summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS10
-rw-r--r--net/mac80211/Kconfig17
-rw-r--r--net/mac80211/Makefile5
-rw-r--r--net/mac80211/main.c7
-rw-r--r--net/mac80211/rate.h13
-rw-r--r--net/mac80211/rc80211_pid.h278
-rw-r--r--net/mac80211/rc80211_pid_algo.c478
-rw-r--r--net/mac80211/rc80211_pid_debugfs.c228
8 files changed, 0 insertions, 1036 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 134483f206e4..54ba0e643c39 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5629,16 +5629,6 @@ F: Documentation/networking/mac80211-injection.txt
F: include/net/mac80211.h
F: net/mac80211/
-MAC80211 PID RATE CONTROL
-M: Stefano Brivio <stefano.brivio@polimi.it>
-M: Mattias Nissler <mattias.nissler@gmx.de>
-L: linux-wireless@vger.kernel.org
-W: http://wireless.kernel.org/en/developers/Documentation/mac80211/RateControl/PID
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
-S: Maintained
-F: net/mac80211/rc80211_pid*
-
MACVLAN DRIVER
M: Patrick McHardy <kaber@trash.net>
L: netdev@vger.kernel.org
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index 97b5dcad5025..aeb6a483b3bc 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -19,14 +19,6 @@ if MAC80211 != n
config MAC80211_HAS_RC
bool
-config MAC80211_RC_PID
- bool "PID controller based rate control algorithm" if EXPERT
- select MAC80211_HAS_RC
- ---help---
- This option enables a TX rate control algorithm for
- mac80211 that uses a PID controller to select the TX
- rate.
-
config MAC80211_RC_MINSTREL
bool "Minstrel" if EXPERT
select MAC80211_HAS_RC
@@ -51,14 +43,6 @@ choice
overridden through the ieee80211_default_rc_algo module
parameter if different algorithms are available.
-config MAC80211_RC_DEFAULT_PID
- bool "PID controller based rate control algorithm"
- depends on MAC80211_RC_PID
- ---help---
- Select the PID controller based rate control as the
- default rate control algorithm. You should choose
- this unless you know what you are doing.
-
config MAC80211_RC_DEFAULT_MINSTREL
bool "Minstrel"
depends on MAC80211_RC_MINSTREL
@@ -72,7 +56,6 @@ config MAC80211_RC_DEFAULT
string
default "minstrel_ht" if MAC80211_RC_DEFAULT_MINSTREL && MAC80211_RC_MINSTREL_HT
default "minstrel" if MAC80211_RC_DEFAULT_MINSTREL
- default "pid" if MAC80211_RC_DEFAULT_PID
default ""
endif
diff --git a/net/mac80211/Makefile b/net/mac80211/Makefile
index 1e46ffa69167..4409bf506594 100644
--- a/net/mac80211/Makefile
+++ b/net/mac80211/Makefile
@@ -47,17 +47,12 @@ mac80211-$(CONFIG_PM) += pm.o
CFLAGS_trace.o := -I$(src)
-# objects for PID algorithm
-rc80211_pid-y := rc80211_pid_algo.o
-rc80211_pid-$(CONFIG_MAC80211_DEBUGFS) += rc80211_pid_debugfs.o
-
rc80211_minstrel-y := rc80211_minstrel.o
rc80211_minstrel-$(CONFIG_MAC80211_DEBUGFS) += rc80211_minstrel_debugfs.o
rc80211_minstrel_ht-y := rc80211_minstrel_ht.o
rc80211_minstrel_ht-$(CONFIG_MAC80211_DEBUGFS) += rc80211_minstrel_ht_debugfs.o
-mac80211-$(CONFIG_MAC80211_RC_PID) += $(rc80211_pid-y)
mac80211-$(CONFIG_MAC80211_RC_MINSTREL) += $(rc80211_minstrel-y)
mac80211-$(CONFIG_MAC80211_RC_MINSTREL_HT) += $(rc80211_minstrel_ht-y)
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index d17c26d6e369..0512a5096f0f 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -1187,18 +1187,12 @@ static int __init ieee80211_init(void)
if (ret)
goto err_minstrel;
- ret = rc80211_pid_init();
- if (ret)
- goto err_pid;
-
ret = ieee80211_iface_init();
if (ret)
goto err_netdev;
return 0;
err_netdev:
- rc80211_pid_exit();
- err_pid:
rc80211_minstrel_ht_exit();
err_minstrel:
rc80211_minstrel_exit();
@@ -1208,7 +1202,6 @@ static int __init ieee80211_init(void)
static void __exit ieee80211_exit(void)
{
- rc80211_pid_exit();
rc80211_minstrel_ht_exit();
rc80211_minstrel_exit();
diff --git a/net/mac80211/rate.h b/net/mac80211/rate.h
index 9aa2a1190a86..18babe302832 100644
--- a/net/mac80211/rate.h
+++ b/net/mac80211/rate.h
@@ -143,19 +143,6 @@ void rate_control_deinitialize(struct ieee80211_local *local);
/* Rate control algorithms */
-#ifdef CONFIG_MAC80211_RC_PID
-int rc80211_pid_init(void);
-void rc80211_pid_exit(void);
-#else
-static inline int rc80211_pid_init(void)
-{
- return 0;
-}
-static inline void rc80211_pid_exit(void)
-{
-}
-#endif
-
#ifdef CONFIG_MAC80211_RC_MINSTREL
int rc80211_minstrel_init(void);
void rc80211_minstrel_exit(void);
diff --git a/net/mac80211/rc80211_pid.h b/net/mac80211/rc80211_pid.h
deleted file mode 100644
index 19111c7bf454..000000000000
--- a/net/mac80211/rc80211_pid.h
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * Copyright 2007, Mattias Nissler <mattias.nissler@gmx.de>
- * Copyright 2007, Stefano Brivio <stefano.brivio@polimi.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef RC80211_PID_H
-#define RC80211_PID_H
-
-/* Sampling period for measuring percentage of failed frames in ms. */
-#define RC_PID_INTERVAL 125
-
-/* Exponential averaging smoothness (used for I part of PID controller) */
-#define RC_PID_SMOOTHING_SHIFT 3
-#define RC_PID_SMOOTHING (1 << RC_PID_SMOOTHING_SHIFT)
-
-/* Sharpening factor (used for D part of PID controller) */
-#define RC_PID_SHARPENING_FACTOR 0
-#define RC_PID_SHARPENING_DURATION 0
-
-/* Fixed point arithmetic shifting amount. */
-#define RC_PID_ARITH_SHIFT 8
-
-/* Proportional PID component coefficient. */
-#define RC_PID_COEFF_P 15
-/* Integral PID component coefficient. */
-#define RC_PID_COEFF_I 9
-/* Derivative PID component coefficient. */
-#define RC_PID_COEFF_D 15
-
-/* Target failed frames rate for the PID controller. NB: This effectively gives
- * maximum failed frames percentage we're willing to accept. If the wireless
- * link quality is good, the controller will fail to adjust failed frames
- * percentage to the target. This is intentional.
- */
-#define RC_PID_TARGET_PF 14
-
-/* Rate behaviour normalization quantity over time. */
-#define RC_PID_NORM_OFFSET 3
-
-/* Push high rates right after loading. */
-#define RC_PID_FAST_START 0
-
-/* Arithmetic right shift for positive and negative values for ISO C. */
-#define RC_PID_DO_ARITH_RIGHT_SHIFT(x, y) \
- ((x) < 0 ? -((-(x)) >> (y)) : (x) >> (y))
-
-enum rc_pid_event_type {
- RC_PID_EVENT_TYPE_TX_STATUS,
- RC_PID_EVENT_TYPE_RATE_CHANGE,
- RC_PID_EVENT_TYPE_TX_RATE,
- RC_PID_EVENT_TYPE_PF_SAMPLE,
-};
-
-union rc_pid_event_data {
- /* RC_PID_EVENT_TX_STATUS */
- struct {
- u32 flags;
- struct ieee80211_tx_info tx_status;
- };
- /* RC_PID_EVENT_TYPE_RATE_CHANGE */
- /* RC_PID_EVENT_TYPE_TX_RATE */
- struct {
- int index;
- int rate;
- };
- /* RC_PID_EVENT_TYPE_PF_SAMPLE */
- struct {
- s32 pf_sample;
- s32 prop_err;
- s32 int_err;
- s32 der_err;
- };
-};
-
-struct rc_pid_event {
- /* The time when the event occurred */
- unsigned long timestamp;
-
- /* Event ID number */
- unsigned int id;
-
- /* Type of event */
- enum rc_pid_event_type type;
-
- /* type specific data */
- union rc_pid_event_data data;
-};
-
-/* Size of the event ring buffer. */
-#define RC_PID_EVENT_RING_SIZE 32
-
-struct rc_pid_event_buffer {
- /* Counter that generates event IDs */
- unsigned int ev_count;
-
- /* Ring buffer of events */
- struct rc_pid_event ring[RC_PID_EVENT_RING_SIZE];
-
- /* Index to the entry in events_buf to be reused */
- unsigned int next_entry;
-
- /* Lock that guards against concurrent access to this buffer struct */
- spinlock_t lock;
-
- /* Wait queue for poll/select and blocking I/O */
- wait_queue_head_t waitqueue;
-};
-
-struct rc_pid_events_file_info {
- /* The event buffer we read */
- struct rc_pid_event_buffer *events;
-
- /* The entry we have should read next */
- unsigned int next_entry;
-};
-
-/**
- * struct rc_pid_debugfs_entries - tunable parameters
- *
- * Algorithm parameters, tunable via debugfs.
- * @target: target percentage for failed frames
- * @sampling_period: error sampling interval in milliseconds
- * @coeff_p: absolute value of the proportional coefficient
- * @coeff_i: absolute value of the integral coefficient
- * @coeff_d: absolute value of the derivative coefficient
- * @smoothing_shift: absolute value of the integral smoothing factor (i.e.
- * amount of smoothing introduced by the exponential moving average)
- * @sharpen_factor: absolute value of the derivative sharpening factor (i.e.
- * amount of emphasis given to the derivative term after low activity
- * events)
- * @sharpen_duration: duration of the sharpening effect after the detected low
- * activity event, relative to sampling_period
- * @norm_offset: amount of normalization periodically performed on the learnt
- * rate behaviour values (lower means we should trust more what we learnt
- * about behaviour of rates, higher means we should trust more the natural
- * ordering of rates)
- */
-struct rc_pid_debugfs_entries {
- struct dentry *target;
- struct dentry *sampling_period;
- struct dentry *coeff_p;
- struct dentry *coeff_i;
- struct dentry *coeff_d;
- struct dentry *smoothing_shift;
- struct dentry *sharpen_factor;
- struct dentry *sharpen_duration;
- struct dentry *norm_offset;
-};
-
-void rate_control_pid_event_tx_status(struct rc_pid_event_buffer *buf,
- struct ieee80211_tx_info *stat);
-
-void rate_control_pid_event_rate_change(struct rc_pid_event_buffer *buf,
- int index, int rate);
-
-void rate_control_pid_event_tx_rate(struct rc_pid_event_buffer *buf,
- int index, int rate);
-
-void rate_control_pid_event_pf_sample(struct rc_pid_event_buffer *buf,
- s32 pf_sample, s32 prop_err,
- s32 int_err, s32 der_err);
-
-void rate_control_pid_add_sta_debugfs(void *priv, void *priv_sta,
- struct dentry *dir);
-
-void rate_control_pid_remove_sta_debugfs(void *priv, void *priv_sta);
-
-struct rc_pid_sta_info {
- unsigned long last_change;
- unsigned long last_sample;
-
- u32 tx_num_failed;
- u32 tx_num_xmit;
-
- int txrate_idx;
-
- /* Average failed frames percentage error (i.e. actual vs. target
- * percentage), scaled by RC_PID_SMOOTHING. This value is computed
- * using using an exponential weighted average technique:
- *
- * (RC_PID_SMOOTHING - 1) * err_avg_old + err
- * err_avg = ------------------------------------------
- * RC_PID_SMOOTHING
- *
- * where err_avg is the new approximation, err_avg_old the previous one
- * and err is the error w.r.t. to the current failed frames percentage
- * sample. Note that the bigger RC_PID_SMOOTHING the more weight is
- * given to the previous estimate, resulting in smoother behavior (i.e.
- * corresponding to a longer integration window).
- *
- * For computation, we actually don't use the above formula, but this
- * one:
- *
- * err_avg_scaled = err_avg_old_scaled - err_avg_old + err
- *
- * where:
- * err_avg_scaled = err * RC_PID_SMOOTHING
- * err_avg_old_scaled = err_avg_old * RC_PID_SMOOTHING
- *
- * This avoids floating point numbers and the per_failed_old value can
- * easily be obtained by shifting per_failed_old_scaled right by
- * RC_PID_SMOOTHING_SHIFT.
- */
- s32 err_avg_sc;
-
- /* Last framed failes percentage sample. */
- u32 last_pf;
-
- /* Sharpening needed. */
- u8 sharp_cnt;
-
-#ifdef CONFIG_MAC80211_DEBUGFS
- /* Event buffer */
- struct rc_pid_event_buffer events;
-
- /* Events debugfs file entry */
- struct dentry *events_entry;
-#endif
-};
-
-/* Algorithm parameters. We keep them on a per-algorithm approach, so they can
- * be tuned individually for each interface.
- */
-struct rc_pid_rateinfo {
-
- /* Map sorted rates to rates in ieee80211_hw_mode. */
- int index;
-
- /* Map rates in ieee80211_hw_mode to sorted rates. */
- int rev_index;
-
- /* Did we do any measurement on this rate? */
- bool valid;
-
- /* Comparison with the lowest rate. */
- int diff;
-};
-
-struct rc_pid_info {
-
- /* The failed frames percentage target. */
- unsigned int target;
-
- /* Rate at which failed frames percentage is sampled in 0.001s. */
- unsigned int sampling_period;
-
- /* P, I and D coefficients. */
- int coeff_p;
- int coeff_i;
- int coeff_d;
-
- /* Exponential averaging shift. */
- unsigned int smoothing_shift;
-
- /* Sharpening factor and duration. */
- unsigned int sharpen_factor;
- unsigned int sharpen_duration;
-
- /* Normalization offset. */
- unsigned int norm_offset;
-
- /* Rates information. */
- struct rc_pid_rateinfo *rinfo;
-
- /* Index of the last used rate. */
- int oldrate;
-
-#ifdef CONFIG_MAC80211_DEBUGFS
- /* Debugfs entries created for the parameters above. */
- struct rc_pid_debugfs_entries dentries;
-#endif
-};
-
-#endif /* RC80211_PID_H */
diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c
deleted file mode 100644
index d0da2a70fe68..000000000000
--- a/net/mac80211/rc80211_pid_algo.c
+++ /dev/null
@@ -1,478 +0,0 @@
-/*
- * Copyright 2002-2005, Instant802 Networks, Inc.
- * Copyright 2005, Devicescape Software, Inc.
- * Copyright 2007, Mattias Nissler <mattias.nissler@gmx.de>
- * Copyright 2007-2008, Stefano Brivio <stefano.brivio@polimi.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/netdevice.h>
-#include <linux/types.h>
-#include <linux/skbuff.h>
-#include <linux/debugfs.h>
-#include <linux/slab.h>
-#include <net/mac80211.h>
-#include "rate.h"
-#include "mesh.h"
-#include "rc80211_pid.h"
-
-
-/* This is an implementation of a TX rate control algorithm that uses a PID
- * controller. Given a target failed frames rate, the controller decides about
- * TX rate changes to meet the target failed frames rate.
- *
- * The controller basically computes the following:
- *
- * adj = CP * err + CI * err_avg + CD * (err - last_err) * (1 + sharpening)
- *
- * where
- * adj adjustment value that is used to switch TX rate (see below)
- * err current error: target vs. current failed frames percentage
- * last_err last error
- * err_avg average (i.e. poor man's integral) of recent errors
- * sharpening non-zero when fast response is needed (i.e. right after
- * association or no frames sent for a long time), heading
- * to zero over time
- * CP Proportional coefficient
- * CI Integral coefficient
- * CD Derivative coefficient
- *
- * CP, CI, CD are subject to careful tuning.
- *
- * The integral component uses a exponential moving average approach instead of
- * an actual sliding window. The advantage is that we don't need to keep an
- * array of the last N error values and computation is easier.
- *
- * Once we have the adj value, we map it to a rate by means of a learning
- * algorithm. This algorithm keeps the state of the percentual failed frames
- * difference between rates. The behaviour of the lowest available rate is kept
- * as a reference value, and every time we switch between two rates, we compute
- * the difference between the failed frames each rate exhibited. By doing so,
- * we compare behaviours which different rates exhibited in adjacent timeslices,
- * thus the comparison is minimally affected by external conditions. This
- * difference gets propagated to the whole set of measurements, so that the
- * reference is always the same. Periodically, we normalize this set so that
- * recent events weigh the most. By comparing the adj value with this set, we
- * avoid pejorative switches to lower rates and allow for switches to higher
- * rates if they behaved well.
- *
- * Note that for the computations we use a fixed-point representation to avoid
- * floating point arithmetic. Hence, all values are shifted left by
- * RC_PID_ARITH_SHIFT.
- */
-
-
-/* Adjust the rate while ensuring that we won't switch to a lower rate if it
- * exhibited a worse failed frames behaviour and we'll choose the highest rate
- * whose failed frames behaviour is not worse than the one of the original rate
- * target. While at it, check that the new rate is valid. */
-static void rate_control_pid_adjust_rate(struct ieee80211_supported_band *sband,
- struct ieee80211_sta *sta,
- struct rc_pid_sta_info *spinfo, int adj,
- struct rc_pid_rateinfo *rinfo)
-{
- int cur_sorted, new_sorted, probe, tmp, n_bitrates, band;
- int cur = spinfo->txrate_idx;
-
- band = sband->band;
- n_bitrates = sband->n_bitrates;
-
- /* Map passed arguments to sorted values. */
- cur_sorted = rinfo[cur].rev_index;
- new_sorted = cur_sorted + adj;
-
- /* Check limits. */
- if (new_sorted < 0)
- new_sorted = rinfo[0].rev_index;
- else if (new_sorted >= n_bitrates)
- new_sorted = rinfo[n_bitrates - 1].rev_index;
-
- tmp = new_sorted;
-
- if (adj < 0) {
- /* Ensure that the rate decrease isn't disadvantageous. */
- for (probe = cur_sorted; probe >= new_sorted; probe--)
- if (rinfo[probe].diff <= rinfo[cur_sorted].diff &&
- rate_supported(sta, band, rinfo[probe].index))
- tmp = probe;
- } else {
- /* Look for rate increase with zero (or below) cost. */
- for (probe = new_sorted + 1; probe < n_bitrates; probe++)
- if (rinfo[probe].diff <= rinfo[new_sorted].diff &&
- rate_supported(sta, band, rinfo[probe].index))
- tmp = probe;
- }
-
- /* Fit the rate found to the nearest supported rate. */
- do {
- if (rate_supported(sta, band, rinfo[tmp].index)) {
- spinfo->txrate_idx = rinfo[tmp].index;
- break;
- }
- if (adj < 0)
- tmp--;
- else
- tmp++;
- } while (tmp < n_bitrates && tmp >= 0);
-
-#ifdef CONFIG_MAC80211_DEBUGFS
- rate_control_pid_event_rate_change(&spinfo->events,
- spinfo->txrate_idx,
- sband->bitrates[spinfo->txrate_idx].bitrate);
-#endif
-}
-
-/* Normalize the failed frames per-rate differences. */
-static void rate_control_pid_normalize(struct rc_pid_info *pinfo, int l)
-{
- int i, norm_offset = pinfo->norm_offset;
- struct rc_pid_rateinfo *r = pinfo->rinfo;
-
- if (r[0].diff > norm_offset)
- r[0].diff -= norm_offset;
- else if (r[0].diff < -norm_offset)
- r[0].diff += norm_offset;
- for (i = 0; i < l - 1; i++)
- if (r[i + 1].diff > r[i].diff + norm_offset)
- r[i + 1].diff -= norm_offset;
- else if (r[i + 1].diff <= r[i].diff)
- r[i + 1].diff += norm_offset;
-}
-
-static void rate_control_pid_sample(struct rc_pid_info *pinfo,
- struct ieee80211_supported_band *sband,
- struct ieee80211_sta *sta,
- struct rc_pid_sta_info *spinfo)
-{
- struct rc_pid_rateinfo *rinfo = pinfo->rinfo;
- u32 pf;
- s32 err_avg;
- u32 err_prop;
- u32 err_int;
- u32 err_der;
- int adj, i, j, tmp;
- unsigned long period;
-
- /* In case nothing happened during the previous control interval, turn
- * the sharpening factor on. */
- period = msecs_to_jiffies(pinfo->sampling_period);
- if (jiffies - spinfo->last_sample > 2 * period)
- spinfo->sharp_cnt = pinfo->sharpen_duration;
-
- spinfo->last_sample = jiffies;
-
- /* This should never happen, but in case, we assume the old sample is
- * still a good measurement and copy it. */
- if (unlikely(spinfo->tx_num_xmit == 0))
- pf = spinfo->last_pf;
- else
- pf = spinfo->tx_num_failed * 100 / spinfo->tx_num_xmit;
-
- spinfo->tx_num_xmit = 0;
- spinfo->tx_num_failed = 0;
-
- /* If we just switched rate, update the rate behaviour info. */
- if (pinfo->oldrate != spinfo->txrate_idx) {
-
- i = rinfo[pinfo->oldrate].rev_index;
- j = rinfo[spinfo->txrate_idx].rev_index;
-
- tmp = (pf - spinfo->last_pf);
- tmp = RC_PID_DO_ARITH_RIGHT_SHIFT(tmp, RC_PID_ARITH_SHIFT);
-
- rinfo[j].diff = rinfo[i].diff + tmp;
- pinfo->oldrate = spinfo->txrate_idx;
- }
- rate_control_pid_normalize(pinfo, sband->n_bitrates);
-
- /* Compute the proportional, integral and derivative errors. */
- err_prop = (pinfo->target - pf) << RC_PID_ARITH_SHIFT;
-
- err_avg = spinfo->err_avg_sc >> pinfo->smoothing_shift;
- spinfo->err_avg_sc = spinfo->err_avg_sc - err_avg + err_prop;
- err_int = spinfo->err_avg_sc >> pinfo->smoothing_shift;
-
- err_der = (pf - spinfo->last_pf) *
- (1 + pinfo->sharpen_factor * spinfo->sharp_cnt);
- spinfo->last_pf = pf;
- if (spinfo->sharp_cnt)
- spinfo->sharp_cnt--;
-
-#ifdef CONFIG_MAC80211_DEBUGFS
- rate_control_pid_event_pf_sample(&spinfo->events, pf, err_prop, err_int,
- err_der);
-#endif
-
- /* Compute the controller output. */
- adj = (err_prop * pinfo->coeff_p + err_int * pinfo->coeff_i
- + err_der * pinfo->coeff_d);
- adj = RC_PID_DO_ARITH_RIGHT_SHIFT(adj, 2 * RC_PID_ARITH_SHIFT);
-
- /* Change rate. */
- if (adj)
- rate_control_pid_adjust_rate(sband, sta, spinfo, adj, rinfo);
-}
-
-static void rate_control_pid_tx_status(void *priv, struct ieee80211_supported_band *sband,
- struct ieee80211_sta *sta, void *priv_sta,
- struct sk_buff *skb)
-{
- struct rc_pid_info *pinfo = priv;
- struct rc_pid_sta_info *spinfo = priv_sta;
- unsigned long period;
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-
- if (!spinfo)
- return;
-
- /* Ignore all frames that were sent with a different rate than the rate
- * we currently advise mac80211 to use. */
- if (info->status.rates[0].idx != spinfo->txrate_idx)
- return;
-
- spinfo->tx_num_xmit++;
-
-#ifdef CONFIG_MAC80211_DEBUGFS
- rate_control_pid_event_tx_status(&spinfo->events, info);
-#endif
-
- /* We count frames that totally failed to be transmitted as two bad
- * frames, those that made it out but had some retries as one good and
- * one bad frame. */
- if (!(info->flags & IEEE80211_TX_STAT_ACK)) {
- spinfo->tx_num_failed += 2;
- spinfo->tx_num_xmit++;
- } else if (info->status.rates[0].count > 1) {
- spinfo->tx_num_failed++;
- spinfo->tx_num_xmit++;
- }
-
- /* Update PID controller state. */
- period = msecs_to_jiffies(pinfo->sampling_period);
- if (time_after(jiffies, spinfo->last_sample + period))
- rate_control_pid_sample(pinfo, sband, sta, spinfo);
-}
-
-static void
-rate_control_pid_get_rate(void *priv, struct ieee80211_sta *sta,
- void *priv_sta,
- struct ieee80211_tx_rate_control *txrc)
-{
- struct sk_buff *skb = txrc->skb;
- struct ieee80211_supported_band *sband = txrc->sband;
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- struct rc_pid_sta_info *spinfo = priv_sta;
- int rateidx;
-
- if (txrc->rts)
- info->control.rates[0].count =
- txrc->hw->conf.long_frame_max_tx_count;
- else
- info->control.rates[0].count =
- txrc->hw->conf.short_frame_max_tx_count;
-
- /* Send management frames and NO_ACK data using lowest rate. */
- if (rate_control_send_low(sta, priv_sta, txrc))
- return;
-
- rateidx = spinfo->txrate_idx;
-
- if (rateidx >= sband->n_bitrates)
- rateidx = sband->n_bitrates - 1;
-
- info->control.rates[0].idx = rateidx;
-
-#ifdef CONFIG_MAC80211_DEBUGFS
- rate_control_pid_event_tx_rate(&spinfo->events,
- rateidx, sband->bitrates[rateidx].bitrate);
-#endif
-}
-
-static void
-rate_control_pid_rate_init(void *priv, struct ieee80211_supported_band *sband,
- struct cfg80211_chan_def *chandef,
- struct ieee80211_sta *sta, void *priv_sta)
-{
- struct rc_pid_sta_info *spinfo = priv_sta;
- struct rc_pid_info *pinfo = priv;
- struct rc_pid_rateinfo *rinfo = pinfo->rinfo;
- int i, j, tmp;
- bool s;
-
- /* TODO: This routine should consider using RSSI from previous packets
- * as we need to have IEEE 802.1X auth succeed immediately after assoc..
- * Until that method is implemented, we will use the lowest supported
- * rate as a workaround. */
-
- /* Sort the rates. This is optimized for the most common case (i.e.
- * almost-sorted CCK+OFDM rates). Kind of bubble-sort with reversed
- * mapping too. */
- for (i = 0; i < sband->n_bitrates; i++) {
- rinfo[i].index = i;
- rinfo[i].rev_index = i;
- if (RC_PID_FAST_START)
- rinfo[i].diff = 0;
- else
- rinfo[i].diff = i * pinfo->norm_offset;
- }
- for (i = 1; i < sband->n_bitrates; i++) {
- s = false;
- for (j = 0; j < sband->n_bitrates - i; j++)
- if (unlikely(sband->bitrates[rinfo[j].index].bitrate >
- sband->bitrates[rinfo[j + 1].index].bitrate)) {
- tmp = rinfo[j].index;
- rinfo[j].index = rinfo[j + 1].index;
- rinfo[j + 1].index = tmp;
- rinfo[rinfo[j].index].rev_index = j;
- rinfo[rinfo[j + 1].index].rev_index = j + 1;
- s = true;
- }
- if (!s)
- break;
- }
-
- spinfo->txrate_idx = rate_lowest_index(sband, sta);
-}
-
-static void *rate_control_pid_alloc(struct ieee80211_hw *hw,
- struct dentry *debugfsdir)
-{
- struct rc_pid_info *pinfo;
- struct rc_pid_rateinfo *rinfo;
- struct ieee80211_supported_band *sband;
- int i, max_rates = 0;
-#ifdef CONFIG_MAC80211_DEBUGFS
- struct rc_pid_debugfs_entries *de;
-#endif
-
- pinfo = kmalloc(sizeof(*pinfo), GFP_ATOMIC);
- if (!pinfo)
- return NULL;
-
- for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
- sband = hw->wiphy->bands[i];
- if (sband && sband->n_bitrates > max_rates)
- max_rates = sband->n_bitrates;
- }
-
- rinfo = kmalloc(sizeof(*rinfo) * max_rates, GFP_ATOMIC);
- if (!rinfo) {
- kfree(pinfo);
- return NULL;
- }
-
- pinfo->target = RC_PID_TARGET_PF;
- pinfo->sampling_period = RC_PID_INTERVAL;
- pinfo->coeff_p = RC_PID_COEFF_P;
- pinfo->coeff_i = RC_PID_COEFF_I;
- pinfo->coeff_d = RC_PID_COEFF_D;
- pinfo->smoothing_shift = RC_PID_SMOOTHING_SHIFT;
- pinfo->sharpen_factor = RC_PID_SHARPENING_FACTOR;
- pinfo->sharpen_duration = RC_PID_SHARPENING_DURATION;
- pinfo->norm_offset = RC_PID_NORM_OFFSET;
- pinfo->rinfo = rinfo;
- pinfo->oldrate = 0;
-
-#ifdef CONFIG_MAC80211_DEBUGFS
- de = &pinfo->dentries;
- de->target = debugfs_create_u32("target_pf", S_IRUSR | S_IWUSR,
- debugfsdir, &pinfo->target);
- de->sampling_period = debugfs_create_u32("sampling_period",
- S_IRUSR | S_IWUSR, debugfsdir,
- &pinfo->sampling_period);
- de->coeff_p = debugfs_create_u32("coeff_p", S_IRUSR | S_IWUSR,
- debugfsdir, (u32 *)&pinfo->coeff_p);
- de->coeff_i = debugfs_create_u32("coeff_i", S_IRUSR | S_IWUSR,
- debugfsdir, (u32 *)&pinfo->coeff_i);
- de->coeff_d = debugfs_create_u32("coeff_d", S_IRUSR | S_IWUSR,
- debugfsdir, (u32 *)&pinfo->coeff_d);
- de->smoothing_shift = debugfs_create_u32("smoothing_shift",
- S_IRUSR | S_IWUSR, debugfsdir,
- &pinfo->smoothing_shift);
- de->sharpen_factor = debugfs_create_u32("sharpen_factor",
- S_IRUSR | S_IWUSR, debugfsdir,
- &pinfo->sharpen_factor);
- de->sharpen_duration = debugfs_create_u32("sharpen_duration",
- S_IRUSR | S_IWUSR, debugfsdir,
- &pinfo->sharpen_duration);
- de->norm_offset = debugfs_create_u32("norm_offset",
- S_IRUSR | S_IWUSR, debugfsdir,
- &pinfo->norm_offset);
-#endif
-
- return pinfo;
-}
-
-static void rate_control_pid_free(void *priv)
-{
- struct rc_pid_info *pinfo = priv;
-#ifdef CONFIG_MAC80211_DEBUGFS
- struct rc_pid_debugfs_entries *de = &pinfo->dentries;
-
- debugfs_remove(de->norm_offset);
- debugfs_remove(de->sharpen_duration);
- debugfs_remove(de->sharpen_factor);
- debugfs_remove(de->smoothing_shift);
- debugfs_remove(de->coeff_d);
- debugfs_remove(de->coeff_i);
- debugfs_remove(de->coeff_p);
- debugfs_remove(de->sampling_period);
- debugfs_remove(de->target);
-#endif
-
- kfree(pinfo->rinfo);
- kfree(pinfo);
-}
-
-static void *rate_control_pid_alloc_sta(void *priv, struct ieee80211_sta *sta,
- gfp_t gfp)
-{
- struct rc_pid_sta_info *spinfo;
-
- spinfo = kzalloc(sizeof(*spinfo), gfp);
- if (spinfo == NULL)
- return NULL;
-
- spinfo->last_sample = jiffies;
-
-#ifdef CONFIG_MAC80211_DEBUGFS
- spin_lock_init(&spinfo->events.lock);
- init_waitqueue_head(&spinfo->events.waitqueue);
-#endif
-
- return spinfo;
-}
-
-static void rate_control_pid_free_sta(void *priv, struct ieee80211_sta *sta,
- void *priv_sta)
-{
- kfree(priv_sta);
-}
-
-static const struct rate_control_ops mac80211_rcpid = {
- .name = "pid",
- .tx_status = rate_control_pid_tx_status,
- .get_rate = rate_control_pid_get_rate,
- .rate_init = rate_control_pid_rate_init,
- .alloc = rate_control_pid_alloc,
- .free = rate_control_pid_free,
- .alloc_sta = rate_control_pid_alloc_sta,
- .free_sta = rate_control_pid_free_sta,
-#ifdef CONFIG_MAC80211_DEBUGFS
- .add_sta_debugfs = rate_control_pid_add_sta_debugfs,
- .remove_sta_debugfs = rate_control_pid_remove_sta_debugfs,
-#endif
-};
-
-int __init rc80211_pid_init(void)
-{
- return ieee80211_rate_control_register(&mac80211_rcpid);
-}
-
-void rc80211_pid_exit(void)
-{
- ieee80211_rate_control_unregister(&mac80211_rcpid);
-}
diff --git a/net/mac80211/rc80211_pid_debugfs.c b/net/mac80211/rc80211_pid_debugfs.c
deleted file mode 100644
index 6ff134650a84..000000000000
--- a/net/mac80211/rc80211_pid_debugfs.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * Copyright 2007, Mattias Nissler <mattias.nissler@gmx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/poll.h>
-#include <linux/netdevice.h>
-#include <linux/types.h>
-#include <linux/skbuff.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-
-#include <net/mac80211.h>
-#include "rate.h"
-
-#include "rc80211_pid.h"
-
-static void rate_control_pid_event(struct rc_pid_event_buffer *buf,
- enum rc_pid_event_type type,
- union rc_pid_event_data *data)
-{
- struct rc_pid_event *ev;
- unsigned long status;
-
- spin_lock_irqsave(&buf->lock, status);
- ev = &(buf->ring[buf->next_entry]);
- buf->next_entry = (buf->next_entry + 1) % RC_PID_EVENT_RING_SIZE;
-
- ev->timestamp = jiffies;
- ev->id = buf->ev_count++;
- ev->type = type;
- ev->data = *data;
-
- spin_unlock_irqrestore(&buf->lock, status);
-
- wake_up_all(&buf->waitqueue);
-}
-
-void rate_control_pid_event_tx_status(struct rc_pid_event_buffer *buf,
- struct ieee80211_tx_info *stat)
-{
- union rc_pid_event_data evd;
-
- evd.flags = stat->flags;
- memcpy(&evd.tx_status, stat, sizeof(struct ieee80211_tx_info));
- rate_control_pid_event(buf, RC_PID_EVENT_TYPE_TX_STATUS, &evd);
-}
-
-void rate_control_pid_event_rate_change(struct rc_pid_event_buffer *buf,
- int index, int rate)
-{
- union rc_pid_event_data evd;
-
- evd.index = index;
- evd.rate = rate;
- rate_control_pid_event(buf, RC_PID_EVENT_TYPE_RATE_CHANGE, &evd);
-}
-
-void rate_control_pid_event_tx_rate(struct rc_pid_event_buffer *buf,
- int index, int rate)
-{
- union rc_pid_event_data evd;
-
- evd.index = index;
- evd.rate = rate;
- rate_control_pid_event(buf, RC_PID_EVENT_TYPE_TX_RATE, &evd);
-}
-
-void rate_control_pid_event_pf_sample(struct rc_pid_event_buffer *buf,
- s32 pf_sample, s32 prop_err,
- s32 int_err, s32 der_err)
-{
- union rc_pid_event_data evd;
-
- evd.pf_sample = pf_sample;
- evd.prop_err = prop_err;
- evd.int_err = int_err;
- evd.der_err = der_err;
- rate_control_pid_event(buf, RC_PID_EVENT_TYPE_PF_SAMPLE, &evd);
-}
-
-static int rate_control_pid_events_open(struct inode *inode, struct file *file)
-{
- struct rc_pid_sta_info *sinfo = inode->i_private;
- struct rc_pid_event_buffer *events = &sinfo->events;
- struct rc_pid_events_file_info *file_info;
- unsigned long status;
-
- /* Allocate a state struct */
- file_info = kmalloc(sizeof(*file_info), GFP_KERNEL);
- if (file_info == NULL)
- return -ENOMEM;
-
- spin_lock_irqsave(&events->lock, status);
-
- file_info->next_entry = events->next_entry;
- file_info->events = events;
-
- spin_unlock_irqrestore(&events->lock, status);
-
- file->private_data = file_info;
-
- return 0;
-}
-
-static int rate_control_pid_events_release(struct inode *inode,
- struct file *file)
-{
- struct rc_pid_events_file_info *file_info = file->private_data;
-
- kfree(file_info);
-
- return 0;
-}
-
-static unsigned int rate_control_pid_events_poll(struct file *file,
- poll_table *wait)
-{
- struct rc_pid_events_file_info *file_info = file->private_data;
-
- poll_wait(file, &file_info->events->waitqueue, wait);
-
- return POLLIN | POLLRDNORM;
-}
-
-#define RC_PID_PRINT_BUF_SIZE 64
-
-static ssize_t rate_control_pid_events_read(struct file *file, char __user *buf,
- size_t length, loff_t *offset)
-{
- struct rc_pid_events_file_info *file_info = file->private_data;
- struct rc_pid_event_buffer *events = file_info->events;
- struct rc_pid_event *ev;
- char pb[RC_PID_PRINT_BUF_SIZE];
- int ret;
- int p;
- unsigned long status;
-
- /* Check if there is something to read. */
- if (events->next_entry == file_info->next_entry) {
- if (file->f_flags & O_NONBLOCK)
- return -EAGAIN;
-
- /* Wait */
- ret = wait_event_interruptible(events->waitqueue,
- events->next_entry != file_info->next_entry);
-
- if (ret)
- return ret;
- }
-
- /* Write out one event per call. I don't care whether it's a little
- * inefficient, this is debugging code anyway. */
- spin_lock_irqsave(&events->lock, status);
-
- /* Get an event */
- ev = &(events->ring[file_info->next_entry]);
- file_info->next_entry = (file_info->next_entry + 1) %
- RC_PID_EVENT_RING_SIZE;
-
- /* Print information about the event. Note that userspace needs to
- * provide large enough buffers. */
- length = length < RC_PID_PRINT_BUF_SIZE ?
- length : RC_PID_PRINT_BUF_SIZE;
- p = scnprintf(pb, length, "%u %lu ", ev->id, ev->timestamp);
- switch (ev->type) {
- case RC_PID_EVENT_TYPE_TX_STATUS:
- p += scnprintf(pb + p, length - p, "tx_status %u %u",
- !(ev->data.flags & IEEE80211_TX_STAT_ACK),
- ev->data.tx_status.status.rates[0].idx);
- break;
- case RC_PID_EVENT_TYPE_RATE_CHANGE:
- p += scnprintf(pb + p, length - p, "rate_change %d %d",
- ev->data.index, ev->data.rate);
- break;
- case RC_PID_EVENT_TYPE_TX_RATE:
- p += scnprintf(pb + p, length - p, "tx_rate %d %d",
- ev->data.index, ev->data.rate);
- break;
- case RC_PID_EVENT_TYPE_PF_SAMPLE:
- p += scnprintf(pb + p, length - p,
- "pf_sample %d %d %d %d",
- ev->data.pf_sample, ev->data.prop_err,
- ev->data.int_err, ev->data.der_err);
- break;
- }
- p += scnprintf(pb + p, length - p, "\n");
-
- spin_unlock_irqrestore(&events->lock, status);
-
- if (copy_to_user(buf, pb, p))
- return -EFAULT;
-
- return p;
-}
-
-#undef RC_PID_PRINT_BUF_SIZE
-
-static const struct file_operations rc_pid_fop_events = {
- .owner = THIS_MODULE,
- .read = rate_control_pid_events_read,
- .poll = rate_control_pid_events_poll,
- .open = rate_control_pid_events_open,
- .release = rate_control_pid_events_release,
- .llseek = noop_llseek,
-};
-
-void rate_control_pid_add_sta_debugfs(void *priv, void *priv_sta,
- struct dentry *dir)
-{
- struct rc_pid_sta_info *spinfo = priv_sta;
-
- spinfo->events_entry = debugfs_create_file("rc_pid_events", S_IRUGO,
- dir, spinfo,
- &rc_pid_fop_events);
-}
-
-void rate_control_pid_remove_sta_debugfs(void *priv, void *priv_sta)
-{
- struct rc_pid_sta_info *spinfo = priv_sta;
-
- debugfs_remove(spinfo->events_entry);
-}