summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--include/net/cfg80211.h4
-rw-r--r--net/mac80211/cfg.c6
-rw-r--r--net/wireless/core.h7
-rw-r--r--net/wireless/mesh.c91
-rw-r--r--net/wireless/nl80211.c43
-rw-r--r--net/wireless/wext-compat.c12
6 files changed, 148 insertions, 15 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index a54fb895f613..4c90c44b8b75 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -831,6 +831,8 @@ struct mesh_config {
/**
* struct mesh_setup - 802.11s mesh setup configuration
+ * @channel: the channel to start the mesh network on
+ * @channel_type: the channel type to use
* @mesh_id: the mesh ID
* @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes
* @sync_method: which synchronization method to use
@@ -845,6 +847,8 @@ struct mesh_config {
* These parameters are fixed when the mesh is created.
*/
struct mesh_setup {
+ struct ieee80211_channel *channel;
+ enum nl80211_channel_type channel_type;
const u8 *mesh_id;
u8 mesh_id_len;
u8 sync_method;
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 8e9d525c4653..f47af8b3185e 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1598,6 +1598,12 @@ static int ieee80211_join_mesh(struct wiphy *wiphy, struct net_device *dev,
err = copy_mesh_setup(ifmsh, setup);
if (err)
return err;
+
+ err = ieee80211_set_channel(wiphy, dev, setup->channel,
+ setup->channel_type);
+ if (err)
+ return err;
+
ieee80211_start_mesh(sdata);
return 0;
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 8523f3878677..1d3d24126946 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -303,14 +303,17 @@ extern const struct mesh_config default_mesh_config;
extern const struct mesh_setup default_mesh_setup;
int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
struct net_device *dev,
- const struct mesh_setup *setup,
+ struct mesh_setup *setup,
const struct mesh_config *conf);
int cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
struct net_device *dev,
- const struct mesh_setup *setup,
+ struct mesh_setup *setup,
const struct mesh_config *conf);
int cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
struct net_device *dev);
+int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev, int freq,
+ enum nl80211_channel_type channel_type);
/* MLME */
int __cfg80211_mlme_auth(struct cfg80211_registered_device *rdev,
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
index 2749cb86b462..2e3b700eba32 100644
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -65,6 +65,9 @@ const struct mesh_config default_mesh_config = {
};
const struct mesh_setup default_mesh_setup = {
+ /* cfg80211_join_mesh() will pick a channel if needed */
+ .channel = NULL,
+ .channel_type = NL80211_CHAN_NO_HT,
.sync_method = IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET,
.path_sel_proto = IEEE80211_PATH_PROTOCOL_HWMP,
.path_metric = IEEE80211_PATH_METRIC_AIRTIME,
@@ -75,7 +78,7 @@ const struct mesh_setup default_mesh_setup = {
int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
struct net_device *dev,
- const struct mesh_setup *setup,
+ struct mesh_setup *setup,
const struct mesh_config *conf)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
@@ -101,6 +104,51 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
if (!rdev->ops->join_mesh)
return -EOPNOTSUPP;
+ if (!setup->channel) {
+ /* if no channel explicitly given, use preset channel */
+ setup->channel = wdev->preset_chan;
+ setup->channel_type = wdev->preset_chantype;
+ }
+
+ if (!setup->channel) {
+ /* if we don't have that either, use the first usable channel */
+ enum ieee80211_band band;
+
+ for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+ struct ieee80211_supported_band *sband;
+ struct ieee80211_channel *chan;
+ int i;
+
+ sband = rdev->wiphy.bands[band];
+ if (!sband)
+ continue;
+
+ for (i = 0; i < sband->n_channels; i++) {
+ chan = &sband->channels[i];
+ if (chan->flags & (IEEE80211_CHAN_NO_IBSS |
+ IEEE80211_CHAN_PASSIVE_SCAN |
+ IEEE80211_CHAN_DISABLED |
+ IEEE80211_CHAN_RADAR))
+ continue;
+ setup->channel = chan;
+ break;
+ }
+
+ if (setup->channel)
+ break;
+ }
+
+ /* no usable channel ... */
+ if (!setup->channel)
+ return -EINVAL;
+
+ setup->channel_type = NL80211_CHAN_NO_HT;
+ }
+
+ if (!cfg80211_can_beacon_sec_chan(&rdev->wiphy, setup->channel,
+ setup->channel_type))
+ return -EINVAL;
+
err = rdev->ops->join_mesh(&rdev->wiphy, dev, conf, setup);
if (!err) {
memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len);
@@ -112,7 +160,7 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
int cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
struct net_device *dev,
- const struct mesh_setup *setup,
+ struct mesh_setup *setup,
const struct mesh_config *conf)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
@@ -125,6 +173,45 @@ int cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
return err;
}
+int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev, int freq,
+ enum nl80211_channel_type channel_type)
+{
+ struct ieee80211_channel *channel;
+
+ /*
+ * Workaround for libertas (only!), it puts the interface
+ * into mesh mode but doesn't implement join_mesh. Instead,
+ * it is configured via sysfs and then joins the mesh when
+ * you set the channel. Note that the libertas mesh isn't
+ * compatible with 802.11 mesh.
+ */
+ if (!rdev->ops->join_mesh) {
+ int err;
+
+ if (!netif_running(wdev->netdev))
+ return -ENETDOWN;
+ wdev_lock(wdev);
+ err = cfg80211_set_freq(rdev, wdev, freq, channel_type);
+ wdev_unlock(wdev);
+
+ return err;
+ }
+
+ if (wdev->mesh_id_len)
+ return -EBUSY;
+
+ channel = rdev_freq_to_chan(rdev, freq, channel_type);
+ if (!channel || !cfg80211_can_beacon_sec_chan(&rdev->wiphy,
+ channel,
+ channel_type)) {
+ return -EINVAL;
+ }
+ wdev->preset_chan = channel;
+ wdev->preset_chantype = channel_type;
+ return 0;
+}
+
void cfg80211_notify_new_peer_candidate(struct net_device *dev,
const u8 *macaddr, const u8* ie, u8 ie_len, gfp_t gfp)
{
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 089a5204dad5..b22f1f876881 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -921,7 +921,8 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
if (nla_put_u32(msg, i, NL80211_CMD_SET_WIPHY_NETNS))
goto nla_put_failure;
}
- if (dev->ops->set_channel || dev->ops->start_ap) {
+ if (dev->ops->set_channel || dev->ops->start_ap ||
+ dev->ops->join_mesh) {
i++;
if (nla_put_u32(msg, i, NL80211_CMD_SET_CHANNEL))
goto nla_put_failure;
@@ -1166,17 +1167,19 @@ static int parse_txq_params(struct nlattr *tb[],
static bool nl80211_can_set_dev_channel(struct wireless_dev *wdev)
{
/*
- * You can only set the channel explicitly for AP and
- * mesh type interfaces; all others have their channel
- * managed via their respective "establish a connection"
- * command (connect, join, ...)
+ * You can only set the channel explicitly for WDS interfaces,
+ * all others have their channel managed via their respective
+ * "establish a connection" command (connect, join, ...)
+ *
+ * For AP/GO and mesh mode, the channel can be set with the
+ * channel userspace API, but is only stored and passed to the
+ * low-level driver when the AP starts or the mesh is joined.
+ * This is for backward compatibility, userspace can also give
+ * the channel in the start-ap or join-mesh commands instead.
*
* Monitors are special as they are normally slaved to
* whatever else is going on, so they behave as though
* you tried setting the wiphy channel itself.
- *
- * For AP/GO modes, it's only for compatibility, you can
- * also give the channel to the start-AP command.
*/
return !wdev ||
wdev->iftype == NL80211_IFTYPE_AP ||
@@ -1246,6 +1249,9 @@ static int __nl80211_set_channel(struct cfg80211_registered_device *rdev,
wdev->preset_chantype = channel_type;
result = 0;
break;
+ case NL80211_IFTYPE_MESH_POINT:
+ result = cfg80211_set_mesh_freq(rdev, wdev, freq, channel_type);
+ break;
default:
wdev_lock(wdev);
result = cfg80211_set_freq(rdev, wdev, freq, channel_type);
@@ -1335,8 +1341,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
result = 0;
mutex_lock(&rdev->mtx);
- } else if (netif_running(netdev) &&
- nl80211_can_set_dev_channel(netdev->ieee80211_ptr))
+ } else if (nl80211_can_set_dev_channel(netdev->ieee80211_ptr))
wdev = netdev->ieee80211_ptr;
else
wdev = NULL;
@@ -6080,6 +6085,24 @@ static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info)
return err;
}
+ if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) {
+ enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
+
+ if (info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE] &&
+ !nl80211_valid_channel_type(info, &channel_type))
+ return -EINVAL;
+
+ setup.channel = rdev_freq_to_chan(rdev,
+ nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]),
+ channel_type);
+ if (!setup.channel)
+ return -EINVAL;
+ setup.channel_type = channel_type;
+ } else {
+ /* cfg80211_join_mesh() will sort it out */
+ setup.channel = NULL;
+ }
+
return cfg80211_join_mesh(rdev, dev, &setup, &cfg);
}
diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c
index b082fcc26f06..faeb03548aa4 100644
--- a/net/wireless/wext-compat.c
+++ b/net/wireless/wext-compat.c
@@ -796,7 +796,6 @@ static int cfg80211_wext_siwfreq(struct net_device *dev,
case NL80211_IFTYPE_ADHOC:
return cfg80211_ibss_wext_siwfreq(dev, info, wextfreq, extra);
case NL80211_IFTYPE_MONITOR:
- case NL80211_IFTYPE_MESH_POINT:
freq = cfg80211_wext_freq(wdev->wiphy, wextfreq);
if (freq < 0)
return freq;
@@ -808,6 +807,17 @@ static int cfg80211_wext_siwfreq(struct net_device *dev,
wdev_unlock(wdev);
mutex_unlock(&rdev->devlist_mtx);
return err;
+ case NL80211_IFTYPE_MESH_POINT:
+ freq = cfg80211_wext_freq(wdev->wiphy, wextfreq);
+ if (freq < 0)
+ return freq;
+ if (freq == 0)
+ return -EINVAL;
+ mutex_lock(&rdev->devlist_mtx);
+ err = cfg80211_set_mesh_freq(rdev, wdev, freq,
+ NL80211_CHAN_NO_HT);
+ mutex_unlock(&rdev->devlist_mtx);
+ return err;
default:
return -EOPNOTSUPP;
}