summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/arm/Kconfig1
-rw-r--r--arch/arm/mach-s3c64xx/dev-uart.c60
-rw-r--r--arch/arm/mach-s3c64xx/include/mach/irqs.h30
-rw-r--r--arch/arm/mach-s3c64xx/irq.c25
-rw-r--r--arch/arm/plat-s5p/Kconfig1
-rw-r--r--arch/arm/plat-s5p/dev-uart.c84
-rw-r--r--arch/arm/plat-s5p/include/plat/irqs.h35
-rw-r--r--arch/arm/plat-s5p/irq.c34
-rw-r--r--arch/arm/plat-samsung/Kconfig5
-rw-r--r--arch/arm/plat-samsung/Makefile1
-rw-r--r--arch/arm/plat-samsung/include/plat/regs-serial.h5
-rw-r--r--arch/arm/plat-samsung/irq-uart.c96
12 files changed, 25 insertions, 352 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5ebc5d922ea1..325d2f55744d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -722,7 +722,6 @@ config ARCH_S3C64XX
select ARCH_REQUIRE_GPIOLIB
select SAMSUNG_CLKSRC
select SAMSUNG_IRQ_VIC_TIMER
- select SAMSUNG_IRQ_UART
select S3C_GPIO_TRACK
select S3C_GPIO_PULL_UPDOWN
select S3C_GPIO_CFG_S3C24XX
diff --git a/arch/arm/mach-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c
index f797f748b999..c681b99eda08 100644
--- a/arch/arm/mach-s3c64xx/dev-uart.c
+++ b/arch/arm/mach-s3c64xx/dev-uart.c
@@ -37,21 +37,10 @@ static struct resource s3c64xx_uart0_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S3CUART_RX0,
- .end = IRQ_S3CUART_RX0,
+ .start = IRQ_UART0,
+ .end = IRQ_UART0,
.flags = IORESOURCE_IRQ,
},
- [2] = {
- .start = IRQ_S3CUART_TX0,
- .end = IRQ_S3CUART_TX0,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR0,
- .end = IRQ_S3CUART_ERR0,
- .flags = IORESOURCE_IRQ,
- }
};
static struct resource s3c64xx_uart1_resource[] = {
@@ -61,19 +50,8 @@ static struct resource s3c64xx_uart1_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S3CUART_RX1,
- .end = IRQ_S3CUART_RX1,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S3CUART_TX1,
- .end = IRQ_S3CUART_TX1,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR1,
- .end = IRQ_S3CUART_ERR1,
+ .start = IRQ_UART1,
+ .end = IRQ_UART1,
.flags = IORESOURCE_IRQ,
},
};
@@ -85,19 +63,8 @@ static struct resource s3c6xx_uart2_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S3CUART_RX2,
- .end = IRQ_S3CUART_RX2,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S3CUART_TX2,
- .end = IRQ_S3CUART_TX2,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR2,
- .end = IRQ_S3CUART_ERR2,
+ .start = IRQ_UART2,
+ .end = IRQ_UART2,
.flags = IORESOURCE_IRQ,
},
};
@@ -109,19 +76,8 @@ static struct resource s3c64xx_uart3_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S3CUART_RX3,
- .end = IRQ_S3CUART_RX3,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S3CUART_TX3,
- .end = IRQ_S3CUART_TX3,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR3,
- .end = IRQ_S3CUART_ERR3,
+ .start = IRQ_UART3,
+ .end = IRQ_UART3,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
index c026f67a80de..443f85b3c203 100644
--- a/arch/arm/mach-s3c64xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -27,36 +27,6 @@
#define IRQ_VIC0_BASE S3C_IRQ(0)
#define IRQ_VIC1_BASE S3C_IRQ(32)
-/* UART interrupts, each UART has 4 intterupts per channel so
- * use the space between the ISA and S3C main interrupts. Note, these
- * are not in the same order as the S3C24XX series! */
-
-#define IRQ_S3CUART_BASE0 (16)
-#define IRQ_S3CUART_BASE1 (20)
-#define IRQ_S3CUART_BASE2 (24)
-#define IRQ_S3CUART_BASE3 (28)
-
-#define UART_IRQ_RXD (0)
-#define UART_IRQ_ERR (1)
-#define UART_IRQ_TXD (2)
-#define UART_IRQ_MODEM (3)
-
-#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
-
/* VIC based IRQs */
#define S3C64XX_IRQ_VIC0(x) (IRQ_VIC0_BASE + (x))
diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c
index 75d9a0e49193..b07357e94958 100644
--- a/arch/arm/mach-s3c64xx/irq.c
+++ b/arch/arm/mach-s3c64xx/irq.c
@@ -25,29 +25,6 @@
#include <plat/irq-uart.h>
#include <plat/cpu.h>
-static struct s3c_uart_irq uart_irqs[] = {
- [0] = {
- .regs = S3C_VA_UART0,
- .base_irq = IRQ_S3CUART_BASE0,
- .parent_irq = IRQ_UART0,
- },
- [1] = {
- .regs = S3C_VA_UART1,
- .base_irq = IRQ_S3CUART_BASE1,
- .parent_irq = IRQ_UART1,
- },
- [2] = {
- .regs = S3C_VA_UART2,
- .base_irq = IRQ_S3CUART_BASE2,
- .parent_irq = IRQ_UART2,
- },
- [3] = {
- .regs = S3C_VA_UART3,
- .base_irq = IRQ_S3CUART_BASE3,
- .parent_irq = IRQ_UART3,
- },
-};
-
/* setup the sources the vic should advertise resume for, even though it
* is not doing the wake (set_irq_wake needs to be valid) */
#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
@@ -67,6 +44,4 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
/* add the timer sub-irqs */
s3c_init_vic_timer_irq(5, IRQ_TIMER0);
-
- s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
}
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 9843c954c042..9a197e55f669 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -22,7 +22,6 @@ config PLAT_S5P
select PLAT_SAMSUNG
select SAMSUNG_CLKSRC
select SAMSUNG_IRQ_VIC_TIMER
- select SAMSUNG_IRQ_UART
help
Base platform code for Samsung's S5P series SoC.
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
index afaf87fdb93e..c9308db36183 100644
--- a/arch/arm/plat-s5p/dev-uart.c
+++ b/arch/arm/plat-s5p/dev-uart.c
@@ -32,20 +32,10 @@ static struct resource s5p_uart0_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S5P_UART_RX0,
- .end = IRQ_S5P_UART_RX0,
+ .start = IRQ_UART0,
+ .end = IRQ_UART0,
.flags = IORESOURCE_IRQ,
},
- [2] = {
- .start = IRQ_S5P_UART_TX0,
- .end = IRQ_S5P_UART_TX0,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = IRQ_S5P_UART_ERR0,
- .end = IRQ_S5P_UART_ERR0,
- .flags = IORESOURCE_IRQ,
- }
};
static struct resource s5p_uart1_resource[] = {
@@ -55,18 +45,8 @@ static struct resource s5p_uart1_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S5P_UART_RX1,
- .end = IRQ_S5P_UART_RX1,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S5P_UART_TX1,
- .end = IRQ_S5P_UART_TX1,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = IRQ_S5P_UART_ERR1,
- .end = IRQ_S5P_UART_ERR1,
+ .start = IRQ_UART1,
+ .end = IRQ_UART1,
.flags = IORESOURCE_IRQ,
},
};
@@ -78,18 +58,8 @@ static struct resource s5p_uart2_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S5P_UART_RX2,
- .end = IRQ_S5P_UART_RX2,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S5P_UART_TX2,
- .end = IRQ_S5P_UART_TX2,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = IRQ_S5P_UART_ERR2,
- .end = IRQ_S5P_UART_ERR2,
+ .start = IRQ_UART2,
+ .end = IRQ_UART2,
.flags = IORESOURCE_IRQ,
},
};
@@ -102,18 +72,8 @@ static struct resource s5p_uart3_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S5P_UART_RX3,
- .end = IRQ_S5P_UART_RX3,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S5P_UART_TX3,
- .end = IRQ_S5P_UART_TX3,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = IRQ_S5P_UART_ERR3,
- .end = IRQ_S5P_UART_ERR3,
+ .start = IRQ_UART3,
+ .end = IRQ_UART3,
.flags = IORESOURCE_IRQ,
},
#endif
@@ -127,18 +87,8 @@ static struct resource s5p_uart4_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S5P_UART_RX4,
- .end = IRQ_S5P_UART_RX4,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S5P_UART_TX4,
- .end = IRQ_S5P_UART_TX4,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = IRQ_S5P_UART_ERR4,
- .end = IRQ_S5P_UART_ERR4,
+ .start = IRQ_UART4,
+ .end = IRQ_UART4,
.flags = IORESOURCE_IRQ,
},
#endif
@@ -152,18 +102,8 @@ static struct resource s5p_uart5_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S5P_UART_RX5,
- .end = IRQ_S5P_UART_RX5,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S5P_UART_TX5,
- .end = IRQ_S5P_UART_TX5,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = IRQ_S5P_UART_ERR5,
- .end = IRQ_S5P_UART_ERR5,
+ .start = IRQ_UART5,
+ .end = IRQ_UART5,
.flags = IORESOURCE_IRQ,
},
#endif
diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h
index ba9121c60a2a..144dbfc6506d 100644
--- a/arch/arm/plat-s5p/include/plat/irqs.h
+++ b/arch/arm/plat-s5p/include/plat/irqs.h
@@ -37,41 +37,6 @@
#define IRQ_VIC1_BASE S5P_VIC1_BASE
#define IRQ_VIC2_BASE S5P_VIC2_BASE
-/* UART interrupts, each UART has 4 intterupts per channel so
- * use the space between the ISA and S3C main interrupts. Note, these
- * are not in the same order as the S3C24XX series! */
-
-#define IRQ_S5P_UART_BASE0 (16)
-#define IRQ_S5P_UART_BASE1 (20)
-#define IRQ_S5P_UART_BASE2 (24)
-#define IRQ_S5P_UART_BASE3 (28)
-
-#define UART_IRQ_RXD (0)
-#define UART_IRQ_ERR (1)
-#define UART_IRQ_TXD (2)
-
-#define IRQ_S5P_UART_RX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR0 (IRQ_S5P_UART_BASE0 + UART_IRQ_ERR)
-
-#define IRQ_S5P_UART_RX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR1 (IRQ_S5P_UART_BASE1 + UART_IRQ_ERR)
-
-#define IRQ_S5P_UART_RX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR2 (IRQ_S5P_UART_BASE2 + UART_IRQ_ERR)
-
-#define IRQ_S5P_UART_RX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR3 (IRQ_S5P_UART_BASE3 + UART_IRQ_ERR)
-
-/* S3C compatibilty defines */
-#define IRQ_S3CUART_RX0 IRQ_S5P_UART_RX0
-#define IRQ_S3CUART_RX1 IRQ_S5P_UART_RX1
-#define IRQ_S3CUART_RX2 IRQ_S5P_UART_RX2
-#define IRQ_S3CUART_RX3 IRQ_S5P_UART_RX3
-
/* VIC based IRQs */
#define S5P_IRQ_VIC0(x) (S5P_VIC0_BASE + (x))
diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-s5p/irq.c
index a97c08957f49..afdaa1082b9f 100644
--- a/arch/arm/plat-s5p/irq.c
+++ b/arch/arm/plat-s5p/irq.c
@@ -17,42 +17,10 @@
#include <asm/hardware/vic.h>
-#include <linux/serial_core.h>
#include <mach/map.h>
#include <plat/regs-timer.h>
-#include <plat/regs-serial.h>
#include <plat/cpu.h>
#include <plat/irq-vic-timer.h>
-#include <plat/irq-uart.h>
-
-/*
- * Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
- * are consecutive when looking up the interrupt in the demux routines.
- */
-static struct s3c_uart_irq uart_irqs[] = {
- [0] = {
- .regs = S5P_VA_UART0,
- .base_irq = IRQ_S5P_UART_BASE0,
- .parent_irq = IRQ_UART0,
- },
- [1] = {
- .regs = S5P_VA_UART1,
- .base_irq = IRQ_S5P_UART_BASE1,
- .parent_irq = IRQ_UART1,
- },
- [2] = {
- .regs = S5P_VA_UART2,
- .base_irq = IRQ_S5P_UART_BASE2,
- .parent_irq = IRQ_UART2,
- },
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
- [3] = {
- .regs = S5P_VA_UART3,
- .base_irq = IRQ_S5P_UART_BASE3,
- .parent_irq = IRQ_UART3,
- },
-#endif
-};
void __init s5p_init_irq(u32 *vic, u32 num_vic)
{
@@ -65,6 +33,4 @@ void __init s5p_init_irq(u32 *vic, u32 num_vic)
#endif
s3c_init_vic_timer_irq(5, IRQ_TIMER0);
-
- s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
}
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index b3e10659e4b8..dffa37bc4a0b 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -65,11 +65,6 @@ config SAMSUNG_IRQ_VIC_TIMER
help
Internal configuration to build the VIC timer interrupt code.
-config SAMSUNG_IRQ_UART
- bool
- help
- Internal configuration to build the IRQ UART demux code.
-
# options for gpio configuration support
config SAMSUNG_GPIOLIB_4BIT
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 853764ba8cc5..1105922342fe 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -21,7 +21,6 @@ obj-y += dev-asocdma.o
obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o
-obj-$(CONFIG_SAMSUNG_IRQ_UART) += irq-uart.o
obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
# ADC
diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
index bac36fa3becb..720734847027 100644
--- a/arch/arm/plat-samsung/include/plat/regs-serial.h
+++ b/arch/arm/plat-samsung/include/plat/regs-serial.h
@@ -186,6 +186,11 @@
#define S3C64XX_UINTSP 0x34
#define S3C64XX_UINTM 0x38
+#define S3C64XX_UINTM_RXD (0)
+#define S3C64XX_UINTM_TXD (2)
+#define S3C64XX_UINTM_RXD_MSK (1 << S3C64XX_UINTM_RXD)
+#define S3C64XX_UINTM_TXD_MSK (1 << S3C64XX_UINTM_TXD)
+
/* Following are specific to S5PV210 */
#define S5PV210_UCON_CLKMASK (1<<10)
#define S5PV210_UCON_PCLK (0<<10)
diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c
deleted file mode 100644
index 3014c7226bd1..000000000000
--- a/arch/arm/plat-samsung/irq-uart.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/* arch/arm/plat-samsung/irq-uart.c
- * originally part of arch/arm/plat-s3c64xx/irq.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * Samsung- UART Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/serial_core.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/map.h>
-#include <plat/irq-uart.h>
-#include <plat/regs-serial.h>
-#include <plat/cpu.h>
-
-/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
- * are consecutive when looking up the interrupt in the demux routines.
- */
-static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
-{
- struct s3c_uart_irq *uirq = desc->irq_data.handler_data;
- struct irq_chip *chip = irq_get_chip(irq);
- u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
- int base = uirq->base_irq;
-
- chained_irq_enter(chip, desc);
-
- if (pend & (1 << 0))
- generic_handle_irq(base);
- if (pend & (1 << 1))
- generic_handle_irq(base + 1);
- if (pend & (1 << 2))
- generic_handle_irq(base + 2);
- if (pend & (1 << 3))
- generic_handle_irq(base + 3);
-
- chained_irq_exit(chip, desc);
-}
-
-static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq)
-{
- void __iomem *reg_base = uirq->regs;
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
-
- /* mask all interrupts at the start. */
- __raw_writel(0xf, reg_base + S3C64XX_UINTM);
-
- gc = irq_alloc_generic_chip("s3c-uart", 1, uirq->base_irq, reg_base,
- handle_level_irq);
-
- if (!gc) {
- pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n",
- __func__, uirq->base_irq);
- return;
- }
-
- ct = gc->chip_types;
- ct->chip.irq_ack = irq_gc_ack_set_bit;
- ct->chip.irq_mask = irq_gc_mask_set_bit;
- ct->chip.irq_unmask = irq_gc_mask_clr_bit;
- ct->regs.ack = S3C64XX_UINTP;
- ct->regs.mask = S3C64XX_UINTM;
- irq_setup_generic_chip(gc, IRQ_MSK(4), IRQ_GC_INIT_MASK_CACHE,
- IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-
- irq_set_handler_data(uirq->parent_irq, uirq);
- irq_set_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
-}
-
-/**
- * s3c_init_uart_irqs() - initialise UART IRQs and the necessary demuxing
- * @irq: The interrupt data for registering
- * @nr_irqs: The number of interrupt descriptions in @irq.
- *
- * Register the UART interrupts specified by @irq including the demuxing
- * routines. This supports the S3C6400 and newer style of devices.
- */
-void __init s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs)
-{
- for (; nr_irqs > 0; nr_irqs--, irq++)
- s3c_init_uart_irq(irq);
-}