summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/kernel-parameters.txt6
-rw-r--r--arch/x86/kernel/acpi/sleep.c2
-rw-r--r--drivers/acpi/sleep/main.c276
-rw-r--r--drivers/base/power/main.c2
-rw-r--r--include/linux/acpi.h3
-rw-r--r--include/linux/suspend.h14
-rw-r--r--kernel/power/disk.c28
-rw-r--r--kernel/power/main.c10
8 files changed, 215 insertions, 126 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 9cf7b34f2db0..18d793ea0dd3 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -147,10 +147,14 @@ and is between 256 and 4096 characters. It is defined in the file
default: 0
acpi_sleep= [HW,ACPI] Sleep options
- Format: { s3_bios, s3_mode, s3_beep }
+ Format: { s3_bios, s3_mode, s3_beep, old_ordering }
See Documentation/power/video.txt for s3_bios and s3_mode.
s3_beep is for debugging; it makes the PC's speaker beep
as soon as the kernel's real-mode entry point is called.
+ old_ordering causes the ACPI 1.0 ordering of the _PTS
+ control method, wrt putting devices into low power
+ states, to be enforced (the ACPI 2.0 ordering of _PTS is
+ used by default).
acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode
Format: { level | edge | high | low }
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index afc25ee9964b..882e970032d5 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -124,6 +124,8 @@ static int __init acpi_sleep_setup(char *str)
acpi_realmode_flags |= 2;
if (strncmp(str, "s3_beep", 7) == 0)
acpi_realmode_flags |= 4;
+ if (strncmp(str, "old_ordering", 12) == 0)
+ acpi_old_suspend_ordering();
str = strchr(str, ',');
if (str != NULL)
str += strspn(str, ", \t");
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index 0f2caea2fc83..4addf8ad50ae 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -24,10 +24,6 @@
u8 sleep_states[ACPI_S_STATE_COUNT];
-#ifdef CONFIG_PM_SLEEP
-static u32 acpi_target_sleep_state = ACPI_STATE_S0;
-#endif
-
static int acpi_sleep_prepare(u32 acpi_state)
{
#ifdef CONFIG_ACPI_SLEEP
@@ -50,9 +46,96 @@ static int acpi_sleep_prepare(u32 acpi_state)
return 0;
}
-#ifdef CONFIG_SUSPEND
-static struct platform_suspend_ops acpi_suspend_ops;
+#ifdef CONFIG_PM_SLEEP
+static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+
+/*
+ * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
+ * user to request that behavior by using the 'acpi_old_suspend_ordering'
+ * kernel command line option that causes the following variable to be set.
+ */
+static bool old_suspend_ordering;
+
+void __init acpi_old_suspend_ordering(void)
+{
+ old_suspend_ordering = true;
+}
+
+/**
+ * acpi_pm_disable_gpes - Disable the GPEs.
+ */
+static int acpi_pm_disable_gpes(void)
+{
+ acpi_hw_disable_all_gpes();
+ return 0;
+}
+
+/**
+ * __acpi_pm_prepare - Prepare the platform to enter the target state.
+ *
+ * If necessary, set the firmware waking vector and do arch-specific
+ * nastiness to get the wakeup code to the waking vector.
+ */
+static int __acpi_pm_prepare(void)
+{
+ int error = acpi_sleep_prepare(acpi_target_sleep_state);
+
+ if (error)
+ acpi_target_sleep_state = ACPI_STATE_S0;
+ return error;
+}
+
+/**
+ * acpi_pm_prepare - Prepare the platform to enter the target sleep
+ * state and disable the GPEs.
+ */
+static int acpi_pm_prepare(void)
+{
+ int error = __acpi_pm_prepare();
+
+ if (!error)
+ acpi_hw_disable_all_gpes();
+ return error;
+}
+
+/**
+ * acpi_pm_finish - Instruct the platform to leave a sleep state.
+ *
+ * This is called after we wake back up (or if entering the sleep state
+ * failed).
+ */
+static void acpi_pm_finish(void)
+{
+ u32 acpi_state = acpi_target_sleep_state;
+
+ if (acpi_state == ACPI_STATE_S0)
+ return;
+ printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
+ acpi_state);
+ acpi_disable_wakeup_device(acpi_state);
+ acpi_leave_sleep_state(acpi_state);
+
+ /* reset firmware waking vector */
+ acpi_set_firmware_waking_vector((acpi_physical_address) 0);
+
+ acpi_target_sleep_state = ACPI_STATE_S0;
+}
+
+/**
+ * acpi_pm_end - Finish up suspend sequence.
+ */
+static void acpi_pm_end(void)
+{
+ /*
+ * This is necessary in case acpi_pm_finish() is not called during a
+ * failing transition to a sleep state.
+ */
+ acpi_target_sleep_state = ACPI_STATE_S0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_SUSPEND
extern void do_suspend_lowlevel(void);
static u32 acpi_suspend_states[] = {
@@ -66,7 +149,6 @@ static u32 acpi_suspend_states[] = {
* acpi_suspend_begin - Set the target system sleep state to the state
* associated with given @pm_state, if supported.
*/
-
static int acpi_suspend_begin(suspend_state_t pm_state)
{
u32 acpi_state = acpi_suspend_states[pm_state];
@@ -83,25 +165,6 @@ static int acpi_suspend_begin(suspend_state_t pm_state)
}
/**
- * acpi_suspend_prepare - Do preliminary suspend work.
- *
- * If necessary, set the firmware waking vector and do arch-specific
- * nastiness to get the wakeup code to the waking vector.
- */
-
-static int acpi_suspend_prepare(void)
-{
- int error = acpi_sleep_prepare(acpi_target_sleep_state);
-
- if (error) {
- acpi_target_sleep_state = ACPI_STATE_S0;
- return error;
- }
-
- return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
-}
-
-/**
* acpi_suspend_enter - Actually enter a sleep state.
* @pm_state: ignored
*
@@ -109,7 +172,6 @@ static int acpi_suspend_prepare(void)
* assembly, which in turn call acpi_enter_sleep_state().
* It's unfortunate, but it works. Please fix if you're feeling frisky.
*/
-
static int acpi_suspend_enter(suspend_state_t pm_state)
{
acpi_status status = AE_OK;
@@ -166,39 +228,6 @@ static int acpi_suspend_enter(suspend_state_t pm_state)
return ACPI_SUCCESS(status) ? 0 : -EFAULT;
}
-/**
- * acpi_suspend_finish - Instruct the platform to leave a sleep state.
- *
- * This is called after we wake back up (or if entering the sleep state
- * failed).
- */
-
-static void acpi_suspend_finish(void)
-{
- u32 acpi_state = acpi_target_sleep_state;
-
- acpi_disable_wakeup_device(acpi_state);
- acpi_leave_sleep_state(acpi_state);
-
- /* reset firmware waking vector */
- acpi_set_firmware_waking_vector((acpi_physical_address) 0);
-
- acpi_target_sleep_state = ACPI_STATE_S0;
-}
-
-/**
- * acpi_suspend_end - Finish up suspend sequence.
- */
-
-static void acpi_suspend_end(void)
-{
- /*
- * This is necessary in case acpi_suspend_finish() is not called during a
- * failing transition to a sleep state.
- */
- acpi_target_sleep_state = ACPI_STATE_S0;
-}
-
static int acpi_suspend_state_valid(suspend_state_t pm_state)
{
u32 acpi_state;
@@ -218,10 +247,39 @@ static int acpi_suspend_state_valid(suspend_state_t pm_state)
static struct platform_suspend_ops acpi_suspend_ops = {
.valid = acpi_suspend_state_valid,
.begin = acpi_suspend_begin,
- .prepare = acpi_suspend_prepare,
+ .prepare = acpi_pm_prepare,
+ .enter = acpi_suspend_enter,
+ .finish = acpi_pm_finish,
+ .end = acpi_pm_end,
+};
+
+/**
+ * acpi_suspend_begin_old - Set the target system sleep state to the
+ * state associated with given @pm_state, if supported, and
+ * execute the _PTS control method. This function is used if the
+ * pre-ACPI 2.0 suspend ordering has been requested.
+ */
+static int acpi_suspend_begin_old(suspend_state_t pm_state)
+{
+ int error = acpi_suspend_begin(pm_state);
+
+ if (!error)
+ error = __acpi_pm_prepare();
+ return error;
+}
+
+/*
+ * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
+ * been requested.
+ */
+static struct platform_suspend_ops acpi_suspend_ops_old = {
+ .valid = acpi_suspend_state_valid,
+ .begin = acpi_suspend_begin_old,
+ .prepare = acpi_pm_disable_gpes,
.enter = acpi_suspend_enter,
- .finish = acpi_suspend_finish,
- .end = acpi_suspend_end,
+ .finish = acpi_pm_finish,
+ .end = acpi_pm_end,
+ .recover = acpi_pm_finish,
};
#endif /* CONFIG_SUSPEND */
@@ -229,22 +287,9 @@ static struct platform_suspend_ops acpi_suspend_ops = {
static int acpi_hibernation_begin(void)
{
acpi_target_sleep_state = ACPI_STATE_S4;
-
return 0;
}
-static int acpi_hibernation_prepare(void)
-{
- int error = acpi_sleep_prepare(ACPI_STATE_S4);
-
- if (error) {
- acpi_target_sleep_state = ACPI_STATE_S0;
- return error;
- }
-
- return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
-}
-
static int acpi_hibernation_enter(void)
{
acpi_status status = AE_OK;
@@ -274,52 +319,55 @@ static void acpi_hibernation_leave(void)
acpi_leave_sleep_state_prep(ACPI_STATE_S4);
}
-static void acpi_hibernation_finish(void)
+static void acpi_pm_enable_gpes(void)
{
- acpi_disable_wakeup_device(ACPI_STATE_S4);
- acpi_leave_sleep_state(ACPI_STATE_S4);
-
- /* reset firmware waking vector */
- acpi_set_firmware_waking_vector((acpi_physical_address) 0);
-
- acpi_target_sleep_state = ACPI_STATE_S0;
+ acpi_hw_enable_all_runtime_gpes();
}
-static void acpi_hibernation_end(void)
-{
- /*
- * This is necessary in case acpi_hibernation_finish() is not called
- * during a failing transition to the sleep state.
- */
- acpi_target_sleep_state = ACPI_STATE_S0;
-}
+static struct platform_hibernation_ops acpi_hibernation_ops = {
+ .begin = acpi_hibernation_begin,
+ .end = acpi_pm_end,
+ .pre_snapshot = acpi_pm_prepare,
+ .finish = acpi_pm_finish,
+ .prepare = acpi_pm_prepare,
+ .enter = acpi_hibernation_enter,
+ .leave = acpi_hibernation_leave,
+ .pre_restore = acpi_pm_disable_gpes,
+ .restore_cleanup = acpi_pm_enable_gpes,
+};
-static int acpi_hibernation_pre_restore(void)
+/**
+ * acpi_hibernation_begin_old - Set the target system sleep state to
+ * ACPI_STATE_S4 and execute the _PTS control method. This
+ * function is used if the pre-ACPI 2.0 suspend ordering has been
+ * requested.
+ */
+static int acpi_hibernation_begin_old(void)
{
- acpi_status status;
-
- status = acpi_hw_disable_all_gpes();
-
- return ACPI_SUCCESS(status) ? 0 : -EFAULT;
-}
+ int error = acpi_sleep_prepare(ACPI_STATE_S4);
-static void acpi_hibernation_restore_cleanup(void)
-{
- acpi_hw_enable_all_runtime_gpes();
+ if (!error)
+ acpi_target_sleep_state = ACPI_STATE_S4;
+ return error;
}
-static struct platform_hibernation_ops acpi_hibernation_ops = {
- .begin = acpi_hibernation_begin,
- .end = acpi_hibernation_end,
- .pre_snapshot = acpi_hibernation_prepare,
- .finish = acpi_hibernation_finish,
- .prepare = acpi_hibernation_prepare,
+/*
+ * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
+ * been requested.
+ */
+static struct platform_hibernation_ops acpi_hibernation_ops_old = {
+ .begin = acpi_hibernation_begin_old,
+ .end = acpi_pm_end,
+ .pre_snapshot = acpi_pm_disable_gpes,
+ .finish = acpi_pm_finish,
+ .prepare = acpi_pm_disable_gpes,
.enter = acpi_hibernation_enter,
.leave = acpi_hibernation_leave,
- .pre_restore = acpi_hibernation_pre_restore,
- .restore_cleanup = acpi_hibernation_restore_cleanup,
+ .pre_restore = acpi_pm_disable_gpes,
+ .restore_cleanup = acpi_pm_enable_gpes,
+ .recover = acpi_pm_finish,
};
-#endif /* CONFIG_HIBERNATION */
+#endif /* CONFIG_HIBERNATION */
int acpi_suspend(u32 acpi_state)
{
@@ -461,13 +509,15 @@ int __init acpi_sleep_init(void)
}
}
- suspend_set_ops(&acpi_suspend_ops);
+ suspend_set_ops(old_suspend_ordering ?
+ &acpi_suspend_ops_old : &acpi_suspend_ops);
#endif
#ifdef CONFIG_HIBERNATION
status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
if (ACPI_SUCCESS(status)) {
- hibernation_set_ops(&acpi_hibernation_ops);
+ hibernation_set_ops(old_suspend_ordering ?
+ &acpi_hibernation_ops_old : &acpi_hibernation_ops);
sleep_states[ACPI_STATE_S4] = 1;
printk(" S4");
}
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index d571204aaff7..3250c5257b74 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -781,8 +781,6 @@ int device_suspend(pm_message_t state)
error = dpm_prepare(state);
if (!error)
error = dpm_suspend(state);
- if (error)
- device_resume(resume_event(state));
return error;
}
EXPORT_SYMBOL_GPL(device_suspend);
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 41f7ce7edd7a..33adcf91ef41 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -234,6 +234,9 @@ int acpi_check_region(resource_size_t start, resource_size_t n,
int acpi_check_mem_region(resource_size_t start, resource_size_t n,
const char *name);
+#ifdef CONFIG_PM_SLEEP
+void __init acpi_old_suspend_ordering(void);
+#endif /* CONFIG_PM_SLEEP */
#else /* CONFIG_ACPI */
static inline int early_acpi_boot_init(void)
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index a6977423baf7..e8e69159af71 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -86,6 +86,11 @@ typedef int __bitwise suspend_state_t;
* that implement @begin(), but platforms implementing @begin() should
* also provide a @end() which cleans up transitions aborted before
* @enter().
+ *
+ * @recover: Recover the platform from a suspend failure.
+ * Called by the PM core if the suspending of devices fails.
+ * This callback is optional and should only be implemented by platforms
+ * which require special recovery actions in that situation.
*/
struct platform_suspend_ops {
int (*valid)(suspend_state_t state);
@@ -94,6 +99,7 @@ struct platform_suspend_ops {
int (*enter)(suspend_state_t state);
void (*finish)(void);
void (*end)(void);
+ void (*recover)(void);
};
#ifdef CONFIG_SUSPEND
@@ -149,7 +155,7 @@ extern void mark_free_pages(struct zone *zone);
* The methods in this structure allow a platform to carry out special
* operations required by it during a hibernation transition.
*
- * All the methods below must be implemented.
+ * All the methods below, except for @recover(), must be implemented.
*
* @begin: Tell the platform driver that we're starting hibernation.
* Called right after shrinking memory and before freezing devices.
@@ -189,6 +195,11 @@ extern void mark_free_pages(struct zone *zone);
* @restore_cleanup: Clean up after a failing image restoration.
* Called right after the nonboot CPUs have been enabled and before
* thawing devices (runs with IRQs on).
+ *
+ * @recover: Recover the platform from a failure to suspend devices.
+ * Called by the PM core if the suspending of devices during hibernation
+ * fails. This callback is optional and should only be implemented by
+ * platforms which require special recovery actions in that situation.
*/
struct platform_hibernation_ops {
int (*begin)(void);
@@ -200,6 +211,7 @@ struct platform_hibernation_ops {
void (*leave)(void);
int (*pre_restore)(void);
void (*restore_cleanup)(void);
+ void (*recover)(void);
};
#ifdef CONFIG_HIBERNATION
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index d416be0efa8a..f011e0870b52 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -180,6 +180,17 @@ static void platform_restore_cleanup(int platform_mode)
}
/**
+ * platform_recover - recover the platform from a failure to suspend
+ * devices.
+ */
+
+static void platform_recover(int platform_mode)
+{
+ if (platform_mode && hibernation_ops && hibernation_ops->recover)
+ hibernation_ops->recover();
+}
+
+/**
* create_image - freeze devices that need to be frozen with interrupts
* off, create the hibernation image and thaw those devices. Control
* reappears in this routine after a restore.
@@ -258,10 +269,10 @@ int hibernation_snapshot(int platform_mode)
suspend_console();
error = device_suspend(PMSG_FREEZE);
if (error)
- goto Resume_console;
+ goto Recover_platform;
if (hibernation_test(TEST_DEVICES))
- goto Resume_devices;
+ goto Recover_platform;
error = platform_pre_snapshot(platform_mode);
if (error || hibernation_test(TEST_PLATFORM))
@@ -285,11 +296,14 @@ int hibernation_snapshot(int platform_mode)
Resume_devices:
device_resume(in_suspend ?
(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
- Resume_console:
resume_console();
Close:
platform_end(platform_mode);
return error;
+
+ Recover_platform:
+ platform_recover(platform_mode);
+ goto Resume_devices;
}
/**
@@ -398,8 +412,11 @@ int hibernation_platform_enter(void)
suspend_console();
error = device_suspend(PMSG_HIBERNATE);
- if (error)
- goto Resume_console;
+ if (error) {
+ if (hibernation_ops->recover)
+ hibernation_ops->recover();
+ goto Resume_devices;
+ }
error = hibernation_ops->prepare();
if (error)
@@ -428,7 +445,6 @@ int hibernation_platform_enter(void)
hibernation_ops->finish();
Resume_devices:
device_resume(PMSG_RESTORE);
- Resume_console:
resume_console();
Close:
hibernation_ops->end();
diff --git a/kernel/power/main.c b/kernel/power/main.c
index d023b6b584e5..3398f4651aa1 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -269,11 +269,11 @@ int suspend_devices_and_enter(suspend_state_t state)
error = device_suspend(PMSG_SUSPEND);
if (error) {
printk(KERN_ERR "PM: Some devices failed to suspend\n");
- goto Resume_console;
+ goto Recover_platform;
}
if (suspend_test(TEST_DEVICES))
- goto Resume_devices;
+ goto Recover_platform;
if (suspend_ops->prepare) {
error = suspend_ops->prepare();
@@ -294,12 +294,16 @@ int suspend_devices_and_enter(suspend_state_t state)
suspend_ops->finish();
Resume_devices:
device_resume(PMSG_RESUME);
- Resume_console:
resume_console();
Close:
if (suspend_ops->end)
suspend_ops->end();
return error;
+
+ Recover_platform:
+ if (suspend_ops->recover)
+ suspend_ops->recover();
+ goto Resume_devices;
}
/**