diff options
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/phy.c | 19 |
1 files changed, 14 insertions, 5 deletions
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 8b71a2d947e0..aa1a77d4cd90 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -3562,6 +3562,20 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, for (i = 8; i <= 15; i++) rates[i] -= ah->ah_txpower.txp_cck_ofdm_gainf_delta; + /* Save min/max and current tx power for this channel + * in 0.25dB units. + * + * Note: We use rates[0] for current tx power because + * it covers most of the rates, in most cases. It's our + * tx power limit and what the user expects to see. */ + ah->ah_txpower.txp_min_pwr = 2 * rates[7]; + ah->ah_txpower.txp_cur_pwr = 2 * rates[0]; + + /* Set max txpower for correct OFDM operation on all rates + * -that is the txpower for 54Mbit-, it's used for the PAPD + * gain probe and it's in 0.5dB units */ + ah->ah_txpower.txp_ofdm = rates[7]; + /* Now that we have all rates setup use table offset to * match the power range set by user with the power indices * on PCDAC/PDADC table */ @@ -3571,11 +3585,6 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, if (rates[i] > 63) rates[i] = 63; } - - /* Min/max in 0.25dB units */ - ah->ah_txpower.txp_min_pwr = 2 * rates[7]; - ah->ah_txpower.txp_cur_pwr = 2 * rates[0]; - ah->ah_txpower.txp_ofdm = rates[7]; } |