diff options
| -rw-r--r-- | Documentation/kernel-parameters.txt | 6 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/sleep.c | 2 | ||||
| -rw-r--r-- | drivers/acpi/sleep/main.c | 276 | ||||
| -rw-r--r-- | drivers/base/power/main.c | 2 | ||||
| -rw-r--r-- | include/linux/acpi.h | 3 | ||||
| -rw-r--r-- | include/linux/suspend.h | 14 | ||||
| -rw-r--r-- | kernel/power/disk.c | 28 | ||||
| -rw-r--r-- | kernel/power/main.c | 10 |
8 files changed, 215 insertions, 126 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 9cf7b34f2db0..18d793ea0dd3 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -147,10 +147,14 @@ and is between 256 and 4096 characters. It is defined in the file default: 0 acpi_sleep= [HW,ACPI] Sleep options - Format: { s3_bios, s3_mode, s3_beep } + Format: { s3_bios, s3_mode, s3_beep, old_ordering } See Documentation/power/video.txt for s3_bios and s3_mode. s3_beep is for debugging; it makes the PC's speaker beep as soon as the kernel's real-mode entry point is called. + old_ordering causes the ACPI 1.0 ordering of the _PTS + control method, wrt putting devices into low power + states, to be enforced (the ACPI 2.0 ordering of _PTS is + used by default). acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode Format: { level | edge | high | low } diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index afc25ee9964b..882e970032d5 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -124,6 +124,8 @@ static int __init acpi_sleep_setup(char *str) acpi_realmode_flags |= 2; if (strncmp(str, "s3_beep", 7) == 0) acpi_realmode_flags |= 4; + if (strncmp(str, "old_ordering", 12) == 0) + acpi_old_suspend_ordering(); str = strchr(str, ','); if (str != NULL) str += strspn(str, ", \t"); diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 0f2caea2fc83..4addf8ad50ae 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -24,10 +24,6 @@ u8 sleep_states[ACPI_S_STATE_COUNT]; -#ifdef CONFIG_PM_SLEEP -static u32 acpi_target_sleep_state = ACPI_STATE_S0; -#endif - static int acpi_sleep_prepare(u32 acpi_state) { #ifdef CONFIG_ACPI_SLEEP @@ -50,9 +46,96 @@ static int acpi_sleep_prepare(u32 acpi_state) return 0; } -#ifdef CONFIG_SUSPEND -static struct platform_suspend_ops acpi_suspend_ops; +#ifdef CONFIG_PM_SLEEP +static u32 acpi_target_sleep_state = ACPI_STATE_S0; + +/* + * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the + * user to request that behavior by using the 'acpi_old_suspend_ordering' + * kernel command line option that causes the following variable to be set. + */ +static bool old_suspend_ordering; + +void __init acpi_old_suspend_ordering(void) +{ + old_suspend_ordering = true; +} + +/** + * acpi_pm_disable_gpes - Disable the GPEs. + */ +static int acpi_pm_disable_gpes(void) +{ + acpi_hw_disable_all_gpes(); + return 0; +} + +/** + * __acpi_pm_prepare - Prepare the platform to enter the target state. + * + * If necessary, set the firmware waking vector and do arch-specific + * nastiness to get the wakeup code to the waking vector. + */ +static int __acpi_pm_prepare(void) +{ + int error = acpi_sleep_prepare(acpi_target_sleep_state); + + if (error) + acpi_target_sleep_state = ACPI_STATE_S0; + return error; +} + +/** + * acpi_pm_prepare - Prepare the platform to enter the target sleep + * state and disable the GPEs. + */ +static int acpi_pm_prepare(void) +{ + int error = __acpi_pm_prepare(); + + if (!error) + acpi_hw_disable_all_gpes(); + return error; +} + +/** + * acpi_pm_finish - Instruct the platform to leave a sleep state. + * + * This is called after we wake back up (or if entering the sleep state + * failed). + */ +static void acpi_pm_finish(void) +{ + u32 acpi_state = acpi_target_sleep_state; + + if (acpi_state == ACPI_STATE_S0) + return; + printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n", + acpi_state); + acpi_disable_wakeup_device(acpi_state); + acpi_leave_sleep_state(acpi_state); + + /* reset firmware waking vector */ + acpi_set_firmware_waking_vector((acpi_physical_address) 0); + + acpi_target_sleep_state = ACPI_STATE_S0; +} + +/** + * acpi_pm_end - Finish up suspend sequence. + */ +static void acpi_pm_end(void) +{ + /* + * This is necessary in case acpi_pm_finish() is not called during a + * failing transition to a sleep state. + */ + acpi_target_sleep_state = ACPI_STATE_S0; +} +#endif /* CONFIG_PM_SLEEP */ + +#ifdef CONFIG_SUSPEND extern void do_suspend_lowlevel(void); static u32 acpi_suspend_states[] = { @@ -66,7 +149,6 @@ static u32 acpi_suspend_states[] = { * acpi_suspend_begin - Set the target system sleep state to the state * associated with given @pm_state, if supported. */ - static int acpi_suspend_begin(suspend_state_t pm_state) { u32 acpi_state = acpi_suspend_states[pm_state]; @@ -83,25 +165,6 @@ static int acpi_suspend_begin(suspend_state_t pm_state) } /** - * acpi_suspend_prepare - Do preliminary suspend work. - * - * If necessary, set the firmware waking vector and do arch-specific - * nastiness to get the wakeup code to the waking vector. - */ - -static int acpi_suspend_prepare(void) -{ - int error = acpi_sleep_prepare(acpi_target_sleep_state); - - if (error) { - acpi_target_sleep_state = ACPI_STATE_S0; - return error; - } - - return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT; -} - -/** * acpi_suspend_enter - Actually enter a sleep state. * @pm_state: ignored * @@ -109,7 +172,6 @@ static int acpi_suspend_prepare(void) * assembly, which in turn call acpi_enter_sleep_state(). * It's unfortunate, but it works. Please fix if you're feeling frisky. */ - static int acpi_suspend_enter(suspend_state_t pm_state) { acpi_status status = AE_OK; @@ -166,39 +228,6 @@ static int acpi_suspend_enter(suspend_state_t pm_state) return ACPI_SUCCESS(status) ? 0 : -EFAULT; } -/** - * acpi_suspend_finish - Instruct the platform to leave a sleep state. - * - * This is called after we wake back up (or if entering the sleep state - * failed). - */ - -static void acpi_suspend_finish(void) -{ - u32 acpi_state = acpi_target_sleep_state; - - acpi_disable_wakeup_device(acpi_state); - acpi_leave_sleep_state(acpi_state); - - /* reset firmware waking vector */ - acpi_set_firmware_waking_vector((acpi_physical_address) 0); - - acpi_target_sleep_state = ACPI_STATE_S0; -} - -/** - * acpi_suspend_end - Finish up suspend sequence. - */ - -static void acpi_suspend_end(void) -{ - /* - * This is necessary in case acpi_suspend_finish() is not called during a - * failing transition to a sleep state. - */ - acpi_target_sleep_state = ACPI_STATE_S0; -} - static int acpi_suspend_state_valid(suspend_state_t pm_state) { u32 acpi_state; @@ -218,10 +247,39 @@ static int acpi_suspend_state_valid(suspend_state_t pm_state) static struct platform_suspend_ops acpi_suspend_ops = { .valid = acpi_suspend_state_valid, .begin = acpi_suspend_begin, - .prepare = acpi_suspend_prepare, + .prepare = acpi_pm_prepare, + .enter = acpi_suspend_enter, + .finish = acpi_pm_finish, + .end = acpi_pm_end, +}; + +/** + * acpi_suspend_begin_old - Set the target system sleep state to the + * state associated with given @pm_state, if supported, and + * execute the _PTS control method. This function is used if the + * pre-ACPI 2.0 suspend ordering has been requested. + */ +static int acpi_suspend_begin_old(suspend_state_t pm_state) +{ + int error = acpi_suspend_begin(pm_state); + + if (!error) + error = __acpi_pm_prepare(); + return error; +} + +/* + * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has + * been requested. + */ +static struct platform_suspend_ops acpi_suspend_ops_old = { + .valid = acpi_suspend_state_valid, + .begin = acpi_suspend_begin_old, + .prepare = acpi_pm_disable_gpes, .enter = acpi_suspend_enter, - .finish = acpi_suspend_finish, - .end = acpi_suspend_end, + .finish = acpi_pm_finish, + .end = acpi_pm_end, + .recover = acpi_pm_finish, }; #endif /* CONFIG_SUSPEND */ @@ -229,22 +287,9 @@ static struct platform_suspend_ops acpi_suspend_ops = { static int acpi_hibernation_begin(void) { acpi_target_sleep_state = ACPI_STATE_S4; - return 0; } -static int acpi_hibernation_prepare(void) -{ - int error = acpi_sleep_prepare(ACPI_STATE_S4); - - if (error) { - acpi_target_sleep_state = ACPI_STATE_S0; - return error; - } - - return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT; -} - static int acpi_hibernation_enter(void) { acpi_status status = AE_OK; @@ -274,52 +319,55 @@ static void acpi_hibernation_leave(void) acpi_leave_sleep_state_prep(ACPI_STATE_S4); } -static void acpi_hibernation_finish(void) +static void acpi_pm_enable_gpes(void) { - acpi_disable_wakeup_device(ACPI_STATE_S4); - acpi_leave_sleep_state(ACPI_STATE_S4); - - /* reset firmware waking vector */ - acpi_set_firmware_waking_vector((acpi_physical_address) 0); - - acpi_target_sleep_state = ACPI_STATE_S0; + acpi_hw_enable_all_runtime_gpes(); } -static void acpi_hibernation_end(void) -{ - /* - * This is necessary in case acpi_hibernation_finish() is not called - * during a failing transition to the sleep state. - */ - acpi_target_sleep_state = ACPI_STATE_S0; -} +static struct platform_hibernation_ops acpi_hibernation_ops = { + .begin = acpi_hibernation_begin, + .end = acpi_pm_end, + .pre_snapshot = acpi_pm_prepare, + .finish = acpi_pm_finish, + .prepare = acpi_pm_prepare, + .enter = acpi_hibernation_enter, + .leave = acpi_hibernation_leave, + .pre_restore = acpi_pm_disable_gpes, + .restore_cleanup = acpi_pm_enable_gpes, +}; -static int acpi_hibernation_pre_restore(void) +/** + * acpi_hibernation_begin_old - Set the target system sleep state to + * ACPI_STATE_S4 and execute the _PTS control method. This + * function is used if the pre-ACPI 2.0 suspend ordering has been + * requested. + */ +static int acpi_hibernation_begin_old(void) { - acpi_status status; - - status = acpi_hw_disable_all_gpes(); - - return ACPI_SUCCESS(status) ? 0 : -EFAULT; -} + int error = acpi_sleep_prepare(ACPI_STATE_S4); -static void acpi_hibernation_restore_cleanup(void) -{ - acpi_hw_enable_all_runtime_gpes(); + if (!error) + acpi_target_sleep_state = ACPI_STATE_S4; + return error; } -static struct platform_hibernation_ops acpi_hibernation_ops = { - .begin = acpi_hibernation_begin, - .end = acpi_hibernation_end, - .pre_snapshot = acpi_hibernation_prepare, - .finish = acpi_hibernation_finish, - .prepare = acpi_hibernation_prepare, +/* + * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has + * been requested. + */ +static struct platform_hibernation_ops acpi_hibernation_ops_old = { + .begin = acpi_hibernation_begin_old, + .end = acpi_pm_end, + .pre_snapshot = acpi_pm_disable_gpes, + .finish = acpi_pm_finish, + .prepare = acpi_pm_disable_gpes, .enter = acpi_hibernation_enter, .leave = acpi_hibernation_leave, - .pre_restore = acpi_hibernation_pre_restore, - .restore_cleanup = acpi_hibernation_restore_cleanup, + .pre_restore = acpi_pm_disable_gpes, + .restore_cleanup = acpi_pm_enable_gpes, + .recover = acpi_pm_finish, }; -#endif /* CONFIG_HIBERNATION */ +#endif /* CONFIG_HIBERNATION */ int acpi_suspend(u32 acpi_state) { @@ -461,13 +509,15 @@ int __init acpi_sleep_init(void) } } - suspend_set_ops(&acpi_suspend_ops); + suspend_set_ops(old_suspend_ordering ? + &acpi_suspend_ops_old : &acpi_suspend_ops); #endif #ifdef CONFIG_HIBERNATION status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b); if (ACPI_SUCCESS(status)) { - hibernation_set_ops(&acpi_hibernation_ops); + hibernation_set_ops(old_suspend_ordering ? + &acpi_hibernation_ops_old : &acpi_hibernation_ops); sleep_states[ACPI_STATE_S4] = 1; printk(" S4"); } diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index d571204aaff7..3250c5257b74 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -781,8 +781,6 @@ int device_suspend(pm_message_t state) error = dpm_prepare(state); if (!error) error = dpm_suspend(state); - if (error) - device_resume(resume_event(state)); return error; } EXPORT_SYMBOL_GPL(device_suspend); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 41f7ce7edd7a..33adcf91ef41 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -234,6 +234,9 @@ int acpi_check_region(resource_size_t start, resource_size_t n, int acpi_check_mem_region(resource_size_t start, resource_size_t n, const char *name); +#ifdef CONFIG_PM_SLEEP +void __init acpi_old_suspend_ordering(void); +#endif /* CONFIG_PM_SLEEP */ #else /* CONFIG_ACPI */ static inline int early_acpi_boot_init(void) diff --git a/include/linux/suspend.h b/include/linux/suspend.h index a6977423baf7..e8e69159af71 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -86,6 +86,11 @@ typedef int __bitwise suspend_state_t; * that implement @begin(), but platforms implementing @begin() should * also provide a @end() which cleans up transitions aborted before * @enter(). + * + * @recover: Recover the platform from a suspend failure. + * Called by the PM core if the suspending of devices fails. + * This callback is optional and should only be implemented by platforms + * which require special recovery actions in that situation. */ struct platform_suspend_ops { int (*valid)(suspend_state_t state); @@ -94,6 +99,7 @@ struct platform_suspend_ops { int (*enter)(suspend_state_t state); void (*finish)(void); void (*end)(void); + void (*recover)(void); }; #ifdef CONFIG_SUSPEND @@ -149,7 +155,7 @@ extern void mark_free_pages(struct zone *zone); * The methods in this structure allow a platform to carry out special * operations required by it during a hibernation transition. * - * All the methods below must be implemented. + * All the methods below, except for @recover(), must be implemented. * * @begin: Tell the platform driver that we're starting hibernation. * Called right after shrinking memory and before freezing devices. @@ -189,6 +195,11 @@ extern void mark_free_pages(struct zone *zone); * @restore_cleanup: Clean up after a failing image restoration. * Called right after the nonboot CPUs have been enabled and before * thawing devices (runs with IRQs on). + * + * @recover: Recover the platform from a failure to suspend devices. + * Called by the PM core if the suspending of devices during hibernation + * fails. This callback is optional and should only be implemented by + * platforms which require special recovery actions in that situation. */ struct platform_hibernation_ops { int (*begin)(void); @@ -200,6 +211,7 @@ struct platform_hibernation_ops { void (*leave)(void); int (*pre_restore)(void); void (*restore_cleanup)(void); + void (*recover)(void); }; #ifdef CONFIG_HIBERNATION diff --git a/kernel/power/disk.c b/kernel/power/disk.c index d416be0efa8a..f011e0870b52 100644 --- a/kernel/power/disk.c +++ b/kernel/power/disk.c @@ -180,6 +180,17 @@ static void platform_restore_cleanup(int platform_mode) } /** + * platform_recover - recover the platform from a failure to suspend + * devices. + */ + +static void platform_recover(int platform_mode) +{ + if (platform_mode && hibernation_ops && hibernation_ops->recover) + hibernation_ops->recover(); +} + +/** * create_image - freeze devices that need to be frozen with interrupts * off, create the hibernation image and thaw those devices. Control * reappears in this routine after a restore. @@ -258,10 +269,10 @@ int hibernation_snapshot(int platform_mode) suspend_console(); error = device_suspend(PMSG_FREEZE); if (error) - goto Resume_console; + goto Recover_platform; if (hibernation_test(TEST_DEVICES)) - goto Resume_devices; + goto Recover_platform; error = platform_pre_snapshot(platform_mode); if (error || hibernation_test(TEST_PLATFORM)) @@ -285,11 +296,14 @@ int hibernation_snapshot(int platform_mode) Resume_devices: device_resume(in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE); - Resume_console: resume_console(); Close: platform_end(platform_mode); return error; + + Recover_platform: + platform_recover(platform_mode); + goto Resume_devices; } /** @@ -398,8 +412,11 @@ int hibernation_platform_enter(void) suspend_console(); error = device_suspend(PMSG_HIBERNATE); - if (error) - goto Resume_console; + if (error) { + if (hibernation_ops->recover) + hibernation_ops->recover(); + goto Resume_devices; + } error = hibernation_ops->prepare(); if (error) @@ -428,7 +445,6 @@ int hibernation_platform_enter(void) hibernation_ops->finish(); Resume_devices: device_resume(PMSG_RESTORE); - Resume_console: resume_console(); Close: hibernation_ops->end(); diff --git a/kernel/power/main.c b/kernel/power/main.c index d023b6b584e5..3398f4651aa1 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -269,11 +269,11 @@ int suspend_devices_and_enter(suspend_state_t state) error = device_suspend(PMSG_SUSPEND); if (error) { printk(KERN_ERR "PM: Some devices failed to suspend\n"); - goto Resume_console; + goto Recover_platform; } if (suspend_test(TEST_DEVICES)) - goto Resume_devices; + goto Recover_platform; if (suspend_ops->prepare) { error = suspend_ops->prepare(); @@ -294,12 +294,16 @@ int suspend_devices_and_enter(suspend_state_t state) suspend_ops->finish(); Resume_devices: device_resume(PMSG_RESUME); - Resume_console: resume_console(); Close: if (suspend_ops->end) suspend_ops->end(); return error; + + Recover_platform: + if (suspend_ops->recover) + suspend_ops->recover(); + goto Resume_devices; } /** |