diff options
| -rw-r--r-- | MAINTAINERS | 1 | ||||
| -rw-r--r-- | drivers/staging/iio/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/staging/iio/Makefile | 1 | ||||
| -rw-r--r-- | drivers/staging/iio/trigger/Kconfig | 19 | ||||
| -rw-r--r-- | drivers/staging/iio/trigger/Makefile | 5 | ||||
| -rw-r--r-- | drivers/staging/iio/trigger/iio-trig-bfin-timer.c | 292 | ||||
| -rw-r--r-- | drivers/staging/iio/trigger/iio-trig-bfin-timer.h | 25 |
7 files changed, 0 insertions, 344 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index c06fcd0e1514..48486a505a4e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -866,7 +866,6 @@ F: drivers/iio/*/ad* F: drivers/iio/adc/ltc2497* X: drivers/iio/*/adjd* F: drivers/staging/iio/*/ad* -F: drivers/staging/iio/trigger/iio-trig-bfin-timer.c ANDROID CONFIG FRAGMENTS M: Rob Herring <robh@kernel.org> diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig index 8abc1ab3c0c7..bd9445956511 100644 --- a/drivers/staging/iio/Kconfig +++ b/drivers/staging/iio/Kconfig @@ -14,6 +14,5 @@ source "drivers/staging/iio/impedance-analyzer/Kconfig" source "drivers/staging/iio/light/Kconfig" source "drivers/staging/iio/meter/Kconfig" source "drivers/staging/iio/resolver/Kconfig" -source "drivers/staging/iio/trigger/Kconfig" endmenu diff --git a/drivers/staging/iio/Makefile b/drivers/staging/iio/Makefile index 455bffc29649..e99a375c07b9 100644 --- a/drivers/staging/iio/Makefile +++ b/drivers/staging/iio/Makefile @@ -13,4 +13,3 @@ obj-y += impedance-analyzer/ obj-y += light/ obj-y += meter/ obj-y += resolver/ -obj-y += trigger/ diff --git a/drivers/staging/iio/trigger/Kconfig b/drivers/staging/iio/trigger/Kconfig deleted file mode 100644 index 0b01d24cea51..000000000000 --- a/drivers/staging/iio/trigger/Kconfig +++ /dev/null @@ -1,19 +0,0 @@ - # -# Industrial I/O standalone triggers -# -comment "Triggers - standalone" - -if IIO_TRIGGER - -config IIO_BFIN_TMR_TRIGGER - tristate "Blackfin TIMER trigger" - depends on BLACKFIN - select BFIN_GPTIMERS - help - Provides support for using a Blackfin timer as IIO triggers. - If unsure, say N (but it's safe to say "Y"). - - To compile this driver as a module, choose M here: the - module will be called iio-trig-bfin-timer. - -endif # IIO_TRIGGER diff --git a/drivers/staging/iio/trigger/Makefile b/drivers/staging/iio/trigger/Makefile deleted file mode 100644 index 1300a21363db..000000000000 --- a/drivers/staging/iio/trigger/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for triggers not associated with iio-devices -# - -obj-$(CONFIG_IIO_BFIN_TMR_TRIGGER) += iio-trig-bfin-timer.o diff --git a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c deleted file mode 100644 index 71f11d7472c0..000000000000 --- a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c +++ /dev/null @@ -1,292 +0,0 @@ -/* - * Copyright 2011 Analog Devices Inc. - * - * Licensed under the GPL-2. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/delay.h> - -#include <asm/gptimers.h> -#include <asm/portmux.h> - -#include <linux/iio/iio.h> -#include <linux/iio/trigger.h> - -#include "iio-trig-bfin-timer.h" - -struct bfin_timer { - unsigned short id, bit; - unsigned long irqbit; - int irq; - int pin; -}; - -/* - * this covers all hardware timer configurations on - * all Blackfin derivatives out there today - */ - -static struct bfin_timer iio_bfin_timer_code[MAX_BLACKFIN_GPTIMERS] = { - {TIMER0_id, TIMER0bit, TIMER_STATUS_TIMIL0, IRQ_TIMER0, P_TMR0}, - {TIMER1_id, TIMER1bit, TIMER_STATUS_TIMIL1, IRQ_TIMER1, P_TMR1}, - {TIMER2_id, TIMER2bit, TIMER_STATUS_TIMIL2, IRQ_TIMER2, P_TMR2}, -#if (MAX_BLACKFIN_GPTIMERS > 3) - {TIMER3_id, TIMER3bit, TIMER_STATUS_TIMIL3, IRQ_TIMER3, P_TMR3}, - {TIMER4_id, TIMER4bit, TIMER_STATUS_TIMIL4, IRQ_TIMER4, P_TMR4}, - {TIMER5_id, TIMER5bit, TIMER_STATUS_TIMIL5, IRQ_TIMER5, P_TMR5}, - {TIMER6_id, TIMER6bit, TIMER_STATUS_TIMIL6, IRQ_TIMER6, P_TMR6}, - {TIMER7_id, TIMER7bit, TIMER_STATUS_TIMIL7, IRQ_TIMER7, P_TMR7}, -#endif -#if (MAX_BLACKFIN_GPTIMERS > 8) - {TIMER8_id, TIMER8bit, TIMER_STATUS_TIMIL8, IRQ_TIMER8, P_TMR8}, - {TIMER9_id, TIMER9bit, TIMER_STATUS_TIMIL9, IRQ_TIMER9, P_TMR9}, - {TIMER10_id, TIMER10bit, TIMER_STATUS_TIMIL10, IRQ_TIMER10, P_TMR10}, -#if (MAX_BLACKFIN_GPTIMERS > 11) - {TIMER11_id, TIMER11bit, TIMER_STATUS_TIMIL11, IRQ_TIMER11, P_TMR11}, -#endif -#endif -}; - -struct bfin_tmr_state { - struct iio_trigger *trig; - struct bfin_timer *t; - unsigned int timer_num; - bool output_enable; - unsigned int duty; - int irq; -}; - -static int iio_bfin_tmr_set_state(struct iio_trigger *trig, bool state) -{ - struct bfin_tmr_state *st = iio_trigger_get_drvdata(trig); - - if (get_gptimer_period(st->t->id) == 0) - return -EINVAL; - - if (state) - enable_gptimers(st->t->bit); - else - disable_gptimers(st->t->bit); - - return 0; -} - -static ssize_t frequency_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iio_trigger *trig = to_iio_trigger(dev); - struct bfin_tmr_state *st = iio_trigger_get_drvdata(trig); - unsigned int val; - bool enabled; - int ret; - - ret = kstrtouint(buf, 10, &val); - if (ret) - return ret; - - if (val > 100000) - return -EINVAL; - - enabled = get_enabled_gptimers() & st->t->bit; - - if (enabled) - disable_gptimers(st->t->bit); - - if (!val) - return count; - - val = get_sclk() / val; - if (val <= 4 || val <= st->duty) - return -EINVAL; - - set_gptimer_period(st->t->id, val); - set_gptimer_pwidth(st->t->id, val - st->duty); - - if (enabled) - enable_gptimers(st->t->bit); - - return count; -} - -static ssize_t frequency_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_trigger *trig = to_iio_trigger(dev); - struct bfin_tmr_state *st = iio_trigger_get_drvdata(trig); - unsigned int period = get_gptimer_period(st->t->id); - unsigned long val; - - if (!period) - val = 0; - else - val = get_sclk() / get_gptimer_period(st->t->id); - - return sprintf(buf, "%lu\n", val); -} - -static DEVICE_ATTR_RW(frequency); - -static struct attribute *iio_bfin_tmr_trigger_attrs[] = { - &dev_attr_frequency.attr, - NULL, -}; - -static const struct attribute_group iio_bfin_tmr_trigger_attr_group = { - .attrs = iio_bfin_tmr_trigger_attrs, -}; - -static const struct attribute_group *iio_bfin_tmr_trigger_attr_groups[] = { - &iio_bfin_tmr_trigger_attr_group, - NULL -}; - -static irqreturn_t iio_bfin_tmr_trigger_isr(int irq, void *devid) -{ - struct bfin_tmr_state *st = devid; - - clear_gptimer_intr(st->t->id); - iio_trigger_poll(st->trig); - - return IRQ_HANDLED; -} - -static int iio_bfin_tmr_get_number(int irq) -{ - int i; - - for (i = 0; i < MAX_BLACKFIN_GPTIMERS; i++) - if (iio_bfin_timer_code[i].irq == irq) - return i; - - return -ENODEV; -} - -static const struct iio_trigger_ops iio_bfin_tmr_trigger_ops = { - .set_trigger_state = iio_bfin_tmr_set_state, -}; - -static int iio_bfin_tmr_trigger_probe(struct platform_device *pdev) -{ - struct iio_bfin_timer_trigger_pdata *pdata; - struct bfin_tmr_state *st; - unsigned int config; - int ret; - - st = devm_kzalloc(&pdev->dev, sizeof(*st), GFP_KERNEL); - if (!st) - return -ENOMEM; - - st->irq = platform_get_irq(pdev, 0); - if (st->irq < 0) { - dev_err(&pdev->dev, "No IRQs specified"); - return st->irq; - } - - ret = iio_bfin_tmr_get_number(st->irq); - if (ret < 0) - return ret; - - st->timer_num = ret; - st->t = &iio_bfin_timer_code[st->timer_num]; - - st->trig = iio_trigger_alloc("bfintmr%d", st->timer_num); - if (!st->trig) - return -ENOMEM; - - st->trig->ops = &iio_bfin_tmr_trigger_ops; - st->trig->dev.groups = iio_bfin_tmr_trigger_attr_groups; - iio_trigger_set_drvdata(st->trig, st); - ret = iio_trigger_register(st->trig); - if (ret) - goto out; - - ret = request_irq(st->irq, iio_bfin_tmr_trigger_isr, - 0, st->trig->name, st); - if (ret) { - dev_err(&pdev->dev, - "request IRQ-%d failed", st->irq); - goto out1; - } - - config = PWM_OUT | PERIOD_CNT | IRQ_ENA; - - pdata = dev_get_platdata(&pdev->dev); - if (pdata && pdata->output_enable) { - unsigned long long val; - - st->output_enable = true; - - ret = peripheral_request(st->t->pin, st->trig->name); - if (ret) - goto out_free_irq; - - val = (unsigned long long)get_sclk() * pdata->duty_ns; - do_div(val, NSEC_PER_SEC); - st->duty = val; - - /** - * The interrupt will be generated at the end of the period, - * since we want the interrupt to be generated at end of the - * pulse we invert both polarity and duty cycle, so that the - * pulse will be generated directly before the interrupt. - */ - if (pdata->active_low) - config |= PULSE_HI; - } else { - st->duty = 1; - config |= OUT_DIS; - } - - set_gptimer_config(st->t->id, config); - - dev_info(&pdev->dev, "iio trigger Blackfin TMR%d, IRQ-%d", - st->timer_num, st->irq); - platform_set_drvdata(pdev, st); - - return 0; -out_free_irq: - free_irq(st->irq, st); -out1: - iio_trigger_unregister(st->trig); -out: - iio_trigger_free(st->trig); - return ret; -} - -static int iio_bfin_tmr_trigger_remove(struct platform_device *pdev) -{ - struct bfin_tmr_state *st = platform_get_drvdata(pdev); - - disable_gptimers(st->t->bit); - if (st->output_enable) - peripheral_free(st->t->pin); - free_irq(st->irq, st); - iio_trigger_unregister(st->trig); - iio_trigger_free(st->trig); - - return 0; -} - -static struct platform_driver iio_bfin_tmr_trigger_driver = { - .driver = { - .name = "iio_bfin_tmr_trigger", - }, - .probe = iio_bfin_tmr_trigger_probe, - .remove = iio_bfin_tmr_trigger_remove, -}; - -module_platform_driver(iio_bfin_tmr_trigger_driver); - -MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); -MODULE_DESCRIPTION("Blackfin system timer based trigger for the iio subsystem"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:iio-trig-bfin-timer"); diff --git a/drivers/staging/iio/trigger/iio-trig-bfin-timer.h b/drivers/staging/iio/trigger/iio-trig-bfin-timer.h deleted file mode 100644 index fb05a2a8397c..000000000000 --- a/drivers/staging/iio/trigger/iio-trig-bfin-timer.h +++ /dev/null @@ -1,25 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __IIO_BFIN_TIMER_TRIGGER_H__ -#define __IIO_BFIN_TIMER_TRIGGER_H__ - -/** - * struct iio_bfin_timer_trigger_pdata - timer trigger platform data - * @output_enable: Enable external trigger pulse generation. - * @active_low: Whether the trigger pulse is active low. - * @duty_ns: Length of the trigger pulse in nanoseconds. - * - * This struct is used to configure the output pulse generation of the blackfin - * timer trigger. If output_enable is set to true an external trigger signal - * will generated on the pin corresponding to the timer. This is useful for - * converters which needs an external signal to start conversion. active_low and - * duty_ns are used to configure the type of the trigger pulse. If output_enable - * is set to false no external trigger pulse will be generated and active_low - * and duty_ns are ignored. - **/ -struct iio_bfin_timer_trigger_pdata { - bool output_enable; - bool active_low; - unsigned int duty_ns; -}; - -#endif |