
-int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length)
+int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer,
+ unsigned int length)
{
int dma_rx_ch;
int src_port = 0;
int dest_port = 0;
int sync_dev = 0;
- if (omap_mcbsp_check(id) < 0)
- return -EINVAL;
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
- if (omap_request_dma(mcbsp[id].dma_rx_sync, "McBSP RX", omap_mcbsp_rx_dma_callback,
- &mcbsp[id],
- &dma_rx_ch)) {
- printk("Unable to request DMA channel for McBSP%d RX. Trying IRQ based RX\n", id+1);
+ if (omap_request_dma(mcbsp[id].dma_rx_sync, "McBSP RX",
+ omap_mcbsp_rx_dma_callback,
+ &mcbsp[id],
+ &dma_rx_ch)) {
+ dev_err(mcbsp[id].dev, "Unable to request DMA channel for "
+ "McBSP%d RX. Trying IRQ based RX\n",
+ mcbsp[id].id);
return -EAGAIN;
}
mcbsp[id].dma_rx_lch = dma_rx_ch;
- DBG("RX DMA on channel %d\n", dma_rx_ch);
+ dev_err(mcbsp[id].dev, "McBSP%d RX DMA on channel %d\n", mcbsp[id].id,
+ dma_rx_ch);
init_completion(&(mcbsp[id].rx_dma_completion));
@@ -752,14 +700,14 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng
src_port = OMAP_DMA_PORT_TIPB;
dest_port = OMAP_DMA_PORT_EMIFF;
}
- if (cpu_is_omap24xx())
+ if (cpu_class_is_omap2())
sync_dev = mcbsp[id].dma_rx_sync;
omap_set_dma_transfer_params(mcbsp[id].dma_rx_lch,
- OMAP_DMA_DATA_TYPE_S16,
- length >> 1, 1,
- OMAP_DMA_SYNC_ELEMENT,
- sync_dev, 0);
+ OMAP_DMA_DATA_TYPE_S16,
+ length >> 1, 1,
+ OMAP_DMA_SYNC_ELEMENT,
+ sync_dev, 0);
omap_set_dma_src_params(mcbsp[id].dma_rx_lch,
src_port,
@@ -768,16 +716,17 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng
0, 0);
omap_set_dma_dest_params(mcbsp[id].dma_rx_lch,
- dest_port,
- OMAP_DMA_AMODE_POST_INC,
- buffer,
- 0, 0);
+ dest_port,
+ OMAP_DMA_AMODE_POST_INC,
+ buffer,
+ 0, 0);
omap_start_dma(mcbsp[id].dma_rx_lch);
wait_for_completion(&(mcbsp[id].rx_dma_completion));
+
return 0;
}
-
+EXPORT_SYMBOL(omap_mcbsp_recv_buffer);
/*
* SPI wrapper.
@@ -785,12 +734,15 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng
* this wrapper just need an omap_mcbsp_spi_cfg structure as an input.
* Once this is done, you can call omap_mcbsp_start().
*/
-void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg)
+void omap_mcbsp_set_spi_mode(unsigned int id,
+ const struct omap_mcbsp_spi_cfg *spi_cfg)
{
struct omap_mcbsp_reg_cfg mcbsp_cfg;
- if (omap_mcbsp_check(id) < 0)
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return;
+ }
memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg));
@@ -798,7 +750,7 @@ void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg *
mcbsp_cfg.rcr1 |= (RWDLEN1(spi_cfg->word_length) | RFRLEN1(0));
mcbsp_cfg.xcr1 |= (XWDLEN1(spi_cfg->word_length) | XFRLEN1(0));
- /* Clock stop mode */
+ /* Clock stop mode */
if (spi_cfg->clk_stp_mode == OMAP_MCBSP_CLK_STP_MODE_NO_DELAY)
mcbsp_cfg.spcr1 |= (1 << 12);
else
@@ -827,13 +779,12 @@ void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg *
if (spi_cfg->spi_mode == OMAP_MCBSP_SPI_MASTER) {
mcbsp_cfg.pcr0 |= CLKXM;
- mcbsp_cfg.srgr1 |= CLKGDV(spi_cfg->clk_div -1);
+ mcbsp_cfg.srgr1 |= CLKGDV(spi_cfg->clk_div - 1);
mcbsp_cfg.pcr0 |= FSXM;
mcbsp_cfg.srgr2 &= ~FSGM;
mcbsp_cfg.xcr2 |= XDATDLY(1);
mcbsp_cfg.rcr2 |= RDATDLY(1);
- }
- else {
+ } else {
mcbsp_cfg.pcr0 &= ~CLKXM;
mcbsp_cfg.srgr1 |= CLKGDV(1);
mcbsp_cfg.pcr0 &= ~FSXM;
@@ -846,199 +797,99 @@ void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg *
omap_mcbsp_config(id, &mcbsp_cfg);
}
-
+EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
/*
* McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
* 730 has only 2 McBSP, and both of them are MPU peripherals.
*/
-struct omap_mcbsp_info {
- u32 virt_base;
- u8 dma_rx_sync, dma_tx_sync;
- u16 rx_irq, tx_irq;
-};
+static int __init omap_mcbsp_probe(struct platform_device *pdev)
+{
+ struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data;
+ int id = pdev->id - 1;
+ int ret = 0;
-#ifdef CONFIG_ARCH_OMAP730
-static const struct omap_mcbsp_info mcbsp_730[] = {
- [0] = { .virt_base = io_p2v(OMAP730_MCBSP1_BASE),
- .dma_rx_sync = OMAP_DMA_MCBSP1_RX,
- .dma_tx_sync = OMAP_DMA_MCBSP1_TX,
- .rx_irq = INT_730_McBSP1RX,
- .tx_irq = INT_730_McBSP1TX },
- [1] = { .virt_base = io_p2v(OMAP730_MCBSP2_BASE),
- .dma_rx_sync = OMAP_DMA_MCBSP3_RX,
- .dma_tx_sync = OMAP_DMA_MCBSP3_TX,
- .rx_irq = INT_730_McBSP2RX,
- .tx_irq = INT_730_McBSP2TX },
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-static const struct omap_mcbsp_info mcbsp_1510[] = {
- [0] = { .virt_base = OMAP1510_MCBSP1_BASE,
- .dma_rx_sync = OMAP_DMA_MCBSP1_RX,
- .dma_tx_sync = OMAP_DMA_MCBSP1_TX,
- .rx_irq = INT_McBSP1RX,
- .tx_irq = INT_McBSP1TX },
- [1] = { .virt_base = io_p2v(OMAP1510_MCBSP2_BASE),
- .dma_rx_sync = OMAP_DMA_MCBSP2_RX,
- .dma_tx_sync = OMAP_DMA_MCBSP2_TX,
- .rx_irq = INT_1510_SPI_RX,
- .tx_irq = INT_1510_SPI_TX },
- [2] = { .virt_base = OMAP1510_MCBSP3_BASE,
- .dma_rx_sync = OMAP_DMA_MCBSP3_RX,
- .dma_tx_sync = OMAP_DMA_MCBSP3_TX,
- .rx_irq = INT_McBSP3RX,
- .tx_irq = INT_McBSP3TX },
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-static const struct omap_mcbsp_info mcbsp_1610[] = {
- [0] = { .virt_base = OMAP1610_MCBSP1_BASE,
- .dma_rx_sync = OMAP_DMA_MCBSP1_RX,
- .dma_tx_sync = OMAP_DMA_MCBSP1_TX,
- .rx_irq = INT_McBSP1RX,
- .tx_irq = INT_McBSP1TX },
- [1] = { .virt_base = io_p2v(OMAP1610_MCBSP2_BASE),
- .dma_rx_sync = OMAP_DMA_MCBSP2_RX,
- .dma_tx_sync = OMAP_DMA_MCBSP2_TX,
- .rx_irq = INT_1610_McBSP2_RX,
- .tx_irq = INT_1610_McBSP2_TX },
- [2] = { .virt_base = OMAP1610_MCBSP3_BASE,
- .dma_rx_sync = OMAP_DMA_MCBSP3_RX,
- .dma_tx_sync = OMAP_DMA_MCBSP3_TX,
- .rx_irq = INT_McBSP3RX,
- .tx_irq = INT_McBSP3TX },
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP24XX)
-static const struct omap_mcbsp_info mcbsp_24xx[] = {
- [0] = { .virt_base = IO_ADDRESS(OMAP24XX_MCBSP1_BASE),
- .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX,
- .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
- .rx_irq = INT_24XX_MCBSP1_IRQ_RX,
- .tx_irq = INT_24XX_MCBSP1_IRQ_TX,
- },
- [1] = { .virt_base = IO_ADDRESS(OMAP24XX_MCBSP2_BASE),
- .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX,
- .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
- .rx_irq = INT_24XX_MCBSP2_IRQ_RX,
- .tx_irq = INT_24XX_MCBSP2_IRQ_TX,
- },
-};
-#endif
+ if (!pdata) {
+ dev_err(&pdev->dev, "McBSP device initialized without"
+ "platform data\n");
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ dev_dbg(&pdev->dev, "Initializing OMAP McBSP (%d).\n", pdev->id);
+
+ if (id >= OMAP_MAX_MCBSP_COUNT) {
+ dev_err(&pdev->dev, "Invalid McBSP device id (%d)\n", id);
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ spin_lock_init(&mcbsp[id].lock);
+ mcbsp[id].id = id + 1;
+ mcbsp[id].free = 1;
+ mcbsp[id].dma_tx_lch = -1;
+ mcbsp[id].dma_rx_lch = -1;
+
+ mcbsp[id].io_base = pdata->virt_base;
+ /* Default I/O is IRQ based */
+ mcbsp[id].io_type = OMAP_MCBSP_IRQ_IO;
+ mcbsp[id].tx_irq = pdata->tx_irq;
+ mcbsp[id].rx_irq = pdata->rx_irq;
+ mcbsp[id].dma_rx_sync = pdata->dma_rx_sync;
+ mcbsp[id].dma_tx_sync = pdata->dma_tx_sync;
+
+ if (pdata->clk_name)
+ mcbsp[id].clk = clk_get(&pdev->dev, pdata->clk_name);
+ if (IS_ERR(mcbsp[id].clk)) {
+ mcbsp[id].free = 0;
+ dev_err(&pdev->dev,
+ "Invalid clock configuration for McBSP%d.\n",
+ mcbsp[id].id);
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ mcbsp[id].pdata = pdata;
+ mcbsp[id].dev = &pdev->dev;
+ platform_set_drvdata(pdev, &mcbsp[id]);
+
+exit:
+ return ret;
+}
-static int __init omap_mcbsp_init(void)
+static int omap_mcbsp_remove(struct platform_device *pdev)
{
- int mcbsp_count = 0, i;
- static const struct omap_mcbsp_info *mcbsp_info;
+ struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
- printk("Initializing OMAP McBSP system\n");
+ platform_set_drvdata(pdev, NULL);
+ if (mcbsp) {
-#ifdef CONFIG_ARCH_OMAP1
- mcbsp_dsp_ck = clk_get(0, "dsp_ck");
- if (IS_ERR(mcbsp_dsp_ck)) {
- printk(KERN_ERR "mcbsp: could not acquire dsp_ck handle.\n");
- return PTR_ERR(mcbsp_dsp_ck);
- }
- mcbsp_api_ck = clk_get(0, "api_ck");
- if (IS_ERR(mcbsp_api_ck)) {
- printk(KERN_ERR "mcbsp: could not acquire api_ck handle.\n");
- return PTR_ERR(mcbsp_api_ck);
- }
- mcbsp_dspxor_ck = clk_get(0, "dspxor_ck");
- if (IS_ERR(mcbsp_dspxor_ck)) {
- printk(KERN_ERR "mcbsp: could not acquire dspxor_ck handle.\n");
- return PTR_ERR(mcbsp_dspxor_ck);
- }
-#endif
-#ifdef CONFIG_ARCH_OMAP2
- mcbsp1_ick = clk_get(0, "mcbsp1_ick");
- if (IS_ERR(mcbsp1_ick)) {
- printk(KERN_ERR "mcbsp: could not acquire mcbsp1_ick handle.\n");
- return PTR_ERR(mcbsp1_ick);
- }
- mcbsp1_fck = clk_get(0, "mcbsp1_fck");
- if (IS_ERR(mcbsp1_fck)) {
- printk(KERN_ERR "mcbsp: could not acquire mcbsp1_fck handle.\n");
- return PTR_ERR(mcbsp1_fck);
- }
- mcbsp2_ick = clk_get(0, "mcbsp2_ick");
- if (IS_ERR(mcbsp2_ick)) {
- printk(KERN_ERR "mcbsp: could not acquire mcbsp2_ick handle.\n");
- return PTR_ERR(mcbsp2_ick);
- }
- mcbsp2_fck = clk_get(0, "mcbsp2_fck");
- if (IS_ERR(mcbsp2_fck)) {
- printk(KERN_ERR "mcbsp: could not acquire mcbsp2_fck handle.\n");
- return PTR_ERR(mcbsp2_fck);
- }
-#endif
+ if (mcbsp->pdata && mcbsp->pdata->ops &&
+ mcbsp->pdata->ops->free)
+ mcbsp->pdata->ops->free(mcbsp->id);
-#ifdef CONFIG_ARCH_OMAP730
- if (cpu_is_omap730()) {
- mcbsp_info = mcbsp_730;
- mcbsp_count = ARRAY_SIZE(mcbsp_730);
- }
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- if (cpu_is_omap15xx()) {
- mcbsp_info = mcbsp_1510;
- mcbsp_count = ARRAY_SIZE(mcbsp_1510);
- }
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
- if (cpu_is_omap16xx()) {
- mcbsp_info = mcbsp_1610;
- mcbsp_count = ARRAY_SIZE(mcbsp_1610);
- }
-#endif
-#if defined(CONFIG_ARCH_OMAP24XX)
- if (cpu_is_omap24xx()) {
- mcbsp_info = mcbsp_24xx;
- mcbsp_count = ARRAY_SIZE(mcbsp_24xx);
- omap2_mcbsp2_mux_setup();
- }
-#endif
- for (i = 0; i < OMAP_MAX_MCBSP_COUNT ; i++) {
- if (i >= mcbsp_count) {
- mcbsp[i].io_base = 0;
- mcbsp[i].free = 0;
- continue;
- }
- mcbsp[i].id = i + 1;
- mcbsp[i].free = 1;
- mcbsp[i].dma_tx_lch = -1;
- mcbsp[i].dma_rx_lch = -1;
-
- mcbsp[i].io_base = mcbsp_info[i].virt_base;
- mcbsp[i].io_type = OMAP_MCBSP_IRQ_IO; /* Default I/O is IRQ based */
- mcbsp[i].tx_irq = mcbsp_info[i].tx_irq;
- mcbsp[i].rx_irq = mcbsp_info[i].rx_irq;
- mcbsp[i].dma_rx_sync = mcbsp_info[i].dma_rx_sync;
- mcbsp[i].dma_tx_sync = mcbsp_info[i].dma_tx_sync;
- spin_lock_init(&mcbsp[i].lock);
+ clk_disable(mcbsp->clk);
+ clk_put(mcbsp->clk);
+
+ mcbsp->clk = NULL;
+ mcbsp->free = 0;
+ mcbsp->dev = NULL;
}
return 0;
}
-arch_initcall(omap_mcbsp_init);
+static struct platform_driver omap_mcbsp_driver = {
+ .probe = omap_mcbsp_probe,
+ .remove = omap_mcbsp_remove,
+ .driver = {
+ .name = "omap-mcbsp",
+ },
+};
+
+int __init omap_mcbsp_init(void)
+{
+ /* Register the McBSP driver */
+ return platform_driver_register(&omap_mcbsp_driver);
+}
-EXPORT_SYMBOL(omap_mcbsp_config);
-EXPORT_SYMBOL(omap_mcbsp_request);
-EXPORT_SYMBOL(omap_mcbsp_set_io_type);
-EXPORT_SYMBOL(omap_mcbsp_free);
-EXPORT_SYMBOL(omap_mcbsp_start);
-EXPORT_SYMBOL(omap_mcbsp_stop);
-EXPORT_SYMBOL(omap_mcbsp_pollread);
-EXPORT_SYMBOL(omap_mcbsp_pollwrite);
-EXPORT_SYMBOL(omap_mcbsp_xmit_word);
-EXPORT_SYMBOL(omap_mcbsp_recv_word);
-EXPORT_SYMBOL(omap_mcbsp_xmit_buffer);
-EXPORT_SYMBOL(omap_mcbsp_recv_buffer);
-EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll);
-EXPORT_SYMBOL(omap_mcbsp_spi_master_recv_word_poll);
-EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 1f23f0459e5f..554ee58e1294 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -10,6 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#undef DEBUG
#include <linux/module.h>
#include <linux/kernel.h>
@@ -24,25 +25,43 @@
#include <asm/arch/sram.h>
#include <asm/arch/board.h>
+#include <asm/arch/control.h>
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+# include "../mach-omap2/prm.h"
+# include "../mach-omap2/cm.h"
+# include "../mach-omap2/sdrc.h"
+#endif
+
#define OMAP1_SRAM_PA 0x20000000
-#define OMAP1_SRAM_VA 0xd0000000
+#define OMAP1_SRAM_VA VMALLOC_END
#define OMAP2_SRAM_PA 0x40200000
#define OMAP2_SRAM_PUB_PA 0x4020f800
-#define OMAP2_SRAM_VA 0xd0000000
-#define OMAP2_SRAM_PUB_VA 0xd0000800
-
-#if defined(CONFIG_ARCH_OMAP24XX)
+#define OMAP2_SRAM_VA VMALLOC_END
+#define OMAP2_SRAM_PUB_VA (VMALLOC_END + 0x800)
+#define OMAP3_SRAM_PA 0x40200000
+#define OMAP3_SRAM_VA 0xd7000000
+#define OMAP3_SRAM_PUB_PA 0x40208000
+#define OMAP3_SRAM_PUB_VA 0xd7008000
+
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#define SRAM_BOOTLOADER_SZ 0x00
#else
#define SRAM_BOOTLOADER_SZ 0x80
#endif
-#define VA_REQINFOPERM0 IO_ADDRESS(0x68005048)
-#define VA_READPERM0 IO_ADDRESS(0x68005050)
-#define VA_WRITEPERM0 IO_ADDRESS(0x68005058)
-#define VA_CONTROL_STAT IO_ADDRESS(0x480002F8)
+#define OMAP24XX_VA_REQINFOPERM0 IO_ADDRESS(0x68005048)
+#define OMAP24XX_VA_READPERM0 IO_ADDRESS(0x68005050)
+#define OMAP24XX_VA_WRITEPERM0 IO_ADDRESS(0x68005058)
+
+#define OMAP34XX_VA_REQINFOPERM0 IO_ADDRESS(0x68012848)
+#define OMAP34XX_VA_READPERM0 IO_ADDRESS(0x68012850)
+#define OMAP34XX_VA_WRITEPERM0 IO_ADDRESS(0x68012858)
+#define OMAP34XX_VA_ADDR_MATCH2 IO_ADDRESS(0x68012880)
+#define OMAP34XX_VA_SMS_RG_ATT0 IO_ADDRESS(0x6C000048)
+#define OMAP34XX_VA_CONTROL_STAT IO_ADDRESS(0x480022F0)
+
#define GP_DEVICE 0x300
-#define TYPE_MASK 0x700
#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
@@ -68,14 +87,21 @@ static int is_sram_locked(void)
int type = 0;
if (cpu_is_omap242x())
- type = __raw_readl(VA_CONTROL_STAT) & TYPE_MASK;
+ type = system_rev & OMAP2_DEVICETYPE_MASK;
if (type == GP_DEVICE) {
/* RAMFW: R/W access to all initiators for all qualifier sets */
if (cpu_is_omap242x()) {
- __raw_writel(0xFF, VA_REQINFOPERM0); /* all q-vects */
- __raw_writel(0xCFDE, VA_READPERM0); /* all i-read */
- __raw_writel(0xCFDE, VA_WRITEPERM0); /* all i-write */
+ __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
+ __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */
+ __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
+ }
+ if (cpu_is_omap34xx()) {
+ __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
+ __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
+ __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
+ __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2);
+ __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
}
return 0;
} else
@@ -92,18 +118,30 @@ void __init omap_detect_sram(void)
{
unsigned long reserved;
- if (cpu_is_omap24xx()) {
+ if (cpu_class_is_omap2()) {
if (is_sram_locked()) {
- omap_sram_base = OMAP2_SRAM_PUB_VA;
- omap_sram_start = OMAP2_SRAM_PUB_PA;
- omap_sram_size = 0x800; /* 2K */
+ if (cpu_is_omap34xx()) {
+ omap_sram_base = OMAP3_SRAM_PUB_VA;
+ omap_sram_start = OMAP3_SRAM_PUB_PA;
+ omap_sram_size = 0x8000; /* 32K */
+ } else {
+ omap_sram_base = OMAP2_SRAM_PUB_VA;
+ omap_sram_start = OMAP2_SRAM_PUB_PA;
+ omap_sram_size = 0x800; /* 2K */
+ }
} else {
- omap_sram_base = OMAP2_SRAM_VA;
- omap_sram_start = OMAP2_SRAM_PA;
- if (cpu_is_omap242x())
- omap_sram_size = 0xa0000; /* 640K */
- else if (cpu_is_omap243x())
+ if (cpu_is_omap34xx()) {
+ omap_sram_base = OMAP3_SRAM_VA;
+ omap_sram_start = OMAP3_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
+ } else {
+ omap_sram_base = OMAP2_SRAM_VA;
+ omap_sram_start = OMAP2_SRAM_PA;
+ if (cpu_is_omap242x())
+ omap_sram_size = 0xa0000; /* 640K */
+ else if (cpu_is_omap243x())
+ omap_sram_size = 0x10000; /* 64K */
+ }
}
} else {
omap_sram_base = OMAP1_SRAM_VA;
@@ -157,6 +195,13 @@ void __init omap_map_sram(void)
omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
}
+ if (cpu_is_omap34xx()) {
+ omap_sram_io_desc[0].virtual = OMAP3_SRAM_VA;
+ base = OMAP3_SRAM_PA;
+ base = ROUND_DOWN(base, PAGE_SIZE);
+ omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+ }
+
omap_sram_io_desc[0].length = 1024 * 1024; /* Use section desc */
iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
@@ -191,6 +236,7 @@ void * omap_sram_push(void * start, unsigned long size)
omap_sram_ceil -= size;
omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, sizeof(void *));
memcpy((void *)omap_sram_ceil, start, size);
+ flush_icache_range((unsigned long)start, (unsigned long)(start + size));
return (void *)omap_sram_ceil;
}
@@ -214,8 +260,9 @@ void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
int __init omap1_sram_init(void)
{
- _omap_sram_reprogram_clock = omap_sram_push(sram_reprogram_clock,
- sram_reprogram_clock_sz);
+ _omap_sram_reprogram_clock =
+ omap_sram_push(omap1_sram_reprogram_clock,
+ omap1_sram_reprogram_clock_sz);
return 0;
}
@@ -224,7 +271,7 @@ int __init omap1_sram_init(void)
#define omap1_sram_init() do {} while (0)
#endif
-#ifdef CONFIG_ARCH_OMAP2
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
u32 base_cs, u32 force_unlock);
@@ -259,19 +306,109 @@ u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2420
+int __init omap242x_sram_init(void)
+{
+ _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
+ omap242x_sram_ddr_init_sz);
+
+ _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
+ omap242x_sram_reprogram_sdrc_sz);
+
+ _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
+ omap242x_sram_set_prcm_sz);
+
+ return 0;
+}
+#else
+static inline int omap242x_sram_init(void)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+int __init omap243x_sram_init(void)
+{
+ _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
+ omap243x_sram_ddr_init_sz);
+
+ _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
+ omap243x_sram_reprogram_sdrc_sz);
+
+ _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
+ omap243x_sram_set_prcm_sz);
+
+ return 0;
+}
+#else
+static inline int omap243x_sram_init(void)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+
+static u32 (*_omap2_sram_reprogram_gpmc)(u32 perf_level);
+u32 omap2_sram_reprogram_gpmc(u32 perf_level)
+{
+ if (!_omap2_sram_reprogram_gpmc)
+ omap_sram_error();
+
+ return _omap2_sram_reprogram_gpmc(perf_level);
+}
+
+static u32 (*_omap2_sram_configure_core_dpll)(u32 m, u32 n,
+ u32 freqsel, u32 m2);
+u32 omap2_sram_configure_core_dpll(u32 m, u32 n, u32 freqsel, u32 m2)
+{
+ if (!_omap2_sram_configure_core_dpll)
+ omap_sram_error();
+
+ return _omap2_sram_configure_core_dpll(m, n, freqsel, m2);
+}
-int __init omap2_sram_init(void)
+/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
+void restore_sram_functions(void)
{
- _omap2_sram_ddr_init = omap_sram_push(sram_ddr_init, sram_ddr_init_sz);
+ omap_sram_ceil = omap_sram_base + omap_sram_size;
- _omap2_sram_reprogram_sdrc = omap_sram_push(sram_reprogram_sdrc,
- sram_reprogram_sdrc_sz);
- _omap2_set_prcm = omap_sram_push(sram_set_prcm, sram_set_prcm_sz);
+ _omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc,
+ omap34xx_sram_reprogram_gpmc_sz);
+
+ _omap2_sram_configure_core_dpll =
+ omap_sram_push(omap34xx_sram_configure_core_dpll,
+ omap34xx_sram_configure_core_dpll_sz);
+}
+
+int __init omap34xx_sram_init(void)
+{
+ _omap2_sram_ddr_init = omap_sram_push(omap34xx_sram_ddr_init,
+ omap34xx_sram_ddr_init_sz);
+
+ _omap2_sram_reprogram_sdrc = omap_sram_push(omap34xx_sram_reprogram_sdrc,
+ omap34xx_sram_reprogram_sdrc_sz);
+
+ _omap2_set_prcm = omap_sram_push(omap34xx_sram_set_prcm,
+ omap34xx_sram_set_prcm_sz);
+
+ _omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc,
+ omap34xx_sram_reprogram_gpmc_sz);
+
+ _omap2_sram_configure_core_dpll =
+ omap_sram_push(omap34xx_sram_configure_core_dpll,
+ omap34xx_sram_configure_core_dpll_sz);
return 0;
}
#else
-#define omap2_sram_init() do {} while (0)
+static inline int omap34xx_sram_init(void)
+{
+ return 0;
+}
#endif
int __init omap_sram_init(void)
@@ -279,10 +416,14 @@ int __init omap_sram_init(void)
omap_detect_sram();
omap_map_sram();
- if (!cpu_is_omap24xx())
+ if (!(cpu_class_is_omap2()))
omap1_sram_init();
- else
- omap2_sram_init();
+ else if (cpu_is_omap242x())
+ omap242x_sram_init();
+ else if (cpu_is_omap2430())
+ omap243x_sram_init();
+ else if (cpu_is_omap34xx())
+ omap34xx_sram_init();
return 0;
}
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index a619475c4b76..2699c16d4da0 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -1,4 +1,4 @@
-/*
+ /*
* arch/arm/plat-omap/usb.c -- platform level USB initialization
*
* Copyright (C) 2004 Texas Instruments, Inc.
@@ -156,8 +156,12 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
if (nwires == 0) {
if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
+ u32 l;
+
/* pulldown D+/D- */
- USB_TRANSCEIVER_CTRL_REG &= ~(3 << 1);
+ l = omap_readl(USB_TRANSCEIVER_CTRL);
+ l &= ~(3 << 1);
+ omap_writel(l, USB_TRANSCEIVER_CTRL);
}
return 0;
}
@@ -171,6 +175,8 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
/* internal transceiver (unavailable on 17xx, 24xx) */
if (!cpu_class_is_omap2() && nwires == 2) {
+ u32 l;
+
// omap_cfg_reg(P9_USB_DP);
// omap_cfg_reg(R8_USB_DM);
@@ -185,9 +191,11 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
* - OTG support on this port not yet written
*/
- USB_TRANSCEIVER_CTRL_REG &= ~(7 << 4);
+ l = omap_readl(USB_TRANSCEIVER_CTRL);
+ l &= ~(7 << 4);
if (!is_device)
- USB_TRANSCEIVER_CTRL_REG |= (3 << 1);
+ l |= (3 << 1);
+ omap_writel(l, USB_TRANSCEIVER_CTRL);
return 3 << 16;
}
@@ -217,8 +225,13 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
* with VBUS switching and overcurrent detection.
*/
- if (cpu_class_is_omap1() && nwires != 6)
- USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB2_UNI_R;
+ if (cpu_class_is_omap1() && nwires != 6) {
+ u32 l;
+
+ l = omap_readl(USB_TRANSCEIVER_CTRL);
+ l &= ~CONF_USB2_UNI_R;
+ omap_writel(l, USB_TRANSCEIVER_CTRL);
+ }
switch (nwires) {
case 3:
@@ -238,9 +251,13 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
omap_cfg_reg(K20_24XX_USB0_VM);
omap2_usb_devconf_set(0, USB_UNIDIR);
} else {
+ u32 l;
+
omap_cfg_reg(AA9_USB0_VP);
omap_cfg_reg(R9_USB0_VM);
- USB_TRANSCEIVER_CTRL_REG |= CONF_USB2_UNI_R;
+ l = omap_readl(USB_TRANSCEIVER_CTRL);
+ l |= CONF_USB2_UNI_R;
+ omap_writel(l, USB_TRANSCEIVER_CTRL);
}
break;
default:
@@ -254,8 +271,13 @@ static u32 __init omap_usb1_init(unsigned nwires)
{
u32 syscon1 = 0;
- if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6)
- USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB1_UNI_R;
+ if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) {
+ u32 l;
+
+ l = omap_readl(USB_TRANSCEIVER_CTRL);
+ l &= ~CONF_USB1_UNI_R;
+ omap_writel(l, USB_TRANSCEIVER_CTRL);
+ }
if (cpu_is_omap24xx())
omap2_usb_devconf_clear(1, USB_BIDIR_TLL);
@@ -316,8 +338,13 @@ static u32 __init omap_usb1_init(unsigned nwires)
syscon1 = 3;
omap_cfg_reg(USB1_VP);
omap_cfg_reg(USB1_VM);
- if (!cpu_is_omap15xx())
- USB_TRANSCEIVER_CTRL_REG |= CONF_USB1_UNI_R;
+ if (!cpu_is_omap15xx()) {
+ u32 l;
+
+ l = omap_readl(USB_TRANSCEIVER_CTRL);
+ l |= CONF_USB1_UNI_R;
+ omap_writel(l, USB_TRANSCEIVER_CTRL);
+ }
break;
default:
bad:
@@ -340,8 +367,13 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
if (alt_pingroup || nwires == 0)
return 0;
- if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6)
- USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB2_UNI_R;
+ if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) {
+ u32 l;
+
+ l = omap_readl(USB_TRANSCEIVER_CTRL);
+ l &= ~CONF_USB2_UNI_R;
+ omap_writel(l, USB_TRANSCEIVER_CTRL);
+ }
/* external transceiver */
if (cpu_is_omap15xx()) {
@@ -410,9 +442,13 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
omap_cfg_reg(USB2_VP);
omap_cfg_reg(USB2_VM);
} else {
+ u32 l;
+
omap_cfg_reg(AA9_USB2_VP);
omap_cfg_reg(R9_USB2_VM);
- USB_TRANSCEIVER_CTRL_REG |= CONF_USB2_UNI_R;
+ l = omap_readl(USB_TRANSCEIVER_CTRL);
+ l |= CONF_USB2_UNI_R;
+ omap_writel(l, USB_TRANSCEIVER_CTRL);
}
break;
default:
@@ -531,10 +567,6 @@ static struct platform_device otg_device = {
/*-------------------------------------------------------------------------*/
-#define ULPD_CLOCK_CTRL_REG __REG16(ULPD_CLOCK_CTRL)
-#define ULPD_SOFT_REQ_REG __REG16(ULPD_SOFT_REQ)
-
-
// FIXME correct answer depends on hmc_mode,
// as does (on omap1) any nonzero value for config->otg port number
#ifdef CONFIG_USB_GADGET_OMAP
@@ -550,17 +582,17 @@ static struct platform_device otg_device = {
void __init
omap_otg_init(struct omap_usb_config *config)
{
- u32 syscon = OTG_SYSCON_1_REG & 0xffff;
+ u32 syscon;
int status;
int alt_pingroup = 0;
/* NOTE: no bus or clock setup (yet?) */
- syscon = OTG_SYSCON_1_REG & 0xffff;
+ syscon = omap_readl(OTG_SYSCON_1) & 0xffff;
if (!(syscon & OTG_RESET_DONE))
pr_debug("USB resets not complete?\n");
- // OTG_IRQ_EN_REG = 0;
+ //omap_writew(0, OTG_IRQ_EN);
/* pin muxing and transceiver pinouts */
if (config->pins[0] > 2) /* alt pingroup 2 */
@@ -568,8 +600,8 @@ omap_otg_init(struct omap_usb_config *config)
syscon |= omap_usb0_init(config->pins[0], is_usb0_device(config));
syscon |= omap_usb1_init(config->pins[1]);
syscon |= omap_usb2_init(config->pins[2], alt_pingroup);
- pr_debug("OTG_SYSCON_1_REG = %08x\n", syscon);
- OTG_SYSCON_1_REG = syscon;
+ pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
+ omap_writel(syscon, OTG_SYSCON_1);
syscon = config->hmc_mode;
syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */;
@@ -578,9 +610,10 @@ omap_otg_init(struct omap_usb_config *config)
syscon |= OTG_EN;
#endif
if (cpu_class_is_omap1())
- pr_debug("USB_TRANSCEIVER_CTRL_REG = %03x\n", USB_TRANSCEIVER_CTRL_REG);
- pr_debug("OTG_SYSCON_2_REG = %08x\n", syscon);
- OTG_SYSCON_2_REG = syscon;
+ pr_debug("USB_TRANSCEIVER_CTRL = %03x\n",
+ omap_readl(USB_TRANSCEIVER_CTRL));
+ pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2));
+ omap_writel(syscon, OTG_SYSCON_2);
printk("USB: hmc %d", config->hmc_mode);
if (!alt_pingroup)
@@ -597,12 +630,19 @@ omap_otg_init(struct omap_usb_config *config)
printk("\n");
if (cpu_class_is_omap1()) {
+ u16 w;
+
/* leave USB clocks/controllers off until needed */
- ULPD_SOFT_REQ_REG &= ~SOFT_USB_CLK_REQ;
- ULPD_CLOCK_CTRL_REG &= ~USB_MCLK_EN;
- ULPD_CLOCK_CTRL_REG |= DIS_USB_PVCI_CLK;
+ w = omap_readw(ULPD_SOFT_REQ);
+ w &= ~SOFT_USB_CLK_REQ;
+ omap_writew(w, ULPD_SOFT_REQ);
+
+ w = omap_readw(ULPD_CLOCK_CTRL);
+ w &= ~USB_MCLK_EN;
+ w |= DIS_USB_PVCI_CLK;
+ omap_writew(w, ULPD_CLOCK_CTRL);
}
- syscon = OTG_SYSCON_1_REG;
+ syscon = omap_readl(OTG_SYSCON_1);
syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
#ifdef CONFIG_USB_GADGET_OMAP
@@ -639,8 +679,8 @@ omap_otg_init(struct omap_usb_config *config)
pr_debug("can't register OTG device, %d\n", status);
}
#endif
- pr_debug("OTG_SYSCON_1_REG = %08x\n", syscon);
- OTG_SYSCON_1_REG = syscon;
+ pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
+ omap_writel(syscon, OTG_SYSCON_1);
status = 0;
}
@@ -653,18 +693,19 @@ static inline void omap_otg_init(struct omap_usb_config *config) {}
#ifdef CONFIG_ARCH_OMAP15XX
-#define ULPD_DPLL_CTRL_REG __REG16(ULPD_DPLL_CTRL)
+/* ULPD_DPLL_CTRL */
#define DPLL_IOB (1 << 13)
#define DPLL_PLL_ENABLE (1 << 4)
#define DPLL_LOCK (1 << 0)
-#define ULPD_APLL_CTRL_REG __REG16(ULPD_APLL_CTRL)
+/* ULPD_APLL_CTRL */
#define APLL_NDPLL_SWITCH (1 << 0)
static void __init omap_1510_usb_init(struct omap_usb_config *config)
{
unsigned int val;
+ u16 w;
omap_usb0_init(config->pins[0], is_usb0_device(config));
omap_usb1_init(config->pins[1]);
@@ -685,12 +726,22 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
printk("\n");
/* use DPLL for 48 MHz function clock */
- pr_debug("APLL %04x DPLL %04x REQ %04x\n", ULPD_APLL_CTRL_REG,
- ULPD_DPLL_CTRL_REG, ULPD_SOFT_REQ_REG);
- ULPD_APLL_CTRL_REG &= ~APLL_NDPLL_SWITCH;
- ULPD_DPLL_CTRL_REG |= DPLL_IOB | DPLL_PLL_ENABLE;
- ULPD_SOFT_REQ_REG |= SOFT_UDC_REQ | SOFT_DPLL_REQ;
- while (!(ULPD_DPLL_CTRL_REG & DPLL_LOCK))
+ pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL),
+ omap_readw(ULPD_DPLL_CTRL), omap_readw(ULPD_SOFT_REQ));
+
+ w = omap_readw(ULPD_APLL_CTRL);
+ w &= ~APLL_NDPLL_SWITCH;
+ omap_writew(w, ULPD_APLL_CTRL);
+
+ w = omap_readw(ULPD_DPLL_CTRL);
+ w |= DPLL_IOB | DPLL_PLL_ENABLE;
+ omap_writew(w, ULPD_DPLL_CTRL);
+
+ w = omap_readw(ULPD_SOFT_REQ);
+ w |= SOFT_UDC_REQ | SOFT_DPLL_REQ;
+ omap_writew(w, ULPD_SOFT_REQ);
+
+ while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK))
cpu_relax();
#ifdef CONFIG_USB_GADGET_OMAP
diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c
index c5b669d234bc..fe66a1835169 100644
--- a/arch/arm/plat-orion/irq.c
+++ b/arch/arm/plat-orion/irq.c
@@ -36,8 +36,8 @@ static void orion_irq_unmask(u32 irq)
static struct irq_chip orion_irq_chip = {
.name = "orion_irq",
- .ack = orion_irq_mask,
.mask = orion_irq_mask,
+ .mask_ack = orion_irq_mask,
.unmask = orion_irq_unmask,
};
@@ -59,6 +59,7 @@ void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
set_irq_chip(irq, &orion_irq_chip);
set_irq_chip_data(irq, maskaddr);
set_irq_handler(irq, handle_level_irq);
+ irq_desc[irq].status |= IRQ_LEVEL;
set_irq_flags(irq, IRQF_VALID);
}
}
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index abfda53f1800..ca32c60e14d7 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -39,6 +39,7 @@
#define PCIE_CONF_DATA_OFF 0x18fc
#define PCIE_MASK_OFF 0x1910
#define PCIE_CTRL_OFF 0x1a00
+#define PCIE_CTRL_X1_MODE 0x0001
#define PCIE_STAT_OFF 0x1a04
#define PCIE_STAT_DEV_OFFS 20
#define PCIE_STAT_DEV_MASK 0x1f
@@ -62,6 +63,11 @@ int orion_pcie_link_up(void __iomem *base)
return !(readl(base + PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
}
+int __init orion_pcie_x4_mode(void __iomem *base)
+{
+ return !(readl(base + PCIE_CTRL_OFF) & PCIE_CTRL_X1_MODE);
+}
+
int orion_pcie_get_local_bus_nr(void __iomem *base)
{
u32 stat = readl(base + PCIE_STAT_OFF);
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 28b5285446e8..93c4ef9f0067 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -74,7 +74,7 @@ orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev)
/*
* Clear and enable clockevent timer interrupt.
*/
- writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE);
+ writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE);
u = readl(BRIDGE_MASK);
u |= BRIDGE_INT_TIMER1;
@@ -138,7 +138,7 @@ orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
/*
* ACK pending timer interrupt.
*/
- writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE);
+ writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE);
}
local_irq_restore(flags);
@@ -159,7 +159,7 @@ static irqreturn_t orion_timer_interrupt(int irq, void *dev_id)
/*
* ACK timer interrupt and call event handler.
*/
- writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE);
+ writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE);
orion_clkevt.event_handler(&orion_clkevt);
return IRQ_HANDLED;
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index b66fb3c4e228..5e28c217b8c2 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -9,6 +9,7 @@ config PLAT_S3C24XX
depends on ARCH_S3C2410
default y if ARCH_S3C2410
select NO_IOPORT
+ select HAVE_GPIO_LIB
help
Base platform code for any Samsung S3C24XX device
@@ -20,6 +21,13 @@ config CPU_S3C244X
help
Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
+config S3C24XX_PWM
+ bool "PWM device support"
+ select HAVE_PWM
+ help
+ Support for exporting the PWM timer blocks via the pwm device
+ system.
+
config PM_SIMTEC
bool
help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 131d20237dd7..d82767b2b833 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -16,8 +16,10 @@ obj-y += cpu.o
obj-y += irq.o
obj-y += devs.o
obj-y += gpio.o
+obj-y += gpiolib.o
obj-y += time.o
obj-y += clock.o
+obj-y += pwm-clock.o
# Architecture dependant builds
@@ -27,5 +29,6 @@ obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += sleep.o
+obj-$(CONFIG_HAVE_PWM) += pwm.o
obj-$(CONFIG_S3C2410_DMA) += dma.o
obj-$(CONFIG_MACH_SMDK) += common-smdk.o
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index e546e933b3f7..eea3b32ff798 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -495,106 +495,6 @@ struct platform_device s3c_device_spi1 = {
EXPORT_SYMBOL(s3c_device_spi1);
-/* pwm timer blocks */
-
-static struct resource s3c_timer0_resource[] = {
- [0] = {
- .start = S3C24XX_PA_TIMER + 0x0C,
- .end = S3C24XX_PA_TIMER + 0x0C + 0xB,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_TIMER0,
- .end = IRQ_TIMER0,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-struct platform_device s3c_device_timer0 = {
- .name = "s3c2410-timer",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c_timer0_resource),
- .resource = s3c_timer0_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_timer0);
-
-/* timer 1 */
-
-static struct resource s3c_timer1_resource[] = {
- [0] = {
- .start = S3C24XX_PA_TIMER + 0x18,
- .end = S3C24XX_PA_TIMER + 0x23,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_TIMER1,
- .end = IRQ_TIMER1,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-struct platform_device s3c_device_timer1 = {
- .name = "s3c2410-timer",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c_timer1_resource),
- .resource = s3c_timer1_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_timer1);
-
-/* timer 2 */
-
-static struct resource s3c_timer2_resource[] = {
- [0] = {
- .start = S3C24XX_PA_TIMER + 0x24,
- .end = S3C24XX_PA_TIMER + 0x2F,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_TIMER2,
- .end = IRQ_TIMER2,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-struct platform_device s3c_device_timer2 = {
- .name = "s3c2410-timer",
- .id = 2,
- .num_resources = ARRAY_SIZE(s3c_timer2_resource),
- .resource = s3c_timer2_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_timer2);
-
-/* timer 3 */
-
-static struct resource s3c_timer3_resource[] = {
- [0] = {
- .start = S3C24XX_PA_TIMER + 0x30,
- .end = S3C24XX_PA_TIMER + 0x3B,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_TIMER3,
- .end = IRQ_TIMER3,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-struct platform_device s3c_device_timer3 = {
- .name = "s3c2410-timer",
- .id = 3,
- .num_resources = ARRAY_SIZE(s3c_timer3_resource),
- .resource = s3c_timer3_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_timer3);
-
#ifdef CONFIG_CPU_S3C2440
/* Camif Controller */
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
new file mode 100644
index 000000000000..825d8d0c5ca2
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -0,0 +1,259 @@
+/* linux/arch/arm/plat-s3c24xx/gpiolib.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/arch/regs-gpio.h>
+
+struct s3c24xx_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *base;
+};
+
+static inline struct s3c24xx_gpio_chip *to_s3c_chip(struct gpio_chip *gpc)
+{
+ return container_of(gpc, struct s3c24xx_gpio_chip, chip);
+}
+
+/* these routines are exported for use by other parts of the platform
+ * and system support, but are not intended to be used directly by the
+ * drivers themsevles.
+ */
+
+int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long flags;
+ unsigned long con;
+
+ local_irq_save(flags);
+
+ con = __raw_readl(base + 0x00);
+ con &= ~(3 << (offset * 2));
+ con |= (S3C2410_GPIO_OUTPUT & 0xf) << (offset * 2);
+
+ __raw_writel(con, base + 0x00);
+
+ local_irq_restore(flags);
+ return 0;
+}
+
+int s3c24xx_gpiolib_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long flags;
+ unsigned long dat;
+ unsigned long con;
+
+ local_irq_save(flags);
+
+ dat = __raw_readl(base + 0x04);
+ dat &= ~(1 << offset);
+ if (value)
+ dat |= 1 << offset;
+ __raw_writel(dat, base + 0x04);
+
+ con = __raw_readl(base + 0x00);
+ con &= ~(3 << (offset * 2));
+ con |= (S3C2410_GPIO_OUTPUT & 0xf) << (offset * 2);
+
+ __raw_writel(con, base + 0x00);
+ __raw_writel(dat, base + 0x04);
+
+ local_irq_restore(flags);
+ return 0;
+}
+
+void s3c24xx_gpiolib_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long flags;
+ unsigned long dat;
+
+ local_irq_save(flags);
+
+ dat = __raw_readl(base + 0x04);
+ dat &= ~(1 << offset);
+ if (value)
+ dat |= 1 << offset;
+ __raw_writel(dat, base + 0x04);
+
+ local_irq_restore(flags);
+}
+
+int s3c24xx_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
+ unsigned long val;
+
+ val = __raw_readl(ourchip->base + 0x04);
+ val >>= offset;
+ val &= 1;
+
+ return val;
+}
+
+static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
+{
+ return -EINVAL;
+}
+
+static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long flags;
+ unsigned long dat;
+ unsigned long con;
+
+ local_irq_save(flags);
+
+ con = __raw_readl(base + 0x00);
+ dat = __raw_readl(base + 0x04);
+
+ dat &= ~(1 << offset);
+ if (value)
+ dat |= 1 << offset;
+
+ __raw_writel(dat, base + 0x04);
+
+ con &= ~(1 << offset);
+
+ __raw_writel(con, base + 0x00);
+ __raw_writel(dat, base + 0x04);
+
+ local_irq_restore(flags);
+ return 0;
+}
+
+
+struct s3c24xx_gpio_chip gpios[] = {
+ [0] = {
+ .base = S3C24XX_GPIO_BASE(S3C2410_GPA0),
+ .chip = {
+ .base = S3C2410_GPA0,
+ .owner = THIS_MODULE,
+ .label = "GPIOA",
+ .ngpio = 24,
+ .direction_input = s3c24xx_gpiolib_banka_input,
+ .direction_output = s3c24xx_gpiolib_banka_output,
+ .set = s3c24xx_gpiolib_set,
+ .get = s3c24xx_gpiolib_get,
+ },
+ },
+ [1] = {
+ .base = S3C24XX_GPIO_BASE(S3C2410_GPB0),
+ .chip = {
+ .base = S3C2410_GPB0,
+ .owner = THIS_MODULE,
+ .label = "GPIOB",
+ .ngpio = 16,
+ .direction_input = s3c24xx_gpiolib_input,
+ .direction_output = s3c24xx_gpiolib_output,
+ .set = s3c24xx_gpiolib_set,
+ .get = s3c24xx_gpiolib_get,
+ },
+ },
+ [2] = {
+ .base = S3C24XX_GPIO_BASE(S3C2410_GPC0),
+ .chip = {
+ .base = S3C2410_GPC0,
+ .owner = THIS_MODULE,
+ .label = "GPIOC",
+ .ngpio = 16,
+ .direction_input = s3c24xx_gpiolib_input,
+ .direction_output = s3c24xx_gpiolib_output,
+ .set = s3c24xx_gpiolib_set,
+ .get = s3c24xx_gpiolib_get,
+ },
+ },
+ [3] = {
+ .base = S3C24XX_GPIO_BASE(S3C2410_GPD0),
+ .chip = {
+ .base = S3C2410_GPD0,
+ .owner = THIS_MODULE,
+ .label = "GPIOD",
+ .ngpio = 16,
+ .direction_input = s3c24xx_gpiolib_input,
+ .direction_output = s3c24xx_gpiolib_output,
+ .set = s3c24xx_gpiolib_set,
+ .get = s3c24xx_gpiolib_get,
+ },
+ },
+ [4] = {
+ .base = S3C24XX_GPIO_BASE(S3C2410_GPE0),
+ .chip = {
+ .base = S3C2410_GPE0,
+ .label = "GPIOE",
+ .owner = THIS_MODULE,
+ .ngpio = 16,
+ .direction_input = s3c24xx_gpiolib_input,
+ .direction_output = s3c24xx_gpiolib_output,
+ .set = s3c24xx_gpiolib_set,
+ .get = s3c24xx_gpiolib_get,
+ },
+ },
+ [5] = {
+ .base = S3C24XX_GPIO_BASE(S3C2410_GPF0),
+ .chip = {
+ .base = S3C2410_GPF0,
+ .owner = THIS_MODULE,
+ .label = "GPIOF",
+ .ngpio = 8,
+ .direction_input = s3c24xx_gpiolib_input,
+ .direction_output = s3c24xx_gpiolib_output,
+ .set = s3c24xx_gpiolib_set,
+ .get = s3c24xx_gpiolib_get,
+ },
+ },
+ [6] = {
+ .base = S3C24XX_GPIO_BASE(S3C2410_GPG0),
+ .chip = {
+ .base = S3C2410_GPG0,
+ .owner = THIS_MODULE,
+ .label = "GPIOG",
+ .ngpio = 10,
+ .direction_input = s3c24xx_gpiolib_input,
+ .direction_output = s3c24xx_gpiolib_output,
+ .set = s3c24xx_gpiolib_set,
+ .get = s3c24xx_gpiolib_get,
+ },
+ },
+};
+
+static __init int s3c24xx_gpiolib_init(void)
+{
+ struct s3c24xx_gpio_chip *chip = gpios;
+ int gpn;
+
+ for (gpn = 0; gpn < ARRAY_SIZE(gpios); gpn++, chip++)
+ gpiochip_add(&chip->chip);
+
+ return 0;
+}
+
+arch_initcall(s3c24xx_gpiolib_init);
diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c
new file mode 100644
index 000000000000..2cda3e3c6786
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/pwm-clock.c
@@ -0,0 +1,437 @@
+/* linux/arch/arm/plat-s3c24xx/pwm-clock.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Copyright (c) 2007, 2008 Ben Dooks
+ * Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+#include <asm/plat-s3c/regs-timer.h>
+
+/* Each of the timers 0 through 5 go through the following
+ * clock tree, with the inputs depending on the timers.
+ *
+ * pclk ---- [ prescaler 0 ] -+---> timer 0
+ * +---> timer 1
+ *
+ * pclk ---- [ prescaler 1 ] -+---> timer 2
+ * +---> timer 3
+ * \---> timer 4
+ *
+ * Which are fed into the timers as so:
+ *
+ * prescaled 0 ---- [ div 2,4,8,16 ] ---\
+ * [mux] -> timer 0
+ * tclk 0 ------------------------------/
+ *
+ * prescaled 0 ---- [ div 2,4,8,16 ] ---\
+ * [mux] -> timer 1
+ * tclk 0 ------------------------------/
+ *
+ *
+ * prescaled 1 ---- [ div 2,4,8,16 ] ---\
+ * [mux] -> timer 2
+ * tclk 1 ------------------------------/
+ *
+ * prescaled 1 ---- [ div 2,4,8,16 ] ---\
+ * [mux] -> timer 3
+ * tclk 1 ------------------------------/
+ *
+ * prescaled 1 ---- [ div 2,4,8, 16 ] --\
+ * [mux] -> timer 4
+ * tclk 1 ------------------------------/
+ *
+ * Since the mux and the divider are tied together in the
+ * same register space, it is impossible to set the parent
+ * and the rate at the same time. To avoid this, we add an
+ * intermediate 'prescaled-and-divided' clock to select
+ * as the parent for the timer input clock called tdiv.
+ *
+ * prescaled clk --> pwm-tdiv ---\
+ * [ mux ] --> timer X
+ * tclk -------------------------/
+*/
+
+static unsigned long clk_pwm_scaler_getrate(struct clk *clk)
+{
+ unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0);
+
+ if (clk->id == 1) {
+ tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK;
+ tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT;
+ } else {
+ tcfg0 &= S3C2410_TCFG_PRESCALER0_MASK;
+ }
+
+ return clk_get_rate(clk->parent) / (tcfg0 + 1);
+}
+
+/* TODO - add set rate calls. */
+
+struct clk clk_timer_scaler[] = {
+ [0] = {
+ .name = "pwm-scaler0",
+ .id = -1,
+ .get_rate = clk_pwm_scaler_getrate,
+ },
+ [1] = {
+ .name = "pwm-scaler1",
+ .id = -1,
+ .get_rate = clk_pwm_scaler_getrate,
+ },
+};
+
+struct clk clk_timer_tclk[] = {
+ [0] = {
+ .name = "pwm-tclk0",
+ .id = -1,
+ },
+ [1] = {
+ .name = "pwm-tclk1",
+ .id = -1,
+ },
+};
+
+struct pwm_tdiv_clk {
+ struct clk clk;
+ unsigned int divisor;
+};
+
+static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk)
+{
+ return container_of(clk, struct pwm_tdiv_clk, clk);
+}
+
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+ return 1 << (1 + tcfg1);
+}
+
+static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk)
+{
+ unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+ unsigned int divisor;
+
+ tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
+ tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+ if (tcfg1 == S3C2410_TCFG1_MUX_TCLK)
+ divisor = to_tdiv(clk)->divisor;
+ else
+ divisor = tcfg_to_divisor(tcfg1);
+
+ return clk_get_rate(clk->parent) / divisor;
+}
+
+static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent_rate;
+ unsigned long divisor;
+
+ parent_rate = clk_get_rate(clk->parent);
+ divisor = parent_rate / rate;
+
+ if (divisor <= 2)
+ divisor = 2;
+ else if (divisor <= 4)
+ divisor = 4;
+ else if (divisor <= 8)
+ divisor = 8;
+ else
+ divisor = 16;
+
+ return parent_rate / divisor;
+}
+
+static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk)
+{
+ unsigned long bits;
+
+ switch (divclk->divisor) {
+ case 2:
+ bits = S3C2410_TCFG1_MUX_DIV2;
+ break;
+ case 4:
+ bits = S3C2410_TCFG1_MUX_DIV4;
+ break;
+ case 8:
+ bits = S3C2410_TCFG1_MUX_DIV8;
+ break;
+ case 16:
+ default:
+ bits = S3C2410_TCFG1_MUX_DIV16;
+ break;
+ }
+
+ return bits;
+}
+
+static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk)
+{
+ unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+ unsigned long bits = clk_pwm_tdiv_bits(divclk);
+ unsigned long flags;
+ unsigned long shift = S3C2410_TCFG1_SHIFT(divclk->clk.id);
+
+ local_irq_save(flags);
+
+ tcfg1 = __raw_readl(S3C2410_TCFG1);
+ tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
+ tcfg1 |= bits << shift;
+ __raw_writel(tcfg1, S3C2410_TCFG1);
+
+ local_irq_restore(flags);
+}
+
+static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
+{
+ struct pwm_tdiv_clk *divclk = to_tdiv(clk);
+ unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long divisor;
+
+ tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
+ tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+ rate = clk_round_rate(clk, rate);
+ divisor = parent_rate / rate;
+
+ if (divisor > 16)
+ return -EINVAL;
+
+ divclk->divisor = divisor;
+
+ /* Update the current MUX settings if we are currently
+ * selected as the clock source for this clock. */
+
+ if (tcfg1 != S3C2410_TCFG1_MUX_TCLK)
+ clk_pwm_tdiv_update(divclk);
+
+ return 0;
+}
+
+struct pwm_tdiv_clk clk_timer_tdiv[] = {
+ [0] = {
+ .clk = {
+ .name = "pwm-tdiv",
+ .parent = &clk_timer_scaler[0],
+ .get_rate = clk_pwm_tdiv_get_rate,
+ .set_rate = clk_pwm_tdiv_set_rate,
+ .round_rate = clk_pwm_tdiv_round_rate,
+ },
+ },
+ [1] = {
+ .clk = {
+ .name = "pwm-tdiv",
+ .parent = &clk_timer_scaler[0],
+ .get_rate = clk_pwm_tdiv_get_rate,
+ .set_rate = clk_pwm_tdiv_set_rate,
+ .round_rate = clk_pwm_tdiv_round_rate,
+ }
+ },
+ [2] = {
+ .clk = {
+ .name = "pwm-tdiv",
+ .parent = &clk_timer_scaler[1],
+ .get_rate = clk_pwm_tdiv_get_rate,
+ .set_rate = clk_pwm_tdiv_set_rate,
+ .round_rate = clk_pwm_tdiv_round_rate,
+ },
+ },
+ [3] = {
+ .clk = {
+ .name = "pwm-tdiv",
+ .parent = &clk_timer_scaler[1],
+ .get_rate = clk_pwm_tdiv_get_rate,
+ .set_rate = clk_pwm_tdiv_set_rate,
+ .round_rate = clk_pwm_tdiv_round_rate,
+ },
+ },
+ [4] = {
+ .clk = {
+ .name = "pwm-tdiv",
+ .parent = &clk_timer_scaler[1],
+ .get_rate = clk_pwm_tdiv_get_rate,
+ .set_rate = clk_pwm_tdiv_set_rate,
+ .round_rate = clk_pwm_tdiv_round_rate,
+ },
+ },
+};
+
+static int __init clk_pwm_tdiv_register(unsigned int id)
+{
+ struct pwm_tdiv_clk *divclk = &clk_timer_tdiv[id];
+ unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+
+ tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
+ tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+ divclk->clk.id = id;
+ divclk->divisor = tcfg_to_divisor(tcfg1);
+
+ return s3c24xx_register_clock(&divclk->clk);
+}
+
+static inline struct clk *s3c24xx_pwmclk_tclk(unsigned int id)
+{
+ return (id >= 2) ? &clk_timer_tclk[1] : &clk_timer_tclk[0];
+}
+
+static inline struct clk *s3c24xx_pwmclk_tdiv(unsigned int id)
+{
+ return &clk_timer_tdiv[id].clk;
+}
+
+static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
+{
+ unsigned int id = clk->id;
+ unsigned long tcfg1;
+ unsigned long flags;
+ unsigned long bits;
+ unsigned long shift = S3C2410_TCFG1_SHIFT(id);
+
+ if (parent == s3c24xx_pwmclk_tclk(id))
+ bits = S3C2410_TCFG1_MUX_TCLK << shift;
+ else if (parent == s3c24xx_pwmclk_tdiv(id))
+ bits = clk_pwm_tdiv_bits(to_tdiv(clk)) << shift;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ local_irq_save(flags);
+
+ tcfg1 = __raw_readl(S3C2410_TCFG1);
+ tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
+ __raw_writel(tcfg1 | bits, S3C2410_TCFG1);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static struct clk clk_tin[] = {
+ [0] = {
+ .name = "pwm-tin",
+ .id = 0,
+ .set_parent = clk_pwm_tin_set_parent,
+ },
+ [1] = {
+ .name = "pwm-tin",
+ .id = 1,
+ .set_parent = clk_pwm_tin_set_parent,
+ },
+ [2] = {
+ .name = "pwm-tin",
+ .id = 2,
+ .set_parent = clk_pwm_tin_set_parent,
+ },
+ [3] = {
+ .name = "pwm-tin",
+ .id = 3,
+ .set_parent = clk_pwm_tin_set_parent,
+ },
+ [4] = {
+ .name = "pwm-tin",
+ .id = 4,
+ .set_parent = clk_pwm_tin_set_parent,
+ },
+};
+
+static __init int clk_pwm_tin_register(struct clk *pwm)
+{
+ unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+ unsigned int id = pwm->id;
+
+ struct clk *parent;
+ int ret;
+
+ ret = s3c24xx_register_clock(pwm);
+ if (ret < 0)
+ return ret;
+
+ tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
+ tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+ if (tcfg1 == S3C2410_TCFG1_MUX_TCLK)
+ parent = s3c24xx_pwmclk_tclk(id);
+ else
+ parent = s3c24xx_pwmclk_tdiv(id);
+
+ return clk_set_parent(pwm, parent);
+}
+
+static __init int s3c24xx_pwmclk_init(void)
+{
+ struct clk *clk_timers;
+ unsigned int clk;
+ int ret;
+
+ clk_timers = clk_get(NULL, "timers");
+ if (IS_ERR(clk_timers)) {
+ printk(KERN_ERR "%s: no parent clock\n", __func__);
+ return -EINVAL;
+ }
+
+ for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) {
+ clk_timer_scaler[clk].parent = clk_timers;
+ ret = s3c24xx_register_clock(&clk_timer_scaler[clk]);
+ if (ret < 0) {
+ printk(KERN_ERR "error adding pwm scaler%d clock\n", clk);
+ goto err;
+ }
+ }
+
+ for (clk = 0; clk < ARRAY_SIZE(clk_timer_tclk); clk++) {
+ ret = s3c24xx_register_clock(&clk_timer_tclk[clk]);
+ if (ret < 0) {
+ printk(KERN_ERR "error adding pww tclk%d\n", clk);
+ goto err;
+ }
+ }
+
+ for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) {
+ ret = clk_pwm_tdiv_register(clk);
+ if (ret < 0) {
+ printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk);
+ goto err;
+ }
+ }
+
+ for (clk = 0; clk < ARRAY_SIZE(clk_tin); clk++) {
+ ret = clk_pwm_tin_register(&clk_tin[clk]);
+ if (ret < 0) {
+ printk(KERN_ERR "error adding pwm%d tin clock\n", clk);
+ goto err;
+ }
+ }
+
+ return 0;
+
+ err:
+ return ret;
+}
+
+arch_initcall(s3c24xx_pwmclk_init);
diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c
new file mode 100644
index 000000000000..18c4bdc49a05
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/pwm.c
@@ -0,0 +1,402 @@
+/* arch/arm/plat-s3c24xx/pwm.c
+ *
+ * Copyright (c) 2007 Ben Dooks
+ * Copyright (c) 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
+ *
+ * S3C24XX PWM device core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <asm/plat-s3c/regs-timer.h>
+
+struct pwm_device {
+ struct list_head list;
+ struct platform_device *pdev;
+
+ struct clk *clk_div;
+ struct clk *clk;
+ const char *label;
+
+ unsigned int period_ns;
+ unsigned int duty_ns;
+
+ unsigned char tcon_base;
+ unsigned char running;
+ unsigned char use_count;
+ unsigned char pwm_id;
+};
+
+#define pwm_dbg(_pwm, msg...) dev_info(&(_pwm)->pdev->dev, msg)
+
+static struct clk *clk_scaler[2];
+
+/* Standard setup for a timer block. */
+
+#define TIMER_RESOURCE_SIZE (1)
+
+#define TIMER_RESOURCE(_tmr, _irq) \
+ (struct resource [TIMER_RESOURCE_SIZE]) { \
+ [0] = { \
+ .start = _irq, \
+ .end = _irq, \
+ .flags = IORESOURCE_IRQ \
+ } \
+ }
+
+#define DEFINE_TIMER(_tmr_no, _irq) \
+ .name = "s3c24xx-pwm", \
+ .id = _tmr_no, \
+ .num_resources = TIMER_RESOURCE_SIZE, \
+ .resource = TIMER_RESOURCE(_tmr_no, _irq), \
+
+/* since we already have an static mapping for the timer, we do not
+ * bother setting any IO resource for the base.
+ */
+
+struct platform_device s3c_device_timer[] = {
+ [0] = { DEFINE_TIMER(0, IRQ_TIMER0) },
+ [1] = { DEFINE_TIMER(1, IRQ_TIMER1) },
+ [2] = { DEFINE_TIMER(2, IRQ_TIMER2) },
+ [3] = { DEFINE_TIMER(3, IRQ_TIMER3) },
+ [4] = { DEFINE_TIMER(4, IRQ_TIMER4) },
+};
+
+static inline int pwm_is_tdiv(struct pwm_device *pwm)
+{
+ return clk_get_parent(pwm->clk) == pwm->clk_div;
+}
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+ struct pwm_device *pwm;
+ int found = 0;
+
+ mutex_lock(&pwm_lock);
+
+ list_for_each_entry(pwm, &pwm_list, list) {
+ if (pwm->pwm_id == pwm_id) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (found) {
+ if (pwm->use_count == 0) {
+ pwm->use_count = 1;
+ pwm->label = label;
+ } else
+ pwm = ERR_PTR(-EBUSY);
+ } else
+ pwm = ERR_PTR(-ENOENT);
+
+ mutex_unlock(&pwm_lock);
+ return pwm;
+}
+
+EXPORT_SYMBOL(pwm_request);
+
+
+void pwm_free(struct pwm_device *pwm)
+{
+ mutex_lock(&pwm_lock);
+
+ if (pwm->use_count) {
+ pwm->use_count--;
+ pwm->label = NULL;
+ } else
+ printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id);
+
+ mutex_unlock(&pwm_lock);
+}
+
+EXPORT_SYMBOL(pwm_free);
+
+#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0))
+#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2))
+#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3))
+#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1))
+
+int pwm_enable(struct pwm_device *pwm)
+{
+ unsigned long flags;
+ unsigned long tcon;
+
+ local_irq_save(flags);
+
+ tcon = __raw_readl(S3C2410_TCON);
+ tcon |= pwm_tcon_start(pwm);
+ __raw_writel(tcon, S3C2410_TCON);
+
+ local_irq_restore(flags);
+
+ pwm->running = 1;
+ return 0;
+}
+
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+ unsigned long flags;
+ unsigned long tcon;
+
+ local_irq_save(flags);
+
+ tcon = __raw_readl(S3C2410_TCON);
+ tcon &= ~pwm_tcon_start(pwm);
+ __raw_writel(tcon, S3C2410_TCON);
+
+ local_irq_restore(flags);
+
+ pwm->running = 0;
+}
+
+EXPORT_SYMBOL(pwm_disable);
+
+unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
+{
+ unsigned long tin_parent_rate;
+ unsigned int div;
+
+ tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div));
+ pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate);
+
+ for (div = 2; div <= 16; div *= 2) {
+ if ((tin_parent_rate / (div << 16)) < freq)
+ return tin_parent_rate / div;
+ }
+
+ return tin_parent_rate / 16;
+}
+
+#define NS_IN_HZ (1000000000UL)
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+ unsigned long tin_rate;
+ unsigned long tin_ns;
+ unsigned long period;
+ unsigned long flags;
+ unsigned long tcon;
+ unsigned long tcnt;
+ long tcmp;
+
+ /* We currently avoid using 64bit arithmetic by using the
+ * fact that anything faster than 1Hz is easily representable
+ * by 32bits. */
+
+ if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ)
+ return -ERANGE;
+
+ if (duty_ns > period_ns)
+ return -EINVAL;
+
+ if (period_ns == pwm->period_ns &&
+ duty_ns == pwm->duty_ns)
+ return 0;
+
+ /* The TCMP and TCNT can be read without a lock, they're not
+ * shared between the timers. */
+
+ tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id));
+ tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id));
+
+ period = NS_IN_HZ / period_ns;
+
+ pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n",
+ duty_ns, period_ns, period);
+
+ /* Check to see if we are changing the clock rate of the PWM */
+
+ if (pwm->period_ns != period_ns) {
+ if (pwm_is_tdiv(pwm)) {
+ tin_rate = pwm_calc_tin(pwm, period);
+ clk_set_rate(pwm->clk_div, tin_rate);
+ } else
+ tin_rate = clk_get_rate(pwm->clk);
+
+ pwm->period_ns = period_ns;
+
+ pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate);
+
+ tin_ns = NS_IN_HZ / tin_rate;
+ tcnt = period_ns / tin_ns;
+ } else
+ tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk);
+
+ /* Note, counters count down */
+
+ tcmp = duty_ns / tin_ns;
+ tcmp = tcnt - tcmp;
+
+ pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
+
+ if (tcmp < 0)
+ tcmp = 0;
+
+ /* Update the PWM register block. */
+
+ local_irq_save(flags);
+
+ __raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id));
+ __raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id));
+
+ tcon = __raw_readl(S3C2410_TCON);
+ tcon |= pwm_tcon_manulupdate(pwm);
+ tcon |= pwm_tcon_autoreload(pwm);
+ __raw_writel(tcon, S3C2410_TCON);
+
+ tcon &= ~pwm_tcon_manulupdate(pwm);
+ __raw_writel(tcon, S3C2410_TCON);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(pwm_config);
+
+static int pwm_register(struct pwm_device *pwm)
+{
+ pwm->duty_ns = -1;
+ pwm->period_ns = -1;
+
+ mutex_lock(&pwm_lock);
+ list_add_tail(&pwm->list, &pwm_list);
+ mutex_unlock(&pwm_lock);
+
+ return 0;
+}
+
+static int s3c_pwm_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct pwm_device *pwm;
+ unsigned long flags;
+ unsigned long tcon;
+ unsigned int id = pdev->id;
+ int ret;
+
+ if (id == 4) {
+ dev_err(dev, "TIMER4 is currently not supported\n");
+ return -ENXIO;
+ }
+
+ pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+ if (pwm == NULL) {
+ dev_err(dev, "failed to allocate pwm_device\n");
+ return -ENOMEM;
+ }
+
+ pwm->pdev = pdev;
+ pwm->pwm_id = id;
+
+ /* calculate base of control bits in TCON */
+ pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4;
+
+ pwm->clk = clk_get(dev, "pwm-tin");
+ if (IS_ERR(pwm->clk)) {
+ dev_err(dev, "failed to get pwm tin clk\n");
+ ret = PTR_ERR(pwm->clk);
+ goto err_alloc;
+ }
+
+ pwm->clk_div = clk_get(dev, "pwm-tdiv");
+ if (IS_ERR(pwm->clk_div)) {
+ dev_err(dev, "failed to get pwm tdiv clk\n");
+ ret = PTR_ERR(pwm->clk_div);
+ goto err_clk_tin;
+ }
+
+ local_irq_save(flags);
+
+ tcon = __raw_readl(S3C2410_TCON);
+ tcon |= pwm_tcon_invert(pwm);
+ __raw_writel(tcon, S3C2410_TCON);
+
+ local_irq_restore(flags);
+
+
+ ret = pwm_register(pwm);
+ if (ret) {
+ dev_err(dev, "failed to register pwm\n");
+ goto err_clk_tdiv;
+ }
+
+ pwm_dbg(pwm, "config bits %02x\n",
+ (__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f);
+
+ dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n",
+ clk_get_rate(pwm->clk),
+ clk_get_rate(pwm->clk_div),
+ pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base);
+
+ platform_set_drvdata(pdev, pwm);
+ return 0;
+
+ err_clk_tdiv:
+ clk_put(pwm->clk_div);
+
+ err_clk_tin:
+ clk_put(pwm->clk);
+
+ err_alloc:
+ kfree(pwm);
+ return ret;
+}
+
+static int s3c_pwm_remove(struct platform_device *pdev)
+{
+ struct pwm_device *pwm = platform_get_drvdata(pdev);
+
+ clk_put(pwm->clk_div);
+ clk_put(pwm->clk);
+ kfree(pwm);
+
+ return 0;
+}
+
+static struct platform_driver s3c_pwm_driver = {
+ .driver = {
+ .name = "s3c24xx-pwm",
+ .owner = THIS_MODULE,
+ },
+ .probe = s3c_pwm_probe,
+ .remove = __devexit_p(s3c_pwm_remove),
+};
+
+static int __init pwm_init(void)
+{
+ int ret;
+
+ clk_scaler[0] = clk_get(NULL, "pwm-scaler0");
+ clk_scaler[1] = clk_get(NULL, "pwm-scaler1");
+
+ if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) {
+ printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__);
+ return -EINVAL;
+ }
+
+ ret = platform_driver_register(&s3c_pwm_driver);
+ if (ret)
+ printk(KERN_ERR "%s: failed to add pwm driver\n", __func__);
+
+ return ret;
+}
+
+arch_initcall(pwm_init);
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 207a8b5a0c4a..0be5630ff568 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Sat Apr 19 11:23:38 2008
+# Last update: Mon Jul 7 16:25:39 2008
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -560,7 +560,6 @@ husky MACH_HUSKY HUSKY 543
boxer MACH_BOXER BOXER 544
shepherd MACH_SHEPHERD SHEPHERD 545
aml42800aa MACH_AML42800AA AML42800AA 546
-ml674001 MACH_MACH_TYPE_ML674001 MACH_TYPE_ML674001 547
lpc2294 MACH_LPC2294 LPC2294 548
switchgrass MACH_SWITCHGRASS SWITCHGRASS 549
ens_cmu MACH_ENS_CMU ENS_CMU 550
@@ -748,7 +747,6 @@ anubis MACH_ANUBIS ANUBIS 734
ite8152 MACH_ITE8152 ITE8152 735
lpc3xxx MACH_LPC3XXX LPC3XXX 736
puppeteer MACH_PUPPETEER PUPPETEER 737
-vt001 MACH_MACH_VADATECH MACH_VADATECH 738
e570 MACH_E570 E570 739
x50 MACH_X50 X50 740
recon MACH_RECON RECON 741
@@ -839,7 +837,7 @@ ccxp270 MACH_CCXP CCXP 825
omap_gsample MACH_OMAP_GSAMPLE OMAP_GSAMPLE 826
realview_eb MACH_REALVIEW_EB REALVIEW_EB 827
samoa MACH_SAMOA SAMOA 828
-t3xscale MACH_T3XSCALE T3XSCALE 829
+palmt3 MACH_PALMT3 PALMT3 829
i878 MACH_I878 I878 830
borzoi MACH_BORZOI BORZOI 831
gecko MACH_GECKO GECKO 832
@@ -895,7 +893,7 @@ mio8390 MACH_MIO8390 MIO8390 881
omi_board MACH_OMI_BOARD OMI_BOARD 882
mx21civ MACH_MX21CIV MX21CIV 883
mahi_cdac MACH_MAHI_CDAC MAHI_CDAC 884
-xscale_palmtx MACH_XSCALE_PALMTX XSCALE_PALMTX 885
+palmtx MACH_PALMTX PALMTX 885
s3c2413 MACH_S3C2413 S3C2413 887
samsys_ep0 MACH_SAMSYS_EP0 SAMSYS_EP0 888
wg302v1 MACH_WG302V1 WG302V1 889
@@ -918,7 +916,7 @@ nxdb500 MACH_NXDB500 NXDB500 905
apf9328 MACH_APF9328 APF9328 906
omap_wipoq MACH_OMAP_WIPOQ OMAP_WIPOQ 907
omap_twip MACH_OMAP_TWIP OMAP_TWIP 908
-xscale_treo650 MACH_XSCALE_PALMTREO650 XSCALE_PALMTREO650 909
+palmtreo650 MACH_PALMTREO650 PALMTREO650 909
acumen MACH_ACUMEN ACUMEN 910
xp100 MACH_XP100 XP100 911
fs2410 MACH_FS2410 FS2410 912
@@ -926,8 +924,8 @@ pxa270_cerf MACH_PXA270_CERF PXA270_CERF 913
sq2ftlpalm MACH_SQ2FTLPALM SQ2FTLPALM 914
bsemserver MACH_BSEMSERVER BSEMSERVER 915
netclient MACH_NETCLIENT NETCLIENT 916
-xscale_palmtt5 MACH_XSCALE_PALMTT5 XSCALE_PALMTT5 917
-xscale_palmtc MACH_OMAP_PALMTC OMAP_PALMTC 918
+palmt5 MACH_PALMT5 PALMT5 917
+palmtc MACH_PALMTC PALMTC 918
omap_apollon MACH_OMAP_APOLLON OMAP_APOLLON 919
mxc30030evb MACH_MXC30030EVB MXC30030EVB 920
rea_2d MACH_REA_2D REA_2D 921
@@ -1220,7 +1218,6 @@ empca400 MACH_EMPCA400 EMPCA400 1211
em7210 MACH_EM7210 EM7210 1212
htchermes MACH_HTCHERMES HTCHERMES 1213
eti_c1 MACH_ETI_C1 ETI_C1 1214
-mach_dep2410 MACH_MACH_DEP2410 MACH_DEP2410 1215
ac100 MACH_AC100 AC100 1216
sneetch MACH_SNEETCH SNEETCH 1217
studentmate MACH_STUDENTMATE STUDENTMATE 1218
@@ -1421,10 +1418,10 @@ looxc550 MACH_LOOXC550 LOOXC550 1417
cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418
app3xx MACH_APP3XX APP3XX 1419
sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420
-xscale_palmt700p MACH_XSCALE_PALMT700P XSCALE_PALMT700P 1421
-xscale_palmt700w MACH_XSCALE_PALMT700W XSCALE_PALMT700W 1422
-xscale_palmt750 MACH_XSCALE_PALMT750 XSCALE_PALMT750 1423
-xscale_palmt755p MACH_XSCALE_PALMT755P XSCALE_PALMT755P 1424
+palmtreo700p MACH_PALMTREO700P PALMTREO700P 1421
+palmtreo700w MACH_PALMTREO700W PALMTREO700W 1422
+palmtreo750 MACH_PALMTREO750 PALMTREO750 1423
+palmtreo755p MACH_PALMTREO755P PALMTREO755P 1424
ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425
sarge MACH_SARGE SARGE 1426
a696 MACH_A696 A696 1427
@@ -1463,7 +1460,7 @@ artemis MACH_ARTEMIS ARTEMIS 1462
htctitan MACH_HTCTITAN HTCTITAN 1463
qranium MACH_QRANIUM QRANIUM 1464
adx_wsc2 MACH_ADX_WSC2 ADX_WSC2 1465
-adx_medcom MACH_ADX_MEDINET ADX_MEDINET 1466
+adx_medcom MACH_ADX_MEDCOM ADX_MEDCOM 1466
bboard MACH_BBOARD BBOARD 1467
cambria MACH_CAMBRIA CAMBRIA 1468
mt7xxx MACH_MT7XXX MT7XXX 1469
@@ -1519,7 +1516,7 @@ wp188 MACH_WP188 WP188 1518
corsica MACH_CORSICA CORSICA 1519
bigeye MACH_BIGEYE BIGEYE 1520
tll5000 MACH_TLL5000 TLL5000 1522
-hni270 MACH_HNI_X270 HNI_X270 1523
+bebot MACH_BEBOT BEBOT 1523
qong MACH_QONG QONG 1524
tcompact MACH_TCOMPACT TCOMPACT 1525
puma5 MACH_PUMA5 PUMA5 1526
@@ -1636,7 +1633,6 @@ awlug4lcu MACH_AWLUG4LCU AWLUG4LCU 1637
palermoc MACH_PALERMOC PALERMOC 1638
omap_ldp MACH_OMAP_LDP OMAP_LDP 1639
ip500 MACH_IP500 IP500 1640
-mx35ads MACH_MACH_MX35ADS MACH_MX35ADS 1641
ase2 MACH_ASE2 ASE2 1642
mx35evb MACH_MX35EVB MX35EVB 1643
aml_m8050 MACH_AML_M8050 AML_M8050 1644
@@ -1647,7 +1643,7 @@ badger MACH_BADGER BADGER 1648
trizeps4wl MACH_TRIZEPS4WL TRIZEPS4WL 1649
trizeps5 MACH_TRIZEPS5 TRIZEPS5 1650
marlin MACH_MARLIN MARLIN 1651
-ts7800 MACH_TS7800 TS7800 1652
+ts78xx MACH_TS78XX TS78XX 1652
hpipaq214 MACH_HPIPAQ214 HPIPAQ214 1653
at572d940dcm MACH_AT572D940DCM AT572D940DCM 1654
ne1board MACH_NE1BOARD NE1BOARD 1655
@@ -1720,3 +1716,99 @@ htc_kaiser MACH_HTC_KAISER HTC_KAISER 1724
lg_ks20 MACH_LG_KS20 LG_KS20 1725
hhgps MACH_HHGPS HHGPS 1726
nokia_n810_wimax MACH_NOKIA_N810_WIMAX NOKIA_N810_WIMAX 1727
+insight MACH_INSIGHT INSIGHT 1728
+sapphire MACH_SAPPHIRE SAPPHIRE 1729
+csb637xo MACH_CSB637XO CSB637XO 1730
+evisiong MACH_EVISIONG EVISIONG 1731
+stmp37xx MACH_STMP37XX STMP37XX 1732
+stmp378x MACH_STMP38XX STMP38XX 1733
+tnt MACH_TNT TNT 1734
+tbxt MACH_TBXT TBXT 1735
+playmate MACH_PLAYMATE PLAYMATE 1736
+pns10 MACH_PNS10 PNS10 1737
+eznavi MACH_EZNAVI EZNAVI 1738
+ps4000 MACH_PS4000 PS4000 1739
+ezx_a780 MACH_EZX_A780 EZX_A780 1740
+ezx_e680 MACH_EZX_E680 EZX_E680 1741
+ezx_a1200 MACH_EZX_A1200 EZX_A1200 1742
+ezx_e6 MACH_EZX_E6 EZX_E6 1743
+ezx_e2 MACH_EZX_E2 EZX_E2 1744
+ezx_a910 MACH_EZX_A910 EZX_A910 1745
+cwmx31 MACH_CWMX31 CWMX31 1746
+sl2312 MACH_SL2312 SL2312 1747
+blenny MACH_BLENNY BLENNY 1748
+ds107 MACH_DS107 DS107 1749
+dsx07 MACH_DSX07 DSX07 1750
+picocom1 MACH_PICOCOM1 PICOCOM1 1751
+lynx_wolverine MACH_LYNX_WOLVERINE LYNX_WOLVERINE 1752
+ubisys_p9_sc19 MACH_UBISYS_P9_SC19 UBISYS_P9_SC19 1753
+kratos_low MACH_KRATOS_LOW KRATOS_LOW 1754
+m700 MACH_M700 M700 1755
+edmini_v2 MACH_EDMINI_V2 EDMINI_V2 1756
+zipit2 MACH_ZIPIT2 ZIPIT2 1757
+hslfemtocell MACH_HSLFEMTOCELL HSLFEMTOCELL 1758
+daintree_at91 MACH_DAINTREE_AT91 DAINTREE_AT91 1759
+sg560usb MACH_SG560USB SG560USB 1760
+omap3_pandora MACH_OMAP3_PANDORA OMAP3_PANDORA 1761
+usr8200 MACH_USR8200 USR8200 1762
+s1s65k MACH_S1S65K S1S65K 1763
+s2s65a MACH_S2S65A S2S65A 1764
+icore MACH_ICORE ICORE 1765
+mss2 MACH_MSS2 MSS2 1766
+belmont MACH_BELMONT BELMONT 1767
+asusp525 MACH_ASUSP525 ASUSP525 1768
+lb88rc8480 MACH_LB88RC8480 LB88RC8480 1769
+hipxa MACH_HIPXA HIPXA 1770
+mx25_3ds MACH_MX25_3DS MX25_3DS 1771
+m800 MACH_M800 M800 1772
+omap3530_lv_som MACH_OMAP3530_LV_SOM OMAP3530_LV_SOM 1773
+prima_evb MACH_PRIMA_EVB PRIMA_EVB 1774
+mx31bt1 MACH_MX31BT1 MX31BT1 1775
+atlas4_evb MACH_ATLAS4_EVB ATLAS4_EVB 1776
+mx31cicada MACH_MX31CICADA MX31CICADA 1777
+mi424wr MACH_MI424WR MI424WR 1778
+axs_ultrax MACH_AXS_ULTRAX AXS_ULTRAX 1779
+at572d940deb MACH_AT572D940DEB AT572D940DEB 1780
+davinci_da8xx_evm MACH_DAVINCI_DA8XX_EVM DAVINCI_DA8XX_EVM 1781
+ep9302 MACH_EP9302 EP9302 1782
+at572d940hfeb MACH_AT572D940HFEB AT572D940HFEB 1783
+cybook3 MACH_CYBOOK3 CYBOOK3 1784
+wdg002 MACH_WDG002 WDG002 1785
+sg560adsl MACH_SG560ADSL SG560ADSL 1786
+nextio_n2800_ica MACH_NEXTIO_N2800_ICA NEXTIO_N2800_ICA 1787
+marvell_newdb MACH_MARVELL_NEWDB MARVELL_NEWDB 1789
+vandihud MACH_VANDIHUD VANDIHUD 1790
+magx_e8 MACH_MAGX_E8 MAGX_E8 1791
+magx_z6 MACH_MAGX_Z6 MAGX_Z6 1792
+magx_v8 MACH_MAGX_V8 MAGX_V8 1793
+magx_u9 MACH_MAGX_U9 MAGX_U9 1794
+toughcf08 MACH_TOUGHCF08 TOUGHCF08 1795
+zw4400 MACH_ZW4400 ZW4400 1796
+marat91 MACH_MARAT91 MARAT91 1797
+overo MACH_OVERO OVERO 1798
+at2440evb MACH_AT2440EVB AT2440EVB 1799
+neocore926 MACH_NEOCORE926 NEOCORE926 1800
+wnr854t MACH_WNR854T WNR854T 1801
+imx27 MACH_IMX27 IMX27 1802
+moose_db MACH_MOOSE_DB MOOSE_DB 1803
+fab4 MACH_FAB4 FAB4 1804
+htcdiamond MACH_HTCDIAMOND HTCDIAMOND 1805
+fiona MACH_FIONA FIONA 1806
+mxc30030_x MACH_MXC30030_X MXC30030_X 1807
+bmp1000 MACH_BMP1000 BMP1000 1808
+logi9200 MACH_LOGI9200 LOGI9200 1809
+tqma31 MACH_TQMA31 TQMA31 1810
+ccw9p9215js MACH_CCW9P9215JS CCW9P9215JS 1811
+rd88f5181l_ge MACH_RD88F5181L_GE RD88F5181L_GE 1812
+sifmain MACH_SIFMAIN SIFMAIN 1813
+sam9_l9261 MACH_SAM9_L9261 SAM9_L9261 1814
+cc9m2443js MACH_CC9M2443JS CC9M2443JS 1815
+xaria300 MACH_XARIA300 XARIA300 1816
+it9200 MACH_IT9200 IT9200 1817
+rd88f5181l_fxo MACH_RD88F5181L_FXO RD88F5181L_FXO 1818
+kriss_sensor MACH_KRISS_SENSOR KRISS_SENSOR 1819
+pilz_pmi5 MACH_PILZ_PMI5 PILZ_PMI5 1820
+jade MACH_JADE JADE 1821
+ks8695_softplc MACH_KS8695_SOFTPLC KS8695_SOFTPLC 1822
+gprisc4 MACH_GPRISC4 GPRISC4 1823
+stamp9260 MACH_STAMP9260 STAMP9260 1824
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index f52db125432f..38f934ab50c7 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -226,7 +226,6 @@ CONFIG_CPU_HAS_PTEA=y
#
CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=16
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_SH_PCLK_FREQ=33333333
#
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index 9fa66d92a4e7..b68b6cdbb78f 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -231,7 +231,6 @@ CONFIG_CPU_HAS_PTEA=y
#
CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=16
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_SH_PCLK_FREQ=40000000
#
diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig
index 84717d854867..490dcbc2ce33 100644
--- a/arch/sh/configs/se7705_defconfig
+++ b/arch/sh/configs/se7705_defconfig
@@ -239,7 +239,6 @@ CONFIG_CPU_HAS_SR_RB=y
#
CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=16
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_SH_PCLK_FREQ=33333333
#
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
index 240a1cef69aa..2dd83af988f0 100644
--- a/arch/sh/configs/se7712_defconfig
+++ b/arch/sh/configs/se7712_defconfig
@@ -236,7 +236,6 @@ CONFIG_CPU_HAS_SR_RB=y
#
CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=16
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_SH_PCLK_FREQ=66666666
#
diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig
index c60b6fd4fc42..167786f9a9bd 100644
--- a/arch/sh/configs/se7750_defconfig
+++ b/arch/sh/configs/se7750_defconfig
@@ -235,7 +235,6 @@ CONFIG_CPU_HAS_PTEA=y
#
CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=16
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_SH_PCLK_FREQ=33333333
#
diff --git a/drivers/acorn/char/Makefile b/drivers/acorn/char/Makefile
deleted file mode 100644
index d006c9f168d2..000000000000
--- a/drivers/acorn/char/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the acorn character device drivers.
-#
-
-obj-$(CONFIG_L7200_KEYB) += defkeymap-l7200.o keyb_l7200.o
diff --git a/drivers/acorn/char/defkeymap-l7200.c b/drivers/acorn/char/defkeymap-l7200.c
deleted file mode 100644
index 93d80a1c36f9..000000000000
--- a/drivers/acorn/char/defkeymap-l7200.c
+++ /dev/null
@@ -1,386 +0,0 @@
-/*
- * linux/drivers/acorn/char/defkeymap-l7200.c
- *
- * Default keyboard maps for LinkUp Systems L7200 board
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- * 08-04-2000 SJH Created file
- */
-
-#include <linux/types.h>
-#include <linux/keyboard.h>
-#include <linux/kd.h>
-
-/* Normal (maps 1:1 with no processing) */
-#define KTn 0xF0
-/* Function keys */
-#define KTf 0xF1
-/* Special (Performs special house-keeping funcs) */
-#define KTs 0xF2
-#define KIGNORE K(KTs, 0) /* Ignore */
-#define KENTER K(KTs, 1) /* Enter */
-#define KREGS K(KTs, 2) /* Regs */
-#define KMEM K(KTs, 3) /* Mem */
-#define KSTAT K(KTs, 4) /* State */
-#define KINTR K(KTs, 5) /* Intr */
-#define Ksl 6 /* Last console */
-#define KCAPSLK K(KTs, 7) /* Caps lock */
-#define KNUMLK K(KTs, 8) /* Num-lock */
-#define KSCRLLK K(KTs, 9) /* Scroll-lock */
-#define KSCRLFOR K(KTs,10) /* Scroll forward */
-#define KSCRLBAK K(KTs,11) /* Scroll back */
-#define KREBOOT K(KTs,12) /* Reboot */
-#define KCAPSON K(KTs,13) /* Caps on */
-#define KCOMPOSE K(KTs,14) /* Compose */
-#define KSAK K(KTs,15) /* SAK */
-#define CONS_DEC K(KTs,16) /* Dec console */
-#define CONS_INC K(KTs,17) /* Incr console */
-#define KFLOPPY K(KTs,18) /* Floppy */
-/* Key pad (0-9 = digits, 10=+, 11=-, 12=*, 13=/, 14=enter, 16=., 17=# */
-#define KTp 0xF3
-#define KPAD_0 K(KTp, 0 )
-#define KPAD_1 K(KTp, 1 )
-#define KPAD_2 K(KTp, 2 )
-#define KPAD_3 K(KTp, 3 )
-#define KPAD_4 K(KTp, 4 )
-#define KPAD_5 K(KTp, 5 )
-#define KPAD_6 K(KTp, 6 )
-#define KPAD_7 K(KTp, 7 )
-#define KPAD_8 K(KTp, 8 )
-#define KPAD_9 K(KTp, 9 )
-#define KPAD_PL K(KTp,10 )
-#define KPAD_MI K(KTp,11 )
-#define KPAD_ML K(KTp,12 )
-#define KPAD_DV K(KTp,13 )
-#define KPAD_EN K(KTp,14 )
-#define KPAD_DT K(KTp,16 )
-#define KPAD_HS K(KTp,20 )
-/* Console switching */
-#define KCn 0xF5
-/* Cursor */
-#define KTc 0xF6
-#define Kcd 0 /* Cursor down */
-#define Kcl 1 /* Cursor left */
-#define Kcr 2 /* Cursor right */
-#define Kcu 3 /* Cursor up */
-/* Shift/alt modifiers etc */
-#define KMd 0xF7
-#define KSHIFT K(KMd, 0 )
-#define KALTGR K(KMd, 1 )
-#define KCTRL K(KMd, 2 )
-#define KALT K(KMd, 3 )
-/* Meta */
-#define KMt 0xF8
-#define KAs 0xF9
-#define KPADA_0 K(KAs, 0 )
-#define KPADA_1 K(KAs, 1 )
-#define KPADA_2 K(KAs, 2 )
-#define KPADA_3 K(KAs, 3 )
-#define KPADA_4 K(KAs, 4 )
-#define KPADA_5 K(KAs, 5 )
-#define KPADA_6 K(KAs, 6 )
-#define KPADA_7 K(KAs, 7 )
-#define KPADA_8 K(KAs, 8 )
-#define KPADA_9 K(KAs, 9 )
-#define KPADB_0 K(KAs,10 )
-#define KPADB_1 K(KAs,11 )
-#define KPADB_2 K(KAs,12 )
-#define KPADB_3 K(KAs,13 )
-#define KPADB_4 K(KAs,14 )
-#define KPADB_5 K(KAs,15 )
-#define KPADB_6 K(KAs,16 )
-#define KPADB_7 K(KAs,17 )
-#define KPADB_8 K(KAs,18 )
-#define KPADB_9 K(KAs,19 )
-/* Locking keys */
-#define KLk 0xFA
-/* Letters */
-#define KTl 0xFB
-
-/*
- * Here is the layout of the keys for the Fujitsu QWERTY
- * style keyboard:
- *
- * static char Fujitsu_Key_Table[] =
- * {
- * KALT, '`' , KNUL, KCTL, KFUN, KESC, '1' , '2' ,
- * '9' , '0' , '-' , '=' , KNUL, KBSP, KNUL, KNUL,
- * KNUL, KBSL, KSHF, KNUL, KNUL, KDEL, KNUL, 't' ,
- * 'y' , 'u' , 'i' , KRET, KSHF, KPGD, KNUL, KNUL,
- * KNUL, KTAB, KNUL, KNUL, KNUL, 'q' , 'w' , 'e' ,
- * 'r' , 'o' , 'p' , '[' , KNUL, ']' , KNUL, KNUL,
- * KNUL, 'z' , KNUL, KNUL, KNUL, KSHL, KNUL, KNUL,
- * 'k' , 'l' , ';' , KSQT, KNUL, KPGU, KNUL, KNUL,
- * KNUL, 'a' , KNUL, KNUL, KNUL, 's' , 'd' , 'f' ,
- * 'g' , 'h' , 'j' , '/' , KNUL, KHME, KNUL, KNUL,
- * KNUL, 'x' , KNUL, KNUL, KNUL, 'c' , 'v' , 'b' ,
- * 'n' , 'm' , ',' , '.' , KNUL, ' ' , KNUL, KNUL,
- * KNUL, KNUL, KNUL, KNUL, KNUL, '3' , '4' , '5' ,
- * '6' , '7' , '8' , KNUL, KPRG, KNUL, KEND, KNUL,
- * };
- */
-
-u_short plain_map[NR_KEYS]=
-{
- 0xf703, 0xf060, 0xf200, 0xf702, 0xf200, 0xf01b, 0xf031, 0xf032,
- 0xf039, 0xf030, 0xf02d, 0xf03d, 0xf200, 0xf07f, 0xf200, 0xf200,
- 0xf200, 0xf05c, 0xf700, 0xf200, 0xf200, 0xf116, 0xf000, 0xfb74,
- 0xfb79, 0xfb75, 0xfb69, 0xf201, 0xf700, 0xf600, 0xf200, 0xf200,
- 0xf200, 0xf009, 0xf200, 0xf200, 0xf200, 0xfb71, 0xfb77, 0xfb65,
- 0xfb72, 0xfb6f, 0xfb70, 0xf05b, 0xf200, 0xf05d, 0xf200, 0xf200,
- 0xf200, 0xfb7a, 0xf200, 0xf200, 0xf200, 0xf207, 0xf200, 0xf200,
- 0xfb6b, 0xfb6c, 0xf03b, 0xf027, 0xf200, 0xf603, 0xf200, 0xf200,
- 0xf200, 0xfb61, 0xf200, 0xf200, 0xf200, 0xfb73, 0xfb64, 0xfb66,
- 0xfb67, 0xfb68, 0xfb6a, 0xf02f, 0xf200, 0xf601, 0xf200, 0xf200,
- 0xf200, 0xfb78, 0xf200, 0xf200, 0xf200, 0xfb63, 0xfb76, 0xfb62,
- 0xfb6e, 0xfb6d, 0xf02c, 0xf02e, 0xf200, 0xf020, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf033, 0xf034, 0xf035,
- 0xf036, 0xf037, 0xf038, 0xf200, 0xf200, 0xf200, 0xf602, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-};
-
-u_short shift_map[NR_KEYS]=
-{
- 0xf703, 0xf07e, 0xf200, 0xf702, 0xf200, 0xf01b, 0xf021, 0xf040,
- 0xf028, 0xf029, 0xf05f, 0xf02b, 0xf200, 0xf07f, 0xf200, 0xf200,
- 0xf200, 0xf07c, 0xf700, 0xf200, 0xf200, 0xf116, 0xf000, 0xfb54,
- 0xfb59, 0xfb55, 0xfb49, 0xf201, 0xf700, 0xf600, 0xf200, 0xf200,
- 0xf200, 0xf009, 0xf200, 0xf200, 0xf200, 0xfb51, 0xfb57, 0xfb45,
- 0xfb52, 0xfb4f, 0xfb50, 0xf07b, 0xf200, 0xf07d, 0xf200, 0xf200,
- 0xf200, 0xfb5a, 0xf200, 0xf200, 0xf200, 0xf207, 0xf200, 0xf200,
- 0xfb4b, 0xfb4c, 0xf03a, 0xf022, 0xf200, 0xf603, 0xf200, 0xf200,
- 0xf200, 0xfb41, 0xf200, 0xf200, 0xf200, 0xfb53, 0xfb44, 0xfb46,
- 0xfb47, 0xfb48, 0xfb4a, 0xf03f, 0xf200, 0xf601, 0xf200, 0xf200,
- 0xf200, 0xfb58, 0xf200, 0xf200, 0xf200, 0xfb43, 0xfb56, 0xfb42,
- 0xfb4e, 0xfb4d, 0xf03c, 0xf03e, 0xf200, 0xf020, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf023, 0xf024, 0xf025,
- 0xf05e, 0xf026, 0xf02a, 0xf200, 0xf200, 0xf200, 0xf602, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-};
-
-u_short altgr_map[NR_KEYS]=
-{
- KIGNORE ,K(KCn,12 ),K(KCn,13 ),K(KCn,14 ),K(KCn,15 ),K(KCn,16 ),K(KCn,17 ),K(KCn, 18),
- K(KCn, 19),K(KCn,20 ),K(KCn,21 ),K(KCn,22 ),K(KCn,23 ),KIGNORE ,KREGS ,KINTR ,
- KIGNORE ,KIGNORE ,K(KTn,'@'),KIGNORE ,K(KTn,'$'),KIGNORE ,KIGNORE ,K(KTn,'{'),
- K(KTn,'['),K(KTn,']'),K(KTn,'}'),K(KTn,'\\'),KIGNORE ,KIGNORE ,KIGNORE ,K(KTf,21 ),
- K(KTf,20 ),K(KTf,24 ),KNUMLK ,KPAD_DV ,KPAD_ML ,KPAD_HS ,KIGNORE ,K(KTl,'q'),
- K(KTl,'w'),K(KTl,'e'),K(KTl,'r'),K(KTl,'t' ),K(KTl,'y'),K(KTl,'u'),K(KTl,'i' ),K(KTl,'o'),
- K(KTl,'p'),KIGNORE ,K(KTn,'~'),KIGNORE ,K(KTf,22 ),K(KTf,23 ),K(KTf,25 ),KPADB_7 ,
- KPADB_8 ,KPADB_9 ,KPAD_MI ,KCTRL ,K(KAs,20 ),K(KTl,'s'),K(KAs,23 ),K(KAs,25 ),
- K(KTl,'g'),K(KTl,'h'),K(KTl,'j'),K(KTl,'k' ),K(KTl,'l'),KIGNORE ,KIGNORE ,KENTER ,
- KPADB_4 ,KPADB_5 ,KPADB_6 ,KPAD_PL ,KSHIFT ,KIGNORE ,K(KTl,'z' ),K(KTl,'x'),
- K(KAs,22 ),K(KTl,'v'),K(KTl,21 ),K(KTl,'n' ),K(KTl,'m'),KIGNORE ,KIGNORE ,KIGNORE ,
- KSHIFT ,K(KTc,Kcu),KPADB_1 ,KPADB_2 ,KPADB_3 ,KCAPSLK ,KALT ,KIGNORE ,
- KALTGR ,KCTRL ,K(KTc,Kcl),K(KTc,Kcd ),K(KTc,Kcr),KPADB_0 ,KPAD_DT ,KPAD_EN ,
- KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
- KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
- KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
-};
-
-u_short ctrl_map[NR_KEYS]=
-{
- 0xf703, 0xf200, 0xf200, 0xf702, 0xf200, 0xf200, 0xf001, 0xf002,
- 0xf009, 0xf000, 0xf031, 0xf200, 0xf200, 0xf07f, 0xf200, 0xf200,
- 0xf200, 0xf01c, 0xf700, 0xf200, 0xf200, 0xf116, 0xf000, 0xf020,
- 0xf019, 0xf015, 0xf009, 0xf201, 0xf700, 0xf600, 0xf200, 0xf200,
- 0xf200, 0xf009, 0xf200, 0xf200, 0xf200, 0xf011, 0xf017, 0xf005,
- 0xf012, 0xf00f, 0xf010, 0xf01b, 0xf200, 0xf01d, 0xf200, 0xf200,
- 0xf200, 0xf01a, 0xf200, 0xf200, 0xf200, 0xf207, 0xf200, 0xf200,
- 0xf00b, 0xf00c, 0xf200, 0xf007, 0xf200, 0xf603, 0xf200, 0xf200,
- 0xf200, 0xf001, 0xf200, 0xf200, 0xf200, 0xf001, 0xf013, 0xf006,
- 0xf007, 0xf008, 0xf00a, 0xf07f, 0xf200, 0xf601, 0xf200, 0xf200,
- 0xf200, 0xf018, 0xf200, 0xf200, 0xf200, 0xf003, 0xf016, 0xf002,
- 0xf00e, 0xf00d, 0xf200, 0xf200, 0xf200, 0xf000, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf01b, 0xf01c, 0xf01d,
- 0xf036, 0xf037, 0xf038, 0xf200, 0xf200, 0xf200, 0xf602, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf602, 0xf200,
-};
-
-u_short shift_ctrl_map[NR_KEYS]=
-{
- KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
- KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KFLOPPY ,KINTR ,
- KIGNORE ,KIGNORE ,K(KTn, 0 ),KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
- KIGNORE ,KIGNORE ,KIGNORE ,K(KTn,31 ),KIGNORE ,KIGNORE ,KIGNORE ,K(KTf,21 ),
- K(KTf,20 ),K(KTf,24 ),KNUMLK ,KPAD_DV ,KPAD_ML ,KPAD_HS ,KIGNORE ,K(KTn,17 ),
- K(KTn,23 ),K(KTn, 5 ),K(KTn,18 ),K(KTn,20 ),K(KTn,25 ),K(KTn,21 ),K(KTn, 9 ),K(KTn,15 ),
- K(KTn,16 ),KIGNORE ,KIGNORE ,KIGNORE ,K(KTf,22 ),K(KTf,23 ),K(KTf,25 ),KPAD_7 ,
- KPAD_8 ,KPAD_9 ,KPAD_MI ,KCTRL ,K(KTn, 1 ),K(KTn,19 ),K(KTn, 4 ),K(KTn, 6 ),
- K(KTn, 7 ),K(KTn, 8 ),K(KTn,10 ),K(KTn,11 ),K(KTn,12 ),KIGNORE ,K(KTn, 7 ),KENTER ,
- KPAD_4 ,KPAD_5 ,KPAD_6 ,KPAD_PL ,KSHIFT ,KIGNORE ,K(KTn,26 ),K(KTn,24 ),
- K(KTn, 3 ),K(KTn,22 ),K(KTn, 2 ),K(KTn,14 ),K(KTn,13 ),KIGNORE ,KIGNORE ,KIGNORE ,
- KSHIFT ,K(KTc,Kcu),KPAD_1 ,KPAD_2 ,KPAD_3 ,KCAPSLK ,KALT ,K(KTn, 0 ),
- KALTGR ,KCTRL ,K(KTc,Kcl),K(KTc,Kcd ),K(KTc,Kcr),KPAD_0 ,KPAD_DT ,KPAD_EN ,
- KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
- KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
- KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
-};
-
-u_short alt_map[NR_KEYS]=
-{
- K(KMt,27 ),K(KCn, 0 ),K(KCn, 1 ),K(KCn, 2 ),K(KCn, 3 ),K(KCn, 4 ),K(KCn, 5 ),K(KCn, 6 ),
- K(KCn, 7 ),K(KCn, 8 ),K(KCn, 9 ),K(KCn,10 ),K(KCn,11 ),KIGNORE ,KSCRLLK ,KINTR ,
- K(KMt,'`'),K(KMt,'1'),K(KMt,'2'),K(KMt,'3' ),K(KMt,'4'),K(KMt,'5'),K(KMt,'6' ),K(KMt,'7'),
- K(KMt,'8'),K(KMt,'9'),K(KMt,'0'),K(KMt,'-' ),K(KMt,'='),K(KMt,'£'),K(KMt,127 ),K(KTf,21 ),
- K(KTf,20 ),K(KTf,24 ),KNUMLK ,KPAD_DV ,KPAD_ML ,KPAD_HS ,K(KMt, 9 ),K(KMt,'q'),
- K(KMt,'w'),K(KMt,'e'),K(KMt,'r'),K(KMt,'t' ),K(KMt,'y'),K(KMt,'u'),K(KMt,'i' ),K(KMt,'o'),
- K(KMt,'p'),K(KMt,'['),K(KMt,']'),K(KMt,'\\'),K(KTf,22 ),K(KTf,23 ),K(KTf,25 ),KPADA_7 ,
- KPADA_8 ,KPADA_9 ,KPAD_MI ,KCTRL ,K(KMt,'a'),K(KMt,'s'),K(KMt,'d' ),K(KMt,'f'),
- K(KMt,'g'),K(KMt,'h'),K(KMt,'j'),K(KMt,'k' ),K(KMt,'l'),K(KMt,';'),K(KMt,'\''),K(KMt,13 ),
- KPADA_4 ,KPADA_5 ,KPADA_6 ,KPAD_PL ,KSHIFT ,KIGNORE ,K(KMt,'z' ),K(KMt,'x'),
- K(KMt,'c'),K(KMt,'v'),K(KMt,'b'),K(KMt,'n' ),K(KMt,'m'),K(KMt,','),K(KMt,'.' ),KIGNORE ,
- KSHIFT ,K(KTc,Kcu),KPADA_1 ,KPADA_2 ,KPADA_3 ,KCAPSLK ,KALT ,K(KMt,' '),
- KALTGR ,KCTRL ,CONS_DEC ,K(KTc,Kcd ),CONS_INC ,KPADA_0 ,KPAD_DT ,KPAD_EN ,
- KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
- KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
- KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
-};
-
-u_short ctrl_alt_map[NR_KEYS]=
-{
- KIGNORE ,K(KCn, 0 ),K(KCn, 1 ),K(KCn, 2 ),K(KCn, 3 ),K(KCn, 4 ),K(KCn, 5 ),K(KCn, 6 ),
- K(KCn, 7 ),K(KCn, 8 ),K(KCn, 9 ),K(KCn,10 ),K(KCn,11 ),KIGNORE ,KIGNORE ,KINTR ,
- KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
- KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,K(KTf,21 ),
- K(KTf,20 ),K(KTf,24 ),KNUMLK ,KPAD_DV ,KPAD_ML ,KPAD_HS ,KIGNORE ,K(KMt,17 ),
- K(KMt,23 ),K(KMt, 5 ),K(KMt,18 ),K(KMt,20 ),K(KMt,25 ),K(KMt,21 ),K(KMt, 9 ),K(KMt,15 ),
- K(KMt,16 ),KIGNORE ,KIGNORE ,KIGNORE ,KREBOOT ,K(KTf,23 ),K(KTf,25 ),KPAD_7 ,
- KPAD_8 ,KPAD_9 ,KPAD_MI ,KCTRL ,K(KMt, 1 ),K(KMt,19 ),K(KMt, 4 ),K(KMt, 6 ),
- K(KMt, 7 ),K(KMt, 8 ),K(KMt,10 ),K(KMt,11 ),K(KMt,12 ),KIGNORE ,KIGNORE ,KENTER ,
- KPAD_4 ,KPAD_5 ,KPAD_6 ,KPAD_PL ,KSHIFT ,KIGNORE ,K(KMt,26 ),K(KMt,24 ),
- K(KMt, 3 ),K(KMt,22 ),K(KMt, 2 ),K(KMt,14 ),K(KMt,13 ),KIGNORE ,KIGNORE ,KIGNORE ,
- KSHIFT ,K(KTc,Kcu),KPAD_1 ,KPAD_2 ,KPAD_3 ,KCAPSLK ,KALT ,KIGNORE ,
- KALTGR ,KCTRL ,K(KTc,Kcl),K(KTc,Kcd ),K(KTc,Kcr),KPAD_0 ,KREBOOT ,KPAD_EN ,
- KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
- KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
- KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
-};
-
-ushort *key_maps[MAX_NR_KEYMAPS] = {
- plain_map, shift_map, altgr_map, 0,
- ctrl_map, shift_ctrl_map, 0, 0,
- alt_map, 0, 0, 0,
- ctrl_alt_map, 0
-};
-
-unsigned int keymap_count = 7;
-
-/*
- * Philosophy: most people do not define more strings, but they who do
- * often want quite a lot of string space. So, we statically allocate
- * the default and allocate dynamically in chunks of 512 bytes.
- */
-
-char func_buf[] = {
- '\033', '[', '[', 'A', 0,
- '\033', '[', '[', 'B', 0,
- '\033', '[', '[', 'C', 0,
- '\033', '[', '[', 'D', 0,
- '\033', '[', '[', 'E', 0,
- '\033', '[', '1', '7', '~', 0,
- '\033', '[', '1', '8', '~', 0,
- '\033', '[', '1', '9', '~', 0,
- '\033', '[', '2', '0', '~', 0,
- '\033', '[', '2', '1', '~', 0,
- '\033', '[', '2', '3', '~', 0,
- '\033', '[', '2', '4', '~', 0,
- '\033', '[', '2', '5', '~', 0,
- '\033', '[', '2', '6', '~', 0,
- '\033', '[', '2', '8', '~', 0,
- '\033', '[', '2', '9', '~', 0,
- '\033', '[', '3', '1', '~', 0,
- '\033', '[', '3', '2', '~', 0,
- '\033', '[', '3', '3', '~', 0,
- '\033', '[', '3', '4', '~', 0,
- '\033', '[', '1', '~', 0,
- '\033', '[', '2', '~', 0,
- '\033', '[', '3', '~', 0,
- '\033', '[', '4', '~', 0,
- '\033', '[', '5', '~', 0,
- '\033', '[', '6', '~', 0,
- '\033', '[', 'M', 0,
- '\033', '[', 'P', 0,
-};
-
-char *funcbufptr = func_buf;
-int funcbufsize = sizeof(func_buf);
-int funcbufleft = 0; /* space left */
-
-char *func_table[MAX_NR_FUNC] = {
- func_buf + 0,
- func_buf + 5,
- func_buf + 10,
- func_buf + 15,
- func_buf + 20,
- func_buf + 25,
- func_buf + 31,
- func_buf + 37,
- func_buf + 43,
- func_buf + 49,
- func_buf + 55,
- func_buf + 61,
- func_buf + 67,
- func_buf + 73,
- func_buf + 79,
- func_buf + 85,
- func_buf + 91,
- func_buf + 97,
- func_buf + 103,
- func_buf + 109,
- func_buf + 115,
- func_buf + 120,
- func_buf + 125,
- func_buf + 130,
- func_buf + 135,
- func_buf + 140,
- func_buf + 145,
- 0,
- 0,
- func_buf + 149,
- 0,
-};
-
-struct kbdiacruc accent_table[MAX_DIACR] = {
- {'`', 'A', 0300}, {'`', 'a', 0340},
- {'\'', 'A', 0301}, {'\'', 'a', 0341},
- {'^', 'A', 0302}, {'^', 'a', 0342},
- {'~', 'A', 0303}, {'~', 'a', 0343},
- {'"', 'A', 0304}, {'"', 'a', 0344},
- {'O', 'A', 0305}, {'o', 'a', 0345},
- {'0', 'A', 0305}, {'0', 'a', 0345},
- {'A', 'A', 0305}, {'a', 'a', 0345},
- {'A', 'E', 0306}, {'a', 'e', 0346},
- {',', 'C', 0307}, {',', 'c', 0347},
- {'`', 'E', 0310}, {'`', 'e', 0350},
- {'\'', 'E', 0311}, {'\'', 'e', 0351},
- {'^', 'E', 0312}, {'^', 'e', 0352},
- {'"', 'E', 0313}, {'"', 'e', 0353},
- {'`', 'I', 0314}, {'`', 'i', 0354},
- {'\'', 'I', 0315}, {'\'', 'i', 0355},
- {'^', 'I', 0316}, {'^', 'i', 0356},
- {'"', 'I', 0317}, {'"', 'i', 0357},
- {'-', 'D', 0320}, {'-', 'd', 0360},
- {'~', 'N', 0321}, {'~', 'n', 0361},
- {'`', 'O', 0322}, {'`', 'o', 0362},
- {'\'', 'O', 0323}, {'\'', 'o', 0363},
- {'^', 'O', 0324}, {'^', 'o', 0364},
- {'~', 'O', 0325}, {'~', 'o', 0365},
- {'"', 'O', 0326}, {'"', 'o', 0366},
- {'/', 'O', 0330}, {'/', 'o', 0370},
- {'`', 'U', 0331}, {'`', 'u', 0371},
- {'\'', 'U', 0332}, {'\'', 'u', 0372},
- {'^', 'U', 0333}, {'^', 'u', 0373},
- {'"', 'U', 0334}, {'"', 'u', 0374},
- {'\'', 'Y', 0335}, {'\'', 'y', 0375},
- {'T', 'H', 0336}, {'t', 'h', 0376},
- {'s', 's', 0337}, {'"', 'y', 0377},
- {'s', 'z', 0337}, {'i', 'j', 0377},
-};
-
-unsigned int accent_table_size = 68;
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index eb69fbadc9cb..dde6ce963a19 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -39,7 +39,6 @@
#include <asm/io.h>
#include <asm/arch/i2c.h>
#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
struct pxa_i2c {
spinlock_t lock;
@@ -945,32 +944,6 @@ static const struct i2c_algorithm i2c_pxa_pio_algorithm = {
.functionality = i2c_pxa_functionality,
};
-static void i2c_pxa_enable(struct platform_device *dev)
-{
- if (cpu_is_pxa27x()) {
- switch (dev->id) {
- case 0:
- pxa_gpio_mode(GPIO117_I2CSCL_MD);
- pxa_gpio_mode(GPIO118_I2CSDA_MD);
- break;
- case 1:
- local_irq_disable();
- PCFR |= PCFR_PI2CEN;
- local_irq_enable();
- break;
- }
- }
-}
-
-static void i2c_pxa_disable(struct platform_device *dev)
-{
- if (cpu_is_pxa27x() && dev->id == 1) {
- local_irq_disable();
- PCFR &= ~PCFR_PI2CEN;
- local_irq_enable();
- }
-}
-
#define res_len(r) ((r)->end - (r)->start + 1)
static int i2c_pxa_probe(struct platform_device *dev)
{
@@ -1036,7 +1009,6 @@ static int i2c_pxa_probe(struct platform_device *dev)
#endif
clk_enable(i2c->clk);
- i2c_pxa_enable(dev);
if (plat) {
i2c->adap.class = plat->class;
@@ -1080,7 +1052,6 @@ eadapt:
free_irq(irq, i2c);
ereqirq:
clk_disable(i2c->clk);
- i2c_pxa_disable(dev);
iounmap(i2c->reg_base);
eremap:
clk_put(i2c->clk);
@@ -1103,7 +1074,6 @@ static int __exit i2c_pxa_remove(struct platform_device *dev)
clk_disable(i2c->clk);
clk_put(i2c->clk);
- i2c_pxa_disable(dev);
iounmap(i2c->reg_base);
release_mem_region(i2c->iobase, i2c->iosize);
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index b1b45dddb17e..03a33f1b9cd3 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -72,7 +72,7 @@ struct isp1301 {
};
-/* bits in OTG_CTRL_REG */
+/* bits in OTG_CTRL */
#define OTG_XCEIV_OUTPUTS \
(OTG_ASESSVLD|OTG_BSESSEND|OTG_BSESSVLD|OTG_VBUSVLD|OTG_ID)
@@ -186,8 +186,8 @@ isp1301_clear_bits(struct isp1301 *isp, u8 reg, u8 bits)
/* operational registers */
#define ISP1301_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */
-# define MC1_SPEED_REG (1 << 0)
-# define MC1_SUSPEND_REG (1 << 1)
+# define MC1_SPEED (1 << 0)
+# define MC1_SUSPEND (1 << 1)
# define MC1_DAT_SE0 (1 << 2)
# define MC1_TRANSPARENT (1 << 3)
# define MC1_BDIS_ACON_EN (1 << 4)
@@ -274,7 +274,7 @@ static void power_down(struct isp1301 *isp)
isp->otg.state = OTG_STATE_UNDEFINED;
// isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
- isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND_REG);
+ isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND);
isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_ID_PULLDOWN);
isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
@@ -283,7 +283,7 @@ static void power_down(struct isp1301 *isp)
static void power_up(struct isp1301 *isp)
{
// isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
- isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND_REG);
+ isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND);
/* do this only when cpu is driving transceiver,
* so host won't see a low speed device...
@@ -360,6 +360,8 @@ isp1301_defer_work(struct isp1301 *isp, int work)
/* called from irq handlers */
static void a_idle(struct isp1301 *isp, const char *tag)
{
+ u32 l;
+
if (isp->otg.state == OTG_STATE_A_IDLE)
return;
@@ -373,13 +375,17 @@ static void a_idle(struct isp1301 *isp, const char *tag)
gadget_suspend(isp);
}
isp->otg.state = OTG_STATE_A_IDLE;
- isp->last_otg_ctrl = OTG_CTRL_REG = OTG_CTRL_REG & OTG_XCEIV_OUTPUTS;
+ l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
+ omap_writel(l, OTG_CTRL);
+ isp->last_otg_ctrl = l;
pr_debug(" --> %s/%s\n", state_name(isp), tag);
}
/* called from irq handlers */
static void b_idle(struct isp1301 *isp, const char *tag)
{
+ u32 l;
+
if (isp->otg.state == OTG_STATE_B_IDLE)
return;
@@ -393,7 +399,9 @@ static void b_idle(struct isp1301 *isp, const char *tag)
gadget_suspend(isp);
}
isp->otg.state = OTG_STATE_B_IDLE;
- isp->last_otg_ctrl = OTG_CTRL_REG = OTG_CTRL_REG & OTG_XCEIV_OUTPUTS;
+ l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
+ omap_writel(l, OTG_CTRL);
+ isp->last_otg_ctrl = l;
pr_debug(" --> %s/%s\n", state_name(isp), tag);
}
@@ -406,7 +414,7 @@ dump_regs(struct isp1301 *isp, const char *label)
u8 src = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE);
pr_debug("otg: %06x, %s %s, otg/%02x stat/%02x.%02x\n",
- OTG_CTRL_REG, label, state_name(isp),
+ omap_readl(OTG_CTRL), label, state_name(isp),
ctrl, status, src);
/* mode control and irq enables don't change much */
#endif
@@ -429,7 +437,7 @@ dump_regs(struct isp1301 *isp, const char *label)
static void check_state(struct isp1301 *isp, const char *tag)
{
enum usb_otg_state state = OTG_STATE_UNDEFINED;
- u8 fsm = OTG_TEST_REG & 0x0ff;
+ u8 fsm = omap_readw(OTG_TEST) & 0x0ff;
unsigned extra = 0;
switch (fsm) {
@@ -494,7 +502,8 @@ static void check_state(struct isp1301 *isp, const char *tag)
if (isp->otg.state == state && !extra)
return;
pr_debug("otg: %s FSM %s/%02x, %s, %06x\n", tag,
- state_string(state), fsm, state_name(isp), OTG_CTRL_REG);
+ state_string(state), fsm, state_name(isp),
+ omap_readl(OTG_CTRL));
}
#else
@@ -508,10 +517,11 @@ static void update_otg1(struct isp1301 *isp, u8 int_src)
{
u32 otg_ctrl;
- otg_ctrl = OTG_CTRL_REG
- & OTG_CTRL_MASK
- & ~OTG_XCEIV_INPUTS
- & ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD);
+ otg_ctrl = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
+ otg_ctrl &= ~OTG_XCEIV_INPUTS;
+ otg_ctrl &= ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD);
+
+
if (int_src & INTR_SESS_VLD)
otg_ctrl |= OTG_ASESSVLD;
else if (isp->otg.state == OTG_STATE_A_WAIT_VFALL) {
@@ -534,7 +544,7 @@ static void update_otg1(struct isp1301 *isp, u8 int_src)
return;
}
}
- OTG_CTRL_REG = otg_ctrl;
+ omap_writel(otg_ctrl, OTG_CTRL);
}
/* outputs from ISP1301_OTG_STATUS */
@@ -542,15 +552,14 @@ static void update_otg2(struct isp1301 *isp, u8 otg_status)
{
u32 otg_ctrl;
- otg_ctrl = OTG_CTRL_REG
- & OTG_CTRL_MASK
- & ~OTG_XCEIV_INPUTS
- & ~(OTG_BSESSVLD|OTG_BSESSEND);
+ otg_ctrl = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
+ otg_ctrl &= ~OTG_XCEIV_INPUTS;
+ otg_ctrl &= ~(OTG_BSESSVLD | OTG_BSESSEND);
if (otg_status & OTG_B_SESS_VLD)
otg_ctrl |= OTG_BSESSVLD;
else if (otg_status & OTG_B_SESS_END)
otg_ctrl |= OTG_BSESSEND;
- OTG_CTRL_REG = otg_ctrl;
+ omap_writel(otg_ctrl, OTG_CTRL);
}
/* inputs going to ISP1301 */
@@ -559,7 +568,7 @@ static void otg_update_isp(struct isp1301 *isp)
u32 otg_ctrl, otg_change;
u8 set = OTG1_DM_PULLDOWN, clr = OTG1_DM_PULLUP;
- otg_ctrl = OTG_CTRL_REG;
+ otg_ctrl = omap_readl(OTG_CTRL);
otg_change = otg_ctrl ^ isp->last_otg_ctrl;
isp->last_otg_ctrl = otg_ctrl;
otg_ctrl = otg_ctrl & OTG_XCEIV_INPUTS;
@@ -639,6 +648,8 @@ pulldown:
/* HNP switch to host or peripheral; and SRP */
if (otg_change & OTG_PULLUP) {
+ u32 l;
+
switch (isp->otg.state) {
case OTG_STATE_B_IDLE:
if (clr & OTG1_DP_PULLUP)
@@ -655,7 +666,9 @@ pulldown:
default:
break;
}
- OTG_CTRL_REG |= OTG_PULLUP;
+ l = omap_readl(OTG_CTRL);
+ l |= OTG_PULLUP;
+ omap_writel(l, OTG_CTRL);
}
check_state(isp, __func__);
@@ -664,20 +677,20 @@ pulldown:
static irqreturn_t omap_otg_irq(int irq, void *_isp)
{
- u16 otg_irq = OTG_IRQ_SRC_REG;
+ u16 otg_irq = omap_readw(OTG_IRQ_SRC);
u32 otg_ctrl;
int ret = IRQ_NONE;
struct isp1301 *isp = _isp;
/* update ISP1301 transciever from OTG controller */
if (otg_irq & OPRT_CHG) {
- OTG_IRQ_SRC_REG = OPRT_CHG;
+ omap_writew(OPRT_CHG, OTG_IRQ_SRC);
isp1301_defer_work(isp, WORK_UPDATE_ISP);
ret = IRQ_HANDLED;
/* SRP to become b_peripheral failed */
} else if (otg_irq & B_SRP_TMROUT) {
- pr_debug("otg: B_SRP_TIMEOUT, %06x\n", OTG_CTRL_REG);
+ pr_debug("otg: B_SRP_TIMEOUT, %06x\n", omap_readl(OTG_CTRL));
notresponding(isp);
/* gadget drivers that care should monitor all kinds of
@@ -687,31 +700,31 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
if (isp->otg.state == OTG_STATE_B_SRP_INIT)
b_idle(isp, "srp_timeout");
- OTG_IRQ_SRC_REG = B_SRP_TMROUT;
+ omap_writew(B_SRP_TMROUT, OTG_IRQ_SRC);
ret = IRQ_HANDLED;
/* HNP to become b_host failed */
} else if (otg_irq & B_HNP_FAIL) {
pr_debug("otg: %s B_HNP_FAIL, %06x\n",
- state_name(isp), OTG_CTRL_REG);
+ state_name(isp), omap_readl(OTG_CTRL));
notresponding(isp);
- otg_ctrl = OTG_CTRL_REG;
+ otg_ctrl = omap_readl(OTG_CTRL);
otg_ctrl |= OTG_BUSDROP;
otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
- OTG_CTRL_REG = otg_ctrl;
+ omap_writel(otg_ctrl, OTG_CTRL);
/* subset of b_peripheral()... */
isp->otg.state = OTG_STATE_B_PERIPHERAL;
pr_debug(" --> b_peripheral\n");
- OTG_IRQ_SRC_REG = B_HNP_FAIL;
+ omap_writew(B_HNP_FAIL, OTG_IRQ_SRC);
ret = IRQ_HANDLED;
/* detect SRP from B-device ... */
} else if (otg_irq & A_SRP_DETECT) {
pr_debug("otg: %s SRP_DETECT, %06x\n",
- state_name(isp), OTG_CTRL_REG);
+ state_name(isp), omap_readl(OTG_CTRL));
isp1301_defer_work(isp, WORK_UPDATE_OTG);
switch (isp->otg.state) {
@@ -719,49 +732,49 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
if (!isp->otg.host)
break;
isp1301_defer_work(isp, WORK_HOST_RESUME);
- otg_ctrl = OTG_CTRL_REG;
+ otg_ctrl = omap_readl(OTG_CTRL);
otg_ctrl |= OTG_A_BUSREQ;
otg_ctrl &= ~(OTG_BUSDROP|OTG_B_BUSREQ)
& ~OTG_XCEIV_INPUTS
& OTG_CTRL_MASK;
- OTG_CTRL_REG = otg_ctrl;
+ omap_writel(otg_ctrl, OTG_CTRL);
break;
default:
break;
}
- OTG_IRQ_SRC_REG = A_SRP_DETECT;
+ omap_writew(A_SRP_DETECT, OTG_IRQ_SRC);
ret = IRQ_HANDLED;
/* timer expired: T(a_wait_bcon) and maybe T(a_wait_vrise)
* we don't track them separately
*/
} else if (otg_irq & A_REQ_TMROUT) {
- otg_ctrl = OTG_CTRL_REG;
+ otg_ctrl = omap_readl(OTG_CTRL);
pr_info("otg: BCON_TMOUT from %s, %06x\n",
state_name(isp), otg_ctrl);
notresponding(isp);
otg_ctrl |= OTG_BUSDROP;
otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
- OTG_CTRL_REG = otg_ctrl;
+ omap_writel(otg_ctrl, OTG_CTRL);
isp->otg.state = OTG_STATE_A_WAIT_VFALL;
- OTG_IRQ_SRC_REG = A_REQ_TMROUT;
+ omap_writew(A_REQ_TMROUT, OTG_IRQ_SRC);
ret = IRQ_HANDLED;
/* A-supplied voltage fell too low; overcurrent */
} else if (otg_irq & A_VBUS_ERR) {
- otg_ctrl = OTG_CTRL_REG;
+ otg_ctrl = omap_readl(OTG_CTRL);
printk(KERN_ERR "otg: %s, VBUS_ERR %04x ctrl %06x\n",
state_name(isp), otg_irq, otg_ctrl);
otg_ctrl |= OTG_BUSDROP;
otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
- OTG_CTRL_REG = otg_ctrl;
+ omap_writel(otg_ctrl, OTG_CTRL);
isp->otg.state = OTG_STATE_A_VBUS_ERR;
- OTG_IRQ_SRC_REG = A_VBUS_ERR;
+ omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
ret = IRQ_HANDLED;
/* switch driver; the transciever code activates it,
@@ -770,7 +783,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
} else if (otg_irq & DRIVER_SWITCH) {
int kick = 0;
- otg_ctrl = OTG_CTRL_REG;
+ otg_ctrl = omap_readl(OTG_CTRL);
printk(KERN_NOTICE "otg: %s, SWITCH to %s, ctrl %06x\n",
state_name(isp),
(otg_ctrl & OTG_DRIVER_SEL)
@@ -793,7 +806,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
} else {
if (!(otg_ctrl & OTG_ID)) {
otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
- OTG_CTRL_REG = otg_ctrl | OTG_A_BUSREQ;
+ omap_writel(otg_ctrl | OTG_A_BUSREQ, OTG_CTRL);
}
if (isp->otg.host) {
@@ -818,7 +831,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
}
}
- OTG_IRQ_SRC_REG = DRIVER_SWITCH;
+ omap_writew(DRIVER_SWITCH, OTG_IRQ_SRC);
ret = IRQ_HANDLED;
if (kick)
@@ -834,12 +847,15 @@ static struct platform_device *otg_dev;
static int otg_init(struct isp1301 *isp)
{
+ u32 l;
+
if (!otg_dev)
return -ENODEV;
dump_regs(isp, __func__);
/* some of these values are board-specific... */
- OTG_SYSCON_2_REG |= OTG_EN
+ l = omap_readl(OTG_SYSCON_2);
+ l |= OTG_EN
/* for B-device: */
| SRP_GPDATA /* 9msec Bdev D+ pulse */
| SRP_GPDVBUS /* discharge after VBUS pulse */
@@ -849,18 +865,22 @@ static int otg_init(struct isp1301 *isp)
| SRP_DPW /* detect 167+ns SRP pulses */
| SRP_DATA | SRP_VBUS /* accept both kinds of SRP pulse */
;
+ omap_writel(l, OTG_SYSCON_2);
update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE));
update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS));
check_state(isp, __func__);
pr_debug("otg: %s, %s %06x\n",
- state_name(isp), __func__, OTG_CTRL_REG);
+ state_name(isp), __func__, omap_readl(OTG_CTRL));
- OTG_IRQ_EN_REG = DRIVER_SWITCH | OPRT_CHG
+ omap_writew(DRIVER_SWITCH | OPRT_CHG
| B_SRP_TMROUT | B_HNP_FAIL
- | A_VBUS_ERR | A_SRP_DETECT | A_REQ_TMROUT;
- OTG_SYSCON_2_REG |= OTG_EN;
+ | A_VBUS_ERR | A_SRP_DETECT | A_REQ_TMROUT, OTG_IRQ_EN);
+
+ l = omap_readl(OTG_SYSCON_2);
+ l |= OTG_EN;
+ omap_writel(l, OTG_SYSCON_2);
return 0;
}
@@ -927,7 +947,11 @@ static void otg_unbind(struct isp1301 *isp)
static void b_peripheral(struct isp1301 *isp)
{
- OTG_CTRL_REG = OTG_CTRL_REG & OTG_XCEIV_OUTPUTS;
+ u32 l;
+
+ l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
+ omap_writel(l, OTG_CTRL);
+
usb_gadget_vbus_connect(isp->otg.gadget);
#ifdef CONFIG_USB_OTG
@@ -999,6 +1023,8 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
isp_bstat = 0;
}
} else {
+ u32 l;
+
/* if user unplugged mini-A end of cable,
* don't bypass A_WAIT_VFALL.
*/
@@ -1019,8 +1045,9 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1,
MC1_BDIS_ACON_EN);
isp->otg.state = OTG_STATE_B_IDLE;
- OTG_CTRL_REG &= OTG_CTRL_REG & OTG_CTRL_MASK
- & ~OTG_CTRL_BITS;
+ l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
+ l &= ~OTG_CTRL_BITS;
+ omap_writel(l, OTG_CTRL);
break;
case OTG_STATE_B_IDLE:
break;
@@ -1046,7 +1073,8 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
/* FALLTHROUGH */
case OTG_STATE_B_SRP_INIT:
b_idle(isp, __func__);
- OTG_CTRL_REG &= OTG_CTRL_REG & OTG_XCEIV_OUTPUTS;
+ l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
+ omap_writel(l, OTG_CTRL);
/* FALLTHROUGH */
case OTG_STATE_B_IDLE:
if (isp->otg.gadget && (isp_bstat & OTG_B_SESS_VLD)) {
@@ -1130,11 +1158,11 @@ isp1301_work(struct work_struct *work)
case OTG_STATE_A_WAIT_VRISE:
isp->otg.state = OTG_STATE_A_HOST;
pr_debug(" --> a_host\n");
- otg_ctrl = OTG_CTRL_REG;
+ otg_ctrl = omap_readl(OTG_CTRL);
otg_ctrl |= OTG_A_BUSREQ;
otg_ctrl &= ~(OTG_BUSDROP|OTG_B_BUSREQ)
& OTG_CTRL_MASK;
- OTG_CTRL_REG = otg_ctrl;
+ omap_writel(otg_ctrl, OTG_CTRL);
break;
case OTG_STATE_B_WAIT_ACON:
isp->otg.state = OTG_STATE_B_HOST;
@@ -1274,7 +1302,7 @@ isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host)
return -ENODEV;
if (!host) {
- OTG_IRQ_EN_REG = 0;
+ omap_writew(0, OTG_IRQ_EN);
power_down(isp);
isp->otg.host = 0;
return 0;
@@ -1325,12 +1353,13 @@ static int
isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
{
struct isp1301 *isp = container_of(otg, struct isp1301, otg);
+ u32 l;
if (!otg || isp != the_transceiver)
return -ENODEV;
if (!gadget) {
- OTG_IRQ_EN_REG = 0;
+ omap_writew(0, OTG_IRQ_EN);
if (!isp->otg.default_a)
enable_vbus_draw(isp, 0);
usb_gadget_vbus_disconnect(isp->otg.gadget);
@@ -1351,9 +1380,11 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
isp->otg.gadget = gadget;
// FIXME update its refcount
- OTG_CTRL_REG = (OTG_CTRL_REG & OTG_CTRL_MASK
- & ~(OTG_XCEIV_OUTPUTS|OTG_CTRL_BITS))
- | OTG_ID;
+ l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
+ l &= ~(OTG_XCEIV_OUTPUTS|OTG_CTRL_BITS);
+ l |= OTG_ID;
+ omap_writel(l, OTG_CTRL);
+
power_up(isp);
isp->otg.state = OTG_STATE_B_IDLE;
@@ -1405,16 +1436,17 @@ isp1301_start_srp(struct otg_transceiver *dev)
|| isp->otg.state != OTG_STATE_B_IDLE)
return -ENODEV;
- otg_ctrl = OTG_CTRL_REG;
+ otg_ctrl = omap_readl(OTG_CTRL);
if (!(otg_ctrl & OTG_BSESSEND))
return -EINVAL;
otg_ctrl |= OTG_B_BUSREQ;
otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK;
- OTG_CTRL_REG = otg_ctrl;
+ omap_writel(otg_ctrl, OTG_CTRL);
isp->otg.state = OTG_STATE_B_SRP_INIT;
- pr_debug("otg: SRP, %s ... %06x\n", state_name(isp), OTG_CTRL_REG);
+ pr_debug("otg: SRP, %s ... %06x\n", state_name(isp),
+ omap_readl(OTG_CTRL));
#ifdef CONFIG_USB_OTG
check_state(isp, __func__);
#endif
@@ -1426,6 +1458,7 @@ isp1301_start_hnp(struct otg_transceiver *dev)
{
#ifdef CONFIG_USB_OTG
struct isp1301 *isp = container_of(dev, struct isp1301, otg);
+ u32 l;
if (!dev || isp != the_transceiver)
return -ENODEV;
@@ -1452,7 +1485,9 @@ isp1301_start_hnp(struct otg_transceiver *dev)
#endif
/* caller must suspend then clear A_BUSREQ */
usb_gadget_vbus_connect(isp->otg.gadget);
- OTG_CTRL_REG |= OTG_A_SETB_HNPEN;
+ l = omap_readl(OTG_CTRL);
+ l |= OTG_A_SETB_HNPEN;
+ omap_writel(l, OTG_CTRL);
break;
case OTG_STATE_A_PERIPHERAL:
@@ -1462,7 +1497,7 @@ isp1301_start_hnp(struct otg_transceiver *dev)
return -EILSEQ;
}
pr_debug("otg: HNP %s, %06x ...\n",
- state_name(isp), OTG_CTRL_REG);
+ state_name(isp), omap_readl(OTG_CTRL));
check_state(isp, __func__);
return 0;
#else
diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index 95f33e87a99c..eed211b2ac70 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -42,6 +42,7 @@
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <linux/delay.h>
+#include <linux/clk.h>
#include <asm/dma.h>
#include <asm/io.h>
@@ -92,6 +93,8 @@ struct imxmci_host {
unsigned char actual_bus_width;
int prev_cmd_code;
+
+ struct clk *clk;
};
#define IMXMCI_PEND_IRQ_b 0
@@ -841,7 +844,7 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
/* The prescaler is 5 for PERCLK2 equal to 96MHz
* then 96MHz / 5 = 19.2 MHz
*/
- clk=imx_get_perclk2();
+ clk = clk_get_rate(host->clk);
prescaler=(clk+(CLK_RATE*7)/8)/CLK_RATE;
switch(prescaler) {
case 0:
@@ -994,6 +997,13 @@ static int imxmci_probe(struct platform_device *pdev)
host->res = r;
host->irq = irq;
+ host->clk = clk_get(&pdev->dev, "perclk2");
+ if (IS_ERR(host->clk)) {
+ ret = PTR_ERR(host->clk);
+ goto out;
+ }
+ clk_enable(host->clk);
+
imx_gpio_mode(PB8_PF_SD_DAT0);
imx_gpio_mode(PB9_PF_SD_DAT1);
imx_gpio_mode(PB10_PF_SD_DAT2);
@@ -1017,8 +1027,8 @@ static int imxmci_probe(struct platform_device *pdev)
host->imask = IMXMCI_INT_MASK_DEFAULT;
MMC_INT_MASK = host->imask;
-
- if(imx_dma_request_by_prio(&host->dma, DRIVER_NAME, DMA_PRIO_LOW)<0){
+ host->dma = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_LOW);
+ if(host->dma < 0) {
dev_err(mmc_dev(host->mmc), "imx_dma_request_by_prio failed\n");
ret = -EBUSY;
goto out;
@@ -1053,6 +1063,10 @@ out:
imx_dma_free(host->dma);
host->dma_allocated=0;
}
+ if (host->clk) {
+ clk_disable(host->clk);
+ clk_put(host->clk);
+ }
}
if (mmc)
mmc_free_host(mmc);
@@ -1082,6 +1096,9 @@ static int imxmci_remove(struct platform_device *pdev)
tasklet_kill(&host->tasklet);
+ clk_disable(host->clk);
+ clk_put(host->clk);
+
release_resource(host->res);
mmc_free_host(mmc);
diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c
index c12d8056bebd..68eec6c6c517 100644
--- a/drivers/mtd/maps/omap_nor.c
+++ b/drivers/mtd/maps/omap_nor.c
@@ -60,13 +60,22 @@ struct omapflash_info {
static void omap_set_vpp(struct map_info *map, int enable)
{
static int count;
-
- if (enable) {
- if (count++ == 0)
- OMAP_EMIFS_CONFIG_REG |= OMAP_EMIFS_CONFIG_WP;
- } else {
- if (count && (--count == 0))
- OMAP_EMIFS_CONFIG_REG &= ~OMAP_EMIFS_CONFIG_WP;
+ u32 l;
+
+ if (cpu_class_is_omap1()) {
+ if (enable) {
+ if (count++ == 0) {
+ l = omap_readl(EMIFS_CONFIG);
+ l |= OMAP_EMIFS_CONFIG_WP;
+ omap_writel(l, EMIFS_CONFIG);
+ }
+ } else {
+ if (count && (--count == 0)) {
+ l = omap_readl(EMIFS_CONFIG);
+ l &= ~OMAP_EMIFS_CONFIG_WP;
+ omap_writel(l, EMIFS_CONFIG);
+ }
+ }
}
}
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index 59e05a1c50cf..ee2ac3948cd8 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -85,6 +85,9 @@ static int __init orion_nand_probe(struct platform_device *pdev)
nc->cmd_ctrl = orion_nand_cmd_ctrl;
nc->ecc.mode = NAND_ECC_SOFT;
+ if (board->chip_delay)
+ nc->chip_delay = board->chip_delay;
+
if (board->width == 16)
nc->options |= NAND_BUSWIDTH_16;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f4182cfffe9d..45a41b597da9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -217,7 +217,7 @@ config MII
config MACB
tristate "Atmel MACB support"
- depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91CAP9
+ depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91CAP9
select PHYLIB
help
The Atmel MACB ethernet interface is found on many AT32 and AT91
diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c
index 00081d2b9cd5..e9d15eccad08 100644
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/arm/etherh.c
@@ -647,7 +647,7 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
struct ei_device *ei_local;
struct net_device *dev;
struct etherh_priv *eh;
- int i, ret;
+ int ret;
DECLARE_MAC_BUF(mac);
etherh_banner();
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index d5c2d27f3ea4..f76b0b6c277d 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -13,16 +13,8 @@
*
*/
#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/errno.h>
#include <linux/netdevice.h>
-#include <linux/slab.h>
-#include <linux/rtnetlink.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
-#include <linux/pm.h>
#include <linux/clk.h>
#include <net/irda/irda.h>
@@ -30,17 +22,9 @@
#include <net/irda/wrapper.h>
#include <net/irda/irda_device.h>
-#include <asm/irq.h>
#include <asm/dma.h>
-#include <asm/delay.h>
-#include <asm/hardware.h>
#include <asm/arch/irda.h>
#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-
-#ifdef CONFIG_MACH_MAINSTONE
-#include <asm/arch/mainstone.h>
-#endif
#define IrSR_RXPL_NEG_IS_ZERO (1<<4)
#define IrSR_RXPL_POS_IS_ZERO 0x0
@@ -163,10 +147,6 @@ static int pxa_irda_set_speed(struct pxa_irda *si, int speed)
/* set board transceiver to SIR mode */
si->pdata->transceiver_mode(si->dev, IR_SIRMODE);
- /* configure GPIO46/47 */
- pxa_gpio_mode(GPIO46_STRXD_MD);
- pxa_gpio_mode(GPIO47_STTXD_MD);
-
/* enable the STUART clock */
pxa_irda_enable_sirclk(si);
}
@@ -201,10 +181,6 @@ static int pxa_irda_set_speed(struct pxa_irda *si, int speed)
/* set board transceiver to FIR mode */
si->pdata->transceiver_mode(si->dev, IR_FIRMODE);
- /* configure GPIO46/47 */
- pxa_gpio_mode(GPIO46_ICPRXD_MD);
- pxa_gpio_mode(GPIO47_ICPTXD_MD);
-
/* enable the FICP clock */
pxa_irda_enable_firclk(si);
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index 46314b420765..569b746b5731 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -38,19 +38,19 @@
#define CF_BASE 0xfffe2800
/* status; read after IRQ */
-#define CF_STATUS_REG __REG16(CF_BASE + 0x00)
+#define CF_STATUS (CF_BASE + 0x00)
# define CF_STATUS_BAD_READ (1 << 2)
# define CF_STATUS_BAD_WRITE (1 << 1)
# define CF_STATUS_CARD_DETECT (1 << 0)
/* which chipselect (CS0..CS3) is used for CF (active low) */
-#define CF_CFG_REG __REG16(CF_BASE + 0x02)
+#define CF_CFG (CF_BASE + 0x02)
/* card reset */
-#define CF_CONTROL_REG __REG16(CF_BASE + 0x04)
+#define CF_CONTROL (CF_BASE + 0x04)
# define CF_CONTROL_RESET (1 << 0)
-#define omap_cf_present() (!(CF_STATUS_REG & CF_STATUS_CARD_DETECT))
+#define omap_cf_present() (!(omap_readw(CF_STATUS) & CF_STATUS_CARD_DETECT))
/*--------------------------------------------------------------------------*/
@@ -139,11 +139,11 @@ omap_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s)
return -EINVAL;
}
- control = CF_CONTROL_REG;
+ control = omap_readw(CF_CONTROL);
if (s->flags & SS_RESET)
- CF_CONTROL_REG = CF_CONTROL_RESET;
+ omap_writew(CF_CONTROL_RESET, CF_CONTROL);
else
- CF_CONTROL_REG = 0;
+ omap_writew(0, CF_CONTROL);
pr_debug("%s: Vcc %d, io_irq %d, flags %04x csc %04x\n",
driver_name, s->Vcc, s->io_irq, s->flags, s->csc_mask);
@@ -270,7 +270,7 @@ static int __init omap_cf_probe(struct platform_device *pdev)
omap_cfg_reg(V10_1610_CF_IREQ);
omap_cfg_reg(W10_1610_CF_RESET);
- CF_CFG_REG = ~(1 << seg);
+ omap_writew(~(1 << seg), CF_CFG);
pr_info("%s: cs%d on irq %d\n", driver_name, seg, irq);
@@ -279,14 +279,15 @@ static int __init omap_cf_probe(struct platform_device *pdev)
* CF/PCMCIA variants...
*/
pr_debug("%s: cs%d, previous ccs %08x acs %08x\n", driver_name,
- seg, EMIFS_CCS(seg), EMIFS_ACS(seg));
- EMIFS_CCS(seg) = 0x0004a1b3; /* synch mode 4 etc */
- EMIFS_ACS(seg) = 0x00000000; /* OE hold/setup */
+ seg, omap_readl(EMIFS_CCS(seg)), omap_readl(EMIFS_ACS(seg)));
+ omap_writel(0x0004a1b3, EMIFS_CCS(seg)); /* synch mode 4 etc */
+ omap_writel(0x00000000, EMIFS_ACS(seg)); /* OE hold/setup */
/* CF uses armxor_ck, which is "always" available */
pr_debug("%s: sts %04x cfg %04x control %04x %s\n", driver_name,
- CF_STATUS_REG, CF_CFG_REG, CF_CONTROL_REG,
+ omap_readw(CF_STATUS), omap_readw(CF_CFG),
+ omap_readw(CF_CONTROL),
omap_cf_present() ? "present" : "(not present)");
cf->socket.owner = THIS_MODULE;
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
index e7ab060ff118..f123fce65f2e 100644
--- a/drivers/pcmcia/pxa2xx_cm_x270.c
+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
@@ -18,6 +18,7 @@
#include <pcmcia/ss.h>
#include <asm/hardware.h>
+#include <asm/mach-types.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
@@ -130,7 +131,7 @@ static void cmx270_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
}
-static struct pcmcia_low_level cmx270_pcmcia_ops = {
+static struct pcmcia_low_level cmx270_pcmcia_ops __initdata = {
.owner = THIS_MODULE,
.hw_init = cmx270_pcmcia_hw_init,
.hw_shutdown = cmx270_pcmcia_shutdown,
@@ -147,15 +148,21 @@ static int __init cmx270_pcmcia_init(void)
{
int ret;
+ if (!machine_is_armcore())
+ return -ENODEV;
+
cmx270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
if (!cmx270_pcmcia_device)
return -ENOMEM;
- cmx270_pcmcia_device->dev.platform_data = &cmx270_pcmcia_ops;
+ ret = platform_device_add_data(cmx270_pcmcia_device, &cmx270_pcmcia_ops,
+ sizeof(cmx270_pcmcia_ops));
- printk(KERN_INFO "Registering cm-x270 PCMCIA interface.\n");
- ret = platform_device_add(cmx270_pcmcia_device);
+ if (ret == 0) {
+ printk(KERN_INFO "Registering cm-x270 PCMCIA interface.\n");
+ ret = platform_device_add(cmx270_pcmcia_device);
+ }
if (ret)
platform_device_put(cmx270_pcmcia_device);
diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c
index 145b85e0f02c..92d1cc33808c 100644
--- a/drivers/pcmcia/pxa2xx_mainstone.c
+++ b/drivers/pcmcia/pxa2xx_mainstone.c
@@ -22,6 +22,7 @@
#include <pcmcia/ss.h>
#include <asm/hardware.h>
+#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/arch/pxa-regs.h>
@@ -136,7 +137,7 @@ static void mst_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
{
}
-static struct pcmcia_low_level mst_pcmcia_ops = {
+static struct pcmcia_low_level mst_pcmcia_ops __initdata = {
.owner = THIS_MODULE,
.hw_init = mst_pcmcia_hw_init,
.hw_shutdown = mst_pcmcia_hw_shutdown,
@@ -153,13 +154,17 @@ static int __init mst_pcmcia_init(void)
{
int ret;
+ if (!machine_is_mainstone())
+ return -ENODEV;
+
mst_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
if (!mst_pcmcia_device)
return -ENOMEM;
- mst_pcmcia_device->dev.platform_data = &mst_pcmcia_ops;
-
- ret = platform_device_add(mst_pcmcia_device);
+ ret = platform_device_add_data(mst_pcmcia_device, &mst_pcmcia_ops,
+ sizeof(mst_pcmcia_ops));
+ if (ret == 0)
+ ret = platform_device_add(mst_pcmcia_device);
if (ret)
platform_device_put(mst_pcmcia_device);
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index d5c33bd78d68..d71f93d45833 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -222,7 +222,7 @@ static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
sharpsl_pcmcia_init_reset(skt);
}
-static struct pcmcia_low_level sharpsl_pcmcia_ops = {
+static struct pcmcia_low_level sharpsl_pcmcia_ops __initdata = {
.owner = THIS_MODULE,
.hw_init = sharpsl_pcmcia_hw_init,
.hw_shutdown = sharpsl_pcmcia_hw_shutdown,
@@ -261,10 +261,12 @@ static int __init sharpsl_pcmcia_init(void)
if (!sharpsl_pcmcia_device)
return -ENOMEM;
- sharpsl_pcmcia_device->dev.platform_data = &sharpsl_pcmcia_ops;
- sharpsl_pcmcia_device->dev.parent = platform_scoop_config->devs[0].dev;
-
- ret = platform_device_add(sharpsl_pcmcia_device);
+ ret = platform_device_add_data(sharpsl_pcmcia_device,
+ &sharpsl_pcmcia_ops, sizeof(sharpsl_pcmcia_ops));
+ if (ret == 0) {
+ sharpsl_pcmcia_device->dev.parent = platform_scoop_config->devs[0].dev;
+ ret = platform_device_add(sharpsl_pcmcia_device);
+ }
if (ret)
platform_device_put(sharpsl_pcmcia_device);
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 4949dc4859be..fc85bf2e4a97 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -469,6 +469,16 @@ config RTC_DRV_VR41XX
To compile this driver as a module, choose M here: the
module will be called rtc-vr41xx.
+config RTC_DRV_PL030
+ tristate "ARM AMBA PL030 RTC"
+ depends on ARM_AMBA
+ help
+ If you say Y here you will get access to ARM AMBA
+ PrimeCell PL030 RTC found on certain ARM SOCs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rtc-pl030.
+
config RTC_DRV_PL031
tristate "ARM AMBA PL031 RTC"
depends on ARM_AMBA
@@ -495,12 +505,13 @@ config RTC_DRV_AT91RM9200
this is powered by the backup power supply.
config RTC_DRV_AT91SAM9
- tristate "AT91SAM9x"
+ tristate "AT91SAM9x/AT91CAP9"
depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40)
help
- RTC driver for the Atmel AT91SAM9x internal RTT (Real Time Timer).
- These timers are powered by the backup power supply (such as a
- small coin cell battery), but do not need to be used as RTCs.
+ RTC driver for the Atmel AT91SAM9x and AT91CAP9 internal RTT
+ (Real Time Timer). These timers are powered by the backup power
+ supply (such as a small coin cell battery), but do not need to
+ be used as RTCs.
(On AT91SAM9rl chips you probably want to use the dedicated RTC
module and leave the RTT available for other uses.)
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index b6e14d51670b..b5d9d67df887 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o
obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o
obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o
obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o
+obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030.o
obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o
obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o
obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index 39e64ab1ecb7..9c3db934cc24 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -29,10 +29,6 @@
#include <linux/completion.h>
#include <asm/uaccess.h>
-#include <asm/rtc.h>
-
-#include <asm/mach/time.h>
-
#include <asm/arch/at91_rtc.h>
diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index 38d8742a4bdf..f0246ef413a4 100644
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -19,7 +19,6 @@
#include <linux/interrupt.h>
#include <linux/ioctl.h>
-#include <asm/mach/time.h>
#include <asm/arch/board.h>
#include <asm/arch/at91_rtt.h>
diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
index 58f81c774943..eb23d8423f42 100644
--- a/drivers/rtc/rtc-omap.c
+++ b/drivers/rtc/rtc-omap.c
@@ -22,7 +22,6 @@
#include <linux/platform_device.h>
#include <asm/io.h>
-#include <asm/mach/time.h>
/* The OMAP1 RTC is a year/month/day/hours/minutes/seconds BCD clock
diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c
new file mode 100644
index 000000000000..8448eeb9d675
--- /dev/null
+++ b/drivers/rtc/rtc-pl030.c
@@ -0,0 +1,217 @@
+/*
+ * linux/drivers/rtc/rtc-pl030.c
+ *
+ * Copyright (C) 2000-2001 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+
+#define RTC_DR (0)
+#define RTC_MR (4)
+#define RTC_STAT (8)
+#define RTC_EOI (8)
+#define RTC_LR (12)
+#define RTC_CR (16)
+#define RTC_CR_MIE (1 << 0)
+
+struct pl030_rtc {
+ struct rtc_device *rtc;
+ void __iomem *base;
+};
+
+static irqreturn_t pl030_interrupt(int irq, void *dev_id)
+{
+ struct pl030_rtc *rtc = dev_id;
+ writel(0, rtc->base + RTC_EOI);
+ return IRQ_HANDLED;
+}
+
+static int pl030_open(struct device *dev)
+{
+ return 0;
+}
+
+static void pl030_release(struct device *dev)
+{
+}
+
+static int pl030_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+ return -ENOIOCTLCMD;
+}
+
+static int pl030_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct pl030_rtc *rtc = dev_get_drvdata(dev);
+
+ rtc_time_to_tm(readl(rtc->base + RTC_MR), &alrm->time);
+ return 0;
+}
+
+static int pl030_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct pl030_rtc *rtc = dev_get_drvdata(dev);
+ unsigned long time;
+ int ret;
+
+ /*
+ * At the moment, we can only deal with non-wildcarded alarm times.
+ */
+ ret = rtc_valid_tm(&alrm->time);
+ if (ret == 0)
+ ret = rtc_tm_to_time(&alrm->time, &time);
+ if (ret == 0)
+ writel(time, rtc->base + RTC_MR);
+ return ret;
+}
+
+static int pl030_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct pl030_rtc *rtc = dev_get_drvdata(dev);
+
+ rtc_time_to_tm(readl(rtc->base + RTC_DR), tm);
+
+ return 0;
+}
+
+/*
+ * Set the RTC time. Unfortunately, we can't accurately set
+ * the point at which the counter updates.
+ *
+ * Also, since RTC_LR is transferred to RTC_CR on next rising
+ * edge of the 1Hz clock, we must write the time one second
+ * in advance.
+ */
+static int pl030_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct pl030_rtc *rtc = dev_get_drvdata(dev);
+ unsigned long time;
+ int ret;
+
+ ret = rtc_tm_to_time(tm, &time);
+ if (ret == 0)
+ writel(time + 1, rtc->base + RTC_LR);
+
+ return ret;
+}
+
+static const struct rtc_class_ops pl030_ops = {
+ .open = pl030_open,
+ .release = pl030_release,
+ .ioctl = pl030_ioctl,
+ .read_time = pl030_read_time,
+ .set_time = pl030_set_time,
+ .read_alarm = pl030_read_alarm,
+ .set_alarm = pl030_set_alarm,
+};
+
+static int pl030_probe(struct amba_device *dev, void *id)
+{
+ struct pl030_rtc *rtc;
+ int ret;
+
+ ret = amba_request_regions(dev, NULL);
+ if (ret)
+ goto err_req;
+
+ rtc = kmalloc(sizeof(*rtc), GFP_KERNEL);
+ if (!rtc) {
+ ret = -ENOMEM;
+ goto err_rtc;
+ }
+
+ rtc->base = ioremap(dev->res.start, SZ_4K);
+ if (!rtc->base) {
+ ret = -ENOMEM;
+ goto err_map;
+ }
+
+ __raw_writel(0, rtc->base + RTC_CR);
+ __raw_writel(0, rtc->base + RTC_EOI);
+
+ amba_set_drvdata(dev, rtc);
+
+ ret = request_irq(dev->irq[0], pl030_interrupt, IRQF_DISABLED,
+ "rtc-pl030", rtc);
+ if (ret)
+ goto err_irq;
+
+ rtc->rtc = rtc_device_register("pl030", &dev->dev, &pl030_ops,
+ THIS_MODULE);
+ if (IS_ERR(rtc->rtc)) {
+ ret = PTR_ERR(rtc->rtc);
+ goto err_reg;
+ }
+
+ return 0;
+
+ err_reg:
+ free_irq(dev->irq[0], rtc);
+ err_irq:
+ iounmap(rtc->base);
+ err_map:
+ kfree(rtc);
+ err_rtc:
+ amba_release_regions(dev);
+ err_req:
+ return ret;
+}
+
+static int pl030_remove(struct amba_device *dev)
+{
+ struct pl030_rtc *rtc = amba_get_drvdata(dev);
+
+ amba_set_drvdata(dev, NULL);
+
+ writel(0, rtc->base + RTC_CR);
+
+ free_irq(dev->irq[0], rtc);
+ rtc_device_unregister(rtc->rtc);
+ iounmap(rtc->base);
+ kfree(rtc);
+ amba_release_regions(dev);
+
+ return 0;
+}
+
+static struct amba_id pl030_ids[] = {
+ {
+ .id = 0x00041030,
+ .mask = 0x000fffff,
+ },
+ { 0, 0 },
+};
+
+static struct amba_driver pl030_driver = {
+ .drv = {
+ .name = "rtc-pl030",
+ },
+ .probe = pl030_probe,
+ .remove = pl030_remove,
+ .id_table = pl030_ids,
+};
+
+static int __init pl030_init(void)
+{
+ return amba_driver_register(&pl030_driver);
+}
+
+static void __exit pl030_exit(void)
+{
+ amba_driver_unregister(&pl030_driver);
+}
+
+module_init(pl030_init);
+module_exit(pl030_exit);
+
+MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
+MODULE_DESCRIPTION("ARM AMBA PL030 RTC Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 2fd49edcc712..08b4610ec5a6 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -12,23 +12,12 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
-#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/rtc.h>
#include <linux/init.h>
-#include <linux/fs.h>
#include <linux/interrupt.h>
-#include <linux/string.h>
-#include <linux/pm.h>
-#include <linux/bitops.h>
-
#include <linux/amba/bus.h>
-
-#include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/rtc.h>
+#include <linux/io.h>
/*
* Register definitions
@@ -142,13 +131,12 @@ static int pl031_remove(struct amba_device *adev)
{
struct pl031_local *ldata = dev_get_drvdata(&adev->dev);
- if (ldata) {
- dev_set_drvdata(&adev->dev, NULL);
- free_irq(adev->irq[0], ldata->rtc);
- rtc_device_unregister(ldata->rtc);
- iounmap(ldata->base);
- kfree(ldata);
- }
+ amba_set_drvdata(adev, NULL);
+ free_irq(adev->irq[0], ldata->rtc);
+ rtc_device_unregister(ldata->rtc);
+ iounmap(ldata->base);
+ kfree(ldata);
+ amba_release_regions(adev);
return 0;
}
@@ -158,13 +146,15 @@ static int pl031_probe(struct amba_device *adev, void *id)
int ret;
struct pl031_local *ldata;
+ ret = amba_request_regions(adev, NULL);
+ if (ret)
+ goto err_req;
ldata = kmalloc(sizeof(struct pl031_local), GFP_KERNEL);
if (!ldata) {
ret = -ENOMEM;
goto out;
}
- dev_set_drvdata(&adev->dev, ldata);
ldata->base = ioremap(adev->res.start,
adev->res.end - adev->res.start + 1);
@@ -173,6 +163,8 @@ static int pl031_probe(struct amba_device *adev, void *id)
goto out_no_remap;
}
+ amba_set_drvdata(adev, ldata);
+
if (request_irq(adev->irq[0], pl031_interrupt, IRQF_DISABLED,
"rtc-pl031", ldata->rtc)) {
ret = -EIO;
@@ -192,10 +184,12 @@ out_no_rtc:
free_irq(adev->irq[0], ldata->rtc);
out_no_irq:
iounmap(ldata->base);
+ amba_set_drvdata(adev, NULL);
out_no_remap:
- dev_set_drvdata(&adev->dev, NULL);
kfree(ldata);
out:
+ amba_release_regions(adev);
+err_req:
return ret;
}
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index f26e0cad8f16..fed86e507fdf 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -26,10 +26,6 @@
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/rtc.h>
-
-#include <asm/mach/time.h>
-
#include <asm/plat-s3c/regs-rtc.h>
/* I have yet to find an S3C implementation with more than one
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 67421b0d3a7b..f47294c60148 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -33,7 +33,6 @@
#include <asm/hardware.h>
#include <asm/irq.h>
-#include <asm/rtc.h>
#ifdef CONFIG_ARCH_PXA
#include <asm/arch/pxa-regs.h>
@@ -47,6 +46,42 @@ static unsigned long rtc_freq = 1024;
static struct rtc_time rtc_alarm;
static DEFINE_SPINLOCK(sa1100_rtc_lock);
+static inline int rtc_periodic_alarm(struct rtc_time *tm)
+{
+ return (tm->tm_year == -1) ||
+ ((unsigned)tm->tm_mon >= 12) ||
+ ((unsigned)(tm->tm_mday - 1) >= 31) ||
+ ((unsigned)tm->tm_hour > 23) ||
+ ((unsigned)tm->tm_min > 59) ||
+ ((unsigned)tm->tm_sec > 59);
+}
+
+/*
+ * Calculate the next alarm time given the requested alarm time mask
+ * and the current time.
+ */
+static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc_time *alrm)
+{
+ unsigned long next_time;
+ unsigned long now_time;
+
+ next->tm_year = now->tm_year;
+ next->tm_mon = now->tm_mon;
+ next->tm_mday = now->tm_mday;
+ next->tm_hour = alrm->tm_hour;
+ next->tm_min = alrm->tm_min;
+ next->tm_sec = alrm->tm_sec;
+
+ rtc_tm_to_time(now, &now_time);
+ rtc_tm_to_time(next, &next_time);
+
+ if (next_time < now_time) {
+ /* Advance one day */
+ next_time += 60 * 60 * 24;
+ rtc_time_to_tm(next_time, next);
+ }
+}
+
static int rtc_update_alarm(struct rtc_time *alrm)
{
struct rtc_time alarm_tm, now_tm;
diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig
index 7236143941f3..a8587f1f5e7e 100644
--- a/drivers/scsi/arm/Kconfig
+++ b/drivers/scsi/arm/Kconfig
@@ -3,7 +3,7 @@
#
config SCSI_ACORNSCSI_3
tristate "Acorn SCSI card (aka30) support"
- depends on ARCH_ACORN && SCSI && BROKEN
+ depends on ARCH_ACORN && SCSI
select SCSI_SPI_ATTRS
help
This enables support for the Acorn SCSI card (aka30). If you have an
diff --git a/drivers/scsi/arm/acornscsi-io.S b/drivers/scsi/arm/acornscsi-io.S
index 93467e6ac923..5cebe3105260 100644
--- a/drivers/scsi/arm/acornscsi-io.S
+++ b/drivers/scsi/arm/acornscsi-io.S
@@ -10,17 +10,10 @@
#include <asm/assembler.h>
#include <asm/hardware.h>
-#if (IO_BASE == (PCIO_BASE & 0xff000000))
-#define ADDR(off,reg) \
- tst off, $0x80000000 ;\
- mov reg, $IO_BASE ;\
- orreq reg, reg, $(PCIO_BASE & 0x00ff0000)
-#else
-#define ADDR(off,reg) \
- tst off, $0x80000000 ;\
- movne reg, $IO_BASE ;\
- moveq reg, $(PCIO_BASE & 0xff000000) ;\
- orreq reg, reg, $(PCIO_BASE & 0x00ff0000)
+#if defined(__APCS_32__)
+#define LOADREGS(t,r,l...) ldm##t r, l
+#elif defined(__APCS_26__)
+#define LOADREGS(t,r,l...) ldm##t r, l##^
#endif
@ Purpose: transfer a block of data from the acorn scsi card to memory
diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c
index 8e53f02cc311..918ccf818757 100644
--- a/drivers/scsi/arm/acornscsi.c
+++ b/drivers/scsi/arm/acornscsi.c
@@ -123,12 +123,6 @@
#define DBG(cmd,xxx...) xxx
#endif
-#ifndef STRINGIFY
-#define STRINGIFY(x) #x
-#endif
-#define STRx(x) STRINGIFY(x)
-#define NO_WRITE_STR STRx(NO_WRITE)
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
@@ -141,9 +135,10 @@
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/bitops.h>
+#include <linux/stringify.h>
+#include <linux/io.h>
#include <asm/system.h>
-#include <asm/io.h>
#include <asm/ecard.h>
#include "../scsi.h"
@@ -203,44 +198,46 @@ static void acornscsi_abortcmd(AS_Host *host, unsigned char tag);
* Miscellaneous
*/
-static inline void
-sbic_arm_write(unsigned int io_port, int reg, int value)
+/* Offsets from MEMC base */
+#define SBIC_REGIDX 0x2000
+#define SBIC_REGVAL 0x2004
+#define DMAC_OFFSET 0x3000
+
+/* Offsets from FAST IOC base */
+#define INT_REG 0x2000
+#define PAGE_REG 0x3000
+
+static inline void sbic_arm_write(AS_Host *host, unsigned int reg, unsigned int value)
{
- __raw_writeb(reg, io_port);
- __raw_writeb(value, io_port + 4);
+ writeb(reg, host->base + SBIC_REGIDX);
+ writeb(value, host->base + SBIC_REGVAL);
}
-#define sbic_arm_writenext(io,val) \
- __raw_writeb((val), (io) + 4)
-
-static inline
-int sbic_arm_read(unsigned int io_port, int reg)
+static inline int sbic_arm_read(AS_Host *host, unsigned int reg)
{
if(reg == SBIC_ASR)
- return __raw_readl(io_port) & 255;
- __raw_writeb(reg, io_port);
- return __raw_readl(io_port + 4) & 255;
+ return readl(host->base + SBIC_REGIDX) & 255;
+ writeb(reg, host->base + SBIC_REGIDX);
+ return readl(host->base + SBIC_REGVAL) & 255;
}
-#define sbic_arm_readnext(io) \
- __raw_readb((io) + 4)
+#define sbic_arm_writenext(host, val) writeb((val), (host)->base + SBIC_REGVAL)
+#define sbic_arm_readnext(host) readb((host)->base + SBIC_REGVAL)
#ifdef USE_DMAC
-#define dmac_read(io_port,reg) \
- inb((io_port) + (reg))
+#define dmac_read(host,reg) \
+ readb((host)->base + DMAC_OFFSET + ((reg) << 2))
-#define dmac_write(io_port,reg,value) \
- ({ outb((value), (io_port) + (reg)); })
+#define dmac_write(host,reg,value) \
+ ({ writeb((value), (host)->base + DMAC_OFFSET + ((reg) << 2)); })
-#define dmac_clearintr(io_port) \
- ({ outb(0, (io_port)); })
+#define dmac_clearintr(host) writeb(0, (host)->fast + INT_REG)
-static inline
-unsigned int dmac_address(unsigned int io_port)
+static inline unsigned int dmac_address(AS_Host *host)
{
- return dmac_read(io_port, DMAC_TXADRHI) << 16 |
- dmac_read(io_port, DMAC_TXADRMD) << 8 |
- dmac_read(io_port, DMAC_TXADRLO);
+ return dmac_read(host, DMAC_TXADRHI) << 16 |
+ dmac_read(host, DMAC_TXADRMD) << 8 |
+ dmac_read(host, DMAC_TXADRLO);
}
static
@@ -248,15 +245,15 @@ void acornscsi_dumpdma(AS_Host *host, char *where)
{
unsigned int mode, addr, len;
- mode = dmac_read(host->dma.io_port, DMAC_MODECON);
- addr = dmac_address(host->dma.io_port);
- len = dmac_read(host->dma.io_port, DMAC_TXCNTHI) << 8 |
- dmac_read(host->dma.io_port, DMAC_TXCNTLO);
+ mode = dmac_read(host, DMAC_MODECON);
+ addr = dmac_address(host);
+ len = dmac_read(host, DMAC_TXCNTHI) << 8 |
+ dmac_read(host, DMAC_TXCNTLO);
printk("scsi%d: %s: DMAC %02x @%06x+%04x msk %02x, ",
host->host->host_no, where,
mode, addr, (len + 1) & 0xffff,
- dmac_read(host->dma.io_port, DMAC_MASKREG));
+ dmac_read(host, DMAC_MASKREG));
printk("DMA @%06x, ", host->dma.start_addr);
printk("BH @%p +%04x, ", host->scsi.SCp.ptr,
@@ -272,9 +269,9 @@ unsigned long acornscsi_sbic_xfcount(AS_Host *host)
{
unsigned long length;
- length = sbic_arm_read(host->scsi.io_port, SBIC_TRANSCNTH) << 16;
- length |= sbic_arm_readnext(host->scsi.io_port) << 8;
- length |= sbic_arm_readnext(host->scsi.io_port);
+ length = sbic_arm_read(host, SBIC_TRANSCNTH) << 16;
+ length |= sbic_arm_readnext(host) << 8;
+ length |= sbic_arm_readnext(host);
return length;
}
@@ -285,7 +282,7 @@ acornscsi_sbic_wait(AS_Host *host, int stat_mask, int stat, int timeout, char *m
int asr;
do {
- asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR);
+ asr = sbic_arm_read(host, SBIC_ASR);
if ((asr & stat_mask) == stat)
return 0;
@@ -304,7 +301,7 @@ int acornscsi_sbic_issuecmd(AS_Host *host, int command)
if (acornscsi_sbic_wait(host, ASR_CIP, 0, 1000, "issuing command"))
return -1;
- sbic_arm_write(host->scsi.io_port, SBIC_CMND, command);
+ sbic_arm_write(host, SBIC_CMND, command);
return 0;
}
@@ -331,20 +328,20 @@ void acornscsi_resetcard(AS_Host *host)
/* assert reset line */
host->card.page_reg = 0x80;
- outb(host->card.page_reg, host->card.io_page);
+ writeb(host->card.page_reg, host->fast + PAGE_REG);
/* wait 3 cs. SCSI standard says 25ms. */
acornscsi_csdelay(3);
host->card.page_reg = 0;
- outb(host->card.page_reg, host->card.io_page);
+ writeb(host->card.page_reg, host->fast + PAGE_REG);
/*
* Should get a reset from the card
*/
timeout = 1000;
do {
- if (inb(host->card.io_intr) & 8)
+ if (readb(host->fast + INT_REG) & 8)
break;
udelay(1);
} while (--timeout);
@@ -353,19 +350,19 @@ void acornscsi_resetcard(AS_Host *host)
printk("scsi%d: timeout while resetting card\n",
host->host->host_no);
- sbic_arm_read(host->scsi.io_port, SBIC_ASR);
- sbic_arm_read(host->scsi.io_port, SBIC_SSR);
+ sbic_arm_read(host, SBIC_ASR);
+ sbic_arm_read(host, SBIC_SSR);
/* setup sbic - WD33C93A */
- sbic_arm_write(host->scsi.io_port, SBIC_OWNID, OWNID_EAF | host->host->this_id);
- sbic_arm_write(host->scsi.io_port, SBIC_CMND, CMND_RESET);
+ sbic_arm_write(host, SBIC_OWNID, OWNID_EAF | host->host->this_id);
+ sbic_arm_write(host, SBIC_CMND, CMND_RESET);
/*
* Command should cause a reset interrupt
*/
timeout = 1000;
do {
- if (inb(host->card.io_intr) & 8)
+ if (readb(host->fast + INT_REG) & 8)
break;
udelay(1);
} while (--timeout);
@@ -374,26 +371,26 @@ void acornscsi_resetcard(AS_Host *host)
printk("scsi%d: timeout while resetting card\n",
host->host->host_no);
- sbic_arm_read(host->scsi.io_port, SBIC_ASR);
- if (sbic_arm_read(host->scsi.io_port, SBIC_SSR) != 0x01)
+ sbic_arm_read(host, SBIC_ASR);
+ if (sbic_arm_read(host, SBIC_SSR) != 0x01)
printk(KERN_CRIT "scsi%d: WD33C93A didn't give enhanced reset interrupt\n",
host->host->host_no);
- sbic_arm_write(host->scsi.io_port, SBIC_CTRL, INIT_SBICDMA | CTRL_IDI);
- sbic_arm_write(host->scsi.io_port, SBIC_TIMEOUT, TIMEOUT_TIME);
- sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, SYNCHTRANSFER_2DBA);
- sbic_arm_write(host->scsi.io_port, SBIC_SOURCEID, SOURCEID_ER | SOURCEID_DSP);
+ sbic_arm_write(host, SBIC_CTRL, INIT_SBICDMA | CTRL_IDI);
+ sbic_arm_write(host, SBIC_TIMEOUT, TIMEOUT_TIME);
+ sbic_arm_write(host, SBIC_SYNCHTRANSFER, SYNCHTRANSFER_2DBA);
+ sbic_arm_write(host, SBIC_SOURCEID, SOURCEID_ER | SOURCEID_DSP);
host->card.page_reg = 0x40;
- outb(host->card.page_reg, host->card.io_page);
+ writeb(host->card.page_reg, host->fast + PAGE_REG);
/* setup dmac - uPC71071 */
- dmac_write(host->dma.io_port, DMAC_INIT, 0);
+ dmac_write(host, DMAC_INIT, 0);
#ifdef USE_DMAC
- dmac_write(host->dma.io_port, DMAC_INIT, INIT_8BIT);
- dmac_write(host->dma.io_port, DMAC_CHANNEL, CHANNEL_0);
- dmac_write(host->dma.io_port, DMAC_DEVCON0, INIT_DEVCON0);
- dmac_write(host->dma.io_port, DMAC_DEVCON1, INIT_DEVCON1);
+ dmac_write(host, DMAC_INIT, INIT_8BIT);
+ dmac_write(host, DMAC_CHANNEL, CHANNEL_0);
+ dmac_write(host, DMAC_DEVCON0, INIT_DEVCON0);
+ dmac_write(host, DMAC_DEVCON1, INIT_DEVCON1);
#endif
host->SCpnt = NULL;
@@ -741,9 +738,9 @@ intr_ret_t acornscsi_kick(AS_Host *host)
* If we have an interrupt pending, then we may have been reselected.
* In this case, we don't want to write to the registers
*/
- if (!(sbic_arm_read(host->scsi.io_port, SBIC_ASR) & (ASR_INT|ASR_BSY|ASR_CIP))) {
- sbic_arm_write(host->scsi.io_port, SBIC_DESTID, SCpnt->device->id);
- sbic_arm_write(host->scsi.io_port, SBIC_CMND, CMND_SELWITHATN);
+ if (!(sbic_arm_read(host, SBIC_ASR) & (ASR_INT|ASR_BSY|ASR_CIP))) {
+ sbic_arm_write(host, SBIC_DESTID, SCpnt->device->id);
+ sbic_arm_write(host, SBIC_CMND, CMND_SELWITHATN);
}
/*
@@ -807,7 +804,7 @@ static void acornscsi_done(AS_Host *host, struct scsi_cmnd **SCpntp,
struct scsi_cmnd *SCpnt = *SCpntp;
/* clean up */
- sbic_arm_write(host->scsi.io_port, SBIC_SOURCEID, SOURCEID_ER | SOURCEID_DSP);
+ sbic_arm_write(host, SBIC_SOURCEID, SOURCEID_ER | SOURCEID_DSP);
host->stats.fins += 1;
@@ -918,13 +915,13 @@ static
void acornscsi_data_read(AS_Host *host, char *ptr,
unsigned int start_addr, unsigned int length)
{
- extern void __acornscsi_in(int port, char *buf, int len);
+ extern void __acornscsi_in(void __iomem *, char *buf, int len);
unsigned int page, offset, len = length;
page = (start_addr >> 12);
offset = start_addr & ((1 << 12) - 1);
- outb((page & 0x3f) | host->card.page_reg, host->card.io_page);
+ writeb((page & 0x3f) | host->card.page_reg, host->fast + PAGE_REG);
while (len > 0) {
unsigned int this_len;
@@ -934,7 +931,7 @@ void acornscsi_data_read(AS_Host *host, char *ptr,
else
this_len = len;
- __acornscsi_in(host->card.io_ram + (offset << 1), ptr, this_len);
+ __acornscsi_in(host->base + (offset << 1), ptr, this_len);
offset += this_len;
ptr += this_len;
@@ -943,10 +940,10 @@ void acornscsi_data_read(AS_Host *host, char *ptr,
if (offset == (1 << 12)) {
offset = 0;
page ++;
- outb((page & 0x3f) | host->card.page_reg, host->card.io_page);
+ writeb((page & 0x3f) | host->card.page_reg, host->fast + PAGE_REG);
}
}
- outb(host->card.page_reg, host->card.io_page);
+ writeb(host->card.page_reg, host->fast + PAGE_REG);
}
/*
@@ -963,13 +960,13 @@ static
void acornscsi_data_write(AS_Host *host, char *ptr,
unsigned int start_addr, unsigned int length)
{
- extern void __acornscsi_out(int port, char *buf, int len);
+ extern void __acornscsi_out(void __iomem *, char *buf, int len);
unsigned int page, offset, len = length;
page = (start_addr >> 12);
offset = start_addr & ((1 << 12) - 1);
- outb((page & 0x3f) | host->card.page_reg, host->card.io_page);
+ writeb((page & 0x3f) | host->card.page_reg, host->fast + PAGE_REG);
while (len > 0) {
unsigned int this_len;
@@ -979,7 +976,7 @@ void acornscsi_data_write(AS_Host *host, char *ptr,
else
this_len = len;
- __acornscsi_out(host->card.io_ram + (offset << 1), ptr, this_len);
+ __acornscsi_out(host->base + (offset << 1), ptr, this_len);
offset += this_len;
ptr += this_len;
@@ -988,10 +985,10 @@ void acornscsi_data_write(AS_Host *host, char *ptr,
if (offset == (1 << 12)) {
offset = 0;
page ++;
- outb((page & 0x3f) | host->card.page_reg, host->card.io_page);
+ writeb((page & 0x3f) | host->card.page_reg, host->fast + PAGE_REG);
}
}
- outb(host->card.page_reg, host->card.io_page);
+ writeb(host->card.page_reg, host->fast + PAGE_REG);
}
/* =========================================================================================
@@ -1008,8 +1005,8 @@ void acornscsi_data_write(AS_Host *host, char *ptr,
static inline
void acornscsi_dma_stop(AS_Host *host)
{
- dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_ON);
- dmac_clearintr(host->dma.io_intr_clear);
+ dmac_write(host, DMAC_MASKREG, MASK_ON);
+ dmac_clearintr(host);
#if (DEBUG & DEBUG_DMA)
DBG(host->SCpnt, acornscsi_dumpdma(host, "stop"));
@@ -1031,7 +1028,7 @@ void acornscsi_dma_setup(AS_Host *host, dmadir_t direction)
host->dma.direction = direction;
- dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_ON);
+ dmac_write(host, DMAC_MASKREG, MASK_ON);
if (direction == DMA_OUT) {
#if (DEBUG & DEBUG_NO_WRITE)
@@ -1062,13 +1059,13 @@ void acornscsi_dma_setup(AS_Host *host, dmadir_t direction)
length);
length -= 1;
- dmac_write(host->dma.io_port, DMAC_TXCNTLO, length);
- dmac_write(host->dma.io_port, DMAC_TXCNTHI, length >> 8);
- dmac_write(host->dma.io_port, DMAC_TXADRLO, address);
- dmac_write(host->dma.io_port, DMAC_TXADRMD, address >> 8);
- dmac_write(host->dma.io_port, DMAC_TXADRHI, 0);
- dmac_write(host->dma.io_port, DMAC_MODECON, mode);
- dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_OFF);
+ dmac_write(host, DMAC_TXCNTLO, length);
+ dmac_write(host, DMAC_TXCNTHI, length >> 8);
+ dmac_write(host, DMAC_TXADRLO, address);
+ dmac_write(host, DMAC_TXADRMD, address >> 8);
+ dmac_write(host, DMAC_TXADRHI, 0);
+ dmac_write(host, DMAC_MODECON, mode);
+ dmac_write(host, DMAC_MASKREG, MASK_OFF);
#if (DEBUG & DEBUG_DMA)
DBG(host->SCpnt, acornscsi_dumpdma(host, "strt"));
@@ -1088,8 +1085,8 @@ void acornscsi_dma_setup(AS_Host *host, dmadir_t direction)
static
void acornscsi_dma_cleanup(AS_Host *host)
{
- dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_ON);
- dmac_clearintr(host->dma.io_intr_clear);
+ dmac_write(host, DMAC_MASKREG, MASK_ON);
+ dmac_clearintr(host);
/*
* Check for a pending transfer
@@ -1116,7 +1113,7 @@ void acornscsi_dma_cleanup(AS_Host *host)
/*
* Calculate number of bytes transferred from DMA.
*/
- transferred = dmac_address(host->dma.io_port) - host->dma.start_addr;
+ transferred = dmac_address(host) - host->dma.start_addr;
host->dma.transferred += transferred;
if (host->dma.direction == DMA_IN)
@@ -1152,13 +1149,13 @@ void acornscsi_dma_intr(AS_Host *host)
DBG(host->SCpnt, acornscsi_dumpdma(host, "inti"));
#endif
- dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_ON);
- dmac_clearintr(host->dma.io_intr_clear);
+ dmac_write(host, DMAC_MASKREG, MASK_ON);
+ dmac_clearintr(host);
/*
* Calculate amount transferred via DMA
*/
- transferred = dmac_address(host->dma.io_port) - host->dma.start_addr;
+ transferred = dmac_address(host) - host->dma.start_addr;
host->dma.transferred += transferred;
/*
@@ -1190,12 +1187,12 @@ void acornscsi_dma_intr(AS_Host *host)
length);
length -= 1;
- dmac_write(host->dma.io_port, DMAC_TXCNTLO, length);
- dmac_write(host->dma.io_port, DMAC_TXCNTHI, length >> 8);
- dmac_write(host->dma.io_port, DMAC_TXADRLO, address);
- dmac_write(host->dma.io_port, DMAC_TXADRMD, address >> 8);
- dmac_write(host->dma.io_port, DMAC_TXADRHI, 0);
- dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_OFF);
+ dmac_write(host, DMAC_TXCNTLO, length);
+ dmac_write(host, DMAC_TXCNTHI, length >> 8);
+ dmac_write(host, DMAC_TXADRLO, address);
+ dmac_write(host, DMAC_TXADRMD, address >> 8);
+ dmac_write(host, DMAC_TXADRHI, 0);
+ dmac_write(host, DMAC_MASKREG, MASK_OFF);
#if (DEBUG & DEBUG_DMA)
DBG(host->SCpnt, acornscsi_dumpdma(host, "into"));
@@ -1209,15 +1206,15 @@ void acornscsi_dma_intr(AS_Host *host)
* attention condition. We continue giving one byte until
* the device recognises the attention.
*/
- if (dmac_read(host->dma.io_port, DMAC_STATUS) & STATUS_RQ0) {
+ if (dmac_read(host, DMAC_STATUS) & STATUS_RQ0) {
acornscsi_abortcmd(host, host->SCpnt->tag);
- dmac_write(host->dma.io_port, DMAC_TXCNTLO, 0);
- dmac_write(host->dma.io_port, DMAC_TXCNTHI, 0);
- dmac_write(host->dma.io_port, DMAC_TXADRLO, 0);
- dmac_write(host->dma.io_port, DMAC_TXADRMD, 0);
- dmac_write(host->dma.io_port, DMAC_TXADRHI, 0);
- dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_OFF);
+ dmac_write(host, DMAC_TXCNTLO, 0);
+ dmac_write(host, DMAC_TXCNTHI, 0);
+ dmac_write(host, DMAC_TXADRLO, 0);
+ dmac_write(host, DMAC_TXADRMD, 0);
+ dmac_write(host, DMAC_TXADRHI, 0);
+ dmac_write(host, DMAC_MASKREG, MASK_OFF);
}
#endif
}
@@ -1271,9 +1268,9 @@ void acornscsi_dma_adjust(AS_Host *host)
host->dma.xfer_setup = 0;
else {
transferred += host->dma.start_addr;
- dmac_write(host->dma.io_port, DMAC_TXADRLO, transferred);
- dmac_write(host->dma.io_port, DMAC_TXADRMD, transferred >> 8);
- dmac_write(host->dma.io_port, DMAC_TXADRHI, transferred >> 16);
+ dmac_write(host, DMAC_TXADRLO, transferred);
+ dmac_write(host, DMAC_TXADRMD, transferred >> 8);
+ dmac_write(host, DMAC_TXADRHI, transferred >> 16);
#if (DEBUG & (DEBUG_DMA|DEBUG_WRITE))
DBG(host->SCpnt, acornscsi_dumpdma(host, "adjo"));
#endif
@@ -1292,12 +1289,12 @@ acornscsi_write_pio(AS_Host *host, char *bytes, int *ptr, int len, unsigned int
int my_ptr = *ptr;
while (my_ptr < len) {
- asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR);
+ asr = sbic_arm_read(host, SBIC_ASR);
if (asr & ASR_DBR) {
timeout = max_timeout;
- sbic_arm_write(host->scsi.io_port, SBIC_DATA, bytes[my_ptr++]);
+ sbic_arm_write(host, SBIC_DATA, bytes[my_ptr++]);
} else if (asr & ASR_INT)
break;
else if (--timeout == 0)
@@ -1320,9 +1317,9 @@ acornscsi_sendcommand(AS_Host *host)
{
struct scsi_cmnd *SCpnt = host->SCpnt;
- sbic_arm_write(host->scsi.io_port, SBIC_TRANSCNTH, 0);
- sbic_arm_writenext(host->scsi.io_port, 0);
- sbic_arm_writenext(host->scsi.io_port, SCpnt->cmd_len - host->scsi.SCp.sent_command);
+ sbic_arm_write(host, SBIC_TRANSCNTH, 0);
+ sbic_arm_writenext(host, 0);
+ sbic_arm_writenext(host, SCpnt->cmd_len - host->scsi.SCp.sent_command);
acornscsi_sbic_issuecmd(host, CMND_XFERINFO);
@@ -1351,7 +1348,7 @@ void acornscsi_sendmessage(AS_Host *host)
acornscsi_sbic_wait(host, ASR_DBR, ASR_DBR, 1000, "sending message 1");
- sbic_arm_write(host->scsi.io_port, SBIC_DATA, NOP);
+ sbic_arm_write(host, SBIC_DATA, NOP);
host->scsi.last_message = NOP;
#if (DEBUG & DEBUG_MESSAGES)
@@ -1365,7 +1362,7 @@ void acornscsi_sendmessage(AS_Host *host)
acornscsi_sbic_wait(host, ASR_DBR, ASR_DBR, 1000, "sending message 2");
- sbic_arm_write(host->scsi.io_port, SBIC_DATA, msg->msg[0]);
+ sbic_arm_write(host, SBIC_DATA, msg->msg[0]);
host->scsi.last_message = msg->msg[0];
#if (DEBUG & DEBUG_MESSAGES)
@@ -1382,9 +1379,9 @@ void acornscsi_sendmessage(AS_Host *host)
* initiator. This provides an interlock so that the
* initiator can determine which message byte is rejected.
*/
- sbic_arm_write(host->scsi.io_port, SBIC_TRANSCNTH, 0);
- sbic_arm_writenext(host->scsi.io_port, 0);
- sbic_arm_writenext(host->scsi.io_port, message_length);
+ sbic_arm_write(host, SBIC_TRANSCNTH, 0);
+ sbic_arm_writenext(host, 0);
+ sbic_arm_writenext(host, message_length);
acornscsi_sbic_issuecmd(host, CMND_XFERINFO);
msgnr = 0;
@@ -1421,7 +1418,7 @@ void acornscsi_readstatusbyte(AS_Host *host)
{
acornscsi_sbic_issuecmd(host, CMND_XFERINFO|CMND_SBT);
acornscsi_sbic_wait(host, ASR_DBR, ASR_DBR, 1000, "reading status byte");
- host->scsi.SCp.Status = sbic_arm_read(host->scsi.io_port, SBIC_DATA);
+ host->scsi.SCp.Status = sbic_arm_read(host, SBIC_DATA);
}
/*
@@ -1438,12 +1435,12 @@ unsigned char acornscsi_readmessagebyte(AS_Host *host)
acornscsi_sbic_wait(host, ASR_DBR, ASR_DBR, 1000, "for message byte");
- message = sbic_arm_read(host->scsi.io_port, SBIC_DATA);
+ message = sbic_arm_read(host, SBIC_DATA);
/* wait for MSGIN-XFER-PAUSED */
acornscsi_sbic_wait(host, ASR_INT, ASR_INT, 1000, "for interrupt after message byte");
- sbic_arm_read(host->scsi.io_port, SBIC_SSR);
+ sbic_arm_read(host, SBIC_SSR);
return message;
}
@@ -1480,7 +1477,7 @@ void acornscsi_message(AS_Host *host)
/* wait for next msg-in */
acornscsi_sbic_wait(host, ASR_INT, ASR_INT, 1000, "for interrupt after negate ack");
- sbic_arm_read(host->scsi.io_port, SBIC_SSR);
+ sbic_arm_read(host, SBIC_SSR);
}
} while (msgidx < msglen);
@@ -1602,7 +1599,7 @@ void acornscsi_message(AS_Host *host)
host->host->host_no, acornscsi_target(host));
host->device[host->SCpnt->device->id].sync_xfer = SYNCHTRANSFER_2DBA;
host->device[host->SCpnt->device->id].sync_state = SYNC_ASYNCHRONOUS;
- sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer);
+ sbic_arm_write(host, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer);
break;
default:
@@ -1652,7 +1649,7 @@ void acornscsi_message(AS_Host *host)
host->device[host->SCpnt->device->id].sync_xfer =
calc_sync_xfer(period * 4, length);
}
- sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer);
+ sbic_arm_write(host, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer);
break;
#else
/* We do not accept synchronous transfers. Respond with a
@@ -1792,10 +1789,10 @@ int acornscsi_starttransfer(AS_Host *host)
residual = scsi_bufflen(host->SCpnt) - host->scsi.SCp.scsi_xferred;
- sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer);
- sbic_arm_writenext(host->scsi.io_port, residual >> 16);
- sbic_arm_writenext(host->scsi.io_port, residual >> 8);
- sbic_arm_writenext(host->scsi.io_port, residual);
+ sbic_arm_write(host, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer);
+ sbic_arm_writenext(host, residual >> 16);
+ sbic_arm_writenext(host, residual >> 8);
+ sbic_arm_writenext(host, residual);
acornscsi_sbic_issuecmd(host, CMND_XFERINFO);
return 1;
}
@@ -1816,7 +1813,7 @@ int acornscsi_reconnect(AS_Host *host)
{
unsigned int target, lun, ok = 0;
- target = sbic_arm_read(host->scsi.io_port, SBIC_SOURCEID);
+ target = sbic_arm_read(host, SBIC_SOURCEID);
if (!(target & 8))
printk(KERN_ERR "scsi%d: invalid source id after reselection "
@@ -1832,7 +1829,7 @@ int acornscsi_reconnect(AS_Host *host)
host->SCpnt = NULL;
}
- lun = sbic_arm_read(host->scsi.io_port, SBIC_DATA) & 7;
+ lun = sbic_arm_read(host, SBIC_DATA) & 7;
host->scsi.reconnected.target = target;
host->scsi.reconnected.lun = lun;
@@ -1952,7 +1949,7 @@ static
void acornscsi_abortcmd(AS_Host *host, unsigned char tag)
{
host->scsi.phase = PHASE_ABORTED;
- sbic_arm_write(host->scsi.io_port, SBIC_CMND, CMND_ASSERTATN);
+ sbic_arm_write(host, SBIC_CMND, CMND_ASSERTATN);
msgqueue_flush(&host->scsi.msgs);
#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE
@@ -1979,11 +1976,11 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq)
{
unsigned int asr, ssr;
- asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR);
+ asr = sbic_arm_read(host, SBIC_ASR);
if (!(asr & ASR_INT))
return INTR_IDLE;
- ssr = sbic_arm_read(host->scsi.io_port, SBIC_SSR);
+ ssr = sbic_arm_read(host, SBIC_SSR);
#if (DEBUG & DEBUG_PHASES)
print_sbic_status(asr, ssr, host->scsi.phase);
@@ -1999,15 +1996,15 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq)
printk(KERN_ERR "scsi%d: reset in standard mode but wanted advanced mode.\n",
host->host->host_no);
/* setup sbic - WD33C93A */
- sbic_arm_write(host->scsi.io_port, SBIC_OWNID, OWNID_EAF | host->host->this_id);
- sbic_arm_write(host->scsi.io_port, SBIC_CMND, CMND_RESET);
+ sbic_arm_write(host, SBIC_OWNID, OWNID_EAF | host->host->this_id);
+ sbic_arm_write(host, SBIC_CMND, CMND_RESET);
return INTR_IDLE;
case 0x01: /* reset state - advanced */
- sbic_arm_write(host->scsi.io_port, SBIC_CTRL, INIT_SBICDMA | CTRL_IDI);
- sbic_arm_write(host->scsi.io_port, SBIC_TIMEOUT, TIMEOUT_TIME);
- sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, SYNCHTRANSFER_2DBA);
- sbic_arm_write(host->scsi.io_port, SBIC_SOURCEID, SOURCEID_ER | SOURCEID_DSP);
+ sbic_arm_write(host, SBIC_CTRL, INIT_SBICDMA | CTRL_IDI);
+ sbic_arm_write(host, SBIC_TIMEOUT, TIMEOUT_TIME);
+ sbic_arm_write(host, SBIC_SYNCHTRANSFER, SYNCHTRANSFER_2DBA);
+ sbic_arm_write(host, SBIC_SOURCEID, SOURCEID_ER | SOURCEID_DSP);
msgqueue_flush(&host->scsi.msgs);
return INTR_IDLE;
@@ -2025,10 +2022,10 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq)
msgqueue_flush(&host->scsi.msgs);
host->dma.transferred = host->scsi.SCp.scsi_xferred;
/* 33C93 gives next interrupt indicating bus phase */
- asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR);
+ asr = sbic_arm_read(host, SBIC_ASR);
if (!(asr & ASR_INT))
break;
- ssr = sbic_arm_read(host->scsi.io_port, SBIC_SSR);
+ ssr = sbic_arm_read(host, SBIC_SSR);
ADD_STATUS(8, ssr, host->scsi.phase, 1);
ADD_STATUS(host->SCpnt->device->id, ssr, host->scsi.phase, 1);
goto connected;
@@ -2476,11 +2473,11 @@ acornscsi_intr(int irq, void *dev_id)
do {
ret = INTR_IDLE;
- iostatus = inb(host->card.io_intr);
+ iostatus = readb(host->fast + INT_REG);
if (iostatus & 2) {
acornscsi_dma_intr(host);
- iostatus = inb(host->card.io_intr);
+ iostatus = readb(host->fast + INT_REG);
}
if (iostatus & 8)
@@ -2655,7 +2652,7 @@ static enum res_abort acornscsi_do_abort(AS_Host *host, struct scsi_cmnd *SCpnt)
* busylun bit.
*/
case PHASE_CONNECTED:
- sbic_arm_write(host->scsi.io_port, SBIC_CMND, CMND_DISCONNECT);
+ sbic_arm_write(host, SBIC_CMND, CMND_DISCONNECT);
host->SCpnt = NULL;
res = res_success_clear;
break;
@@ -2699,8 +2696,8 @@ int acornscsi_abort(struct scsi_cmnd *SCpnt)
#if (DEBUG & DEBUG_ABORT)
{
int asr, ssr;
- asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR);
- ssr = sbic_arm_read(host->scsi.io_port, SBIC_SSR);
+ asr = sbic_arm_read(host, SBIC_ASR);
+ ssr = sbic_arm_read(host, SBIC_SSR);
printk(KERN_WARNING "acornscsi_abort: ");
print_sbic_status(asr, ssr, host->scsi.phase);
@@ -2731,9 +2728,7 @@ int acornscsi_abort(struct scsi_cmnd *SCpnt)
//#if (DEBUG & DEBUG_ABORT)
printk("success\n");
//#endif
- SCpnt->result = DID_ABORT << 16;
- SCpnt->scsi_done(SCpnt);
- result = SCSI_ABORT_SUCCESS;
+ result = SUCCESS;
break;
/*
@@ -2745,7 +2740,7 @@ int acornscsi_abort(struct scsi_cmnd *SCpnt)
//#if (DEBUG & DEBUG_ABORT)
printk("snooze\n");
//#endif
- result = SCSI_ABORT_SNOOZE;
+ result = FAILED;
break;
/*
@@ -2755,11 +2750,7 @@ int acornscsi_abort(struct scsi_cmnd *SCpnt)
default:
case res_not_running:
acornscsi_dumplog(host, SCpnt->device->id);
-#if (DEBUG & DEBUG_ABORT)
- result = SCSI_ABORT_SNOOZE;
-#else
- result = SCSI_ABORT_NOT_RUNNING;
-#endif
+ result = FAILED;
//#if (DEBUG & DEBUG_ABORT)
printk("not running\n");
//#endif
@@ -2770,13 +2761,12 @@ int acornscsi_abort(struct scsi_cmnd *SCpnt)
}
/*
- * Prototype: int acornscsi_reset(struct scsi_cmnd *SCpnt, unsigned int reset_flags)
+ * Prototype: int acornscsi_reset(struct scsi_cmnd *SCpnt)
* Purpose : reset a command on this host/reset this host
* Params : SCpnt - command causing reset
- * result - what type of reset to perform
* Returns : one of SCSI_RESET_ macros
*/
-int acornscsi_reset(struct scsi_cmnd *SCpnt, unsigned int reset_flags)
+int acornscsi_bus_reset(struct scsi_cmnd *SCpnt)
{
AS_Host *host = (AS_Host *)SCpnt->device->host->hostdata;
struct scsi_cmnd *SCptr;
@@ -2787,8 +2777,8 @@ int acornscsi_reset(struct scsi_cmnd *SCpnt, unsigned int reset_flags)
{
int asr, ssr;
- asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR);
- ssr = sbic_arm_read(host->scsi.io_port, SBIC_SSR);
+ asr = sbic_arm_read(host, SBIC_ASR);
+ ssr = sbic_arm_read(host, SBIC_SSR);
printk(KERN_WARNING "acornscsi_reset: ");
print_sbic_status(asr, ssr, host->scsi.phase);
@@ -2798,28 +2788,16 @@ int acornscsi_reset(struct scsi_cmnd *SCpnt, unsigned int reset_flags)
acornscsi_dma_stop(host);
- SCptr = host->SCpnt;
-
/*
* do hard reset. This resets all devices on this host, and so we
* must set the reset status on all commands.
*/
acornscsi_resetcard(host);
- /*
- * report reset on commands current connected/disconnected
- */
- acornscsi_reportstatus(&host->SCpnt, &SCptr, DID_RESET);
-
while ((SCptr = queue_remove(&host->queues.disconnected)) != NULL)
- acornscsi_reportstatus(&SCptr, &SCpnt, DID_RESET);
-
- if (SCpnt) {
- SCpnt->result = DID_RESET << 16;
- SCpnt->scsi_done(SCpnt);
- }
+ ;
- return SCSI_RESET_BUS_RESET | SCSI_RESET_HOST_RESET | SCSI_RESET_SUCCESS;
+ return SUCCESS;
}
/*==============================================================================================
@@ -2850,7 +2828,7 @@ char *acornscsi_info(struct Scsi_Host *host)
" LINK"
#endif
#if (DEBUG & DEBUG_NO_WRITE)
- " NOWRITE ("NO_WRITE_STR")"
+ " NOWRITE (" __stringify(NO_WRITE) ")"
#endif
, host->hostt->name, host->io_port, host->irq,
VER_MAJOR, VER_MINOR, VER_PATCH);
@@ -2881,15 +2859,15 @@ int acornscsi_proc_info(struct Scsi_Host *instance, char *buffer, char **start,
" LINK"
#endif
#if (DEBUG & DEBUG_NO_WRITE)
- " NOWRITE ("NO_WRITE_STR")"
+ " NOWRITE (" __stringify(NO_WRITE) ")"
#endif
"\n\n", VER_MAJOR, VER_MINOR, VER_PATCH);
- p += sprintf(p, "SBIC: WD33C93A Address: %08X IRQ : %d\n",
- host->scsi.io_port, host->scsi.irq);
+ p += sprintf(p, "SBIC: WD33C93A Address: %p IRQ : %d\n",
+ host->base + SBIC_REGIDX, host->scsi.irq);
#ifdef USE_DMAC
- p += sprintf(p, "DMAC: uPC71071 Address: %08X IRQ : %d\n\n",
- host->dma.io_port, host->scsi.irq);
+ p += sprintf(p, "DMAC: uPC71071 Address: %p IRQ : %d\n\n",
+ host->base + DMAC_OFFSET, host->scsi.irq);
#endif
p += sprintf(p, "Statistics:\n"
@@ -2976,9 +2954,8 @@ static struct scsi_host_template acornscsi_template = {
.name = "AcornSCSI",
.info = acornscsi_info,
.queuecommand = acornscsi_queuecmd,
-#warning fixme
- .abort = acornscsi_abort,
- .reset = acornscsi_reset,
+ .eh_abort_handler = acornscsi_abort,
+ .eh_bus_reset_handler = acornscsi_bus_reset,
.can_queue = 16,
.this_id = 7,
.sg_tablesize = SG_ALL,
@@ -2992,48 +2969,37 @@ acornscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct Scsi_Host *host;
AS_Host *ashost;
- int ret = -ENOMEM;
+ int ret;
- host = scsi_host_alloc(&acornscsi_template, sizeof(AS_Host));
- if (!host)
+ ret = ecard_request_resources(ec);
+ if (ret)
goto out;
+ host = scsi_host_alloc(&acornscsi_template, sizeof(AS_Host));
+ if (!host) {
+ ret = -ENOMEM;
+ goto out_release;
+ }
+
ashost = (AS_Host *)host->hostdata;
- host->io_port = ecard_address(ec, ECARD_MEMC, 0);
- host->irq = ec->irq;
+ ashost->base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
+ ashost->fast = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
+ if (!ashost->base || !ashost->fast)
+ goto out_put;
- ashost->host = host;
- ashost->scsi.io_port = ioaddr(host->io_port + 0x800);
- ashost->scsi.irq = host->irq;
- ashost->card.io_intr = POD_SPACE(host->io_port) + 0x800;
- ashost->card.io_page = POD_SPACE(host->io_port) + 0xc00;
- ashost->card.io_ram = ioaddr(host->io_port);
- ashost->dma.io_port = host->io_port + 0xc00;
- ashost->dma.io_intr_clear = POD_SPACE(host->io_port) + 0x800;
+ host->irq = ec->irq;
+ ashost->host = host;
+ ashost->scsi.irq = host->irq;
- ec->irqaddr = (char *)ioaddr(ashost->card.io_intr);
+ ec->irqaddr = ashost->fast + INT_REG;
ec->irqmask = 0x0a;
- ret = -EBUSY;
- if (!request_region(host->io_port + 0x800, 2, "acornscsi(sbic)"))
- goto err_1;
- if (!request_region(ashost->card.io_intr, 1, "acornscsi(intr)"))
- goto err_2;
- if (!request_region(ashost->card.io_page, 1, "acornscsi(page)"))
- goto err_3;
-#ifdef USE_DMAC
- if (!request_region(ashost->dma.io_port, 256, "acornscsi(dmac)"))
- goto err_4;
-#endif
- if (!request_region(host->io_port, 2048, "acornscsi(ram)"))
- goto err_5;
-
ret = request_irq(host->irq, acornscsi_intr, IRQF_DISABLED, "acornscsi", ashost);
if (ret) {
printk(KERN_CRIT "scsi%d: IRQ%d not free: %d\n",
host->host_no, ashost->scsi.irq, ret);
- goto err_6;
+ goto out_put;
}
memset(&ashost->stats, 0, sizeof (ashost->stats));
@@ -3045,27 +3011,22 @@ acornscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
ret = scsi_add_host(host, &ec->dev);
if (ret)
- goto err_7;
+ goto out_irq;
scsi_scan_host(host);
goto out;
- err_7:
+ out_irq:
free_irq(host->irq, ashost);
- err_6:
- release_region(host->io_port, 2048);
- err_5:
-#ifdef USE_DMAC
- release_region(ashost->dma.io_port, 256);
-#endif
- err_4:
- release_region(ashost->card.io_page, 1);
- err_3:
- release_region(ashost->card.io_intr, 1);
- err_2:
- release_region(host->io_port + 0x800, 2);
- err_1:
+ msgqueue_free(&ashost->scsi.msgs);
+ queue_free(&ashost->queues.disconnected);
+ queue_free(&ashost->queues.issue);
+ out_put:
+ ecardm_iounmap(ec, ashost->fast);
+ ecardm_iounmap(ec, ashost->base);
scsi_host_put(host);
+ out_release:
+ ecard_release_resources(ec);
out:
return ret;
}
@@ -3081,20 +3042,17 @@ static void __devexit acornscsi_remove(struct expansion_card *ec)
/*
* Put card into RESET state
*/
- outb(0x80, ashost->card.io_page);
+ writeb(0x80, ashost->fast + PAGE_REG);
free_irq(host->irq, ashost);
- release_region(host->io_port + 0x800, 2);
- release_region(ashost->card.io_intr, 1);
- release_region(ashost->card.io_page, 1);
- release_region(ashost->dma.io_port, 256);
- release_region(host->io_port, 2048);
-
msgqueue_free(&ashost->scsi.msgs);
queue_free(&ashost->queues.disconnected);
queue_free(&ashost->queues.issue);
+ ecardm_iounmap(ec, ashost->fast);
+ ecardm_iounmap(ec, ashost->base);
scsi_host_put(host);
+ ecard_release_resources(ec);
}
static const struct ecard_id acornscsi_cids[] = {
diff --git a/drivers/scsi/arm/acornscsi.h b/drivers/scsi/arm/acornscsi.h
index d11424b89f42..8d2172a0b351 100644
--- a/drivers/scsi/arm/acornscsi.h
+++ b/drivers/scsi/arm/acornscsi.h
@@ -179,7 +179,6 @@
/* miscellaneous internal variables */
-#define POD_SPACE(x) ((x) + 0xd0000)
#define MASK_ON (MASKREG_M3|MASKREG_M2|MASKREG_M1|MASKREG_M0)
#define MASK_OFF (MASKREG_M3|MASKREG_M2|MASKREG_M1)
@@ -279,10 +278,11 @@ typedef struct acornscsi_hostdata {
struct Scsi_Host *host; /* host */
struct scsi_cmnd *SCpnt; /* currently processing command */
struct scsi_cmnd *origSCpnt; /* original connecting command */
+ void __iomem *base; /* memc base address */
+ void __iomem *fast; /* fast ioc base address */
/* driver information */
struct {
- unsigned int io_port; /* base address of WD33C93 */
unsigned int irq; /* interrupt */
phase_t phase; /* current phase */
@@ -329,8 +329,6 @@ typedef struct acornscsi_hostdata {
/* DMA info */
struct {
- unsigned int io_port; /* base address of DMA controller */
- unsigned int io_intr_clear; /* address of DMA interrupt clear */
unsigned int free_addr; /* next free address */
unsigned int start_addr; /* start address of current transfer */
dmadir_t direction; /* dma direction */
@@ -345,9 +343,6 @@ typedef struct acornscsi_hostdata {
/* card info */
struct {
- unsigned int io_intr; /* base address of interrupt id reg */
- unsigned int io_page; /* base address of page reg */
- unsigned int io_ram; /* base address of RAM access */
unsigned char page_reg; /* current setting of page reg */
} card;
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 9bc42763623c..18ca9075e131 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -448,22 +448,27 @@ config SERIAL_CLPS711X_CONSOLE
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
-config SERIAL_S3C2410
- tristate "Samsung S3C2410/S3C2440/S3C2442/S3C2412 Serial port support"
- depends on ARM && ARCH_S3C2410
- select SERIAL_CORE
+config SERIAL_SAMSUNG
+ tristate "Samsung SoC serial support"
+ depends on ARM && PLAT_S3C24XX
help
Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
providing /dev/ttySAC0, 1 and 2 (note, some machines may not
provide all of these ports, depending on how the serial port
pins are configured.
- Currently this driver supports the UARTS on the S3C2410, S3C2440,
- S3C2442, S3C2412 and S3C2413 CPUs.
+config SERIAL_SAMSUNG_DEBUG
+ bool "Samsung SoC serial debug"
+ depends on SERIAL_SAMSUNG
+ help
+ Add support for debugging the serial driver. Since this is
+ generally being used as a console, we use our own output
+ routines that go via the low-level debug printascii()
+ function.
-config SERIAL_S3C2410_CONSOLE
- bool "Support for console on S3C2410 serial port"
- depends on SERIAL_S3C2410=y
+config SERIAL_SAMSUNG_CONSOLE
+ bool "Support for console on Samsung SoC serial port"
+ depends on SERIAL_SAMSUNG=y
select SERIAL_CORE_CONSOLE
help
Allow selection of the S3C24XX on-board serial ports for use as
@@ -476,6 +481,37 @@ config SERIAL_S3C2410_CONSOLE
your boot loader about how to pass options to the kernel at
boot time.)
+config SERIAL_S3C2400
+ tristate "Samsung S3C2410 Serial port support"
+ depends on ARM && SERIAL_SAMSUNG && CPU_S3C2400
+ default y if CPU_S3C2400
+ help
+ Serial port support for the Samsung S3C2400 SoC
+
+config SERIAL_S3C2410
+ tristate "Samsung S3C2410 Serial port support"
+ depends on SERIAL_SAMSUNG && CPU_S3C2410
+ default y if CPU_S3C2410
+ help
+ Serial port support for the Samsung S3C2410 SoC
+
+config SERIAL_S3C2412
+ tristate "Samsung S3C2412/S3C2413 Serial port support"
+ depends on SERIAL_SAMSUNG && CPU_S3C2412
+ default y if CPU_S3C2412
+ help
+ Serial port support for the Samsung S3C2412 and S3C2413 SoC
+
+config SERIAL_S3C2440
+ tristate "Samsung S3C2440/S3C2442 Serial port support"
+ depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442)
+ default y if CPU_S3C2440
+ default y if CPU_S3C2442
+ help
+ Serial port support for the Samsung S3C2440 and S3C2442 SoC
+
+
+
config SERIAL_DZ
bool "DECstation DZ serial driver"
depends on MACH_DECSTATION && 32BIT
@@ -753,7 +789,7 @@ config BFIN_UART3_CTSRTS
config SERIAL_IMX
bool "IMX serial port support"
- depends on ARM && ARCH_IMX
+ depends on ARM && (ARCH_IMX || ARCH_MXC)
select SERIAL_CORE
help
If you have a machine based on a Motorola IMX CPU you
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 0d9c09b1e836..7d85c1fbe7e0 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -28,7 +28,11 @@ obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o
obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
+obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
+obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o
obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
+obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
+obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o
obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 5a375bf0ebf4..64acb39a51ba 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -40,6 +40,7 @@
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
+#include <linux/clk.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -61,6 +62,11 @@
#define UBIR 0xa4 /* BRM Incremental Register */
#define UBMR 0xa8 /* BRM Modulator Register */
#define UBRC 0xac /* Baud Rate Count Register */
+#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
+#define ONEMS 0xb0 /* One Millisecond register */
+#define UTS 0xb4 /* UART Test Register */
+#endif
+#ifdef CONFIG_ARCH_IMX
#define BIPR1 0xb0 /* Incremental Preset Register 1 */
#define BIPR2 0xb4 /* Incremental Preset Register 2 */
#define BIPR3 0xb8 /* Incremental Preset Register 3 */
@@ -70,6 +76,7 @@
#define BMPR3 0xc8 /* BRM Modulator Register 3 */
#define BMPR4 0xcc /* BRM Modulator Register 4 */
#define UTS 0xd0 /* UART Test Register */
+#endif
/* UART Control Register Bit Fields.*/
#define URXD_CHARRDY (1<<15)
@@ -89,7 +96,12 @@
#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
#define UCR1_SNDBRK (1<<4) /* Send break */
#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
+#ifdef CONFIG_ARCH_IMX
#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */
+#endif
+#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
+#define UCR1_UARTCLKEN (0) /* not present on mx2/mx3 */
+#endif
#define UCR1_DOZE (1<<1) /* Doze */
#define UCR1_UARTEN (1<<0) /* UART enabled */
#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
@@ -163,8 +175,19 @@
#define UTS_SOFTRST (1<<0) /* Software reset */
/* We've been assigned a range on the "Low-density serial ports" major */
+#ifdef CONFIG_ARCH_IMX
#define SERIAL_IMX_MAJOR 204
#define MINOR_START 41
+#define DEV_NAME "ttySMX"
+#define MAX_INTERNAL_IRQ IMX_IRQS
+#endif
+
+#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
+#define SERIAL_IMX_MAJOR 207
+#define MINOR_START 16
+#define DEV_NAME "ttymxc"
+#define MAX_INTERNAL_IRQ MXC_MAX_INT_LINES
+#endif
/*
* This determines how often we check the modem status signals
@@ -176,12 +199,15 @@
#define DRIVER_NAME "IMX-uart"
+#define UART_NR 8
+
struct imx_port {
struct uart_port port;
struct timer_list timer;
unsigned int old_status;
int txirq,rxirq,rtsirq;
int have_rtscts:1;
+ struct clk *clk;
};
/*
@@ -405,6 +431,26 @@ out:
return IRQ_HANDLED;
}
+static irqreturn_t imx_int(int irq, void *dev_id)
+{
+ struct imx_port *sport = dev_id;
+ unsigned int sts;
+
+ sts = readl(sport->port.membase + USR1);
+
+ if (sts & USR1_RRDY)
+ imx_rxint(irq, dev_id);
+
+ if (sts & USR1_TRDY &&
+ readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN)
+ imx_txint(irq, dev_id);
+
+ if (sts & USR1_RTSS)
+ imx_rtsint(irq, dev_id);
+
+ return IRQ_HANDLED;
+}
+
/*
* Return TIOCSER_TEMT when transmitter is not busy.
*/
@@ -477,7 +523,8 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
* RFDIV is set such way to satisfy requested uartclk value
*/
val = TXTL << 10 | RXTL;
- ufcr_rfdiv = (imx_get_perclk1() + sport->port.uartclk / 2) / sport->port.uartclk;
+ ufcr_rfdiv = (clk_get_rate(sport->clk) + sport->port.uartclk / 2)
+ / sport->port.uartclk;
if(!ufcr_rfdiv)
ufcr_rfdiv = 1;
@@ -509,21 +556,34 @@ static int imx_startup(struct uart_port *port)
writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
/*
- * Allocate the IRQ
+ * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
+ * chips only have one interrupt.
*/
- retval = request_irq(sport->rxirq, imx_rxint, 0,
- DRIVER_NAME, sport);
- if (retval) goto error_out1;
-
- retval = request_irq(sport->txirq, imx_txint, 0,
- DRIVER_NAME, sport);
- if (retval) goto error_out2;
-
- retval = request_irq(sport->rtsirq, imx_rtsint,
- (sport->rtsirq < IMX_IRQS) ? 0 :
+ if (sport->txirq > 0) {
+ retval = request_irq(sport->rxirq, imx_rxint, 0,
+ DRIVER_NAME, sport);
+ if (retval)
+ goto error_out1;
+
+ retval = request_irq(sport->txirq, imx_txint, 0,
+ DRIVER_NAME, sport);
+ if (retval)
+ goto error_out2;
+
+ retval = request_irq(sport->rtsirq, imx_rtsint,
+ (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- DRIVER_NAME, sport);
- if (retval) goto error_out3;
+ DRIVER_NAME, sport);
+ if (retval)
+ goto error_out3;
+ } else {
+ retval = request_irq(sport->port.irq, imx_int, 0,
+ DRIVER_NAME, sport);
+ if (retval) {
+ free_irq(sport->port.irq, sport);
+ goto error_out1;
+ }
+ }
/*
* Finally, clear and enable interrupts
@@ -548,9 +608,11 @@ static int imx_startup(struct uart_port *port)
return 0;
error_out3:
- free_irq(sport->txirq, sport);
+ if (sport->txirq)
+ free_irq(sport->txirq, sport);
error_out2:
- free_irq(sport->rxirq, sport);
+ if (sport->rxirq)
+ free_irq(sport->rxirq, sport);
error_out1:
return retval;
}
@@ -568,9 +630,12 @@ static void imx_shutdown(struct uart_port *port)
/*
* Free the interrupts
*/
- free_irq(sport->rtsirq, sport);
- free_irq(sport->txirq, sport);
- free_irq(sport->rxirq, sport);
+ if (sport->txirq > 0) {
+ free_irq(sport->rtsirq, sport);
+ free_irq(sport->txirq, sport);
+ free_irq(sport->rxirq, sport);
+ } else
+ free_irq(sport->port.irq, sport);
/*
* Disable all interrupts, port and break condition.
@@ -589,6 +654,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
unsigned long flags;
unsigned int ucr2, old_ucr1, old_txrxen, baud, quot;
unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
+ unsigned int div, num, denom, ufcr;
/*
* If we don't support modem control lines, don't allow
@@ -634,7 +700,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
/*
* Ask the core to calculate the divisor for us.
*/
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
quot = uart_get_divisor(port, baud);
spin_lock_irqsave(&sport->port.lock, flags);
@@ -684,14 +750,41 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
sport->port.membase + UCR2);
old_txrxen &= (UCR2_TXEN | UCR2_RXEN);
- /* set the baud rate. We assume uartclk = 16 MHz
- *
- * baud * 16 UBIR - 1
- * --------- = --------
- * uartclk UBMR - 1
- */
- writel((baud / 100) - 1, sport->port.membase + UBIR);
- writel(10000 - 1, sport->port.membase + UBMR);
+ div = sport->port.uartclk / (baud * 16);
+ if (div > 7)
+ div = 7;
+ if (!div)
+ div = 1;
+
+ num = baud;
+ denom = port->uartclk / div / 16;
+
+ /* shift num and denom right until they fit into 16 bits */
+ while (num > 0x10000 || denom > 0x10000) {
+ num >>= 1;
+ denom >>= 1;
+ }
+ if (num > 0)
+ num -= 1;
+ if (denom > 0)
+ denom -= 1;
+
+ writel(num, sport->port.membase + UBIR);
+ writel(denom, sport->port.membase + UBMR);
+
+ if (div == 7)
+ div = 6; /* 6 in RFDIV means divide by 7 */
+ else
+ div = 6 - div;
+
+ ufcr = readl(sport->port.membase + UFCR);
+ ufcr = (ufcr & (~UFCR_RFDIV)) |
+ (div << 7);
+ writel(ufcr, sport->port.membase + UFCR);
+
+#ifdef ONEMS
+ writel(sport->port.uartclk / div / 1000, sport->port.membase + ONEMS);
+#endif
writel(old_ucr1, sport->port.membase + UCR1);
@@ -801,65 +894,7 @@ static struct uart_ops imx_pops = {
.verify_port = imx_verify_port,
};
-static struct imx_port imx_ports[] = {
- {
- .txirq = UART1_MINT_TX,
- .rxirq = UART1_MINT_RX,
- .rtsirq = UART1_MINT_RTS,
- .port = {
- .type = PORT_IMX,
- .iotype = UPIO_MEM,
- .membase = (void *)IMX_UART1_BASE,
- .mapbase = 0x00206000,
- .irq = UART1_MINT_RX,
- .uartclk = 16000000,
- .fifosize = 32,
- .flags = UPF_BOOT_AUTOCONF,
- .ops = &imx_pops,
- .line = 0,
- },
- }, {
- .txirq = UART2_MINT_TX,
- .rxirq = UART2_MINT_RX,
- .rtsirq = UART2_MINT_RTS,
- .port = {
- .type = PORT_IMX,
- .iotype = UPIO_MEM,
- .membase = (void *)IMX_UART2_BASE,
- .mapbase = 0x00207000,
- .irq = UART2_MINT_RX,
- .uartclk = 16000000,
- .fifosize = 32,
- .flags = UPF_BOOT_AUTOCONF,
- .ops = &imx_pops,
- .line = 1,
- },
- }
-};
-
-/*
- * Setup the IMX serial ports.
- * Note also that we support "console=ttySMXx" where "x" is either 0 or 1.
- * Which serial port this ends up being depends on the machine you're
- * running this kernel on. I'm not convinced that this is a good idea,
- * but that's the way it traditionally works.
- *
- */
-static void __init imx_init_ports(void)
-{
- static int first = 1;
- int i;
-
- if (!first)
- return;
- first = 0;
-
- for (i = 0; i < ARRAY_SIZE(imx_ports); i++) {
- init_timer(&imx_ports[i].timer);
- imx_ports[i].timer.function = imx_timeout;
- imx_ports[i].timer.data = (unsigned long)&imx_ports[i];
- }
-}
+static struct imx_port *imx_ports[UART_NR];
#ifdef CONFIG_SERIAL_IMX_CONSOLE
static void imx_console_putchar(struct uart_port *port, int ch)
@@ -878,7 +913,7 @@ static void imx_console_putchar(struct uart_port *port, int ch)
static void
imx_console_write(struct console *co, const char *s, unsigned int count)
{
- struct imx_port *sport = &imx_ports[co->index];
+ struct imx_port *sport = imx_ports[co->index];
unsigned int old_ucr1, old_ucr2;
/*
@@ -944,7 +979,7 @@ imx_console_get_options(struct imx_port *sport, int *baud,
else
ucfr_rfdiv = 6 - ucfr_rfdiv;
- uartclk = imx_get_perclk1();
+ uartclk = clk_get_rate(sport->clk);
uartclk /= ucfr_rfdiv;
{ /*
@@ -984,7 +1019,7 @@ imx_console_setup(struct console *co, char *options)
*/
if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
co->index = 0;
- sport = &imx_ports[co->index];
+ sport = imx_ports[co->index];
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -998,7 +1033,7 @@ imx_console_setup(struct console *co, char *options)
static struct uart_driver imx_reg;
static struct console imx_console = {
- .name = "ttySMX",
+ .name = DEV_NAME,
.write = imx_console_write,
.device = uart_console_device,
.setup = imx_console_setup,
@@ -1007,14 +1042,6 @@ static struct console imx_console = {
.data = &imx_reg,
};
-static int __init imx_rs_console_init(void)
-{
- imx_init_ports();
- register_console(&imx_console);
- return 0;
-}
-console_initcall(imx_rs_console_init);
-
#define IMX_CONSOLE &imx_console
#else
#define IMX_CONSOLE NULL
@@ -1023,7 +1050,7 @@ console_initcall(imx_rs_console_init);
static struct uart_driver imx_reg = {
.owner = THIS_MODULE,
.driver_name = DRIVER_NAME,
- .dev_name = "ttySMX",
+ .dev_name = DEV_NAME,
.major = SERIAL_IMX_MAJOR,
.minor = MINOR_START,
.nr = ARRAY_SIZE(imx_ports),
@@ -1050,29 +1077,98 @@ static int serial_imx_resume(struct platform_device *dev)
return 0;
}
-static int serial_imx_probe(struct platform_device *dev)
+static int serial_imx_probe(struct platform_device *pdev)
{
+ struct imx_port *sport;
struct imxuart_platform_data *pdata;
+ void __iomem *base;
+ int ret = 0;
+ struct resource *res;
+
+ sport = kzalloc(sizeof(*sport), GFP_KERNEL);
+ if (!sport)
+ return -ENOMEM;
- imx_ports[dev->id].port.dev = &dev->dev;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENODEV;
+ goto free;
+ }
+
+ base = ioremap(res->start, PAGE_SIZE);
+ if (!base) {
+ ret = -ENOMEM;
+ goto free;
+ }
+
+ sport->port.dev = &pdev->dev;
+ sport->port.mapbase = res->start;
+ sport->port.membase = base;
+ sport->port.type = PORT_IMX,
+ sport->port.iotype = UPIO_MEM;
+ sport->port.irq = platform_get_irq(pdev, 0);
+ sport->rxirq = platform_get_irq(pdev, 0);
+ sport->txirq = platform_get_irq(pdev, 1);
+ sport->rtsirq = platform_get_irq(pdev, 2);
+ sport->port.fifosize = 32;
+ sport->port.ops = &imx_pops;
+ sport->port.flags = UPF_BOOT_AUTOCONF;
+ sport->port.line = pdev->id;
+ init_timer(&sport->timer);
+ sport->timer.function = imx_timeout;
+ sport->timer.data = (unsigned long)sport;
+
+ sport->clk = clk_get(&pdev->dev, "uart_clk");
+ if (IS_ERR(sport->clk)) {
+ ret = PTR_ERR(sport->clk);
+ goto unmap;
+ }
+ clk_enable(sport->clk);
- pdata = (struct imxuart_platform_data *)dev->dev.platform_data;
+ sport->port.uartclk = clk_get_rate(sport->clk);
+
+ imx_ports[pdev->id] = sport;
+
+ pdata = pdev->dev.platform_data;
if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
- imx_ports[dev->id].have_rtscts = 1;
+ sport->have_rtscts = 1;
+
+ if (pdata->init)
+ pdata->init(pdev);
+
+ uart_add_one_port(&imx_reg, &sport->port);
+ platform_set_drvdata(pdev, &sport->port);
- uart_add_one_port(&imx_reg, &imx_ports[dev->id].port);
- platform_set_drvdata(dev, &imx_ports[dev->id]);
return 0;
+unmap:
+ iounmap(sport->port.membase);
+free:
+ kfree(sport);
+
+ return ret;
}
-static int serial_imx_remove(struct platform_device *dev)
+static int serial_imx_remove(struct platform_device *pdev)
{
- struct imx_port *sport = platform_get_drvdata(dev);
+ struct imxuart_platform_data *pdata;
+ struct imx_port *sport = platform_get_drvdata(pdev);
- platform_set_drvdata(dev, NULL);
+ pdata = pdev->dev.platform_data;
- if (sport)
+ platform_set_drvdata(pdev, NULL);
+
+ if (sport) {
uart_remove_one_port(&imx_reg, &sport->port);
+ clk_put(sport->clk);
+ }
+
+ clk_disable(sport->clk);
+
+ if (pdata->exit)
+ pdata->exit(pdev);
+
+ iounmap(sport->port.membase);
+ kfree(sport);
return 0;
}
@@ -1095,8 +1191,6 @@ static int __init imx_serial_init(void)
printk(KERN_INFO "Serial: IMX driver\n");
- imx_init_ports();
-
ret = uart_register_driver(&imx_reg);
if (ret)
return ret;
diff --git a/drivers/serial/s3c2400.c b/drivers/serial/s3c2400.c
new file mode 100644
index 000000000000..a1102053e553
--- /dev/null
+++ b/drivers/serial/s3c2400.c
@@ -0,0 +1,106 @@
+/* linux/drivers/serial/s3c240.c
+ *
+ * Driver for Samsung SoC onboard UARTs.
+ *
+ * Ben Dooks, Copyright (c) 2003-2005 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <asm/irq.h>
+
+#include <asm/hardware.h>
+
+#include <asm/plat-s3c/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+
+#include "samsung.h"
+
+static int s3c2400_serial_getsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ clk->divisor = 1;
+ clk->name = "pclk";
+
+ return 0;
+}
+
+static int s3c2400_serial_setsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ return 0;
+}
+
+static int s3c2400_serial_resetport(struct uart_port *port,
+ struct s3c2410_uartcfg *cfg)
+{
+ dbg("s3c2400_serial_resetport: port=%p (%08lx), cfg=%p\n",
+ port, port->mapbase, cfg);
+
+ wr_regl(port, S3C2410_UCON, cfg->ucon);
+ wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+ /* reset both fifos */
+
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+ return 0;
+}
+
+static struct s3c24xx_uart_info s3c2400_uart_inf = {
+ .name = "Samsung S3C2400 UART",
+ .type = PORT_S3C2400,
+ .fifosize = 16,
+ .rx_fifomask = S3C2410_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C2410_UFSTAT_RXFULL,
+ .tx_fifofull = S3C2410_UFSTAT_TXFULL,
+ .tx_fifomask = S3C2410_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT,
+ .get_clksrc = s3c2400_serial_getsource,
+ .set_clksrc = s3c2400_serial_setsource,
+ .reset_port = s3c2400_serial_resetport,
+};
+
+static int s3c2400_serial_probe(struct platform_device *dev)
+{
+ return s3c24xx_serial_probe(dev, &s3c2400_uart_inf);
+}
+
+static struct platform_driver s3c2400_serial_drv = {
+ .probe = s3c2400_serial_probe,
+ .remove = s3c24xx_serial_remove,
+ .driver = {
+ .name = "s3c2400-uart",
+ .owner = THIS_MODULE,
+ },
+};
+
+s3c24xx_console_init(&s3c2400_serial_drv, &s3c2400_uart_inf);
+
+static inline int s3c2400_serial_init(void)
+{
+ return s3c24xx_serial_init(&s3c2400_serial_drv, &s3c2400_uart_inf);
+}
+
+static inline void s3c2400_serial_exit(void)
+{
+ platform_driver_unregister(&s3c2400_serial_drv);
+}
+
+module_init(s3c2400_serial_init);
+module_exit(s3c2400_serial_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("Samsung S3C2400 SoC Serial port driver");
+MODULE_ALIAS("platform:s3c2400-uart");
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 2b6a013639e6..c5f03f41686f 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -1,1270 +1,30 @@
-/*
- * linux/drivers/serial/s3c2410.c
+/* linux/drivers/serial/s3c2410.c
*
- * Driver for onboard UARTs on the Samsung S3C24XX
+ * Driver for Samsung S3C2410 SoC onboard UARTs.
*
- * Based on drivers/char/serial.c and drivers/char/21285.c
+ * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
*
- * Ben Dooks, (c) 2003-2005 Simtec Electronics
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * Changelog:
- *
- * 22-Jul-2004 BJD Finished off device rewrite
- *
- * 21-Jul-2004 BJD Thanks to <herbet@13thfloor.at> for pointing out
- * problems with baud rate and loss of IR settings. Update
- * to add configuration via platform_device structure
- *
- * 28-Sep-2004 BJD Re-write for the following items
- * - S3C2410 and S3C2440 serial support
- * - Power Management support
- * - Fix console via IrDA devices
- * - SysReq (Herbert Pötzl)
- * - Break character handling (Herbert Pötzl)
- * - spin-lock initialisation (Dimitry Andric)
- * - added clock control
- * - updated init code to use platform_device info
- *
- * 06-Mar-2005 BJD Add s3c2440 fclk clock source
- *
- * 09-Mar-2005 BJD Add s3c2400 support
- *
- * 10-Mar-2005 LCVR Changed S3C2410_VA_UART to S3C24XX_VA_UART
-*/
-
-/* Note on 2440 fclk clock source handling
- *
- * Whilst it is possible to use the fclk as clock source, the method
- * of properly switching too/from this is currently un-implemented, so
- * whichever way is configured at startup is the one that will be used.
-*/
-
-/* Hote on 2410 error handling
- *
- * The s3c2410 manual has a love/hate affair with the contents of the
- * UERSTAT register in the UART blocks, and keeps marking some of the
- * error bits as reserved. Having checked with the s3c2410x01,
- * it copes with BREAKs properly, so I am happy to ignore the RESERVED
- * feature from the latter versions of the manual.
- *
- * If it becomes aparrent that latter versions of the 2410 remove these
- * bits, then action will have to be taken to differentiate the versions
- * and change the policy on BREAK
- *
- * BJD, 04-Nov-2004
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
*/
-
-#if defined(CONFIG_SERIAL_S3C2410_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
#include <linux/module.h>
#include <linux/ioport.h>
+#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/init.h>
-#include <linux/sysrq.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <asm/io.h>
#include <asm/irq.h>
-
#include <asm/hardware.h>
#include <asm/plat-s3c/regs-serial.h>
#include <asm/arch/regs-gpio.h>
-/* structures */
-
-struct s3c24xx_uart_info {
- char *name;
- unsigned int type;
- unsigned int fifosize;
- unsigned long rx_fifomask;
- unsigned long rx_fifoshift;
- unsigned long rx_fifofull;
- unsigned long tx_fifomask;
- unsigned long tx_fifoshift;
- unsigned long tx_fifofull;
-
- /* clock source control */
-
- int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
- int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
-
- /* uart controls */
- int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *);
-};
-
-struct s3c24xx_uart_port {
- unsigned char rx_claimed;
- unsigned char tx_claimed;
-
- struct s3c24xx_uart_info *info;
- struct s3c24xx_uart_clksrc *clksrc;
- struct clk *clk;
- struct clk *baudclk;
- struct uart_port port;
-};
-
-
-/* configuration defines */
-
-#if 0
-#if 1
-/* send debug to the low-level output routines */
-
-extern void printascii(const char *);
-
-static void
-s3c24xx_serial_dbg(const char *fmt, ...)
-{
- va_list va;
- char buff[256];
-
- va_start(va, fmt);
- vsprintf(buff, fmt, va);
- va_end(va);
-
- printascii(buff);
-}
-
-#define dbg(x...) s3c24xx_serial_dbg(x)
-
-#else
-#define dbg(x...) printk(KERN_DEBUG "s3c24xx: ");
-#endif
-#else /* no debug */
-#define dbg(x...) do {} while(0)
-#endif
-
-/* UART name and device definitions */
-
-#define S3C24XX_SERIAL_NAME "ttySAC"
-#define S3C24XX_SERIAL_MAJOR 204
-#define S3C24XX_SERIAL_MINOR 64
-
-
-/* conversion functions */
-
-#define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev)
-#define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data)
-
-/* we can support 3 uarts, but not always use them */
-
-#ifdef CONFIG_CPU_S3C2400
-#define NR_PORTS (2)
-#else
-#define NR_PORTS (3)
-#endif
-
-/* port irq numbers */
-
-#define TX_IRQ(port) ((port)->irq + 1)
-#define RX_IRQ(port) ((port)->irq)
-
-/* register access controls */
-
-#define portaddr(port, reg) ((port)->membase + (reg))
-
-#define rd_regb(port, reg) (__raw_readb(portaddr(port, reg)))
-#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg)))
-
-#define wr_regb(port, reg, val) \
- do { __raw_writeb(val, portaddr(port, reg)); } while(0)
-
-#define wr_regl(port, reg, val) \
- do { __raw_writel(val, portaddr(port, reg)); } while(0)
-
-/* macros to change one thing to another */
-
-#define tx_enabled(port) ((port)->unused[0])
-#define rx_enabled(port) ((port)->unused[1])
-
-/* flag to ignore all characters comming in */
-#define RXSTAT_DUMMY_READ (0x10000000)
-
-static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
-{
- return container_of(port, struct s3c24xx_uart_port, port);
-}
-
-/* translate a port to the device name */
-
-static inline const char *s3c24xx_serial_portname(struct uart_port *port)
-{
- return to_platform_device(port->dev)->name;
-}
-
-static int s3c24xx_serial_txempty_nofifo(struct uart_port *port)
-{
- return (rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE);
-}
-
-static void s3c24xx_serial_rx_enable(struct uart_port *port)
-{
- unsigned long flags;
- unsigned int ucon, ufcon;
- int count = 10000;
-
- spin_lock_irqsave(&port->lock, flags);
-
- while (--count && !s3c24xx_serial_txempty_nofifo(port))
- udelay(100);
-
- ufcon = rd_regl(port, S3C2410_UFCON);
- ufcon |= S3C2410_UFCON_RESETRX;
- wr_regl(port, S3C2410_UFCON, ufcon);
-
- ucon = rd_regl(port, S3C2410_UCON);
- ucon |= S3C2410_UCON_RXIRQMODE;
- wr_regl(port, S3C2410_UCON, ucon);
-
- rx_enabled(port) = 1;
- spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static void s3c24xx_serial_rx_disable(struct uart_port *port)
-{
- unsigned long flags;
- unsigned int ucon;
-
- spin_lock_irqsave(&port->lock, flags);
-
- ucon = rd_regl(port, S3C2410_UCON);
- ucon &= ~S3C2410_UCON_RXIRQMODE;
- wr_regl(port, S3C2410_UCON, ucon);
-
- rx_enabled(port) = 0;
- spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static void s3c24xx_serial_stop_tx(struct uart_port *port)
-{
- if (tx_enabled(port)) {
- disable_irq(TX_IRQ(port));
- tx_enabled(port) = 0;
- if (port->flags & UPF_CONS_FLOW)
- s3c24xx_serial_rx_enable(port);
- }
-}
-
-static void s3c24xx_serial_start_tx(struct uart_port *port)
-{
- if (!tx_enabled(port)) {
- if (port->flags & UPF_CONS_FLOW)
- s3c24xx_serial_rx_disable(port);
-
- enable_irq(TX_IRQ(port));
- tx_enabled(port) = 1;
- }
-}
-
-
-static void s3c24xx_serial_stop_rx(struct uart_port *port)
-{
- if (rx_enabled(port)) {
- dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
- disable_irq(RX_IRQ(port));
- rx_enabled(port) = 0;
- }
-}
-
-static void s3c24xx_serial_enable_ms(struct uart_port *port)
-{
-}
-
-static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *port)
-{
- return to_ourport(port)->info;
-}
-
-static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port)
-{
- if (port->dev == NULL)
- return NULL;
-
- return (struct s3c2410_uartcfg *)port->dev->platform_data;
-}
-
-static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
- unsigned long ufstat)
-{
- struct s3c24xx_uart_info *info = ourport->info;
-
- if (ufstat & info->rx_fifofull)
- return info->fifosize;
-
- return (ufstat & info->rx_fifomask) >> info->rx_fifoshift;
-}
-
-
-/* ? - where has parity gone?? */
-#define S3C2410_UERSTAT_PARITY (0x1000)
-
-static irqreturn_t
-s3c24xx_serial_rx_chars(int irq, void *dev_id)
-{
- struct s3c24xx_uart_port *ourport = dev_id;
- struct uart_port *port = &ourport->port;
- struct tty_struct *tty = port->info->tty;
- unsigned int ufcon, ch, flag, ufstat, uerstat;
- int max_count = 64;
-
- while (max_count-- > 0) {
- ufcon = rd_regl(port, S3C2410_UFCON);
- ufstat = rd_regl(port, S3C2410_UFSTAT);
-
- if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
- break;
-
- uerstat = rd_regl(port, S3C2410_UERSTAT);
- ch = rd_regb(port, S3C2410_URXH);
-
- if (port->flags & UPF_CONS_FLOW) {
- int txe = s3c24xx_serial_txempty_nofifo(port);
-
- if (rx_enabled(port)) {
- if (!txe) {
- rx_enabled(port) = 0;
- continue;
- }
- } else {
- if (txe) {
- ufcon |= S3C2410_UFCON_RESETRX;
- wr_regl(port, S3C2410_UFCON, ufcon);
- rx_enabled(port) = 1;
- goto out;
- }
- continue;
- }
- }
-
- /* insert the character into the buffer */
-
- flag = TTY_NORMAL;
- port->icount.rx++;
-
- if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) {
- dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n",
- ch, uerstat);
-
- /* check for break */
- if (uerstat & S3C2410_UERSTAT_BREAK) {
- dbg("break!\n");
- port->icount.brk++;
- if (uart_handle_break(port))
- goto ignore_char;
- }
-
- if (uerstat & S3C2410_UERSTAT_FRAME)
- port->icount.frame++;
- if (uerstat & S3C2410_UERSTAT_OVERRUN)
- port->icount.overrun++;
-
- uerstat &= port->read_status_mask;
-
- if (uerstat & S3C2410_UERSTAT_BREAK)
- flag = TTY_BREAK;
- else if (uerstat & S3C2410_UERSTAT_PARITY)
- flag = TTY_PARITY;
- else if (uerstat & ( S3C2410_UERSTAT_FRAME | S3C2410_UERSTAT_OVERRUN))
- flag = TTY_FRAME;
- }
-
- if (uart_handle_sysrq_char(port, ch))
- goto ignore_char;
-
- uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN, ch, flag);
-
- ignore_char:
- continue;
- }
- tty_flip_buffer_push(tty);
-
- out:
- return IRQ_HANDLED;
-}
-
-static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
-{
- struct s3c24xx_uart_port *ourport = id;
- struct uart_port *port = &ourport->port;
- struct circ_buf *xmit = &port->info->xmit;
- int count = 256;
-
- if (port->x_char) {
- wr_regb(port, S3C2410_UTXH, port->x_char);
- port->icount.tx++;
- port->x_char = 0;
- goto out;
- }
-
- /* if there isnt anything more to transmit, or the uart is now
- * stopped, disable the uart and exit
- */
-
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- s3c24xx_serial_stop_tx(port);
- goto out;
- }
-
- /* try and drain the buffer... */
-
- while (!uart_circ_empty(xmit) && count-- > 0) {
- if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
- break;
-
- wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- s3c24xx_serial_stop_tx(port);
-
- out:
- return IRQ_HANDLED;
-}
-
-static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
-{
- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
- unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT);
- unsigned long ufcon = rd_regl(port, S3C2410_UFCON);
-
- if (ufcon & S3C2410_UFCON_FIFOMODE) {
- if ((ufstat & info->tx_fifomask) != 0 ||
- (ufstat & info->tx_fifofull))
- return 0;
-
- return 1;
- }
-
- return s3c24xx_serial_txempty_nofifo(port);
-}
-
-/* no modem control lines */
-static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
-{
- unsigned int umstat = rd_regb(port,S3C2410_UMSTAT);
-
- if (umstat & S3C2410_UMSTAT_CTS)
- return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
- else
- return TIOCM_CAR | TIOCM_DSR;
-}
-
-static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
- /* todo - possibly remove AFC and do manual CTS */
-}
-
-static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
-{
- unsigned long flags;
- unsigned int ucon;
-
- spin_lock_irqsave(&port->lock, flags);
-
- ucon = rd_regl(port, S3C2410_UCON);
-
- if (break_state)
- ucon |= S3C2410_UCON_SBREAK;
- else
- ucon &= ~S3C2410_UCON_SBREAK;
-
- wr_regl(port, S3C2410_UCON, ucon);
-
- spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static void s3c24xx_serial_shutdown(struct uart_port *port)
-{
- struct s3c24xx_uart_port *ourport = to_ourport(port);
-
- if (ourport->tx_claimed) {
- free_irq(TX_IRQ(port), ourport);
- tx_enabled(port) = 0;
- ourport->tx_claimed = 0;
- }
-
- if (ourport->rx_claimed) {
- free_irq(RX_IRQ(port), ourport);
- ourport->rx_claimed = 0;
- rx_enabled(port) = 0;
- }
-}
-
-
-static int s3c24xx_serial_startup(struct uart_port *port)
-{
- struct s3c24xx_uart_port *ourport = to_ourport(port);
- int ret;
-
- dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n",
- port->mapbase, port->membase);
-
- rx_enabled(port) = 1;
-
- ret = request_irq(RX_IRQ(port),
- s3c24xx_serial_rx_chars, 0,
- s3c24xx_serial_portname(port), ourport);
-
- if (ret != 0) {
- printk(KERN_ERR "cannot get irq %d\n", RX_IRQ(port));
- return ret;
- }
-
- ourport->rx_claimed = 1;
-
- dbg("requesting tx irq...\n");
-
- tx_enabled(port) = 1;
-
- ret = request_irq(TX_IRQ(port),
- s3c24xx_serial_tx_chars, 0,
- s3c24xx_serial_portname(port), ourport);
-
- if (ret) {
- printk(KERN_ERR "cannot get irq %d\n", TX_IRQ(port));
- goto err;
- }
-
- ourport->tx_claimed = 1;
-
- dbg("s3c24xx_serial_startup ok\n");
-
- /* the port reset code should have done the correct
- * register setup for the port controls */
-
- return ret;
-
- err:
- s3c24xx_serial_shutdown(port);
- return ret;
-}
-
-/* power power management control */
-
-static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
- unsigned int old)
-{
- struct s3c24xx_uart_port *ourport = to_ourport(port);
-
- switch (level) {
- case 3:
- if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
- clk_disable(ourport->baudclk);
-
- clk_disable(ourport->clk);
- break;
-
- case 0:
- clk_enable(ourport->clk);
-
- if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
- clk_enable(ourport->baudclk);
-
- break;
- default:
- printk(KERN_ERR "s3c24xx_serial: unknown pm %d\n", level);
- }
-}
-
-/* baud rate calculation
- *
- * The UARTs on the S3C2410/S3C2440 can take their clocks from a number
- * of different sources, including the peripheral clock ("pclk") and an
- * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk")
- * with a programmable extra divisor.
- *
- * The following code goes through the clock sources, and calculates the
- * baud clocks (and the resultant actual baud rates) and then tries to
- * pick the closest one and select that.
- *
-*/
-
-
-#define MAX_CLKS (8)
-
-static struct s3c24xx_uart_clksrc tmp_clksrc = {
- .name = "pclk",
- .min_baud = 0,
- .max_baud = 0,
- .divisor = 1,
-};
-
-static inline int
-s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
-{
- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
-
- return (info->get_clksrc)(port, c);
-}
-
-static inline int
-s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
-{
- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
-
- return (info->set_clksrc)(port, c);
-}
-
-struct baud_calc {
- struct s3c24xx_uart_clksrc *clksrc;
- unsigned int calc;
- unsigned int quot;
- struct clk *src;
-};
-
-static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
- struct uart_port *port,
- struct s3c24xx_uart_clksrc *clksrc,
- unsigned int baud)
-{
- unsigned long rate;
-
- calc->src = clk_get(port->dev, clksrc->name);
- if (calc->src == NULL || IS_ERR(calc->src))
- return 0;
-
- rate = clk_get_rate(calc->src);
- rate /= clksrc->divisor;
-
- calc->clksrc = clksrc;
- calc->quot = (rate + (8 * baud)) / (16 * baud);
- calc->calc = (rate / (calc->quot * 16));
-
- calc->quot--;
- return 1;
-}
-
-static unsigned int s3c24xx_serial_getclk(struct uart_port *port,
- struct s3c24xx_uart_clksrc **clksrc,
- struct clk **clk,
- unsigned int baud)
-{
- struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
- struct s3c24xx_uart_clksrc *clkp;
- struct baud_calc res[MAX_CLKS];
- struct baud_calc *resptr, *best, *sptr;
- int i;
-
- clkp = cfg->clocks;
- best = NULL;
-
- if (cfg->clocks_size < 2) {
- if (cfg->clocks_size == 0)
- clkp = &tmp_clksrc;
-
- /* check to see if we're sourcing fclk, and if so we're
- * going to have to update the clock source
- */
-
- if (strcmp(clkp->name, "fclk") == 0) {
- struct s3c24xx_uart_clksrc src;
-
- s3c24xx_serial_getsource(port, &src);
-
- /* check that the port already using fclk, and if
- * not, then re-select fclk
- */
-
- if (strcmp(src.name, clkp->name) == 0) {
- s3c24xx_serial_setsource(port, clkp);
- s3c24xx_serial_getsource(port, &src);
- }
-
- clkp->divisor = src.divisor;
- }
-
- s3c24xx_serial_calcbaud(res, port, clkp, baud);
- best = res;
- resptr = best + 1;
- } else {
- resptr = res;
-
- for (i = 0; i < cfg->clocks_size; i++, clkp++) {
- if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud))
- resptr++;
- }
- }
-
- /* ok, we now need to select the best clock we found */
-
- if (!best) {
- unsigned int deviation = (1<<30)|((1<<30)-1);
- int calc_deviation;
-
- for (sptr = res; sptr < resptr; sptr++) {
- printk(KERN_DEBUG
- "found clk %p (%s) quot %d, calc %d\n",
- sptr->clksrc, sptr->clksrc->name,
- sptr->quot, sptr->calc);
-
- calc_deviation = baud - sptr->calc;
- if (calc_deviation < 0)
- calc_deviation = -calc_deviation;
-
- if (calc_deviation < deviation) {
- best = sptr;
- deviation = calc_deviation;
- }
- }
-
- printk(KERN_DEBUG "best %p (deviation %d)\n", best, deviation);
- }
-
- printk(KERN_DEBUG "selected clock %p (%s) quot %d, calc %d\n",
- best->clksrc, best->clksrc->name, best->quot, best->calc);
-
- /* store results to pass back */
-
- *clksrc = best->clksrc;
- *clk = best->src;
-
- return best->quot;
-}
-
-static void s3c24xx_serial_set_termios(struct uart_port *port,
- struct ktermios *termios,
- struct ktermios *old)
-{
- struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
- struct s3c24xx_uart_port *ourport = to_ourport(port);
- struct s3c24xx_uart_clksrc *clksrc = NULL;
- struct clk *clk = NULL;
- unsigned long flags;
- unsigned int baud, quot;
- unsigned int ulcon;
- unsigned int umcon;
-
- /*
- * We don't support modem control lines.
- */
- termios->c_cflag &= ~(HUPCL | CMSPAR);
- termios->c_cflag |= CLOCAL;
-
- /*
- * Ask the core to calculate the divisor for us.
- */
-
- baud = uart_get_baud_rate(port, termios, old, 0, 115200*8);
-
- if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
- quot = port->custom_divisor;
- else
- quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud);
-
- /* check to see if we need to change clock source */
-
- if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
- s3c24xx_serial_setsource(port, clksrc);
-
- if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
- clk_disable(ourport->baudclk);
- ourport->baudclk = NULL;
- }
-
- clk_enable(clk);
-
- ourport->clksrc = clksrc;
- ourport->baudclk = clk;
- }
-
- switch (termios->c_cflag & CSIZE) {
- case CS5:
- dbg("config: 5bits/char\n");
- ulcon = S3C2410_LCON_CS5;
- break;
- case CS6:
- dbg("config: 6bits/char\n");
- ulcon = S3C2410_LCON_CS6;
- break;
- case CS7:
- dbg("config: 7bits/char\n");
- ulcon = S3C2410_LCON_CS7;
- break;
- case CS8:
- default:
- dbg("config: 8bits/char\n");
- ulcon = S3C2410_LCON_CS8;
- break;
- }
-
- /* preserve original lcon IR settings */
- ulcon |= (cfg->ulcon & S3C2410_LCON_IRM);
-
- if (termios->c_cflag & CSTOPB)
- ulcon |= S3C2410_LCON_STOPB;
-
- umcon = (termios->c_cflag & CRTSCTS) ? S3C2410_UMCOM_AFC : 0;
-
- if (termios->c_cflag & PARENB) {
- if (termios->c_cflag & PARODD)
- ulcon |= S3C2410_LCON_PODD;
- else
- ulcon |= S3C2410_LCON_PEVEN;
- } else {
- ulcon |= S3C2410_LCON_PNONE;
- }
-
- spin_lock_irqsave(&port->lock, flags);
-
- dbg("setting ulcon to %08x, brddiv to %d\n", ulcon, quot);
-
- wr_regl(port, S3C2410_ULCON, ulcon);
- wr_regl(port, S3C2410_UBRDIV, quot);
- wr_regl(port, S3C2410_UMCON, umcon);
-
- dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
- rd_regl(port, S3C2410_ULCON),
- rd_regl(port, S3C2410_UCON),
- rd_regl(port, S3C2410_UFCON));
-
- /*
- * Update the per-port timeout.
- */
- uart_update_timeout(port, termios->c_cflag, baud);
-
- /*
- * Which character status flags are we interested in?
- */
- port->read_status_mask = S3C2410_UERSTAT_OVERRUN;
- if (termios->c_iflag & INPCK)
- port->read_status_mask |= S3C2410_UERSTAT_FRAME | S3C2410_UERSTAT_PARITY;
-
- /*
- * Which character status flags should we ignore?
- */
- port->ignore_status_mask = 0;
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN;
- if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= S3C2410_UERSTAT_FRAME;
-
- /*
- * Ignore all characters if CREAD is not set.
- */
- if ((termios->c_cflag & CREAD) == 0)
- port->ignore_status_mask |= RXSTAT_DUMMY_READ;
-
- spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static const char *s3c24xx_serial_type(struct uart_port *port)
-{
- switch (port->type) {
- case PORT_S3C2410:
- return "S3C2410";
- case PORT_S3C2440:
- return "S3C2440";
- case PORT_S3C2412:
- return "S3C2412";
- default:
- return NULL;
- }
-}
-
-#define MAP_SIZE (0x100)
-
-static void s3c24xx_serial_release_port(struct uart_port *port)
-{
- release_mem_region(port->mapbase, MAP_SIZE);
-}
-
-static int s3c24xx_serial_request_port(struct uart_port *port)
-{
- const char *name = s3c24xx_serial_portname(port);
- return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY;
-}
-
-static void s3c24xx_serial_config_port(struct uart_port *port, int flags)
-{
- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
-
- if (flags & UART_CONFIG_TYPE &&
- s3c24xx_serial_request_port(port) == 0)
- port->type = info->type;
-}
-
-/*
- * verify the new serial_struct (for TIOCSSERIAL).
- */
-static int
-s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
-
- if (ser->type != PORT_UNKNOWN && ser->type != info->type)
- return -EINVAL;
-
- return 0;
-}
-
-
-#ifdef CONFIG_SERIAL_S3C2410_CONSOLE
-
-static struct console s3c24xx_serial_console;
-
-#define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console
-#else
-#define S3C24XX_SERIAL_CONSOLE NULL
-#endif
-
-static struct uart_ops s3c24xx_serial_ops = {
- .pm = s3c24xx_serial_pm,
- .tx_empty = s3c24xx_serial_tx_empty,
- .get_mctrl = s3c24xx_serial_get_mctrl,
- .set_mctrl = s3c24xx_serial_set_mctrl,
- .stop_tx = s3c24xx_serial_stop_tx,
- .start_tx = s3c24xx_serial_start_tx,
- .stop_rx = s3c24xx_serial_stop_rx,
- .enable_ms = s3c24xx_serial_enable_ms,
- .break_ctl = s3c24xx_serial_break_ctl,
- .startup = s3c24xx_serial_startup,
- .shutdown = s3c24xx_serial_shutdown,
- .set_termios = s3c24xx_serial_set_termios,
- .type = s3c24xx_serial_type,
- .release_port = s3c24xx_serial_release_port,
- .request_port = s3c24xx_serial_request_port,
- .config_port = s3c24xx_serial_config_port,
- .verify_port = s3c24xx_serial_verify_port,
-};
-
-
-static struct uart_driver s3c24xx_uart_drv = {
- .owner = THIS_MODULE,
- .dev_name = "s3c2410_serial",
- .nr = 3,
- .cons = S3C24XX_SERIAL_CONSOLE,
- .driver_name = S3C24XX_SERIAL_NAME,
- .major = S3C24XX_SERIAL_MAJOR,
- .minor = S3C24XX_SERIAL_MINOR,
-};
-
-static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
- [0] = {
- .port = {
- .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock),
- .iotype = UPIO_MEM,
- .irq = IRQ_S3CUART_RX0,
- .uartclk = 0,
- .fifosize = 16,
- .ops = &s3c24xx_serial_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 0,
- }
- },
- [1] = {
- .port = {
- .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[1].port.lock),
- .iotype = UPIO_MEM,
- .irq = IRQ_S3CUART_RX1,
- .uartclk = 0,
- .fifosize = 16,
- .ops = &s3c24xx_serial_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 1,
- }
- },
-#if NR_PORTS > 2
-
- [2] = {
- .port = {
- .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[2].port.lock),
- .iotype = UPIO_MEM,
- .irq = IRQ_S3CUART_RX2,
- .uartclk = 0,
- .fifosize = 16,
- .ops = &s3c24xx_serial_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 2,
- }
- }
-#endif
-};
-
-/* s3c24xx_serial_resetport
- *
- * wrapper to call the specific reset for this port (reset the fifos
- * and the settings)
-*/
-
-static inline int s3c24xx_serial_resetport(struct uart_port * port,
- struct s3c2410_uartcfg *cfg)
-{
- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
-
- return (info->reset_port)(port, cfg);
-}
-
-/* s3c24xx_serial_init_port
- *
- * initialise a single serial port from the platform device given
- */
-
-static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
- struct s3c24xx_uart_info *info,
- struct platform_device *platdev)
-{
- struct uart_port *port = &ourport->port;
- struct s3c2410_uartcfg *cfg;
- struct resource *res;
- int ret;
-
- dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev);
-
- if (platdev == NULL)
- return -ENODEV;
-
- cfg = s3c24xx_dev_to_cfg(&platdev->dev);
-
- if (port->mapbase != 0)
- return 0;
-
- if (cfg->hwport > 3)
- return -EINVAL;
-
- /* setup info for port */
- port->dev = &platdev->dev;
- ourport->info = info;
-
- /* copy the info in from provided structure */
- ourport->port.fifosize = info->fifosize;
-
- dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport);
-
- port->uartclk = 1;
-
- if (cfg->uart_flags & UPF_CONS_FLOW) {
- dbg("s3c24xx_serial_init_port: enabling flow control\n");
- port->flags |= UPF_CONS_FLOW;
- }
-
- /* sort our the physical and virtual addresses for each UART */
-
- res = platform_get_resource(platdev, IORESOURCE_MEM, 0);
- if (res == NULL) {
- printk(KERN_ERR "failed to find memory resource for uart\n");
- return -EINVAL;
- }
-
- dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
-
- port->mapbase = res->start;
- port->membase = S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART);
- ret = platform_get_irq(platdev, 0);
- if (ret < 0)
- port->irq = 0;
- else
- port->irq = ret;
-
- ourport->clk = clk_get(&platdev->dev, "uart");
-
- dbg("port: map=%08x, mem=%08x, irq=%d, clock=%ld\n",
- port->mapbase, port->membase, port->irq, port->uartclk);
-
- /* reset the fifos (and setup the uart) */
- s3c24xx_serial_resetport(port, cfg);
- return 0;
-}
-
-/* Device driver serial port probe */
-
-static int probe_index = 0;
-
-static int s3c24xx_serial_probe(struct platform_device *dev,
- struct s3c24xx_uart_info *info)
-{
- struct s3c24xx_uart_port *ourport;
- int ret;
-
- dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index);
-
- ourport = &s3c24xx_serial_ports[probe_index];
- probe_index++;
-
- dbg("%s: initialising port %p...\n", __func__, ourport);
-
- ret = s3c24xx_serial_init_port(ourport, info, dev);
- if (ret < 0)
- goto probe_err;
-
- dbg("%s: adding port\n", __func__);
- uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
- platform_set_drvdata(dev, &ourport->port);
-
- return 0;
-
- probe_err:
- return ret;
-}
-
-static int s3c24xx_serial_remove(struct platform_device *dev)
-{
- struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
-
- if (port)
- uart_remove_one_port(&s3c24xx_uart_drv, port);
-
- return 0;
-}
-
-/* UART power management code */
-
-#ifdef CONFIG_PM
-
-static int s3c24xx_serial_suspend(struct platform_device *dev, pm_message_t state)
-{
- struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
-
- if (port)
- uart_suspend_port(&s3c24xx_uart_drv, port);
-
- return 0;
-}
-
-static int s3c24xx_serial_resume(struct platform_device *dev)
-{
- struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
- struct s3c24xx_uart_port *ourport = to_ourport(port);
-
- if (port) {
- clk_enable(ourport->clk);
- s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
- clk_disable(ourport->clk);
-
- uart_resume_port(&s3c24xx_uart_drv, port);
- }
-
- return 0;
-}
-
-#else
-#define s3c24xx_serial_suspend NULL
-#define s3c24xx_serial_resume NULL
-#endif
-
-static int s3c24xx_serial_init(struct platform_driver *drv,
- struct s3c24xx_uart_info *info)
-{
- dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
- return platform_driver_register(drv);
-}
-
-
-/* now comes the code to initialise either the s3c2410 or s3c2440 serial
- * port information
-*/
-
-/* cpu specific variations on the serial port support */
-
-#ifdef CONFIG_CPU_S3C2400
-
-static int s3c2400_serial_getsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- clk->divisor = 1;
- clk->name = "pclk";
-
- return 0;
-}
-
-static int s3c2400_serial_setsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- return 0;
-}
-
-static int s3c2400_serial_resetport(struct uart_port *port,
- struct s3c2410_uartcfg *cfg)
-{
- dbg("s3c2400_serial_resetport: port=%p (%08lx), cfg=%p\n",
- port, port->mapbase, cfg);
-
- wr_regl(port, S3C2410_UCON, cfg->ucon);
- wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
- /* reset both fifos */
-
- wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
- wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
- return 0;
-}
-
-static struct s3c24xx_uart_info s3c2400_uart_inf = {
- .name = "Samsung S3C2400 UART",
- .type = PORT_S3C2400,
- .fifosize = 16,
- .rx_fifomask = S3C2410_UFSTAT_RXMASK,
- .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
- .rx_fifofull = S3C2410_UFSTAT_RXFULL,
- .tx_fifofull = S3C2410_UFSTAT_TXFULL,
- .tx_fifomask = S3C2410_UFSTAT_TXMASK,
- .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT,
- .get_clksrc = s3c2400_serial_getsource,
- .set_clksrc = s3c2400_serial_setsource,
- .reset_port = s3c2400_serial_resetport,
-};
-
-static int s3c2400_serial_probe(struct platform_device *dev)
-{
- return s3c24xx_serial_probe(dev, &s3c2400_uart_inf);
-}
-
-static struct platform_driver s3c2400_serial_drv = {
- .probe = s3c2400_serial_probe,
- .remove = s3c24xx_serial_remove,
- .suspend = s3c24xx_serial_suspend,
- .resume = s3c24xx_serial_resume,
- .driver = {
- .name = "s3c2400-uart",
- .owner = THIS_MODULE,
- },
-};
-
-static inline int s3c2400_serial_init(void)
-{
- return s3c24xx_serial_init(&s3c2400_serial_drv, &s3c2400_uart_inf);
-}
-
-static inline void s3c2400_serial_exit(void)
-{
- platform_driver_unregister(&s3c2400_serial_drv);
-}
-
-#define s3c2400_uart_inf_at &s3c2400_uart_inf
-#else
-
-static inline int s3c2400_serial_init(void)
-{
- return 0;
-}
-
-static inline void s3c2400_serial_exit(void)
-{
-}
-
-#define s3c2400_uart_inf_at NULL
-
-#endif /* CONFIG_CPU_S3C2400 */
-
-/* S3C2410 support */
-
-#ifdef CONFIG_CPU_S3C2410
+#include "samsung.h"
static int s3c2410_serial_setsource(struct uart_port *port,
struct s3c24xx_uart_clksrc *clk)
@@ -1323,8 +83,6 @@ static struct s3c24xx_uart_info s3c2410_uart_inf = {
.reset_port = s3c2410_serial_resetport,
};
-/* device management */
-
static int s3c2410_serial_probe(struct platform_device *dev)
{
return s3c24xx_serial_probe(dev, &s3c2410_uart_inf);
@@ -1333,612 +91,28 @@ static int s3c2410_serial_probe(struct platform_device *dev)
static struct platform_driver s3c2410_serial_drv = {
.probe = s3c2410_serial_probe,
.remove = s3c24xx_serial_remove,
- .suspend = s3c24xx_serial_suspend,
- .resume = s3c24xx_serial_resume,
.driver = {
.name = "s3c2410-uart",
.owner = THIS_MODULE,
},
};
-static inline int s3c2410_serial_init(void)
+s3c24xx_console_init(&s3c2410_serial_drv, &s3c2410_uart_inf);
+
+static int __init s3c2410_serial_init(void)
{
return s3c24xx_serial_init(&s3c2410_serial_drv, &s3c2410_uart_inf);
}
-static inline void s3c2410_serial_exit(void)
+static void __exit s3c2410_serial_exit(void)
{
platform_driver_unregister(&s3c2410_serial_drv);
}
-#define s3c2410_uart_inf_at &s3c2410_uart_inf
-#else
-
-static inline int s3c2410_serial_init(void)
-{
- return 0;
-}
-
-static inline void s3c2410_serial_exit(void)
-{
-}
-
-#define s3c2410_uart_inf_at NULL
-
-#endif /* CONFIG_CPU_S3C2410 */
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-
-static int s3c2440_serial_setsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- // todo - proper fclk<>nonfclk switch //
-
- ucon &= ~S3C2440_UCON_CLKMASK;
-
- if (strcmp(clk->name, "uclk") == 0)
- ucon |= S3C2440_UCON_UCLK;
- else if (strcmp(clk->name, "pclk") == 0)
- ucon |= S3C2440_UCON_PCLK;
- else if (strcmp(clk->name, "fclk") == 0)
- ucon |= S3C2440_UCON_FCLK;
- else {
- printk(KERN_ERR "unknown clock source %s\n", clk->name);
- return -EINVAL;
- }
-
- wr_regl(port, S3C2410_UCON, ucon);
- return 0;
-}
-
-
-static int s3c2440_serial_getsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
- unsigned long ucon0, ucon1, ucon2;
-
- switch (ucon & S3C2440_UCON_CLKMASK) {
- case S3C2440_UCON_UCLK:
- clk->divisor = 1;
- clk->name = "uclk";
- break;
-
- case S3C2440_UCON_PCLK:
- case S3C2440_UCON_PCLK2:
- clk->divisor = 1;
- clk->name = "pclk";
- break;
-
- case S3C2440_UCON_FCLK:
- /* the fun of calculating the uart divisors on
- * the s3c2440 */
-
- ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
- ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
- ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
-
- printk("ucons: %08lx, %08lx, %08lx\n", ucon0, ucon1, ucon2);
-
- ucon0 &= S3C2440_UCON0_DIVMASK;
- ucon1 &= S3C2440_UCON1_DIVMASK;
- ucon2 &= S3C2440_UCON2_DIVMASK;
-
- if (ucon0 != 0) {
- clk->divisor = ucon0 >> S3C2440_UCON_DIVSHIFT;
- clk->divisor += 6;
- } else if (ucon1 != 0) {
- clk->divisor = ucon1 >> S3C2440_UCON_DIVSHIFT;
- clk->divisor += 21;
- } else if (ucon2 != 0) {
- clk->divisor = ucon2 >> S3C2440_UCON_DIVSHIFT;
- clk->divisor += 36;
- } else {
- /* manual calims 44, seems to be 9 */
- clk->divisor = 9;
- }
-
- clk->name = "fclk";
- break;
- }
-
- return 0;
-}
-
-static int s3c2440_serial_resetport(struct uart_port *port,
- struct s3c2410_uartcfg *cfg)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- dbg("s3c2440_serial_resetport: port=%p (%08lx), cfg=%p\n",
- port, port->mapbase, cfg);
-
- /* ensure we don't change the clock settings... */
-
- ucon &= (S3C2440_UCON0_DIVMASK | (3<<10));
-
- wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
- wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
- /* reset both fifos */
-
- wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
- wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
- return 0;
-}
-
-static struct s3c24xx_uart_info s3c2440_uart_inf = {
- .name = "Samsung S3C2440 UART",
- .type = PORT_S3C2440,
- .fifosize = 64,
- .rx_fifomask = S3C2440_UFSTAT_RXMASK,
- .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
- .rx_fifofull = S3C2440_UFSTAT_RXFULL,
- .tx_fifofull = S3C2440_UFSTAT_TXFULL,
- .tx_fifomask = S3C2440_UFSTAT_TXMASK,
- .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
- .get_clksrc = s3c2440_serial_getsource,
- .set_clksrc = s3c2440_serial_setsource,
- .reset_port = s3c2440_serial_resetport,
-};
-
-/* device management */
-
-static int s3c2440_serial_probe(struct platform_device *dev)
-{
- dbg("s3c2440_serial_probe: dev=%p\n", dev);
- return s3c24xx_serial_probe(dev, &s3c2440_uart_inf);
-}
-
-static struct platform_driver s3c2440_serial_drv = {
- .probe = s3c2440_serial_probe,
- .remove = s3c24xx_serial_remove,
- .suspend = s3c24xx_serial_suspend,
- .resume = s3c24xx_serial_resume,
- .driver = {
- .name = "s3c2440-uart",
- .owner = THIS_MODULE,
- },
-};
-
-
-static inline int s3c2440_serial_init(void)
-{
- return s3c24xx_serial_init(&s3c2440_serial_drv, &s3c2440_uart_inf);
-}
-
-static inline void s3c2440_serial_exit(void)
-{
- platform_driver_unregister(&s3c2440_serial_drv);
-}
-
-#define s3c2440_uart_inf_at &s3c2440_uart_inf
-#else
-
-static inline int s3c2440_serial_init(void)
-{
- return 0;
-}
-
-static inline void s3c2440_serial_exit(void)
-{
-}
-
-#define s3c2440_uart_inf_at NULL
-#endif /* CONFIG_CPU_S3C2440 */
-
-#if defined(CONFIG_CPU_S3C2412)
-
-static int s3c2412_serial_setsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- ucon &= ~S3C2412_UCON_CLKMASK;
-
- if (strcmp(clk->name, "uclk") == 0)
- ucon |= S3C2440_UCON_UCLK;
- else if (strcmp(clk->name, "pclk") == 0)
- ucon |= S3C2440_UCON_PCLK;
- else if (strcmp(clk->name, "usysclk") == 0)
- ucon |= S3C2412_UCON_USYSCLK;
- else {
- printk(KERN_ERR "unknown clock source %s\n", clk->name);
- return -EINVAL;
- }
-
- wr_regl(port, S3C2410_UCON, ucon);
- return 0;
-}
-
-
-static int s3c2412_serial_getsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- switch (ucon & S3C2412_UCON_CLKMASK) {
- case S3C2412_UCON_UCLK:
- clk->divisor = 1;
- clk->name = "uclk";
- break;
-
- case S3C2412_UCON_PCLK:
- case S3C2412_UCON_PCLK2:
- clk->divisor = 1;
- clk->name = "pclk";
- break;
-
- case S3C2412_UCON_USYSCLK:
- clk->divisor = 1;
- clk->name = "usysclk";
- break;
- }
-
- return 0;
-}
-
-static int s3c2412_serial_resetport(struct uart_port *port,
- struct s3c2410_uartcfg *cfg)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- dbg("%s: port=%p (%08lx), cfg=%p\n",
- __func__, port, port->mapbase, cfg);
-
- /* ensure we don't change the clock settings... */
-
- ucon &= S3C2412_UCON_CLKMASK;
-
- wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
- wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
- /* reset both fifos */
-
- wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
- wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
- return 0;
-}
-
-static struct s3c24xx_uart_info s3c2412_uart_inf = {
- .name = "Samsung S3C2412 UART",
- .type = PORT_S3C2412,
- .fifosize = 64,
- .rx_fifomask = S3C2440_UFSTAT_RXMASK,
- .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
- .rx_fifofull = S3C2440_UFSTAT_RXFULL,
- .tx_fifofull = S3C2440_UFSTAT_TXFULL,
- .tx_fifomask = S3C2440_UFSTAT_TXMASK,
- .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
- .get_clksrc = s3c2412_serial_getsource,
- .set_clksrc = s3c2412_serial_setsource,
- .reset_port = s3c2412_serial_resetport,
-};
-
-/* device management */
-
-static int s3c2412_serial_probe(struct platform_device *dev)
-{
- dbg("s3c2440_serial_probe: dev=%p\n", dev);
- return s3c24xx_serial_probe(dev, &s3c2412_uart_inf);
-}
-
-static struct platform_driver s3c2412_serial_drv = {
- .probe = s3c2412_serial_probe,
- .remove = s3c24xx_serial_remove,
- .suspend = s3c24xx_serial_suspend,
- .resume = s3c24xx_serial_resume,
- .driver = {
- .name = "s3c2412-uart",
- .owner = THIS_MODULE,
- },
-};
-
-
-static inline int s3c2412_serial_init(void)
-{
- return s3c24xx_serial_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
-}
-
-static inline void s3c2412_serial_exit(void)
-{
- platform_driver_unregister(&s3c2412_serial_drv);
-}
-
-#define s3c2412_uart_inf_at &s3c2412_uart_inf
-#else
-
-static inline int s3c2412_serial_init(void)
-{
- return 0;
-}
-
-static inline void s3c2412_serial_exit(void)
-{
-}
-
-#define s3c2412_uart_inf_at NULL
-#endif /* CONFIG_CPU_S3C2440 */
-
-
-/* module initialisation code */
-
-static int __init s3c24xx_serial_modinit(void)
-{
- int ret;
-
- ret = uart_register_driver(&s3c24xx_uart_drv);
- if (ret < 0) {
- printk(KERN_ERR "failed to register UART driver\n");
- return -1;
- }
-
- s3c2400_serial_init();
- s3c2410_serial_init();
- s3c2412_serial_init();
- s3c2440_serial_init();
-
- return 0;
-}
-
-static void __exit s3c24xx_serial_modexit(void)
-{
- s3c2400_serial_exit();
- s3c2410_serial_exit();
- s3c2412_serial_exit();
- s3c2440_serial_exit();
-
- uart_unregister_driver(&s3c24xx_uart_drv);
-}
-
-
-module_init(s3c24xx_serial_modinit);
-module_exit(s3c24xx_serial_modexit);
-
-/* Console code */
-
-#ifdef CONFIG_SERIAL_S3C2410_CONSOLE
-
-static struct uart_port *cons_uart;
-
-static int
-s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
-{
- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
- unsigned long ufstat, utrstat;
-
- if (ufcon & S3C2410_UFCON_FIFOMODE) {
- /* fifo mode - check ammount of data in fifo registers... */
-
- ufstat = rd_regl(port, S3C2410_UFSTAT);
- return (ufstat & info->tx_fifofull) ? 0 : 1;
- }
-
- /* in non-fifo mode, we go and use the tx buffer empty */
-
- utrstat = rd_regl(port, S3C2410_UTRSTAT);
- return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0;
-}
-
-static void
-s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
-{
- unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
- while (!s3c24xx_serial_console_txrdy(port, ufcon))
- barrier();
- wr_regb(cons_uart, S3C2410_UTXH, ch);
-}
-
-static void
-s3c24xx_serial_console_write(struct console *co, const char *s,
- unsigned int count)
-{
- uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar);
-}
-
-static void __init
-s3c24xx_serial_get_options(struct uart_port *port, int *baud,
- int *parity, int *bits)
-{
- struct s3c24xx_uart_clksrc clksrc;
- struct clk *clk;
- unsigned int ulcon;
- unsigned int ucon;
- unsigned int ubrdiv;
- unsigned long rate;
-
- ulcon = rd_regl(port, S3C2410_ULCON);
- ucon = rd_regl(port, S3C2410_UCON);
- ubrdiv = rd_regl(port, S3C2410_UBRDIV);
-
- dbg("s3c24xx_serial_get_options: port=%p\n"
- "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n",
- port, ulcon, ucon, ubrdiv);
-
- if ((ucon & 0xf) != 0) {
- /* consider the serial port configured if the tx/rx mode set */
-
- switch (ulcon & S3C2410_LCON_CSMASK) {
- case S3C2410_LCON_CS5:
- *bits = 5;
- break;
- case S3C2410_LCON_CS6:
- *bits = 6;
- break;
- case S3C2410_LCON_CS7:
- *bits = 7;
- break;
- default:
- case S3C2410_LCON_CS8:
- *bits = 8;
- break;
- }
-
- switch (ulcon & S3C2410_LCON_PMASK) {
- case S3C2410_LCON_PEVEN:
- *parity = 'e';
- break;
-
- case S3C2410_LCON_PODD:
- *parity = 'o';
- break;
-
- case S3C2410_LCON_PNONE:
- default:
- *parity = 'n';
- }
-
- /* now calculate the baud rate */
-
- s3c24xx_serial_getsource(port, &clksrc);
-
- clk = clk_get(port->dev, clksrc.name);
- if (!IS_ERR(clk) && clk != NULL)
- rate = clk_get_rate(clk) / clksrc.divisor;
- else
- rate = 1;
-
-
- *baud = rate / ( 16 * (ubrdiv + 1));
- dbg("calculated baud %d\n", *baud);
- }
-
-}
-
-/* s3c24xx_serial_init_ports
- *
- * initialise the serial ports from the machine provided initialisation
- * data.
-*/
-
-static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
-{
- struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports;
- struct platform_device **platdev_ptr;
- int i;
-
- dbg("s3c24xx_serial_init_ports: initialising ports...\n");
-
- platdev_ptr = s3c24xx_uart_devs;
-
- for (i = 0; i < NR_PORTS; i++, ptr++, platdev_ptr++) {
- s3c24xx_serial_init_port(ptr, info, *platdev_ptr);
- }
-
- return 0;
-}
-
-static int __init
-s3c24xx_serial_console_setup(struct console *co, char *options)
-{
- struct uart_port *port;
- int baud = 9600;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- dbg("s3c24xx_serial_console_setup: co=%p (%d), %s\n",
- co, co->index, options);
-
- /* is this a valid port */
-
- if (co->index == -1 || co->index >= NR_PORTS)
- co->index = 0;
-
- port = &s3c24xx_serial_ports[co->index].port;
-
- /* is the port configured? */
-
- if (port->mapbase == 0x0) {
- co->index = 0;
- port = &s3c24xx_serial_ports[co->index].port;
- }
-
- cons_uart = port;
-
- dbg("s3c24xx_serial_console_setup: port=%p (%d)\n", port, co->index);
-
- /*
- * Check whether an invalid uart number has been specified, and
- * if so, search for the first available port that does have
- * console support.
- */
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
- else
- s3c24xx_serial_get_options(port, &baud, &parity, &bits);
-
- dbg("s3c24xx_serial_console_setup: baud %d\n", baud);
-
- return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-/* s3c24xx_serial_initconsole
- *
- * initialise the console from one of the uart drivers
-*/
-
-static struct console s3c24xx_serial_console =
-{
- .name = S3C24XX_SERIAL_NAME,
- .device = uart_console_device,
- .flags = CON_PRINTBUFFER,
- .index = -1,
- .write = s3c24xx_serial_console_write,
- .setup = s3c24xx_serial_console_setup
-};
-
-static int s3c24xx_serial_initconsole(void)
-{
- struct s3c24xx_uart_info *info;
- struct platform_device *dev = s3c24xx_uart_devs[0];
-
- dbg("s3c24xx_serial_initconsole\n");
-
- /* select driver based on the cpu */
-
- if (dev == NULL) {
- printk(KERN_ERR "s3c24xx: no devices for console init\n");
- return 0;
- }
-
- if (strcmp(dev->name, "s3c2400-uart") == 0) {
- info = s3c2400_uart_inf_at;
- } else if (strcmp(dev->name, "s3c2410-uart") == 0) {
- info = s3c2410_uart_inf_at;
- } else if (strcmp(dev->name, "s3c2440-uart") == 0) {
- info = s3c2440_uart_inf_at;
- } else if (strcmp(dev->name, "s3c2412-uart") == 0) {
- info = s3c2412_uart_inf_at;
- } else {
- printk(KERN_ERR "s3c24xx: no driver for %s\n", dev->name);
- return 0;
- }
-
- if (info == NULL) {
- printk(KERN_ERR "s3c24xx: no driver for console\n");
- return 0;
- }
-
- s3c24xx_serial_console.data = &s3c24xx_uart_drv;
- s3c24xx_serial_init_ports(info);
-
- register_console(&s3c24xx_serial_console);
- return 0;
-}
-
-console_initcall(s3c24xx_serial_initconsole);
-
-#endif /* CONFIG_SERIAL_S3C2410_CONSOLE */
+module_init(s3c2410_serial_init);
+module_exit(s3c2410_serial_exit);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("Samsung S3C2410/S3C2440/S3C2412 Serial port driver");
-MODULE_ALIAS("platform:s3c2400-uart");
+MODULE_DESCRIPTION("Samsung S3C2410 SoC Serial port driver");
MODULE_ALIAS("platform:s3c2410-uart");
-MODULE_ALIAS("platform:s3c2412-uart");
-MODULE_ALIAS("platform:s3c2440-uart");
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
new file mode 100644
index 000000000000..ce0c220e3e92
--- /dev/null
+++ b/drivers/serial/s3c2412.c
@@ -0,0 +1,151 @@
+/* linux/drivers/serial/s3c2412.c
+ *
+ * Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs.
+ *
+ * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/irq.h>
+#include <asm/hardware.h>
+
+#include <asm/plat-s3c/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+
+#include "samsung.h"
+
+static int s3c2412_serial_setsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+ ucon &= ~S3C2412_UCON_CLKMASK;
+
+ if (strcmp(clk->name, "uclk") == 0)
+ ucon |= S3C2440_UCON_UCLK;
+ else if (strcmp(clk->name, "pclk") == 0)
+ ucon |= S3C2440_UCON_PCLK;
+ else if (strcmp(clk->name, "usysclk") == 0)
+ ucon |= S3C2412_UCON_USYSCLK;
+ else {
+ printk(KERN_ERR "unknown clock source %s\n", clk->name);
+ return -EINVAL;
+ }
+
+ wr_regl(port, S3C2410_UCON, ucon);
+ return 0;
+}
+
+
+static int s3c2412_serial_getsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+ switch (ucon & S3C2412_UCON_CLKMASK) {
+ case S3C2412_UCON_UCLK:
+ clk->divisor = 1;
+ clk->name = "uclk";
+ break;
+
+ case S3C2412_UCON_PCLK:
+ case S3C2412_UCON_PCLK2:
+ clk->divisor = 1;
+ clk->name = "pclk";
+ break;
+
+ case S3C2412_UCON_USYSCLK:
+ clk->divisor = 1;
+ clk->name = "usysclk";
+ break;
+ }
+
+ return 0;
+}
+
+static int s3c2412_serial_resetport(struct uart_port *port,
+ struct s3c2410_uartcfg *cfg)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+ dbg("%s: port=%p (%08lx), cfg=%p\n",
+ __func__, port, port->mapbase, cfg);
+
+ /* ensure we don't change the clock settings... */
+
+ ucon &= S3C2412_UCON_CLKMASK;
+
+ wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
+ wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+ /* reset both fifos */
+
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+ return 0;
+}
+
+static struct s3c24xx_uart_info s3c2412_uart_inf = {
+ .name = "Samsung S3C2412 UART",
+ .type = PORT_S3C2412,
+ .fifosize = 64,
+ .rx_fifomask = S3C2440_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C2440_UFSTAT_RXFULL,
+ .tx_fifofull = S3C2440_UFSTAT_TXFULL,
+ .tx_fifomask = S3C2440_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
+ .get_clksrc = s3c2412_serial_getsource,
+ .set_clksrc = s3c2412_serial_setsource,
+ .reset_port = s3c2412_serial_resetport,
+};
+
+/* device management */
+
+static int s3c2412_serial_probe(struct platform_device *dev)
+{
+ dbg("s3c2440_serial_probe: dev=%p\n", dev);
+ return s3c24xx_serial_probe(dev, &s3c2412_uart_inf);
+}
+
+static struct platform_driver s3c2412_serial_drv = {
+ .probe = s3c2412_serial_probe,
+ .remove = s3c24xx_serial_remove,
+ .driver = {
+ .name = "s3c2412-uart",
+ .owner = THIS_MODULE,
+ },
+};
+
+s3c24xx_console_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
+
+static inline int s3c2412_serial_init(void)
+{
+ return s3c24xx_serial_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
+}
+
+static inline void s3c2412_serial_exit(void)
+{
+ platform_driver_unregister(&s3c2412_serial_drv);
+}
+
+module_init(s3c2412_serial_init);
+module_exit(s3c2412_serial_exit);
+
+MODULE_DESCRIPTION("Samsung S3C2412,S3C2413 SoC Serial port driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:s3c2412-uart");
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c
new file mode 100644
index 000000000000..38f954bd39c6
--- /dev/null
+++ b/drivers/serial/s3c2440.c
@@ -0,0 +1,181 @@
+/* linux/drivers/serial/s3c2440.c
+ *
+ * Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs.
+ *
+ * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/irq.h>
+#include <asm/hardware.h>
+
+#include <asm/plat-s3c/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+
+#include "samsung.h"
+
+
+static int s3c2440_serial_setsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+ /* todo - proper fclk<>nonfclk switch. */
+
+ ucon &= ~S3C2440_UCON_CLKMASK;
+
+ if (strcmp(clk->name, "uclk") == 0)
+ ucon |= S3C2440_UCON_UCLK;
+ else if (strcmp(clk->name, "pclk") == 0)
+ ucon |= S3C2440_UCON_PCLK;
+ else if (strcmp(clk->name, "fclk") == 0)
+ ucon |= S3C2440_UCON_FCLK;
+ else {
+ printk(KERN_ERR "unknown clock source %s\n", clk->name);
+ return -EINVAL;
+ }
+
+ wr_regl(port, S3C2410_UCON, ucon);
+ return 0;
+}
+
+
+static int s3c2440_serial_getsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+ unsigned long ucon0, ucon1, ucon2;
+
+ switch (ucon & S3C2440_UCON_CLKMASK) {
+ case S3C2440_UCON_UCLK:
+ clk->divisor = 1;
+ clk->name = "uclk";
+ break;
+
+ case S3C2440_UCON_PCLK:
+ case S3C2440_UCON_PCLK2:
+ clk->divisor = 1;
+ clk->name = "pclk";
+ break;
+
+ case S3C2440_UCON_FCLK:
+ /* the fun of calculating the uart divisors on
+ * the s3c2440 */
+
+ ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
+ ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
+ ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
+
+ printk("ucons: %08lx, %08lx, %08lx\n", ucon0, ucon1, ucon2);
+
+ ucon0 &= S3C2440_UCON0_DIVMASK;
+ ucon1 &= S3C2440_UCON1_DIVMASK;
+ ucon2 &= S3C2440_UCON2_DIVMASK;
+
+ if (ucon0 != 0) {
+ clk->divisor = ucon0 >> S3C2440_UCON_DIVSHIFT;
+ clk->divisor += 6;
+ } else if (ucon1 != 0) {
+ clk->divisor = ucon1 >> S3C2440_UCON_DIVSHIFT;
+ clk->divisor += 21;
+ } else if (ucon2 != 0) {
+ clk->divisor = ucon2 >> S3C2440_UCON_DIVSHIFT;
+ clk->divisor += 36;
+ } else {
+ /* manual calims 44, seems to be 9 */
+ clk->divisor = 9;
+ }
+
+ clk->name = "fclk";
+ break;
+ }
+
+ return 0;
+}
+
+static int s3c2440_serial_resetport(struct uart_port *port,
+ struct s3c2410_uartcfg *cfg)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+ dbg("s3c2440_serial_resetport: port=%p (%08lx), cfg=%p\n",
+ port, port->mapbase, cfg);
+
+ /* ensure we don't change the clock settings... */
+
+ ucon &= (S3C2440_UCON0_DIVMASK | (3<<10));
+
+ wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
+ wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+ /* reset both fifos */
+
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+ return 0;
+}
+
+static struct s3c24xx_uart_info s3c2440_uart_inf = {
+ .name = "Samsung S3C2440 UART",
+ .type = PORT_S3C2440,
+ .fifosize = 64,
+ .rx_fifomask = S3C2440_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C2440_UFSTAT_RXFULL,
+ .tx_fifofull = S3C2440_UFSTAT_TXFULL,
+ .tx_fifomask = S3C2440_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
+ .get_clksrc = s3c2440_serial_getsource,
+ .set_clksrc = s3c2440_serial_setsource,
+ .reset_port = s3c2440_serial_resetport,
+};
+
+/* device management */
+
+static int s3c2440_serial_probe(struct platform_device *dev)
+{
+ dbg("s3c2440_serial_probe: dev=%p\n", dev);
+ return s3c24xx_serial_probe(dev, &s3c2440_uart_inf);
+}
+
+static struct platform_driver s3c2440_serial_drv = {
+ .probe = s3c2440_serial_probe,
+ .remove = s3c24xx_serial_remove,
+ .driver = {
+ .name = "s3c2440-uart",
+ .owner = THIS_MODULE,
+ },
+};
+
+s3c24xx_console_init(&s3c2440_serial_drv, &s3c2440_uart_inf);
+
+static int __init s3c2440_serial_init(void)
+{
+ return s3c24xx_serial_init(&s3c2440_serial_drv, &s3c2440_uart_inf);
+}
+
+static void __exit s3c2440_serial_exit(void)
+{
+ platform_driver_unregister(&s3c2440_serial_drv);
+}
+
+module_init(s3c2440_serial_init);
+module_exit(s3c2440_serial_exit);
+
+MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPLi v2");
+MODULE_ALIAS("platform:s3c2440-uart");
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
new file mode 100644
index 000000000000..4a3ecaa629e6
--- /dev/null
+++ b/drivers/serial/samsung.c
@@ -0,0 +1,1317 @@
+/* linux/drivers/serial/samsuing.c
+ *
+ * Driver core for Samsung SoC onboard UARTs.
+ *
+ * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Hote on 2410 error handling
+ *
+ * The s3c2410 manual has a love/hate affair with the contents of the
+ * UERSTAT register in the UART blocks, and keeps marking some of the
+ * error bits as reserved. Having checked with the s3c2410x01,
+ * it copes with BREAKs properly, so I am happy to ignore the RESERVED
+ * feature from the latter versions of the manual.
+ *
+ * If it becomes aparrent that latter versions of the 2410 remove these
+ * bits, then action will have to be taken to differentiate the versions
+ * and change the policy on BREAK
+ *
+ * BJD, 04-Nov-2004
+*/
+
+#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/sysrq.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+
+#include <asm/irq.h>
+
+#include <asm/hardware.h>
+
+#include <asm/plat-s3c/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+
+#include "samsung.h"
+
+/* UART name and device definitions */
+
+#define S3C24XX_SERIAL_NAME "ttySAC"
+#define S3C24XX_SERIAL_MAJOR 204
+#define S3C24XX_SERIAL_MINOR 64
+
+/* we can support 3 uarts, but not always use them */
+
+#ifdef CONFIG_CPU_S3C2400
+#define NR_PORTS (2)
+#else
+#define NR_PORTS (3)
+#endif
+
+/* port irq numbers */
+
+#define TX_IRQ(port) ((port)->irq + 1)
+#define RX_IRQ(port) ((port)->irq)
+
+/* macros to change one thing to another */
+
+#define tx_enabled(port) ((port)->unused[0])
+#define rx_enabled(port) ((port)->unused[1])
+
+/* flag to ignore all characters comming in */
+#define RXSTAT_DUMMY_READ (0x10000000)
+
+static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
+{
+ return container_of(port, struct s3c24xx_uart_port, port);
+}
+
+/* translate a port to the device name */
+
+static inline const char *s3c24xx_serial_portname(struct uart_port *port)
+{
+ return to_platform_device(port->dev)->name;
+}
+
+static int s3c24xx_serial_txempty_nofifo(struct uart_port *port)
+{
+ return (rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE);
+}
+
+static void s3c24xx_serial_rx_enable(struct uart_port *port)
+{
+ unsigned long flags;
+ unsigned int ucon, ufcon;
+ int count = 10000;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ while (--count && !s3c24xx_serial_txempty_nofifo(port))
+ udelay(100);
+
+ ufcon = rd_regl(port, S3C2410_UFCON);
+ ufcon |= S3C2410_UFCON_RESETRX;
+ wr_regl(port, S3C2410_UFCON, ufcon);
+
+ ucon = rd_regl(port, S3C2410_UCON);
+ ucon |= S3C2410_UCON_RXIRQMODE;
+ wr_regl(port, S3C2410_UCON, ucon);
+
+ rx_enabled(port) = 1;
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void s3c24xx_serial_rx_disable(struct uart_port *port)
+{
+ unsigned long flags;
+ unsigned int ucon;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ ucon = rd_regl(port, S3C2410_UCON);
+ ucon &= ~S3C2410_UCON_RXIRQMODE;
+ wr_regl(port, S3C2410_UCON, ucon);
+
+ rx_enabled(port) = 0;
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void s3c24xx_serial_stop_tx(struct uart_port *port)
+{
+ if (tx_enabled(port)) {
+ disable_irq(TX_IRQ(port));
+ tx_enabled(port) = 0;
+ if (port->flags & UPF_CONS_FLOW)
+ s3c24xx_serial_rx_enable(port);
+ }
+}
+
+static void s3c24xx_serial_start_tx(struct uart_port *port)
+{
+ if (!tx_enabled(port)) {
+ if (port->flags & UPF_CONS_FLOW)
+ s3c24xx_serial_rx_disable(port);
+
+ enable_irq(TX_IRQ(port));
+ tx_enabled(port) = 1;
+ }
+}
+
+
+static void s3c24xx_serial_stop_rx(struct uart_port *port)
+{
+ if (rx_enabled(port)) {
+ dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
+ disable_irq(RX_IRQ(port));
+ rx_enabled(port) = 0;
+ }
+}
+
+static void s3c24xx_serial_enable_ms(struct uart_port *port)
+{
+}
+
+static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *port)
+{
+ return to_ourport(port)->info;
+}
+
+static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port)
+{
+ if (port->dev == NULL)
+ return NULL;
+
+ return (struct s3c2410_uartcfg *)port->dev->platform_data;
+}
+
+static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
+ unsigned long ufstat)
+{
+ struct s3c24xx_uart_info *info = ourport->info;
+
+ if (ufstat & info->rx_fifofull)
+ return info->fifosize;
+
+ return (ufstat & info->rx_fifomask) >> info->rx_fifoshift;
+}
+
+
+/* ? - where has parity gone?? */
+#define S3C2410_UERSTAT_PARITY (0x1000)
+
+static irqreturn_t
+s3c24xx_serial_rx_chars(int irq, void *dev_id)
+{
+ struct s3c24xx_uart_port *ourport = dev_id;
+ struct uart_port *port = &ourport->port;
+ struct tty_struct *tty = port->info->tty;
+ unsigned int ufcon, ch, flag, ufstat, uerstat;
+ int max_count = 64;
+
+ while (max_count-- > 0) {
+ ufcon = rd_regl(port, S3C2410_UFCON);
+ ufstat = rd_regl(port, S3C2410_UFSTAT);
+
+ if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
+ break;
+
+ uerstat = rd_regl(port, S3C2410_UERSTAT);
+ ch = rd_regb(port, S3C2410_URXH);
+
+ if (port->flags & UPF_CONS_FLOW) {
+ int txe = s3c24xx_serial_txempty_nofifo(port);
+
+ if (rx_enabled(port)) {
+ if (!txe) {
+ rx_enabled(port) = 0;
+ continue;
+ }
+ } else {
+ if (txe) {
+ ufcon |= S3C2410_UFCON_RESETRX;
+ wr_regl(port, S3C2410_UFCON, ufcon);
+ rx_enabled(port) = 1;
+ goto out;
+ }
+ continue;
+ }
+ }
+
+ /* insert the character into the buffer */
+
+ flag = TTY_NORMAL;
+ port->icount.rx++;
+
+ if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) {
+ dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n",
+ ch, uerstat);
+
+ /* check for break */
+ if (uerstat & S3C2410_UERSTAT_BREAK) {
+ dbg("break!\n");
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ goto ignore_char;
+ }
+
+ if (uerstat & S3C2410_UERSTAT_FRAME)
+ port->icount.frame++;
+ if (uerstat & S3C2410_UERSTAT_OVERRUN)
+ port->icount.overrun++;
+
+ uerstat &= port->read_status_mask;
+
+ if (uerstat & S3C2410_UERSTAT_BREAK)
+ flag = TTY_BREAK;
+ else if (uerstat & S3C2410_UERSTAT_PARITY)
+ flag = TTY_PARITY;
+ else if (uerstat & (S3C2410_UERSTAT_FRAME |
+ S3C2410_UERSTAT_OVERRUN))
+ flag = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(port, ch))
+ goto ignore_char;
+
+ uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN,
+ ch, flag);
+
+ ignore_char:
+ continue;
+ }
+ tty_flip_buffer_push(tty);
+
+ out:
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
+{
+ struct s3c24xx_uart_port *ourport = id;
+ struct uart_port *port = &ourport->port;
+ struct circ_buf *xmit = &port->info->xmit;
+ int count = 256;
+
+ if (port->x_char) {
+ wr_regb(port, S3C2410_UTXH, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ goto out;
+ }
+
+ /* if there isnt anything more to transmit, or the uart is now
+ * stopped, disable the uart and exit
+ */
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ s3c24xx_serial_stop_tx(port);
+ goto out;
+ }
+
+ /* try and drain the buffer... */
+
+ while (!uart_circ_empty(xmit) && count-- > 0) {
+ if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
+ break;
+
+ wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ s3c24xx_serial_stop_tx(port);
+
+ out:
+ return IRQ_HANDLED;
+}
+
+static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
+{
+ struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+ unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT);
+ unsigned long ufcon = rd_regl(port, S3C2410_UFCON);
+
+ if (ufcon & S3C2410_UFCON_FIFOMODE) {
+ if ((ufstat & info->tx_fifomask) != 0 ||
+ (ufstat & info->tx_fifofull))
+ return 0;
+
+ return 1;
+ }
+
+ return s3c24xx_serial_txempty_nofifo(port);
+}
+
+/* no modem control lines */
+static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
+{
+ unsigned int umstat = rd_regb(port, S3C2410_UMSTAT);
+
+ if (umstat & S3C2410_UMSTAT_CTS)
+ return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+ else
+ return TIOCM_CAR | TIOCM_DSR;
+}
+
+static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ /* todo - possibly remove AFC and do manual CTS */
+}
+
+static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
+{
+ unsigned long flags;
+ unsigned int ucon;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ ucon = rd_regl(port, S3C2410_UCON);
+
+ if (break_state)
+ ucon |= S3C2410_UCON_SBREAK;
+ else
+ ucon &= ~S3C2410_UCON_SBREAK;
+
+ wr_regl(port, S3C2410_UCON, ucon);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void s3c24xx_serial_shutdown(struct uart_port *port)
+{
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
+
+ if (ourport->tx_claimed) {
+ free_irq(TX_IRQ(port), ourport);
+ tx_enabled(port) = 0;
+ ourport->tx_claimed = 0;
+ }
+
+ if (ourport->rx_claimed) {
+ free_irq(RX_IRQ(port), ourport);
+ ourport->rx_claimed = 0;
+ rx_enabled(port) = 0;
+ }
+}
+
+
+static int s3c24xx_serial_startup(struct uart_port *port)
+{
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
+ int ret;
+
+ dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n",
+ port->mapbase, port->membase);
+
+ rx_enabled(port) = 1;
+
+ ret = request_irq(RX_IRQ(port),
+ s3c24xx_serial_rx_chars, 0,
+ s3c24xx_serial_portname(port), ourport);
+
+ if (ret != 0) {
+ printk(KERN_ERR "cannot get irq %d\n", RX_IRQ(port));
+ return ret;
+ }
+
+ ourport->rx_claimed = 1;
+
+ dbg("requesting tx irq...\n");
+
+ tx_enabled(port) = 1;
+
+ ret = request_irq(TX_IRQ(port),
+ s3c24xx_serial_tx_chars, 0,
+ s3c24xx_serial_portname(port), ourport);
+
+ if (ret) {
+ printk(KERN_ERR "cannot get irq %d\n", TX_IRQ(port));
+ goto err;
+ }
+
+ ourport->tx_claimed = 1;
+
+ dbg("s3c24xx_serial_startup ok\n");
+
+ /* the port reset code should have done the correct
+ * register setup for the port controls */
+
+ return ret;
+
+ err:
+ s3c24xx_serial_shutdown(port);
+ return ret;
+}
+
+/* power power management control */
+
+static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
+ unsigned int old)
+{
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
+
+ switch (level) {
+ case 3:
+ if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
+ clk_disable(ourport->baudclk);
+
+ clk_disable(ourport->clk);
+ break;
+
+ case 0:
+ clk_enable(ourport->clk);
+
+ if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
+ clk_enable(ourport->baudclk);
+
+ break;
+ default:
+ printk(KERN_ERR "s3c24xx_serial: unknown pm %d\n", level);
+ }
+}
+
+/* baud rate calculation
+ *
+ * The UARTs on the S3C2410/S3C2440 can take their clocks from a number
+ * of different sources, including the peripheral clock ("pclk") and an
+ * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk")
+ * with a programmable extra divisor.
+ *
+ * The following code goes through the clock sources, and calculates the
+ * baud clocks (and the resultant actual baud rates) and then tries to
+ * pick the closest one and select that.
+ *
+*/
+
+
+#define MAX_CLKS (8)
+
+static struct s3c24xx_uart_clksrc tmp_clksrc = {
+ .name = "pclk",
+ .min_baud = 0,
+ .max_baud = 0,
+ .divisor = 1,
+};
+
+static inline int
+s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
+{
+ struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+
+ return (info->get_clksrc)(port, c);
+}
+
+static inline int
+s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
+{
+ struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+
+ return (info->set_clksrc)(port, c);
+}
+
+struct baud_calc {
+ struct s3c24xx_uart_clksrc *clksrc;
+ unsigned int calc;
+ unsigned int quot;
+ struct clk *src;
+};
+
+static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
+ struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clksrc,
+ unsigned int baud)
+{
+ unsigned long rate;
+
+ calc->src = clk_get(port->dev, clksrc->name);
+ if (calc->src == NULL || IS_ERR(calc->src))
+ return 0;
+
+ rate = clk_get_rate(calc->src);
+ rate /= clksrc->divisor;
+
+ calc->clksrc = clksrc;
+ calc->quot = (rate + (8 * baud)) / (16 * baud);
+ calc->calc = (rate / (calc->quot * 16));
+
+ calc->quot--;
+ return 1;
+}
+
+static unsigned int s3c24xx_serial_getclk(struct uart_port *port,
+ struct s3c24xx_uart_clksrc **clksrc,
+ struct clk **clk,
+ unsigned int baud)
+{
+ struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
+ struct s3c24xx_uart_clksrc *clkp;
+ struct baud_calc res[MAX_CLKS];
+ struct baud_calc *resptr, *best, *sptr;
+ int i;
+
+ clkp = cfg->clocks;
+ best = NULL;
+
+ if (cfg->clocks_size < 2) {
+ if (cfg->clocks_size == 0)
+ clkp = &tmp_clksrc;
+
+ /* check to see if we're sourcing fclk, and if so we're
+ * going to have to update the clock source
+ */
+
+ if (strcmp(clkp->name, "fclk") == 0) {
+ struct s3c24xx_uart_clksrc src;
+
+ s3c24xx_serial_getsource(port, &src);
+
+ /* check that the port already using fclk, and if
+ * not, then re-select fclk
+ */
+
+ if (strcmp(src.name, clkp->name) == 0) {
+ s3c24xx_serial_setsource(port, clkp);
+ s3c24xx_serial_getsource(port, &src);
+ }
+
+ clkp->divisor = src.divisor;
+ }
+
+ s3c24xx_serial_calcbaud(res, port, clkp, baud);
+ best = res;
+ resptr = best + 1;
+ } else {
+ resptr = res;
+
+ for (i = 0; i < cfg->clocks_size; i++, clkp++) {
+ if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud))
+ resptr++;
+ }
+ }
+
+ /* ok, we now need to select the best clock we found */
+
+ if (!best) {
+ unsigned int deviation = (1<<30)|((1<<30)-1);
+ int calc_deviation;
+
+ for (sptr = res; sptr < resptr; sptr++) {
+ calc_deviation = baud - sptr->calc;
+ if (calc_deviation < 0)
+ calc_deviation = -calc_deviation;
+
+ if (calc_deviation < deviation) {
+ best = sptr;
+ deviation = calc_deviation;
+ }
+ }
+ }
+
+ /* store results to pass back */
+
+ *clksrc = best->clksrc;
+ *clk = best->src;
+
+ return best->quot;
+}
+
+static void s3c24xx_serial_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
+ struct s3c24xx_uart_clksrc *clksrc = NULL;
+ struct clk *clk = NULL;
+ unsigned long flags;
+ unsigned int baud, quot;
+ unsigned int ulcon;
+ unsigned int umcon;
+
+ /*
+ * We don't support modem control lines.
+ */
+ termios->c_cflag &= ~(HUPCL | CMSPAR);
+ termios->c_cflag |= CLOCAL;
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+
+ baud = uart_get_baud_rate(port, termios, old, 0, 115200*8);
+
+ if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
+ quot = port->custom_divisor;
+ else
+ quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud);
+
+ /* check to see if we need to change clock source */
+
+ if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
+ s3c24xx_serial_setsource(port, clksrc);
+
+ if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
+ clk_disable(ourport->baudclk);
+ ourport->baudclk = NULL;
+ }
+
+ clk_enable(clk);
+
+ ourport->clksrc = clksrc;
+ ourport->baudclk = clk;
+ }
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ dbg("config: 5bits/char\n");
+ ulcon = S3C2410_LCON_CS5;
+ break;
+ case CS6:
+ dbg("config: 6bits/char\n");
+ ulcon = S3C2410_LCON_CS6;
+ break;
+ case CS7:
+ dbg("config: 7bits/char\n");
+ ulcon = S3C2410_LCON_CS7;
+ break;
+ case CS8:
+ default:
+ dbg("config: 8bits/char\n");
+ ulcon = S3C2410_LCON_CS8;
+ break;
+ }
+
+ /* preserve original lcon IR settings */
+ ulcon |= (cfg->ulcon & S3C2410_LCON_IRM);
+
+ if (termios->c_cflag & CSTOPB)
+ ulcon |= S3C2410_LCON_STOPB;
+
+ umcon = (termios->c_cflag & CRTSCTS) ? S3C2410_UMCOM_AFC : 0;
+
+ if (termios->c_cflag & PARENB) {
+ if (termios->c_cflag & PARODD)
+ ulcon |= S3C2410_LCON_PODD;
+ else
+ ulcon |= S3C2410_LCON_PEVEN;
+ } else {
+ ulcon |= S3C2410_LCON_PNONE;
+ }
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ dbg("setting ulcon to %08x, brddiv to %d\n", ulcon, quot);
+
+ wr_regl(port, S3C2410_ULCON, ulcon);
+ wr_regl(port, S3C2410_UBRDIV, quot);
+ wr_regl(port, S3C2410_UMCON, umcon);
+
+ dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
+ rd_regl(port, S3C2410_ULCON),
+ rd_regl(port, S3C2410_UCON),
+ rd_regl(port, S3C2410_UFCON));
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ /*
+ * Which character status flags are we interested in?
+ */
+ port->read_status_mask = S3C2410_UERSTAT_OVERRUN;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= S3C2410_UERSTAT_FRAME | S3C2410_UERSTAT_PARITY;
+
+ /*
+ * Which character status flags should we ignore?
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN;
+ if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= S3C2410_UERSTAT_FRAME;
+
+ /*
+ * Ignore all characters if CREAD is not set.
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->ignore_status_mask |= RXSTAT_DUMMY_READ;
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *s3c24xx_serial_type(struct uart_port *port)
+{
+ switch (port->type) {
+ case PORT_S3C2410:
+ return "S3C2410";
+ case PORT_S3C2440:
+ return "S3C2440";
+ case PORT_S3C2412:
+ return "S3C2412";
+ default:
+ return NULL;
+ }
+}
+
+#define MAP_SIZE (0x100)
+
+static void s3c24xx_serial_release_port(struct uart_port *port)
+{
+ release_mem_region(port->mapbase, MAP_SIZE);
+}
+
+static int s3c24xx_serial_request_port(struct uart_port *port)
+{
+ const char *name = s3c24xx_serial_portname(port);
+ return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY;
+}
+
+static void s3c24xx_serial_config_port(struct uart_port *port, int flags)
+{
+ struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+
+ if (flags & UART_CONFIG_TYPE &&
+ s3c24xx_serial_request_port(port) == 0)
+ port->type = info->type;
+}
+
+/*
+ * verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int
+s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+
+ if (ser->type != PORT_UNKNOWN && ser->type != info->type)
+ return -EINVAL;
+
+ return 0;
+}
+
+
+#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
+
+static struct console s3c24xx_serial_console;
+
+#define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console
+#else
+#define S3C24XX_SERIAL_CONSOLE NULL
+#endif
+
+static struct uart_ops s3c24xx_serial_ops = {
+ .pm = s3c24xx_serial_pm,
+ .tx_empty = s3c24xx_serial_tx_empty,
+ .get_mctrl = s3c24xx_serial_get_mctrl,
+ .set_mctrl = s3c24xx_serial_set_mctrl,
+ .stop_tx = s3c24xx_serial_stop_tx,
+ .start_tx = s3c24xx_serial_start_tx,
+ .stop_rx = s3c24xx_serial_stop_rx,
+ .enable_ms = s3c24xx_serial_enable_ms,
+ .break_ctl = s3c24xx_serial_break_ctl,
+ .startup = s3c24xx_serial_startup,
+ .shutdown = s3c24xx_serial_shutdown,
+ .set_termios = s3c24xx_serial_set_termios,
+ .type = s3c24xx_serial_type,
+ .release_port = s3c24xx_serial_release_port,
+ .request_port = s3c24xx_serial_request_port,
+ .config_port = s3c24xx_serial_config_port,
+ .verify_port = s3c24xx_serial_verify_port,
+};
+
+
+static struct uart_driver s3c24xx_uart_drv = {
+ .owner = THIS_MODULE,
+ .dev_name = "s3c2410_serial",
+ .nr = 3,
+ .cons = S3C24XX_SERIAL_CONSOLE,
+ .driver_name = S3C24XX_SERIAL_NAME,
+ .major = S3C24XX_SERIAL_MAJOR,
+ .minor = S3C24XX_SERIAL_MINOR,
+};
+
+static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
+ [0] = {
+ .port = {
+ .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock),
+ .iotype = UPIO_MEM,
+ .irq = IRQ_S3CUART_RX0,
+ .uartclk = 0,
+ .fifosize = 16,
+ .ops = &s3c24xx_serial_ops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 0,
+ }
+ },
+ [1] = {
+ .port = {
+ .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[1].port.lock),
+ .iotype = UPIO_MEM,
+ .irq = IRQ_S3CUART_RX1,
+ .uartclk = 0,
+ .fifosize = 16,
+ .ops = &s3c24xx_serial_ops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 1,
+ }
+ },
+#if NR_PORTS > 2
+
+ [2] = {
+ .port = {
+ .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[2].port.lock),
+ .iotype = UPIO_MEM,
+ .irq = IRQ_S3CUART_RX2,
+ .uartclk = 0,
+ .fifosize = 16,
+ .ops = &s3c24xx_serial_ops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 2,
+ }
+ }
+#endif
+};
+
+/* s3c24xx_serial_resetport
+ *
+ * wrapper to call the specific reset for this port (reset the fifos
+ * and the settings)
+*/
+
+static inline int s3c24xx_serial_resetport(struct uart_port *port,
+ struct s3c2410_uartcfg *cfg)
+{
+ struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+
+ return (info->reset_port)(port, cfg);
+}
+
+/* s3c24xx_serial_init_port
+ *
+ * initialise a single serial port from the platform device given
+ */
+
+static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
+ struct s3c24xx_uart_info *info,
+ struct platform_device *platdev)
+{
+ struct uart_port *port = &ourport->port;
+ struct s3c2410_uartcfg *cfg;
+ struct resource *res;
+ int ret;
+
+ dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev);
+
+ if (platdev == NULL)
+ return -ENODEV;
+
+ cfg = s3c24xx_dev_to_cfg(&platdev->dev);
+
+ if (port->mapbase != 0)
+ return 0;
+
+ if (cfg->hwport > 3)
+ return -EINVAL;
+
+ /* setup info for port */
+ port->dev = &platdev->dev;
+ ourport->info = info;
+
+ /* copy the info in from provided structure */
+ ourport->port.fifosize = info->fifosize;
+
+ dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport);
+
+ port->uartclk = 1;
+
+ if (cfg->uart_flags & UPF_CONS_FLOW) {
+ dbg("s3c24xx_serial_init_port: enabling flow control\n");
+ port->flags |= UPF_CONS_FLOW;
+ }
+
+ /* sort our the physical and virtual addresses for each UART */
+
+ res = platform_get_resource(platdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ printk(KERN_ERR "failed to find memory resource for uart\n");
+ return -EINVAL;
+ }
+
+ dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
+
+ port->mapbase = res->start;
+ port->membase = S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART);
+ ret = platform_get_irq(platdev, 0);
+ if (ret < 0)
+ port->irq = 0;
+ else
+ port->irq = ret;
+
+ ourport->clk = clk_get(&platdev->dev, "uart");
+
+ dbg("port: map=%08x, mem=%08x, irq=%d, clock=%ld\n",
+ port->mapbase, port->membase, port->irq, port->uartclk);
+
+ /* reset the fifos (and setup the uart) */
+ s3c24xx_serial_resetport(port, cfg);
+ return 0;
+}
+
+static ssize_t s3c24xx_serial_show_clksrc(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct uart_port *port = s3c24xx_dev_to_port(dev);
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
+
+ return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->clksrc->name);
+}
+
+static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL);
+
+/* Device driver serial port probe */
+
+static int probe_index;
+
+int s3c24xx_serial_probe(struct platform_device *dev,
+ struct s3c24xx_uart_info *info)
+{
+ struct s3c24xx_uart_port *ourport;
+ int ret;
+
+ dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index);
+
+ ourport = &s3c24xx_serial_ports[probe_index];
+ probe_index++;
+
+ dbg("%s: initialising port %p...\n", __func__, ourport);
+
+ ret = s3c24xx_serial_init_port(ourport, info, dev);
+ if (ret < 0)
+ goto probe_err;
+
+ dbg("%s: adding port\n", __func__);
+ uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
+ platform_set_drvdata(dev, &ourport->port);
+
+ ret = device_create_file(&dev->dev, &dev_attr_clock_source);
+ if (ret < 0)
+ printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__);
+
+ return 0;
+
+ probe_err:
+ return ret;
+}
+
+EXPORT_SYMBOL_GPL(s3c24xx_serial_probe);
+
+int s3c24xx_serial_remove(struct platform_device *dev)
+{
+ struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
+
+ if (port) {
+ device_remove_file(&dev->dev, &dev_attr_clock_source);
+ uart_remove_one_port(&s3c24xx_uart_drv, port);
+ }
+
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(s3c24xx_serial_remove);
+
+/* UART power management code */
+
+#ifdef CONFIG_PM
+
+static int s3c24xx_serial_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
+
+ if (port)
+ uart_suspend_port(&s3c24xx_uart_drv, port);
+
+ return 0;
+}
+
+static int s3c24xx_serial_resume(struct platform_device *dev)
+{
+ struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
+
+ if (port) {
+ clk_enable(ourport->clk);
+ s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
+ clk_disable(ourport->clk);
+
+ uart_resume_port(&s3c24xx_uart_drv, port);
+ }
+
+ return 0;
+}
+#endif
+
+int s3c24xx_serial_init(struct platform_driver *drv,
+ struct s3c24xx_uart_info *info)
+{
+ dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
+
+#ifdef CONFIG_PM
+ drv->suspend = s3c24xx_serial_suspend;
+ drv->resume = s3c24xx_serial_resume;
+#endif
+
+ return platform_driver_register(drv);
+}
+
+EXPORT_SYMBOL_GPL(s3c24xx_serial_init);
+
+/* module initialisation code */
+
+static int __init s3c24xx_serial_modinit(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&s3c24xx_uart_drv);
+ if (ret < 0) {
+ printk(KERN_ERR "failed to register UART driver\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static void __exit s3c24xx_serial_modexit(void)
+{
+ uart_unregister_driver(&s3c24xx_uart_drv);
+}
+
+module_init(s3c24xx_serial_modinit);
+module_exit(s3c24xx_serial_modexit);
+
+/* Console code */
+
+#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
+
+static struct uart_port *cons_uart;
+
+static int
+s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
+{
+ struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+ unsigned long ufstat, utrstat;
+
+ if (ufcon & S3C2410_UFCON_FIFOMODE) {
+ /* fifo mode - check ammount of data in fifo registers... */
+
+ ufstat = rd_regl(port, S3C2410_UFSTAT);
+ return (ufstat & info->tx_fifofull) ? 0 : 1;
+ }
+
+ /* in non-fifo mode, we go and use the tx buffer empty */
+
+ utrstat = rd_regl(port, S3C2410_UTRSTAT);
+ return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0;
+}
+
+static void
+s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
+{
+ unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
+ while (!s3c24xx_serial_console_txrdy(port, ufcon))
+ barrier();
+ wr_regb(cons_uart, S3C2410_UTXH, ch);
+}
+
+static void
+s3c24xx_serial_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar);
+}
+
+static void __init
+s3c24xx_serial_get_options(struct uart_port *port, int *baud,
+ int *parity, int *bits)
+{
+ struct s3c24xx_uart_clksrc clksrc;
+ struct clk *clk;
+ unsigned int ulcon;
+ unsigned int ucon;
+ unsigned int ubrdiv;
+ unsigned long rate;
+
+ ulcon = rd_regl(port, S3C2410_ULCON);
+ ucon = rd_regl(port, S3C2410_UCON);
+ ubrdiv = rd_regl(port, S3C2410_UBRDIV);
+
+ dbg("s3c24xx_serial_get_options: port=%p\n"
+ "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n",
+ port, ulcon, ucon, ubrdiv);
+
+ if ((ucon & 0xf) != 0) {
+ /* consider the serial port configured if the tx/rx mode set */
+
+ switch (ulcon & S3C2410_LCON_CSMASK) {
+ case S3C2410_LCON_CS5:
+ *bits = 5;
+ break;
+ case S3C2410_LCON_CS6:
+ *bits = 6;
+ break;
+ case S3C2410_LCON_CS7:
+ *bits = 7;
+ break;
+ default:
+ case S3C2410_LCON_CS8:
+ *bits = 8;
+ break;
+ }
+
+ switch (ulcon & S3C2410_LCON_PMASK) {
+ case S3C2410_LCON_PEVEN:
+ *parity = 'e';
+ break;
+
+ case S3C2410_LCON_PODD:
+ *parity = 'o';
+ break;
+
+ case S3C2410_LCON_PNONE:
+ default:
+ *parity = 'n';
+ }
+
+ /* now calculate the baud rate */
+
+ s3c24xx_serial_getsource(port, &clksrc);
+
+ clk = clk_get(port->dev, clksrc.name);
+ if (!IS_ERR(clk) && clk != NULL)
+ rate = clk_get_rate(clk) / clksrc.divisor;
+ else
+ rate = 1;
+
+
+ *baud = rate / (16 * (ubrdiv + 1));
+ dbg("calculated baud %d\n", *baud);
+ }
+
+}
+
+/* s3c24xx_serial_init_ports
+ *
+ * initialise the serial ports from the machine provided initialisation
+ * data.
+*/
+
+static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
+{
+ struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports;
+ struct platform_device **platdev_ptr;
+ int i;
+
+ dbg("s3c24xx_serial_init_ports: initialising ports...\n");
+
+ platdev_ptr = s3c24xx_uart_devs;
+
+ for (i = 0; i < NR_PORTS; i++, ptr++, platdev_ptr++) {
+ s3c24xx_serial_init_port(ptr, info, *platdev_ptr);
+ }
+
+ return 0;
+}
+
+static int __init
+s3c24xx_serial_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ dbg("s3c24xx_serial_console_setup: co=%p (%d), %s\n",
+ co, co->index, options);
+
+ /* is this a valid port */
+
+ if (co->index == -1 || co->index >= NR_PORTS)
+ co->index = 0;
+
+ port = &s3c24xx_serial_ports[co->index].port;
+
+ /* is the port configured? */
+
+ if (port->mapbase == 0x0) {
+ co->index = 0;
+ port = &s3c24xx_serial_ports[co->index].port;
+ }
+
+ cons_uart = port;
+
+ dbg("s3c24xx_serial_console_setup: port=%p (%d)\n", port, co->index);
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ s3c24xx_serial_get_options(port, &baud, &parity, &bits);
+
+ dbg("s3c24xx_serial_console_setup: baud %d\n", baud);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+/* s3c24xx_serial_initconsole
+ *
+ * initialise the console from one of the uart drivers
+*/
+
+static struct console s3c24xx_serial_console = {
+ .name = S3C24XX_SERIAL_NAME,
+ .device = uart_console_device,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .write = s3c24xx_serial_console_write,
+ .setup = s3c24xx_serial_console_setup
+};
+
+int s3c24xx_serial_initconsole(struct platform_driver *drv,
+ struct s3c24xx_uart_info *info)
+
+{
+ struct platform_device *dev = s3c24xx_uart_devs[0];
+
+ dbg("s3c24xx_serial_initconsole\n");
+
+ /* select driver based on the cpu */
+
+ if (dev == NULL) {
+ printk(KERN_ERR "s3c24xx: no devices for console init\n");
+ return 0;
+ }
+
+ if (strcmp(dev->name, drv->driver.name) != 0)
+ return 0;
+
+ s3c24xx_serial_console.data = &s3c24xx_uart_drv;
+ s3c24xx_serial_init_ports(info);
+
+ register_console(&s3c24xx_serial_console);
+ return 0;
+}
+
+#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
+
+MODULE_DESCRIPTION("Samsung SoC Serial port driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
new file mode 100644
index 000000000000..5c92ebbe7d9e
--- /dev/null
+++ b/drivers/serial/samsung.h
@@ -0,0 +1,102 @@
+/* linux/drivers/serial/samsung.h
+ *
+ * Driver for Samsung SoC onboard UARTs.
+ *
+ * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct s3c24xx_uart_info {
+ char *name;
+ unsigned int type;
+ unsigned int fifosize;
+ unsigned long rx_fifomask;
+ unsigned long rx_fifoshift;
+ unsigned long rx_fifofull;
+ unsigned long tx_fifomask;
+ unsigned long tx_fifoshift;
+ unsigned long tx_fifofull;
+
+ /* clock source control */
+
+ int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
+ int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
+
+ /* uart controls */
+ int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *);
+};
+
+struct s3c24xx_uart_port {
+ unsigned char rx_claimed;
+ unsigned char tx_claimed;
+
+ struct s3c24xx_uart_info *info;
+ struct s3c24xx_uart_clksrc *clksrc;
+ struct clk *clk;
+ struct clk *baudclk;
+ struct uart_port port;
+};
+
+/* conversion functions */
+
+#define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev)
+#define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data)
+
+/* register access controls */
+
+#define portaddr(port, reg) ((port)->membase + (reg))
+
+#define rd_regb(port, reg) (__raw_readb(portaddr(port, reg)))
+#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg)))
+
+#define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg))
+#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg))
+
+extern int s3c24xx_serial_probe(struct platform_device *dev,
+ struct s3c24xx_uart_info *uart);
+
+extern int s3c24xx_serial_remove(struct platform_device *dev);
+
+extern int s3c24xx_serial_initconsole(struct platform_driver *drv,
+ struct s3c24xx_uart_info *uart);
+
+extern int s3c24xx_serial_init(struct platform_driver *drv,
+ struct s3c24xx_uart_info *info);
+
+#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
+
+#define s3c24xx_console_init(__drv, __inf) \
+static int __init s3c_serial_console_init(void) \
+{ \
+ return s3c24xx_serial_initconsole(__drv, __inf); \
+} \
+ \
+console_initcall(s3c_serial_console_init)
+
+#else
+#define s3c24xx_console_init(drv, inf) extern void no_console(void)
+#endif
+
+#ifdef CONFIG_SERIAL_SAMSUNG_DEBUG
+
+extern void printascii(const char *);
+
+static void dbg(const char *fmt, ...)
+{
+ va_list va;
+ char buff[256];
+
+ va_start(va, fmt);
+ vsprintf(buff, fmt, va);
+ va_end(va);
+
+ printascii(buff);
+}
+
+#else
+#define dbg(x...) do { } while (0)
+#endif
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index c730d05bfeb6..54ac7bea5f8c 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -29,6 +29,7 @@
#include <linux/spi/spi.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
+#include <linux/clk.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -250,6 +251,8 @@ struct driver_data {
int tx_dma_needs_unmap;
size_t tx_map_len;
u32 dummy_dma_buf ____cacheline_aligned;
+
+ struct clk *clk;
};
/* Runtime state */
@@ -855,15 +858,15 @@ static irqreturn_t spi_int(int irq, void *dev_id)
return drv_data->transfer_handler(drv_data);
}
-static inline u32 spi_speed_hz(u32 data_rate)
+static inline u32 spi_speed_hz(struct driver_data *drv_data, u32 data_rate)
{
- return imx_get_perclk2() / (4 << ((data_rate) >> 13));
+ return clk_get_rate(drv_data->clk) / (4 << ((data_rate) >> 13));
}
-static u32 spi_data_rate(u32 speed_hz)
+static u32 spi_data_rate(struct driver_data *drv_data, u32 speed_hz)
{
u32 div;
- u32 quantized_hz = imx_get_perclk2() >> 2;
+ u32 quantized_hz = clk_get_rate(drv_data->clk) >> 2;
for (div = SPI_PERCLK2_DIV_MIN;
div <= SPI_PERCLK2_DIV_MAX;
@@ -947,7 +950,7 @@ static void pump_transfers(unsigned long data)
tmp = transfer->speed_hz;
if (tmp == 0)
tmp = chip->max_speed_hz;
- tmp = spi_data_rate(tmp);
+ tmp = spi_data_rate(drv_data, tmp);
u32_EDIT(control, SPI_CONTROL_DATARATE, tmp);
writel(control, regs + SPI_CONTROL);
@@ -1109,7 +1112,7 @@ static int transfer(struct spi_device *spi, struct spi_message *msg)
msg->actual_length = 0;
/* Per transfer setup check */
- min_speed_hz = spi_speed_hz(SPI_CONTROL_DATARATE_MIN);
+ min_speed_hz = spi_speed_hz(drv_data, SPI_CONTROL_DATARATE_MIN);
max_speed_hz = spi->max_speed_hz;
list_for_each_entry(trans, &msg->transfers, transfer_list) {
tmp = trans->bits_per_word;
@@ -1176,6 +1179,7 @@ msg_rejected:
applied and notified to the calling driver. */
static int setup(struct spi_device *spi)
{
+ struct driver_data *drv_data = spi_master_get_devdata(spi->master);
struct spi_imx_chip *chip_info;
struct chip_data *chip;
int first_setup = 0;
@@ -1304,14 +1308,14 @@ static int setup(struct spi_device *spi)
chip->n_bytes = (tmp <= 8) ? 1 : 2;
/* SPI datarate */
- tmp = spi_data_rate(spi->max_speed_hz);
+ tmp = spi_data_rate(drv_data, spi->max_speed_hz);
if (tmp == SPI_CONTROL_DATARATE_BAD) {
status = -EINVAL;
dev_err(&spi->dev,
"setup - "
"HW min speed (%d Hz) exceeds required "
"max speed (%d Hz)\n",
- spi_speed_hz(SPI_CONTROL_DATARATE_MIN),
+ spi_speed_hz(drv_data, SPI_CONTROL_DATARATE_MIN),
spi->max_speed_hz);
if (first_setup)
goto err_first_setup;
@@ -1321,7 +1325,7 @@ static int setup(struct spi_device *spi)
} else {
u32_EDIT(chip->control, SPI_CONTROL_DATARATE, tmp);
/* Actual rounded max_speed_hz */
- tmp = spi_speed_hz(tmp);
+ tmp = spi_speed_hz(drv_data, tmp);
spi->max_speed_hz = tmp;
chip->max_speed_hz = tmp;
}
@@ -1352,7 +1356,7 @@ static int setup(struct spi_device *spi)
chip->period & SPI_PERIOD_WAIT,
spi->mode,
spi->bits_per_word,
- spi_speed_hz(SPI_CONTROL_DATARATE_MIN),
+ spi_speed_hz(drv_data, SPI_CONTROL_DATARATE_MIN),
spi->max_speed_hz);
return status;
@@ -1465,6 +1469,14 @@ static int __init spi_imx_probe(struct platform_device *pdev)
goto err_no_pdata;
}
+ drv_data->clk = clk_get(&pdev->dev, "perclk2");
+ if (IS_ERR(drv_data->clk)) {
+ dev_err(&pdev->dev, "probe - cannot get get\n");
+ status = PTR_ERR(drv_data->clk);
+ goto err_no_clk;
+ }
+ clk_enable(drv_data->clk);
+
/* Allocate master with space for drv_data */
master = spi_alloc_master(dev, sizeof(struct driver_data));
if (!master) {
@@ -1526,24 +1538,24 @@ static int __init spi_imx_probe(struct platform_device *pdev)
drv_data->rx_channel = -1;
if (platform_info->enable_dma) {
/* Get rx DMA channel */
- status = imx_dma_request_by_prio(&drv_data->rx_channel,
- "spi_imx_rx", DMA_PRIO_HIGH);
- if (status < 0) {
+ drv_data->rx_channel = imx_dma_request_by_prio("spi_imx_rx",
+ DMA_PRIO_HIGH);
+ if (drv_data->rx_channel < 0) {
dev_err(dev,
"probe - problem (%d) requesting rx channel\n",
- status);
+ drv_data->rx_channel);
goto err_no_rxdma;
} else
imx_dma_setup_handlers(drv_data->rx_channel, NULL,
dma_err_handler, drv_data);
/* Get tx DMA channel */
- status = imx_dma_request_by_prio(&drv_data->tx_channel,
- "spi_imx_tx", DMA_PRIO_MEDIUM);
- if (status < 0) {
+ drv_data->tx_channel = imx_dma_request_by_prio("spi_imx_tx",
+ DMA_PRIO_MEDIUM);
+ if (drv_data->tx_channel < 0) {
dev_err(dev,
"probe - problem (%d) requesting tx channel\n",
- status);
+ drv_data->tx_channel);
imx_dma_free(drv_data->rx_channel);
goto err_no_txdma;
} else
@@ -1623,6 +1635,9 @@ err_no_iores:
spi_master_put(master);
err_no_pdata:
+ clk_disable(drv_data->clk);
+ clk_put(drv_data->clk);
+err_no_clk:
err_no_mem:
return status;
}
@@ -1662,6 +1677,9 @@ static int __exit spi_imx_remove(struct platform_device *pdev)
if (irq >= 0)
free_irq(irq, drv_data);
+ clk_disable(drv_data->clk);
+ clk_put(drv_data->clk);
+
/* Release map resources */
iounmap(drv_data->regs);
release_resource(drv_data->ioarea);
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 6e784d2db423..d6bab0d5f453 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -118,10 +118,10 @@ config USB_AMD5536UDC
config USB_GADGET_ATMEL_USBA
boolean "Atmel USBA"
select USB_GADGET_DUALSPEED
- depends on AVR32 || ARCH_AT91CAP9
+ depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL
help
USBA is the integrated high-speed USB Device controller on
- the AT32AP700x and AT91CAP9 processors from Atmel.
+ the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
config USB_ATMEL_USBA
tristate
@@ -172,7 +172,7 @@ config USB_NET2280
default USB_GADGET
select USB_GADGET_SELECTED
-config USB_GADGET_PXA2XX
+config USB_GADGET_PXA25X
boolean "PXA 25x or IXP 4xx"
depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
help
@@ -184,19 +184,19 @@ config USB_GADGET_PXA2XX
zero (for control transfers).
Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "pxa2xx_udc" and force all
+ dynamically linked module called "pxa25x_udc" and force all
gadget drivers to also be dynamically linked.
-config USB_PXA2XX
+config USB_PXA25X
tristate
- depends on USB_GADGET_PXA2XX
+ depends on USB_GADGET_PXA25X
default USB_GADGET
select USB_GADGET_SELECTED
# if there's only one gadget driver, using only two bulk endpoints,
# don't waste memory for the other endpoints
-config USB_PXA2XX_SMALL
- depends on USB_GADGET_PXA2XX
+config USB_PXA25X_SMALL
+ depends on USB_GADGET_PXA25X
bool
default n if USB_ETH_RNDIS
default y if USB_ZERO
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 12357255d740..e258afd25faf 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -8,7 +8,7 @@ endif
obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o
obj-$(CONFIG_USB_NET2280) += net2280.o
obj-$(CONFIG_USB_AMD5536UDC) += amd5536udc.o
-obj-$(CONFIG_USB_PXA2XX) += pxa2xx_udc.o
+obj-$(CONFIG_USB_PXA25X) += pxa25x_udc.o
obj-$(CONFIG_USB_PXA27X) += pxa27x_udc.o
obj-$(CONFIG_USB_GOKU) += goku_udc.o
obj-$(CONFIG_USB_OMAP) += omap_udc.o
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 274c60a970cd..b6b2a0a5ba37 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -888,7 +888,7 @@ static void pullup(struct at91_udc *udc, int is_on)
at91_udp_write(udc, AT91_UDP_TXVC, 0);
if (cpu_is_at91rm9200())
gpio_set_value(udc->board.pullup_pin, active);
- else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
+ else if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
txvc |= AT91_UDP_TXVC_PUON;
@@ -906,7 +906,7 @@ static void pullup(struct at91_udc *udc, int is_on)
at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
if (cpu_is_at91rm9200())
gpio_set_value(udc->board.pullup_pin, !active);
- else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
+ else if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
txvc &= ~AT91_UDP_TXVC_PUON;
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 8d61ea67a817..4ce3950b997f 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -262,7 +262,7 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
/* For CDC-incapable hardware, choose the simple cdc subset.
* Anything that talks bulk (without notable bugs) can do this.
*/
-#ifdef CONFIG_USB_GADGET_PXA2XX
+#ifdef CONFIG_USB_GADGET_PXA25X
#define DEV_CONFIG_SUBSET
#endif
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index f7f159c1002b..ca5149ea7312 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -29,8 +29,8 @@
#define gadget_is_dummy(g) 0
#endif
-#ifdef CONFIG_USB_GADGET_PXA2XX
-#define gadget_is_pxa(g) !strcmp("pxa2xx_udc", (g)->name)
+#ifdef CONFIG_USB_GADGET_PXA25X
+#define gadget_is_pxa(g) !strcmp("pxa25x_udc", (g)->name)
#else
#define gadget_is_pxa(g) 0
#endif
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 69b0a2754f2a..f132a9219e11 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -1501,7 +1501,7 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
}
break;
-#ifndef CONFIG_USB_GADGET_PXA2XX
+#ifndef CONFIG_USB_GADGET_PXA25X
/* PXA automagically handles this request too */
case USB_REQ_GET_CONFIGURATION:
if (ctrl->bRequestType != 0x80)
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 881d74c3d964..03a7f49d207d 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -135,13 +135,17 @@ static void use_ep(struct omap_ep *ep, u16 select)
if (ep->bEndpointAddress & USB_DIR_IN)
num |= UDC_EP_DIR;
- UDC_EP_NUM_REG = num | select;
+ omap_writew(num | select, UDC_EP_NUM);
/* when select, MUST deselect later !! */
}
static inline void deselect_ep(void)
{
- UDC_EP_NUM_REG &= ~UDC_EP_SEL;
+ u16 w;
+
+ w = omap_readw(UDC_EP_NUM);
+ w &= ~UDC_EP_SEL;
+ omap_writew(w, UDC_EP_NUM);
/* 6 wait states before TX will happen */
}
@@ -216,7 +220,7 @@ static int omap_ep_enable(struct usb_ep *_ep,
ep->has_dma = 0;
ep->lch = -1;
use_ep(ep, UDC_EP_SEL);
- UDC_CTRL_REG = udc->clr_halt;
+ omap_writew(udc->clr_halt, UDC_CTRL);
ep->ackwait = 0;
deselect_ep();
@@ -232,7 +236,7 @@ static int omap_ep_enable(struct usb_ep *_ep,
if (desc->bmAttributes != USB_ENDPOINT_XFER_ISOC
&& !ep->has_dma
&& !(ep->bEndpointAddress & USB_DIR_IN)) {
- UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
ep->ackwait = 1 + ep->double_buf;
}
@@ -259,7 +263,7 @@ static int omap_ep_disable(struct usb_ep *_ep)
nuke (ep, -ESHUTDOWN);
ep->ep.maxpacket = ep->maxpacket;
ep->has_dma = 0;
- UDC_CTRL_REG = UDC_SET_HALT;
+ omap_writew(UDC_SET_HALT, UDC_CTRL);
list_del_init(&ep->iso);
del_timer(&ep->timer);
@@ -360,13 +364,13 @@ write_packet(u8 *buf, struct omap_req *req, unsigned max)
if (likely((((int)buf) & 1) == 0)) {
wp = (u16 *)buf;
while (max >= 2) {
- UDC_DATA_REG = *wp++;
+ omap_writew(*wp++, UDC_DATA);
max -= 2;
}
buf = (u8 *)wp;
}
while (max--)
- *(volatile u8 *)&UDC_DATA_REG = *buf++;
+ omap_writeb(*buf++, UDC_DATA);
return len;
}
@@ -385,13 +389,13 @@ static int write_fifo(struct omap_ep *ep, struct omap_req *req)
prefetch(buf);
/* PIO-IN isn't double buffered except for iso */
- ep_stat = UDC_STAT_FLG_REG;
+ ep_stat = omap_readw(UDC_STAT_FLG);
if (ep_stat & UDC_FIFO_UNWRITABLE)
return 0;
count = ep->ep.maxpacket;
count = write_packet(buf, req, count);
- UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
ep->ackwait = 1;
/* last packet is often short (sometimes a zlp) */
@@ -425,13 +429,13 @@ read_packet(u8 *buf, struct omap_req *req, unsigned avail)
if (likely((((int)buf) & 1) == 0)) {
wp = (u16 *)buf;
while (avail >= 2) {
- *wp++ = UDC_DATA_REG;
+ *wp++ = omap_readw(UDC_DATA);
avail -= 2;
}
buf = (u8 *)wp;
}
while (avail--)
- *buf++ = *(volatile u8 *)&UDC_DATA_REG;
+ *buf++ = omap_readb(UDC_DATA);
return len;
}
@@ -446,7 +450,7 @@ static int read_fifo(struct omap_ep *ep, struct omap_req *req)
prefetchw(buf);
for (;;) {
- u16 ep_stat = UDC_STAT_FLG_REG;
+ u16 ep_stat = omap_readw(UDC_STAT_FLG);
is_last = 0;
if (ep_stat & FIFO_EMPTY) {
@@ -460,7 +464,7 @@ static int read_fifo(struct omap_ep *ep, struct omap_req *req)
if (ep_stat & UDC_FIFO_FULL)
avail = ep->ep.maxpacket;
else {
- avail = UDC_RXFSTAT_REG;
+ avail = omap_readw(UDC_RXFSTAT);
ep->fnf = ep->double_buf;
}
count = read_packet(buf, req, avail);
@@ -473,7 +477,7 @@ static int read_fifo(struct omap_ep *ep, struct omap_req *req)
req->req.status = -EOVERFLOW;
avail -= count;
while (avail--)
- (void) *(volatile u8 *)&UDC_DATA_REG;
+ omap_readw(UDC_DATA);
}
} else if (req->req.length == req->req.actual)
is_last = 1;
@@ -491,32 +495,6 @@ static int read_fifo(struct omap_ep *ep, struct omap_req *req)
/*-------------------------------------------------------------------------*/
-static inline dma_addr_t dma_csac(unsigned lch)
-{
- dma_addr_t csac;
-
- /* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
- * read before the DMA controller finished disabling the channel.
- */
- csac = OMAP_DMA_CSAC_REG(lch);
- if (csac == 0)
- csac = OMAP_DMA_CSAC_REG(lch);
- return csac;
-}
-
-static inline dma_addr_t dma_cdac(unsigned lch)
-{
- dma_addr_t cdac;
-
- /* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
- * read before the DMA controller finished disabling the channel.
- */
- cdac = OMAP_DMA_CDAC_REG(lch);
- if (cdac == 0)
- cdac = OMAP_DMA_CDAC_REG(lch);
- return cdac;
-}
-
static u16 dma_src_len(struct omap_ep *ep, dma_addr_t start)
{
dma_addr_t end;
@@ -527,7 +505,7 @@ static u16 dma_src_len(struct omap_ep *ep, dma_addr_t start)
if (cpu_is_omap15xx())
return 0;
- end = dma_csac(ep->lch);
+ end = omap_get_dma_src_pos(ep->lch);
if (end == ep->dma_counter)
return 0;
@@ -537,15 +515,11 @@ static u16 dma_src_len(struct omap_ep *ep, dma_addr_t start)
return end - start;
}
-#define DMA_DEST_LAST(x) (cpu_is_omap15xx() \
- ? OMAP_DMA_CSAC_REG(x) /* really: CPC */ \
- : dma_cdac(x))
-
static u16 dma_dest_len(struct omap_ep *ep, dma_addr_t start)
{
dma_addr_t end;
- end = DMA_DEST_LAST(ep->lch);
+ end = omap_get_dma_dst_pos(ep->lch);
if (end == ep->dma_counter)
return 0;
@@ -565,7 +539,7 @@ static u16 dma_dest_len(struct omap_ep *ep, dma_addr_t start)
static void next_in_dma(struct omap_ep *ep, struct omap_req *req)
{
- u16 txdma_ctrl;
+ u16 txdma_ctrl, w;
unsigned length = req->req.length - req->req.actual;
const int sync_mode = cpu_is_omap15xx()
? OMAP_DMA_SYNC_FRAME
@@ -596,14 +570,18 @@ static void next_in_dma(struct omap_ep *ep, struct omap_req *req)
0, 0);
omap_start_dma(ep->lch);
- ep->dma_counter = dma_csac(ep->lch);
- UDC_DMA_IRQ_EN_REG |= UDC_TX_DONE_IE(ep->dma_channel);
- UDC_TXDMA_REG(ep->dma_channel) = UDC_TXN_START | txdma_ctrl;
+ ep->dma_counter = omap_get_dma_src_pos(ep->lch);
+ w = omap_readw(UDC_DMA_IRQ_EN);
+ w |= UDC_TX_DONE_IE(ep->dma_channel);
+ omap_writew(w, UDC_DMA_IRQ_EN);
+ omap_writew(UDC_TXN_START | txdma_ctrl, UDC_TXDMA(ep->dma_channel));
req->dma_bytes = length;
}
static void finish_in_dma(struct omap_ep *ep, struct omap_req *req, int status)
{
+ u16 w;
+
if (status == 0) {
req->req.actual += req->dma_bytes;
@@ -620,7 +598,9 @@ static void finish_in_dma(struct omap_ep *ep, struct omap_req *req, int status)
/* tx completion */
omap_stop_dma(ep->lch);
- UDC_DMA_IRQ_EN_REG &= ~UDC_TX_DONE_IE(ep->dma_channel);
+ w = omap_readw(UDC_DMA_IRQ_EN);
+ w &= ~UDC_TX_DONE_IE(ep->dma_channel);
+ omap_writew(w, UDC_DMA_IRQ_EN);
done(ep, req, status);
}
@@ -628,6 +608,7 @@ static void next_out_dma(struct omap_ep *ep, struct omap_req *req)
{
unsigned packets = req->req.length - req->req.actual;
int dma_trigger = 0;
+ u16 w;
if (cpu_is_omap24xx())
dma_trigger = OMAP24XX_DMA(USB_W2FC_RX0, ep->dma_channel);
@@ -654,12 +635,14 @@ static void next_out_dma(struct omap_ep *ep, struct omap_req *req)
omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_EMIFF,
OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual,
0, 0);
- ep->dma_counter = DMA_DEST_LAST(ep->lch);
+ ep->dma_counter = omap_get_dma_dst_pos(ep->lch);
- UDC_RXDMA_REG(ep->dma_channel) = UDC_RXN_STOP | (packets - 1);
- UDC_DMA_IRQ_EN_REG |= UDC_RX_EOT_IE(ep->dma_channel);
- UDC_EP_NUM_REG = (ep->bEndpointAddress & 0xf);
- UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ omap_writew(UDC_RXN_STOP | (packets - 1), UDC_RXDMA(ep->dma_channel));
+ w = omap_readw(UDC_DMA_IRQ_EN);
+ w |= UDC_RX_EOT_IE(ep->dma_channel);
+ omap_writew(w, UDC_DMA_IRQ_EN);
+ omap_writew(ep->bEndpointAddress & 0xf, UDC_EP_NUM);
+ omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
omap_start_dma(ep->lch);
}
@@ -667,7 +650,7 @@ static void next_out_dma(struct omap_ep *ep, struct omap_req *req)
static void
finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status, int one)
{
- u16 count;
+ u16 count, w;
if (status == 0)
ep->dma_counter = (u16) (req->req.dma + req->req.actual);
@@ -686,13 +669,15 @@ finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status, int one)
return;
/* rx completion */
- UDC_DMA_IRQ_EN_REG &= ~UDC_RX_EOT_IE(ep->dma_channel);
+ w = omap_readw(UDC_DMA_IRQ_EN);
+ w &= ~UDC_RX_EOT_IE(ep->dma_channel);
+ omap_writew(w, UDC_DMA_IRQ_EN);
done(ep, req, status);
}
static void dma_irq(struct omap_udc *udc, u16 irq_src)
{
- u16 dman_stat = UDC_DMAN_STAT_REG;
+ u16 dman_stat = omap_readw(UDC_DMAN_STAT);
struct omap_ep *ep;
struct omap_req *req;
@@ -706,7 +691,7 @@ static void dma_irq(struct omap_udc *udc, u16 irq_src)
struct omap_req, queue);
finish_in_dma(ep, req, 0);
}
- UDC_IRQ_SRC_REG = UDC_TXN_DONE;
+ omap_writew(UDC_TXN_DONE, UDC_IRQ_SRC);
if (!list_empty (&ep->queue)) {
req = container_of(ep->queue.next,
@@ -725,7 +710,7 @@ static void dma_irq(struct omap_udc *udc, u16 irq_src)
struct omap_req, queue);
finish_out_dma(ep, req, 0, dman_stat & UDC_DMA_RX_SB);
}
- UDC_IRQ_SRC_REG = UDC_RXN_EOT;
+ omap_writew(UDC_RXN_EOT, UDC_IRQ_SRC);
if (!list_empty (&ep->queue)) {
req = container_of(ep->queue.next,
@@ -739,7 +724,7 @@ static void dma_irq(struct omap_udc *udc, u16 irq_src)
ep->irqs++;
/* omap15xx does this unasked... */
VDBG("%s, RX_CNT irq?\n", ep->ep.name);
- UDC_IRQ_SRC_REG = UDC_RXN_CNT;
+ omap_writew(UDC_RXN_CNT, UDC_IRQ_SRC);
}
}
@@ -762,9 +747,9 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
is_in = ep->bEndpointAddress & USB_DIR_IN;
if (is_in)
- reg = UDC_TXDMA_CFG_REG;
+ reg = omap_readw(UDC_TXDMA_CFG);
else
- reg = UDC_RXDMA_CFG_REG;
+ reg = omap_readw(UDC_RXDMA_CFG);
reg |= UDC_DMA_REQ; /* "pulse" activated */
ep->dma_channel = 0;
@@ -792,7 +777,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
status = omap_request_dma(dma_channel,
ep->ep.name, dma_error, ep, &ep->lch);
if (status == 0) {
- UDC_TXDMA_CFG_REG = reg;
+ omap_writew(reg, UDC_TXDMA_CFG);
/* EMIFF or SDRC */
omap_set_dma_src_burst_mode(ep->lch,
OMAP_DMA_DATA_BURST_4);
@@ -801,7 +786,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
omap_set_dma_dest_params(ep->lch,
OMAP_DMA_PORT_TIPB,
OMAP_DMA_AMODE_CONSTANT,
- (unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG),
+ (unsigned long) io_v2p(UDC_DATA_DMA),
0, 0);
}
} else {
@@ -813,12 +798,12 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
status = omap_request_dma(dma_channel,
ep->ep.name, dma_error, ep, &ep->lch);
if (status == 0) {
- UDC_RXDMA_CFG_REG = reg;
+ omap_writew(reg, UDC_RXDMA_CFG);
/* TIPB */
omap_set_dma_src_params(ep->lch,
OMAP_DMA_PORT_TIPB,
OMAP_DMA_AMODE_CONSTANT,
- (unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG),
+ (unsigned long) io_v2p(UDC_DATA_DMA),
0, 0);
/* EMIFF or SDRC */
omap_set_dma_dest_burst_mode(ep->lch,
@@ -834,7 +819,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
/* channel type P: hw synch (fifo) */
if (cpu_class_is_omap1() && !cpu_is_omap15xx())
- OMAP1_DMA_LCH_CTRL_REG(ep->lch) = 2;
+ omap_set_dma_channel_mode(ep->lch, OMAP_DMA_LCH_P);
}
just_restart:
@@ -860,7 +845,7 @@ just_restart:
(is_in ? write_fifo : read_fifo)(ep, req);
deselect_ep();
if (!is_in) {
- UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
ep->ackwait = 1 + ep->double_buf;
}
/* IN: 6 wait states before it'll tx */
@@ -881,7 +866,7 @@ static void dma_channel_release(struct omap_ep *ep)
else
req = NULL;
- active = ((1 << 7) & OMAP_DMA_CCR_REG(ep->lch)) != 0;
+ active = omap_get_dma_active_status(ep->lch);
DBG("%s release %s %cxdma%d %p\n", ep->ep.name,
active ? "active" : "idle",
@@ -894,23 +879,25 @@ static void dma_channel_release(struct omap_ep *ep)
/* wait till current packet DMA finishes, and fifo empties */
if (ep->bEndpointAddress & USB_DIR_IN) {
- UDC_TXDMA_CFG_REG = (UDC_TXDMA_CFG_REG & ~mask) | UDC_DMA_REQ;
+ omap_writew((omap_readw(UDC_TXDMA_CFG) & ~mask) | UDC_DMA_REQ,
+ UDC_TXDMA_CFG);
if (req) {
finish_in_dma(ep, req, -ECONNRESET);
/* clear FIFO; hosts probably won't empty it */
use_ep(ep, UDC_EP_SEL);
- UDC_CTRL_REG = UDC_CLR_EP;
+ omap_writew(UDC_CLR_EP, UDC_CTRL);
deselect_ep();
}
- while (UDC_TXDMA_CFG_REG & mask)
+ while (omap_readw(UDC_TXDMA_CFG) & mask)
udelay(10);
} else {
- UDC_RXDMA_CFG_REG = (UDC_RXDMA_CFG_REG & ~mask) | UDC_DMA_REQ;
+ omap_writew((omap_readw(UDC_RXDMA_CFG) & ~mask) | UDC_DMA_REQ,
+ UDC_RXDMA_CFG);
/* dma empties the fifo */
- while (UDC_RXDMA_CFG_REG & mask)
+ while (omap_readw(UDC_RXDMA_CFG) & mask)
udelay(10);
if (req)
finish_out_dma(ep, req, -ECONNRESET, 0);
@@ -997,9 +984,13 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
req->req.actual = 0;
/* maybe kickstart non-iso i/o queues */
- if (is_iso)
- UDC_IRQ_EN_REG |= UDC_SOF_IE;
- else if (list_empty(&ep->queue) && !ep->stopped && !ep->ackwait) {
+ if (is_iso) {
+ u16 w;
+
+ w = omap_readw(UDC_IRQ_EN);
+ w |= UDC_SOF_IE;
+ omap_writew(w, UDC_IRQ_EN);
+ } else if (list_empty(&ep->queue) && !ep->stopped && !ep->ackwait) {
int is_in;
if (ep->bEndpointAddress == 0) {
@@ -1017,23 +1008,23 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
* requests to non-control endpoints
*/
if (udc->ep0_set_config) {
- u16 irq_en = UDC_IRQ_EN_REG;
+ u16 irq_en = omap_readw(UDC_IRQ_EN);
irq_en |= UDC_DS_CHG_IE | UDC_EP0_IE;
if (!udc->ep0_reset_config)
irq_en |= UDC_EPN_RX_IE
| UDC_EPN_TX_IE;
- UDC_IRQ_EN_REG = irq_en;
+ omap_writew(irq_en, UDC_IRQ_EN);
}
/* STATUS for zero length DATA stages is
* always an IN ... even for IN transfers,
* a weird case which seem to stall OMAP.
*/
- UDC_EP_NUM_REG = (UDC_EP_SEL|UDC_EP_DIR);
- UDC_CTRL_REG = UDC_CLR_EP;
- UDC_CTRL_REG = UDC_SET_FIFO_EN;
- UDC_EP_NUM_REG = UDC_EP_DIR;
+ omap_writew(UDC_EP_SEL | UDC_EP_DIR, UDC_EP_NUM);
+ omap_writew(UDC_CLR_EP, UDC_CTRL);
+ omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
+ omap_writew(UDC_EP_DIR, UDC_EP_NUM);
/* cleanup */
udc->ep0_pending = 0;
@@ -1042,11 +1033,11 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
/* non-empty DATA stage */
} else if (is_in) {
- UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR;
+ omap_writew(UDC_EP_SEL | UDC_EP_DIR, UDC_EP_NUM);
} else {
if (udc->ep0_setup)
goto irq_wait;
- UDC_EP_NUM_REG = UDC_EP_SEL;
+ omap_writew(UDC_EP_SEL, UDC_EP_NUM);
}
} else {
is_in = ep->bEndpointAddress & USB_DIR_IN;
@@ -1062,7 +1053,7 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
req = NULL;
deselect_ep();
if (!is_in) {
- UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
ep->ackwait = 1 + ep->double_buf;
}
/* IN: 6 wait states before it'll tx */
@@ -1130,9 +1121,9 @@ static int omap_ep_set_halt(struct usb_ep *_ep, int value)
else if (value) {
if (ep->udc->ep0_set_config) {
WARN("error changing config?\n");
- UDC_SYSCON2_REG = UDC_CLR_CFG;
+ omap_writew(UDC_CLR_CFG, UDC_SYSCON2);
}
- UDC_SYSCON2_REG = UDC_STALL_CMD;
+ omap_writew(UDC_STALL_CMD, UDC_SYSCON2);
ep->udc->ep0_pending = 0;
status = 0;
} else /* NOP */
@@ -1159,8 +1150,8 @@ static int omap_ep_set_halt(struct usb_ep *_ep, int value)
channel = 0;
use_ep(ep, UDC_EP_SEL);
- if (UDC_STAT_FLG_REG & UDC_NON_ISO_FIFO_EMPTY) {
- UDC_CTRL_REG = UDC_SET_HALT;
+ if (omap_readw(UDC_STAT_FLG) & UDC_NON_ISO_FIFO_EMPTY) {
+ omap_writew(UDC_SET_HALT, UDC_CTRL);
status = 0;
} else
status = -EAGAIN;
@@ -1170,10 +1161,10 @@ static int omap_ep_set_halt(struct usb_ep *_ep, int value)
dma_channel_claim(ep, channel);
} else {
use_ep(ep, 0);
- UDC_CTRL_REG = ep->udc->clr_halt;
+ omap_writew(ep->udc->clr_halt, UDC_CTRL);
ep->ackwait = 0;
if (!(ep->bEndpointAddress & USB_DIR_IN)) {
- UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
ep->ackwait = 1 + ep->double_buf;
}
}
@@ -1205,7 +1196,7 @@ static struct usb_ep_ops omap_ep_ops = {
static int omap_get_frame(struct usb_gadget *gadget)
{
- u16 sof = UDC_SOF_REG;
+ u16 sof = omap_readw(UDC_SOF);
return (sof & UDC_TS_OK) ? (sof & UDC_TS) : -EL2NSYNC;
}
@@ -1224,7 +1215,7 @@ static int omap_wakeup(struct usb_gadget *gadget)
*/
if (udc->devstat & (UDC_B_HNP_ENABLE|UDC_R_WK_OK)) {
DBG("remote wakeup...\n");
- UDC_SYSCON2_REG = UDC_RMT_WKP;
+ omap_writew(UDC_RMT_WKP, UDC_SYSCON2);
retval = 0;
}
@@ -1247,12 +1238,12 @@ omap_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered)
udc = container_of(gadget, struct omap_udc, gadget);
spin_lock_irqsave(&udc->lock, flags);
- syscon1 = UDC_SYSCON1_REG;
+ syscon1 = omap_readw(UDC_SYSCON1);
if (is_selfpowered)
syscon1 |= UDC_SELF_PWR;
else
syscon1 &= ~UDC_SELF_PWR;
- UDC_SYSCON1_REG = syscon1;
+ omap_writew(syscon1, UDC_SYSCON1);
spin_unlock_irqrestore(&udc->lock, flags);
return 0;
@@ -1265,18 +1256,36 @@ static int can_pullup(struct omap_udc *udc)
static void pullup_enable(struct omap_udc *udc)
{
- UDC_SYSCON1_REG |= UDC_PULLUP_EN;
- if (!gadget_is_otg(&udc->gadget) && !cpu_is_omap15xx())
- OTG_CTRL_REG |= OTG_BSESSVLD;
- UDC_IRQ_EN_REG = UDC_DS_CHG_IE;
+ u16 w;
+
+ w = omap_readw(UDC_SYSCON1);
+ w |= UDC_PULLUP_EN;
+ omap_writew(w, UDC_SYSCON1);
+ if (!gadget_is_otg(&udc->gadget) && !cpu_is_omap15xx()) {
+ u32 l;
+
+ l = omap_readl(OTG_CTRL);
+ l |= OTG_BSESSVLD;
+ omap_writel(l, OTG_CTRL);
+ }
+ omap_writew(UDC_DS_CHG_IE, UDC_IRQ_EN);
}
static void pullup_disable(struct omap_udc *udc)
{
- if (!gadget_is_otg(&udc->gadget) && !cpu_is_omap15xx())
- OTG_CTRL_REG &= ~OTG_BSESSVLD;
- UDC_IRQ_EN_REG = UDC_DS_CHG_IE;
- UDC_SYSCON1_REG &= ~UDC_PULLUP_EN;
+ u16 w;
+
+ if (!gadget_is_otg(&udc->gadget) && !cpu_is_omap15xx()) {
+ u32 l;
+
+ l = omap_readl(OTG_CTRL);
+ l &= ~OTG_BSESSVLD;
+ omap_writel(l, OTG_CTRL);
+ }
+ omap_writew(UDC_DS_CHG_IE, UDC_IRQ_EN);
+ w = omap_readw(UDC_SYSCON1);
+ w &= ~UDC_PULLUP_EN;
+ omap_writew(w, UDC_SYSCON1);
}
static struct omap_udc *udc;
@@ -1304,6 +1313,7 @@ static int omap_vbus_session(struct usb_gadget *gadget, int is_active)
{
struct omap_udc *udc;
unsigned long flags;
+ u32 l;
udc = container_of(gadget, struct omap_udc, gadget);
spin_lock_irqsave(&udc->lock, flags);
@@ -1311,10 +1321,12 @@ static int omap_vbus_session(struct usb_gadget *gadget, int is_active)
udc->vbus_active = (is_active != 0);
if (cpu_is_omap15xx()) {
/* "software" detect, ignored if !VBUS_MODE_1510 */
+ l = omap_readl(FUNC_MUX_CTRL_0);
if (is_active)
- FUNC_MUX_CTRL_0_REG |= VBUS_CTRL_1510;
+ l |= VBUS_CTRL_1510;
else
- FUNC_MUX_CTRL_0_REG &= ~VBUS_CTRL_1510;
+ l &= ~VBUS_CTRL_1510;
+ omap_writel(l, FUNC_MUX_CTRL_0);
}
if (udc->dc_clk != NULL && is_active) {
if (!udc->clk_requested) {
@@ -1384,9 +1396,9 @@ static void nuke(struct omap_ep *ep, int status)
dma_channel_release(ep);
use_ep(ep, 0);
- UDC_CTRL_REG = UDC_CLR_EP;
+ omap_writew(UDC_CLR_EP, UDC_CTRL);
if (ep->bEndpointAddress && ep->bmAttributes != USB_ENDPOINT_XFER_ISOC)
- UDC_CTRL_REG = UDC_SET_HALT;
+ omap_writew(UDC_SET_HALT, UDC_CTRL);
while (!list_empty(&ep->queue)) {
req = list_entry(ep->queue.next, struct omap_req, queue);
@@ -1414,8 +1426,8 @@ static void update_otg(struct omap_udc *udc)
if (!gadget_is_otg(&udc->gadget))
return;
- if (OTG_CTRL_REG & OTG_ID)
- devstat = UDC_DEVSTAT_REG;
+ if (omap_readl(OTG_CTRL) & OTG_ID)
+ devstat = omap_readw(UDC_DEVSTAT);
else
devstat = 0;
@@ -1426,9 +1438,14 @@ static void update_otg(struct omap_udc *udc)
/* Enable HNP early, avoiding races on suspend irq path.
* ASSUMES OTG state machine B_BUS_REQ input is true.
*/
- if (udc->gadget.b_hnp_enable)
- OTG_CTRL_REG = (OTG_CTRL_REG | OTG_B_HNPEN | OTG_B_BUSREQ)
- & ~OTG_PULLUP;
+ if (udc->gadget.b_hnp_enable) {
+ u32 l;
+
+ l = omap_readl(OTG_CTRL);
+ l |= OTG_B_HNPEN | OTG_B_BUSREQ;
+ l &= ~OTG_PULLUP;
+ omap_writel(l, OTG_CTRL);
+ }
}
static void ep0_irq(struct omap_udc *udc, u16 irq_src)
@@ -1446,7 +1463,7 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
nuke(ep0, 0);
if (ack) {
- UDC_IRQ_SRC_REG = ack;
+ omap_writew(ack, UDC_IRQ_SRC);
irq_src = UDC_SETUP;
}
}
@@ -1466,9 +1483,9 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
if (irq_src & UDC_EP0_TX) {
int stat;
- UDC_IRQ_SRC_REG = UDC_EP0_TX;
- UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR;
- stat = UDC_STAT_FLG_REG;
+ omap_writew(UDC_EP0_TX, UDC_IRQ_SRC);
+ omap_writew(UDC_EP_SEL|UDC_EP_DIR, UDC_EP_NUM);
+ stat = omap_readw(UDC_STAT_FLG);
if (stat & UDC_ACK) {
if (udc->ep0_in) {
/* write next IN packet from response,
@@ -1476,26 +1493,26 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
*/
if (req)
stat = write_fifo(ep0, req);
- UDC_EP_NUM_REG = UDC_EP_DIR;
+ omap_writew(UDC_EP_DIR, UDC_EP_NUM);
if (!req && udc->ep0_pending) {
- UDC_EP_NUM_REG = UDC_EP_SEL;
- UDC_CTRL_REG = UDC_CLR_EP;
- UDC_CTRL_REG = UDC_SET_FIFO_EN;
- UDC_EP_NUM_REG = 0;
+ omap_writew(UDC_EP_SEL, UDC_EP_NUM);
+ omap_writew(UDC_CLR_EP, UDC_CTRL);
+ omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
+ omap_writew(0, UDC_EP_NUM);
udc->ep0_pending = 0;
} /* else: 6 wait states before it'll tx */
} else {
/* ack status stage of OUT transfer */
- UDC_EP_NUM_REG = UDC_EP_DIR;
+ omap_writew(UDC_EP_DIR, UDC_EP_NUM);
if (req)
done(ep0, req, 0);
}
req = NULL;
} else if (stat & UDC_STALL) {
- UDC_CTRL_REG = UDC_CLR_HALT;
- UDC_EP_NUM_REG = UDC_EP_DIR;
+ omap_writew(UDC_CLR_HALT, UDC_CTRL);
+ omap_writew(UDC_EP_DIR, UDC_EP_NUM);
} else {
- UDC_EP_NUM_REG = UDC_EP_DIR;
+ omap_writew(UDC_EP_DIR, UDC_EP_NUM);
}
}
@@ -1503,9 +1520,9 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
if (irq_src & UDC_EP0_RX) {
int stat;
- UDC_IRQ_SRC_REG = UDC_EP0_RX;
- UDC_EP_NUM_REG = UDC_EP_SEL;
- stat = UDC_STAT_FLG_REG;
+ omap_writew(UDC_EP0_RX, UDC_IRQ_SRC);
+ omap_writew(UDC_EP_SEL, UDC_EP_NUM);
+ stat = omap_readw(UDC_STAT_FLG);
if (stat & UDC_ACK) {
if (!udc->ep0_in) {
stat = 0;
@@ -1513,34 +1530,35 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
* reactiviting the fifo; stall on errors.
*/
if (!req || (stat = read_fifo(ep0, req)) < 0) {
- UDC_SYSCON2_REG = UDC_STALL_CMD;
+ omap_writew(UDC_STALL_CMD, UDC_SYSCON2);
udc->ep0_pending = 0;
stat = 0;
} else if (stat == 0)
- UDC_CTRL_REG = UDC_SET_FIFO_EN;
- UDC_EP_NUM_REG = 0;
+ omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
+ omap_writew(0, UDC_EP_NUM);
/* activate status stage */
if (stat == 1) {
done(ep0, req, 0);
/* that may have STALLed ep0... */
- UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR;
- UDC_CTRL_REG = UDC_CLR_EP;
- UDC_CTRL_REG = UDC_SET_FIFO_EN;
- UDC_EP_NUM_REG = UDC_EP_DIR;
+ omap_writew(UDC_EP_SEL | UDC_EP_DIR,
+ UDC_EP_NUM);
+ omap_writew(UDC_CLR_EP, UDC_CTRL);
+ omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
+ omap_writew(UDC_EP_DIR, UDC_EP_NUM);
udc->ep0_pending = 0;
}
} else {
/* ack status stage of IN transfer */
- UDC_EP_NUM_REG = 0;
+ omap_writew(0, UDC_EP_NUM);
if (req)
done(ep0, req, 0);
}
} else if (stat & UDC_STALL) {
- UDC_CTRL_REG = UDC_CLR_HALT;
- UDC_EP_NUM_REG = 0;
+ omap_writew(UDC_CLR_HALT, UDC_CTRL);
+ omap_writew(0, UDC_EP_NUM);
} else {
- UDC_EP_NUM_REG = 0;
+ omap_writew(0, UDC_EP_NUM);
}
}
@@ -1555,14 +1573,14 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
/* read the (latest) SETUP message */
do {
- UDC_EP_NUM_REG = UDC_SETUP_SEL;
+ omap_writew(UDC_SETUP_SEL, UDC_EP_NUM);
/* two bytes at a time */
- u.word[0] = UDC_DATA_REG;
- u.word[1] = UDC_DATA_REG;
- u.word[2] = UDC_DATA_REG;
- u.word[3] = UDC_DATA_REG;
- UDC_EP_NUM_REG = 0;
- } while (UDC_IRQ_SRC_REG & UDC_SETUP);
+ u.word[0] = omap_readw(UDC_DATA);
+ u.word[1] = omap_readw(UDC_DATA);
+ u.word[2] = omap_readw(UDC_DATA);
+ u.word[3] = omap_readw(UDC_DATA);
+ omap_writew(0, UDC_EP_NUM);
+ } while (omap_readw(UDC_IRQ_SRC) & UDC_SETUP);
#define w_value le16_to_cpu(u.r.wValue)
#define w_index le16_to_cpu(u.r.wIndex)
@@ -1593,9 +1611,9 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
* later if it fails the request.
*/
if (udc->ep0_reset_config)
- UDC_SYSCON2_REG = UDC_CLR_CFG;
+ omap_writew(UDC_CLR_CFG, UDC_SYSCON2);
else
- UDC_SYSCON2_REG = UDC_DEV_CFG;
+ omap_writew(UDC_DEV_CFG, UDC_SYSCON2);
update_otg(udc);
goto delegate;
case USB_REQ_CLEAR_FEATURE:
@@ -1613,10 +1631,10 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
|| !ep->desc)
goto do_stall;
use_ep(ep, 0);
- UDC_CTRL_REG = udc->clr_halt;
+ omap_writew(udc->clr_halt, UDC_CTRL);
ep->ackwait = 0;
if (!(ep->bEndpointAddress & USB_DIR_IN)) {
- UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
ep->ackwait = 1 + ep->double_buf;
}
/* NOTE: assumes the host behaves sanely,
@@ -1649,15 +1667,15 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
}
use_ep(ep, 0);
/* can't halt if fifo isn't empty... */
- UDC_CTRL_REG = UDC_CLR_EP;
- UDC_CTRL_REG = UDC_SET_HALT;
+ omap_writew(UDC_CLR_EP, UDC_CTRL);
+ omap_writew(UDC_SET_HALT, UDC_CTRL);
VDBG("%s halted by host\n", ep->name);
ep0out_status_stage:
status = 0;
- UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR;
- UDC_CTRL_REG = UDC_CLR_EP;
- UDC_CTRL_REG = UDC_SET_FIFO_EN;
- UDC_EP_NUM_REG = UDC_EP_DIR;
+ omap_writew(UDC_EP_SEL|UDC_EP_DIR, UDC_EP_NUM);
+ omap_writew(UDC_CLR_EP, UDC_CTRL);
+ omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
+ omap_writew(UDC_EP_DIR, UDC_EP_NUM);
udc->ep0_pending = 0;
break;
case USB_REQ_GET_STATUS:
@@ -1694,10 +1712,10 @@ intf_status:
zero_status:
/* return two zero bytes */
- UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR;
- UDC_DATA_REG = 0;
- UDC_CTRL_REG = UDC_SET_FIFO_EN;
- UDC_EP_NUM_REG = UDC_EP_DIR;
+ omap_writew(UDC_EP_SEL|UDC_EP_DIR, UDC_EP_NUM);
+ omap_writew(0, UDC_DATA);
+ omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
+ omap_writew(UDC_EP_DIR, UDC_EP_NUM);
status = 0;
VDBG("GET_STATUS, interface %d\n", w_index);
/* next, status stage */
@@ -1706,8 +1724,8 @@ zero_status:
delegate:
/* activate the ep0out fifo right away */
if (!udc->ep0_in && w_length) {
- UDC_EP_NUM_REG = 0;
- UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ omap_writew(0, UDC_EP_NUM);
+ omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
}
/* gadget drivers see class/vendor specific requests,
@@ -1748,9 +1766,9 @@ do_stall:
if (udc->ep0_reset_config)
WARN("error resetting config?\n");
else
- UDC_SYSCON2_REG = UDC_CLR_CFG;
+ omap_writew(UDC_CLR_CFG, UDC_SYSCON2);
}
- UDC_SYSCON2_REG = UDC_STALL_CMD;
+ omap_writew(UDC_STALL_CMD, UDC_SYSCON2);
udc->ep0_pending = 0;
}
}
@@ -1764,7 +1782,7 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src)
{
u16 devstat, change;
- devstat = UDC_DEVSTAT_REG;
+ devstat = omap_readw(UDC_DEVSTAT);
change = devstat ^ udc->devstat;
udc->devstat = devstat;
@@ -1804,7 +1822,8 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src)
INFO("USB reset done, gadget %s\n",
udc->driver->driver.name);
/* ep0 traffic is legal from now on */
- UDC_IRQ_EN_REG = UDC_DS_CHG_IE | UDC_EP0_IE;
+ omap_writew(UDC_DS_CHG_IE | UDC_EP0_IE,
+ UDC_IRQ_EN);
}
change &= ~UDC_USB_RESET;
}
@@ -1848,7 +1867,7 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src)
VDBG("devstat %03x, ignore change %03x\n",
devstat, change);
- UDC_IRQ_SRC_REG = UDC_DS_CHG;
+ omap_writew(UDC_DS_CHG, UDC_IRQ_SRC);
}
static irqreturn_t omap_udc_irq(int irq, void *_udc)
@@ -1859,7 +1878,7 @@ static irqreturn_t omap_udc_irq(int irq, void *_udc)
unsigned long flags;
spin_lock_irqsave(&udc->lock, flags);
- irq_src = UDC_IRQ_SRC_REG;
+ irq_src = omap_readw(UDC_IRQ_SRC);
/* Device state change (usb ch9 stuff) */
if (irq_src & UDC_DS_CHG) {
@@ -1882,7 +1901,7 @@ static irqreturn_t omap_udc_irq(int irq, void *_udc)
irq_src &= ~(UDC_TXN_DONE|UDC_RXN_CNT|UDC_RXN_EOT);
}
- irq_src &= ~(UDC_SOF|UDC_EPN_TX|UDC_EPN_RX);
+ irq_src &= ~(UDC_IRQ_SOF | UDC_EPN_TX|UDC_EPN_RX);
if (irq_src)
DBG("udc_irq, unhandled %03x\n", irq_src);
spin_unlock_irqrestore(&udc->lock, flags);
@@ -1903,7 +1922,7 @@ static void pio_out_timer(unsigned long _ep)
spin_lock_irqsave(&ep->udc->lock, flags);
if (!list_empty(&ep->queue) && ep->ackwait) {
use_ep(ep, UDC_EP_SEL);
- stat_flg = UDC_STAT_FLG_REG;
+ stat_flg = omap_readw(UDC_STAT_FLG);
if ((stat_flg & UDC_ACK) && (!(stat_flg & UDC_FIFO_EN)
|| (ep->double_buf && HALF_FULL(stat_flg)))) {
@@ -1913,8 +1932,8 @@ static void pio_out_timer(unsigned long _ep)
req = container_of(ep->queue.next,
struct omap_req, queue);
(void) read_fifo(ep, req);
- UDC_EP_NUM_REG = ep->bEndpointAddress;
- UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ omap_writew(ep->bEndpointAddress, UDC_EP_NUM);
+ omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
ep->ackwait = 1 + ep->double_buf;
} else
deselect_ep();
@@ -1934,20 +1953,20 @@ static irqreturn_t omap_udc_pio_irq(int irq, void *_dev)
unsigned long flags;
spin_lock_irqsave(&udc->lock, flags);
- epn_stat = UDC_EPN_STAT_REG;
- irq_src = UDC_IRQ_SRC_REG;
+ epn_stat = omap_readw(UDC_EPN_STAT);
+ irq_src = omap_readw(UDC_IRQ_SRC);
/* handle OUT first, to avoid some wasteful NAKs */
if (irq_src & UDC_EPN_RX) {
epnum = (epn_stat >> 8) & 0x0f;
- UDC_IRQ_SRC_REG = UDC_EPN_RX;
+ omap_writew(UDC_EPN_RX, UDC_IRQ_SRC);
status = IRQ_HANDLED;
ep = &udc->ep[epnum];
ep->irqs++;
- UDC_EP_NUM_REG = epnum | UDC_EP_SEL;
+ omap_writew(epnum | UDC_EP_SEL, UDC_EP_NUM);
ep->fnf = 0;
- if ((UDC_STAT_FLG_REG & UDC_ACK)) {
+ if (omap_readw(UDC_STAT_FLG) & UDC_ACK) {
ep->ackwait--;
if (!list_empty(&ep->queue)) {
int stat;
@@ -1959,15 +1978,15 @@ static irqreturn_t omap_udc_pio_irq(int irq, void *_dev)
}
}
/* min 6 clock delay before clearing EP_SEL ... */
- epn_stat = UDC_EPN_STAT_REG;
- epn_stat = UDC_EPN_STAT_REG;
- UDC_EP_NUM_REG = epnum;
+ epn_stat = omap_readw(UDC_EPN_STAT);
+ epn_stat = omap_readw(UDC_EPN_STAT);
+ omap_writew(epnum, UDC_EP_NUM);
/* enabling fifo _after_ clearing ACK, contrary to docs,
* reduces lossage; timer still needed though (sigh).
*/
if (ep->fnf) {
- UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
ep->ackwait = 1 + ep->double_buf;
}
mod_timer(&ep->timer, PIO_OUT_TIMEOUT);
@@ -1976,13 +1995,13 @@ static irqreturn_t omap_udc_pio_irq(int irq, void *_dev)
/* then IN transfers */
else if (irq_src & UDC_EPN_TX) {
epnum = epn_stat & 0x0f;
- UDC_IRQ_SRC_REG = UDC_EPN_TX;
+ omap_writew(UDC_EPN_TX, UDC_IRQ_SRC);
status = IRQ_HANDLED;
ep = &udc->ep[16 + epnum];
ep->irqs++;
- UDC_EP_NUM_REG = epnum | UDC_EP_DIR | UDC_EP_SEL;
- if ((UDC_STAT_FLG_REG & UDC_ACK)) {
+ omap_writew(epnum | UDC_EP_DIR | UDC_EP_SEL, UDC_EP_NUM);
+ if (omap_readw(UDC_STAT_FLG) & UDC_ACK) {
ep->ackwait = 0;
if (!list_empty(&ep->queue)) {
req = container_of(ep->queue.next,
@@ -1991,9 +2010,9 @@ static irqreturn_t omap_udc_pio_irq(int irq, void *_dev)
}
}
/* min 6 clock delay before clearing EP_SEL ... */
- epn_stat = UDC_EPN_STAT_REG;
- epn_stat = UDC_EPN_STAT_REG;
- UDC_EP_NUM_REG = epnum | UDC_EP_DIR;
+ epn_stat = omap_readw(UDC_EPN_STAT);
+ epn_stat = omap_readw(UDC_EPN_STAT);
+ omap_writew(epnum | UDC_EP_DIR, UDC_EP_NUM);
/* then 6 clocks before it'd tx */
}
@@ -2021,7 +2040,7 @@ static irqreturn_t omap_udc_iso_irq(int irq, void *_dev)
req = list_entry(ep->queue.next, struct omap_req, queue);
use_ep(ep, UDC_EP_SEL);
- stat = UDC_STAT_FLG_REG;
+ stat = omap_readw(UDC_STAT_FLG);
/* NOTE: like the other controller drivers, this isn't
* currently reporting lost or damaged frames.
@@ -2053,9 +2072,14 @@ static irqreturn_t omap_udc_iso_irq(int irq, void *_dev)
if (!list_empty(&ep->queue))
pending = 1;
}
- if (!pending)
- UDC_IRQ_EN_REG &= ~UDC_SOF_IE;
- UDC_IRQ_SRC_REG = UDC_SOF;
+ if (!pending) {
+ u16 w;
+
+ w = omap_readw(UDC_IRQ_EN);
+ w &= ~UDC_SOF_IE;
+ omap_writew(w, UDC_IRQ_EN);
+ }
+ omap_writew(UDC_IRQ_SOF, UDC_IRQ_SRC);
spin_unlock_irqrestore(&udc->lock, flags);
return IRQ_HANDLED;
@@ -2104,7 +2128,7 @@ int usb_gadget_register_driver (struct usb_gadget_driver *driver)
if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
continue;
use_ep(ep, 0);
- UDC_CTRL_REG = UDC_SET_HALT;
+ omap_writew(UDC_SET_HALT, UDC_CTRL);
}
udc->ep0_pending = 0;
udc->ep[0].irqs = 0;
@@ -2128,7 +2152,7 @@ int usb_gadget_register_driver (struct usb_gadget_driver *driver)
}
DBG("bound to driver %s\n", driver->driver.name);
- UDC_IRQ_SRC_REG = UDC_IRQ_SRC_MASK;
+ omap_writew(UDC_IRQ_SRC_MASK, UDC_IRQ_SRC);
/* connect to bus through transceiver */
if (udc->transceiver) {
@@ -2225,7 +2249,7 @@ static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
else
buf[0] = 0;
- stat_flg = UDC_STAT_FLG_REG;
+ stat_flg = omap_readw(UDC_STAT_FLG);
seq_printf(s,
"\n%s %s%s%sirqs %ld stat %04x " EIGHTBITS FOURBITS "%s\n",
ep->name, buf,
@@ -2292,11 +2316,11 @@ static int proc_otg_show(struct seq_file *s)
trans = CONTROL_DEVCONF_REG;
} else {
ctrl_name = "tranceiver_ctrl";
- trans = USB_TRANSCEIVER_CTRL_REG;
+ trans = omap_readw(USB_TRANSCEIVER_CTRL);
}
seq_printf(s, "\nOTG rev %d.%d, %s %05x\n",
tmp >> 4, tmp & 0xf, ctrl_name, trans);
- tmp = OTG_SYSCON_1_REG;
+ tmp = omap_readw(OTG_SYSCON_1);
seq_printf(s, "otg_syscon1 %08x usb2 %s, usb1 %s, usb0 %s,"
FOURBITS "\n", tmp,
trx_mode(USB2_TRX_MODE(tmp), trans & CONF_USB2_UNI_R),
@@ -2308,7 +2332,7 @@ static int proc_otg_show(struct seq_file *s)
(tmp & HST_IDLE_EN) ? " !host" : "",
(tmp & DEV_IDLE_EN) ? " !dev" : "",
(tmp & OTG_RESET_DONE) ? " reset_done" : " reset_active");
- tmp = OTG_SYSCON_2_REG;
+ tmp = omap_readl(OTG_SYSCON_2);
seq_printf(s, "otg_syscon2 %08x%s" EIGHTBITS
" b_ase_brst=%d hmc=%d\n", tmp,
(tmp & OTG_EN) ? " otg_en" : "",
@@ -2323,7 +2347,7 @@ static int proc_otg_show(struct seq_file *s)
(tmp & HMC_TLLATTACH) ? " tllattach" : "",
B_ASE_BRST(tmp),
OTG_HMC(tmp));
- tmp = OTG_CTRL_REG;
+ tmp = omap_readl(OTG_CTRL);
seq_printf(s, "otg_ctrl %06x" EIGHTBITS EIGHTBITS "%s\n", tmp,
(tmp & OTG_ASESSVLD) ? " asess" : "",
(tmp & OTG_BSESSEND) ? " bsess_end" : "",
@@ -2343,13 +2367,13 @@ static int proc_otg_show(struct seq_file *s)
(tmp & OTG_PU_VBUS) ? " pu_vb" : "",
(tmp & OTG_PU_ID) ? " pu_id" : ""
);
- tmp = OTG_IRQ_EN_REG;
+ tmp = omap_readw(OTG_IRQ_EN);
seq_printf(s, "otg_irq_en %04x" "\n", tmp);
- tmp = OTG_IRQ_SRC_REG;
+ tmp = omap_readw(OTG_IRQ_SRC);
seq_printf(s, "otg_irq_src %04x" "\n", tmp);
- tmp = OTG_OUTCTRL_REG;
+ tmp = omap_readw(OTG_OUTCTRL);
seq_printf(s, "otg_outctrl %04x" "\n", tmp);
- tmp = OTG_TEST_REG;
+ tmp = omap_readw(OTG_TEST);
seq_printf(s, "otg_test %04x" "\n", tmp);
return 0;
}
@@ -2370,7 +2394,7 @@ static int proc_udc_show(struct seq_file *s, void *_)
driver_desc,
use_dma ? " (dma)" : "");
- tmp = UDC_REV_REG & 0xff;
+ tmp = omap_readw(UDC_REV) & 0xff;
seq_printf(s,
"UDC rev %d.%d, fifo mode %d, gadget %s\n"
"hmc %d, transceiver %s\n",
@@ -2384,16 +2408,16 @@ static int proc_udc_show(struct seq_file *s, void *_)
? "external" : "(none)"));
if (cpu_class_is_omap1()) {
seq_printf(s, "ULPD control %04x req %04x status %04x\n",
- __REG16(ULPD_CLOCK_CTRL),
- __REG16(ULPD_SOFT_REQ),
- __REG16(ULPD_STATUS_REQ));
+ omap_readw(ULPD_CLOCK_CTRL),
+ omap_readw(ULPD_SOFT_REQ),
+ omap_readw(ULPD_STATUS_REQ));
}
/* OTG controller registers */
if (!cpu_is_omap15xx())
proc_otg_show(s);
- tmp = UDC_SYSCON1_REG;
+ tmp = omap_readw(UDC_SYSCON1);
seq_printf(s, "\nsyscon1 %04x" EIGHTBITS "\n", tmp,
(tmp & UDC_CFG_LOCK) ? " cfg_lock" : "",
(tmp & UDC_DATA_ENDIAN) ? " data_endian" : "",
@@ -2412,7 +2436,7 @@ static int proc_udc_show(struct seq_file *s, void *_)
return 0;
}
- tmp = UDC_DEVSTAT_REG;
+ tmp = omap_readw(UDC_DEVSTAT);
seq_printf(s, "devstat %04x" EIGHTBITS "%s%s\n", tmp,
(tmp & UDC_B_HNP_ENABLE) ? " b_hnp" : "",
(tmp & UDC_A_HNP_SUPPORT) ? " a_hnp" : "",
@@ -2424,20 +2448,20 @@ static int proc_udc_show(struct seq_file *s, void *_)
(tmp & UDC_ADD) ? " ADD" : "",
(tmp & UDC_DEF) ? " DEF" : "",
(tmp & UDC_ATT) ? " ATT" : "");
- seq_printf(s, "sof %04x\n", UDC_SOF_REG);
- tmp = UDC_IRQ_EN_REG;
+ seq_printf(s, "sof %04x\n", omap_readw(UDC_SOF));
+ tmp = omap_readw(UDC_IRQ_EN);
seq_printf(s, "irq_en %04x" FOURBITS "%s\n", tmp,
(tmp & UDC_SOF_IE) ? " sof" : "",
(tmp & UDC_EPN_RX_IE) ? " epn_rx" : "",
(tmp & UDC_EPN_TX_IE) ? " epn_tx" : "",
(tmp & UDC_DS_CHG_IE) ? " ds_chg" : "",
(tmp & UDC_EP0_IE) ? " ep0" : "");
- tmp = UDC_IRQ_SRC_REG;
+ tmp = omap_readw(UDC_IRQ_SRC);
seq_printf(s, "irq_src %04x" EIGHTBITS "%s%s\n", tmp,
(tmp & UDC_TXN_DONE) ? " txn_done" : "",
(tmp & UDC_RXN_CNT) ? " rxn_cnt" : "",
(tmp & UDC_RXN_EOT) ? " rxn_eot" : "",
- (tmp & UDC_SOF) ? " sof" : "",
+ (tmp & UDC_IRQ_SOF) ? " sof" : "",
(tmp & UDC_EPN_RX) ? " epn_rx" : "",
(tmp & UDC_EPN_TX) ? " epn_tx" : "",
(tmp & UDC_DS_CHG) ? " ds_chg" : "",
@@ -2447,7 +2471,7 @@ static int proc_udc_show(struct seq_file *s, void *_)
if (use_dma) {
unsigned i;
- tmp = UDC_DMA_IRQ_EN_REG;
+ tmp = omap_readw(UDC_DMA_IRQ_EN);
seq_printf(s, "dma_irq_en %04x%s" EIGHTBITS "\n", tmp,
(tmp & UDC_TX_DONE_IE(3)) ? " tx2_done" : "",
(tmp & UDC_RX_CNT_IE(3)) ? " rx2_cnt" : "",
@@ -2461,29 +2485,29 @@ static int proc_udc_show(struct seq_file *s, void *_)
(tmp & UDC_RX_CNT_IE(1)) ? " rx0_cnt" : "",
(tmp & UDC_RX_EOT_IE(1)) ? " rx0_eot" : "");
- tmp = UDC_RXDMA_CFG_REG;
+ tmp = omap_readw(UDC_RXDMA_CFG);
seq_printf(s, "rxdma_cfg %04x\n", tmp);
if (tmp) {
for (i = 0; i < 3; i++) {
if ((tmp & (0x0f << (i * 4))) == 0)
continue;
seq_printf(s, "rxdma[%d] %04x\n", i,
- UDC_RXDMA_REG(i + 1));
+ omap_readw(UDC_RXDMA(i + 1)));
}
}
- tmp = UDC_TXDMA_CFG_REG;
+ tmp = omap_readw(UDC_TXDMA_CFG);
seq_printf(s, "txdma_cfg %04x\n", tmp);
if (tmp) {
for (i = 0; i < 3; i++) {
if (!(tmp & (0x0f << (i * 4))))
continue;
seq_printf(s, "txdma[%d] %04x\n", i,
- UDC_TXDMA_REG(i + 1));
+ omap_readw(UDC_TXDMA(i + 1)));
}
}
}
- tmp = UDC_DEVSTAT_REG;
+ tmp = omap_readw(UDC_DEVSTAT);
if (tmp & UDC_ATT) {
proc_ep_show(s, &udc->ep[0]);
if (tmp & UDC_ADD) {
@@ -2535,7 +2559,7 @@ static inline void remove_proc_file(void) {}
* buffer space among the endpoints we'll be operating.
*
* NOTE: as of OMAP 1710 ES2.0, writing a new endpoint config when
- * UDC_SYSCON_1_REG.CFG_LOCK is set can now work. We won't use that
+ * UDC_SYSCON_1.CFG_LOCK is set can now work. We won't use that
* capability yet though.
*/
static unsigned __init
@@ -2597,9 +2621,9 @@ omap_ep_setup(char *name, u8 addr, u8 type,
name, addr, epn_rxtx, maxp, dbuf ? "x2" : "", buf);
if (addr & USB_DIR_IN)
- UDC_EP_TX_REG(addr & 0xf) = epn_rxtx;
+ omap_writew(epn_rxtx, UDC_EP_TX(addr & 0xf));
else
- UDC_EP_RX_REG(addr) = epn_rxtx;
+ omap_writew(epn_rxtx, UDC_EP_RX(addr));
/* next endpoint's buffer starts after this one's */
buf += maxp;
@@ -2638,15 +2662,15 @@ omap_udc_setup(struct platform_device *odev, struct otg_transceiver *xceiv)
unsigned tmp, buf;
/* abolish any previous hardware state */
- UDC_SYSCON1_REG = 0;
- UDC_IRQ_EN_REG = 0;
- UDC_IRQ_SRC_REG = UDC_IRQ_SRC_MASK;
- UDC_DMA_IRQ_EN_REG = 0;
- UDC_RXDMA_CFG_REG = 0;
- UDC_TXDMA_CFG_REG = 0;
+ omap_writew(0, UDC_SYSCON1);
+ omap_writew(0, UDC_IRQ_EN);
+ omap_writew(UDC_IRQ_SRC_MASK, UDC_IRQ_SRC);
+ omap_writew(0, UDC_DMA_IRQ_EN);
+ omap_writew(0, UDC_RXDMA_CFG);
+ omap_writew(0, UDC_TXDMA_CFG);
/* UDC_PULLUP_EN gates the chip clock */
- // OTG_SYSCON_1_REG |= DEV_IDLE_EN;
+ // OTG_SYSCON_1 |= DEV_IDLE_EN;
udc = kzalloc(sizeof(*udc), GFP_KERNEL);
if (!udc)
@@ -2677,8 +2701,8 @@ omap_udc_setup(struct platform_device *odev, struct otg_transceiver *xceiv)
/* initially disable all non-ep0 endpoints */
for (tmp = 1; tmp < 15; tmp++) {
- UDC_EP_RX_REG(tmp) = 0;
- UDC_EP_TX_REG(tmp) = 0;
+ omap_writew(0, UDC_EP_RX(tmp));
+ omap_writew(0, UDC_EP_TX(tmp));
}
#define OMAP_BULK_EP(name,addr) \
@@ -2763,7 +2787,7 @@ omap_udc_setup(struct platform_device *odev, struct otg_transceiver *xceiv)
ERR("unsupported fifo_mode #%d\n", fifo_mode);
return -ENODEV;
}
- UDC_SYSCON1_REG = UDC_CFG_LOCK|UDC_SELF_PWR;
+ omap_writew(UDC_CFG_LOCK|UDC_SELF_PWR, UDC_SYSCON1);
INFO("fifo mode %d, %d bytes not used\n", fifo_mode, 2048 - buf);
return 0;
}
@@ -2807,7 +2831,7 @@ static int __init omap_udc_probe(struct platform_device *pdev)
}
INFO("OMAP UDC rev %d.%d%s\n",
- UDC_REV_REG >> 4, UDC_REV_REG & 0xf,
+ omap_readw(UDC_REV) >> 4, omap_readw(UDC_REV) & 0xf,
config->otg ? ", Mini-AB" : "");
/* use the mode given to us by board init code */
@@ -2822,12 +2846,12 @@ static int __init omap_udc_probe(struct platform_device *pdev)
* know when to turn PULLUP_EN on/off; and that
* means we always "need" the 48MHz clock.
*/
- u32 tmp = FUNC_MUX_CTRL_0_REG;
-
- FUNC_MUX_CTRL_0_REG &= ~VBUS_CTRL_1510;
+ u32 tmp = omap_readl(FUNC_MUX_CTRL_0);
+ tmp &= ~VBUS_CTRL_1510;
+ omap_writel(tmp, FUNC_MUX_CTRL_0);
tmp |= VBUS_MODE_1510;
tmp &= ~VBUS_CTRL_1510;
- FUNC_MUX_CTRL_0_REG = tmp;
+ omap_writel(tmp, FUNC_MUX_CTRL_0);
}
} else {
/* The transceiver may package some GPIO logic or handle
@@ -2907,7 +2931,7 @@ known:
#endif
/* starting with omap1710 es2.0, clear toggle is a separate bit */
- if (UDC_REV_REG >= 0x61)
+ if (omap_readw(UDC_REV) >= 0x61)
udc->clr_halt = UDC_RESET_EP | UDC_CLRDATA_TOGGLE;
else
udc->clr_halt = UDC_RESET_EP;
@@ -3005,7 +3029,7 @@ static int __exit omap_udc_remove(struct platform_device *pdev)
put_device(udc->transceiver->dev);
udc->transceiver = NULL;
}
- UDC_SYSCON1_REG = 0;
+ omap_writew(0, UDC_SYSCON1);
remove_proc_file();
@@ -3036,7 +3060,7 @@ static int __exit omap_udc_remove(struct platform_device *pdev)
*
* REVISIT we should probably reject suspend requests when there's a host
* session active, rather than disconnecting, at least on boards that can
- * report VBUS irqs (UDC_DEVSTAT_REG.UDC_ATT). And in any case, we need to
+ * report VBUS irqs (UDC_DEVSTAT.UDC_ATT). And in any case, we need to
* make host resumes and VBUS detection trigger OMAP wakeup events; that
* may involve talking to an external transceiver (e.g. isp1301).
*/
@@ -3045,7 +3069,7 @@ static int omap_udc_suspend(struct platform_device *dev, pm_message_t message)
{
u32 devstat;
- devstat = UDC_DEVSTAT_REG;
+ devstat = omap_readw(UDC_DEVSTAT);
/* we're requesting 48 MHz clock if the pullup is enabled
* (== we're attached to the host) and we're not suspended,
diff --git a/drivers/usb/gadget/omap_udc.h b/drivers/usb/gadget/omap_udc.h
index c6b9cbc7230a..8522bbb12278 100644
--- a/drivers/usb/gadget/omap_udc.h
+++ b/drivers/usb/gadget/omap_udc.h
@@ -8,23 +8,22 @@
/*
* USB device/endpoint management registers
*/
-#define UDC_REG(offset) __REG16(UDC_BASE + (offset))
-#define UDC_REV_REG UDC_REG(0x0) /* Revision */
-#define UDC_EP_NUM_REG UDC_REG(0x4) /* Which endpoint */
+#define UDC_REV (UDC_BASE + 0x0) /* Revision */
+#define UDC_EP_NUM (UDC_BASE + 0x4) /* Which endpoint */
# define UDC_SETUP_SEL (1 << 6)
# define UDC_EP_SEL (1 << 5)
# define UDC_EP_DIR (1 << 4)
/* low 4 bits for endpoint number */
-#define UDC_DATA_REG UDC_REG(0x08) /* Endpoint FIFO */
-#define UDC_CTRL_REG UDC_REG(0x0C) /* Endpoint control */
+#define UDC_DATA (UDC_BASE + 0x08) /* Endpoint FIFO */
+#define UDC_CTRL (UDC_BASE + 0x0C) /* Endpoint control */
# define UDC_CLR_HALT (1 << 7)
# define UDC_SET_HALT (1 << 6)
# define UDC_CLRDATA_TOGGLE (1 << 3)
# define UDC_SET_FIFO_EN (1 << 2)
# define UDC_CLR_EP (1 << 1)
# define UDC_RESET_EP (1 << 0)
-#define UDC_STAT_FLG_REG UDC_REG(0x10) /* Endpoint status */
+#define UDC_STAT_FLG (UDC_BASE + 0x10) /* Endpoint status */
# define UDC_NO_RXPACKET (1 << 15)
# define UDC_MISS_IN (1 << 14)
# define UDC_DATA_FLUSH (1 << 13)
@@ -38,8 +37,8 @@
# define UDC_FIFO_EN (1 << 2)
# define UDC_NON_ISO_FIFO_EMPTY (1 << 1)
# define UDC_NON_ISO_FIFO_FULL (1 << 0)
-#define UDC_RXFSTAT_REG UDC_REG(0x14) /* OUT bytecount */
-#define UDC_SYSCON1_REG UDC_REG(0x18) /* System config 1 */
+#define UDC_RXFSTAT (UDC_BASE + 0x14) /* OUT bytecount */
+#define UDC_SYSCON1 (UDC_BASE + 0x18) /* System config 1 */
# define UDC_CFG_LOCK (1 << 8)
# define UDC_DATA_ENDIAN (1 << 7)
# define UDC_DMA_ENDIAN (1 << 6)
@@ -48,12 +47,12 @@
# define UDC_SELF_PWR (1 << 2)
# define UDC_SOFF_DIS (1 << 1)
# define UDC_PULLUP_EN (1 << 0)
-#define UDC_SYSCON2_REG UDC_REG(0x1C) /* System config 2 */
+#define UDC_SYSCON2 (UDC_BASE + 0x1C) /* System config 2 */
# define UDC_RMT_WKP (1 << 6)
# define UDC_STALL_CMD (1 << 5)
# define UDC_DEV_CFG (1 << 3)
# define UDC_CLR_CFG (1 << 2)
-#define UDC_DEVSTAT_REG UDC_REG(0x20) /* Device status */
+#define UDC_DEVSTAT (UDC_BASE + 0x20) /* Device status */
# define UDC_B_HNP_ENABLE (1 << 9)
# define UDC_A_HNP_SUPPORT (1 << 8)
# define UDC_A_ALT_HNP_SUPPORT (1 << 7)
@@ -64,26 +63,26 @@
# define UDC_ADD (1 << 2)
# define UDC_DEF (1 << 1)
# define UDC_ATT (1 << 0)
-#define UDC_SOF_REG UDC_REG(0x24) /* Start of frame */
+#define UDC_SOF (UDC_BASE + 0x24) /* Start of frame */
# define UDC_FT_LOCK (1 << 12)
# define UDC_TS_OK (1 << 11)
# define UDC_TS 0x03ff
-#define UDC_IRQ_EN_REG UDC_REG(0x28) /* Interrupt enable */
+#define UDC_IRQ_EN (UDC_BASE + 0x28) /* Interrupt enable */
# define UDC_SOF_IE (1 << 7)
# define UDC_EPN_RX_IE (1 << 5)
# define UDC_EPN_TX_IE (1 << 4)
# define UDC_DS_CHG_IE (1 << 3)
# define UDC_EP0_IE (1 << 0)
-#define UDC_DMA_IRQ_EN_REG UDC_REG(0x2C) /* DMA irq enable */
+#define UDC_DMA_IRQ_EN (UDC_BASE + 0x2C) /* DMA irq enable */
/* rx/tx dma channels numbered 1-3 not 0-2 */
# define UDC_TX_DONE_IE(n) (1 << (4 * (n) - 2))
# define UDC_RX_CNT_IE(n) (1 << (4 * (n) - 3))
# define UDC_RX_EOT_IE(n) (1 << (4 * (n) - 4))
-#define UDC_IRQ_SRC_REG UDC_REG(0x30) /* Interrupt source */
+#define UDC_IRQ_SRC (UDC_BASE + 0x30) /* Interrupt source */
# define UDC_TXN_DONE (1 << 10)
# define UDC_RXN_CNT (1 << 9)
# define UDC_RXN_EOT (1 << 8)
-# define UDC_SOF (1 << 7)
+# define UDC_IRQ_SOF (1 << 7)
# define UDC_EPN_RX (1 << 5)
# define UDC_EPN_TX (1 << 4)
# define UDC_DS_CHG (1 << 3)
@@ -91,41 +90,41 @@
# define UDC_EP0_RX (1 << 1)
# define UDC_EP0_TX (1 << 0)
# define UDC_IRQ_SRC_MASK 0x7bf
-#define UDC_EPN_STAT_REG UDC_REG(0x34) /* EP irq status */
-#define UDC_DMAN_STAT_REG UDC_REG(0x38) /* DMA irq status */
+#define UDC_EPN_STAT (UDC_BASE + 0x34) /* EP irq status */
+#define UDC_DMAN_STAT (UDC_BASE + 0x38) /* DMA irq status */
# define UDC_DMA_RX_SB (1 << 12)
# define UDC_DMA_RX_SRC(x) (((x)>>8) & 0xf)
# define UDC_DMA_TX_SRC(x) (((x)>>0) & 0xf)
/* DMA configuration registers: up to three channels in each direction. */
-#define UDC_RXDMA_CFG_REG UDC_REG(0x40) /* 3 eps for RX DMA */
+#define UDC_RXDMA_CFG (UDC_BASE + 0x40) /* 3 eps for RX DMA */
# define UDC_DMA_REQ (1 << 12)
-#define UDC_TXDMA_CFG_REG UDC_REG(0x44) /* 3 eps for TX DMA */
-#define UDC_DATA_DMA_REG UDC_REG(0x48) /* rx/tx fifo addr */
+#define UDC_TXDMA_CFG (UDC_BASE + 0x44) /* 3 eps for TX DMA */
+#define UDC_DATA_DMA (UDC_BASE + 0x48) /* rx/tx fifo addr */
/* rx/tx dma control, numbering channels 1-3 not 0-2 */
-#define UDC_TXDMA_REG(chan) UDC_REG(0x50 - 4 + 4 * (chan))
+#define UDC_TXDMA(chan) (UDC_BASE + 0x50 - 4 + 4 * (chan))
# define UDC_TXN_EOT (1 << 15) /* bytes vs packets */
# define UDC_TXN_START (1 << 14) /* start transfer */
# define UDC_TXN_TSC 0x03ff /* units in xfer */
-#define UDC_RXDMA_REG(chan) UDC_REG(0x60 - 4 + 4 * (chan))
+#define UDC_RXDMA(chan) (UDC_BASE + 0x60 - 4 + 4 * (chan))
# define UDC_RXN_STOP (1 << 15) /* enable EOT irq */
# define UDC_RXN_TC 0x00ff /* packets in xfer */
/*
* Endpoint configuration registers (used before CFG_LOCK is set)
- * UDC_EP_TX_REG(0) is unused
+ * UDC_EP_TX(0) is unused
*/
-#define UDC_EP_RX_REG(endpoint) UDC_REG(0x80 + (endpoint)*4)
+#define UDC_EP_RX(endpoint) (UDC_BASE + 0x80 + (endpoint)*4)
# define UDC_EPN_RX_VALID (1 << 15)
# define UDC_EPN_RX_DB (1 << 14)
/* buffer size in bits 13, 12 */
# define UDC_EPN_RX_ISO (1 << 11)
/* buffer pointer in low 11 bits */
-#define UDC_EP_TX_REG(endpoint) UDC_REG(0xc0 + (endpoint)*4)
- /* same bitfields as in RX_REG */
+#define UDC_EP_TX(endpoint) (UDC_BASE + 0xc0 + (endpoint)*4)
+ /* same bitfields as in RX */
/*-------------------------------------------------------------------------*/
@@ -195,14 +194,14 @@ struct omap_udc {
/*-------------------------------------------------------------------------*/
-#define MOD_CONF_CTRL_0_REG __REG32(MOD_CONF_CTRL_0)
-#define VBUS_W2FC_1510 (1 << 17) /* 0 gpio0, 1 dvdd2 pin */
+/* MOD_CONF_CTRL_0 */
+#define VBUS_W2FC_1510 (1 << 17) /* 0 gpio0, 1 dvdd2 pin */
-#define FUNC_MUX_CTRL_0_REG __REG32(FUNC_MUX_CTRL_0)
+/* FUNC_MUX_CTRL_0 */
#define VBUS_CTRL_1510 (1 << 19) /* 1 connected (software) */
#define VBUS_MODE_1510 (1 << 18) /* 0 hardware, 1 software */
-#define HMC_1510 ((MOD_CONF_CTRL_0_REG >> 1) & 0x3f)
-#define HMC_1610 (OTG_SYSCON_2_REG & 0x3f)
+#define HMC_1510 ((omap_readl(MOD_CONF_CTRL_0) >> 1) & 0x3f)
+#define HMC_1610 (omap_readl(OTG_SYSCON_2) & 0x3f)
#define HMC (cpu_is_omap15xx() ? HMC_1510 : HMC_1610)
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 08f699b1fc57..031dceb93023 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -1,5 +1,4 @@
/*
- * linux/drivers/usb/gadget/pxa2xx_udc.c
* Intel PXA25x and IXP4xx on-chip full speed USB device controllers
*
* Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker)
@@ -46,19 +45,25 @@
#include <linux/err.h>
#include <linux/seq_file.h>
#include <linux/debugfs.h>
+#include <linux/io.h>
#include <asm/byteorder.h>
#include <asm/dma.h>
#include <asm/gpio.h>
-#include <asm/io.h>
#include <asm/system.h>
#include <asm/mach-types.h>
#include <asm/unaligned.h>
-#include <asm/hardware.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+/*
+ * This driver is PXA25x only. Grab the right register definitions.
+ */
+#ifdef CONFIG_ARCH_PXA
+#include <asm/arch/pxa25x-udc.h>
+#endif
+
#include <asm/mach/udc_pxa2xx.h>
@@ -91,7 +96,7 @@
#define DRIVER_DESC "PXA 25x USB Device Controller driver"
-static const char driver_name [] = "pxa2xx_udc";
+static const char driver_name [] = "pxa25x_udc";
static const char ep0name [] = "ep0";
@@ -111,10 +116,10 @@ static const char ep0name [] = "ep0";
#endif
-#include "pxa2xx_udc.h"
+#include "pxa25x_udc.h"
-#ifdef CONFIG_USB_PXA2XX_SMALL
+#ifdef CONFIG_USB_PXA25X_SMALL
#define SIZE_STR " (small)"
#else
#define SIZE_STR ""
@@ -126,8 +131,8 @@ static const char ep0name [] = "ep0";
* ---------------------------------------------------------------------------
*/
-static void pxa2xx_ep_fifo_flush (struct usb_ep *ep);
-static void nuke (struct pxa2xx_ep *, int status);
+static void pxa25x_ep_fifo_flush (struct usb_ep *ep);
+static void nuke (struct pxa25x_ep *, int status);
/* one GPIO should be used to detect VBUS from the host */
static int is_vbus_present(void)
@@ -212,24 +217,24 @@ static inline void udc_ack_int_UDCCR(int mask)
/*
* endpoint enable/disable
*
- * we need to verify the descriptors used to enable endpoints. since pxa2xx
+ * we need to verify the descriptors used to enable endpoints. since pxa25x
* endpoint configurations are fixed, and are pretty much always enabled,
* there's not a lot to manage here.
*
- * because pxa2xx can't selectively initialize bulk (or interrupt) endpoints,
+ * because pxa25x can't selectively initialize bulk (or interrupt) endpoints,
* (resetting endpoint halt and toggle), SET_INTERFACE is unusable except
* for a single interface (with only the default altsetting) and for gadget
* drivers that don't halt endpoints (not reset by set_interface). that also
* means that if you use ISO, you must violate the USB spec rule that all
* iso endpoints must be in non-default altsettings.
*/
-static int pxa2xx_ep_enable (struct usb_ep *_ep,
+static int pxa25x_ep_enable (struct usb_ep *_ep,
const struct usb_endpoint_descriptor *desc)
{
- struct pxa2xx_ep *ep;
- struct pxa2xx_udc *dev;
+ struct pxa25x_ep *ep;
+ struct pxa25x_udc *dev;
- ep = container_of (_ep, struct pxa2xx_ep, ep);
+ ep = container_of (_ep, struct pxa25x_ep, ep);
if (!_ep || !desc || ep->desc || _ep->name == ep0name
|| desc->bDescriptorType != USB_DT_ENDPOINT
|| ep->bEndpointAddress != desc->bEndpointAddress
@@ -268,7 +273,7 @@ static int pxa2xx_ep_enable (struct usb_ep *_ep,
ep->ep.maxpacket = le16_to_cpu (desc->wMaxPacketSize);
/* flush fifo (mostly for OUT buffers) */
- pxa2xx_ep_fifo_flush (_ep);
+ pxa25x_ep_fifo_flush (_ep);
/* ... reset halt state too, if we could ... */
@@ -276,12 +281,12 @@ static int pxa2xx_ep_enable (struct usb_ep *_ep,
return 0;
}
-static int pxa2xx_ep_disable (struct usb_ep *_ep)
+static int pxa25x_ep_disable (struct usb_ep *_ep)
{
- struct pxa2xx_ep *ep;
+ struct pxa25x_ep *ep;
unsigned long flags;
- ep = container_of (_ep, struct pxa2xx_ep, ep);
+ ep = container_of (_ep, struct pxa25x_ep, ep);
if (!_ep || !ep->desc) {
DMSG("%s, %s not enabled\n", __func__,
_ep ? ep->ep.name : NULL);
@@ -292,7 +297,7 @@ static int pxa2xx_ep_disable (struct usb_ep *_ep)
nuke (ep, -ESHUTDOWN);
/* flush fifo (mostly for IN buffers) */
- pxa2xx_ep_fifo_flush (_ep);
+ pxa25x_ep_fifo_flush (_ep);
ep->desc = NULL;
ep->stopped = 1;
@@ -304,18 +309,18 @@ static int pxa2xx_ep_disable (struct usb_ep *_ep)
/*-------------------------------------------------------------------------*/
-/* for the pxa2xx, these can just wrap kmalloc/kfree. gadget drivers
+/* for the pxa25x, these can just wrap kmalloc/kfree. gadget drivers
* must still pass correctly initialized endpoints, since other controller
* drivers may care about how it's currently set up (dma issues etc).
*/
/*
- * pxa2xx_ep_alloc_request - allocate a request data structure
+ * pxa25x_ep_alloc_request - allocate a request data structure
*/
static struct usb_request *
-pxa2xx_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
+pxa25x_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
{
- struct pxa2xx_request *req;
+ struct pxa25x_request *req;
req = kzalloc(sizeof(*req), gfp_flags);
if (!req)
@@ -327,14 +332,14 @@ pxa2xx_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
/*
- * pxa2xx_ep_free_request - deallocate a request data structure
+ * pxa25x_ep_free_request - deallocate a request data structure
*/
static void
-pxa2xx_ep_free_request (struct usb_ep *_ep, struct usb_request *_req)
+pxa25x_ep_free_request (struct usb_ep *_ep, struct usb_request *_req)
{
- struct pxa2xx_request *req;
+ struct pxa25x_request *req;
- req = container_of (_req, struct pxa2xx_request, req);
+ req = container_of (_req, struct pxa25x_request, req);
WARN_ON (!list_empty (&req->queue));
kfree(req);
}
@@ -344,7 +349,7 @@ pxa2xx_ep_free_request (struct usb_ep *_ep, struct usb_request *_req)
/*
* done - retire a request; caller blocked irqs
*/
-static void done(struct pxa2xx_ep *ep, struct pxa2xx_request *req, int status)
+static void done(struct pxa25x_ep *ep, struct pxa25x_request *req, int status)
{
unsigned stopped = ep->stopped;
@@ -367,13 +372,13 @@ static void done(struct pxa2xx_ep *ep, struct pxa2xx_request *req, int status)
}
-static inline void ep0_idle (struct pxa2xx_udc *dev)
+static inline void ep0_idle (struct pxa25x_udc *dev)
{
dev->ep0state = EP0_IDLE;
}
static int
-write_packet(volatile u32 *uddr, struct pxa2xx_request *req, unsigned max)
+write_packet(volatile u32 *uddr, struct pxa25x_request *req, unsigned max)
{
u8 *buf;
unsigned length, count;
@@ -398,7 +403,7 @@ write_packet(volatile u32 *uddr, struct pxa2xx_request *req, unsigned max)
* caller guarantees at least one packet buffer is ready (or a zlp).
*/
static int
-write_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
+write_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
{
unsigned max;
@@ -455,7 +460,7 @@ write_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
* ep0 data stage. these chips want very simple state transitions.
*/
static inline
-void ep0start(struct pxa2xx_udc *dev, u32 flags, const char *tag)
+void ep0start(struct pxa25x_udc *dev, u32 flags, const char *tag)
{
UDCCS0 = flags|UDCCS0_SA|UDCCS0_OPR;
USIR0 = USIR0_IR0;
@@ -465,7 +470,7 @@ void ep0start(struct pxa2xx_udc *dev, u32 flags, const char *tag)
}
static int
-write_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
+write_ep0_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
{
unsigned count;
int is_short;
@@ -525,7 +530,7 @@ write_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
* request buffer having filled (and maybe overran till end-of-packet).
*/
static int
-read_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
+read_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
{
for (;;) {
u32 udccs;
@@ -602,7 +607,7 @@ read_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
* protocols do use them.
*/
static int
-read_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
+read_ep0_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
{
u8 *buf, byte;
unsigned bufferspace;
@@ -641,21 +646,21 @@ read_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
/*-------------------------------------------------------------------------*/
static int
-pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
{
- struct pxa2xx_request *req;
- struct pxa2xx_ep *ep;
- struct pxa2xx_udc *dev;
+ struct pxa25x_request *req;
+ struct pxa25x_ep *ep;
+ struct pxa25x_udc *dev;
unsigned long flags;
- req = container_of(_req, struct pxa2xx_request, req);
+ req = container_of(_req, struct pxa25x_request, req);
if (unlikely (!_req || !_req->complete || !_req->buf
|| !list_empty(&req->queue))) {
DMSG("%s, bad params\n", __func__);
return -EINVAL;
}
- ep = container_of(_ep, struct pxa2xx_ep, ep);
+ ep = container_of(_ep, struct pxa25x_ep, ep);
if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) {
DMSG("%s, bad ep\n", __func__);
return -EINVAL;
@@ -751,14 +756,14 @@ pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
/*
* nuke - dequeue ALL requests
*/
-static void nuke(struct pxa2xx_ep *ep, int status)
+static void nuke(struct pxa25x_ep *ep, int status)
{
- struct pxa2xx_request *req;
+ struct pxa25x_request *req;
/* called with irqs blocked */
while (!list_empty(&ep->queue)) {
req = list_entry(ep->queue.next,
- struct pxa2xx_request,
+ struct pxa25x_request,
queue);
done(ep, req, status);
}
@@ -768,13 +773,13 @@ static void nuke(struct pxa2xx_ep *ep, int status)
/* dequeue JUST ONE request */
-static int pxa2xx_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+static int pxa25x_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
{
- struct pxa2xx_ep *ep;
- struct pxa2xx_request *req;
+ struct pxa25x_ep *ep;
+ struct pxa25x_request *req;
unsigned long flags;
- ep = container_of(_ep, struct pxa2xx_ep, ep);
+ ep = container_of(_ep, struct pxa25x_ep, ep);
if (!_ep || ep->ep.name == ep0name)
return -EINVAL;
@@ -798,12 +803,12 @@ static int pxa2xx_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
/*-------------------------------------------------------------------------*/
-static int pxa2xx_ep_set_halt(struct usb_ep *_ep, int value)
+static int pxa25x_ep_set_halt(struct usb_ep *_ep, int value)
{
- struct pxa2xx_ep *ep;
+ struct pxa25x_ep *ep;
unsigned long flags;
- ep = container_of(_ep, struct pxa2xx_ep, ep);
+ ep = container_of(_ep, struct pxa25x_ep, ep);
if (unlikely (!_ep
|| (!ep->desc && ep->ep.name != ep0name))
|| ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
@@ -853,11 +858,11 @@ static int pxa2xx_ep_set_halt(struct usb_ep *_ep, int value)
return 0;
}
-static int pxa2xx_ep_fifo_status(struct usb_ep *_ep)
+static int pxa25x_ep_fifo_status(struct usb_ep *_ep)
{
- struct pxa2xx_ep *ep;
+ struct pxa25x_ep *ep;
- ep = container_of(_ep, struct pxa2xx_ep, ep);
+ ep = container_of(_ep, struct pxa25x_ep, ep);
if (!_ep) {
DMSG("%s, bad ep\n", __func__);
return -ENODEV;
@@ -872,11 +877,11 @@ static int pxa2xx_ep_fifo_status(struct usb_ep *_ep)
return (*ep->reg_ubcr & 0xfff) + 1;
}
-static void pxa2xx_ep_fifo_flush(struct usb_ep *_ep)
+static void pxa25x_ep_fifo_flush(struct usb_ep *_ep)
{
- struct pxa2xx_ep *ep;
+ struct pxa25x_ep *ep;
- ep = container_of(_ep, struct pxa2xx_ep, ep);
+ ep = container_of(_ep, struct pxa25x_ep, ep);
if (!_ep || ep->ep.name == ep0name || !list_empty(&ep->queue)) {
DMSG("%s, bad ep\n", __func__);
return;
@@ -898,19 +903,19 @@ static void pxa2xx_ep_fifo_flush(struct usb_ep *_ep)
}
-static struct usb_ep_ops pxa2xx_ep_ops = {
- .enable = pxa2xx_ep_enable,
- .disable = pxa2xx_ep_disable,
+static struct usb_ep_ops pxa25x_ep_ops = {
+ .enable = pxa25x_ep_enable,
+ .disable = pxa25x_ep_disable,
- .alloc_request = pxa2xx_ep_alloc_request,
- .free_request = pxa2xx_ep_free_request,
+ .alloc_request = pxa25x_ep_alloc_request,
+ .free_request = pxa25x_ep_free_request,
- .queue = pxa2xx_ep_queue,
- .dequeue = pxa2xx_ep_dequeue,
+ .queue = pxa25x_ep_queue,
+ .dequeue = pxa25x_ep_dequeue,
- .set_halt = pxa2xx_ep_set_halt,
- .fifo_status = pxa2xx_ep_fifo_status,
- .fifo_flush = pxa2xx_ep_fifo_flush,
+ .set_halt = pxa25x_ep_set_halt,
+ .fifo_status = pxa25x_ep_fifo_status,
+ .fifo_flush = pxa25x_ep_fifo_flush,
};
@@ -919,12 +924,12 @@ static struct usb_ep_ops pxa2xx_ep_ops = {
* ---------------------------------------------------------------------------
*/
-static int pxa2xx_udc_get_frame(struct usb_gadget *_gadget)
+static int pxa25x_udc_get_frame(struct usb_gadget *_gadget)
{
return ((UFNRH & 0x07) << 8) | (UFNRL & 0xff);
}
-static int pxa2xx_udc_wakeup(struct usb_gadget *_gadget)
+static int pxa25x_udc_wakeup(struct usb_gadget *_gadget)
{
/* host may not have enabled remote wakeup */
if ((UDCCS0 & UDCCS0_DRWF) == 0)
@@ -933,14 +938,14 @@ static int pxa2xx_udc_wakeup(struct usb_gadget *_gadget)
return 0;
}
-static void stop_activity(struct pxa2xx_udc *, struct usb_gadget_driver *);
-static void udc_enable (struct pxa2xx_udc *);
-static void udc_disable(struct pxa2xx_udc *);
+static void stop_activity(struct pxa25x_udc *, struct usb_gadget_driver *);
+static void udc_enable (struct pxa25x_udc *);
+static void udc_disable(struct pxa25x_udc *);
/* We disable the UDC -- and its 48 MHz clock -- whenever it's not
* in active use.
*/
-static int pullup(struct pxa2xx_udc *udc)
+static int pullup(struct pxa25x_udc *udc)
{
int is_active = udc->vbus && udc->pullup && !udc->suspended;
DMSG("%s\n", is_active ? "active" : "inactive");
@@ -970,11 +975,11 @@ static int pullup(struct pxa2xx_udc *udc)
}
/* VBUS reporting logically comes from a transceiver */
-static int pxa2xx_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
+static int pxa25x_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
{
- struct pxa2xx_udc *udc;
+ struct pxa25x_udc *udc;
- udc = container_of(_gadget, struct pxa2xx_udc, gadget);
+ udc = container_of(_gadget, struct pxa25x_udc, gadget);
udc->vbus = (is_active != 0);
DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
pullup(udc);
@@ -982,11 +987,11 @@ static int pxa2xx_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
}
/* drivers may have software control over D+ pullup */
-static int pxa2xx_udc_pullup(struct usb_gadget *_gadget, int is_active)
+static int pxa25x_udc_pullup(struct usb_gadget *_gadget, int is_active)
{
- struct pxa2xx_udc *udc;
+ struct pxa25x_udc *udc;
- udc = container_of(_gadget, struct pxa2xx_udc, gadget);
+ udc = container_of(_gadget, struct pxa25x_udc, gadget);
/* not all boards support pullup control */
if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
@@ -997,11 +1002,11 @@ static int pxa2xx_udc_pullup(struct usb_gadget *_gadget, int is_active)
return 0;
}
-static const struct usb_gadget_ops pxa2xx_udc_ops = {
- .get_frame = pxa2xx_udc_get_frame,
- .wakeup = pxa2xx_udc_wakeup,
- .vbus_session = pxa2xx_udc_vbus_session,
- .pullup = pxa2xx_udc_pullup,
+static const struct usb_gadget_ops pxa25x_udc_ops = {
+ .get_frame = pxa25x_udc_get_frame,
+ .wakeup = pxa25x_udc_wakeup,
+ .vbus_session = pxa25x_udc_vbus_session,
+ .pullup = pxa25x_udc_pullup,
// .vbus_draw ... boards may consume current from VBUS, up to
// 100-500mA based on config. the 500uA suspend ceiling means
@@ -1015,7 +1020,7 @@ static const struct usb_gadget_ops pxa2xx_udc_ops = {
static int
udc_seq_show(struct seq_file *m, void *_d)
{
- struct pxa2xx_udc *dev = m->private;
+ struct pxa25x_udc *dev = m->private;
unsigned long flags;
int i;
u32 tmp;
@@ -1076,8 +1081,8 @@ udc_seq_show(struct seq_file *m, void *_d)
/* dump endpoint queues */
for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
- struct pxa2xx_ep *ep = &dev->ep [i];
- struct pxa2xx_request *req;
+ struct pxa25x_ep *ep = &dev->ep [i];
+ struct pxa25x_request *req;
if (i != 0) {
const struct usb_endpoint_descriptor *desc;
@@ -1150,7 +1155,7 @@ static const struct file_operations debug_fops = {
/*
* udc_disable - disable USB device controller
*/
-static void udc_disable(struct pxa2xx_udc *dev)
+static void udc_disable(struct pxa25x_udc *dev)
{
/* block all irqs */
udc_set_mask_UDCCR(UDCCR_SRM|UDCCR_REM);
@@ -1170,7 +1175,7 @@ static void udc_disable(struct pxa2xx_udc *dev)
/*
* udc_reinit - initialize software state
*/
-static void udc_reinit(struct pxa2xx_udc *dev)
+static void udc_reinit(struct pxa25x_udc *dev)
{
u32 i;
@@ -1181,7 +1186,7 @@ static void udc_reinit(struct pxa2xx_udc *dev)
/* basic endpoint records init */
for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
- struct pxa2xx_ep *ep = &dev->ep[i];
+ struct pxa25x_ep *ep = &dev->ep[i];
if (i != 0)
list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list);
@@ -1198,7 +1203,7 @@ static void udc_reinit(struct pxa2xx_udc *dev)
/* until it's enabled, this UDC should be completely invisible
* to any USB host.
*/
-static void udc_enable (struct pxa2xx_udc *dev)
+static void udc_enable (struct pxa25x_udc *dev)
{
udc_clear_mask_UDCCR(UDCCR_UDE);
@@ -1254,7 +1259,7 @@ static void udc_enable (struct pxa2xx_udc *dev)
*/
int usb_gadget_register_driver(struct usb_gadget_driver *driver)
{
- struct pxa2xx_udc *dev = the_controller;
+ struct pxa25x_udc *dev = the_controller;
int retval;
if (!driver
@@ -1299,7 +1304,7 @@ fail:
EXPORT_SYMBOL(usb_gadget_register_driver);
static void
-stop_activity(struct pxa2xx_udc *dev, struct usb_gadget_driver *driver)
+stop_activity(struct pxa25x_udc *dev, struct usb_gadget_driver *driver)
{
int i;
@@ -1310,7 +1315,7 @@ stop_activity(struct pxa2xx_udc *dev, struct usb_gadget_driver *driver)
/* prevent new request submissions, kill any outstanding requests */
for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
- struct pxa2xx_ep *ep = &dev->ep[i];
+ struct pxa25x_ep *ep = &dev->ep[i];
ep->stopped = 1;
nuke(ep, -ESHUTDOWN);
@@ -1327,7 +1332,7 @@ stop_activity(struct pxa2xx_udc *dev, struct usb_gadget_driver *driver)
int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
{
- struct pxa2xx_udc *dev = the_controller;
+ struct pxa25x_udc *dev = the_controller;
if (!dev)
return -ENODEV;
@@ -1364,7 +1369,7 @@ EXPORT_SYMBOL(usb_gadget_unregister_driver);
static irqreturn_t
lubbock_vbus_irq(int irq, void *_dev)
{
- struct pxa2xx_udc *dev = _dev;
+ struct pxa25x_udc *dev = _dev;
int vbus;
dev->stats.irqs++;
@@ -1383,7 +1388,7 @@ lubbock_vbus_irq(int irq, void *_dev)
return IRQ_NONE;
}
- pxa2xx_udc_vbus_session(&dev->gadget, vbus);
+ pxa25x_udc_vbus_session(&dev->gadget, vbus);
return IRQ_HANDLED;
}
@@ -1391,20 +1396,20 @@ lubbock_vbus_irq(int irq, void *_dev)
static irqreturn_t udc_vbus_irq(int irq, void *_dev)
{
- struct pxa2xx_udc *dev = _dev;
+ struct pxa25x_udc *dev = _dev;
int vbus = gpio_get_value(dev->mach->gpio_vbus);
if (dev->mach->gpio_vbus_inverted)
vbus = !vbus;
- pxa2xx_udc_vbus_session(&dev->gadget, vbus);
+ pxa25x_udc_vbus_session(&dev->gadget, vbus);
return IRQ_HANDLED;
}
/*-------------------------------------------------------------------------*/
-static inline void clear_ep_state (struct pxa2xx_udc *dev)
+static inline void clear_ep_state (struct pxa25x_udc *dev)
{
unsigned i;
@@ -1417,7 +1422,7 @@ static inline void clear_ep_state (struct pxa2xx_udc *dev)
static void udc_watchdog(unsigned long _dev)
{
- struct pxa2xx_udc *dev = (void *)_dev;
+ struct pxa25x_udc *dev = (void *)_dev;
local_irq_disable();
if (dev->ep0state == EP0_STALL
@@ -1430,11 +1435,11 @@ static void udc_watchdog(unsigned long _dev)
local_irq_enable();
}
-static void handle_ep0 (struct pxa2xx_udc *dev)
+static void handle_ep0 (struct pxa25x_udc *dev)
{
u32 udccs0 = UDCCS0;
- struct pxa2xx_ep *ep = &dev->ep [0];
- struct pxa2xx_request *req;
+ struct pxa25x_ep *ep = &dev->ep [0];
+ struct pxa25x_request *req;
union {
struct usb_ctrlrequest r;
u8 raw [8];
@@ -1444,7 +1449,7 @@ static void handle_ep0 (struct pxa2xx_udc *dev)
if (list_empty(&ep->queue))
req = NULL;
else
- req = list_entry(ep->queue.next, struct pxa2xx_request, queue);
+ req = list_entry(ep->queue.next, struct pxa25x_request, queue);
/* clear stall status */
if (udccs0 & UDCCS0_SST) {
@@ -1654,9 +1659,9 @@ stall:
USIR0 = USIR0_IR0;
}
-static void handle_ep(struct pxa2xx_ep *ep)
+static void handle_ep(struct pxa25x_ep *ep)
{
- struct pxa2xx_request *req;
+ struct pxa25x_request *req;
int is_in = ep->bEndpointAddress & USB_DIR_IN;
int completed;
u32 udccs, tmp;
@@ -1665,7 +1670,7 @@ static void handle_ep(struct pxa2xx_ep *ep)
completed = 0;
if (likely (!list_empty(&ep->queue)))
req = list_entry(ep->queue.next,
- struct pxa2xx_request, queue);
+ struct pxa25x_request, queue);
else
req = NULL;
@@ -1702,16 +1707,16 @@ static void handle_ep(struct pxa2xx_ep *ep)
}
/*
- * pxa2xx_udc_irq - interrupt handler
+ * pxa25x_udc_irq - interrupt handler
*
* avoid delays in ep0 processing. the control handshaking isn't always
* under software control (pxa250c0 and the pxa255 are better), and delays
* could cause usb protocol errors.
*/
static irqreturn_t
-pxa2xx_udc_irq(int irq, void *_dev)
+pxa25x_udc_irq(int irq, void *_dev)
{
- struct pxa2xx_udc *dev = _dev;
+ struct pxa25x_udc *dev = _dev;
int handled;
dev->stats.irqs++;
@@ -1820,9 +1825,9 @@ static void nop_release (struct device *dev)
* doing it at run-time) to save code, eliminate fault paths, and
* be more obviously correct.
*/
-static struct pxa2xx_udc memory = {
+static struct pxa25x_udc memory = {
.gadget = {
- .ops = &pxa2xx_udc_ops,
+ .ops = &pxa25x_udc_ops,
.ep0 = &memory.ep[0].ep,
.name = driver_name,
.dev = {
@@ -1835,7 +1840,7 @@ static struct pxa2xx_udc memory = {
.ep[0] = {
.ep = {
.name = ep0name,
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = EP0_FIFO_SIZE,
},
.dev = &memory,
@@ -1847,7 +1852,7 @@ static struct pxa2xx_udc memory = {
.ep[1] = {
.ep = {
.name = "ep1in-bulk",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = BULK_FIFO_SIZE,
},
.dev = &memory,
@@ -1860,7 +1865,7 @@ static struct pxa2xx_udc memory = {
.ep[2] = {
.ep = {
.name = "ep2out-bulk",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = BULK_FIFO_SIZE,
},
.dev = &memory,
@@ -1871,11 +1876,11 @@ static struct pxa2xx_udc memory = {
.reg_ubcr = &UBCR2,
.reg_uddr = &UDDR2,
},
-#ifndef CONFIG_USB_PXA2XX_SMALL
+#ifndef CONFIG_USB_PXA25X_SMALL
.ep[3] = {
.ep = {
.name = "ep3in-iso",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = ISO_FIFO_SIZE,
},
.dev = &memory,
@@ -1888,7 +1893,7 @@ static struct pxa2xx_udc memory = {
.ep[4] = {
.ep = {
.name = "ep4out-iso",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = ISO_FIFO_SIZE,
},
.dev = &memory,
@@ -1902,7 +1907,7 @@ static struct pxa2xx_udc memory = {
.ep[5] = {
.ep = {
.name = "ep5in-int",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = INT_FIFO_SIZE,
},
.dev = &memory,
@@ -1917,7 +1922,7 @@ static struct pxa2xx_udc memory = {
.ep[6] = {
.ep = {
.name = "ep6in-bulk",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = BULK_FIFO_SIZE,
},
.dev = &memory,
@@ -1930,7 +1935,7 @@ static struct pxa2xx_udc memory = {
.ep[7] = {
.ep = {
.name = "ep7out-bulk",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = BULK_FIFO_SIZE,
},
.dev = &memory,
@@ -1944,7 +1949,7 @@ static struct pxa2xx_udc memory = {
.ep[8] = {
.ep = {
.name = "ep8in-iso",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = ISO_FIFO_SIZE,
},
.dev = &memory,
@@ -1957,7 +1962,7 @@ static struct pxa2xx_udc memory = {
.ep[9] = {
.ep = {
.name = "ep9out-iso",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = ISO_FIFO_SIZE,
},
.dev = &memory,
@@ -1971,7 +1976,7 @@ static struct pxa2xx_udc memory = {
.ep[10] = {
.ep = {
.name = "ep10in-int",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = INT_FIFO_SIZE,
},
.dev = &memory,
@@ -1986,7 +1991,7 @@ static struct pxa2xx_udc memory = {
.ep[11] = {
.ep = {
.name = "ep11in-bulk",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = BULK_FIFO_SIZE,
},
.dev = &memory,
@@ -1999,7 +2004,7 @@ static struct pxa2xx_udc memory = {
.ep[12] = {
.ep = {
.name = "ep12out-bulk",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = BULK_FIFO_SIZE,
},
.dev = &memory,
@@ -2013,7 +2018,7 @@ static struct pxa2xx_udc memory = {
.ep[13] = {
.ep = {
.name = "ep13in-iso",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = ISO_FIFO_SIZE,
},
.dev = &memory,
@@ -2026,7 +2031,7 @@ static struct pxa2xx_udc memory = {
.ep[14] = {
.ep = {
.name = "ep14out-iso",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = ISO_FIFO_SIZE,
},
.dev = &memory,
@@ -2040,7 +2045,7 @@ static struct pxa2xx_udc memory = {
.ep[15] = {
.ep = {
.name = "ep15in-int",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = INT_FIFO_SIZE,
},
.dev = &memory,
@@ -2050,7 +2055,7 @@ static struct pxa2xx_udc memory = {
.reg_udccs = &UDCCS15,
.reg_uddr = &UDDR15,
},
-#endif /* !CONFIG_USB_PXA2XX_SMALL */
+#endif /* !CONFIG_USB_PXA25X_SMALL */
};
#define CP15R0_VENDOR_MASK 0xffffe000
@@ -2090,9 +2095,9 @@ static struct pxa2xx_udc memory = {
/*
* probe - binds to the platform device
*/
-static int __init pxa2xx_udc_probe(struct platform_device *pdev)
+static int __init pxa25x_udc_probe(struct platform_device *pdev)
{
- struct pxa2xx_udc *dev = &memory;
+ struct pxa25x_udc *dev = &memory;
int retval, vbus_irq, irq;
u32 chiprev;
@@ -2155,7 +2160,7 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
if (dev->mach->gpio_vbus) {
if ((retval = gpio_request(dev->mach->gpio_vbus,
- "pxa2xx_udc GPIO VBUS"))) {
+ "pxa25x_udc GPIO VBUS"))) {
dev_dbg(&pdev->dev,
"can't get vbus gpio %d, err: %d\n",
dev->mach->gpio_vbus, retval);
@@ -2168,7 +2173,7 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
if (dev->mach->gpio_pullup) {
if ((retval = gpio_request(dev->mach->gpio_pullup,
- "pca2xx_udc GPIO PULLUP"))) {
+ "pca25x_udc GPIO PULLUP"))) {
dev_dbg(&pdev->dev,
"can't get pullup gpio %d, err: %d\n",
dev->mach->gpio_pullup, retval);
@@ -2194,7 +2199,7 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
dev->vbus = is_vbus_present();
/* irq setup after old hardware state is cleaned up */
- retval = request_irq(irq, pxa2xx_udc_irq,
+ retval = request_irq(irq, pxa25x_udc_irq,
IRQF_DISABLED, driver_name, dev);
if (retval != 0) {
pr_err("%s: can't get irq %d, err %d\n",
@@ -2260,14 +2265,14 @@ lubbock_fail0:
return retval;
}
-static void pxa2xx_udc_shutdown(struct platform_device *_dev)
+static void pxa25x_udc_shutdown(struct platform_device *_dev)
{
pullup_off();
}
-static int __exit pxa2xx_udc_remove(struct platform_device *pdev)
+static int __exit pxa25x_udc_remove(struct platform_device *pdev)
{
- struct pxa2xx_udc *dev = platform_get_drvdata(pdev);
+ struct pxa25x_udc *dev = platform_get_drvdata(pdev);
if (dev->driver)
return -EBUSY;
@@ -2317,9 +2322,9 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev)
* VBUS IRQs should probably be ignored so that the PXA device just acts
* "dead" to USB hosts until system resume.
*/
-static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state)
+static int pxa25x_udc_suspend(struct platform_device *dev, pm_message_t state)
{
- struct pxa2xx_udc *udc = platform_get_drvdata(dev);
+ struct pxa25x_udc *udc = platform_get_drvdata(dev);
unsigned long flags;
if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
@@ -2333,9 +2338,9 @@ static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state)
return 0;
}
-static int pxa2xx_udc_resume(struct platform_device *dev)
+static int pxa25x_udc_resume(struct platform_device *dev)
{
- struct pxa2xx_udc *udc = platform_get_drvdata(dev);
+ struct pxa25x_udc *udc = platform_get_drvdata(dev);
unsigned long flags;
udc->suspended = 0;
@@ -2347,27 +2352,27 @@ static int pxa2xx_udc_resume(struct platform_device *dev)
}
#else
-#define pxa2xx_udc_suspend NULL
-#define pxa2xx_udc_resume NULL
+#define pxa25x_udc_suspend NULL
+#define pxa25x_udc_resume NULL
#endif
/*-------------------------------------------------------------------------*/
static struct platform_driver udc_driver = {
- .shutdown = pxa2xx_udc_shutdown,
- .remove = __exit_p(pxa2xx_udc_remove),
- .suspend = pxa2xx_udc_suspend,
- .resume = pxa2xx_udc_resume,
+ .shutdown = pxa25x_udc_shutdown,
+ .remove = __exit_p(pxa25x_udc_remove),
+ .suspend = pxa25x_udc_suspend,
+ .resume = pxa25x_udc_resume,
.driver = {
.owner = THIS_MODULE,
- .name = "pxa2xx-udc",
+ .name = "pxa25x-udc",
},
};
static int __init udc_init(void)
{
pr_info("%s: version %s\n", driver_name, DRIVER_VERSION);
- return platform_driver_probe(&udc_driver, pxa2xx_udc_probe);
+ return platform_driver_probe(&udc_driver, pxa25x_udc_probe);
}
module_init(udc_init);
@@ -2380,4 +2385,4 @@ module_exit(udc_exit);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:pxa2xx-udc");
+MODULE_ALIAS("platform:pxa25x-udc");
diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa25x_udc.h
index e2c19e88c875..4d11ece7c95f 100644
--- a/drivers/usb/gadget/pxa2xx_udc.h
+++ b/drivers/usb/gadget/pxa25x_udc.h
@@ -1,6 +1,5 @@
/*
- * linux/drivers/usb/gadget/pxa2xx_udc.h
- * Intel PXA2xx on-chip full speed USB device controller
+ * Intel PXA25x on-chip full speed USB device controller
*
* Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
* Copyright (C) 2003 David Brownell
@@ -21,14 +20,14 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#ifndef __LINUX_USB_GADGET_PXA2XX_H
-#define __LINUX_USB_GADGET_PXA2XX_H
+#ifndef __LINUX_USB_GADGET_PXA25X_H
+#define __LINUX_USB_GADGET_PXA25X_H
#include <linux/types.h>
/*-------------------------------------------------------------------------*/
-/* pxa2xx has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */
+/* pxa25x has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */
#define UFNRH_SIR (1 << 7) /* SOF interrupt request */
#define UFNRH_SIM (1 << 6) /* SOF interrupt mask */
#define UFNRH_IPE14 (1 << 5) /* ISO packet error, ep14 */
@@ -45,11 +44,11 @@
/*-------------------------------------------------------------------------*/
-struct pxa2xx_udc;
+struct pxa25x_udc;
-struct pxa2xx_ep {
+struct pxa25x_ep {
struct usb_ep ep;
- struct pxa2xx_udc *dev;
+ struct pxa25x_udc *dev;
const struct usb_endpoint_descriptor *desc;
struct list_head queue;
@@ -72,7 +71,7 @@ struct pxa2xx_ep {
volatile u32 *reg_uddr;
};
-struct pxa2xx_request {
+struct pxa25x_request {
struct usb_request req;
struct list_head queue;
};
@@ -98,7 +97,7 @@ struct udc_stats {
unsigned long irqs;
};
-#ifdef CONFIG_USB_PXA2XX_SMALL
+#ifdef CONFIG_USB_PXA25X_SMALL
/* when memory's tight, SMALL config saves code+data. */
#define PXA_UDC_NUM_ENDPOINTS 3
#endif
@@ -107,7 +106,7 @@ struct udc_stats {
#define PXA_UDC_NUM_ENDPOINTS 16
#endif
-struct pxa2xx_udc {
+struct pxa25x_udc {
struct usb_gadget gadget;
struct usb_gadget_driver *driver;
@@ -130,7 +129,7 @@ struct pxa2xx_udc {
struct clk *clk;
struct pxa2xx_udc_mach_info *mach;
u64 dma_mask;
- struct pxa2xx_ep ep [PXA_UDC_NUM_ENDPOINTS];
+ struct pxa25x_ep ep [PXA_UDC_NUM_ENDPOINTS];
#ifdef CONFIG_USB_GADGET_DEBUG_FS
struct dentry *debugfs_udc;
@@ -144,7 +143,7 @@ struct pxa2xx_udc {
/* lubbock can also report usb connect/disconnect irqs */
#endif
-static struct pxa2xx_udc *the_controller;
+static struct pxa25x_udc *the_controller;
/*-------------------------------------------------------------------------*/
@@ -209,7 +208,7 @@ dump_udccs0(const char *label)
}
static void __maybe_unused
-dump_state(struct pxa2xx_udc *dev)
+dump_state(struct pxa25x_udc *dev)
{
u32 tmp;
unsigned i;
@@ -264,4 +263,4 @@ dump_state(struct pxa2xx_udc *dev)
#define INFO(stuff...) pr_info("udc: " stuff)
-#endif /* __LINUX_USB_GADGET_PXA2XX_H */
+#endif /* __LINUX_USB_GADGET_PXA25X_H */
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index e02bfd4df3a6..9c0e82ec5c43 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -38,7 +38,7 @@
#include <linux/usb.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
-
+#include <asm/arch/pxa2xx-regs.h> /* FIXME: for PSSR */
#include <asm/arch/udc.h>
#include "pxa27x_udc.h"
@@ -2360,18 +2360,19 @@ static int pxa_udc_resume(struct platform_device *_dev)
* Software must configure the USB OTG pad, UDC, and UHC
* to the state they were in before entering sleep mode.
*/
- PSSR |= PSSR_OTGPH;
+ if (cpu_is_pxa27x())
+ PSSR |= PSSR_OTGPH;
return 0;
}
#endif
/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:pxa2xx-udc");
+MODULE_ALIAS("platform:pxa27x-udc");
static struct platform_driver udc_driver = {
.driver = {
- .name = "pxa2xx-udc",
+ .name = "pxa27x-udc",
.owner = THIS_MODULE,
},
.remove = __exit_p(pxa_udc_remove),
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index 97453db924ff..1d1b7936ee11 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -484,12 +484,4 @@ static inline struct pxa_udc *to_gadget_udc(struct usb_gadget *gadget)
#define ep_warn(ep, fmt, arg...) \
dev_warn(ep->dev->dev, "%s:%s:" fmt, EPNAME(ep), __func__, ## arg)
-/*
- * Cannot include pxa-regs.h, as register names are similar.
- * So PSSR is redefined here. This should be removed once UDC registers will
- * be gone from pxa-regs.h.
- */
-#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status */
-#define PSSR_OTGPH (1 << 6) /* OTG Peripheral Hold */
-
#endif /* __LINUX_USB_GADGET_PXA27X_H */
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 3a7c24c03671..a19a4f80a6e1 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -169,13 +169,16 @@ static void start_hnp(struct ohci_hcd *ohci)
{
const unsigned port = ohci_to_hcd(ohci)->self.otg_port - 1;
unsigned long flags;
+ u32 l;
otg_start_hnp(ohci->transceiver);
local_irq_save(flags);
ohci->transceiver->state = OTG_STATE_A_SUSPEND;
writel (RH_PS_PSS, &ohci->regs->roothub.portstatus [port]);
- OTG_CTRL_REG &= ~OTG_A_BUSREQ;
+ l = omap_readl(OTG_CTRL);
+ l &= ~OTG_A_BUSREQ;
+ omap_writel(l, OTG_CTRL);
local_irq_restore(flags);
}
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index d4ee27d92be8..127b15799024 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -27,6 +27,7 @@
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h> /* FIXME: for PSSR */
#include <asm/arch/ohci.h>
#define PXA_UHC_MAX_PORTNUM 3
@@ -104,7 +105,7 @@ static int pxa27x_start_hc(struct device *dev)
UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE);
/* Clear any OTG Pin Hold */
- if (PSSR & PSSR_OTGPH)
+ if (cpu_is_pxa27x() && (PSSR & PSSR_OTGPH))
PSSR |= PSSR_OTGPH;
return 0;
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index dcd8073c2369..30bf7f2f1635 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -112,3 +112,10 @@ config BACKLIGHT_CARILLO_RANCH
help
If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
backlight driver.
+
+config BACKLIGHT_PWM
+ tristate "Generic PWM based Backlight Driver"
+ depends on BACKLIGHT_CLASS_DEVICE && HAVE_PWM
+ help
+ If you have a LCD backlight adjustable by PWM, say Y to enable
+ this driver.
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 33f6c7cecc73..b51a7cd12500 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o
obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
+obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
new file mode 100644
index 000000000000..6338d0e2fe07
--- /dev/null
+++ b/drivers/video/backlight/pwm_bl.c
@@ -0,0 +1,185 @@
+/*
+ * linux/drivers/video/backlight/pwm_bl.c
+ *
+ * simple PWM based backlight control, board code has to setup
+ * 1) pin configuration so PWM waveforms can output
+ * 2) platform_data casts to the PWM id (0/1/2/3 on PXA)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+
+struct pwm_bl_data {
+ struct pwm_device *pwm;
+ unsigned int period;
+ int (*notify)(int brightness);
+};
+
+static int pwm_backlight_update_status(struct backlight_device *bl)
+{
+ struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
+ int brightness = bl->props.brightness;
+ int max = bl->props.max_brightness;
+
+ if (bl->props.power != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ if (pb->notify)
+ brightness = pb->notify(brightness);
+
+ if (brightness == 0) {
+ pwm_config(pb->pwm, 0, pb->period);
+ pwm_disable(pb->pwm);
+ } else {
+ pwm_config(pb->pwm, brightness * pb->period / max, pb->period);
+ pwm_enable(pb->pwm);
+ }
+ return 0;
+}
+
+static int pwm_backlight_get_brightness(struct backlight_device *bl)
+{
+ return bl->props.brightness;
+}
+
+static struct backlight_ops pwm_backlight_ops = {
+ .update_status = pwm_backlight_update_status,
+ .get_brightness = pwm_backlight_get_brightness,
+};
+
+static int pwm_backlight_probe(struct platform_device *pdev)
+{
+ struct platform_pwm_backlight_data *data = pdev->dev.platform_data;
+ struct backlight_device *bl;
+ struct pwm_bl_data *pb;
+ int ret;
+
+ if (!data)
+ return -EINVAL;
+
+ if (data->init) {
+ ret = data->init(&pdev->dev);
+ if (ret < 0)
+ return ret;
+ }
+
+ pb = kzalloc(sizeof(*pb), GFP_KERNEL);
+ if (!pb) {
+ ret = -ENOMEM;
+ goto err_alloc;
+ }
+
+ pb->period = data->pwm_period_ns;
+ pb->notify = data->notify;
+
+ pb->pwm = pwm_request(data->pwm_id, "backlight");
+ if (IS_ERR(pb->pwm)) {
+ dev_err(&pdev->dev, "unable to request PWM for backlight\n");
+ ret = PTR_ERR(pb->pwm);
+ goto err_pwm;
+ }
+
+ bl = backlight_device_register(pdev->name, &pdev->dev,
+ pb, &pwm_backlight_ops);
+ if (IS_ERR(bl)) {
+ dev_err(&pdev->dev, "failed to register backlight\n");
+ ret = PTR_ERR(bl);
+ goto err_bl;
+ }
+
+ bl->props.max_brightness = data->max_brightness;
+ bl->props.brightness = data->dft_brightness;
+ backlight_update_status(bl);
+
+ platform_set_drvdata(pdev, bl);
+ return 0;
+
+err_bl:
+ pwm_free(pb->pwm);
+err_pwm:
+ kfree(pb);
+err_alloc:
+ if (data->exit)
+ data->exit(&pdev->dev);
+ return ret;
+}
+
+static int pwm_backlight_remove(struct platform_device *pdev)
+{
+ struct platform_pwm_backlight_data *data = pdev->dev.platform_data;
+ struct backlight_device *bl = platform_get_drvdata(pdev);
+ struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
+
+ backlight_device_unregister(bl);
+ pwm_config(pb->pwm, 0, pb->period);
+ pwm_disable(pb->pwm);
+ pwm_free(pb->pwm);
+ kfree(pb);
+ if (data->exit)
+ data->exit(&pdev->dev);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int pwm_backlight_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct backlight_device *bl = platform_get_drvdata(pdev);
+ struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
+
+ pwm_config(pb->pwm, 0, pb->period);
+ pwm_disable(pb->pwm);
+ return 0;
+}
+
+static int pwm_backlight_resume(struct platform_device *pdev)
+{
+ struct backlight_device *bl = platform_get_drvdata(pdev);
+
+ backlight_update_status(bl);
+ return 0;
+}
+#else
+#define pwm_backlight_suspend NULL
+#define pwm_backlight_resume NULL
+#endif
+
+static struct platform_driver pwm_backlight_driver = {
+ .driver = {
+ .name = "pwm-backlight",
+ .owner = THIS_MODULE,
+ },
+ .probe = pwm_backlight_probe,
+ .remove = pwm_backlight_remove,
+ .suspend = pwm_backlight_suspend,
+ .resume = pwm_backlight_resume,
+};
+
+static int __init pwm_backlight_init(void)
+{
+ return platform_driver_register(&pwm_backlight_driver);
+}
+module_init(pwm_backlight_init);
+
+static void __exit pwm_backlight_exit(void)
+{
+ platform_driver_unregister(&pwm_backlight_driver);
+}
+module_exit(pwm_backlight_exit);
+
+MODULE_DESCRIPTION("PWM based Backlight Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index fafe7db20d6d..d0746261c957 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1792,11 +1792,49 @@ failed:
return ret;
}
+static int __devexit pxafb_remove(struct platform_device *dev)
+{
+ struct pxafb_info *fbi = platform_get_drvdata(dev);
+ struct resource *r;
+ int irq;
+ struct fb_info *info;
+
+ if (!fbi)
+ return 0;
+
+ info = &fbi->fb;
+
+ unregister_framebuffer(info);
+
+ pxafb_disable_controller(fbi);
+
+ if (fbi->fb.cmap.len)
+ fb_dealloc_cmap(&fbi->fb.cmap);
+
+ irq = platform_get_irq(dev, 0);
+ free_irq(irq, fbi);
+
+ dma_free_writecombine(&dev->dev, fbi->map_size,
+ fbi->map_cpu, fbi->map_dma);
+
+ iounmap(fbi->mmio_base);
+
+ r = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ release_mem_region(r->start, r->end - r->start + 1);
+
+ clk_put(fbi->clk);
+ kfree(fbi);
+
+ return 0;
+}
+
static struct platform_driver pxafb_driver = {
.probe = pxafb_probe,
+ .remove = pxafb_remove,
.suspend = pxafb_suspend,
.resume = pxafb_resume,
.driver = {
+ .owner = THIS_MODULE,
.name = "pxa2xx-fb",
},
};
@@ -1809,7 +1847,13 @@ static int __init pxafb_init(void)
return platform_driver_register(&pxafb_driver);
}
+static void __exit pxafb_exit(void)
+{
+ platform_driver_unregister(&pxafb_driver);
+}
+
module_init(pxafb_init);
+module_exit(pxafb_exit);
MODULE_DESCRIPTION("loadable framebuffer driver for PXA");
MODULE_LICENSE("GPL");
diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h
index c2b13c280155..2001e81f2267 100644
--- a/include/asm-arm/arch-at91/at91_pmc.h
+++ b/include/asm-arm/arch-at91/at91_pmc.h
@@ -39,10 +39,14 @@
#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */
+#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */
+#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */
+#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */
+#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */
#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
-#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */
+#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */
#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */
@@ -97,6 +101,7 @@
#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
+#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */
#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
diff --git a/include/asm-arm/arch-at91/at91cap9.h b/include/asm-arm/arch-at91/at91cap9.h
index bac83adb5050..6f14d9053ac7 100644
--- a/include/asm-arm/arch-at91/at91cap9.h
+++ b/include/asm-arm/arch-at91/at91cap9.h
@@ -118,7 +118,7 @@
#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */
#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */
-#define AT91CAP9_UDPHS_BASE 0x00600000 /* USB High Speed Device Port */
+#define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */
#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */
#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6
diff --git a/include/asm-arm/arch-at91/at91cap9_matrix.h b/include/asm-arm/arch-at91/at91cap9_matrix.h
index a641686b6c3d..ddbd4873c842 100644
--- a/include/asm-arm/arch-at91/at91cap9_matrix.h
+++ b/include/asm-arm/arch-at91/at91cap9_matrix.h
@@ -106,6 +106,11 @@
#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */
#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */
+#define AT91_MATRIX_UDPHS (AT91_MATRIX + 0x118) /* USBHS Special Function Register [AT91CAP9 only] */
+#define AT91_MATRIX_SELECT_UDPHS (0 << 31) /* select High Speed UDP */
+#define AT91_MATRIX_SELECT_UDP (1 << 31) /* select standard UDP */
+#define AT91_MATRIX_UDPHS_BYPASS_LOCK (1 << 30) /* bypass lock bit */
+
#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
diff --git a/include/asm-arm/arch-at91/at91sam9260.h b/include/asm-arm/arch-at91/at91sam9260.h
index c8934fe34dc5..889872a3f2a9 100644
--- a/include/asm-arm/arch-at91/at91sam9260.h
+++ b/include/asm-arm/arch-at91/at91sam9260.h
@@ -6,6 +6,8 @@
* Common definitions.
* Based on AT91SAM9260 datasheet revision A (Preliminary).
*
+ * Includes also definitions for AT91SAM9XE and AT91SAM9G families
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -123,5 +125,14 @@
#define AT91SAM9XE_FLASH_BASE 0x00200000 /* Internal FLASH base address */
#define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define AT91SAM9G20_ROM_BASE 0x00100000 /* Internal ROM base address */
+#define AT91SAM9G20_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
+
+#define AT91SAM9G20_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */
+#define AT91SAM9G20_SRAM0_SIZE SZ_16K /* Internal SRAM 0 size (16Kb) */
+#define AT91SAM9G20_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */
+#define AT91SAM9G20_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */
+
+#define AT91SAM9G20_UHP_BASE 0x00500000 /* USB Host controller */
#endif
diff --git a/include/asm-arm/arch-at91/at91sam9rl.h b/include/asm-arm/arch-at91/at91sam9rl.h
index 16d2832f6c0a..622e56f81d42 100644
--- a/include/asm-arm/arch-at91/at91sam9rl.h
+++ b/include/asm-arm/arch-at91/at91sam9rl.h
@@ -110,6 +110,6 @@
#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */
#define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */
-#define AT91SAM9RL_UDPHS_BASE 0x00600000 /* USB Device HS controller */
+#define AT91SAM9RL_UDPHS_FIFO 0x00600000 /* USB Device HS controller */
#endif
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
index dc189f01c5b3..94de788da76e 100644
--- a/include/asm-arm/arch-at91/board.h
+++ b/include/asm-arm/arch-at91/board.h
@@ -36,6 +36,7 @@
#include <linux/i2c.h>
#include <linux/leds.h>
#include <linux/spi/spi.h>
+#include <linux/usb/atmel_usba_udc.h>
/* USB Device */
struct at91_udc_data {
@@ -45,6 +46,9 @@ struct at91_udc_data {
};
extern void __init at91_add_device_udc(struct at91_udc_data *data);
+ /* USB High Speed Device */
+extern void __init at91_add_device_usba(struct usba_platform_data *data);
+
/* Compact Flash */
struct at91_cf_data {
u8 irq_pin; /* I/O IRQ */
@@ -73,7 +77,7 @@ struct at91_eth_data {
};
extern void __init at91_add_device_eth(struct at91_eth_data *data);
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9)
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9)
#define eth_platform_data at91_eth_data
#endif
diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h
index 7145166826a2..52df794205cb 100644
--- a/include/asm-arm/arch-at91/cpu.h
+++ b/include/asm-arm/arch-at91/cpu.h
@@ -21,6 +21,7 @@
#define ARCH_ID_AT91SAM9260 0x019803a0
#define ARCH_ID_AT91SAM9261 0x019703a0
#define ARCH_ID_AT91SAM9263 0x019607a0
+#define ARCH_ID_AT91SAM9G20 0x019905a0
#define ARCH_ID_AT91SAM9RL64 0x019b03a0
#define ARCH_ID_AT91CAP9 0x039A03A0
@@ -63,6 +64,12 @@ static inline unsigned long at91_arch_identify(void)
#define cpu_is_at91sam9260() (0)
#endif
+#ifdef CONFIG_ARCH_AT91SAM9G20
+#define cpu_is_at91sam9g20() (at91_cpu_identify() == ARCH_ID_AT91SAM9G20)
+#else
+#define cpu_is_at91sam9g20() (0)
+#endif
+
#ifdef CONFIG_ARCH_AT91SAM9261
#define cpu_is_at91sam9261() (at91_cpu_identify() == ARCH_ID_AT91SAM9261)
#else
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
index 2c826d8247a3..016a3a3f6633 100644
--- a/include/asm-arm/arch-at91/hardware.h
+++ b/include/asm-arm/arch-at91/hardware.h
@@ -18,7 +18,7 @@
#if defined(CONFIG_ARCH_AT91RM9200)
#include <asm/arch/at91rm9200.h>
-#elif defined(CONFIG_ARCH_AT91SAM9260)
+#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
#include <asm/arch/at91sam9260.h>
#elif defined(CONFIG_ARCH_AT91SAM9261)
#include <asm/arch/at91sam9261.h>
diff --git a/include/asm-arm/arch-at91/timex.h b/include/asm-arm/arch-at91/timex.h
index f1933b0fa43f..298d8313cdac 100644
--- a/include/asm-arm/arch-at91/timex.h
+++ b/include/asm-arm/arch-at91/timex.h
@@ -27,14 +27,29 @@
#define CLOCK_TICK_RATE (AT91_SLOW_CLOCK)
-#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9261)
+#elif defined(CONFIG_ARCH_AT91SAM9260)
+
+#if defined(CONFIG_MACH_USB_A9260) || defined(CONFIG_MACH_QIL_A9260)
+#define AT91SAM9_MASTER_CLOCK 90000000
+#else
+#define AT91SAM9_MASTER_CLOCK 99300000
+#endif
+
+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91SAM9261)
#define AT91SAM9_MASTER_CLOCK 99300000
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
#elif defined(CONFIG_ARCH_AT91SAM9263)
+#if defined(CONFIG_MACH_USB_A9263)
+#define AT91SAM9_MASTER_CLOCK 90000000
+#else
#define AT91SAM9_MASTER_CLOCK 99959500
+#endif
+
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
#elif defined(CONFIG_ARCH_AT91SAM9RL)
@@ -42,6 +57,11 @@
#define AT91SAM9_MASTER_CLOCK 100000000
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+#elif defined(CONFIG_ARCH_AT91SAM9G20)
+
+#define AT91SAM9_MASTER_CLOCK 132096000
+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
#elif defined(CONFIG_ARCH_AT91CAP9)
#define AT91CAP9_MASTER_CLOCK 100000000
diff --git a/include/asm-arm/arch-ebsa285/hardware.h b/include/asm-arm/arch-ebsa285/hardware.h
index daad8ee2d194..74610c2c63d4 100644
--- a/include/asm-arm/arch-ebsa285/hardware.h
+++ b/include/asm-arm/arch-ebsa285/hardware.h
@@ -14,7 +14,6 @@
#include <asm/arch/memory.h>
-#ifdef CONFIG_ARCH_FOOTBRIDGE
/* Virtual Physical Size
* 0xff800000 0x40000000 1MB X-Bus
* 0xff000000 0x7c000000 1MB PCI I/O space
@@ -50,31 +49,6 @@
#define PCIMEM_SIZE 0x01000000
#define PCIMEM_BASE 0xf0000000
-#elif defined(CONFIG_ARCH_CO285)
-/*
- * This is the COEBSA285 cut-down mapping
- */
-#define PCIMEM_SIZE 0x80000000
-#define PCIMEM_BASE 0x80000000
-
-#define WFLUSH_SIZE 0x01000000
-#define WFLUSH_BASE 0x7d000000
-
-#define ARMCSR_SIZE 0x00100000
-#define ARMCSR_BASE 0x7cf00000
-
-#define XBUS_SIZE 0x00020000
-#define XBUS_BASE 0x7cee0000
-
-#define PCIO_SIZE 0x00010000
-#define PCIO_BASE 0x7ced0000
-
-#else
-
-#error "Undefined footbridge architecture"
-
-#endif
-
#define XBUS_LEDS ((volatile unsigned char *)(XBUS_BASE + 0x12000))
#define XBUS_LED_AMBER (1 << 0)
#define XBUS_LED_GREEN (1 << 1)
diff --git a/include/asm-arm/arch-ebsa285/memory.h b/include/asm-arm/arch-ebsa285/memory.h
index cbd7ae64bcc9..9019a3bf5ab9 100644
--- a/include/asm-arm/arch-ebsa285/memory.h
+++ b/include/asm-arm/arch-ebsa285/memory.h
@@ -42,8 +42,6 @@ extern unsigned long __bus_to_virt(unsigned long);
#endif
-#if defined(CONFIG_ARCH_FOOTBRIDGE)
-
/* Task size and page offset at 3GB */
#define TASK_SIZE UL(0xbf000000)
#define PAGE_OFFSET UL(0xc0000000)
@@ -53,23 +51,6 @@ extern unsigned long __bus_to_virt(unsigned long);
*/
#define FLUSH_BASE 0xf9000000
-#elif defined(CONFIG_ARCH_CO285)
-
-/* Task size and page offset at 1.5GB */
-#define TASK_SIZE UL(0x5f000000)
-#define PAGE_OFFSET UL(0x60000000)
-
-/*
- * Cache flushing area.
- */
-#define FLUSH_BASE 0x7e000000
-
-#else
-
-#error "Undefined footbridge architecture"
-
-#endif
-
/*
* Physical DRAM offset.
*/
diff --git a/include/asm-arm/arch-ebsa285/vmalloc.h b/include/asm-arm/arch-ebsa285/vmalloc.h
index 02598200997d..e487d7e8c8a6 100644
--- a/include/asm-arm/arch-ebsa285/vmalloc.h
+++ b/include/asm-arm/arch-ebsa285/vmalloc.h
@@ -7,8 +7,4 @@
*/
-#ifdef CONFIG_ARCH_FOOTBRIDGE
#define VMALLOC_END (PAGE_OFFSET + 0x30000000)
-#else
-#define VMALLOC_END (PAGE_OFFSET + 0x20000000)
-#endif
diff --git a/include/asm-arm/arch-imx/hardware.h b/include/asm-arm/arch-imx/hardware.h
index adffb6acf42a..6542ca5e8c33 100644
--- a/include/asm-arm/arch-imx/hardware.h
+++ b/include/asm-arm/arch-imx/hardware.h
@@ -73,14 +73,6 @@
*/
extern void imx_gpio_mode( int gpio_mode );
-/* get frequencies in Hz */
-extern unsigned int imx_get_system_clk(void);
-extern unsigned int imx_get_mcu_clk(void);
-extern unsigned int imx_get_perclk1(void); /* UART[12], Timer[12], PWM */
-extern unsigned int imx_get_perclk2(void); /* LCD, SD, SPI[12] */
-extern unsigned int imx_get_perclk3(void); /* SSI */
-extern unsigned int imx_get_hclk(void); /* SDRAM, CSI, Memory Stick,*/
- /* I2C, DMA */
#endif
#define MAXIRQNUM 62
diff --git a/include/asm-arm/arch-imx/imx-dma.h b/include/asm-arm/arch-imx/imx-dma.h
index 5b1066da4e1f..44d89c35539a 100644
--- a/include/asm-arm/arch-imx/imx-dma.h
+++ b/include/asm-arm/arch-imx/imx-dma.h
@@ -88,7 +88,7 @@ int imx_dma_request(imx_dmach_t dma_ch, const char *name);
void imx_dma_free(imx_dmach_t dma_ch);
-int imx_dma_request_by_prio(imx_dmach_t *pdma_ch, const char *name, imx_dma_prio prio);
+imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio);
#endif /* _ASM_ARCH_IMX_DMA_H */
diff --git a/include/asm-arm/arch-imx/imx-uart.h b/include/asm-arm/arch-imx/imx-uart.h
index 3a685e1780ea..d54eb1d48026 100644
--- a/include/asm-arm/arch-imx/imx-uart.h
+++ b/include/asm-arm/arch-imx/imx-uart.h
@@ -4,6 +4,8 @@
#define IMXUART_HAVE_RTSCTS (1<<0)
struct imxuart_platform_data {
+ int (*init)(struct platform_device *pdev);
+ void (*exit)(struct platform_device *pdev);
unsigned int flags;
};
diff --git a/include/asm-arm/arch-iop13xx/dma.h b/include/asm-arm/arch-iop13xx/dma.h
index 2e15da53ff79..d79846fbb394 100644
--- a/include/asm-arm/arch-iop13xx/dma.h
+++ b/include/asm-arm/arch-iop13xx/dma.h
@@ -1,3 +1,3 @@
#ifndef _IOP13XX_DMA_H
-#define _IOP13XX_DMA_H_
+#define _IOP13XX_DMA_H
#endif
diff --git a/include/asm-arm/arch-iop32x/gpio.h b/include/asm-arm/arch-iop32x/gpio.h
new file mode 100644
index 000000000000..708f4ec9db1d
--- /dev/null
+++ b/include/asm-arm/arch-iop32x/gpio.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_IOP32X_GPIO_H
+#define __ASM_ARCH_IOP32X_GPIO_H
+
+#include <asm/hardware/iop3xx-gpio.h>
+
+#endif
diff --git a/include/asm-arm/arch-iop33x/gpio.h b/include/asm-arm/arch-iop33x/gpio.h
new file mode 100644
index 000000000000..ddd55bba9bb9
--- /dev/null
+++ b/include/asm-arm/arch-iop33x/gpio.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_IOP33X_GPIO_H
+#define __ASM_ARCH_IOP33X_GPIO_H
+
+#include <asm/hardware/iop3xx-gpio.h>
+
+#endif
diff --git a/include/asm-arm/arch-ixp4xx/fsg.h b/include/asm-arm/arch-ixp4xx/fsg.h
new file mode 100644
index 000000000000..c0100cc7981c
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/fsg.h
@@ -0,0 +1,50 @@
+/*
+ * include/asm-arm/arch-ixp4xx/fsg.h
+ *
+ * Freecom FSG-3 platform specific definitions
+ *
+ * Author: Rod Whitby <rod@whitby.id.au>
+ * Author: Tomasz Chmielewski <mangoo@wpkg.org>
+ * Maintainers: http://www.nslu2-linux.org
+ *
+ * Based on coyote.h by
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+
+#define FSG_SDA_PIN 12
+#define FSG_SCL_PIN 13
+
+/*
+ * FSG PCI IRQs
+ */
+#define FSG_PCI_MAX_DEV 3
+#define FSG_PCI_IRQ_LINES 3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define FSG_PCI_INTA_PIN 6
+#define FSG_PCI_INTB_PIN 7
+#define FSG_PCI_INTC_PIN 5
+
+/* Buttons */
+
+#define FSG_SB_GPIO 4 /* sync button */
+#define FSG_RB_GPIO 9 /* reset button */
+#define FSG_UB_GPIO 10 /* usb button */
+
+/* LEDs */
+
+#define FSG_LED_WLAN_BIT 0
+#define FSG_LED_WAN_BIT 1
+#define FSG_LED_SATA_BIT 2
+#define FSG_LED_USB_BIT 4
+#define FSG_LED_RING_BIT 5
+#define FSG_LED_SYNC_BIT 7
diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h
index 73e8dc36f6a4..fa723a627854 100644
--- a/include/asm-arm/arch-ixp4xx/hardware.h
+++ b/include/asm-arm/arch-ixp4xx/hardware.h
@@ -45,5 +45,6 @@
#include "nslu2.h"
#include "nas100d.h"
#include "dsmg600.h"
+#include "fsg.h"
#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-ixp4xx/irqs.h b/include/asm-arm/arch-ixp4xx/irqs.h
index 11801605047b..674af4a84147 100644
--- a/include/asm-arm/arch-ixp4xx/irqs.h
+++ b/include/asm-arm/arch-ixp4xx/irqs.h
@@ -128,4 +128,11 @@
#define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7
#define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6
+/*
+ * Freecom FSG-3 Board IRQs
+ */
+#define IRQ_FSG_PCI_INTA IRQ_IXP4XX_GPIO6
+#define IRQ_FSG_PCI_INTB IRQ_IXP4XX_GPIO7
+#define IRQ_FSG_PCI_INTC IRQ_IXP4XX_GPIO5
+
#endif
diff --git a/include/asm-arm/arch-kirkwood/debug-macro.S b/include/asm-arm/arch-kirkwood/debug-macro.S
new file mode 100644
index 000000000000..f55fb8ad9ee4
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * include/asm-arm/arch-kirkwood/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/arch/kirkwood.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =KIRKWOOD_REGS_PHYS_BASE
+ ldrne \rx, =KIRKWOOD_REGS_VIRT_BASE
+ orr \rx, \rx, #0x00012000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-kirkwood/dma.h b/include/asm-arm/arch-kirkwood/dma.h
new file mode 100644
index 000000000000..40a8c178f10d
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/dma.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/include/asm-arm/arch-kirkwood/entry-macro.S b/include/asm-arm/arch-kirkwood/entry-macro.S
new file mode 100644
index 000000000000..fc6a43d9355c
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/entry-macro.S
@@ -0,0 +1,40 @@
+/*
+ * include/asm-arm/arch-kirkwood/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Kirkwood platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/arch/kirkwood.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IRQ_VIRT_BASE
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ @ check low interrupts
+ ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+ ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
+ mov \irqnr, #31
+ ands \irqstat, \irqstat, \tmp
+ bne 1001f
+
+ @ if no low interrupts set, check high interrupts
+ ldr \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+ ldr \tmp, [\base, #IRQ_MASK_HIGH_OFF]
+ mov \irqnr, #63
+ ands \irqstat, \irqstat, \tmp
+
+ @ find first active interrupt source
+1001: clzne \irqstat, \irqstat
+ subne \irqnr, \irqnr, \irqstat
+ .endm
diff --git a/include/asm-arm/arch-kirkwood/hardware.h b/include/asm-arm/arch-kirkwood/hardware.h
new file mode 100644
index 000000000000..e695719771a5
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * include/asm-arm/arch-kirkwood/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "kirkwood.h"
+
+#define pcibios_assign_all_busses() 1
+
+#define PCIBIOS_MIN_IO 0x00001000
+#define PCIBIOS_MIN_MEM 0x01000000
+#define PCIMEM_BASE KIRKWOOD_PCIE_MEM_PHYS_BASE /* mem base for VGA */
+
+
+#endif
diff --git a/include/asm-arm/arch-kirkwood/io.h b/include/asm-arm/arch-kirkwood/io.h
new file mode 100644
index 000000000000..0ef6e95f5d5b
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/io.h
@@ -0,0 +1,26 @@
+/*
+ * include/asm-arm/arch-kirkwood/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "kirkwood.h"
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE)
+ + KIRKWOOD_PCIE_IO_VIRT_BASE);
+}
+
+#define __io(a) __io(a)
+#define __mem_pci(a) (a)
+
+
+#endif
diff --git a/include/asm-arm/arch-kirkwood/irqs.h b/include/asm-arm/arch-kirkwood/irqs.h
new file mode 100644
index 000000000000..2e7b5da6335c
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/irqs.h
@@ -0,0 +1,63 @@
+/*
+ * include/asm-arm/arch-kirkwood/irqs.h
+ *
+ * IRQ definitions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "kirkwood.h" /* need GPIO_MAX */
+
+/*
+ * Low Interrupt Controller
+ */
+#define IRQ_KIRKWOOD_HIGH_SUM 0
+#define IRQ_KIRKWOOD_BRIDGE 1
+#define IRQ_KIRKWOOD_HOST2CPU 2
+#define IRQ_KIRKWOOD_CPU2HOST 3
+#define IRQ_KIRKWOOD_XOR_00 5
+#define IRQ_KIRKWOOD_XOR_01 6
+#define IRQ_KIRKWOOD_XOR_10 7
+#define IRQ_KIRKWOOD_XOR_11 8
+#define IRQ_KIRKWOOD_PCIE 9
+#define IRQ_KIRKWOOD_GE00_SUM 11
+#define IRQ_KIRKWOOD_GE01_SUM 15
+#define IRQ_KIRKWOOD_USB 19
+#define IRQ_KIRKWOOD_SATA 21
+#define IRQ_KIRKWOOD_CRYPTO 22
+#define IRQ_KIRKWOOD_SPI 23
+#define IRQ_KIRKWOOD_I2S 24
+#define IRQ_KIRKWOOD_TS_0 26
+#define IRQ_KIRKWOOD_SDIO 28
+#define IRQ_KIRKWOOD_TWSI 29
+#define IRQ_KIRKWOOD_AVB 30
+#define IRQ_KIRKWOOD_TDMI 31
+
+/*
+ * High Interrupt Controller
+ */
+#define IRQ_KIRKWOOD_UART_0 33
+#define IRQ_KIRKWOOD_UART_1 34
+#define IRQ_KIRKWOOD_GPIO_LOW_0_7 35
+#define IRQ_KIRKWOOD_GPIO_LOW_8_15 36
+#define IRQ_KIRKWOOD_GPIO_LOW_16_23 37
+#define IRQ_KIRKWOOD_GPIO_LOW_24_31 38
+#define IRQ_KIRKWOOD_GPIO_HIGH_0_7 39
+#define IRQ_KIRKWOOD_GPIO_HIGH_8_15 40
+#define IRQ_KIRKWOOD_GPIO_HIGH_16_23 41
+
+/*
+ * KIRKWOOD General Purpose Pins
+ */
+#define IRQ_KIRKWOOD_GPIO_START 64
+#define NR_GPIO_IRQS GPIO_MAX
+
+#define NR_IRQS (IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/include/asm-arm/arch-kirkwood/kirkwood.h b/include/asm-arm/arch-kirkwood/kirkwood.h
new file mode 100644
index 000000000000..bb31b315c350
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/kirkwood.h
@@ -0,0 +1,100 @@
+/*
+ * include/asm-arm/arch-kirkwood/kirkwood.h
+ *
+ * Generic definitions for Marvell Kirkwood SoC flavors:
+ * 88F6180, 88F6192 and 88F6281.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_KIRKWOOD_H
+#define __ASM_ARCH_KIRKWOOD_H
+
+/*
+ * Marvell Kirkwood address maps.
+ *
+ * phys
+ * e0000000 PCIe Memory space
+ * f1000000 on-chip peripheral registers
+ * f2000000 PCIe I/O space
+ * f3000000 NAND controller address window
+ *
+ * virt phys size
+ * fee00000 f1000000 1M on-chip peripheral registers
+ * fef00000 f2000000 1M PCIe I/O space
+ */
+
+#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf3000000
+#define KIRKWOOD_NAND_MEM_SIZE SZ_64K /* 1K is sufficient, but 64K
+ * is the minimal window size
+ */
+
+#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
+#define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfef00000
+#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000
+#define KIRKWOOD_PCIE_IO_SIZE SZ_1M
+
+#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
+#define KIRKWOOD_REGS_VIRT_BASE 0xfee00000
+#define KIRKWOOD_REGS_SIZE SZ_1M
+
+#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
+#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M
+
+/*
+ * MBUS bridge registers.
+ */
+#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_RESET 0x00000002
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_LOW_OFF 0x0000
+#define IRQ_MASK_LOW_OFF 0x0004
+#define IRQ_CAUSE_HIGH_OFF 0x0010
+#define IRQ_MASK_HIGH_OFF 0x0014
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
+#define L2_WRITETHROUGH 0x00000010
+
+/*
+ * Register Map
+ */
+#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000)
+#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500)
+
+#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000)
+#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000)
+#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE | 0x0030)
+#define DEVICE_ID (DEV_BUS_VIRT_BASE | 0x0034)
+#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0300)
+#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0600)
+#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
+#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
+#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
+#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
+
+#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000)
+
+#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
+
+#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x70000)
+#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000)
+
+#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000)
+
+
+#define GPIO_MAX 50
+
+
+#endif
diff --git a/include/asm-arm/arch-kirkwood/memory.h b/include/asm-arm/arch-kirkwood/memory.h
new file mode 100644
index 000000000000..e5108f408ce6
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/memory.h
@@ -0,0 +1,14 @@
+/*
+ * include/asm-arm/arch-kirkwood/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+
+#endif
diff --git a/include/asm-arm/arch-kirkwood/system.h b/include/asm-arm/arch-kirkwood/system.h
new file mode 100644
index 000000000000..8dde7e379855
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/system.h
@@ -0,0 +1,37 @@
+/*
+ * include/asm-arm/arch-kirkwood/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/kirkwood.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
+
+
+#endif
diff --git a/include/asm-arm/arch-kirkwood/timex.h b/include/asm-arm/arch-kirkwood/timex.h
new file mode 100644
index 000000000000..82122e134e3c
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/timex.h
@@ -0,0 +1,11 @@
+/*
+ * include/asm-arm/arch-kirkwood/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE (100 * HZ)
+
+#define KIRKWOOD_TCLK 166666667
diff --git a/include/asm-arm/arch-kirkwood/uncompress.h b/include/asm-arm/arch-kirkwood/uncompress.h
new file mode 100644
index 000000000000..a9062b6d7680
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * include/asm-arm/arch-kirkwood/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <asm/arch/kirkwood.h>
+
+#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+ unsigned char *base = SERIAL_BASE;
+ int i;
+
+ for (i = 0; i < 0x1000; i++) {
+ if (base[UART_LSR << 2] & UART_LSR_THRE)
+ break;
+ barrier();
+ }
+
+ base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+ unsigned char *base = SERIAL_BASE;
+ unsigned char mask;
+ int i;
+
+ mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+ for (i = 0; i < 0x1000; i++) {
+ if ((base[UART_LSR << 2] & mask) == mask)
+ break;
+ barrier();
+ }
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-kirkwood/vmalloc.h b/include/asm-arm/arch-kirkwood/vmalloc.h
new file mode 100644
index 000000000000..41852c6e77f3
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * include/asm-arm/arch-kirkwood/vmalloc.h
+ */
+
+#define VMALLOC_END 0xfe800000
diff --git a/include/asm-arm/arch-loki/debug-macro.S b/include/asm-arm/arch-loki/debug-macro.S
new file mode 100644
index 000000000000..585502e96513
--- /dev/null
+++ b/include/asm-arm/arch-loki/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * include/asm-arm/arch-loki/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/arch/loki.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =LOKI_REGS_PHYS_BASE
+ ldrne \rx, =LOKI_REGS_VIRT_BASE
+ orr \rx, \rx, #0x00012000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-loki/dma.h b/include/asm-arm/arch-loki/dma.h
new file mode 100644
index 000000000000..40a8c178f10d
--- /dev/null
+++ b/include/asm-arm/arch-loki/dma.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/include/asm-arm/arch-loki/entry-macro.S b/include/asm-arm/arch-loki/entry-macro.S
new file mode 100644
index 000000000000..693257cdbeb8
--- /dev/null
+++ b/include/asm-arm/arch-loki/entry-macro.S
@@ -0,0 +1,30 @@
+/*
+ * include/asm-arm/arch-loki/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Loki (88RC8480) platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/arch/loki.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IRQ_VIRT_BASE
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqstat, [\base, #IRQ_CAUSE_OFF]
+ ldr \tmp, [\base, #IRQ_MASK_OFF]
+ mov \irqnr, #0
+ ands \irqstat, \irqstat, \tmp
+ clzne \irqnr, \irqstat
+ rsbne \irqnr, \irqnr, #31
+ .endm
diff --git a/include/asm-arm/arch-loki/hardware.h b/include/asm-arm/arch-loki/hardware.h
new file mode 100644
index 000000000000..f65b01c733b6
--- /dev/null
+++ b/include/asm-arm/arch-loki/hardware.h
@@ -0,0 +1,15 @@
+/*
+ * include/asm-arm/arch-loki/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "loki.h"
+
+
+#endif
diff --git a/include/asm-arm/arch-loki/io.h b/include/asm-arm/arch-loki/io.h
new file mode 100644
index 000000000000..e7418a915e75
--- /dev/null
+++ b/include/asm-arm/arch-loki/io.h
@@ -0,0 +1,26 @@
+/*
+ * include/asm-arm/arch-loki/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "loki.h"
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)((addr - LOKI_PCIE0_IO_PHYS_BASE)
+ + LOKI_PCIE0_IO_VIRT_BASE);
+}
+
+#define __io(a) __io(a)
+#define __mem_pci(a) (a)
+
+
+#endif
diff --git a/include/asm-arm/arch-loki/irqs.h b/include/asm-arm/arch-loki/irqs.h
new file mode 100644
index 000000000000..7e4971438072
--- /dev/null
+++ b/include/asm-arm/arch-loki/irqs.h
@@ -0,0 +1,58 @@
+/*
+ * include/asm-arm/arch-loki/irqs.h
+ *
+ * IRQ definitions for Marvell Loki (88RC8480) SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "loki.h" /* need GPIO_MAX */
+
+/*
+ * Interrupt Controller
+ */
+#define IRQ_LOKI_PCIE_A_CPU_DRBL 0
+#define IRQ_LOKI_CPU_PCIE_A_DRBL 1
+#define IRQ_LOKI_PCIE_B_CPU_DRBL 2
+#define IRQ_LOKI_CPU_PCIE_B_DRBL 3
+#define IRQ_LOKI_COM_A_ERR 6
+#define IRQ_LOKI_COM_A_IN 7
+#define IRQ_LOKI_COM_A_OUT 8
+#define IRQ_LOKI_COM_B_ERR 9
+#define IRQ_LOKI_COM_B_IN 10
+#define IRQ_LOKI_COM_B_OUT 11
+#define IRQ_LOKI_DMA_A 12
+#define IRQ_LOKI_DMA_B 13
+#define IRQ_LOKI_SAS_A 14
+#define IRQ_LOKI_SAS_B 15
+#define IRQ_LOKI_DDR 16
+#define IRQ_LOKI_XOR 17
+#define IRQ_LOKI_BRIDGE 18
+#define IRQ_LOKI_PCIE_A_ERR 20
+#define IRQ_LOKI_PCIE_A_INT 21
+#define IRQ_LOKI_PCIE_B_ERR 22
+#define IRQ_LOKI_PCIE_B_INT 23
+#define IRQ_LOKI_GBE_A_INT 24
+#define IRQ_LOKI_GBE_B_INT 25
+#define IRQ_LOKI_DEV_ERR 26
+#define IRQ_LOKI_UART0 27
+#define IRQ_LOKI_UART1 28
+#define IRQ_LOKI_TWSI 29
+#define IRQ_LOKI_GPIO_23_0 30
+#define IRQ_LOKI_GPIO_25_24 31
+
+/*
+ * Loki General Purpose Pins
+ */
+#define IRQ_LOKI_GPIO_START 32
+#define NR_GPIO_IRQS GPIO_MAX
+
+#define NR_IRQS (IRQ_LOKI_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/include/asm-arm/arch-loki/loki.h b/include/asm-arm/arch-loki/loki.h
new file mode 100644
index 000000000000..5dd05ee0a4e6
--- /dev/null
+++ b/include/asm-arm/arch-loki/loki.h
@@ -0,0 +1,97 @@
+/*
+ * include/asm-arm/arch-loki/loki.h
+ *
+ * Generic definitions for Marvell Loki (88RC8480) SoC flavors
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_LOKI_H
+#define __ASM_ARCH_LOKI_H
+
+/*
+ * Marvell Loki (88RC8480) address maps.
+ *
+ * phys
+ * d0000000 on-chip peripheral registers
+ * e0000000 PCIe 0 Memory space
+ * e8000000 PCIe 1 Memory space
+ * f0000000 PCIe 0 I/O space
+ * f0100000 PCIe 1 I/O space
+ *
+ * virt phys size
+ * fed00000 d0000000 1M on-chip peripheral registers
+ * fee00000 f0000000 64K PCIe 0 I/O space
+ * fef00000 f0100000 64K PCIe 1 I/O space
+ */
+
+#define LOKI_REGS_PHYS_BASE 0xd0000000
+#define LOKI_REGS_VIRT_BASE 0xfed00000
+#define LOKI_REGS_SIZE SZ_1M
+
+#define LOKI_PCIE0_IO_PHYS_BASE 0xf0000000
+#define LOKI_PCIE0_IO_VIRT_BASE 0xfee00000
+#define LOKI_PCIE0_IO_BUS_BASE 0x00000000
+#define LOKI_PCIE0_IO_SIZE SZ_64K
+
+#define LOKI_PCIE1_IO_PHYS_BASE 0xf0100000
+#define LOKI_PCIE1_IO_VIRT_BASE 0xfef00000
+#define LOKI_PCIE1_IO_BUS_BASE 0x00000000
+#define LOKI_PCIE1_IO_SIZE SZ_64K
+
+#define LOKI_PCIE0_MEM_PHYS_BASE 0xe0000000
+#define LOKI_PCIE0_MEM_SIZE SZ_128M
+
+#define LOKI_PCIE1_MEM_PHYS_BASE 0xe8000000
+#define LOKI_PCIE1_MEM_SIZE SZ_128M
+
+/*
+ * Register Map
+ */
+#define DEV_BUS_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x10000)
+#define DEV_BUS_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x10000)
+#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
+#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
+#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
+#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
+
+#define BRIDGE_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x))
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR 0x0004
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_OFF 0x0000
+#define IRQ_MASK_OFF 0x0004
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+
+#define PCIE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x30000)
+
+#define PCIE1_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x40000)
+
+#define SAS0_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x80000)
+
+#define SAS1_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x90000)
+
+#define GE0_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0xa0000)
+#define GE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xa0000)
+
+#define GE1_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0xb0000)
+#define GE1_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xb0000)
+
+#define DDR_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xf0000)
+#define DDR_REG(x) (DDR_VIRT_BASE | (x))
+
+
+#define GPIO_MAX 8
+
+
+#endif
diff --git a/include/asm-arm/arch-loki/memory.h b/include/asm-arm/arch-loki/memory.h
new file mode 100644
index 000000000000..835101e49875
--- /dev/null
+++ b/include/asm-arm/arch-loki/memory.h
@@ -0,0 +1,14 @@
+/*
+ * include/asm-arm/arch-loki/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+
+#endif
diff --git a/include/asm-arm/arch-loki/system.h b/include/asm-arm/arch-loki/system.h
new file mode 100644
index 000000000000..a3568ac8ec35
--- /dev/null
+++ b/include/asm-arm/arch-loki/system.h
@@ -0,0 +1,37 @@
+/*
+ * include/asm-arm/arch-loki/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/loki.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
+
+
+#endif
diff --git a/include/asm-arm/arch-loki/timex.h b/include/asm-arm/arch-loki/timex.h
new file mode 100644
index 000000000000..940014f97cae
--- /dev/null
+++ b/include/asm-arm/arch-loki/timex.h
@@ -0,0 +1,11 @@
+/*
+ * include/asm-arm/arch-loki/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE (100 * HZ)
+
+#define LOKI_TCLK 180000000
diff --git a/include/asm-arm/arch-loki/uncompress.h b/include/asm-arm/arch-loki/uncompress.h
new file mode 100644
index 000000000000..89a0cf88d3a5
--- /dev/null
+++ b/include/asm-arm/arch-loki/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * include/asm-arm/arch-loki/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <asm/arch/loki.h>
+
+#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+ unsigned char *base = SERIAL_BASE;
+ int i;
+
+ for (i = 0; i < 0x1000; i++) {
+ if (base[UART_LSR << 2] & UART_LSR_THRE)
+ break;
+ barrier();
+ }
+
+ base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+ unsigned char *base = SERIAL_BASE;
+ unsigned char mask;
+ int i;
+
+ mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+ for (i = 0; i < 0x1000; i++) {
+ if ((base[UART_LSR << 2] & mask) == mask)
+ break;
+ barrier();
+ }
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-loki/vmalloc.h b/include/asm-arm/arch-loki/vmalloc.h
new file mode 100644
index 000000000000..f5be06220491
--- /dev/null
+++ b/include/asm-arm/arch-loki/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * include/asm-arm/arch-loki/vmalloc.h
+ */
+
+#define VMALLOC_END 0xfe800000
diff --git a/include/asm-arm/arch-msm/irqs.h b/include/asm-arm/arch-msm/irqs.h
index 565430cfaa7e..e62a108b1857 100644
--- a/include/asm-arm/arch-msm/irqs.h
+++ b/include/asm-arm/arch-msm/irqs.h
@@ -15,6 +15,7 @@
*/
#ifndef __ASM_ARCH_MSM_IRQS_H
+#define __ASM_ARCH_MSM_IRQS_H
/* MSM ARM11 Interrupt Numbers */
/* See 80-VE113-1 A, pp219-221 */
diff --git a/include/asm-arm/arch-msm/timex.h b/include/asm-arm/arch-msm/timex.h
index 154b23fb3599..8724487ab4c9 100644
--- a/include/asm-arm/arch-msm/timex.h
+++ b/include/asm-arm/arch-msm/timex.h
@@ -14,6 +14,7 @@
*/
#ifndef __ASM_ARCH_MSM_TIMEX_H
+#define __ASM_ARCH_MSM_TIMEX_H
#define CLOCK_TICK_RATE 1000000
diff --git a/include/asm-arm/arch-mv78xx0/debug-macro.S b/include/asm-arm/arch-mv78xx0/debug-macro.S
new file mode 100644
index 000000000000..d0595bd645e5
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * include/asm-arm/arch-mv78xx0/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/arch/mv78xx0.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =MV78XX0_REGS_PHYS_BASE
+ ldrne \rx, =MV78XX0_REGS_VIRT_BASE
+ orr \rx, \rx, #0x00012000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-mv78xx0/dma.h b/include/asm-arm/arch-mv78xx0/dma.h
new file mode 100644
index 000000000000..40a8c178f10d
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/dma.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/include/asm-arm/arch-mv78xx0/entry-macro.S b/include/asm-arm/arch-mv78xx0/entry-macro.S
new file mode 100644
index 000000000000..e9a606b12669
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * include/asm-arm/arch-mv78xx0/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell MV78xx0 platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/arch/mv78xx0.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IRQ_VIRT_BASE
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ @ check low interrupts
+ ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+ ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
+ mov \irqnr, #31
+ ands \irqstat, \irqstat, \tmp
+
+ @ if no low interrupts set, check high interrupts
+ ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+ ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF]
+ moveq \irqnr, #63
+ andeqs \irqstat, \irqstat, \tmp
+
+ @ find first active interrupt source
+ clzne \irqstat, \irqstat
+ subne \irqnr, \irqnr, \irqstat
+ .endm
diff --git a/include/asm-arm/arch-mv78xx0/hardware.h b/include/asm-arm/arch-mv78xx0/hardware.h
new file mode 100644
index 000000000000..8e17926086c6
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * include/asm-arm/arch-mv78xx0/hardware.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "mv78xx0.h"
+
+#define pcibios_assign_all_busses() 1
+
+#define PCIBIOS_MIN_IO 0x00001000
+#define PCIBIOS_MIN_MEM 0x01000000
+#define PCIMEM_BASE MV78XX0_PCIE_MEM_PHYS_BASE /* mem base for VGA */
+
+
+#endif
diff --git a/include/asm-arm/arch-mv78xx0/io.h b/include/asm-arm/arch-mv78xx0/io.h
new file mode 100644
index 000000000000..415d4c98e3d1
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/io.h
@@ -0,0 +1,26 @@
+/*
+ * include/asm-arm/arch-mv78xx0/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "mv78xx0.h"
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0))
+ + MV78XX0_PCIE_IO_VIRT_BASE(0));
+}
+
+#define __io(a) __io(a)
+#define __mem_pci(a) (a)
+
+
+#endif
diff --git a/include/asm-arm/arch-mv78xx0/irqs.h b/include/asm-arm/arch-mv78xx0/irqs.h
new file mode 100644
index 000000000000..75930450cd65
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/irqs.h
@@ -0,0 +1,91 @@
+/*
+ * include/asm-arm/arch-mv78xx0/irqs.h
+ *
+ * IRQ definitions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "mv78xx0.h" /* need GPIO_MAX */
+
+/*
+ * MV78xx0 Low Interrupt Controller
+ */
+#define IRQ_MV78XX0_ERR 0
+#define IRQ_MV78XX0_SPI 1
+#define IRQ_MV78XX0_I2C_0 2
+#define IRQ_MV78XX0_I2C_1 3
+#define IRQ_MV78XX0_IDMA_0 4
+#define IRQ_MV78XX0_IDMA_1 5
+#define IRQ_MV78XX0_IDMA_2 6
+#define IRQ_MV78XX0_IDMA_3 7
+#define IRQ_MV78XX0_TIMER_0 8
+#define IRQ_MV78XX0_TIMER_1 9
+#define IRQ_MV78XX0_TIMER_2 10
+#define IRQ_MV78XX0_TIMER_3 11
+#define IRQ_MV78XX0_UART_0 12
+#define IRQ_MV78XX0_UART_1 13
+#define IRQ_MV78XX0_UART_2 14
+#define IRQ_MV78XX0_UART_3 15
+#define IRQ_MV78XX0_USB_0 16
+#define IRQ_MV78XX0_USB_1 17
+#define IRQ_MV78XX0_USB_2 18
+#define IRQ_MV78XX0_CRYPTO 19
+#define IRQ_MV78XX0_SDIO_0 20
+#define IRQ_MV78XX0_SDIO_1 21
+#define IRQ_MV78XX0_XOR_0 22
+#define IRQ_MV78XX0_XOR_1 23
+#define IRQ_MV78XX0_I2S_0 24
+#define IRQ_MV78XX0_I2S_1 25
+#define IRQ_MV78XX0_SATA 26
+#define IRQ_MV78XX0_TDMI 27
+
+/*
+ * MV78xx0 High Interrupt Controller
+ */
+#define IRQ_MV78XX0_PCIE_00 32
+#define IRQ_MV78XX0_PCIE_01 33
+#define IRQ_MV78XX0_PCIE_02 34
+#define IRQ_MV78XX0_PCIE_03 35
+#define IRQ_MV78XX0_PCIE_10 36
+#define IRQ_MV78XX0_PCIE_11 37
+#define IRQ_MV78XX0_PCIE_12 38
+#define IRQ_MV78XX0_PCIE_13 39
+#define IRQ_MV78XX0_GE00_SUM 40
+#define IRQ_MV78XX0_GE00_RX 41
+#define IRQ_MV78XX0_GE00_TX 42
+#define IRQ_MV78XX0_GE00_MISC 43
+#define IRQ_MV78XX0_GE01_SUM 44
+#define IRQ_MV78XX0_GE01_RX 45
+#define IRQ_MV78XX0_GE01_TX 46
+#define IRQ_MV78XX0_GE01_MISC 47
+#define IRQ_MV78XX0_GE10_SUM 48
+#define IRQ_MV78XX0_GE10_RX 49
+#define IRQ_MV78XX0_GE10_TX 50
+#define IRQ_MV78XX0_GE10_MISC 51
+#define IRQ_MV78XX0_GE11_SUM 52
+#define IRQ_MV78XX0_GE11_RX 53
+#define IRQ_MV78XX0_GE11_TX 54
+#define IRQ_MV78XX0_GE11_MISC 55
+#define IRQ_MV78XX0_GPIO_0_7 56
+#define IRQ_MV78XX0_GPIO_8_15 57
+#define IRQ_MV78XX0_GPIO_16_23 58
+#define IRQ_MV78XX0_GPIO_24_31 59
+#define IRQ_MV78XX0_DB_IN 60
+#define IRQ_MV78XX0_DB_OUT 61
+
+/*
+ * MV78XX0 General Purpose Pins
+ */
+#define IRQ_MV78XX0_GPIO_START 64
+#define NR_GPIO_IRQS GPIO_MAX
+
+#define NR_IRQS (IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/include/asm-arm/arch-mv78xx0/memory.h b/include/asm-arm/arch-mv78xx0/memory.h
new file mode 100644
index 000000000000..721a6b185b91
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/memory.h
@@ -0,0 +1,14 @@
+/*
+ * include/asm-arm/arch-mv78xx0/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+
+#endif
diff --git a/include/asm-arm/arch-mv78xx0/mv78xx0.h b/include/asm-arm/arch-mv78xx0/mv78xx0.h
new file mode 100644
index 000000000000..9f5d83c73faa
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/mv78xx0.h
@@ -0,0 +1,126 @@
+/*
+ * include/asm-arm/arch-mv78xx0/mv78xx0.h
+ *
+ * Generic definitions for Marvell MV78xx0 SoC flavors:
+ * MV781x0 and MV782x0.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_MV78XX0_H
+#define __ASM_ARCH_MV78XX0_H
+
+/*
+ * Marvell MV78xx0 address maps.
+ *
+ * phys
+ * c0000000 PCIe Memory space
+ * f0800000 PCIe #0 I/O space
+ * f0900000 PCIe #1 I/O space
+ * f0a00000 PCIe #2 I/O space
+ * f0b00000 PCIe #3 I/O space
+ * f0c00000 PCIe #4 I/O space
+ * f0d00000 PCIe #5 I/O space
+ * f0e00000 PCIe #6 I/O space
+ * f0f00000 PCIe #7 I/O space
+ * f1000000 on-chip peripheral registers
+ *
+ * virt phys size
+ * fe400000 f102x000 16K core-specific peripheral registers
+ * fe700000 f0800000 1M PCIe #0 I/O space
+ * fe800000 f0900000 1M PCIe #1 I/O space
+ * fe900000 f0a00000 1M PCIe #2 I/O space
+ * fea00000 f0b00000 1M PCIe #3 I/O space
+ * feb00000 f0c00000 1M PCIe #4 I/O space
+ * fec00000 f0d00000 1M PCIe #5 I/O space
+ * fed00000 f0e00000 1M PCIe #6 I/O space
+ * fee00000 f0f00000 1M PCIe #7 I/O space
+ * fef00000 f1000000 1M on-chip peripheral registers
+ */
+#define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000
+#define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000
+#define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000
+#define MV78XX0_CORE_REGS_SIZE SZ_16K
+
+#define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20))
+#define MV78XX0_PCIE_IO_VIRT_BASE(i) (0xfe700000 + ((i) << 20))
+#define MV78XX0_PCIE_IO_SIZE SZ_1M
+
+#define MV78XX0_REGS_PHYS_BASE 0xf1000000
+#define MV78XX0_REGS_VIRT_BASE 0xfef00000
+#define MV78XX0_REGS_SIZE SZ_1M
+
+#define MV78XX0_PCIE_MEM_PHYS_BASE 0xc0000000
+#define MV78XX0_PCIE_MEM_SIZE 0x30000000
+
+/*
+ * Core-specific peripheral registers.
+ */
+#define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE)
+#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define L2_WRITETHROUGH 0x00020000
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_LOW_OFF 0x0004
+#define IRQ_CAUSE_HIGH_OFF 0x0008
+#define IRQ_MASK_LOW_OFF 0x0010
+#define IRQ_MASK_HIGH_OFF 0x0014
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+
+/*
+ * Register Map
+ */
+#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x00000)
+#define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE | 0x1500)
+#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE | 0x1700)
+
+#define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x10000)
+#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000)
+#define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE | 0x0030)
+#define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE | 0x0034)
+#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
+#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
+#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
+#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
+#define UART2_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2200)
+#define UART2_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2200)
+#define UART3_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2300)
+#define UART3_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2300)
+
+#define GE10_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x30000)
+#define GE11_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x34000)
+
+#define PCIE00_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x40000)
+#define PCIE01_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x44000)
+#define PCIE02_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x48000)
+#define PCIE03_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x4c000)
+
+#define USB0_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x50000)
+#define USB1_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x51000)
+#define USB2_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x52000)
+
+#define GE00_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x70000)
+#define GE01_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x74000)
+
+#define PCIE10_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x80000)
+#define PCIE11_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x84000)
+#define PCIE12_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x88000)
+#define PCIE13_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x8c000)
+
+#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0xa0000)
+
+
+#define GPIO_MAX 32
+
+
+#endif
diff --git a/include/asm-arm/arch-mv78xx0/system.h b/include/asm-arm/arch-mv78xx0/system.h
new file mode 100644
index 000000000000..7eb47d376db9
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/system.h
@@ -0,0 +1,37 @@
+/*
+ * include/asm-arm/arch-mv78xx0/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/mv78xx0.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
+
+
+#endif
diff --git a/include/asm-arm/arch-mv78xx0/timex.h b/include/asm-arm/arch-mv78xx0/timex.h
new file mode 100644
index 000000000000..a854b1ccbd01
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/timex.h
@@ -0,0 +1,9 @@
+/*
+ * include/asm-arm/arch-mv78xx0/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/include/asm-arm/arch-mv78xx0/uncompress.h b/include/asm-arm/arch-mv78xx0/uncompress.h
new file mode 100644
index 000000000000..3bfe0a293ef7
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * include/asm-arm/arch-mv78xx0/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <asm/arch/mv78xx0.h>
+
+#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+ unsigned char *base = SERIAL_BASE;
+ int i;
+
+ for (i = 0; i < 0x1000; i++) {
+ if (base[UART_LSR << 2] & UART_LSR_THRE)
+ break;
+ barrier();
+ }
+
+ base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+ unsigned char *base = SERIAL_BASE;
+ unsigned char mask;
+ int i;
+
+ mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+ for (i = 0; i < 0x1000; i++) {
+ if ((base[UART_LSR << 2] & mask) == mask)
+ break;
+ barrier();
+ }
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-mv78xx0/vmalloc.h b/include/asm-arm/arch-mv78xx0/vmalloc.h
new file mode 100644
index 000000000000..f2c512197579
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * include/asm-arm/arch-mv78xx0/vmalloc.h
+ */
+
+#define VMALLOC_END 0xfe000000
diff --git a/include/asm-arm/arch-mxc/board-mx27ads.h b/include/asm-arm/arch-mxc/board-mx27ads.h
new file mode 100644
index 000000000000..61e66dac90ef
--- /dev/null
+++ b/include/asm-arm/arch-mxc/board-mx27ads.h
@@ -0,0 +1,354 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX27ADS_H__
+#define __ASM_ARCH_MXC_BOARD_MX27ADS_H__
+
+/* external interrupt multiplexer */
+#define MXC_EXP_IO_BASE (MXC_GPIO_BASE + MXC_MAX_GPIO_LINES)
+
+#define MXC_VIRTUAL_INTS_BASE (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES)
+#define MXC_SDIO1_CARD_IRQ MXC_VIRTUAL_INTS_BASE
+#define MXC_SDIO2_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 1)
+#define MXC_SDIO3_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 2)
+
+#define MXC_MAX_BOARD_INTS (MXC_MAX_EXP_IO_LINES + \
+ MXC_MAX_VIRTUAL_INTS)
+
+/*
+ * MXC UART EVB board level configurations
+ */
+
+#define MXC_LL_EXTUART_PADDR (CS4_BASE_ADDR + 0x20000)
+#define MXC_LL_EXTUART_VADDR (CS4_BASE_ADDR_VIRT + 0x20000)
+#define MXC_LL_EXTUART_16BIT_BUS
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR)
+
+/*
+ * @name Memory Size parameters
+ */
+
+/*
+ * Size of SDRAM memory
+ */
+#define SDRAM_MEM_SIZE SZ_128M
+
+/*
+ * PBC Controller parameters
+ */
+
+/*
+ * Base address of PBC controller, CS4
+ */
+#define PBC_BASE_ADDRESS 0xEB000000
+#define PBC_REG_ADDR(offset) (PBC_BASE_ADDRESS + (offset))
+
+/*
+ * PBC Interupt name definitions
+ */
+#define PBC_GPIO1_0 0
+#define PBC_GPIO1_1 1
+#define PBC_GPIO1_2 2
+#define PBC_GPIO1_3 3
+#define PBC_GPIO1_4 4
+#define PBC_GPIO1_5 5
+
+#define PBC_INTR_MAX_NUM 6
+#define PBC_INTR_SHARED_MAX_NUM 8
+
+/* When the PBC address connection is fixed in h/w, defined as 1 */
+#define PBC_ADDR_SH 0
+
+/* Offsets for the PBC Controller register */
+/*
+ * PBC Board version register offset
+ */
+#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 set address.
+ */
+#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 clear address.
+ */
+#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 2 set address.
+ */
+#define PBC_BCTRL2_SET_REG PBC_REG_ADDR(0x00010 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 2 clear address.
+ */
+#define PBC_BCTRL2_CLEAR_REG PBC_REG_ADDR(0x00014 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 3 set address.
+ */
+#define PBC_BCTRL3_SET_REG PBC_REG_ADDR(0x00018 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 3 clear address.
+ */
+#define PBC_BCTRL3_CLEAR_REG PBC_REG_ADDR(0x0001C >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 3 set address.
+ */
+#define PBC_BCTRL4_SET_REG PBC_REG_ADDR(0x00020 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 4 clear address.
+ */
+#define PBC_BCTRL4_CLEAR_REG PBC_REG_ADDR(0x00024 >> PBC_ADDR_SH)
+/*PBC_ADDR_SH
+ * PBC Board status register 1.
+ */
+#define PBC_BSTAT1_REG PBC_REG_ADDR(0x00028 >> PBC_ADDR_SH)
+/*
+ * PBC Board interrupt status register.
+ */
+#define PBC_INTSTATUS_REG PBC_REG_ADDR(0x0002C >> PBC_ADDR_SH)
+/*
+ * PBC Board interrupt current status register.
+ */
+#define PBC_INTCURR_STATUS_REG PBC_REG_ADDR(0x00034 >> PBC_ADDR_SH)
+/*
+ * PBC Interrupt mask register set address.
+ */
+#define PBC_INTMASK_SET_REG PBC_REG_ADDR(0x00038 >> PBC_ADDR_SH)
+/*
+ * PBC Interrupt mask register clear address.
+ */
+#define PBC_INTMASK_CLEAR_REG PBC_REG_ADDR(0x0003C >> PBC_ADDR_SH)
+/*
+ * External UART A.
+ */
+#define PBC_SC16C652_UARTA_REG PBC_REG_ADDR(0x20000 >> PBC_ADDR_SH)
+/*
+ * UART 4 Expanding Signal Status.
+ */
+#define PBC_UART_STATUS_REG PBC_REG_ADDR(0x22000 >> PBC_ADDR_SH)
+/*
+ * UART 4 Expanding Signal Control Set.
+ */
+#define PBC_UCTRL_SET_REG PBC_REG_ADDR(0x24000 >> PBC_ADDR_SH)
+/*
+ * UART 4 Expanding Signal Control Clear.
+ */
+#define PBC_UCTRL_CLR_REG PBC_REG_ADDR(0x26000 >> PBC_ADDR_SH)
+/*
+ * Ethernet Controller IO base address.
+ */
+#define PBC_CS8900A_IOBASE_REG PBC_REG_ADDR(0x40000 >> PBC_ADDR_SH)
+/*
+ * Ethernet Controller Memory base address.
+ */
+#define PBC_CS8900A_MEMBASE_REG PBC_REG_ADDR(0x42000 >> PBC_ADDR_SH)
+/*
+ * Ethernet Controller DMA base address.
+ */
+#define PBC_CS8900A_DMABASE_REG PBC_REG_ADDR(0x44000 >> PBC_ADDR_SH)
+
+/* PBC Board Version Register bit definition */
+#define PBC_VERSION_ADS 0x8000 /* Bit15=1 means version for ads */
+#define PBC_VERSION_EVB_REVB 0x4000 /* BIT14=1 means version for evb revb */
+
+/* PBC Board Control Register 1 bit definitions */
+#define PBC_BCTRL1_ERST 0x0001 /* Ethernet Reset */
+#define PBC_BCTRL1_URST 0x0002 /* Reset External UART controller */
+#define PBC_BCTRL1_FRST 0x0004 /* FEC Reset */
+#define PBC_BCTRL1_ESLEEP 0x0010 /* Enable ethernet Sleep */
+#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */
+
+/* PBC Board Control Register 2 bit definitions */
+#define PBC_BCTRL2_VCC_EN 0x0004 /* Enable VCC */
+#define PBC_BCTRL2_VPP_EN 0x0008 /* Enable Vpp */
+#define PBC_BCTRL2_ATAFEC_EN 0X0010
+#define PBC_BCTRL2_ATAFEC_SEL 0X0020
+#define PBC_BCTRL2_ATA_EN 0X0040
+#define PBC_BCTRL2_IRDA_SD 0X0080
+#define PBC_BCTRL2_IRDA_EN 0X0100
+#define PBC_BCTRL2_CCTL10 0X0200
+#define PBC_BCTRL2_CCTL11 0X0400
+
+/* PBC Board Control Register 3 bit definitions */
+#define PBC_BCTRL3_HSH_EN 0X0020
+#define PBC_BCTRL3_FSH_MOD 0X0040
+#define PBC_BCTRL3_OTG_HS_EN 0X0080
+#define PBC_BCTRL3_OTG_VBUS_EN 0X0100
+#define PBC_BCTRL3_FSH_VBUS_EN 0X0200
+#define PBC_BCTRL3_USB_OTG_ON 0X0800
+#define PBC_BCTRL3_USB_FSH_ON 0X1000
+
+/* PBC Board Control Register 4 bit definitions */
+#define PBC_BCTRL4_REGEN_SEL 0X0001
+#define PBC_BCTRL4_USER_OFF 0X0002
+#define PBC_BCTRL4_VIB_EN 0X0004
+#define PBC_BCTRL4_PWRGT1_EN 0X0008
+#define PBC_BCTRL4_PWRGT2_EN 0X0010
+#define PBC_BCTRL4_STDBY_PRI 0X0020
+
+#ifndef __ASSEMBLY__
+/*
+ * Enumerations for SD cards and memory stick card. This corresponds to
+ * the card EN bits in the IMR: SD1_EN | MS_EN | SD3_EN | SD2_EN.
+ */
+enum mxc_card_no {
+ MXC_CARD_SD2 = 0,
+ MXC_CARD_SD3,
+ MXC_CARD_MS,
+ MXC_CARD_SD1,
+ MXC_CARD_MIN = MXC_CARD_SD2,
+ MXC_CARD_MAX = MXC_CARD_SD1,
+};
+#endif
+
+#define MXC_CPLD_VER_1_50 0x01
+
+/*
+ * PBC BSTAT Register bit definitions
+ */
+#define PBC_BSTAT_PRI_INT 0X0001
+#define PBC_BSTAT_USB_BYP 0X0002
+#define PBC_BSTAT_ATA_IOCS16 0X0004
+#define PBC_BSTAT_ATA_CBLID 0X0008
+#define PBC_BSTAT_ATA_DASP 0X0010
+#define PBC_BSTAT_PWR_RDY 0X0020
+#define PBC_BSTAT_SD3_WP 0X0100
+#define PBC_BSTAT_SD2_WP 0X0200
+#define PBC_BSTAT_SD1_WP 0X0400
+#define PBC_BSTAT_SD3_DET 0X0800
+#define PBC_BSTAT_SD2_DET 0X1000
+#define PBC_BSTAT_SD1_DET 0X2000
+#define PBC_BSTAT_MS_DET 0X4000
+#define PBC_BSTAT_SD3_DET_BIT 11
+#define PBC_BSTAT_SD2_DET_BIT 12
+#define PBC_BSTAT_SD1_DET_BIT 13
+#define PBC_BSTAT_MS_DET_BIT 14
+#define MXC_BSTAT_BIT(n) ((n == MXC_CARD_SD2) ? PBC_BSTAT_SD2_DET : \
+ ((n == MXC_CARD_SD3) ? PBC_BSTAT_SD3_DET : \
+ ((n == MXC_CARD_SD1) ? PBC_BSTAT_SD1_DET : \
+ ((n == MXC_CARD_MS) ? PBC_BSTAT_MS_DET : \
+ 0x0))))
+
+/*
+ * PBC UART Control Register bit definitions
+ */
+#define PBC_UCTRL_DCE_DCD 0X0001
+#define PBC_UCTRL_DCE_DSR 0X0002
+#define PBC_UCTRL_DCE_RI 0X0004
+#define PBC_UCTRL_DTE_DTR 0X0100
+
+/*
+ * PBC UART Status Register bit definitions
+ */
+#define PBC_USTAT_DTE_DCD 0X0001
+#define PBC_USTAT_DTE_DSR 0X0002
+#define PBC_USTAT_DTE_RI 0X0004
+#define PBC_USTAT_DCE_DTR 0X0100
+
+/*
+ * PBC Interupt mask register bit definitions
+ */
+#define PBC_INTR_SD3_R_EN_BIT 4
+#define PBC_INTR_SD2_R_EN_BIT 0
+#define PBC_INTR_SD1_R_EN_BIT 6
+#define PBC_INTR_MS_R_EN_BIT 5
+#define PBC_INTR_SD3_EN_BIT 13
+#define PBC_INTR_SD2_EN_BIT 12
+#define PBC_INTR_MS_EN_BIT 14
+#define PBC_INTR_SD1_EN_BIT 15
+
+#define PBC_INTR_SD2_R_EN 0x0001
+#define PBC_INTR_LOW_BAT 0X0002
+#define PBC_INTR_OTG_FSOVER 0X0004
+#define PBC_INTR_FSH_OVER 0X0008
+#define PBC_INTR_SD3_R_EN 0x0010
+#define PBC_INTR_MS_R_EN 0x0020
+#define PBC_INTR_SD1_R_EN 0x0040
+#define PBC_INTR_FEC_INT 0X0080
+#define PBC_INTR_ENET_INT 0X0100
+#define PBC_INTR_OTGFS_INT 0X0200
+#define PBC_INTR_XUART_INT 0X0400
+#define PBC_INTR_CCTL12 0X0800
+#define PBC_INTR_SD2_EN 0x1000
+#define PBC_INTR_SD3_EN 0x2000
+#define PBC_INTR_MS_EN 0x4000
+#define PBC_INTR_SD1_EN 0x8000
+
+
+
+/* For interrupts like xuart, enet etc */
+#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX27_PIN_TIN)
+#define MXC_MAX_EXP_IO_LINES 16
+
+/*
+ * This corresponds to PBC_INTMASK_SET_REG at offset 0x38.
+ *
+ */
+#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 1)
+#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2)
+#define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3)
+#define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4)
+#define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5)
+#define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6)
+#define EXPIO_INT_FEC (MXC_EXP_IO_BASE + 7)
+#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8)
+#define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9)
+#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10)
+#define EXPIO_INT_CCTL12_INT (MXC_EXP_IO_BASE + 11)
+#define EXPIO_INT_SD2_EN (MXC_EXP_IO_BASE + 12)
+#define EXPIO_INT_SD3_EN (MXC_EXP_IO_BASE + 13)
+#define EXPIO_INT_MS_EN (MXC_EXP_IO_BASE + 14)
+#define EXPIO_INT_SD1_EN (MXC_EXP_IO_BASE + 15)
+
+/*
+ * This is System IRQ used by CS8900A for interrupt generation
+ * taken from platform.h
+ */
+#define CS8900AIRQ EXPIO_INT_ENET_INT
+/* This is I/O Base address used to access registers of CS8900A on MXC ADS */
+#define CS8900A_BASE_ADDRESS (PBC_CS8900A_IOBASE_REG + 0x300)
+
+#define MXC_PMIC_INT_LINE IOMUX_TO_IRQ(MX27_PIN_TOUT)
+
+/*
+* This is used to detect if the CPLD version is for mx27 evb board rev-a
+*/
+#define PBC_CPLD_VERSION_IS_REVA() \
+ ((__raw_readw(PBC_VERSION_REG) & \
+ (PBC_VERSION_ADS | PBC_VERSION_EVB_REVB))\
+ == 0)
+
+/* This is used to active or inactive ata signal in CPLD .
+ * It is dependent with hardware
+ */
+#define PBC_ATA_SIGNAL_ACTIVE() \
+ __raw_writew( \
+ PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \
+ PBC_BCTRL2_CLEAR_REG)
+
+#define PBC_ATA_SIGNAL_INACTIVE() \
+ __raw_writew( \
+ PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \
+ PBC_BCTRL2_SET_REG)
+
+#define MXC_BD_LED1 (1 << 5)
+#define MXC_BD_LED2 (1 << 6)
+#define MXC_BD_LED_ON(led) \
+ __raw_writew(led, PBC_BCTRL1_SET_REG)
+#define MXC_BD_LED_OFF(led) \
+ __raw_writew(led, PBC_BCTRL1_CLEAR_REG)
+
+/* to determine the correct external crystal reference */
+#define CKIH_27MHZ_BIT_SET (1 << 3)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX27ADS_H__ */
diff --git a/include/asm-arm/arch-mxc/board-mx31ads.h b/include/asm-arm/arch-mxc/board-mx31ads.h
index 8590127760a8..1bc6fb0f9a83 100644
--- a/include/asm-arm/arch-mxc/board-mx31ads.h
+++ b/include/asm-arm/arch-mxc/board-mx31ads.h
@@ -109,4 +109,9 @@
#define MXC_MAX_EXP_IO_LINES 16
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/include/asm-arm/arch-mxc/board-mx31lite.h b/include/asm-arm/arch-mxc/board-mx31lite.h
new file mode 100644
index 000000000000..e4e5cf5ad7db
--- /dev/null
+++ b/include/asm-arm/arch-mxc/board-mx31lite.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
+#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
+
+#define MXC_MAX_EXP_IO_LINES 16
+
+
+/*
+ * Memory Size parameters
+ */
+
+/*
+ * Size of SDRAM memory
+ */
+#define SDRAM_MEM_SIZE SZ_128M
+/*
+ * Size of MBX buffer memory
+ */
+#define MXC_MBX_MEM_SIZE SZ_16M
+/*
+ * Size of memory available to kernel
+ */
+#define MEM_SIZE (SDRAM_MEM_SIZE - MXC_MBX_MEM_SIZE)
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
+
diff --git a/include/asm-arm/arch-mxc/board-pcm037.h b/include/asm-arm/arch-mxc/board-pcm037.h
new file mode 100644
index 000000000000..82232ba3c8fc
--- /dev/null
+++ b/include/asm-arm/arch-mxc/board-pcm037.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2008 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
+#define __ASM_ARCH_MXC_BOARD_PCM037_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */
diff --git a/include/asm-arm/arch-mxc/board-pcm038.h b/include/asm-arm/arch-mxc/board-pcm038.h
new file mode 100644
index 000000000000..750c62afd90f
--- /dev/null
+++ b/include/asm-arm/arch-mxc/board-pcm038.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
+#define __ASM_ARCH_MXC_BOARD_PCM038_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000)
+
+#ifndef __ASSEMBLY__
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ * TODO: Add your own baseboard init function and call it from
+ * inside pcm038_init().
+ *
+ * This example here is for the development board. Refer pcm970-baseboard.c
+ */
+
+extern void pcm970_baseboard_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_PCM038_H__ */
diff --git a/include/asm-arm/arch-mxc/clock.h b/include/asm-arm/arch-mxc/clock.h
new file mode 100644
index 000000000000..24caa2b7c91d
--- /dev/null
+++ b/include/asm-arm/arch-mxc/clock.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_CLOCK_H__
+#define __ASM_ARCH_MXC_CLOCK_H__
+
+#ifndef __ASSEMBLY__
+#include <linux/list.h>
+
+struct module;
+
+struct clk {
+ struct list_head node;
+ struct module *owner;
+ const char *name;
+ int id;
+ /* Source clock this clk depends on */
+ struct clk *parent;
+ /* Secondary clock to enable/disable with this clock */
+ struct clk *secondary;
+ /* Reference count of clock enable/disable */
+ __s8 usecount;
+ /* Register bit position for clock's enable/disable control. */
+ u8 enable_shift;
+ /* Register address for clock's enable/disable control. */
+ u32 enable_reg;
+ u32 flags;
+ /* get the current clock rate (always a fresh value) */
+ unsigned long (*get_rate) (struct clk *);
+ /* Function ptr to set the clock to a new rate. The rate must match a
+ supported rate returned from round_rate. Leave blank if clock is not
+ programmable */
+ int (*set_rate) (struct clk *, unsigned long);
+ /* Function ptr to round the requested clock rate to the nearest
+ supported rate that is less than or equal to the requested rate. */
+ unsigned long (*round_rate) (struct clk *, unsigned long);
+ /* Function ptr to enable the clock. Leave blank if clock can not
+ be gated. */
+ int (*enable) (struct clk *);
+ /* Function ptr to disable the clock. Leave blank if clock can not
+ be gated. */
+ void (*disable) (struct clk *);
+ /* Function ptr to set the parent clock of the clock. */
+ int (*set_parent) (struct clk *, struct clk *);
+};
+
+int clk_register(struct clk *clk);
+void clk_unregister(struct clk *clk);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
diff --git a/include/asm-arm/arch-mxc/common.h b/include/asm-arm/arch-mxc/common.h
index 23b4350edbd6..a6d2e24aab15 100644
--- a/include/asm-arm/arch-mxc/common.h
+++ b/include/asm-arm/arch-mxc/common.h
@@ -11,10 +11,10 @@
#ifndef __ASM_ARCH_MXC_COMMON_H__
#define __ASM_ARCH_MXC_COMMON_H__
-struct sys_timer;
-
extern void mxc_map_io(void);
extern void mxc_init_irq(void);
-extern struct sys_timer mxc_timer;
+extern void mxc_timer_init(const char *clk_timer);
+extern int mxc_clocks_init(unsigned long fref);
+extern int mxc_register_gpios(void);
#endif
diff --git a/include/asm-arm/arch-mxc/debug-macro.S b/include/asm-arm/arch-mxc/debug-macro.S
new file mode 100644
index 000000000000..575087f8561a
--- /dev/null
+++ b/include/asm-arm/arch-mxc/debug-macro.S
@@ -0,0 +1,49 @@
+/* linux/include/asm-arm/arch-imx/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <asm/arch/hardware.h>
+
+#ifdef CONFIG_MACH_MX31ADS
+#include <asm/arch/board-mx31ads.h>
+#endif
+#ifdef CONFIG_MACH_PCM037
+#include <asm/arch/board-pcm037.h>
+#endif
+#ifdef CONFIG_MACH_MX31LITE
+#include <asm/arch/board-mx31lite.h>
+#endif
+#ifdef CONFIG_MACH_MX27ADS
+#include <asm/arch/board-mx27ads.h>
+#endif
+#ifdef CONFIG_MACH_PCM038
+#include <asm/arch/board-pcm038.h>
+#endif
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =MXC_LL_UART_PADDR @ physical
+ ldrne \rx, =MXC_LL_UART_VADDR @ virtual
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #0x40] @ TXDATA
+ .endm
+
+ .macro waituart,rd,rx
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #0x98] @ SR2
+ tst \rd, #1 << 3 @ TXDC
+ beq 1002b @ wait until transmit done
+ .endm
diff --git a/include/asm-arm/arch-mxc/gpio.h b/include/asm-arm/arch-mxc/gpio.h
new file mode 100644
index 000000000000..d393e15f5a6b
--- /dev/null
+++ b/include/asm-arm/arch-mxc/gpio.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_GPIO_H__
+#define __ASM_ARCH_MXC_GPIO_H__
+
+#include <asm/hardware.h>
+#include <asm-generic/gpio.h>
+
+/* use gpiolib dispatchers */
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+
+#define gpio_to_irq(gpio) (MXC_MAX_INT_LINES + (gpio))
+#define irq_to_gpio(irq) ((irq) - MXC_MAX_INT_LINES)
+
+struct mxc_gpio_port {
+ void __iomem *base;
+ int irq;
+ int virtual_irq_start;
+ struct gpio_chip chip;
+};
+
+int mxc_gpio_init(struct mxc_gpio_port*, int);
+
+#endif
diff --git a/include/asm-arm/arch-mxc/hardware.h b/include/asm-arm/arch-mxc/hardware.h
index e87ff0679d5e..37cddbaaade7 100644
--- a/include/asm-arm/arch-mxc/hardware.h
+++ b/include/asm-arm/arch-mxc/hardware.h
@@ -1,11 +1,20 @@
/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
*/
#ifndef __ASM_ARCH_MXC_HARDWARE_H__
@@ -17,15 +26,12 @@
# include <asm/arch/mx31.h>
#endif
-#include <asm/arch/mxc.h>
-
-/*
- * ---------------------------------------------------------------------------
- * Board specific defines
- * ---------------------------------------------------------------------------
- */
-#ifdef CONFIG_MACH_MX31ADS
-# include <asm/arch/board-mx31ads.h>
+#ifdef CONFIG_ARCH_MX2
+# ifdef CONFIG_MACH_MX27
+# include <asm/arch/mx27.h>
+# endif
#endif
+#include <asm/arch/mxc.h>
+
#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/include/asm-arm/arch-mxc/iim.h b/include/asm-arm/arch-mxc/iim.h
new file mode 100644
index 000000000000..315bffadafda
--- /dev/null
+++ b/include/asm-arm/arch-mxc/iim.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_IIM_H__
+#define __ASM_ARCH_MXC_IIM_H__
+
+/* Register offsets */
+#define MXC_IIMSTAT 0x0000
+#define MXC_IIMSTATM 0x0004
+#define MXC_IIMERR 0x0008
+#define MXC_IIMEMASK 0x000C
+#define MXC_IIMFCTL 0x0010
+#define MXC_IIMUA 0x0014
+#define MXC_IIMLA 0x0018
+#define MXC_IIMSDAT 0x001C
+#define MXC_IIMPREV 0x0020
+#define MXC_IIMSREV 0x0024
+#define MXC_IIMPRG_P 0x0028
+#define MXC_IIMSCS0 0x002C
+#define MXC_IIMSCS1 0x0030
+#define MXC_IIMSCS2 0x0034
+#define MXC_IIMSCS3 0x0038
+#define MXC_IIMFBAC0 0x0800
+#define MXC_IIMJAC 0x0804
+#define MXC_IIMHWV1 0x0808
+#define MXC_IIMHWV2 0x080C
+#define MXC_IIMHAB0 0x0810
+#define MXC_IIMHAB1 0x0814
+/* Definitions for i.MX27 TO2 */
+#define MXC_IIMMAC 0x0814
+#define MXC_IIMPREV_FUSE 0x0818
+#define MXC_IIMSREV_FUSE 0x081C
+#define MXC_IIMSJC_CHALL_0 0x0820
+#define MXC_IIMSJC_CHALL_7 0x083C
+#define MXC_IIMFB0UC17 0x0840
+#define MXC_IIMFB0UC255 0x0BFC
+#define MXC_IIMFBAC1 0x0C00
+/* Definitions for i.MX27 TO2 */
+#define MXC_IIMSUID 0x0C04
+#define MXC_IIMKEY0 0x0C04
+#define MXC_IIMKEY20 0x0C54
+#define MXC_IIMSJC_RESP_0 0x0C58
+#define MXC_IIMSJC_RESP_7 0x0C74
+#define MXC_IIMFB1UC30 0x0C78
+#define MXC_IIMFB1UC255 0x0FFC
+
+/* Bit definitions */
+
+#define MXC_IIMHWV1_WLOCK (0x1 << 7)
+#define MXC_IIMHWV1_MCU_ENDIAN (0x1 << 6)
+#define MXC_IIMHWV1_DSP_ENDIAN (0x1 << 5)
+#define MXC_IIMHWV1_BOOT_INT (0x1 << 4)
+#define MXC_IIMHWV1_SCC_DISABLE (0x1 << 3)
+#define MXC_IIMHWV1_HANTRO_DISABLE (0x1 << 2)
+#define MXC_IIMHWV1_MEMSTICK_DIS (0x1 << 1)
+
+#define MXC_IIMHWV2_WLOCK (0x1 << 7)
+#define MXC_IIMHWV2_BP_SDMA (0x1 << 6)
+#define MXC_IIMHWV2_SCM_DCM (0x1 << 5)
+
+#endif /* __ASM_ARCH_MXC_IIM_H__ */
diff --git a/include/asm-arm/arch-mxc/imx-uart.h b/include/asm-arm/arch-mxc/imx-uart.h
new file mode 100644
index 000000000000..83fb72c4048a
--- /dev/null
+++ b/include/asm-arm/arch-mxc/imx-uart.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef ASMARM_ARCH_UART_H
+#define ASMARM_ARCH_UART_H
+
+#define IMXUART_HAVE_RTSCTS (1<<0)
+
+struct imxuart_platform_data {
+ int (*init)(struct platform_device *pdev);
+ int (*exit)(struct platform_device *pdev);
+ unsigned int flags;
+};
+
+int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata);
+
+#endif
diff --git a/include/asm-arm/arch-mxc/iomux-mx1-mx2.h b/include/asm-arm/arch-mxc/iomux-mx1-mx2.h
new file mode 100644
index 000000000000..076d37b38eb2
--- /dev/null
+++ b/include/asm-arm/arch-mxc/iomux-mx1-mx2.h
@@ -0,0 +1,372 @@
+/*
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef _MXC_GPIO_MX1_MX2_H
+#define _MXC_GPIO_MX1_MX2_H
+
+#include <linux/io.h>
+
+#define MXC_GPIO_ALLOC_MODE_NORMAL 0
+#define MXC_GPIO_ALLOC_MODE_NO_ALLOC 1
+#define MXC_GPIO_ALLOC_MODE_TRY_ALLOC 2
+#define MXC_GPIO_ALLOC_MODE_ALLOC_ONLY 4
+#define MXC_GPIO_ALLOC_MODE_RELEASE 8
+
+/*
+ * GPIO Module and I/O Multiplexer
+ * x = 0..3 for reg_A, reg_B, reg_C, reg_D
+ */
+#define VA_GPIO_BASE IO_ADDRESS(GPIO_BASE_ADDR)
+#define MXC_DDIR(x) (0x00 + ((x) << 8))
+#define MXC_OCR1(x) (0x04 + ((x) << 8))
+#define MXC_OCR2(x) (0x08 + ((x) << 8))
+#define MXC_ICONFA1(x) (0x0c + ((x) << 8))
+#define MXC_ICONFA2(x) (0x10 + ((x) << 8))
+#define MXC_ICONFB1(x) (0x14 + ((x) << 8))
+#define MXC_ICONFB2(x) (0x18 + ((x) << 8))
+#define MXC_DR(x) (0x1c + ((x) << 8))
+#define MXC_GIUS(x) (0x20 + ((x) << 8))
+#define MXC_SSR(x) (0x24 + ((x) << 8))
+#define MXC_ICR1(x) (0x28 + ((x) << 8))
+#define MXC_ICR2(x) (0x2c + ((x) << 8))
+#define MXC_IMR(x) (0x30 + ((x) << 8))
+#define MXC_ISR(x) (0x34 + ((x) << 8))
+#define MXC_GPR(x) (0x38 + ((x) << 8))
+#define MXC_SWR(x) (0x3c + ((x) << 8))
+#define MXC_PUEN(x) (0x40 + ((x) << 8))
+
+#ifdef CONFIG_ARCH_MX1
+# define GPIO_PORT_MAX 3
+#endif
+#ifdef CONFIG_ARCH_MX2
+# define GPIO_PORT_MAX 5
+#endif
+
+#ifndef GPIO_PORT_MAX
+# error "GPIO config port count unknown!"
+#endif
+
+#define GPIO_PIN_MASK 0x1f
+
+#define GPIO_PORT_SHIFT 5
+#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
+
+#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
+#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
+#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
+#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
+#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
+#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
+
+#define GPIO_OUT (1 << 8)
+#define GPIO_IN (0 << 8)
+#define GPIO_PUEN (1 << 9)
+
+#define GPIO_PF (1 << 10)
+#define GPIO_AF (1 << 11)
+
+#define GPIO_OCR_SHIFT 12
+#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT)
+#define GPIO_AIN (0 << GPIO_OCR_SHIFT)
+#define GPIO_BIN (1 << GPIO_OCR_SHIFT)
+#define GPIO_CIN (2 << GPIO_OCR_SHIFT)
+#define GPIO_GPIO (3 << GPIO_OCR_SHIFT)
+
+#define GPIO_AOUT_SHIFT 14
+#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT)
+
+#define GPIO_BOUT_SHIFT 16
+#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT)
+
+extern void mxc_gpio_mode(int gpio_mode);
+extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+ int alloc_mode, const char *label);
+
+/*-------------------------------------------------------------------------*/
+
+/* assignements for GPIO alternate/primary functions */
+
+/* FIXME: This list is not completed. The correct directions are
+ * missing on some (many) pins
+ */
+#ifdef CONFIG_ARCH_MX1
+#define PA0_AIN_SPI2_CLK (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0)
+#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0)
+#define PA1_AOUT_SPI2_RXD (GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1)
+#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 2)
+#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4)
+#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5)
+#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6)
+#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7)
+#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8)
+#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9)
+#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10)
+#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11)
+#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12)
+#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13)
+#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14)
+#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15)
+#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16)
+#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17)
+#define PA17_AIN_SPI2_SS (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17)
+#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18)
+#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19)
+#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20)
+#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21)
+#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22)
+#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23)
+#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24)
+#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24)
+#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25)
+#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25)
+#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26)
+#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26)
+#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27)
+#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27)
+#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28)
+#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28)
+#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29)
+#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29)
+#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30)
+#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30)
+#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31)
+#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31)
+#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
+#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8)
+#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
+#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9)
+#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
+#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10)
+#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11)
+#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11)
+#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12)
+#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12)
+#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
+#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13)
+#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14)
+#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15)
+#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_IN | GPIO_AF | 16)
+#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_OUT | GPIO_AF | 17)
+#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18)
+#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19)
+#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20)
+#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21)
+#define PB22_PFUSBD_RCV (GPIO_PORTB | GPIO_PF | 22)
+#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24)
+#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25)
+#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_OUT | GPIO_PF | 28)
+#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_IN | GPIO_PF | 29)
+#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_OUT | GPIO_PF | 30)
+#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_IN | GPIO_PF | 31)
+#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3)
+#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4)
+#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_IN | GPIO_PF | 5)
+#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_OUT | GPIO_PF | 6)
+#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7)
+#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8)
+#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_OUT | GPIO_PF | 9)
+#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_IN | GPIO_PF | 10)
+#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_OUT | GPIO_PF | 11)
+#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 12)
+#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13)
+#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14)
+#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15)
+#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16)
+#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17)
+#define PC24_BIN_UART3_RI (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24)
+#define PC25_BIN_UART3_DSR (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25)
+#define PC26_AOUT_UART3_DTR (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26)
+#define PC27_BIN_UART3_DCD (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27)
+#define PC28_BIN_UART3_CTS (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28)
+#define PC29_AOUT_UART3_RTS (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29)
+#define PC30_BIN_UART3_TX (GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30)
+#define PC31_AOUT_UART3_RX (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
+#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 6)
+#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7)
+#define PD7_AF_UART2_DTR (GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7)
+#define PD7_AIN_SPI2_SCLK (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7)
+#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8)
+#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_OUT | GPIO_AF | 8)
+#define PD8_AIN_SPI2_SS (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8)
+#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9)
+#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_OUT | GPIO_AF | 9)
+#define PD9_AOUT_SPI2_RXD (GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9)
+#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_OUT | GPIO_PF | 10)
+#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_OUT | GPIO_AF | 10)
+#define PD10_AIN_SPI2_TXD (GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10)
+#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_OUT | GPIO_PF | 11)
+#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_OUT | GPIO_PF | 12)
+#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_OUT | GPIO_PF | 13)
+#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_OUT | GPIO_PF | 14)
+#define PD15_PF_LD0 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 15)
+#define PD16_PF_LD1 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 16)
+#define PD17_PF_LD2 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
+#define PD18_PF_LD3 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
+#define PD19_PF_LD4 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 19)
+#define PD20_PF_LD5 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 20)
+#define PD21_PF_LD6 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 21)
+#define PD22_PF_LD7 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 22)
+#define PD23_PF_LD8 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 23)
+#define PD24_PF_LD9 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 24)
+#define PD25_PF_LD10 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25)
+#define PD26_PF_LD11 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26)
+#define PD27_PF_LD12 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27)
+#define PD28_PF_LD13 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28)
+#define PD29_PF_LD14 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29)
+#define PD30_PF_LD15 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 30)
+#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31)
+#define PD31_BIN_SPI2_TXD (GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31)
+#endif
+
+#ifdef CONFIG_ARCH_MX2
+#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_OUT | GPIO_PF | 5)
+#define PA6_PF_LD0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 6)
+#define PA7_PF_LD1 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 7)
+#define PA8_PF_LD2 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 8)
+#define PA9_PF_LD3 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 9)
+#define PA10_PF_LD4 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 10)
+#define PA11_PF_LD5 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 11)
+#define PA12_PF_LD6 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 12)
+#define PA13_PF_LD7 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 13)
+#define PA14_PF_LD8 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 14)
+#define PA15_PF_LD9 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15)
+#define PA16_PF_LD10 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16)
+#define PA17_PF_LD11 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 17)
+#define PA18_PF_LD12 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 18)
+#define PA19_PF_LD13 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 19)
+#define PA20_PF_LD14 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 20)
+#define PA21_PF_LD15 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 21)
+#define PA22_PF_LD16 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 22)
+#define PA23_PF_LD17 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 23)
+#define PA24_PF_REV (GPIO_PORTA | GPIO_OUT | GPIO_PF | 24)
+#define PA25_PF_CLS (GPIO_PORTA | GPIO_OUT | GPIO_PF | 25)
+#define PA26_PF_PS (GPIO_PORTA | GPIO_OUT | GPIO_PF | 26)
+#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_OUT | GPIO_PF | 27)
+#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_OUT | GPIO_PF | 28)
+#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_OUT | GPIO_PF | 29)
+#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_OUT | GPIO_PF | 30)
+#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_OUT | GPIO_PF | 31)
+#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 10)
+#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 10)
+#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 11)
+#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 11)
+#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 12)
+#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 12)
+#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 13)
+#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_IN | GPIO_AF | 13)
+#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 14)
+#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_OUT | GPIO_PF | 15)
+#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_OUT | GPIO_PF | 16)
+#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 17)
+#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 18)
+#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 18)
+#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 19)
+#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 19)
+#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_OUT | GPIO_PF | 20)
+#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 20)
+#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_OUT | GPIO_PF | 21)
+#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_IN | GPIO_AF | 21)
+#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_IN | GPIO_PF | 26)
+#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 28)
+#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 29)
+#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 31)
+#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_IN | GPIO_PF | 5)
+#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_IN | GPIO_PF | 6)
+#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 16)
+#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 17)
+#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 18)
+#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 19)
+#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 20)
+#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 21)
+#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 22)
+#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 23)
+#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 24)
+#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 25)
+#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 26)
+#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 27)
+#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 28)
+#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 29)
+#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 30)
+#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 31)
+#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 0)
+#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 1)
+#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 2)
+#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 3)
+#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 4)
+#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 5)
+#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 6)
+#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 7)
+#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_IN | GPIO_AF | 8)
+#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 9)
+#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 10)
+#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 11)
+#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 12)
+#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 13)
+#define PD14_AOUT_FEC_CLR (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 14)
+#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 15)
+#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 16)
+#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
+#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
+#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25)
+#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26)
+#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27)
+#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28)
+#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29)
+#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_IN | GPIO_PF | 30)
+#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_OUT | GPIO_PF | 31)
+#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_OUT | GPIO_AIN | 23)
+#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 3)
+#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 4)
+#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 6)
+#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 7)
+#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 8)
+#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 9)
+#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 10)
+#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 11)
+#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 12)
+#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 13)
+#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 14)
+#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 15)
+#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_IN | GPIO_AF | 18)
+#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_OUT | GPIO_AF | 21)
+#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_OUT | GPIO_AF | 22)
+#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_OUT | GPIO_AF | 23)
+#endif
+
+/* decode irq number to use with IMR(x), ISR(x) and friends */
+#define IRQ_TO_REG(irq) ((irq - MXC_MAX_INT_LINES) >> 5)
+
+#define IRQ_GPIOA(x) (MXC_MAX_INT_LINES + x)
+#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x)
+#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
+#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x)
+
+#endif /* _MXC_GPIO_MX1_MX2_H */
diff --git a/include/asm-arm/arch-mxc/iomux-mx3.h b/include/asm-arm/arch-mxc/iomux-mx3.h
new file mode 100644
index 000000000000..7509e7692f08
--- /dev/null
+++ b/include/asm-arm/arch-mxc/iomux-mx3.h
@@ -0,0 +1,501 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_MX31_IOMUX_H__
+#define __MACH_MX31_IOMUX_H__
+
+#include <linux/types.h>
+
+/*
+ * various IOMUX output functions
+ */
+
+#define IOMUX_OCONFIG_GPIO (0 << 4) /* used as GPIO */
+#define IOMUX_OCONFIG_FUNC (1 << 4) /* used as function */
+#define IOMUX_OCONFIG_ALT1 (2 << 4) /* used as alternate function 1 */
+#define IOMUX_OCONFIG_ALT2 (3 << 4) /* used as alternate function 2 */
+#define IOMUX_OCONFIG_ALT3 (4 << 4) /* used as alternate function 3 */
+#define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */
+#define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */
+#define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */
+#define IOMUX_ICONFIG_NONE 0 /* not configured for input */
+#define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */
+#define IOMUX_ICONFIG_FUNC 2 /* used as function */
+#define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */
+#define IOMUX_ICONFIG_ALT2 8 /* used as alternate function 2 */
+
+#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO)
+#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC)
+#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1)
+#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2)
+
+/*
+ * various IOMUX pad functions
+ */
+enum iomux_pad_config {
+ PAD_CTL_NOLOOPBACK = 0x0 << 9,
+ PAD_CTL_LOOPBACK = 0x1 << 9,
+ PAD_CTL_PKE_NONE = 0x0 << 8,
+ PAD_CTL_PKE_ENABLE = 0x1 << 8,
+ PAD_CTL_PUE_KEEPER = 0x0 << 7,
+ PAD_CTL_PUE_PUD = 0x1 << 7,
+ PAD_CTL_100K_PD = 0x0 << 5,
+ PAD_CTL_100K_PU = 0x1 << 5,
+ PAD_CTL_47K_PU = 0x2 << 5,
+ PAD_CTL_22K_PU = 0x3 << 5,
+ PAD_CTL_HYS_CMOS = 0x0 << 4,
+ PAD_CTL_HYS_SCHMITZ = 0x1 << 4,
+ PAD_CTL_ODE_CMOS = 0x0 << 3,
+ PAD_CTL_ODE_OpenDrain = 0x1 << 3,
+ PAD_CTL_DRV_NORMAL = 0x0 << 1,
+ PAD_CTL_DRV_HIGH = 0x1 << 1,
+ PAD_CTL_DRV_MAX = 0x2 << 1,
+ PAD_CTL_SRE_SLOW = 0x0 << 0,
+ PAD_CTL_SRE_FAST = 0x1 << 0
+};
+
+/*
+ * various IOMUX general purpose functions
+ */
+enum iomux_gp_func {
+ MUX_PGP_FIRI = 1 << 0,
+ MUX_DDR_MODE = 1 << 1,
+ MUX_PGP_CSPI_BB = 1 << 2,
+ MUX_PGP_ATA_1 = 1 << 3,
+ MUX_PGP_ATA_2 = 1 << 4,
+ MUX_PGP_ATA_3 = 1 << 5,
+ MUX_PGP_ATA_4 = 1 << 6,
+ MUX_PGP_ATA_5 = 1 << 7,
+ MUX_PGP_ATA_6 = 1 << 8,
+ MUX_PGP_ATA_7 = 1 << 9,
+ MUX_PGP_ATA_8 = 1 << 10,
+ MUX_PGP_UH2 = 1 << 11,
+ MUX_SDCTL_CSD0_SEL = 1 << 12,
+ MUX_SDCTL_CSD1_SEL = 1 << 13,
+ MUX_CSPI1_UART3 = 1 << 14,
+ MUX_EXTDMAREQ2_MBX_SEL = 1 << 15,
+ MUX_TAMPER_DETECT_EN = 1 << 16,
+ MUX_PGP_USB_4WIRE = 1 << 17,
+ MUX_PGB_USB_COMMON = 1 << 18,
+ MUX_SDHC_MEMSTICK1 = 1 << 19,
+ MUX_SDHC_MEMSTICK2 = 1 << 20,
+ MUX_PGP_SPLL_BYP = 1 << 21,
+ MUX_PGP_UPLL_BYP = 1 << 22,
+ MUX_PGP_MSHC1_CLK_SEL = 1 << 23,
+ MUX_PGP_MSHC2_CLK_SEL = 1 << 24,
+ MUX_CSPI3_UART5_SEL = 1 << 25,
+ MUX_PGP_ATA_9 = 1 << 26,
+ MUX_PGP_USB_SUSPEND = 1 << 27,
+ MUX_PGP_USB_OTG_LOOPBACK = 1 << 28,
+ MUX_PGP_USB_HS1_LOOPBACK = 1 << 29,
+ MUX_PGP_USB_HS2_LOOPBACK = 1 << 30,
+ MUX_CLKO_DDR_MODE = 1 << 31,
+};
+
+/*
+ * This function enables/disables the general purpose function for a particular
+ * signal.
+ */
+void iomux_config_gpr(enum iomux_gp_func , bool);
+
+/*
+ * set the mode for a IOMUX pin.
+ */
+int mxc_iomux_mode(unsigned int);
+
+/*
+ * This function enables/disables the general purpose function for a particular
+ * signal.
+ */
+void mxc_iomux_set_gpr(enum iomux_gp_func, bool);
+
+#define IOMUX_PADNUM_MASK 0x1ff
+#define IOMUX_GPIONUM_SHIFT 9
+#define IOMUX_GPIONUM_MASK (0xff << IOMUX_GPIONUM_SHIFT)
+#define IOMUX_MODE_SHIFT 17
+#define IOMUX_MODE_MASK (0xff << IOMUX_MODE_SHIFT)
+
+#define IOMUX_PIN(gpionum, padnum) \
+ (((gpionum << IOMUX_GPIONUM_SHIFT) & IOMUX_GPIONUM_MASK) | \
+ (padnum & IOMUX_PADNUM_MASK))
+
+#define IOMUX_MODE(pin, mode) (pin | mode << IOMUX_MODE_SHIFT)
+
+#define IOMUX_TO_GPIO(iomux_pin) \
+ ((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT)
+#define IOMUX_TO_IRQ(iomux_pin) \
+ (((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + \
+ MXC_GPIO_INT_BASE)
+
+/*
+ * This enumeration is constructed based on the Section
+ * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated
+ * value is constructed based on the rules described above.
+ */
+
+enum iomux_pins {
+ MX31_PIN_TTM_PAD = IOMUX_PIN(0xff, 0),
+ MX31_PIN_CSPI3_SPI_RDY = IOMUX_PIN(0xff, 1),
+ MX31_PIN_CSPI3_SCLK = IOMUX_PIN(0xff, 2),
+ MX31_PIN_CSPI3_MISO = IOMUX_PIN(0xff, 3),
+ MX31_PIN_CSPI3_MOSI = IOMUX_PIN(0xff, 4),
+ MX31_PIN_CLKSS = IOMUX_PIN(0xff, 5),
+ MX31_PIN_CE_CONTROL = IOMUX_PIN(0xff, 6),
+ MX31_PIN_ATA_RESET_B = IOMUX_PIN(95, 7),
+ MX31_PIN_ATA_DMACK = IOMUX_PIN(94, 8),
+ MX31_PIN_ATA_DIOW = IOMUX_PIN(93, 9),
+ MX31_PIN_ATA_DIOR = IOMUX_PIN(92, 10),
+ MX31_PIN_ATA_CS1 = IOMUX_PIN(91, 11),
+ MX31_PIN_ATA_CS0 = IOMUX_PIN(90, 12),
+ MX31_PIN_SD1_DATA3 = IOMUX_PIN(63, 13),
+ MX31_PIN_SD1_DATA2 = IOMUX_PIN(62, 14),
+ MX31_PIN_SD1_DATA1 = IOMUX_PIN(61, 15),
+ MX31_PIN_SD1_DATA0 = IOMUX_PIN(60, 16),
+ MX31_PIN_SD1_CLK = IOMUX_PIN(59, 17),
+ MX31_PIN_SD1_CMD = IOMUX_PIN(58, 18),
+ MX31_PIN_D3_SPL = IOMUX_PIN(0xff, 19),
+ MX31_PIN_D3_CLS = IOMUX_PIN(0xff, 20),
+ MX31_PIN_D3_REV = IOMUX_PIN(0xff, 21),
+ MX31_PIN_CONTRAST = IOMUX_PIN(0xff, 22),
+ MX31_PIN_VSYNC3 = IOMUX_PIN(0xff, 23),
+ MX31_PIN_READ = IOMUX_PIN(0xff, 24),
+ MX31_PIN_WRITE = IOMUX_PIN(0xff, 25),
+ MX31_PIN_PAR_RS = IOMUX_PIN(0xff, 26),
+ MX31_PIN_SER_RS = IOMUX_PIN(89, 27),
+ MX31_PIN_LCS1 = IOMUX_PIN(88, 28),
+ MX31_PIN_LCS0 = IOMUX_PIN(87, 29),
+ MX31_PIN_SD_D_CLK = IOMUX_PIN(86, 30),
+ MX31_PIN_SD_D_IO = IOMUX_PIN(85, 31),
+ MX31_PIN_SD_D_I = IOMUX_PIN(84, 32),
+ MX31_PIN_DRDY0 = IOMUX_PIN(0xff, 33),
+ MX31_PIN_FPSHIFT = IOMUX_PIN(0xff, 34),
+ MX31_PIN_HSYNC = IOMUX_PIN(0xff, 35),
+ MX31_PIN_VSYNC0 = IOMUX_PIN(0xff, 36),
+ MX31_PIN_LD17 = IOMUX_PIN(0xff, 37),
+ MX31_PIN_LD16 = IOMUX_PIN(0xff, 38),
+ MX31_PIN_LD15 = IOMUX_PIN(0xff, 39),
+ MX31_PIN_LD14 = IOMUX_PIN(0xff, 40),
+ MX31_PIN_LD13 = IOMUX_PIN(0xff, 41),
+ MX31_PIN_LD12 = IOMUX_PIN(0xff, 42),
+ MX31_PIN_LD11 = IOMUX_PIN(0xff, 43),
+ MX31_PIN_LD10 = IOMUX_PIN(0xff, 44),
+ MX31_PIN_LD9 = IOMUX_PIN(0xff, 45),
+ MX31_PIN_LD8 = IOMUX_PIN(0xff, 46),
+ MX31_PIN_LD7 = IOMUX_PIN(0xff, 47),
+ MX31_PIN_LD6 = IOMUX_PIN(0xff, 48),
+ MX31_PIN_LD5 = IOMUX_PIN(0xff, 49),
+ MX31_PIN_LD4 = IOMUX_PIN(0xff, 50),
+ MX31_PIN_LD3 = IOMUX_PIN(0xff, 51),
+ MX31_PIN_LD2 = IOMUX_PIN(0xff, 52),
+ MX31_PIN_LD1 = IOMUX_PIN(0xff, 53),
+ MX31_PIN_LD0 = IOMUX_PIN(0xff, 54),
+ MX31_PIN_USBH2_DATA1 = IOMUX_PIN(0xff, 55),
+ MX31_PIN_USBH2_DATA0 = IOMUX_PIN(0xff, 56),
+ MX31_PIN_USBH2_NXT = IOMUX_PIN(0xff, 57),
+ MX31_PIN_USBH2_STP = IOMUX_PIN(0xff, 58),
+ MX31_PIN_USBH2_DIR = IOMUX_PIN(0xff, 59),
+ MX31_PIN_USBH2_CLK = IOMUX_PIN(0xff, 60),
+ MX31_PIN_USBOTG_DATA7 = IOMUX_PIN(0xff, 61),
+ MX31_PIN_USBOTG_DATA6 = IOMUX_PIN(0xff, 62),
+ MX31_PIN_USBOTG_DATA5 = IOMUX_PIN(0xff, 63),
+ MX31_PIN_USBOTG_DATA4 = IOMUX_PIN(0xff, 64),
+ MX31_PIN_USBOTG_DATA3 = IOMUX_PIN(0xff, 65),
+ MX31_PIN_USBOTG_DATA2 = IOMUX_PIN(0xff, 66),
+ MX31_PIN_USBOTG_DATA1 = IOMUX_PIN(0xff, 67),
+ MX31_PIN_USBOTG_DATA0 = IOMUX_PIN(0xff, 68),
+ MX31_PIN_USBOTG_NXT = IOMUX_PIN(0xff, 69),
+ MX31_PIN_USBOTG_STP = IOMUX_PIN(0xff, 70),
+ MX31_PIN_USBOTG_DIR = IOMUX_PIN(0xff, 71),
+ MX31_PIN_USBOTG_CLK = IOMUX_PIN(0xff, 72),
+ MX31_PIN_USB_BYP = IOMUX_PIN(31, 73),
+ MX31_PIN_USB_OC = IOMUX_PIN(30, 74),
+ MX31_PIN_USB_PWR = IOMUX_PIN(29, 75),
+ MX31_PIN_SJC_MOD = IOMUX_PIN(0xff, 76),
+ MX31_PIN_DE_B = IOMUX_PIN(0xff, 77),
+ MX31_PIN_TRSTB = IOMUX_PIN(0xff, 78),
+ MX31_PIN_TDO = IOMUX_PIN(0xff, 79),
+ MX31_PIN_TDI = IOMUX_PIN(0xff, 80),
+ MX31_PIN_TMS = IOMUX_PIN(0xff, 81),
+ MX31_PIN_TCK = IOMUX_PIN(0xff, 82),
+ MX31_PIN_RTCK = IOMUX_PIN(0xff, 83),
+ MX31_PIN_KEY_COL7 = IOMUX_PIN(57, 84),
+ MX31_PIN_KEY_COL6 = IOMUX_PIN(56, 85),
+ MX31_PIN_KEY_COL5 = IOMUX_PIN(55, 86),
+ MX31_PIN_KEY_COL4 = IOMUX_PIN(54, 87),
+ MX31_PIN_KEY_COL3 = IOMUX_PIN(0xff, 88),
+ MX31_PIN_KEY_COL2 = IOMUX_PIN(0xff, 89),
+ MX31_PIN_KEY_COL1 = IOMUX_PIN(0xff, 90),
+ MX31_PIN_KEY_COL0 = IOMUX_PIN(0xff, 91),
+ MX31_PIN_KEY_ROW7 = IOMUX_PIN(53, 92),
+ MX31_PIN_KEY_ROW6 = IOMUX_PIN(52, 93),
+ MX31_PIN_KEY_ROW5 = IOMUX_PIN(51, 94),
+ MX31_PIN_KEY_ROW4 = IOMUX_PIN(50, 95),
+ MX31_PIN_KEY_ROW3 = IOMUX_PIN(0xff, 96),
+ MX31_PIN_KEY_ROW2 = IOMUX_PIN(0xff, 97),
+ MX31_PIN_KEY_ROW1 = IOMUX_PIN(0xff, 98),
+ MX31_PIN_KEY_ROW0 = IOMUX_PIN(0xff, 99),
+ MX31_PIN_BATT_LINE = IOMUX_PIN(49, 100),
+ MX31_PIN_CTS2 = IOMUX_PIN(0xff, 101),
+ MX31_PIN_RTS2 = IOMUX_PIN(0xff, 102),
+ MX31_PIN_TXD2 = IOMUX_PIN(28, 103),
+ MX31_PIN_RXD2 = IOMUX_PIN(27, 104),
+ MX31_PIN_DTR_DCE2 = IOMUX_PIN(48, 105),
+ MX31_PIN_DCD_DTE1 = IOMUX_PIN(47, 106),
+ MX31_PIN_RI_DTE1 = IOMUX_PIN(46, 107),
+ MX31_PIN_DSR_DTE1 = IOMUX_PIN(45, 108),
+ MX31_PIN_DTR_DTE1 = IOMUX_PIN(44, 109),
+ MX31_PIN_DCD_DCE1 = IOMUX_PIN(43, 110),
+ MX31_PIN_RI_DCE1 = IOMUX_PIN(42, 111),
+ MX31_PIN_DSR_DCE1 = IOMUX_PIN(41, 112),
+ MX31_PIN_DTR_DCE1 = IOMUX_PIN(40, 113),
+ MX31_PIN_CTS1 = IOMUX_PIN(39, 114),
+ MX31_PIN_RTS1 = IOMUX_PIN(38, 115),
+ MX31_PIN_TXD1 = IOMUX_PIN(37, 116),
+ MX31_PIN_RXD1 = IOMUX_PIN(36, 117),
+ MX31_PIN_CSPI2_SPI_RDY = IOMUX_PIN(0xff, 118),
+ MX31_PIN_CSPI2_SCLK = IOMUX_PIN(0xff, 119),
+ MX31_PIN_CSPI2_SS2 = IOMUX_PIN(0xff, 120),
+ MX31_PIN_CSPI2_SS1 = IOMUX_PIN(0xff, 121),
+ MX31_PIN_CSPI2_SS0 = IOMUX_PIN(0xff, 122),
+ MX31_PIN_CSPI2_MISO = IOMUX_PIN(0xff, 123),
+ MX31_PIN_CSPI2_MOSI = IOMUX_PIN(0xff, 124),
+ MX31_PIN_CSPI1_SPI_RDY = IOMUX_PIN(0xff, 125),
+ MX31_PIN_CSPI1_SCLK = IOMUX_PIN(0xff, 126),
+ MX31_PIN_CSPI1_SS2 = IOMUX_PIN(0xff, 127),
+ MX31_PIN_CSPI1_SS1 = IOMUX_PIN(0xff, 128),
+ MX31_PIN_CSPI1_SS0 = IOMUX_PIN(0xff, 129),
+ MX31_PIN_CSPI1_MISO = IOMUX_PIN(0xff, 130),
+ MX31_PIN_CSPI1_MOSI = IOMUX_PIN(0xff, 131),
+ MX31_PIN_SFS6 = IOMUX_PIN(26, 132),
+ MX31_PIN_SCK6 = IOMUX_PIN(25, 133),
+ MX31_PIN_SRXD6 = IOMUX_PIN(24, 134),
+ MX31_PIN_STXD6 = IOMUX_PIN(23, 135),
+ MX31_PIN_SFS5 = IOMUX_PIN(0xff, 136),
+ MX31_PIN_SCK5 = IOMUX_PIN(0xff, 137),
+ MX31_PIN_SRXD5 = IOMUX_PIN(22, 138),
+ MX31_PIN_STXD5 = IOMUX_PIN(21, 139),
+ MX31_PIN_SFS4 = IOMUX_PIN(0xff, 140),
+ MX31_PIN_SCK4 = IOMUX_PIN(0xff, 141),
+ MX31_PIN_SRXD4 = IOMUX_PIN(20, 142),
+ MX31_PIN_STXD4 = IOMUX_PIN(19, 143),
+ MX31_PIN_SFS3 = IOMUX_PIN(0xff, 144),
+ MX31_PIN_SCK3 = IOMUX_PIN(0xff, 145),
+ MX31_PIN_SRXD3 = IOMUX_PIN(18, 146),
+ MX31_PIN_STXD3 = IOMUX_PIN(17, 147),
+ MX31_PIN_I2C_DAT = IOMUX_PIN(0xff, 148),
+ MX31_PIN_I2C_CLK = IOMUX_PIN(0xff, 149),
+ MX31_PIN_CSI_PIXCLK = IOMUX_PIN(83, 150),
+ MX31_PIN_CSI_HSYNC = IOMUX_PIN(82, 151),
+ MX31_PIN_CSI_VSYNC = IOMUX_PIN(81, 152),
+ MX31_PIN_CSI_MCLK = IOMUX_PIN(80, 153),
+ MX31_PIN_CSI_D15 = IOMUX_PIN(79, 154),
+ MX31_PIN_CSI_D14 = IOMUX_PIN(78, 155),
+ MX31_PIN_CSI_D13 = IOMUX_PIN(77, 156),
+ MX31_PIN_CSI_D12 = IOMUX_PIN(76, 157),
+ MX31_PIN_CSI_D11 = IOMUX_PIN(75, 158),
+ MX31_PIN_CSI_D10 = IOMUX_PIN(74, 159),
+ MX31_PIN_CSI_D9 = IOMUX_PIN(73, 160),
+ MX31_PIN_CSI_D8 = IOMUX_PIN(72, 161),
+ MX31_PIN_CSI_D7 = IOMUX_PIN(71, 162),
+ MX31_PIN_CSI_D6 = IOMUX_PIN(70, 163),
+ MX31_PIN_CSI_D5 = IOMUX_PIN(69, 164),
+ MX31_PIN_CSI_D4 = IOMUX_PIN(68, 165),
+ MX31_PIN_M_GRANT = IOMUX_PIN(0xff, 166),
+ MX31_PIN_M_REQUEST = IOMUX_PIN(0xff, 167),
+ MX31_PIN_PC_POE = IOMUX_PIN(0xff, 168),
+ MX31_PIN_PC_RW_B = IOMUX_PIN(0xff, 169),
+ MX31_PIN_IOIS16 = IOMUX_PIN(0xff, 170),
+ MX31_PIN_PC_RST = IOMUX_PIN(0xff, 171),
+ MX31_PIN_PC_BVD2 = IOMUX_PIN(0xff, 172),
+ MX31_PIN_PC_BVD1 = IOMUX_PIN(0xff, 173),
+ MX31_PIN_PC_VS2 = IOMUX_PIN(0xff, 174),
+ MX31_PIN_PC_VS1 = IOMUX_PIN(0xff, 175),
+ MX31_PIN_PC_PWRON = IOMUX_PIN(0xff, 176),
+ MX31_PIN_PC_READY = IOMUX_PIN(0xff, 177),
+ MX31_PIN_PC_WAIT_B = IOMUX_PIN(0xff, 178),
+ MX31_PIN_PC_CD2_B = IOMUX_PIN(0xff, 179),
+ MX31_PIN_PC_CD1_B = IOMUX_PIN(0xff, 180),
+ MX31_PIN_D0 = IOMUX_PIN(0xff, 181),
+ MX31_PIN_D1 = IOMUX_PIN(0xff, 182),
+ MX31_PIN_D2 = IOMUX_PIN(0xff, 183),
+ MX31_PIN_D3 = IOMUX_PIN(0xff, 184),
+ MX31_PIN_D4 = IOMUX_PIN(0xff, 185),
+ MX31_PIN_D5 = IOMUX_PIN(0xff, 186),
+ MX31_PIN_D6 = IOMUX_PIN(0xff, 187),
+ MX31_PIN_D7 = IOMUX_PIN(0xff, 188),
+ MX31_PIN_D8 = IOMUX_PIN(0xff, 189),
+ MX31_PIN_D9 = IOMUX_PIN(0xff, 190),
+ MX31_PIN_D10 = IOMUX_PIN(0xff, 191),
+ MX31_PIN_D11 = IOMUX_PIN(0xff, 192),
+ MX31_PIN_D12 = IOMUX_PIN(0xff, 193),
+ MX31_PIN_D13 = IOMUX_PIN(0xff, 194),
+ MX31_PIN_D14 = IOMUX_PIN(0xff, 195),
+ MX31_PIN_D15 = IOMUX_PIN(0xff, 196),
+ MX31_PIN_NFRB = IOMUX_PIN(16, 197),
+ MX31_PIN_NFCE_B = IOMUX_PIN(15, 198),
+ MX31_PIN_NFWP_B = IOMUX_PIN(14, 199),
+ MX31_PIN_NFCLE = IOMUX_PIN(13, 200),
+ MX31_PIN_NFALE = IOMUX_PIN(12, 201),
+ MX31_PIN_NFRE_B = IOMUX_PIN(11, 202),
+ MX31_PIN_NFWE_B = IOMUX_PIN(10, 203),
+ MX31_PIN_SDQS3 = IOMUX_PIN(0xff, 204),
+ MX31_PIN_SDQS2 = IOMUX_PIN(0xff, 205),
+ MX31_PIN_SDQS1 = IOMUX_PIN(0xff, 206),
+ MX31_PIN_SDQS0 = IOMUX_PIN(0xff, 207),
+ MX31_PIN_SDCLK_B = IOMUX_PIN(0xff, 208),
+ MX31_PIN_SDCLK = IOMUX_PIN(0xff, 209),
+ MX31_PIN_SDCKE1 = IOMUX_PIN(0xff, 210),
+ MX31_PIN_SDCKE0 = IOMUX_PIN(0xff, 211),
+ MX31_PIN_SDWE = IOMUX_PIN(0xff, 212),
+ MX31_PIN_CAS = IOMUX_PIN(0xff, 213),
+ MX31_PIN_RAS = IOMUX_PIN(0xff, 214),
+ MX31_PIN_RW = IOMUX_PIN(0xff, 215),
+ MX31_PIN_BCLK = IOMUX_PIN(0xff, 216),
+ MX31_PIN_LBA = IOMUX_PIN(0xff, 217),
+ MX31_PIN_ECB = IOMUX_PIN(0xff, 218),
+ MX31_PIN_CS5 = IOMUX_PIN(0xff, 219),
+ MX31_PIN_CS4 = IOMUX_PIN(0xff, 220),
+ MX31_PIN_CS3 = IOMUX_PIN(0xff, 221),
+ MX31_PIN_CS2 = IOMUX_PIN(0xff, 222),
+ MX31_PIN_CS1 = IOMUX_PIN(0xff, 223),
+ MX31_PIN_CS0 = IOMUX_PIN(0xff, 224),
+ MX31_PIN_OE = IOMUX_PIN(0xff, 225),
+ MX31_PIN_EB1 = IOMUX_PIN(0xff, 226),
+ MX31_PIN_EB0 = IOMUX_PIN(0xff, 227),
+ MX31_PIN_DQM3 = IOMUX_PIN(0xff, 228),
+ MX31_PIN_DQM2 = IOMUX_PIN(0xff, 229),
+ MX31_PIN_DQM1 = IOMUX_PIN(0xff, 230),
+ MX31_PIN_DQM0 = IOMUX_PIN(0xff, 231),
+ MX31_PIN_SD31 = IOMUX_PIN(0xff, 232),
+ MX31_PIN_SD30 = IOMUX_PIN(0xff, 233),
+ MX31_PIN_SD29 = IOMUX_PIN(0xff, 234),
+ MX31_PIN_SD28 = IOMUX_PIN(0xff, 235),
+ MX31_PIN_SD27 = IOMUX_PIN(0xff, 236),
+ MX31_PIN_SD26 = IOMUX_PIN(0xff, 237),
+ MX31_PIN_SD25 = IOMUX_PIN(0xff, 238),
+ MX31_PIN_SD24 = IOMUX_PIN(0xff, 239),
+ MX31_PIN_SD23 = IOMUX_PIN(0xff, 240),
+ MX31_PIN_SD22 = IOMUX_PIN(0xff, 241),
+ MX31_PIN_SD21 = IOMUX_PIN(0xff, 242),
+ MX31_PIN_SD20 = IOMUX_PIN(0xff, 243),
+ MX31_PIN_SD19 = IOMUX_PIN(0xff, 244),
+ MX31_PIN_SD18 = IOMUX_PIN(0xff, 245),
+ MX31_PIN_SD17 = IOMUX_PIN(0xff, 246),
+ MX31_PIN_SD16 = IOMUX_PIN(0xff, 247),
+ MX31_PIN_SD15 = IOMUX_PIN(0xff, 248),
+ MX31_PIN_SD14 = IOMUX_PIN(0xff, 249),
+ MX31_PIN_SD13 = IOMUX_PIN(0xff, 250),
+ MX31_PIN_SD12 = IOMUX_PIN(0xff, 251),
+ MX31_PIN_SD11 = IOMUX_PIN(0xff, 252),
+ MX31_PIN_SD10 = IOMUX_PIN(0xff, 253),
+ MX31_PIN_SD9 = IOMUX_PIN(0xff, 254),
+ MX31_PIN_SD8 = IOMUX_PIN(0xff, 255),
+ MX31_PIN_SD7 = IOMUX_PIN(0xff, 256),
+ MX31_PIN_SD6 = IOMUX_PIN(0xff, 257),
+ MX31_PIN_SD5 = IOMUX_PIN(0xff, 258),
+ MX31_PIN_SD4 = IOMUX_PIN(0xff, 259),
+ MX31_PIN_SD3 = IOMUX_PIN(0xff, 260),
+ MX31_PIN_SD2 = IOMUX_PIN(0xff, 261),
+ MX31_PIN_SD1 = IOMUX_PIN(0xff, 262),
+ MX31_PIN_SD0 = IOMUX_PIN(0xff, 263),
+ MX31_PIN_SDBA0 = IOMUX_PIN(0xff, 264),
+ MX31_PIN_SDBA1 = IOMUX_PIN(0xff, 265),
+ MX31_PIN_A25 = IOMUX_PIN(0xff, 266),
+ MX31_PIN_A24 = IOMUX_PIN(0xff, 267),
+ MX31_PIN_A23 = IOMUX_PIN(0xff, 268),
+ MX31_PIN_A22 = IOMUX_PIN(0xff, 269),
+ MX31_PIN_A21 = IOMUX_PIN(0xff, 270),
+ MX31_PIN_A20 = IOMUX_PIN(0xff, 271),
+ MX31_PIN_A19 = IOMUX_PIN(0xff, 272),
+ MX31_PIN_A18 = IOMUX_PIN(0xff, 273),
+ MX31_PIN_A17 = IOMUX_PIN(0xff, 274),
+ MX31_PIN_A16 = IOMUX_PIN(0xff, 275),
+ MX31_PIN_A14 = IOMUX_PIN(0xff, 276),
+ MX31_PIN_A15 = IOMUX_PIN(0xff, 277),
+ MX31_PIN_A13 = IOMUX_PIN(0xff, 278),
+ MX31_PIN_A12 = IOMUX_PIN(0xff, 279),
+ MX31_PIN_A11 = IOMUX_PIN(0xff, 280),
+ MX31_PIN_MA10 = IOMUX_PIN(0xff, 281),
+ MX31_PIN_A10 = IOMUX_PIN(0xff, 282),
+ MX31_PIN_A9 = IOMUX_PIN(0xff, 283),
+ MX31_PIN_A8 = IOMUX_PIN(0xff, 284),
+ MX31_PIN_A7 = IOMUX_PIN(0xff, 285),
+ MX31_PIN_A6 = IOMUX_PIN(0xff, 286),
+ MX31_PIN_A5 = IOMUX_PIN(0xff, 287),
+ MX31_PIN_A4 = IOMUX_PIN(0xff, 288),
+ MX31_PIN_A3 = IOMUX_PIN(0xff, 289),
+ MX31_PIN_A2 = IOMUX_PIN(0xff, 290),
+ MX31_PIN_A1 = IOMUX_PIN(0xff, 291),
+ MX31_PIN_A0 = IOMUX_PIN(0xff, 292),
+ MX31_PIN_VPG1 = IOMUX_PIN(0xff, 293),
+ MX31_PIN_VPG0 = IOMUX_PIN(0xff, 294),
+ MX31_PIN_DVFS1 = IOMUX_PIN(0xff, 295),
+ MX31_PIN_DVFS0 = IOMUX_PIN(0xff, 296),
+ MX31_PIN_VSTBY = IOMUX_PIN(0xff, 297),
+ MX31_PIN_POWER_FAIL = IOMUX_PIN(0xff, 298),
+ MX31_PIN_CKIL = IOMUX_PIN(0xff, 299),
+ MX31_PIN_BOOT_MODE4 = IOMUX_PIN(0xff, 300),
+ MX31_PIN_BOOT_MODE3 = IOMUX_PIN(0xff, 301),
+ MX31_PIN_BOOT_MODE2 = IOMUX_PIN(0xff, 302),
+ MX31_PIN_BOOT_MODE1 = IOMUX_PIN(0xff, 303),
+ MX31_PIN_BOOT_MODE0 = IOMUX_PIN(0xff, 304),
+ MX31_PIN_CLKO = IOMUX_PIN(0xff, 305),
+ MX31_PIN_POR_B = IOMUX_PIN(0xff, 306),
+ MX31_PIN_RESET_IN_B = IOMUX_PIN(0xff, 307),
+ MX31_PIN_CKIH = IOMUX_PIN(0xff, 308),
+ MX31_PIN_SIMPD0 = IOMUX_PIN(35, 309),
+ MX31_PIN_SRX0 = IOMUX_PIN(34, 310),
+ MX31_PIN_STX0 = IOMUX_PIN(33, 311),
+ MX31_PIN_SVEN0 = IOMUX_PIN(32, 312),
+ MX31_PIN_SRST0 = IOMUX_PIN(67, 313),
+ MX31_PIN_SCLK0 = IOMUX_PIN(66, 314),
+ MX31_PIN_GPIO3_1 = IOMUX_PIN(65, 315),
+ MX31_PIN_GPIO3_0 = IOMUX_PIN(64, 316),
+ MX31_PIN_GPIO1_6 = IOMUX_PIN( 6, 317),
+ MX31_PIN_GPIO1_5 = IOMUX_PIN( 5, 318),
+ MX31_PIN_GPIO1_4 = IOMUX_PIN( 4, 319),
+ MX31_PIN_GPIO1_3 = IOMUX_PIN( 3, 320),
+ MX31_PIN_GPIO1_2 = IOMUX_PIN( 2, 321),
+ MX31_PIN_GPIO1_1 = IOMUX_PIN( 1, 322),
+ MX31_PIN_GPIO1_0 = IOMUX_PIN( 0, 323),
+ MX31_PIN_PWMO = IOMUX_PIN( 9, 324),
+ MX31_PIN_WATCHDOG_RST = IOMUX_PIN(0xff, 325),
+ MX31_PIN_COMPARE = IOMUX_PIN( 8, 326),
+ MX31_PIN_CAPTURE = IOMUX_PIN( 7, 327),
+};
+
+/*
+ * Convenience values for use with mxc_iomux_mode()
+ *
+ * Format here is MX31_PIN_(pin name)__(function)
+ */
+#define MX31_PIN_CSPI3_MOSI__RXD3 IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI3_MISO__TXD3 IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CTS1__CTS1 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RXD1__RXD1 IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC)
+
+/*
+ * This function configures the pad value for a IOMUX pin.
+ */
+void mxc_iomux_set_pad(enum iomux_pins, u32);
+
+#endif
+
diff --git a/include/asm-arm/arch-mxc/irqs.h b/include/asm-arm/arch-mxc/irqs.h
index b2c5205e1962..f416130718cf 100644
--- a/include/asm-arm/arch-mxc/irqs.h
+++ b/include/asm-arm/arch-mxc/irqs.h
@@ -13,17 +13,4 @@
#include <asm/hardware.h>
-#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
-
-#define MXC_IRQ_TO_GPIO(irq) ((irq) - MXC_GPIO_INT_BASE)
-#define MXC_GPIO_TO_IRQ(x) (MXC_GPIO_INT_BASE + x)
-
-/* Number of normal interrupts */
-#define NR_IRQS (MXC_MAX_INT_LINES + \
- MXC_MAX_GPIO_LINES + \
- MXC_MAX_VIRTUAL_INTS)
-
-/* Number of fast interrupts */
-#define NR_FIQS MXC_MAX_INTS
-
#endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/include/asm-arm/arch-mxc/mx27.h b/include/asm-arm/arch-mxc/mx27.h
new file mode 100644
index 000000000000..212ecc246626
--- /dev/null
+++ b/include/asm-arm/arch-mxc/mx27.h
@@ -0,0 +1,302 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX27_H__
+#define __ASM_ARCH_MXC_MX27_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+/* IRAM */
+#define IRAM_BASE_ADDR 0xFFFF4C00 /* internal ram */
+
+/* Register offests */
+#define AIPI_BASE_ADDR 0x10000000
+#define AIPI_BASE_ADDR_VIRT 0xF4000000
+#define AIPI_SIZE SZ_1M
+
+#define DMA_BASE_ADDR (AIPI_BASE_ADDR + 0x01000)
+#define WDOG_BASE_ADDR (AIPI_BASE_ADDR + 0x02000)
+#define GPT1_BASE_ADDR (AIPI_BASE_ADDR + 0x03000)
+#define GPT2_BASE_ADDR (AIPI_BASE_ADDR + 0x04000)
+#define GPT3_BASE_ADDR (AIPI_BASE_ADDR + 0x05000)
+#define PWM_BASE_ADDR (AIPI_BASE_ADDR + 0x06000)
+#define RTC_BASE_ADDR (AIPI_BASE_ADDR + 0x07000)
+#define KPP_BASE_ADDR (AIPI_BASE_ADDR + 0x08000)
+#define OWIRE_BASE_ADDR (AIPI_BASE_ADDR + 0x09000)
+#define UART1_BASE_ADDR (AIPI_BASE_ADDR + 0x0A000)
+#define UART2_BASE_ADDR (AIPI_BASE_ADDR + 0x0B000)
+#define UART3_BASE_ADDR (AIPI_BASE_ADDR + 0x0C000)
+#define UART4_BASE_ADDR (AIPI_BASE_ADDR + 0x0D000)
+#define CSPI1_BASE_ADDR (AIPI_BASE_ADDR + 0x0E000)
+#define CSPI2_BASE_ADDR (AIPI_BASE_ADDR + 0x0F000)
+#define SSI1_BASE_ADDR (AIPI_BASE_ADDR + 0x10000)
+#define SSI2_BASE_ADDR (AIPI_BASE_ADDR + 0x11000)
+#define I2C_BASE_ADDR (AIPI_BASE_ADDR + 0x12000)
+#define SDHC1_BASE_ADDR (AIPI_BASE_ADDR + 0x13000)
+#define SDHC2_BASE_ADDR (AIPI_BASE_ADDR + 0x14000)
+#define GPIO_BASE_ADDR (AIPI_BASE_ADDR + 0x15000)
+#define AUDMUX_BASE_ADDR (AIPI_BASE_ADDR + 0x16000)
+
+#define CSPI3_BASE_ADDR (AIPI_BASE_ADDR + 0x17000)
+#define MSHC_BASE_ADDR (AIPI_BASE_ADDR + 0x18000)
+#define GPT5_BASE_ADDR (AIPI_BASE_ADDR + 0x19000)
+#define GPT4_BASE_ADDR (AIPI_BASE_ADDR + 0x1A000)
+#define UART5_BASE_ADDR (AIPI_BASE_ADDR + 0x1B000)
+#define UART6_BASE_ADDR (AIPI_BASE_ADDR + 0x1C000)
+#define I2C2_BASE_ADDR (AIPI_BASE_ADDR + 0x1D000)
+#define SDHC3_BASE_ADDR (AIPI_BASE_ADDR + 0x1E000)
+#define GPT6_BASE_ADDR (AIPI_BASE_ADDR + 0x1F000)
+
+#define LCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x21000)
+#define SLCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x22000)
+#define VPU_BASE_ADDR (AIPI_BASE_ADDR + 0x23000)
+#define USBOTG_BASE_ADDR (AIPI_BASE_ADDR + 0x24000)
+/* for mx27*/
+#define OTG_BASE_ADDR USBOTG_BASE_ADDR
+#define SAHARA_BASE_ADDR (AIPI_BASE_ADDR + 0x25000)
+#define EMMA_BASE_ADDR (AIPI_BASE_ADDR + 0x26400)
+#define CCM_BASE_ADDR (AIPI_BASE_ADDR + 0x27000)
+#define SYSCTRL_BASE_ADDR (AIPI_BASE_ADDR + 0x27800)
+#define IIM_BASE_ADDR (AIPI_BASE_ADDR + 0x28000)
+
+#define RTIC_BASE_ADDR (AIPI_BASE_ADDR + 0x2A000)
+#define FEC_BASE_ADDR (AIPI_BASE_ADDR + 0x2B000)
+#define SCC_BASE_ADDR (AIPI_BASE_ADDR + 0x2C000)
+#define ETB_BASE_ADDR (AIPI_BASE_ADDR + 0x3B000)
+#define ETB_RAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3C000)
+
+#define JAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3E000)
+#define MAX_BASE_ADDR (AIPI_BASE_ADDR + 0x3F000)
+
+/* ROMP and AVIC */
+#define ROMP_BASE_ADDR 0x10041000
+
+#define AVIC_BASE_ADDR 0x10040000
+
+#define SAHB1_BASE_ADDR 0x80000000
+#define SAHB1_BASE_ADDR_VIRT 0xF4100000
+#define SAHB1_SIZE SZ_1M
+
+#define CSI_BASE_ADDR (SAHB1_BASE_ADDR + 0x0000)
+#define ATA_BASE_ADDR (SAHB1_BASE_ADDR + 0x1000)
+
+/* NAND, SDRAM, WEIM, M3IF, EMI controllers */
+#define X_MEMC_BASE_ADDR 0xD8000000
+#define X_MEMC_BASE_ADDR_VIRT 0xF4200000
+#define X_MEMC_SIZE SZ_1M
+
+#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR)
+#define SDRAMC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000)
+#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000)
+#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000)
+#define PCMCIA_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000)
+
+/* Memory regions and CS */
+#define SDRAM_BASE_ADDR 0xA0000000
+#define CSD1_BASE_ADDR 0xB0000000
+
+#define CS0_BASE_ADDR 0xC0000000
+#define CS1_BASE_ADDR 0xC8000000
+#define CS2_BASE_ADDR 0xD0000000
+#define CS3_BASE_ADDR 0xD2000000
+#define CS4_BASE_ADDR 0xD4000000
+#define CS5_BASE_ADDR 0xD6000000
+#define PCMCIA_MEM_BASE_ADDR 0xDC000000
+
+/*
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+#define IO_ADDRESS(x) \
+ (((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
+ AIPI_IO_ADDRESS(x) : \
+ ((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
+ SAHB1_IO_ADDRESS(x) : \
+ ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \
+ X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF)
+
+/* define the address mapping macros: in physical address order */
+#define AIPI_IO_ADDRESS(x) \
+ (((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT)
+
+#define AVIC_IO_ADDRESS(x) AIPI_IO_ADDRESS(x)
+
+#define SAHB1_IO_ADDRESS(x) \
+ (((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT)
+
+#define CS4_IO_ADDRESS(x) \
+ (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
+
+#define X_MEMC_IO_ADDRESS(x) \
+ (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+#define PCMCIA_IO_ADDRESS(x) \
+ (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+/* fixed interrput numbers */
+#define MXC_INT_CCM 63
+#define MXC_INT_IIM 62
+#define MXC_INT_LCDC 61
+#define MXC_INT_SLCDC 60
+#define MXC_INT_SAHARA 59
+#define MXC_INT_SCC_SCM 58
+#define MXC_INT_SCC_SMN 57
+#define MXC_INT_USB3 56
+#define MXC_INT_USB2 55
+#define MXC_INT_USB1 54
+#define MXC_INT_VPU 53
+#define MXC_INT_EMMAPP 52
+#define MXC_INT_EMMAPRP 51
+#define MXC_INT_FEC 50
+#define MXC_INT_UART5 49
+#define MXC_INT_UART6 48
+#define MXC_INT_DMACH15 47
+#define MXC_INT_DMACH14 46
+#define MXC_INT_DMACH13 45
+#define MXC_INT_DMACH12 44
+#define MXC_INT_DMACH11 43
+#define MXC_INT_DMACH10 42
+#define MXC_INT_DMACH9 41
+#define MXC_INT_DMACH8 40
+#define MXC_INT_DMACH7 39
+#define MXC_INT_DMACH6 38
+#define MXC_INT_DMACH5 37
+#define MXC_INT_DMACH4 36
+#define MXC_INT_DMACH3 35
+#define MXC_INT_DMACH2 34
+#define MXC_INT_DMACH1 33
+#define MXC_INT_DMACH0 32
+#define MXC_INT_CSI 31
+#define MXC_INT_ATA 30
+#define MXC_INT_NANDFC 29
+#define MXC_INT_PCMCIA 28
+#define MXC_INT_WDOG 27
+#define MXC_INT_GPT1 26
+#define MXC_INT_GPT2 25
+#define MXC_INT_GPT3 24
+#define MXC_INT_GPT INT_GPT1
+#define MXC_INT_PWM 23
+#define MXC_INT_RTC 22
+#define MXC_INT_KPP 21
+#define MXC_INT_UART1 20
+#define MXC_INT_UART2 19
+#define MXC_INT_UART3 18
+#define MXC_INT_UART4 17
+#define MXC_INT_CSPI1 16
+#define MXC_INT_CSPI2 15
+#define MXC_INT_SSI1 14
+#define MXC_INT_SSI2 13
+#define MXC_INT_I2C 12
+#define MXC_INT_SDHC1 11
+#define MXC_INT_SDHC2 10
+#define MXC_INT_SDHC3 9
+#define MXC_INT_GPIO 8
+#define MXC_INT_SDHC 7
+#define MXC_INT_CSPI3 6
+#define MXC_INT_RTIC 5
+#define MXC_INT_GPT4 4
+#define MXC_INT_GPT5 3
+#define MXC_INT_GPT6 2
+#define MXC_INT_I2C2 1
+
+/* fixed DMA request numbers */
+#define DMA_REQ_NFC 37
+#define DMA_REQ_SDHC3 36
+#define DMA_REQ_UART6_RX 35
+#define DMA_REQ_UART6_TX 34
+#define DMA_REQ_UART5_RX 33
+#define DMA_REQ_UART5_TX 32
+#define DMA_REQ_CSI_RX 31
+#define DMA_REQ_CSI_STAT 30
+#define DMA_REQ_ATA_RCV 29
+#define DMA_REQ_ATA_TX 28
+#define DMA_REQ_UART1_TX 27
+#define DMA_REQ_UART1_RX 26
+#define DMA_REQ_UART2_TX 25
+#define DMA_REQ_UART2_RX 24
+#define DMA_REQ_UART3_TX 23
+#define DMA_REQ_UART3_RX 22
+#define DMA_REQ_UART4_TX 21
+#define DMA_REQ_UART4_RX 20
+#define DMA_REQ_CSPI1_TX 19
+#define DMA_REQ_CSPI1_RX 18
+#define DMA_REQ_CSPI2_TX 17
+#define DMA_REQ_CSPI2_RX 16
+#define DMA_REQ_SSI1_TX1 15
+#define DMA_REQ_SSI1_RX1 14
+#define DMA_REQ_SSI1_TX0 13
+#define DMA_REQ_SSI1_RX0 12
+#define DMA_REQ_SSI2_TX1 11
+#define DMA_REQ_SSI2_RX1 10
+#define DMA_REQ_SSI2_TX0 9
+#define DMA_REQ_SSI2_RX0 8
+#define DMA_REQ_SDHC1 7
+#define DMA_REQ_SDHC2 6
+#define DMA_REQ_MSHC 4
+#define DMA_REQ_EXT 3
+#define DMA_REQ_CSPI3_TX 2
+#define DMA_REQ_CSPI3_RX 1
+
+/* silicon revisions specific to i.MX27 */
+#define CHIP_REV_1_0 0x00
+#define CHIP_REV_2_0 0x01
+
+#ifndef __ASSEMBLY__
+extern int mx27_revision(void);
+#endif
+
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR 0x1C
+#define GPIO_GDIR 0x00
+#define GPIO_PSR 0x24
+#define GPIO_ICR1 0x28
+#define GPIO_ICR2 0x2C
+#define GPIO_IMR 0x30
+#define GPIO_ISR 0x34
+#define GPIO_INT_LOW_LEV 0x3
+#define GPIO_INT_HIGH_LEV 0x2
+#define GPIO_INT_RISE_EDGE 0x0
+#define GPIO_INT_FALL_EDGE 0x1
+#define GPIO_INT_NONE 0x4
+
+/* Mandatory defines used globally */
+
+/* this is an i.MX27 CPU */
+#define cpu_is_mx27() (1)
+
+/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
+#define ARCH_NR_GPIOS (192 + 16)
+
+/* OS clock tick rate */
+#define CLOCK_TICK_RATE 13300000
+
+/* Start of RAM */
+#define PHYS_OFFSET SDRAM_BASE_ADDR
+
+/* max interrupt lines count */
+#define NR_IRQS 256
+
+/* count of internal interrupt sources */
+#define MXC_MAX_INT_LINES 64
+
+#endif /* __ASM_ARCH_MXC_MX27_H__ */
diff --git a/include/asm-arm/arch-mxc/mx31.h b/include/asm-arm/arch-mxc/mx31.h
index 36a1af495bb3..a7373e4a56cb 100644
--- a/include/asm-arm/arch-mxc/mx31.h
+++ b/include/asm-arm/arch-mxc/mx31.h
@@ -320,6 +320,8 @@
#define MXC_MAX_GPIO_LINES (GPIO_NUM_PIN * GPIO_PORT_NUM)
#define MXC_MAX_VIRTUAL_INTS 16
+#define NR_IRQS (MXC_MAX_INT_LINES + MXC_MAX_GPIO_LINES + MXC_MAX_VIRTUAL_INTS)
+
/*!
* Number of GPIO port as defined in the IC Spec
*/
@@ -347,6 +349,25 @@
#define SYSTEM_REV_MIN CHIP_REV_1_0
#define SYSTEM_REV_NUM 3
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR 0x00
+#define GPIO_GDIR 0x04
+#define GPIO_PSR 0x08
+#define GPIO_ICR1 0x0C
+#define GPIO_ICR2 0x10
+#define GPIO_IMR 0x14
+#define GPIO_ISR 0x18
+#define GPIO_INT_LOW_LEV 0x0
+#define GPIO_INT_HIGH_LEV 0x1
+#define GPIO_INT_RISE_EDGE 0x2
+#define GPIO_INT_FALL_EDGE 0x3
+#define GPIO_INT_NONE 0x4
+
+/* Mandatory defines used globally */
+
+/* this CPU supports up to 96 GPIOs */
+#define ARCH_NR_GPIOS 96
+
#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
/* this is a i.MX31 CPU */
diff --git a/include/asm-arm/arch-mxc/mxc.h b/include/asm-arm/arch-mxc/mxc.h
index 146d3f60951a..332eda4dbd3b 100644
--- a/include/asm-arm/arch-mxc/mxc.h
+++ b/include/asm-arm/arch-mxc/mxc.h
@@ -1,11 +1,20 @@
/*
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
*/
#ifndef __ASM_ARCH_MXC_H__
@@ -20,133 +29,8 @@
# define cpu_is_mx31() (0)
#endif
-/*
- *****************************************
- * GPT Register definitions *
- *****************************************
- */
-#define MXC_GPT_GPTCR IO_ADDRESS(GPT1_BASE_ADDR + 0x00)
-#define MXC_GPT_GPTPR IO_ADDRESS(GPT1_BASE_ADDR + 0x04)
-#define MXC_GPT_GPTSR IO_ADDRESS(GPT1_BASE_ADDR + 0x08)
-#define MXC_GPT_GPTIR IO_ADDRESS(GPT1_BASE_ADDR + 0x0C)
-#define MXC_GPT_GPTOCR1 IO_ADDRESS(GPT1_BASE_ADDR + 0x10)
-#define MXC_GPT_GPTOCR2 IO_ADDRESS(GPT1_BASE_ADDR + 0x14)
-#define MXC_GPT_GPTOCR3 IO_ADDRESS(GPT1_BASE_ADDR + 0x18)
-#define MXC_GPT_GPTICR1 IO_ADDRESS(GPT1_BASE_ADDR + 0x1C)
-#define MXC_GPT_GPTICR2 IO_ADDRESS(GPT1_BASE_ADDR + 0x20)
-#define MXC_GPT_GPTCNT IO_ADDRESS(GPT1_BASE_ADDR + 0x24)
-
-/* GPT Control register bit definitions */
-#define GPTCR_FO3 (1 << 31)
-#define GPTCR_FO2 (1 << 30)
-#define GPTCR_FO1 (1 << 29)
-
-#define GPTCR_OM3_SHIFT 26
-#define GPTCR_OM3_MASK (7 << GPTCR_OM3_SHIFT)
-#define GPTCR_OM3_DISCONNECTED (0 << GPTCR_OM3_SHIFT)
-#define GPTCR_OM3_TOGGLE (1 << GPTCR_OM3_SHIFT)
-#define GPTCR_OM3_CLEAR (2 << GPTCR_OM3_SHIFT)
-#define GPTCR_OM3_SET (3 << GPTCR_OM3_SHIFT)
-#define GPTCR_OM3_GENERATE_LOW (7 << GPTCR_OM3_SHIFT)
-
-#define GPTCR_OM2_SHIFT 23
-#define GPTCR_OM2_MASK (7 << GPTCR_OM2_SHIFT)
-#define GPTCR_OM2_DISCONNECTED (0 << GPTCR_OM2_SHIFT)
-#define GPTCR_OM2_TOGGLE (1 << GPTCR_OM2_SHIFT)
-#define GPTCR_OM2_CLEAR (2 << GPTCR_OM2_SHIFT)
-#define GPTCR_OM2_SET (3 << GPTCR_OM2_SHIFT)
-#define GPTCR_OM2_GENERATE_LOW (7 << GPTCR_OM2_SHIFT)
-
-#define GPTCR_OM1_SHIFT 20
-#define GPTCR_OM1_MASK (7 << GPTCR_OM1_SHIFT)
-#define GPTCR_OM1_DISCONNECTED (0 << GPTCR_OM1_SHIFT)
-#define GPTCR_OM1_TOGGLE (1 << GPTCR_OM1_SHIFT)
-#define GPTCR_OM1_CLEAR (2 << GPTCR_OM1_SHIFT)
-#define GPTCR_OM1_SET (3 << GPTCR_OM1_SHIFT)
-#define GPTCR_OM1_GENERATE_LOW (7 << GPTCR_OM1_SHIFT)
-
-#define GPTCR_IM2_SHIFT 18
-#define GPTCR_IM2_MASK (3 << GPTCR_IM2_SHIFT)
-#define GPTCR_IM2_CAPTURE_DISABLE (0 << GPTCR_IM2_SHIFT)
-#define GPTCR_IM2_CAPTURE_RISING (1 << GPTCR_IM2_SHIFT)
-#define GPTCR_IM2_CAPTURE_FALLING (2 << GPTCR_IM2_SHIFT)
-#define GPTCR_IM2_CAPTURE_BOTH (3 << GPTCR_IM2_SHIFT)
-
-#define GPTCR_IM1_SHIFT 16
-#define GPTCR_IM1_MASK (3 << GPTCR_IM1_SHIFT)
-#define GPTCR_IM1_CAPTURE_DISABLE (0 << GPTCR_IM1_SHIFT)
-#define GPTCR_IM1_CAPTURE_RISING (1 << GPTCR_IM1_SHIFT)
-#define GPTCR_IM1_CAPTURE_FALLING (2 << GPTCR_IM1_SHIFT)
-#define GPTCR_IM1_CAPTURE_BOTH (3 << GPTCR_IM1_SHIFT)
-
-#define GPTCR_SWR (1 << 15)
-#define GPTCR_FRR (1 << 9)
-
-#define GPTCR_CLKSRC_SHIFT 6
-#define GPTCR_CLKSRC_MASK (7 << GPTCR_CLKSRC_SHIFT)
-#define GPTCR_CLKSRC_NOCLOCK (0 << GPTCR_CLKSRC_SHIFT)
-#define GPTCR_CLKSRC_HIGHFREQ (2 << GPTCR_CLKSRC_SHIFT)
-#define GPTCR_CLKSRC_CLKIN (3 << GPTCR_CLKSRC_SHIFT)
-#define GPTCR_CLKSRC_CLK32K (7 << GPTCR_CLKSRC_SHIFT)
-
-#define GPTCR_STOPEN (1 << 5)
-#define GPTCR_DOZEN (1 << 4)
-#define GPTCR_WAITEN (1 << 3)
-#define GPTCR_DBGEN (1 << 2)
-
-#define GPTCR_ENMOD (1 << 1)
-#define GPTCR_ENABLE (1 << 0)
-
-#define GPTSR_OF1 (1 << 0)
-#define GPTSR_OF2 (1 << 1)
-#define GPTSR_OF3 (1 << 2)
-#define GPTSR_IF1 (1 << 3)
-#define GPTSR_IF2 (1 << 4)
-#define GPTSR_ROV (1 << 5)
-
-#define GPTIR_OF1IE GPTSR_OF1
-#define GPTIR_OF2IE GPTSR_OF2
-#define GPTIR_OF3IE GPTSR_OF3
-#define GPTIR_IF1IE GPTSR_IF1
-#define GPTIR_IF2IE GPTSR_IF2
-#define GPTIR_ROVIE GPTSR_ROV
-
-/*
- *****************************************
- * AVIC Registers *
- *****************************************
- */
-#define AVIC_BASE IO_ADDRESS(AVIC_BASE_ADDR)
-#define AVIC_INTCNTL (AVIC_BASE + 0x00) /* int control reg */
-#define AVIC_NIMASK (AVIC_BASE + 0x04) /* int mask reg */
-#define AVIC_INTENNUM (AVIC_BASE + 0x08) /* int enable number reg */
-#define AVIC_INTDISNUM (AVIC_BASE + 0x0C) /* int disable number reg */
-#define AVIC_INTENABLEH (AVIC_BASE + 0x10) /* int enable reg high */
-#define AVIC_INTENABLEL (AVIC_BASE + 0x14) /* int enable reg low */
-#define AVIC_INTTYPEH (AVIC_BASE + 0x18) /* int type reg high */
-#define AVIC_INTTYPEL (AVIC_BASE + 0x1C) /* int type reg low */
-#define AVIC_NIPRIORITY7 (AVIC_BASE + 0x20) /* norm int priority lvl7 */
-#define AVIC_NIPRIORITY6 (AVIC_BASE + 0x24) /* norm int priority lvl6 */
-#define AVIC_NIPRIORITY5 (AVIC_BASE + 0x28) /* norm int priority lvl5 */
-#define AVIC_NIPRIORITY4 (AVIC_BASE + 0x2C) /* norm int priority lvl4 */
-#define AVIC_NIPRIORITY3 (AVIC_BASE + 0x30) /* norm int priority lvl3 */
-#define AVIC_NIPRIORITY2 (AVIC_BASE + 0x34) /* norm int priority lvl2 */
-#define AVIC_NIPRIORITY1 (AVIC_BASE + 0x38) /* norm int priority lvl1 */
-#define AVIC_NIPRIORITY0 (AVIC_BASE + 0x3C) /* norm int priority lvl0 */
-#define AVIC_NIVECSR (AVIC_BASE + 0x40) /* norm int vector/status */
-#define AVIC_FIVECSR (AVIC_BASE + 0x44) /* fast int vector/status */
-#define AVIC_INTSRCH (AVIC_BASE + 0x48) /* int source reg high */
-#define AVIC_INTSRCL (AVIC_BASE + 0x4C) /* int source reg low */
-#define AVIC_INTFRCH (AVIC_BASE + 0x50) /* int force reg high */
-#define AVIC_INTFRCL (AVIC_BASE + 0x54) /* int force reg low */
-#define AVIC_NIPNDH (AVIC_BASE + 0x58) /* norm int pending high */
-#define AVIC_NIPNDL (AVIC_BASE + 0x5C) /* norm int pending low */
-#define AVIC_FIPNDH (AVIC_BASE + 0x60) /* fast int pending high */
-#define AVIC_FIPNDL (AVIC_BASE + 0x64) /* fast int pending low */
-
-#define SYSTEM_PREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x20)
-#define SYSTEM_SREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x24)
-#define IIM_PROD_REV_SH 3
-#define IIM_PROD_REV_LEN 5
+#ifndef CONFIG_MACH_MX27
+# define cpu_is_mx27() (0)
+#endif
#endif /* __ASM_ARCH_MXC_H__ */
diff --git a/include/asm-arm/arch-mxc/mxc_timer.h b/include/asm-arm/arch-mxc/mxc_timer.h
new file mode 100644
index 000000000000..6cb11f4f1a06
--- /dev/null
+++ b/include/asm-arm/arch-mxc/mxc_timer.h
@@ -0,0 +1,158 @@
+/*
+ * mxc_timer.h
+ *
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __PLAT_MXC_TIMER_H
+#define __PLAT_MXC_TIMER_H
+
+#include <linux/clk.h>
+#include <asm/hardware.h>
+
+#ifdef CONFIG_ARCH_IMX
+#define TIMER_BASE IO_ADDRESS(TIM1_BASE_ADDR)
+#define TIMER_INTERRUPT TIM1_INT
+
+#define TCTL_VAL TCTL_CLK_PCLK1
+#define TCTL_IRQEN (1<<4)
+#define TCTL_FRR (1<<8)
+#define TCTL_CLK_PCLK1 (1<<1)
+#define TCTL_CLK_PCLK1_4 (2<<1)
+#define TCTL_CLK_TIN (3<<1)
+#define TCTL_CLK_32 (4<<1)
+
+#define MXC_TCTL 0x00
+#define MXC_TPRER 0x04
+#define MXC_TCMP 0x08
+#define MXC_TCR 0x0c
+#define MXC_TCN 0x10
+#define MXC_TSTAT 0x14
+#define TSTAT_CAPT (1<<1)
+#define TSTAT_COMP (1<<0)
+
+static inline void gpt_irq_disable(void)
+{
+ unsigned int tmp;
+
+ tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
+ __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
+}
+
+static inline void gpt_irq_enable(void)
+{
+ __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
+ TIMER_BASE + MXC_TCTL);
+}
+
+static void gpt_irq_acknowledge(void)
+{
+ __raw_writel(0, TIMER_BASE + MXC_TSTAT);
+}
+#endif /* CONFIG_ARCH_IMX */
+
+#ifdef CONFIG_ARCH_MX2
+#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR)
+#define TIMER_INTERRUPT MXC_INT_GPT1
+
+#define MXC_TCTL 0x00
+#define TCTL_VAL TCTL_CLK_PCLK1
+#define TCTL_CLK_PCLK1 (1<<1)
+#define TCTL_CLK_PCLK1_4 (2<<1)
+#define TCTL_IRQEN (1<<4)
+#define TCTL_FRR (1<<8)
+#define MXC_TPRER 0x04
+#define MXC_TCMP 0x08
+#define MXC_TCR 0x0c
+#define MXC_TCN 0x10
+#define MXC_TSTAT 0x14
+#define TSTAT_CAPT (1<<1)
+#define TSTAT_COMP (1<<0)
+
+static inline void gpt_irq_disable(void)
+{
+ unsigned int tmp;
+
+ tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
+ __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
+}
+
+static inline void gpt_irq_enable(void)
+{
+ __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
+ TIMER_BASE + MXC_TCTL);
+}
+
+static void gpt_irq_acknowledge(void)
+{
+ __raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT);
+}
+#endif /* CONFIG_ARCH_MX2 */
+
+#ifdef CONFIG_ARCH_MX3
+#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR)
+#define TIMER_INTERRUPT MXC_INT_GPT
+
+#define MXC_TCTL 0x00
+#define TCTL_VAL (TCTL_CLK_IPG | TCTL_WAITEN)
+#define TCTL_CLK_IPG (1<<6)
+#define TCTL_FRR (1<<9)
+#define TCTL_WAITEN (1<<3)
+
+#define MXC_TPRER 0x04
+#define MXC_TSTAT 0x08
+#define TSTAT_OF1 (1<<0)
+#define TSTAT_OF2 (1<<1)
+#define TSTAT_OF3 (1<<2)
+#define TSTAT_IF1 (1<<3)
+#define TSTAT_IF2 (1<<4)
+#define TSTAT_ROV (1<<5)
+#define MXC_IR 0x0c
+#define MXC_TCMP 0x10
+#define MXC_TCMP2 0x14
+#define MXC_TCMP3 0x18
+#define MXC_TCR 0x1c
+#define MXC_TCN 0x24
+
+static inline void gpt_irq_disable(void)
+{
+ __raw_writel(0, TIMER_BASE + MXC_IR);
+}
+
+static inline void gpt_irq_enable(void)
+{
+ __raw_writel(1<<0, TIMER_BASE + MXC_IR);
+}
+
+static inline void gpt_irq_acknowledge(void)
+{
+ __raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT);
+}
+#endif /* CONFIG_ARCH_MX3 */
+
+#define TCTL_SWR (1<<15)
+#define TCTL_CC (1<<10)
+#define TCTL_OM (1<<9)
+#define TCTL_CAP_RIS (1<<6)
+#define TCTL_CAP_FAL (2<<6)
+#define TCTL_CAP_RIS_FAL (3<<6)
+#define TCTL_CAP_ENA (1<<5)
+#define TCTL_TEN (1<<0)
+
+#endif
diff --git a/include/asm-arm/arch-ns9xxx/hardware.h b/include/asm-arm/arch-ns9xxx/hardware.h
index 0b7b34603f1c..0dca11ce21fc 100644
--- a/include/asm-arm/arch-ns9xxx/hardware.h
+++ b/include/asm-arm/arch-ns9xxx/hardware.h
@@ -66,13 +66,13 @@
__REGGET(var, reg ## _ ## field) / __REGSHIFT(reg ## _ ## field)
# define REGGETIM_IDX(var, reg, field, idx) \
- __REGGET(var, reg ## _ ## field((idx))) / \
+ __REGGET(var, reg ## _ ## field((idx))) / \
__REGSHIFT(reg ## _ ## field((idx)))
#else
# define __REG(x) io_p2v(x)
-# define __REG2(x, y) io_p2v((x) + (y))
+# define __REG2(x, y) io_p2v((x) + 4 * (y))
#endif
diff --git a/include/asm-arm/arch-omap/board-2430sdp.h b/include/asm-arm/arch-omap/board-2430sdp.h
index e9c65ce3cb12..c7db9004ec31 100644
--- a/include/asm-arm/arch-omap/board-2430sdp.h
+++ b/include/asm-arm/arch-omap/board-2430sdp.h
@@ -36,9 +36,4 @@
#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ
-/* TWL4030 Primary Interrupt Handler (PIH) interrupts */
-#define IH_TWL4030_BASE IH_BOARD_BASE
-#define IH_TWL4030_END (IH_TWL4030_BASE+8)
-#define NR_IRQS (IH_TWL4030_END)
-
#endif /* __ASM_ARCH_OMAP_2430SDP_H */
diff --git a/include/asm-arm/arch-omap/board-h3.h b/include/asm-arm/arch-omap/board-h3.h
index 0f6404435ea8..c5d0f32a40ac 100644
--- a/include/asm-arm/arch-omap/board-h3.h
+++ b/include/asm-arm/arch-omap/board-h3.h
@@ -30,12 +30,6 @@
/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
#define OMAP1710_ETHR_START 0x04000300
-#define MAXIRQNUM (IH_BOARD_BASE)
-#define MAXFIQNUM MAXIRQNUM
-#define MAXSWINUM MAXIRQNUM
-
-#define NR_IRQS (MAXIRQNUM + 1)
-
extern void h3_mmc_init(void);
extern void h3_mmc_slot_cover_handler(void *arg, int state);
diff --git a/include/asm-arm/arch-omap/board-innovator.h b/include/asm-arm/arch-omap/board-innovator.h
index 56d2c98e143c..9ca03dec9d36 100644
--- a/include/asm-arm/arch-omap/board-innovator.h
+++ b/include/asm-arm/arch-omap/board-innovator.h
@@ -36,9 +36,6 @@
#define OMAP1510P1_EMIFS_PRI_VALUE 0x00
#define OMAP1510P1_EMIFF_PRI_VALUE 0x00
-#define NR_FPGA_IRQS 24
-#define NR_IRQS (IH_BOARD_BASE + NR_FPGA_IRQS)
-
#ifndef __ASSEMBLY__
void fpga_write(unsigned char val, int reg);
unsigned char fpga_read(int reg);
diff --git a/include/asm-arm/arch-omap/board-perseus2.h b/include/asm-arm/arch-omap/board-perseus2.h
index eb74420cb439..d7429cb0f726 100644
--- a/include/asm-arm/arch-omap/board-perseus2.h
+++ b/include/asm-arm/arch-omap/board-perseus2.h
@@ -36,10 +36,4 @@
#define OMAP_SDRAM_DEVICE D256M_1X16_4B
#endif
-#define MAXIRQNUM IH_BOARD_BASE
-#define MAXFIQNUM MAXIRQNUM
-#define MAXSWINUM MAXIRQNUM
-
-#define NR_IRQS (MAXIRQNUM + 1)
-
#endif
diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h
index 12a5e4de9518..4c7b3514f71a 100644
--- a/include/asm-arm/arch-omap/clock.h
+++ b/include/asm-arm/arch-omap/clock.h
@@ -33,12 +33,24 @@ struct dpll_data {
void __iomem *mult_div1_reg;
u32 mult_mask;
u32 div1_mask;
+ u16 last_rounded_m;
+ u8 last_rounded_n;
+ unsigned long last_rounded_rate;
+ unsigned int rate_tolerance;
+ u16 max_multiplier;
+ u8 max_divider;
+ u32 max_tolerance;
# if defined(CONFIG_ARCH_OMAP3)
+ u8 modes;
void __iomem *control_reg;
u32 enable_mask;
u8 auto_recal_bit;
u8 recal_en_bit;
u8 recal_st_bit;
+ void __iomem *autoidle_reg;
+ u32 autoidle_mask;
+ void __iomem *idlest_reg;
+ u8 idlest_bit;
# endif
};
@@ -66,11 +78,14 @@ struct clk {
void __iomem *clksel_reg;
u32 clksel_mask;
const struct clksel *clksel;
- const struct dpll_data *dpll_data;
+ struct dpll_data *dpll_data;
#else
__u8 rate_offset;
__u8 src_offset;
#endif
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+ struct dentry *dent; /* For visible tree hierarchy */
+#endif
};
struct cpufreq_frequency_table;
diff --git a/include/asm-arm/arch-omap/common.h b/include/asm-arm/arch-omap/common.h
index 36a3b62d4d8d..8ac03071f60c 100644
--- a/include/asm-arm/arch-omap/common.h
+++ b/include/asm-arm/arch-omap/common.h
@@ -47,8 +47,23 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
}
#endif
+/* IO bases for various OMAP processors */
+struct omap_globals {
+ void __iomem *tap; /* Control module ID code */
+ void __iomem *sdrc; /* SDRAM Controller */
+ void __iomem *sms; /* SDRAM Memory Scheduler */
+ void __iomem *ctrl; /* System Control Module */
+ void __iomem *prm; /* Power and Reset Management */
+ void __iomem *cm; /* Clock Management */
+};
+
void omap2_set_globals_242x(void);
void omap2_set_globals_243x(void);
void omap2_set_globals_343x(void);
+/* These get called from omap2_set_globals_xxxx(), do not call these */
+void omap2_set_globals_memory(struct omap_globals *);
+void omap2_set_globals_control(struct omap_globals *);
+void omap2_set_globals_prcm(struct omap_globals *);
+
#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/include/asm-arm/arch-omap/control.h b/include/asm-arm/arch-omap/control.h
index 59c0686f8be7..987553e3eeb9 100644
--- a/include/asm-arm/arch-omap/control.h
+++ b/include/asm-arm/arch-omap/control.h
@@ -167,8 +167,7 @@
#ifndef __ASSEMBLY__
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-extern void omap_ctrl_base_set(u32 base);
-extern u32 omap_ctrl_base_get(void);
+extern void __iomem *omap_ctrl_base_get(void);
extern u8 omap_ctrl_readb(u16 offset);
extern u16 omap_ctrl_readw(u16 offset);
extern u32 omap_ctrl_readl(u16 offset);
@@ -176,7 +175,6 @@ extern void omap_ctrl_writeb(u8 val, u16 offset);
extern void omap_ctrl_writew(u16 val, u16 offset);
extern void omap_ctrl_writel(u32 val, u16 offset);
#else
-#define omap_ctrl_base_set(x) WARN_ON(1)
#define omap_ctrl_base_get() 0
#define omap_ctrl_readb(x) 0
#define omap_ctrl_readw(x) 0
diff --git a/include/asm-arm/arch-omap/cpu.h b/include/asm-arm/arch-omap/cpu.h
index e8a4cf52778b..52db09f83281 100644
--- a/include/asm-arm/arch-omap/cpu.h
+++ b/include/asm-arm/arch-omap/cpu.h
@@ -3,7 +3,7 @@
*
* OMAP cpu type detection
*
- * Copyright (C) 2004 Nokia Corporation
+ * Copyright (C) 2004, 2008 Nokia Corporation
*
* Written by Tony Lindgren <tony.lindgren@nokia.com>
*
@@ -26,6 +26,12 @@
#ifndef __ASM_ARCH_OMAP_CPU_H
#define __ASM_ARCH_OMAP_CPU_H
+struct omap_chip_id {
+ u8 oc;
+};
+
+#define OMAP_CHIP_INIT(x) { .oc = x }
+
extern unsigned int system_rev;
#define omap2_cpu_rev() ((system_rev >> 12) & 0x0f)
@@ -345,6 +351,33 @@ IS_OMAP_TYPE(3430, 0x3430)
#define OMAP2430_REV_ES1_0 0x24300000
#define OMAP3430_REV_ES1_0 0x34300000
#define OMAP3430_REV_ES2_0 0x34301000
+#define OMAP3430_REV_ES2_1 0x34302000
+#define OMAP3430_REV_ES2_2 0x34303000
+
+/*
+ * omap_chip bits
+ *
+ * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is
+ * valid on all chips of that type. CHIP_IS_OMAP3430ES{1,2} indicates
+ * something that is only valid on that particular ES revision.
+ *
+ * These bits may be ORed together to indicate structures that are
+ * available on multiple chip types.
+ *
+ * To test whether a particular structure matches the current OMAP chip type,
+ * use omap_chip_is().
+ *
+ */
+#define CHIP_IS_OMAP2420 (1 << 0)
+#define CHIP_IS_OMAP2430 (1 << 1)
+#define CHIP_IS_OMAP3430 (1 << 2)
+#define CHIP_IS_OMAP3430ES1 (1 << 3)
+#define CHIP_IS_OMAP3430ES2 (1 << 4)
+
+#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
+
+int omap_chip_is(struct omap_chip_id oci);
+
/*
* Macro to detect device type i.e. EMU/HS/TST/GP/BAD
@@ -362,6 +395,8 @@ IS_OMAP_TYPE(3430, 0x3430)
#define is_device_type_gp() (get_device_type() == DEVICE_TYPE_GP)
#define is_device_type_bad() (get_device_type() == DEVICE_TYPE_BAD)
-#endif
+void omap2_check_revision(void);
+
+#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
#endif
diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h
index 24acf090030d..f4dcb9587869 100644
--- a/include/asm-arm/arch-omap/dma.h
+++ b/include/asm-arm/arch-omap/dma.h
@@ -22,108 +22,128 @@
#define __ASM_ARCH_DMA_H
/* Hardware registers for omap1 */
-#define OMAP_DMA_BASE (0xfffed800)
-#define OMAP_DMA_GCR (OMAP_DMA_BASE + 0x400)
-#define OMAP_DMA_GSCR (OMAP_DMA_BASE + 0x404)
-#define OMAP_DMA_GRST (OMAP_DMA_BASE + 0x408)
-#define OMAP_DMA_HW_ID (OMAP_DMA_BASE + 0x442)
-#define OMAP_DMA_PCH2_ID (OMAP_DMA_BASE + 0x444)
-#define OMAP_DMA_PCH0_ID (OMAP_DMA_BASE + 0x446)
-#define OMAP_DMA_PCH1_ID (OMAP_DMA_BASE + 0x448)
-#define OMAP_DMA_PCHG_ID (OMAP_DMA_BASE + 0x44a)
-#define OMAP_DMA_PCHD_ID (OMAP_DMA_BASE + 0x44c)
-#define OMAP_DMA_CAPS_0_U (OMAP_DMA_BASE + 0x44e)
-#define OMAP_DMA_CAPS_0_L (OMAP_DMA_BASE + 0x450)
-#define OMAP_DMA_CAPS_1_U (OMAP_DMA_BASE + 0x452)
-#define OMAP_DMA_CAPS_1_L (OMAP_DMA_BASE + 0x454)
-#define OMAP_DMA_CAPS_2 (OMAP_DMA_BASE + 0x456)
-#define OMAP_DMA_CAPS_3 (OMAP_DMA_BASE + 0x458)
-#define OMAP_DMA_CAPS_4 (OMAP_DMA_BASE + 0x45a)
-#define OMAP_DMA_PCH2_SR (OMAP_DMA_BASE + 0x460)
-#define OMAP_DMA_PCH0_SR (OMAP_DMA_BASE + 0x480)
-#define OMAP_DMA_PCH1_SR (OMAP_DMA_BASE + 0x482)
-#define OMAP_DMA_PCHD_SR (OMAP_DMA_BASE + 0x4c0)
-
-/* Hardware registers for omap2 */
-#if defined(CONFIG_ARCH_OMAP3)
-#define OMAP_DMA4_BASE (L4_34XX_BASE + 0x56000)
-#else /* CONFIG_ARCH_OMAP2 */
-#define OMAP_DMA4_BASE (L4_24XX_BASE + 0x56000)
-#endif
-
-#define OMAP_DMA4_REVISION (OMAP_DMA4_BASE + 0x00)
-#define OMAP_DMA4_GCR_REG (OMAP_DMA4_BASE + 0x78)
-#define OMAP_DMA4_IRQSTATUS_L0 (OMAP_DMA4_BASE + 0x08)
-#define OMAP_DMA4_IRQSTATUS_L1 (OMAP_DMA4_BASE + 0x0c)
-#define OMAP_DMA4_IRQSTATUS_L2 (OMAP_DMA4_BASE + 0x10)
-#define OMAP_DMA4_IRQSTATUS_L3 (OMAP_DMA4_BASE + 0x14)
-#define OMAP_DMA4_IRQENABLE_L0 (OMAP_DMA4_BASE + 0x18)
-#define OMAP_DMA4_IRQENABLE_L1 (OMAP_DMA4_BASE + 0x1c)
-#define OMAP_DMA4_IRQENABLE_L2 (OMAP_DMA4_BASE + 0x20)
-#define OMAP_DMA4_IRQENABLE_L3 (OMAP_DMA4_BASE + 0x24)
-#define OMAP_DMA4_SYSSTATUS (OMAP_DMA4_BASE + 0x28)
-#define OMAP_DMA4_OCP_SYSCONFIG (OMAP_DMA4_BASE + 0x2c)
-#define OMAP_DMA4_CAPS_0 (OMAP_DMA4_BASE + 0x64)
-#define OMAP_DMA4_CAPS_2 (OMAP_DMA4_BASE + 0x6c)
-#define OMAP_DMA4_CAPS_3 (OMAP_DMA4_BASE + 0x70)
-#define OMAP_DMA4_CAPS_4 (OMAP_DMA4_BASE + 0x74)
-
-#ifdef CONFIG_ARCH_OMAP1
-
-#define OMAP_LOGICAL_DMA_CH_COUNT 17
+#define OMAP1_DMA_BASE (0xfffed800)
+
+#define OMAP1_DMA_GCR 0x400
+#define OMAP1_DMA_GSCR 0x404
+#define OMAP1_DMA_GRST 0x408
+#define OMAP1_DMA_HW_ID 0x442
+#define OMAP1_DMA_PCH2_ID 0x444
+#define OMAP1_DMA_PCH0_ID 0x446
+#define OMAP1_DMA_PCH1_ID 0x448
+#define OMAP1_DMA_PCHG_ID 0x44a
+#define OMAP1_DMA_PCHD_ID 0x44c
+#define OMAP1_DMA_CAPS_0_U 0x44e
+#define OMAP1_DMA_CAPS_0_L 0x450
+#define OMAP1_DMA_CAPS_1_U 0x452
+#define OMAP1_DMA_CAPS_1_L 0x454
+#define OMAP1_DMA_CAPS_2 0x456
+#define OMAP1_DMA_CAPS_3 0x458
+#define OMAP1_DMA_CAPS_4 0x45a
+#define OMAP1_DMA_PCH2_SR 0x460
+#define OMAP1_DMA_PCH0_SR 0x480
+#define OMAP1_DMA_PCH1_SR 0x482
+#define OMAP1_DMA_PCHD_SR 0x4c0
+
+/* Hardware registers for omap2 and omap3 */
+#define OMAP24XX_DMA4_BASE (L4_24XX_BASE + 0x56000)
+#define OMAP34XX_DMA4_BASE (L4_34XX_BASE + 0x56000)
+
+#define OMAP_DMA4_REVISION 0x00
+#define OMAP_DMA4_GCR 0x78
+#define OMAP_DMA4_IRQSTATUS_L0 0x08
+#define OMAP_DMA4_IRQSTATUS_L1 0x0c
+#define OMAP_DMA4_IRQSTATUS_L2 0x10
+#define OMAP_DMA4_IRQSTATUS_L3 0x14
+#define OMAP_DMA4_IRQENABLE_L0 0x18
+#define OMAP_DMA4_IRQENABLE_L1 0x1c
+#define OMAP_DMA4_IRQENABLE_L2 0x20
+#define OMAP_DMA4_IRQENABLE_L3 0x24
+#define OMAP_DMA4_SYSSTATUS 0x28
+#define OMAP_DMA4_OCP_SYSCONFIG 0x2c
+#define OMAP_DMA4_CAPS_0 0x64
+#define OMAP_DMA4_CAPS_2 0x6c
+#define OMAP_DMA4_CAPS_3 0x70
+#define OMAP_DMA4_CAPS_4 0x74
+
+#define OMAP1_LOGICAL_DMA_CH_COUNT 17
+#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT 32 /* REVISIT: Is this 32 + 2? */
/* Common channel specific registers for omap1 */
-#define OMAP_DMA_CSDP_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x00)
-#define OMAP_DMA_CCR_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x02)
-#define OMAP_DMA_CICR_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x04)
-#define OMAP_DMA_CSR_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x06)
-#define OMAP_DMA_CEN_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x10)
-#define OMAP_DMA_CFN_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x12)
-#define OMAP_DMA_CSFI_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x14)
-#define OMAP_DMA_CSEI_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x16)
-#define OMAP_DMA_CSAC_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x18)
-#define OMAP_DMA_CDAC_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x1a)
-#define OMAP_DMA_CDEI_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x1c)
-#define OMAP_DMA_CDFI_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x1e)
-#define OMAP_DMA_CLNK_CTRL_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x28)
-
-#else
-
-#define OMAP_LOGICAL_DMA_CH_COUNT 32 /* REVISIT: Is this 32 + 2? */
+#define OMAP1_DMA_CH_BASE(n) (0x40 * (n) + 0x00)
+#define OMAP1_DMA_CSDP(n) (0x40 * (n) + 0x00)
+#define OMAP1_DMA_CCR(n) (0x40 * (n) + 0x02)
+#define OMAP1_DMA_CICR(n) (0x40 * (n) + 0x04)
+#define OMAP1_DMA_CSR(n) (0x40 * (n) + 0x06)
+#define OMAP1_DMA_CEN(n) (0x40 * (n) + 0x10)
+#define OMAP1_DMA_CFN(n) (0x40 * (n) + 0x12)
+#define OMAP1_DMA_CSFI(n) (0x40 * (n) + 0x14)
+#define OMAP1_DMA_CSEI(n) (0x40 * (n) + 0x16)
+#define OMAP1_DMA_CPC(n) (0x40 * (n) + 0x18) /* 15xx only */
+#define OMAP1_DMA_CSAC(n) (0x40 * (n) + 0x18)
+#define OMAP1_DMA_CDAC(n) (0x40 * (n) + 0x1a)
+#define OMAP1_DMA_CDEI(n) (0x40 * (n) + 0x1c)
+#define OMAP1_DMA_CDFI(n) (0x40 * (n) + 0x1e)
+#define OMAP1_DMA_CLNK_CTRL(n) (0x40 * (n) + 0x28)
/* Common channel specific registers for omap2 */
-#define OMAP_DMA_CCR_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x80)
-#define OMAP_DMA_CLNK_CTRL_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x84)
-#define OMAP_DMA_CICR_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x88)
-#define OMAP_DMA_CSR_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x8c)
-#define OMAP_DMA_CSDP_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x90)
-#define OMAP_DMA_CEN_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x94)
-#define OMAP_DMA_CFN_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x98)
-#define OMAP_DMA_CSEI_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xa4)
-#define OMAP_DMA_CSFI_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xa8)
-#define OMAP_DMA_CDEI_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xac)
-#define OMAP_DMA_CDFI_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xb0)
-#define OMAP_DMA_CSAC_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xb4)
-#define OMAP_DMA_CDAC_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xb8)
-
-#endif
+#define OMAP_DMA4_CH_BASE(n) (0x60 * (n) + 0x80)
+#define OMAP_DMA4_CCR(n) (0x60 * (n) + 0x80)
+#define OMAP_DMA4_CLNK_CTRL(n) (0x60 * (n) + 0x84)
+#define OMAP_DMA4_CICR(n) (0x60 * (n) + 0x88)
+#define OMAP_DMA4_CSR(n) (0x60 * (n) + 0x8c)
+#define OMAP_DMA4_CSDP(n) (0x60 * (n) + 0x90)
+#define OMAP_DMA4_CEN(n) (0x60 * (n) + 0x94)
+#define OMAP_DMA4_CFN(n) (0x60 * (n) + 0x98)
+#define OMAP_DMA4_CSEI(n) (0x60 * (n) + 0xa4)
+#define OMAP_DMA4_CSFI(n) (0x60 * (n) + 0xa8)
+#define OMAP_DMA4_CDEI(n) (0x60 * (n) + 0xac)
+#define OMAP_DMA4_CDFI(n) (0x60 * (n) + 0xb0)
+#define OMAP_DMA4_CSAC(n) (0x60 * (n) + 0xb4)
+#define OMAP_DMA4_CDAC(n) (0x60 * (n) + 0xb8)
/* Channel specific registers only on omap1 */
-#define OMAP1_DMA_CSSA_L_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x08)
-#define OMAP1_DMA_CSSA_U_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x0a)
-#define OMAP1_DMA_CDSA_L_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x0c)
-#define OMAP1_DMA_CDSA_U_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x0e)
-#define OMAP1_DMA_COLOR_L_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x20)
-#define OMAP1_DMA_CCR2_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x24)
-#define OMAP1_DMA_COLOR_U_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x22)
-#define OMAP1_DMA_LCH_CTRL_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x2a)
+#define OMAP1_DMA_CSSA_L(n) (0x40 * (n) + 0x08)
+#define OMAP1_DMA_CSSA_U(n) (0x40 * (n) + 0x0a)
+#define OMAP1_DMA_CDSA_L(n) (0x40 * (n) + 0x0c)
+#define OMAP1_DMA_CDSA_U(n) (0x40 * (n) + 0x0e)
+#define OMAP1_DMA_COLOR_L(n) (0x40 * (n) + 0x20)
+#define OMAP1_DMA_COLOR_U(n) (0x40 * (n) + 0x22)
+#define OMAP1_DMA_CCR2(n) (0x40 * (n) + 0x24)
+#define OMAP1_DMA_LCH_CTRL(n) (0x40 * (n) + 0x2a) /* not on 15xx */
+#define OMAP1_DMA_CCEN(n) 0
+#define OMAP1_DMA_CCFN(n) 0
/* Channel specific registers only on omap2 */
-#define OMAP2_DMA_CSSA_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x9c)
-#define OMAP2_DMA_CDSA_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xa0)
-#define OMAP2_DMA_CCEN_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xbc)
-#define OMAP2_DMA_CCFN_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xc0)
-#define OMAP2_DMA_COLOR_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xc4)
+#define OMAP_DMA4_CSSA(n) (0x60 * (n) + 0x9c)
+#define OMAP_DMA4_CDSA(n) (0x60 * (n) + 0xa0)
+#define OMAP_DMA4_CCEN(n) (0x60 * (n) + 0xbc)
+#define OMAP_DMA4_CCFN(n) (0x60 * (n) + 0xc0)
+#define OMAP_DMA4_COLOR(n) (0x60 * (n) + 0xc4)
+
+/* Dummy defines to keep multi-omap compiles happy */
+#define OMAP1_DMA_REVISION 0
+#define OMAP1_DMA_IRQSTATUS_L0 0
+#define OMAP1_DMA_IRQENABLE_L0 0
+#define OMAP1_DMA_OCP_SYSCONFIG 0
+#define OMAP_DMA4_HW_ID 0
+#define OMAP_DMA4_CAPS_0_L 0
+#define OMAP_DMA4_CAPS_0_U 0
+#define OMAP_DMA4_CAPS_1_L 0
+#define OMAP_DMA4_CAPS_1_U 0
+#define OMAP_DMA4_GSCR 0
+#define OMAP_DMA4_CPC(n) 0
+
+#define OMAP_DMA4_LCH_CTRL(n) 0
+#define OMAP_DMA4_COLOR_L(n) 0
+#define OMAP_DMA4_COLOR_U(n) 0
+#define OMAP_DMA4_CCR2(n) 0
+#define OMAP1_DMA_CSSA(n) 0
+#define OMAP1_DMA_CDSA(n) 0
+#define OMAP_DMA4_CSSA_L(n) 0
+#define OMAP_DMA4_CSSA_U(n) 0
+#define OMAP_DMA4_CDSA_L(n) 0
+#define OMAP_DMA4_CDSA_U(n) 0
/*----------------------------------------------------------------------------*/
@@ -196,63 +216,98 @@
#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */
#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */
#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */
-#define OMAP24XX_DMA_VLYNQ_TX 7 /* S_DMA_6 */
+#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */
+#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */
#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */
#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */
#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */
#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */
#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */
#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */
-#define OMAP24XX_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */
-#define OMAP24XX_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */
-#define OMAP24XX_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */
-#define OMAP24XX_DMA_EAC_AC_RD 17 /* S_DMA_16 */
-#define OMAP24XX_DMA_EAC_AC_WR 18 /* S_DMA_17 */
-#define OMAP24XX_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */
-#define OMAP24XX_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */
-#define OMAP24XX_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */
-#define OMAP24XX_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */
-#define OMAP24XX_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */
-#define OMAP24XX_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */
-#define OMAP24XX_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */
-#define OMAP24XX_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */
+#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */
+#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */
+#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */
+#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */
+#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */
+#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */
+#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */
+#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */
+#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */
+#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */
+#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */
+#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */
+#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */
+#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */
+#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */
+#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */
+#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */
+#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */
+#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */
+#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */
+#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */
+#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */
+#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */
+#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */
+#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */
+#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */
+#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */
+#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */
+#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */
#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */
#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */
#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */
#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */
-#define OMAP24XX_DMA_MCBSP1_TX 31 /* SDMA_30 */
-#define OMAP24XX_DMA_MCBSP1_RX 32 /* SDMA_31 */
-#define OMAP24XX_DMA_MCBSP2_TX 33 /* SDMA_32 */
-#define OMAP24XX_DMA_MCBSP2_RX 34 /* SDMA_33 */
-#define OMAP24XX_DMA_SPI1_TX0 35 /* SDMA_34 */
-#define OMAP24XX_DMA_SPI1_RX0 36 /* SDMA_35 */
-#define OMAP24XX_DMA_SPI1_TX1 37 /* SDMA_36 */
-#define OMAP24XX_DMA_SPI1_RX1 38 /* SDMA_37 */
-#define OMAP24XX_DMA_SPI1_TX2 39 /* SDMA_38 */
-#define OMAP24XX_DMA_SPI1_RX2 40 /* SDMA_39 */
-#define OMAP24XX_DMA_SPI1_TX3 41 /* SDMA_40 */
-#define OMAP24XX_DMA_SPI1_RX3 42 /* SDMA_41 */
-#define OMAP24XX_DMA_SPI2_TX0 43 /* SDMA_42 */
-#define OMAP24XX_DMA_SPI2_RX0 44 /* SDMA_43 */
-#define OMAP24XX_DMA_SPI2_TX1 45 /* SDMA_44 */
-#define OMAP24XX_DMA_SPI2_RX1 46 /* SDMA_45 */
-
-#define OMAP24XX_DMA_UART1_TX 49 /* SDMA_48 */
-#define OMAP24XX_DMA_UART1_RX 50 /* SDMA_49 */
-#define OMAP24XX_DMA_UART2_TX 51 /* SDMA_50 */
-#define OMAP24XX_DMA_UART2_RX 52 /* SDMA_51 */
-#define OMAP24XX_DMA_UART3_TX 53 /* SDMA_52 */
-#define OMAP24XX_DMA_UART3_RX 54 /* SDMA_53 */
-#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* SDMA_54 */
-#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* SDMA_55 */
-#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* SDMA_56 */
-#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* SDMA_57 */
-#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* SDMA_58 */
-#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* SDMA_59 */
-#define OMAP24XX_DMA_MMC1_TX 61 /* SDMA_60 */
-#define OMAP24XX_DMA_MMC1_RX 62 /* SDMA_61 */
-#define OMAP24XX_DMA_MS 63 /* SDMA_62 */
-#define OMAP24XX_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */
+#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */
+#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */
+#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */
+#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */
+#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */
+#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */
+#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */
+#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */
+#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */
+#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */
+#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */
+#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */
+#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */
+#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */
+#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */
+#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */
+#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */
+#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */
+#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */
+#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */
+#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */
+#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */
+#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */
+#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */
+#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */
+#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */
+#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */
+#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */
+#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */
+#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */
+#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */
+#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */
+#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */
+#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */
+#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */
+#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */
+#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */
+#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */
+#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */
+#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */
+#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */
+#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */
+#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */
+#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */
+#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */
+#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */
+#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */
+#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */
+#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */
+#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */
+#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */
/*----------------------------------------------------------------------------*/
@@ -358,6 +413,11 @@ enum omap_dma_burst_mode {
OMAP_DMA_DATA_BURST_16,
};
+enum end_type {
+ OMAP_DMA_LITTLE_ENDIAN = 0,
+ OMAP_DMA_BIG_ENDIAN
+};
+
enum omap_dma_color_mode {
OMAP_DMA_COLOR_DIS = 0,
OMAP_DMA_CONSTANT_FILL,
@@ -370,24 +430,34 @@ enum omap_dma_write_mode {
OMAP_DMA_WRITE_LAST_NON_POSTED
};
+enum omap_dma_channel_mode {
+ OMAP_DMA_LCH_2D = 0,
+ OMAP_DMA_LCH_G,
+ OMAP_DMA_LCH_P,
+ OMAP_DMA_LCH_PD
+};
+
struct omap_dma_channel_params {
int data_type; /* data type 8,16,32 */
int elem_count; /* number of elements in a frame */
int frame_count; /* number of frames in a element */
int src_port; /* Only on OMAP1 REVISIT: Is this needed? */
- int src_amode; /* constant , post increment, indexed , double indexed */
+ int src_amode; /* constant, post increment, indexed,
+ double indexed */
unsigned long src_start; /* source address : physical */
int src_ei; /* source element index */
int src_fi; /* source frame index */
int dst_port; /* Only on OMAP1 REVISIT: Is this needed? */
- int dst_amode; /* constant , post increment, indexed , double indexed */
+ int dst_amode; /* constant, post increment, indexed,
+ double indexed */
unsigned long dst_start; /* source address : physical */
int dst_ei; /* source element index */
int dst_fi; /* source frame index */
- int trigger; /* trigger attached if the channel is synchronized */
+ int trigger; /* trigger attached if the channel is
+ synchronized */
int sync_mode; /* sycn on element, frame , block or packet */
int src_or_dst_synch; /* source synch(1) or destination synch(0) */
@@ -404,8 +474,8 @@ struct omap_dma_channel_params {
extern void omap_set_dma_priority(int lch, int dst_port, int priority);
extern int omap_request_dma(int dev_id, const char *dev_name,
- void (* callback)(int lch, u16 ch_status, void *data),
- void *data, int *dma_ch);
+ void (*callback)(int lch, u16 ch_status, void *data),
+ void *data, int *dma_ch);
extern void omap_enable_dma_irq(int ch, u16 irq_bits);
extern void omap_disable_dma_irq(int ch, u16 irq_bits);
extern void omap_free_dma(int ch);
@@ -418,6 +488,7 @@ extern void omap_set_dma_transfer_params(int lch, int data_type,
extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode,
u32 color);
extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode);
+extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode);
extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
unsigned long src_start,
@@ -436,23 +507,26 @@ extern void omap_set_dma_dest_burst_mode(int lch,
enum omap_dma_burst_mode burst_mode);
extern void omap_set_dma_params(int lch,
- struct omap_dma_channel_params * params);
+ struct omap_dma_channel_params *params);
-extern void omap_dma_link_lch (int lch_head, int lch_queue);
-extern void omap_dma_unlink_lch (int lch_head, int lch_queue);
+extern void omap_dma_link_lch(int lch_head, int lch_queue);
+extern void omap_dma_unlink_lch(int lch_head, int lch_queue);
extern int omap_set_dma_callback(int lch,
- void (* callback)(int lch, u16 ch_status, void *data),
+ void (*callback)(int lch, u16 ch_status, void *data),
void *data);
extern dma_addr_t omap_get_dma_src_pos(int lch);
extern dma_addr_t omap_get_dma_dst_pos(int lch);
-extern int omap_get_dma_src_addr_counter(int lch);
extern void omap_clear_dma(int lch);
+extern int omap_get_dma_active_status(int lch);
extern int omap_dma_running(void);
extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth,
int tparams);
extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio,
unsigned char write_prio);
+extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype);
+extern void omap_set_dma_src_endian_type(int lch, enum end_type etype);
+extern int omap_get_dma_index(int lch, int *ei, int *fi);
/* Chaining APIs */
#ifndef CONFIG_ARCH_OMAP1
@@ -478,7 +552,7 @@ extern int omap_dma_chain_status(int chain_id);
#endif
/* LCD DMA functions */
-extern int omap_request_lcd_dma(void (* callback)(u16 status, void *data),
+extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
void *data);
extern void omap_free_lcd_dma(void);
extern void omap_setup_lcd_dma(void);
diff --git a/include/asm-arm/arch-omap/dmtimer.h b/include/asm-arm/arch-omap/dmtimer.h
index fefb276ed402..02b29e8437ae 100644
--- a/include/asm-arm/arch-omap/dmtimer.h
+++ b/include/asm-arm/arch-omap/dmtimer.h
@@ -66,6 +66,7 @@ void omap_dm_timer_stop(struct omap_dm_timer *timer);
void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
diff --git a/include/asm-arm/arch-omap/fpga.h b/include/asm-arm/arch-omap/fpga.h
index 6a883e0bdbb8..f420881d2a3b 100644
--- a/include/asm-arm/arch-omap/fpga.h
+++ b/include/asm-arm/arch-omap/fpga.h
@@ -169,30 +169,29 @@ struct h2p2_dbg_fpga {
#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13)
/* IRQ Numbers for interrupts muxed through the FPGA */
-#define OMAP1510_IH_FPGA_BASE IH_BOARD_BASE
-#define OMAP1510_INT_FPGA_ATN (OMAP1510_IH_FPGA_BASE + 0)
-#define OMAP1510_INT_FPGA_ACK (OMAP1510_IH_FPGA_BASE + 1)
-#define OMAP1510_INT_FPGA2 (OMAP1510_IH_FPGA_BASE + 2)
-#define OMAP1510_INT_FPGA3 (OMAP1510_IH_FPGA_BASE + 3)
-#define OMAP1510_INT_FPGA4 (OMAP1510_IH_FPGA_BASE + 4)
-#define OMAP1510_INT_FPGA5 (OMAP1510_IH_FPGA_BASE + 5)
-#define OMAP1510_INT_FPGA6 (OMAP1510_IH_FPGA_BASE + 6)
-#define OMAP1510_INT_FPGA7 (OMAP1510_IH_FPGA_BASE + 7)
-#define OMAP1510_INT_FPGA8 (OMAP1510_IH_FPGA_BASE + 8)
-#define OMAP1510_INT_FPGA9 (OMAP1510_IH_FPGA_BASE + 9)
-#define OMAP1510_INT_FPGA10 (OMAP1510_IH_FPGA_BASE + 10)
-#define OMAP1510_INT_FPGA11 (OMAP1510_IH_FPGA_BASE + 11)
-#define OMAP1510_INT_FPGA12 (OMAP1510_IH_FPGA_BASE + 12)
-#define OMAP1510_INT_ETHER (OMAP1510_IH_FPGA_BASE + 13)
-#define OMAP1510_INT_FPGAUART1 (OMAP1510_IH_FPGA_BASE + 14)
-#define OMAP1510_INT_FPGAUART2 (OMAP1510_IH_FPGA_BASE + 15)
-#define OMAP1510_INT_FPGA_TS (OMAP1510_IH_FPGA_BASE + 16)
-#define OMAP1510_INT_FPGA17 (OMAP1510_IH_FPGA_BASE + 17)
-#define OMAP1510_INT_FPGA_CAM (OMAP1510_IH_FPGA_BASE + 18)
-#define OMAP1510_INT_FPGA_RTC_A (OMAP1510_IH_FPGA_BASE + 19)
-#define OMAP1510_INT_FPGA_RTC_B (OMAP1510_IH_FPGA_BASE + 20)
-#define OMAP1510_INT_FPGA_CD (OMAP1510_IH_FPGA_BASE + 21)
-#define OMAP1510_INT_FPGA22 (OMAP1510_IH_FPGA_BASE + 22)
-#define OMAP1510_INT_FPGA23 (OMAP1510_IH_FPGA_BASE + 23)
+#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0)
+#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1)
+#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2)
+#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3)
+#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4)
+#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5)
+#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6)
+#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7)
+#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8)
+#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9)
+#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10)
+#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11)
+#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12)
+#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13)
+#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14)
+#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15)
+#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16)
+#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17)
+#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18)
+#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19)
+#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20)
+#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21)
+#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22)
+#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23)
#endif
diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h
index 91d85b3417b7..45fdfccbd5d4 100644
--- a/include/asm-arm/arch-omap/hardware.h
+++ b/include/asm-arm/arch-omap/hardware.h
@@ -284,6 +284,7 @@
#include "omap1510.h"
#include "omap24xx.h"
#include "omap16xx.h"
+#include "omap34xx.h"
#ifndef __ASSEMBLER__
diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h
index 160578e1f557..0b13557fd30b 100644
--- a/include/asm-arm/arch-omap/io.h
+++ b/include/asm-arm/arch-omap/io.h
@@ -60,6 +60,7 @@
#define IO_SIZE 0x40000
#define IO_VIRT (IO_PHYS - IO_OFFSET)
#define IO_ADDRESS(pa) ((pa) - IO_OFFSET)
+#define OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET)
#define io_p2v(pa) ((pa) - IO_OFFSET)
#define io_v2p(va) ((va) + IO_OFFSET)
@@ -91,6 +92,7 @@
#define IO_OFFSET 0x90000000
#define IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
+#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
#define io_p2v(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */
@@ -148,6 +150,7 @@
#define IO_OFFSET 0x90000000
#define IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
#define io_p2v(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */
@@ -183,35 +186,12 @@
#define omap_writew(v,a) (*(volatile unsigned short *)IO_ADDRESS(a) = (v))
#define omap_writel(v,a) (*(volatile unsigned int *)IO_ADDRESS(a) = (v))
-/* 16 bit uses LDRH/STRH, base +/- offset_8 */
-typedef struct { volatile u16 offset[256]; } __regbase16;
-#define __REGV16(vaddr) ((__regbase16 *)((vaddr)&~0xff)) \
- ->offset[((vaddr)&0xff)>>1]
-#define __REG16(paddr) __REGV16(io_p2v(paddr))
-
-/* 8/32 bit uses LDR/STR, base +/- offset_12 */
-typedef struct { volatile u8 offset[4096]; } __regbase8;
-#define __REGV8(vaddr) ((__regbase8 *)((vaddr)&~4095)) \
- ->offset[((vaddr)&4095)>>0]
-#define __REG8(paddr) __REGV8(io_p2v(paddr))
-
-typedef struct { volatile u32 offset[4096]; } __regbase32;
-#define __REGV32(vaddr) ((__regbase32 *)((vaddr)&~4095)) \
- ->offset[((vaddr)&4095)>>2]
-#define __REG32(paddr) __REGV32(io_p2v(paddr))
-
extern void omap1_map_common_io(void);
extern void omap1_init_common_hw(void);
extern void omap2_map_common_io(void);
extern void omap2_init_common_hw(void);
-#else
-
-#define __REG8(paddr) io_p2v(paddr)
-#define __REG16(paddr) io_p2v(paddr)
-#define __REG32(paddr) io_p2v(paddr)
-
#endif
#endif
diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h
index 87973654e625..7464c694859b 100644
--- a/include/asm-arm/arch-omap/irqs.h
+++ b/include/asm-arm/arch-omap/irqs.h
@@ -285,7 +285,41 @@
#define OMAP_MAX_GPIO_LINES 192
#define IH_GPIO_BASE (128 + IH2_BASE)
#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
-#define IH_BOARD_BASE (16 + IH_MPUIO_BASE)
+#define OMAP_IRQ_END (IH_MPUIO_BASE + 16)
+
+/* External FPGA handles interrupts on Innovator boards */
+#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END)
+#ifdef CONFIG_MACH_OMAP_INNOVATOR
+#define OMAP_FPGA_NR_IRQS 24
+#else
+#define OMAP_FPGA_NR_IRQS 0
+#endif
+#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
+
+/* External TWL4030 can handle interrupts on 2430 and 34xx boards */
+#define TWL4030_IRQ_BASE (OMAP_FPGA_IRQ_END)
+#ifdef CONFIG_TWL4030_CORE
+#define TWL4030_BASE_NR_IRQS 8
+#define TWL4030_PWR_NR_IRQS 8
+#else
+#define TWL4030_BASE_NR_IRQS 0
+#define TWL4030_PWR_NR_IRQS 0
+#endif
+#define TWL4030_IRQ_END (TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS)
+#define TWL4030_PWR_IRQ_BASE TWL4030_IRQ_END
+#define TWL4030_PWR_IRQ_END (TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS)
+
+/* External TWL4030 gpio interrupts are optional */
+#define TWL4030_GPIO_IRQ_BASE TWL4030_PWR_IRQ_END
+#ifdef CONFIG_TWL4030_GPIO
+#define TWL4030_GPIO_NR_IRQS 18
+#else
+#define TWL4030_GPIO_NR_IRQS 0
+#endif
+#define TWL4030_GPIO_IRQ_END (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
+
+/* Total number of interrupts depends on the enabled blocks above */
+#define NR_IRQS TWL4030_GPIO_IRQ_END
#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))
@@ -293,14 +327,6 @@
extern void omap_init_irq(void);
#endif
-/*
- * The definition of NR_IRQS is in board-specific header file, which is
- * included via hardware.h
- */
#include <asm/hardware.h>
-#ifndef NR_IRQS
-#define NR_IRQS IH_BOARD_BASE
-#endif
-
#endif
diff --git a/include/asm-arm/arch-omap/mcbsp.h b/include/asm-arm/arch-omap/mcbsp.h
index c7a0cc1c4e93..26c78f67dc8e 100644
--- a/include/asm-arm/arch-omap/mcbsp.h
+++ b/include/asm-arm/arch-omap/mcbsp.h
@@ -24,7 +24,11 @@
#ifndef __ASM_ARCH_OMAP_MCBSP_H
#define __ASM_ARCH_OMAP_MCBSP_H
+#include <linux/completion.h>
+#include <linux/spinlock.h>
+
#include <asm/hardware.h>
+#include <asm/arch/clock.h>
#define OMAP730_MCBSP1_BASE 0xfffb1000
#define OMAP730_MCBSP2_BASE 0xfffb1800
@@ -40,6 +44,9 @@
#define OMAP24XX_MCBSP1_BASE 0x48074000
#define OMAP24XX_MCBSP2_BASE 0x48076000
+#define OMAP34XX_MCBSP1_BASE 0x48074000
+#define OMAP34XX_MCBSP2_BASE 0x49022000
+
#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
#define OMAP_MCBSP_REG_DRR2 0x00
@@ -74,7 +81,8 @@
#define OMAP_MCBSP_REG_XCERG 0x3A
#define OMAP_MCBSP_REG_XCERH 0x3C
-#define OMAP_MAX_MCBSP_COUNT 3
+#define OMAP_MAX_MCBSP_COUNT 3
+#define MAX_MCBSP_CLOCKS 3
#define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
#define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
@@ -117,7 +125,8 @@
#define OMAP_MCBSP_REG_XCERG 0x74
#define OMAP_MCBSP_REG_XCERH 0x78
-#define OMAP_MAX_MCBSP_COUNT 2
+#define OMAP_MAX_MCBSP_COUNT 2
+#define MAX_MCBSP_CLOCKS 2
#define AUDIO_MCBSP_DATAWRITE (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
#define AUDIO_MCBSP_DATAREAD (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
@@ -298,6 +307,55 @@ struct omap_mcbsp_spi_cfg {
omap_mcbsp_word_length word_length;
};
+/* Platform specific configuration */
+struct omap_mcbsp_ops {
+ void (*request)(unsigned int);
+ void (*free)(unsigned int);
+ int (*check)(unsigned int);
+};
+
+struct omap_mcbsp_platform_data {
+ u32 virt_base;
+ u8 dma_rx_sync, dma_tx_sync;
+ u16 rx_irq, tx_irq;
+ struct omap_mcbsp_ops *ops;
+ char const *clk_name;
+};
+
+struct omap_mcbsp {
+ struct device *dev;
+ u32 io_base;
+ u8 id;
+ u8 free;
+ omap_mcbsp_word_length rx_word_length;
+ omap_mcbsp_word_length tx_word_length;
+
+ omap_mcbsp_io_type_t io_type; /* IRQ or poll */
+ /* IRQ based TX/RX */
+ int rx_irq;
+ int tx_irq;
+
+ /* DMA stuff */
+ u8 dma_rx_sync;
+ short dma_rx_lch;
+ u8 dma_tx_sync;
+ short dma_tx_lch;
+
+ /* Completion queues */
+ struct completion tx_irq_completion;
+ struct completion rx_irq_completion;
+ struct completion tx_dma_completion;
+ struct completion rx_dma_completion;
+
+ /* Protect the field .free, while checking if the mcbsp is in use */
+ spinlock_t lock;
+ struct omap_mcbsp_platform_data *pdata;
+ struct clk *clk;
+};
+
+int omap_mcbsp_init(void);
+void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
+ int size);
void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
int omap_mcbsp_request(unsigned int id);
void omap_mcbsp_free(unsigned int id);
diff --git a/include/asm-arm/arch-omap/omap34xx.h b/include/asm-arm/arch-omap/omap34xx.h
new file mode 100644
index 000000000000..aa30c6d10abd
--- /dev/null
+++ b/include/asm-arm/arch-omap/omap34xx.h
@@ -0,0 +1,72 @@
+/*
+ * include/asm-arm/arch-omap/omap34xx.h
+ *
+ * This file contains the processor specific definitions of the TI OMAP34XX.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_OMAP34XX_H
+#define __ASM_ARCH_OMAP34XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+
+#define L4_34XX_BASE 0x48000000
+#define L4_WK_34XX_BASE 0x48300000
+#define L4_WK_OMAP_BASE L4_WK_34XX_BASE
+#define L4_PER_34XX_BASE 0x49000000
+#define L4_PER_OMAP_BASE L4_PER_34XX_BASE
+#define L4_EMU_34XX_BASE 0x54000000
+#define L4_EMU_BASE L4_EMU_34XX_BASE
+#define L3_34XX_BASE 0x68000000
+#define L3_OMAP_BASE L3_34XX_BASE
+
+#define OMAP3430_32KSYNCT_BASE 0x48320000
+#define OMAP3430_CM_BASE 0x48004800
+#define OMAP3430_PRM_BASE 0x48306800
+#define OMAP343X_SMS_BASE 0x6C000000
+#define OMAP343X_SDRC_BASE 0x6D000000
+#define OMAP34XX_GPMC_BASE 0x6E000000
+#define OMAP343X_SCM_BASE 0x48002000
+#define OMAP343X_CTRL_BASE OMAP343X_SCM_BASE
+
+#define OMAP34XX_IC_BASE 0x48200000
+#define OMAP34XX_IVA_INTC_BASE 0x40000000
+#define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000)
+#define OMAP34XX_HSUSB_HOST_BASE (L4_34XX_BASE + 0x64000)
+#define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000)
+
+
+#if defined(CONFIG_ARCH_OMAP3430)
+
+#define OMAP2_32KSYNCT_BASE OMAP3430_32KSYNCT_BASE
+#define OMAP2_CM_BASE OMAP3430_CM_BASE
+#define OMAP2_PRM_BASE OMAP3430_PRM_BASE
+#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE)
+
+#endif
+
+#define OMAP34XX_DSP_BASE 0x58000000
+#define OMAP34XX_DSP_MEM_BASE (OMAP34XX_DSP_BASE + 0x0)
+#define OMAP34XX_DSP_IPI_BASE (OMAP34XX_DSP_BASE + 0x1000000)
+#define OMAP34XX_DSP_MMU_BASE (OMAP34XX_DSP_BASE + 0x2000000)
+#endif /* __ASM_ARCH_OMAP34XX_H */
+
diff --git a/include/asm-arm/arch-omap/sram.h b/include/asm-arm/arch-omap/sram.h
index bb9bb3fd532f..be59f4a9828b 100644
--- a/include/asm-arm/arch-omap/sram.h
+++ b/include/asm-arm/arch-omap/sram.h
@@ -11,6 +11,7 @@
#ifndef __ARCH_ARM_OMAP_SRAM_H
#define __ARCH_ARM_OMAP_SRAM_H
+extern int __init omap_sram_init(void);
extern void * omap_sram_push(void * start, unsigned long size);
extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
@@ -21,17 +22,35 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
/* Do not use these */
-extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long sram_reprogram_clock_sz;
+extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap1_sram_reprogram_clock_sz;
-extern void sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-extern unsigned long sram_ddr_init_sz;
+extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap24xx_sram_reprogram_clock_sz;
-extern u32 sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-extern unsigned long sram_set_prcm_sz;
+extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern unsigned long omap242x_sram_ddr_init_sz;
-extern void sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type);
-extern unsigned long sram_reprogram_sdrc_sz;
+extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+ int bypass);
+extern unsigned long omap242x_sram_set_prcm_sz;
+
+extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern unsigned long omap242x_sram_reprogram_sdrc_sz;
+
+
+extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern unsigned long omap243x_sram_ddr_init_sz;
+
+extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+ int bypass);
+extern unsigned long omap243x_sram_set_prcm_sz;
+
+extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern unsigned long omap243x_sram_reprogram_sdrc_sz;
#endif
diff --git a/include/asm-arm/arch-omap/tc.h b/include/asm-arm/arch-omap/tc.h
index 8ded218cbea5..65a9c82d3bf7 100644
--- a/include/asm-arm/arch-omap/tc.h
+++ b/include/asm-arm/arch-omap/tc.h
@@ -75,16 +75,14 @@
#ifndef __ASSEMBLER__
/* EMIF Slow Interface Configuration Register */
-#define OMAP_EMIFS_CONFIG_REG __REG32(EMIFS_CONFIG)
-
#define OMAP_EMIFS_CONFIG_FR (1 << 4)
#define OMAP_EMIFS_CONFIG_PDE (1 << 3)
#define OMAP_EMIFS_CONFIG_PWD_EN (1 << 2)
#define OMAP_EMIFS_CONFIG_BM (1 << 1)
#define OMAP_EMIFS_CONFIG_WP (1 << 0)
-#define EMIFS_CCS(n) __REG32(EMIFS_CS0_CONFIG + (4 * (n)))
-#define EMIFS_ACS(n) __REG32(EMIFS_ACS0 + (4 * (n)))
+#define EMIFS_CCS(n) (EMIFS_CS0_CONFIG + (4 * (n)))
+#define EMIFS_ACS(n) (EMIFS_ACS0 + (4 * (n)))
/* Almost all documentation for chip and board memory maps assumes
* BM is clear. Most devel boards have a switch to control booting
@@ -93,13 +91,13 @@
*/
static inline u32 omap_cs0_phys(void)
{
- return (OMAP_EMIFS_CONFIG_REG & OMAP_EMIFS_CONFIG_BM)
+ return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
? OMAP_CS3_PHYS : 0;
}
static inline u32 omap_cs3_phys(void)
{
- return (OMAP_EMIFS_CONFIG_REG & OMAP_EMIFS_CONFIG_BM)
+ return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
? 0 : OMAP_CS3_PHYS;
}
diff --git a/include/asm-arm/arch-omap/usb.h b/include/asm-arm/arch-omap/usb.h
index 2147d18aaeae..ddf1861e6df9 100644
--- a/include/asm-arm/arch-omap/usb.h
+++ b/include/asm-arm/arch-omap/usb.h
@@ -34,11 +34,8 @@
/*
* OTG and transceiver registers, for OMAPs starting with ARM926
*/
-#define OTG_REG32(offset) __REG32(OTG_BASE + (offset))
-#define OTG_REG16(offset) __REG16(OTG_BASE + (offset))
-
-#define OTG_REV_REG OTG_REG32(0x00)
-#define OTG_SYSCON_1_REG OTG_REG32(0x04)
+#define OTG_REV (OTG_BASE + 0x00)
+#define OTG_SYSCON_1 (OTG_BASE + 0x04)
# define USB2_TRX_MODE(w) (((w)>>24)&0x07)
# define USB1_TRX_MODE(w) (((w)>>20)&0x07)
# define USB0_TRX_MODE(w) (((w)>>16)&0x07)
@@ -47,7 +44,7 @@
# define DEV_IDLE_EN (1 << 13)
# define OTG_RESET_DONE (1 << 2)
# define OTG_SOFT_RESET (1 << 1)
-#define OTG_SYSCON_2_REG OTG_REG32(0x08)
+#define OTG_SYSCON_2 (OTG_BASE + 0x08)
# define OTG_EN (1 << 31)
# define USBX_SYNCHRO (1 << 30)
# define OTG_MST16 (1 << 29)
@@ -65,7 +62,7 @@
# define HMC_TLLSPEED (1 << 7)
# define HMC_TLLATTACH (1 << 6)
# define OTG_HMC(w) (((w)>>0)&0x3f)
-#define OTG_CTRL_REG OTG_REG32(0x0c)
+#define OTG_CTRL (OTG_BASE + 0x0c)
# define OTG_USB2_EN (1 << 29)
# define OTG_USB2_DP (1 << 28)
# define OTG_USB2_DM (1 << 27)
@@ -92,7 +89,7 @@
# define OTG_PD_VBUS (1 << 2)
# define OTG_PU_VBUS (1 << 1)
# define OTG_PU_ID (1 << 0)
-#define OTG_IRQ_EN_REG OTG_REG16(0x10)
+#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */
# define DRIVER_SWITCH (1 << 15)
# define A_VBUS_ERR (1 << 13)
# define A_REQ_TMROUT (1 << 12)
@@ -102,9 +99,9 @@
# define B_SRP_DONE (1 << 8)
# define B_SRP_STARTED (1 << 7)
# define OPRT_CHG (1 << 0)
-#define OTG_IRQ_SRC_REG OTG_REG16(0x14)
+#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */
// same bits as in IRQ_EN
-#define OTG_OUTCTRL_REG OTG_REG16(0x18)
+#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */
# define OTGVPD (1 << 14)
# define OTGVPU (1 << 13)
# define OTGPUID (1 << 12)
@@ -117,13 +114,13 @@
# define USB0VDR (1 << 2)
# define USB0PDEN (1 << 1)
# define USB0PUEN (1 << 0)
-#define OTG_TEST_REG OTG_REG16(0x20)
-#define OTG_VENDOR_CODE_REG OTG_REG32(0xfc)
+#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */
+#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */
/*-------------------------------------------------------------------------*/
/* OMAP1 */
-#define USB_TRANSCEIVER_CTRL_REG __REG32(0xfffe1000 + 0x0064)
+#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064)
# define CONF_USB2_UNI_R (1 << 8)
# define CONF_USB1_UNI_R (1 << 7)
# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7)
diff --git a/include/asm-arm/arch-orion5x/io.h b/include/asm-arm/arch-orion5x/io.h
index 50f8c8802206..59f1bc96a23b 100644
--- a/include/asm-arm/arch-orion5x/io.h
+++ b/include/asm-arm/arch-orion5x/io.h
@@ -14,7 +14,6 @@
#include "orion5x.h"
#define IO_SPACE_LIMIT 0xffffffff
-#define IO_SPACE_REMAP ORION5X_PCI_SYS_IO_BASE
static inline void __iomem *
__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
@@ -53,15 +52,12 @@ static inline void __iomem *__io(unsigned long addr)
/*****************************************************************************
* Helpers to access Orion registers
****************************************************************************/
-#define orion5x_read(r) __raw_readl(r)
-#define orion5x_write(r, val) __raw_writel(val, r)
-
/*
* These are not preempt-safe. Locks, if needed, must be taken
* care of by the caller.
*/
-#define orion5x_setbits(r, mask) orion5x_write((r), orion5x_read(r) | (mask))
-#define orion5x_clrbits(r, mask) orion5x_write((r), orion5x_read(r) & ~(mask))
+#define orion5x_setbits(r, mask) writel(readl(r) | (mask), (r))
+#define orion5x_clrbits(r, mask) writel(readl(r) & ~(mask), (r))
#endif
diff --git a/include/asm-arm/arch-orion5x/orion5x.h b/include/asm-arm/arch-orion5x/orion5x.h
index 206ddd71e193..10257f5c5e9e 100644
--- a/include/asm-arm/arch-orion5x/orion5x.h
+++ b/include/asm-arm/arch-orion5x/orion5x.h
@@ -2,7 +2,7 @@
* include/asm-arm/arch-orion5x/orion5x.h
*
* Generic definitions of Orion SoC flavors:
- * Orion-1, Orion-NAS, Orion-VoIP, and Orion-2.
+ * Orion-1, Orion-VoIP, Orion-NAS, and Orion-2.
*
* Maintainer: Tzachi Perelstein <tzachi@marvell.com>
*
@@ -63,9 +63,11 @@
/*******************************************************************************
* Supported Devices & Revisions
******************************************************************************/
-/* Orion-1 (88F5181) */
+/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
#define MV88F5181_DEV_ID 0x5181
#define MV88F5181_REV_B1 3
+#define MV88F5181L_REV_A0 8
+#define MV88F5181L_REV_A1 9
/* Orion-NAS (88F5182) */
#define MV88F5182_DEV_ID 0x5182
#define MV88F5182_REV_A2 2
@@ -152,6 +154,7 @@
#define BRIDGE_MASK ORION5X_BRIDGE_REG(0x114)
#define BRIDGE_INT_TIMER0 0x0002
#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
#define MAIN_IRQ_CAUSE ORION5X_BRIDGE_REG(0x200)
#define MAIN_IRQ_MASK ORION5X_BRIDGE_REG(0x204)
diff --git a/include/asm-arm/arch-orion5x/uncompress.h b/include/asm-arm/arch-orion5x/uncompress.h
index 5c13d4fafb4e..7548cedf2d76 100644
--- a/include/asm-arm/arch-orion5x/uncompress.h
+++ b/include/asm-arm/arch-orion5x/uncompress.h
@@ -8,23 +8,38 @@
* warranty of any kind, whether express or implied.
*/
+#include <linux/serial_reg.h>
#include <asm/arch/orion5x.h>
-#define MV_UART_THR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x0))
-#define MV_UART_LSR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x14))
-
-#define LSR_THRE 0x20
+#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
static void putc(const char c)
{
- int j = 0x1000;
- while (--j && !(*MV_UART_LSR & LSR_THRE))
+ unsigned char *base = SERIAL_BASE;
+ int i;
+
+ for (i = 0; i < 0x1000; i++) {
+ if (base[UART_LSR << 2] & UART_LSR_THRE)
+ break;
barrier();
- *MV_UART_THR = c;
+ }
+
+ base[UART_TX << 2] = c;
}
static void flush(void)
{
+ unsigned char *base = SERIAL_BASE;
+ unsigned char mask;
+ int i;
+
+ mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+ for (i = 0; i < 0x1000; i++) {
+ if ((base[UART_LSR << 2] & mask) == mask)
+ break;
+ barrier();
+ }
}
/*
diff --git a/include/asm-arm/arch-pxa/audio.h b/include/asm-arm/arch-pxa/audio.h
index 52bbe3bc25e1..f82f96dd1053 100644
--- a/include/asm-arm/arch-pxa/audio.h
+++ b/include/asm-arm/arch-pxa/audio.h
@@ -12,4 +12,6 @@ typedef struct {
void *priv;
} pxa2xx_audio_ops_t;
+extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
+
#endif
diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h
index e25558faa5a4..d9af6dabc899 100644
--- a/include/asm-arm/arch-pxa/hardware.h
+++ b/include/asm-arm/arch-pxa/hardware.h
@@ -192,15 +192,6 @@ extern int pxa_gpio_get_value(unsigned gpio);
extern void pxa_gpio_set_value(unsigned gpio, int value);
/*
- * Routine to enable or disable CKEN
- */
-static inline void __deprecated pxa_set_cken(int clock, int enable)
-{
- extern void __pxa_set_cken(int clock, int enable);
- __pxa_set_cken(clock, enable);
-}
-
-/*
* return current memory and LCD clock frequency in units of 10kHz
*/
extern unsigned int get_memclk_frequency_10khz(void);
diff --git a/include/asm-arm/arch-pxa/irda.h b/include/asm-arm/arch-pxa/irda.h
index 99f4f423a8e1..0a50c3c763df 100644
--- a/include/asm-arm/arch-pxa/irda.h
+++ b/include/asm-arm/arch-pxa/irda.h
@@ -16,4 +16,8 @@ struct pxaficp_platform_data {
extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+void pxa2xx_transceiver_mode(struct device *dev, int mode);
+#endif
+
#endif
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 4b2ea1e95c57..dce9308626b7 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -600,418 +600,6 @@
/*
- * USB Device Controller
- * PXA25x and PXA27x USB device controller registers are different.
- */
-#if defined(CONFIG_PXA25x)
-
-#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */
-#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */
-#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */
-
-#define UDCCR __REG(0x40600000) /* UDC Control Register */
-#define UDCCR_UDE (1 << 0) /* UDC enable */
-#define UDCCR_UDA (1 << 1) /* UDC active */
-#define UDCCR_RSM (1 << 2) /* Device resume */
-#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */
-#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */
-#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */
-#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */
-#define UDCCR_REM (1 << 7) /* Reset interrupt mask */
-
-#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */
-#define UDCCS0_OPR (1 << 0) /* OUT packet ready */
-#define UDCCS0_IPR (1 << 1) /* IN packet ready */
-#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */
-#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */
-#define UDCCS0_SST (1 << 4) /* Sent stall */
-#define UDCCS0_FST (1 << 5) /* Force stall */
-#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */
-#define UDCCS0_SA (1 << 7) /* Setup active */
-
-/* Bulk IN - Endpoint 1,6,11 */
-#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */
-#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */
-#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */
-
-#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */
-#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */
-#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */
-#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */
-#define UDCCS_BI_SST (1 << 4) /* Sent stall */
-#define UDCCS_BI_FST (1 << 5) /* Force stall */
-#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */
-
-/* Bulk OUT - Endpoint 2,7,12 */
-#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */
-#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */
-#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */
-
-#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */
-#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */
-#define UDCCS_BO_DME (1 << 3) /* DMA enable */
-#define UDCCS_BO_SST (1 << 4) /* Sent stall */
-#define UDCCS_BO_FST (1 << 5) /* Force stall */
-#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */
-#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */
-
-/* Isochronous IN - Endpoint 3,8,13 */
-#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */
-#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */
-#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */
-
-#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */
-#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */
-#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */
-#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */
-#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */
-
-/* Isochronous OUT - Endpoint 4,9,14 */
-#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */
-#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */
-#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */
-
-#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */
-#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */
-#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */
-#define UDCCS_IO_DME (1 << 3) /* DMA enable */
-#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */
-#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */
-
-/* Interrupt IN - Endpoint 5,10,15 */
-#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */
-#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */
-#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */
-
-#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */
-#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */
-#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */
-#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */
-#define UDCCS_INT_SST (1 << 4) /* Sent stall */
-#define UDCCS_INT_FST (1 << 5) /* Force stall */
-#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */
-
-#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */
-#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */
-#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */
-#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */
-#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */
-#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */
-#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */
-#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */
-#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */
-#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */
-#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */
-#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */
-#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */
-#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */
-#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */
-#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */
-#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */
-#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */
-#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */
-#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */
-#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */
-#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */
-#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */
-#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */
-
-#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */
-
-#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */
-#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */
-#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */
-#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */
-#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */
-#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */
-#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */
-#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */
-
-#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */
-
-#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */
-#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */
-#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */
-#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */
-#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */
-#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */
-#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */
-#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */
-
-#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */
-
-#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */
-#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */
-#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */
-#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */
-#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */
-#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */
-#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */
-#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */
-
-#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */
-
-#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */
-#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */
-#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */
-#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */
-#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */
-#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */
-#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */
-#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */
-
-#elif defined(CONFIG_PXA27x)
-
-#define UDCCR __REG(0x40600000) /* UDC Control Register */
-#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */
-#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation
- Protocol Port Support */
-#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol
- Support */
-#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol
- Enable */
-#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */
-#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */
-#define UDCCR_ACN_S 11
-#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */
-#define UDCCR_AIN_S 8
-#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface
- Setting Number */
-#define UDCCR_AAISN_S 5
-#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active
- Configuration */
-#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration
- Error */
-#define UDCCR_UDR (1 << 2) /* UDC Resume */
-#define UDCCR_UDA (1 << 1) /* UDC Active */
-#define UDCCR_UDE (1 << 0) /* UDC Enable */
-
-#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */
-#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */
-#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */
-#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */
-
-#define UDC_INT_FIFOERROR (0x2)
-#define UDC_INT_PACKETCMP (0x1)
-
-#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
-#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */
-#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */
-#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */
-#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */
-#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */
-
-#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
-#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */
-#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
-#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */
-#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */
-#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */
-#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */
-#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */
-
-#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */
-#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */
-#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */
-#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt
- Rising Edge Interrupt Enable */
-#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt
- Falling Edge Interrupt Enable */
-#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge
- Interrupt Enable */
-#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge
- Interrupt Enable */
-#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge
- Interrupt Enable */
-#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge
- Interrupt Enable */
-#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge
- Interrupt Enable */
-#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge
- Interrupt Enable */
-#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising
- Edge Interrupt Enable */
-#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling
- Edge Interrupt Enable */
-#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge
- Interrupt Enable */
-#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge
- Interrupt Enable */
-
-#define UP2OCR __REG(0x40600020) /* USB Port 2 Output Control register */
-
-#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */
-#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */
-#define UP2OCR_DPPDE (1 << 2) /* Host Port 2 Transceiver D+ Pull Down Enable */
-#define UP2OCR_DMPDE (1 << 3) /* Host Port 2 Transceiver D- Pull Down Enable */
-#define UP2OCR_DPPUE (1 << 4) /* Host Port 2 Transceiver D+ Pull Up Enable */
-#define UP2OCR_DMPUE (1 << 5) /* Host Port 2 Transceiver D- Pull Up Enable */
-#define UP2OCR_DPPUBE (1 << 6) /* Host Port 2 Transceiver D+ Pull Up Bypass Enable */
-#define UP2OCR_DMPUBE (1 << 7) /* Host Port 2 Transceiver D- Pull Up Bypass Enable */
-#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */
-#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */
-#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */
-#define UP2OCR_HXS (1 << 16) /* Host Port 2 Transceiver Output Select */
-#define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */
-#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */
-
-#define UDCCSN(x) __REG2(0x40600100, (x) << 2)
-#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
-#define UDCCSR0_SA (1 << 7) /* Setup Active */
-#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */
-#define UDCCSR0_FST (1 << 5) /* Force Stall */
-#define UDCCSR0_SST (1 << 4) /* Sent Stall */
-#define UDCCSR0_DME (1 << 3) /* DMA Enable */
-#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */
-#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */
-#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */
-
-#define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
-#define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
-#define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
-#define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
-#define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
-#define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
-#define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
-#define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
-#define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
-#define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
-#define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
-#define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
-#define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
-#define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
-#define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
-#define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
-#define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
-#define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
-#define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
-#define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
-#define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
-#define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
-#define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */
-
-#define UDCCSR_DPE (1 << 9) /* Data Packet Error */
-#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */
-#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */
-#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */
-#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */
-#define UDCCSR_FST (1 << 5) /* Force STALL */
-#define UDCCSR_SST (1 << 4) /* Sent STALL */
-#define UDCCSR_DME (1 << 3) /* DMA Enable */
-#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */
-#define UDCCSR_PC (1 << 1) /* Packet Complete */
-#define UDCCSR_FS (1 << 0) /* FIFO needs service */
-
-#define UDCBCN(x) __REG2(0x40600200, (x)<<2)
-#define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */
-#define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */
-#define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */
-#define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */
-#define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */
-#define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */
-#define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */
-#define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */
-#define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */
-#define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */
-#define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */
-#define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */
-#define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */
-#define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */
-#define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */
-#define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */
-#define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */
-#define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */
-#define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */
-#define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */
-#define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */
-#define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */
-#define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */
-#define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */
-
-#define UDCDN(x) __REG2(0x40600300, (x)<<2)
-#define PHYS_UDCDN(x) (0x40600300 + ((x)<<2))
-#define PUDCDN(x) (volatile u32 *)(io_p2v(PHYS_UDCDN((x))))
-#define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */
-#define UDCDRA __REG(0x40600304) /* Data Register - EPA */
-#define UDCDRB __REG(0x40600308) /* Data Register - EPB */
-#define UDCDRC __REG(0x4060030C) /* Data Register - EPC */
-#define UDCDRD __REG(0x40600310) /* Data Register - EPD */
-#define UDCDRE __REG(0x40600314) /* Data Register - EPE */
-#define UDCDRF __REG(0x40600318) /* Data Register - EPF */
-#define UDCDRG __REG(0x4060031C) /* Data Register - EPG */
-#define UDCDRH __REG(0x40600320) /* Data Register - EPH */
-#define UDCDRI __REG(0x40600324) /* Data Register - EPI */
-#define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */
-#define UDCDRK __REG(0x4060032C) /* Data Register - EPK */
-#define UDCDRL __REG(0x40600330) /* Data Register - EPL */
-#define UDCDRM __REG(0x40600334) /* Data Register - EPM */
-#define UDCDRN __REG(0x40600338) /* Data Register - EPN */
-#define UDCDRP __REG(0x4060033C) /* Data Register - EPP */
-#define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */
-#define UDCDRR __REG(0x40600344) /* Data Register - EPR */
-#define UDCDRS __REG(0x40600348) /* Data Register - EPS */
-#define UDCDRT __REG(0x4060034C) /* Data Register - EPT */
-#define UDCDRU __REG(0x40600350) /* Data Register - EPU */
-#define UDCDRV __REG(0x40600354) /* Data Register - EPV */
-#define UDCDRW __REG(0x40600358) /* Data Register - EPW */
-#define UDCDRX __REG(0x4060035C) /* Data Register - EPX */
-
-#define UDCCN(x) __REG2(0x40600400, (x)<<2)
-#define UDCCRA __REG(0x40600404) /* Configuration register EPA */
-#define UDCCRB __REG(0x40600408) /* Configuration register EPB */
-#define UDCCRC __REG(0x4060040C) /* Configuration register EPC */
-#define UDCCRD __REG(0x40600410) /* Configuration register EPD */
-#define UDCCRE __REG(0x40600414) /* Configuration register EPE */
-#define UDCCRF __REG(0x40600418) /* Configuration register EPF */
-#define UDCCRG __REG(0x4060041C) /* Configuration register EPG */
-#define UDCCRH __REG(0x40600420) /* Configuration register EPH */
-#define UDCCRI __REG(0x40600424) /* Configuration register EPI */
-#define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */
-#define UDCCRK __REG(0x4060042C) /* Configuration register EPK */
-#define UDCCRL __REG(0x40600430) /* Configuration register EPL */
-#define UDCCRM __REG(0x40600434) /* Configuration register EPM */
-#define UDCCRN __REG(0x40600438) /* Configuration register EPN */
-#define UDCCRP __REG(0x4060043C) /* Configuration register EPP */
-#define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */
-#define UDCCRR __REG(0x40600444) /* Configuration register EPR */
-#define UDCCRS __REG(0x40600448) /* Configuration register EPS */
-#define UDCCRT __REG(0x4060044C) /* Configuration register EPT */
-#define UDCCRU __REG(0x40600450) /* Configuration register EPU */
-#define UDCCRV __REG(0x40600454) /* Configuration register EPV */
-#define UDCCRW __REG(0x40600458) /* Configuration register EPW */
-#define UDCCRX __REG(0x4060045C) /* Configuration register EPX */
-
-#define UDCCONR_CN (0x03 << 25) /* Configuration Number */
-#define UDCCONR_CN_S (25)
-#define UDCCONR_IN (0x07 << 22) /* Interface Number */
-#define UDCCONR_IN_S (22)
-#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */
-#define UDCCONR_AISN_S (19)
-#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */
-#define UDCCONR_EN_S (15)
-#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */
-#define UDCCONR_ET_S (13)
-#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */
-#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */
-#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */
-#define UDCCONR_ET_NU (0x00 << 13) /* Not used */
-#define UDCCONR_ED (1 << 12) /* Endpoint Direction */
-#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */
-#define UDCCONR_MPS_S (2)
-#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */
-#define UDCCONR_EE (1 << 0) /* Endpoint Enable */
-
-
-#define UDC_INT_FIFOERROR (0x2)
-#define UDC_INT_PACKETCMP (0x1)
-
-#define UDC_FNR_MASK (0x7ff)
-
-#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST)
-#define UDC_BCR_MASK (0x3ff)
-#endif
-
-/*
* Fast Infrared Communication Port
*/
@@ -1237,120 +825,9 @@
#endif
/*
- * Power Manager
+ * Power Manager - see pxa2xx-regs.h
*/
-#define PMCR __REG(0x40F00000) /* Power Manager Control Register */
-#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */
-#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */
-#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */
-#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */
-#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */
-#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */
-#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */
-#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */
-#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */
-#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */
-#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */
-#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */
-
-#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */
-#define PSTR __REG(0x40F00038) /*Power Manager Standby Config Register */
-#define PSNR __REG(0x40F0003C) /*Power Manager Sense Config Register */
-#define PVCR __REG(0x40F00040) /*Power Manager VoltageControl Register */
-#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */
-#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */
-#define PCMD(x) __REG2(0x40F00080, (x)<<2)
-#define PCMD0 __REG(0x40F00080 + 0 * 4)
-#define PCMD1 __REG(0x40F00080 + 1 * 4)
-#define PCMD2 __REG(0x40F00080 + 2 * 4)
-#define PCMD3 __REG(0x40F00080 + 3 * 4)
-#define PCMD4 __REG(0x40F00080 + 4 * 4)
-#define PCMD5 __REG(0x40F00080 + 5 * 4)
-#define PCMD6 __REG(0x40F00080 + 6 * 4)
-#define PCMD7 __REG(0x40F00080 + 7 * 4)
-#define PCMD8 __REG(0x40F00080 + 8 * 4)
-#define PCMD9 __REG(0x40F00080 + 9 * 4)
-#define PCMD10 __REG(0x40F00080 + 10 * 4)
-#define PCMD11 __REG(0x40F00080 + 11 * 4)
-#define PCMD12 __REG(0x40F00080 + 12 * 4)
-#define PCMD13 __REG(0x40F00080 + 13 * 4)
-#define PCMD14 __REG(0x40F00080 + 14 * 4)
-#define PCMD15 __REG(0x40F00080 + 15 * 4)
-#define PCMD16 __REG(0x40F00080 + 16 * 4)
-#define PCMD17 __REG(0x40F00080 + 17 * 4)
-#define PCMD18 __REG(0x40F00080 + 18 * 4)
-#define PCMD19 __REG(0x40F00080 + 19 * 4)
-#define PCMD20 __REG(0x40F00080 + 20 * 4)
-#define PCMD21 __REG(0x40F00080 + 21 * 4)
-#define PCMD22 __REG(0x40F00080 + 22 * 4)
-#define PCMD23 __REG(0x40F00080 + 23 * 4)
-#define PCMD24 __REG(0x40F00080 + 24 * 4)
-#define PCMD25 __REG(0x40F00080 + 25 * 4)
-#define PCMD26 __REG(0x40F00080 + 26 * 4)
-#define PCMD27 __REG(0x40F00080 + 27 * 4)
-#define PCMD28 __REG(0x40F00080 + 28 * 4)
-#define PCMD29 __REG(0x40F00080 + 29 * 4)
-#define PCMD30 __REG(0x40F00080 + 30 * 4)
-#define PCMD31 __REG(0x40F00080 + 31 * 4)
-
-#define PCMD_MBC (1<<12)
-#define PCMD_DCE (1<<11)
-#define PCMD_LC (1<<10)
-/* FIXME: PCMD_SQC need be checked. */
-#define PCMD_SQC (3<<8) /* currently only bit 8 is changeable,
- bit 9 should be 0 all day. */
-#define PVCR_VCSA (0x1<<14)
-#define PVCR_CommandDelay (0xf80)
-#define PCFR_PI2C_EN (0x1 << 6)
-
-#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */
-#define PSSR_RDH (1 << 5) /* Read Disable Hold */
-#define PSSR_PH (1 << 4) /* Peripheral Control Hold */
-#define PSSR_STS (1 << 3) /* Standby Mode Status */
-#define PSSR_VFS (1 << 2) /* VDD Fault Status */
-#define PSSR_BFS (1 << 1) /* Battery Fault Status */
-#define PSSR_SSS (1 << 0) /* Software Sleep Status */
-
-#define PSLR_SL_ROD (1 << 20) /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
-
-#define PCFR_RO (1 << 15) /* RDH Override */
-#define PCFR_PO (1 << 14) /* PH Override */
-#define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */
-#define PCFR_L1_EN (1 << 11) /* Sleep Mode L1 converter Enable */
-#define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */
-#define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */
-#define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */
-#define PCFR_GPR_EN (1 << 4) /* nRESET_GPIO Pin Enable */
-#define PCFR_DS (1 << 3) /* Deep Sleep Mode */
-#define PCFR_FS (1 << 2) /* Float Static Chip Selects */
-#define PCFR_FP (1 << 1) /* Float PCMCIA controls */
-#define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */
-
-#define RCSR_GPR (1 << 3) /* GPIO Reset */
-#define RCSR_SMR (1 << 2) /* Sleep Mode */
-#define RCSR_WDR (1 << 1) /* Watchdog Reset */
-#define RCSR_HWR (1 << 0) /* Hardware Reset */
-
-#define PWER_GPIO(Nb) (1 << Nb) /* GPIO [0..15] wake-up enable */
-#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */
-#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */
-#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */
-#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */
-#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */
-#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */
-#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */
-#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */
-#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */
-#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */
-#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */
-#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */
-#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */
-#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */
-#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */
-#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */
-#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */
-
/*
* SSP Serial Port Registers - see include/asm-arm/arch-pxa/regs-ssp.h
*/
@@ -1360,52 +837,9 @@
*/
/*
- * Core Clock
+ * Core Clock - see include/asm-arm/arch-pxa/pxa2xx-regs.h
*/
-#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */
-#define CKEN __REG(0x41300004) /* Clock Enable Register */
-#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */
-#define CCSR __REG(0x4130000C) /* Core Clock Status Register */
-
-#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
-#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */
-#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */
-
-#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */
-#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */
-#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */
-#define CKEN_MEMC (22) /* Memory Controller Clock Enable */
-#define CKEN_MEMSTK (21) /* Memory Stick Host Controller */
-#define CKEN_IM (20) /* Internal Memory Clock Enable */
-#define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */
-#define CKEN_USIM (18) /* USIM Unit Clock Enable */
-#define CKEN_MSL (17) /* MSL Unit Clock Enable */
-#define CKEN_LCD (16) /* LCD Unit Clock Enable */
-#define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */
-#define CKEN_I2C (14) /* I2C Unit Clock Enable */
-#define CKEN_FICP (13) /* FICP Unit Clock Enable */
-#define CKEN_MMC (12) /* MMC Unit Clock Enable */
-#define CKEN_USB (11) /* USB Unit Clock Enable */
-#define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */
-#define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */
-#define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */
-#define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */
-#define CKEN_I2S (8) /* I2S Unit Clock Enable */
-#define CKEN_BTUART (7) /* BTUART Unit Clock Enable */
-#define CKEN_FFUART (6) /* FFUART Unit Clock Enable */
-#define CKEN_STUART (5) /* STUART Unit Clock Enable */
-#define CKEN_HWUART (4) /* HWUART Unit Clock Enable */
-#define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */
-#define CKEN_SSP (3) /* SSP Unit Clock Enable */
-#define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */
-#define CKEN_AC97 (2) /* AC97 Unit Clock Enable */
-#define CKEN_PWM1 (1) /* PWM1 Clock Enable */
-#define CKEN_PWM0 (0) /* PWM0 Clock Enable */
-
-#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
-#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
-
#ifdef CONFIG_PXA27x
/* Camera Interface */
diff --git a/include/asm-arm/arch-pxa/pxa25x-udc.h b/include/asm-arm/arch-pxa/pxa25x-udc.h
new file mode 100644
index 000000000000..840305916b6d
--- /dev/null
+++ b/include/asm-arm/arch-pxa/pxa25x-udc.h
@@ -0,0 +1,163 @@
+#ifndef _ASM_ARCH_PXA25X_UDC_H
+#define _ASM_ARCH_PXA25X_UDC_H
+
+#ifdef _ASM_ARCH_PXA27X_UDC_H
+#error You can't include both PXA25x and PXA27x UDC support
+#endif
+
+#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */
+#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */
+#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */
+
+#define UDCCR __REG(0x40600000) /* UDC Control Register */
+#define UDCCR_UDE (1 << 0) /* UDC enable */
+#define UDCCR_UDA (1 << 1) /* UDC active */
+#define UDCCR_RSM (1 << 2) /* Device resume */
+#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */
+#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */
+#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */
+#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */
+#define UDCCR_REM (1 << 7) /* Reset interrupt mask */
+
+#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */
+#define UDCCS0_OPR (1 << 0) /* OUT packet ready */
+#define UDCCS0_IPR (1 << 1) /* IN packet ready */
+#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */
+#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */
+#define UDCCS0_SST (1 << 4) /* Sent stall */
+#define UDCCS0_FST (1 << 5) /* Force stall */
+#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */
+#define UDCCS0_SA (1 << 7) /* Setup active */
+
+/* Bulk IN - Endpoint 1,6,11 */
+#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */
+#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */
+#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */
+
+#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */
+#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */
+#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */
+#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */
+#define UDCCS_BI_SST (1 << 4) /* Sent stall */
+#define UDCCS_BI_FST (1 << 5) /* Force stall */
+#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */
+
+/* Bulk OUT - Endpoint 2,7,12 */
+#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */
+#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */
+
+#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */
+#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */
+#define UDCCS_BO_DME (1 << 3) /* DMA enable */
+#define UDCCS_BO_SST (1 << 4) /* Sent stall */
+#define UDCCS_BO_FST (1 << 5) /* Force stall */
+#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */
+#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */
+
+/* Isochronous IN - Endpoint 3,8,13 */
+#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */
+#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */
+
+#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */
+#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */
+#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */
+#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */
+#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */
+
+/* Isochronous OUT - Endpoint 4,9,14 */
+#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */
+#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */
+
+#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */
+#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */
+#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */
+#define UDCCS_IO_DME (1 << 3) /* DMA enable */
+#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */
+#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */
+
+/* Interrupt IN - Endpoint 5,10,15 */
+#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */
+#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */
+
+#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */
+#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */
+#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */
+#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */
+#define UDCCS_INT_SST (1 << 4) /* Sent stall */
+#define UDCCS_INT_FST (1 << 5) /* Force stall */
+#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */
+
+#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */
+#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */
+#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */
+#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */
+#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */
+#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */
+#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */
+#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */
+#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */
+#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */
+#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */
+#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */
+#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */
+#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */
+#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */
+#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */
+#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */
+#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */
+#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */
+#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */
+#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */
+#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */
+#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */
+#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */
+
+#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */
+
+#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */
+#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */
+#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */
+#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */
+#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */
+#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */
+#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */
+#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */
+
+#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */
+
+#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */
+#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */
+#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */
+#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */
+#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */
+#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */
+#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */
+#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */
+
+#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */
+
+#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */
+#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */
+#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */
+#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */
+#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */
+#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */
+#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */
+#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */
+
+#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */
+
+#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */
+#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */
+#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */
+#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */
+#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */
+#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */
+#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */
+#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */
+
+#endif
diff --git a/include/asm-arm/arch-pxa/pxa27x-udc.h b/include/asm-arm/arch-pxa/pxa27x-udc.h
new file mode 100644
index 000000000000..bc1cf7d0773a
--- /dev/null
+++ b/include/asm-arm/arch-pxa/pxa27x-udc.h
@@ -0,0 +1,257 @@
+#ifndef _ASM_ARCH_PXA27X_UDC_H
+#define _ASM_ARCH_PXA27X_UDC_H
+
+#ifdef _ASM_ARCH_PXA25X_UDC_H
+#error You cannot include both PXA25x and PXA27x UDC support
+#endif
+
+#define UDCCR __REG(0x40600000) /* UDC Control Register */
+#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */
+#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation
+ Protocol Port Support */
+#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol
+ Support */
+#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol
+ Enable */
+#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */
+#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */
+#define UDCCR_ACN_S 11
+#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */
+#define UDCCR_AIN_S 8
+#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface
+ Setting Number */
+#define UDCCR_AAISN_S 5
+#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active
+ Configuration */
+#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration
+ Error */
+#define UDCCR_UDR (1 << 2) /* UDC Resume */
+#define UDCCR_UDA (1 << 1) /* UDC Active */
+#define UDCCR_UDE (1 << 0) /* UDC Enable */
+
+#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */
+#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */
+#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */
+#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */
+
+#define UDC_INT_FIFOERROR (0x2)
+#define UDC_INT_PACKETCMP (0x1)
+
+#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */
+#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */
+#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */
+#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */
+#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */
+
+#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
+#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */
+#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */
+#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */
+#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */
+#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */
+#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */
+
+#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */
+#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */
+#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */
+#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt
+ Rising Edge Interrupt Enable */
+#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt
+ Falling Edge Interrupt Enable */
+#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge
+ Interrupt Enable */
+#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge
+ Interrupt Enable */
+#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising
+ Edge Interrupt Enable */
+#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling
+ Edge Interrupt Enable */
+#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge
+ Interrupt Enable */
+
+#define UP2OCR __REG(0x40600020) /* USB Port 2 Output Control register */
+#define UP3OCR __REG(0x40600024) /* USB Port 2 Output Control register */
+
+#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */
+#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */
+#define UP2OCR_DPPDE (1 << 2) /* Host Port 2 Transceiver D+ Pull Down Enable */
+#define UP2OCR_DMPDE (1 << 3) /* Host Port 2 Transceiver D- Pull Down Enable */
+#define UP2OCR_DPPUE (1 << 4) /* Host Port 2 Transceiver D+ Pull Up Enable */
+#define UP2OCR_DMPUE (1 << 5) /* Host Port 2 Transceiver D- Pull Up Enable */
+#define UP2OCR_DPPUBE (1 << 6) /* Host Port 2 Transceiver D+ Pull Up Bypass Enable */
+#define UP2OCR_DMPUBE (1 << 7) /* Host Port 2 Transceiver D- Pull Up Bypass Enable */
+#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */
+#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */
+#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */
+#define UP2OCR_HXS (1 << 16) /* Host Port 2 Transceiver Output Select */
+#define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */
+#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */
+
+#define UDCCSN(x) __REG2(0x40600100, (x) << 2)
+#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
+#define UDCCSR0_SA (1 << 7) /* Setup Active */
+#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */
+#define UDCCSR0_FST (1 << 5) /* Force Stall */
+#define UDCCSR0_SST (1 << 4) /* Sent Stall */
+#define UDCCSR0_DME (1 << 3) /* DMA Enable */
+#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */
+#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */
+#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */
+
+#define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
+#define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
+#define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
+#define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
+#define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
+#define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
+#define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
+#define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
+#define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
+#define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
+#define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
+#define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
+#define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
+#define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
+#define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
+#define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
+#define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
+#define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
+#define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
+#define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
+#define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
+#define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
+#define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */
+
+#define UDCCSR_DPE (1 << 9) /* Data Packet Error */
+#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */
+#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */
+#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */
+#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */
+#define UDCCSR_FST (1 << 5) /* Force STALL */
+#define UDCCSR_SST (1 << 4) /* Sent STALL */
+#define UDCCSR_DME (1 << 3) /* DMA Enable */
+#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */
+#define UDCCSR_PC (1 << 1) /* Packet Complete */
+#define UDCCSR_FS (1 << 0) /* FIFO needs service */
+
+#define UDCBCN(x) __REG2(0x40600200, (x)<<2)
+#define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */
+#define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */
+#define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */
+#define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */
+#define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */
+#define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */
+#define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */
+#define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */
+#define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */
+#define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */
+#define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */
+#define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */
+#define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */
+#define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */
+#define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */
+#define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */
+#define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */
+#define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */
+#define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */
+#define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */
+#define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */
+#define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */
+#define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */
+#define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */
+
+#define UDCDN(x) __REG2(0x40600300, (x)<<2)
+#define PHYS_UDCDN(x) (0x40600300 + ((x)<<2))
+#define PUDCDN(x) (volatile u32 *)(io_p2v(PHYS_UDCDN((x))))
+#define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */
+#define UDCDRA __REG(0x40600304) /* Data Register - EPA */
+#define UDCDRB __REG(0x40600308) /* Data Register - EPB */
+#define UDCDRC __REG(0x4060030C) /* Data Register - EPC */
+#define UDCDRD __REG(0x40600310) /* Data Register - EPD */
+#define UDCDRE __REG(0x40600314) /* Data Register - EPE */
+#define UDCDRF __REG(0x40600318) /* Data Register - EPF */
+#define UDCDRG __REG(0x4060031C) /* Data Register - EPG */
+#define UDCDRH __REG(0x40600320) /* Data Register - EPH */
+#define UDCDRI __REG(0x40600324) /* Data Register - EPI */
+#define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */
+#define UDCDRK __REG(0x4060032C) /* Data Register - EPK */
+#define UDCDRL __REG(0x40600330) /* Data Register - EPL */
+#define UDCDRM __REG(0x40600334) /* Data Register - EPM */
+#define UDCDRN __REG(0x40600338) /* Data Register - EPN */
+#define UDCDRP __REG(0x4060033C) /* Data Register - EPP */
+#define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */
+#define UDCDRR __REG(0x40600344) /* Data Register - EPR */
+#define UDCDRS __REG(0x40600348) /* Data Register - EPS */
+#define UDCDRT __REG(0x4060034C) /* Data Register - EPT */
+#define UDCDRU __REG(0x40600350) /* Data Register - EPU */
+#define UDCDRV __REG(0x40600354) /* Data Register - EPV */
+#define UDCDRW __REG(0x40600358) /* Data Register - EPW */
+#define UDCDRX __REG(0x4060035C) /* Data Register - EPX */
+
+#define UDCCN(x) __REG2(0x40600400, (x)<<2)
+#define UDCCRA __REG(0x40600404) /* Configuration register EPA */
+#define UDCCRB __REG(0x40600408) /* Configuration register EPB */
+#define UDCCRC __REG(0x4060040C) /* Configuration register EPC */
+#define UDCCRD __REG(0x40600410) /* Configuration register EPD */
+#define UDCCRE __REG(0x40600414) /* Configuration register EPE */
+#define UDCCRF __REG(0x40600418) /* Configuration register EPF */
+#define UDCCRG __REG(0x4060041C) /* Configuration register EPG */
+#define UDCCRH __REG(0x40600420) /* Configuration register EPH */
+#define UDCCRI __REG(0x40600424) /* Configuration register EPI */
+#define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */
+#define UDCCRK __REG(0x4060042C) /* Configuration register EPK */
+#define UDCCRL __REG(0x40600430) /* Configuration register EPL */
+#define UDCCRM __REG(0x40600434) /* Configuration register EPM */
+#define UDCCRN __REG(0x40600438) /* Configuration register EPN */
+#define UDCCRP __REG(0x4060043C) /* Configuration register EPP */
+#define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */
+#define UDCCRR __REG(0x40600444) /* Configuration register EPR */
+#define UDCCRS __REG(0x40600448) /* Configuration register EPS */
+#define UDCCRT __REG(0x4060044C) /* Configuration register EPT */
+#define UDCCRU __REG(0x40600450) /* Configuration register EPU */
+#define UDCCRV __REG(0x40600454) /* Configuration register EPV */
+#define UDCCRW __REG(0x40600458) /* Configuration register EPW */
+#define UDCCRX __REG(0x4060045C) /* Configuration register EPX */
+
+#define UDCCONR_CN (0x03 << 25) /* Configuration Number */
+#define UDCCONR_CN_S (25)
+#define UDCCONR_IN (0x07 << 22) /* Interface Number */
+#define UDCCONR_IN_S (22)
+#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */
+#define UDCCONR_AISN_S (19)
+#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */
+#define UDCCONR_EN_S (15)
+#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */
+#define UDCCONR_ET_S (13)
+#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */
+#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */
+#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */
+#define UDCCONR_ET_NU (0x00 << 13) /* Not used */
+#define UDCCONR_ED (1 << 12) /* Endpoint Direction */
+#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */
+#define UDCCONR_MPS_S (2)
+#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */
+#define UDCCONR_EE (1 << 0) /* Endpoint Enable */
+
+
+#define UDC_INT_FIFOERROR (0x2)
+#define UDC_INT_PACKETCMP (0x1)
+
+#define UDC_FNR_MASK (0x7ff)
+
+#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST)
+#define UDC_BCR_MASK (0x3ff)
+
+#endif
diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/include/asm-arm/arch-pxa/pxa2xx-gpio.h
index b81cd63cb2eb..6ef1dd09970b 100644
--- a/include/asm-arm/arch-pxa/pxa2xx-gpio.h
+++ b/include/asm-arm/arch-pxa/pxa2xx-gpio.h
@@ -1,6 +1,8 @@
#ifndef __ASM_ARCH_PXA2XX_GPIO_H
#define __ASM_ARCH_PXA2XX_GPIO_H
+#warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h
+
/* GPIO alternate function assignments */
#define GPIO1_RST 1 /* reset */
diff --git a/include/asm-arm/arch-pxa/pxa2xx-regs.h b/include/asm-arm/arch-pxa/pxa2xx-regs.h
index 9553b54fa5bc..73e0a329cf7f 100644
--- a/include/asm-arm/arch-pxa/pxa2xx-regs.h
+++ b/include/asm-arm/arch-pxa/pxa2xx-regs.h
@@ -81,4 +81,166 @@
#endif
+
+/*
+ * Power Manager
+ */
+
+#define PMCR __REG(0x40F00000) /* Power Manager Control Register */
+#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */
+#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */
+#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */
+#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */
+#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */
+#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */
+#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */
+#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */
+#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */
+#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */
+#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */
+#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */
+
+#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */
+#define PSTR __REG(0x40F00038) /* Power Manager Standby Config Register */
+#define PSNR __REG(0x40F0003C) /* Power Manager Sense Config Register */
+#define PVCR __REG(0x40F00040) /* Power Manager VoltageControl Register */
+#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */
+#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */
+#define PCMD(x) __REG2(0x40F00080, (x)<<2)
+#define PCMD0 __REG(0x40F00080 + 0 * 4)
+#define PCMD1 __REG(0x40F00080 + 1 * 4)
+#define PCMD2 __REG(0x40F00080 + 2 * 4)
+#define PCMD3 __REG(0x40F00080 + 3 * 4)
+#define PCMD4 __REG(0x40F00080 + 4 * 4)
+#define PCMD5 __REG(0x40F00080 + 5 * 4)
+#define PCMD6 __REG(0x40F00080 + 6 * 4)
+#define PCMD7 __REG(0x40F00080 + 7 * 4)
+#define PCMD8 __REG(0x40F00080 + 8 * 4)
+#define PCMD9 __REG(0x40F00080 + 9 * 4)
+#define PCMD10 __REG(0x40F00080 + 10 * 4)
+#define PCMD11 __REG(0x40F00080 + 11 * 4)
+#define PCMD12 __REG(0x40F00080 + 12 * 4)
+#define PCMD13 __REG(0x40F00080 + 13 * 4)
+#define PCMD14 __REG(0x40F00080 + 14 * 4)
+#define PCMD15 __REG(0x40F00080 + 15 * 4)
+#define PCMD16 __REG(0x40F00080 + 16 * 4)
+#define PCMD17 __REG(0x40F00080 + 17 * 4)
+#define PCMD18 __REG(0x40F00080 + 18 * 4)
+#define PCMD19 __REG(0x40F00080 + 19 * 4)
+#define PCMD20 __REG(0x40F00080 + 20 * 4)
+#define PCMD21 __REG(0x40F00080 + 21 * 4)
+#define PCMD22 __REG(0x40F00080 + 22 * 4)
+#define PCMD23 __REG(0x40F00080 + 23 * 4)
+#define PCMD24 __REG(0x40F00080 + 24 * 4)
+#define PCMD25 __REG(0x40F00080 + 25 * 4)
+#define PCMD26 __REG(0x40F00080 + 26 * 4)
+#define PCMD27 __REG(0x40F00080 + 27 * 4)
+#define PCMD28 __REG(0x40F00080 + 28 * 4)
+#define PCMD29 __REG(0x40F00080 + 29 * 4)
+#define PCMD30 __REG(0x40F00080 + 30 * 4)
+#define PCMD31 __REG(0x40F00080 + 31 * 4)
+
+#define PCMD_MBC (1<<12)
+#define PCMD_DCE (1<<11)
+#define PCMD_LC (1<<10)
+/* FIXME: PCMD_SQC need be checked. */
+#define PCMD_SQC (3<<8) /* currently only bit 8 is changeable,
+ bit 9 should be 0 all day. */
+#define PVCR_VCSA (0x1<<14)
+#define PVCR_CommandDelay (0xf80)
+#define PCFR_PI2C_EN (0x1 << 6)
+
+#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */
+#define PSSR_RDH (1 << 5) /* Read Disable Hold */
+#define PSSR_PH (1 << 4) /* Peripheral Control Hold */
+#define PSSR_STS (1 << 3) /* Standby Mode Status */
+#define PSSR_VFS (1 << 2) /* VDD Fault Status */
+#define PSSR_BFS (1 << 1) /* Battery Fault Status */
+#define PSSR_SSS (1 << 0) /* Software Sleep Status */
+
+#define PSLR_SL_ROD (1 << 20) /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
+
+#define PCFR_RO (1 << 15) /* RDH Override */
+#define PCFR_PO (1 << 14) /* PH Override */
+#define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */
+#define PCFR_L1_EN (1 << 11) /* Sleep Mode L1 converter Enable */
+#define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */
+#define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */
+#define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */
+#define PCFR_GPR_EN (1 << 4) /* nRESET_GPIO Pin Enable */
+#define PCFR_DS (1 << 3) /* Deep Sleep Mode */
+#define PCFR_FS (1 << 2) /* Float Static Chip Selects */
+#define PCFR_FP (1 << 1) /* Float PCMCIA controls */
+#define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */
+
+#define RCSR_GPR (1 << 3) /* GPIO Reset */
+#define RCSR_SMR (1 << 2) /* Sleep Mode */
+#define RCSR_WDR (1 << 1) /* Watchdog Reset */
+#define RCSR_HWR (1 << 0) /* Hardware Reset */
+
+#define PWER_GPIO(Nb) (1 << Nb) /* GPIO [0..15] wake-up enable */
+#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */
+#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */
+#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */
+#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */
+#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */
+#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */
+#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */
+#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */
+#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */
+#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */
+#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */
+#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */
+#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */
+#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */
+#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */
+#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */
+#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */
+
+/*
+ * PXA2xx specific Core clock definitions
+ */
+#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */
+#define CCSR __REG(0x4130000C) /* Core Clock Status Register */
+#define CKEN __REG(0x41300004) /* Clock Enable Register */
+#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */
+
+#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */
+#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */
+
+#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */
+#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */
+#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */
+#define CKEN_MEMC (22) /* Memory Controller Clock Enable */
+#define CKEN_MEMSTK (21) /* Memory Stick Host Controller */
+#define CKEN_IM (20) /* Internal Memory Clock Enable */
+#define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */
+#define CKEN_USIM (18) /* USIM Unit Clock Enable */
+#define CKEN_MSL (17) /* MSL Unit Clock Enable */
+#define CKEN_LCD (16) /* LCD Unit Clock Enable */
+#define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */
+#define CKEN_I2C (14) /* I2C Unit Clock Enable */
+#define CKEN_FICP (13) /* FICP Unit Clock Enable */
+#define CKEN_MMC (12) /* MMC Unit Clock Enable */
+#define CKEN_USB (11) /* USB Unit Clock Enable */
+#define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */
+#define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */
+#define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */
+#define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */
+#define CKEN_I2S (8) /* I2S Unit Clock Enable */
+#define CKEN_BTUART (7) /* BTUART Unit Clock Enable */
+#define CKEN_FFUART (6) /* FFUART Unit Clock Enable */
+#define CKEN_STUART (5) /* STUART Unit Clock Enable */
+#define CKEN_HWUART (4) /* HWUART Unit Clock Enable */
+#define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */
+#define CKEN_SSP (3) /* SSP Unit Clock Enable */
+#define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */
+#define CKEN_AC97 (2) /* AC97 Unit Clock Enable */
+#define CKEN_PWM1 (1) /* PWM1 Clock Enable */
+#define CKEN_PWM0 (0) /* PWM0 Clock Enable */
+
+#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
+#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
+
#endif
diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h
index 9aa6c2e939e8..ba7e132de1b3 100644
--- a/include/asm-arm/arch-pxa/system.h
+++ b/include/asm-arm/arch-pxa/system.h
@@ -12,6 +12,7 @@
#include <asm/proc-fns.h>
#include "hardware.h"
+#include "pxa2xx-regs.h"
#include "pxa-regs.h"
static inline void arch_idle(void)
diff --git a/include/asm-arm/arch-pxa/zylonite.h b/include/asm-arm/arch-pxa/zylonite.h
index 4881b80f0f90..de577de8d18c 100644
--- a/include/asm-arm/arch-pxa/zylonite.h
+++ b/include/asm-arm/arch-pxa/zylonite.h
@@ -15,7 +15,6 @@ struct platform_mmc_slot {
extern struct platform_mmc_slot zylonite_mmc_slot[];
-extern int gpio_backlight;
extern int gpio_eth_irq;
extern int wm9713_irq;
diff --git a/include/asm-arm/arch-rpc/io.h b/include/asm-arm/arch-rpc/io.h
index b4da08d7a336..6bd2295c0e01 100644
--- a/include/asm-arm/arch-rpc/io.h
+++ b/include/asm-arm/arch-rpc/io.h
@@ -126,7 +126,7 @@ static inline unsigned sz __in##fnsuffix (unsigned int port) \
return (unsigned sz)value; \
}
-static inline void __iomem *__ioaddr(unsigned int port)
+static inline void __iomem *__deprecated __ioaddr(unsigned int port)
{
void __iomem *ret;
if (__PORT_PCIO(port))
@@ -232,8 +232,7 @@ DECLARE_IO(int,l,"")
result; \
})
-#define __ioaddrc(port) \
- ((__PORT_PCIO(port) ? PCIO_BASE : IO_BASE) + ((port) << 2))
+#define __ioaddrc(port) __ioaddr(port)
#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p))
#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p))
diff --git a/include/asm-arm/arch-s3c2410/gpio.h b/include/asm-arm/arch-s3c2410/gpio.h
index 7583895fd336..18e10d2c35ea 100644
--- a/include/asm-arm/arch-s3c2410/gpio.h
+++ b/include/asm-arm/arch-s3c2410/gpio.h
@@ -1,68 +1,18 @@
-/*
- * linux/include/asm-arm/arch-s3c2410/gpio.h
+/* linux/include/asm-arm/arch-s3c2410/gpio.h
*
- * S3C2410 GPIO wrappers for arch-neutral GPIO calls
+ * Copyright (c) 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
*
- * Written by Philipp Zabel <philipp.zabel@gmail.com>
+ * S3C2410 - GPIO lib support
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_S3C2410_GPIO_H
-#define __ASM_ARCH_S3C2410_GPIO_H
-
-#include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/arch/regs-gpio.h>
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
- return;
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
- s3c2410_gpio_cfgpin(gpio, S3C2410_GPIO_INPUT);
- return 0;
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
- s3c2410_gpio_cfgpin(gpio, S3C2410_GPIO_OUTPUT);
- /* REVISIT can we write the value first, to avoid glitching? */
- s3c2410_gpio_setpin(gpio, value);
- return 0;
-}
-
-#define gpio_get_value(gpio) s3c2410_gpio_getpin(gpio)
-#define gpio_set_value(gpio,value) s3c2410_gpio_setpin(gpio, value)
-
-#include <asm-generic/gpio.h> /* cansleep wrappers */
-
-#ifdef CONFIG_CPU_S3C2400
-#define gpio_to_irq(gpio) s3c2400_gpio_getirq(gpio)
-#else
-#define gpio_to_irq(gpio) s3c2410_gpio_getirq(gpio)
-#endif
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
-/* FIXME implement irq_to_gpio() */
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
-#endif
+#include <asm-generic/gpio.h>
diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h
index ecae9e7f5e45..37661358b42b 100644
--- a/include/asm-arm/arch-s3c2410/regs-clock.h
+++ b/include/asm-arm/arch-s3c2410/regs-clock.h
@@ -189,6 +189,8 @@ s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
#define S3C2412_CLKSRC_I2SCLK_MPLL (1<<9)
#define S3C2412_CLKSRC_USBCLK_HCLK (1<<10)
#define S3C2412_CLKSRC_CAMCLK_HCLK (1<<11)
+#define S3C2412_CLKSRC_UREFCLK_EXTCLK (1<<12)
+#define S3C2412_CLKSRC_EREFCLK_EXTCLK (1<<14)
#endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */
diff --git a/include/asm-arm/assembler.h b/include/asm-arm/assembler.h
index fce832820825..911393b2c6f0 100644
--- a/include/asm-arm/assembler.h
+++ b/include/asm-arm/assembler.h
@@ -56,6 +56,21 @@
#endif
/*
+ * This can be used to enable code to cacheline align the destination
+ * pointer when bulk writing to memory. Experiments on StrongARM and
+ * XScale didn't show this a worthwhile thing to do when the cache is not
+ * set to write-allocate (this would need further testing on XScale when WA
+ * is used).
+ *
+ * On Feroceon there is much to gain however, regardless of cache mode.
+ */
+#ifdef CONFIG_CPU_FEROCEON
+#define CALGN(code...) code
+#else
+#define CALGN(code...)
+#endif
+
+/*
* Enable and disable interrupts
*/
#if __LINUX_ARM_ARCH__ >= 6
diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h
index 759a97b56eed..70b0fe724b62 100644
--- a/include/asm-arm/cacheflush.h
+++ b/include/asm-arm/cacheflush.h
@@ -95,11 +95,7 @@
#endif
#if defined(CONFIG_CPU_FEROCEON)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE feroceon
-# endif
+# define MULTI_CACHE 1
#endif
#if defined(CONFIG_CPU_V6)
@@ -410,6 +406,13 @@ extern void flush_dcache_page(struct page *);
extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
+static inline void __flush_icache_all(void)
+{
+ asm("mcr p15, 0, %0, c7, c5, 0 @ invalidate I-cache\n"
+ :
+ : "r" (0));
+}
+
#define ARCH_HAS_FLUSH_ANON_PAGE
static inline void flush_anon_page(struct vm_area_struct *vma,
struct page *page, unsigned long vmaddr)
diff --git a/include/asm-arm/dyntick.h b/include/asm-arm/dyntick.h
deleted file mode 100644
index 19fab2d2b760..000000000000
--- a/include/asm-arm/dyntick.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASMARM_DYNTICK_H
-#define _ASMARM_DYNTICK_H
-
-#include <asm/mach/time.h>
-
-#endif /* _ASMARM_DYNTICK_H */
diff --git a/include/asm-arm/ecard.h b/include/asm-arm/ecard.h
index 684fe0645239..5e22881a630d 100644
--- a/include/asm-arm/ecard.h
+++ b/include/asm-arm/ecard.h
@@ -85,19 +85,6 @@
#define MAX_ECARDS 9
-typedef enum { /* Cards address space */
- ECARD_IOC,
- ECARD_MEMC,
- ECARD_EASI
-} card_type_t;
-
-typedef enum { /* Speed for ECARD_IOC space */
- ECARD_SLOW = 0,
- ECARD_MEDIUM = 1,
- ECARD_FAST = 2,
- ECARD_SYNC = 3
-} card_speed_t;
-
struct ecard_id { /* Card ID structure */
unsigned short manufacturer;
unsigned short product;
@@ -190,16 +177,6 @@ struct in_chunk_dir {
};
/*
- * ecard_claim: claim an expansion card entry
- */
-#define ecard_claim(ec) ((ec)->claimed = 1)
-
-/*
- * ecard_release: release an expansion card entry
- */
-#define ecard_release(ec) ((ec)->claimed = 0)
-
-/*
* Read a chunk from an expansion card
* cd : where to put read data
* ec : expansion card info struct
@@ -209,18 +186,6 @@ struct in_chunk_dir {
extern int ecard_readchunk (struct in_chunk_dir *cd, struct expansion_card *ec, int id, int num);
/*
- * Obtain the address of a card. This returns the "old style" address
- * and should no longer be used.
- */
-static inline unsigned int __deprecated
-ecard_address(struct expansion_card *ec, card_type_t type, card_speed_t speed)
-{
- extern unsigned int __ecard_address(struct expansion_card *,
- card_type_t, card_speed_t);
- return __ecard_address(ec, type, speed);
-}
-
-/*
* Request and release ecard resources
*/
extern int ecard_request_resources(struct expansion_card *ec);
diff --git a/include/asm-arm/hardware/iop3xx-gpio.h b/include/asm-arm/hardware/iop3xx-gpio.h
new file mode 100644
index 000000000000..0c9331f9ac24
--- /dev/null
+++ b/include/asm-arm/hardware/iop3xx-gpio.h
@@ -0,0 +1,73 @@
+/*
+ * linux/include/asm-arm/hardware/iop3xx-gpio.h
+ *
+ * IOP3xx GPIO wrappers
+ *
+ * Copyright (c) 2008 Arnaud Patard <arnaud.patard@rtp-net.org>
+ * Based on IXP4XX gpio.h file
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
+#define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
+
+#include <asm/hardware.h>
+#include <asm-generic/gpio.h>
+
+#define IOP3XX_N_GPIOS 8
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ if (gpio > IOP3XX_N_GPIOS)
+ return __gpio_get_value(gpio);
+
+ return gpio_line_get(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ if (gpio > IOP3XX_N_GPIOS) {
+ __gpio_set_value(gpio, value);
+ return;
+ }
+ gpio_line_set(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+ if (gpio < IOP3XX_N_GPIOS)
+ return 0;
+ else
+ return __gpio_cansleep(gpio);
+}
+
+/*
+ * The GPIOs are not generating any interrupt
+ * Note : manuals are not clear about this
+ */
+static inline int gpio_to_irq(int gpio)
+{
+ return -EINVAL;
+}
+
+static inline int irq_to_gpio(int gpio)
+{
+ return -EINVAL;
+}
+
+#endif
+
diff --git a/include/asm-arm/hw_irq.h b/include/asm-arm/hw_irq.h
index 98d594a973d6..f1a08a500604 100644
--- a/include/asm-arm/hw_irq.h
+++ b/include/asm-arm/hw_irq.h
@@ -6,15 +6,4 @@
#include <asm/mach/irq.h>
-#if defined(CONFIG_NO_IDLE_HZ)
-# include <asm/dyntick.h>
-# define handle_dynamic_tick(action) \
- if (!(action->flags & IRQF_TIMER) && system_timer->dyn_tick) { \
- write_seqlock(&xtime_lock); \
- if (system_timer->dyn_tick->state & DYN_TICK_ENABLED) \
- system_timer->dyn_tick->handler(irq, NULL); \
- write_sequnlock(&xtime_lock); \
- }
-#endif
-
#endif
diff --git a/include/asm-arm/kexec.h b/include/asm-arm/kexec.h
index 47fe34d692da..c8986bb99ed5 100644
--- a/include/asm-arm/kexec.h
+++ b/include/asm-arm/kexec.h
@@ -14,8 +14,6 @@
#define KEXEC_ARCH KEXEC_ARCH_ARM
-#define KEXEC_BOOT_PARAMS_SIZE 1536
-
#define KEXEC_ARM_ATAGS_OFFSET 0x1000
#define KEXEC_ARM_ZIMAGE_OFFSET 0x8000
diff --git a/include/asm-arm/mach/time.h b/include/asm-arm/mach/time.h
index 5dc357013b79..2fd36ea0130d 100644
--- a/include/asm-arm/mach/time.h
+++ b/include/asm-arm/mach/time.h
@@ -41,30 +41,8 @@ struct sys_timer {
#ifndef CONFIG_GENERIC_TIME
unsigned long (*offset)(void);
#endif
-
-#ifdef CONFIG_NO_IDLE_HZ
- struct dyn_tick_timer *dyn_tick;
-#endif
-};
-
-#ifdef CONFIG_NO_IDLE_HZ
-
-#define DYN_TICK_ENABLED (1 << 1)
-
-struct dyn_tick_timer {
- spinlock_t lock;
- unsigned int state; /* Current state */
- int (*enable)(void); /* Enables dynamic tick */
- int (*disable)(void); /* Disables dynamic tick */
- void (*reprogram)(unsigned long); /* Reprograms the timer */
- int (*handler)(int, void *);
};
-void timer_dyn_reprogram(void);
-#else
-#define timer_dyn_reprogram() do { } while (0)
-#endif
-
extern struct sys_timer *system_timer;
extern void timer_tick(void);
diff --git a/include/asm-arm/mmu_context.h b/include/asm-arm/mmu_context.h
index 6913d02ca5d6..91b9dfdfed52 100644
--- a/include/asm-arm/mmu_context.h
+++ b/include/asm-arm/mmu_context.h
@@ -97,6 +97,11 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
#ifdef CONFIG_MMU
unsigned int cpu = smp_processor_id();
+#ifdef CONFIG_SMP
+ /* check for possible thread migration */
+ if (!cpus_empty(next->cpu_vm_mask) && !cpu_isset(cpu, next->cpu_vm_mask))
+ __flush_icache_all();
+#endif
if (!cpu_test_and_set(cpu, next->cpu_vm_mask) || prev != next) {
check_context(next);
cpu_switch_mm(next->pgd, next);
diff --git a/include/asm-arm/plat-orion/cache-feroceon-l2.h b/include/asm-arm/plat-orion/cache-feroceon-l2.h
new file mode 100644
index 000000000000..ba4e016d3ec0
--- /dev/null
+++ b/include/asm-arm/plat-orion/cache-feroceon-l2.h
@@ -0,0 +1,11 @@
+/*
+ * include/asm-arm/plat-orion/cache-feroceon-l2.h
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+extern void __init feroceon_l2_init(int l2_wt_override);
diff --git a/include/asm-arm/plat-orion/orion_nand.h b/include/asm-arm/plat-orion/orion_nand.h
index ffd3852a0dd7..ad4ce94c1998 100644
--- a/include/asm-arm/plat-orion/orion_nand.h
+++ b/include/asm-arm/plat-orion/orion_nand.h
@@ -18,6 +18,7 @@ struct orion_nand_data {
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
u8 width; /* buswidth */
+ u8 chip_delay;
};
diff --git a/include/asm-arm/plat-orion/pcie.h b/include/asm-arm/plat-orion/pcie.h
index 6434ac685d21..e61b7bd97af5 100644
--- a/include/asm-arm/plat-orion/pcie.h
+++ b/include/asm-arm/plat-orion/pcie.h
@@ -14,6 +14,7 @@
u32 orion_pcie_dev_id(void __iomem *base);
u32 orion_pcie_rev(void __iomem *base);
int orion_pcie_link_up(void __iomem *base);
+int orion_pcie_x4_mode(void __iomem *base);
int orion_pcie_get_local_bus_nr(void __iomem *base);
void orion_pcie_set_local_bus_nr(void __iomem *base, int nr);
void orion_pcie_setup(void __iomem *base,
diff --git a/include/asm-arm/plat-s3c/regs-timer.h b/include/asm-arm/plat-s3c/regs-timer.h
index 8b0d594397b1..b5bc692f3489 100644
--- a/include/asm-arm/plat-s3c/regs-timer.h
+++ b/include/asm-arm/plat-s3c/regs-timer.h
@@ -65,6 +65,15 @@
#define S3C2410_TCFG1_MUX0_TCLK0 (4<<0)
#define S3C2410_TCFG1_MUX0_MASK (15<<0)
+#define S3C2410_TCFG1_MUX_DIV2 (0<<0)
+#define S3C2410_TCFG1_MUX_DIV4 (1<<0)
+#define S3C2410_TCFG1_MUX_DIV8 (2<<0)
+#define S3C2410_TCFG1_MUX_DIV16 (3<<0)
+#define S3C2410_TCFG1_MUX_TCLK (4<<0)
+#define S3C2410_TCFG1_MUX_MASK (15<<0)
+
+#define S3C2410_TCFG1_SHIFT(x) ((x) * 4)
+
/* for each timer, we have an count buffer, an compare buffer and
* an observation buffer
*/
diff --git a/include/asm-arm/plat-s3c24xx/devs.h b/include/asm-arm/plat-s3c24xx/devs.h
index f9d6f0317bc1..badaac9d64a8 100644
--- a/include/asm-arm/plat-s3c24xx/devs.h
+++ b/include/asm-arm/plat-s3c24xx/devs.h
@@ -21,6 +21,8 @@ extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
extern struct platform_device *s3c24xx_uart_devs[];
extern struct platform_device *s3c24xx_uart_src[];
+extern struct platform_device s3c_device_timer[];
+
extern struct platform_device s3c_device_usb;
extern struct platform_device s3c_device_lcd;
extern struct platform_device s3c_device_wdt;
@@ -36,11 +38,6 @@ extern struct platform_device s3c_device_spi1;
extern struct platform_device s3c_device_nand;
-extern struct platform_device s3c_device_timer0;
-extern struct platform_device s3c_device_timer1;
-extern struct platform_device s3c_device_timer2;
-extern struct platform_device s3c_device_timer3;
-
extern struct platform_device s3c_device_usbgadget;
/* s3c2440 specific devices */
diff --git a/include/asm-arm/rtc.h b/include/asm-arm/rtc.h
deleted file mode 100644
index 1a5c9232a91e..000000000000
--- a/include/asm-arm/rtc.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * linux/include/asm-arm/rtc.h
- *
- * Copyright (C) 2003 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_RTC_H
-#define ASMARM_RTC_H
-
-struct module;
-
-struct rtc_ops {
- struct module *owner;
- int (*open)(void);
- void (*release)(void);
- int (*ioctl)(unsigned int, unsigned long);
-
- int (*read_time)(struct rtc_time *);
- int (*set_time)(struct rtc_time *);
- int (*read_alarm)(struct rtc_wkalrm *);
- int (*set_alarm)(struct rtc_wkalrm *);
- int (*proc)(char *buf);
-};
-
-void rtc_next_alarm_time(struct rtc_time *, struct rtc_time *, struct rtc_time *);
-void rtc_update(unsigned long, unsigned long);
-int register_rtc(struct rtc_ops *);
-void unregister_rtc(struct rtc_ops *);
-
-static inline int rtc_periodic_alarm(struct rtc_time *tm)
-{
- return (tm->tm_year == -1) ||
- ((unsigned)tm->tm_mon >= 12) ||
- ((unsigned)(tm->tm_mday - 1) >= 31) ||
- ((unsigned)tm->tm_hour > 23) ||
- ((unsigned)tm->tm_min > 59) ||
- ((unsigned)tm->tm_sec > 59);
-}
-
-#endif
diff --git a/include/asm-arm/tlbflush.h b/include/asm-arm/tlbflush.h
index 8c6bc1bb9d1a..909656c747ef 100644
--- a/include/asm-arm/tlbflush.h
+++ b/include/asm-arm/tlbflush.h
@@ -39,6 +39,7 @@
#define TLB_V6_D_ASID (1 << 17)
#define TLB_V6_I_ASID (1 << 18)
+#define TLB_L2CLEAN_FR (1 << 29) /* Feroceon */
#define TLB_DCLEAN (1 << 30)
#define TLB_WB (1 << 31)
@@ -51,6 +52,7 @@
* v4 - ARMv4 without write buffer
* v4wb - ARMv4 with write buffer without I TLB flush entry instruction
* v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
+ * fr - Feroceon (v4wbi with non-outer-cacheable page table walks)
* v6wbi - ARMv6 with write buffer with I TLB flush entry instruction
*/
#undef _TLB
@@ -103,6 +105,23 @@
# define v4wbi_always_flags (-1UL)
#endif
+#define fr_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_L2CLEAN_FR | \
+ TLB_V4_I_FULL | TLB_V4_D_FULL | \
+ TLB_V4_I_PAGE | TLB_V4_D_PAGE)
+
+#ifdef CONFIG_CPU_TLB_FEROCEON
+# define fr_possible_flags fr_tlb_flags
+# define fr_always_flags fr_tlb_flags
+# ifdef _TLB
+# define MULTI_TLB 1
+# else
+# define _TLB v4wbi
+# endif
+#else
+# define fr_possible_flags 0
+# define fr_always_flags (-1UL)
+#endif
+
#define v4wb_tlb_flags (TLB_WB | TLB_DCLEAN | \
TLB_V4_I_FULL | TLB_V4_D_FULL | \
TLB_V4_D_PAGE)
@@ -245,12 +264,14 @@ extern struct cpu_tlb_fns cpu_tlb;
#define possible_tlb_flags (v3_possible_flags | \
v4_possible_flags | \
v4wbi_possible_flags | \
+ fr_possible_flags | \
v4wb_possible_flags | \
v6wbi_possible_flags)
#define always_tlb_flags (v3_always_flags & \
v4_always_flags & \
v4wbi_always_flags & \
+ fr_always_flags & \
v4wb_always_flags & \
v6wbi_always_flags)
@@ -417,6 +438,11 @@ static inline void flush_pmd_entry(pmd_t *pmd)
if (tlb_flag(TLB_DCLEAN))
asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd"
: : "r" (pmd) : "cc");
+
+ if (tlb_flag(TLB_L2CLEAN_FR))
+ asm("mcr p15, 1, %0, c15, c9, 1 @ L2 flush_pmd"
+ : : "r" (pmd) : "cc");
+
if (tlb_flag(TLB_WB))
dsb();
}
@@ -428,6 +454,10 @@ static inline void clean_pmd_entry(pmd_t *pmd)
if (tlb_flag(TLB_DCLEAN))
asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd"
: : "r" (pmd) : "cc");
+
+ if (tlb_flag(TLB_L2CLEAN_FR))
+ asm("mcr p15, 1, %0, c15, c9, 1 @ L2 flush_pmd"
+ : : "r" (pmd) : "cc");
}
#undef tlb_flag
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
new file mode 100644
index 000000000000..3945f803d514
--- /dev/null
+++ b/include/linux/pwm.h
@@ -0,0 +1,31 @@
+#ifndef __LINUX_PWM_H
+#define __LINUX_PWM_H
+
+struct pwm_device;
+
+/*
+ * pwm_request - request a PWM device
+ */
+struct pwm_device *pwm_request(int pwm_id, const char *label);
+
+/*
+ * pwm_free - free a PWM device
+ */
+void pwm_free(struct pwm_device *pwm);
+
+/*
+ * pwm_config - change a PWM device configuration
+ */
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns);
+
+/*
+ * pwm_enable - start a PWM output toggling
+ */
+int pwm_enable(struct pwm_device *pwm);
+
+/*
+ * pwm_disable - stop a PWM output toggling
+ */
+void pwm_disable(struct pwm_device *pwm);
+
+#endif /* __ASM_ARCH_PWM_H */
diff --git a/include/linux/pwm_backlight.h b/include/linux/pwm_backlight.h
new file mode 100644
index 000000000000..7a9754c96775
--- /dev/null
+++ b/include/linux/pwm_backlight.h
@@ -0,0 +1,17 @@
+/*
+ * Generic PWM backlight driver data - see drivers/video/backlight/pwm_bl.c
+ */
+#ifndef __LINUX_PWM_BACKLIGHT_H
+#define __LINUX_PWM_BACKLIGHT_H
+
+struct platform_pwm_backlight_data {
+ int pwm_id;
+ unsigned int max_brightness;
+ unsigned int dft_brightness;
+ unsigned int pwm_period_ns;
+ int (*init)(struct device *dev);
+ int (*notify)(int brightness);
+ void (*exit)(struct device *dev);
+};
+
+#endif
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index e0da4fc9f931..27a83ee41443 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -1086,7 +1086,7 @@ ktime_t hrtimer_get_remaining(const struct hrtimer *timer)
}
EXPORT_SYMBOL_GPL(hrtimer_get_remaining);
-#if defined(CONFIG_NO_IDLE_HZ) || defined(CONFIG_NO_HZ)
+#ifdef CONFIG_NO_HZ
/**
* hrtimer_get_next_event - get the time until next expiry event
*
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 18943985ddee..0d562d6531eb 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -133,8 +133,6 @@ extern int sysctl_userprocess_debug;
extern int spin_retry;
#endif
-extern int sysctl_hz_timer;
-
#ifdef CONFIG_BSD_PROCESS_ACCT
extern int acct_parm[];
#endif
@@ -582,16 +580,6 @@ static struct ctl_table kern_table[] = {
.proc_handler = &proc_dointvec,
},
#endif
-#ifdef CONFIG_NO_IDLE_HZ
- {
- .ctl_name = KERN_HZ_TIMER,
- .procname = "hz_timer",
- .data = &sysctl_hz_timer,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = &proc_dointvec,
- },
-#endif
{
.ctl_name = KERN_S390_USER_DEBUG_LOGGING,
.procname = "userprocess_debug",
diff --git a/kernel/timer.c b/kernel/timer.c
index b4da888497fa..03bc7f1f1593 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -812,7 +812,7 @@ static inline void __run_timers(struct tvec_base *base)
spin_unlock_irq(&base->lock);
}
-#if defined(CONFIG_NO_IDLE_HZ) || defined(CONFIG_NO_HZ)
+#ifdef CONFIG_NO_HZ
/*
* Find out when the next timer event is due to happen. This
* is used on S/390 to stop all activity when a cpus is idle.
@@ -947,14 +947,6 @@ unsigned long get_next_timer_interrupt(unsigned long now)
return cmp_next_hrtimer_event(now, expires);
}
-
-#ifdef CONFIG_NO_IDLE_HZ
-unsigned long next_timer_interrupt(void)
-{
- return get_next_timer_interrupt(jiffies);
-}
-#endif
-
#endif
#ifndef CONFIG_VIRT_CPU_ACCOUNTING
diff --git a/sound/soc/at91/at91-ssc.c b/sound/soc/at91/at91-ssc.c
index c3625b665c5a..090e607f8692 100644
--- a/sound/soc/at91/at91-ssc.c
+++ b/sound/soc/at91/at91-ssc.c
@@ -41,7 +41,7 @@
#define DBG(x...)
#endif
-#if defined(CONFIG_ARCH_AT91SAM9260)
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
#define NUM_SSC_DEVICES 1
#else
#define NUM_SSC_DEVICES 3
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 9c06553b9267..8f96d87f7b4b 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/device.h>
#include <linux/delay.h>
+#include <linux/clk.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/initval.h>
@@ -37,6 +38,7 @@ struct pxa_i2s_port {
u32 fmt;
};
static struct pxa_i2s_port pxa_i2s;
+static struct clk *clk_i2s;
static struct pxa2xx_pcm_dma_params pxa2xx_i2s_pcm_stereo_out = {
.name = "I2S PCM Stereo out",
@@ -79,6 +81,10 @@ static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream)
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ clk_i2s = clk_get(NULL, "I2SCLK");
+ if (IS_ERR(clk_i2s))
+ return PTR_ERR(clk_i2s);
+
if (!cpu_dai->active) {
SACR0 |= SACR0_RST;
SACR0 = 0;
@@ -146,7 +152,7 @@ static int pxa2xx_i2s_hw_params(struct snd_pcm_substream *substream,
pxa_gpio_mode(gpio_bus[pxa_i2s.master].tx);
pxa_gpio_mode(gpio_bus[pxa_i2s.master].frm);
pxa_gpio_mode(gpio_bus[pxa_i2s.master].clk);
- pxa_set_cken(CKEN_I2S, 1);
+ clk_enable(clk_i2s);
pxa_i2s_wait();
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
@@ -231,8 +237,10 @@ static void pxa2xx_i2s_shutdown(struct snd_pcm_substream *substream)
if (SACR1 & (SACR1_DREC | SACR1_DRPL)) {
SACR0 &= ~SACR0_ENB;
pxa_i2s_wait();
- pxa_set_cken(CKEN_I2S, 0);
+ clk_disable(clk_i2s);
}
+
+ clk_put(clk_i2s);
}
#ifdef CONFIG_PM