summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arm/gic.txt6
-rw-r--r--Documentation/devicetree/bindings/arm/omap/crossbar.txt27
-rw-r--r--Documentation/devicetree/bindings/clock/arm-integrator.txt34
-rw-r--r--Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt23
-rw-r--r--Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt5
-rw-r--r--Documentation/devicetree/bindings/watchdog/marvel.txt11
-rw-r--r--arch/arm/boot/dts/integratorap.dts35
-rw-r--r--arch/arm/boot/dts/integratorcp.dts102
-rw-r--r--arch/arm/boot/dts/r8a7790.dtsi23
-rw-r--r--arch/arm/boot/dts/socfpga.dtsi38
-rw-r--r--arch/arm/boot/dts/socfpga_arria5.dtsi11
-rw-r--r--arch/arm/boot/dts/socfpga_cyclone5.dtsi11
-rw-r--r--arch/arm/boot/dts/socfpga_vt.dts11
-rw-r--r--arch/arm/common/timer-sp.c8
-rw-r--r--arch/arm/configs/socfpga_defconfig6
-rw-r--r--arch/arm/mach-davinci/aemif.c107
-rw-r--r--arch/arm/mach-davinci/board-da830-evm.c3
-rw-r--r--arch/arm/mach-davinci/board-da850-evm.c3
-rw-r--r--arch/arm/mach-davinci/board-dm644x-evm.c5
-rw-r--r--arch/arm/mach-davinci/board-dm646x-evm.c3
-rw-r--r--arch/arm/mach-davinci/board-mityomapl138.c4
-rw-r--r--arch/arm/mach-dove/include/mach/bridge-regs.h1
-rw-r--r--arch/arm/mach-exynos/pm.c148
-rw-r--r--arch/arm/mach-integrator/Kconfig3
-rw-r--r--arch/arm/mach-integrator/impd1.c81
-rw-r--r--arch/arm/mach-integrator/integrator_ap.c19
-rw-r--r--arch/arm/mach-integrator/integrator_cp.c6
-rw-r--r--arch/arm/mach-kirkwood/include/mach/bridge-regs.h1
-rw-r--r--arch/arm/mach-mv78xx0/include/mach/bridge-regs.h1
-rw-r--r--arch/arm/mach-omap2/Kconfig1
-rw-r--r--arch/arm/mach-omap2/omap-wakeupgen.c4
-rw-r--r--arch/arm/mach-omap2/omap4-common.c4
-rw-r--r--arch/arm/mach-orion5x/include/mach/bridge-regs.h1
-rw-r--r--arch/arm/mach-shmobile/clock-r7s72100.c36
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7778.c4
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7779.c20
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7790.c196
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7791.c153
-rw-r--r--arch/arm/mach-shmobile/include/mach/r8a7790.h25
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7790.c90
-rw-r--r--arch/arm/mach-sti/Kconfig3
-rw-r--r--arch/arm/mach-versatile/core.c2
-rw-r--r--arch/arm/plat-orion/common.c10
-rw-r--r--drivers/amba/tegra-ahb.c2
-rw-r--r--drivers/bus/arm-cci.c24
-rw-r--r--drivers/bus/mvebu-mbus.c3
-rw-r--r--drivers/char/hw_random/Kconfig6
-rw-r--r--drivers/clk/Kconfig1
-rw-r--r--drivers/clk/Makefile1
-rw-r--r--drivers/clk/bcm/Kconfig9
-rw-r--r--drivers/clk/bcm/Makefile3
-rw-r--r--drivers/clk/bcm/clk-bcm281xx.c416
-rw-r--r--drivers/clk/bcm/clk-kona-setup.c769
-rw-r--r--drivers/clk/bcm/clk-kona.c1033
-rw-r--r--drivers/clk/bcm/clk-kona.h410
-rw-r--r--drivers/clk/samsung/clk-exynos4.c172
-rw-r--r--drivers/clk/samsung/clk-exynos5250.c49
-rw-r--r--drivers/clk/samsung/clk-exynos5420.c49
-rw-r--r--drivers/clk/samsung/clk-exynos5440.c2
-rw-r--r--drivers/clk/samsung/clk-s3c64xx.c79
-rw-r--r--drivers/clk/samsung/clk.c71
-rw-r--r--drivers/clk/samsung/clk.h14
-rw-r--r--drivers/clk/versatile/clk-icst.c21
-rw-r--r--drivers/clk/versatile/clk-icst.h1
-rw-r--r--drivers/clk/versatile/clk-impd1.c6
-rw-r--r--drivers/clk/versatile/clk-integrator.c83
-rw-r--r--drivers/clk/versatile/clk-realview.c4
-rw-r--r--drivers/cpufreq/Kconfig.arm2
-rw-r--r--drivers/cpuidle/Kconfig.arm2
-rw-r--r--drivers/gpio/Kconfig2
-rw-r--r--drivers/gpu/drm/msm/Kconfig2
-rw-r--r--drivers/irqchip/Kconfig8
-rw-r--r--drivers/irqchip/Makefile1
-rw-r--r--drivers/irqchip/irq-crossbar.c208
-rw-r--r--drivers/irqchip/irq-gic.c82
-rw-r--r--drivers/irqchip/irq-vic.c60
-rw-r--r--drivers/leds/Kconfig4
-rw-r--r--drivers/mtd/nand/davinci_nand.c22
-rw-r--r--drivers/phy/Kconfig2
-rw-r--r--drivers/power/reset/Kconfig2
-rw-r--r--drivers/power/reset/qnap-poweroff.c49
-rw-r--r--drivers/reset/Kconfig2
-rw-r--r--drivers/reset/Makefile1
-rw-r--r--drivers/reset/core.c71
-rw-r--r--drivers/reset/sti/Kconfig15
-rw-r--r--drivers/reset/sti/Makefile4
-rw-r--r--drivers/reset/sti/reset-stih415.c112
-rw-r--r--drivers/reset/sti/reset-stih416.c143
-rw-r--r--drivers/reset/sti/reset-syscfg.c186
-rw-r--r--drivers/reset/sti/reset-syscfg.h69
-rw-r--r--drivers/rtc/rtc-isl12057.c5
-rw-r--r--drivers/rtc/rtc-mv.c12
-rw-r--r--drivers/sh/clk/cpg.c38
-rw-r--r--drivers/thermal/Kconfig2
-rw-r--r--drivers/tty/serial/Kconfig2
-rw-r--r--drivers/watchdog/Kconfig2
-rw-r--r--drivers/watchdog/orion_wdt.c381
-rw-r--r--include/dt-bindings/clock/bcm281xx.h65
-rw-r--r--include/dt-bindings/clock/r8a7790-clock.h4
-rw-r--r--include/linux/irqchip/arm-gic.h7
-rw-r--r--include/linux/irqchip/arm-vic.h6
-rw-r--r--include/linux/irqchip/irq-crossbar.h11
-rw-r--r--include/linux/platform_data/clk-integrator.h1
-rw-r--r--include/linux/platform_data/mtd-davinci-aemif.h5
-rw-r--r--include/linux/reset.h65
-rw-r--r--include/linux/sh_clk.h19
-rw-r--r--sound/soc/kirkwood/Kconfig2
107 files changed, 5490 insertions, 699 deletions
diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
index bae0d87a38b2..5573c08d3180 100644
--- a/Documentation/devicetree/bindings/arm/gic.txt
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -50,6 +50,11 @@ Optional
regions, used when the GIC doesn't have banked registers. The offset is
cpu-offset * cpu-nr.
+- arm,routable-irqs : Total number of gic irq inputs which are not directly
+ connected from the peripherals, but are routed dynamically
+ by a crossbar/multiplexer preceding the GIC. The GIC irq
+ input line is assigned dynamically when the corresponding
+ peripheral's crossbar line is mapped.
Example:
intc: interrupt-controller@fff11000 {
@@ -57,6 +62,7 @@ Example:
#interrupt-cells = <3>;
#address-cells = <1>;
interrupt-controller;
+ arm,routable-irqs = <160>;
reg = <0xfff11000 0x1000>,
<0xfff10100 0x100>;
};
diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
new file mode 100644
index 000000000000..fb88585cfb93
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
@@ -0,0 +1,27 @@
+Some socs have a large number of interrupts requests to service
+the needs of its many peripherals and subsystems. All of the
+interrupt lines from the subsystems are not needed at the same
+time, so they have to be muxed to the irq-controller appropriately.
+In such places a interrupt controllers are preceded by an CROSSBAR
+that provides flexibility in muxing the device requests to the controller
+inputs.
+
+Required properties:
+- compatible : Should be "ti,irq-crossbar"
+- reg: Base address and the size of the crossbar registers.
+- ti,max-irqs: Total number of irqs available at the interrupt controller.
+- ti,reg-size: Size of a individual register in bytes. Every individual
+ register is assumed to be of same size. Valid sizes are 1, 2, 4.
+- ti,irqs-reserved: List of the reserved irq lines that are not muxed using
+ crossbar. These interrupt lines are reserved in the soc,
+ so crossbar bar driver should not consider them as free
+ lines.
+
+Examples:
+ crossbar_mpu: @4a020000 {
+ compatible = "ti,irq-crossbar";
+ reg = <0x4a002a48 0x130>;
+ ti,max-irqs = <160>;
+ ti,reg-size = <2>;
+ ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/arm-integrator.txt b/Documentation/devicetree/bindings/clock/arm-integrator.txt
new file mode 100644
index 000000000000..652914b17b95
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/arm-integrator.txt
@@ -0,0 +1,34 @@
+Clock bindings for ARM Integrator Core Module clocks
+
+Auxilary Oscillator Clock
+
+This is a configurable clock fed from a 24 MHz chrystal,
+used for generating e.g. video clocks. It is located on the
+core module and there is only one of these.
+
+This clock node *must* be a subnode of the core module, since
+it obtains the base address for it's address range from its
+parent node.
+
+
+Required properties:
+- compatible: must be "arm,integrator-cm-auxosc"
+- #clock-cells: must be <0>
+
+Optional properties:
+- clocks: parent clock(s)
+
+Example:
+
+core-module@10000000 {
+ xtal24mhz: xtal24mhz@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ auxosc: cm_aux_osc@25M {
+ #clock-cells = <0>;
+ compatible = "arm,integrator-cm-auxosc";
+ clocks = <&xtal24mhz>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt
new file mode 100644
index 000000000000..4897bea7e3f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt
@@ -0,0 +1,23 @@
+* Altera SOCFPGA specific extensions to the Synopsys Designware Mobile
+ Storage Host Controller
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Altera SOCFPGA specific
+extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be
+ - "altr,socfpga-dw-mshc": for Altera's SOCFPGA platform
+
+Example:
+
+ mmc: dwmmc0@ff704000 {
+ compatible = "altr,socfpga-dw-mshc";
+ reg = <0xff704000 0x1000>;
+ interrupts = <0 129 4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
index 0347d8350d94..af25e77c0e0c 100644
--- a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
+++ b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
@@ -6,8 +6,11 @@ Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
microcontroller to turn the power off. This driver adds a handler to
pm_power_off which is called to turn the power off.
+Synology NAS devices use a similar scheme, but a different baud rate,
+9600, and a different character, '1'.
+
Required Properties:
-- compatible: Should be "qnap,power-off"
+- compatible: Should be "qnap,power-off" or "synology,power-off"
- reg: Address and length of the register set for UART1
- clocks: tclk clock
diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt
index 5dc8d30061ce..de11eb4c121f 100644
--- a/Documentation/devicetree/bindings/watchdog/marvel.txt
+++ b/Documentation/devicetree/bindings/watchdog/marvel.txt
@@ -3,17 +3,24 @@
Required Properties:
- Compatibility : "marvell,orion-wdt"
-- reg : Address of the timer registers
+ "marvell,armada-370-wdt"
+ "marvell,armada-xp-wdt"
+
+- reg : Should contain two entries: first one with the
+ timer control address, second one with the
+ rstout enable address.
Optional properties:
+- interrupts : Contains the IRQ for watchdog expiration
- timeout-sec : Contains the watchdog timeout in seconds
Example:
wdt@20300 {
compatible = "marvell,orion-wdt";
- reg = <0x20300 0x28>;
+ reg = <0x20300 0x28>, <0x20108 0x4>;
+ interrupts = <3>;
timeout-sec = <10>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
index e6be9315ff0a..b10e6351da53 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -18,6 +18,28 @@
bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk";
};
+ /* 24 MHz chrystal on the core module */
+ xtal24mhz: xtal24mhz@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ pclk: pclk@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ /* The UART clock is 14.74 MHz divided by an ICS525 */
+ uartclk: uartclk@14.74M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <14745600>;
+ };
+
syscon {
compatible = "arm,integrator-ap-syscon";
reg = <0x11000000 0x100>;
@@ -28,14 +50,17 @@
timer0: timer@13000000 {
compatible = "arm,integrator-timer";
+ clocks = <&xtal24mhz>;
};
timer1: timer@13000100 {
compatible = "arm,integrator-timer";
+ clocks = <&xtal24mhz>;
};
timer2: timer@13000200 {
compatible = "arm,integrator-timer";
+ clocks = <&xtal24mhz>;
};
pic: pic@14000000 {
@@ -92,26 +117,36 @@
rtc: rtc@15000000 {
compatible = "arm,pl030", "arm,primecell";
arm,primecell-periphid = <0x00041030>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
uart0: uart@16000000 {
compatible = "arm,pl010", "arm,primecell";
arm,primecell-periphid = <0x00041010>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
};
uart1: uart@17000000 {
compatible = "arm,pl010", "arm,primecell";
arm,primecell-periphid = <0x00041010>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
};
kmi0: kmi@18000000 {
compatible = "arm,pl050", "arm,primecell";
arm,primecell-periphid = <0x00041050>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
};
kmi1: kmi@19000000 {
compatible = "arm,pl050", "arm,primecell";
arm,primecell-periphid = <0x00041050>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
};
};
};
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts
index a21c17de9a5e..d43f15b4f79a 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/integratorcp.dts
@@ -13,25 +13,107 @@
bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
};
+ /*
+ * The Integrator/CP overall clocking architecture can be found in
+ * ARM DUI 0184B page 7-28 "Integrator/CP922T system clocks" which
+ * appear to illustrate the layout used in most configurations.
+ */
+
+ /* The codec chrystal operates at 24.576 MHz */
+ xtal_codec: xtal24.576@24.576M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24576000>;
+ };
+
+ /* The chrystal is divided by 2 by the codec for the AACI bit clock */
+ aaci_bitclk: aaci_bitclk@12.288M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <2>;
+ clock-mult = <1>;
+ clocks = <&xtal_codec>;
+ };
+
+ /* This is a 25MHz chrystal on the base board */
+ xtal25mhz: xtal25mhz@25M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ /* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
+ uartclk: uartclk@14.74M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <14745600>;
+ };
+
+ /* Actually sysclk I think */
+ pclk: pclk@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ core-module@10000000 {
+ /* 24 MHz chrystal on the core module */
+ xtal24mhz: xtal24mhz@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ /*
+ * External oscillator on the core module, usually used
+ * to drive video circuitry. Driven from the 24MHz clock.
+ */
+ auxosc: cm_aux_osc@25M {
+ #clock-cells = <0>;
+ compatible = "arm,integrator-cm-auxosc";
+ clocks = <&xtal24mhz>;
+ };
+
+ /* The KMI clock is the 24 MHz oscillator divided to 8MHz */
+ kmiclk: kmiclk@1M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <3>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ /* The timer clock is the 24 MHz oscillator divided to 1MHz */
+ timclk: timclk@1M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <24>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+ };
+
syscon {
compatible = "arm,integrator-cp-syscon";
reg = <0xcb000000 0x100>;
};
timer0: timer@13000000 {
- /* TIMER0 runs @ 25MHz */
+ /* TIMER0 runs directly on the 25MHz chrystal */
compatible = "arm,integrator-cp-timer";
- status = "disabled";
+ clocks = <&xtal25mhz>;
};
timer1: timer@13000100 {
/* TIMER1 runs @ 1MHz */
compatible = "arm,integrator-cp-timer";
+ clocks = <&timclk>;
};
timer2: timer@13000200 {
/* TIMER2 runs @ 1MHz */
compatible = "arm,integrator-cp-timer";
+ clocks = <&timclk>;
};
pic: pic@14000000 {
@@ -74,22 +156,32 @@
*/
rtc@15000000 {
compatible = "arm,pl031", "arm,primecell";
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
uart@16000000 {
compatible = "arm,pl011", "arm,primecell";
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
};
uart@17000000 {
compatible = "arm,pl011", "arm,primecell";
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
};
kmi@18000000 {
compatible = "arm,pl050", "arm,primecell";
+ clocks = <&kmiclk>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
};
kmi@19000000 {
compatible = "arm,pl050", "arm,primecell";
+ clocks = <&kmiclk>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
};
/*
@@ -100,18 +192,24 @@
reg = <0x1c000000 0x1000>;
interrupts = <23 24>;
max-frequency = <515633>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "mclk", "apb_pclk";
};
aaci@1d000000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x1d000000 0x1000>;
interrupts = <25>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
clcd@c0000000 {
compatible = "arm,pl110", "arm,primecell";
reg = <0xC0000000 0x1000>;
interrupts = <22>;
+ clocks = <&auxosc>, <&pclk>;
+ clock-names = "clcd", "apb_pclk";
};
};
};
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index e22520dff8c6..618e5b537eaf 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -421,6 +421,29 @@
clock-output-names = "extal";
};
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency clocks by
+ * default. Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "audio_clk_a";
+ };
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "audio_clk_b";
+ };
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "audio_clk_c";
+ };
+
/* Special CPG clocks */
cpg_clocks: cpg_clocks@e6150000 {
compatible = "renesas,r8a7790-cpg-clocks",
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index ba51d69abbea..4568c9869d44 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -92,7 +92,12 @@
#address-cells = <1>;
#size-cells = <0>;
- osc: osc1 {
+ osc1: osc1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ osc2: osc2 {
#clock-cells = <0>;
compatible = "fixed-clock";
};
@@ -100,7 +105,11 @@
f2s_periph_ref_clk: f2s_periph_ref_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
- clock-frequency = <10000000>;
+ };
+
+ f2s_sdram_ref_clk: f2s_sdram_ref_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
};
main_pll: main_pll {
@@ -108,7 +117,7 @@
#size-cells = <0>;
#clock-cells = <0>;
compatible = "altr,socfpga-pll-clock";
- clocks = <&osc>;
+ clocks = <&osc1>;
reg = <0x40>;
mpuclk: mpuclk {
@@ -162,7 +171,7 @@
#size-cells = <0>;
#clock-cells = <0>;
compatible = "altr,socfpga-pll-clock";
- clocks = <&osc>;
+ clocks = <&osc1>, <&osc2>, <&f2s_periph_ref_clk>;
reg = <0x80>;
emac0_clk: emac0_clk {
@@ -213,7 +222,7 @@
#size-cells = <0>;
#clock-cells = <0>;
compatible = "altr,socfpga-pll-clock";
- clocks = <&osc>;
+ clocks = <&osc1>, <&osc2>, <&f2s_sdram_ref_clk>;
reg = <0xC0>;
ddr_dqs_clk: ddr_dqs_clk {
@@ -475,6 +484,17 @@
arm,data-latency = <2 1 1>;
};
+ mmc: dwmmc0@ff704000 {
+ compatible = "altr,socfpga-dw-mshc";
+ reg = <0xff704000 0x1000>;
+ interrupts = <0 139 4>;
+ fifo-depth = <0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&l4_mp_clk>, <&sdmmc_clk>;
+ clock-names = "biu", "ciu";
+ };
+
/* Local timer */
timer@fffec600 {
compatible = "arm,cortex-a9-twd-timer";
@@ -528,9 +548,9 @@
reg = <0xffd05000 0x1000>;
};
- sysmgr@ffd08000 {
- compatible = "altr,sys-mgr";
- reg = <0xffd08000 0x4000>;
- };
+ sysmgr: sysmgr@ffd08000 {
+ compatible = "altr,sys-mgr", "syscon";
+ reg = <0xffd08000 0x4000>;
+ };
};
};
diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi
index a85b4043f888..6c87b7070ca7 100644
--- a/arch/arm/boot/dts/socfpga_arria5.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria5.dtsi
@@ -27,6 +27,17 @@
};
};
+ dwmmc0@ff704000 {
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+ };
+
serial0@ffc02000 {
clock-frequency = <100000000>;
};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
index a8716f6dbe2e..ca41b0ebf461 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi
+++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
@@ -28,6 +28,17 @@
};
};
+ dwmmc0@ff704000 {
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+ };
+
ethernet@ff702000 {
phy-mode = "rgmii";
phy-addr = <0xffffffff>; /* probe for phy addr */
diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts
index dde2c66c50eb..87d6f759a9c1 100644
--- a/arch/arm/boot/dts/socfpga_vt.dts
+++ b/arch/arm/boot/dts/socfpga_vt.dts
@@ -41,6 +41,17 @@
};
};
+ dwmmc0@ff704000 {
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+ };
+
ethernet@ff700000 {
phy-mode = "gmii";
status = "okay";
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index 53c6a26b633d..fd6bff0c5b96 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -271,10 +271,14 @@ static void __init integrator_cp_of_init(struct device_node *np)
void __iomem *base;
int irq;
const char *name = of_get_property(np, "compatible", NULL);
+ struct clk *clk;
base = of_iomap(np, 0);
if (WARN_ON(!base))
return;
+ clk = of_clk_get(np, 0);
+ if (WARN_ON(IS_ERR(clk)))
+ return;
/* Ensure timer is disabled */
writel(0, base + TIMER_CTRL);
@@ -283,13 +287,13 @@ static void __init integrator_cp_of_init(struct device_node *np)
goto err;
if (!init_count)
- sp804_clocksource_init(base, name);
+ __sp804_clocksource_and_sched_clock_init(base, name, clk, 0);
else {
irq = irq_of_parse_and_map(np, 0);
if (irq <= 0)
goto err;
- sp804_clockevents_init(base, irq, name);
+ __sp804_clockevents_init(base, irq, clk, name);
}
init_count++;
diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig
index 4e1ce211d43f..e3a05e8801d8 100644
--- a/arch/arm/configs/socfpga_defconfig
+++ b/arch/arm/configs/socfpga_defconfig
@@ -52,6 +52,7 @@ CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_STMMAC_ETH=y
+CONFIG_MICREL_PHY=y
# CONFIG_STMMAC_PHY_ID_ZERO_WORKAROUND is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_SERIO_SERPORT is not set
@@ -66,6 +67,9 @@ CONFIG_SERIAL_8250_DW=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT3_FS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
CONFIG_VFAT_FS=y
@@ -82,3 +86,5 @@ CONFIG_DEBUG_INFO=y
CONFIG_ENABLE_DEFAULT_TRACERS=y
CONFIG_DEBUG_USER=y
CONFIG_XZ_DEC=y
+CONFIG_MMC=y
+CONFIG_MMC_DW=y
diff --git a/arch/arm/mach-davinci/aemif.c b/arch/arm/mach-davinci/aemif.c
index f091a9010c2f..ff8b7e76b6e9 100644
--- a/arch/arm/mach-davinci/aemif.c
+++ b/arch/arm/mach-davinci/aemif.c
@@ -16,6 +16,7 @@
#include <linux/time.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/mtd-davinci.h>
/* Timing value configuration */
@@ -43,6 +44,17 @@
WSTROBE(WSTROBE_MAX) | \
WSETUP(WSETUP_MAX))
+static inline unsigned int davinci_aemif_readl(void __iomem *base, int offset)
+{
+ return readl_relaxed(base + offset);
+}
+
+static inline void davinci_aemif_writel(void __iomem *base,
+ int offset, unsigned long value)
+{
+ writel_relaxed(value, base + offset);
+}
+
/*
* aemif_calc_rate - calculate timing data.
* @wanted: The cycle time needed in nanoseconds.
@@ -76,6 +88,7 @@ static int aemif_calc_rate(int wanted, unsigned long clk, int max)
* @t: timing values to be progammed
* @base: The virtual base address of the AEMIF interface
* @cs: chip-select to program the timing values for
+ * @clkrate: the AEMIF clkrate
*
* This function programs the given timing values (in real clock) into the
* AEMIF registers taking the AEMIF clock into account.
@@ -86,24 +99,17 @@ static int aemif_calc_rate(int wanted, unsigned long clk, int max)
*
* Returns 0 on success, else negative errno.
*/
-int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
- void __iomem *base, unsigned cs)
+static int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
+ void __iomem *base, unsigned cs,
+ unsigned long clkrate)
{
unsigned set, val;
int ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup;
unsigned offset = A1CR_OFFSET + cs * 4;
- struct clk *aemif_clk;
- unsigned long clkrate;
if (!t)
return 0; /* Nothing to do */
- aemif_clk = clk_get(NULL, "aemif");
- if (IS_ERR(aemif_clk))
- return PTR_ERR(aemif_clk);
-
- clkrate = clk_get_rate(aemif_clk);
-
clkrate /= 1000; /* turn clock into kHz for ease of use */
ta = aemif_calc_rate(t->ta, clkrate, TA_MAX);
@@ -130,4 +136,83 @@ int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
return 0;
}
-EXPORT_SYMBOL(davinci_aemif_setup_timing);
+
+/**
+ * davinci_aemif_setup - setup AEMIF interface by davinci_nand_pdata
+ * @pdev - link to platform device to setup settings for
+ *
+ * This function does not use any locking while programming the AEMIF
+ * because it is expected that there is only one user of a given
+ * chip-select.
+ *
+ * Returns 0 on success, else negative errno.
+ */
+int davinci_aemif_setup(struct platform_device *pdev)
+{
+ struct davinci_nand_pdata *pdata = dev_get_platdata(&pdev->dev);
+ uint32_t val;
+ unsigned long clkrate;
+ struct resource *res;
+ void __iomem *base;
+ struct clk *clk;
+ int ret = 0;
+
+ clk = clk_get(&pdev->dev, "aemif");
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret < 0) {
+ dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
+ ret);
+ goto err_put;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res) {
+ dev_err(&pdev->dev, "cannot get IORESOURCE_MEM\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ base = ioremap(res->start, resource_size(res));
+ if (!base) {
+ dev_err(&pdev->dev, "ioremap failed for resource %pR\n", res);
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ /*
+ * Setup Async configuration register in case we did not boot
+ * from NAND and so bootloader did not bother to set it up.
+ */
+ val = davinci_aemif_readl(base, A1CR_OFFSET + pdev->id * 4);
+ /*
+ * Extended Wait is not valid and Select Strobe mode is not
+ * used
+ */
+ val &= ~(ACR_ASIZE_MASK | ACR_EW_MASK | ACR_SS_MASK);
+ if (pdata->options & NAND_BUSWIDTH_16)
+ val |= 0x1;
+
+ davinci_aemif_writel(base, A1CR_OFFSET + pdev->id * 4, val);
+
+ clkrate = clk_get_rate(clk);
+
+ if (pdata->timing)
+ ret = davinci_aemif_setup_timing(pdata->timing, base, pdev->id,
+ clkrate);
+
+ if (ret < 0)
+ dev_dbg(&pdev->dev, "NAND timing values setup fail\n");
+
+ iounmap(base);
+err:
+ clk_disable_unprepare(clk);
+err_put:
+ clk_put(clk);
+ return ret;
+}
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index d1f45af7a530..5623131c4f0b 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -419,6 +419,9 @@ static inline void da830_evm_init_nand(int mux_mode)
if (ret)
pr_warning("da830_evm_init: NAND device not registered.\n");
+ if (davinci_aemif_setup(&da830_evm_nand_device))
+ pr_warn("%s: Cannot configure AEMIF.\n", __func__);
+
gpio_direction_output(mux_mode, 1);
}
#else
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index e0af0eccde8f..234c5bb091f5 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -358,6 +358,9 @@ static inline void da850_evm_setup_nor_nand(void)
platform_add_devices(da850_evm_devices,
ARRAY_SIZE(da850_evm_devices));
+
+ if (davinci_aemif_setup(&da850_evm_nandflash_device))
+ pr_warn("%s: Cannot configure AEMIF.\n", __func__);
}
}
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 3de4dc9a1698..e583e58b5e1e 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -778,6 +778,11 @@ static __init void davinci_evm_init(void)
/* only one device will be jumpered and detected */
if (HAS_NAND) {
platform_device_register(&davinci_evm_nandflash_device);
+
+ if (davinci_aemif_setup(&davinci_evm_nandflash_device))
+ pr_warn("%s: Cannot configure AEMIF.\n",
+ __func__);
+
evm_leds[7].default_trigger = "nand-disk";
if (HAS_NOR)
pr_warning("WARNING: both NAND and NOR flash "
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 13d0801fd6b1..ae129bc49273 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -805,6 +805,9 @@ static __init void evm_init(void)
platform_device_register(&davinci_nand_device);
+ if (davinci_aemif_setup(&davinci_nand_device))
+ pr_warn("%s: Cannot configure AEMIF.\n", __func__);
+
dm646x_init_edma(dm646x_edma_rsv);
if (HAS_ATA)
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 7aa105b1fd0f..96fc00a167f5 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -27,6 +27,7 @@
#include <mach/cp_intc.h>
#include <mach/da8xx.h>
#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
#include <mach/mux.h>
#include <linux/platform_data/spi-davinci.h>
@@ -432,6 +433,9 @@ static void __init mityomapl138_setup_nand(void)
{
platform_add_devices(mityomapl138_devices,
ARRAY_SIZE(mityomapl138_devices));
+
+ if (davinci_aemif_setup(&mityomapl138_nandflash_device))
+ pr_warn("%s: Cannot configure AEMIF.\n", __func__);
}
static const short mityomap_mii_pins[] = {
diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h
index 5362df3df89f..f4a5b34489b7 100644
--- a/arch/arm/mach-dove/include/mach/bridge-regs.h
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@@ -21,6 +21,7 @@
#define CPU_CTRL_PCIE1_LINK 0x00000008
#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
+#define RSTOUTn_MASK_PHYS (BRIDGE_PHYS_BASE + 0x0108)
#define SOFT_RESET_OUT_EN 0x00000004
#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index e00025bbbe89..ba18214c9aca 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -35,56 +35,6 @@
#include "common.h"
#include "regs-pmu.h"
-#define EXYNOS4_EPLL_LOCK (S5P_VA_CMU + 0x0C010)
-#define EXYNOS4_VPLL_LOCK (S5P_VA_CMU + 0x0C020)
-
-#define EXYNOS4_EPLL_CON0 (S5P_VA_CMU + 0x0C110)
-#define EXYNOS4_EPLL_CON1 (S5P_VA_CMU + 0x0C114)
-#define EXYNOS4_VPLL_CON0 (S5P_VA_CMU + 0x0C120)
-#define EXYNOS4_VPLL_CON1 (S5P_VA_CMU + 0x0C124)
-
-#define EXYNOS4_CLKSRC_MASK_TOP (S5P_VA_CMU + 0x0C310)
-#define EXYNOS4_CLKSRC_MASK_CAM (S5P_VA_CMU + 0x0C320)
-#define EXYNOS4_CLKSRC_MASK_TV (S5P_VA_CMU + 0x0C324)
-#define EXYNOS4_CLKSRC_MASK_LCD0 (S5P_VA_CMU + 0x0C334)
-#define EXYNOS4_CLKSRC_MASK_MAUDIO (S5P_VA_CMU + 0x0C33C)
-#define EXYNOS4_CLKSRC_MASK_FSYS (S5P_VA_CMU + 0x0C340)
-#define EXYNOS4_CLKSRC_MASK_PERIL0 (S5P_VA_CMU + 0x0C350)
-#define EXYNOS4_CLKSRC_MASK_PERIL1 (S5P_VA_CMU + 0x0C354)
-
-#define EXYNOS4_CLKSRC_MASK_DMC (S5P_VA_CMU + 0x10300)
-
-#define EXYNOS4_EPLLCON0_LOCKED_SHIFT (29)
-#define EXYNOS4_VPLLCON0_LOCKED_SHIFT (29)
-
-#define EXYNOS4210_CLKSRC_MASK_LCD1 (S5P_VA_CMU + 0x0C338)
-
-static const struct sleep_save exynos4_set_clksrc[] = {
- { .reg = EXYNOS4_CLKSRC_MASK_TOP , .val = 0x00000001, },
- { .reg = EXYNOS4_CLKSRC_MASK_CAM , .val = 0x11111111, },
- { .reg = EXYNOS4_CLKSRC_MASK_TV , .val = 0x00000111, },
- { .reg = EXYNOS4_CLKSRC_MASK_LCD0 , .val = 0x00001111, },
- { .reg = EXYNOS4_CLKSRC_MASK_MAUDIO , .val = 0x00000001, },
- { .reg = EXYNOS4_CLKSRC_MASK_FSYS , .val = 0x01011111, },
- { .reg = EXYNOS4_CLKSRC_MASK_PERIL0 , .val = 0x01111111, },
- { .reg = EXYNOS4_CLKSRC_MASK_PERIL1 , .val = 0x01110111, },
- { .reg = EXYNOS4_CLKSRC_MASK_DMC , .val = 0x00010000, },
-};
-
-static const struct sleep_save exynos4210_set_clksrc[] = {
- { .reg = EXYNOS4210_CLKSRC_MASK_LCD1 , .val = 0x00001111, },
-};
-
-static struct sleep_save exynos4_epll_save[] = {
- SAVE_ITEM(EXYNOS4_EPLL_CON0),
- SAVE_ITEM(EXYNOS4_EPLL_CON1),
-};
-
-static struct sleep_save exynos4_vpll_save[] = {
- SAVE_ITEM(EXYNOS4_VPLL_CON0),
- SAVE_ITEM(EXYNOS4_VPLL_CON1),
-};
-
static struct sleep_save exynos5_sys_save[] = {
SAVE_ITEM(EXYNOS5_SYS_I2C_CFG),
};
@@ -124,10 +74,7 @@ static void exynos_pm_prepare(void)
s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
- if (!soc_is_exynos5250()) {
- s3c_pm_do_save(exynos4_epll_save, ARRAY_SIZE(exynos4_epll_save));
- s3c_pm_do_save(exynos4_vpll_save, ARRAY_SIZE(exynos4_vpll_save));
- } else {
+ if (soc_is_exynos5250()) {
s3c_pm_do_save(exynos5_sys_save, ARRAY_SIZE(exynos5_sys_save));
/* Disable USE_RETENTION of JPEG_MEM_OPTION */
tmp = __raw_readl(EXYNOS5_JPEG_MEM_OPTION);
@@ -143,15 +90,6 @@ static void exynos_pm_prepare(void)
/* ensure at least INFORM0 has the resume address */
__raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0);
-
- /* Before enter central sequence mode, clock src register have to set */
-
- if (!soc_is_exynos5250())
- s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc));
-
- if (soc_is_exynos4210())
- s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc));
-
}
static int exynos_pm_add(struct device *dev, struct subsys_interface *sif)
@@ -162,73 +100,6 @@ static int exynos_pm_add(struct device *dev, struct subsys_interface *sif)
return 0;
}
-static unsigned long pll_base_rate;
-
-static void exynos4_restore_pll(void)
-{
- unsigned long pll_con, locktime, lockcnt;
- unsigned long pll_in_rate;
- unsigned int p_div, epll_wait = 0, vpll_wait = 0;
-
- if (pll_base_rate == 0)
- return;
-
- pll_in_rate = pll_base_rate;
-
- /* EPLL */
- pll_con = exynos4_epll_save[0].val;
-
- if (pll_con & (1 << 31)) {
- pll_con &= (PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT);
- p_div = (pll_con >> PLL46XX_PDIV_SHIFT);
-
- pll_in_rate /= 1000000;
-
- locktime = (3000 / pll_in_rate) * p_div;
- lockcnt = locktime * 10000 / (10000 / pll_in_rate);
-
- __raw_writel(lockcnt, EXYNOS4_EPLL_LOCK);
-
- s3c_pm_do_restore_core(exynos4_epll_save,
- ARRAY_SIZE(exynos4_epll_save));
- epll_wait = 1;
- }
-
- pll_in_rate = pll_base_rate;
-
- /* VPLL */
- pll_con = exynos4_vpll_save[0].val;
-
- if (pll_con & (1 << 31)) {
- pll_in_rate /= 1000000;
- /* 750us */
- locktime = 750;
- lockcnt = locktime * 10000 / (10000 / pll_in_rate);
-
- __raw_writel(lockcnt, EXYNOS4_VPLL_LOCK);
-
- s3c_pm_do_restore_core(exynos4_vpll_save,
- ARRAY_SIZE(exynos4_vpll_save));
- vpll_wait = 1;
- }
-
- /* Wait PLL locking */
-
- do {
- if (epll_wait) {
- pll_con = __raw_readl(EXYNOS4_EPLL_CON0);
- if (pll_con & (1 << EXYNOS4_EPLLCON0_LOCKED_SHIFT))
- epll_wait = 0;
- }
-
- if (vpll_wait) {
- pll_con = __raw_readl(EXYNOS4_VPLL_CON0);
- if (pll_con & (1 << EXYNOS4_VPLLCON0_LOCKED_SHIFT))
- vpll_wait = 0;
- }
- } while (epll_wait || vpll_wait);
-}
-
static struct subsys_interface exynos_pm_interface = {
.name = "exynos_pm",
.subsys = &exynos_subsys,
@@ -237,7 +108,6 @@ static struct subsys_interface exynos_pm_interface = {
static __init int exynos_pm_drvinit(void)
{
- struct clk *pll_base;
unsigned int tmp;
if (soc_is_exynos5440())
@@ -251,15 +121,6 @@ static __init int exynos_pm_drvinit(void)
tmp |= ((0xFF << 8) | (0x1F << 1));
__raw_writel(tmp, S5P_WAKEUP_MASK);
- if (!soc_is_exynos5250()) {
- pll_base = clk_get(NULL, "xtal");
-
- if (!IS_ERR(pll_base)) {
- pll_base_rate = clk_get_rate(pll_base);
- clk_put(pll_base);
- }
- }
-
return subsys_interface_register(&exynos_pm_interface);
}
arch_initcall(exynos_pm_drvinit);
@@ -343,13 +204,8 @@ static void exynos_pm_resume(void)
s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
- if (!soc_is_exynos5250()) {
- exynos4_restore_pll();
-
-#ifdef CONFIG_SMP
+ if (IS_ENABLED(CONFIG_SMP) && !soc_is_exynos5250())
scu_enable(S5P_VA_SCU);
-#endif
- }
early_wakeup:
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index 271a255864d2..ba43321001d8 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -30,6 +30,9 @@ config ARCH_CINTEGRATOR
config INTEGRATOR_IMPD1
tristate "Include support for Integrator/IM-PD1"
depends on ARCH_INTEGRATOR_AP
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_VIC
+ select GPIO_PL061 if GPIOLIB
help
The IM-PD1 is an add-on logic module for the Integrator which
allows ARM(R) Ltd PrimeCells to be developed and evaluated.
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 9f82f9dcbb98..d9b784824808 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -23,6 +23,7 @@
#include <linux/io.h>
#include <linux/platform_data/clk-integrator.h>
#include <linux/slab.h>
+#include <linux/irqchip/arm-vic.h>
#include <mach/lm.h>
#include <mach/impd1.h>
@@ -35,6 +36,7 @@ MODULE_PARM_DESC(lmid, "logic module stack position");
struct impd1_module {
void __iomem *base;
+ void __iomem *vic_base;
};
void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
@@ -262,9 +264,6 @@ struct impd1_device {
static struct impd1_device impd1_devs[] = {
{
- .offset = 0x03000000,
- .id = 0x00041190,
- }, {
.offset = 0x00100000,
.irq = { 1 },
.id = 0x00141011,
@@ -304,46 +303,72 @@ static struct impd1_device impd1_devs[] = {
}
};
-static int impd1_probe(struct lm_device *dev)
+/*
+ * Valid IRQs: 0 thru 9 and 11, 10 unused.
+ */
+#define IMPD1_VALID_IRQS 0x00000bffU
+
+static int __init impd1_probe(struct lm_device *dev)
{
struct impd1_module *impd1;
- int i, ret;
+ int irq_base;
+ int i;
if (dev->id != module_id)
return -EINVAL;
- if (!request_mem_region(dev->resource.start, SZ_4K, "LM registers"))
+ if (!devm_request_mem_region(&dev->dev, dev->resource.start,
+ SZ_4K, "LM registers"))
return -EBUSY;
- impd1 = kzalloc(sizeof(struct impd1_module), GFP_KERNEL);
- if (!impd1) {
- ret = -ENOMEM;
- goto release_lm;
- }
+ impd1 = devm_kzalloc(&dev->dev, sizeof(struct impd1_module),
+ GFP_KERNEL);
+ if (!impd1)
+ return -ENOMEM;
- impd1->base = ioremap(dev->resource.start, SZ_4K);
- if (!impd1->base) {
- ret = -ENOMEM;
- goto free_impd1;
- }
+ impd1->base = devm_ioremap(&dev->dev, dev->resource.start, SZ_4K);
+ if (!impd1->base)
+ return -ENOMEM;
- lm_set_drvdata(dev, impd1);
+ integrator_impd1_clk_init(impd1->base, dev->id);
- printk("IM-PD1 found at 0x%08lx\n",
- (unsigned long)dev->resource.start);
+ if (!devm_request_mem_region(&dev->dev,
+ dev->resource.start + 0x03000000,
+ SZ_4K, "VIC"))
+ return -EBUSY;
- integrator_impd1_clk_init(impd1->base, dev->id);
+ impd1->vic_base = devm_ioremap(&dev->dev,
+ dev->resource.start + 0x03000000,
+ SZ_4K);
+ if (!impd1->vic_base)
+ return -ENOMEM;
+
+ irq_base = vic_init_cascaded(impd1->vic_base, dev->irq,
+ IMPD1_VALID_IRQS, 0);
+
+ lm_set_drvdata(dev, impd1);
+
+ dev_info(&dev->dev, "IM-PD1 found at 0x%08lx\n",
+ (unsigned long)dev->resource.start);
for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) {
struct impd1_device *idev = impd1_devs + i;
struct amba_device *d;
unsigned long pc_base;
char devname[32];
+ int irq1 = idev->irq[0];
+ int irq2 = idev->irq[1];
+
+ /* Translate IRQs to IM-PD1 local numberspace */
+ if (irq1)
+ irq1 += irq_base;
+ if (irq2)
+ irq2 += irq_base;
pc_base = dev->resource.start + idev->offset;
snprintf(devname, 32, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
d = amba_ahb_device_add_res(&dev->dev, devname, pc_base, SZ_4K,
- dev->irq, dev->irq,
+ irq1, irq2,
idev->platform_data, idev->id,
&dev->resource);
if (IS_ERR(d)) {
@@ -353,14 +378,6 @@ static int impd1_probe(struct lm_device *dev)
}
return 0;
-
- free_impd1:
- if (impd1 && impd1->base)
- iounmap(impd1->base);
- kfree(impd1);
- release_lm:
- release_mem_region(dev->resource.start, SZ_4K);
- return ret;
}
static int impd1_remove_one(struct device *dev, void *data)
@@ -371,16 +388,10 @@ static int impd1_remove_one(struct device *dev, void *data)
static void impd1_remove(struct lm_device *dev)
{
- struct impd1_module *impd1 = lm_get_drvdata(dev);
-
device_for_each_child(&dev->dev, NULL, impd1_remove_one);
integrator_impd1_clk_exit(dev->id);
lm_set_drvdata(dev, NULL);
-
- iounmap(impd1->base);
- kfree(impd1);
- release_mem_region(dev->resource.start, SZ_4K);
}
static struct lm_driver impd1_driver = {
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index e4f27f0e56ac..cc0857cab2e1 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -42,6 +42,7 @@
#include <linux/sys_soc.h>
#include <linux/termios.h>
#include <linux/sched_clock.h>
+#include <linux/clk-provider.h>
#include <mach/hardware.h>
#include <mach/platform.h>
@@ -402,10 +403,7 @@ static void __init ap_of_timer_init(void)
struct clk *clk;
unsigned long rate;
- clk = clk_get_sys("ap_timer", NULL);
- BUG_ON(IS_ERR(clk));
- clk_prepare_enable(clk);
- rate = clk_get_rate(clk);
+ of_clk_init(NULL);
err = of_property_read_string(of_aliases,
"arm,timer-primary", &path);
@@ -415,6 +413,12 @@ static void __init ap_of_timer_init(void)
base = of_iomap(node, 0);
if (WARN_ON(!base))
return;
+
+ clk = of_clk_get(node, 0);
+ BUG_ON(IS_ERR(clk));
+ clk_prepare_enable(clk);
+ rate = clk_get_rate(clk);
+
writel(0, base + TIMER_CTRL);
integrator_clocksource_init(rate, base);
@@ -427,6 +431,12 @@ static void __init ap_of_timer_init(void)
if (WARN_ON(!base))
return;
irq = irq_of_parse_and_map(node, 0);
+
+ clk = of_clk_get(node, 0);
+ BUG_ON(IS_ERR(clk));
+ clk_prepare_enable(clk);
+ rate = clk_get_rate(clk);
+
writel(0, base + TIMER_CTRL);
integrator_clockevent_init(rate, base, irq);
}
@@ -440,7 +450,6 @@ static void __init ap_init_irq_of(void)
{
cm_init();
of_irq_init(fpga_irq_of_match);
- integrator_clk_init(false);
}
/* For the Device Tree, add in the UART callbacks as AUXDATA */
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index a3ef961e4a93..0ad5f60598c8 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -23,7 +23,6 @@
#include <linux/irqchip/versatile-fpga.h>
#include <linux/gfp.h>
#include <linux/mtd/physmap.h>
-#include <linux/platform_data/clk-integrator.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
@@ -33,8 +32,6 @@
#include <mach/platform.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
-#include <asm/hardware/arm_timer.h>
-#include <asm/hardware/icst.h>
#include <mach/lm.h>
@@ -43,8 +40,6 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <asm/hardware/timer-sp.h>
-
#include <plat/clcd.h>
#include <plat/sched_clock.h>
@@ -250,7 +245,6 @@ static void __init intcp_init_irq_of(void)
{
cm_init();
of_irq_init(fpga_irq_of_match);
- integrator_clk_init(true);
}
/*
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 6e5077e2ec26..1c37082c8b39 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -22,6 +22,7 @@
#define CPU_RESET 0x00000002
#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
+#define RSTOUTn_MASK_PHYS (BRIDGE_PHYS_BASE + 0x0108)
#define SOFT_RESET_OUT_EN 0x00000004
#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
index 5f03484584d4..e20d6da234a6 100644
--- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
@@ -15,6 +15,7 @@
#define L2_WRITETHROUGH 0x00020000
#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
+#define RSTOUTn_MASK_PHYS (BRIDGE_PHYS_BASE + 0x0108)
#define SOFT_RESET_OUT_EN 0x00000004
#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 5c22c0899e9c..cb31d4390d52 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -74,6 +74,7 @@ config SOC_DRA7XX
select ARM_CPU_SUSPEND if PM
select ARM_GIC
select HAVE_ARM_ARCH_TIMER
+ select IRQ_CROSSBAR
config ARCH_OMAP2PLUS
bool
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index 3664562f9148..693fe486e917 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -138,7 +138,7 @@ static void wakeupgen_mask(struct irq_data *d)
unsigned long flags;
raw_spin_lock_irqsave(&wakeupgen_lock, flags);
- _wakeupgen_clear(d->irq, irq_target_cpu[d->irq]);
+ _wakeupgen_clear(d->hwirq, irq_target_cpu[d->hwirq]);
raw_spin_unlock_irqrestore(&wakeupgen_lock, flags);
}
@@ -150,7 +150,7 @@ static void wakeupgen_unmask(struct irq_data *d)
unsigned long flags;
raw_spin_lock_irqsave(&wakeupgen_lock, flags);
- _wakeupgen_set(d->irq, irq_target_cpu[d->irq]);
+ _wakeupgen_set(d->hwirq, irq_target_cpu[d->hwirq]);
raw_spin_unlock_irqrestore(&wakeupgen_lock, flags);
}
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 6cd3f3772ecf..95e171a055f3 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -22,6 +22,7 @@
#include <linux/of_platform.h>
#include <linux/export.h>
#include <linux/irqchip/arm-gic.h>
+#include <linux/irqchip/irq-crossbar.h>
#include <linux/of_address.h>
#include <linux/reboot.h>
@@ -288,5 +289,8 @@ void __init omap_gic_of_init(void)
skip_errata_init:
omap_wakeupgen_init();
+#ifdef CONFIG_IRQ_CROSSBAR
+ irqcrossbar_init();
+#endif
irqchip_init();
}
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
index f727d03f1688..5766e3fbff69 100644
--- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h
+++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
@@ -18,6 +18,7 @@
#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE + 0x104)
#define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE + 0x108)
+#define RSTOUTn_MASK_PHYS (ORION5X_BRIDGE_PHYS_BASE + 0x108)
#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE + 0x10c)
diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c
index e6ab0cd5b286..bee0073c9b64 100644
--- a/arch/arm/mach-shmobile/clock-r7s72100.c
+++ b/arch/arm/mach-shmobile/clock-r7s72100.c
@@ -22,12 +22,15 @@
#include <mach/common.h>
#include <mach/r7s72100.h>
-/* registers */
+/* Frequency Control Registers */
#define FRQCR 0xfcfe0010
#define FRQCR2 0xfcfe0014
+/* Standby Control Registers */
#define STBCR3 0xfcfe0420
#define STBCR4 0xfcfe0424
+#define STBCR7 0xfcfe0430
#define STBCR9 0xfcfe0438
+#define STBCR10 0xfcfe043c
#define PLL_RATE 30
@@ -67,7 +70,7 @@ static struct clk pll_clk = {
static unsigned long bus_recalc(struct clk *clk)
{
- return clk->parent->rate * 2 / 3;
+ return clk->parent->rate / 3;
}
static struct sh_clk_ops bus_clk_ops = {
@@ -145,15 +148,25 @@ struct clk div4_clks[DIV4_NR] = {
| CLK_ENABLE_ON_INIT),
};
-enum { MSTP97, MSTP96, MSTP95, MSTP94,
+enum {
+ MSTP107, MSTP106, MSTP105, MSTP104, MSTP103,
+ MSTP97, MSTP96, MSTP95, MSTP94,
+ MSTP74,
MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
- MSTP33, MSTP_NR };
+ MSTP33, MSTP_NR
+};
static struct clk mstp_clks[MSTP_NR] = {
+ [MSTP107] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 7, 0), /* RSPI0 */
+ [MSTP106] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 6, 0), /* RSPI1 */
+ [MSTP105] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 5, 0), /* RSPI2 */
+ [MSTP104] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 4, 0), /* RSPI3 */
+ [MSTP103] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 3, 0), /* RSPI4 */
[MSTP97] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 7, 0), /* RIIC0 */
[MSTP96] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 6, 0), /* RIIC1 */
[MSTP95] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 5, 0), /* RIIC2 */
[MSTP94] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 4, 0), /* RIIC3 */
+ [MSTP74] = SH_CLK_MSTP8(&peripheral1_clk, STBCR7, 4, 0), /* Ether */
[MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */
[MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */
[MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */
@@ -176,6 +189,21 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
/* MSTP clocks */
+ CLKDEV_DEV_ID("rspi-rz.0", &mstp_clks[MSTP107]),
+ CLKDEV_DEV_ID("rspi-rz.1", &mstp_clks[MSTP106]),
+ CLKDEV_DEV_ID("rspi-rz.2", &mstp_clks[MSTP105]),
+ CLKDEV_DEV_ID("rspi-rz.3", &mstp_clks[MSTP104]),
+ CLKDEV_DEV_ID("rspi-rz.4", &mstp_clks[MSTP103]),
+ CLKDEV_DEV_ID("e800c800.spi", &mstp_clks[MSTP107]),
+ CLKDEV_DEV_ID("e800d000.spi", &mstp_clks[MSTP106]),
+ CLKDEV_DEV_ID("e800d800.spi", &mstp_clks[MSTP105]),
+ CLKDEV_DEV_ID("e800e000.spi", &mstp_clks[MSTP104]),
+ CLKDEV_DEV_ID("e800e800.spi", &mstp_clks[MSTP103]),
+ CLKDEV_DEV_ID("fcfee000.i2c", &mstp_clks[MSTP97]),
+ CLKDEV_DEV_ID("fcfee400.i2c", &mstp_clks[MSTP96]),
+ CLKDEV_DEV_ID("fcfee800.i2c", &mstp_clks[MSTP95]),
+ CLKDEV_DEV_ID("fcfeec00.i2c", &mstp_clks[MSTP94]),
+ CLKDEV_DEV_ID("r7s72100-ether", &mstp_clks[MSTP74]),
CLKDEV_CON_ID("mtu2_fck", &mstp_clks[MSTP33]),
/* ICK */
diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index 9783945f8bc7..2009a9bc6356 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -221,6 +221,10 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("fffc6000.spi", &mstp_clks[MSTP007]), /* HSPI2 */
CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP008]), /* SRU */
+ CLKDEV_ICK_ID("clk_a", "rcar_sound", &audio_clk_a),
+ CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b),
+ CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c),
+ CLKDEV_ICK_ID("clk_i", "rcar_sound", &s1_clk),
CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP012]),
CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP011]),
CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP010]),
diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index cabedebd7648..8e403ae0c7b2 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -120,16 +120,16 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP322] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 22, 0), /* SDHI1 */
[MSTP321] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 21, 0), /* SDHI2 */
[MSTP320] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 20, 0), /* SDHI3 */
- [MSTP120] = SH_CLK_MSTP32(&clks_clk, MSTPCR1, 20, 0), /* VIN3 */
- [MSTP116] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 16, 0), /* PCIe */
- [MSTP115] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 15, 0), /* SATA */
- [MSTP114] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 14, 0), /* Ether */
- [MSTP110] = SH_CLK_MSTP32(&clks_clk, MSTPCR1, 10, 0), /* VIN0 */
- [MSTP109] = SH_CLK_MSTP32(&clks_clk, MSTPCR1, 9, 0), /* VIN1 */
- [MSTP108] = SH_CLK_MSTP32(&clks_clk, MSTPCR1, 8, 0), /* VIN2 */
- [MSTP103] = SH_CLK_MSTP32(&clks_clk, MSTPCR1, 3, 0), /* DU */
- [MSTP101] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 1, 0), /* USB2 */
- [MSTP100] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 0, 0), /* USB0/1 */
+ [MSTP120] = SH_CLK_MSTP32_STS(&clks_clk, MSTPCR1, 20, MSTPSR1, 0), /* VIN3 */
+ [MSTP116] = SH_CLK_MSTP32_STS(&clkp_clk, MSTPCR1, 16, MSTPSR1, 0), /* PCIe */
+ [MSTP115] = SH_CLK_MSTP32_STS(&clkp_clk, MSTPCR1, 15, MSTPSR1, 0), /* SATA */
+ [MSTP114] = SH_CLK_MSTP32_STS(&clkp_clk, MSTPCR1, 14, MSTPSR1, 0), /* Ether */
+ [MSTP110] = SH_CLK_MSTP32_STS(&clks_clk, MSTPCR1, 10, MSTPSR1, 0), /* VIN0 */
+ [MSTP109] = SH_CLK_MSTP32_STS(&clks_clk, MSTPCR1, 9, MSTPSR1, 0), /* VIN1 */
+ [MSTP108] = SH_CLK_MSTP32_STS(&clks_clk, MSTPCR1, 8, MSTPSR1, 0), /* VIN2 */
+ [MSTP103] = SH_CLK_MSTP32_STS(&clks_clk, MSTPCR1, 3, MSTPSR1, 0), /* DU */
+ [MSTP101] = SH_CLK_MSTP32_STS(&clkp_clk, MSTPCR1, 1, MSTPSR1, 0), /* USB2 */
+ [MSTP100] = SH_CLK_MSTP32_STS(&clkp_clk, MSTPCR1, 0, MSTPSR1, 0), /* USB0/1 */
[MSTP030] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 30, 0), /* I2C0 */
[MSTP029] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 29, 0), /* I2C1 */
[MSTP028] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 28, 0), /* I2C2 */
diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index f44987a92ad4..3f93503f5b96 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -43,17 +43,26 @@
* see "p1 / 2" on R8A7790_CLOCK_ROOT() below
*/
-#define CPG_BASE 0xe6150000
-#define CPG_LEN 0x1000
-
-#define SMSTPCR1 0xe6150134
-#define SMSTPCR2 0xe6150138
-#define SMSTPCR3 0xe615013c
-#define SMSTPCR5 0xe6150144
-#define SMSTPCR7 0xe615014c
-#define SMSTPCR8 0xe6150990
-#define SMSTPCR9 0xe6150994
-#define SMSTPCR10 0xe6150998
+#define CPG_BASE 0xe6150000
+#define CPG_LEN 0x1000
+
+#define SMSTPCR1 0xe6150134
+#define SMSTPCR2 0xe6150138
+#define SMSTPCR3 0xe615013c
+#define SMSTPCR5 0xe6150144
+#define SMSTPCR7 0xe615014c
+#define SMSTPCR8 0xe6150990
+#define SMSTPCR9 0xe6150994
+#define SMSTPCR10 0xe6150998
+
+#define MSTPSR1 IOMEM(0xe6150038)
+#define MSTPSR2 IOMEM(0xe6150040)
+#define MSTPSR3 IOMEM(0xe6150048)
+#define MSTPSR5 IOMEM(0xe615003c)
+#define MSTPSR7 IOMEM(0xe61501c4)
+#define MSTPSR8 IOMEM(0xe61509a0)
+#define MSTPSR9 IOMEM(0xe61509a4)
+#define MSTPSR10 IOMEM(0xe61509a8)
#define SDCKCR 0xE6150074
#define SD2CKCR 0xE6150078
@@ -82,6 +91,15 @@ static struct clk main_clk = {
.ops = &followparent_clk_ops,
};
+static struct clk audio_clk_a = {
+};
+
+static struct clk audio_clk_b = {
+};
+
+static struct clk audio_clk_c = {
+};
+
/*
* clock ratio of these clock will be updated
* on r8a7790_clock_init()
@@ -115,6 +133,9 @@ SH_FIXED_RATIO_CLK_SET(ddr_clk, pll3_clk, 1, 8);
SH_FIXED_RATIO_CLK_SET(mp_clk, pll1_div2_clk, 1, 15);
static struct clk *main_clks[] = {
+ &audio_clk_a,
+ &audio_clk_b,
+ &audio_clk_c,
&extal_clk,
&extal_div2_clk,
&main_clk,
@@ -183,15 +204,22 @@ static struct clk div6_clks[DIV6_NR] = {
/* MSTP */
enum {
+ MSTP1017, /* parent of SCU */
+
+ MSTP1031, MSTP1030,
+ MSTP1029, MSTP1028, MSTP1027, MSTP1026, MSTP1025, MSTP1024, MSTP1023, MSTP1022,
MSTP1015, MSTP1014, MSTP1013, MSTP1012, MSTP1011, MSTP1010,
MSTP1009, MSTP1008, MSTP1007, MSTP1006, MSTP1005,
MSTP931, MSTP930, MSTP929, MSTP928,
MSTP917,
+ MSTP815, MSTP814,
MSTP813,
+ MSTP811, MSTP810, MSTP809, MSTP808,
MSTP726, MSTP725, MSTP724, MSTP723, MSTP722, MSTP721, MSTP720,
MSTP717, MSTP716,
- MSTP704,
+ MSTP704, MSTP703,
MSTP522,
+ MSTP502, MSTP501,
MSTP315, MSTP314, MSTP313, MSTP312, MSTP311, MSTP305, MSTP304,
MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202,
MSTP124,
@@ -199,53 +227,77 @@ enum {
};
static struct clk mstp_clks[MSTP_NR] = {
- [MSTP1015] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 15, 0), /* SSI0 */
- [MSTP1014] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 14, 0), /* SSI1 */
- [MSTP1013] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 13, 0), /* SSI2 */
- [MSTP1012] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 12, 0), /* SSI3 */
- [MSTP1011] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 11, 0), /* SSI4 */
- [MSTP1010] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 10, 0), /* SSI5 */
- [MSTP1009] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 9, 0), /* SSI6 */
- [MSTP1008] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 8, 0), /* SSI7 */
- [MSTP1007] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 7, 0), /* SSI8 */
- [MSTP1006] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 6, 0), /* SSI9 */
- [MSTP1005] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 5, 0), /* SSI ALL */
- [MSTP931] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 31, 0), /* I2C0 */
- [MSTP930] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 30, 0), /* I2C1 */
- [MSTP929] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 29, 0), /* I2C2 */
- [MSTP928] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 28, 0), /* I2C3 */
- [MSTP917] = SH_CLK_MSTP32(&qspi_clk, SMSTPCR9, 17, 0), /* QSPI */
- [MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */
- [MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */
- [MSTP725] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 25, 0), /* LVDS1 */
- [MSTP724] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 24, 0), /* DU0 */
- [MSTP723] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 23, 0), /* DU1 */
- [MSTP722] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 22, 0), /* DU2 */
- [MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
- [MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
- [MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */
- [MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */
- [MSTP704] = SH_CLK_MSTP32(&mp_clk, SMSTPCR7, 4, 0), /* HSUSB */
- [MSTP522] = SH_CLK_MSTP32(&extal_clk, SMSTPCR5, 22, 0), /* Thermal */
- [MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0], SMSTPCR3, 15, 0), /* MMC0 */
- [MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_SD0], SMSTPCR3, 14, 0), /* SDHI0 */
- [MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_SD1], SMSTPCR3, 13, 0), /* SDHI1 */
- [MSTP312] = SH_CLK_MSTP32(&div6_clks[DIV6_SD2], SMSTPCR3, 12, 0), /* SDHI2 */
- [MSTP311] = SH_CLK_MSTP32(&div6_clks[DIV6_SD3], SMSTPCR3, 11, 0), /* SDHI3 */
- [MSTP305] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC1], SMSTPCR3, 5, 0), /* MMC1 */
- [MSTP304] = SH_CLK_MSTP32(&cp_clk, SMSTPCR3, 4, 0), /* TPU0 */
- [MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
- [MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
- [MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
- [MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
- [MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
- [MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
- [MSTP124] = SH_CLK_MSTP32(&rclk_clk, SMSTPCR1, 24, 0), /* CMT0 */
+ [MSTP1031] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 31, MSTPSR10, 0), /* SCU0 */
+ [MSTP1030] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 30, MSTPSR10, 0), /* SCU1 */
+ [MSTP1029] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 29, MSTPSR10, 0), /* SCU2 */
+ [MSTP1028] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 28, MSTPSR10, 0), /* SCU3 */
+ [MSTP1027] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 27, MSTPSR10, 0), /* SCU4 */
+ [MSTP1026] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 26, MSTPSR10, 0), /* SCU5 */
+ [MSTP1025] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 25, MSTPSR10, 0), /* SCU6 */
+ [MSTP1024] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 24, MSTPSR10, 0), /* SCU7 */
+ [MSTP1023] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 23, MSTPSR10, 0), /* SCU8 */
+ [MSTP1022] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 22, MSTPSR10, 0), /* SCU9 */
+ [MSTP1017] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 17, MSTPSR10, 0), /* SCU */
+ [MSTP1015] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 15, MSTPSR10, 0), /* SSI0 */
+ [MSTP1014] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 14, MSTPSR10, 0), /* SSI1 */
+ [MSTP1013] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 13, MSTPSR10, 0), /* SSI2 */
+ [MSTP1012] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 12, MSTPSR10, 0), /* SSI3 */
+ [MSTP1011] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 11, MSTPSR10, 0), /* SSI4 */
+ [MSTP1010] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 10, MSTPSR10, 0), /* SSI5 */
+ [MSTP1009] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 9, MSTPSR10, 0), /* SSI6 */
+ [MSTP1008] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 8, MSTPSR10, 0), /* SSI7 */
+ [MSTP1007] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 7, MSTPSR10, 0), /* SSI8 */
+ [MSTP1006] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 6, MSTPSR10, 0), /* SSI9 */
+ [MSTP1005] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 5, MSTPSR10, 0), /* SSI ALL */
+ [MSTP931] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */
+ [MSTP930] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */
+ [MSTP929] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */
+ [MSTP928] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */
+ [MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */
+ [MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */
+ [MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */
+ [MSTP813] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR8, 13, MSTPSR8, 0), /* Ether */
+ [MSTP811] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 11, MSTPSR8, 0), /* VIN0 */
+ [MSTP810] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 10, MSTPSR8, 0), /* VIN1 */
+ [MSTP809] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 9, MSTPSR8, 0), /* VIN2 */
+ [MSTP808] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 8, MSTPSR8, 0), /* VIN3 */
+ [MSTP726] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 26, MSTPSR7, 0), /* LVDS0 */
+ [MSTP725] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 25, MSTPSR7, 0), /* LVDS1 */
+ [MSTP724] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 24, MSTPSR7, 0), /* DU0 */
+ [MSTP723] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 23, MSTPSR7, 0), /* DU1 */
+ [MSTP722] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 22, MSTPSR7, 0), /* DU2 */
+ [MSTP721] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 21, MSTPSR7, 0), /* SCIF0 */
+ [MSTP720] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 20, MSTPSR7, 0), /* SCIF1 */
+ [MSTP717] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR7, 17, MSTPSR7, 0), /* HSCIF0 */
+ [MSTP716] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR7, 16, MSTPSR7, 0), /* HSCIF1 */
+ [MSTP704] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR7, 4, MSTPSR7, 0), /* HSUSB */
+ [MSTP703] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR7, 3, MSTPSR7, 0), /* EHCI */
+ [MSTP522] = SH_CLK_MSTP32_STS(&extal_clk, SMSTPCR5, 22, MSTPSR5, 0), /* Thermal */
+ [MSTP502] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR5, 2, MSTPSR5, 0), /* Audio-DMAC low */
+ [MSTP501] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR5, 1, MSTPSR5, 0), /* Audio-DMAC hi */
+ [MSTP315] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_MMC0], SMSTPCR3, 15, MSTPSR3, 0), /* MMC0 */
+ [MSTP314] = SH_CLK_MSTP32_STS(&div4_clks[DIV4_SD0], SMSTPCR3, 14, MSTPSR3, 0), /* SDHI0 */
+ [MSTP313] = SH_CLK_MSTP32_STS(&div4_clks[DIV4_SD1], SMSTPCR3, 13, MSTPSR3, 0), /* SDHI1 */
+ [MSTP312] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_SD2], SMSTPCR3, 12, MSTPSR3, 0), /* SDHI2 */
+ [MSTP311] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_SD3], SMSTPCR3, 11, MSTPSR3, 0), /* SDHI3 */
+ [MSTP305] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_MMC1], SMSTPCR3, 5, MSTPSR3, 0), /* MMC1 */
+ [MSTP304] = SH_CLK_MSTP32_STS(&cp_clk, SMSTPCR3, 4, MSTPSR3, 0), /* TPU0 */
+ [MSTP216] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 16, MSTPSR2, 0), /* SCIFB2 */
+ [MSTP207] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 7, MSTPSR2, 0), /* SCIFB1 */
+ [MSTP206] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 6, MSTPSR2, 0), /* SCIFB0 */
+ [MSTP204] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 4, MSTPSR2, 0), /* SCIFA0 */
+ [MSTP203] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 3, MSTPSR2, 0), /* SCIFA1 */
+ [MSTP202] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 2, MSTPSR2, 0), /* SCIFA2 */
+ [MSTP124] = SH_CLK_MSTP32_STS(&rclk_clk, SMSTPCR1, 24, MSTPSR1, 0), /* CMT0 */
};
static struct clk_lookup lookups[] = {
/* main clocks */
+ CLKDEV_CON_ID("audio_clk_a", &audio_clk_a),
+ CLKDEV_CON_ID("audio_clk_b", &audio_clk_b),
+ CLKDEV_CON_ID("audio_clk_c", &audio_clk_c),
+ CLKDEV_CON_ID("audio_clk_internal", &m2_clk),
CLKDEV_CON_ID("extal", &extal_clk),
CLKDEV_CON_ID("extal_div2", &extal_div2_clk),
CLKDEV_CON_ID("main", &main_clk),
@@ -291,32 +343,32 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]),
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]),
CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]),
- CLKDEV_DEV_ID("e6508000.i2c", &mstp_clks[MSTP931]),
CLKDEV_DEV_ID("i2c-rcar_gen2.0", &mstp_clks[MSTP931]),
- CLKDEV_DEV_ID("e6518000.i2c", &mstp_clks[MSTP930]),
CLKDEV_DEV_ID("i2c-rcar_gen2.1", &mstp_clks[MSTP930]),
- CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP929]),
CLKDEV_DEV_ID("i2c-rcar_gen2.2", &mstp_clks[MSTP929]),
- CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP928]),
CLKDEV_DEV_ID("i2c-rcar_gen2.3", &mstp_clks[MSTP928]),
CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]),
- CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
+ CLKDEV_DEV_ID("r8a7790-vin.0", &mstp_clks[MSTP811]),
+ CLKDEV_DEV_ID("r8a7790-vin.1", &mstp_clks[MSTP810]),
+ CLKDEV_DEV_ID("r8a7790-vin.2", &mstp_clks[MSTP809]),
+ CLKDEV_DEV_ID("r8a7790-vin.3", &mstp_clks[MSTP808]),
CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
- CLKDEV_DEV_ID("ee200000.mmc", &mstp_clks[MSTP315]),
+ CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP502]),
+ CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP501]),
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
- CLKDEV_DEV_ID("ee100000.sd", &mstp_clks[MSTP314]),
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]),
- CLKDEV_DEV_ID("ee120000.sd", &mstp_clks[MSTP313]),
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]),
- CLKDEV_DEV_ID("ee140000.sd", &mstp_clks[MSTP312]),
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]),
- CLKDEV_DEV_ID("ee160000.sd", &mstp_clks[MSTP311]),
CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP311]),
- CLKDEV_DEV_ID("ee220000.mmc", &mstp_clks[MSTP305]),
CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]),
CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP704]),
+ CLKDEV_DEV_ID("pci-rcar-gen2.0", &mstp_clks[MSTP703]),
+ CLKDEV_DEV_ID("pci-rcar-gen2.1", &mstp_clks[MSTP703]),
+ CLKDEV_DEV_ID("pci-rcar-gen2.2", &mstp_clks[MSTP703]),
+ CLKDEV_DEV_ID("sata-r8a7790.0", &mstp_clks[MSTP815]),
+ CLKDEV_DEV_ID("sata-r8a7790.1", &mstp_clks[MSTP814]),
/* ICK */
CLKDEV_ICK_ID("usbhs", "usb_phy_rcar_gen2", &mstp_clks[MSTP704]),
@@ -325,6 +377,20 @@ static struct clk_lookup lookups[] = {
CLKDEV_ICK_ID("du.0", "rcar-du-r8a7790", &mstp_clks[MSTP724]),
CLKDEV_ICK_ID("du.1", "rcar-du-r8a7790", &mstp_clks[MSTP723]),
CLKDEV_ICK_ID("du.2", "rcar-du-r8a7790", &mstp_clks[MSTP722]),
+ CLKDEV_ICK_ID("clk_a", "rcar_sound", &audio_clk_a),
+ CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b),
+ CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c),
+ CLKDEV_ICK_ID("clk_i", "rcar_sound", &m2_clk),
+ CLKDEV_ICK_ID("scu.0", "rcar_sound", &mstp_clks[MSTP1031]),
+ CLKDEV_ICK_ID("scu.1", "rcar_sound", &mstp_clks[MSTP1030]),
+ CLKDEV_ICK_ID("scu.2", "rcar_sound", &mstp_clks[MSTP1029]),
+ CLKDEV_ICK_ID("scu.3", "rcar_sound", &mstp_clks[MSTP1028]),
+ CLKDEV_ICK_ID("scu.4", "rcar_sound", &mstp_clks[MSTP1027]),
+ CLKDEV_ICK_ID("scu.5", "rcar_sound", &mstp_clks[MSTP1026]),
+ CLKDEV_ICK_ID("scu.6", "rcar_sound", &mstp_clks[MSTP1025]),
+ CLKDEV_ICK_ID("scu.7", "rcar_sound", &mstp_clks[MSTP1024]),
+ CLKDEV_ICK_ID("scu.8", "rcar_sound", &mstp_clks[MSTP1023]),
+ CLKDEV_ICK_ID("scu.9", "rcar_sound", &mstp_clks[MSTP1022]),
CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP1015]),
CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP1014]),
CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP1013]),
diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
index f5461262ee25..701383fe3267 100644
--- a/arch/arm/mach-shmobile/clock-r8a7791.c
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -59,10 +59,19 @@
#define SMSTPCR10 0xE6150998
#define SMSTPCR11 0xE615099C
+#define MSTPSR1 IOMEM(0xe6150038)
+#define MSTPSR2 IOMEM(0xe6150040)
+#define MSTPSR3 IOMEM(0xe6150048)
+#define MSTPSR5 IOMEM(0xe615003c)
+#define MSTPSR7 IOMEM(0xe61501c4)
+#define MSTPSR8 IOMEM(0xe61509a0)
+#define MSTPSR9 IOMEM(0xe61509a4)
+#define MSTPSR11 IOMEM(0xe61509ac)
+
#define MODEMR 0xE6160060
#define SDCKCR 0xE6150074
-#define SD2CKCR 0xE6150078
-#define SD3CKCR 0xE615007C
+#define SD1CKCR 0xE6150078
+#define SD2CKCR 0xE615026c
#define MMC0CKCR 0xE6150240
#define MMC1CKCR 0xE6150244
#define SSPCKCR 0xE6150248
@@ -93,6 +102,7 @@ static struct clk main_clk = {
*/
SH_FIXED_RATIO_CLK_SET(pll1_clk, main_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(pll3_clk, main_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(qspi_clk, pll1_clk, 1, 1);
/* fixed ratio clock */
SH_FIXED_RATIO_CLK_SET(extal_div2_clk, extal_clk, 1, 2);
@@ -103,7 +113,9 @@ SH_FIXED_RATIO_CLK_SET(hp_clk, pll1_clk, 1, 12);
SH_FIXED_RATIO_CLK_SET(p_clk, pll1_clk, 1, 24);
SH_FIXED_RATIO_CLK_SET(rclk_clk, pll1_clk, 1, (48 * 1024));
SH_FIXED_RATIO_CLK_SET(mp_clk, pll1_div2_clk, 1, 15);
+SH_FIXED_RATIO_CLK_SET(zg_clk, pll1_clk, 1, 3);
SH_FIXED_RATIO_CLK_SET(zx_clk, pll1_clk, 1, 3);
+SH_FIXED_RATIO_CLK_SET(zs_clk, pll1_clk, 1, 6);
static struct clk *main_clks[] = {
&extal_clk,
@@ -114,46 +126,103 @@ static struct clk *main_clks[] = {
&pll3_clk,
&hp_clk,
&p_clk,
+ &qspi_clk,
&rclk_clk,
&mp_clk,
&cp_clk,
+ &zg_clk,
&zx_clk,
+ &zs_clk,
+};
+
+/* SDHI (DIV4) clock */
+static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, 24, 0, 36, 48, 10 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+ .divisors = divisors,
+ .nr_divisors = ARRAY_SIZE(divisors),
+};
+
+static struct clk_div4_table div4_table = {
+ .div_mult_table = &div4_div_mult_table,
+};
+
+enum {
+ DIV4_SDH, DIV4_SD0,
+ DIV4_NR
+};
+
+static struct clk div4_clks[DIV4_NR] = {
+ [DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT),
+ [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT),
+};
+
+/* DIV6 clocks */
+enum {
+ DIV6_SD1, DIV6_SD2,
+ DIV6_NR
+};
+
+static struct clk div6_clks[DIV6_NR] = {
+ [DIV6_SD1] = SH_CLK_DIV6(&pll1_div2_clk, SD1CKCR, 0),
+ [DIV6_SD2] = SH_CLK_DIV6(&pll1_div2_clk, SD2CKCR, 0),
};
/* MSTP */
enum {
+ MSTP1108, MSTP1107, MSTP1106,
+ MSTP931, MSTP930, MSTP929, MSTP928, MSTP927, MSTP925,
+ MSTP917,
+ MSTP815, MSTP814,
MSTP813,
+ MSTP811, MSTP810, MSTP809,
MSTP726, MSTP724, MSTP723, MSTP721, MSTP720,
MSTP719, MSTP718, MSTP715, MSTP714,
MSTP522,
+ MSTP314, MSTP312, MSTP311,
MSTP216, MSTP207, MSTP206,
- MSTP204, MSTP203, MSTP202, MSTP1105, MSTP1106, MSTP1107,
+ MSTP204, MSTP203, MSTP202,
MSTP124,
MSTP_NR
};
static struct clk mstp_clks[MSTP_NR] = {
- [MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */
- [MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */
- [MSTP724] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 24, 0), /* DU0 */
- [MSTP723] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 23, 0), /* DU1 */
- [MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
- [MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
- [MSTP719] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 19, 0), /* SCIF2 */
- [MSTP718] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 18, 0), /* SCIF3 */
- [MSTP715] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 15, 0), /* SCIF4 */
- [MSTP714] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 14, 0), /* SCIF5 */
- [MSTP522] = SH_CLK_MSTP32(&extal_clk, SMSTPCR5, 22, 0), /* Thermal */
- [MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
- [MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
- [MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
- [MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
- [MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
- [MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
- [MSTP1105] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 5, 0), /* SCIFA3 */
- [MSTP1106] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 6, 0), /* SCIFA4 */
- [MSTP1107] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 7, 0), /* SCIFA5 */
- [MSTP124] = SH_CLK_MSTP32(&rclk_clk, SMSTPCR1, 24, 0), /* CMT0 */
+ [MSTP1108] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 8, MSTPSR11, 0), /* SCIFA5 */
+ [MSTP1107] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 7, MSTPSR11, 0), /* SCIFA4 */
+ [MSTP1106] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 6, MSTPSR11, 0), /* SCIFA3 */
+ [MSTP931] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */
+ [MSTP930] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */
+ [MSTP929] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */
+ [MSTP928] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */
+ [MSTP927] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 27, MSTPSR9, 0), /* I2C4 */
+ [MSTP925] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 25, MSTPSR9, 0), /* I2C5 */
+ [MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */
+ [MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */
+ [MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */
+ [MSTP813] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR8, 13, MSTPSR8, 0), /* Ether */
+ [MSTP811] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 11, MSTPSR8, 0), /* VIN0 */
+ [MSTP810] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 10, MSTPSR8, 0), /* VIN1 */
+ [MSTP809] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 9, MSTPSR8, 0), /* VIN2 */
+ [MSTP726] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 26, MSTPSR7, 0), /* LVDS0 */
+ [MSTP724] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 24, MSTPSR7, 0), /* DU0 */
+ [MSTP723] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 23, MSTPSR7, 0), /* DU1 */
+ [MSTP721] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 21, MSTPSR7, 0), /* SCIF0 */
+ [MSTP720] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 20, MSTPSR7, 0), /* SCIF1 */
+ [MSTP719] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 19, MSTPSR7, 0), /* SCIF2 */
+ [MSTP718] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 18, MSTPSR7, 0), /* SCIF3 */
+ [MSTP715] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 15, MSTPSR7, 0), /* SCIF4 */
+ [MSTP714] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 14, MSTPSR7, 0), /* SCIF5 */
+ [MSTP522] = SH_CLK_MSTP32_STS(&extal_clk, SMSTPCR5, 22, MSTPSR5, 0), /* Thermal */
+ [MSTP314] = SH_CLK_MSTP32_STS(&div4_clks[DIV4_SD0], SMSTPCR3, 14, MSTPSR3, 0), /* SDHI0 */
+ [MSTP312] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_SD1], SMSTPCR3, 12, MSTPSR3, 0), /* SDHI1 */
+ [MSTP311] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_SD2], SMSTPCR3, 11, MSTPSR3, 0), /* SDHI2 */
+ [MSTP216] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 16, MSTPSR2, 0), /* SCIFB2 */
+ [MSTP207] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 7, MSTPSR2, 0), /* SCIFB1 */
+ [MSTP206] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 6, MSTPSR2, 0), /* SCIFB0 */
+ [MSTP204] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 4, MSTPSR2, 0), /* SCIFA0 */
+ [MSTP203] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 3, MSTPSR2, 0), /* SCIFA1 */
+ [MSTP202] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 2, MSTPSR2, 0), /* SCIFA2 */
+ [MSTP124] = SH_CLK_MSTP32_STS(&rclk_clk, SMSTPCR1, 24, MSTPSR1, 0), /* CMT0 */
};
static struct clk_lookup lookups[] = {
@@ -165,8 +234,11 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("pll1", &pll1_clk),
CLKDEV_CON_ID("pll1_div2", &pll1_div2_clk),
CLKDEV_CON_ID("pll3", &pll3_clk),
+ CLKDEV_CON_ID("zg", &zg_clk),
+ CLKDEV_CON_ID("zs", &zs_clk),
CLKDEV_CON_ID("hp", &hp_clk),
CLKDEV_CON_ID("p", &p_clk),
+ CLKDEV_CON_ID("qspi", &qspi_clk),
CLKDEV_CON_ID("rclk", &rclk_clk),
CLKDEV_CON_ID("mp", &mp_clk),
CLKDEV_CON_ID("cp", &cp_clk),
@@ -188,13 +260,27 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP718]), /* SCIF3 */
CLKDEV_DEV_ID("sh-sci.10", &mstp_clks[MSTP715]), /* SCIF4 */
CLKDEV_DEV_ID("sh-sci.11", &mstp_clks[MSTP714]), /* SCIF5 */
- CLKDEV_DEV_ID("sh-sci.12", &mstp_clks[MSTP1105]), /* SCIFA3 */
- CLKDEV_DEV_ID("sh-sci.13", &mstp_clks[MSTP1106]), /* SCIFA4 */
- CLKDEV_DEV_ID("sh-sci.14", &mstp_clks[MSTP1107]), /* SCIFA5 */
+ CLKDEV_DEV_ID("sh-sci.12", &mstp_clks[MSTP1106]), /* SCIFA3 */
+ CLKDEV_DEV_ID("sh-sci.13", &mstp_clks[MSTP1107]), /* SCIFA4 */
+ CLKDEV_DEV_ID("sh-sci.14", &mstp_clks[MSTP1108]), /* SCIFA5 */
+ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]),
+ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP312]),
+ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]),
CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
- CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
+ CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]),
CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
+ CLKDEV_DEV_ID("i2c-rcar_gen2.0", &mstp_clks[MSTP931]),
+ CLKDEV_DEV_ID("i2c-rcar_gen2.1", &mstp_clks[MSTP930]),
+ CLKDEV_DEV_ID("i2c-rcar_gen2.2", &mstp_clks[MSTP929]),
+ CLKDEV_DEV_ID("i2c-rcar_gen2.3", &mstp_clks[MSTP928]),
+ CLKDEV_DEV_ID("i2c-rcar_gen2.4", &mstp_clks[MSTP927]),
+ CLKDEV_DEV_ID("i2c-rcar_gen2.5", &mstp_clks[MSTP925]),
CLKDEV_DEV_ID("r8a7791-ether", &mstp_clks[MSTP813]), /* Ether */
+ CLKDEV_DEV_ID("r8a7791-vin.0", &mstp_clks[MSTP811]),
+ CLKDEV_DEV_ID("r8a7791-vin.1", &mstp_clks[MSTP810]),
+ CLKDEV_DEV_ID("r8a7791-vin.2", &mstp_clks[MSTP809]),
+ CLKDEV_DEV_ID("sata-r8a7791.0", &mstp_clks[MSTP815]),
+ CLKDEV_DEV_ID("sata-r8a7791.1", &mstp_clks[MSTP814]),
};
#define R8A7791_CLOCK_ROOT(e, m, p0, p1, p30, p31) \
@@ -232,10 +318,21 @@ void __init r8a7791_clock_init(void)
break;
}
+ if ((mode & (MD(3) | MD(2) | MD(1))) == MD(2))
+ SH_CLK_SET_RATIO(&qspi_clk_ratio, 1, 16);
+ else
+ SH_CLK_SET_RATIO(&qspi_clk_ratio, 1, 20);
+
for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
ret = clk_register(main_clks[k]);
if (!ret)
+ ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+ if (!ret)
+ ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+
+ if (!ret)
ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h
index 3389f0775def..0b95babe84ba 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7790.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h
@@ -3,6 +3,31 @@
#include <mach/rcar-gen2.h>
+/* DMA slave IDs */
+enum {
+ RCAR_DMA_SLAVE_INVALID,
+ AUDIO_DMAC_SLAVE_SSI0_TX,
+ AUDIO_DMAC_SLAVE_SSI0_RX,
+ AUDIO_DMAC_SLAVE_SSI1_TX,
+ AUDIO_DMAC_SLAVE_SSI1_RX,
+ AUDIO_DMAC_SLAVE_SSI2_TX,
+ AUDIO_DMAC_SLAVE_SSI2_RX,
+ AUDIO_DMAC_SLAVE_SSI3_TX,
+ AUDIO_DMAC_SLAVE_SSI3_RX,
+ AUDIO_DMAC_SLAVE_SSI4_TX,
+ AUDIO_DMAC_SLAVE_SSI4_RX,
+ AUDIO_DMAC_SLAVE_SSI5_TX,
+ AUDIO_DMAC_SLAVE_SSI5_RX,
+ AUDIO_DMAC_SLAVE_SSI6_TX,
+ AUDIO_DMAC_SLAVE_SSI6_RX,
+ AUDIO_DMAC_SLAVE_SSI7_TX,
+ AUDIO_DMAC_SLAVE_SSI7_RX,
+ AUDIO_DMAC_SLAVE_SSI8_TX,
+ AUDIO_DMAC_SLAVE_SSI8_RX,
+ AUDIO_DMAC_SLAVE_SSI9_TX,
+ AUDIO_DMAC_SLAVE_SSI9_RX,
+};
+
void r8a7790_add_standard_devices(void);
void r8a7790_add_dt_devices(void);
void r8a7790_clock_init(void);
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 6ab37aa1e919..c4616f0698c6 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -24,12 +24,100 @@
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_data/irq-renesas-irqc.h>
#include <linux/serial_sci.h>
+#include <linux/sh_dma.h>
#include <linux/sh_timer.h>
#include <mach/common.h>
+#include <mach/dma-register.h>
#include <mach/irqs.h>
#include <mach/r8a7790.h>
#include <asm/mach/arch.h>
+/* Audio-DMAC */
+#define AUDIO_DMAC_SLAVE(_id, _addr, t, r) \
+{ \
+ .slave_id = AUDIO_DMAC_SLAVE_## _id ##_TX, \
+ .addr = _addr + 0x8, \
+ .chcr = CHCR_TX(XMIT_SZ_32BIT), \
+ .mid_rid = t, \
+}, { \
+ .slave_id = AUDIO_DMAC_SLAVE_## _id ##_RX, \
+ .addr = _addr + 0xc, \
+ .chcr = CHCR_RX(XMIT_SZ_32BIT), \
+ .mid_rid = r, \
+}
+
+static const struct sh_dmae_slave_config r8a7790_audio_dmac_slaves[] = {
+ AUDIO_DMAC_SLAVE(SSI0, 0xec241000, 0x01, 0x02),
+ AUDIO_DMAC_SLAVE(SSI1, 0xec241040, 0x03, 0x04),
+ AUDIO_DMAC_SLAVE(SSI2, 0xec241080, 0x05, 0x06),
+ AUDIO_DMAC_SLAVE(SSI3, 0xec2410c0, 0x07, 0x08),
+ AUDIO_DMAC_SLAVE(SSI4, 0xec241100, 0x09, 0x0a),
+ AUDIO_DMAC_SLAVE(SSI5, 0xec241140, 0x0b, 0x0c),
+ AUDIO_DMAC_SLAVE(SSI6, 0xec241180, 0x0d, 0x0e),
+ AUDIO_DMAC_SLAVE(SSI7, 0xec2411c0, 0x0f, 0x10),
+ AUDIO_DMAC_SLAVE(SSI8, 0xec241200, 0x11, 0x12),
+ AUDIO_DMAC_SLAVE(SSI9, 0xec241240, 0x13, 0x14),
+};
+
+#define DMAE_CHANNEL(a, b) \
+{ \
+ .offset = (a) - 0x20, \
+ .dmars = (a) - 0x20 + 0x40, \
+ .chclr_bit = (b), \
+ .chclr_offset = 0x80 - 0x20, \
+}
+
+static const struct sh_dmae_channel r8a7790_audio_dmac_channels[] = {
+ DMAE_CHANNEL(0x8000, 0),
+ DMAE_CHANNEL(0x8080, 1),
+ DMAE_CHANNEL(0x8100, 2),
+ DMAE_CHANNEL(0x8180, 3),
+ DMAE_CHANNEL(0x8200, 4),
+ DMAE_CHANNEL(0x8280, 5),
+ DMAE_CHANNEL(0x8300, 6),
+ DMAE_CHANNEL(0x8380, 7),
+ DMAE_CHANNEL(0x8400, 8),
+ DMAE_CHANNEL(0x8480, 9),
+ DMAE_CHANNEL(0x8500, 10),
+ DMAE_CHANNEL(0x8580, 11),
+ DMAE_CHANNEL(0x8600, 12),
+};
+
+static struct sh_dmae_pdata r8a7790_audio_dmac_platform_data = {
+ .slave = r8a7790_audio_dmac_slaves,
+ .slave_num = ARRAY_SIZE(r8a7790_audio_dmac_slaves),
+ .channel = r8a7790_audio_dmac_channels,
+ .channel_num = ARRAY_SIZE(r8a7790_audio_dmac_channels),
+ .ts_low_shift = TS_LOW_SHIFT,
+ .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT,
+ .ts_high_shift = TS_HI_SHIFT,
+ .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT,
+ .ts_shift = dma_ts_shift,
+ .ts_shift_num = ARRAY_SIZE(dma_ts_shift),
+ .dmaor_init = DMAOR_DME,
+ .chclr_present = 1,
+ .chclr_bitwise = 1,
+};
+
+static struct resource r8a7790_audio_dmac_resources[] = {
+ /* Channel registers and DMAOR for low */
+ DEFINE_RES_MEM(0xec700020, 0x8663 - 0x20),
+ DEFINE_RES_IRQ(gic_spi(346)),
+ DEFINE_RES_NAMED(gic_spi(320), 13, NULL, IORESOURCE_IRQ),
+
+ /* Channel registers and DMAOR for hi */
+ DEFINE_RES_MEM(0xec720020, 0x8663 - 0x20), /* hi */
+ DEFINE_RES_IRQ(gic_spi(347)),
+ DEFINE_RES_NAMED(gic_spi(333), 13, NULL, IORESOURCE_IRQ),
+};
+
+#define r8a7790_register_audio_dmac(id) \
+ platform_device_register_resndata( \
+ &platform_bus, "sh-dma-engine", id, \
+ &r8a7790_audio_dmac_resources[id * 3], 3, \
+ &r8a7790_audio_dmac_platform_data, \
+ sizeof(r8a7790_audio_dmac_platform_data))
+
static const struct resource pfc_resources[] __initconst = {
DEFINE_RES_MEM(0xe6060000, 0x250),
};
@@ -101,6 +189,8 @@ void __init r8a7790_pinmux_init(void)
r8a7790_register_i2c(1);
r8a7790_register_i2c(2);
r8a7790_register_i2c(3);
+ r8a7790_register_audio_dmac(0);
+ r8a7790_register_audio_dmac(1);
}
#define __R8A7790_SCIF(scif_type, _scscr, index, baseaddr, irq) \
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index d2c13ba1190b..abf9ee9bbc3f 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -5,6 +5,7 @@ menuconfig ARCH_STI
select PINCTRL
select PINCTRL_ST
select MFD_SYSCON
+ select ARCH_HAS_RESET_CONTROLLER
select HAVE_ARM_SCU if SMP
select ARCH_REQUIRE_GPIOLIB
select ARM_ERRATA_754322
@@ -24,6 +25,7 @@ if ARCH_STI
config SOC_STIH415
bool "STiH415 STMicroelectronics Consumer Electronics family"
default y
+ select STIH415_RESET
help
This enables support for STMicroelectronics Digital Consumer
Electronics family StiH415 parts, primarily targeted at set-top-box
@@ -33,6 +35,7 @@ config SOC_STIH415
config SOC_STIH416
bool "STiH416 STMicroelectronics Consumer Electronics family"
default y
+ select STIH416_RESET
help
This enables support for STMicroelectronics Digital Consumer
Electronics family StiH416 parts, primarily targeted at set-top-box
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index a335126ae18f..f2c89fb8fca9 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -108,7 +108,7 @@ void __init versatile_init_irq(void)
np = of_find_matching_node_by_address(NULL, vic_of_match,
VERSATILE_VIC_BASE);
- __vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0, np);
+ __vic_init(VA_VIC_BASE, 0, IRQ_VIC_START, ~0, 0, np);
writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 830ff07f3385..3ec6e8e8d368 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -595,14 +595,16 @@ void __init orion_spi_1_init(unsigned long mapbase)
/*****************************************************************************
* Watchdog
****************************************************************************/
-static struct resource orion_wdt_resource =
- DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x28);
+static struct resource orion_wdt_resource[] = {
+ DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04),
+ DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04),
+};
static struct platform_device orion_wdt_device = {
.name = "orion_wdt",
.id = -1,
- .num_resources = 1,
- .resource = &orion_wdt_resource,
+ .num_resources = ARRAY_SIZE(orion_wdt_resource),
+ .resource = orion_wdt_resource,
};
void __init orion_wdt_init(void)
diff --git a/drivers/amba/tegra-ahb.c b/drivers/amba/tegra-ahb.c
index 1f44e56cc65d..558a239954e8 100644
--- a/drivers/amba/tegra-ahb.c
+++ b/drivers/amba/tegra-ahb.c
@@ -256,8 +256,6 @@ static int tegra_ahb_probe(struct platform_device *pdev)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
ahb->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(ahb->regs))
return PTR_ERR(ahb->regs);
diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
index 962fd35cbd8d..5a86da97a70b 100644
--- a/drivers/bus/arm-cci.c
+++ b/drivers/bus/arm-cci.c
@@ -31,7 +31,6 @@
#define DRIVER_NAME "CCI-400"
#define DRIVER_NAME_PMU DRIVER_NAME " PMU"
-#define PMU_NAME "CCI_400"
#define CCI_PORT_CTRL 0x0
#define CCI_CTRL_STATUS 0xc
@@ -88,8 +87,7 @@ static unsigned long cci_ctrl_phys;
#define CCI_REV_R0 0
#define CCI_REV_R1 1
-#define CCI_REV_R0_P4 4
-#define CCI_REV_R1_P2 6
+#define CCI_REV_R1_PX 5
#define CCI_PMU_EVT_SEL 0x000
#define CCI_PMU_CNTR 0x004
@@ -163,6 +161,15 @@ static struct pmu_port_event_ranges port_event_range[] = {
},
};
+/*
+ * Export different PMU names for the different revisions so userspace knows
+ * because the event ids are different
+ */
+static char *const pmu_names[] = {
+ [CCI_REV_R0] = "CCI_400",
+ [CCI_REV_R1] = "CCI_400_r1",
+};
+
struct cci_pmu_drv_data {
void __iomem *base;
struct arm_pmu *cci_pmu;
@@ -193,21 +200,16 @@ static int probe_cci_revision(void)
rev = readl_relaxed(cci_ctrl_base + CCI_PID2) & CCI_PID2_REV_MASK;
rev >>= CCI_PID2_REV_SHIFT;
- if (rev <= CCI_REV_R0_P4)
+ if (rev < CCI_REV_R1_PX)
return CCI_REV_R0;
- else if (rev <= CCI_REV_R1_P2)
+ else
return CCI_REV_R1;
-
- return -ENOENT;
}
static struct pmu_port_event_ranges *port_range_by_rev(void)
{
int rev = probe_cci_revision();
- if (rev < 0)
- return NULL;
-
return &port_event_range[rev];
}
@@ -526,7 +528,7 @@ static void pmu_write_counter(struct perf_event *event, u32 value)
static int cci_pmu_init(struct arm_pmu *cci_pmu, struct platform_device *pdev)
{
*cci_pmu = (struct arm_pmu){
- .name = PMU_NAME,
+ .name = pmu_names[probe_cci_revision()],
.max_period = (1LLU << 32) - 1,
.get_hw_events = pmu_get_hw_events,
.get_event_idx = pmu_get_event_idx,
diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c
index 2ac754e18bcf..293e2e0a0a87 100644
--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -890,13 +890,12 @@ int __init mvebu_mbus_dt_init(void)
const __be32 *prop;
int ret;
- np = of_find_matching_node(NULL, of_mvebu_mbus_ids);
+ np = of_find_matching_node_and_match(NULL, of_mvebu_mbus_ids, &of_id);
if (!np) {
pr_err("could not find a matching SoC family\n");
return -ENODEV;
}
- of_id = of_match_node(of_mvebu_mbus_ids, np);
mbus_state.soc = of_id->data;
prop = of_get_property(np, "controller", NULL);
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 2f2b08457c67..244759bbd7b7 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -342,11 +342,11 @@ config HW_RANDOM_TPM
If unsure, say Y.
config HW_RANDOM_MSM
- tristate "Qualcomm MSM Random Number Generator support"
- depends on HW_RANDOM && ARCH_MSM
+ tristate "Qualcomm SoCs Random Number Generator support"
+ depends on HW_RANDOM && ARCH_QCOM
---help---
This driver provides kernel-side support for the Random Number
- Generator hardware found on Qualcomm MSM SoCs.
+ Generator hardware found on Qualcomm SoCs.
To compile this driver as a module, choose M here. the
module will be called msm-rng.
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 7641965d208d..f9f605695e40 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -111,4 +111,5 @@ source "drivers/clk/qcom/Kconfig"
endmenu
+source "drivers/clk/bcm/Kconfig"
source "drivers/clk/mvebu/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index a367a9831717..88af4a399d6c 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o
obj-$(CONFIG_COMMON_CLK_AT91) += at91/
+obj-$(CONFIG_ARCH_BCM_MOBILE) += bcm/
obj-$(CONFIG_ARCH_HI3xxx) += hisilicon/
obj-$(CONFIG_COMMON_CLK_KEYSTONE) += keystone/
ifeq ($(CONFIG_COMMON_CLK), y)
diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
new file mode 100644
index 000000000000..a7262fb8ce55
--- /dev/null
+++ b/drivers/clk/bcm/Kconfig
@@ -0,0 +1,9 @@
+config CLK_BCM_KONA
+ bool "Broadcom Kona CCU clock support"
+ depends on ARCH_BCM_MOBILE
+ depends on COMMON_CLK
+ default y
+ help
+ Enable common clock framework support for Broadcom SoCs
+ using "Kona" style clock control units, including those
+ in the BCM281xx family.
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
new file mode 100644
index 000000000000..cf93359aa862
--- /dev/null
+++ b/drivers/clk/bcm/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_CLK_BCM_KONA) += clk-kona.o
+obj-$(CONFIG_CLK_BCM_KONA) += clk-kona-setup.o
+obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o
diff --git a/drivers/clk/bcm/clk-bcm281xx.c b/drivers/clk/bcm/clk-bcm281xx.c
new file mode 100644
index 000000000000..3c66de696aeb
--- /dev/null
+++ b/drivers/clk/bcm/clk-bcm281xx.c
@@ -0,0 +1,416 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "clk-kona.h"
+#include "dt-bindings/clock/bcm281xx.h"
+
+/* bcm11351 CCU device tree "compatible" strings */
+#define BCM11351_DT_ROOT_CCU_COMPAT "brcm,bcm11351-root-ccu"
+#define BCM11351_DT_AON_CCU_COMPAT "brcm,bcm11351-aon-ccu"
+#define BCM11351_DT_HUB_CCU_COMPAT "brcm,bcm11351-hub-ccu"
+#define BCM11351_DT_MASTER_CCU_COMPAT "brcm,bcm11351-master-ccu"
+#define BCM11351_DT_SLAVE_CCU_COMPAT "brcm,bcm11351-slave-ccu"
+
+/* Root CCU clocks */
+
+static struct peri_clk_data frac_1m_data = {
+ .gate = HW_SW_GATE(0x214, 16, 0, 1),
+ .trig = TRIGGER(0x0e04, 0),
+ .div = FRAC_DIVIDER(0x0e00, 0, 22, 16),
+ .clocks = CLOCKS("ref_crystal"),
+};
+
+/* AON CCU clocks */
+
+static struct peri_clk_data hub_timer_data = {
+ .gate = HW_SW_GATE(0x0414, 16, 0, 1),
+ .clocks = CLOCKS("bbl_32k",
+ "frac_1m",
+ "dft_19_5m"),
+ .sel = SELECTOR(0x0a10, 0, 2),
+ .trig = TRIGGER(0x0a40, 4),
+};
+
+static struct peri_clk_data pmu_bsc_data = {
+ .gate = HW_SW_GATE(0x0418, 16, 0, 1),
+ .clocks = CLOCKS("ref_crystal",
+ "pmu_bsc_var",
+ "bbl_32k"),
+ .sel = SELECTOR(0x0a04, 0, 2),
+ .div = DIVIDER(0x0a04, 3, 4),
+ .trig = TRIGGER(0x0a40, 0),
+};
+
+static struct peri_clk_data pmu_bsc_var_data = {
+ .clocks = CLOCKS("var_312m",
+ "ref_312m"),
+ .sel = SELECTOR(0x0a00, 0, 2),
+ .div = DIVIDER(0x0a00, 4, 5),
+ .trig = TRIGGER(0x0a40, 2),
+};
+
+/* Hub CCU clocks */
+
+static struct peri_clk_data tmon_1m_data = {
+ .gate = HW_SW_GATE(0x04a4, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "frac_1m"),
+ .sel = SELECTOR(0x0e74, 0, 2),
+ .trig = TRIGGER(0x0e84, 1),
+};
+
+/* Master CCU clocks */
+
+static struct peri_clk_data sdio1_data = {
+ .gate = HW_SW_GATE(0x0358, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_52m",
+ "ref_52m",
+ "var_96m",
+ "ref_96m"),
+ .sel = SELECTOR(0x0a28, 0, 3),
+ .div = DIVIDER(0x0a28, 4, 14),
+ .trig = TRIGGER(0x0afc, 9),
+};
+
+static struct peri_clk_data sdio2_data = {
+ .gate = HW_SW_GATE(0x035c, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_52m",
+ "ref_52m",
+ "var_96m",
+ "ref_96m"),
+ .sel = SELECTOR(0x0a2c, 0, 3),
+ .div = DIVIDER(0x0a2c, 4, 14),
+ .trig = TRIGGER(0x0afc, 10),
+};
+
+static struct peri_clk_data sdio3_data = {
+ .gate = HW_SW_GATE(0x0364, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_52m",
+ "ref_52m",
+ "var_96m",
+ "ref_96m"),
+ .sel = SELECTOR(0x0a34, 0, 3),
+ .div = DIVIDER(0x0a34, 4, 14),
+ .trig = TRIGGER(0x0afc, 12),
+};
+
+static struct peri_clk_data sdio4_data = {
+ .gate = HW_SW_GATE(0x0360, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_52m",
+ "ref_52m",
+ "var_96m",
+ "ref_96m"),
+ .sel = SELECTOR(0x0a30, 0, 3),
+ .div = DIVIDER(0x0a30, 4, 14),
+ .trig = TRIGGER(0x0afc, 11),
+};
+
+static struct peri_clk_data usb_ic_data = {
+ .gate = HW_SW_GATE(0x0354, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_96m",
+ "ref_96m"),
+ .div = FIXED_DIVIDER(2),
+ .sel = SELECTOR(0x0a24, 0, 2),
+ .trig = TRIGGER(0x0afc, 7),
+};
+
+/* also called usbh_48m */
+static struct peri_clk_data hsic2_48m_data = {
+ .gate = HW_SW_GATE(0x0370, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_96m",
+ "ref_96m"),
+ .sel = SELECTOR(0x0a38, 0, 2),
+ .div = FIXED_DIVIDER(2),
+ .trig = TRIGGER(0x0afc, 5),
+};
+
+/* also called usbh_12m */
+static struct peri_clk_data hsic2_12m_data = {
+ .gate = HW_SW_GATE(0x0370, 20, 4, 5),
+ .div = DIVIDER(0x0a38, 12, 2),
+ .clocks = CLOCKS("ref_crystal",
+ "var_96m",
+ "ref_96m"),
+ .pre_div = FIXED_DIVIDER(2),
+ .sel = SELECTOR(0x0a38, 0, 2),
+ .trig = TRIGGER(0x0afc, 5),
+};
+
+/* Slave CCU clocks */
+
+static struct peri_clk_data uartb_data = {
+ .gate = HW_SW_GATE(0x0400, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_156m",
+ "ref_156m"),
+ .sel = SELECTOR(0x0a10, 0, 2),
+ .div = FRAC_DIVIDER(0x0a10, 4, 12, 8),
+ .trig = TRIGGER(0x0afc, 2),
+};
+
+static struct peri_clk_data uartb2_data = {
+ .gate = HW_SW_GATE(0x0404, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_156m",
+ "ref_156m"),
+ .sel = SELECTOR(0x0a14, 0, 2),
+ .div = FRAC_DIVIDER(0x0a14, 4, 12, 8),
+ .trig = TRIGGER(0x0afc, 3),
+};
+
+static struct peri_clk_data uartb3_data = {
+ .gate = HW_SW_GATE(0x0408, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_156m",
+ "ref_156m"),
+ .sel = SELECTOR(0x0a18, 0, 2),
+ .div = FRAC_DIVIDER(0x0a18, 4, 12, 8),
+ .trig = TRIGGER(0x0afc, 4),
+};
+
+static struct peri_clk_data uartb4_data = {
+ .gate = HW_SW_GATE(0x0408, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_156m",
+ "ref_156m"),
+ .sel = SELECTOR(0x0a1c, 0, 2),
+ .div = FRAC_DIVIDER(0x0a1c, 4, 12, 8),
+ .trig = TRIGGER(0x0afc, 5),
+};
+
+static struct peri_clk_data ssp0_data = {
+ .gate = HW_SW_GATE(0x0410, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_104m",
+ "ref_104m",
+ "var_96m",
+ "ref_96m"),
+ .sel = SELECTOR(0x0a20, 0, 3),
+ .div = DIVIDER(0x0a20, 4, 14),
+ .trig = TRIGGER(0x0afc, 6),
+};
+
+static struct peri_clk_data ssp2_data = {
+ .gate = HW_SW_GATE(0x0418, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_104m",
+ "ref_104m",
+ "var_96m",
+ "ref_96m"),
+ .sel = SELECTOR(0x0a28, 0, 3),
+ .div = DIVIDER(0x0a28, 4, 14),
+ .trig = TRIGGER(0x0afc, 8),
+};
+
+static struct peri_clk_data bsc1_data = {
+ .gate = HW_SW_GATE(0x0458, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_104m",
+ "ref_104m",
+ "var_13m",
+ "ref_13m"),
+ .sel = SELECTOR(0x0a64, 0, 3),
+ .trig = TRIGGER(0x0afc, 23),
+};
+
+static struct peri_clk_data bsc2_data = {
+ .gate = HW_SW_GATE(0x045c, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_104m",
+ "ref_104m",
+ "var_13m",
+ "ref_13m"),
+ .sel = SELECTOR(0x0a68, 0, 3),
+ .trig = TRIGGER(0x0afc, 24),
+};
+
+static struct peri_clk_data bsc3_data = {
+ .gate = HW_SW_GATE(0x0484, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_104m",
+ "ref_104m",
+ "var_13m",
+ "ref_13m"),
+ .sel = SELECTOR(0x0a84, 0, 3),
+ .trig = TRIGGER(0x0b00, 2),
+};
+
+static struct peri_clk_data pwm_data = {
+ .gate = HW_SW_GATE(0x0468, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_104m"),
+ .sel = SELECTOR(0x0a70, 0, 2),
+ .div = DIVIDER(0x0a70, 4, 3),
+ .trig = TRIGGER(0x0afc, 15),
+};
+
+/*
+ * CCU setup routines
+ *
+ * These are called from kona_dt_ccu_setup() to initialize the array
+ * of clocks provided by the CCU. Once allocated, the entries in
+ * the array are initialized by calling kona_clk_setup() with the
+ * initialization data for each clock. They return 0 if successful
+ * or an error code otherwise.
+ */
+static int __init bcm281xx_root_ccu_clks_setup(struct ccu_data *ccu)
+{
+ struct clk **clks;
+ size_t count = BCM281XX_ROOT_CCU_CLOCK_COUNT;
+
+ clks = kzalloc(count * sizeof(*clks), GFP_KERNEL);
+ if (!clks) {
+ pr_err("%s: failed to allocate root clocks\n", __func__);
+ return -ENOMEM;
+ }
+ ccu->data.clks = clks;
+ ccu->data.clk_num = count;
+
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_ROOT_CCU_FRAC_1M, frac_1m);
+
+ return 0;
+}
+
+static int __init bcm281xx_aon_ccu_clks_setup(struct ccu_data *ccu)
+{
+ struct clk **clks;
+ size_t count = BCM281XX_AON_CCU_CLOCK_COUNT;
+
+ clks = kzalloc(count * sizeof(*clks), GFP_KERNEL);
+ if (!clks) {
+ pr_err("%s: failed to allocate aon clocks\n", __func__);
+ return -ENOMEM;
+ }
+ ccu->data.clks = clks;
+ ccu->data.clk_num = count;
+
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_AON_CCU_HUB_TIMER, hub_timer);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_AON_CCU_PMU_BSC, pmu_bsc);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_AON_CCU_PMU_BSC_VAR, pmu_bsc_var);
+
+ return 0;
+}
+
+static int __init bcm281xx_hub_ccu_clks_setup(struct ccu_data *ccu)
+{
+ struct clk **clks;
+ size_t count = BCM281XX_HUB_CCU_CLOCK_COUNT;
+
+ clks = kzalloc(count * sizeof(*clks), GFP_KERNEL);
+ if (!clks) {
+ pr_err("%s: failed to allocate hub clocks\n", __func__);
+ return -ENOMEM;
+ }
+ ccu->data.clks = clks;
+ ccu->data.clk_num = count;
+
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_HUB_CCU_TMON_1M, tmon_1m);
+
+ return 0;
+}
+
+static int __init bcm281xx_master_ccu_clks_setup(struct ccu_data *ccu)
+{
+ struct clk **clks;
+ size_t count = BCM281XX_MASTER_CCU_CLOCK_COUNT;
+
+ clks = kzalloc(count * sizeof(*clks), GFP_KERNEL);
+ if (!clks) {
+ pr_err("%s: failed to allocate master clocks\n", __func__);
+ return -ENOMEM;
+ }
+ ccu->data.clks = clks;
+ ccu->data.clk_num = count;
+
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO1, sdio1);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO2, sdio2);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO3, sdio3);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO4, sdio4);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_USB_IC, usb_ic);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_HSIC2_48M, hsic2_48m);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_HSIC2_12M, hsic2_12m);
+
+ return 0;
+}
+
+static int __init bcm281xx_slave_ccu_clks_setup(struct ccu_data *ccu)
+{
+ struct clk **clks;
+ size_t count = BCM281XX_SLAVE_CCU_CLOCK_COUNT;
+
+ clks = kzalloc(count * sizeof(*clks), GFP_KERNEL);
+ if (!clks) {
+ pr_err("%s: failed to allocate slave clocks\n", __func__);
+ return -ENOMEM;
+ }
+ ccu->data.clks = clks;
+ ccu->data.clk_num = count;
+
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB, uartb);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB2, uartb2);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB3, uartb3);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB4, uartb4);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_SSP0, ssp0);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_SSP2, ssp2);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_BSC1, bsc1);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_BSC2, bsc2);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_BSC3, bsc3);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_PWM, pwm);
+
+ return 0;
+}
+
+/* Device tree match table callback functions */
+
+static void __init kona_dt_root_ccu_setup(struct device_node *node)
+{
+ kona_dt_ccu_setup(node, bcm281xx_root_ccu_clks_setup);
+}
+
+static void __init kona_dt_aon_ccu_setup(struct device_node *node)
+{
+ kona_dt_ccu_setup(node, bcm281xx_aon_ccu_clks_setup);
+}
+
+static void __init kona_dt_hub_ccu_setup(struct device_node *node)
+{
+ kona_dt_ccu_setup(node, bcm281xx_hub_ccu_clks_setup);
+}
+
+static void __init kona_dt_master_ccu_setup(struct device_node *node)
+{
+ kona_dt_ccu_setup(node, bcm281xx_master_ccu_clks_setup);
+}
+
+static void __init kona_dt_slave_ccu_setup(struct device_node *node)
+{
+ kona_dt_ccu_setup(node, bcm281xx_slave_ccu_clks_setup);
+}
+
+CLK_OF_DECLARE(bcm11351_root_ccu, BCM11351_DT_ROOT_CCU_COMPAT,
+ kona_dt_root_ccu_setup);
+CLK_OF_DECLARE(bcm11351_aon_ccu, BCM11351_DT_AON_CCU_COMPAT,
+ kona_dt_aon_ccu_setup);
+CLK_OF_DECLARE(bcm11351_hub_ccu, BCM11351_DT_HUB_CCU_COMPAT,
+ kona_dt_hub_ccu_setup);
+CLK_OF_DECLARE(bcm11351_master_ccu, BCM11351_DT_MASTER_CCU_COMPAT,
+ kona_dt_master_ccu_setup);
+CLK_OF_DECLARE(bcm11351_slave_ccu, BCM11351_DT_SLAVE_CCU_COMPAT,
+ kona_dt_slave_ccu_setup);
diff --git a/drivers/clk/bcm/clk-kona-setup.c b/drivers/clk/bcm/clk-kona-setup.c
new file mode 100644
index 000000000000..c7607feb18dd
--- /dev/null
+++ b/drivers/clk/bcm/clk-kona-setup.c
@@ -0,0 +1,769 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/of_address.h>
+
+#include "clk-kona.h"
+
+/* These are used when a selector or trigger is found to be unneeded */
+#define selector_clear_exists(sel) ((sel)->width = 0)
+#define trigger_clear_exists(trig) FLAG_CLEAR(trig, TRIG, EXISTS)
+
+LIST_HEAD(ccu_list); /* The list of set up CCUs */
+
+/* Validity checking */
+
+static bool clk_requires_trigger(struct kona_clk *bcm_clk)
+{
+ struct peri_clk_data *peri = bcm_clk->peri;
+ struct bcm_clk_sel *sel;
+ struct bcm_clk_div *div;
+
+ if (bcm_clk->type != bcm_clk_peri)
+ return false;
+
+ sel = &peri->sel;
+ if (sel->parent_count && selector_exists(sel))
+ return true;
+
+ div = &peri->div;
+ if (!divider_exists(div))
+ return false;
+
+ /* Fixed dividers don't need triggers */
+ if (!divider_is_fixed(div))
+ return true;
+
+ div = &peri->pre_div;
+
+ return divider_exists(div) && !divider_is_fixed(div);
+}
+
+static bool peri_clk_data_offsets_valid(struct kona_clk *bcm_clk)
+{
+ struct peri_clk_data *peri;
+ struct bcm_clk_gate *gate;
+ struct bcm_clk_div *div;
+ struct bcm_clk_sel *sel;
+ struct bcm_clk_trig *trig;
+ const char *name;
+ u32 range;
+ u32 limit;
+
+ BUG_ON(bcm_clk->type != bcm_clk_peri);
+ peri = bcm_clk->peri;
+ name = bcm_clk->name;
+ range = bcm_clk->ccu->range;
+
+ limit = range - sizeof(u32);
+ limit = round_down(limit, sizeof(u32));
+
+ gate = &peri->gate;
+ if (gate_exists(gate)) {
+ if (gate->offset > limit) {
+ pr_err("%s: bad gate offset for %s (%u > %u)\n",
+ __func__, name, gate->offset, limit);
+ return false;
+ }
+ }
+
+ div = &peri->div;
+ if (divider_exists(div)) {
+ if (div->offset > limit) {
+ pr_err("%s: bad divider offset for %s (%u > %u)\n",
+ __func__, name, div->offset, limit);
+ return false;
+ }
+ }
+
+ div = &peri->pre_div;
+ if (divider_exists(div)) {
+ if (div->offset > limit) {
+ pr_err("%s: bad pre-divider offset for %s "
+ "(%u > %u)\n",
+ __func__, name, div->offset, limit);
+ return false;
+ }
+ }
+
+ sel = &peri->sel;
+ if (selector_exists(sel)) {
+ if (sel->offset > limit) {
+ pr_err("%s: bad selector offset for %s (%u > %u)\n",
+ __func__, name, sel->offset, limit);
+ return false;
+ }
+ }
+
+ trig = &peri->trig;
+ if (trigger_exists(trig)) {
+ if (trig->offset > limit) {
+ pr_err("%s: bad trigger offset for %s (%u > %u)\n",
+ __func__, name, trig->offset, limit);
+ return false;
+ }
+ }
+
+ trig = &peri->pre_trig;
+ if (trigger_exists(trig)) {
+ if (trig->offset > limit) {
+ pr_err("%s: bad pre-trigger offset for %s (%u > %u)\n",
+ __func__, name, trig->offset, limit);
+ return false;
+ }
+ }
+
+ return true;
+}
+
+/* A bit position must be less than the number of bits in a 32-bit register. */
+static bool bit_posn_valid(u32 bit_posn, const char *field_name,
+ const char *clock_name)
+{
+ u32 limit = BITS_PER_BYTE * sizeof(u32) - 1;
+
+ if (bit_posn > limit) {
+ pr_err("%s: bad %s bit for %s (%u > %u)\n", __func__,
+ field_name, clock_name, bit_posn, limit);
+ return false;
+ }
+ return true;
+}
+
+/*
+ * A bitfield must be at least 1 bit wide. Both the low-order and
+ * high-order bits must lie within a 32-bit register. We require
+ * fields to be less than 32 bits wide, mainly because we use
+ * shifting to produce field masks, and shifting a full word width
+ * is not well-defined by the C standard.
+ */
+static bool bitfield_valid(u32 shift, u32 width, const char *field_name,
+ const char *clock_name)
+{
+ u32 limit = BITS_PER_BYTE * sizeof(u32);
+
+ if (!width) {
+ pr_err("%s: bad %s field width 0 for %s\n", __func__,
+ field_name, clock_name);
+ return false;
+ }
+ if (shift + width > limit) {
+ pr_err("%s: bad %s for %s (%u + %u > %u)\n", __func__,
+ field_name, clock_name, shift, width, limit);
+ return false;
+ }
+ return true;
+}
+
+/*
+ * All gates, if defined, have a status bit, and for hardware-only
+ * gates, that's it. Gates that can be software controlled also
+ * have an enable bit. And a gate that can be hardware or software
+ * controlled will have a hardware/software select bit.
+ */
+static bool gate_valid(struct bcm_clk_gate *gate, const char *field_name,
+ const char *clock_name)
+{
+ if (!bit_posn_valid(gate->status_bit, "gate status", clock_name))
+ return false;
+
+ if (gate_is_sw_controllable(gate)) {
+ if (!bit_posn_valid(gate->en_bit, "gate enable", clock_name))
+ return false;
+
+ if (gate_is_hw_controllable(gate)) {
+ if (!bit_posn_valid(gate->hw_sw_sel_bit,
+ "gate hw/sw select",
+ clock_name))
+ return false;
+ }
+ } else {
+ BUG_ON(!gate_is_hw_controllable(gate));
+ }
+
+ return true;
+}
+
+/*
+ * A selector bitfield must be valid. Its parent_sel array must
+ * also be reasonable for the field.
+ */
+static bool sel_valid(struct bcm_clk_sel *sel, const char *field_name,
+ const char *clock_name)
+{
+ if (!bitfield_valid(sel->shift, sel->width, field_name, clock_name))
+ return false;
+
+ if (sel->parent_count) {
+ u32 max_sel;
+ u32 limit;
+
+ /*
+ * Make sure the selector field can hold all the
+ * selector values we expect to be able to use. A
+ * clock only needs to have a selector defined if it
+ * has more than one parent. And in that case the
+ * highest selector value will be in the last entry
+ * in the array.
+ */
+ max_sel = sel->parent_sel[sel->parent_count - 1];
+ limit = (1 << sel->width) - 1;
+ if (max_sel > limit) {
+ pr_err("%s: bad selector for %s "
+ "(%u needs > %u bits)\n",
+ __func__, clock_name, max_sel,
+ sel->width);
+ return false;
+ }
+ } else {
+ pr_warn("%s: ignoring selector for %s (no parents)\n",
+ __func__, clock_name);
+ selector_clear_exists(sel);
+ kfree(sel->parent_sel);
+ sel->parent_sel = NULL;
+ }
+
+ return true;
+}
+
+/*
+ * A fixed divider just needs to be non-zero. A variable divider
+ * has to have a valid divider bitfield, and if it has a fraction,
+ * the width of the fraction must not be no more than the width of
+ * the divider as a whole.
+ */
+static bool div_valid(struct bcm_clk_div *div, const char *field_name,
+ const char *clock_name)
+{
+ if (divider_is_fixed(div)) {
+ /* Any fixed divider value but 0 is OK */
+ if (div->fixed == 0) {
+ pr_err("%s: bad %s fixed value 0 for %s\n", __func__,
+ field_name, clock_name);
+ return false;
+ }
+ return true;
+ }
+ if (!bitfield_valid(div->shift, div->width, field_name, clock_name))
+ return false;
+
+ if (divider_has_fraction(div))
+ if (div->frac_width > div->width) {
+ pr_warn("%s: bad %s fraction width for %s (%u > %u)\n",
+ __func__, field_name, clock_name,
+ div->frac_width, div->width);
+ return false;
+ }
+
+ return true;
+}
+
+/*
+ * If a clock has two dividers, the combined number of fractional
+ * bits must be representable in a 32-bit unsigned value. This
+ * is because we scale up a dividend using both dividers before
+ * dividing to improve accuracy, and we need to avoid overflow.
+ */
+static bool kona_dividers_valid(struct kona_clk *bcm_clk)
+{
+ struct peri_clk_data *peri = bcm_clk->peri;
+ struct bcm_clk_div *div;
+ struct bcm_clk_div *pre_div;
+ u32 limit;
+
+ BUG_ON(bcm_clk->type != bcm_clk_peri);
+
+ if (!divider_exists(&peri->div) || !divider_exists(&peri->pre_div))
+ return true;
+
+ div = &peri->div;
+ pre_div = &peri->pre_div;
+ if (divider_is_fixed(div) || divider_is_fixed(pre_div))
+ return true;
+
+ limit = BITS_PER_BYTE * sizeof(u32);
+
+ return div->frac_width + pre_div->frac_width <= limit;
+}
+
+
+/* A trigger just needs to represent a valid bit position */
+static bool trig_valid(struct bcm_clk_trig *trig, const char *field_name,
+ const char *clock_name)
+{
+ return bit_posn_valid(trig->bit, field_name, clock_name);
+}
+
+/* Determine whether the set of peripheral clock registers are valid. */
+static bool
+peri_clk_data_valid(struct kona_clk *bcm_clk)
+{
+ struct peri_clk_data *peri;
+ struct bcm_clk_gate *gate;
+ struct bcm_clk_sel *sel;
+ struct bcm_clk_div *div;
+ struct bcm_clk_div *pre_div;
+ struct bcm_clk_trig *trig;
+ const char *name;
+
+ BUG_ON(bcm_clk->type != bcm_clk_peri);
+
+ /*
+ * First validate register offsets. This is the only place
+ * where we need something from the ccu, so we do these
+ * together.
+ */
+ if (!peri_clk_data_offsets_valid(bcm_clk))
+ return false;
+
+ peri = bcm_clk->peri;
+ name = bcm_clk->name;
+ gate = &peri->gate;
+ if (gate_exists(gate) && !gate_valid(gate, "gate", name))
+ return false;
+
+ sel = &peri->sel;
+ if (selector_exists(sel)) {
+ if (!sel_valid(sel, "selector", name))
+ return false;
+
+ } else if (sel->parent_count > 1) {
+ pr_err("%s: multiple parents but no selector for %s\n",
+ __func__, name);
+
+ return false;
+ }
+
+ div = &peri->div;
+ pre_div = &peri->pre_div;
+ if (divider_exists(div)) {
+ if (!div_valid(div, "divider", name))
+ return false;
+
+ if (divider_exists(pre_div))
+ if (!div_valid(pre_div, "pre-divider", name))
+ return false;
+ } else if (divider_exists(pre_div)) {
+ pr_err("%s: pre-divider but no divider for %s\n", __func__,
+ name);
+ return false;
+ }
+
+ trig = &peri->trig;
+ if (trigger_exists(trig)) {
+ if (!trig_valid(trig, "trigger", name))
+ return false;
+
+ if (trigger_exists(&peri->pre_trig)) {
+ if (!trig_valid(trig, "pre-trigger", name)) {
+ return false;
+ }
+ }
+ if (!clk_requires_trigger(bcm_clk)) {
+ pr_warn("%s: ignoring trigger for %s (not needed)\n",
+ __func__, name);
+ trigger_clear_exists(trig);
+ }
+ } else if (trigger_exists(&peri->pre_trig)) {
+ pr_err("%s: pre-trigger but no trigger for %s\n", __func__,
+ name);
+ return false;
+ } else if (clk_requires_trigger(bcm_clk)) {
+ pr_err("%s: required trigger missing for %s\n", __func__,
+ name);
+ return false;
+ }
+
+ return kona_dividers_valid(bcm_clk);
+}
+
+static bool kona_clk_valid(struct kona_clk *bcm_clk)
+{
+ switch (bcm_clk->type) {
+ case bcm_clk_peri:
+ if (!peri_clk_data_valid(bcm_clk))
+ return false;
+ break;
+ default:
+ pr_err("%s: unrecognized clock type (%d)\n", __func__,
+ (int)bcm_clk->type);
+ return false;
+ }
+ return true;
+}
+
+/*
+ * Scan an array of parent clock names to determine whether there
+ * are any entries containing BAD_CLK_NAME. Such entries are
+ * placeholders for non-supported clocks. Keep track of the
+ * position of each clock name in the original array.
+ *
+ * Allocates an array of pointers to to hold the names of all
+ * non-null entries in the original array, and returns a pointer to
+ * that array in *names. This will be used for registering the
+ * clock with the common clock code. On successful return,
+ * *count indicates how many entries are in that names array.
+ *
+ * If there is more than one entry in the resulting names array,
+ * another array is allocated to record the parent selector value
+ * for each (defined) parent clock. This is the value that
+ * represents this parent clock in the clock's source selector
+ * register. The position of the clock in the original parent array
+ * defines that selector value. The number of entries in this array
+ * is the same as the number of entries in the parent names array.
+ *
+ * The array of selector values is returned. If the clock has no
+ * parents, no selector is required and a null pointer is returned.
+ *
+ * Returns a null pointer if the clock names array supplied was
+ * null. (This is not an error.)
+ *
+ * Returns a pointer-coded error if an error occurs.
+ */
+static u32 *parent_process(const char *clocks[],
+ u32 *count, const char ***names)
+{
+ static const char **parent_names;
+ static u32 *parent_sel;
+ const char **clock;
+ u32 parent_count;
+ u32 bad_count = 0;
+ u32 orig_count;
+ u32 i;
+ u32 j;
+
+ *count = 0; /* In case of early return */
+ *names = NULL;
+ if (!clocks)
+ return NULL;
+
+ /*
+ * Count the number of names in the null-terminated array,
+ * and find out how many of those are actually clock names.
+ */
+ for (clock = clocks; *clock; clock++)
+ if (*clock == BAD_CLK_NAME)
+ bad_count++;
+ orig_count = (u32)(clock - clocks);
+ parent_count = orig_count - bad_count;
+
+ /* If all clocks are unsupported, we treat it as no clock */
+ if (!parent_count)
+ return NULL;
+
+ /* Avoid exceeding our parent clock limit */
+ if (parent_count > PARENT_COUNT_MAX) {
+ pr_err("%s: too many parents (%u > %u)\n", __func__,
+ parent_count, PARENT_COUNT_MAX);
+ return ERR_PTR(-EINVAL);
+ }
+
+ /*
+ * There is one parent name for each defined parent clock.
+ * We also maintain an array containing the selector value
+ * for each defined clock. If there's only one clock, the
+ * selector is not required, but we allocate space for the
+ * array anyway to keep things simple.
+ */
+ parent_names = kmalloc(parent_count * sizeof(parent_names), GFP_KERNEL);
+ if (!parent_names) {
+ pr_err("%s: error allocating %u parent names\n", __func__,
+ parent_count);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* There is at least one parent, so allocate a selector array */
+
+ parent_sel = kmalloc(parent_count * sizeof(*parent_sel), GFP_KERNEL);
+ if (!parent_sel) {
+ pr_err("%s: error allocating %u parent selectors\n", __func__,
+ parent_count);
+ kfree(parent_names);
+
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* Now fill in the parent names and selector arrays */
+ for (i = 0, j = 0; i < orig_count; i++) {
+ if (clocks[i] != BAD_CLK_NAME) {
+ parent_names[j] = clocks[i];
+ parent_sel[j] = i;
+ j++;
+ }
+ }
+ *names = parent_names;
+ *count = parent_count;
+
+ return parent_sel;
+}
+
+static int
+clk_sel_setup(const char **clocks, struct bcm_clk_sel *sel,
+ struct clk_init_data *init_data)
+{
+ const char **parent_names = NULL;
+ u32 parent_count = 0;
+ u32 *parent_sel;
+
+ /*
+ * If a peripheral clock has multiple parents, the value
+ * used by the hardware to select that parent is represented
+ * by the parent clock's position in the "clocks" list. Some
+ * values don't have defined or supported clocks; these will
+ * have BAD_CLK_NAME entries in the parents[] array. The
+ * list is terminated by a NULL entry.
+ *
+ * We need to supply (only) the names of defined parent
+ * clocks when registering a clock though, so we use an
+ * array of parent selector values to map between the
+ * indexes the common clock code uses and the selector
+ * values we need.
+ */
+ parent_sel = parent_process(clocks, &parent_count, &parent_names);
+ if (IS_ERR(parent_sel)) {
+ int ret = PTR_ERR(parent_sel);
+
+ pr_err("%s: error processing parent clocks for %s (%d)\n",
+ __func__, init_data->name, ret);
+
+ return ret;
+ }
+
+ init_data->parent_names = parent_names;
+ init_data->num_parents = parent_count;
+
+ sel->parent_count = parent_count;
+ sel->parent_sel = parent_sel;
+
+ return 0;
+}
+
+static void clk_sel_teardown(struct bcm_clk_sel *sel,
+ struct clk_init_data *init_data)
+{
+ kfree(sel->parent_sel);
+ sel->parent_sel = NULL;
+ sel->parent_count = 0;
+
+ init_data->num_parents = 0;
+ kfree(init_data->parent_names);
+ init_data->parent_names = NULL;
+}
+
+static void peri_clk_teardown(struct peri_clk_data *data,
+ struct clk_init_data *init_data)
+{
+ clk_sel_teardown(&data->sel, init_data);
+ init_data->ops = NULL;
+}
+
+/*
+ * Caller is responsible for freeing the parent_names[] and
+ * parent_sel[] arrays in the peripheral clock's "data" structure
+ * that can be assigned if the clock has one or more parent clocks
+ * associated with it.
+ */
+static int peri_clk_setup(struct ccu_data *ccu, struct peri_clk_data *data,
+ struct clk_init_data *init_data)
+{
+ init_data->ops = &kona_peri_clk_ops;
+ init_data->flags = CLK_IGNORE_UNUSED;
+
+ return clk_sel_setup(data->clocks, &data->sel, init_data);
+}
+
+static void bcm_clk_teardown(struct kona_clk *bcm_clk)
+{
+ switch (bcm_clk->type) {
+ case bcm_clk_peri:
+ peri_clk_teardown(bcm_clk->data, &bcm_clk->init_data);
+ break;
+ default:
+ break;
+ }
+ bcm_clk->data = NULL;
+ bcm_clk->type = bcm_clk_none;
+}
+
+static void kona_clk_teardown(struct clk *clk)
+{
+ struct clk_hw *hw;
+ struct kona_clk *bcm_clk;
+
+ if (!clk)
+ return;
+
+ hw = __clk_get_hw(clk);
+ if (!hw) {
+ pr_err("%s: clk %p has null hw pointer\n", __func__, clk);
+ return;
+ }
+ clk_unregister(clk);
+
+ bcm_clk = to_kona_clk(hw);
+ bcm_clk_teardown(bcm_clk);
+}
+
+struct clk *kona_clk_setup(struct ccu_data *ccu, const char *name,
+ enum bcm_clk_type type, void *data)
+{
+ struct kona_clk *bcm_clk;
+ struct clk_init_data *init_data;
+ struct clk *clk = NULL;
+
+ bcm_clk = kzalloc(sizeof(*bcm_clk), GFP_KERNEL);
+ if (!bcm_clk) {
+ pr_err("%s: failed to allocate bcm_clk for %s\n", __func__,
+ name);
+ return NULL;
+ }
+ bcm_clk->ccu = ccu;
+ bcm_clk->name = name;
+
+ init_data = &bcm_clk->init_data;
+ init_data->name = name;
+ switch (type) {
+ case bcm_clk_peri:
+ if (peri_clk_setup(ccu, data, init_data))
+ goto out_free;
+ break;
+ default:
+ data = NULL;
+ break;
+ }
+ bcm_clk->type = type;
+ bcm_clk->data = data;
+
+ /* Make sure everything makes sense before we set it up */
+ if (!kona_clk_valid(bcm_clk)) {
+ pr_err("%s: clock data invalid for %s\n", __func__, name);
+ goto out_teardown;
+ }
+
+ bcm_clk->hw.init = init_data;
+ clk = clk_register(NULL, &bcm_clk->hw);
+ if (IS_ERR(clk)) {
+ pr_err("%s: error registering clock %s (%ld)\n", __func__,
+ name, PTR_ERR(clk));
+ goto out_teardown;
+ }
+ BUG_ON(!clk);
+
+ return clk;
+out_teardown:
+ bcm_clk_teardown(bcm_clk);
+out_free:
+ kfree(bcm_clk);
+
+ return NULL;
+}
+
+static void ccu_clks_teardown(struct ccu_data *ccu)
+{
+ u32 i;
+
+ for (i = 0; i < ccu->data.clk_num; i++)
+ kona_clk_teardown(ccu->data.clks[i]);
+ kfree(ccu->data.clks);
+}
+
+static void kona_ccu_teardown(struct ccu_data *ccu)
+{
+ if (!ccu)
+ return;
+
+ if (!ccu->base)
+ goto done;
+
+ of_clk_del_provider(ccu->node); /* safe if never added */
+ ccu_clks_teardown(ccu);
+ list_del(&ccu->links);
+ of_node_put(ccu->node);
+ iounmap(ccu->base);
+done:
+ kfree(ccu->name);
+ kfree(ccu);
+}
+
+/*
+ * Set up a CCU. Call the provided ccu_clks_setup callback to
+ * initialize the array of clocks provided by the CCU.
+ */
+void __init kona_dt_ccu_setup(struct device_node *node,
+ int (*ccu_clks_setup)(struct ccu_data *))
+{
+ struct ccu_data *ccu;
+ struct resource res = { 0 };
+ resource_size_t range;
+ int ret;
+
+ ccu = kzalloc(sizeof(*ccu), GFP_KERNEL);
+ if (ccu)
+ ccu->name = kstrdup(node->name, GFP_KERNEL);
+ if (!ccu || !ccu->name) {
+ pr_err("%s: unable to allocate CCU struct for %s\n",
+ __func__, node->name);
+ kfree(ccu);
+
+ return;
+ }
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret) {
+ pr_err("%s: no valid CCU registers found for %s\n", __func__,
+ node->name);
+ goto out_err;
+ }
+
+ range = resource_size(&res);
+ if (range > (resource_size_t)U32_MAX) {
+ pr_err("%s: address range too large for %s\n", __func__,
+ node->name);
+ goto out_err;
+ }
+
+ ccu->range = (u32)range;
+ ccu->base = ioremap(res.start, ccu->range);
+ if (!ccu->base) {
+ pr_err("%s: unable to map CCU registers for %s\n", __func__,
+ node->name);
+ goto out_err;
+ }
+
+ spin_lock_init(&ccu->lock);
+ INIT_LIST_HEAD(&ccu->links);
+ ccu->node = of_node_get(node);
+
+ list_add_tail(&ccu->links, &ccu_list);
+
+ /* Set up clocks array (in ccu->data) */
+ if (ccu_clks_setup(ccu))
+ goto out_err;
+
+ ret = of_clk_add_provider(node, of_clk_src_onecell_get, &ccu->data);
+ if (ret) {
+ pr_err("%s: error adding ccu %s as provider (%d)\n", __func__,
+ node->name, ret);
+ goto out_err;
+ }
+
+ if (!kona_ccu_init(ccu))
+ pr_err("Broadcom %s initialization had errors\n", node->name);
+
+ return;
+out_err:
+ kona_ccu_teardown(ccu);
+ pr_err("Broadcom %s setup aborted\n", node->name);
+}
diff --git a/drivers/clk/bcm/clk-kona.c b/drivers/clk/bcm/clk-kona.c
new file mode 100644
index 000000000000..e3d339e08309
--- /dev/null
+++ b/drivers/clk/bcm/clk-kona.c
@@ -0,0 +1,1033 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "clk-kona.h"
+
+#include <linux/delay.h>
+
+#define CCU_ACCESS_PASSWORD 0xA5A500
+#define CLK_GATE_DELAY_LOOP 2000
+
+/* Bitfield operations */
+
+/* Produces a mask of set bits covering a range of a 32-bit value */
+static inline u32 bitfield_mask(u32 shift, u32 width)
+{
+ return ((1 << width) - 1) << shift;
+}
+
+/* Extract the value of a bitfield found within a given register value */
+static inline u32 bitfield_extract(u32 reg_val, u32 shift, u32 width)
+{
+ return (reg_val & bitfield_mask(shift, width)) >> shift;
+}
+
+/* Replace the value of a bitfield found within a given register value */
+static inline u32 bitfield_replace(u32 reg_val, u32 shift, u32 width, u32 val)
+{
+ u32 mask = bitfield_mask(shift, width);
+
+ return (reg_val & ~mask) | (val << shift);
+}
+
+/* Divider and scaling helpers */
+
+/*
+ * Implement DIV_ROUND_CLOSEST() for 64-bit dividend and both values
+ * unsigned. Note that unlike do_div(), the remainder is discarded
+ * and the return value is the quotient (not the remainder).
+ */
+u64 do_div_round_closest(u64 dividend, unsigned long divisor)
+{
+ u64 result;
+
+ result = dividend + ((u64)divisor >> 1);
+ (void)do_div(result, divisor);
+
+ return result;
+}
+
+/* Convert a divider into the scaled divisor value it represents. */
+static inline u64 scaled_div_value(struct bcm_clk_div *div, u32 reg_div)
+{
+ return (u64)reg_div + ((u64)1 << div->frac_width);
+}
+
+/*
+ * Build a scaled divider value as close as possible to the
+ * given whole part (div_value) and fractional part (expressed
+ * in billionths).
+ */
+u64 scaled_div_build(struct bcm_clk_div *div, u32 div_value, u32 billionths)
+{
+ u64 combined;
+
+ BUG_ON(!div_value);
+ BUG_ON(billionths >= BILLION);
+
+ combined = (u64)div_value * BILLION + billionths;
+ combined <<= div->frac_width;
+
+ return do_div_round_closest(combined, BILLION);
+}
+
+/* The scaled minimum divisor representable by a divider */
+static inline u64
+scaled_div_min(struct bcm_clk_div *div)
+{
+ if (divider_is_fixed(div))
+ return (u64)div->fixed;
+
+ return scaled_div_value(div, 0);
+}
+
+/* The scaled maximum divisor representable by a divider */
+u64 scaled_div_max(struct bcm_clk_div *div)
+{
+ u32 reg_div;
+
+ if (divider_is_fixed(div))
+ return (u64)div->fixed;
+
+ reg_div = ((u32)1 << div->width) - 1;
+
+ return scaled_div_value(div, reg_div);
+}
+
+/*
+ * Convert a scaled divisor into its divider representation as
+ * stored in a divider register field.
+ */
+static inline u32
+divider(struct bcm_clk_div *div, u64 scaled_div)
+{
+ BUG_ON(scaled_div < scaled_div_min(div));
+ BUG_ON(scaled_div > scaled_div_max(div));
+
+ return (u32)(scaled_div - ((u64)1 << div->frac_width));
+}
+
+/* Return a rate scaled for use when dividing by a scaled divisor. */
+static inline u64
+scale_rate(struct bcm_clk_div *div, u32 rate)
+{
+ if (divider_is_fixed(div))
+ return (u64)rate;
+
+ return (u64)rate << div->frac_width;
+}
+
+/* CCU access */
+
+/* Read a 32-bit register value from a CCU's address space. */
+static inline u32 __ccu_read(struct ccu_data *ccu, u32 reg_offset)
+{
+ return readl(ccu->base + reg_offset);
+}
+
+/* Write a 32-bit register value into a CCU's address space. */
+static inline void
+__ccu_write(struct ccu_data *ccu, u32 reg_offset, u32 reg_val)
+{
+ writel(reg_val, ccu->base + reg_offset);
+}
+
+static inline unsigned long ccu_lock(struct ccu_data *ccu)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ccu->lock, flags);
+
+ return flags;
+}
+static inline void ccu_unlock(struct ccu_data *ccu, unsigned long flags)
+{
+ spin_unlock_irqrestore(&ccu->lock, flags);
+}
+
+/*
+ * Enable/disable write access to CCU protected registers. The
+ * WR_ACCESS register for all CCUs is at offset 0.
+ */
+static inline void __ccu_write_enable(struct ccu_data *ccu)
+{
+ if (ccu->write_enabled) {
+ pr_err("%s: access already enabled for %s\n", __func__,
+ ccu->name);
+ return;
+ }
+ ccu->write_enabled = true;
+ __ccu_write(ccu, 0, CCU_ACCESS_PASSWORD | 1);
+}
+
+static inline void __ccu_write_disable(struct ccu_data *ccu)
+{
+ if (!ccu->write_enabled) {
+ pr_err("%s: access wasn't enabled for %s\n", __func__,
+ ccu->name);
+ return;
+ }
+
+ __ccu_write(ccu, 0, CCU_ACCESS_PASSWORD);
+ ccu->write_enabled = false;
+}
+
+/*
+ * Poll a register in a CCU's address space, returning when the
+ * specified bit in that register's value is set (or clear). Delay
+ * a microsecond after each read of the register. Returns true if
+ * successful, or false if we gave up trying.
+ *
+ * Caller must ensure the CCU lock is held.
+ */
+static inline bool
+__ccu_wait_bit(struct ccu_data *ccu, u32 reg_offset, u32 bit, bool want)
+{
+ unsigned int tries;
+ u32 bit_mask = 1 << bit;
+
+ for (tries = 0; tries < CLK_GATE_DELAY_LOOP; tries++) {
+ u32 val;
+ bool bit_val;
+
+ val = __ccu_read(ccu, reg_offset);
+ bit_val = (val & bit_mask) != 0;
+ if (bit_val == want)
+ return true;
+ udelay(1);
+ }
+ return false;
+}
+
+/* Gate operations */
+
+/* Determine whether a clock is gated. CCU lock must be held. */
+static bool
+__is_clk_gate_enabled(struct ccu_data *ccu, struct bcm_clk_gate *gate)
+{
+ u32 bit_mask;
+ u32 reg_val;
+
+ /* If there is no gate we can assume it's enabled. */
+ if (!gate_exists(gate))
+ return true;
+
+ bit_mask = 1 << gate->status_bit;
+ reg_val = __ccu_read(ccu, gate->offset);
+
+ return (reg_val & bit_mask) != 0;
+}
+
+/* Determine whether a clock is gated. */
+static bool
+is_clk_gate_enabled(struct ccu_data *ccu, struct bcm_clk_gate *gate)
+{
+ long flags;
+ bool ret;
+
+ /* Avoid taking the lock if we can */
+ if (!gate_exists(gate))
+ return true;
+
+ flags = ccu_lock(ccu);
+ ret = __is_clk_gate_enabled(ccu, gate);
+ ccu_unlock(ccu, flags);
+
+ return ret;
+}
+
+/*
+ * Commit our desired gate state to the hardware.
+ * Returns true if successful, false otherwise.
+ */
+static bool
+__gate_commit(struct ccu_data *ccu, struct bcm_clk_gate *gate)
+{
+ u32 reg_val;
+ u32 mask;
+ bool enabled = false;
+
+ BUG_ON(!gate_exists(gate));
+ if (!gate_is_sw_controllable(gate))
+ return true; /* Nothing we can change */
+
+ reg_val = __ccu_read(ccu, gate->offset);
+
+ /* For a hardware/software gate, set which is in control */
+ if (gate_is_hw_controllable(gate)) {
+ mask = (u32)1 << gate->hw_sw_sel_bit;
+ if (gate_is_sw_managed(gate))
+ reg_val |= mask;
+ else
+ reg_val &= ~mask;
+ }
+
+ /*
+ * If software is in control, enable or disable the gate.
+ * If hardware is, clear the enabled bit for good measure.
+ * If a software controlled gate can't be disabled, we're
+ * required to write a 0 into the enable bit (but the gate
+ * will be enabled).
+ */
+ mask = (u32)1 << gate->en_bit;
+ if (gate_is_sw_managed(gate) && (enabled = gate_is_enabled(gate)) &&
+ !gate_is_no_disable(gate))
+ reg_val |= mask;
+ else
+ reg_val &= ~mask;
+
+ __ccu_write(ccu, gate->offset, reg_val);
+
+ /* For a hardware controlled gate, we're done */
+ if (!gate_is_sw_managed(gate))
+ return true;
+
+ /* Otherwise wait for the gate to be in desired state */
+ return __ccu_wait_bit(ccu, gate->offset, gate->status_bit, enabled);
+}
+
+/*
+ * Initialize a gate. Our desired state (hardware/software select,
+ * and if software, its enable state) is committed to hardware
+ * without the usual checks to see if it's already set up that way.
+ * Returns true if successful, false otherwise.
+ */
+static bool gate_init(struct ccu_data *ccu, struct bcm_clk_gate *gate)
+{
+ if (!gate_exists(gate))
+ return true;
+ return __gate_commit(ccu, gate);
+}
+
+/*
+ * Set a gate to enabled or disabled state. Does nothing if the
+ * gate is not currently under software control, or if it is already
+ * in the requested state. Returns true if successful, false
+ * otherwise. CCU lock must be held.
+ */
+static bool
+__clk_gate(struct ccu_data *ccu, struct bcm_clk_gate *gate, bool enable)
+{
+ bool ret;
+
+ if (!gate_exists(gate) || !gate_is_sw_managed(gate))
+ return true; /* Nothing to do */
+
+ if (!enable && gate_is_no_disable(gate)) {
+ pr_warn("%s: invalid gate disable request (ignoring)\n",
+ __func__);
+ return true;
+ }
+
+ if (enable == gate_is_enabled(gate))
+ return true; /* No change */
+
+ gate_flip_enabled(gate);
+ ret = __gate_commit(ccu, gate);
+ if (!ret)
+ gate_flip_enabled(gate); /* Revert the change */
+
+ return ret;
+}
+
+/* Enable or disable a gate. Returns 0 if successful, -EIO otherwise */
+static int clk_gate(struct ccu_data *ccu, const char *name,
+ struct bcm_clk_gate *gate, bool enable)
+{
+ unsigned long flags;
+ bool success;
+
+ /*
+ * Avoid taking the lock if we can. We quietly ignore
+ * requests to change state that don't make sense.
+ */
+ if (!gate_exists(gate) || !gate_is_sw_managed(gate))
+ return 0;
+ if (!enable && gate_is_no_disable(gate))
+ return 0;
+
+ flags = ccu_lock(ccu);
+ __ccu_write_enable(ccu);
+
+ success = __clk_gate(ccu, gate, enable);
+
+ __ccu_write_disable(ccu);
+ ccu_unlock(ccu, flags);
+
+ if (success)
+ return 0;
+
+ pr_err("%s: failed to %s gate for %s\n", __func__,
+ enable ? "enable" : "disable", name);
+
+ return -EIO;
+}
+
+/* Trigger operations */
+
+/*
+ * Caller must ensure CCU lock is held and access is enabled.
+ * Returns true if successful, false otherwise.
+ */
+static bool __clk_trigger(struct ccu_data *ccu, struct bcm_clk_trig *trig)
+{
+ /* Trigger the clock and wait for it to finish */
+ __ccu_write(ccu, trig->offset, 1 << trig->bit);
+
+ return __ccu_wait_bit(ccu, trig->offset, trig->bit, false);
+}
+
+/* Divider operations */
+
+/* Read a divider value and return the scaled divisor it represents. */
+static u64 divider_read_scaled(struct ccu_data *ccu, struct bcm_clk_div *div)
+{
+ unsigned long flags;
+ u32 reg_val;
+ u32 reg_div;
+
+ if (divider_is_fixed(div))
+ return (u64)div->fixed;
+
+ flags = ccu_lock(ccu);
+ reg_val = __ccu_read(ccu, div->offset);
+ ccu_unlock(ccu, flags);
+
+ /* Extract the full divider field from the register value */
+ reg_div = bitfield_extract(reg_val, div->shift, div->width);
+
+ /* Return the scaled divisor value it represents */
+ return scaled_div_value(div, reg_div);
+}
+
+/*
+ * Convert a divider's scaled divisor value into its recorded form
+ * and commit it into the hardware divider register.
+ *
+ * Returns 0 on success. Returns -EINVAL for invalid arguments.
+ * Returns -ENXIO if gating failed, and -EIO if a trigger failed.
+ */
+static int __div_commit(struct ccu_data *ccu, struct bcm_clk_gate *gate,
+ struct bcm_clk_div *div, struct bcm_clk_trig *trig)
+{
+ bool enabled;
+ u32 reg_div;
+ u32 reg_val;
+ int ret = 0;
+
+ BUG_ON(divider_is_fixed(div));
+
+ /*
+ * If we're just initializing the divider, and no initial
+ * state was defined in the device tree, we just find out
+ * what its current value is rather than updating it.
+ */
+ if (div->scaled_div == BAD_SCALED_DIV_VALUE) {
+ reg_val = __ccu_read(ccu, div->offset);
+ reg_div = bitfield_extract(reg_val, div->shift, div->width);
+ div->scaled_div = scaled_div_value(div, reg_div);
+
+ return 0;
+ }
+
+ /* Convert the scaled divisor to the value we need to record */
+ reg_div = divider(div, div->scaled_div);
+
+ /* Clock needs to be enabled before changing the rate */
+ enabled = __is_clk_gate_enabled(ccu, gate);
+ if (!enabled && !__clk_gate(ccu, gate, true)) {
+ ret = -ENXIO;
+ goto out;
+ }
+
+ /* Replace the divider value and record the result */
+ reg_val = __ccu_read(ccu, div->offset);
+ reg_val = bitfield_replace(reg_val, div->shift, div->width, reg_div);
+ __ccu_write(ccu, div->offset, reg_val);
+
+ /* If the trigger fails we still want to disable the gate */
+ if (!__clk_trigger(ccu, trig))
+ ret = -EIO;
+
+ /* Disable the clock again if it was disabled to begin with */
+ if (!enabled && !__clk_gate(ccu, gate, false))
+ ret = ret ? ret : -ENXIO; /* return first error */
+out:
+ return ret;
+}
+
+/*
+ * Initialize a divider by committing our desired state to hardware
+ * without the usual checks to see if it's already set up that way.
+ * Returns true if successful, false otherwise.
+ */
+static bool div_init(struct ccu_data *ccu, struct bcm_clk_gate *gate,
+ struct bcm_clk_div *div, struct bcm_clk_trig *trig)
+{
+ if (!divider_exists(div) || divider_is_fixed(div))
+ return true;
+ return !__div_commit(ccu, gate, div, trig);
+}
+
+static int divider_write(struct ccu_data *ccu, struct bcm_clk_gate *gate,
+ struct bcm_clk_div *div, struct bcm_clk_trig *trig,
+ u64 scaled_div)
+{
+ unsigned long flags;
+ u64 previous;
+ int ret;
+
+ BUG_ON(divider_is_fixed(div));
+
+ previous = div->scaled_div;
+ if (previous == scaled_div)
+ return 0; /* No change */
+
+ div->scaled_div = scaled_div;
+
+ flags = ccu_lock(ccu);
+ __ccu_write_enable(ccu);
+
+ ret = __div_commit(ccu, gate, div, trig);
+
+ __ccu_write_disable(ccu);
+ ccu_unlock(ccu, flags);
+
+ if (ret)
+ div->scaled_div = previous; /* Revert the change */
+
+ return ret;
+
+}
+
+/* Common clock rate helpers */
+
+/*
+ * Implement the common clock framework recalc_rate method, taking
+ * into account a divider and an optional pre-divider. The
+ * pre-divider register pointer may be NULL.
+ */
+static unsigned long clk_recalc_rate(struct ccu_data *ccu,
+ struct bcm_clk_div *div, struct bcm_clk_div *pre_div,
+ unsigned long parent_rate)
+{
+ u64 scaled_parent_rate;
+ u64 scaled_div;
+ u64 result;
+
+ if (!divider_exists(div))
+ return parent_rate;
+
+ if (parent_rate > (unsigned long)LONG_MAX)
+ return 0; /* actually this would be a caller bug */
+
+ /*
+ * If there is a pre-divider, divide the scaled parent rate
+ * by the pre-divider value first. In this case--to improve
+ * accuracy--scale the parent rate by *both* the pre-divider
+ * value and the divider before actually computing the
+ * result of the pre-divider.
+ *
+ * If there's only one divider, just scale the parent rate.
+ */
+ if (pre_div && divider_exists(pre_div)) {
+ u64 scaled_rate;
+
+ scaled_rate = scale_rate(pre_div, parent_rate);
+ scaled_rate = scale_rate(div, scaled_rate);
+ scaled_div = divider_read_scaled(ccu, pre_div);
+ scaled_parent_rate = do_div_round_closest(scaled_rate,
+ scaled_div);
+ } else {
+ scaled_parent_rate = scale_rate(div, parent_rate);
+ }
+
+ /*
+ * Get the scaled divisor value, and divide the scaled
+ * parent rate by that to determine this clock's resulting
+ * rate.
+ */
+ scaled_div = divider_read_scaled(ccu, div);
+ result = do_div_round_closest(scaled_parent_rate, scaled_div);
+
+ return (unsigned long)result;
+}
+
+/*
+ * Compute the output rate produced when a given parent rate is fed
+ * into two dividers. The pre-divider can be NULL, and even if it's
+ * non-null it may be nonexistent. It's also OK for the divider to
+ * be nonexistent, and in that case the pre-divider is also ignored.
+ *
+ * If scaled_div is non-null, it is used to return the scaled divisor
+ * value used by the (downstream) divider to produce that rate.
+ */
+static long round_rate(struct ccu_data *ccu, struct bcm_clk_div *div,
+ struct bcm_clk_div *pre_div,
+ unsigned long rate, unsigned long parent_rate,
+ u64 *scaled_div)
+{
+ u64 scaled_parent_rate;
+ u64 min_scaled_div;
+ u64 max_scaled_div;
+ u64 best_scaled_div;
+ u64 result;
+
+ BUG_ON(!divider_exists(div));
+ BUG_ON(!rate);
+ BUG_ON(parent_rate > (u64)LONG_MAX);
+
+ /*
+ * If there is a pre-divider, divide the scaled parent rate
+ * by the pre-divider value first. In this case--to improve
+ * accuracy--scale the parent rate by *both* the pre-divider
+ * value and the divider before actually computing the
+ * result of the pre-divider.
+ *
+ * If there's only one divider, just scale the parent rate.
+ *
+ * For simplicity we treat the pre-divider as fixed (for now).
+ */
+ if (divider_exists(pre_div)) {
+ u64 scaled_rate;
+ u64 scaled_pre_div;
+
+ scaled_rate = scale_rate(pre_div, parent_rate);
+ scaled_rate = scale_rate(div, scaled_rate);
+ scaled_pre_div = divider_read_scaled(ccu, pre_div);
+ scaled_parent_rate = do_div_round_closest(scaled_rate,
+ scaled_pre_div);
+ } else {
+ scaled_parent_rate = scale_rate(div, parent_rate);
+ }
+
+ /*
+ * Compute the best possible divider and ensure it is in
+ * range. A fixed divider can't be changed, so just report
+ * the best we can do.
+ */
+ if (!divider_is_fixed(div)) {
+ best_scaled_div = do_div_round_closest(scaled_parent_rate,
+ rate);
+ min_scaled_div = scaled_div_min(div);
+ max_scaled_div = scaled_div_max(div);
+ if (best_scaled_div > max_scaled_div)
+ best_scaled_div = max_scaled_div;
+ else if (best_scaled_div < min_scaled_div)
+ best_scaled_div = min_scaled_div;
+ } else {
+ best_scaled_div = divider_read_scaled(ccu, div);
+ }
+
+ /* OK, figure out the resulting rate */
+ result = do_div_round_closest(scaled_parent_rate, best_scaled_div);
+
+ if (scaled_div)
+ *scaled_div = best_scaled_div;
+
+ return (long)result;
+}
+
+/* Common clock parent helpers */
+
+/*
+ * For a given parent selector (register field) value, find the
+ * index into a selector's parent_sel array that contains it.
+ * Returns the index, or BAD_CLK_INDEX if it's not found.
+ */
+static u8 parent_index(struct bcm_clk_sel *sel, u8 parent_sel)
+{
+ u8 i;
+
+ BUG_ON(sel->parent_count > (u32)U8_MAX);
+ for (i = 0; i < sel->parent_count; i++)
+ if (sel->parent_sel[i] == parent_sel)
+ return i;
+ return BAD_CLK_INDEX;
+}
+
+/*
+ * Fetch the current value of the selector, and translate that into
+ * its corresponding index in the parent array we registered with
+ * the clock framework.
+ *
+ * Returns parent array index that corresponds with the value found,
+ * or BAD_CLK_INDEX if the found value is out of range.
+ */
+static u8 selector_read_index(struct ccu_data *ccu, struct bcm_clk_sel *sel)
+{
+ unsigned long flags;
+ u32 reg_val;
+ u32 parent_sel;
+ u8 index;
+
+ /* If there's no selector, there's only one parent */
+ if (!selector_exists(sel))
+ return 0;
+
+ /* Get the value in the selector register */
+ flags = ccu_lock(ccu);
+ reg_val = __ccu_read(ccu, sel->offset);
+ ccu_unlock(ccu, flags);
+
+ parent_sel = bitfield_extract(reg_val, sel->shift, sel->width);
+
+ /* Look up that selector's parent array index and return it */
+ index = parent_index(sel, parent_sel);
+ if (index == BAD_CLK_INDEX)
+ pr_err("%s: out-of-range parent selector %u (%s 0x%04x)\n",
+ __func__, parent_sel, ccu->name, sel->offset);
+
+ return index;
+}
+
+/*
+ * Commit our desired selector value to the hardware.
+ *
+ * Returns 0 on success. Returns -EINVAL for invalid arguments.
+ * Returns -ENXIO if gating failed, and -EIO if a trigger failed.
+ */
+static int
+__sel_commit(struct ccu_data *ccu, struct bcm_clk_gate *gate,
+ struct bcm_clk_sel *sel, struct bcm_clk_trig *trig)
+{
+ u32 parent_sel;
+ u32 reg_val;
+ bool enabled;
+ int ret = 0;
+
+ BUG_ON(!selector_exists(sel));
+
+ /*
+ * If we're just initializing the selector, and no initial
+ * state was defined in the device tree, we just find out
+ * what its current value is rather than updating it.
+ */
+ if (sel->clk_index == BAD_CLK_INDEX) {
+ u8 index;
+
+ reg_val = __ccu_read(ccu, sel->offset);
+ parent_sel = bitfield_extract(reg_val, sel->shift, sel->width);
+ index = parent_index(sel, parent_sel);
+ if (index == BAD_CLK_INDEX)
+ return -EINVAL;
+ sel->clk_index = index;
+
+ return 0;
+ }
+
+ BUG_ON((u32)sel->clk_index >= sel->parent_count);
+ parent_sel = sel->parent_sel[sel->clk_index];
+
+ /* Clock needs to be enabled before changing the parent */
+ enabled = __is_clk_gate_enabled(ccu, gate);
+ if (!enabled && !__clk_gate(ccu, gate, true))
+ return -ENXIO;
+
+ /* Replace the selector value and record the result */
+ reg_val = __ccu_read(ccu, sel->offset);
+ reg_val = bitfield_replace(reg_val, sel->shift, sel->width, parent_sel);
+ __ccu_write(ccu, sel->offset, reg_val);
+
+ /* If the trigger fails we still want to disable the gate */
+ if (!__clk_trigger(ccu, trig))
+ ret = -EIO;
+
+ /* Disable the clock again if it was disabled to begin with */
+ if (!enabled && !__clk_gate(ccu, gate, false))
+ ret = ret ? ret : -ENXIO; /* return first error */
+
+ return ret;
+}
+
+/*
+ * Initialize a selector by committing our desired state to hardware
+ * without the usual checks to see if it's already set up that way.
+ * Returns true if successful, false otherwise.
+ */
+static bool sel_init(struct ccu_data *ccu, struct bcm_clk_gate *gate,
+ struct bcm_clk_sel *sel, struct bcm_clk_trig *trig)
+{
+ if (!selector_exists(sel))
+ return true;
+ return !__sel_commit(ccu, gate, sel, trig);
+}
+
+/*
+ * Write a new value into a selector register to switch to a
+ * different parent clock. Returns 0 on success, or an error code
+ * (from __sel_commit()) otherwise.
+ */
+static int selector_write(struct ccu_data *ccu, struct bcm_clk_gate *gate,
+ struct bcm_clk_sel *sel, struct bcm_clk_trig *trig,
+ u8 index)
+{
+ unsigned long flags;
+ u8 previous;
+ int ret;
+
+ previous = sel->clk_index;
+ if (previous == index)
+ return 0; /* No change */
+
+ sel->clk_index = index;
+
+ flags = ccu_lock(ccu);
+ __ccu_write_enable(ccu);
+
+ ret = __sel_commit(ccu, gate, sel, trig);
+
+ __ccu_write_disable(ccu);
+ ccu_unlock(ccu, flags);
+
+ if (ret)
+ sel->clk_index = previous; /* Revert the change */
+
+ return ret;
+}
+
+/* Clock operations */
+
+static int kona_peri_clk_enable(struct clk_hw *hw)
+{
+ struct kona_clk *bcm_clk = to_kona_clk(hw);
+ struct bcm_clk_gate *gate = &bcm_clk->peri->gate;
+
+ return clk_gate(bcm_clk->ccu, bcm_clk->name, gate, true);
+}
+
+static void kona_peri_clk_disable(struct clk_hw *hw)
+{
+ struct kona_clk *bcm_clk = to_kona_clk(hw);
+ struct bcm_clk_gate *gate = &bcm_clk->peri->gate;
+
+ (void)clk_gate(bcm_clk->ccu, bcm_clk->name, gate, false);
+}
+
+static int kona_peri_clk_is_enabled(struct clk_hw *hw)
+{
+ struct kona_clk *bcm_clk = to_kona_clk(hw);
+ struct bcm_clk_gate *gate = &bcm_clk->peri->gate;
+
+ return is_clk_gate_enabled(bcm_clk->ccu, gate) ? 1 : 0;
+}
+
+static unsigned long kona_peri_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct kona_clk *bcm_clk = to_kona_clk(hw);
+ struct peri_clk_data *data = bcm_clk->peri;
+
+ return clk_recalc_rate(bcm_clk->ccu, &data->div, &data->pre_div,
+ parent_rate);
+}
+
+static long kona_peri_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct kona_clk *bcm_clk = to_kona_clk(hw);
+ struct bcm_clk_div *div = &bcm_clk->peri->div;
+
+ if (!divider_exists(div))
+ return __clk_get_rate(hw->clk);
+
+ /* Quietly avoid a zero rate */
+ return round_rate(bcm_clk->ccu, div, &bcm_clk->peri->pre_div,
+ rate ? rate : 1, *parent_rate, NULL);
+}
+
+static int kona_peri_clk_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct kona_clk *bcm_clk = to_kona_clk(hw);
+ struct peri_clk_data *data = bcm_clk->peri;
+ struct bcm_clk_sel *sel = &data->sel;
+ struct bcm_clk_trig *trig;
+ int ret;
+
+ BUG_ON(index >= sel->parent_count);
+
+ /* If there's only one parent we don't require a selector */
+ if (!selector_exists(sel))
+ return 0;
+
+ /*
+ * The regular trigger is used by default, but if there's a
+ * pre-trigger we want to use that instead.
+ */
+ trig = trigger_exists(&data->pre_trig) ? &data->pre_trig
+ : &data->trig;
+
+ ret = selector_write(bcm_clk->ccu, &data->gate, sel, trig, index);
+ if (ret == -ENXIO) {
+ pr_err("%s: gating failure for %s\n", __func__, bcm_clk->name);
+ ret = -EIO; /* Don't proliferate weird errors */
+ } else if (ret == -EIO) {
+ pr_err("%s: %strigger failed for %s\n", __func__,
+ trig == &data->pre_trig ? "pre-" : "",
+ bcm_clk->name);
+ }
+
+ return ret;
+}
+
+static u8 kona_peri_clk_get_parent(struct clk_hw *hw)
+{
+ struct kona_clk *bcm_clk = to_kona_clk(hw);
+ struct peri_clk_data *data = bcm_clk->peri;
+ u8 index;
+
+ index = selector_read_index(bcm_clk->ccu, &data->sel);
+
+ /* Not all callers would handle an out-of-range value gracefully */
+ return index == BAD_CLK_INDEX ? 0 : index;
+}
+
+static int kona_peri_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct kona_clk *bcm_clk = to_kona_clk(hw);
+ struct peri_clk_data *data = bcm_clk->peri;
+ struct bcm_clk_div *div = &data->div;
+ u64 scaled_div = 0;
+ int ret;
+
+ if (parent_rate > (unsigned long)LONG_MAX)
+ return -EINVAL;
+
+ if (rate == __clk_get_rate(hw->clk))
+ return 0;
+
+ if (!divider_exists(div))
+ return rate == parent_rate ? 0 : -EINVAL;
+
+ /*
+ * A fixed divider can't be changed. (Nor can a fixed
+ * pre-divider be, but for now we never actually try to
+ * change that.) Tolerate a request for a no-op change.
+ */
+ if (divider_is_fixed(&data->div))
+ return rate == parent_rate ? 0 : -EINVAL;
+
+ /*
+ * Get the scaled divisor value needed to achieve a clock
+ * rate as close as possible to what was requested, given
+ * the parent clock rate supplied.
+ */
+ (void)round_rate(bcm_clk->ccu, div, &data->pre_div,
+ rate ? rate : 1, parent_rate, &scaled_div);
+
+ /*
+ * We aren't updating any pre-divider at this point, so
+ * we'll use the regular trigger.
+ */
+ ret = divider_write(bcm_clk->ccu, &data->gate, &data->div,
+ &data->trig, scaled_div);
+ if (ret == -ENXIO) {
+ pr_err("%s: gating failure for %s\n", __func__, bcm_clk->name);
+ ret = -EIO; /* Don't proliferate weird errors */
+ } else if (ret == -EIO) {
+ pr_err("%s: trigger failed for %s\n", __func__, bcm_clk->name);
+ }
+
+ return ret;
+}
+
+struct clk_ops kona_peri_clk_ops = {
+ .enable = kona_peri_clk_enable,
+ .disable = kona_peri_clk_disable,
+ .is_enabled = kona_peri_clk_is_enabled,
+ .recalc_rate = kona_peri_clk_recalc_rate,
+ .round_rate = kona_peri_clk_round_rate,
+ .set_parent = kona_peri_clk_set_parent,
+ .get_parent = kona_peri_clk_get_parent,
+ .set_rate = kona_peri_clk_set_rate,
+};
+
+/* Put a peripheral clock into its initial state */
+static bool __peri_clk_init(struct kona_clk *bcm_clk)
+{
+ struct ccu_data *ccu = bcm_clk->ccu;
+ struct peri_clk_data *peri = bcm_clk->peri;
+ const char *name = bcm_clk->name;
+ struct bcm_clk_trig *trig;
+
+ BUG_ON(bcm_clk->type != bcm_clk_peri);
+
+ if (!gate_init(ccu, &peri->gate)) {
+ pr_err("%s: error initializing gate for %s\n", __func__, name);
+ return false;
+ }
+ if (!div_init(ccu, &peri->gate, &peri->div, &peri->trig)) {
+ pr_err("%s: error initializing divider for %s\n", __func__,
+ name);
+ return false;
+ }
+
+ /*
+ * For the pre-divider and selector, the pre-trigger is used
+ * if it's present, otherwise we just use the regular trigger.
+ */
+ trig = trigger_exists(&peri->pre_trig) ? &peri->pre_trig
+ : &peri->trig;
+
+ if (!div_init(ccu, &peri->gate, &peri->pre_div, trig)) {
+ pr_err("%s: error initializing pre-divider for %s\n", __func__,
+ name);
+ return false;
+ }
+
+ if (!sel_init(ccu, &peri->gate, &peri->sel, trig)) {
+ pr_err("%s: error initializing selector for %s\n", __func__,
+ name);
+ return false;
+ }
+
+ return true;
+}
+
+static bool __kona_clk_init(struct kona_clk *bcm_clk)
+{
+ switch (bcm_clk->type) {
+ case bcm_clk_peri:
+ return __peri_clk_init(bcm_clk);
+ default:
+ BUG();
+ }
+ return -EINVAL;
+}
+
+/* Set a CCU and all its clocks into their desired initial state */
+bool __init kona_ccu_init(struct ccu_data *ccu)
+{
+ unsigned long flags;
+ unsigned int which;
+ struct clk **clks = ccu->data.clks;
+ bool success = true;
+
+ flags = ccu_lock(ccu);
+ __ccu_write_enable(ccu);
+
+ for (which = 0; which < ccu->data.clk_num; which++) {
+ struct kona_clk *bcm_clk;
+
+ if (!clks[which])
+ continue;
+ bcm_clk = to_kona_clk(__clk_get_hw(clks[which]));
+ success &= __kona_clk_init(bcm_clk);
+ }
+
+ __ccu_write_disable(ccu);
+ ccu_unlock(ccu, flags);
+ return success;
+}
diff --git a/drivers/clk/bcm/clk-kona.h b/drivers/clk/bcm/clk-kona.h
new file mode 100644
index 000000000000..5e139adc3dc5
--- /dev/null
+++ b/drivers/clk/bcm/clk-kona.h
@@ -0,0 +1,410 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CLK_KONA_H
+#define _CLK_KONA_H
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/clk-provider.h>
+
+#define BILLION 1000000000
+
+/* The common clock framework uses u8 to represent a parent index */
+#define PARENT_COUNT_MAX ((u32)U8_MAX)
+
+#define BAD_CLK_INDEX U8_MAX /* Can't ever be valid */
+#define BAD_CLK_NAME ((const char *)-1)
+
+#define BAD_SCALED_DIV_VALUE U64_MAX
+
+/*
+ * Utility macros for object flag management. If possible, flags
+ * should be defined such that 0 is the desired default value.
+ */
+#define FLAG(type, flag) BCM_CLK_ ## type ## _FLAGS_ ## flag
+#define FLAG_SET(obj, type, flag) ((obj)->flags |= FLAG(type, flag))
+#define FLAG_CLEAR(obj, type, flag) ((obj)->flags &= ~(FLAG(type, flag)))
+#define FLAG_FLIP(obj, type, flag) ((obj)->flags ^= FLAG(type, flag))
+#define FLAG_TEST(obj, type, flag) (!!((obj)->flags & FLAG(type, flag)))
+
+/* Clock field state tests */
+
+#define gate_exists(gate) FLAG_TEST(gate, GATE, EXISTS)
+#define gate_is_enabled(gate) FLAG_TEST(gate, GATE, ENABLED)
+#define gate_is_hw_controllable(gate) FLAG_TEST(gate, GATE, HW)
+#define gate_is_sw_controllable(gate) FLAG_TEST(gate, GATE, SW)
+#define gate_is_sw_managed(gate) FLAG_TEST(gate, GATE, SW_MANAGED)
+#define gate_is_no_disable(gate) FLAG_TEST(gate, GATE, NO_DISABLE)
+
+#define gate_flip_enabled(gate) FLAG_FLIP(gate, GATE, ENABLED)
+
+#define divider_exists(div) FLAG_TEST(div, DIV, EXISTS)
+#define divider_is_fixed(div) FLAG_TEST(div, DIV, FIXED)
+#define divider_has_fraction(div) (!divider_is_fixed(div) && \
+ (div)->frac_width > 0)
+
+#define selector_exists(sel) ((sel)->width != 0)
+#define trigger_exists(trig) FLAG_TEST(trig, TRIG, EXISTS)
+
+/* Clock type, used to tell common block what it's part of */
+enum bcm_clk_type {
+ bcm_clk_none, /* undefined clock type */
+ bcm_clk_bus,
+ bcm_clk_core,
+ bcm_clk_peri
+};
+
+/*
+ * Each CCU defines a mapped area of memory containing registers
+ * used to manage clocks implemented by the CCU. Access to memory
+ * within the CCU's space is serialized by a spinlock. Before any
+ * (other) address can be written, a special access "password" value
+ * must be written to its WR_ACCESS register (located at the base
+ * address of the range). We keep track of the name of each CCU as
+ * it is set up, and maintain them in a list.
+ */
+struct ccu_data {
+ void __iomem *base; /* base of mapped address space */
+ spinlock_t lock; /* serialization lock */
+ bool write_enabled; /* write access is currently enabled */
+ struct list_head links; /* for ccu_list */
+ struct device_node *node;
+ struct clk_onecell_data data;
+ const char *name;
+ u32 range; /* byte range of address space */
+};
+
+/*
+ * Gating control and status is managed by a 32-bit gate register.
+ *
+ * There are several types of gating available:
+ * - (no gate)
+ * A clock with no gate is assumed to be always enabled.
+ * - hardware-only gating (auto-gating)
+ * Enabling or disabling clocks with this type of gate is
+ * managed automatically by the hardware. Such clocks can be
+ * considered by the software to be enabled. The current status
+ * of auto-gated clocks can be read from the gate status bit.
+ * - software-only gating
+ * Auto-gating is not available for this type of clock.
+ * Instead, software manages whether it's enabled by setting or
+ * clearing the enable bit. The current gate status of a gate
+ * under software control can be read from the gate status bit.
+ * To ensure a change to the gating status is complete, the
+ * status bit can be polled to verify that the gate has entered
+ * the desired state.
+ * - selectable hardware or software gating
+ * Gating for this type of clock can be configured to be either
+ * under software or hardware control. Which type is in use is
+ * determined by the hw_sw_sel bit of the gate register.
+ */
+struct bcm_clk_gate {
+ u32 offset; /* gate register offset */
+ u32 status_bit; /* 0: gate is disabled; 0: gatge is enabled */
+ u32 en_bit; /* 0: disable; 1: enable */
+ u32 hw_sw_sel_bit; /* 0: hardware gating; 1: software gating */
+ u32 flags; /* BCM_CLK_GATE_FLAGS_* below */
+};
+
+/*
+ * Gate flags:
+ * HW means this gate can be auto-gated
+ * SW means the state of this gate can be software controlled
+ * NO_DISABLE means this gate is (only) enabled if under software control
+ * SW_MANAGED means the status of this gate is under software control
+ * ENABLED means this software-managed gate is *supposed* to be enabled
+ */
+#define BCM_CLK_GATE_FLAGS_EXISTS ((u32)1 << 0) /* Gate is valid */
+#define BCM_CLK_GATE_FLAGS_HW ((u32)1 << 1) /* Can auto-gate */
+#define BCM_CLK_GATE_FLAGS_SW ((u32)1 << 2) /* Software control */
+#define BCM_CLK_GATE_FLAGS_NO_DISABLE ((u32)1 << 3) /* HW or enabled */
+#define BCM_CLK_GATE_FLAGS_SW_MANAGED ((u32)1 << 4) /* SW now in control */
+#define BCM_CLK_GATE_FLAGS_ENABLED ((u32)1 << 5) /* If SW_MANAGED */
+
+/*
+ * Gate initialization macros.
+ *
+ * Any gate initially under software control will be enabled.
+ */
+
+/* A hardware/software gate initially under software control */
+#define HW_SW_GATE(_offset, _status_bit, _en_bit, _hw_sw_sel_bit) \
+ { \
+ .offset = (_offset), \
+ .status_bit = (_status_bit), \
+ .en_bit = (_en_bit), \
+ .hw_sw_sel_bit = (_hw_sw_sel_bit), \
+ .flags = FLAG(GATE, HW)|FLAG(GATE, SW)| \
+ FLAG(GATE, SW_MANAGED)|FLAG(GATE, ENABLED)| \
+ FLAG(GATE, EXISTS), \
+ }
+
+/* A hardware/software gate initially under hardware control */
+#define HW_SW_GATE_AUTO(_offset, _status_bit, _en_bit, _hw_sw_sel_bit) \
+ { \
+ .offset = (_offset), \
+ .status_bit = (_status_bit), \
+ .en_bit = (_en_bit), \
+ .hw_sw_sel_bit = (_hw_sw_sel_bit), \
+ .flags = FLAG(GATE, HW)|FLAG(GATE, SW)| \
+ FLAG(GATE, EXISTS), \
+ }
+
+/* A hardware-or-enabled gate (enabled if not under hardware control) */
+#define HW_ENABLE_GATE(_offset, _status_bit, _en_bit, _hw_sw_sel_bit) \
+ { \
+ .offset = (_offset), \
+ .status_bit = (_status_bit), \
+ .en_bit = (_en_bit), \
+ .hw_sw_sel_bit = (_hw_sw_sel_bit), \
+ .flags = FLAG(GATE, HW)|FLAG(GATE, SW)| \
+ FLAG(GATE, NO_DISABLE)|FLAG(GATE, EXISTS), \
+ }
+
+/* A software-only gate */
+#define SW_ONLY_GATE(_offset, _status_bit, _en_bit) \
+ { \
+ .offset = (_offset), \
+ .status_bit = (_status_bit), \
+ .en_bit = (_en_bit), \
+ .flags = FLAG(GATE, SW)|FLAG(GATE, SW_MANAGED)| \
+ FLAG(GATE, ENABLED)|FLAG(GATE, EXISTS), \
+ }
+
+/* A hardware-only gate */
+#define HW_ONLY_GATE(_offset, _status_bit) \
+ { \
+ .offset = (_offset), \
+ .status_bit = (_status_bit), \
+ .flags = FLAG(GATE, HW)|FLAG(GATE, EXISTS), \
+ }
+
+/*
+ * Each clock can have zero, one, or two dividers which change the
+ * output rate of the clock. Each divider can be either fixed or
+ * variable. If there are two dividers, they are the "pre-divider"
+ * and the "regular" or "downstream" divider. If there is only one,
+ * there is no pre-divider.
+ *
+ * A fixed divider is any non-zero (positive) value, and it
+ * indicates how the input rate is affected by the divider.
+ *
+ * The value of a variable divider is maintained in a sub-field of a
+ * 32-bit divider register. The position of the field in the
+ * register is defined by its offset and width. The value recorded
+ * in this field is always 1 less than the value it represents.
+ *
+ * In addition, a variable divider can indicate that some subset
+ * of its bits represent a "fractional" part of the divider. Such
+ * bits comprise the low-order portion of the divider field, and can
+ * be viewed as representing the portion of the divider that lies to
+ * the right of the decimal point. Most variable dividers have zero
+ * fractional bits. Variable dividers with non-zero fraction width
+ * still record a value 1 less than the value they represent; the
+ * added 1 does *not* affect the low-order bit in this case, it
+ * affects the bits above the fractional part only. (Often in this
+ * code a divider field value is distinguished from the value it
+ * represents by referring to the latter as a "divisor".)
+ *
+ * In order to avoid dealing with fractions, divider arithmetic is
+ * performed using "scaled" values. A scaled value is one that's
+ * been left-shifted by the fractional width of a divider. Dividing
+ * a scaled value by a scaled divisor produces the desired quotient
+ * without loss of precision and without any other special handling
+ * for fractions.
+ *
+ * The recorded value of a variable divider can be modified. To
+ * modify either divider (or both), a clock must be enabled (i.e.,
+ * using its gate). In addition, a trigger register (described
+ * below) must be used to commit the change, and polled to verify
+ * the change is complete.
+ */
+struct bcm_clk_div {
+ union {
+ struct { /* variable divider */
+ u32 offset; /* divider register offset */
+ u32 shift; /* field shift */
+ u32 width; /* field width */
+ u32 frac_width; /* field fraction width */
+
+ u64 scaled_div; /* scaled divider value */
+ };
+ u32 fixed; /* non-zero fixed divider value */
+ };
+ u32 flags; /* BCM_CLK_DIV_FLAGS_* below */
+};
+
+/*
+ * Divider flags:
+ * EXISTS means this divider exists
+ * FIXED means it is a fixed-rate divider
+ */
+#define BCM_CLK_DIV_FLAGS_EXISTS ((u32)1 << 0) /* Divider is valid */
+#define BCM_CLK_DIV_FLAGS_FIXED ((u32)1 << 1) /* Fixed-value */
+
+/* Divider initialization macros */
+
+/* A fixed (non-zero) divider */
+#define FIXED_DIVIDER(_value) \
+ { \
+ .fixed = (_value), \
+ .flags = FLAG(DIV, EXISTS)|FLAG(DIV, FIXED), \
+ }
+
+/* A divider with an integral divisor */
+#define DIVIDER(_offset, _shift, _width) \
+ { \
+ .offset = (_offset), \
+ .shift = (_shift), \
+ .width = (_width), \
+ .scaled_div = BAD_SCALED_DIV_VALUE, \
+ .flags = FLAG(DIV, EXISTS), \
+ }
+
+/* A divider whose divisor has an integer and fractional part */
+#define FRAC_DIVIDER(_offset, _shift, _width, _frac_width) \
+ { \
+ .offset = (_offset), \
+ .shift = (_shift), \
+ .width = (_width), \
+ .frac_width = (_frac_width), \
+ .scaled_div = BAD_SCALED_DIV_VALUE, \
+ .flags = FLAG(DIV, EXISTS), \
+ }
+
+/*
+ * Clocks may have multiple "parent" clocks. If there is more than
+ * one, a selector must be specified to define which of the parent
+ * clocks is currently in use. The selected clock is indicated in a
+ * sub-field of a 32-bit selector register. The range of
+ * representable selector values typically exceeds the number of
+ * available parent clocks. Occasionally the reset value of a
+ * selector field is explicitly set to a (specific) value that does
+ * not correspond to a defined input clock.
+ *
+ * We register all known parent clocks with the common clock code
+ * using a packed array (i.e., no empty slots) of (parent) clock
+ * names, and refer to them later using indexes into that array.
+ * We maintain an array of selector values indexed by common clock
+ * index values in order to map between these common clock indexes
+ * and the selector values used by the hardware.
+ *
+ * Like dividers, a selector can be modified, but to do so a clock
+ * must be enabled, and a trigger must be used to commit the change.
+ */
+struct bcm_clk_sel {
+ u32 offset; /* selector register offset */
+ u32 shift; /* field shift */
+ u32 width; /* field width */
+
+ u32 parent_count; /* number of entries in parent_sel[] */
+ u32 *parent_sel; /* array of parent selector values */
+ u8 clk_index; /* current selected index in parent_sel[] */
+};
+
+/* Selector initialization macro */
+#define SELECTOR(_offset, _shift, _width) \
+ { \
+ .offset = (_offset), \
+ .shift = (_shift), \
+ .width = (_width), \
+ .clk_index = BAD_CLK_INDEX, \
+ }
+
+/*
+ * Making changes to a variable divider or a selector for a clock
+ * requires the use of a trigger. A trigger is defined by a single
+ * bit within a register. To signal a change, a 1 is written into
+ * that bit. To determine when the change has been completed, that
+ * trigger bit is polled; the read value will be 1 while the change
+ * is in progress, and 0 when it is complete.
+ *
+ * Occasionally a clock will have more than one trigger. In this
+ * case, the "pre-trigger" will be used when changing a clock's
+ * selector and/or its pre-divider.
+ */
+struct bcm_clk_trig {
+ u32 offset; /* trigger register offset */
+ u32 bit; /* trigger bit */
+ u32 flags; /* BCM_CLK_TRIG_FLAGS_* below */
+};
+
+/*
+ * Trigger flags:
+ * EXISTS means this trigger exists
+ */
+#define BCM_CLK_TRIG_FLAGS_EXISTS ((u32)1 << 0) /* Trigger is valid */
+
+/* Trigger initialization macro */
+#define TRIGGER(_offset, _bit) \
+ { \
+ .offset = (_offset), \
+ .bit = (_bit), \
+ .flags = FLAG(TRIG, EXISTS), \
+ }
+
+struct peri_clk_data {
+ struct bcm_clk_gate gate;
+ struct bcm_clk_trig pre_trig;
+ struct bcm_clk_div pre_div;
+ struct bcm_clk_trig trig;
+ struct bcm_clk_div div;
+ struct bcm_clk_sel sel;
+ const char *clocks[]; /* must be last; use CLOCKS() to declare */
+};
+#define CLOCKS(...) { __VA_ARGS__, NULL, }
+#define NO_CLOCKS { NULL, } /* Must use of no parent clocks */
+
+struct kona_clk {
+ struct clk_hw hw;
+ struct clk_init_data init_data;
+ const char *name; /* name of this clock */
+ struct ccu_data *ccu; /* ccu this clock is associated with */
+ enum bcm_clk_type type;
+ union {
+ void *data;
+ struct peri_clk_data *peri;
+ };
+};
+#define to_kona_clk(_hw) \
+ container_of(_hw, struct kona_clk, hw)
+
+/* Exported globals */
+
+extern struct clk_ops kona_peri_clk_ops;
+
+/* Help functions */
+
+#define PERI_CLK_SETUP(clks, ccu, id, name) \
+ clks[id] = kona_clk_setup(ccu, #name, bcm_clk_peri, &name ## _data)
+
+/* Externally visible functions */
+
+extern u64 do_div_round_closest(u64 dividend, unsigned long divisor);
+extern u64 scaled_div_max(struct bcm_clk_div *div);
+extern u64 scaled_div_build(struct bcm_clk_div *div, u32 div_value,
+ u32 billionths);
+
+extern struct clk *kona_clk_setup(struct ccu_data *ccu, const char *name,
+ enum bcm_clk_type type, void *data);
+extern void __init kona_dt_ccu_setup(struct device_node *node,
+ int (*ccu_clks_setup)(struct ccu_data *));
+extern bool __init kona_ccu_init(struct ccu_data *ccu);
+
+#endif /* _CLK_KONA_H */
diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
index 010f071af883..b4f967210175 100644
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -16,6 +16,7 @@
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
#include "clk.h"
@@ -130,6 +131,17 @@ enum exynos4_plls {
nr_plls /* number of PLLs */
};
+static void __iomem *reg_base;
+static enum exynos4_soc exynos4_soc;
+
+/*
+ * Support for CMU save/restore across system suspends
+ */
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *exynos4_save_common;
+static struct samsung_clk_reg_dump *exynos4_save_soc;
+static struct samsung_clk_reg_dump *exynos4_save_pll;
+
/*
* list of controller registers to be saved and restored during a
* suspend/resume cycle.
@@ -154,6 +166,17 @@ static unsigned long exynos4x12_clk_save[] __initdata = {
E4X12_MPLL_CON0,
};
+static unsigned long exynos4_clk_pll_regs[] __initdata = {
+ EPLL_LOCK,
+ VPLL_LOCK,
+ EPLL_CON0,
+ EPLL_CON1,
+ EPLL_CON2,
+ VPLL_CON0,
+ VPLL_CON1,
+ VPLL_CON2,
+};
+
static unsigned long exynos4_clk_regs[] __initdata = {
SRC_LEFTBUS,
DIV_LEFTBUS,
@@ -161,12 +184,6 @@ static unsigned long exynos4_clk_regs[] __initdata = {
SRC_RIGHTBUS,
DIV_RIGHTBUS,
GATE_IP_RIGHTBUS,
- EPLL_CON0,
- EPLL_CON1,
- EPLL_CON2,
- VPLL_CON0,
- VPLL_CON1,
- VPLL_CON2,
SRC_TOP0,
SRC_TOP1,
SRC_CAM,
@@ -227,6 +244,124 @@ static unsigned long exynos4_clk_regs[] __initdata = {
GATE_IP_CPU,
};
+static const struct samsung_clk_reg_dump src_mask_suspend[] = {
+ { .offset = SRC_MASK_TOP, .value = 0x00000001, },
+ { .offset = SRC_MASK_CAM, .value = 0x11111111, },
+ { .offset = SRC_MASK_TV, .value = 0x00000111, },
+ { .offset = SRC_MASK_LCD0, .value = 0x00001111, },
+ { .offset = SRC_MASK_MAUDIO, .value = 0x00000001, },
+ { .offset = SRC_MASK_FSYS, .value = 0x01011111, },
+ { .offset = SRC_MASK_PERIL0, .value = 0x01111111, },
+ { .offset = SRC_MASK_PERIL1, .value = 0x01110111, },
+ { .offset = SRC_MASK_DMC, .value = 0x00010000, },
+};
+
+static const struct samsung_clk_reg_dump src_mask_suspend_e4210[] = {
+ { .offset = E4210_SRC_MASK_LCD1, .value = 0x00001111, },
+};
+
+#define PLL_ENABLED (1 << 31)
+#define PLL_LOCKED (1 << 29)
+
+static void exynos4_clk_wait_for_pll(u32 reg)
+{
+ u32 pll_con;
+
+ pll_con = readl(reg_base + reg);
+ if (!(pll_con & PLL_ENABLED))
+ return;
+
+ while (!(pll_con & PLL_LOCKED)) {
+ cpu_relax();
+ pll_con = readl(reg_base + reg);
+ }
+}
+
+static int exynos4_clk_suspend(void)
+{
+ samsung_clk_save(reg_base, exynos4_save_common,
+ ARRAY_SIZE(exynos4_clk_regs));
+ samsung_clk_save(reg_base, exynos4_save_pll,
+ ARRAY_SIZE(exynos4_clk_pll_regs));
+
+ if (exynos4_soc == EXYNOS4210) {
+ samsung_clk_save(reg_base, exynos4_save_soc,
+ ARRAY_SIZE(exynos4210_clk_save));
+ samsung_clk_restore(reg_base, src_mask_suspend_e4210,
+ ARRAY_SIZE(src_mask_suspend_e4210));
+ } else {
+ samsung_clk_save(reg_base, exynos4_save_soc,
+ ARRAY_SIZE(exynos4x12_clk_save));
+ }
+
+ samsung_clk_restore(reg_base, src_mask_suspend,
+ ARRAY_SIZE(src_mask_suspend));
+
+ return 0;
+}
+
+static void exynos4_clk_resume(void)
+{
+ samsung_clk_restore(reg_base, exynos4_save_pll,
+ ARRAY_SIZE(exynos4_clk_pll_regs));
+
+ exynos4_clk_wait_for_pll(EPLL_CON0);
+ exynos4_clk_wait_for_pll(VPLL_CON0);
+
+ samsung_clk_restore(reg_base, exynos4_save_common,
+ ARRAY_SIZE(exynos4_clk_regs));
+
+ if (exynos4_soc == EXYNOS4210)
+ samsung_clk_restore(reg_base, exynos4_save_soc,
+ ARRAY_SIZE(exynos4210_clk_save));
+ else
+ samsung_clk_restore(reg_base, exynos4_save_soc,
+ ARRAY_SIZE(exynos4x12_clk_save));
+}
+
+static struct syscore_ops exynos4_clk_syscore_ops = {
+ .suspend = exynos4_clk_suspend,
+ .resume = exynos4_clk_resume,
+};
+
+static void exynos4_clk_sleep_init(void)
+{
+ exynos4_save_common = samsung_clk_alloc_reg_dump(exynos4_clk_regs,
+ ARRAY_SIZE(exynos4_clk_regs));
+ if (!exynos4_save_common)
+ goto err_warn;
+
+ if (exynos4_soc == EXYNOS4210)
+ exynos4_save_soc = samsung_clk_alloc_reg_dump(
+ exynos4210_clk_save,
+ ARRAY_SIZE(exynos4210_clk_save));
+ else
+ exynos4_save_soc = samsung_clk_alloc_reg_dump(
+ exynos4x12_clk_save,
+ ARRAY_SIZE(exynos4x12_clk_save));
+ if (!exynos4_save_soc)
+ goto err_common;
+
+ exynos4_save_pll = samsung_clk_alloc_reg_dump(exynos4_clk_pll_regs,
+ ARRAY_SIZE(exynos4_clk_pll_regs));
+ if (!exynos4_save_pll)
+ goto err_soc;
+
+ register_syscore_ops(&exynos4_clk_syscore_ops);
+ return;
+
+err_soc:
+ kfree(exynos4_save_soc);
+err_common:
+ kfree(exynos4_save_common);
+err_warn:
+ pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+ __func__);
+}
+#else
+static void exynos4_clk_sleep_init(void) {}
+#endif
+
/* list of all parent clock list */
PNAME(mout_apll_p) = { "fin_pll", "fout_apll", };
PNAME(mout_mpll_p) = { "fin_pll", "fout_mpll", };
@@ -908,12 +1043,13 @@ static unsigned long exynos4_get_xom(void)
return xom;
}
-static void __init exynos4_clk_register_finpll(unsigned long xom)
+static void __init exynos4_clk_register_finpll(void)
{
struct samsung_fixed_rate_clock fclk;
struct clk *clk;
unsigned long finpll_f = 24000000;
char *parent_name;
+ unsigned int xom = exynos4_get_xom();
parent_name = xom & 1 ? "xusbxti" : "xxti";
clk = clk_get(NULL, parent_name);
@@ -1038,27 +1174,21 @@ static struct samsung_pll_clock exynos4x12_plls[nr_plls] __initdata = {
/* register exynos4 clocks */
static void __init exynos4_clk_init(struct device_node *np,
- enum exynos4_soc exynos4_soc,
- void __iomem *reg_base, unsigned long xom)
+ enum exynos4_soc soc)
{
+ exynos4_soc = soc;
+
reg_base = of_iomap(np, 0);
if (!reg_base)
panic("%s: failed to map registers\n", __func__);
- if (exynos4_soc == EXYNOS4210)
- samsung_clk_init(np, reg_base, CLK_NR_CLKS,
- exynos4_clk_regs, ARRAY_SIZE(exynos4_clk_regs),
- exynos4210_clk_save, ARRAY_SIZE(exynos4210_clk_save));
- else
- samsung_clk_init(np, reg_base, CLK_NR_CLKS,
- exynos4_clk_regs, ARRAY_SIZE(exynos4_clk_regs),
- exynos4x12_clk_save, ARRAY_SIZE(exynos4x12_clk_save));
+ samsung_clk_init(np, reg_base, CLK_NR_CLKS);
samsung_clk_of_register_fixed_ext(exynos4_fixed_rate_ext_clks,
ARRAY_SIZE(exynos4_fixed_rate_ext_clks),
ext_clk_match);
- exynos4_clk_register_finpll(xom);
+ exynos4_clk_register_finpll();
if (exynos4_soc == EXYNOS4210) {
samsung_clk_register_mux(exynos4210_mux_early,
@@ -1125,6 +1255,8 @@ static void __init exynos4_clk_init(struct device_node *np,
samsung_clk_register_alias(exynos4_aliases,
ARRAY_SIZE(exynos4_aliases));
+ exynos4_clk_sleep_init();
+
pr_info("%s clocks: sclk_apll = %ld, sclk_mpll = %ld\n"
"\tsclk_epll = %ld, sclk_vpll = %ld, arm_clk = %ld\n",
exynos4_soc == EXYNOS4210 ? "Exynos4210" : "Exynos4x12",
@@ -1136,12 +1268,12 @@ static void __init exynos4_clk_init(struct device_node *np,
static void __init exynos4210_clk_init(struct device_node *np)
{
- exynos4_clk_init(np, EXYNOS4210, NULL, exynos4_get_xom());
+ exynos4_clk_init(np, EXYNOS4210);
}
CLK_OF_DECLARE(exynos4210_clk, "samsung,exynos4210-clock", exynos4210_clk_init);
static void __init exynos4412_clk_init(struct device_node *np)
{
- exynos4_clk_init(np, EXYNOS4X12, NULL, exynos4_get_xom());
+ exynos4_clk_init(np, EXYNOS4X12);
}
CLK_OF_DECLARE(exynos4412_clk, "samsung,exynos4412-clock", exynos4412_clk_init);
diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
index ff4beebe1f0b..e7ee4420da81 100644
--- a/drivers/clk/samsung/clk-exynos5250.c
+++ b/drivers/clk/samsung/clk-exynos5250.c
@@ -16,6 +16,7 @@
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
#include "clk.h"
@@ -85,6 +86,11 @@ enum exynos5250_plls {
nr_plls /* number of PLLs */
};
+static void __iomem *reg_base;
+
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *exynos5250_save;
+
/*
* list of controller registers to be saved and restored during a
* suspend/resume cycle.
@@ -137,6 +143,41 @@ static unsigned long exynos5250_clk_regs[] __initdata = {
GATE_IP_ACP,
};
+static int exynos5250_clk_suspend(void)
+{
+ samsung_clk_save(reg_base, exynos5250_save,
+ ARRAY_SIZE(exynos5250_clk_regs));
+
+ return 0;
+}
+
+static void exynos5250_clk_resume(void)
+{
+ samsung_clk_restore(reg_base, exynos5250_save,
+ ARRAY_SIZE(exynos5250_clk_regs));
+}
+
+static struct syscore_ops exynos5250_clk_syscore_ops = {
+ .suspend = exynos5250_clk_suspend,
+ .resume = exynos5250_clk_resume,
+};
+
+static void exynos5250_clk_sleep_init(void)
+{
+ exynos5250_save = samsung_clk_alloc_reg_dump(exynos5250_clk_regs,
+ ARRAY_SIZE(exynos5250_clk_regs));
+ if (!exynos5250_save) {
+ pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+ __func__);
+ return;
+ }
+
+ register_syscore_ops(&exynos5250_clk_syscore_ops);
+}
+#else
+static void exynos5250_clk_sleep_init(void) {}
+#endif
+
/* list of all parent clock list */
PNAME(mout_apll_p) = { "fin_pll", "fout_apll", };
PNAME(mout_cpu_p) = { "mout_apll", "mout_mpll", };
@@ -645,8 +686,6 @@ static struct of_device_id ext_clk_match[] __initdata = {
/* register exynox5250 clocks */
static void __init exynos5250_clk_init(struct device_node *np)
{
- void __iomem *reg_base;
-
if (np) {
reg_base = of_iomap(np, 0);
if (!reg_base)
@@ -655,9 +694,7 @@ static void __init exynos5250_clk_init(struct device_node *np)
panic("%s: unable to determine soc\n", __func__);
}
- samsung_clk_init(np, reg_base, CLK_NR_CLKS,
- exynos5250_clk_regs, ARRAY_SIZE(exynos5250_clk_regs),
- NULL, 0);
+ samsung_clk_init(np, reg_base, CLK_NR_CLKS);
samsung_clk_of_register_fixed_ext(exynos5250_fixed_rate_ext_clks,
ARRAY_SIZE(exynos5250_fixed_rate_ext_clks),
ext_clk_match);
@@ -685,6 +722,8 @@ static void __init exynos5250_clk_init(struct device_node *np)
samsung_clk_register_gate(exynos5250_gate_clks,
ARRAY_SIZE(exynos5250_gate_clks));
+ exynos5250_clk_sleep_init();
+
pr_info("Exynos5250: clock setup completed, armclk=%ld\n",
_get_rate("div_arm2"));
}
diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index ab4f2f7d88ef..60b26819bed5 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -16,6 +16,7 @@
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
#include "clk.h"
@@ -108,6 +109,11 @@ enum exynos5420_plls {
nr_plls /* number of PLLs */
};
+static void __iomem *reg_base;
+
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *exynos5420_save;
+
/*
* list of controller registers to be saved and restored during a
* suspend/resume cycle.
@@ -174,6 +180,41 @@ static unsigned long exynos5420_clk_regs[] __initdata = {
DIV_KFC0,
};
+static int exynos5420_clk_suspend(void)
+{
+ samsung_clk_save(reg_base, exynos5420_save,
+ ARRAY_SIZE(exynos5420_clk_regs));
+
+ return 0;
+}
+
+static void exynos5420_clk_resume(void)
+{
+ samsung_clk_restore(reg_base, exynos5420_save,
+ ARRAY_SIZE(exynos5420_clk_regs));
+}
+
+static struct syscore_ops exynos5420_clk_syscore_ops = {
+ .suspend = exynos5420_clk_suspend,
+ .resume = exynos5420_clk_resume,
+};
+
+static void exynos5420_clk_sleep_init(void)
+{
+ exynos5420_save = samsung_clk_alloc_reg_dump(exynos5420_clk_regs,
+ ARRAY_SIZE(exynos5420_clk_regs));
+ if (!exynos5420_save) {
+ pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+ __func__);
+ return;
+ }
+
+ register_syscore_ops(&exynos5420_clk_syscore_ops);
+}
+#else
+static void exynos5420_clk_sleep_init(void) {}
+#endif
+
/* list of all parent clocks */
PNAME(mspll_cpu_p) = { "sclk_cpll", "sclk_dpll",
"sclk_mpll", "sclk_spll" };
@@ -737,8 +778,6 @@ static struct of_device_id ext_clk_match[] __initdata = {
/* register exynos5420 clocks */
static void __init exynos5420_clk_init(struct device_node *np)
{
- void __iomem *reg_base;
-
if (np) {
reg_base = of_iomap(np, 0);
if (!reg_base)
@@ -747,9 +786,7 @@ static void __init exynos5420_clk_init(struct device_node *np)
panic("%s: unable to determine soc\n", __func__);
}
- samsung_clk_init(np, reg_base, CLK_NR_CLKS,
- exynos5420_clk_regs, ARRAY_SIZE(exynos5420_clk_regs),
- NULL, 0);
+ samsung_clk_init(np, reg_base, CLK_NR_CLKS);
samsung_clk_of_register_fixed_ext(exynos5420_fixed_rate_ext_clks,
ARRAY_SIZE(exynos5420_fixed_rate_ext_clks),
ext_clk_match);
@@ -765,5 +802,7 @@ static void __init exynos5420_clk_init(struct device_node *np)
ARRAY_SIZE(exynos5420_div_clks));
samsung_clk_register_gate(exynos5420_gate_clks,
ARRAY_SIZE(exynos5420_gate_clks));
+
+ exynos5420_clk_sleep_init();
}
CLK_OF_DECLARE(exynos5420_clk, "samsung,exynos5420-clock", exynos5420_clk_init);
diff --git a/drivers/clk/samsung/clk-exynos5440.c b/drivers/clk/samsung/clk-exynos5440.c
index cbc15b56891d..2bfad5a993d0 100644
--- a/drivers/clk/samsung/clk-exynos5440.c
+++ b/drivers/clk/samsung/clk-exynos5440.c
@@ -101,7 +101,7 @@ static void __init exynos5440_clk_init(struct device_node *np)
return;
}
- samsung_clk_init(np, reg_base, CLK_NR_CLKS, NULL, 0, NULL, 0);
+ samsung_clk_init(np, reg_base, CLK_NR_CLKS);
samsung_clk_of_register_fixed_ext(exynos5440_fixed_rate_ext_clks,
ARRAY_SIZE(exynos5440_fixed_rate_ext_clks), ext_clk_match);
diff --git a/drivers/clk/samsung/clk-s3c64xx.c b/drivers/clk/samsung/clk-s3c64xx.c
index 8e27aee6887e..8bda658137a8 100644
--- a/drivers/clk/samsung/clk-s3c64xx.c
+++ b/drivers/clk/samsung/clk-s3c64xx.c
@@ -13,6 +13,7 @@
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
#include <dt-bindings/clock/samsung,s3c64xx-clock.h>
@@ -61,6 +62,13 @@ enum s3c64xx_plls {
apll, mpll, epll,
};
+static void __iomem *reg_base;
+static bool is_s3c6400;
+
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *s3c64xx_save_common;
+static struct samsung_clk_reg_dump *s3c64xx_save_soc;
+
/*
* List of controller registers to be saved and restored during
* a suspend/resume cycle.
@@ -87,6 +95,60 @@ static unsigned long s3c6410_clk_regs[] __initdata = {
MEM0_GATE,
};
+static int s3c64xx_clk_suspend(void)
+{
+ samsung_clk_save(reg_base, s3c64xx_save_common,
+ ARRAY_SIZE(s3c64xx_clk_regs));
+
+ if (!is_s3c6400)
+ samsung_clk_save(reg_base, s3c64xx_save_soc,
+ ARRAY_SIZE(s3c6410_clk_regs));
+
+ return 0;
+}
+
+static void s3c64xx_clk_resume(void)
+{
+ samsung_clk_restore(reg_base, s3c64xx_save_common,
+ ARRAY_SIZE(s3c64xx_clk_regs));
+
+ if (!is_s3c6400)
+ samsung_clk_restore(reg_base, s3c64xx_save_soc,
+ ARRAY_SIZE(s3c6410_clk_regs));
+}
+
+static struct syscore_ops s3c64xx_clk_syscore_ops = {
+ .suspend = s3c64xx_clk_suspend,
+ .resume = s3c64xx_clk_resume,
+};
+
+static void s3c64xx_clk_sleep_init(void)
+{
+ s3c64xx_save_common = samsung_clk_alloc_reg_dump(s3c64xx_clk_regs,
+ ARRAY_SIZE(s3c64xx_clk_regs));
+ if (!s3c64xx_save_common)
+ goto err_warn;
+
+ if (!is_s3c6400) {
+ s3c64xx_save_soc = samsung_clk_alloc_reg_dump(s3c6410_clk_regs,
+ ARRAY_SIZE(s3c6410_clk_regs));
+ if (!s3c64xx_save_soc)
+ goto err_soc;
+ }
+
+ register_syscore_ops(&s3c64xx_clk_syscore_ops);
+ return;
+
+err_soc:
+ kfree(s3c64xx_save_common);
+err_warn:
+ pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+ __func__);
+}
+#else
+static void s3c64xx_clk_sleep_init(void) {}
+#endif
+
/* List of parent clocks common for all S3C64xx SoCs. */
PNAME(spi_mmc_p) = { "mout_epll", "dout_mpll", "fin_pll", "clk27m" };
PNAME(uart_p) = { "mout_epll", "dout_mpll" };
@@ -391,11 +453,11 @@ static void __init s3c64xx_clk_register_fixed_ext(unsigned long fin_pll_f,
/* Register s3c64xx clocks. */
void __init s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
- unsigned long xusbxti_f, bool is_s3c6400,
- void __iomem *reg_base)
+ unsigned long xusbxti_f, bool s3c6400,
+ void __iomem *base)
{
- unsigned long *soc_regs = NULL;
- unsigned long nr_soc_regs = 0;
+ reg_base = base;
+ is_s3c6400 = s3c6400;
if (np) {
reg_base = of_iomap(np, 0);
@@ -403,13 +465,7 @@ void __init s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
panic("%s: failed to map registers\n", __func__);
}
- if (!is_s3c6400) {
- soc_regs = s3c6410_clk_regs;
- nr_soc_regs = ARRAY_SIZE(s3c6410_clk_regs);
- }
-
- samsung_clk_init(np, reg_base, NR_CLKS, s3c64xx_clk_regs,
- ARRAY_SIZE(s3c64xx_clk_regs), soc_regs, nr_soc_regs);
+ samsung_clk_init(np, reg_base, NR_CLKS);
/* Register external clocks. */
if (!np)
@@ -452,6 +508,7 @@ void __init s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
samsung_clk_register_alias(s3c64xx_clock_aliases,
ARRAY_SIZE(s3c64xx_clock_aliases));
+ s3c64xx_clk_sleep_init();
pr_info("%s clocks: apll = %lu, mpll = %lu\n"
"\tepll = %lu, arm_clk = %lu\n",
diff --git a/drivers/clk/samsung/clk.c b/drivers/clk/samsung/clk.c
index f503f32e2f80..91bec3ebdc8f 100644
--- a/drivers/clk/samsung/clk.c
+++ b/drivers/clk/samsung/clk.c
@@ -21,64 +21,45 @@ static void __iomem *reg_base;
static struct clk_onecell_data clk_data;
#endif
-#ifdef CONFIG_PM_SLEEP
-static struct samsung_clk_reg_dump *reg_dump;
-static unsigned long nr_reg_dump;
-
-static int samsung_clk_suspend(void)
+void samsung_clk_save(void __iomem *base,
+ struct samsung_clk_reg_dump *rd,
+ unsigned int num_regs)
{
- struct samsung_clk_reg_dump *rd = reg_dump;
- unsigned long i;
-
- for (i = 0; i < nr_reg_dump; i++, rd++)
- rd->value = __raw_readl(reg_base + rd->offset);
+ for (; num_regs > 0; --num_regs, ++rd)
+ rd->value = readl(base + rd->offset);
+}
- return 0;
+void samsung_clk_restore(void __iomem *base,
+ const struct samsung_clk_reg_dump *rd,
+ unsigned int num_regs)
+{
+ for (; num_regs > 0; --num_regs, ++rd)
+ writel(rd->value, base + rd->offset);
}
-static void samsung_clk_resume(void)
+struct samsung_clk_reg_dump *samsung_clk_alloc_reg_dump(
+ const unsigned long *rdump,
+ unsigned long nr_rdump)
{
- struct samsung_clk_reg_dump *rd = reg_dump;
- unsigned long i;
+ struct samsung_clk_reg_dump *rd;
+ unsigned int i;
- for (i = 0; i < nr_reg_dump; i++, rd++)
- __raw_writel(rd->value, reg_base + rd->offset);
-}
+ rd = kcalloc(nr_rdump, sizeof(*rd), GFP_KERNEL);
+ if (!rd)
+ return NULL;
+
+ for (i = 0; i < nr_rdump; ++i)
+ rd[i].offset = rdump[i];
-static struct syscore_ops samsung_clk_syscore_ops = {
- .suspend = samsung_clk_suspend,
- .resume = samsung_clk_resume,
-};
-#endif /* CONFIG_PM_SLEEP */
+ return rd;
+}
/* setup the essentials required to support clock lookup using ccf */
void __init samsung_clk_init(struct device_node *np, void __iomem *base,
- unsigned long nr_clks, unsigned long *rdump,
- unsigned long nr_rdump, unsigned long *soc_rdump,
- unsigned long nr_soc_rdump)
+ unsigned long nr_clks)
{
reg_base = base;
-#ifdef CONFIG_PM_SLEEP
- if (rdump && nr_rdump) {
- unsigned int idx;
- reg_dump = kzalloc(sizeof(struct samsung_clk_reg_dump)
- * (nr_rdump + nr_soc_rdump), GFP_KERNEL);
- if (!reg_dump) {
- pr_err("%s: memory alloc for register dump failed\n",
- __func__);
- return;
- }
-
- for (idx = 0; idx < nr_rdump; idx++)
- reg_dump[idx].offset = rdump[idx];
- for (idx = 0; idx < nr_soc_rdump; idx++)
- reg_dump[nr_rdump + idx].offset = soc_rdump[idx];
- nr_reg_dump = nr_rdump + nr_soc_rdump;
- register_syscore_ops(&samsung_clk_syscore_ops);
- }
-#endif
-
clk_table = kzalloc(sizeof(struct clk *) * nr_clks, GFP_KERNEL);
if (!clk_table)
panic("could not allocate clock lookup table\n");
diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h
index 31b4174e7a5b..c7141ba826e0 100644
--- a/drivers/clk/samsung/clk.h
+++ b/drivers/clk/samsung/clk.h
@@ -313,9 +313,7 @@ struct samsung_pll_clock {
_lock, _con, _rtable, _alias)
extern void __init samsung_clk_init(struct device_node *np, void __iomem *base,
- unsigned long nr_clks, unsigned long *rdump,
- unsigned long nr_rdump, unsigned long *soc_rdump,
- unsigned long nr_soc_rdump);
+ unsigned long nr_clks);
extern void __init samsung_clk_of_register_fixed_ext(
struct samsung_fixed_rate_clock *fixed_rate_clk,
unsigned int nr_fixed_rate_clk,
@@ -340,4 +338,14 @@ extern void __init samsung_clk_register_pll(struct samsung_pll_clock *pll_list,
extern unsigned long _get_rate(const char *clk_name);
+extern void samsung_clk_save(void __iomem *base,
+ struct samsung_clk_reg_dump *rd,
+ unsigned int num_regs);
+extern void samsung_clk_restore(void __iomem *base,
+ const struct samsung_clk_reg_dump *rd,
+ unsigned int num_regs);
+extern struct samsung_clk_reg_dump *samsung_clk_alloc_reg_dump(
+ const unsigned long *rdump,
+ unsigned long nr_rdump);
+
#endif /* __SAMSUNG_CLK_H */
diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c
index 8cbfcf88fae3..a820b0cfcf57 100644
--- a/drivers/clk/versatile/clk-icst.c
+++ b/drivers/clk/versatile/clk-icst.c
@@ -33,7 +33,7 @@ struct clk_icst {
struct clk_hw hw;
void __iomem *vcoreg;
void __iomem *lockreg;
- const struct icst_params *params;
+ struct icst_params *params;
unsigned long rate;
};
@@ -84,6 +84,8 @@ static unsigned long icst_recalc_rate(struct clk_hw *hw,
struct clk_icst *icst = to_icst(hw);
struct icst_vco vco;
+ if (parent_rate)
+ icst->params->ref = parent_rate;
vco = vco_get(icst->vcoreg);
icst->rate = icst_hz(icst->params, vco);
return icst->rate;
@@ -105,6 +107,8 @@ static int icst_set_rate(struct clk_hw *hw, unsigned long rate,
struct clk_icst *icst = to_icst(hw);
struct icst_vco vco;
+ if (parent_rate)
+ icst->params->ref = parent_rate;
vco = icst_hz_to_vco(icst->params, rate);
icst->rate = icst_hz(icst->params, vco);
vco_set(icst->lockreg, icst->vcoreg, vco);
@@ -120,24 +124,33 @@ static const struct clk_ops icst_ops = {
struct clk *icst_clk_register(struct device *dev,
const struct clk_icst_desc *desc,
const char *name,
+ const char *parent_name,
void __iomem *base)
{
struct clk *clk;
struct clk_icst *icst;
struct clk_init_data init;
+ struct icst_params *pclone;
icst = kzalloc(sizeof(struct clk_icst), GFP_KERNEL);
if (!icst) {
pr_err("could not allocate ICST clock!\n");
return ERR_PTR(-ENOMEM);
}
+
+ pclone = kmemdup(desc->params, sizeof(*pclone), GFP_KERNEL);
+ if (!pclone) {
+ pr_err("could not clone ICST params\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
init.name = name;
init.ops = &icst_ops;
init.flags = CLK_IS_ROOT;
- init.parent_names = NULL;
- init.num_parents = 0;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
icst->hw.init = &init;
- icst->params = desc->params;
+ icst->params = pclone;
icst->vcoreg = base + desc->vco_offset;
icst->lockreg = base + desc->lock_offset;
diff --git a/drivers/clk/versatile/clk-icst.h b/drivers/clk/versatile/clk-icst.h
index be99dd0da785..04e6f0aef588 100644
--- a/drivers/clk/versatile/clk-icst.h
+++ b/drivers/clk/versatile/clk-icst.h
@@ -16,4 +16,5 @@ struct clk_icst_desc {
struct clk *icst_clk_register(struct device *dev,
const struct clk_icst_desc *desc,
const char *name,
+ const char *parent_name,
void __iomem *base);
diff --git a/drivers/clk/versatile/clk-impd1.c b/drivers/clk/versatile/clk-impd1.c
index 844f8d711a12..6d8b8e1a080a 100644
--- a/drivers/clk/versatile/clk-impd1.c
+++ b/drivers/clk/versatile/clk-impd1.c
@@ -93,13 +93,15 @@ void integrator_impd1_clk_init(void __iomem *base, unsigned int id)
imc = &impd1_clks[id];
imc->vco1name = kasprintf(GFP_KERNEL, "lm%x-vco1", id);
- clk = icst_clk_register(NULL, &impd1_icst1_desc, imc->vco1name, base);
+ clk = icst_clk_register(NULL, &impd1_icst1_desc, imc->vco1name, NULL,
+ base);
imc->vco1clk = clk;
imc->clks[0] = clkdev_alloc(clk, NULL, "lm%x:01000", id);
/* VCO2 is also called "CLK2" */
imc->vco2name = kasprintf(GFP_KERNEL, "lm%x-vco2", id);
- clk = icst_clk_register(NULL, &impd1_icst2_desc, imc->vco2name, base);
+ clk = icst_clk_register(NULL, &impd1_icst2_desc, imc->vco2name, NULL,
+ base);
imc->vco2clk = clk;
/* MMCI uses CLK2 right off */
diff --git a/drivers/clk/versatile/clk-integrator.c b/drivers/clk/versatile/clk-integrator.c
index bda8967e09c2..734c4b8fe6ab 100644
--- a/drivers/clk/versatile/clk-integrator.c
+++ b/drivers/clk/versatile/clk-integrator.c
@@ -10,21 +10,17 @@
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/err.h>
-#include <linux/platform_data/clk-integrator.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include "clk-icst.h"
-/*
- * Implementation of the ARM Integrator/AP and Integrator/CP clock tree.
- * Inspired by portions of:
- * plat-versatile/clock.c and plat-versatile/include/plat/clock.h
- */
+#define INTEGRATOR_HDR_LOCK_OFFSET 0x14
-static const struct icst_params cp_auxvco_params = {
- .ref = 24000000,
+/* Base offset for the core module */
+static void __iomem *cm_base;
+
+static const struct icst_params cp_auxosc_params = {
.vco_max = ICST525_VCO_MAX_5V,
.vco_min = ICST525_VCO_MIN,
.vd_min = 8,
@@ -35,50 +31,39 @@ static const struct icst_params cp_auxvco_params = {
.idx2s = icst525_idx2s,
};
-static const struct clk_icst_desc __initdata cp_icst_desc = {
- .params = &cp_auxvco_params,
+static const struct clk_icst_desc __initdata cm_auxosc_desc = {
+ .params = &cp_auxosc_params,
.vco_offset = 0x1c,
.lock_offset = INTEGRATOR_HDR_LOCK_OFFSET,
};
-/*
- * integrator_clk_init() - set up the integrator clock tree
- * @is_cp: pass true if it's the Integrator/CP else AP is assumed
- */
-void __init integrator_clk_init(bool is_cp)
+static void __init of_integrator_cm_osc_setup(struct device_node *np)
{
- struct clk *clk;
-
- /* APB clock dummy */
- clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
- clk_register_clkdev(clk, "apb_pclk", NULL);
-
- /* UART reference clock */
- clk = clk_register_fixed_rate(NULL, "uartclk", NULL, CLK_IS_ROOT,
- 14745600);
- clk_register_clkdev(clk, NULL, "uart0");
- clk_register_clkdev(clk, NULL, "uart1");
- if (is_cp)
- clk_register_clkdev(clk, NULL, "mmci");
-
- /* 24 MHz clock */
- clk = clk_register_fixed_rate(NULL, "clk24mhz", NULL, CLK_IS_ROOT,
- 24000000);
- clk_register_clkdev(clk, NULL, "kmi0");
- clk_register_clkdev(clk, NULL, "kmi1");
- if (!is_cp)
- clk_register_clkdev(clk, NULL, "ap_timer");
+ struct clk *clk = ERR_PTR(-EINVAL);
+ const char *clk_name = np->name;
+ const struct clk_icst_desc *desc = &cm_auxosc_desc;
+ const char *parent_name;
- if (!is_cp)
- return;
+ if (!cm_base) {
+ /* Remap the core module base if not done yet */
+ struct device_node *parent;
- /* 1 MHz clock */
- clk = clk_register_fixed_rate(NULL, "clk1mhz", NULL, CLK_IS_ROOT,
- 1000000);
- clk_register_clkdev(clk, NULL, "sp804");
+ parent = of_get_parent(np);
+ if (!np) {
+ pr_err("no parent on core module clock\n");
+ return;
+ }
+ cm_base = of_iomap(parent, 0);
+ if (!cm_base) {
+ pr_err("could not remap core module base\n");
+ return;
+ }
+ }
- /* ICST VCO clock used on the Integrator/CP CLCD */
- clk = icst_clk_register(NULL, &cp_icst_desc, "icst",
- __io_address(INTEGRATOR_HDR_BASE));
- clk_register_clkdev(clk, NULL, "clcd");
+ parent_name = of_clk_get_parent_name(np, 0);
+ clk = icst_clk_register(NULL, desc, clk_name, parent_name, cm_base);
+ if (!IS_ERR(clk))
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
}
+CLK_OF_DECLARE(integrator_cm_auxosc_clk,
+ "arm,integrator-cm-auxosc", of_integrator_cm_osc_setup);
diff --git a/drivers/clk/versatile/clk-realview.c b/drivers/clk/versatile/clk-realview.c
index 747e7b31117c..c8b523117fb7 100644
--- a/drivers/clk/versatile/clk-realview.c
+++ b/drivers/clk/versatile/clk-realview.c
@@ -85,10 +85,10 @@ void __init realview_clk_init(void __iomem *sysbase, bool is_pb1176)
/* ICST VCO clock */
if (is_pb1176)
clk = icst_clk_register(NULL, &realview_osc0_desc,
- "osc0", sysbase);
+ "osc0", NULL, sysbase);
else
clk = icst_clk_register(NULL, &realview_osc4_desc,
- "osc4", sysbase);
+ "osc4", NULL, sysbase);
clk_register_clkdev(clk, NULL, "dev:clcd");
clk_register_clkdev(clk, NULL, "issp:clcd");
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 9fb627046e17..1e2b9db563ec 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -122,7 +122,7 @@ config ARM_INTEGRATOR
If in doubt, say Y.
config ARM_KIRKWOOD_CPUFREQ
- def_bool ARCH_KIRKWOOD && OF
+ def_bool MACH_KIRKWOOD
help
This adds the CPUFreq driver for Marvell Kirkwood
SoCs.
diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
index d988948a89a0..97ccc31dbdd8 100644
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -22,7 +22,7 @@ config ARM_HIGHBANK_CPUIDLE
config ARM_KIRKWOOD_CPUIDLE
bool "CPU Idle Driver for Marvell Kirkwood SoCs"
- depends on ARCH_KIRKWOOD
+ depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
help
This adds the CPU Idle driver for Marvell Kirkwood SoCs.
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 92d8e9a064b4..a86c49a605c6 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -210,7 +210,7 @@ config GPIO_MSM_V1
config GPIO_MSM_V2
tristate "Qualcomm MSM GPIO v2"
- depends on GPIOLIB && OF && ARCH_MSM
+ depends on GPIOLIB && OF && ARCH_QCOM
help
Say yes here to support the GPIO interface on ARM v7 based
Qualcomm MSM chips. Most of the pins on the MSM can be
diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index c69d1e07a3a6..b6984971ce0c 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -3,7 +3,7 @@ config DRM_MSM
tristate "MSM DRM"
depends on DRM
depends on MSM_IOMMU
- depends on (ARCH_MSM && ARCH_MSM8960) || (ARM && COMPILE_TEST)
+ depends on ARCH_MSM8960 || (ARM && COMPILE_TEST)
select DRM_KMS_HELPER
select SHMEM
select TMPFS
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index ec42d2decb2f..d770f7406631 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -77,3 +77,11 @@ config VERSATILE_FPGA_IRQ_NR
config XTENSA_MX
bool
select IRQ_DOMAIN
+
+config IRQ_CROSSBAR
+ bool
+ help
+ Support for a CROSSBAR ip that preceeds the main interrupt controller.
+ The primary irqchip invokes the crossbar's callback which inturn allocates
+ a free irq and configures the IP. Thus the peripheral interrupts are
+ routed to one of the free irqchip interrupt lines.
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 6cee9efa26e7..f180f8d5fb7b 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -28,3 +28,4 @@ obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o
obj-$(CONFIG_TB10X_IRQC) += irq-tb10x.o
obj-$(CONFIG_XTENSA) += irq-xtensa-pic.o
obj-$(CONFIG_XTENSA_MX) += irq-xtensa-mx.o
+obj-$(CONFIG_IRQ_CROSSBAR) += irq-crossbar.o
diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c
new file mode 100644
index 000000000000..fc817d28d1fe
--- /dev/null
+++ b/drivers/irqchip/irq-crossbar.c
@@ -0,0 +1,208 @@
+/*
+ * drivers/irqchip/irq-crossbar.c
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Sricharan R <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+#include <linux/irqchip/arm-gic.h>
+
+#define IRQ_FREE -1
+#define GIC_IRQ_START 32
+
+/*
+ * @int_max: maximum number of supported interrupts
+ * @irq_map: array of interrupts to crossbar number mapping
+ * @crossbar_base: crossbar base address
+ * @register_offsets: offsets for each irq number
+ */
+struct crossbar_device {
+ uint int_max;
+ uint *irq_map;
+ void __iomem *crossbar_base;
+ int *register_offsets;
+ void (*write) (int, int);
+};
+
+static struct crossbar_device *cb;
+
+static inline void crossbar_writel(int irq_no, int cb_no)
+{
+ writel(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]);
+}
+
+static inline void crossbar_writew(int irq_no, int cb_no)
+{
+ writew(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]);
+}
+
+static inline void crossbar_writeb(int irq_no, int cb_no)
+{
+ writeb(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]);
+}
+
+static inline int allocate_free_irq(int cb_no)
+{
+ int i;
+
+ for (i = 0; i < cb->int_max; i++) {
+ if (cb->irq_map[i] == IRQ_FREE) {
+ cb->irq_map[i] = cb_no;
+ return i;
+ }
+ }
+
+ return -ENODEV;
+}
+
+static int crossbar_domain_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hw)
+{
+ cb->write(hw - GIC_IRQ_START, cb->irq_map[hw - GIC_IRQ_START]);
+ return 0;
+}
+
+static void crossbar_domain_unmap(struct irq_domain *d, unsigned int irq)
+{
+ irq_hw_number_t hw = irq_get_irq_data(irq)->hwirq;
+
+ if (hw > GIC_IRQ_START)
+ cb->irq_map[hw - GIC_IRQ_START] = IRQ_FREE;
+}
+
+static int crossbar_domain_xlate(struct irq_domain *d,
+ struct device_node *controller,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq,
+ unsigned int *out_type)
+{
+ unsigned long ret;
+
+ ret = allocate_free_irq(intspec[1]);
+
+ if (IS_ERR_VALUE(ret))
+ return ret;
+
+ *out_hwirq = ret + GIC_IRQ_START;
+ return 0;
+}
+
+const struct irq_domain_ops routable_irq_domain_ops = {
+ .map = crossbar_domain_map,
+ .unmap = crossbar_domain_unmap,
+ .xlate = crossbar_domain_xlate
+};
+
+static int __init crossbar_of_init(struct device_node *node)
+{
+ int i, size, max, reserved = 0, entry;
+ const __be32 *irqsr;
+
+ cb = kzalloc(sizeof(struct cb_device *), GFP_KERNEL);
+
+ if (!cb)
+ return -ENOMEM;
+
+ cb->crossbar_base = of_iomap(node, 0);
+ if (!cb->crossbar_base)
+ goto err1;
+
+ of_property_read_u32(node, "ti,max-irqs", &max);
+ cb->irq_map = kzalloc(max * sizeof(int), GFP_KERNEL);
+ if (!cb->irq_map)
+ goto err2;
+
+ cb->int_max = max;
+
+ for (i = 0; i < max; i++)
+ cb->irq_map[i] = IRQ_FREE;
+
+ /* Get and mark reserved irqs */
+ irqsr = of_get_property(node, "ti,irqs-reserved", &size);
+ if (irqsr) {
+ size /= sizeof(__be32);
+
+ for (i = 0; i < size; i++) {
+ of_property_read_u32_index(node,
+ "ti,irqs-reserved",
+ i, &entry);
+ if (entry > max) {
+ pr_err("Invalid reserved entry\n");
+ goto err3;
+ }
+ cb->irq_map[entry] = 0;
+ }
+ }
+
+ cb->register_offsets = kzalloc(max * sizeof(int), GFP_KERNEL);
+ if (!cb->register_offsets)
+ goto err3;
+
+ of_property_read_u32(node, "ti,reg-size", &size);
+
+ switch (size) {
+ case 1:
+ cb->write = crossbar_writeb;
+ break;
+ case 2:
+ cb->write = crossbar_writew;
+ break;
+ case 4:
+ cb->write = crossbar_writel;
+ break;
+ default:
+ pr_err("Invalid reg-size property\n");
+ goto err4;
+ break;
+ }
+
+ /*
+ * Register offsets are not linear because of the
+ * reserved irqs. so find and store the offsets once.
+ */
+ for (i = 0; i < max; i++) {
+ if (!cb->irq_map[i])
+ continue;
+
+ cb->register_offsets[i] = reserved;
+ reserved += size;
+ }
+
+ register_routable_domain_ops(&routable_irq_domain_ops);
+ return 0;
+
+err4:
+ kfree(cb->register_offsets);
+err3:
+ kfree(cb->irq_map);
+err2:
+ iounmap(cb->crossbar_base);
+err1:
+ kfree(cb);
+ return -ENOMEM;
+}
+
+static const struct of_device_id crossbar_match[] __initconst = {
+ { .compatible = "ti,irq-crossbar" },
+ {}
+};
+
+int __init irqcrossbar_init(void)
+{
+ struct device_node *np;
+ np = of_find_matching_node(NULL, crossbar_match);
+ if (!np)
+ return -ENODEV;
+
+ crossbar_of_init(np);
+ return 0;
+}
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 63922b9ba6b7..4300b6606f5e 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -824,16 +824,25 @@ static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
irq_set_chip_and_handler(irq, &gic_chip,
handle_fasteoi_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+
+ gic_routable_irq_domain_ops->map(d, irq, hw);
}
irq_set_chip_data(irq, d->host_data);
return 0;
}
+static void gic_irq_domain_unmap(struct irq_domain *d, unsigned int irq)
+{
+ gic_routable_irq_domain_ops->unmap(d, irq);
+}
+
static int gic_irq_domain_xlate(struct irq_domain *d,
struct device_node *controller,
const u32 *intspec, unsigned int intsize,
unsigned long *out_hwirq, unsigned int *out_type)
{
+ unsigned long ret = 0;
+
if (d->of_node != controller)
return -EINVAL;
if (intsize < 3)
@@ -843,11 +852,20 @@ static int gic_irq_domain_xlate(struct irq_domain *d,
*out_hwirq = intspec[1] + 16;
/* For SPIs, we need to add 16 more to get the GIC irq ID number */
- if (!intspec[0])
- *out_hwirq += 16;
+ if (!intspec[0]) {
+ ret = gic_routable_irq_domain_ops->xlate(d, controller,
+ intspec,
+ intsize,
+ out_hwirq,
+ out_type);
+
+ if (IS_ERR_VALUE(ret))
+ return ret;
+ }
*out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
- return 0;
+
+ return ret;
}
#ifdef CONFIG_SMP
@@ -871,9 +889,41 @@ static struct notifier_block gic_cpu_notifier = {
static const struct irq_domain_ops gic_irq_domain_ops = {
.map = gic_irq_domain_map,
+ .unmap = gic_irq_domain_unmap,
.xlate = gic_irq_domain_xlate,
};
+/* Default functions for routable irq domain */
+static int gic_routable_irq_domain_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hw)
+{
+ return 0;
+}
+
+static void gic_routable_irq_domain_unmap(struct irq_domain *d,
+ unsigned int irq)
+{
+}
+
+static int gic_routable_irq_domain_xlate(struct irq_domain *d,
+ struct device_node *controller,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq,
+ unsigned int *out_type)
+{
+ *out_hwirq += 16;
+ return 0;
+}
+
+const struct irq_domain_ops gic_default_routable_irq_domain_ops = {
+ .map = gic_routable_irq_domain_map,
+ .unmap = gic_routable_irq_domain_unmap,
+ .xlate = gic_routable_irq_domain_xlate,
+};
+
+const struct irq_domain_ops *gic_routable_irq_domain_ops =
+ &gic_default_routable_irq_domain_ops;
+
void __init gic_init_bases(unsigned int gic_nr, int irq_start,
void __iomem *dist_base, void __iomem *cpu_base,
u32 percpu_offset, struct device_node *node)
@@ -881,6 +931,7 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
irq_hw_number_t hwirq_base;
struct gic_chip_data *gic;
int gic_irqs, irq_base, i;
+ int nr_routable_irqs;
BUG_ON(gic_nr >= MAX_GIC_NR);
@@ -946,14 +997,25 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
gic->gic_irqs = gic_irqs;
gic_irqs -= hwirq_base; /* calculate # of irqs to allocate */
- irq_base = irq_alloc_descs(irq_start, 16, gic_irqs, numa_node_id());
- if (IS_ERR_VALUE(irq_base)) {
- WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
- irq_start);
- irq_base = irq_start;
+
+ if (of_property_read_u32(node, "arm,routable-irqs",
+ &nr_routable_irqs)) {
+ irq_base = irq_alloc_descs(irq_start, 16, gic_irqs,
+ numa_node_id());
+ if (IS_ERR_VALUE(irq_base)) {
+ WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
+ irq_start);
+ irq_base = irq_start;
+ }
+
+ gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base,
+ hwirq_base, &gic_irq_domain_ops, gic);
+ } else {
+ gic->domain = irq_domain_add_linear(node, nr_routable_irqs,
+ &gic_irq_domain_ops,
+ gic);
}
- gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base,
- hwirq_base, &gic_irq_domain_ops, gic);
+
if (WARN_ON(!gic->domain))
return;
diff --git a/drivers/irqchip/irq-vic.c b/drivers/irqchip/irq-vic.c
index 473f09a74d4d..37dab0b472cd 100644
--- a/drivers/irqchip/irq-vic.c
+++ b/drivers/irqchip/irq-vic.c
@@ -57,6 +57,7 @@
/**
* struct vic_device - VIC PM device
+ * @parent_irq: The parent IRQ number of the VIC if cascaded, or 0.
* @irq: The IRQ number for the base of the VIC.
* @base: The register base for the VIC.
* @valid_sources: A bitmask of valid interrupts
@@ -224,6 +225,17 @@ static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
return handled;
}
+static void vic_handle_irq_cascaded(unsigned int irq, struct irq_desc *desc)
+{
+ u32 stat, hwirq;
+ struct vic_device *vic = irq_desc_get_handler_data(desc);
+
+ while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) {
+ hwirq = ffs(stat) - 1;
+ generic_handle_irq(irq_find_mapping(vic->domain, hwirq));
+ }
+}
+
/*
* Keep iterating over all registered VIC's until there are no pending
* interrupts.
@@ -246,6 +258,7 @@ static struct irq_domain_ops vic_irqdomain_ops = {
/**
* vic_register() - Register a VIC.
* @base: The base address of the VIC.
+ * @parent_irq: The parent IRQ if cascaded, else 0.
* @irq: The base IRQ for the VIC.
* @valid_sources: bitmask of valid interrupts
* @resume_sources: bitmask of interrupts allowed for resume sources.
@@ -257,7 +270,8 @@ static struct irq_domain_ops vic_irqdomain_ops = {
*
* This also configures the IRQ domain for the VIC.
*/
-static void __init vic_register(void __iomem *base, unsigned int irq,
+static void __init vic_register(void __iomem *base, unsigned int parent_irq,
+ unsigned int irq,
u32 valid_sources, u32 resume_sources,
struct device_node *node)
{
@@ -273,15 +287,25 @@ static void __init vic_register(void __iomem *base, unsigned int irq,
v->base = base;
v->valid_sources = valid_sources;
v->resume_sources = resume_sources;
- v->irq = irq;
set_handle_irq(vic_handle_irq);
vic_id++;
+
+ if (parent_irq) {
+ irq_set_handler_data(parent_irq, v);
+ irq_set_chained_handler(parent_irq, vic_handle_irq_cascaded);
+ }
+
v->domain = irq_domain_add_simple(node, fls(valid_sources), irq,
&vic_irqdomain_ops, v);
/* create an IRQ mapping for each valid IRQ */
for (i = 0; i < fls(valid_sources); i++)
if (valid_sources & (1 << i))
irq_create_mapping(v->domain, i);
+ /* If no base IRQ was passed, figure out our allocated base */
+ if (irq)
+ v->irq = irq;
+ else
+ v->irq = irq_find_mapping(v->domain, 0);
}
static void vic_ack_irq(struct irq_data *d)
@@ -409,10 +433,10 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
writel(32, base + VIC_PL190_DEF_VECT_ADDR);
}
- vic_register(base, irq_start, vic_sources, 0, node);
+ vic_register(base, 0, irq_start, vic_sources, 0, node);
}
-void __init __vic_init(void __iomem *base, int irq_start,
+void __init __vic_init(void __iomem *base, int parent_irq, int irq_start,
u32 vic_sources, u32 resume_sources,
struct device_node *node)
{
@@ -449,7 +473,7 @@ void __init __vic_init(void __iomem *base, int irq_start,
vic_init2(base);
- vic_register(base, irq_start, vic_sources, resume_sources, node);
+ vic_register(base, parent_irq, irq_start, vic_sources, resume_sources, node);
}
/**
@@ -462,8 +486,30 @@ void __init __vic_init(void __iomem *base, int irq_start,
void __init vic_init(void __iomem *base, unsigned int irq_start,
u32 vic_sources, u32 resume_sources)
{
- __vic_init(base, irq_start, vic_sources, resume_sources, NULL);
+ __vic_init(base, 0, irq_start, vic_sources, resume_sources, NULL);
+}
+
+/**
+ * vic_init_cascaded() - initialise a cascaded vectored interrupt controller
+ * @base: iomem base address
+ * @parent_irq: the parent IRQ we're cascaded off
+ * @irq_start: starting interrupt number, must be muliple of 32
+ * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
+ *
+ * This returns the base for the new interrupts or negative on error.
+ */
+int __init vic_init_cascaded(void __iomem *base, unsigned int parent_irq,
+ u32 vic_sources, u32 resume_sources)
+{
+ struct vic_device *v;
+
+ v = &vic_devices[vic_id];
+ __vic_init(base, parent_irq, 0, vic_sources, resume_sources, NULL);
+ /* Return out acquired base */
+ return v->irq;
}
+EXPORT_SYMBOL_GPL(vic_init_cascaded);
#ifdef CONFIG_OF
int __init vic_of_init(struct device_node *node, struct device_node *parent)
@@ -485,7 +531,7 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent)
/*
* Passing 0 as first IRQ makes the simple domain allocate descriptors
*/
- __vic_init(regs, 0, interrupt_mask, wakeup_mask, node);
+ __vic_init(regs, 0, 0, interrupt_mask, wakeup_mask, node);
return 0;
}
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 72156c123033..44c358ecf5a1 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -421,7 +421,7 @@ config LEDS_MC13783
config LEDS_NS2
tristate "LED support for Network Space v2 GPIO LEDs"
depends on LEDS_CLASS
- depends on ARCH_KIRKWOOD
+ depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
default y
help
This option enable support for the dual-GPIO LED found on the
@@ -431,7 +431,7 @@ config LEDS_NS2
config LEDS_NETXBIG
tristate "LED support for Big Network series LEDs"
depends on LEDS_CLASS
- depends on ARCH_KIRKWOOD
+ depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
default y
help
This option enable support for LEDs found on the LaCie 2Big
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index a4989ec6292e..8eb6a36f125a 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -746,28 +746,6 @@ static int nand_davinci_probe(struct platform_device *pdev)
goto err_clk_enable;
}
- /*
- * Setup Async configuration register in case we did not boot from
- * NAND and so bootloader did not bother to set it up.
- */
- val = davinci_nand_readl(info, A1CR_OFFSET + info->core_chipsel * 4);
-
- /* Extended Wait is not valid and Select Strobe mode is not used */
- val &= ~(ACR_ASIZE_MASK | ACR_EW_MASK | ACR_SS_MASK);
- if (info->chip.options & NAND_BUSWIDTH_16)
- val |= 0x1;
-
- davinci_nand_writel(info, A1CR_OFFSET + info->core_chipsel * 4, val);
-
- ret = 0;
- if (info->timing)
- ret = davinci_aemif_setup_timing(info->timing, info->base,
- info->core_chipsel);
- if (ret < 0) {
- dev_dbg(&pdev->dev, "NAND timing values setup fail\n");
- goto err;
- }
-
spin_lock_irq(&davinci_nand_lock);
/* put CSxNAND into NAND mode */
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 8d3c49cc500f..3bb05f17b9b4 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -27,7 +27,7 @@ config PHY_EXYNOS_MIPI_VIDEO
config PHY_MVEBU_SATA
def_bool y
- depends on ARCH_KIRKWOOD || ARCH_DOVE || MACH_DOVE
+ depends on ARCH_KIRKWOOD || ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
depends on OF
select GENERIC_PHY
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 6d452a78b19c..fa0e4e057b99 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -22,7 +22,7 @@ config POWER_RESET_GPIO
config POWER_RESET_MSM
bool "Qualcomm MSM power-off driver"
- depends on POWER_RESET && ARCH_MSM
+ depends on POWER_RESET && ARCH_QCOM
help
Power off and restart support for Qualcomm boards.
diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c
index 37f56f7ee926..a75db7f8a92f 100644
--- a/drivers/power/reset/qnap-poweroff.c
+++ b/drivers/power/reset/qnap-poweroff.c
@@ -1,5 +1,5 @@
/*
- * QNAP Turbo NAS Board power off
+ * QNAP Turbo NAS Board power off. Can also be used on Synology devices.
*
* Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
*
@@ -25,17 +25,43 @@
#define UART1_REG(x) (base + ((UART_##x) << 2))
+struct power_off_cfg {
+ u32 baud;
+ char cmd;
+};
+
+static const struct power_off_cfg qnap_power_off_cfg = {
+ .baud = 19200,
+ .cmd = 'A',
+};
+
+static const struct power_off_cfg synology_power_off_cfg = {
+ .baud = 9600,
+ .cmd = '1',
+};
+
+static const struct of_device_id qnap_power_off_of_match_table[] = {
+ { .compatible = "qnap,power-off",
+ .data = &qnap_power_off_cfg,
+ },
+ { .compatible = "synology,power-off",
+ .data = &synology_power_off_cfg,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
+
static void __iomem *base;
static unsigned long tclk;
+static const struct power_off_cfg *cfg;
static void qnap_power_off(void)
{
- /* 19200 baud divisor */
- const unsigned divisor = ((tclk + (8 * 19200)) / (16 * 19200));
+ const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud));
pr_err("%s: triggering power-off...\n", __func__);
- /* hijack UART1 and reset into sane state (19200,8n1) */
+ /* hijack UART1 and reset into sane state */
writel(0x83, UART1_REG(LCR));
writel(divisor & 0xff, UART1_REG(DLL));
writel((divisor >> 8) & 0xff, UART1_REG(DLM));
@@ -44,16 +70,21 @@ static void qnap_power_off(void)
writel(0x00, UART1_REG(FCR));
writel(0x00, UART1_REG(MCR));
- /* send the power-off command 'A' to PIC */
- writel('A', UART1_REG(TX));
+ /* send the power-off command to PIC */
+ writel(cfg->cmd, UART1_REG(TX));
}
static int qnap_power_off_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
struct resource *res;
struct clk *clk;
char symname[KSYM_NAME_LEN];
+ const struct of_device_id *match =
+ of_match_node(qnap_power_off_of_match_table, np);
+ cfg = match->data;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Missing resource");
@@ -94,12 +125,6 @@ static int qnap_power_off_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id qnap_power_off_of_match_table[] = {
- { .compatible = "qnap,power-off", },
- {}
-};
-MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
-
static struct platform_driver qnap_power_off_driver = {
.probe = qnap_power_off_probe,
.remove = qnap_power_off_remove,
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index c9d04f797862..0615f50a14cd 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -11,3 +11,5 @@ menuconfig RESET_CONTROLLER
via GPIOs or SoC-internal reset controller modules.
If unsure, say no.
+
+source "drivers/reset/sti/Kconfig"
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index cc29832c9638..4f60caf750ce 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_RESET_CONTROLLER) += core.o
obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
+obj-$(CONFIG_ARCH_STI) += sti/
diff --git a/drivers/reset/core.c b/drivers/reset/core.c
index d1b6089a0ef8..baeaf82d40d9 100644
--- a/drivers/reset/core.c
+++ b/drivers/reset/core.c
@@ -43,7 +43,7 @@ struct reset_control {
* This simple translation function should be used for reset controllers
* with 1:1 mapping, where reset lines can be indexed by number without gaps.
*/
-int of_reset_simple_xlate(struct reset_controller_dev *rcdev,
+static int of_reset_simple_xlate(struct reset_controller_dev *rcdev,
const struct of_phandle_args *reset_spec)
{
if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells))
@@ -54,7 +54,6 @@ int of_reset_simple_xlate(struct reset_controller_dev *rcdev,
return reset_spec->args[0];
}
-EXPORT_SYMBOL_GPL(of_reset_simple_xlate);
/**
* reset_controller_register - register a reset controller device
@@ -127,15 +126,16 @@ int reset_control_deassert(struct reset_control *rstc)
EXPORT_SYMBOL_GPL(reset_control_deassert);
/**
- * reset_control_get - Lookup and obtain a reference to a reset controller.
- * @dev: device to be reset by the controller
+ * of_reset_control_get - Lookup and obtain a reference to a reset controller.
+ * @node: device to be reset by the controller
* @id: reset line name
*
* Returns a struct reset_control or IS_ERR() condition containing errno.
*
* Use of id names is optional.
*/
-struct reset_control *reset_control_get(struct device *dev, const char *id)
+struct reset_control *of_reset_control_get(struct device_node *node,
+ const char *id)
{
struct reset_control *rstc = ERR_PTR(-EPROBE_DEFER);
struct reset_controller_dev *r, *rcdev;
@@ -144,13 +144,10 @@ struct reset_control *reset_control_get(struct device *dev, const char *id)
int rstc_id;
int ret;
- if (!dev)
- return ERR_PTR(-EINVAL);
-
if (id)
- index = of_property_match_string(dev->of_node,
+ index = of_property_match_string(node,
"reset-names", id);
- ret = of_parse_phandle_with_args(dev->of_node, "resets", "#reset-cells",
+ ret = of_parse_phandle_with_args(node, "resets", "#reset-cells",
index, &args);
if (ret)
return ERR_PTR(ret);
@@ -167,7 +164,7 @@ struct reset_control *reset_control_get(struct device *dev, const char *id)
if (!rcdev) {
mutex_unlock(&reset_controller_list_mutex);
- return ERR_PTR(-ENODEV);
+ return ERR_PTR(-EPROBE_DEFER);
}
rstc_id = rcdev->of_xlate(rcdev, &args);
@@ -185,12 +182,35 @@ struct reset_control *reset_control_get(struct device *dev, const char *id)
return ERR_PTR(-ENOMEM);
}
- rstc->dev = dev;
rstc->rcdev = rcdev;
rstc->id = rstc_id;
return rstc;
}
+EXPORT_SYMBOL_GPL(of_reset_control_get);
+
+/**
+ * reset_control_get - Lookup and obtain a reference to a reset controller.
+ * @dev: device to be reset by the controller
+ * @id: reset line name
+ *
+ * Returns a struct reset_control or IS_ERR() condition containing errno.
+ *
+ * Use of id names is optional.
+ */
+struct reset_control *reset_control_get(struct device *dev, const char *id)
+{
+ struct reset_control *rstc;
+
+ if (!dev)
+ return ERR_PTR(-EINVAL);
+
+ rstc = of_reset_control_get(dev->of_node, id);
+ if (!IS_ERR(rstc))
+ rstc->dev = dev;
+
+ return rstc;
+}
EXPORT_SYMBOL_GPL(reset_control_get);
/**
@@ -243,33 +263,6 @@ struct reset_control *devm_reset_control_get(struct device *dev, const char *id)
}
EXPORT_SYMBOL_GPL(devm_reset_control_get);
-static int devm_reset_control_match(struct device *dev, void *res, void *data)
-{
- struct reset_control **rstc = res;
- if (WARN_ON(!rstc || !*rstc))
- return 0;
- return *rstc == data;
-}
-
-/**
- * devm_reset_control_put - resource managed reset_control_put()
- * @rstc: reset controller to free
- *
- * Deallocate a reset control allocated withd devm_reset_control_get().
- * This function will not need to be called normally, as devres will take
- * care of freeing the resource.
- */
-void devm_reset_control_put(struct reset_control *rstc)
-{
- int ret;
-
- ret = devres_release(rstc->dev, devm_reset_control_release,
- devm_reset_control_match, rstc);
- if (ret)
- WARN_ON(ret);
-}
-EXPORT_SYMBOL_GPL(devm_reset_control_put);
-
/**
* device_reset - find reset controller associated with the device
* and perform reset
diff --git a/drivers/reset/sti/Kconfig b/drivers/reset/sti/Kconfig
new file mode 100644
index 000000000000..88d2d0316613
--- /dev/null
+++ b/drivers/reset/sti/Kconfig
@@ -0,0 +1,15 @@
+if ARCH_STI
+
+config STI_RESET_SYSCFG
+ bool
+ select RESET_CONTROLLER
+
+config STIH415_RESET
+ bool
+ select STI_RESET_SYSCFG
+
+config STIH416_RESET
+ bool
+ select STI_RESET_SYSCFG
+
+endif
diff --git a/drivers/reset/sti/Makefile b/drivers/reset/sti/Makefile
new file mode 100644
index 000000000000..be1c97647871
--- /dev/null
+++ b/drivers/reset/sti/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_STI_RESET_SYSCFG) += reset-syscfg.o
+
+obj-$(CONFIG_STIH415_RESET) += reset-stih415.o
+obj-$(CONFIG_STIH416_RESET) += reset-stih416.o
diff --git a/drivers/reset/sti/reset-stih415.c b/drivers/reset/sti/reset-stih415.c
new file mode 100644
index 000000000000..e6f6c41abe12
--- /dev/null
+++ b/drivers/reset/sti/reset-stih415.c
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited
+ * Author: Stephen Gallimore <stephen.gallimore@st.com>
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/reset-controller/stih415-resets.h>
+
+#include "reset-syscfg.h"
+
+/*
+ * STiH415 Peripheral powerdown definitions.
+ */
+static const char stih415_front[] = "st,stih415-front-syscfg";
+static const char stih415_rear[] = "st,stih415-rear-syscfg";
+static const char stih415_sbc[] = "st,stih415-sbc-syscfg";
+static const char stih415_lpm[] = "st,stih415-lpm-syscfg";
+
+#define STIH415_PDN_FRONT(_bit) \
+ _SYSCFG_RST_CH(stih415_front, SYSCFG_114, _bit, SYSSTAT_187, _bit)
+
+#define STIH415_PDN_REAR(_cntl, _stat) \
+ _SYSCFG_RST_CH(stih415_rear, SYSCFG_336, _cntl, SYSSTAT_384, _stat)
+
+#define STIH415_SRST_REAR(_reg, _bit) \
+ _SYSCFG_RST_CH_NO_ACK(stih415_rear, _reg, _bit)
+
+#define STIH415_SRST_SBC(_reg, _bit) \
+ _SYSCFG_RST_CH_NO_ACK(stih415_sbc, _reg, _bit)
+
+#define STIH415_SRST_FRONT(_reg, _bit) \
+ _SYSCFG_RST_CH_NO_ACK(stih415_front, _reg, _bit)
+
+#define STIH415_SRST_LPM(_reg, _bit) \
+ _SYSCFG_RST_CH_NO_ACK(stih415_lpm, _reg, _bit)
+
+#define SYSCFG_114 0x38 /* Powerdown request EMI/NAND/Keyscan */
+#define SYSSTAT_187 0x15c /* Powerdown status EMI/NAND/Keyscan */
+
+#define SYSCFG_336 0x90 /* Powerdown request USB/SATA/PCIe */
+#define SYSSTAT_384 0x150 /* Powerdown status USB/SATA/PCIe */
+
+#define SYSCFG_376 0x130 /* Reset generator 0 control 0 */
+#define SYSCFG_166 0x108 /* Softreset Ethernet 0 */
+#define SYSCFG_31 0x7c /* Softreset Ethernet 1 */
+#define LPM_SYSCFG_1 0x4 /* Softreset IRB */
+
+static const struct syscfg_reset_channel_data stih415_powerdowns[] = {
+ [STIH415_EMISS_POWERDOWN] = STIH415_PDN_FRONT(0),
+ [STIH415_NAND_POWERDOWN] = STIH415_PDN_FRONT(1),
+ [STIH415_KEYSCAN_POWERDOWN] = STIH415_PDN_FRONT(2),
+ [STIH415_USB0_POWERDOWN] = STIH415_PDN_REAR(0, 0),
+ [STIH415_USB1_POWERDOWN] = STIH415_PDN_REAR(1, 1),
+ [STIH415_USB2_POWERDOWN] = STIH415_PDN_REAR(2, 2),
+ [STIH415_SATA0_POWERDOWN] = STIH415_PDN_REAR(3, 3),
+ [STIH415_SATA1_POWERDOWN] = STIH415_PDN_REAR(4, 4),
+ [STIH415_PCIE_POWERDOWN] = STIH415_PDN_REAR(5, 8),
+};
+
+static const struct syscfg_reset_channel_data stih415_softresets[] = {
+ [STIH415_ETH0_SOFTRESET] = STIH415_SRST_FRONT(SYSCFG_166, 0),
+ [STIH415_ETH1_SOFTRESET] = STIH415_SRST_SBC(SYSCFG_31, 0),
+ [STIH415_IRB_SOFTRESET] = STIH415_SRST_LPM(LPM_SYSCFG_1, 6),
+ [STIH415_USB0_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 9),
+ [STIH415_USB1_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 10),
+ [STIH415_USB2_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 11),
+};
+
+static struct syscfg_reset_controller_data stih415_powerdown_controller = {
+ .wait_for_ack = true,
+ .nr_channels = ARRAY_SIZE(stih415_powerdowns),
+ .channels = stih415_powerdowns,
+};
+
+static struct syscfg_reset_controller_data stih415_softreset_controller = {
+ .wait_for_ack = false,
+ .active_low = true,
+ .nr_channels = ARRAY_SIZE(stih415_softresets),
+ .channels = stih415_softresets,
+};
+
+static struct of_device_id stih415_reset_match[] = {
+ { .compatible = "st,stih415-powerdown",
+ .data = &stih415_powerdown_controller, },
+ { .compatible = "st,stih415-softreset",
+ .data = &stih415_softreset_controller, },
+ {},
+};
+
+static struct platform_driver stih415_reset_driver = {
+ .probe = syscfg_reset_probe,
+ .driver = {
+ .name = "reset-stih415",
+ .owner = THIS_MODULE,
+ .of_match_table = stih415_reset_match,
+ },
+};
+
+static int __init stih415_reset_init(void)
+{
+ return platform_driver_register(&stih415_reset_driver);
+}
+arch_initcall(stih415_reset_init);
diff --git a/drivers/reset/sti/reset-stih416.c b/drivers/reset/sti/reset-stih416.c
new file mode 100644
index 000000000000..fe3bf02bdc8c
--- /dev/null
+++ b/drivers/reset/sti/reset-stih416.c
@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited
+ * Author: Stephen Gallimore <stephen.gallimore@st.com>
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/reset-controller/stih416-resets.h>
+
+#include "reset-syscfg.h"
+
+/*
+ * STiH416 Peripheral powerdown definitions.
+ */
+static const char stih416_front[] = "st,stih416-front-syscfg";
+static const char stih416_rear[] = "st,stih416-rear-syscfg";
+static const char stih416_sbc[] = "st,stih416-sbc-syscfg";
+static const char stih416_lpm[] = "st,stih416-lpm-syscfg";
+static const char stih416_cpu[] = "st,stih416-cpu-syscfg";
+
+#define STIH416_PDN_FRONT(_bit) \
+ _SYSCFG_RST_CH(stih416_front, SYSCFG_1500, _bit, SYSSTAT_1578, _bit)
+
+#define STIH416_PDN_REAR(_cntl, _stat) \
+ _SYSCFG_RST_CH(stih416_rear, SYSCFG_2525, _cntl, SYSSTAT_2583, _stat)
+
+#define SYSCFG_1500 0x7d0 /* Powerdown request EMI/NAND/Keyscan */
+#define SYSSTAT_1578 0x908 /* Powerdown status EMI/NAND/Keyscan */
+
+#define SYSCFG_2525 0x834 /* Powerdown request USB/SATA/PCIe */
+#define SYSSTAT_2583 0x91c /* Powerdown status USB/SATA/PCIe */
+
+#define SYSCFG_2552 0x8A0 /* Reset Generator control 0 */
+#define SYSCFG_1539 0x86c /* Softreset Ethernet 0 */
+#define SYSCFG_510 0x7f8 /* Softreset Ethernet 1 */
+#define LPM_SYSCFG_1 0x4 /* Softreset IRB */
+#define SYSCFG_2553 0x8a4 /* Softreset SATA0/1, PCIE0/1 */
+#define SYSCFG_7563 0x8cc /* MPE softresets 0 */
+#define SYSCFG_7564 0x8d0 /* MPE softresets 1 */
+
+#define STIH416_SRST_CPU(_reg, _bit) \
+ _SYSCFG_RST_CH_NO_ACK(stih416_cpu, _reg, _bit)
+
+#define STIH416_SRST_FRONT(_reg, _bit) \
+ _SYSCFG_RST_CH_NO_ACK(stih416_front, _reg, _bit)
+
+#define STIH416_SRST_REAR(_reg, _bit) \
+ _SYSCFG_RST_CH_NO_ACK(stih416_rear, _reg, _bit)
+
+#define STIH416_SRST_LPM(_reg, _bit) \
+ _SYSCFG_RST_CH_NO_ACK(stih416_lpm, _reg, _bit)
+
+#define STIH416_SRST_SBC(_reg, _bit) \
+ _SYSCFG_RST_CH_NO_ACK(stih416_sbc, _reg, _bit)
+
+static const struct syscfg_reset_channel_data stih416_powerdowns[] = {
+ [STIH416_EMISS_POWERDOWN] = STIH416_PDN_FRONT(0),
+ [STIH416_NAND_POWERDOWN] = STIH416_PDN_FRONT(1),
+ [STIH416_KEYSCAN_POWERDOWN] = STIH416_PDN_FRONT(2),
+ [STIH416_USB0_POWERDOWN] = STIH416_PDN_REAR(0, 0),
+ [STIH416_USB1_POWERDOWN] = STIH416_PDN_REAR(1, 1),
+ [STIH416_USB2_POWERDOWN] = STIH416_PDN_REAR(2, 2),
+ [STIH416_USB3_POWERDOWN] = STIH416_PDN_REAR(6, 5),
+ [STIH416_SATA0_POWERDOWN] = STIH416_PDN_REAR(3, 3),
+ [STIH416_SATA1_POWERDOWN] = STIH416_PDN_REAR(4, 4),
+ [STIH416_PCIE0_POWERDOWN] = STIH416_PDN_REAR(7, 9),
+ [STIH416_PCIE1_POWERDOWN] = STIH416_PDN_REAR(5, 8),
+};
+
+static const struct syscfg_reset_channel_data stih416_softresets[] = {
+ [STIH416_ETH0_SOFTRESET] = STIH416_SRST_FRONT(SYSCFG_1539, 0),
+ [STIH416_ETH1_SOFTRESET] = STIH416_SRST_SBC(SYSCFG_510, 0),
+ [STIH416_IRB_SOFTRESET] = STIH416_SRST_LPM(LPM_SYSCFG_1, 6),
+ [STIH416_USB0_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 9),
+ [STIH416_USB1_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 10),
+ [STIH416_USB2_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 11),
+ [STIH416_USB3_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 28),
+ [STIH416_SATA0_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 7),
+ [STIH416_SATA1_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 3),
+ [STIH416_PCIE0_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 15),
+ [STIH416_PCIE1_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 2),
+ [STIH416_AUD_DAC_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 14),
+ [STIH416_HDTVOUT_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 5),
+ [STIH416_VTAC_M_RX_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 25),
+ [STIH416_VTAC_A_RX_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 26),
+ [STIH416_SYNC_HD_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 5),
+ [STIH416_SYNC_SD_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 6),
+ [STIH416_BLITTER_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 10),
+ [STIH416_GPU_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 11),
+ [STIH416_VTAC_M_TX_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 18),
+ [STIH416_VTAC_A_TX_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 19),
+ [STIH416_VTG_AUX_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 21),
+ [STIH416_JPEG_DEC_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 23),
+ [STIH416_HVA_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 2),
+ [STIH416_COMPO_M_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 3),
+ [STIH416_COMPO_A_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 4),
+ [STIH416_VP8_DEC_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 10),
+ [STIH416_VTG_MAIN_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 16),
+};
+
+static struct syscfg_reset_controller_data stih416_powerdown_controller = {
+ .wait_for_ack = true,
+ .nr_channels = ARRAY_SIZE(stih416_powerdowns),
+ .channels = stih416_powerdowns,
+};
+
+static struct syscfg_reset_controller_data stih416_softreset_controller = {
+ .wait_for_ack = false,
+ .active_low = true,
+ .nr_channels = ARRAY_SIZE(stih416_softresets),
+ .channels = stih416_softresets,
+};
+
+static struct of_device_id stih416_reset_match[] = {
+ { .compatible = "st,stih416-powerdown",
+ .data = &stih416_powerdown_controller, },
+ { .compatible = "st,stih416-softreset",
+ .data = &stih416_softreset_controller, },
+ {},
+};
+
+static struct platform_driver stih416_reset_driver = {
+ .probe = syscfg_reset_probe,
+ .driver = {
+ .name = "reset-stih416",
+ .owner = THIS_MODULE,
+ .of_match_table = stih416_reset_match,
+ },
+};
+
+static int __init stih416_reset_init(void)
+{
+ return platform_driver_register(&stih416_reset_driver);
+}
+arch_initcall(stih416_reset_init);
diff --git a/drivers/reset/sti/reset-syscfg.c b/drivers/reset/sti/reset-syscfg.c
new file mode 100644
index 000000000000..a145cc066d4a
--- /dev/null
+++ b/drivers/reset/sti/reset-syscfg.c
@@ -0,0 +1,186 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics Limited
+ * Author: Stephen Gallimore <stephen.gallimore@st.com>
+ *
+ * Inspired by mach-imx/src.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/types.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#include "reset-syscfg.h"
+
+/**
+ * Reset channel regmap configuration
+ *
+ * @reset: regmap field for the channel's reset bit.
+ * @ack: regmap field for the channel's ack bit (optional).
+ */
+struct syscfg_reset_channel {
+ struct regmap_field *reset;
+ struct regmap_field *ack;
+};
+
+/**
+ * A reset controller which groups together a set of related reset bits, which
+ * may be located in different system configuration registers.
+ *
+ * @rst: base reset controller structure.
+ * @active_low: are the resets in this controller active low, i.e. clearing
+ * the reset bit puts the hardware into reset.
+ * @channels: An array of reset channels for this controller.
+ */
+struct syscfg_reset_controller {
+ struct reset_controller_dev rst;
+ bool active_low;
+ struct syscfg_reset_channel *channels;
+};
+
+#define to_syscfg_reset_controller(_rst) \
+ container_of(_rst, struct syscfg_reset_controller, rst)
+
+static int syscfg_reset_program_hw(struct reset_controller_dev *rcdev,
+ unsigned long idx, int assert)
+{
+ struct syscfg_reset_controller *rst = to_syscfg_reset_controller(rcdev);
+ const struct syscfg_reset_channel *ch;
+ u32 ctrl_val = rst->active_low ? !assert : !!assert;
+ int err;
+
+ if (idx >= rcdev->nr_resets)
+ return -EINVAL;
+
+ ch = &rst->channels[idx];
+
+ err = regmap_field_write(ch->reset, ctrl_val);
+ if (err)
+ return err;
+
+ if (ch->ack) {
+ unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+ u32 ack_val;
+
+ while (true) {
+ err = regmap_field_read(ch->ack, &ack_val);
+ if (err)
+ return err;
+
+ if (ack_val == ctrl_val)
+ break;
+
+ if (time_after(jiffies, timeout))
+ return -ETIME;
+
+ cpu_relax();
+ }
+ }
+
+ return 0;
+}
+
+static int syscfg_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long idx)
+{
+ return syscfg_reset_program_hw(rcdev, idx, true);
+}
+
+static int syscfg_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long idx)
+{
+ return syscfg_reset_program_hw(rcdev, idx, false);
+}
+
+static int syscfg_reset_dev(struct reset_controller_dev *rcdev,
+ unsigned long idx)
+{
+ int err = syscfg_reset_assert(rcdev, idx);
+ if (err)
+ return err;
+
+ return syscfg_reset_deassert(rcdev, idx);
+}
+
+static struct reset_control_ops syscfg_reset_ops = {
+ .reset = syscfg_reset_dev,
+ .assert = syscfg_reset_assert,
+ .deassert = syscfg_reset_deassert,
+};
+
+static int syscfg_reset_controller_register(struct device *dev,
+ const struct syscfg_reset_controller_data *data)
+{
+ struct syscfg_reset_controller *rc;
+ size_t size;
+ int i, err;
+
+ rc = devm_kzalloc(dev, sizeof(*rc), GFP_KERNEL);
+ if (!rc)
+ return -ENOMEM;
+
+ size = sizeof(struct syscfg_reset_channel) * data->nr_channels;
+
+ rc->channels = devm_kzalloc(dev, size, GFP_KERNEL);
+ if (!rc->channels)
+ return -ENOMEM;
+
+ rc->rst.ops = &syscfg_reset_ops,
+ rc->rst.of_node = dev->of_node;
+ rc->rst.nr_resets = data->nr_channels;
+ rc->active_low = data->active_low;
+
+ for (i = 0; i < data->nr_channels; i++) {
+ struct regmap *map;
+ struct regmap_field *f;
+ const char *compatible = data->channels[i].compatible;
+
+ map = syscon_regmap_lookup_by_compatible(compatible);
+ if (IS_ERR(map))
+ return PTR_ERR(map);
+
+ f = devm_regmap_field_alloc(dev, map, data->channels[i].reset);
+ if (IS_ERR(f))
+ return PTR_ERR(f);
+
+ rc->channels[i].reset = f;
+
+ if (!data->wait_for_ack)
+ continue;
+
+ f = devm_regmap_field_alloc(dev, map, data->channels[i].ack);
+ if (IS_ERR(f))
+ return PTR_ERR(f);
+
+ rc->channels[i].ack = f;
+ }
+
+ err = reset_controller_register(&rc->rst);
+ if (!err)
+ dev_info(dev, "registered\n");
+
+ return err;
+}
+
+int syscfg_reset_probe(struct platform_device *pdev)
+{
+ struct device *dev = pdev ? &pdev->dev : NULL;
+ const struct of_device_id *match;
+
+ if (!dev || !dev->driver)
+ return -ENODEV;
+
+ match = of_match_device(dev->driver->of_match_table, dev);
+ if (!match || !match->data)
+ return -EINVAL;
+
+ return syscfg_reset_controller_register(dev, match->data);
+}
diff --git a/drivers/reset/sti/reset-syscfg.h b/drivers/reset/sti/reset-syscfg.h
new file mode 100644
index 000000000000..2cc2283bac40
--- /dev/null
+++ b/drivers/reset/sti/reset-syscfg.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited
+ * Author: Stephen Gallimore <stephen.gallimore@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __STI_RESET_SYSCFG_H
+#define __STI_RESET_SYSCFG_H
+
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+/**
+ * Reset channel description for a system configuration register based
+ * reset controller.
+ *
+ * @compatible: Compatible string of the syscon regmap containing this
+ * channel's control and ack (status) bits.
+ * @reset: Regmap field description of the channel's reset bit.
+ * @ack: Regmap field description of the channel's acknowledge bit.
+ */
+struct syscfg_reset_channel_data {
+ const char *compatible;
+ struct reg_field reset;
+ struct reg_field ack;
+};
+
+#define _SYSCFG_RST_CH(_c, _rr, _rb, _ar, _ab) \
+ { .compatible = _c, \
+ .reset = REG_FIELD(_rr, _rb, _rb), \
+ .ack = REG_FIELD(_ar, _ab, _ab), }
+
+#define _SYSCFG_RST_CH_NO_ACK(_c, _rr, _rb) \
+ { .compatible = _c, \
+ .reset = REG_FIELD(_rr, _rb, _rb), }
+
+/**
+ * Description of a system configuration register based reset controller.
+ *
+ * @wait_for_ack: The controller will wait for reset assert and de-assert to
+ * be "ack'd" in a channel's ack field.
+ * @active_low: Are the resets in this controller active low, i.e. clearing
+ * the reset bit puts the hardware into reset.
+ * @nr_channels: The number of reset channels in this controller.
+ * @channels: An array of reset channel descriptions.
+ */
+struct syscfg_reset_controller_data {
+ bool wait_for_ack;
+ bool active_low;
+ int nr_channels;
+ const struct syscfg_reset_channel_data *channels;
+};
+
+/**
+ * syscfg_reset_probe(): platform device probe function used by syscfg
+ * reset controller drivers. This registers a reset
+ * controller configured by the OF match data for
+ * the compatible device which should be of type
+ * "struct syscfg_reset_controller_data".
+ *
+ * @pdev: platform device
+ */
+int syscfg_reset_probe(struct platform_device *pdev);
+
+#endif /* __STI_RESET_SYSCFG_H */
diff --git a/drivers/rtc/rtc-isl12057.c b/drivers/rtc/rtc-isl12057.c
index 7e5ead936a04..41bd76aaff76 100644
--- a/drivers/rtc/rtc-isl12057.c
+++ b/drivers/rtc/rtc-isl12057.c
@@ -274,10 +274,7 @@ static int isl12057_probe(struct i2c_client *client,
dev_set_drvdata(dev, data);
rtc = devm_rtc_device_register(dev, DRV_NAME, &rtc_ops, THIS_MODULE);
- if (IS_ERR(rtc))
- return PTR_ERR(rtc);
-
- return 0;
+ return PTR_ERR_OR_ZERO(rtc);
}
#ifdef CONFIG_OF
diff --git a/drivers/rtc/rtc-mv.c b/drivers/rtc/rtc-mv.c
index d536c5962c99..d15a999363fc 100644
--- a/drivers/rtc/rtc-mv.c
+++ b/drivers/rtc/rtc-mv.c
@@ -222,6 +222,7 @@ static int __init mv_rtc_probe(struct platform_device *pdev)
struct resource *res;
struct rtc_plat_data *pdata;
u32 rtc_time;
+ u32 rtc_date;
int ret = 0;
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
@@ -257,6 +258,17 @@ static int __init mv_rtc_probe(struct platform_device *pdev)
}
}
+ /*
+ * A date after January 19th, 2038 does not fit on 32 bits and
+ * will confuse the kernel and userspace. Reset to a sane date
+ * (January 1st, 2013) if we're after 2038.
+ */
+ rtc_date = readl(pdata->ioaddr + RTC_DATE_REG_OFFS);
+ if (bcd2bin((rtc_date >> RTC_YEAR_OFFS) & 0xff) >= 38) {
+ dev_info(&pdev->dev, "invalid RTC date, resetting to January 1st, 2013\n");
+ writel(0x130101, pdata->ioaddr + RTC_DATE_REG_OFFS);
+ }
+
pdata->irq = platform_get_irq(pdev, 0);
platform_set_drvdata(pdev, pdata);
diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c
index 1ebe67cd1833..7442bc130055 100644
--- a/drivers/sh/clk/cpg.c
+++ b/drivers/sh/clk/cpg.c
@@ -36,9 +36,47 @@ static void sh_clk_write(int value, struct clk *clk)
iowrite32(value, clk->mapped_reg);
}
+static unsigned int r8(const void __iomem *addr)
+{
+ return ioread8(addr);
+}
+
+static unsigned int r16(const void __iomem *addr)
+{
+ return ioread16(addr);
+}
+
+static unsigned int r32(const void __iomem *addr)
+{
+ return ioread32(addr);
+}
+
static int sh_clk_mstp_enable(struct clk *clk)
{
sh_clk_write(sh_clk_read(clk) & ~(1 << clk->enable_bit), clk);
+ if (clk->status_reg) {
+ unsigned int (*read)(const void __iomem *addr);
+ int i;
+ void __iomem *mapped_status = (phys_addr_t)clk->status_reg -
+ (phys_addr_t)clk->enable_reg + clk->mapped_reg;
+
+ if (clk->flags & CLK_ENABLE_REG_8BIT)
+ read = r8;
+ else if (clk->flags & CLK_ENABLE_REG_16BIT)
+ read = r16;
+ else
+ read = r32;
+
+ for (i = 1000;
+ (read(mapped_status) & (1 << clk->enable_bit)) && i;
+ i--)
+ cpu_relax();
+ if (!i) {
+ pr_err("cpg: failed to enable %p[%d]\n",
+ clk->enable_reg, clk->enable_bit);
+ return -ETIMEDOUT;
+ }
+ }
return 0;
}
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 5f88d767671e..2d51912a6e40 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -143,7 +143,7 @@ config RCAR_THERMAL
config KIRKWOOD_THERMAL
tristate "Temperature sensor on Marvell Kirkwood SoCs"
- depends on ARCH_KIRKWOOD
+ depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
depends on OF
help
Support for the Kirkwood thermal sensor driver into the Linux thermal
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 2577d67bacb2..2e6d8ddc4425 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1024,7 +1024,7 @@ config SERIAL_SGI_IOC3
config SERIAL_MSM
bool "MSM on-chip serial port support"
- depends on ARCH_MSM
+ depends on ARCH_MSM || ARCH_QCOM
select SERIAL_CORE
config SERIAL_MSM_CONSOLE
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 0c6048d5c9a3..74ec8fc5cc03 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -301,7 +301,7 @@ config DAVINCI_WATCHDOG
config ORION_WATCHDOG
tristate "Orion watchdog"
- depends on ARCH_ORION5X || ARCH_KIRKWOOD || ARCH_DOVE || MACH_DOVE
+ depends on ARCH_ORION5X || ARCH_KIRKWOOD || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU
select WATCHDOG_CORE
help
Say Y here if to include support for the watchdog timer
diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index 498163497c1c..9b3c41d18703 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -18,101 +18,204 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/watchdog.h>
+#include <linux/interrupt.h>
#include <linux/io.h>
-#include <linux/spinlock.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/of.h>
-#include <mach/bridge-regs.h>
+#include <linux/of_device.h>
+
+/* RSTOUT mask register physical address for Orion5x, Kirkwood and Dove */
+#define ORION_RSTOUT_MASK_OFFSET 0x20108
+
+/* Internal registers can be configured at any 1 MiB aligned address */
+#define INTERNAL_REGS_MASK ~(SZ_1M - 1)
/*
* Watchdog timer block registers.
*/
#define TIMER_CTRL 0x0000
-#define WDT_EN 0x0010
-#define WDT_VAL 0x0024
+#define TIMER_A370_STATUS 0x04
#define WDT_MAX_CYCLE_COUNT 0xffffffff
-#define WDT_IN_USE 0
-#define WDT_OK_TO_CLOSE 1
-#define WDT_RESET_OUT_EN BIT(1)
-#define WDT_INT_REQ BIT(3)
+#define WDT_A370_RATIO_MASK(v) ((v) << 16)
+#define WDT_A370_RATIO_SHIFT 5
+#define WDT_A370_RATIO (1 << WDT_A370_RATIO_SHIFT)
+
+#define WDT_AXP_FIXED_ENABLE_BIT BIT(10)
+#define WDT_A370_EXPIRED BIT(31)
static bool nowayout = WATCHDOG_NOWAYOUT;
static int heartbeat = -1; /* module parameter (seconds) */
-static unsigned int wdt_max_duration; /* (seconds) */
-static struct clk *clk;
-static unsigned int wdt_tclk;
-static void __iomem *wdt_reg;
-static DEFINE_SPINLOCK(wdt_lock);
-static int orion_wdt_ping(struct watchdog_device *wdt_dev)
+struct orion_watchdog;
+
+struct orion_watchdog_data {
+ int wdt_counter_offset;
+ int wdt_enable_bit;
+ int rstout_enable_bit;
+ int (*clock_init)(struct platform_device *,
+ struct orion_watchdog *);
+ int (*start)(struct watchdog_device *);
+};
+
+struct orion_watchdog {
+ struct watchdog_device wdt;
+ void __iomem *reg;
+ void __iomem *rstout;
+ unsigned long clk_rate;
+ struct clk *clk;
+ const struct orion_watchdog_data *data;
+};
+
+static int orion_wdt_clock_init(struct platform_device *pdev,
+ struct orion_watchdog *dev)
{
- spin_lock(&wdt_lock);
+ int ret;
- /* Reload watchdog duration */
- writel(wdt_tclk * wdt_dev->timeout, wdt_reg + WDT_VAL);
+ dev->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(dev->clk))
+ return PTR_ERR(dev->clk);
+ ret = clk_prepare_enable(dev->clk);
+ if (ret) {
+ clk_put(dev->clk);
+ return ret;
+ }
- spin_unlock(&wdt_lock);
+ dev->clk_rate = clk_get_rate(dev->clk);
return 0;
}
-static int orion_wdt_start(struct watchdog_device *wdt_dev)
+static int armada370_wdt_clock_init(struct platform_device *pdev,
+ struct orion_watchdog *dev)
{
- u32 reg;
+ int ret;
- spin_lock(&wdt_lock);
+ dev->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(dev->clk))
+ return PTR_ERR(dev->clk);
+ ret = clk_prepare_enable(dev->clk);
+ if (ret) {
+ clk_put(dev->clk);
+ return ret;
+ }
+
+ /* Setup watchdog input clock */
+ atomic_io_modify(dev->reg + TIMER_CTRL,
+ WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT),
+ WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT));
+
+ dev->clk_rate = clk_get_rate(dev->clk) / WDT_A370_RATIO;
+ return 0;
+}
+
+static int armadaxp_wdt_clock_init(struct platform_device *pdev,
+ struct orion_watchdog *dev)
+{
+ int ret;
+
+ dev->clk = of_clk_get_by_name(pdev->dev.of_node, "fixed");
+ if (IS_ERR(dev->clk))
+ return PTR_ERR(dev->clk);
+ ret = clk_prepare_enable(dev->clk);
+ if (ret) {
+ clk_put(dev->clk);
+ return ret;
+ }
+
+ /* Enable the fixed watchdog clock input */
+ atomic_io_modify(dev->reg + TIMER_CTRL,
+ WDT_AXP_FIXED_ENABLE_BIT,
+ WDT_AXP_FIXED_ENABLE_BIT);
+
+ dev->clk_rate = clk_get_rate(dev->clk);
+ return 0;
+}
+
+static int orion_wdt_ping(struct watchdog_device *wdt_dev)
+{
+ struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
+ /* Reload watchdog duration */
+ writel(dev->clk_rate * wdt_dev->timeout,
+ dev->reg + dev->data->wdt_counter_offset);
+ return 0;
+}
+
+static int armada370_start(struct watchdog_device *wdt_dev)
+{
+ struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
/* Set watchdog duration */
- writel(wdt_tclk * wdt_dev->timeout, wdt_reg + WDT_VAL);
+ writel(dev->clk_rate * wdt_dev->timeout,
+ dev->reg + dev->data->wdt_counter_offset);
- /* Clear watchdog timer interrupt */
- writel(~WDT_INT_REQ, BRIDGE_CAUSE);
+ /* Clear the watchdog expiration bit */
+ atomic_io_modify(dev->reg + TIMER_A370_STATUS, WDT_A370_EXPIRED, 0);
/* Enable watchdog timer */
- reg = readl(wdt_reg + TIMER_CTRL);
- reg |= WDT_EN;
- writel(reg, wdt_reg + TIMER_CTRL);
+ atomic_io_modify(dev->reg + TIMER_CTRL, dev->data->wdt_enable_bit,
+ dev->data->wdt_enable_bit);
+
+ atomic_io_modify(dev->rstout, dev->data->rstout_enable_bit,
+ dev->data->rstout_enable_bit);
+ return 0;
+}
+
+static int orion_start(struct watchdog_device *wdt_dev)
+{
+ struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
+
+ /* Set watchdog duration */
+ writel(dev->clk_rate * wdt_dev->timeout,
+ dev->reg + dev->data->wdt_counter_offset);
+
+ /* Enable watchdog timer */
+ atomic_io_modify(dev->reg + TIMER_CTRL, dev->data->wdt_enable_bit,
+ dev->data->wdt_enable_bit);
/* Enable reset on watchdog */
- reg = readl(RSTOUTn_MASK);
- reg |= WDT_RESET_OUT_EN;
- writel(reg, RSTOUTn_MASK);
+ atomic_io_modify(dev->rstout, dev->data->rstout_enable_bit,
+ dev->data->rstout_enable_bit);
- spin_unlock(&wdt_lock);
return 0;
}
-static int orion_wdt_stop(struct watchdog_device *wdt_dev)
+static int orion_wdt_start(struct watchdog_device *wdt_dev)
{
- u32 reg;
+ struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
- spin_lock(&wdt_lock);
+ /* There are some per-SoC quirks to handle */
+ return dev->data->start(wdt_dev);
+}
+
+static int orion_wdt_stop(struct watchdog_device *wdt_dev)
+{
+ struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
/* Disable reset on watchdog */
- reg = readl(RSTOUTn_MASK);
- reg &= ~WDT_RESET_OUT_EN;
- writel(reg, RSTOUTn_MASK);
+ atomic_io_modify(dev->rstout, dev->data->rstout_enable_bit, 0);
/* Disable watchdog timer */
- reg = readl(wdt_reg + TIMER_CTRL);
- reg &= ~WDT_EN;
- writel(reg, wdt_reg + TIMER_CTRL);
+ atomic_io_modify(dev->reg + TIMER_CTRL, dev->data->wdt_enable_bit, 0);
- spin_unlock(&wdt_lock);
return 0;
}
-static unsigned int orion_wdt_get_timeleft(struct watchdog_device *wdt_dev)
+static int orion_wdt_enabled(struct orion_watchdog *dev)
{
- unsigned int time_left;
+ bool enabled, running;
+
+ enabled = readl(dev->rstout) & dev->data->rstout_enable_bit;
+ running = readl(dev->reg + TIMER_CTRL) & dev->data->wdt_enable_bit;
- spin_lock(&wdt_lock);
- time_left = readl(wdt_reg + WDT_VAL) / wdt_tclk;
- spin_unlock(&wdt_lock);
+ return enabled && running;
+}
- return time_left;
+static unsigned int orion_wdt_get_timeleft(struct watchdog_device *wdt_dev)
+{
+ struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
+ return readl(dev->reg + dev->data->wdt_counter_offset) / dev->clk_rate;
}
static int orion_wdt_set_timeout(struct watchdog_device *wdt_dev,
@@ -136,68 +239,188 @@ static const struct watchdog_ops orion_wdt_ops = {
.get_timeleft = orion_wdt_get_timeleft,
};
-static struct watchdog_device orion_wdt = {
- .info = &orion_wdt_info,
- .ops = &orion_wdt_ops,
- .min_timeout = 1,
+static irqreturn_t orion_wdt_irq(int irq, void *devid)
+{
+ panic("Watchdog Timeout");
+ return IRQ_HANDLED;
+}
+
+/*
+ * The original devicetree binding for this driver specified only
+ * one memory resource, so in order to keep DT backwards compatibility
+ * we try to fallback to a hardcoded register address, if the resource
+ * is missing from the devicetree.
+ */
+static void __iomem *orion_wdt_ioremap_rstout(struct platform_device *pdev,
+ phys_addr_t internal_regs)
+{
+ struct resource *res;
+ phys_addr_t rstout;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (res)
+ return devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+
+ /* This workaround works only for "orion-wdt", DT-enabled */
+ if (!of_device_is_compatible(pdev->dev.of_node, "marvell,orion-wdt"))
+ return NULL;
+
+ rstout = internal_regs + ORION_RSTOUT_MASK_OFFSET;
+
+ WARN(1, FW_BUG "falling back to harcoded RSTOUT reg %pa\n", &rstout);
+ return devm_ioremap(&pdev->dev, rstout, 0x4);
+}
+
+static const struct orion_watchdog_data orion_data = {
+ .rstout_enable_bit = BIT(1),
+ .wdt_enable_bit = BIT(4),
+ .wdt_counter_offset = 0x24,
+ .clock_init = orion_wdt_clock_init,
+ .start = orion_start,
+};
+
+static const struct orion_watchdog_data armada370_data = {
+ .rstout_enable_bit = BIT(8),
+ .wdt_enable_bit = BIT(8),
+ .wdt_counter_offset = 0x34,
+ .clock_init = armada370_wdt_clock_init,
+ .start = armada370_start,
};
+static const struct orion_watchdog_data armadaxp_data = {
+ .rstout_enable_bit = BIT(8),
+ .wdt_enable_bit = BIT(8),
+ .wdt_counter_offset = 0x34,
+ .clock_init = armadaxp_wdt_clock_init,
+ .start = armada370_start,
+};
+
+static const struct of_device_id orion_wdt_of_match_table[] = {
+ {
+ .compatible = "marvell,orion-wdt",
+ .data = &orion_data,
+ },
+ {
+ .compatible = "marvell,armada-370-wdt",
+ .data = &armada370_data,
+ },
+ {
+ .compatible = "marvell,armada-xp-wdt",
+ .data = &armadaxp_data,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, orion_wdt_of_match_table);
+
static int orion_wdt_probe(struct platform_device *pdev)
{
+ struct orion_watchdog *dev;
+ const struct of_device_id *match;
+ unsigned int wdt_max_duration; /* (seconds) */
struct resource *res;
- int ret;
+ int ret, irq;
- clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "Orion Watchdog missing clock\n");
- return -ENODEV;
- }
- clk_prepare_enable(clk);
- wdt_tclk = clk_get_rate(clk);
+ dev = devm_kzalloc(&pdev->dev, sizeof(struct orion_watchdog),
+ GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ match = of_match_device(orion_wdt_of_match_table, &pdev->dev);
+ if (!match)
+ /* Default legacy match */
+ match = &orion_wdt_of_match_table[0];
+
+ dev->wdt.info = &orion_wdt_info;
+ dev->wdt.ops = &orion_wdt_ops;
+ dev->wdt.min_timeout = 1;
+ dev->data = match->data;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
- wdt_reg = devm_ioremap(&pdev->dev, res->start, resource_size(res));
- if (!wdt_reg)
- return -ENOMEM;
- wdt_max_duration = WDT_MAX_CYCLE_COUNT / wdt_tclk;
+ dev->reg = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+ if (!dev->reg)
+ return -ENOMEM;
- orion_wdt.timeout = wdt_max_duration;
- orion_wdt.max_timeout = wdt_max_duration;
- watchdog_init_timeout(&orion_wdt, heartbeat, &pdev->dev);
+ dev->rstout = orion_wdt_ioremap_rstout(pdev, res->start &
+ INTERNAL_REGS_MASK);
+ if (!dev->rstout)
+ return -ENODEV;
- watchdog_set_nowayout(&orion_wdt, nowayout);
- ret = watchdog_register_device(&orion_wdt);
+ ret = dev->data->clock_init(pdev, dev);
if (ret) {
- clk_disable_unprepare(clk);
+ dev_err(&pdev->dev, "cannot initialize clock\n");
return ret;
}
+ wdt_max_duration = WDT_MAX_CYCLE_COUNT / dev->clk_rate;
+
+ dev->wdt.timeout = wdt_max_duration;
+ dev->wdt.max_timeout = wdt_max_duration;
+ watchdog_init_timeout(&dev->wdt, heartbeat, &pdev->dev);
+
+ platform_set_drvdata(pdev, &dev->wdt);
+ watchdog_set_drvdata(&dev->wdt, dev);
+
+ /*
+ * Let's make sure the watchdog is fully stopped, unless it's
+ * explicitly enabled. This may be the case if the module was
+ * removed and re-insterted, or if the bootloader explicitly
+ * set a running watchdog before booting the kernel.
+ */
+ if (!orion_wdt_enabled(dev))
+ orion_wdt_stop(&dev->wdt);
+
+ /* Request the IRQ only after the watchdog is disabled */
+ irq = platform_get_irq(pdev, 0);
+ if (irq > 0) {
+ /*
+ * Not all supported platforms specify an interrupt for the
+ * watchdog, so let's make it optional.
+ */
+ ret = devm_request_irq(&pdev->dev, irq, orion_wdt_irq, 0,
+ pdev->name, dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to request IRQ\n");
+ goto disable_clk;
+ }
+ }
+
+ watchdog_set_nowayout(&dev->wdt, nowayout);
+ ret = watchdog_register_device(&dev->wdt);
+ if (ret)
+ goto disable_clk;
+
pr_info("Initial timeout %d sec%s\n",
- orion_wdt.timeout, nowayout ? ", nowayout" : "");
+ dev->wdt.timeout, nowayout ? ", nowayout" : "");
return 0;
+
+disable_clk:
+ clk_disable_unprepare(dev->clk);
+ clk_put(dev->clk);
+ return ret;
}
static int orion_wdt_remove(struct platform_device *pdev)
{
- watchdog_unregister_device(&orion_wdt);
- clk_disable_unprepare(clk);
+ struct watchdog_device *wdt_dev = platform_get_drvdata(pdev);
+ struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
+
+ watchdog_unregister_device(wdt_dev);
+ clk_disable_unprepare(dev->clk);
+ clk_put(dev->clk);
return 0;
}
static void orion_wdt_shutdown(struct platform_device *pdev)
{
- orion_wdt_stop(&orion_wdt);
+ struct watchdog_device *wdt_dev = platform_get_drvdata(pdev);
+ orion_wdt_stop(wdt_dev);
}
-static const struct of_device_id orion_wdt_of_match_table[] = {
- { .compatible = "marvell,orion-wdt", },
- {},
-};
-MODULE_DEVICE_TABLE(of, orion_wdt_of_match_table);
-
static struct platform_driver orion_wdt_driver = {
.probe = orion_wdt_probe,
.remove = orion_wdt_remove,
diff --git a/include/dt-bindings/clock/bcm281xx.h b/include/dt-bindings/clock/bcm281xx.h
new file mode 100644
index 000000000000..e0096940886d
--- /dev/null
+++ b/include/dt-bindings/clock/bcm281xx.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CLOCK_BCM281XX_H
+#define _CLOCK_BCM281XX_H
+
+/*
+ * This file defines the values used to specify clocks provided by
+ * the clock control units (CCUs) on Broadcom BCM281XX family SoCs.
+ */
+
+/* root CCU clock ids */
+
+#define BCM281XX_ROOT_CCU_FRAC_1M 0
+#define BCM281XX_ROOT_CCU_CLOCK_COUNT 1
+
+/* aon CCU clock ids */
+
+#define BCM281XX_AON_CCU_HUB_TIMER 0
+#define BCM281XX_AON_CCU_PMU_BSC 1
+#define BCM281XX_AON_CCU_PMU_BSC_VAR 2
+#define BCM281XX_AON_CCU_CLOCK_COUNT 3
+
+/* hub CCU clock ids */
+
+#define BCM281XX_HUB_CCU_TMON_1M 0
+#define BCM281XX_HUB_CCU_CLOCK_COUNT 1
+
+/* master CCU clock ids */
+
+#define BCM281XX_MASTER_CCU_SDIO1 0
+#define BCM281XX_MASTER_CCU_SDIO2 1
+#define BCM281XX_MASTER_CCU_SDIO3 2
+#define BCM281XX_MASTER_CCU_SDIO4 3
+#define BCM281XX_MASTER_CCU_USB_IC 4
+#define BCM281XX_MASTER_CCU_HSIC2_48M 5
+#define BCM281XX_MASTER_CCU_HSIC2_12M 6
+#define BCM281XX_MASTER_CCU_CLOCK_COUNT 7
+
+/* slave CCU clock ids */
+
+#define BCM281XX_SLAVE_CCU_UARTB 0
+#define BCM281XX_SLAVE_CCU_UARTB2 1
+#define BCM281XX_SLAVE_CCU_UARTB3 2
+#define BCM281XX_SLAVE_CCU_UARTB4 3
+#define BCM281XX_SLAVE_CCU_SSP0 4
+#define BCM281XX_SLAVE_CCU_SSP2 5
+#define BCM281XX_SLAVE_CCU_BSC1 6
+#define BCM281XX_SLAVE_CCU_BSC2 7
+#define BCM281XX_SLAVE_CCU_BSC3 8
+#define BCM281XX_SLAVE_CCU_PWM 9
+#define BCM281XX_SLAVE_CCU_CLOCK_COUNT 10
+
+#endif /* _CLOCK_BCM281XX_H */
diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h
index 859e9be511d9..6548a5fbcf4a 100644
--- a/include/dt-bindings/clock/r8a7790-clock.h
+++ b/include/dt-bindings/clock/r8a7790-clock.h
@@ -46,8 +46,8 @@
#define R8A7790_CLK_MSIOF1 8
#define R8A7790_CLK_MSIOF3 15
#define R8A7790_CLK_SCIFB2 16
-#define R8A7790_CLK_SYS_DMAC0 18
-#define R8A7790_CLK_SYS_DMAC1 19
+#define R8A7790_CLK_SYS_DMAC1 18
+#define R8A7790_CLK_SYS_DMAC0 19
/* MSTP3 */
#define R8A7790_CLK_TPU0 4
diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h
index 0ceb389dba6c..7ed92d0560d5 100644
--- a/include/linux/irqchip/arm-gic.h
+++ b/include/linux/irqchip/arm-gic.h
@@ -93,6 +93,11 @@ int gic_get_cpu_id(unsigned int cpu);
void gic_migrate_target(unsigned int new_cpu_id);
unsigned long gic_get_sgir_physaddr(void);
+extern const struct irq_domain_ops *gic_routable_irq_domain_ops;
+static inline void __init register_routable_domain_ops
+ (const struct irq_domain_ops *ops)
+{
+ gic_routable_irq_domain_ops = ops;
+}
#endif /* __ASSEMBLY */
-
#endif
diff --git a/include/linux/irqchip/arm-vic.h b/include/linux/irqchip/arm-vic.h
index e3c82dc95756..ba46c794b4e5 100644
--- a/include/linux/irqchip/arm-vic.h
+++ b/include/linux/irqchip/arm-vic.h
@@ -29,8 +29,10 @@
struct device_node;
struct pt_regs;
-void __vic_init(void __iomem *base, int irq_start, u32 vic_sources,
- u32 resume_sources, struct device_node *node);
+void __vic_init(void __iomem *base, int parent_irq, int irq_start,
+ u32 vic_sources, u32 resume_sources, struct device_node *node);
void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
+int vic_init_cascaded(void __iomem *base, unsigned int parent_irq,
+ u32 vic_sources, u32 resume_sources);
#endif
diff --git a/include/linux/irqchip/irq-crossbar.h b/include/linux/irqchip/irq-crossbar.h
new file mode 100644
index 000000000000..e5537b81df8d
--- /dev/null
+++ b/include/linux/irqchip/irq-crossbar.h
@@ -0,0 +1,11 @@
+/*
+ * drivers/irqchip/irq-crossbar.h
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+int irqcrossbar_init(void);
diff --git a/include/linux/platform_data/clk-integrator.h b/include/linux/platform_data/clk-integrator.h
index 280edac9d0a5..addd48cac625 100644
--- a/include/linux/platform_data/clk-integrator.h
+++ b/include/linux/platform_data/clk-integrator.h
@@ -1,3 +1,2 @@
-void integrator_clk_init(bool is_cp);
void integrator_impd1_clk_init(void __iomem *base, unsigned int id);
void integrator_impd1_clk_exit(unsigned int id);
diff --git a/include/linux/platform_data/mtd-davinci-aemif.h b/include/linux/platform_data/mtd-davinci-aemif.h
index 05b293443097..97948ac2bb9b 100644
--- a/include/linux/platform_data/mtd-davinci-aemif.h
+++ b/include/linux/platform_data/mtd-davinci-aemif.h
@@ -10,6 +10,8 @@
#ifndef _MACH_DAVINCI_AEMIF_H
#define _MACH_DAVINCI_AEMIF_H
+#include <linux/platform_device.h>
+
#define NRCSR_OFFSET 0x00
#define AWCCR_OFFSET 0x04
#define A1CR_OFFSET 0x10
@@ -31,6 +33,5 @@ struct davinci_aemif_timing {
u8 ta;
};
-int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
- void __iomem *base, unsigned cs);
+int davinci_aemif_setup(struct platform_device *pdev);
#endif
diff --git a/include/linux/reset.h b/include/linux/reset.h
index 6082247feab1..c0eda5023d74 100644
--- a/include/linux/reset.h
+++ b/include/linux/reset.h
@@ -4,6 +4,8 @@
struct device;
struct reset_control;
+#ifdef CONFIG_RESET_CONTROLLER
+
int reset_control_reset(struct reset_control *rstc);
int reset_control_assert(struct reset_control *rstc);
int reset_control_deassert(struct reset_control *rstc);
@@ -12,6 +14,67 @@ struct reset_control *reset_control_get(struct device *dev, const char *id);
void reset_control_put(struct reset_control *rstc);
struct reset_control *devm_reset_control_get(struct device *dev, const char *id);
-int device_reset(struct device *dev);
+int __must_check device_reset(struct device *dev);
+
+static inline int device_reset_optional(struct device *dev)
+{
+ return device_reset(dev);
+}
+
+static inline struct reset_control *reset_control_get_optional(
+ struct device *dev, const char *id)
+{
+ return reset_control_get(dev, id);
+}
+
+static inline struct reset_control *devm_reset_control_get_optional(
+ struct device *dev, const char *id)
+{
+ return devm_reset_control_get(dev, id);
+}
+
+#else
+
+static inline int reset_control_reset(struct reset_control *rstc)
+{
+ WARN_ON(1);
+ return 0;
+}
+
+static inline int reset_control_assert(struct reset_control *rstc)
+{
+ WARN_ON(1);
+ return 0;
+}
+
+static inline int reset_control_deassert(struct reset_control *rstc)
+{
+ WARN_ON(1);
+ return 0;
+}
+
+static inline void reset_control_put(struct reset_control *rstc)
+{
+ WARN_ON(1);
+}
+
+static inline int device_reset_optional(struct device *dev)
+{
+ return -ENOSYS;
+}
+
+static inline struct reset_control *reset_control_get_optional(
+ struct device *dev, const char *id)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline struct reset_control *devm_reset_control_get_optional(
+ struct device *dev, const char *id)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+#endif /* CONFIG_RESET_CONTROLLER */
#endif
diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h
index 60c72395ec6b..1f208b2a1ed6 100644
--- a/include/linux/sh_clk.h
+++ b/include/linux/sh_clk.h
@@ -52,6 +52,7 @@ struct clk {
unsigned long flags;
void __iomem *enable_reg;
+ void __iomem *status_reg;
unsigned int enable_bit;
void __iomem *mapped_reg;
@@ -116,22 +117,26 @@ long clk_round_parent(struct clk *clk, unsigned long target,
unsigned long *best_freq, unsigned long *parent_freq,
unsigned int div_min, unsigned int div_max);
-#define SH_CLK_MSTP(_parent, _enable_reg, _enable_bit, _flags) \
+#define SH_CLK_MSTP(_parent, _enable_reg, _enable_bit, _status_reg, _flags) \
{ \
.parent = _parent, \
.enable_reg = (void __iomem *)_enable_reg, \
.enable_bit = _enable_bit, \
+ .status_reg = _status_reg, \
.flags = _flags, \
}
-#define SH_CLK_MSTP32(_p, _r, _b, _f) \
- SH_CLK_MSTP(_p, _r, _b, _f | CLK_ENABLE_REG_32BIT)
+#define SH_CLK_MSTP32(_p, _r, _b, _f) \
+ SH_CLK_MSTP(_p, _r, _b, 0, _f | CLK_ENABLE_REG_32BIT)
-#define SH_CLK_MSTP16(_p, _r, _b, _f) \
- SH_CLK_MSTP(_p, _r, _b, _f | CLK_ENABLE_REG_16BIT)
+#define SH_CLK_MSTP32_STS(_p, _r, _b, _s, _f) \
+ SH_CLK_MSTP(_p, _r, _b, _s, _f | CLK_ENABLE_REG_32BIT)
-#define SH_CLK_MSTP8(_p, _r, _b, _f) \
- SH_CLK_MSTP(_p, _r, _b, _f | CLK_ENABLE_REG_8BIT)
+#define SH_CLK_MSTP16(_p, _r, _b, _f) \
+ SH_CLK_MSTP(_p, _r, _b, 0, _f | CLK_ENABLE_REG_16BIT)
+
+#define SH_CLK_MSTP8(_p, _r, _b, _f) \
+ SH_CLK_MSTP(_p, _r, _b, 0, _f | CLK_ENABLE_REG_8BIT)
int sh_clk_mstp_register(struct clk *clks, int nr);
diff --git a/sound/soc/kirkwood/Kconfig b/sound/soc/kirkwood/Kconfig
index 49f8437665de..06f4e8aa93ae 100644
--- a/sound/soc/kirkwood/Kconfig
+++ b/sound/soc/kirkwood/Kconfig
@@ -1,6 +1,6 @@
config SND_KIRKWOOD_SOC
tristate "SoC Audio for the Marvell Kirkwood and Dove chips"
- depends on ARCH_KIRKWOOD || ARCH_DOVE || ARCH_MVEBU || COMPILE_TEST
+ depends on ARCH_KIRKWOOD || ARCH_DOVE || ARCH_MVEBU || MACH_KIRKWOOD || COMPILE_TEST
help
Say Y or M if you want to add support for codecs attached to
the Kirkwood I2S interface. You will also need to select the