diff options
36 files changed, 249 insertions, 181 deletions
diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt index d5a308629c57..30b0581bb1ce 100644 --- a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt +++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt @@ -31,9 +31,8 @@ Optional nodes: Optional sub-node properties: ti,warm-reset - maintain voltage during warm reset(boolean) ti,roof-floor - control voltage selection by pin(boolean) - ti,sleep-mode - mode to adopt in pmic sleep 0 - off, 1 - auto, + ti,mode-sleep - mode to adopt in pmic sleep 0 - off, 1 - auto, 2 - eco, 3 - forced pwm - ti,tstep - slope control 0 - Jump, 1 10mV/us, 2 5mV/us, 3 2.5mV/us ti,smps-range - OTP has the wrong range set for the hardware so override 0 - low range, 1 - high range. @@ -59,7 +58,6 @@ pmic { ti,warm-reset; ti,roof-floor; ti,mode-sleep = <0>; - ti,tstep = <0>; ti,smps-range = <1>; }; diff --git a/MAINTAINERS b/MAINTAINERS index defc05383f83..97053182fcf1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -965,6 +965,12 @@ M: Lennert Buytenhek <kernel@wantstofly.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained +ARM/TEXAS INSTRUMENT KEYSTONE ARCHITECTURE +M: Santosh Shilimkar <santosh.shilimkar@ti.com> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/mach-keystone/ + ARM/LOGICPD PXA270 MACHINE SUPPORT M: Lennert Buytenhek <kernel@wantstofly.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -1259,7 +1265,6 @@ F: drivers/rtc/rtc-coh901331.c T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git ARM/Ux500 ARM ARCHITECTURE -M: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> M: Linus Walleij <linus.walleij@linaro.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts index db2060c46540..9c1167b0459b 100644 --- a/arch/arm/boot/dts/msm8960-cdp.dts +++ b/arch/arm/boot/dts/msm8960-cdp.dts @@ -26,7 +26,7 @@ cpu-offset = <0x80000>; }; - msmgpio: gpio@fd510000 { + msmgpio: gpio@800000 { compatible = "qcom,msm-gpio"; gpio-controller; #gpio-cells = <2>; @@ -34,7 +34,7 @@ interrupts = <0 32 0x4>; interrupt-controller; #interrupt-cells = <2>; - reg = <0xfd510000 0x4000>; + reg = <0x800000 0x4000>; }; serial@16440000 { diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 08b72678abff..65d7b601651c 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -235,7 +235,7 @@ }; &mmc1 { - vmmc-supply = <&vmmcsd_fixed>; + vmmc-supply = <&ldo9_reg>; bus-width = <4>; }; @@ -282,6 +282,7 @@ regulators { smps123_reg: smps123 { + /* VDD_OPP_MPU */ regulator-name = "smps123"; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1500000>; @@ -290,6 +291,7 @@ }; smps45_reg: smps45 { + /* VDD_OPP_MM */ regulator-name = "smps45"; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1310000>; @@ -298,6 +300,7 @@ }; smps6_reg: smps6 { + /* VDD_DDR3 - over VDD_SMPS6 */ regulator-name = "smps6"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -306,6 +309,7 @@ }; smps7_reg: smps7 { + /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */ regulator-name = "smps7"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -314,6 +318,7 @@ }; smps8_reg: smps8 { + /* VDD_OPP_CORE */ regulator-name = "smps8"; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1310000>; @@ -322,15 +327,15 @@ }; smps9_reg: smps9 { + /* VDDA_2v1_AUD over VDD_2v1 */ regulator-name = "smps9"; regulator-min-microvolt = <2100000>; regulator-max-microvolt = <2100000>; - regulator-always-on; - regulator-boot-on; ti,smps-range = <0x80>; }; smps10_reg: smps10 { + /* VBUS_5V_OTG */ regulator-name = "smps10"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -339,38 +344,40 @@ }; ldo1_reg: ldo1 { + /* VDDAPHY_CAM: vdda_csiport */ regulator-name = "ldo1"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; }; ldo2_reg: ldo2 { + /* VCC_2V8_DISP: Does not go anywhere */ regulator-name = "ldo2"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + /* Unused */ + status = "disabled"; }; ldo3_reg: ldo3 { + /* VDDAPHY_MDM: vdda_lli */ regulator-name = "ldo3"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; regulator-boot-on; + /* Only if Modem is used */ + status = "disabled"; }; ldo4_reg: ldo4 { + /* VDDAPHY_DISP: vdda_dsiport/hdmi */ regulator-name = "ldo4"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; }; ldo5_reg: ldo5 { + /* VDDA_1V8_PHY: usb/sata/hdmi.. */ regulator-name = "ldo5"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -379,38 +386,43 @@ }; ldo6_reg: ldo6 { + /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */ regulator-name = "ldo6"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; }; ldo7_reg: ldo7 { + /* VDD_VPP: vpp1 */ regulator-name = "ldo7"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + /* Only for efuse reprograming! */ + status = "disabled"; }; ldo8_reg: ldo8 { + /* VDD_3v0: Does not go anywhere */ regulator-name = "ldo8"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; regulator-boot-on; + /* Unused */ + status = "disabled"; }; ldo9_reg: ldo9 { + /* VCC_DV_SDIO: vdds_sdcard */ regulator-name = "ldo9"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; + regulator-max-microvolt = <3000000>; regulator-boot-on; }; ldoln_reg: ldoln { + /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */ regulator-name = "ldoln"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -419,12 +431,20 @@ }; ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ regulator-name = "ldousb"; regulator-min-microvolt = <3250000>; regulator-max-microvolt = <3250000>; regulator-always-on; regulator-boot-on; }; + + regen3_reg: regen3 { + /* REGEN3 controls LDO9 supply to card */ + regulator-name = "regen3"; + regulator-always-on; + regulator-boot-on; + }; }; }; }; diff --git a/arch/arm/boot/dts/stih41x.dtsi b/arch/arm/boot/dts/stih41x.dtsi index 7321403cab8a..f5b9898d9c6e 100644 --- a/arch/arm/boot/dts/stih41x.dtsi +++ b/arch/arm/boot/dts/stih41x.dtsi @@ -6,10 +6,12 @@ #address-cells = <1>; #size-cells = <0>; cpu@0 { + device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; }; cpu@1 { + device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; }; diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index 2fcb3f2ca160..5592be6f2f7a 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -457,6 +457,7 @@ }; usb-phy@c5004000 { + status = "okay"; nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 614e41e7881b..905efc8cac79 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -121,8 +121,7 @@ config MSM_SMD bool config MSM_GPIOMUX - depends on !(ARCH_MSM8X60 || ARCH_MSM8960) - bool "MSM V1 TLMM GPIOMUX architecture" + bool help Support for MSM V1 TLMM GPIOMUX architecture. diff --git a/arch/arm/mach-msm/gpiomux-v1.c b/arch/arm/mach-msm/gpiomux-v1.c deleted file mode 100644 index 27de2abd7144..000000000000 --- a/arch/arm/mach-msm/gpiomux-v1.c +++ /dev/null @@ -1,33 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ -#include <linux/kernel.h> -#include "gpiomux.h" -#include "proc_comm.h" - -void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val) -{ - unsigned tlmm_config = (val & ~GPIOMUX_CTL_MASK) | - ((gpio & 0x3ff) << 4); - unsigned tlmm_disable = 0; - int rc; - - rc = msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, - &tlmm_config, &tlmm_disable); - if (rc) - pr_err("%s: unexpected proc_comm failure %d: %08x %08x\n", - __func__, rc, tlmm_config, tlmm_disable); -} diff --git a/arch/arm/mach-msm/gpiomux.h b/arch/arm/mach-msm/gpiomux.h index 8e82f41a8923..4410d7766f93 100644 --- a/arch/arm/mach-msm/gpiomux.h +++ b/arch/arm/mach-msm/gpiomux.h @@ -73,16 +73,6 @@ extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS]; int msm_gpiomux_write(unsigned gpio, gpiomux_config_t active, gpiomux_config_t suspended); - -/* Architecture-internal function for use by the framework only. - * This function can assume the following: - * - the gpio value has passed a bounds-check - * - the gpiomux spinlock has been obtained - * - * This function is not for public consumption. External users - * should use msm_gpiomux_write. - */ -void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val); #else static inline int msm_gpiomux_write(unsigned gpio, gpiomux_config_t active, diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 5cc92874be7e..f99f68e1e85b 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -129,6 +129,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev) struct device_node *node = pdev->dev.of_node; const char *oh_name; int oh_cnt, i, ret = 0; + bool device_active = false; oh_cnt = of_property_count_strings(node, "ti,hwmods"); if (oh_cnt <= 0) { @@ -152,6 +153,8 @@ static int omap_device_build_from_dt(struct platform_device *pdev) goto odbfd_exit1; } hwmods[i] = oh; + if (oh->flags & HWMOD_INIT_NO_IDLE) + device_active = true; } od = omap_device_alloc(pdev, hwmods, oh_cnt); @@ -172,6 +175,11 @@ static int omap_device_build_from_dt(struct platform_device *pdev) pdev->dev.pm_domain = &omap_device_pm_domain; + if (device_active) { + omap_device_enable(pdev); + pm_runtime_set_active(&pdev->dev); + } + odbfd_exit1: kfree(hwmods); odbfd_exit: @@ -842,6 +850,7 @@ static int __init omap_device_late_idle(struct device *dev, void *data) { struct platform_device *pdev = to_platform_device(dev); struct omap_device *od = to_omap_device(pdev); + int i; if (!od) return 0; @@ -850,6 +859,15 @@ static int __init omap_device_late_idle(struct device *dev, void *data) * If omap_device state is enabled, but has no driver bound, * idle it. */ + + /* + * Some devices (like memory controllers) are always kept + * enabled, and should not be idled even with no drivers. + */ + for (i = 0; i < od->hwmods_cnt; i++) + if (od->hwmods[i]->flags & HWMOD_INIT_NO_IDLE) + return 0; + if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) { if (od->_state == OMAP_DEVICE_STATE_ENABLED) { dev_warn(dev, "%s: enabled but no driver. Idling\n", diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 7341eff63f56..7f4db12b1459 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2386,7 +2386,7 @@ static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data) np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh); if (np) - va_start = of_iomap(np, 0); + va_start = of_iomap(np, oh->mpu_rt_idx); } else { va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); } diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index aab33fd814c0..e1482a9b3bc2 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -95,6 +95,54 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3; #define MODULEMODE_HWCTRL 1 #define MODULEMODE_SWCTRL 2 +#define DEBUG_OMAP2UART1_FLAGS 0 +#define DEBUG_OMAP2UART2_FLAGS 0 +#define DEBUG_OMAP2UART3_FLAGS 0 +#define DEBUG_OMAP3UART3_FLAGS 0 +#define DEBUG_OMAP3UART4_FLAGS 0 +#define DEBUG_OMAP4UART3_FLAGS 0 +#define DEBUG_OMAP4UART4_FLAGS 0 +#define DEBUG_TI81XXUART1_FLAGS 0 +#define DEBUG_TI81XXUART2_FLAGS 0 +#define DEBUG_TI81XXUART3_FLAGS 0 +#define DEBUG_AM33XXUART1_FLAGS 0 + +#define DEBUG_OMAPUART_FLAGS (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET) + +#if defined(CONFIG_DEBUG_OMAP2UART1) +#undef DEBUG_OMAP2UART1_FLAGS +#define DEBUG_OMAP2UART1_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP2UART2) +#undef DEBUG_OMAP2UART2_FLAGS +#define DEBUG_OMAP2UART2_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP2UART3) +#undef DEBUG_OMAP2UART3_FLAGS +#define DEBUG_OMAP2UART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP3UART3) +#undef DEBUG_OMAP3UART3_FLAGS +#define DEBUG_OMAP3UART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP3UART4) +#undef DEBUG_OMAP3UART4_FLAGS +#define DEBUG_OMAP3UART4_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP4UART3) +#undef DEBUG_OMAP4UART3_FLAGS +#define DEBUG_OMAP4UART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP4UART4) +#undef DEBUG_OMAP4UART4_FLAGS +#define DEBUG_OMAP4UART4_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_TI81XXUART1) +#undef DEBUG_TI81XXUART1_FLAGS +#define DEBUG_TI81XXUART1_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_TI81XXUART2) +#undef DEBUG_TI81XXUART2_FLAGS +#define DEBUG_TI81XXUART2_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_TI81XXUART3) +#undef DEBUG_TI81XXUART3_FLAGS +#define DEBUG_TI81XXUART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_AM33XXUART1) +#undef DEBUG_AM33XXUART1_FLAGS +#define DEBUG_AM33XXUART1_FLAGS DEBUG_OMAPUART_FLAGS +#endif /** * struct omap_hwmod_mux_info - hwmod specific mux configuration @@ -568,6 +616,7 @@ struct omap_hwmod_link { * @voltdm: pointer to voltage domain (filled in at runtime) * @dev_attr: arbitrary device attributes that can be passed to the driver * @_sysc_cache: internal-use hwmod flags + * @mpu_rt_idx: index of device address space for register target (for DT boot) * @_mpu_rt_va: cached register target start address (internal use) * @_mpu_port: cached MPU register target slave (internal use) * @opt_clks_cnt: number of @opt_clks @@ -617,6 +666,7 @@ struct omap_hwmod { struct list_head node; struct omap_hwmod_ocp_if *_mpu_port; u16 flags; + u8 mpu_rt_idx; u8 response_lat; u8 rst_lines_cnt; u8 opt_clks_cnt; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index d05fc7b54567..56cebb05509e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -512,7 +512,7 @@ struct omap_hwmod omap2xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP2UART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -532,7 +532,7 @@ struct omap_hwmod omap2xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP2UART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -552,7 +552,7 @@ struct omap_hwmod omap2xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP2UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 28bbd56346a9..eb2f3b93b51c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -562,6 +562,7 @@ static struct omap_hwmod am33xx_cpgmac0_hwmod = { .clkdm_name = "cpsw_125mhz_clkdm", .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY), .main_clk = "cpsw_125mhz_gclk", + .mpu_rt_idx = 1, .prcm = { .omap4 = { .clkctrl_offs = AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET, @@ -1512,7 +1513,7 @@ static struct omap_hwmod am33xx_uart1_hwmod = { .name = "uart1", .class = &uart_class, .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_AM33XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "dpll_per_m2_div4_wkupdm_ck", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index f7a3df2fb579..0c3a427da544 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -490,7 +490,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_TI81XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -509,7 +509,7 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_TI81XXUART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -528,7 +528,8 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP3UART3_FLAGS | DEBUG_TI81XXUART3_FLAGS | + HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, @@ -558,7 +559,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { .mpu_irqs = uart4_mpu_irqs, .sdma_reqs = uart4_sdma_reqs, .main_clk = "uart4_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP3UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index d04b5e60fdbe..9c3b504477d7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2858,8 +2858,7 @@ static struct omap_hwmod omap44xx_uart3_hwmod = { .name = "uart3", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | - HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP4UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { @@ -2875,7 +2874,7 @@ static struct omap_hwmod omap44xx_uart4_hwmod = { .name = "uart4", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP4UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index f37ae96b70a1..3c70f5c1860f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -1375,7 +1375,7 @@ static struct omap_hwmod omap54xx_uart3_hwmod = { .name = "uart3", .class = &omap54xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .flags = DEBUG_OMAP4UART3_FLAGS, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { @@ -1391,6 +1391,7 @@ static struct omap_hwmod omap54xx_uart4_hwmod = { .name = "uart4", .class = &omap54xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", + .flags = DEBUG_OMAP4UART4_FLAGS, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 3a674de6cb63..a388f8c1bcb3 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -208,17 +208,6 @@ static int __init omap_serial_early_init(void) pr_info("%s used as console in debug mode: uart%d clocks will not be gated", uart_name, uart->num); } - - /* - * omap-uart can be used for earlyprintk logs - * So if omap-uart is used as console then prevent - * uart reset and idle to get logs from omap-uart - * until uart console driver is available to take - * care for console messages. - * Idling or resetting omap-uart while printing logs - * early boot logs can stall the boot-up. - */ - oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET; } } while (1); diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index e115f6742107..c5be60d85e4b 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -1162,9 +1162,6 @@ static void __init eva_init(void) gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ gpio_request_one(202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */ - /* Touchscreen */ - gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */ - /* GETHER */ gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */ diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index d5554646916c..3354a85c90f7 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -167,7 +167,13 @@ static const struct pinctrl_map bockw_pinctrl_map[] = { "usb1", "usb1"), /* SDHI0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", - "sdhi0", "sdhi0"), + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", + "sdhi0_cd", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", + "sdhi0_wp", "sdhi0"), }; #define FPGA 0x18200000 diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index d73e21d3ea8a..8d6bd5c5efb9 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -59,7 +59,7 @@ static __initdata struct gpio_led_platform_data lager_leds_pdata = { #define GPIO_KEY(c, g, d, ...) \ { .code = c, .gpio = g, .desc = d, .active_low = 1 } -static __initdata struct gpio_keys_button gpio_buttons[] = { +static struct gpio_keys_button gpio_buttons[] = { GPIO_KEY(KEY_4, RCAR_GP_PIN(1, 28), "SW2-pin4"), GPIO_KEY(KEY_3, RCAR_GP_PIN(1, 26), "SW2-pin3"), GPIO_KEY(KEY_2, RCAR_GP_PIN(1, 24), "SW2-pin2"), diff --git a/arch/arm/mach-sti/headsmp.S b/arch/arm/mach-sti/headsmp.S index 78ebc7559f53..4c09bae86edf 100644 --- a/arch/arm/mach-sti/headsmp.S +++ b/arch/arm/mach-sti/headsmp.S @@ -16,8 +16,6 @@ #include <linux/linkage.h> #include <linux/init.h> - __INIT - /* * ST specific entry point for secondary CPUs. This provides * a "holding pen" into which all secondary cores are held until we're diff --git a/drivers/base/regmap/regcache.c b/drivers/base/regmap/regcache.c index e69102696533..3455f833e473 100644 --- a/drivers/base/regmap/regcache.c +++ b/drivers/base/regmap/regcache.c @@ -719,7 +719,8 @@ static int regcache_sync_block_raw(struct regmap *map, void *block, } } - return regcache_sync_block_raw_flush(map, &data, base, regtmp); + return regcache_sync_block_raw_flush(map, &data, base, regtmp + + map->reg_stride); } int regcache_sync_block(struct regmap *map, void *block, diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index 1b456fe9b87a..fc45567ad3ac 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -272,9 +272,12 @@ static struct port *find_port_by_devt_in_portdev(struct ports_device *portdev, unsigned long flags; spin_lock_irqsave(&portdev->ports_lock, flags); - list_for_each_entry(port, &portdev->ports, list) - if (port->cdev->dev == dev) + list_for_each_entry(port, &portdev->ports, list) { + if (port->cdev->dev == dev) { + kref_get(&port->kref); goto out; + } + } port = NULL; out: spin_unlock_irqrestore(&portdev->ports_lock, flags); @@ -746,6 +749,10 @@ static ssize_t port_fops_read(struct file *filp, char __user *ubuf, port = filp->private_data; + /* Port is hot-unplugged. */ + if (!port->guest_connected) + return -ENODEV; + if (!port_has_data(port)) { /* * If nothing's connected on the host just return 0 in @@ -762,7 +769,7 @@ static ssize_t port_fops_read(struct file *filp, char __user *ubuf, if (ret < 0) return ret; } - /* Port got hot-unplugged. */ + /* Port got hot-unplugged while we were waiting above. */ if (!port->guest_connected) return -ENODEV; /* @@ -932,13 +939,25 @@ static ssize_t port_fops_splice_write(struct pipe_inode_info *pipe, if (is_rproc_serial(port->out_vq->vdev)) return -EINVAL; + /* + * pipe->nrbufs == 0 means there are no data to transfer, + * so this returns just 0 for no data. + */ + pipe_lock(pipe); + if (!pipe->nrbufs) { + ret = 0; + goto error_out; + } + ret = wait_port_writable(port, filp->f_flags & O_NONBLOCK); if (ret < 0) - return ret; + goto error_out; buf = alloc_buf(port->out_vq, 0, pipe->nrbufs); - if (!buf) - return -ENOMEM; + if (!buf) { + ret = -ENOMEM; + goto error_out; + } sgl.n = 0; sgl.len = 0; @@ -946,12 +965,17 @@ static ssize_t port_fops_splice_write(struct pipe_inode_info *pipe, sgl.sg = buf->sg; sg_init_table(sgl.sg, sgl.size); ret = __splice_from_pipe(pipe, &sd, pipe_to_sg); + pipe_unlock(pipe); if (likely(ret > 0)) ret = __send_to_port(port, buf->sg, sgl.n, sgl.len, buf, true); if (unlikely(ret <= 0)) free_buf(buf, true); return ret; + +error_out: + pipe_unlock(pipe); + return ret; } static unsigned int port_fops_poll(struct file *filp, poll_table *wait) @@ -1019,14 +1043,14 @@ static int port_fops_open(struct inode *inode, struct file *filp) struct port *port; int ret; + /* We get the port with a kref here */ port = find_port_by_devt(cdev->dev); + if (!port) { + /* Port was unplugged before we could proceed */ + return -ENXIO; + } filp->private_data = port; - /* Prevent against a port getting hot-unplugged at the same time */ - spin_lock_irq(&port->portdev->ports_lock); - kref_get(&port->kref); - spin_unlock_irq(&port->portdev->ports_lock); - /* * Don't allow opening of console port devices -- that's done * via /dev/hvc @@ -1498,14 +1522,6 @@ static void remove_port(struct kref *kref) port = container_of(kref, struct port, kref); - sysfs_remove_group(&port->dev->kobj, &port_attribute_group); - device_destroy(pdrvdata.class, port->dev->devt); - cdev_del(port->cdev); - - kfree(port->name); - - debugfs_remove(port->debugfs_file); - kfree(port); } @@ -1539,12 +1555,14 @@ static void unplug_port(struct port *port) spin_unlock_irq(&port->portdev->ports_lock); if (port->guest_connected) { + /* Let the app know the port is going down. */ + send_sigio_to_port(port); + + /* Do this after sigio is actually sent */ port->guest_connected = false; port->host_connected = false; - wake_up_interruptible(&port->waitqueue); - /* Let the app know the port is going down. */ - send_sigio_to_port(port); + wake_up_interruptible(&port->waitqueue); } if (is_console_port(port)) { @@ -1563,6 +1581,14 @@ static void unplug_port(struct port *port) */ port->portdev = NULL; + sysfs_remove_group(&port->dev->kobj, &port_attribute_group); + device_destroy(pdrvdata.class, port->dev->devt); + cdev_del(port->cdev); + + kfree(port->name); + + debugfs_remove(port->debugfs_file); + /* * Locks around here are not necessary - a port can't be * opened after we removed the port struct from ports_list diff --git a/drivers/dma/sh/shdma.c b/drivers/dma/sh/shdma.c index b67f45f5c271..5039fbc88254 100644 --- a/drivers/dma/sh/shdma.c +++ b/drivers/dma/sh/shdma.c @@ -400,8 +400,8 @@ static size_t sh_dmae_get_partial(struct shdma_chan *schan, shdma_chan); struct sh_dmae_desc *sh_desc = container_of(sdesc, struct sh_dmae_desc, shdma_desc); - return (sh_desc->hw.tcr - sh_dmae_readl(sh_chan, TCR)) << - sh_chan->xmit_shift; + return sh_desc->hw.tcr - + (sh_dmae_readl(sh_chan, TCR) << sh_chan->xmit_shift); } /* Called from error IRQ or NMI */ diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c index 2168258fb2c3..74b88efde6ad 100644 --- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -751,7 +751,7 @@ static void __virtscsi_set_affinity(struct virtio_scsi *vscsi, bool affinity) vscsi->affinity_hint_set = true; } else { - for (i = 0; i < vscsi->num_queues - VIRTIO_SCSI_VQ_BASE; i++) + for (i = 0; i < vscsi->num_queues; i++) virtqueue_set_affinity(vscsi->req_vqs[i].vq, -1); vscsi->affinity_hint_set = false; diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index 222d3e37fc28..707966bd5610 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -609,7 +609,7 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t) else buf = (void *)t->tx_buf; t->tx_dma = dma_map_single(&spi->dev, buf, - t->len, DMA_FROM_DEVICE); + t->len, DMA_TO_DEVICE); if (!t->tx_dma) { ret = -EFAULT; goto err_tx_map; diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index a61873808f76..72ba4705d4fa 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -4412,7 +4412,7 @@ void ext4_ext_truncate(handle_t *handle, struct inode *inode) retry: err = ext4_es_remove_extent(inode, last_block, EXT_MAX_BLOCKS - last_block); - if (err == ENOMEM) { + if (err == -ENOMEM) { cond_resched(); congestion_wait(BLK_RW_ASYNC, HZ/50); goto retry; diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index f03598c6ffd3..8bf5999875ee 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -734,11 +734,8 @@ repeat_in_this_group: ino = ext4_find_next_zero_bit((unsigned long *) inode_bitmap_bh->b_data, EXT4_INODES_PER_GROUP(sb), ino); - if (ino >= EXT4_INODES_PER_GROUP(sb)) { - if (++group == ngroups) - group = 0; - continue; - } + if (ino >= EXT4_INODES_PER_GROUP(sb)) + goto next_group; if (group == 0 && (ino+1) < EXT4_FIRST_INO(sb)) { ext4_error(sb, "reserved inode found cleared - " "inode=%lu", ino + 1); @@ -769,6 +766,9 @@ repeat_in_this_group: goto got; /* we grabbed the inode! */ if (ino < EXT4_INODES_PER_GROUP(sb)) goto repeat_in_this_group; +next_group: + if (++group == ngroups) + group = 0; } err = -ENOSPC; goto out; diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index ba33c67d6e48..dd32a2eacd0d 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -555,14 +555,13 @@ int ext4_map_blocks(handle_t *handle, struct inode *inode, int ret; unsigned long long status; -#ifdef ES_AGGRESSIVE_TEST - if (retval != map->m_len) { - printk("ES len assertion failed for inode: %lu " - "retval %d != map->m_len %d " - "in %s (lookup)\n", inode->i_ino, retval, - map->m_len, __func__); + if (unlikely(retval != map->m_len)) { + ext4_warning(inode->i_sb, + "ES len assertion failed for inode " + "%lu: retval %d != map->m_len %d", + inode->i_ino, retval, map->m_len); + WARN_ON(1); } -#endif status = map->m_flags & EXT4_MAP_UNWRITTEN ? EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN; @@ -656,14 +655,13 @@ found: int ret; unsigned long long status; -#ifdef ES_AGGRESSIVE_TEST - if (retval != map->m_len) { - printk("ES len assertion failed for inode: %lu " - "retval %d != map->m_len %d " - "in %s (allocation)\n", inode->i_ino, retval, - map->m_len, __func__); + if (unlikely(retval != map->m_len)) { + ext4_warning(inode->i_sb, + "ES len assertion failed for inode " + "%lu: retval %d != map->m_len %d", + inode->i_ino, retval, map->m_len); + WARN_ON(1); } -#endif /* * If the extent has been zeroed out, we don't need to update @@ -1637,14 +1635,13 @@ add_delayed: int ret; unsigned long long status; -#ifdef ES_AGGRESSIVE_TEST - if (retval != map->m_len) { - printk("ES len assertion failed for inode: %lu " - "retval %d != map->m_len %d " - "in %s (lookup)\n", inode->i_ino, retval, - map->m_len, __func__); + if (unlikely(retval != map->m_len)) { + ext4_warning(inode->i_sb, + "ES len assertion failed for inode " + "%lu: retval %d != map->m_len %d", + inode->i_ino, retval, map->m_len); + WARN_ON(1); } -#endif status = map->m_flags & EXT4_MAP_UNWRITTEN ? EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN; diff --git a/fs/ext4/super.c b/fs/ext4/super.c index bca26f34edf4..36b141e420b7 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -5481,6 +5481,7 @@ static void __exit ext4_exit_fs(void) kset_unregister(ext4_kset); ext4_exit_system_zone(); ext4_exit_pageio(); + ext4_exit_es(); } MODULE_AUTHOR("Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others"); diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 75981d0b57dc..580a5320cc96 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -15,6 +15,7 @@ #include <linux/list.h> #include <linux/rbtree.h> +#include <linux/err.h> struct module; struct device; diff --git a/include/linux/user_namespace.h b/include/linux/user_namespace.h index b6b215f13b45..14105c26a836 100644 --- a/include/linux/user_namespace.h +++ b/include/linux/user_namespace.h @@ -23,6 +23,7 @@ struct user_namespace { struct uid_gid_map projid_map; atomic_t count; struct user_namespace *parent; + int level; kuid_t owner; kgid_t group; unsigned int proc_inum; diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c index 6e50a44610ee..9064b919a406 100644 --- a/kernel/user_namespace.c +++ b/kernel/user_namespace.c @@ -62,6 +62,9 @@ int create_user_ns(struct cred *new) kgid_t group = new->egid; int ret; + if (parent_ns->level > 32) + return -EUSERS; + /* * Verify that we can not violate the policy of which files * may be accessed that is specified by the root directory, @@ -92,6 +95,7 @@ int create_user_ns(struct cred *new) atomic_set(&ns->count, 1); /* Leave the new->user_ns reference with the new user namespace. */ ns->parent = parent_ns; + ns->level = parent_ns->level + 1; ns->owner = owner; ns->group = group; diff --git a/mm/slub.c b/mm/slub.c index 2b02d666bf63..e3ba1f2cf60c 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -1968,9 +1968,6 @@ static void put_cpu_partial(struct kmem_cache *s, struct page *page, int drain) int pages; int pobjects; - if (!s->cpu_partial) - return; - do { pages = 0; pobjects = 0; diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index 3f7682a387b7..eefbd10e408f 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -1998,12 +1998,11 @@ static void smk_ipv6_port_label(struct socket *sock, struct sockaddr *address) * * Create or update the port list entry */ -static int smk_ipv6_port_check(struct sock *sk, struct sockaddr *address, +static int smk_ipv6_port_check(struct sock *sk, struct sockaddr_in6 *address, int act) { __be16 *bep; __be32 *be32p; - struct sockaddr_in6 *addr6; struct smk_port_label *spp; struct socket_smack *ssp = sk->sk_security; struct smack_known *skp; @@ -2025,10 +2024,9 @@ static int smk_ipv6_port_check(struct sock *sk, struct sockaddr *address, /* * Get the IP address and port from the address. */ - addr6 = (struct sockaddr_in6 *)address; - port = ntohs(addr6->sin6_port); - bep = (__be16 *)(&addr6->sin6_addr); - be32p = (__be32 *)(&addr6->sin6_addr); + port = ntohs(address->sin6_port); + bep = (__be16 *)(&address->sin6_addr); + be32p = (__be32 *)(&address->sin6_addr); /* * It's remote, so port lookup does no good. @@ -2060,9 +2058,9 @@ auditout: ad.a.u.net->family = sk->sk_family; ad.a.u.net->dport = port; if (act == SMK_RECEIVING) - ad.a.u.net->v6info.saddr = addr6->sin6_addr; + ad.a.u.net->v6info.saddr = address->sin6_addr; else - ad.a.u.net->v6info.daddr = addr6->sin6_addr; + ad.a.u.net->v6info.daddr = address->sin6_addr; #endif return smk_access(skp, object, MAY_WRITE, &ad); } @@ -2201,7 +2199,8 @@ static int smack_socket_connect(struct socket *sock, struct sockaddr *sap, case PF_INET6: if (addrlen < sizeof(struct sockaddr_in6)) return -EINVAL; - rc = smk_ipv6_port_check(sock->sk, sap, SMK_CONNECTING); + rc = smk_ipv6_port_check(sock->sk, (struct sockaddr_in6 *)sap, + SMK_CONNECTING); break; } return rc; @@ -3034,7 +3033,7 @@ static int smack_socket_sendmsg(struct socket *sock, struct msghdr *msg, int size) { struct sockaddr_in *sip = (struct sockaddr_in *) msg->msg_name; - struct sockaddr *sap = (struct sockaddr *) msg->msg_name; + struct sockaddr_in6 *sap = (struct sockaddr_in6 *) msg->msg_name; int rc = 0; /* @@ -3121,9 +3120,8 @@ static struct smack_known *smack_from_secattr(struct netlbl_lsm_secattr *sap, return smack_net_ambient; } -static int smk_skb_to_addr_ipv6(struct sk_buff *skb, struct sockaddr *sap) +static int smk_skb_to_addr_ipv6(struct sk_buff *skb, struct sockaddr_in6 *sip) { - struct sockaddr_in6 *sip = (struct sockaddr_in6 *)sap; u8 nexthdr; int offset; int proto = -EINVAL; @@ -3181,7 +3179,7 @@ static int smack_socket_sock_rcv_skb(struct sock *sk, struct sk_buff *skb) struct netlbl_lsm_secattr secattr; struct socket_smack *ssp = sk->sk_security; struct smack_known *skp; - struct sockaddr sadd; + struct sockaddr_in6 sadd; int rc = 0; struct smk_audit_info ad; #ifdef CONFIG_AUDIT |