summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/i2c/busses/i2c-cpm.c7
-rw-r--r--drivers/i2c/busses/i2c-pxa.c7
-rw-r--r--drivers/i2c/busses/i2c-s6000.c5
-rw-r--r--drivers/i2c/i2c-core.c5
4 files changed, 10 insertions, 14 deletions
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 3a20961bef1e..b1d9cd28d8da 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -662,11 +662,8 @@ static int __devinit cpm_i2c_probe(struct platform_device *ofdev)
/* register new adapter to i2c module... */
data = of_get_property(ofdev->dev.of_node, "linux,i2c-index", &len);
- if (data && len == 4) {
- cpm->adap.nr = *data;
- result = i2c_add_numbered_adapter(&cpm->adap);
- } else
- result = i2c_add_adapter(&cpm->adap);
+ cpm->adap.nr = (data && len == 4) ? be32_to_cpup(data) : -1;
+ result = i2c_add_numbered_adapter(&cpm->adap);
if (result < 0) {
dev_err(&ofdev->dev, "Unable to register with I2C\n");
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index f59224a5c761..d60364650990 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -1079,7 +1079,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
* The reason to do so is to avoid sysfs names that only make
* sense when there are multiple adapters.
*/
- i2c->adap.nr = dev->id != -1 ? dev->id : 0;
+ i2c->adap.nr = dev->id;
snprintf(i2c->adap.name, sizeof(i2c->adap.name), "pxa_i2c-i2c.%u",
i2c->adap.nr);
@@ -1142,10 +1142,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
i2c->adap.dev.of_node = dev->dev.of_node;
#endif
- if (i2c_type == REGS_CE4100)
- ret = i2c_add_adapter(&i2c->adap);
- else
- ret = i2c_add_numbered_adapter(&i2c->adap);
+ ret = i2c_add_numbered_adapter(&i2c->adap);
if (ret < 0) {
printk(KERN_INFO "I2C: Failed to add bus\n");
goto eadapt;
diff --git a/drivers/i2c/busses/i2c-s6000.c b/drivers/i2c/busses/i2c-s6000.c
index cb5d01e279c6..c64ba736f480 100644
--- a/drivers/i2c/busses/i2c-s6000.c
+++ b/drivers/i2c/busses/i2c-s6000.c
@@ -341,10 +341,7 @@ static int __devinit s6i2c_probe(struct platform_device *dev)
i2c_wr16(iface, S6_I2C_TXTL, 0);
platform_set_drvdata(dev, iface);
- if (bus_num < 0)
- rc = i2c_add_adapter(p_adap);
- else
- rc = i2c_add_numbered_adapter(p_adap);
+ rc = i2c_add_numbered_adapter(p_adap);
if (rc)
goto err_irq_free;
return 0;
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 9a58994ff7ea..131079a3e292 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -925,6 +925,9 @@ EXPORT_SYMBOL(i2c_add_adapter);
* or otherwise built in to the system's mainboard, and where i2c_board_info
* is used to properly configure I2C devices.
*
+ * If the requested bus number is set to -1, then this function will behave
+ * identically to i2c_add_adapter, and will dynamically assign a bus number.
+ *
* If no devices have pre-been declared for this bus, then be sure to
* register the adapter before any dynamically allocated ones. Otherwise
* the required bus ID may not be available.
@@ -940,6 +943,8 @@ int i2c_add_numbered_adapter(struct i2c_adapter *adap)
int id;
int status;
+ if (adap->nr == -1) /* -1 means dynamically assign bus id */
+ return i2c_add_adapter(adap);
if (adap->nr & ~MAX_ID_MASK)
return -EINVAL;