summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/DocBook/libata.tmpl47
-rw-r--r--drivers/scsi/libata-bmdma.c26
-rw-r--r--drivers/scsi/libata-core.c168
-rw-r--r--drivers/scsi/sata_mv.c42
-rw-r--r--include/linux/libata.h10
5 files changed, 164 insertions, 129 deletions
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index d260d92089ad..5bcbb6ee3bc0 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -120,14 +120,27 @@ void (*dev_config) (struct ata_port *, struct ata_device *);
<programlisting>
void (*set_piomode) (struct ata_port *, struct ata_device *);
void (*set_dmamode) (struct ata_port *, struct ata_device *);
-void (*post_set_mode) (struct ata_port *ap);
+void (*post_set_mode) (struct ata_port *);
+unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned int);
</programlisting>
<para>
Hooks called prior to the issue of SET FEATURES - XFER MODE
- command. dev->pio_mode is guaranteed to be valid when
- ->set_piomode() is called, and dev->dma_mode is guaranteed to be
- valid when ->set_dmamode() is called. ->post_set_mode() is
+ command. The optional ->mode_filter() hook is called when libata
+ has built a mask of the possible modes. This is passed to the
+ ->mode_filter() function which should return a mask of valid modes
+ after filtering those unsuitable due to hardware limits. It is not
+ valid to use this interface to add modes.
+ </para>
+ <para>
+ dev->pio_mode and dev->dma_mode are guaranteed to be valid when
+ ->set_piomode() and when ->set_dmamode() is called. The timings for
+ any other drive sharing the cable will also be valid at this point.
+ That is the library records the decisions for the modes of each
+ drive on a channel before it attempts to set any of them.
+ </para>
+ <para>
+ ->post_set_mode() is
called unconditionally, after the SET FEATURES - XFER MODE
command completes successfully.
</para>
@@ -230,6 +243,32 @@ void (*dev_select)(struct ata_port *ap, unsigned int device);
</sect2>
+ <sect2><title>Private tuning method</title>
+ <programlisting>
+void (*set_mode) (struct ata_port *ap);
+ </programlisting>
+
+ <para>
+ By default libata performs drive and controller tuning in
+ accordance with the ATA timing rules and also applies blacklists
+ and cable limits. Some controllers need special handling and have
+ custom tuning rules, typically raid controllers that use ATA
+ commands but do not actually do drive timing.
+ </para>
+
+ <warning>
+ <para>
+ This hook should not be used to replace the standard controller
+ tuning logic when a controller has quirks. Replacing the default
+ tuning logic in that case would bypass handling for drive and
+ bridge quirks that may be important to data reliability. If a
+ controller needs to filter the mode selection it should use the
+ mode_filter hook instead.
+ </para>
+ </warning>
+
+ </sect2>
+
<sect2><title>Reset ATA bus</title>
<programlisting>
void (*phy_reset) (struct ata_port *ap);
diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c
index 95d81d86d8b7..835dff0bafdc 100644
--- a/drivers/scsi/libata-bmdma.c
+++ b/drivers/scsi/libata-bmdma.c
@@ -703,6 +703,7 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int
struct ata_probe_ent *probe_ent =
ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
int p = 0;
+ unsigned long bmdma;
if (!probe_ent)
return NULL;
@@ -716,7 +717,12 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int
probe_ent->port[p].altstatus_addr =
probe_ent->port[p].ctl_addr =
pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
- probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4);
+ bmdma = pci_resource_start(pdev, 4);
+ if (bmdma) {
+ if (inb(bmdma + 2) & 0x80)
+ probe_ent->host_set_flags |= ATA_HOST_SIMPLEX;
+ probe_ent->port[p].bmdma_addr = bmdma;
+ }
ata_std_ports(&probe_ent->port[p]);
p++;
}
@@ -726,7 +732,13 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int
probe_ent->port[p].altstatus_addr =
probe_ent->port[p].ctl_addr =
pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS;
- probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4) + 8;
+ bmdma = pci_resource_start(pdev, 4);
+ if (bmdma) {
+ bmdma += 8;
+ if(inb(bmdma + 2) & 0x80)
+ probe_ent->host_set_flags |= ATA_HOST_SIMPLEX;
+ probe_ent->port[p].bmdma_addr = bmdma;
+ }
ata_std_ports(&probe_ent->port[p]);
p++;
}
@@ -740,6 +752,7 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev,
struct ata_port_info *port, int port_num)
{
struct ata_probe_ent *probe_ent;
+ unsigned long bmdma;
probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port);
if (!probe_ent)
@@ -766,8 +779,13 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev,
break;
}
- probe_ent->port[0].bmdma_addr =
- pci_resource_start(pdev, 4) + 8 * port_num;
+ bmdma = pci_resource_start(pdev, 4);
+ if (bmdma != 0) {
+ bmdma += 8 * port_num;
+ probe_ent->port[0].bmdma_addr = bmdma;
+ if (inb(bmdma + 2) & 0x80)
+ probe_ent->host_set_flags |= ATA_HOST_SIMPLEX;
+ }
ata_std_ports(&probe_ent->port[0]);
return probe_ent;
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index d279666dcb38..21b0ed583b8a 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -62,7 +62,9 @@
#include "libata.h"
static unsigned int ata_dev_init_params(struct ata_port *ap,
- struct ata_device *dev);
+ struct ata_device *dev,
+ u16 heads,
+ u16 sectors);
static void ata_set_mode(struct ata_port *ap);
static unsigned int ata_dev_set_xfermode(struct ata_port *ap,
struct ata_device *dev);
@@ -1081,9 +1083,8 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev)
*
* Read ID data from the specified device. ATA_CMD_ID_ATA is
* performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI
- * devices. This function also takes care of EDD signature
- * misreporting (to be removed once EDD support is gone) and
- * issues ATA_CMD_INIT_DEV_PARAMS for pre-ATA4 drives.
+ * devices. This function also issues ATA_CMD_INIT_DEV_PARAMS
+ * for pre-ATA4 drives.
*
* LOCKING:
* Kernel thread context (may sleep)
@@ -1095,7 +1096,6 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev,
unsigned int *p_class, int post_reset, u16 **p_id)
{
unsigned int class = *p_class;
- unsigned int using_edd;
struct ata_taskfile tf;
unsigned int err_mask = 0;
u16 *id;
@@ -1104,12 +1104,6 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev,
DPRINTK("ENTER, host %u, dev %u\n", ap->id, dev->devno);
- if (ap->ops->probe_reset ||
- ap->flags & (ATA_FLAG_SRST | ATA_FLAG_SATA_RESET))
- using_edd = 0;
- else
- using_edd = 1;
-
ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */
id = kmalloc(sizeof(id[0]) * ATA_ID_WORDS, GFP_KERNEL);
@@ -1139,39 +1133,16 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev,
err_mask = ata_exec_internal(ap, dev, &tf, DMA_FROM_DEVICE,
id, sizeof(id[0]) * ATA_ID_WORDS);
-
if (err_mask) {
rc = -EIO;
reason = "I/O error";
-
- if (err_mask & ~AC_ERR_DEV)
- goto err_out;
-
- /*
- * arg! EDD works for all test cases, but seems to return
- * the ATA signature for some ATAPI devices. Until the
- * reason for this is found and fixed, we fix up the mess
- * here. If IDENTIFY DEVICE returns command aborted
- * (as ATAPI devices do), then we issue an
- * IDENTIFY PACKET DEVICE.
- *
- * ATA software reset (SRST, the default) does not appear
- * to have this problem.
- */
- if ((using_edd) && (class == ATA_DEV_ATA)) {
- u8 err = tf.feature;
- if (err & ATA_ABORTED) {
- class = ATA_DEV_ATAPI;
- goto retry;
- }
- }
goto err_out;
}
swap_buf_le16(id, ATA_ID_WORDS);
/* sanity check */
- if ((class == ATA_DEV_ATA) != ata_id_is_ata(id)) {
+ if ((class == ATA_DEV_ATA) != (ata_id_is_ata(id) | ata_id_is_cfa(id))) {
rc = -EINVAL;
reason = "device reports illegal type";
goto err_out;
@@ -1187,7 +1158,7 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev,
* Some drives were very specific about that exact sequence.
*/
if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) {
- err_mask = ata_dev_init_params(ap, dev);
+ err_mask = ata_dev_init_params(ap, dev, id[3], id[6]);
if (err_mask) {
rc = -EIO;
reason = "INIT_DEV_PARAMS failed";
@@ -1440,7 +1411,11 @@ static int ata_bus_probe(struct ata_port *ap)
if (!found)
goto err_out_disable;
- ata_set_mode(ap);
+ if (ap->ops->set_mode)
+ ap->ops->set_mode(ap);
+ else
+ ata_set_mode(ap);
+
if (ap->flags & ATA_FLAG_PORT_DISABLED)
goto err_out_disable;
@@ -1845,7 +1820,7 @@ static void ata_host_set_dma(struct ata_port *ap)
*/
static void ata_set_mode(struct ata_port *ap)
{
- int i, rc;
+ int i, rc, used_dma = 0;
/* step 1: calculate xfer_mask */
for (i = 0; i < ATA_MAX_DEVICES; i++) {
@@ -1863,6 +1838,9 @@ static void ata_set_mode(struct ata_port *ap)
dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask);
dev->pio_mode = ata_xfer_mask2mode(pio_mask);
dev->dma_mode = ata_xfer_mask2mode(dma_mask);
+
+ if (dev->dma_mode)
+ used_dma = 1;
}
/* step 2: always set host PIO timings */
@@ -1884,6 +1862,17 @@ static void ata_set_mode(struct ata_port *ap)
goto err_out;
}
+ /*
+ * Record simplex status. If we selected DMA then the other
+ * host channels are not permitted to do so.
+ */
+
+ if (used_dma && (ap->host_set->flags & ATA_HOST_SIMPLEX))
+ ap->host_set->simplex_claimed = 1;
+
+ /*
+ * Chip specific finalisation
+ */
if (ap->ops->post_set_mode)
ap->ops->post_set_mode(ap);
@@ -2005,45 +1994,6 @@ static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask)
ap->ops->dev_select(ap, 0);
}
-/**
- * ata_bus_edd - Issue EXECUTE DEVICE DIAGNOSTIC command.
- * @ap: Port to reset and probe
- *
- * Use the EXECUTE DEVICE DIAGNOSTIC command to reset and
- * probe the bus. Not often used these days.
- *
- * LOCKING:
- * PCI/etc. bus probe sem.
- * Obtains host_set lock.
- *
- */
-
-static unsigned int ata_bus_edd(struct ata_port *ap)
-{
- struct ata_taskfile tf;
- unsigned long flags;
-
- /* set up execute-device-diag (bus reset) taskfile */
- /* also, take interrupts to a known state (disabled) */
- DPRINTK("execute-device-diag\n");
- ata_tf_init(ap, &tf, 0);
- tf.ctl |= ATA_NIEN;
- tf.command = ATA_CMD_EDD;
- tf.protocol = ATA_PROT_NODATA;
-
- /* do bus reset */
- spin_lock_irqsave(&ap->host_set->lock, flags);
- ata_tf_to_host(ap, &tf);
- spin_unlock_irqrestore(&ap->host_set->lock, flags);
-
- /* spec says at least 2ms. but who knows with those
- * crazy ATAPI devices...
- */
- msleep(150);
-
- return ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
-}
-
static unsigned int ata_bus_softreset(struct ata_port *ap,
unsigned int devmask)
{
@@ -2078,13 +2028,12 @@ static unsigned int ata_bus_softreset(struct ata_port *ap,
*/
msleep(150);
-
/* Before we perform post reset processing we want to see if
- the bus shows 0xFF because the odd clown forgets the D7 pulldown
- resistor */
-
+ * the bus shows 0xFF because the odd clown forgets the D7
+ * pulldown resistor.
+ */
if (ata_check_status(ap) == 0xFF)
- return 1; /* Positive is failure for some reason */
+ return AC_ERR_OTHER;
ata_bus_post_reset(ap, devmask);
@@ -2116,7 +2065,7 @@ void ata_bus_reset(struct ata_port *ap)
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
u8 err;
- unsigned int dev0, dev1 = 0, rc = 0, devmask = 0;
+ unsigned int dev0, dev1 = 0, devmask = 0;
DPRINTK("ENTER, host %u, port %u\n", ap->id, ap->port_no);
@@ -2139,18 +2088,8 @@ void ata_bus_reset(struct ata_port *ap)
/* issue bus reset */
if (ap->flags & ATA_FLAG_SRST)
- rc = ata_bus_softreset(ap, devmask);
- else if ((ap->flags & ATA_FLAG_SATA_RESET) == 0) {
- /* set up device control */
- if (ap->flags & ATA_FLAG_MMIO)
- writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
- else
- outb(ap->ctl, ioaddr->ctl_addr);
- rc = ata_bus_edd(ap);
- }
-
- if (rc)
- goto err_out;
+ if (ata_bus_softreset(ap, devmask))
+ goto err_out;
/*
* determine by signature whether we have ATA or ATAPI devices
@@ -2223,9 +2162,9 @@ static int sata_phy_resume(struct ata_port *ap)
* so makes reset sequence different from the original
* ->phy_reset implementation and Jeff nervous. :-P
*/
-extern void ata_std_probeinit(struct ata_port *ap)
+void ata_std_probeinit(struct ata_port *ap)
{
- if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read) {
+ if ((ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read) {
sata_phy_resume(ap);
if (sata_dev_present(ap))
ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
@@ -2714,18 +2653,23 @@ static int ata_dma_blacklisted(const struct ata_device *dev)
* known limits including host controller limits, device
* blacklist, etc...
*
+ * FIXME: The current implementation limits all transfer modes to
+ * the fastest of the lowested device on the port. This is not
+ * required on most controllers.
+ *
* LOCKING:
* None.
*/
static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev)
{
+ struct ata_host_set *hs = ap->host_set;
unsigned long xfer_mask;
int i;
xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask,
ap->udma_mask);
- /* use port-wide xfermask for now */
+ /* FIXME: Use port-wide xfermask for now */
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *d = &ap->device[i];
if (!ata_dev_present(d))
@@ -2735,12 +2679,23 @@ static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev)
xfer_mask &= ata_id_xfermask(d->id);
if (ata_dma_blacklisted(d))
xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+ /* Apply cable rule here. Don't apply it early because when
+ we handle hot plug the cable type can itself change */
+ if (ap->cbl == ATA_CBL_PATA40)
+ xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA);
}
if (ata_dma_blacklisted(dev))
printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, "
"disabling DMA\n", ap->id, dev->devno);
+ if (hs->flags & ATA_HOST_SIMPLEX) {
+ if (hs->simplex_claimed)
+ xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+ }
+ if (ap->ops->mode_filter)
+ xfer_mask = ap->ops->mode_filter(ap, dev, xfer_mask);
+
ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask,
&dev->udma_mask);
}
@@ -2795,16 +2750,16 @@ static unsigned int ata_dev_set_xfermode(struct ata_port *ap,
*/
static unsigned int ata_dev_init_params(struct ata_port *ap,
- struct ata_device *dev)
+ struct ata_device *dev,
+ u16 heads,
+ u16 sectors)
{
struct ata_taskfile tf;
unsigned int err_mask;
- u16 sectors = dev->id[6];
- u16 heads = dev->id[3];
/* Number of sectors per track 1-255. Number of heads 1-16 */
if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16)
- return 0;
+ return AC_ERR_INVALID;
/* set up init dev params taskfile */
DPRINTK("init dev params \n");
@@ -4536,6 +4491,14 @@ static struct ata_port * ata_host_add(const struct ata_probe_ent *ent,
int rc;
DPRINTK("ENTER\n");
+
+ if (!ent->port_ops->probe_reset &&
+ !(ent->host_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) {
+ printk(KERN_ERR "ata%u: no reset mechanism available\n",
+ port_no);
+ return NULL;
+ }
+
host = scsi_host_alloc(ent->sht, sizeof(struct ata_port));
if (!host)
return NULL;
@@ -4596,6 +4559,7 @@ int ata_device_add(const struct ata_probe_ent *ent)
host_set->mmio_base = ent->mmio_base;
host_set->private_data = ent->private_data;
host_set->ops = ent->port_ops;
+ host_set->flags = ent->host_set_flags;
/* register each port bound to this device */
for (i = 0; i < ent->n_ports; i++) {
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index 275ed9bd898c..fa901fd65085 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -1010,7 +1010,7 @@ static void mv_fill_sg(struct ata_queued_cmd *qc)
pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff);
pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16);
- pp->sg_tbl[i].flags_size = cpu_to_le32(len);
+ pp->sg_tbl[i].flags_size = cpu_to_le32(len & 0xffff);
sg_len -= len;
addr += len;
@@ -1350,7 +1350,6 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
{
void __iomem *mmio = host_set->mmio_base;
void __iomem *hc_mmio = mv_hc_base(mmio, hc);
- struct ata_port *ap;
struct ata_queued_cmd *qc;
u32 hc_irq_cause;
int shift, port, port0, hard_port, handled;
@@ -1373,25 +1372,32 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) {
u8 ata_status = 0;
- ap = host_set->ports[port];
+ struct ata_port *ap = host_set->ports[port];
+ struct mv_port_priv *pp = ap->private_data;
+
hard_port = port & MV_PORT_MASK; /* range 0-3 */
handled = 0; /* ensure ata_status is set if handled++ */
- if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) {
- /* new CRPB on the queue; just one at a time until NCQ
- */
- ata_status = mv_get_crpb_status(ap);
- handled++;
- } else if ((DEV_IRQ << hard_port) & hc_irq_cause) {
- /* received ATA IRQ; read the status reg to clear INTRQ
- */
- ata_status = readb((void __iomem *)
+ /* Note that DEV_IRQ might happen spuriously during EDMA,
+ * and should be ignored in such cases. We could mask it,
+ * but it's pretty rare and may not be worth the overhead.
+ */
+ if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
+ /* EDMA: check for response queue interrupt */
+ if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) {
+ ata_status = mv_get_crpb_status(ap);
+ handled = 1;
+ }
+ } else {
+ /* PIO: check for device (drive) interrupt */
+ if ((DEV_IRQ << hard_port) & hc_irq_cause) {
+ ata_status = readb((void __iomem *)
ap->ioaddr.status_addr);
- handled++;
+ handled = 1;
+ }
}
- if (ap &&
- (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)))
+ if (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))
continue;
err_mask = ac_err_mask(ata_status);
@@ -1403,12 +1409,12 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
if ((PORT0_ERR << shift) & relevant) {
mv_err_intr(ap);
err_mask |= AC_ERR_OTHER;
- handled++;
+ handled = 1;
}
- if (handled && ap) {
+ if (handled) {
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (NULL != qc) {
+ if (qc && (qc->flags & ATA_QCFLAG_ACTIVE)) {
VPRINTK("port %u IRQ found for qc, "
"ata_status 0x%x\n", port,ata_status);
/* mark qc status appropriately */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 047192253c3a..0d61357604d5 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -160,8 +160,10 @@ enum {
ATA_QCFLAG_DMAMAP = ATA_QCFLAG_SG | ATA_QCFLAG_SINGLE,
ATA_QCFLAG_EH_SCHEDULED = (1 << 5), /* EH scheduled */
+ /* host set flags */
+ ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host_set only */
+
/* various lengths of time */
- ATA_TMOUT_EDD = 5 * HZ, /* heuristic */
ATA_TMOUT_PIO = 30 * HZ,
ATA_TMOUT_BOOT = 30 * HZ, /* heuristic */
ATA_TMOUT_BOOT_QUICK = 7 * HZ, /* heuristic */
@@ -279,6 +281,7 @@ struct ata_probe_ent {
unsigned long irq;
unsigned int irq_flags;
unsigned long host_flags;
+ unsigned long host_set_flags;
void __iomem *mmio_base;
void *private_data;
};
@@ -291,6 +294,9 @@ struct ata_host_set {
unsigned int n_ports;
void *private_data;
const struct ata_port_operations *ops;
+ unsigned long flags;
+ int simplex_claimed; /* Keep seperate in case we
+ ever need to do this locked */
struct ata_port * ports[0];
};
@@ -420,6 +426,7 @@ struct ata_port_operations {
void (*set_piomode) (struct ata_port *, struct ata_device *);
void (*set_dmamode) (struct ata_port *, struct ata_device *);
+ unsigned long (*mode_filter) (const struct ata_port *, struct ata_device *, unsigned long);
void (*tf_load) (struct ata_port *ap, const struct ata_taskfile *tf);
void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
@@ -430,6 +437,7 @@ struct ata_port_operations {
void (*dev_select)(struct ata_port *ap, unsigned int device);
void (*phy_reset) (struct ata_port *ap); /* obsolete */
+ void (*set_mode) (struct ata_port *ap);
int (*probe_reset) (struct ata_port *ap, unsigned int *classes);
void (*post_set_mode) (struct ata_port *ap);
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 18:46:00 +0000