summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/kernel-parameters.txt5
-rw-r--r--Documentation/laptops/thinkpad-acpi.txt58
-rw-r--r--arch/x86/kernel/acpi/sleep.c2
-rw-r--r--drivers/acpi/sleep.c29
-rw-r--r--drivers/acpi/video.c8
-rw-r--r--drivers/char/ipmi/ipmi_si_intf.c4
-rw-r--r--drivers/platform/x86/Kconfig28
-rw-r--r--drivers/platform/x86/dell-wmi.c9
-rw-r--r--drivers/platform/x86/hp-wmi.c9
-rw-r--r--drivers/platform/x86/msi-wmi.c9
-rw-r--r--drivers/platform/x86/thinkpad_acpi.c59
-rw-r--r--drivers/platform/x86/wmi.c30
-rw-r--r--include/linux/acpi.h1
13 files changed, 207 insertions, 44 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 5ba4d9dff113..736d45602886 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -240,7 +240,7 @@ and is between 256 and 4096 characters. It is defined in the file
acpi_sleep= [HW,ACPI] Sleep options
Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
- old_ordering, s4_nonvs }
+ old_ordering, s4_nonvs, sci_force_enable }
See Documentation/power/video.txt for information on
s3_bios and s3_mode.
s3_beep is for debugging; it makes the PC's speaker beep
@@ -253,6 +253,9 @@ and is between 256 and 4096 characters. It is defined in the file
of _PTS is used by default).
s4_nonvs prevents the kernel from saving/restoring the
ACPI NVS memory during hibernation.
+ sci_force_enable causes the kernel to set SCI_EN directly
+ on resume from S1/S3 (which is against the ACPI spec,
+ but some broken systems don't work without it).
acpi_use_timer_override [HW,ACPI]
Use timer override. For some broken Nvidia NF5 boards
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 169091f75e6d..75afa1229fd7 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -1092,8 +1092,8 @@ WARNING:
its level up and down at every change.
-Volume control
---------------
+Volume control (Console Audio control)
+--------------------------------------
procfs: /proc/acpi/ibm/volume
ALSA: "ThinkPad Console Audio Control", default ID: "ThinkPadEC"
@@ -1110,9 +1110,53 @@ the desktop environment to just provide on-screen-display feedback.
Software volume control should be done only in the main AC97/HDA
mixer.
-This feature allows volume control on ThinkPad models with a digital
-volume knob (when available, not all models have it), as well as
-mute/unmute control. The available commands are:
+
+About the ThinkPad Console Audio control:
+
+ThinkPads have a built-in amplifier and muting circuit that drives the
+console headphone and speakers. This circuit is after the main AC97
+or HDA mixer in the audio path, and under exclusive control of the
+firmware.
+
+ThinkPads have three special hotkeys to interact with the console
+audio control: volume up, volume down and mute.
+
+It is worth noting that the normal way the mute function works (on
+ThinkPads that do not have a "mute LED") is:
+
+1. Press mute to mute. It will *always* mute, you can press it as
+ many times as you want, and the sound will remain mute.
+
+2. Press either volume key to unmute the ThinkPad (it will _not_
+ change the volume, it will just unmute).
+
+This is a very superior design when compared to the cheap software-only
+mute-toggle solution found on normal consumer laptops: you can be
+absolutely sure the ThinkPad will not make noise if you press the mute
+button, no matter the previous state.
+
+The IBM ThinkPads, and the earlier Lenovo ThinkPads have variable-gain
+amplifiers driving the speakers and headphone output, and the firmware
+also handles volume control for the headphone and speakers on these
+ThinkPads without any help from the operating system (this volume
+control stage exists after the main AC97 or HDA mixer in the audio
+path).
+
+The newer Lenovo models only have firmware mute control, and depend on
+the main HDA mixer to do volume control (which is done by the operating
+system). In this case, the volume keys are filtered out for unmute
+key press (there are some firmware bugs in this area) and delivered as
+normal key presses to the operating system (thinkpad-acpi is not
+involved).
+
+
+The ThinkPad-ACPI volume control:
+
+The preferred way to interact with the Console Audio control is the
+ALSA interface.
+
+The legacy procfs interface allows one to read the current state,
+and if volume control is enabled, accepts the following commands:
echo up >/proc/acpi/ibm/volume
echo down >/proc/acpi/ibm/volume
@@ -1121,12 +1165,10 @@ mute/unmute control. The available commands are:
echo 'level <level>' >/proc/acpi/ibm/volume
The <level> number range is 0 to 14 although not all of them may be
-distinct. The unmute the volume after the mute command, use either the
+distinct. To unmute the volume after the mute command, use either the
up or down command (the level command will not unmute the volume), or
the unmute command.
-The current volume level and mute state is shown in the file.
-
You can use the volume_capabilities parameter to tell the driver
whether your thinkpad has volume control or mute-only control:
volume_capabilities=1 for mixers with mute and volume control,
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 82e508677b91..f9961034e557 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -162,6 +162,8 @@ static int __init acpi_sleep_setup(char *str)
#endif
if (strncmp(str, "old_ordering", 12) == 0)
acpi_old_suspend_ordering();
+ if (strncmp(str, "sci_force_enable", 16) == 0)
+ acpi_set_sci_en_on_resume();
str = strchr(str, ',');
if (str != NULL)
str += strspn(str, ", \t");
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 5f2c379ab7bf..79d33d908b5a 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -81,6 +81,23 @@ static int acpi_sleep_prepare(u32 acpi_state)
#ifdef CONFIG_ACPI_SLEEP
static u32 acpi_target_sleep_state = ACPI_STATE_S0;
/*
+ * According to the ACPI specification the BIOS should make sure that ACPI is
+ * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still,
+ * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
+ * on such systems during resume. Unfortunately that doesn't help in
+ * particularly pathological cases in which SCI_EN has to be set directly on
+ * resume, although the specification states very clearly that this flag is
+ * owned by the hardware. The set_sci_en_on_resume variable will be set in such
+ * cases.
+ */
+static bool set_sci_en_on_resume;
+
+void __init acpi_set_sci_en_on_resume(void)
+{
+ set_sci_en_on_resume = true;
+}
+
+/*
* ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
* user to request that behavior by using the 'acpi_old_suspend_ordering'
* kernel command line option that causes the following variable to be set.
@@ -170,18 +187,6 @@ static void acpi_pm_end(void)
#endif /* CONFIG_ACPI_SLEEP */
#ifdef CONFIG_SUSPEND
-/*
- * According to the ACPI specification the BIOS should make sure that ACPI is
- * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still,
- * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
- * on such systems during resume. Unfortunately that doesn't help in
- * particularly pathological cases in which SCI_EN has to be set directly on
- * resume, although the specification states very clearly that this flag is
- * owned by the hardware. The set_sci_en_on_resume variable will be set in such
- * cases.
- */
-static bool set_sci_en_on_resume;
-
extern void do_suspend_lowlevel(void);
static u32 acpi_suspend_states[] = {
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 05dff631591c..72e76b4b6538 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -999,8 +999,10 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
sprintf(name, "acpi_video%d", count++);
device->backlight = backlight_device_register(name,
NULL, device, &acpi_backlight_ops);
- device->backlight->props.max_brightness = device->brightness->count-3;
kfree(name);
+ if (IS_ERR(device->backlight))
+ return;
+ device->backlight->props.max_brightness = device->brightness->count-3;
result = sysfs_create_link(&device->backlight->dev.kobj,
&device->dev->dev.kobj, "device");
@@ -1979,6 +1981,10 @@ acpi_video_switch_brightness(struct acpi_video_device *device, int event)
unsigned long long level_current, level_next;
int result = -EINVAL;
+ /* no warning message if acpi_backlight=vendor is used */
+ if (!acpi_video_backlight_support())
+ return 0;
+
if (!device->brightness)
goto out;
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 679cd08b80b4..176f1751237f 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -3204,7 +3204,7 @@ static __devinit int init_ipmi_si(void)
#ifdef CONFIG_ACPI
spmi_find_bmc();
#endif
-#ifdef CONFIG_PNP
+#ifdef CONFIG_ACPI
pnp_register_driver(&ipmi_pnp_driver);
#endif
@@ -3330,7 +3330,7 @@ static __exit void cleanup_ipmi_si(void)
#ifdef CONFIG_PCI
pci_unregister_driver(&ipmi_pci_driver);
#endif
-#ifdef CONFIG_PNP
+#ifdef CONFIG_ACPI
pnp_unregister_driver(&ipmi_pnp_driver);
#endif
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index ec4faffe6b05..db32c25e3605 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -231,8 +231,36 @@ config THINKPAD_ACPI
This driver was formerly known as ibm-acpi.
+ Extra functionality will be available if the rfkill (CONFIG_RFKILL)
+ and/or ALSA (CONFIG_SND) subsystems are available in the kernel.
+ Note that if you want ThinkPad-ACPI to be built-in instead of
+ modular, ALSA and rfkill will also have to be built-in.
+
If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
+config THINKPAD_ACPI_ALSA_SUPPORT
+ bool "Console audio control ALSA interface"
+ depends on THINKPAD_ACPI
+ depends on SND
+ depends on SND = y || THINKPAD_ACPI = SND
+ default y
+ ---help---
+ Enables monitoring of the built-in console audio output control
+ (headphone and speakers), which is operated by the mute and (in
+ some ThinkPad models) volume hotkeys.
+
+ If this option is enabled, ThinkPad-ACPI will export an ALSA card
+ with a single read-only mixer control, which should be used for
+ on-screen-display feedback purposes by the Desktop Environment.
+
+ Optionally, the driver will also allow software control (the
+ ALSA mixer will be made read-write). Please refer to the driver
+ documentation for details.
+
+ All IBM models have both volume and mute control. Newer Lenovo
+ models only have mute control (the volume hotkeys are just normal
+ keys and volume control is done through the main HDA mixer).
+
config THINKPAD_ACPI_DEBUGFACILITIES
bool "Maintainer debug facilities"
depends on THINKPAD_ACPI
diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c
index 4c7e70299d6b..1b1dddbd5744 100644
--- a/drivers/platform/x86/dell-wmi.c
+++ b/drivers/platform/x86/dell-wmi.c
@@ -202,8 +202,13 @@ static void dell_wmi_notify(u32 value, void *context)
struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL };
static struct key_entry *key;
union acpi_object *obj;
+ acpi_status status;
- wmi_get_event_data(value, &response);
+ status = wmi_get_event_data(value, &response);
+ if (status != AE_OK) {
+ printk(KERN_INFO "dell-wmi: bad event status 0x%x\n", status);
+ return;
+ }
obj = (union acpi_object *)response.pointer;
@@ -325,7 +330,7 @@ static int __init dell_wmi_init(void)
int err;
acpi_status status;
- if (wmi_has_guid(DELL_EVENT_GUID)) {
+ if (!wmi_has_guid(DELL_EVENT_GUID)) {
printk(KERN_WARNING "dell-wmi: No known WMI GUID found\n");
return -ENODEV;
}
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 8781d8fa7a57..5b648f0c6075 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -338,8 +338,13 @@ static void hp_wmi_notify(u32 value, void *context)
static struct key_entry *key;
union acpi_object *obj;
int eventcode;
+ acpi_status status;
- wmi_get_event_data(value, &response);
+ status = wmi_get_event_data(value, &response);
+ if (status != AE_OK) {
+ printk(KERN_INFO "hp-wmi: bad event status 0x%x\n", status);
+ return;
+ }
obj = (union acpi_object *)response.pointer;
@@ -581,7 +586,7 @@ static int __init hp_wmi_init(void)
if (wmi_has_guid(HPWMI_EVENT_GUID)) {
err = wmi_install_notify_handler(HPWMI_EVENT_GUID,
hp_wmi_notify, NULL);
- if (!err)
+ if (ACPI_SUCCESS(err))
hp_wmi_input_setup();
}
diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c
index 7f77f908bb01..f5f70d4c6913 100644
--- a/drivers/platform/x86/msi-wmi.c
+++ b/drivers/platform/x86/msi-wmi.c
@@ -149,8 +149,13 @@ static void msi_wmi_notify(u32 value, void *context)
static struct key_entry *key;
union acpi_object *obj;
ktime_t cur;
+ acpi_status status;
- wmi_get_event_data(value, &response);
+ status = wmi_get_event_data(value, &response);
+ if (status != AE_OK) {
+ printk(KERN_INFO DRV_PFX "bad event status 0x%x\n", status);
+ return;
+ }
obj = (union acpi_object *)response.pointer;
@@ -236,7 +241,7 @@ static int __init msi_wmi_init(void)
}
err = wmi_install_notify_handler(MSIWMI_EVENT_GUID,
msi_wmi_notify, NULL);
- if (err)
+ if (ACPI_FAILURE(err))
return -EINVAL;
err = msi_wmi_input_setup();
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 448c8aeb166b..e67e4feb35cb 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -6384,11 +6384,13 @@ static struct ibm_struct brightness_driver_data = {
* and we leave them unchanged.
*/
+#ifdef CONFIG_THINKPAD_ACPI_ALSA_SUPPORT
+
#define TPACPI_ALSA_DRVNAME "ThinkPad EC"
#define TPACPI_ALSA_SHRTNAME "ThinkPad Console Audio Control"
#define TPACPI_ALSA_MIXERNAME TPACPI_ALSA_SHRTNAME
-static int alsa_index = SNDRV_DEFAULT_IDX1;
+static int alsa_index = ~((1 << (SNDRV_CARDS - 3)) - 1); /* last three slots */
static char *alsa_id = "ThinkPadEC";
static int alsa_enable = SNDRV_DEFAULT_ENABLE1;
@@ -6705,10 +6707,11 @@ static int __init volume_create_alsa_mixer(void)
rc = snd_card_create(alsa_index, alsa_id, THIS_MODULE,
sizeof(struct tpacpi_alsa_data), &card);
- if (rc < 0)
- return rc;
- if (!card)
- return -ENOMEM;
+ if (rc < 0 || !card) {
+ printk(TPACPI_ERR
+ "Failed to create ALSA card structures: %d\n", rc);
+ return 1;
+ }
BUG_ON(!card->private_data);
data = card->private_data;
@@ -6741,8 +6744,9 @@ static int __init volume_create_alsa_mixer(void)
rc = snd_ctl_add(card, ctl_vol);
if (rc < 0) {
printk(TPACPI_ERR
- "Failed to create ALSA volume control\n");
- goto err_out;
+ "Failed to create ALSA volume control: %d\n",
+ rc);
+ goto err_exit;
}
data->ctl_vol_id = &ctl_vol->id;
}
@@ -6750,22 +6754,25 @@ static int __init volume_create_alsa_mixer(void)
ctl_mute = snd_ctl_new1(&volume_alsa_control_mute, NULL);
rc = snd_ctl_add(card, ctl_mute);
if (rc < 0) {
- printk(TPACPI_ERR "Failed to create ALSA mute control\n");
- goto err_out;
+ printk(TPACPI_ERR "Failed to create ALSA mute control: %d\n",
+ rc);
+ goto err_exit;
}
data->ctl_mute_id = &ctl_mute->id;
snd_card_set_dev(card, &tpacpi_pdev->dev);
rc = snd_card_register(card);
-
-err_out:
if (rc < 0) {
- snd_card_free(card);
- card = NULL;
+ printk(TPACPI_ERR "Failed to register ALSA card: %d\n", rc);
+ goto err_exit;
}
alsa_card = card;
- return rc;
+ return 0;
+
+err_exit:
+ snd_card_free(card);
+ return 1;
}
#define TPACPI_VOL_Q_MUTEONLY 0x0001 /* Mute-only control available */
@@ -7016,6 +7023,28 @@ static struct ibm_struct volume_driver_data = {
.shutdown = volume_shutdown,
};
+#else /* !CONFIG_THINKPAD_ACPI_ALSA_SUPPORT */
+
+#define alsa_card NULL
+
+static void inline volume_alsa_notify_change(void)
+{
+}
+
+static int __init volume_init(struct ibm_init_struct *iibm)
+{
+ printk(TPACPI_INFO
+ "volume: disabled as there is no ALSA support in this kernel\n");
+
+ return 1;
+}
+
+static struct ibm_struct volume_driver_data = {
+ .name = "volume",
+};
+
+#endif /* CONFIG_THINKPAD_ACPI_ALSA_SUPPORT */
+
/*************************************************************************
* Fan subdriver
*/
@@ -8738,6 +8767,7 @@ MODULE_PARM_DESC(hotkey_report_mode,
"used for backwards compatibility with userspace, "
"see documentation");
+#ifdef CONFIG_THINKPAD_ACPI_ALSA_SUPPORT
module_param_named(volume_mode, volume_mode, uint, 0444);
MODULE_PARM_DESC(volume_mode,
"Selects volume control strategy: "
@@ -8760,6 +8790,7 @@ module_param_named(id, alsa_id, charp, 0444);
MODULE_PARM_DESC(id, "ALSA id for the ACPI EC Mixer");
module_param_named(enable, alsa_enable, bool, 0444);
MODULE_PARM_DESC(enable, "Enable the ALSA interface for the ACPI EC Mixer");
+#endif /* CONFIG_THINKPAD_ACPI_ALSA_SUPPORT */
#define TPACPI_PARAM(feature) \
module_param_call(feature, set_ibm_param, NULL, NULL, 0); \
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index cc9ad740bda1..b104302fea0a 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -714,6 +714,22 @@ static int wmi_class_init(void)
return ret;
}
+static bool guid_already_parsed(const char *guid_string)
+{
+ struct guid_block *gblock;
+ struct wmi_block *wblock;
+ struct list_head *p;
+
+ list_for_each(p, &wmi_blocks.list) {
+ wblock = list_entry(p, struct wmi_block, list);
+ gblock = &wblock->gblock;
+
+ if (strncmp(gblock->guid, guid_string, 16) == 0)
+ return true;
+ }
+ return false;
+}
+
/*
* Parse the _WDG method for the GUID data blocks
*/
@@ -723,6 +739,7 @@ static __init acpi_status parse_wdg(acpi_handle handle)
union acpi_object *obj;
struct guid_block *gblock;
struct wmi_block *wblock;
+ char guid_string[37];
acpi_status status;
u32 i, total;
@@ -745,6 +762,19 @@ static __init acpi_status parse_wdg(acpi_handle handle)
memcpy(gblock, obj->buffer.pointer, obj->buffer.length);
for (i = 0; i < total; i++) {
+ /*
+ Some WMI devices, like those for nVidia hooks, have a
+ duplicate GUID. It's not clear what we should do in this
+ case yet, so for now, we'll just ignore the duplicate.
+ Anyone who wants to add support for that device can come
+ up with a better workaround for the mess then.
+ */
+ if (guid_already_parsed(gblock[i].guid) == true) {
+ wmi_gtoa(gblock[i].guid, guid_string);
+ printk(KERN_INFO PREFIX "Skipping duplicate GUID %s\n",
+ guid_string);
+ continue;
+ }
wblock = kzalloc(sizeof(struct wmi_block), GFP_KERNEL);
if (!wblock)
return AE_NO_MEMORY;
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index ce945d4845fc..36924255c0d5 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -251,6 +251,7 @@ int acpi_check_mem_region(resource_size_t start, resource_size_t n,
void __init acpi_no_s4_hw_signature(void);
void __init acpi_old_suspend_ordering(void);
void __init acpi_s4_no_nvs(void);
+void __init acpi_set_sci_en_on_resume(void);
#endif /* CONFIG_PM_SLEEP */
struct acpi_osc_context {