summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS49
-rw-r--r--arch/arm/Kconfig.debug7
-rw-r--r--arch/arm/boot/dts/Makefile4
-rw-r--r--arch/arm/boot/dts/am335x-bone-common.dtsi3
-rw-r--r--arch/arm/boot/dts/am335x-bone.dts5
-rw-r--r--arch/arm/boot/dts/am335x-boneblack.dts5
-rw-r--r--arch/arm/boot/dts/armada-370-netgear-rn102.dts4
-rw-r--r--arch/arm/boot/dts/armada-370-netgear-rn104.dts4
-rw-r--r--arch/arm/boot/dts/armada-xp-netgear-rn2120.dts4
-rw-r--r--arch/arm/boot/dts/at91sam9263.dtsi2
-rw-r--r--arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts16
-rw-r--r--arch/arm/boot/dts/kirkwood-rd88f6281-a.dts43
-rw-r--r--arch/arm/boot/dts/kirkwood-rd88f6281-a0.dts26
-rw-r--r--arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts (renamed from arch/arm/boot/dts/kirkwood-rd88f6281-a1.dts)18
-rw-r--r--arch/arm/boot/dts/kirkwood-rd88f6281.dtsi27
-rw-r--r--arch/arm/boot/dts/kirkwood.dtsi4
-rw-r--r--arch/arm/boot/dts/omap4-panda-common.dtsi3
-rw-r--r--arch/arm/boot/dts/omap4-panda-es.dts5
-rw-r--r--arch/arm/boot/dts/omap4-panda.dts5
-rw-r--r--arch/arm/mach-at91/clock.c1
-rw-r--r--arch/arm/mach-cns3xxx/cns3420vb.c1
-rw-r--r--arch/arm/mach-cns3xxx/core.c1
-rw-r--r--arch/arm/mach-cns3xxx/core.h6
-rw-r--r--arch/arm/mach-cns3xxx/pcie.c49
-rw-r--r--arch/arm/mach-davinci/board-da850-evm.c15
-rw-r--r--arch/arm/mach-lpc32xx/common.c29
-rw-r--r--arch/arm/mach-omap2/board-generic.c26
-rw-r--r--arch/arm/mach-omap2/common.h2
-rw-r--r--arch/arm/mach-omap2/gpmc.c2
-rw-r--r--arch/arm/mach-omap2/irq.c2
-rw-r--r--arch/arm/mach-omap2/omap-mpuss-lowpower.c4
-rw-r--r--arch/arm/mach-omap2/pdata-quirks.c2
-rw-r--r--arch/arm/mach-omap2/pm44xx.c9
-rw-r--r--arch/arm/mach-omap2/powerdomain.c79
-rw-r--r--arch/arm/mach-omap2/powerdomain.h4
-rw-r--r--arch/arm/mach-omap2/powerdomains54xx_data.c12
-rw-r--r--arch/arm/mach-omap2/powerdomains7xx_data.c14
-rw-r--r--arch/arm/mach-omap2/prm_common.c2
-rw-r--r--arch/arm/mach-omap2/timer.c6
-rw-r--r--arch/arm/mach-spear/Kconfig9
-rw-r--r--arch/arm/mach-vt8500/vt8500.c2
-rw-r--r--drivers/ata/Kconfig2
-rw-r--r--drivers/cpufreq/Kconfig.arm4
-rw-r--r--drivers/cpuidle/Kconfig.arm2
-rw-r--r--drivers/leds/Kconfig4
-rw-r--r--drivers/rtc/Kconfig2
-rw-r--r--drivers/thermal/Kconfig2
-rw-r--r--drivers/watchdog/Kconfig2
48 files changed, 327 insertions, 202 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 27bd1cc05a6b..efc5d4bffac6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -846,6 +846,12 @@ M: Emilio López <emilio@elopez.com.ar>
S: Maintained
F: drivers/clk/sunxi/
+ARM/Amlogic MesonX SoC support
+M: Carlo Caione <carlo@caione.org>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+N: meson[x68]
+
ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
M: Andrew Victor <linux@maxim.org.za>
M: Nicolas Ferre <nicolas.ferre@atmel.com>
@@ -872,10 +878,9 @@ S: Maintained
F: arch/arm/mach-highbank/
ARM/CAVIUM NETWORKS CNS3XXX MACHINE SUPPORT
-M: Anton Vorontsov <anton@enomsg.org>
+M: Krzysztof Halasa <khalasa@piap.pl>
S: Maintained
F: arch/arm/mach-cns3xxx/
-T: git git://git.infradead.org/users/cbou/linux-cns3xxx.git
ARM/CIRRUS LOGIC CLPS711X ARM ARCHITECTURE
M: Alexander Shiyan <shc_work@mail.ru>
@@ -975,7 +980,7 @@ F: arch/arm/include/asm/hardware/dec21285.h
F: arch/arm/mach-footbridge/
ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
-M: Shawn Guo <shawn.guo@freescale.com>
+M: Shawn Guo <shawn.guo@linaro.org>
M: Sascha Hauer <kernel@pengutronix.de>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
@@ -1060,7 +1065,7 @@ S: Maintained
ARM/INTEL IXP4XX ARM ARCHITECTURE
M: Imre Kaloz <kaloz@openwrt.org>
-M: Krzysztof Halasa <khc@pm.waw.pl>
+M: Krzysztof Halasa <khalasa@piap.pl>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-ixp4xx/
@@ -1156,6 +1161,16 @@ W: http://www.digriz.org.uk/ts78xx/kernel
S: Maintained
F: arch/arm/mach-orion5x/ts78xx-*
+ARM/Mediatek SoC support
+M: Matthias Brugger <matthias.bgg@gmail.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/boot/dts/mt6*
+F: arch/arm/boot/dts/mt8*
+F: arch/arm/mach-mediatek/
+N: mtk
+K: mediatek
+
ARM/MICREL KS8695 ARCHITECTURE
M: Greg Ungerer <gerg@uclinux.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1367,7 +1382,6 @@ F: arch/arm/boot/dts/sh*
F: arch/arm/configs/ape6evm_defconfig
F: arch/arm/configs/armadillo800eva_defconfig
F: arch/arm/configs/bockw_defconfig
-F: arch/arm/configs/genmai_defconfig
F: arch/arm/configs/koelsch_defconfig
F: arch/arm/configs/kzm9g_defconfig
F: arch/arm/configs/lager_defconfig
@@ -2021,6 +2035,7 @@ F: drivers/net/ethernet/broadcom/bnx2x/
BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
M: Christian Daudt <bcm@fixthebug.org>
M: Matt Porter <mporter@linaro.org>
+M: Florian Fainelli <f.fainelli@gmail.com>
L: bcm-kernel-feedback-list@broadcom.com
T: git git://github.com/broadcom/mach-bcm
S: Maintained
@@ -4796,7 +4811,7 @@ S: Odd fixes
F: drivers/dma/iop-adma.c
INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
-M: Krzysztof Halasa <khc@pm.waw.pl>
+M: Krzysztof Halasa <khalasa@piap.pl>
S: Maintained
F: arch/arm/mach-ixp4xx/include/mach/qmgr.h
F: arch/arm/mach-ixp4xx/include/mach/npe.h
@@ -7322,12 +7337,12 @@ F: drivers/video/backlight/pwm_bl.c
F: include/linux/pwm_backlight.h
PXA2xx/PXA3xx SUPPORT
-M: Eric Miao <eric.y.miao@gmail.com>
-M: Russell King <linux@arm.linux.org.uk>
+M: Daniel Mack <daniel@zonque.org>
M: Haojian Zhuang <haojian.zhuang@gmail.com>
+M: Robert Jarzmik <robert.jarzmik@free.fr>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://github.com/hzhuang1/linux.git
-T: git git://git.linaro.org/people/ycmiao/pxa-linux.git
+T: git git://github.com/rjarzmik/linux.git
S: Maintained
F: arch/arm/mach-pxa/
F: drivers/pcmcia/pxa2xx*
@@ -9044,17 +9059,13 @@ F: drivers/media/rc/ttusbir.c
TEGRA ARCHITECTURE SUPPORT
M: Stephen Warren <swarren@wwwdotorg.org>
M: Thierry Reding <thierry.reding@gmail.com>
+M: Alexandre Courbot <gnurou@gmail.com>
L: linux-tegra@vger.kernel.org
Q: http://patchwork.ozlabs.org/project/linux-tegra/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git
S: Supported
N: [^a-z]tegra
-TEGRA ASOC DRIVER
-M: Stephen Warren <swarren@wwwdotorg.org>
-S: Supported
-F: sound/soc/tegra/
-
TEGRA CLOCK DRIVER
M: Peter De Schrijver <pdeschrijver@nvidia.com>
M: Prashant Gaikwad <pgaikwad@nvidia.com>
@@ -9066,11 +9077,6 @@ M: Laxman Dewangan <ldewangan@nvidia.com>
S: Supported
F: drivers/dma/tegra20-apb-dma.c
-TEGRA GPIO DRIVER
-M: Stephen Warren <swarren@wwwdotorg.org>
-S: Supported
-F: drivers/gpio/gpio-tegra.c
-
TEGRA I2C DRIVER
M: Laxman Dewangan <ldewangan@nvidia.com>
S: Supported
@@ -9087,11 +9093,6 @@ M: Laxman Dewangan <ldewangan@nvidia.com>
S: Supported
F: drivers/input/keyboard/tegra-kbc.c
-TEGRA PINCTRL DRIVER
-M: Stephen Warren <swarren@wwwdotorg.org>
-S: Supported
-F: drivers/pinctrl/pinctrl-tegra*
-
TEGRA PWM DRIVER
M: Thierry Reding <thierry.reding@gmail.com>
S: Supported
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index b11ad54f8d17..6a5b4968b46e 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -147,7 +147,7 @@ choice
config DEBUG_CNS3XXX
bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx"
depends on ARCH_CNS3XXX
- select DEBUG_UART_PL01X
+ select DEBUG_UART_8250
help
Say Y here if you want the debug print routines to direct
their output to the CNS3xxx UART0.
@@ -1068,7 +1068,7 @@ config DEBUG_UART_PHYS
default 0x02530c00 if DEBUG_KEYSTONE_UART0
default 0x02531000 if DEBUG_KEYSTONE_UART1
default 0x03010fe0 if ARCH_RPC
- default 0x10009000 if DEBUG_REALVIEW_STD_PORT || DEBUG_CNS3XXX || \
+ default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
DEBUG_VEXPRESS_UART0_CA9
default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
default 0x10124000 if DEBUG_RK3X_UART0
@@ -1094,6 +1094,7 @@ config DEBUG_UART_PHYS
default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
DEBUG_S3C2410_UART2)
default 0x7c0003f8 if FOOTBRIDGE
+ default 0x78000000 if DEBUG_CNS3XXX
default 0x80070000 if DEBUG_IMX23_UART
default 0x80074000 if DEBUG_IMX28_UART
default 0x80230000 if DEBUG_PICOXCELL_UART
@@ -1133,7 +1134,6 @@ config DEBUG_UART_VIRT
default 0xe0010fe0 if ARCH_RPC
default 0xe1000000 if DEBUG_MSM_UART
default 0xf0000be0 if ARCH_EBSA110
- default 0xf0009000 if DEBUG_CNS3XXX
default 0xf01fb000 if DEBUG_NOMADIK_UART
default 0xf0201000 if DEBUG_BCM2835
default 0xf1000300 if DEBUG_BCM_5301X
@@ -1155,6 +1155,7 @@ config DEBUG_UART_VIRT
default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
default 0xfa71e000 if DEBUG_QCOM_UARTDM
+ default 0xfb002000 if DEBUG_CNS3XXX
default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b8c5cd3ddeb9..e6aa6e77a3ec 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -144,8 +144,8 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \
kirkwood-openrd-client.dtb \
kirkwood-openrd-ultimate.dtb \
kirkwood-rd88f6192.dtb \
- kirkwood-rd88f6281-a0.dtb \
- kirkwood-rd88f6281-a1.dtb \
+ kirkwood-rd88f6281-z0.dtb \
+ kirkwood-rd88f6281-a.dtb \
kirkwood-rs212.dtb \
kirkwood-rs409.dtb \
kirkwood-rs411.dtb \
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index bde1777b62be..d9d98697cca9 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -7,9 +7,6 @@
*/
/ {
- model = "TI AM335x BeagleBone";
- compatible = "ti,am335x-bone", "ti,am33xx";
-
cpus {
cpu@0 {
cpu0-supply = <&dcdc2_reg>;
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 94ee427a6db1..83d40f7655e5 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -10,6 +10,11 @@
#include "am33xx.dtsi"
#include "am335x-bone-common.dtsi"
+/ {
+ model = "TI AM335x BeagleBone";
+ compatible = "ti,am335x-bone", "ti,am33xx";
+};
+
&ldo3_reg {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index 305975d3f531..901739fcb85a 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -10,6 +10,11 @@
#include "am33xx.dtsi"
#include "am335x-bone-common.dtsi"
+/ {
+ model = "TI AM335x BeagleBone Black";
+ compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
+
&ldo3_reg {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index d6d572e5af32..285524fb915e 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -143,6 +143,10 @@
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
+ /* Use Hardware BCH ECC */
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
partition@0 {
label = "u-boot";
reg = <0x0000000 0x180000>; /* 1.5MB */
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index c5fe8b5dcdc7..4ec1ce561d34 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -145,6 +145,10 @@
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
+ /* Use Hardware BCH ECC */
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
partition@0 {
label = "u-boot";
reg = <0x0000000 0x180000>; /* 1.5MB */
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index 0cf999abc4ed..c5ed85a70ed9 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -223,6 +223,10 @@
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
+ /* Use Hardware BCH ECC */
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
partition@0 {
label = "u-boot";
reg = <0x0000000 0x180000>; /* 1.5MB */
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index bb23c2d33cf8..5e95a8053445 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -834,6 +834,7 @@
compatible = "atmel,hsmci";
reg = <0xfff80000 0x600>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mci0_clk>;
@@ -845,6 +846,7 @@
compatible = "atmel,hsmci";
reg = <0xfff84000 0x600>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mci1_clk>;
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
index 8f76d28759a3..f82827d6fcff 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -123,11 +123,11 @@
dsa@0 {
compatible = "marvell,dsa";
- #address-cells = <2>;
+ #address-cells = <1>;
#size-cells = <0>;
- dsa,ethernet = <&eth0>;
- dsa,mii-bus = <&ethphy0>;
+ dsa,ethernet = <&eth0port>;
+ dsa,mii-bus = <&mdio>;
switch@0 {
#address-cells = <1>;
@@ -169,17 +169,13 @@
&mdio {
status = "okay";
-
- ethphy0: ethernet-phy@ff {
- reg = <0xff>; /* No phy attached */
- speed = <1000>;
- duplex = <1>;
- };
};
&eth0 {
status = "okay";
+
ethernet0-port@0 {
- phy-handle = <&ethphy0>;
+ speed = <1000>;
+ duplex = <1>;
};
};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts
new file mode 100644
index 000000000000..f2e08b3b33ea
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts
@@ -0,0 +1,43 @@
+/*
+ * Marvell RD88F6181 A Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions for the board with the A0 or
+ * higher stepping of the SoC. The ethernet switch does not have a
+ * "wan" port.
+ */
+
+/dts-v1/;
+#include "kirkwood-rd88f6281.dtsi"
+
+/ {
+ model = "Marvell RD88f6281 Reference design, with A0 or higher SoC";
+ compatible = "marvell,rd88f6281-a", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ dsa@0 {
+ switch@0 {
+ reg = <10 0>; /* MDIO address 10, switch 0 in tree */
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy1: ethernet-phy@11 {
+ reg = <11>;
+ };
+};
+
+&eth1 {
+ status = "okay";
+
+ ethernet1-port@0 {
+ phy-handle = <&ethphy1>;
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a0.dts
deleted file mode 100644
index a803bbb70bc8..000000000000
--- a/arch/arm/boot/dts/kirkwood-rd88f6281-a0.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Marvell RD88F6181 A0 Board descrition
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions for the board with the A0 variant of
- * the SoC. The ethernet switch does not have a "wan" port.
- */
-
-/dts-v1/;
-#include "kirkwood-rd88f6281.dtsi"
-
-/ {
- model = "Marvell RD88f6281 Reference design, with A0 SoC";
- compatible = "marvell,rd88f6281-a0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- dsa@0 {
- switch@0 {
- reg = <10 0>; /* MDIO address 10, switch 0 in tree */
- };
- };
-}; \ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a1.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
index baeebbf1d8c7..f4272b64ed7f 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281-a1.dts
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
@@ -1,5 +1,5 @@
/*
- * Marvell RD88F6181 A1 Board descrition
+ * Marvell RD88F6181 Z0 stepping descrition
*
* Andrew Lunn <andrew@lunn.ch>
*
@@ -7,17 +7,17 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
- * This file contains the definitions for the board with the A1 variant of
- * the SoC. The ethernet switch has a "wan" port.
- */
+ * This file contains the definitions for the board using the Z0
+ * stepping of the SoC. The ethernet switch has a "wan" port.
+*/
/dts-v1/;
#include "kirkwood-rd88f6281.dtsi"
/ {
- model = "Marvell RD88f6281 Reference design, with A1 SoC";
- compatible = "marvell,rd88f6281-a1", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
+ model = "Marvell RD88f6281 Reference design, with Z0 SoC";
+ compatible = "marvell,rd88f6281-z0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
dsa@0 {
switch@0 {
@@ -28,4 +28,8 @@
};
};
};
-}; \ No newline at end of file
+};
+
+&eth1 {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
index 26cf0e0ccefd..d195e884b3b5 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
@@ -37,7 +37,6 @@
ocp@f1000000 {
pinctrl: pin-controller@10000 {
- pinctrl-0 = <&pmx_sdio_cd>;
pinctrl-names = "default";
pmx_sdio_cd: pmx-sdio-cd {
@@ -69,8 +68,8 @@
#address-cells = <2>;
#size-cells = <0>;
- dsa,ethernet = <&eth0>;
- dsa,mii-bus = <&ethphy1>;
+ dsa,ethernet = <&eth0port>;
+ dsa,mii-bus = <&mdio>;
switch@0 {
#address-cells = <1>;
@@ -119,35 +118,19 @@
};
partition@300000 {
- label = "data";
+ label = "rootfs";
reg = <0x0300000 0x500000>;
};
};
&mdio {
status = "okay";
-
- ethphy0: ethernet-phy@0 {
- reg = <0>;
- };
-
- ethphy1: ethernet-phy@ff {
- reg = <0xff>; /* No PHY attached */
- speed = <1000>;
- duple = <1>;
- };
};
&eth0 {
status = "okay";
ethernet0-port@0 {
- phy-handle = <&ethphy0>;
- };
-};
-
-&eth1 {
- status = "okay";
- ethernet1-port@0 {
- phy-handle = <&ethphy1>;
+ speed = <1000>;
+ duplex = <1>;
};
};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index afc640cd80c5..464f09a1a4a5 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -309,7 +309,7 @@
marvell,tx-checksum-limit = <1600>;
status = "disabled";
- ethernet0-port@0 {
+ eth0port: ethernet0-port@0 {
compatible = "marvell,kirkwood-eth-port";
reg = <0>;
interrupts = <11>;
@@ -342,7 +342,7 @@
pinctrl-names = "default";
status = "disabled";
- ethernet1-port@0 {
+ eth1port: ethernet1-port@0 {
compatible = "marvell,kirkwood-eth-port";
reg = <0>;
interrupts = <15>;
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 8cfa3c8a72b0..150513506c19 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -8,9 +8,6 @@
#include "elpida_ecb240abacn.dtsi"
/ {
- model = "TI OMAP4 PandaBoard";
- compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
-
memory {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 816d1c95b592..2f1dabcc6adf 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -10,6 +10,11 @@
#include "omap4460.dtsi"
#include "omap4-panda-common.dtsi"
+/ {
+ model = "TI OMAP4 PandaBoard-ES";
+ compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4";
+};
+
/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
&sound {
ti,model = "PandaBoardES";
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 6189a8b77d7f..a0e28b2e254e 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -9,3 +9,8 @@
#include "omap443x.dtsi"
#include "omap4-panda-common.dtsi"
+
+/ {
+ model = "TI OMAP4 PandaBoard";
+ compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
+};
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 034529d801b2..d66f102c352a 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -962,6 +962,7 @@ static int __init at91_clock_reset(void)
}
at91_pmc_write(AT91_PMC_SCDR, scdr);
+ at91_pmc_write(AT91_PMC_PCDR, pcdr);
if (cpu_is_sama5d3())
at91_pmc_write(AT91_PMC_PCDR1, pcdr1);
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index d863d8729edc..6428bcc77e87 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -250,5 +250,6 @@ MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
.init_irq = cns3xxx_init_irq,
.init_time = cns3xxx_timer_init,
.init_machine = cns3420_init,
+ .init_late = cns3xxx_pcie_init_late,
.restart = cns3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index f85449a6accd..4e9837ded96d 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -404,5 +404,6 @@ DT_MACHINE_START(CNS3XXX_DT, "Cavium Networks CNS3xxx")
.init_irq = cns3xxx_init_irq,
.init_time = cns3xxx_timer_init,
.init_machine = cns3xxx_init,
+ .init_late = cns3xxx_pcie_init_late,
.restart = cns3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h
index 5218b6198dc2..dc5df7f1e39f 100644
--- a/arch/arm/mach-cns3xxx/core.h
+++ b/arch/arm/mach-cns3xxx/core.h
@@ -21,6 +21,12 @@ void __init cns3xxx_l2x0_init(void);
static inline void cns3xxx_l2x0_init(void) {}
#endif /* CONFIG_CACHE_L2X0 */
+#ifdef CONFIG_PCI
+extern void __init cns3xxx_pcie_init_late(void);
+#else
+static inline void __init cns3xxx_pcie_init_late(void) {}
+#endif
+
void __init cns3xxx_map_io(void);
void __init cns3xxx_init_irq(void);
void cns3xxx_power_off(void);
diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c
index 413134c54452..45d6bd09e6ef 100644
--- a/arch/arm/mach-cns3xxx/pcie.c
+++ b/arch/arm/mach-cns3xxx/pcie.c
@@ -60,11 +60,10 @@ static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus,
struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus);
int busno = bus->number;
int slot = PCI_SLOT(devfn);
- int offset;
void __iomem *base;
/* If there is no link, just show the CNS PCI bridge. */
- if (!cnspci->linked && (busno > 0 || slot > 0))
+ if (!cnspci->linked && busno > 0)
return NULL;
/*
@@ -72,22 +71,21 @@ static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus,
* we still want to access it. For this to work, we must place
* the first device on the same bus as the CNS PCI bridge.
*/
- if (busno == 0) { /* directly connected PCIe bus */
- switch (slot) {
- case 0: /* host bridge device, function 0 only */
+ if (busno == 0) { /* internal PCIe bus, host bridge device */
+ if (devfn == 0) /* device# and function# are ignored by hw */
base = cnspci->host_regs;
- break;
- case 1: /* directly connected device */
+ else
+ return NULL; /* no such device */
+
+ } else if (busno == 1) { /* directly connected PCIe device */
+ if (slot == 0) /* device# is ignored by hw */
base = cnspci->cfg0_regs;
- break;
- default:
+ else
return NULL; /* no such device */
- }
} else /* remote PCI bus */
- base = cnspci->cfg1_regs;
+ base = cnspci->cfg1_regs + ((busno & 0xf) << 20);
- offset = ((busno & 0xf) << 20) | (devfn << 12) | (where & 0xffc);
- return base + offset;
+ return base + (where & 0xffc) + (devfn << 12);
}
static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
@@ -167,7 +165,7 @@ static struct pci_ops cns3xxx_pcie_ops = {
static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev);
- int irq = cnspci->irqs[slot];
+ int irq = cnspci->irqs[!!dev->bus->number];
pr_info("PCIe map irq: %04d:%02x:%02x.%02x slot %d, pin %d, irq: %d\n",
pci_domain_nr(dev->bus), dev->bus->number, PCI_SLOT(dev->devfn),
@@ -297,15 +295,19 @@ static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci)
return;
/* Set Device Max_Read_Request_Size to 128 byte */
- devfn = PCI_DEVFN(1, 0);
+ bus.number = 1; /* directly connected PCIe device */
+ devfn = PCI_DEVFN(0, 0);
pos = pci_bus_find_capability(&bus, devfn, PCI_CAP_ID_EXP);
pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
- dc &= ~(0x3 << 12); /* Clear Device Control Register [14:12] */
- pci_bus_write_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, dc);
- pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
- if (!(dc & (0x3 << 12)))
- pr_info("PCIe: Set Device Max_Read_Request_Size to 128 byte\n");
-
+ if (dc & PCI_EXP_DEVCTL_READRQ) {
+ dc &= ~PCI_EXP_DEVCTL_READRQ;
+ pci_bus_write_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, dc);
+ pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
+ if (dc & PCI_EXP_DEVCTL_READRQ)
+ pr_warn("PCIe: Unable to set device Max_Read_Request_Size\n");
+ else
+ pr_info("PCIe: Max_Read_Request_Size set to 128 bytes\n");
+ }
/* Disable PCIe0 Interrupt Mask INTA to INTD */
__raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(port));
}
@@ -318,7 +320,7 @@ static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr,
return 0;
}
-static int __init cns3xxx_pcie_init(void)
+void __init cns3xxx_pcie_init_late(void)
{
int i;
@@ -337,7 +339,4 @@ static int __init cns3xxx_pcie_init(void)
}
pci_assign_unassigned_resources();
-
- return 0;
}
-device_initcall(cns3xxx_pcie_init);
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 234c5bb091f5..fa11415e906a 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -35,6 +35,7 @@
#include <linux/platform_data/uio_pruss.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/tps6507x.h>
+#include <linux/regulator/fixed.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/wl12xx.h>
@@ -842,6 +843,16 @@ static int da850_lcd_hw_init(void)
return 0;
}
+/* Fixed regulator support */
+static struct regulator_consumer_supply fixed_supplies[] = {
+ /* Baseboard 3.3V: 5V -> TPS73701DCQ -> 3.3V */
+ REGULATOR_SUPPLY("AVDD", "1-0018"),
+ REGULATOR_SUPPLY("DRVDD", "1-0018"),
+
+ /* Baseboard 1.8V: 5V -> TPS73701DCQ -> 1.8V */
+ REGULATOR_SUPPLY("DVDD", "1-0018"),
+};
+
/* TPS65070 voltage regulator support */
/* 3.3V */
@@ -865,6 +876,7 @@ static struct regulator_consumer_supply tps65070_dcdc2_consumers[] = {
{
.supply = "dvdd3318_c",
},
+ REGULATOR_SUPPLY("IOVDD", "1-0018"),
};
/* 1.2V */
@@ -936,6 +948,7 @@ static struct regulator_init_data tps65070_regulator_data[] = {
.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS),
.boot_on = 1,
+ .always_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
.consumer_supplies = tps65070_dcdc2_consumers,
@@ -1446,6 +1459,8 @@ static __init void da850_evm_init(void)
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+ regulator_register_fixed(0, fixed_supplies, ARRAY_SIZE(fixed_supplies));
+
ret = pmic_tps65070_init();
if (ret)
pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret);
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index de03620d7fa7..716e83eb1db8 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -57,20 +57,6 @@ int clk_is_sysclk_mainosc(void)
}
/*
- * System reset via the watchdog timer
- */
-static void lpc32xx_watchdog_reset(void)
-{
- /* Make sure WDT clocks are enabled */
- __raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
- LPC32XX_CLKPWR_TIMER_CLK_CTRL);
-
- /* Instant assert of RESETOUT_N with pulse length 1mS */
- __raw_writel(13000, io_p2v(LPC32XX_WDTIM_BASE + 0x18));
- __raw_writel(0x70, io_p2v(LPC32XX_WDTIM_BASE + 0xC));
-}
-
-/*
* Detects and returns IRAM size for the device variation
*/
#define LPC32XX_IRAM_BANK_SIZE SZ_128K
@@ -210,16 +196,13 @@ void __init lpc32xx_map_io(void)
void lpc23xx_restart(enum reboot_mode mode, const char *cmd)
{
- switch (mode) {
- case REBOOT_SOFT:
- case REBOOT_HARD:
- lpc32xx_watchdog_reset();
- break;
+ /* Make sure WDT clocks are enabled */
+ __raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
+ LPC32XX_CLKPWR_TIMER_CLK_CTRL);
- default:
- /* Do nothing */
- break;
- }
+ /* Instant assert of RESETOUT_N with pulse length 1mS */
+ __raw_writel(13000, io_p2v(LPC32XX_WDTIM_BASE + 0x18));
+ __raw_writel(0x70, io_p2v(LPC32XX_WDTIM_BASE + 0xC));
/* Wait for watchdog to reset system */
while (1)
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 9480997ba616..0b311d51425f 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -27,7 +27,7 @@
#define gic_of_init NULL
#endif
-static struct of_device_id omap_dt_match_table[] __initdata = {
+static const struct of_device_id omap_dt_match_table[] __initconst = {
{ .compatible = "simple-bus", },
{ .compatible = "ti,omap-infra", },
{ }
@@ -43,7 +43,7 @@ static void __init omap_generic_init(void)
}
#ifdef CONFIG_SOC_OMAP2420
-static const char *omap242x_boards_compat[] __initconst = {
+static const char *const omap242x_boards_compat[] __initconst = {
"ti,omap2420",
NULL,
};
@@ -62,7 +62,7 @@ MACHINE_END
#endif
#ifdef CONFIG_SOC_OMAP2430
-static const char *omap243x_boards_compat[] __initconst = {
+static const char *const omap243x_boards_compat[] __initconst = {
"ti,omap2430",
NULL,
};
@@ -81,7 +81,7 @@ MACHINE_END
#endif
#ifdef CONFIG_ARCH_OMAP3
-static const char *omap3_boards_compat[] __initconst = {
+static const char *const omap3_boards_compat[] __initconst = {
"ti,omap3430",
"ti,omap3",
NULL,
@@ -100,7 +100,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
.restart = omap3xxx_restart,
MACHINE_END
-static const char *omap36xx_boards_compat[] __initconst = {
+static const char *const omap36xx_boards_compat[] __initconst = {
"ti,omap36xx",
NULL,
};
@@ -118,7 +118,7 @@ DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)")
.restart = omap3xxx_restart,
MACHINE_END
-static const char *omap3_gp_boards_compat[] __initconst = {
+static const char *const omap3_gp_boards_compat[] __initconst = {
"ti,omap3-beagle",
"timll,omap3-devkit8000",
NULL,
@@ -137,7 +137,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)")
.restart = omap3xxx_restart,
MACHINE_END
-static const char *am3517_boards_compat[] __initconst = {
+static const char *const am3517_boards_compat[] __initconst = {
"ti,am3517",
NULL,
};
@@ -157,7 +157,7 @@ MACHINE_END
#endif
#ifdef CONFIG_SOC_AM33XX
-static const char *am33xx_boards_compat[] __initconst = {
+static const char *const am33xx_boards_compat[] __initconst = {
"ti,am33xx",
NULL,
};
@@ -177,7 +177,7 @@ MACHINE_END
#endif
#ifdef CONFIG_ARCH_OMAP4
-static const char *omap4_boards_compat[] __initconst = {
+static const char *const omap4_boards_compat[] __initconst = {
"ti,omap4460",
"ti,omap4430",
"ti,omap4",
@@ -199,7 +199,7 @@ MACHINE_END
#endif
#ifdef CONFIG_SOC_OMAP5
-static const char *omap5_boards_compat[] __initconst = {
+static const char *const omap5_boards_compat[] __initconst = {
"ti,omap5432",
"ti,omap5430",
"ti,omap5",
@@ -221,7 +221,7 @@ MACHINE_END
#endif
#ifdef CONFIG_SOC_AM43XX
-static const char *am43_boards_compat[] __initconst = {
+static const char *const am43_boards_compat[] __initconst = {
"ti,am4372",
"ti,am43",
NULL,
@@ -240,7 +240,7 @@ MACHINE_END
#endif
#ifdef CONFIG_SOC_DRA7XX
-static const char *dra74x_boards_compat[] __initconst = {
+static const char *const dra74x_boards_compat[] __initconst = {
"ti,dra742",
"ti,dra7",
NULL,
@@ -259,7 +259,7 @@ DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)")
.restart = omap44xx_restart,
MACHINE_END
-static const char *dra72x_boards_compat[] __initconst = {
+static const char *const dra72x_boards_compat[] __initconst = {
"ti,dra722",
NULL,
};
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index dc571f1d3b8a..79664411e794 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -307,7 +307,7 @@ static inline void omap4_cpu_resume(void)
#endif
-void pdata_quirks_init(struct of_device_id *);
+void pdata_quirks_init(const struct of_device_id *);
void omap_auxdata_legacy_init(struct device *dev);
void omap_pcs_legacy_init(int irq, void (*rearm)(void));
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 2f97228f188a..a4d52c42a438 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1243,7 +1243,7 @@ int gpmc_cs_program_settings(int cs, struct gpmc_settings *p)
}
#ifdef CONFIG_OF
-static struct of_device_id gpmc_dt_ids[] = {
+static const struct of_device_id gpmc_dt_ids[] = {
{ .compatible = "ti,omap2420-gpmc" },
{ .compatible = "ti,omap2430-gpmc" },
{ .compatible = "ti,omap3430-gpmc" }, /* omap3430 & omap3630 */
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 35b8590c322e..604a976abf14 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -289,7 +289,7 @@ int __init intc_of_init(struct device_node *node,
return 0;
}
-static struct of_device_id irq_match[] __initdata = {
+static const struct of_device_id irq_match[] __initconst = {
{ .compatible = "ti,omap2-intc", .data = intc_of_init, },
{ }
};
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 4001325f90fb..e9cdacfe1923 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -298,6 +298,10 @@ int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
if (omap_rev() == OMAP4430_REV_ES1_0)
return -ENXIO;
+ /* Use the achievable power state for the domain */
+ power_state = pwrdm_get_valid_lp_state(pm_info->pwrdm,
+ false, power_state);
+
if (power_state == PWRDM_POWER_OFF)
cpu_state = 1;
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 90c88d498485..05a8c8b07449 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -405,7 +405,7 @@ static void pdata_quirks_check(struct pdata_init *quirks)
}
}
-void __init pdata_quirks_init(struct of_device_id *omap_dt_match_table)
+void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
{
omap_sdrc_init(NULL, NULL);
pdata_quirks_check(auxdata_quirks);
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 0dda6cf8b855..0bfce38a744a 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -29,6 +29,7 @@ u16 pm44xx_errata;
struct power_state {
struct powerdomain *pwrdm;
u32 next_state;
+ u32 next_logic_state;
#ifdef CONFIG_SUSPEND
u32 saved_state;
u32 saved_logic_state;
@@ -54,7 +55,7 @@ static int omap4_pm_suspend(void)
/* Set targeted power domain states by suspend */
list_for_each_entry(pwrst, &pwrst_list, node) {
omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
- pwrdm_set_logic_retst(pwrst->pwrdm, PWRDM_POWER_OFF);
+ pwrdm_set_logic_retst(pwrst->pwrdm, pwrst->next_logic_state);
}
/*
@@ -120,7 +121,11 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
return -ENOMEM;
pwrst->pwrdm = pwrdm;
- pwrst->next_state = PWRDM_POWER_RET;
+ pwrst->next_state = pwrdm_get_valid_lp_state(pwrdm, false,
+ PWRDM_POWER_RET);
+ pwrst->next_logic_state = pwrdm_get_valid_lp_state(pwrdm, true,
+ PWRDM_POWER_OFF);
+
list_add(&pwrst->node, &pwrst_list);
return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index faebd5f076af..7fb033eca0a5 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -546,7 +546,8 @@ int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
return -EINVAL;
for (i = 0; i < PWRDM_MAX_CLKDMS && !ret; i++)
- ret = (*fn)(pwrdm, pwrdm->pwrdm_clkdms[i]);
+ if (pwrdm->pwrdm_clkdms[i])
+ ret = (*fn)(pwrdm, pwrdm->pwrdm_clkdms[i]);
return ret;
}
@@ -1080,6 +1081,82 @@ int pwrdm_post_transition(struct powerdomain *pwrdm)
}
/**
+ * pwrdm_get_valid_lp_state() - Find best match deep power state
+ * @pwrdm: power domain for which we want to find best match
+ * @is_logic_state: Are we looking for logic state match here? Should
+ * be one of PWRDM_xxx macro values
+ * @req_state: requested power state
+ *
+ * Returns: closest match for requested power state. default fallback
+ * is RET for logic state and ON for power state.
+ *
+ * This does a search from the power domain data looking for the
+ * closest valid power domain state that the hardware can achieve.
+ * PRCM definitions for PWRSTCTRL allows us to program whatever
+ * configuration we'd like, and PRCM will actually attempt such
+ * a transition, however if the powerdomain does not actually support it,
+ * we endup with a hung system. The valid power domain states are already
+ * available in our powerdomain data files. So this function tries to do
+ * the following:
+ * a) find if we have an exact match to the request - no issues.
+ * b) else find if a deeper power state is possible.
+ * c) failing which, it tries to find closest higher power state for the
+ * request.
+ */
+u8 pwrdm_get_valid_lp_state(struct powerdomain *pwrdm,
+ bool is_logic_state, u8 req_state)
+{
+ u8 pwrdm_states = is_logic_state ? pwrdm->pwrsts_logic_ret :
+ pwrdm->pwrsts;
+ /* For logic, ret is highest and others, ON is highest */
+ u8 default_pwrst = is_logic_state ? PWRDM_POWER_RET : PWRDM_POWER_ON;
+ u8 new_pwrst;
+ bool found;
+
+ /* If it is already supported, nothing to search */
+ if (pwrdm_states & BIT(req_state))
+ return req_state;
+
+ if (!req_state)
+ goto up_search;
+
+ /*
+ * So, we dont have a exact match
+ * Can we get a deeper power state match?
+ */
+ new_pwrst = req_state - 1;
+ found = true;
+ while (!(pwrdm_states & BIT(new_pwrst))) {
+ /* No match even at OFF? Not available */
+ if (new_pwrst == PWRDM_POWER_OFF) {
+ found = false;
+ break;
+ }
+ new_pwrst--;
+ }
+
+ if (found)
+ goto done;
+
+up_search:
+ /* OK, no deeper ones, can we get a higher match? */
+ new_pwrst = req_state + 1;
+ while (!(pwrdm_states & BIT(new_pwrst))) {
+ if (new_pwrst > PWRDM_POWER_ON) {
+ WARN(1, "powerdomain: %s: Fix max powerstate to ON\n",
+ pwrdm->name);
+ return PWRDM_POWER_ON;
+ }
+
+ if (new_pwrst == default_pwrst)
+ break;
+ new_pwrst++;
+ }
+done:
+ return new_pwrst;
+}
+
+/**
* omap_set_pwrdm_state - change a powerdomain's current power state
* @pwrdm: struct powerdomain * to change the power state of
* @pwrst: power state to change to
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index f4727117f6cc..11bd4dd7d8d6 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -39,6 +39,7 @@
#define PWRSTS_OFF_RET (PWRSTS_OFF | PWRSTS_RET)
#define PWRSTS_RET_ON (PWRSTS_RET | PWRSTS_ON)
#define PWRSTS_OFF_RET_ON (PWRSTS_OFF_RET | PWRSTS_ON)
+#define PWRSTS_INA_ON (PWRSTS_INACTIVE | PWRSTS_ON)
/*
@@ -219,6 +220,9 @@ struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm);
int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm);
+u8 pwrdm_get_valid_lp_state(struct powerdomain *pwrdm,
+ bool is_logic_state, u8 req_state);
+
int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
int pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
int pwrdm_read_pwrst(struct powerdomain *pwrdm);
diff --git a/arch/arm/mach-omap2/powerdomains54xx_data.c b/arch/arm/mach-omap2/powerdomains54xx_data.c
index ce1d752af991..60d7ed8ef8ca 100644
--- a/arch/arm/mach-omap2/powerdomains54xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains54xx_data.c
@@ -35,7 +35,7 @@ static struct powerdomain core_54xx_pwrdm = {
.prcm_offs = OMAP54XX_PRM_CORE_INST,
.prcm_partition = OMAP54XX_PRM_PARTITION,
.pwrsts = PWRSTS_RET_ON,
- .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .pwrsts_logic_ret = PWRSTS_RET,
.banks = 5,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* core_nret_bank */
@@ -107,8 +107,8 @@ static struct powerdomain cpu0_54xx_pwrdm = {
.voltdm = { .name = "mpu" },
.prcm_offs = OMAP54XX_PRCM_MPU_PRM_C0_INST,
.prcm_partition = OMAP54XX_PRCM_MPU_PARTITION,
- .pwrsts = PWRSTS_OFF_RET_ON,
- .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .pwrsts = PWRSTS_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* cpu0_l1 */
@@ -124,8 +124,8 @@ static struct powerdomain cpu1_54xx_pwrdm = {
.voltdm = { .name = "mpu" },
.prcm_offs = OMAP54XX_PRCM_MPU_PRM_C1_INST,
.prcm_partition = OMAP54XX_PRCM_MPU_PARTITION,
- .pwrsts = PWRSTS_OFF_RET_ON,
- .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .pwrsts = PWRSTS_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* cpu1_l1 */
@@ -158,7 +158,7 @@ static struct powerdomain mpu_54xx_pwrdm = {
.prcm_offs = OMAP54XX_PRM_MPU_INST,
.prcm_partition = OMAP54XX_PRM_PARTITION,
.pwrsts = PWRSTS_RET_ON,
- .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .pwrsts_logic_ret = PWRSTS_RET,
.banks = 2,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* mpu_l2 */
diff --git a/arch/arm/mach-omap2/powerdomains7xx_data.c b/arch/arm/mach-omap2/powerdomains7xx_data.c
index 48151d1cfde0..287a2037aa16 100644
--- a/arch/arm/mach-omap2/powerdomains7xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains7xx_data.c
@@ -160,8 +160,8 @@ static struct powerdomain core_7xx_pwrdm = {
.name = "core_pwrdm",
.prcm_offs = DRA7XX_PRM_CORE_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
- .pwrsts = PWRSTS_RET_ON,
- .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .pwrsts = PWRSTS_INA_ON,
+ .pwrsts_logic_ret = PWRSTS_RET,
.banks = 5,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* core_nret_bank */
@@ -193,8 +193,8 @@ static struct powerdomain cpu0_7xx_pwrdm = {
.name = "cpu0_pwrdm",
.prcm_offs = DRA7XX_MPU_PRCM_PRM_C0_INST,
.prcm_partition = DRA7XX_MPU_PRCM_PARTITION,
- .pwrsts = PWRSTS_OFF_RET_ON,
- .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .pwrsts = PWRSTS_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* cpu0_l1 */
@@ -209,8 +209,8 @@ static struct powerdomain cpu1_7xx_pwrdm = {
.name = "cpu1_pwrdm",
.prcm_offs = DRA7XX_MPU_PRCM_PRM_C1_INST,
.prcm_partition = DRA7XX_MPU_PRCM_PARTITION,
- .pwrsts = PWRSTS_OFF_RET_ON,
- .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .pwrsts = PWRSTS_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* cpu1_l1 */
@@ -243,7 +243,7 @@ static struct powerdomain mpu_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_MPU_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_RET_ON,
- .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .pwrsts_logic_ret = PWRSTS_RET,
.banks = 2,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* mpu_l2 */
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 76ca320f007c..74054b813600 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -467,7 +467,7 @@ int prm_unregister(struct prm_ll_data *pld)
return 0;
}
-static struct of_device_id omap_prcm_dt_match_table[] = {
+static const struct of_device_id omap_prcm_dt_match_table[] = {
{ .compatible = "ti,am3-prcm" },
{ .compatible = "ti,am3-scrm" },
{ .compatible = "ti,am4-prcm" },
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 43d03fbf4c0b..4f61148ec168 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -141,7 +141,7 @@ static struct property device_disabled = {
.value = "disabled",
};
-static struct of_device_id omap_timer_match[] __initdata = {
+static const struct of_device_id omap_timer_match[] __initconst = {
{ .compatible = "ti,omap2420-timer", },
{ .compatible = "ti,omap3430-timer", },
{ .compatible = "ti,omap4430-timer", },
@@ -162,7 +162,7 @@ static struct of_device_id omap_timer_match[] __initdata = {
* the timer node in device-tree as disabled, to prevent the kernel from
* registering this timer as a platform device and so no one else can use it.
*/
-static struct device_node * __init omap_get_timer_dt(struct of_device_id *match,
+static struct device_node * __init omap_get_timer_dt(const struct of_device_id *match,
const char *property)
{
struct device_node *np;
@@ -388,7 +388,7 @@ static u64 notrace dmtimer_read_sched_clock(void)
return 0;
}
-static struct of_device_id omap_counter_match[] __initdata = {
+static const struct of_device_id omap_counter_match[] __initconst = {
{ .compatible = "ti,omap-counter32k", },
{ }
};
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index 6fd4dc88160b..b6f4bda273b3 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -4,7 +4,6 @@
menuconfig PLAT_SPEAR
bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5
- default PLAT_SPEAR_SINGLE
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select CLKSRC_MMIO
@@ -13,7 +12,7 @@ if PLAT_SPEAR
config ARCH_SPEAR13XX
bool "ST SPEAr13xx"
- depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
+ depends on ARCH_MULTI_V7
select ARM_GIC
select GPIO_SPEAR_SPICS
select HAVE_ARM_SCU if SMP
@@ -44,7 +43,7 @@ endif #ARCH_SPEAR13XX
config ARCH_SPEAR3XX
bool "ST SPEAr3xx"
- depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
+ depends on ARCH_MULTI_V5
depends on !ARCH_SPEAR13XX
select ARM_VIC
select PINCTRL
@@ -75,7 +74,7 @@ endif
config ARCH_SPEAR6XX
bool "ST SPEAr6XX"
- depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
+ depends on ARCH_MULTI_V5
depends on !ARCH_SPEAR13XX
select ARM_VIC
help
@@ -88,7 +87,7 @@ config MACH_SPEAR600
Supports ST SPEAr600 boards configured via the device-tree
config ARCH_SPEAR_AUTO
- def_bool PLAT_SPEAR_SINGLE
+ bool
depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX
select ARCH_SPEAR3XX
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index 2da7be31e7e2..3bc0dc9a4d69 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -69,7 +69,7 @@ static void vt8500_power_off(void)
{
local_irq_disable();
writew(5, pmc_base + VT8500_HCR_REG);
- asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0));
+ asm("mcr p15, 0, %0, c7, c0, 4" : : "r" (0));
}
static void __init vt8500_init(void)
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index e1b92788c225..cd4cccbfd2ab 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -299,7 +299,7 @@ config SATA_HIGHBANK
config SATA_MV
tristate "Marvell SATA support"
- depends on PCI || ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \
+ depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
select GENERIC_PHY
help
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 7364a538e056..28c666c80149 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -77,7 +77,7 @@ config ARM_EXYNOS5440_CPUFREQ
config ARM_EXYNOS_CPU_FREQ_BOOST_SW
bool "EXYNOS Frequency Overclocking - Software"
- depends on ARM_EXYNOS_CPUFREQ
+ depends on ARM_EXYNOS_CPUFREQ && THERMAL
select CPU_FREQ_BOOST_SW
select EXYNOS_THERMAL
help
@@ -119,7 +119,7 @@ config ARM_INTEGRATOR
If in doubt, say Y.
config ARM_KIRKWOOD_CPUFREQ
- def_bool ARCH_KIRKWOOD || MACH_KIRKWOOD
+ def_bool MACH_KIRKWOOD
help
This adds the CPUFreq driver for Marvell Kirkwood
SoCs.
diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
index 38cff69ffe06..58bcd0d166ec 100644
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -28,7 +28,7 @@ config ARM_HIGHBANK_CPUIDLE
config ARM_KIRKWOOD_CPUIDLE
bool "CPU Idle Driver for Marvell Kirkwood SoCs"
- depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
+ depends on MACH_KIRKWOOD
help
This adds the CPU Idle driver for Marvell Kirkwood SoCs.
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 8c96e2ddf43b..f6ef7bb2dc11 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -410,7 +410,7 @@ config LEDS_MC13783
config LEDS_NS2
tristate "LED support for Network Space v2 GPIO LEDs"
depends on LEDS_CLASS
- depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
+ depends on MACH_KIRKWOOD
default y
help
This option enable support for the dual-GPIO LED found on the
@@ -420,7 +420,7 @@ config LEDS_NS2
config LEDS_NETXBIG
tristate "LED support for Big Network series LEDs"
depends on LEDS_CLASS
- depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
+ depends on MACH_KIRKWOOD
default y
help
This option enable support for LEDs found on the LaCie 2Big
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index a168e96142b9..fae9464eed9c 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1198,7 +1198,7 @@ config RTC_DRV_TX4939
config RTC_DRV_MV
tristate "Marvell SoC RTC"
- depends on ARCH_KIRKWOOD || ARCH_DOVE || ARCH_MVEBU
+ depends on ARCH_DOVE || ARCH_MVEBU
help
If you say yes here you will get support for the in-chip RTC
that can be found in some of Marvell's SoC devices, such as
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 693208eb9047..ef5587fe2c69 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -143,7 +143,7 @@ config RCAR_THERMAL
config KIRKWOOD_THERMAL
tristate "Temperature sensor on Marvell Kirkwood SoCs"
- depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
+ depends on MACH_KIRKWOOD
depends on OF
help
Support for the Kirkwood thermal sensor driver into the Linux thermal
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index f57312fced80..1d1330a78af3 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -301,7 +301,7 @@ config DAVINCI_WATCHDOG
config ORION_WATCHDOG
tristate "Orion watchdog"
- depends on ARCH_ORION5X || ARCH_KIRKWOOD || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU
+ depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU
select WATCHDOG_CORE
help
Say Y here if to include support for the watchdog timer