summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/clock/imx5-clock.txt14
-rw-r--r--Documentation/devicetree/bindings/clock/imx6q-clock.txt3
-rw-r--r--Documentation/devicetree/bindings/reset/fsl,imx-src.txt49
-rw-r--r--Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt3
-rw-r--r--arch/arm/Kconfig4
-rw-r--r--arch/arm/Kconfig.debug4
-rw-r--r--arch/arm/boot/dts/armada-370-xp.dtsi5
-rw-r--r--arch/arm/boot/dts/zynq-7000.dtsi7
-rw-r--r--arch/arm/configs/imx_v4_v5_defconfig1
-rw-r--r--arch/arm/configs/imx_v6_v7_defconfig1
-rw-r--r--arch/arm/include/debug/mvebu.S2
-rw-r--r--arch/arm/mach-dove/Makefile2
-rw-r--r--arch/arm/mach-dove/addr-map.c125
-rw-r--r--arch/arm/mach-dove/board-dt.c2
-rw-r--r--arch/arm/mach-dove/common.c39
-rw-r--r--arch/arm/mach-dove/common.h2
-rw-r--r--arch/arm/mach-dove/include/mach/dove.h5
-rw-r--r--arch/arm/mach-imx/Kconfig10
-rw-r--r--arch/arm/mach-imx/Makefile1
-rw-r--r--arch/arm/mach-imx/anatop.c103
-rw-r--r--arch/arm/mach-imx/clk-imx51-imx53.c75
-rw-r--r--arch/arm/mach-imx/clk-imx6q.c126
-rw-r--r--arch/arm/mach-imx/clk.h17
-rw-r--r--arch/arm/mach-imx/common.h10
-rw-r--r--arch/arm/mach-imx/gpc.c23
-rw-r--r--arch/arm/mach-imx/mach-imx6q.c74
-rw-r--r--arch/arm/mach-imx/mm-imx1.c2
-rw-r--r--arch/arm/mach-imx/mxc.h11
-rw-r--r--arch/arm/mach-imx/platsmp.c4
-rw-r--r--arch/arm/mach-imx/pm-imx6q.c4
-rw-r--r--arch/arm/mach-imx/src.c66
-rw-r--r--arch/arm/mach-kirkwood/Makefile2
-rw-r--r--arch/arm/mach-kirkwood/addr-map.c91
-rw-r--r--arch/arm/mach-kirkwood/board-dt.c2
-rw-r--r--arch/arm/mach-kirkwood/common.c38
-rw-r--r--arch/arm/mach-kirkwood/common.h2
-rw-r--r--arch/arm/mach-kirkwood/include/mach/kirkwood.h7
-rw-r--r--arch/arm/mach-kirkwood/pcie.c1
-rw-r--r--arch/arm/mach-mv78xx0/Makefile2
-rw-r--r--arch/arm/mach-mv78xx0/addr-map.c93
-rw-r--r--arch/arm/mach-mv78xx0/common.c10
-rw-r--r--arch/arm/mach-mv78xx0/include/mach/mv78xx0.h9
-rw-r--r--arch/arm/mach-mv78xx0/pcie.c21
-rw-r--r--arch/arm/mach-mvebu/Kconfig2
-rw-r--r--arch/arm/mach-mvebu/Makefile2
-rw-r--r--arch/arm/mach-mvebu/addr-map.c137
-rw-r--r--arch/arm/mach-mvebu/armada-370-xp.c18
-rw-r--r--arch/arm/mach-mvebu/armada-370-xp.h8
-rw-r--r--arch/arm/mach-mvebu/platsmp.c2
-rw-r--r--arch/arm/mach-orion5x/Makefile2
-rw-r--r--arch/arm/mach-orion5x/addr-map.c155
-rw-r--r--arch/arm/mach-orion5x/board-dt.c2
-rw-r--r--arch/arm/mach-orion5x/common.c49
-rw-r--r--arch/arm/mach-orion5x/common.h13
-rw-r--r--arch/arm/mach-orion5x/d2net-setup.c4
-rw-r--r--arch/arm/mach-orion5x/db88f5281-setup.c13
-rw-r--r--arch/arm/mach-orion5x/dns323-setup.c3
-rw-r--r--arch/arm/mach-orion5x/edmini_v2-setup.c4
-rw-r--r--arch/arm/mach-orion5x/include/mach/orion5x.h6
-rw-r--r--arch/arm/mach-orion5x/kurobox_pro-setup.c8
-rw-r--r--arch/arm/mach-orion5x/ls-chl-setup.c4
-rw-r--r--arch/arm/mach-orion5x/ls_hgl-setup.c4
-rw-r--r--arch/arm/mach-orion5x/lsmini-setup.c4
-rw-r--r--arch/arm/mach-orion5x/mss2-setup.c3
-rw-r--r--arch/arm/mach-orion5x/mv2120-setup.c3
-rw-r--r--arch/arm/mach-orion5x/net2big-setup.c4
-rw-r--r--arch/arm/mach-orion5x/pci.c7
-rw-r--r--arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c4
-rw-r--r--arch/arm/mach-orion5x/rd88f5181l-ge-setup.c4
-rw-r--r--arch/arm/mach-orion5x/rd88f5182-setup.c7
-rw-r--r--arch/arm/mach-orion5x/terastation_pro2-setup.c4
-rw-r--r--arch/arm/mach-orion5x/ts209-setup.c4
-rw-r--r--arch/arm/mach-orion5x/ts409-setup.c4
-rw-r--r--arch/arm/mach-orion5x/wnr854t-setup.c4
-rw-r--r--arch/arm/mach-orion5x/wrt350n-v2-setup.c4
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7779.c23
-rw-r--r--arch/arm/mach-shmobile/include/mach/r8a7779.h2
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7779.c23
-rw-r--r--arch/arm/mach-zynq/Kconfig1
-rw-r--r--arch/arm/mach-zynq/Makefile6
-rw-r--r--arch/arm/mach-zynq/common.c67
-rw-r--r--arch/arm/mach-zynq/common.h20
-rw-r--r--arch/arm/mach-zynq/headsmp.S24
-rw-r--r--arch/arm/mach-zynq/hotplug.c104
-rw-r--r--arch/arm/mach-zynq/platsmp.c136
-rw-r--r--arch/arm/mach-zynq/slcr.c125
-rw-r--r--arch/arm/plat-orion/Makefile6
-rw-r--r--arch/arm/plat-orion/addr-map.c178
-rw-r--r--arch/arm/plat-orion/gpio.c59
-rw-r--r--drivers/bus/Kconfig7
-rw-r--r--drivers/bus/Makefile1
-rw-r--r--drivers/bus/mvebu-mbus.c870
-rw-r--r--drivers/pinctrl/sh-pfc/pfc-r8a7779.c2
-rw-r--r--drivers/staging/imx-drm/ipu-v3/ipu-common.c12
-rw-r--r--include/linux/mbus.h27
95 files changed, 2256 insertions, 1001 deletions
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt
index 2a0c904c46ae..d71b4b2c077d 100644
--- a/Documentation/devicetree/bindings/clock/imx5-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.txt
@@ -38,7 +38,6 @@ clocks and IDs.
usb_phy_podf 23
cpu_podf 24
di_pred 25
- tve_di 26
tve_s 27
uart1_ipg_gate 28
uart1_per_gate 29
@@ -172,6 +171,19 @@ clocks and IDs.
can1_serial_gate 157
can1_ipg_gate 158
owire_gate 159
+ gpu3d_s 160
+ gpu2d_s 161
+ gpu3d_gate 162
+ gpu2d_gate 163
+ garb_gate 164
+ cko1_sel 165
+ cko1_podf 166
+ cko1 167
+ cko2_sel 168
+ cko2_podf 169
+ cko2 170
+ srtc_gate 171
+ pata_gate 172
Examples (for mx53):
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index 969b38e06ad3..6deb6fd1c7cd 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -205,6 +205,9 @@ clocks and IDs.
enet_ref 190
usbphy1_gate 191
usbphy2_gate 192
+ pll4_post_div 193
+ pll5_post_div 194
+ pll5_video_div 195
Examples:
diff --git a/Documentation/devicetree/bindings/reset/fsl,imx-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt
new file mode 100644
index 000000000000..13301777e11c
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt
@@ -0,0 +1,49 @@
+Freescale i.MX System Reset Controller
+======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "fsl,<chip>-src"
+- reg: should be register base and length as documented in the
+ datasheet
+- interrupts: Should contain SRC interrupt and CPU WDOG interrupt,
+ in this order.
+- #reset-cells: 1, see below
+
+example:
+
+src: src@020d8000 {
+ compatible = "fsl,imx6q-src";
+ reg = <0x020d8000 0x4000>;
+ interrupts = <0 91 0x04 0 96 0x04>;
+ #reset-cells = <1>;
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+
+The system reset controller can be used to reset the GPU, VPU,
+IPU, and OpenVG IP modules on i.MX5 and i.MX6 ICs. Those device
+nodes should specify the reset line on the SRC in their resets
+property, containing a phandle to the SRC device node and a
+RESET_INDEX specifying which module to reset, as described in
+reset.txt
+
+example:
+
+ ipu1: ipu@02400000 {
+ resets = <&src 2>;
+ };
+ ipu2: ipu@02800000 {
+ resets = <&src 4>;
+ };
+
+The following RESET_INDEX values are valid for i.MX5:
+GPU_RESET 0
+VPU_RESET 1
+IPU1_RESET 2
+OPEN_VG_RESET 3
+The following additional RESET_INDEX value is valid for i.MX6:
+IPU2_RESET 4
diff --git a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
index 8071ac20d4b3..b876d4925a57 100644
--- a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
+++ b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
@@ -8,6 +8,8 @@ Required properties:
- interrupts: Should contain sync interrupt and error interrupt,
in this order.
- #crtc-cells: 1, See below
+- resets: phandle pointing to the system reset controller and
+ reset line index, see reset/fsl,imx-src.txt for details
example:
@@ -16,6 +18,7 @@ ipu: ipu@18000000 {
compatible = "fsl,imx53-ipu";
reg = <0x18000000 0x080000000>;
interrupts = <11 10>;
+ resets = <&src 2>;
};
Parallel display support
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5c56fa8824e9..18bef301d6e6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -498,6 +498,7 @@ config ARCH_DOVE
select PINCTRL_DOVE
select PLAT_ORION_LEGACY
select USB_ARCH_HAS_EHCI
+ select MVEBU_MBUS
help
Support for the Marvell Dove SoC 88AP510
@@ -511,6 +512,7 @@ config ARCH_KIRKWOOD
select PINCTRL
select PINCTRL_KIRKWOOD
select PLAT_ORION_LEGACY
+ select MVEBU_MBUS
help
Support for the following Marvell Kirkwood series SoCs:
88F6180, 88F6192 and 88F6281.
@@ -522,6 +524,7 @@ config ARCH_MV78XX0
select GENERIC_CLOCKEVENTS
select PCI
select PLAT_ORION_LEGACY
+ select MVEBU_MBUS
help
Support for the following Marvell MV78xx0 series SoCs:
MV781x0, MV782x0.
@@ -534,6 +537,7 @@ config ARCH_ORION5X
select GENERIC_CLOCKEVENTS
select PCI
select PLAT_ORION_LEGACY
+ select MVEBU_MBUS
help
Support for the following Marvell Orion 5x series SoCs:
Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index f57a6ba26e04..1d41908d5cda 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -245,11 +245,11 @@ choice
on i.MX53.
config DEBUG_IMX6Q_UART
- bool "i.MX6Q Debug UART"
+ bool "i.MX6Q/DL Debug UART"
depends on SOC_IMX6Q
help
Say Y here if you want kernel low-level debugging support
- on i.MX6Q.
+ on i.MX6Q/DL.
config DEBUG_MMP_UART2
bool "Kernel low-level debugging message via MMP UART2"
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 758c4ea90344..9693f796bcfe 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -73,11 +73,6 @@
clocks = <&coreclk 2>;
};
- addr-decoding@d0020000 {
- compatible = "marvell,armada-addr-decoding-controller";
- reg = <0xd0020000 0x258>;
- };
-
sata@d00a0000 {
compatible = "marvell,orion-sata";
reg = <0xd00a0000 0x2400>;
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 748fc347ed18..14fb2e609bab 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -136,5 +136,12 @@
clock-names = "cpu_1x";
clock-ranges;
};
+ scutimer: scutimer@f8f00600 {
+ interrupt-parent = <&intc>;
+ interrupts = < 1 13 0x301 >;
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = < 0xf8f00600 0x20 >;
+ clocks = <&cpu_clk 1>;
+ } ;
};
};
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index 02c657af4005..f07a847b00c9 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -109,6 +109,7 @@ CONFIG_I2C_IMX=y
CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_SPI_SPIDEV=y
+CONFIG_GPIO_SYSFS=y
CONFIG_W1=y
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_SLAVE_THERM=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 088d6c11a0fa..6ec010f248b5 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -9,6 +9,7 @@ CONFIG_CGROUPS=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
+CONFIG_PERF_EVENTS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_MODULES=y
diff --git a/arch/arm/include/debug/mvebu.S b/arch/arm/include/debug/mvebu.S
index 865c6d02b332..df191afa3be1 100644
--- a/arch/arm/include/debug/mvebu.S
+++ b/arch/arm/include/debug/mvebu.S
@@ -12,7 +12,7 @@
*/
#define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000
-#define ARMADA_370_XP_REGS_VIRT_BASE 0xfeb00000
+#define ARMADA_370_XP_REGS_VIRT_BASE 0xfec00000
.macro addruart, rp, rv, tmp
ldr \rp, =ARMADA_370_XP_REGS_PHYS_BASE
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
index 3f0a858fb597..4d9d2ffc4535 100644
--- a/arch/arm/mach-dove/Makefile
+++ b/arch/arm/mach-dove/Makefile
@@ -1,4 +1,4 @@
-obj-y += common.o addr-map.o irq.o
+obj-y += common.o irq.o
obj-$(CONFIG_DOVE_LEGACY) += mpp.o
obj-$(CONFIG_PCI) += pcie.o
obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o
diff --git a/arch/arm/mach-dove/addr-map.c b/arch/arm/mach-dove/addr-map.c
deleted file mode 100644
index 2a06c0163418..000000000000
--- a/arch/arm/mach-dove/addr-map.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * arch/arm/mach-dove/addr-map.c
- *
- * Address map functions for Marvell Dove 88AP510 SoC
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <asm/mach/arch.h>
-#include <asm/setup.h>
-#include <mach/dove.h>
-#include <plat/addr-map.h>
-#include "common.h"
-
-/*
- * Generic Address Decode Windows bit settings
- */
-#define TARGET_DDR 0x0
-#define TARGET_BOOTROM 0x1
-#define TARGET_CESA 0x3
-#define TARGET_PCIE0 0x4
-#define TARGET_PCIE1 0x8
-#define TARGET_SCRATCHPAD 0xd
-
-#define ATTR_CESA 0x01
-#define ATTR_BOOTROM 0xfd
-#define ATTR_DEV_SPI0_ROM 0xfe
-#define ATTR_DEV_SPI1_ROM 0xfb
-#define ATTR_PCIE_IO 0xe0
-#define ATTR_PCIE_MEM 0xe8
-#define ATTR_SCRATCHPAD 0x0
-
-static inline void __iomem *ddr_map_sc(int i)
-{
- return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4));
-}
-
-/*
- * Description of the windows needed by the platform code
- */
-static struct __initdata orion_addr_map_cfg addr_map_cfg = {
- .num_wins = 8,
- .remappable_wins = 4,
- .bridge_virt_base = BRIDGE_VIRT_BASE,
-};
-
-static const struct __initdata orion_addr_map_info addr_map_info[] = {
- /*
- * Windows for PCIe IO+MEM space.
- */
- { 0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE,
- TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE
- },
- { 1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE,
- TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE
- },
- { 2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE,
- TARGET_PCIE0, ATTR_PCIE_MEM, -1
- },
- { 3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE,
- TARGET_PCIE1, ATTR_PCIE_MEM, -1
- },
- /*
- * Window for CESA engine.
- */
- { 4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE,
- TARGET_CESA, ATTR_CESA, -1
- },
- /*
- * Window to the BootROM for Standby and Sleep Resume
- */
- { 5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE,
- TARGET_BOOTROM, ATTR_BOOTROM, -1
- },
- /*
- * Window to the PMU Scratch Pad space
- */
- { 6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE,
- TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1
- },
- /* End marker */
- { -1, 0, 0, 0, 0, 0 }
-};
-
-void __init dove_setup_cpu_mbus(void)
-{
- int i;
- int cs;
-
- /*
- * Disable, clear and configure windows.
- */
- orion_config_wins(&addr_map_cfg, addr_map_info);
-
- /*
- * Setup MBUS dram target info.
- */
- orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
-
- for (i = 0, cs = 0; i < 2; i++) {
- u32 map = readl(ddr_map_sc(i));
-
- /*
- * Chip select enabled?
- */
- if (map & 1) {
- struct mbus_dram_window *w;
-
- w = &orion_mbus_dram_info.cs[cs++];
- w->cs_index = i;
- w->mbus_attr = 0; /* CS address decoding done inside */
- /* the DDR controller, no need to */
- /* provide attributes */
- w->base = map & 0xff800000;
- w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
- }
- }
- orion_mbus_dram_info.num_cs = cs;
-}
diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-dove/board-dt.c
index fbde1dd67113..0b142803b2e1 100644
--- a/arch/arm/mach-dove/board-dt.c
+++ b/arch/arm/mach-dove/board-dt.c
@@ -64,7 +64,7 @@ static void __init dove_dt_init(void)
#ifdef CONFIG_CACHE_TAUROS2
tauros2_init(0);
#endif
- dove_setup_cpu_mbus();
+ dove_setup_cpu_wins();
/* Setup root of clk tree */
dove_of_clk_init();
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index c6b3b2bb50e7..e2b5da031f96 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -224,6 +224,9 @@ void __init dove_i2c_init(void)
void __init dove_init_early(void)
{
orion_time_set_base(TIMER_VIRT_BASE);
+ mvebu_mbus_init("marvell,dove-mbus",
+ BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
+ DOVE_MC_WINS_BASE, DOVE_MC_WINS_SZ);
}
static int __init dove_find_tclk(void)
@@ -326,6 +329,40 @@ void __init dove_sdio1_init(void)
platform_device_register(&dove_sdio1);
}
+void __init dove_setup_cpu_wins(void)
+{
+ /*
+ * The PCIe windows will no longer be statically allocated
+ * here once Dove is migrated to the pci-mvebu driver.
+ */
+ mvebu_mbus_add_window_remap_flags("pcie0.0",
+ DOVE_PCIE0_IO_PHYS_BASE,
+ DOVE_PCIE0_IO_SIZE,
+ DOVE_PCIE0_IO_BUS_BASE,
+ MVEBU_MBUS_PCI_IO);
+ mvebu_mbus_add_window_remap_flags("pcie1.0",
+ DOVE_PCIE1_IO_PHYS_BASE,
+ DOVE_PCIE1_IO_SIZE,
+ DOVE_PCIE1_IO_BUS_BASE,
+ MVEBU_MBUS_PCI_IO);
+ mvebu_mbus_add_window_remap_flags("pcie0.0",
+ DOVE_PCIE0_MEM_PHYS_BASE,
+ DOVE_PCIE0_MEM_SIZE,
+ MVEBU_MBUS_NO_REMAP,
+ MVEBU_MBUS_PCI_MEM);
+ mvebu_mbus_add_window_remap_flags("pcie1.0",
+ DOVE_PCIE1_MEM_PHYS_BASE,
+ DOVE_PCIE1_MEM_SIZE,
+ MVEBU_MBUS_NO_REMAP,
+ MVEBU_MBUS_PCI_MEM);
+ mvebu_mbus_add_window("cesa", DOVE_CESA_PHYS_BASE,
+ DOVE_CESA_SIZE);
+ mvebu_mbus_add_window("bootrom", DOVE_BOOTROM_PHYS_BASE,
+ DOVE_BOOTROM_SIZE);
+ mvebu_mbus_add_window("scratchpad", DOVE_SCRATCHPAD_PHYS_BASE,
+ DOVE_SCRATCHPAD_SIZE);
+}
+
void __init dove_init(void)
{
pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n",
@@ -334,7 +371,7 @@ void __init dove_init(void)
#ifdef CONFIG_CACHE_TAUROS2
tauros2_init(0);
#endif
- dove_setup_cpu_mbus();
+ dove_setup_cpu_wins();
/* Setup root of clk tree */
dove_clk_init();
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
index ee59fba4c6d1..e86347928b67 100644
--- a/arch/arm/mach-dove/common.h
+++ b/arch/arm/mach-dove/common.h
@@ -23,7 +23,7 @@ void dove_map_io(void);
void dove_init(void);
void dove_init_early(void);
void dove_init_irq(void);
-void dove_setup_cpu_mbus(void);
+void dove_setup_cpu_wins(void);
void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data);
void dove_sata_init(struct mv_sata_platform_data *sata_data);
#ifdef CONFIG_PCI
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index 661725e3115a..0c4b35f4ee5b 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -77,6 +77,8 @@
/* North-South Bridge */
#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x20000)
#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x20000)
+#define BRIDGE_WINS_BASE (BRIDGE_PHYS_BASE)
+#define BRIDGE_WINS_SZ (0x80)
/* Cryptographic Engine */
#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x30000)
@@ -168,6 +170,9 @@
#define DOVE_SSP_CLOCK_ENABLE (1 << 1)
#define DOVE_SSP_BPB_CLOCK_SRC_SSP (1 << 11)
/* Memory Controller */
+#define DOVE_MC_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x00000)
+#define DOVE_MC_WINS_BASE (DOVE_MC_PHYS_BASE + 0x100)
+#define DOVE_MC_WINS_SZ (0x8)
#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE + 0x00000)
/* LCD Controller */
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 2ebc97e16b91..78f795d73cb6 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -65,6 +65,9 @@ config IRAM_ALLOC
bool
select GENERIC_ALLOCATOR
+config HAVE_IMX_ANATOP
+ bool
+
config HAVE_IMX_GPC
bool
@@ -73,6 +76,7 @@ config HAVE_IMX_MMDC
config HAVE_IMX_SRC
def_bool y if SMP
+ select ARCH_HAS_RESET_CONTROLLER
config IMX_HAVE_IOMUX_V1
bool
@@ -115,6 +119,8 @@ config SOC_IMX25
config SOC_IMX27
bool
+ select ARCH_HAS_CPUFREQ
+ select ARCH_HAS_OPP
select COMMON_CLK
select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
@@ -142,6 +148,7 @@ config SOC_IMX35
config SOC_IMX5
bool
select ARCH_HAS_CPUFREQ
+ select ARCH_HAS_OPP
select ARCH_MXC_IOMUX_V3
select COMMON_CLK
select CPU_V7
@@ -783,7 +790,7 @@ config SOC_IMX53
This enables support for Freescale i.MX53 processor.
config SOC_IMX6Q
- bool "i.MX6 Quad support"
+ bool "i.MX6 Quad/DualLite support"
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
@@ -796,6 +803,7 @@ config SOC_IMX6Q
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if LOCAL_TIMERS
select HAVE_CAN_FLEXCAN if CAN
+ select HAVE_IMX_ANATOP
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index fbe60a145344..930958973f81 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -91,6 +91,7 @@ obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
+obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
obj-$(CONFIG_HAVE_IMX_SRC) += src.o
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
new file mode 100644
index 000000000000..0cfa07dd9aa4
--- /dev/null
+++ b/arch/arm/mach-imx/anatop.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include "common.h"
+
+#define REG_SET 0x4
+#define REG_CLR 0x8
+
+#define ANADIG_REG_2P5 0x130
+#define ANADIG_REG_CORE 0x140
+#define ANADIG_ANA_MISC0 0x150
+#define ANADIG_USB1_CHRG_DETECT 0x1b0
+#define ANADIG_USB2_CHRG_DETECT 0x210
+#define ANADIG_DIGPROG 0x260
+
+#define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x40000
+#define BM_ANADIG_REG_CORE_FET_ODRIVE 0x20000000
+#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG 0x1000
+#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x80000
+#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x100000
+
+static struct regmap *anatop;
+
+static void imx_anatop_enable_weak2p5(bool enable)
+{
+ u32 reg, val;
+
+ regmap_read(anatop, ANADIG_ANA_MISC0, &val);
+
+ /* can only be enabled when stop_mode_config is clear. */
+ reg = ANADIG_REG_2P5;
+ reg += (enable && (val & BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG) == 0) ?
+ REG_SET : REG_CLR;
+ regmap_write(anatop, reg, BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG);
+}
+
+static void imx_anatop_enable_fet_odrive(bool enable)
+{
+ regmap_write(anatop, ANADIG_REG_CORE + (enable ? REG_SET : REG_CLR),
+ BM_ANADIG_REG_CORE_FET_ODRIVE);
+}
+
+void imx_anatop_pre_suspend(void)
+{
+ imx_anatop_enable_weak2p5(true);
+ imx_anatop_enable_fet_odrive(true);
+}
+
+void imx_anatop_post_resume(void)
+{
+ imx_anatop_enable_fet_odrive(false);
+ imx_anatop_enable_weak2p5(false);
+}
+
+void imx_anatop_usb_chrg_detect_disable(void)
+{
+ regmap_write(anatop, ANADIG_USB1_CHRG_DETECT,
+ BM_ANADIG_USB_CHRG_DETECT_EN_B
+ | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
+ regmap_write(anatop, ANADIG_USB2_CHRG_DETECT,
+ BM_ANADIG_USB_CHRG_DETECT_EN_B |
+ BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
+}
+
+u32 imx_anatop_get_digprog(void)
+{
+ struct device_node *np;
+ void __iomem *anatop_base;
+ static u32 digprog;
+
+ if (digprog)
+ return digprog;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
+ anatop_base = of_iomap(np, 0);
+ WARN_ON(!anatop_base);
+ digprog = readl_relaxed(anatop_base + ANADIG_DIGPROG);
+
+ return digprog;
+}
+
+void __init imx_anatop_init(void)
+{
+ anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
+ if (IS_ERR(anatop)) {
+ pr_err("%s: failed to find imx6q-anatop regmap!\n", __func__);
+ return;
+ }
+}
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 2bc623b414c1..6fc486b6a3c6 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -45,16 +45,40 @@ static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "
static const char *mx53_ldb_di1_sel[] = { "pll3_sw", "pll4_sw", };
static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", };
static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", };
-static const char *tve_sel[] = { "tve_pred", "tve_ext_sel", };
+static const char *mx51_tve_sel[] = { "tve_pred", "tve_ext_sel", };
static const char *ipu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
+static const char *gpu3d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" };
+static const char *gpu2d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" };
static const char *vpu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
static const char *mx53_can_sel[] = { "ipg", "ckih1", "ckih2", "lp_apm", };
+static const char *mx53_cko1_sel[] = {
+ "cpu_podf", "pll1_sw", "pll2_sw", "pll3_sw",
+ "emi_slow_podf", "pll4_sw", "nfc_podf", "dummy",
+ "di_pred", "dummy", "dummy", "ahb",
+ "ipg", "per_root", "ckil", "dummy",};
+static const char *mx53_cko2_sel[] = {
+ "dummy"/* dptc_core */, "dummy"/* dptc_perich */,
+ "dummy", "esdhc_a_podf",
+ "usboh3_podf", "dummy"/* wrck_clk_root */,
+ "ecspi_podf", "dummy"/* pll1_ref_clk */,
+ "esdhc_b_podf", "dummy"/* ddr_clk_root */,
+ "dummy"/* arm_axi_clk_root */, "dummy"/* usb_phy_out */,
+ "vpu_sel", "ipu_sel",
+ "osc", "ckih1",
+ "dummy", "esdhc_c_sel",
+ "ssi1_root_podf", "ssi2_root_podf",
+ "dummy", "dummy",
+ "dummy"/* lpsr_clk_root */, "dummy"/* pgc_clk_root */,
+ "dummy"/* tve_out */, "usb_phy_sel",
+ "tve_sel", "lp_apm",
+ "uart_root", "dummy"/* spdif0_clk_root */,
+ "dummy", "dummy", };
enum imx5_clks {
dummy, ckil, osc, ckih1, ckih2, ahb, ipg, axi_a, axi_b, uart_pred,
uart_root, esdhc_a_pred, esdhc_b_pred, esdhc_c_s, esdhc_d_s,
emi_sel, emi_slow_podf, nfc_podf, ecspi_pred, ecspi_podf, usboh3_pred,
- usboh3_podf, usb_phy_pred, usb_phy_podf, cpu_podf, di_pred, tve_di,
+ usboh3_podf, usb_phy_pred, usb_phy_podf, cpu_podf, di_pred, tve_di_unused,
tve_s, uart1_ipg_gate, uart1_per_gate, uart2_ipg_gate,
uart2_per_gate, uart3_ipg_gate, uart3_per_gate, i2c1_gate, i2c2_gate,
gpt_ipg_gate, pwm1_ipg_gate, pwm1_hf_gate, pwm2_ipg_gate, pwm2_hf_gate,
@@ -83,7 +107,10 @@ enum imx5_clks {
ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate,
epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate,
can_sel, can1_serial_gate, can1_ipg_gate,
- owire_gate,
+ owire_gate, gpu3d_s, gpu2d_s, gpu3d_gate, gpu2d_gate, garb_gate,
+ cko1_sel, cko1_podf, cko1,
+ cko2_sel, cko2_podf, cko2,
+ srtc_gate, pata_gate,
clk_max
};
@@ -160,8 +187,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
usb_phy_sel_str, ARRAY_SIZE(usb_phy_sel_str));
clk[cpu_podf] = imx_clk_divider("cpu_podf", "pll1_sw", MXC_CCM_CACRR, 0, 3);
clk[di_pred] = imx_clk_divider("di_pred", "pll3_sw", MXC_CCM_CDCDR, 6, 3);
- clk[tve_di] = imx_clk_fixed("tve_di", 65000000); /* FIXME */
- clk[tve_s] = imx_clk_mux("tve_sel", MXC_CCM_CSCMR1, 7, 1, tve_sel, ARRAY_SIZE(tve_sel));
clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", MXC_CCM_CCGR0, 30);
clk[uart1_ipg_gate] = imx_clk_gate2("uart1_ipg_gate", "ipg", MXC_CCM_CCGR1, 6);
clk[uart1_per_gate] = imx_clk_gate2("uart1_per_gate", "uart_root", MXC_CCM_CCGR1, 8);
@@ -200,6 +225,11 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk[nfc_gate] = imx_clk_gate2("nfc_gate", "nfc_podf", MXC_CCM_CCGR5, 20);
clk[ipu_di0_gate] = imx_clk_gate2("ipu_di0_gate", "ipu_di0_sel", MXC_CCM_CCGR6, 10);
clk[ipu_di1_gate] = imx_clk_gate2("ipu_di1_gate", "ipu_di1_sel", MXC_CCM_CCGR6, 12);
+ clk[gpu3d_s] = imx_clk_mux("gpu3d_sel", MXC_CCM_CBCMR, 4, 2, gpu3d_sel, ARRAY_SIZE(gpu3d_sel));
+ clk[gpu2d_s] = imx_clk_mux("gpu2d_sel", MXC_CCM_CBCMR, 16, 2, gpu2d_sel, ARRAY_SIZE(gpu2d_sel));
+ clk[gpu3d_gate] = imx_clk_gate2("gpu3d_gate", "gpu3d_sel", MXC_CCM_CCGR5, 2);
+ clk[garb_gate] = imx_clk_gate2("garb_gate", "axi_a", MXC_CCM_CCGR5, 4);
+ clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "gpu2d_sel", MXC_CCM_CCGR6, 14);
clk[vpu_s] = imx_clk_mux("vpu_sel", MXC_CCM_CBCMR, 14, 2, vpu_sel, ARRAY_SIZE(vpu_sel));
clk[vpu_gate] = imx_clk_gate2("vpu_gate", "vpu_sel", MXC_CCM_CCGR5, 6);
clk[vpu_reference_gate] = imx_clk_gate2("vpu_reference_gate", "osc", MXC_CCM_CCGR5, 8);
@@ -235,6 +265,8 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk[epit2_ipg_gate] = imx_clk_gate2("epit2_ipg_gate", "ipg", MXC_CCM_CCGR2, 6);
clk[epit2_hf_gate] = imx_clk_gate2("epit2_hf_gate", "per_root", MXC_CCM_CCGR2, 8);
clk[owire_gate] = imx_clk_gate2("owire_gate", "per_root", MXC_CCM_CCGR2, 22);
+ clk[srtc_gate] = imx_clk_gate2("srtc_gate", "per_root", MXC_CCM_CCGR4, 28);
+ clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", MXC_CCM_CCGR4, 0);
for (i = 0; i < ARRAY_SIZE(clk); i++)
if (IS_ERR(clk[i]))
@@ -286,7 +318,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.0");
clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.1");
clk_register_clkdev(clk[dummy], NULL, "imx-keypad");
- clk_register_clkdev(clk[tve_gate], NULL, "imx-tve.0");
clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx-tve.0");
clk_register_clkdev(clk[gpc_dvfs], "gpc_dvfs", NULL);
clk_register_clkdev(clk[epit1_ipg_gate], "ipg", "imx-epit.0");
@@ -331,8 +362,10 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
mx51_ipu_di0_sel, ARRAY_SIZE(mx51_ipu_di0_sel));
clk[ipu_di1_sel] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
mx51_ipu_di1_sel, ARRAY_SIZE(mx51_ipu_di1_sel));
- clk[tve_ext_sel] = imx_clk_mux("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
- mx51_tve_ext_sel, ARRAY_SIZE(mx51_tve_ext_sel));
+ clk[tve_ext_sel] = imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
+ mx51_tve_ext_sel, ARRAY_SIZE(mx51_tve_ext_sel), CLK_SET_RATE_PARENT);
+ clk[tve_s] = imx_clk_mux("tve_sel", MXC_CCM_CSCMR1, 7, 1,
+ mx51_tve_sel, ARRAY_SIZE(mx51_tve_sel));
clk[tve_gate] = imx_clk_gate2("tve_gate", "tve_sel", MXC_CCM_CCGR2, 30);
clk[tve_pred] = imx_clk_divider("tve_pred", "pll3_sw", MXC_CCM_CDCDR, 28, 3);
clk[esdhc1_per_gate] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
@@ -420,23 +453,23 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
clk[pll3_sw] = imx_clk_pllv2("pll3_sw", "osc", MX53_DPLL3_BASE);
clk[pll4_sw] = imx_clk_pllv2("pll4_sw", "osc", MX53_DPLL4_BASE);
- clk[ldb_di1_sel] = imx_clk_mux("ldb_di1_sel", MXC_CCM_CSCMR2, 9, 1,
- mx53_ldb_di1_sel, ARRAY_SIZE(mx53_ldb_di1_sel));
clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
- clk[ldb_di1_div] = imx_clk_divider("ldb_di1_div", "ldb_di1_div_3_5", MXC_CCM_CSCMR2, 11, 1);
+ clk[ldb_di1_div] = imx_clk_divider_flags("ldb_di1_div", "ldb_di1_div_3_5", MXC_CCM_CSCMR2, 11, 1, 0);
+ clk[ldb_di1_sel] = imx_clk_mux_flags("ldb_di1_sel", MXC_CCM_CSCMR2, 9, 1,
+ mx53_ldb_di1_sel, ARRAY_SIZE(mx53_ldb_di1_sel), CLK_SET_RATE_PARENT);
clk[di_pll4_podf] = imx_clk_divider("di_pll4_podf", "pll4_sw", MXC_CCM_CDCDR, 16, 3);
- clk[ldb_di0_sel] = imx_clk_mux("ldb_di0_sel", MXC_CCM_CSCMR2, 8, 1,
- mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel));
clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
- clk[ldb_di0_div] = imx_clk_divider("ldb_di0_div", "ldb_di0_div_3_5", MXC_CCM_CSCMR2, 10, 1);
+ clk[ldb_di0_div] = imx_clk_divider_flags("ldb_di0_div", "ldb_di0_div_3_5", MXC_CCM_CSCMR2, 10, 1, 0);
+ clk[ldb_di0_sel] = imx_clk_mux_flags("ldb_di0_sel", MXC_CCM_CSCMR2, 8, 1,
+ mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel), CLK_SET_RATE_PARENT);
clk[ldb_di0_gate] = imx_clk_gate2("ldb_di0_gate", "ldb_di0_div", MXC_CCM_CCGR6, 28);
clk[ldb_di1_gate] = imx_clk_gate2("ldb_di1_gate", "ldb_di1_div", MXC_CCM_CCGR6, 30);
clk[ipu_di0_sel] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel));
clk[ipu_di1_sel] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel));
- clk[tve_ext_sel] = imx_clk_mux("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
- mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel));
+ clk[tve_ext_sel] = imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
+ mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel), CLK_SET_RATE_PARENT);
clk[tve_gate] = imx_clk_gate2("tve_gate", "tve_pred", MXC_CCM_CCGR2, 30);
clk[tve_pred] = imx_clk_divider("tve_pred", "tve_ext_sel", MXC_CCM_CDCDR, 28, 3);
clk[esdhc1_per_gate] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
@@ -453,6 +486,16 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6);
clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22);
+ clk[cko1_sel] = imx_clk_mux("cko1_sel", MXC_CCM_CCOSR, 0, 4,
+ mx53_cko1_sel, ARRAY_SIZE(mx53_cko1_sel));
+ clk[cko1_podf] = imx_clk_divider("cko1_podf", "cko1_sel", MXC_CCM_CCOSR, 4, 3);
+ clk[cko1] = imx_clk_gate2("cko1", "cko1_podf", MXC_CCM_CCOSR, 7);
+
+ clk[cko2_sel] = imx_clk_mux("cko2_sel", MXC_CCM_CCOSR, 16, 5,
+ mx53_cko2_sel, ARRAY_SIZE(mx53_cko2_sel));
+ clk[cko2_podf] = imx_clk_divider("cko2_podf", "cko2_sel", MXC_CCM_CCOSR, 21, 3);
+ clk[cko2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24);
+
for (i = 0; i < ARRAY_SIZE(clk); i++)
if (IS_ERR(clk[i]))
pr_err("i.MX53 clk %d: register failed with %ld\n",
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index d38e54f5b6d7..151259003086 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011-2013 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
@@ -14,6 +14,7 @@
#include <linux/types.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
+#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
@@ -22,6 +23,12 @@
#include "clk.h"
#include "common.h"
+#include "hardware.h"
+
+#define CCR 0x0
+#define BM_CCR_WB_COUNT (0x7 << 16)
+#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21)
+#define BM_CCR_RBC_EN (0x1 << 27)
#define CCGR0 0x68
#define CCGR1 0x6c
@@ -67,6 +74,67 @@ void imx6q_set_chicken_bit(void)
writel_relaxed(val, ccm_base + CGPR);
}
+static void imx6q_enable_rbc(bool enable)
+{
+ u32 val;
+ static bool last_rbc_mode;
+
+ if (last_rbc_mode == enable)
+ return;
+ /*
+ * need to mask all interrupts in GPC before
+ * operating RBC configurations
+ */
+ imx_gpc_mask_all();
+
+ /* configure RBC enable bit */
+ val = readl_relaxed(ccm_base + CCR);
+ val &= ~BM_CCR_RBC_EN;
+ val |= enable ? BM_CCR_RBC_EN : 0;
+ writel_relaxed(val, ccm_base + CCR);
+
+ /* configure RBC count */
+ val = readl_relaxed(ccm_base + CCR);
+ val &= ~BM_CCR_RBC_BYPASS_COUNT;
+ val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
+ writel(val, ccm_base + CCR);
+
+ /*
+ * need to delay at least 2 cycles of CKIL(32K)
+ * due to hardware design requirement, which is
+ * ~61us, here we use 65us for safe
+ */
+ udelay(65);
+
+ /* restore GPC interrupt mask settings */
+ imx_gpc_restore_all();
+
+ last_rbc_mode = enable;
+}
+
+static void imx6q_enable_wb(bool enable)
+{
+ u32 val;
+ static bool last_wb_mode;
+
+ if (last_wb_mode == enable)
+ return;
+
+ /* configure well bias enable bit */
+ val = readl_relaxed(ccm_base + CLPCR);
+ val &= ~BM_CLPCR_WB_PER_AT_LPM;
+ val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
+ writel_relaxed(val, ccm_base + CLPCR);
+
+ /* configure well bias count */
+ val = readl_relaxed(ccm_base + CCR);
+ val &= ~BM_CCR_WB_COUNT;
+ val |= enable ? BM_CCR_WB_COUNT : 0;
+ writel_relaxed(val, ccm_base + CCR);
+
+ last_wb_mode = enable;
+}
+
int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
{
u32 val = readl_relaxed(ccm_base + CLPCR);
@@ -74,6 +142,8 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
val &= ~BM_CLPCR_LPM;
switch (mode) {
case WAIT_CLOCKED:
+ imx6q_enable_wb(false);
+ imx6q_enable_rbc(false);
break;
case WAIT_UNCLOCKED:
val |= 0x1 << BP_CLPCR_LPM;
@@ -92,6 +162,8 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
val |= 0x3 << BP_CLPCR_STBY_COUNT;
val |= BM_CLPCR_VSTBY;
val |= BM_CLPCR_SBYOS;
+ imx6q_enable_wb(true);
+ imx6q_enable_rbc(true);
break;
default:
return -EINVAL;
@@ -109,29 +181,29 @@ static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", };
static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", };
-static const char *audio_sels[] = { "pll4_audio", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
+static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
static const char *gpu_axi_sels[] = { "axi", "ahb", };
static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", };
static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
-static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
+static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
static const char *ipu2_di0_sels[] = { "ipu2_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
static const char *ipu2_di1_sels[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
static const char *hsi_tx_sels[] = { "pll3_120m", "pll2_pfd2_396m", };
static const char *pcie_axi_sels[] = { "axi", "ahb", };
-static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio", };
+static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", };
static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
static const char *emi_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *vdo_axi_sels[] = { "axi", "ahb", };
static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
-static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video",
+static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
"dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
- "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", };
+ "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", };
enum mx6q_clks {
dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
@@ -165,7 +237,7 @@ enum mx6q_clks {
pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
- usbphy2_gate, clk_max
+ usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, clk_max
};
static struct clk *clk[clk_max];
@@ -182,6 +254,21 @@ static struct clk_div_table clk_enet_ref_table[] = {
{ .val = 3, .div = 4, },
};
+static struct clk_div_table post_div_table[] = {
+ { .val = 2, .div = 1, },
+ { .val = 1, .div = 2, },
+ { .val = 0, .div = 4, },
+ { }
+};
+
+static struct clk_div_table video_div_table[] = {
+ { .val = 0, .div = 1, },
+ { .val = 1, .div = 2, },
+ { .val = 2, .div = 1, },
+ { .val = 3, .div = 4, },
+ { }
+};
+
int __init mx6q_clocks_init(void)
{
struct device_node *np;
@@ -208,6 +295,14 @@ int __init mx6q_clocks_init(void)
base = of_iomap(np, 0);
WARN_ON(!base);
+ /* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */
+ if (cpu_is_imx6q() && imx6q_revision() == IMX_CHIP_REVISION_1_0) {
+ post_div_table[1].div = 1;
+ post_div_table[2].div = 1;
+ video_div_table[1].div = 1;
+ video_div_table[2].div = 1;
+ };
+
/* type name parent_name base div_mask */
clk[pll1_sys] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f);
clk[pll2_bus] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1);
@@ -260,6 +355,10 @@ int __init mx6q_clocks_init(void)
clk[pll3_60m] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
clk[twd] = imx_clk_fixed_factor("twd", "arm", 1, 2);
+ clk[pll4_post_div] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
+ clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
+ clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
+
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ccm");
base = of_iomap(np, 0);
WARN_ON(!base);
@@ -283,8 +382,8 @@ int __init mx6q_clocks_init(void)
clk[gpu3d_shader_sel] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));
clk[ipu1_sel] = imx_clk_mux("ipu1_sel", base + 0x3c, 9, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
clk[ipu2_sel] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
- clk[ldb_di0_sel] = imx_clk_mux("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels));
- clk[ldb_di1_sel] = imx_clk_mux("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels));
+ clk[ldb_di0_sel] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
+ clk[ldb_di1_sel] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
clk[ipu1_di0_pre_sel] = imx_clk_mux("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
clk[ipu1_di1_pre_sel] = imx_clk_mux("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
clk[ipu2_di0_pre_sel] = imx_clk_mux("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
@@ -332,9 +431,9 @@ int __init mx6q_clocks_init(void)
clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3);
clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3);
clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
- clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1);
+ clk[ldb_di0_podf] = imx_clk_divider_flags("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1, 0);
clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
- clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1);
+ clk[ldb_di1_podf] = imx_clk_divider_flags("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1, 0);
clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3);
clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3);
clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3);
@@ -448,6 +547,11 @@ int __init mx6q_clocks_init(void)
clk_register_clkdev(clk[cko1], "cko1", NULL);
clk_register_clkdev(clk[arm], NULL, "cpu0");
+ if (imx6q_revision() != IMX_CHIP_REVISION_1_0) {
+ clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]);
+ clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
+ }
+
/*
* The gpmi needs 100MHz frequency in the EDO/Sync mode,
* We can not get the 100MHz from the pll2_pfd0_352m.
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
index 9d1f3b99d1d3..d9d9d9c66dff 100644
--- a/arch/arm/mach-imx/clk.h
+++ b/arch/arm/mach-imx/clk.h
@@ -59,6 +59,14 @@ static inline struct clk *imx_clk_divider(const char *name, const char *parent,
reg, shift, width, 0, &imx_ccm_lock);
}
+static inline struct clk *imx_clk_divider_flags(const char *name,
+ const char *parent, void __iomem *reg, u8 shift, u8 width,
+ unsigned long flags)
+{
+ return clk_register_divider(NULL, name, parent, flags,
+ reg, shift, width, 0, &imx_ccm_lock);
+}
+
static inline struct clk *imx_clk_gate(const char *name, const char *parent,
void __iomem *reg, u8 shift)
{
@@ -73,6 +81,15 @@ static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
width, 0, &imx_ccm_lock);
}
+static inline struct clk *imx_clk_mux_flags(const char *name,
+ void __iomem *reg, u8 shift, u8 width, const char **parents,
+ int num_parents, unsigned long flags)
+{
+ return clk_register_mux(NULL, name, parents, num_parents,
+ flags, reg, shift, width, 0,
+ &imx_ccm_lock);
+}
+
static inline struct clk *imx_clk_fixed_factor(const char *name,
const char *parent, unsigned int mult, unsigned int div)
{
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 9fea2522d7a3..4cba7dbb079f 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2004-2013 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
@@ -74,6 +74,7 @@ extern void mxc_set_cpu_type(unsigned int type);
extern void mxc_restart(char, const char *);
extern void mxc_arch_reset_init(void __iomem *);
extern int mx53_revision(void);
+extern int imx6q_revision(void);
extern int mx53_display_revision(void);
extern void imx_set_aips(void __iomem *);
extern int mxc_device_init(void);
@@ -128,6 +129,13 @@ extern void imx_src_prepare_restart(void);
extern void imx_gpc_init(void);
extern void imx_gpc_pre_suspend(void);
extern void imx_gpc_post_resume(void);
+extern void imx_gpc_mask_all(void);
+extern void imx_gpc_restore_all(void);
+extern void imx_anatop_init(void);
+extern void imx_anatop_pre_suspend(void);
+extern void imx_anatop_post_resume(void);
+extern void imx_anatop_usb_chrg_detect_disable(void);
+extern u32 imx_anatop_get_digprog(void);
extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
extern void imx6q_set_chicken_bit(void);
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 02b61cdf39b9..44a65e9ff1fc 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011-2013 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
@@ -69,6 +69,27 @@ static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on)
return 0;
}
+void imx_gpc_mask_all(void)
+{
+ void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+ int i;
+
+ for (i = 0; i < IMR_NUM; i++) {
+ gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
+ writel_relaxed(~0, reg_imr1 + i * 4);
+ }
+
+}
+
+void imx_gpc_restore_all(void)
+{
+ void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+ int i;
+
+ for (i = 0; i < IMR_NUM; i++)
+ writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
+}
+
static void imx_gpc_irq_unmask(struct irq_data *d)
{
void __iomem *reg;
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 99502eeefdf7..5536fd81379a 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011-2013 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
@@ -38,38 +38,32 @@
#include "cpuidle.h"
#include "hardware.h"
-#define IMX6Q_ANALOG_DIGPROG 0x260
+static u32 chip_revision;
-static int imx6q_revision(void)
+int imx6q_revision(void)
{
- struct device_node *np;
- void __iomem *base;
- static u32 rev;
-
- if (!rev) {
- np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
- if (!np)
- return IMX_CHIP_REVISION_UNKNOWN;
- base = of_iomap(np, 0);
- if (!base) {
- of_node_put(np);
- return IMX_CHIP_REVISION_UNKNOWN;
- }
- rev = readl_relaxed(base + IMX6Q_ANALOG_DIGPROG);
- iounmap(base);
- of_node_put(np);
- }
+ return chip_revision;
+}
+
+static void __init imx6q_init_revision(void)
+{
+ u32 rev = imx_anatop_get_digprog();
switch (rev & 0xff) {
case 0:
- return IMX_CHIP_REVISION_1_0;
+ chip_revision = IMX_CHIP_REVISION_1_0;
+ break;
case 1:
- return IMX_CHIP_REVISION_1_1;
+ chip_revision = IMX_CHIP_REVISION_1_1;
+ break;
case 2:
- return IMX_CHIP_REVISION_1_2;
+ chip_revision = IMX_CHIP_REVISION_1_2;
+ break;
default:
- return IMX_CHIP_REVISION_UNKNOWN;
+ chip_revision = IMX_CHIP_REVISION_UNKNOWN;
}
+
+ mxc_set_cpu_type(rev >> 16 & 0xff);
}
static void imx6q_restart(char mode, const char *cmd)
@@ -164,29 +158,7 @@ static void __init imx6q_1588_init(void)
}
static void __init imx6q_usb_init(void)
{
- struct regmap *anatop;
-
-#define HW_ANADIG_USB1_CHRG_DETECT 0x000001b0
-#define HW_ANADIG_USB2_CHRG_DETECT 0x00000210
-
-#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x00100000
-#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x00080000
-
- anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
- if (!IS_ERR(anatop)) {
- /*
- * The external charger detector needs to be disabled,
- * or the signal at DP will be poor
- */
- regmap_write(anatop, HW_ANADIG_USB1_CHRG_DETECT,
- BM_ANADIG_USB_CHRG_DETECT_EN_B
- | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
- regmap_write(anatop, HW_ANADIG_USB2_CHRG_DETECT,
- BM_ANADIG_USB_CHRG_DETECT_EN_B |
- BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
- } else {
- pr_warn("failed to find fsl,imx6q-anatop regmap\n");
- }
+ imx_anatop_usb_chrg_detect_disable();
}
static void __init imx6q_init_machine(void)
@@ -196,6 +168,7 @@ static void __init imx6q_init_machine(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ imx_anatop_init();
imx6q_pm_init();
imx6q_usb_init();
imx6q_1588_init();
@@ -282,6 +255,7 @@ static void __init imx6q_map_io(void)
static void __init imx6q_init_irq(void)
{
+ imx6q_init_revision();
l2x0_of_init(0, ~0UL);
imx_src_init();
imx_gpc_init();
@@ -292,15 +266,17 @@ static void __init imx6q_timer_init(void)
{
mx6q_clocks_init();
clocksource_of_init();
- imx_print_silicon_rev("i.MX6Q", imx6q_revision());
+ imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
+ imx6q_revision());
}
static const char *imx6q_dt_compat[] __initdata = {
+ "fsl,imx6dl",
"fsl,imx6q",
NULL,
};
-DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
+DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)")
.smp = smp_ops(imx_smp_ops),
.map_io = imx6q_map_io,
.init_irq = imx6q_init_irq,
diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
index 7a146671e65a..3c609c52d3eb 100644
--- a/arch/arm/mach-imx/mm-imx1.c
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -51,6 +51,8 @@ void __init mx1_init_irq(void)
void __init imx1_soc_init(void)
{
+ mxc_device_init();
+
mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256,
MX1_GPIO_INT_PORTA, 0);
mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256,
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index 7dce17a9fe6c..8629e5be7ecd 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -34,6 +34,8 @@
#define MXC_CPU_MX35 35
#define MXC_CPU_MX51 51
#define MXC_CPU_MX53 53
+#define MXC_CPU_IMX6DL 0x61
+#define MXC_CPU_IMX6Q 0x63
#define IMX_CHIP_REVISION_1_0 0x10
#define IMX_CHIP_REVISION_1_1 0x11
@@ -150,6 +152,15 @@ extern unsigned int __mxc_cpu_type;
#endif
#ifndef __ASSEMBLY__
+static inline bool cpu_is_imx6dl(void)
+{
+ return __mxc_cpu_type == MXC_CPU_IMX6DL;
+}
+
+static inline bool cpu_is_imx6q(void)
+{
+ return __mxc_cpu_type == MXC_CPU_IMX6Q;
+}
struct cpu_op {
u32 cpu_rate;
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 77e9a25ed0f6..4a69305db65e 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -68,8 +68,8 @@ static void __init imx_smp_init_cpus(void)
ncores = scu_get_core_count(scu_base);
- for (i = 0; i < ncores; i++)
- set_cpu_possible(i, true);
+ for (i = ncores; i < NR_CPUS; i++)
+ set_cpu_possible(i, false);
}
void imx_smp_prepare(void)
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index 5faba7a3c95f..204942749e21 100644
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011-2013 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
@@ -34,10 +34,12 @@ static int imx6q_pm_enter(suspend_state_t state)
case PM_SUSPEND_MEM:
imx6q_set_lpm(STOP_POWER_OFF);
imx_gpc_pre_suspend();
+ imx_anatop_pre_suspend();
imx_set_cpu_jump(0, v7_cpu_resume);
/* Zzz ... */
cpu_suspend(0, imx6q_suspend_finish);
imx_smp_prepare();
+ imx_anatop_post_resume();
imx_gpc_post_resume();
imx6q_set_lpm(WAIT_CLOCKED);
break;
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index 97d086889481..10a6b1a8c5ac 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -14,6 +14,7 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/reset-controller.h>
#include <linux/smp.h>
#include <asm/smp_plat.h>
#include "common.h"
@@ -21,10 +22,65 @@
#define SRC_SCR 0x000
#define SRC_GPR1 0x020
#define BP_SRC_SCR_WARM_RESET_ENABLE 0
+#define BP_SRC_SCR_SW_GPU_RST 1
+#define BP_SRC_SCR_SW_VPU_RST 2
+#define BP_SRC_SCR_SW_IPU1_RST 3
+#define BP_SRC_SCR_SW_OPEN_VG_RST 4
+#define BP_SRC_SCR_SW_IPU2_RST 12
#define BP_SRC_SCR_CORE1_RST 14
#define BP_SRC_SCR_CORE1_ENABLE 22
static void __iomem *src_base;
+static DEFINE_SPINLOCK(scr_lock);
+
+static const int sw_reset_bits[5] = {
+ BP_SRC_SCR_SW_GPU_RST,
+ BP_SRC_SCR_SW_VPU_RST,
+ BP_SRC_SCR_SW_IPU1_RST,
+ BP_SRC_SCR_SW_OPEN_VG_RST,
+ BP_SRC_SCR_SW_IPU2_RST
+};
+
+static int imx_src_reset_module(struct reset_controller_dev *rcdev,
+ unsigned long sw_reset_idx)
+{
+ unsigned long timeout;
+ unsigned long flags;
+ int bit;
+ u32 val;
+
+ if (!src_base)
+ return -ENODEV;
+
+ if (sw_reset_idx >= ARRAY_SIZE(sw_reset_bits))
+ return -EINVAL;
+
+ bit = 1 << sw_reset_bits[sw_reset_idx];
+
+ spin_lock_irqsave(&scr_lock, flags);
+ val = readl_relaxed(src_base + SRC_SCR);
+ val |= bit;
+ writel_relaxed(val, src_base + SRC_SCR);
+ spin_unlock_irqrestore(&scr_lock, flags);
+
+ timeout = jiffies + msecs_to_jiffies(1000);
+ while (readl(src_base + SRC_SCR) & bit) {
+ if (time_after(jiffies, timeout))
+ return -ETIME;
+ cpu_relax();
+ }
+
+ return 0;
+}
+
+static struct reset_control_ops imx_src_ops = {
+ .reset = imx_src_reset_module,
+};
+
+static struct reset_controller_dev imx_reset_controller = {
+ .ops = &imx_src_ops,
+ .nr_resets = ARRAY_SIZE(sw_reset_bits),
+};
void imx_enable_cpu(int cpu, bool enable)
{
@@ -32,9 +88,11 @@ void imx_enable_cpu(int cpu, bool enable)
cpu = cpu_logical_map(cpu);
mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
+ spin_lock(&scr_lock);
val = readl_relaxed(src_base + SRC_SCR);
val = enable ? val | mask : val & ~mask;
writel_relaxed(val, src_base + SRC_SCR);
+ spin_unlock(&scr_lock);
}
void imx_set_cpu_jump(int cpu, void *jump_addr)
@@ -61,9 +119,11 @@ void imx_src_prepare_restart(void)
u32 val;
/* clear enable bits of secondary cores */
+ spin_lock(&scr_lock);
val = readl_relaxed(src_base + SRC_SCR);
val &= ~(0x7 << BP_SRC_SCR_CORE1_ENABLE);
writel_relaxed(val, src_base + SRC_SCR);
+ spin_unlock(&scr_lock);
/* clear persistent entry register of primary core */
writel_relaxed(0, src_base + SRC_GPR1);
@@ -80,11 +140,17 @@ void __init imx_src_init(void)
src_base = of_iomap(np, 0);
WARN_ON(!src_base);
+ imx_reset_controller.of_node = np;
+ if (IS_ENABLED(CONFIG_RESET_CONTROLLER))
+ reset_controller_register(&imx_reset_controller);
+
/*
* force warm reset sources to generate cold reset
* for a more reliable restart
*/
+ spin_lock(&scr_lock);
val = readl_relaxed(src_base + SRC_SCR);
val &= ~(1 << BP_SRC_SCR_WARM_RESET_ENABLE);
writel_relaxed(val, src_base + SRC_SCR);
+ spin_unlock(&scr_lock);
}
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index cdbca328a412..e1f3735d3415 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -1,4 +1,4 @@
-obj-y += common.o addr-map.o irq.o pcie.o mpp.o
+obj-y += common.o irq.o pcie.o mpp.o
obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
deleted file mode 100644
index 8f0d162a1e1d..000000000000
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/addr-map.c
- *
- * Address map functions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <plat/addr-map.h>
-#include "common.h"
-
-/*
- * Generic Address Decode Windows bit settings
- */
-#define TARGET_DEV_BUS 1
-#define TARGET_SRAM 3
-#define TARGET_PCIE 4
-#define ATTR_DEV_SPI_ROM 0x1e
-#define ATTR_DEV_BOOT 0x1d
-#define ATTR_DEV_NAND 0x2f
-#define ATTR_DEV_CS3 0x37
-#define ATTR_DEV_CS2 0x3b
-#define ATTR_DEV_CS1 0x3d
-#define ATTR_DEV_CS0 0x3e
-#define ATTR_PCIE_IO 0xe0
-#define ATTR_PCIE_MEM 0xe8
-#define ATTR_PCIE1_IO 0xd0
-#define ATTR_PCIE1_MEM 0xd8
-#define ATTR_SRAM 0x01
-
-/*
- * Description of the windows needed by the platform code
- */
-static struct __initdata orion_addr_map_cfg addr_map_cfg = {
- .num_wins = 8,
- .remappable_wins = 4,
- .bridge_virt_base = BRIDGE_VIRT_BASE,
-};
-
-static const struct __initdata orion_addr_map_info addr_map_info[] = {
- /*
- * Windows for PCIe IO+MEM space.
- */
- { 0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE,
- TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE
- },
- { 1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
- TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE
- },
- { 2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE,
- TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE
- },
- { 3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE,
- TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE
- },
- /*
- * Window for NAND controller.
- */
- { 4, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
- TARGET_DEV_BUS, ATTR_DEV_NAND, -1
- },
- /*
- * Window for SRAM.
- */
- { 5, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
- TARGET_SRAM, ATTR_SRAM, -1
- },
- /* End marker */
- { -1, 0, 0, 0, 0, 0 }
-};
-
-void __init kirkwood_setup_cpu_mbus(void)
-{
- /*
- * Disable, clear and configure windows.
- */
- orion_config_wins(&addr_map_cfg, addr_map_info);
-
- /*
- * Setup MBUS dram target info.
- */
- orion_setup_cpu_mbus_target(&addr_map_cfg,
- (void __iomem *) DDR_WINDOW_CPU_BASE);
-}
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 7904758e771f..e9647b80cb59 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -93,7 +93,7 @@ static void __init kirkwood_dt_init(void)
*/
writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
- kirkwood_setup_cpu_mbus();
+ kirkwood_setup_wins();
kirkwood_l2_init();
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 49792a0cd2d3..c2cae69e6d2b 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -33,7 +33,6 @@
#include <linux/platform_data/usb-ehci-orion.h>
#include <plat/common.h>
#include <plat/time.h>
-#include <plat/addr-map.h>
#include <linux/platform_data/dma-mv_xor.h>
#include "common.h"
@@ -535,6 +534,9 @@ void __init kirkwood_init_early(void)
* the allocations won't fail.
*/
init_dma_coherent_pool_size(SZ_1M);
+ mvebu_mbus_init("marvell,kirkwood-mbus",
+ BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
+ DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ);
}
int kirkwood_tclk;
@@ -650,6 +652,38 @@ char * __init kirkwood_id(void)
}
}
+void __init kirkwood_setup_wins(void)
+{
+ /*
+ * The PCIe windows will no longer be statically allocated
+ * here once Kirkwood is migrated to the pci-mvebu driver.
+ */
+ mvebu_mbus_add_window_remap_flags("pcie0.0",
+ KIRKWOOD_PCIE_IO_PHYS_BASE,
+ KIRKWOOD_PCIE_IO_SIZE,
+ KIRKWOOD_PCIE_IO_BUS_BASE,
+ MVEBU_MBUS_PCI_IO);
+ mvebu_mbus_add_window_remap_flags("pcie0.0",
+ KIRKWOOD_PCIE_MEM_PHYS_BASE,
+ KIRKWOOD_PCIE_MEM_SIZE,
+ MVEBU_MBUS_NO_REMAP,
+ MVEBU_MBUS_PCI_MEM);
+ mvebu_mbus_add_window_remap_flags("pcie1.0",
+ KIRKWOOD_PCIE1_IO_PHYS_BASE,
+ KIRKWOOD_PCIE1_IO_SIZE,
+ KIRKWOOD_PCIE1_IO_BUS_BASE,
+ MVEBU_MBUS_PCI_IO);
+ mvebu_mbus_add_window_remap_flags("pcie1.0",
+ KIRKWOOD_PCIE1_MEM_PHYS_BASE,
+ KIRKWOOD_PCIE1_MEM_SIZE,
+ MVEBU_MBUS_NO_REMAP,
+ MVEBU_MBUS_PCI_MEM);
+ mvebu_mbus_add_window("nand", KIRKWOOD_NAND_MEM_PHYS_BASE,
+ KIRKWOOD_NAND_MEM_SIZE);
+ mvebu_mbus_add_window("sram", KIRKWOOD_SRAM_PHYS_BASE,
+ KIRKWOOD_SRAM_SIZE);
+}
+
void __init kirkwood_l2_init(void)
{
#ifdef CONFIG_CACHE_FEROCEON_L2
@@ -675,7 +709,7 @@ void __init kirkwood_init(void)
*/
writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
- kirkwood_setup_cpu_mbus();
+ kirkwood_setup_wins();
kirkwood_l2_init();
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 3147be2f34da..21da3b1ebd7b 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -30,7 +30,7 @@ void kirkwood_init(void);
void kirkwood_init_early(void);
void kirkwood_init_irq(void);
-void kirkwood_setup_cpu_mbus(void);
+void kirkwood_setup_wins(void);
void kirkwood_enable_pcie(void);
void kirkwood_pcie_id(u32 *dev, u32 *rev);
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index a05563a31c95..92976cef3910 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -60,8 +60,9 @@
* Register Map
*/
#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000)
-#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
-#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE + 0x1500)
+#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
+#define DDR_WINDOW_CPU_BASE (DDR_PHYS_BASE + 0x1500)
+#define DDR_WINDOW_CPU_SZ (0x20)
#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418)
#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000)
@@ -80,6 +81,8 @@
#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000)
#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000)
+#define BRIDGE_WINS_BASE (BRIDGE_PHYS_BASE)
+#define BRIDGE_WINS_SZ (0x80)
#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000)
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index d96ad4c09972..7f43e6c2f8c0 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -17,7 +17,6 @@
#include <asm/mach/pci.h>
#include <plat/pcie.h>
#include <mach/bridge-regs.h>
-#include <plat/addr-map.h>
#include "common.h"
static void kirkwood_enable_pcie_clk(const char *port)
diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile
index 67a13f9bfe64..7cd04634d302 100644
--- a/arch/arm/mach-mv78xx0/Makefile
+++ b/arch/arm/mach-mv78xx0/Makefile
@@ -1,4 +1,4 @@
-obj-y += common.o addr-map.o mpp.o irq.o pcie.o
+obj-y += common.o mpp.o irq.o pcie.o
obj-$(CONFIG_MACH_DB78X00_BP) += db78x00-bp-setup.o
obj-$(CONFIG_MACH_RD78X00_MASA) += rd78x00-masa-setup.o
obj-$(CONFIG_MACH_TERASTATION_WXL) += buffalo-wxl-setup.o
diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c
deleted file mode 100644
index 26e9876b50e9..000000000000
--- a/arch/arm/mach-mv78xx0/addr-map.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/addr-map.c
- *
- * Address map functions for Marvell MV78xx0 SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <plat/addr-map.h>
-#include <mach/mv78xx0.h>
-#include "common.h"
-
-/*
- * Generic Address Decode Windows bit settings
- */
-#define TARGET_DEV_BUS 1
-#define TARGET_PCIE0 4
-#define TARGET_PCIE1 8
-#define TARGET_PCIE(i) ((i) ? TARGET_PCIE1 : TARGET_PCIE0)
-#define ATTR_DEV_SPI_ROM 0x1f
-#define ATTR_DEV_BOOT 0x2f
-#define ATTR_DEV_CS3 0x37
-#define ATTR_DEV_CS2 0x3b
-#define ATTR_DEV_CS1 0x3d
-#define ATTR_DEV_CS0 0x3e
-#define ATTR_PCIE_IO(l) (0xf0 & ~(0x10 << (l)))
-#define ATTR_PCIE_MEM(l) (0xf8 & ~(0x10 << (l)))
-
-/*
- * CPU Address Decode Windows registers
- */
-#define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
-#define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4))
-
-static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
-{
- /*
- * Find the control register base address for this window.
- *
- * BRIDGE_VIRT_BASE points to the right (CPU0's or CPU1's)
- * MBUS bridge depending on which CPU core we're running on,
- * so we don't need to take that into account here.
- */
-
- return (win < 8) ? WIN0_OFF(win) : WIN8_OFF(win);
-}
-
-/*
- * Description of the windows needed by the platform code
- */
-static struct orion_addr_map_cfg addr_map_cfg __initdata = {
- .num_wins = 14,
- .remappable_wins = 8,
- .win_cfg_base = win_cfg_base,
-};
-
-void __init mv78xx0_setup_cpu_mbus(void)
-{
- /*
- * Disable, clear and configure windows.
- */
- orion_config_wins(&addr_map_cfg, NULL);
-
- /*
- * Setup MBUS dram target info.
- */
- if (mv78xx0_core_index() == 0)
- orion_setup_cpu_mbus_target(&addr_map_cfg,
- (void __iomem *) DDR_WINDOW_CPU0_BASE);
- else
- orion_setup_cpu_mbus_target(&addr_map_cfg,
- (void __iomem *) DDR_WINDOW_CPU1_BASE);
-}
-
-void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
- int maj, int min)
-{
- orion_setup_cpu_win(&addr_map_cfg, window, base, size,
- TARGET_PCIE(maj), ATTR_PCIE_IO(min), 0);
-}
-
-void __init mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
- int maj, int min)
-{
- orion_setup_cpu_win(&addr_map_cfg, window, base, size,
- TARGET_PCIE(maj), ATTR_PCIE_MEM(min), -1);
-}
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 0efa14498ebc..749a7f8c4992 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -334,6 +334,14 @@ void __init mv78xx0_uart3_init(void)
void __init mv78xx0_init_early(void)
{
orion_time_set_base(TIMER_VIRT_BASE);
+ if (mv78xx0_core_index() == 0)
+ mvebu_mbus_init("marvell,mv78xx0-mbus",
+ BRIDGE_WINS_CPU0_BASE, BRIDGE_WINS_SZ,
+ DDR_WINDOW_CPU0_BASE, DDR_WINDOW_CPU_SZ);
+ else
+ mvebu_mbus_init("marvell,mv78xx0-mbus",
+ BRIDGE_WINS_CPU1_BASE, BRIDGE_WINS_SZ,
+ DDR_WINDOW_CPU1_BASE, DDR_WINDOW_CPU_SZ);
}
void __init_refok mv78xx0_timer_init(void)
@@ -397,8 +405,6 @@ void __init mv78xx0_init(void)
printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000);
printk("TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000);
- mv78xx0_setup_cpu_mbus();
-
#ifdef CONFIG_CACHE_FEROCEON_L2
feroceon_l2_init(is_l2_writethrough());
#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index 46200a183cf2..723748d8ba7d 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -60,13 +60,18 @@
*/
#define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE)
#define BRIDGE_PHYS_BASE (MV78XX0_CORE_REGS_PHYS_BASE)
+#define BRIDGE_WINS_CPU0_BASE (MV78XX0_CORE0_REGS_PHYS_BASE)
+#define BRIDGE_WINS_CPU1_BASE (MV78XX0_CORE1_REGS_PHYS_BASE)
+#define BRIDGE_WINS_SZ (0xA000)
/*
* Register Map
*/
#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x00000)
-#define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE + 0x1500)
-#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE + 0x1570)
+#define DDR_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x00000)
+#define DDR_WINDOW_CPU0_BASE (DDR_PHYS_BASE + 0x1500)
+#define DDR_WINDOW_CPU1_BASE (DDR_PHYS_BASE + 0x1570)
+#define DDR_WINDOW_CPU_SZ (0x20)
#define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x10000)
#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x10000)
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index ee8c0b51df2c..dc26a654c496 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -10,11 +10,11 @@
#include <linux/kernel.h>
#include <linux/pci.h>
+#include <linux/mbus.h>
#include <video/vga.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
-#include <plat/addr-map.h>
#include <mach/mv78xx0.h>
#include "common.h"
@@ -54,7 +54,6 @@ static void __init mv78xx0_pcie_preinit(void)
int i;
u32 size_each;
u32 start;
- int win = 0;
pcie_io_space.name = "PCIe I/O Space";
pcie_io_space.start = MV78XX0_PCIE_IO_PHYS_BASE(0);
@@ -72,6 +71,7 @@ static void __init mv78xx0_pcie_preinit(void)
start = MV78XX0_PCIE_MEM_PHYS_BASE;
for (i = 0; i < num_pcie_ports; i++) {
struct pcie_port *pp = pcie_port + i;
+ char winname[MVEBU_MBUS_MAX_WINNAME_SZ];
snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
"PCIe %d.%d MEM", pp->maj, pp->min);
@@ -85,12 +85,17 @@ static void __init mv78xx0_pcie_preinit(void)
if (request_resource(&iomem_resource, &pp->res))
panic("can't allocate PCIe MEM sub-space");
- mv78xx0_setup_pcie_mem_win(win + i + 8, pp->res.start,
- resource_size(&pp->res),
- pp->maj, pp->min);
-
- mv78xx0_setup_pcie_io_win(win + i, i * SZ_64K, SZ_64K,
- pp->maj, pp->min);
+ snprintf(winname, sizeof(winname), "pcie%d.%d",
+ pp->maj, pp->min);
+
+ mvebu_mbus_add_window_remap_flags(winname,
+ pp->res.start,
+ resource_size(&pp->res),
+ MVEBU_MBUS_NO_REMAP,
+ MVEBU_MBUS_PCI_MEM);
+ mvebu_mbus_add_window_remap_flags(winname,
+ i * SZ_64K, SZ_64K,
+ 0, MVEBU_MBUS_PCI_IO);
}
}
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 440b13ef1fed..e11acbb0a46d 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -13,6 +13,8 @@ config ARCH_MVEBU
select MVEBU_CLK_CORE
select MVEBU_CLK_CPU
select MVEBU_CLK_GATING
+ select MVEBU_MBUS
+ select ZONE_DMA if ARM_LPAE
if ARCH_MVEBU
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index da93bcbc74c1..ba769e082ad4 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -5,6 +5,6 @@ AFLAGS_coherency_ll.o := -Wa,-march=armv7-a
obj-y += system-controller.o
obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o
-obj-$(CONFIG_ARCH_MVEBU) += addr-map.o coherency.o coherency_ll.o pmsu.o irq-armada-370-xp.o
+obj-$(CONFIG_ARCH_MVEBU) += coherency.o coherency_ll.o pmsu.o irq-armada-370-xp.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/arch/arm/mach-mvebu/addr-map.c b/arch/arm/mach-mvebu/addr-map.c
deleted file mode 100644
index ab9b3bd4fef5..000000000000
--- a/arch/arm/mach-mvebu/addr-map.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Address map functions for Marvell 370 / XP SoCs
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <plat/addr-map.h>
-
-/*
- * Generic Address Decode Windows bit settings
- */
-#define ARMADA_XP_TARGET_DEV_BUS 1
-#define ARMADA_XP_ATTR_DEV_BOOTROM 0x1D
-#define ARMADA_XP_TARGET_ETH1 3
-#define ARMADA_XP_TARGET_PCIE_0_2 4
-#define ARMADA_XP_TARGET_ETH0 7
-#define ARMADA_XP_TARGET_PCIE_1_3 8
-
-#define ARMADA_370_TARGET_DEV_BUS 1
-#define ARMADA_370_ATTR_DEV_BOOTROM 0x1D
-#define ARMADA_370_TARGET_PCIE_0 4
-#define ARMADA_370_TARGET_PCIE_1 8
-
-#define ARMADA_WINDOW_8_PLUS_OFFSET 0x90
-#define ARMADA_SDRAM_ADDR_DECODING_OFFSET 0x180
-
-static const struct __initdata orion_addr_map_info
-armada_xp_addr_map_info[] = {
- /*
- * Window for the BootROM, needed for SMP on Armada XP
- */
- { 0, 0xfff00000, SZ_1M, ARMADA_XP_TARGET_DEV_BUS,
- ARMADA_XP_ATTR_DEV_BOOTROM, -1 },
- /* End marker */
- { -1, 0, 0, 0, 0, 0 },
-};
-
-static const struct __initdata orion_addr_map_info
-armada_370_addr_map_info[] = {
- /* End marker */
- { -1, 0, 0, 0, 0, 0 },
-};
-
-static struct of_device_id of_addr_decoding_controller_table[] = {
- { .compatible = "marvell,armada-addr-decoding-controller" },
- { /* end of list */ },
-};
-
-static void __iomem *
-armada_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
-{
- unsigned int offset;
-
- /* The register layout is a bit annoying and the below code
- * tries to cope with it.
- * - At offset 0x0, there are the registers for the first 8
- * windows, with 4 registers of 32 bits per window (ctrl,
- * base, remap low, remap high)
- * - Then at offset 0x80, there is a hole of 0x10 bytes for
- * the internal registers base address and internal units
- * sync barrier register.
- * - Then at offset 0x90, there the registers for 12
- * windows, with only 2 registers of 32 bits per window
- * (ctrl, base).
- */
- if (win < 8)
- offset = (win << 4);
- else
- offset = ARMADA_WINDOW_8_PLUS_OFFSET + ((win - 8) << 3);
-
- return cfg->bridge_virt_base + offset;
-}
-
-static struct __initdata orion_addr_map_cfg addr_map_cfg = {
- .num_wins = 20,
- .remappable_wins = 8,
- .win_cfg_base = armada_cfg_base,
-};
-
-static int __init armada_setup_cpu_mbus(void)
-{
- struct device_node *np;
- void __iomem *mbus_unit_addr_decoding_base;
- void __iomem *sdram_addr_decoding_base;
-
- np = of_find_matching_node(NULL, of_addr_decoding_controller_table);
- if (!np)
- return -ENODEV;
-
- mbus_unit_addr_decoding_base = of_iomap(np, 0);
- BUG_ON(!mbus_unit_addr_decoding_base);
-
- sdram_addr_decoding_base =
- mbus_unit_addr_decoding_base +
- ARMADA_SDRAM_ADDR_DECODING_OFFSET;
-
- addr_map_cfg.bridge_virt_base = mbus_unit_addr_decoding_base;
-
- if (of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric"))
- addr_map_cfg.hw_io_coherency = 1;
-
- /*
- * Disable, clear and configure windows.
- */
- if (of_machine_is_compatible("marvell,armadaxp"))
- orion_config_wins(&addr_map_cfg, armada_xp_addr_map_info);
- else if (of_machine_is_compatible("marvell,armada370"))
- orion_config_wins(&addr_map_cfg, armada_370_addr_map_info);
- else {
- pr_err("Unsupported SoC\n");
- return -EINVAL;
- }
-
- /*
- * Setup MBUS dram target info.
- */
- orion_setup_cpu_mbus_target(&addr_map_cfg,
- sdram_addr_decoding_base);
- return 0;
-}
-
-/* Using a early_initcall is needed so that this initialization gets
- * done before the SMP initialization, which requires the BootROM to
- * be remapped. */
-early_initcall(armada_setup_cpu_mbus);
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index a5ea616d6d12..12d3655830d1 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -19,6 +19,7 @@
#include <linux/time-armada-370-xp.h>
#include <linux/clk/mvebu.h>
#include <linux/dma-mapping.h>
+#include <linux/mbus.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
@@ -48,12 +49,29 @@ void __init armada_370_xp_timer_and_clk_init(void)
void __init armada_370_xp_init_early(void)
{
+ char *mbus_soc_name;
+
/*
* Some Armada 370/XP devices allocate their coherent buffers
* from atomic context. Increase size of atomic coherent pool
* to make sure such the allocations won't fail.
*/
init_dma_coherent_pool_size(SZ_1M);
+
+ /*
+ * This initialization will be replaced by a DT-based
+ * initialization once the mvebu-mbus driver gains DT support.
+ */
+ if (of_machine_is_compatible("marvell,armada370"))
+ mbus_soc_name = "marvell,armada370-mbus";
+ else
+ mbus_soc_name = "marvell,armadaxp-mbus";
+
+ mvebu_mbus_init(mbus_soc_name,
+ ARMADA_370_XP_MBUS_WINS_BASE,
+ ARMADA_370_XP_MBUS_WINS_SIZE,
+ ARMADA_370_XP_SDRAM_WINS_BASE,
+ ARMADA_370_XP_SDRAM_WINS_SIZE);
}
static void __init armada_370_xp_dt_init(void)
diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h
index c6a7d74fddfe..2070e1b4f342 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.h
+++ b/arch/arm/mach-mvebu/armada-370-xp.h
@@ -16,9 +16,15 @@
#define __MACH_ARMADA_370_XP_H
#define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000
-#define ARMADA_370_XP_REGS_VIRT_BASE IOMEM(0xfeb00000)
+#define ARMADA_370_XP_REGS_VIRT_BASE IOMEM(0xfec00000)
#define ARMADA_370_XP_REGS_SIZE SZ_1M
+/* These defines can go away once mvebu-mbus has a DT binding */
+#define ARMADA_370_XP_MBUS_WINS_BASE (ARMADA_370_XP_REGS_PHYS_BASE + 0x20000)
+#define ARMADA_370_XP_MBUS_WINS_SIZE 0x100
+#define ARMADA_370_XP_SDRAM_WINS_BASE (ARMADA_370_XP_REGS_PHYS_BASE + 0x20180)
+#define ARMADA_370_XP_SDRAM_WINS_SIZE 0x20
+
#ifdef CONFIG_SMP
#include <linux/cpumask.h>
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
index fe16aaf7c19c..875ea748391c 100644
--- a/arch/arm/mach-mvebu/platsmp.c
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -21,6 +21,7 @@
#include <linux/smp.h>
#include <linux/clk.h>
#include <linux/of.h>
+#include <linux/mbus.h>
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
#include "common.h"
@@ -109,6 +110,7 @@ void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
set_secondary_cpus_clock();
flush_cache_all();
set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
+ mvebu_mbus_add_window("bootrom", 0xfff00000, SZ_1M);
}
struct smp_operations armada_xp_smp_ops __initdata = {
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 9e809a7c05c0..45da805fb236 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -1,4 +1,4 @@
-obj-y += common.o addr-map.o pci.o irq.o mpp.o
+obj-y += common.o pci.o irq.o mpp.o
obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o
obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o
obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
deleted file mode 100644
index b5efc0fd31cb..000000000000
--- a/arch/arm/mach-orion5x/addr-map.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * arch/arm/mach-orion5x/addr-map.c
- *
- * Address map functions for Marvell Orion 5x SoCs
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <plat/addr-map.h>
-#include "common.h"
-
-/*
- * The Orion has fully programmable address map. There's a separate address
- * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIe, USB,
- * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own
- * address decode windows that allow it to access any of the Orion resources.
- *
- * CPU address decoding --
- * Linux assumes that it is the boot loader that already setup the access to
- * DDR and internal registers.
- * Setup access to PCI and PCIe IO/MEM space is issued by this file.
- * Setup access to various devices located on the device bus interface (e.g.
- * flashes, RTC, etc) should be issued by machine-setup.c according to
- * specific board population (by using orion5x_setup_*_win()).
- *
- * Non-CPU Masters address decoding --
- * Unlike the CPU, we setup the access from Orion's master interfaces to DDR
- * banks only (the typical use case).
- * Setup access for each master to DDR is issued by platform device setup.
- */
-
-/*
- * Generic Address Decode Windows bit settings
- */
-#define TARGET_DEV_BUS 1
-#define TARGET_PCI 3
-#define TARGET_PCIE 4
-#define TARGET_SRAM 9
-#define ATTR_PCIE_MEM 0x59
-#define ATTR_PCIE_IO 0x51
-#define ATTR_PCIE_WA 0x79
-#define ATTR_PCI_MEM 0x59
-#define ATTR_PCI_IO 0x51
-#define ATTR_DEV_CS0 0x1e
-#define ATTR_DEV_CS1 0x1d
-#define ATTR_DEV_CS2 0x1b
-#define ATTR_DEV_BOOT 0xf
-#define ATTR_SRAM 0x0
-
-static int __initdata win_alloc_count;
-
-static int __init cpu_win_can_remap(const struct orion_addr_map_cfg *cfg,
- const int win)
-{
- u32 dev, rev;
-
- orion5x_pcie_id(&dev, &rev);
- if ((dev == MV88F5281_DEV_ID && win < 4)
- || (dev == MV88F5182_DEV_ID && win < 2)
- || (dev == MV88F5181_DEV_ID && win < 2)
- || (dev == MV88F6183_DEV_ID && win < 4))
- return 1;
-
- return 0;
-}
-
-/*
- * Description of the windows needed by the platform code
- */
-static struct orion_addr_map_cfg addr_map_cfg __initdata = {
- .num_wins = 8,
- .cpu_win_can_remap = cpu_win_can_remap,
- .bridge_virt_base = ORION5X_BRIDGE_VIRT_BASE,
-};
-
-static const struct __initdata orion_addr_map_info addr_map_info[] = {
- /*
- * Setup windows for PCI+PCIe IO+MEM space.
- */
- { 0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE,
- TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE
- },
- { 1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE,
- TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE
- },
- { 2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE,
- TARGET_PCIE, ATTR_PCIE_MEM, -1
- },
- { 3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE,
- TARGET_PCI, ATTR_PCI_MEM, -1
- },
- /* End marker */
- { -1, 0, 0, 0, 0, 0 }
-};
-
-void __init orion5x_setup_cpu_mbus_bridge(void)
-{
- /*
- * Disable, clear and configure windows.
- */
- orion_config_wins(&addr_map_cfg, addr_map_info);
- win_alloc_count = 4;
-
- /*
- * Setup MBUS dram target info.
- */
- orion_setup_cpu_mbus_target(&addr_map_cfg,
- (void __iomem *) ORION5X_DDR_WINDOW_CPU_BASE);
-}
-
-void __init orion5x_setup_dev_boot_win(u32 base, u32 size)
-{
- orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
- TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
-}
-
-void __init orion5x_setup_dev0_win(u32 base, u32 size)
-{
- orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
- TARGET_DEV_BUS, ATTR_DEV_CS0, -1);
-}
-
-void __init orion5x_setup_dev1_win(u32 base, u32 size)
-{
- orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
- TARGET_DEV_BUS, ATTR_DEV_CS1, -1);
-}
-
-void __init orion5x_setup_dev2_win(u32 base, u32 size)
-{
- orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
- TARGET_DEV_BUS, ATTR_DEV_CS2, -1);
-}
-
-void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
-{
- orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
- TARGET_PCIE, ATTR_PCIE_WA, -1);
-}
-
-void __init orion5x_setup_sram_win(void)
-{
- orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++,
- ORION5X_SRAM_PHYS_BASE, ORION5X_SRAM_SIZE,
- TARGET_SRAM, ATTR_SRAM, -1);
-}
diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c
index 94fbb815680c..b91002ca92f3 100644
--- a/arch/arm/mach-orion5x/board-dt.c
+++ b/arch/arm/mach-orion5x/board-dt.c
@@ -42,7 +42,7 @@ static void __init orion5x_dt_init(void)
/*
* Setup Orion address map
*/
- orion5x_setup_cpu_mbus_bridge();
+ orion5x_setup_wins();
/* Setup root of clk tree */
clk_init();
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 2075bf8e3d90..b97fd672e89d 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -35,7 +35,6 @@
#include <linux/platform_data/usb-ehci-orion.h>
#include <plat/time.h>
#include <plat/common.h>
-#include <plat/addr-map.h>
#include "common.h"
/*****************************************************************************
@@ -175,7 +174,8 @@ void __init orion5x_xor_init(void)
****************************************************************************/
static void __init orion5x_crypto_init(void)
{
- orion5x_setup_sram_win();
+ mvebu_mbus_add_window("sram", ORION5X_SRAM_PHYS_BASE,
+ ORION5X_SRAM_SIZE);
orion_crypto_init(ORION5X_CRYPTO_PHYS_BASE, ORION5X_SRAM_PHYS_BASE,
SZ_8K, IRQ_ORION5X_CESA);
}
@@ -194,6 +194,9 @@ void __init orion5x_wdt_init(void)
****************************************************************************/
void __init orion5x_init_early(void)
{
+ u32 rev, dev;
+ const char *mbus_soc_name;
+
orion_time_set_base(TIMER_VIRT_BASE);
/*
@@ -202,6 +205,46 @@ void __init orion5x_init_early(void)
* the allocations won't fail.
*/
init_dma_coherent_pool_size(SZ_1M);
+
+ /* Initialize the MBUS driver */
+ orion5x_pcie_id(&dev, &rev);
+ if (dev == MV88F5281_DEV_ID)
+ mbus_soc_name = "marvell,orion5x-88f5281-mbus";
+ else if (dev == MV88F5182_DEV_ID)
+ mbus_soc_name = "marvell,orion5x-88f5182-mbus";
+ else if (dev == MV88F5181_DEV_ID)
+ mbus_soc_name = "marvell,orion5x-88f5181-mbus";
+ else if (dev == MV88F6183_DEV_ID)
+ mbus_soc_name = "marvell,orion5x-88f6183-mbus";
+ else
+ mbus_soc_name = NULL;
+ mvebu_mbus_init(mbus_soc_name, ORION5X_BRIDGE_WINS_BASE,
+ ORION5X_BRIDGE_WINS_SZ,
+ ORION5X_DDR_WINS_BASE, ORION5X_DDR_WINS_SZ);
+}
+
+void orion5x_setup_wins(void)
+{
+ /*
+ * The PCIe windows will no longer be statically allocated
+ * here once Orion5x is migrated to the pci-mvebu driver.
+ */
+ mvebu_mbus_add_window_remap_flags("pcie0.0", ORION5X_PCIE_IO_PHYS_BASE,
+ ORION5X_PCIE_IO_SIZE,
+ ORION5X_PCIE_IO_BUS_BASE,
+ MVEBU_MBUS_PCI_IO);
+ mvebu_mbus_add_window_remap_flags("pcie0.0", ORION5X_PCIE_MEM_PHYS_BASE,
+ ORION5X_PCIE_MEM_SIZE,
+ MVEBU_MBUS_NO_REMAP,
+ MVEBU_MBUS_PCI_MEM);
+ mvebu_mbus_add_window_remap_flags("pci0.0", ORION5X_PCI_IO_PHYS_BASE,
+ ORION5X_PCI_IO_SIZE,
+ ORION5X_PCI_IO_BUS_BASE,
+ MVEBU_MBUS_PCI_IO);
+ mvebu_mbus_add_window_remap_flags("pci0.0", ORION5X_PCI_MEM_PHYS_BASE,
+ ORION5X_PCI_MEM_SIZE,
+ MVEBU_MBUS_NO_REMAP,
+ MVEBU_MBUS_PCI_MEM);
}
int orion5x_tclk;
@@ -283,7 +326,7 @@ void __init orion5x_init(void)
/*
* Setup Orion address map
*/
- orion5x_setup_cpu_mbus_bridge();
+ orion5x_setup_wins();
/* Setup root of clk tree */
clk_init();
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index e60345760283..cdaa01f3d186 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -17,18 +17,7 @@ void clk_init(void);
extern int orion5x_tclk;
extern void orion5x_timer_init(void);
-/*
- * Enumerations and functions for Orion windows mapping. Used by Orion core
- * functions to map its interfaces and by the machine-setup to map its on-
- * board devices. Details in /mach-orion/addr-map.c
- */
-void orion5x_setup_cpu_mbus_bridge(void);
-void orion5x_setup_dev_boot_win(u32 base, u32 size);
-void orion5x_setup_dev0_win(u32 base, u32 size);
-void orion5x_setup_dev1_win(u32 base, u32 size);
-void orion5x_setup_dev2_win(u32 base, u32 size);
-void orion5x_setup_pcie_wa_win(u32 base, u32 size);
-void orion5x_setup_sram_win(void);
+void orion5x_setup_wins(void);
void orion5x_ehci0_init(void);
void orion5x_ehci1_init(void);
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 57d0af74874d..16c88bbabc98 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -317,8 +317,8 @@ static void __init d2net_init(void)
d2net_sata_power_init();
orion5x_sata_init(&d2net_sata_data);
- orion5x_setup_dev_boot_win(D2NET_NOR_BOOT_BASE,
- D2NET_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window("devbus-boot", D2NET_NOR_BOOT_BASE,
+ D2NET_NOR_BOOT_SIZE);
platform_device_register(&d2net_nor_flash);
platform_device_register(&d2net_gpio_buttons);
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 76665640087b..4e1263da38bb 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -340,16 +340,19 @@ static void __init db88f5281_init(void)
orion5x_uart0_init();
orion5x_uart1_init();
- orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE,
- DB88F5281_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window("devbus-boot", DB88F5281_NOR_BOOT_BASE,
+ DB88F5281_NOR_BOOT_SIZE);
platform_device_register(&db88f5281_boot_flash);
- orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE);
+ mvebu_mbus_add_window("devbus-cs0", DB88F5281_7SEG_BASE,
+ DB88F5281_7SEG_SIZE);
- orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
+ mvebu_mbus_add_window("devbus-cs1", DB88F5281_NOR_BASE,
+ DB88F5281_NOR_SIZE);
platform_device_register(&db88f5281_nor_flash);
- orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
+ mvebu_mbus_add_window("devbus-cs2", DB88F5281_NAND_BASE,
+ DB88F5281_NAND_SIZE);
platform_device_register(&db88f5281_nand_flash);
i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 6eb1732757fd..9e6baf581ed3 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -611,7 +611,8 @@ static void __init dns323_init(void)
/* setup flash mapping
* CS3 holds a 8 MB Spansion S29GL064M90TFIR4
*/
- orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window("devbus-boot", DNS323_NOR_BOOT_BASE,
+ DNS323_NOR_BOOT_SIZE);
platform_device_register(&dns323_nor_flash);
/* Sort out LEDs, Buttons and i2c devices */
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
index d675e727803d..147615510dd0 100644
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -154,8 +154,8 @@ void __init edmini_v2_init(void)
orion5x_ehci0_init();
orion5x_eth_init(&edmini_v2_eth_data);
- orion5x_setup_dev_boot_win(EDMINI_V2_NOR_BOOT_BASE,
- EDMINI_V2_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window("devbus-boot", EDMINI_V2_NOR_BOOT_BASE,
+ EDMINI_V2_NOR_BOOT_SIZE);
platform_device_register(&edmini_v2_nor_flash);
pr_notice("edmini_v2: USB device port, flash write and power-off "
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index d265f5484a8e..b78ff3248868 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -66,8 +66,10 @@
* Orion Registers Map
******************************************************************************/
+#define ORION5X_DDR_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x00000)
+#define ORION5X_DDR_WINS_BASE (ORION5X_DDR_PHYS_BASE + 0x1500)
+#define ORION5X_DDR_WINS_SZ (0x10)
#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x00000)
-#define ORION5X_DDR_WINDOW_CPU_BASE (ORION5X_DDR_VIRT_BASE + 0x1500)
#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x10000)
#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x10000)
#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE + (x))
@@ -81,6 +83,8 @@
#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x20000)
#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x20000)
+#define ORION5X_BRIDGE_WINS_BASE (ORION5X_BRIDGE_PHYS_BASE)
+#define ORION5X_BRIDGE_WINS_SZ (0x80)
#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x30000)
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index b98403526218..aae10e4a917c 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -359,13 +359,13 @@ static void __init kurobox_pro_init(void)
orion5x_uart1_init();
orion5x_xor_init();
- orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
- KUROBOX_PRO_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window("devbus-boot", KUROBOX_PRO_NOR_BOOT_BASE,
+ KUROBOX_PRO_NOR_BOOT_SIZE);
platform_device_register(&kurobox_pro_nor_flash);
if (machine_is_kurobox_pro()) {
- orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE,
- KUROBOX_PRO_NAND_SIZE);
+ mvebu_mbus_add_window("devbus-cs0", KUROBOX_PRO_NAND_BASE,
+ KUROBOX_PRO_NAND_SIZE);
platform_device_register(&kurobox_pro_nand_flash);
}
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 044da5b6a6ae..24f4e14e5893 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -294,8 +294,8 @@ static void __init lschl_init(void)
orion5x_uart0_init();
orion5x_xor_init();
- orion5x_setup_dev_boot_win(LSCHL_NOR_BOOT_BASE,
- LSCHL_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window("devbus-boot", LSCHL_NOR_BOOT_BASE,
+ LSCHL_NOR_BOOT_SIZE);
platform_device_register(&lschl_nor_flash);
platform_device_register(&lschl_leds);
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index d49f93423f52..fc653bb41e78 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -243,8 +243,8 @@ static void __init ls_hgl_init(void)
orion5x_uart0_init();
orion5x_xor_init();
- orion5x_setup_dev_boot_win(LS_HGL_NOR_BOOT_BASE,
- LS_HGL_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window("devbus-boot", LS_HGL_NOR_BOOT_BASE,
+ LS_HGL_NOR_BOOT_SIZE);
platform_device_register(&ls_hgl_nor_flash);
platform_device_register(&ls_hgl_button_device);
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index 8e3965c6c0fe..18e66e617dc2 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -244,8 +244,8 @@ static void __init lsmini_init(void)
orion5x_uart0_init();
orion5x_xor_init();
- orion5x_setup_dev_boot_win(LSMINI_NOR_BOOT_BASE,
- LSMINI_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window("devbus-boot", LSMINI_NOR_BOOT_BASE,
+ LSMINI_NOR_BOOT_SIZE);
platform_device_register(&lsmini_nor_flash);
platform_device_register(&lsmini_button_device);
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 0ec94a1f2b16..827acbafc9dc 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -241,7 +241,8 @@ static void __init mss2_init(void)
orion5x_uart0_init();
orion5x_xor_init();
- orion5x_setup_dev_boot_win(MSS2_NOR_BOOT_BASE, MSS2_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window("devbus-boot", MSS2_NOR_BOOT_BASE,
+ MSS2_NOR_BOOT_SIZE);
platform_device_register(&mss2_nor_flash);
platform_device_register(&mss2_button_device);
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 18143f2a9093..92600ae2b4b6 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -204,7 +204,8 @@ static void __init mv2120_init(void)
orion5x_uart0_init();
orion5x_xor_init();
- orion5x_setup_dev_boot_win(MV2120_NOR_BOOT_BASE, MV2120_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window("devbus-boot", MV2120_NOR_BOOT_BASE,
+ MV2120_NOR_BOOT_SIZE);
platform_device_register(&mv2120_nor_flash);
platform_device_register(&mv2120_button_device);
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index 282e503b003e..dd0641a0d074 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -397,8 +397,8 @@ static void __init net2big_init(void)
net2big_sata_power_init();
orion5x_sata_init(&net2big_sata_data);
- orion5x_setup_dev_boot_win(NET2BIG_NOR_BOOT_BASE,
- NET2BIG_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window("devbus-boot", NET2BIG_NOR_BOOT_BASE,
+ NET2BIG_NOR_BOOT_SIZE);
platform_device_register(&net2big_nor_flash);
platform_device_register(&net2big_gpio_buttons);
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 973db98a3c27..503368023bb1 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -157,8 +157,11 @@ static int __init pcie_setup(struct pci_sys_data *sys)
if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) {
printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config "
"read transaction workaround\n");
- orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
- ORION5X_PCIE_WA_SIZE);
+ mvebu_mbus_add_window_remap_flags("pcie0.0",
+ ORION5X_PCIE_WA_PHYS_BASE,
+ ORION5X_PCIE_WA_SIZE,
+ MVEBU_MBUS_NO_REMAP,
+ MVEBU_MBUS_PCI_WA);
pcie_ops.read = pcie_rd_conf_wa;
}
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index d6e72f672afb..1c4498bf650a 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -123,8 +123,8 @@ static void __init rd88f5181l_fxo_init(void)
orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ);
orion5x_uart0_init();
- orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE,
- RD88F5181L_FXO_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window("devbus-boot", RD88F5181L_FXO_NOR_BOOT_BASE,
+ RD88F5181L_FXO_NOR_BOOT_SIZE);
platform_device_register(&rd88f5181l_fxo_nor_boot_flash);
}
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index c8b7913310e5..adabe34c4fc6 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -130,8 +130,8 @@ static void __init rd88f5181l_ge_init(void)
orion5x_i2c_init();
orion5x_uart0_init();
- orion5x_setup_dev_boot_win(RD88F5181L_GE_NOR_BOOT_BASE,
- RD88F5181L_GE_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window("devbus-boot", RD88F5181L_GE_NOR_BOOT_BASE,
+ RD88F5181L_GE_NOR_BOOT_SIZE);
platform_device_register(&rd88f5181l_ge_nor_boot_flash);
i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index f9e156725d7c..66e77ec91532 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -264,10 +264,11 @@ static void __init rd88f5182_init(void)
orion5x_uart0_init();
orion5x_xor_init();
- orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
- RD88F5182_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window("devbus-boot", RD88F5182_NOR_BOOT_BASE,
+ RD88F5182_NOR_BOOT_SIZE);
- orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
+ mvebu_mbus_add_window("devbus-cs1", RD88F5182_NOR_BASE,
+ RD88F5182_NOR_SIZE);
platform_device_register(&rd88f5182_nor_flash);
platform_device_register(&rd88f5182_gpio_leds);
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index acc0877ec1c9..a0bfa53e7556 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -329,8 +329,8 @@ static void __init tsp2_init(void)
/*
* Configure peripherals.
*/
- orion5x_setup_dev_boot_win(TSP2_NOR_BOOT_BASE,
- TSP2_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window("devbus-boot", TSP2_NOR_BOOT_BASE,
+ TSP2_NOR_BOOT_SIZE);
platform_device_register(&tsp2_nor_flash);
orion5x_ehci0_init();
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 9c17f0c2b488..80174f0f168e 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -286,8 +286,8 @@ static void __init qnap_ts209_init(void)
/*
* Configure peripherals.
*/
- orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
- QNAP_TS209_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window("devbus-boot", QNAP_TS209_NOR_BOOT_BASE,
+ QNAP_TS209_NOR_BOOT_SIZE);
platform_device_register(&qnap_ts209_nor_flash);
orion5x_ehci0_init();
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 8cc5ab6c503e..92592790d6da 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -277,8 +277,8 @@ static void __init qnap_ts409_init(void)
/*
* Configure peripherals.
*/
- orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE,
- QNAP_TS409_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window("devbus-boot", QNAP_TS409_NOR_BOOT_BASE,
+ QNAP_TS409_NOR_BOOT_SIZE);
platform_device_register(&qnap_ts409_nor_flash);
orion5x_ehci0_init();
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 66552ca7e05d..6b84863c018d 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -127,8 +127,8 @@ static void __init wnr854t_init(void)
orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ);
orion5x_uart0_init();
- orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE,
- WNR854T_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window("devbus-boot", WNR854T_NOR_BOOT_BASE,
+ WNR854T_NOR_BOOT_SIZE);
platform_device_register(&wnr854t_nor_flash);
}
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 2c5408e2e689..fae684bc54f2 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -213,8 +213,8 @@ static void __init wrt350n_v2_init(void)
orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ);
orion5x_uart0_init();
- orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
- WRT350N_V2_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window("devbus-boot", WRT350N_V2_NOR_BOOT_BASE,
+ WRT350N_V2_NOR_BOOT_SIZE);
platform_device_register(&wrt350n_v2_nor_flash);
platform_device_register(&wrt350n_v2_leds);
platform_device_register(&wrt350n_v2_button_device);
diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index 7d86bfbb5b06..31d5cd4d9787 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -26,6 +26,25 @@
#include <mach/clock.h>
#include <mach/common.h>
+/*
+ * MD1 = 1 MD1 = 0
+ * (PLLA = 1500) (PLLA = 1600)
+ * (MHz) (MHz)
+ *------------------------------------------------+--------------------
+ * clkz 1000 (2/3) 800 (1/2)
+ * clkzs 250 (1/6) 200 (1/8)
+ * clki 750 (1/2) 800 (1/2)
+ * clks 250 (1/6) 200 (1/8)
+ * clks1 125 (1/12) 100 (1/16)
+ * clks3 187.5 (1/8) 200 (1/8)
+ * clks4 93.7 (1/16) 100 (1/16)
+ * clkp 62.5 (1/24) 50 (1/32)
+ * clkg 62.5 (1/24) 66.6 (1/24)
+ * clkb, CLKOUT
+ * (MD2 = 0) 62.5 (1/24) 66.6 (1/24)
+ * (MD2 = 1) 41.6 (1/36) 50 (1/32)
+*/
+
#define MD(nr) BIT(nr)
#define FRQMR IOMEM(0xffc80014)
@@ -93,7 +112,7 @@ static struct clk *main_clks[] = {
};
enum { MSTP323, MSTP322, MSTP321, MSTP320,
- MSTP115,
+ MSTP115, MSTP114,
MSTP103, MSTP101, MSTP100,
MSTP030,
MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
@@ -107,6 +126,7 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP321] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 21, 0), /* SDHI2 */
[MSTP320] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 20, 0), /* SDHI3 */
[MSTP115] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 15, 0), /* SATA */
+ [MSTP114] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 14, 0), /* Ether */
[MSTP103] = SH_CLK_MSTP32(&clks_clk, MSTPCR1, 3, 0), /* DU */
[MSTP101] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 1, 0), /* USB2 */
[MSTP100] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 0, 0), /* USB0/1 */
@@ -143,6 +163,7 @@ static struct clk_lookup lookups[] = {
/* MSTP32 clocks */
CLKDEV_DEV_ID("sata_rcar", &mstp_clks[MSTP115]), /* SATA */
CLKDEV_DEV_ID("fc600000.sata", &mstp_clks[MSTP115]), /* SATA w/DT */
+ CLKDEV_DEV_ID("sh-eth", &mstp_clks[MSTP114]), /* Ether */
CLKDEV_DEV_ID("ehci-platform.1", &mstp_clks[MSTP101]), /* USB EHCI port2 */
CLKDEV_DEV_ID("ohci-platform.1", &mstp_clks[MSTP101]), /* USB OHCI port2 */
CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h
index 945299ed1638..188b295938a5 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h
@@ -3,6 +3,7 @@
#include <linux/sh_clk.h>
#include <linux/pm_domain.h>
+#include <linux/sh_eth.h>
struct platform_device;
@@ -31,6 +32,7 @@ extern void r8a7779_earlytimer_init(void);
extern void r8a7779_add_early_devices(void);
extern void r8a7779_add_standard_devices(void);
extern void r8a7779_add_standard_devices_dt(void);
+extern void r8a7779_add_ether_device(struct sh_eth_plat_data *pdata);
extern void r8a7779_clock_init(void);
extern void r8a7779_pinmux_init(void);
extern void r8a7779_pm_init(void);
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index a460ba3dedcb..b0b394842ea5 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -1,8 +1,9 @@
/*
* r8a7779 processor support
*
- * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2011, 2013 Renesas Solutions Corp.
* Copyright (C) 2011 Magnus Damm
+ * Copyright (C) 2013 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -393,6 +394,18 @@ static struct platform_device sata_device = {
},
};
+/* Ether */
+static struct resource ether_resources[] = {
+ {
+ .start = 0xfde00000,
+ .end = 0xfde003ff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = gic_iid(0xb4),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static struct platform_device *r8a7779_devices_dt[] __initdata = {
&scif0_device,
&scif1_device,
@@ -428,6 +441,14 @@ void __init r8a7779_add_standard_devices(void)
ARRAY_SIZE(r8a7779_late_devices));
}
+void __init r8a7779_add_ether_device(struct sh_eth_plat_data *pdata)
+{
+ platform_device_register_resndata(&platform_bus, "sh_eth", -1,
+ ether_resources,
+ ARRAY_SIZE(ether_resources),
+ pdata, sizeof(*pdata));
+}
+
/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
void __init __weak r8a7779_register_twd(void) { }
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index cf3226b041f5..c1d61f281e68 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -10,6 +10,7 @@ config ARCH_ZYNQ
select ICST
select MIGHT_HAVE_CACHE_L2X0
select USE_OF
+ select HAVE_SMP
select SPARSE_IRQ
select CADENCE_TTC_TIMER
help
diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile
index 320faedeb484..1b25d92ebf22 100644
--- a/arch/arm/mach-zynq/Makefile
+++ b/arch/arm/mach-zynq/Makefile
@@ -3,4 +3,8 @@
#
# Common support
-obj-y := common.o
+obj-y := common.o slcr.o
+CFLAGS_REMOVE_hotplug.o =-march=armv6k
+CFLAGS_hotplug.o =-Wa,-march=armv7-a -mcpu=cortex-a9
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 68e0907de5d0..5bfe7035b73d 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -33,20 +33,23 @@
#include <asm/mach-types.h>
#include <asm/page.h>
#include <asm/pgtable.h>
+#include <asm/smp_scu.h>
#include <asm/hardware/cache-l2x0.h>
#include "common.h"
+void __iomem *zynq_scu_base;
+
static struct of_device_id zynq_of_bus_ids[] __initdata = {
{ .compatible = "simple-bus", },
{}
};
/**
- * xilinx_init_machine() - System specific initialization, intended to be
- * called from board specific initialization.
+ * zynq_init_machine - System specific initialization, intended to be
+ * called from board specific initialization.
*/
-static void __init xilinx_init_machine(void)
+static void __init zynq_init_machine(void)
{
/*
* 64KB way size, 8-way associativity, parity disabled
@@ -56,50 +59,56 @@ static void __init xilinx_init_machine(void)
of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL);
}
-#define SCU_PERIPH_PHYS 0xF8F00000
-#define SCU_PERIPH_SIZE SZ_8K
-#define SCU_PERIPH_VIRT (VMALLOC_END - SCU_PERIPH_SIZE)
+static void __init zynq_timer_init(void)
+{
+ zynq_slcr_init();
+ clocksource_of_init();
+}
-static struct map_desc scu_desc __initdata = {
- .virtual = SCU_PERIPH_VIRT,
- .pfn = __phys_to_pfn(SCU_PERIPH_PHYS),
- .length = SCU_PERIPH_SIZE,
- .type = MT_DEVICE,
+static struct map_desc zynq_cortex_a9_scu_map __initdata = {
+ .length = SZ_256,
+ .type = MT_DEVICE,
};
-static void __init xilinx_zynq_timer_init(void)
+static void __init zynq_scu_map_io(void)
{
- struct device_node *np;
- void __iomem *slcr;
-
- np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-slcr");
- slcr = of_iomap(np, 0);
- WARN_ON(!slcr);
+ unsigned long base;
- xilinx_zynq_clocks_init(slcr);
-
- clocksource_of_init();
+ base = scu_a9_get_base();
+ zynq_cortex_a9_scu_map.pfn = __phys_to_pfn(base);
+ /* Expected address is in vmalloc area that's why simple assign here */
+ zynq_cortex_a9_scu_map.virtual = base;
+ iotable_init(&zynq_cortex_a9_scu_map, 1);
+ zynq_scu_base = (void __iomem *)base;
+ BUG_ON(!zynq_scu_base);
}
/**
- * xilinx_map_io() - Create memory mappings needed for early I/O.
+ * zynq_map_io - Create memory mappings needed for early I/O.
*/
-static void __init xilinx_map_io(void)
+static void __init zynq_map_io(void)
{
debug_ll_io_init();
- iotable_init(&scu_desc, 1);
+ zynq_scu_map_io();
+}
+
+static void zynq_system_reset(char mode, const char *cmd)
+{
+ zynq_slcr_system_reset();
}
-static const char *xilinx_dt_match[] = {
+static const char * const zynq_dt_match[] = {
"xlnx,zynq-zc702",
"xlnx,zynq-7000",
NULL
};
MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
- .map_io = xilinx_map_io,
+ .smp = smp_ops(zynq_smp_ops),
+ .map_io = zynq_map_io,
.init_irq = irqchip_init,
- .init_machine = xilinx_init_machine,
- .init_time = xilinx_zynq_timer_init,
- .dt_compat = xilinx_dt_match,
+ .init_machine = zynq_init_machine,
+ .init_time = zynq_timer_init,
+ .dt_compat = zynq_dt_match,
+ .restart = zynq_system_reset,
MACHINE_END
diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h
index 5050bb10bb12..fbbd0e21c404 100644
--- a/arch/arm/mach-zynq/common.h
+++ b/arch/arm/mach-zynq/common.h
@@ -17,4 +17,24 @@
#ifndef __MACH_ZYNQ_COMMON_H__
#define __MACH_ZYNQ_COMMON_H__
+extern int zynq_slcr_init(void);
+extern void zynq_slcr_system_reset(void);
+extern void zynq_slcr_cpu_stop(int cpu);
+extern void zynq_slcr_cpu_start(int cpu);
+
+#ifdef CONFIG_SMP
+extern void secondary_startup(void);
+extern char zynq_secondary_trampoline;
+extern char zynq_secondary_trampoline_jump;
+extern char zynq_secondary_trampoline_end;
+extern int __cpuinit zynq_cpun_start(u32 address, int cpu);
+extern struct smp_operations zynq_smp_ops __initdata;
+#endif
+
+extern void __iomem *zynq_slcr_base;
+extern void __iomem *zynq_scu_base;
+
+/* Hotplug */
+extern void zynq_platform_cpu_die(unsigned int cpu);
+
#endif
diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S
new file mode 100644
index 000000000000..d183cd234a9b
--- /dev/null
+++ b/arch/arm/mach-zynq/headsmp.S
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ * Copyright (c) 2012-2013 Xilinx
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+ __CPUINIT
+
+ENTRY(zynq_secondary_trampoline)
+ ldr r0, [pc]
+ bx r0
+.globl zynq_secondary_trampoline_jump
+zynq_secondary_trampoline_jump:
+ /* Space for jumping address */
+ .word /* cpu 1 */
+.globl zynq_secondary_trampoline_end
+zynq_secondary_trampoline_end:
+
+ENDPROC(zynq_secondary_trampoline)
diff --git a/arch/arm/mach-zynq/hotplug.c b/arch/arm/mach-zynq/hotplug.c
new file mode 100644
index 000000000000..c89672bd1de2
--- /dev/null
+++ b/arch/arm/mach-zynq/hotplug.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2012-2013 Xilinx
+ *
+ * based on linux/arch/arm/mach-realview/hotplug.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include "common.h"
+
+static inline void zynq_cpu_enter_lowpower(void)
+{
+ unsigned int v;
+
+ flush_cache_all();
+ asm volatile(
+ " mcr p15, 0, %1, c7, c5, 0\n"
+ " dsb\n"
+ /*
+ * Turn off coherency
+ */
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " bic %0, %0, #0x40\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ " mrc p15, 0, %0, c1, c0, 0\n"
+ " bic %0, %0, %2\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ : "=&r" (v)
+ : "r" (0), "Ir" (CR_C)
+ : "cc");
+}
+
+static inline void zynq_cpu_leave_lowpower(void)
+{
+ unsigned int v;
+
+ asm volatile(
+ " mrc p15, 0, %0, c1, c0, 0\n"
+ " orr %0, %0, %1\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " orr %0, %0, #0x40\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ : "=&r" (v)
+ : "Ir" (CR_C)
+ : "cc");
+}
+
+static inline void zynq_platform_do_lowpower(unsigned int cpu, int *spurious)
+{
+ /*
+ * there is no power-control hardware on this platform, so all
+ * we can do is put the core into WFI; this is safe as the calling
+ * code will have already disabled interrupts
+ */
+ for (;;) {
+ dsb();
+ wfi();
+
+ /*
+ * Getting here, means that we have come out of WFI without
+ * having been woken up - this shouldn't happen
+ *
+ * Just note it happening - when we're woken, we can report
+ * its occurrence.
+ */
+ (*spurious)++;
+ }
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void zynq_platform_cpu_die(unsigned int cpu)
+{
+ int spurious = 0;
+
+ /*
+ * we're ready for shutdown now, so do it
+ */
+ zynq_cpu_enter_lowpower();
+ zynq_platform_do_lowpower(cpu, &spurious);
+
+ /*
+ * bring this CPU back into the world of cache
+ * coherency, and then restore interrupts
+ */
+ zynq_cpu_leave_lowpower();
+
+ if (spurious)
+ pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
+}
diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c
new file mode 100644
index 000000000000..5fc167e07619
--- /dev/null
+++ b/arch/arm/mach-zynq/platsmp.c
@@ -0,0 +1,136 @@
+/*
+ * This file contains Xilinx specific SMP code, used to start up
+ * the second processor.
+ *
+ * Copyright (C) 2011-2013 Xilinx
+ *
+ * based on linux/arch/arm/mach-realview/platsmp.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/export.h>
+#include <linux/jiffies.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/cacheflush.h>
+#include <asm/smp_scu.h>
+#include <linux/irqchip/arm-gic.h>
+#include "common.h"
+
+/*
+ * Store number of cores in the system
+ * Because of scu_get_core_count() must be in __init section and can't
+ * be called from zynq_cpun_start() because it is in __cpuinit section.
+ */
+static int ncores;
+
+int __cpuinit zynq_cpun_start(u32 address, int cpu)
+{
+ u32 trampoline_code_size = &zynq_secondary_trampoline_end -
+ &zynq_secondary_trampoline;
+
+ if (cpu > ncores) {
+ pr_warn("CPU No. is not available in the system\n");
+ return -1;
+ }
+
+ /* MS: Expectation that SLCR are directly map and accessible */
+ /* Not possible to jump to non aligned address */
+ if (!(address & 3) && (!address || (address >= trampoline_code_size))) {
+ /* Store pointer to ioremap area which points to address 0x0 */
+ static u8 __iomem *zero;
+ u32 trampoline_size = &zynq_secondary_trampoline_jump -
+ &zynq_secondary_trampoline;
+
+ zynq_slcr_cpu_stop(cpu);
+
+ if (__pa(PAGE_OFFSET)) {
+ zero = ioremap(0, trampoline_code_size);
+ if (!zero) {
+ pr_warn("BOOTUP jump vectors not accessible\n");
+ return -1;
+ }
+ } else {
+ zero = (__force u8 __iomem *)PAGE_OFFSET;
+ }
+
+ /*
+ * This is elegant way how to jump to any address
+ * 0x0: Load address at 0x8 to r0
+ * 0x4: Jump by mov instruction
+ * 0x8: Jumping address
+ */
+ memcpy((__force void *)zero, &zynq_secondary_trampoline,
+ trampoline_size);
+ writel(address, zero + trampoline_size);
+
+ flush_cache_all();
+ outer_flush_range(0, trampoline_code_size);
+ smp_wmb();
+
+ if (__pa(PAGE_OFFSET))
+ iounmap(zero);
+
+ zynq_slcr_cpu_start(cpu);
+
+ return 0;
+ }
+
+ pr_warn("Can't start CPU%d: Wrong starting address %x\n", cpu, address);
+
+ return -1;
+}
+EXPORT_SYMBOL(zynq_cpun_start);
+
+static int __cpuinit zynq_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
+{
+ return zynq_cpun_start(virt_to_phys(secondary_startup), cpu);
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+static void __init zynq_smp_init_cpus(void)
+{
+ int i;
+
+ ncores = scu_get_core_count(zynq_scu_base);
+
+ for (i = 0; i < ncores && i < CONFIG_NR_CPUS; i++)
+ set_cpu_possible(i, true);
+}
+
+static void __init zynq_smp_prepare_cpus(unsigned int max_cpus)
+{
+ int i;
+
+ /*
+ * Initialise the present map, which describes the set of CPUs
+ * actually populated at the present time.
+ */
+ for (i = 0; i < max_cpus; i++)
+ set_cpu_present(i, true);
+
+ scu_enable(zynq_scu_base);
+}
+
+struct smp_operations zynq_smp_ops __initdata = {
+ .smp_init_cpus = zynq_smp_init_cpus,
+ .smp_prepare_cpus = zynq_smp_prepare_cpus,
+ .smp_boot_secondary = zynq_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = zynq_platform_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
new file mode 100644
index 000000000000..c70969b9c258
--- /dev/null
+++ b/arch/arm/mach-zynq/slcr.c
@@ -0,0 +1,125 @@
+/*
+ * Xilinx SLCR driver
+ *
+ * Copyright (c) 2011-2013 Xilinx Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
+ * 02139, USA.
+ */
+
+#include <linux/export.h>
+#include <linux/io.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/uaccess.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/clk/zynq.h>
+#include "common.h"
+
+#define SLCR_UNLOCK_MAGIC 0xDF0D
+#define SLCR_UNLOCK 0x8 /* SCLR unlock register */
+
+#define SLCR_PS_RST_CTRL_OFFSET 0x200 /* PS Software Reset Control */
+
+#define SLCR_A9_CPU_CLKSTOP 0x10
+#define SLCR_A9_CPU_RST 0x1
+
+#define SLCR_A9_CPU_RST_CTRL 0x244 /* CPU Software Reset Control */
+#define SLCR_REBOOT_STATUS 0x258 /* PS Reboot Status */
+
+void __iomem *zynq_slcr_base;
+
+/**
+ * zynq_slcr_system_reset - Reset the entire system.
+ */
+void zynq_slcr_system_reset(void)
+{
+ u32 reboot;
+
+ /*
+ * Unlock the SLCR then reset the system.
+ * Note that this seems to require raw i/o
+ * functions or there's a lockup?
+ */
+ writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK);
+
+ /*
+ * Clear 0x0F000000 bits of reboot status register to workaround
+ * the FSBL not loading the bitstream after soft-reboot
+ * This is a temporary solution until we know more.
+ */
+ reboot = readl(zynq_slcr_base + SLCR_REBOOT_STATUS);
+ writel(reboot & 0xF0FFFFFF, zynq_slcr_base + SLCR_REBOOT_STATUS);
+ writel(1, zynq_slcr_base + SLCR_PS_RST_CTRL_OFFSET);
+}
+
+/**
+ * zynq_slcr_cpu_start - Start cpu
+ * @cpu: cpu number
+ */
+void zynq_slcr_cpu_start(int cpu)
+{
+ /* enable CPUn */
+ writel(SLCR_A9_CPU_CLKSTOP << cpu,
+ zynq_slcr_base + SLCR_A9_CPU_RST_CTRL);
+ /* enable CLK for CPUn */
+ writel(0x0 << cpu, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL);
+}
+
+/**
+ * zynq_slcr_cpu_stop - Stop cpu
+ * @cpu: cpu number
+ */
+void zynq_slcr_cpu_stop(int cpu)
+{
+ /* stop CLK and reset CPUn */
+ writel((SLCR_A9_CPU_CLKSTOP | SLCR_A9_CPU_RST) << cpu,
+ zynq_slcr_base + SLCR_A9_CPU_RST_CTRL);
+}
+
+/**
+ * zynq_slcr_init
+ * Returns 0 on success, negative errno otherwise.
+ *
+ * Called early during boot from platform code to remap SLCR area.
+ */
+int __init zynq_slcr_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-slcr");
+ if (!np) {
+ pr_err("%s: no slcr node found\n", __func__);
+ BUG();
+ }
+
+ zynq_slcr_base = of_iomap(np, 0);
+ if (!zynq_slcr_base) {
+ pr_err("%s: Unable to map I/O memory\n", __func__);
+ BUG();
+ }
+
+ /* unlock the SLCR so that registers can be changed */
+ writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK);
+
+ pr_info("%s mapped to %p\n", np->name, zynq_slcr_base);
+
+ xilinx_zynq_clocks_init(zynq_slcr_base);
+
+ of_node_put(np);
+
+ return 0;
+}
diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile
index ad97400ba3ad..2eca54b65906 100644
--- a/arch/arm/plat-orion/Makefile
+++ b/arch/arm/plat-orion/Makefile
@@ -3,12 +3,6 @@
#
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-obj-$(CONFIG_ARCH_MVEBU) += addr-map.o
-obj-$(CONFIG_ARCH_KIRKWOOD) += addr-map.o
-obj-$(CONFIG_ARCH_DOVE) += addr-map.o
-obj-$(CONFIG_ARCH_ORION5X) += addr-map.o
-obj-$(CONFIG_ARCH_MV78XX0) += addr-map.o
-
orion-gpio-$(CONFIG_GENERIC_GPIO) += gpio.o
obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o time.o common.o mpp.o
obj-$(CONFIG_PLAT_ORION_LEGACY) += $(orion-gpio-y)
diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c
deleted file mode 100644
index 807ac8e5cbc0..000000000000
--- a/arch/arm/plat-orion/addr-map.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * arch/arm/plat-orion/addr-map.c
- *
- * Address map functions for Marvell Orion based SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <plat/addr-map.h>
-
-struct mbus_dram_target_info orion_mbus_dram_info;
-
-const struct mbus_dram_target_info *mv_mbus_dram_info(void)
-{
- return &orion_mbus_dram_info;
-}
-EXPORT_SYMBOL_GPL(mv_mbus_dram_info);
-
-/*
- * DDR target is the same on all Orion platforms.
- */
-#define TARGET_DDR 0
-
-/*
- * Helpers to get DDR bank info
- */
-#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3))
-#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3))
-
-/*
- * CPU Address Decode Windows registers
- */
-#define WIN_CTRL_OFF 0x0000
-#define WIN_BASE_OFF 0x0004
-#define WIN_REMAP_LO_OFF 0x0008
-#define WIN_REMAP_HI_OFF 0x000c
-
-#define ATTR_HW_COHERENCY (0x1 << 4)
-
-/*
- * Default implementation
- */
-static void __init __iomem *
-orion_win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
-{
- return cfg->bridge_virt_base + (win << 4);
-}
-
-/*
- * Default implementation
- */
-static int __init orion_cpu_win_can_remap(const struct orion_addr_map_cfg *cfg,
- const int win)
-{
- if (win < cfg->remappable_wins)
- return 1;
-
- return 0;
-}
-
-void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg,
- const int win, const u32 base,
- const u32 size, const u8 target,
- const u8 attr, const int remap)
-{
- void __iomem *addr = cfg->win_cfg_base(cfg, win);
- u32 ctrl, base_high, remap_addr;
-
- if (win >= cfg->num_wins) {
- printk(KERN_ERR "setup_cpu_win: trying to allocate window "
- "%d when only %d allowed\n", win, cfg->num_wins);
- }
-
- base_high = base & 0xffff0000;
- ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
-
- writel(base_high, addr + WIN_BASE_OFF);
- writel(ctrl, addr + WIN_CTRL_OFF);
- if (cfg->cpu_win_can_remap(cfg, win)) {
- if (remap < 0)
- remap_addr = base;
- else
- remap_addr = remap;
- writel(remap_addr & 0xffff0000, addr + WIN_REMAP_LO_OFF);
- writel(0, addr + WIN_REMAP_HI_OFF);
- }
-}
-
-/*
- * Configure a number of windows.
- */
-static void __init orion_setup_cpu_wins(const struct orion_addr_map_cfg * cfg,
- const struct orion_addr_map_info *info)
-{
- while (info->win != -1) {
- orion_setup_cpu_win(cfg, info->win, info->base, info->size,
- info->target, info->attr, info->remap);
- info++;
- }
-}
-
-static void __init orion_disable_wins(const struct orion_addr_map_cfg * cfg)
-{
- void __iomem *addr;
- int i;
-
- for (i = 0; i < cfg->num_wins; i++) {
- addr = cfg->win_cfg_base(cfg, i);
-
- writel(0, addr + WIN_BASE_OFF);
- writel(0, addr + WIN_CTRL_OFF);
- if (cfg->cpu_win_can_remap(cfg, i)) {
- writel(0, addr + WIN_REMAP_LO_OFF);
- writel(0, addr + WIN_REMAP_HI_OFF);
- }
- }
-}
-
-/*
- * Disable, clear and configure windows.
- */
-void __init orion_config_wins(struct orion_addr_map_cfg * cfg,
- const struct orion_addr_map_info *info)
-{
- if (!cfg->cpu_win_can_remap)
- cfg->cpu_win_can_remap = orion_cpu_win_can_remap;
-
- if (!cfg->win_cfg_base)
- cfg->win_cfg_base = orion_win_cfg_base;
-
- orion_disable_wins(cfg);
-
- if (info)
- orion_setup_cpu_wins(cfg, info);
-}
-
-/*
- * Setup MBUS dram target info.
- */
-void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
- const void __iomem *ddr_window_cpu_base)
-{
- int i;
- int cs;
-
- orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
-
- for (i = 0, cs = 0; i < 4; i++) {
- u32 base = readl(ddr_window_cpu_base + DDR_BASE_CS_OFF(i));
- u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i));
-
- /*
- * We only take care of entries for which the chip
- * select is enabled, and that don't have high base
- * address bits set (devices can only access the first
- * 32 bits of the memory).
- */
- if ((size & 1) && !(base & 0xF)) {
- struct mbus_dram_window *w;
-
- w = &orion_mbus_dram_info.cs[cs++];
- w->cs_index = i;
- w->mbus_attr = 0xf & ~(1 << i);
- if (cfg->hw_io_coherency)
- w->mbus_attr |= ATTR_HW_COHERENCY;
- w->base = base & 0xffff0000;
- w->size = (size | 0x0000ffff) + 1;
- }
- }
- orion_mbus_dram_info.num_cs = cs;
-}
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index c29ee7ea200b..e39c2ba6e2fb 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -439,6 +439,64 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
}
}
+#ifdef CONFIG_DEBUG_FS
+#include <linux/seq_file.h>
+
+static void orion_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+ struct orion_gpio_chip *ochip =
+ container_of(chip, struct orion_gpio_chip, chip);
+ u32 out, io_conf, blink, in_pol, data_in, cause, edg_msk, lvl_msk;
+ int i;
+
+ out = readl_relaxed(GPIO_OUT(ochip));
+ io_conf = readl_relaxed(GPIO_IO_CONF(ochip));
+ blink = readl_relaxed(GPIO_BLINK_EN(ochip));
+ in_pol = readl_relaxed(GPIO_IN_POL(ochip));
+ data_in = readl_relaxed(GPIO_DATA_IN(ochip));
+ cause = readl_relaxed(GPIO_EDGE_CAUSE(ochip));
+ edg_msk = readl_relaxed(GPIO_EDGE_MASK(ochip));
+ lvl_msk = readl_relaxed(GPIO_LEVEL_MASK(ochip));
+
+ for (i = 0; i < chip->ngpio; i++) {
+ const char *label;
+ u32 msk;
+ bool is_out;
+
+ label = gpiochip_is_requested(chip, i);
+ if (!label)
+ continue;
+
+ msk = 1 << i;
+ is_out = !(io_conf & msk);
+
+ seq_printf(s, " gpio-%-3d (%-20.20s)", chip->base + i, label);
+
+ if (is_out) {
+ seq_printf(s, " out %s %s\n",
+ out & msk ? "hi" : "lo",
+ blink & msk ? "(blink )" : "");
+ continue;
+ }
+
+ seq_printf(s, " in %s (act %s) - IRQ",
+ (data_in ^ in_pol) & msk ? "hi" : "lo",
+ in_pol & msk ? "lo" : "hi");
+ if (!((edg_msk | lvl_msk) & msk)) {
+ seq_printf(s, " disabled\n");
+ continue;
+ }
+ if (edg_msk & msk)
+ seq_printf(s, " edge ");
+ if (lvl_msk & msk)
+ seq_printf(s, " level");
+ seq_printf(s, " (%s)\n", cause & msk ? "pending" : "clear ");
+ }
+}
+#else
+#define orion_gpio_dbg_show NULL
+#endif
+
void __init orion_gpio_init(struct device_node *np,
int gpio_base, int ngpio,
void __iomem *base, int mask_offset,
@@ -471,6 +529,7 @@ void __init orion_gpio_init(struct device_node *np,
#ifdef CONFIG_OF
ochip->chip.of_node = np;
#endif
+ ochip->chip.dbg_show = orion_gpio_dbg_show;
spin_lock_init(&ochip->lock);
ochip->base = (void __iomem *)base;
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 0f51ed687dc8..b05ecab915c4 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -4,6 +4,13 @@
menu "Bus devices"
+config MVEBU_MBUS
+ bool
+ depends on PLAT_ORION
+ help
+ Driver needed for the MBus configuration on Marvell EBU SoCs
+ (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP).
+
config OMAP_OCP2SCP
tristate "OMAP OCP2SCP DRIVER"
depends on ARCH_OMAP2PLUS
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index 45d997c85453..3c7b53c12091 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -2,6 +2,7 @@
# Makefile for the bus drivers.
#
+obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o
obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o
# Interconnect bus driver for OMAP SoCs.
diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c
new file mode 100644
index 000000000000..8740f46b4d0d
--- /dev/null
+++ b/drivers/bus/mvebu-mbus.c
@@ -0,0 +1,870 @@
+/*
+ * Address map functions for Marvell EBU SoCs (Kirkwood, Armada
+ * 370/XP, Dove, Orion5x and MV78xx0)
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The Marvell EBU SoCs have a configurable physical address space:
+ * the physical address at which certain devices (PCIe, NOR, NAND,
+ * etc.) sit can be configured. The configuration takes place through
+ * two sets of registers:
+ *
+ * - One to configure the access of the CPU to the devices. Depending
+ * on the families, there are between 8 and 20 configurable windows,
+ * each can be use to create a physical memory window that maps to a
+ * specific device. Devices are identified by a tuple (target,
+ * attribute).
+ *
+ * - One to configure the access to the CPU to the SDRAM. There are
+ * either 2 (for Dove) or 4 (for other families) windows to map the
+ * SDRAM into the physical address space.
+ *
+ * This driver:
+ *
+ * - Reads out the SDRAM address decoding windows at initialization
+ * time, and fills the mvebu_mbus_dram_info structure with these
+ * informations. The exported function mv_mbus_dram_info() allow
+ * device drivers to get those informations related to the SDRAM
+ * address decoding windows. This is because devices also have their
+ * own windows (configured through registers that are part of each
+ * device register space), and therefore the drivers for Marvell
+ * devices have to configure those device -> SDRAM windows to ensure
+ * that DMA works properly.
+ *
+ * - Provides an API for platform code or device drivers to
+ * dynamically add or remove address decoding windows for the CPU ->
+ * device accesses. This API is mvebu_mbus_add_window(),
+ * mvebu_mbus_add_window_remap_flags() and
+ * mvebu_mbus_del_window(). Since the (target, attribute) values
+ * differ from one SoC family to another, the API uses a 'const char
+ * *' string to identify devices, and this driver is responsible for
+ * knowing the mapping between the name of a device and its
+ * corresponding (target, attribute) in the current SoC family.
+ *
+ * - Provides a debugfs interface in /sys/kernel/debug/mvebu-mbus/ to
+ * see the list of CPU -> SDRAM windows and their configuration
+ * (file 'sdram') and the list of CPU -> devices windows and their
+ * configuration (file 'devices').
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/debugfs.h>
+
+/*
+ * DDR target is the same on all platforms.
+ */
+#define TARGET_DDR 0
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define WIN_CTRL_OFF 0x0000
+#define WIN_CTRL_ENABLE BIT(0)
+#define WIN_CTRL_TGT_MASK 0xf0
+#define WIN_CTRL_TGT_SHIFT 4
+#define WIN_CTRL_ATTR_MASK 0xff00
+#define WIN_CTRL_ATTR_SHIFT 8
+#define WIN_CTRL_SIZE_MASK 0xffff0000
+#define WIN_CTRL_SIZE_SHIFT 16
+#define WIN_BASE_OFF 0x0004
+#define WIN_BASE_LOW 0xffff0000
+#define WIN_BASE_HIGH 0xf
+#define WIN_REMAP_LO_OFF 0x0008
+#define WIN_REMAP_LOW 0xffff0000
+#define WIN_REMAP_HI_OFF 0x000c
+
+#define ATTR_HW_COHERENCY (0x1 << 4)
+
+#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3))
+#define DDR_BASE_CS_HIGH_MASK 0xf
+#define DDR_BASE_CS_LOW_MASK 0xff000000
+#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3))
+#define DDR_SIZE_ENABLED BIT(0)
+#define DDR_SIZE_CS_MASK 0x1c
+#define DDR_SIZE_CS_SHIFT 2
+#define DDR_SIZE_MASK 0xff000000
+
+#define DOVE_DDR_BASE_CS_OFF(n) ((n) << 4)
+
+struct mvebu_mbus_mapping {
+ const char *name;
+ u8 target;
+ u8 attr;
+ u8 attrmask;
+};
+
+/*
+ * Masks used for the 'attrmask' field of mvebu_mbus_mapping. They
+ * allow to get the real attribute value, discarding the special bits
+ * used to select a PCI MEM region or a PCI WA region. This allows the
+ * debugfs code to reverse-match the name of a device from its
+ * target/attr values.
+ *
+ * For all devices except PCI, all bits of 'attr' must be
+ * considered. For most SoCs, only bit 3 should be ignored (it allows
+ * to select between PCI MEM and PCI I/O). On Orion5x however, there
+ * is the special bit 5 to select a PCI WA region.
+ */
+#define MAPDEF_NOMASK 0xff
+#define MAPDEF_PCIMASK 0xf7
+#define MAPDEF_ORIONPCIMASK 0xd7
+
+/* Macro used to define one mvebu_mbus_mapping entry */
+#define MAPDEF(__n, __t, __a, __m) \
+ { .name = __n, .target = __t, .attr = __a, .attrmask = __m }
+
+struct mvebu_mbus_state;
+
+struct mvebu_mbus_soc_data {
+ unsigned int num_wins;
+ unsigned int num_remappable_wins;
+ unsigned int (*win_cfg_offset)(const int win);
+ void (*setup_cpu_target)(struct mvebu_mbus_state *s);
+ int (*show_cpu_target)(struct mvebu_mbus_state *s,
+ struct seq_file *seq, void *v);
+ const struct mvebu_mbus_mapping *map;
+};
+
+struct mvebu_mbus_state {
+ void __iomem *mbuswins_base;
+ void __iomem *sdramwins_base;
+ struct dentry *debugfs_root;
+ struct dentry *debugfs_sdram;
+ struct dentry *debugfs_devs;
+ const struct mvebu_mbus_soc_data *soc;
+ int hw_io_coherency;
+};
+
+static struct mvebu_mbus_state mbus_state;
+
+static struct mbus_dram_target_info mvebu_mbus_dram_info;
+const struct mbus_dram_target_info *mv_mbus_dram_info(void)
+{
+ return &mvebu_mbus_dram_info;
+}
+EXPORT_SYMBOL_GPL(mv_mbus_dram_info);
+
+/*
+ * Functions to manipulate the address decoding windows
+ */
+
+static void mvebu_mbus_read_window(struct mvebu_mbus_state *mbus,
+ int win, int *enabled, u64 *base,
+ u32 *size, u8 *target, u8 *attr,
+ u64 *remap)
+{
+ void __iomem *addr = mbus->mbuswins_base +
+ mbus->soc->win_cfg_offset(win);
+ u32 basereg = readl(addr + WIN_BASE_OFF);
+ u32 ctrlreg = readl(addr + WIN_CTRL_OFF);
+
+ if (!(ctrlreg & WIN_CTRL_ENABLE)) {
+ *enabled = 0;
+ return;
+ }
+
+ *enabled = 1;
+ *base = ((u64)basereg & WIN_BASE_HIGH) << 32;
+ *base |= (basereg & WIN_BASE_LOW);
+ *size = (ctrlreg | ~WIN_CTRL_SIZE_MASK) + 1;
+
+ if (target)
+ *target = (ctrlreg & WIN_CTRL_TGT_MASK) >> WIN_CTRL_TGT_SHIFT;
+
+ if (attr)
+ *attr = (ctrlreg & WIN_CTRL_ATTR_MASK) >> WIN_CTRL_ATTR_SHIFT;
+
+ if (remap) {
+ if (win < mbus->soc->num_remappable_wins) {
+ u32 remap_low = readl(addr + WIN_REMAP_LO_OFF);
+ u32 remap_hi = readl(addr + WIN_REMAP_HI_OFF);
+ *remap = ((u64)remap_hi << 32) | remap_low;
+ } else
+ *remap = 0;
+ }
+}
+
+static void mvebu_mbus_disable_window(struct mvebu_mbus_state *mbus,
+ int win)
+{
+ void __iomem *addr;
+
+ addr = mbus->mbuswins_base + mbus->soc->win_cfg_offset(win);
+
+ writel(0, addr + WIN_BASE_OFF);
+ writel(0, addr + WIN_CTRL_OFF);
+ if (win < mbus->soc->num_remappable_wins) {
+ writel(0, addr + WIN_REMAP_LO_OFF);
+ writel(0, addr + WIN_REMAP_HI_OFF);
+ }
+}
+
+/* Checks whether the given window number is available */
+static int mvebu_mbus_window_is_free(struct mvebu_mbus_state *mbus,
+ const int win)
+{
+ void __iomem *addr = mbus->mbuswins_base +
+ mbus->soc->win_cfg_offset(win);
+ u32 ctrl = readl(addr + WIN_CTRL_OFF);
+ return !(ctrl & WIN_CTRL_ENABLE);
+}
+
+/*
+ * Checks whether the given (base, base+size) area doesn't overlap an
+ * existing region
+ */
+static int mvebu_mbus_window_conflicts(struct mvebu_mbus_state *mbus,
+ phys_addr_t base, size_t size,
+ u8 target, u8 attr)
+{
+ u64 end = (u64)base + size;
+ int win;
+
+ for (win = 0; win < mbus->soc->num_wins; win++) {
+ u64 wbase, wend;
+ u32 wsize;
+ u8 wtarget, wattr;
+ int enabled;
+
+ mvebu_mbus_read_window(mbus, win,
+ &enabled, &wbase, &wsize,
+ &wtarget, &wattr, NULL);
+
+ if (!enabled)
+ continue;
+
+ wend = wbase + wsize;
+
+ /*
+ * Check if the current window overlaps with the
+ * proposed physical range
+ */
+ if ((u64)base < wend && end > wbase)
+ return 0;
+
+ /*
+ * Check if target/attribute conflicts
+ */
+ if (target == wtarget && attr == wattr)
+ return 0;
+ }
+
+ return 1;
+}
+
+static int mvebu_mbus_find_window(struct mvebu_mbus_state *mbus,
+ phys_addr_t base, size_t size)
+{
+ int win;
+
+ for (win = 0; win < mbus->soc->num_wins; win++) {
+ u64 wbase;
+ u32 wsize;
+ int enabled;
+
+ mvebu_mbus_read_window(mbus, win,
+ &enabled, &wbase, &wsize,
+ NULL, NULL, NULL);
+
+ if (!enabled)
+ continue;
+
+ if (base == wbase && size == wsize)
+ return win;
+ }
+
+ return -ENODEV;
+}
+
+static int mvebu_mbus_setup_window(struct mvebu_mbus_state *mbus,
+ int win, phys_addr_t base, size_t size,
+ phys_addr_t remap, u8 target,
+ u8 attr)
+{
+ void __iomem *addr = mbus->mbuswins_base +
+ mbus->soc->win_cfg_offset(win);
+ u32 ctrl, remap_addr;
+
+ ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) |
+ (attr << WIN_CTRL_ATTR_SHIFT) |
+ (target << WIN_CTRL_TGT_SHIFT) |
+ WIN_CTRL_ENABLE;
+
+ writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF);
+ writel(ctrl, addr + WIN_CTRL_OFF);
+ if (win < mbus->soc->num_remappable_wins) {
+ if (remap == MVEBU_MBUS_NO_REMAP)
+ remap_addr = base;
+ else
+ remap_addr = remap;
+ writel(remap_addr & WIN_REMAP_LOW, addr + WIN_REMAP_LO_OFF);
+ writel(0, addr + WIN_REMAP_HI_OFF);
+ }
+
+ return 0;
+}
+
+static int mvebu_mbus_alloc_window(struct mvebu_mbus_state *mbus,
+ phys_addr_t base, size_t size,
+ phys_addr_t remap, u8 target,
+ u8 attr)
+{
+ int win;
+
+ if (remap == MVEBU_MBUS_NO_REMAP) {
+ for (win = mbus->soc->num_remappable_wins;
+ win < mbus->soc->num_wins; win++)
+ if (mvebu_mbus_window_is_free(mbus, win))
+ return mvebu_mbus_setup_window(mbus, win, base,
+ size, remap,
+ target, attr);
+ }
+
+
+ for (win = 0; win < mbus->soc->num_wins; win++)
+ if (mvebu_mbus_window_is_free(mbus, win))
+ return mvebu_mbus_setup_window(mbus, win, base, size,
+ remap, target, attr);
+
+ return -ENOMEM;
+}
+
+/*
+ * Debugfs debugging
+ */
+
+/* Common function used for Dove, Kirkwood, Armada 370/XP and Orion 5x */
+static int mvebu_sdram_debug_show_orion(struct mvebu_mbus_state *mbus,
+ struct seq_file *seq, void *v)
+{
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ u32 basereg = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
+ u32 sizereg = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
+ u64 base;
+ u32 size;
+
+ if (!(sizereg & DDR_SIZE_ENABLED)) {
+ seq_printf(seq, "[%d] disabled\n", i);
+ continue;
+ }
+
+ base = ((u64)basereg & DDR_BASE_CS_HIGH_MASK) << 32;
+ base |= basereg & DDR_BASE_CS_LOW_MASK;
+ size = (sizereg | ~DDR_SIZE_MASK);
+
+ seq_printf(seq, "[%d] %016llx - %016llx : cs%d\n",
+ i, (unsigned long long)base,
+ (unsigned long long)base + size + 1,
+ (sizereg & DDR_SIZE_CS_MASK) >> DDR_SIZE_CS_SHIFT);
+ }
+
+ return 0;
+}
+
+/* Special function for Dove */
+static int mvebu_sdram_debug_show_dove(struct mvebu_mbus_state *mbus,
+ struct seq_file *seq, void *v)
+{
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ u32 map = readl(mbus->sdramwins_base + DOVE_DDR_BASE_CS_OFF(i));
+ u64 base;
+ u32 size;
+
+ if (!(map & 1)) {
+ seq_printf(seq, "[%d] disabled\n", i);
+ continue;
+ }
+
+ base = map & 0xff800000;
+ size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
+
+ seq_printf(seq, "[%d] %016llx - %016llx : cs%d\n",
+ i, (unsigned long long)base,
+ (unsigned long long)base + size, i);
+ }
+
+ return 0;
+}
+
+static int mvebu_sdram_debug_show(struct seq_file *seq, void *v)
+{
+ struct mvebu_mbus_state *mbus = &mbus_state;
+ return mbus->soc->show_cpu_target(mbus, seq, v);
+}
+
+static int mvebu_sdram_debug_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, mvebu_sdram_debug_show, inode->i_private);
+}
+
+static const struct file_operations mvebu_sdram_debug_fops = {
+ .open = mvebu_sdram_debug_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int mvebu_devs_debug_show(struct seq_file *seq, void *v)
+{
+ struct mvebu_mbus_state *mbus = &mbus_state;
+ int win;
+
+ for (win = 0; win < mbus->soc->num_wins; win++) {
+ u64 wbase, wremap;
+ u32 wsize;
+ u8 wtarget, wattr;
+ int enabled, i;
+ const char *name;
+
+ mvebu_mbus_read_window(mbus, win,
+ &enabled, &wbase, &wsize,
+ &wtarget, &wattr, &wremap);
+
+ if (!enabled) {
+ seq_printf(seq, "[%02d] disabled\n", win);
+ continue;
+ }
+
+
+ for (i = 0; mbus->soc->map[i].name; i++)
+ if (mbus->soc->map[i].target == wtarget &&
+ mbus->soc->map[i].attr ==
+ (wattr & mbus->soc->map[i].attrmask))
+ break;
+
+ name = mbus->soc->map[i].name ?: "unknown";
+
+ seq_printf(seq, "[%02d] %016llx - %016llx : %s",
+ win, (unsigned long long)wbase,
+ (unsigned long long)(wbase + wsize), name);
+
+ if (win < mbus->soc->num_remappable_wins) {
+ seq_printf(seq, " (remap %016llx)\n",
+ (unsigned long long)wremap);
+ } else
+ seq_printf(seq, "\n");
+ }
+
+ return 0;
+}
+
+static int mvebu_devs_debug_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, mvebu_devs_debug_show, inode->i_private);
+}
+
+static const struct file_operations mvebu_devs_debug_fops = {
+ .open = mvebu_devs_debug_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+/*
+ * SoC-specific functions and definitions
+ */
+
+static unsigned int orion_mbus_win_offset(int win)
+{
+ return win << 4;
+}
+
+static unsigned int armada_370_xp_mbus_win_offset(int win)
+{
+ /* The register layout is a bit annoying and the below code
+ * tries to cope with it.
+ * - At offset 0x0, there are the registers for the first 8
+ * windows, with 4 registers of 32 bits per window (ctrl,
+ * base, remap low, remap high)
+ * - Then at offset 0x80, there is a hole of 0x10 bytes for
+ * the internal registers base address and internal units
+ * sync barrier register.
+ * - Then at offset 0x90, there the registers for 12
+ * windows, with only 2 registers of 32 bits per window
+ * (ctrl, base).
+ */
+ if (win < 8)
+ return win << 4;
+ else
+ return 0x90 + ((win - 8) << 3);
+}
+
+static unsigned int mv78xx0_mbus_win_offset(int win)
+{
+ if (win < 8)
+ return win << 4;
+ else
+ return 0x900 + ((win - 8) << 4);
+}
+
+static void __init
+mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
+{
+ int i;
+ int cs;
+
+ mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+ for (i = 0, cs = 0; i < 4; i++) {
+ u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
+ u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
+
+ /*
+ * We only take care of entries for which the chip
+ * select is enabled, and that don't have high base
+ * address bits set (devices can only access the first
+ * 32 bits of the memory).
+ */
+ if ((size & DDR_SIZE_ENABLED) &&
+ !(base & DDR_BASE_CS_HIGH_MASK)) {
+ struct mbus_dram_window *w;
+
+ w = &mvebu_mbus_dram_info.cs[cs++];
+ w->cs_index = i;
+ w->mbus_attr = 0xf & ~(1 << i);
+ if (mbus->hw_io_coherency)
+ w->mbus_attr |= ATTR_HW_COHERENCY;
+ w->base = base & DDR_BASE_CS_LOW_MASK;
+ w->size = (size | ~DDR_SIZE_MASK) + 1;
+ }
+ }
+ mvebu_mbus_dram_info.num_cs = cs;
+}
+
+static void __init
+mvebu_mbus_dove_setup_cpu_target(struct mvebu_mbus_state *mbus)
+{
+ int i;
+ int cs;
+
+ mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+ for (i = 0, cs = 0; i < 2; i++) {
+ u32 map = readl(mbus->sdramwins_base + DOVE_DDR_BASE_CS_OFF(i));
+
+ /*
+ * Chip select enabled?
+ */
+ if (map & 1) {
+ struct mbus_dram_window *w;
+
+ w = &mvebu_mbus_dram_info.cs[cs++];
+ w->cs_index = i;
+ w->mbus_attr = 0; /* CS address decoding done inside */
+ /* the DDR controller, no need to */
+ /* provide attributes */
+ w->base = map & 0xff800000;
+ w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
+ }
+ }
+
+ mvebu_mbus_dram_info.num_cs = cs;
+}
+
+static const struct mvebu_mbus_mapping armada_370_map[] = {
+ MAPDEF("bootrom", 1, 0xe0, MAPDEF_NOMASK),
+ MAPDEF("devbus-boot", 1, 0x2f, MAPDEF_NOMASK),
+ MAPDEF("devbus-cs0", 1, 0x3e, MAPDEF_NOMASK),
+ MAPDEF("devbus-cs1", 1, 0x3d, MAPDEF_NOMASK),
+ MAPDEF("devbus-cs2", 1, 0x3b, MAPDEF_NOMASK),
+ MAPDEF("devbus-cs3", 1, 0x37, MAPDEF_NOMASK),
+ MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK),
+ MAPDEF("pcie1.0", 8, 0xe0, MAPDEF_PCIMASK),
+ {},
+};
+
+static const struct mvebu_mbus_soc_data armada_370_mbus_data = {
+ .num_wins = 20,
+ .num_remappable_wins = 8,
+ .win_cfg_offset = armada_370_xp_mbus_win_offset,
+ .setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
+ .show_cpu_target = mvebu_sdram_debug_show_orion,
+ .map = armada_370_map,
+};
+
+static const struct mvebu_mbus_mapping armada_xp_map[] = {
+ MAPDEF("bootrom", 1, 0x1d, MAPDEF_NOMASK),
+ MAPDEF("devbus-boot", 1, 0x2f, MAPDEF_NOMASK),
+ MAPDEF("devbus-cs0", 1, 0x3e, MAPDEF_NOMASK),
+ MAPDEF("devbus-cs1", 1, 0x3d, MAPDEF_NOMASK),
+ MAPDEF("devbus-cs2", 1, 0x3b, MAPDEF_NOMASK),
+ MAPDEF("devbus-cs3", 1, 0x37, MAPDEF_NOMASK),
+ MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK),
+ MAPDEF("pcie0.1", 4, 0xd0, MAPDEF_PCIMASK),
+ MAPDEF("pcie0.2", 4, 0xb0, MAPDEF_PCIMASK),
+ MAPDEF("pcie0.3", 4, 0x70, MAPDEF_PCIMASK),
+ MAPDEF("pcie1.0", 8, 0xe0, MAPDEF_PCIMASK),
+ MAPDEF("pcie1.1", 8, 0xd0, MAPDEF_PCIMASK),
+ MAPDEF("pcie1.2", 8, 0xb0, MAPDEF_PCIMASK),
+ MAPDEF("pcie1.3", 8, 0x70, MAPDEF_PCIMASK),
+ MAPDEF("pcie2.0", 4, 0xf0, MAPDEF_PCIMASK),
+ MAPDEF("pcie3.0", 8, 0xf0, MAPDEF_PCIMASK),
+ {},
+};
+
+static const struct mvebu_mbus_soc_data armada_xp_mbus_data = {
+ .num_wins = 20,
+ .num_remappable_wins = 8,
+ .win_cfg_offset = armada_370_xp_mbus_win_offset,
+ .setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
+ .show_cpu_target = mvebu_sdram_debug_show_orion,
+ .map = armada_xp_map,
+};
+
+static const struct mvebu_mbus_mapping kirkwood_map[] = {
+ MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK),
+ MAPDEF("pcie1.0", 4, 0xd0, MAPDEF_PCIMASK),
+ MAPDEF("sram", 3, 0x01, MAPDEF_NOMASK),
+ MAPDEF("nand", 1, 0x2f, MAPDEF_NOMASK),
+ {},
+};
+
+static const struct mvebu_mbus_soc_data kirkwood_mbus_data = {
+ .num_wins = 8,
+ .num_remappable_wins = 4,
+ .win_cfg_offset = orion_mbus_win_offset,
+ .setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
+ .show_cpu_target = mvebu_sdram_debug_show_orion,
+ .map = kirkwood_map,
+};
+
+static const struct mvebu_mbus_mapping dove_map[] = {
+ MAPDEF("pcie0.0", 0x4, 0xe0, MAPDEF_PCIMASK),
+ MAPDEF("pcie1.0", 0x8, 0xe0, MAPDEF_PCIMASK),
+ MAPDEF("cesa", 0x3, 0x01, MAPDEF_NOMASK),
+ MAPDEF("bootrom", 0x1, 0xfd, MAPDEF_NOMASK),
+ MAPDEF("scratchpad", 0xd, 0x0, MAPDEF_NOMASK),
+ {},
+};
+
+static const struct mvebu_mbus_soc_data dove_mbus_data = {
+ .num_wins = 8,
+ .num_remappable_wins = 4,
+ .win_cfg_offset = orion_mbus_win_offset,
+ .setup_cpu_target = mvebu_mbus_dove_setup_cpu_target,
+ .show_cpu_target = mvebu_sdram_debug_show_dove,
+ .map = dove_map,
+};
+
+static const struct mvebu_mbus_mapping orion5x_map[] = {
+ MAPDEF("pcie0.0", 4, 0x51, MAPDEF_ORIONPCIMASK),
+ MAPDEF("pci0.0", 3, 0x51, MAPDEF_ORIONPCIMASK),
+ MAPDEF("devbus-boot", 1, 0x0f, MAPDEF_NOMASK),
+ MAPDEF("devbus-cs0", 1, 0x1e, MAPDEF_NOMASK),
+ MAPDEF("devbus-cs1", 1, 0x1d, MAPDEF_NOMASK),
+ MAPDEF("devbus-cs2", 1, 0x1b, MAPDEF_NOMASK),
+ MAPDEF("sram", 0, 0x00, MAPDEF_NOMASK),
+ {},
+};
+
+/*
+ * Some variants of Orion5x have 4 remappable windows, some other have
+ * only two of them.
+ */
+static const struct mvebu_mbus_soc_data orion5x_4win_mbus_data = {
+ .num_wins = 8,
+ .num_remappable_wins = 4,
+ .win_cfg_offset = orion_mbus_win_offset,
+ .setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
+ .show_cpu_target = mvebu_sdram_debug_show_orion,
+ .map = orion5x_map,
+};
+
+static const struct mvebu_mbus_soc_data orion5x_2win_mbus_data = {
+ .num_wins = 8,
+ .num_remappable_wins = 2,
+ .win_cfg_offset = orion_mbus_win_offset,
+ .setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
+ .show_cpu_target = mvebu_sdram_debug_show_orion,
+ .map = orion5x_map,
+};
+
+static const struct mvebu_mbus_mapping mv78xx0_map[] = {
+ MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK),
+ MAPDEF("pcie0.1", 4, 0xd0, MAPDEF_PCIMASK),
+ MAPDEF("pcie0.2", 4, 0xb0, MAPDEF_PCIMASK),
+ MAPDEF("pcie0.3", 4, 0x70, MAPDEF_PCIMASK),
+ MAPDEF("pcie1.0", 8, 0xe0, MAPDEF_PCIMASK),
+ MAPDEF("pcie1.1", 8, 0xd0, MAPDEF_PCIMASK),
+ MAPDEF("pcie1.2", 8, 0xb0, MAPDEF_PCIMASK),
+ MAPDEF("pcie1.3", 8, 0x70, MAPDEF_PCIMASK),
+ MAPDEF("pcie2.0", 4, 0xf0, MAPDEF_PCIMASK),
+ MAPDEF("pcie3.0", 8, 0xf0, MAPDEF_PCIMASK),
+ {},
+};
+
+static const struct mvebu_mbus_soc_data mv78xx0_mbus_data = {
+ .num_wins = 14,
+ .num_remappable_wins = 8,
+ .win_cfg_offset = mv78xx0_mbus_win_offset,
+ .setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
+ .show_cpu_target = mvebu_sdram_debug_show_orion,
+ .map = mv78xx0_map,
+};
+
+/*
+ * The driver doesn't yet have a DT binding because the details of
+ * this DT binding still need to be sorted out. However, as a
+ * preparation, we already use of_device_id to match a SoC description
+ * string against the SoC specific details of this driver.
+ */
+static const struct of_device_id of_mvebu_mbus_ids[] = {
+ { .compatible = "marvell,armada370-mbus",
+ .data = &armada_370_mbus_data, },
+ { .compatible = "marvell,armadaxp-mbus",
+ .data = &armada_xp_mbus_data, },
+ { .compatible = "marvell,kirkwood-mbus",
+ .data = &kirkwood_mbus_data, },
+ { .compatible = "marvell,dove-mbus",
+ .data = &dove_mbus_data, },
+ { .compatible = "marvell,orion5x-88f5281-mbus",
+ .data = &orion5x_4win_mbus_data, },
+ { .compatible = "marvell,orion5x-88f5182-mbus",
+ .data = &orion5x_2win_mbus_data, },
+ { .compatible = "marvell,orion5x-88f5181-mbus",
+ .data = &orion5x_2win_mbus_data, },
+ { .compatible = "marvell,orion5x-88f6183-mbus",
+ .data = &orion5x_4win_mbus_data, },
+ { .compatible = "marvell,mv78xx0-mbus",
+ .data = &mv78xx0_mbus_data, },
+ { },
+};
+
+/*
+ * Public API of the driver
+ */
+int mvebu_mbus_add_window_remap_flags(const char *devname, phys_addr_t base,
+ size_t size, phys_addr_t remap,
+ unsigned int flags)
+{
+ struct mvebu_mbus_state *s = &mbus_state;
+ u8 target, attr;
+ int i;
+
+ if (!s->soc->map)
+ return -ENODEV;
+
+ for (i = 0; s->soc->map[i].name; i++)
+ if (!strcmp(s->soc->map[i].name, devname))
+ break;
+
+ if (!s->soc->map[i].name) {
+ pr_err("mvebu-mbus: unknown device '%s'\n", devname);
+ return -ENODEV;
+ }
+
+ target = s->soc->map[i].target;
+ attr = s->soc->map[i].attr;
+
+ if (flags == MVEBU_MBUS_PCI_MEM)
+ attr |= 0x8;
+ else if (flags == MVEBU_MBUS_PCI_WA)
+ attr |= 0x28;
+
+ if (!mvebu_mbus_window_conflicts(s, base, size, target, attr)) {
+ pr_err("mvebu-mbus: cannot add window '%s', conflicts with another window\n",
+ devname);
+ return -EINVAL;
+ }
+
+ return mvebu_mbus_alloc_window(s, base, size, remap, target, attr);
+
+}
+
+int mvebu_mbus_add_window(const char *devname, phys_addr_t base, size_t size)
+{
+ return mvebu_mbus_add_window_remap_flags(devname, base, size,
+ MVEBU_MBUS_NO_REMAP, 0);
+}
+
+int mvebu_mbus_del_window(phys_addr_t base, size_t size)
+{
+ int win;
+
+ win = mvebu_mbus_find_window(&mbus_state, base, size);
+ if (win < 0)
+ return win;
+
+ mvebu_mbus_disable_window(&mbus_state, win);
+ return 0;
+}
+
+static __init int mvebu_mbus_debugfs_init(void)
+{
+ struct mvebu_mbus_state *s = &mbus_state;
+
+ /*
+ * If no base has been initialized, doesn't make sense to
+ * register the debugfs entries. We may be on a multiplatform
+ * kernel that isn't running a Marvell EBU SoC.
+ */
+ if (!s->mbuswins_base)
+ return 0;
+
+ s->debugfs_root = debugfs_create_dir("mvebu-mbus", NULL);
+ if (s->debugfs_root) {
+ s->debugfs_sdram = debugfs_create_file("sdram", S_IRUGO,
+ s->debugfs_root, NULL,
+ &mvebu_sdram_debug_fops);
+ s->debugfs_devs = debugfs_create_file("devices", S_IRUGO,
+ s->debugfs_root, NULL,
+ &mvebu_devs_debug_fops);
+ }
+
+ return 0;
+}
+fs_initcall(mvebu_mbus_debugfs_init);
+
+int __init mvebu_mbus_init(const char *soc, phys_addr_t mbuswins_phys_base,
+ size_t mbuswins_size,
+ phys_addr_t sdramwins_phys_base,
+ size_t sdramwins_size)
+{
+ struct mvebu_mbus_state *mbus = &mbus_state;
+ const struct of_device_id *of_id;
+ int win;
+
+ for (of_id = of_mvebu_mbus_ids; of_id->compatible; of_id++)
+ if (!strcmp(of_id->compatible, soc))
+ break;
+
+ if (!of_id->compatible) {
+ pr_err("mvebu-mbus: could not find a matching SoC family\n");
+ return -ENODEV;
+ }
+
+ mbus->soc = of_id->data;
+
+ mbus->mbuswins_base = ioremap(mbuswins_phys_base, mbuswins_size);
+ if (!mbus->mbuswins_base)
+ return -ENOMEM;
+
+ mbus->sdramwins_base = ioremap(sdramwins_phys_base, sdramwins_size);
+ if (!mbus->sdramwins_base) {
+ iounmap(mbus_state.mbuswins_base);
+ return -ENOMEM;
+ }
+
+ if (of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric"))
+ mbus->hw_io_coherency = 1;
+
+ for (win = 0; win < mbus->soc->num_wins; win++)
+ mvebu_mbus_disable_window(mbus, win);
+
+ mbus->soc->setup_cpu_target(mbus);
+
+ return 0;
+}
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7779.c b/drivers/pinctrl/sh-pfc/pfc-r8a7779.c
index 62dcdcdec940..791a6719d8a9 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7779.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7779.c
@@ -2552,7 +2552,7 @@ static const char * const intc_groups[] = {
"intc_irq2",
"intc_irq2_b",
"intc_irq3",
- "intc_irq4_b",
+ "intc_irq3_b",
};
static const char * const lbsc_groups[] = {
diff --git a/drivers/staging/imx-drm/ipu-v3/ipu-common.c b/drivers/staging/imx-drm/ipu-v3/ipu-common.c
index 0880ef1a01ba..0127601c26c7 100644
--- a/drivers/staging/imx-drm/ipu-v3/ipu-common.c
+++ b/drivers/staging/imx-drm/ipu-v3/ipu-common.c
@@ -16,6 +16,7 @@
#include <linux/export.h>
#include <linux/types.h>
#include <linux/init.h>
+#include <linux/reset.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/spinlock.h>
@@ -661,7 +662,7 @@ int ipu_idmac_disable_channel(struct ipuv3_channel *channel)
}
EXPORT_SYMBOL_GPL(ipu_idmac_disable_channel);
-static int ipu_reset(struct ipu_soc *ipu)
+static int ipu_memory_reset(struct ipu_soc *ipu)
{
unsigned long timeout;
@@ -1105,7 +1106,12 @@ static int ipu_probe(struct platform_device *pdev)
if (ret)
goto out_failed_irq;
- ret = ipu_reset(ipu);
+ ret = device_reset(&pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to reset: %d\n", ret);
+ goto out_failed_reset;
+ }
+ ret = ipu_memory_reset(ipu);
if (ret)
goto out_failed_reset;
@@ -1131,8 +1137,8 @@ static int ipu_probe(struct platform_device *pdev)
failed_add_clients:
ipu_submodules_exit(ipu);
failed_submodules_init:
- ipu_irq_exit(ipu);
out_failed_reset:
+ ipu_irq_exit(ipu);
out_failed_irq:
clk_disable_unprepare(ipu->clk);
failed_clk_get:
diff --git a/include/linux/mbus.h b/include/linux/mbus.h
index efa1a6d7aca8..dba482e31a13 100644
--- a/include/linux/mbus.h
+++ b/include/linux/mbus.h
@@ -32,6 +32,20 @@ struct mbus_dram_target_info
} cs[4];
};
+/* Flags for PCI/PCIe address decoding regions */
+#define MVEBU_MBUS_PCI_IO 0x1
+#define MVEBU_MBUS_PCI_MEM 0x2
+#define MVEBU_MBUS_PCI_WA 0x3
+
+/*
+ * Magic value that explicits that we don't need a remapping-capable
+ * address decoding window.
+ */
+#define MVEBU_MBUS_NO_REMAP (0xffffffff)
+
+/* Maximum size of a mbus window name */
+#define MVEBU_MBUS_MAX_WINNAME_SZ 32
+
/*
* The Marvell mbus is to be found only on SOCs from the Orion family
* at the moment. Provide a dummy stub for other architectures.
@@ -44,4 +58,15 @@ static inline const struct mbus_dram_target_info *mv_mbus_dram_info(void)
return NULL;
}
#endif
-#endif
+
+int mvebu_mbus_add_window_remap_flags(const char *devname, phys_addr_t base,
+ size_t size, phys_addr_t remap,
+ unsigned int flags);
+int mvebu_mbus_add_window(const char *devname, phys_addr_t base,
+ size_t size);
+int mvebu_mbus_del_window(phys_addr_t base, size_t size);
+int mvebu_mbus_init(const char *soc, phys_addr_t mbus_phys_base,
+ size_t mbus_size, phys_addr_t sdram_phys_base,
+ size_t sdram_size);
+
+#endif /* __LINUX_MBUS_H */