diff options
| -rw-r--r-- | drivers/mtd/devices/m25p80.c | 39 |
1 files changed, 32 insertions, 7 deletions
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index d2232e7568d3..2db1ee4b7509 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -48,6 +48,12 @@ #define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */ #define OPCODE_RDID 0x9f /* Read JEDEC ID */ +/* 4-byte address opcodes - used on Spansion and some Macronix flashes. */ +#define OPCODE_NORM_READ_4B 0x13 /* Read data bytes (low frequency) */ +#define OPCODE_FAST_READ_4B 0x0c /* Read data bytes (high frequency) */ +#define OPCODE_PP_4B 0x12 /* Page program (up to 256 bytes) */ +#define OPCODE_SE_4B 0xdc /* Sector erase (usually 64KiB) */ + /* Used for SST flashes only. */ #define OPCODE_BP 0x02 /* Byte program */ #define OPCODE_WRDI 0x04 /* Write disable */ @@ -84,6 +90,8 @@ struct m25p { u16 page_size; u16 addr_width; u8 erase_opcode; + u8 read_opcode; + u8 program_opcode; u8 *command; bool fast_read; }; @@ -371,7 +379,7 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len, */ /* Set up the write data buffer. */ - opcode = flash->fast_read ? OPCODE_FAST_READ : OPCODE_NORM_READ; + opcode = flash->read_opcode; flash->command[0] = opcode; m25p_addr2cmd(flash, from, flash->command); @@ -422,7 +430,7 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len, write_enable(flash); /* Set up the opcode in the write buffer. */ - flash->command[0] = OPCODE_PP; + flash->command[0] = flash->program_opcode; m25p_addr2cmd(flash, to, flash->command); page_offset = to & (flash->page_size - 1); @@ -1037,15 +1045,32 @@ static int m25p_probe(struct spi_device *spi) flash->fast_read = true; #endif + /* Default commands */ + if (flash->fast_read) + flash->read_opcode = OPCODE_FAST_READ; + else + flash->read_opcode = OPCODE_NORM_READ; + + flash->program_opcode = OPCODE_PP; + if (info->addr_width) flash->addr_width = info->addr_width; - else { + else if (flash->mtd.size > 0x1000000) { /* enable 4-byte addressing if the device exceeds 16MiB */ - if (flash->mtd.size > 0x1000000) { - flash->addr_width = 4; - set_4byte(flash, info->jedec_id, 1); + flash->addr_width = 4; + if (JEDEC_MFR(info->jedec_id) == CFI_MFR_AMD) { + /* Dedicated 4-byte command set */ + flash->read_opcode = flash->fast_read ? + OPCODE_FAST_READ_4B : + OPCODE_NORM_READ_4B; + flash->program_opcode = OPCODE_PP_4B; + /* No small sector erase for 4-byte command set */ + flash->erase_opcode = OPCODE_SE_4B; + flash->mtd.erasesize = info->sector_size; } else - flash->addr_width = 3; + set_4byte(flash, info->jedec_id, 1); + } else { + flash->addr_width = 3; } dev_info(&spi->dev, "%s (%lld Kbytes)\n", id->name, |