diff options
40 files changed, 459 insertions, 316 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5876aef72dfe..70505d8f85c5 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -540,7 +540,7 @@ config ARCH_DOVE select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI - select PLAT_ORION + select PLAT_ORION_LEGACY select USB_ARCH_HAS_EHCI help Support for the Marvell Dove SoC 88AP510 @@ -551,7 +551,7 @@ config ARCH_KIRKWOOD select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS - select PLAT_ORION + select PLAT_ORION_LEGACY help Support for the following Marvell Kirkwood series SoCs: 88F6180, 88F6192 and 88F6281. @@ -577,7 +577,7 @@ config ARCH_MV78XX0 select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS - select PLAT_ORION + select PLAT_ORION_LEGACY help Support for the following Marvell MV78xx0 series SoCs: MV781x0, MV782x0. @@ -589,7 +589,7 @@ config ARCH_ORION5X select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS - select PLAT_ORION + select PLAT_ORION_LEGACY help Support for the following Marvell Orion 5x series SoCs: Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), @@ -1146,6 +1146,10 @@ config PLAT_ORION select IRQ_DOMAIN select COMMON_CLK +config PLAT_ORION_LEGACY + bool + select PLAT_ORION + config PLAT_PXA bool diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 6b6b932a5a7d..16cc82cdaa81 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -63,6 +63,11 @@ reg = <0xd0020300 0x30>; interrupts = <37>, <38>, <39>, <40>; }; + + addr-decoding@d0020000 { + compatible = "marvell,armada-addr-decoding-controller"; + reg = <0xd0020000 0x258>; + }; }; }; diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 28475bb7d36f..b37bef1d5ffa 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -41,12 +41,12 @@ ****************************************************************************/ static struct map_desc dove_io_desc[] __initdata = { { - .virtual = DOVE_SB_REGS_VIRT_BASE, + .virtual = (unsigned long) DOVE_SB_REGS_VIRT_BASE, .pfn = __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE), .length = DOVE_SB_REGS_SIZE, .type = MT_DEVICE, }, { - .virtual = DOVE_NB_REGS_VIRT_BASE, + .virtual = (unsigned long) DOVE_NB_REGS_VIRT_BASE, .pfn = __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE), .length = DOVE_NB_REGS_SIZE, .type = MT_DEVICE, diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h index f953bb54aa9d..99f259e8cf33 100644 --- a/arch/arm/mach-dove/include/mach/bridge-regs.h +++ b/arch/arm/mach-dove/include/mach/bridge-regs.h @@ -13,22 +13,22 @@ #include <mach/dove.h> -#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0000) +#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0000) -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104) #define CPU_CTRL_PCIE0_LINK 0x00000001 #define CPU_RESET 0x00000002 #define CPU_CTRL_PCIE1_LINK 0x00000008 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108) #define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c) #define SOFT_RESET 0x00000001 #define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200) #define IRQ_CAUSE_LOW_OFF 0x0000 #define IRQ_MASK_LOW_OFF 0x0004 #define FIQ_MASK_LOW_OFF 0x0008 @@ -47,9 +47,9 @@ #define ENDPOINT_MASK_HIGH (IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF) #define PCIE_INTERRUPT_MASK (IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF) -#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c) +#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE + 0x011c) -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) -#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300) #endif diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h index c91e3004a47b..661725e3115a 100644 --- a/arch/arm/mach-dove/include/mach/dove.h +++ b/arch/arm/mach-dove/include/mach/dove.h @@ -25,7 +25,7 @@ */ #define DOVE_CESA_PHYS_BASE 0xc8000000 -#define DOVE_CESA_VIRT_BASE 0xfdb00000 +#define DOVE_CESA_VIRT_BASE IOMEM(0xfdb00000) #define DOVE_CESA_SIZE SZ_1M #define DOVE_PCIE0_MEM_PHYS_BASE 0xe0000000 @@ -38,15 +38,15 @@ #define DOVE_BOOTROM_SIZE SZ_128M #define DOVE_SCRATCHPAD_PHYS_BASE 0xf0000000 -#define DOVE_SCRATCHPAD_VIRT_BASE 0xfdd00000 +#define DOVE_SCRATCHPAD_VIRT_BASE IOMEM(0xfdd00000) #define DOVE_SCRATCHPAD_SIZE SZ_1M #define DOVE_SB_REGS_PHYS_BASE 0xf1000000 -#define DOVE_SB_REGS_VIRT_BASE 0xfde00000 +#define DOVE_SB_REGS_VIRT_BASE IOMEM(0xfde00000) #define DOVE_SB_REGS_SIZE SZ_8M #define DOVE_NB_REGS_PHYS_BASE 0xf1800000 -#define DOVE_NB_REGS_VIRT_BASE 0xfe600000 +#define DOVE_NB_REGS_VIRT_BASE IOMEM(0xfe600000) #define DOVE_NB_REGS_SIZE SZ_8M #define DOVE_PCIE0_IO_PHYS_BASE 0xf2000000 @@ -62,75 +62,75 @@ */ /* SPI, I2C, UART */ -#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x11000) -#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12000) -#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12000) -#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12100) -#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12100) -#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12200) -#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12200) -#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12300) -#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12300) -#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x10600) -#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x14600) +#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x11000) +#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12000) +#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12000) +#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12100) +#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12100) +#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12200) +#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12200) +#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12300) +#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12300) +#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x10600) +#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x14600) /* North-South Bridge */ -#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000) -#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x20000) +#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x20000) +#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x20000) /* Cryptographic Engine */ -#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000) +#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x30000) /* PCIe 0 */ -#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x40000) +#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x40000) /* USB */ -#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x50000) -#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x51000) +#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x50000) +#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x51000) /* XOR 0 Engine */ -#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60800) -#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60800) -#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60A00) -#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60A00) +#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60800) +#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60800) +#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60A00) +#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60A00) /* XOR 1 Engine */ -#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60900) -#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60900) -#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60B00) -#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60B00) +#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60900) +#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60900) +#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60B00) +#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60B00) /* Gigabit Ethernet */ -#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x70000) +#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x70000) /* PCIe 1 */ -#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x80000) +#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x80000) /* CAFE */ -#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x92000) -#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x90000) -#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x94000) -#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x98000) +#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x92000) +#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x90000) +#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x94000) +#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x98000) /* SATA */ -#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xa0000) +#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xa0000) /* I2S/SPDIF */ -#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb0000) -#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb4000) +#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xb0000) +#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xb4000) /* NAND Flash Controller */ -#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xc0000) +#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xc0000) /* MPP, GPIO, Reset Sampling */ -#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0200) +#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0200) #define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10) -#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE | 0x014) -#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE | 0x018) -#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400) -#define DOVE_GPIO_HI_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0420) -#define DOVE_GPIO2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe8400) -#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c) +#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE + 0x014) +#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE + 0x018) +#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0400) +#define DOVE_GPIO_HI_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0420) +#define DOVE_GPIO2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe8400) +#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe803c) #define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1) #define DOVE_NAND_GPIO_EN (1 << 0) #define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_LO_VIRT_BASE + 0x40) @@ -142,44 +142,44 @@ #define DOVE_SD0_GPIO_SEL (1 << 0) /* Power Management */ -#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0000) +#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0000) #define DOVE_PMU_SIG_CTRL (DOVE_PMU_VIRT_BASE + 0x802c) /* Real Time Clock */ -#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xd8500) +#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xd8500) /* AC97 */ -#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe0000) -#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe0000) +#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xe0000) +#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe0000) /* Peripheral DMA */ -#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe4000) -#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe4000) +#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xe4000) +#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe4000) -#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE | 0xe802C) +#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE + 0xe802C) #define DOVE_TWSI_ENABLE_OPTION1 (1 << 7) -#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE | 0xe8030) +#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE + 0xe8030) #define DOVE_TWSI_ENABLE_OPTION2 (1 << 20) #define DOVE_TWSI_ENABLE_OPTION3 (1 << 21) #define DOVE_TWSI_OPTION3_GPIO (1 << 22) -#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xec000) -#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE | 0xe8034) +#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xec000) +#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE + 0xe8034) #define DOVE_SSP_ON_AU1 (1 << 0) #define DOVE_SSP_CLOCK_ENABLE (1 << 1) #define DOVE_SSP_BPB_CLOCK_SRC_SSP (1 << 11) /* Memory Controller */ -#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE | 0x00000) +#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE + 0x00000) /* LCD Controller */ -#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000) -#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x20000) -#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000) -#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x30000) +#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x10000) +#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x20000) +#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x10000) +#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x30000) /* Graphic Engine */ -#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x40000) +#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x40000) /* Video Engine */ -#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x400000) +#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x400000) #endif diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index 186357f3b4db..087711524e8a 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -100,19 +100,19 @@ void __init dove_init_irq(void) { int i; - orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)); - orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)); + orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); + orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); /* * Initialize gpiolib for GPIOs 0-71. */ - orion_gpio_init(NULL, 0, 32, (void __iomem *)DOVE_GPIO_LO_VIRT_BASE, 0, + orion_gpio_init(NULL, 0, 32, DOVE_GPIO_LO_VIRT_BASE, 0, IRQ_DOVE_GPIO_START, gpio0_irqs); - orion_gpio_init(NULL, 32, 32, (void __iomem *)DOVE_GPIO_HI_VIRT_BASE, 0, + orion_gpio_init(NULL, 32, 32, DOVE_GPIO_HI_VIRT_BASE, 0, IRQ_DOVE_GPIO_START + 32, gpio1_irqs); - orion_gpio_init(NULL, 64, 8, (void __iomem *)DOVE_GPIO2_VIRT_BASE, 0, + orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0, IRQ_DOVE_GPIO_START + 64, gpio2_irqs); /* diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c index 355332d502cb..bb15b26041cb 100644 --- a/arch/arm/mach-dove/pcie.c +++ b/arch/arm/mach-dove/pcie.c @@ -182,18 +182,18 @@ static struct hw_pci dove_pci __initdata = { .map_irq = dove_pcie_map_irq, }; -static void __init add_pcie_port(int index, unsigned long base) +static void __init add_pcie_port(int index, void __iomem *base) { printk(KERN_INFO "Dove PCIe port %d: ", index); - if (orion_pcie_link_up((void __iomem *)base)) { + if (orion_pcie_link_up(base)) { struct pcie_port *pp = &pcie_port[num_pcie_ports++]; printk(KERN_INFO "link up\n"); pp->index = index; pp->root_bus_nr = -1; - pp->base = (void __iomem *)base; + pp->base = base; spin_lock_init(&pp->conf_lock); memset(&pp->res, 0, sizeof(pp->res)); } else { diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c index e9a7180863d9..8f0d162a1e1d 100644 --- a/arch/arm/mach-kirkwood/addr-map.c +++ b/arch/arm/mach-kirkwood/addr-map.c @@ -86,5 +86,6 @@ void __init kirkwood_setup_cpu_mbus(void) /* * Setup MBUS dram target info. */ - orion_setup_cpu_mbus_target(&addr_map_cfg, DDR_WINDOW_CPU_BASE); + orion_setup_cpu_mbus_target(&addr_map_cfg, + (void __iomem *) DDR_WINDOW_CPU_BASE); } diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 5c38c94b79a2..3991077f58a2 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -42,7 +42,7 @@ ****************************************************************************/ static struct map_desc kirkwood_io_desc[] __initdata = { { - .virtual = KIRKWOOD_REGS_VIRT_BASE, + .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE, .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE), .length = KIRKWOOD_REGS_SIZE, .type = MT_DEVICE, @@ -205,8 +205,7 @@ static struct clk *tclk; static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx) { - return clk_register_gate(NULL, name, "tclk", 0, - (void __iomem *)CLOCK_GATING_CTRL, + return clk_register_gate(NULL, name, "tclk", 0, CLOCK_GATING_CTRL, bit_idx, 0, &gating_lock); } @@ -215,8 +214,7 @@ static struct clk __init *kirkwood_register_gate_fn(const char *name, void (*fn_en)(void), void (*fn_dis)(void)) { - return clk_register_gate_fn(NULL, name, "tclk", 0, - (void __iomem *)CLOCK_GATING_CTRL, + return clk_register_gate_fn(NULL, name, "tclk", 0, CLOCK_GATING_CTRL, bit_idx, 0, &gating_lock, fn_en, fn_dis); } diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index a115142f8690..5c82b7dce4e2 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -13,37 +13,37 @@ #include <mach/kirkwood.h> -#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0100) +#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100) #define CPU_CONFIG_ERROR_PROP 0x00000004 -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104) #define CPU_RESET 0x00000002 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108) #define WDT_RESET_OUT_EN 0x00000002 #define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c) #define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE + 0x0110) #define WDT_INT_REQ 0x0008 #define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200) #define IRQ_CAUSE_LOW_OFF 0x0000 #define IRQ_MASK_LOW_OFF 0x0004 #define IRQ_CAUSE_HIGH_OFF 0x0010 #define IRQ_MASK_HIGH_OFF 0x0014 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) -#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300) -#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) +#define L2_CONFIG_REG (BRIDGE_VIRT_BASE + 0x0128) #define L2_WRITETHROUGH 0x00000010 -#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE | 0x11c) +#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE + 0x11c) #define CGC_BIT_GE0 (0) #define CGC_BIT_PEX0 (2) #define CGC_BIT_USB0 (3) diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index af4f0000dcef..041653a04a9c 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -45,7 +45,7 @@ #define KIRKWOOD_PCIE_IO_SIZE SZ_64K #define KIRKWOOD_REGS_PHYS_BASE 0xf1000000 -#define KIRKWOOD_REGS_VIRT_BASE 0xfed00000 +#define KIRKWOOD_REGS_VIRT_BASE IOMEM(0xfed00000) #define KIRKWOOD_REGS_SIZE SZ_1M #define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000 @@ -59,61 +59,61 @@ /* * Register Map */ -#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000) -#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500) -#define DDR_OPERATION_BASE (DDR_VIRT_BASE | 0x1418) - -#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000) -#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000) -#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE | 0x0030) -#define DEVICE_ID (DEV_BUS_VIRT_BASE | 0x0034) -#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0100) -#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0140) -#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0300) -#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0600) -#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000) -#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) -#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000) -#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) -#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) - -#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) -#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x20000) - -#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000) - -#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000) -#define PCIE_LINK_CTRL (PCIE_VIRT_BASE | 0x70) -#define PCIE_STATUS (PCIE_VIRT_BASE | 0x1a04) -#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x44000) -#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE | 0x70) -#define PCIE1_STATUS (PCIE1_VIRT_BASE | 0x1a04) - -#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000) - -#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60800) -#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60800) -#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60900) -#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60900) -#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60A00) -#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60A00) -#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60B00) -#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60B00) - -#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x70000) -#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000) - -#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000) -#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x80000) -#define SATA0_IF_CTRL (SATA_VIRT_BASE | 0x2050) -#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE | 0x2330) -#define SATA1_IF_CTRL (SATA_VIRT_BASE | 0x4050) -#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE | 0x4330) - -#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000) - -#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0xA0000) -#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0xA0000) +#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000) +#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE + 0x1500) +#define DDR_OPERATION_BASE (DDR_VIRT_BASE + 0x1418) + +#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000) +#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000) +#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE + 0x0030) +#define DEVICE_ID (DEV_BUS_VIRT_BASE + 0x0034) +#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100) +#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0140) +#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0300) +#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0600) +#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000) +#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000) +#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000) +#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100) +#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100) + +#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000) +#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000) + +#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000) + +#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x40000) +#define PCIE_LINK_CTRL (PCIE_VIRT_BASE + 0x70) +#define PCIE_STATUS (PCIE_VIRT_BASE + 0x1a04) +#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x44000) +#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE + 0x70) +#define PCIE1_STATUS (PCIE1_VIRT_BASE + 0x1a04) + +#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x50000) + +#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60800) +#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60800) +#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60900) +#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60900) +#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60A00) +#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60A00) +#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60B00) +#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60B00) + +#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x70000) +#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x74000) + +#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x80000) +#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x80000) +#define SATA0_IF_CTRL (SATA_VIRT_BASE + 0x2050) +#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE + 0x2330) +#define SATA1_IF_CTRL (SATA_VIRT_BASE + 0x4050) +#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE + 0x4330) + +#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x90000) + +#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0xA0000) +#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0xA0000) /* * Supported devices and revisions. diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index 20149a7fd280..884703535a0a 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -10,6 +10,7 @@ #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/irq.h> +#include <linux/io.h> #include <mach/bridge-regs.h> #include <plat/orion-gpio.h> #include <plat/irq.h> @@ -30,14 +31,14 @@ static int __initdata gpio1_irqs[4] = { void __init kirkwood_init_irq(void) { - orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)); - orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)); + orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); + orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); /* * Initialize gpiolib for GPIOs 0-49. */ - orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_LOW_VIRT_BASE, 0, + orion_gpio_init(NULL, 0, 32, GPIO_LOW_VIRT_BASE, 0, IRQ_KIRKWOOD_GPIO_START, gpio0_irqs); - orion_gpio_init(NULL, 32, 18, (void __iomem *)GPIO_HIGH_VIRT_BASE, 0, + orion_gpio_init(NULL, 32, 18, GPIO_HIGH_VIRT_BASE, 0, IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs); } diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 532d8acb38f9..ec544918b12c 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -47,8 +47,8 @@ void kirkwood_enable_pcie(void) void kirkwood_pcie_id(u32 *dev, u32 *rev) { kirkwood_enable_pcie(); - *dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE); - *rev = orion_pcie_rev((void __iomem *)PCIE_VIRT_BASE); + *dev = orion_pcie_dev_id(PCIE_VIRT_BASE); + *rev = orion_pcie_rev(PCIE_VIRT_BASE); } struct pcie_port { @@ -133,7 +133,7 @@ static struct pci_ops pcie_ops = { static void __init pcie0_ioresources_init(struct pcie_port *pp) { - pp->base = (void __iomem *)PCIE_VIRT_BASE; + pp->base = PCIE_VIRT_BASE; pp->irq = IRQ_KIRKWOOD_PCIE; /* @@ -147,7 +147,7 @@ static void __init pcie0_ioresources_init(struct pcie_port *pp) static void __init pcie1_ioresources_init(struct pcie_port *pp) { - pp->base = (void __iomem *)PCIE1_VIRT_BASE; + pp->base = PCIE1_VIRT_BASE; pp->irq = IRQ_KIRKWOOD_PCIE1; /* @@ -255,11 +255,11 @@ static struct hw_pci kirkwood_pci __initdata = { .map_irq = kirkwood_pcie_map_irq, }; -static void __init add_pcie_port(int index, unsigned long base) +static void __init add_pcie_port(int index, void __iomem *base) { printk(KERN_INFO "Kirkwood PCIe port %d: ", index); - if (orion_pcie_link_up((void __iomem *)base)) { + if (orion_pcie_link_up(base)) { printk(KERN_INFO "link up\n"); pcie_port_map[num_pcie_ports++] = index; } else diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index 5bbca2680442..367a9400f532 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -20,6 +20,7 @@ #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/input.h> +#include <linux/io.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/kirkwood.h> @@ -161,7 +162,7 @@ static int __init ts41x_pci_init(void) * (Marvell 88sx7042/sata_mv) is known to stop working * after a few minutes. */ - orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE); + orion_pcie_reset(PCIE_VIRT_BASE); kirkwood_pcie_id(&dev, &rev); if (dev == MV88F6282_DEV_ID) diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c index 137e479d15a0..343c435b4176 100644 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -48,7 +48,7 @@ static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, i * so we don't need to take that into account here. */ - return (void __iomem *)((win < 8) ? WIN0_OFF(win) : WIN8_OFF(win)); + return (win < 8) ? WIN0_OFF(win) : WIN8_OFF(win); } /* @@ -72,10 +72,10 @@ void __init mv78xx0_setup_cpu_mbus(void) */ if (mv78xx0_core_index() == 0) orion_setup_cpu_mbus_target(&addr_map_cfg, - DDR_WINDOW_CPU0_BASE); + (void __iomem *) DDR_WINDOW_CPU0_BASE); else orion_setup_cpu_mbus_target(&addr_map_cfg, - DDR_WINDOW_CPU1_BASE); + (void __iomem *) DDR_WINDOW_CPU1_BASE); } void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size, diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index a6f3cd21e8c2..131cd4883f3d 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -130,12 +130,12 @@ static int get_tclk(void) ****************************************************************************/ static struct map_desc mv78xx0_io_desc[] __initdata = { { - .virtual = MV78XX0_CORE_REGS_VIRT_BASE, + .virtual = (unsigned long) MV78XX0_CORE_REGS_VIRT_BASE, .pfn = 0, .length = MV78XX0_CORE_REGS_SIZE, .type = MT_DEVICE, }, { - .virtual = MV78XX0_REGS_VIRT_BASE, + .virtual = (unsigned long) MV78XX0_REGS_VIRT_BASE, .pfn = __phys_to_pfn(MV78XX0_REGS_PHYS_BASE), .length = MV78XX0_REGS_SIZE, .type = MT_DEVICE, diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h index eb187e0e059b..5f03484584d4 100644 --- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h +++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h @@ -11,18 +11,18 @@ #include <mach/mv78xx0.h> -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104) #define L2_WRITETHROUGH 0x00020000 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108) #define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c) #define SOFT_RESET 0x00000001 #define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200) #define IRQ_CAUSE_ERR_OFF 0x0000 #define IRQ_CAUSE_LOW_OFF 0x0004 #define IRQ_CAUSE_HIGH_OFF 0x0008 @@ -30,7 +30,7 @@ #define IRQ_MASK_LOW_OFF 0x0010 #define IRQ_MASK_HIGH_OFF 0x0014 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) -#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300) #endif diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index bd03fed1128e..46200a183cf2 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -41,7 +41,7 @@ */ #define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000 #define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000 -#define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000 +#define MV78XX0_CORE_REGS_VIRT_BASE IOMEM(0xfe400000) #define MV78XX0_CORE_REGS_PHYS_BASE 0xfe400000 #define MV78XX0_CORE_REGS_SIZE SZ_16K @@ -49,7 +49,7 @@ #define MV78XX0_PCIE_IO_SIZE SZ_1M #define MV78XX0_REGS_PHYS_BASE 0xf1000000 -#define MV78XX0_REGS_VIRT_BASE 0xfd000000 +#define MV78XX0_REGS_VIRT_BASE IOMEM(0xfd000000) #define MV78XX0_REGS_SIZE SZ_1M #define MV78XX0_PCIE_MEM_PHYS_BASE 0xc0000000 @@ -64,47 +64,47 @@ /* * Register Map */ -#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x00000) -#define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE | 0x1500) -#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE | 0x1570) - -#define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x10000) -#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000) -#define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE | 0x0030) -#define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE | 0x0034) -#define GPIO_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0100) -#define I2C_0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000) -#define I2C_1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1100) -#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) -#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000) -#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) -#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) -#define UART2_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2200) -#define UART2_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2200) -#define UART3_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2300) -#define UART3_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2300) - -#define GE10_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x30000) -#define GE11_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x34000) - -#define PCIE00_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x40000) -#define PCIE01_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x44000) -#define PCIE02_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x48000) -#define PCIE03_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x4c000) - -#define USB0_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x50000) -#define USB1_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x51000) -#define USB2_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x52000) - -#define GE00_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x70000) -#define GE01_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x74000) - -#define PCIE10_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x80000) -#define PCIE11_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x84000) -#define PCIE12_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x88000) -#define PCIE13_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x8c000) - -#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0xa0000) +#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x00000) +#define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE + 0x1500) +#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE + 0x1570) + +#define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x10000) +#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x10000) +#define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE + 0x0030) +#define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE + 0x0034) +#define GPIO_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100) +#define I2C_0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000) +#define I2C_1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1100) +#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000) +#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000) +#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100) +#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100) +#define UART2_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2200) +#define UART2_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2200) +#define UART3_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2300) +#define UART3_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2300) + +#define GE10_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x30000) +#define GE11_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x34000) + +#define PCIE00_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x40000) +#define PCIE01_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x44000) +#define PCIE02_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x48000) +#define PCIE03_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x4c000) + +#define USB0_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x50000) +#define USB1_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x51000) +#define USB2_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x52000) + +#define GE00_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x70000) +#define GE01_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x74000) + +#define PCIE10_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x80000) +#define PCIE11_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x84000) +#define PCIE12_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x88000) +#define PCIE13_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x8c000) + +#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0xa0000) /* * Supported devices and revisions. diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c index 4d720f2aedba..32073444024b 100644 --- a/arch/arm/mach-mv78xx0/irq.c +++ b/arch/arm/mach-mv78xx0/irq.c @@ -10,6 +10,7 @@ #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/irq.h> +#include <linux/io.h> #include <mach/bridge-regs.h> #include <plat/orion-gpio.h> #include <plat/irq.h> @@ -24,16 +25,16 @@ static int __initdata gpio0_irqs[4] = { void __init mv78xx0_init_irq(void) { - orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)); - orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)); - orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF)); + orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); + orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); + orion_irq_init(64, IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF); /* * Initialize gpiolib for GPIOs 0-31. (The GPIO interrupt mask * registers for core #1 are at an offset of 0x18 from those of * core #0.) */ - orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE, + orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE, mv78xx0_core_index() ? 0x18 : 0, IRQ_MV78XX0_GPIO_START, gpio0_irqs); } diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index 26a059b4f472..a9a154a646dd 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -34,8 +34,8 @@ static struct resource pcie_io_space; void __init mv78xx0_pcie_id(u32 *dev, u32 *rev) { - *dev = orion_pcie_dev_id((void __iomem *)PCIE00_VIRT_BASE); - *rev = orion_pcie_rev((void __iomem *)PCIE00_VIRT_BASE); + *dev = orion_pcie_dev_id(PCIE00_VIRT_BASE); + *rev = orion_pcie_rev(PCIE00_VIRT_BASE); } u32 pcie_port_size[8] = { @@ -223,11 +223,11 @@ static struct hw_pci mv78xx0_pci __initdata = { .map_irq = mv78xx0_pcie_map_irq, }; -static void __init add_pcie_port(int maj, int min, unsigned long base) +static void __init add_pcie_port(int maj, int min, void __iomem *base) { printk(KERN_INFO "MV78xx0 PCIe port %d.%d: ", maj, min); - if (orion_pcie_link_up((void __iomem *)base)) { + if (orion_pcie_link_up(base)) { struct pcie_port *pp = &pcie_port[num_pcie_ports++]; printk("link up\n"); @@ -235,7 +235,7 @@ static void __init add_pcie_port(int maj, int min, unsigned long base) pp->maj = maj; pp->min = min; pp->root_bus_nr = -1; - pp->base = (void __iomem *)base; + pp->base = base; spin_lock_init(&pp->conf_lock); memset(&pp->res, 0, sizeof(pp->res)); } else { @@ -249,7 +249,7 @@ void __init mv78xx0_pcie_init(int init_port0, int init_port1) if (init_port0) { add_pcie_port(0, 0, PCIE00_VIRT_BASE); - if (!orion_pcie_x4_mode((void __iomem *)PCIE00_VIRT_BASE)) { + if (!orion_pcie_x4_mode(PCIE00_VIRT_BASE)) { add_pcie_port(0, 1, PCIE01_VIRT_BASE); add_pcie_port(0, 2, PCIE02_VIRT_BASE); add_pcie_port(0, 3, PCIE03_VIRT_BASE); diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 6ea8998ab8f1..cbe566443063 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -1,4 +1,4 @@ ccflags-$(ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include obj-y += system-controller.o -obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o +obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o diff --git a/arch/arm/mach-mvebu/addr-map.c b/arch/arm/mach-mvebu/addr-map.c new file mode 100644 index 000000000000..fe454a4430be --- /dev/null +++ b/arch/arm/mach-mvebu/addr-map.c @@ -0,0 +1,134 @@ +/* + * Address map functions for Marvell 370 / XP SoCs + * + * Copyright (C) 2012 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mbus.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <plat/addr-map.h> + +/* + * Generic Address Decode Windows bit settings + */ +#define ARMADA_XP_TARGET_DEV_BUS 1 +#define ARMADA_XP_ATTR_DEV_BOOTROM 0x1D +#define ARMADA_XP_TARGET_ETH1 3 +#define ARMADA_XP_TARGET_PCIE_0_2 4 +#define ARMADA_XP_TARGET_ETH0 7 +#define ARMADA_XP_TARGET_PCIE_1_3 8 + +#define ARMADA_370_TARGET_DEV_BUS 1 +#define ARMADA_370_ATTR_DEV_BOOTROM 0x1D +#define ARMADA_370_TARGET_PCIE_0 4 +#define ARMADA_370_TARGET_PCIE_1 8 + +#define ARMADA_WINDOW_8_PLUS_OFFSET 0x90 +#define ARMADA_SDRAM_ADDR_DECODING_OFFSET 0x180 + +static const struct __initdata orion_addr_map_info +armada_xp_addr_map_info[] = { + /* + * Window for the BootROM, needed for SMP on Armada XP + */ + { 0, 0xfff00000, SZ_1M, ARMADA_XP_TARGET_DEV_BUS, + ARMADA_XP_ATTR_DEV_BOOTROM, -1 }, + /* End marker */ + { -1, 0, 0, 0, 0, 0 }, +}; + +static const struct __initdata orion_addr_map_info +armada_370_addr_map_info[] = { + /* End marker */ + { -1, 0, 0, 0, 0, 0 }, +}; + +static struct of_device_id of_addr_decoding_controller_table[] = { + { .compatible = "marvell,armada-addr-decoding-controller" }, + { /* end of list */ }, +}; + +static void __iomem * +armada_cfg_base(const struct orion_addr_map_cfg *cfg, int win) +{ + unsigned int offset; + + /* The register layout is a bit annoying and the below code + * tries to cope with it. + * - At offset 0x0, there are the registers for the first 8 + * windows, with 4 registers of 32 bits per window (ctrl, + * base, remap low, remap high) + * - Then at offset 0x80, there is a hole of 0x10 bytes for + * the internal registers base address and internal units + * sync barrier register. + * - Then at offset 0x90, there the registers for 12 + * windows, with only 2 registers of 32 bits per window + * (ctrl, base). + */ + if (win < 8) + offset = (win << 4); + else + offset = ARMADA_WINDOW_8_PLUS_OFFSET + (win << 3); + + return cfg->bridge_virt_base + offset; +} + +static struct __initdata orion_addr_map_cfg addr_map_cfg = { + .num_wins = 20, + .remappable_wins = 8, + .win_cfg_base = armada_cfg_base, +}; + +static int __init armada_setup_cpu_mbus(void) +{ + struct device_node *np; + void __iomem *mbus_unit_addr_decoding_base; + void __iomem *sdram_addr_decoding_base; + + np = of_find_matching_node(NULL, of_addr_decoding_controller_table); + if (!np) + return -ENODEV; + + mbus_unit_addr_decoding_base = of_iomap(np, 0); + BUG_ON(!mbus_unit_addr_decoding_base); + + sdram_addr_decoding_base = + mbus_unit_addr_decoding_base + + ARMADA_SDRAM_ADDR_DECODING_OFFSET; + + addr_map_cfg.bridge_virt_base = mbus_unit_addr_decoding_base; + + /* + * Disable, clear and configure windows. + */ + if (of_machine_is_compatible("marvell,armadaxp")) + orion_config_wins(&addr_map_cfg, armada_xp_addr_map_info); + else if (of_machine_is_compatible("marvell,armada370")) + orion_config_wins(&addr_map_cfg, armada_370_addr_map_info); + else { + pr_err("Unsupported SoC\n"); + return -EINVAL; + } + + /* + * Setup MBUS dram target info. + */ + orion_setup_cpu_mbus_target(&addr_map_cfg, + sdram_addr_decoding_base); + return 0; +} + +/* Using a early_initcall is needed so that this initialization gets + * done before the SMP initialization, which requires the BootROM to + * be remapped. */ +early_initcall(armada_setup_cpu_mbus); diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c index b46418a8b352..49d791548ad6 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.c +++ b/arch/arm/mach-mvebu/armada-370-xp.c @@ -25,7 +25,7 @@ static struct map_desc armada_370_xp_io_desc[] __initdata = { { - .virtual = ARMADA_370_XP_REGS_VIRT_BASE, + .virtual = (unsigned long) ARMADA_370_XP_REGS_VIRT_BASE, .pfn = __phys_to_pfn(ARMADA_370_XP_REGS_PHYS_BASE), .length = ARMADA_370_XP_REGS_SIZE, .type = MT_DEVICE, diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h index 25f0ca8d7820..aac9bebc6b03 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.h +++ b/arch/arm/mach-mvebu/armada-370-xp.h @@ -16,7 +16,7 @@ #define __MACH_ARMADA_370_XP_H #define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000 -#define ARMADA_370_XP_REGS_VIRT_BASE 0xfeb00000 +#define ARMADA_370_XP_REGS_VIRT_BASE IOMEM(0xfeb00000) #define ARMADA_370_XP_REGS_SIZE SZ_1M #endif /* __MACH_ARMADA_370_XP_H */ diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index eaac83d1df6f..b5efc0fd31cb 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -113,7 +113,8 @@ void __init orion5x_setup_cpu_mbus_bridge(void) /* * Setup MBUS dram target info. */ - orion_setup_cpu_mbus_target(&addr_map_cfg, ORION5X_DDR_WINDOW_CPU_BASE); + orion_setup_cpu_mbus_target(&addr_map_cfg, + (void __iomem *) ORION5X_DDR_WINDOW_CPU_BASE); } void __init orion5x_setup_dev_boot_win(u32 base, u32 size) diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 5387fdfcaf3f..3e07f52f2127 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -42,12 +42,12 @@ ****************************************************************************/ static struct map_desc orion5x_io_desc[] __initdata = { { - .virtual = ORION5X_REGS_VIRT_BASE, + .virtual = (unsigned long) ORION5X_REGS_VIRT_BASE, .pfn = __phys_to_pfn(ORION5X_REGS_PHYS_BASE), .length = ORION5X_REGS_SIZE, .type = MT_DEVICE, }, { - .virtual = ORION5X_PCIE_WA_VIRT_BASE, + .virtual = (unsigned long) ORION5X_PCIE_WA_VIRT_BASE, .pfn = __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE), .length = ORION5X_PCIE_WA_SIZE, .type = MT_DEVICE, diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 0e19db69f5c4..e533588880ff 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -701,7 +701,7 @@ static void __init dns323_init(void) * Note: AFAIK, rev B1 needs the same treatement but I'll let * somebody else test it. */ - writel(0x5, ORION5X_SATA_VIRT_BASE | 0x2c); + writel(0x5, ORION5X_SATA_VIRT_BASE + 0x2c); break; } } diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h index 11a3c1e9801f..461fd69a10ae 100644 --- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h +++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h @@ -13,27 +13,27 @@ #include <mach/orion5x.h> -#define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE | 0x100) +#define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE + 0x100) -#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE | 0x104) +#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE + 0x104) -#define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108) +#define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE + 0x108) #define WDT_RESET_OUT_EN 0x0002 -#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c) +#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE + 0x10c) -#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x110) +#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE + 0x110) -#define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE | 0x11C) +#define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE + 0x11C) #define WDT_INT_REQ 0x0008 #define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x200) +#define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE + 0x200) -#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204) +#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE + 0x204) -#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) -#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE | 0x300) +#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE + 0x300) +#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE + 0x300) #endif diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index 1b60131b7f60..d265f5484a8e 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -37,7 +37,7 @@ * fd000000 f0000000 16M PCIe WA space (Orion-1/Orion-NAS only) ****************************************************************************/ #define ORION5X_REGS_PHYS_BASE 0xf1000000 -#define ORION5X_REGS_VIRT_BASE 0xfe000000 +#define ORION5X_REGS_VIRT_BASE IOMEM(0xfe000000) #define ORION5X_REGS_SIZE SZ_1M #define ORION5X_PCIE_IO_PHYS_BASE 0xf2000000 @@ -53,7 +53,7 @@ /* Relevant only for Orion-1/Orion-NAS */ #define ORION5X_PCIE_WA_PHYS_BASE 0xf0000000 -#define ORION5X_PCIE_WA_VIRT_BASE 0xfd000000 +#define ORION5X_PCIE_WA_VIRT_BASE IOMEM(0xfd000000) #define ORION5X_PCIE_WA_SIZE SZ_16M #define ORION5X_PCIE_MEM_PHYS_BASE 0xe0000000 @@ -66,42 +66,42 @@ * Orion Registers Map ******************************************************************************/ -#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000) -#define ORION5X_DDR_WINDOW_CPU_BASE (ORION5X_DDR_VIRT_BASE | 0x1500) -#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000) -#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000) -#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE | (x)) +#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x00000) +#define ORION5X_DDR_WINDOW_CPU_BASE (ORION5X_DDR_VIRT_BASE + 0x1500) +#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x10000) +#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x10000) +#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE + (x)) #define GPIO_VIRT_BASE ORION5X_DEV_BUS_REG(0x0100) -#define SPI_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x0600) -#define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x1000) -#define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2000) -#define UART0_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2000) -#define UART1_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2100) -#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100) +#define SPI_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x0600) +#define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x1000) +#define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x2000) +#define UART0_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE + 0x2000) +#define UART1_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x2100) +#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE + 0x2100) -#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000) -#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x20000) +#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x20000) +#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x20000) -#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000) +#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x30000) -#define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x40000) +#define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x40000) -#define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x50000) -#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000) +#define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x50000) +#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x50000) -#define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x60900) -#define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x60900) +#define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x60900) +#define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x60900) -#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000) -#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000) +#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x70000) +#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x70000) -#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000) -#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000) +#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x80000) +#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x80000) -#define ORION5X_CRYPTO_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x90000) +#define ORION5X_CRYPTO_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x90000) -#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000) -#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000) +#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0xa0000) +#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0xa0000) /******************************************************************************* * Device Bus Registers diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index e152641cdb0e..30a192b9c517 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -12,6 +12,7 @@ #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/irq.h> +#include <linux/io.h> #include <mach/bridge-regs.h> #include <plat/orion-gpio.h> #include <plat/irq.h> @@ -25,11 +26,11 @@ static int __initdata gpio0_irqs[4] = { void __init orion5x_init_irq(void) { - orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK); + orion_irq_init(0, MAIN_IRQ_MASK); /* * Initialize gpiolib for GPIOs 0-31. */ - orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE, 0, + orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE, 0, IRQ_ORION5X_GPIO_START, gpio0_irqs); } diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index 6921d49b988d..cd50e328db2a 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -38,7 +38,7 @@ /***************************************************************************** * PCIe controller ****************************************************************************/ -#define PCIE_BASE ((void __iomem *)ORION5X_PCIE_VIRT_BASE) +#define PCIE_BASE (ORION5X_PCIE_VIRT_BASE) void __init orion5x_pcie_id(u32 *dev, u32 *rev) { @@ -111,7 +111,7 @@ static int pcie_rd_conf_wa(struct pci_bus *bus, u32 devfn, return PCIBIOS_DEVICE_NOT_FOUND; } - ret = orion_pcie_rd_conf_wa((void __iomem *)ORION5X_PCIE_WA_VIRT_BASE, + ret = orion_pcie_rd_conf_wa(ORION5X_PCIE_WA_VIRT_BASE, bus, devfn, where, size, val); return ret; @@ -188,7 +188,7 @@ static int __init pcie_setup(struct pci_sys_data *sys) /***************************************************************************** * PCI controller ****************************************************************************/ -#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x)) +#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE + (x)) #define PCI_MODE ORION5X_PCI_REG(0xd00) #define PCI_CMD ORION5X_PCI_REG(0xc00) #define PCI_P2P_CONF ORION5X_PCI_REG(0x1d14) diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile index c20ce0f5ce33..1251e5bd41c5 100644 --- a/arch/arm/plat-orion/Makefile +++ b/arch/arm/plat-orion/Makefile @@ -2,9 +2,8 @@ # Makefile for the linux kernel. # -obj-y := irq.o pcie.o time.o common.o mpp.o addr-map.o -obj-m := -obj-n := -obj- := +obj-y += addr-map.o -obj-$(CONFIG_GENERIC_GPIO) += gpio.o +orion-gpio-$(CONFIG_GENERIC_GPIO) += gpio.o +obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o time.o common.o mpp.o +obj-$(CONFIG_PLAT_ORION_LEGACY) += $(orion-gpio-y) diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c index 367ca89ac403..a7b8060c293a 100644 --- a/arch/arm/plat-orion/addr-map.c +++ b/arch/arm/plat-orion/addr-map.c @@ -48,7 +48,7 @@ EXPORT_SYMBOL_GPL(mv_mbus_dram_info); static void __init __iomem * orion_win_cfg_base(const struct orion_addr_map_cfg *cfg, int win) { - return (void __iomem *)(cfg->bridge_virt_base + (win << 4)); + return cfg->bridge_virt_base + (win << 4); } /* @@ -143,19 +143,16 @@ void __init orion_config_wins(struct orion_addr_map_cfg * cfg, * Setup MBUS dram target info. */ void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg, - const u32 ddr_window_cpu_base) + const void __iomem *ddr_window_cpu_base) { - void __iomem *addr; int i; int cs; orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; - addr = (void __iomem *)ddr_window_cpu_base; - for (i = 0, cs = 0; i < 4; i++) { - u32 base = readl(addr + DDR_BASE_CS_OFF(i)); - u32 size = readl(addr + DDR_SIZE_CS_OFF(i)); + u32 base = readl(ddr_window_cpu_base + DDR_BASE_CS_OFF(i)); + u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i)); /* * Chip select enabled? diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 87f53caef655..b8a688cad4c2 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -86,13 +86,13 @@ static void __init uart_complete( struct platform_device *orion_uart, struct plat_serial8250_port *data, struct resource *resources, - unsigned int membase, + void __iomem *membase, resource_size_t mapbase, unsigned int irq, struct clk *clk) { data->mapbase = mapbase; - data->membase = (void __iomem *)membase; + data->membase = membase; data->irq = irq; data->uartclk = uart_get_clk_rate(clk); orion_uart->dev.platform_data = data; @@ -120,7 +120,7 @@ static struct platform_device orion_uart0 = { .id = PLAT8250_DEV_PLATFORM, }; -void __init orion_uart0_init(unsigned int membase, +void __init orion_uart0_init(void __iomem *membase, resource_size_t mapbase, unsigned int irq, struct clk *clk) @@ -148,7 +148,7 @@ static struct platform_device orion_uart1 = { .id = PLAT8250_DEV_PLATFORM1, }; -void __init orion_uart1_init(unsigned int membase, +void __init orion_uart1_init(void __iomem *membase, resource_size_t mapbase, unsigned int irq, struct clk *clk) @@ -176,7 +176,7 @@ static struct platform_device orion_uart2 = { .id = PLAT8250_DEV_PLATFORM2, }; -void __init orion_uart2_init(unsigned int membase, +void __init orion_uart2_init(void __iomem *membase, resource_size_t mapbase, unsigned int irq, struct clk *clk) @@ -204,7 +204,7 @@ static struct platform_device orion_uart3 = { .id = 3, }; -void __init orion_uart3_init(unsigned int membase, +void __init orion_uart3_init(void __iomem *membase, resource_size_t mapbase, unsigned int irq, struct clk *clk) diff --git a/arch/arm/plat-orion/include/plat/addr-map.h b/arch/arm/plat-orion/include/plat/addr-map.h index fd556f77562c..ec63e4a627d0 100644 --- a/arch/arm/plat-orion/include/plat/addr-map.h +++ b/arch/arm/plat-orion/include/plat/addr-map.h @@ -16,7 +16,7 @@ extern struct mbus_dram_target_info orion_mbus_dram_info; struct orion_addr_map_cfg { const int num_wins; /* Total number of windows */ const int remappable_wins; - const u32 bridge_virt_base; + void __iomem *bridge_virt_base; /* If NULL, the default cpu_win_can_remap will be used, using the value in remappable_wins */ @@ -49,5 +49,5 @@ void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg, const u8 attr, const int remap); void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg, - const u32 ddr_window_cpu_base); + const void __iomem *ddr_window_cpu_base); #endif diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index ae2377ef63e5..6bbc3fe5f58e 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -13,22 +13,22 @@ struct dsa_platform_data; -void __init orion_uart0_init(unsigned int membase, +void __init orion_uart0_init(void __iomem *membase, resource_size_t mapbase, unsigned int irq, struct clk *clk); -void __init orion_uart1_init(unsigned int membase, +void __init orion_uart1_init(void __iomem *membase, resource_size_t mapbase, unsigned int irq, struct clk *clk); -void __init orion_uart2_init(unsigned int membase, +void __init orion_uart2_init(void __iomem *membase, resource_size_t mapbase, unsigned int irq, struct clk *clk); -void __init orion_uart3_init(unsigned int membase, +void __init orion_uart3_init(void __iomem *membase, resource_size_t mapbase, unsigned int irq, struct clk *clk); diff --git a/arch/arm/plat-orion/include/plat/mpp.h b/arch/arm/plat-orion/include/plat/mpp.h index 723adce99f41..254552fee889 100644 --- a/arch/arm/plat-orion/include/plat/mpp.h +++ b/arch/arm/plat-orion/include/plat/mpp.h @@ -29,6 +29,6 @@ #define MPP_OUTPUT_MASK GENERIC_MPP(0, 0x0, 0, 1) void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask, - unsigned int mpp_max, unsigned int dev_bus); + unsigned int mpp_max, void __iomem *dev_bus); #endif diff --git a/arch/arm/plat-orion/include/plat/time.h b/arch/arm/plat-orion/include/plat/time.h index 4d5f1f6e18df..07527e417c62 100644 --- a/arch/arm/plat-orion/include/plat/time.h +++ b/arch/arm/plat-orion/include/plat/time.h @@ -11,9 +11,9 @@ #ifndef __PLAT_TIME_H #define __PLAT_TIME_H -void orion_time_set_base(u32 timer_base); +void orion_time_set_base(void __iomem *timer_base); -void orion_time_init(u32 bridge_base, u32 bridge_timer1_clr_mask, +void orion_time_init(void __iomem *bridge_base, u32 bridge_timer1_clr_mask, unsigned int irq, unsigned int tclk); diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c index 7740bb31d662..e686fe76a96b 100644 --- a/arch/arm/plat-orion/mpp.c +++ b/arch/arm/plat-orion/mpp.c @@ -18,15 +18,15 @@ #include <plat/mpp.h> /* Address of the ith MPP control register */ -static __init unsigned long mpp_ctrl_addr(unsigned int i, - unsigned long dev_bus) +static __init void __iomem *mpp_ctrl_addr(unsigned int i, + void __iomem *dev_bus) { return dev_bus + (i) * 4; } void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask, - unsigned int mpp_max, unsigned int dev_bus) + unsigned int mpp_max, void __iomem *dev_bus) { unsigned int mpp_nr_regs = (1 + mpp_max/8); u32 mpp_ctrl[mpp_nr_regs]; diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c index 1ed8d1397fcf..0f4fa863dd55 100644 --- a/arch/arm/plat-orion/time.c +++ b/arch/arm/plat-orion/time.c @@ -180,13 +180,13 @@ static struct irqaction orion_timer_irq = { }; void __init -orion_time_set_base(u32 _timer_base) +orion_time_set_base(void __iomem *_timer_base) { - timer_base = (void __iomem *)_timer_base; + timer_base = _timer_base; } void __init -orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask, +orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask, unsigned int irq, unsigned int tclk) { u32 u; @@ -194,7 +194,7 @@ orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask, /* * Set SoC-specific data. */ - bridge_base = (void __iomem *)_bridge_base; + bridge_base = _bridge_base; bridge_timer1_clr_mask = _bridge_timer1_clr_mask; ticks_per_jiffy = (tclk + HZ/2) / HZ; |