summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/ata/ahci.c3
-rw-r--r--drivers/ata/ahci.h1
-rw-r--r--drivers/ata/ahci_platform.c3
-rw-r--r--drivers/ata/libahci.c158
-rw-r--r--drivers/ata/libata-core.c201
-rw-r--r--drivers/ata/libata-eh.c164
-rw-r--r--drivers/ata/libata-scsi.c11
-rw-r--r--drivers/ata/libata.h4
-rw-r--r--include/linux/libata.h17
9 files changed, 206 insertions, 356 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 68f7b4216501..328826381a2d 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1208,9 +1208,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
ata_port_pbar_desc(ap, AHCI_PCI_BAR,
0x100 + ap->port_no * 0x80, "port");
- /* set initial link pm policy */
- ap->lpm_policy = ATA_LPM_UNKNOWN;
-
/* set enclosure management message type */
if (ap->flags & ATA_FLAG_EM)
ap->em_message_type = hpriv->em_msg_type;
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 93867d3f8dd3..1a2aacfdebc5 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -201,7 +201,6 @@ enum {
AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */
AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */
AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
- AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 07556853c0d6..6fef1fa75c54 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -129,9 +129,6 @@ static int __init ahci_probe(struct platform_device *pdev)
ata_port_desc(ap, "mmio %pR", mem);
ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
- /* set initial link pm policy */
- ap->lpm_policy = ATA_LPM_UNKNOWN;
-
/* set enclosure management message type */
if (ap->flags & ATA_FLAG_EM)
ap->em_message_type = hpriv->em_msg_type;
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index ed7803f2b4f1..437f92597788 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -56,8 +56,8 @@ MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)
module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");
-static int ahci_enable_alpm(struct ata_port *ap, enum ata_lpm_policy policy);
-static void ahci_disable_alpm(struct ata_port *ap);
+static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
+ unsigned hints);
static ssize_t ahci_led_show(struct ata_port *ap, char *buf);
static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
size_t size);
@@ -163,8 +163,7 @@ struct ata_port_operations ahci_ops = {
.pmp_attach = ahci_pmp_attach,
.pmp_detach = ahci_pmp_detach,
- .enable_pm = ahci_enable_alpm,
- .disable_pm = ahci_disable_alpm,
+ .set_lpm = ahci_set_lpm,
.em_show = ahci_led_show,
.em_store = ahci_led_store,
.sw_activity_show = ahci_activity_show,
@@ -641,126 +640,56 @@ static void ahci_power_up(struct ata_port *ap)
writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
}
-static void ahci_disable_alpm(struct ata_port *ap)
+static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
+ unsigned int hints)
{
+ struct ata_port *ap = link->ap;
struct ahci_host_priv *hpriv = ap->host->private_data;
- void __iomem *port_mmio = ahci_port_base(ap);
- u32 cmd;
struct ahci_port_priv *pp = ap->private_data;
-
- /* LPM bits should be disabled by libata-core */
- /* get the existing command bits */
- cmd = readl(port_mmio + PORT_CMD);
-
- /* disable ALPM and ASP */
- cmd &= ~PORT_CMD_ASP;
- cmd &= ~PORT_CMD_ALPE;
-
- /* force the interface back to active */
- cmd |= PORT_CMD_ICC_ACTIVE;
-
- /* write out new cmd value */
- writel(cmd, port_mmio + PORT_CMD);
- cmd = readl(port_mmio + PORT_CMD);
-
- /* wait 10ms to be sure we've come out of any low power state */
- msleep(10);
-
- /* clear out any PhyRdy stuff from interrupt status */
- writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT);
-
- /* go ahead and clean out PhyRdy Change from Serror too */
- ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
-
- /*
- * Clear flag to indicate that we should ignore all PhyRdy
- * state changes
- */
- hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG;
-
- /*
- * Enable interrupts on Phy Ready.
- */
- pp->intr_mask |= PORT_IRQ_PHYRDY;
- writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
-
- /*
- * don't change the link pm policy - we can be called
- * just to turn of link pm temporarily
- */
-}
-
-static int ahci_enable_alpm(struct ata_port *ap, enum ata_lpm_policy policy)
-{
- struct ahci_host_priv *hpriv = ap->host->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
- u32 cmd;
- struct ahci_port_priv *pp = ap->private_data;
- u32 asp;
-
- /* Make sure the host is capable of link power management */
- if (!(hpriv->cap & HOST_CAP_ALPM))
- return -EINVAL;
- switch (policy) {
- case ATA_LPM_MAX_POWER:
- case ATA_LPM_UNKNOWN:
+ if (policy != ATA_LPM_MAX_POWER) {
/*
- * if we came here with ATA_LPM_UNKNOWN,
- * it just means this is the first time we
- * have tried to enable - default to max performance,
- * and let the user go to lower power modes on request.
+ * Disable interrupts on Phy Ready. This keeps us from
+ * getting woken up due to spurious phy ready
+ * interrupts.
*/
- ahci_disable_alpm(ap);
- return 0;
- case ATA_LPM_MIN_POWER:
- /* configure HBA to enter SLUMBER */
- asp = PORT_CMD_ASP;
- break;
- case ATA_LPM_MED_POWER:
- /* configure HBA to enter PARTIAL */
- asp = 0;
- break;
- default:
- return -EINVAL;
+ pp->intr_mask &= ~PORT_IRQ_PHYRDY;
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+
+ sata_link_scr_lpm(link, policy, false);
}
- /*
- * Disable interrupts on Phy Ready. This keeps us from
- * getting woken up due to spurious phy ready interrupts
- * TBD - Hot plug should be done via polling now, is
- * that even supported?
- */
- pp->intr_mask &= ~PORT_IRQ_PHYRDY;
- writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+ if (hpriv->cap & HOST_CAP_ALPM) {
+ u32 cmd = readl(port_mmio + PORT_CMD);
- /*
- * Set a flag to indicate that we should ignore all PhyRdy
- * state changes since these can happen now whenever we
- * change link state
- */
- hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG;
+ if (policy == ATA_LPM_MAX_POWER || !(hints & ATA_LPM_HIPM)) {
+ cmd &= ~(PORT_CMD_ASP | PORT_CMD_ALPE);
+ cmd |= PORT_CMD_ICC_ACTIVE;
- /* get the existing command bits */
- cmd = readl(port_mmio + PORT_CMD);
+ writel(cmd, port_mmio + PORT_CMD);
+ readl(port_mmio + PORT_CMD);
- /*
- * Set ASP based on Policy
- */
- cmd |= asp;
+ /* wait 10ms to be sure we've come out of LPM state */
+ msleep(10);
+ } else {
+ cmd |= PORT_CMD_ALPE;
+ if (policy == ATA_LPM_MIN_POWER)
+ cmd |= PORT_CMD_ASP;
- /*
- * Setting this bit will instruct the HBA to aggressively
- * enter a lower power link state when it's appropriate and
- * based on the value set above for ASP
- */
- cmd |= PORT_CMD_ALPE;
+ /* write out new cmd value */
+ writel(cmd, port_mmio + PORT_CMD);
+ }
+ }
- /* write out new cmd value */
- writel(cmd, port_mmio + PORT_CMD);
- cmd = readl(port_mmio + PORT_CMD);
+ if (policy == ATA_LPM_MAX_POWER) {
+ sata_link_scr_lpm(link, policy, false);
+
+ /* turn PHYRDY IRQ back on */
+ pp->intr_mask |= PORT_IRQ_PHYRDY;
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+ }
- /* LPM bits should be set by libata-core */
return 0;
}
@@ -1658,15 +1587,10 @@ static void ahci_port_intr(struct ata_port *ap)
if (unlikely(resetting))
status &= ~PORT_IRQ_BAD_PMP;
- /* If we are getting PhyRdy, this is
- * just a power state change, we should
- * clear out this, plus the PhyRdy/Comm
- * Wake bits from Serror
- */
- if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) &&
- (status & PORT_IRQ_PHYRDY)) {
+ /* if LPM is enabled, PHYRDY doesn't mean anything */
+ if (ap->link.lpm_policy > ATA_LPM_MAX_POWER) {
status &= ~PORT_IRQ_PHYRDY;
- ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
+ ahci_scr_write(&ap->link, SCR_ERROR, SERR_PHYRDY_CHG);
}
if (unlikely(status & PORT_IRQ_ERROR)) {
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index b8024451234c..7c5538b9fa3b 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1028,182 +1028,6 @@ const char *sata_spd_string(unsigned int spd)
return spd_str[spd - 1];
}
-static int ata_dev_set_dipm(struct ata_device *dev, enum ata_lpm_policy policy)
-{
- struct ata_link *link = dev->link;
- struct ata_port *ap = link->ap;
- u32 scontrol;
- unsigned int err_mask;
- int rc;
-
- /*
- * disallow DIPM for drivers which haven't set
- * ATA_FLAG_LPM. This is because when DIPM is enabled,
- * phy ready will be set in the interrupt status on
- * state changes, which will cause some drivers to
- * think there are errors - additionally drivers will
- * need to disable hot plug.
- */
- if (!(ap->flags & ATA_FLAG_LPM) || !ata_dev_enabled(dev)) {
- ap->lpm_policy = ATA_LPM_UNKNOWN;
- return -EINVAL;
- }
-
- /*
- * For DIPM, we will only enable it for the
- * min_power setting.
- *
- * Why? Because Disks are too stupid to know that
- * If the host rejects a request to go to SLUMBER
- * they should retry at PARTIAL, and instead it
- * just would give up. So, for medium_power to
- * work at all, we need to only allow HIPM.
- */
- rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
- if (rc)
- return rc;
-
- switch (policy) {
- case ATA_LPM_MIN_POWER:
- /* no restrictions on LPM transitions */
- scontrol &= ~(0x3 << 8);
- rc = sata_scr_write(link, SCR_CONTROL, scontrol);
- if (rc)
- return rc;
-
- /* enable DIPM */
- if (dev->flags & ATA_DFLAG_DIPM)
- err_mask = ata_dev_set_feature(dev,
- SETFEATURES_SATA_ENABLE, SATA_DIPM);
- break;
- case ATA_LPM_MED_POWER:
- /* allow LPM to PARTIAL */
- scontrol &= ~(0x1 << 8);
- scontrol |= (0x2 << 8);
- rc = sata_scr_write(link, SCR_CONTROL, scontrol);
- if (rc)
- return rc;
-
- /*
- * we don't have to disable DIPM since LPM flags
- * disallow transitions to SLUMBER, which effectively
- * disable DIPM if it does not support PARTIAL
- */
- break;
- case ATA_LPM_UNKNOWN:
- case ATA_LPM_MAX_POWER:
- /* disable all LPM transitions */
- scontrol |= (0x3 << 8);
- rc = sata_scr_write(link, SCR_CONTROL, scontrol);
- if (rc)
- return rc;
-
- /*
- * we don't have to disable DIPM since LPM flags
- * disallow all transitions which effectively
- * disable DIPM anyway.
- */
- break;
- }
-
- /* FIXME: handle SET FEATURES failure */
- (void) err_mask;
-
- return 0;
-}
-
-/**
- * ata_dev_enable_pm - enable SATA interface power management
- * @dev: device to enable power management
- * @policy: the link power management policy
- *
- * Enable SATA Interface power management. This will enable
- * Device Interface Power Management (DIPM) for min_power
- * policy, and then call driver specific callbacks for
- * enabling Host Initiated Power management.
- *
- * Locking: Caller.
- * Returns: -EINVAL if LPM is not supported, 0 otherwise.
- */
-void ata_dev_enable_pm(struct ata_device *dev, enum ata_lpm_policy policy)
-{
- int rc = 0;
- struct ata_port *ap = dev->link->ap;
-
- /* set HIPM first, then DIPM */
- if (ap->ops->enable_pm)
- rc = ap->ops->enable_pm(ap, policy);
- if (rc)
- goto enable_pm_out;
- rc = ata_dev_set_dipm(dev, policy);
-
-enable_pm_out:
- if (rc)
- ap->lpm_policy = ATA_LPM_MAX_POWER;
- else
- ap->lpm_policy = policy;
- return /* rc */; /* hopefully we can use 'rc' eventually */
-}
-
-#ifdef CONFIG_PM
-/**
- * ata_dev_disable_pm - disable SATA interface power management
- * @dev: device to disable power management
- *
- * Disable SATA Interface power management. This will disable
- * Device Interface Power Management (DIPM) without changing
- * policy, call driver specific callbacks for disabling Host
- * Initiated Power management.
- *
- * Locking: Caller.
- * Returns: void
- */
-static void ata_dev_disable_pm(struct ata_device *dev)
-{
- struct ata_port *ap = dev->link->ap;
-
- ata_dev_set_dipm(dev, ATA_LPM_MAX_POWER);
- if (ap->ops->disable_pm)
- ap->ops->disable_pm(ap);
-}
-#endif /* CONFIG_PM */
-
-void ata_lpm_schedule(struct ata_port *ap, enum ata_lpm_policy policy)
-{
- ap->lpm_policy = policy;
- ap->link.eh_info.action |= ATA_EH_LPM;
- ap->link.eh_info.flags |= ATA_EHI_NO_AUTOPSY;
- ata_port_schedule_eh(ap);
-}
-
-#ifdef CONFIG_PM
-static void ata_lpm_enable(struct ata_host *host)
-{
- struct ata_link *link;
- struct ata_port *ap;
- struct ata_device *dev;
- int i;
-
- for (i = 0; i < host->n_ports; i++) {
- ap = host->ports[i];
- ata_for_each_link(link, ap, EDGE) {
- ata_for_each_dev(dev, link, ALL)
- ata_dev_disable_pm(dev);
- }
- }
-}
-
-static void ata_lpm_disable(struct ata_host *host)
-{
- int i;
-
- for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap = host->ports[i];
- ata_lpm_schedule(ap, ap->lpm_policy);
- }
-}
-#endif /* CONFIG_PM */
-
/**
* ata_dev_classify - determine device type based on ATA-spec signature
* @tf: ATA taskfile register set for device to be identified
@@ -2562,13 +2386,6 @@ int ata_dev_configure(struct ata_device *dev)
if (dev->flags & ATA_DFLAG_LBA48)
dev->max_sectors = ATA_MAX_SECTORS_LBA48;
- if (!(dev->horkage & ATA_HORKAGE_LPM)) {
- if (ata_id_has_hipm(dev->id))
- dev->flags |= ATA_DFLAG_HIPM;
- if (ata_id_has_dipm(dev->id))
- dev->flags |= ATA_DFLAG_DIPM;
- }
-
/* Limit PATA drive on SATA cable bridge transfers to udma5,
200 sectors */
if (ata_dev_knobble(dev)) {
@@ -2589,13 +2406,6 @@ int ata_dev_configure(struct ata_device *dev)
dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
dev->max_sectors);
- if (ata_dev_blacklisted(dev) & ATA_HORKAGE_LPM) {
- dev->horkage |= ATA_HORKAGE_LPM;
-
- /* reset link pm_policy for this port to no pm */
- ap->lpm_policy = ATA_LPM_MAX_POWER;
- }
-
if (ap->ops->dev_config)
ap->ops->dev_config(dev);
@@ -5495,12 +5305,6 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
int rc;
/*
- * disable link pm on all ports before requesting
- * any pm activity
- */
- ata_lpm_enable(host);
-
- /*
* On some hardware, device fails to respond after spun down
* for suspend. As the device won't be used before being
* resumed, we don't need to touch the device. Ask EH to skip
@@ -5533,9 +5337,6 @@ void ata_host_resume(struct ata_host *host)
ata_host_request_pm(host, PMSG_ON, ATA_EH_RESET,
ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0);
host->dev->power.power_state = PMSG_ON;
-
- /* reenable link pm */
- ata_lpm_disable(host);
}
#endif
@@ -6096,7 +5897,7 @@ static void async_port_probe(void *data, async_cookie_t cookie)
spin_lock_irqsave(ap->lock, flags);
ehi->probe_mask |= ATA_ALL_DEVICES;
- ehi->action |= ATA_EH_RESET | ATA_EH_LPM;
+ ehi->action |= ATA_EH_RESET;
ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
ap->pflags &= ~ATA_PFLAG_INITIALIZING;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 96aa75ddf87f..a645cd3ab163 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1580,9 +1580,9 @@ static void ata_eh_analyze_serror(struct ata_link *link)
* host links. For disabled PMP links, only N bit is
* considered as X bit is left at 1 for link plugging.
*/
- hotplug_mask = 0;
-
- if (!(link->flags & ATA_LFLAG_DISABLED) || ata_is_host_link(link))
+ if (link->lpm_policy != ATA_LPM_MAX_POWER)
+ hotplug_mask = 0; /* hotplug doesn't work w/ LPM */
+ else if (!(link->flags & ATA_LFLAG_DISABLED) || ata_is_host_link(link))
hotplug_mask = SERR_PHYRDY_CHG | SERR_DEV_XCHG;
else
hotplug_mask = SERR_PHYRDY_CHG;
@@ -2784,8 +2784,9 @@ int ata_eh_reset(struct ata_link *link, int classify,
ata_eh_done(link, NULL, ATA_EH_RESET);
if (slave)
ata_eh_done(slave, NULL, ATA_EH_RESET);
- ehc->last_reset = jiffies; /* update to completion time */
+ ehc->last_reset = jiffies; /* update to completion time */
ehc->i.action |= ATA_EH_REVALIDATE;
+ link->lpm_policy = ATA_LPM_UNKNOWN; /* reset LPM state */
rc = 0;
out:
@@ -3211,6 +3212,121 @@ static int ata_eh_maybe_retry_flush(struct ata_device *dev)
return rc;
}
+/**
+ * ata_eh_set_lpm - configure SATA interface power management
+ * @link: link to configure power management
+ * @policy: the link power management policy
+ * @r_failed_dev: out parameter for failed device
+ *
+ * Enable SATA Interface power management. This will enable
+ * Device Interface Power Management (DIPM) for min_power
+ * policy, and then call driver specific callbacks for
+ * enabling Host Initiated Power management.
+ *
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
+ struct ata_device **r_failed_dev)
+{
+ struct ata_port *ap = link->ap;
+ struct ata_eh_context *ehc = &link->eh_context;
+ struct ata_device *dev, *link_dev = NULL, *lpm_dev = NULL;
+ unsigned int hints = ATA_LPM_EMPTY | ATA_LPM_HIPM;
+ unsigned int err_mask;
+ int rc;
+
+ /* if the link or host doesn't do LPM, noop */
+ if ((link->flags & ATA_LFLAG_NO_LPM) || (ap && !ap->ops->set_lpm))
+ return 0;
+
+ /*
+ * DIPM is enabled only for MIN_POWER as some devices
+ * misbehave when the host NACKs transition to SLUMBER. Order
+ * device and link configurations such that the host always
+ * allows DIPM requests.
+ */
+ ata_for_each_dev(dev, link, ENABLED) {
+ bool hipm = ata_id_has_hipm(dev->id);
+ bool dipm = ata_id_has_dipm(dev->id);
+
+ /* find the first enabled and LPM enabled devices */
+ if (!link_dev)
+ link_dev = dev;
+
+ if (!lpm_dev && (hipm || dipm))
+ lpm_dev = dev;
+
+ hints &= ~ATA_LPM_EMPTY;
+ if (!hipm)
+ hints &= ~ATA_LPM_HIPM;
+
+ /* disable DIPM before changing link config */
+ if (policy != ATA_LPM_MIN_POWER && dipm) {
+ err_mask = ata_dev_set_feature(dev,
+ SETFEATURES_SATA_DISABLE, SATA_DIPM);
+ if (err_mask && err_mask != AC_ERR_DEV) {
+ ata_dev_printk(dev, KERN_WARNING,
+ "failed to disable DIPM, Emask 0x%x\n",
+ err_mask);
+ rc = -EIO;
+ goto fail;
+ }
+ }
+ }
+
+ rc = ap->ops->set_lpm(link, policy, hints);
+ if (!rc && ap->slave_link)
+ rc = ap->ops->set_lpm(ap->slave_link, policy, hints);
+
+ /*
+ * Attribute link config failure to the first (LPM) enabled
+ * device on the link.
+ */
+ if (rc) {
+ if (rc == -EOPNOTSUPP) {
+ link->flags |= ATA_LFLAG_NO_LPM;
+ return 0;
+ }
+ dev = lpm_dev ? lpm_dev : link_dev;
+ goto fail;
+ }
+
+ /* host config updated, enable DIPM if transitioning to MIN_POWER */
+ ata_for_each_dev(dev, link, ENABLED) {
+ if (policy == ATA_LPM_MIN_POWER && ata_id_has_dipm(dev->id)) {
+ err_mask = ata_dev_set_feature(dev,
+ SETFEATURES_SATA_ENABLE, SATA_DIPM);
+ if (err_mask && err_mask != AC_ERR_DEV) {
+ ata_dev_printk(dev, KERN_WARNING,
+ "failed to enable DIPM, Emask 0x%x\n",
+ err_mask);
+ rc = -EIO;
+ goto fail;
+ }
+ }
+ }
+
+ link->lpm_policy = policy;
+ if (ap && ap->slave_link)
+ ap->slave_link->lpm_policy = policy;
+ return 0;
+
+fail:
+ /* if no device or only one more chance is left, disable LPM */
+ if (!dev || ehc->tries[dev->devno] <= 2) {
+ ata_link_printk(link, KERN_WARNING,
+ "disabling LPM on the link\n");
+ link->flags |= ATA_LFLAG_NO_LPM;
+ }
+ if (r_failed_dev)
+ *r_failed_dev = dev;
+ return rc;
+}
+
static int ata_link_nr_enabled(struct ata_link *link)
{
struct ata_device *dev;
@@ -3295,6 +3411,10 @@ static int ata_eh_schedule_probe(struct ata_device *dev)
ehc->saved_xfer_mode[dev->devno] = 0;
ehc->saved_ncq_enabled &= ~(1 << dev->devno);
+ /* the link maybe in a deep sleep, wake it up */
+ if (link->lpm_policy > ATA_LPM_MAX_POWER)
+ link->ap->ops->set_lpm(link, ATA_LPM_MAX_POWER, ATA_LPM_EMPTY);
+
/* Record and count probe trials on the ering. The specific
* error mask used is irrelevant. Because a successful device
* detection clears the ering, this count accumulates only if
@@ -3396,8 +3516,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
{
struct ata_link *link;
struct ata_device *dev;
- int nr_failed_devs;
- int rc;
+ int rc, nr_fails;
unsigned long flags, deadline;
DPRINTK("ENTER\n");
@@ -3438,7 +3557,6 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
retry:
rc = 0;
- nr_failed_devs = 0;
/* if UNLOADING, finish immediately */
if (ap->pflags & ATA_PFLAG_UNLOADING)
@@ -3523,13 +3641,17 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
}
/* the rest */
- ata_for_each_link(link, ap, EDGE) {
+ nr_fails = 0;
+ ata_for_each_link(link, ap, PMP_FIRST) {
struct ata_eh_context *ehc = &link->eh_context;
+ if (sata_pmp_attached(ap) && ata_is_host_link(link))
+ goto config_lpm;
+
/* revalidate existing devices and attach new ones */
rc = ata_eh_revalidate_and_attach(link, &dev);
if (rc)
- goto dev_fail;
+ goto rest_fail;
/* if PMP got attached, return, pmp EH will take care of it */
if (link->device->class == ATA_DEV_PMP) {
@@ -3541,7 +3663,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
if (ehc->i.flags & ATA_EHI_SETMODE) {
rc = ata_set_mode(link, &dev);
if (rc)
- goto dev_fail;
+ goto rest_fail;
ehc->i.flags &= ~ATA_EHI_SETMODE;
}
@@ -3554,7 +3676,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
continue;
rc = atapi_eh_clear_ua(dev);
if (rc)
- goto dev_fail;
+ goto rest_fail;
}
}
@@ -3564,21 +3686,25 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
continue;
rc = ata_eh_maybe_retry_flush(dev);
if (rc)
- goto dev_fail;
+ goto rest_fail;
}
+ config_lpm:
/* configure link power saving */
- if (ehc->i.action & ATA_EH_LPM)
- ata_for_each_dev(dev, link, ALL)
- ata_dev_enable_pm(dev, ap->lpm_policy);
+ if (link->lpm_policy != ap->target_lpm_policy) {
+ rc = ata_eh_set_lpm(link, ap->target_lpm_policy, &dev);
+ if (rc)
+ goto rest_fail;
+ }
/* this link is okay now */
ehc->i.flags = 0;
continue;
-dev_fail:
- nr_failed_devs++;
- ata_eh_handle_dev_fail(dev, rc);
+ rest_fail:
+ nr_fails++;
+ if (dev)
+ ata_eh_handle_dev_fail(dev, rc);
if (ap->pflags & ATA_PFLAG_FROZEN) {
/* PMP reset requires working host port.
@@ -3590,7 +3716,7 @@ dev_fail:
}
}
- if (nr_failed_devs)
+ if (nr_fails)
goto retry;
out:
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index aa56681f68db..56f6224fd6e6 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -117,6 +117,7 @@ static ssize_t ata_scsi_lpm_store(struct device *dev,
struct Scsi_Host *shost = class_to_shost(dev);
struct ata_port *ap = ata_shost_to_port(shost);
enum ata_lpm_policy policy;
+ unsigned long flags;
/* UNKNOWN is internal state, iterate from MAX_POWER */
for (policy = ATA_LPM_MAX_POWER;
@@ -129,7 +130,11 @@ static ssize_t ata_scsi_lpm_store(struct device *dev,
if (policy == ARRAY_SIZE(ata_lpm_policy_names))
return -EINVAL;
- ata_lpm_schedule(ap, policy);
+ spin_lock_irqsave(ap->lock, flags);
+ ap->target_lpm_policy = policy;
+ ata_port_schedule_eh(ap);
+ spin_unlock_irqrestore(ap->lock, flags);
+
return count;
}
@@ -139,11 +144,11 @@ static ssize_t ata_scsi_lpm_show(struct device *dev,
struct Scsi_Host *shost = class_to_shost(dev);
struct ata_port *ap = ata_shost_to_port(shost);
- if (ap->lpm_policy >= ARRAY_SIZE(ata_lpm_policy_names))
+ if (ap->target_lpm_policy >= ARRAY_SIZE(ata_lpm_policy_names))
return -EINVAL;
return snprintf(buf, PAGE_SIZE, "%s\n",
- ata_lpm_policy_names[ap->lpm_policy]);
+ ata_lpm_policy_names[ap->target_lpm_policy]);
}
DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR,
ata_scsi_lpm_show, ata_scsi_lpm_store);
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 65b6a73c3ac7..55a6f413a550 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -102,10 +102,6 @@ extern int sata_link_init_spd(struct ata_link *link);
extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg);
extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
extern struct ata_port *ata_port_alloc(struct ata_host *host);
-extern void ata_dev_enable_pm(struct ata_device *dev,
- enum ata_lpm_policy policy);
-extern void ata_lpm_schedule(struct ata_port *ap,
- enum ata_lpm_policy policy);
extern const char *sata_spd_string(unsigned int spd);
/* libata-acpi.c */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 7770eeb21039..bc4ee218b185 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -172,6 +172,7 @@ enum {
ATA_LFLAG_NO_RETRY = (1 << 5), /* don't retry this link */
ATA_LFLAG_DISABLED = (1 << 6), /* link is disabled */
ATA_LFLAG_SW_ACTIVITY = (1 << 7), /* keep activity stats */
+ ATA_LFLAG_NO_LPM = (1 << 8), /* disable LPM on this link */
/* struct ata_port flags */
ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */
@@ -324,12 +325,11 @@ enum {
ATA_EH_HARDRESET = (1 << 2), /* meaningful only in ->prereset */
ATA_EH_RESET = ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
ATA_EH_ENABLE_LINK = (1 << 3),
- ATA_EH_LPM = (1 << 4), /* link power management action */
ATA_EH_PARK = (1 << 5), /* unload heads and stop I/O */
ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE | ATA_EH_PARK,
ATA_EH_ALL_ACTIONS = ATA_EH_REVALIDATE | ATA_EH_RESET |
- ATA_EH_ENABLE_LINK | ATA_EH_LPM,
+ ATA_EH_ENABLE_LINK,
/* ata_eh_info->flags */
ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */
@@ -377,7 +377,6 @@ enum {
ATA_HORKAGE_BROKEN_HPA = (1 << 4), /* Broken HPA */
ATA_HORKAGE_DISABLE = (1 << 5), /* Disable it */
ATA_HORKAGE_HPA_SIZE = (1 << 6), /* native size off by one */
- ATA_HORKAGE_LPM = (1 << 7), /* Link PM problems */
ATA_HORKAGE_IVB = (1 << 8), /* cbl det validity bit bugs */
ATA_HORKAGE_STUCK_ERR = (1 << 9), /* stuck ERR on next PACKET */
ATA_HORKAGE_BRIDGE_OK = (1 << 10), /* no bridge limits */
@@ -475,6 +474,11 @@ enum ata_lpm_policy {
ATA_LPM_MIN_POWER,
};
+enum ata_lpm_hints {
+ ATA_LPM_EMPTY = (1 << 0), /* port empty/probing */
+ ATA_LPM_HIPM = (1 << 1), /* may use HIPM */
+};
+
/* forward declarations */
struct scsi_device;
struct ata_port_operations;
@@ -702,6 +706,7 @@ struct ata_link {
unsigned int hw_sata_spd_limit;
unsigned int sata_spd_limit;
unsigned int sata_spd; /* current SATA PHY speed */
+ enum ata_lpm_policy lpm_policy;
/* record runtime error info, protected by host_set lock */
struct ata_eh_info eh_info;
@@ -773,7 +778,7 @@ struct ata_port {
pm_message_t pm_mesg;
int *pm_result;
- enum ata_lpm_policy lpm_policy;
+ enum ata_lpm_policy target_lpm_policy;
struct timer_list fastdrain_timer;
unsigned long fastdrain_cnt;
@@ -839,8 +844,8 @@ struct ata_port_operations {
int (*scr_write)(struct ata_link *link, unsigned int sc_reg, u32 val);
void (*pmp_attach)(struct ata_port *ap);
void (*pmp_detach)(struct ata_port *ap);
- int (*enable_pm)(struct ata_port *ap, enum ata_lpm_policy policy);
- void (*disable_pm)(struct ata_port *ap);
+ int (*set_lpm)(struct ata_link *link, enum ata_lpm_policy policy,
+ unsigned hints);
/*
* Start, stop, suspend and resume