summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/filesystems/spufs.txt521
-rw-r--r--Documentation/powerpc/00-INDEX10
-rw-r--r--arch/powerpc/Kconfig30
-rw-r--r--arch/powerpc/Makefile2
-rw-r--r--arch/powerpc/boot/Makefile30
-rw-r--r--arch/powerpc/configs/pmac32_defconfig1729
-rw-r--r--arch/powerpc/kernel/Makefile22
-rw-r--r--arch/powerpc/kernel/asm-offsets.c6
-rw-r--r--arch/powerpc/kernel/btext.c136
-rw-r--r--arch/powerpc/kernel/cputable.c106
-rw-r--r--arch/powerpc/kernel/crash.c264
-rw-r--r--arch/powerpc/kernel/crash_dump.c109
-rw-r--r--arch/powerpc/kernel/dma_64.c9
-rw-r--r--arch/powerpc/kernel/entry_32.S167
-rw-r--r--arch/powerpc/kernel/entry_64.S218
-rw-r--r--arch/powerpc/kernel/head_32.S56
-rw-r--r--arch/powerpc/kernel/head_64.S41
-rw-r--r--arch/powerpc/kernel/ibmebus.c396
-rw-r--r--arch/powerpc/kernel/irq.c81
-rw-r--r--arch/powerpc/kernel/legacy_serial.c557
-rw-r--r--arch/powerpc/kernel/lparmap.c12
-rw-r--r--arch/powerpc/kernel/machine_kexec.c67
-rw-r--r--arch/powerpc/kernel/machine_kexec_32.c65
-rw-r--r--arch/powerpc/kernel/machine_kexec_64.c43
-rw-r--r--arch/powerpc/kernel/misc_32.S113
-rw-r--r--arch/powerpc/kernel/nvram_64.c106
-rw-r--r--arch/powerpc/kernel/paca.c11
-rw-r--r--arch/powerpc/kernel/pci_64.c87
-rw-r--r--arch/powerpc/kernel/pmc.c5
-rw-r--r--arch/powerpc/kernel/ppc_ksyms.c5
-rw-r--r--arch/powerpc/kernel/prom.c468
-rw-r--r--arch/powerpc/kernel/prom_init.c60
-rw-r--r--arch/powerpc/kernel/prom_parse.c547
-rw-r--r--arch/powerpc/kernel/rtas_pci.c49
-rw-r--r--arch/powerpc/kernel/setup-common.c129
-rw-r--r--arch/powerpc/kernel/setup_32.c34
-rw-r--r--arch/powerpc/kernel/setup_64.c207
-rw-r--r--arch/powerpc/kernel/signal_32.c68
-rw-r--r--arch/powerpc/kernel/signal_64.c23
-rw-r--r--arch/powerpc/kernel/smp.c29
-rw-r--r--arch/powerpc/kernel/syscalls.c28
-rw-r--r--arch/powerpc/kernel/systbl.S14
-rw-r--r--arch/powerpc/kernel/time.c4
-rw-r--r--arch/powerpc/kernel/traps.c25
-rw-r--r--arch/powerpc/kernel/udbg.c27
-rw-r--r--arch/powerpc/kernel/udbg_16550.c69
-rw-r--r--arch/powerpc/mm/fault.c7
-rw-r--r--arch/powerpc/mm/hash_utils_64.c7
-rw-r--r--arch/powerpc/mm/hugetlbpage.c42
-rw-r--r--arch/powerpc/mm/imalloc.c2
-rw-r--r--arch/powerpc/mm/init_32.c5
-rw-r--r--arch/powerpc/mm/mem.c13
-rw-r--r--arch/powerpc/mm/numa.c139
-rw-r--r--arch/powerpc/mm/slb.c16
-rw-r--r--arch/powerpc/mm/slb_low.S6
-rw-r--r--arch/powerpc/mm/stab.c16
-rw-r--r--arch/powerpc/mm/tlb_64.c2
-rw-r--r--arch/powerpc/oprofile/Makefile1
-rw-r--r--arch/powerpc/oprofile/common.c83
-rw-r--r--arch/powerpc/oprofile/op_model_7450.c206
-rw-r--r--arch/powerpc/oprofile/op_model_power4.c4
-rw-r--r--arch/powerpc/oprofile/op_model_rs64.c3
-rw-r--r--arch/powerpc/platforms/cell/Kconfig13
-rw-r--r--arch/powerpc/platforms/cell/Makefile8
-rw-r--r--arch/powerpc/platforms/cell/interrupt.c42
-rw-r--r--arch/powerpc/platforms/cell/interrupt.h1
-rw-r--r--arch/powerpc/platforms/cell/iommu.c225
-rw-r--r--arch/powerpc/platforms/cell/pervasive.c229
-rw-r--r--arch/powerpc/platforms/cell/pervasive.h62
-rw-r--r--arch/powerpc/platforms/cell/setup.c93
-rw-r--r--arch/powerpc/platforms/cell/spu_base.c711
-rw-r--r--arch/powerpc/platforms/cell/spu_priv1.c133
-rw-r--r--arch/powerpc/platforms/cell/spu_syscalls.c88
-rw-r--r--arch/powerpc/platforms/cell/spufs/Makefile54
-rw-r--r--arch/powerpc/platforms/cell/spufs/backing_ops.c308
-rw-r--r--arch/powerpc/platforms/cell/spufs/context.c167
-rw-r--r--arch/powerpc/platforms/cell/spufs/file.c794
-rw-r--r--arch/powerpc/platforms/cell/spufs/hw_ops.c255
-rw-r--r--arch/powerpc/platforms/cell/spufs/inode.c486
-rw-r--r--arch/powerpc/platforms/cell/spufs/run.c131
-rw-r--r--arch/powerpc/platforms/cell/spufs/sched.c461
-rw-r--r--arch/powerpc/platforms/cell/spufs/spu_restore.c336
-rw-r--r--arch/powerpc/platforms/cell/spufs/spu_restore_crt0.S116
-rw-r--r--arch/powerpc/platforms/cell/spufs/spu_restore_dump.h_shipped231
-rw-r--r--arch/powerpc/platforms/cell/spufs/spu_save.c195
-rw-r--r--arch/powerpc/platforms/cell/spufs/spu_save_crt0.S102
-rw-r--r--arch/powerpc/platforms/cell/spufs/spu_save_dump.h_shipped191
-rw-r--r--arch/powerpc/platforms/cell/spufs/spu_utils.h160
-rw-r--r--arch/powerpc/platforms/cell/spufs/spufs.h163
-rw-r--r--arch/powerpc/platforms/cell/spufs/switch.c2180
-rw-r--r--arch/powerpc/platforms/cell/spufs/syscalls.c101
-rw-r--r--arch/powerpc/platforms/chrp/setup.c16
-rw-r--r--arch/powerpc/platforms/iseries/irq.c337
-rw-r--r--arch/powerpc/platforms/iseries/irq.h1
-rw-r--r--arch/powerpc/platforms/iseries/lpardata.c7
-rw-r--r--arch/powerpc/platforms/iseries/setup.c10
-rw-r--r--arch/powerpc/platforms/maple/setup.c24
-rw-r--r--arch/powerpc/platforms/powermac/Makefile7
-rw-r--r--arch/powerpc/platforms/powermac/bootx_init.c547
-rw-r--r--arch/powerpc/platforms/powermac/cpufreq_64.c496
-rw-r--r--arch/powerpc/platforms/powermac/feature.c367
-rw-r--r--arch/powerpc/platforms/powermac/low_i2c.c1414
-rw-r--r--arch/powerpc/platforms/powermac/nvram.c53
-rw-r--r--arch/powerpc/platforms/powermac/pci.c299
-rw-r--r--arch/powerpc/platforms/powermac/pfunc_base.c405
-rw-r--r--arch/powerpc/platforms/powermac/pfunc_core.c989
-rw-r--r--arch/powerpc/platforms/powermac/pic.c474
-rw-r--r--arch/powerpc/platforms/powermac/pmac.h6
-rw-r--r--arch/powerpc/platforms/powermac/setup.c107
-rw-r--r--arch/powerpc/platforms/powermac/smp.c382
-rw-r--r--arch/powerpc/platforms/powermac/time.c15
-rw-r--r--arch/powerpc/platforms/powermac/udbg_adb.c221
-rw-r--r--arch/powerpc/platforms/powermac/udbg_scc.c (renamed from arch/powerpc/kernel/udbg_scc.c)66
-rw-r--r--arch/powerpc/platforms/pseries/Makefile2
-rw-r--r--arch/powerpc/platforms/pseries/eeh.c26
-rw-r--r--arch/powerpc/platforms/pseries/iommu.c12
-rw-r--r--arch/powerpc/platforms/pseries/lpar.c76
-rw-r--r--arch/powerpc/platforms/pseries/pci_dlpar.c174
-rw-r--r--arch/powerpc/platforms/pseries/ras.c11
-rw-r--r--arch/powerpc/platforms/pseries/ras.h9
-rw-r--r--arch/powerpc/platforms/pseries/setup.c55
-rw-r--r--arch/powerpc/platforms/pseries/xics.c2
-rw-r--r--arch/powerpc/sysdev/Makefile3
-rw-r--r--arch/powerpc/sysdev/dart.h41
-rw-r--r--arch/powerpc/sysdev/dart_iommu.c (renamed from arch/powerpc/sysdev/u3_iommu.c)173
-rw-r--r--arch/powerpc/sysdev/ipic.c (renamed from arch/ppc/syslib/ipic.c)0
-rw-r--r--arch/powerpc/sysdev/ipic.h (renamed from arch/ppc/syslib/ipic.h)0
-rw-r--r--arch/powerpc/sysdev/mpic.c247
-rw-r--r--arch/powerpc/xmon/Makefile8
-rw-r--r--arch/powerpc/xmon/start.c (renamed from arch/powerpc/xmon/start_64.c)0
-rw-r--r--arch/powerpc/xmon/start_32.c441
-rw-r--r--arch/powerpc/xmon/start_8xx.c44
-rw-r--r--arch/powerpc/xmon/xmon.c8
-rw-r--r--arch/ppc/boot/common/util.S6
-rw-r--r--arch/ppc/boot/images/Makefile2
-rw-r--r--arch/ppc/configs/TQM8540_defconfig973
-rw-r--r--arch/ppc/configs/TQM8541_defconfig986
-rw-r--r--arch/ppc/configs/TQM8555_defconfig983
-rw-r--r--arch/ppc/configs/TQM8560_defconfig992
-rw-r--r--arch/ppc/kernel/Makefile1
-rw-r--r--arch/ppc/kernel/asm-offsets.c2
-rw-r--r--arch/ppc/kernel/entry.S167
-rw-r--r--arch/ppc/kernel/misc.S6
-rw-r--r--arch/ppc/kernel/pci.c28
-rw-r--r--arch/ppc/kernel/ppc_ksyms.c5
-rw-r--r--arch/ppc/kernel/setup.c3
-rw-r--r--arch/ppc/platforms/85xx/Kconfig28
-rw-r--r--arch/ppc/platforms/85xx/Makefile4
-rw-r--r--arch/ppc/platforms/85xx/tqm85xx.c419
-rw-r--r--arch/ppc/platforms/85xx/tqm85xx.h56
-rw-r--r--arch/ppc/platforms/chrp_setup.c1
-rw-r--r--arch/ppc/platforms/prep_setup.c2
-rw-r--r--arch/ppc/syslib/Makefile2
-rw-r--r--arch/ppc/syslib/m8xx_setup.c15
-rw-r--r--arch/ppc/syslib/m8xx_wdt.c92
-rw-r--r--arch/ppc/syslib/m8xx_wdt.h4
-rw-r--r--drivers/block/swim3.c38
-rw-r--r--drivers/char/watchdog/mpc8xx_wdt.c20
-rw-r--r--drivers/i2c/busses/Kconfig24
-rw-r--r--drivers/i2c/busses/Makefile3
-rw-r--r--drivers/i2c/busses/i2c-keywest.c751
-rw-r--r--drivers/i2c/busses/i2c-keywest.h108
-rw-r--r--drivers/i2c/busses/i2c-pmac-smu.c315
-rw-r--r--drivers/i2c/busses/i2c-powermac.c290
-rw-r--r--drivers/ide/ppc/pmac.c6
-rw-r--r--drivers/macintosh/Kconfig10
-rw-r--r--drivers/macintosh/macio_asic.c254
-rw-r--r--drivers/macintosh/mediabay.c8
-rw-r--r--drivers/macintosh/smu.c50
-rw-r--r--drivers/macintosh/via-cuda.c52
-rw-r--r--drivers/macintosh/via-pmu.c364
-rw-r--r--drivers/macintosh/windfarm_lm75_sensor.c50
-rw-r--r--drivers/scsi/mac53c94.c22
-rw-r--r--drivers/scsi/mesh.c3
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_core.c2
-rw-r--r--drivers/serial/pmac_zilog.c15
-rw-r--r--drivers/video/controlfb.c114
-rw-r--r--drivers/video/offb.c122
-rw-r--r--drivers/video/platinumfb.c98
-rw-r--r--drivers/video/platinumfb.h4
-rw-r--r--drivers/video/valkyriefb.c12
-rw-r--r--include/asm-powerpc/abs_addr.h2
-rw-r--r--include/asm-powerpc/agp.h2
-rw-r--r--include/asm-powerpc/asm-compat.h3
-rw-r--r--include/asm-powerpc/bootx.h171
-rw-r--r--include/asm-powerpc/btext.h19
-rw-r--r--include/asm-powerpc/bug.h2
-rw-r--r--include/asm-powerpc/checksum.h2
-rw-r--r--include/asm-powerpc/compat.h2
-rw-r--r--include/asm-powerpc/cputable.h36
-rw-r--r--include/asm-powerpc/current.h2
-rw-r--r--include/asm-powerpc/delay.h2
-rw-r--r--include/asm-powerpc/dma-mapping.h2
-rw-r--r--include/asm-powerpc/dma.h2
-rw-r--r--include/asm-powerpc/eeh.h15
-rw-r--r--include/asm-powerpc/eeh_event.h2
-rw-r--r--include/asm-powerpc/elf.h3
-rw-r--r--include/asm-powerpc/firmware.h6
-rw-r--r--include/asm-powerpc/floppy.h2
-rw-r--r--include/asm-powerpc/grackle.h5
-rw-r--r--include/asm-powerpc/hardirq.h2
-rw-r--r--include/asm-powerpc/heathrow.h5
-rw-r--r--include/asm-powerpc/hvcall.h2
-rw-r--r--include/asm-powerpc/hvconsole.h2
-rw-r--r--include/asm-powerpc/hvcserver.h2
-rw-r--r--include/asm-powerpc/i8259.h2
-rw-r--r--include/asm-powerpc/ibmebus.h85
-rw-r--r--include/asm-powerpc/io.h6
-rw-r--r--include/asm-powerpc/iommu.h8
-rw-r--r--include/asm-powerpc/ipic.h (renamed from include/asm-ppc/ipic.h)0
-rw-r--r--include/asm-powerpc/iseries/it_lp_reg_save.h2
-rw-r--r--include/asm-powerpc/kdebug.h2
-rw-r--r--include/asm-powerpc/kdump.h13
-rw-r--r--include/asm-powerpc/kexec.h19
-rw-r--r--include/asm-powerpc/keylargo.h15
-rw-r--r--include/asm-powerpc/kprobes.h2
-rw-r--r--include/asm-powerpc/lmb.h2
-rw-r--r--include/asm-powerpc/lppaca.h2
-rw-r--r--include/asm-powerpc/machdep.h12
-rw-r--r--include/asm-powerpc/macio.h2
-rw-r--r--include/asm-powerpc/mmu.h9
-rw-r--r--include/asm-powerpc/mmu_context.h2
-rw-r--r--include/asm-powerpc/mmzone.h2
-rw-r--r--include/asm-powerpc/module.h2
-rw-r--r--include/asm-powerpc/mpic.h6
-rw-r--r--include/asm-powerpc/numnodes.h2
-rw-r--r--include/asm-powerpc/nvram.h4
-rw-r--r--include/asm-powerpc/of_device.h2
-rw-r--r--include/asm-powerpc/ohare.h6
-rw-r--r--include/asm-powerpc/oprofile_impl.h33
-rw-r--r--include/asm-powerpc/pSeries_reconfig.h2
-rw-r--r--include/asm-powerpc/paca.h21
-rw-r--r--include/asm-powerpc/page.h32
-rw-r--r--include/asm-powerpc/page_32.h2
-rw-r--r--include/asm-powerpc/page_64.h12
-rw-r--r--include/asm-powerpc/param.h2
-rw-r--r--include/asm-powerpc/parport.h2
-rw-r--r--include/asm-powerpc/pci-bridge.h24
-rw-r--r--include/asm-powerpc/pci.h2
-rw-r--r--include/asm-powerpc/pgalloc.h2
-rw-r--r--include/asm-powerpc/pgtable-64k.h6
-rw-r--r--include/asm-powerpc/pgtable.h13
-rw-r--r--include/asm-powerpc/pmac_feature.h25
-rw-r--r--include/asm-powerpc/pmac_low_i2c.h92
-rw-r--r--include/asm-powerpc/pmac_pfunc.h253
-rw-r--r--include/asm-powerpc/pmc.h2
-rw-r--r--include/asm-powerpc/ppc-pci.h2
-rw-r--r--include/asm-powerpc/ppc_asm.h3
-rw-r--r--include/asm-powerpc/processor.h5
-rw-r--r--include/asm-powerpc/prom.h71
-rw-r--r--include/asm-powerpc/ptrace.h2
-rw-r--r--include/asm-powerpc/reg.h58
-rw-r--r--include/asm-powerpc/rtas.h2
-rw-r--r--include/asm-powerpc/seccomp.h4
-rw-r--r--include/asm-powerpc/sections.h2
-rw-r--r--include/asm-powerpc/serial.h2
-rw-r--r--include/asm-powerpc/signal.h7
-rw-r--r--include/asm-powerpc/smu.h34
-rw-r--r--include/asm-powerpc/sparsemem.h10
-rw-r--r--include/asm-powerpc/spinlock.h2
-rw-r--r--include/asm-powerpc/spu.h600
-rw-r--r--include/asm-powerpc/spu_csa.h255
-rw-r--r--include/asm-powerpc/synch.h4
-rw-r--r--include/asm-powerpc/system.h3
-rw-r--r--include/asm-powerpc/tce.h2
-rw-r--r--include/asm-powerpc/thread_info.h12
-rw-r--r--include/asm-powerpc/tlb.h2
-rw-r--r--include/asm-powerpc/topology.h6
-rw-r--r--include/asm-powerpc/udbg.h17
-rw-r--r--include/asm-powerpc/unistd.h4
-rw-r--r--include/asm-powerpc/vdso_datapage.h2
-rw-r--r--include/asm-powerpc/vio.h2
-rw-r--r--include/asm-ppc/bseip.h38
-rw-r--r--include/asm-ppc/btext.h2
-rw-r--r--include/asm-ppc/machdep.h4
-rw-r--r--include/asm-ppc/mpc85xx.h4
-rw-r--r--include/asm-ppc/pci-bridge.h9
-rw-r--r--include/asm-ppc/prom.h32
-rw-r--r--include/linux/pci_regs.h1
-rw-r--r--include/linux/pmu.h8
-rw-r--r--include/linux/syscalls.h5
-rw-r--r--kernel/crash_dump.c3
-rw-r--r--kernel/sys_ni.c2
-rw-r--r--mm/memory.c2
-rw-r--r--sound/oss/dmasound/dmasound_awacs.c81
-rw-r--r--sound/ppc/pmac.c100
-rw-r--r--sound/ppc/pmac.h3
287 files changed, 27018 insertions, 5874 deletions
diff --git a/Documentation/filesystems/spufs.txt b/Documentation/filesystems/spufs.txt
new file mode 100644
index 000000000000..8edc3952eff4
--- /dev/null
+++ b/Documentation/filesystems/spufs.txt
@@ -0,0 +1,521 @@
+SPUFS(2) Linux Programmer's Manual SPUFS(2)
+
+
+
+NAME
+ spufs - the SPU file system
+
+
+DESCRIPTION
+ The SPU file system is used on PowerPC machines that implement the Cell
+ Broadband Engine Architecture in order to access Synergistic Processor
+ Units (SPUs).
+
+ The file system provides a name space similar to posix shared memory or
+ message queues. Users that have write permissions on the file system
+ can use spu_create(2) to establish SPU contexts in the spufs root.
+
+ Every SPU context is represented by a directory containing a predefined
+ set of files. These files can be used for manipulating the state of the
+ logical SPU. Users can change permissions on those files, but not actu-
+ ally add or remove files.
+
+
+MOUNT OPTIONS
+ uid=<uid>
+ set the user owning the mount point, the default is 0 (root).
+
+ gid=<gid>
+ set the group owning the mount point, the default is 0 (root).
+
+
+FILES
+ The files in spufs mostly follow the standard behavior for regular sys-
+ tem calls like read(2) or write(2), but often support only a subset of
+ the operations supported on regular file systems. This list details the
+ supported operations and the deviations from the behaviour in the
+ respective man pages.
+
+ All files that support the read(2) operation also support readv(2) and
+ all files that support the write(2) operation also support writev(2).
+ All files support the access(2) and stat(2) family of operations, but
+ only the st_mode, st_nlink, st_uid and st_gid fields of struct stat
+ contain reliable information.
+
+ All files support the chmod(2)/fchmod(2) and chown(2)/fchown(2) opera-
+ tions, but will not be able to grant permissions that contradict the
+ possible operations, e.g. read access on the wbox file.
+
+ The current set of files is:
+
+
+ /mem
+ the contents of the local storage memory of the SPU. This can be
+ accessed like a regular shared memory file and contains both code and
+ data in the address space of the SPU. The possible operations on an
+ open mem file are:
+
+ read(2), pread(2), write(2), pwrite(2), lseek(2)
+ These operate as documented, with the exception that seek(2),
+ write(2) and pwrite(2) are not supported beyond the end of the
+ file. The file size is the size of the local storage of the SPU,
+ which normally is 256 kilobytes.
+
+ mmap(2)
+ Mapping mem into the process address space gives access to the
+ SPU local storage within the process address space. Only
+ MAP_SHARED mappings are allowed.
+
+
+ /mbox
+ The first SPU to CPU communication mailbox. This file is read-only and
+ can be read in units of 32 bits. The file can only be used in non-
+ blocking mode and it even poll() will not block on it. The possible
+ operations on an open mbox file are:
+
+ read(2)
+ If a count smaller than four is requested, read returns -1 and
+ sets errno to EINVAL. If there is no data available in the mail
+ box, the return value is set to -1 and errno becomes EAGAIN.
+ When data has been read successfully, four bytes are placed in
+ the data buffer and the value four is returned.
+
+
+ /ibox
+ The second SPU to CPU communication mailbox. This file is similar to
+ the first mailbox file, but can be read in blocking I/O mode, and the
+ poll familiy of system calls can be used to wait for it. The possible
+ operations on an open ibox file are:
+
+ read(2)
+ If a count smaller than four is requested, read returns -1 and
+ sets errno to EINVAL. If there is no data available in the mail
+ box and the file descriptor has been opened with O_NONBLOCK, the
+ return value is set to -1 and errno becomes EAGAIN.
+
+ If there is no data available in the mail box and the file
+ descriptor has been opened without O_NONBLOCK, the call will
+ block until the SPU writes to its interrupt mailbox channel.
+ When data has been read successfully, four bytes are placed in
+ the data buffer and the value four is returned.
+
+ poll(2)
+ Poll on the ibox file returns (POLLIN | POLLRDNORM) whenever
+ data is available for reading.
+
+
+ /wbox
+ The CPU to SPU communation mailbox. It is write-only can can be written
+ in units of 32 bits. If the mailbox is full, write() will block and
+ poll can be used to wait for it becoming empty again. The possible
+ operations on an open wbox file are: write(2) If a count smaller than
+ four is requested, write returns -1 and sets errno to EINVAL. If there
+ is no space available in the mail box and the file descriptor has been
+ opened with O_NONBLOCK, the return value is set to -1 and errno becomes
+ EAGAIN.
+
+ If there is no space available in the mail box and the file descriptor
+ has been opened without O_NONBLOCK, the call will block until the SPU
+ reads from its PPE mailbox channel. When data has been read success-
+ fully, four bytes are placed in the data buffer and the value four is
+ returned.
+
+ poll(2)
+ Poll on the ibox file returns (POLLOUT | POLLWRNORM) whenever
+ space is available for writing.
+
+
+ /mbox_stat
+ /ibox_stat
+ /wbox_stat
+ Read-only files that contain the length of the current queue, i.e. how
+ many words can be read from mbox or ibox or how many words can be
+ written to wbox without blocking. The files can be read only in 4-byte
+ units and return a big-endian binary integer number. The possible
+ operations on an open *box_stat file are:
+
+ read(2)
+ If a count smaller than four is requested, read returns -1 and
+ sets errno to EINVAL. Otherwise, a four byte value is placed in
+ the data buffer, containing the number of elements that can be
+ read from (for mbox_stat and ibox_stat) or written to (for
+ wbox_stat) the respective mail box without blocking or resulting
+ in EAGAIN.
+
+
+ /npc
+ /decr
+ /decr_status
+ /spu_tag_mask
+ /event_mask
+ /srr0
+ Internal registers of the SPU. The representation is an ASCII string
+ with the numeric value of the next instruction to be executed. These
+ can be used in read/write mode for debugging, but normal operation of
+ programs should not rely on them because access to any of them except
+ npc requires an SPU context save and is therefore very inefficient.
+
+ The contents of these files are:
+
+ npc Next Program Counter
+
+ decr SPU Decrementer
+
+ decr_status Decrementer Status
+
+ spu_tag_mask MFC tag mask for SPU DMA
+
+ event_mask Event mask for SPU interrupts
+
+ srr0 Interrupt Return address register
+
+
+ The possible operations on an open npc, decr, decr_status,
+ spu_tag_mask, event_mask or srr0 file are:
+
+ read(2)
+ When the count supplied to the read call is shorter than the
+ required length for the pointer value plus a newline character,
+ subsequent reads from the same file descriptor will result in
+ completing the string, regardless of changes to the register by
+ a running SPU task. When a complete string has been read, all
+ subsequent read operations will return zero bytes and a new file
+ descriptor needs to be opened to read the value again.
+
+ write(2)
+ A write operation on the file results in setting the register to
+ the value given in the string. The string is parsed from the
+ beginning to the first non-numeric character or the end of the
+ buffer. Subsequent writes to the same file descriptor overwrite
+ the previous setting.
+
+
+ /fpcr
+ This file gives access to the Floating Point Status and Control Regis-
+ ter as a four byte long file. The operations on the fpcr file are:
+
+ read(2)
+ If a count smaller than four is requested, read returns -1 and
+ sets errno to EINVAL. Otherwise, a four byte value is placed in
+ the data buffer, containing the current value of the fpcr regis-
+ ter.
+
+ write(2)
+ If a count smaller than four is requested, write returns -1 and
+ sets errno to EINVAL. Otherwise, a four byte value is copied
+ from the data buffer, updating the value of the fpcr register.
+
+
+ /signal1
+ /signal2
+ The two signal notification channels of an SPU. These are read-write
+ files that operate on a 32 bit word. Writing to one of these files
+ triggers an interrupt on the SPU. The value writting to the signal
+ files can be read from the SPU through a channel read or from host user
+ space through the file. After the value has been read by the SPU, it
+ is reset to zero. The possible operations on an open signal1 or sig-
+ nal2 file are:
+
+ read(2)
+ If a count smaller than four is requested, read returns -1 and
+ sets errno to EINVAL. Otherwise, a four byte value is placed in
+ the data buffer, containing the current value of the specified
+ signal notification register.
+
+ write(2)
+ If a count smaller than four is requested, write returns -1 and
+ sets errno to EINVAL. Otherwise, a four byte value is copied
+ from the data buffer, updating the value of the specified signal
+ notification register. The signal notification register will
+ either be replaced with the input data or will be updated to the
+ bitwise OR or the old value and the input data, depending on the
+ contents of the signal1_type, or signal2_type respectively,
+ file.
+
+
+ /signal1_type
+ /signal2_type
+ These two files change the behavior of the signal1 and signal2 notifi-
+ cation files. The contain a numerical ASCII string which is read as
+ either "1" or "0". In mode 0 (overwrite), the hardware replaces the
+ contents of the signal channel with the data that is written to it. in
+ mode 1 (logical OR), the hardware accumulates the bits that are subse-
+ quently written to it. The possible operations on an open signal1_type
+ or signal2_type file are:
+
+ read(2)
+ When the count supplied to the read call is shorter than the
+ required length for the digit plus a newline character, subse-
+ quent reads from the same file descriptor will result in com-
+ pleting the string. When a complete string has been read, all
+ subsequent read operations will return zero bytes and a new file
+ descriptor needs to be opened to read the value again.
+
+ write(2)
+ A write operation on the file results in setting the register to
+ the value given in the string. The string is parsed from the
+ beginning to the first non-numeric character or the end of the
+ buffer. Subsequent writes to the same file descriptor overwrite
+ the previous setting.
+
+
+EXAMPLES
+ /etc/fstab entry
+ none /spu spufs gid=spu 0 0
+
+
+AUTHORS
+ Arnd Bergmann <arndb@de.ibm.com>, Mark Nutter <mnutter@us.ibm.com>,
+ Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
+
+SEE ALSO
+ capabilities(7), close(2), spu_create(2), spu_run(2), spufs(7)
+
+
+
+Linux 2005-09-28 SPUFS(2)
+
+------------------------------------------------------------------------------
+
+SPU_RUN(2) Linux Programmer's Manual SPU_RUN(2)
+
+
+
+NAME
+ spu_run - execute an spu context
+
+
+SYNOPSIS
+ #include <sys/spu.h>
+
+ int spu_run(int fd, unsigned int *npc, unsigned int *event);
+
+DESCRIPTION
+ The spu_run system call is used on PowerPC machines that implement the
+ Cell Broadband Engine Architecture in order to access Synergistic Pro-
+ cessor Units (SPUs). It uses the fd that was returned from spu_cre-
+ ate(2) to address a specific SPU context. When the context gets sched-
+ uled to a physical SPU, it starts execution at the instruction pointer
+ passed in npc.
+
+ Execution of SPU code happens synchronously, meaning that spu_run does
+ not return while the SPU is still running. If there is a need to exe-
+ cute SPU code in parallel with other code on either the main CPU or
+ other SPUs, you need to create a new thread of execution first, e.g.
+ using the pthread_create(3) call.
+
+ When spu_run returns, the current value of the SPU instruction pointer
+ is written back to npc, so you can call spu_run again without updating
+ the pointers.
+
+ event can be a NULL pointer or point to an extended status code that
+ gets filled when spu_run returns. It can be one of the following con-
+ stants:
+
+ SPE_EVENT_DMA_ALIGNMENT
+ A DMA alignment error
+
+ SPE_EVENT_SPE_DATA_SEGMENT
+ A DMA segmentation error
+
+ SPE_EVENT_SPE_DATA_STORAGE
+ A DMA storage error
+
+ If NULL is passed as the event argument, these errors will result in a
+ signal delivered to the calling process.
+
+RETURN VALUE
+ spu_run returns the value of the spu_status register or -1 to indicate
+ an error and set errno to one of the error codes listed below. The
+ spu_status register value contains a bit mask of status codes and
+ optionally a 14 bit code returned from the stop-and-signal instruction
+ on the SPU. The bit masks for the status codes are:
+
+ 0x02 SPU was stopped by stop-and-signal.
+
+ 0x04 SPU was stopped by halt.
+
+ 0x08 SPU is waiting for a channel.
+
+ 0x10 SPU is in single-step mode.
+
+ 0x20 SPU has tried to execute an invalid instruction.
+
+ 0x40 SPU has tried to access an invalid channel.
+
+ 0x3fff0000
+ The bits masked with this value contain the code returned from
+ stop-and-signal.
+
+ There are always one or more of the lower eight bits set or an error
+ code is returned from spu_run.
+
+ERRORS
+ EAGAIN or EWOULDBLOCK
+ fd is in non-blocking mode and spu_run would block.
+
+ EBADF fd is not a valid file descriptor.
+
+ EFAULT npc is not a valid pointer or status is neither NULL nor a valid
+ pointer.
+
+ EINTR A signal occured while spu_run was in progress. The npc value
+ has been updated to the new program counter value if necessary.
+
+ EINVAL fd is not a file descriptor returned from spu_create(2).
+
+ ENOMEM Insufficient memory was available to handle a page fault result-
+ ing from an MFC direct memory access.
+
+ ENOSYS the functionality is not provided by the current system, because
+ either the hardware does not provide SPUs or the spufs module is
+ not loaded.
+
+
+NOTES
+ spu_run is meant to be used from libraries that implement a more
+ abstract interface to SPUs, not to be used from regular applications.
+ See http://www.bsc.es/projects/deepcomputing/linuxoncell/ for the rec-
+ ommended libraries.
+
+
+CONFORMING TO
+ This call is Linux specific and only implemented by the ppc64 architec-
+ ture. Programs using this system call are not portable.
+
+
+BUGS
+ The code does not yet fully implement all features lined out here.
+
+
+AUTHOR
+ Arnd Bergmann <arndb@de.ibm.com>
+
+SEE ALSO
+ capabilities(7), close(2), spu_create(2), spufs(7)
+
+
+
+Linux 2005-09-28 SPU_RUN(2)
+
+------------------------------------------------------------------------------
+
+SPU_CREATE(2) Linux Programmer's Manual SPU_CREATE(2)
+
+
+
+NAME
+ spu_create - create a new spu context
+
+
+SYNOPSIS
+ #include <sys/types.h>
+ #include <sys/spu.h>
+
+ int spu_create(const char *pathname, int flags, mode_t mode);
+
+DESCRIPTION
+ The spu_create system call is used on PowerPC machines that implement
+ the Cell Broadband Engine Architecture in order to access Synergistic
+ Processor Units (SPUs). It creates a new logical context for an SPU in
+ pathname and returns a handle to associated with it. pathname must
+ point to a non-existing directory in the mount point of the SPU file
+ system (spufs). When spu_create is successful, a directory gets cre-
+ ated on pathname and it is populated with files.
+
+ The returned file handle can only be passed to spu_run(2) or closed,
+ other operations are not defined on it. When it is closed, all associ-
+ ated directory entries in spufs are removed. When the last file handle
+ pointing either inside of the context directory or to this file
+ descriptor is closed, the logical SPU context is destroyed.
+
+ The parameter flags can be zero or any bitwise or'd combination of the
+ following constants:
+
+ SPU_RAWIO
+ Allow mapping of some of the hardware registers of the SPU into
+ user space. This flag requires the CAP_SYS_RAWIO capability, see
+ capabilities(7).
+
+ The mode parameter specifies the permissions used for creating the new
+ directory in spufs. mode is modified with the user's umask(2) value
+ and then used for both the directory and the files contained in it. The
+ file permissions mask out some more bits of mode because they typically
+ support only read or write access. See stat(2) for a full list of the
+ possible mode values.
+
+
+RETURN VALUE
+ spu_create returns a new file descriptor. It may return -1 to indicate
+ an error condition and set errno to one of the error codes listed
+ below.
+
+
+ERRORS
+ EACCESS
+ The current user does not have write access on the spufs mount
+ point.
+
+ EEXIST An SPU context already exists at the given path name.
+
+ EFAULT pathname is not a valid string pointer in the current address
+ space.
+
+ EINVAL pathname is not a directory in the spufs mount point.
+
+ ELOOP Too many symlinks were found while resolving pathname.
+
+ EMFILE The process has reached its maximum open file limit.
+
+ ENAMETOOLONG
+ pathname was too long.
+
+ ENFILE The system has reached the global open file limit.
+
+ ENOENT Part of pathname could not be resolved.
+
+ ENOMEM The kernel could not allocate all resources required.
+
+ ENOSPC There are not enough SPU resources available to create a new
+ context or the user specific limit for the number of SPU con-
+ texts has been reached.
+
+ ENOSYS the functionality is not provided by the current system, because
+ either the hardware does not provide SPUs or the spufs module is
+ not loaded.
+
+ ENOTDIR
+ A part of pathname is not a directory.
+
+
+
+NOTES
+ spu_create is meant to be used from libraries that implement a more
+ abstract interface to SPUs, not to be used from regular applications.
+ See http://www.bsc.es/projects/deepcomputing/linuxoncell/ for the rec-
+ ommended libraries.
+
+
+FILES
+ pathname must point to a location beneath the mount point of spufs. By
+ convention, it gets mounted in /spu.
+
+
+CONFORMING TO
+ This call is Linux specific and only implemented by the ppc64 architec-
+ ture. Programs using this system call are not portable.
+
+
+BUGS
+ The code does not yet fully implement all features lined out here.
+
+
+AUTHOR
+ Arnd Bergmann <arndb@de.ibm.com>
+
+SEE ALSO
+ capabilities(7), close(2), spu_run(2), spufs(7)
+
+
+
+Linux 2005-09-28 SPU_CREATE(2)
diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX
index e7bea0a407b4..d6d65b9bcfe3 100644
--- a/Documentation/powerpc/00-INDEX
+++ b/Documentation/powerpc/00-INDEX
@@ -8,12 +8,18 @@ please mail me.
cpu_features.txt
- info on how we support a variety of CPUs with minimal compile-time
options.
+eeh-pci-error-recovery.txt
+ - info on PCI Bus EEH Error Recovery
+hvcs.txt
+ - IBM "Hypervisor Virtual Console Server" Installation Guide
+mpc52xx.txt
+ - Linux 2.6.x on MPC52xx family
ppc_htab.txt
- info about the Linux/PPC /proc/ppc_htab entry
-smp.txt
- - use and state info about Linux/PPC on MP machines
SBC8260_memory_mapping.txt
- EST SBC8260 board info
+smp.txt
+ - use and state info about Linux/PPC on MP machines
sound.txt
- info on sound support under Linux/PPC
zImage_layout.txt
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 331483ace0d9..28004f002ec9 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -47,7 +47,7 @@ config PPC
config EARLY_PRINTK
bool
- default y if PPC64
+ default y
config COMPAT
bool
@@ -297,6 +297,7 @@ config PPC_PMAC64
bool
depends on PPC_PMAC && POWER4
select U3_DART
+ select MPIC_BROKEN_U3
select GENERIC_TBSYNC
default y
@@ -325,9 +326,7 @@ config PPC_CELL
select MMIO_NVRAM
config PPC_OF
- bool
- depends on PPC_MULTIPLATFORM # for now
- default y
+ def_bool y
config XICS
depends on PPC_PSERIES
@@ -376,11 +375,28 @@ config CELL_IIC
bool
default y
+config CRASH_DUMP
+ bool "kernel crash dumps (EXPERIMENTAL)"
+ depends on PPC_MULTIPLATFORM
+ depends on EXPERIMENTAL
+ help
+ Build a kernel suitable for use as a kdump capture kernel.
+ The kernel will be linked at a different address than normal, and
+ so can only be used for Kdump.
+
+ Don't change this unless you know what you are doing.
+
config IBMVIO
depends on PPC_PSERIES || PPC_ISERIES
bool
default y
+config IBMEBUS
+ depends on PPC_PSERIES
+ bool "Support for GX bus based adapters"
+ help
+ Bus device driver for GX bus based adapters.
+
config PPC_MPC106
bool
default n
@@ -472,6 +488,7 @@ source arch/powerpc/platforms/embedded6xx/Kconfig
source arch/powerpc/platforms/4xx/Kconfig
source arch/powerpc/platforms/85xx/Kconfig
source arch/powerpc/platforms/8xx/Kconfig
+source arch/powerpc/platforms/cell/Kconfig
menu "Kernel options"
@@ -575,11 +592,12 @@ config ARCH_SELECT_MEMORY_MODEL
depends on PPC64
config ARCH_FLATMEM_ENABLE
- def_bool y
- depends on PPC64 && !NUMA
+ def_bool y
+ depends on (PPC64 && !NUMA) || PPC32
config ARCH_SPARSEMEM_ENABLE
def_bool y
+ depends on PPC64
config ARCH_SPARSEMEM_DEFAULT
def_bool y
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index a13eb575f834..5f80e58e5cb3 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -151,7 +151,7 @@ CPPFLAGS_vmlinux.lds := -Upowerpc
# All the instructions talk about "make bzImage".
bzImage: zImage
-BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm
+BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm uImage
.PHONY: $(BOOT_TARGETS)
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 9770f587af73..22726aefc8ea 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -143,6 +143,36 @@ $(obj)/zImage.initrd: $(obj)/zImage.initrd.vmode $(obj)/addnote
@cp -f $< $@
$(call if_changed,addnote)
+#-----------------------------------------------------------
+# build u-boot images
+#-----------------------------------------------------------
+quiet_cmd_mygzip = GZIP $@
+cmd_mygzip = gzip -f -9 < $< > $@.$$$$ && mv $@.$$$$ $@
+
+quiet_cmd_objbin = OBJCOPY $@
+ cmd_objbin = $(OBJCOPY) -O binary $< $@
+
+quiet_cmd_uimage = UIMAGE $@
+ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A ppc -O linux -T kernel \
+ -C gzip -a 00000000 -e 00000000 -n 'Linux-$(KERNELRELEASE)' \
+ -d $< $@
+
+MKIMAGE := $(srctree)/scripts/mkuboot.sh
+targets += uImage
+extra-y += vmlinux.bin vmlinux.gz
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objbin)
+
+$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,mygzip)
+
+$(obj)/uImage: $(obj)/vmlinux.gz
+ $(Q)rm -f $@
+ $(call cmd,uimage)
+ @echo -n ' Image: $@ '
+ @if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi
+
install: $(CONFIGURE) $(BOOTIMAGE)
sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" "$(BOOTIMAGE)"
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
new file mode 100644
index 000000000000..398203bd98eb
--- /dev/null
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -0,0 +1,1729 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.15-rc5
+# Tue Dec 13 17:24:05 2005
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_52xx is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+# CONFIG_E500 is not set
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_SMP is not set
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_LBD=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
+# CONFIG_PPC_CHRP is not set
+CONFIG_PPC_PMAC=y
+CONFIG_PPC_OF=y
+CONFIG_MPIC=y
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PPC_MPC106=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_PMAC=y
+CONFIG_PPC601_SYNC_FIX=y
+# CONFIG_TAU is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+CONFIG_PM_DEBUG=y
+CONFIG_SOFTWARE_SUSPEND=y
+CONFIG_PM_STD_PARTITION=""
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=m
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+CONFIG_IP_NF_NETBIOS_NS=m
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_REALM is not set
+# CONFIG_IP_NF_MATCH_SCTP is not set
+CONFIG_IP_NF_MATCH_DCCP=m
+# CONFIG_IP_NF_MATCH_COMMENT is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+# CONFIG_IP_NF_TARGET_LOG is not set
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
+# CONFIG_IP_NF_MANGLE is not set
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP_CCID3=m
+CONFIG_IP_DCCP_TFRC_LIB=m
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+# CONFIG_IP_DCCP_UNLOAD_HACK is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_NSC_FIR is not set
+# CONFIG_WINBOND_FIR is not set
+# CONFIG_TOSHIBA_FIR is not set
+# CONFIG_SMC_IRCC_FIR is not set
+# CONFIG_ALI_FIR is not set
+# CONFIG_VLSI_FIR is not set
+# CONFIG_VIA_FIR is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+# CONFIG_BT_HCIUSB_SCO is not set
+# CONFIG_BT_HCIUART is not set
+CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBPA10X is not set
+CONFIG_BT_HCIBFUSB=m
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIVHCI is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+CONFIG_MAC_FLOPPY=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_UB=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=m
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=y
+CONFIG_BLK_DEV_IDESCSI=y
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_SL82C105=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+CONFIG_BLK_DEV_PDC202XX_NEW=y
+# CONFIG_PDC202XX_FORCE is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_BLK_DEV_IDE_PMAC=y
+CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
+CONFIG_BLK_DEV_IDEDMA_PMAC=y
+CONFIG_BLK_DEV_IDE_PMAC_BLINK=y
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+CONFIG_AIC7XXX_DEBUG_ENABLE=y
+CONFIG_AIC7XXX_DEBUG_MASK=0
+CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
+CONFIG_SCSI_AIC7XXX_OLD=m
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SCSI_MESH=y
+CONFIG_SCSI_MESH_SYNC_RATE=5
+CONFIG_SCSI_MESH_RESET_DELAY_MS=1000
+CONFIG_SCSI_MAC53C94=y
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_IEEE1394=m
+
+#
+# Subsystem Options
+#
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_IEEE1394_OUI_DB is not set
+CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
+CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
+# CONFIG_IEEE1394_EXPORT_FULL_API is not set
+
+#
+# Device Drivers
+#
+# CONFIG_IEEE1394_PCILYNX is not set
+CONFIG_IEEE1394_OHCI1394=m
+
+#
+# Protocol Drivers
+#
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_SBP2=m
+# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
+CONFIG_IEEE1394_ETH1394=m
+CONFIG_IEEE1394_DV1394=m
+CONFIG_IEEE1394_RAWIO=m
+# CONFIG_IEEE1394_CMP is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+CONFIG_ADB=y
+CONFIG_ADB_CUDA=y
+CONFIG_ADB_PMU=y
+CONFIG_PMAC_APM_EMU=y
+CONFIG_PMAC_MEDIABAY=y
+CONFIG_PMAC_BACKLIGHT=y
+CONFIG_INPUT_ADBHID=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_THERM_WINDTUNNEL=m
+CONFIG_THERM_ADT746X=m
+# CONFIG_WINDFARM is not set
+# CONFIG_ANSLCD is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACE=y
+# CONFIG_MACE_AAUI_PORT is not set
+CONFIG_BMAC=y
+# CONFIG_HAPPYMEAL is not set
+CONFIG_SUNGEM=y
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_MV643XX_ETH is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_AIRO is not set
+CONFIG_HERMES=m
+CONFIG_APPLE_AIRPORT=m
+# CONFIG_PLX_HERMES is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_NORTEL_HERMES is not set
+# CONFIG_PCI_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+# CONFIG_PCMCIA_HERMES is not set
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+CONFIG_PRISM54=m
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=m
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_NVRAM=y
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+CONFIG_AGP=m
+CONFIG_AGP_UNINORTH=m
+CONFIG_DRM=m
+# CONFIG_DRM_TDFX is not set
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+# CONFIG_DRM_MGA is not set
+# CONFIG_DRM_SIS is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_KEYWEST=m
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_MACMODES=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_OF=y
+CONFIG_FB_CONTROL=y
+CONFIG_FB_PLATINUM=y
+CONFIG_FB_VALKYRIE=y
+CONFIG_FB_CT65550=y
+# CONFIG_FB_ASILIANT is not set
+CONFIG_FB_IMSTT=y
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_NVIDIA=y
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_RIVA is not set
+CONFIG_FB_MATROX=y
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+# CONFIG_FB_MATROX_G is not set
+# CONFIG_FB_MATROX_I2C is not set
+# CONFIG_FB_MATROX_MULTIHEAD is not set
+# CONFIG_FB_RADEON_OLD is not set
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=y
+CONFIG_FB_ATY=y
+CONFIG_FB_ATY_CT=y
+# CONFIG_FB_ATY_GENERIC_LCD is not set
+# CONFIG_FB_ATY_XL_INIT is not set
+CONFIG_FB_ATY_GX=y
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+CONFIG_FB_3DFX=y
+# CONFIG_FB_3DFX_ACCEL is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+CONFIG_DMASOUND_PMAC=m
+CONFIG_DMASOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
+
+#
+# Generic devices
+#
+CONFIG_SND_DUMMY=m
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# ALSA PowerMac devices
+#
+CONFIG_SND_POWERMAC=m
+# CONFIG_SND_POWERMAC_AUTO_DRC is not set
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_USX2Y is not set
+
+#
+# PCMCIA devices
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+CONFIG_USB_APPLETOUCH=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_LOCKD=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+
+#
+# Instrumentation Support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUGGER=y
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
+# CONFIG_BDI_SWITCH is not set
+CONFIG_BOOTX_TEXT=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 9ed551b6c172..6e03b595b6c8 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -17,11 +17,11 @@ obj-y += vdso32/
obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \
signal_64.o ptrace32.o systbl.o \
paca.o ioctl32.o cpu_setup_power4.o \
- firmware.o sysfs.o udbg.o idle_64.o
+ firmware.o sysfs.o idle_64.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
obj-$(CONFIG_POWER4) += idle_power4.o
-obj-$(CONFIG_PPC_OF) += of_device.o
+obj-$(CONFIG_PPC_OF) += of_device.o prom_parse.o
procfs-$(CONFIG_PPC64) := proc_ppc64.o
obj-$(CONFIG_PROC_FS) += $(procfs-y)
rtaspci-$(CONFIG_PPC64) := rtas_pci.o
@@ -30,12 +30,10 @@ obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o
obj-$(CONFIG_RTAS_PROC) += rtas-proc.o
obj-$(CONFIG_LPARCFG) += lparcfg.o
obj-$(CONFIG_IBMVIO) += vio.o
+obj-$(CONFIG_IBMEBUS) += ibmebus.o
obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o
-obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o
-obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o
-udbgscc-$(CONFIG_PPC64) := udbg_scc.o
-obj-$(CONFIG_PPC_PMAC) += $(udbgscc-y)
obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o
+obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
ifeq ($(CONFIG_PPC_MERGE),y)
@@ -48,25 +46,25 @@ extra-$(CONFIG_8xx) := head_8xx.o
extra-y += vmlinux.lds
obj-y += process.o init_task.o time.o \
- prom.o traps.o setup-common.o
+ prom.o traps.o setup-common.o udbg.o
obj-$(CONFIG_PPC32) += entry_32.o setup_32.o misc_32.o systbl.o
obj-$(CONFIG_PPC64) += misc_64.o dma_64.o iommu.o
-obj-$(CONFIG_PPC_OF) += prom_init.o
+obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o
obj-$(CONFIG_MODULES) += ppc_ksyms.o
obj-$(CONFIG_BOOTX_TEXT) += btext.o
obj-$(CONFIG_6xx) += idle_6xx.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_KPROBES) += kprobes.o
-
+obj-$(CONFIG_SERIAL_8250) += legacy_serial.o udbg_16550.o
module-$(CONFIG_PPC64) += module_64.o
obj-$(CONFIG_MODULES) += $(module-y)
pci64-$(CONFIG_PPC64) += pci_64.o pci_dn.o pci_iommu.o \
pci_direct_iommu.o iomap.o
obj-$(CONFIG_PCI) += $(pci64-y)
-
-kexec64-$(CONFIG_PPC64) += machine_kexec_64.o
-obj-$(CONFIG_KEXEC) += $(kexec64-y)
+kexec-$(CONFIG_PPC64) := machine_kexec_64.o
+kexec-$(CONFIG_PPC32) := machine_kexec_32.o
+obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o $(kexec-y)
ifeq ($(CONFIG_PPC_ISERIES),y)
$(obj)/head_64.o: $(obj)/lparmap.s
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 91538d2445bf..56399c5c931a 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -92,9 +92,9 @@ int main(void)
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
- DEFINE(TI_SC_NOERR, offsetof(struct thread_info, syscall_noerror));
-#ifdef CONFIG_PPC32
+ DEFINE(TI_SIGFRAME, offsetof(struct thread_info, nvgprs_frame));
DEFINE(TI_TASK, offsetof(struct thread_info, task));
+#ifdef CONFIG_PPC32
DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
#endif /* CONFIG_PPC32 */
@@ -131,11 +131,9 @@ int main(void)
DEFINE(PACALOWHTLBAREAS, offsetof(struct paca_struct, context.low_htlb_areas));
DEFINE(PACAHIGHHTLBAREAS, offsetof(struct paca_struct, context.high_htlb_areas));
#endif /* CONFIG_HUGETLB_PAGE */
- DEFINE(PACADEFAULTDECR, offsetof(struct paca_struct, default_decr));
DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen));
DEFINE(PACA_EXMC, offsetof(struct paca_struct, exmc));
DEFINE(PACA_EXSLB, offsetof(struct paca_struct, exslb));
- DEFINE(PACA_EXDSI, offsetof(struct paca_struct, exdsi));
DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp));
DEFINE(PACALPPACA, offsetof(struct paca_struct, lppaca));
DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id));
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index bdfba92b2b38..6223d39177cb 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -31,15 +31,18 @@ static void draw_byte_32(unsigned char *bits, unsigned int *base, int rb);
static void draw_byte_16(unsigned char *bits, unsigned int *base, int rb);
static void draw_byte_8(unsigned char *bits, unsigned int *base, int rb);
-static int g_loc_X;
-static int g_loc_Y;
-static int g_max_loc_X;
-static int g_max_loc_Y;
+#define __force_data __attribute__((__section__(".data")))
-static int dispDeviceRowBytes;
-static int dispDeviceDepth;
-static int dispDeviceRect[4];
-static unsigned char *dispDeviceBase, *logicalDisplayBase;
+static int g_loc_X __force_data;
+static int g_loc_Y __force_data;
+static int g_max_loc_X __force_data;
+static int g_max_loc_Y __force_data;
+
+static int dispDeviceRowBytes __force_data;
+static int dispDeviceDepth __force_data;
+static int dispDeviceRect[4] __force_data;
+static unsigned char *dispDeviceBase __force_data;
+static unsigned char *logicalDisplayBase __force_data;
unsigned long disp_BAT[2] __initdata = {0, 0};
@@ -47,7 +50,7 @@ unsigned long disp_BAT[2] __initdata = {0, 0};
static unsigned char vga_font[cmapsz];
-int boot_text_mapped;
+int boot_text_mapped __force_data = 0;
int force_printk_to_btext = 0;
#ifdef CONFIG_PPC32
@@ -57,7 +60,7 @@ int force_printk_to_btext = 0;
*
* The display is mapped to virtual address 0xD0000000, rather
* than 1:1, because some some CHRP machines put the frame buffer
- * in the region starting at 0xC0000000 (KERNELBASE).
+ * in the region starting at 0xC0000000 (PAGE_OFFSET).
* This mapping is temporary and will disappear as soon as the
* setup done by MMU_Init() is applied.
*
@@ -66,10 +69,9 @@ int force_printk_to_btext = 0;
* is really badly aligned, but I didn't encounter this case
* yet.
*/
-void __init
-btext_prepare_BAT(void)
+void __init btext_prepare_BAT(void)
{
- unsigned long vaddr = KERNELBASE + 0x10000000;
+ unsigned long vaddr = PAGE_OFFSET + 0x10000000;
unsigned long addr;
unsigned long lowbits;
@@ -95,12 +97,13 @@ btext_prepare_BAT(void)
}
#endif
-/* This function will enable the early boot text when doing OF booting. This
- * way, xmon output should work too
+
+/* This function can be used to enable the early boot text when doing
+ * OF booting or within bootx init. It must be followed by a btext_unmap()
+ * call before the logical address becomes unuseable
*/
-void __init
-btext_setup_display(int width, int height, int depth, int pitch,
- unsigned long address)
+void __init btext_setup_display(int width, int height, int depth, int pitch,
+ unsigned long address)
{
g_loc_X = 0;
g_loc_Y = 0;
@@ -116,6 +119,11 @@ btext_setup_display(int width, int height, int depth, int pitch,
boot_text_mapped = 1;
}
+void __init btext_unmap(void)
+{
+ boot_text_mapped = 0;
+}
+
/* Here's a small text engine to use during early boot
* or for debugging purposes
*
@@ -127,7 +135,7 @@ btext_setup_display(int width, int height, int depth, int pitch,
* changes.
*/
-void map_boot_text(void)
+static void map_boot_text(void)
{
unsigned long base, offset, size;
unsigned char *vbase;
@@ -175,8 +183,9 @@ int btext_initialize(struct device_node *np)
if (prop)
address = *prop;
- /* FIXME: Add support for PCI reg properties */
-
+ /* FIXME: Add support for PCI reg properties. Right now, only
+ * reliable on macs
+ */
if (address == 0)
return -EINVAL;
@@ -184,7 +193,6 @@ int btext_initialize(struct device_node *np)
g_loc_Y = 0;
g_max_loc_X = width / 8;
g_max_loc_Y = height / 16;
- logicalDisplayBase = (unsigned char *)address;
dispDeviceBase = (unsigned char *)address;
dispDeviceRowBytes = pitch;
dispDeviceDepth = depth;
@@ -197,14 +205,12 @@ int btext_initialize(struct device_node *np)
return 0;
}
-void __init init_boot_display(void)
+int __init btext_find_display(int allow_nonstdout)
{
char *name;
struct device_node *np = NULL;
int rc = -ENODEV;
- printk("trying to initialize btext ...\n");
-
name = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
if (name != NULL) {
np = of_find_node_by_path(name);
@@ -218,8 +224,8 @@ void __init init_boot_display(void)
}
if (np)
rc = btext_initialize(np);
- if (rc == 0)
- return;
+ if (rc == 0 || !allow_nonstdout)
+ return rc;
for (np = NULL; (np = of_find_node_by_type(np, "display"));) {
if (get_property(np, "linux,opened", NULL)) {
@@ -228,8 +234,9 @@ void __init init_boot_display(void)
printk("result: %d\n", rc);
}
if (rc == 0)
- return;
+ break;
}
+ return rc;
}
/* Calc the base address of a given point (x,y) */
@@ -277,44 +284,83 @@ EXPORT_SYMBOL(btext_update_display);
void btext_clearscreen(void)
{
- unsigned long *base = (unsigned long *)calc_base(0, 0);
+ unsigned int *base = (unsigned int *)calc_base(0, 0);
unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) *
- (dispDeviceDepth >> 3)) >> 3;
+ (dispDeviceDepth >> 3)) >> 2;
int i,j;
for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1]); i++)
{
- unsigned long *ptr = base;
+ unsigned int *ptr = base;
for(j=width; j; --j)
*(ptr++) = 0;
- base += (dispDeviceRowBytes >> 3);
+ base += (dispDeviceRowBytes >> 2);
}
}
+void btext_flushscreen(void)
+{
+ unsigned int *base = (unsigned int *)calc_base(0, 0);
+ unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) *
+ (dispDeviceDepth >> 3)) >> 2;
+ int i,j;
+
+ for (i=0; i < (dispDeviceRect[3] - dispDeviceRect[1]); i++)
+ {
+ unsigned int *ptr = base;
+ for(j = width; j > 0; j -= 8) {
+ __asm__ __volatile__ ("dcbst 0,%0" :: "r" (ptr));
+ ptr += 8;
+ }
+ base += (dispDeviceRowBytes >> 2);
+ }
+ __asm__ __volatile__ ("sync" ::: "memory");
+}
+
+void btext_flushline(void)
+{
+ unsigned int *base = (unsigned int *)calc_base(0, g_loc_Y << 4);
+ unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) *
+ (dispDeviceDepth >> 3)) >> 2;
+ int i,j;
+
+ for (i=0; i < 16; i++)
+ {
+ unsigned int *ptr = base;
+ for(j = width; j > 0; j -= 8) {
+ __asm__ __volatile__ ("dcbst 0,%0" :: "r" (ptr));
+ ptr += 8;
+ }
+ base += (dispDeviceRowBytes >> 2);
+ }
+ __asm__ __volatile__ ("sync" ::: "memory");
+}
+
+
#ifndef NO_SCROLL
static void scrollscreen(void)
{
- unsigned long *src = (unsigned long *)calc_base(0,16);
- unsigned long *dst = (unsigned long *)calc_base(0,0);
+ unsigned int *src = (unsigned int *)calc_base(0,16);
+ unsigned int *dst = (unsigned int *)calc_base(0,0);
unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) *
- (dispDeviceDepth >> 3)) >> 3;
+ (dispDeviceDepth >> 3)) >> 2;
int i,j;
for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1] - 16); i++)
{
- unsigned long *src_ptr = src;
- unsigned long *dst_ptr = dst;
+ unsigned int *src_ptr = src;
+ unsigned int *dst_ptr = dst;
for(j=width; j; --j)
*(dst_ptr++) = *(src_ptr++);
- src += (dispDeviceRowBytes >> 3);
- dst += (dispDeviceRowBytes >> 3);
+ src += (dispDeviceRowBytes >> 2);
+ dst += (dispDeviceRowBytes >> 2);
}
for (i=0; i<16; i++)
{
- unsigned long *dst_ptr = dst;
+ unsigned int *dst_ptr = dst;
for(j=width; j; --j)
*(dst_ptr++) = 0;
- dst += (dispDeviceRowBytes >> 3);
+ dst += (dispDeviceRowBytes >> 2);
}
}
#endif /* ndef NO_SCROLL */
@@ -377,6 +423,14 @@ void btext_drawstring(const char *c)
btext_drawchar(*c++);
}
+void btext_drawtext(const char *c, unsigned int len)
+{
+ if (!boot_text_mapped)
+ return;
+ while (len--)
+ btext_drawchar(*c++);
+}
+
void btext_drawhex(unsigned long v)
{
char *hex_table = "0123456789abcdef";
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 1d85cedbbb7b..43c74a6b07b1 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -78,10 +78,8 @@ struct cpu_spec cpu_specs[] = {
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power3,
-#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/power3",
- .oprofile_model = &op_model_rs64,
-#endif
+ .oprofile_type = RS64,
},
{ /* Power3+ */
.pvr_mask = 0xffff0000,
@@ -93,10 +91,8 @@ struct cpu_spec cpu_specs[] = {
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power3,
-#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/power3",
- .oprofile_model = &op_model_rs64,
-#endif
+ .oprofile_type = RS64,
},
{ /* Northstar */
.pvr_mask = 0xffff0000,
@@ -108,10 +104,8 @@ struct cpu_spec cpu_specs[] = {
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power3,
-#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/rs64",
- .oprofile_model = &op_model_rs64,
-#endif
+ .oprofile_type = RS64,
},
{ /* Pulsar */
.pvr_mask = 0xffff0000,
@@ -123,10 +117,8 @@ struct cpu_spec cpu_specs[] = {
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power3,
-#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/rs64",
- .oprofile_model = &op_model_rs64,
-#endif
+ .oprofile_type = RS64,
},
{ /* I-star */
.pvr_mask = 0xffff0000,
@@ -138,10 +130,8 @@ struct cpu_spec cpu_specs[] = {
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power3,
-#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/rs64",
- .oprofile_model = &op_model_rs64,
-#endif
+ .oprofile_type = RS64,
},
{ /* S-star */
.pvr_mask = 0xffff0000,
@@ -153,10 +143,8 @@ struct cpu_spec cpu_specs[] = {
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power3,
-#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/rs64",
- .oprofile_model = &op_model_rs64,
-#endif
+ .oprofile_type = RS64,
},
{ /* Power4 */
.pvr_mask = 0xffff0000,
@@ -168,10 +156,8 @@ struct cpu_spec cpu_specs[] = {
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power4,
-#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/power4",
- .oprofile_model = &op_model_rs64,
-#endif
+ .oprofile_type = POWER4,
},
{ /* Power4+ */
.pvr_mask = 0xffff0000,
@@ -183,10 +169,8 @@ struct cpu_spec cpu_specs[] = {
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power4,
-#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/power4",
- .oprofile_model = &op_model_power4,
-#endif
+ .oprofile_type = POWER4,
},
{ /* PPC970 */
.pvr_mask = 0xffff0000,
@@ -199,10 +183,8 @@ struct cpu_spec cpu_specs[] = {
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_ppc970,
-#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/970",
- .oprofile_model = &op_model_power4,
-#endif
+ .oprofile_type = POWER4,
},
#endif /* CONFIG_PPC64 */
#if defined(CONFIG_PPC64) || defined(CONFIG_POWER4)
@@ -221,10 +203,8 @@ struct cpu_spec cpu_specs[] = {
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_ppc970,
-#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/970",
- .oprofile_model = &op_model_power4,
-#endif
+ .oprofile_type = POWER4,
},
#endif /* defined(CONFIG_PPC64) || defined(CONFIG_POWER4) */
#ifdef CONFIG_PPC64
@@ -238,10 +218,8 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 128,
.dcache_bsize = 128,
.cpu_setup = __setup_cpu_ppc970,
-#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/970",
- .oprofile_model = &op_model_power4,
-#endif
+ .oprofile_type = POWER4,
},
{ /* Power5 GR */
.pvr_mask = 0xffff0000,
@@ -253,27 +231,23 @@ struct cpu_spec cpu_specs[] = {
.dcache_bsize = 128,
.num_pmcs = 6,
.cpu_setup = __setup_cpu_power4,
-#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/power5",
- .oprofile_model = &op_model_power4,
-#endif
+ .oprofile_type = POWER4,
},
{ /* Power5 GS */
.pvr_mask = 0xffff0000,
.pvr_value = 0x003b0000,
- .cpu_name = "POWER5 (gs)",
+ .cpu_name = "POWER5+ (gs)",
.cpu_features = CPU_FTRS_POWER5,
.cpu_user_features = COMMON_USER_POWER5_PLUS,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
.cpu_setup = __setup_cpu_power4,
-#ifdef CONFIG_OPROFILE
- .oprofile_cpu_type = "ppc64/power5",
- .oprofile_model = &op_model_power4,
-#endif
+ .oprofile_cpu_type = "ppc64/power5+",
+ .oprofile_type = POWER4,
},
- { /* BE DD1.x */
+ { /* Cell Broadband Engine */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00700000,
.cpu_name = "Cell Broadband Engine",
@@ -545,7 +519,9 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
- .cpu_setup = __setup_cpu_745x
+ .cpu_setup = __setup_cpu_745x,
+ .oprofile_cpu_type = "ppc/7450",
+ .oprofile_type = G4,
},
{ /* 7450 2.1 */
.pvr_mask = 0xffffffff,
@@ -556,7 +532,9 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
- .cpu_setup = __setup_cpu_745x
+ .cpu_setup = __setup_cpu_745x,
+ .oprofile_cpu_type = "ppc/7450",
+ .oprofile_type = G4,
},
{ /* 7450 2.3 and newer */
.pvr_mask = 0xffff0000,
@@ -567,7 +545,9 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
- .cpu_setup = __setup_cpu_745x
+ .cpu_setup = __setup_cpu_745x,
+ .oprofile_cpu_type = "ppc/7450",
+ .oprofile_type = G4,
},
{ /* 7455 rev 1.x */
.pvr_mask = 0xffffff00,
@@ -578,7 +558,9 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
- .cpu_setup = __setup_cpu_745x
+ .cpu_setup = __setup_cpu_745x,
+ .oprofile_cpu_type = "ppc/7450",
+ .oprofile_type = G4,
},
{ /* 7455 rev 2.0 */
.pvr_mask = 0xffffffff,
@@ -589,7 +571,9 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
- .cpu_setup = __setup_cpu_745x
+ .cpu_setup = __setup_cpu_745x,
+ .oprofile_cpu_type = "ppc/7450",
+ .oprofile_type = G4,
},
{ /* 7455 others */
.pvr_mask = 0xffff0000,
@@ -600,7 +584,9 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
- .cpu_setup = __setup_cpu_745x
+ .cpu_setup = __setup_cpu_745x,
+ .oprofile_cpu_type = "ppc/7450",
+ .oprofile_type = G4,
},
{ /* 7447/7457 Rev 1.0 */
.pvr_mask = 0xffffffff,
@@ -611,7 +597,9 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
- .cpu_setup = __setup_cpu_745x
+ .cpu_setup = __setup_cpu_745x,
+ .oprofile_cpu_type = "ppc/7450",
+ .oprofile_type = G4,
},
{ /* 7447/7457 Rev 1.1 */
.pvr_mask = 0xffffffff,
@@ -622,7 +610,9 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
- .cpu_setup = __setup_cpu_745x
+ .cpu_setup = __setup_cpu_745x,
+ .oprofile_cpu_type = "ppc/7450",
+ .oprofile_type = G4,
},
{ /* 7447/7457 Rev 1.2 and later */
.pvr_mask = 0xffff0000,
@@ -633,7 +623,9 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
- .cpu_setup = __setup_cpu_745x
+ .cpu_setup = __setup_cpu_745x,
+ .oprofile_cpu_type = "ppc/7450",
+ .oprofile_type = G4,
},
{ /* 7447A */
.pvr_mask = 0xffff0000,
@@ -644,7 +636,9 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
- .cpu_setup = __setup_cpu_745x
+ .cpu_setup = __setup_cpu_745x,
+ .oprofile_cpu_type = "ppc/7450",
+ .oprofile_type = G4,
},
{ /* 7448 */
.pvr_mask = 0xffff0000,
@@ -655,7 +649,9 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
- .cpu_setup = __setup_cpu_745x
+ .cpu_setup = __setup_cpu_745x,
+ .oprofile_cpu_type = "ppc/7450",
+ .oprofile_type = G4,
},
{ /* 82xx (8240, 8245, 8260 are all 603e cores) */
.pvr_mask = 0x7fff0000,
@@ -979,6 +975,8 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
+ .oprofile_cpu_type = "ppc/e500",
+ .oprofile_type = BOOKE,
},
{ /* e500v2 */
.pvr_mask = 0xffff0000,
@@ -992,6 +990,8 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
+ .oprofile_cpu_type = "ppc/e500",
+ .oprofile_type = BOOKE,
},
#endif
#if !CLASSIC_PPC
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
new file mode 100644
index 000000000000..4681155121ef
--- /dev/null
+++ b/arch/powerpc/kernel/crash.c
@@ -0,0 +1,264 @@
+/*
+ * Architecture specific (PPC64) functions for kexec based crash dumps.
+ *
+ * Copyright (C) 2005, IBM Corp.
+ *
+ * Created by: Haren Myneni
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/reboot.h>
+#include <linux/kexec.h>
+#include <linux/bootmem.h>
+#include <linux/crash_dump.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/elf.h>
+#include <linux/elfcore.h>
+#include <linux/init.h>
+#include <linux/types.h>
+
+#include <asm/processor.h>
+#include <asm/machdep.h>
+#include <asm/kdump.h>
+#include <asm/lmb.h>
+#include <asm/firmware.h>
+
+#ifdef DEBUG
+#include <asm/udbg.h>
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+/* This keeps a track of which one is crashing cpu. */
+int crashing_cpu = -1;
+
+static u32 *append_elf_note(u32 *buf, char *name, unsigned type, void *data,
+ size_t data_len)
+{
+ struct elf_note note;
+
+ note.n_namesz = strlen(name) + 1;
+ note.n_descsz = data_len;
+ note.n_type = type;
+ memcpy(buf, &note, sizeof(note));
+ buf += (sizeof(note) +3)/4;
+ memcpy(buf, name, note.n_namesz);
+ buf += (note.n_namesz + 3)/4;
+ memcpy(buf, data, note.n_descsz);
+ buf += (note.n_descsz + 3)/4;
+
+ return buf;
+}
+
+static void final_note(u32 *buf)
+{
+ struct elf_note note;
+
+ note.n_namesz = 0;
+ note.n_descsz = 0;
+ note.n_type = 0;
+ memcpy(buf, &note, sizeof(note));
+}
+
+static void crash_save_this_cpu(struct pt_regs *regs, int cpu)
+{
+ struct elf_prstatus prstatus;
+ u32 *buf;
+
+ if ((cpu < 0) || (cpu >= NR_CPUS))
+ return;
+
+ /* Using ELF notes here is opportunistic.
+ * I need a well defined structure format
+ * for the data I pass, and I need tags
+ * on the data to indicate what information I have
+ * squirrelled away. ELF notes happen to provide
+ * all of that that no need to invent something new.
+ */
+ buf = &crash_notes[cpu][0];
+ memset(&prstatus, 0, sizeof(prstatus));
+ prstatus.pr_pid = current->pid;
+ elf_core_copy_regs(&prstatus.pr_reg, regs);
+ buf = append_elf_note(buf, "CORE", NT_PRSTATUS, &prstatus,
+ sizeof(prstatus));
+ final_note(buf);
+}
+
+/* FIXME Merge this with xmon_save_regs ?? */
+static inline void crash_get_current_regs(struct pt_regs *regs)
+{
+ unsigned long tmp1, tmp2;
+
+ __asm__ __volatile__ (
+ "std 0,0(%2)\n"
+ "std 1,8(%2)\n"
+ "std 2,16(%2)\n"
+ "std 3,24(%2)\n"
+ "std 4,32(%2)\n"
+ "std 5,40(%2)\n"
+ "std 6,48(%2)\n"
+ "std 7,56(%2)\n"
+ "std 8,64(%2)\n"
+ "std 9,72(%2)\n"
+ "std 10,80(%2)\n"
+ "std 11,88(%2)\n"
+ "std 12,96(%2)\n"
+ "std 13,104(%2)\n"
+ "std 14,112(%2)\n"
+ "std 15,120(%2)\n"
+ "std 16,128(%2)\n"
+ "std 17,136(%2)\n"
+ "std 18,144(%2)\n"
+ "std 19,152(%2)\n"
+ "std 20,160(%2)\n"
+ "std 21,168(%2)\n"
+ "std 22,176(%2)\n"
+ "std 23,184(%2)\n"
+ "std 24,192(%2)\n"
+ "std 25,200(%2)\n"
+ "std 26,208(%2)\n"
+ "std 27,216(%2)\n"
+ "std 28,224(%2)\n"
+ "std 29,232(%2)\n"
+ "std 30,240(%2)\n"
+ "std 31,248(%2)\n"
+ "mfmsr %0\n"
+ "std %0, 264(%2)\n"
+ "mfctr %0\n"
+ "std %0, 280(%2)\n"
+ "mflr %0\n"
+ "std %0, 288(%2)\n"
+ "bl 1f\n"
+ "1: mflr %1\n"
+ "std %1, 256(%2)\n"
+ "mtlr %0\n"
+ "mfxer %0\n"
+ "std %0, 296(%2)\n"
+ : "=&r" (tmp1), "=&r" (tmp2)
+ : "b" (regs));
+}
+
+/* We may have saved_regs from where the error came from
+ * or it is NULL if via a direct panic().
+ */
+static void crash_save_self(struct pt_regs *saved_regs)
+{
+ struct pt_regs regs;
+ int cpu;
+
+ cpu = smp_processor_id();
+ if (saved_regs)
+ memcpy(&regs, saved_regs, sizeof(regs));
+ else
+ crash_get_current_regs(&regs);
+ crash_save_this_cpu(&regs, cpu);
+}
+
+#ifdef CONFIG_SMP
+static atomic_t waiting_for_crash_ipi;
+
+void crash_ipi_callback(struct pt_regs *regs)
+{
+ int cpu = smp_processor_id();
+
+ if (cpu == crashing_cpu)
+ return;
+
+ if (!cpu_online(cpu))
+ return;
+
+ if (ppc_md.kexec_cpu_down)
+ ppc_md.kexec_cpu_down(1, 1);
+
+ local_irq_disable();
+
+ crash_save_this_cpu(regs, cpu);
+ atomic_dec(&waiting_for_crash_ipi);
+ kexec_smp_wait();
+ /* NOTREACHED */
+}
+
+static void crash_kexec_prepare_cpus(void)
+{
+ unsigned int msecs;
+
+ atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1);
+
+ crash_send_ipi(crash_ipi_callback);
+ smp_wmb();
+
+ /*
+ * FIXME: Until we will have the way to stop other CPUSs reliabally,
+ * the crash CPU will send an IPI and wait for other CPUs to
+ * respond. If not, proceed the kexec boot even though we failed to
+ * capture other CPU states.
+ */
+ msecs = 1000000;
+ while ((atomic_read(&waiting_for_crash_ipi) > 0) && (--msecs > 0)) {
+ barrier();
+ mdelay(1);
+ }
+
+ /* Would it be better to replace the trap vector here? */
+
+ /*
+ * FIXME: In case if we do not get all CPUs, one possibility: ask the
+ * user to do soft reset such that we get all.
+ * IPI handler is already set by the panic cpu initially. Therefore,
+ * all cpus could invoke this handler from die() and the panic CPU
+ * will call machine_kexec() directly from this handler to do
+ * kexec boot.
+ */
+ if (atomic_read(&waiting_for_crash_ipi))
+ printk(KERN_ALERT "done waiting: %d cpus not responding\n",
+ atomic_read(&waiting_for_crash_ipi));
+ /* Leave the IPI callback set */
+}
+#else
+static void crash_kexec_prepare_cpus(void)
+{
+ /*
+ * move the secondarys to us so that we can copy
+ * the new kernel 0-0x100 safely
+ *
+ * do this if kexec in setup.c ?
+ */
+ smp_release_cpus();
+}
+
+#endif
+
+void default_machine_crash_shutdown(struct pt_regs *regs)
+{
+ /*
+ * This function is only called after the system
+ * has paniced or is otherwise in a critical state.
+ * The minimum amount of code to allow a kexec'd kernel
+ * to run successfully needs to happen here.
+ *
+ * In practice this means stopping other cpus in
+ * an SMP system.
+ * The kernel is broken so disable interrupts.
+ */
+ local_irq_disable();
+
+ if (ppc_md.kexec_cpu_down)
+ ppc_md.kexec_cpu_down(1, 0);
+
+ /*
+ * Make a note of crashing cpu. Will be used in machine_kexec
+ * such that another IPI will not be sent.
+ */
+ crashing_cpu = smp_processor_id();
+ crash_kexec_prepare_cpus();
+ crash_save_self(regs);
+}
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
new file mode 100644
index 000000000000..87effa3f21a7
--- /dev/null
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -0,0 +1,109 @@
+/*
+ * Routines for doing kexec-based kdump.
+ *
+ * Copyright (C) 2005, IBM Corp.
+ *
+ * Created by: Michael Ellerman
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#undef DEBUG
+
+#include <linux/crash_dump.h>
+#include <linux/bootmem.h>
+#include <asm/kdump.h>
+#include <asm/lmb.h>
+#include <asm/firmware.h>
+#include <asm/uaccess.h>
+
+#ifdef DEBUG
+#include <asm/udbg.h>
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+static void __init create_trampoline(unsigned long addr)
+{
+ /* The maximum range of a single instruction branch, is the current
+ * instruction's address + (32 MB - 4) bytes. For the trampoline we
+ * need to branch to current address + 32 MB. So we insert a nop at
+ * the trampoline address, then the next instruction (+ 4 bytes)
+ * does a branch to (32 MB - 4). The net effect is that when we
+ * branch to "addr" we jump to ("addr" + 32 MB). Although it requires
+ * two instructions it doesn't require any registers.
+ */
+ create_instruction(addr, 0x60000000); /* nop */
+ create_branch(addr + 4, addr + PHYSICAL_START, 0);
+}
+
+void __init kdump_setup(void)
+{
+ unsigned long i;
+
+ DBG(" -> kdump_setup()\n");
+
+ for (i = KDUMP_TRAMPOLINE_START; i < KDUMP_TRAMPOLINE_END; i += 8) {
+ create_trampoline(i);
+ }
+
+ create_trampoline(__pa(system_reset_fwnmi) - PHYSICAL_START);
+ create_trampoline(__pa(machine_check_fwnmi) - PHYSICAL_START);
+
+ DBG(" <- kdump_setup()\n");
+}
+
+static int __init parse_elfcorehdr(char *p)
+{
+ if (p)
+ elfcorehdr_addr = memparse(p, &p);
+
+ return 0;
+}
+__setup("elfcorehdr=", parse_elfcorehdr);
+
+static int __init parse_savemaxmem(char *p)
+{
+ if (p)
+ saved_max_pfn = (memparse(p, &p) >> PAGE_SHIFT) - 1;
+
+ return 0;
+}
+__setup("savemaxmem=", parse_savemaxmem);
+
+/*
+ * copy_oldmem_page - copy one page from "oldmem"
+ * @pfn: page frame number to be copied
+ * @buf: target memory address for the copy; this can be in kernel address
+ * space or user address space (see @userbuf)
+ * @csize: number of bytes to copy
+ * @offset: offset in bytes into the page (based on pfn) to begin the copy
+ * @userbuf: if set, @buf is in user address space, use copy_to_user(),
+ * otherwise @buf is in kernel address space, use memcpy().
+ *
+ * Copy a page from "oldmem". For this page, there is no pte mapped
+ * in the current kernel. We stitch up a pte, similar to kmap_atomic.
+ */
+ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
+ size_t csize, unsigned long offset, int userbuf)
+{
+ void *vaddr;
+
+ if (!csize)
+ return 0;
+
+ vaddr = __ioremap(pfn << PAGE_SHIFT, PAGE_SIZE, 0);
+
+ if (userbuf) {
+ if (copy_to_user((char __user *)buf, (vaddr + offset), csize)) {
+ iounmap(vaddr);
+ return -EFAULT;
+ }
+ } else
+ memcpy(buf, (vaddr + offset), csize);
+
+ iounmap(vaddr);
+ return csize;
+}
diff --git a/arch/powerpc/kernel/dma_64.c b/arch/powerpc/kernel/dma_64.c
index 7c3419656ccc..36aaa7663f02 100644
--- a/arch/powerpc/kernel/dma_64.c
+++ b/arch/powerpc/kernel/dma_64.c
@@ -10,6 +10,7 @@
/* Include the busses we support */
#include <linux/pci.h>
#include <asm/vio.h>
+#include <asm/ibmebus.h>
#include <asm/scatterlist.h>
#include <asm/bug.h>
@@ -23,6 +24,10 @@ static struct dma_mapping_ops *get_dma_ops(struct device *dev)
if (dev->bus == &vio_bus_type)
return &vio_dma_ops;
#endif
+#ifdef CONFIG_IBMEBUS
+ if (dev->bus == &ibmebus_bus_type)
+ return &ibmebus_dma_ops;
+#endif
return NULL;
}
@@ -47,6 +52,10 @@ int dma_set_mask(struct device *dev, u64 dma_mask)
if (dev->bus == &vio_bus_type)
return -EIO;
#endif /* CONFIG_IBMVIO */
+#ifdef CONFIG_IBMEBUS
+ if (dev->bus == &ibmebus_bus_type)
+ return -EIO;
+#endif
BUG();
return 0;
}
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 2e99ae41723c..036b71d2adfc 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -200,8 +200,6 @@ _GLOBAL(DoSyscall)
bl do_show_syscall
#endif /* SHOW_SYSCALLS */
rlwinm r10,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
- li r11,0
- stb r11,TI_SC_NOERR(r10)
lwz r11,TI_FLAGS(r10)
andi. r11,r11,_TIF_SYSCALL_T_OR_A
bne- syscall_dotrace
@@ -222,25 +220,21 @@ ret_from_syscall:
bl do_show_syscall_exit
#endif
mr r6,r3
- li r11,-_LAST_ERRNO
- cmplw 0,r3,r11
rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
- blt+ 30f
- lbz r11,TI_SC_NOERR(r12)
- cmpwi r11,0
- bne 30f
- neg r3,r3
- lwz r10,_CCR(r1) /* Set SO bit in CR */
- oris r10,r10,0x1000
- stw r10,_CCR(r1)
-
/* disable interrupts so current_thread_info()->flags can't change */
-30: LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */
+ LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */
SYNC
MTMSRD(r10)
lwz r9,TI_FLAGS(r12)
- andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED)
+ li r8,-_LAST_ERRNO
+ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL)
bne- syscall_exit_work
+ cmplw 0,r3,r8
+ blt+ syscall_exit_cont
+ lwz r11,_CCR(r1) /* Load CR */
+ neg r3,r3
+ oris r11,r11,0x1000 /* Set SO bit in CR */
+ stw r11,_CCR(r1)
syscall_exit_cont:
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
/* If the process has its own DBCR0 value, load it up. The single
@@ -292,46 +286,113 @@ syscall_dotrace:
b syscall_dotrace_cont
syscall_exit_work:
- stw r6,RESULT(r1) /* Save result */
+ andi. r0,r9,_TIF_RESTOREALL
+ bne- 2f
+ cmplw 0,r3,r8
+ blt+ 1f
+ andi. r0,r9,_TIF_NOERROR
+ bne- 1f
+ lwz r11,_CCR(r1) /* Load CR */
+ neg r3,r3
+ oris r11,r11,0x1000 /* Set SO bit in CR */
+ stw r11,_CCR(r1)
+
+1: stw r6,RESULT(r1) /* Save result */
stw r3,GPR3(r1) /* Update return value */
- andi. r0,r9,_TIF_SYSCALL_T_OR_A
- beq 5f
- ori r10,r10,MSR_EE
- SYNC
- MTMSRD(r10) /* re-enable interrupts */
+2: andi. r0,r9,(_TIF_PERSYSCALL_MASK)
+ beq 4f
+
+ /* Clear per-syscall TIF flags if any are set, but _leave_
+ _TIF_SAVE_NVGPRS set in r9 since we haven't dealt with that
+ yet. */
+
+ li r11,_TIF_PERSYSCALL_MASK
+ addi r12,r12,TI_FLAGS
+3: lwarx r8,0,r12
+ andc r8,r8,r11
+#ifdef CONFIG_IBM405_ERR77
+ dcbt 0,r12
+#endif
+ stwcx. r8,0,r12
+ bne- 3b
+ subi r12,r12,TI_FLAGS
+
+4: /* Anything which requires enabling interrupts? */
+ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SAVE_NVGPRS)
+ beq 7f
+
+ /* Save NVGPRS if they're not saved already */
lwz r4,_TRAP(r1)
andi. r4,r4,1
- beq 4f
+ beq 5f
SAVE_NVGPRS(r1)
li r4,0xc00
stw r4,_TRAP(r1)
-4:
+
+ /* Re-enable interrupts */
+5: ori r10,r10,MSR_EE
+ SYNC
+ MTMSRD(r10)
+
+ andi. r0,r9,_TIF_SAVE_NVGPRS
+ bne save_user_nvgprs
+
+save_user_nvgprs_cont:
+ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
+ beq 7f
+
addi r3,r1,STACK_FRAME_OVERHEAD
bl do_syscall_trace_leave
REST_NVGPRS(r1)
-2:
- lwz r3,GPR3(r1)
+
+6: lwz r3,GPR3(r1)
LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */
SYNC
MTMSRD(r10) /* disable interrupts again */
rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
lwz r9,TI_FLAGS(r12)
-5:
+7:
andi. r0,r9,_TIF_NEED_RESCHED
- bne 1f
+ bne 8f
lwz r5,_MSR(r1)
andi. r5,r5,MSR_PR
- beq syscall_exit_cont
+ beq ret_from_except
andi. r0,r9,_TIF_SIGPENDING
- beq syscall_exit_cont
+ beq ret_from_except
b do_user_signal
-1:
+8:
ori r10,r10,MSR_EE
SYNC
MTMSRD(r10) /* re-enable interrupts */
bl schedule
- b 2b
+ b 6b
+
+save_user_nvgprs:
+ lwz r8,TI_SIGFRAME(r12)
+
+.macro savewords start, end
+ 1: stw \start,4*(\start)(r8)
+ .section __ex_table,"a"
+ .align 2
+ .long 1b,save_user_nvgprs_fault
+ .previous
+ .if \end - \start
+ savewords "(\start+1)",\end
+ .endif
+.endm
+ savewords 14,31
+ b save_user_nvgprs_cont
+
+
+save_user_nvgprs_fault:
+ li r3,11 /* SIGSEGV */
+ lwz r4,TI_TASK(r12)
+ bl force_sigsegv
+ rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
+ lwz r9,TI_FLAGS(r12)
+ b save_user_nvgprs_cont
+
#ifdef SHOW_SYSCALLS
do_show_syscall:
#ifdef SHOW_SYSCALLS_TASK
@@ -401,28 +462,10 @@ show_syscalls_task:
#endif /* SHOW_SYSCALLS */
/*
- * The sigsuspend and rt_sigsuspend system calls can call do_signal
- * and thus put the process into the stopped state where we might
- * want to examine its user state with ptrace. Therefore we need
- * to save all the nonvolatile registers (r13 - r31) before calling
- * the C code.
+ * The fork/clone functions need to copy the full register set into
+ * the child process. Therefore we need to save all the nonvolatile
+ * registers (r13 - r31) before calling the C code.
*/
- .globl ppc_sigsuspend
-ppc_sigsuspend:
- SAVE_NVGPRS(r1)
- lwz r0,_TRAP(r1)
- rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */
- stw r0,_TRAP(r1) /* register set saved */
- b sys_sigsuspend
-
- .globl ppc_rt_sigsuspend
-ppc_rt_sigsuspend:
- SAVE_NVGPRS(r1)
- lwz r0,_TRAP(r1)
- rlwinm r0,r0,0,0,30
- stw r0,_TRAP(r1)
- b sys_rt_sigsuspend
-
.globl ppc_fork
ppc_fork:
SAVE_NVGPRS(r1)
@@ -447,14 +490,6 @@ ppc_clone:
stw r0,_TRAP(r1) /* register set saved */
b sys_clone
- .globl ppc_swapcontext
-ppc_swapcontext:
- SAVE_NVGPRS(r1)
- lwz r0,_TRAP(r1)
- rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */
- stw r0,_TRAP(r1) /* register set saved */
- b sys_swapcontext
-
/*
* Top-level page fault handling.
* This is in assembler because if do_page_fault tells us that
@@ -626,16 +661,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_601)
.long ret_from_except
#endif
- .globl sigreturn_exit
-sigreturn_exit:
- subi r1,r3,STACK_FRAME_OVERHEAD
- rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
- lwz r9,TI_FLAGS(r12)
- andi. r0,r9,_TIF_SYSCALL_T_OR_A
- beq+ ret_from_except_full
- bl do_syscall_trace_leave
- /* fall through */
-
.globl ret_from_except_full
ret_from_except_full:
REST_NVGPRS(r1)
@@ -658,7 +683,7 @@ user_exc_return: /* r10 contains MSR_KERNEL here */
/* Check current_thread_info()->flags */
rlwinm r9,r1,0,0,(31-THREAD_SHIFT)
lwz r9,TI_FLAGS(r9)
- andi. r0,r9,(_TIF_SIGPENDING|_TIF_NEED_RESCHED)
+ andi. r0,r9,(_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL)
bne do_work
restore_user:
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index bce33a38399f..aacebb33e98a 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -113,9 +113,7 @@ system_call_common:
addi r9,r1,STACK_FRAME_OVERHEAD
#endif
clrrdi r11,r1,THREAD_SHIFT
- li r12,0
ld r10,TI_FLAGS(r11)
- stb r12,TI_SC_NOERR(r11)
andi. r11,r10,_TIF_SYSCALL_T_OR_A
bne- syscall_dotrace
syscall_dotrace_cont:
@@ -144,24 +142,12 @@ system_call: /* label this so stack traces look sane */
bctrl /* Call handler */
syscall_exit:
+ std r3,RESULT(r1)
#ifdef SHOW_SYSCALLS
- std r3,GPR3(r1)
bl .do_show_syscall_exit
- ld r3,GPR3(r1)
+ ld r3,RESULT(r1)
#endif
- std r3,RESULT(r1)
- ld r5,_CCR(r1)
- li r10,-_LAST_ERRNO
- cmpld r3,r10
clrrdi r12,r1,THREAD_SHIFT
- bge- syscall_error
-syscall_error_cont:
-
- /* check for syscall tracing or audit */
- ld r9,TI_FLAGS(r12)
- andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
- bne- syscall_exit_trace
-syscall_exit_trace_cont:
/* disable interrupts so current_thread_info()->flags can't change,
and so that we don't get interrupted after loading SRR0/1. */
@@ -173,8 +159,13 @@ syscall_exit_trace_cont:
rotldi r10,r10,16
mtmsrd r10,1
ld r9,TI_FLAGS(r12)
- andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED)
+ li r11,-_LAST_ERRNO
+ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL|_TIF_SAVE_NVGPRS|_TIF_NOERROR)
bne- syscall_exit_work
+ cmpld r3,r11
+ ld r5,_CCR(r1)
+ bge- syscall_error
+syscall_error_cont:
ld r7,_NIP(r1)
stdcx. r0,0,r1 /* to clear the reservation */
andi. r6,r8,MSR_PR
@@ -193,21 +184,12 @@ syscall_exit_trace_cont:
rfid
b . /* prevent speculative execution */
-syscall_enosys:
- li r3,-ENOSYS
- std r3,RESULT(r1)
- clrrdi r12,r1,THREAD_SHIFT
- ld r5,_CCR(r1)
-
-syscall_error:
- lbz r11,TI_SC_NOERR(r12)
- cmpwi 0,r11,0
- bne- syscall_error_cont
- neg r3,r3
+syscall_error:
oris r5,r5,0x1000 /* Set SO bit in CR */
+ neg r3,r3
std r5,_CCR(r1)
b syscall_error_cont
-
+
/* Traced system call support */
syscall_dotrace:
bl .save_nvgprs
@@ -225,21 +207,69 @@ syscall_dotrace:
ld r10,TI_FLAGS(r10)
b syscall_dotrace_cont
-syscall_exit_trace:
- std r3,GPR3(r1)
- bl .save_nvgprs
+syscall_enosys:
+ li r3,-ENOSYS
+ b syscall_exit
+
+syscall_exit_work:
+ /* If TIF_RESTOREALL is set, don't scribble on either r3 or ccr.
+ If TIF_NOERROR is set, just save r3 as it is. */
+
+ andi. r0,r9,_TIF_RESTOREALL
+ bne- 2f
+ cmpld r3,r11 /* r10 is -LAST_ERRNO */
+ blt+ 1f
+ andi. r0,r9,_TIF_NOERROR
+ bne- 1f
+ ld r5,_CCR(r1)
+ neg r3,r3
+ oris r5,r5,0x1000 /* Set SO bit in CR */
+ std r5,_CCR(r1)
+1: std r3,GPR3(r1)
+2: andi. r0,r9,(_TIF_PERSYSCALL_MASK)
+ beq 4f
+
+ /* Clear per-syscall TIF flags if any are set, but _leave_
+ _TIF_SAVE_NVGPRS set in r9 since we haven't dealt with that
+ yet. */
+
+ li r11,_TIF_PERSYSCALL_MASK
+ addi r12,r12,TI_FLAGS
+3: ldarx r10,0,r12
+ andc r10,r10,r11
+ stdcx. r10,0,r12
+ bne- 3b
+ subi r12,r12,TI_FLAGS
+
+4: bl .save_nvgprs
+ /* Anything else left to do? */
+ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SAVE_NVGPRS)
+ beq .ret_from_except_lite
+
+ /* Re-enable interrupts */
+ mfmsr r10
+ ori r10,r10,MSR_EE
+ mtmsrd r10,1
+
+ andi. r0,r9,_TIF_SAVE_NVGPRS
+ bne save_user_nvgprs
+
+ /* If tracing, re-enable interrupts and do it */
+save_user_nvgprs_cont:
+ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
+ beq 5f
+
addi r3,r1,STACK_FRAME_OVERHEAD
bl .do_syscall_trace_leave
REST_NVGPRS(r1)
- ld r3,GPR3(r1)
- ld r5,_CCR(r1)
clrrdi r12,r1,THREAD_SHIFT
- b syscall_exit_trace_cont
-/* Stuff to do on exit from a system call. */
-syscall_exit_work:
- std r3,GPR3(r1)
- std r5,_CCR(r1)
+ /* Disable interrupts again and handle other work if any */
+5: mfmsr r10
+ rldicl r10,r10,48,1
+ rotldi r10,r10,16
+ mtmsrd r10,1
+
b .ret_from_except_lite
/* Save non-volatile GPRs, if not already saved. */
@@ -252,6 +282,52 @@ _GLOBAL(save_nvgprs)
std r0,_TRAP(r1)
blr
+
+save_user_nvgprs:
+ ld r10,TI_SIGFRAME(r12)
+ andi. r0,r9,_TIF_32BIT
+ beq- save_user_nvgprs_64
+
+ /* 32-bit save to userspace */
+
+.macro savewords start, end
+ 1: stw \start,4*(\start)(r10)
+ .section __ex_table,"a"
+ .align 3
+ .llong 1b,save_user_nvgprs_fault
+ .previous
+ .if \end - \start
+ savewords "(\start+1)",\end
+ .endif
+.endm
+ savewords 14,31
+ b save_user_nvgprs_cont
+
+save_user_nvgprs_64:
+ /* 64-bit save to userspace */
+
+.macro savelongs start, end
+ 1: std \start,8*(\start)(r10)
+ .section __ex_table,"a"
+ .align 3
+ .llong 1b,save_user_nvgprs_fault
+ .previous
+ .if \end - \start
+ savelongs "(\start+1)",\end
+ .endif
+.endm
+ savelongs 14,31
+ b save_user_nvgprs_cont
+
+save_user_nvgprs_fault:
+ li r3,11 /* SIGSEGV */
+ ld r4,TI_TASK(r12)
+ bl .force_sigsegv
+
+ clrrdi r12,r1,THREAD_SHIFT
+ ld r9,TI_FLAGS(r12)
+ b save_user_nvgprs_cont
+
/*
* The sigsuspend and rt_sigsuspend system calls can call do_signal
* and thus put the process into the stopped state where we might
@@ -260,35 +336,6 @@ _GLOBAL(save_nvgprs)
* the C code. Similarly, fork, vfork and clone need the full
* register state on the stack so that it can be copied to the child.
*/
-_GLOBAL(ppc32_sigsuspend)
- bl .save_nvgprs
- bl .compat_sys_sigsuspend
- b 70f
-
-_GLOBAL(ppc64_rt_sigsuspend)
- bl .save_nvgprs
- bl .sys_rt_sigsuspend
- b 70f
-
-_GLOBAL(ppc32_rt_sigsuspend)
- bl .save_nvgprs
- bl .compat_sys_rt_sigsuspend
-70: cmpdi 0,r3,0
- /* If it returned an error, we need to return via syscall_exit to set
- the SO bit in cr0 and potentially stop for ptrace. */
- bne syscall_exit
- /* If sigsuspend() returns zero, we are going into a signal handler. We
- may need to call audit_syscall_exit() to mark the exit from sigsuspend() */
-#ifdef CONFIG_AUDITSYSCALL
- ld r3,PACACURRENT(r13)
- ld r4,AUDITCONTEXT(r3)
- cmpdi 0,r4,0
- beq .ret_from_except /* No audit_context: Leave immediately. */
- li r4, 2 /* AUDITSC_FAILURE */
- li r5,-4 /* It's always -EINTR */
- bl .audit_syscall_exit
-#endif
- b .ret_from_except
_GLOBAL(ppc_fork)
bl .save_nvgprs
@@ -305,37 +352,6 @@ _GLOBAL(ppc_clone)
bl .sys_clone
b syscall_exit
-_GLOBAL(ppc32_swapcontext)
- bl .save_nvgprs
- bl .compat_sys_swapcontext
- b 80f
-
-_GLOBAL(ppc64_swapcontext)
- bl .save_nvgprs
- bl .sys_swapcontext
- b 80f
-
-_GLOBAL(ppc32_sigreturn)
- bl .compat_sys_sigreturn
- b 80f
-
-_GLOBAL(ppc32_rt_sigreturn)
- bl .compat_sys_rt_sigreturn
- b 80f
-
-_GLOBAL(ppc64_rt_sigreturn)
- bl .sys_rt_sigreturn
-
-80: cmpdi 0,r3,0
- blt syscall_exit
- clrrdi r4,r1,THREAD_SHIFT
- ld r4,TI_FLAGS(r4)
- andi. r4,r4,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
- beq+ 81f
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_syscall_trace_leave
-81: b .ret_from_except
-
_GLOBAL(ret_from_fork)
bl .schedule_tail
REST_NVGPRS(r1)
@@ -674,7 +690,7 @@ _GLOBAL(enter_rtas)
/* Setup our real return addr */
SET_REG_TO_LABEL(r4,.rtas_return_loc)
- SET_REG_TO_CONST(r9,KERNELBASE)
+ SET_REG_TO_CONST(r9,PAGE_OFFSET)
sub r4,r4,r9
mtlr r4
@@ -702,7 +718,7 @@ _GLOBAL(enter_rtas)
_STATIC(rtas_return_loc)
/* relocation is off at this point */
mfspr r4,SPRN_SPRG3 /* Get PACA */
- SET_REG_TO_CONST(r5, KERNELBASE)
+ SET_REG_TO_CONST(r5, PAGE_OFFSET)
sub r4,r4,r5 /* RELOC the PACA base pointer */
mfmsr r6
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index ccdf94731e30..03b25f9359f8 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -120,10 +120,25 @@ __start:
* because OF may have I/O devices mapped into that area
* (particularly on CHRP).
*/
+#ifdef CONFIG_PPC_MULTIPLATFORM
cmpwi 0,r5,0
beq 1f
bl prom_init
trap
+#endif
+
+/*
+ * Check for BootX signature when supporting PowerMac and branch to
+ * appropriate trampoline if it's present
+ */
+#ifdef CONFIG_PPC_PMAC
+1: lis r31,0x426f
+ ori r31,r31,0x6f58
+ cmpw 0,r3,r31
+ bne 1f
+ bl bootx_init
+ trap
+#endif /* CONFIG_PPC_PMAC */
1: mr r31,r3 /* save parameters */
mr r30,r4
@@ -153,6 +168,9 @@ __after_mmu_off:
bl flush_tlbs
bl initial_bats
+#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT)
+ bl setup_disp_bat
+#endif
/*
* Call setup_cpu for CPU 0 and initialize 6xx Idle
@@ -450,16 +468,11 @@ SystemCall:
* by executing an altivec instruction.
*/
. = 0xf00
- b Trap_0f
+ b PerformanceMonitor
. = 0xf20
b AltiVecUnavailable
-Trap_0f:
- EXCEPTION_PROLOG
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_EE(0xf00, unknown_exception)
-
/*
* Handle TLB miss for instruction on 603/603e.
* Note: we get an alternate set of r0 - r3 to use automatically.
@@ -703,6 +716,11 @@ AltiVecUnavailable:
#endif /* CONFIG_ALTIVEC */
EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
+PerformanceMonitor:
+ EXCEPTION_PROLOG
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_STD(0xf00, performance_monitor_exception)
+
#ifdef CONFIG_ALTIVEC
/* Note that the AltiVec support is closely modeled after the FP
* support. Changes to one are likely to be applicable to the
@@ -1306,6 +1324,32 @@ initial_bats:
blr
+#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT)
+setup_disp_bat:
+ /*
+ * setup the display bat prepared for us in prom.c
+ */
+ mflr r8
+ bl reloc_offset
+ mtlr r8
+ addis r8,r3,disp_BAT@ha
+ addi r8,r8,disp_BAT@l
+ cmpwi cr0,r8,0
+ beqlr
+ lwz r11,0(r8)
+ lwz r8,4(r8)
+ mfspr r9,SPRN_PVR
+ rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */
+ cmpwi 0,r9,1
+ beq 1f
+ mtspr SPRN_DBAT3L,r8
+ mtspr SPRN_DBAT3U,r11
+ blr
+1: mtspr SPRN_IBAT3L,r8
+ mtspr SPRN_IBAT3U,r11
+ blr
+#endif /* !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) */
+
#ifdef CONFIG_8260
/* Jump into the system reset for the rom.
* We first disable the MMU, and then jump to the ROM reset address.
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 8a8bf79ef044..1c066d125375 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -154,11 +154,15 @@ _GLOBAL(__secondary_hold)
bne 100b
#ifdef CONFIG_HMT
- b .hmt_init
+ LOADADDR(r4, .hmt_init)
+ mtctr r4
+ bctr
#else
#ifdef CONFIG_SMP
+ LOADADDR(r4, .pSeries_secondary_smp_init)
+ mtctr r4
mr r3,r24
- b .pSeries_secondary_smp_init
+ bctr
#else
BUG_OPCODE
#endif
@@ -200,6 +204,20 @@ exception_marker:
#define EX_R3 64
#define EX_LR 72
+/*
+ * We're short on space and time in the exception prolog, so we can't use
+ * the normal LOADADDR macro. Normally we just need the low halfword of the
+ * address, but for Kdump we need the whole low word.
+ */
+#ifdef CONFIG_CRASH_DUMP
+#define LOAD_HANDLER(reg, label) \
+ oris reg,reg,(label)@h; /* virt addr of handler ... */ \
+ ori reg,reg,(label)@l; /* .. and the rest */
+#else
+#define LOAD_HANDLER(reg, label) \
+ ori reg,reg,(label)@l; /* virt addr of handler ... */
+#endif
+
#define EXCEPTION_PROLOG_PSERIES(area, label) \
mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \
std r9,area+EX_R9(r13); /* save r9 - r12 */ \
@@ -212,7 +230,7 @@ exception_marker:
clrrdi r12,r13,32; /* get high part of &label */ \
mfmsr r10; \
mfspr r11,SPRN_SRR0; /* save SRR0 */ \
- ori r12,r12,(label)@l; /* virt addr of handler */ \
+ LOAD_HANDLER(r12,label) \
ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \
mtspr SPRN_SRR0,r12; \
mfspr r12,SPRN_SRR1; /* and SRR1 */ \
@@ -553,6 +571,7 @@ slb_miss_user_pseries:
* Vectors for the FWNMI option. Share common code.
*/
.globl system_reset_fwnmi
+ .align 7
system_reset_fwnmi:
HMT_MEDIUM
mtspr SPRN_SPRG1,r13 /* save r13 */
@@ -560,6 +579,7 @@ system_reset_fwnmi:
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
.globl machine_check_fwnmi
+ .align 7
machine_check_fwnmi:
HMT_MEDIUM
mtspr SPRN_SPRG1,r13 /* save r13 */
@@ -726,7 +746,8 @@ iSeries_secondary_smp_loop:
decrementer_iSeries_masked:
li r11,1
stb r11,PACALPPACA+LPPACADECRINT(r13)
- lwz r12,PACADEFAULTDECR(r13)
+ LOADBASE(r12,tb_ticks_per_jiffy)
+ lwz r12,OFF(tb_ticks_per_jiffy)(r12)
mtspr SPRN_DEC,r12
/* fall through */
@@ -1345,7 +1366,7 @@ _GLOBAL(do_stab_bolted)
* fixed address (the linker can't compute (u64)&initial_stab >>
* PAGE_SHIFT).
*/
- . = STAB0_PHYS_ADDR /* 0x6000 */
+ . = STAB0_OFFSET /* 0x6000 */
.globl initial_stab
initial_stab:
.space 4096
@@ -1485,11 +1506,13 @@ _STATIC(__mmu_off)
*
*/
_GLOBAL(__start_initialization_multiplatform)
+#ifdef CONFIG_PPC_MULTIPLATFORM
/*
* Are we booted from a PROM Of-type client-interface ?
*/
cmpldi cr0,r5,0
bne .__boot_from_prom /* yes -> prom */
+#endif
/* Save parameters */
mr r31,r3
@@ -1510,6 +1533,7 @@ _GLOBAL(__start_initialization_multiplatform)
bl .__mmu_off
b .__after_prom_start
+#ifdef CONFIG_PPC_MULTIPLATFORM
_STATIC(__boot_from_prom)
/* Save parameters */
mr r31,r3
@@ -1542,6 +1566,7 @@ _STATIC(__boot_from_prom)
bl .prom_init
/* We never return */
trap
+#endif
/*
* At this point, r3 contains the physical address we are running at,
@@ -1550,7 +1575,7 @@ _STATIC(__boot_from_prom)
_STATIC(__after_prom_start)
/*
- * We need to run with __start at physical address 0.
+ * We need to run with __start at physical address PHYSICAL_START.
* This will leave some code in the first 256B of
* real memory, which are reserved for software use.
* The remainder of the first page is loaded with the fixed
@@ -1565,7 +1590,7 @@ _STATIC(__after_prom_start)
mr r26,r3
SET_REG_TO_CONST(r27,KERNELBASE)
- li r3,0 /* target addr */
+ LOADADDR(r3, PHYSICAL_START) /* target addr */
// XXX FIXME: Use phys returned by OF (r30)
add r4,r27,r26 /* source addr */
@@ -1846,7 +1871,7 @@ _STATIC(start_here_multiplatform)
mulli r13,r27,PACA_SIZE /* Calculate vaddr of right paca */
add r13,r13,r24 /* for this processor. */
add r13,r13,r26 /* convert to physical addr */
- mtspr SPRN_SPRG3,r13 /* PPPBBB: Temp... -Peter */
+ mtspr SPRN_SPRG3,r13
/* Do very early kernel initializations, including initial hash table,
* stab and slb setup before we turn on relocation. */
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
new file mode 100644
index 000000000000..e47d40ac6f39
--- /dev/null
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -0,0 +1,396 @@
+/*
+ * IBM PowerPC IBM eBus Infrastructure Support.
+ *
+ * Copyright (c) 2005 IBM Corporation
+ * Heiko J Schick <schickhj@de.ibm.com>
+ *
+ * All rights reserved.
+ *
+ * This source code is distributed under a dual license of GPL v2.0 and OpenIB
+ * BSD.
+ *
+ * OpenIB BSD License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/kobject.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <asm/ibmebus.h>
+#include <asm/abs_addr.h>
+
+static struct ibmebus_dev ibmebus_bus_device = { /* fake "parent" device */
+ .name = ibmebus_bus_device.ofdev.dev.bus_id,
+ .ofdev.dev.bus_id = "ibmebus",
+ .ofdev.dev.bus = &ibmebus_bus_type,
+};
+
+static void *ibmebus_alloc_coherent(struct device *dev,
+ size_t size,
+ dma_addr_t *dma_handle,
+ gfp_t flag)
+{
+ void *mem;
+
+ mem = kmalloc(size, flag);
+ *dma_handle = (dma_addr_t)mem;
+
+ return mem;
+}
+
+static void ibmebus_free_coherent(struct device *dev,
+ size_t size, void *vaddr,
+ dma_addr_t dma_handle)
+{
+ kfree(vaddr);
+}
+
+static dma_addr_t ibmebus_map_single(struct device *dev,
+ void *ptr,
+ size_t size,
+ enum dma_data_direction direction)
+{
+ return (dma_addr_t)(ptr);
+}
+
+static void ibmebus_unmap_single(struct device *dev,
+ dma_addr_t dma_addr,
+ size_t size,
+ enum dma_data_direction direction)
+{
+ return;
+}
+
+static int ibmebus_map_sg(struct device *dev,
+ struct scatterlist *sg,
+ int nents, enum dma_data_direction direction)
+{
+ int i;
+
+ for (i = 0; i < nents; i++) {
+ sg[i].dma_address = (dma_addr_t)page_address(sg[i].page)
+ + sg[i].offset;
+ sg[i].dma_length = sg[i].length;
+ }
+
+ return nents;
+}
+
+static void ibmebus_unmap_sg(struct device *dev,
+ struct scatterlist *sg,
+ int nents, enum dma_data_direction direction)
+{
+ return;
+}
+
+static int ibmebus_dma_supported(struct device *dev, u64 mask)
+{
+ return 1;
+}
+
+struct dma_mapping_ops ibmebus_dma_ops = {
+ .alloc_coherent = ibmebus_alloc_coherent,
+ .free_coherent = ibmebus_free_coherent,
+ .map_single = ibmebus_map_single,
+ .unmap_single = ibmebus_unmap_single,
+ .map_sg = ibmebus_map_sg,
+ .unmap_sg = ibmebus_unmap_sg,
+ .dma_supported = ibmebus_dma_supported,
+};
+
+static int ibmebus_bus_probe(struct device *dev)
+{
+ struct ibmebus_dev *ibmebusdev = to_ibmebus_dev(dev);
+ struct ibmebus_driver *ibmebusdrv = to_ibmebus_driver(dev->driver);
+ const struct of_device_id *id;
+ int error = -ENODEV;
+
+ if (!ibmebusdrv->probe)
+ return error;
+
+ id = of_match_device(ibmebusdrv->id_table, &ibmebusdev->ofdev);
+ if (id) {
+ error = ibmebusdrv->probe(ibmebusdev, id);
+ }
+
+ return error;
+}
+
+static int ibmebus_bus_remove(struct device *dev)
+{
+ struct ibmebus_dev *ibmebusdev = to_ibmebus_dev(dev);
+ struct ibmebus_driver *ibmebusdrv = to_ibmebus_driver(dev->driver);
+
+ if (ibmebusdrv->remove) {
+ return ibmebusdrv->remove(ibmebusdev);
+ }
+
+ return 0;
+}
+
+static void __devinit ibmebus_dev_release(struct device *dev)
+{
+ of_node_put(to_ibmebus_dev(dev)->ofdev.node);
+ kfree(to_ibmebus_dev(dev));
+}
+
+static ssize_t ibmebusdev_show_name(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%s\n", to_ibmebus_dev(dev)->name);
+}
+static DEVICE_ATTR(name, S_IRUSR | S_IRGRP | S_IROTH, ibmebusdev_show_name,
+ NULL);
+
+static struct ibmebus_dev* __devinit ibmebus_register_device_common(
+ struct ibmebus_dev *dev, char *name)
+{
+ int err = 0;
+
+ dev->name = name;
+ dev->ofdev.dev.parent = &ibmebus_bus_device.ofdev.dev;
+ dev->ofdev.dev.bus = &ibmebus_bus_type;
+ dev->ofdev.dev.release = ibmebus_dev_release;
+
+ /* An ibmebusdev is based on a of_device. We have to change the
+ * bus type to use our own DMA mapping operations.
+ */
+ if ((err = of_device_register(&dev->ofdev)) != 0) {
+ printk(KERN_ERR "%s: failed to register device (%d).\n",
+ __FUNCTION__, err);
+ return NULL;
+ }
+
+ device_create_file(&dev->ofdev.dev, &dev_attr_name);
+
+ return dev;
+}
+
+static struct ibmebus_dev* __devinit ibmebus_register_device_node(
+ struct device_node *dn)
+{
+ struct ibmebus_dev *dev;
+ char *loc_code;
+ int length;
+
+ loc_code = (char *)get_property(dn, "ibm,loc-code", NULL);
+ if (!loc_code) {
+ printk(KERN_WARNING "%s: node %s missing 'ibm,loc-code'\n",
+ __FUNCTION__, dn->name ? dn->name : "<unknown>");
+ return NULL;
+ }
+
+ if (strlen(loc_code) == 0) {
+ printk(KERN_WARNING "%s: 'ibm,loc-code' is invalid\n",
+ __FUNCTION__);
+ return NULL;
+ }
+
+ dev = kmalloc(sizeof(struct ibmebus_dev), GFP_KERNEL);
+ if (!dev) {
+ return NULL;
+ }
+ memset(dev, 0, sizeof(struct ibmebus_dev));
+
+ dev->ofdev.node = of_node_get(dn);
+
+ length = strlen(loc_code);
+ memcpy(dev->ofdev.dev.bus_id, loc_code
+ + (length - min(length, BUS_ID_SIZE - 1)),
+ min(length, BUS_ID_SIZE - 1));
+
+ /* Register with generic device framework. */
+ if (ibmebus_register_device_common(dev, dn->name) == NULL) {
+ kfree(dev);
+ return NULL;
+ }
+
+ return dev;
+}
+
+static void ibmebus_probe_of_nodes(char* name)
+{
+ struct device_node *dn = NULL;
+
+ while ((dn = of_find_node_by_name(dn, name))) {
+ if (ibmebus_register_device_node(dn) == NULL) {
+ of_node_put(dn);
+
+ return;
+ }
+ }
+
+ of_node_put(dn);
+
+ return;
+}
+
+static void ibmebus_add_devices_by_id(struct of_device_id *idt)
+{
+ while (strlen(idt->name) > 0) {
+ ibmebus_probe_of_nodes(idt->name);
+ idt++;
+ }
+
+ return;
+}
+
+static int ibmebus_match_helper(struct device *dev, void *data)
+{
+ if (strcmp((char*)data, to_ibmebus_dev(dev)->name) == 0)
+ return 1;
+
+ return 0;
+}
+
+static int ibmebus_unregister_device(struct device *dev)
+{
+ device_remove_file(dev, &dev_attr_name);
+ of_device_unregister(to_of_device(dev));
+
+ return 0;
+}
+
+static void ibmebus_remove_devices_by_id(struct of_device_id *idt)
+{
+ struct device *dev;
+
+ while (strlen(idt->name) > 0) {
+ while ((dev = bus_find_device(&ibmebus_bus_type, NULL,
+ (void*)idt->name,
+ ibmebus_match_helper))) {
+ ibmebus_unregister_device(dev);
+ }
+ idt++;
+
+ }
+
+ return;
+}
+
+int ibmebus_register_driver(struct ibmebus_driver *drv)
+{
+ int err = 0;
+
+ drv->driver.name = drv->name;
+ drv->driver.bus = &ibmebus_bus_type;
+ drv->driver.probe = ibmebus_bus_probe;
+ drv->driver.remove = ibmebus_bus_remove;
+
+ if ((err = driver_register(&drv->driver) != 0))
+ return err;
+
+ ibmebus_add_devices_by_id(drv->id_table);
+
+ return 0;
+}
+EXPORT_SYMBOL(ibmebus_register_driver);
+
+void ibmebus_unregister_driver(struct ibmebus_driver *drv)
+{
+ driver_unregister(&drv->driver);
+ ibmebus_remove_devices_by_id(drv->id_table);
+}
+EXPORT_SYMBOL(ibmebus_unregister_driver);
+
+int ibmebus_request_irq(struct ibmebus_dev *dev,
+ u32 ist,
+ irqreturn_t (*handler)(int, void*, struct pt_regs *),
+ unsigned long irq_flags, const char * devname,
+ void *dev_id)
+{
+ unsigned int irq = virt_irq_create_mapping(ist);
+
+ if (irq == NO_IRQ)
+ return -EINVAL;
+
+ irq = irq_offset_up(irq);
+
+ return request_irq(irq, handler,
+ irq_flags, devname, dev_id);
+}
+EXPORT_SYMBOL(ibmebus_request_irq);
+
+void ibmebus_free_irq(struct ibmebus_dev *dev, u32 ist, void *dev_id)
+{
+ unsigned int irq = virt_irq_create_mapping(ist);
+
+ irq = irq_offset_up(irq);
+ free_irq(irq, dev_id);
+
+ return;
+}
+EXPORT_SYMBOL(ibmebus_free_irq);
+
+static int ibmebus_bus_match(struct device *dev, struct device_driver *drv)
+{
+ const struct ibmebus_dev *ebus_dev = to_ibmebus_dev(dev);
+ struct ibmebus_driver *ebus_drv = to_ibmebus_driver(drv);
+ const struct of_device_id *ids = ebus_drv->id_table;
+ const struct of_device_id *found_id;
+
+ if (!ids)
+ return 0;
+
+ found_id = of_match_device(ids, &ebus_dev->ofdev);
+ if (found_id)
+ return 1;
+
+ return 0;
+}
+
+struct bus_type ibmebus_bus_type = {
+ .name = "ibmebus",
+ .match = ibmebus_bus_match,
+};
+EXPORT_SYMBOL(ibmebus_bus_type);
+
+static int __init ibmebus_bus_init(void)
+{
+ int err;
+
+ printk(KERN_INFO "IBM eBus Device Driver\n");
+
+ err = bus_register(&ibmebus_bus_type);
+ if (err) {
+ printk(KERN_ERR ":%s: failed to register IBM eBus.\n",
+ __FUNCTION__);
+ return err;
+ }
+
+ err = device_register(&ibmebus_bus_device.ofdev.dev);
+ if (err) {
+ printk(KERN_WARNING "%s: device_register returned %i\n",
+ __FUNCTION__, err);
+ bus_unregister(&ibmebus_bus_type);
+
+ return err;
+ }
+
+ return 0;
+}
+__initcall(ibmebus_bus_init);
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 5a71ed9612fe..5651032d8706 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -31,7 +31,6 @@
* to reduce code space and undefined function references.
*/
-#include <linux/errno.h>
#include <linux/module.h>
#include <linux/threads.h>
#include <linux/kernel_stat.h>
@@ -44,18 +43,12 @@
#include <linux/config.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/irq.h>
-#include <linux/proc_fs.h>
-#include <linux/random.h>
#include <linux/seq_file.h>
#include <linux/cpumask.h>
#include <linux/profile.h>
#include <linux/bitops.h>
-#ifdef CONFIG_PPC64
-#include <linux/kallsyms.h>
-#endif
#include <asm/uaccess.h>
#include <asm/system.h>
@@ -66,8 +59,7 @@
#include <asm/prom.h>
#include <asm/ptrace.h>
#include <asm/machdep.h>
-#ifdef CONFIG_PPC64
-#include <asm/iseries/it_lp_queue.h>
+#ifdef CONFIG_PPC_ISERIES
#include <asm/paca.h>
#endif
@@ -78,10 +70,6 @@ EXPORT_SYMBOL(__irq_offset_value);
static int ppc_spurious_interrupts;
-#if defined(CONFIG_PPC_ISERIES) && defined(CONFIG_SMP)
-extern void iSeries_smp_message_recv(struct pt_regs *);
-#endif
-
#ifdef CONFIG_PPC32
#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
@@ -195,49 +183,6 @@ void fixup_irqs(cpumask_t map)
}
#endif
-#ifdef CONFIG_PPC_ISERIES
-void do_IRQ(struct pt_regs *regs)
-{
- struct paca_struct *lpaca;
-
- irq_enter();
-
-#ifdef CONFIG_DEBUG_STACKOVERFLOW
- /* Debugging check for stack overflow: is there less than 2KB free? */
- {
- long sp;
-
- sp = __get_SP() & (THREAD_SIZE-1);
-
- if (unlikely(sp < (sizeof(struct thread_info) + 2048))) {
- printk("do_IRQ: stack overflow: %ld\n",
- sp - sizeof(struct thread_info));
- dump_stack();
- }
- }
-#endif
-
- lpaca = get_paca();
-#ifdef CONFIG_SMP
- if (lpaca->lppaca.int_dword.fields.ipi_cnt) {
- lpaca->lppaca.int_dword.fields.ipi_cnt = 0;
- iSeries_smp_message_recv(regs);
- }
-#endif /* CONFIG_SMP */
- if (hvlpevent_is_pending())
- process_hvlpevents(regs);
-
- irq_exit();
-
- if (lpaca->lppaca.int_dword.fields.decr_int) {
- lpaca->lppaca.int_dword.fields.decr_int = 0;
- /* Signal a fake decrementer interrupt */
- timer_interrupt(regs);
- }
-}
-
-#else /* CONFIG_PPC_ISERIES */
-
void do_IRQ(struct pt_regs *regs)
{
int irq;
@@ -286,16 +231,24 @@ void do_IRQ(struct pt_regs *regs)
} else
#endif
__do_IRQ(irq, regs);
- } else
-#ifdef CONFIG_PPC32
- if (irq != -2)
-#endif
- /* That's not SMP safe ... but who cares ? */
- ppc_spurious_interrupts++;
+ } else if (irq != -2)
+ /* That's not SMP safe ... but who cares ? */
+ ppc_spurious_interrupts++;
+
irq_exit();
-}
-#endif /* CONFIG_PPC_ISERIES */
+#ifdef CONFIG_PPC_ISERIES
+ {
+ struct paca_struct *lpaca = get_paca();
+
+ if (lpaca->lppaca.int_dword.fields.decr_int) {
+ lpaca->lppaca.int_dword.fields.decr_int = 0;
+ /* Signal a fake decrementer interrupt */
+ timer_interrupt(regs);
+ }
+ }
+#endif
+}
void __init init_IRQ(void)
{
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
new file mode 100644
index 000000000000..f970ace208d3
--- /dev/null
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -0,0 +1,557 @@
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/console.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <asm/prom.h>
+#include <asm/serial.h>
+#include <asm/udbg.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt...) do { printk(fmt); } while(0)
+#else
+#define DBG(fmt...) do { } while(0)
+#endif
+
+#define MAX_LEGACY_SERIAL_PORTS 8
+
+static struct plat_serial8250_port
+legacy_serial_ports[MAX_LEGACY_SERIAL_PORTS+1];
+static struct legacy_serial_info {
+ struct device_node *np;
+ unsigned int speed;
+ unsigned int clock;
+ phys_addr_t taddr;
+} legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
+static unsigned int legacy_serial_count;
+static int legacy_serial_console = -1;
+
+static int __init add_legacy_port(struct device_node *np, int want_index,
+ int iotype, phys_addr_t base,
+ phys_addr_t taddr, unsigned long irq,
+ unsigned int flags)
+{
+ u32 *clk, *spd, clock = BASE_BAUD * 16;
+ int index;
+
+ /* get clock freq. if present */
+ clk = (u32 *)get_property(np, "clock-frequency", NULL);
+ if (clk && *clk)
+ clock = *clk;
+
+ /* get default speed if present */
+ spd = (u32 *)get_property(np, "current-speed", NULL);
+
+ /* If we have a location index, then try to use it */
+ if (want_index >= 0 && want_index < MAX_LEGACY_SERIAL_PORTS)
+ index = want_index;
+ else
+ index = legacy_serial_count;
+
+ /* if our index is still out of range, that mean that
+ * array is full, we could scan for a free slot but that
+ * make little sense to bother, just skip the port
+ */
+ if (index >= MAX_LEGACY_SERIAL_PORTS)
+ return -1;
+ if (index >= legacy_serial_count)
+ legacy_serial_count = index + 1;
+
+ /* Check if there is a port who already claimed our slot */
+ if (legacy_serial_infos[index].np != 0) {
+ /* if we still have some room, move it, else override */
+ if (legacy_serial_count < MAX_LEGACY_SERIAL_PORTS) {
+ printk(KERN_INFO "Moved legacy port %d -> %d\n",
+ index, legacy_serial_count);
+ legacy_serial_ports[legacy_serial_count] =
+ legacy_serial_ports[index];
+ legacy_serial_infos[legacy_serial_count] =
+ legacy_serial_infos[index];
+ legacy_serial_count++;
+ } else {
+ printk(KERN_INFO "Replacing legacy port %d\n", index);
+ }
+ }
+
+ /* Now fill the entry */
+ memset(&legacy_serial_ports[index], 0,
+ sizeof(struct plat_serial8250_port));
+ if (iotype == UPIO_PORT)
+ legacy_serial_ports[index].iobase = base;
+ else
+ legacy_serial_ports[index].mapbase = base;
+ legacy_serial_ports[index].iotype = iotype;
+ legacy_serial_ports[index].uartclk = clock;
+ legacy_serial_ports[index].irq = irq;
+ legacy_serial_ports[index].flags = flags;
+ legacy_serial_infos[index].taddr = taddr;
+ legacy_serial_infos[index].np = of_node_get(np);
+ legacy_serial_infos[index].clock = clock;
+ legacy_serial_infos[index].speed = spd ? *spd : 0;
+
+ printk(KERN_INFO "Found legacy serial port %d for %s\n",
+ index, np->full_name);
+ printk(KERN_INFO " %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n",
+ (iotype == UPIO_PORT) ? "port" : "mem",
+ (unsigned long long)base, (unsigned long long)taddr, irq,
+ legacy_serial_ports[index].uartclk,
+ legacy_serial_infos[index].speed);
+
+ return index;
+}
+
+static int __init add_legacy_soc_port(struct device_node *np,
+ struct device_node *soc_dev)
+{
+ phys_addr_t addr;
+ u32 *addrp;
+ unsigned int flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+
+ /* We only support ports that have a clock frequency properly
+ * encoded in the device-tree.
+ */
+ if (get_property(np, "clock-frequency", NULL) == NULL)
+ return -1;
+
+ /* Get the address */
+ addrp = of_get_address(soc_dev, 0, NULL, NULL);
+ if (addrp == NULL)
+ return -1;
+
+ addr = of_translate_address(soc_dev, addrp);
+
+ /* Add port, irq will be dealt with later. We passed a translated
+ * IO port value. It will be fixed up later along with the irq
+ */
+ return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags);
+}
+
+#ifdef CONFIG_ISA
+static int __init add_legacy_isa_port(struct device_node *np,
+ struct device_node *isa_brg)
+{
+ u32 *reg;
+ char *typep;
+ int index = -1;
+ phys_addr_t taddr;
+
+ /* Get the ISA port number */
+ reg = (u32 *)get_property(np, "reg", NULL);
+ if (reg == NULL)
+ return -1;
+
+ /* Verify it's an IO port, we don't support anything else */
+ if (!(reg[0] & 0x00000001))
+ return -1;
+
+ /* Now look for an "ibm,aix-loc" property that gives us ordering
+ * if any...
+ */
+ typep = (char *)get_property(np, "ibm,aix-loc", NULL);
+
+ /* If we have a location index, then use it */
+ if (typep && *typep == 'S')
+ index = simple_strtol(typep+1, NULL, 0) - 1;
+
+ /* Translate ISA address */
+ taddr = of_translate_address(np, reg);
+
+ /* Add port, irq will be dealt with later */
+ return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr, NO_IRQ, UPF_BOOT_AUTOCONF);
+
+}
+#endif
+
+#ifdef CONFIG_PCI
+static int __init add_legacy_pci_port(struct device_node *np,
+ struct device_node *pci_dev)
+{
+ phys_addr_t addr, base;
+ u32 *addrp;
+ unsigned int flags;
+ int iotype, index = -1, lindex = 0;
+
+ /* We only support ports that have a clock frequency properly
+ * encoded in the device-tree (that is have an fcode). Anything
+ * else can't be used that early and will be normally probed by
+ * the generic 8250_pci driver later on. The reason is that 8250
+ * compatible UARTs on PCI need all sort of quirks (port offsets
+ * etc...) that this code doesn't know about
+ */
+ if (get_property(np, "clock-frequency", NULL) == NULL)
+ return -1;
+
+ /* Get the PCI address. Assume BAR 0 */
+ addrp = of_get_pci_address(pci_dev, 0, NULL, &flags);
+ if (addrp == NULL)
+ return -1;
+
+ /* We only support BAR 0 for now */
+ iotype = (flags & IORESOURCE_MEM) ? UPIO_MEM : UPIO_PORT;
+ addr = of_translate_address(pci_dev, addrp);
+
+ /* Set the IO base to the same as the translated address for MMIO,
+ * or to the domain local IO base for PIO (it will be fixed up later)
+ */
+ if (iotype == UPIO_MEM)
+ base = addr;
+ else
+ base = addrp[2];
+
+ /* Try to guess an index... If we have subdevices of the pci dev,
+ * we get to their "reg" property
+ */
+ if (np != pci_dev) {
+ u32 *reg = (u32 *)get_property(np, "reg", NULL);
+ if (reg && (*reg < 4))
+ index = lindex = *reg;
+ }
+
+ /* Local index means it's the Nth port in the PCI chip. Unfortunately
+ * the offset to add here is device specific. We know about those
+ * EXAR ports and we default to the most common case. If your UART
+ * doesn't work for these settings, you'll have to add your own special
+ * cases here
+ */
+ if (device_is_compatible(pci_dev, "pci13a8,152") ||
+ device_is_compatible(pci_dev, "pci13a8,154") ||
+ device_is_compatible(pci_dev, "pci13a8,158")) {
+ addr += 0x200 * lindex;
+ base += 0x200 * lindex;
+ } else {
+ addr += 8 * lindex;
+ base += 8 * lindex;
+ }
+
+ /* Add port, irq will be dealt with later. We passed a translated
+ * IO port value. It will be fixed up later along with the irq
+ */
+ return add_legacy_port(np, index, iotype, base, addr, NO_IRQ, UPF_BOOT_AUTOCONF);
+}
+#endif
+
+/*
+ * This is called very early, as part of setup_system() or eventually
+ * setup_arch(), basically before anything else in this file. This function
+ * will try to build a list of all the available 8250-compatible serial ports
+ * in the machine using the Open Firmware device-tree. It currently only deals
+ * with ISA and PCI busses but could be extended. It allows a very early boot
+ * console to be initialized, that list is also used later to provide 8250 with
+ * the machine non-PCI ports and to properly pick the default console port
+ */
+void __init find_legacy_serial_ports(void)
+{
+ struct device_node *np, *stdout = NULL;
+ char *path;
+ int index;
+
+ DBG(" -> find_legacy_serial_port()\n");
+
+ /* Now find out if one of these is out firmware console */
+ path = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
+ if (path != NULL) {
+ stdout = of_find_node_by_path(path);
+ if (stdout)
+ DBG("stdout is %s\n", stdout->full_name);
+ } else {
+ DBG(" no linux,stdout-path !\n");
+ }
+
+ /* First fill our array with SOC ports */
+ for (np = NULL; (np = of_find_compatible_node(np, "serial", "ns16550")) != NULL;) {
+ struct device_node *soc = of_get_parent(np);
+ if (soc && !strcmp(soc->type, "soc")) {
+ index = add_legacy_soc_port(np, np);
+ if (index >= 0 && np == stdout)
+ legacy_serial_console = index;
+ }
+ of_node_put(soc);
+ }
+
+#ifdef CONFIG_ISA
+ /* First fill our array with ISA ports */
+ for (np = NULL; (np = of_find_node_by_type(np, "serial"));) {
+ struct device_node *isa = of_get_parent(np);
+ if (isa && !strcmp(isa->name, "isa")) {
+ index = add_legacy_isa_port(np, isa);
+ if (index >= 0 && np == stdout)
+ legacy_serial_console = index;
+ }
+ of_node_put(isa);
+ }
+#endif
+
+#ifdef CONFIG_PCI
+ /* Next, try to locate PCI ports */
+ for (np = NULL; (np = of_find_all_nodes(np));) {
+ struct device_node *pci, *parent = of_get_parent(np);
+ if (parent && !strcmp(parent->name, "isa")) {
+ of_node_put(parent);
+ continue;
+ }
+ if (strcmp(np->name, "serial") && strcmp(np->type, "serial")) {
+ of_node_put(parent);
+ continue;
+ }
+ /* Check for known pciclass, and also check wether we have
+ * a device with child nodes for ports or not
+ */
+ if (device_is_compatible(np, "pciclass,0700") ||
+ device_is_compatible(np, "pciclass,070002"))
+ pci = np;
+ else if (device_is_compatible(parent, "pciclass,0700") ||
+ device_is_compatible(parent, "pciclass,070002"))
+ pci = parent;
+ else {
+ of_node_put(parent);
+ continue;
+ }
+ index = add_legacy_pci_port(np, pci);
+ if (index >= 0 && np == stdout)
+ legacy_serial_console = index;
+ of_node_put(parent);
+ }
+#endif
+
+ DBG("legacy_serial_console = %d\n", legacy_serial_console);
+
+ /* udbg is 64 bits only for now, that will change soon though ... */
+ while (legacy_serial_console >= 0) {
+ struct legacy_serial_info *info =
+ &legacy_serial_infos[legacy_serial_console];
+ void __iomem *addr;
+
+ if (info->taddr == 0)
+ break;
+ addr = ioremap(info->taddr, 0x1000);
+ if (addr == NULL)
+ break;
+ if (info->speed == 0)
+ info->speed = udbg_probe_uart_speed(addr, info->clock);
+ DBG("default console speed = %d\n", info->speed);
+ udbg_init_uart(addr, info->speed, info->clock);
+ break;
+ }
+
+ DBG(" <- find_legacy_serial_port()\n");
+}
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = legacy_serial_ports,
+ },
+};
+
+static void __init fixup_port_irq(int index,
+ struct device_node *np,
+ struct plat_serial8250_port *port)
+{
+ DBG("fixup_port_irq(%d)\n", index);
+
+ /* Check for interrupts in that node */
+ if (np->n_intrs > 0) {
+ port->irq = np->intrs[0].line;
+ DBG(" port %d (%s), irq=%d\n",
+ index, np->full_name, port->irq);
+ return;
+ }
+
+ /* Check for interrupts in the parent */
+ np = of_get_parent(np);
+ if (np == NULL)
+ return;
+
+ if (np->n_intrs > 0) {
+ port->irq = np->intrs[0].line;
+ DBG(" port %d (%s), irq=%d\n",
+ index, np->full_name, port->irq);
+ }
+ of_node_put(np);
+}
+
+static void __init fixup_port_pio(int index,
+ struct device_node *np,
+ struct plat_serial8250_port *port)
+{
+#ifdef CONFIG_PCI
+ struct pci_controller *hose;
+
+ DBG("fixup_port_pio(%d)\n", index);
+
+ hose = pci_find_hose_for_OF_device(np);
+ if (hose) {
+ unsigned long offset = (unsigned long)hose->io_base_virt -
+#ifdef CONFIG_PPC64
+ pci_io_base;
+#else
+ isa_io_base;
+#endif
+ DBG("port %d, IO %lx -> %lx\n",
+ index, port->iobase, port->iobase + offset);
+ port->iobase += offset;
+ }
+#endif
+}
+
+static void __init fixup_port_mmio(int index,
+ struct device_node *np,
+ struct plat_serial8250_port *port)
+{
+ DBG("fixup_port_mmio(%d)\n", index);
+
+ port->membase = ioremap(port->mapbase, 0x100);
+}
+
+/*
+ * This is called as an arch initcall, hopefully before the PCI bus is
+ * probed and/or the 8250 driver loaded since we need to register our
+ * platform devices before 8250 PCI ones are detected as some of them
+ * must properly "override" the platform ones.
+ *
+ * This function fixes up the interrupt value for platform ports as it
+ * couldn't be done earlier before interrupt maps have been parsed. It
+ * also "corrects" the IO address for PIO ports for the same reason,
+ * since earlier, the PHBs virtual IO space wasn't assigned yet. It then
+ * registers all those platform ports for use by the 8250 driver when it
+ * finally loads.
+ */
+static int __init serial_dev_init(void)
+{
+ int i;
+
+ if (legacy_serial_count == 0)
+ return -ENODEV;
+
+ /*
+ * Before we register the platfrom serial devices, we need
+ * to fixup their interrutps and their IO ports.
+ */
+ DBG("Fixing serial ports interrupts and IO ports ...\n");
+
+ for (i = 0; i < legacy_serial_count; i++) {
+ struct plat_serial8250_port *port = &legacy_serial_ports[i];
+ struct device_node *np = legacy_serial_infos[i].np;
+
+ if (port->irq == NO_IRQ)
+ fixup_port_irq(i, np, port);
+ if (port->iotype == UPIO_PORT)
+ fixup_port_pio(i, np, port);
+ if (port->iotype == UPIO_MEM)
+ fixup_port_mmio(i, np, port);
+ }
+
+ DBG("Registering platform serial ports\n");
+
+ return platform_device_register(&serial_device);
+}
+arch_initcall(serial_dev_init);
+
+
+/*
+ * This is called very early, as part of console_init() (typically just after
+ * time_init()). This function is respondible for trying to find a good
+ * default console on serial ports. It tries to match the open firmware
+ * default output with one of the available serial console drivers, either
+ * one of the platform serial ports that have been probed earlier by
+ * find_legacy_serial_ports() or some more platform specific ones.
+ */
+static int __init check_legacy_serial_console(void)
+{
+ struct device_node *prom_stdout = NULL;
+ int speed = 0, offset = 0;
+ char *name;
+ u32 *spd;
+
+ DBG(" -> check_legacy_serial_console()\n");
+
+ /* The user has requested a console so this is already set up. */
+ if (strstr(saved_command_line, "console=")) {
+ DBG(" console was specified !\n");
+ return -EBUSY;
+ }
+
+ if (!of_chosen) {
+ DBG(" of_chosen is NULL !\n");
+ return -ENODEV;
+ }
+
+ if (legacy_serial_console < 0) {
+ DBG(" legacy_serial_console not found !\n");
+ return -ENODEV;
+ }
+ /* We are getting a weird phandle from OF ... */
+ /* ... So use the full path instead */
+ name = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
+ if (name == NULL) {
+ DBG(" no linux,stdout-path !\n");
+ return -ENODEV;
+ }
+ prom_stdout = of_find_node_by_path(name);
+ if (!prom_stdout) {
+ DBG(" can't find stdout package %s !\n", name);
+ return -ENODEV;
+ }
+ DBG("stdout is %s\n", prom_stdout->full_name);
+
+ name = (char *)get_property(prom_stdout, "name", NULL);
+ if (!name) {
+ DBG(" stdout package has no name !\n");
+ goto not_found;
+ }
+ spd = (u32 *)get_property(prom_stdout, "current-speed", NULL);
+ if (spd)
+ speed = *spd;
+
+ if (0)
+ ;
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ else if (strcmp(name, "serial") == 0) {
+ int i;
+ /* Look for it in probed array */
+ for (i = 0; i < legacy_serial_count; i++) {
+ if (prom_stdout != legacy_serial_infos[i].np)
+ continue;
+ offset = i;
+ speed = legacy_serial_infos[i].speed;
+ break;
+ }
+ if (i >= legacy_serial_count)
+ goto not_found;
+ }
+#endif /* CONFIG_SERIAL_8250_CONSOLE */
+#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
+ else if (strcmp(name, "ch-a") == 0)
+ offset = 0;
+ else if (strcmp(name, "ch-b") == 0)
+ offset = 1;
+#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
+ else
+ goto not_found;
+ of_node_put(prom_stdout);
+
+ DBG("Found serial console at ttyS%d\n", offset);
+
+ if (speed) {
+ static char __initdata opt[16];
+ sprintf(opt, "%d", speed);
+ return add_preferred_console("ttyS", offset, opt);
+ } else
+ return add_preferred_console("ttyS", offset, NULL);
+
+ not_found:
+ DBG("No preferred console found !\n");
+ of_node_put(prom_stdout);
+ return -ENODEV;
+}
+console_initcall(check_legacy_serial_console);
+
diff --git a/arch/powerpc/kernel/lparmap.c b/arch/powerpc/kernel/lparmap.c
index 5a05a797485f..584d1e3c013d 100644
--- a/arch/powerpc/kernel/lparmap.c
+++ b/arch/powerpc/kernel/lparmap.c
@@ -7,7 +7,7 @@
* 2 of the License, or (at your option) any later version.
*/
#include <asm/mmu.h>
-#include <asm/page.h>
+#include <asm/pgtable.h>
#include <asm/iseries/lpar_map.h>
const struct LparMap __attribute__((__section__(".text"))) xLparMap = {
@@ -16,16 +16,16 @@ const struct LparMap __attribute__((__section__(".text"))) xLparMap = {
.xSegmentTableOffs = STAB0_PAGE,
.xEsids = {
- { .xKernelEsid = GET_ESID(KERNELBASE),
- .xKernelVsid = KERNEL_VSID(KERNELBASE), },
- { .xKernelEsid = GET_ESID(VMALLOCBASE),
- .xKernelVsid = KERNEL_VSID(VMALLOCBASE), },
+ { .xKernelEsid = GET_ESID(PAGE_OFFSET),
+ .xKernelVsid = KERNEL_VSID(PAGE_OFFSET), },
+ { .xKernelEsid = GET_ESID(VMALLOC_START),
+ .xKernelVsid = KERNEL_VSID(VMALLOC_START), },
},
.xRanges = {
{ .xPages = HvPagesToMap,
.xOffset = 0,
- .xVPN = KERNEL_VSID(KERNELBASE) << (SID_SHIFT - HW_PAGE_SHIFT),
+ .xVPN = KERNEL_VSID(PAGE_OFFSET) << (SID_SHIFT - HW_PAGE_SHIFT),
},
},
};
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
new file mode 100644
index 000000000000..a91e40c9ae45
--- /dev/null
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -0,0 +1,67 @@
+/*
+ * Code to handle transition of Linux booting another kernel.
+ *
+ * Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com>
+ * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz
+ * Copyright (C) 2005 IBM Corporation.
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#include <linux/kexec.h>
+#include <linux/reboot.h>
+#include <linux/threads.h>
+#include <asm/machdep.h>
+
+/*
+ * Provide a dummy crash_notes definition until crash dump is implemented.
+ * This prevents breakage of crash_notes attribute in kernel/ksysfs.c.
+ */
+note_buf_t crash_notes[NR_CPUS];
+
+void machine_crash_shutdown(struct pt_regs *regs)
+{
+ if (ppc_md.machine_crash_shutdown)
+ ppc_md.machine_crash_shutdown(regs);
+}
+
+/*
+ * Do what every setup is needed on image and the
+ * reboot code buffer to allow us to avoid allocations
+ * later.
+ */
+int machine_kexec_prepare(struct kimage *image)
+{
+ if (ppc_md.machine_kexec_prepare)
+ return ppc_md.machine_kexec_prepare(image);
+ /*
+ * Fail if platform doesn't provide its own machine_kexec_prepare
+ * implementation.
+ */
+ return -ENOSYS;
+}
+
+void machine_kexec_cleanup(struct kimage *image)
+{
+ if (ppc_md.machine_kexec_cleanup)
+ ppc_md.machine_kexec_cleanup(image);
+}
+
+/*
+ * Do not allocate memory (or fail in any way) in machine_kexec().
+ * We are past the point of no return, committed to rebooting now.
+ */
+NORET_TYPE void machine_kexec(struct kimage *image)
+{
+ if (ppc_md.machine_kexec)
+ ppc_md.machine_kexec(image);
+ else {
+ /*
+ * Fall back to normal restart if platform doesn't provide
+ * its own kexec function, and user insist to kexec...
+ */
+ machine_restart(NULL);
+ }
+ for(;;);
+}
diff --git a/arch/powerpc/kernel/machine_kexec_32.c b/arch/powerpc/kernel/machine_kexec_32.c
new file mode 100644
index 000000000000..443606134dff
--- /dev/null
+++ b/arch/powerpc/kernel/machine_kexec_32.c
@@ -0,0 +1,65 @@
+/*
+ * PPC32 code to handle Linux booting another kernel.
+ *
+ * Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com>
+ * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz
+ * Copyright (C) 2005 IBM Corporation.
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#include <linux/kexec.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <asm/cacheflush.h>
+#include <asm/hw_irq.h>
+#include <asm/io.h>
+
+typedef NORET_TYPE void (*relocate_new_kernel_t)(
+ unsigned long indirection_page,
+ unsigned long reboot_code_buffer,
+ unsigned long start_address) ATTRIB_NORET;
+
+/*
+ * This is a generic machine_kexec function suitable at least for
+ * non-OpenFirmware embedded platforms.
+ * It merely copies the image relocation code to the control page and
+ * jumps to it.
+ * A platform specific function may just call this one.
+ */
+void default_machine_kexec(struct kimage *image)
+{
+ const extern unsigned char relocate_new_kernel[];
+ const extern unsigned int relocate_new_kernel_size;
+ unsigned long page_list;
+ unsigned long reboot_code_buffer, reboot_code_buffer_phys;
+ relocate_new_kernel_t rnk;
+
+ /* Interrupts aren't acceptable while we reboot */
+ local_irq_disable();
+
+ page_list = image->head;
+
+ /* we need both effective and real address here */
+ reboot_code_buffer =
+ (unsigned long)page_address(image->control_code_page);
+ reboot_code_buffer_phys = virt_to_phys((void *)reboot_code_buffer);
+
+ /* copy our kernel relocation code to the control code page */
+ memcpy((void *)reboot_code_buffer, relocate_new_kernel,
+ relocate_new_kernel_size);
+
+ flush_icache_range(reboot_code_buffer,
+ reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE);
+ printk(KERN_INFO "Bye!\n");
+
+ /* now call it */
+ rnk = (relocate_new_kernel_t) reboot_code_buffer;
+ (*rnk)(page_list, reboot_code_buffer_phys, image->start);
+}
+
+int default_machine_kexec_prepare(struct kimage *image)
+{
+ return 0;
+}
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 97c51e452be7..d6431440c54f 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -1,5 +1,5 @@
/*
- * machine_kexec.c - handle transition of Linux booting another kernel
+ * PPC64 code to handle Linux booting another kernel.
*
* Copyright (C) 2004-2005, IBM Corp.
*
@@ -28,21 +28,7 @@
#define HASH_GROUP_SIZE 0x80 /* size of each hash group, asm/mmu.h */
-/* Have this around till we move it into crash specific file */
-note_buf_t crash_notes[NR_CPUS];
-
-/* Dummy for now. Not sure if we need to have a crash shutdown in here
- * and if what it will achieve. Letting it be now to compile the code
- * in generic kexec environment
- */
-void machine_crash_shutdown(struct pt_regs *regs)
-{
- /* do nothing right now */
- /* smp_relase_cpus() if we want smp on panic kernel */
- /* cpu_irq_down to isolate us until we are ready */
-}
-
-int machine_kexec_prepare(struct kimage *image)
+int default_machine_kexec_prepare(struct kimage *image)
{
int i;
unsigned long begin, end; /* limits of segment */
@@ -111,11 +97,6 @@ int machine_kexec_prepare(struct kimage *image)
return 0;
}
-void machine_kexec_cleanup(struct kimage *image)
-{
- /* we do nothing in prepare that needs to be undone */
-}
-
#define IND_FLAGS (IND_DESTINATION | IND_INDIRECTION | IND_DONE | IND_SOURCE)
static void copy_segments(unsigned long ind)
@@ -172,9 +153,8 @@ void kexec_copy_flush(struct kimage *image)
* including ones that were in place on the original copy
*/
for (i = 0; i < nr_segments; i++)
- flush_icache_range(ranges[i].mem + KERNELBASE,
- ranges[i].mem + KERNELBASE +
- ranges[i].memsz);
+ flush_icache_range((unsigned long)__va(ranges[i].mem),
+ (unsigned long)__va(ranges[i].mem + ranges[i].memsz));
}
#ifdef CONFIG_SMP
@@ -283,13 +263,20 @@ extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start,
void (*clear_all)(void)) ATTRIB_NORET;
/* too late to fail here */
-void machine_kexec(struct kimage *image)
+void default_machine_kexec(struct kimage *image)
{
-
/* prepare control code if any */
- /* shutdown other cpus into our wait loop and quiesce interrupts */
- kexec_prepare_cpus();
+ /*
+ * If the kexec boot is the normal one, need to shutdown other cpus
+ * into our wait loop and quiesce interrupts.
+ * Otherwise, in the case of crashed mode (crashing_cpu >= 0),
+ * stopping other CPUs and collecting their pt_regs is done before
+ * using debugger IPI.
+ */
+
+ if (crashing_cpu == -1)
+ kexec_prepare_cpus();
/* switch to a staticly allocated stack. Based on irq stack code.
* XXX: the task struct will likely be invalid once we do the copy!
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 624a983a9676..01d0d97a16e1 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -5,6 +5,10 @@
* Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
* and Paul Mackerras.
*
+ * kexec bits:
+ * Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com>
+ * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
@@ -24,6 +28,8 @@
#include <asm/ppc_asm.h>
#include <asm/thread_info.h>
#include <asm/asm-offsets.h>
+#include <asm/processor.h>
+#include <asm/kexec.h>
.text
@@ -1006,3 +1012,110 @@ _GLOBAL(execve)
*/
_GLOBAL(__main)
blr
+
+#ifdef CONFIG_KEXEC
+ /*
+ * Must be relocatable PIC code callable as a C function.
+ */
+ .globl relocate_new_kernel
+relocate_new_kernel:
+ /* r3 = page_list */
+ /* r4 = reboot_code_buffer */
+ /* r5 = start_address */
+
+ li r0, 0
+
+ /*
+ * Set Machine Status Register to a known status,
+ * switch the MMU off and jump to 1: in a single step.
+ */
+
+ mr r8, r0
+ ori r8, r8, MSR_RI|MSR_ME
+ mtspr SPRN_SRR1, r8
+ addi r8, r4, 1f - relocate_new_kernel
+ mtspr SPRN_SRR0, r8
+ sync
+ rfi
+
+1:
+ /* from this point address translation is turned off */
+ /* and interrupts are disabled */
+
+ /* set a new stack at the bottom of our page... */
+ /* (not really needed now) */
+ addi r1, r4, KEXEC_CONTROL_CODE_SIZE - 8 /* for LR Save+Back Chain */
+ stw r0, 0(r1)
+
+ /* Do the copies */
+ li r6, 0 /* checksum */
+ mr r0, r3
+ b 1f
+
+0: /* top, read another word for the indirection page */
+ lwzu r0, 4(r3)
+
+1:
+ /* is it a destination page? (r8) */
+ rlwinm. r7, r0, 0, 31, 31 /* IND_DESTINATION (1<<0) */
+ beq 2f
+
+ rlwinm r8, r0, 0, 0, 19 /* clear kexec flags, page align */
+ b 0b
+
+2: /* is it an indirection page? (r3) */
+ rlwinm. r7, r0, 0, 30, 30 /* IND_INDIRECTION (1<<1) */
+ beq 2f
+
+ rlwinm r3, r0, 0, 0, 19 /* clear kexec flags, page align */
+ subi r3, r3, 4
+ b 0b
+
+2: /* are we done? */
+ rlwinm. r7, r0, 0, 29, 29 /* IND_DONE (1<<2) */
+ beq 2f
+ b 3f
+
+2: /* is it a source page? (r9) */
+ rlwinm. r7, r0, 0, 28, 28 /* IND_SOURCE (1<<3) */
+ beq 0b
+
+ rlwinm r9, r0, 0, 0, 19 /* clear kexec flags, page align */
+
+ li r7, PAGE_SIZE / 4
+ mtctr r7
+ subi r9, r9, 4
+ subi r8, r8, 4
+9:
+ lwzu r0, 4(r9) /* do the copy */
+ xor r6, r6, r0
+ stwu r0, 4(r8)
+ dcbst 0, r8
+ sync
+ icbi 0, r8
+ bdnz 9b
+
+ addi r9, r9, 4
+ addi r8, r8, 4
+ b 0b
+
+3:
+
+ /* To be certain of avoiding problems with self-modifying code
+ * execute a serializing instruction here.
+ */
+ isync
+ sync
+
+ /* jump to the entry point, usually the setup routine */
+ mtlr r5
+ blrl
+
+1: b 1b
+
+relocate_new_kernel_end:
+
+ .globl relocate_new_kernel_size
+relocate_new_kernel_size:
+ .long relocate_new_kernel_end - relocate_new_kernel
+#endif
diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c
index c0fcd29918ce..fd7db8d542db 100644
--- a/arch/powerpc/kernel/nvram_64.c
+++ b/arch/powerpc/kernel/nvram_64.c
@@ -80,80 +80,74 @@ static loff_t dev_nvram_llseek(struct file *file, loff_t offset, int origin)
static ssize_t dev_nvram_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
- ssize_t len;
- char *tmp_buffer;
- int size;
+ ssize_t ret;
+ char *tmp = NULL;
+ ssize_t size;
- if (ppc_md.nvram_size == NULL)
- return -ENODEV;
+ ret = -ENODEV;
+ if (!ppc_md.nvram_size)
+ goto out;
+
+ ret = 0;
size = ppc_md.nvram_size();
+ if (*ppos >= size || size < 0)
+ goto out;
- if (!access_ok(VERIFY_WRITE, buf, count))
- return -EFAULT;
- if (*ppos >= size)
- return 0;
- if (count > size)
- count = size;
+ count = min_t(size_t, count, size - *ppos);
+ count = min(count, PAGE_SIZE);
- tmp_buffer = (char *) kmalloc(count, GFP_KERNEL);
- if (!tmp_buffer) {
- printk(KERN_ERR "dev_read_nvram: kmalloc failed\n");
- return -ENOMEM;
- }
+ ret = -ENOMEM;
+ tmp = kmalloc(count, GFP_KERNEL);
+ if (!tmp)
+ goto out;
- len = ppc_md.nvram_read(tmp_buffer, count, ppos);
- if ((long)len <= 0) {
- kfree(tmp_buffer);
- return len;
- }
+ ret = ppc_md.nvram_read(tmp, count, ppos);
+ if (ret <= 0)
+ goto out;
- if (copy_to_user(buf, tmp_buffer, len)) {
- kfree(tmp_buffer);
- return -EFAULT;
- }
+ if (copy_to_user(buf, tmp, ret))
+ ret = -EFAULT;
- kfree(tmp_buffer);
- return len;
+out:
+ kfree(tmp);
+ return ret;
}
static ssize_t dev_nvram_write(struct file *file, const char __user *buf,
- size_t count, loff_t *ppos)
+ size_t count, loff_t *ppos)
{
- ssize_t len;
- char * tmp_buffer;
- int size;
+ ssize_t ret;
+ char *tmp = NULL;
+ ssize_t size;
- if (ppc_md.nvram_size == NULL)
- return -ENODEV;
+ ret = -ENODEV;
+ if (!ppc_md.nvram_size)
+ goto out;
+
+ ret = 0;
size = ppc_md.nvram_size();
+ if (*ppos >= size || size < 0)
+ goto out;
- if (!access_ok(VERIFY_READ, buf, count))
- return -EFAULT;
- if (*ppos >= size)
- return 0;
- if (count > size)
- count = size;
+ count = min_t(size_t, count, size - *ppos);
+ count = min(count, PAGE_SIZE);
- tmp_buffer = (char *) kmalloc(count, GFP_KERNEL);
- if (!tmp_buffer) {
- printk(KERN_ERR "dev_nvram_write: kmalloc failed\n");
- return -ENOMEM;
- }
-
- if (copy_from_user(tmp_buffer, buf, count)) {
- kfree(tmp_buffer);
- return -EFAULT;
- }
+ ret = -ENOMEM;
+ tmp = kmalloc(count, GFP_KERNEL);
+ if (!tmp)
+ goto out;
- len = ppc_md.nvram_write(tmp_buffer, count, ppos);
- if ((long)len <= 0) {
- kfree(tmp_buffer);
- return len;
- }
+ ret = -EFAULT;
+ if (copy_from_user(tmp, buf, count))
+ goto out;
+
+ ret = ppc_md.nvram_write(tmp, count, ppos);
+
+out:
+ kfree(tmp);
+ return ret;
- kfree(tmp_buffer);
- return len;
}
static int dev_nvram_ioctl(struct inode *inode, struct file *file,
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index a7b68f911eb1..999bdd816769 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -17,6 +17,7 @@
#include <asm/page.h>
#include <asm/lppaca.h>
#include <asm/iseries/it_lp_queue.h>
+#include <asm/iseries/it_lp_reg_save.h>
#include <asm/paca.h>
@@ -26,8 +27,7 @@ extern unsigned long __toc_start;
/* The Paca is an array with one entry per processor. Each contains an
* lppaca, which contains the information shared between the
- * hypervisor and Linux. Each also contains an ItLpRegSave area which
- * is used by the hypervisor to save registers.
+ * hypervisor and Linux.
* On systems with hardware multi-threading, there are two threads
* per processor. The Paca array must contain an entry for each thread.
* The VPD Areas will give a max logical processors = 2 * max physical
@@ -37,7 +37,6 @@ extern unsigned long __toc_start;
#define PACA_INIT_COMMON(number, start, asrr, asrv) \
.lock_token = 0x8000, \
.paca_index = (number), /* Paca Index */ \
- .default_decr = 0x00ff0000, /* Initial Decr */ \
.kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL, \
.stab_real = (asrr), /* Real pointer to segment table */ \
.stab_addr = (asrv), /* Virt pointer to segment table */ \
@@ -57,11 +56,7 @@ extern unsigned long __toc_start;
#ifdef CONFIG_PPC_ISERIES
#define PACA_INIT_ISERIES(number) \
.lppaca_ptr = &paca[number].lppaca, \
- .reg_save_ptr = &paca[number].reg_save, \
- .reg_save = { \
- .xDesc = 0xd397d9e2, /* "LpRS" */ \
- .xSize = sizeof(struct ItLpRegSave) \
- }
+ .reg_save_ptr = &iseries_reg_save[number],
#define PACA_INIT(number) \
{ \
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 8b6008ab217d..fc60a773af7d 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -34,7 +34,7 @@
#ifdef DEBUG
#include <asm/udbg.h>
-#define DBG(fmt...) udbg_printf(fmt)
+#define DBG(fmt...) printk(fmt)
#else
#define DBG(fmt...)
#endif
@@ -251,7 +251,7 @@ void pcibios_free_controller(struct pci_controller *phb)
kfree(phb);
}
-static void __init pcibios_claim_one_bus(struct pci_bus *b)
+void __devinit pcibios_claim_one_bus(struct pci_bus *b)
{
struct pci_dev *dev;
struct pci_bus *child_bus;
@@ -323,6 +323,7 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev)
addrs = (u32 *) get_property(node, "assigned-addresses", &proplen);
if (!addrs)
return;
+ DBG(" parse addresses (%d bytes) @ %p\n", proplen, addrs);
for (; proplen >= 20; proplen -= 20, addrs += 5) {
flags = pci_parse_of_flags(addrs[0]);
if (!flags)
@@ -332,6 +333,9 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev)
if (!size)
continue;
i = addrs[0] & 0xff;
+ DBG(" base: %llx, size: %llx, i: %x\n",
+ (unsigned long long)base, (unsigned long long)size, i);
+
if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) {
res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
} else if (i == dev->rom_base_reg) {
@@ -362,6 +366,8 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
if (type == NULL)
type = "";
+ DBG(" create device, devfn: %x, type: %s\n", devfn, type);
+
memset(dev, 0, sizeof(struct pci_dev));
dev->bus = bus;
dev->sysdata = node;
@@ -381,6 +387,8 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
dev->class = get_int_prop(node, "class-code", 0);
+ DBG(" class: 0x%x\n", dev->class);
+
dev->current_state = 4; /* unknown power state */
if (!strcmp(type, "pci")) {
@@ -402,6 +410,8 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
pci_parse_of_addrs(node, dev);
+ DBG(" adding to system ...\n");
+
pci_device_add(dev, bus);
/* XXX pci_scan_msi_device(dev); */
@@ -418,15 +428,21 @@ void __devinit of_scan_bus(struct device_node *node,
int reglen, devfn;
struct pci_dev *dev;
+ DBG("of_scan_bus(%s) bus no %d... \n", node->full_name, bus->number);
+
while ((child = of_get_next_child(node, child)) != NULL) {
+ DBG(" * %s\n", child->full_name);
reg = (u32 *) get_property(child, "reg", &reglen);
if (reg == NULL || reglen < 20)
continue;
devfn = (reg[0] >> 8) & 0xff;
+
/* create a new pci_dev for this device */
dev = of_create_pci_dev(child, bus, devfn);
if (!dev)
continue;
+ DBG("dev header type: %x\n", dev->hdr_type);
+
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
of_scan_pci_bridge(child, dev);
@@ -446,16 +462,18 @@ void __devinit of_scan_pci_bridge(struct device_node *node,
unsigned int flags;
u64 size;
+ DBG("of_scan_pci_bridge(%s)\n", node->full_name);
+
/* parse bus-range property */
busrange = (u32 *) get_property(node, "bus-range", &len);
if (busrange == NULL || len != 8) {
- printk(KERN_ERR "Can't get bus-range for PCI-PCI bridge %s\n",
+ printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n",
node->full_name);
return;
}
ranges = (u32 *) get_property(node, "ranges", &len);
if (ranges == NULL) {
- printk(KERN_ERR "Can't get ranges for PCI-PCI bridge %s\n",
+ printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n",
node->full_name);
return;
}
@@ -509,10 +527,13 @@ void __devinit of_scan_pci_bridge(struct device_node *node,
}
sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
bus->number);
+ DBG(" bus name: %s\n", bus->name);
mode = PCI_PROBE_NORMAL;
if (ppc_md.pci_probe_mode)
mode = ppc_md.pci_probe_mode(bus);
+ DBG(" probe mode: %d\n", mode);
+
if (mode == PCI_PROBE_DEVTREE)
of_scan_bus(node, bus);
else if (mode == PCI_PROBE_NORMAL)
@@ -528,6 +549,8 @@ void __devinit scan_phb(struct pci_controller *hose)
int i, mode;
struct resource *res;
+ DBG("Scanning PHB %s\n", node ? node->full_name : "<NO NAME>");
+
bus = pci_create_bus(NULL, hose->first_busno, hose->ops, node);
if (bus == NULL) {
printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
@@ -552,8 +575,9 @@ void __devinit scan_phb(struct pci_controller *hose)
mode = PCI_PROBE_NORMAL;
#ifdef CONFIG_PPC_MULTIPLATFORM
- if (ppc_md.pci_probe_mode)
+ if (node && ppc_md.pci_probe_mode)
mode = ppc_md.pci_probe_mode(bus);
+ DBG(" probe mode: %d\n", mode);
if (mode == PCI_PROBE_DEVTREE) {
bus->subordinate = hose->last_busno;
of_scan_bus(node, bus);
@@ -842,8 +866,7 @@ pgprot_t pci_phys_mem_access_prot(struct file *file,
* Returns a negative error code on failure, zero on success.
*/
int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state,
- int write_combine)
+ enum pci_mmap_state mmap_state, int write_combine)
{
unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
struct resource *rp;
@@ -896,6 +919,25 @@ static void __devinit pci_process_ISA_OF_ranges(struct device_node *isa_node,
unsigned long phb_io_base_phys,
void __iomem * phb_io_base_virt)
{
+ /* Remove these asap */
+
+ struct pci_address {
+ u32 a_hi;
+ u32 a_mid;
+ u32 a_lo;
+ };
+
+ struct isa_address {
+ u32 a_hi;
+ u32 a_lo;
+ };
+
+ struct isa_range {
+ struct isa_address isa_addr;
+ struct pci_address pci_addr;
+ unsigned int size;
+ };
+
struct isa_range *range;
unsigned long pci_addr;
unsigned int isa_addr;
@@ -1223,6 +1265,7 @@ void __devinit pcibios_fixup_device_resources(struct pci_dev *dev,
}
EXPORT_SYMBOL(pcibios_fixup_device_resources);
+
static void __devinit do_bus_setup(struct pci_bus *bus)
{
struct pci_dev *dev;
@@ -1306,8 +1349,38 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
*end = rsrc->end + offset;
}
+struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node)
+{
+ if (!have_of)
+ return NULL;
+ while(node) {
+ struct pci_controller *hose, *tmp;
+ list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
+ if (hose->arch_data == node)
+ return hose;
+ node = node->parent;
+ }
+ return NULL;
+}
+
#endif /* CONFIG_PPC_MULTIPLATFORM */
+unsigned long pci_address_to_pio(phys_addr_t address)
+{
+ struct pci_controller *hose, *tmp;
+
+ list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+ if (address >= hose->io_base_phys &&
+ address < (hose->io_base_phys + hose->pci_io_size)) {
+ unsigned long base =
+ (unsigned long)hose->io_base_virt - pci_io_base;
+ return base + (address - hose->io_base_phys);
+ }
+ }
+ return (unsigned int)-1;
+}
+EXPORT_SYMBOL_GPL(pci_address_to_pio);
+
#define IOBASE_BRIDGE_NUMBER 0
#define IOBASE_MEMORY 1
diff --git a/arch/powerpc/kernel/pmc.c b/arch/powerpc/kernel/pmc.c
index 2d333cc84082..e6fb194fe537 100644
--- a/arch/powerpc/kernel/pmc.c
+++ b/arch/powerpc/kernel/pmc.c
@@ -43,8 +43,13 @@ static void dummy_perf(struct pt_regs *regs)
mtspr(SPRN_MMCR0, mmcr0);
}
#else
+/* Ensure exceptions are disabled */
static void dummy_perf(struct pt_regs *regs)
{
+ unsigned int mmcr0 = mfspr(SPRN_MMCR0);
+
+ mmcr0 &= ~(MMCR0_PMXE);
+ mtspr(SPRN_MMCR0, mmcr0);
}
#endif
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index 94db25708456..b2758148a0de 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -76,11 +76,6 @@ EXPORT_SYMBOL(single_step_exception);
EXPORT_SYMBOL(sys_sigreturn);
#endif
-#if defined(CONFIG_PPC_PREP)
-EXPORT_SYMBOL(_prep_type);
-EXPORT_SYMBOL(ucSystemType);
-#endif
-
EXPORT_SYMBOL(strcpy);
EXPORT_SYMBOL(strncpy);
EXPORT_SYMBOL(strcat);
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 3bf968e74095..977ee3adaf2d 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -29,6 +29,7 @@
#include <linux/initrd.h>
#include <linux/bitops.h>
#include <linux/module.h>
+#include <linux/kexec.h>
#include <asm/prom.h>
#include <asm/rtas.h>
@@ -37,6 +38,7 @@
#include <asm/processor.h>
#include <asm/irq.h>
#include <asm/io.h>
+#include <asm/kdump.h>
#include <asm/smp.h>
#include <asm/system.h>
#include <asm/mmu.h>
@@ -55,21 +57,6 @@
#define DBG(fmt...)
#endif
-struct pci_reg_property {
- struct pci_address addr;
- u32 size_hi;
- u32 size_lo;
-};
-
-struct isa_reg_property {
- u32 space;
- u32 address;
- u32 size;
-};
-
-
-typedef int interpret_func(struct device_node *, unsigned long *,
- int, int, int);
static int __initdata dt_root_addr_cells;
static int __initdata dt_root_size_cells;
@@ -311,6 +298,16 @@ static int __devinit finish_node_interrupts(struct device_node *np,
int i, j, n, sense;
unsigned int *irq, virq;
struct device_node *ic;
+ int trace = 0;
+
+ //#define TRACE(fmt...) do { if (trace) { printk(fmt); mdelay(1000); } } while(0)
+#define TRACE(fmt...)
+
+ if (!strcmp(np->name, "smu-doorbell"))
+ trace = 1;
+
+ TRACE("Finishing SMU doorbell ! num_interrupt_controllers = %d\n",
+ num_interrupt_controllers);
if (num_interrupt_controllers == 0) {
/*
@@ -345,11 +342,12 @@ static int __devinit finish_node_interrupts(struct device_node *np,
}
ints = (unsigned int *) get_property(np, "interrupts", &intlen);
+ TRACE("ints=%p, intlen=%d\n", ints, intlen);
if (ints == NULL)
return 0;
intrcells = prom_n_intr_cells(np);
intlen /= intrcells * sizeof(unsigned int);
-
+ TRACE("intrcells=%d, new intlen=%d\n", intrcells, intlen);
np->intrs = prom_alloc(intlen * sizeof(*(np->intrs)), mem_start);
if (!np->intrs)
return -ENOMEM;
@@ -360,6 +358,7 @@ static int __devinit finish_node_interrupts(struct device_node *np,
intrcount = 0;
for (i = 0; i < intlen; ++i, ints += intrcells) {
n = map_interrupt(&irq, &ic, np, ints, intrcells);
+ TRACE("map, irq=%d, ic=%p, n=%d\n", irq, ic, n);
if (n <= 0)
continue;
@@ -370,6 +369,7 @@ static int __devinit finish_node_interrupts(struct device_node *np,
np->intrs[intrcount].sense = map_isa_senses[sense];
} else {
virq = virt_irq_create_mapping(irq[0]);
+ TRACE("virq=%d\n", virq);
#ifdef CONFIG_PPC64
if (virq == NO_IRQ) {
printk(KERN_CRIT "Could not allocate interrupt"
@@ -379,6 +379,12 @@ static int __devinit finish_node_interrupts(struct device_node *np,
#endif
np->intrs[intrcount].line = irq_offset_up(virq);
sense = (n > 1)? (irq[1] & 3): 1;
+
+ /* Apple uses bits in there in a different way, let's
+ * only keep the real sense bit on macs
+ */
+ if (_machine == PLATFORM_POWERMAC)
+ sense &= 0x1;
np->intrs[intrcount].sense = map_mpic_senses[sense];
}
@@ -388,12 +394,13 @@ static int __devinit finish_node_interrupts(struct device_node *np,
char *name = get_property(ic->parent, "name", NULL);
if (name && !strcmp(name, "u3"))
np->intrs[intrcount].line += 128;
- else if (!(name && !strcmp(name, "mac-io")))
+ else if (!(name && (!strcmp(name, "mac-io") ||
+ !strcmp(name, "u4"))))
/* ignore other cascaded controllers, such as
the k2-sata-root */
break;
}
-#endif
+#endif /* CONFIG_PPC64 */
if (n > 2) {
printk("hmmm, got %d intr cells for %s:", n,
np->full_name);
@@ -408,234 +415,19 @@ static int __devinit finish_node_interrupts(struct device_node *np,
return 0;
}
-static int __devinit interpret_pci_props(struct device_node *np,
- unsigned long *mem_start,
- int naddrc, int nsizec,
- int measure_only)
-{
- struct address_range *adr;
- struct pci_reg_property *pci_addrs;
- int i, l, n_addrs;
-
- pci_addrs = (struct pci_reg_property *)
- get_property(np, "assigned-addresses", &l);
- if (!pci_addrs)
- return 0;
-
- n_addrs = l / sizeof(*pci_addrs);
-
- adr = prom_alloc(n_addrs * sizeof(*adr), mem_start);
- if (!adr)
- return -ENOMEM;
-
- if (measure_only)
- return 0;
-
- np->addrs = adr;
- np->n_addrs = n_addrs;
-
- for (i = 0; i < n_addrs; i++) {
- adr[i].space = pci_addrs[i].addr.a_hi;
- adr[i].address = pci_addrs[i].addr.a_lo |
- ((u64)pci_addrs[i].addr.a_mid << 32);
- adr[i].size = pci_addrs[i].size_lo;
- }
-
- return 0;
-}
-
-static int __init interpret_dbdma_props(struct device_node *np,
- unsigned long *mem_start,
- int naddrc, int nsizec,
- int measure_only)
-{
- struct reg_property32 *rp;
- struct address_range *adr;
- unsigned long base_address;
- int i, l;
- struct device_node *db;
-
- base_address = 0;
- if (!measure_only) {
- for (db = np->parent; db != NULL; db = db->parent) {
- if (!strcmp(db->type, "dbdma") && db->n_addrs != 0) {
- base_address = db->addrs[0].address;
- break;
- }
- }
- }
-
- rp = (struct reg_property32 *) get_property(np, "reg", &l);
- if (rp != 0 && l >= sizeof(struct reg_property32)) {
- i = 0;
- adr = (struct address_range *) (*mem_start);
- while ((l -= sizeof(struct reg_property32)) >= 0) {
- if (!measure_only) {
- adr[i].space = 2;
- adr[i].address = rp[i].address + base_address;
- adr[i].size = rp[i].size;
- }
- ++i;
- }
- np->addrs = adr;
- np->n_addrs = i;
- (*mem_start) += i * sizeof(struct address_range);
- }
-
- return 0;
-}
-
-static int __init interpret_macio_props(struct device_node *np,
- unsigned long *mem_start,
- int naddrc, int nsizec,
- int measure_only)
-{
- struct reg_property32 *rp;
- struct address_range *adr;
- unsigned long base_address;
- int i, l;
- struct device_node *db;
-
- base_address = 0;
- if (!measure_only) {
- for (db = np->parent; db != NULL; db = db->parent) {
- if (!strcmp(db->type, "mac-io") && db->n_addrs != 0) {
- base_address = db->addrs[0].address;
- break;
- }
- }
- }
-
- rp = (struct reg_property32 *) get_property(np, "reg", &l);
- if (rp != 0 && l >= sizeof(struct reg_property32)) {
- i = 0;
- adr = (struct address_range *) (*mem_start);
- while ((l -= sizeof(struct reg_property32)) >= 0) {
- if (!measure_only) {
- adr[i].space = 2;
- adr[i].address = rp[i].address + base_address;
- adr[i].size = rp[i].size;
- }
- ++i;
- }
- np->addrs = adr;
- np->n_addrs = i;
- (*mem_start) += i * sizeof(struct address_range);
- }
-
- return 0;
-}
-
-static int __init interpret_isa_props(struct device_node *np,
- unsigned long *mem_start,
- int naddrc, int nsizec,
- int measure_only)
-{
- struct isa_reg_property *rp;
- struct address_range *adr;
- int i, l;
-
- rp = (struct isa_reg_property *) get_property(np, "reg", &l);
- if (rp != 0 && l >= sizeof(struct isa_reg_property)) {
- i = 0;
- adr = (struct address_range *) (*mem_start);
- while ((l -= sizeof(struct isa_reg_property)) >= 0) {
- if (!measure_only) {
- adr[i].space = rp[i].space;
- adr[i].address = rp[i].address;
- adr[i].size = rp[i].size;
- }
- ++i;
- }
- np->addrs = adr;
- np->n_addrs = i;
- (*mem_start) += i * sizeof(struct address_range);
- }
-
- return 0;
-}
-
-static int __init interpret_root_props(struct device_node *np,
- unsigned long *mem_start,
- int naddrc, int nsizec,
- int measure_only)
-{
- struct address_range *adr;
- int i, l;
- unsigned int *rp;
- int rpsize = (naddrc + nsizec) * sizeof(unsigned int);
-
- rp = (unsigned int *) get_property(np, "reg", &l);
- if (rp != 0 && l >= rpsize) {
- i = 0;
- adr = (struct address_range *) (*mem_start);
- while ((l -= rpsize) >= 0) {
- if (!measure_only) {
- adr[i].space = 0;
- adr[i].address = rp[naddrc - 1];
- adr[i].size = rp[naddrc + nsizec - 1];
- }
- ++i;
- rp += naddrc + nsizec;
- }
- np->addrs = adr;
- np->n_addrs = i;
- (*mem_start) += i * sizeof(struct address_range);
- }
-
- return 0;
-}
-
static int __devinit finish_node(struct device_node *np,
unsigned long *mem_start,
- interpret_func *ifunc,
- int naddrc, int nsizec,
int measure_only)
{
struct device_node *child;
- int *ip, rc = 0;
-
- /* get the device addresses and interrupts */
- if (ifunc != NULL)
- rc = ifunc(np, mem_start, naddrc, nsizec, measure_only);
- if (rc)
- goto out;
+ int rc = 0;
rc = finish_node_interrupts(np, mem_start, measure_only);
if (rc)
goto out;
- /* Look for #address-cells and #size-cells properties. */
- ip = (int *) get_property(np, "#address-cells", NULL);
- if (ip != NULL)
- naddrc = *ip;
- ip = (int *) get_property(np, "#size-cells", NULL);
- if (ip != NULL)
- nsizec = *ip;
-
- if (!strcmp(np->name, "device-tree") || np->parent == NULL)
- ifunc = interpret_root_props;
- else if (np->type == 0)
- ifunc = NULL;
- else if (!strcmp(np->type, "pci") || !strcmp(np->type, "vci"))
- ifunc = interpret_pci_props;
- else if (!strcmp(np->type, "dbdma"))
- ifunc = interpret_dbdma_props;
- else if (!strcmp(np->type, "mac-io") || ifunc == interpret_macio_props)
- ifunc = interpret_macio_props;
- else if (!strcmp(np->type, "isa"))
- ifunc = interpret_isa_props;
- else if (!strcmp(np->name, "uni-n") || !strcmp(np->name, "u3"))
- ifunc = interpret_root_props;
- else if (!((ifunc == interpret_dbdma_props
- || ifunc == interpret_macio_props)
- && (!strcmp(np->type, "escc")
- || !strcmp(np->type, "media-bay"))))
- ifunc = NULL;
-
for (child = np->child; child != NULL; child = child->sibling) {
- rc = finish_node(child, mem_start, ifunc,
- naddrc, nsizec, measure_only);
+ rc = finish_node(child, mem_start, measure_only);
if (rc)
goto out;
}
@@ -697,10 +489,10 @@ void __init finish_device_tree(void)
* reason and then remove those additional 16 bytes
*/
size = 16;
- finish_node(allnodes, &size, NULL, 0, 0, 1);
+ finish_node(allnodes, &size, 1);
size -= 16;
end = start = (unsigned long) __va(lmb_alloc(size, 128));
- finish_node(allnodes, &end, NULL, 0, 0, 0);
+ finish_node(allnodes, &end, 0);
BUG_ON(end != start + size);
DBG(" <- finish_device_tree\n");
@@ -1197,6 +989,16 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
}
#endif /* CONFIG_PPC_RTAS */
+#ifdef CONFIG_KEXEC
+ lprop = (u64*)of_get_flat_dt_prop(node, "linux,crashkernel-base", NULL);
+ if (lprop)
+ crashk_res.start = *lprop;
+
+ lprop = (u64*)of_get_flat_dt_prop(node, "linux,crashkernel-size", NULL);
+ if (lprop)
+ crashk_res.end = crashk_res.start + *lprop - 1;
+#endif
+
/* break now */
return 1;
}
@@ -1263,7 +1065,9 @@ static int __init early_init_dt_scan_memory(unsigned long node,
} else if (strcmp(type, "memory") != 0)
return 0;
- reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l);
+ reg = (cell_t *)of_get_flat_dt_prop(node, "linux,usable-memory", &l);
+ if (reg == NULL)
+ reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l);
if (reg == NULL)
return 0;
@@ -1335,11 +1139,14 @@ void __init early_init_devtree(void *params)
of_scan_flat_dt(early_init_dt_scan_memory, NULL);
lmb_enforce_memory_limit(memory_limit);
lmb_analyze();
- lmb_reserve(0, __pa(klimit));
DBG("Phys. mem: %lx\n", lmb_phys_mem_size());
/* Reserve LMB regions used by kernel, initrd, dt, etc... */
+ lmb_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
+#ifdef CONFIG_CRASH_DUMP
+ lmb_reserve(0, KDUMP_RESERVE_LIMIT);
+#endif
early_reserve_mem();
DBG("Scanning CPUs ...\n");
@@ -1802,7 +1609,6 @@ static void of_node_release(struct kref *kref)
prop = next;
}
kfree(node->intrs);
- kfree(node->addrs);
kfree(node->full_name);
kfree(node->data);
kfree(node);
@@ -1884,9 +1690,7 @@ void of_detach_node(const struct device_node *np)
* This should probably be split up into smaller chunks.
*/
-static int of_finish_dynamic_node(struct device_node *node,
- unsigned long *unused1, int unused2,
- int unused3, int unused4)
+static int of_finish_dynamic_node(struct device_node *node)
{
struct device_node *parent = of_get_parent(node);
int err = 0;
@@ -1907,7 +1711,8 @@ static int of_finish_dynamic_node(struct device_node *node,
return -ENODEV;
/* fix up new node's linux_phandle field */
- if ((ibm_phandle = (unsigned int *)get_property(node, "ibm,phandle", NULL)))
+ if ((ibm_phandle = (unsigned int *)get_property(node,
+ "ibm,phandle", NULL)))
node->linux_phandle = *ibm_phandle;
out:
@@ -1922,7 +1727,9 @@ static int prom_reconfig_notifier(struct notifier_block *nb,
switch (action) {
case PSERIES_RECONFIG_ADD:
- err = finish_node(node, NULL, of_finish_dynamic_node, 0, 0, 0);
+ err = of_finish_dynamic_node(node);
+ if (!err)
+ finish_node(node, NULL, 0);
if (err < 0) {
printk(KERN_ERR "finish_node returned %d\n", err);
err = NOTIFY_BAD;
@@ -1996,175 +1803,4 @@ int prom_add_property(struct device_node* np, struct property* prop)
return 0;
}
-/* I quickly hacked that one, check against spec ! */
-static inline unsigned long
-bus_space_to_resource_flags(unsigned int bus_space)
-{
- u8 space = (bus_space >> 24) & 0xf;
- if (space == 0)
- space = 0x02;
- if (space == 0x02)
- return IORESOURCE_MEM;
- else if (space == 0x01)
- return IORESOURCE_IO;
- else {
- printk(KERN_WARNING "prom.c: bus_space_to_resource_flags(), space: %x\n",
- bus_space);
- return 0;
- }
-}
-
-#ifdef CONFIG_PCI
-static struct resource *find_parent_pci_resource(struct pci_dev* pdev,
- struct address_range *range)
-{
- unsigned long mask;
- int i;
-
- /* Check this one */
- mask = bus_space_to_resource_flags(range->space);
- for (i=0; i<DEVICE_COUNT_RESOURCE; i++) {
- if ((pdev->resource[i].flags & mask) == mask &&
- pdev->resource[i].start <= range->address &&
- pdev->resource[i].end > range->address) {
- if ((range->address + range->size - 1) > pdev->resource[i].end) {
- /* Add better message */
- printk(KERN_WARNING "PCI/OF resource overlap !\n");
- return NULL;
- }
- break;
- }
- }
- if (i == DEVICE_COUNT_RESOURCE)
- return NULL;
- return &pdev->resource[i];
-}
-
-/*
- * Request an OF device resource. Currently handles child of PCI devices,
- * or other nodes attached to the root node. Ultimately, put some
- * link to resources in the OF node.
- */
-struct resource *request_OF_resource(struct device_node* node, int index,
- const char* name_postfix)
-{
- struct pci_dev* pcidev;
- u8 pci_bus, pci_devfn;
- unsigned long iomask;
- struct device_node* nd;
- struct resource* parent;
- struct resource *res = NULL;
- int nlen, plen;
-
- if (index >= node->n_addrs)
- goto fail;
-
- /* Sanity check on bus space */
- iomask = bus_space_to_resource_flags(node->addrs[index].space);
- if (iomask & IORESOURCE_MEM)
- parent = &iomem_resource;
- else if (iomask & IORESOURCE_IO)
- parent = &ioport_resource;
- else
- goto fail;
-
- /* Find a PCI parent if any */
- nd = node;
- pcidev = NULL;
- while (nd) {
- if (!pci_device_from_OF_node(nd, &pci_bus, &pci_devfn))
- pcidev = pci_find_slot(pci_bus, pci_devfn);
- if (pcidev) break;
- nd = nd->parent;
- }
- if (pcidev)
- parent = find_parent_pci_resource(pcidev, &node->addrs[index]);
- if (!parent) {
- printk(KERN_WARNING "request_OF_resource(%s), parent not found\n",
- node->name);
- goto fail;
- }
- res = __request_region(parent, node->addrs[index].address,
- node->addrs[index].size, NULL);
- if (!res)
- goto fail;
- nlen = strlen(node->name);
- plen = name_postfix ? strlen(name_postfix) : 0;
- res->name = (const char *)kmalloc(nlen+plen+1, GFP_KERNEL);
- if (res->name) {
- strcpy((char *)res->name, node->name);
- if (plen)
- strcpy((char *)res->name+nlen, name_postfix);
- }
- return res;
-fail:
- return NULL;
-}
-EXPORT_SYMBOL(request_OF_resource);
-
-int release_OF_resource(struct device_node *node, int index)
-{
- struct pci_dev* pcidev;
- u8 pci_bus, pci_devfn;
- unsigned long iomask, start, end;
- struct device_node* nd;
- struct resource* parent;
- struct resource *res = NULL;
-
- if (index >= node->n_addrs)
- return -EINVAL;
-
- /* Sanity check on bus space */
- iomask = bus_space_to_resource_flags(node->addrs[index].space);
- if (iomask & IORESOURCE_MEM)
- parent = &iomem_resource;
- else if (iomask & IORESOURCE_IO)
- parent = &ioport_resource;
- else
- return -EINVAL;
-
- /* Find a PCI parent if any */
- nd = node;
- pcidev = NULL;
- while(nd) {
- if (!pci_device_from_OF_node(nd, &pci_bus, &pci_devfn))
- pcidev = pci_find_slot(pci_bus, pci_devfn);
- if (pcidev) break;
- nd = nd->parent;
- }
- if (pcidev)
- parent = find_parent_pci_resource(pcidev, &node->addrs[index]);
- if (!parent) {
- printk(KERN_WARNING "release_OF_resource(%s), parent not found\n",
- node->name);
- return -ENODEV;
- }
-
- /* Find us in the parent and its childs */
- res = parent->child;
- start = node->addrs[index].address;
- end = start + node->addrs[index].size - 1;
- while (res) {
- if (res->start == start && res->end == end &&
- (res->flags & IORESOURCE_BUSY))
- break;
- if (res->start <= start && res->end >= end)
- res = res->child;
- else
- res = res->sibling;
- }
- if (!res)
- return -ENODEV;
-
- if (res->name) {
- kfree(res->name);
- res->name = NULL;
- }
- release_resource(res);
- kfree(res);
-
- return 0;
-}
-EXPORT_SYMBOL(release_OF_resource);
-#endif /* CONFIG_PCI */
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index bcdc209dca85..e381f2fc121c 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -192,6 +192,11 @@ static unsigned long __initdata alloc_bottom;
static unsigned long __initdata rmo_top;
static unsigned long __initdata ram_top;
+#ifdef CONFIG_KEXEC
+static unsigned long __initdata prom_crashk_base;
+static unsigned long __initdata prom_crashk_size;
+#endif
+
static struct mem_map_entry __initdata mem_reserve_map[MEM_RESERVE_MAP_SIZE];
static int __initdata mem_reserve_cnt;
@@ -553,7 +558,8 @@ unsigned long prom_memparse(const char *ptr, const char **retptr)
static void __init early_cmdline_parse(void)
{
struct prom_t *_prom = &RELOC(prom);
- char *opt, *p;
+ const char *opt;
+ char *p;
int l = 0;
RELOC(prom_cmd_line[0]) = 0;
@@ -590,6 +596,34 @@ static void __init early_cmdline_parse(void)
RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000);
#endif
}
+
+#ifdef CONFIG_KEXEC
+ /*
+ * crashkernel=size@addr specifies the location to reserve for
+ * crash kernel.
+ */
+ opt = strstr(RELOC(prom_cmd_line), RELOC("crashkernel="));
+ if (opt) {
+ opt += 12;
+ RELOC(prom_crashk_size) = prom_memparse(opt, &opt);
+
+ if (ALIGN(RELOC(prom_crashk_size), 0x1000000) !=
+ RELOC(prom_crashk_size)) {
+ prom_printf("Warning: crashkernel size is not "
+ "aligned to 16MB\n");
+ }
+
+ /*
+ * At present, the crash kernel always run at 32MB.
+ * Just ignore whatever user passed.
+ */
+ RELOC(prom_crashk_base) = 0x2000000;
+ if (*opt == '@') {
+ prom_printf("Warning: PPC64 kdump kernel always runs "
+ "at 32 MB\n");
+ }
+ }
+#endif
}
#ifdef CONFIG_PPC_PSERIES
@@ -1011,6 +1045,12 @@ static void __init prom_init_mem(void)
prom_printf(" alloc_top_hi : %x\n", RELOC(alloc_top_high));
prom_printf(" rmo_top : %x\n", RELOC(rmo_top));
prom_printf(" ram_top : %x\n", RELOC(ram_top));
+#ifdef CONFIG_KEXEC
+ if (RELOC(prom_crashk_base)) {
+ prom_printf(" crashk_base : %x\n", RELOC(prom_crashk_base));
+ prom_printf(" crashk_size : %x\n", RELOC(prom_crashk_size));
+ }
+#endif
}
@@ -1500,6 +1540,8 @@ static int __init prom_find_machine_type(void)
#ifdef CONFIG_PPC64
if (strstr(p, RELOC("Momentum,Maple")))
return PLATFORM_MAPLE;
+ if (strstr(p, RELOC("IBM,CPB")))
+ return PLATFORM_CELL;
#endif
i += sl + 1;
}
@@ -1994,7 +2036,7 @@ static void __init prom_check_initrd(unsigned long r3, unsigned long r4)
if (r3 && r4 && r4 != 0xdeadbeef) {
unsigned long val;
- RELOC(prom_initrd_start) = (r3 >= KERNELBASE) ? __pa(r3) : r3;
+ RELOC(prom_initrd_start) = is_kernel_addr(r3) ? __pa(r3) : r3;
RELOC(prom_initrd_end) = RELOC(prom_initrd_start) + r4;
val = RELOC(prom_initrd_start);
@@ -2094,6 +2136,10 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
*/
prom_init_mem();
+#ifdef CONFIG_KEXEC
+ if (RELOC(prom_crashk_base))
+ reserve_mem(RELOC(prom_crashk_base), RELOC(prom_crashk_size));
+#endif
/*
* Determine which cpu is actually running right _now_
*/
@@ -2150,6 +2196,16 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
}
#endif
+#ifdef CONFIG_KEXEC
+ if (RELOC(prom_crashk_base)) {
+ prom_setprop(_prom->chosen, "/chosen", "linux,crashkernel-base",
+ PTRRELOC(&prom_crashk_base),
+ sizeof(RELOC(prom_crashk_base)));
+ prom_setprop(_prom->chosen, "/chosen", "linux,crashkernel-size",
+ PTRRELOC(&prom_crashk_size),
+ sizeof(RELOC(prom_crashk_size)));
+ }
+#endif
/*
* Fixup any known bugs in the device-tree
*/
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
new file mode 100644
index 000000000000..309ae1d5fa77
--- /dev/null
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -0,0 +1,547 @@
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/pci_regs.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+
+#ifdef DEBUG
+#define DBG(fmt...) do { printk(fmt); } while(0)
+#else
+#define DBG(fmt...) do { } while(0)
+#endif
+
+#ifdef CONFIG_PPC64
+#define PRu64 "%lx"
+#else
+#define PRu64 "%llx"
+#endif
+
+/* Max address size we deal with */
+#define OF_MAX_ADDR_CELLS 4
+#define OF_CHECK_COUNTS(na, ns) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \
+ (ns) > 0)
+
+/* Debug utility */
+#ifdef DEBUG
+static void of_dump_addr(const char *s, u32 *addr, int na)
+{
+ printk("%s", s);
+ while(na--)
+ printk(" %08x", *(addr++));
+ printk("\n");
+}
+#else
+static void of_dump_addr(const char *s, u32 *addr, int na) { }
+#endif
+
+/* Read a big address */
+static inline u64 of_read_addr(u32 *cell, int size)
+{
+ u64 r = 0;
+ while (size--)
+ r = (r << 32) | *(cell++);
+ return r;
+}
+
+/* Callbacks for bus specific translators */
+struct of_bus {
+ const char *name;
+ const char *addresses;
+ int (*match)(struct device_node *parent);
+ void (*count_cells)(struct device_node *child,
+ int *addrc, int *sizec);
+ u64 (*map)(u32 *addr, u32 *range, int na, int ns, int pna);
+ int (*translate)(u32 *addr, u64 offset, int na);
+ unsigned int (*get_flags)(u32 *addr);
+};
+
+
+/*
+ * Default translator (generic bus)
+ */
+
+static void of_bus_default_count_cells(struct device_node *dev,
+ int *addrc, int *sizec)
+{
+ if (addrc)
+ *addrc = prom_n_addr_cells(dev);
+ if (sizec)
+ *sizec = prom_n_size_cells(dev);
+}
+
+static u64 of_bus_default_map(u32 *addr, u32 *range, int na, int ns, int pna)
+{
+ u64 cp, s, da;
+
+ cp = of_read_addr(range, na);
+ s = of_read_addr(range + na + pna, ns);
+ da = of_read_addr(addr, na);
+
+ DBG("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n",
+ cp, s, da);
+
+ if (da < cp || da >= (cp + s))
+ return OF_BAD_ADDR;
+ return da - cp;
+}
+
+static int of_bus_default_translate(u32 *addr, u64 offset, int na)
+{
+ u64 a = of_read_addr(addr, na);
+ memset(addr, 0, na * 4);
+ a += offset;
+ if (na > 1)
+ addr[na - 2] = a >> 32;
+ addr[na - 1] = a & 0xffffffffu;
+
+ return 0;
+}
+
+static unsigned int of_bus_default_get_flags(u32 *addr)
+{
+ return IORESOURCE_MEM;
+}
+
+
+/*
+ * PCI bus specific translator
+ */
+
+static int of_bus_pci_match(struct device_node *np)
+{
+ return !strcmp(np->type, "pci");
+}
+
+static void of_bus_pci_count_cells(struct device_node *np,
+ int *addrc, int *sizec)
+{
+ if (addrc)
+ *addrc = 3;
+ if (sizec)
+ *sizec = 2;
+}
+
+static u64 of_bus_pci_map(u32 *addr, u32 *range, int na, int ns, int pna)
+{
+ u64 cp, s, da;
+
+ /* Check address type match */
+ if ((addr[0] ^ range[0]) & 0x03000000)
+ return OF_BAD_ADDR;
+
+ /* Read address values, skipping high cell */
+ cp = of_read_addr(range + 1, na - 1);
+ s = of_read_addr(range + na + pna, ns);
+ da = of_read_addr(addr + 1, na - 1);
+
+ DBG("OF: PCI map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da);
+
+ if (da < cp || da >= (cp + s))
+ return OF_BAD_ADDR;
+ return da - cp;
+}
+
+static int of_bus_pci_translate(u32 *addr, u64 offset, int na)
+{
+ return of_bus_default_translate(addr + 1, offset, na - 1);
+}
+
+static unsigned int of_bus_pci_get_flags(u32 *addr)
+{
+ unsigned int flags = 0;
+ u32 w = addr[0];
+
+ switch((w >> 24) & 0x03) {
+ case 0x01:
+ flags |= IORESOURCE_IO;
+ case 0x02: /* 32 bits */
+ case 0x03: /* 64 bits */
+ flags |= IORESOURCE_MEM;
+ }
+ if (w & 0x40000000)
+ flags |= IORESOURCE_PREFETCH;
+ return flags;
+}
+
+/*
+ * ISA bus specific translator
+ */
+
+static int of_bus_isa_match(struct device_node *np)
+{
+ return !strcmp(np->name, "isa");
+}
+
+static void of_bus_isa_count_cells(struct device_node *child,
+ int *addrc, int *sizec)
+{
+ if (addrc)
+ *addrc = 2;
+ if (sizec)
+ *sizec = 1;
+}
+
+static u64 of_bus_isa_map(u32 *addr, u32 *range, int na, int ns, int pna)
+{
+ u64 cp, s, da;
+
+ /* Check address type match */
+ if ((addr[0] ^ range[0]) & 0x00000001)
+ return OF_BAD_ADDR;
+
+ /* Read address values, skipping high cell */
+ cp = of_read_addr(range + 1, na - 1);
+ s = of_read_addr(range + na + pna, ns);
+ da = of_read_addr(addr + 1, na - 1);
+
+ DBG("OF: ISA map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da);
+
+ if (da < cp || da >= (cp + s))
+ return OF_BAD_ADDR;
+ return da - cp;
+}
+
+static int of_bus_isa_translate(u32 *addr, u64 offset, int na)
+{
+ return of_bus_default_translate(addr + 1, offset, na - 1);
+}
+
+static unsigned int of_bus_isa_get_flags(u32 *addr)
+{
+ unsigned int flags = 0;
+ u32 w = addr[0];
+
+ if (w & 1)
+ flags |= IORESOURCE_IO;
+ else
+ flags |= IORESOURCE_MEM;
+ return flags;
+}
+
+
+/*
+ * Array of bus specific translators
+ */
+
+static struct of_bus of_busses[] = {
+ /* PCI */
+ {
+ .name = "pci",
+ .addresses = "assigned-addresses",
+ .match = of_bus_pci_match,
+ .count_cells = of_bus_pci_count_cells,
+ .map = of_bus_pci_map,
+ .translate = of_bus_pci_translate,
+ .get_flags = of_bus_pci_get_flags,
+ },
+ /* ISA */
+ {
+ .name = "isa",
+ .addresses = "reg",
+ .match = of_bus_isa_match,
+ .count_cells = of_bus_isa_count_cells,
+ .map = of_bus_isa_map,
+ .translate = of_bus_isa_translate,
+ .get_flags = of_bus_isa_get_flags,
+ },
+ /* Default */
+ {
+ .name = "default",
+ .addresses = "reg",
+ .match = NULL,
+ .count_cells = of_bus_default_count_cells,
+ .map = of_bus_default_map,
+ .translate = of_bus_default_translate,
+ .get_flags = of_bus_default_get_flags,
+ },
+};
+
+static struct of_bus *of_match_bus(struct device_node *np)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(of_busses); i ++)
+ if (!of_busses[i].match || of_busses[i].match(np))
+ return &of_busses[i];
+ BUG();
+ return NULL;
+}
+
+static int of_translate_one(struct device_node *parent, struct of_bus *bus,
+ struct of_bus *pbus, u32 *addr,
+ int na, int ns, int pna)
+{
+ u32 *ranges;
+ unsigned int rlen;
+ int rone;
+ u64 offset = OF_BAD_ADDR;
+
+ /* Normally, an absence of a "ranges" property means we are
+ * crossing a non-translatable boundary, and thus the addresses
+ * below the current not cannot be converted to CPU physical ones.
+ * Unfortunately, while this is very clear in the spec, it's not
+ * what Apple understood, and they do have things like /uni-n or
+ * /ht nodes with no "ranges" property and a lot of perfectly
+ * useable mapped devices below them. Thus we treat the absence of
+ * "ranges" as equivalent to an empty "ranges" property which means
+ * a 1:1 translation at that level. It's up to the caller not to try
+ * to translate addresses that aren't supposed to be translated in
+ * the first place. --BenH.
+ */
+ ranges = (u32 *)get_property(parent, "ranges", &rlen);
+ if (ranges == NULL || rlen == 0) {
+ offset = of_read_addr(addr, na);
+ memset(addr, 0, pna * 4);
+ DBG("OF: no ranges, 1:1 translation\n");
+ goto finish;
+ }
+
+ DBG("OF: walking ranges...\n");
+
+ /* Now walk through the ranges */
+ rlen /= 4;
+ rone = na + pna + ns;
+ for (; rlen >= rone; rlen -= rone, ranges += rone) {
+ offset = bus->map(addr, ranges, na, ns, pna);
+ if (offset != OF_BAD_ADDR)
+ break;
+ }
+ if (offset == OF_BAD_ADDR) {
+ DBG("OF: not found !\n");
+ return 1;
+ }
+ memcpy(addr, ranges + na, 4 * pna);
+
+ finish:
+ of_dump_addr("OF: parent translation for:", addr, pna);
+ DBG("OF: with offset: "PRu64"\n", offset);
+
+ /* Translate it into parent bus space */
+ return pbus->translate(addr, offset, pna);
+}
+
+
+/*
+ * Translate an address from the device-tree into a CPU physical address,
+ * this walks up the tree and applies the various bus mappings on the
+ * way.
+ *
+ * Note: We consider that crossing any level with #size-cells == 0 to mean
+ * that translation is impossible (that is we are not dealing with a value
+ * that can be mapped to a cpu physical address). This is not really specified
+ * that way, but this is traditionally the way IBM at least do things
+ */
+u64 of_translate_address(struct device_node *dev, u32 *in_addr)
+{
+ struct device_node *parent = NULL;
+ struct of_bus *bus, *pbus;
+ u32 addr[OF_MAX_ADDR_CELLS];
+ int na, ns, pna, pns;
+ u64 result = OF_BAD_ADDR;
+
+ DBG("OF: ** translation for device %s **\n", dev->full_name);
+
+ /* Increase refcount at current level */
+ of_node_get(dev);
+
+ /* Get parent & match bus type */
+ parent = of_get_parent(dev);
+ if (parent == NULL)
+ goto bail;
+ bus = of_match_bus(parent);
+
+ /* Cound address cells & copy address locally */
+ bus->count_cells(dev, &na, &ns);
+ if (!OF_CHECK_COUNTS(na, ns)) {
+ printk(KERN_ERR "prom_parse: Bad cell count for %s\n",
+ dev->full_name);
+ goto bail;
+ }
+ memcpy(addr, in_addr, na * 4);
+
+ DBG("OF: bus is %s (na=%d, ns=%d) on %s\n",
+ bus->name, na, ns, parent->full_name);
+ of_dump_addr("OF: translating address:", addr, na);
+
+ /* Translate */
+ for (;;) {
+ /* Switch to parent bus */
+ of_node_put(dev);
+ dev = parent;
+ parent = of_get_parent(dev);
+
+ /* If root, we have finished */
+ if (parent == NULL) {
+ DBG("OF: reached root node\n");
+ result = of_read_addr(addr, na);
+ break;
+ }
+
+ /* Get new parent bus and counts */
+ pbus = of_match_bus(parent);
+ pbus->count_cells(dev, &pna, &pns);
+ if (!OF_CHECK_COUNTS(pna, pns)) {
+ printk(KERN_ERR "prom_parse: Bad cell count for %s\n",
+ dev->full_name);
+ break;
+ }
+
+ DBG("OF: parent bus is %s (na=%d, ns=%d) on %s\n",
+ pbus->name, pna, pns, parent->full_name);
+
+ /* Apply bus translation */
+ if (of_translate_one(dev, bus, pbus, addr, na, ns, pna))
+ break;
+
+ /* Complete the move up one level */
+ na = pna;
+ ns = pns;
+ bus = pbus;
+
+ of_dump_addr("OF: one level translation:", addr, na);
+ }
+ bail:
+ of_node_put(parent);
+ of_node_put(dev);
+
+ return result;
+}
+EXPORT_SYMBOL(of_translate_address);
+
+u32 *of_get_address(struct device_node *dev, int index, u64 *size,
+ unsigned int *flags)
+{
+ u32 *prop;
+ unsigned int psize;
+ struct device_node *parent;
+ struct of_bus *bus;
+ int onesize, i, na, ns;
+
+ /* Get parent & match bus type */
+ parent = of_get_parent(dev);
+ if (parent == NULL)
+ return NULL;
+ bus = of_match_bus(parent);
+ bus->count_cells(dev, &na, &ns);
+ of_node_put(parent);
+ if (!OF_CHECK_COUNTS(na, ns))
+ return NULL;
+
+ /* Get "reg" or "assigned-addresses" property */
+ prop = (u32 *)get_property(dev, bus->addresses, &psize);
+ if (prop == NULL)
+ return NULL;
+ psize /= 4;
+
+ onesize = na + ns;
+ for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
+ if (i == index) {
+ if (size)
+ *size = of_read_addr(prop + na, ns);
+ if (flags)
+ *flags = bus->get_flags(prop);
+ return prop;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(of_get_address);
+
+u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size,
+ unsigned int *flags)
+{
+ u32 *prop;
+ unsigned int psize;
+ struct device_node *parent;
+ struct of_bus *bus;
+ int onesize, i, na, ns;
+
+ /* Get parent & match bus type */
+ parent = of_get_parent(dev);
+ if (parent == NULL)
+ return NULL;
+ bus = of_match_bus(parent);
+ if (strcmp(bus->name, "pci"))
+ return NULL;
+ bus->count_cells(dev, &na, &ns);
+ of_node_put(parent);
+ if (!OF_CHECK_COUNTS(na, ns))
+ return NULL;
+
+ /* Get "reg" or "assigned-addresses" property */
+ prop = (u32 *)get_property(dev, bus->addresses, &psize);
+ if (prop == NULL)
+ return NULL;
+ psize /= 4;
+
+ onesize = na + ns;
+ for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
+ if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) {
+ if (size)
+ *size = of_read_addr(prop + na, ns);
+ if (flags)
+ *flags = bus->get_flags(prop);
+ return prop;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(of_get_pci_address);
+
+static int __of_address_to_resource(struct device_node *dev, u32 *addrp,
+ u64 size, unsigned int flags,
+ struct resource *r)
+{
+ u64 taddr;
+
+ if ((flags & (IORESOURCE_IO | IORESOURCE_MEM)) == 0)
+ return -EINVAL;
+ taddr = of_translate_address(dev, addrp);
+ if (taddr == OF_BAD_ADDR)
+ return -EINVAL;
+ memset(r, 0, sizeof(struct resource));
+ if (flags & IORESOURCE_IO) {
+ unsigned long port;
+ port = pci_address_to_pio(taddr);
+ if (port == (unsigned long)-1)
+ return -EINVAL;
+ r->start = port;
+ r->end = port + size - 1;
+ } else {
+ r->start = taddr;
+ r->end = taddr + size - 1;
+ }
+ r->flags = flags;
+ r->name = dev->name;
+ return 0;
+}
+
+int of_address_to_resource(struct device_node *dev, int index,
+ struct resource *r)
+{
+ u32 *addrp;
+ u64 size;
+ unsigned int flags;
+
+ addrp = of_get_address(dev, index, &size, &flags);
+ if (addrp == NULL)
+ return -EINVAL;
+ return __of_address_to_resource(dev, addrp, size, flags, r);
+}
+EXPORT_SYMBOL_GPL(of_address_to_resource);
+
+int of_pci_address_to_resource(struct device_node *dev, int bar,
+ struct resource *r)
+{
+ u32 *addrp;
+ u64 size;
+ unsigned int flags;
+
+ addrp = of_get_pci_address(dev, bar, &size, &flags);
+ if (addrp == NULL)
+ return -EINVAL;
+ return __of_address_to_resource(dev, addrp, size, flags, r);
+}
+EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 60dec2401c26..45b8109951fe 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -188,39 +188,19 @@ int is_python(struct device_node *dev)
return 0;
}
-static int get_phb_reg_prop(struct device_node *dev,
- unsigned int addr_size_words,
- struct reg_property64 *reg)
+static void python_countermeasures(struct device_node *dev)
{
- unsigned int *ui_ptr = NULL, len;
-
- /* Found a PHB, now figure out where his registers are mapped. */
- ui_ptr = (unsigned int *)get_property(dev, "reg", &len);
- if (ui_ptr == NULL)
- return 1;
-
- if (addr_size_words == 1) {
- reg->address = ((struct reg_property32 *)ui_ptr)->address;
- reg->size = ((struct reg_property32 *)ui_ptr)->size;
- } else {
- *reg = *((struct reg_property64 *)ui_ptr);
- }
-
- return 0;
-}
-
-static void python_countermeasures(struct device_node *dev,
- unsigned int addr_size_words)
-{
- struct reg_property64 reg_struct;
+ struct resource registers;
void __iomem *chip_regs;
volatile u32 val;
- if (get_phb_reg_prop(dev, addr_size_words, &reg_struct))
+ if (of_address_to_resource(dev, 0, &registers)) {
+ printk(KERN_ERR "Can't get address for Python workarounds !\n");
return;
+ }
/* Python's register file is 1 MB in size. */
- chip_regs = ioremap(reg_struct.address & ~(0xfffffUL), 0x100000);
+ chip_regs = ioremap(registers.start & ~(0xfffffUL), 0x100000);
/*
* Firmware doesn't always clear this bit which is critical
@@ -301,11 +281,10 @@ static int phb_set_bus_ranges(struct device_node *dev,
}
static int __devinit setup_phb(struct device_node *dev,
- struct pci_controller *phb,
- unsigned int addr_size_words)
+ struct pci_controller *phb)
{
if (is_python(dev))
- python_countermeasures(dev, addr_size_words);
+ python_countermeasures(dev);
if (phb_set_bus_ranges(dev, phb))
return 1;
@@ -320,8 +299,8 @@ unsigned long __init find_and_init_phbs(void)
{
struct device_node *node;
struct pci_controller *phb;
- unsigned int root_size_cells = 0;
unsigned int index;
+ unsigned int root_size_cells = 0;
unsigned int *opprop = NULL;
struct device_node *root = of_find_node_by_path("/");
@@ -343,10 +322,11 @@ unsigned long __init find_and_init_phbs(void)
phb = pcibios_alloc_controller(node);
if (!phb)
continue;
- setup_phb(node, phb, root_size_cells);
+ setup_phb(node, phb);
pci_process_bridge_OF_ranges(phb, node, 0);
pci_setup_phb_io(phb, index == 0);
#ifdef CONFIG_PPC_PSERIES
+ /* XXX This code need serious fixing ... --BenH */
if (ppc64_interrupt_controller == IC_OPEN_PIC && pSeries_mpic) {
int addr = root_size_cells * (index + 2) - 1;
mpic_assign_isu(pSeries_mpic, index, opprop[addr]);
@@ -381,22 +361,17 @@ unsigned long __init find_and_init_phbs(void)
struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn)
{
- struct device_node *root = of_find_node_by_path("/");
- unsigned int root_size_cells = 0;
struct pci_controller *phb;
int primary;
- root_size_cells = prom_n_size_cells(root);
-
primary = list_empty(&hose_list);
phb = pcibios_alloc_controller(dn);
if (!phb)
return NULL;
- setup_phb(dn, phb, root_size_cells);
+ setup_phb(dn, phb);
pci_process_bridge_OF_ranges(phb, dn, primary);
pci_setup_phb_io_dynamic(phb, primary);
- of_node_put(root);
pci_devs_phb_init_dynamic(phb);
scan_phb(phb);
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index bd3eb4292b53..d5c52fae023a 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -93,8 +93,8 @@ EXPORT_SYMBOL(ppc_do_canonicalize_irqs);
/* also used by kexec */
void machine_shutdown(void)
{
- if (ppc_md.nvram_sync)
- ppc_md.nvram_sync();
+ if (ppc_md.machine_shutdown)
+ ppc_md.machine_shutdown();
}
void machine_restart(char *cmd)
@@ -294,129 +294,6 @@ struct seq_operations cpuinfo_op = {
.show = show_cpuinfo,
};
-#ifdef CONFIG_PPC_MULTIPLATFORM
-static int __init set_preferred_console(void)
-{
- struct device_node *prom_stdout = NULL;
- char *name;
- u32 *spd;
- int offset = 0;
-
- DBG(" -> set_preferred_console()\n");
-
- /* The user has requested a console so this is already set up. */
- if (strstr(saved_command_line, "console=")) {
- DBG(" console was specified !\n");
- return -EBUSY;
- }
-
- if (!of_chosen) {
- DBG(" of_chosen is NULL !\n");
- return -ENODEV;
- }
- /* We are getting a weird phandle from OF ... */
- /* ... So use the full path instead */
- name = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
- if (name == NULL) {
- DBG(" no linux,stdout-path !\n");
- return -ENODEV;
- }
- prom_stdout = of_find_node_by_path(name);
- if (!prom_stdout) {
- DBG(" can't find stdout package %s !\n", name);
- return -ENODEV;
- }
- DBG("stdout is %s\n", prom_stdout->full_name);
-
- name = (char *)get_property(prom_stdout, "name", NULL);
- if (!name) {
- DBG(" stdout package has no name !\n");
- goto not_found;
- }
- spd = (u32 *)get_property(prom_stdout, "current-speed", NULL);
-
- if (0)
- ;
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- else if (strcmp(name, "serial") == 0) {
- int i;
- u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i);
- if (i > 8) {
- switch (reg[1]) {
- case 0x3f8:
- offset = 0;
- break;
- case 0x2f8:
- offset = 1;
- break;
- case 0x898:
- offset = 2;
- break;
- case 0x890:
- offset = 3;
- break;
- default:
- /* We dont recognise the serial port */
- goto not_found;
- }
- }
- }
-#endif /* CONFIG_SERIAL_8250_CONSOLE */
-#ifdef CONFIG_PPC_PSERIES
- else if (strcmp(name, "vty") == 0) {
- u32 *reg = (u32 *)get_property(prom_stdout, "reg", NULL);
- char *compat = (char *)get_property(prom_stdout, "compatible", NULL);
-
- if (reg && compat && (strcmp(compat, "hvterm-protocol") == 0)) {
- /* Host Virtual Serial Interface */
- switch (reg[0]) {
- case 0x30000000:
- offset = 0;
- break;
- case 0x30000001:
- offset = 1;
- break;
- default:
- goto not_found;
- }
- of_node_put(prom_stdout);
- DBG("Found hvsi console at offset %d\n", offset);
- return add_preferred_console("hvsi", offset, NULL);
- } else {
- /* pSeries LPAR virtual console */
- of_node_put(prom_stdout);
- DBG("Found hvc console\n");
- return add_preferred_console("hvc", 0, NULL);
- }
- }
-#endif /* CONFIG_PPC_PSERIES */
-#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
- else if (strcmp(name, "ch-a") == 0)
- offset = 0;
- else if (strcmp(name, "ch-b") == 0)
- offset = 1;
-#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
- else
- goto not_found;
- of_node_put(prom_stdout);
-
- DBG("Found serial console at ttyS%d\n", offset);
-
- if (spd) {
- static char __initdata opt[16];
- sprintf(opt, "%d", *spd);
- return add_preferred_console("ttyS", offset, opt);
- } else
- return add_preferred_console("ttyS", offset, NULL);
-
- not_found:
- DBG("No preferred console found !\n");
- of_node_put(prom_stdout);
- return -ENODEV;
-}
-console_initcall(set_preferred_console);
-#endif /* CONFIG_PPC_MULTIPLATFORM */
-
void __init check_for_initrd(void)
{
#ifdef CONFIG_BLK_DEV_INITRD
@@ -442,7 +319,7 @@ void __init check_for_initrd(void)
/* If we were passed an initrd, set the ROOT_DEV properly if the values
* look sensible. If not, clear initrd reference.
*/
- if (initrd_start >= KERNELBASE && initrd_end >= KERNELBASE &&
+ if (is_kernel_addr(initrd_start) && is_kernel_addr(initrd_end) &&
initrd_end > initrd_start)
ROOT_DEV = Root_RAM0;
else
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index e5694335bf10..e5d285adb496 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -39,6 +39,8 @@
#include <asm/nvram.h>
#include <asm/xmon.h>
#include <asm/time.h>
+#include <asm/serial.h>
+#include <asm/udbg.h>
#include "setup.h"
@@ -172,12 +174,23 @@ void __init platform_init(void)
*/
void __init machine_init(unsigned long dt_ptr, unsigned long phys)
{
+ /* If btext is enabled, we might have a BAT setup for early display,
+ * thus we do enable some very basic udbg output
+ */
+#ifdef CONFIG_BOOTX_TEXT
+ udbg_putc = btext_drawchar;
+#endif
+
+ /* Do some early initialization based on the flat device tree */
early_init_devtree(__va(dt_ptr));
+ /* Check default command line */
#ifdef CONFIG_CMDLINE
- strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
+ if (cmd_line[0] == 0)
+ strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
#endif /* CONFIG_CMDLINE */
+ /* Base init based on machine type */
platform_init();
#ifdef CONFIG_6xx
@@ -282,25 +295,22 @@ void __init setup_arch(char **cmdline_p)
unflatten_device_tree();
check_for_initrd();
- finish_device_tree();
- smp_setup_cpu_maps();
+ if (ppc_md.init_early)
+ ppc_md.init_early();
-#ifdef CONFIG_BOOTX_TEXT
- init_boot_display();
+#ifdef CONFIG_SERIAL_8250
+ find_legacy_serial_ports();
#endif
+ finish_device_tree();
-#ifdef CONFIG_PPC_PMAC
- /* This could be called "early setup arch", it must be done
- * now because xmon need it
- */
- if (_machine == _MACH_Pmac)
- pmac_feature_init(); /* New cool way */
-#endif
+ smp_setup_cpu_maps();
#ifdef CONFIG_XMON_DEFAULT
xmon_init(1);
#endif
+ /* Register early console */
+ register_early_udbg_console();
#if defined(CONFIG_KGDB)
if (ppc_md.kgdb_map_scc)
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index e3fb78397dc6..98e9f0595dd8 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -34,6 +34,7 @@
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <asm/io.h>
+#include <asm/kdump.h>
#include <asm/prom.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
@@ -268,6 +269,10 @@ void __init early_setup(unsigned long dt_ptr)
}
ppc_md = **mach;
+#ifdef CONFIG_CRASH_DUMP
+ kdump_setup();
+#endif
+
DBG("Found, Initializing memory management...\n");
/*
@@ -317,6 +322,7 @@ void early_setup_secondary(void)
void smp_release_cpus(void)
{
extern unsigned long __secondary_hold_spinloop;
+ unsigned long *ptr;
DBG(" -> smp_release_cpus()\n");
@@ -327,7 +333,9 @@ void smp_release_cpus(void)
* This is useless but harmless on iSeries, secondaries are already
* waiting on their paca spinloops. */
- __secondary_hold_spinloop = 1;
+ ptr = (unsigned long *)((unsigned long)&__secondary_hold_spinloop
+ - PHYSICAL_START);
+ *ptr = 1;
mb();
DBG(" <- smp_release_cpus()\n");
@@ -459,16 +467,21 @@ void __init setup_system(void)
*/
ppc_md.init_early();
+ /*
+ * We can discover serial ports now since the above did setup the
+ * hash table management for us, thus ioremap works. We do that early
+ * so that further code can be debugged
+ */
+#ifdef CONFIG_SERIAL_8250
+ find_legacy_serial_ports();
+#endif
+
/*
* "Finish" the device-tree, that is do the actual parsing of
* some of the properties like the interrupt map
*/
finish_device_tree();
-#ifdef CONFIG_BOOTX_TEXT
- init_boot_display();
-#endif
-
/*
* Initialize xmon
*/
@@ -507,6 +520,9 @@ void __init setup_system(void)
ppc64_caches.iline_size);
printk("htab_address = 0x%p\n", htab_address);
printk("htab_hash_mask = 0x%lx\n", htab_hash_mask);
+#if PHYSICAL_START > 0
+ printk("physical_start = 0x%x\n", PHYSICAL_START);
+#endif
printk("-----------------------------------------------------\n");
mm_init_ppc64();
@@ -657,187 +673,6 @@ void ppc64_terminate_msg(unsigned int src, const char *msg)
printk("[terminate]%04x %s\n", src, msg);
}
-#ifndef CONFIG_PPC_ISERIES
-/*
- * This function can be used by platforms to "find" legacy serial ports.
- * It works for "serial" nodes under an "isa" node, and will try to
- * respect the "ibm,aix-loc" property if any. It works with up to 8
- * ports.
- */
-
-#define MAX_LEGACY_SERIAL_PORTS 8
-static struct plat_serial8250_port serial_ports[MAX_LEGACY_SERIAL_PORTS+1];
-static unsigned int old_serial_count;
-
-void __init generic_find_legacy_serial_ports(u64 *physport,
- unsigned int *default_speed)
-{
- struct device_node *np;
- u32 *sizeprop;
-
- struct isa_reg_property {
- u32 space;
- u32 address;
- u32 size;
- };
- struct pci_reg_property {
- struct pci_address addr;
- u32 size_hi;
- u32 size_lo;
- };
-
- DBG(" -> generic_find_legacy_serial_port()\n");
-
- *physport = 0;
- if (default_speed)
- *default_speed = 0;
-
- np = of_find_node_by_path("/");
- if (!np)
- return;
-
- /* First fill our array */
- for (np = NULL; (np = of_find_node_by_type(np, "serial"));) {
- struct device_node *isa, *pci;
- struct isa_reg_property *reg;
- unsigned long phys_size, addr_size, io_base;
- u32 *rangesp;
- u32 *interrupts, *clk, *spd;
- char *typep;
- int index, rlen, rentsize;
-
- /* Ok, first check if it's under an "isa" parent */
- isa = of_get_parent(np);
- if (!isa || strcmp(isa->name, "isa")) {
- DBG("%s: no isa parent found\n", np->full_name);
- continue;
- }
-
- /* Now look for an "ibm,aix-loc" property that gives us ordering
- * if any...
- */
- typep = (char *)get_property(np, "ibm,aix-loc", NULL);
-
- /* Get the ISA port number */
- reg = (struct isa_reg_property *)get_property(np, "reg", NULL);
- if (reg == NULL)
- goto next_port;
- /* We assume the interrupt number isn't translated ... */
- interrupts = (u32 *)get_property(np, "interrupts", NULL);
- /* get clock freq. if present */
- clk = (u32 *)get_property(np, "clock-frequency", NULL);
- /* get default speed if present */
- spd = (u32 *)get_property(np, "current-speed", NULL);
- /* Default to locate at end of array */
- index = old_serial_count; /* end of the array by default */
-
- /* If we have a location index, then use it */
- if (typep && *typep == 'S') {
- index = simple_strtol(typep+1, NULL, 0) - 1;
- /* if index is out of range, use end of array instead */
- if (index >= MAX_LEGACY_SERIAL_PORTS)
- index = old_serial_count;
- /* if our index is still out of range, that mean that
- * array is full, we could scan for a free slot but that
- * make little sense to bother, just skip the port
- */
- if (index >= MAX_LEGACY_SERIAL_PORTS)
- goto next_port;
- if (index >= old_serial_count)
- old_serial_count = index + 1;
- /* Check if there is a port who already claimed our slot */
- if (serial_ports[index].iobase != 0) {
- /* if we still have some room, move it, else override */
- if (old_serial_count < MAX_LEGACY_SERIAL_PORTS) {
- DBG("Moved legacy port %d -> %d\n", index,
- old_serial_count);
- serial_ports[old_serial_count++] =
- serial_ports[index];
- } else {
- DBG("Replacing legacy port %d\n", index);
- }
- }
- }
- if (index >= MAX_LEGACY_SERIAL_PORTS)
- goto next_port;
- if (index >= old_serial_count)
- old_serial_count = index + 1;
-
- /* Now fill the entry */
- memset(&serial_ports[index], 0, sizeof(struct plat_serial8250_port));
- serial_ports[index].uartclk = clk ? *clk : BASE_BAUD * 16;
- serial_ports[index].iobase = reg->address;
- serial_ports[index].irq = interrupts ? interrupts[0] : 0;
- serial_ports[index].flags = ASYNC_BOOT_AUTOCONF;
-
- DBG("Added legacy port, index: %d, port: %x, irq: %d, clk: %d\n",
- index,
- serial_ports[index].iobase,
- serial_ports[index].irq,
- serial_ports[index].uartclk);
-
- /* Get phys address of IO reg for port 1 */
- if (index != 0)
- goto next_port;
-
- pci = of_get_parent(isa);
- if (!pci) {
- DBG("%s: no pci parent found\n", np->full_name);
- goto next_port;
- }
-
- rangesp = (u32 *)get_property(pci, "ranges", &rlen);
- if (rangesp == NULL) {
- of_node_put(pci);
- goto next_port;
- }
- rlen /= 4;
-
- /* we need the #size-cells of the PCI bridge node itself */
- phys_size = 1;
- sizeprop = (u32 *)get_property(pci, "#size-cells", NULL);
- if (sizeprop != NULL)
- phys_size = *sizeprop;
- /* we need the parent #addr-cells */
- addr_size = prom_n_addr_cells(pci);
- rentsize = 3 + addr_size + phys_size;
- io_base = 0;
- for (;rlen >= rentsize; rlen -= rentsize,rangesp += rentsize) {
- if (((rangesp[0] >> 24) & 0x3) != 1)
- continue; /* not IO space */
- io_base = rangesp[3];
- if (addr_size == 2)
- io_base = (io_base << 32) | rangesp[4];
- }
- if (io_base != 0) {
- *physport = io_base + reg->address;
- if (default_speed && spd)
- *default_speed = *spd;
- }
- of_node_put(pci);
- next_port:
- of_node_put(isa);
- }
-
- DBG(" <- generic_find_legacy_serial_port()\n");
-}
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_ports,
- },
-};
-
-static int __init serial_dev_init(void)
-{
- return platform_device_register(&serial_device);
-}
-arch_initcall(serial_dev_init);
-
-#endif /* CONFIG_PPC_ISERIES */
-
int check_legacy_ioport(unsigned long base_port)
{
if (ppc_md.check_legacy_ioport == NULL)
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index 5a2eba60dd39..d3f0b6d452fb 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -76,7 +76,6 @@
* registers from *regs. This is what we need
* to do when a signal has been delivered.
*/
-#define sigreturn_exit(regs) return 0
#define GP_REGS_SIZE min(sizeof(elf_gregset_t32), sizeof(struct pt_regs32))
#undef __SIGNAL_FRAMESIZE
@@ -156,9 +155,17 @@ static inline int save_general_regs(struct pt_regs *regs,
elf_greg_t64 *gregs = (elf_greg_t64 *)regs;
int i;
- for (i = 0; i <= PT_RESULT; i ++)
+ if (!FULL_REGS(regs)) {
+ set_thread_flag(TIF_SAVE_NVGPRS);
+ current_thread_info()->nvgprs_frame = frame->mc_gregs;
+ }
+
+ for (i = 0; i <= PT_RESULT; i ++) {
+ if (i == 14 && !FULL_REGS(regs))
+ i = 32;
if (__put_user((unsigned int)gregs[i], &frame->mc_gregs[i]))
return -EFAULT;
+ }
return 0;
}
@@ -179,8 +186,6 @@ static inline int restore_general_regs(struct pt_regs *regs,
#else /* CONFIG_PPC64 */
-extern void sigreturn_exit(struct pt_regs *);
-
#define GP_REGS_SIZE min(sizeof(elf_gregset_t), sizeof(struct pt_regs))
static inline int put_sigset_t(sigset_t __user *uset, sigset_t *set)
@@ -214,6 +219,15 @@ static inline int get_old_sigaction(struct k_sigaction *new_ka,
static inline int save_general_regs(struct pt_regs *regs,
struct mcontext __user *frame)
{
+ if (!FULL_REGS(regs)) {
+ /* Zero out the unsaved GPRs to avoid information
+ leak, and set TIF_SAVE_NVGPRS to ensure that the
+ registers do actually get saved later. */
+ memset(&regs->gpr[14], 0, 18 * sizeof(unsigned long));
+ current_thread_info()->nvgprs_frame = &frame->mc_gregs;
+ set_thread_flag(TIF_SAVE_NVGPRS);
+ }
+
return __copy_to_user(&frame->mc_gregs, regs, GP_REGS_SIZE);
}
@@ -256,8 +270,10 @@ long sys_sigsuspend(old_sigset_t mask, int p2, int p3, int p4, int p6, int p7,
while (1) {
current->state = TASK_INTERRUPTIBLE;
schedule();
- if (do_signal(&saveset, regs))
- sigreturn_exit(regs);
+ if (do_signal(&saveset, regs)) {
+ set_thread_flag(TIF_RESTOREALL);
+ return 0;
+ }
}
}
@@ -292,8 +308,10 @@ long sys_rt_sigsuspend(
while (1) {
current->state = TASK_INTERRUPTIBLE;
schedule();
- if (do_signal(&saveset, regs))
- sigreturn_exit(regs);
+ if (do_signal(&saveset, regs)) {
+ set_thread_flag(TIF_RESTOREALL);
+ return 0;
+ }
}
}
@@ -391,9 +409,6 @@ struct rt_sigframe {
static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
int sigret)
{
-#ifdef CONFIG_PPC32
- CHECK_FULL_REGS(regs);
-#endif
/* Make sure floating point registers are stored in regs */
flush_fp_to_thread(current);
@@ -828,12 +843,6 @@ static int handle_rt_signal(unsigned long sig, struct k_sigaction *ka,
regs->gpr[6] = (unsigned long) rt_sf;
regs->nip = (unsigned long) ka->sa.sa_handler;
regs->trap = 0;
-#ifdef CONFIG_PPC64
- regs->result = 0;
-
- if (test_thread_flag(TIF_SINGLESTEP))
- ptrace_notify(SIGTRAP);
-#endif
return 1;
badframe:
@@ -911,8 +920,8 @@ long sys_swapcontext(struct ucontext __user *old_ctx,
*/
if (do_setcontext(new_ctx, regs, 0))
do_exit(SIGSEGV);
- sigreturn_exit(regs);
- /* doesn't actually return back to here */
+
+ set_thread_flag(TIF_RESTOREALL);
return 0;
}
@@ -945,12 +954,11 @@ long sys_rt_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8,
* nobody does any...
*/
compat_sys_sigaltstack((u32)(u64)&rt_sf->uc.uc_stack, 0, 0, 0, 0, 0, regs);
- return (int)regs->result;
#else
do_sigaltstack(&rt_sf->uc.uc_stack, NULL, regs->gpr[1]);
- sigreturn_exit(regs); /* doesn't return here */
- return 0;
#endif
+ set_thread_flag(TIF_RESTOREALL);
+ return 0;
bad:
force_sig(SIGSEGV, current);
@@ -1041,9 +1049,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx,
*/
do_sigaltstack(&ctx->uc_stack, NULL, regs->gpr[1]);
- sigreturn_exit(regs);
- /* doesn't actually return back to here */
-
+ set_thread_flag(TIF_RESTOREALL);
out:
return 0;
}
@@ -1107,12 +1113,6 @@ static int handle_signal(unsigned long sig, struct k_sigaction *ka,
regs->gpr[4] = (unsigned long) sc;
regs->nip = (unsigned long) ka->sa.sa_handler;
regs->trap = 0;
-#ifdef CONFIG_PPC64
- regs->result = 0;
-
- if (test_thread_flag(TIF_SINGLESTEP))
- ptrace_notify(SIGTRAP);
-#endif
return 1;
@@ -1160,12 +1160,8 @@ long sys_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8,
|| restore_user_regs(regs, sr, 1))
goto badframe;
-#ifdef CONFIG_PPC64
- return (int)regs->result;
-#else
- sigreturn_exit(regs); /* doesn't return */
+ set_thread_flag(TIF_RESTOREALL);
return 0;
-#endif
badframe:
force_sig(SIGSEGV, current);
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 1decf2785530..5462bef898f6 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -96,8 +96,10 @@ long sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, int p3, int
while (1) {
current->state = TASK_INTERRUPTIBLE;
schedule();
- if (do_signal(&saveset, regs))
+ if (do_signal(&saveset, regs)) {
+ set_thread_flag(TIF_RESTOREALL);
return 0;
+ }
}
}
@@ -152,6 +154,14 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
err |= __put_user(0, &sc->v_regs);
#endif /* CONFIG_ALTIVEC */
err |= __put_user(&sc->gp_regs, &sc->regs);
+ if (!FULL_REGS(regs)) {
+ /* Zero out the unsaved GPRs to avoid information
+ leak, and set TIF_SAVE_NVGPRS to ensure that the
+ registers do actually get saved later. */
+ memset(&regs->gpr[14], 0, 18 * sizeof(unsigned long));
+ set_thread_flag(TIF_SAVE_NVGPRS);
+ current_thread_info()->nvgprs_frame = &sc->gp_regs;
+ }
err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE);
err |= __copy_to_user(&sc->fp_regs, &current->thread.fpr, FP_REGS_SIZE);
err |= __put_user(signr, &sc->signal);
@@ -340,6 +350,7 @@ int sys_swapcontext(struct ucontext __user *old_ctx,
do_exit(SIGSEGV);
/* This returns like rt_sigreturn */
+ set_thread_flag(TIF_RESTOREALL);
return 0;
}
@@ -372,7 +383,8 @@ int sys_rt_sigreturn(unsigned long r3, unsigned long r4, unsigned long r5,
*/
do_sigaltstack(&uc->uc_stack, NULL, regs->gpr[1]);
- return regs->result;
+ set_thread_flag(TIF_RESTOREALL);
+ return 0;
badframe:
#if DEBUG_SIG
@@ -454,9 +466,6 @@ static int setup_rt_frame(int signr, struct k_sigaction *ka, siginfo_t *info,
if (err)
goto badframe;
- if (test_thread_flag(TIF_SINGLESTEP))
- ptrace_notify(SIGTRAP);
-
return 1;
badframe:
@@ -502,6 +511,8 @@ static inline void syscall_restart(struct pt_regs *regs, struct k_sigaction *ka)
* we only get here if there is a handler, we dont restart.
*/
regs->result = -EINTR;
+ regs->gpr[3] = EINTR;
+ regs->ccr |= 0x10000000;
break;
case -ERESTARTSYS:
/* ERESTARTSYS means to restart the syscall if there is no
@@ -509,6 +520,8 @@ static inline void syscall_restart(struct pt_regs *regs, struct k_sigaction *ka)
*/
if (!(ka->sa.sa_flags & SA_RESTART)) {
regs->result = -EINTR;
+ regs->gpr[3] = EINTR;
+ regs->ccr |= 0x10000000;
break;
}
/* fallthrough */
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 30374d2f88e5..d381ec90b759 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -31,6 +31,7 @@
#include <linux/sysdev.h>
#include <linux/cpu.h>
#include <linux/notifier.h>
+#include <linux/topology.h>
#include <asm/ptrace.h>
#include <asm/atomic.h>
@@ -75,6 +76,8 @@ void smp_call_function_interrupt(void);
int smt_enabled_at_boot = 1;
+static void (*crash_ipi_function_ptr)(struct pt_regs *) = NULL;
+
#ifdef CONFIG_MPIC
int __init smp_mpic_probe(void)
{
@@ -123,11 +126,16 @@ void smp_message_recv(int msg, struct pt_regs *regs)
/* XXX Do we have to do this? */
set_need_resched();
break;
-#ifdef CONFIG_DEBUGGER
case PPC_MSG_DEBUGGER_BREAK:
+ if (crash_ipi_function_ptr) {
+ crash_ipi_function_ptr(regs);
+ break;
+ }
+#ifdef CONFIG_DEBUGGER
debugger_ipi(regs);
break;
-#endif
+#endif /* CONFIG_DEBUGGER */
+ /* FALLTHROUGH */
default:
printk("SMP %d: smp_message_recv(): unknown msg %d\n",
smp_processor_id(), msg);
@@ -147,6 +155,17 @@ void smp_send_debugger_break(int cpu)
}
#endif
+#ifdef CONFIG_KEXEC
+void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *))
+{
+ crash_ipi_function_ptr = crash_ipi_callback;
+ if (crash_ipi_callback) {
+ mb();
+ smp_ops->message_pass(MSG_ALL_BUT_SELF, PPC_MSG_DEBUGGER_BREAK);
+ }
+}
+#endif
+
static void stop_this_cpu(void *dummy)
{
local_irq_disable();
@@ -452,10 +471,6 @@ int __devinit __cpu_up(unsigned int cpu)
if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu))
return -EINVAL;
-#ifdef CONFIG_PPC64
- paca[cpu].default_decr = tb_ticks_per_jiffy;
-#endif
-
/* Make sure callin-map entry is 0 (can be leftover a CPU
* hotplug
*/
@@ -554,6 +569,8 @@ void __init smp_cpus_done(unsigned int max_cpus)
smp_ops->setup_cpu(boot_cpuid);
set_cpus_allowed(current, old_mask);
+
+ dump_numa_cpu_topology();
}
#ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c
index 91b93d917b64..ad895c99813b 100644
--- a/arch/powerpc/kernel/syscalls.c
+++ b/arch/powerpc/kernel/syscalls.c
@@ -43,9 +43,6 @@
#include <asm/time.h>
#include <asm/unistd.h>
-extern unsigned long wall_jiffies;
-
-
/*
* sys_ipc() is the de-multiplexer for the SysV IPC calls..
*
@@ -311,31 +308,6 @@ int sys_olduname(struct oldold_utsname __user *name)
return error? -EFAULT: 0;
}
-#ifdef CONFIG_PPC64
-time_t sys64_time(time_t __user * tloc)
-{
- time_t secs;
- time_t usecs;
-
- long tb_delta = tb_ticks_since(tb_last_stamp);
- tb_delta += (jiffies - wall_jiffies) * tb_ticks_per_jiffy;
-
- secs = xtime.tv_sec;
- usecs = (xtime.tv_nsec/1000) + tb_delta / tb_ticks_per_usec;
- while (usecs >= USEC_PER_SEC) {
- ++secs;
- usecs -= USEC_PER_SEC;
- }
-
- if (tloc) {
- if (put_user(secs,tloc))
- secs = -EFAULT;
- }
-
- return secs;
-}
-#endif
-
long ppc_fadvise64_64(int fd, int advice, u32 offset_high, u32 offset_low,
u32 len_high, u32 len_low)
{
diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S
index 65eaea91b499..65463a1076e8 100644
--- a/arch/powerpc/kernel/systbl.S
+++ b/arch/powerpc/kernel/systbl.S
@@ -54,7 +54,7 @@ SYSCALL(link)
SYSCALL(unlink)
COMPAT_SYS(execve)
SYSCALL(chdir)
-SYSX(sys64_time,compat_sys_time,sys_time)
+COMPAT_SYS(time)
SYSCALL(mknod)
SYSCALL(chmod)
SYSCALL(lchown)
@@ -113,7 +113,7 @@ SYSCALL(sgetmask)
COMPAT_SYS(ssetmask)
SYSCALL(setreuid)
SYSCALL(setregid)
-SYSX(sys_ni_syscall,ppc32_sigsuspend,ppc_sigsuspend)
+SYS32ONLY(sigsuspend)
COMPAT_SYS(sigpending)
COMPAT_SYS(sethostname)
COMPAT_SYS(setrlimit)
@@ -160,7 +160,7 @@ SYSCALL(swapoff)
COMPAT_SYS(sysinfo)
COMPAT_SYS(ipc)
SYSCALL(fsync)
-SYSX(sys_ni_syscall,ppc32_sigreturn,sys_sigreturn)
+SYS32ONLY(sigreturn)
PPC_SYS(clone)
COMPAT_SYS(setdomainname)
PPC_SYS(newuname)
@@ -213,13 +213,13 @@ COMPAT_SYS(nfsservctl)
SYSCALL(setresgid)
SYSCALL(getresgid)
COMPAT_SYS(prctl)
-SYSX(ppc64_rt_sigreturn,ppc32_rt_sigreturn,sys_rt_sigreturn)
+COMPAT_SYS(rt_sigreturn)
COMPAT_SYS(rt_sigaction)
COMPAT_SYS(rt_sigprocmask)
COMPAT_SYS(rt_sigpending)
COMPAT_SYS(rt_sigtimedwait)
COMPAT_SYS(rt_sigqueueinfo)
-SYSX(ppc64_rt_sigsuspend,ppc32_rt_sigsuspend,ppc_rt_sigsuspend)
+COMPAT_SYS(rt_sigsuspend)
COMPAT_SYS(pread64)
COMPAT_SYS(pwrite64)
SYSCALL(chown)
@@ -290,7 +290,7 @@ COMPAT_SYS(clock_settime)
COMPAT_SYS(clock_gettime)
COMPAT_SYS(clock_getres)
COMPAT_SYS(clock_nanosleep)
-SYSX(ppc64_swapcontext,ppc32_swapcontext,ppc_swapcontext)
+COMPAT_SYS(swapcontext)
COMPAT_SYS(tgkill)
COMPAT_SYS(utimes)
COMPAT_SYS(statfs64)
@@ -319,3 +319,5 @@ COMPAT_SYS(ioprio_get)
SYSCALL(inotify_init)
SYSCALL(inotify_add_watch)
SYSCALL(inotify_rm_watch)
+SYSCALL(spu_run)
+SYSCALL(spu_create)
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index de8479769bb7..56f50e91bddb 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -699,10 +699,6 @@ void __init time_init(void)
div128_by_32(1024*1024, 0, tb_ticks_per_sec, &res);
tb_to_xs = res.result_low;
-#ifdef CONFIG_PPC64
- get_paca()->default_decr = tb_ticks_per_jiffy;
-#endif
-
/*
* Compute scale factor for sched_clock.
* The calibrate_decr() function has set tb_ticks_per_sec,
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 1511454c4690..7509aa6474f2 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -31,6 +31,7 @@
#include <linux/prctl.h>
#include <linux/delay.h>
#include <linux/kprobes.h>
+#include <linux/kexec.h>
#include <asm/kdebug.h>
#include <asm/pgtable.h>
@@ -95,7 +96,7 @@ static DEFINE_SPINLOCK(die_lock);
int die(const char *str, struct pt_regs *regs, long err)
{
- static int die_counter;
+ static int die_counter, crash_dump_start = 0;
int nl = 0;
if (debugger(regs))
@@ -156,7 +157,21 @@ int die(const char *str, struct pt_regs *regs, long err)
print_modules();
show_regs(regs);
bust_spinlocks(0);
+
+ if (!crash_dump_start && kexec_should_crash(current)) {
+ crash_dump_start = 1;
+ spin_unlock_irq(&die_lock);
+ crash_kexec(regs);
+ /* NOTREACHED */
+ }
spin_unlock_irq(&die_lock);
+ if (crash_dump_start)
+ /*
+ * Only for soft-reset: Other CPUs will be responded to an IPI
+ * sent by first kexec CPU.
+ */
+ for(;;)
+ ;
if (in_interrupt())
panic("Fatal exception in interrupt");
@@ -215,8 +230,10 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
void system_reset_exception(struct pt_regs *regs)
{
/* See if any machine dependent calls */
- if (ppc_md.system_reset_exception)
- ppc_md.system_reset_exception(regs);
+ if (ppc_md.system_reset_exception) {
+ if (ppc_md.system_reset_exception(regs))
+ return;
+ }
die("System Reset", regs, SIGABRT);
@@ -886,12 +903,10 @@ void altivec_unavailable_exception(struct pt_regs *regs)
die("Unrecoverable VMX/Altivec Unavailable Exception", regs, SIGABRT);
}
-#if defined(CONFIG_PPC64) || defined(CONFIG_E500)
void performance_monitor_exception(struct pt_regs *regs)
{
perf_irq(regs);
}
-#endif
#ifdef CONFIG_8xx
void SoftwareEmulation(struct pt_regs *regs)
diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index 0d878e72fc44..558c1ceb2b93 100644
--- a/arch/powerpc/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -16,8 +16,8 @@
#include <linux/console.h>
#include <asm/processor.h>
-void (*udbg_putc)(unsigned char c);
-unsigned char (*udbg_getc)(void);
+void (*udbg_putc)(char c);
+int (*udbg_getc)(void);
int (*udbg_getc_poll)(void);
/* udbg library, used by xmon et al */
@@ -57,8 +57,8 @@ int udbg_write(const char *s, int n)
int udbg_read(char *buf, int buflen)
{
- char c, *p = buf;
- int i;
+ char *p = buf;
+ int i, c;
if (!udbg_getc)
return 0;
@@ -66,8 +66,11 @@ int udbg_read(char *buf, int buflen)
for (i = 0; i < buflen; ++i) {
do {
c = udbg_getc();
+ if (c == -1 && i == 0)
+ return -1;
+
} while (c == 0x11 || c == 0x13);
- if (c == 0)
+ if (c == 0 || c == -1)
break;
*p++ = c;
}
@@ -78,7 +81,7 @@ int udbg_read(char *buf, int buflen)
#define UDBG_BUFSIZE 256
void udbg_printf(const char *fmt, ...)
{
- unsigned char buf[UDBG_BUFSIZE];
+ char buf[UDBG_BUFSIZE];
va_list args;
va_start(args, fmt);
@@ -87,6 +90,12 @@ void udbg_printf(const char *fmt, ...)
va_end(args);
}
+void __init udbg_progress(char *s, unsigned short hex)
+{
+ udbg_puts(s);
+ udbg_puts("\n");
+}
+
/*
* Early boot console based on udbg
*/
@@ -99,7 +108,7 @@ static void udbg_console_write(struct console *con, const char *s,
static struct console udbg_console = {
.name = "udbg",
.write = udbg_console_write,
- .flags = CON_PRINTBUFFER,
+ .flags = CON_PRINTBUFFER | CON_ENABLED,
.index = -1,
};
@@ -107,15 +116,19 @@ static int early_console_initialized;
void __init disable_early_printk(void)
{
+#if 1
if (!early_console_initialized)
return;
unregister_console(&udbg_console);
early_console_initialized = 0;
+#endif
}
/* called by setup_system */
void register_early_udbg_console(void)
{
+ if (early_console_initialized)
+ return;
early_console_initialized = 1;
register_console(&udbg_console);
}
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 9313574ab935..7541bf44d2da 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -43,9 +43,11 @@ struct NS16550 {
#define LSR_TEMT 0x40 /* Xmitter empty */
#define LSR_ERR 0x80 /* Error */
+#define LCR_DLAB 0x80
+
static volatile struct NS16550 __iomem *udbg_comport;
-static void udbg_550_putc(unsigned char c)
+static void udbg_550_putc(char c)
{
if (udbg_comport) {
while ((in_8(&udbg_comport->lsr) & LSR_THRE) == 0)
@@ -67,39 +69,80 @@ static int udbg_550_getc_poll(void)
return -1;
}
-static unsigned char udbg_550_getc(void)
+static int udbg_550_getc(void)
{
if (udbg_comport) {
while ((in_8(&udbg_comport->lsr) & LSR_DR) == 0)
/* wait for char */;
return in_8(&udbg_comport->rbr);
}
- return 0;
+ return -1;
}
-void udbg_init_uart(void __iomem *comport, unsigned int speed)
+void udbg_init_uart(void __iomem *comport, unsigned int speed,
+ unsigned int clock)
{
- u16 dll = speed ? (115200 / speed) : 12;
+ unsigned int dll, base_bauds = clock / 16;
+
+ if (speed == 0)
+ speed = 9600;
+ dll = base_bauds / speed;
if (comport) {
udbg_comport = (struct NS16550 __iomem *)comport;
out_8(&udbg_comport->lcr, 0x00);
out_8(&udbg_comport->ier, 0xff);
out_8(&udbg_comport->ier, 0x00);
- out_8(&udbg_comport->lcr, 0x80); /* Access baud rate */
- out_8(&udbg_comport->dll, dll & 0xff); /* 1 = 115200, 2 = 57600,
- 3 = 38400, 12 = 9600 baud */
- out_8(&udbg_comport->dlm, dll >> 8); /* dll >> 8 which should be zero
- for fast rates; */
- out_8(&udbg_comport->lcr, 0x03); /* 8 data, 1 stop, no parity */
- out_8(&udbg_comport->mcr, 0x03); /* RTS/DTR */
- out_8(&udbg_comport->fcr ,0x07); /* Clear & enable FIFOs */
+ out_8(&udbg_comport->lcr, LCR_DLAB);
+ out_8(&udbg_comport->dll, dll & 0xff);
+ out_8(&udbg_comport->dlm, dll >> 8);
+ /* 8 data, 1 stop, no parity */
+ out_8(&udbg_comport->lcr, 0x03);
+ /* RTS/DTR */
+ out_8(&udbg_comport->mcr, 0x03);
+ /* Clear & enable FIFOs */
+ out_8(&udbg_comport->fcr ,0x07);
udbg_putc = udbg_550_putc;
udbg_getc = udbg_550_getc;
udbg_getc_poll = udbg_550_getc_poll;
}
}
+unsigned int udbg_probe_uart_speed(void __iomem *comport, unsigned int clock)
+{
+ unsigned int dll, dlm, divisor, prescaler, speed;
+ u8 old_lcr;
+ volatile struct NS16550 __iomem *port = comport;
+
+ old_lcr = in_8(&port->lcr);
+
+ /* select divisor latch registers. */
+ out_8(&port->lcr, LCR_DLAB);
+
+ /* now, read the divisor */
+ dll = in_8(&port->dll);
+ dlm = in_8(&port->dlm);
+ divisor = dlm << 8 | dll;
+
+ /* check prescaling */
+ if (in_8(&port->mcr) & 0x80)
+ prescaler = 4;
+ else
+ prescaler = 1;
+
+ /* restore the LCR */
+ out_8(&port->lcr, old_lcr);
+
+ /* calculate speed */
+ speed = (clock / prescaler) / (divisor * 16);
+
+ /* sanity check */
+ if (speed < 0 || speed > (clock / 16))
+ speed = 9600;
+
+ return speed;
+}
+
#ifdef CONFIG_PPC_MAPLE
void udbg_maple_real_putc(unsigned char c)
{
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 93d4fbfdb724..a4815d316722 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -81,7 +81,8 @@ static int store_updates_sp(struct pt_regs *regs)
}
#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-static void do_dabr(struct pt_regs *regs, unsigned long error_code)
+static void do_dabr(struct pt_regs *regs, unsigned long address,
+ unsigned long error_code)
{
siginfo_t info;
@@ -99,7 +100,7 @@ static void do_dabr(struct pt_regs *regs, unsigned long error_code)
info.si_signo = SIGTRAP;
info.si_errno = 0;
info.si_code = TRAP_HWBKPT;
- info.si_addr = (void __user *)regs->nip;
+ info.si_addr = (void __user *)address;
force_sig_info(SIGTRAP, &info, current);
}
#endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/
@@ -159,7 +160,7 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address,
#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
if (error_code & DSISR_DABRMATCH) {
/* DABR match */
- do_dabr(regs, error_code);
+ do_dabr(regs, address, error_code);
return 0;
}
#endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index a606504678bd..5bb433cbe41b 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -456,7 +456,7 @@ void __init htab_initialize(void)
/* create bolted the linear mapping in the hash table */
for (i=0; i < lmb.memory.cnt; i++) {
- base = lmb.memory.region[i].base + KERNELBASE;
+ base = (unsigned long)__va(lmb.memory.region[i].base);
size = lmb.memory.region[i].size;
DBG("creating mapping for region: %lx : %lx\n", base, size);
@@ -498,8 +498,8 @@ void __init htab_initialize(void)
* for either 4K or 16MB pages.
*/
if (tce_alloc_start) {
- tce_alloc_start += KERNELBASE;
- tce_alloc_end += KERNELBASE;
+ tce_alloc_start = (unsigned long)__va(tce_alloc_start);
+ tce_alloc_end = (unsigned long)__va(tce_alloc_end);
if (base + size >= tce_alloc_start)
tce_alloc_start = base + size + 1;
@@ -644,6 +644,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
DBG_LOW(" -> rc=%d\n", rc);
return rc;
}
+EXPORT_SYMBOL_GPL(hash_page);
void hash_preload(struct mm_struct *mm, unsigned long ea,
unsigned long access, unsigned long trap)
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 54131b877da3..b51bb28c054b 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -549,6 +549,17 @@ fail:
return addr;
}
+static int htlb_check_hinted_area(unsigned long addr, unsigned long len)
+{
+ struct vm_area_struct *vma;
+
+ vma = find_vma(current->mm, addr);
+ if (!vma || ((addr + len) <= vma->vm_start))
+ return 0;
+
+ return -ENOMEM;
+}
+
static unsigned long htlb_get_low_area(unsigned long len, u16 segmask)
{
unsigned long addr = 0;
@@ -618,15 +629,28 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
if (!cpu_has_feature(CPU_FTR_16M_PAGE))
return -EINVAL;
+ /* Paranoia, caller should have dealt with this */
+ BUG_ON((addr + len) < addr);
+
if (test_thread_flag(TIF_32BIT)) {
+ /* Paranoia, caller should have dealt with this */
+ BUG_ON((addr + len) > 0x100000000UL);
+
curareas = current->mm->context.low_htlb_areas;
- /* First see if we can do the mapping in the existing
- * low areas */
+ /* First see if we can use the hint address */
+ if (addr && (htlb_check_hinted_area(addr, len) == 0)) {
+ areamask = LOW_ESID_MASK(addr, len);
+ if (open_low_hpage_areas(current->mm, areamask) == 0)
+ return addr;
+ }
+
+ /* Next see if we can map in the existing low areas */
addr = htlb_get_low_area(len, curareas);
if (addr != -ENOMEM)
return addr;
+ /* Finally go looking for areas to open */
lastshift = 0;
for (areamask = LOW_ESID_MASK(0x100000000UL-len, len);
! lastshift; areamask >>=1) {
@@ -641,12 +665,22 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
} else {
curareas = current->mm->context.high_htlb_areas;
- /* First see if we can do the mapping in the existing
- * high areas */
+ /* First see if we can use the hint address */
+ /* We discourage 64-bit processes from doing hugepage
+ * mappings below 4GB (must use MAP_FIXED) */
+ if ((addr >= 0x100000000UL)
+ && (htlb_check_hinted_area(addr, len) == 0)) {
+ areamask = HTLB_AREA_MASK(addr, len);
+ if (open_high_hpage_areas(current->mm, areamask) == 0)
+ return addr;
+ }
+
+ /* Next see if we can map in the existing high areas */
addr = htlb_get_high_area(len, curareas);
if (addr != -ENOMEM)
return addr;
+ /* Finally go looking for areas to open */
lastshift = 0;
for (areamask = HTLB_AREA_MASK(TASK_SIZE_USER64-len, len);
! lastshift; areamask >>=1) {
diff --git a/arch/powerpc/mm/imalloc.c b/arch/powerpc/mm/imalloc.c
index f9587bcc6a48..8b0c132bc163 100644
--- a/arch/powerpc/mm/imalloc.c
+++ b/arch/powerpc/mm/imalloc.c
@@ -107,6 +107,7 @@ static int im_region_status(unsigned long v_addr, unsigned long size,
if (v_addr < (unsigned long) tmp->addr + tmp->size)
break;
+ *vm = NULL;
if (tmp) {
if (im_region_overlaps(v_addr, size, tmp))
return IM_REGION_OVERLAP;
@@ -127,7 +128,6 @@ static int im_region_status(unsigned long v_addr, unsigned long size,
}
}
- *vm = NULL;
return IM_REGION_UNUSED;
}
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 7d4b8b5f0606..7d0d75c11848 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -188,6 +188,11 @@ void __init MMU_init(void)
if (ppc_md.progress)
ppc_md.progress("MMU:exit", 0x211);
+
+ /* From now on, btext is no longer BAT mapped if it was at all */
+#ifdef CONFIG_BOOTX_TEXT
+ btext_unmap();
+#endif
}
/* This is only called until mem_init is done. */
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index ed6ed2e30dac..15aac0d78dfa 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -114,19 +114,18 @@ void online_page(struct page *page)
num_physpages++;
}
-/*
- * This works only for the non-NUMA case. Later, we'll need a lookup
- * to convert from real physical addresses to nid, that doesn't use
- * pfn_to_nid().
- */
int __devinit add_memory(u64 start, u64 size)
{
- struct pglist_data *pgdata = NODE_DATA(0);
+ struct pglist_data *pgdata;
struct zone *zone;
+ int nid;
unsigned long start_pfn = start >> PAGE_SHIFT;
unsigned long nr_pages = size >> PAGE_SHIFT;
- start += KERNELBASE;
+ nid = hot_add_scn_to_nid(start);
+ pgdata = NODE_DATA(nid);
+
+ start = __va(start);
create_section_mapping(start, start + size);
/* this should work for most non-highmem platforms */
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index ba7a3055a9fc..2863a912bcd0 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -37,6 +37,7 @@ EXPORT_SYMBOL(node_data);
static bootmem_data_t __initdata plat_node_bdata[MAX_NUMNODES];
static int min_common_depth;
+static int n_mem_addr_cells, n_mem_size_cells;
/*
* We need somewhere to store start/end/node for each region until we have
@@ -254,32 +255,20 @@ static int __init find_min_common_depth(void)
return depth;
}
-static int __init get_mem_addr_cells(void)
+static void __init get_n_mem_cells(int *n_addr_cells, int *n_size_cells)
{
struct device_node *memory = NULL;
- int rc;
memory = of_find_node_by_type(memory, "memory");
if (!memory)
- return 0; /* it won't matter */
+ panic("numa.c: No memory nodes found!");
- rc = prom_n_addr_cells(memory);
- return rc;
+ *n_addr_cells = prom_n_addr_cells(memory);
+ *n_size_cells = prom_n_size_cells(memory);
+ of_node_put(memory);
}
-static int __init get_mem_size_cells(void)
-{
- struct device_node *memory = NULL;
- int rc;
-
- memory = of_find_node_by_type(memory, "memory");
- if (!memory)
- return 0; /* it won't matter */
- rc = prom_n_size_cells(memory);
- return rc;
-}
-
-static unsigned long __init read_n_cells(int n, unsigned int **buf)
+static unsigned long __devinit read_n_cells(int n, unsigned int **buf)
{
unsigned long result = 0;
@@ -386,7 +375,6 @@ static int __init parse_numa_properties(void)
{
struct device_node *cpu = NULL;
struct device_node *memory = NULL;
- int addr_cells, size_cells;
int max_domain;
unsigned long i;
@@ -425,8 +413,7 @@ static int __init parse_numa_properties(void)
}
}
- addr_cells = get_mem_addr_cells();
- size_cells = get_mem_size_cells();
+ get_n_mem_cells(&n_mem_addr_cells, &n_mem_size_cells);
memory = NULL;
while ((memory = of_find_node_by_type(memory, "memory")) != NULL) {
unsigned long start;
@@ -436,15 +423,21 @@ static int __init parse_numa_properties(void)
unsigned int *memcell_buf;
unsigned int len;
- memcell_buf = (unsigned int *)get_property(memory, "reg", &len);
+ memcell_buf = (unsigned int *)get_property(memory,
+ "linux,usable-memory", &len);
+ if (!memcell_buf || len <= 0)
+ memcell_buf =
+ (unsigned int *)get_property(memory, "reg",
+ &len);
if (!memcell_buf || len <= 0)
continue;
- ranges = memory->n_addrs;
+ /* ranges in cell */
+ ranges = (len >> 2) / (n_mem_addr_cells + n_mem_size_cells);
new_range:
/* these are order-sensitive, and modify the buffer pointer */
- start = read_n_cells(addr_cells, &memcell_buf);
- size = read_n_cells(size_cells, &memcell_buf);
+ start = read_n_cells(n_mem_addr_cells, &memcell_buf);
+ size = read_n_cells(n_mem_size_cells, &memcell_buf);
numa_domain = of_node_numa_domain(memory);
@@ -497,7 +490,41 @@ static void __init setup_nonnuma(void)
node_set_online(0);
}
-static void __init dump_numa_topology(void)
+void __init dump_numa_cpu_topology(void)
+{
+ unsigned int node;
+ unsigned int cpu, count;
+
+ if (min_common_depth == -1 || !numa_enabled)
+ return;
+
+ for_each_online_node(node) {
+ printk(KERN_INFO "Node %d CPUs:", node);
+
+ count = 0;
+ /*
+ * If we used a CPU iterator here we would miss printing
+ * the holes in the cpumap.
+ */
+ for (cpu = 0; cpu < NR_CPUS; cpu++) {
+ if (cpu_isset(cpu, numa_cpumask_lookup_table[node])) {
+ if (count == 0)
+ printk(" %u", cpu);
+ ++count;
+ } else {
+ if (count > 1)
+ printk("-%u", cpu - 1);
+ count = 0;
+ }
+ }
+
+ if (count > 1)
+ printk("-%u", NR_CPUS - 1);
+ printk("\n");
+ }
+}
+
+static void __init dump_numa_memory_topology(void)
{
unsigned int node;
unsigned int count;
@@ -529,7 +556,6 @@ static void __init dump_numa_topology(void)
printk("-0x%lx", i);
printk("\n");
}
- return;
}
/*
@@ -591,7 +617,7 @@ void __init do_init_bootmem(void)
if (parse_numa_properties())
setup_nonnuma();
else
- dump_numa_topology();
+ dump_numa_memory_topology();
register_cpu_notifier(&ppc64_numa_nb);
@@ -730,3 +756,60 @@ static int __init early_numa(char *p)
return 0;
}
early_param("numa", early_numa);
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+/*
+ * Find the node associated with a hot added memory section. Section
+ * corresponds to a SPARSEMEM section, not an LMB. It is assumed that
+ * sections are fully contained within a single LMB.
+ */
+int hot_add_scn_to_nid(unsigned long scn_addr)
+{
+ struct device_node *memory = NULL;
+ nodemask_t nodes;
+ int numa_domain = 0;
+
+ if (!numa_enabled || (min_common_depth < 0))
+ return numa_domain;
+
+ while ((memory = of_find_node_by_type(memory, "memory")) != NULL) {
+ unsigned long start, size;
+ int ranges;
+ unsigned int *memcell_buf;
+ unsigned int len;
+
+ memcell_buf = (unsigned int *)get_property(memory, "reg", &len);
+ if (!memcell_buf || len <= 0)
+ continue;
+
+ /* ranges in cell */
+ ranges = (len >> 2) / (n_mem_addr_cells + n_mem_size_cells);
+ha_new_range:
+ start = read_n_cells(n_mem_addr_cells, &memcell_buf);
+ size = read_n_cells(n_mem_size_cells, &memcell_buf);
+ numa_domain = of_node_numa_domain(memory);
+
+ /* Domains not present at boot default to 0 */
+ if (!node_online(numa_domain))
+ numa_domain = any_online_node(NODE_MASK_ALL);
+
+ if ((scn_addr >= start) && (scn_addr < (start + size))) {
+ of_node_put(memory);
+ goto got_numa_domain;
+ }
+
+ if (--ranges) /* process all ranges in cell */
+ goto ha_new_range;
+ }
+ BUG(); /* section address should be found above */
+
+ /* Temporary code to ensure that returned node is not empty */
+got_numa_domain:
+ nodes_setall(nodes);
+ while (NODE_DATA(numa_domain)->node_spanned_pages == 0) {
+ node_clear(numa_domain, nodes);
+ numa_domain = any_online_node(nodes);
+ }
+ return numa_domain;
+}
+#endif /* CONFIG_MEMORY_HOTPLUG */
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 60e852f2f8e5..ffc8ed4de62d 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -75,7 +75,7 @@ static void slb_flush_and_rebolt(void)
vflags = SLB_VSID_KERNEL | virtual_llp;
ksp_esid_data = mk_esid_data(get_paca()->kstack, 2);
- if ((ksp_esid_data & ESID_MASK) == KERNELBASE)
+ if ((ksp_esid_data & ESID_MASK) == PAGE_OFFSET)
ksp_esid_data &= ~SLB_ESID_V;
/* We need to do this all in asm, so we're sure we don't touch
@@ -87,8 +87,8 @@ static void slb_flush_and_rebolt(void)
/* Slot 2 - kernel stack */
"slbmte %2,%3\n"
"isync"
- :: "r"(mk_vsid_data(VMALLOCBASE, vflags)),
- "r"(mk_esid_data(VMALLOCBASE, 1)),
+ :: "r"(mk_vsid_data(VMALLOC_START, vflags)),
+ "r"(mk_esid_data(VMALLOC_START, 1)),
"r"(mk_vsid_data(ksp_esid_data, lflags)),
"r"(ksp_esid_data)
: "memory");
@@ -134,14 +134,14 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
else
unmapped_base = TASK_UNMAPPED_BASE_USER64;
- if (pc >= KERNELBASE)
+ if (is_kernel_addr(pc))
return;
slb_allocate(pc);
if (GET_ESID(pc) == GET_ESID(stack))
return;
- if (stack >= KERNELBASE)
+ if (is_kernel_addr(stack))
return;
slb_allocate(stack);
@@ -149,7 +149,7 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
|| (GET_ESID(stack) == GET_ESID(unmapped_base)))
return;
- if (unmapped_base >= KERNELBASE)
+ if (is_kernel_addr(unmapped_base))
return;
slb_allocate(unmapped_base);
}
@@ -213,10 +213,10 @@ void slb_initialize(void)
asm volatile("isync":::"memory");
asm volatile("slbmte %0,%0"::"r" (0) : "memory");
asm volatile("isync; slbia; isync":::"memory");
- create_slbe(KERNELBASE, lflags, 0);
+ create_slbe(PAGE_OFFSET, lflags, 0);
/* VMALLOC space has 4K pages always for now */
- create_slbe(VMALLOCBASE, vflags, 1);
+ create_slbe(VMALLOC_START, vflags, 1);
/* We don't bolt the stack for the time being - we're in boot,
* so the stack is in the bolted segment. By the time it goes
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index 950ffc5848c7..d1acee38f163 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -37,9 +37,9 @@ _GLOBAL(slb_allocate_realmode)
srdi r9,r3,60 /* get region */
srdi r10,r3,28 /* get esid */
- cmpldi cr7,r9,0xc /* cmp KERNELBASE for later use */
+ cmpldi cr7,r9,0xc /* cmp PAGE_OFFSET for later use */
- /* r3 = address, r10 = esid, cr7 = <>KERNELBASE */
+ /* r3 = address, r10 = esid, cr7 = <> PAGE_OFFSET */
blt cr7,0f /* user or kernel? */
/* kernel address: proto-VSID = ESID */
@@ -166,7 +166,7 @@ _GLOBAL(slb_allocate_user)
/*
* Finish loading of an SLB entry and return
*
- * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9, cr7 = <>KERNELBASE
+ * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET
*/
slb_finish_load:
ASM_VSID_SCRAMBLE(r10,r9)
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index 51e7951414e5..82e4951826bc 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -40,7 +40,7 @@ static int make_ste(unsigned long stab, unsigned long esid, unsigned long vsid)
unsigned long entry, group, old_esid, castout_entry, i;
unsigned int global_entry;
struct stab_entry *ste, *castout_ste;
- unsigned long kernel_segment = (esid << SID_SHIFT) >= KERNELBASE;
+ unsigned long kernel_segment = (esid << SID_SHIFT) >= PAGE_OFFSET;
vsid_data = vsid << STE_VSID_SHIFT;
esid_data = esid << SID_SHIFT | STE_ESID_KP | STE_ESID_V;
@@ -83,7 +83,7 @@ static int make_ste(unsigned long stab, unsigned long esid, unsigned long vsid)
}
/* Dont cast out the first kernel segment */
- if ((castout_ste->esid_data & ESID_MASK) != KERNELBASE)
+ if ((castout_ste->esid_data & ESID_MASK) != PAGE_OFFSET)
break;
castout_entry = (castout_entry + 1) & 0xf;
@@ -122,7 +122,7 @@ static int __ste_allocate(unsigned long ea, struct mm_struct *mm)
unsigned long offset;
/* Kernel or user address? */
- if (ea >= KERNELBASE) {
+ if (is_kernel_addr(ea)) {
vsid = get_kernel_vsid(ea);
} else {
if ((ea >= TASK_SIZE_USER64) || (! mm))
@@ -133,7 +133,7 @@ static int __ste_allocate(unsigned long ea, struct mm_struct *mm)
stab_entry = make_ste(get_paca()->stab_addr, GET_ESID(ea), vsid);
- if (ea < KERNELBASE) {
+ if (!is_kernel_addr(ea)) {
offset = __get_cpu_var(stab_cache_ptr);
if (offset < NR_STAB_CACHE_ENTRIES)
__get_cpu_var(stab_cache[offset++]) = stab_entry;
@@ -190,7 +190,7 @@ void switch_stab(struct task_struct *tsk, struct mm_struct *mm)
entry++, ste++) {
unsigned long ea;
ea = ste->esid_data & ESID_MASK;
- if (ea < KERNELBASE) {
+ if (!is_kernel_addr(ea)) {
ste->esid_data = 0;
}
}
@@ -251,7 +251,7 @@ void stabs_alloc(void)
panic("Unable to allocate segment table for CPU %d.\n",
cpu);
- newstab += KERNELBASE;
+ newstab = (unsigned long)__va(newstab);
memset((void *)newstab, 0, HW_PAGE_SIZE);
@@ -270,11 +270,11 @@ void stabs_alloc(void)
*/
void stab_initialize(unsigned long stab)
{
- unsigned long vsid = get_kernel_vsid(KERNELBASE);
+ unsigned long vsid = get_kernel_vsid(PAGE_OFFSET);
unsigned long stabreal;
asm volatile("isync; slbia; isync":::"memory");
- make_ste(stab, GET_ESID(KERNELBASE), vsid);
+ make_ste(stab, GET_ESID(PAGE_OFFSET), vsid);
/* Order update */
asm volatile("sync":::"memory");
diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c
index 859d29a0cac5..bb3afb6e6317 100644
--- a/arch/powerpc/mm/tlb_64.c
+++ b/arch/powerpc/mm/tlb_64.c
@@ -168,7 +168,7 @@ void hpte_update(struct mm_struct *mm, unsigned long addr,
batch->mm = mm;
batch->psize = psize;
}
- if (addr < KERNELBASE) {
+ if (!is_kernel_addr(addr)) {
vsid = get_vsid(mm->context.id, addr);
WARN_ON(vsid == 0);
} else
diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile
index 0782d0cca89c..554cd7c75321 100644
--- a/arch/powerpc/oprofile/Makefile
+++ b/arch/powerpc/oprofile/Makefile
@@ -9,3 +9,4 @@ DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \
oprofile-y := $(DRIVER_OBJS) common.o
oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o
oprofile-$(CONFIG_FSL_BOOKE) += op_model_fsl_booke.o
+oprofile-$(CONFIG_PPC32) += op_model_7450.o
diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c
index af2c05d20ba5..71615eb70b2b 100644
--- a/arch/powerpc/oprofile/common.c
+++ b/arch/powerpc/oprofile/common.c
@@ -14,9 +14,6 @@
*/
#include <linux/oprofile.h>
-#ifndef __powerpc64__
-#include <linux/slab.h>
-#endif /* ! __powerpc64__ */
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/errno.h>
@@ -31,10 +28,6 @@ static struct op_powerpc_model *model;
static struct op_counter_config ctr[OP_MAX_COUNTER];
static struct op_system_config sys;
-#ifndef __powerpc64__
-static char *cpu_type;
-#endif /* ! __powerpc64__ */
-
static void op_handle_interrupt(struct pt_regs *regs)
{
model->handle_interrupt(regs, ctr);
@@ -53,14 +46,7 @@ static int op_powerpc_setup(void)
model->reg_setup(ctr, &sys, model->num_counters);
/* Configure the registers on all cpus. */
-#ifdef __powerpc64__
on_each_cpu(model->cpu_setup, NULL, 0, 1);
-#else /* __powerpc64__ */
-#if 0
- /* FIXME: Make multi-cpu work */
- on_each_cpu(model->reg_setup, NULL, 0, 1);
-#endif
-#endif /* __powerpc64__ */
return 0;
}
@@ -95,7 +81,7 @@ static int op_powerpc_create_files(struct super_block *sb, struct dentry *root)
{
int i;
-#ifdef __powerpc64__
+#ifdef CONFIG_PPC64
/*
* There is one mmcr0, mmcr1 and mmcra for setting the events for
* all of the counters.
@@ -103,7 +89,7 @@ static int op_powerpc_create_files(struct super_block *sb, struct dentry *root)
oprofilefs_create_ulong(sb, root, "mmcr0", &sys.mmcr0);
oprofilefs_create_ulong(sb, root, "mmcr1", &sys.mmcr1);
oprofilefs_create_ulong(sb, root, "mmcra", &sys.mmcra);
-#endif /* __powerpc64__ */
+#endif
for (i = 0; i < model->num_counters; ++i) {
struct dentry *dir;
@@ -115,65 +101,68 @@ static int op_powerpc_create_files(struct super_block *sb, struct dentry *root)
oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
-#ifdef __powerpc64__
+
/*
- * We dont support per counter user/kernel selection, but
- * we leave the entries because userspace expects them
+ * Classic PowerPC doesn't support per-counter
+ * control like this, but the options are
+ * expected, so they remain. For Freescale
+ * Book-E style performance monitors, we do
+ * support them.
*/
-#endif /* __powerpc64__ */
oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
-#ifndef __powerpc64__
- /* FIXME: Not sure if this is used */
-#endif /* ! __powerpc64__ */
oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
}
oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel);
oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user);
-#ifdef __powerpc64__
+#ifdef CONFIG_PPC64
oprofilefs_create_ulong(sb, root, "backtrace_spinlocks",
&sys.backtrace_spinlocks);
-#endif /* __powerpc64__ */
+#endif
/* Default to tracing both kernel and user */
sys.enable_kernel = 1;
sys.enable_user = 1;
-#ifdef __powerpc64__
+#ifdef CONFIG_PPC64
/* Turn on backtracing through spinlocks by default */
sys.backtrace_spinlocks = 1;
-#endif /* __powerpc64__ */
+#endif
return 0;
}
int __init oprofile_arch_init(struct oprofile_operations *ops)
{
-#ifndef __powerpc64__
-#ifdef CONFIG_FSL_BOOKE
- model = &op_model_fsl_booke;
+ if (!cur_cpu_spec->oprofile_cpu_type)
+ return -ENODEV;
+
+ switch (cur_cpu_spec->oprofile_type) {
+#ifdef CONFIG_PPC64
+ case RS64:
+ model = &op_model_rs64;
+ break;
+ case POWER4:
+ model = &op_model_power4;
+ break;
#else
- return -ENODEV;
+ case G4:
+ model = &op_model_7450;
+ break;
#endif
+#ifdef CONFIG_FSL_BOOKE
+ case BOOKE:
+ model = &op_model_fsl_booke;
+ break;
+#endif
+ default:
+ return -ENODEV;
+ }
- cpu_type = kmalloc(32, GFP_KERNEL);
- if (NULL == cpu_type)
- return -ENOMEM;
-
- sprintf(cpu_type, "ppc/%s", cur_cpu_spec->cpu_name);
-
- model->num_counters = cur_cpu_spec->num_pmcs;
-
- ops->cpu_type = cpu_type;
-#else /* __powerpc64__ */
- if (!cur_cpu_spec->oprofile_model || !cur_cpu_spec->oprofile_cpu_type)
- return -ENODEV;
- model = cur_cpu_spec->oprofile_model;
model->num_counters = cur_cpu_spec->num_pmcs;
ops->cpu_type = cur_cpu_spec->oprofile_cpu_type;
-#endif /* __powerpc64__ */
ops->create_files = op_powerpc_create_files;
ops->setup = op_powerpc_setup;
ops->shutdown = op_powerpc_shutdown;
@@ -188,8 +177,4 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
void oprofile_arch_exit(void)
{
-#ifndef __powerpc64__
- kfree(cpu_type);
- cpu_type = NULL;
-#endif /* ! __powerpc64__ */
}
diff --git a/arch/powerpc/oprofile/op_model_7450.c b/arch/powerpc/oprofile/op_model_7450.c
new file mode 100644
index 000000000000..32abfdbb0eb1
--- /dev/null
+++ b/arch/powerpc/oprofile/op_model_7450.c
@@ -0,0 +1,206 @@
+/*
+ * oprofile/op_model_7450.c
+ *
+ * Freescale 745x/744x oprofile support, based on fsl_booke support
+ * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc
+ *
+ * Author: Andy Fleming
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/cputable.h>
+#include <asm/page.h>
+#include <asm/pmc.h>
+#include <asm/oprofile_impl.h>
+
+static unsigned long reset_value[OP_MAX_COUNTER];
+
+static int oprofile_running;
+static u32 mmcr0_val, mmcr1_val, mmcr2_val;
+
+#define MMCR0_PMC1_SHIFT 6
+#define MMCR0_PMC2_SHIFT 0
+#define MMCR1_PMC3_SHIFT 27
+#define MMCR1_PMC4_SHIFT 22
+#define MMCR1_PMC5_SHIFT 17
+#define MMCR1_PMC6_SHIFT 11
+
+#define mmcr0_event1(event) \
+ ((event << MMCR0_PMC1_SHIFT) & MMCR0_PMC1SEL)
+#define mmcr0_event2(event) \
+ ((event << MMCR0_PMC2_SHIFT) & MMCR0_PMC2SEL)
+
+#define mmcr1_event3(event) \
+ ((event << MMCR1_PMC3_SHIFT) & MMCR1_PMC3SEL)
+#define mmcr1_event4(event) \
+ ((event << MMCR1_PMC4_SHIFT) & MMCR1_PMC4SEL)
+#define mmcr1_event5(event) \
+ ((event << MMCR1_PMC5_SHIFT) & MMCR1_PMC5SEL)
+#define mmcr1_event6(event) \
+ ((event << MMCR1_PMC6_SHIFT) & MMCR1_PMC6SEL)
+
+#define MMCR0_INIT (MMCR0_FC | MMCR0_FCS | MMCR0_FCP | MMCR0_FCM1 | MMCR0_FCM0)
+
+/* Unfreezes the counters on this CPU, enables the interrupt,
+ * enables the counters to trigger the interrupt, and sets the
+ * counters to only count when the mark bit is not set.
+ */
+static void pmc_start_ctrs(void)
+{
+ u32 mmcr0 = mfspr(SPRN_MMCR0);
+
+ mmcr0 &= ~(MMCR0_FC | MMCR0_FCM0);
+ mmcr0 |= (MMCR0_FCECE | MMCR0_PMC1CE | MMCR0_PMCnCE | MMCR0_PMXE);
+
+ mtspr(SPRN_MMCR0, mmcr0);
+}
+
+/* Disables the counters on this CPU, and freezes them */
+static void pmc_stop_ctrs(void)
+{
+ u32 mmcr0 = mfspr(SPRN_MMCR0);
+
+ mmcr0 |= MMCR0_FC;
+ mmcr0 &= ~(MMCR0_FCECE | MMCR0_PMC1CE | MMCR0_PMCnCE | MMCR0_PMXE);
+
+ mtspr(SPRN_MMCR0, mmcr0);
+}
+
+/* Configures the counters on this CPU based on the global
+ * settings */
+static void fsl7450_cpu_setup(void *unused)
+{
+ /* freeze all counters */
+ pmc_stop_ctrs();
+
+ mtspr(SPRN_MMCR0, mmcr0_val);
+ mtspr(SPRN_MMCR1, mmcr1_val);
+ mtspr(SPRN_MMCR2, mmcr2_val);
+}
+
+#define NUM_CTRS 6
+
+/* Configures the global settings for the countes on all CPUs. */
+static void fsl7450_reg_setup(struct op_counter_config *ctr,
+ struct op_system_config *sys,
+ int num_ctrs)
+{
+ int i;
+
+ /* Our counters count up, and "count" refers to
+ * how much before the next interrupt, and we interrupt
+ * on overflow. So we calculate the starting value
+ * which will give us "count" until overflow.
+ * Then we set the events on the enabled counters */
+ for (i = 0; i < NUM_CTRS; ++i)
+ reset_value[i] = 0x80000000UL - ctr[i].count;
+
+ /* Set events for Counters 1 & 2 */
+ mmcr0_val = MMCR0_INIT | mmcr0_event1(ctr[0].event)
+ | mmcr0_event2(ctr[1].event);
+
+ /* Setup user/kernel bits */
+ if (sys->enable_kernel)
+ mmcr0_val &= ~(MMCR0_FCS);
+
+ if (sys->enable_user)
+ mmcr0_val &= ~(MMCR0_FCP);
+
+ /* Set events for Counters 3-6 */
+ mmcr1_val = mmcr1_event3(ctr[2].event)
+ | mmcr1_event4(ctr[3].event)
+ | mmcr1_event5(ctr[4].event)
+ | mmcr1_event6(ctr[5].event);
+
+ mmcr2_val = 0;
+}
+
+/* Sets the counters on this CPU to the chosen values, and starts them */
+static void fsl7450_start(struct op_counter_config *ctr)
+{
+ int i;
+
+ mtmsr(mfmsr() | MSR_PMM);
+
+ for (i = 0; i < NUM_CTRS; ++i) {
+ if (ctr[i].enabled)
+ ctr_write(i, reset_value[i]);
+ else
+ ctr_write(i, 0);
+ }
+
+ /* Clear the freeze bit, and enable the interrupt.
+ * The counters won't actually start until the rfi clears
+ * the PMM bit */
+ pmc_start_ctrs();
+
+ oprofile_running = 1;
+}
+
+/* Stop the counters on this CPU */
+static void fsl7450_stop(void)
+{
+ /* freeze counters */
+ pmc_stop_ctrs();
+
+ oprofile_running = 0;
+
+ mb();
+}
+
+
+/* Handle the interrupt on this CPU, and log a sample for each
+ * event that triggered the interrupt */
+static void fsl7450_handle_interrupt(struct pt_regs *regs,
+ struct op_counter_config *ctr)
+{
+ unsigned long pc;
+ int is_kernel;
+ int val;
+ int i;
+
+ /* set the PMM bit (see comment below) */
+ mtmsr(mfmsr() | MSR_PMM);
+
+ pc = mfspr(SPRN_SIAR);
+ is_kernel = (pc >= KERNELBASE);
+
+ for (i = 0; i < NUM_CTRS; ++i) {
+ val = ctr_read(i);
+ if (val < 0) {
+ if (oprofile_running && ctr[i].enabled) {
+ oprofile_add_pc(pc, is_kernel, i);
+ ctr_write(i, reset_value[i]);
+ } else {
+ ctr_write(i, 0);
+ }
+ }
+ }
+
+ /* The freeze bit was set by the interrupt. */
+ /* Clear the freeze bit, and reenable the interrupt.
+ * The counters won't actually start until the rfi clears
+ * the PMM bit */
+ pmc_start_ctrs();
+}
+
+struct op_powerpc_model op_model_7450= {
+ .reg_setup = fsl7450_reg_setup,
+ .cpu_setup = fsl7450_cpu_setup,
+ .start = fsl7450_start,
+ .stop = fsl7450_stop,
+ .handle_interrupt = fsl7450_handle_interrupt,
+};
diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c
index a3401b46f3ba..659a021da0c7 100644
--- a/arch/powerpc/oprofile/op_model_power4.c
+++ b/arch/powerpc/oprofile/op_model_power4.c
@@ -252,7 +252,7 @@ static unsigned long get_pc(struct pt_regs *regs)
return (unsigned long)__va(pc);
/* Not sure where we were */
- if (pc < KERNELBASE)
+ if (!is_kernel_addr(pc))
/* function descriptor madness */
return *((unsigned long *)kernel_unknown_bucket);
@@ -264,7 +264,7 @@ static int get_kernel(unsigned long pc)
int is_kernel;
if (!mmcra_has_sihv) {
- is_kernel = (pc >= KERNELBASE);
+ is_kernel = is_kernel_addr(pc);
} else {
unsigned long mmcra = mfspr(SPRN_MMCRA);
is_kernel = ((mmcra & MMCRA_SIPR) == 0);
diff --git a/arch/powerpc/oprofile/op_model_rs64.c b/arch/powerpc/oprofile/op_model_rs64.c
index e010b85996e8..5c909ee609fe 100644
--- a/arch/powerpc/oprofile/op_model_rs64.c
+++ b/arch/powerpc/oprofile/op_model_rs64.c
@@ -178,7 +178,6 @@ static void rs64_handle_interrupt(struct pt_regs *regs,
int val;
int i;
unsigned long pc = mfspr(SPRN_SIAR);
- int is_kernel = (pc >= KERNELBASE);
/* set the PMM bit (see comment below) */
mtmsrd(mfmsr() | MSR_PMM);
@@ -187,7 +186,7 @@ static void rs64_handle_interrupt(struct pt_regs *regs,
val = ctr_read(i);
if (val < 0) {
if (ctr[i].enabled) {
- oprofile_add_pc(pc, is_kernel, i);
+ oprofile_add_pc(pc, is_kernel_addr(pc), i);
ctr_write(i, reset_value[i]);
} else {
ctr_write(i, 0);
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
new file mode 100644
index 000000000000..3157071e241c
--- /dev/null
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -0,0 +1,13 @@
+menu "Cell Broadband Engine options"
+ depends on PPC_CELL
+
+config SPU_FS
+ tristate "SPU file system"
+ default m
+ depends on PPC_CELL
+ help
+ The SPU file system is used to access Synergistic Processing
+ Units on machines implementing the Broadband Processor
+ Architecture.
+
+endmenu
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index 55e094b96bc0..16031b565be4 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -1,2 +1,10 @@
obj-y += interrupt.o iommu.o setup.o spider-pic.o
+obj-y += pervasive.o
+
obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_SPU_FS) += spufs/ spu-base.o
+
+spu-base-y += spu_base.o spu_priv1.o
+
+builtin-spufs-$(CONFIG_SPU_FS) += spu_syscalls.o
+obj-y += $(builtin-spufs-m)
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 7fbe78a9327d..63aa52acf441 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -23,6 +23,7 @@
#include <linux/config.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/module.h>
#include <linux/percpu.h>
#include <linux/types.h>
@@ -55,6 +56,7 @@ struct iic_regs {
struct iic {
struct iic_regs __iomem *regs;
+ u8 target_id;
};
static DEFINE_PER_CPU(struct iic, iic);
@@ -172,12 +174,11 @@ int iic_get_irq(struct pt_regs *regs)
return irq;
}
-static struct iic_regs __iomem *find_iic(int cpu)
+static int setup_iic(int cpu, struct iic *iic)
{
struct device_node *np;
int nodeid = cpu / 2;
unsigned long regs;
- struct iic_regs __iomem *iic_regs;
for (np = of_find_node_by_type(NULL, "cpu");
np;
@@ -188,20 +189,23 @@ static struct iic_regs __iomem *find_iic(int cpu)
if (!np) {
printk(KERN_WARNING "IIC: CPU %d not found\n", cpu);
- iic_regs = NULL;
- } else {
- regs = *(long *)get_property(np, "iic", NULL);
-
- /* hack until we have decided on the devtree info */
- regs += 0x400;
- if (cpu & 1)
- regs += 0x20;
-
- printk(KERN_DEBUG "IIC for CPU %d at %lx\n", cpu, regs);
- iic_regs = __ioremap(regs, sizeof(struct iic_regs),
- _PAGE_NO_CACHE);
+ iic->regs = NULL;
+ iic->target_id = 0xff;
+ return -ENODEV;
}
- return iic_regs;
+
+ regs = *(long *)get_property(np, "iic", NULL);
+
+ /* hack until we have decided on the devtree info */
+ regs += 0x400;
+ if (cpu & 1)
+ regs += 0x20;
+
+ printk(KERN_DEBUG "IIC for CPU %d at %lx\n", cpu, regs);
+ iic->regs = __ioremap(regs, sizeof(struct iic_regs),
+ _PAGE_NO_CACHE);
+ iic->target_id = (nodeid << 4) + ((cpu & 1) ? 0xf : 0xe);
+ return 0;
}
#ifdef CONFIG_SMP
@@ -227,6 +231,12 @@ void iic_cause_IPI(int cpu, int mesg)
out_be64(&per_cpu(iic, cpu).regs->generate, (IIC_NUM_IPIS - 1 - mesg) << 4);
}
+u8 iic_get_target_id(int cpu)
+{
+ return per_cpu(iic, cpu).target_id;
+}
+EXPORT_SYMBOL_GPL(iic_get_target_id);
+
static irqreturn_t iic_ipi_action(int irq, void *dev_id, struct pt_regs *regs)
{
smp_message_recv(iic_irq_to_ipi(irq), regs);
@@ -276,7 +286,7 @@ void iic_init_IRQ(void)
irq_offset = 0;
for_each_cpu(cpu) {
iic = &per_cpu(iic, cpu);
- iic->regs = find_iic(cpu);
+ setup_iic(cpu, iic);
if (iic->regs)
out_be64(&iic->regs->prio, 0xff);
}
diff --git a/arch/powerpc/platforms/cell/interrupt.h b/arch/powerpc/platforms/cell/interrupt.h
index 37d58e6fd0c6..a14bd38791c0 100644
--- a/arch/powerpc/platforms/cell/interrupt.h
+++ b/arch/powerpc/platforms/cell/interrupt.h
@@ -54,6 +54,7 @@ extern void iic_setup_cpu(void);
extern void iic_local_enable(void);
extern void iic_local_disable(void);
+extern u8 iic_get_target_id(int cpu);
extern void spider_init_IRQ(void);
extern int spider_get_irq(unsigned long int_pending);
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 74f999b4ac9e..46e7cb9c3e64 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -29,6 +29,8 @@
#include <linux/bootmem.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
#include <asm/sections.h>
#include <asm/iommu.h>
@@ -40,6 +42,7 @@
#include <asm/abs_addr.h>
#include <asm/system.h>
#include <asm/ppc-pci.h>
+#include <asm/udbg.h>
#include "iommu.h"
@@ -220,8 +223,6 @@ set_iopt_cache(void __iomem *base, unsigned long index,
{
unsigned long __iomem *tags = base + IOC_PT_CACHE_DIR;
unsigned long __iomem *p = base + IOC_PT_CACHE_REG;
- pr_debug("iopt %02lx was v%016lx/t%016lx, store v%016lx/t%016lx\n",
- index, get_iopt_cache(base, index, &oldtag), oldtag, val, tag);
out_be64(p, val);
out_be64(&tags[index], tag);
@@ -248,67 +249,176 @@ set_iocmd_config(void __iomem *base)
out_be64(p, conf | IOCMD_CONF_TE);
}
-/* FIXME: get these from the device tree */
-#define ioc_base 0x20000511000ull
-#define ioc_mmio_base 0x20000510000ull
-#define ioid 0x48a
-#define iopt_phys_offset (- 0x20000000) /* We have a 512MB offset from the SB */
-#define io_page_size 0x1000000
-
-static unsigned long map_iopt_entry(unsigned long address)
+static void enable_mapping(void __iomem *base, void __iomem *mmio_base)
{
- switch (address >> 20) {
- case 0x600:
- address = 0x24020000000ull; /* spider i/o */
- break;
- default:
- address += iopt_phys_offset;
- break;
- }
-
- return get_iopt_entry(address, ioid, IOPT_PROT_RW);
+ set_iocmd_config(base);
+ set_iost_origin(mmio_base);
}
-static void iommu_bus_setup_null(struct pci_bus *b) { }
static void iommu_dev_setup_null(struct pci_dev *d) { }
+static void iommu_bus_setup_null(struct pci_bus *b) { }
+
+struct cell_iommu {
+ unsigned long base;
+ unsigned long mmio_base;
+ void __iomem *mapped_base;
+ void __iomem *mapped_mmio_base;
+};
+
+static struct cell_iommu cell_iommus[NR_CPUS];
/* initialize the iommu to support a simple linear mapping
* for each DMA window used by any device. For now, we
* happen to know that there is only one DMA window in use,
* starting at iopt_phys_offset. */
-static void cell_map_iommu(void)
+static void cell_do_map_iommu(struct cell_iommu *iommu,
+ unsigned int ioid,
+ unsigned long map_start,
+ unsigned long map_size)
{
- unsigned long address;
- void __iomem *base;
+ unsigned long io_address, real_address;
+ void __iomem *ioc_base, *ioc_mmio_base;
ioste ioste;
unsigned long index;
- base = __ioremap(ioc_base, 0x1000, _PAGE_NO_CACHE);
- pr_debug("%lx mapped to %p\n", ioc_base, base);
- set_iocmd_config(base);
- iounmap(base);
+ /* we pretend the io page table was at a very high address */
+ const unsigned long fake_iopt = 0x10000000000ul;
+ const unsigned long io_page_size = 0x1000000; /* use 16M pages */
+ const unsigned long io_segment_size = 0x10000000; /* 256M */
+
+ ioc_base = iommu->mapped_base;
+ ioc_mmio_base = iommu->mapped_mmio_base;
+
+ for (real_address = 0, io_address = 0;
+ io_address <= map_start + map_size;
+ real_address += io_page_size, io_address += io_page_size) {
+ ioste = get_iost_entry(fake_iopt, io_address, io_page_size);
+ if ((real_address % io_segment_size) == 0) /* segment start */
+ set_iost_cache(ioc_mmio_base,
+ io_address >> 28, ioste);
+ index = get_ioc_hash_1way(ioste, io_address);
+ pr_debug("addr %08lx, index %02lx, ioste %016lx\n",
+ io_address, index, ioste.val);
+ set_iopt_cache(ioc_mmio_base,
+ get_ioc_hash_1way(ioste, io_address),
+ get_ioc_tag(ioste, io_address),
+ get_iopt_entry(real_address-map_start, ioid, IOPT_PROT_RW));
+ }
+}
- base = __ioremap(ioc_mmio_base, 0x1000, _PAGE_NO_CACHE);
- pr_debug("%lx mapped to %p\n", ioc_mmio_base, base);
+static void iommu_devnode_setup(struct device_node *d)
+{
+ unsigned int *ioid;
+ unsigned long *dma_window, map_start, map_size, token;
+ struct cell_iommu *iommu;
- set_iost_origin(base);
+ ioid = (unsigned int *)get_property(d, "ioid", NULL);
+ if (!ioid)
+ pr_debug("No ioid entry found !\n");
- for (address = 0; address < 0x100000000ul; address += io_page_size) {
- ioste = get_iost_entry(0x10000000000ul, address, io_page_size);
- if ((address & 0xfffffff) == 0) /* segment start */
- set_iost_cache(base, address >> 28, ioste);
- index = get_ioc_hash_1way(ioste, address);
- pr_debug("addr %08lx, index %02lx, ioste %016lx\n",
- address, index, ioste.val);
- set_iopt_cache(base,
- get_ioc_hash_1way(ioste, address),
- get_ioc_tag(ioste, address),
- map_iopt_entry(address));
- }
- iounmap(base);
+ dma_window = (unsigned long *)get_property(d, "ibm,dma-window", NULL);
+ if (!dma_window)
+ pr_debug("No ibm,dma-window entry found !\n");
+
+ map_start = dma_window[1];
+ map_size = dma_window[2];
+ token = dma_window[0] >> 32;
+
+ iommu = &cell_iommus[token];
+
+ cell_do_map_iommu(iommu, *ioid, map_start, map_size);
+}
+
+static void iommu_bus_setup(struct pci_bus *b)
+{
+ struct device_node *d = (struct device_node *)b->sysdata;
+ iommu_devnode_setup(d);
+}
+
+
+static int cell_map_iommu_hardcoded(int num_nodes)
+{
+ struct cell_iommu *iommu = NULL;
+
+ pr_debug("%s(%d): Using hardcoded defaults\n", __FUNCTION__, __LINE__);
+
+ /* node 0 */
+ iommu = &cell_iommus[0];
+ iommu->mapped_base = __ioremap(0x20000511000, 0x1000, _PAGE_NO_CACHE);
+ iommu->mapped_mmio_base = __ioremap(0x20000510000, 0x1000, _PAGE_NO_CACHE);
+
+ enable_mapping(iommu->mapped_base, iommu->mapped_mmio_base);
+
+ cell_do_map_iommu(iommu, 0x048a,
+ 0x20000000ul,0x20000000ul);
+
+ if (num_nodes < 2)
+ return 0;
+
+ /* node 1 */
+ iommu = &cell_iommus[1];
+ iommu->mapped_base = __ioremap(0x30000511000, 0x1000, _PAGE_NO_CACHE);
+ iommu->mapped_mmio_base = __ioremap(0x30000510000, 0x1000, _PAGE_NO_CACHE);
+
+ enable_mapping(iommu->mapped_base, iommu->mapped_mmio_base);
+
+ cell_do_map_iommu(iommu, 0x048a,
+ 0x20000000,0x20000000ul);
+
+ return 0;
}
+static int cell_map_iommu(void)
+{
+ unsigned int num_nodes = 0, *node_id;
+ unsigned long *base, *mmio_base;
+ struct device_node *dn;
+ struct cell_iommu *iommu = NULL;
+
+ /* determine number of nodes (=iommus) */
+ pr_debug("%s(%d): determining number of nodes...", __FUNCTION__, __LINE__);
+ for(dn = of_find_node_by_type(NULL, "cpu");
+ dn;
+ dn = of_find_node_by_type(dn, "cpu")) {
+ node_id = (unsigned int *)get_property(dn, "node-id", NULL);
+
+ if (num_nodes < *node_id)
+ num_nodes = *node_id;
+ }
+
+ num_nodes++;
+ pr_debug("%i found.\n", num_nodes);
+
+ /* map the iommu registers for each node */
+ pr_debug("%s(%d): Looping through nodes\n", __FUNCTION__, __LINE__);
+ for(dn = of_find_node_by_type(NULL, "cpu");
+ dn;
+ dn = of_find_node_by_type(dn, "cpu")) {
+
+ node_id = (unsigned int *)get_property(dn, "node-id", NULL);
+ base = (unsigned long *)get_property(dn, "ioc-cache", NULL);
+ mmio_base = (unsigned long *)get_property(dn, "ioc-translation", NULL);
+
+ if (!base || !mmio_base || !node_id)
+ return cell_map_iommu_hardcoded(num_nodes);
+
+ iommu = &cell_iommus[*node_id];
+ iommu->base = *base;
+ iommu->mmio_base = *mmio_base;
+
+ iommu->mapped_base = __ioremap(*base, 0x1000, _PAGE_NO_CACHE);
+ iommu->mapped_mmio_base = __ioremap(*mmio_base, 0x1000, _PAGE_NO_CACHE);
+
+ enable_mapping(iommu->mapped_base,
+ iommu->mapped_mmio_base);
+
+ /* everything else will be done in iommu_bus_setup */
+ }
+
+ return 1;
+}
+
static void *cell_alloc_coherent(struct device *hwdev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
{
@@ -365,11 +475,28 @@ static int cell_dma_supported(struct device *dev, u64 mask)
void cell_init_iommu(void)
{
- cell_map_iommu();
-
- /* Direct I/O, IOMMU off */
- ppc_md.iommu_dev_setup = iommu_dev_setup_null;
- ppc_md.iommu_bus_setup = iommu_bus_setup_null;
+ int setup_bus = 0;
+
+ if (of_find_node_by_path("/mambo")) {
+ pr_info("Not using iommu on systemsim\n");
+ } else {
+
+ if (!(of_chosen &&
+ get_property(of_chosen, "linux,iommu-off", NULL)))
+ setup_bus = cell_map_iommu();
+
+ if (setup_bus) {
+ pr_debug("%s: IOMMU mapping activated\n", __FUNCTION__);
+ ppc_md.iommu_dev_setup = iommu_dev_setup_null;
+ ppc_md.iommu_bus_setup = iommu_bus_setup;
+ } else {
+ pr_debug("%s: IOMMU mapping activated, "
+ "no device action necessary\n", __FUNCTION__);
+ /* Direct I/O, IOMMU off */
+ ppc_md.iommu_dev_setup = iommu_dev_setup_null;
+ ppc_md.iommu_bus_setup = iommu_bus_setup_null;
+ }
+ }
pci_dma_ops.alloc_coherent = cell_alloc_coherent;
pci_dma_ops.free_coherent = cell_free_coherent;
diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c
new file mode 100644
index 000000000000..85152544c153
--- /dev/null
+++ b/arch/powerpc/platforms/cell/pervasive.c
@@ -0,0 +1,229 @@
+/*
+ * CBE Pervasive Monitor and Debug
+ *
+ * (C) Copyright IBM Corporation 2005
+ *
+ * Authors: Maximino Aguilar (maguilar@us.ibm.com)
+ * Michael N. Day (mnday@us.ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#undef DEBUG
+
+#include <linux/config.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/percpu.h>
+#include <linux/types.h>
+#include <linux/kallsyms.h>
+
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/pgtable.h>
+#include <asm/reg.h>
+
+#include "pervasive.h"
+
+static DEFINE_SPINLOCK(cbe_pervasive_lock);
+struct cbe_pervasive {
+ struct pmd_regs __iomem *regs;
+ unsigned int thread;
+};
+
+/* can't use per_cpu from setup_arch */
+static struct cbe_pervasive cbe_pervasive[NR_CPUS];
+
+static void __init cbe_enable_pause_zero(void)
+{
+ unsigned long thread_switch_control;
+ unsigned long temp_register;
+ struct cbe_pervasive *p;
+ int thread;
+
+ spin_lock_irq(&cbe_pervasive_lock);
+ p = &cbe_pervasive[smp_processor_id()];
+
+ if (!cbe_pervasive->regs)
+ goto out;
+
+ pr_debug("Power Management: CPU %d\n", smp_processor_id());
+
+ /* Enable Pause(0) control bit */
+ temp_register = in_be64(&p->regs->pm_control);
+
+ out_be64(&p->regs->pm_control,
+ temp_register|PMD_PAUSE_ZERO_CONTROL);
+
+ /* Enable DEC and EE interrupt request */
+ thread_switch_control = mfspr(SPRN_TSC_CELL);
+ thread_switch_control |= TSC_CELL_EE_ENABLE | TSC_CELL_EE_BOOST;
+
+ switch ((mfspr(SPRN_CTRLF) & CTRL_CT)) {
+ case CTRL_CT0:
+ thread_switch_control |= TSC_CELL_DEC_ENABLE_0;
+ thread = 0;
+ break;
+ case CTRL_CT1:
+ thread_switch_control |= TSC_CELL_DEC_ENABLE_1;
+ thread = 1;
+ break;
+ default:
+ printk(KERN_WARNING "%s: unknown configuration\n",
+ __FUNCTION__);
+ thread = -1;
+ break;
+ }
+
+ if (p->thread != thread)
+ printk(KERN_WARNING "%s: device tree inconsistant, "
+ "cpu %i: %d/%d\n", __FUNCTION__,
+ smp_processor_id(),
+ p->thread, thread);
+
+ mtspr(SPRN_TSC_CELL, thread_switch_control);
+
+out:
+ spin_unlock_irq(&cbe_pervasive_lock);
+}
+
+static void cbe_idle(void)
+{
+ unsigned long ctrl;
+
+ cbe_enable_pause_zero();
+
+ while (1) {
+ if (!need_resched()) {
+ local_irq_disable();
+ while (!need_resched()) {
+ /* go into low thread priority */
+ HMT_low();
+
+ /*
+ * atomically disable thread execution
+ * and runlatch.
+ * External and Decrementer exceptions
+ * are still handled when the thread
+ * is disabled but now enter in
+ * cbe_system_reset_exception()
+ */
+ ctrl = mfspr(SPRN_CTRLF);
+ ctrl &= ~(CTRL_RUNLATCH | CTRL_TE);
+ mtspr(SPRN_CTRLT, ctrl);
+ }
+ /* restore thread prio */
+ HMT_medium();
+ local_irq_enable();
+ }
+
+ /*
+ * turn runlatch on again before scheduling the
+ * process we just woke up
+ */
+ ppc64_runlatch_on();
+
+ preempt_enable_no_resched();
+ schedule();
+ preempt_disable();
+ }
+}
+
+int cbe_system_reset_exception(struct pt_regs *regs)
+{
+ switch (regs->msr & SRR1_WAKEMASK) {
+ case SRR1_WAKEEE:
+ do_IRQ(regs);
+ break;
+ case SRR1_WAKEDEC:
+ timer_interrupt(regs);
+ break;
+ case SRR1_WAKEMT:
+ /* no action required */
+ break;
+ default:
+ /* do system reset */
+ return 0;
+ }
+ /* everything handled */
+ return 1;
+}
+
+static int __init cbe_find_pmd_mmio(int cpu, struct cbe_pervasive *p)
+{
+ struct device_node *node;
+ unsigned int *int_servers;
+ char *addr;
+ unsigned long real_address;
+ unsigned int size;
+
+ struct pmd_regs __iomem *pmd_mmio_area;
+ int hardid, thread;
+ int proplen;
+
+ pmd_mmio_area = NULL;
+ hardid = get_hard_smp_processor_id(cpu);
+ for (node = NULL; (node = of_find_node_by_type(node, "cpu"));) {
+ int_servers = (void *) get_property(node,
+ "ibm,ppc-interrupt-server#s", &proplen);
+ if (!int_servers) {
+ printk(KERN_WARNING "%s misses "
+ "ibm,ppc-interrupt-server#s property",
+ node->full_name);
+ continue;
+ }
+ for (thread = 0; thread < proplen / sizeof (int); thread++) {
+ if (hardid == int_servers[thread]) {
+ addr = get_property(node, "pervasive", NULL);
+ goto found;
+ }
+ }
+ }
+
+ printk(KERN_WARNING "%s: CPU %d not found\n", __FUNCTION__, cpu);
+ return -EINVAL;
+
+found:
+ real_address = *(unsigned long*) addr;
+ addr += sizeof (unsigned long);
+ size = *(unsigned int*) addr;
+
+ pr_debug("pervasive area for CPU %d at %lx, size %x\n",
+ cpu, real_address, size);
+ p->regs = __ioremap(real_address, size, _PAGE_NO_CACHE);
+ p->thread = thread;
+ return 0;
+}
+
+void __init cell_pervasive_init(void)
+{
+ struct cbe_pervasive *p;
+ int cpu;
+ int ret;
+
+ if (!cpu_has_feature(CPU_FTR_PAUSE_ZERO))
+ return;
+
+ for_each_cpu(cpu) {
+ p = &cbe_pervasive[cpu];
+ ret = cbe_find_pmd_mmio(cpu, p);
+ if (ret)
+ return;
+ }
+
+ ppc_md.idle_loop = cbe_idle;
+ ppc_md.system_reset_exception = cbe_system_reset_exception;
+}
diff --git a/arch/powerpc/platforms/cell/pervasive.h b/arch/powerpc/platforms/cell/pervasive.h
new file mode 100644
index 000000000000..da1fb85ca3e8
--- /dev/null
+++ b/arch/powerpc/platforms/cell/pervasive.h
@@ -0,0 +1,62 @@
+/*
+ * Cell Pervasive Monitor and Debug interface and HW structures
+ *
+ * (C) Copyright IBM Corporation 2005
+ *
+ * Authors: Maximino Aguilar (maguilar@us.ibm.com)
+ * David J. Erb (djerb@us.ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifndef PERVASIVE_H
+#define PERVASIVE_H
+
+struct pmd_regs {
+ u8 pad_0x0000_0x0800[0x0800 - 0x0000]; /* 0x0000 */
+
+ /* Thermal Sensor Registers */
+ u64 ts_ctsr1; /* 0x0800 */
+ u64 ts_ctsr2; /* 0x0808 */
+ u64 ts_mtsr1; /* 0x0810 */
+ u64 ts_mtsr2; /* 0x0818 */
+ u64 ts_itr1; /* 0x0820 */
+ u64 ts_itr2; /* 0x0828 */
+ u64 ts_gitr; /* 0x0830 */
+ u64 ts_isr; /* 0x0838 */
+ u64 ts_imr; /* 0x0840 */
+ u64 tm_cr1; /* 0x0848 */
+ u64 tm_cr2; /* 0x0850 */
+ u64 tm_simr; /* 0x0858 */
+ u64 tm_tpr; /* 0x0860 */
+ u64 tm_str1; /* 0x0868 */
+ u64 tm_str2; /* 0x0870 */
+ u64 tm_tsr; /* 0x0878 */
+
+ /* Power Management */
+ u64 pm_control; /* 0x0880 */
+#define PMD_PAUSE_ZERO_CONTROL 0x10000
+ u64 pm_status; /* 0x0888 */
+
+ /* Time Base Register */
+ u64 tbr; /* 0x0890 */
+
+ u8 pad_0x0898_0x1000 [0x1000 - 0x0898]; /* 0x0898 */
+};
+
+void __init cell_pervasive_init(void);
+
+#endif
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index 9a495634d0c2..18e25e65c04b 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -33,6 +33,7 @@
#include <asm/mmu.h>
#include <asm/processor.h>
#include <asm/io.h>
+#include <asm/kexec.h>
#include <asm/pgtable.h>
#include <asm/prom.h>
#include <asm/rtas.h>
@@ -48,6 +49,7 @@
#include "interrupt.h"
#include "iommu.h"
+#include "pervasive.h"
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
@@ -67,6 +69,77 @@ void cell_show_cpuinfo(struct seq_file *m)
of_node_put(root);
}
+#ifdef CONFIG_SPARSEMEM
+static int __init find_spu_node_id(struct device_node *spe)
+{
+ unsigned int *id;
+#ifdef CONFIG_NUMA
+ struct device_node *cpu;
+ cpu = spe->parent->parent;
+ id = (unsigned int *)get_property(cpu, "node-id", NULL);
+#else
+ id = NULL;
+#endif
+ return id ? *id : 0;
+}
+
+static void __init cell_spuprop_present(struct device_node *spe,
+ const char *prop, int early)
+{
+ struct address_prop {
+ unsigned long address;
+ unsigned int len;
+ } __attribute__((packed)) *p;
+ int proplen;
+
+ unsigned long start_pfn, end_pfn, pfn;
+ int node_id;
+
+ p = (void*)get_property(spe, prop, &proplen);
+ WARN_ON(proplen != sizeof (*p));
+
+ node_id = find_spu_node_id(spe);
+
+ start_pfn = p->address >> PAGE_SHIFT;
+ end_pfn = (p->address + p->len + PAGE_SIZE - 1) >> PAGE_SHIFT;
+
+ /* We need to call memory_present *before* the call to sparse_init,
+ but we can initialize the page structs only *after* that call.
+ Thus, we're being called twice. */
+ if (early)
+ memory_present(node_id, start_pfn, end_pfn);
+ else {
+ /* As the pages backing SPU LS and I/O are outside the range
+ of regular memory, their page structs were not initialized
+ by free_area_init. Do it here instead. */
+ for (pfn = start_pfn; pfn < end_pfn; pfn++) {
+ struct page *page = pfn_to_page(pfn);
+ set_page_links(page, ZONE_DMA, node_id, pfn);
+ set_page_count(page, 1);
+ reset_page_mapcount(page);
+ SetPageReserved(page);
+ INIT_LIST_HEAD(&page->lru);
+ }
+ }
+}
+
+static void __init cell_spumem_init(int early)
+{
+ struct device_node *node;
+ for (node = of_find_node_by_type(NULL, "spe");
+ node; node = of_find_node_by_type(node, "spe")) {
+ cell_spuprop_present(node, "local-store", early);
+ cell_spuprop_present(node, "problem", early);
+ cell_spuprop_present(node, "priv1", early);
+ cell_spuprop_present(node, "priv2", early);
+ }
+}
+#else
+static void __init cell_spumem_init(int early)
+{
+}
+#endif
+
static void cell_progress(char *s, unsigned short hex)
{
printk("*** %04x : %s\n", hex, s ? s : "");
@@ -93,11 +166,14 @@ static void __init cell_setup_arch(void)
init_pci_config_tokens();
find_and_init_phbs();
spider_init_IRQ();
+ cell_pervasive_init();
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
mmio_nvram_init();
+
+ cell_spumem_init(0);
}
/*
@@ -113,6 +189,8 @@ static void __init cell_init_early(void)
ppc64_interrupt_controller = IC_CELL_PIC;
+ cell_spumem_init(1);
+
DBG(" <- cell_init_early()\n");
}
@@ -125,6 +203,15 @@ static int __init cell_probe(int platform)
return 1;
}
+/*
+ * Cell has no legacy IO; anything calling this function has to
+ * fail or bad things will happen
+ */
+static int cell_check_legacy_ioport(unsigned int baseport)
+{
+ return -ENODEV;
+}
+
struct machdep_calls __initdata cell_md = {
.probe = cell_probe,
.setup_arch = cell_setup_arch,
@@ -137,5 +224,11 @@ struct machdep_calls __initdata cell_md = {
.get_rtc_time = rtas_get_rtc_time,
.set_rtc_time = rtas_set_rtc_time,
.calibrate_decr = generic_calibrate_decr,
+ .check_legacy_ioport = cell_check_legacy_ioport,
.progress = cell_progress,
+#ifdef CONFIG_KEXEC
+ .machine_kexec = default_machine_kexec,
+ .machine_kexec_prepare = default_machine_kexec_prepare,
+ .machine_crash_shutdown = default_machine_crash_shutdown,
+#endif
};
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
new file mode 100644
index 000000000000..d75ae03df686
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -0,0 +1,711 @@
+/*
+ * Low-level SPU handling
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * Author: Arnd Bergmann <arndb@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#undef DEBUG
+
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/poll.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/semaphore.h>
+#include <asm/spu.h>
+#include <asm/mmu_context.h>
+
+#include "interrupt.h"
+
+static int __spu_trap_invalid_dma(struct spu *spu)
+{
+ pr_debug("%s\n", __FUNCTION__);
+ force_sig(SIGBUS, /* info, */ current);
+ return 0;
+}
+
+static int __spu_trap_dma_align(struct spu *spu)
+{
+ pr_debug("%s\n", __FUNCTION__);
+ force_sig(SIGBUS, /* info, */ current);
+ return 0;
+}
+
+static int __spu_trap_error(struct spu *spu)
+{
+ pr_debug("%s\n", __FUNCTION__);
+ force_sig(SIGILL, /* info, */ current);
+ return 0;
+}
+
+static void spu_restart_dma(struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ if (!test_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags))
+ out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESTART_DMA_COMMAND);
+}
+
+static int __spu_trap_data_seg(struct spu *spu, unsigned long ea)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+ struct mm_struct *mm = spu->mm;
+ u64 esid, vsid;
+
+ pr_debug("%s\n", __FUNCTION__);
+
+ if (test_bit(SPU_CONTEXT_SWITCH_ACTIVE, &spu->flags)) {
+ /* SLBs are pre-loaded for context switch, so
+ * we should never get here!
+ */
+ printk("%s: invalid access during switch!\n", __func__);
+ return 1;
+ }
+ if (!mm || (REGION_ID(ea) != USER_REGION_ID)) {
+ /* Future: support kernel segments so that drivers
+ * can use SPUs.
+ */
+ pr_debug("invalid region access at %016lx\n", ea);
+ return 1;
+ }
+
+ esid = (ea & ESID_MASK) | SLB_ESID_V;
+ vsid = (get_vsid(mm->context.id, ea) << SLB_VSID_SHIFT) | SLB_VSID_USER;
+ if (in_hugepage_area(mm->context, ea))
+ vsid |= SLB_VSID_L;
+
+ out_be64(&priv2->slb_index_W, spu->slb_replace);
+ out_be64(&priv2->slb_vsid_RW, vsid);
+ out_be64(&priv2->slb_esid_RW, esid);
+
+ spu->slb_replace++;
+ if (spu->slb_replace >= 8)
+ spu->slb_replace = 0;
+
+ spu_restart_dma(spu);
+
+ return 0;
+}
+
+extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); //XXX
+static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr)
+{
+ pr_debug("%s\n", __FUNCTION__);
+
+ /* Handle kernel space hash faults immediately.
+ User hash faults need to be deferred to process context. */
+ if ((dsisr & MFC_DSISR_PTE_NOT_FOUND)
+ && REGION_ID(ea) != USER_REGION_ID
+ && hash_page(ea, _PAGE_PRESENT, 0x300) == 0) {
+ spu_restart_dma(spu);
+ return 0;
+ }
+
+ if (test_bit(SPU_CONTEXT_SWITCH_ACTIVE, &spu->flags)) {
+ printk("%s: invalid access during switch!\n", __func__);
+ return 1;
+ }
+
+ spu->dar = ea;
+ spu->dsisr = dsisr;
+ mb();
+ if (spu->stop_callback)
+ spu->stop_callback(spu);
+ return 0;
+}
+
+static int __spu_trap_mailbox(struct spu *spu)
+{
+ if (spu->ibox_callback)
+ spu->ibox_callback(spu);
+
+ /* atomically disable SPU mailbox interrupts */
+ spin_lock(&spu->register_lock);
+ spu_int_mask_and(spu, 2, ~0x1);
+ spin_unlock(&spu->register_lock);
+ return 0;
+}
+
+static int __spu_trap_stop(struct spu *spu)
+{
+ pr_debug("%s\n", __FUNCTION__);
+ spu->stop_code = in_be32(&spu->problem->spu_status_R);
+ if (spu->stop_callback)
+ spu->stop_callback(spu);
+ return 0;
+}
+
+static int __spu_trap_halt(struct spu *spu)
+{
+ pr_debug("%s\n", __FUNCTION__);
+ spu->stop_code = in_be32(&spu->problem->spu_status_R);
+ if (spu->stop_callback)
+ spu->stop_callback(spu);
+ return 0;
+}
+
+static int __spu_trap_tag_group(struct spu *spu)
+{
+ pr_debug("%s\n", __FUNCTION__);
+ /* wake_up(&spu->dma_wq); */
+ return 0;
+}
+
+static int __spu_trap_spubox(struct spu *spu)
+{
+ if (spu->wbox_callback)
+ spu->wbox_callback(spu);
+
+ /* atomically disable SPU mailbox interrupts */
+ spin_lock(&spu->register_lock);
+ spu_int_mask_and(spu, 2, ~0x10);
+ spin_unlock(&spu->register_lock);
+ return 0;
+}
+
+static irqreturn_t
+spu_irq_class_0(int irq, void *data, struct pt_regs *regs)
+{
+ struct spu *spu;
+
+ spu = data;
+ spu->class_0_pending = 1;
+ if (spu->stop_callback)
+ spu->stop_callback(spu);
+
+ return IRQ_HANDLED;
+}
+
+int
+spu_irq_class_0_bottom(struct spu *spu)
+{
+ unsigned long stat, mask;
+
+ spu->class_0_pending = 0;
+
+ mask = spu_int_mask_get(spu, 0);
+ stat = spu_int_stat_get(spu, 0);
+
+ stat &= mask;
+
+ if (stat & 1) /* invalid MFC DMA */
+ __spu_trap_invalid_dma(spu);
+
+ if (stat & 2) /* invalid DMA alignment */
+ __spu_trap_dma_align(spu);
+
+ if (stat & 4) /* error on SPU */
+ __spu_trap_error(spu);
+
+ spu_int_stat_clear(spu, 0, stat);
+
+ return (stat & 0x7) ? -EIO : 0;
+}
+EXPORT_SYMBOL_GPL(spu_irq_class_0_bottom);
+
+static irqreturn_t
+spu_irq_class_1(int irq, void *data, struct pt_regs *regs)
+{
+ struct spu *spu;
+ unsigned long stat, mask, dar, dsisr;
+
+ spu = data;
+
+ /* atomically read & clear class1 status. */
+ spin_lock(&spu->register_lock);
+ mask = spu_int_mask_get(spu, 1);
+ stat = spu_int_stat_get(spu, 1) & mask;
+ dar = spu_mfc_dar_get(spu);
+ dsisr = spu_mfc_dsisr_get(spu);
+ if (stat & 2) /* mapping fault */
+ spu_mfc_dsisr_set(spu, 0ul);
+ spu_int_stat_clear(spu, 1, stat);
+ spin_unlock(&spu->register_lock);
+
+ if (stat & 1) /* segment fault */
+ __spu_trap_data_seg(spu, dar);
+
+ if (stat & 2) { /* mapping fault */
+ __spu_trap_data_map(spu, dar, dsisr);
+ }
+
+ if (stat & 4) /* ls compare & suspend on get */
+ ;
+
+ if (stat & 8) /* ls compare & suspend on put */
+ ;
+
+ return stat ? IRQ_HANDLED : IRQ_NONE;
+}
+EXPORT_SYMBOL_GPL(spu_irq_class_1_bottom);
+
+static irqreturn_t
+spu_irq_class_2(int irq, void *data, struct pt_regs *regs)
+{
+ struct spu *spu;
+ unsigned long stat;
+ unsigned long mask;
+
+ spu = data;
+ stat = spu_int_stat_get(spu, 2);
+ mask = spu_int_mask_get(spu, 2);
+
+ pr_debug("class 2 interrupt %d, %lx, %lx\n", irq, stat, mask);
+
+ stat &= mask;
+
+ if (stat & 1) /* PPC core mailbox */
+ __spu_trap_mailbox(spu);
+
+ if (stat & 2) /* SPU stop-and-signal */
+ __spu_trap_stop(spu);
+
+ if (stat & 4) /* SPU halted */
+ __spu_trap_halt(spu);
+
+ if (stat & 8) /* DMA tag group complete */
+ __spu_trap_tag_group(spu);
+
+ if (stat & 0x10) /* SPU mailbox threshold */
+ __spu_trap_spubox(spu);
+
+ spu_int_stat_clear(spu, 2, stat);
+ return stat ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int
+spu_request_irqs(struct spu *spu)
+{
+ int ret;
+ int irq_base;
+
+ irq_base = IIC_NODE_STRIDE * spu->node + IIC_SPE_OFFSET;
+
+ snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0", spu->number);
+ ret = request_irq(irq_base + spu->isrc,
+ spu_irq_class_0, 0, spu->irq_c0, spu);
+ if (ret)
+ goto out;
+
+ snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1", spu->number);
+ ret = request_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc,
+ spu_irq_class_1, 0, spu->irq_c1, spu);
+ if (ret)
+ goto out1;
+
+ snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2", spu->number);
+ ret = request_irq(irq_base + 2*IIC_CLASS_STRIDE + spu->isrc,
+ spu_irq_class_2, 0, spu->irq_c2, spu);
+ if (ret)
+ goto out2;
+ goto out;
+
+out2:
+ free_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc, spu);
+out1:
+ free_irq(irq_base + spu->isrc, spu);
+out:
+ return ret;
+}
+
+static void
+spu_free_irqs(struct spu *spu)
+{
+ int irq_base;
+
+ irq_base = IIC_NODE_STRIDE * spu->node + IIC_SPE_OFFSET;
+
+ free_irq(irq_base + spu->isrc, spu);
+ free_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc, spu);
+ free_irq(irq_base + 2*IIC_CLASS_STRIDE + spu->isrc, spu);
+}
+
+static LIST_HEAD(spu_list);
+static DECLARE_MUTEX(spu_mutex);
+
+static void spu_init_channels(struct spu *spu)
+{
+ static const struct {
+ unsigned channel;
+ unsigned count;
+ } zero_list[] = {
+ { 0x00, 1, }, { 0x01, 1, }, { 0x03, 1, }, { 0x04, 1, },
+ { 0x18, 1, }, { 0x19, 1, }, { 0x1b, 1, }, { 0x1d, 1, },
+ }, count_list[] = {
+ { 0x00, 0, }, { 0x03, 0, }, { 0x04, 0, }, { 0x15, 16, },
+ { 0x17, 1, }, { 0x18, 0, }, { 0x19, 0, }, { 0x1b, 0, },
+ { 0x1c, 1, }, { 0x1d, 0, }, { 0x1e, 1, },
+ };
+ struct spu_priv2 __iomem *priv2;
+ int i;
+
+ priv2 = spu->priv2;
+
+ /* initialize all channel data to zero */
+ for (i = 0; i < ARRAY_SIZE(zero_list); i++) {
+ int count;
+
+ out_be64(&priv2->spu_chnlcntptr_RW, zero_list[i].channel);
+ for (count = 0; count < zero_list[i].count; count++)
+ out_be64(&priv2->spu_chnldata_RW, 0);
+ }
+
+ /* initialize channel counts to meaningful values */
+ for (i = 0; i < ARRAY_SIZE(count_list); i++) {
+ out_be64(&priv2->spu_chnlcntptr_RW, count_list[i].channel);
+ out_be64(&priv2->spu_chnlcnt_RW, count_list[i].count);
+ }
+}
+
+struct spu *spu_alloc(void)
+{
+ struct spu *spu;
+
+ down(&spu_mutex);
+ if (!list_empty(&spu_list)) {
+ spu = list_entry(spu_list.next, struct spu, list);
+ list_del_init(&spu->list);
+ pr_debug("Got SPU %x %d\n", spu->isrc, spu->number);
+ } else {
+ pr_debug("No SPU left\n");
+ spu = NULL;
+ }
+ up(&spu_mutex);
+
+ if (spu)
+ spu_init_channels(spu);
+
+ return spu;
+}
+EXPORT_SYMBOL_GPL(spu_alloc);
+
+void spu_free(struct spu *spu)
+{
+ down(&spu_mutex);
+ list_add_tail(&spu->list, &spu_list);
+ up(&spu_mutex);
+}
+EXPORT_SYMBOL_GPL(spu_free);
+
+static int spu_handle_mm_fault(struct spu *spu)
+{
+ struct mm_struct *mm = spu->mm;
+ struct vm_area_struct *vma;
+ u64 ea, dsisr, is_write;
+ int ret;
+
+ ea = spu->dar;
+ dsisr = spu->dsisr;
+#if 0
+ if (!IS_VALID_EA(ea)) {
+ return -EFAULT;
+ }
+#endif /* XXX */
+ if (mm == NULL) {
+ return -EFAULT;
+ }
+ if (mm->pgd == NULL) {
+ return -EFAULT;
+ }
+
+ down_read(&mm->mmap_sem);
+ vma = find_vma(mm, ea);
+ if (!vma)
+ goto bad_area;
+ if (vma->vm_start <= ea)
+ goto good_area;
+ if (!(vma->vm_flags & VM_GROWSDOWN))
+ goto bad_area;
+#if 0
+ if (expand_stack(vma, ea))
+ goto bad_area;
+#endif /* XXX */
+good_area:
+ is_write = dsisr & MFC_DSISR_ACCESS_PUT;
+ if (is_write) {
+ if (!(vma->vm_flags & VM_WRITE))
+ goto bad_area;
+ } else {
+ if (dsisr & MFC_DSISR_ACCESS_DENIED)
+ goto bad_area;
+ if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+ goto bad_area;
+ }
+ ret = 0;
+ switch (handle_mm_fault(mm, vma, ea, is_write)) {
+ case VM_FAULT_MINOR:
+ current->min_flt++;
+ break;
+ case VM_FAULT_MAJOR:
+ current->maj_flt++;
+ break;
+ case VM_FAULT_SIGBUS:
+ ret = -EFAULT;
+ goto bad_area;
+ case VM_FAULT_OOM:
+ ret = -ENOMEM;
+ goto bad_area;
+ default:
+ BUG();
+ }
+ up_read(&mm->mmap_sem);
+ return ret;
+
+bad_area:
+ up_read(&mm->mmap_sem);
+ return -EFAULT;
+}
+
+int spu_irq_class_1_bottom(struct spu *spu)
+{
+ u64 ea, dsisr, access, error = 0UL;
+ int ret = 0;
+
+ ea = spu->dar;
+ dsisr = spu->dsisr;
+ if (dsisr & MFC_DSISR_PTE_NOT_FOUND) {
+ access = (_PAGE_PRESENT | _PAGE_USER);
+ access |= (dsisr & MFC_DSISR_ACCESS_PUT) ? _PAGE_RW : 0UL;
+ if (hash_page(ea, access, 0x300) != 0)
+ error |= CLASS1_ENABLE_STORAGE_FAULT_INTR;
+ }
+ if ((error & CLASS1_ENABLE_STORAGE_FAULT_INTR) ||
+ (dsisr & MFC_DSISR_ACCESS_DENIED)) {
+ if ((ret = spu_handle_mm_fault(spu)) != 0)
+ error |= CLASS1_ENABLE_STORAGE_FAULT_INTR;
+ else
+ error &= ~CLASS1_ENABLE_STORAGE_FAULT_INTR;
+ }
+ spu->dar = 0UL;
+ spu->dsisr = 0UL;
+ if (!error) {
+ spu_restart_dma(spu);
+ } else {
+ __spu_trap_invalid_dma(spu);
+ }
+ return ret;
+}
+
+void spu_irq_setaffinity(struct spu *spu, int cpu)
+{
+ u64 target = iic_get_target_id(cpu);
+ u64 route = target << 48 | target << 32 | target << 16;
+ spu_int_route_set(spu, route);
+}
+EXPORT_SYMBOL_GPL(spu_irq_setaffinity);
+
+static void __iomem * __init map_spe_prop(struct device_node *n,
+ const char *name)
+{
+ struct address_prop {
+ unsigned long address;
+ unsigned int len;
+ } __attribute__((packed)) *prop;
+
+ void *p;
+ int proplen;
+
+ p = get_property(n, name, &proplen);
+ if (proplen != sizeof (struct address_prop))
+ return NULL;
+
+ prop = p;
+
+ return ioremap(prop->address, prop->len);
+}
+
+static void spu_unmap(struct spu *spu)
+{
+ iounmap(spu->priv2);
+ iounmap(spu->priv1);
+ iounmap(spu->problem);
+ iounmap((u8 __iomem *)spu->local_store);
+}
+
+static int __init spu_map_device(struct spu *spu, struct device_node *spe)
+{
+ char *prop;
+ int ret;
+
+ ret = -ENODEV;
+ prop = get_property(spe, "isrc", NULL);
+ if (!prop)
+ goto out;
+ spu->isrc = *(unsigned int *)prop;
+
+ spu->name = get_property(spe, "name", NULL);
+ if (!spu->name)
+ goto out;
+
+ prop = get_property(spe, "local-store", NULL);
+ if (!prop)
+ goto out;
+ spu->local_store_phys = *(unsigned long *)prop;
+
+ /* we use local store as ram, not io memory */
+ spu->local_store = (void __force *)map_spe_prop(spe, "local-store");
+ if (!spu->local_store)
+ goto out;
+
+ spu->problem= map_spe_prop(spe, "problem");
+ if (!spu->problem)
+ goto out_unmap;
+
+ spu->priv1= map_spe_prop(spe, "priv1");
+ /* priv1 is not available on a hypervisor */
+
+ spu->priv2= map_spe_prop(spe, "priv2");
+ if (!spu->priv2)
+ goto out_unmap;
+ ret = 0;
+ goto out;
+
+out_unmap:
+ spu_unmap(spu);
+out:
+ return ret;
+}
+
+static int __init find_spu_node_id(struct device_node *spe)
+{
+ unsigned int *id;
+ struct device_node *cpu;
+
+ cpu = spe->parent->parent;
+ id = (unsigned int *)get_property(cpu, "node-id", NULL);
+
+ return id ? *id : 0;
+}
+
+static int __init create_spu(struct device_node *spe)
+{
+ struct spu *spu;
+ int ret;
+ static int number;
+
+ ret = -ENOMEM;
+ spu = kmalloc(sizeof (*spu), GFP_KERNEL);
+ if (!spu)
+ goto out;
+
+ ret = spu_map_device(spu, spe);
+ if (ret)
+ goto out_free;
+
+ spu->node = find_spu_node_id(spe);
+ spu->stop_code = 0;
+ spu->slb_replace = 0;
+ spu->mm = NULL;
+ spu->ctx = NULL;
+ spu->rq = NULL;
+ spu->pid = 0;
+ spu->class_0_pending = 0;
+ spu->flags = 0UL;
+ spu->dar = 0UL;
+ spu->dsisr = 0UL;
+ spin_lock_init(&spu->register_lock);
+
+ spu_mfc_sdr_set(spu, mfspr(SPRN_SDR1));
+ spu_mfc_sr1_set(spu, 0x33);
+
+ spu->ibox_callback = NULL;
+ spu->wbox_callback = NULL;
+ spu->stop_callback = NULL;
+
+ down(&spu_mutex);
+ spu->number = number++;
+ ret = spu_request_irqs(spu);
+ if (ret)
+ goto out_unmap;
+
+ list_add(&spu->list, &spu_list);
+ up(&spu_mutex);
+
+ pr_debug(KERN_DEBUG "Using SPE %s %02x %p %p %p %p %d\n",
+ spu->name, spu->isrc, spu->local_store,
+ spu->problem, spu->priv1, spu->priv2, spu->number);
+ goto out;
+
+out_unmap:
+ up(&spu_mutex);
+ spu_unmap(spu);
+out_free:
+ kfree(spu);
+out:
+ return ret;
+}
+
+static void destroy_spu(struct spu *spu)
+{
+ list_del_init(&spu->list);
+
+ spu_free_irqs(spu);
+ spu_unmap(spu);
+ kfree(spu);
+}
+
+static void cleanup_spu_base(void)
+{
+ struct spu *spu, *tmp;
+ down(&spu_mutex);
+ list_for_each_entry_safe(spu, tmp, &spu_list, list)
+ destroy_spu(spu);
+ up(&spu_mutex);
+}
+module_exit(cleanup_spu_base);
+
+static int __init init_spu_base(void)
+{
+ struct device_node *node;
+ int ret;
+
+ ret = -ENODEV;
+ for (node = of_find_node_by_type(NULL, "spe");
+ node; node = of_find_node_by_type(node, "spe")) {
+ ret = create_spu(node);
+ if (ret) {
+ printk(KERN_WARNING "%s: Error initializing %s\n",
+ __FUNCTION__, node->name);
+ cleanup_spu_base();
+ break;
+ }
+ }
+ /* in some old firmware versions, the spe is called 'spc', so we
+ look for that as well */
+ for (node = of_find_node_by_type(NULL, "spc");
+ node; node = of_find_node_by_type(node, "spc")) {
+ ret = create_spu(node);
+ if (ret) {
+ printk(KERN_WARNING "%s: Error initializing %s\n",
+ __FUNCTION__, node->name);
+ cleanup_spu_base();
+ break;
+ }
+ }
+ return ret;
+}
+module_init(init_spu_base);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Arnd Bergmann <arndb@de.ibm.com>");
diff --git a/arch/powerpc/platforms/cell/spu_priv1.c b/arch/powerpc/platforms/cell/spu_priv1.c
new file mode 100644
index 000000000000..b2656421c7b5
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spu_priv1.c
@@ -0,0 +1,133 @@
+/*
+ * access to SPU privileged registers
+ */
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/spu.h>
+
+void spu_int_mask_and(struct spu *spu, int class, u64 mask)
+{
+ u64 old_mask;
+
+ old_mask = in_be64(&spu->priv1->int_mask_RW[class]);
+ out_be64(&spu->priv1->int_mask_RW[class], old_mask & mask);
+}
+EXPORT_SYMBOL_GPL(spu_int_mask_and);
+
+void spu_int_mask_or(struct spu *spu, int class, u64 mask)
+{
+ u64 old_mask;
+
+ old_mask = in_be64(&spu->priv1->int_mask_RW[class]);
+ out_be64(&spu->priv1->int_mask_RW[class], old_mask | mask);
+}
+EXPORT_SYMBOL_GPL(spu_int_mask_or);
+
+void spu_int_mask_set(struct spu *spu, int class, u64 mask)
+{
+ out_be64(&spu->priv1->int_mask_RW[class], mask);
+}
+EXPORT_SYMBOL_GPL(spu_int_mask_set);
+
+u64 spu_int_mask_get(struct spu *spu, int class)
+{
+ return in_be64(&spu->priv1->int_mask_RW[class]);
+}
+EXPORT_SYMBOL_GPL(spu_int_mask_get);
+
+void spu_int_stat_clear(struct spu *spu, int class, u64 stat)
+{
+ out_be64(&spu->priv1->int_stat_RW[class], stat);
+}
+EXPORT_SYMBOL_GPL(spu_int_stat_clear);
+
+u64 spu_int_stat_get(struct spu *spu, int class)
+{
+ return in_be64(&spu->priv1->int_stat_RW[class]);
+}
+EXPORT_SYMBOL_GPL(spu_int_stat_get);
+
+void spu_int_route_set(struct spu *spu, u64 route)
+{
+ out_be64(&spu->priv1->int_route_RW, route);
+}
+EXPORT_SYMBOL_GPL(spu_int_route_set);
+
+u64 spu_mfc_dar_get(struct spu *spu)
+{
+ return in_be64(&spu->priv1->mfc_dar_RW);
+}
+EXPORT_SYMBOL_GPL(spu_mfc_dar_get);
+
+u64 spu_mfc_dsisr_get(struct spu *spu)
+{
+ return in_be64(&spu->priv1->mfc_dsisr_RW);
+}
+EXPORT_SYMBOL_GPL(spu_mfc_dsisr_get);
+
+void spu_mfc_dsisr_set(struct spu *spu, u64 dsisr)
+{
+ out_be64(&spu->priv1->mfc_dsisr_RW, dsisr);
+}
+EXPORT_SYMBOL_GPL(spu_mfc_dsisr_set);
+
+void spu_mfc_sdr_set(struct spu *spu, u64 sdr)
+{
+ out_be64(&spu->priv1->mfc_sdr_RW, sdr);
+}
+EXPORT_SYMBOL_GPL(spu_mfc_sdr_set);
+
+void spu_mfc_sr1_set(struct spu *spu, u64 sr1)
+{
+ out_be64(&spu->priv1->mfc_sr1_RW, sr1);
+}
+EXPORT_SYMBOL_GPL(spu_mfc_sr1_set);
+
+u64 spu_mfc_sr1_get(struct spu *spu)
+{
+ return in_be64(&spu->priv1->mfc_sr1_RW);
+}
+EXPORT_SYMBOL_GPL(spu_mfc_sr1_get);
+
+void spu_mfc_tclass_id_set(struct spu *spu, u64 tclass_id)
+{
+ out_be64(&spu->priv1->mfc_tclass_id_RW, tclass_id);
+}
+EXPORT_SYMBOL_GPL(spu_mfc_tclass_id_set);
+
+u64 spu_mfc_tclass_id_get(struct spu *spu)
+{
+ return in_be64(&spu->priv1->mfc_tclass_id_RW);
+}
+EXPORT_SYMBOL_GPL(spu_mfc_tclass_id_get);
+
+void spu_tlb_invalidate(struct spu *spu)
+{
+ out_be64(&spu->priv1->tlb_invalidate_entry_W, 0ul);
+}
+EXPORT_SYMBOL_GPL(spu_tlb_invalidate);
+
+void spu_resource_allocation_groupID_set(struct spu *spu, u64 id)
+{
+ out_be64(&spu->priv1->resource_allocation_groupID_RW, id);
+}
+EXPORT_SYMBOL_GPL(spu_resource_allocation_groupID_set);
+
+u64 spu_resource_allocation_groupID_get(struct spu *spu)
+{
+ return in_be64(&spu->priv1->resource_allocation_groupID_RW);
+}
+EXPORT_SYMBOL_GPL(spu_resource_allocation_groupID_get);
+
+void spu_resource_allocation_enable_set(struct spu *spu, u64 enable)
+{
+ out_be64(&spu->priv1->resource_allocation_enable_RW, enable);
+}
+EXPORT_SYMBOL_GPL(spu_resource_allocation_enable_set);
+
+u64 spu_resource_allocation_enable_get(struct spu *spu)
+{
+ return in_be64(&spu->priv1->resource_allocation_enable_RW);
+}
+EXPORT_SYMBOL_GPL(spu_resource_allocation_enable_get);
diff --git a/arch/powerpc/platforms/cell/spu_syscalls.c b/arch/powerpc/platforms/cell/spu_syscalls.c
new file mode 100644
index 000000000000..261b507a901a
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spu_syscalls.c
@@ -0,0 +1,88 @@
+/*
+ * SPU file system -- system call stubs
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * Author: Arnd Bergmann <arndb@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/file.h>
+#include <linux/module.h>
+#include <linux/syscalls.h>
+
+#include <asm/spu.h>
+
+struct spufs_calls spufs_calls = {
+ .owner = NULL,
+};
+
+/* These stub syscalls are needed to have the actual implementation
+ * within a loadable module. When spufs is built into the kernel,
+ * this file is not used and the syscalls directly enter the fs code */
+
+asmlinkage long sys_spu_create(const char __user *name,
+ unsigned int flags, mode_t mode)
+{
+ long ret;
+ struct module *owner = spufs_calls.owner;
+
+ ret = -ENOSYS;
+ if (owner && try_module_get(owner)) {
+ ret = spufs_calls.create_thread(name, flags, mode);
+ module_put(owner);
+ }
+ return ret;
+}
+
+asmlinkage long sys_spu_run(int fd, __u32 __user *unpc, __u32 __user *ustatus)
+{
+ long ret;
+ struct file *filp;
+ int fput_needed;
+ struct module *owner = spufs_calls.owner;
+
+ ret = -ENOSYS;
+ if (owner && try_module_get(owner)) {
+ ret = -EBADF;
+ filp = fget_light(fd, &fput_needed);
+ if (filp) {
+ ret = spufs_calls.spu_run(filp, unpc, ustatus);
+ fput_light(filp, fput_needed);
+ }
+ module_put(owner);
+ }
+ return ret;
+}
+
+int register_spu_syscalls(struct spufs_calls *calls)
+{
+ if (spufs_calls.owner)
+ return -EBUSY;
+
+ spufs_calls.create_thread = calls->create_thread;
+ spufs_calls.spu_run = calls->spu_run;
+ smp_mb();
+ spufs_calls.owner = calls->owner;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(register_spu_syscalls);
+
+void unregister_spu_syscalls(struct spufs_calls *calls)
+{
+ BUG_ON(spufs_calls.owner != calls->owner);
+ spufs_calls.owner = NULL;
+}
+EXPORT_SYMBOL_GPL(unregister_spu_syscalls);
diff --git a/arch/powerpc/platforms/cell/spufs/Makefile b/arch/powerpc/platforms/cell/spufs/Makefile
new file mode 100644
index 000000000000..a7cddf40e3d9
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spufs/Makefile
@@ -0,0 +1,54 @@
+obj-$(CONFIG_SPU_FS) += spufs.o
+spufs-y += inode.o file.o context.o switch.o syscalls.o
+spufs-y += sched.o backing_ops.o hw_ops.o run.o
+
+# Rules to build switch.o with the help of SPU tool chain
+SPU_CROSS := spu-
+SPU_CC := $(SPU_CROSS)gcc
+SPU_AS := $(SPU_CROSS)gcc
+SPU_LD := $(SPU_CROSS)ld
+SPU_OBJCOPY := $(SPU_CROSS)objcopy
+SPU_CFLAGS := -O2 -Wall -I$(srctree)/include -I$(objtree)/include2
+SPU_AFLAGS := -c -D__ASSEMBLY__ -I$(srctree)/include -I$(objtree)/include2
+SPU_LDFLAGS := -N -Ttext=0x0
+
+$(obj)/switch.o: $(obj)/spu_save_dump.h $(obj)/spu_restore_dump.h
+
+# Compile SPU files
+ cmd_spu_cc = $(SPU_CC) $(SPU_CFLAGS) -c -o $@ $<
+quiet_cmd_spu_cc = SPU_CC $@
+$(obj)/spu_%.o: $(src)/spu_%.c
+ $(call if_changed,spu_cc)
+
+# Assemble SPU files
+ cmd_spu_as = $(SPU_AS) $(SPU_AFLAGS) -o $@ $<
+quiet_cmd_spu_as = SPU_AS $@
+$(obj)/spu_%.o: $(src)/spu_%.S
+ $(call if_changed,spu_as)
+
+# Link SPU Executables
+ cmd_spu_ld = $(SPU_LD) $(SPU_LDFLAGS) -o $@ $^
+quiet_cmd_spu_ld = SPU_LD $@
+$(obj)/spu_%: $(obj)/spu_%_crt0.o $(obj)/spu_%.o
+ $(call if_changed,spu_ld)
+
+# Copy into binary format
+ cmd_spu_objcopy = $(SPU_OBJCOPY) -O binary $< $@
+quiet_cmd_spu_objcopy = OBJCOPY $@
+$(obj)/spu_%.bin: $(src)/spu_%
+ $(call if_changed,spu_objcopy)
+
+# create C code from ELF executable
+cmd_hexdump = ( \
+ echo "/*" ; \
+ echo " * $*_dump.h: Copyright (C) 2005 IBM." ; \
+ echo " * Hex-dump auto generated from $*.c." ; \
+ echo " * Do not edit!" ; \
+ echo " */" ; \
+ echo "static unsigned int $*_code[] __page_aligned = {" ; \
+ hexdump -v -e '"0x" 4/1 "%02x" "," "\n"' $< ; \
+ echo "};" ; \
+ ) > $@
+quiet_cmd_hexdump = HEXDUMP $@
+$(obj)/%_dump.h: $(obj)/%.bin
+ $(call if_changed,hexdump)
diff --git a/arch/powerpc/platforms/cell/spufs/backing_ops.c b/arch/powerpc/platforms/cell/spufs/backing_ops.c
new file mode 100644
index 000000000000..a5c489a53c61
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spufs/backing_ops.c
@@ -0,0 +1,308 @@
+/* backing_ops.c - query/set operations on saved SPU context.
+ *
+ * Copyright (C) IBM 2005
+ * Author: Mark Nutter <mnutter@us.ibm.com>
+ *
+ * These register operations allow SPUFS to operate on saved
+ * SPU contexts rather than hardware.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/poll.h>
+
+#include <asm/io.h>
+#include <asm/spu.h>
+#include <asm/spu_csa.h>
+#include <asm/mmu_context.h>
+#include "spufs.h"
+
+/*
+ * Reads/writes to various problem and priv2 registers require
+ * state changes, i.e. generate SPU events, modify channel
+ * counts, etc.
+ */
+
+static void gen_spu_event(struct spu_context *ctx, u32 event)
+{
+ u64 ch0_cnt;
+ u64 ch0_data;
+ u64 ch1_data;
+
+ ch0_cnt = ctx->csa.spu_chnlcnt_RW[0];
+ ch0_data = ctx->csa.spu_chnldata_RW[0];
+ ch1_data = ctx->csa.spu_chnldata_RW[1];
+ ctx->csa.spu_chnldata_RW[0] |= event;
+ if ((ch0_cnt == 0) && !(ch0_data & event) && (ch1_data & event)) {
+ ctx->csa.spu_chnlcnt_RW[0] = 1;
+ }
+}
+
+static int spu_backing_mbox_read(struct spu_context *ctx, u32 * data)
+{
+ u32 mbox_stat;
+ int ret = 0;
+
+ spin_lock(&ctx->csa.register_lock);
+ mbox_stat = ctx->csa.prob.mb_stat_R;
+ if (mbox_stat & 0x0000ff) {
+ /* Read the first available word.
+ * Implementation note: the depth
+ * of pu_mb_R is currently 1.
+ */
+ *data = ctx->csa.prob.pu_mb_R;
+ ctx->csa.prob.mb_stat_R &= ~(0x0000ff);
+ ctx->csa.spu_chnlcnt_RW[28] = 1;
+ gen_spu_event(ctx, MFC_PU_MAILBOX_AVAILABLE_EVENT);
+ ret = 4;
+ }
+ spin_unlock(&ctx->csa.register_lock);
+ return ret;
+}
+
+static u32 spu_backing_mbox_stat_read(struct spu_context *ctx)
+{
+ return ctx->csa.prob.mb_stat_R;
+}
+
+static unsigned int spu_backing_mbox_stat_poll(struct spu_context *ctx,
+ unsigned int events)
+{
+ int ret;
+ u32 stat;
+
+ ret = 0;
+ spin_lock_irq(&ctx->csa.register_lock);
+ stat = ctx->csa.prob.mb_stat_R;
+
+ /* if the requested event is there, return the poll
+ mask, otherwise enable the interrupt to get notified,
+ but first mark any pending interrupts as done so
+ we don't get woken up unnecessarily */
+
+ if (events & (POLLIN | POLLRDNORM)) {
+ if (stat & 0xff0000)
+ ret |= POLLIN | POLLRDNORM;
+ else {
+ ctx->csa.priv1.int_stat_class0_RW &= ~0x1;
+ ctx->csa.priv1.int_mask_class2_RW |= 0x1;
+ }
+ }
+ if (events & (POLLOUT | POLLWRNORM)) {
+ if (stat & 0x00ff00)
+ ret = POLLOUT | POLLWRNORM;
+ else {
+ ctx->csa.priv1.int_stat_class0_RW &= ~0x10;
+ ctx->csa.priv1.int_mask_class2_RW |= 0x10;
+ }
+ }
+ spin_unlock_irq(&ctx->csa.register_lock);
+ return ret;
+}
+
+static int spu_backing_ibox_read(struct spu_context *ctx, u32 * data)
+{
+ int ret;
+
+ spin_lock(&ctx->csa.register_lock);
+ if (ctx->csa.prob.mb_stat_R & 0xff0000) {
+ /* Read the first available word.
+ * Implementation note: the depth
+ * of puint_mb_R is currently 1.
+ */
+ *data = ctx->csa.priv2.puint_mb_R;
+ ctx->csa.prob.mb_stat_R &= ~(0xff0000);
+ ctx->csa.spu_chnlcnt_RW[30] = 1;
+ gen_spu_event(ctx, MFC_PU_INT_MAILBOX_AVAILABLE_EVENT);
+ ret = 4;
+ } else {
+ /* make sure we get woken up by the interrupt */
+ ctx->csa.priv1.int_mask_class2_RW |= 0x1UL;
+ ret = 0;
+ }
+ spin_unlock(&ctx->csa.register_lock);
+ return ret;
+}
+
+static int spu_backing_wbox_write(struct spu_context *ctx, u32 data)
+{
+ int ret;
+
+ spin_lock(&ctx->csa.register_lock);
+ if ((ctx->csa.prob.mb_stat_R) & 0x00ff00) {
+ int slot = ctx->csa.spu_chnlcnt_RW[29];
+ int avail = (ctx->csa.prob.mb_stat_R & 0x00ff00) >> 8;
+
+ /* We have space to write wbox_data.
+ * Implementation note: the depth
+ * of spu_mb_W is currently 4.
+ */
+ BUG_ON(avail != (4 - slot));
+ ctx->csa.spu_mailbox_data[slot] = data;
+ ctx->csa.spu_chnlcnt_RW[29] = ++slot;
+ ctx->csa.prob.mb_stat_R = (((4 - slot) & 0xff) << 8);
+ gen_spu_event(ctx, MFC_SPU_MAILBOX_WRITTEN_EVENT);
+ ret = 4;
+ } else {
+ /* make sure we get woken up by the interrupt when space
+ becomes available */
+ ctx->csa.priv1.int_mask_class2_RW |= 0x10;
+ ret = 0;
+ }
+ spin_unlock(&ctx->csa.register_lock);
+ return ret;
+}
+
+static u32 spu_backing_signal1_read(struct spu_context *ctx)
+{
+ return ctx->csa.spu_chnldata_RW[3];
+}
+
+static void spu_backing_signal1_write(struct spu_context *ctx, u32 data)
+{
+ spin_lock(&ctx->csa.register_lock);
+ if (ctx->csa.priv2.spu_cfg_RW & 0x1)
+ ctx->csa.spu_chnldata_RW[3] |= data;
+ else
+ ctx->csa.spu_chnldata_RW[3] = data;
+ ctx->csa.spu_chnlcnt_RW[3] = 1;
+ gen_spu_event(ctx, MFC_SIGNAL_1_EVENT);
+ spin_unlock(&ctx->csa.register_lock);
+}
+
+static u32 spu_backing_signal2_read(struct spu_context *ctx)
+{
+ return ctx->csa.spu_chnldata_RW[4];
+}
+
+static void spu_backing_signal2_write(struct spu_context *ctx, u32 data)
+{
+ spin_lock(&ctx->csa.register_lock);
+ if (ctx->csa.priv2.spu_cfg_RW & 0x2)
+ ctx->csa.spu_chnldata_RW[4] |= data;
+ else
+ ctx->csa.spu_chnldata_RW[4] = data;
+ ctx->csa.spu_chnlcnt_RW[4] = 1;
+ gen_spu_event(ctx, MFC_SIGNAL_2_EVENT);
+ spin_unlock(&ctx->csa.register_lock);
+}
+
+static void spu_backing_signal1_type_set(struct spu_context *ctx, u64 val)
+{
+ u64 tmp;
+
+ spin_lock(&ctx->csa.register_lock);
+ tmp = ctx->csa.priv2.spu_cfg_RW;
+ if (val)
+ tmp |= 1;
+ else
+ tmp &= ~1;
+ ctx->csa.priv2.spu_cfg_RW = tmp;
+ spin_unlock(&ctx->csa.register_lock);
+}
+
+static u64 spu_backing_signal1_type_get(struct spu_context *ctx)
+{
+ return ((ctx->csa.priv2.spu_cfg_RW & 1) != 0);
+}
+
+static void spu_backing_signal2_type_set(struct spu_context *ctx, u64 val)
+{
+ u64 tmp;
+
+ spin_lock(&ctx->csa.register_lock);
+ tmp = ctx->csa.priv2.spu_cfg_RW;
+ if (val)
+ tmp |= 2;
+ else
+ tmp &= ~2;
+ ctx->csa.priv2.spu_cfg_RW = tmp;
+ spin_unlock(&ctx->csa.register_lock);
+}
+
+static u64 spu_backing_signal2_type_get(struct spu_context *ctx)
+{
+ return ((ctx->csa.priv2.spu_cfg_RW & 2) != 0);
+}
+
+static u32 spu_backing_npc_read(struct spu_context *ctx)
+{
+ return ctx->csa.prob.spu_npc_RW;
+}
+
+static void spu_backing_npc_write(struct spu_context *ctx, u32 val)
+{
+ ctx->csa.prob.spu_npc_RW = val;
+}
+
+static u32 spu_backing_status_read(struct spu_context *ctx)
+{
+ return ctx->csa.prob.spu_status_R;
+}
+
+static char *spu_backing_get_ls(struct spu_context *ctx)
+{
+ return ctx->csa.lscsa->ls;
+}
+
+static void spu_backing_runcntl_write(struct spu_context *ctx, u32 val)
+{
+ spin_lock(&ctx->csa.register_lock);
+ ctx->csa.prob.spu_runcntl_RW = val;
+ if (val & SPU_RUNCNTL_RUNNABLE) {
+ ctx->csa.prob.spu_status_R |= SPU_STATUS_RUNNING;
+ } else {
+ ctx->csa.prob.spu_status_R &= ~SPU_STATUS_RUNNING;
+ }
+ spin_unlock(&ctx->csa.register_lock);
+}
+
+static void spu_backing_runcntl_stop(struct spu_context *ctx)
+{
+ spu_backing_runcntl_write(ctx, SPU_RUNCNTL_STOP);
+}
+
+struct spu_context_ops spu_backing_ops = {
+ .mbox_read = spu_backing_mbox_read,
+ .mbox_stat_read = spu_backing_mbox_stat_read,
+ .mbox_stat_poll = spu_backing_mbox_stat_poll,
+ .ibox_read = spu_backing_ibox_read,
+ .wbox_write = spu_backing_wbox_write,
+ .signal1_read = spu_backing_signal1_read,
+ .signal1_write = spu_backing_signal1_write,
+ .signal2_read = spu_backing_signal2_read,
+ .signal2_write = spu_backing_signal2_write,
+ .signal1_type_set = spu_backing_signal1_type_set,
+ .signal1_type_get = spu_backing_signal1_type_get,
+ .signal2_type_set = spu_backing_signal2_type_set,
+ .signal2_type_get = spu_backing_signal2_type_get,
+ .npc_read = spu_backing_npc_read,
+ .npc_write = spu_backing_npc_write,
+ .status_read = spu_backing_status_read,
+ .get_ls = spu_backing_get_ls,
+ .runcntl_write = spu_backing_runcntl_write,
+ .runcntl_stop = spu_backing_runcntl_stop,
+};
diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c
new file mode 100644
index 000000000000..336f238102fd
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spufs/context.c
@@ -0,0 +1,167 @@
+/*
+ * SPU file system -- SPU context management
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * Author: Arnd Bergmann <arndb@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <asm/spu.h>
+#include <asm/spu_csa.h>
+#include "spufs.h"
+
+struct spu_context *alloc_spu_context(struct address_space *local_store)
+{
+ struct spu_context *ctx;
+ ctx = kmalloc(sizeof *ctx, GFP_KERNEL);
+ if (!ctx)
+ goto out;
+ /* Binding to physical processor deferred
+ * until spu_activate().
+ */
+ spu_init_csa(&ctx->csa);
+ if (!ctx->csa.lscsa) {
+ goto out_free;
+ }
+ spin_lock_init(&ctx->mmio_lock);
+ kref_init(&ctx->kref);
+ init_rwsem(&ctx->state_sema);
+ init_MUTEX(&ctx->run_sema);
+ init_waitqueue_head(&ctx->ibox_wq);
+ init_waitqueue_head(&ctx->wbox_wq);
+ init_waitqueue_head(&ctx->stop_wq);
+ ctx->ibox_fasync = NULL;
+ ctx->wbox_fasync = NULL;
+ ctx->state = SPU_STATE_SAVED;
+ ctx->local_store = local_store;
+ ctx->spu = NULL;
+ ctx->ops = &spu_backing_ops;
+ ctx->owner = get_task_mm(current);
+ goto out;
+out_free:
+ kfree(ctx);
+ ctx = NULL;
+out:
+ return ctx;
+}
+
+void destroy_spu_context(struct kref *kref)
+{
+ struct spu_context *ctx;
+ ctx = container_of(kref, struct spu_context, kref);
+ down_write(&ctx->state_sema);
+ spu_deactivate(ctx);
+ ctx->ibox_fasync = NULL;
+ ctx->wbox_fasync = NULL;
+ up_write(&ctx->state_sema);
+ spu_fini_csa(&ctx->csa);
+ kfree(ctx);
+}
+
+struct spu_context * get_spu_context(struct spu_context *ctx)
+{
+ kref_get(&ctx->kref);
+ return ctx;
+}
+
+int put_spu_context(struct spu_context *ctx)
+{
+ return kref_put(&ctx->kref, &destroy_spu_context);
+}
+
+/* give up the mm reference when the context is about to be destroyed */
+void spu_forget(struct spu_context *ctx)
+{
+ struct mm_struct *mm;
+ spu_acquire_saved(ctx);
+ mm = ctx->owner;
+ ctx->owner = NULL;
+ mmput(mm);
+ spu_release(ctx);
+}
+
+void spu_acquire(struct spu_context *ctx)
+{
+ down_read(&ctx->state_sema);
+}
+
+void spu_release(struct spu_context *ctx)
+{
+ up_read(&ctx->state_sema);
+}
+
+void spu_unmap_mappings(struct spu_context *ctx)
+{
+ unmap_mapping_range(ctx->local_store, 0, LS_SIZE, 1);
+}
+
+int spu_acquire_runnable(struct spu_context *ctx)
+{
+ int ret = 0;
+
+ down_read(&ctx->state_sema);
+ if (ctx->state == SPU_STATE_RUNNABLE) {
+ ctx->spu->prio = current->prio;
+ return 0;
+ }
+ up_read(&ctx->state_sema);
+
+ down_write(&ctx->state_sema);
+ /* ctx is about to be freed, can't acquire any more */
+ if (!ctx->owner) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (ctx->state == SPU_STATE_SAVED) {
+ ret = spu_activate(ctx, 0);
+ if (ret)
+ goto out;
+ ctx->state = SPU_STATE_RUNNABLE;
+ }
+
+ downgrade_write(&ctx->state_sema);
+ /* On success, we return holding the lock */
+
+ return ret;
+out:
+ /* Release here, to simplify calling code. */
+ up_write(&ctx->state_sema);
+
+ return ret;
+}
+
+void spu_acquire_saved(struct spu_context *ctx)
+{
+ down_read(&ctx->state_sema);
+
+ if (ctx->state == SPU_STATE_SAVED)
+ return;
+
+ up_read(&ctx->state_sema);
+ down_write(&ctx->state_sema);
+
+ if (ctx->state == SPU_STATE_RUNNABLE) {
+ spu_deactivate(ctx);
+ ctx->state = SPU_STATE_SAVED;
+ }
+
+ downgrade_write(&ctx->state_sema);
+}
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
new file mode 100644
index 000000000000..dfa649c9b956
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -0,0 +1,794 @@
+/*
+ * SPU file system -- file contents
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * Author: Arnd Bergmann <arndb@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/fs.h>
+#include <linux/ioctl.h>
+#include <linux/module.h>
+#include <linux/pagemap.h>
+#include <linux/poll.h>
+#include <linux/ptrace.h>
+
+#include <asm/io.h>
+#include <asm/semaphore.h>
+#include <asm/spu.h>
+#include <asm/uaccess.h>
+
+#include "spufs.h"
+
+
+static int
+spufs_mem_open(struct inode *inode, struct file *file)
+{
+ struct spufs_inode_info *i = SPUFS_I(inode);
+ file->private_data = i->i_ctx;
+ file->f_mapping = i->i_ctx->local_store;
+ return 0;
+}
+
+static ssize_t
+spufs_mem_read(struct file *file, char __user *buffer,
+ size_t size, loff_t *pos)
+{
+ struct spu_context *ctx = file->private_data;
+ char *local_store;
+ int ret;
+
+ spu_acquire(ctx);
+
+ local_store = ctx->ops->get_ls(ctx);
+ ret = simple_read_from_buffer(buffer, size, pos, local_store, LS_SIZE);
+
+ spu_release(ctx);
+ return ret;
+}
+
+static ssize_t
+spufs_mem_write(struct file *file, const char __user *buffer,
+ size_t size, loff_t *pos)
+{
+ struct spu_context *ctx = file->private_data;
+ char *local_store;
+ int ret;
+
+ size = min_t(ssize_t, LS_SIZE - *pos, size);
+ if (size <= 0)
+ return -EFBIG;
+ *pos += size;
+
+ spu_acquire(ctx);
+
+ local_store = ctx->ops->get_ls(ctx);
+ ret = copy_from_user(local_store + *pos - size,
+ buffer, size) ? -EFAULT : size;
+
+ spu_release(ctx);
+ return ret;
+}
+
+#ifdef CONFIG_SPARSEMEM
+static struct page *
+spufs_mem_mmap_nopage(struct vm_area_struct *vma,
+ unsigned long address, int *type)
+{
+ struct page *page = NOPAGE_SIGBUS;
+
+ struct spu_context *ctx = vma->vm_file->private_data;
+ unsigned long offset = address - vma->vm_start;
+ offset += vma->vm_pgoff << PAGE_SHIFT;
+
+ spu_acquire(ctx);
+
+ if (ctx->state == SPU_STATE_SAVED)
+ page = vmalloc_to_page(ctx->csa.lscsa->ls + offset);
+ else
+ page = pfn_to_page((ctx->spu->local_store_phys + offset)
+ >> PAGE_SHIFT);
+
+ spu_release(ctx);
+
+ if (type)
+ *type = VM_FAULT_MINOR;
+
+ page_cache_get(page);
+ return page;
+}
+
+static struct vm_operations_struct spufs_mem_mmap_vmops = {
+ .nopage = spufs_mem_mmap_nopage,
+};
+
+static int
+spufs_mem_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ if (!(vma->vm_flags & VM_SHARED))
+ return -EINVAL;
+
+ /* FIXME: */
+ vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
+ | _PAGE_NO_CACHE);
+
+ vma->vm_ops = &spufs_mem_mmap_vmops;
+ return 0;
+}
+#endif
+
+static struct file_operations spufs_mem_fops = {
+ .open = spufs_mem_open,
+ .read = spufs_mem_read,
+ .write = spufs_mem_write,
+ .llseek = generic_file_llseek,
+#ifdef CONFIG_SPARSEMEM
+ .mmap = spufs_mem_mmap,
+#endif
+};
+
+static int
+spufs_regs_open(struct inode *inode, struct file *file)
+{
+ struct spufs_inode_info *i = SPUFS_I(inode);
+ file->private_data = i->i_ctx;
+ return 0;
+}
+
+static ssize_t
+spufs_regs_read(struct file *file, char __user *buffer,
+ size_t size, loff_t *pos)
+{
+ struct spu_context *ctx = file->private_data;
+ struct spu_lscsa *lscsa = ctx->csa.lscsa;
+ int ret;
+
+ spu_acquire_saved(ctx);
+
+ ret = simple_read_from_buffer(buffer, size, pos,
+ lscsa->gprs, sizeof lscsa->gprs);
+
+ spu_release(ctx);
+ return ret;
+}
+
+static ssize_t
+spufs_regs_write(struct file *file, const char __user *buffer,
+ size_t size, loff_t *pos)
+{
+ struct spu_context *ctx = file->private_data;
+ struct spu_lscsa *lscsa = ctx->csa.lscsa;
+ int ret;
+
+ size = min_t(ssize_t, sizeof lscsa->gprs - *pos, size);
+ if (size <= 0)
+ return -EFBIG;
+ *pos += size;
+
+ spu_acquire_saved(ctx);
+
+ ret = copy_from_user(lscsa->gprs + *pos - size,
+ buffer, size) ? -EFAULT : size;
+
+ spu_release(ctx);
+ return ret;
+}
+
+static struct file_operations spufs_regs_fops = {
+ .open = spufs_regs_open,
+ .read = spufs_regs_read,
+ .write = spufs_regs_write,
+ .llseek = generic_file_llseek,
+};
+
+static ssize_t
+spufs_fpcr_read(struct file *file, char __user * buffer,
+ size_t size, loff_t * pos)
+{
+ struct spu_context *ctx = file->private_data;
+ struct spu_lscsa *lscsa = ctx->csa.lscsa;
+ int ret;
+
+ spu_acquire_saved(ctx);
+
+ ret = simple_read_from_buffer(buffer, size, pos,
+ &lscsa->fpcr, sizeof(lscsa->fpcr));
+
+ spu_release(ctx);
+ return ret;
+}
+
+static ssize_t
+spufs_fpcr_write(struct file *file, const char __user * buffer,
+ size_t size, loff_t * pos)
+{
+ struct spu_context *ctx = file->private_data;
+ struct spu_lscsa *lscsa = ctx->csa.lscsa;
+ int ret;
+
+ size = min_t(ssize_t, sizeof(lscsa->fpcr) - *pos, size);
+ if (size <= 0)
+ return -EFBIG;
+ *pos += size;
+
+ spu_acquire_saved(ctx);
+
+ ret = copy_from_user((char *)&lscsa->fpcr + *pos - size,
+ buffer, size) ? -EFAULT : size;
+
+ spu_release(ctx);
+ return ret;
+}
+
+static struct file_operations spufs_fpcr_fops = {
+ .open = spufs_regs_open,
+ .read = spufs_fpcr_read,
+ .write = spufs_fpcr_write,
+ .llseek = generic_file_llseek,
+};
+
+/* generic open function for all pipe-like files */
+static int spufs_pipe_open(struct inode *inode, struct file *file)
+{
+ struct spufs_inode_info *i = SPUFS_I(inode);
+ file->private_data = i->i_ctx;
+
+ return nonseekable_open(inode, file);
+}
+
+static ssize_t spufs_mbox_read(struct file *file, char __user *buf,
+ size_t len, loff_t *pos)
+{
+ struct spu_context *ctx = file->private_data;
+ u32 mbox_data;
+ int ret;
+
+ if (len < 4)
+ return -EINVAL;
+
+ spu_acquire(ctx);
+ ret = ctx->ops->mbox_read(ctx, &mbox_data);
+ spu_release(ctx);
+
+ if (!ret)
+ return -EAGAIN;
+
+ if (copy_to_user(buf, &mbox_data, sizeof mbox_data))
+ return -EFAULT;
+
+ return 4;
+}
+
+static struct file_operations spufs_mbox_fops = {
+ .open = spufs_pipe_open,
+ .read = spufs_mbox_read,
+};
+
+static ssize_t spufs_mbox_stat_read(struct file *file, char __user *buf,
+ size_t len, loff_t *pos)
+{
+ struct spu_context *ctx = file->private_data;
+ u32 mbox_stat;
+
+ if (len < 4)
+ return -EINVAL;
+
+ spu_acquire(ctx);
+
+ mbox_stat = ctx->ops->mbox_stat_read(ctx) & 0xff;
+
+ spu_release(ctx);
+
+ if (copy_to_user(buf, &mbox_stat, sizeof mbox_stat))
+ return -EFAULT;
+
+ return 4;
+}
+
+static struct file_operations spufs_mbox_stat_fops = {
+ .open = spufs_pipe_open,
+ .read = spufs_mbox_stat_read,
+};
+
+/* low-level ibox access function */
+size_t spu_ibox_read(struct spu_context *ctx, u32 *data)
+{
+ return ctx->ops->ibox_read(ctx, data);
+}
+
+static int spufs_ibox_fasync(int fd, struct file *file, int on)
+{
+ struct spu_context *ctx = file->private_data;
+
+ return fasync_helper(fd, file, on, &ctx->ibox_fasync);
+}
+
+/* interrupt-level ibox callback function. */
+void spufs_ibox_callback(struct spu *spu)
+{
+ struct spu_context *ctx = spu->ctx;
+
+ wake_up_all(&ctx->ibox_wq);
+ kill_fasync(&ctx->ibox_fasync, SIGIO, POLLIN);
+}
+
+static ssize_t spufs_ibox_read(struct file *file, char __user *buf,
+ size_t len, loff_t *pos)
+{
+ struct spu_context *ctx = file->private_data;
+ u32 ibox_data;
+ ssize_t ret;
+
+ if (len < 4)
+ return -EINVAL;
+
+ spu_acquire(ctx);
+
+ ret = 0;
+ if (file->f_flags & O_NONBLOCK) {
+ if (!spu_ibox_read(ctx, &ibox_data))
+ ret = -EAGAIN;
+ } else {
+ ret = spufs_wait(ctx->ibox_wq, spu_ibox_read(ctx, &ibox_data));
+ }
+
+ spu_release(ctx);
+
+ if (ret)
+ return ret;
+
+ ret = 4;
+ if (copy_to_user(buf, &ibox_data, sizeof ibox_data))
+ ret = -EFAULT;
+
+ return ret;
+}
+
+static unsigned int spufs_ibox_poll(struct file *file, poll_table *wait)
+{
+ struct spu_context *ctx = file->private_data;
+ unsigned int mask;
+
+ poll_wait(file, &ctx->ibox_wq, wait);
+
+ spu_acquire(ctx);
+ mask = ctx->ops->mbox_stat_poll(ctx, POLLIN | POLLRDNORM);
+ spu_release(ctx);
+
+ return mask;
+}
+
+static struct file_operations spufs_ibox_fops = {
+ .open = spufs_pipe_open,
+ .read = spufs_ibox_read,
+ .poll = spufs_ibox_poll,
+ .fasync = spufs_ibox_fasync,
+};
+
+static ssize_t spufs_ibox_stat_read(struct file *file, char __user *buf,
+ size_t len, loff_t *pos)
+{
+ struct spu_context *ctx = file->private_data;
+ u32 ibox_stat;
+
+ if (len < 4)
+ return -EINVAL;
+
+ spu_acquire(ctx);
+ ibox_stat = (ctx->ops->mbox_stat_read(ctx) >> 16) & 0xff;
+ spu_release(ctx);
+
+ if (copy_to_user(buf, &ibox_stat, sizeof ibox_stat))
+ return -EFAULT;
+
+ return 4;
+}
+
+static struct file_operations spufs_ibox_stat_fops = {
+ .open = spufs_pipe_open,
+ .read = spufs_ibox_stat_read,
+};
+
+/* low-level mailbox write */
+size_t spu_wbox_write(struct spu_context *ctx, u32 data)
+{
+ return ctx->ops->wbox_write(ctx, data);
+}
+
+static int spufs_wbox_fasync(int fd, struct file *file, int on)
+{
+ struct spu_context *ctx = file->private_data;
+ int ret;
+
+ ret = fasync_helper(fd, file, on, &ctx->wbox_fasync);
+
+ return ret;
+}
+
+/* interrupt-level wbox callback function. */
+void spufs_wbox_callback(struct spu *spu)
+{
+ struct spu_context *ctx = spu->ctx;
+
+ wake_up_all(&ctx->wbox_wq);
+ kill_fasync(&ctx->wbox_fasync, SIGIO, POLLOUT);
+}
+
+static ssize_t spufs_wbox_write(struct file *file, const char __user *buf,
+ size_t len, loff_t *pos)
+{
+ struct spu_context *ctx = file->private_data;
+ u32 wbox_data;
+ int ret;
+
+ if (len < 4)
+ return -EINVAL;
+
+ if (copy_from_user(&wbox_data, buf, sizeof wbox_data))
+ return -EFAULT;
+
+ spu_acquire(ctx);
+
+ ret = 0;
+ if (file->f_flags & O_NONBLOCK) {
+ if (!spu_wbox_write(ctx, wbox_data))
+ ret = -EAGAIN;
+ } else {
+ ret = spufs_wait(ctx->wbox_wq, spu_wbox_write(ctx, wbox_data));
+ }
+
+ spu_release(ctx);
+
+ return ret ? ret : sizeof wbox_data;
+}
+
+static unsigned int spufs_wbox_poll(struct file *file, poll_table *wait)
+{
+ struct spu_context *ctx = file->private_data;
+ unsigned int mask;
+
+ poll_wait(file, &ctx->wbox_wq, wait);
+
+ spu_acquire(ctx);
+ mask = ctx->ops->mbox_stat_poll(ctx, POLLOUT | POLLWRNORM);
+ spu_release(ctx);
+
+ return mask;
+}
+
+static struct file_operations spufs_wbox_fops = {
+ .open = spufs_pipe_open,
+ .write = spufs_wbox_write,
+ .poll = spufs_wbox_poll,
+ .fasync = spufs_wbox_fasync,
+};
+
+static ssize_t spufs_wbox_stat_read(struct file *file, char __user *buf,
+ size_t len, loff_t *pos)
+{
+ struct spu_context *ctx = file->private_data;
+ u32 wbox_stat;
+
+ if (len < 4)
+ return -EINVAL;
+
+ spu_acquire(ctx);
+ wbox_stat = (ctx->ops->mbox_stat_read(ctx) >> 8) & 0xff;
+ spu_release(ctx);
+
+ if (copy_to_user(buf, &wbox_stat, sizeof wbox_stat))
+ return -EFAULT;
+
+ return 4;
+}
+
+static struct file_operations spufs_wbox_stat_fops = {
+ .open = spufs_pipe_open,
+ .read = spufs_wbox_stat_read,
+};
+
+static ssize_t spufs_signal1_read(struct file *file, char __user *buf,
+ size_t len, loff_t *pos)
+{
+ struct spu_context *ctx = file->private_data;
+ u32 data;
+
+ if (len < 4)
+ return -EINVAL;
+
+ spu_acquire(ctx);
+ data = ctx->ops->signal1_read(ctx);
+ spu_release(ctx);
+
+ if (copy_to_user(buf, &data, 4))
+ return -EFAULT;
+
+ return 4;
+}
+
+static ssize_t spufs_signal1_write(struct file *file, const char __user *buf,
+ size_t len, loff_t *pos)
+{
+ struct spu_context *ctx;
+ u32 data;
+
+ ctx = file->private_data;
+
+ if (len < 4)
+ return -EINVAL;
+
+ if (copy_from_user(&data, buf, 4))
+ return -EFAULT;
+
+ spu_acquire(ctx);
+ ctx->ops->signal1_write(ctx, data);
+ spu_release(ctx);
+
+ return 4;
+}
+
+static struct file_operations spufs_signal1_fops = {
+ .open = spufs_pipe_open,
+ .read = spufs_signal1_read,
+ .write = spufs_signal1_write,
+};
+
+static ssize_t spufs_signal2_read(struct file *file, char __user *buf,
+ size_t len, loff_t *pos)
+{
+ struct spu_context *ctx;
+ u32 data;
+
+ ctx = file->private_data;
+
+ if (len < 4)
+ return -EINVAL;
+
+ spu_acquire(ctx);
+ data = ctx->ops->signal2_read(ctx);
+ spu_release(ctx);
+
+ if (copy_to_user(buf, &data, 4))
+ return -EFAULT;
+
+ return 4;
+}
+
+static ssize_t spufs_signal2_write(struct file *file, const char __user *buf,
+ size_t len, loff_t *pos)
+{
+ struct spu_context *ctx;
+ u32 data;
+
+ ctx = file->private_data;
+
+ if (len < 4)
+ return -EINVAL;
+
+ if (copy_from_user(&data, buf, 4))
+ return -EFAULT;
+
+ spu_acquire(ctx);
+ ctx->ops->signal2_write(ctx, data);
+ spu_release(ctx);
+
+ return 4;
+}
+
+static struct file_operations spufs_signal2_fops = {
+ .open = spufs_pipe_open,
+ .read = spufs_signal2_read,
+ .write = spufs_signal2_write,
+};
+
+static void spufs_signal1_type_set(void *data, u64 val)
+{
+ struct spu_context *ctx = data;
+
+ spu_acquire(ctx);
+ ctx->ops->signal1_type_set(ctx, val);
+ spu_release(ctx);
+}
+
+static u64 spufs_signal1_type_get(void *data)
+{
+ struct spu_context *ctx = data;
+ u64 ret;
+
+ spu_acquire(ctx);
+ ret = ctx->ops->signal1_type_get(ctx);
+ spu_release(ctx);
+
+ return ret;
+}
+DEFINE_SIMPLE_ATTRIBUTE(spufs_signal1_type, spufs_signal1_type_get,
+ spufs_signal1_type_set, "%llu");
+
+static void spufs_signal2_type_set(void *data, u64 val)
+{
+ struct spu_context *ctx = data;
+
+ spu_acquire(ctx);
+ ctx->ops->signal2_type_set(ctx, val);
+ spu_release(ctx);
+}
+
+static u64 spufs_signal2_type_get(void *data)
+{
+ struct spu_context *ctx = data;
+ u64 ret;
+
+ spu_acquire(ctx);
+ ret = ctx->ops->signal2_type_get(ctx);
+ spu_release(ctx);
+
+ return ret;
+}
+DEFINE_SIMPLE_ATTRIBUTE(spufs_signal2_type, spufs_signal2_type_get,
+ spufs_signal2_type_set, "%llu");
+
+static void spufs_npc_set(void *data, u64 val)
+{
+ struct spu_context *ctx = data;
+ spu_acquire(ctx);
+ ctx->ops->npc_write(ctx, val);
+ spu_release(ctx);
+}
+
+static u64 spufs_npc_get(void *data)
+{
+ struct spu_context *ctx = data;
+ u64 ret;
+ spu_acquire(ctx);
+ ret = ctx->ops->npc_read(ctx);
+ spu_release(ctx);
+ return ret;
+}
+DEFINE_SIMPLE_ATTRIBUTE(spufs_npc_ops, spufs_npc_get, spufs_npc_set, "%llx\n")
+
+static void spufs_decr_set(void *data, u64 val)
+{
+ struct spu_context *ctx = data;
+ struct spu_lscsa *lscsa = ctx->csa.lscsa;
+ spu_acquire_saved(ctx);
+ lscsa->decr.slot[0] = (u32) val;
+ spu_release(ctx);
+}
+
+static u64 spufs_decr_get(void *data)
+{
+ struct spu_context *ctx = data;
+ struct spu_lscsa *lscsa = ctx->csa.lscsa;
+ u64 ret;
+ spu_acquire_saved(ctx);
+ ret = lscsa->decr.slot[0];
+ spu_release(ctx);
+ return ret;
+}
+DEFINE_SIMPLE_ATTRIBUTE(spufs_decr_ops, spufs_decr_get, spufs_decr_set,
+ "%llx\n")
+
+static void spufs_decr_status_set(void *data, u64 val)
+{
+ struct spu_context *ctx = data;
+ struct spu_lscsa *lscsa = ctx->csa.lscsa;
+ spu_acquire_saved(ctx);
+ lscsa->decr_status.slot[0] = (u32) val;
+ spu_release(ctx);
+}
+
+static u64 spufs_decr_status_get(void *data)
+{
+ struct spu_context *ctx = data;
+ struct spu_lscsa *lscsa = ctx->csa.lscsa;
+ u64 ret;
+ spu_acquire_saved(ctx);
+ ret = lscsa->decr_status.slot[0];
+ spu_release(ctx);
+ return ret;
+}
+DEFINE_SIMPLE_ATTRIBUTE(spufs_decr_status_ops, spufs_decr_status_get,
+ spufs_decr_status_set, "%llx\n")
+
+static void spufs_spu_tag_mask_set(void *data, u64 val)
+{
+ struct spu_context *ctx = data;
+ struct spu_lscsa *lscsa = ctx->csa.lscsa;
+ spu_acquire_saved(ctx);
+ lscsa->tag_mask.slot[0] = (u32) val;
+ spu_release(ctx);
+}
+
+static u64 spufs_spu_tag_mask_get(void *data)
+{
+ struct spu_context *ctx = data;
+ struct spu_lscsa *lscsa = ctx->csa.lscsa;
+ u64 ret;
+ spu_acquire_saved(ctx);
+ ret = lscsa->tag_mask.slot[0];
+ spu_release(ctx);
+ return ret;
+}
+DEFINE_SIMPLE_ATTRIBUTE(spufs_spu_tag_mask_ops, spufs_spu_tag_mask_get,
+ spufs_spu_tag_mask_set, "%llx\n")
+
+static void spufs_event_mask_set(void *data, u64 val)
+{
+ struct spu_context *ctx = data;
+ struct spu_lscsa *lscsa = ctx->csa.lscsa;
+ spu_acquire_saved(ctx);
+ lscsa->event_mask.slot[0] = (u32) val;
+ spu_release(ctx);
+}
+
+static u64 spufs_event_mask_get(void *data)
+{
+ struct spu_context *ctx = data;
+ struct spu_lscsa *lscsa = ctx->csa.lscsa;
+ u64 ret;
+ spu_acquire_saved(ctx);
+ ret = lscsa->event_mask.slot[0];
+ spu_release(ctx);
+ return ret;
+}
+DEFINE_SIMPLE_ATTRIBUTE(spufs_event_mask_ops, spufs_event_mask_get,
+ spufs_event_mask_set, "%llx\n")
+
+static void spufs_srr0_set(void *data, u64 val)
+{
+ struct spu_context *ctx = data;
+ struct spu_lscsa *lscsa = ctx->csa.lscsa;
+ spu_acquire_saved(ctx);
+ lscsa->srr0.slot[0] = (u32) val;
+ spu_release(ctx);
+}
+
+static u64 spufs_srr0_get(void *data)
+{
+ struct spu_context *ctx = data;
+ struct spu_lscsa *lscsa = ctx->csa.lscsa;
+ u64 ret;
+ spu_acquire_saved(ctx);
+ ret = lscsa->srr0.slot[0];
+ spu_release(ctx);
+ return ret;
+}
+DEFINE_SIMPLE_ATTRIBUTE(spufs_srr0_ops, spufs_srr0_get, spufs_srr0_set,
+ "%llx\n")
+
+struct tree_descr spufs_dir_contents[] = {
+ { "mem", &spufs_mem_fops, 0666, },
+ { "regs", &spufs_regs_fops, 0666, },
+ { "mbox", &spufs_mbox_fops, 0444, },
+ { "ibox", &spufs_ibox_fops, 0444, },
+ { "wbox", &spufs_wbox_fops, 0222, },
+ { "mbox_stat", &spufs_mbox_stat_fops, 0444, },
+ { "ibox_stat", &spufs_ibox_stat_fops, 0444, },
+ { "wbox_stat", &spufs_wbox_stat_fops, 0444, },
+ { "signal1", &spufs_signal1_fops, 0666, },
+ { "signal2", &spufs_signal2_fops, 0666, },
+ { "signal1_type", &spufs_signal1_type, 0666, },
+ { "signal2_type", &spufs_signal2_type, 0666, },
+ { "npc", &spufs_npc_ops, 0666, },
+ { "fpcr", &spufs_fpcr_fops, 0666, },
+ { "decr", &spufs_decr_ops, 0666, },
+ { "decr_status", &spufs_decr_status_ops, 0666, },
+ { "spu_tag_mask", &spufs_spu_tag_mask_ops, 0666, },
+ { "event_mask", &spufs_event_mask_ops, 0666, },
+ { "srr0", &spufs_srr0_ops, 0666, },
+ {},
+};
diff --git a/arch/powerpc/platforms/cell/spufs/hw_ops.c b/arch/powerpc/platforms/cell/spufs/hw_ops.c
new file mode 100644
index 000000000000..5445719bff79
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spufs/hw_ops.c
@@ -0,0 +1,255 @@
+/* hw_ops.c - query/set operations on active SPU context.
+ *
+ * Copyright (C) IBM 2005
+ * Author: Mark Nutter <mnutter@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/poll.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+
+#include <asm/io.h>
+#include <asm/spu.h>
+#include <asm/spu_csa.h>
+#include <asm/mmu_context.h>
+#include "spufs.h"
+
+static int spu_hw_mbox_read(struct spu_context *ctx, u32 * data)
+{
+ struct spu *spu = ctx->spu;
+ struct spu_problem __iomem *prob = spu->problem;
+ u32 mbox_stat;
+ int ret = 0;
+
+ spin_lock_irq(&spu->register_lock);
+ mbox_stat = in_be32(&prob->mb_stat_R);
+ if (mbox_stat & 0x0000ff) {
+ *data = in_be32(&prob->pu_mb_R);
+ ret = 4;
+ }
+ spin_unlock_irq(&spu->register_lock);
+ return ret;
+}
+
+static u32 spu_hw_mbox_stat_read(struct spu_context *ctx)
+{
+ return in_be32(&ctx->spu->problem->mb_stat_R);
+}
+
+static unsigned int spu_hw_mbox_stat_poll(struct spu_context *ctx,
+ unsigned int events)
+{
+ struct spu *spu = ctx->spu;
+ int ret = 0;
+ u32 stat;
+
+ spin_lock_irq(&spu->register_lock);
+ stat = in_be32(&spu->problem->mb_stat_R);
+
+ /* if the requested event is there, return the poll
+ mask, otherwise enable the interrupt to get notified,
+ but first mark any pending interrupts as done so
+ we don't get woken up unnecessarily */
+
+ if (events & (POLLIN | POLLRDNORM)) {
+ if (stat & 0xff0000)
+ ret |= POLLIN | POLLRDNORM;
+ else {
+ spu_int_stat_clear(spu, 2, 0x1);
+ spu_int_mask_or(spu, 2, 0x1);
+ }
+ }
+ if (events & (POLLOUT | POLLWRNORM)) {
+ if (stat & 0x00ff00)
+ ret = POLLOUT | POLLWRNORM;
+ else {
+ spu_int_stat_clear(spu, 2, 0x10);
+ spu_int_mask_or(spu, 2, 0x10);
+ }
+ }
+ spin_unlock_irq(&spu->register_lock);
+ return ret;
+}
+
+static int spu_hw_ibox_read(struct spu_context *ctx, u32 * data)
+{
+ struct spu *spu = ctx->spu;
+ struct spu_problem __iomem *prob = spu->problem;
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+ int ret;
+
+ spin_lock_irq(&spu->register_lock);
+ if (in_be32(&prob->mb_stat_R) & 0xff0000) {
+ /* read the first available word */
+ *data = in_be64(&priv2->puint_mb_R);
+ ret = 4;
+ } else {
+ /* make sure we get woken up by the interrupt */
+ spu_int_mask_or(spu, 2, 0x1);
+ ret = 0;
+ }
+ spin_unlock_irq(&spu->register_lock);
+ return ret;
+}
+
+static int spu_hw_wbox_write(struct spu_context *ctx, u32 data)
+{
+ struct spu *spu = ctx->spu;
+ struct spu_problem __iomem *prob = spu->problem;
+ int ret;
+
+ spin_lock_irq(&spu->register_lock);
+ if (in_be32(&prob->mb_stat_R) & 0x00ff00) {
+ /* we have space to write wbox_data to */
+ out_be32(&prob->spu_mb_W, data);
+ ret = 4;
+ } else {
+ /* make sure we get woken up by the interrupt when space
+ becomes available */
+ spu_int_mask_or(spu, 2, 0x10);
+ ret = 0;
+ }
+ spin_unlock_irq(&spu->register_lock);
+ return ret;
+}
+
+static u32 spu_hw_signal1_read(struct spu_context *ctx)
+{
+ return in_be32(&ctx->spu->problem->signal_notify1);
+}
+
+static void spu_hw_signal1_write(struct spu_context *ctx, u32 data)
+{
+ out_be32(&ctx->spu->problem->signal_notify1, data);
+}
+
+static u32 spu_hw_signal2_read(struct spu_context *ctx)
+{
+ return in_be32(&ctx->spu->problem->signal_notify1);
+}
+
+static void spu_hw_signal2_write(struct spu_context *ctx, u32 data)
+{
+ out_be32(&ctx->spu->problem->signal_notify2, data);
+}
+
+static void spu_hw_signal1_type_set(struct spu_context *ctx, u64 val)
+{
+ struct spu *spu = ctx->spu;
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+ u64 tmp;
+
+ spin_lock_irq(&spu->register_lock);
+ tmp = in_be64(&priv2->spu_cfg_RW);
+ if (val)
+ tmp |= 1;
+ else
+ tmp &= ~1;
+ out_be64(&priv2->spu_cfg_RW, tmp);
+ spin_unlock_irq(&spu->register_lock);
+}
+
+static u64 spu_hw_signal1_type_get(struct spu_context *ctx)
+{
+ return ((in_be64(&ctx->spu->priv2->spu_cfg_RW) & 1) != 0);
+}
+
+static void spu_hw_signal2_type_set(struct spu_context *ctx, u64 val)
+{
+ struct spu *spu = ctx->spu;
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+ u64 tmp;
+
+ spin_lock_irq(&spu->register_lock);
+ tmp = in_be64(&priv2->spu_cfg_RW);
+ if (val)
+ tmp |= 2;
+ else
+ tmp &= ~2;
+ out_be64(&priv2->spu_cfg_RW, tmp);
+ spin_unlock_irq(&spu->register_lock);
+}
+
+static u64 spu_hw_signal2_type_get(struct spu_context *ctx)
+{
+ return ((in_be64(&ctx->spu->priv2->spu_cfg_RW) & 2) != 0);
+}
+
+static u32 spu_hw_npc_read(struct spu_context *ctx)
+{
+ return in_be32(&ctx->spu->problem->spu_npc_RW);
+}
+
+static void spu_hw_npc_write(struct spu_context *ctx, u32 val)
+{
+ out_be32(&ctx->spu->problem->spu_npc_RW, val);
+}
+
+static u32 spu_hw_status_read(struct spu_context *ctx)
+{
+ return in_be32(&ctx->spu->problem->spu_status_R);
+}
+
+static char *spu_hw_get_ls(struct spu_context *ctx)
+{
+ return ctx->spu->local_store;
+}
+
+static void spu_hw_runcntl_write(struct spu_context *ctx, u32 val)
+{
+ eieio();
+ out_be32(&ctx->spu->problem->spu_runcntl_RW, val);
+}
+
+static void spu_hw_runcntl_stop(struct spu_context *ctx)
+{
+ spin_lock_irq(&ctx->spu->register_lock);
+ out_be32(&ctx->spu->problem->spu_runcntl_RW, SPU_RUNCNTL_STOP);
+ while (in_be32(&ctx->spu->problem->spu_status_R) & SPU_STATUS_RUNNING)
+ cpu_relax();
+ spin_unlock_irq(&ctx->spu->register_lock);
+}
+
+struct spu_context_ops spu_hw_ops = {
+ .mbox_read = spu_hw_mbox_read,
+ .mbox_stat_read = spu_hw_mbox_stat_read,
+ .mbox_stat_poll = spu_hw_mbox_stat_poll,
+ .ibox_read = spu_hw_ibox_read,
+ .wbox_write = spu_hw_wbox_write,
+ .signal1_read = spu_hw_signal1_read,
+ .signal1_write = spu_hw_signal1_write,
+ .signal2_read = spu_hw_signal2_read,
+ .signal2_write = spu_hw_signal2_write,
+ .signal1_type_set = spu_hw_signal1_type_set,
+ .signal1_type_get = spu_hw_signal1_type_get,
+ .signal2_type_set = spu_hw_signal2_type_set,
+ .signal2_type_get = spu_hw_signal2_type_get,
+ .npc_read = spu_hw_npc_read,
+ .npc_write = spu_hw_npc_write,
+ .status_read = spu_hw_status_read,
+ .get_ls = spu_hw_get_ls,
+ .runcntl_write = spu_hw_runcntl_write,
+ .runcntl_stop = spu_hw_runcntl_stop,
+};
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
new file mode 100644
index 000000000000..1f3507c75e90
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -0,0 +1,486 @@
+/*
+ * SPU file system
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * Author: Arnd Bergmann <arndb@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/backing-dev.h>
+#include <linux/init.h>
+#include <linux/ioctl.h>
+#include <linux/module.h>
+#include <linux/mount.h>
+#include <linux/namei.h>
+#include <linux/pagemap.h>
+#include <linux/poll.h>
+#include <linux/slab.h>
+#include <linux/parser.h>
+
+#include <asm/io.h>
+#include <asm/semaphore.h>
+#include <asm/spu.h>
+#include <asm/uaccess.h>
+
+#include "spufs.h"
+
+static kmem_cache_t *spufs_inode_cache;
+
+static struct inode *
+spufs_alloc_inode(struct super_block *sb)
+{
+ struct spufs_inode_info *ei;
+
+ ei = kmem_cache_alloc(spufs_inode_cache, SLAB_KERNEL);
+ if (!ei)
+ return NULL;
+ return &ei->vfs_inode;
+}
+
+static void
+spufs_destroy_inode(struct inode *inode)
+{
+ kmem_cache_free(spufs_inode_cache, SPUFS_I(inode));
+}
+
+static void
+spufs_init_once(void *p, kmem_cache_t * cachep, unsigned long flags)
+{
+ struct spufs_inode_info *ei = p;
+
+ if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
+ SLAB_CTOR_CONSTRUCTOR) {
+ inode_init_once(&ei->vfs_inode);
+ }
+}
+
+static struct inode *
+spufs_new_inode(struct super_block *sb, int mode)
+{
+ struct inode *inode;
+
+ inode = new_inode(sb);
+ if (!inode)
+ goto out;
+
+ inode->i_mode = mode;
+ inode->i_uid = current->fsuid;
+ inode->i_gid = current->fsgid;
+ inode->i_blksize = PAGE_CACHE_SIZE;
+ inode->i_blocks = 0;
+ inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+out:
+ return inode;
+}
+
+static int
+spufs_setattr(struct dentry *dentry, struct iattr *attr)
+{
+ struct inode *inode = dentry->d_inode;
+
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ (attr->ia_size != inode->i_size))
+ return -EINVAL;
+ return inode_setattr(inode, attr);
+}
+
+
+static int
+spufs_new_file(struct super_block *sb, struct dentry *dentry,
+ struct file_operations *fops, int mode,
+ struct spu_context *ctx)
+{
+ static struct inode_operations spufs_file_iops = {
+ .setattr = spufs_setattr,
+ };
+ struct inode *inode;
+ int ret;
+
+ ret = -ENOSPC;
+ inode = spufs_new_inode(sb, S_IFREG | mode);
+ if (!inode)
+ goto out;
+
+ ret = 0;
+ inode->i_op = &spufs_file_iops;
+ inode->i_fop = fops;
+ inode->u.generic_ip = SPUFS_I(inode)->i_ctx = get_spu_context(ctx);
+ d_add(dentry, inode);
+out:
+ return ret;
+}
+
+static void
+spufs_delete_inode(struct inode *inode)
+{
+ if (SPUFS_I(inode)->i_ctx)
+ put_spu_context(SPUFS_I(inode)->i_ctx);
+ clear_inode(inode);
+}
+
+static void spufs_prune_dir(struct dentry *dir)
+{
+ struct dentry *dentry, *tmp;
+ down(&dir->d_inode->i_sem);
+ list_for_each_entry_safe(dentry, tmp, &dir->d_subdirs, d_child) {
+ spin_lock(&dcache_lock);
+ spin_lock(&dentry->d_lock);
+ if (!(d_unhashed(dentry)) && dentry->d_inode) {
+ dget_locked(dentry);
+ __d_drop(dentry);
+ spin_unlock(&dentry->d_lock);
+ simple_unlink(dir->d_inode, dentry);
+ spin_unlock(&dcache_lock);
+ dput(dentry);
+ } else {
+ spin_unlock(&dentry->d_lock);
+ spin_unlock(&dcache_lock);
+ }
+ }
+ shrink_dcache_parent(dir);
+ up(&dir->d_inode->i_sem);
+}
+
+static int spufs_rmdir(struct inode *root, struct dentry *dir_dentry)
+{
+ struct spu_context *ctx;
+
+ /* remove all entries */
+ down(&root->i_sem);
+ spufs_prune_dir(dir_dentry);
+ up(&root->i_sem);
+
+ /* We have to give up the mm_struct */
+ ctx = SPUFS_I(dir_dentry->d_inode)->i_ctx;
+ spu_forget(ctx);
+
+ /* XXX Do we need to hold i_sem here ? */
+ return simple_rmdir(root, dir_dentry);
+}
+
+static int spufs_fill_dir(struct dentry *dir, struct tree_descr *files,
+ int mode, struct spu_context *ctx)
+{
+ struct dentry *dentry;
+ int ret;
+
+ while (files->name && files->name[0]) {
+ ret = -ENOMEM;
+ dentry = d_alloc_name(dir, files->name);
+ if (!dentry)
+ goto out;
+ ret = spufs_new_file(dir->d_sb, dentry, files->ops,
+ files->mode & mode, ctx);
+ if (ret)
+ goto out;
+ files++;
+ }
+ return 0;
+out:
+ spufs_prune_dir(dir);
+ return ret;
+}
+
+static int spufs_dir_close(struct inode *inode, struct file *file)
+{
+ struct inode *dir;
+ struct dentry *dentry;
+ int ret;
+
+ dentry = file->f_dentry;
+ dir = dentry->d_parent->d_inode;
+
+ ret = spufs_rmdir(dir, dentry);
+ WARN_ON(ret);
+
+ return dcache_dir_close(inode, file);
+}
+
+struct inode_operations spufs_dir_inode_operations = {
+ .lookup = simple_lookup,
+};
+
+struct file_operations spufs_context_fops = {
+ .open = dcache_dir_open,
+ .release = spufs_dir_close,
+ .llseek = dcache_dir_lseek,
+ .read = generic_read_dir,
+ .readdir = dcache_readdir,
+ .fsync = simple_sync_file,
+};
+
+static int
+spufs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
+{
+ int ret;
+ struct inode *inode;
+ struct spu_context *ctx;
+
+ ret = -ENOSPC;
+ inode = spufs_new_inode(dir->i_sb, mode | S_IFDIR);
+ if (!inode)
+ goto out;
+
+ if (dir->i_mode & S_ISGID) {
+ inode->i_gid = dir->i_gid;
+ inode->i_mode &= S_ISGID;
+ }
+ ctx = alloc_spu_context(inode->i_mapping);
+ SPUFS_I(inode)->i_ctx = ctx;
+ if (!ctx)
+ goto out_iput;
+
+ inode->i_op = &spufs_dir_inode_operations;
+ inode->i_fop = &simple_dir_operations;
+ ret = spufs_fill_dir(dentry, spufs_dir_contents, mode, ctx);
+ if (ret)
+ goto out_free_ctx;
+
+ d_instantiate(dentry, inode);
+ dget(dentry);
+ dir->i_nlink++;
+ dentry->d_inode->i_nlink++;
+ goto out;
+
+out_free_ctx:
+ put_spu_context(ctx);
+out_iput:
+ iput(inode);
+out:
+ return ret;
+}
+
+static int spufs_context_open(struct dentry *dentry, struct vfsmount *mnt)
+{
+ int ret;
+ struct file *filp;
+
+ ret = get_unused_fd();
+ if (ret < 0) {
+ dput(dentry);
+ mntput(mnt);
+ goto out;
+ }
+
+ filp = dentry_open(dentry, mnt, O_RDONLY);
+ if (IS_ERR(filp)) {
+ put_unused_fd(ret);
+ ret = PTR_ERR(filp);
+ goto out;
+ }
+
+ filp->f_op = &spufs_context_fops;
+ fd_install(ret, filp);
+out:
+ return ret;
+}
+
+static struct file_system_type spufs_type;
+
+long spufs_create_thread(struct nameidata *nd,
+ unsigned int flags, mode_t mode)
+{
+ struct dentry *dentry;
+ int ret;
+
+ /* need to be at the root of spufs */
+ ret = -EINVAL;
+ if (nd->dentry->d_sb->s_type != &spufs_type ||
+ nd->dentry != nd->dentry->d_sb->s_root)
+ goto out;
+
+ dentry = lookup_create(nd, 1);
+ ret = PTR_ERR(dentry);
+ if (IS_ERR(dentry))
+ goto out_dir;
+
+ ret = -EEXIST;
+ if (dentry->d_inode)
+ goto out_dput;
+
+ mode &= ~current->fs->umask;
+ ret = spufs_mkdir(nd->dentry->d_inode, dentry, mode & S_IRWXUGO);
+ if (ret)
+ goto out_dput;
+
+ /*
+ * get references for dget and mntget, will be released
+ * in error path of *_open().
+ */
+ ret = spufs_context_open(dget(dentry), mntget(nd->mnt));
+ if (ret < 0)
+ spufs_rmdir(nd->dentry->d_inode, dentry);
+
+out_dput:
+ dput(dentry);
+out_dir:
+ up(&nd->dentry->d_inode->i_sem);
+out:
+ return ret;
+}
+
+/* File system initialization */
+enum {
+ Opt_uid, Opt_gid, Opt_err,
+};
+
+static match_table_t spufs_tokens = {
+ { Opt_uid, "uid=%d" },
+ { Opt_gid, "gid=%d" },
+ { Opt_err, NULL },
+};
+
+static int
+spufs_parse_options(char *options, struct inode *root)
+{
+ char *p;
+ substring_t args[MAX_OPT_ARGS];
+
+ while ((p = strsep(&options, ",")) != NULL) {
+ int token, option;
+
+ if (!*p)
+ continue;
+
+ token = match_token(p, spufs_tokens, args);
+ switch (token) {
+ case Opt_uid:
+ if (match_int(&args[0], &option))
+ return 0;
+ root->i_uid = option;
+ break;
+ case Opt_gid:
+ if (match_int(&args[0], &option))
+ return 0;
+ root->i_gid = option;
+ break;
+ default:
+ return 0;
+ }
+ }
+ return 1;
+}
+
+static int
+spufs_create_root(struct super_block *sb, void *data)
+{
+ struct inode *inode;
+ int ret;
+
+ ret = -ENOMEM;
+ inode = spufs_new_inode(sb, S_IFDIR | 0775);
+ if (!inode)
+ goto out;
+
+ inode->i_op = &spufs_dir_inode_operations;
+ inode->i_fop = &simple_dir_operations;
+ SPUFS_I(inode)->i_ctx = NULL;
+
+ ret = -EINVAL;
+ if (!spufs_parse_options(data, inode))
+ goto out_iput;
+
+ ret = -ENOMEM;
+ sb->s_root = d_alloc_root(inode);
+ if (!sb->s_root)
+ goto out_iput;
+
+ return 0;
+out_iput:
+ iput(inode);
+out:
+ return ret;
+}
+
+static int
+spufs_fill_super(struct super_block *sb, void *data, int silent)
+{
+ static struct super_operations s_ops = {
+ .alloc_inode = spufs_alloc_inode,
+ .destroy_inode = spufs_destroy_inode,
+ .statfs = simple_statfs,
+ .delete_inode = spufs_delete_inode,
+ .drop_inode = generic_delete_inode,
+ };
+
+ sb->s_maxbytes = MAX_LFS_FILESIZE;
+ sb->s_blocksize = PAGE_CACHE_SIZE;
+ sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
+ sb->s_magic = SPUFS_MAGIC;
+ sb->s_op = &s_ops;
+
+ return spufs_create_root(sb, data);
+}
+
+static struct super_block *
+spufs_get_sb(struct file_system_type *fstype, int flags,
+ const char *name, void *data)
+{
+ return get_sb_single(fstype, flags, data, spufs_fill_super);
+}
+
+static struct file_system_type spufs_type = {
+ .owner = THIS_MODULE,
+ .name = "spufs",
+ .get_sb = spufs_get_sb,
+ .kill_sb = kill_litter_super,
+};
+
+static int spufs_init(void)
+{
+ int ret;
+ ret = -ENOMEM;
+ spufs_inode_cache = kmem_cache_create("spufs_inode_cache",
+ sizeof(struct spufs_inode_info), 0,
+ SLAB_HWCACHE_ALIGN, spufs_init_once, NULL);
+
+ if (!spufs_inode_cache)
+ goto out;
+ if (spu_sched_init() != 0) {
+ kmem_cache_destroy(spufs_inode_cache);
+ goto out;
+ }
+ ret = register_filesystem(&spufs_type);
+ if (ret)
+ goto out_cache;
+ ret = register_spu_syscalls(&spufs_calls);
+ if (ret)
+ goto out_fs;
+ return 0;
+out_fs:
+ unregister_filesystem(&spufs_type);
+out_cache:
+ kmem_cache_destroy(spufs_inode_cache);
+out:
+ return ret;
+}
+module_init(spufs_init);
+
+static void spufs_exit(void)
+{
+ spu_sched_exit();
+ unregister_spu_syscalls(&spufs_calls);
+ unregister_filesystem(&spufs_type);
+ kmem_cache_destroy(spufs_inode_cache);
+}
+module_exit(spufs_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Arnd Bergmann <arndb@de.ibm.com>");
+
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
new file mode 100644
index 000000000000..18ea8866c61a
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -0,0 +1,131 @@
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+
+#include <asm/spu.h>
+
+#include "spufs.h"
+
+/* interrupt-level stop callback function. */
+void spufs_stop_callback(struct spu *spu)
+{
+ struct spu_context *ctx = spu->ctx;
+
+ wake_up_all(&ctx->stop_wq);
+}
+
+static inline int spu_stopped(struct spu_context *ctx, u32 * stat)
+{
+ struct spu *spu;
+ u64 pte_fault;
+
+ *stat = ctx->ops->status_read(ctx);
+ if (ctx->state != SPU_STATE_RUNNABLE)
+ return 1;
+ spu = ctx->spu;
+ pte_fault = spu->dsisr &
+ (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED);
+ return (!(*stat & 0x1) || pte_fault || spu->class_0_pending) ? 1 : 0;
+}
+
+static inline int spu_run_init(struct spu_context *ctx, u32 * npc,
+ u32 * status)
+{
+ int ret;
+
+ if ((ret = spu_acquire_runnable(ctx)) != 0)
+ return ret;
+ ctx->ops->npc_write(ctx, *npc);
+ ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE);
+ return 0;
+}
+
+static inline int spu_run_fini(struct spu_context *ctx, u32 * npc,
+ u32 * status)
+{
+ int ret = 0;
+
+ *status = ctx->ops->status_read(ctx);
+ *npc = ctx->ops->npc_read(ctx);
+ spu_release(ctx);
+
+ if (signal_pending(current))
+ ret = -ERESTARTSYS;
+ if (unlikely(current->ptrace & PT_PTRACED)) {
+ if ((*status & SPU_STATUS_STOPPED_BY_STOP)
+ && (*status >> SPU_STOP_STATUS_SHIFT) == 0x3fff) {
+ force_sig(SIGTRAP, current);
+ ret = -ERESTARTSYS;
+ }
+ }
+ return ret;
+}
+
+static inline int spu_reacquire_runnable(struct spu_context *ctx, u32 *npc,
+ u32 *status)
+{
+ int ret;
+
+ if ((ret = spu_run_fini(ctx, npc, status)) != 0)
+ return ret;
+ if (*status & (SPU_STATUS_STOPPED_BY_STOP |
+ SPU_STATUS_STOPPED_BY_HALT)) {
+ return *status;
+ }
+ if ((ret = spu_run_init(ctx, npc, status)) != 0)
+ return ret;
+ return 0;
+}
+
+static inline int spu_process_events(struct spu_context *ctx)
+{
+ struct spu *spu = ctx->spu;
+ u64 pte_fault = MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED;
+ int ret = 0;
+
+ if (spu->dsisr & pte_fault)
+ ret = spu_irq_class_1_bottom(spu);
+ if (spu->class_0_pending)
+ ret = spu_irq_class_0_bottom(spu);
+ if (!ret && signal_pending(current))
+ ret = -ERESTARTSYS;
+ return ret;
+}
+
+long spufs_run_spu(struct file *file, struct spu_context *ctx,
+ u32 * npc, u32 * status)
+{
+ int ret;
+
+ if (down_interruptible(&ctx->run_sema))
+ return -ERESTARTSYS;
+
+ ret = spu_run_init(ctx, npc, status);
+ if (ret)
+ goto out;
+
+ do {
+ ret = spufs_wait(ctx->stop_wq, spu_stopped(ctx, status));
+ if (unlikely(ret))
+ break;
+ if (unlikely(ctx->state != SPU_STATE_RUNNABLE)) {
+ ret = spu_reacquire_runnable(ctx, npc, status);
+ if (ret)
+ goto out;
+ continue;
+ }
+ ret = spu_process_events(ctx);
+
+ } while (!ret && !(*status & (SPU_STATUS_STOPPED_BY_STOP |
+ SPU_STATUS_STOPPED_BY_HALT)));
+
+ ctx->ops->runcntl_stop(ctx);
+ ret = spu_run_fini(ctx, npc, status);
+ if (!ret)
+ ret = *status;
+ spu_yield(ctx);
+
+out:
+ up(&ctx->run_sema);
+ return ret;
+}
+
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
new file mode 100644
index 000000000000..963182fbd1aa
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -0,0 +1,461 @@
+/* sched.c - SPU scheduler.
+ *
+ * Copyright (C) IBM 2005
+ * Author: Mark Nutter <mnutter@us.ibm.com>
+ *
+ * SPU scheduler, based on Linux thread priority. For now use
+ * a simple "cooperative" yield model with no preemption. SPU
+ * scheduling will eventually be preemptive: When a thread with
+ * a higher static priority gets ready to run, then an active SPU
+ * context will be preempted and returned to the waitq.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#undef DEBUG
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/completion.h>
+#include <linux/vmalloc.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/spu.h>
+#include <asm/spu_csa.h>
+#include "spufs.h"
+
+#define SPU_MIN_TIMESLICE (100 * HZ / 1000)
+
+#define SPU_BITMAP_SIZE (((MAX_PRIO+BITS_PER_LONG)/BITS_PER_LONG)+1)
+struct spu_prio_array {
+ atomic_t nr_blocked;
+ unsigned long bitmap[SPU_BITMAP_SIZE];
+ wait_queue_head_t waitq[MAX_PRIO];
+};
+
+/* spu_runqueue - This is the main runqueue data structure for SPUs. */
+struct spu_runqueue {
+ struct semaphore sem;
+ unsigned long nr_active;
+ unsigned long nr_idle;
+ unsigned long nr_switches;
+ struct list_head active_list;
+ struct list_head idle_list;
+ struct spu_prio_array prio;
+};
+
+static struct spu_runqueue *spu_runqueues = NULL;
+
+static inline struct spu_runqueue *spu_rq(void)
+{
+ /* Future: make this a per-NODE array,
+ * and use cpu_to_node(smp_processor_id())
+ */
+ return spu_runqueues;
+}
+
+static inline struct spu *del_idle(struct spu_runqueue *rq)
+{
+ struct spu *spu;
+
+ BUG_ON(rq->nr_idle <= 0);
+ BUG_ON(list_empty(&rq->idle_list));
+ /* Future: Move SPU out of low-power SRI state. */
+ spu = list_entry(rq->idle_list.next, struct spu, sched_list);
+ list_del_init(&spu->sched_list);
+ rq->nr_idle--;
+ return spu;
+}
+
+static inline void del_active(struct spu_runqueue *rq, struct spu *spu)
+{
+ BUG_ON(rq->nr_active <= 0);
+ BUG_ON(list_empty(&rq->active_list));
+ list_del_init(&spu->sched_list);
+ rq->nr_active--;
+}
+
+static inline void add_idle(struct spu_runqueue *rq, struct spu *spu)
+{
+ /* Future: Put SPU into low-power SRI state. */
+ list_add_tail(&spu->sched_list, &rq->idle_list);
+ rq->nr_idle++;
+}
+
+static inline void add_active(struct spu_runqueue *rq, struct spu *spu)
+{
+ rq->nr_active++;
+ rq->nr_switches++;
+ list_add_tail(&spu->sched_list, &rq->active_list);
+}
+
+static void prio_wakeup(struct spu_runqueue *rq)
+{
+ if (atomic_read(&rq->prio.nr_blocked) && rq->nr_idle) {
+ int best = sched_find_first_bit(rq->prio.bitmap);
+ if (best < MAX_PRIO) {
+ wait_queue_head_t *wq = &rq->prio.waitq[best];
+ wake_up_interruptible_nr(wq, 1);
+ }
+ }
+}
+
+static void prio_wait(struct spu_runqueue *rq, struct spu_context *ctx,
+ u64 flags)
+{
+ int prio = current->prio;
+ wait_queue_head_t *wq = &rq->prio.waitq[prio];
+ DEFINE_WAIT(wait);
+
+ __set_bit(prio, rq->prio.bitmap);
+ atomic_inc(&rq->prio.nr_blocked);
+ prepare_to_wait_exclusive(wq, &wait, TASK_INTERRUPTIBLE);
+ if (!signal_pending(current)) {
+ up(&rq->sem);
+ up_write(&ctx->state_sema);
+ pr_debug("%s: pid=%d prio=%d\n", __FUNCTION__,
+ current->pid, current->prio);
+ schedule();
+ down_write(&ctx->state_sema);
+ down(&rq->sem);
+ }
+ finish_wait(wq, &wait);
+ atomic_dec(&rq->prio.nr_blocked);
+ if (!waitqueue_active(wq))
+ __clear_bit(prio, rq->prio.bitmap);
+}
+
+static inline int is_best_prio(struct spu_runqueue *rq)
+{
+ int best_prio;
+
+ best_prio = sched_find_first_bit(rq->prio.bitmap);
+ return (current->prio < best_prio) ? 1 : 0;
+}
+
+static inline void mm_needs_global_tlbie(struct mm_struct *mm)
+{
+ /* Global TLBIE broadcast required with SPEs. */
+#if (NR_CPUS > 1)
+ __cpus_setall(&mm->cpu_vm_mask, NR_CPUS);
+#else
+ __cpus_setall(&mm->cpu_vm_mask, NR_CPUS+1); /* is this ok? */
+#endif
+}
+
+static inline void bind_context(struct spu *spu, struct spu_context *ctx)
+{
+ pr_debug("%s: pid=%d SPU=%d\n", __FUNCTION__, current->pid,
+ spu->number);
+ spu->ctx = ctx;
+ spu->flags = 0;
+ ctx->flags = 0;
+ ctx->spu = spu;
+ ctx->ops = &spu_hw_ops;
+ spu->pid = current->pid;
+ spu->prio = current->prio;
+ spu->mm = ctx->owner;
+ mm_needs_global_tlbie(spu->mm);
+ spu->ibox_callback = spufs_ibox_callback;
+ spu->wbox_callback = spufs_wbox_callback;
+ spu->stop_callback = spufs_stop_callback;
+ mb();
+ spu_unmap_mappings(ctx);
+ spu_restore(&ctx->csa, spu);
+ spu->timestamp = jiffies;
+}
+
+static inline void unbind_context(struct spu *spu, struct spu_context *ctx)
+{
+ pr_debug("%s: unbind pid=%d SPU=%d\n", __FUNCTION__,
+ spu->pid, spu->number);
+ spu_unmap_mappings(ctx);
+ spu_save(&ctx->csa, spu);
+ spu->timestamp = jiffies;
+ ctx->state = SPU_STATE_SAVED;
+ spu->ibox_callback = NULL;
+ spu->wbox_callback = NULL;
+ spu->stop_callback = NULL;
+ spu->mm = NULL;
+ spu->pid = 0;
+ spu->prio = MAX_PRIO;
+ ctx->ops = &spu_backing_ops;
+ ctx->spu = NULL;
+ ctx->flags = 0;
+ spu->flags = 0;
+ spu->ctx = NULL;
+}
+
+static void spu_reaper(void *data)
+{
+ struct spu_context *ctx = data;
+ struct spu *spu;
+
+ down_write(&ctx->state_sema);
+ spu = ctx->spu;
+ if (spu && test_bit(SPU_CONTEXT_PREEMPT, &ctx->flags)) {
+ if (atomic_read(&spu->rq->prio.nr_blocked)) {
+ pr_debug("%s: spu=%d\n", __func__, spu->number);
+ ctx->ops->runcntl_stop(ctx);
+ spu_deactivate(ctx);
+ wake_up_all(&ctx->stop_wq);
+ } else {
+ clear_bit(SPU_CONTEXT_PREEMPT, &ctx->flags);
+ }
+ }
+ up_write(&ctx->state_sema);
+ put_spu_context(ctx);
+}
+
+static void schedule_spu_reaper(struct spu_runqueue *rq, struct spu *spu)
+{
+ struct spu_context *ctx = get_spu_context(spu->ctx);
+ unsigned long now = jiffies;
+ unsigned long expire = spu->timestamp + SPU_MIN_TIMESLICE;
+
+ set_bit(SPU_CONTEXT_PREEMPT, &ctx->flags);
+ INIT_WORK(&ctx->reap_work, spu_reaper, ctx);
+ if (time_after(now, expire))
+ schedule_work(&ctx->reap_work);
+ else
+ schedule_delayed_work(&ctx->reap_work, expire - now);
+}
+
+static void check_preempt_active(struct spu_runqueue *rq)
+{
+ struct list_head *p;
+ struct spu *worst = NULL;
+
+ list_for_each(p, &rq->active_list) {
+ struct spu *spu = list_entry(p, struct spu, sched_list);
+ struct spu_context *ctx = spu->ctx;
+ if (!test_bit(SPU_CONTEXT_PREEMPT, &ctx->flags)) {
+ if (!worst || (spu->prio > worst->prio)) {
+ worst = spu;
+ }
+ }
+ }
+ if (worst && (current->prio < worst->prio))
+ schedule_spu_reaper(rq, worst);
+}
+
+static struct spu *get_idle_spu(struct spu_context *ctx, u64 flags)
+{
+ struct spu_runqueue *rq;
+ struct spu *spu = NULL;
+
+ rq = spu_rq();
+ down(&rq->sem);
+ for (;;) {
+ if (rq->nr_idle > 0) {
+ if (is_best_prio(rq)) {
+ /* Fall through. */
+ spu = del_idle(rq);
+ break;
+ } else {
+ prio_wakeup(rq);
+ up(&rq->sem);
+ yield();
+ if (signal_pending(current)) {
+ return NULL;
+ }
+ rq = spu_rq();
+ down(&rq->sem);
+ continue;
+ }
+ } else {
+ check_preempt_active(rq);
+ prio_wait(rq, ctx, flags);
+ if (signal_pending(current)) {
+ prio_wakeup(rq);
+ spu = NULL;
+ break;
+ }
+ continue;
+ }
+ }
+ up(&rq->sem);
+ return spu;
+}
+
+static void put_idle_spu(struct spu *spu)
+{
+ struct spu_runqueue *rq = spu->rq;
+
+ down(&rq->sem);
+ add_idle(rq, spu);
+ prio_wakeup(rq);
+ up(&rq->sem);
+}
+
+static int get_active_spu(struct spu *spu)
+{
+ struct spu_runqueue *rq = spu->rq;
+ struct list_head *p;
+ struct spu *tmp;
+ int rc = 0;
+
+ down(&rq->sem);
+ list_for_each(p, &rq->active_list) {
+ tmp = list_entry(p, struct spu, sched_list);
+ if (tmp == spu) {
+ del_active(rq, spu);
+ rc = 1;
+ break;
+ }
+ }
+ up(&rq->sem);
+ return rc;
+}
+
+static void put_active_spu(struct spu *spu)
+{
+ struct spu_runqueue *rq = spu->rq;
+
+ down(&rq->sem);
+ add_active(rq, spu);
+ up(&rq->sem);
+}
+
+/* Lock order:
+ * spu_activate() & spu_deactivate() require the
+ * caller to have down_write(&ctx->state_sema).
+ *
+ * The rq->sem is breifly held (inside or outside a
+ * given ctx lock) for list management, but is never
+ * held during save/restore.
+ */
+
+int spu_activate(struct spu_context *ctx, u64 flags)
+{
+ struct spu *spu;
+
+ if (ctx->spu)
+ return 0;
+ spu = get_idle_spu(ctx, flags);
+ if (!spu)
+ return (signal_pending(current)) ? -ERESTARTSYS : -EAGAIN;
+ bind_context(spu, ctx);
+ /*
+ * We're likely to wait for interrupts on the same
+ * CPU that we are now on, so send them here.
+ */
+ spu_irq_setaffinity(spu, raw_smp_processor_id());
+ put_active_spu(spu);
+ return 0;
+}
+
+void spu_deactivate(struct spu_context *ctx)
+{
+ struct spu *spu;
+ int needs_idle;
+
+ spu = ctx->spu;
+ if (!spu)
+ return;
+ needs_idle = get_active_spu(spu);
+ unbind_context(spu, ctx);
+ if (needs_idle)
+ put_idle_spu(spu);
+}
+
+void spu_yield(struct spu_context *ctx)
+{
+ struct spu *spu;
+ int need_yield = 0;
+
+ down_write(&ctx->state_sema);
+ spu = ctx->spu;
+ if (spu && (sched_find_first_bit(spu->rq->prio.bitmap) < MAX_PRIO)) {
+ pr_debug("%s: yielding SPU %d\n", __FUNCTION__, spu->number);
+ spu_deactivate(ctx);
+ ctx->state = SPU_STATE_SAVED;
+ need_yield = 1;
+ } else if (spu) {
+ spu->prio = MAX_PRIO;
+ }
+ up_write(&ctx->state_sema);
+ if (unlikely(need_yield))
+ yield();
+}
+
+int __init spu_sched_init(void)
+{
+ struct spu_runqueue *rq;
+ struct spu *spu;
+ int i;
+
+ rq = spu_runqueues = kmalloc(sizeof(struct spu_runqueue), GFP_KERNEL);
+ if (!rq) {
+ printk(KERN_WARNING "%s: Unable to allocate runqueues.\n",
+ __FUNCTION__);
+ return 1;
+ }
+ memset(rq, 0, sizeof(struct spu_runqueue));
+ init_MUTEX(&rq->sem);
+ INIT_LIST_HEAD(&rq->active_list);
+ INIT_LIST_HEAD(&rq->idle_list);
+ rq->nr_active = 0;
+ rq->nr_idle = 0;
+ rq->nr_switches = 0;
+ atomic_set(&rq->prio.nr_blocked, 0);
+ for (i = 0; i < MAX_PRIO; i++) {
+ init_waitqueue_head(&rq->prio.waitq[i]);
+ __clear_bit(i, rq->prio.bitmap);
+ }
+ __set_bit(MAX_PRIO, rq->prio.bitmap);
+ for (;;) {
+ spu = spu_alloc();
+ if (!spu)
+ break;
+ pr_debug("%s: adding SPU[%d]\n", __FUNCTION__, spu->number);
+ add_idle(rq, spu);
+ spu->rq = rq;
+ spu->timestamp = jiffies;
+ }
+ if (!rq->nr_idle) {
+ printk(KERN_WARNING "%s: No available SPUs.\n", __FUNCTION__);
+ kfree(rq);
+ return 1;
+ }
+ return 0;
+}
+
+void __exit spu_sched_exit(void)
+{
+ struct spu_runqueue *rq = spu_rq();
+ struct spu *spu;
+
+ if (!rq) {
+ printk(KERN_WARNING "%s: no runqueues!\n", __FUNCTION__);
+ return;
+ }
+ while (rq->nr_idle > 0) {
+ spu = del_idle(rq);
+ if (!spu)
+ break;
+ spu_free(spu);
+ }
+ kfree(rq);
+}
diff --git a/arch/powerpc/platforms/cell/spufs/spu_restore.c b/arch/powerpc/platforms/cell/spufs/spu_restore.c
new file mode 100644
index 000000000000..0bf723dcd677
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spufs/spu_restore.c
@@ -0,0 +1,336 @@
+/*
+ * spu_restore.c
+ *
+ * (C) Copyright IBM Corp. 2005
+ *
+ * SPU-side context restore sequence outlined in
+ * Synergistic Processor Element Book IV
+ *
+ * Author: Mark Nutter <mnutter@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+
+#ifndef LS_SIZE
+#define LS_SIZE 0x40000 /* 256K (in bytes) */
+#endif
+
+typedef unsigned int u32;
+typedef unsigned long long u64;
+
+#include <spu_intrinsics.h>
+#include <asm/spu_csa.h>
+#include "spu_utils.h"
+
+#define BR_INSTR 0x327fff80 /* br -4 */
+#define NOP_INSTR 0x40200000 /* nop */
+#define HEQ_INSTR 0x7b000000 /* heq $0, $0 */
+#define STOP_INSTR 0x00000000 /* stop 0x0 */
+#define ILLEGAL_INSTR 0x00800000 /* illegal instr */
+#define RESTORE_COMPLETE 0x00003ffc /* stop 0x3ffc */
+
+static inline void fetch_regs_from_mem(addr64 lscsa_ea)
+{
+ unsigned int ls = (unsigned int)&regs_spill[0];
+ unsigned int size = sizeof(regs_spill);
+ unsigned int tag_id = 0;
+ unsigned int cmd = 0x40; /* GET */
+
+ spu_writech(MFC_LSA, ls);
+ spu_writech(MFC_EAH, lscsa_ea.ui[0]);
+ spu_writech(MFC_EAL, lscsa_ea.ui[1]);
+ spu_writech(MFC_Size, size);
+ spu_writech(MFC_TagID, tag_id);
+ spu_writech(MFC_Cmd, cmd);
+}
+
+static inline void restore_upper_240kb(addr64 lscsa_ea)
+{
+ unsigned int ls = 16384;
+ unsigned int list = (unsigned int)&dma_list[0];
+ unsigned int size = sizeof(dma_list);
+ unsigned int tag_id = 0;
+ unsigned int cmd = 0x44; /* GETL */
+
+ /* Restore, Step 4:
+ * Enqueue the GETL command (tag 0) to the MFC SPU command
+ * queue to transfer the upper 240 kb of LS from CSA.
+ */
+ spu_writech(MFC_LSA, ls);
+ spu_writech(MFC_EAH, lscsa_ea.ui[0]);
+ spu_writech(MFC_EAL, list);
+ spu_writech(MFC_Size, size);
+ spu_writech(MFC_TagID, tag_id);
+ spu_writech(MFC_Cmd, cmd);
+}
+
+static inline void restore_decr(void)
+{
+ unsigned int offset;
+ unsigned int decr_running;
+ unsigned int decr;
+
+ /* Restore, Step 6:
+ * If the LSCSA "decrementer running" flag is set
+ * then write the SPU_WrDec channel with the
+ * decrementer value from LSCSA.
+ */
+ offset = LSCSA_QW_OFFSET(decr_status);
+ decr_running = regs_spill[offset].slot[0];
+ if (decr_running) {
+ offset = LSCSA_QW_OFFSET(decr);
+ decr = regs_spill[offset].slot[0];
+ spu_writech(SPU_WrDec, decr);
+ }
+}
+
+static inline void write_ppu_mb(void)
+{
+ unsigned int offset;
+ unsigned int data;
+
+ /* Restore, Step 11:
+ * Write the MFC_WrOut_MB channel with the PPU_MB
+ * data from LSCSA.
+ */
+ offset = LSCSA_QW_OFFSET(ppu_mb);
+ data = regs_spill[offset].slot[0];
+ spu_writech(SPU_WrOutMbox, data);
+}
+
+static inline void write_ppuint_mb(void)
+{
+ unsigned int offset;
+ unsigned int data;
+
+ /* Restore, Step 12:
+ * Write the MFC_WrInt_MB channel with the PPUINT_MB
+ * data from LSCSA.
+ */
+ offset = LSCSA_QW_OFFSET(ppuint_mb);
+ data = regs_spill[offset].slot[0];
+ spu_writech(SPU_WrOutIntrMbox, data);
+}
+
+static inline void restore_fpcr(void)
+{
+ unsigned int offset;
+ vector unsigned int fpcr;
+
+ /* Restore, Step 13:
+ * Restore the floating-point status and control
+ * register from the LSCSA.
+ */
+ offset = LSCSA_QW_OFFSET(fpcr);
+ fpcr = regs_spill[offset].v;
+ spu_mtfpscr(fpcr);
+}
+
+static inline void restore_srr0(void)
+{
+ unsigned int offset;
+ unsigned int srr0;
+
+ /* Restore, Step 14:
+ * Restore the SPU SRR0 data from the LSCSA.
+ */
+ offset = LSCSA_QW_OFFSET(srr0);
+ srr0 = regs_spill[offset].slot[0];
+ spu_writech(SPU_WrSRR0, srr0);
+}
+
+static inline void restore_event_mask(void)
+{
+ unsigned int offset;
+ unsigned int event_mask;
+
+ /* Restore, Step 15:
+ * Restore the SPU_RdEventMsk data from the LSCSA.
+ */
+ offset = LSCSA_QW_OFFSET(event_mask);
+ event_mask = regs_spill[offset].slot[0];
+ spu_writech(SPU_WrEventMask, event_mask);
+}
+
+static inline void restore_tag_mask(void)
+{
+ unsigned int offset;
+ unsigned int tag_mask;
+
+ /* Restore, Step 16:
+ * Restore the SPU_RdTagMsk data from the LSCSA.
+ */
+ offset = LSCSA_QW_OFFSET(tag_mask);
+ tag_mask = regs_spill[offset].slot[0];
+ spu_writech(MFC_WrTagMask, tag_mask);
+}
+
+static inline void restore_complete(void)
+{
+ extern void exit_fini(void);
+ unsigned int *exit_instrs = (unsigned int *)exit_fini;
+ unsigned int offset;
+ unsigned int stopped_status;
+ unsigned int stopped_code;
+
+ /* Restore, Step 18:
+ * Issue a stop-and-signal instruction with
+ * "good context restore" signal value.
+ *
+ * Restore, Step 19:
+ * There may be additional instructions placed
+ * here by the PPE Sequence for SPU Context
+ * Restore in order to restore the correct
+ * "stopped state".
+ *
+ * This step is handled here by analyzing the
+ * LSCSA.stopped_status and then modifying the
+ * exit() function to behave appropriately.
+ */
+
+ offset = LSCSA_QW_OFFSET(stopped_status);
+ stopped_status = regs_spill[offset].slot[0];
+ stopped_code = regs_spill[offset].slot[1];
+
+ switch (stopped_status) {
+ case SPU_STOPPED_STATUS_P_I:
+ /* SPU_Status[P,I]=1. Add illegal instruction
+ * followed by stop-and-signal instruction after
+ * end of restore code.
+ */
+ exit_instrs[0] = RESTORE_COMPLETE;
+ exit_instrs[1] = ILLEGAL_INSTR;
+ exit_instrs[2] = STOP_INSTR | stopped_code;
+ break;
+ case SPU_STOPPED_STATUS_P_H:
+ /* SPU_Status[P,H]=1. Add 'heq $0, $0' followed
+ * by stop-and-signal instruction after end of
+ * restore code.
+ */
+ exit_instrs[0] = RESTORE_COMPLETE;
+ exit_instrs[1] = HEQ_INSTR;
+ exit_instrs[2] = STOP_INSTR | stopped_code;
+ break;
+ case SPU_STOPPED_STATUS_S_P:
+ /* SPU_Status[S,P]=1. Add nop instruction
+ * followed by 'br -4' after end of restore
+ * code.
+ */
+ exit_instrs[0] = RESTORE_COMPLETE;
+ exit_instrs[1] = STOP_INSTR | stopped_code;
+ exit_instrs[2] = NOP_INSTR;
+ exit_instrs[3] = BR_INSTR;
+ break;
+ case SPU_STOPPED_STATUS_S_I:
+ /* SPU_Status[S,I]=1. Add illegal instruction
+ * followed by 'br -4' after end of restore code.
+ */
+ exit_instrs[0] = RESTORE_COMPLETE;
+ exit_instrs[1] = ILLEGAL_INSTR;
+ exit_instrs[2] = NOP_INSTR;
+ exit_instrs[3] = BR_INSTR;
+ break;
+ case SPU_STOPPED_STATUS_I:
+ /* SPU_Status[I]=1. Add illegal instruction followed
+ * by infinite loop after end of restore sequence.
+ */
+ exit_instrs[0] = RESTORE_COMPLETE;
+ exit_instrs[1] = ILLEGAL_INSTR;
+ exit_instrs[2] = NOP_INSTR;
+ exit_instrs[3] = BR_INSTR;
+ break;
+ case SPU_STOPPED_STATUS_S:
+ /* SPU_Status[S]=1. Add two 'nop' instructions. */
+ exit_instrs[0] = RESTORE_COMPLETE;
+ exit_instrs[1] = NOP_INSTR;
+ exit_instrs[2] = NOP_INSTR;
+ exit_instrs[3] = BR_INSTR;
+ break;
+ case SPU_STOPPED_STATUS_H:
+ /* SPU_Status[H]=1. Add 'heq $0, $0' instruction
+ * after end of restore code.
+ */
+ exit_instrs[0] = RESTORE_COMPLETE;
+ exit_instrs[1] = HEQ_INSTR;
+ exit_instrs[2] = NOP_INSTR;
+ exit_instrs[3] = BR_INSTR;
+ break;
+ case SPU_STOPPED_STATUS_P:
+ /* SPU_Status[P]=1. Add stop-and-signal instruction
+ * after end of restore code.
+ */
+ exit_instrs[0] = RESTORE_COMPLETE;
+ exit_instrs[1] = STOP_INSTR | stopped_code;
+ break;
+ case SPU_STOPPED_STATUS_R:
+ /* SPU_Status[I,S,H,P,R]=0. Add infinite loop. */
+ exit_instrs[0] = RESTORE_COMPLETE;
+ exit_instrs[1] = NOP_INSTR;
+ exit_instrs[2] = NOP_INSTR;
+ exit_instrs[3] = BR_INSTR;
+ break;
+ default:
+ /* SPU_Status[R]=1. No additonal instructions. */
+ break;
+ }
+ spu_sync();
+}
+
+/**
+ * main - entry point for SPU-side context restore.
+ *
+ * This code deviates from the documented sequence in the
+ * following aspects:
+ *
+ * 1. The EA for LSCSA is passed from PPE in the
+ * signal notification channels.
+ * 2. The register spill area is pulled by SPU
+ * into LS, rather than pushed by PPE.
+ * 3. All 128 registers are restored by exit().
+ * 4. The exit() function is modified at run
+ * time in order to properly restore the
+ * SPU_Status register.
+ */
+int main()
+{
+ addr64 lscsa_ea;
+
+ lscsa_ea.ui[0] = spu_readch(SPU_RdSigNotify1);
+ lscsa_ea.ui[1] = spu_readch(SPU_RdSigNotify2);
+ fetch_regs_from_mem(lscsa_ea);
+
+ set_event_mask(); /* Step 1. */
+ set_tag_mask(); /* Step 2. */
+ build_dma_list(lscsa_ea); /* Step 3. */
+ restore_upper_240kb(lscsa_ea); /* Step 4. */
+ /* Step 5: done by 'exit'. */
+ restore_decr(); /* Step 6. */
+ enqueue_putllc(lscsa_ea); /* Step 7. */
+ set_tag_update(); /* Step 8. */
+ read_tag_status(); /* Step 9. */
+ read_llar_status(); /* Step 10. */
+ write_ppu_mb(); /* Step 11. */
+ write_ppuint_mb(); /* Step 12. */
+ restore_fpcr(); /* Step 13. */
+ restore_srr0(); /* Step 14. */
+ restore_event_mask(); /* Step 15. */
+ restore_tag_mask(); /* Step 16. */
+ /* Step 17. done by 'exit'. */
+ restore_complete(); /* Step 18. */
+
+ return 0;
+}
diff --git a/arch/powerpc/platforms/cell/spufs/spu_restore_crt0.S b/arch/powerpc/platforms/cell/spufs/spu_restore_crt0.S
new file mode 100644
index 000000000000..2905949debe1
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spufs/spu_restore_crt0.S
@@ -0,0 +1,116 @@
+/*
+ * crt0_r.S: Entry function for SPU-side context restore.
+ *
+ * Copyright (C) 2005 IBM
+ *
+ * Entry and exit function for SPU-side of the context restore
+ * sequence. Sets up an initial stack frame, then branches to
+ * 'main'. On return, restores all 128 registers from the LSCSA
+ * and exits.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <asm/spu_csa.h>
+
+.data
+.align 7
+.globl regs_spill
+regs_spill:
+.space SIZEOF_SPU_SPILL_REGS, 0x0
+
+.text
+.global _start
+_start:
+ /* Initialize the stack pointer to point to 16368
+ * (16kb-16). The back chain pointer is initialized
+ * to NULL.
+ */
+ il $0, 0
+ il $SP, 16368
+ stqd $0, 0($SP)
+
+ /* Allocate a minimum stack frame for the called main.
+ * This is needed so that main has a place to save the
+ * link register when it calls another function.
+ */
+ stqd $SP, -160($SP)
+ ai $SP, $SP, -160
+
+ /* Call the program's main function. */
+ brsl $0, main
+
+.global exit
+.global _exit
+exit:
+_exit:
+ /* SPU Context Restore, Step 5: Restore the remaining 112 GPRs. */
+ ila $3, regs_spill + 256
+restore_regs:
+ lqr $4, restore_reg_insts
+restore_reg_loop:
+ ai $4, $4, 4
+ .balignl 16, 0x40200000
+restore_reg_insts: /* must be quad-word aligned. */
+ lqd $16, 0($3)
+ lqd $17, 16($3)
+ lqd $18, 32($3)
+ lqd $19, 48($3)
+ andi $5, $4, 0x7F
+ stqr $4, restore_reg_insts
+ ai $3, $3, 64
+ brnz $5, restore_reg_loop
+
+ /* SPU Context Restore Step 17: Restore the first 16 GPRs. */
+ lqa $0, regs_spill + 0
+ lqa $1, regs_spill + 16
+ lqa $2, regs_spill + 32
+ lqa $3, regs_spill + 48
+ lqa $4, regs_spill + 64
+ lqa $5, regs_spill + 80
+ lqa $6, regs_spill + 96
+ lqa $7, regs_spill + 112
+ lqa $8, regs_spill + 128
+ lqa $9, regs_spill + 144
+ lqa $10, regs_spill + 160
+ lqa $11, regs_spill + 176
+ lqa $12, regs_spill + 192
+ lqa $13, regs_spill + 208
+ lqa $14, regs_spill + 224
+ lqa $15, regs_spill + 240
+
+ /* Under normal circumstances, the 'exit' function
+ * terminates with 'stop SPU_RESTORE_COMPLETE',
+ * indicating that the SPU-side restore code has
+ * completed.
+ *
+ * However it is possible that instructions immediately
+ * following the 'stop 0x3ffc' have been modified at run
+ * time so as to recreate the exact SPU_Status settings
+ * from the application, e.g. illegal instruciton, halt,
+ * etc.
+ */
+.global exit_fini
+.global _exit_fini
+exit_fini:
+_exit_fini:
+ stop SPU_RESTORE_COMPLETE
+ stop 0
+ stop 0
+ stop 0
+
+ /* Pad the size of this crt0.o to be multiple of 16 bytes. */
+.balignl 16, 0x0
diff --git a/arch/powerpc/platforms/cell/spufs/spu_restore_dump.h_shipped b/arch/powerpc/platforms/cell/spufs/spu_restore_dump.h_shipped
new file mode 100644
index 000000000000..1b2355ff7036
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spufs/spu_restore_dump.h_shipped
@@ -0,0 +1,231 @@
+/*
+ * spu_restore_dump.h: Copyright (C) 2005 IBM.
+ * Hex-dump auto generated from spu_restore.c.
+ * Do not edit!
+ */
+static unsigned int spu_restore_code[] __page_aligned = {
+0x40800000, 0x409ff801, 0x24000080, 0x24fd8081,
+0x1cd80081, 0x33001180, 0x42030003, 0x33800284,
+0x1c010204, 0x40200000, 0x40200000, 0x40200000,
+0x34000190, 0x34004191, 0x34008192, 0x3400c193,
+0x141fc205, 0x23fffd84, 0x1c100183, 0x217ffa85,
+0x3080a000, 0x3080a201, 0x3080a402, 0x3080a603,
+0x3080a804, 0x3080aa05, 0x3080ac06, 0x3080ae07,
+0x3080b008, 0x3080b209, 0x3080b40a, 0x3080b60b,
+0x3080b80c, 0x3080ba0d, 0x3080bc0e, 0x3080be0f,
+0x00003ffc, 0x00000000, 0x00000000, 0x00000000,
+0x01a00182, 0x3ec00083, 0xb0a14103, 0x01a00204,
+0x3ec10082, 0x4202800e, 0x04000703, 0xb0a14202,
+0x21a00803, 0x3fbf028d, 0x3f20068d, 0x3fbe0682,
+0x3fe30102, 0x21a00882, 0x3f82028f, 0x3fe3078f,
+0x3fbf0784, 0x3f200204, 0x3fbe0204, 0x3fe30204,
+0x04000203, 0x21a00903, 0x40848002, 0x21a00982,
+0x40800003, 0x21a00a03, 0x40802002, 0x21a00a82,
+0x21a00083, 0x40800082, 0x21a00b02, 0x10002818,
+0x40a80002, 0x32800007, 0x4207000c, 0x18008208,
+0x40a0000b, 0x4080020a, 0x40800709, 0x00200000,
+0x42070002, 0x3ac30384, 0x1cffc489, 0x00200000,
+0x18008383, 0x38830382, 0x4cffc486, 0x3ac28185,
+0xb0408584, 0x28830382, 0x1c020387, 0x38828182,
+0xb0408405, 0x1802c408, 0x28828182, 0x217ff886,
+0x04000583, 0x21a00803, 0x3fbe0682, 0x3fe30102,
+0x04000106, 0x21a00886, 0x04000603, 0x21a00903,
+0x40803c02, 0x21a00982, 0x40800003, 0x04000184,
+0x21a00a04, 0x40802202, 0x21a00a82, 0x42028005,
+0x34208702, 0x21002282, 0x21a00804, 0x21a00886,
+0x3fbf0782, 0x3f200102, 0x3fbe0102, 0x3fe30102,
+0x21a00902, 0x40804003, 0x21a00983, 0x21a00a04,
+0x40805a02, 0x21a00a82, 0x40800083, 0x21a00b83,
+0x01a00c02, 0x01a00d83, 0x3420c282, 0x21a00e02,
+0x34210283, 0x21a00f03, 0x34200284, 0x77400200,
+0x3421c282, 0x21a00702, 0x34218283, 0x21a00083,
+0x34214282, 0x21a00b02, 0x4200480c, 0x00200000,
+0x1c010286, 0x34220284, 0x34220302, 0x0f608203,
+0x5c024204, 0x3b81810b, 0x42013c02, 0x00200000,
+0x18008185, 0x38808183, 0x3b814182, 0x21004e84,
+0x4020007f, 0x35000100, 0x000004e0, 0x000002a0,
+0x000002e8, 0x00000428, 0x00000360, 0x000002e8,
+0x000004a0, 0x00000468, 0x000003c8, 0x00000360,
+0x409ffe02, 0x30801203, 0x40800204, 0x3ec40085,
+0x10009c09, 0x3ac10606, 0xb060c105, 0x4020007f,
+0x4020007f, 0x20801203, 0x38810602, 0xb0408586,
+0x28810602, 0x32004180, 0x34204702, 0x21a00382,
+0x4020007f, 0x327fdc80, 0x409ffe02, 0x30801203,
+0x40800204, 0x3ec40087, 0x40800405, 0x00200000,
+0x40800606, 0x3ac10608, 0x3ac14609, 0x3ac1860a,
+0xb060c107, 0x20801203, 0x41004003, 0x38810602,
+0x4020007f, 0xb0408188, 0x4020007f, 0x28810602,
+0x41201002, 0x38814603, 0x10009c09, 0xb060c109,
+0x4020007f, 0x28814603, 0x41193f83, 0x38818602,
+0x60ffc003, 0xb040818a, 0x28818602, 0x32003080,
+0x409ffe02, 0x30801203, 0x40800204, 0x3ec40087,
+0x41201008, 0x10009c14, 0x40800405, 0x3ac10609,
+0x40800606, 0x3ac1460a, 0xb060c107, 0x3ac1860b,
+0x20801203, 0x38810602, 0xb0408409, 0x28810602,
+0x38814603, 0xb060c40a, 0x4020007f, 0x28814603,
+0x41193f83, 0x38818602, 0x60ffc003, 0xb040818b,
+0x28818602, 0x32002380, 0x409ffe02, 0x30801204,
+0x40800205, 0x3ec40083, 0x40800406, 0x3ac14607,
+0x3ac18608, 0xb0810103, 0x41004002, 0x20801204,
+0x4020007f, 0x38814603, 0x10009c0b, 0xb060c107,
+0x4020007f, 0x4020007f, 0x28814603, 0x38818602,
+0x4020007f, 0x4020007f, 0xb0408588, 0x28818602,
+0x4020007f, 0x32001780, 0x409ffe02, 0x1000640e,
+0x40800204, 0x30801203, 0x40800405, 0x3ec40087,
+0x40800606, 0x3ac10608, 0x3ac14609, 0x3ac1860a,
+0xb060c107, 0x20801203, 0x413d8003, 0x38810602,
+0x4020007f, 0x327fd780, 0x409ffe02, 0x10007f0c,
+0x40800205, 0x30801204, 0x40800406, 0x3ec40083,
+0x3ac14607, 0x3ac18608, 0xb0810103, 0x413d8002,
+0x20801204, 0x38814603, 0x4020007f, 0x327feb80,
+0x409ffe02, 0x30801203, 0x40800204, 0x3ec40087,
+0x40800405, 0x1000650a, 0x40800606, 0x3ac10608,
+0x3ac14609, 0x3ac1860a, 0xb060c107, 0x20801203,
+0x38810602, 0xb0408588, 0x4020007f, 0x327fc980,
+0x00400000, 0x40800003, 0x4020007f, 0x35000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+};
diff --git a/arch/powerpc/platforms/cell/spufs/spu_save.c b/arch/powerpc/platforms/cell/spufs/spu_save.c
new file mode 100644
index 000000000000..196033b8a579
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spufs/spu_save.c
@@ -0,0 +1,195 @@
+/*
+ * spu_save.c
+ *
+ * (C) Copyright IBM Corp. 2005
+ *
+ * SPU-side context save sequence outlined in
+ * Synergistic Processor Element Book IV
+ *
+ * Author: Mark Nutter <mnutter@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+
+#ifndef LS_SIZE
+#define LS_SIZE 0x40000 /* 256K (in bytes) */
+#endif
+
+typedef unsigned int u32;
+typedef unsigned long long u64;
+
+#include <spu_intrinsics.h>
+#include <asm/spu_csa.h>
+#include "spu_utils.h"
+
+static inline void save_event_mask(void)
+{
+ unsigned int offset;
+
+ /* Save, Step 2:
+ * Read the SPU_RdEventMsk channel and save to the LSCSA.
+ */
+ offset = LSCSA_QW_OFFSET(event_mask);
+ regs_spill[offset].slot[0] = spu_readch(SPU_RdEventStatMask);
+}
+
+static inline void save_tag_mask(void)
+{
+ unsigned int offset;
+
+ /* Save, Step 3:
+ * Read the SPU_RdTagMsk channel and save to the LSCSA.
+ */
+ offset = LSCSA_QW_OFFSET(tag_mask);
+ regs_spill[offset].slot[0] = spu_readch(MFC_RdTagMask);
+}
+
+static inline void save_upper_240kb(addr64 lscsa_ea)
+{
+ unsigned int ls = 16384;
+ unsigned int list = (unsigned int)&dma_list[0];
+ unsigned int size = sizeof(dma_list);
+ unsigned int tag_id = 0;
+ unsigned int cmd = 0x24; /* PUTL */
+
+ /* Save, Step 7:
+ * Enqueue the PUTL command (tag 0) to the MFC SPU command
+ * queue to transfer the remaining 240 kb of LS to CSA.
+ */
+ spu_writech(MFC_LSA, ls);
+ spu_writech(MFC_EAH, lscsa_ea.ui[0]);
+ spu_writech(MFC_EAL, list);
+ spu_writech(MFC_Size, size);
+ spu_writech(MFC_TagID, tag_id);
+ spu_writech(MFC_Cmd, cmd);
+}
+
+static inline void save_fpcr(void)
+{
+ // vector unsigned int fpcr;
+ unsigned int offset;
+
+ /* Save, Step 9:
+ * Issue the floating-point status and control register
+ * read instruction, and save to the LSCSA.
+ */
+ offset = LSCSA_QW_OFFSET(fpcr);
+ regs_spill[offset].v = spu_mffpscr();
+}
+
+static inline void save_decr(void)
+{
+ unsigned int offset;
+
+ /* Save, Step 10:
+ * Read and save the SPU_RdDec channel data to
+ * the LSCSA.
+ */
+ offset = LSCSA_QW_OFFSET(decr);
+ regs_spill[offset].slot[0] = spu_readch(SPU_RdDec);
+}
+
+static inline void save_srr0(void)
+{
+ unsigned int offset;
+
+ /* Save, Step 11:
+ * Read and save the SPU_WSRR0 channel data to
+ * the LSCSA.
+ */
+ offset = LSCSA_QW_OFFSET(srr0);
+ regs_spill[offset].slot[0] = spu_readch(SPU_RdSRR0);
+}
+
+static inline void spill_regs_to_mem(addr64 lscsa_ea)
+{
+ unsigned int ls = (unsigned int)&regs_spill[0];
+ unsigned int size = sizeof(regs_spill);
+ unsigned int tag_id = 0;
+ unsigned int cmd = 0x20; /* PUT */
+
+ /* Save, Step 13:
+ * Enqueue a PUT command (tag 0) to send the LSCSA
+ * to the CSA.
+ */
+ spu_writech(MFC_LSA, ls);
+ spu_writech(MFC_EAH, lscsa_ea.ui[0]);
+ spu_writech(MFC_EAL, lscsa_ea.ui[1]);
+ spu_writech(MFC_Size, size);
+ spu_writech(MFC_TagID, tag_id);
+ spu_writech(MFC_Cmd, cmd);
+}
+
+static inline void enqueue_sync(addr64 lscsa_ea)
+{
+ unsigned int tag_id = 0;
+ unsigned int cmd = 0xCC;
+
+ /* Save, Step 14:
+ * Enqueue an MFC_SYNC command (tag 0).
+ */
+ spu_writech(MFC_TagID, tag_id);
+ spu_writech(MFC_Cmd, cmd);
+}
+
+static inline void save_complete(void)
+{
+ /* Save, Step 18:
+ * Issue a stop-and-signal instruction indicating
+ * "save complete". Note: This function will not
+ * return!!
+ */
+ spu_stop(SPU_SAVE_COMPLETE);
+}
+
+/**
+ * main - entry point for SPU-side context save.
+ *
+ * This code deviates from the documented sequence as follows:
+ *
+ * 1. The EA for LSCSA is passed from PPE in the
+ * signal notification channels.
+ * 2. All 128 registers are saved by crt0.o.
+ */
+int main()
+{
+ addr64 lscsa_ea;
+
+ lscsa_ea.ui[0] = spu_readch(SPU_RdSigNotify1);
+ lscsa_ea.ui[1] = spu_readch(SPU_RdSigNotify2);
+
+ /* Step 1: done by exit(). */
+ save_event_mask(); /* Step 2. */
+ save_tag_mask(); /* Step 3. */
+ set_event_mask(); /* Step 4. */
+ set_tag_mask(); /* Step 5. */
+ build_dma_list(lscsa_ea); /* Step 6. */
+ save_upper_240kb(lscsa_ea); /* Step 7. */
+ /* Step 8: done by exit(). */
+ save_fpcr(); /* Step 9. */
+ save_decr(); /* Step 10. */
+ save_srr0(); /* Step 11. */
+ enqueue_putllc(lscsa_ea); /* Step 12. */
+ spill_regs_to_mem(lscsa_ea); /* Step 13. */
+ enqueue_sync(lscsa_ea); /* Step 14. */
+ set_tag_update(); /* Step 15. */
+ read_tag_status(); /* Step 16. */
+ read_llar_status(); /* Step 17. */
+ save_complete(); /* Step 18. */
+
+ return 0;
+}
diff --git a/arch/powerpc/platforms/cell/spufs/spu_save_crt0.S b/arch/powerpc/platforms/cell/spufs/spu_save_crt0.S
new file mode 100644
index 000000000000..6659d6a66faa
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spufs/spu_save_crt0.S
@@ -0,0 +1,102 @@
+/*
+ * crt0_s.S: Entry function for SPU-side context save.
+ *
+ * Copyright (C) 2005 IBM
+ *
+ * Entry function for SPU-side of the context save sequence.
+ * Saves all 128 GPRs, sets up an initial stack frame, then
+ * branches to 'main'.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <asm/spu_csa.h>
+
+.data
+.align 7
+.globl regs_spill
+regs_spill:
+.space SIZEOF_SPU_SPILL_REGS, 0x0
+
+.text
+.global _start
+_start:
+ /* SPU Context Save Step 1: Save the first 16 GPRs. */
+ stqa $0, regs_spill + 0
+ stqa $1, regs_spill + 16
+ stqa $2, regs_spill + 32
+ stqa $3, regs_spill + 48
+ stqa $4, regs_spill + 64
+ stqa $5, regs_spill + 80
+ stqa $6, regs_spill + 96
+ stqa $7, regs_spill + 112
+ stqa $8, regs_spill + 128
+ stqa $9, regs_spill + 144
+ stqa $10, regs_spill + 160
+ stqa $11, regs_spill + 176
+ stqa $12, regs_spill + 192
+ stqa $13, regs_spill + 208
+ stqa $14, regs_spill + 224
+ stqa $15, regs_spill + 240
+
+ /* SPU Context Save, Step 8: Save the remaining 112 GPRs. */
+ ila $3, regs_spill + 256
+save_regs:
+ lqr $4, save_reg_insts
+save_reg_loop:
+ ai $4, $4, 4
+ .balignl 16, 0x40200000
+save_reg_insts: /* must be quad-word aligned. */
+ stqd $16, 0($3)
+ stqd $17, 16($3)
+ stqd $18, 32($3)
+ stqd $19, 48($3)
+ andi $5, $4, 0x7F
+ stqr $4, save_reg_insts
+ ai $3, $3, 64
+ brnz $5, save_reg_loop
+
+ /* Initialize the stack pointer to point to 16368
+ * (16kb-16). The back chain pointer is initialized
+ * to NULL.
+ */
+ il $0, 0
+ il $SP, 16368
+ stqd $0, 0($SP)
+
+ /* Allocate a minimum stack frame for the called main.
+ * This is needed so that main has a place to save the
+ * link register when it calls another function.
+ */
+ stqd $SP, -160($SP)
+ ai $SP, $SP, -160
+
+ /* Call the program's main function. */
+ brsl $0, main
+
+ /* In this case main should not return; if it does
+ * there has been an error in the sequence. Execute
+ * stop-and-signal with code=0.
+ */
+.global exit
+.global _exit
+exit:
+_exit:
+ stop 0x0
+
+ /* Pad the size of this crt0.o to be multiple of 16 bytes. */
+.balignl 16, 0x0
+
diff --git a/arch/powerpc/platforms/cell/spufs/spu_save_dump.h_shipped b/arch/powerpc/platforms/cell/spufs/spu_save_dump.h_shipped
new file mode 100644
index 000000000000..39e54003f1df
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spufs/spu_save_dump.h_shipped
@@ -0,0 +1,191 @@
+/*
+ * spu_save_dump.h: Copyright (C) 2005 IBM.
+ * Hex-dump auto generated from spu_save.c.
+ * Do not edit!
+ */
+static unsigned int spu_save_code[] __page_aligned = {
+0x20805000, 0x20805201, 0x20805402, 0x20805603,
+0x20805804, 0x20805a05, 0x20805c06, 0x20805e07,
+0x20806008, 0x20806209, 0x2080640a, 0x2080660b,
+0x2080680c, 0x20806a0d, 0x20806c0e, 0x20806e0f,
+0x4201c003, 0x33800184, 0x1c010204, 0x40200000,
+0x24000190, 0x24004191, 0x24008192, 0x2400c193,
+0x141fc205, 0x23fffd84, 0x1c100183, 0x217ffb85,
+0x40800000, 0x409ff801, 0x24000080, 0x24fd8081,
+0x1cd80081, 0x33000180, 0x00000000, 0x00000000,
+0x01a00182, 0x3ec00083, 0xb1c38103, 0x01a00204,
+0x3ec10082, 0x4201400d, 0xb1c38202, 0x01a00583,
+0x34218682, 0x3ed80684, 0xb0408184, 0x24218682,
+0x01a00603, 0x00200000, 0x34214682, 0x3ed40684,
+0xb0408184, 0x40800003, 0x24214682, 0x21a00083,
+0x40800082, 0x21a00b02, 0x4020007f, 0x1000251e,
+0x40a80002, 0x32800008, 0x4205c00c, 0x00200000,
+0x40a0000b, 0x3f82070f, 0x4080020a, 0x40800709,
+0x3fe3078f, 0x3fbf0783, 0x3f200183, 0x3fbe0183,
+0x3fe30187, 0x18008387, 0x4205c002, 0x3ac30404,
+0x1cffc489, 0x00200000, 0x18008403, 0x38830402,
+0x4cffc486, 0x3ac28185, 0xb0408584, 0x28830402,
+0x1c020408, 0x38828182, 0xb0408385, 0x1802c387,
+0x28828182, 0x217ff886, 0x04000582, 0x32800007,
+0x21a00802, 0x3fbf0705, 0x3f200285, 0x3fbe0285,
+0x3fe30285, 0x21a00885, 0x04000603, 0x21a00903,
+0x40803c02, 0x21a00982, 0x04000386, 0x21a00a06,
+0x40801202, 0x21a00a82, 0x73000003, 0x24200683,
+0x01a00404, 0x00200000, 0x34204682, 0x3ec40683,
+0xb0408203, 0x24204682, 0x01a00783, 0x00200000,
+0x3421c682, 0x3edc0684, 0xb0408184, 0x2421c682,
+0x21a00806, 0x21a00885, 0x3fbf0784, 0x3f200204,
+0x3fbe0204, 0x3fe30204, 0x21a00904, 0x40804002,
+0x21a00982, 0x21a00a06, 0x40805a02, 0x21a00a82,
+0x04000683, 0x21a00803, 0x21a00885, 0x21a00904,
+0x40848002, 0x21a00982, 0x21a00a06, 0x40801002,
+0x21a00a82, 0x21a00a06, 0x40806602, 0x00200000,
+0x35800009, 0x21a00a82, 0x40800083, 0x21a00b83,
+0x01a00c02, 0x01a00d83, 0x00003ffb, 0x40800003,
+0x4020007f, 0x35000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+};
diff --git a/arch/powerpc/platforms/cell/spufs/spu_utils.h b/arch/powerpc/platforms/cell/spufs/spu_utils.h
new file mode 100644
index 000000000000..58359feb6c95
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spufs/spu_utils.h
@@ -0,0 +1,160 @@
+/*
+ * utils.h: Utilities for SPU-side of the context switch operation.
+ *
+ * (C) Copyright IBM 2005
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _SPU_CONTEXT_UTILS_H_
+#define _SPU_CONTEXT_UTILS_H_
+
+/*
+ * 64-bit safe EA.
+ */
+typedef union {
+ unsigned long long ull;
+ unsigned int ui[2];
+} addr64;
+
+/*
+ * 128-bit register template.
+ */
+typedef union {
+ unsigned int slot[4];
+ vector unsigned int v;
+} spu_reg128v;
+
+/*
+ * DMA list structure.
+ */
+struct dma_list_elem {
+ unsigned int size;
+ unsigned int ea_low;
+};
+
+/*
+ * Declare storage for 8-byte aligned DMA list.
+ */
+struct dma_list_elem dma_list[15] __attribute__ ((aligned(8)));
+
+/*
+ * External definition for storage
+ * declared in crt0.
+ */
+extern spu_reg128v regs_spill[NR_SPU_SPILL_REGS];
+
+/*
+ * Compute LSCSA byte offset for a given field.
+ */
+static struct spu_lscsa *dummy = (struct spu_lscsa *)0;
+#define LSCSA_BYTE_OFFSET(_field) \
+ ((char *)(&(dummy->_field)) - (char *)(&(dummy->gprs[0].slot[0])))
+#define LSCSA_QW_OFFSET(_field) (LSCSA_BYTE_OFFSET(_field) >> 4)
+
+static inline void set_event_mask(void)
+{
+ unsigned int event_mask = 0;
+
+ /* Save, Step 4:
+ * Restore, Step 1:
+ * Set the SPU_RdEventMsk channel to zero to mask
+ * all events.
+ */
+ spu_writech(SPU_WrEventMask, event_mask);
+}
+
+static inline void set_tag_mask(void)
+{
+ unsigned int tag_mask = 1;
+
+ /* Save, Step 5:
+ * Restore, Step 2:
+ * Set the SPU_WrTagMsk channel to '01' to unmask
+ * only tag group 0.
+ */
+ spu_writech(MFC_WrTagMask, tag_mask);
+}
+
+static inline void build_dma_list(addr64 lscsa_ea)
+{
+ unsigned int ea_low;
+ int i;
+
+ /* Save, Step 6:
+ * Restore, Step 3:
+ * Update the effective address for the CSA in the
+ * pre-canned DMA-list in local storage.
+ */
+ ea_low = lscsa_ea.ui[1];
+ ea_low += LSCSA_BYTE_OFFSET(ls[16384]);
+
+ for (i = 0; i < 15; i++, ea_low += 16384) {
+ dma_list[i].size = 16384;
+ dma_list[i].ea_low = ea_low;
+ }
+}
+
+static inline void enqueue_putllc(addr64 lscsa_ea)
+{
+ unsigned int ls = 0;
+ unsigned int size = 128;
+ unsigned int tag_id = 0;
+ unsigned int cmd = 0xB4; /* PUTLLC */
+
+ /* Save, Step 12:
+ * Restore, Step 7:
+ * Send a PUTLLC (tag 0) command to the MFC using
+ * an effective address in the CSA in order to
+ * remove any possible lock-line reservation.
+ */
+ spu_writech(MFC_LSA, ls);
+ spu_writech(MFC_EAH, lscsa_ea.ui[0]);
+ spu_writech(MFC_EAL, lscsa_ea.ui[1]);
+ spu_writech(MFC_Size, size);
+ spu_writech(MFC_TagID, tag_id);
+ spu_writech(MFC_Cmd, cmd);
+}
+
+static inline void set_tag_update(void)
+{
+ unsigned int update_any = 1;
+
+ /* Save, Step 15:
+ * Restore, Step 8:
+ * Write the MFC_TagUpdate channel with '01'.
+ */
+ spu_writech(MFC_WrTagUpdate, update_any);
+}
+
+static inline void read_tag_status(void)
+{
+ /* Save, Step 16:
+ * Restore, Step 9:
+ * Read the MFC_TagStat channel data.
+ */
+ spu_readch(MFC_RdTagStat);
+}
+
+static inline void read_llar_status(void)
+{
+ /* Save, Step 17:
+ * Restore, Step 10:
+ * Read the MFC_AtomicStat channel data.
+ */
+ spu_readch(MFC_RdAtomicStat);
+}
+
+#endif /* _SPU_CONTEXT_UTILS_H_ */
diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h
new file mode 100644
index 000000000000..db2601f0abd5
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -0,0 +1,163 @@
+/*
+ * SPU file system
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * Author: Arnd Bergmann <arndb@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef SPUFS_H
+#define SPUFS_H
+
+#include <linux/kref.h>
+#include <linux/rwsem.h>
+#include <linux/spinlock.h>
+#include <linux/fs.h>
+
+#include <asm/spu.h>
+#include <asm/spu_csa.h>
+
+/* The magic number for our file system */
+enum {
+ SPUFS_MAGIC = 0x23c9b64e,
+};
+
+struct spu_context_ops;
+
+#define SPU_CONTEXT_PREEMPT 0UL
+
+struct spu_context {
+ struct spu *spu; /* pointer to a physical SPU */
+ struct spu_state csa; /* SPU context save area. */
+ spinlock_t mmio_lock; /* protects mmio access */
+ struct address_space *local_store;/* local store backing store */
+
+ enum { SPU_STATE_RUNNABLE, SPU_STATE_SAVED } state;
+ struct rw_semaphore state_sema;
+ struct semaphore run_sema;
+
+ struct mm_struct *owner;
+
+ struct kref kref;
+ wait_queue_head_t ibox_wq;
+ wait_queue_head_t wbox_wq;
+ wait_queue_head_t stop_wq;
+ struct fasync_struct *ibox_fasync;
+ struct fasync_struct *wbox_fasync;
+ struct spu_context_ops *ops;
+ struct work_struct reap_work;
+ u64 flags;
+};
+
+/* SPU context query/set operations. */
+struct spu_context_ops {
+ int (*mbox_read) (struct spu_context * ctx, u32 * data);
+ u32(*mbox_stat_read) (struct spu_context * ctx);
+ unsigned int (*mbox_stat_poll)(struct spu_context *ctx,
+ unsigned int events);
+ int (*ibox_read) (struct spu_context * ctx, u32 * data);
+ int (*wbox_write) (struct spu_context * ctx, u32 data);
+ u32(*signal1_read) (struct spu_context * ctx);
+ void (*signal1_write) (struct spu_context * ctx, u32 data);
+ u32(*signal2_read) (struct spu_context * ctx);
+ void (*signal2_write) (struct spu_context * ctx, u32 data);
+ void (*signal1_type_set) (struct spu_context * ctx, u64 val);
+ u64(*signal1_type_get) (struct spu_context * ctx);
+ void (*signal2_type_set) (struct spu_context * ctx, u64 val);
+ u64(*signal2_type_get) (struct spu_context * ctx);
+ u32(*npc_read) (struct spu_context * ctx);
+ void (*npc_write) (struct spu_context * ctx, u32 data);
+ u32(*status_read) (struct spu_context * ctx);
+ char*(*get_ls) (struct spu_context * ctx);
+ void (*runcntl_write) (struct spu_context * ctx, u32 data);
+ void (*runcntl_stop) (struct spu_context * ctx);
+};
+
+extern struct spu_context_ops spu_hw_ops;
+extern struct spu_context_ops spu_backing_ops;
+
+struct spufs_inode_info {
+ struct spu_context *i_ctx;
+ struct inode vfs_inode;
+};
+#define SPUFS_I(inode) \
+ container_of(inode, struct spufs_inode_info, vfs_inode)
+
+extern struct tree_descr spufs_dir_contents[];
+
+/* system call implementation */
+long spufs_run_spu(struct file *file,
+ struct spu_context *ctx, u32 *npc, u32 *status);
+long spufs_create_thread(struct nameidata *nd,
+ unsigned int flags, mode_t mode);
+extern struct file_operations spufs_context_fops;
+
+/* context management */
+struct spu_context * alloc_spu_context(struct address_space *local_store);
+void destroy_spu_context(struct kref *kref);
+struct spu_context * get_spu_context(struct spu_context *ctx);
+int put_spu_context(struct spu_context *ctx);
+void spu_unmap_mappings(struct spu_context *ctx);
+
+void spu_forget(struct spu_context *ctx);
+void spu_acquire(struct spu_context *ctx);
+void spu_release(struct spu_context *ctx);
+int spu_acquire_runnable(struct spu_context *ctx);
+void spu_acquire_saved(struct spu_context *ctx);
+
+int spu_activate(struct spu_context *ctx, u64 flags);
+void spu_deactivate(struct spu_context *ctx);
+void spu_yield(struct spu_context *ctx);
+int __init spu_sched_init(void);
+void __exit spu_sched_exit(void);
+
+/*
+ * spufs_wait
+ * Same as wait_event_interruptible(), except that here
+ * we need to call spu_release(ctx) before sleeping, and
+ * then spu_acquire(ctx) when awoken.
+ */
+
+#define spufs_wait(wq, condition) \
+({ \
+ int __ret = 0; \
+ DEFINE_WAIT(__wait); \
+ for (;;) { \
+ prepare_to_wait(&(wq), &__wait, TASK_INTERRUPTIBLE); \
+ if (condition) \
+ break; \
+ if (!signal_pending(current)) { \
+ spu_release(ctx); \
+ schedule(); \
+ spu_acquire(ctx); \
+ continue; \
+ } \
+ __ret = -ERESTARTSYS; \
+ break; \
+ } \
+ finish_wait(&(wq), &__wait); \
+ __ret; \
+})
+
+size_t spu_wbox_write(struct spu_context *ctx, u32 data);
+size_t spu_ibox_read(struct spu_context *ctx, u32 *data);
+
+/* irq callback funcs. */
+void spufs_ibox_callback(struct spu *spu);
+void spufs_wbox_callback(struct spu *spu);
+void spufs_stop_callback(struct spu *spu);
+
+#endif
diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c
new file mode 100644
index 000000000000..1061c12b2edb
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spufs/switch.c
@@ -0,0 +1,2180 @@
+/*
+ * spu_switch.c
+ *
+ * (C) Copyright IBM Corp. 2005
+ *
+ * Author: Mark Nutter <mnutter@us.ibm.com>
+ *
+ * Host-side part of SPU context switch sequence outlined in
+ * Synergistic Processor Element, Book IV.
+ *
+ * A fully premptive switch of an SPE is very expensive in terms
+ * of time and system resources. SPE Book IV indicates that SPE
+ * allocation should follow a "serially reusable device" model,
+ * in which the SPE is assigned a task until it completes. When
+ * this is not possible, this sequence may be used to premptively
+ * save, and then later (optionally) restore the context of a
+ * program executing on an SPE.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+
+#include <asm/io.h>
+#include <asm/spu.h>
+#include <asm/spu_csa.h>
+#include <asm/mmu_context.h>
+
+#include "spu_save_dump.h"
+#include "spu_restore_dump.h"
+
+#if 0
+#define POLL_WHILE_TRUE(_c) { \
+ do { \
+ } while (_c); \
+ }
+#else
+#define RELAX_SPIN_COUNT 1000
+#define POLL_WHILE_TRUE(_c) { \
+ do { \
+ int _i; \
+ for (_i=0; _i<RELAX_SPIN_COUNT && (_c); _i++) { \
+ cpu_relax(); \
+ } \
+ if (unlikely(_c)) yield(); \
+ else break; \
+ } while (_c); \
+ }
+#endif /* debug */
+
+#define POLL_WHILE_FALSE(_c) POLL_WHILE_TRUE(!(_c))
+
+static inline void acquire_spu_lock(struct spu *spu)
+{
+ /* Save, Step 1:
+ * Restore, Step 1:
+ * Acquire SPU-specific mutual exclusion lock.
+ * TBD.
+ */
+}
+
+static inline void release_spu_lock(struct spu *spu)
+{
+ /* Restore, Step 76:
+ * Release SPU-specific mutual exclusion lock.
+ * TBD.
+ */
+}
+
+static inline int check_spu_isolate(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+ u32 isolate_state;
+
+ /* Save, Step 2:
+ * Save, Step 6:
+ * If SPU_Status[E,L,IS] any field is '1', this
+ * SPU is in isolate state and cannot be context
+ * saved at this time.
+ */
+ isolate_state = SPU_STATUS_ISOLATED_STATE |
+ SPU_STATUS_ISOLATED_LOAD_STAUTUS | SPU_STATUS_ISOLATED_EXIT_STAUTUS;
+ return (in_be32(&prob->spu_status_R) & isolate_state) ? 1 : 0;
+}
+
+static inline void disable_interrupts(struct spu_state *csa, struct spu *spu)
+{
+ /* Save, Step 3:
+ * Restore, Step 2:
+ * Save INT_Mask_class0 in CSA.
+ * Write INT_MASK_class0 with value of 0.
+ * Save INT_Mask_class1 in CSA.
+ * Write INT_MASK_class1 with value of 0.
+ * Save INT_Mask_class2 in CSA.
+ * Write INT_MASK_class2 with value of 0.
+ */
+ spin_lock_irq(&spu->register_lock);
+ if (csa) {
+ csa->priv1.int_mask_class0_RW = spu_int_mask_get(spu, 0);
+ csa->priv1.int_mask_class1_RW = spu_int_mask_get(spu, 1);
+ csa->priv1.int_mask_class2_RW = spu_int_mask_get(spu, 2);
+ }
+ spu_int_mask_set(spu, 0, 0ul);
+ spu_int_mask_set(spu, 1, 0ul);
+ spu_int_mask_set(spu, 2, 0ul);
+ eieio();
+ spin_unlock_irq(&spu->register_lock);
+}
+
+static inline void set_watchdog_timer(struct spu_state *csa, struct spu *spu)
+{
+ /* Save, Step 4:
+ * Restore, Step 25.
+ * Set a software watchdog timer, which specifies the
+ * maximum allowable time for a context save sequence.
+ *
+ * For present, this implementation will not set a global
+ * watchdog timer, as virtualization & variable system load
+ * may cause unpredictable execution times.
+ */
+}
+
+static inline void inhibit_user_access(struct spu_state *csa, struct spu *spu)
+{
+ /* Save, Step 5:
+ * Restore, Step 3:
+ * Inhibit user-space access (if provided) to this
+ * SPU by unmapping the virtual pages assigned to
+ * the SPU memory-mapped I/O (MMIO) for problem
+ * state. TBD.
+ */
+}
+
+static inline void set_switch_pending(struct spu_state *csa, struct spu *spu)
+{
+ /* Save, Step 7:
+ * Restore, Step 5:
+ * Set a software context switch pending flag.
+ */
+ set_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags);
+ mb();
+}
+
+static inline void save_mfc_cntl(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Save, Step 8:
+ * Read and save MFC_CNTL[Ss].
+ */
+ if (csa) {
+ csa->priv2.mfc_control_RW = in_be64(&priv2->mfc_control_RW) &
+ MFC_CNTL_SUSPEND_DMA_STATUS_MASK;
+ }
+}
+
+static inline void save_spu_runcntl(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+
+ /* Save, Step 9:
+ * Save SPU_Runcntl in the CSA. This value contains
+ * the "Application Desired State".
+ */
+ csa->prob.spu_runcntl_RW = in_be32(&prob->spu_runcntl_RW);
+}
+
+static inline void save_mfc_sr1(struct spu_state *csa, struct spu *spu)
+{
+ /* Save, Step 10:
+ * Save MFC_SR1 in the CSA.
+ */
+ csa->priv1.mfc_sr1_RW = spu_mfc_sr1_get(spu);
+}
+
+static inline void save_spu_status(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+
+ /* Save, Step 11:
+ * Read SPU_Status[R], and save to CSA.
+ */
+ if ((in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING) == 0) {
+ csa->prob.spu_status_R = in_be32(&prob->spu_status_R);
+ } else {
+ u32 stopped;
+
+ out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
+ eieio();
+ POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
+ SPU_STATUS_RUNNING);
+ stopped =
+ SPU_STATUS_INVALID_INSTR | SPU_STATUS_SINGLE_STEP |
+ SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP;
+ if ((in_be32(&prob->spu_status_R) & stopped) == 0)
+ csa->prob.spu_status_R = SPU_STATUS_RUNNING;
+ else
+ csa->prob.spu_status_R = in_be32(&prob->spu_status_R);
+ }
+}
+
+static inline void save_mfc_decr(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Save, Step 12:
+ * Read MFC_CNTL[Ds]. Update saved copy of
+ * CSA.MFC_CNTL[Ds].
+ */
+ if (in_be64(&priv2->mfc_control_RW) & MFC_CNTL_DECREMENTER_RUNNING) {
+ csa->priv2.mfc_control_RW |= MFC_CNTL_DECREMENTER_RUNNING;
+ csa->suspend_time = get_cycles();
+ out_be64(&priv2->spu_chnlcntptr_RW, 7ULL);
+ eieio();
+ csa->spu_chnldata_RW[7] = in_be64(&priv2->spu_chnldata_RW);
+ eieio();
+ }
+}
+
+static inline void halt_mfc_decr(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Save, Step 13:
+ * Write MFC_CNTL[Dh] set to a '1' to halt
+ * the decrementer.
+ */
+ out_be64(&priv2->mfc_control_RW, MFC_CNTL_DECREMENTER_HALTED);
+ eieio();
+}
+
+static inline void save_timebase(struct spu_state *csa, struct spu *spu)
+{
+ /* Save, Step 14:
+ * Read PPE Timebase High and Timebase low registers
+ * and save in CSA. TBD.
+ */
+ csa->suspend_time = get_cycles();
+}
+
+static inline void remove_other_spu_access(struct spu_state *csa,
+ struct spu *spu)
+{
+ /* Save, Step 15:
+ * Remove other SPU access to this SPU by unmapping
+ * this SPU's pages from their address space. TBD.
+ */
+}
+
+static inline void do_mfc_mssync(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+
+ /* Save, Step 16:
+ * Restore, Step 11.
+ * Write SPU_MSSync register. Poll SPU_MSSync[P]
+ * for a value of 0.
+ */
+ out_be64(&prob->spc_mssync_RW, 1UL);
+ POLL_WHILE_TRUE(in_be64(&prob->spc_mssync_RW) & MS_SYNC_PENDING);
+}
+
+static inline void issue_mfc_tlbie(struct spu_state *csa, struct spu *spu)
+{
+ /* Save, Step 17:
+ * Restore, Step 12.
+ * Restore, Step 48.
+ * Write TLB_Invalidate_Entry[IS,VPN,L,Lp]=0 register.
+ * Then issue a PPE sync instruction.
+ */
+ spu_tlb_invalidate(spu);
+ mb();
+}
+
+static inline void handle_pending_interrupts(struct spu_state *csa,
+ struct spu *spu)
+{
+ /* Save, Step 18:
+ * Handle any pending interrupts from this SPU
+ * here. This is OS or hypervisor specific. One
+ * option is to re-enable interrupts to handle any
+ * pending interrupts, with the interrupt handlers
+ * recognizing the software Context Switch Pending
+ * flag, to ensure the SPU execution or MFC command
+ * queue is not restarted. TBD.
+ */
+}
+
+static inline void save_mfc_queues(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+ int i;
+
+ /* Save, Step 19:
+ * If MFC_Cntl[Se]=0 then save
+ * MFC command queues.
+ */
+ if ((in_be64(&priv2->mfc_control_RW) & MFC_CNTL_DMA_QUEUES_EMPTY) == 0) {
+ for (i = 0; i < 8; i++) {
+ csa->priv2.puq[i].mfc_cq_data0_RW =
+ in_be64(&priv2->puq[i].mfc_cq_data0_RW);
+ csa->priv2.puq[i].mfc_cq_data1_RW =
+ in_be64(&priv2->puq[i].mfc_cq_data1_RW);
+ csa->priv2.puq[i].mfc_cq_data2_RW =
+ in_be64(&priv2->puq[i].mfc_cq_data2_RW);
+ csa->priv2.puq[i].mfc_cq_data3_RW =
+ in_be64(&priv2->puq[i].mfc_cq_data3_RW);
+ }
+ for (i = 0; i < 16; i++) {
+ csa->priv2.spuq[i].mfc_cq_data0_RW =
+ in_be64(&priv2->spuq[i].mfc_cq_data0_RW);
+ csa->priv2.spuq[i].mfc_cq_data1_RW =
+ in_be64(&priv2->spuq[i].mfc_cq_data1_RW);
+ csa->priv2.spuq[i].mfc_cq_data2_RW =
+ in_be64(&priv2->spuq[i].mfc_cq_data2_RW);
+ csa->priv2.spuq[i].mfc_cq_data3_RW =
+ in_be64(&priv2->spuq[i].mfc_cq_data3_RW);
+ }
+ }
+}
+
+static inline void save_ppu_querymask(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+
+ /* Save, Step 20:
+ * Save the PPU_QueryMask register
+ * in the CSA.
+ */
+ csa->prob.dma_querymask_RW = in_be32(&prob->dma_querymask_RW);
+}
+
+static inline void save_ppu_querytype(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+
+ /* Save, Step 21:
+ * Save the PPU_QueryType register
+ * in the CSA.
+ */
+ csa->prob.dma_querytype_RW = in_be32(&prob->dma_querytype_RW);
+}
+
+static inline void save_mfc_csr_tsq(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Save, Step 22:
+ * Save the MFC_CSR_TSQ register
+ * in the LSCSA.
+ */
+ csa->priv2.spu_tag_status_query_RW =
+ in_be64(&priv2->spu_tag_status_query_RW);
+}
+
+static inline void save_mfc_csr_cmd(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Save, Step 23:
+ * Save the MFC_CSR_CMD1 and MFC_CSR_CMD2
+ * registers in the CSA.
+ */
+ csa->priv2.spu_cmd_buf1_RW = in_be64(&priv2->spu_cmd_buf1_RW);
+ csa->priv2.spu_cmd_buf2_RW = in_be64(&priv2->spu_cmd_buf2_RW);
+}
+
+static inline void save_mfc_csr_ato(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Save, Step 24:
+ * Save the MFC_CSR_ATO register in
+ * the CSA.
+ */
+ csa->priv2.spu_atomic_status_RW = in_be64(&priv2->spu_atomic_status_RW);
+}
+
+static inline void save_mfc_tclass_id(struct spu_state *csa, struct spu *spu)
+{
+ /* Save, Step 25:
+ * Save the MFC_TCLASS_ID register in
+ * the CSA.
+ */
+ csa->priv1.mfc_tclass_id_RW = spu_mfc_tclass_id_get(spu);
+}
+
+static inline void set_mfc_tclass_id(struct spu_state *csa, struct spu *spu)
+{
+ /* Save, Step 26:
+ * Restore, Step 23.
+ * Write the MFC_TCLASS_ID register with
+ * the value 0x10000000.
+ */
+ spu_mfc_tclass_id_set(spu, 0x10000000);
+ eieio();
+}
+
+static inline void purge_mfc_queue(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Save, Step 27:
+ * Restore, Step 14.
+ * Write MFC_CNTL[Pc]=1 (purge queue).
+ */
+ out_be64(&priv2->mfc_control_RW, MFC_CNTL_PURGE_DMA_REQUEST);
+ eieio();
+}
+
+static inline void wait_purge_complete(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Save, Step 28:
+ * Poll MFC_CNTL[Ps] until value '11' is read
+ * (purge complete).
+ */
+ POLL_WHILE_FALSE(in_be64(&priv2->mfc_control_RW) &
+ MFC_CNTL_PURGE_DMA_COMPLETE);
+}
+
+static inline void save_mfc_slbs(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+ int i;
+
+ /* Save, Step 29:
+ * If MFC_SR1[R]='1', save SLBs in CSA.
+ */
+ if (spu_mfc_sr1_get(spu) & MFC_STATE1_RELOCATE_MASK) {
+ csa->priv2.slb_index_W = in_be64(&priv2->slb_index_W);
+ for (i = 0; i < 8; i++) {
+ out_be64(&priv2->slb_index_W, i);
+ eieio();
+ csa->slb_esid_RW[i] = in_be64(&priv2->slb_esid_RW);
+ csa->slb_vsid_RW[i] = in_be64(&priv2->slb_vsid_RW);
+ eieio();
+ }
+ }
+}
+
+static inline void setup_mfc_sr1(struct spu_state *csa, struct spu *spu)
+{
+ /* Save, Step 30:
+ * Restore, Step 18:
+ * Write MFC_SR1 with MFC_SR1[D=0,S=1] and
+ * MFC_SR1[TL,R,Pr,T] set correctly for the
+ * OS specific environment.
+ *
+ * Implementation note: The SPU-side code
+ * for save/restore is privileged, so the
+ * MFC_SR1[Pr] bit is not set.
+ *
+ */
+ spu_mfc_sr1_set(spu, (MFC_STATE1_MASTER_RUN_CONTROL_MASK |
+ MFC_STATE1_RELOCATE_MASK |
+ MFC_STATE1_BUS_TLBIE_MASK));
+}
+
+static inline void save_spu_npc(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+
+ /* Save, Step 31:
+ * Save SPU_NPC in the CSA.
+ */
+ csa->prob.spu_npc_RW = in_be32(&prob->spu_npc_RW);
+}
+
+static inline void save_spu_privcntl(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Save, Step 32:
+ * Save SPU_PrivCntl in the CSA.
+ */
+ csa->priv2.spu_privcntl_RW = in_be64(&priv2->spu_privcntl_RW);
+}
+
+static inline void reset_spu_privcntl(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Save, Step 33:
+ * Restore, Step 16:
+ * Write SPU_PrivCntl[S,Le,A] fields reset to 0.
+ */
+ out_be64(&priv2->spu_privcntl_RW, 0UL);
+ eieio();
+}
+
+static inline void save_spu_lslr(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Save, Step 34:
+ * Save SPU_LSLR in the CSA.
+ */
+ csa->priv2.spu_lslr_RW = in_be64(&priv2->spu_lslr_RW);
+}
+
+static inline void reset_spu_lslr(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Save, Step 35:
+ * Restore, Step 17.
+ * Reset SPU_LSLR.
+ */
+ out_be64(&priv2->spu_lslr_RW, LS_ADDR_MASK);
+ eieio();
+}
+
+static inline void save_spu_cfg(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Save, Step 36:
+ * Save SPU_Cfg in the CSA.
+ */
+ csa->priv2.spu_cfg_RW = in_be64(&priv2->spu_cfg_RW);
+}
+
+static inline void save_pm_trace(struct spu_state *csa, struct spu *spu)
+{
+ /* Save, Step 37:
+ * Save PM_Trace_Tag_Wait_Mask in the CSA.
+ * Not performed by this implementation.
+ */
+}
+
+static inline void save_mfc_rag(struct spu_state *csa, struct spu *spu)
+{
+ /* Save, Step 38:
+ * Save RA_GROUP_ID register and the
+ * RA_ENABLE reigster in the CSA.
+ */
+ csa->priv1.resource_allocation_groupID_RW =
+ spu_resource_allocation_groupID_get(spu);
+ csa->priv1.resource_allocation_enable_RW =
+ spu_resource_allocation_enable_get(spu);
+}
+
+static inline void save_ppu_mb_stat(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+
+ /* Save, Step 39:
+ * Save MB_Stat register in the CSA.
+ */
+ csa->prob.mb_stat_R = in_be32(&prob->mb_stat_R);
+}
+
+static inline void save_ppu_mb(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+
+ /* Save, Step 40:
+ * Save the PPU_MB register in the CSA.
+ */
+ csa->prob.pu_mb_R = in_be32(&prob->pu_mb_R);
+}
+
+static inline void save_ppuint_mb(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Save, Step 41:
+ * Save the PPUINT_MB register in the CSA.
+ */
+ csa->priv2.puint_mb_R = in_be64(&priv2->puint_mb_R);
+}
+
+static inline void save_ch_part1(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+ u64 idx, ch_indices[7] = { 0UL, 1UL, 3UL, 4UL, 24UL, 25UL, 27UL };
+ int i;
+
+ /* Save, Step 42:
+ * Save the following CH: [0,1,3,4,24,25,27]
+ */
+ for (i = 0; i < 7; i++) {
+ idx = ch_indices[i];
+ out_be64(&priv2->spu_chnlcntptr_RW, idx);
+ eieio();
+ csa->spu_chnldata_RW[idx] = in_be64(&priv2->spu_chnldata_RW);
+ csa->spu_chnlcnt_RW[idx] = in_be64(&priv2->spu_chnlcnt_RW);
+ out_be64(&priv2->spu_chnldata_RW, 0UL);
+ out_be64(&priv2->spu_chnlcnt_RW, 0UL);
+ eieio();
+ }
+}
+
+static inline void save_spu_mb(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+ int i;
+
+ /* Save, Step 43:
+ * Save SPU Read Mailbox Channel.
+ */
+ out_be64(&priv2->spu_chnlcntptr_RW, 29UL);
+ eieio();
+ csa->spu_chnlcnt_RW[29] = in_be64(&priv2->spu_chnlcnt_RW);
+ for (i = 0; i < 4; i++) {
+ csa->spu_mailbox_data[i] = in_be64(&priv2->spu_chnldata_RW);
+ }
+ out_be64(&priv2->spu_chnlcnt_RW, 0UL);
+ eieio();
+}
+
+static inline void save_mfc_cmd(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Save, Step 44:
+ * Save MFC_CMD Channel.
+ */
+ out_be64(&priv2->spu_chnlcntptr_RW, 21UL);
+ eieio();
+ csa->spu_chnlcnt_RW[21] = in_be64(&priv2->spu_chnlcnt_RW);
+ eieio();
+}
+
+static inline void reset_ch(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+ u64 ch_indices[4] = { 21UL, 23UL, 28UL, 30UL };
+ u64 ch_counts[4] = { 16UL, 1UL, 1UL, 1UL };
+ u64 idx;
+ int i;
+
+ /* Save, Step 45:
+ * Reset the following CH: [21, 23, 28, 30]
+ */
+ for (i = 0; i < 4; i++) {
+ idx = ch_indices[i];
+ out_be64(&priv2->spu_chnlcntptr_RW, idx);
+ eieio();
+ out_be64(&priv2->spu_chnlcnt_RW, ch_counts[i]);
+ eieio();
+ }
+}
+
+static inline void resume_mfc_queue(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Save, Step 46:
+ * Restore, Step 25.
+ * Write MFC_CNTL[Sc]=0 (resume queue processing).
+ */
+ out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESUME_DMA_QUEUE);
+}
+
+static inline void invalidate_slbs(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Save, Step 45:
+ * Restore, Step 19:
+ * If MFC_SR1[R]=1, write 0 to SLB_Invalidate_All.
+ */
+ if (spu_mfc_sr1_get(spu) & MFC_STATE1_RELOCATE_MASK) {
+ out_be64(&priv2->slb_invalidate_all_W, 0UL);
+ eieio();
+ }
+}
+
+static inline void get_kernel_slb(u64 ea, u64 slb[2])
+{
+ slb[0] = (get_kernel_vsid(ea) << SLB_VSID_SHIFT) | SLB_VSID_KERNEL;
+ slb[1] = (ea & ESID_MASK) | SLB_ESID_V;
+
+ /* Large pages are used for kernel text/data, but not vmalloc. */
+ if (cpu_has_feature(CPU_FTR_16M_PAGE)
+ && REGION_ID(ea) == KERNEL_REGION_ID)
+ slb[0] |= SLB_VSID_L;
+}
+
+static inline void load_mfc_slb(struct spu *spu, u64 slb[2], int slbe)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ out_be64(&priv2->slb_index_W, slbe);
+ eieio();
+ out_be64(&priv2->slb_vsid_RW, slb[0]);
+ out_be64(&priv2->slb_esid_RW, slb[1]);
+ eieio();
+}
+
+static inline void setup_mfc_slbs(struct spu_state *csa, struct spu *spu)
+{
+ u64 code_slb[2];
+ u64 lscsa_slb[2];
+
+ /* Save, Step 47:
+ * Restore, Step 30.
+ * If MFC_SR1[R]=1, write 0 to SLB_Invalidate_All
+ * register, then initialize SLB_VSID and SLB_ESID
+ * to provide access to SPU context save code and
+ * LSCSA.
+ *
+ * This implementation places both the context
+ * switch code and LSCSA in kernel address space.
+ *
+ * Further this implementation assumes that the
+ * MFC_SR1[R]=1 (in other words, assume that
+ * translation is desired by OS environment).
+ */
+ invalidate_slbs(csa, spu);
+ get_kernel_slb((unsigned long)&spu_save_code[0], code_slb);
+ get_kernel_slb((unsigned long)csa->lscsa, lscsa_slb);
+ load_mfc_slb(spu, code_slb, 0);
+ if ((lscsa_slb[0] != code_slb[0]) || (lscsa_slb[1] != code_slb[1]))
+ load_mfc_slb(spu, lscsa_slb, 1);
+}
+
+static inline void set_switch_active(struct spu_state *csa, struct spu *spu)
+{
+ /* Save, Step 48:
+ * Restore, Step 23.
+ * Change the software context switch pending flag
+ * to context switch active.
+ */
+ set_bit(SPU_CONTEXT_SWITCH_ACTIVE, &spu->flags);
+ clear_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags);
+ mb();
+}
+
+static inline void enable_interrupts(struct spu_state *csa, struct spu *spu)
+{
+ unsigned long class1_mask = CLASS1_ENABLE_SEGMENT_FAULT_INTR |
+ CLASS1_ENABLE_STORAGE_FAULT_INTR;
+
+ /* Save, Step 49:
+ * Restore, Step 22:
+ * Reset and then enable interrupts, as
+ * needed by OS.
+ *
+ * This implementation enables only class1
+ * (translation) interrupts.
+ */
+ spin_lock_irq(&spu->register_lock);
+ spu_int_stat_clear(spu, 0, ~0ul);
+ spu_int_stat_clear(spu, 1, ~0ul);
+ spu_int_stat_clear(spu, 2, ~0ul);
+ spu_int_mask_set(spu, 0, 0ul);
+ spu_int_mask_set(spu, 1, class1_mask);
+ spu_int_mask_set(spu, 2, 0ul);
+ spin_unlock_irq(&spu->register_lock);
+}
+
+static inline int send_mfc_dma(struct spu *spu, unsigned long ea,
+ unsigned int ls_offset, unsigned int size,
+ unsigned int tag, unsigned int rclass,
+ unsigned int cmd)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+ union mfc_tag_size_class_cmd command;
+ unsigned int transfer_size;
+ volatile unsigned int status = 0x0;
+
+ while (size > 0) {
+ transfer_size =
+ (size > MFC_MAX_DMA_SIZE) ? MFC_MAX_DMA_SIZE : size;
+ command.u.mfc_size = transfer_size;
+ command.u.mfc_tag = tag;
+ command.u.mfc_rclassid = rclass;
+ command.u.mfc_cmd = cmd;
+ do {
+ out_be32(&prob->mfc_lsa_W, ls_offset);
+ out_be64(&prob->mfc_ea_W, ea);
+ out_be64(&prob->mfc_union_W.all64, command.all64);
+ status =
+ in_be32(&prob->mfc_union_W.by32.mfc_class_cmd32);
+ if (unlikely(status & 0x2)) {
+ cpu_relax();
+ }
+ } while (status & 0x3);
+ size -= transfer_size;
+ ea += transfer_size;
+ ls_offset += transfer_size;
+ }
+ return 0;
+}
+
+static inline void save_ls_16kb(struct spu_state *csa, struct spu *spu)
+{
+ unsigned long addr = (unsigned long)&csa->lscsa->ls[0];
+ unsigned int ls_offset = 0x0;
+ unsigned int size = 16384;
+ unsigned int tag = 0;
+ unsigned int rclass = 0;
+ unsigned int cmd = MFC_PUT_CMD;
+
+ /* Save, Step 50:
+ * Issue a DMA command to copy the first 16K bytes
+ * of local storage to the CSA.
+ */
+ send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd);
+}
+
+static inline void set_spu_npc(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+
+ /* Save, Step 51:
+ * Restore, Step 31.
+ * Write SPU_NPC[IE]=0 and SPU_NPC[LSA] to entry
+ * point address of context save code in local
+ * storage.
+ *
+ * This implementation uses SPU-side save/restore
+ * programs with entry points at LSA of 0.
+ */
+ out_be32(&prob->spu_npc_RW, 0);
+ eieio();
+}
+
+static inline void set_signot1(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+ union {
+ u64 ull;
+ u32 ui[2];
+ } addr64;
+
+ /* Save, Step 52:
+ * Restore, Step 32:
+ * Write SPU_Sig_Notify_1 register with upper 32-bits
+ * of the CSA.LSCSA effective address.
+ */
+ addr64.ull = (u64) csa->lscsa;
+ out_be32(&prob->signal_notify1, addr64.ui[0]);
+ eieio();
+}
+
+static inline void set_signot2(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+ union {
+ u64 ull;
+ u32 ui[2];
+ } addr64;
+
+ /* Save, Step 53:
+ * Restore, Step 33:
+ * Write SPU_Sig_Notify_2 register with lower 32-bits
+ * of the CSA.LSCSA effective address.
+ */
+ addr64.ull = (u64) csa->lscsa;
+ out_be32(&prob->signal_notify2, addr64.ui[1]);
+ eieio();
+}
+
+static inline void send_save_code(struct spu_state *csa, struct spu *spu)
+{
+ unsigned long addr = (unsigned long)&spu_save_code[0];
+ unsigned int ls_offset = 0x0;
+ unsigned int size = sizeof(spu_save_code);
+ unsigned int tag = 0;
+ unsigned int rclass = 0;
+ unsigned int cmd = MFC_GETFS_CMD;
+
+ /* Save, Step 54:
+ * Issue a DMA command to copy context save code
+ * to local storage and start SPU.
+ */
+ send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd);
+}
+
+static inline void set_ppu_querymask(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+
+ /* Save, Step 55:
+ * Restore, Step 38.
+ * Write PPU_QueryMask=1 (enable Tag Group 0)
+ * and issue eieio instruction.
+ */
+ out_be32(&prob->dma_querymask_RW, MFC_TAGID_TO_TAGMASK(0));
+ eieio();
+}
+
+static inline void wait_tag_complete(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+ u32 mask = MFC_TAGID_TO_TAGMASK(0);
+ unsigned long flags;
+
+ /* Save, Step 56:
+ * Restore, Step 39.
+ * Restore, Step 39.
+ * Restore, Step 46.
+ * Poll PPU_TagStatus[gn] until 01 (Tag group 0 complete)
+ * or write PPU_QueryType[TS]=01 and wait for Tag Group
+ * Complete Interrupt. Write INT_Stat_Class0 or
+ * INT_Stat_Class2 with value of 'handled'.
+ */
+ POLL_WHILE_FALSE(in_be32(&prob->dma_tagstatus_R) & mask);
+
+ local_irq_save(flags);
+ spu_int_stat_clear(spu, 0, ~(0ul));
+ spu_int_stat_clear(spu, 2, ~(0ul));
+ local_irq_restore(flags);
+}
+
+static inline void wait_spu_stopped(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+ unsigned long flags;
+
+ /* Save, Step 57:
+ * Restore, Step 40.
+ * Poll until SPU_Status[R]=0 or wait for SPU Class 0
+ * or SPU Class 2 interrupt. Write INT_Stat_class0
+ * or INT_Stat_class2 with value of handled.
+ */
+ POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING);
+
+ local_irq_save(flags);
+ spu_int_stat_clear(spu, 0, ~(0ul));
+ spu_int_stat_clear(spu, 2, ~(0ul));
+ local_irq_restore(flags);
+}
+
+static inline int check_save_status(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+ u32 complete;
+
+ /* Save, Step 54:
+ * If SPU_Status[P]=1 and SPU_Status[SC] = "success",
+ * context save succeeded, otherwise context save
+ * failed.
+ */
+ complete = ((SPU_SAVE_COMPLETE << SPU_STOP_STATUS_SHIFT) |
+ SPU_STATUS_STOPPED_BY_STOP);
+ return (in_be32(&prob->spu_status_R) != complete) ? 1 : 0;
+}
+
+static inline void terminate_spu_app(struct spu_state *csa, struct spu *spu)
+{
+ /* Restore, Step 4:
+ * If required, notify the "using application" that
+ * the SPU task has been terminated. TBD.
+ */
+}
+
+static inline void suspend_mfc(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Restore, Step 7:
+ * Restore, Step 47.
+ * Write MFC_Cntl[Dh,Sc]='1','1' to suspend
+ * the queue and halt the decrementer.
+ */
+ out_be64(&priv2->mfc_control_RW, MFC_CNTL_SUSPEND_DMA_QUEUE |
+ MFC_CNTL_DECREMENTER_HALTED);
+ eieio();
+}
+
+static inline void wait_suspend_mfc_complete(struct spu_state *csa,
+ struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Restore, Step 8:
+ * Restore, Step 47.
+ * Poll MFC_CNTL[Ss] until 11 is returned.
+ */
+ POLL_WHILE_FALSE(in_be64(&priv2->mfc_control_RW) &
+ MFC_CNTL_SUSPEND_COMPLETE);
+}
+
+static inline int suspend_spe(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+
+ /* Restore, Step 9:
+ * If SPU_Status[R]=1, stop SPU execution
+ * and wait for stop to complete.
+ *
+ * Returns 1 if SPU_Status[R]=1 on entry.
+ * 0 otherwise
+ */
+ if (in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING) {
+ if (in_be32(&prob->spu_status_R) &
+ SPU_STATUS_ISOLATED_EXIT_STAUTUS) {
+ POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
+ SPU_STATUS_RUNNING);
+ }
+ if ((in_be32(&prob->spu_status_R) &
+ SPU_STATUS_ISOLATED_LOAD_STAUTUS)
+ || (in_be32(&prob->spu_status_R) &
+ SPU_STATUS_ISOLATED_STATE)) {
+ out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
+ eieio();
+ POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
+ SPU_STATUS_RUNNING);
+ out_be32(&prob->spu_runcntl_RW, 0x2);
+ eieio();
+ POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
+ SPU_STATUS_RUNNING);
+ }
+ if (in_be32(&prob->spu_status_R) &
+ SPU_STATUS_WAITING_FOR_CHANNEL) {
+ out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
+ eieio();
+ POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
+ SPU_STATUS_RUNNING);
+ }
+ return 1;
+ }
+ return 0;
+}
+
+static inline void clear_spu_status(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+
+ /* Restore, Step 10:
+ * If SPU_Status[R]=0 and SPU_Status[E,L,IS]=1,
+ * release SPU from isolate state.
+ */
+ if (!(in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING)) {
+ if (in_be32(&prob->spu_status_R) &
+ SPU_STATUS_ISOLATED_EXIT_STAUTUS) {
+ spu_mfc_sr1_set(spu,
+ MFC_STATE1_MASTER_RUN_CONTROL_MASK);
+ eieio();
+ out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE);
+ eieio();
+ POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
+ SPU_STATUS_RUNNING);
+ }
+ if ((in_be32(&prob->spu_status_R) &
+ SPU_STATUS_ISOLATED_LOAD_STAUTUS)
+ || (in_be32(&prob->spu_status_R) &
+ SPU_STATUS_ISOLATED_STATE)) {
+ spu_mfc_sr1_set(spu,
+ MFC_STATE1_MASTER_RUN_CONTROL_MASK);
+ eieio();
+ out_be32(&prob->spu_runcntl_RW, 0x2);
+ eieio();
+ POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
+ SPU_STATUS_RUNNING);
+ }
+ }
+}
+
+static inline void reset_ch_part1(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+ u64 ch_indices[7] = { 0UL, 1UL, 3UL, 4UL, 24UL, 25UL, 27UL };
+ u64 idx;
+ int i;
+
+ /* Restore, Step 20:
+ * Reset the following CH: [0,1,3,4,24,25,27]
+ */
+ for (i = 0; i < 7; i++) {
+ idx = ch_indices[i];
+ out_be64(&priv2->spu_chnlcntptr_RW, idx);
+ eieio();
+ out_be64(&priv2->spu_chnldata_RW, 0UL);
+ out_be64(&priv2->spu_chnlcnt_RW, 0UL);
+ eieio();
+ }
+}
+
+static inline void reset_ch_part2(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+ u64 ch_indices[5] = { 21UL, 23UL, 28UL, 29UL, 30UL };
+ u64 ch_counts[5] = { 16UL, 1UL, 1UL, 0UL, 1UL };
+ u64 idx;
+ int i;
+
+ /* Restore, Step 21:
+ * Reset the following CH: [21, 23, 28, 29, 30]
+ */
+ for (i = 0; i < 5; i++) {
+ idx = ch_indices[i];
+ out_be64(&priv2->spu_chnlcntptr_RW, idx);
+ eieio();
+ out_be64(&priv2->spu_chnlcnt_RW, ch_counts[i]);
+ eieio();
+ }
+}
+
+static inline void setup_spu_status_part1(struct spu_state *csa,
+ struct spu *spu)
+{
+ u32 status_P = SPU_STATUS_STOPPED_BY_STOP;
+ u32 status_I = SPU_STATUS_INVALID_INSTR;
+ u32 status_H = SPU_STATUS_STOPPED_BY_HALT;
+ u32 status_S = SPU_STATUS_SINGLE_STEP;
+ u32 status_S_I = SPU_STATUS_SINGLE_STEP | SPU_STATUS_INVALID_INSTR;
+ u32 status_S_P = SPU_STATUS_SINGLE_STEP | SPU_STATUS_STOPPED_BY_STOP;
+ u32 status_P_H = SPU_STATUS_STOPPED_BY_HALT |SPU_STATUS_STOPPED_BY_STOP;
+ u32 status_P_I = SPU_STATUS_STOPPED_BY_STOP |SPU_STATUS_INVALID_INSTR;
+ u32 status_code;
+
+ /* Restore, Step 27:
+ * If the CSA.SPU_Status[I,S,H,P]=1 then add the correct
+ * instruction sequence to the end of the SPU based restore
+ * code (after the "context restored" stop and signal) to
+ * restore the correct SPU status.
+ *
+ * NOTE: Rather than modifying the SPU executable, we
+ * instead add a new 'stopped_status' field to the
+ * LSCSA. The SPU-side restore reads this field and
+ * takes the appropriate action when exiting.
+ */
+
+ status_code =
+ (csa->prob.spu_status_R >> SPU_STOP_STATUS_SHIFT) & 0xFFFF;
+ if ((csa->prob.spu_status_R & status_P_I) == status_P_I) {
+
+ /* SPU_Status[P,I]=1 - Illegal Instruction followed
+ * by Stop and Signal instruction, followed by 'br -4'.
+ *
+ */
+ csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_P_I;
+ csa->lscsa->stopped_status.slot[1] = status_code;
+
+ } else if ((csa->prob.spu_status_R & status_P_H) == status_P_H) {
+
+ /* SPU_Status[P,H]=1 - Halt Conditional, followed
+ * by Stop and Signal instruction, followed by
+ * 'br -4'.
+ */
+ csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_P_H;
+ csa->lscsa->stopped_status.slot[1] = status_code;
+
+ } else if ((csa->prob.spu_status_R & status_S_P) == status_S_P) {
+
+ /* SPU_Status[S,P]=1 - Stop and Signal instruction
+ * followed by 'br -4'.
+ */
+ csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_S_P;
+ csa->lscsa->stopped_status.slot[1] = status_code;
+
+ } else if ((csa->prob.spu_status_R & status_S_I) == status_S_I) {
+
+ /* SPU_Status[S,I]=1 - Illegal instruction followed
+ * by 'br -4'.
+ */
+ csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_S_I;
+ csa->lscsa->stopped_status.slot[1] = status_code;
+
+ } else if ((csa->prob.spu_status_R & status_P) == status_P) {
+
+ /* SPU_Status[P]=1 - Stop and Signal instruction
+ * followed by 'br -4'.
+ */
+ csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_P;
+ csa->lscsa->stopped_status.slot[1] = status_code;
+
+ } else if ((csa->prob.spu_status_R & status_H) == status_H) {
+
+ /* SPU_Status[H]=1 - Halt Conditional, followed
+ * by 'br -4'.
+ */
+ csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_H;
+
+ } else if ((csa->prob.spu_status_R & status_S) == status_S) {
+
+ /* SPU_Status[S]=1 - Two nop instructions.
+ */
+ csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_S;
+
+ } else if ((csa->prob.spu_status_R & status_I) == status_I) {
+
+ /* SPU_Status[I]=1 - Illegal instruction followed
+ * by 'br -4'.
+ */
+ csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_I;
+
+ }
+}
+
+static inline void setup_spu_status_part2(struct spu_state *csa,
+ struct spu *spu)
+{
+ u32 mask;
+
+ /* Restore, Step 28:
+ * If the CSA.SPU_Status[I,S,H,P,R]=0 then
+ * add a 'br *' instruction to the end of
+ * the SPU based restore code.
+ *
+ * NOTE: Rather than modifying the SPU executable, we
+ * instead add a new 'stopped_status' field to the
+ * LSCSA. The SPU-side restore reads this field and
+ * takes the appropriate action when exiting.
+ */
+ mask = SPU_STATUS_INVALID_INSTR |
+ SPU_STATUS_SINGLE_STEP |
+ SPU_STATUS_STOPPED_BY_HALT |
+ SPU_STATUS_STOPPED_BY_STOP | SPU_STATUS_RUNNING;
+ if (!(csa->prob.spu_status_R & mask)) {
+ csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_R;
+ }
+}
+
+static inline void restore_mfc_rag(struct spu_state *csa, struct spu *spu)
+{
+ /* Restore, Step 29:
+ * Restore RA_GROUP_ID register and the
+ * RA_ENABLE reigster from the CSA.
+ */
+ spu_resource_allocation_groupID_set(spu,
+ csa->priv1.resource_allocation_groupID_RW);
+ spu_resource_allocation_enable_set(spu,
+ csa->priv1.resource_allocation_enable_RW);
+}
+
+static inline void send_restore_code(struct spu_state *csa, struct spu *spu)
+{
+ unsigned long addr = (unsigned long)&spu_restore_code[0];
+ unsigned int ls_offset = 0x0;
+ unsigned int size = sizeof(spu_restore_code);
+ unsigned int tag = 0;
+ unsigned int rclass = 0;
+ unsigned int cmd = MFC_GETFS_CMD;
+
+ /* Restore, Step 37:
+ * Issue MFC DMA command to copy context
+ * restore code to local storage.
+ */
+ send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd);
+}
+
+static inline void setup_decr(struct spu_state *csa, struct spu *spu)
+{
+ /* Restore, Step 34:
+ * If CSA.MFC_CNTL[Ds]=1 (decrementer was
+ * running) then adjust decrementer, set
+ * decrementer running status in LSCSA,
+ * and set decrementer "wrapped" status
+ * in LSCSA.
+ */
+ if (csa->priv2.mfc_control_RW & MFC_CNTL_DECREMENTER_RUNNING) {
+ cycles_t resume_time = get_cycles();
+ cycles_t delta_time = resume_time - csa->suspend_time;
+
+ csa->lscsa->decr.slot[0] = delta_time;
+ }
+}
+
+static inline void setup_ppu_mb(struct spu_state *csa, struct spu *spu)
+{
+ /* Restore, Step 35:
+ * Copy the CSA.PU_MB data into the LSCSA.
+ */
+ csa->lscsa->ppu_mb.slot[0] = csa->prob.pu_mb_R;
+}
+
+static inline void setup_ppuint_mb(struct spu_state *csa, struct spu *spu)
+{
+ /* Restore, Step 36:
+ * Copy the CSA.PUINT_MB data into the LSCSA.
+ */
+ csa->lscsa->ppuint_mb.slot[0] = csa->priv2.puint_mb_R;
+}
+
+static inline int check_restore_status(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+ u32 complete;
+
+ /* Restore, Step 40:
+ * If SPU_Status[P]=1 and SPU_Status[SC] = "success",
+ * context restore succeeded, otherwise context restore
+ * failed.
+ */
+ complete = ((SPU_RESTORE_COMPLETE << SPU_STOP_STATUS_SHIFT) |
+ SPU_STATUS_STOPPED_BY_STOP);
+ return (in_be32(&prob->spu_status_R) != complete) ? 1 : 0;
+}
+
+static inline void restore_spu_privcntl(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Restore, Step 41:
+ * Restore SPU_PrivCntl from the CSA.
+ */
+ out_be64(&priv2->spu_privcntl_RW, csa->priv2.spu_privcntl_RW);
+ eieio();
+}
+
+static inline void restore_status_part1(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+ u32 mask;
+
+ /* Restore, Step 42:
+ * If any CSA.SPU_Status[I,S,H,P]=1, then
+ * restore the error or single step state.
+ */
+ mask = SPU_STATUS_INVALID_INSTR |
+ SPU_STATUS_SINGLE_STEP |
+ SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP;
+ if (csa->prob.spu_status_R & mask) {
+ out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE);
+ eieio();
+ POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
+ SPU_STATUS_RUNNING);
+ }
+}
+
+static inline void restore_status_part2(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+ u32 mask;
+
+ /* Restore, Step 43:
+ * If all CSA.SPU_Status[I,S,H,P,R]=0 then write
+ * SPU_RunCntl[R0R1]='01', wait for SPU_Status[R]=1,
+ * then write '00' to SPU_RunCntl[R0R1] and wait
+ * for SPU_Status[R]=0.
+ */
+ mask = SPU_STATUS_INVALID_INSTR |
+ SPU_STATUS_SINGLE_STEP |
+ SPU_STATUS_STOPPED_BY_HALT |
+ SPU_STATUS_STOPPED_BY_STOP | SPU_STATUS_RUNNING;
+ if (!(csa->prob.spu_status_R & mask)) {
+ out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE);
+ eieio();
+ POLL_WHILE_FALSE(in_be32(&prob->spu_status_R) &
+ SPU_STATUS_RUNNING);
+ out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
+ eieio();
+ POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
+ SPU_STATUS_RUNNING);
+ }
+}
+
+static inline void restore_ls_16kb(struct spu_state *csa, struct spu *spu)
+{
+ unsigned long addr = (unsigned long)&csa->lscsa->ls[0];
+ unsigned int ls_offset = 0x0;
+ unsigned int size = 16384;
+ unsigned int tag = 0;
+ unsigned int rclass = 0;
+ unsigned int cmd = MFC_GET_CMD;
+
+ /* Restore, Step 44:
+ * Issue a DMA command to restore the first
+ * 16kb of local storage from CSA.
+ */
+ send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd);
+}
+
+static inline void clear_interrupts(struct spu_state *csa, struct spu *spu)
+{
+ /* Restore, Step 49:
+ * Write INT_MASK_class0 with value of 0.
+ * Write INT_MASK_class1 with value of 0.
+ * Write INT_MASK_class2 with value of 0.
+ * Write INT_STAT_class0 with value of -1.
+ * Write INT_STAT_class1 with value of -1.
+ * Write INT_STAT_class2 with value of -1.
+ */
+ spin_lock_irq(&spu->register_lock);
+ spu_int_mask_set(spu, 0, 0ul);
+ spu_int_mask_set(spu, 1, 0ul);
+ spu_int_mask_set(spu, 2, 0ul);
+ spu_int_stat_clear(spu, 0, ~0ul);
+ spu_int_stat_clear(spu, 1, ~0ul);
+ spu_int_stat_clear(spu, 2, ~0ul);
+ spin_unlock_irq(&spu->register_lock);
+}
+
+static inline void restore_mfc_queues(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+ int i;
+
+ /* Restore, Step 50:
+ * If MFC_Cntl[Se]!=0 then restore
+ * MFC command queues.
+ */
+ if ((csa->priv2.mfc_control_RW & MFC_CNTL_DMA_QUEUES_EMPTY_MASK) == 0) {
+ for (i = 0; i < 8; i++) {
+ out_be64(&priv2->puq[i].mfc_cq_data0_RW,
+ csa->priv2.puq[i].mfc_cq_data0_RW);
+ out_be64(&priv2->puq[i].mfc_cq_data1_RW,
+ csa->priv2.puq[i].mfc_cq_data1_RW);
+ out_be64(&priv2->puq[i].mfc_cq_data2_RW,
+ csa->priv2.puq[i].mfc_cq_data2_RW);
+ out_be64(&priv2->puq[i].mfc_cq_data3_RW,
+ csa->priv2.puq[i].mfc_cq_data3_RW);
+ }
+ for (i = 0; i < 16; i++) {
+ out_be64(&priv2->spuq[i].mfc_cq_data0_RW,
+ csa->priv2.spuq[i].mfc_cq_data0_RW);
+ out_be64(&priv2->spuq[i].mfc_cq_data1_RW,
+ csa->priv2.spuq[i].mfc_cq_data1_RW);
+ out_be64(&priv2->spuq[i].mfc_cq_data2_RW,
+ csa->priv2.spuq[i].mfc_cq_data2_RW);
+ out_be64(&priv2->spuq[i].mfc_cq_data3_RW,
+ csa->priv2.spuq[i].mfc_cq_data3_RW);
+ }
+ }
+ eieio();
+}
+
+static inline void restore_ppu_querymask(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+
+ /* Restore, Step 51:
+ * Restore the PPU_QueryMask register from CSA.
+ */
+ out_be32(&prob->dma_querymask_RW, csa->prob.dma_querymask_RW);
+ eieio();
+}
+
+static inline void restore_ppu_querytype(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+
+ /* Restore, Step 52:
+ * Restore the PPU_QueryType register from CSA.
+ */
+ out_be32(&prob->dma_querytype_RW, csa->prob.dma_querytype_RW);
+ eieio();
+}
+
+static inline void restore_mfc_csr_tsq(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Restore, Step 53:
+ * Restore the MFC_CSR_TSQ register from CSA.
+ */
+ out_be64(&priv2->spu_tag_status_query_RW,
+ csa->priv2.spu_tag_status_query_RW);
+ eieio();
+}
+
+static inline void restore_mfc_csr_cmd(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Restore, Step 54:
+ * Restore the MFC_CSR_CMD1 and MFC_CSR_CMD2
+ * registers from CSA.
+ */
+ out_be64(&priv2->spu_cmd_buf1_RW, csa->priv2.spu_cmd_buf1_RW);
+ out_be64(&priv2->spu_cmd_buf2_RW, csa->priv2.spu_cmd_buf2_RW);
+ eieio();
+}
+
+static inline void restore_mfc_csr_ato(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Restore, Step 55:
+ * Restore the MFC_CSR_ATO register from CSA.
+ */
+ out_be64(&priv2->spu_atomic_status_RW, csa->priv2.spu_atomic_status_RW);
+}
+
+static inline void restore_mfc_tclass_id(struct spu_state *csa, struct spu *spu)
+{
+ /* Restore, Step 56:
+ * Restore the MFC_TCLASS_ID register from CSA.
+ */
+ spu_mfc_tclass_id_set(spu, csa->priv1.mfc_tclass_id_RW);
+ eieio();
+}
+
+static inline void set_llr_event(struct spu_state *csa, struct spu *spu)
+{
+ u64 ch0_cnt, ch0_data;
+ u64 ch1_data;
+
+ /* Restore, Step 57:
+ * Set the Lock Line Reservation Lost Event by:
+ * 1. OR CSA.SPU_Event_Status with bit 21 (Lr) set to 1.
+ * 2. If CSA.SPU_Channel_0_Count=0 and
+ * CSA.SPU_Wr_Event_Mask[Lr]=1 and
+ * CSA.SPU_Event_Status[Lr]=0 then set
+ * CSA.SPU_Event_Status_Count=1.
+ */
+ ch0_cnt = csa->spu_chnlcnt_RW[0];
+ ch0_data = csa->spu_chnldata_RW[0];
+ ch1_data = csa->spu_chnldata_RW[1];
+ csa->spu_chnldata_RW[0] |= MFC_LLR_LOST_EVENT;
+ if ((ch0_cnt == 0) && !(ch0_data & MFC_LLR_LOST_EVENT) &&
+ (ch1_data & MFC_LLR_LOST_EVENT)) {
+ csa->spu_chnlcnt_RW[0] = 1;
+ }
+}
+
+static inline void restore_decr_wrapped(struct spu_state *csa, struct spu *spu)
+{
+ /* Restore, Step 58:
+ * If the status of the CSA software decrementer
+ * "wrapped" flag is set, OR in a '1' to
+ * CSA.SPU_Event_Status[Tm].
+ */
+ if (csa->lscsa->decr_status.slot[0] == 1) {
+ csa->spu_chnldata_RW[0] |= 0x20;
+ }
+ if ((csa->lscsa->decr_status.slot[0] == 1) &&
+ (csa->spu_chnlcnt_RW[0] == 0 &&
+ ((csa->spu_chnldata_RW[2] & 0x20) == 0x0) &&
+ ((csa->spu_chnldata_RW[0] & 0x20) != 0x1))) {
+ csa->spu_chnlcnt_RW[0] = 1;
+ }
+}
+
+static inline void restore_ch_part1(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+ u64 idx, ch_indices[7] = { 0UL, 1UL, 3UL, 4UL, 24UL, 25UL, 27UL };
+ int i;
+
+ /* Restore, Step 59:
+ * Restore the following CH: [0,1,3,4,24,25,27]
+ */
+ for (i = 0; i < 7; i++) {
+ idx = ch_indices[i];
+ out_be64(&priv2->spu_chnlcntptr_RW, idx);
+ eieio();
+ out_be64(&priv2->spu_chnldata_RW, csa->spu_chnldata_RW[idx]);
+ out_be64(&priv2->spu_chnlcnt_RW, csa->spu_chnlcnt_RW[idx]);
+ eieio();
+ }
+}
+
+static inline void restore_ch_part2(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+ u64 ch_indices[3] = { 9UL, 21UL, 23UL };
+ u64 ch_counts[3] = { 1UL, 16UL, 1UL };
+ u64 idx;
+ int i;
+
+ /* Restore, Step 60:
+ * Restore the following CH: [9,21,23].
+ */
+ ch_counts[0] = 1UL;
+ ch_counts[1] = csa->spu_chnlcnt_RW[21];
+ ch_counts[2] = 1UL;
+ for (i = 0; i < 3; i++) {
+ idx = ch_indices[i];
+ out_be64(&priv2->spu_chnlcntptr_RW, idx);
+ eieio();
+ out_be64(&priv2->spu_chnlcnt_RW, ch_counts[i]);
+ eieio();
+ }
+}
+
+static inline void restore_spu_lslr(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Restore, Step 61:
+ * Restore the SPU_LSLR register from CSA.
+ */
+ out_be64(&priv2->spu_lslr_RW, csa->priv2.spu_lslr_RW);
+ eieio();
+}
+
+static inline void restore_spu_cfg(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Restore, Step 62:
+ * Restore the SPU_Cfg register from CSA.
+ */
+ out_be64(&priv2->spu_cfg_RW, csa->priv2.spu_cfg_RW);
+ eieio();
+}
+
+static inline void restore_pm_trace(struct spu_state *csa, struct spu *spu)
+{
+ /* Restore, Step 63:
+ * Restore PM_Trace_Tag_Wait_Mask from CSA.
+ * Not performed by this implementation.
+ */
+}
+
+static inline void restore_spu_npc(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+
+ /* Restore, Step 64:
+ * Restore SPU_NPC from CSA.
+ */
+ out_be32(&prob->spu_npc_RW, csa->prob.spu_npc_RW);
+ eieio();
+}
+
+static inline void restore_spu_mb(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+ int i;
+
+ /* Restore, Step 65:
+ * Restore MFC_RdSPU_MB from CSA.
+ */
+ out_be64(&priv2->spu_chnlcntptr_RW, 29UL);
+ eieio();
+ out_be64(&priv2->spu_chnlcnt_RW, csa->spu_chnlcnt_RW[29]);
+ for (i = 0; i < 4; i++) {
+ out_be64(&priv2->spu_chnldata_RW, csa->spu_mailbox_data[i]);
+ }
+ eieio();
+}
+
+static inline void check_ppu_mb_stat(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+ u32 dummy = 0;
+
+ /* Restore, Step 66:
+ * If CSA.MB_Stat[P]=0 (mailbox empty) then
+ * read from the PPU_MB register.
+ */
+ if ((csa->prob.mb_stat_R & 0xFF) == 0) {
+ dummy = in_be32(&prob->pu_mb_R);
+ eieio();
+ }
+}
+
+static inline void check_ppuint_mb_stat(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+ u64 dummy = 0UL;
+
+ /* Restore, Step 66:
+ * If CSA.MB_Stat[I]=0 (mailbox empty) then
+ * read from the PPUINT_MB register.
+ */
+ if ((csa->prob.mb_stat_R & 0xFF0000) == 0) {
+ dummy = in_be64(&priv2->puint_mb_R);
+ eieio();
+ spu_int_stat_clear(spu, 2, CLASS2_ENABLE_MAILBOX_INTR);
+ eieio();
+ }
+}
+
+static inline void restore_mfc_slbs(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+ int i;
+
+ /* Restore, Step 68:
+ * If MFC_SR1[R]='1', restore SLBs from CSA.
+ */
+ if (csa->priv1.mfc_sr1_RW & MFC_STATE1_RELOCATE_MASK) {
+ for (i = 0; i < 8; i++) {
+ out_be64(&priv2->slb_index_W, i);
+ eieio();
+ out_be64(&priv2->slb_esid_RW, csa->slb_esid_RW[i]);
+ out_be64(&priv2->slb_vsid_RW, csa->slb_vsid_RW[i]);
+ eieio();
+ }
+ out_be64(&priv2->slb_index_W, csa->priv2.slb_index_W);
+ eieio();
+ }
+}
+
+static inline void restore_mfc_sr1(struct spu_state *csa, struct spu *spu)
+{
+ /* Restore, Step 69:
+ * Restore the MFC_SR1 register from CSA.
+ */
+ spu_mfc_sr1_set(spu, csa->priv1.mfc_sr1_RW);
+ eieio();
+}
+
+static inline void restore_other_spu_access(struct spu_state *csa,
+ struct spu *spu)
+{
+ /* Restore, Step 70:
+ * Restore other SPU mappings to this SPU. TBD.
+ */
+}
+
+static inline void restore_spu_runcntl(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_problem __iomem *prob = spu->problem;
+
+ /* Restore, Step 71:
+ * If CSA.SPU_Status[R]=1 then write
+ * SPU_RunCntl[R0R1]='01'.
+ */
+ if (csa->prob.spu_status_R & SPU_STATUS_RUNNING) {
+ out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE);
+ eieio();
+ }
+}
+
+static inline void restore_mfc_cntl(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ /* Restore, Step 72:
+ * Restore the MFC_CNTL register for the CSA.
+ */
+ out_be64(&priv2->mfc_control_RW, csa->priv2.mfc_control_RW);
+ eieio();
+}
+
+static inline void enable_user_access(struct spu_state *csa, struct spu *spu)
+{
+ /* Restore, Step 73:
+ * Enable user-space access (if provided) to this
+ * SPU by mapping the virtual pages assigned to
+ * the SPU memory-mapped I/O (MMIO) for problem
+ * state. TBD.
+ */
+}
+
+static inline void reset_switch_active(struct spu_state *csa, struct spu *spu)
+{
+ /* Restore, Step 74:
+ * Reset the "context switch active" flag.
+ */
+ clear_bit(SPU_CONTEXT_SWITCH_ACTIVE, &spu->flags);
+ mb();
+}
+
+static inline void reenable_interrupts(struct spu_state *csa, struct spu *spu)
+{
+ /* Restore, Step 75:
+ * Re-enable SPU interrupts.
+ */
+ spin_lock_irq(&spu->register_lock);
+ spu_int_mask_set(spu, 0, csa->priv1.int_mask_class0_RW);
+ spu_int_mask_set(spu, 1, csa->priv1.int_mask_class1_RW);
+ spu_int_mask_set(spu, 2, csa->priv1.int_mask_class2_RW);
+ spin_unlock_irq(&spu->register_lock);
+}
+
+static int quiece_spu(struct spu_state *prev, struct spu *spu)
+{
+ /*
+ * Combined steps 2-18 of SPU context save sequence, which
+ * quiesce the SPU state (disable SPU execution, MFC command
+ * queues, decrementer, SPU interrupts, etc.).
+ *
+ * Returns 0 on success.
+ * 2 if failed step 2.
+ * 6 if failed step 6.
+ */
+
+ if (check_spu_isolate(prev, spu)) { /* Step 2. */
+ return 2;
+ }
+ disable_interrupts(prev, spu); /* Step 3. */
+ set_watchdog_timer(prev, spu); /* Step 4. */
+ inhibit_user_access(prev, spu); /* Step 5. */
+ if (check_spu_isolate(prev, spu)) { /* Step 6. */
+ return 6;
+ }
+ set_switch_pending(prev, spu); /* Step 7. */
+ save_mfc_cntl(prev, spu); /* Step 8. */
+ save_spu_runcntl(prev, spu); /* Step 9. */
+ save_mfc_sr1(prev, spu); /* Step 10. */
+ save_spu_status(prev, spu); /* Step 11. */
+ save_mfc_decr(prev, spu); /* Step 12. */
+ halt_mfc_decr(prev, spu); /* Step 13. */
+ save_timebase(prev, spu); /* Step 14. */
+ remove_other_spu_access(prev, spu); /* Step 15. */
+ do_mfc_mssync(prev, spu); /* Step 16. */
+ issue_mfc_tlbie(prev, spu); /* Step 17. */
+ handle_pending_interrupts(prev, spu); /* Step 18. */
+
+ return 0;
+}
+
+static void save_csa(struct spu_state *prev, struct spu *spu)
+{
+ /*
+ * Combine steps 19-44 of SPU context save sequence, which
+ * save regions of the privileged & problem state areas.
+ */
+
+ save_mfc_queues(prev, spu); /* Step 19. */
+ save_ppu_querymask(prev, spu); /* Step 20. */
+ save_ppu_querytype(prev, spu); /* Step 21. */
+ save_mfc_csr_tsq(prev, spu); /* Step 22. */
+ save_mfc_csr_cmd(prev, spu); /* Step 23. */
+ save_mfc_csr_ato(prev, spu); /* Step 24. */
+ save_mfc_tclass_id(prev, spu); /* Step 25. */
+ set_mfc_tclass_id(prev, spu); /* Step 26. */
+ purge_mfc_queue(prev, spu); /* Step 27. */
+ wait_purge_complete(prev, spu); /* Step 28. */
+ save_mfc_slbs(prev, spu); /* Step 29. */
+ setup_mfc_sr1(prev, spu); /* Step 30. */
+ save_spu_npc(prev, spu); /* Step 31. */
+ save_spu_privcntl(prev, spu); /* Step 32. */
+ reset_spu_privcntl(prev, spu); /* Step 33. */
+ save_spu_lslr(prev, spu); /* Step 34. */
+ reset_spu_lslr(prev, spu); /* Step 35. */
+ save_spu_cfg(prev, spu); /* Step 36. */
+ save_pm_trace(prev, spu); /* Step 37. */
+ save_mfc_rag(prev, spu); /* Step 38. */
+ save_ppu_mb_stat(prev, spu); /* Step 39. */
+ save_ppu_mb(prev, spu); /* Step 40. */
+ save_ppuint_mb(prev, spu); /* Step 41. */
+ save_ch_part1(prev, spu); /* Step 42. */
+ save_spu_mb(prev, spu); /* Step 43. */
+ save_mfc_cmd(prev, spu); /* Step 44. */
+ reset_ch(prev, spu); /* Step 45. */
+}
+
+static void save_lscsa(struct spu_state *prev, struct spu *spu)
+{
+ /*
+ * Perform steps 46-57 of SPU context save sequence,
+ * which save regions of the local store and register
+ * file.
+ */
+
+ resume_mfc_queue(prev, spu); /* Step 46. */
+ setup_mfc_slbs(prev, spu); /* Step 47. */
+ set_switch_active(prev, spu); /* Step 48. */
+ enable_interrupts(prev, spu); /* Step 49. */
+ save_ls_16kb(prev, spu); /* Step 50. */
+ set_spu_npc(prev, spu); /* Step 51. */
+ set_signot1(prev, spu); /* Step 52. */
+ set_signot2(prev, spu); /* Step 53. */
+ send_save_code(prev, spu); /* Step 54. */
+ set_ppu_querymask(prev, spu); /* Step 55. */
+ wait_tag_complete(prev, spu); /* Step 56. */
+ wait_spu_stopped(prev, spu); /* Step 57. */
+}
+
+static void harvest(struct spu_state *prev, struct spu *spu)
+{
+ /*
+ * Perform steps 2-25 of SPU context restore sequence,
+ * which resets an SPU either after a failed save, or
+ * when using SPU for first time.
+ */
+
+ disable_interrupts(prev, spu); /* Step 2. */
+ inhibit_user_access(prev, spu); /* Step 3. */
+ terminate_spu_app(prev, spu); /* Step 4. */
+ set_switch_pending(prev, spu); /* Step 5. */
+ remove_other_spu_access(prev, spu); /* Step 6. */
+ suspend_mfc(prev, spu); /* Step 7. */
+ wait_suspend_mfc_complete(prev, spu); /* Step 8. */
+ if (!suspend_spe(prev, spu)) /* Step 9. */
+ clear_spu_status(prev, spu); /* Step 10. */
+ do_mfc_mssync(prev, spu); /* Step 11. */
+ issue_mfc_tlbie(prev, spu); /* Step 12. */
+ handle_pending_interrupts(prev, spu); /* Step 13. */
+ purge_mfc_queue(prev, spu); /* Step 14. */
+ wait_purge_complete(prev, spu); /* Step 15. */
+ reset_spu_privcntl(prev, spu); /* Step 16. */
+ reset_spu_lslr(prev, spu); /* Step 17. */
+ setup_mfc_sr1(prev, spu); /* Step 18. */
+ invalidate_slbs(prev, spu); /* Step 19. */
+ reset_ch_part1(prev, spu); /* Step 20. */
+ reset_ch_part2(prev, spu); /* Step 21. */
+ enable_interrupts(prev, spu); /* Step 22. */
+ set_switch_active(prev, spu); /* Step 23. */
+ set_mfc_tclass_id(prev, spu); /* Step 24. */
+ resume_mfc_queue(prev, spu); /* Step 25. */
+}
+
+static void restore_lscsa(struct spu_state *next, struct spu *spu)
+{
+ /*
+ * Perform steps 26-40 of SPU context restore sequence,
+ * which restores regions of the local store and register
+ * file.
+ */
+
+ set_watchdog_timer(next, spu); /* Step 26. */
+ setup_spu_status_part1(next, spu); /* Step 27. */
+ setup_spu_status_part2(next, spu); /* Step 28. */
+ restore_mfc_rag(next, spu); /* Step 29. */
+ setup_mfc_slbs(next, spu); /* Step 30. */
+ set_spu_npc(next, spu); /* Step 31. */
+ set_signot1(next, spu); /* Step 32. */
+ set_signot2(next, spu); /* Step 33. */
+ setup_decr(next, spu); /* Step 34. */
+ setup_ppu_mb(next, spu); /* Step 35. */
+ setup_ppuint_mb(next, spu); /* Step 36. */
+ send_restore_code(next, spu); /* Step 37. */
+ set_ppu_querymask(next, spu); /* Step 38. */
+ wait_tag_complete(next, spu); /* Step 39. */
+ wait_spu_stopped(next, spu); /* Step 40. */
+}
+
+static void restore_csa(struct spu_state *next, struct spu *spu)
+{
+ /*
+ * Combine steps 41-76 of SPU context restore sequence, which
+ * restore regions of the privileged & problem state areas.
+ */
+
+ restore_spu_privcntl(next, spu); /* Step 41. */
+ restore_status_part1(next, spu); /* Step 42. */
+ restore_status_part2(next, spu); /* Step 43. */
+ restore_ls_16kb(next, spu); /* Step 44. */
+ wait_tag_complete(next, spu); /* Step 45. */
+ suspend_mfc(next, spu); /* Step 46. */
+ wait_suspend_mfc_complete(next, spu); /* Step 47. */
+ issue_mfc_tlbie(next, spu); /* Step 48. */
+ clear_interrupts(next, spu); /* Step 49. */
+ restore_mfc_queues(next, spu); /* Step 50. */
+ restore_ppu_querymask(next, spu); /* Step 51. */
+ restore_ppu_querytype(next, spu); /* Step 52. */
+ restore_mfc_csr_tsq(next, spu); /* Step 53. */
+ restore_mfc_csr_cmd(next, spu); /* Step 54. */
+ restore_mfc_csr_ato(next, spu); /* Step 55. */
+ restore_mfc_tclass_id(next, spu); /* Step 56. */
+ set_llr_event(next, spu); /* Step 57. */
+ restore_decr_wrapped(next, spu); /* Step 58. */
+ restore_ch_part1(next, spu); /* Step 59. */
+ restore_ch_part2(next, spu); /* Step 60. */
+ restore_spu_lslr(next, spu); /* Step 61. */
+ restore_spu_cfg(next, spu); /* Step 62. */
+ restore_pm_trace(next, spu); /* Step 63. */
+ restore_spu_npc(next, spu); /* Step 64. */
+ restore_spu_mb(next, spu); /* Step 65. */
+ check_ppu_mb_stat(next, spu); /* Step 66. */
+ check_ppuint_mb_stat(next, spu); /* Step 67. */
+ restore_mfc_slbs(next, spu); /* Step 68. */
+ restore_mfc_sr1(next, spu); /* Step 69. */
+ restore_other_spu_access(next, spu); /* Step 70. */
+ restore_spu_runcntl(next, spu); /* Step 71. */
+ restore_mfc_cntl(next, spu); /* Step 72. */
+ enable_user_access(next, spu); /* Step 73. */
+ reset_switch_active(next, spu); /* Step 74. */
+ reenable_interrupts(next, spu); /* Step 75. */
+}
+
+static int __do_spu_save(struct spu_state *prev, struct spu *spu)
+{
+ int rc;
+
+ /*
+ * SPU context save can be broken into three phases:
+ *
+ * (a) quiesce [steps 2-16].
+ * (b) save of CSA, performed by PPE [steps 17-42]
+ * (c) save of LSCSA, mostly performed by SPU [steps 43-52].
+ *
+ * Returns 0 on success.
+ * 2,6 if failed to quiece SPU
+ * 53 if SPU-side of save failed.
+ */
+
+ rc = quiece_spu(prev, spu); /* Steps 2-16. */
+ switch (rc) {
+ default:
+ case 2:
+ case 6:
+ harvest(prev, spu);
+ return rc;
+ break;
+ case 0:
+ break;
+ }
+ save_csa(prev, spu); /* Steps 17-43. */
+ save_lscsa(prev, spu); /* Steps 44-53. */
+ return check_save_status(prev, spu); /* Step 54. */
+}
+
+static int __do_spu_restore(struct spu_state *next, struct spu *spu)
+{
+ int rc;
+
+ /*
+ * SPU context restore can be broken into three phases:
+ *
+ * (a) harvest (or reset) SPU [steps 2-24].
+ * (b) restore LSCSA [steps 25-40], mostly performed by SPU.
+ * (c) restore CSA [steps 41-76], performed by PPE.
+ *
+ * The 'harvest' step is not performed here, but rather
+ * as needed below.
+ */
+
+ restore_lscsa(next, spu); /* Steps 24-39. */
+ rc = check_restore_status(next, spu); /* Step 40. */
+ switch (rc) {
+ default:
+ /* Failed. Return now. */
+ return rc;
+ break;
+ case 0:
+ /* Fall through to next step. */
+ break;
+ }
+ restore_csa(next, spu);
+
+ return 0;
+}
+
+/**
+ * spu_save - SPU context save, with locking.
+ * @prev: pointer to SPU context save area, to be saved.
+ * @spu: pointer to SPU iomem structure.
+ *
+ * Acquire locks, perform the save operation then return.
+ */
+int spu_save(struct spu_state *prev, struct spu *spu)
+{
+ int rc;
+
+ acquire_spu_lock(spu); /* Step 1. */
+ rc = __do_spu_save(prev, spu); /* Steps 2-53. */
+ release_spu_lock(spu);
+ if (rc) {
+ panic("%s failed on SPU[%d], rc=%d.\n",
+ __func__, spu->number, rc);
+ }
+ return rc;
+}
+
+/**
+ * spu_restore - SPU context restore, with harvest and locking.
+ * @new: pointer to SPU context save area, to be restored.
+ * @spu: pointer to SPU iomem structure.
+ *
+ * Perform harvest + restore, as we may not be coming
+ * from a previous succesful save operation, and the
+ * hardware state is unknown.
+ */
+int spu_restore(struct spu_state *new, struct spu *spu)
+{
+ int rc;
+
+ acquire_spu_lock(spu);
+ harvest(NULL, spu);
+ spu->stop_code = 0;
+ spu->dar = 0;
+ spu->dsisr = 0;
+ spu->slb_replace = 0;
+ spu->class_0_pending = 0;
+ rc = __do_spu_restore(new, spu);
+ release_spu_lock(spu);
+ if (rc) {
+ panic("%s failed on SPU[%d] rc=%d.\n",
+ __func__, spu->number, rc);
+ }
+ return rc;
+}
+
+/**
+ * spu_harvest - SPU harvest (reset) operation
+ * @spu: pointer to SPU iomem structure.
+ *
+ * Perform SPU harvest (reset) operation.
+ */
+void spu_harvest(struct spu *spu)
+{
+ acquire_spu_lock(spu);
+ harvest(NULL, spu);
+ release_spu_lock(spu);
+}
+
+static void init_prob(struct spu_state *csa)
+{
+ csa->spu_chnlcnt_RW[9] = 1;
+ csa->spu_chnlcnt_RW[21] = 16;
+ csa->spu_chnlcnt_RW[23] = 1;
+ csa->spu_chnlcnt_RW[28] = 1;
+ csa->spu_chnlcnt_RW[30] = 1;
+ csa->prob.spu_runcntl_RW = SPU_RUNCNTL_STOP;
+}
+
+static void init_priv1(struct spu_state *csa)
+{
+ /* Enable decode, relocate, tlbie response, master runcntl. */
+ csa->priv1.mfc_sr1_RW = MFC_STATE1_LOCAL_STORAGE_DECODE_MASK |
+ MFC_STATE1_MASTER_RUN_CONTROL_MASK |
+ MFC_STATE1_PROBLEM_STATE_MASK |
+ MFC_STATE1_RELOCATE_MASK | MFC_STATE1_BUS_TLBIE_MASK;
+
+ /* Set storage description. */
+ csa->priv1.mfc_sdr_RW = mfspr(SPRN_SDR1);
+
+ /* Enable OS-specific set of interrupts. */
+ csa->priv1.int_mask_class0_RW = CLASS0_ENABLE_DMA_ALIGNMENT_INTR |
+ CLASS0_ENABLE_INVALID_DMA_COMMAND_INTR |
+ CLASS0_ENABLE_SPU_ERROR_INTR;
+ csa->priv1.int_mask_class1_RW = CLASS1_ENABLE_SEGMENT_FAULT_INTR |
+ CLASS1_ENABLE_STORAGE_FAULT_INTR;
+ csa->priv1.int_mask_class2_RW = CLASS2_ENABLE_SPU_STOP_INTR |
+ CLASS2_ENABLE_SPU_HALT_INTR;
+}
+
+static void init_priv2(struct spu_state *csa)
+{
+ csa->priv2.spu_lslr_RW = LS_ADDR_MASK;
+ csa->priv2.mfc_control_RW = MFC_CNTL_RESUME_DMA_QUEUE |
+ MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION |
+ MFC_CNTL_DMA_QUEUES_EMPTY_MASK;
+}
+
+/**
+ * spu_alloc_csa - allocate and initialize an SPU context save area.
+ *
+ * Allocate and initialize the contents of an SPU context save area.
+ * This includes enabling address translation, interrupt masks, etc.,
+ * as appropriate for the given OS environment.
+ *
+ * Note that storage for the 'lscsa' is allocated separately,
+ * as it is by far the largest of the context save regions,
+ * and may need to be pinned or otherwise specially aligned.
+ */
+void spu_init_csa(struct spu_state *csa)
+{
+ struct spu_lscsa *lscsa;
+ unsigned char *p;
+
+ if (!csa)
+ return;
+ memset(csa, 0, sizeof(struct spu_state));
+
+ lscsa = vmalloc(sizeof(struct spu_lscsa));
+ if (!lscsa)
+ return;
+
+ memset(lscsa, 0, sizeof(struct spu_lscsa));
+ csa->lscsa = lscsa;
+ csa->register_lock = SPIN_LOCK_UNLOCKED;
+
+ /* Set LS pages reserved to allow for user-space mapping. */
+ for (p = lscsa->ls; p < lscsa->ls + LS_SIZE; p += PAGE_SIZE)
+ SetPageReserved(vmalloc_to_page(p));
+
+ init_prob(csa);
+ init_priv1(csa);
+ init_priv2(csa);
+}
+
+void spu_fini_csa(struct spu_state *csa)
+{
+ /* Clear reserved bit before vfree. */
+ unsigned char *p;
+ for (p = csa->lscsa->ls; p < csa->lscsa->ls + LS_SIZE; p += PAGE_SIZE)
+ ClearPageReserved(vmalloc_to_page(p));
+
+ vfree(csa->lscsa);
+}
diff --git a/arch/powerpc/platforms/cell/spufs/syscalls.c b/arch/powerpc/platforms/cell/spufs/syscalls.c
new file mode 100644
index 000000000000..d549aa7ebea6
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spufs/syscalls.c
@@ -0,0 +1,101 @@
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/module.h>
+#include <linux/mount.h>
+#include <linux/namei.h>
+
+#include <asm/uaccess.h>
+
+#include "spufs.h"
+
+/**
+ * sys_spu_run - run code loaded into an SPU
+ *
+ * @unpc: next program counter for the SPU
+ * @ustatus: status of the SPU
+ *
+ * This system call transfers the control of execution of a
+ * user space thread to an SPU. It will return when the
+ * SPU has finished executing or when it hits an error
+ * condition and it will be interrupted if a signal needs
+ * to be delivered to a handler in user space.
+ *
+ * The next program counter is set to the passed value
+ * before the SPU starts fetching code and the user space
+ * pointer gets updated with the new value when returning
+ * from kernel space.
+ *
+ * The status value returned from spu_run reflects the
+ * value of the spu_status register after the SPU has stopped.
+ *
+ */
+long do_spu_run(struct file *filp, __u32 __user *unpc, __u32 __user *ustatus)
+{
+ long ret;
+ struct spufs_inode_info *i;
+ u32 npc, status;
+
+ ret = -EFAULT;
+ if (get_user(npc, unpc) || get_user(status, ustatus))
+ goto out;
+
+ /* check if this file was created by spu_create */
+ ret = -EINVAL;
+ if (filp->f_op != &spufs_context_fops)
+ goto out;
+
+ i = SPUFS_I(filp->f_dentry->d_inode);
+ ret = spufs_run_spu(filp, i->i_ctx, &npc, &status);
+
+ if (put_user(npc, unpc) || put_user(status, ustatus))
+ ret = -EFAULT;
+out:
+ return ret;
+}
+
+#ifndef MODULE
+asmlinkage long sys_spu_run(int fd, __u32 __user *unpc, __u32 __user *ustatus)
+{
+ int fput_needed;
+ struct file *filp;
+ long ret;
+
+ ret = -EBADF;
+ filp = fget_light(fd, &fput_needed);
+ if (filp) {
+ ret = do_spu_run(filp, unpc, ustatus);
+ fput_light(filp, fput_needed);
+ }
+
+ return ret;
+}
+#endif
+
+asmlinkage long sys_spu_create(const char __user *pathname,
+ unsigned int flags, mode_t mode)
+{
+ char *tmp;
+ int ret;
+
+ tmp = getname(pathname);
+ ret = PTR_ERR(tmp);
+ if (!IS_ERR(tmp)) {
+ struct nameidata nd;
+
+ ret = path_lookup(tmp, LOOKUP_PARENT|
+ LOOKUP_OPEN|LOOKUP_CREATE, &nd);
+ if (!ret) {
+ ret = spufs_create_thread(&nd, flags, mode);
+ path_release(&nd);
+ }
+ putname(tmp);
+ }
+
+ return ret;
+}
+
+struct spufs_calls spufs_calls = {
+ .create_thread = sys_spu_create,
+ .spu_run = do_spu_run,
+ .owner = THIS_MODULE,
+};
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index dda5f2c72c25..4ec8ba737e7d 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -49,7 +49,6 @@
#include <asm/hydra.h>
#include <asm/sections.h>
#include <asm/time.h>
-#include <asm/btext.h>
#include <asm/i8259.h>
#include <asm/mpic.h>
#include <asm/rtas.h>
@@ -58,7 +57,6 @@
#include "chrp.h"
void rtas_indicator_progress(char *, unsigned short);
-void btext_progress(char *, unsigned short);
int _chrp_type;
EXPORT_SYMBOL(_chrp_type);
@@ -264,11 +262,6 @@ void __init chrp_setup_arch(void)
ppc_md.set_rtc_time = rtas_set_rtc_time;
}
-#ifdef CONFIG_BOOTX_TEXT
- if (ppc_md.progress == NULL && boot_text_mapped)
- ppc_md.progress = btext_progress;
-#endif
-
#ifdef CONFIG_BLK_DEV_INITRD
/* this is fine for chrp */
initrd_below_start_ok = 1;
@@ -522,12 +515,3 @@ void __init chrp_init(void)
smp_ops = &chrp_smp_ops;
#endif /* CONFIG_SMP */
}
-
-#ifdef CONFIG_BOOTX_TEXT
-void
-btext_progress(char *s, unsigned short hex)
-{
- btext_drawstring(s);
- btext_drawstring("\n");
-}
-#endif /* CONFIG_BOOTX_TEXT */
diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c
index a58daa153686..42e978e4897a 100644
--- a/arch/powerpc/platforms/iseries/irq.c
+++ b/arch/powerpc/platforms/iseries/irq.c
@@ -35,161 +35,138 @@
#include <linux/irq.h>
#include <linux/spinlock.h>
+#include <asm/paca.h>
#include <asm/iseries/hv_types.h>
#include <asm/iseries/hv_lp_event.h>
#include <asm/iseries/hv_call_xm.h>
+#include <asm/iseries/it_lp_queue.h>
#include "irq.h"
#include "call_pci.h"
-static long Pci_Interrupt_Count;
-static long Pci_Event_Count;
-
-enum XmPciLpEvent_Subtype {
- XmPciLpEvent_BusCreated = 0, // PHB has been created
- XmPciLpEvent_BusError = 1, // PHB has failed
- XmPciLpEvent_BusFailed = 2, // Msg to Secondary, Primary failed bus
- XmPciLpEvent_NodeFailed = 4, // Multi-adapter bridge has failed
- XmPciLpEvent_NodeRecovered = 5, // Multi-adapter bridge has recovered
- XmPciLpEvent_BusRecovered = 12, // PHB has been recovered
- XmPciLpEvent_UnQuiesceBus = 18, // Secondary bus unqiescing
- XmPciLpEvent_BridgeError = 21, // Bridge Error
- XmPciLpEvent_SlotInterrupt = 22 // Slot interrupt
-};
-
-struct XmPciLpEvent_BusInterrupt {
- HvBusNumber busNumber;
- HvSubBusNumber subBusNumber;
-};
+#if defined(CONFIG_SMP)
+extern void iSeries_smp_message_recv(struct pt_regs *);
+#endif
-struct XmPciLpEvent_NodeInterrupt {
- HvBusNumber busNumber;
- HvSubBusNumber subBusNumber;
- HvAgentId deviceId;
+enum pci_event_type {
+ pe_bus_created = 0, /* PHB has been created */
+ pe_bus_error = 1, /* PHB has failed */
+ pe_bus_failed = 2, /* Msg to Secondary, Primary failed bus */
+ pe_node_failed = 4, /* Multi-adapter bridge has failed */
+ pe_node_recovered = 5, /* Multi-adapter bridge has recovered */
+ pe_bus_recovered = 12, /* PHB has been recovered */
+ pe_unquiese_bus = 18, /* Secondary bus unqiescing */
+ pe_bridge_error = 21, /* Bridge Error */
+ pe_slot_interrupt = 22 /* Slot interrupt */
};
-struct XmPciLpEvent {
- struct HvLpEvent hvLpEvent;
-
+struct pci_event {
+ struct HvLpEvent event;
union {
- u64 alignData; // Align on an 8-byte boundary
-
+ u64 __align; /* Align on an 8-byte boundary */
struct {
u32 fisr;
- HvBusNumber busNumber;
- HvSubBusNumber subBusNumber;
- HvAgentId deviceId;
- } slotInterrupt;
-
- struct XmPciLpEvent_BusInterrupt busFailed;
- struct XmPciLpEvent_BusInterrupt busRecovered;
- struct XmPciLpEvent_BusInterrupt busCreated;
-
- struct XmPciLpEvent_NodeInterrupt nodeFailed;
- struct XmPciLpEvent_NodeInterrupt nodeRecovered;
-
- } eventData;
-
+ HvBusNumber bus_number;
+ HvSubBusNumber sub_bus_number;
+ HvAgentId dev_id;
+ } slot;
+ struct {
+ HvBusNumber bus_number;
+ HvSubBusNumber sub_bus_number;
+ } bus;
+ struct {
+ HvBusNumber bus_number;
+ HvSubBusNumber sub_bus_number;
+ HvAgentId dev_id;
+ } node;
+ } data;
};
-static void intReceived(struct XmPciLpEvent *eventParm,
- struct pt_regs *regsParm)
+static DEFINE_SPINLOCK(pending_irqs_lock);
+static int num_pending_irqs;
+static int pending_irqs[NR_IRQS];
+
+static void int_received(struct pci_event *event, struct pt_regs *regs)
{
int irq;
-#ifdef CONFIG_IRQSTACKS
- struct thread_info *curtp, *irqtp;
-#endif
- ++Pci_Interrupt_Count;
-
- switch (eventParm->hvLpEvent.xSubtype) {
- case XmPciLpEvent_SlotInterrupt:
- irq = eventParm->hvLpEvent.xCorrelationToken;
- /* Dispatch the interrupt handlers for this irq */
-#ifdef CONFIG_IRQSTACKS
- /* Switch to the irq stack to handle this */
- curtp = current_thread_info();
- irqtp = hardirq_ctx[smp_processor_id()];
- if (curtp != irqtp) {
- irqtp->task = curtp->task;
- irqtp->flags = 0;
- call___do_IRQ(irq, regsParm, irqtp);
- irqtp->task = NULL;
- if (irqtp->flags)
- set_bits(irqtp->flags, &curtp->flags);
- } else
-#endif
- __do_IRQ(irq, regsParm);
- HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber,
- eventParm->eventData.slotInterrupt.subBusNumber,
- eventParm->eventData.slotInterrupt.deviceId);
+ switch (event->event.xSubtype) {
+ case pe_slot_interrupt:
+ irq = event->event.xCorrelationToken;
+ if (irq < NR_IRQS) {
+ spin_lock(&pending_irqs_lock);
+ pending_irqs[irq]++;
+ num_pending_irqs++;
+ spin_unlock(&pending_irqs_lock);
+ } else {
+ printk(KERN_WARNING "int_received: bad irq number %d\n",
+ irq);
+ HvCallPci_eoi(event->data.slot.bus_number,
+ event->data.slot.sub_bus_number,
+ event->data.slot.dev_id);
+ }
break;
/* Ignore error recovery events for now */
- case XmPciLpEvent_BusCreated:
- printk(KERN_INFO "intReceived: system bus %d created\n",
- eventParm->eventData.busCreated.busNumber);
+ case pe_bus_created:
+ printk(KERN_INFO "int_received: system bus %d created\n",
+ event->data.bus.bus_number);
break;
- case XmPciLpEvent_BusError:
- case XmPciLpEvent_BusFailed:
- printk(KERN_INFO "intReceived: system bus %d failed\n",
- eventParm->eventData.busFailed.busNumber);
+ case pe_bus_error:
+ case pe_bus_failed:
+ printk(KERN_INFO "int_received: system bus %d failed\n",
+ event->data.bus.bus_number);
break;
- case XmPciLpEvent_BusRecovered:
- case XmPciLpEvent_UnQuiesceBus:
- printk(KERN_INFO "intReceived: system bus %d recovered\n",
- eventParm->eventData.busRecovered.busNumber);
+ case pe_bus_recovered:
+ case pe_unquiese_bus:
+ printk(KERN_INFO "int_received: system bus %d recovered\n",
+ event->data.bus.bus_number);
break;
- case XmPciLpEvent_NodeFailed:
- case XmPciLpEvent_BridgeError:
+ case pe_node_failed:
+ case pe_bridge_error:
printk(KERN_INFO
- "intReceived: multi-adapter bridge %d/%d/%d failed\n",
- eventParm->eventData.nodeFailed.busNumber,
- eventParm->eventData.nodeFailed.subBusNumber,
- eventParm->eventData.nodeFailed.deviceId);
+ "int_received: multi-adapter bridge %d/%d/%d failed\n",
+ event->data.node.bus_number,
+ event->data.node.sub_bus_number,
+ event->data.node.dev_id);
break;
- case XmPciLpEvent_NodeRecovered:
+ case pe_node_recovered:
printk(KERN_INFO
- "intReceived: multi-adapter bridge %d/%d/%d recovered\n",
- eventParm->eventData.nodeRecovered.busNumber,
- eventParm->eventData.nodeRecovered.subBusNumber,
- eventParm->eventData.nodeRecovered.deviceId);
+ "int_received: multi-adapter bridge %d/%d/%d recovered\n",
+ event->data.node.bus_number,
+ event->data.node.sub_bus_number,
+ event->data.node.dev_id);
break;
default:
printk(KERN_ERR
- "intReceived: unrecognized event subtype 0x%x\n",
- eventParm->hvLpEvent.xSubtype);
+ "int_received: unrecognized event subtype 0x%x\n",
+ event->event.xSubtype);
break;
}
}
-static void XmPciLpEvent_handler(struct HvLpEvent *eventParm,
- struct pt_regs *regsParm)
+static void pci_event_handler(struct HvLpEvent *event, struct pt_regs *regs)
{
-#ifdef CONFIG_PCI
- ++Pci_Event_Count;
-
- if (eventParm && (eventParm->xType == HvLpEvent_Type_PciIo)) {
- switch (eventParm->xFlags.xFunction) {
+ if (event && (event->xType == HvLpEvent_Type_PciIo)) {
+ switch (event->xFlags.xFunction) {
case HvLpEvent_Function_Int:
- intReceived((struct XmPciLpEvent *)eventParm, regsParm);
+ int_received((struct pci_event *)event, regs);
break;
case HvLpEvent_Function_Ack:
printk(KERN_ERR
- "XmPciLpEvent_handler: unexpected ack received\n");
+ "pci_event_handler: unexpected ack received\n");
break;
default:
printk(KERN_ERR
- "XmPciLpEvent_handler: unexpected event function %d\n",
- (int)eventParm->xFlags.xFunction);
+ "pci_event_handler: unexpected event function %d\n",
+ (int)event->xFlags.xFunction);
break;
}
- } else if (eventParm)
+ } else if (event)
printk(KERN_ERR
- "XmPciLpEvent_handler: Unrecognized PCI event type 0x%x\n",
- (int)eventParm->xType);
+ "pci_event_handler: Unrecognized PCI event type 0x%x\n",
+ (int)event->xType);
else
- printk(KERN_ERR "XmPciLpEvent_handler: NULL event received\n");
-#endif
+ printk(KERN_ERR "pci_event_handler: NULL event received\n");
}
/*
@@ -199,20 +176,21 @@ static void XmPciLpEvent_handler(struct HvLpEvent *eventParm,
void __init iSeries_init_IRQ(void)
{
/* Register PCI event handler and open an event path */
- int xRc;
-
- xRc = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo,
- &XmPciLpEvent_handler);
- if (xRc == 0) {
- xRc = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0);
- if (xRc != 0)
- printk(KERN_ERR "iSeries_init_IRQ: open event path "
- "failed with rc 0x%x\n", xRc);
+ int ret;
+
+ ret = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo,
+ &pci_event_handler);
+ if (ret == 0) {
+ ret = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0);
+ if (ret != 0)
+ printk(KERN_ERR "iseries_init_IRQ: open event path "
+ "failed with rc 0x%x\n", ret);
} else
- printk(KERN_ERR "iSeries_init_IRQ: register handler "
- "failed with rc 0x%x\n", xRc);
+ printk(KERN_ERR "iseries_init_IRQ: register handler "
+ "failed with rc 0x%x\n", ret);
}
+#define REAL_IRQ_TO_SUBBUS(irq) (((irq) >> 14) & 0xff)
#define REAL_IRQ_TO_BUS(irq) ((((irq) >> 6) & 0xff) + 1)
#define REAL_IRQ_TO_IDSEL(irq) ((((irq) >> 3) & 7) + 1)
#define REAL_IRQ_TO_FUNC(irq) ((irq) & 7)
@@ -221,40 +199,40 @@ void __init iSeries_init_IRQ(void)
* This will be called by device drivers (via enable_IRQ)
* to enable INTA in the bridge interrupt status register.
*/
-static void iSeries_enable_IRQ(unsigned int irq)
+static void iseries_enable_IRQ(unsigned int irq)
{
- u32 bus, deviceId, function, mask;
- const u32 subBus = 0;
+ u32 bus, dev_id, function, mask;
+ const u32 sub_bus = 0;
unsigned int rirq = virt_irq_to_real_map[irq];
/* The IRQ has already been locked by the caller */
bus = REAL_IRQ_TO_BUS(rirq);
function = REAL_IRQ_TO_FUNC(rirq);
- deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function;
+ dev_id = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function;
/* Unmask secondary INTA */
mask = 0x80000000;
- HvCallPci_unmaskInterrupts(bus, subBus, deviceId, mask);
+ HvCallPci_unmaskInterrupts(bus, sub_bus, dev_id, mask);
}
-/* This is called by iSeries_activate_IRQs */
-static unsigned int iSeries_startup_IRQ(unsigned int irq)
+/* This is called by iseries_activate_IRQs */
+static unsigned int iseries_startup_IRQ(unsigned int irq)
{
- u32 bus, deviceId, function, mask;
- const u32 subBus = 0;
+ u32 bus, dev_id, function, mask;
+ const u32 sub_bus = 0;
unsigned int rirq = virt_irq_to_real_map[irq];
bus = REAL_IRQ_TO_BUS(rirq);
function = REAL_IRQ_TO_FUNC(rirq);
- deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function;
+ dev_id = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function;
/* Link the IRQ number to the bridge */
- HvCallXm_connectBusUnit(bus, subBus, deviceId, irq);
+ HvCallXm_connectBusUnit(bus, sub_bus, dev_id, irq);
/* Unmask bridge interrupts in the FISR */
mask = 0x01010000 << function;
- HvCallPci_unmaskFisr(bus, subBus, deviceId, mask);
- iSeries_enable_IRQ(irq);
+ HvCallPci_unmaskFisr(bus, sub_bus, dev_id, mask);
+ iseries_enable_IRQ(irq);
return 0;
}
@@ -279,78 +257,115 @@ void __init iSeries_activate_IRQs()
}
/* this is not called anywhere currently */
-static void iSeries_shutdown_IRQ(unsigned int irq)
+static void iseries_shutdown_IRQ(unsigned int irq)
{
- u32 bus, deviceId, function, mask;
- const u32 subBus = 0;
+ u32 bus, dev_id, function, mask;
+ const u32 sub_bus = 0;
unsigned int rirq = virt_irq_to_real_map[irq];
/* irq should be locked by the caller */
bus = REAL_IRQ_TO_BUS(rirq);
function = REAL_IRQ_TO_FUNC(rirq);
- deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function;
+ dev_id = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function;
/* Invalidate the IRQ number in the bridge */
- HvCallXm_connectBusUnit(bus, subBus, deviceId, 0);
+ HvCallXm_connectBusUnit(bus, sub_bus, dev_id, 0);
/* Mask bridge interrupts in the FISR */
mask = 0x01010000 << function;
- HvCallPci_maskFisr(bus, subBus, deviceId, mask);
+ HvCallPci_maskFisr(bus, sub_bus, dev_id, mask);
}
/*
* This will be called by device drivers (via disable_IRQ)
* to disable INTA in the bridge interrupt status register.
*/
-static void iSeries_disable_IRQ(unsigned int irq)
+static void iseries_disable_IRQ(unsigned int irq)
{
- u32 bus, deviceId, function, mask;
- const u32 subBus = 0;
+ u32 bus, dev_id, function, mask;
+ const u32 sub_bus = 0;
unsigned int rirq = virt_irq_to_real_map[irq];
/* The IRQ has already been locked by the caller */
bus = REAL_IRQ_TO_BUS(rirq);
function = REAL_IRQ_TO_FUNC(rirq);
- deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function;
+ dev_id = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function;
/* Mask secondary INTA */
mask = 0x80000000;
- HvCallPci_maskInterrupts(bus, subBus, deviceId, mask);
+ HvCallPci_maskInterrupts(bus, sub_bus, dev_id, mask);
}
-/*
- * This does nothing because there is not enough information
- * provided to do the EOI HvCall. This is done by XmPciLpEvent.c
- */
-static void iSeries_end_IRQ(unsigned int irq)
+static void iseries_end_IRQ(unsigned int irq)
{
+ unsigned int rirq = virt_irq_to_real_map[irq];
+
+ HvCallPci_eoi(REAL_IRQ_TO_BUS(rirq), REAL_IRQ_TO_SUBBUS(rirq),
+ (REAL_IRQ_TO_IDSEL(rirq) << 4) + REAL_IRQ_TO_FUNC(rirq));
}
static hw_irq_controller iSeries_IRQ_handler = {
.typename = "iSeries irq controller",
- .startup = iSeries_startup_IRQ,
- .shutdown = iSeries_shutdown_IRQ,
- .enable = iSeries_enable_IRQ,
- .disable = iSeries_disable_IRQ,
- .end = iSeries_end_IRQ
+ .startup = iseries_startup_IRQ,
+ .shutdown = iseries_shutdown_IRQ,
+ .enable = iseries_enable_IRQ,
+ .disable = iseries_disable_IRQ,
+ .end = iseries_end_IRQ
};
/*
* This is called out of iSeries_scan_slot to allocate an IRQ for an EADS slot
* It calculates the irq value for the slot.
- * Note that subBusNumber is always 0 (at the moment at least).
+ * Note that sub_bus is always 0 (at the moment at least).
*/
-int __init iSeries_allocate_IRQ(HvBusNumber busNumber,
- HvSubBusNumber subBusNumber, HvAgentId deviceId)
+int __init iSeries_allocate_IRQ(HvBusNumber bus,
+ HvSubBusNumber sub_bus, HvAgentId dev_id)
{
int virtirq;
unsigned int realirq;
- u8 idsel = (deviceId >> 4);
- u8 function = deviceId & 7;
+ u8 idsel = (dev_id >> 4);
+ u8 function = dev_id & 7;
- realirq = ((busNumber - 1) << 6) + ((idsel - 1) << 3) + function;
+ realirq = (((((sub_bus << 8) + (bus - 1)) << 3) + (idsel - 1)) << 3)
+ + function;
virtirq = virt_irq_create_mapping(realirq);
irq_desc[virtirq].handler = &iSeries_IRQ_handler;
return virtirq;
}
+
+/*
+ * Get the next pending IRQ.
+ */
+int iSeries_get_irq(struct pt_regs *regs)
+{
+ struct paca_struct *lpaca;
+ /* -2 means ignore this interrupt */
+ int irq = -2;
+
+ lpaca = get_paca();
+#ifdef CONFIG_SMP
+ if (lpaca->lppaca.int_dword.fields.ipi_cnt) {
+ lpaca->lppaca.int_dword.fields.ipi_cnt = 0;
+ iSeries_smp_message_recv(regs);
+ }
+#endif /* CONFIG_SMP */
+ if (hvlpevent_is_pending())
+ process_hvlpevents(regs);
+
+ if (num_pending_irqs) {
+ spin_lock(&pending_irqs_lock);
+ for (irq = 0; irq < NR_IRQS; irq++) {
+ if (pending_irqs[irq]) {
+ pending_irqs[irq]--;
+ num_pending_irqs--;
+ break;
+ }
+ }
+ spin_unlock(&pending_irqs_lock);
+ if (irq >= NR_IRQS)
+ irq = -2;
+ }
+
+ return irq;
+}
diff --git a/arch/powerpc/platforms/iseries/irq.h b/arch/powerpc/platforms/iseries/irq.h
index 5f643f16ecc0..b9c801ba5a47 100644
--- a/arch/powerpc/platforms/iseries/irq.h
+++ b/arch/powerpc/platforms/iseries/irq.h
@@ -4,5 +4,6 @@
extern void iSeries_init_IRQ(void);
extern int iSeries_allocate_IRQ(HvBusNumber, HvSubBusNumber, HvAgentId);
extern void iSeries_activate_IRQs(void);
+extern int iSeries_get_irq(struct pt_regs *);
#endif /* _ISERIES_IRQ_H */
diff --git a/arch/powerpc/platforms/iseries/lpardata.c b/arch/powerpc/platforms/iseries/lpardata.c
index bb8c91537f35..ea72385aaf0a 100644
--- a/arch/powerpc/platforms/iseries/lpardata.c
+++ b/arch/powerpc/platforms/iseries/lpardata.c
@@ -225,3 +225,10 @@ struct ItVpdAreas itVpdAreas = {
0,0
}
};
+
+struct ItLpRegSave iseries_reg_save[] = {
+ [0 ... (NR_CPUS-1)] = {
+ .xDesc = 0xd397d9e2, /* "LpRS" */
+ .xSize = sizeof(struct ItLpRegSave),
+ },
+};
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index da26639190db..ad5ef80500ce 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -571,16 +571,6 @@ static void iSeries_show_cpuinfo(struct seq_file *m)
/*
* Document me.
- * and Implement me.
- */
-static int iSeries_get_irq(struct pt_regs *regs)
-{
- /* -2 means ignore this interrupt */
- return -2;
-}
-
-/*
- * Document me.
*/
static void iSeries_restart(char *cmd)
{
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 7ece8983a105..dd73e38bfb7d 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -51,6 +51,7 @@
#include <asm/pgtable.h>
#include <asm/bitops.h>
#include <asm/io.h>
+#include <asm/kexec.h>
#include <asm/pci-bridge.h>
#include <asm/iommu.h>
#include <asm/machdep.h>
@@ -191,24 +192,10 @@ static void __init maple_init_early(void)
*/
hpte_init_native();
- /* Find the serial port */
- generic_find_legacy_serial_ports(&physport, &default_speed);
-
- DBG("phys port addr: %lx\n", (long)physport);
-
- if (physport) {
- void *comport;
- /* Map the uart for udbg. */
- comport = (void *)ioremap(physport, 16);
- udbg_init_uart(comport, default_speed);
-
- DBG("Hello World !\n");
- }
-
/* Setup interrupt mapping options */
ppc64_interrupt_controller = IC_OPEN_PIC;
- iommu_init_early_u3();
+ iommu_init_early_dart();
DBG(" <- maple_init_early\n");
}
@@ -270,7 +257,7 @@ static int __init maple_probe(int platform)
* occupies having to be broken up so the DART itself is not
* part of the cacheable linar mapping
*/
- alloc_u3_dart_table();
+ alloc_dart_table();
return 1;
}
@@ -292,4 +279,9 @@ struct machdep_calls __initdata maple_md = {
.calibrate_decr = generic_calibrate_decr,
.progress = maple_progress,
.idle_loop = native_idle,
+#ifdef CONFIG_KEXEC
+ .machine_kexec = default_machine_kexec,
+ .machine_kexec_prepare = default_machine_kexec_prepare,
+ .machine_crash_shutdown = default_machine_crash_shutdown,
+#endif
};
diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile
index c9df44fcf571..78093d7f97af 100644
--- a/arch/powerpc/platforms/powermac/Makefile
+++ b/arch/powerpc/platforms/powermac/Makefile
@@ -1,9 +1,14 @@
+CFLAGS_bootx_init.o += -fPIC
+
obj-y += pic.o setup.o time.o feature.o pci.o \
- sleep.o low_i2c.o cache.o
+ sleep.o low_i2c.o cache.o pfunc_core.o \
+ pfunc_base.o
obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o
obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq_32.o
obj-$(CONFIG_CPU_FREQ_PMAC64) += cpufreq_64.o
obj-$(CONFIG_NVRAM) += nvram.o
# ppc64 pmac doesn't define CONFIG_NVRAM but needs nvram stuff
obj-$(CONFIG_PPC64) += nvram.o
+obj-$(CONFIG_PPC32) += bootx_init.o
obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_PPC_MERGE) += udbg_scc.o udbg_adb.o
diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c
new file mode 100644
index 000000000000..fa8b4d7b5ded
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/bootx_init.c
@@ -0,0 +1,547 @@
+/*
+ * Early boot support code for BootX bootloader
+ *
+ * Copyright (C) 2005 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/version.h>
+#include <asm/sections.h>
+#include <asm/prom.h>
+#include <asm/page.h>
+#include <asm/bootx.h>
+#include <asm/bootinfo.h>
+#include <asm/btext.h>
+#include <asm/io.h>
+
+#undef DEBUG
+#define SET_BOOT_BAT
+
+#ifdef DEBUG
+#define DBG(fmt...) do { bootx_printf(fmt); } while(0)
+#else
+#define DBG(fmt...) do { } while(0)
+#endif
+
+extern void __start(unsigned long r3, unsigned long r4, unsigned long r5);
+
+static unsigned long __initdata bootx_dt_strbase;
+static unsigned long __initdata bootx_dt_strend;
+static unsigned long __initdata bootx_node_chosen;
+static boot_infos_t * __initdata bootx_info;
+static char __initdata bootx_disp_path[256];
+
+/* Is boot-info compatible ? */
+#define BOOT_INFO_IS_COMPATIBLE(bi) \
+ ((bi)->compatible_version <= BOOT_INFO_VERSION)
+#define BOOT_INFO_IS_V2_COMPATIBLE(bi) ((bi)->version >= 2)
+#define BOOT_INFO_IS_V4_COMPATIBLE(bi) ((bi)->version >= 4)
+
+#ifdef CONFIG_BOOTX_TEXT
+static void __init bootx_printf(const char *format, ...)
+{
+ const char *p, *q, *s;
+ va_list args;
+ unsigned long v;
+
+ va_start(args, format);
+ for (p = format; *p != 0; p = q) {
+ for (q = p; *q != 0 && *q != '\n' && *q != '%'; ++q)
+ ;
+ if (q > p)
+ btext_drawtext(p, q - p);
+ if (*q == 0)
+ break;
+ if (*q == '\n') {
+ ++q;
+ btext_flushline();
+ btext_drawstring("\r\n");
+ btext_flushline();
+ continue;
+ }
+ ++q;
+ if (*q == 0)
+ break;
+ switch (*q) {
+ case 's':
+ ++q;
+ s = va_arg(args, const char *);
+ if (s == NULL)
+ s = "<NULL>";
+ btext_drawstring(s);
+ break;
+ case 'x':
+ ++q;
+ v = va_arg(args, unsigned long);
+ btext_drawhex(v);
+ break;
+ }
+ }
+}
+#else /* CONFIG_BOOTX_TEXT */
+static void __init bootx_printf(const char *format, ...) {}
+#endif /* CONFIG_BOOTX_TEXT */
+
+static void * __init bootx_early_getprop(unsigned long base,
+ unsigned long node,
+ char *prop)
+{
+ struct bootx_dt_node *np = (struct bootx_dt_node *)(base + node);
+ u32 *ppp = &np->properties;
+
+ while(*ppp) {
+ struct bootx_dt_prop *pp =
+ (struct bootx_dt_prop *)(base + *ppp);
+
+ if (strcmp((char *)((unsigned long)pp->name + base),
+ prop) == 0) {
+ return (void *)((unsigned long)pp->value + base);
+ }
+ ppp = &pp->next;
+ }
+ return NULL;
+}
+
+#define dt_push_token(token, mem) \
+ do { \
+ *(mem) = _ALIGN_UP(*(mem),4); \
+ *((u32 *)*(mem)) = token; \
+ *(mem) += 4; \
+ } while(0)
+
+static unsigned long __init bootx_dt_find_string(char *str)
+{
+ char *s, *os;
+
+ s = os = (char *)bootx_dt_strbase;
+ s += 4;
+ while (s < (char *)bootx_dt_strend) {
+ if (strcmp(s, str) == 0)
+ return s - os;
+ s += strlen(s) + 1;
+ }
+ return 0;
+}
+
+static void __init bootx_dt_add_prop(char *name, void *data, int size,
+ unsigned long *mem_end)
+{
+ unsigned long soff = bootx_dt_find_string(name);
+ if (data == NULL)
+ size = 0;
+ if (soff == 0) {
+ bootx_printf("WARNING: Can't find string index for <%s>\n",
+ name);
+ return;
+ }
+ if (size > 0x20000) {
+ bootx_printf("WARNING: ignoring large property ");
+ bootx_printf("%s length 0x%x\n", name, size);
+ return;
+ }
+ dt_push_token(OF_DT_PROP, mem_end);
+ dt_push_token(size, mem_end);
+ dt_push_token(soff, mem_end);
+
+ /* push property content */
+ if (size && data) {
+ memcpy((void *)*mem_end, data, size);
+ *mem_end = _ALIGN_UP(*mem_end + size, 4);
+ }
+}
+
+static void __init bootx_add_chosen_props(unsigned long base,
+ unsigned long *mem_end)
+{
+ u32 val = _MACH_Pmac;
+
+ bootx_dt_add_prop("linux,platform", &val, 4, mem_end);
+
+ if (bootx_info->kernelParamsOffset) {
+ char *args = (char *)((unsigned long)bootx_info) +
+ bootx_info->kernelParamsOffset;
+ bootx_dt_add_prop("bootargs", args, strlen(args) + 1, mem_end);
+ }
+ if (bootx_info->ramDisk) {
+ val = ((unsigned long)bootx_info) + bootx_info->ramDisk;
+ bootx_dt_add_prop("linux,initrd-start", &val, 4, mem_end);
+ val += bootx_info->ramDiskSize;
+ bootx_dt_add_prop("linux,initrd-end", &val, 4, mem_end);
+ }
+ if (strlen(bootx_disp_path))
+ bootx_dt_add_prop("linux,stdout-path", bootx_disp_path,
+ strlen(bootx_disp_path) + 1, mem_end);
+}
+
+static void __init bootx_add_display_props(unsigned long base,
+ unsigned long *mem_end)
+{
+ bootx_dt_add_prop("linux,boot-display", NULL, 0, mem_end);
+ bootx_dt_add_prop("linux,opened", NULL, 0, mem_end);
+}
+
+static void __init bootx_dt_add_string(char *s, unsigned long *mem_end)
+{
+ unsigned int l = strlen(s) + 1;
+ memcpy((void *)*mem_end, s, l);
+ bootx_dt_strend = *mem_end = *mem_end + l;
+}
+
+static void __init bootx_scan_dt_build_strings(unsigned long base,
+ unsigned long node,
+ unsigned long *mem_end)
+{
+ struct bootx_dt_node *np = (struct bootx_dt_node *)(base + node);
+ u32 *cpp, *ppp = &np->properties;
+ unsigned long soff;
+ char *namep;
+
+ /* Keep refs to known nodes */
+ namep = np->full_name ? (char *)(base + np->full_name) : NULL;
+ if (namep == NULL) {
+ bootx_printf("Node without a full name !\n");
+ namep = "";
+ }
+ DBG("* strings: %s\n", namep);
+
+ if (!strcmp(namep, "/chosen")) {
+ DBG(" detected /chosen ! adding properties names !\n");
+ bootx_dt_add_string("linux,platform", mem_end);
+ bootx_dt_add_string("linux,stdout-path", mem_end);
+ bootx_dt_add_string("linux,initrd-start", mem_end);
+ bootx_dt_add_string("linux,initrd-end", mem_end);
+ bootx_dt_add_string("bootargs", mem_end);
+ bootx_node_chosen = node;
+ }
+ if (node == bootx_info->dispDeviceRegEntryOffset) {
+ DBG(" detected display ! adding properties names !\n");
+ bootx_dt_add_string("linux,boot-display", mem_end);
+ bootx_dt_add_string("linux,opened", mem_end);
+ strncpy(bootx_disp_path, namep, 255);
+ }
+
+ /* get and store all property names */
+ while (*ppp) {
+ struct bootx_dt_prop *pp =
+ (struct bootx_dt_prop *)(base + *ppp);
+
+ namep = pp->name ? (char *)(base + pp->name) : NULL;
+ if (namep == NULL || strcmp(namep, "name") == 0)
+ goto next;
+ /* get/create string entry */
+ soff = bootx_dt_find_string(namep);
+ if (soff == 0)
+ bootx_dt_add_string(namep, mem_end);
+ next:
+ ppp = &pp->next;
+ }
+
+ /* do all our children */
+ cpp = &np->child;
+ while(*cpp) {
+ np = (struct bootx_dt_node *)(base + *cpp);
+ bootx_scan_dt_build_strings(base, *cpp, mem_end);
+ cpp = &np->sibling;
+ }
+}
+
+static void __init bootx_scan_dt_build_struct(unsigned long base,
+ unsigned long node,
+ unsigned long *mem_end)
+{
+ struct bootx_dt_node *np = (struct bootx_dt_node *)(base + node);
+ u32 *cpp, *ppp = &np->properties;
+ char *namep, *p, *ep, *lp;
+ int l;
+
+ dt_push_token(OF_DT_BEGIN_NODE, mem_end);
+
+ /* get the node's full name */
+ namep = np->full_name ? (char *)(base + np->full_name) : NULL;
+ if (namep == NULL)
+ namep = "";
+ l = strlen(namep);
+
+ DBG("* struct: %s\n", namep);
+
+ /* Fixup an Apple bug where they have bogus \0 chars in the
+ * middle of the path in some properties, and extract
+ * the unit name (everything after the last '/').
+ */
+ memcpy((void *)*mem_end, namep, l + 1);
+ namep = (char *)*mem_end;
+ for (lp = p = namep, ep = namep + l; p < ep; p++) {
+ if (*p == '/')
+ lp = namep;
+ else if (*p != 0)
+ *lp++ = *p;
+ }
+ *lp = 0;
+ *mem_end = _ALIGN_UP((unsigned long)lp + 1, 4);
+
+ /* get and store all properties */
+ while (*ppp) {
+ struct bootx_dt_prop *pp =
+ (struct bootx_dt_prop *)(base + *ppp);
+
+ namep = pp->name ? (char *)(base + pp->name) : NULL;
+ /* Skip "name" */
+ if (namep == NULL || !strcmp(namep, "name"))
+ goto next;
+ /* Skip "bootargs" in /chosen too as we replace it */
+ if (node == bootx_node_chosen && !strcmp(namep, "bootargs"))
+ goto next;
+
+ /* push property head */
+ bootx_dt_add_prop(namep,
+ pp->value ? (void *)(base + pp->value): NULL,
+ pp->length, mem_end);
+ next:
+ ppp = &pp->next;
+ }
+
+ if (node == bootx_node_chosen)
+ bootx_add_chosen_props(base, mem_end);
+ if (node == bootx_info->dispDeviceRegEntryOffset)
+ bootx_add_display_props(base, mem_end);
+
+ /* do all our children */
+ cpp = &np->child;
+ while(*cpp) {
+ np = (struct bootx_dt_node *)(base + *cpp);
+ bootx_scan_dt_build_struct(base, *cpp, mem_end);
+ cpp = &np->sibling;
+ }
+
+ dt_push_token(OF_DT_END_NODE, mem_end);
+}
+
+static unsigned long __init bootx_flatten_dt(unsigned long start)
+{
+ boot_infos_t *bi = bootx_info;
+ unsigned long mem_start, mem_end;
+ struct boot_param_header *hdr;
+ unsigned long base;
+ u64 *rsvmap;
+
+ /* Start using memory after the big blob passed by BootX, get
+ * some space for the header
+ */
+ mem_start = mem_end = _ALIGN_UP(((unsigned long)bi) + start, 4);
+ DBG("Boot params header at: %x\n", mem_start);
+ hdr = (struct boot_param_header *)mem_start;
+ mem_end += sizeof(struct boot_param_header);
+ rsvmap = (u64 *)(_ALIGN_UP(mem_end, 8));
+ hdr->off_mem_rsvmap = ((unsigned long)rsvmap) - mem_start;
+ mem_end = ((unsigned long)rsvmap) + 8 * sizeof(u64);
+
+ /* Get base of tree */
+ base = ((unsigned long)bi) + bi->deviceTreeOffset;
+
+ /* Build string array */
+ DBG("Building string array at: %x\n", mem_end);
+ DBG("Device Tree Base=%x\n", base);
+ bootx_dt_strbase = mem_end;
+ mem_end += 4;
+ bootx_dt_strend = mem_end;
+ bootx_scan_dt_build_strings(base, 4, &mem_end);
+ hdr->off_dt_strings = bootx_dt_strbase - mem_start;
+ hdr->dt_strings_size = bootx_dt_strend - bootx_dt_strbase;
+
+ /* Build structure */
+ mem_end = _ALIGN(mem_end, 16);
+ DBG("Building device tree structure at: %x\n", mem_end);
+ hdr->off_dt_struct = mem_end - mem_start;
+ bootx_scan_dt_build_struct(base, 4, &mem_end);
+ dt_push_token(OF_DT_END, &mem_end);
+
+ /* Finish header */
+ hdr->boot_cpuid_phys = 0;
+ hdr->magic = OF_DT_HEADER;
+ hdr->totalsize = mem_end - mem_start;
+ hdr->version = OF_DT_VERSION;
+ /* Version 16 is not backward compatible */
+ hdr->last_comp_version = 0x10;
+
+ /* Reserve the whole thing and copy the reserve map in, we
+ * also bump mem_reserve_cnt to cause further reservations to
+ * fail since it's too late.
+ */
+ mem_end = _ALIGN(mem_end, PAGE_SIZE);
+ DBG("End of boot params: %x\n", mem_end);
+ rsvmap[0] = mem_start;
+ rsvmap[1] = mem_end;
+ rsvmap[2] = 0;
+ rsvmap[3] = 0;
+
+ return (unsigned long)hdr;
+}
+
+
+#ifdef CONFIG_BOOTX_TEXT
+static void __init btext_welcome(boot_infos_t *bi)
+{
+ unsigned long flags;
+ unsigned long pvr;
+
+ bootx_printf("Welcome to Linux, kernel " UTS_RELEASE "\n");
+ bootx_printf("\nlinked at : 0x%x", KERNELBASE);
+ bootx_printf("\nframe buffer at : 0x%x", bi->dispDeviceBase);
+ bootx_printf(" (phys), 0x%x", bi->logicalDisplayBase);
+ bootx_printf(" (log)");
+ bootx_printf("\nklimit : 0x%x",(unsigned long)klimit);
+ bootx_printf("\nboot_info at : 0x%x", bi);
+ __asm__ __volatile__ ("mfmsr %0" : "=r" (flags));
+ bootx_printf("\nMSR : 0x%x", flags);
+ __asm__ __volatile__ ("mfspr %0, 287" : "=r" (pvr));
+ bootx_printf("\nPVR : 0x%x", pvr);
+ pvr >>= 16;
+ if (pvr > 1) {
+ __asm__ __volatile__ ("mfspr %0, 1008" : "=r" (flags));
+ bootx_printf("\nHID0 : 0x%x", flags);
+ }
+ if (pvr == 8 || pvr == 12 || pvr == 0x800c) {
+ __asm__ __volatile__ ("mfspr %0, 1019" : "=r" (flags));
+ bootx_printf("\nICTC : 0x%x", flags);
+ }
+#ifdef DEBUG
+ bootx_printf("\n\n");
+ bootx_printf("bi->deviceTreeOffset : 0x%x\n",
+ bi->deviceTreeOffset);
+ bootx_printf("bi->deviceTreeSize : 0x%x\n",
+ bi->deviceTreeSize);
+#endif
+ bootx_printf("\n\n");
+}
+#endif /* CONFIG_BOOTX_TEXT */
+
+void __init bootx_init(unsigned long r3, unsigned long r4)
+{
+ boot_infos_t *bi = (boot_infos_t *) r4;
+ unsigned long hdr;
+ unsigned long space;
+ unsigned long ptr, x;
+ char *model;
+ unsigned long offset = reloc_offset();
+
+ reloc_got2(offset);
+
+ bootx_info = bi;
+
+ /* We haven't cleared any bss at this point, make sure
+ * what we need is initialized
+ */
+ bootx_dt_strbase = bootx_dt_strend = 0;
+ bootx_node_chosen = 0;
+ bootx_disp_path[0] = 0;
+
+ if (!BOOT_INFO_IS_V2_COMPATIBLE(bi))
+ bi->logicalDisplayBase = bi->dispDeviceBase;
+
+#ifdef CONFIG_BOOTX_TEXT
+ btext_setup_display(bi->dispDeviceRect[2] - bi->dispDeviceRect[0],
+ bi->dispDeviceRect[3] - bi->dispDeviceRect[1],
+ bi->dispDeviceDepth, bi->dispDeviceRowBytes,
+ (unsigned long)bi->logicalDisplayBase);
+ btext_clearscreen();
+ btext_flushscreen();
+#endif /* CONFIG_BOOTX_TEXT */
+
+ /*
+ * Test if boot-info is compatible. Done only in config
+ * CONFIG_BOOTX_TEXT since there is nothing much we can do
+ * with an incompatible version, except display a message
+ * and eventually hang the processor...
+ *
+ * I'll try to keep enough of boot-info compatible in the
+ * future to always allow display of this message;
+ */
+ if (!BOOT_INFO_IS_COMPATIBLE(bi)) {
+ bootx_printf(" !!! WARNING - Incompatible version"
+ " of BootX !!!\n\n\n");
+ for (;;)
+ ;
+ }
+ if (bi->architecture != BOOT_ARCH_PCI) {
+ bootx_printf(" !!! WARNING - Usupported machine"
+ " architecture !\n");
+ for (;;)
+ ;
+ }
+
+#ifdef CONFIG_BOOTX_TEXT
+ btext_welcome(bi);
+#endif
+ /* New BootX enters kernel with MMU off, i/os are not allowed
+ * here. This hack will have been done by the boostrap anyway.
+ */
+ if (bi->version < 4) {
+ /*
+ * XXX If this is an iMac, turn off the USB controller.
+ */
+ model = (char *) bootx_early_getprop(r4 + bi->deviceTreeOffset,
+ 4, "model");
+ if (model
+ && (strcmp(model, "iMac,1") == 0
+ || strcmp(model, "PowerMac1,1") == 0)) {
+ bootx_printf("iMac,1 detected, shutting down USB \n");
+ out_le32((unsigned *)0x80880008, 1); /* XXX */
+ }
+ }
+
+ /* Get a pointer that points above the device tree, args, ramdisk,
+ * etc... to use for generating the flattened tree
+ */
+ if (bi->version < 5) {
+ space = bi->deviceTreeOffset + bi->deviceTreeSize;
+ if (bi->ramDisk)
+ space = bi->ramDisk + bi->ramDiskSize;
+ } else
+ space = bi->totalParamsSize;
+
+ bootx_printf("Total space used by parameters & ramdisk: %x \n", space);
+
+ /* New BootX will have flushed all TLBs and enters kernel with
+ * MMU switched OFF, so this should not be useful anymore.
+ */
+ if (bi->version < 4) {
+ bootx_printf("Touching pages...\n");
+
+ /*
+ * Touch each page to make sure the PTEs for them
+ * are in the hash table - the aim is to try to avoid
+ * getting DSI exceptions while copying the kernel image.
+ */
+ for (ptr = ((unsigned long) &_stext) & PAGE_MASK;
+ ptr < (unsigned long)bi + space; ptr += PAGE_SIZE)
+ x = *(volatile unsigned long *)ptr;
+ }
+
+ /* Ok, now we need to generate a flattened device-tree to pass
+ * to the kernel
+ */
+ bootx_printf("Preparing boot params...\n");
+
+ hdr = bootx_flatten_dt(space);
+
+#ifdef CONFIG_BOOTX_TEXT
+#ifdef SET_BOOT_BAT
+ bootx_printf("Preparing BAT...\n");
+ btext_prepare_BAT();
+#else
+ btext_unmap();
+#endif
+#endif
+
+ reloc_got2(-offset);
+
+ __start(hdr, KERNELBASE + offset, 0);
+}
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
index 39150342c6f1..a4b50c4109c2 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -28,6 +28,7 @@
#include <asm/cputable.h>
#include <asm/time.h>
#include <asm/smu.h>
+#include <asm/pmac_pfunc.h>
#undef DEBUG
@@ -85,6 +86,10 @@ static u32 *g5_pmode_data;
static int g5_pmode_max;
static int g5_pmode_cur;
+static void (*g5_switch_volt)(int speed_mode);
+static int (*g5_switch_freq)(int speed_mode);
+static int (*g5_query_freq)(void);
+
static DECLARE_MUTEX(g5_switch_mutex);
@@ -92,9 +97,11 @@ static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */
static int g5_fvt_count; /* number of op. points */
static int g5_fvt_cur; /* current op. point */
-/* ----------------- real hardware interface */
+/*
+ * SMU based voltage switching for Neo2 platforms
+ */
-static void g5_switch_volt(int speed_mode)
+static void g5_smu_switch_volt(int speed_mode)
{
struct smu_simple_cmd cmd;
@@ -105,26 +112,57 @@ static void g5_switch_volt(int speed_mode)
wait_for_completion(&comp);
}
-static int g5_switch_freq(int speed_mode)
+/*
+ * Platform function based voltage/vdnap switching for Neo2
+ */
+
+static struct pmf_function *pfunc_set_vdnap0;
+static struct pmf_function *pfunc_vdnap0_complete;
+
+static void g5_vdnap_switch_volt(int speed_mode)
{
- struct cpufreq_freqs freqs;
- int to;
+ struct pmf_args args;
+ u32 slew, done = 0;
+ unsigned long timeout;
- if (g5_pmode_cur == speed_mode)
- return 0;
+ slew = (speed_mode == CPUFREQ_LOW) ? 1 : 0;
+ args.count = 1;
+ args.u[0].p = &slew;
- down(&g5_switch_mutex);
+ pmf_call_one(pfunc_set_vdnap0, &args);
- freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency;
- freqs.new = g5_cpu_freqs[speed_mode].frequency;
- freqs.cpu = 0;
+ /* It's an irq GPIO so we should be able to just block here,
+ * I'll do that later after I've properly tested the IRQ code for
+ * platform functions
+ */
+ timeout = jiffies + HZ/10;
+ while(!time_after(jiffies, timeout)) {
+ args.count = 1;
+ args.u[0].p = &done;
+ pmf_call_one(pfunc_vdnap0_complete, &args);
+ if (done)
+ break;
+ msleep(1);
+ }
+ if (done == 0)
+ printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n");
+}
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+/*
+ * SCOM based frequency switching for 970FX rev3
+ */
+static int g5_scom_switch_freq(int speed_mode)
+{
+ unsigned long flags;
+ int to;
/* If frequency is going up, first ramp up the voltage */
if (speed_mode < g5_pmode_cur)
g5_switch_volt(speed_mode);
+ local_irq_save(flags);
+
/* Clear PCR high */
scom970_write(SCOM_PCR, 0);
/* Clear PCR low */
@@ -147,6 +185,8 @@ static int g5_switch_freq(int speed_mode)
udelay(100);
}
+ local_irq_restore(flags);
+
/* If frequency is going down, last ramp the voltage */
if (speed_mode > g5_pmode_cur)
g5_switch_volt(speed_mode);
@@ -154,14 +194,10 @@ static int g5_switch_freq(int speed_mode)
g5_pmode_cur = speed_mode;
ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul;
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
- up(&g5_switch_mutex);
-
return 0;
}
-static int g5_query_freq(void)
+static int g5_scom_query_freq(void)
{
unsigned long psr = scom970_read(SCOM_PSR);
int i;
@@ -173,7 +209,104 @@ static int g5_query_freq(void)
return i;
}
-/* ----------------- cpufreq bookkeeping */
+/*
+ * Platform function based voltage switching for PowerMac7,2 & 7,3
+ */
+
+static struct pmf_function *pfunc_cpu0_volt_high;
+static struct pmf_function *pfunc_cpu0_volt_low;
+static struct pmf_function *pfunc_cpu1_volt_high;
+static struct pmf_function *pfunc_cpu1_volt_low;
+
+static void g5_pfunc_switch_volt(int speed_mode)
+{
+ if (speed_mode == CPUFREQ_HIGH) {
+ if (pfunc_cpu0_volt_high)
+ pmf_call_one(pfunc_cpu0_volt_high, NULL);
+ if (pfunc_cpu1_volt_high)
+ pmf_call_one(pfunc_cpu1_volt_high, NULL);
+ } else {
+ if (pfunc_cpu0_volt_low)
+ pmf_call_one(pfunc_cpu0_volt_low, NULL);
+ if (pfunc_cpu1_volt_low)
+ pmf_call_one(pfunc_cpu1_volt_low, NULL);
+ }
+ msleep(10); /* should be faster , to fix */
+}
+
+/*
+ * Platform function based frequency switching for PowerMac7,2 & 7,3
+ */
+
+static struct pmf_function *pfunc_cpu_setfreq_high;
+static struct pmf_function *pfunc_cpu_setfreq_low;
+static struct pmf_function *pfunc_cpu_getfreq;
+static struct pmf_function *pfunc_slewing_done;;
+
+static int g5_pfunc_switch_freq(int speed_mode)
+{
+ struct pmf_args args;
+ u32 done = 0;
+ unsigned long timeout;
+
+ /* If frequency is going up, first ramp up the voltage */
+ if (speed_mode < g5_pmode_cur)
+ g5_switch_volt(speed_mode);
+
+ /* Do it */
+ if (speed_mode == CPUFREQ_HIGH)
+ pmf_call_one(pfunc_cpu_setfreq_high, NULL);
+ else
+ pmf_call_one(pfunc_cpu_setfreq_low, NULL);
+
+ /* It's an irq GPIO so we should be able to just block here,
+ * I'll do that later after I've properly tested the IRQ code for
+ * platform functions
+ */
+ timeout = jiffies + HZ/10;
+ while(!time_after(jiffies, timeout)) {
+ args.count = 1;
+ args.u[0].p = &done;
+ pmf_call_one(pfunc_slewing_done, &args);
+ if (done)
+ break;
+ msleep(1);
+ }
+ if (done == 0)
+ printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n");
+
+ /* If frequency is going down, last ramp the voltage */
+ if (speed_mode > g5_pmode_cur)
+ g5_switch_volt(speed_mode);
+
+ g5_pmode_cur = speed_mode;
+ ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul;
+
+ return 0;
+}
+
+static int g5_pfunc_query_freq(void)
+{
+ struct pmf_args args;
+ u32 val = 0;
+
+ args.count = 1;
+ args.u[0].p = &val;
+ pmf_call_one(pfunc_cpu_getfreq, &args);
+ return val ? CPUFREQ_HIGH : CPUFREQ_LOW;
+}
+
+/*
+ * Fake voltage switching for platforms with missing support
+ */
+
+static void g5_dummy_switch_volt(int speed_mode)
+{
+}
+
+/*
+ * Common interface to the cpufreq core
+ */
static int g5_cpufreq_verify(struct cpufreq_policy *policy)
{
@@ -183,13 +316,30 @@ static int g5_cpufreq_verify(struct cpufreq_policy *policy)
static int g5_cpufreq_target(struct cpufreq_policy *policy,
unsigned int target_freq, unsigned int relation)
{
- unsigned int newstate = 0;
+ unsigned int newstate = 0;
+ struct cpufreq_freqs freqs;
+ int rc;
if (cpufreq_frequency_table_target(policy, g5_cpu_freqs,
target_freq, relation, &newstate))
return -EINVAL;
- return g5_switch_freq(newstate);
+ if (g5_pmode_cur == newstate)
+ return 0;
+
+ down(&g5_switch_mutex);
+
+ freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency;
+ freqs.new = g5_cpu_freqs[newstate].frequency;
+ freqs.cpu = 0;
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ rc = g5_switch_freq(newstate);
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ up(&g5_switch_mutex);
+
+ return rc;
}
static unsigned int g5_cpufreq_get_speed(unsigned int cpu)
@@ -205,6 +355,7 @@ static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy)
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
policy->cur = g5_cpu_freqs[g5_query_freq()].frequency;
+ policy->cpus = cpu_possible_map;
cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu);
return cpufreq_frequency_table_cpuinfo(policy,
@@ -224,19 +375,39 @@ static struct cpufreq_driver g5_cpufreq_driver = {
};
-static int __init g5_cpufreq_init(void)
+static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
{
struct device_node *cpunode;
unsigned int psize, ssize;
- struct smu_sdbp_header *shdr;
unsigned long max_freq;
- u32 *valp;
+ char *freq_method, *volt_method;
+ u32 *valp, pvr_hi;
+ int use_volts_vdnap = 0;
+ int use_volts_smu = 0;
int rc = -ENODEV;
- /* Look for CPU and SMU nodes */
- cpunode = of_find_node_by_type(NULL, "cpu");
- if (!cpunode) {
- DBG("No CPU node !\n");
+ /* Check supported platforms */
+ if (machine_is_compatible("PowerMac8,1") ||
+ machine_is_compatible("PowerMac8,2") ||
+ machine_is_compatible("PowerMac9,1"))
+ use_volts_smu = 1;
+ else if (machine_is_compatible("PowerMac11,2"))
+ use_volts_vdnap = 1;
+ else
+ return -ENODEV;
+
+ /* Get first CPU node */
+ for (cpunode = NULL;
+ (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) {
+ u32 *reg =
+ (u32 *)get_property(cpunode, "reg", NULL);
+ if (reg == NULL || (*reg) != 0)
+ continue;
+ if (!strcmp(cpunode->type, "cpu"))
+ break;
+ }
+ if (cpunode == NULL) {
+ printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n");
return -ENODEV;
}
@@ -246,8 +417,9 @@ static int __init g5_cpufreq_init(void)
DBG("No cpu-version property !\n");
goto bail_noprops;
}
- if (((*valp) >> 16) != 0x3c) {
- DBG("Wrong CPU version: %08x\n", *valp);
+ pvr_hi = (*valp) >> 16;
+ if (pvr_hi != 0x3c && pvr_hi != 0x44) {
+ printk(KERN_ERR "cpufreq: Unsupported CPU version\n");
goto bail_noprops;
}
@@ -259,18 +431,50 @@ static int __init g5_cpufreq_init(void)
}
g5_pmode_max = psize / sizeof(u32) - 1;
- /* Look for the FVT table */
- shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
- if (!shdr)
- goto bail_noprops;
- g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1];
- ssize = (shdr->len * sizeof(u32)) - sizeof(struct smu_sdbp_header);
- g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt);
- g5_fvt_cur = 0;
-
- /* Sanity checking */
- if (g5_fvt_count < 1 || g5_pmode_max < 1)
- goto bail_noprops;
+ if (use_volts_smu) {
+ struct smu_sdbp_header *shdr;
+
+ /* Look for the FVT table */
+ shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
+ if (!shdr)
+ goto bail_noprops;
+ g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1];
+ ssize = (shdr->len * sizeof(u32)) -
+ sizeof(struct smu_sdbp_header);
+ g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt);
+ g5_fvt_cur = 0;
+
+ /* Sanity checking */
+ if (g5_fvt_count < 1 || g5_pmode_max < 1)
+ goto bail_noprops;
+
+ g5_switch_volt = g5_smu_switch_volt;
+ volt_method = "SMU";
+ } else if (use_volts_vdnap) {
+ struct device_node *root;
+
+ root = of_find_node_by_path("/");
+ if (root == NULL) {
+ printk(KERN_ERR "cpufreq: Can't find root of "
+ "device tree\n");
+ goto bail_noprops;
+ }
+ pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0");
+ pfunc_vdnap0_complete =
+ pmf_find_function(root, "slewing-done");
+ if (pfunc_set_vdnap0 == NULL ||
+ pfunc_vdnap0_complete == NULL) {
+ printk(KERN_ERR "cpufreq: Can't find required "
+ "platform function\n");
+ goto bail_noprops;
+ }
+
+ g5_switch_volt = g5_vdnap_switch_volt;
+ volt_method = "GPIO";
+ } else {
+ g5_switch_volt = g5_dummy_switch_volt;
+ volt_method = "none";
+ }
/*
* From what I see, clock-frequency is always the maximal frequency.
@@ -286,19 +490,23 @@ static int __init g5_cpufreq_init(void)
g5_cpu_freqs[0].frequency = max_freq;
g5_cpu_freqs[1].frequency = max_freq/2;
- /* Check current frequency */
- g5_pmode_cur = g5_query_freq();
- if (g5_pmode_cur > 1)
- /* We don't support anything but 1:1 and 1:2, fixup ... */
- g5_pmode_cur = 1;
+ /* Set callbacks */
+ g5_switch_freq = g5_scom_switch_freq;
+ g5_query_freq = g5_scom_query_freq;
+ freq_method = "SCOM";
/* Force apply current frequency to make sure everything is in
* sync (voltage is right for example). Firmware may leave us with
* a strange setting ...
*/
- g5_switch_freq(g5_pmode_cur);
+ g5_switch_volt(CPUFREQ_HIGH);
+ msleep(10);
+ g5_pmode_cur = -1;
+ g5_switch_freq(g5_query_freq());
printk(KERN_INFO "Registering G5 CPU frequency driver\n");
+ printk(KERN_INFO "Frequency method: %s, Voltage method: %s\n",
+ freq_method, volt_method);
printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
g5_cpu_freqs[1].frequency/1000,
g5_cpu_freqs[0].frequency/1000,
@@ -317,6 +525,200 @@ static int __init g5_cpufreq_init(void)
return rc;
}
+static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
+{
+ struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL;
+ u8 *eeprom = NULL;
+ u32 *valp;
+ u64 max_freq, min_freq, ih, il;
+ int has_volt = 1, rc = 0;
+
+ /* Get first CPU node */
+ for (cpunode = NULL;
+ (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) {
+ if (!strcmp(cpunode->type, "cpu"))
+ break;
+ }
+ if (cpunode == NULL) {
+ printk(KERN_ERR "cpufreq: Can't find any CPU node\n");
+ return -ENODEV;
+ }
+
+ /* Lookup the cpuid eeprom node */
+ cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0");
+ if (cpuid != NULL)
+ eeprom = (u8 *)get_property(cpuid, "cpuid", NULL);
+ if (eeprom == NULL) {
+ printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n");
+ rc = -ENODEV;
+ goto bail;
+ }
+
+ /* Lookup the i2c hwclock */
+ for (hwclock = NULL;
+ (hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){
+ char *loc = get_property(hwclock, "hwctrl-location", NULL);
+ if (loc == NULL)
+ continue;
+ if (strcmp(loc, "CPU CLOCK"))
+ continue;
+ if (!get_property(hwclock, "platform-get-frequency", NULL))
+ continue;
+ break;
+ }
+ if (hwclock == NULL) {
+ printk(KERN_ERR "cpufreq: Can't find i2c clock chip !\n");
+ rc = -ENODEV;
+ goto bail;
+ }
+
+ DBG("cpufreq: i2c clock chip found: %s\n", hwclock->full_name);
+
+ /* Now get all the platform functions */
+ pfunc_cpu_getfreq =
+ pmf_find_function(hwclock, "get-frequency");
+ pfunc_cpu_setfreq_high =
+ pmf_find_function(hwclock, "set-frequency-high");
+ pfunc_cpu_setfreq_low =
+ pmf_find_function(hwclock, "set-frequency-low");
+ pfunc_slewing_done =
+ pmf_find_function(hwclock, "slewing-done");
+ pfunc_cpu0_volt_high =
+ pmf_find_function(hwclock, "set-voltage-high-0");
+ pfunc_cpu0_volt_low =
+ pmf_find_function(hwclock, "set-voltage-low-0");
+ pfunc_cpu1_volt_high =
+ pmf_find_function(hwclock, "set-voltage-high-1");
+ pfunc_cpu1_volt_low =
+ pmf_find_function(hwclock, "set-voltage-low-1");
+
+ /* Check we have minimum requirements */
+ if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL ||
+ pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) {
+ printk(KERN_ERR "cpufreq: Can't find platform functions !\n");
+ rc = -ENODEV;
+ goto bail;
+ }
+
+ /* Check that we have complete sets */
+ if (pfunc_cpu0_volt_high == NULL || pfunc_cpu0_volt_low == NULL) {
+ pmf_put_function(pfunc_cpu0_volt_high);
+ pmf_put_function(pfunc_cpu0_volt_low);
+ pfunc_cpu0_volt_high = pfunc_cpu0_volt_low = NULL;
+ has_volt = 0;
+ }
+ if (!has_volt ||
+ pfunc_cpu1_volt_high == NULL || pfunc_cpu1_volt_low == NULL) {
+ pmf_put_function(pfunc_cpu1_volt_high);
+ pmf_put_function(pfunc_cpu1_volt_low);
+ pfunc_cpu1_volt_high = pfunc_cpu1_volt_low = NULL;
+ }
+
+ /* Note: The device tree also contains a "platform-set-values"
+ * function for which I haven't quite figured out the usage. It
+ * might have to be called on init and/or wakeup, I'm not too sure
+ * but things seem to work fine without it so far ...
+ */
+
+ /* Get max frequency from device-tree */
+ valp = (u32 *)get_property(cpunode, "clock-frequency", NULL);
+ if (!valp) {
+ printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n");
+ rc = -ENODEV;
+ goto bail;
+ }
+
+ max_freq = (*valp)/1000;
+
+ /* Now calculate reduced frequency by using the cpuid input freq
+ * ratio. This requires 64 bits math unless we are willing to lose
+ * some precision
+ */
+ ih = *((u32 *)(eeprom + 0x10));
+ il = *((u32 *)(eeprom + 0x20));
+ min_freq = 0;
+ if (ih != 0 && il != 0)
+ min_freq = (max_freq * il) / ih;
+
+ /* Sanity check */
+ if (min_freq >= max_freq || min_freq < 1000) {
+ printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n");
+ rc = -ENODEV;
+ goto bail;
+ }
+ g5_cpu_freqs[0].frequency = max_freq;
+ g5_cpu_freqs[1].frequency = min_freq;
+
+ /* Set callbacks */
+ g5_switch_volt = g5_pfunc_switch_volt;
+ g5_switch_freq = g5_pfunc_switch_freq;
+ g5_query_freq = g5_pfunc_query_freq;
+
+ /* Force apply current frequency to make sure everything is in
+ * sync (voltage is right for example). Firmware may leave us with
+ * a strange setting ...
+ */
+ g5_switch_volt(CPUFREQ_HIGH);
+ msleep(10);
+ g5_pmode_cur = -1;
+ g5_switch_freq(g5_query_freq());
+
+ printk(KERN_INFO "Registering G5 CPU frequency driver\n");
+ printk(KERN_INFO "Frequency method: i2c/pfunc, "
+ "Voltage method: %s\n", has_volt ? "i2c/pfunc" : "none");
+ printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
+ g5_cpu_freqs[1].frequency/1000,
+ g5_cpu_freqs[0].frequency/1000,
+ g5_cpu_freqs[g5_pmode_cur].frequency/1000);
+
+ rc = cpufreq_register_driver(&g5_cpufreq_driver);
+ bail:
+ if (rc != 0) {
+ pmf_put_function(pfunc_cpu_getfreq);
+ pmf_put_function(pfunc_cpu_setfreq_high);
+ pmf_put_function(pfunc_cpu_setfreq_low);
+ pmf_put_function(pfunc_slewing_done);
+ pmf_put_function(pfunc_cpu0_volt_high);
+ pmf_put_function(pfunc_cpu0_volt_low);
+ pmf_put_function(pfunc_cpu1_volt_high);
+ pmf_put_function(pfunc_cpu1_volt_low);
+ }
+ of_node_put(hwclock);
+ of_node_put(cpuid);
+ of_node_put(cpunode);
+
+ return rc;
+}
+
+static int __init g5_rm31_cpufreq_init(struct device_node *cpus)
+{
+ /* NYI */
+ return 0;
+}
+
+static int __init g5_cpufreq_init(void)
+{
+ struct device_node *cpus;
+ int rc;
+
+ cpus = of_find_node_by_path("/cpus");
+ if (cpus == NULL) {
+ DBG("No /cpus node !\n");
+ return -ENODEV;
+ }
+
+ if (machine_is_compatible("PowerMac7,2") ||
+ machine_is_compatible("PowerMac7,3"))
+ rc = g5_pm72_cpufreq_init(cpus);
+ else if (machine_is_compatible("RackMac3,1"))
+ rc = g5_rm31_cpufreq_init(cpus);
+ else
+ rc = g5_neo2_cpufreq_init(cpus);
+
+ of_node_put(cpus);
+ return rc;
+}
+
module_init(g5_cpufreq_init);
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index f6e22da2a5da..558dd0692092 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -58,12 +58,11 @@ extern int powersave_lowspeed;
extern int powersave_nap;
extern struct device_node *k2_skiplist[2];
-
/*
* We use a single global lock to protect accesses. Each driver has
* to take care of its own locking
*/
-static DEFINE_SPINLOCK(feature_lock);
+DEFINE_SPINLOCK(feature_lock);
#define LOCK(flags) spin_lock_irqsave(&feature_lock, flags);
#define UNLOCK(flags) spin_unlock_irqrestore(&feature_lock, flags);
@@ -101,26 +100,17 @@ static const char *macio_names[] =
"Keylargo",
"Pangea",
"Intrepid",
- "K2"
+ "K2",
+ "Shasta",
};
+struct device_node *uninorth_node;
+u32 __iomem *uninorth_base;
-/*
- * Uninorth reg. access. Note that Uni-N regs are big endian
- */
-
-#define UN_REG(r) (uninorth_base + ((r) >> 2))
-#define UN_IN(r) (in_be32(UN_REG(r)))
-#define UN_OUT(r,v) (out_be32(UN_REG(r), (v)))
-#define UN_BIS(r,v) (UN_OUT((r), UN_IN(r) | (v)))
-#define UN_BIC(r,v) (UN_OUT((r), UN_IN(r) & ~(v)))
-
-static struct device_node *uninorth_node;
-static u32 __iomem *uninorth_base;
static u32 uninorth_rev;
-static int uninorth_u3;
-static void __iomem *u3_ht;
+static int uninorth_maj;
+static void __iomem *u3_ht_base;
/*
* For each motherboard family, we have a table of functions pointers
@@ -1399,8 +1389,15 @@ static long g5_fw_enable(struct device_node *node, long param, long value)
static long g5_mpic_enable(struct device_node *node, long param, long value)
{
unsigned long flags;
+ struct device_node *parent = of_get_parent(node);
+ int is_u3;
- if (node->parent == NULL || strcmp(node->parent->name, "u3"))
+ if (parent == NULL)
+ return 0;
+ is_u3 = strcmp(parent->name, "u3") == 0 ||
+ strcmp(parent->name, "u4") == 0;
+ of_node_put(parent);
+ if (!is_u3)
return 0;
LOCK(flags);
@@ -1445,20 +1442,53 @@ static long g5_i2s_enable(struct device_node *node, long param, long value)
/* Very crude implementation for now */
struct macio_chip *macio = &macio_chips[0];
unsigned long flags;
-
- if (value == 0)
- return 0; /* don't disable yet */
+ int cell;
+ u32 fcrs[3][3] = {
+ { 0,
+ K2_FCR1_I2S0_CELL_ENABLE |
+ K2_FCR1_I2S0_CLK_ENABLE_BIT | K2_FCR1_I2S0_ENABLE,
+ KL3_I2S0_CLK18_ENABLE
+ },
+ { KL0_SCC_A_INTF_ENABLE,
+ K2_FCR1_I2S1_CELL_ENABLE |
+ K2_FCR1_I2S1_CLK_ENABLE_BIT | K2_FCR1_I2S1_ENABLE,
+ KL3_I2S1_CLK18_ENABLE
+ },
+ { KL0_SCC_B_INTF_ENABLE,
+ SH_FCR1_I2S2_CELL_ENABLE |
+ SH_FCR1_I2S2_CLK_ENABLE_BIT | SH_FCR1_I2S2_ENABLE,
+ SH_FCR3_I2S2_CLK18_ENABLE
+ },
+ };
+
+ if (macio->type != macio_keylargo2 && macio->type != macio_shasta)
+ return -ENODEV;
+ if (strncmp(node->name, "i2s-", 4))
+ return -ENODEV;
+ cell = node->name[4] - 'a';
+ switch(cell) {
+ case 0:
+ case 1:
+ break;
+ case 2:
+ if (macio->type == macio_shasta)
+ break;
+ default:
+ return -ENODEV;
+ }
LOCK(flags);
- MACIO_BIS(KEYLARGO_FCR3, KL3_CLK45_ENABLE | KL3_CLK49_ENABLE |
- KL3_I2S0_CLK18_ENABLE);
- udelay(10);
- MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_I2S0_CELL_ENABLE |
- K2_FCR1_I2S0_CLK_ENABLE_BIT | K2_FCR1_I2S0_ENABLE);
+ if (value) {
+ MACIO_BIC(KEYLARGO_FCR0, fcrs[cell][0]);
+ MACIO_BIS(KEYLARGO_FCR1, fcrs[cell][1]);
+ MACIO_BIS(KEYLARGO_FCR3, fcrs[cell][2]);
+ } else {
+ MACIO_BIC(KEYLARGO_FCR3, fcrs[cell][2]);
+ MACIO_BIC(KEYLARGO_FCR1, fcrs[cell][1]);
+ MACIO_BIS(KEYLARGO_FCR0, fcrs[cell][0]);
+ }
udelay(10);
- MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_I2S0_RESET);
UNLOCK(flags);
- udelay(10);
return 0;
}
@@ -1473,7 +1503,7 @@ static long g5_reset_cpu(struct device_node *node, long param, long value)
struct device_node *np;
macio = &macio_chips[0];
- if (macio->type != macio_keylargo2)
+ if (macio->type != macio_keylargo2 && macio->type != macio_shasta)
return -ENODEV;
np = find_path_device("/cpus");
@@ -1512,14 +1542,17 @@ static long g5_reset_cpu(struct device_node *node, long param, long value)
*/
void g5_phy_disable_cpu1(void)
{
- UN_OUT(U3_API_PHY_CONFIG_1, 0);
+ if (uninorth_maj == 3)
+ UN_OUT(U3_API_PHY_CONFIG_1, 0);
}
#endif /* CONFIG_POWER4 */
#ifndef CONFIG_POWER4
-static void
-keylargo_shutdown(struct macio_chip *macio, int sleep_mode)
+
+#ifdef CONFIG_PM
+
+static void keylargo_shutdown(struct macio_chip *macio, int sleep_mode)
{
u32 temp;
@@ -1572,8 +1605,7 @@ keylargo_shutdown(struct macio_chip *macio, int sleep_mode)
(void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1);
}
-static void
-pangea_shutdown(struct macio_chip *macio, int sleep_mode)
+static void pangea_shutdown(struct macio_chip *macio, int sleep_mode)
{
u32 temp;
@@ -1606,8 +1638,7 @@ pangea_shutdown(struct macio_chip *macio, int sleep_mode)
(void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1);
}
-static void
-intrepid_shutdown(struct macio_chip *macio, int sleep_mode)
+static void intrepid_shutdown(struct macio_chip *macio, int sleep_mode)
{
u32 temp;
@@ -1635,124 +1666,6 @@ intrepid_shutdown(struct macio_chip *macio, int sleep_mode)
}
-void pmac_tweak_clock_spreading(int enable)
-{
- struct macio_chip *macio = &macio_chips[0];
-
- /* Hack for doing clock spreading on some machines PowerBooks and
- * iBooks. This implements the "platform-do-clockspreading" OF
- * property as decoded manually on various models. For safety, we also
- * check the product ID in the device-tree in cases we'll whack the i2c
- * chip to make reasonably sure we won't set wrong values in there
- *
- * Of course, ultimately, we have to implement a real parser for
- * the platform-do-* stuff...
- */
-
- if (macio->type == macio_intrepid) {
- struct device_node *clock =
- of_find_node_by_path("/uni-n@f8000000/hw-clock");
- if (clock && get_property(clock, "platform-do-clockspreading",
- NULL)) {
- printk(KERN_INFO "%sabling clock spreading on Intrepid"
- " ASIC\n", enable ? "En" : "Dis");
- if (enable)
- UN_OUT(UNI_N_CLOCK_SPREADING, 2);
- else
- UN_OUT(UNI_N_CLOCK_SPREADING, 0);
- mdelay(40);
- }
- of_node_put(clock);
- }
-
- while (machine_is_compatible("PowerBook5,2") ||
- machine_is_compatible("PowerBook5,3") ||
- machine_is_compatible("PowerBook6,2") ||
- machine_is_compatible("PowerBook6,3")) {
- struct device_node *ui2c = of_find_node_by_type(NULL, "i2c");
- struct device_node *dt = of_find_node_by_name(NULL, "device-tree");
- u8 buffer[9];
- u32 *productID;
- int i, rc, changed = 0;
-
- if (dt == NULL)
- break;
- productID = (u32 *)get_property(dt, "pid#", NULL);
- if (productID == NULL)
- break;
- while(ui2c) {
- struct device_node *p = of_get_parent(ui2c);
- if (p && !strcmp(p->name, "uni-n"))
- break;
- ui2c = of_find_node_by_type(ui2c, "i2c");
- }
- if (ui2c == NULL)
- break;
- DBG("Trying to bump clock speed for PID: %08x...\n", *productID);
- rc = pmac_low_i2c_open(ui2c, 1);
- if (rc != 0)
- break;
- pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_combined);
- rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_read, 0x80, buffer, 9);
- DBG("read result: %d,", rc);
- if (rc != 0) {
- pmac_low_i2c_close(ui2c);
- break;
- }
- for (i=0; i<9; i++)
- DBG(" %02x", buffer[i]);
- DBG("\n");
-
- switch(*productID) {
- case 0x1182: /* AlBook 12" rev 2 */
- case 0x1183: /* iBook G4 12" */
- buffer[0] = (buffer[0] & 0x8f) | 0x70;
- buffer[2] = (buffer[2] & 0x7f) | 0x00;
- buffer[5] = (buffer[5] & 0x80) | 0x31;
- buffer[6] = (buffer[6] & 0x40) | 0xb0;
- buffer[7] = (buffer[7] & 0x00) | (enable ? 0xc0 : 0xba);
- buffer[8] = (buffer[8] & 0x00) | 0x30;
- changed = 1;
- break;
- case 0x3142: /* AlBook 15" (ATI M10) */
- case 0x3143: /* AlBook 17" (ATI M10) */
- buffer[0] = (buffer[0] & 0xaf) | 0x50;
- buffer[2] = (buffer[2] & 0x7f) | 0x00;
- buffer[5] = (buffer[5] & 0x80) | 0x31;
- buffer[6] = (buffer[6] & 0x40) | 0xb0;
- buffer[7] = (buffer[7] & 0x00) | (enable ? 0xd0 : 0xc0);
- buffer[8] = (buffer[8] & 0x00) | 0x30;
- changed = 1;
- break;
- default:
- DBG("i2c-hwclock: Machine model not handled\n");
- break;
- }
- if (!changed) {
- pmac_low_i2c_close(ui2c);
- break;
- }
- printk(KERN_INFO "%sabling clock spreading on i2c clock chip\n",
- enable ? "En" : "Dis");
-
- pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_stdsub);
- rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_write, 0x80, buffer, 9);
- DBG("write result: %d,", rc);
- pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_combined);
- rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_read, 0x80, buffer, 9);
- DBG("read result: %d,", rc);
- if (rc != 0) {
- pmac_low_i2c_close(ui2c);
- break;
- }
- for (i=0; i<9; i++)
- DBG(" %02x", buffer[i]);
- pmac_low_i2c_close(ui2c);
- break;
- }
-}
-
-
static int
core99_sleep(void)
{
@@ -1909,6 +1822,8 @@ core99_wake_up(void)
return 0;
}
+#endif /* CONFIG_PM */
+
static long
core99_sleep_state(struct device_node *node, long param, long value)
{
@@ -1930,10 +1845,13 @@ core99_sleep_state(struct device_node *node, long param, long value)
if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
return -EPERM;
+#ifdef CONFIG_PM
if (value == 1)
return core99_sleep();
else if (value == 0)
return core99_wake_up();
+
+#endif /* CONFIG_PM */
return 0;
}
@@ -2057,7 +1975,9 @@ static struct feature_table_entry core99_features[] = {
{ PMAC_FTR_USB_ENABLE, core99_usb_enable },
{ PMAC_FTR_1394_ENABLE, core99_firewire_enable },
{ PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
+#ifdef CONFIG_PM
{ PMAC_FTR_SLEEP_STATE, core99_sleep_state },
+#endif
#ifdef CONFIG_SMP
{ PMAC_FTR_RESET_CPU, core99_reset_cpu },
#endif /* CONFIG_SMP */
@@ -2427,6 +2347,14 @@ static struct pmac_mb_def pmac_mb_defs[] = {
PMAC_TYPE_POWERMAC_G5_U3L, g5_features,
0,
},
+ { "PowerMac11,2", "PowerMac G5 Dual Core",
+ PMAC_TYPE_POWERMAC_G5_U3L, g5_features,
+ 0,
+ },
+ { "PowerMac12,1", "iMac G5 (iSight)",
+ PMAC_TYPE_POWERMAC_G5_U3L, g5_features,
+ 0,
+ },
{ "RackMac3,1", "XServe G5",
PMAC_TYPE_XSERVE_G5, g5_features,
0,
@@ -2539,6 +2467,11 @@ static int __init probe_motherboard(void)
pmac_mb.model_name = "Unknown K2-based";
pmac_mb.features = g5_features;
break;
+ case macio_shasta:
+ pmac_mb.model_id = PMAC_TYPE_UNKNOWN_SHASTA;
+ pmac_mb.model_name = "Unknown Shasta-based";
+ pmac_mb.features = g5_features;
+ break;
#endif /* CONFIG_POWER4 */
default:
return -ENODEV;
@@ -2607,6 +2540,8 @@ found:
*/
static void __init probe_uninorth(void)
{
+ u32 *addrp;
+ phys_addr_t address;
unsigned long actrl;
/* Locate core99 Uni-N */
@@ -2614,22 +2549,31 @@ static void __init probe_uninorth(void)
/* Locate G5 u3 */
if (uninorth_node == NULL) {
uninorth_node = of_find_node_by_name(NULL, "u3");
- uninorth_u3 = 1;
- }
- if (uninorth_node && uninorth_node->n_addrs > 0) {
- unsigned long address = uninorth_node->addrs[0].address;
- uninorth_base = ioremap(address, 0x40000);
- uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
- if (uninorth_u3)
- u3_ht = ioremap(address + U3_HT_CONFIG_BASE, 0x1000);
- } else
- uninorth_node = NULL;
-
- if (!uninorth_node)
+ uninorth_maj = 3;
+ }
+ /* Locate G5 u4 */
+ if (uninorth_node == NULL) {
+ uninorth_node = of_find_node_by_name(NULL, "u4");
+ uninorth_maj = 4;
+ }
+ if (uninorth_node == NULL)
return;
- printk(KERN_INFO "Found %s memory controller & host bridge, revision: %d\n",
- uninorth_u3 ? "U3" : "UniNorth", uninorth_rev);
+ addrp = (u32 *)get_property(uninorth_node, "reg", NULL);
+ if (addrp == NULL)
+ return;
+ address = of_translate_address(uninorth_node, addrp);
+ if (address == 0)
+ return;
+ uninorth_base = ioremap(address, 0x40000);
+ uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
+ if (uninorth_maj == 3 || uninorth_maj == 4)
+ u3_ht_base = ioremap(address + U3_HT_CONFIG_BASE, 0x1000);
+
+ printk(KERN_INFO "Found %s memory controller & host bridge"
+ " @ 0x%08x revision: 0x%02x\n", uninorth_maj == 3 ? "U3" :
+ uninorth_maj == 4 ? "U4" : "UniNorth",
+ (unsigned int)address, uninorth_rev);
printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base);
/* Set the arbitrer QAck delay according to what Apple does
@@ -2637,7 +2581,8 @@ static void __init probe_uninorth(void)
if (uninorth_rev < 0x11) {
actrl = UN_IN(UNI_N_ARB_CTRL) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK;
actrl |= ((uninorth_rev < 3) ? UNI_N_ARB_CTRL_QACK_DELAY105 :
- UNI_N_ARB_CTRL_QACK_DELAY) << UNI_N_ARB_CTRL_QACK_DELAY_SHIFT;
+ UNI_N_ARB_CTRL_QACK_DELAY) <<
+ UNI_N_ARB_CTRL_QACK_DELAY_SHIFT;
UN_OUT(UNI_N_ARB_CTRL, actrl);
}
@@ -2645,7 +2590,8 @@ static void __init probe_uninorth(void)
* revs 1.5 to 2.O and Pangea. Seem to toggle the UniN Maxbus/PCI
* memory timeout
*/
- if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) || uninorth_rev == 0xc0)
+ if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) ||
+ uninorth_rev == 0xc0)
UN_OUT(0x2160, UN_IN(0x2160) & 0x00ffffff);
}
@@ -2653,18 +2599,17 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ
{
struct device_node* node;
int i;
- volatile u32 __iomem * base;
- u32* revp;
+ volatile u32 __iomem *base;
+ u32 *addrp, *revp;
+ phys_addr_t addr;
+ u64 size;
- node = find_devices(name);
- if (!node || !node->n_addrs)
- return;
- if (compat)
- do {
- if (device_is_compatible(node, compat))
- break;
- node = node->next;
- } while (node);
+ for (node = NULL; (node = of_find_node_by_name(node, name)) != NULL;) {
+ if (!compat)
+ break;
+ if (device_is_compatible(node, compat))
+ break;
+ }
if (!node)
return;
for(i=0; i<MAX_MACIO_CHIPS; i++) {
@@ -2673,22 +2618,38 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ
if (macio_chips[i].of_node == node)
return;
}
+
if (i >= MAX_MACIO_CHIPS) {
printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n");
printk(KERN_ERR "pmac_feature: %s skipped\n", node->full_name);
return;
}
- base = ioremap(node->addrs[0].address, node->addrs[0].size);
+ addrp = of_get_pci_address(node, 0, &size, NULL);
+ if (addrp == NULL) {
+ printk(KERN_ERR "pmac_feature: %s: can't find base !\n",
+ node->full_name);
+ return;
+ }
+ addr = of_translate_address(node, addrp);
+ if (addr == 0) {
+ printk(KERN_ERR "pmac_feature: %s, can't translate base !\n",
+ node->full_name);
+ return;
+ }
+ base = ioremap(addr, (unsigned long)size);
if (!base) {
- printk(KERN_ERR "pmac_feature: Can't map mac-io chip !\n");
+ printk(KERN_ERR "pmac_feature: %s, can't map mac-io chip !\n",
+ node->full_name);
return;
}
- if (type == macio_keylargo) {
+ if (type == macio_keylargo || type == macio_keylargo2) {
u32 *did = (u32 *)get_property(node, "device-id", NULL);
if (*did == 0x00000025)
type = macio_pangea;
if (*did == 0x0000003e)
type = macio_intrepid;
+ if (*did == 0x0000004f)
+ type = macio_shasta;
}
macio_chips[i].of_node = node;
macio_chips[i].type = type;
@@ -2787,7 +2748,8 @@ set_initial_features(void)
}
#ifdef CONFIG_POWER4
- if (macio_chips[0].type == macio_keylargo2) {
+ if (macio_chips[0].type == macio_keylargo2 ||
+ macio_chips[0].type == macio_shasta) {
#ifndef CONFIG_SMP
/* On SMP machines running UP, we have the second CPU eating
* bus cycles. We need to take it off the bus. This is done
@@ -2896,12 +2858,6 @@ set_initial_features(void)
MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
}
- /* Some machine models need the clock chip to be properly setup for
- * clock spreading now. This should be a platform function but we
- * don't do these at the moment
- */
- pmac_tweak_clock_spreading(1);
-
#endif /* CONFIG_POWER4 */
/* On all machines, switch modem & serial ports off */
@@ -2929,9 +2885,6 @@ pmac_feature_init(void)
return;
}
- /* Setup low-level i2c stuffs */
- pmac_init_low_i2c();
-
/* Probe machine type */
if (probe_motherboard())
printk(KERN_WARNING "Unknown PowerMac !\n");
@@ -2942,26 +2895,6 @@ pmac_feature_init(void)
set_initial_features();
}
-int __init pmac_feature_late_init(void)
-{
-#if 0
- struct device_node *np;
-
- /* Request some resources late */
- if (uninorth_node)
- request_OF_resource(uninorth_node, 0, NULL);
- np = find_devices("hammerhead");
- if (np)
- request_OF_resource(np, 0, NULL);
- np = find_devices("interrupt-controller");
- if (np)
- request_OF_resource(np, 0, NULL);
-#endif
- return 0;
-}
-
-device_initcall(pmac_feature_late_init);
-
#if 0
static void dump_HT_speeds(char *name, u32 cfg, u32 frq)
{
@@ -2984,9 +2917,9 @@ void __init pmac_check_ht_link(void)
u8 px_bus, px_devfn;
struct pci_controller *px_hose;
- (void)in_be32(u3_ht + U3_HT_LINK_COMMAND);
- ucfg = cfg = in_be32(u3_ht + U3_HT_LINK_CONFIG);
- ufreq = freq = in_be32(u3_ht + U3_HT_LINK_FREQ);
+ (void)in_be32(u3_ht_base + U3_HT_LINK_COMMAND);
+ ucfg = cfg = in_be32(u3_ht_base + U3_HT_LINK_CONFIG);
+ ufreq = freq = in_be32(u3_ht_base + U3_HT_LINK_FREQ);
dump_HT_speeds("U3 HyperTransport", cfg, freq);
pcix_node = of_find_compatible_node(NULL, "pci", "pci-x");
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index f3f39e8e337a..535c802b369f 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -1,22 +1,34 @@
/*
- * arch/ppc/platforms/pmac_low_i2c.c
+ * arch/powerpc/platforms/powermac/low_i2c.c
*
- * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ * Copyright (C) 2003-2005 Ben. Herrenschmidt (benh@kernel.crashing.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * This file contains some low-level i2c access routines that
- * need to be used by various bits of the PowerMac platform code
- * at times where the real asynchronous & interrupt driven driver
- * cannot be used. The API borrows some semantics from the darwin
- * driver in order to ease the implementation of the platform
- * properties parser
+ * The linux i2c layer isn't completely suitable for our needs for various
+ * reasons ranging from too late initialisation to semantics not perfectly
+ * matching some requirements of the apple platform functions etc...
+ *
+ * This file thus provides a simple low level unified i2c interface for
+ * powermac that covers the various types of i2c busses used in Apple machines.
+ * For now, keywest, PMU and SMU, though we could add Cuda, or other bit
+ * banging busses found on older chipstes in earlier machines if we ever need
+ * one of them.
+ *
+ * The drivers in this file are synchronous/blocking. In addition, the
+ * keywest one is fairly slow due to the use of msleep instead of interrupts
+ * as the interrupt is currently used by i2c-keywest. In the long run, we
+ * might want to get rid of those high-level interfaces to linux i2c layer
+ * either completely (converting all drivers) or replacing them all with a
+ * single stub driver on top of this one. Once done, the interrupt will be
+ * available for our use.
*/
#undef DEBUG
+#undef DEBUG_LOW
#include <linux/config.h>
#include <linux/types.h>
@@ -25,66 +37,91 @@
#include <linux/module.h>
#include <linux/adb.h>
#include <linux/pmu.h>
+#include <linux/delay.h>
+#include <linux/completion.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/completion.h>
+#include <linux/timer.h>
#include <asm/keylargo.h>
#include <asm/uninorth.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/machdep.h>
+#include <asm/smu.h>
+#include <asm/pmac_pfunc.h>
#include <asm/pmac_low_i2c.h>
-#define MAX_LOW_I2C_HOST 4
-
#ifdef DEBUG
#define DBG(x...) do {\
- printk(KERN_DEBUG "KW:" x); \
+ printk(KERN_DEBUG "low_i2c:" x); \
} while(0)
#else
#define DBG(x...)
#endif
-struct low_i2c_host;
-
-typedef int (*low_i2c_func_t)(struct low_i2c_host *host, u8 addr, u8 sub, u8 *data, int len);
+#ifdef DEBUG_LOW
+#define DBG_LOW(x...) do {\
+ printk(KERN_DEBUG "low_i2c:" x); \
+ } while(0)
+#else
+#define DBG_LOW(x...)
+#endif
-struct low_i2c_host
-{
- struct device_node *np; /* OF device node */
- struct semaphore mutex; /* Access mutex for use by i2c-keywest */
- low_i2c_func_t func; /* Access function */
- unsigned int is_open : 1; /* Poor man's access control */
- int mode; /* Current mode */
- int channel; /* Current channel */
- int num_channels; /* Number of channels */
- void __iomem *base; /* For keywest-i2c, base address */
- int bsteps; /* And register stepping */
- int speed; /* And speed */
-};
-static struct low_i2c_host low_i2c_hosts[MAX_LOW_I2C_HOST];
+static int pmac_i2c_force_poll = 1;
-/* No locking is necessary on allocation, we are running way before
- * anything can race with us
+/*
+ * A bus structure. Each bus in the system has such a structure associated.
*/
-static struct low_i2c_host *find_low_i2c_host(struct device_node *np)
+struct pmac_i2c_bus
{
- int i;
+ struct list_head link;
+ struct device_node *controller;
+ struct device_node *busnode;
+ int type;
+ int flags;
+ struct i2c_adapter *adapter;
+ void *hostdata;
+ int channel; /* some hosts have multiple */
+ int mode; /* current mode */
+ struct semaphore sem;
+ int opened;
+ int polled; /* open mode */
+ struct platform_device *platform_dev;
+
+ /* ops */
+ int (*open)(struct pmac_i2c_bus *bus);
+ void (*close)(struct pmac_i2c_bus *bus);
+ int (*xfer)(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
+ u32 subaddr, u8 *data, int len);
+};
- for (i = 0; i < MAX_LOW_I2C_HOST; i++)
- if (low_i2c_hosts[i].np == np)
- return &low_i2c_hosts[i];
- return NULL;
-}
+static LIST_HEAD(pmac_i2c_busses);
/*
- *
- * i2c-keywest implementation (UniNorth, U2, U3, Keylargo's)
- *
+ * Keywest implementation
*/
-/*
- * Keywest i2c definitions borrowed from drivers/i2c/i2c-keywest.h,
- * should be moved somewhere in include/asm-ppc/
- */
+struct pmac_i2c_host_kw
+{
+ struct semaphore mutex; /* Access mutex for use by
+ * i2c-keywest */
+ void __iomem *base; /* register base address */
+ int bsteps; /* register stepping */
+ int speed; /* speed */
+ int irq;
+ u8 *data;
+ unsigned len;
+ int state;
+ int rw;
+ int polled;
+ int result;
+ struct completion complete;
+ spinlock_t lock;
+ struct timer_list timeout_timer;
+};
+
/* Register indices */
typedef enum {
reg_mode = 0,
@@ -97,6 +134,8 @@ typedef enum {
reg_data
} reg_t;
+/* The Tumbler audio equalizer can be really slow sometimes */
+#define KW_POLL_TIMEOUT (2*HZ)
/* Mode register */
#define KW_I2C_MODE_100KHZ 0x00
@@ -140,8 +179,9 @@ enum {
};
#define WRONG_STATE(name) do {\
- printk(KERN_DEBUG "KW: wrong state. Got %s, state: %s (isr: %02x)\n", \
- name, __kw_state_names[state], isr); \
+ printk(KERN_DEBUG "KW: wrong state. Got %s, state: %s " \
+ "(isr: %02x)\n", \
+ name, __kw_state_names[host->state], isr); \
} while(0)
static const char *__kw_state_names[] = {
@@ -153,120 +193,137 @@ static const char *__kw_state_names[] = {
"state_dead"
};
-static inline u8 __kw_read_reg(struct low_i2c_host *host, reg_t reg)
+static inline u8 __kw_read_reg(struct pmac_i2c_host_kw *host, reg_t reg)
{
return readb(host->base + (((unsigned int)reg) << host->bsteps));
}
-static inline void __kw_write_reg(struct low_i2c_host *host, reg_t reg, u8 val)
+static inline void __kw_write_reg(struct pmac_i2c_host_kw *host,
+ reg_t reg, u8 val)
{
writeb(val, host->base + (((unsigned)reg) << host->bsteps));
(void)__kw_read_reg(host, reg_subaddr);
}
-#define kw_write_reg(reg, val) __kw_write_reg(host, reg, val)
-#define kw_read_reg(reg) __kw_read_reg(host, reg)
-
+#define kw_write_reg(reg, val) __kw_write_reg(host, reg, val)
+#define kw_read_reg(reg) __kw_read_reg(host, reg)
-/* Don't schedule, the g5 fan controller is too
- * timing sensitive
- */
-static u8 kw_wait_interrupt(struct low_i2c_host* host)
+static u8 kw_i2c_wait_interrupt(struct pmac_i2c_host_kw *host)
{
int i, j;
u8 isr;
- for (i = 0; i < 100000; i++) {
+ for (i = 0; i < 1000; i++) {
isr = kw_read_reg(reg_isr) & KW_I2C_IRQ_MASK;
if (isr != 0)
return isr;
/* This code is used with the timebase frozen, we cannot rely
- * on udelay ! For now, just use a bogus loop
+ * on udelay nor schedule when in polled mode !
+ * For now, just use a bogus loop....
*/
- for (j = 1; j < 10000; j++)
- mb();
+ if (host->polled) {
+ for (j = 1; j < 100000; j++)
+ mb();
+ } else
+ msleep(1);
}
return isr;
}
-static int kw_handle_interrupt(struct low_i2c_host *host, int state, int rw, int *rc, u8 **data, int *len, u8 isr)
+static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr)
{
u8 ack;
- DBG("kw_handle_interrupt(%s, isr: %x)\n", __kw_state_names[state], isr);
+ DBG_LOW("kw_handle_interrupt(%s, isr: %x)\n",
+ __kw_state_names[host->state], isr);
+
+ if (host->state == state_idle) {
+ printk(KERN_WARNING "low_i2c: Keywest got an out of state"
+ " interrupt, ignoring\n");
+ kw_write_reg(reg_isr, isr);
+ return;
+ }
if (isr == 0) {
- if (state != state_stop) {
- DBG("KW: Timeout !\n");
- *rc = -EIO;
+ if (host->state != state_stop) {
+ DBG_LOW("KW: Timeout !\n");
+ host->result = -EIO;
goto stop;
}
- if (state == state_stop) {
+ if (host->state == state_stop) {
ack = kw_read_reg(reg_status);
- if (!(ack & KW_I2C_STAT_BUSY)) {
- state = state_idle;
- kw_write_reg(reg_ier, 0x00);
- }
+ if (ack & KW_I2C_STAT_BUSY)
+ kw_write_reg(reg_status, 0);
+ host->state = state_idle;
+ kw_write_reg(reg_ier, 0x00);
+ if (!host->polled)
+ complete(&host->complete);
}
- return state;
+ return;
}
if (isr & KW_I2C_IRQ_ADDR) {
ack = kw_read_reg(reg_status);
- if (state != state_addr) {
+ if (host->state != state_addr) {
kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR);
WRONG_STATE("KW_I2C_IRQ_ADDR");
- *rc = -EIO;
+ host->result = -EIO;
goto stop;
}
- if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
- *rc = -ENODEV;
- DBG("KW: NAK on address\n");
- return state_stop;
+ if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
+ host->result = -ENODEV;
+ DBG_LOW("KW: NAK on address\n");
+ host->state = state_stop;
+ return;
} else {
- if (rw) {
- state = state_read;
- if (*len > 1)
- kw_write_reg(reg_control, KW_I2C_CTL_AAK);
+ if (host->len == 0) {
+ kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR);
+ goto stop;
+ }
+ if (host->rw) {
+ host->state = state_read;
+ if (host->len > 1)
+ kw_write_reg(reg_control,
+ KW_I2C_CTL_AAK);
} else {
- state = state_write;
- kw_write_reg(reg_data, **data);
- (*data)++; (*len)--;
+ host->state = state_write;
+ kw_write_reg(reg_data, *(host->data++));
+ host->len--;
}
}
kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR);
}
if (isr & KW_I2C_IRQ_DATA) {
- if (state == state_read) {
- **data = kw_read_reg(reg_data);
- (*data)++; (*len)--;
+ if (host->state == state_read) {
+ *(host->data++) = kw_read_reg(reg_data);
+ host->len--;
kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
- if ((*len) == 0)
- state = state_stop;
- else if ((*len) == 1)
+ if (host->len == 0)
+ host->state = state_stop;
+ else if (host->len == 1)
kw_write_reg(reg_control, 0);
- } else if (state == state_write) {
+ } else if (host->state == state_write) {
ack = kw_read_reg(reg_status);
if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
- DBG("KW: nack on data write\n");
- *rc = -EIO;
+ DBG_LOW("KW: nack on data write\n");
+ host->result = -EIO;
goto stop;
- } else if (*len) {
- kw_write_reg(reg_data, **data);
- (*data)++; (*len)--;
+ } else if (host->len) {
+ kw_write_reg(reg_data, *(host->data++));
+ host->len--;
} else {
kw_write_reg(reg_control, KW_I2C_CTL_STOP);
- state = state_stop;
- *rc = 0;
+ host->state = state_stop;
+ host->result = 0;
}
kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
} else {
kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
WRONG_STATE("KW_I2C_IRQ_DATA");
- if (state != state_stop) {
- *rc = -EIO;
+ if (host->state != state_stop) {
+ host->result = -EIO;
goto stop;
}
}
@@ -274,98 +331,194 @@ static int kw_handle_interrupt(struct low_i2c_host *host, int state, int rw, int
if (isr & KW_I2C_IRQ_STOP) {
kw_write_reg(reg_isr, KW_I2C_IRQ_STOP);
- if (state != state_stop) {
+ if (host->state != state_stop) {
WRONG_STATE("KW_I2C_IRQ_STOP");
- *rc = -EIO;
+ host->result = -EIO;
}
- return state_idle;
+ host->state = state_idle;
+ if (!host->polled)
+ complete(&host->complete);
}
if (isr & KW_I2C_IRQ_START)
kw_write_reg(reg_isr, KW_I2C_IRQ_START);
- return state;
-
+ return;
stop:
kw_write_reg(reg_control, KW_I2C_CTL_STOP);
- return state_stop;
+ host->state = state_stop;
+ return;
}
-static int keywest_low_i2c_func(struct low_i2c_host *host, u8 addr, u8 subaddr, u8 *data, int len)
+/* Interrupt handler */
+static irqreturn_t kw_i2c_irq(int irq, void *dev_id, struct pt_regs *regs)
{
+ struct pmac_i2c_host_kw *host = dev_id;
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ del_timer(&host->timeout_timer);
+ kw_i2c_handle_interrupt(host, kw_read_reg(reg_isr));
+ if (host->state != state_idle) {
+ host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT;
+ add_timer(&host->timeout_timer);
+ }
+ spin_unlock_irqrestore(&host->lock, flags);
+ return IRQ_HANDLED;
+}
+
+static void kw_i2c_timeout(unsigned long data)
+{
+ struct pmac_i2c_host_kw *host = (struct pmac_i2c_host_kw *)data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ kw_i2c_handle_interrupt(host, kw_read_reg(reg_isr));
+ if (host->state != state_idle) {
+ host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT;
+ add_timer(&host->timeout_timer);
+ }
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static int kw_i2c_open(struct pmac_i2c_bus *bus)
+{
+ struct pmac_i2c_host_kw *host = bus->hostdata;
+ down(&host->mutex);
+ return 0;
+}
+
+static void kw_i2c_close(struct pmac_i2c_bus *bus)
+{
+ struct pmac_i2c_host_kw *host = bus->hostdata;
+ up(&host->mutex);
+}
+
+static int kw_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
+ u32 subaddr, u8 *data, int len)
+{
+ struct pmac_i2c_host_kw *host = bus->hostdata;
u8 mode_reg = host->speed;
- int state = state_addr;
- int rc = 0;
+ int use_irq = host->irq != NO_IRQ && !bus->polled;
/* Setup mode & subaddress if any */
- switch(host->mode) {
- case pmac_low_i2c_mode_dumb:
- printk(KERN_ERR "low_i2c: Dumb mode not supported !\n");
+ switch(bus->mode) {
+ case pmac_i2c_mode_dumb:
return -EINVAL;
- case pmac_low_i2c_mode_std:
+ case pmac_i2c_mode_std:
mode_reg |= KW_I2C_MODE_STANDARD;
+ if (subsize != 0)
+ return -EINVAL;
break;
- case pmac_low_i2c_mode_stdsub:
+ case pmac_i2c_mode_stdsub:
mode_reg |= KW_I2C_MODE_STANDARDSUB;
+ if (subsize != 1)
+ return -EINVAL;
break;
- case pmac_low_i2c_mode_combined:
+ case pmac_i2c_mode_combined:
mode_reg |= KW_I2C_MODE_COMBINED;
+ if (subsize != 1)
+ return -EINVAL;
break;
}
/* Setup channel & clear pending irqs */
kw_write_reg(reg_isr, kw_read_reg(reg_isr));
- kw_write_reg(reg_mode, mode_reg | (host->channel << 4));
+ kw_write_reg(reg_mode, mode_reg | (bus->channel << 4));
kw_write_reg(reg_status, 0);
- /* Set up address and r/w bit */
- kw_write_reg(reg_addr, addr);
+ /* Set up address and r/w bit, strip possible stale bus number from
+ * address top bits
+ */
+ kw_write_reg(reg_addr, addrdir & 0xff);
/* Set up the sub address */
if ((mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB
|| (mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_COMBINED)
kw_write_reg(reg_subaddr, subaddr);
- /* Start sending address & disable interrupt*/
- kw_write_reg(reg_ier, 0 /*KW_I2C_IRQ_MASK*/);
+ /* Prepare for async operations */
+ host->data = data;
+ host->len = len;
+ host->state = state_addr;
+ host->result = 0;
+ host->rw = (addrdir & 1);
+ host->polled = bus->polled;
+
+ /* Enable interrupt if not using polled mode and interrupt is
+ * available
+ */
+ if (use_irq) {
+ /* Clear completion */
+ INIT_COMPLETION(host->complete);
+ /* Ack stale interrupts */
+ kw_write_reg(reg_isr, kw_read_reg(reg_isr));
+ /* Arm timeout */
+ host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT;
+ add_timer(&host->timeout_timer);
+ /* Enable emission */
+ kw_write_reg(reg_ier, KW_I2C_IRQ_MASK);
+ }
+
+ /* Start sending address */
kw_write_reg(reg_control, KW_I2C_CTL_XADDR);
- /* State machine, to turn into an interrupt handler */
- while(state != state_idle) {
- u8 isr = kw_wait_interrupt(host);
- state = kw_handle_interrupt(host, state, addr & 1, &rc, &data, &len, isr);
+ /* Wait for completion */
+ if (use_irq)
+ wait_for_completion(&host->complete);
+ else {
+ while(host->state != state_idle) {
+ unsigned long flags;
+
+ u8 isr = kw_i2c_wait_interrupt(host);
+ spin_lock_irqsave(&host->lock, flags);
+ kw_i2c_handle_interrupt(host, isr);
+ spin_unlock_irqrestore(&host->lock, flags);
+ }
}
- return rc;
+ /* Disable emission */
+ kw_write_reg(reg_ier, 0);
+
+ return host->result;
}
-static void keywest_low_i2c_add(struct device_node *np)
+static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
{
- struct low_i2c_host *host = find_low_i2c_host(NULL);
- u32 *psteps, *prate, steps, aoffset = 0;
- struct device_node *parent;
+ struct pmac_i2c_host_kw *host;
+ u32 *psteps, *prate, *addrp, steps;
+ host = kzalloc(sizeof(struct pmac_i2c_host_kw), GFP_KERNEL);
if (host == NULL) {
printk(KERN_ERR "low_i2c: Can't allocate host for %s\n",
np->full_name);
- return;
+ return NULL;
}
- memset(host, 0, sizeof(*host));
+ /* Apple is kind enough to provide a valid AAPL,address property
+ * on all i2c keywest nodes so far ... we would have to fallback
+ * to macio parsing if that wasn't the case
+ */
+ addrp = (u32 *)get_property(np, "AAPL,address", NULL);
+ if (addrp == NULL) {
+ printk(KERN_ERR "low_i2c: Can't find address for %s\n",
+ np->full_name);
+ kfree(host);
+ return NULL;
+ }
init_MUTEX(&host->mutex);
- host->np = of_node_get(np);
+ init_completion(&host->complete);
+ spin_lock_init(&host->lock);
+ init_timer(&host->timeout_timer);
+ host->timeout_timer.function = kw_i2c_timeout;
+ host->timeout_timer.data = (unsigned long)host;
+
psteps = (u32 *)get_property(np, "AAPL,address-step", NULL);
steps = psteps ? (*psteps) : 0x10;
for (host->bsteps = 0; (steps & 0x01) == 0; host->bsteps++)
steps >>= 1;
- parent = of_get_parent(np);
- host->num_channels = 1;
- if (parent && parent->name[0] == 'u') {
- host->num_channels = 2;
- aoffset = 3;
- }
/* Select interface rate */
- host->speed = KW_I2C_MODE_100KHZ;
+ host->speed = KW_I2C_MODE_25KHZ;
prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL);
if (prate) switch(*prate) {
case 100:
@@ -378,146 +531,981 @@ static void keywest_low_i2c_add(struct device_node *np)
host->speed = KW_I2C_MODE_25KHZ;
break;
}
+ if (np->n_intrs > 0)
+ host->irq = np->intrs[0].line;
+ else
+ host->irq = NO_IRQ;
+
+ host->base = ioremap((*addrp), 0x1000);
+ if (host->base == NULL) {
+ printk(KERN_ERR "low_i2c: Can't map registers for %s\n",
+ np->full_name);
+ kfree(host);
+ return NULL;
+ }
+
+ /* Make sure IRA is disabled */
+ kw_write_reg(reg_ier, 0);
+
+ /* Request chip interrupt */
+ if (request_irq(host->irq, kw_i2c_irq, SA_SHIRQ, "keywest i2c", host))
+ host->irq = NO_IRQ;
+
+ printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n",
+ *addrp, host->irq, np->full_name);
- host->mode = pmac_low_i2c_mode_std;
- host->base = ioremap(np->addrs[0].address + aoffset,
- np->addrs[0].size);
- host->func = keywest_low_i2c_func;
+ return host;
}
+
+static void __init kw_i2c_add(struct pmac_i2c_host_kw *host,
+ struct device_node *controller,
+ struct device_node *busnode,
+ int channel)
+{
+ struct pmac_i2c_bus *bus;
+
+ bus = kzalloc(sizeof(struct pmac_i2c_bus), GFP_KERNEL);
+ if (bus == NULL)
+ return;
+
+ bus->controller = of_node_get(controller);
+ bus->busnode = of_node_get(busnode);
+ bus->type = pmac_i2c_bus_keywest;
+ bus->hostdata = host;
+ bus->channel = channel;
+ bus->mode = pmac_i2c_mode_std;
+ bus->open = kw_i2c_open;
+ bus->close = kw_i2c_close;
+ bus->xfer = kw_i2c_xfer;
+ init_MUTEX(&bus->sem);
+ if (controller == busnode)
+ bus->flags = pmac_i2c_multibus;
+ list_add(&bus->link, &pmac_i2c_busses);
+
+ printk(KERN_INFO " channel %d bus %s\n", channel,
+ (controller == busnode) ? "<multibus>" : busnode->full_name);
+}
+
+static void __init kw_i2c_probe(void)
+{
+ struct device_node *np, *child, *parent;
+
+ /* Probe keywest-i2c busses */
+ for (np = NULL;
+ (np = of_find_compatible_node(np, "i2c","keywest-i2c")) != NULL;){
+ struct pmac_i2c_host_kw *host;
+ int multibus, chans, i;
+
+ /* Found one, init a host structure */
+ host = kw_i2c_host_init(np);
+ if (host == NULL)
+ continue;
+
+ /* Now check if we have a multibus setup (old style) or if we
+ * have proper bus nodes. Note that the "new" way (proper bus
+ * nodes) might cause us to not create some busses that are
+ * kept hidden in the device-tree. In the future, we might
+ * want to work around that by creating busses without a node
+ * but not for now
+ */
+ child = of_get_next_child(np, NULL);
+ multibus = !child || strcmp(child->name, "i2c-bus");
+ of_node_put(child);
+
+ /* For a multibus setup, we get the bus count based on the
+ * parent type
+ */
+ if (multibus) {
+ parent = of_get_parent(np);
+ if (parent == NULL)
+ continue;
+ chans = parent->name[0] == 'u' ? 2 : 1;
+ for (i = 0; i < chans; i++)
+ kw_i2c_add(host, np, np, i);
+ } else {
+ for (child = NULL;
+ (child = of_get_next_child(np, child)) != NULL;) {
+ u32 *reg =
+ (u32 *)get_property(child, "reg", NULL);
+ if (reg == NULL)
+ continue;
+ kw_i2c_add(host, np, child, *reg);
+ }
+ }
+ }
+}
+
+
/*
*
* PMU implementation
*
*/
-
#ifdef CONFIG_ADB_PMU
-static int pmu_low_i2c_func(struct low_i2c_host *host, u8 addr, u8 sub, u8 *data, int len)
+/*
+ * i2c command block to the PMU
+ */
+struct pmu_i2c_hdr {
+ u8 bus;
+ u8 mode;
+ u8 bus2;
+ u8 address;
+ u8 sub_addr;
+ u8 comb_addr;
+ u8 count;
+ u8 data[];
+};
+
+static void pmu_i2c_complete(struct adb_request *req)
{
- // TODO
- return -ENODEV;
+ complete(req->arg);
}
-static void pmu_low_i2c_add(struct device_node *np)
+static int pmu_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
+ u32 subaddr, u8 *data, int len)
{
- struct low_i2c_host *host = find_low_i2c_host(NULL);
+ struct adb_request *req = bus->hostdata;
+ struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req->data[1];
+ struct completion comp;
+ int read = addrdir & 1;
+ int retry;
+ int rc = 0;
- if (host == NULL) {
- printk(KERN_ERR "low_i2c: Can't allocate host for %s\n",
- np->full_name);
- return;
+ /* For now, limit ourselves to 16 bytes transfers */
+ if (len > 16)
+ return -EINVAL;
+
+ init_completion(&comp);
+
+ for (retry = 0; retry < 16; retry++) {
+ memset(req, 0, sizeof(struct adb_request));
+ hdr->bus = bus->channel;
+ hdr->count = len;
+
+ switch(bus->mode) {
+ case pmac_i2c_mode_std:
+ if (subsize != 0)
+ return -EINVAL;
+ hdr->address = addrdir;
+ hdr->mode = PMU_I2C_MODE_SIMPLE;
+ break;
+ case pmac_i2c_mode_stdsub:
+ case pmac_i2c_mode_combined:
+ if (subsize != 1)
+ return -EINVAL;
+ hdr->address = addrdir & 0xfe;
+ hdr->comb_addr = addrdir;
+ hdr->sub_addr = subaddr;
+ if (bus->mode == pmac_i2c_mode_stdsub)
+ hdr->mode = PMU_I2C_MODE_STDSUB;
+ else
+ hdr->mode = PMU_I2C_MODE_COMBINED;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ INIT_COMPLETION(comp);
+ req->data[0] = PMU_I2C_CMD;
+ req->reply[0] = 0xff;
+ req->nbytes = sizeof(struct pmu_i2c_hdr) + 1;
+ req->done = pmu_i2c_complete;
+ req->arg = &comp;
+ if (!read && len) {
+ memcpy(hdr->data, data, len);
+ req->nbytes += len;
+ }
+ rc = pmu_queue_request(req);
+ if (rc)
+ return rc;
+ wait_for_completion(&comp);
+ if (req->reply[0] == PMU_I2C_STATUS_OK)
+ break;
+ msleep(15);
}
- memset(host, 0, sizeof(*host));
+ if (req->reply[0] != PMU_I2C_STATUS_OK)
+ return -EIO;
- init_MUTEX(&host->mutex);
- host->np = of_node_get(np);
- host->num_channels = 3;
- host->mode = pmac_low_i2c_mode_std;
- host->func = pmu_low_i2c_func;
+ for (retry = 0; retry < 16; retry++) {
+ memset(req, 0, sizeof(struct adb_request));
+
+ /* I know that looks like a lot, slow as hell, but darwin
+ * does it so let's be on the safe side for now
+ */
+ msleep(15);
+
+ hdr->bus = PMU_I2C_BUS_STATUS;
+
+ INIT_COMPLETION(comp);
+ req->data[0] = PMU_I2C_CMD;
+ req->reply[0] = 0xff;
+ req->nbytes = 2;
+ req->done = pmu_i2c_complete;
+ req->arg = &comp;
+ rc = pmu_queue_request(req);
+ if (rc)
+ return rc;
+ wait_for_completion(&comp);
+
+ if (req->reply[0] == PMU_I2C_STATUS_OK && !read)
+ return 0;
+ if (req->reply[0] == PMU_I2C_STATUS_DATAREAD && read) {
+ int rlen = req->reply_len - 1;
+
+ if (rlen != len) {
+ printk(KERN_WARNING "low_i2c: PMU returned %d"
+ " bytes, expected %d !\n", rlen, len);
+ return -EIO;
+ }
+ if (len)
+ memcpy(data, &req->reply[1], len);
+ return 0;
+ }
+ }
+ return -EIO;
+}
+
+static void __init pmu_i2c_probe(void)
+{
+ struct pmac_i2c_bus *bus;
+ struct device_node *busnode;
+ int channel, sz;
+
+ if (!pmu_present())
+ return;
+
+ /* There might or might not be a "pmu-i2c" node, we use that
+ * or via-pmu itself, whatever we find. I haven't seen a machine
+ * with separate bus nodes, so we assume a multibus setup
+ */
+ busnode = of_find_node_by_name(NULL, "pmu-i2c");
+ if (busnode == NULL)
+ busnode = of_find_node_by_name(NULL, "via-pmu");
+ if (busnode == NULL)
+ return;
+
+ printk(KERN_INFO "PMU i2c %s\n", busnode->full_name);
+
+ /*
+ * We add bus 1 and 2 only for now, bus 0 is "special"
+ */
+ for (channel = 1; channel <= 2; channel++) {
+ sz = sizeof(struct pmac_i2c_bus) + sizeof(struct adb_request);
+ bus = kzalloc(sz, GFP_KERNEL);
+ if (bus == NULL)
+ return;
+
+ bus->controller = busnode;
+ bus->busnode = busnode;
+ bus->type = pmac_i2c_bus_pmu;
+ bus->channel = channel;
+ bus->mode = pmac_i2c_mode_std;
+ bus->hostdata = bus + 1;
+ bus->xfer = pmu_i2c_xfer;
+ init_MUTEX(&bus->sem);
+ bus->flags = pmac_i2c_multibus;
+ list_add(&bus->link, &pmac_i2c_busses);
+
+ printk(KERN_INFO " channel %d bus <multibus>\n", channel);
+ }
}
#endif /* CONFIG_ADB_PMU */
-void __init pmac_init_low_i2c(void)
+
+/*
+ *
+ * SMU implementation
+ *
+ */
+
+#ifdef CONFIG_PMAC_SMU
+
+static void smu_i2c_complete(struct smu_i2c_cmd *cmd, void *misc)
{
- struct device_node *np;
+ complete(misc);
+}
- /* Probe keywest-i2c busses */
- np = of_find_compatible_node(NULL, "i2c", "keywest-i2c");
- while(np) {
- keywest_low_i2c_add(np);
- np = of_find_compatible_node(np, "i2c", "keywest-i2c");
+static int smu_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
+ u32 subaddr, u8 *data, int len)
+{
+ struct smu_i2c_cmd *cmd = bus->hostdata;
+ struct completion comp;
+ int read = addrdir & 1;
+ int rc = 0;
+
+ if ((read && len > SMU_I2C_READ_MAX) ||
+ ((!read) && len > SMU_I2C_WRITE_MAX))
+ return -EINVAL;
+
+ memset(cmd, 0, sizeof(struct smu_i2c_cmd));
+ cmd->info.bus = bus->channel;
+ cmd->info.devaddr = addrdir;
+ cmd->info.datalen = len;
+
+ switch(bus->mode) {
+ case pmac_i2c_mode_std:
+ if (subsize != 0)
+ return -EINVAL;
+ cmd->info.type = SMU_I2C_TRANSFER_SIMPLE;
+ break;
+ case pmac_i2c_mode_stdsub:
+ case pmac_i2c_mode_combined:
+ if (subsize > 3 || subsize < 1)
+ return -EINVAL;
+ cmd->info.sublen = subsize;
+ /* that's big-endian only but heh ! */
+ memcpy(&cmd->info.subaddr, ((char *)&subaddr) + (4 - subsize),
+ subsize);
+ if (bus->mode == pmac_i2c_mode_stdsub)
+ cmd->info.type = SMU_I2C_TRANSFER_STDSUB;
+ else
+ cmd->info.type = SMU_I2C_TRANSFER_COMBINED;
+ break;
+ default:
+ return -EINVAL;
}
+ if (!read && len)
+ memcpy(cmd->info.data, data, len);
+
+ init_completion(&comp);
+ cmd->done = smu_i2c_complete;
+ cmd->misc = &comp;
+ rc = smu_queue_i2c(cmd);
+ if (rc < 0)
+ return rc;
+ wait_for_completion(&comp);
+ rc = cmd->status;
+
+ if (read && len)
+ memcpy(data, cmd->info.data, len);
+ return rc < 0 ? rc : 0;
+}
+
+static void __init smu_i2c_probe(void)
+{
+ struct device_node *controller, *busnode;
+ struct pmac_i2c_bus *bus;
+ u32 *reg;
+ int sz;
+
+ if (!smu_present())
+ return;
+
+ controller = of_find_node_by_name(NULL, "smu-i2c-control");
+ if (controller == NULL)
+ controller = of_find_node_by_name(NULL, "smu");
+ if (controller == NULL)
+ return;
+
+ printk(KERN_INFO "SMU i2c %s\n", controller->full_name);
+
+ /* Look for childs, note that they might not be of the right
+ * type as older device trees mix i2c busses and other thigns
+ * at the same level
+ */
+ for (busnode = NULL;
+ (busnode = of_get_next_child(controller, busnode)) != NULL;) {
+ if (strcmp(busnode->type, "i2c") &&
+ strcmp(busnode->type, "i2c-bus"))
+ continue;
+ reg = (u32 *)get_property(busnode, "reg", NULL);
+ if (reg == NULL)
+ continue;
+
+ sz = sizeof(struct pmac_i2c_bus) + sizeof(struct smu_i2c_cmd);
+ bus = kzalloc(sz, GFP_KERNEL);
+ if (bus == NULL)
+ return;
+
+ bus->controller = controller;
+ bus->busnode = of_node_get(busnode);
+ bus->type = pmac_i2c_bus_smu;
+ bus->channel = *reg;
+ bus->mode = pmac_i2c_mode_std;
+ bus->hostdata = bus + 1;
+ bus->xfer = smu_i2c_xfer;
+ init_MUTEX(&bus->sem);
+ bus->flags = 0;
+ list_add(&bus->link, &pmac_i2c_busses);
+
+ printk(KERN_INFO " channel %x bus %s\n",
+ bus->channel, busnode->full_name);
+ }
+}
+
+#endif /* CONFIG_PMAC_SMU */
+
+/*
+ *
+ * Core code
+ *
+ */
-#ifdef CONFIG_ADB_PMU
- /* Probe PMU busses */
- np = of_find_node_by_name(NULL, "via-pmu");
- if (np)
- pmu_low_i2c_add(np);
-#endif /* CONFIG_ADB_PMU */
- /* TODO: Add CUDA support as well */
+struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node)
+{
+ struct device_node *p = of_node_get(node);
+ struct device_node *prev = NULL;
+ struct pmac_i2c_bus *bus;
+
+ while(p) {
+ list_for_each_entry(bus, &pmac_i2c_busses, link) {
+ if (p == bus->busnode) {
+ if (prev && bus->flags & pmac_i2c_multibus) {
+ u32 *reg;
+ reg = (u32 *)get_property(prev, "reg",
+ NULL);
+ if (!reg)
+ continue;
+ if (((*reg) >> 8) != bus->channel)
+ continue;
+ }
+ of_node_put(p);
+ of_node_put(prev);
+ return bus;
+ }
+ }
+ of_node_put(prev);
+ prev = p;
+ p = of_get_parent(p);
+ }
+ return NULL;
}
+EXPORT_SYMBOL_GPL(pmac_i2c_find_bus);
+
+u8 pmac_i2c_get_dev_addr(struct device_node *device)
+{
+ u32 *reg = (u32 *)get_property(device, "reg", NULL);
+
+ if (reg == NULL)
+ return 0;
+
+ return (*reg) & 0xff;
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_get_dev_addr);
+
+struct device_node *pmac_i2c_get_controller(struct pmac_i2c_bus *bus)
+{
+ return bus->controller;
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_get_controller);
+
+struct device_node *pmac_i2c_get_bus_node(struct pmac_i2c_bus *bus)
+{
+ return bus->busnode;
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_get_bus_node);
+
+int pmac_i2c_get_type(struct pmac_i2c_bus *bus)
+{
+ return bus->type;
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_get_type);
+
+int pmac_i2c_get_flags(struct pmac_i2c_bus *bus)
+{
+ return bus->flags;
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_get_flags);
+
+int pmac_i2c_get_channel(struct pmac_i2c_bus *bus)
+{
+ return bus->channel;
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_get_channel);
+
+
+void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus,
+ struct i2c_adapter *adapter)
+{
+ WARN_ON(bus->adapter != NULL);
+ bus->adapter = adapter;
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_attach_adapter);
+
+void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus,
+ struct i2c_adapter *adapter)
+{
+ WARN_ON(bus->adapter != adapter);
+ bus->adapter = NULL;
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_detach_adapter);
+
+struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus)
+{
+ return bus->adapter;
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_get_adapter);
+
+struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter)
+{
+ struct pmac_i2c_bus *bus;
+
+ list_for_each_entry(bus, &pmac_i2c_busses, link)
+ if (bus->adapter == adapter)
+ return bus;
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_adapter_to_bus);
+
+extern int pmac_i2c_match_adapter(struct device_node *dev,
+ struct i2c_adapter *adapter)
+{
+ struct pmac_i2c_bus *bus = pmac_i2c_find_bus(dev);
+
+ if (bus == NULL)
+ return 0;
+ return (bus->adapter == adapter);
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_match_adapter);
int pmac_low_i2c_lock(struct device_node *np)
{
- struct low_i2c_host *host = find_low_i2c_host(np);
+ struct pmac_i2c_bus *bus, *found = NULL;
- if (!host)
+ list_for_each_entry(bus, &pmac_i2c_busses, link) {
+ if (np == bus->controller) {
+ found = bus;
+ break;
+ }
+ }
+ if (!found)
return -ENODEV;
- down(&host->mutex);
- return 0;
+ return pmac_i2c_open(bus, 0);
}
-EXPORT_SYMBOL(pmac_low_i2c_lock);
+EXPORT_SYMBOL_GPL(pmac_low_i2c_lock);
int pmac_low_i2c_unlock(struct device_node *np)
{
- struct low_i2c_host *host = find_low_i2c_host(np);
+ struct pmac_i2c_bus *bus, *found = NULL;
- if (!host)
+ list_for_each_entry(bus, &pmac_i2c_busses, link) {
+ if (np == bus->controller) {
+ found = bus;
+ break;
+ }
+ }
+ if (!found)
return -ENODEV;
- up(&host->mutex);
+ pmac_i2c_close(bus);
return 0;
}
-EXPORT_SYMBOL(pmac_low_i2c_unlock);
+EXPORT_SYMBOL_GPL(pmac_low_i2c_unlock);
-int pmac_low_i2c_open(struct device_node *np, int channel)
+int pmac_i2c_open(struct pmac_i2c_bus *bus, int polled)
{
- struct low_i2c_host *host = find_low_i2c_host(np);
+ int rc;
+
+ down(&bus->sem);
+ bus->polled = polled || pmac_i2c_force_poll;
+ bus->opened = 1;
+ bus->mode = pmac_i2c_mode_std;
+ if (bus->open && (rc = bus->open(bus)) != 0) {
+ bus->opened = 0;
+ up(&bus->sem);
+ return rc;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_open);
- if (!host)
- return -ENODEV;
+void pmac_i2c_close(struct pmac_i2c_bus *bus)
+{
+ WARN_ON(!bus->opened);
+ if (bus->close)
+ bus->close(bus);
+ bus->opened = 0;
+ up(&bus->sem);
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_close);
- if (channel >= host->num_channels)
+int pmac_i2c_setmode(struct pmac_i2c_bus *bus, int mode)
+{
+ WARN_ON(!bus->opened);
+
+ /* Report me if you see the error below as there might be a new
+ * "combined4" mode that I need to implement for the SMU bus
+ */
+ if (mode < pmac_i2c_mode_dumb || mode > pmac_i2c_mode_combined) {
+ printk(KERN_ERR "low_i2c: Invalid mode %d requested on"
+ " bus %s !\n", mode, bus->busnode->full_name);
return -EINVAL;
-
- down(&host->mutex);
- host->is_open = 1;
- host->channel = channel;
+ }
+ bus->mode = mode;
return 0;
}
-EXPORT_SYMBOL(pmac_low_i2c_open);
+EXPORT_SYMBOL_GPL(pmac_i2c_setmode);
-int pmac_low_i2c_close(struct device_node *np)
+int pmac_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
+ u32 subaddr, u8 *data, int len)
{
- struct low_i2c_host *host = find_low_i2c_host(np);
+ int rc;
- if (!host)
- return -ENODEV;
+ WARN_ON(!bus->opened);
- host->is_open = 0;
- up(&host->mutex);
+ DBG("xfer() chan=%d, addrdir=0x%x, mode=%d, subsize=%d, subaddr=0x%x,"
+ " %d bytes, bus %s\n", bus->channel, addrdir, bus->mode, subsize,
+ subaddr, len, bus->busnode->full_name);
- return 0;
+ rc = bus->xfer(bus, addrdir, subsize, subaddr, data, len);
+
+#ifdef DEBUG
+ if (rc)
+ DBG("xfer error %d\n", rc);
+#endif
+ return rc;
}
-EXPORT_SYMBOL(pmac_low_i2c_close);
+EXPORT_SYMBOL_GPL(pmac_i2c_xfer);
+
+/* some quirks for platform function decoding */
+enum {
+ pmac_i2c_quirk_invmask = 0x00000001u,
+};
-int pmac_low_i2c_setmode(struct device_node *np, int mode)
+static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
+ int quirks))
{
- struct low_i2c_host *host = find_low_i2c_host(np);
+ struct pmac_i2c_bus *bus;
+ struct device_node *np;
+ static struct whitelist_ent {
+ char *name;
+ char *compatible;
+ int quirks;
+ } whitelist[] = {
+ /* XXX Study device-tree's & apple drivers are get the quirks
+ * right !
+ */
+ { "i2c-hwclock", NULL, pmac_i2c_quirk_invmask },
+ { "i2c-cpu-voltage", NULL, 0},
+ { "temp-monitor", NULL, 0 },
+ { "supply-monitor", NULL, 0 },
+ { NULL, NULL, 0 },
+ };
+
+ /* Only some devices need to have platform functions instanciated
+ * here. For now, we have a table. Others, like 9554 i2c GPIOs used
+ * on Xserve, if we ever do a driver for them, will use their own
+ * platform function instance
+ */
+ list_for_each_entry(bus, &pmac_i2c_busses, link) {
+ for (np = NULL;
+ (np = of_get_next_child(bus->busnode, np)) != NULL;) {
+ struct whitelist_ent *p;
+ /* If multibus, check if device is on that bus */
+ if (bus->flags & pmac_i2c_multibus)
+ if (bus != pmac_i2c_find_bus(np))
+ continue;
+ for (p = whitelist; p->name != NULL; p++) {
+ if (strcmp(np->name, p->name))
+ continue;
+ if (p->compatible &&
+ !device_is_compatible(np, p->compatible))
+ continue;
+ callback(np, p->quirks);
+ break;
+ }
+ }
+ }
+}
- if (!host)
- return -ENODEV;
- WARN_ON(!host->is_open);
- host->mode = mode;
+#define MAX_I2C_DATA 64
+
+struct pmac_i2c_pf_inst
+{
+ struct pmac_i2c_bus *bus;
+ u8 addr;
+ u8 buffer[MAX_I2C_DATA];
+ u8 scratch[MAX_I2C_DATA];
+ int bytes;
+ int quirks;
+};
+
+static void* pmac_i2c_do_begin(struct pmf_function *func, struct pmf_args *args)
+{
+ struct pmac_i2c_pf_inst *inst;
+ struct pmac_i2c_bus *bus;
+
+ bus = pmac_i2c_find_bus(func->node);
+ if (bus == NULL) {
+ printk(KERN_ERR "low_i2c: Can't find bus for %s (pfunc)\n",
+ func->node->full_name);
+ return NULL;
+ }
+ if (pmac_i2c_open(bus, 0)) {
+ printk(KERN_ERR "low_i2c: Can't open i2c bus for %s (pfunc)\n",
+ func->node->full_name);
+ return NULL;
+ }
+
+ /* XXX might need GFP_ATOMIC when called during the suspend process,
+ * but then, there are already lots of issues with suspending when
+ * near OOM that need to be resolved, the allocator itself should
+ * probably make GFP_NOIO implicit during suspend
+ */
+ inst = kzalloc(sizeof(struct pmac_i2c_pf_inst), GFP_KERNEL);
+ if (inst == NULL) {
+ pmac_i2c_close(bus);
+ return NULL;
+ }
+ inst->bus = bus;
+ inst->addr = pmac_i2c_get_dev_addr(func->node);
+ inst->quirks = (int)(long)func->driver_data;
+ return inst;
+}
+
+static void pmac_i2c_do_end(struct pmf_function *func, void *instdata)
+{
+ struct pmac_i2c_pf_inst *inst = instdata;
+
+ if (inst == NULL)
+ return;
+ pmac_i2c_close(inst->bus);
+ if (inst)
+ kfree(inst);
+}
+
+static int pmac_i2c_do_read(PMF_STD_ARGS, u32 len)
+{
+ struct pmac_i2c_pf_inst *inst = instdata;
+
+ inst->bytes = len;
+ return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_read, 0, 0,
+ inst->buffer, len);
+}
+
+static int pmac_i2c_do_write(PMF_STD_ARGS, u32 len, const u8 *data)
+{
+ struct pmac_i2c_pf_inst *inst = instdata;
+
+ return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 0, 0,
+ (u8 *)data, len);
+}
+
+/* This function is used to do the masking & OR'ing for the "rmw" type
+ * callbacks. Ze should apply the mask and OR in the values in the
+ * buffer before writing back. The problem is that it seems that
+ * various darwin drivers implement the mask/or differently, thus
+ * we need to check the quirks first
+ */
+static void pmac_i2c_do_apply_rmw(struct pmac_i2c_pf_inst *inst,
+ u32 len, const u8 *mask, const u8 *val)
+{
+ int i;
+
+ if (inst->quirks & pmac_i2c_quirk_invmask) {
+ for (i = 0; i < len; i ++)
+ inst->scratch[i] = (inst->buffer[i] & mask[i]) | val[i];
+ } else {
+ for (i = 0; i < len; i ++)
+ inst->scratch[i] = (inst->buffer[i] & ~mask[i])
+ | (val[i] & mask[i]);
+ }
+}
+
+static int pmac_i2c_do_rmw(PMF_STD_ARGS, u32 masklen, u32 valuelen,
+ u32 totallen, const u8 *maskdata,
+ const u8 *valuedata)
+{
+ struct pmac_i2c_pf_inst *inst = instdata;
+
+ if (masklen > inst->bytes || valuelen > inst->bytes ||
+ totallen > inst->bytes || valuelen > masklen)
+ return -EINVAL;
+
+ pmac_i2c_do_apply_rmw(inst, masklen, maskdata, valuedata);
+
+ return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 0, 0,
+ inst->scratch, totallen);
+}
+
+static int pmac_i2c_do_read_sub(PMF_STD_ARGS, u8 subaddr, u32 len)
+{
+ struct pmac_i2c_pf_inst *inst = instdata;
+
+ inst->bytes = len;
+ return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_read, 1, subaddr,
+ inst->buffer, len);
+}
+
+static int pmac_i2c_do_write_sub(PMF_STD_ARGS, u8 subaddr, u32 len,
+ const u8 *data)
+{
+ struct pmac_i2c_pf_inst *inst = instdata;
+
+ return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 1,
+ subaddr, (u8 *)data, len);
+}
+static int pmac_i2c_do_set_mode(PMF_STD_ARGS, int mode)
+{
+ struct pmac_i2c_pf_inst *inst = instdata;
+
+ return pmac_i2c_setmode(inst->bus, mode);
+}
+
+static int pmac_i2c_do_rmw_sub(PMF_STD_ARGS, u8 subaddr, u32 masklen,
+ u32 valuelen, u32 totallen, const u8 *maskdata,
+ const u8 *valuedata)
+{
+ struct pmac_i2c_pf_inst *inst = instdata;
+
+ if (masklen > inst->bytes || valuelen > inst->bytes ||
+ totallen > inst->bytes || valuelen > masklen)
+ return -EINVAL;
+
+ pmac_i2c_do_apply_rmw(inst, masklen, maskdata, valuedata);
+
+ return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 1,
+ subaddr, inst->scratch, totallen);
+}
+
+static int pmac_i2c_do_mask_and_comp(PMF_STD_ARGS, u32 len,
+ const u8 *maskdata,
+ const u8 *valuedata)
+{
+ struct pmac_i2c_pf_inst *inst = instdata;
+ int i, match;
+
+ /* Get return value pointer, it's assumed to be a u32 */
+ if (!args || !args->count || !args->u[0].p)
+ return -EINVAL;
+
+ /* Check buffer */
+ if (len > inst->bytes)
+ return -EINVAL;
+
+ for (i = 0, match = 1; match && i < len; i ++)
+ if ((inst->buffer[i] & maskdata[i]) != valuedata[i])
+ match = 0;
+ *args->u[0].p = match;
return 0;
}
-EXPORT_SYMBOL(pmac_low_i2c_setmode);
-int pmac_low_i2c_xfer(struct device_node *np, u8 addrdir, u8 subaddr, u8 *data, int len)
+static int pmac_i2c_do_delay(PMF_STD_ARGS, u32 duration)
{
- struct low_i2c_host *host = find_low_i2c_host(np);
+ msleep((duration + 999) / 1000);
+ return 0;
+}
- if (!host)
- return -ENODEV;
- WARN_ON(!host->is_open);
- return host->func(host, addrdir, subaddr, data, len);
+static struct pmf_handlers pmac_i2c_pfunc_handlers = {
+ .begin = pmac_i2c_do_begin,
+ .end = pmac_i2c_do_end,
+ .read_i2c = pmac_i2c_do_read,
+ .write_i2c = pmac_i2c_do_write,
+ .rmw_i2c = pmac_i2c_do_rmw,
+ .read_i2c_sub = pmac_i2c_do_read_sub,
+ .write_i2c_sub = pmac_i2c_do_write_sub,
+ .rmw_i2c_sub = pmac_i2c_do_rmw_sub,
+ .set_i2c_mode = pmac_i2c_do_set_mode,
+ .mask_and_compare = pmac_i2c_do_mask_and_comp,
+ .delay = pmac_i2c_do_delay,
+};
+
+static void __init pmac_i2c_dev_create(struct device_node *np, int quirks)
+{
+ DBG("dev_create(%s)\n", np->full_name);
+
+ pmf_register_driver(np, &pmac_i2c_pfunc_handlers,
+ (void *)(long)quirks);
+}
+
+static void __init pmac_i2c_dev_init(struct device_node *np, int quirks)
+{
+ DBG("dev_create(%s)\n", np->full_name);
+
+ pmf_do_functions(np, NULL, 0, PMF_FLAGS_ON_INIT, NULL);
+}
+
+static void pmac_i2c_dev_suspend(struct device_node *np, int quirks)
+{
+ DBG("dev_suspend(%s)\n", np->full_name);
+ pmf_do_functions(np, NULL, 0, PMF_FLAGS_ON_SLEEP, NULL);
+}
+
+static void pmac_i2c_dev_resume(struct device_node *np, int quirks)
+{
+ DBG("dev_resume(%s)\n", np->full_name);
+ pmf_do_functions(np, NULL, 0, PMF_FLAGS_ON_WAKE, NULL);
+}
+
+void pmac_pfunc_i2c_suspend(void)
+{
+ pmac_i2c_devscan(pmac_i2c_dev_suspend);
+}
+
+void pmac_pfunc_i2c_resume(void)
+{
+ pmac_i2c_devscan(pmac_i2c_dev_resume);
+}
+
+/*
+ * Initialize us: probe all i2c busses on the machine, instantiate
+ * busses and platform functions as needed.
+ */
+/* This is non-static as it might be called early by smp code */
+int __init pmac_i2c_init(void)
+{
+ static int i2c_inited;
+
+ if (i2c_inited)
+ return 0;
+ i2c_inited = 1;
+
+ /* Probe keywest-i2c busses */
+ kw_i2c_probe();
+
+#ifdef CONFIG_ADB_PMU
+ /* Probe PMU i2c busses */
+ pmu_i2c_probe();
+#endif
+
+#ifdef CONFIG_PMAC_SMU
+ /* Probe SMU i2c busses */
+ smu_i2c_probe();
+#endif
+
+ /* Now add plaform functions for some known devices */
+ pmac_i2c_devscan(pmac_i2c_dev_create);
+
+ return 0;
}
-EXPORT_SYMBOL(pmac_low_i2c_xfer);
+arch_initcall(pmac_i2c_init);
+
+/* Since pmac_i2c_init can be called too early for the platform device
+ * registration, we need to do it at a later time. In our case, subsys
+ * happens to fit well, though I agree it's a bit of a hack...
+ */
+static int __init pmac_i2c_create_platform_devices(void)
+{
+ struct pmac_i2c_bus *bus;
+ int i = 0;
+
+ /* In the case where we are initialized from smp_init(), we must
+ * not use the timer (and thus the irq). It's safe from now on
+ * though
+ */
+ pmac_i2c_force_poll = 0;
+
+ /* Create platform devices */
+ list_for_each_entry(bus, &pmac_i2c_busses, link) {
+ bus->platform_dev =
+ platform_device_alloc("i2c-powermac", i++);
+ if (bus->platform_dev == NULL)
+ return -ENOMEM;
+ bus->platform_dev->dev.platform_data = bus;
+ platform_device_add(bus->platform_dev);
+ }
+
+ /* Now call platform "init" functions */
+ pmac_i2c_devscan(pmac_i2c_dev_init);
+ return 0;
+}
+subsys_initcall(pmac_i2c_create_platform_devices);
diff --git a/arch/powerpc/platforms/powermac/nvram.c b/arch/powerpc/platforms/powermac/nvram.c
index 4042e2f06ee0..3ebd045a3350 100644
--- a/arch/powerpc/platforms/powermac/nvram.c
+++ b/arch/powerpc/platforms/powermac/nvram.c
@@ -514,7 +514,7 @@ static void core99_nvram_sync(void)
#endif
}
-static int __init core99_nvram_setup(struct device_node *dp)
+static int __init core99_nvram_setup(struct device_node *dp, unsigned long addr)
{
int i;
u32 gen_bank0, gen_bank1;
@@ -528,7 +528,7 @@ static int __init core99_nvram_setup(struct device_node *dp)
printk(KERN_ERR "nvram: can't allocate ram image\n");
return -ENOMEM;
}
- nvram_data = ioremap(dp->addrs[0].address, NVRAM_SIZE*2);
+ nvram_data = ioremap(addr, NVRAM_SIZE*2);
nvram_naddrs = 1; /* Make sure we get the correct case */
DBG("nvram: Checking bank 0...\n");
@@ -549,6 +549,7 @@ static int __init core99_nvram_setup(struct device_node *dp)
ppc_md.nvram_write = core99_nvram_write;
ppc_md.nvram_size = core99_nvram_size;
ppc_md.nvram_sync = core99_nvram_sync;
+ ppc_md.machine_shutdown = core99_nvram_sync;
/*
* Maybe we could be smarter here though making an exclusive list
* of known flash chips is a bit nasty as older OF didn't provide us
@@ -569,34 +570,48 @@ static int __init core99_nvram_setup(struct device_node *dp)
int __init pmac_nvram_init(void)
{
struct device_node *dp;
+ struct resource r1, r2;
+ unsigned int s1 = 0, s2 = 0;
int err = 0;
nvram_naddrs = 0;
- dp = find_devices("nvram");
+ dp = of_find_node_by_name(NULL, "nvram");
if (dp == NULL) {
printk(KERN_ERR "Can't find NVRAM device\n");
return -ENODEV;
}
- nvram_naddrs = dp->n_addrs;
+
+ /* Try to obtain an address */
+ if (of_address_to_resource(dp, 0, &r1) == 0) {
+ nvram_naddrs = 1;
+ s1 = (r1.end - r1.start) + 1;
+ if (of_address_to_resource(dp, 1, &r2) == 0) {
+ nvram_naddrs = 2;
+ s2 = (r2.end - r2.start) + 1;
+ }
+ }
+
is_core_99 = device_is_compatible(dp, "nvram,flash");
- if (is_core_99)
- err = core99_nvram_setup(dp);
+ if (is_core_99) {
+ err = core99_nvram_setup(dp, r1.start);
+ goto bail;
+ }
+
#ifdef CONFIG_PPC32
- else if (_machine == _MACH_chrp && nvram_naddrs == 1) {
- nvram_data = ioremap(dp->addrs[0].address + isa_mem_base,
- dp->addrs[0].size);
+ if (_machine == _MACH_chrp && nvram_naddrs == 1) {
+ nvram_data = ioremap(r1.start, s1);
nvram_mult = 1;
ppc_md.nvram_read_val = direct_nvram_read_byte;
ppc_md.nvram_write_val = direct_nvram_write_byte;
} else if (nvram_naddrs == 1) {
- nvram_data = ioremap(dp->addrs[0].address, dp->addrs[0].size);
- nvram_mult = (dp->addrs[0].size + NVRAM_SIZE - 1) / NVRAM_SIZE;
+ nvram_data = ioremap(r1.start, s1);
+ nvram_mult = (s1 + NVRAM_SIZE - 1) / NVRAM_SIZE;
ppc_md.nvram_read_val = direct_nvram_read_byte;
ppc_md.nvram_write_val = direct_nvram_write_byte;
} else if (nvram_naddrs == 2) {
- nvram_addr = ioremap(dp->addrs[0].address, dp->addrs[0].size);
- nvram_data = ioremap(dp->addrs[1].address, dp->addrs[1].size);
+ nvram_addr = ioremap(r1.start, s1);
+ nvram_data = ioremap(r2.start, s2);
ppc_md.nvram_read_val = indirect_nvram_read_byte;
ppc_md.nvram_write_val = indirect_nvram_write_byte;
} else if (nvram_naddrs == 0 && sys_ctrler == SYS_CTRLER_PMU) {
@@ -605,13 +620,15 @@ int __init pmac_nvram_init(void)
ppc_md.nvram_read_val = pmu_nvram_read_byte;
ppc_md.nvram_write_val = pmu_nvram_write_byte;
#endif /* CONFIG_ADB_PMU */
- }
-#endif
- else {
+ } else {
printk(KERN_ERR "Incompatible type of NVRAM\n");
- return -ENXIO;
+ err = -ENXIO;
}
- lookup_partitions();
+#endif /* CONFIG_PPC32 */
+bail:
+ of_node_put(dp);
+ if (err == 0)
+ lookup_partitions();
return err;
}
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 443be526cde7..f671ed253901 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -1,7 +1,7 @@
/*
* Support for PCI bridges found on Power Macintoshes.
*
- * Copyright (C) 2003 Benjamin Herrenschmuidt (benh@kernel.crashing.org)
+ * Copyright (C) 2003-2005 Benjamin Herrenschmuidt (benh@kernel.crashing.org)
* Copyright (C) 1997 Paul Mackerras (paulus@samba.org)
*
* This program is free software; you can redistribute it and/or
@@ -25,7 +25,7 @@
#include <asm/pmac_feature.h>
#include <asm/grackle.h>
#ifdef CONFIG_PPC64
-#include <asm/iommu.h>
+//#include <asm/iommu.h>
#include <asm/ppc-pci.h>
#endif
@@ -44,6 +44,7 @@ static int add_bridge(struct device_node *dev);
static int has_uninorth;
#ifdef CONFIG_PPC64
static struct pci_controller *u3_agp;
+static struct pci_controller *u4_pcie;
static struct pci_controller *u3_ht;
#endif /* CONFIG_PPC64 */
@@ -97,11 +98,8 @@ static void __init fixup_bus_range(struct device_node *bridge)
/* Lookup the "bus-range" property for the hose */
bus_range = (int *) get_property(bridge, "bus-range", &len);
- if (bus_range == NULL || len < 2 * sizeof(int)) {
- printk(KERN_WARNING "Can't get bus-range for %s\n",
- bridge->full_name);
+ if (bus_range == NULL || len < 2 * sizeof(int))
return;
- }
bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]);
}
@@ -128,14 +126,14 @@ static void __init fixup_bus_range(struct device_node *bridge)
*/
#define MACRISC_CFA0(devfn, off) \
- ((1 << (unsigned long)PCI_SLOT(dev_fn)) \
- | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \
- | (((unsigned long)(off)) & 0xFCUL))
+ ((1 << (unsigned int)PCI_SLOT(dev_fn)) \
+ | (((unsigned int)PCI_FUNC(dev_fn)) << 8) \
+ | (((unsigned int)(off)) & 0xFCUL))
#define MACRISC_CFA1(bus, devfn, off) \
- ((((unsigned long)(bus)) << 16) \
- |(((unsigned long)(devfn)) << 8) \
- |(((unsigned long)(off)) & 0xFCUL) \
+ ((((unsigned int)(bus)) << 16) \
+ |(((unsigned int)(devfn)) << 8) \
+ |(((unsigned int)(off)) & 0xFCUL) \
|1UL)
static unsigned long macrisc_cfg_access(struct pci_controller* hose,
@@ -168,7 +166,8 @@ static int macrisc_read_config(struct pci_bus *bus, unsigned int devfn,
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
-
+ if (offset >= 0x100)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
addr = macrisc_cfg_access(hose, bus->number, devfn, offset);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -199,7 +198,8 @@ static int macrisc_write_config(struct pci_bus *bus, unsigned int devfn,
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
-
+ if (offset >= 0x100)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
addr = macrisc_cfg_access(hose, bus->number, devfn, offset);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -234,12 +234,13 @@ static struct pci_ops macrisc_pci_ops =
/*
* Verify that a specific (bus, dev_fn) exists on chaos
*/
-static int
-chaos_validate_dev(struct pci_bus *bus, int devfn, int offset)
+static int chaos_validate_dev(struct pci_bus *bus, int devfn, int offset)
{
struct device_node *np;
u32 *vendor, *device;
+ if (offset >= 0x100)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
np = pci_busdev_to_OF_node(bus, devfn);
if (np == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -285,15 +286,13 @@ static struct pci_ops chaos_pci_ops =
};
static void __init setup_chaos(struct pci_controller *hose,
- struct reg_property *addr)
+ struct resource *addr)
{
/* assume a `chaos' bridge */
hose->ops = &chaos_pci_ops;
- hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000);
- hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000);
+ hose->cfg_addr = ioremap(addr->start + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(addr->start + 0xc00000, 0x1000);
}
-#else
-#define setup_chaos(hose, addr)
#endif /* CONFIG_PPC32 */
#ifdef CONFIG_PPC64
@@ -326,7 +325,7 @@ static int u3_ht_skip_device(struct pci_controller *hose,
else
busdn = hose->arch_data;
for (dn = busdn->child; dn; dn = dn->sibling)
- if (dn->data && PCI_DN(dn)->devfn == devfn)
+ if (PCI_DN(dn) && PCI_DN(dn)->devfn == devfn)
break;
if (dn == NULL)
return -1;
@@ -343,10 +342,10 @@ static int u3_ht_skip_device(struct pci_controller *hose,
}
#define U3_HT_CFA0(devfn, off) \
- ((((unsigned long)devfn) << 8) | offset)
+ ((((unsigned int)devfn) << 8) | offset)
#define U3_HT_CFA1(bus, devfn, off) \
(U3_HT_CFA0(devfn, off) \
- + (((unsigned long)bus) << 16) \
+ + (((unsigned int)bus) << 16) \
+ 0x01000000UL)
static unsigned long u3_ht_cfg_access(struct pci_controller* hose,
@@ -356,9 +355,11 @@ static unsigned long u3_ht_cfg_access(struct pci_controller* hose,
/* For now, we don't self probe U3 HT bridge */
if (PCI_SLOT(devfn) == 0)
return 0;
- return ((unsigned long)hose->cfg_data) + U3_HT_CFA0(devfn, offset);
+ return ((unsigned long)hose->cfg_data) +
+ U3_HT_CFA0(devfn, offset);
} else
- return ((unsigned long)hose->cfg_data) + U3_HT_CFA1(bus, devfn, offset);
+ return ((unsigned long)hose->cfg_data) +
+ U3_HT_CFA1(bus, devfn, offset);
}
static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
@@ -370,7 +371,8 @@ static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
-
+ if (offset >= 0x100)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -419,7 +421,8 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn,
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
-
+ if (offset >= 0x100)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -459,6 +462,112 @@ static struct pci_ops u3_ht_pci_ops =
u3_ht_read_config,
u3_ht_write_config
};
+
+#define U4_PCIE_CFA0(devfn, off) \
+ ((1 << ((unsigned int)PCI_SLOT(dev_fn))) \
+ | (((unsigned int)PCI_FUNC(dev_fn)) << 8) \
+ | ((((unsigned int)(off)) >> 8) << 28) \
+ | (((unsigned int)(off)) & 0xfcU))
+
+#define U4_PCIE_CFA1(bus, devfn, off) \
+ ((((unsigned int)(bus)) << 16) \
+ |(((unsigned int)(devfn)) << 8) \
+ | ((((unsigned int)(off)) >> 8) << 28) \
+ |(((unsigned int)(off)) & 0xfcU) \
+ |1UL)
+
+static unsigned long u4_pcie_cfg_access(struct pci_controller* hose,
+ u8 bus, u8 dev_fn, int offset)
+{
+ unsigned int caddr;
+
+ if (bus == hose->first_busno) {
+ caddr = U4_PCIE_CFA0(dev_fn, offset);
+ } else
+ caddr = U4_PCIE_CFA1(bus, dev_fn, offset);
+
+ /* Uninorth will return garbage if we don't read back the value ! */
+ do {
+ out_le32(hose->cfg_addr, caddr);
+ } while (in_le32(hose->cfg_addr) != caddr);
+
+ offset &= 0x03;
+ return ((unsigned long)hose->cfg_data) + offset;
+}
+
+static int u4_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct pci_controller *hose;
+ unsigned long addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (offset >= 0x1000)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ *val = in_8((u8 *)addr);
+ break;
+ case 2:
+ *val = in_le16((u16 *)addr);
+ break;
+ default:
+ *val = in_le32((u32 *)addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose;
+ unsigned long addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (offset >= 0x1000)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ out_8((u8 *)addr, val);
+ (void) in_8((u8 *)addr);
+ break;
+ case 2:
+ out_le16((u16 *)addr, val);
+ (void) in_le16((u16 *)addr);
+ break;
+ default:
+ out_le32((u32 *)addr, val);
+ (void) in_le32((u32 *)addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops u4_pcie_pci_ops =
+{
+ u4_pcie_read_config,
+ u4_pcie_write_config
+};
+
#endif /* CONFIG_PPC64 */
#ifdef CONFIG_PPC32
@@ -532,7 +641,8 @@ static void __init init_p2pbridge(void)
}
if (early_read_config_word(hose, bus, devfn,
PCI_BRIDGE_CONTROL, &val) < 0) {
- printk(KERN_ERR "init_p2pbridge: couldn't read bridge control\n");
+ printk(KERN_ERR "init_p2pbridge: couldn't read bridge"
+ " control\n");
return;
}
val &= ~PCI_BRIDGE_CTL_MASTER_ABORT;
@@ -576,36 +686,38 @@ static void __init fixup_nec_usb2(void)
continue;
early_read_config_dword(hose, bus, devfn, 0xe4, &data);
if (data & 1UL) {
- printk("Found NEC PD720100A USB2 chip with disabled EHCI, fixing up...\n");
+ printk("Found NEC PD720100A USB2 chip with disabled"
+ " EHCI, fixing up...\n");
data &= ~1UL;
early_write_config_dword(hose, bus, devfn, 0xe4, data);
- early_write_config_byte(hose, bus, devfn | 2, PCI_INTERRUPT_LINE,
+ early_write_config_byte(hose, bus,
+ devfn | 2, PCI_INTERRUPT_LINE,
nec->intrs[0].line);
}
}
}
static void __init setup_bandit(struct pci_controller *hose,
- struct reg_property *addr)
+ struct resource *addr)
{
hose->ops = &macrisc_pci_ops;
- hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000);
- hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000);
+ hose->cfg_addr = ioremap(addr->start + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(addr->start + 0xc00000, 0x1000);
init_bandit(hose);
}
static int __init setup_uninorth(struct pci_controller *hose,
- struct reg_property *addr)
+ struct resource *addr)
{
pci_assign_all_buses = 1;
has_uninorth = 1;
hose->ops = &macrisc_pci_ops;
- hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000);
- hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000);
+ hose->cfg_addr = ioremap(addr->start + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(addr->start + 0xc00000, 0x1000);
/* We "know" that the bridge at f2000000 has the PCI slots. */
- return addr->address == 0xf2000000;
+ return addr->start == 0xf2000000;
}
-#endif
+#endif /* CONFIG_PPC32 */
#ifdef CONFIG_PPC64
static void __init setup_u3_agp(struct pci_controller* hose)
@@ -625,15 +737,36 @@ static void __init setup_u3_agp(struct pci_controller* hose)
hose->ops = &macrisc_pci_ops;
hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
-
u3_agp = hose;
}
+static void __init setup_u4_pcie(struct pci_controller* hose)
+{
+ /* We currently only implement the "non-atomic" config space, to
+ * be optimised later.
+ */
+ hose->ops = &u4_pcie_pci_ops;
+ hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
+
+ /* The bus contains a bridge from root -> device, we need to
+ * make it visible on bus 0 so that we pick the right type
+ * of config cycles. If we didn't, we would have to force all
+ * config cycles to be type 1. So we override the "bus-range"
+ * property here
+ */
+ hose->first_busno = 0x00;
+ hose->last_busno = 0xff;
+ u4_pcie = hose;
+}
+
static void __init setup_u3_ht(struct pci_controller* hose)
{
struct device_node *np = (struct device_node *)hose->arch_data;
+ struct pci_controller *other = NULL;
int i, cur;
+
hose->ops = &u3_ht_pci_ops;
/* We hard code the address because of the different size of
@@ -667,11 +800,20 @@ static void __init setup_u3_ht(struct pci_controller* hose)
u3_ht = hose;
- if (u3_agp == NULL) {
- DBG("U3 has no AGP, using full resource range\n");
+ if (u3_agp != NULL)
+ other = u3_agp;
+ else if (u4_pcie != NULL)
+ other = u4_pcie;
+
+ if (other == NULL) {
+ DBG("U3/4 has no AGP/PCIE, using full resource range\n");
return;
}
+ /* Fixup bus range vs. PCIE */
+ if (u4_pcie)
+ hose->last_busno = u4_pcie->first_busno - 1;
+
/* We "remove" the AGP resources from the resources allocated to HT,
* that is we create "holes". However, that code does assumptions
* that so far happen to be true (cross fingers...), typically that
@@ -679,7 +821,7 @@ static void __init setup_u3_ht(struct pci_controller* hose)
*/
cur = 0;
for (i=0; i<3; i++) {
- struct resource *res = &u3_agp->mem_resources[i];
+ struct resource *res = &other->mem_resources[i];
if (res->flags != IORESOURCE_MEM)
continue;
/* We don't care about "fine" resources */
@@ -722,7 +864,7 @@ static void __init setup_u3_ht(struct pci_controller* hose)
hose->mem_resources[cur-1].end = res->start - 1;
}
}
-#endif
+#endif /* CONFIG_PPC64 */
/*
* We assume that if we have a G3 powermac, we have one bridge called
@@ -733,24 +875,17 @@ static int __init add_bridge(struct device_node *dev)
{
int len;
struct pci_controller *hose;
-#ifdef CONFIG_PPC32
- struct reg_property *addr;
-#endif
+ struct resource rsrc;
char *disp_name;
int *bus_range;
- int primary = 1;
+ int primary = 1, has_address = 0;
DBG("Adding PCI host bridge %s\n", dev->full_name);
-#ifdef CONFIG_PPC32
- /* XXX fix this */
- addr = (struct reg_property *) get_property(dev, "reg", &len);
- if (addr == NULL || len < sizeof(*addr)) {
- printk(KERN_WARNING "Can't use %s: no address\n",
- dev->full_name);
- return -ENODEV;
- }
-#endif
+ /* Fetch host bridge registers address */
+ has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
+
+ /* Get bus range if any */
bus_range = (int *) get_property(dev, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int)) {
printk(KERN_WARNING "Can't get bus-range for %s, assume"
@@ -770,6 +905,8 @@ static int __init add_bridge(struct device_node *dev)
hose->last_busno = bus_range ? bus_range[1] : 0xff;
disp_name = NULL;
+
+ /* 64 bits only bridges */
#ifdef CONFIG_PPC64
if (device_is_compatible(dev, "u3-agp")) {
setup_u3_agp(hose);
@@ -779,28 +916,37 @@ static int __init add_bridge(struct device_node *dev)
setup_u3_ht(hose);
disp_name = "U3-HT";
primary = 1;
+ } else if (device_is_compatible(dev, "u4-pcie")) {
+ setup_u4_pcie(hose);
+ disp_name = "U4-PCIE";
+ primary = 0;
}
- printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n",
- disp_name, hose->first_busno, hose->last_busno);
-#else
+ printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number:"
+ " %d->%d\n", disp_name, hose->first_busno, hose->last_busno);
+#endif /* CONFIG_PPC64 */
+
+ /* 32 bits only bridges */
+#ifdef CONFIG_PPC32
if (device_is_compatible(dev, "uni-north")) {
- primary = setup_uninorth(hose, addr);
+ primary = setup_uninorth(hose, &rsrc);
disp_name = "UniNorth";
} else if (strcmp(dev->name, "pci") == 0) {
/* XXX assume this is a mpc106 (grackle) */
setup_grackle(hose);
disp_name = "Grackle (MPC106)";
} else if (strcmp(dev->name, "bandit") == 0) {
- setup_bandit(hose, addr);
+ setup_bandit(hose, &rsrc);
disp_name = "Bandit";
} else if (strcmp(dev->name, "chaos") == 0) {
- setup_chaos(hose, addr);
+ setup_chaos(hose, &rsrc);
disp_name = "Chaos";
primary = 0;
}
- printk(KERN_INFO "Found %s PCI host bridge at 0x%08lx. Firmware bus number: %d->%d\n",
- disp_name, addr->address, hose->first_busno, hose->last_busno);
-#endif
+ printk(KERN_INFO "Found %s PCI host bridge at 0x%08lx. "
+ "Firmware bus number: %d->%d\n",
+ disp_name, rsrc.start, hose->first_busno, hose->last_busno);
+#endif /* CONFIG_PPC32 */
+
DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
hose, hose->cfg_addr, hose->cfg_data);
@@ -814,8 +960,7 @@ static int __init add_bridge(struct device_node *dev)
return 0;
}
-static void __init
-pcibios_fixup_OF_interrupts(void)
+static void __init pcibios_fixup_OF_interrupts(void)
{
struct pci_dev* dev = NULL;
@@ -835,8 +980,7 @@ pcibios_fixup_OF_interrupts(void)
}
}
-void __init
-pmac_pcibios_fixup(void)
+void __init pmac_pcibios_fixup(void)
{
/* Fixup interrupts according to OF tree */
pcibios_fixup_OF_interrupts();
@@ -899,6 +1043,8 @@ void __init pmac_pci_init(void)
pci_setup_phb_io(u3_ht, 1);
if (u3_agp)
pci_setup_phb_io(u3_agp, 0);
+ if (u4_pcie)
+ pci_setup_phb_io(u4_pcie, 0);
/*
* On ppc64, fixup the IO resources on our host bridges as
@@ -911,7 +1057,8 @@ void __init pmac_pci_init(void)
/* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
* assume there is no P2P bridge on the AGP bus, which should be a
- * safe assumptions hopefully.
+ * safe assumptions for now. We should do something better in the
+ * future though
*/
if (u3_agp) {
struct device_node *np = u3_agp->arch_data;
@@ -919,7 +1066,6 @@ void __init pmac_pci_init(void)
for (np = np->child; np; np = np->sibling)
PCI_DN(np)->busno = 0xf0;
}
-
/* pmac_check_ht_link(); */
/* Tell pci.c to not use the common resource allocation mechanism */
@@ -1126,7 +1272,8 @@ void pmac_pci_fixup_pciata(struct pci_dev* dev)
good:
pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
if ((progif & 5) != 5) {
- printk(KERN_INFO "Forcing PCI IDE into native mode: %s\n", pci_name(dev));
+ printk(KERN_INFO "Forcing PCI IDE into native mode: %s\n",
+ pci_name(dev));
(void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5);
if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
(progif & 5) != 5)
@@ -1152,7 +1299,8 @@ static void fixup_k2_sata(struct pci_dev* dev)
for (i = 0; i < 6; i++) {
dev->resource[i].start = dev->resource[i].end = 0;
dev->resource[i].flags = 0;
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i,
+ 0);
}
} else {
pci_read_config_word(dev, PCI_COMMAND, &cmd);
@@ -1161,7 +1309,8 @@ static void fixup_k2_sata(struct pci_dev* dev)
for (i = 0; i < 5; i++) {
dev->resource[i].start = dev->resource[i].end = 0;
dev->resource[i].flags = 0;
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i,
+ 0);
}
}
}
diff --git a/arch/powerpc/platforms/powermac/pfunc_base.c b/arch/powerpc/platforms/powermac/pfunc_base.c
new file mode 100644
index 000000000000..4ffd2a9832a0
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pfunc_base.c
@@ -0,0 +1,405 @@
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+
+#include <asm/pmac_feature.h>
+#include <asm/pmac_pfunc.h>
+
+#define DBG(fmt...) printk(fmt)
+
+static irqreturn_t macio_gpio_irq(int irq, void *data, struct pt_regs *regs)
+{
+ pmf_do_irq(data);
+
+ return IRQ_HANDLED;
+}
+
+static int macio_do_gpio_irq_enable(struct pmf_function *func)
+{
+ if (func->node->n_intrs < 1)
+ return -EINVAL;
+
+ return request_irq(func->node->intrs[0].line, macio_gpio_irq, 0,
+ func->node->name, func);
+}
+
+static int macio_do_gpio_irq_disable(struct pmf_function *func)
+{
+ if (func->node->n_intrs < 1)
+ return -EINVAL;
+
+ free_irq(func->node->intrs[0].line, func);
+ return 0;
+}
+
+static int macio_do_gpio_write(PMF_STD_ARGS, u8 value, u8 mask)
+{
+ u8 __iomem *addr = (u8 __iomem *)func->driver_data;
+ unsigned long flags;
+ u8 tmp;
+
+ /* Check polarity */
+ if (args && args->count && !args->u[0].v)
+ value = ~value;
+
+ /* Toggle the GPIO */
+ spin_lock_irqsave(&feature_lock, flags);
+ tmp = readb(addr);
+ tmp = (tmp & ~mask) | (value & mask);
+ DBG("Do write 0x%02x to GPIO %s (%p)\n",
+ tmp, func->node->full_name, addr);
+ writeb(tmp, addr);
+ spin_unlock_irqrestore(&feature_lock, flags);
+
+ return 0;
+}
+
+static int macio_do_gpio_read(PMF_STD_ARGS, u8 mask, int rshift, u8 xor)
+{
+ u8 __iomem *addr = (u8 __iomem *)func->driver_data;
+ u32 value;
+
+ /* Check if we have room for reply */
+ if (args == NULL || args->count == 0 || args->u[0].p == NULL)
+ return -EINVAL;
+
+ value = readb(addr);
+ *args->u[0].p = ((value & mask) >> rshift) ^ xor;
+
+ return 0;
+}
+
+static int macio_do_delay(PMF_STD_ARGS, u32 duration)
+{
+ /* assume we can sleep ! */
+ msleep((duration + 999) / 1000);
+ return 0;
+}
+
+static struct pmf_handlers macio_gpio_handlers = {
+ .irq_enable = macio_do_gpio_irq_enable,
+ .irq_disable = macio_do_gpio_irq_disable,
+ .write_gpio = macio_do_gpio_write,
+ .read_gpio = macio_do_gpio_read,
+ .delay = macio_do_delay,
+};
+
+static void macio_gpio_init_one(struct macio_chip *macio)
+{
+ struct device_node *gparent, *gp;
+
+ /*
+ * Find the "gpio" parent node
+ */
+
+ for (gparent = NULL;
+ (gparent = of_get_next_child(macio->of_node, gparent)) != NULL;)
+ if (strcmp(gparent->name, "gpio") == 0)
+ break;
+ if (gparent == NULL)
+ return;
+
+ DBG("Installing GPIO functions for macio %s\n",
+ macio->of_node->full_name);
+
+ /*
+ * Ok, got one, we dont need anything special to track them down, so
+ * we just create them all
+ */
+ for (gp = NULL; (gp = of_get_next_child(gparent, gp)) != NULL;) {
+ u32 *reg = (u32 *)get_property(gp, "reg", NULL);
+ unsigned long offset;
+ if (reg == NULL)
+ continue;
+ offset = *reg;
+ /* Deal with old style device-tree. We can safely hard code the
+ * offset for now too even if it's a bit gross ...
+ */
+ if (offset < 0x50)
+ offset += 0x50;
+ offset += (unsigned long)macio->base;
+ pmf_register_driver(gp, &macio_gpio_handlers, (void *)offset);
+ }
+
+ DBG("Calling initial GPIO functions for macio %s\n",
+ macio->of_node->full_name);
+
+ /* And now we run all the init ones */
+ for (gp = NULL; (gp = of_get_next_child(gparent, gp)) != NULL;)
+ pmf_do_functions(gp, NULL, 0, PMF_FLAGS_ON_INIT, NULL);
+
+ /* Note: We do not at this point implement the "at sleep" or "at wake"
+ * functions. I yet to find any for GPIOs anyway
+ */
+}
+
+static int macio_do_write_reg32(PMF_STD_ARGS, u32 offset, u32 value, u32 mask)
+{
+ struct macio_chip *macio = func->driver_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&feature_lock, flags);
+ MACIO_OUT32(offset, (MACIO_IN32(offset) & ~mask) | (value & mask));
+ spin_unlock_irqrestore(&feature_lock, flags);
+ return 0;
+}
+
+static int macio_do_read_reg32(PMF_STD_ARGS, u32 offset)
+{
+ struct macio_chip *macio = func->driver_data;
+
+ /* Check if we have room for reply */
+ if (args == NULL || args->count == 0 || args->u[0].p == NULL)
+ return -EINVAL;
+
+ *args->u[0].p = MACIO_IN32(offset);
+ return 0;
+}
+
+static int macio_do_write_reg8(PMF_STD_ARGS, u32 offset, u8 value, u8 mask)
+{
+ struct macio_chip *macio = func->driver_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&feature_lock, flags);
+ MACIO_OUT8(offset, (MACIO_IN8(offset) & ~mask) | (value & mask));
+ spin_unlock_irqrestore(&feature_lock, flags);
+ return 0;
+}
+
+static int macio_do_read_reg8(PMF_STD_ARGS, u32 offset)
+{
+ struct macio_chip *macio = func->driver_data;
+
+ /* Check if we have room for reply */
+ if (args == NULL || args->count == 0 || args->u[0].p == NULL)
+ return -EINVAL;
+
+ *((u8 *)(args->u[0].p)) = MACIO_IN8(offset);
+ return 0;
+}
+
+static int macio_do_read_reg32_msrx(PMF_STD_ARGS, u32 offset, u32 mask,
+ u32 shift, u32 xor)
+{
+ struct macio_chip *macio = func->driver_data;
+
+ /* Check if we have room for reply */
+ if (args == NULL || args->count == 0 || args->u[0].p == NULL)
+ return -EINVAL;
+
+ *args->u[0].p = ((MACIO_IN32(offset) & mask) >> shift) ^ xor;
+ return 0;
+}
+
+static int macio_do_read_reg8_msrx(PMF_STD_ARGS, u32 offset, u32 mask,
+ u32 shift, u32 xor)
+{
+ struct macio_chip *macio = func->driver_data;
+
+ /* Check if we have room for reply */
+ if (args == NULL || args->count == 0 || args->u[0].p == NULL)
+ return -EINVAL;
+
+ *((u8 *)(args->u[0].p)) = ((MACIO_IN8(offset) & mask) >> shift) ^ xor;
+ return 0;
+}
+
+static int macio_do_write_reg32_slm(PMF_STD_ARGS, u32 offset, u32 shift,
+ u32 mask)
+{
+ struct macio_chip *macio = func->driver_data;
+ unsigned long flags;
+ u32 tmp, val;
+
+ /* Check args */
+ if (args == NULL || args->count == 0)
+ return -EINVAL;
+
+ spin_lock_irqsave(&feature_lock, flags);
+ tmp = MACIO_IN32(offset);
+ val = args->u[0].v << shift;
+ tmp = (tmp & ~mask) | (val & mask);
+ MACIO_OUT32(offset, tmp);
+ spin_unlock_irqrestore(&feature_lock, flags);
+ return 0;
+}
+
+static int macio_do_write_reg8_slm(PMF_STD_ARGS, u32 offset, u32 shift,
+ u32 mask)
+{
+ struct macio_chip *macio = func->driver_data;
+ unsigned long flags;
+ u32 tmp, val;
+
+ /* Check args */
+ if (args == NULL || args->count == 0)
+ return -EINVAL;
+
+ spin_lock_irqsave(&feature_lock, flags);
+ tmp = MACIO_IN8(offset);
+ val = args->u[0].v << shift;
+ tmp = (tmp & ~mask) | (val & mask);
+ MACIO_OUT8(offset, tmp);
+ spin_unlock_irqrestore(&feature_lock, flags);
+ return 0;
+}
+
+static struct pmf_handlers macio_mmio_handlers = {
+ .write_reg32 = macio_do_write_reg32,
+ .read_reg32 = macio_do_read_reg32,
+ .write_reg8 = macio_do_write_reg8,
+ .read_reg32 = macio_do_read_reg8,
+ .read_reg32_msrx = macio_do_read_reg32_msrx,
+ .read_reg8_msrx = macio_do_read_reg8_msrx,
+ .write_reg32_slm = macio_do_write_reg32_slm,
+ .write_reg8_slm = macio_do_write_reg8_slm,
+ .delay = macio_do_delay,
+};
+
+static void macio_mmio_init_one(struct macio_chip *macio)
+{
+ DBG("Installing MMIO functions for macio %s\n",
+ macio->of_node->full_name);
+
+ pmf_register_driver(macio->of_node, &macio_mmio_handlers, macio);
+}
+
+static struct device_node *unin_hwclock;
+
+static int unin_do_write_reg32(PMF_STD_ARGS, u32 offset, u32 value, u32 mask)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&feature_lock, flags);
+ /* This is fairly bogus in darwin, but it should work for our needs
+ * implemeted that way:
+ */
+ UN_OUT(offset, (UN_IN(offset) & ~mask) | (value & mask));
+ spin_unlock_irqrestore(&feature_lock, flags);
+ return 0;
+}
+
+
+static struct pmf_handlers unin_mmio_handlers = {
+ .write_reg32 = unin_do_write_reg32,
+ .delay = macio_do_delay,
+};
+
+static void uninorth_install_pfunc(void)
+{
+ struct device_node *np;
+
+ DBG("Installing functions for UniN %s\n",
+ uninorth_node->full_name);
+
+ /*
+ * Install handlers for the bridge itself
+ */
+ pmf_register_driver(uninorth_node, &unin_mmio_handlers, NULL);
+ pmf_do_functions(uninorth_node, NULL, 0, PMF_FLAGS_ON_INIT, NULL);
+
+
+ /*
+ * Install handlers for the hwclock child if any
+ */
+ for (np = NULL; (np = of_get_next_child(uninorth_node, np)) != NULL;)
+ if (strcmp(np->name, "hw-clock") == 0) {
+ unin_hwclock = np;
+ break;
+ }
+ if (unin_hwclock) {
+ DBG("Installing functions for UniN clock %s\n",
+ unin_hwclock->full_name);
+ pmf_register_driver(unin_hwclock, &unin_mmio_handlers, NULL);
+ pmf_do_functions(unin_hwclock, NULL, 0, PMF_FLAGS_ON_INIT,
+ NULL);
+ }
+}
+
+/* We export this as the SMP code might init us early */
+int __init pmac_pfunc_base_install(void)
+{
+ static int pfbase_inited;
+ int i;
+
+ if (pfbase_inited)
+ return 0;
+ pfbase_inited = 1;
+
+
+ DBG("Installing base platform functions...\n");
+
+ /*
+ * Locate mac-io chips and install handlers
+ */
+ for (i = 0 ; i < MAX_MACIO_CHIPS; i++) {
+ if (macio_chips[i].of_node) {
+ macio_mmio_init_one(&macio_chips[i]);
+ macio_gpio_init_one(&macio_chips[i]);
+ }
+ }
+
+ /*
+ * Install handlers for northbridge and direct mapped hwclock
+ * if any. We do not implement the config space access callback
+ * which is only ever used for functions that we do not call in
+ * the current driver (enabling/disabling cells in U2, mostly used
+ * to restore the PCI settings, we do that differently)
+ */
+ if (uninorth_node && uninorth_base)
+ uninorth_install_pfunc();
+
+ DBG("All base functions installed\n");
+
+ return 0;
+}
+
+arch_initcall(pmac_pfunc_base_install);
+
+#ifdef CONFIG_PM
+
+/* Those can be called by pmac_feature. Ultimately, I should use a sysdev
+ * or a device, but for now, that's good enough until I sort out some
+ * ordering issues. Also, we do not bother with GPIOs, as so far I yet have
+ * to see a case where a GPIO function has the on-suspend or on-resume bit
+ */
+void pmac_pfunc_base_suspend(void)
+{
+ int i;
+
+ for (i = 0 ; i < MAX_MACIO_CHIPS; i++) {
+ if (macio_chips[i].of_node)
+ pmf_do_functions(macio_chips[i].of_node, NULL, 0,
+ PMF_FLAGS_ON_SLEEP, NULL);
+ }
+ if (uninorth_node)
+ pmf_do_functions(uninorth_node, NULL, 0,
+ PMF_FLAGS_ON_SLEEP, NULL);
+ if (unin_hwclock)
+ pmf_do_functions(unin_hwclock, NULL, 0,
+ PMF_FLAGS_ON_SLEEP, NULL);
+}
+
+void pmac_pfunc_base_resume(void)
+{
+ int i;
+
+ if (unin_hwclock)
+ pmf_do_functions(unin_hwclock, NULL, 0,
+ PMF_FLAGS_ON_WAKE, NULL);
+ if (uninorth_node)
+ pmf_do_functions(uninorth_node, NULL, 0,
+ PMF_FLAGS_ON_WAKE, NULL);
+ for (i = 0 ; i < MAX_MACIO_CHIPS; i++) {
+ if (macio_chips[i].of_node)
+ pmf_do_functions(macio_chips[i].of_node, NULL, 0,
+ PMF_FLAGS_ON_WAKE, NULL);
+ }
+}
+
+#endif /* CONFIG_PM */
diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c
new file mode 100644
index 000000000000..c32c623001dc
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pfunc_core.c
@@ -0,0 +1,989 @@
+/*
+ *
+ * FIXME: Properly make this race free with refcounting etc...
+ *
+ * FIXME: LOCKING !!!
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+
+#include <asm/semaphore.h>
+#include <asm/prom.h>
+#include <asm/pmac_pfunc.h>
+
+/* Debug */
+#define LOG_PARSE(fmt...)
+#define LOG_ERROR(fmt...) printk(fmt)
+#define LOG_BLOB(t,b,c)
+#define DBG(fmt...) printk(fmt)
+
+/* Command numbers */
+#define PMF_CMD_LIST 0
+#define PMF_CMD_WRITE_GPIO 1
+#define PMF_CMD_READ_GPIO 2
+#define PMF_CMD_WRITE_REG32 3
+#define PMF_CMD_READ_REG32 4
+#define PMF_CMD_WRITE_REG16 5
+#define PMF_CMD_READ_REG16 6
+#define PMF_CMD_WRITE_REG8 7
+#define PMF_CMD_READ_REG8 8
+#define PMF_CMD_DELAY 9
+#define PMF_CMD_WAIT_REG32 10
+#define PMF_CMD_WAIT_REG16 11
+#define PMF_CMD_WAIT_REG8 12
+#define PMF_CMD_READ_I2C 13
+#define PMF_CMD_WRITE_I2C 14
+#define PMF_CMD_RMW_I2C 15
+#define PMF_CMD_GEN_I2C 16
+#define PMF_CMD_SHIFT_BYTES_RIGHT 17
+#define PMF_CMD_SHIFT_BYTES_LEFT 18
+#define PMF_CMD_READ_CFG 19
+#define PMF_CMD_WRITE_CFG 20
+#define PMF_CMD_RMW_CFG 21
+#define PMF_CMD_READ_I2C_SUBADDR 22
+#define PMF_CMD_WRITE_I2C_SUBADDR 23
+#define PMF_CMD_SET_I2C_MODE 24
+#define PMF_CMD_RMW_I2C_SUBADDR 25
+#define PMF_CMD_READ_REG32_MASK_SHR_XOR 26
+#define PMF_CMD_READ_REG16_MASK_SHR_XOR 27
+#define PMF_CMD_READ_REG8_MASK_SHR_XOR 28
+#define PMF_CMD_WRITE_REG32_SHL_MASK 29
+#define PMF_CMD_WRITE_REG16_SHL_MASK 30
+#define PMF_CMD_WRITE_REG8_SHL_MASK 31
+#define PMF_CMD_MASK_AND_COMPARE 32
+#define PMF_CMD_COUNT 33
+
+/* This structure holds the state of the parser while walking through
+ * a function definition
+ */
+struct pmf_cmd {
+ const void *cmdptr;
+ const void *cmdend;
+ struct pmf_function *func;
+ void *instdata;
+ struct pmf_args *args;
+ int error;
+};
+
+#if 0
+/* Debug output */
+static void print_blob(const char *title, const void *blob, int bytes)
+{
+ printk("%s", title);
+ while(bytes--) {
+ printk("%02x ", *((u8 *)blob));
+ blob += 1;
+ }
+ printk("\n");
+}
+#endif
+
+/*
+ * Parser helpers
+ */
+
+static u32 pmf_next32(struct pmf_cmd *cmd)
+{
+ u32 value;
+ if ((cmd->cmdend - cmd->cmdptr) < 4) {
+ cmd->error = 1;
+ return 0;
+ }
+ value = *((u32 *)cmd->cmdptr);
+ cmd->cmdptr += 4;
+ return value;
+}
+
+static const void* pmf_next_blob(struct pmf_cmd *cmd, int count)
+{
+ const void *value;
+ if ((cmd->cmdend - cmd->cmdptr) < count) {
+ cmd->error = 1;
+ return NULL;
+ }
+ value = cmd->cmdptr;
+ cmd->cmdptr += count;
+ return value;
+}
+
+/*
+ * Individual command parsers
+ */
+
+#define PMF_PARSE_CALL(name, cmd, handlers, p...) \
+ do { \
+ if (cmd->error) \
+ return -ENXIO; \
+ if (handlers == NULL) \
+ return 0; \
+ if (handlers->name) \
+ return handlers->name(cmd->func, cmd->instdata, \
+ cmd->args, p); \
+ return -1; \
+ } while(0) \
+
+
+static int pmf_parser_write_gpio(struct pmf_cmd *cmd, struct pmf_handlers *h)
+{
+ u8 value = (u8)pmf_next32(cmd);
+ u8 mask = (u8)pmf_next32(cmd);
+
+ LOG_PARSE("pmf: write_gpio(value: %02x, mask: %02x)\n", value, mask);
+
+ PMF_PARSE_CALL(write_gpio, cmd, h, value, mask);
+}
+
+static int pmf_parser_read_gpio(struct pmf_cmd *cmd, struct pmf_handlers *h)
+{
+ u8 mask = (u8)pmf_next32(cmd);
+ int rshift = (int)pmf_next32(cmd);
+ u8 xor = (u8)pmf_next32(cmd);
+
+ LOG_PARSE("pmf: read_gpio(mask: %02x, rshift: %d, xor: %02x)\n",
+ mask, rshift, xor);
+
+ PMF_PARSE_CALL(read_gpio, cmd, h, mask, rshift, xor);
+}
+
+static int pmf_parser_write_reg32(struct pmf_cmd *cmd, struct pmf_handlers *h)
+{
+ u32 offset = pmf_next32(cmd);
+ u32 value = pmf_next32(cmd);
+ u32 mask = pmf_next32(cmd);
+
+ LOG_PARSE("pmf: write_reg32(offset: %08x, value: %08x, mask: %08x)\n",
+ offset, value, mask);
+
+ PMF_PARSE_CALL(write_reg32, cmd, h, offset, value, mask);
+}
+
+static int pmf_parser_read_reg32(struct pmf_cmd *cmd, struct pmf_handlers *h)
+{
+ u32 offset = pmf_next32(cmd);
+
+ LOG_PARSE("pmf: read_reg32(offset: %08x)\n", offset);
+
+ PMF_PARSE_CALL(read_reg32, cmd, h, offset);
+}
+
+
+static int pmf_parser_write_reg16(struct pmf_cmd *cmd, struct pmf_handlers *h)
+{
+ u32 offset = pmf_next32(cmd);
+ u16 value = (u16)pmf_next32(cmd);
+ u16 mask = (u16)pmf_next32(cmd);
+
+ LOG_PARSE("pmf: write_reg16(offset: %08x, value: %04x, mask: %04x)\n",
+ offset, value, mask);
+
+ PMF_PARSE_CALL(write_reg16, cmd, h, offset, value, mask);
+}
+
+static int pmf_parser_read_reg16(struct pmf_cmd *cmd, struct pmf_handlers *h)
+{
+ u32 offset = pmf_next32(cmd);
+
+ LOG_PARSE("pmf: read_reg16(offset: %08x)\n", offset);
+
+ PMF_PARSE_CALL(read_reg16, cmd, h, offset);
+}
+
+
+static int pmf_parser_write_reg8(struct pmf_cmd *cmd, struct pmf_handlers *h)
+{
+ u32 offset = pmf_next32(cmd);
+ u8 value = (u16)pmf_next32(cmd);
+ u8 mask = (u16)pmf_next32(cmd);
+
+ LOG_PARSE("pmf: write_reg8(offset: %08x, value: %02x, mask: %02x)\n",
+ offset, value, mask);
+
+ PMF_PARSE_CALL(write_reg8, cmd, h, offset, value, mask);
+}
+
+static int pmf_parser_read_reg8(struct pmf_cmd *cmd, struct pmf_handlers *h)
+{
+ u32 offset = pmf_next32(cmd);
+
+ LOG_PARSE("pmf: read_reg8(offset: %08x)\n", offset);
+
+ PMF_PARSE_CALL(read_reg8, cmd, h, offset);
+}
+
+static int pmf_parser_delay(struct pmf_cmd *cmd, struct pmf_handlers *h)
+{
+ u32 duration = pmf_next32(cmd);
+
+ LOG_PARSE("pmf: delay(duration: %d us)\n", duration);
+
+ PMF_PARSE_CALL(delay, cmd, h, duration);
+}
+
+static int pmf_parser_wait_reg32(struct pmf_cmd *cmd, struct pmf_handlers *h)
+{
+ u32 offset = pmf_next32(cmd);
+ u32 value = pmf_next32(cmd);
+ u32 mask = pmf_next32(cmd);
+
+ LOG_PARSE("pmf: wait_reg32(offset: %08x, comp_value: %08x,mask: %08x)\n",
+ offset, value, mask);
+
+ PMF_PARSE_CALL(wait_reg32, cmd, h, offset, value, mask);
+}
+
+static int pmf_parser_wait_reg16(struct pmf_cmd *cmd, struct pmf_handlers *h)
+{
+ u32 offset = pmf_next32(cmd);
+ u16 value = (u16)pmf_next32(cmd);
+ u16 mask = (u16)pmf_next32(cmd);
+
+ LOG_PARSE("pmf: wait_reg16(offset: %08x, comp_value: %04x,mask: %04x)\n",
+ offset, value, mask);
+
+ PMF_PARSE_CALL(wait_reg16, cmd, h, offset, value, mask);
+}
+
+static int pmf_parser_wait_reg8(struct pmf_cmd *cmd, struct pmf_handlers *h)
+{
+ u32 offset = pmf_next32(cmd);
+ u8 value = (u8)pmf_next32(cmd);
+ u8 mask = (u8)pmf_next32(cmd);
+
+ LOG_PARSE("pmf: wait_reg8(offset: %08x, comp_value: %02x,mask: %02x)\n",
+ offset, value, mask);
+
+ PMF_PARSE_CALL(wait_reg8, cmd, h, offset, value, mask);
+}
+
+static int pmf_parser_read_i2c(struct pmf_cmd *cmd, struct pmf_handlers *h)
+{
+ u32 bytes = pmf_next32(cmd);
+
+ LOG_PARSE("pmf: read_i2c(bytes: %ud)\n", bytes);
+
+ PMF_PARSE_CALL(read_i2c, cmd, h, bytes);
+}
+
+static int pmf_parser_write_i2c(struct pmf_cmd *cmd, struct pmf_handlers *h)
+{
+ u32 bytes = pmf_next32(cmd);
+ const void *blob = pmf_next_blob(cmd, bytes);
+
+ LOG_PARSE("pmf: write_i2c(bytes: %ud) ...\n", bytes);
+ LOG_BLOB("pmf: data: \n", blob, bytes);
+
+ PMF_PARSE_CALL(write_i2c, cmd, h, bytes, blob);
+}
+
+
+static int pmf_parser_rmw_i2c(struct pmf_cmd *cmd, struct pmf_handlers *h)
+{
+ u32 maskbytes = pmf_next32(cmd);
+ u32 valuesbytes = pmf_next32(cmd);
+ u32 totalbytes = pmf_next32(cmd);
+ const void *maskblob = pmf_next_blob(cmd, maskbytes);
+ const void *valuesblob = pmf_next_blob(cmd, valuesbytes);
+
+ LOG_PARSE("pmf: rmw_i2c(maskbytes: %ud, valuebytes: %ud, "
+ "totalbytes: %d) ...\n",
+ maskbytes, valuesbytes, totalbytes);
+ LOG_BLOB("pmf: mask data: \n", maskblob, maskbytes);
+ LOG_BLOB("pmf: values data: \n", valuesblob, valuesbytes);
+
+ PMF_PARSE_CALL(rmw_i2c, cmd, h, maskbytes, valuesbytes, totalbytes,
+ maskblob, valuesblob);
+}
+
+static int pmf_parser_read_cfg(struct pmf_cmd *cmd, struct pmf_handlers *h)
+{
+ u32 offset = pmf_next32(cmd);
+ u32 bytes = pmf_next32(cmd);
+
+ LOG_PARSE("pmf: read_cfg(offset: %x, bytes: %ud)\n", offset, bytes);
+
+ PMF_PARSE_CALL(read_cfg, cmd, h, offset, bytes);
+}
+
+
+static int pmf_parser_write_cfg(struct pmf_cmd *cmd, struct pmf_handlers *h)
+{
+ u32 offset = pmf_next32(cmd);
+ u32 bytes = pmf_next32(cmd);
+ const void *blob = pmf_next_blob(cmd, bytes);
+
+ LOG_PARSE("pmf: write_cfg(offset: %x, bytes: %ud)\n", offset, bytes);
+ LOG_BLOB("pmf: data: \n", blob, bytes);
+
+ PMF_PARSE_CALL(write_cfg, cmd, h, offset, bytes, blob);
+}
+
+static int pmf_parser_rmw_cfg(struct pmf_cmd *cmd, struct pmf_handlers *h)
+{
+ u32 offset = pmf_next32(cmd);
+ u32 maskbytes = pmf_next32(cmd);
+ u32 valuesbytes = pmf_next32(cmd);
+ u32 totalbytes = pmf_next32(cmd);
+ const void *maskblob = pmf_next_blob(cmd, maskbytes);
+ const void *valuesblob = pmf_next_blob(cmd, valuesbytes);
+
+ LOG_PARSE("pmf: rmw_cfg(maskbytes: %ud, valuebytes: %ud,"
+ " totalbytes: %d) ...\n",
+ maskbytes, valuesbytes, totalbytes);
+ LOG_BLOB("pmf: mask data: \n", maskblob, maskbytes);
+ LOG_BLOB("pmf: values data: \n", valuesblob, valuesbytes);
+
+ PMF_PARSE_CALL(rmw_cfg, cmd, h, offset, maskbytes, valuesbytes,
+ totalbytes, maskblob, valuesblob);
+}
+
+
+static int pmf_parser_read_i2c_sub(struct pmf_cmd *cmd, struct pmf_handlers *h)
+{
+ u8 subaddr = (u8)pmf_next32(cmd);
+ u32 bytes = pmf_next32(cmd);
+
+ LOG_PARSE("pmf: read_i2c_sub(subaddr: %x, bytes: %ud)\n",
+ subaddr, bytes);
+
+ PMF_PARSE_CALL(read_i2c_sub, cmd, h, subaddr, bytes);
+}
+
+static int pmf_parser_write_i2c_sub(struct pmf_cmd *cmd, struct pmf_handlers *h)
+{
+ u8 subaddr = (u8)pmf_next32(cmd);
+ u32 bytes = pmf_next32(cmd);
+ const void *blob = pmf_next_blob(cmd, bytes);
+
+ LOG_PARSE("pmf: write_i2c_sub(subaddr: %x, bytes: %ud) ...\n",
+ subaddr, bytes);
+ LOG_BLOB("pmf: data: \n", blob, bytes);
+
+ PMF_PARSE_CALL(write_i2c_sub, cmd, h, subaddr, bytes, blob);
+}
+
+static int pmf_parser_set_i2c_mode(struct pmf_cmd *cmd, struct pmf_handlers *h)
+{
+ u32 mode = pmf_next32(cmd);
+
+ LOG_PARSE("pmf: set_i2c_mode(mode: %d)\n", mode);
+
+ PMF_PARSE_CALL(set_i2c_mode, cmd, h, mode);
+}
+
+
+static int pmf_parser_rmw_i2c_sub(struct pmf_cmd *cmd, struct pmf_handlers *h)
+{
+ u8 subaddr = (u8)pmf_next32(cmd);
+ u32 maskbytes = pmf_next32(cmd);
+ u32 valuesbytes = pmf_next32(cmd);
+ u32 totalbytes = pmf_next32(cmd);
+ const void *maskblob = pmf_next_blob(cmd, maskbytes);
+ const void *valuesblob = pmf_next_blob(cmd, valuesbytes);
+
+ LOG_PARSE("pmf: rmw_i2c_sub(subaddr: %x, maskbytes: %ud, valuebytes: %ud"
+ ", totalbytes: %d) ...\n",
+ subaddr, maskbytes, valuesbytes, totalbytes);
+ LOG_BLOB("pmf: mask data: \n", maskblob, maskbytes);
+ LOG_BLOB("pmf: values data: \n", valuesblob, valuesbytes);
+
+ PMF_PARSE_CALL(rmw_i2c_sub, cmd, h, subaddr, maskbytes, valuesbytes,
+ totalbytes, maskblob, valuesblob);
+}
+
+static int pmf_parser_read_reg32_msrx(struct pmf_cmd *cmd,
+ struct pmf_handlers *h)
+{
+ u32 offset = pmf_next32(cmd);
+ u32 mask = pmf_next32(cmd);
+ u32 shift = pmf_next32(cmd);
+ u32 xor = pmf_next32(cmd);
+
+ LOG_PARSE("pmf: read_reg32_msrx(offset: %x, mask: %x, shift: %x,"
+ " xor: %x\n", offset, mask, shift, xor);
+
+ PMF_PARSE_CALL(read_reg32_msrx, cmd, h, offset, mask, shift, xor);
+}
+
+static int pmf_parser_read_reg16_msrx(struct pmf_cmd *cmd,
+ struct pmf_handlers *h)
+{
+ u32 offset = pmf_next32(cmd);
+ u32 mask = pmf_next32(cmd);
+ u32 shift = pmf_next32(cmd);
+ u32 xor = pmf_next32(cmd);
+
+ LOG_PARSE("pmf: read_reg16_msrx(offset: %x, mask: %x, shift: %x,"
+ " xor: %x\n", offset, mask, shift, xor);
+
+ PMF_PARSE_CALL(read_reg16_msrx, cmd, h, offset, mask, shift, xor);
+}
+static int pmf_parser_read_reg8_msrx(struct pmf_cmd *cmd,
+ struct pmf_handlers *h)
+{
+ u32 offset = pmf_next32(cmd);
+ u32 mask = pmf_next32(cmd);
+ u32 shift = pmf_next32(cmd);
+ u32 xor = pmf_next32(cmd);
+
+ LOG_PARSE("pmf: read_reg8_msrx(offset: %x, mask: %x, shift: %x,"
+ " xor: %x\n", offset, mask, shift, xor);
+
+ PMF_PARSE_CALL(read_reg8_msrx, cmd, h, offset, mask, shift, xor);
+}
+
+static int pmf_parser_write_reg32_slm(struct pmf_cmd *cmd,
+ struct pmf_handlers *h)
+{
+ u32 offset = pmf_next32(cmd);
+ u32 shift = pmf_next32(cmd);
+ u32 mask = pmf_next32(cmd);
+
+ LOG_PARSE("pmf: write_reg32_slm(offset: %x, shift: %x, mask: %x\n",
+ offset, shift, mask);
+
+ PMF_PARSE_CALL(write_reg32_slm, cmd, h, offset, shift, mask);
+}
+
+static int pmf_parser_write_reg16_slm(struct pmf_cmd *cmd,
+ struct pmf_handlers *h)
+{
+ u32 offset = pmf_next32(cmd);
+ u32 shift = pmf_next32(cmd);
+ u32 mask = pmf_next32(cmd);
+
+ LOG_PARSE("pmf: write_reg16_slm(offset: %x, shift: %x, mask: %x\n",
+ offset, shift, mask);
+
+ PMF_PARSE_CALL(write_reg16_slm, cmd, h, offset, shift, mask);
+}
+
+static int pmf_parser_write_reg8_slm(struct pmf_cmd *cmd,
+ struct pmf_handlers *h)
+{
+ u32 offset = pmf_next32(cmd);
+ u32 shift = pmf_next32(cmd);
+ u32 mask = pmf_next32(cmd);
+
+ LOG_PARSE("pmf: write_reg8_slm(offset: %x, shift: %x, mask: %x\n",
+ offset, shift, mask);
+
+ PMF_PARSE_CALL(write_reg8_slm, cmd, h, offset, shift, mask);
+}
+
+static int pmf_parser_mask_and_compare(struct pmf_cmd *cmd,
+ struct pmf_handlers *h)
+{
+ u32 bytes = pmf_next32(cmd);
+ const void *maskblob = pmf_next_blob(cmd, bytes);
+ const void *valuesblob = pmf_next_blob(cmd, bytes);
+
+ LOG_PARSE("pmf: mask_and_compare(length: %ud ...\n", bytes);
+ LOG_BLOB("pmf: mask data: \n", maskblob, bytes);
+ LOG_BLOB("pmf: values data: \n", valuesblob, bytes);
+
+ PMF_PARSE_CALL(mask_and_compare, cmd, h,
+ bytes, maskblob, valuesblob);
+}
+
+
+typedef int (*pmf_cmd_parser_t)(struct pmf_cmd *cmd, struct pmf_handlers *h);
+
+static pmf_cmd_parser_t pmf_parsers[PMF_CMD_COUNT] =
+{
+ NULL,
+ pmf_parser_write_gpio,
+ pmf_parser_read_gpio,
+ pmf_parser_write_reg32,
+ pmf_parser_read_reg32,
+ pmf_parser_write_reg16,
+ pmf_parser_read_reg16,
+ pmf_parser_write_reg8,
+ pmf_parser_read_reg8,
+ pmf_parser_delay,
+ pmf_parser_wait_reg32,
+ pmf_parser_wait_reg16,
+ pmf_parser_wait_reg8,
+ pmf_parser_read_i2c,
+ pmf_parser_write_i2c,
+ pmf_parser_rmw_i2c,
+ NULL, /* Bogus command */
+ NULL, /* Shift bytes right: NYI */
+ NULL, /* Shift bytes left: NYI */
+ pmf_parser_read_cfg,
+ pmf_parser_write_cfg,
+ pmf_parser_rmw_cfg,
+ pmf_parser_read_i2c_sub,
+ pmf_parser_write_i2c_sub,
+ pmf_parser_set_i2c_mode,
+ pmf_parser_rmw_i2c_sub,
+ pmf_parser_read_reg32_msrx,
+ pmf_parser_read_reg16_msrx,
+ pmf_parser_read_reg8_msrx,
+ pmf_parser_write_reg32_slm,
+ pmf_parser_write_reg16_slm,
+ pmf_parser_write_reg8_slm,
+ pmf_parser_mask_and_compare,
+};
+
+struct pmf_device {
+ struct list_head link;
+ struct device_node *node;
+ struct pmf_handlers *handlers;
+ struct list_head functions;
+ struct kref ref;
+};
+
+static LIST_HEAD(pmf_devices);
+static spinlock_t pmf_lock = SPIN_LOCK_UNLOCKED;
+
+static void pmf_release_device(struct kref *kref)
+{
+ struct pmf_device *dev = container_of(kref, struct pmf_device, ref);
+ kfree(dev);
+}
+
+static inline void pmf_put_device(struct pmf_device *dev)
+{
+ kref_put(&dev->ref, pmf_release_device);
+}
+
+static inline struct pmf_device *pmf_get_device(struct pmf_device *dev)
+{
+ kref_get(&dev->ref);
+ return dev;
+}
+
+static inline struct pmf_device *pmf_find_device(struct device_node *np)
+{
+ struct pmf_device *dev;
+
+ list_for_each_entry(dev, &pmf_devices, link) {
+ if (dev->node == np)
+ return pmf_get_device(dev);
+ }
+ return NULL;
+}
+
+static int pmf_parse_one(struct pmf_function *func,
+ struct pmf_handlers *handlers,
+ void *instdata, struct pmf_args *args)
+{
+ struct pmf_cmd cmd;
+ u32 ccode;
+ int count, rc;
+
+ cmd.cmdptr = func->data;
+ cmd.cmdend = func->data + func->length;
+ cmd.func = func;
+ cmd.instdata = instdata;
+ cmd.args = args;
+ cmd.error = 0;
+
+ LOG_PARSE("pmf: func %s, %d bytes, %s...\n",
+ func->name, func->length,
+ handlers ? "executing" : "parsing");
+
+ /* One subcommand to parse for now */
+ count = 1;
+
+ while(count-- && cmd.cmdptr < cmd.cmdend) {
+ /* Get opcode */
+ ccode = pmf_next32(&cmd);
+ /* Check if we are hitting a command list, fetch new count */
+ if (ccode == 0) {
+ count = pmf_next32(&cmd) - 1;
+ ccode = pmf_next32(&cmd);
+ }
+ if (cmd.error) {
+ LOG_ERROR("pmf: parse error, not enough data\n");
+ return -ENXIO;
+ }
+ if (ccode >= PMF_CMD_COUNT) {
+ LOG_ERROR("pmf: command code %d unknown !\n", ccode);
+ return -ENXIO;
+ }
+ if (pmf_parsers[ccode] == NULL) {
+ LOG_ERROR("pmf: no parser for command %d !\n", ccode);
+ return -ENXIO;
+ }
+ rc = pmf_parsers[ccode](&cmd, handlers);
+ if (rc != 0) {
+ LOG_ERROR("pmf: parser for command %d returned"
+ " error %d\n", ccode, rc);
+ return rc;
+ }
+ }
+
+ /* We are doing an initial parse pass, we need to adjust the size */
+ if (handlers == NULL)
+ func->length = cmd.cmdptr - func->data;
+
+ return 0;
+}
+
+static int pmf_add_function_prop(struct pmf_device *dev, void *driverdata,
+ const char *name, u32 *data,
+ unsigned int length)
+{
+ int count = 0;
+ struct pmf_function *func = NULL;
+
+ DBG("pmf: Adding functions for platform-do-%s\n", name);
+
+ while (length >= 12) {
+ /* Allocate a structure */
+ func = kzalloc(sizeof(struct pmf_function), GFP_KERNEL);
+ if (func == NULL)
+ goto bail;
+ kref_init(&func->ref);
+ INIT_LIST_HEAD(&func->irq_clients);
+ func->node = dev->node;
+ func->driver_data = driverdata;
+ func->name = name;
+ func->phandle = data[0];
+ func->flags = data[1];
+ data += 2;
+ length -= 8;
+ func->data = data;
+ func->length = length;
+ func->dev = dev;
+ DBG("pmf: idx %d: flags=%08x, phandle=%08x "
+ " %d bytes remaining, parsing...\n",
+ count+1, func->flags, func->phandle, length);
+ if (pmf_parse_one(func, NULL, NULL, NULL)) {
+ kfree(func);
+ goto bail;
+ }
+ length -= func->length;
+ data = (u32 *)(((u8 *)data) + func->length);
+ list_add(&func->link, &dev->functions);
+ pmf_get_device(dev);
+ count++;
+ }
+ bail:
+ DBG("pmf: Added %d functions\n", count);
+
+ return count;
+}
+
+static int pmf_add_functions(struct pmf_device *dev, void *driverdata)
+{
+ struct property *pp;
+#define PP_PREFIX "platform-do-"
+ const int plen = strlen(PP_PREFIX);
+ int count = 0;
+
+ for (pp = dev->node->properties; pp != 0; pp = pp->next) {
+ char *name;
+ if (strncmp(pp->name, PP_PREFIX, plen) != 0)
+ continue;
+ name = pp->name + plen;
+ if (strlen(name) && pp->length >= 12)
+ count += pmf_add_function_prop(dev, driverdata, name,
+ (u32 *)pp->value,
+ pp->length);
+ }
+ return count;
+}
+
+
+int pmf_register_driver(struct device_node *np,
+ struct pmf_handlers *handlers,
+ void *driverdata)
+{
+ struct pmf_device *dev;
+ unsigned long flags;
+ int rc = 0;
+
+ if (handlers == NULL)
+ return -EINVAL;
+
+ DBG("pmf: registering driver for node %s\n", np->full_name);
+
+ spin_lock_irqsave(&pmf_lock, flags);
+ dev = pmf_find_device(np);
+ spin_unlock_irqrestore(&pmf_lock, flags);
+ if (dev != NULL) {
+ DBG("pmf: already there !\n");
+ pmf_put_device(dev);
+ return -EBUSY;
+ }
+
+ dev = kzalloc(sizeof(struct pmf_device), GFP_KERNEL);
+ if (dev == NULL) {
+ DBG("pmf: no memory !\n");
+ return -ENOMEM;
+ }
+ kref_init(&dev->ref);
+ dev->node = of_node_get(np);
+ dev->handlers = handlers;
+ INIT_LIST_HEAD(&dev->functions);
+
+ rc = pmf_add_functions(dev, driverdata);
+ if (rc == 0) {
+ DBG("pmf: no functions, disposing.. \n");
+ of_node_put(np);
+ kfree(dev);
+ return -ENODEV;
+ }
+
+ spin_lock_irqsave(&pmf_lock, flags);
+ list_add(&dev->link, &pmf_devices);
+ spin_unlock_irqrestore(&pmf_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pmf_register_driver);
+
+struct pmf_function *pmf_get_function(struct pmf_function *func)
+{
+ if (!try_module_get(func->dev->handlers->owner))
+ return NULL;
+ kref_get(&func->ref);
+ return func;
+}
+EXPORT_SYMBOL_GPL(pmf_get_function);
+
+static void pmf_release_function(struct kref *kref)
+{
+ struct pmf_function *func =
+ container_of(kref, struct pmf_function, ref);
+ pmf_put_device(func->dev);
+ kfree(func);
+}
+
+static inline void __pmf_put_function(struct pmf_function *func)
+{
+ kref_put(&func->ref, pmf_release_function);
+}
+
+void pmf_put_function(struct pmf_function *func)
+{
+ if (func == NULL)
+ return;
+ module_put(func->dev->handlers->owner);
+ __pmf_put_function(func);
+}
+EXPORT_SYMBOL_GPL(pmf_put_function);
+
+void pmf_unregister_driver(struct device_node *np)
+{
+ struct pmf_device *dev;
+ unsigned long flags;
+
+ DBG("pmf: unregistering driver for node %s\n", np->full_name);
+
+ spin_lock_irqsave(&pmf_lock, flags);
+ dev = pmf_find_device(np);
+ if (dev == NULL) {
+ DBG("pmf: not such driver !\n");
+ spin_unlock_irqrestore(&pmf_lock, flags);
+ return;
+ }
+ list_del(&dev->link);
+
+ while(!list_empty(&dev->functions)) {
+ struct pmf_function *func =
+ list_entry(dev->functions.next, typeof(*func), link);
+ list_del(&func->link);
+ __pmf_put_function(func);
+ }
+
+ pmf_put_device(dev);
+ spin_unlock_irqrestore(&pmf_lock, flags);
+}
+EXPORT_SYMBOL_GPL(pmf_unregister_driver);
+
+struct pmf_function *__pmf_find_function(struct device_node *target,
+ const char *name, u32 flags)
+{
+ struct device_node *actor = of_node_get(target);
+ struct pmf_device *dev;
+ struct pmf_function *func, *result = NULL;
+ char fname[64];
+ u32 *prop, ph;
+
+ /*
+ * Look for a "platform-*" function reference. If we can't find
+ * one, then we fallback to a direct call attempt
+ */
+ snprintf(fname, 63, "platform-%s", name);
+ prop = (u32 *)get_property(target, fname, NULL);
+ if (prop == NULL)
+ goto find_it;
+ ph = *prop;
+ if (ph == 0)
+ goto find_it;
+
+ /*
+ * Ok, now try to find the actor. If we can't find it, we fail,
+ * there is no point in falling back there
+ */
+ of_node_put(actor);
+ actor = of_find_node_by_phandle(ph);
+ if (actor == NULL)
+ return NULL;
+ find_it:
+ dev = pmf_find_device(actor);
+ if (dev == NULL)
+ return NULL;
+
+ list_for_each_entry(func, &dev->functions, link) {
+ if (name && strcmp(name, func->name))
+ continue;
+ if (func->phandle && target->node != func->phandle)
+ continue;
+ if ((func->flags & flags) == 0)
+ continue;
+ result = func;
+ break;
+ }
+ of_node_put(actor);
+ pmf_put_device(dev);
+ return result;
+}
+
+
+int pmf_register_irq_client(struct device_node *target,
+ const char *name,
+ struct pmf_irq_client *client)
+{
+ struct pmf_function *func;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pmf_lock, flags);
+ func = __pmf_find_function(target, name, PMF_FLAGS_INT_GEN);
+ if (func == NULL) {
+ spin_unlock_irqrestore(&pmf_lock, flags);
+ return -ENODEV;
+ }
+ list_add(&client->link, &func->irq_clients);
+ spin_unlock_irqrestore(&pmf_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pmf_register_irq_client);
+
+void pmf_unregister_irq_client(struct device_node *np,
+ const char *name,
+ struct pmf_irq_client *client)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pmf_lock, flags);
+ list_del(&client->link);
+ spin_unlock_irqrestore(&pmf_lock, flags);
+}
+EXPORT_SYMBOL_GPL(pmf_unregister_irq_client);
+
+
+void pmf_do_irq(struct pmf_function *func)
+{
+ unsigned long flags;
+ struct pmf_irq_client *client;
+
+ /* For now, using a spinlock over the whole function. Can be made
+ * to drop the lock using 2 lists if necessary
+ */
+ spin_lock_irqsave(&pmf_lock, flags);
+ list_for_each_entry(client, &func->irq_clients, link) {
+ if (!try_module_get(client->owner))
+ continue;
+ client->handler(client->data);
+ module_put(client->owner);
+ }
+ spin_unlock_irqrestore(&pmf_lock, flags);
+}
+EXPORT_SYMBOL_GPL(pmf_do_irq);
+
+
+int pmf_call_one(struct pmf_function *func, struct pmf_args *args)
+{
+ struct pmf_device *dev = func->dev;
+ void *instdata = NULL;
+ int rc = 0;
+
+ DBG(" ** pmf_call_one(%s/%s) **\n", dev->node->full_name, func->name);
+
+ if (dev->handlers->begin)
+ instdata = dev->handlers->begin(func, args);
+ rc = pmf_parse_one(func, dev->handlers, instdata, args);
+ if (dev->handlers->end)
+ dev->handlers->end(func, instdata);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(pmf_call_one);
+
+int pmf_do_functions(struct device_node *np, const char *name,
+ u32 phandle, u32 fflags, struct pmf_args *args)
+{
+ struct pmf_device *dev;
+ struct pmf_function *func, *tmp;
+ unsigned long flags;
+ int rc = -ENODEV;
+
+ spin_lock_irqsave(&pmf_lock, flags);
+
+ dev = pmf_find_device(np);
+ if (dev == NULL) {
+ spin_unlock_irqrestore(&pmf_lock, flags);
+ return -ENODEV;
+ }
+ list_for_each_entry_safe(func, tmp, &dev->functions, link) {
+ if (name && strcmp(name, func->name))
+ continue;
+ if (phandle && func->phandle && phandle != func->phandle)
+ continue;
+ if ((func->flags & fflags) == 0)
+ continue;
+ if (pmf_get_function(func) == NULL)
+ continue;
+ spin_unlock_irqrestore(&pmf_lock, flags);
+ rc = pmf_call_one(func, args);
+ pmf_put_function(func);
+ spin_lock_irqsave(&pmf_lock, flags);
+ }
+ pmf_put_device(dev);
+ spin_unlock_irqrestore(&pmf_lock, flags);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(pmf_do_functions);
+
+
+struct pmf_function *pmf_find_function(struct device_node *target,
+ const char *name)
+{
+ struct pmf_function *func;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pmf_lock, flags);
+ func = __pmf_find_function(target, name, PMF_FLAGS_ON_DEMAND);
+ if (func)
+ func = pmf_get_function(func);
+ spin_unlock_irqrestore(&pmf_lock, flags);
+ return func;
+}
+EXPORT_SYMBOL_GPL(pmf_find_function);
+
+int pmf_call_function(struct device_node *target, const char *name,
+ struct pmf_args *args)
+{
+ struct pmf_function *func = pmf_find_function(target, name);
+ int rc;
+
+ if (func == NULL)
+ return -ENODEV;
+
+ rc = pmf_call_one(func, args);
+ pmf_put_function(func);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(pmf_call_function);
+
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 90040c49494d..18bf3011d1e3 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -5,8 +5,8 @@
* in a separate file
*
* Copyright (C) 1997 Paul Mackerras (paulus@samba.org)
- *
- * Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ * Copyright (C) 2005 Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ * IBM, Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -54,12 +54,7 @@ struct pmac_irq_hw {
};
/* Default addresses */
-static volatile struct pmac_irq_hw *pmac_irq_hw[4] = {
- (struct pmac_irq_hw *) 0xf3000020,
- (struct pmac_irq_hw *) 0xf3000010,
- (struct pmac_irq_hw *) 0xf4000020,
- (struct pmac_irq_hw *) 0xf4000010,
-};
+static volatile struct pmac_irq_hw __iomem *pmac_irq_hw[4];
#define GC_LEVEL_MASK 0x3ff00000
#define OHARE_LEVEL_MASK 0x1ff00000
@@ -82,8 +77,7 @@ static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
* since it can lose interrupts (see pmac_set_irq_mask).
* -- Cort
*/
-void
-__set_lost(unsigned long irq_nr, int nokick)
+void __set_lost(unsigned long irq_nr, int nokick)
{
if (!test_and_set_bit(irq_nr, ppc_lost_interrupts)) {
atomic_inc(&ppc_n_lost_interrupts);
@@ -92,8 +86,7 @@ __set_lost(unsigned long irq_nr, int nokick)
}
}
-static void
-pmac_mask_and_ack_irq(unsigned int irq_nr)
+static void pmac_mask_and_ack_irq(unsigned int irq_nr)
{
unsigned long bit = 1UL << (irq_nr & 0x1f);
int i = irq_nr >> 5;
@@ -224,8 +217,7 @@ static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs)
return IRQ_NONE;
}
-int
-pmac_get_irq(struct pt_regs *regs)
+static int pmac_get_irq(struct pt_regs *regs)
{
int irq;
unsigned long bits = 0;
@@ -256,34 +248,40 @@ pmac_get_irq(struct pt_regs *regs)
/* This routine will fix some missing interrupt values in the device tree
* on the gatwick mac-io controller used by some PowerBooks
+ *
+ * Walking of OF nodes could use a bit more fixing up here, but it's not
+ * very important as this is all boot time code on static portions of the
+ * device-tree.
+ *
+ * However, the modifications done to "intrs" will have to be removed and
+ * replaced with proper updates of the "interrupts" properties or
+ * AAPL,interrupts, yet to be decided, once the dynamic parsing is there.
*/
-static void __init
-pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base)
+static void __init pmac_fix_gatwick_interrupts(struct device_node *gw,
+ int irq_base)
{
struct device_node *node;
int count;
memset(gatwick_int_pool, 0, sizeof(gatwick_int_pool));
- node = gw->child;
count = 0;
- while(node)
- {
+ for (node = NULL; (node = of_get_next_child(gw, node)) != NULL;) {
/* Fix SCC */
- if (strcasecmp(node->name, "escc") == 0)
- if (node->child) {
- if (node->child->n_intrs < 3) {
- node->child->intrs = &gatwick_int_pool[count];
- count += 3;
- }
- node->child->n_intrs = 3;
- node->child->intrs[0].line = 15+irq_base;
- node->child->intrs[1].line = 4+irq_base;
- node->child->intrs[2].line = 5+irq_base;
- printk(KERN_INFO "irq: fixed SCC on second controller (%d,%d,%d)\n",
- node->child->intrs[0].line,
- node->child->intrs[1].line,
- node->child->intrs[2].line);
+ if ((strcasecmp(node->name, "escc") == 0) && node->child) {
+ if (node->child->n_intrs < 3) {
+ node->child->intrs = &gatwick_int_pool[count];
+ count += 3;
}
+ node->child->n_intrs = 3;
+ node->child->intrs[0].line = 15+irq_base;
+ node->child->intrs[1].line = 4+irq_base;
+ node->child->intrs[2].line = 5+irq_base;
+ printk(KERN_INFO "irq: fixed SCC on gatwick"
+ " (%d,%d,%d)\n",
+ node->child->intrs[0].line,
+ node->child->intrs[1].line,
+ node->child->intrs[2].line);
+ }
/* Fix media-bay & left SWIM */
if (strcasecmp(node->name, "media-bay") == 0) {
struct device_node* ya_node;
@@ -292,12 +290,11 @@ pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base)
node->intrs = &gatwick_int_pool[count++];
node->n_intrs = 1;
node->intrs[0].line = 29+irq_base;
- printk(KERN_INFO "irq: fixed media-bay on second controller (%d)\n",
- node->intrs[0].line);
+ printk(KERN_INFO "irq: fixed media-bay on gatwick"
+ " (%d)\n", node->intrs[0].line);
ya_node = node->child;
- while(ya_node)
- {
+ while(ya_node) {
if (strcasecmp(ya_node->name, "floppy") == 0) {
if (ya_node->n_intrs < 2) {
ya_node->intrs = &gatwick_int_pool[count];
@@ -323,7 +320,6 @@ pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base)
ya_node = ya_node->sibling;
}
}
- node = node->sibling;
}
if (count > 10) {
printk("WARNING !! Gatwick interrupt pool overflow\n");
@@ -338,45 +334,41 @@ pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base)
* controller. If we find this second ohare, set it up and fix the
* interrupt value in the device tree for the ethernet chip.
*/
-static int __init enable_second_ohare(void)
+static void __init enable_second_ohare(struct device_node *np)
{
unsigned char bus, devfn;
unsigned short cmd;
- unsigned long addr;
- struct device_node *irqctrler = find_devices("pci106b,7");
struct device_node *ether;
- if (irqctrler == NULL || irqctrler->n_addrs <= 0)
- return -1;
- addr = (unsigned long) ioremap(irqctrler->addrs[0].address, 0x40);
- pmac_irq_hw[1] = (volatile struct pmac_irq_hw *)(addr + 0x20);
- max_irqs = 64;
- if (pci_device_from_OF_node(irqctrler, &bus, &devfn) == 0) {
- struct pci_controller* hose = pci_find_hose_for_OF_device(irqctrler);
- if (!hose)
- printk(KERN_ERR "Can't find PCI hose for OHare2 !\n");
- else {
- early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd);
- cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
- cmd &= ~PCI_COMMAND_IO;
- early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd);
+ /* This code doesn't strictly belong here, it could be part of
+ * either the PCI initialisation or the feature code. It's kept
+ * here for historical reasons.
+ */
+ if (pci_device_from_OF_node(np, &bus, &devfn) == 0) {
+ struct pci_controller* hose =
+ pci_find_hose_for_OF_device(np);
+ if (!hose) {
+ printk(KERN_ERR "Can't find PCI hose for OHare2 !\n");
+ return;
}
+ early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+ cmd &= ~PCI_COMMAND_IO;
+ early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd);
}
/* Fix interrupt for the modem/ethernet combo controller. The number
- in the device tree (27) is bogus (correct for the ethernet-only
- board but not the combo ethernet/modem board).
- The real interrupt is 28 on the second controller -> 28+32 = 60.
- */
- ether = find_devices("pci1011,14");
+ * in the device tree (27) is bogus (correct for the ethernet-only
+ * board but not the combo ethernet/modem board).
+ * The real interrupt is 28 on the second controller -> 28+32 = 60.
+ */
+ ether = of_find_node_by_name(NULL, "pci1011,14");
if (ether && ether->n_intrs > 0) {
ether->intrs[0].line = 60;
printk(KERN_INFO "irq: Fixed ethernet IRQ to %d\n",
ether->intrs[0].line);
}
-
- /* Return the interrupt number of the cascade */
- return irqctrler->intrs[0].line;
+ of_node_put(ether);
}
#ifdef CONFIG_XMON
@@ -394,189 +386,251 @@ static struct irqaction gatwick_cascade_action = {
.mask = CPU_MASK_NONE,
.name = "cascade",
};
-#endif /* CONFIG_PPC32 */
-static int pmac_u3_cascade(struct pt_regs *regs, void *data)
+static void __init pmac_pic_probe_oldstyle(void)
{
- return mpic_get_one_irq((struct mpic *)data, regs);
-}
-
-void __init pmac_pic_init(void)
-{
- struct device_node *irqctrler = NULL;
- struct device_node *irqctrler2 = NULL;
- struct device_node *np;
-#ifdef CONFIG_PPC32
int i;
- unsigned long addr;
int irq_cascade = -1;
-#endif
- struct mpic *mpic1, *mpic2;
+ struct device_node *master = NULL;
+ struct device_node *slave = NULL;
+ u8 __iomem *addr;
+ struct resource r;
- /* We first try to detect Apple's new Core99 chipset, since mac-io
- * is quite different on those machines and contains an IBM MPIC2.
- */
- np = find_type_devices("open-pic");
- while (np) {
- if (np->parent && !strcmp(np->parent->name, "u3"))
- irqctrler2 = np;
- else
- irqctrler = np;
- np = np->next;
- }
- if (irqctrler != NULL && irqctrler->n_addrs > 0) {
- unsigned char senses[128];
-
- printk(KERN_INFO "PowerMac using OpenPIC irq controller at 0x%08x\n",
- (unsigned int)irqctrler->addrs[0].address);
- pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler, 0, 0);
-
- prom_get_irq_senses(senses, 0, 128);
- mpic1 = mpic_alloc(irqctrler->addrs[0].address,
- MPIC_PRIMARY | MPIC_WANTS_RESET,
- 0, 0, 128, 252, senses, 128, " OpenPIC ");
- BUG_ON(mpic1 == NULL);
- mpic_init(mpic1);
-
- if (irqctrler2 != NULL && irqctrler2->n_intrs > 0 &&
- irqctrler2->n_addrs > 0) {
- printk(KERN_INFO "Slave OpenPIC at 0x%08x hooked on IRQ %d\n",
- (u32)irqctrler2->addrs[0].address,
- irqctrler2->intrs[0].line);
-
- pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler2, 0, 0);
- prom_get_irq_senses(senses, 128, 128 + 124);
-
- /* We don't need to set MPIC_BROKEN_U3 here since we don't have
- * hypertransport interrupts routed to it
- */
- mpic2 = mpic_alloc(irqctrler2->addrs[0].address,
- MPIC_BIG_ENDIAN | MPIC_WANTS_RESET,
- 0, 128, 124, 0, senses, 124,
- " U3-MPIC ");
- BUG_ON(mpic2 == NULL);
- mpic_init(mpic2);
- mpic_setup_cascade(irqctrler2->intrs[0].line,
- pmac_u3_cascade, mpic2);
- }
-#if defined(CONFIG_XMON) && defined(CONFIG_PPC32)
- {
- struct device_node* pswitch;
- int nmi_irq;
-
- pswitch = find_devices("programmer-switch");
- if (pswitch && pswitch->n_intrs) {
- nmi_irq = pswitch->intrs[0].line;
- mpic_irq_set_priority(nmi_irq, 9);
- setup_irq(nmi_irq, &xmon_action);
- }
- }
-#endif /* CONFIG_XMON */
- return;
- }
- irqctrler = NULL;
+ /* Set our get_irq function */
+ ppc_md.get_irq = pmac_get_irq;
-#ifdef CONFIG_PPC32
- /* Get the level/edge settings, assume if it's not
- * a Grand Central nor an OHare, then it's an Heathrow
- * (or Paddington).
+ /*
+ * Find the interrupt controller type & node
*/
- ppc_md.get_irq = pmac_get_irq;
- if (find_devices("gc"))
+
+ if ((master = of_find_node_by_name(NULL, "gc")) != NULL) {
+ max_irqs = max_real_irqs = 32;
level_mask[0] = GC_LEVEL_MASK;
- else if (find_devices("ohare")) {
+ } else if ((master = of_find_node_by_name(NULL, "ohare")) != NULL) {
+ max_irqs = max_real_irqs = 32;
level_mask[0] = OHARE_LEVEL_MASK;
+
/* We might have a second cascaded ohare */
- level_mask[1] = OHARE_LEVEL_MASK;
- } else {
+ slave = of_find_node_by_name(NULL, "pci106b,7");
+ if (slave) {
+ max_irqs = 64;
+ level_mask[1] = OHARE_LEVEL_MASK;
+ enable_second_ohare(slave);
+ }
+ } else if ((master = of_find_node_by_name(NULL, "mac-io")) != NULL) {
+ max_irqs = max_real_irqs = 64;
level_mask[0] = HEATHROW_LEVEL_MASK;
level_mask[1] = 0;
+
/* We might have a second cascaded heathrow */
- level_mask[2] = HEATHROW_LEVEL_MASK;
- level_mask[3] = 0;
- }
+ slave = of_find_node_by_name(master, "mac-io");
+
+ /* Check ordering of master & slave */
+ if (device_is_compatible(master, "gatwick")) {
+ struct device_node *tmp;
+ BUG_ON(slave == NULL);
+ tmp = master;
+ master = slave;
+ slave = tmp;
+ }
- /*
- * G3 powermacs and 1999 G3 PowerBooks have 64 interrupts,
- * 1998 G3 Series PowerBooks have 128,
- * other powermacs have 32.
- * The combo ethernet/modem card for the Powerstar powerbooks
- * (2400/3400/3500, ohare based) has a second ohare chip
- * effectively making a total of 64.
- */
- max_irqs = max_real_irqs = 32;
- irqctrler = find_devices("mac-io");
- if (irqctrler)
- {
- max_real_irqs = 64;
- if (irqctrler->next)
+ /* We found a slave */
+ if (slave) {
max_irqs = 128;
- else
- max_irqs = 64;
+ level_mask[2] = HEATHROW_LEVEL_MASK;
+ level_mask[3] = 0;
+ pmac_fix_gatwick_interrupts(slave, max_real_irqs);
+ }
}
+ BUG_ON(master == NULL);
+
+ /* Set the handler for the main PIC */
for ( i = 0; i < max_real_irqs ; i++ )
irq_desc[i].handler = &pmac_pic;
- /* get addresses of first controller */
- if (irqctrler) {
- if (irqctrler->n_addrs > 0) {
- addr = (unsigned long)
- ioremap(irqctrler->addrs[0].address, 0x40);
- for (i = 0; i < 2; ++i)
- pmac_irq_hw[i] = (volatile struct pmac_irq_hw*)
- (addr + (2 - i) * 0x10);
- }
+ /* Get addresses of first controller if we have a node for it */
+ BUG_ON(of_address_to_resource(master, 0, &r));
- /* get addresses of second controller */
- irqctrler = irqctrler->next;
- if (irqctrler && irqctrler->n_addrs > 0) {
- addr = (unsigned long)
- ioremap(irqctrler->addrs[0].address, 0x40);
- for (i = 2; i < 4; ++i)
- pmac_irq_hw[i] = (volatile struct pmac_irq_hw*)
- (addr + (4 - i) * 0x10);
- irq_cascade = irqctrler->intrs[0].line;
- if (device_is_compatible(irqctrler, "gatwick"))
- pmac_fix_gatwick_interrupts(irqctrler, max_real_irqs);
- }
- } else {
- /* older powermacs have a GC (grand central) or ohare at
- f3000000, with interrupt control registers at f3000020. */
- addr = (unsigned long) ioremap(0xf3000000, 0x40);
- pmac_irq_hw[0] = (volatile struct pmac_irq_hw *) (addr + 0x20);
+ /* Map interrupts of primary controller */
+ addr = (u8 __iomem *) ioremap(r.start, 0x40);
+ i = 0;
+ pmac_irq_hw[i++] = (volatile struct pmac_irq_hw __iomem *)
+ (addr + 0x20);
+ if (max_real_irqs > 32)
+ pmac_irq_hw[i++] = (volatile struct pmac_irq_hw __iomem *)
+ (addr + 0x10);
+ of_node_put(master);
+
+ printk(KERN_INFO "irq: Found primary Apple PIC %s for %d irqs\n",
+ master->full_name, max_real_irqs);
+
+ /* Map interrupts of cascaded controller */
+ if (slave && !of_address_to_resource(slave, 0, &r)) {
+ addr = (u8 __iomem *)ioremap(r.start, 0x40);
+ pmac_irq_hw[i++] = (volatile struct pmac_irq_hw __iomem *)
+ (addr + 0x20);
+ if (max_irqs > 64)
+ pmac_irq_hw[i++] =
+ (volatile struct pmac_irq_hw __iomem *)
+ (addr + 0x10);
+ irq_cascade = slave->intrs[0].line;
+
+ printk(KERN_INFO "irq: Found slave Apple PIC %s for %d irqs"
+ " cascade: %d\n", slave->full_name,
+ max_irqs - max_real_irqs, irq_cascade);
}
-
- /* PowerBooks 3400 and 3500 can have a second controller in a second
- ohare chip, on the combo ethernet/modem card */
- if (machine_is_compatible("AAPL,3400/2400")
- || machine_is_compatible("AAPL,3500"))
- irq_cascade = enable_second_ohare();
+ of_node_put(slave);
/* disable all interrupts in all controllers */
for (i = 0; i * 32 < max_irqs; ++i)
out_le32(&pmac_irq_hw[i]->enable, 0);
+
/* mark level interrupts */
for (i = 0; i < max_irqs; i++)
if (level_mask[i >> 5] & (1UL << (i & 0x1f)))
irq_desc[i].status = IRQ_LEVEL;
- /* get interrupt line of secondary interrupt controller */
- if (irq_cascade >= 0) {
- printk(KERN_INFO "irq: secondary controller on irq %d\n",
- (int)irq_cascade);
+ /* Setup handlers for secondary controller and hook cascade irq*/
+ if (slave) {
for ( i = max_real_irqs ; i < max_irqs ; i++ )
irq_desc[i].handler = &gatwick_pic;
setup_irq(irq_cascade, &gatwick_cascade_action);
}
- printk("System has %d possible interrupts\n", max_irqs);
- if (max_irqs != max_real_irqs)
- printk(KERN_DEBUG "%d interrupts on main controller\n",
- max_real_irqs);
-
+ printk(KERN_INFO "irq: System has %d possible interrupts\n", max_irqs);
#ifdef CONFIG_XMON
setup_irq(20, &xmon_action);
-#endif /* CONFIG_XMON */
-#endif /* CONFIG_PPC32 */
+#endif
+}
+#endif /* CONFIG_PPC32 */
+
+static int pmac_u3_cascade(struct pt_regs *regs, void *data)
+{
+ return mpic_get_one_irq((struct mpic *)data, regs);
+}
+
+static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic)
+{
+#if defined(CONFIG_XMON) && defined(CONFIG_PPC32)
+ struct device_node* pswitch;
+ int nmi_irq;
+
+ pswitch = of_find_node_by_name(NULL, "programmer-switch");
+ if (pswitch && pswitch->n_intrs) {
+ nmi_irq = pswitch->intrs[0].line;
+ mpic_irq_set_priority(nmi_irq, 9);
+ setup_irq(nmi_irq, &xmon_action);
+ }
+ of_node_put(pswitch);
+#endif /* defined(CONFIG_XMON) && defined(CONFIG_PPC32) */
+}
+
+static struct mpic * __init pmac_setup_one_mpic(struct device_node *np,
+ int master)
+{
+ unsigned char senses[128];
+ int offset = master ? 0 : 128;
+ int count = master ? 128 : 124;
+ const char *name = master ? " MPIC 1 " : " MPIC 2 ";
+ struct resource r;
+ struct mpic *mpic;
+ unsigned int flags = master ? MPIC_PRIMARY : 0;
+ int rc;
+
+ rc = of_address_to_resource(np, 0, &r);
+ if (rc)
+ return NULL;
+
+ pmac_call_feature(PMAC_FTR_ENABLE_MPIC, np, 0, 0);
+
+ prom_get_irq_senses(senses, offset, offset + count);
+
+ flags |= MPIC_WANTS_RESET;
+ if (get_property(np, "big-endian", NULL))
+ flags |= MPIC_BIG_ENDIAN;
+
+ /* Primary Big Endian means HT interrupts. This is quite dodgy
+ * but works until I find a better way
+ */
+ if (master && (flags & MPIC_BIG_ENDIAN))
+ flags |= MPIC_BROKEN_U3;
+
+ mpic = mpic_alloc(r.start, flags, 0, offset, count, master ? 252 : 0,
+ senses, count, name);
+ if (mpic == NULL)
+ return NULL;
+
+ mpic_init(mpic);
+
+ return mpic;
+ }
+
+static int __init pmac_pic_probe_mpic(void)
+{
+ struct mpic *mpic1, *mpic2;
+ struct device_node *np, *master = NULL, *slave = NULL;
+
+ /* We can have up to 2 MPICs cascaded */
+ for (np = NULL; (np = of_find_node_by_type(np, "open-pic"))
+ != NULL;) {
+ if (master == NULL &&
+ get_property(np, "interrupts", NULL) == NULL)
+ master = of_node_get(np);
+ else if (slave == NULL)
+ slave = of_node_get(np);
+ if (master && slave)
+ break;
+ }
+
+ /* Check for bogus setups */
+ if (master == NULL && slave != NULL) {
+ master = slave;
+ slave = NULL;
+ }
+
+ /* Not found, default to good old pmac pic */
+ if (master == NULL)
+ return -ENODEV;
+
+ /* Set master handler */
+ ppc_md.get_irq = mpic_get_irq;
+
+ /* Setup master */
+ mpic1 = pmac_setup_one_mpic(master, 1);
+ BUG_ON(mpic1 == NULL);
+
+ /* Install NMI if any */
+ pmac_pic_setup_mpic_nmi(mpic1);
+
+ of_node_put(master);
+
+ /* No slave, let's go out */
+ if (slave == NULL || slave->n_intrs < 1)
+ return 0;
+
+ mpic2 = pmac_setup_one_mpic(slave, 0);
+ if (mpic2 == NULL) {
+ printk(KERN_ERR "Failed to setup slave MPIC\n");
+ of_node_put(slave);
+ return 0;
+ }
+ mpic_setup_cascade(slave->intrs[0].line, pmac_u3_cascade, mpic2);
+
+ of_node_put(slave);
+ return 0;
+}
+
+
+void __init pmac_pic_init(void)
+{
+ /* We first try to detect Apple's new Core99 chipset, since mac-io
+ * is quite different on those machines and contains an IBM MPIC2.
+ */
+ if (pmac_pic_probe_mpic() == 0)
+ return;
+
+#ifdef CONFIG_PPC32
+ pmac_pic_probe_oldstyle();
+#endif
}
#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h
index 2ad25e13423e..21c7b0f8f329 100644
--- a/arch/powerpc/platforms/powermac/pmac.h
+++ b/arch/powerpc/platforms/powermac/pmac.h
@@ -42,10 +42,6 @@ extern void pmac_ide_init_hwif_ports(hw_regs_t *hw,
unsigned long data_port, unsigned long ctrl_port, int *irq);
extern int pmac_nvram_init(void);
-
-extern struct hw_interrupt_type pmac_pic;
-
-void pmac_pic_init(void);
-int pmac_get_irq(struct pt_regs *regs);
+extern void pmac_pic_init(void);
#endif /* __PMAC_H__ */
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 7acb0546671f..3b1a9d4fcbc6 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -60,6 +60,7 @@
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/io.h>
+#include <asm/kexec.h>
#include <asm/pci-bridge.h>
#include <asm/ohare.h>
#include <asm/mediabay.h>
@@ -74,8 +75,8 @@
#include <asm/iommu.h>
#include <asm/smu.h>
#include <asm/pmc.h>
-#include <asm/mpic.h>
#include <asm/lmb.h>
+#include <asm/udbg.h>
#include "pmac.h"
@@ -321,16 +322,6 @@ void __init pmac_setup_arch(void)
l2cr_init();
#endif /* CONFIG_PPC32 */
-#ifdef CONFIG_PPC64
- /* Probe motherboard chipset */
- /* this is done earlier in setup_arch for 32-bit */
- pmac_feature_init();
-
- /* We can NAP */
- powersave_nap = 1;
- printk(KERN_INFO "Using native/NAP idle loop\n");
-#endif
-
#ifdef CONFIG_KGDB
zs_kgdb_hook(0);
#endif
@@ -354,7 +345,7 @@ void __init pmac_setup_arch(void)
#ifdef CONFIG_SMP
/* Check for Core99 */
- if (find_devices("uni-n") || find_devices("u3"))
+ if (find_devices("uni-n") || find_devices("u3") || find_devices("u4"))
smp_ops = &core99_smp_ops;
#ifdef CONFIG_PPC32
else
@@ -621,35 +612,31 @@ static void __init pmac_init_early(void)
* and call ioremap
*/
hpte_init_native();
+#endif
- /* Init SCC */
- if (strstr(cmd_line, "sccdbg")) {
- sccdbg = 1;
- udbg_init_scc(NULL);
+ /* Enable early btext debug if requested */
+ if (strstr(cmd_line, "btextdbg")) {
+ udbg_adb_init_early();
+ register_early_udbg_console();
}
- /* Setup interrupt mapping options */
- ppc64_interrupt_controller = IC_OPEN_PIC;
+ /* Probe motherboard chipset */
+ pmac_feature_init();
- iommu_init_early_u3();
-#endif
-}
+ /* We can NAP */
+ powersave_nap = 1;
+ printk(KERN_INFO "Using native/NAP idle loop\n");
+
+ /* Initialize debug stuff */
+ udbg_scc_init(!!strstr(cmd_line, "sccdbg"));
+ udbg_adb_init(!!strstr(cmd_line, "btextdbg"));
-static void __init pmac_progress(char *s, unsigned short hex)
-{
#ifdef CONFIG_PPC64
- if (sccdbg) {
- udbg_puts(s);
- udbg_puts("\n");
- return;
- }
+ /* Setup interrupt mapping options */
+ ppc64_interrupt_controller = IC_OPEN_PIC;
+
+ iommu_init_early_dart();
#endif
-#ifdef CONFIG_BOOTX_TEXT
- if (boot_text_mapped) {
- btext_drawstring(s);
- btext_drawchar('\n');
- }
-#endif /* CONFIG_BOOTX_TEXT */
}
/*
@@ -663,35 +650,14 @@ static int pmac_check_legacy_ioport(unsigned int baseport)
static int __init pmac_declare_of_platform_devices(void)
{
- struct device_node *np, *npp;
-
- np = find_devices("uni-n");
- if (np) {
- for (np = np->child; np != NULL; np = np->sibling)
- if (strncmp(np->name, "i2c", 3) == 0) {
- of_platform_device_create(np, "uni-n-i2c",
- NULL);
- break;
- }
- }
- np = find_devices("valkyrie");
+ struct device_node *np;
+
+ np = of_find_node_by_name(NULL, "valkyrie");
if (np)
of_platform_device_create(np, "valkyrie", NULL);
- np = find_devices("platinum");
+ np = of_find_node_by_name(NULL, "platinum");
if (np)
of_platform_device_create(np, "platinum", NULL);
-
- npp = of_find_node_by_name(NULL, "u3");
- if (npp) {
- for (np = NULL; (np = of_get_next_child(npp, np)) != NULL;) {
- if (strncmp(np->name, "i2c", 3) == 0) {
- of_platform_device_create(np, "u3-i2c", NULL);
- of_node_put(np);
- break;
- }
- }
- of_node_put(npp);
- }
np = of_find_node_by_type(NULL, "smu");
if (np) {
of_platform_device_create(np, "smu", NULL);
@@ -718,7 +684,7 @@ static int __init pmac_probe(int platform)
* occupies having to be broken up so the DART itself is not
* part of the cacheable linar mapping
*/
- alloc_u3_dart_table();
+ alloc_dart_table();
#endif
#ifdef CONFIG_PMAC_SMU
@@ -734,15 +700,17 @@ static int __init pmac_probe(int platform)
}
#ifdef CONFIG_PPC64
-static int pmac_probe_mode(struct pci_bus *bus)
+/* Move that to pci.c */
+static int pmac_pci_probe_mode(struct pci_bus *bus)
{
struct device_node *node = bus->sysdata;
/* We need to use normal PCI probing for the AGP bus,
- since the device for the AGP bridge isn't in the tree. */
- if (bus->self == NULL && device_is_compatible(node, "u3-agp"))
+ * since the device for the AGP bridge isn't in the tree.
+ */
+ if (bus->self == NULL && (device_is_compatible(node, "u3-agp") ||
+ device_is_compatible(node, "u4-pcie")))
return PCI_PROBE_NORMAL;
-
return PCI_PROBE_DEVTREE;
}
#endif
@@ -756,7 +724,7 @@ struct machdep_calls __initdata pmac_md = {
.init_early = pmac_init_early,
.show_cpuinfo = pmac_show_cpuinfo,
.init_IRQ = pmac_pic_init,
- .get_irq = mpic_get_irq, /* changed later */
+ .get_irq = NULL, /* changed later */
.pcibios_fixup = pmac_pcibios_fixup,
.restart = pmac_restart,
.power_off = pmac_power_off,
@@ -768,12 +736,17 @@ struct machdep_calls __initdata pmac_md = {
.calibrate_decr = pmac_calibrate_decr,
.feature_call = pmac_do_feature_call,
.check_legacy_ioport = pmac_check_legacy_ioport,
- .progress = pmac_progress,
+ .progress = udbg_progress,
#ifdef CONFIG_PPC64
- .pci_probe_mode = pmac_probe_mode,
+ .pci_probe_mode = pmac_pci_probe_mode,
.idle_loop = native_idle,
.enable_pmcs = power4_enable_pmcs,
+#ifdef CONFIG_KEXEC
+ .machine_kexec = default_machine_kexec,
+ .machine_kexec_prepare = default_machine_kexec_prepare,
+ .machine_crash_shutdown = default_machine_crash_shutdown,
#endif
+#endif /* CONFIG_PPC64 */
#ifdef CONFIG_PPC32
.pcibios_enable_device_hook = pmac_pci_enable_device_hook,
.pcibios_after_init = pmac_pcibios_after_init,
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index fb2a7c798e82..0df2cdcd805c 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -52,8 +52,9 @@
#include <asm/cacheflush.h>
#include <asm/keylargo.h>
#include <asm/pmac_low_i2c.h>
+#include <asm/pmac_pfunc.h>
-#undef DEBUG
+#define DEBUG
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
@@ -62,6 +63,7 @@
#endif
extern void __secondary_start_pmac_0(void);
+extern int pmac_pfunc_base_install(void);
#ifdef CONFIG_PPC32
@@ -361,7 +363,6 @@ static void __init psurge_dual_sync_tb(int cpu_nr)
set_dec(tb_ticks_per_jiffy);
/* XXX fixme */
set_tb(0, 0);
- last_jiffy_stamp(cpu_nr) = 0;
if (cpu_nr > 0) {
mb();
@@ -429,15 +430,62 @@ struct smp_ops_t psurge_smp_ops = {
};
#endif /* CONFIG_PPC32 - actually powersurge support */
+/*
+ * Core 99 and later support
+ */
+
+static void (*pmac_tb_freeze)(int freeze);
+static unsigned long timebase;
+static int tb_req;
+
+static void smp_core99_give_timebase(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ while(!tb_req)
+ barrier();
+ tb_req = 0;
+ (*pmac_tb_freeze)(1);
+ mb();
+ timebase = get_tb();
+ mb();
+ while (timebase)
+ barrier();
+ mb();
+ (*pmac_tb_freeze)(0);
+ mb();
+
+ local_irq_restore(flags);
+}
+
+
+static void __devinit smp_core99_take_timebase(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ tb_req = 1;
+ mb();
+ while (!timebase)
+ barrier();
+ mb();
+ set_tb(timebase >> 32, timebase & 0xffffffff);
+ timebase = 0;
+ mb();
+ set_dec(tb_ticks_per_jiffy/2);
+
+ local_irq_restore(flags);
+}
+
#ifdef CONFIG_PPC64
/*
* G5s enable/disable the timebase via an i2c-connected clock chip.
*/
-static struct device_node *pmac_tb_clock_chip_host;
+static struct pmac_i2c_bus *pmac_tb_clock_chip_host;
static u8 pmac_tb_pulsar_addr;
-static void (*pmac_tb_freeze)(int freeze);
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned long timebase;
static void smp_core99_cypress_tb_freeze(int freeze)
{
@@ -447,19 +495,20 @@ static void smp_core99_cypress_tb_freeze(int freeze)
/* Strangely, the device-tree says address is 0xd2, but darwin
* accesses 0xd0 ...
*/
- pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined);
- rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
- 0xd0 | pmac_low_i2c_read,
- 0x81, &data, 1);
+ pmac_i2c_setmode(pmac_tb_clock_chip_host,
+ pmac_i2c_mode_combined);
+ rc = pmac_i2c_xfer(pmac_tb_clock_chip_host,
+ 0xd0 | pmac_i2c_read,
+ 1, 0x81, &data, 1);
if (rc != 0)
goto bail;
data = (data & 0xf3) | (freeze ? 0x00 : 0x0c);
- pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub);
- rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
- 0xd0 | pmac_low_i2c_write,
- 0x81, &data, 1);
+ pmac_i2c_setmode(pmac_tb_clock_chip_host, pmac_i2c_mode_stdsub);
+ rc = pmac_i2c_xfer(pmac_tb_clock_chip_host,
+ 0xd0 | pmac_i2c_write,
+ 1, 0x81, &data, 1);
bail:
if (rc != 0) {
@@ -475,19 +524,20 @@ static void smp_core99_pulsar_tb_freeze(int freeze)
u8 data;
int rc;
- pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined);
- rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
- pmac_tb_pulsar_addr | pmac_low_i2c_read,
- 0x2e, &data, 1);
+ pmac_i2c_setmode(pmac_tb_clock_chip_host,
+ pmac_i2c_mode_combined);
+ rc = pmac_i2c_xfer(pmac_tb_clock_chip_host,
+ pmac_tb_pulsar_addr | pmac_i2c_read,
+ 1, 0x2e, &data, 1);
if (rc != 0)
goto bail;
data = (data & 0x88) | (freeze ? 0x11 : 0x22);
- pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub);
- rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
- pmac_tb_pulsar_addr | pmac_low_i2c_write,
- 0x2e, &data, 1);
+ pmac_i2c_setmode(pmac_tb_clock_chip_host, pmac_i2c_mode_stdsub);
+ rc = pmac_i2c_xfer(pmac_tb_clock_chip_host,
+ pmac_tb_pulsar_addr | pmac_i2c_write,
+ 1, 0x2e, &data, 1);
bail:
if (rc != 0) {
printk(KERN_ERR "Pulsar Timebase %s rc: %d\n",
@@ -496,54 +546,14 @@ static void smp_core99_pulsar_tb_freeze(int freeze)
}
}
-
-static void smp_core99_give_timebase(void)
-{
- /* Open i2c bus for synchronous access */
- if (pmac_low_i2c_open(pmac_tb_clock_chip_host, 0))
- panic("Can't open i2c for TB sync !\n");
-
- spin_lock(&timebase_lock);
- (*pmac_tb_freeze)(1);
- mb();
- timebase = get_tb();
- spin_unlock(&timebase_lock);
-
- while (timebase)
- barrier();
-
- spin_lock(&timebase_lock);
- (*pmac_tb_freeze)(0);
- spin_unlock(&timebase_lock);
-
- /* Close i2c bus */
- pmac_low_i2c_close(pmac_tb_clock_chip_host);
-}
-
-
-static void __devinit smp_core99_take_timebase(void)
-{
- while (!timebase)
- barrier();
- spin_lock(&timebase_lock);
- set_tb(timebase >> 32, timebase & 0xffffffff);
- timebase = 0;
- spin_unlock(&timebase_lock);
-}
-
-static void __init smp_core99_setup(int ncpus)
+static void __init smp_core99_setup_i2c_hwsync(int ncpus)
{
struct device_node *cc = NULL;
struct device_node *p;
+ const char *name = NULL;
u32 *reg;
int ok;
- /* HW sync only on these platforms */
- if (!machine_is_compatible("PowerMac7,2") &&
- !machine_is_compatible("PowerMac7,3") &&
- !machine_is_compatible("RackMac3,1"))
- return;
-
/* Look for the clock chip */
while ((cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL) {
p = of_get_parent(cc);
@@ -552,124 +562,86 @@ static void __init smp_core99_setup(int ncpus)
if (!ok)
continue;
+ pmac_tb_clock_chip_host = pmac_i2c_find_bus(cc);
+ if (pmac_tb_clock_chip_host == NULL)
+ continue;
reg = (u32 *)get_property(cc, "reg", NULL);
if (reg == NULL)
continue;
-
switch (*reg) {
case 0xd2:
- if (device_is_compatible(cc, "pulsar-legacy-slewing")) {
+ if (device_is_compatible(cc,"pulsar-legacy-slewing")) {
pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
pmac_tb_pulsar_addr = 0xd2;
- printk(KERN_INFO "Timebase clock is Pulsar chip\n");
+ name = "Pulsar";
} else if (device_is_compatible(cc, "cy28508")) {
pmac_tb_freeze = smp_core99_cypress_tb_freeze;
- printk(KERN_INFO "Timebase clock is Cypress chip\n");
+ name = "Cypress";
}
break;
case 0xd4:
pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
pmac_tb_pulsar_addr = 0xd4;
- printk(KERN_INFO "Timebase clock is Pulsar chip\n");
+ name = "Pulsar";
break;
}
- if (pmac_tb_freeze != NULL) {
- pmac_tb_clock_chip_host = of_get_parent(cc);
- of_node_put(cc);
+ if (pmac_tb_freeze != NULL)
break;
- }
}
- if (pmac_tb_freeze == NULL) {
- smp_ops->give_timebase = smp_generic_give_timebase;
- smp_ops->take_timebase = smp_generic_take_timebase;
+ if (pmac_tb_freeze != NULL) {
+ /* Open i2c bus for synchronous access */
+ if (pmac_i2c_open(pmac_tb_clock_chip_host, 1)) {
+ printk(KERN_ERR "Failed top open i2c bus for clock"
+ " sync, fallback to software sync !\n");
+ goto no_i2c_sync;
+ }
+ printk(KERN_INFO "Processor timebase sync using %s i2c clock\n",
+ name);
+ return;
}
+ no_i2c_sync:
+ pmac_tb_freeze = NULL;
+ pmac_tb_clock_chip_host = NULL;
}
-/* nothing to do here, caches are already set up by service processor */
-static inline void __devinit core99_init_caches(int cpu)
+
+
+/*
+ * Newer G5s uses a platform function
+ */
+
+static void smp_core99_pfunc_tb_freeze(int freeze)
{
+ struct device_node *cpus;
+ struct pmf_args args;
+
+ cpus = of_find_node_by_path("/cpus");
+ BUG_ON(cpus == NULL);
+ args.count = 1;
+ args.u[0].v = !freeze;
+ pmf_call_function(cpus, "cpu-timebase", &args);
+ of_node_put(cpus);
}
#else /* CONFIG_PPC64 */
/*
- * SMP G4 powermacs use a GPIO to enable/disable the timebase.
+ * SMP G4 use a GPIO to enable/disable the timebase.
*/
static unsigned int core99_tb_gpio; /* Timebase freeze GPIO */
-static unsigned int pri_tb_hi, pri_tb_lo;
-static unsigned int pri_tb_stamp;
-
-/* not __init, called in sleep/wakeup code */
-void smp_core99_give_timebase(void)
+static void smp_core99_gpio_tb_freeze(int freeze)
{
- unsigned long flags;
- unsigned int t;
-
- /* wait for the secondary to be in take_timebase */
- for (t = 100000; t > 0 && !sec_tb_reset; --t)
- udelay(10);
- if (!sec_tb_reset) {
- printk(KERN_WARNING "Timeout waiting sync on second CPU\n");
- return;
- }
-
- /* freeze the timebase and read it */
- /* disable interrupts so the timebase is disabled for the
- shortest possible time */
- local_irq_save(flags);
- pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 4);
+ if (freeze)
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 4);
+ else
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0);
pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0);
- mb();
- pri_tb_hi = get_tbu();
- pri_tb_lo = get_tbl();
- pri_tb_stamp = last_jiffy_stamp(smp_processor_id());
- mb();
-
- /* tell the secondary we're ready */
- sec_tb_reset = 2;
- mb();
-
- /* wait for the secondary to have taken it */
- /* note: can't use udelay here, since it needs the timebase running */
- for (t = 10000000; t > 0 && sec_tb_reset; --t)
- barrier();
- if (sec_tb_reset)
- /* XXX BUG_ON here? */
- printk(KERN_WARNING "Timeout waiting sync(2) on second CPU\n");
-
- /* Now, restart the timebase by leaving the GPIO to an open collector */
- pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0);
- pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0);
- local_irq_restore(flags);
}
-/* not __init, called in sleep/wakeup code */
-void smp_core99_take_timebase(void)
-{
- unsigned long flags;
-
- /* tell the primary we're here */
- sec_tb_reset = 1;
- mb();
-
- /* wait for the primary to set pri_tb_hi/lo */
- while (sec_tb_reset < 2)
- mb();
-
- /* set our stuff the same as the primary */
- local_irq_save(flags);
- set_dec(1);
- set_tb(pri_tb_hi, pri_tb_lo);
- last_jiffy_stamp(smp_processor_id()) = pri_tb_stamp;
- mb();
- /* tell the primary we're done */
- sec_tb_reset = 0;
- mb();
- local_irq_restore(flags);
-}
+#endif /* !CONFIG_PPC64 */
/* L2 and L3 cache settings to pass from CPU0 to CPU1 on G4 cpus */
volatile static long int core99_l2_cache;
@@ -677,6 +649,7 @@ volatile static long int core99_l3_cache;
static void __devinit core99_init_caches(int cpu)
{
+#ifndef CONFIG_PPC64
if (!cpu_has_feature(CPU_FTR_L2CR))
return;
@@ -702,30 +675,76 @@ static void __devinit core99_init_caches(int cpu)
_set_L3CR(core99_l3_cache);
printk("CPU%d: L3CR set to %lx\n", cpu, core99_l3_cache);
}
+#endif /* !CONFIG_PPC64 */
}
static void __init smp_core99_setup(int ncpus)
{
- struct device_node *cpu;
- u32 *tbprop = NULL;
- int i;
+#ifdef CONFIG_PPC64
+
+ /* i2c based HW sync on some G5s */
+ if (machine_is_compatible("PowerMac7,2") ||
+ machine_is_compatible("PowerMac7,3") ||
+ machine_is_compatible("RackMac3,1"))
+ smp_core99_setup_i2c_hwsync(ncpus);
- core99_tb_gpio = KL_GPIO_TB_ENABLE; /* default value */
- cpu = of_find_node_by_type(NULL, "cpu");
- if (cpu != NULL) {
- tbprop = (u32 *)get_property(cpu, "timebase-enable", NULL);
- if (tbprop)
- core99_tb_gpio = *tbprop;
- of_node_put(cpu);
+ /* pfunc based HW sync on recent G5s */
+ if (pmac_tb_freeze == NULL) {
+ struct device_node *cpus =
+ of_find_node_by_path("/cpus");
+ if (cpus &&
+ get_property(cpus, "platform-cpu-timebase", NULL)) {
+ pmac_tb_freeze = smp_core99_pfunc_tb_freeze;
+ printk(KERN_INFO "Processor timebase sync using"
+ " platform function\n");
+ }
}
- /* XXX should get this from reg properties */
- for (i = 1; i < ncpus; ++i)
- smp_hw_index[i] = i;
- powersave_nap = 0;
-}
+#else /* CONFIG_PPC64 */
+
+ /* GPIO based HW sync on ppc32 Core99 */
+ if (pmac_tb_freeze == NULL && !machine_is_compatible("MacRISC4")) {
+ struct device_node *cpu;
+ u32 *tbprop = NULL;
+
+ core99_tb_gpio = KL_GPIO_TB_ENABLE; /* default value */
+ cpu = of_find_node_by_type(NULL, "cpu");
+ if (cpu != NULL) {
+ tbprop = (u32 *)get_property(cpu, "timebase-enable",
+ NULL);
+ if (tbprop)
+ core99_tb_gpio = *tbprop;
+ of_node_put(cpu);
+ }
+ pmac_tb_freeze = smp_core99_gpio_tb_freeze;
+ printk(KERN_INFO "Processor timebase sync using"
+ " GPIO 0x%02x\n", core99_tb_gpio);
+ }
+
+#endif /* CONFIG_PPC64 */
+
+ /* No timebase sync, fallback to software */
+ if (pmac_tb_freeze == NULL) {
+ smp_ops->give_timebase = smp_generic_give_timebase;
+ smp_ops->take_timebase = smp_generic_take_timebase;
+ printk(KERN_INFO "Processor timebase sync using software\n");
+ }
+
+#ifndef CONFIG_PPC64
+ {
+ int i;
+
+ /* XXX should get this from reg properties */
+ for (i = 1; i < ncpus; ++i)
+ smp_hw_index[i] = i;
+ }
#endif
+ /* 32 bits SMP can't NAP */
+ if (!machine_is_compatible("MacRISC4"))
+ powersave_nap = 0;
+}
+
static int __init smp_core99_probe(void)
{
struct device_node *cpus;
@@ -743,8 +762,19 @@ static int __init smp_core99_probe(void)
if (ncpus <= 1)
return 1;
+ /* We need to perform some early initialisations before we can start
+ * setting up SMP as we are running before initcalls
+ */
+ pmac_pfunc_base_install();
+ pmac_i2c_init();
+
+ /* Setup various bits like timebase sync method, ability to nap, ... */
smp_core99_setup(ncpus);
+
+ /* Install IPIs */
mpic_request_ipis();
+
+ /* Collect l2cr and l3cr values from CPU 0 */
core99_init_caches(0);
return ncpus;
@@ -753,14 +783,15 @@ static int __init smp_core99_probe(void)
static void __devinit smp_core99_kick_cpu(int nr)
{
unsigned int save_vector;
- unsigned long new_vector;
- unsigned long flags;
+ unsigned long target, flags;
volatile unsigned int *vector
= ((volatile unsigned int *)(KERNELBASE+0x100));
if (nr < 0 || nr > 3)
return;
- if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu", 0x346);
+
+ if (ppc_md.progress)
+ ppc_md.progress("smp_core99_kick_cpu", 0x346);
local_irq_save(flags);
local_irq_disable();
@@ -768,14 +799,11 @@ static void __devinit smp_core99_kick_cpu(int nr)
/* Save reset vector */
save_vector = *vector;
- /* Setup fake reset vector that does
+ /* Setup fake reset vector that does
* b __secondary_start_pmac_0 + nr*8 - KERNELBASE
*/
- new_vector = (unsigned long) __secondary_start_pmac_0 + nr * 8;
- *vector = 0x48000002 + new_vector - KERNELBASE;
-
- /* flush data cache and inval instruction cache */
- flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
+ target = (unsigned long) __secondary_start_pmac_0 + nr * 8;
+ create_branch((unsigned long)vector, target, BRANCH_SET_LINK);
/* Put some life in our friend */
pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0);
@@ -805,17 +833,25 @@ static void __devinit smp_core99_setup_cpu(int cpu_nr)
mpic_setup_this_cpu();
if (cpu_nr == 0) {
-#ifdef CONFIG_POWER4
+#ifdef CONFIG_PPC64
extern void g5_phy_disable_cpu1(void);
+ /* Close i2c bus if it was used for tb sync */
+ if (pmac_tb_clock_chip_host) {
+ pmac_i2c_close(pmac_tb_clock_chip_host);
+ pmac_tb_clock_chip_host = NULL;
+ }
+
/* If we didn't start the second CPU, we must take
* it off the bus
*/
if (machine_is_compatible("MacRISC4") &&
num_online_cpus() < 2)
g5_phy_disable_cpu1();
-#endif /* CONFIG_POWER4 */
- if (ppc_md.progress) ppc_md.progress("core99_setup_cpu 0 done", 0x349);
+#endif /* CONFIG_PPC64 */
+
+ if (ppc_md.progress)
+ ppc_md.progress("core99_setup_cpu 0 done", 0x349);
}
}
diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c
index feb0a94e7819..5d9afa1fa02d 100644
--- a/arch/powerpc/platforms/powermac/time.c
+++ b/arch/powerpc/platforms/powermac/time.c
@@ -258,15 +258,20 @@ int __init via_calibrate_decr(void)
volatile unsigned char __iomem *via;
int count = VIA_TIMER_FREQ_6 / 100;
unsigned int dstart, dend;
+ struct resource rsrc;
- vias = find_devices("via-cuda");
+ vias = of_find_node_by_name(NULL, "via-cuda");
if (vias == 0)
- vias = find_devices("via-pmu");
+ vias = of_find_node_by_name(NULL, "via-pmu");
if (vias == 0)
- vias = find_devices("via");
- if (vias == 0 || vias->n_addrs == 0)
+ vias = of_find_node_by_name(NULL, "via");
+ if (vias == 0 || of_address_to_resource(vias, 0, &rsrc))
return 0;
- via = ioremap(vias->addrs[0].address, vias->addrs[0].size);
+ via = ioremap(rsrc.start, rsrc.end - rsrc.start + 1);
+ if (via == NULL) {
+ printk(KERN_ERR "Failed to map VIA for timer calibration !\n");
+ return 0;
+ }
/* set timer 1 for continuous interrupts */
out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT);
diff --git a/arch/powerpc/platforms/powermac/udbg_adb.c b/arch/powerpc/platforms/powermac/udbg_adb.c
new file mode 100644
index 000000000000..06c8265c2baf
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/udbg_adb.c
@@ -0,0 +1,221 @@
+#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/bitops.h>
+#include <linux/ptrace.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/cuda.h>
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/xmon.h>
+#include <asm/prom.h>
+#include <asm/bootx.h>
+#include <asm/machdep.h>
+#include <asm/errno.h>
+#include <asm/pmac_feature.h>
+#include <asm/processor.h>
+#include <asm/delay.h>
+#include <asm/btext.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+
+/*
+ * This implementation is "special", it can "patch" the current
+ * udbg implementation and work on top of it. It must thus be
+ * initialized last
+ */
+
+static void (*udbg_adb_old_putc)(char c);
+static int (*udbg_adb_old_getc)(void);
+static int (*udbg_adb_old_getc_poll)(void);
+
+static enum {
+ input_adb_none,
+ input_adb_pmu,
+ input_adb_cuda,
+} input_type = input_adb_none;
+
+int xmon_wants_key, xmon_adb_keycode;
+
+static inline void udbg_adb_poll(void)
+{
+#ifdef CONFIG_ADB_PMU
+ if (input_type == input_adb_pmu)
+ pmu_poll_adb();
+#endif /* CONFIG_ADB_PMU */
+#ifdef CONFIG_ADB_CUDA
+ if (input_type == input_adb_cuda)
+ cuda_poll();
+#endif /* CONFIG_ADB_CUDA */
+}
+
+#ifdef CONFIG_BOOTX_TEXT
+
+static int udbg_adb_use_btext;
+static int xmon_adb_shiftstate;
+
+static unsigned char xmon_keytab[128] =
+ "asdfhgzxcv\000bqwer" /* 0x00 - 0x0f */
+ "yt123465=97-80]o" /* 0x10 - 0x1f */
+ "u[ip\rlj'k;\\,/nm." /* 0x20 - 0x2f */
+ "\t `\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */
+ "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */
+ "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */
+
+static unsigned char xmon_shift_keytab[128] =
+ "ASDFHGZXCV\000BQWER" /* 0x00 - 0x0f */
+ "YT!@#$^%+(&_*)}O" /* 0x10 - 0x1f */
+ "U{IP\rLJ\"K:|<?NM>" /* 0x20 - 0x2f */
+ "\t ~\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */
+ "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */
+ "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */
+
+static int udbg_adb_local_getc(void)
+{
+ int k, t, on;
+
+ xmon_wants_key = 1;
+ for (;;) {
+ xmon_adb_keycode = -1;
+ t = 0;
+ on = 0;
+ k = -1;
+ do {
+ if (--t < 0) {
+ on = 1 - on;
+ btext_drawchar(on? 0xdb: 0x20);
+ btext_drawchar('\b');
+ t = 200000;
+ }
+ udbg_adb_poll();
+ if (udbg_adb_old_getc_poll)
+ k = udbg_adb_old_getc_poll();
+ } while (k == -1 && xmon_adb_keycode == -1);
+ if (on)
+ btext_drawstring(" \b");
+ if (k != -1)
+ return k;
+ k = xmon_adb_keycode;
+
+ /* test for shift keys */
+ if ((k & 0x7f) == 0x38 || (k & 0x7f) == 0x7b) {
+ xmon_adb_shiftstate = (k & 0x80) == 0;
+ continue;
+ }
+ if (k >= 0x80)
+ continue; /* ignore up transitions */
+ k = (xmon_adb_shiftstate? xmon_shift_keytab: xmon_keytab)[k];
+ if (k != 0)
+ break;
+ }
+ xmon_wants_key = 0;
+ return k;
+}
+#endif /* CONFIG_BOOTX_TEXT */
+
+static int udbg_adb_getc(void)
+{
+#ifdef CONFIG_BOOTX_TEXT
+ if (udbg_adb_use_btext && input_type != input_adb_none)
+ return udbg_adb_local_getc();
+#endif
+ if (udbg_adb_old_getc)
+ return udbg_adb_old_getc();
+ return -1;
+}
+
+/* getc_poll() is not really used, unless you have the xmon-over modem
+ * hack that doesn't quite concern us here, thus we just poll the low level
+ * ADB driver to prevent it from timing out and call back the original poll
+ * routine.
+ */
+static int udbg_adb_getc_poll(void)
+{
+ udbg_adb_poll();
+
+ if (udbg_adb_old_getc_poll)
+ return udbg_adb_old_getc_poll();
+ return -1;
+}
+
+static void udbg_adb_putc(char c)
+{
+#ifdef CONFIG_BOOTX_TEXT
+ if (udbg_adb_use_btext)
+ btext_drawchar(c);
+#endif
+ if (udbg_adb_old_putc)
+ return udbg_adb_old_putc(c);
+}
+
+void udbg_adb_init_early(void)
+{
+#ifdef CONFIG_BOOTX_TEXT
+ if (btext_find_display(1) == 0) {
+ udbg_adb_use_btext = 1;
+ udbg_putc = udbg_adb_putc;
+ }
+#endif
+}
+
+int udbg_adb_init(int force_btext)
+{
+ struct device_node *np;
+
+ /* Capture existing callbacks */
+ udbg_adb_old_putc = udbg_putc;
+ udbg_adb_old_getc = udbg_getc;
+ udbg_adb_old_getc_poll = udbg_getc_poll;
+
+ /* Check if our early init was already called */
+ if (udbg_adb_old_putc == udbg_adb_putc)
+ udbg_adb_old_putc = NULL;
+#ifdef CONFIG_BOOTX_TEXT
+ if (udbg_adb_old_putc == btext_drawchar)
+ udbg_adb_old_putc = NULL;
+#endif
+
+ /* Set ours as output */
+ udbg_putc = udbg_adb_putc;
+ udbg_getc = udbg_adb_getc;
+ udbg_getc_poll = udbg_adb_getc_poll;
+
+#ifdef CONFIG_BOOTX_TEXT
+ /* Check if we should use btext output */
+ if (btext_find_display(force_btext) == 0)
+ udbg_adb_use_btext = 1;
+#endif
+
+ /* See if there is a keyboard in the device tree with a parent
+ * of type "adb". If not, we return a failure, but we keep the
+ * bext output set for now
+ */
+ for (np = NULL; (np = of_find_node_by_name(np, "keyboard")) != NULL;) {
+ struct device_node *parent = of_get_parent(np);
+ int found = (parent && strcmp(parent->type, "adb") == 0);
+ of_node_put(parent);
+ if (found)
+ break;
+ }
+ if (np == NULL)
+ return -ENODEV;
+ of_node_put(np);
+
+#ifdef CONFIG_ADB_PMU
+ if (find_via_pmu())
+ input_type = input_adb_pmu;
+#endif
+#ifdef CONFIG_ADB_CUDA
+ if (find_via_cuda())
+ input_type = input_adb_cuda;
+#endif
+
+ /* Same as above: nothing found, keep btext set for output */
+ if (input_type == input_adb_none)
+ return -ENODEV;
+
+ return 0;
+}
diff --git a/arch/powerpc/kernel/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c
index 820c53551507..e87d53acfb61 100644
--- a/arch/powerpc/kernel/udbg_scc.c
+++ b/arch/powerpc/platforms/powermac/udbg_scc.c
@@ -25,7 +25,7 @@ extern void real_writeb(u8 data, volatile u8 __iomem *addr);
static volatile u8 __iomem *sccc;
static volatile u8 __iomem *sccd;
-static void udbg_scc_putc(unsigned char c)
+static void udbg_scc_putc(char c)
{
if (sccc) {
while ((in_8(sccc) & SCC_TXRDY) == 0)
@@ -47,14 +47,14 @@ static int udbg_scc_getc_poll(void)
return -1;
}
-static unsigned char udbg_scc_getc(void)
+static int udbg_scc_getc(void)
{
if (sccc) {
while ((in_8(sccc) & SCC_RXRDY) == 0)
;
return in_8(sccd);
}
- return 0;
+ return -1;
}
static unsigned char scc_inittab[] = {
@@ -67,38 +67,59 @@ static unsigned char scc_inittab[] = {
3, 0xc1, /* rx enable, 8 bits */
};
-void udbg_init_scc(struct device_node *np)
+void udbg_scc_init(int force_scc)
{
u32 *reg;
unsigned long addr;
+ struct device_node *stdout = NULL, *escc = NULL, *macio = NULL;
+ struct device_node *ch, *ch_def = NULL, *ch_a = NULL;
+ char *path;
int i, x;
- if (np == NULL)
- np = of_find_node_by_name(NULL, "escc");
- if (np == NULL || np->parent == NULL)
- return;
+ escc = of_find_node_by_name(NULL, "escc");
+ if (escc == NULL)
+ goto bail;
+ macio = of_get_parent(escc);
+ if (macio == NULL)
+ goto bail;
+ path = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
+ if (path != NULL)
+ stdout = of_find_node_by_path(path);
+ for (ch = NULL; (ch = of_get_next_child(escc, ch)) != NULL;) {
+ if (ch == stdout)
+ ch_def = of_node_get(ch);
+ if (strcmp(ch->name, "ch-a") == 0)
+ ch_a = of_node_get(ch);
+ }
+ if (ch_def == NULL && !force_scc)
+ goto bail;
+
+ ch = ch_def ? ch_def : ch_a;
- udbg_printf("found SCC...\n");
/* Get address within mac-io ASIC */
- reg = (u32 *)get_property(np, "reg", NULL);
+ reg = (u32 *)get_property(escc, "reg", NULL);
if (reg == NULL)
- return;
+ goto bail;
addr = reg[0];
- udbg_printf("local addr: %lx\n", addr);
+
/* Get address of mac-io PCI itself */
- reg = (u32 *)get_property(np->parent, "assigned-addresses", NULL);
+ reg = (u32 *)get_property(macio, "assigned-addresses", NULL);
if (reg == NULL)
- return;
+ goto bail;
addr += reg[2];
- udbg_printf("final addr: %lx\n", addr);
+
+ /* Lock the serial port */
+ pmac_call_feature(PMAC_FTR_SCC_ENABLE, ch,
+ PMAC_SCC_ASYNC | PMAC_SCC_FLAG_XMON, 1);
+
/* Setup for 57600 8N1 */
- addr += 0x20;
+ if (ch == ch_a)
+ addr += 0x20;
sccc = (volatile u8 * __iomem) ioremap(addr & PAGE_MASK, PAGE_SIZE) ;
sccc += addr & ~PAGE_MASK;
sccd = sccc + 0x10;
- udbg_printf("ioremap result sccc: %p\n", sccc);
mb();
for (i = 20000; i != 0; --i)
@@ -113,9 +134,17 @@ void udbg_init_scc(struct device_node *np)
udbg_getc_poll = udbg_scc_getc_poll;
udbg_puts("Hello World !\n");
+
+ bail:
+ of_node_put(macio);
+ of_node_put(escc);
+ of_node_put(stdout);
+ of_node_put(ch_def);
+ of_node_put(ch_a);
}
-static void udbg_real_scc_putc(unsigned char c)
+#ifdef CONFIG_PPC64
+static void udbg_real_scc_putc(char c)
{
while ((real_readb(sccc) & SCC_TXRDY) == 0)
;
@@ -133,3 +162,4 @@ void udbg_init_pmac_realmode(void)
udbg_getc = NULL;
udbg_getc_poll = NULL;
}
+#endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 06d5ef501218..6accdd155505 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -1,5 +1,5 @@
obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \
- setup.o iommu.o ras.o rtasd.o
+ setup.o iommu.o ras.o rtasd.o pci_dlpar.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_IBMVIO) += vio.o
obj-$(CONFIG_XICS) += xics.o
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index c8d2a40dc5b4..7fbfd16d72b7 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -1093,6 +1093,15 @@ void eeh_add_device_early(struct device_node *dn)
}
EXPORT_SYMBOL_GPL(eeh_add_device_early);
+void eeh_add_device_tree_early(struct device_node *dn)
+{
+ struct device_node *sib;
+ for (sib = dn->child; sib; sib = sib->sibling)
+ eeh_add_device_tree_early(sib);
+ eeh_add_device_early(dn);
+}
+EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
+
/**
* eeh_add_device_late - perform EEH initialization for the indicated pci device
* @dev: pci device for which to set up EEH
@@ -1147,6 +1156,23 @@ void eeh_remove_device(struct pci_dev *dev)
}
EXPORT_SYMBOL_GPL(eeh_remove_device);
+void eeh_remove_bus_device(struct pci_dev *dev)
+{
+ eeh_remove_device(dev);
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ struct pci_bus *bus = dev->subordinate;
+ struct list_head *ln;
+ if (!bus)
+ return;
+ for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
+ struct pci_dev *pdev = pci_dev_b(ln);
+ if (pdev)
+ eeh_remove_bus_device(pdev);
+ }
+ }
+}
+EXPORT_SYMBOL_GPL(eeh_remove_bus_device);
+
static int proc_eeh_show(struct seq_file *m, void *v)
{
unsigned int cpu;
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 2043659ea7b1..169f9148789c 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -436,7 +436,7 @@ static void iommu_bus_setup_pSeriesLP(struct pci_bus *bus)
return;
}
- ppci = pdn->data;
+ ppci = PCI_DN(pdn);
if (!ppci->iommu_table) {
/* Bussubno hasn't been copied yet.
* Do it now because iommu_table_setparms_lpar needs it.
@@ -483,10 +483,10 @@ static void iommu_dev_setup_pSeries(struct pci_dev *dev)
* an already allocated iommu table is found and use that.
*/
- while (dn && dn->data && PCI_DN(dn)->iommu_table == NULL)
+ while (dn && PCI_DN(dn) && PCI_DN(dn)->iommu_table == NULL)
dn = dn->parent;
- if (dn && dn->data) {
+ if (dn && PCI_DN(dn)) {
PCI_DN(mydn)->iommu_table = PCI_DN(dn)->iommu_table;
} else {
DBG("iommu_dev_setup_pSeries, dev %p (%s) has no iommu table\n", dev, pci_name(dev));
@@ -497,7 +497,7 @@ static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long acti
{
int err = NOTIFY_OK;
struct device_node *np = node;
- struct pci_dn *pci = np->data;
+ struct pci_dn *pci = PCI_DN(np);
switch (action) {
case PSERIES_RECONFIG_REMOVE:
@@ -533,7 +533,7 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev)
*/
dn = pci_device_to_OF_node(dev);
- for (pdn = dn; pdn && pdn->data && !PCI_DN(pdn)->iommu_table;
+ for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->iommu_table;
pdn = pdn->parent) {
dma_window = (unsigned int *)
get_property(pdn, "ibm,dma-window", NULL);
@@ -552,7 +552,7 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev)
DBG("Found DMA window, allocating table\n");
}
- pci = pdn->data;
+ pci = PCI_DN(pdn);
if (!pci->iommu_table) {
/* iommu_table_setparms_lpar needs bussubno. */
pci->bussubno = pci->phb->bus->number;
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index cf1bc11b3346..1fe445ab78a6 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -24,6 +24,7 @@
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/dma-mapping.h>
+#include <linux/console.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/page.h>
@@ -60,7 +61,7 @@ extern void pSeries_find_serial_port(void);
int vtermno; /* virtual terminal# for udbg */
#define __ALIGNED__ __attribute__((__aligned__(sizeof(long))))
-static void udbg_hvsi_putc(unsigned char c)
+static void udbg_hvsi_putc(char c)
{
/* packet's seqno isn't used anyways */
uint8_t packet[] __ALIGNED__ = { 0xff, 5, 0, 0, c };
@@ -111,7 +112,7 @@ static int udbg_hvsi_getc_poll(void)
return ch;
}
-static unsigned char udbg_hvsi_getc(void)
+static int udbg_hvsi_getc(void)
{
int ch;
for (;;) {
@@ -127,7 +128,7 @@ static unsigned char udbg_hvsi_getc(void)
}
}
-static void udbg_putcLP(unsigned char c)
+static void udbg_putcLP(char c)
{
char buf[16];
unsigned long rc;
@@ -172,7 +173,7 @@ static int udbg_getc_pollLP(void)
return ch;
}
-static unsigned char udbg_getcLP(void)
+static int udbg_getcLP(void)
{
int ch;
for (;;) {
@@ -191,7 +192,7 @@ static unsigned char udbg_getcLP(void)
/* call this from early_init() for a working debug console on
* vterm capable LPAR machines
*/
-void udbg_init_debug_lpar(void)
+void __init udbg_init_debug_lpar(void)
{
vtermno = 0;
udbg_putc = udbg_putcLP;
@@ -200,63 +201,54 @@ void udbg_init_debug_lpar(void)
}
/* returns 0 if couldn't find or use /chosen/stdout as console */
-int find_udbg_vterm(void)
+void __init find_udbg_vterm(void)
{
struct device_node *stdout_node;
u32 *termno;
char *name;
- int found = 0;
+ int add_console;
/* find the boot console from /chosen/stdout */
if (!of_chosen)
- return 0;
+ return;
name = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
if (name == NULL)
- return 0;
+ return;
stdout_node = of_find_node_by_path(name);
if (!stdout_node)
- return 0;
-
- /* now we have the stdout node; figure out what type of device it is. */
+ return;
name = (char *)get_property(stdout_node, "name", NULL);
if (!name) {
printk(KERN_WARNING "stdout node missing 'name' property!\n");
goto out;
}
+ /* The user has requested a console so this is already set up. */
+ add_console = !strstr(cmd_line, "console=");
- if (strncmp(name, "vty", 3) == 0) {
- if (device_is_compatible(stdout_node, "hvterm1")) {
- termno = (u32 *)get_property(stdout_node, "reg", NULL);
- if (termno) {
- vtermno = termno[0];
- udbg_putc = udbg_putcLP;
- udbg_getc = udbg_getcLP;
- udbg_getc_poll = udbg_getc_pollLP;
- found = 1;
- }
- } else if (device_is_compatible(stdout_node, "hvterm-protocol")) {
- termno = (u32 *)get_property(stdout_node, "reg", NULL);
- if (termno) {
- vtermno = termno[0];
- udbg_putc = udbg_hvsi_putc;
- udbg_getc = udbg_hvsi_getc;
- udbg_getc_poll = udbg_hvsi_getc_poll;
- found = 1;
- }
- }
- } else if (strncmp(name, "serial", 6)) {
- /* XXX fix ISA serial console */
- printk(KERN_WARNING "serial stdout on LPAR ('%s')! "
- "can't print udbg messages\n",
- stdout_node->full_name);
- } else {
- printk(KERN_WARNING "don't know how to print to stdout '%s'\n",
- stdout_node->full_name);
+ /* Check if it's a virtual terminal */
+ if (strncmp(name, "vty", 3) != 0)
+ goto out;
+ termno = (u32 *)get_property(stdout_node, "reg", NULL);
+ if (termno == NULL)
+ goto out;
+ vtermno = termno[0];
+
+ if (device_is_compatible(stdout_node, "hvterm1")) {
+ udbg_putc = udbg_putcLP;
+ udbg_getc = udbg_getcLP;
+ udbg_getc_poll = udbg_getc_pollLP;
+ if (add_console)
+ add_preferred_console("hvc", termno[0] & 0xff, NULL);
+ } else if (device_is_compatible(stdout_node, "hvterm-protocol")) {
+ vtermno = termno[0];
+ udbg_putc = udbg_hvsi_putc;
+ udbg_getc = udbg_hvsi_getc;
+ udbg_getc_poll = udbg_hvsi_getc_poll;
+ if (add_console)
+ add_preferred_console("hvsi", termno[0] & 0xff, NULL);
}
-
out:
of_node_put(stdout_node);
- return found;
}
void vpa_init(int cpu)
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
new file mode 100644
index 000000000000..21934784f936
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -0,0 +1,174 @@
+/*
+ * PCI Dynamic LPAR, PCI Hot Plug and PCI EEH recovery code
+ * for RPA-compliant PPC64 platform.
+ * Copyright (C) 2003 Linda Xie <lxie@us.ibm.com>
+ * Copyright (C) 2005 International Business Machines
+ *
+ * Updates, 2005, John Rose <johnrose@austin.ibm.com>
+ * Updates, 2005, Linas Vepstas <linas@austin.ibm.com>
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/pci.h>
+#include <asm/pci-bridge.h>
+
+static struct pci_bus *
+find_bus_among_children(struct pci_bus *bus,
+ struct device_node *dn)
+{
+ struct pci_bus *child = NULL;
+ struct list_head *tmp;
+ struct device_node *busdn;
+
+ busdn = pci_bus_to_OF_node(bus);
+ if (busdn == dn)
+ return bus;
+
+ list_for_each(tmp, &bus->children) {
+ child = find_bus_among_children(pci_bus_b(tmp), dn);
+ if (child)
+ break;
+ };
+ return child;
+}
+
+struct pci_bus *
+pcibios_find_pci_bus(struct device_node *dn)
+{
+ struct pci_dn *pdn = dn->data;
+
+ if (!pdn || !pdn->phb || !pdn->phb->bus)
+ return NULL;
+
+ return find_bus_among_children(pdn->phb->bus, dn);
+}
+
+/**
+ * pcibios_remove_pci_devices - remove all devices under this bus
+ *
+ * Remove all of the PCI devices under this bus both from the
+ * linux pci device tree, and from the powerpc EEH address cache.
+ */
+void
+pcibios_remove_pci_devices(struct pci_bus *bus)
+{
+ struct pci_dev *dev, *tmp;
+
+ list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
+ eeh_remove_bus_device(dev);
+ pci_remove_bus_device(dev);
+ }
+}
+
+/* Must be called before pci_bus_add_devices */
+void
+pcibios_fixup_new_pci_devices(struct pci_bus *bus, int fix_bus)
+{
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ /*
+ * Skip already-present devices (which are on the
+ * global device list.)
+ */
+ if (list_empty(&dev->global_list)) {
+ int i;
+
+ /* Need to setup IOMMU tables */
+ ppc_md.iommu_dev_setup(dev);
+
+ if(fix_bus)
+ pcibios_fixup_device_resources(dev, bus);
+ pci_read_irq_line(dev);
+ for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+ struct resource *r = &dev->resource[i];
+
+ if (r->parent || !r->start || !r->flags)
+ continue;
+ pci_claim_resource(dev, i);
+ }
+ }
+ }
+}
+
+static int
+pcibios_pci_config_bridge(struct pci_dev *dev)
+{
+ u8 sec_busno;
+ struct pci_bus *child_bus;
+ struct pci_dev *child_dev;
+
+ /* Get busno of downstream bus */
+ pci_read_config_byte(dev, PCI_SECONDARY_BUS, &sec_busno);
+
+ /* Add to children of PCI bridge dev->bus */
+ child_bus = pci_add_new_bus(dev->bus, dev, sec_busno);
+ if (!child_bus) {
+ printk (KERN_ERR "%s: could not add second bus\n", __FUNCTION__);
+ return -EIO;
+ }
+ sprintf(child_bus->name, "PCI Bus #%02x", child_bus->number);
+
+ pci_scan_child_bus(child_bus);
+
+ list_for_each_entry(child_dev, &child_bus->devices, bus_list) {
+ eeh_add_device_late(child_dev);
+ }
+
+ /* Fixup new pci devices without touching bus struct */
+ pcibios_fixup_new_pci_devices(child_bus, 0);
+
+ /* Make the discovered devices available */
+ pci_bus_add_devices(child_bus);
+ return 0;
+}
+
+/**
+ * pcibios_add_pci_devices - adds new pci devices to bus
+ *
+ * This routine will find and fixup new pci devices under
+ * the indicated bus. This routine presumes that there
+ * might already be some devices under this bridge, so
+ * it carefully tries to add only new devices. (And that
+ * is how this routine differs from other, similar pcibios
+ * routines.)
+ */
+void
+pcibios_add_pci_devices(struct pci_bus * bus)
+{
+ int slotno, num;
+ struct pci_dev *dev;
+ struct device_node *dn = pci_bus_to_OF_node(bus);
+
+ eeh_add_device_tree_early(dn);
+
+ /* pci_scan_slot should find all children */
+ slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
+ num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
+ if (num) {
+ pcibios_fixup_new_pci_devices(bus, 1);
+ pci_bus_add_devices(bus);
+ }
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ eeh_add_device_late (dev);
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+ pcibios_pci_config_bridge(dev);
+ }
+}
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index fbd214d68b07..b046bcf7443d 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -49,14 +49,14 @@
#include <asm/machdep.h>
#include <asm/rtas.h>
#include <asm/udbg.h>
+#include <asm/firmware.h>
+
+#include "ras.h"
static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX];
static DEFINE_SPINLOCK(ras_log_buf_lock);
-char mce_data_buf[RTAS_ERROR_LOG_MAX]
-;
-/* This is true if we are using the firmware NMI handler (typically LPAR) */
-extern int fwnmi_active;
+char mce_data_buf[RTAS_ERROR_LOG_MAX];
static int ras_get_sensor_state_token;
static int ras_check_exception_token;
@@ -280,7 +280,7 @@ static void fwnmi_release_errinfo(void)
printk("FWNMI: nmi-interlock failed: %d\n", ret);
}
-void pSeries_system_reset_exception(struct pt_regs *regs)
+int pSeries_system_reset_exception(struct pt_regs *regs)
{
if (fwnmi_active) {
struct rtas_error_log *errhdr = fwnmi_get_errinfo(regs);
@@ -289,6 +289,7 @@ void pSeries_system_reset_exception(struct pt_regs *regs)
}
fwnmi_release_errinfo();
}
+ return 0; /* need to perform reset */
}
/*
diff --git a/arch/powerpc/platforms/pseries/ras.h b/arch/powerpc/platforms/pseries/ras.h
new file mode 100644
index 000000000000..0e66b0da55e2
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/ras.h
@@ -0,0 +1,9 @@
+#ifndef _PSERIES_RAS_H
+#define _PSERIES_RAS_H
+
+struct pt_regs;
+
+extern int pSeries_system_reset_exception(struct pt_regs *regs);
+extern int pSeries_machine_check_exception(struct pt_regs *regs);
+
+#endif /* _PSERIES_RAS_H */
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 4a465f067ede..8903cf63236a 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -56,6 +56,7 @@
#include <asm/dma.h>
#include <asm/machdep.h>
#include <asm/irq.h>
+#include <asm/kexec.h>
#include <asm/time.h>
#include <asm/nvram.h>
#include "xics.h"
@@ -68,6 +69,7 @@
#include <asm/smp.h>
#include "plpar_wrappers.h"
+#include "ras.h"
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
@@ -76,16 +78,9 @@
#endif
extern void find_udbg_vterm(void);
-extern void system_reset_fwnmi(void); /* from head.S */
-extern void machine_check_fwnmi(void); /* from head.S */
-extern void generic_find_legacy_serial_ports(u64 *physport,
- unsigned int *default_speed);
int fwnmi_active; /* TRUE if an FWNMI handler is present */
-extern void pSeries_system_reset_exception(struct pt_regs *regs);
-extern int pSeries_machine_check_exception(struct pt_regs *regs);
-
static void pseries_shared_idle(void);
static void pseries_dedicated_idle(void);
@@ -105,18 +100,22 @@ void pSeries_show_cpuinfo(struct seq_file *m)
/* Initialize firmware assisted non-maskable interrupts if
* the firmware supports this feature.
- *
*/
static void __init fwnmi_init(void)
{
- int ret;
+ unsigned long system_reset_addr, machine_check_addr;
+
int ibm_nmi_register = rtas_token("ibm,nmi-register");
if (ibm_nmi_register == RTAS_UNKNOWN_SERVICE)
return;
- ret = rtas_call(ibm_nmi_register, 2, 1, NULL,
- __pa((unsigned long)system_reset_fwnmi),
- __pa((unsigned long)machine_check_fwnmi));
- if (ret == 0)
+
+ /* If the kernel's not linked at zero we point the firmware at low
+ * addresses anyway, and use a trampoline to get to the real code. */
+ system_reset_addr = __pa(system_reset_fwnmi) - PHYSICAL_START;
+ machine_check_addr = __pa(machine_check_fwnmi) - PHYSICAL_START;
+
+ if (0 == rtas_call(ibm_nmi_register, 2, 1, NULL, system_reset_addr,
+ machine_check_addr))
fwnmi_active = 1;
}
@@ -323,15 +322,18 @@ static void __init pSeries_discover_pic(void)
ppc64_interrupt_controller = IC_INVALID;
for (np = NULL; (np = of_find_node_by_name(np, "interrupt-controller"));) {
typep = (char *)get_property(np, "compatible", NULL);
- if (strstr(typep, "open-pic"))
+ if (strstr(typep, "open-pic")) {
ppc64_interrupt_controller = IC_OPEN_PIC;
- else if (strstr(typep, "ppc-xicp"))
+ break;
+ } else if (strstr(typep, "ppc-xicp")) {
ppc64_interrupt_controller = IC_PPC_XIC;
- else
- printk("pSeries_discover_pic: failed to recognize"
- " interrupt-controller\n");
- break;
+ break;
+ }
}
+ if (ppc64_interrupt_controller == IC_INVALID)
+ printk("pSeries_discover_pic: failed to recognize"
+ " interrupt-controller\n");
+
}
static void pSeries_mach_cpu_die(void)
@@ -365,10 +367,7 @@ static int pseries_set_xdabr(unsigned long dabr)
*/
static void __init pSeries_init_early(void)
{
- void *comport;
int iommu_off = 0;
- unsigned int default_speed;
- u64 physport;
DBG(" -> pSeries_init_early()\n");
@@ -382,17 +381,8 @@ static void __init pSeries_init_early(void)
get_property(of_chosen, "linux,iommu-off", NULL));
}
- generic_find_legacy_serial_ports(&physport, &default_speed);
-
if (platform_is_lpar())
find_udbg_vterm();
- else if (physport) {
- /* Map the uart for udbg. */
- comport = (void *)ioremap(physport, 16);
- udbg_init_uart(comport, default_speed);
-
- DBG("Hello World !\n");
- }
if (firmware_has_feature(FW_FEATURE_DABR))
ppc_md.set_dabr = pseries_set_dabr;
@@ -638,5 +628,8 @@ struct machdep_calls __initdata pSeries_md = {
.machine_check_exception = pSeries_machine_check_exception,
#ifdef CONFIG_KEXEC
.kexec_cpu_down = pseries_kexec_cpu_down,
+ .machine_kexec = default_machine_kexec,
+ .machine_kexec_prepare = default_machine_kexec_prepare,
+ .machine_crash_shutdown = default_machine_crash_shutdown,
#endif
};
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index 0377decc0719..0c0cfa32eb58 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -407,7 +407,7 @@ irqreturn_t xics_ipi_action(int irq, void *dev_id, struct pt_regs *regs)
smp_message_recv(PPC_MSG_MIGRATE_TASK, regs);
}
#endif
-#ifdef CONFIG_DEBUGGER
+#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
if (test_and_clear_bit(PPC_MSG_DEBUGGER_BREAK,
&xics_ipi_message[cpu].value)) {
mb();
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 6b7efcfc352a..14b9abde2d27 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -4,5 +4,6 @@ obj-$(CONFIG_PPC_I8259) += i8259.o
obj-$(CONFIG_PPC_MPC106) += grackle.o
obj-$(CONFIG_BOOKE) += dcr.o
obj-$(CONFIG_40x) += dcr.o
-obj-$(CONFIG_U3_DART) += u3_iommu.o
+obj-$(CONFIG_U3_DART) += dart_iommu.o
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
+obj-$(CONFIG_83xx) += ipic.o
diff --git a/arch/powerpc/sysdev/dart.h b/arch/powerpc/sysdev/dart.h
index 33ed9ed7fc1e..c2d05763ccbe 100644
--- a/arch/powerpc/sysdev/dart.h
+++ b/arch/powerpc/sysdev/dart.h
@@ -20,29 +20,44 @@
#define _POWERPC_SYSDEV_DART_H
-/* physical base of DART registers */
-#define DART_BASE 0xf8033000UL
-
/* Offset from base to control register */
-#define DARTCNTL 0
+#define DART_CNTL 0
+
/* Offset from base to exception register */
-#define DARTEXCP 0x10
+#define DART_EXCP_U3 0x10
/* Offset from base to TLB tag registers */
-#define DARTTAG 0x1000
+#define DART_TAGS_U3 0x1000
+/* U4 registers */
+#define DART_BASE_U4 0x10
+#define DART_SIZE_U4 0x20
+#define DART_EXCP_U4 0x30
+#define DART_TAGS_U4 0x1000
/* Control Register fields */
-/* base address of table (pfn) */
-#define DARTCNTL_BASE_MASK 0xfffff
-#define DARTCNTL_BASE_SHIFT 12
+/* U3 registers */
+#define DART_CNTL_U3_BASE_MASK 0xfffff
+#define DART_CNTL_U3_BASE_SHIFT 12
+#define DART_CNTL_U3_FLUSHTLB 0x400
+#define DART_CNTL_U3_ENABLE 0x200
+#define DART_CNTL_U3_SIZE_MASK 0x1ff
+#define DART_CNTL_U3_SIZE_SHIFT 0
+
+/* U4 registers */
+#define DART_BASE_U4_BASE_MASK 0xffffff
+#define DART_BASE_U4_BASE_SHIFT 0
+#define DART_CNTL_U4_FLUSHTLB 0x20000000
+#define DART_CNTL_U4_ENABLE 0x80000000
+#define DART_SIZE_U4_SIZE_MASK 0x1fff
+#define DART_SIZE_U4_SIZE_SHIFT 0
+
+#define DART_REG(r) (dart + ((r) >> 2))
+#define DART_IN(r) (in_be32(DART_REG(r)))
+#define DART_OUT(r,v) (out_be32(DART_REG(r), (v)))
-#define DARTCNTL_FLUSHTLB 0x400
-#define DARTCNTL_ENABLE 0x200
/* size of table in pages */
-#define DARTCNTL_SIZE_MASK 0x1ff
-#define DARTCNTL_SIZE_SHIFT 0
/* DART table fields */
diff --git a/arch/powerpc/sysdev/u3_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index 5c1a26a6d00c..e00b46b9514e 100644
--- a/arch/powerpc/sysdev/u3_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -1,25 +1,27 @@
/*
- * arch/powerpc/sysdev/u3_iommu.c
+ * arch/powerpc/sysdev/dart_iommu.c
*
* Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
+ * Copyright (C) 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>,
+ * IBM Corporation
*
* Based on pSeries_iommu.c:
* Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
* Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
*
- * Dynamic DMA mapping support, Apple U3 & IBM CPC925 "DART" iommu.
+ * Dynamic DMA mapping support, Apple U3, U4 & IBM CPC925 "DART" iommu.
+ *
*
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
- *
+ *
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
+ *
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
@@ -57,21 +59,22 @@ static unsigned long dart_tablesize;
static u32 *dart_vbase;
/* Mapped base address for the dart */
-static unsigned int *dart;
+static unsigned int *__iomem dart;
/* Dummy val that entries are set to when unused */
static unsigned int dart_emptyval;
-static struct iommu_table iommu_table_u3;
-static int iommu_table_u3_inited;
+static struct iommu_table iommu_table_dart;
+static int iommu_table_dart_inited;
static int dart_dirty;
+static int dart_is_u4;
#define DBG(...)
static inline void dart_tlb_invalidate_all(void)
{
unsigned long l = 0;
- unsigned int reg;
+ unsigned int reg, inv_bit;
unsigned long limit;
DBG("dart: flush\n");
@@ -81,29 +84,28 @@ static inline void dart_tlb_invalidate_all(void)
*
* Gotcha: Sometimes, the DART won't detect that the bit gets
* set. If so, clear it and set it again.
- */
+ */
limit = 0;
+ inv_bit = dart_is_u4 ? DART_CNTL_U4_FLUSHTLB : DART_CNTL_U3_FLUSHTLB;
retry:
- reg = in_be32((unsigned int *)dart+DARTCNTL);
- reg |= DARTCNTL_FLUSHTLB;
- out_be32((unsigned int *)dart+DARTCNTL, reg);
-
l = 0;
- while ((in_be32((unsigned int *)dart+DARTCNTL) & DARTCNTL_FLUSHTLB) &&
- l < (1L<<limit)) {
+ reg = DART_IN(DART_CNTL);
+ reg |= inv_bit;
+ DART_OUT(DART_CNTL, reg);
+
+ while ((DART_IN(DART_CNTL) & inv_bit) && l < (1L << limit))
l++;
- }
- if (l == (1L<<limit)) {
+ if (l == (1L << limit)) {
if (limit < 4) {
limit++;
- reg = in_be32((unsigned int *)dart+DARTCNTL);
- reg &= ~DARTCNTL_FLUSHTLB;
- out_be32((unsigned int *)dart+DARTCNTL, reg);
+ reg = DART_IN(DART_CNTL);
+ reg &= ~inv_bit;
+ DART_OUT(DART_CNTL, reg);
goto retry;
} else
- panic("U3-DART: TLB did not flush after waiting a long "
+ panic("DART: TLB did not flush after waiting a long "
"time. Buggy U3 ?");
}
}
@@ -115,7 +117,7 @@ static void dart_flush(struct iommu_table *tbl)
dart_dirty = 0;
}
-static void dart_build(struct iommu_table *tbl, long index,
+static void dart_build(struct iommu_table *tbl, long index,
long npages, unsigned long uaddr,
enum dma_data_direction direction)
{
@@ -128,7 +130,7 @@ static void dart_build(struct iommu_table *tbl, long index,
npages <<= DART_PAGE_FACTOR;
dp = ((unsigned int*)tbl->it_base) + index;
-
+
/* On U3, all memory is contigous, so we can move this
* out of the loop.
*/
@@ -148,7 +150,7 @@ static void dart_build(struct iommu_table *tbl, long index,
static void dart_free(struct iommu_table *tbl, long index, long npages)
{
unsigned int *dp;
-
+
/* We don't worry about flushing the TLB cache. The only drawback of
* not doing it is that we won't catch buggy device drivers doing
* bad DMAs, but then no 32-bit architecture ever does either.
@@ -160,7 +162,7 @@ static void dart_free(struct iommu_table *tbl, long index, long npages)
npages <<= DART_PAGE_FACTOR;
dp = ((unsigned int *)tbl->it_base) + index;
-
+
while (npages--)
*(dp++) = dart_emptyval;
}
@@ -168,20 +170,25 @@ static void dart_free(struct iommu_table *tbl, long index, long npages)
static int dart_init(struct device_node *dart_node)
{
- unsigned int regword;
unsigned int i;
- unsigned long tmp;
+ unsigned long tmp, base, size;
+ struct resource r;
if (dart_tablebase == 0 || dart_tablesize == 0) {
- printk(KERN_INFO "U3-DART: table not allocated, using direct DMA\n");
+ printk(KERN_INFO "DART: table not allocated, using "
+ "direct DMA\n");
return -ENODEV;
}
+ if (of_address_to_resource(dart_node, 0, &r))
+ panic("DART: can't get register base ! ");
+
/* Make sure nothing from the DART range remains in the CPU cache
* from a previous mapping that existed before the kernel took
* over
*/
- flush_dcache_phys_range(dart_tablebase, dart_tablebase + dart_tablesize);
+ flush_dcache_phys_range(dart_tablebase,
+ dart_tablebase + dart_tablesize);
/* Allocate a spare page to map all invalid DART pages. We need to do
* that to work around what looks like a problem with the HT bridge
@@ -189,21 +196,16 @@ static int dart_init(struct device_node *dart_node)
*/
tmp = lmb_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE);
if (!tmp)
- panic("U3-DART: Cannot allocate spare page!");
- dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) & DARTMAP_RPNMASK);
+ panic("DART: Cannot allocate spare page!");
+ dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) &
+ DARTMAP_RPNMASK);
- /* Map in DART registers. FIXME: Use device node to get base address */
- dart = ioremap(DART_BASE, 0x7000);
+ /* Map in DART registers */
+ dart = ioremap(r.start, r.end - r.start + 1);
if (dart == NULL)
- panic("U3-DART: Cannot map registers!");
+ panic("DART: Cannot map registers!");
- /* Set initial control register contents: table base,
- * table size and enable bit
- */
- regword = DARTCNTL_ENABLE |
- ((dart_tablebase >> DART_PAGE_SHIFT) << DARTCNTL_BASE_SHIFT) |
- (((dart_tablesize >> DART_PAGE_SHIFT) & DARTCNTL_SIZE_MASK)
- << DARTCNTL_SIZE_SHIFT);
+ /* Map in DART table */
dart_vbase = ioremap(virt_to_abs(dart_tablebase), dart_tablesize);
/* Fill initial table */
@@ -211,36 +213,50 @@ static int dart_init(struct device_node *dart_node)
dart_vbase[i] = dart_emptyval;
/* Initialize DART with table base and enable it. */
- out_be32((unsigned int *)dart, regword);
+ base = dart_tablebase >> DART_PAGE_SHIFT;
+ size = dart_tablesize >> DART_PAGE_SHIFT;
+ if (dart_is_u4) {
+ size &= DART_SIZE_U4_SIZE_MASK;
+ DART_OUT(DART_BASE_U4, base);
+ DART_OUT(DART_SIZE_U4, size);
+ DART_OUT(DART_CNTL, DART_CNTL_U4_ENABLE);
+ } else {
+ size &= DART_CNTL_U3_SIZE_MASK;
+ DART_OUT(DART_CNTL,
+ DART_CNTL_U3_ENABLE |
+ (base << DART_CNTL_U3_BASE_SHIFT) |
+ (size << DART_CNTL_U3_SIZE_SHIFT));
+ }
/* Invalidate DART to get rid of possible stale TLBs */
dart_tlb_invalidate_all();
- printk(KERN_INFO "U3/CPC925 DART IOMMU initialized\n");
+ printk(KERN_INFO "DART IOMMU initialized for %s type chipset\n",
+ dart_is_u4 ? "U4" : "U3");
return 0;
}
-static void iommu_table_u3_setup(void)
+static void iommu_table_dart_setup(void)
{
- iommu_table_u3.it_busno = 0;
- iommu_table_u3.it_offset = 0;
+ iommu_table_dart.it_busno = 0;
+ iommu_table_dart.it_offset = 0;
/* it_size is in number of entries */
- iommu_table_u3.it_size = (dart_tablesize / sizeof(u32)) >> DART_PAGE_FACTOR;
+ iommu_table_dart.it_size = (dart_tablesize / sizeof(u32)) >> DART_PAGE_FACTOR;
/* Initialize the common IOMMU code */
- iommu_table_u3.it_base = (unsigned long)dart_vbase;
- iommu_table_u3.it_index = 0;
- iommu_table_u3.it_blocksize = 1;
- iommu_init_table(&iommu_table_u3);
+ iommu_table_dart.it_base = (unsigned long)dart_vbase;
+ iommu_table_dart.it_index = 0;
+ iommu_table_dart.it_blocksize = 1;
+ iommu_init_table(&iommu_table_dart);
/* Reserve the last page of the DART to avoid possible prefetch
* past the DART mapped area
*/
- set_bit(iommu_table_u3.it_size - 1, iommu_table_u3.it_map);
+ set_bit(iommu_table_dart.it_size - 1, iommu_table_dart.it_map);
}
-static void iommu_dev_setup_u3(struct pci_dev *dev)
+static void iommu_dev_setup_dart(struct pci_dev *dev)
{
struct device_node *dn;
@@ -254,35 +270,39 @@ static void iommu_dev_setup_u3(struct pci_dev *dev)
dn = pci_device_to_OF_node(dev);
if (dn)
- PCI_DN(dn)->iommu_table = &iommu_table_u3;
+ PCI_DN(dn)->iommu_table = &iommu_table_dart;
}
-static void iommu_bus_setup_u3(struct pci_bus *bus)
+static void iommu_bus_setup_dart(struct pci_bus *bus)
{
struct device_node *dn;
- if (!iommu_table_u3_inited) {
- iommu_table_u3_inited = 1;
- iommu_table_u3_setup();
+ if (!iommu_table_dart_inited) {
+ iommu_table_dart_inited = 1;
+ iommu_table_dart_setup();
}
dn = pci_bus_to_OF_node(bus);
if (dn)
- PCI_DN(dn)->iommu_table = &iommu_table_u3;
+ PCI_DN(dn)->iommu_table = &iommu_table_dart;
}
static void iommu_dev_setup_null(struct pci_dev *dev) { }
static void iommu_bus_setup_null(struct pci_bus *bus) { }
-void iommu_init_early_u3(void)
+void iommu_init_early_dart(void)
{
struct device_node *dn;
/* Find the DART in the device-tree */
dn = of_find_compatible_node(NULL, "dart", "u3-dart");
- if (dn == NULL)
- return;
+ if (dn == NULL) {
+ dn = of_find_compatible_node(NULL, "dart", "u4-dart");
+ if (dn == NULL)
+ goto bail;
+ dart_is_u4 = 1;
+ }
/* Setup low level TCE operations for the core IOMMU code */
ppc_md.tce_build = dart_build;
@@ -290,24 +310,27 @@ void iommu_init_early_u3(void)
ppc_md.tce_flush = dart_flush;
/* Initialize the DART HW */
- if (dart_init(dn)) {
- /* If init failed, use direct iommu and null setup functions */
- ppc_md.iommu_dev_setup = iommu_dev_setup_null;
- ppc_md.iommu_bus_setup = iommu_bus_setup_null;
-
- /* Setup pci_dma ops */
- pci_direct_iommu_init();
- } else {
- ppc_md.iommu_dev_setup = iommu_dev_setup_u3;
- ppc_md.iommu_bus_setup = iommu_bus_setup_u3;
+ if (dart_init(dn) == 0) {
+ ppc_md.iommu_dev_setup = iommu_dev_setup_dart;
+ ppc_md.iommu_bus_setup = iommu_bus_setup_dart;
/* Setup pci_dma ops */
pci_iommu_init();
+
+ return;
}
+
+ bail:
+ /* If init failed, use direct iommu and null setup functions */
+ ppc_md.iommu_dev_setup = iommu_dev_setup_null;
+ ppc_md.iommu_bus_setup = iommu_bus_setup_null;
+
+ /* Setup pci_dma ops */
+ pci_direct_iommu_init();
}
-void __init alloc_u3_dart_table(void)
+void __init alloc_dart_table(void)
{
/* Only reserve DART space if machine has more than 2GB of RAM
* or if requested with iommu=on on cmdline.
@@ -323,5 +346,5 @@ void __init alloc_u3_dart_table(void)
dart_tablebase = (unsigned long)
abs_to_virt(lmb_alloc_base(1UL<<24, 1UL<<24, 0x80000000L));
- printk(KERN_INFO "U3-DART allocated at: %lx\n", dart_tablebase);
+ printk(KERN_INFO "DART table allocated at: %lx\n", dart_tablebase);
}
diff --git a/arch/ppc/syslib/ipic.c b/arch/powerpc/sysdev/ipic.c
index 8f01e0f1d847..8f01e0f1d847 100644
--- a/arch/ppc/syslib/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
diff --git a/arch/ppc/syslib/ipic.h b/arch/powerpc/sysdev/ipic.h
index a7ce7da8785c..a7ce7da8785c 100644
--- a/arch/ppc/syslib/ipic.h
+++ b/arch/powerpc/sysdev/ipic.h
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 58d1cc2023c8..4f26304d0263 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -13,6 +13,9 @@
*/
#undef DEBUG
+#undef DEBUG_IPI
+#undef DEBUG_IRQ
+#undef DEBUG_LOW
#include <linux/config.h>
#include <linux/types.h>
@@ -45,7 +48,11 @@ static struct mpic *mpic_primary;
static DEFINE_SPINLOCK(mpic_lock);
#ifdef CONFIG_PPC32 /* XXX for now */
-#define distribute_irqs CONFIG_IRQ_ALL_CPUS
+#ifdef CONFIG_IRQ_ALL_CPUS
+#define distribute_irqs (1)
+#else
+#define distribute_irqs (0)
+#endif
#endif
/*
@@ -164,70 +171,129 @@ static void __init mpic_test_broken_ipi(struct mpic *mpic)
/* Test if an interrupt is sourced from HyperTransport (used on broken U3s)
* to force the edge setting on the MPIC and do the ack workaround.
*/
-static inline int mpic_is_ht_interrupt(struct mpic *mpic, unsigned int source_no)
+static inline int mpic_is_ht_interrupt(struct mpic *mpic, unsigned int source)
{
- if (source_no >= 128 || !mpic->fixups)
+ if (source >= 128 || !mpic->fixups)
return 0;
- return mpic->fixups[source_no].base != NULL;
+ return mpic->fixups[source].base != NULL;
}
-static inline void mpic_apic_end_irq(struct mpic *mpic, unsigned int source_no)
+
+static inline void mpic_ht_end_irq(struct mpic *mpic, unsigned int source)
{
- struct mpic_irq_fixup *fixup = &mpic->fixups[source_no];
- u32 tmp;
+ struct mpic_irq_fixup *fixup = &mpic->fixups[source];
- spin_lock(&mpic->fixup_lock);
- writeb(0x11 + 2 * fixup->irq, fixup->base);
- tmp = readl(fixup->base + 2);
- writel(tmp | 0x80000000ul, fixup->base + 2);
- /* config writes shouldn't be posted but let's be safe ... */
- (void)readl(fixup->base + 2);
- spin_unlock(&mpic->fixup_lock);
+ if (fixup->applebase) {
+ unsigned int soff = (fixup->index >> 3) & ~3;
+ unsigned int mask = 1U << (fixup->index & 0x1f);
+ writel(mask, fixup->applebase + soff);
+ } else {
+ spin_lock(&mpic->fixup_lock);
+ writeb(0x11 + 2 * fixup->index, fixup->base + 2);
+ writel(fixup->data, fixup->base + 4);
+ spin_unlock(&mpic->fixup_lock);
+ }
}
+static void mpic_startup_ht_interrupt(struct mpic *mpic, unsigned int source,
+ unsigned int irqflags)
+{
+ struct mpic_irq_fixup *fixup = &mpic->fixups[source];
+ unsigned long flags;
+ u32 tmp;
-static void __init mpic_amd8111_read_irq(struct mpic *mpic, u8 __iomem *devbase)
+ if (fixup->base == NULL)
+ return;
+
+ DBG("startup_ht_interrupt(%u, %u) index: %d\n",
+ source, irqflags, fixup->index);
+ spin_lock_irqsave(&mpic->fixup_lock, flags);
+ /* Enable and configure */
+ writeb(0x10 + 2 * fixup->index, fixup->base + 2);
+ tmp = readl(fixup->base + 4);
+ tmp &= ~(0x23U);
+ if (irqflags & IRQ_LEVEL)
+ tmp |= 0x22;
+ writel(tmp, fixup->base + 4);
+ spin_unlock_irqrestore(&mpic->fixup_lock, flags);
+}
+
+static void mpic_shutdown_ht_interrupt(struct mpic *mpic, unsigned int source,
+ unsigned int irqflags)
{
- int i, irq;
+ struct mpic_irq_fixup *fixup = &mpic->fixups[source];
+ unsigned long flags;
u32 tmp;
- printk(KERN_INFO "mpic: - Workarounds on AMD 8111 @ %p\n", devbase);
+ if (fixup->base == NULL)
+ return;
- for (i=0; i < 24; i++) {
- writeb(0x10 + 2*i, devbase + 0xf2);
- tmp = readl(devbase + 0xf4);
- if ((tmp & 0x1) || !(tmp & 0x20))
- continue;
- irq = (tmp >> 16) & 0xff;
- mpic->fixups[irq].irq = i;
- mpic->fixups[irq].base = devbase + 0xf2;
- }
+ DBG("shutdown_ht_interrupt(%u, %u)\n", source, irqflags);
+
+ /* Disable */
+ spin_lock_irqsave(&mpic->fixup_lock, flags);
+ writeb(0x10 + 2 * fixup->index, fixup->base + 2);
+ tmp = readl(fixup->base + 4);
+ tmp &= ~1U;
+ writel(tmp, fixup->base + 4);
+ spin_unlock_irqrestore(&mpic->fixup_lock, flags);
}
-
-static void __init mpic_amd8131_read_irq(struct mpic *mpic, u8 __iomem *devbase)
+
+static void __init mpic_scan_ht_pic(struct mpic *mpic, u8 __iomem *devbase,
+ unsigned int devfn, u32 vdid)
{
- int i, irq;
+ int i, irq, n;
+ u8 __iomem *base;
u32 tmp;
+ u8 pos;
+
+ for (pos = readb(devbase + PCI_CAPABILITY_LIST); pos != 0;
+ pos = readb(devbase + pos + PCI_CAP_LIST_NEXT)) {
+ u8 id = readb(devbase + pos + PCI_CAP_LIST_ID);
+ if (id == PCI_CAP_ID_HT_IRQCONF) {
+ id = readb(devbase + pos + 3);
+ if (id == 0x80)
+ break;
+ }
+ }
+ if (pos == 0)
+ return;
- printk(KERN_INFO "mpic: - Workarounds on AMD 8131 @ %p\n", devbase);
+ base = devbase + pos;
+ writeb(0x01, base + 2);
+ n = (readl(base + 4) >> 16) & 0xff;
- for (i=0; i < 4; i++) {
- writeb(0x10 + 2*i, devbase + 0xba);
- tmp = readl(devbase + 0xbc);
- if ((tmp & 0x1) || !(tmp & 0x20))
- continue;
+ printk(KERN_INFO "mpic: - HT:%02x.%x [0x%02x] vendor %04x device %04x"
+ " has %d irqs\n",
+ devfn >> 3, devfn & 0x7, pos, vdid & 0xffff, vdid >> 16, n + 1);
+
+ for (i = 0; i <= n; i++) {
+ writeb(0x10 + 2 * i, base + 2);
+ tmp = readl(base + 4);
irq = (tmp >> 16) & 0xff;
- mpic->fixups[irq].irq = i;
- mpic->fixups[irq].base = devbase + 0xba;
+ DBG("HT PIC index 0x%x, irq 0x%x, tmp: %08x\n", i, irq, tmp);
+ /* mask it , will be unmasked later */
+ tmp |= 0x1;
+ writel(tmp, base + 4);
+ mpic->fixups[irq].index = i;
+ mpic->fixups[irq].base = base;
+ /* Apple HT PIC has a non-standard way of doing EOIs */
+ if ((vdid & 0xffff) == 0x106b)
+ mpic->fixups[irq].applebase = devbase + 0x60;
+ else
+ mpic->fixups[irq].applebase = NULL;
+ writeb(0x11 + 2 * i, base + 2);
+ mpic->fixups[irq].data = readl(base + 4) | 0x80000000;
}
}
-static void __init mpic_scan_ioapics(struct mpic *mpic)
+
+static void __init mpic_scan_ht_pics(struct mpic *mpic)
{
unsigned int devfn;
u8 __iomem *cfgspace;
- printk(KERN_INFO "mpic: Setting up IO-APICs workarounds for U3\n");
+ printk(KERN_INFO "mpic: Setting up HT PICs workarounds for U3/U4\n");
/* Allocate fixups array */
mpic->fixups = alloc_bootmem(128 * sizeof(struct mpic_irq_fixup));
@@ -237,21 +303,20 @@ static void __init mpic_scan_ioapics(struct mpic *mpic)
/* Init spinlock */
spin_lock_init(&mpic->fixup_lock);
- /* Map u3 config space. We assume all IO-APICs are on the primary bus
- * and slot will never be above "0xf" so we only need to map 32k
+ /* Map U3 config space. We assume all IO-APICs are on the primary bus
+ * so we only need to map 64kB.
*/
- cfgspace = (unsigned char __iomem *)ioremap(0xf2000000, 0x8000);
+ cfgspace = ioremap(0xf2000000, 0x10000);
BUG_ON(cfgspace == NULL);
- /* Now we scan all slots. We do a very quick scan, we read the header type,
- * vendor ID and device ID only, that's plenty enough
+ /* Now we scan all slots. We do a very quick scan, we read the header
+ * type, vendor ID and device ID only, that's plenty enough
*/
- for (devfn = 0; devfn < PCI_DEVFN(0x10,0); devfn ++) {
+ for (devfn = 0; devfn < 0x100; devfn++) {
u8 __iomem *devbase = cfgspace + (devfn << 8);
u8 hdr_type = readb(devbase + PCI_HEADER_TYPE);
u32 l = readl(devbase + PCI_VENDOR_ID);
- u16 vendor_id, device_id;
- int multifunc = 0;
+ u16 s;
DBG("devfn %x, l: %x\n", devfn, l);
@@ -259,22 +324,16 @@ static void __init mpic_scan_ioapics(struct mpic *mpic)
if (l == 0xffffffff || l == 0x00000000 ||
l == 0x0000ffff || l == 0xffff0000)
goto next;
+ /* Check if is supports capability lists */
+ s = readw(devbase + PCI_STATUS);
+ if (!(s & PCI_STATUS_CAP_LIST))
+ goto next;
+
+ mpic_scan_ht_pic(mpic, devbase, devfn, l);
- /* Check if it's a multifunction device (only really used
- * to function 0 though
- */
- multifunc = !!(hdr_type & 0x80);
- vendor_id = l & 0xffff;
- device_id = (l >> 16) & 0xffff;
-
- /* If a known device, go to fixup setup code */
- if (vendor_id == PCI_VENDOR_ID_AMD && device_id == 0x7460)
- mpic_amd8111_read_irq(mpic, devbase);
- if (vendor_id == PCI_VENDOR_ID_AMD && device_id == 0x7450)
- mpic_amd8131_read_irq(mpic, devbase);
next:
/* next device, if function 0 */
- if ((PCI_FUNC(devfn) == 0) && !multifunc)
+ if (PCI_FUNC(devfn) == 0 && (hdr_type & 0x80) == 0)
devfn += 7;
}
}
@@ -371,6 +430,31 @@ static void mpic_enable_irq(unsigned int irq)
break;
}
} while(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK);
+
+#ifdef CONFIG_MPIC_BROKEN_U3
+ if (mpic->flags & MPIC_BROKEN_U3) {
+ unsigned int src = irq - mpic->irq_offset;
+ if (mpic_is_ht_interrupt(mpic, src) &&
+ (irq_desc[irq].status & IRQ_LEVEL))
+ mpic_ht_end_irq(mpic, src);
+ }
+#endif /* CONFIG_MPIC_BROKEN_U3 */
+}
+
+static unsigned int mpic_startup_irq(unsigned int irq)
+{
+#ifdef CONFIG_MPIC_BROKEN_U3
+ struct mpic *mpic = mpic_from_irq(irq);
+ unsigned int src = irq - mpic->irq_offset;
+
+ if (mpic_is_ht_interrupt(mpic, src))
+ mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status);
+
+#endif /* CONFIG_MPIC_BROKEN_U3 */
+
+ mpic_enable_irq(irq);
+
+ return 0;
}
static void mpic_disable_irq(unsigned int irq)
@@ -394,12 +478,27 @@ static void mpic_disable_irq(unsigned int irq)
} while(!(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK));
}
+static void mpic_shutdown_irq(unsigned int irq)
+{
+#ifdef CONFIG_MPIC_BROKEN_U3
+ struct mpic *mpic = mpic_from_irq(irq);
+ unsigned int src = irq - mpic->irq_offset;
+
+ if (mpic_is_ht_interrupt(mpic, src))
+ mpic_shutdown_ht_interrupt(mpic, src, irq_desc[irq].status);
+
+#endif /* CONFIG_MPIC_BROKEN_U3 */
+
+ mpic_disable_irq(irq);
+}
+
static void mpic_end_irq(unsigned int irq)
{
struct mpic *mpic = mpic_from_irq(irq);
+#ifdef DEBUG_IRQ
DBG("%s: end_irq: %d\n", mpic->name, irq);
-
+#endif
/* We always EOI on end_irq() even for edge interrupts since that
* should only lower the priority, the MPIC should have properly
* latched another edge interrupt coming in anyway
@@ -408,8 +507,9 @@ static void mpic_end_irq(unsigned int irq)
#ifdef CONFIG_MPIC_BROKEN_U3
if (mpic->flags & MPIC_BROKEN_U3) {
unsigned int src = irq - mpic->irq_offset;
- if (mpic_is_ht_interrupt(mpic, src))
- mpic_apic_end_irq(mpic, src);
+ if (mpic_is_ht_interrupt(mpic, src) &&
+ (irq_desc[irq].status & IRQ_LEVEL))
+ mpic_ht_end_irq(mpic, src);
}
#endif /* CONFIG_MPIC_BROKEN_U3 */
@@ -490,6 +590,8 @@ struct mpic * __init mpic_alloc(unsigned long phys_addr,
mpic->name = name;
mpic->hc_irq.typename = name;
+ mpic->hc_irq.startup = mpic_startup_irq;
+ mpic->hc_irq.shutdown = mpic_shutdown_irq;
mpic->hc_irq.enable = mpic_enable_irq;
mpic->hc_irq.disable = mpic_disable_irq;
mpic->hc_irq.end = mpic_end_irq;
@@ -658,10 +760,10 @@ void __init mpic_init(struct mpic *mpic)
mpic->irq_count = mpic->num_sources;
#ifdef CONFIG_MPIC_BROKEN_U3
- /* Do the ioapic fixups on U3 broken mpic */
+ /* Do the HT PIC fixups on U3 broken mpic */
DBG("MPIC flags: %x\n", mpic->flags);
if ((mpic->flags & MPIC_BROKEN_U3) && (mpic->flags & MPIC_PRIMARY))
- mpic_scan_ioapics(mpic);
+ mpic_scan_ht_pics(mpic);
#endif /* CONFIG_MPIC_BROKEN_U3 */
for (i = 0; i < mpic->num_sources; i++) {
@@ -848,7 +950,9 @@ void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask)
BUG_ON(mpic == NULL);
+#ifdef DEBUG_IPI
DBG("%s: send_ipi(ipi_no: %d)\n", mpic->name, ipi_no);
+#endif
mpic_cpu_write(MPIC_CPU_IPI_DISPATCH_0 + ipi_no * 0x10,
mpic_physmask(cpu_mask & cpus_addr(cpu_online_map)[0]));
@@ -859,19 +963,28 @@ int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs)
u32 irq;
irq = mpic_cpu_read(MPIC_CPU_INTACK) & MPIC_VECPRI_VECTOR_MASK;
+#ifdef DEBUG_LOW
DBG("%s: get_one_irq(): %d\n", mpic->name, irq);
-
+#endif
if (mpic->cascade && irq == mpic->cascade_vec) {
+#ifdef DEBUG_LOW
DBG("%s: cascading ...\n", mpic->name);
+#endif
irq = mpic->cascade(regs, mpic->cascade_data);
mpic_eoi(mpic);
return irq;
}
if (unlikely(irq == MPIC_VEC_SPURRIOUS))
return -1;
- if (irq < MPIC_VEC_IPI_0)
+ if (irq < MPIC_VEC_IPI_0) {
+#ifdef DEBUG_IRQ
+ DBG("%s: irq %d\n", mpic->name, irq + mpic->irq_offset);
+#endif
return irq + mpic->irq_offset;
+ }
+#ifdef DEBUG_IPI
DBG("%s: ipi %d !\n", mpic->name, irq - MPIC_VEC_IPI_0);
+#endif
return irq - MPIC_VEC_IPI_0 + mpic->ipi_offset;
}
diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile
index b20312e5ed27..109d874ecfbe 100644
--- a/arch/powerpc/xmon/Makefile
+++ b/arch/powerpc/xmon/Makefile
@@ -3,9 +3,5 @@
ifdef CONFIG_PPC64
EXTRA_CFLAGS += -mno-minimal-toc
endif
-
-obj-$(CONFIG_8xx) += start_8xx.o
-obj-$(CONFIG_6xx) += start_32.o
-obj-$(CONFIG_4xx) += start_32.o
-obj-$(CONFIG_PPC64) += start_64.o
-obj-y += xmon.o ppc-dis.o ppc-opc.o setjmp.o nonstdio.o
+obj-y += xmon.o ppc-dis.o ppc-opc.o setjmp.o start.o \
+ nonstdio.o
diff --git a/arch/powerpc/xmon/start_64.c b/arch/powerpc/xmon/start.c
index 712552c4f242..712552c4f242 100644
--- a/arch/powerpc/xmon/start_64.c
+++ b/arch/powerpc/xmon/start.c
diff --git a/arch/powerpc/xmon/start_32.c b/arch/powerpc/xmon/start_32.c
deleted file mode 100644
index c2464df4217e..000000000000
--- a/arch/powerpc/xmon/start_32.c
+++ /dev/null
@@ -1,441 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- */
-#include <linux/config.h>
-#include <linux/string.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <linux/adb.h>
-#include <linux/pmu.h>
-#include <linux/cuda.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/bitops.h>
-#include <asm/xmon.h>
-#include <asm/prom.h>
-#include <asm/bootx.h>
-#include <asm/machdep.h>
-#include <asm/errno.h>
-#include <asm/pmac_feature.h>
-#include <asm/processor.h>
-#include <asm/delay.h>
-#include <asm/btext.h>
-#include <asm/time.h>
-#include "nonstdio.h"
-
-static volatile unsigned char __iomem *sccc, *sccd;
-unsigned int TXRDY, RXRDY, DLAB;
-
-static int use_serial;
-static int use_screen;
-static int via_modem;
-static int xmon_use_sccb;
-static struct device_node *channel_node;
-
-void buf_access(void)
-{
- if (DLAB)
- sccd[3] &= ~DLAB; /* reset DLAB */
-}
-
-extern int adb_init(void);
-
-#ifdef CONFIG_PPC_CHRP
-/*
- * This looks in the "ranges" property for the primary PCI host bridge
- * to find the physical address of the start of PCI/ISA I/O space.
- * It is basically a cut-down version of pci_process_bridge_OF_ranges.
- */
-static unsigned long chrp_find_phys_io_base(void)
-{
- struct device_node *node;
- unsigned int *ranges;
- unsigned long base = CHRP_ISA_IO_BASE;
- int rlen = 0;
- int np;
-
- node = find_devices("isa");
- if (node != NULL) {
- node = node->parent;
- if (node == NULL || node->type == NULL
- || strcmp(node->type, "pci") != 0)
- node = NULL;
- }
- if (node == NULL)
- node = find_devices("pci");
- if (node == NULL)
- return base;
-
- ranges = (unsigned int *) get_property(node, "ranges", &rlen);
- np = prom_n_addr_cells(node) + 5;
- while ((rlen -= np * sizeof(unsigned int)) >= 0) {
- if ((ranges[0] >> 24) == 1 && ranges[2] == 0) {
- /* I/O space starting at 0, grab the phys base */
- base = ranges[np - 3];
- break;
- }
- ranges += np;
- }
- return base;
-}
-#endif /* CONFIG_PPC_CHRP */
-
-void xmon_map_scc(void)
-{
-#ifdef CONFIG_PPC_MULTIPLATFORM
- volatile unsigned char __iomem *base;
-
- if (_machine == _MACH_Pmac) {
- struct device_node *np;
- unsigned long addr;
-#ifdef CONFIG_BOOTX_TEXT
- if (!use_screen && !use_serial
- && !machine_is_compatible("iMac")) {
- /* see if there is a keyboard in the device tree
- with a parent of type "adb" */
- for (np = find_devices("keyboard"); np; np = np->next)
- if (np->parent && np->parent->type
- && strcmp(np->parent->type, "adb") == 0)
- break;
-
- /* needs to be hacked if xmon_printk is to be used
- from within find_via_pmu() */
-#ifdef CONFIG_ADB_PMU
- if (np != NULL && boot_text_mapped && find_via_pmu())
- use_screen = 1;
-#endif
-#ifdef CONFIG_ADB_CUDA
- if (np != NULL && boot_text_mapped && find_via_cuda())
- use_screen = 1;
-#endif
- }
- if (!use_screen && (np = find_devices("escc")) != NULL) {
- /*
- * look for the device node for the serial port
- * we're using and see if it says it has a modem
- */
- char *name = xmon_use_sccb? "ch-b": "ch-a";
- char *slots;
- int l;
-
- np = np->child;
- while (np != NULL && strcmp(np->name, name) != 0)
- np = np->sibling;
- if (np != NULL) {
- /* XXX should parse this properly */
- channel_node = np;
- slots = get_property(np, "slot-names", &l);
- if (slots != NULL && l >= 10
- && strcmp(slots+4, "Modem") == 0)
- via_modem = 1;
- }
- }
- btext_drawstring("xmon uses ");
- if (use_screen)
- btext_drawstring("screen and keyboard\n");
- else {
- if (via_modem)
- btext_drawstring("modem on ");
- btext_drawstring(xmon_use_sccb? "printer": "modem");
- btext_drawstring(" port\n");
- }
-
-#endif /* CONFIG_BOOTX_TEXT */
-
-#ifdef CHRP_ESCC
- addr = 0xc1013020;
-#else
- addr = 0xf3013020;
-#endif
- TXRDY = 4;
- RXRDY = 1;
-
- np = find_devices("mac-io");
- if (np && np->n_addrs)
- addr = np->addrs[0].address + 0x13020;
- base = (volatile unsigned char *) ioremap(addr & PAGE_MASK, PAGE_SIZE);
- sccc = base + (addr & ~PAGE_MASK);
- sccd = sccc + 0x10;
-
- } else {
- base = (volatile unsigned char *) isa_io_base;
-
-#ifdef CONFIG_PPC_CHRP
- if (_machine == _MACH_chrp)
- base = (volatile unsigned char __iomem *)
- ioremap(chrp_find_phys_io_base(), 0x1000);
-#endif
-
- sccc = base + 0x3fd;
- sccd = base + 0x3f8;
- if (xmon_use_sccb) {
- sccc -= 0x100;
- sccd -= 0x100;
- }
- TXRDY = 0x20;
- RXRDY = 1;
- DLAB = 0x80;
- }
-#elif defined(CONFIG_GEMINI)
- /* should already be mapped by the kernel boot */
- sccc = (volatile unsigned char __iomem *) 0xffeffb0d;
- sccd = (volatile unsigned char __iomem *) 0xffeffb08;
- TXRDY = 0x20;
- RXRDY = 1;
- DLAB = 0x80;
-#elif defined(CONFIG_405GP)
- sccc = (volatile unsigned char __iomem *)0xef600305;
- sccd = (volatile unsigned char __iomem *)0xef600300;
- TXRDY = 0x20;
- RXRDY = 1;
- DLAB = 0x80;
-#endif /* platform */
-}
-
-static int scc_initialized = 0;
-
-void xmon_init_scc(void);
-extern void cuda_poll(void);
-
-static inline void do_poll_adb(void)
-{
-#ifdef CONFIG_ADB_PMU
- if (sys_ctrler == SYS_CTRLER_PMU)
- pmu_poll_adb();
-#endif /* CONFIG_ADB_PMU */
-#ifdef CONFIG_ADB_CUDA
- if (sys_ctrler == SYS_CTRLER_CUDA)
- cuda_poll();
-#endif /* CONFIG_ADB_CUDA */
-}
-
-int xmon_write(void *ptr, int nb)
-{
- char *p = ptr;
- int i, c, ct;
-
-#ifdef CONFIG_SMP
- static unsigned long xmon_write_lock;
- int lock_wait = 1000000;
- int locked;
-
- while ((locked = test_and_set_bit(0, &xmon_write_lock)) != 0)
- if (--lock_wait == 0)
- break;
-#endif
-
-#ifdef CONFIG_BOOTX_TEXT
- if (use_screen) {
- /* write it on the screen */
- for (i = 0; i < nb; ++i)
- btext_drawchar(*p++);
- goto out;
- }
-#endif
- if (!scc_initialized)
- xmon_init_scc();
- ct = 0;
- for (i = 0; i < nb; ++i) {
- while ((*sccc & TXRDY) == 0)
- do_poll_adb();
- c = p[i];
- if (c == '\n' && !ct) {
- c = '\r';
- ct = 1;
- --i;
- } else {
- ct = 0;
- }
- buf_access();
- *sccd = c;
- eieio();
- }
-
- out:
-#ifdef CONFIG_SMP
- if (!locked)
- clear_bit(0, &xmon_write_lock);
-#endif
- return nb;
-}
-
-int xmon_wants_key;
-int xmon_adb_keycode;
-
-#ifdef CONFIG_BOOTX_TEXT
-static int xmon_adb_shiftstate;
-
-static unsigned char xmon_keytab[128] =
- "asdfhgzxcv\000bqwer" /* 0x00 - 0x0f */
- "yt123465=97-80]o" /* 0x10 - 0x1f */
- "u[ip\rlj'k;\\,/nm." /* 0x20 - 0x2f */
- "\t `\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */
- "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */
- "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */
-
-static unsigned char xmon_shift_keytab[128] =
- "ASDFHGZXCV\000BQWER" /* 0x00 - 0x0f */
- "YT!@#$^%+(&_*)}O" /* 0x10 - 0x1f */
- "U{IP\rLJ\"K:|<?NM>" /* 0x20 - 0x2f */
- "\t ~\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */
- "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */
- "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */
-
-static int xmon_get_adb_key(void)
-{
- int k, t, on;
-
- xmon_wants_key = 1;
- for (;;) {
- xmon_adb_keycode = -1;
- t = 0;
- on = 0;
- do {
- if (--t < 0) {
- on = 1 - on;
- btext_drawchar(on? 0xdb: 0x20);
- btext_drawchar('\b');
- t = 200000;
- }
- do_poll_adb();
- } while (xmon_adb_keycode == -1);
- k = xmon_adb_keycode;
- if (on)
- btext_drawstring(" \b");
-
- /* test for shift keys */
- if ((k & 0x7f) == 0x38 || (k & 0x7f) == 0x7b) {
- xmon_adb_shiftstate = (k & 0x80) == 0;
- continue;
- }
- if (k >= 0x80)
- continue; /* ignore up transitions */
- k = (xmon_adb_shiftstate? xmon_shift_keytab: xmon_keytab)[k];
- if (k != 0)
- break;
- }
- xmon_wants_key = 0;
- return k;
-}
-#endif /* CONFIG_BOOTX_TEXT */
-
-int xmon_readchar(void)
-{
-#ifdef CONFIG_BOOTX_TEXT
- if (use_screen)
- return xmon_get_adb_key();
-#endif
- if (!scc_initialized)
- xmon_init_scc();
- while ((*sccc & RXRDY) == 0)
- do_poll_adb();
- buf_access();
- return *sccd;
-}
-
-int xmon_read_poll(void)
-{
- if ((*sccc & RXRDY) == 0) {
- do_poll_adb();
- return -1;
- }
- buf_access();
- return *sccd;
-}
-
-static unsigned char scc_inittab[] = {
- 13, 0, /* set baud rate divisor */
- 12, 1,
- 14, 1, /* baud rate gen enable, src=rtxc */
- 11, 0x50, /* clocks = br gen */
- 5, 0xea, /* tx 8 bits, assert DTR & RTS */
- 4, 0x46, /* x16 clock, 1 stop */
- 3, 0xc1, /* rx enable, 8 bits */
-};
-
-void xmon_init_scc(void)
-{
- if ( _machine == _MACH_chrp )
- {
- sccd[3] = 0x83; eieio(); /* LCR = 8N1 + DLAB */
- sccd[0] = 12; eieio(); /* DLL = 9600 baud */
- sccd[1] = 0; eieio();
- sccd[2] = 0; eieio(); /* FCR = 0 */
- sccd[3] = 3; eieio(); /* LCR = 8N1 */
- sccd[1] = 0; eieio(); /* IER = 0 */
- }
- else if ( _machine == _MACH_Pmac )
- {
- int i, x;
- unsigned long timeout;
-
- if (channel_node != 0)
- pmac_call_feature(
- PMAC_FTR_SCC_ENABLE,
- channel_node,
- PMAC_SCC_ASYNC | PMAC_SCC_FLAG_XMON, 1);
- printk(KERN_INFO "Serial port locked ON by debugger !\n");
- if (via_modem && channel_node != 0) {
- unsigned int t0;
-
- pmac_call_feature(
- PMAC_FTR_MODEM_ENABLE,
- channel_node, 0, 1);
- printk(KERN_INFO "Modem powered up by debugger !\n");
- t0 = get_tbl();
- timeout = 3 * tb_ticks_per_sec;
- if (timeout == 0)
- /* assume 25MHz if tb_ticks_per_sec not set */
- timeout = 75000000;
- while (get_tbl() - t0 < timeout)
- eieio();
- }
- /* use the B channel if requested */
- if (xmon_use_sccb) {
- sccc = (volatile unsigned char *)
- ((unsigned long)sccc & ~0x20);
- sccd = sccc + 0x10;
- }
- for (i = 20000; i != 0; --i) {
- x = *sccc; eieio();
- }
- *sccc = 9; eieio(); /* reset A or B side */
- *sccc = ((unsigned long)sccc & 0x20)? 0x80: 0x40; eieio();
- for (i = 0; i < sizeof(scc_inittab); ++i) {
- *sccc = scc_inittab[i];
- eieio();
- }
- }
- scc_initialized = 1;
- if (via_modem) {
- for (;;) {
- xmon_write("ATE1V1\r", 7);
- if (xmon_expect("OK", 5)) {
- xmon_write("ATA\r", 4);
- if (xmon_expect("CONNECT", 40))
- break;
- }
- xmon_write("+++", 3);
- xmon_expect("OK", 3);
- }
- }
-}
-
-void xmon_enter(void)
-{
-#ifdef CONFIG_ADB_PMU
- if (_machine == _MACH_Pmac) {
- pmu_suspend();
- }
-#endif
-}
-
-void xmon_leave(void)
-{
-#ifdef CONFIG_ADB_PMU
- if (_machine == _MACH_Pmac) {
- pmu_resume();
- }
-#endif
-}
diff --git a/arch/powerpc/xmon/start_8xx.c b/arch/powerpc/xmon/start_8xx.c
deleted file mode 100644
index 4c17b0486ad5..000000000000
--- a/arch/powerpc/xmon/start_8xx.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- * Copyright (C) 2000 Dan Malek.
- * Quick hack of Paul's code to make XMON work on 8xx processors. Lots
- * of assumptions, like the SMC1 is used, it has been initialized by the
- * loader at some point, and we can just stuff and suck bytes.
- * We rely upon the 8xx uart driver to support us, as the interface
- * changes between boot up and operational phases of the kernel.
- */
-#include <linux/string.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <linux/kernel.h>
-#include <asm/8xx_immap.h>
-#include <asm/mpc8xx.h>
-#include <asm/commproc.h>
-#include "nonstdio.h"
-
-extern int xmon_8xx_write(char *str, int nb);
-extern int xmon_8xx_read_poll(void);
-extern int xmon_8xx_read_char(void);
-
-void xmon_map_scc(void)
-{
- cpmp = (cpm8xx_t *)&(((immap_t *)IMAP_ADDR)->im_cpm);
-}
-
-void xmon_init_scc(void);
-
-int xmon_write(void *ptr, int nb)
-{
- return(xmon_8xx_write(ptr, nb));
-}
-
-int xmon_readchar(void)
-{
- return xmon_8xx_read_char();
-}
-
-int xmon_read_poll(void)
-{
- return(xmon_8xx_read_poll());
-}
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index c45a6ad5f3b7..22612ed5379c 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -450,7 +450,6 @@ int xmon_core(struct pt_regs *regs, int fromipi)
leave:
cpu_clear(cpu, cpus_in_xmon);
xmon_fault_jmp[cpu] = NULL;
-
#else
/* UP is simple... */
if (in_xmon) {
@@ -805,7 +804,10 @@ cmds(struct pt_regs *excp)
break;
case 'x':
case 'X':
+ return cmd;
case EOF:
+ printf(" <no input ...>\n");
+ mdelay(2000);
return cmd;
case '?':
printf(help_string);
@@ -1011,7 +1013,7 @@ static long check_bp_loc(unsigned long addr)
unsigned int instr;
addr &= ~3;
- if (addr < KERNELBASE) {
+ if (!is_kernel_addr(addr)) {
printf("Breakpoints may only be placed at kernel addresses\n");
return 0;
}
@@ -1062,7 +1064,7 @@ bpt_cmds(void)
dabr.address = 0;
dabr.enabled = 0;
if (scanhex(&dabr.address)) {
- if (dabr.address < KERNELBASE) {
+ if (!is_kernel_addr(dabr.address)) {
printf(badaddr);
break;
}
diff --git a/arch/ppc/boot/common/util.S b/arch/ppc/boot/common/util.S
index c96c9f80521e..368ec035e6cd 100644
--- a/arch/ppc/boot/common/util.S
+++ b/arch/ppc/boot/common/util.S
@@ -234,7 +234,8 @@ udelay:
* First, flush the data cache in case it was enabled and may be
* holding instructions for copy back.
*/
-_GLOBAL(flush_instruction_cache)
+ .globl flush_instruction_cache
+flush_instruction_cache:
mflr r6
bl flush_data_cache
@@ -279,7 +280,8 @@ _GLOBAL(flush_instruction_cache)
* Flush data cache
* Do this by just reading lots of stuff into the cache.
*/
-_GLOBAL(flush_data_cache)
+ .globl flush_data_cache
+flush_data_cache:
lis r3,cache_flush_buffer@h
ori r3,r3,cache_flush_buffer@l
li r4,NUM_CACHE_LINES
diff --git a/arch/ppc/boot/images/Makefile b/arch/ppc/boot/images/Makefile
index 532e7ef1edb6..58415d5718e3 100644
--- a/arch/ppc/boot/images/Makefile
+++ b/arch/ppc/boot/images/Makefile
@@ -26,7 +26,7 @@ quiet_cmd_uimage = UIMAGE $@
targets += uImage
$(obj)/uImage: $(obj)/vmlinux.gz
$(Q)rm -f $@
- $(call if_changed,uimage)
+ $(call cmd,uimage)
@echo -n ' Image: $@ '
@if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi
diff --git a/arch/ppc/configs/TQM8540_defconfig b/arch/ppc/configs/TQM8540_defconfig
new file mode 100644
index 000000000000..99bf3b7a2762
--- /dev/null
+++ b/arch/ppc/configs/TQM8540_defconfig
@@ -0,0 +1,973 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.15-rc2
+# Fri Nov 25 17:26:50 2005
+#
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Processor
+#
+# CONFIG_6xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_POWER3 is not set
+# CONFIG_POWER4 is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_E500=y
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+CONFIG_MATH_EMULATION=y
+# CONFIG_KEXEC is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_PPC_GEN550=y
+CONFIG_85xx=y
+CONFIG_PPC_INDIRECT_PCI_BE=y
+
+#
+# Freescale 85xx options
+#
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8548_CDS is not set
+# CONFIG_MPC8555_CDS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_STX_GP3 is not set
+CONFIG_TQM8540=y
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+CONFIG_MPC8540=y
+
+#
+# Platform options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_PPC_I8259=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_LEGACY_PROC is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+# CONFIG_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_TQM85xx=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_SENSORS_DS1337=y
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+CONFIG_SENSORS_LM75=y
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+CONFIG_HWMON_DEBUG_CHIP=y
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ppc/configs/TQM8541_defconfig b/arch/ppc/configs/TQM8541_defconfig
new file mode 100644
index 000000000000..0ff56695d349
--- /dev/null
+++ b/arch/ppc/configs/TQM8541_defconfig
@@ -0,0 +1,986 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.15-rc2
+# Wed Nov 30 13:36:28 2005
+#
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Processor
+#
+# CONFIG_6xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_POWER3 is not set
+# CONFIG_POWER4 is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_E500=y
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+CONFIG_MATH_EMULATION=y
+# CONFIG_KEXEC is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_PPC_GEN550=y
+CONFIG_85xx=y
+CONFIG_PPC_INDIRECT_PCI_BE=y
+
+#
+# Freescale 85xx options
+#
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8548_CDS is not set
+# CONFIG_MPC8555_CDS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+CONFIG_TQM8541=y
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+CONFIG_MPC8555=y
+
+#
+# Platform options
+#
+CONFIG_CPM2=y
+# CONFIG_PC_KEYBOARD is not set
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_PPC_I8259=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_LEGACY_PROC is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_TQM85xx=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_FS_ENET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_CPM is not set
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_MPC8260 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_SENSORS_DS1337=y
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_MAX6900 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8563 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+CONFIG_SENSORS_LM75=y
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+CONFIG_HWMON_DEBUG_CHIP=y
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+# CONFIG_SCC_ENET is not set
+# CONFIG_FEC_ENET is not set
+
+#
+# CPM2 Options
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ppc/configs/TQM8555_defconfig b/arch/ppc/configs/TQM8555_defconfig
new file mode 100644
index 000000000000..730b3db2e47a
--- /dev/null
+++ b/arch/ppc/configs/TQM8555_defconfig
@@ -0,0 +1,983 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 17:10:52 2005
+#
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Processor
+#
+# CONFIG_6xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_POWER3 is not set
+# CONFIG_POWER4 is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_E500=y
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+CONFIG_MATH_EMULATION=y
+# CONFIG_KEXEC is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_PPC_GEN550=y
+CONFIG_85xx=y
+CONFIG_PPC_INDIRECT_PCI_BE=y
+
+#
+# Freescale 85xx options
+#
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8548_CDS is not set
+# CONFIG_MPC8555_CDS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+CONFIG_TQM8555=y
+# CONFIG_TQM8560 is not set
+CONFIG_MPC8555=y
+
+#
+# Platform options
+#
+CONFIG_CPM2=y
+# CONFIG_PC_KEYBOARD is not set
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_PPC_I8259=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_LEGACY_PROC is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_TQM85xx=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_FS_ENET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_CPM is not set
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_SENSORS_DS1337=y
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+CONFIG_SENSORS_LM75=y
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+CONFIG_HWMON_DEBUG_CHIP=y
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+# CONFIG_SCC_ENET is not set
+# CONFIG_FEC_ENET is not set
+
+#
+# CPM2 Options
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ppc/configs/TQM8560_defconfig b/arch/ppc/configs/TQM8560_defconfig
new file mode 100644
index 000000000000..1d902072825e
--- /dev/null
+++ b/arch/ppc/configs/TQM8560_defconfig
@@ -0,0 +1,992 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.15-rc2
+# Wed Nov 30 16:47:53 2005
+#
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Processor
+#
+# CONFIG_6xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_POWER3 is not set
+# CONFIG_POWER4 is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_E500=y
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+CONFIG_MATH_EMULATION=y
+# CONFIG_KEXEC is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_85xx=y
+CONFIG_PPC_INDIRECT_PCI_BE=y
+
+#
+# Freescale 85xx options
+#
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8548_CDS is not set
+# CONFIG_MPC8555_CDS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+CONFIG_TQM8560=y
+CONFIG_MPC8560=y
+
+#
+# Platform options
+#
+CONFIG_CPM2=y
+# CONFIG_PC_KEYBOARD is not set
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_PPC_I8259=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_LEGACY_PROC is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+# CONFIG_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_TQM85xx=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_FS_ENET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+CONFIG_SERIAL_CPM_SCC1=y
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+# CONFIG_SERIAL_CPM_SMC1 is not set
+# CONFIG_SERIAL_CPM_SMC2 is not set
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_MPC8260 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_SENSORS_DS1337=y
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_MAX6900 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8563 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+CONFIG_SENSORS_LM75=y
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+CONFIG_HWMON_DEBUG_CHIP=y
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+# CONFIG_SCC_ENET is not set
+# CONFIG_FEC_ENET is not set
+
+#
+# CPM2 Options
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_KGDB_CONSOLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
index 0bb23fce4293..e6c1d615bb86 100644
--- a/arch/ppc/kernel/Makefile
+++ b/arch/ppc/kernel/Makefile
@@ -49,5 +49,4 @@ obj-$(CONFIG_TAU) += temp.o
ifndef CONFIG_E200
obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o
endif
-obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
endif
diff --git a/arch/ppc/kernel/asm-offsets.c b/arch/ppc/kernel/asm-offsets.c
index fe0e767fb94e..7964bf660e92 100644
--- a/arch/ppc/kernel/asm-offsets.c
+++ b/arch/ppc/kernel/asm-offsets.c
@@ -131,7 +131,7 @@ main(void)
DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features));
DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup));
- DEFINE(TI_SC_NOERR, offsetof(struct thread_info, syscall_noerror));
+ DEFINE(TI_SIGFRAME, offsetof(struct thread_info, nvgprs_frame));
DEFINE(TI_TASK, offsetof(struct thread_info, task));
DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S
index f044edbb454f..a48b950722a1 100644
--- a/arch/ppc/kernel/entry.S
+++ b/arch/ppc/kernel/entry.S
@@ -200,8 +200,6 @@ _GLOBAL(DoSyscall)
bl do_show_syscall
#endif /* SHOW_SYSCALLS */
rlwinm r10,r1,0,0,18 /* current_thread_info() */
- li r11,0
- stb r11,TI_SC_NOERR(r10)
lwz r11,TI_FLAGS(r10)
andi. r11,r11,_TIF_SYSCALL_T_OR_A
bne- syscall_dotrace
@@ -222,25 +220,21 @@ ret_from_syscall:
bl do_show_syscall_exit
#endif
mr r6,r3
- li r11,-_LAST_ERRNO
- cmplw 0,r3,r11
rlwinm r12,r1,0,0,18 /* current_thread_info() */
- blt+ 30f
- lbz r11,TI_SC_NOERR(r12)
- cmpwi r11,0
- bne 30f
- neg r3,r3
- lwz r10,_CCR(r1) /* Set SO bit in CR */
- oris r10,r10,0x1000
- stw r10,_CCR(r1)
-
/* disable interrupts so current_thread_info()->flags can't change */
-30: LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */
+ LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */
SYNC
MTMSRD(r10)
lwz r9,TI_FLAGS(r12)
- andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED)
+ li r8,-_LAST_ERRNO
+ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL)
bne- syscall_exit_work
+ cmplw 0,r3,r8
+ blt+ syscall_exit_cont
+ lwz r11,_CCR(r1) /* Load CR */
+ neg r3,r3
+ oris r11,r11,0x1000 /* Set SO bit in CR */
+ stw r11,_CCR(r1)
syscall_exit_cont:
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
/* If the process has its own DBCR0 value, load it up. The single
@@ -292,46 +286,113 @@ syscall_dotrace:
b syscall_dotrace_cont
syscall_exit_work:
- stw r6,RESULT(r1) /* Save result */
+ andi. r0,r9,_TIF_RESTOREALL
+ bne- 2f
+ cmplw 0,r3,r8
+ blt+ 1f
+ andi. r0,r9,_TIF_NOERROR
+ bne- 1f
+ lwz r11,_CCR(r1) /* Load CR */
+ neg r3,r3
+ oris r11,r11,0x1000 /* Set SO bit in CR */
+ stw r11,_CCR(r1)
+
+1: stw r6,RESULT(r1) /* Save result */
stw r3,GPR3(r1) /* Update return value */
- andi. r0,r9,_TIF_SYSCALL_T_OR_A
- beq 5f
- ori r10,r10,MSR_EE
- SYNC
- MTMSRD(r10) /* re-enable interrupts */
+2: andi. r0,r9,(_TIF_PERSYSCALL_MASK)
+ beq 4f
+
+ /* Clear per-syscall TIF flags if any are set, but _leave_
+ _TIF_SAVE_NVGPRS set in r9 since we haven't dealt with that
+ yet. */
+
+ li r11,_TIF_PERSYSCALL_MASK
+ addi r12,r12,TI_FLAGS
+3: lwarx r8,0,r12
+ andc r8,r8,r11
+#ifdef CONFIG_IBM405_ERR77
+ dcbt 0,r12
+#endif
+ stwcx. r8,0,r12
+ bne- 3b
+ subi r12,r12,TI_FLAGS
+
+4: /* Anything which requires enabling interrupts? */
+ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SAVE_NVGPRS)
+ beq 7f
+
+ /* Save NVGPRS if they're not saved already */
lwz r4,TRAP(r1)
andi. r4,r4,1
- beq 4f
+ beq 5f
SAVE_NVGPRS(r1)
li r4,0xc00
stw r4,TRAP(r1)
-4:
+
+ /* Re-enable interrupts */
+5: ori r10,r10,MSR_EE
+ SYNC
+ MTMSRD(r10)
+
+ andi. r0,r9,_TIF_SAVE_NVGPRS
+ bne save_user_nvgprs
+
+save_user_nvgprs_cont:
+ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
+ beq 7f
+
addi r3,r1,STACK_FRAME_OVERHEAD
bl do_syscall_trace_leave
REST_NVGPRS(r1)
-2:
- lwz r3,GPR3(r1)
+
+6: lwz r3,GPR3(r1)
LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */
SYNC
MTMSRD(r10) /* disable interrupts again */
rlwinm r12,r1,0,0,18 /* current_thread_info() */
lwz r9,TI_FLAGS(r12)
-5:
+7:
andi. r0,r9,_TIF_NEED_RESCHED
- bne 1f
+ bne 8f
lwz r5,_MSR(r1)
andi. r5,r5,MSR_PR
- beq syscall_exit_cont
+ beq ret_from_except
andi. r0,r9,_TIF_SIGPENDING
- beq syscall_exit_cont
+ beq ret_from_except
b do_user_signal
-1:
+8:
ori r10,r10,MSR_EE
SYNC
MTMSRD(r10) /* re-enable interrupts */
bl schedule
- b 2b
+ b 6b
+
+save_user_nvgprs:
+ lwz r8,TI_SIGFRAME(r12)
+
+.macro savewords start, end
+ 1: stw \start,4*(\start)(r8)
+ .section __ex_table,"a"
+ .align 2
+ .long 1b,save_user_nvgprs_fault
+ .previous
+ .if \end - \start
+ savewords "(\start+1)",\end
+ .endif
+.endm
+ savewords 14,31
+ b save_user_nvgprs_cont
+
+
+save_user_nvgprs_fault:
+ li r3,11 /* SIGSEGV */
+ lwz r4,TI_TASK(r12)
+ bl force_sigsegv
+ rlwinm r12,r1,0,0,18 /* current_thread_info() */
+ lwz r9,TI_FLAGS(r12)
+ b save_user_nvgprs_cont
+
#ifdef SHOW_SYSCALLS
do_show_syscall:
#ifdef SHOW_SYSCALLS_TASK
@@ -401,28 +462,10 @@ show_syscalls_task:
#endif /* SHOW_SYSCALLS */
/*
- * The sigsuspend and rt_sigsuspend system calls can call do_signal
- * and thus put the process into the stopped state where we might
- * want to examine its user state with ptrace. Therefore we need
- * to save all the nonvolatile registers (r13 - r31) before calling
- * the C code.
+ * The fork/clone functions need to copy the full register set into
+ * the child process. Therefore we need to save all the nonvolatile
+ * registers (r13 - r31) before calling the C code.
*/
- .globl ppc_sigsuspend
-ppc_sigsuspend:
- SAVE_NVGPRS(r1)
- lwz r0,TRAP(r1)
- rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */
- stw r0,TRAP(r1) /* register set saved */
- b sys_sigsuspend
-
- .globl ppc_rt_sigsuspend
-ppc_rt_sigsuspend:
- SAVE_NVGPRS(r1)
- lwz r0,TRAP(r1)
- rlwinm r0,r0,0,0,30
- stw r0,TRAP(r1)
- b sys_rt_sigsuspend
-
.globl ppc_fork
ppc_fork:
SAVE_NVGPRS(r1)
@@ -447,14 +490,6 @@ ppc_clone:
stw r0,TRAP(r1) /* register set saved */
b sys_clone
- .globl ppc_swapcontext
-ppc_swapcontext:
- SAVE_NVGPRS(r1)
- lwz r0,TRAP(r1)
- rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */
- stw r0,TRAP(r1) /* register set saved */
- b sys_swapcontext
-
/*
* Top-level page fault handling.
* This is in assembler because if do_page_fault tells us that
@@ -626,16 +661,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_601)
.long ret_from_except
#endif
- .globl sigreturn_exit
-sigreturn_exit:
- subi r1,r3,STACK_FRAME_OVERHEAD
- rlwinm r12,r1,0,0,18 /* current_thread_info() */
- lwz r9,TI_FLAGS(r12)
- andi. r0,r9,_TIF_SYSCALL_T_OR_A
- beq+ ret_from_except_full
- bl do_syscall_trace_leave
- /* fall through */
-
.globl ret_from_except_full
ret_from_except_full:
REST_NVGPRS(r1)
@@ -658,7 +683,7 @@ user_exc_return: /* r10 contains MSR_KERNEL here */
/* Check current_thread_info()->flags */
rlwinm r9,r1,0,0,18
lwz r9,TI_FLAGS(r9)
- andi. r0,r9,(_TIF_SIGPENDING|_TIF_NEED_RESCHED)
+ andi. r0,r9,(_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL)
bne do_work
restore_user:
diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S
index 5e61124581d0..fb5658bba285 100644
--- a/arch/ppc/kernel/misc.S
+++ b/arch/ppc/kernel/misc.S
@@ -1197,7 +1197,7 @@ _GLOBAL(sys_call_table)
.long sys_ssetmask
.long sys_setreuid /* 70 */
.long sys_setregid
- .long ppc_sigsuspend
+ .long sys_sigsuspend
.long sys_sigpending
.long sys_sethostname
.long sys_setrlimit /* 75 */
@@ -1303,7 +1303,7 @@ _GLOBAL(sys_call_table)
.long sys_rt_sigpending /* 175 */
.long sys_rt_sigtimedwait
.long sys_rt_sigqueueinfo
- .long ppc_rt_sigsuspend
+ .long sys_rt_sigsuspend
.long sys_pread64
.long sys_pwrite64 /* 180 */
.long sys_chown
@@ -1374,7 +1374,7 @@ _GLOBAL(sys_call_table)
.long sys_clock_gettime
.long sys_clock_getres
.long sys_clock_nanosleep
- .long ppc_swapcontext
+ .long sys_swapcontext
.long sys_tgkill /* 250 */
.long sys_utimes
.long sys_statfs64
diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c
index f7fae5f153b2..50c75eec8874 100644
--- a/arch/ppc/kernel/pci.c
+++ b/arch/ppc/kernel/pci.c
@@ -815,8 +815,7 @@ EXPORT_SYMBOL(pci_device_to_OF_node);
* to set pci_assign_all_buses to 1 and still use RTAS for PCI
* config cycles.
*/
-struct pci_controller*
-pci_find_hose_for_OF_device(struct device_node* node)
+struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node)
{
if (!have_of)
return NULL;
@@ -942,7 +941,7 @@ pci_process_bridge_OF_ranges(struct pci_controller *hose,
while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) {
res = NULL;
size = ranges[na+4];
- switch (ranges[0] >> 24) {
+ switch ((ranges[0] >> 24) & 0x3) {
case 1: /* I/O space */
if (ranges[2] != 0)
break;
@@ -956,6 +955,8 @@ pci_process_bridge_OF_ranges(struct pci_controller *hose,
res = &hose->io_resource;
res->flags = IORESOURCE_IO;
res->start = ranges[2];
+ DBG("PCI: IO 0x%lx -> 0x%lx\n",
+ res->start, res->start + size - 1);
break;
case 2: /* memory space */
memno = 0;
@@ -973,7 +974,11 @@ pci_process_bridge_OF_ranges(struct pci_controller *hose,
if (memno < 3) {
res = &hose->mem_resources[memno];
res->flags = IORESOURCE_MEM;
+ if(ranges[0] & 0x40000000)
+ res->flags |= IORESOURCE_PREFETCH;
res->start = ranges[na+2];
+ DBG("PCI: MEM[%d] 0x%lx -> 0x%lx\n", memno,
+ res->start, res->start + size - 1);
}
break;
}
@@ -1806,6 +1811,23 @@ void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
EXPORT_SYMBOL(pci_iomap);
EXPORT_SYMBOL(pci_iounmap);
+unsigned long pci_address_to_pio(phys_addr_t address)
+{
+ struct pci_controller* hose = hose_head;
+
+ for (; hose; hose = hose->next) {
+ unsigned int size = hose->io_resource.end -
+ hose->io_resource.start + 1;
+ if (address >= hose->io_base_phys &&
+ address < (hose->io_base_phys + size)) {
+ unsigned long base =
+ (unsigned long)hose->io_base_virt - _IO_BASE;
+ return base + (address - hose->io_base_phys);
+ }
+ }
+ return (unsigned int)-1;
+}
+EXPORT_SYMBOL(pci_address_to_pio);
/*
* Null PCI config access functions, for the case when we can't
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index bb6a5c6a64be..95075f99a6d4 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -82,10 +82,6 @@ EXPORT_SYMBOL(ppc_n_lost_interrupts);
EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
EXPORT_SYMBOL(DMA_MODE_READ);
EXPORT_SYMBOL(DMA_MODE_WRITE);
-#if defined(CONFIG_PPC_PREP)
-EXPORT_SYMBOL(_prep_type);
-EXPORT_SYMBOL(ucSystemType);
-#endif
#if !defined(__INLINE_BITOPS)
EXPORT_SYMBOL(set_bit);
@@ -311,7 +307,6 @@ EXPORT_SYMBOL(__res);
EXPORT_SYMBOL(next_mmu_context);
EXPORT_SYMBOL(set_context);
-EXPORT_SYMBOL_GPL(__handle_mm_fault); /* For MOL */
EXPORT_SYMBOL(disarm_decr);
#ifdef CONFIG_PPC_STD_MMU
extern long mol_trampoline;
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index 0eb0b7085e6a..e707c6f6e61b 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -744,6 +744,9 @@ void __init setup_arch(char **cmdline_p)
/* so udelay does something sensible, assume <= 1000 bogomips */
loops_per_jiffy = 500000000 / HZ;
+ if (ppc_md.init_early)
+ ppc_md.init_early();
+
#ifdef CONFIG_PPC_MULTIPLATFORM
/* This could be called "early setup arch", it must be done
* now because xmon need it
diff --git a/arch/ppc/platforms/85xx/Kconfig b/arch/ppc/platforms/85xx/Kconfig
index c5bc2821d991..7ddd331a7145 100644
--- a/arch/ppc/platforms/85xx/Kconfig
+++ b/arch/ppc/platforms/85xx/Kconfig
@@ -39,7 +39,7 @@ config MPC8560_ADS
config SBC8560
bool "WindRiver PowerQUICC III SBC8560"
help
- This option enables support for the WindRiver PowerQUICC III
+ This option enables support for the WindRiver PowerQUICC III
SBC8560 board.
config STX_GP3
@@ -48,6 +48,26 @@ config STX_GP3
This option enables support for the Silicon Turnkey Express GP3
board.
+config TQM8540
+ bool "TQ Components TQM8540"
+ help
+ This option enablese support for the TQ Components TQM8540 board.
+
+config TQM8541
+ bool "TQ Components TQM8541"
+ help
+ This option enablese support for the TQ Components TQM8541 board.
+
+config TQM8555
+ bool "TQ Components TQM8555"
+ help
+ This option enablese support for the TQ Components TQM8555 board.
+
+config TQM8560
+ bool "TQ Components TQM8560"
+ help
+ This option enablese support for the TQ Components TQM8560 board.
+
endchoice
# It's often necessary to know the specific 85xx processor type.
@@ -55,7 +75,7 @@ endchoice
# don't need to ask more redundant questions.
config MPC8540
bool
- depends on MPC8540_ADS
+ depends on MPC8540_ADS || TQM8540
default y
config MPC8548
@@ -65,12 +85,12 @@ config MPC8548
config MPC8555
bool
- depends on MPC8555_CDS
+ depends on MPC8555_CDS || TQM8541 || TQM8555
default y
config MPC8560
bool
- depends on SBC8560 || MPC8560_ADS || STX_GP3
+ depends on SBC8560 || MPC8560_ADS || STX_GP3 || TQM8560
default y
config 85xx_PCI2
diff --git a/arch/ppc/platforms/85xx/Makefile b/arch/ppc/platforms/85xx/Makefile
index efdf813108f2..6c4753c144d3 100644
--- a/arch/ppc/platforms/85xx/Makefile
+++ b/arch/ppc/platforms/85xx/Makefile
@@ -7,3 +7,7 @@ obj-$(CONFIG_MPC8555_CDS) += mpc85xx_cds_common.o
obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads_common.o mpc8560_ads.o
obj-$(CONFIG_SBC8560) += sbc85xx.o sbc8560.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o
+obj-$(CONFIG_TQM8540) += tqm85xx.o
+obj-$(CONFIG_TQM8541) += tqm85xx.o
+obj-$(CONFIG_TQM8555) += tqm85xx.o
+obj-$(CONFIG_TQM8560) += tqm85xx.o
diff --git a/arch/ppc/platforms/85xx/tqm85xx.c b/arch/ppc/platforms/85xx/tqm85xx.c
new file mode 100644
index 000000000000..c6dfd8f0f9df
--- /dev/null
+++ b/arch/ppc/platforms/85xx/tqm85xx.c
@@ -0,0 +1,419 @@
+/*
+ * arch/ppc/platforms/85xx/tqm85xx.c
+ *
+ * TQM85xx (40/41/55/60) board specific routines
+ *
+ * Copyright (c) 2005 DENX Software Engineering
+ * Stefan Roese <sr@denx.de>
+ *
+ * Based on original work by
+ * Kumar Gala <galak@kernel.crashing.org>
+ * Copyright 2004 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/serial.h>
+#include <linux/tty.h> /* for linux/serial_core.h */
+#include <linux/serial_core.h>
+#include <linux/initrd.h>
+#include <linux/module.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/open_pic.h>
+#include <asm/bootinfo.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc85xx.h>
+#include <asm/irq.h>
+#include <asm/immap_85xx.h>
+#include <asm/kgdb.h>
+#include <asm/ppc_sys.h>
+#include <asm/cpm2.h>
+#include <mm/mmu_decl.h>
+
+#include <syslib/ppc85xx_setup.h>
+#include <syslib/cpm2_pic.h>
+#include <syslib/ppc85xx_common.h>
+#include <syslib/ppc85xx_rio.h>
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+#endif
+
+
+extern unsigned long total_memory; /* in mm/init */
+
+unsigned char __res[sizeof (bd_t)];
+
+/* Internal interrupts are all Level Sensitive, and Positive Polarity */
+static u_char tqm85xx_openpic_initsenses[] __initdata = {
+ MPC85XX_INTERNAL_IRQ_SENSES,
+ 0x0, /* External 0: */
+ 0x0, /* External 1: */
+#if defined(CONFIG_PCI)
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI INTA */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI INTB */
+#else
+ 0x0, /* External 2: */
+ 0x0, /* External 3: */
+#endif
+ 0x0, /* External 4: */
+ 0x0, /* External 5: */
+ 0x0, /* External 6: */
+ 0x0, /* External 7: */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8: PHY */
+ 0x0, /* External 9: */
+ 0x0, /* External 10: */
+ 0x0, /* External 11: */
+};
+
+static const char *GFAR_PHY_0 = "phy0:2";
+static const char *GFAR_PHY_1 = "phy0:1";
+#ifdef CONFIG_MPC8540
+static const char *GFAR_PHY_3 = "phy0:3";
+#endif
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init
+tqm85xx_setup_arch(void)
+{
+ bd_t *binfo = (bd_t *) __res;
+ unsigned int freq;
+ struct gianfar_platform_data *pdata;
+ struct gianfar_mdio_data *mdata;
+
+#ifdef CONFIG_MPC8560
+ cpm2_reset();
+#endif
+
+ /* get the core frequency */
+ freq = binfo->bi_intfreq;
+
+ if (ppc_md.progress)
+ ppc_md.progress("tqm85xx_setup_arch()", 0);
+
+ /* Set loops_per_jiffy to a half-way reasonable value,
+ for use until calibrate_delay gets called. */
+ loops_per_jiffy = freq / HZ;
+
+#ifdef CONFIG_PCI
+ /* setup PCI host bridges */
+ mpc85xx_setup_hose();
+#endif
+
+#ifndef CONFIG_MPC8560
+#if defined(CONFIG_SERIAL_8250)
+ mpc85xx_early_serial_map();
+#endif
+
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+ /* Invalidate the entry we stole earlier the serial ports
+ * should be properly mapped */
+ invalidate_tlbcam_entry(num_tlbcam_entries - 1);
+#endif
+#endif /* CONFIG_MPC8560 */
+
+ /* setup the board related info for the MDIO bus */
+ mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+ mdata->irq[0] = MPC85xx_IRQ_EXT8;
+ mdata->irq[1] = MPC85xx_IRQ_EXT8;
+ mdata->irq[2] = -1;
+ mdata->irq[3] = MPC85xx_IRQ_EXT8;
+ mdata->irq[31] = -1;
+ mdata->paddr += binfo->bi_immr_base;
+
+ /* setup the board related information for the enet controllers */
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
+ if (pdata) {
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->bus_id = GFAR_PHY_0;
+ memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+ }
+
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
+ if (pdata) {
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->bus_id = GFAR_PHY_1;
+ memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
+ }
+
+#ifdef CONFIG_MPC8540
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC);
+ if (pdata) {
+ pdata->board_flags = 0;
+ pdata->bus_id = GFAR_PHY_3;
+ memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6);
+ }
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+}
+
+#ifdef CONFIG_MPC8560
+static irqreturn_t cpm2_cascade(int irq, void *dev_id, struct pt_regs *regs)
+{
+ while ((irq = cpm2_get_irq(regs)) >= 0)
+ __do_IRQ(irq, regs);
+ return IRQ_HANDLED;
+}
+
+static struct irqaction cpm2_irqaction = {
+ .handler = cpm2_cascade,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+ .name = "cpm2_cascade",
+};
+#endif /* CONFIG_MPC8560 */
+
+void __init
+tqm85xx_init_IRQ(void)
+{
+ bd_t *binfo = (bd_t *) __res;
+
+ /* Determine the Physical Address of the OpenPIC regs */
+ phys_addr_t OpenPIC_PAddr =
+ binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
+ OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
+ OpenPIC_InitSenses = tqm85xx_openpic_initsenses;
+ OpenPIC_NumInitSenses = sizeof (tqm85xx_openpic_initsenses);
+
+ /* Skip reserved space and internal sources */
+ openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
+
+ /* Map PIC IRQs 0-11 */
+ openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000);
+
+ /* we let openpic interrupts starting from an offset, to
+ * leave space for cascading interrupts underneath.
+ */
+ openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
+
+#ifdef CONFIG_MPC8560
+ /* Setup CPM2 PIC */
+ cpm2_init_IRQ();
+
+ setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction);
+#endif /* CONFIG_MPC8560 */
+
+ return;
+}
+
+int tqm85xx_show_cpuinfo(struct seq_file *m)
+{
+ uint pvid, svid, phid1;
+ uint memsize = total_memory;
+ bd_t *binfo = (bd_t *) __res;
+ unsigned int freq;
+
+ /* get the core frequency */
+ freq = binfo->bi_intfreq;
+
+ pvid = mfspr(SPRN_PVR);
+ svid = mfspr(SPRN_SVR);
+
+ seq_printf(m, "Vendor\t\t: TQ Components\n");
+ seq_printf(m, "Machine\t\t: TQM%s\n", cur_ppc_sys_spec->ppc_sys_name);
+ seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000);
+ seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+ /* Display cpu Pll setting */
+ phid1 = mfspr(SPRN_HID1);
+ seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+
+ /* Display the amount of memory */
+ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+
+ return 0;
+}
+
+#if defined(CONFIG_I2C) && defined(CONFIG_SENSORS_DS1337)
+extern ulong ds1337_get_rtc_time(void);
+extern int ds1337_set_rtc_time(unsigned long nowtime);
+
+static int __init
+tqm85xx_rtc_hookup(void)
+{
+ struct timespec tv;
+
+ ppc_md.set_rtc_time = ds1337_set_rtc_time;
+ ppc_md.get_rtc_time = ds1337_get_rtc_time;
+
+ tv.tv_nsec = 0;
+ tv.tv_sec = (ppc_md.get_rtc_time)();
+ do_settimeofday(&tv);
+
+ return 0;
+}
+late_initcall(tqm85xx_rtc_hookup);
+#endif
+
+#ifdef CONFIG_PCI
+/*
+ * interrupt routing
+ */
+int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ {PIRQA, PIRQB, 0, 0},
+ };
+
+ const long min_idsel = 0x1c, max_idsel = 0x1c, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+
+int mpc85xx_exclude_device(u_char bus, u_char devfn)
+{
+ if (bus == 0 && PCI_SLOT(devfn) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ else
+ return PCIBIOS_SUCCESSFUL;
+}
+
+#endif /* CONFIG_PCI */
+
+#ifdef CONFIG_RAPIDIO
+void platform_rio_init(void)
+{
+ /* 512MB RIO LAW at 0xc0000000 */
+ mpc85xx_rio_setup(0xc0000000, 0x20000000);
+}
+#endif /* CONFIG_RAPIDIO */
+
+/* ************************************************************************ */
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ /* parse_bootinfo must always be called first */
+ parse_bootinfo(find_bootinfo());
+
+ /*
+ * If we were passed in a board information, copy it into the
+ * residual data area.
+ */
+ if (r3) {
+ memcpy((void *) __res, (void *) (r3 + KERNELBASE),
+ sizeof (bd_t));
+ }
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) && !defined(CONFIG_MPC8560)
+ {
+ bd_t *binfo = (bd_t *) __res;
+ struct uart_port p;
+
+ /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */
+ settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base,
+ binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
+
+ memset(&p, 0, sizeof (p));
+ p.iotype = SERIAL_IO_MEM;
+ p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
+ p.uartclk = binfo->bi_busfreq;
+
+ gen550_init(0, &p);
+
+ memset(&p, 0, sizeof (p));
+ p.iotype = SERIAL_IO_MEM;
+ p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
+ p.uartclk = binfo->bi_busfreq;
+
+ gen550_init(1, &p);
+ }
+#endif
+
+#if defined(CONFIG_BLK_DEV_INITRD)
+ /*
+ * If the init RAM disk has been configured in, and there's a valid
+ * starting address for it, set it up.
+ */
+ if (r4) {
+ initrd_start = r4 + KERNELBASE;
+ initrd_end = r5 + KERNELBASE;
+ }
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+ /* Copy the kernel command line arguments to a safe place. */
+
+ if (r6) {
+ *(char *) (r7 + KERNELBASE) = 0;
+ strcpy(cmd_line, (char *) (r6 + KERNELBASE));
+ }
+
+ identify_ppc_sys_by_id(mfspr(SPRN_SVR));
+
+ /* setup the PowerPC module struct */
+ ppc_md.setup_arch = tqm85xx_setup_arch;
+ ppc_md.show_cpuinfo = tqm85xx_show_cpuinfo;
+
+ ppc_md.init_IRQ = tqm85xx_init_IRQ;
+ ppc_md.get_irq = openpic_get_irq;
+
+ ppc_md.restart = mpc85xx_restart;
+ ppc_md.power_off = mpc85xx_power_off;
+ ppc_md.halt = mpc85xx_halt;
+
+ ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
+
+ ppc_md.time_init = NULL;
+ ppc_md.set_rtc_time = NULL;
+ ppc_md.get_rtc_time = NULL;
+ ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
+
+#ifndef CONFIG_MPC8560
+#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
+ ppc_md.progress = gen550_progress;
+#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
+#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
+ ppc_md.early_serial_map = mpc85xx_early_serial_map;
+#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */
+#endif /* CONFIG_MPC8560 */
+
+ if (ppc_md.progress)
+ ppc_md.progress("tqm85xx_init(): exit", 0);
+
+ return;
+}
diff --git a/arch/ppc/platforms/85xx/tqm85xx.h b/arch/ppc/platforms/85xx/tqm85xx.h
new file mode 100644
index 000000000000..3775eb363fde
--- /dev/null
+++ b/arch/ppc/platforms/85xx/tqm85xx.h
@@ -0,0 +1,56 @@
+/*
+ * arch/ppc/platforms/85xx/tqm85xx.h
+ *
+ * TQM85xx (40/41/55/60) board definitions
+ *
+ * Copyright (c) 2005 DENX Software Engineering
+ * Stefan Roese <sr@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_TQM85XX_H
+#define __MACH_TQM85XX_H
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/ppcboot.h>
+
+#define BOARD_CCSRBAR ((uint)0xe0000000)
+#define CCSRBAR_SIZE ((uint)1024*1024)
+
+#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET)
+
+#define PCI_CFG_ADDR_OFFSET (0x8000)
+#define PCI_CFG_DATA_OFFSET (0x8004)
+
+/* PCI interrupt controller */
+#define PIRQA MPC85xx_IRQ_EXT2
+#define PIRQB MPC85xx_IRQ_EXT3
+
+#define MPC85XX_PCI1_LOWER_IO 0x00000000
+#define MPC85XX_PCI1_UPPER_IO 0x00ffffff
+
+#define MPC85XX_PCI1_LOWER_MEM 0x80000000
+#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff
+
+#define MPC85XX_PCI1_IO_BASE 0xe2000000
+#define MPC85XX_PCI1_MEM_OFFSET 0x00000000
+
+#define MPC85XX_PCI1_IO_SIZE 0x01000000
+
+#define BASE_BAUD 115200
+
+extern void mpc85xx_setup_hose(void) __init;
+extern void mpc85xx_restart(char *cmd);
+extern void mpc85xx_power_off(void);
+extern void mpc85xx_halt(void);
+extern void mpc85xx_init_IRQ(void) __init;
+extern unsigned long mpc85xx_find_end_of_memory(void) __init;
+extern void mpc85xx_calibrate_decr(void) __init;
+
+#endif /* __MACH_TQM85XX_H */
diff --git a/arch/ppc/platforms/chrp_setup.c b/arch/ppc/platforms/chrp_setup.c
index f1b70ab3c6fd..056ac2a7b5c1 100644
--- a/arch/ppc/platforms/chrp_setup.c
+++ b/arch/ppc/platforms/chrp_setup.c
@@ -404,7 +404,6 @@ static struct irqaction xmon_irqaction = {
void __init chrp_init_IRQ(void)
{
struct device_node *np;
- int i;
unsigned long chrp_int_ack = 0;
unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS];
#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c
index 4415748071dc..d06535802003 100644
--- a/arch/ppc/platforms/prep_setup.c
+++ b/arch/ppc/platforms/prep_setup.c
@@ -72,7 +72,6 @@
TODC_ALLOC();
-unsigned char ucSystemType;
unsigned char ucBoardRev;
unsigned char ucBoardRevMaj, ucBoardRevMin;
@@ -954,7 +953,6 @@ prep_calibrate_decr(void)
static void __init
prep_init_IRQ(void)
{
- int i;
unsigned int pci_viddid, pci_did;
if (OpenPIC_Addr != NULL) {
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index 5b7f2b80e56e..84ef03018d0e 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -96,7 +96,7 @@ ifeq ($(CONFIG_85xx),y)
obj-$(CONFIG_PCI) += pci_auto.o
endif
obj-$(CONFIG_RAPIDIO) += ppc85xx_rio.o
-obj-$(CONFIG_83xx) += ipic.o ppc83xx_setup.o ppc_sys.o \
+obj-$(CONFIG_83xx) += ppc83xx_setup.o ppc_sys.o \
mpc83xx_sys.o mpc83xx_devices.o
ifeq ($(CONFIG_83xx),y)
obj-$(CONFIG_PCI) += pci_auto.o
diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c
index 1cc3abe6fa43..688616de3cde 100644
--- a/arch/ppc/syslib/m8xx_setup.c
+++ b/arch/ppc/syslib/m8xx_setup.c
@@ -135,6 +135,16 @@ static struct irqaction tbint_irqaction = {
.name = "tbint",
};
+/* per-board overridable init_internal_rtc() function. */
+void __init __attribute__ ((weak))
+init_internal_rtc(void)
+{
+ /* Disable the RTC one second and alarm interrupts. */
+ out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, in_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc) & ~(RTCSC_SIE | RTCSC_ALE));
+ /* Enable the RTC */
+ out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, in_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc) | (RTCSC_RTF | RTCSC_RTE));
+}
+
/* The decrementer counts at the system (internal) clock frequency divided by
* sixteen, or external oscillator divided by four. We force the processor
* to use system clock divided by sixteen.
@@ -183,10 +193,7 @@ void __init m8xx_calibrate_decr(void)
out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck, KAPWR_KEY);
out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk, KAPWR_KEY);
- /* Disable the RTC one second and alarm interrupts. */
- out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, in_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc) & ~(RTCSC_SIE | RTCSC_ALE));
- /* Enable the RTC */
- out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, in_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc) | (RTCSC_RTF | RTCSC_RTE));
+ init_internal_rtc();
/* Enabling the decrementer also enables the timebase interrupts
* (or from the other point of view, to get decrementer interrupts
diff --git a/arch/ppc/syslib/m8xx_wdt.c b/arch/ppc/syslib/m8xx_wdt.c
index a21632d37e5a..df6c9557b86a 100644
--- a/arch/ppc/syslib/m8xx_wdt.c
+++ b/arch/ppc/syslib/m8xx_wdt.c
@@ -19,6 +19,7 @@
#include <syslib/m8xx_wdt.h>
static int wdt_timeout;
+int m8xx_has_internal_rtc = 0;
static irqreturn_t m8xx_wdt_interrupt(int, void *, struct pt_regs *);
static struct irqaction m8xx_wdt_irqaction = {
@@ -45,35 +46,15 @@ static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev, struct pt_regs *regs)
return IRQ_HANDLED;
}
-void __init m8xx_wdt_handler_install(bd_t * binfo)
+#define SYPCR_SWP 0x1
+#define SYPCR_SWE 0x4
+
+
+void __init m8xx_wdt_install_irq(volatile immap_t *imap, bd_t *binfo)
{
- volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
u32 pitc;
- u32 sypcr;
u32 pitrtclk;
- sypcr = in_be32(&imap->im_siu_conf.sc_sypcr);
-
- if (!(sypcr & 0x04)) {
- printk(KERN_NOTICE "m8xx_wdt: wdt disabled (SYPCR: 0x%08X)\n",
- sypcr);
- return;
- }
-
- m8xx_wdt_reset();
-
- printk(KERN_NOTICE
- "m8xx_wdt: active wdt found (SWTC: 0x%04X, SWP: 0x%01X)\n",
- (sypcr >> 16), sypcr & 0x01);
-
- wdt_timeout = (sypcr >> 16) & 0xFFFF;
-
- if (!wdt_timeout)
- wdt_timeout = 0xFFFF;
-
- if (sypcr & 0x01)
- wdt_timeout *= 2048;
-
/*
* Fire trigger if half of the wdt ticked down
*/
@@ -98,6 +79,67 @@ void __init m8xx_wdt_handler_install(bd_t * binfo)
printk(KERN_NOTICE
"m8xx_wdt: keep-alive trigger installed (PITC: 0x%04X)\n", pitc);
+}
+
+static void m8xx_wdt_timer_func(unsigned long data);
+
+static struct timer_list m8xx_wdt_timer =
+ TIMER_INITIALIZER(m8xx_wdt_timer_func, 0, 0);
+
+void m8xx_wdt_stop_timer(void)
+{
+ del_timer(&m8xx_wdt_timer);
+}
+
+void m8xx_wdt_install_timer(void)
+{
+ m8xx_wdt_timer.expires = jiffies + (HZ/2);
+ add_timer(&m8xx_wdt_timer);
+}
+
+static void m8xx_wdt_timer_func(unsigned long data)
+{
+ m8xx_wdt_reset();
+ m8xx_wdt_install_timer();
+}
+
+void __init m8xx_wdt_handler_install(bd_t * binfo)
+{
+ volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
+ u32 sypcr;
+
+ sypcr = in_be32(&imap->im_siu_conf.sc_sypcr);
+
+ if (!(sypcr & SYPCR_SWE)) {
+ printk(KERN_NOTICE "m8xx_wdt: wdt disabled (SYPCR: 0x%08X)\n",
+ sypcr);
+ return;
+ }
+
+ m8xx_wdt_reset();
+
+ printk(KERN_NOTICE
+ "m8xx_wdt: active wdt found (SWTC: 0x%04X, SWP: 0x%01X)\n",
+ (sypcr >> 16), sypcr & SYPCR_SWP);
+
+ wdt_timeout = (sypcr >> 16) & 0xFFFF;
+
+ if (!wdt_timeout)
+ wdt_timeout = 0xFFFF;
+
+ if (sypcr & SYPCR_SWP)
+ wdt_timeout *= 2048;
+
+ m8xx_has_internal_rtc = in_be16(&imap->im_sit.sit_rtcsc) & RTCSC_RTE;
+
+ /* if the internal RTC is off use a kernel timer */
+ if (!m8xx_has_internal_rtc) {
+ if (wdt_timeout < (binfo->bi_intfreq/HZ))
+ printk(KERN_ERR "m8xx_wdt: timeout too short for ktimer!\n");
+ m8xx_wdt_install_timer();
+ } else
+ m8xx_wdt_install_irq(imap, binfo);
+
wdt_timeout /= binfo->bi_intfreq;
}
diff --git a/arch/ppc/syslib/m8xx_wdt.h b/arch/ppc/syslib/m8xx_wdt.h
index 0d81a9f8155f..e75835f0012b 100644
--- a/arch/ppc/syslib/m8xx_wdt.h
+++ b/arch/ppc/syslib/m8xx_wdt.h
@@ -9,8 +9,12 @@
#ifndef _PPC_SYSLIB_M8XX_WDT_H
#define _PPC_SYSLIB_M8XX_WDT_H
+extern int m8xx_has_internal_rtc;
+
extern void m8xx_wdt_handler_install(bd_t * binfo);
extern int m8xx_wdt_get_timeout(void);
extern void m8xx_wdt_reset(void);
+extern void m8xx_wdt_install_timer(void);
+extern void m8xx_wdt_stop_timer(void);
#endif /* _PPC_SYSLIB_M8XX_WDT_H */
diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index af7cb2bfd670..01f042f6f1c4 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -1083,23 +1083,33 @@ static int swim3_add_device(struct device_node *swim)
{
struct device_node *mediabay;
struct floppy_state *fs = &floppy_states[floppy_count];
+ struct resource res_reg, res_dma;
- if (swim->n_addrs < 2)
- {
- printk(KERN_INFO "swim3: expecting 2 addrs (n_addrs:%d, n_intrs:%d)\n",
- swim->n_addrs, swim->n_intrs);
+ if (of_address_to_resource(swim, 0, &res_reg) ||
+ of_address_to_resource(swim, 1, &res_dma)) {
+ printk(KERN_ERR "swim3: Can't get addresses\n");
return -EINVAL;
}
-
- if (swim->n_intrs < 2)
- {
- printk(KERN_INFO "swim3: expecting 2 intrs (n_addrs:%d, n_intrs:%d)\n",
- swim->n_addrs, swim->n_intrs);
+ if (request_mem_region(res_reg.start, res_reg.end - res_reg.start + 1,
+ " (reg)") == NULL) {
+ printk(KERN_ERR "swim3: Can't request register space\n");
+ return -EINVAL;
+ }
+ if (request_mem_region(res_dma.start, res_dma.end - res_dma.start + 1,
+ " (dma)") == NULL) {
+ release_mem_region(res_reg.start,
+ res_reg.end - res_reg.start + 1);
+ printk(KERN_ERR "swim3: Can't request DMA space\n");
return -EINVAL;
}
- if (!request_OF_resource(swim, 0, NULL)) {
- printk(KERN_INFO "swim3: can't request IO resource !\n");
+ if (swim->n_intrs < 2) {
+ printk(KERN_INFO "swim3: expecting 2 intrs (n_intrs:%d)\n",
+ swim->n_intrs);
+ release_mem_region(res_reg.start,
+ res_reg.end - res_reg.start + 1);
+ release_mem_region(res_dma.start,
+ res_dma.end - res_dma.start + 1);
return -EINVAL;
}
@@ -1110,10 +1120,8 @@ static int swim3_add_device(struct device_node *swim)
memset(fs, 0, sizeof(*fs));
spin_lock_init(&fs->lock);
fs->state = idle;
- fs->swim3 = (struct swim3 __iomem *)
- ioremap(swim->addrs[0].address, 0x200);
- fs->dma = (struct dbdma_regs __iomem *)
- ioremap(swim->addrs[1].address, 0x200);
+ fs->swim3 = (struct swim3 __iomem *)ioremap(res_reg.start, 0x200);
+ fs->dma = (struct dbdma_regs __iomem *)ioremap(res_dma.start, 0x200);
fs->swim3_intr = swim->intrs[0].line;
fs->dma_intr = swim->intrs[1].line;
fs->cur_cyl = -1;
diff --git a/drivers/char/watchdog/mpc8xx_wdt.c b/drivers/char/watchdog/mpc8xx_wdt.c
index 56d62ba7c6ce..b2fc71e20850 100644
--- a/drivers/char/watchdog/mpc8xx_wdt.c
+++ b/drivers/char/watchdog/mpc8xx_wdt.c
@@ -18,6 +18,7 @@
#include <linux/watchdog.h>
#include <asm/8xx_immap.h>
#include <asm/uaccess.h>
+#include <asm/io.h>
#include <syslib/m8xx_wdt.h>
static unsigned long wdt_opened;
@@ -25,18 +26,26 @@ static int wdt_status;
static void mpc8xx_wdt_handler_disable(void)
{
- volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
+ volatile uint __iomem *piscr;
+ piscr = (uint *)&((immap_t*)IMAP_ADDR)->im_sit.sit_piscr;
- imap->im_sit.sit_piscr &= ~(PISCR_PIE | PISCR_PTE);
+ if (!m8xx_has_internal_rtc)
+ m8xx_wdt_stop_timer();
+ else
+ out_be32(piscr, in_be32(piscr) & ~(PISCR_PIE | PISCR_PTE));
printk(KERN_NOTICE "mpc8xx_wdt: keep-alive handler deactivated\n");
}
static void mpc8xx_wdt_handler_enable(void)
{
- volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
+ volatile uint __iomem *piscr;
+ piscr = (uint *)&((immap_t*)IMAP_ADDR)->im_sit.sit_piscr;
- imap->im_sit.sit_piscr |= PISCR_PIE | PISCR_PTE;
+ if (!m8xx_has_internal_rtc)
+ m8xx_wdt_install_timer();
+ else
+ out_be32(piscr, in_be32(piscr) | PISCR_PIE | PISCR_PTE);
printk(KERN_NOTICE "mpc8xx_wdt: keep-alive handler activated\n");
}
@@ -68,9 +77,6 @@ static int mpc8xx_wdt_release(struct inode *inode, struct file *file)
static ssize_t mpc8xx_wdt_write(struct file *file, const char *data, size_t len,
loff_t * ppos)
{
- if (ppos != &file->f_pos)
- return -ESPIPE;
-
if (len)
m8xx_wdt_reset();
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 4010fe92e72b..08d5b8fed2dc 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -236,27 +236,17 @@ config I2C_IXP2000
This support is also available as a module. If so, the module
will be called i2c-ixp2000.
-config I2C_KEYWEST
- tristate "Powermac Keywest I2C interface"
+config I2C_POWERMAC
+ tristate "Powermac I2C interface"
depends on I2C && PPC_PMAC
+ default y
help
- This supports the use of the I2C interface in the combo-I/O
- chip on recent Apple machines. Say Y if you have such a machine.
-
- This support is also available as a module. If so, the module
- will be called i2c-keywest.
-
-config I2C_PMAC_SMU
- tristate "Powermac SMU I2C interface"
- depends on I2C && PMAC_SMU
- help
- This supports the use of the I2C interface in the SMU
- chip on recent Apple machines like the iMac G5. It is used
- among others by the thermal control driver for those machines.
- Say Y if you have such a machine.
+ This exposes the various PowerMac i2c interfaces to the linux i2c
+ layer and to userland. It is used by various drivers on the powemac
+ platform, thus should generally be enabled.
This support is also available as a module. If so, the module
- will be called i2c-pmac-smu.
+ will be called i2c-powermac.
config I2C_MPC
tristate "MPC107/824x/85xx/52xx"
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index f1df00f66c6c..b44831dff683 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -19,8 +19,7 @@ obj-$(CONFIG_I2C_ISA) += i2c-isa.o
obj-$(CONFIG_I2C_ITE) += i2c-ite.o
obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o
obj-$(CONFIG_I2C_IXP4XX) += i2c-ixp4xx.o
-obj-$(CONFIG_I2C_KEYWEST) += i2c-keywest.o
-obj-$(CONFIG_I2C_PMAC_SMU) += i2c-pmac-smu.o
+obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o
diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c
deleted file mode 100644
index d61f748278fc..000000000000
--- a/drivers/i2c/busses/i2c-keywest.c
+++ /dev/null
@@ -1,751 +0,0 @@
-/*
- i2c Support for Apple Keywest I2C Bus Controller
-
- Copyright (c) 2001 Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- Original work by
-
- Copyright (c) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Changes:
-
- 2001/12/13 BenH New implementation
- 2001/12/15 BenH Add support for "byte" and "quick"
- transfers. Add i2c_xfer routine.
- 2003/09/21 BenH Rework state machine with Paulus help
- 2004/01/21 BenH Merge in Greg KH changes, polled mode is back
- 2004/02/05 BenH Merge 64 bits fixes from the g5 ppc64 tree
-
- My understanding of the various modes supported by keywest are:
-
- - Dumb mode : not implemented, probably direct tweaking of lines
- - Standard mode : simple i2c transaction of type
- S Addr R/W A Data A Data ... T
- - Standard sub mode : combined 8 bit subaddr write with data read
- S Addr R/W A SubAddr A Data A Data ... T
- - Combined mode : Subaddress and Data sequences appended with no stop
- S Addr R/W A SubAddr S Addr R/W A Data A Data ... T
-
- Currently, this driver uses only Standard mode for i2c xfer, and
- smbus byte & quick transfers ; and uses StandardSub mode for
- other smbus transfers instead of combined as we need that for the
- sound driver to be happy
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/timer.h>
-#include <linux/spinlock.h>
-#include <linux/completion.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/machdep.h>
-#include <asm/pmac_feature.h>
-#include <asm/pmac_low_i2c.h>
-
-#include "i2c-keywest.h"
-
-#undef POLLED_MODE
-
-/* Some debug macros */
-#define WRONG_STATE(name) do {\
- pr_debug("KW: wrong state. Got %s, state: %s (isr: %02x)\n", \
- name, __kw_state_names[iface->state], isr); \
- } while(0)
-
-#ifdef DEBUG
-static const char *__kw_state_names[] = {
- "state_idle",
- "state_addr",
- "state_read",
- "state_write",
- "state_stop",
- "state_dead"
-};
-#endif /* DEBUG */
-
-MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
-MODULE_DESCRIPTION("I2C driver for Apple's Keywest");
-MODULE_LICENSE("GPL");
-
-#ifdef POLLED_MODE
-/* Don't schedule, the g5 fan controller is too
- * timing sensitive
- */
-static u8
-wait_interrupt(struct keywest_iface* iface)
-{
- int i;
- u8 isr;
-
- for (i = 0; i < 200000; i++) {
- isr = read_reg(reg_isr) & KW_I2C_IRQ_MASK;
- if (isr != 0)
- return isr;
- udelay(10);
- }
- return isr;
-}
-#endif /* POLLED_MODE */
-
-static void
-do_stop(struct keywest_iface* iface, int result)
-{
- write_reg(reg_control, KW_I2C_CTL_STOP);
- iface->state = state_stop;
- iface->result = result;
-}
-
-/* Main state machine for standard & standard sub mode */
-static void
-handle_interrupt(struct keywest_iface *iface, u8 isr)
-{
- int ack;
-
- if (isr == 0) {
- if (iface->state != state_stop) {
- pr_debug("KW: Timeout !\n");
- do_stop(iface, -EIO);
- }
- if (iface->state == state_stop) {
- ack = read_reg(reg_status);
- if (!(ack & KW_I2C_STAT_BUSY)) {
- iface->state = state_idle;
- write_reg(reg_ier, 0x00);
-#ifndef POLLED_MODE
- complete(&iface->complete);
-#endif /* POLLED_MODE */
- }
- }
- return;
- }
-
- if (isr & KW_I2C_IRQ_ADDR) {
- ack = read_reg(reg_status);
- if (iface->state != state_addr) {
- write_reg(reg_isr, KW_I2C_IRQ_ADDR);
- WRONG_STATE("KW_I2C_IRQ_ADDR");
- do_stop(iface, -EIO);
- return;
- }
- if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
- iface->state = state_stop;
- iface->result = -ENODEV;
- pr_debug("KW: NAK on address\n");
- } else {
- /* Handle rw "quick" mode */
- if (iface->datalen == 0) {
- do_stop(iface, 0);
- } else if (iface->read_write == I2C_SMBUS_READ) {
- iface->state = state_read;
- if (iface->datalen > 1)
- write_reg(reg_control, KW_I2C_CTL_AAK);
- } else {
- iface->state = state_write;
- write_reg(reg_data, *(iface->data++));
- iface->datalen--;
- }
- }
- write_reg(reg_isr, KW_I2C_IRQ_ADDR);
- }
-
- if (isr & KW_I2C_IRQ_DATA) {
- if (iface->state == state_read) {
- *(iface->data++) = read_reg(reg_data);
- write_reg(reg_isr, KW_I2C_IRQ_DATA);
- iface->datalen--;
- if (iface->datalen == 0)
- iface->state = state_stop;
- else if (iface->datalen == 1)
- write_reg(reg_control, 0);
- } else if (iface->state == state_write) {
- /* Check ack status */
- ack = read_reg(reg_status);
- if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
- pr_debug("KW: nack on data write (%x): %x\n",
- iface->data[-1], ack);
- do_stop(iface, -EIO);
- } else if (iface->datalen) {
- write_reg(reg_data, *(iface->data++));
- iface->datalen--;
- } else {
- write_reg(reg_control, KW_I2C_CTL_STOP);
- iface->state = state_stop;
- iface->result = 0;
- }
- write_reg(reg_isr, KW_I2C_IRQ_DATA);
- } else {
- write_reg(reg_isr, KW_I2C_IRQ_DATA);
- WRONG_STATE("KW_I2C_IRQ_DATA");
- if (iface->state != state_stop)
- do_stop(iface, -EIO);
- }
- }
-
- if (isr & KW_I2C_IRQ_STOP) {
- write_reg(reg_isr, KW_I2C_IRQ_STOP);
- if (iface->state != state_stop) {
- WRONG_STATE("KW_I2C_IRQ_STOP");
- iface->result = -EIO;
- }
- iface->state = state_idle;
- write_reg(reg_ier, 0x00);
-#ifndef POLLED_MODE
- complete(&iface->complete);
-#endif /* POLLED_MODE */
- }
-
- if (isr & KW_I2C_IRQ_START)
- write_reg(reg_isr, KW_I2C_IRQ_START);
-}
-
-#ifndef POLLED_MODE
-
-/* Interrupt handler */
-static irqreturn_t
-keywest_irq(int irq, void *dev_id, struct pt_regs *regs)
-{
- struct keywest_iface *iface = (struct keywest_iface *)dev_id;
- unsigned long flags;
-
- spin_lock_irqsave(&iface->lock, flags);
- del_timer(&iface->timeout_timer);
- handle_interrupt(iface, read_reg(reg_isr));
- if (iface->state != state_idle) {
- iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
- add_timer(&iface->timeout_timer);
- }
- spin_unlock_irqrestore(&iface->lock, flags);
- return IRQ_HANDLED;
-}
-
-static void
-keywest_timeout(unsigned long data)
-{
- struct keywest_iface *iface = (struct keywest_iface *)data;
- unsigned long flags;
-
- pr_debug("timeout !\n");
- spin_lock_irqsave(&iface->lock, flags);
- handle_interrupt(iface, read_reg(reg_isr));
- if (iface->state != state_idle) {
- iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
- add_timer(&iface->timeout_timer);
- }
- spin_unlock_irqrestore(&iface->lock, flags);
-}
-
-#endif /* POLLED_MODE */
-
-/*
- * SMBUS-type transfer entrypoint
- */
-static s32
-keywest_smbus_xfer( struct i2c_adapter* adap,
- u16 addr,
- unsigned short flags,
- char read_write,
- u8 command,
- int size,
- union i2c_smbus_data* data)
-{
- struct keywest_chan* chan = i2c_get_adapdata(adap);
- struct keywest_iface* iface = chan->iface;
- int len;
- u8* buffer;
- u16 cur_word;
- int rc = 0;
-
- if (iface->state == state_dead)
- return -ENXIO;
-
- /* Prepare datas & select mode */
- iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK;
- switch (size) {
- case I2C_SMBUS_QUICK:
- len = 0;
- buffer = NULL;
- iface->cur_mode |= KW_I2C_MODE_STANDARD;
- break;
- case I2C_SMBUS_BYTE:
- len = 1;
- buffer = &data->byte;
- iface->cur_mode |= KW_I2C_MODE_STANDARD;
- break;
- case I2C_SMBUS_BYTE_DATA:
- len = 1;
- buffer = &data->byte;
- iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
- break;
- case I2C_SMBUS_WORD_DATA:
- len = 2;
- cur_word = cpu_to_le16(data->word);
- buffer = (u8 *)&cur_word;
- iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
- break;
- case I2C_SMBUS_BLOCK_DATA:
- len = data->block[0];
- buffer = &data->block[1];
- iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
- break;
- default:
- return -1;
- }
-
- /* Turn a standardsub read into a combined mode access */
- if (read_write == I2C_SMBUS_READ
- && (iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB) {
- iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK;
- iface->cur_mode |= KW_I2C_MODE_COMBINED;
- }
-
- /* Original driver had this limitation */
- if (len > 32)
- len = 32;
-
- if (pmac_low_i2c_lock(iface->node))
- return -ENXIO;
-
- pr_debug("chan: %d, addr: 0x%x, transfer len: %d, read: %d\n",
- chan->chan_no, addr, len, read_write == I2C_SMBUS_READ);
-
- iface->data = buffer;
- iface->datalen = len;
- iface->state = state_addr;
- iface->result = 0;
- iface->read_write = read_write;
-
- /* Setup channel & clear pending irqs */
- write_reg(reg_isr, read_reg(reg_isr));
- write_reg(reg_mode, iface->cur_mode | (chan->chan_no << 4));
- write_reg(reg_status, 0);
-
- /* Set up address and r/w bit */
- write_reg(reg_addr,
- (addr << 1) | ((read_write == I2C_SMBUS_READ) ? 0x01 : 0x00));
-
- /* Set up the sub address */
- if ((iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB
- || (iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_COMBINED)
- write_reg(reg_subaddr, command);
-
-#ifndef POLLED_MODE
- /* Arm timeout */
- iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
- add_timer(&iface->timeout_timer);
-#endif
-
- /* Start sending address & enable interrupt*/
- write_reg(reg_control, KW_I2C_CTL_XADDR);
- write_reg(reg_ier, KW_I2C_IRQ_MASK);
-
-#ifdef POLLED_MODE
- pr_debug("using polled mode...\n");
- /* State machine, to turn into an interrupt handler */
- while(iface->state != state_idle) {
- unsigned long flags;
-
- u8 isr = wait_interrupt(iface);
- spin_lock_irqsave(&iface->lock, flags);
- handle_interrupt(iface, isr);
- spin_unlock_irqrestore(&iface->lock, flags);
- }
-#else /* POLLED_MODE */
- pr_debug("using interrupt mode...\n");
- wait_for_completion(&iface->complete);
-#endif /* POLLED_MODE */
-
- rc = iface->result;
- pr_debug("transfer done, result: %d\n", rc);
-
- if (rc == 0 && size == I2C_SMBUS_WORD_DATA && read_write == I2C_SMBUS_READ)
- data->word = le16_to_cpu(cur_word);
-
- /* Release sem */
- pmac_low_i2c_unlock(iface->node);
-
- return rc;
-}
-
-/*
- * Generic i2c master transfer entrypoint
- */
-static int
-keywest_xfer( struct i2c_adapter *adap,
- struct i2c_msg *msgs,
- int num)
-{
- struct keywest_chan* chan = i2c_get_adapdata(adap);
- struct keywest_iface* iface = chan->iface;
- struct i2c_msg *pmsg;
- int i, completed;
- int rc = 0;
-
- if (iface->state == state_dead)
- return -ENXIO;
-
- if (pmac_low_i2c_lock(iface->node))
- return -ENXIO;
-
- /* Set adapter to standard mode */
- iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK;
- iface->cur_mode |= KW_I2C_MODE_STANDARD;
-
- completed = 0;
- for (i = 0; rc >= 0 && i < num;) {
- u8 addr;
-
- pmsg = &msgs[i++];
- addr = pmsg->addr;
- if (pmsg->flags & I2C_M_TEN) {
- printk(KERN_ERR "i2c-keywest: 10 bits addr not supported !\n");
- rc = -EINVAL;
- break;
- }
- pr_debug("xfer: chan: %d, doing %s %d bytes to 0x%02x - %d of %d messages\n",
- chan->chan_no,
- pmsg->flags & I2C_M_RD ? "read" : "write",
- pmsg->len, addr, i, num);
-
- /* Setup channel & clear pending irqs */
- write_reg(reg_mode, iface->cur_mode | (chan->chan_no << 4));
- write_reg(reg_isr, read_reg(reg_isr));
- write_reg(reg_status, 0);
-
- iface->data = pmsg->buf;
- iface->datalen = pmsg->len;
- iface->state = state_addr;
- iface->result = 0;
- if (pmsg->flags & I2C_M_RD)
- iface->read_write = I2C_SMBUS_READ;
- else
- iface->read_write = I2C_SMBUS_WRITE;
-
- /* Set up address and r/w bit */
- if (pmsg->flags & I2C_M_REV_DIR_ADDR)
- addr ^= 1;
- write_reg(reg_addr,
- (addr << 1) |
- ((iface->read_write == I2C_SMBUS_READ) ? 0x01 : 0x00));
-
-#ifndef POLLED_MODE
- /* Arm timeout */
- iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
- add_timer(&iface->timeout_timer);
-#endif
-
- /* Start sending address & enable interrupt*/
- write_reg(reg_ier, KW_I2C_IRQ_MASK);
- write_reg(reg_control, KW_I2C_CTL_XADDR);
-
-#ifdef POLLED_MODE
- pr_debug("using polled mode...\n");
- /* State machine, to turn into an interrupt handler */
- while(iface->state != state_idle) {
- u8 isr = wait_interrupt(iface);
- handle_interrupt(iface, isr);
- }
-#else /* POLLED_MODE */
- pr_debug("using interrupt mode...\n");
- wait_for_completion(&iface->complete);
-#endif /* POLLED_MODE */
-
- rc = iface->result;
- if (rc == 0)
- completed++;
- pr_debug("transfer done, result: %d\n", rc);
- }
-
- /* Release sem */
- pmac_low_i2c_unlock(iface->node);
-
- return completed;
-}
-
-static u32
-keywest_func(struct i2c_adapter * adapter)
-{
- return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
- I2C_FUNC_SMBUS_BLOCK_DATA;
-}
-
-/* For now, we only handle combined mode (smbus) */
-static struct i2c_algorithm keywest_algorithm = {
- .smbus_xfer = keywest_smbus_xfer,
- .master_xfer = keywest_xfer,
- .functionality = keywest_func,
-};
-
-
-static int
-create_iface(struct device_node *np, struct device *dev)
-{
- unsigned long steps;
- unsigned bsteps, tsize, i, nchan, addroffset;
- struct keywest_iface* iface;
- u32 *psteps, *prate;
- int rc;
-
- if (np->n_intrs < 1 || np->n_addrs < 1) {
- printk(KERN_ERR "%s: Missing interrupt or address !\n",
- np->full_name);
- return -ENODEV;
- }
- if (pmac_low_i2c_lock(np))
- return -ENODEV;
-
- psteps = (u32 *)get_property(np, "AAPL,address-step", NULL);
- steps = psteps ? (*psteps) : 0x10;
-
- /* Hrm... maybe we can be smarter here */
- for (bsteps = 0; (steps & 0x01) == 0; bsteps++)
- steps >>= 1;
-
- if (np->parent->name[0] == 'u') {
- nchan = 2;
- addroffset = 3;
- } else {
- addroffset = 0;
- nchan = 1;
- }
-
- tsize = sizeof(struct keywest_iface) +
- (sizeof(struct keywest_chan) + 4) * nchan;
- iface = kzalloc(tsize, GFP_KERNEL);
- if (iface == NULL) {
- printk(KERN_ERR "i2c-keywest: can't allocate inteface !\n");
- pmac_low_i2c_unlock(np);
- return -ENOMEM;
- }
- spin_lock_init(&iface->lock);
- init_completion(&iface->complete);
- iface->node = of_node_get(np);
- iface->bsteps = bsteps;
- iface->chan_count = nchan;
- iface->state = state_idle;
- iface->irq = np->intrs[0].line;
- iface->channels = (struct keywest_chan *)
- (((unsigned long)(iface + 1) + 3UL) & ~3UL);
- iface->base = ioremap(np->addrs[0].address + addroffset,
- np->addrs[0].size);
- if (!iface->base) {
- printk(KERN_ERR "i2c-keywest: can't map inteface !\n");
- kfree(iface);
- pmac_low_i2c_unlock(np);
- return -ENOMEM;
- }
-
-#ifndef POLLED_MODE
- init_timer(&iface->timeout_timer);
- iface->timeout_timer.function = keywest_timeout;
- iface->timeout_timer.data = (unsigned long)iface;
-#endif
-
- /* Select interface rate */
- iface->cur_mode = KW_I2C_MODE_100KHZ;
- prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL);
- if (prate) switch(*prate) {
- case 100:
- iface->cur_mode = KW_I2C_MODE_100KHZ;
- break;
- case 50:
- iface->cur_mode = KW_I2C_MODE_50KHZ;
- break;
- case 25:
- iface->cur_mode = KW_I2C_MODE_25KHZ;
- break;
- default:
- printk(KERN_WARNING "i2c-keywest: unknown rate %ldKhz, using 100KHz\n",
- (long)*prate);
- }
-
- /* Select standard mode by default */
- iface->cur_mode |= KW_I2C_MODE_STANDARD;
-
- /* Write mode */
- write_reg(reg_mode, iface->cur_mode);
-
- /* Switch interrupts off & clear them*/
- write_reg(reg_ier, 0x00);
- write_reg(reg_isr, KW_I2C_IRQ_MASK);
-
-#ifndef POLLED_MODE
- /* Request chip interrupt */
- rc = request_irq(iface->irq, keywest_irq, SA_INTERRUPT, "keywest i2c", iface);
- if (rc) {
- printk(KERN_ERR "i2c-keywest: can't get IRQ %d !\n", iface->irq);
- iounmap(iface->base);
- kfree(iface);
- pmac_low_i2c_unlock(np);
- return -ENODEV;
- }
-#endif /* POLLED_MODE */
-
- pmac_low_i2c_unlock(np);
- dev_set_drvdata(dev, iface);
-
- for (i=0; i<nchan; i++) {
- struct keywest_chan* chan = &iface->channels[i];
-
- sprintf(chan->adapter.name, "%s %d", np->parent->name, i);
- chan->iface = iface;
- chan->chan_no = i;
- chan->adapter.algo = &keywest_algorithm;
- chan->adapter.algo_data = NULL;
- chan->adapter.client_register = NULL;
- chan->adapter.client_unregister = NULL;
- i2c_set_adapdata(&chan->adapter, chan);
- chan->adapter.dev.parent = dev;
-
- rc = i2c_add_adapter(&chan->adapter);
- if (rc) {
- printk("i2c-keywest.c: Adapter %s registration failed\n",
- chan->adapter.name);
- i2c_set_adapdata(&chan->adapter, NULL);
- }
- }
-
- printk(KERN_INFO "Found KeyWest i2c on \"%s\", %d channel%s, stepping: %d bits\n",
- np->parent->name, nchan, nchan > 1 ? "s" : "", bsteps);
-
- return 0;
-}
-
-static int
-dispose_iface(struct device *dev)
-{
- struct keywest_iface *iface = dev_get_drvdata(dev);
- int i, rc;
-
- /* Make sure we stop all activity */
- if (pmac_low_i2c_lock(iface->node))
- return -ENODEV;
-
-#ifndef POLLED_MODE
- spin_lock_irq(&iface->lock);
- while (iface->state != state_idle) {
- spin_unlock_irq(&iface->lock);
- msleep(100);
- spin_lock_irq(&iface->lock);
- }
-#endif /* POLLED_MODE */
- iface->state = state_dead;
-#ifndef POLLED_MODE
- spin_unlock_irq(&iface->lock);
- free_irq(iface->irq, iface);
-#endif /* POLLED_MODE */
-
- pmac_low_i2c_unlock(iface->node);
-
- /* Release all channels */
- for (i=0; i<iface->chan_count; i++) {
- struct keywest_chan* chan = &iface->channels[i];
- if (i2c_get_adapdata(&chan->adapter) == NULL)
- continue;
- rc = i2c_del_adapter(&chan->adapter);
- i2c_set_adapdata(&chan->adapter, NULL);
- /* We aren't that prepared to deal with this... */
- if (rc)
- printk("i2c-keywest.c: i2c_del_adapter failed, that's bad !\n");
- }
- iounmap(iface->base);
- dev_set_drvdata(dev, NULL);
- of_node_put(iface->node);
- kfree(iface);
-
- return 0;
-}
-
-static int
-create_iface_macio(struct macio_dev* dev, const struct of_device_id *match)
-{
- return create_iface(dev->ofdev.node, &dev->ofdev.dev);
-}
-
-static int
-dispose_iface_macio(struct macio_dev* dev)
-{
- return dispose_iface(&dev->ofdev.dev);
-}
-
-static int
-create_iface_of_platform(struct of_device* dev, const struct of_device_id *match)
-{
- return create_iface(dev->node, &dev->dev);
-}
-
-static int
-dispose_iface_of_platform(struct of_device* dev)
-{
- return dispose_iface(&dev->dev);
-}
-
-static struct of_device_id i2c_keywest_match[] =
-{
- {
- .type = "i2c",
- .compatible = "keywest"
- },
- {},
-};
-
-static struct macio_driver i2c_keywest_macio_driver =
-{
- .owner = THIS_MODULE,
- .name = "i2c-keywest",
- .match_table = i2c_keywest_match,
- .probe = create_iface_macio,
- .remove = dispose_iface_macio
-};
-
-static struct of_platform_driver i2c_keywest_of_platform_driver =
-{
- .owner = THIS_MODULE,
- .name = "i2c-keywest",
- .match_table = i2c_keywest_match,
- .probe = create_iface_of_platform,
- .remove = dispose_iface_of_platform
-};
-
-static int __init
-i2c_keywest_init(void)
-{
- of_register_driver(&i2c_keywest_of_platform_driver);
- macio_register_driver(&i2c_keywest_macio_driver);
-
- return 0;
-}
-
-static void __exit
-i2c_keywest_cleanup(void)
-{
- of_unregister_driver(&i2c_keywest_of_platform_driver);
- macio_unregister_driver(&i2c_keywest_macio_driver);
-}
-
-module_init(i2c_keywest_init);
-module_exit(i2c_keywest_cleanup);
diff --git a/drivers/i2c/busses/i2c-keywest.h b/drivers/i2c/busses/i2c-keywest.h
deleted file mode 100644
index c5022e1ca6ff..000000000000
--- a/drivers/i2c/busses/i2c-keywest.h
+++ /dev/null
@@ -1,108 +0,0 @@
-#ifndef __I2C_KEYWEST_H__
-#define __I2C_KEYWEST_H__
-
-/* The Tumbler audio equalizer can be really slow sometimes */
-#define POLL_TIMEOUT (2*HZ)
-
-/* Register indices */
-typedef enum {
- reg_mode = 0,
- reg_control,
- reg_status,
- reg_isr,
- reg_ier,
- reg_addr,
- reg_subaddr,
- reg_data
-} reg_t;
-
-
-/* Mode register */
-#define KW_I2C_MODE_100KHZ 0x00
-#define KW_I2C_MODE_50KHZ 0x01
-#define KW_I2C_MODE_25KHZ 0x02
-#define KW_I2C_MODE_DUMB 0x00
-#define KW_I2C_MODE_STANDARD 0x04
-#define KW_I2C_MODE_STANDARDSUB 0x08
-#define KW_I2C_MODE_COMBINED 0x0C
-#define KW_I2C_MODE_MODE_MASK 0x0C
-#define KW_I2C_MODE_CHAN_MASK 0xF0
-
-/* Control register */
-#define KW_I2C_CTL_AAK 0x01
-#define KW_I2C_CTL_XADDR 0x02
-#define KW_I2C_CTL_STOP 0x04
-#define KW_I2C_CTL_START 0x08
-
-/* Status register */
-#define KW_I2C_STAT_BUSY 0x01
-#define KW_I2C_STAT_LAST_AAK 0x02
-#define KW_I2C_STAT_LAST_RW 0x04
-#define KW_I2C_STAT_SDA 0x08
-#define KW_I2C_STAT_SCL 0x10
-
-/* IER & ISR registers */
-#define KW_I2C_IRQ_DATA 0x01
-#define KW_I2C_IRQ_ADDR 0x02
-#define KW_I2C_IRQ_STOP 0x04
-#define KW_I2C_IRQ_START 0x08
-#define KW_I2C_IRQ_MASK 0x0F
-
-/* Physical interface */
-struct keywest_iface
-{
- struct device_node *node;
- void __iomem * base;
- unsigned bsteps;
- int irq;
- spinlock_t lock;
- struct keywest_chan *channels;
- unsigned chan_count;
- u8 cur_mode;
- char read_write;
- u8 *data;
- unsigned datalen;
- int state;
- int result;
- struct timer_list timeout_timer;
- struct completion complete;
-};
-
-enum {
- state_idle,
- state_addr,
- state_read,
- state_write,
- state_stop,
- state_dead
-};
-
-/* Channel on an interface */
-struct keywest_chan
-{
- struct i2c_adapter adapter;
- struct keywest_iface* iface;
- unsigned chan_no;
-};
-
-/* Register access */
-
-static inline u8 __read_reg(struct keywest_iface *iface, reg_t reg)
-{
- return in_8(iface->base
- + (((unsigned)reg) << iface->bsteps));
-}
-
-static inline void __write_reg(struct keywest_iface *iface, reg_t reg, u8 val)
-{
- out_8(iface->base
- + (((unsigned)reg) << iface->bsteps), val);
- (void)__read_reg(iface, reg_subaddr);
-}
-
-#define write_reg(reg, val) __write_reg(iface, reg, val)
-#define read_reg(reg) __read_reg(iface, reg)
-
-
-
-#endif /* __I2C_KEYWEST_H__ */
diff --git a/drivers/i2c/busses/i2c-pmac-smu.c b/drivers/i2c/busses/i2c-pmac-smu.c
deleted file mode 100644
index bfefe7f7a53d..000000000000
--- a/drivers/i2c/busses/i2c-pmac-smu.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- i2c Support for Apple SMU Controller
-
- Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp.
- <benh@kernel.crashing.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/completion.h>
-#include <linux/device.h>
-#include <asm/prom.h>
-#include <asm/of_device.h>
-#include <asm/smu.h>
-
-static int probe;
-
-MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
-MODULE_DESCRIPTION("I2C driver for Apple's SMU");
-MODULE_LICENSE("GPL");
-module_param(probe, bool, 0);
-
-
-/* Physical interface */
-struct smu_iface
-{
- struct i2c_adapter adapter;
- struct completion complete;
- u32 busid;
-};
-
-static void smu_i2c_done(struct smu_i2c_cmd *cmd, void *misc)
-{
- struct smu_iface *iface = misc;
- complete(&iface->complete);
-}
-
-/*
- * SMBUS-type transfer entrypoint
- */
-static s32 smu_smbus_xfer( struct i2c_adapter* adap,
- u16 addr,
- unsigned short flags,
- char read_write,
- u8 command,
- int size,
- union i2c_smbus_data* data)
-{
- struct smu_iface *iface = i2c_get_adapdata(adap);
- struct smu_i2c_cmd cmd;
- int rc = 0;
- int read = (read_write == I2C_SMBUS_READ);
-
- cmd.info.bus = iface->busid;
- cmd.info.devaddr = (addr << 1) | (read ? 0x01 : 0x00);
-
- /* Prepare datas & select mode */
- switch (size) {
- case I2C_SMBUS_QUICK:
- cmd.info.type = SMU_I2C_TRANSFER_SIMPLE;
- cmd.info.datalen = 0;
- break;
- case I2C_SMBUS_BYTE:
- cmd.info.type = SMU_I2C_TRANSFER_SIMPLE;
- cmd.info.datalen = 1;
- if (!read)
- cmd.info.data[0] = data->byte;
- break;
- case I2C_SMBUS_BYTE_DATA:
- cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
- cmd.info.datalen = 1;
- cmd.info.sublen = 1;
- cmd.info.subaddr[0] = command;
- cmd.info.subaddr[1] = 0;
- cmd.info.subaddr[2] = 0;
- if (!read)
- cmd.info.data[0] = data->byte;
- break;
- case I2C_SMBUS_WORD_DATA:
- cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
- cmd.info.datalen = 2;
- cmd.info.sublen = 1;
- cmd.info.subaddr[0] = command;
- cmd.info.subaddr[1] = 0;
- cmd.info.subaddr[2] = 0;
- if (!read) {
- cmd.info.data[0] = data->byte & 0xff;
- cmd.info.data[1] = (data->byte >> 8) & 0xff;
- }
- break;
- /* Note that these are broken vs. the expected smbus API where
- * on reads, the lenght is actually returned from the function,
- * but I think the current API makes no sense and I don't want
- * any driver that I haven't verified for correctness to go
- * anywhere near a pmac i2c bus anyway ...
- */
- case I2C_SMBUS_BLOCK_DATA:
- cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
- cmd.info.datalen = data->block[0] + 1;
- if (cmd.info.datalen > 6)
- return -EINVAL;
- if (!read)
- memcpy(cmd.info.data, data->block, cmd.info.datalen);
- cmd.info.sublen = 1;
- cmd.info.subaddr[0] = command;
- cmd.info.subaddr[1] = 0;
- cmd.info.subaddr[2] = 0;
- break;
- case I2C_SMBUS_I2C_BLOCK_DATA:
- cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
- cmd.info.datalen = data->block[0];
- if (cmd.info.datalen > 7)
- return -EINVAL;
- if (!read)
- memcpy(cmd.info.data, &data->block[1],
- cmd.info.datalen);
- cmd.info.sublen = 1;
- cmd.info.subaddr[0] = command;
- cmd.info.subaddr[1] = 0;
- cmd.info.subaddr[2] = 0;
- break;
-
- default:
- return -EINVAL;
- }
-
- /* Turn a standardsub read into a combined mode access */
- if (read_write == I2C_SMBUS_READ &&
- cmd.info.type == SMU_I2C_TRANSFER_STDSUB)
- cmd.info.type = SMU_I2C_TRANSFER_COMBINED;
-
- /* Finish filling command and submit it */
- cmd.done = smu_i2c_done;
- cmd.misc = iface;
- rc = smu_queue_i2c(&cmd);
- if (rc < 0)
- return rc;
- wait_for_completion(&iface->complete);
- rc = cmd.status;
-
- if (!read || rc < 0)
- return rc;
-
- switch (size) {
- case I2C_SMBUS_BYTE:
- case I2C_SMBUS_BYTE_DATA:
- data->byte = cmd.info.data[0];
- break;
- case I2C_SMBUS_WORD_DATA:
- data->word = ((u16)cmd.info.data[1]) << 8;
- data->word |= cmd.info.data[0];
- break;
- /* Note that these are broken vs. the expected smbus API where
- * on reads, the lenght is actually returned from the function,
- * but I think the current API makes no sense and I don't want
- * any driver that I haven't verified for correctness to go
- * anywhere near a pmac i2c bus anyway ...
- */
- case I2C_SMBUS_BLOCK_DATA:
- case I2C_SMBUS_I2C_BLOCK_DATA:
- memcpy(&data->block[0], cmd.info.data, cmd.info.datalen);
- break;
- }
-
- return rc;
-}
-
-static u32
-smu_smbus_func(struct i2c_adapter * adapter)
-{
- return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
- I2C_FUNC_SMBUS_BLOCK_DATA;
-}
-
-/* For now, we only handle combined mode (smbus) */
-static struct i2c_algorithm smu_algorithm = {
- .smbus_xfer = smu_smbus_xfer,
- .functionality = smu_smbus_func,
-};
-
-static int create_iface(struct device_node *np, struct device *dev)
-{
- struct smu_iface* iface;
- u32 *reg, busid;
- int rc;
-
- reg = (u32 *)get_property(np, "reg", NULL);
- if (reg == NULL) {
- printk(KERN_ERR "i2c-pmac-smu: can't find bus number !\n");
- return -ENXIO;
- }
- busid = *reg;
-
- iface = kzalloc(sizeof(struct smu_iface), GFP_KERNEL);
- if (iface == NULL) {
- printk(KERN_ERR "i2c-pmac-smu: can't allocate inteface !\n");
- return -ENOMEM;
- }
- init_completion(&iface->complete);
- iface->busid = busid;
-
- dev_set_drvdata(dev, iface);
-
- sprintf(iface->adapter.name, "smu-i2c-%02x", busid);
- iface->adapter.algo = &smu_algorithm;
- iface->adapter.algo_data = NULL;
- iface->adapter.client_register = NULL;
- iface->adapter.client_unregister = NULL;
- i2c_set_adapdata(&iface->adapter, iface);
- iface->adapter.dev.parent = dev;
-
- rc = i2c_add_adapter(&iface->adapter);
- if (rc) {
- printk(KERN_ERR "i2c-pamc-smu.c: Adapter %s registration "
- "failed\n", iface->adapter.name);
- i2c_set_adapdata(&iface->adapter, NULL);
- }
-
- if (probe) {
- unsigned char addr;
- printk("Probe: ");
- for (addr = 0x00; addr <= 0x7f; addr++) {
- if (i2c_smbus_xfer(&iface->adapter,addr,
- 0,0,0,I2C_SMBUS_QUICK,NULL) >= 0)
- printk("%02x ", addr);
- }
- printk("\n");
- }
-
- printk(KERN_INFO "SMU i2c bus %x registered\n", busid);
-
- return 0;
-}
-
-static int dispose_iface(struct device *dev)
-{
- struct smu_iface *iface = dev_get_drvdata(dev);
- int rc;
-
- rc = i2c_del_adapter(&iface->adapter);
- i2c_set_adapdata(&iface->adapter, NULL);
- /* We aren't that prepared to deal with this... */
- if (rc)
- printk("i2c-pmac-smu.c: Failed to remove bus %s !\n",
- iface->adapter.name);
- dev_set_drvdata(dev, NULL);
- kfree(iface);
-
- return 0;
-}
-
-
-static int create_iface_of_platform(struct of_device* dev,
- const struct of_device_id *match)
-{
- return create_iface(dev->node, &dev->dev);
-}
-
-
-static int dispose_iface_of_platform(struct of_device* dev)
-{
- return dispose_iface(&dev->dev);
-}
-
-
-static struct of_device_id i2c_smu_match[] =
-{
- {
- .compatible = "smu-i2c",
- },
- {},
-};
-static struct of_platform_driver i2c_smu_of_platform_driver =
-{
- .name = "i2c-smu",
- .match_table = i2c_smu_match,
- .probe = create_iface_of_platform,
- .remove = dispose_iface_of_platform
-};
-
-
-static int __init i2c_pmac_smu_init(void)
-{
- of_register_driver(&i2c_smu_of_platform_driver);
- return 0;
-}
-
-
-static void __exit i2c_pmac_smu_cleanup(void)
-{
- of_unregister_driver(&i2c_smu_of_platform_driver);
-}
-
-module_init(i2c_pmac_smu_init);
-module_exit(i2c_pmac_smu_cleanup);
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
new file mode 100644
index 000000000000..df786eb55295
--- /dev/null
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -0,0 +1,290 @@
+/*
+ i2c Support for Apple SMU Controller
+
+ Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp.
+ <benh@kernel.crashing.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/prom.h>
+#include <asm/pmac_low_i2c.h>
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("I2C driver for Apple PowerMac");
+MODULE_LICENSE("GPL");
+
+/*
+ * SMBUS-type transfer entrypoint
+ */
+static s32 i2c_powermac_smbus_xfer( struct i2c_adapter* adap,
+ u16 addr,
+ unsigned short flags,
+ char read_write,
+ u8 command,
+ int size,
+ union i2c_smbus_data* data)
+{
+ struct pmac_i2c_bus *bus = i2c_get_adapdata(adap);
+ int rc = 0;
+ int read = (read_write == I2C_SMBUS_READ);
+ int addrdir = (addr << 1) | read;
+ u8 local[2];
+
+ rc = pmac_i2c_open(bus, 0);
+ if (rc)
+ return rc;
+
+ switch (size) {
+ case I2C_SMBUS_QUICK:
+ rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
+ if (rc)
+ goto bail;
+ rc = pmac_i2c_xfer(bus, addrdir, 0, 0, NULL, 0);
+ break;
+ case I2C_SMBUS_BYTE:
+ rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
+ if (rc)
+ goto bail;
+ rc = pmac_i2c_xfer(bus, addrdir, 0, 0, &data->byte, 1);
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ rc = pmac_i2c_setmode(bus, read ?
+ pmac_i2c_mode_combined :
+ pmac_i2c_mode_stdsub);
+ if (rc)
+ goto bail;
+ rc = pmac_i2c_xfer(bus, addrdir, 1, command, &data->byte, 1);
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ rc = pmac_i2c_setmode(bus, read ?
+ pmac_i2c_mode_combined :
+ pmac_i2c_mode_stdsub);
+ if (rc)
+ goto bail;
+ if (!read) {
+ local[0] = data->word & 0xff;
+ local[1] = (data->word >> 8) & 0xff;
+ }
+ rc = pmac_i2c_xfer(bus, addrdir, 1, command, local, 2);
+ if (rc == 0 && read) {
+ data->word = ((u16)local[1]) << 8;
+ data->word |= local[0];
+ }
+ break;
+
+ /* Note that these are broken vs. the expected smbus API where
+ * on reads, the lenght is actually returned from the function,
+ * but I think the current API makes no sense and I don't want
+ * any driver that I haven't verified for correctness to go
+ * anywhere near a pmac i2c bus anyway ...
+ *
+ * I'm also not completely sure what kind of phases to do between
+ * the actual command and the data (what I am _supposed_ to do that
+ * is). For now, I assume writes are a single stream and reads have
+ * a repeat start/addr phase (but not stop in between)
+ */
+ case I2C_SMBUS_BLOCK_DATA:
+ rc = pmac_i2c_setmode(bus, read ?
+ pmac_i2c_mode_combined :
+ pmac_i2c_mode_stdsub);
+ if (rc)
+ goto bail;
+ rc = pmac_i2c_xfer(bus, addrdir, 1, command, data->block,
+ data->block[0] + 1);
+
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ rc = pmac_i2c_setmode(bus, read ?
+ pmac_i2c_mode_combined :
+ pmac_i2c_mode_stdsub);
+ if (rc)
+ goto bail;
+ rc = pmac_i2c_xfer(bus, addrdir, 1, command,
+ read ? data->block : &data->block[1],
+ data->block[0]);
+ break;
+
+ default:
+ rc = -EINVAL;
+ }
+ bail:
+ pmac_i2c_close(bus);
+ return rc;
+}
+
+/*
+ * Generic i2c master transfer entrypoint. This driver only support single
+ * messages (for "lame i2c" transfers). Anything else should use the smbus
+ * entry point
+ */
+static int i2c_powermac_master_xfer( struct i2c_adapter *adap,
+ struct i2c_msg *msgs,
+ int num)
+{
+ struct pmac_i2c_bus *bus = i2c_get_adapdata(adap);
+ int rc = 0;
+ int read;
+ int addrdir;
+
+ if (num != 1)
+ return -EINVAL;
+ if (msgs->flags & I2C_M_TEN)
+ return -EINVAL;
+ read = (msgs->flags & I2C_M_RD) != 0;
+ addrdir = (msgs->addr << 1) | read;
+ if (msgs->flags & I2C_M_REV_DIR_ADDR)
+ addrdir ^= 1;
+
+ rc = pmac_i2c_open(bus, 0);
+ if (rc)
+ return rc;
+ rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
+ if (rc)
+ goto bail;
+ rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
+ bail:
+ pmac_i2c_close(bus);
+ return rc < 0 ? rc : msgs->len;
+}
+
+static u32 i2c_powermac_func(struct i2c_adapter * adapter)
+{
+ return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_I2C;
+}
+
+/* For now, we only handle smbus */
+static struct i2c_algorithm i2c_powermac_algorithm = {
+ .smbus_xfer = i2c_powermac_smbus_xfer,
+ .master_xfer = i2c_powermac_master_xfer,
+ .functionality = i2c_powermac_func,
+};
+
+
+static int i2c_powermac_remove(struct device *dev)
+{
+ struct i2c_adapter *adapter = dev_get_drvdata(dev);
+ struct pmac_i2c_bus *bus = i2c_get_adapdata(adapter);
+ int rc;
+
+ rc = i2c_del_adapter(adapter);
+ pmac_i2c_detach_adapter(bus, adapter);
+ i2c_set_adapdata(adapter, NULL);
+ /* We aren't that prepared to deal with this... */
+ if (rc)
+ printk("i2c-powermac.c: Failed to remove bus %s !\n",
+ adapter->name);
+ dev_set_drvdata(dev, NULL);
+ kfree(adapter);
+
+ return 0;
+}
+
+
+static int i2c_powermac_probe(struct device *dev)
+{
+ struct pmac_i2c_bus *bus = dev->platform_data;
+ struct device_node *parent = NULL;
+ struct i2c_adapter *adapter;
+ char name[32], *basename;
+ int rc;
+
+ if (bus == NULL)
+ return -EINVAL;
+
+ /* Ok, now we need to make up a name for the interface that will
+ * match what we used to do in the past, that is basically the
+ * controller's parent device node for keywest. PMU didn't have a
+ * naming convention and SMU has a different one
+ */
+ switch(pmac_i2c_get_type(bus)) {
+ case pmac_i2c_bus_keywest:
+ parent = of_get_parent(pmac_i2c_get_controller(bus));
+ if (parent == NULL)
+ return -EINVAL;
+ basename = parent->name;
+ break;
+ case pmac_i2c_bus_pmu:
+ basename = "pmu";
+ break;
+ case pmac_i2c_bus_smu:
+ /* This is not what we used to do but I'm fixing drivers at
+ * the same time as this change
+ */
+ basename = "smu";
+ break;
+ default:
+ return -EINVAL;
+ }
+ snprintf(name, 32, "%s %d", basename, pmac_i2c_get_channel(bus));
+ of_node_put(parent);
+
+ adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
+ if (adapter == NULL) {
+ printk(KERN_ERR "i2c-powermac: can't allocate inteface !\n");
+ return -ENOMEM;
+ }
+ dev_set_drvdata(dev, adapter);
+ strcpy(adapter->name, name);
+ adapter->algo = &i2c_powermac_algorithm;
+ i2c_set_adapdata(adapter, bus);
+ adapter->dev.parent = dev;
+ pmac_i2c_attach_adapter(bus, adapter);
+ rc = i2c_add_adapter(adapter);
+ if (rc) {
+ printk(KERN_ERR "i2c-powermac: Adapter %s registration "
+ "failed\n", name);
+ i2c_set_adapdata(adapter, NULL);
+ pmac_i2c_detach_adapter(bus, adapter);
+ }
+
+ printk(KERN_INFO "PowerMac i2c bus %s registered\n", name);
+ return rc;
+}
+
+
+static struct device_driver i2c_powermac_driver = {
+ .name = "i2c-powermac",
+ .bus = &platform_bus_type,
+ .probe = i2c_powermac_probe,
+ .remove = i2c_powermac_remove,
+};
+
+static int __init i2c_powermac_init(void)
+{
+ driver_register(&i2c_powermac_driver);
+ return 0;
+}
+
+
+static void __exit i2c_powermac_cleanup(void)
+{
+ driver_unregister(&i2c_powermac_driver);
+}
+
+module_init(i2c_powermac_init);
+module_exit(i2c_powermac_cleanup);
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 16b28357885b..5013b1285e22 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1271,7 +1271,7 @@ static int
pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
{
struct device_node *np = pmif->node;
- int *bidp, i;
+ int *bidp;
pmif->cable_80 = 0;
pmif->broken_dma = pmif->broken_dma_warn = 0;
@@ -1430,7 +1430,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
pmif = &pmac_ide[i];
hwif = &ide_hwifs[i];
- if (mdev->ofdev.node->n_addrs == 0) {
+ if (macio_resource_count(mdev) == 0) {
printk(KERN_WARNING "ide%d: no address for %s\n",
i, mdev->ofdev.node->full_name);
return -ENXIO;
@@ -1686,7 +1686,7 @@ pmac_ide_probe(void)
#else
macio_register_driver(&pmac_ide_macio_driver);
pci_register_driver(&pmac_ide_pci_driver);
-#endif
+#endif
}
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index a0ea44c3e8b1..7d4a0ac28c06 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -149,14 +149,14 @@ config MAC_EMUMOUSEBTN
config THERM_WINDTUNNEL
tristate "Support for thermal management on Windtunnel G4s"
- depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
+ depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
help
This driver provides some thermostat and fan control for the desktop
G4 "Windtunnel"
config THERM_ADT746X
tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
- depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
+ depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
help
This driver provides some thermostat and fan control for the
iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty
@@ -164,7 +164,7 @@ config THERM_ADT746X
config THERM_PM72
tristate "Support for thermal management on PowerMac G5"
- depends on I2C && I2C_KEYWEST && PPC_PMAC64
+ depends on I2C && I2C_POWERMAC && PPC_PMAC64
help
This driver provides thermostat and fan control for the desktop
G5 machines.
@@ -175,14 +175,14 @@ config WINDFARM
config WINDFARM_PM81
tristate "Support for thermal management on iMac G5"
depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
- select I2C_PMAC_SMU
+ select I2C_POWERMAC
help
This driver provides thermal control for the iMacG5
config WINDFARM_PM91
tristate "Support for thermal management on PowerMac9,1"
depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
- select I2C_PMAC_SMU
+ select I2C_POWERMAC
help
This driver provides thermal control for the PowerMac9,1
which is the recent (SMU based) single CPU desktop G5
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index 228e1852a836..2a545ceb523b 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -3,6 +3,13 @@
* a MacIO ASIC. Interface to new driver model mostly
* stolen from the PCI version.
*
+ * Copyright (C) 2005 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
* TODO:
*
* - Don't probe below media bay by default, but instead provide
@@ -218,12 +225,14 @@ postcore_initcall(macio_bus_driver_init);
/**
- * macio_release_dev - free a macio device structure when all users of it are finished.
+ * macio_release_dev - free a macio device structure when all users of it are
+ * finished.
* @dev: device that's been disconnected
*
- * Will be called only by the device core when all users of this macio device are
- * done. This currently means never as we don't hot remove any macio device yet,
- * though that will happen with mediabay based devices in a later implementation.
+ * Will be called only by the device core when all users of this macio device
+ * are done. This currently means never as we don't hot remove any macio
+ * device yet, though that will happen with mediabay based devices in a later
+ * implementation.
*/
static void macio_release_dev(struct device *dev)
{
@@ -242,49 +251,114 @@ static void macio_release_dev(struct device *dev)
* If this routine returns non-null, then the resource is completely
* skipped.
*/
-static int macio_resource_quirks(struct device_node *np, struct resource *res, int index)
+static int macio_resource_quirks(struct device_node *np, struct resource *res,
+ int index)
{
if (res->flags & IORESOURCE_MEM) {
/* Grand Central has too large resource 0 on some machines */
- if (index == 0 && !strcmp(np->name, "gc")) {
- np->addrs[0].size = 0x20000;
+ if (index == 0 && !strcmp(np->name, "gc"))
res->end = res->start + 0x1ffff;
- }
+
/* Airport has bogus resource 2 */
if (index >= 2 && !strcmp(np->name, "radio"))
return 1;
+
+#ifndef CONFIG_PPC64
/* DBDMAs may have bogus sizes */
- if ((res->start & 0x0001f000) == 0x00008000) {
- np->addrs[index].size = 0x100;
+ if ((res->start & 0x0001f000) == 0x00008000)
res->end = res->start + 0xff;
- }
- /* ESCC parent eats child resources. We could have added a level of hierarchy,
- * but I don't really feel the need for it */
+#endif /* CONFIG_PPC64 */
+
+ /* ESCC parent eats child resources. We could have added a
+ * level of hierarchy, but I don't really feel the need
+ * for it
+ */
if (!strcmp(np->name, "escc"))
return 1;
+
/* ESCC has bogus resources >= 3 */
- if (index >= 3 && !(strcmp(np->name, "ch-a") && strcmp(np->name, "ch-b")))
+ if (index >= 3 && !(strcmp(np->name, "ch-a") &&
+ strcmp(np->name, "ch-b")))
return 1;
+
/* Media bay has too many resources, keep only first one */
if (index > 0 && !strcmp(np->name, "media-bay"))
return 1;
+
/* Some older IDE resources have bogus sizes */
if (!(strcmp(np->name, "IDE") && strcmp(np->name, "ATA") &&
strcmp(np->type, "ide") && strcmp(np->type, "ata"))) {
- if (index == 0 && np->addrs[0].size > 0x1000) {
- np->addrs[0].size = 0x1000;
+ if (index == 0 && (res->end - res->start) > 0xfff)
res->end = res->start + 0xfff;
- }
- if (index == 1 && np->addrs[1].size > 0x100) {
- np->addrs[1].size = 0x100;
+ if (index == 1 && (res->end - res->start) > 0xff)
res->end = res->start + 0xff;
- }
}
}
return 0;
}
+static void macio_setup_interrupts(struct macio_dev *dev)
+{
+ struct device_node *np = dev->ofdev.node;
+ int i,j;
+
+ /* For now, we use pre-parsed entries in the device-tree for
+ * interrupt routing and addresses, but we should change that
+ * to dynamically parsed entries and so get rid of most of the
+ * clutter in struct device_node
+ */
+ for (i = j = 0; i < np->n_intrs; i++) {
+ struct resource *res = &dev->interrupt[j];
+
+ if (j >= MACIO_DEV_COUNT_IRQS)
+ break;
+ res->start = np->intrs[i].line;
+ res->flags = IORESOURCE_IO;
+ if (np->intrs[j].sense)
+ res->flags |= IORESOURCE_IRQ_LOWLEVEL;
+ else
+ res->flags |= IORESOURCE_IRQ_HIGHEDGE;
+ res->name = dev->ofdev.dev.bus_id;
+ if (macio_resource_quirks(np, res, i))
+ memset(res, 0, sizeof(struct resource));
+ else
+ j++;
+ }
+ dev->n_interrupts = j;
+}
+
+static void macio_setup_resources(struct macio_dev *dev,
+ struct resource *parent_res)
+{
+ struct device_node *np = dev->ofdev.node;
+ struct resource r;
+ int index;
+
+ for (index = 0; of_address_to_resource(np, index, &r) == 0; index++) {
+ struct resource *res = &dev->resource[index];
+ if (index >= MACIO_DEV_COUNT_RESOURCES)
+ break;
+ *res = r;
+ res->name = dev->ofdev.dev.bus_id;
+
+ if (macio_resource_quirks(np, res, index)) {
+ memset(res, 0, sizeof(struct resource));
+ continue;
+ }
+ /* Currently, we consider failure as harmless, this may
+ * change in the future, once I've found all the device
+ * tree bugs in older machines & worked around them
+ */
+ if (insert_resource(parent_res, res)) {
+ printk(KERN_WARNING "Can't request resource "
+ "%d for MacIO device %s\n",
+ index, dev->ofdev.dev.bus_id);
+ }
+ }
+ dev->n_resources = index;
+}
+
/**
* macio_add_one_device - Add one device from OF node to the device tree
* @chip: pointer to the macio_chip holding the device
@@ -294,12 +368,13 @@ static int macio_resource_quirks(struct device_node *np, struct resource *res, i
* When media-bay is changed to hotswap drivers, this function will
* be exposed to the bay driver some way...
*/
-static struct macio_dev * macio_add_one_device(struct macio_chip *chip, struct device *parent,
- struct device_node *np, struct macio_dev *in_bay,
+static struct macio_dev * macio_add_one_device(struct macio_chip *chip,
+ struct device *parent,
+ struct device_node *np,
+ struct macio_dev *in_bay,
struct resource *parent_res)
{
struct macio_dev *dev;
- int i, j;
u32 *reg;
if (np == NULL)
@@ -326,7 +401,8 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip, struct d
/* MacIO itself has a different reg, we use it's PCI base */
if (np == chip->of_node) {
- sprintf(dev->ofdev.dev.bus_id, "%1d.%08lx:%.*s", chip->lbus.index,
+ sprintf(dev->ofdev.dev.bus_id, "%1d.%08lx:%.*s",
+ chip->lbus.index,
#ifdef CONFIG_PCI
pci_resource_start(chip->lbus.pdev, 0),
#else
@@ -335,57 +411,16 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip, struct d
MAX_NODE_NAME_SIZE, np->name);
} else {
reg = (u32 *)get_property(np, "reg", NULL);
- sprintf(dev->ofdev.dev.bus_id, "%1d.%08x:%.*s", chip->lbus.index,
+ sprintf(dev->ofdev.dev.bus_id, "%1d.%08x:%.*s",
+ chip->lbus.index,
reg ? *reg : 0, MAX_NODE_NAME_SIZE, np->name);
}
- /* For now, we use pre-parsed entries in the device-tree for
- * interrupt routing and addresses, but we should change that
- * to dynamically parsed entries and so get rid of most of the
- * clutter in struct device_node
- */
- for (i = j = 0; i < np->n_intrs; i++) {
- struct resource *res = &dev->interrupt[j];
-
- if (j >= MACIO_DEV_COUNT_IRQS)
- break;
- res->start = np->intrs[i].line;
- res->flags = IORESOURCE_IO;
- if (np->intrs[j].sense)
- res->flags |= IORESOURCE_IRQ_LOWLEVEL;
- else
- res->flags |= IORESOURCE_IRQ_HIGHEDGE;
- res->name = dev->ofdev.dev.bus_id;
- if (macio_resource_quirks(np, res, i))
- memset(res, 0, sizeof(struct resource));
- else
- j++;
- }
- dev->n_interrupts = j;
- for (i = j = 0; i < np->n_addrs; i++) {
- struct resource *res = &dev->resource[j];
-
- if (j >= MACIO_DEV_COUNT_RESOURCES)
- break;
- res->start = np->addrs[i].address;
- res->end = np->addrs[i].address + np->addrs[i].size - 1;
- res->flags = IORESOURCE_MEM;
- res->name = dev->ofdev.dev.bus_id;
- if (macio_resource_quirks(np, res, i))
- memset(res, 0, sizeof(struct resource));
- else {
- j++;
- /* Currently, we consider failure as harmless, this may
- * change in the future, once I've found all the device
- * tree bugs in older machines & worked around them
- */
- if (insert_resource(parent_res, res))
- printk(KERN_WARNING "Can't request resource %d for MacIO"
- " device %s\n", i, dev->ofdev.dev.bus_id);
- }
- }
- dev->n_resources = j;
+ /* Setup interrupts & resources */
+ macio_setup_interrupts(dev);
+ macio_setup_resources(dev, parent_res);
+ /* Register with core */
if (of_device_register(&dev->ofdev) != 0) {
printk(KERN_DEBUG"macio: device registration error for %s!\n",
dev->ofdev.dev.bus_id);
@@ -442,36 +477,42 @@ static void macio_pci_add_devices(struct macio_chip *chip)
/* First scan 1st level */
for (np = NULL; (np = of_get_next_child(pnode, np)) != NULL;) {
- if (!macio_skip_device(np)) {
- of_node_get(np);
- mdev = macio_add_one_device(chip, &rdev->ofdev.dev, np, NULL, root_res);
- if (mdev == NULL)
- of_node_put(np);
- else if (strncmp(np->name, "media-bay", 9) == 0)
- mbdev = mdev;
- else if (strncmp(np->name, "escc", 4) == 0)
- sdev = mdev;
- }
+ if (macio_skip_device(np))
+ continue;
+ of_node_get(np);
+ mdev = macio_add_one_device(chip, &rdev->ofdev.dev, np, NULL,
+ root_res);
+ if (mdev == NULL)
+ of_node_put(np);
+ else if (strncmp(np->name, "media-bay", 9) == 0)
+ mbdev = mdev;
+ else if (strncmp(np->name, "escc", 4) == 0)
+ sdev = mdev;
}
/* Add media bay devices if any */
if (mbdev)
- for (np = NULL; (np = of_get_next_child(mbdev->ofdev.node, np)) != NULL;)
- if (!macio_skip_device(np)) {
- of_node_get(np);
- if (macio_add_one_device(chip, &mbdev->ofdev.dev, np, mbdev,
- root_res) == NULL)
- of_node_put(np);
- }
+ for (np = NULL; (np = of_get_next_child(mbdev->ofdev.node, np))
+ != NULL;) {
+ if (macio_skip_device(np))
+ continue;
+ of_node_get(np);
+ if (macio_add_one_device(chip, &mbdev->ofdev.dev, np,
+ mbdev, root_res) == NULL)
+ of_node_put(np);
+ }
+
/* Add serial ports if any */
if (sdev) {
- for (np = NULL; (np = of_get_next_child(sdev->ofdev.node, np)) != NULL;)
- if (!macio_skip_device(np)) {
- of_node_get(np);
- if (macio_add_one_device(chip, &sdev->ofdev.dev, np, NULL,
- root_res) == NULL)
- of_node_put(np);
- }
+ for (np = NULL; (np = of_get_next_child(sdev->ofdev.node, np))
+ != NULL;) {
+ if (macio_skip_device(np))
+ continue;
+ of_node_get(np);
+ if (macio_add_one_device(chip, &sdev->ofdev.dev, np,
+ NULL, root_res) == NULL)
+ of_node_put(np);
+ }
}
}
@@ -519,7 +560,8 @@ void macio_unregister_driver(struct macio_driver *drv)
* Returns 0 on success, or %EBUSY on error. A warning
* message is also printed on failure.
*/
-int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name)
+int macio_request_resource(struct macio_dev *dev, int resource_no,
+ const char *name)
{
if (macio_resource_len(dev, resource_no) == 0)
return 0;
@@ -606,20 +648,20 @@ static int __devinit macio_pci_probe(struct pci_dev *pdev, const struct pci_devi
if (ent->vendor != PCI_VENDOR_ID_APPLE)
return -ENODEV;
- /* Note regarding refcounting: We assume pci_device_to_OF_node() is ported
- * to new OF APIs and returns a node with refcount incremented. This isn't
- * the case today, but on the other hand ppc32 doesn't do refcounting. This
- * will have to be fixed when going to ppc64. --BenH.
+ /* Note regarding refcounting: We assume pci_device_to_OF_node() is
+ * ported to new OF APIs and returns a node with refcount incremented.
*/
np = pci_device_to_OF_node(pdev);
if (np == NULL)
return -ENODEV;
- /* This assumption is wrong, fix that here for now until I fix the arch */
+ /* The above assumption is wrong !!!
+ * fix that here for now until I fix the arch code
+ */
of_node_get(np);
- /* We also assume that pmac_feature will have done a get() on nodes stored
- * in the macio chips array
+ /* We also assume that pmac_feature will have done a get() on nodes
+ * stored in the macio chips array
*/
chip = macio_find(np, macio_unknown);
of_node_put(np);
@@ -639,9 +681,9 @@ static int __devinit macio_pci_probe(struct pci_dev *pdev, const struct pci_devi
/*
* HACK ALERT: The WallStreet PowerBook and some OHare based machines
- * have 2 macio ASICs. I must probe the "main" one first or IDE ordering
- * will be incorrect. So I put on "hold" the second one since it seem to
- * appear first on PCI
+ * have 2 macio ASICs. I must probe the "main" one first or IDE
+ * ordering will be incorrect. So I put on "hold" the second one since
+ * it seem to appear first on PCI
*/
if (chip->type == macio_gatwick || chip->type == macio_ohareII)
if (macio_chips[0].lbus.pdev == NULL) {
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index b856bb67169c..8dbf2852bae0 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -647,6 +647,7 @@ static int __devinit media_bay_attach(struct macio_dev *mdev, const struct of_de
struct media_bay_info* bay;
u32 __iomem *regbase;
struct device_node *ofnode;
+ unsigned long base;
int i;
ofnode = mdev->ofdev.node;
@@ -656,10 +657,11 @@ static int __devinit media_bay_attach(struct macio_dev *mdev, const struct of_de
if (macio_request_resources(mdev, "media-bay"))
return -EBUSY;
/* Media bay registers are located at the beginning of the
- * mac-io chip, we get the parent address for now (hrm...)
+ * mac-io chip, for now, we trick and align down the first
+ * resource passed in
*/
- regbase = (u32 __iomem *)
- ioremap(ofnode->parent->addrs[0].address, 0x100);
+ base = macio_resource_start(mdev, 0) & 0xffff0000u;
+ regbase = (u32 __iomem *)ioremap(base, 0x100);
if (regbase == NULL) {
macio_release_resources(mdev);
return -ENOMEM;
diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index e8378274d710..db2ae71d07ef 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -53,7 +53,7 @@
#undef DEBUG_SMU
#ifdef DEBUG_SMU
-#define DPRINTK(fmt, args...) do { udbg_printf(KERN_DEBUG fmt , ##args); } while (0)
+#define DPRINTK(fmt, args...) do { printk(KERN_DEBUG fmt , ##args); } while (0)
#else
#define DPRINTK(fmt, args...) do { } while (0)
#endif
@@ -94,6 +94,8 @@ struct smu_device {
static struct smu_device *smu;
static DECLARE_MUTEX(smu_part_access);
+static void smu_i2c_retry(unsigned long data);
+
/*
* SMU driver low level stuff
*/
@@ -469,7 +471,6 @@ int __init smu_init (void)
smu->of_node = np;
smu->db_irq = NO_IRQ;
smu->msg_irq = NO_IRQ;
- init_timer(&smu->i2c_timer);
/* smu_cmdbuf_abs is in the low 2G of RAM, can be converted to a
* 32 bits value safely
@@ -544,6 +545,10 @@ static int smu_late_init(void)
if (!smu)
return 0;
+ init_timer(&smu->i2c_timer);
+ smu->i2c_timer.function = smu_i2c_retry;
+ smu->i2c_timer.data = (unsigned long)smu;
+
/*
* Try to request the interrupts
*/
@@ -570,7 +575,10 @@ static int smu_late_init(void)
return 0;
}
-arch_initcall(smu_late_init);
+/* This has to be before arch_initcall as the low i2c stuff relies on the
+ * above having been done before we reach arch_initcalls
+ */
+core_initcall(smu_late_init);
/*
* sysfs visibility
@@ -580,20 +588,10 @@ static void smu_expose_childs(void *unused)
{
struct device_node *np;
- for (np = NULL; (np = of_get_next_child(smu->of_node, np)) != NULL;) {
- if (device_is_compatible(np, "smu-i2c")) {
- char name[32];
- u32 *reg = (u32 *)get_property(np, "reg", NULL);
-
- if (reg == NULL)
- continue;
- sprintf(name, "smu-i2c-%02x", *reg);
- of_platform_device_create(np, name, &smu->of_dev->dev);
- }
+ for (np = NULL; (np = of_get_next_child(smu->of_node, np)) != NULL;)
if (device_is_compatible(np, "smu-sensors"))
- of_platform_device_create(np, "smu-sensors", &smu->of_dev->dev);
- }
-
+ of_platform_device_create(np, "smu-sensors",
+ &smu->of_dev->dev);
}
static DECLARE_WORK(smu_expose_childs_work, smu_expose_childs, NULL);
@@ -712,13 +710,13 @@ static void smu_i2c_complete_command(struct smu_i2c_cmd *cmd, int fail)
static void smu_i2c_retry(unsigned long data)
{
- struct smu_i2c_cmd *cmd = (struct smu_i2c_cmd *)data;
+ struct smu_i2c_cmd *cmd = smu->cmd_i2c_cur;
DPRINTK("SMU: i2c failure, requeuing...\n");
/* requeue command simply by resetting reply_len */
cmd->pdata[0] = 0xff;
- cmd->scmd.reply_len = 0x10;
+ cmd->scmd.reply_len = sizeof(cmd->pdata);
smu_queue_cmd(&cmd->scmd);
}
@@ -747,10 +745,8 @@ static void smu_i2c_low_completion(struct smu_cmd *scmd, void *misc)
*/
if (fail && --cmd->retries > 0) {
DPRINTK("SMU: i2c failure, starting timer...\n");
- smu->i2c_timer.function = smu_i2c_retry;
- smu->i2c_timer.data = (unsigned long)cmd;
- smu->i2c_timer.expires = jiffies + msecs_to_jiffies(5);
- add_timer(&smu->i2c_timer);
+ BUG_ON(cmd != smu->cmd_i2c_cur);
+ mod_timer(&smu->i2c_timer, jiffies + msecs_to_jiffies(5));
return;
}
@@ -764,7 +760,7 @@ static void smu_i2c_low_completion(struct smu_cmd *scmd, void *misc)
/* Ok, initial command complete, now poll status */
scmd->reply_buf = cmd->pdata;
- scmd->reply_len = 0x10;
+ scmd->reply_len = sizeof(cmd->pdata);
scmd->data_buf = cmd->pdata;
scmd->data_len = 1;
cmd->pdata[0] = 0;
@@ -786,7 +782,7 @@ int smu_queue_i2c(struct smu_i2c_cmd *cmd)
cmd->scmd.done = smu_i2c_low_completion;
cmd->scmd.misc = cmd;
cmd->scmd.reply_buf = cmd->pdata;
- cmd->scmd.reply_len = 0x10;
+ cmd->scmd.reply_len = sizeof(cmd->pdata);
cmd->scmd.data_buf = (u8 *)(char *)&cmd->info;
cmd->scmd.status = 1;
cmd->stage = 0;
@@ -909,10 +905,13 @@ static struct smu_sdbp_header *smu_create_sdb_partition(int id)
struct property *prop;
/* First query the partition info */
+ DPRINTK("SMU: Query partition infos ... (irq=%d)\n", smu->db_irq);
smu_queue_simple(&cmd, SMU_CMD_PARTITION_COMMAND, 2,
smu_done_complete, &comp,
SMU_CMD_PARTITION_LATEST, id);
wait_for_completion(&comp);
+ DPRINTK("SMU: done, status: %d, reply_len: %d\n",
+ cmd.cmd.status, cmd.cmd.reply_len);
/* Partition doesn't exist (or other error) */
if (cmd.cmd.status != 0 || cmd.cmd.reply_len != 6)
@@ -975,6 +974,8 @@ struct smu_sdbp_header *__smu_get_sdb_partition(int id, unsigned int *size,
sprintf(pname, "sdb-partition-%02x", id);
+ DPRINTK("smu_get_sdb_partition(%02x)\n", id);
+
if (interruptible) {
int rc;
rc = down_interruptible(&smu_part_access);
@@ -986,6 +987,7 @@ struct smu_sdbp_header *__smu_get_sdb_partition(int id, unsigned int *size,
part = (struct smu_sdbp_header *)get_property(smu->of_node,
pname, size);
if (part == NULL) {
+ DPRINTK("trying to extract from SMU ...\n");
part = smu_create_sdb_partition(id);
if (part != NULL && size)
*size = part->len << 2;
diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c
index d843a6c9c6df..2d9d79150403 100644
--- a/drivers/macintosh/via-cuda.c
+++ b/drivers/macintosh/via-cuda.c
@@ -127,39 +127,34 @@ struct adb_driver via_cuda_driver = {
#endif /* CONFIG_ADB */
#ifdef CONFIG_PPC
-int __init
-find_via_cuda(void)
+int __init find_via_cuda(void)
{
- int err;
struct adb_request req;
+ phys_addr_t taddr;
+ u32 *reg;
+ int err;
if (vias != 0)
return 1;
- vias = find_devices("via-cuda");
+ vias = of_find_node_by_name(NULL, "via-cuda");
if (vias == 0)
return 0;
- if (vias->next != 0)
- printk(KERN_WARNING "Warning: only using 1st via-cuda\n");
-
-#if 0
- { int i;
-
- printk("find_via_cuda: node = %p, addrs =", vias->node);
- for (i = 0; i < vias->n_addrs; ++i)
- printk(" %x(%x)", vias->addrs[i].address, vias->addrs[i].size);
- printk(", intrs =");
- for (i = 0; i < vias->n_intrs; ++i)
- printk(" %x", vias->intrs[i].line);
- printk("\n"); }
-#endif
- if (vias->n_addrs != 1 || vias->n_intrs != 1) {
- printk(KERN_ERR "via-cuda: expecting 1 address (%d) and 1 interrupt (%d)\n",
- vias->n_addrs, vias->n_intrs);
- if (vias->n_addrs < 1 || vias->n_intrs < 1)
- return 0;
+ reg = (u32 *)get_property(vias, "reg", NULL);
+ if (reg == NULL) {
+ printk(KERN_ERR "via-cuda: No \"reg\" property !\n");
+ goto fail;
+ }
+ taddr = of_translate_address(vias, reg);
+ if (taddr == 0) {
+ printk(KERN_ERR "via-cuda: Can't translate address !\n");
+ goto fail;
+ }
+ via = ioremap(taddr, 0x2000);
+ if (via == NULL) {
+ printk(KERN_ERR "via-cuda: Can't map address !\n");
+ goto fail;
}
- via = ioremap(vias->addrs->address, 0x2000);
cuda_state = idle;
sys_ctrler = SYS_CTRLER_CUDA;
@@ -185,6 +180,11 @@ find_via_cuda(void)
cuda_poll();
return 1;
+
+ fail:
+ of_node_put(vias);
+ vias = NULL;
+ return 0;
}
#endif /* CONFIG_PPC */
@@ -193,10 +193,6 @@ static int __init via_cuda_start(void)
if (via == NULL)
return -ENODEV;
-#ifdef CONFIG_PPC
- request_OF_resource(vias, 0, NULL);
-#endif
-
if (request_irq(CUDA_IRQ, cuda_interrupt, 0, "ADB", cuda_interrupt)) {
printk(KERN_ERR "cuda_init: can't get irq %d\n", CUDA_IRQ);
return -EAGAIN;
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 564043508569..6eb93e45fcd3 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -55,6 +55,8 @@
#include <asm/sections.h>
#include <asm/irq.h>
#include <asm/pmac_feature.h>
+#include <asm/pmac_pfunc.h>
+#include <asm/pmac_low_i2c.h>
#include <asm/uaccess.h>
#include <asm/mmu_context.h>
#include <asm/cputable.h>
@@ -147,6 +149,7 @@ static struct device_node *vias;
static int pmu_kind = PMU_UNKNOWN;
static int pmu_fully_inited = 0;
static int pmu_has_adb;
+static struct device_node *gpio_node;
static unsigned char __iomem *gpio_reg = NULL;
static int gpio_irq = -1;
static int gpio_irq_enabled = -1;
@@ -157,8 +160,8 @@ static int pmu_version;
static int drop_interrupts;
#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
static int option_lid_wakeup = 1;
-static int sleep_in_progress;
#endif /* CONFIG_PM && CONFIG_PPC32 */
+static int sleep_in_progress;
static unsigned long async_req_locks;
static unsigned int pmu_irq_stats[11];
@@ -196,7 +199,6 @@ static int pmu_adb_reset_bus(void);
#endif /* CONFIG_ADB */
static int init_pmu(void);
-static int pmu_queue_request(struct adb_request *req);
static void pmu_start(void);
static irqreturn_t via_pmu_interrupt(int irq, void *arg, struct pt_regs *regs);
static irqreturn_t gpio1_interrupt(int irq, void *arg, struct pt_regs *regs);
@@ -295,22 +297,26 @@ static struct backlight_controller pmu_backlight_controller = {
};
#endif /* CONFIG_PMAC_BACKLIGHT */
-int
-find_via_pmu(void)
+int __init find_via_pmu(void)
{
+ u64 taddr;
+ u32 *reg;
+
if (via != 0)
return 1;
- vias = find_devices("via-pmu");
- if (vias == 0)
+ vias = of_find_node_by_name(NULL, "via-pmu");
+ if (vias == NULL)
return 0;
- if (vias->next != 0)
- printk(KERN_WARNING "Warning: only using 1st via-pmu\n");
- if (vias->n_addrs < 1 || vias->n_intrs < 1) {
- printk(KERN_ERR "via-pmu: %d addresses, %d interrupts!\n",
- vias->n_addrs, vias->n_intrs);
- if (vias->n_addrs < 1 || vias->n_intrs < 1)
- return 0;
+ reg = (u32 *)get_property(vias, "reg", NULL);
+ if (reg == NULL) {
+ printk(KERN_ERR "via-pmu: No \"reg\" property !\n");
+ goto fail;
+ }
+ taddr = of_translate_address(vias, reg);
+ if (taddr == OF_BAD_ADDR) {
+ printk(KERN_ERR "via-pmu: Can't translate address !\n");
+ goto fail;
}
spin_lock_init(&pmu_lock);
@@ -331,7 +337,8 @@ find_via_pmu(void)
pmu_kind = PMU_HEATHROW_BASED;
else if (device_is_compatible(vias->parent, "Keylargo")
|| device_is_compatible(vias->parent, "K2-Keylargo")) {
- struct device_node *gpio, *gpiop;
+ struct device_node *gpiop;
+ u64 gaddr = OF_BAD_ADDR;
pmu_kind = PMU_KEYLARGO_BASED;
pmu_has_adb = (find_type_devices("adb") != NULL);
@@ -341,19 +348,24 @@ find_via_pmu(void)
PMU_INT_TICK |
PMU_INT_ENVIRONMENT;
- gpiop = find_devices("gpio");
- if (gpiop && gpiop->n_addrs) {
- gpio_reg = ioremap(gpiop->addrs->address, 0x10);
- gpio = find_devices("extint-gpio1");
- if (gpio == NULL)
- gpio = find_devices("pmu-interrupt");
- if (gpio && gpio->parent == gpiop && gpio->n_intrs)
- gpio_irq = gpio->intrs[0].line;
+ gpiop = of_find_node_by_name(NULL, "gpio");
+ if (gpiop) {
+ reg = (u32 *)get_property(gpiop, "reg", NULL);
+ if (reg)
+ gaddr = of_translate_address(gpiop, reg);
+ if (gaddr != OF_BAD_ADDR)
+ gpio_reg = ioremap(gaddr, 0x10);
}
+ if (gpio_reg == NULL)
+ printk(KERN_ERR "via-pmu: Can't find GPIO reg !\n");
} else
pmu_kind = PMU_UNKNOWN;
- via = ioremap(vias->addrs->address, 0x2000);
+ via = ioremap(taddr, 0x2000);
+ if (via == NULL) {
+ printk(KERN_ERR "via-pmu: Can't map address !\n");
+ goto fail;
+ }
out_8(&via[IER], IER_CLR | 0x7f); /* disable all intrs */
out_8(&via[IFR], 0x7f); /* clear IFR */
@@ -365,23 +377,25 @@ find_via_pmu(void)
return 0;
}
- printk(KERN_INFO "PMU driver %d initialized for %s, firmware: %02x\n",
+ printk(KERN_INFO "PMU driver v%d initialized for %s, firmware: %02x\n",
PMU_DRIVER_VERSION, pbook_type[pmu_kind], pmu_version);
sys_ctrler = SYS_CTRLER_PMU;
return 1;
+ fail:
+ of_node_put(vias);
+ vias = NULL;
+ return 0;
}
#ifdef CONFIG_ADB
-static int
-pmu_probe(void)
+static int pmu_probe(void)
{
return vias == NULL? -ENODEV: 0;
}
-static int __init
-pmu_init(void)
+static int __init pmu_init(void)
{
if (vias == NULL)
return -ENODEV;
@@ -405,7 +419,7 @@ static int __init via_pmu_start(void)
bright_req_2.complete = 1;
batt_req.complete = 1;
-#if defined(CONFIG_PPC32) && !defined(CONFIG_PPC_MERGE)
+#ifndef CONFIG_PPC_MERGE
if (pmu_kind == PMU_KEYLARGO_BASED)
openpic_set_irq_priority(vias->intrs[0].line,
OPENPIC_PRIORITY_DEFAULT + 1);
@@ -418,10 +432,22 @@ static int __init via_pmu_start(void)
return -EAGAIN;
}
- if (pmu_kind == PMU_KEYLARGO_BASED && gpio_irq != -1) {
- if (request_irq(gpio_irq, gpio1_interrupt, 0, "GPIO1 ADB", (void *)0))
- printk(KERN_ERR "pmu: can't get irq %d (GPIO1)\n", gpio_irq);
- gpio_irq_enabled = 1;
+ if (pmu_kind == PMU_KEYLARGO_BASED) {
+ gpio_node = of_find_node_by_name(NULL, "extint-gpio1");
+ if (gpio_node == NULL)
+ gpio_node = of_find_node_by_name(NULL,
+ "pmu-interrupt");
+ if (gpio_node && gpio_node->n_intrs > 0)
+ gpio_irq = gpio_node->intrs[0].line;
+
+ if (gpio_irq != -1) {
+ if (request_irq(gpio_irq, gpio1_interrupt, 0,
+ "GPIO1 ADB", (void *)0))
+ printk(KERN_ERR "pmu: can't get irq %d"
+ " (GPIO1)\n", gpio_irq);
+ else
+ gpio_irq_enabled = 1;
+ }
}
/* Enable interrupts */
@@ -454,9 +480,6 @@ static int __init via_pmu_dev_init(void)
if (vias == NULL)
return -ENODEV;
-#ifndef CONFIG_PPC64
- request_OF_resource(vias, 0, NULL);
-#endif
#ifdef CONFIG_PMAC_BACKLIGHT
/* Enable backlight */
register_backlight_controller(&pmu_backlight_controller, NULL, "pmu");
@@ -1371,7 +1394,6 @@ next:
}
pmu_done(req);
} else {
-#if defined(CONFIG_XMON) && !defined(CONFIG_PPC64)
if (len == 4 && data[1] == 0x2c) {
extern int xmon_wants_key, xmon_adb_keycode;
if (xmon_wants_key) {
@@ -1379,7 +1401,6 @@ next:
return;
}
}
-#endif /* defined(CONFIG_XMON) && !defined(CONFIG_PPC64) */
#ifdef CONFIG_ADB
/*
* XXX On the [23]400 the PMU gives us an up
@@ -1782,258 +1803,6 @@ pmu_present(void)
return via != 0;
}
-struct pmu_i2c_hdr {
- u8 bus;
- u8 mode;
- u8 bus2;
- u8 address;
- u8 sub_addr;
- u8 comb_addr;
- u8 count;
-};
-
-int
-pmu_i2c_combined_read(int bus, int addr, int subaddr, u8* data, int len)
-{
- struct adb_request req;
- struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
- int retry;
- int rc;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- hdr->bus = bus;
- hdr->address = addr & 0xfe;
- hdr->mode = PMU_I2C_MODE_COMBINED;
- hdr->bus2 = 0;
- hdr->sub_addr = subaddr;
- hdr->comb_addr = addr | 1;
- hdr->count = len;
-
- req.nbytes = sizeof(struct pmu_i2c_hdr) + 1;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.data[0] = PMU_I2C_CMD;
- req.reply[0] = 0xff;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- break;
- mdelay(15);
- }
- if (req.reply[0] != PMU_I2C_STATUS_OK)
- return -1;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- mdelay(15);
-
- hdr->bus = PMU_I2C_BUS_STATUS;
- req.reply[0] = 0xff;
-
- req.nbytes = 2;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.data[0] = PMU_I2C_CMD;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_DATAREAD) {
- memcpy(data, &req.reply[1], req.reply_len - 1);
- return req.reply_len - 1;
- }
- }
- return -1;
-}
-
-int
-pmu_i2c_stdsub_write(int bus, int addr, int subaddr, u8* data, int len)
-{
- struct adb_request req;
- struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
- int retry;
- int rc;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- hdr->bus = bus;
- hdr->address = addr & 0xfe;
- hdr->mode = PMU_I2C_MODE_STDSUB;
- hdr->bus2 = 0;
- hdr->sub_addr = subaddr;
- hdr->comb_addr = addr & 0xfe;
- hdr->count = len;
-
- req.data[0] = PMU_I2C_CMD;
- memcpy(&req.data[sizeof(struct pmu_i2c_hdr) + 1], data, len);
- req.nbytes = sizeof(struct pmu_i2c_hdr) + len + 1;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.reply[0] = 0xff;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- break;
- mdelay(15);
- }
- if (req.reply[0] != PMU_I2C_STATUS_OK)
- return -1;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- mdelay(15);
-
- hdr->bus = PMU_I2C_BUS_STATUS;
- req.reply[0] = 0xff;
-
- req.nbytes = 2;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.data[0] = PMU_I2C_CMD;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- return len;
- }
- return -1;
-}
-
-int
-pmu_i2c_simple_read(int bus, int addr, u8* data, int len)
-{
- struct adb_request req;
- struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
- int retry;
- int rc;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- hdr->bus = bus;
- hdr->address = addr | 1;
- hdr->mode = PMU_I2C_MODE_SIMPLE;
- hdr->bus2 = 0;
- hdr->sub_addr = 0;
- hdr->comb_addr = 0;
- hdr->count = len;
-
- req.data[0] = PMU_I2C_CMD;
- req.nbytes = sizeof(struct pmu_i2c_hdr) + 1;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.reply[0] = 0xff;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- break;
- mdelay(15);
- }
- if (req.reply[0] != PMU_I2C_STATUS_OK)
- return -1;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- mdelay(15);
-
- hdr->bus = PMU_I2C_BUS_STATUS;
- req.reply[0] = 0xff;
-
- req.nbytes = 2;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.data[0] = PMU_I2C_CMD;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_DATAREAD) {
- memcpy(data, &req.reply[1], req.reply_len - 1);
- return req.reply_len - 1;
- }
- }
- return -1;
-}
-
-int
-pmu_i2c_simple_write(int bus, int addr, u8* data, int len)
-{
- struct adb_request req;
- struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
- int retry;
- int rc;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- hdr->bus = bus;
- hdr->address = addr & 0xfe;
- hdr->mode = PMU_I2C_MODE_SIMPLE;
- hdr->bus2 = 0;
- hdr->sub_addr = 0;
- hdr->comb_addr = 0;
- hdr->count = len;
-
- req.data[0] = PMU_I2C_CMD;
- memcpy(&req.data[sizeof(struct pmu_i2c_hdr) + 1], data, len);
- req.nbytes = sizeof(struct pmu_i2c_hdr) + len + 1;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.reply[0] = 0xff;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- break;
- mdelay(15);
- }
- if (req.reply[0] != PMU_I2C_STATUS_OK)
- return -1;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- mdelay(15);
-
- hdr->bus = PMU_I2C_BUS_STATUS;
- req.reply[0] = 0xff;
-
- req.nbytes = 2;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.data[0] = PMU_I2C_CMD;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- return len;
- }
- return -1;
-}
-
#ifdef CONFIG_PM
static LIST_HEAD(sleep_notifiers);
@@ -2338,8 +2107,9 @@ pmac_suspend_devices(void)
return -EBUSY;
}
- /* Disable clock spreading on some machines */
- pmac_tweak_clock_spreading(0);
+ /* Call platform functions marked "on sleep" */
+ pmac_pfunc_i2c_suspend();
+ pmac_pfunc_base_suspend();
/* Stop preemption */
preempt_disable();
@@ -2411,8 +2181,9 @@ pmac_wakeup_devices(void)
mdelay(10);
preempt_enable();
- /* Re-enable clock spreading on some machines */
- pmac_tweak_clock_spreading(1);
+ /* Call platform functions marked "on wake" */
+ pmac_pfunc_base_resume();
+ pmac_pfunc_i2c_resume();
/* Resume devices */
device_resume();
@@ -3130,16 +2901,13 @@ static int __init init_pmu_sysfs(void)
subsys_initcall(init_pmu_sysfs);
EXPORT_SYMBOL(pmu_request);
+EXPORT_SYMBOL(pmu_queue_request);
EXPORT_SYMBOL(pmu_poll);
EXPORT_SYMBOL(pmu_poll_adb);
EXPORT_SYMBOL(pmu_wait_complete);
EXPORT_SYMBOL(pmu_suspend);
EXPORT_SYMBOL(pmu_resume);
EXPORT_SYMBOL(pmu_unlock);
-EXPORT_SYMBOL(pmu_i2c_combined_read);
-EXPORT_SYMBOL(pmu_i2c_stdsub_write);
-EXPORT_SYMBOL(pmu_i2c_simple_read);
-EXPORT_SYMBOL(pmu_i2c_simple_write);
#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
EXPORT_SYMBOL(pmu_enable_irled);
EXPORT_SYMBOL(pmu_battery_count);
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index 57460e46c89f..906d3ecae6e6 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -21,6 +21,7 @@
#include <asm/io.h>
#include <asm/system.h>
#include <asm/sections.h>
+#include <asm/pmac_low_i2c.h>
#include "windfarm.h"
@@ -157,53 +158,21 @@ static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter,
static int wf_lm75_attach(struct i2c_adapter *adapter)
{
- u8 bus_id;
- struct device_node *smu, *bus, *dev;
-
- /* We currently only deal with LM75's hanging off the SMU
- * i2c busses. If we extend that driver to other/older
- * machines, we should split this function into SMU-i2c,
- * keywest-i2c, PMU-i2c, ...
- */
+ struct device_node *busnode, *dev;
+ struct pmac_i2c_bus *bus;
DBG("wf_lm75: adapter %s detected\n", adapter->name);
- if (strncmp(adapter->name, "smu-i2c-", 8) != 0)
- return 0;
- smu = of_find_node_by_type(NULL, "smu");
- if (smu == NULL)
- return 0;
-
- /* Look for the bus in the device-tree */
- bus_id = (u8)simple_strtoul(adapter->name + 8, NULL, 16);
-
- DBG("wf_lm75: bus ID is %x\n", bus_id);
-
- /* Look for sensors subdir */
- for (bus = NULL;
- (bus = of_get_next_child(smu, bus)) != NULL;) {
- u32 *reg;
-
- if (strcmp(bus->name, "i2c"))
- continue;
- reg = (u32 *)get_property(bus, "reg", NULL);
- if (reg == NULL)
- continue;
- if (bus_id == *reg)
- break;
- }
- of_node_put(smu);
- if (bus == NULL) {
- printk(KERN_WARNING "windfarm: SMU i2c bus 0x%x not found"
- " in device-tree !\n", bus_id);
- return 0;
- }
+ bus = pmac_i2c_adapter_to_bus(adapter);
+ if (bus == NULL)
+ return -ENODEV;
+ busnode = pmac_i2c_get_bus_node(bus);
DBG("wf_lm75: bus found, looking for device...\n");
/* Now look for lm75(s) in there */
for (dev = NULL;
- (dev = of_get_next_child(bus, dev)) != NULL;) {
+ (dev = of_get_next_child(busnode, dev)) != NULL;) {
const char *loc =
get_property(dev, "hwsensor-location", NULL);
u32 *reg = (u32 *)get_property(dev, "reg", NULL);
@@ -217,9 +186,6 @@ static int wf_lm75_attach(struct i2c_adapter *adapter)
else if (device_is_compatible(dev, "ds1775"))
wf_lm75_create(adapter, *reg, 1, loc);
}
-
- of_node_put(bus);
-
return 0;
}
diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c
index 932dcf0366eb..311a4122bd70 100644
--- a/drivers/scsi/mac53c94.c
+++ b/drivers/scsi/mac53c94.c
@@ -432,11 +432,12 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat
struct Scsi_Host *host;
void *dma_cmd_space;
unsigned char *clkprop;
- int proplen;
+ int proplen, rc = -ENODEV;
if (macio_resource_count(mdev) != 2 || macio_irq_count(mdev) != 2) {
- printk(KERN_ERR "mac53c94: expected 2 addrs and intrs (got %d/%d)\n",
- node->n_addrs, node->n_intrs);
+ printk(KERN_ERR "mac53c94: expected 2 addrs and intrs"
+ " (got %d/%d)\n",
+ macio_resource_count(mdev), macio_irq_count(mdev));
return -ENODEV;
}
@@ -448,6 +449,7 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat
host = scsi_host_alloc(&mac53c94_template, sizeof(struct fsc_state));
if (host == NULL) {
printk(KERN_ERR "mac53c94: couldn't register host");
+ rc = -ENOMEM;
goto out_release;
}
@@ -486,6 +488,7 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat
if (dma_cmd_space == 0) {
printk(KERN_ERR "mac53c94: couldn't allocate dma "
"command space for %s\n", node->full_name);
+ rc = -ENOMEM;
goto out_free;
}
state->dma_cmds = (struct dbdma_cmd *)DBDMA_ALIGN(dma_cmd_space);
@@ -495,18 +498,21 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat
mac53c94_init(state);
- if (request_irq(state->intr, do_mac53c94_interrupt, 0, "53C94", state)) {
+ if (request_irq(state->intr, do_mac53c94_interrupt, 0, "53C94",state)) {
printk(KERN_ERR "mac53C94: can't get irq %d for %s\n",
state->intr, node->full_name);
goto out_free_dma;
}
- /* XXX FIXME: handle failure */
- scsi_add_host(host, &mdev->ofdev.dev);
- scsi_scan_host(host);
+ rc = scsi_add_host(host, &mdev->ofdev.dev);
+ if (rc != 0)
+ goto out_release_irq;
+ scsi_scan_host(host);
return 0;
+ out_release_irq:
+ free_irq(state->intr, state);
out_free_dma:
kfree(state->dma_cmd_space);
out_free:
@@ -518,7 +524,7 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat
out_release:
macio_release_resources(mdev);
- return -ENODEV;
+ return rc;
}
static int mac53c94_remove(struct macio_dev *mdev)
diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c
index bdccf73cf9fe..d6d2125f9044 100644
--- a/drivers/scsi/mesh.c
+++ b/drivers/scsi/mesh.c
@@ -1869,7 +1869,8 @@ static int mesh_probe(struct macio_dev *mdev, const struct of_device_id *match)
if (macio_resource_count(mdev) != 2 || macio_irq_count(mdev) != 2) {
printk(KERN_ERR "mesh: expected 2 addrs and 2 intrs"
- " (got %d,%d)\n", mesh->n_addrs, mesh->n_intrs);
+ " (got %d,%d)\n", macio_resource_count(mdev),
+ macio_irq_count(mdev));
return -ENODEV;
}
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 987d22b53c22..16af5626c243 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -608,7 +608,7 @@ static int cpm_uart_tx_pump(struct uart_port *port)
p = cpm2cpu_addr(bdp->cbd_bufaddr);
- *p++ = xmit->buf[xmit->tail];
+ *p++ = port->x_char;
bdp->cbd_datlen = 1;
bdp->cbd_sc |= BD_SC_READY;
/* Get next BD. */
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 5ddd8ab1f108..ea24129eb6b9 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -1431,11 +1431,14 @@ static int __init pmz_init_port(struct uart_pmac_port *uap)
char name[1];
} *slots;
int len;
+ struct resource r_ports, r_rxdma, r_txdma;
/*
* Request & map chip registers
*/
- uap->port.mapbase = np->addrs[0].address;
+ if (of_address_to_resource(np, 0, &r_ports))
+ return -ENODEV;
+ uap->port.mapbase = r_ports.start;
uap->port.membase = ioremap(uap->port.mapbase, 0x1000);
uap->control_reg = uap->port.membase;
@@ -1445,16 +1448,20 @@ static int __init pmz_init_port(struct uart_pmac_port *uap)
* Request & map DBDMA registers
*/
#ifdef HAS_DBDMA
- if (np->n_addrs >= 3 && np->n_intrs >= 3)
+ if (of_address_to_resource(np, 1, &r_txdma) == 0 &&
+ of_address_to_resource(np, 2, &r_rxdma) == 0)
uap->flags |= PMACZILOG_FLAG_HAS_DMA;
+#else
+ memset(&r_txdma, 0, sizeof(struct resource));
+ memset(&r_rxdma, 0, sizeof(struct resource));
#endif
if (ZS_HAS_DMA(uap)) {
- uap->tx_dma_regs = ioremap(np->addrs[np->n_addrs - 2].address, 0x1000);
+ uap->tx_dma_regs = ioremap(r_txdma.start, 0x100);
if (uap->tx_dma_regs == NULL) {
uap->flags &= ~PMACZILOG_FLAG_HAS_DMA;
goto no_dma;
}
- uap->rx_dma_regs = ioremap(np->addrs[np->n_addrs - 1].address, 0x1000);
+ uap->rx_dma_regs = ioremap(r_rxdma.start, 0x100);
if (uap->rx_dma_regs == NULL) {
iounmap(uap->tx_dma_regs);
uap->tx_dma_regs = NULL;
diff --git a/drivers/video/controlfb.c b/drivers/video/controlfb.c
index 403d17377f8d..03798e9c882d 100644
--- a/drivers/video/controlfb.c
+++ b/drivers/video/controlfb.c
@@ -133,12 +133,6 @@ static int controlfb_mmap(struct fb_info *info, struct file *file,
static int controlfb_set_par (struct fb_info *info);
static int controlfb_check_var (struct fb_var_screeninfo *var, struct fb_info *info);
-/*
- * inititialization
- */
-int control_init(void);
-void control_setup(char *);
-
/******************** Prototypes for internal functions **********************/
static void set_control_clock(unsigned char *params);
@@ -550,9 +544,46 @@ static void control_set_hardware(struct fb_info_control *p, struct fb_par_contro
/*
- * Called from fbmem.c for probing & initializing
+ * Parse user speficied options (`video=controlfb:')
*/
-int __init control_init(void)
+static void __init control_setup(char *options)
+{
+ char *this_opt;
+
+ if (!options || !*options)
+ return;
+
+ while ((this_opt = strsep(&options, ",")) != NULL) {
+ if (!strncmp(this_opt, "vmode:", 6)) {
+ int vmode = simple_strtoul(this_opt+6, NULL, 0);
+ if (vmode > 0 && vmode <= VMODE_MAX &&
+ control_mac_modes[vmode - 1].m[1] >= 0)
+ default_vmode = vmode;
+ } else if (!strncmp(this_opt, "cmode:", 6)) {
+ int depth = simple_strtoul(this_opt+6, NULL, 0);
+ switch (depth) {
+ case CMODE_8:
+ case CMODE_16:
+ case CMODE_32:
+ default_cmode = depth;
+ break;
+ case 8:
+ default_cmode = CMODE_8;
+ break;
+ case 15:
+ case 16:
+ default_cmode = CMODE_16;
+ break;
+ case 24:
+ case 32:
+ default_cmode = CMODE_32;
+ break;
+ }
+ }
+ }
+}
+
+static int __init control_init(void)
{
struct device_node *dp;
char *option = NULL;
@@ -651,15 +682,16 @@ static void __init find_vram_size(struct fb_info_control *p)
static int __init control_of_init(struct device_node *dp)
{
struct fb_info_control *p;
- unsigned long addr;
- int i;
+ struct resource fb_res, reg_res;
if (control_fb) {
printk(KERN_ERR "controlfb: only one control is supported\n");
return -ENXIO;
}
- if(dp->n_addrs != 2) {
- printk(KERN_ERR "expecting 2 address for control (got %d)", dp->n_addrs);
+
+ if (of_pci_address_to_resource(dp, 2, &fb_res) ||
+ of_pci_address_to_resource(dp, 1, &reg_res)) {
+ printk(KERN_ERR "can't get 2 addresses for control\n");
return -ENXIO;
}
p = kmalloc(sizeof(*p), GFP_KERNEL);
@@ -669,18 +701,12 @@ static int __init control_of_init(struct device_node *dp)
memset(p, 0, sizeof(*p));
/* Map in frame buffer and registers */
- for (i = 0; i < dp->n_addrs; ++i) {
- addr = dp->addrs[i].address;
- if (dp->addrs[i].size >= 0x800000) {
- p->fb_orig_base = addr;
- p->fb_orig_size = dp->addrs[i].size;
- /* use the big-endian aperture (??) */
- p->frame_buffer_phys = addr + 0x800000;
- } else {
- p->control_regs_phys = addr;
- p->control_regs_size = dp->addrs[i].size;
- }
- }
+ p->fb_orig_base = fb_res.start;
+ p->fb_orig_size = fb_res.end - fb_res.start + 1;
+ /* use the big-endian aperture (??) */
+ p->frame_buffer_phys = fb_res.start + 0x800000;
+ p->control_regs_phys = reg_res.start;
+ p->control_regs_size = reg_res.end - reg_res.start + 1;
if (!p->fb_orig_base ||
!request_mem_region(p->fb_orig_base,p->fb_orig_size,"controlfb")) {
@@ -1059,43 +1085,3 @@ static void control_cleanup(void)
}
-/*
- * Parse user speficied options (`video=controlfb:')
- */
-void __init control_setup(char *options)
-{
- char *this_opt;
-
- if (!options || !*options)
- return;
-
- while ((this_opt = strsep(&options, ",")) != NULL) {
- if (!strncmp(this_opt, "vmode:", 6)) {
- int vmode = simple_strtoul(this_opt+6, NULL, 0);
- if (vmode > 0 && vmode <= VMODE_MAX &&
- control_mac_modes[vmode - 1].m[1] >= 0)
- default_vmode = vmode;
- } else if (!strncmp(this_opt, "cmode:", 6)) {
- int depth = simple_strtoul(this_opt+6, NULL, 0);
- switch (depth) {
- case CMODE_8:
- case CMODE_16:
- case CMODE_32:
- default_cmode = depth;
- break;
- case 8:
- default_cmode = CMODE_8;
- break;
- case 15:
- case 16:
- default_cmode = CMODE_16;
- break;
- case 24:
- case 32:
- default_cmode = CMODE_32;
- break;
- }
- }
- }
-}
-
diff --git a/drivers/video/offb.c b/drivers/video/offb.c
index 00d87f5bb7be..ad1434e3f227 100644
--- a/drivers/video/offb.c
+++ b/drivers/video/offb.c
@@ -223,6 +223,7 @@ static int offb_blank(int blank, struct fb_info *info)
int __init offb_init(void)
{
struct device_node *dp = NULL, *boot_disp = NULL;
+
#if defined(CONFIG_BOOTX_TEXT) && defined(CONFIG_PPC32)
struct device_node *macos_display = NULL;
#endif
@@ -234,60 +235,54 @@ int __init offb_init(void)
if (boot_infos != 0) {
unsigned long addr =
(unsigned long) boot_infos->dispDeviceBase;
+ u32 *addrp;
+ u64 daddr, dsize;
+ unsigned int flags;
+
/* find the device node corresponding to the macos display */
while ((dp = of_find_node_by_type(dp, "display"))) {
int i;
- /*
- * Grrr... It looks like the MacOS ATI driver
- * munges the assigned-addresses property (but
- * the AAPL,address value is OK).
- */
- if (strncmp(dp->name, "ATY,", 4) == 0
- && dp->n_addrs == 1) {
- unsigned int *ap =
- (unsigned int *) get_property(dp,
- "AAPL,address",
- NULL);
- if (ap != NULL) {
- dp->addrs[0].address = *ap;
- dp->addrs[0].size = 0x01000000;
- }
- }
/*
- * The LTPro on the Lombard powerbook has no addresses
- * on the display nodes, they are on their parent.
+ * Look for an AAPL,address property first.
*/
- if (dp->n_addrs == 0
- && device_is_compatible(dp, "ATY,264LTPro")) {
- int na;
- unsigned int *ap = (unsigned int *)
- get_property(dp, "AAPL,address", &na);
- if (ap != 0)
- for (na /= sizeof(unsigned int);
- na > 0; --na, ++ap)
- if (*ap <= addr
- && addr <
- *ap + 0x1000000)
- goto foundit;
+ unsigned int na;
+ unsigned int *ap =
+ (unsigned int *)get_property(dp, "AAPL,address",
+ &na);
+ if (ap != 0) {
+ for (na /= sizeof(unsigned int); na > 0;
+ --na, ++ap)
+ if (*ap <= addr &&
+ addr < *ap + 0x1000000) {
+ macos_display = dp;
+ goto foundit;
+ }
}
/*
* See if the display address is in one of the address
* ranges for this display.
*/
- for (i = 0; i < dp->n_addrs; ++i) {
- if (dp->addrs[i].address <= addr
- && addr <
- dp->addrs[i].address +
- dp->addrs[i].size)
+ i = 0;
+ for (;;) {
+ addrp = of_get_address(dp, i++, &dsize, &flags);
+ if (addrp == NULL)
break;
+ if (!(flags & IORESOURCE_MEM))
+ continue;
+ daddr = of_translate_address(dp, addrp);
+ if (daddr == OF_BAD_ADDR)
+ continue;
+ if (daddr <= addr && addr < (daddr + dsize)) {
+ macos_display = dp;
+ goto foundit;
+ }
}
- if (i < dp->n_addrs) {
- foundit:
+ foundit:
+ if (macos_display) {
printk(KERN_INFO "MacOS display is %s\n",
dp->full_name);
- macos_display = dp;
break;
}
}
@@ -326,8 +321,10 @@ static void __init offb_init_nodriver(struct device_node *dp)
int *pp, i;
unsigned int len;
int width = 640, height = 480, depth = 8, pitch;
- unsigned int rsize, *up;
- unsigned long address = 0;
+ unsigned int flags, rsize, *up;
+ u64 address = OF_BAD_ADDR;
+ u32 *addrp;
+ u64 asize;
if ((pp = (int *) get_property(dp, "depth", &len)) != NULL
&& len == sizeof(int))
@@ -363,7 +360,7 @@ static void __init offb_init_nodriver(struct device_node *dp)
break;
}
if (pdev) {
- for (i = 0; i < 6 && address == 0; i++) {
+ for (i = 0; i < 6 && address == OF_BAD_ADDR; i++) {
if ((pci_resource_flags(pdev, i) &
IORESOURCE_MEM) &&
(pci_resource_len(pdev, i) >= rsize))
@@ -374,27 +371,33 @@ static void __init offb_init_nodriver(struct device_node *dp)
}
#endif /* CONFIG_PCI */
- if (address == 0 &&
- (up = (unsigned *) get_property(dp, "address", &len)) != NULL &&
- len == sizeof(unsigned))
- address = (u_long) * up;
- if (address == 0) {
- for (i = 0; i < dp->n_addrs; ++i)
- if (dp->addrs[i].size >=
- pitch * height * depth / 8)
- break;
- if (i >= dp->n_addrs) {
+ /* This one is dodgy, we may drop it ... */
+ if (address == OF_BAD_ADDR &&
+ (up = (unsigned *) get_property(dp, "address", &len)) != NULL &&
+ len == sizeof(unsigned int))
+ address = (u64) * up;
+
+ if (address == OF_BAD_ADDR) {
+ for (i = 0; (addrp = of_get_address(dp, i, &asize, &flags))
+ != NULL; i++) {
+ if (!(flags & IORESOURCE_MEM))
+ continue;
+ if (asize >= pitch * height * depth / 8)
+ break;
+ }
+ if (addrp == NULL) {
printk(KERN_ERR
"no framebuffer address found for %s\n",
dp->full_name);
return;
}
-
- address = (u_long) dp->addrs[i].address;
-
-#ifdef CONFIG_PPC64
- address += ((struct pci_dn *)dp->data)->phb->pci_mem_offset;
-#endif
+ address = of_translate_address(dp, addrp);
+ if (address == OF_BAD_ADDR) {
+ printk(KERN_ERR
+ "can't translate framebuffer address for %s\n",
+ dp->full_name);
+ return;
+ }
/* kludge for valkyrie */
if (strcmp(dp->name, "valkyrie") == 0)
@@ -459,7 +462,9 @@ static void __init offb_init_fb(const char *name, const char *full_name,
par->cmap_type = cmap_unknown;
if (depth == 8) {
- /* XXX kludge for ati */
+
+ /* Palette hacks disabled for now */
+#if 0
if (dp && !strncmp(name, "ATY,Rage128", 11)) {
unsigned long regbase = dp->addrs[2].address;
par->cmap_adr = ioremap(regbase, 0x1FFF);
@@ -490,6 +495,7 @@ static void __init offb_init_fb(const char *name, const char *full_name,
par->cmap_adr = ioremap(regbase + 0x6000, 0x1000);
par->cmap_type = cmap_gxt2000;
}
+#endif
fix->visual = par->cmap_adr ? FB_VISUAL_PSEUDOCOLOR
: FB_VISUAL_STATIC_PSEUDOCOLOR;
} else
diff --git a/drivers/video/platinumfb.c b/drivers/video/platinumfb.c
index ca4082ae5a18..335e37465559 100644
--- a/drivers/video/platinumfb.c
+++ b/drivers/video/platinumfb.c
@@ -69,6 +69,8 @@ struct fb_info_platinum {
unsigned long total_vram;
int clktype;
int dactype;
+
+ struct resource rsrc_fb, rsrc_reg;
};
/*
@@ -97,9 +99,6 @@ static int platinum_var_to_par(struct fb_var_screeninfo *var,
* Interface used by the world
*/
-int platinumfb_init(void);
-int platinumfb_setup(char*);
-
static struct fb_ops platinumfb_ops = {
.owner = THIS_MODULE,
.fb_check_var = platinumfb_check_var,
@@ -138,13 +137,15 @@ static int platinumfb_set_par (struct fb_info *info)
init = platinum_reg_init[pinfo->vmode-1];
- if (pinfo->vmode == 13 && pinfo->cmode > 0)
- offset = 0x10;
+ if ((pinfo->vmode == VMODE_832_624_75) && (pinfo->cmode > CMODE_8))
+ offset = 0x10;
+
info->screen_base = pinfo->frame_buffer + init->fb_offset + offset;
info->fix.smem_start = (pinfo->frame_buffer_phys) + init->fb_offset + offset;
info->fix.visual = (pinfo->cmode == CMODE_8) ?
FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
- info->fix.line_length = vmode_attrs[pinfo->vmode-1].hres * (1<<pinfo->cmode) + offset;
+ info->fix.line_length = vmode_attrs[pinfo->vmode-1].hres * (1<<pinfo->cmode)
+ + offset;
printk("line_length: %x\n", info->fix.line_length);
return 0;
}
@@ -221,7 +222,9 @@ static int platinumfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
static inline int platinum_vram_reqd(int video_mode, int color_mode)
{
return vmode_attrs[video_mode-1].vres *
- (vmode_attrs[video_mode-1].hres * (1<<color_mode) + 0x20) +0x1000;
+ (vmode_attrs[video_mode-1].hres * (1<<color_mode) +
+ ((video_mode == VMODE_832_624_75) &&
+ (color_mode > CMODE_8)) ? 0x10 : 0x20) + 0x1000;
}
#define STORE_D2(a, d) { \
@@ -481,7 +484,7 @@ static int platinum_var_to_par(struct fb_var_screeninfo *var,
/*
* Parse user speficied options (`video=platinumfb:')
*/
-int __init platinumfb_setup(char *options)
+static int __init platinumfb_setup(char *options)
{
char *this_opt;
@@ -522,19 +525,15 @@ int __init platinumfb_setup(char *options)
#define invalidate_cache(addr)
#endif
-static int __devinit platinumfb_probe(struct of_device* odev, const struct of_device_id *match)
+static int __devinit platinumfb_probe(struct of_device* odev,
+ const struct of_device_id *match)
{
struct device_node *dp = odev->node;
struct fb_info *info;
struct fb_info_platinum *pinfo;
- unsigned long addr, size;
volatile __u8 *fbuffer;
- int i, bank0, bank1, bank2, bank3, rc;
+ int bank0, bank1, bank2, bank3, rc;
- if (dp->n_addrs != 2) {
- printk(KERN_ERR "expecting 2 address for platinum (got %d)", dp->n_addrs);
- return -ENXIO;
- }
printk(KERN_INFO "platinumfb: Found Apple Platinum video hardware\n");
info = framebuffer_alloc(sizeof(*pinfo), &odev->dev);
@@ -542,26 +541,39 @@ static int __devinit platinumfb_probe(struct of_device* odev, const struct of_de
return -ENOMEM;
pinfo = info->par;
- /* Map in frame buffer and registers */
- for (i = 0; i < dp->n_addrs; ++i) {
- addr = dp->addrs[i].address;
- size = dp->addrs[i].size;
- /* Let's assume we can request either all or nothing */
- if (!request_mem_region(addr, size, "platinumfb")) {
- framebuffer_release(info);
- return -ENXIO;
- }
- if (size >= 0x400000) {
- /* frame buffer - map only 4MB */
- pinfo->frame_buffer_phys = addr;
- pinfo->frame_buffer = __ioremap(addr, 0x400000, _PAGE_WRITETHRU);
- pinfo->base_frame_buffer = pinfo->frame_buffer;
- } else {
- /* registers */
- pinfo->platinum_regs_phys = addr;
- pinfo->platinum_regs = ioremap(addr, size);
- }
+ if (of_address_to_resource(dp, 0, &pinfo->rsrc_reg) ||
+ of_address_to_resource(dp, 1, &pinfo->rsrc_fb)) {
+ printk(KERN_ERR "platinumfb: Can't get resources\n");
+ framebuffer_release(info);
+ return -ENXIO;
}
+ if (!request_mem_region(pinfo->rsrc_reg.start,
+ pinfo->rsrc_reg.start -
+ pinfo->rsrc_reg.end + 1,
+ "platinumfb registers")) {
+ framebuffer_release(info);
+ return -ENXIO;
+ }
+ if (!request_mem_region(pinfo->rsrc_fb.start,
+ pinfo->rsrc_fb.start
+ - pinfo->rsrc_fb.end + 1,
+ "platinumfb framebuffer")) {
+ release_mem_region(pinfo->rsrc_reg.start,
+ pinfo->rsrc_reg.end -
+ pinfo->rsrc_reg.start + 1);
+ framebuffer_release(info);
+ return -ENXIO;
+ }
+
+ /* frame buffer - map only 4MB */
+ pinfo->frame_buffer_phys = pinfo->rsrc_fb.start;
+ pinfo->frame_buffer = __ioremap(pinfo->rsrc_fb.start, 0x400000,
+ _PAGE_WRITETHRU);
+ pinfo->base_frame_buffer = pinfo->frame_buffer;
+
+ /* registers */
+ pinfo->platinum_regs_phys = pinfo->rsrc_reg.start;
+ pinfo->platinum_regs = ioremap(pinfo->rsrc_reg.start, 0x1000);
pinfo->cmap_regs_phys = 0xf301b000; /* XXX not in prom? */
request_mem_region(pinfo->cmap_regs_phys, 0x1000, "platinumfb cmap");
@@ -624,18 +636,16 @@ static int __devexit platinumfb_remove(struct of_device* odev)
{
struct fb_info *info = dev_get_drvdata(&odev->dev);
struct fb_info_platinum *pinfo = info->par;
- struct device_node *dp = odev->node;
- unsigned long addr, size;
- int i;
unregister_framebuffer (info);
/* Unmap frame buffer and registers */
- for (i = 0; i < dp->n_addrs; ++i) {
- addr = dp->addrs[i].address;
- size = dp->addrs[i].size;
- release_mem_region(addr, size);
- }
+ release_mem_region(pinfo->rsrc_fb.start,
+ pinfo->rsrc_fb.end -
+ pinfo->rsrc_fb.start + 1);
+ release_mem_region(pinfo->rsrc_reg.start,
+ pinfo->rsrc_reg.end -
+ pinfo->rsrc_reg.start + 1);
iounmap(pinfo->frame_buffer);
iounmap(pinfo->platinum_regs);
release_mem_region(pinfo->cmap_regs_phys, 0x1000);
@@ -662,7 +672,7 @@ static struct of_platform_driver platinum_driver =
.remove = platinumfb_remove,
};
-int __init platinumfb_init(void)
+static int __init platinumfb_init(void)
{
#ifndef MODULE
char *option = NULL;
@@ -676,7 +686,7 @@ int __init platinumfb_init(void)
return 0;
}
-void __exit platinumfb_exit(void)
+static void __exit platinumfb_exit(void)
{
of_unregister_driver(&platinum_driver);
}
diff --git a/drivers/video/platinumfb.h b/drivers/video/platinumfb.h
index 2834fc1c344b..f6bd77cafd17 100644
--- a/drivers/video/platinumfb.h
+++ b/drivers/video/platinumfb.h
@@ -158,7 +158,9 @@ static struct platinum_regvals platinum_reg_init_14 = {
/* 832x624, 75Hz (13) */
static struct platinum_regvals platinum_reg_init_13 = {
0x70,
- { 864, 1680, 3360 }, /* MacOS does 1680 instead of 1696 to fit 16bpp in 1MB */
+ { 864, 1680, 3344 }, /* MacOS does 1680 instead of 1696 to fit 16bpp in 1MB,
+ * and we use 3344 instead of 3360 to fit in 2Mb
+ */
{ 0xff0, 4, 0, 0, 0, 0, 0x299, 0,
0, 0x21e, 0x120, 0x10, 0x23f, 0x1f, 0x25, 0x37,
0x8a, 0x22a, 0x23e, 0x536, 0x534, 4, 9, 0x52,
diff --git a/drivers/video/valkyriefb.c b/drivers/video/valkyriefb.c
index ce97ec8eae97..2bdeb4baa952 100644
--- a/drivers/video/valkyriefb.c
+++ b/drivers/video/valkyriefb.c
@@ -342,19 +342,19 @@ int __init valkyriefb_init(void)
#else /* ppc (!CONFIG_MAC) */
{
struct device_node *dp;
+ struct resource r;
- dp = find_devices("valkyrie");
+ dp = of_find_node_by_name(NULL, "valkyrie");
if (dp == 0)
return 0;
- if (dp->n_addrs != 1) {
- printk(KERN_ERR "expecting 1 address for valkyrie (got %d)\n",
- dp->n_addrs);
+ if (of_address_to_resource(dp, 0, &r)) {
+ printk(KERN_ERR "can't find address for valkyrie\n");
return 0;
}
- frame_buffer_phys = dp->addrs[0].address;
- cmap_regs_phys = dp->addrs[0].address+0x304000;
+ frame_buffer_phys = r.start;
+ cmap_regs_phys = r.start + 0x304000;
flags = _PAGE_WRITETHRU;
}
#endif /* ppc (!CONFIG_MAC) */
diff --git a/include/asm-powerpc/abs_addr.h b/include/asm-powerpc/abs_addr.h
index 18415108fc56..c5c3259e0f86 100644
--- a/include/asm-powerpc/abs_addr.h
+++ b/include/asm-powerpc/abs_addr.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_ABS_ADDR_H
#define _ASM_POWERPC_ABS_ADDR_H
+#ifdef __KERNEL__
#include <linux/config.h>
@@ -70,4 +71,5 @@ static inline unsigned long phys_to_abs(unsigned long pa)
#define iseries_hv_addr(virtaddr) \
(0x8000000000000000 | virt_to_abs(virtaddr))
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_ABS_ADDR_H */
diff --git a/include/asm-powerpc/agp.h b/include/asm-powerpc/agp.h
index 885b4631a6cf..e5ccaca2f5a4 100644
--- a/include/asm-powerpc/agp.h
+++ b/include/asm-powerpc/agp.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_AGP_H
#define _ASM_POWERPC_AGP_H
+#ifdef __KERNEL__
#include <asm/io.h>
@@ -18,4 +19,5 @@
#define free_gatt_pages(table, order) \
free_pages((unsigned long)(table), (order))
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_AGP_H */
diff --git a/include/asm-powerpc/asm-compat.h b/include/asm-powerpc/asm-compat.h
index 8b133efc9f79..8e64be0cc47d 100644
--- a/include/asm-powerpc/asm-compat.h
+++ b/include/asm-powerpc/asm-compat.h
@@ -1,7 +1,6 @@
#ifndef _ASM_POWERPC_ASM_COMPAT_H
#define _ASM_POWERPC_ASM_COMPAT_H
-#include <linux/config.h>
#include <asm/types.h>
#ifdef __ASSEMBLY__
@@ -41,6 +40,7 @@
#endif
+#ifdef __KERNEL__
#ifdef CONFIG_IBM405_ERR77
/* Erratum #77 on the 405 means we need a sync or dcbt before every
* stwcx. The old ATOMIC_SYNC_FIX covered some but not all of this.
@@ -51,5 +51,6 @@
#define PPC405_ERR77(ra,rb)
#define PPC405_ERR77_SYNC
#endif
+#endif
#endif /* _ASM_POWERPC_ASM_COMPAT_H */
diff --git a/include/asm-powerpc/bootx.h b/include/asm-powerpc/bootx.h
new file mode 100644
index 000000000000..57b82e3f89ce
--- /dev/null
+++ b/include/asm-powerpc/bootx.h
@@ -0,0 +1,171 @@
+/*
+ * This file describes the structure passed from the BootX application
+ * (for MacOS) when it is used to boot Linux.
+ *
+ * Written by Benjamin Herrenschmidt.
+ */
+
+
+#ifndef __ASM_BOOTX_H__
+#define __ASM_BOOTX_H__
+
+#include <asm/types.h>
+
+#ifdef macintosh
+#include <Types.h>
+#include "linux_type_defs.h"
+#endif
+
+#ifdef macintosh
+/* All this requires PowerPC alignment */
+#pragma options align=power
+#endif
+
+/* On kernel entry:
+ *
+ * r3 = 0x426f6f58 ('BooX')
+ * r4 = pointer to boot_infos
+ * r5 = NULL
+ *
+ * Data and instruction translation disabled, interrupts
+ * disabled, kernel loaded at physical 0x00000000 on PCI
+ * machines (will be different on NuBus).
+ */
+
+#define BOOT_INFO_VERSION 5
+#define BOOT_INFO_COMPATIBLE_VERSION 1
+
+/* Bit in the architecture flag mask. More to be defined in
+ future versions. Note that either BOOT_ARCH_PCI or
+ BOOT_ARCH_NUBUS is set. The other BOOT_ARCH_NUBUS_xxx are
+ set additionally when BOOT_ARCH_NUBUS is set.
+ */
+#define BOOT_ARCH_PCI 0x00000001UL
+#define BOOT_ARCH_NUBUS 0x00000002UL
+#define BOOT_ARCH_NUBUS_PDM 0x00000010UL
+#define BOOT_ARCH_NUBUS_PERFORMA 0x00000020UL
+#define BOOT_ARCH_NUBUS_POWERBOOK 0x00000040UL
+
+/* Maximum number of ranges in phys memory map */
+#define MAX_MEM_MAP_SIZE 26
+
+/* This is the format of an element in the physical memory map. Note that
+ the map is optional and current BootX will only build it for pre-PCI
+ machines */
+typedef struct boot_info_map_entry
+{
+ __u32 physAddr; /* Physical starting address */
+ __u32 size; /* Size in bytes */
+} boot_info_map_entry_t;
+
+
+/* Here are the boot informations that are passed to the bootstrap
+ * Note that the kernel arguments and the device tree are appended
+ * at the end of this structure. */
+typedef struct boot_infos
+{
+ /* Version of this structure */
+ __u32 version;
+ /* backward compatible down to version: */
+ __u32 compatible_version;
+
+ /* NEW (vers. 2) this holds the current _logical_ base addr of
+ the frame buffer (for use by early boot message) */
+ __u8* logicalDisplayBase;
+
+ /* NEW (vers. 4) Apple's machine identification */
+ __u32 machineID;
+
+ /* NEW (vers. 4) Detected hw architecture */
+ __u32 architecture;
+
+ /* The device tree (internal addresses relative to the beginning of the tree,
+ * device tree offset relative to the beginning of this structure).
+ * On pre-PCI macintosh (BOOT_ARCH_PCI bit set to 0 in architecture), this
+ * field is 0.
+ */
+ __u32 deviceTreeOffset; /* Device tree offset */
+ __u32 deviceTreeSize; /* Size of the device tree */
+
+ /* Some infos about the current MacOS display */
+ __u32 dispDeviceRect[4]; /* left,top,right,bottom */
+ __u32 dispDeviceDepth; /* (8, 16 or 32) */
+ __u8* dispDeviceBase; /* base address (physical) */
+ __u32 dispDeviceRowBytes; /* rowbytes (in bytes) */
+ __u32 dispDeviceColorsOffset; /* Colormap (8 bits only) or 0 (*) */
+ /* Optional offset in the registry to the current
+ * MacOS display. (Can be 0 when not detected) */
+ __u32 dispDeviceRegEntryOffset;
+
+ /* Optional pointer to boot ramdisk (offset from this structure) */
+ __u32 ramDisk;
+ __u32 ramDiskSize; /* size of ramdisk image */
+
+ /* Kernel command line arguments (offset from this structure) */
+ __u32 kernelParamsOffset;
+
+ /* ALL BELOW NEW (vers. 4) */
+
+ /* This defines the physical memory. Valid with BOOT_ARCH_NUBUS flag
+ (non-PCI) only. On PCI, memory is contiguous and it's size is in the
+ device-tree. */
+ boot_info_map_entry_t
+ physMemoryMap[MAX_MEM_MAP_SIZE]; /* Where the phys memory is */
+ __u32 physMemoryMapSize; /* How many entries in map */
+
+
+ /* The framebuffer size (optional, currently 0) */
+ __u32 frameBufferSize; /* Represents a max size, can be 0. */
+
+ /* NEW (vers. 5) */
+
+ /* Total params size (args + colormap + device tree + ramdisk) */
+ __u32 totalParamsSize;
+
+} boot_infos_t;
+
+#ifdef __KERNEL__
+/* (*) The format of the colormap is 256 * 3 * 2 bytes. Each color index
+ * is represented by 3 short words containing a 16 bits (unsigned) color
+ * component. Later versions may contain the gamma table for direct-color
+ * devices here.
+ */
+#define BOOTX_COLORTABLE_SIZE (256UL*3UL*2UL)
+
+/* BootX passes the device-tree using a format that comes from earlier
+ * ppc32 kernels. This used to match what is in prom.h, but not anymore
+ * so we now define it here
+ */
+struct bootx_dt_prop {
+ u32 name;
+ int length;
+ u32 value;
+ u32 next;
+};
+
+struct bootx_dt_node {
+ u32 unused0;
+ u32 unused1;
+ u32 phandle; /* not really available */
+ u32 unused2;
+ u32 unused3;
+ u32 unused4;
+ u32 unused5;
+ u32 full_name;
+ u32 properties;
+ u32 parent;
+ u32 child;
+ u32 sibling;
+ u32 next;
+ u32 allnext;
+};
+
+extern void bootx_init(unsigned long r4, unsigned long phys);
+
+#endif /* __KERNEL__ */
+
+#ifdef macintosh
+#pragma options align=reset
+#endif
+
+#endif
diff --git a/include/asm-powerpc/btext.h b/include/asm-powerpc/btext.h
index 71cce36bc630..906f46e31006 100644
--- a/include/asm-powerpc/btext.h
+++ b/include/asm-powerpc/btext.h
@@ -7,21 +7,22 @@
#define __PPC_BTEXT_H
#ifdef __KERNEL__
-extern void btext_clearscreen(void);
-extern void btext_flushscreen(void);
-
-extern int boot_text_mapped;
-
-extern int btext_initialize(struct device_node *np);
-
-extern void map_boot_text(void);
-extern void init_boot_display(void);
+extern int btext_find_display(int allow_nonstdout);
extern void btext_update_display(unsigned long phys, int width, int height,
int depth, int pitch);
+extern void btext_setup_display(int width, int height, int depth, int pitch,
+ unsigned long address);
+extern void btext_prepare_BAT(void);
+extern void btext_unmap(void);
extern void btext_drawchar(char c);
extern void btext_drawstring(const char *str);
extern void btext_drawhex(unsigned long v);
+extern void btext_drawtext(const char *c, unsigned int len);
+
+extern void btext_clearscreen(void);
+extern void btext_flushscreen(void);
+extern void btext_flushline(void);
#endif /* __KERNEL__ */
#endif /* __PPC_BTEXT_H */
diff --git a/include/asm-powerpc/bug.h b/include/asm-powerpc/bug.h
index b001ecb3cd99..99817a802ca4 100644
--- a/include/asm-powerpc/bug.h
+++ b/include/asm-powerpc/bug.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_BUG_H
#define _ASM_POWERPC_BUG_H
+#ifdef __KERNEL__
#include <asm/asm-compat.h>
/*
@@ -67,4 +68,5 @@ struct bug_entry *find_bug(unsigned long bugaddr);
#include <asm-generic/bug.h>
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_BUG_H */
diff --git a/include/asm-powerpc/checksum.h b/include/asm-powerpc/checksum.h
index d8354d8a49ce..609ecbbd7210 100644
--- a/include/asm-powerpc/checksum.h
+++ b/include/asm-powerpc/checksum.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_CHECKSUM_H
#define _ASM_POWERPC_CHECKSUM_H
+#ifdef __KERNEL__
/*
* This program is free software; you can redistribute it and/or
@@ -129,4 +130,5 @@ static inline unsigned long csum_tcpudp_nofold(unsigned long saddr,
}
#endif
+#endif /* __KERNEL__ */
#endif
diff --git a/include/asm-powerpc/compat.h b/include/asm-powerpc/compat.h
index 4db4360c4d4a..accb80c9a339 100644
--- a/include/asm-powerpc/compat.h
+++ b/include/asm-powerpc/compat.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_COMPAT_H
#define _ASM_POWERPC_COMPAT_H
+#ifdef __KERNEL__
/*
* Architecture specific compatibility types
*/
@@ -202,4 +203,5 @@ struct compat_shmid64_ds {
compat_ulong_t __unused6;
};
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_COMPAT_H */
diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h
index d1cfa3f515ea..ef6ead34a773 100644
--- a/include/asm-powerpc/cputable.h
+++ b/include/asm-powerpc/cputable.h
@@ -1,7 +1,6 @@
#ifndef __ASM_POWERPC_CPUTABLE_H
#define __ASM_POWERPC_CPUTABLE_H
-#include <linux/config.h>
#include <asm/asm-compat.h>
#define PPC_FEATURE_32 0x80000000
@@ -28,10 +27,17 @@
* via the mkdefs mechanism.
*/
struct cpu_spec;
-struct op_powerpc_model;
typedef void (*cpu_setup_t)(unsigned long offset, struct cpu_spec* spec);
+enum powerpc_oprofile_type {
+ INVALID = 0,
+ RS64 = 1,
+ POWER4 = 2,
+ G4 = 3,
+ BOOKE = 4,
+};
+
struct cpu_spec {
/* CPU is matched via (PVR & pvr_mask) == pvr_value */
unsigned int pvr_mask;
@@ -57,7 +63,7 @@ struct cpu_spec {
char *oprofile_cpu_type;
/* Processor specific oprofile operations */
- struct op_powerpc_model *oprofile_model;
+ enum powerpc_oprofile_type oprofile_type;
};
extern struct cpu_spec *cur_cpu_spec;
@@ -106,6 +112,7 @@ extern void do_cpu_ftr_fixups(unsigned long offset);
#define CPU_FTR_LOCKLESS_TLBIE ASM_CONST(0x0000040000000000)
#define CPU_FTR_MMCRA_SIHV ASM_CONST(0x0000080000000000)
#define CPU_FTR_CI_LARGE_PAGE ASM_CONST(0x0000100000000000)
+#define CPU_FTR_PAUSE_ZERO ASM_CONST(0x0000200000000000)
#else
/* ensure on 32b processors the flags are available for compiling but
* don't do anything */
@@ -305,12 +312,18 @@ enum {
CPU_FTR_MMCRA_SIHV,
CPU_FTRS_CELL = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 |
- CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT,
+ CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT |
+ CPU_FTR_CTRL | CPU_FTR_PAUSE_ZERO,
CPU_FTRS_COMPATIBLE = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2,
#endif
CPU_FTRS_POSSIBLE =
+#ifdef __powerpc64__
+ CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 |
+ CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_CELL |
+ CPU_FTR_CI_LARGE_PAGE |
+#else
#if CLASSIC_PPC
CPU_FTRS_PPC601 | CPU_FTRS_603 | CPU_FTRS_604 | CPU_FTRS_740_NOTAU |
CPU_FTRS_740 | CPU_FTRS_750 | CPU_FTRS_750FX1 |
@@ -344,14 +357,14 @@ enum {
#ifdef CONFIG_E500
CPU_FTRS_E500 | CPU_FTRS_E500_2 |
#endif
-#ifdef __powerpc64__
- CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 |
- CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_CELL |
- CPU_FTR_CI_LARGE_PAGE |
-#endif
+#endif /* __powerpc64__ */
0,
CPU_FTRS_ALWAYS =
+#ifdef __powerpc64__
+ CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 &
+ CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_CELL &
+#else
#if CLASSIC_PPC
CPU_FTRS_PPC601 & CPU_FTRS_603 & CPU_FTRS_604 & CPU_FTRS_740_NOTAU &
CPU_FTRS_740 & CPU_FTRS_750 & CPU_FTRS_750FX1 &
@@ -385,10 +398,7 @@ enum {
#ifdef CONFIG_E500
CPU_FTRS_E500 & CPU_FTRS_E500_2 &
#endif
-#ifdef __powerpc64__
- CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 &
- CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_CELL &
-#endif
+#endif /* __powerpc64__ */
CPU_FTRS_POSSIBLE,
};
diff --git a/include/asm-powerpc/current.h b/include/asm-powerpc/current.h
index 82cd4a9ca99a..1938d6abd255 100644
--- a/include/asm-powerpc/current.h
+++ b/include/asm-powerpc/current.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_CURRENT_H
#define _ASM_POWERPC_CURRENT_H
+#ifdef __KERNEL__
/*
* This program is free software; you can redistribute it and/or
@@ -24,4 +25,5 @@ register struct task_struct *current asm ("r2");
#endif
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_CURRENT_H */
diff --git a/include/asm-powerpc/delay.h b/include/asm-powerpc/delay.h
index 54fe1f4f8fd0..057a60955474 100644
--- a/include/asm-powerpc/delay.h
+++ b/include/asm-powerpc/delay.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_DELAY_H
#define _ASM_POWERPC_DELAY_H
+#ifdef __KERNEL__
/*
* Copyright 1996, Paul Mackerras.
@@ -16,4 +17,5 @@
extern void __delay(unsigned long loops);
extern void udelay(unsigned long usecs);
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_DELAY_H */
diff --git a/include/asm-powerpc/dma-mapping.h b/include/asm-powerpc/dma-mapping.h
index a96e5742ca32..837756ab7dc7 100644
--- a/include/asm-powerpc/dma-mapping.h
+++ b/include/asm-powerpc/dma-mapping.h
@@ -6,6 +6,7 @@
*/
#ifndef _ASM_DMA_MAPPING_H
#define _ASM_DMA_MAPPING_H
+#ifdef __KERNEL__
#include <linux/config.h>
#include <linux/types.h>
@@ -282,4 +283,5 @@ struct dma_mapping_ops {
int (*dac_dma_supported)(struct device *dev, u64 mask);
};
+#endif /* __KERNEL__ */
#endif /* _ASM_DMA_MAPPING_H */
diff --git a/include/asm-powerpc/dma.h b/include/asm-powerpc/dma.h
index 926378d2cd94..4bb57fe37097 100644
--- a/include/asm-powerpc/dma.h
+++ b/include/asm-powerpc/dma.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_DMA_H
#define _ASM_POWERPC_DMA_H
+#ifdef __KERNEL__
/*
* Defines for using and allocating dma channels.
@@ -387,4 +388,5 @@ extern int isa_dma_bridge_buggy;
#endif /* !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI) */
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_DMA_H */
diff --git a/include/asm-powerpc/eeh.h b/include/asm-powerpc/eeh.h
index f8633aafe4ba..4395b7bc1ed4 100644
--- a/include/asm-powerpc/eeh.h
+++ b/include/asm-powerpc/eeh.h
@@ -19,6 +19,7 @@
#ifndef _PPC64_EEH_H
#define _PPC64_EEH_H
+#ifdef __KERNEL__
#include <linux/config.h>
#include <linux/init.h>
@@ -57,6 +58,7 @@ void __init pci_addr_cache_build(void);
* to finish the eeh setup for this device.
*/
void eeh_add_device_early(struct device_node *);
+void eeh_add_device_tree_early(struct device_node *);
void eeh_add_device_late(struct pci_dev *);
/**
@@ -72,6 +74,15 @@ void eeh_add_device_late(struct pci_dev *);
void eeh_remove_device(struct pci_dev *);
/**
+ * eeh_remove_device_recursive - undo EEH for device & children.
+ * @dev: pci device to be removed
+ *
+ * As above, this removes the device; it also removes child
+ * pci devices as well.
+ */
+void eeh_remove_bus_device(struct pci_dev *);
+
+/**
* EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
*
* If this macro yields TRUE, the caller relays to eeh_check_failure()
@@ -107,6 +118,9 @@ static inline void eeh_add_device_late(struct pci_dev *dev) { }
static inline void eeh_remove_device(struct pci_dev *dev) { }
+static inline void eeh_add_device_tree_early(struct device_node *dn) { }
+
+static inline void eeh_remove_bus_device(struct pci_dev *dev) { }
#define EEH_POSSIBLE_ERROR(val, type) (0)
#define EEH_IO_ERROR_VALUE(size) (-1UL)
#endif /* CONFIG_EEH */
@@ -363,4 +377,5 @@ static inline void eeh_insl_ns(unsigned long port, void * buf, int nl)
eeh_check_failure((void __iomem *)(port), *(u32*)buf);
}
+#endif /* __KERNEL__ */
#endif /* _PPC64_EEH_H */
diff --git a/include/asm-powerpc/eeh_event.h b/include/asm-powerpc/eeh_event.h
index d168a30b3866..5e11a00b6fa0 100644
--- a/include/asm-powerpc/eeh_event.h
+++ b/include/asm-powerpc/eeh_event.h
@@ -20,6 +20,7 @@
#ifndef ASM_PPC64_EEH_EVENT_H
#define ASM_PPC64_EEH_EVENT_H
+#ifdef __KERNEL__
/** EEH event -- structure holding pci controller data that describes
* a change in the isolation status of a PCI slot. A pointer
@@ -49,4 +50,5 @@ int eeh_send_failure_event (struct device_node *dn,
int reset_state,
int time_unavail);
+#endif /* __KERNEL__ */
#endif /* ASM_PPC64_EEH_EVENT_H */
diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h
index 3dcd65edf978..c5a635d9bba4 100644
--- a/include/asm-powerpc/elf.h
+++ b/include/asm-powerpc/elf.h
@@ -1,7 +1,10 @@
#ifndef _ASM_POWERPC_ELF_H
#define _ASM_POWERPC_ELF_H
+#ifdef __KERNEL__
#include <linux/sched.h> /* for task_struct */
+#endif
+
#include <asm/types.h>
#include <asm/ptrace.h>
#include <asm/cputable.h>
diff --git a/include/asm-powerpc/firmware.h b/include/asm-powerpc/firmware.h
index 12fabbcb04f0..f804b34cf06a 100644
--- a/include/asm-powerpc/firmware.h
+++ b/include/asm-powerpc/firmware.h
@@ -98,6 +98,12 @@ typedef struct {
extern firmware_feature_t firmware_features_table[];
#endif
+extern void system_reset_fwnmi(void);
+extern void machine_check_fwnmi(void);
+
+/* This is true if we are using the firmware NMI handler (typically LPAR) */
+extern int fwnmi_active;
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* __ASM_POWERPC_FIRMWARE_H */
diff --git a/include/asm-powerpc/floppy.h b/include/asm-powerpc/floppy.h
index 64276a3f6153..e258778ca429 100644
--- a/include/asm-powerpc/floppy.h
+++ b/include/asm-powerpc/floppy.h
@@ -9,6 +9,7 @@
*/
#ifndef __ASM_POWERPC_FLOPPY_H
#define __ASM_POWERPC_FLOPPY_H
+#ifdef __KERNEL__
#include <linux/config.h>
#include <asm/machdep.h>
@@ -102,4 +103,5 @@ static int FDC2 = -1;
#define EXTRA_FLOPPY_PARAMS
+#endif /* __KERNEL__ */
#endif /* __ASM_POWERPC_FLOPPY_H */
diff --git a/include/asm-powerpc/grackle.h b/include/asm-powerpc/grackle.h
index 563c7a5e64c9..bd7812a519d4 100644
--- a/include/asm-powerpc/grackle.h
+++ b/include/asm-powerpc/grackle.h
@@ -1,3 +1,6 @@
+#ifndef _ASM_POWERPC_GRACKLE_H
+#define _ASM_POWERPC_GRACKLE_H
+#ifdef __KERNEL__
/*
* Functions for setting up and using a MPC106 northbridge
*/
@@ -5,3 +8,5 @@
#include <asm/pci-bridge.h>
extern void setup_grackle(struct pci_controller *hose);
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_GRACKLE_H */
diff --git a/include/asm-powerpc/hardirq.h b/include/asm-powerpc/hardirq.h
index 3b3e3b49ec12..288e14d53b7f 100644
--- a/include/asm-powerpc/hardirq.h
+++ b/include/asm-powerpc/hardirq.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_HARDIRQ_H
#define _ASM_POWERPC_HARDIRQ_H
+#ifdef __KERNEL__
#include <asm/irq.h>
#include <asm/bug.h>
@@ -24,4 +25,5 @@ static inline void ack_bad_irq(int irq)
BUG();
}
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_HARDIRQ_H */
diff --git a/include/asm-powerpc/heathrow.h b/include/asm-powerpc/heathrow.h
index 22ac179856b9..93f54958a9d1 100644
--- a/include/asm-powerpc/heathrow.h
+++ b/include/asm-powerpc/heathrow.h
@@ -1,3 +1,6 @@
+#ifndef _ASM_POWERPC_HEATHROW_H
+#define _ASM_POWERPC_HEATHROW_H
+#ifdef __KERNEL__
/*
* heathrow.h: definitions for using the "Heathrow" I/O controller chip.
*
@@ -60,3 +63,5 @@
/* Looks like Heathrow has some sort of GPIOs as well... */
#define HRW_GPIO_MODEM_RESET 0x6d
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_HEATHROW_H */
diff --git a/include/asm-powerpc/hvcall.h b/include/asm-powerpc/hvcall.h
index d36da61dbc53..da7af5a720e0 100644
--- a/include/asm-powerpc/hvcall.h
+++ b/include/asm-powerpc/hvcall.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_HVCALL_H
#define _ASM_POWERPC_HVCALL_H
+#ifdef __KERNEL__
#define HVSC .long 0x44000022
@@ -170,4 +171,5 @@ long plpar_hcall_4out(unsigned long opcode,
unsigned long *out4);
#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_HVCALL_H */
diff --git a/include/asm-powerpc/hvconsole.h b/include/asm-powerpc/hvconsole.h
index 6da93ce74dc0..34daf7b9b62f 100644
--- a/include/asm-powerpc/hvconsole.h
+++ b/include/asm-powerpc/hvconsole.h
@@ -21,6 +21,7 @@
#ifndef _PPC64_HVCONSOLE_H
#define _PPC64_HVCONSOLE_H
+#ifdef __KERNEL__
/*
* This is the max number of console adapters that can/will be found as
@@ -46,4 +47,5 @@ extern struct hvc_struct * __devinit hvc_alloc(uint32_t vtermno, int irq,
struct hv_ops *ops);
/* remove a vterm from hvc tty operation (modele_exit or hotplug remove) */
extern int __devexit hvc_remove(struct hvc_struct *hp);
+#endif /* __KERNEL__ */
#endif /* _PPC64_HVCONSOLE_H */
diff --git a/include/asm-powerpc/hvcserver.h b/include/asm-powerpc/hvcserver.h
index aecba9665796..67d7da3a4da4 100644
--- a/include/asm-powerpc/hvcserver.h
+++ b/include/asm-powerpc/hvcserver.h
@@ -21,6 +21,7 @@
#ifndef _PPC64_HVCSERVER_H
#define _PPC64_HVCSERVER_H
+#ifdef __KERNEL__
#include <linux/list.h>
@@ -54,4 +55,5 @@ extern int hvcs_register_connection(uint32_t unit_address,
uint32_t p_partition_ID, uint32_t p_unit_address);
extern int hvcs_free_connection(uint32_t unit_address);
+#endif /* __KERNEL__ */
#endif /* _PPC64_HVCSERVER_H */
diff --git a/include/asm-powerpc/i8259.h b/include/asm-powerpc/i8259.h
index fc4bfee124d7..0392159e16e4 100644
--- a/include/asm-powerpc/i8259.h
+++ b/include/asm-powerpc/i8259.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_I8259_H
#define _ASM_POWERPC_I8259_H
+#ifdef __KERNEL__
#include <linux/irq.h>
@@ -9,4 +10,5 @@ extern void i8259_init(unsigned long intack_addr, int offset);
extern int i8259_irq(struct pt_regs *regs);
extern int i8259_irq_cascade(struct pt_regs *regs, void *unused);
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_I8259_H */
diff --git a/include/asm-powerpc/ibmebus.h b/include/asm-powerpc/ibmebus.h
new file mode 100644
index 000000000000..7a42723d107c
--- /dev/null
+++ b/include/asm-powerpc/ibmebus.h
@@ -0,0 +1,85 @@
+/*
+ * IBM PowerPC eBus Infrastructure Support.
+ *
+ * Copyright (c) 2005 IBM Corporation
+ * Heiko J Schick <schickhj@de.ibm.com>
+ *
+ * All rights reserved.
+ *
+ * This source code is distributed under a dual license of GPL v2.0 and OpenIB
+ * BSD.
+ *
+ * OpenIB BSD License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_EBUS_H
+#define _ASM_EBUS_H
+#ifdef __KERNEL__
+
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/mod_devicetable.h>
+#include <asm/of_device.h>
+
+extern struct dma_mapping_ops ibmebus_dma_ops;
+extern struct bus_type ibmebus_bus_type;
+
+struct ibmebus_dev {
+ char *name;
+ struct of_device ofdev;
+};
+
+struct ibmebus_driver {
+ char *name;
+ struct of_device_id *id_table;
+ int (*probe) (struct ibmebus_dev *dev, const struct of_device_id *id);
+ int (*remove) (struct ibmebus_dev *dev);
+ struct device_driver driver;
+};
+
+int ibmebus_register_driver(struct ibmebus_driver *drv);
+void ibmebus_unregister_driver(struct ibmebus_driver *drv);
+
+int ibmebus_request_irq(struct ibmebus_dev *dev,
+ u32 ist,
+ irqreturn_t (*handler)(int, void*, struct pt_regs *),
+ unsigned long irq_flags, const char * devname,
+ void *dev_id);
+void ibmebus_free_irq(struct ibmebus_dev *dev, u32 ist, void *dev_id);
+
+static inline struct ibmebus_driver *to_ibmebus_driver(struct device_driver *drv)
+{
+ return container_of(drv, struct ibmebus_driver, driver);
+}
+
+static inline struct ibmebus_dev *to_ibmebus_dev(struct device *dev)
+{
+ return container_of(dev, struct ibmebus_dev, ofdev.dev);
+}
+
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_IBMEBUS_H */
diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h
index 48938d84d055..68efbea379c9 100644
--- a/include/asm-powerpc/io.h
+++ b/include/asm-powerpc/io.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_IO_H
#define _ASM_POWERPC_IO_H
+#ifdef __KERNEL__
/*
* This program is free software; you can redistribute it and/or
@@ -186,7 +187,6 @@ extern void _outsl_ns(volatile u32 __iomem *port, const void *buf, int nl);
#define IO_SPACE_LIMIT ~(0UL)
-#ifdef __KERNEL__
extern int __ioremap_explicit(unsigned long p_addr, unsigned long v_addr,
unsigned long size, unsigned long flags);
extern void __iomem *__ioremap(unsigned long address, unsigned long size,
@@ -256,8 +256,6 @@ static inline void * phys_to_virt(unsigned long address)
*/
#define BIO_VMERGE_BOUNDARY 0
-#endif /* __KERNEL__ */
-
static inline void iosync(void)
{
__asm__ __volatile__ ("sync" : : : "memory");
@@ -405,8 +403,6 @@ static inline void out_be64(volatile unsigned long __iomem *addr, unsigned long
#include <asm/eeh.h>
#endif
-#ifdef __KERNEL__
-
/**
* check_signature - find BIOS signatures
* @io_addr: mmio address to check
diff --git a/include/asm-powerpc/iommu.h b/include/asm-powerpc/iommu.h
index f89f06050893..8a8393e50774 100644
--- a/include/asm-powerpc/iommu.h
+++ b/include/asm-powerpc/iommu.h
@@ -20,6 +20,7 @@
#ifndef _ASM_IOMMU_H
#define _ASM_IOMMU_H
+#ifdef __KERNEL__
#include <linux/config.h>
#include <asm/types.h>
@@ -56,7 +57,7 @@ struct device_node;
/* Walks all buses and creates iommu tables */
extern void iommu_setup_pSeries(void);
-extern void iommu_setup_u3(void);
+extern void iommu_setup_dart(void);
/* Frees table for an individual device node */
extern void iommu_free_table(struct device_node *dn);
@@ -104,7 +105,7 @@ extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
extern void iommu_init_early_pSeries(void);
extern void iommu_init_early_iSeries(void);
-extern void iommu_init_early_u3(void);
+extern void iommu_init_early_dart(void);
#ifdef CONFIG_PCI
extern void pci_iommu_init(void);
@@ -113,6 +114,7 @@ extern void pci_direct_iommu_init(void);
static inline void pci_iommu_init(void) { }
#endif
-extern void alloc_u3_dart_table(void);
+extern void alloc_dart_table(void);
+#endif /* __KERNEL__ */
#endif /* _ASM_IOMMU_H */
diff --git a/include/asm-ppc/ipic.h b/include/asm-powerpc/ipic.h
index 0fe396a2b666..0fe396a2b666 100644
--- a/include/asm-ppc/ipic.h
+++ b/include/asm-powerpc/ipic.h
diff --git a/include/asm-powerpc/iseries/it_lp_reg_save.h b/include/asm-powerpc/iseries/it_lp_reg_save.h
index 288044b702de..81824e1bb767 100644
--- a/include/asm-powerpc/iseries/it_lp_reg_save.h
+++ b/include/asm-powerpc/iseries/it_lp_reg_save.h
@@ -81,4 +81,6 @@ struct ItLpRegSave {
u8 xRsvd3[176]; // Reserved 350-3FF
};
+extern struct ItLpRegSave iseries_reg_save[];
+
#endif /* _ITLPREGSAVE_H */
diff --git a/include/asm-powerpc/kdebug.h b/include/asm-powerpc/kdebug.h
index 9dcbac674811..7c16265568e0 100644
--- a/include/asm-powerpc/kdebug.h
+++ b/include/asm-powerpc/kdebug.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_KDEBUG_H
#define _ASM_POWERPC_KDEBUG_H
+#ifdef __KERNEL__
/* nearly identical to x86_64/i386 code */
@@ -39,4 +40,5 @@ static inline int notify_die(enum die_val val,char *str,struct pt_regs *regs,lon
return notifier_call_chain(&powerpc_die_chain, val, &args);
}
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_KDEBUG_H */
diff --git a/include/asm-powerpc/kdump.h b/include/asm-powerpc/kdump.h
new file mode 100644
index 000000000000..a87aed00d61f
--- /dev/null
+++ b/include/asm-powerpc/kdump.h
@@ -0,0 +1,13 @@
+#ifndef _PPC64_KDUMP_H
+#define _PPC64_KDUMP_H
+
+/* How many bytes to reserve at zero for kdump. The reserve limit should
+ * be greater or equal to the trampoline's end address. */
+#define KDUMP_RESERVE_LIMIT 0x8000
+
+#define KDUMP_TRAMPOLINE_START 0x0100
+#define KDUMP_TRAMPOLINE_END 0x3000
+
+extern void kdump_setup(void);
+
+#endif /* __PPC64_KDUMP_H */
diff --git a/include/asm-powerpc/kexec.h b/include/asm-powerpc/kexec.h
index c72ffc709ea8..4263af3cadfd 100644
--- a/include/asm-powerpc/kexec.h
+++ b/include/asm-powerpc/kexec.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_KEXEC_H
#define _ASM_POWERPC_KEXEC_H
+#ifdef __KERNEL__
/*
* Maximum page that is mapped directly into kernel memory.
@@ -30,8 +31,12 @@
#define KEXEC_ARCH KEXEC_ARCH_PPC
#endif
+#define HAVE_ARCH_COPY_OLDMEM_PAGE
+
#ifndef __ASSEMBLY__
+#ifdef CONFIG_KEXEC
+
#define MAX_NOTE_BYTES 1024
typedef u32 note_buf_t[MAX_NOTE_BYTES / sizeof(u32)];
@@ -41,10 +46,18 @@ extern note_buf_t crash_notes[];
extern void kexec_smp_wait(void); /* get and clear naca physid, wait for
master to copy new code to 0 */
extern void __init kexec_setup(void);
-#else
+extern int crashing_cpu;
+extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *));
+#endif /* __powerpc64 __ */
+
struct kimage;
-extern void machine_kexec_simple(struct kimage *image);
-#endif
+struct pt_regs;
+extern void default_machine_kexec(struct kimage *image);
+extern int default_machine_kexec_prepare(struct kimage *image);
+extern void default_machine_crash_shutdown(struct pt_regs *regs);
+
+#endif /* !CONFIG_KEXEC */
#endif /* ! __ASSEMBLY__ */
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_KEXEC_H */
diff --git a/include/asm-powerpc/keylargo.h b/include/asm-powerpc/keylargo.h
index a669a3f0f5a2..d8520ef121f9 100644
--- a/include/asm-powerpc/keylargo.h
+++ b/include/asm-powerpc/keylargo.h
@@ -1,3 +1,6 @@
+#ifndef _ASM_POWERPC_KEYLARGO_H
+#define _ASM_POWERPC_KEYLARGO_H
+#ifdef __KERNEL__
/*
* keylargo.h: definitions for using the "KeyLargo" I/O controller chip.
*
@@ -232,10 +235,12 @@
#define K2_FCR1_I2S0_RESET 0x00000800
#define K2_FCR1_I2S0_CLK_ENABLE_BIT 0x00001000
#define K2_FCR1_I2S0_ENABLE 0x00002000
-
#define K2_FCR1_PCI1_CLK_ENABLE 0x00004000
#define K2_FCR1_FW_CLK_ENABLE 0x00008000
#define K2_FCR1_FW_RESET_N 0x00010000
+#define K2_FCR1_I2S1_CELL_ENABLE 0x00020000
+#define K2_FCR1_I2S1_CLK_ENABLE_BIT 0x00080000
+#define K2_FCR1_I2S1_ENABLE 0x00100000
#define K2_FCR1_GMAC_CLK_ENABLE 0x00400000
#define K2_FCR1_GMAC_POWER_DOWN 0x00800000
#define K2_FCR1_GMAC_RESET_N 0x01000000
@@ -246,3 +251,11 @@
#define K2_FCR1_UATA_RESET_N 0x40000000
#define K2_FCR1_UATA_CHOOSE_CLK66 0x80000000
+/* Shasta definitions */
+#define SH_FCR1_I2S2_CELL_ENABLE 0x00000010
+#define SH_FCR1_I2S2_CLK_ENABLE_BIT 0x00000040
+#define SH_FCR1_I2S2_ENABLE 0x00000080
+#define SH_FCR3_I2S2_CLK18_ENABLE 0x00008000
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_KEYLARGO_H */
diff --git a/include/asm-powerpc/kprobes.h b/include/asm-powerpc/kprobes.h
index 6cd0a3bfa280..0654f79b06df 100644
--- a/include/asm-powerpc/kprobes.h
+++ b/include/asm-powerpc/kprobes.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_KPROBES_H
#define _ASM_POWERPC_KPROBES_H
+#ifdef __KERNEL__
/*
* Kernel Probes (KProbes)
*
@@ -78,4 +79,5 @@ static inline int kprobe_exceptions_notify(struct notifier_block *self,
return 0;
}
#endif
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_KPROBES_H */
diff --git a/include/asm-powerpc/lmb.h b/include/asm-powerpc/lmb.h
index ea0afe343545..d3546c4c9f46 100644
--- a/include/asm-powerpc/lmb.h
+++ b/include/asm-powerpc/lmb.h
@@ -1,5 +1,6 @@
#ifndef _PPC64_LMB_H
#define _PPC64_LMB_H
+#ifdef __KERNEL__
/*
* Definitions for talking to the Open Firmware PROM on
@@ -78,4 +79,5 @@ lmb_end_pfn(struct lmb_region *type, unsigned long region_nr)
lmb_size_pages(type, region_nr);
}
+#endif /* __KERNEL__ */
#endif /* _PPC64_LMB_H */
diff --git a/include/asm-powerpc/lppaca.h b/include/asm-powerpc/lppaca.h
index c1bedab1515b..ff82ea7c4829 100644
--- a/include/asm-powerpc/lppaca.h
+++ b/include/asm-powerpc/lppaca.h
@@ -18,6 +18,7 @@
*/
#ifndef _ASM_POWERPC_LPPACA_H
#define _ASM_POWERPC_LPPACA_H
+#ifdef __KERNEL__
//=============================================================================
//
@@ -128,4 +129,5 @@ struct lppaca {
u8 pmc_save_area[256]; // PMC interrupt Area x00-xFF
};
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_LPPACA_H */
diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h
index c011abb8b600..5348b820788c 100644
--- a/include/asm-powerpc/machdep.h
+++ b/include/asm-powerpc/machdep.h
@@ -27,6 +27,9 @@ struct device_node;
struct iommu_table;
struct rtc_time;
struct file;
+#ifdef CONFIG_KEXEC
+struct kimage;
+#endif
#ifdef CONFIG_SMP
struct smp_ops_t {
@@ -131,7 +134,7 @@ struct machdep_calls {
void (*nvram_sync)(void);
/* Exception handlers */
- void (*system_reset_exception)(struct pt_regs *regs);
+ int (*system_reset_exception)(struct pt_regs *regs);
int (*machine_check_exception)(struct pt_regs *regs);
/* Motherboard/chipset features. This is a kind of general purpose
@@ -207,19 +210,19 @@ struct machdep_calls {
/* this is for modules, since _machine can be a define -- Cort */
int ppc_machine;
+#endif /* CONFIG_PPC32 */
-#ifdef CONFIG_KEXEC
/* Called to shutdown machine specific hardware not already controlled
* by other drivers.
- * XXX Should we move this one out of kexec scope?
*/
void (*machine_shutdown)(void);
+#ifdef CONFIG_KEXEC
/* Called to do the minimal shutdown needed to run a kexec'd kernel
* to run successfully.
* XXX Should we move this one out of kexec scope?
*/
- void (*machine_crash_shutdown)(void);
+ void (*machine_crash_shutdown)(struct pt_regs *regs);
/* Called to do what every setup is needed on image and the
* reboot code buffer. Returns 0 on success.
@@ -237,7 +240,6 @@ struct machdep_calls {
*/
void (*machine_kexec)(struct kimage *image);
#endif /* CONFIG_KEXEC */
-#endif /* CONFIG_PPC32 */
};
extern void default_idle(void);
diff --git a/include/asm-powerpc/macio.h b/include/asm-powerpc/macio.h
index b553dd4b139e..3a6cb1a513b7 100644
--- a/include/asm-powerpc/macio.h
+++ b/include/asm-powerpc/macio.h
@@ -1,5 +1,6 @@
#ifndef __MACIO_ASIC_H__
#define __MACIO_ASIC_H__
+#ifdef __KERNEL__
#include <asm/of_device.h>
@@ -137,4 +138,5 @@ struct macio_driver
extern int macio_register_driver(struct macio_driver *);
extern void macio_unregister_driver(struct macio_driver *);
+#endif /* __KERNEL__ */
#endif /* __MACIO_ASIC_H__ */
diff --git a/include/asm-powerpc/mmu.h b/include/asm-powerpc/mmu.h
index 29b0bb0086d3..d096d9e76ad7 100644
--- a/include/asm-powerpc/mmu.h
+++ b/include/asm-powerpc/mmu.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_MMU_H_
#define _ASM_POWERPC_MMU_H_
+#ifdef __KERNEL__
#ifndef CONFIG_PPC64
#include <asm-ppc/mmu.h>
@@ -33,7 +34,8 @@
/* Location of cpu0's segment table */
#define STAB0_PAGE 0x6
-#define STAB0_PHYS_ADDR (STAB0_PAGE<<12)
+#define STAB0_OFFSET (STAB0_PAGE << 12)
+#define STAB0_PHYS_ADDR (STAB0_OFFSET + PHYSICAL_START)
#ifndef __ASSEMBLY__
extern char initial_stab[];
@@ -394,7 +396,12 @@ static inline unsigned long get_vsid(unsigned long context, unsigned long ea)
#define VSID_SCRAMBLE(pvsid) (((pvsid) * VSID_MULTIPLIER) % VSID_MODULUS)
#define KERNEL_VSID(ea) VSID_SCRAMBLE(GET_ESID(ea))
+/* Physical address used by some IO functions */
+typedef unsigned long phys_addr_t;
+
+
#endif /* __ASSEMBLY */
#endif /* CONFIG_PPC64 */
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_MMU_H_ */
diff --git a/include/asm-powerpc/mmu_context.h b/include/asm-powerpc/mmu_context.h
index ea6798c7d5fc..1b8a25fd48f3 100644
--- a/include/asm-powerpc/mmu_context.h
+++ b/include/asm-powerpc/mmu_context.h
@@ -1,5 +1,6 @@
#ifndef __ASM_POWERPC_MMU_CONTEXT_H
#define __ASM_POWERPC_MMU_CONTEXT_H
+#ifdef __KERNEL__
#ifndef CONFIG_PPC64
#include <asm-ppc/mmu_context.h>
@@ -86,4 +87,5 @@ static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
}
#endif /* CONFIG_PPC64 */
+#endif /* __KERNEL__ */
#endif /* __ASM_POWERPC_MMU_CONTEXT_H */
diff --git a/include/asm-powerpc/mmzone.h b/include/asm-powerpc/mmzone.h
index 54958d6cae04..88d70bae7769 100644
--- a/include/asm-powerpc/mmzone.h
+++ b/include/asm-powerpc/mmzone.h
@@ -6,6 +6,7 @@
*/
#ifndef _ASM_MMZONE_H_
#define _ASM_MMZONE_H_
+#ifdef __KERNEL__
#include <linux/config.h>
@@ -47,4 +48,5 @@ extern unsigned long max_pfn;
extern int __init early_pfn_to_nid(unsigned long pfn);
#endif
+#endif /* __KERNEL__ */
#endif /* _ASM_MMZONE_H_ */
diff --git a/include/asm-powerpc/module.h b/include/asm-powerpc/module.h
index 7ecd05e03051..584fabfb4f08 100644
--- a/include/asm-powerpc/module.h
+++ b/include/asm-powerpc/module.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_MODULE_H
#define _ASM_POWERPC_MODULE_H
+#ifdef __KERNEL__
/*
* This program is free software; you can redistribute it and/or
@@ -74,4 +75,5 @@ struct exception_table_entry;
void sort_ex_table(struct exception_table_entry *start,
struct exception_table_entry *finish);
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_MODULE_H */
diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h
index 7083d1f74260..6b9e78142f4f 100644
--- a/include/asm-powerpc/mpic.h
+++ b/include/asm-powerpc/mpic.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_MPIC_H
#define _ASM_POWERPC_MPIC_H
+#ifdef __KERNEL__
#include <linux/irq.h>
@@ -117,7 +118,9 @@ typedef int (*mpic_cascade_t)(struct pt_regs *regs, void *data);
struct mpic_irq_fixup
{
u8 __iomem *base;
- unsigned int irq;
+ u8 __iomem *applebase;
+ u32 data;
+ unsigned int index;
};
#endif /* CONFIG_MPIC_BROKEN_U3 */
@@ -284,4 +287,5 @@ extern int mpic_get_irq(struct pt_regs *regs);
/* global mpic for pSeries */
extern struct mpic *pSeries_mpic;
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_MPIC_H */
diff --git a/include/asm-powerpc/numnodes.h b/include/asm-powerpc/numnodes.h
index 795533aca095..e138edae09dd 100644
--- a/include/asm-powerpc/numnodes.h
+++ b/include/asm-powerpc/numnodes.h
@@ -1,7 +1,9 @@
#ifndef _ASM_POWERPC_MAX_NUMNODES_H
#define _ASM_POWERPC_MAX_NUMNODES_H
+#ifdef __KERNEL__
/* Max 16 Nodes */
#define NODES_SHIFT 4
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_MAX_NUMNODES_H */
diff --git a/include/asm-powerpc/nvram.h b/include/asm-powerpc/nvram.h
index 24bd8c2388ea..f3563e11e260 100644
--- a/include/asm-powerpc/nvram.h
+++ b/include/asm-powerpc/nvram.h
@@ -55,6 +55,7 @@ struct nvram_header {
char name[12];
};
+#ifdef __KERNEL__
struct nvram_partition {
struct list_head partition;
struct nvram_header header;
@@ -69,6 +70,7 @@ extern struct nvram_partition *nvram_find_partition(int sig, const char *name);
extern int pSeries_nvram_init(void);
extern int mmio_nvram_init(void);
+#endif /* __KERNEL__ */
/* PowerMac specific nvram stuffs */
@@ -78,6 +80,7 @@ enum {
pmac_nvram_NR /* MacOS Name Registry partition */
};
+#ifdef __KERNEL__
/* Return partition offset in nvram */
extern int pmac_get_partition(int partition);
@@ -91,6 +94,7 @@ extern void nvram_sync(void);
/* Normal access to NVRAM */
extern unsigned char nvram_read_byte(int i);
extern void nvram_write_byte(unsigned char c, int i);
+#endif
/* Some offsets in XPRAM */
#define PMAC_XPRAM_MACHINE_LOC 0xe4
diff --git a/include/asm-powerpc/of_device.h b/include/asm-powerpc/of_device.h
index ddb16aae0bd6..6249a7c39639 100644
--- a/include/asm-powerpc/of_device.h
+++ b/include/asm-powerpc/of_device.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_OF_DEVICE_H
#define _ASM_POWERPC_OF_DEVICE_H
+#ifdef __KERNEL__
#include <linux/device.h>
#include <linux/mod_devicetable.h>
@@ -61,4 +62,5 @@ extern struct of_device *of_platform_device_create(struct device_node *np,
struct device *parent);
extern void of_release_dev(struct device *dev);
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_OF_DEVICE_H */
diff --git a/include/asm-powerpc/ohare.h b/include/asm-powerpc/ohare.h
index 023b59772231..0d030f9dea24 100644
--- a/include/asm-powerpc/ohare.h
+++ b/include/asm-powerpc/ohare.h
@@ -1,3 +1,6 @@
+#ifndef _ASM_POWERPC_OHARE_H
+#define _ASM_POWERPC_OHARE_H
+#ifdef __KERNEL__
/*
* ohare.h: definitions for using the "O'Hare" I/O controller chip.
*
@@ -46,3 +49,6 @@
* Contributed by Harry Eaton.
*/
#define STARMAX_FEATURES 0xbeff7a
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_OHARE_H */
diff --git a/include/asm-powerpc/oprofile_impl.h b/include/asm-powerpc/oprofile_impl.h
index 8013cd273ced..338e6a7cff4a 100644
--- a/include/asm-powerpc/oprofile_impl.h
+++ b/include/asm-powerpc/oprofile_impl.h
@@ -11,6 +11,7 @@
#ifndef _ASM_POWERPC_OPROFILE_IMPL_H
#define _ASM_POWERPC_OPROFILE_IMPL_H
+#ifdef __KERNEL__
#define OP_MAX_COUNTER 8
@@ -22,24 +23,22 @@ struct op_counter_config {
unsigned long enabled;
unsigned long event;
unsigned long count;
+ /* Classic doesn't support per-counter user/kernel selection */
unsigned long kernel;
-#ifdef __powerpc64__
- /* We dont support per counter user/kernel selection */
-#endif
unsigned long user;
unsigned long unit_mask;
};
/* System-wide configuration as set via oprofilefs. */
struct op_system_config {
-#ifdef __powerpc64__
+#ifdef CONFIG_PPC64
unsigned long mmcr0;
unsigned long mmcr1;
unsigned long mmcra;
#endif
unsigned long enable_kernel;
unsigned long enable_user;
-#ifdef __powerpc64__
+#ifdef CONFIG_PPC64
unsigned long backtrace_spinlocks;
#endif
};
@@ -49,9 +48,7 @@ struct op_powerpc_model {
void (*reg_setup) (struct op_counter_config *,
struct op_system_config *,
int num_counters);
-#ifdef __powerpc64__
void (*cpu_setup) (void *);
-#endif
void (*start) (struct op_counter_config *);
void (*stop) (void);
void (*handle_interrupt) (struct pt_regs *,
@@ -59,10 +56,19 @@ struct op_powerpc_model {
int num_counters;
};
-#ifdef __powerpc64__
+#ifdef CONFIG_FSL_BOOKE
+extern struct op_powerpc_model op_model_fsl_booke;
+#else /* Otherwise, it's classic */
+
+#ifdef CONFIG_PPC64
extern struct op_powerpc_model op_model_rs64;
extern struct op_powerpc_model op_model_power4;
+#else /* Otherwise, CONFIG_PPC32 */
+extern struct op_powerpc_model op_model_7450;
+#endif
+
+/* All the classic PPC parts use these */
static inline unsigned int ctr_read(unsigned int i)
{
switch(i) {
@@ -78,10 +84,14 @@ static inline unsigned int ctr_read(unsigned int i)
return mfspr(SPRN_PMC5);
case 5:
return mfspr(SPRN_PMC6);
+
+/* No PPC32 chip has more than 6 so far */
+#ifdef CONFIG_PPC64
case 6:
return mfspr(SPRN_PMC7);
case 7:
return mfspr(SPRN_PMC8);
+#endif
default:
return 0;
}
@@ -108,16 +118,21 @@ static inline void ctr_write(unsigned int i, unsigned int val)
case 5:
mtspr(SPRN_PMC6, val);
break;
+
+/* No PPC32 chip has more than 6, yet */
+#ifdef CONFIG_PPC64
case 6:
mtspr(SPRN_PMC7, val);
break;
case 7:
mtspr(SPRN_PMC8, val);
break;
+#endif
default:
break;
}
}
-#endif /* __powerpc64__ */
+#endif /* !CONFIG_FSL_BOOKE */
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_OPROFILE_IMPL_H */
diff --git a/include/asm-powerpc/pSeries_reconfig.h b/include/asm-powerpc/pSeries_reconfig.h
index c0db1ea7f7d1..ea6cfb8efb84 100644
--- a/include/asm-powerpc/pSeries_reconfig.h
+++ b/include/asm-powerpc/pSeries_reconfig.h
@@ -1,5 +1,6 @@
#ifndef _PPC64_PSERIES_RECONFIG_H
#define _PPC64_PSERIES_RECONFIG_H
+#ifdef __KERNEL__
#include <linux/notifier.h>
@@ -22,4 +23,5 @@ static inline int pSeries_reconfig_notifier_register(struct notifier_block *nb)
static inline void pSeries_reconfig_notifier_unregister(struct notifier_block *nb) { }
#endif /* CONFIG_PPC_PSERIES */
+#endif /* __KERNEL__ */
#endif /* _PPC64_PSERIES_RECONFIG_H */
diff --git a/include/asm-powerpc/paca.h b/include/asm-powerpc/paca.h
index 92c765c35bd0..3ae52d9dc9ff 100644
--- a/include/asm-powerpc/paca.h
+++ b/include/asm-powerpc/paca.h
@@ -14,11 +14,11 @@
*/
#ifndef _ASM_POWERPC_PACA_H
#define _ASM_POWERPC_PACA_H
+#ifdef __KERNEL__
#include <linux/config.h>
#include <asm/types.h>
#include <asm/lppaca.h>
-#include <asm/iseries/it_lp_reg_save.h>
#include <asm/mmu.h>
register struct paca_struct *local_paca asm("r13");
@@ -31,9 +31,9 @@ struct task_struct;
*
* This structure is not directly accessed by firmware or the service
* processor except for the first two pointers that point to the
- * lppaca area and the ItLpRegSave area for this CPU. Both the
- * lppaca and ItLpRegSave objects are currently contained within the
- * PACA but they do not need to be.
+ * lppaca area and the ItLpRegSave area for this CPU. The lppaca
+ * object is currently contained within the PACA but it doesn't need
+ * to be.
*/
struct paca_struct {
/*
@@ -48,7 +48,9 @@ struct paca_struct {
* accessed by the firmware
*/
struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */
- struct ItLpRegSave *reg_save_ptr; /* Pointer to LpRegSave for PLIC */
+#ifdef CONFIG_PPC_ISERIES
+ void *reg_save_ptr; /* Pointer to LpRegSave for PLIC */
+#endif /* CONFIG_PPC_ISERIES */
/*
* MAGIC: the spinlock functions in arch/ppc64/lib/locks.c
@@ -59,7 +61,6 @@ struct paca_struct {
u16 lock_token; /* Constant 0x8000, used in locks */
u16 paca_index; /* Logical processor number */
- u32 default_decr; /* Default decrementer value */
u64 kernel_toc; /* Kernel TOC address */
u64 stab_real; /* Absolute address of segment table */
u64 stab_addr; /* Virtual address of segment table */
@@ -90,14 +91,10 @@ struct paca_struct {
struct task_struct *__current; /* Pointer to current */
u64 kstack; /* Saved Kernel stack addr */
u64 stab_rr; /* stab/slb round-robin counter */
- u64 next_jiffy_update_tb; /* TB value for next jiffy update */
u64 saved_r1; /* r1 save for RTAS calls */
u64 saved_msr; /* MSR saved here by enter_rtas */
u8 proc_enabled; /* irq soft-enable flag */
- /* not yet used */
- u64 exdsi[8]; /* used for linear mapping hash table misses */
-
/*
* iSeries structure which the hypervisor knows about -
* this structure should not cross a page boundary.
@@ -110,11 +107,9 @@ struct paca_struct {
* cross a page boundary.
*/
struct lppaca lppaca __attribute__((__aligned__(0x400)));
-#ifdef CONFIG_PPC_ISERIES
- struct ItLpRegSave reg_save;
-#endif
};
extern struct paca_struct paca[];
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_PACA_H */
diff --git a/include/asm-powerpc/page.h b/include/asm-powerpc/page.h
index 18c1e5ee81a3..76d7cb4b4ffc 100644
--- a/include/asm-powerpc/page.h
+++ b/include/asm-powerpc/page.h
@@ -37,8 +37,30 @@
*/
#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1))
+/*
+ * KERNELBASE is the virtual address of the start of the kernel, it's often
+ * the same as PAGE_OFFSET, but _might not be_.
+ *
+ * The kdump dump kernel is one example where KERNELBASE != PAGE_OFFSET.
+ *
+ * To get a physical address from a virtual one you subtract PAGE_OFFSET,
+ * _not_ KERNELBASE.
+ *
+ * If you want to know something's offset from the start of the kernel you
+ * should subtract KERNELBASE.
+ *
+ * If you want to test if something's a kernel address, use is_kernel_addr().
+ */
+
+#ifdef CONFIG_CRASH_DUMP
+/* Kdump kernel runs at 32 MB, change at your peril. */
+#define PHYSICAL_START 0x2000000
+#else
+#define PHYSICAL_START 0x0
+#endif
+
#define PAGE_OFFSET ASM_CONST(CONFIG_KERNEL_START)
-#define KERNELBASE PAGE_OFFSET
+#define KERNELBASE (PAGE_OFFSET + PHYSICAL_START)
#ifdef CONFIG_DISCONTIGMEM
#define page_to_pfn(page) discontigmem_page_to_pfn(page)
@@ -56,7 +78,7 @@
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-#define __va(x) ((void *)((unsigned long)(x) + KERNELBASE))
+#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET))
#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET)
/*
@@ -86,6 +108,12 @@
/* to align the pointer to the (next) page boundary */
#define PAGE_ALIGN(addr) _ALIGN(addr, PAGE_SIZE)
+/*
+ * Don't compare things with KERNELBASE or PAGE_OFFSET to test for
+ * "kernelness", use is_kernel_addr() - it should do what you want.
+ */
+#define is_kernel_addr(x) ((x) >= PAGE_OFFSET)
+
#ifndef __ASSEMBLY__
#undef STRICT_MM_TYPECHECKS
diff --git a/include/asm-powerpc/page_32.h b/include/asm-powerpc/page_32.h
index 7259cfd85da9..2677bad70f40 100644
--- a/include/asm-powerpc/page_32.h
+++ b/include/asm-powerpc/page_32.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_PAGE_32_H
#define _ASM_POWERPC_PAGE_32_H
+#ifdef __KERNEL__
#define VM_DATA_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS32
@@ -37,4 +38,5 @@ extern __inline__ int get_order(unsigned long size)
#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_PAGE_32_H */
diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h
index 6642c0125001..3fb061bab9ec 100644
--- a/include/asm-powerpc/page_64.h
+++ b/include/asm-powerpc/page_64.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_PAGE_64_H
#define _ASM_POWERPC_PAGE_64_H
+#ifdef __KERNEL__
/*
* Copyright (C) 2001 PPC64 Team, IBM Corp
@@ -25,16 +26,6 @@
*/
#define PAGE_FACTOR (PAGE_SHIFT - HW_PAGE_SHIFT)
-#define REGION_SIZE 4UL
-#define REGION_SHIFT 60UL
-#define REGION_MASK (((1UL<<REGION_SIZE)-1UL)<<REGION_SHIFT)
-
-#define VMALLOCBASE ASM_CONST(0xD000000000000000)
-#define VMALLOC_REGION_ID (VMALLOCBASE >> REGION_SHIFT)
-#define KERNEL_REGION_ID (KERNELBASE >> REGION_SHIFT)
-#define USER_REGION_ID (0UL)
-#define REGION_ID(ea) (((unsigned long)(ea)) >> REGION_SHIFT)
-
/* Segment size */
#define SID_SHIFT 28
#define SID_MASK 0xfffffffffUL
@@ -180,4 +171,5 @@ extern unsigned int HPAGE_SHIFT;
#include <asm-generic/page.h>
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_PAGE_64_H */
diff --git a/include/asm-powerpc/param.h b/include/asm-powerpc/param.h
index bdc724f70884..094f63d4d5ca 100644
--- a/include/asm-powerpc/param.h
+++ b/include/asm-powerpc/param.h
@@ -1,8 +1,6 @@
#ifndef _ASM_POWERPC_PARAM_H
#define _ASM_POWERPC_PARAM_H
-#include <linux/config.h>
-
#ifdef __KERNEL__
#define HZ CONFIG_HZ /* internal kernel timer frequency */
#define USER_HZ 100 /* for user interfaces in "ticks" */
diff --git a/include/asm-powerpc/parport.h b/include/asm-powerpc/parport.h
index d86b410a6f8b..897e49a88a6b 100644
--- a/include/asm-powerpc/parport.h
+++ b/include/asm-powerpc/parport.h
@@ -8,6 +8,7 @@
#ifndef _ASM_POWERPC_PARPORT_H
#define _ASM_POWERPC_PARPORT_H
+#ifdef __KERNEL__
static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
@@ -15,4 +16,5 @@ static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
return parport_pc_find_isa_ports (autoirq, autodma);
}
+#endif /* __KERNEL__ */
#endif /* !(_ASM_POWERPC_PARPORT_H) */
diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h
index 223ec7bd81da..1a08860e789e 100644
--- a/include/asm-powerpc/pci-bridge.h
+++ b/include/asm-powerpc/pci-bridge.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_PCI_BRIDGE_H
#define _ASM_POWERPC_PCI_BRIDGE_H
+#ifdef __KERNEL__
#ifndef CONFIG_PPC64
#include <asm-ppc/pci-bridge.h>
@@ -125,9 +126,19 @@ static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
return bus->sysdata; /* Must be root bus (PHB) */
}
+/** Find the bus corresponding to the indicated device node */
+struct pci_bus * pcibios_find_pci_bus(struct device_node *dn);
+
extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
struct device_node *dev, int primary);
+/** Remove all of the PCI devices under this bus */
+void pcibios_remove_pci_devices(struct pci_bus *bus);
+
+/** Discover new pci devices under this bus, and add them */
+void pcibios_add_pci_devices(struct pci_bus * bus);
+void pcibios_fixup_new_pci_devices(struct pci_bus *bus, int fix_bus);
+
extern int pcibios_remove_root_bus(struct pci_controller *phb);
extern void phbs_remap_io(void);
@@ -140,14 +151,27 @@ static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
return PCI_DN(busdn)->phb;
}
+extern struct pci_controller*
+pci_find_hose_for_OF_device(struct device_node* node);
+
extern struct pci_controller *
pcibios_alloc_controller(struct device_node *dev);
extern void pcibios_free_controller(struct pci_controller *phb);
+#ifdef CONFIG_PCI
+extern unsigned long pci_address_to_pio(phys_addr_t address);
+#else
+static inline unsigned long pci_address_to_pio(phys_addr_t address)
+{
+ return (unsigned long)-1;
+}
+#endif
+
/* Return values for ppc_md.pci_probe_mode function */
#define PCI_PROBE_NONE -1 /* Don't look at this bus at all */
#define PCI_PROBE_NORMAL 0 /* Do normal PCI probing */
#define PCI_PROBE_DEVTREE 1 /* Instantiate from device tree */
#endif /* CONFIG_PPC64 */
+#endif /* __KERNEL__ */
#endif
diff --git a/include/asm-powerpc/pci.h b/include/asm-powerpc/pci.h
index d5934a076bd0..5d2c9e6c4be2 100644
--- a/include/asm-powerpc/pci.h
+++ b/include/asm-powerpc/pci.h
@@ -216,6 +216,8 @@ extern int remap_bus_range(struct pci_bus *bus);
extern void pcibios_fixup_device_resources(struct pci_dev *dev,
struct pci_bus *bus);
+extern void pcibios_claim_one_bus(struct pci_bus *b);
+
extern struct pci_controller *init_phb_dynamic(struct device_node *dn);
extern struct pci_dev *of_create_pci_dev(struct device_node *node,
diff --git a/include/asm-powerpc/pgalloc.h b/include/asm-powerpc/pgalloc.h
index bfc2113b3630..9f5b052784a5 100644
--- a/include/asm-powerpc/pgalloc.h
+++ b/include/asm-powerpc/pgalloc.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_PGALLOC_H
#define _ASM_POWERPC_PGALLOC_H
+#ifdef __KERNEL__
#ifndef CONFIG_PPC64
#include <asm-ppc/pgalloc.h>
@@ -153,4 +154,5 @@ extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
#define check_pgt_cache() do { } while (0)
#endif /* CONFIG_PPC64 */
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_PGALLOC_H */
diff --git a/include/asm-powerpc/pgtable-64k.h b/include/asm-powerpc/pgtable-64k.h
index 154f1840ece4..653915014dcd 100644
--- a/include/asm-powerpc/pgtable-64k.h
+++ b/include/asm-powerpc/pgtable-64k.h
@@ -1,3 +1,7 @@
+#ifndef _ASM_POWERPC_PGTABLE_64K_H
+#define _ASM_POWERPC_PGTABLE_64K_H
+#ifdef __KERNEL__
+
#include <asm-generic/pgtable-nopud.h>
@@ -88,3 +92,5 @@
#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PGTABLE_64K_H */
diff --git a/include/asm-powerpc/pgtable.h b/include/asm-powerpc/pgtable.h
index 0303f57366c1..e38931379a72 100644
--- a/include/asm-powerpc/pgtable.h
+++ b/include/asm-powerpc/pgtable.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_PGTABLE_H
#define _ASM_POWERPC_PGTABLE_H
+#ifdef __KERNEL__
#ifndef CONFIG_PPC64
#include <asm-ppc/pgtable.h>
@@ -58,6 +59,17 @@ struct mm_struct;
#define IMALLOC_END (VMALLOC_START + PGTABLE_RANGE)
/*
+ * Region IDs
+ */
+#define REGION_SHIFT 60UL
+#define REGION_MASK (0xfUL << REGION_SHIFT)
+#define REGION_ID(ea) (((unsigned long)(ea)) >> REGION_SHIFT)
+
+#define VMALLOC_REGION_ID (REGION_ID(VMALLOC_START))
+#define KERNEL_REGION_ID (REGION_ID(PAGE_OFFSET))
+#define USER_REGION_ID (0UL)
+
+/*
* Common bits in a linux-style PTE. These match the bits in the
* (hardware-defined) PowerPC PTE as closely as possible. Additional
* bits may be defined in pgtable-*.h
@@ -521,4 +533,5 @@ void pgtable_cache_init(void);
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_PPC64 */
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_PGTABLE_H */
diff --git a/include/asm-powerpc/pmac_feature.h b/include/asm-powerpc/pmac_feature.h
index e9683bcff19b..3221628130c4 100644
--- a/include/asm-powerpc/pmac_feature.h
+++ b/include/asm-powerpc/pmac_feature.h
@@ -121,6 +121,7 @@
#define PMAC_TYPE_IMAC_G5 0x152 /* iMac G5 */
#define PMAC_TYPE_XSERVE_G5 0x153 /* Xserve G5 */
#define PMAC_TYPE_UNKNOWN_K2 0x19f /* Any other K2 based */
+#define PMAC_TYPE_UNKNOWN_SHASTA 0x19e /* Any other Shasta based */
/*
* Motherboard flags
@@ -317,10 +318,6 @@ extern void pmac_register_agp_pm(struct pci_dev *bridge,
extern void pmac_suspend_agp_for_card(struct pci_dev *dev);
extern void pmac_resume_agp_for_card(struct pci_dev *dev);
-/* Used by the via-pmu driver for suspend/resume
- */
-extern void pmac_tweak_clock_spreading(int enable);
-
/*
* The part below is for use by macio_asic.c only, do not rely
* on the data structures or constants below in a normal driver
@@ -341,6 +338,7 @@ enum {
macio_pangea,
macio_intrepid,
macio_keylargo2,
+ macio_shasta,
};
struct macio_chip
@@ -376,5 +374,24 @@ extern struct macio_chip* macio_find(struct device_node* child, int type);
#define MACIO_IN8(r) (in_8(MACIO_FCR8(macio,r)))
#define MACIO_OUT8(r,v) (out_8(MACIO_FCR8(macio,r), (v)))
+/*
+ * Those are exported by pmac feature for internal use by arch code
+ * only like the platform function callbacks, do not use directly in drivers
+ */
+extern spinlock_t feature_lock;
+extern struct device_node *uninorth_node;
+extern u32 __iomem *uninorth_base;
+
+/*
+ * Uninorth reg. access. Note that Uni-N regs are big endian
+ */
+
+#define UN_REG(r) (uninorth_base + ((r) >> 2))
+#define UN_IN(r) (in_be32(UN_REG(r)))
+#define UN_OUT(r,v) (out_be32(UN_REG(r), (v)))
+#define UN_BIS(r,v) (UN_OUT((r), UN_IN(r) | (v)))
+#define UN_BIC(r,v) (UN_OUT((r), UN_IN(r) & ~(v)))
+
+
#endif /* __PPC_ASM_PMAC_FEATURE_H */
#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/pmac_low_i2c.h b/include/asm-powerpc/pmac_low_i2c.h
index 809a5963d5e7..131011bd7e76 100644
--- a/include/asm-powerpc/pmac_low_i2c.h
+++ b/include/asm-powerpc/pmac_low_i2c.h
@@ -11,33 +11,97 @@
*/
#ifndef __PMAC_LOW_I2C_H__
#define __PMAC_LOW_I2C_H__
+#ifdef __KERNEL__
/* i2c mode (based on the platform functions format) */
enum {
- pmac_low_i2c_mode_dumb = 1,
- pmac_low_i2c_mode_std = 2,
- pmac_low_i2c_mode_stdsub = 3,
- pmac_low_i2c_mode_combined = 4,
+ pmac_i2c_mode_dumb = 1,
+ pmac_i2c_mode_std = 2,
+ pmac_i2c_mode_stdsub = 3,
+ pmac_i2c_mode_combined = 4,
};
/* RW bit in address */
enum {
- pmac_low_i2c_read = 0x01,
- pmac_low_i2c_write = 0x00
+ pmac_i2c_read = 0x01,
+ pmac_i2c_write = 0x00
};
+/* i2c bus type */
+enum {
+ pmac_i2c_bus_keywest = 0,
+ pmac_i2c_bus_pmu = 1,
+ pmac_i2c_bus_smu = 2,
+};
+
+/* i2c bus features */
+enum {
+ /* can_largesub : supports >1 byte subaddresses (SMU only) */
+ pmac_i2c_can_largesub = 0x00000001u,
+
+ /* multibus : device node holds multiple busses, bus number is
+ * encoded in bits 0xff00 of "reg" of a given device
+ */
+ pmac_i2c_multibus = 0x00000002u,
+};
+
+/* i2c busses in the system */
+struct pmac_i2c_bus;
+struct i2c_adapter;
+
/* Init, called early during boot */
-extern void pmac_init_low_i2c(void);
+extern int pmac_i2c_init(void);
+
+/* Lookup an i2c bus for a device-node. The node can be either the bus
+ * node itself or a device below it. In the case of a multibus, the bus
+ * node itself is the controller node, else, it's a child of the controller
+ * node
+ */
+extern struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node);
+
+/* Get the address for an i2c device. This strips the bus number if
+ * necessary. The 7 bits address is returned 1 bit right shifted so that the
+ * direction can be directly ored in
+ */
+extern u8 pmac_i2c_get_dev_addr(struct device_node *device);
+
+/* Get infos about a bus */
+extern struct device_node *pmac_i2c_get_controller(struct pmac_i2c_bus *bus);
+extern struct device_node *pmac_i2c_get_bus_node(struct pmac_i2c_bus *bus);
+extern int pmac_i2c_get_type(struct pmac_i2c_bus *bus);
+extern int pmac_i2c_get_flags(struct pmac_i2c_bus *bus);
+extern int pmac_i2c_get_channel(struct pmac_i2c_bus *bus);
+
+/* i2c layer adapter attach/detach */
+extern void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus,
+ struct i2c_adapter *adapter);
+extern void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus,
+ struct i2c_adapter *adapter);
+extern struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus);
+extern struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter);
+
+/* March a device or bus with an i2c adapter structure, to be used by drivers
+ * to match device-tree nodes with i2c adapters during adapter discovery
+ * callbacks
+ */
+extern int pmac_i2c_match_adapter(struct device_node *dev,
+ struct i2c_adapter *adapter);
+
-/* Locking functions exposed to i2c-keywest */
-int pmac_low_i2c_lock(struct device_node *np);
-int pmac_low_i2c_unlock(struct device_node *np);
+/* (legacy) Locking functions exposed to i2c-keywest */
+extern int pmac_low_i2c_lock(struct device_node *np);
+extern int pmac_low_i2c_unlock(struct device_node *np);
/* Access functions for platform code */
-int pmac_low_i2c_open(struct device_node *np, int channel);
-int pmac_low_i2c_close(struct device_node *np);
-int pmac_low_i2c_setmode(struct device_node *np, int mode);
-int pmac_low_i2c_xfer(struct device_node *np, u8 addrdir, u8 subaddr, u8 *data, int len);
+extern int pmac_i2c_open(struct pmac_i2c_bus *bus, int polled);
+extern void pmac_i2c_close(struct pmac_i2c_bus *bus);
+extern int pmac_i2c_setmode(struct pmac_i2c_bus *bus, int mode);
+extern int pmac_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
+ u32 subaddr, u8 *data, int len);
+/* Suspend/resume code called by via-pmu directly for now */
+extern void pmac_pfunc_i2c_suspend(void);
+extern void pmac_pfunc_i2c_resume(void);
+#endif /* __KERNEL__ */
#endif /* __PMAC_LOW_I2C_H__ */
diff --git a/include/asm-powerpc/pmac_pfunc.h b/include/asm-powerpc/pmac_pfunc.h
new file mode 100644
index 000000000000..d9728c80f86d
--- /dev/null
+++ b/include/asm-powerpc/pmac_pfunc.h
@@ -0,0 +1,253 @@
+#ifndef __PMAC_PFUNC_H__
+#define __PMAC_PFUNC_H__
+
+#include <linux/types.h>
+#include <linux/list.h>
+
+/* Flags in command lists */
+#define PMF_FLAGS_ON_INIT 0x80000000u
+#define PMF_FLGAS_ON_TERM 0x40000000u
+#define PMF_FLAGS_ON_SLEEP 0x20000000u
+#define PMF_FLAGS_ON_WAKE 0x10000000u
+#define PMF_FLAGS_ON_DEMAND 0x08000000u
+#define PMF_FLAGS_INT_GEN 0x04000000u
+#define PMF_FLAGS_HIGH_SPEED 0x02000000u
+#define PMF_FLAGS_LOW_SPEED 0x01000000u
+#define PMF_FLAGS_SIDE_EFFECTS 0x00800000u
+
+/*
+ * Arguments to a platform function call.
+ *
+ * NOTE: By convention, pointer arguments point to an u32
+ */
+struct pmf_args {
+ union {
+ u32 v;
+ u32 *p;
+ } u[4];
+ unsigned int count;
+};
+
+/*
+ * A driver capable of interpreting commands provides a handlers
+ * structure filled with whatever handlers are implemented by this
+ * driver. Non implemented handlers are left NULL.
+ *
+ * PMF_STD_ARGS are the same arguments that are passed to the parser
+ * and that gets passed back to the various handlers.
+ *
+ * Interpreting a given function always start with a begin() call which
+ * returns an instance data to be passed around subsequent calls, and
+ * ends with an end() call. This allows the low level driver to implement
+ * locking policy or per-function instance data.
+ *
+ * For interrupt capable functions, irq_enable() is called when a client
+ * registers, and irq_disable() is called when the last client unregisters
+ * Note that irq_enable & irq_disable are called within a semaphore held
+ * by the core, thus you should not try to register yourself to some other
+ * pmf interrupt during those calls.
+ */
+
+#define PMF_STD_ARGS struct pmf_function *func, void *instdata, \
+ struct pmf_args *args
+
+struct pmf_function;
+
+struct pmf_handlers {
+ void * (*begin)(struct pmf_function *func, struct pmf_args *args);
+ void (*end)(struct pmf_function *func, void *instdata);
+
+ int (*irq_enable)(struct pmf_function *func);
+ int (*irq_disable)(struct pmf_function *func);
+
+ int (*write_gpio)(PMF_STD_ARGS, u8 value, u8 mask);
+ int (*read_gpio)(PMF_STD_ARGS, u8 mask, int rshift, u8 xor);
+
+ int (*write_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask);
+ int (*read_reg32)(PMF_STD_ARGS, u32 offset);
+ int (*write_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask);
+ int (*read_reg16)(PMF_STD_ARGS, u32 offset);
+ int (*write_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask);
+ int (*read_reg8)(PMF_STD_ARGS, u32 offset);
+
+ int (*delay)(PMF_STD_ARGS, u32 duration);
+
+ int (*wait_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask);
+ int (*wait_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask);
+ int (*wait_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask);
+
+ int (*read_i2c)(PMF_STD_ARGS, u32 len);
+ int (*write_i2c)(PMF_STD_ARGS, u32 len, const u8 *data);
+ int (*rmw_i2c)(PMF_STD_ARGS, u32 masklen, u32 valuelen, u32 totallen,
+ const u8 *maskdata, const u8 *valuedata);
+
+ int (*read_cfg)(PMF_STD_ARGS, u32 offset, u32 len);
+ int (*write_cfg)(PMF_STD_ARGS, u32 offset, u32 len, const u8 *data);
+ int (*rmw_cfg)(PMF_STD_ARGS, u32 offset, u32 masklen, u32 valuelen,
+ u32 totallen, const u8 *maskdata, const u8 *valuedata);
+
+ int (*read_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len);
+ int (*write_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len, const u8 *data);
+ int (*set_i2c_mode)(PMF_STD_ARGS, int mode);
+ int (*rmw_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 masklen, u32 valuelen,
+ u32 totallen, const u8 *maskdata,
+ const u8 *valuedata);
+
+ int (*read_reg32_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift,
+ u32 xor);
+ int (*read_reg16_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift,
+ u32 xor);
+ int (*read_reg8_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift,
+ u32 xor);
+
+ int (*write_reg32_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask);
+ int (*write_reg16_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask);
+ int (*write_reg8_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask);
+
+ int (*mask_and_compare)(PMF_STD_ARGS, u32 len, const u8 *maskdata,
+ const u8 *valuedata);
+
+ struct module *owner;
+};
+
+
+/*
+ * Drivers who expose platform functions register at init time, this
+ * causes the platform functions for that device node to be parsed in
+ * advance and associated with the device. The data structures are
+ * partially public so a driver can walk the list of platform functions
+ * and eventually inspect the flags
+ */
+struct pmf_device;
+
+struct pmf_function {
+ /* All functions for a given driver are linked */
+ struct list_head link;
+
+ /* Function node & driver data */
+ struct device_node *node;
+ void *driver_data;
+
+ /* For internal use by core */
+ struct pmf_device *dev;
+
+ /* The name is the "xxx" in "platform-do-xxx", this is how
+ * platform functions are identified by this code. Some functions
+ * only operate for a given target, in which case the phandle is
+ * here (or 0 if the filter doesn't apply)
+ */
+ const char *name;
+ u32 phandle;
+
+ /* The flags for that function. You can have several functions
+ * with the same name and different flag
+ */
+ u32 flags;
+
+ /* The actual tokenized function blob */
+ const void *data;
+ unsigned int length;
+
+ /* Interrupt clients */
+ struct list_head irq_clients;
+
+ /* Refcounting */
+ struct kref ref;
+};
+
+/*
+ * For platform functions that are interrupts, one can register
+ * irq_client structures. You canNOT use the same structure twice
+ * as it contains a link member. Also, the callback is called with
+ * a spinlock held, you must not call back into any of the pmf_* functions
+ * from within that callback
+ */
+struct pmf_irq_client {
+ void (*handler)(void *data);
+ void *data;
+ struct module *owner;
+ struct list_head link;
+};
+
+
+/*
+ * Register/Unregister a function-capable driver and its handlers
+ */
+extern int pmf_register_driver(struct device_node *np,
+ struct pmf_handlers *handlers,
+ void *driverdata);
+
+extern void pmf_unregister_driver(struct device_node *np);
+
+
+/*
+ * Register/Unregister interrupt clients
+ */
+extern int pmf_register_irq_client(struct device_node *np,
+ const char *name,
+ struct pmf_irq_client *client);
+
+extern void pmf_unregister_irq_client(struct device_node *np,
+ const char *name,
+ struct pmf_irq_client *client);
+
+/*
+ * Called by the handlers when an irq happens
+ */
+extern void pmf_do_irq(struct pmf_function *func);
+
+
+/*
+ * Low level call to platform functions.
+ *
+ * The phandle can filter on the target object for functions that have
+ * multiple targets, the flags allow you to restrict the call to a given
+ * combination of flags.
+ *
+ * The args array contains as many arguments as is required by the function,
+ * this is dependent on the function you are calling, unfortunately Apple
+ * mecanism provides no way to encode that so you have to get it right at
+ * the call site. Some functions require no args, in which case, you can
+ * pass NULL.
+ *
+ * You can also pass NULL to the name. This will match any function that has
+ * the appropriate combination of flags & phandle or you can pass 0 to the
+ * phandle to match any
+ */
+extern int pmf_do_functions(struct device_node *np, const char *name,
+ u32 phandle, u32 flags, struct pmf_args *args);
+
+
+
+/*
+ * High level call to a platform function.
+ *
+ * This one looks for the platform-xxx first so you should call it to the
+ * actual target if any. It will fallback to platform-do-xxx if it can't
+ * find one. It will also exclusively target functions that have
+ * the "OnDemand" flag.
+ */
+
+extern int pmf_call_function(struct device_node *target, const char *name,
+ struct pmf_args *args);
+
+
+/*
+ * For low latency interrupt usage, you can lookup for on-demand functions
+ * using the functions below
+ */
+
+extern struct pmf_function *pmf_find_function(struct device_node *target,
+ const char *name);
+
+extern struct pmf_function * pmf_get_function(struct pmf_function *func);
+extern void pmf_put_function(struct pmf_function *func);
+
+extern int pmf_call_one(struct pmf_function *func, struct pmf_args *args);
+
+
+/* Suspend/resume code called by via-pmu directly for now */
+extern void pmac_pfunc_base_suspend(void);
+extern void pmac_pfunc_base_resume(void);
+
+#endif /* __PMAC_PFUNC_H__ */
diff --git a/include/asm-powerpc/pmc.h b/include/asm-powerpc/pmc.h
index 5f41f3a2b293..07d6a4279319 100644
--- a/include/asm-powerpc/pmc.h
+++ b/include/asm-powerpc/pmc.h
@@ -18,6 +18,7 @@
*/
#ifndef _POWERPC_PMC_H
#define _POWERPC_PMC_H
+#ifdef __KERNEL__
#include <asm/ptrace.h>
@@ -44,4 +45,5 @@ void dump_pmcs(void);
extern struct op_powerpc_model op_model_fsl_booke;
#endif
+#endif /* __KERNEL__ */
#endif /* _POWERPC_PMC_H */
diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h
index 36cdc869e580..bdef312900a1 100644
--- a/include/asm-powerpc/ppc-pci.h
+++ b/include/asm-powerpc/ppc-pci.h
@@ -8,6 +8,7 @@
*/
#ifndef _ASM_POWERPC_PPC_PCI_H
#define _ASM_POWERPC_PPC_PCI_H
+#ifdef __KERNEL__
#include <linux/pci.h>
#include <asm/pci-bridge.h>
@@ -93,4 +94,5 @@ void eeh_clear_slot (struct device_node *dn, int mode_flag);
#endif
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_PPC_PCI_H */
diff --git a/include/asm-powerpc/ppc_asm.h b/include/asm-powerpc/ppc_asm.h
index c27baa0563fe..0dc798d46ea4 100644
--- a/include/asm-powerpc/ppc_asm.h
+++ b/include/asm-powerpc/ppc_asm.h
@@ -94,6 +94,7 @@
#define RFDI .long 0x4c00004e /* rfdi instruction */
#define RFMCI .long 0x4c00004c /* rfmci instruction */
+#ifdef __KERNEL__
#ifdef CONFIG_PPC64
#define XGLUE(a,b) a##b
@@ -325,6 +326,8 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
#define CLR_TOP32(r)
#endif
+#endif /* __KERNEL__ */
+
/* The boring bits... */
/* Condition Register Bit Fields */
diff --git a/include/asm-powerpc/processor.h b/include/asm-powerpc/processor.h
index d12382d292d4..415fa393b00c 100644
--- a/include/asm-powerpc/processor.h
+++ b/include/asm-powerpc/processor.h
@@ -10,7 +10,6 @@
* 2 of the License, or (at your option) any later version.
*/
-#include <linux/config.h>
#include <asm/reg.h>
#ifndef __ASSEMBLY__
@@ -50,6 +49,7 @@
#define _CHRP_IBM 0x05 /* IBM chrp, the longtrail and longtrail 2 */
#define _CHRP_Pegasos 0x06 /* Genesi/bplan's Pegasos and Pegasos2 */
+#ifdef __KERNEL__
#define platform_is_pseries() (_machine == PLATFORM_PSERIES || \
_machine == PLATFORM_PSERIES_LPAR)
#define platform_is_lpar() (!!(_machine & PLATFORM_LPAR))
@@ -68,7 +68,6 @@ extern int _chrp_type;
* vendor. Board revision is also made available. This will be moved
* elsewhere soon
*/
-extern unsigned char ucSystemType;
extern unsigned char ucBoardRev;
extern unsigned char ucBoardRevMaj, ucBoardRevMin;
@@ -82,7 +81,7 @@ extern unsigned char ucBoardRevMaj, ucBoardRevMin;
#else
#define _machine 0
#endif /* CONFIG_PPC_MULTIPLATFORM */
-
+#endif /* __KERNEL__ */
/*
* Default implementation of macro that returns current
* instruction pointer ("program counter").
diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h
index f999df1c5c90..329e9bf62260 100644
--- a/include/asm-powerpc/prom.h
+++ b/include/asm-powerpc/prom.h
@@ -65,49 +65,11 @@ struct boot_param_header
typedef u32 phandle;
typedef u32 ihandle;
-struct address_range {
- unsigned long space;
- unsigned long address;
- unsigned long size;
-};
-
struct interrupt_info {
int line;
int sense; /* +ve/-ve logic, edge or level, etc. */
};
-struct pci_address {
- u32 a_hi;
- u32 a_mid;
- u32 a_lo;
-};
-
-struct isa_address {
- u32 a_hi;
- u32 a_lo;
-};
-
-struct isa_range {
- struct isa_address isa_addr;
- struct pci_address pci_addr;
- unsigned int size;
-};
-
-struct reg_property {
- unsigned long address;
- unsigned long size;
-};
-
-struct reg_property32 {
- unsigned int address;
- unsigned int size;
-};
-
-struct reg_property64 {
- u64 address;
- u64 size;
-};
-
struct property {
char *name;
int length;
@@ -120,8 +82,6 @@ struct device_node {
char *type;
phandle node;
phandle linux_phandle;
- int n_addrs;
- struct address_range *addrs;
int n_intrs;
struct interrupt_info *intrs;
char *full_name;
@@ -223,5 +183,36 @@ extern struct resource *request_OF_resource(struct device_node* node,
int index, const char* name_postfix);
extern int release_OF_resource(struct device_node* node, int index);
+
+/*
+ * OF address retreival & translation
+ */
+
+
+/* Translate an OF address block into a CPU physical address
+ */
+#define OF_BAD_ADDR ((u64)-1)
+extern u64 of_translate_address(struct device_node *np, u32 *addr);
+
+/* Extract an address from a device, returns the region size and
+ * the address space flags too. The PCI version uses a BAR number
+ * instead of an absolute index
+ */
+extern u32 *of_get_address(struct device_node *dev, int index,
+ u64 *size, unsigned int *flags);
+extern u32 *of_get_pci_address(struct device_node *dev, int bar_no,
+ u64 *size, unsigned int *flags);
+
+/* Get an address as a resource. Note that if your address is
+ * a PIO address, the conversion will fail if the physical address
+ * can't be internally converted to an IO token with
+ * pci_address_to_pio(), that is because it's either called to early
+ * or it can't be matched to any host bridge IO space
+ */
+extern int of_address_to_resource(struct device_node *dev, int index,
+ struct resource *r);
+extern int of_pci_address_to_resource(struct device_node *dev, int bar,
+ struct resource *r);
+
#endif /* __KERNEL__ */
#endif /* _POWERPC_PROM_H */
diff --git a/include/asm-powerpc/ptrace.h b/include/asm-powerpc/ptrace.h
index 1f7ecdb0b6ce..9c550b314823 100644
--- a/include/asm-powerpc/ptrace.h
+++ b/include/asm-powerpc/ptrace.h
@@ -87,7 +87,7 @@ extern unsigned long profile_pc(struct pt_regs *regs);
#define force_successful_syscall_return() \
do { \
- current_thread_info()->syscall_noerror = 1; \
+ set_thread_flag(TIF_NOERROR); \
} while(0)
/*
diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h
index eb392d038ed7..12ecc9b9f285 100644
--- a/include/asm-powerpc/reg.h
+++ b/include/asm-powerpc/reg.h
@@ -145,6 +145,10 @@
#define SPRN_CTR 0x009 /* Count Register */
#define SPRN_CTRLF 0x088
#define SPRN_CTRLT 0x098
+#define CTRL_CT 0xc0000000 /* current thread */
+#define CTRL_CT0 0x80000000 /* thread 0 */
+#define CTRL_CT1 0x40000000 /* thread 1 */
+#define CTRL_TE 0x00c00000 /* thread enable */
#define CTRL_RUNLATCH 0x1
#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */
#define DABR_TRANSLATION (1UL << 2)
@@ -257,11 +261,11 @@
#define SPRN_HID6 0x3F9 /* BE HID 6 */
#define HID6_LB (0x0F<<12) /* Concurrent Large Page Modes */
#define HID6_DLP (1<<20) /* Disable all large page modes (4K only) */
-#define SPRN_TSCR 0x399 /* Thread switch control on BE */
-#define SPRN_TTR 0x39A /* Thread switch timeout on BE */
-#define TSCR_DEC_ENABLE 0x200000 /* Decrementer Interrupt */
-#define TSCR_EE_ENABLE 0x100000 /* External Interrupt */
-#define TSCR_EE_BOOST 0x080000 /* External Interrupt Boost */
+#define SPRN_TSC_CELL 0x399 /* Thread switch control on Cell */
+#define TSC_CELL_DEC_ENABLE_0 0x400000 /* Decrementer Interrupt */
+#define TSC_CELL_DEC_ENABLE_1 0x200000 /* Decrementer Interrupt */
+#define TSC_CELL_EE_ENABLE 0x100000 /* External Interrupt */
+#define TSC_CELL_EE_BOOST 0x080000 /* External Interrupt Boost */
#define SPRN_TSC 0x3FD /* Thread switch control on others */
#define SPRN_TST 0x3FC /* Thread switch timeout on others */
#if !defined(SPRN_IAC1) && !defined(SPRN_IAC2)
@@ -375,6 +379,14 @@
#define SPRN_SPRG7 0x117 /* Special Purpose Register General 7 */
#define SPRN_SRR0 0x01A /* Save/Restore Register 0 */
#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */
+#define SRR1_WAKEMASK 0x00380000 /* reason for wakeup */
+#define SRR1_WAKERESET 0x00380000 /* System reset */
+#define SRR1_WAKESYSERR 0x00300000 /* System error */
+#define SRR1_WAKEEE 0x00200000 /* External interrupt */
+#define SRR1_WAKEMT 0x00280000 /* mtctrl */
+#define SRR1_WAKEDEC 0x00180000 /* Decrementer interrupt */
+#define SRR1_WAKETHERM 0x00100000 /* Thermal management interrupt */
+
#ifndef SPRN_SVR
#define SPRN_SVR 0x11E /* System Version Register */
#endif
@@ -443,12 +455,35 @@
#define SPRN_SDAR 781
#else /* 32-bit */
-#define SPRN_MMCR0 0x3B8 /* Monitor Mode Control Register 0 */
-#define SPRN_MMCR1 0x3BC /* Monitor Mode Control Register 1 */
-#define SPRN_PMC1 0x3B9 /* Performance Counter Register 1 */
-#define SPRN_PMC2 0x3BA /* Performance Counter Register 2 */
-#define SPRN_PMC3 0x3BD /* Performance Counter Register 3 */
-#define SPRN_PMC4 0x3BE /* Performance Counter Register 4 */
+#define SPRN_MMCR0 952 /* Monitor Mode Control Register 0 */
+#define MMCR0_FC 0x80000000UL /* freeze counters */
+#define MMCR0_FCS 0x40000000UL /* freeze in supervisor state */
+#define MMCR0_FCP 0x20000000UL /* freeze in problem state */
+#define MMCR0_FCM1 0x10000000UL /* freeze counters while MSR mark = 1 */
+#define MMCR0_FCM0 0x08000000UL /* freeze counters while MSR mark = 0 */
+#define MMCR0_PMXE 0x04000000UL /* performance monitor exception enable */
+#define MMCR0_FCECE 0x02000000UL /* freeze ctrs on enabled cond or event */
+#define MMCR0_TBEE 0x00400000UL /* time base exception enable */
+#define MMCR0_PMC1CE 0x00008000UL /* PMC1 count enable*/
+#define MMCR0_PMCnCE 0x00004000UL /* count enable for all but PMC 1*/
+#define MMCR0_TRIGGER 0x00002000UL /* TRIGGER enable */
+#define MMCR0_PMC1SEL 0x00001fc0UL /* PMC 1 Event */
+#define MMCR0_PMC2SEL 0x0000003fUL /* PMC 2 Event */
+
+#define SPRN_MMCR1 956
+#define MMCR1_PMC3SEL 0xf8000000UL /* PMC 3 Event */
+#define MMCR1_PMC4SEL 0x07c00000UL /* PMC 4 Event */
+#define MMCR1_PMC5SEL 0x003e0000UL /* PMC 5 Event */
+#define MMCR1_PMC6SEL 0x0001f800UL /* PMC 6 Event */
+#define SPRN_MMCR2 944
+#define SPRN_PMC1 953 /* Performance Counter Register 1 */
+#define SPRN_PMC2 954 /* Performance Counter Register 2 */
+#define SPRN_PMC3 957 /* Performance Counter Register 3 */
+#define SPRN_PMC4 958 /* Performance Counter Register 4 */
+#define SPRN_PMC5 945 /* Performance Counter Register 5 */
+#define SPRN_PMC6 946 /* Performance Counter Register 6 */
+
+#define SPRN_SIAR 955 /* Sampled Instruction Address Register */
/* Bit definitions for MMCR0 and PMC1 / PMC2. */
#define MMCR0_PMC1_CYCLES (1 << 7)
@@ -458,7 +493,6 @@
#define MMCR0_PMC2_CYCLES 0x1
#define MMCR0_PMC2_ITLB 0x7
#define MMCR0_PMC2_LOADMISSTIME 0x5
-#define MMCR0_PMXE (1 << 26)
#endif
/* Processor Version Register (PVR) field extraction */
diff --git a/include/asm-powerpc/rtas.h b/include/asm-powerpc/rtas.h
index d1bb611ea626..3428889e27b7 100644
--- a/include/asm-powerpc/rtas.h
+++ b/include/asm-powerpc/rtas.h
@@ -1,5 +1,6 @@
#ifndef _POWERPC_RTAS_H
#define _POWERPC_RTAS_H
+#ifdef __KERNEL__
#include <linux/spinlock.h>
#include <asm/page.h>
@@ -229,4 +230,5 @@ extern unsigned long rtas_rmo_buf;
#define GLOBAL_INTERRUPT_QUEUE 9005
+#endif /* __KERNEL__ */
#endif /* _POWERPC_RTAS_H */
diff --git a/include/asm-powerpc/seccomp.h b/include/asm-powerpc/seccomp.h
index 1e1cfe12882b..853765eb1f65 100644
--- a/include/asm-powerpc/seccomp.h
+++ b/include/asm-powerpc/seccomp.h
@@ -1,6 +1,10 @@
#ifndef _ASM_POWERPC_SECCOMP_H
+#define _ASM_POWERPC_SECCOMP_H
+#ifdef __KERNEL__
#include <linux/thread_info.h>
+#endif
+
#include <linux/unistd.h>
#define __NR_seccomp_read __NR_read
diff --git a/include/asm-powerpc/sections.h b/include/asm-powerpc/sections.h
index 47be2ac2a925..916018e425c4 100644
--- a/include/asm-powerpc/sections.h
+++ b/include/asm-powerpc/sections.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_SECTIONS_H
#define _ASM_POWERPC_SECTIONS_H
+#ifdef __KERNEL__
#include <asm-generic/sections.h>
@@ -17,4 +18,5 @@ static inline int in_kernel_text(unsigned long addr)
#endif
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_SECTIONS_H */
diff --git a/include/asm-powerpc/serial.h b/include/asm-powerpc/serial.h
index b273d630b32f..6dc9546d6908 100644
--- a/include/asm-powerpc/serial.h
+++ b/include/asm-powerpc/serial.h
@@ -15,4 +15,6 @@
/* Default baud base if not found in device-tree */
#define BASE_BAUD ( 1843200 / 16 )
+extern void find_legacy_serial_ports(void);
+
#endif /* _PPC64_SERIAL_H */
diff --git a/include/asm-powerpc/signal.h b/include/asm-powerpc/signal.h
index 694c8d2dab87..a4d8f8648541 100644
--- a/include/asm-powerpc/signal.h
+++ b/include/asm-powerpc/signal.h
@@ -2,10 +2,13 @@
#define _ASM_POWERPC_SIGNAL_H
#include <linux/types.h>
-#include <linux/config.h>
#define _NSIG 64
-#define _NSIG_BPW BITS_PER_LONG
+#ifdef __powerpc64__
+#define _NSIG_BPW 64
+#else
+#define _NSIG_BPW 32
+#endif
#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
typedef unsigned long old_sigset_t; /* at least 32 bits */
diff --git a/include/asm-powerpc/smu.h b/include/asm-powerpc/smu.h
index 76c29a9784dd..134c2b5be0f2 100644
--- a/include/asm-powerpc/smu.h
+++ b/include/asm-powerpc/smu.h
@@ -4,9 +4,11 @@
/*
* Definitions for talking to the SMU chip in newer G5 PowerMacs
*/
-
+#ifdef __KERNEL__
#include <linux/config.h>
#include <linux/list.h>
+#endif
+#include <linux/types.h>
/*
* Known SMU commands
@@ -356,6 +358,9 @@ extern unsigned long smu_cmdbuf_abs;
* Kenrel asynchronous i2c interface
*/
+#define SMU_I2C_READ_MAX 0x1d
+#define SMU_I2C_WRITE_MAX 0x15
+
/* SMU i2c header, exactly matches i2c header on wire */
struct smu_i2c_param
{
@@ -366,12 +371,9 @@ struct smu_i2c_param
u8 subaddr[3]; /* subaddress */
u8 caddr; /* combined address, filled by SMU driver */
u8 datalen; /* length of transfer */
- u8 data[7]; /* data */
+ u8 data[SMU_I2C_READ_MAX]; /* data */
};
-#define SMU_I2C_READ_MAX 0x0d
-#define SMU_I2C_WRITE_MAX 0x05
-
struct smu_i2c_cmd
{
/* public */
@@ -385,7 +387,7 @@ struct smu_i2c_cmd
int read;
int stage;
int retries;
- u8 pdata[0x10];
+ u8 pdata[32];
struct list_head link;
};
@@ -487,8 +489,8 @@ struct smu_sdbp_slotspow {
#define SMU_SDB_SENSORTREE_ID 0x25
struct smu_sdbp_sensortree {
- u8 model_id;
- u8 unknown[3];
+ __u8 model_id;
+ __u8 unknown[3];
};
/* This partition contains CPU thermal control PID informations. So far
@@ -498,13 +500,13 @@ struct smu_sdbp_sensortree {
#define SMU_SDB_CPUPIDDATA_ID 0x17
struct smu_sdbp_cpupiddata {
- u8 unknown1;
- u8 target_temp_delta;
- u8 unknown2;
- u8 history_len;
- s16 power_adj;
- u16 max_power;
- s32 gp,gr,gd;
+ __u8 unknown1;
+ __u8 target_temp_delta;
+ __u8 unknown2;
+ __u8 history_len;
+ __s16 power_adj;
+ __u16 max_power;
+ __s32 gp,gr,gd;
};
@@ -517,7 +519,7 @@ struct smu_sdbp_cpupiddata {
* if not found. The data format is described below
*/
extern struct smu_sdbp_header *smu_get_sdb_partition(int id,
- unsigned int *size);
+ unsigned int *size);
#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/sparsemem.h b/include/asm-powerpc/sparsemem.h
index ba1b34fdb967..38b1ea3b58fd 100644
--- a/include/asm-powerpc/sparsemem.h
+++ b/include/asm-powerpc/sparsemem.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_SPARSEMEM_H
#define _ASM_POWERPC_SPARSEMEM_H 1
+#ifdef __KERNEL__
#ifdef CONFIG_SPARSEMEM
/*
@@ -13,8 +14,17 @@
#ifdef CONFIG_MEMORY_HOTPLUG
extern void create_section_mapping(unsigned long start, unsigned long end);
+#ifdef CONFIG_NUMA
+extern int hot_add_scn_to_nid(unsigned long scn_addr);
+#else
+static inline int hot_add_scn_to_nid(unsigned long scn_addr)
+{
+ return 0;
+}
+#endif /* CONFIG_NUMA */
#endif /* CONFIG_MEMORY_HOTPLUG */
#endif /* CONFIG_SPARSEMEM */
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_SPARSEMEM_H */
diff --git a/include/asm-powerpc/spinlock.h b/include/asm-powerpc/spinlock.h
index caa4b14e0e94..754900901cd8 100644
--- a/include/asm-powerpc/spinlock.h
+++ b/include/asm-powerpc/spinlock.h
@@ -1,5 +1,6 @@
#ifndef __ASM_SPINLOCK_H
#define __ASM_SPINLOCK_H
+#ifdef __KERNEL__
/*
* Simple spin lock operations.
@@ -266,4 +267,5 @@ static __inline__ void __raw_write_unlock(raw_rwlock_t *rw)
rw->lock = 0;
}
+#endif /* __KERNEL__ */
#endif /* __ASM_SPINLOCK_H */
diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h
new file mode 100644
index 000000000000..38bacf2f6e0c
--- /dev/null
+++ b/include/asm-powerpc/spu.h
@@ -0,0 +1,600 @@
+/*
+ * SPU core / file system interface and HW structures
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * Author: Arnd Bergmann <arndb@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _SPU_H
+#define _SPU_H
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/kref.h>
+#include <linux/workqueue.h>
+
+#define LS_SIZE (256 * 1024)
+#define LS_ADDR_MASK (LS_SIZE - 1)
+
+#define MFC_PUT_CMD 0x20
+#define MFC_PUTS_CMD 0x28
+#define MFC_PUTR_CMD 0x30
+#define MFC_PUTF_CMD 0x22
+#define MFC_PUTB_CMD 0x21
+#define MFC_PUTFS_CMD 0x2A
+#define MFC_PUTBS_CMD 0x29
+#define MFC_PUTRF_CMD 0x32
+#define MFC_PUTRB_CMD 0x31
+#define MFC_PUTL_CMD 0x24
+#define MFC_PUTRL_CMD 0x34
+#define MFC_PUTLF_CMD 0x26
+#define MFC_PUTLB_CMD 0x25
+#define MFC_PUTRLF_CMD 0x36
+#define MFC_PUTRLB_CMD 0x35
+
+#define MFC_GET_CMD 0x40
+#define MFC_GETS_CMD 0x48
+#define MFC_GETF_CMD 0x42
+#define MFC_GETB_CMD 0x41
+#define MFC_GETFS_CMD 0x4A
+#define MFC_GETBS_CMD 0x49
+#define MFC_GETL_CMD 0x44
+#define MFC_GETLF_CMD 0x46
+#define MFC_GETLB_CMD 0x45
+
+#define MFC_SDCRT_CMD 0x80
+#define MFC_SDCRTST_CMD 0x81
+#define MFC_SDCRZ_CMD 0x89
+#define MFC_SDCRS_CMD 0x8D
+#define MFC_SDCRF_CMD 0x8F
+
+#define MFC_GETLLAR_CMD 0xD0
+#define MFC_PUTLLC_CMD 0xB4
+#define MFC_PUTLLUC_CMD 0xB0
+#define MFC_PUTQLLUC_CMD 0xB8
+#define MFC_SNDSIG_CMD 0xA0
+#define MFC_SNDSIGB_CMD 0xA1
+#define MFC_SNDSIGF_CMD 0xA2
+#define MFC_BARRIER_CMD 0xC0
+#define MFC_EIEIO_CMD 0xC8
+#define MFC_SYNC_CMD 0xCC
+
+#define MFC_MIN_DMA_SIZE_SHIFT 4 /* 16 bytes */
+#define MFC_MAX_DMA_SIZE_SHIFT 14 /* 16384 bytes */
+#define MFC_MIN_DMA_SIZE (1 << MFC_MIN_DMA_SIZE_SHIFT)
+#define MFC_MAX_DMA_SIZE (1 << MFC_MAX_DMA_SIZE_SHIFT)
+#define MFC_MIN_DMA_SIZE_MASK (MFC_MIN_DMA_SIZE - 1)
+#define MFC_MAX_DMA_SIZE_MASK (MFC_MAX_DMA_SIZE - 1)
+#define MFC_MIN_DMA_LIST_SIZE 0x0008 /* 8 bytes */
+#define MFC_MAX_DMA_LIST_SIZE 0x4000 /* 16K bytes */
+
+#define MFC_TAGID_TO_TAGMASK(tag_id) (1 << (tag_id & 0x1F))
+
+/* Events for Channels 0-2 */
+#define MFC_DMA_TAG_STATUS_UPDATE_EVENT 0x00000001
+#define MFC_DMA_TAG_CMD_STALL_NOTIFY_EVENT 0x00000002
+#define MFC_DMA_QUEUE_AVAILABLE_EVENT 0x00000008
+#define MFC_SPU_MAILBOX_WRITTEN_EVENT 0x00000010
+#define MFC_DECREMENTER_EVENT 0x00000020
+#define MFC_PU_INT_MAILBOX_AVAILABLE_EVENT 0x00000040
+#define MFC_PU_MAILBOX_AVAILABLE_EVENT 0x00000080
+#define MFC_SIGNAL_2_EVENT 0x00000100
+#define MFC_SIGNAL_1_EVENT 0x00000200
+#define MFC_LLR_LOST_EVENT 0x00000400
+#define MFC_PRIV_ATTN_EVENT 0x00000800
+#define MFC_MULTI_SRC_EVENT 0x00001000
+
+/* Flags indicating progress during context switch. */
+#define SPU_CONTEXT_SWITCH_PENDING 0UL
+#define SPU_CONTEXT_SWITCH_ACTIVE 1UL
+
+struct spu_context;
+struct spu_runqueue;
+
+struct spu {
+ char *name;
+ unsigned long local_store_phys;
+ u8 *local_store;
+ struct spu_problem __iomem *problem;
+ struct spu_priv1 __iomem *priv1;
+ struct spu_priv2 __iomem *priv2;
+ struct list_head list;
+ struct list_head sched_list;
+ int number;
+ u32 isrc;
+ u32 node;
+ u64 flags;
+ u64 dar;
+ u64 dsisr;
+ struct kref kref;
+ size_t ls_size;
+ unsigned int slb_replace;
+ struct mm_struct *mm;
+ struct spu_context *ctx;
+ struct spu_runqueue *rq;
+ unsigned long long timestamp;
+ pid_t pid;
+ int prio;
+ int class_0_pending;
+ spinlock_t register_lock;
+
+ u32 stop_code;
+ void (* wbox_callback)(struct spu *spu);
+ void (* ibox_callback)(struct spu *spu);
+ void (* stop_callback)(struct spu *spu);
+
+ char irq_c0[8];
+ char irq_c1[8];
+ char irq_c2[8];
+};
+
+struct spu *spu_alloc(void);
+void spu_free(struct spu *spu);
+int spu_irq_class_0_bottom(struct spu *spu);
+int spu_irq_class_1_bottom(struct spu *spu);
+void spu_irq_setaffinity(struct spu *spu, int cpu);
+
+extern struct spufs_calls {
+ asmlinkage long (*create_thread)(const char __user *name,
+ unsigned int flags, mode_t mode);
+ asmlinkage long (*spu_run)(struct file *filp, __u32 __user *unpc,
+ __u32 __user *ustatus);
+ struct module *owner;
+} spufs_calls;
+
+#ifdef CONFIG_SPU_FS_MODULE
+int register_spu_syscalls(struct spufs_calls *calls);
+void unregister_spu_syscalls(struct spufs_calls *calls);
+#else
+static inline int register_spu_syscalls(struct spufs_calls *calls)
+{
+ return 0;
+}
+static inline void unregister_spu_syscalls(struct spufs_calls *calls)
+{
+}
+#endif /* MODULE */
+
+
+/* access to priv1 registers */
+void spu_int_mask_and(struct spu *spu, int class, u64 mask);
+void spu_int_mask_or(struct spu *spu, int class, u64 mask);
+void spu_int_mask_set(struct spu *spu, int class, u64 mask);
+u64 spu_int_mask_get(struct spu *spu, int class);
+void spu_int_stat_clear(struct spu *spu, int class, u64 stat);
+u64 spu_int_stat_get(struct spu *spu, int class);
+void spu_int_route_set(struct spu *spu, u64 route);
+u64 spu_mfc_dar_get(struct spu *spu);
+u64 spu_mfc_dsisr_get(struct spu *spu);
+void spu_mfc_dsisr_set(struct spu *spu, u64 dsisr);
+void spu_mfc_sdr_set(struct spu *spu, u64 sdr);
+void spu_mfc_sr1_set(struct spu *spu, u64 sr1);
+u64 spu_mfc_sr1_get(struct spu *spu);
+void spu_mfc_tclass_id_set(struct spu *spu, u64 tclass_id);
+u64 spu_mfc_tclass_id_get(struct spu *spu);
+void spu_tlb_invalidate(struct spu *spu);
+void spu_resource_allocation_groupID_set(struct spu *spu, u64 id);
+u64 spu_resource_allocation_groupID_get(struct spu *spu);
+void spu_resource_allocation_enable_set(struct spu *spu, u64 enable);
+u64 spu_resource_allocation_enable_get(struct spu *spu);
+
+
+/*
+ * This defines the Local Store, Problem Area and Privlege Area of an SPU.
+ */
+
+union mfc_tag_size_class_cmd {
+ struct {
+ u16 mfc_size;
+ u16 mfc_tag;
+ u8 pad;
+ u8 mfc_rclassid;
+ u16 mfc_cmd;
+ } u;
+ struct {
+ u32 mfc_size_tag32;
+ u32 mfc_class_cmd32;
+ } by32;
+ u64 all64;
+};
+
+struct mfc_cq_sr {
+ u64 mfc_cq_data0_RW;
+ u64 mfc_cq_data1_RW;
+ u64 mfc_cq_data2_RW;
+ u64 mfc_cq_data3_RW;
+};
+
+struct spu_problem {
+#define MS_SYNC_PENDING 1L
+ u64 spc_mssync_RW; /* 0x0000 */
+ u8 pad_0x0008_0x3000[0x3000 - 0x0008];
+
+ /* DMA Area */
+ u8 pad_0x3000_0x3004[0x4]; /* 0x3000 */
+ u32 mfc_lsa_W; /* 0x3004 */
+ u64 mfc_ea_W; /* 0x3008 */
+ union mfc_tag_size_class_cmd mfc_union_W; /* 0x3010 */
+ u8 pad_0x3018_0x3104[0xec]; /* 0x3018 */
+ u32 dma_qstatus_R; /* 0x3104 */
+ u8 pad_0x3108_0x3204[0xfc]; /* 0x3108 */
+ u32 dma_querytype_RW; /* 0x3204 */
+ u8 pad_0x3208_0x321c[0x14]; /* 0x3208 */
+ u32 dma_querymask_RW; /* 0x321c */
+ u8 pad_0x3220_0x322c[0xc]; /* 0x3220 */
+ u32 dma_tagstatus_R; /* 0x322c */
+#define DMA_TAGSTATUS_INTR_ANY 1u
+#define DMA_TAGSTATUS_INTR_ALL 2u
+ u8 pad_0x3230_0x4000[0x4000 - 0x3230]; /* 0x3230 */
+
+ /* SPU Control Area */
+ u8 pad_0x4000_0x4004[0x4]; /* 0x4000 */
+ u32 pu_mb_R; /* 0x4004 */
+ u8 pad_0x4008_0x400c[0x4]; /* 0x4008 */
+ u32 spu_mb_W; /* 0x400c */
+ u8 pad_0x4010_0x4014[0x4]; /* 0x4010 */
+ u32 mb_stat_R; /* 0x4014 */
+ u8 pad_0x4018_0x401c[0x4]; /* 0x4018 */
+ u32 spu_runcntl_RW; /* 0x401c */
+#define SPU_RUNCNTL_STOP 0L
+#define SPU_RUNCNTL_RUNNABLE 1L
+ u8 pad_0x4020_0x4024[0x4]; /* 0x4020 */
+ u32 spu_status_R; /* 0x4024 */
+#define SPU_STOP_STATUS_SHIFT 16
+#define SPU_STATUS_STOPPED 0x0
+#define SPU_STATUS_RUNNING 0x1
+#define SPU_STATUS_STOPPED_BY_STOP 0x2
+#define SPU_STATUS_STOPPED_BY_HALT 0x4
+#define SPU_STATUS_WAITING_FOR_CHANNEL 0x8
+#define SPU_STATUS_SINGLE_STEP 0x10
+#define SPU_STATUS_INVALID_INSTR 0x20
+#define SPU_STATUS_INVALID_CH 0x40
+#define SPU_STATUS_ISOLATED_STATE 0x80
+#define SPU_STATUS_ISOLATED_LOAD_STAUTUS 0x200
+#define SPU_STATUS_ISOLATED_EXIT_STAUTUS 0x400
+ u8 pad_0x4028_0x402c[0x4]; /* 0x4028 */
+ u32 spu_spe_R; /* 0x402c */
+ u8 pad_0x4030_0x4034[0x4]; /* 0x4030 */
+ u32 spu_npc_RW; /* 0x4034 */
+ u8 pad_0x4038_0x14000[0x14000 - 0x4038]; /* 0x4038 */
+
+ /* Signal Notification Area */
+ u8 pad_0x14000_0x1400c[0xc]; /* 0x14000 */
+ u32 signal_notify1; /* 0x1400c */
+ u8 pad_0x14010_0x1c00c[0x7ffc]; /* 0x14010 */
+ u32 signal_notify2; /* 0x1c00c */
+} __attribute__ ((aligned(0x20000)));
+
+/* SPU Privilege 2 State Area */
+struct spu_priv2 {
+ /* MFC Registers */
+ u8 pad_0x0000_0x1100[0x1100 - 0x0000]; /* 0x0000 */
+
+ /* SLB Management Registers */
+ u8 pad_0x1100_0x1108[0x8]; /* 0x1100 */
+ u64 slb_index_W; /* 0x1108 */
+#define SLB_INDEX_MASK 0x7L
+ u64 slb_esid_RW; /* 0x1110 */
+ u64 slb_vsid_RW; /* 0x1118 */
+#define SLB_VSID_SUPERVISOR_STATE (0x1ull << 11)
+#define SLB_VSID_SUPERVISOR_STATE_MASK (0x1ull << 11)
+#define SLB_VSID_PROBLEM_STATE (0x1ull << 10)
+#define SLB_VSID_PROBLEM_STATE_MASK (0x1ull << 10)
+#define SLB_VSID_EXECUTE_SEGMENT (0x1ull << 9)
+#define SLB_VSID_NO_EXECUTE_SEGMENT (0x1ull << 9)
+#define SLB_VSID_EXECUTE_SEGMENT_MASK (0x1ull << 9)
+#define SLB_VSID_4K_PAGE (0x0 << 8)
+#define SLB_VSID_LARGE_PAGE (0x1ull << 8)
+#define SLB_VSID_PAGE_SIZE_MASK (0x1ull << 8)
+#define SLB_VSID_CLASS_MASK (0x1ull << 7)
+#define SLB_VSID_VIRTUAL_PAGE_SIZE_MASK (0x1ull << 6)
+ u64 slb_invalidate_entry_W; /* 0x1120 */
+ u64 slb_invalidate_all_W; /* 0x1128 */
+ u8 pad_0x1130_0x2000[0x2000 - 0x1130]; /* 0x1130 */
+
+ /* Context Save / Restore Area */
+ struct mfc_cq_sr spuq[16]; /* 0x2000 */
+ struct mfc_cq_sr puq[8]; /* 0x2200 */
+ u8 pad_0x2300_0x3000[0x3000 - 0x2300]; /* 0x2300 */
+
+ /* MFC Control */
+ u64 mfc_control_RW; /* 0x3000 */
+#define MFC_CNTL_RESUME_DMA_QUEUE (0ull << 0)
+#define MFC_CNTL_SUSPEND_DMA_QUEUE (1ull << 0)
+#define MFC_CNTL_SUSPEND_DMA_QUEUE_MASK (1ull << 0)
+#define MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION (0ull << 8)
+#define MFC_CNTL_SUSPEND_IN_PROGRESS (1ull << 8)
+#define MFC_CNTL_SUSPEND_COMPLETE (3ull << 8)
+#define MFC_CNTL_SUSPEND_DMA_STATUS_MASK (3ull << 8)
+#define MFC_CNTL_DMA_QUEUES_EMPTY (1ull << 14)
+#define MFC_CNTL_DMA_QUEUES_EMPTY_MASK (1ull << 14)
+#define MFC_CNTL_PURGE_DMA_REQUEST (1ull << 15)
+#define MFC_CNTL_PURGE_DMA_IN_PROGRESS (1ull << 24)
+#define MFC_CNTL_PURGE_DMA_COMPLETE (3ull << 24)
+#define MFC_CNTL_PURGE_DMA_STATUS_MASK (3ull << 24)
+#define MFC_CNTL_RESTART_DMA_COMMAND (1ull << 32)
+#define MFC_CNTL_DMA_COMMAND_REISSUE_PENDING (1ull << 32)
+#define MFC_CNTL_DMA_COMMAND_REISSUE_STATUS_MASK (1ull << 32)
+#define MFC_CNTL_MFC_PRIVILEGE_STATE (2ull << 33)
+#define MFC_CNTL_MFC_PROBLEM_STATE (3ull << 33)
+#define MFC_CNTL_MFC_KEY_PROTECTION_STATE_MASK (3ull << 33)
+#define MFC_CNTL_DECREMENTER_HALTED (1ull << 35)
+#define MFC_CNTL_DECREMENTER_RUNNING (1ull << 40)
+#define MFC_CNTL_DECREMENTER_STATUS_MASK (1ull << 40)
+ u8 pad_0x3008_0x4000[0x4000 - 0x3008]; /* 0x3008 */
+
+ /* Interrupt Mailbox */
+ u64 puint_mb_R; /* 0x4000 */
+ u8 pad_0x4008_0x4040[0x4040 - 0x4008]; /* 0x4008 */
+
+ /* SPU Control */
+ u64 spu_privcntl_RW; /* 0x4040 */
+#define SPU_PRIVCNTL_MODE_NORMAL (0x0ull << 0)
+#define SPU_PRIVCNTL_MODE_SINGLE_STEP (0x1ull << 0)
+#define SPU_PRIVCNTL_MODE_MASK (0x1ull << 0)
+#define SPU_PRIVCNTL_NO_ATTENTION_EVENT (0x0ull << 1)
+#define SPU_PRIVCNTL_ATTENTION_EVENT (0x1ull << 1)
+#define SPU_PRIVCNTL_ATTENTION_EVENT_MASK (0x1ull << 1)
+#define SPU_PRIVCNT_LOAD_REQUEST_NORMAL (0x0ull << 2)
+#define SPU_PRIVCNT_LOAD_REQUEST_ENABLE_MASK (0x1ull << 2)
+ u8 pad_0x4048_0x4058[0x10]; /* 0x4048 */
+ u64 spu_lslr_RW; /* 0x4058 */
+ u64 spu_chnlcntptr_RW; /* 0x4060 */
+ u64 spu_chnlcnt_RW; /* 0x4068 */
+ u64 spu_chnldata_RW; /* 0x4070 */
+ u64 spu_cfg_RW; /* 0x4078 */
+ u8 pad_0x4080_0x5000[0x5000 - 0x4080]; /* 0x4080 */
+
+ /* PV2_ImplRegs: Implementation-specific privileged-state 2 regs */
+ u64 spu_pm_trace_tag_status_RW; /* 0x5000 */
+ u64 spu_tag_status_query_RW; /* 0x5008 */
+#define TAG_STATUS_QUERY_CONDITION_BITS (0x3ull << 32)
+#define TAG_STATUS_QUERY_MASK_BITS (0xffffffffull)
+ u64 spu_cmd_buf1_RW; /* 0x5010 */
+#define SPU_COMMAND_BUFFER_1_LSA_BITS (0x7ffffull << 32)
+#define SPU_COMMAND_BUFFER_1_EAH_BITS (0xffffffffull)
+ u64 spu_cmd_buf2_RW; /* 0x5018 */
+#define SPU_COMMAND_BUFFER_2_EAL_BITS ((0xffffffffull) << 32)
+#define SPU_COMMAND_BUFFER_2_TS_BITS (0xffffull << 16)
+#define SPU_COMMAND_BUFFER_2_TAG_BITS (0x3full)
+ u64 spu_atomic_status_RW; /* 0x5020 */
+} __attribute__ ((aligned(0x20000)));
+
+/* SPU Privilege 1 State Area */
+struct spu_priv1 {
+ /* Control and Configuration Area */
+ u64 mfc_sr1_RW; /* 0x000 */
+#define MFC_STATE1_LOCAL_STORAGE_DECODE_MASK 0x01ull
+#define MFC_STATE1_BUS_TLBIE_MASK 0x02ull
+#define MFC_STATE1_REAL_MODE_OFFSET_ENABLE_MASK 0x04ull
+#define MFC_STATE1_PROBLEM_STATE_MASK 0x08ull
+#define MFC_STATE1_RELOCATE_MASK 0x10ull
+#define MFC_STATE1_MASTER_RUN_CONTROL_MASK 0x20ull
+ u64 mfc_lpid_RW; /* 0x008 */
+ u64 spu_idr_RW; /* 0x010 */
+ u64 mfc_vr_RO; /* 0x018 */
+#define MFC_VERSION_BITS (0xffff << 16)
+#define MFC_REVISION_BITS (0xffff)
+#define MFC_GET_VERSION_BITS(vr) (((vr) & MFC_VERSION_BITS) >> 16)
+#define MFC_GET_REVISION_BITS(vr) ((vr) & MFC_REVISION_BITS)
+ u64 spu_vr_RO; /* 0x020 */
+#define SPU_VERSION_BITS (0xffff << 16)
+#define SPU_REVISION_BITS (0xffff)
+#define SPU_GET_VERSION_BITS(vr) (vr & SPU_VERSION_BITS) >> 16
+#define SPU_GET_REVISION_BITS(vr) (vr & SPU_REVISION_BITS)
+ u8 pad_0x28_0x100[0x100 - 0x28]; /* 0x28 */
+
+
+ /* Interrupt Area */
+ u64 int_mask_RW[3]; /* 0x100 */
+#define CLASS0_ENABLE_DMA_ALIGNMENT_INTR 0x1L
+#define CLASS0_ENABLE_INVALID_DMA_COMMAND_INTR 0x2L
+#define CLASS0_ENABLE_SPU_ERROR_INTR 0x4L
+#define CLASS0_ENABLE_MFC_FIR_INTR 0x8L
+#define CLASS1_ENABLE_SEGMENT_FAULT_INTR 0x1L
+#define CLASS1_ENABLE_STORAGE_FAULT_INTR 0x2L
+#define CLASS1_ENABLE_LS_COMPARE_SUSPEND_ON_GET_INTR 0x4L
+#define CLASS1_ENABLE_LS_COMPARE_SUSPEND_ON_PUT_INTR 0x8L
+#define CLASS2_ENABLE_MAILBOX_INTR 0x1L
+#define CLASS2_ENABLE_SPU_STOP_INTR 0x2L
+#define CLASS2_ENABLE_SPU_HALT_INTR 0x4L
+#define CLASS2_ENABLE_SPU_DMA_TAG_GROUP_COMPLETE_INTR 0x8L
+ u8 pad_0x118_0x140[0x28]; /* 0x118 */
+ u64 int_stat_RW[3]; /* 0x140 */
+ u8 pad_0x158_0x180[0x28]; /* 0x158 */
+ u64 int_route_RW; /* 0x180 */
+
+ /* Interrupt Routing */
+ u8 pad_0x188_0x200[0x200 - 0x188]; /* 0x188 */
+
+ /* Atomic Unit Control Area */
+ u64 mfc_atomic_flush_RW; /* 0x200 */
+#define mfc_atomic_flush_enable 0x1L
+ u8 pad_0x208_0x280[0x78]; /* 0x208 */
+ u64 resource_allocation_groupID_RW; /* 0x280 */
+ u64 resource_allocation_enable_RW; /* 0x288 */
+ u8 pad_0x290_0x3c8[0x3c8 - 0x290]; /* 0x290 */
+
+ /* SPU_Cache_ImplRegs: Implementation-dependent cache registers */
+
+ u64 smf_sbi_signal_sel; /* 0x3c8 */
+#define smf_sbi_mask_lsb 56
+#define smf_sbi_shift (63 - smf_sbi_mask_lsb)
+#define smf_sbi_mask (0x301LL << smf_sbi_shift)
+#define smf_sbi_bus0_bits (0x001LL << smf_sbi_shift)
+#define smf_sbi_bus2_bits (0x100LL << smf_sbi_shift)
+#define smf_sbi2_bus0_bits (0x201LL << smf_sbi_shift)
+#define smf_sbi2_bus2_bits (0x300LL << smf_sbi_shift)
+ u64 smf_ato_signal_sel; /* 0x3d0 */
+#define smf_ato_mask_lsb 35
+#define smf_ato_shift (63 - smf_ato_mask_lsb)
+#define smf_ato_mask (0x3LL << smf_ato_shift)
+#define smf_ato_bus0_bits (0x2LL << smf_ato_shift)
+#define smf_ato_bus2_bits (0x1LL << smf_ato_shift)
+ u8 pad_0x3d8_0x400[0x400 - 0x3d8]; /* 0x3d8 */
+
+ /* TLB Management Registers */
+ u64 mfc_sdr_RW; /* 0x400 */
+ u8 pad_0x408_0x500[0xf8]; /* 0x408 */
+ u64 tlb_index_hint_RO; /* 0x500 */
+ u64 tlb_index_W; /* 0x508 */
+ u64 tlb_vpn_RW; /* 0x510 */
+ u64 tlb_rpn_RW; /* 0x518 */
+ u8 pad_0x520_0x540[0x20]; /* 0x520 */
+ u64 tlb_invalidate_entry_W; /* 0x540 */
+ u64 tlb_invalidate_all_W; /* 0x548 */
+ u8 pad_0x550_0x580[0x580 - 0x550]; /* 0x550 */
+
+ /* SPU_MMU_ImplRegs: Implementation-dependent MMU registers */
+ u64 smm_hid; /* 0x580 */
+#define PAGE_SIZE_MASK 0xf000000000000000ull
+#define PAGE_SIZE_16MB_64KB 0x2000000000000000ull
+ u8 pad_0x588_0x600[0x600 - 0x588]; /* 0x588 */
+
+ /* MFC Status/Control Area */
+ u64 mfc_accr_RW; /* 0x600 */
+#define MFC_ACCR_EA_ACCESS_GET (1 << 0)
+#define MFC_ACCR_EA_ACCESS_PUT (1 << 1)
+#define MFC_ACCR_LS_ACCESS_GET (1 << 3)
+#define MFC_ACCR_LS_ACCESS_PUT (1 << 4)
+ u8 pad_0x608_0x610[0x8]; /* 0x608 */
+ u64 mfc_dsisr_RW; /* 0x610 */
+#define MFC_DSISR_PTE_NOT_FOUND (1 << 30)
+#define MFC_DSISR_ACCESS_DENIED (1 << 27)
+#define MFC_DSISR_ATOMIC (1 << 26)
+#define MFC_DSISR_ACCESS_PUT (1 << 25)
+#define MFC_DSISR_ADDR_MATCH (1 << 22)
+#define MFC_DSISR_LS (1 << 17)
+#define MFC_DSISR_L (1 << 16)
+#define MFC_DSISR_ADDRESS_OVERFLOW (1 << 0)
+ u8 pad_0x618_0x620[0x8]; /* 0x618 */
+ u64 mfc_dar_RW; /* 0x620 */
+ u8 pad_0x628_0x700[0x700 - 0x628]; /* 0x628 */
+
+ /* Replacement Management Table (RMT) Area */
+ u64 rmt_index_RW; /* 0x700 */
+ u8 pad_0x708_0x710[0x8]; /* 0x708 */
+ u64 rmt_data1_RW; /* 0x710 */
+ u8 pad_0x718_0x800[0x800 - 0x718]; /* 0x718 */
+
+ /* Control/Configuration Registers */
+ u64 mfc_dsir_R; /* 0x800 */
+#define MFC_DSIR_Q (1 << 31)
+#define MFC_DSIR_SPU_QUEUE MFC_DSIR_Q
+ u64 mfc_lsacr_RW; /* 0x808 */
+#define MFC_LSACR_COMPARE_MASK ((~0ull) << 32)
+#define MFC_LSACR_COMPARE_ADDR ((~0ull) >> 32)
+ u64 mfc_lscrr_R; /* 0x810 */
+#define MFC_LSCRR_Q (1 << 31)
+#define MFC_LSCRR_SPU_QUEUE MFC_LSCRR_Q
+#define MFC_LSCRR_QI_SHIFT 32
+#define MFC_LSCRR_QI_MASK ((~0ull) << MFC_LSCRR_QI_SHIFT)
+ u8 pad_0x818_0x820[0x8]; /* 0x818 */
+ u64 mfc_tclass_id_RW; /* 0x820 */
+#define MFC_TCLASS_ID_ENABLE (1L << 0L)
+#define MFC_TCLASS_SLOT2_ENABLE (1L << 5L)
+#define MFC_TCLASS_SLOT1_ENABLE (1L << 6L)
+#define MFC_TCLASS_SLOT0_ENABLE (1L << 7L)
+#define MFC_TCLASS_QUOTA_2_SHIFT 8L
+#define MFC_TCLASS_QUOTA_1_SHIFT 16L
+#define MFC_TCLASS_QUOTA_0_SHIFT 24L
+#define MFC_TCLASS_QUOTA_2_MASK (0x1FL << MFC_TCLASS_QUOTA_2_SHIFT)
+#define MFC_TCLASS_QUOTA_1_MASK (0x1FL << MFC_TCLASS_QUOTA_1_SHIFT)
+#define MFC_TCLASS_QUOTA_0_MASK (0x1FL << MFC_TCLASS_QUOTA_0_SHIFT)
+ u8 pad_0x828_0x900[0x900 - 0x828]; /* 0x828 */
+
+ /* Real Mode Support Registers */
+ u64 mfc_rm_boundary; /* 0x900 */
+ u8 pad_0x908_0x938[0x30]; /* 0x908 */
+ u64 smf_dma_signal_sel; /* 0x938 */
+#define mfc_dma1_mask_lsb 41
+#define mfc_dma1_shift (63 - mfc_dma1_mask_lsb)
+#define mfc_dma1_mask (0x3LL << mfc_dma1_shift)
+#define mfc_dma1_bits (0x1LL << mfc_dma1_shift)
+#define mfc_dma2_mask_lsb 43
+#define mfc_dma2_shift (63 - mfc_dma2_mask_lsb)
+#define mfc_dma2_mask (0x3LL << mfc_dma2_shift)
+#define mfc_dma2_bits (0x1LL << mfc_dma2_shift)
+ u8 pad_0x940_0xa38[0xf8]; /* 0x940 */
+ u64 smm_signal_sel; /* 0xa38 */
+#define smm_sig_mask_lsb 12
+#define smm_sig_shift (63 - smm_sig_mask_lsb)
+#define smm_sig_mask (0x3LL << smm_sig_shift)
+#define smm_sig_bus0_bits (0x2LL << smm_sig_shift)
+#define smm_sig_bus2_bits (0x1LL << smm_sig_shift)
+ u8 pad_0xa40_0xc00[0xc00 - 0xa40]; /* 0xa40 */
+
+ /* DMA Command Error Area */
+ u64 mfc_cer_R; /* 0xc00 */
+#define MFC_CER_Q (1 << 31)
+#define MFC_CER_SPU_QUEUE MFC_CER_Q
+ u8 pad_0xc08_0x1000[0x1000 - 0xc08]; /* 0xc08 */
+
+ /* PV1_ImplRegs: Implementation-dependent privileged-state 1 regs */
+ /* DMA Command Error Area */
+ u64 spu_ecc_cntl_RW; /* 0x1000 */
+#define SPU_ECC_CNTL_E (1ull << 0ull)
+#define SPU_ECC_CNTL_ENABLE SPU_ECC_CNTL_E
+#define SPU_ECC_CNTL_DISABLE (~SPU_ECC_CNTL_E & 1L)
+#define SPU_ECC_CNTL_S (1ull << 1ull)
+#define SPU_ECC_STOP_AFTER_ERROR SPU_ECC_CNTL_S
+#define SPU_ECC_CONTINUE_AFTER_ERROR (~SPU_ECC_CNTL_S & 2L)
+#define SPU_ECC_CNTL_B (1ull << 2ull)
+#define SPU_ECC_BACKGROUND_ENABLE SPU_ECC_CNTL_B
+#define SPU_ECC_BACKGROUND_DISABLE (~SPU_ECC_CNTL_B & 4L)
+#define SPU_ECC_CNTL_I_SHIFT 3ull
+#define SPU_ECC_CNTL_I_MASK (3ull << SPU_ECC_CNTL_I_SHIFT)
+#define SPU_ECC_WRITE_ALWAYS (~SPU_ECC_CNTL_I & 12L)
+#define SPU_ECC_WRITE_CORRECTABLE (1ull << SPU_ECC_CNTL_I_SHIFT)
+#define SPU_ECC_WRITE_UNCORRECTABLE (3ull << SPU_ECC_CNTL_I_SHIFT)
+#define SPU_ECC_CNTL_D (1ull << 5ull)
+#define SPU_ECC_DETECTION_ENABLE SPU_ECC_CNTL_D
+#define SPU_ECC_DETECTION_DISABLE (~SPU_ECC_CNTL_D & 32L)
+ u64 spu_ecc_stat_RW; /* 0x1008 */
+#define SPU_ECC_CORRECTED_ERROR (1ull << 0ul)
+#define SPU_ECC_UNCORRECTED_ERROR (1ull << 1ul)
+#define SPU_ECC_SCRUB_COMPLETE (1ull << 2ul)
+#define SPU_ECC_SCRUB_IN_PROGRESS (1ull << 3ul)
+#define SPU_ECC_INSTRUCTION_ERROR (1ull << 4ul)
+#define SPU_ECC_DATA_ERROR (1ull << 5ul)
+#define SPU_ECC_DMA_ERROR (1ull << 6ul)
+#define SPU_ECC_STATUS_CNT_MASK (256ull << 8)
+ u64 spu_ecc_addr_RW; /* 0x1010 */
+ u64 spu_err_mask_RW; /* 0x1018 */
+#define SPU_ERR_ILLEGAL_INSTR (1ull << 0ul)
+#define SPU_ERR_ILLEGAL_CHANNEL (1ull << 1ul)
+ u8 pad_0x1020_0x1028[0x1028 - 0x1020]; /* 0x1020 */
+
+ /* SPU Debug-Trace Bus (DTB) Selection Registers */
+ u64 spu_trig0_sel; /* 0x1028 */
+ u64 spu_trig1_sel; /* 0x1030 */
+ u64 spu_trig2_sel; /* 0x1038 */
+ u64 spu_trig3_sel; /* 0x1040 */
+ u64 spu_trace_sel; /* 0x1048 */
+#define spu_trace_sel_mask 0x1f1fLL
+#define spu_trace_sel_bus0_bits 0x1000LL
+#define spu_trace_sel_bus2_bits 0x0010LL
+ u64 spu_event0_sel; /* 0x1050 */
+ u64 spu_event1_sel; /* 0x1058 */
+ u64 spu_event2_sel; /* 0x1060 */
+ u64 spu_event3_sel; /* 0x1068 */
+ u64 spu_trace_cntl; /* 0x1070 */
+} __attribute__ ((aligned(0x2000)));
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/asm-powerpc/spu_csa.h b/include/asm-powerpc/spu_csa.h
new file mode 100644
index 000000000000..ba18d7d4dde2
--- /dev/null
+++ b/include/asm-powerpc/spu_csa.h
@@ -0,0 +1,255 @@
+/*
+ * spu_csa.h: Definitions for SPU context save area (CSA).
+ *
+ * (C) Copyright IBM 2005
+ *
+ * Author: Mark Nutter <mnutter@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _SPU_CSA_H_
+#define _SPU_CSA_H_
+#ifdef __KERNEL__
+
+/*
+ * Total number of 128-bit registers.
+ */
+#define NR_SPU_GPRS 128
+#define NR_SPU_SPRS 9
+#define NR_SPU_REGS_PAD 7
+#define NR_SPU_SPILL_REGS 144 /* GPRS + SPRS + PAD */
+#define SIZEOF_SPU_SPILL_REGS NR_SPU_SPILL_REGS * 16
+
+#define SPU_SAVE_COMPLETE 0x3FFB
+#define SPU_RESTORE_COMPLETE 0x3FFC
+
+/*
+ * Definitions for various 'stopped' status conditions,
+ * to be recreated during context restore.
+ */
+#define SPU_STOPPED_STATUS_P 1
+#define SPU_STOPPED_STATUS_I 2
+#define SPU_STOPPED_STATUS_H 3
+#define SPU_STOPPED_STATUS_S 4
+#define SPU_STOPPED_STATUS_S_I 5
+#define SPU_STOPPED_STATUS_S_P 6
+#define SPU_STOPPED_STATUS_P_H 7
+#define SPU_STOPPED_STATUS_P_I 8
+#define SPU_STOPPED_STATUS_R 9
+
+#ifndef __ASSEMBLY__
+/**
+ * spu_reg128 - generic 128-bit register definition.
+ */
+struct spu_reg128 {
+ u32 slot[4];
+};
+
+/**
+ * struct spu_lscsa - Local Store Context Save Area.
+ * @gprs: Array of saved registers.
+ * @fpcr: Saved floating point status control register.
+ * @decr: Saved decrementer value.
+ * @decr_status: Indicates decrementer run status.
+ * @ppu_mb: Saved PPU mailbox data.
+ * @ppuint_mb: Saved PPU interrupting mailbox data.
+ * @tag_mask: Saved tag group mask.
+ * @event_mask: Saved event mask.
+ * @srr0: Saved SRR0.
+ * @stopped_status: Conditions to be recreated by restore.
+ * @ls: Saved contents of Local Storage Area.
+ *
+ * The LSCSA represents state that is primarily saved and
+ * restored by SPU-side code.
+ */
+struct spu_lscsa {
+ struct spu_reg128 gprs[128];
+ struct spu_reg128 fpcr;
+ struct spu_reg128 decr;
+ struct spu_reg128 decr_status;
+ struct spu_reg128 ppu_mb;
+ struct spu_reg128 ppuint_mb;
+ struct spu_reg128 tag_mask;
+ struct spu_reg128 event_mask;
+ struct spu_reg128 srr0;
+ struct spu_reg128 stopped_status;
+ struct spu_reg128 pad[119]; /* 'ls' must be page-aligned. */
+ unsigned char ls[LS_SIZE];
+};
+
+/*
+ * struct spu_problem_collapsed - condensed problem state area, w/o pads.
+ */
+struct spu_problem_collapsed {
+ u64 spc_mssync_RW;
+ u32 mfc_lsa_W;
+ u32 unused_pad0;
+ u64 mfc_ea_W;
+ union mfc_tag_size_class_cmd mfc_union_W;
+ u32 dma_qstatus_R;
+ u32 dma_querytype_RW;
+ u32 dma_querymask_RW;
+ u32 dma_tagstatus_R;
+ u32 pu_mb_R;
+ u32 spu_mb_W;
+ u32 mb_stat_R;
+ u32 spu_runcntl_RW;
+ u32 spu_status_R;
+ u32 spu_spc_R;
+ u32 spu_npc_RW;
+ u32 signal_notify1;
+ u32 signal_notify2;
+ u32 unused_pad1;
+};
+
+/*
+ * struct spu_priv1_collapsed - condensed privileged 1 area, w/o pads.
+ */
+struct spu_priv1_collapsed {
+ u64 mfc_sr1_RW;
+ u64 mfc_lpid_RW;
+ u64 spu_idr_RW;
+ u64 mfc_vr_RO;
+ u64 spu_vr_RO;
+ u64 int_mask_class0_RW;
+ u64 int_mask_class1_RW;
+ u64 int_mask_class2_RW;
+ u64 int_stat_class0_RW;
+ u64 int_stat_class1_RW;
+ u64 int_stat_class2_RW;
+ u64 int_route_RW;
+ u64 mfc_atomic_flush_RW;
+ u64 resource_allocation_groupID_RW;
+ u64 resource_allocation_enable_RW;
+ u64 mfc_fir_R;
+ u64 mfc_fir_status_or_W;
+ u64 mfc_fir_status_and_W;
+ u64 mfc_fir_mask_R;
+ u64 mfc_fir_mask_or_W;
+ u64 mfc_fir_mask_and_W;
+ u64 mfc_fir_chkstp_enable_RW;
+ u64 smf_sbi_signal_sel;
+ u64 smf_ato_signal_sel;
+ u64 mfc_sdr_RW;
+ u64 tlb_index_hint_RO;
+ u64 tlb_index_W;
+ u64 tlb_vpn_RW;
+ u64 tlb_rpn_RW;
+ u64 tlb_invalidate_entry_W;
+ u64 tlb_invalidate_all_W;
+ u64 smm_hid;
+ u64 mfc_accr_RW;
+ u64 mfc_dsisr_RW;
+ u64 mfc_dar_RW;
+ u64 rmt_index_RW;
+ u64 rmt_data1_RW;
+ u64 mfc_dsir_R;
+ u64 mfc_lsacr_RW;
+ u64 mfc_lscrr_R;
+ u64 mfc_tclass_id_RW;
+ u64 mfc_rm_boundary;
+ u64 smf_dma_signal_sel;
+ u64 smm_signal_sel;
+ u64 mfc_cer_R;
+ u64 pu_ecc_cntl_RW;
+ u64 pu_ecc_stat_RW;
+ u64 spu_ecc_addr_RW;
+ u64 spu_err_mask_RW;
+ u64 spu_trig0_sel;
+ u64 spu_trig1_sel;
+ u64 spu_trig2_sel;
+ u64 spu_trig3_sel;
+ u64 spu_trace_sel;
+ u64 spu_event0_sel;
+ u64 spu_event1_sel;
+ u64 spu_event2_sel;
+ u64 spu_event3_sel;
+ u64 spu_trace_cntl;
+};
+
+/*
+ * struct spu_priv2_collapsed - condensed priviliged 2 area, w/o pads.
+ */
+struct spu_priv2_collapsed {
+ u64 slb_index_W;
+ u64 slb_esid_RW;
+ u64 slb_vsid_RW;
+ u64 slb_invalidate_entry_W;
+ u64 slb_invalidate_all_W;
+ struct mfc_cq_sr spuq[16];
+ struct mfc_cq_sr puq[8];
+ u64 mfc_control_RW;
+ u64 puint_mb_R;
+ u64 spu_privcntl_RW;
+ u64 spu_lslr_RW;
+ u64 spu_chnlcntptr_RW;
+ u64 spu_chnlcnt_RW;
+ u64 spu_chnldata_RW;
+ u64 spu_cfg_RW;
+ u64 spu_tag_status_query_RW;
+ u64 spu_cmd_buf1_RW;
+ u64 spu_cmd_buf2_RW;
+ u64 spu_atomic_status_RW;
+};
+
+/**
+ * struct spu_state
+ * @lscsa: Local Store Context Save Area.
+ * @prob: Collapsed Problem State Area, w/o pads.
+ * @priv1: Collapsed Privileged 1 Area, w/o pads.
+ * @priv2: Collapsed Privileged 2 Area, w/o pads.
+ * @spu_chnlcnt_RW: Array of saved channel counts.
+ * @spu_chnldata_RW: Array of saved channel data.
+ * @suspend_time: Time stamp when decrementer disabled.
+ * @slb_esid_RW: Array of saved SLB esid entries.
+ * @slb_vsid_RW: Array of saved SLB vsid entries.
+ *
+ * Structure representing the whole of the SPU
+ * context save area (CSA). This struct contains
+ * all of the state necessary to suspend and then
+ * later optionally resume execution of an SPU
+ * context.
+ *
+ * The @lscsa region is by far the largest, and is
+ * allocated separately so that it may either be
+ * pinned or mapped to/from application memory, as
+ * appropriate for the OS environment.
+ */
+struct spu_state {
+ struct spu_lscsa *lscsa;
+ struct spu_problem_collapsed prob;
+ struct spu_priv1_collapsed priv1;
+ struct spu_priv2_collapsed priv2;
+ u64 spu_chnlcnt_RW[32];
+ u64 spu_chnldata_RW[32];
+ u32 spu_mailbox_data[4];
+ u32 pu_mailbox_data[1];
+ unsigned long suspend_time;
+ u64 slb_esid_RW[8];
+ u64 slb_vsid_RW[8];
+ spinlock_t register_lock;
+};
+
+extern void spu_init_csa(struct spu_state *csa);
+extern void spu_fini_csa(struct spu_state *csa);
+extern int spu_save(struct spu_state *prev, struct spu *spu);
+extern int spu_restore(struct spu_state *new, struct spu *spu);
+extern int spu_switch(struct spu_state *prev, struct spu_state *new,
+ struct spu *spu);
+
+#endif /* __KERNEL__ */
+#endif /* !__ASSEMBLY__ */
+#endif /* _SPU_CSA_H_ */
diff --git a/include/asm-powerpc/synch.h b/include/asm-powerpc/synch.h
index 4660c0394a77..794870ab8fd3 100644
--- a/include/asm-powerpc/synch.h
+++ b/include/asm-powerpc/synch.h
@@ -1,7 +1,6 @@
#ifndef _ASM_POWERPC_SYNCH_H
#define _ASM_POWERPC_SYNCH_H
-
-#include <linux/config.h>
+#ifdef __KERNEL__
#ifdef __powerpc64__
#define __SUBARCH_HAS_LWSYNC
@@ -47,5 +46,6 @@ static inline void isync(void)
#define isync_on_smp() __asm__ __volatile__("": : :"memory")
#endif
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_SYNCH_H */
diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h
index 5341b75c75cb..0c58e32a9570 100644
--- a/include/asm-powerpc/system.h
+++ b/include/asm-powerpc/system.h
@@ -4,7 +4,6 @@
#ifndef _ASM_POWERPC_SYSTEM_H
#define _ASM_POWERPC_SYSTEM_H
-#include <linux/config.h>
#include <linux/kernel.h>
#include <asm/hw_irq.h>
@@ -42,6 +41,7 @@
#define set_mb(var, value) do { var = value; mb(); } while (0)
#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+#ifdef __KERNEL__
#ifdef CONFIG_SMP
#define smp_mb() mb()
#define smp_rmb() rmb()
@@ -54,7 +54,6 @@
#define smp_read_barrier_depends() do { } while(0)
#endif /* CONFIG_SMP */
-#ifdef __KERNEL__
struct task_struct;
struct pt_regs;
diff --git a/include/asm-powerpc/tce.h b/include/asm-powerpc/tce.h
index 980a094fd5a7..6fa200ad7a7f 100644
--- a/include/asm-powerpc/tce.h
+++ b/include/asm-powerpc/tce.h
@@ -20,6 +20,7 @@
#ifndef _ASM_POWERPC_TCE_H
#define _ASM_POWERPC_TCE_H
+#ifdef __KERNEL__
/*
* Tces come in two formats, one for the virtual bus and a different
@@ -61,4 +62,5 @@ union tce_entry {
};
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_TCE_H */
diff --git a/include/asm-powerpc/thread_info.h b/include/asm-powerpc/thread_info.h
index e525f49bd179..ac1e80e6033e 100644
--- a/include/asm-powerpc/thread_info.h
+++ b/include/asm-powerpc/thread_info.h
@@ -37,8 +37,7 @@ struct thread_info {
int preempt_count; /* 0 => preemptable,
<0 => BUG */
struct restart_block restart_block;
- /* set by force_successful_syscall_return */
- unsigned char syscall_noerror;
+ void *nvgprs_frame;
/* low level flags - has atomic operations done on it */
unsigned long flags ____cacheline_aligned_in_smp;
};
@@ -123,6 +122,9 @@ static inline struct thread_info *current_thread_info(void)
#define TIF_SINGLESTEP 9 /* singlestepping active */
#define TIF_MEMDIE 10
#define TIF_SECCOMP 11 /* secure computing */
+#define TIF_RESTOREALL 12 /* Restore all regs (implies NOERROR) */
+#define TIF_SAVE_NVGPRS 13 /* Save r14-r31 in signal frame */
+#define TIF_NOERROR 14 /* Force successful syscall return */
/* as above, but as bit values */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
@@ -136,10 +138,14 @@ static inline struct thread_info *current_thread_info(void)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)
#define _TIF_SECCOMP (1<<TIF_SECCOMP)
+#define _TIF_RESTOREALL (1<<TIF_RESTOREALL)
+#define _TIF_SAVE_NVGPRS (1<<TIF_SAVE_NVGPRS)
+#define _TIF_NOERROR (1<<TIF_NOERROR)
#define _TIF_SYSCALL_T_OR_A (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP)
#define _TIF_USER_WORK_MASK (_TIF_NOTIFY_RESUME | _TIF_SIGPENDING | \
- _TIF_NEED_RESCHED)
+ _TIF_NEED_RESCHED | _TIF_RESTOREALL)
+#define _TIF_PERSYSCALL_MASK (_TIF_RESTOREALL|_TIF_NOERROR|_TIF_SAVE_NVGPRS)
#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/tlb.h b/include/asm-powerpc/tlb.h
index 56659f121779..601a53cf96d5 100644
--- a/include/asm-powerpc/tlb.h
+++ b/include/asm-powerpc/tlb.h
@@ -11,6 +11,7 @@
*/
#ifndef _ASM_POWERPC_TLB_H
#define _ASM_POWERPC_TLB_H
+#ifdef __KERNEL__
#include <linux/config.h>
#ifndef __powerpc64__
@@ -67,4 +68,5 @@ static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep,
}
#endif
+#endif /* __KERNEL__ */
#endif /* __ASM_POWERPC_TLB_H */
diff --git a/include/asm-powerpc/topology.h b/include/asm-powerpc/topology.h
index db8095cbe09b..9f3d4da261c4 100644
--- a/include/asm-powerpc/topology.h
+++ b/include/asm-powerpc/topology.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_TOPOLOGY_H
#define _ASM_POWERPC_TOPOLOGY_H
+#ifdef __KERNEL__
#include <linux/config.h>
@@ -55,10 +56,15 @@ static inline int node_to_first_cpu(int node)
.nr_balance_failed = 0, \
}
+extern void __init dump_numa_cpu_topology(void);
+
#else
+static inline void dump_numa_cpu_topology(void) {}
+
#include <asm-generic/topology.h>
#endif /* CONFIG_NUMA */
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_TOPOLOGY_H */
diff --git a/include/asm-powerpc/udbg.h b/include/asm-powerpc/udbg.h
index a383383bc4d4..479f2d8ff74a 100644
--- a/include/asm-powerpc/udbg.h
+++ b/include/asm-powerpc/udbg.h
@@ -9,12 +9,13 @@
#ifndef _ASM_POWERPC_UDBG_H
#define _ASM_POWERPC_UDBG_H
+#ifdef __KERNEL__
#include <linux/compiler.h>
#include <linux/init.h>
-extern void (*udbg_putc)(unsigned char c);
-extern unsigned char (*udbg_getc)(void);
+extern void (*udbg_putc)(char c);
+extern int (*udbg_getc)(void);
extern int (*udbg_getc_poll)(void);
extern void udbg_puts(const char *s);
@@ -23,9 +24,17 @@ extern int udbg_read(char *buf, int buflen);
extern void register_early_udbg_console(void);
extern void udbg_printf(const char *fmt, ...);
+extern void udbg_progress(char *s, unsigned short hex);
-extern void udbg_init_uart(void __iomem *comport, unsigned int speed);
+extern void udbg_init_uart(void __iomem *comport, unsigned int speed,
+ unsigned int clock);
+extern unsigned int udbg_probe_uart_speed(void __iomem *comport,
+ unsigned int clock);
struct device_node;
-extern void udbg_init_scc(struct device_node *np);
+extern void udbg_scc_init(int force_scc);
+extern int udbg_adb_init(int force_btext);
+extern void udbg_adb_init_early(void);
+
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_UDBG_H */
diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h
index 0991dfceef1d..19eaac3fbbf9 100644
--- a/include/asm-powerpc/unistd.h
+++ b/include/asm-powerpc/unistd.h
@@ -296,8 +296,10 @@
#define __NR_inotify_init 275
#define __NR_inotify_add_watch 276
#define __NR_inotify_rm_watch 277
+#define __NR_spu_run 278
+#define __NR_spu_create 279
-#define __NR_syscalls 278
+#define __NR_syscalls 280
#ifdef __KERNEL__
#define __NR__exit __NR_exit
diff --git a/include/asm-powerpc/vdso_datapage.h b/include/asm-powerpc/vdso_datapage.h
index 411832d5bbdb..7aa92086c3fb 100644
--- a/include/asm-powerpc/vdso_datapage.h
+++ b/include/asm-powerpc/vdso_datapage.h
@@ -1,5 +1,6 @@
#ifndef _VDSO_DATAPAGE_H
#define _VDSO_DATAPAGE_H
+#ifdef __KERNEL__
/*
* Copyright (C) 2002 Peter Bergner <bergner@vnet.ibm.com>, IBM
@@ -105,4 +106,5 @@ extern struct vdso_data *vdso_data;
#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
#endif /* _SYSTEMCFG_H */
diff --git a/include/asm-powerpc/vio.h b/include/asm-powerpc/vio.h
index e0ccf108277c..0544ece51761 100644
--- a/include/asm-powerpc/vio.h
+++ b/include/asm-powerpc/vio.h
@@ -13,6 +13,7 @@
#ifndef _ASM_POWERPC_VIO_H
#define _ASM_POWERPC_VIO_H
+#ifdef __KERNEL__
#include <linux/config.h>
#include <linux/init.h>
@@ -103,4 +104,5 @@ static inline struct vio_dev *to_vio_dev(struct device *dev)
return container_of(dev, struct vio_dev, dev);
}
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_VIO_H */
diff --git a/include/asm-ppc/bseip.h b/include/asm-ppc/bseip.h
deleted file mode 100644
index 691f4a52b0a5..000000000000
--- a/include/asm-ppc/bseip.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the Bright Star Engineering ip-Engine board. Copied from the MBX stuff.
- *
- * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
- */
-#ifndef __MACH_BSEIP_DEFS
-#define __MACH_BSEIP_DEFS
-
-#ifndef __ASSEMBLY__
-/* A Board Information structure that is given to a program when
- * prom starts it up.
- */
-typedef struct bd_info {
- unsigned int bi_memstart; /* Memory start address */
- unsigned int bi_memsize; /* Memory (end) size in bytes */
- unsigned int bi_intfreq; /* Internal Freq, in Hz */
- unsigned int bi_busfreq; /* Bus Freq, in Hz */
- unsigned char bi_enetaddr[6];
- unsigned int bi_baudrate;
-} bd_t;
-
-extern bd_t m8xx_board_info;
-
-/* Memory map is configured by the PROM startup.
- * All we need to get started is the IMMR.
- */
-#define IMAP_ADDR ((uint)0xff000000)
-#define IMAP_SIZE ((uint)(64 * 1024))
-#define PCMCIA_MEM_ADDR ((uint)0x04000000)
-#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
-#endif /* !__ASSEMBLY__ */
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS 0
-
-#endif
diff --git a/include/asm-ppc/btext.h b/include/asm-ppc/btext.h
index ccaefabe0bf5..ed3630251b3b 100644
--- a/include/asm-ppc/btext.h
+++ b/include/asm-ppc/btext.h
@@ -17,7 +17,7 @@ extern unsigned long disp_BAT[2];
extern boot_infos_t disp_bi;
extern int boot_text_mapped;
-extern void init_boot_display(void);
+extern void btext_init(boot_infos_t *bi);
extern void btext_welcome(void);
extern void btext_prepare_BAT(void);
extern void btext_setup_display(int width, int height, int depth, int pitch,
diff --git a/include/asm-ppc/machdep.h b/include/asm-ppc/machdep.h
index f01255bd1dc3..39200def8d11 100644
--- a/include/asm-ppc/machdep.h
+++ b/include/asm-ppc/machdep.h
@@ -35,8 +35,10 @@ struct machdep_calls {
int (*get_irq)(struct pt_regs *);
/* A general init function, called by ppc_init in init/main.c.
- May be NULL. */
+ May be NULL. DEPRECATED ! */
void (*init)(void);
+ /* For compatibility with merged platforms */
+ void (*init_early)(void);
void (*restart)(char *cmd);
void (*power_off)(void);
diff --git a/include/asm-ppc/mpc85xx.h b/include/asm-ppc/mpc85xx.h
index 9d14baea3d71..c8a96aa44fb7 100644
--- a/include/asm-ppc/mpc85xx.h
+++ b/include/asm-ppc/mpc85xx.h
@@ -37,6 +37,10 @@
#ifdef CONFIG_STX_GP3
#include <platforms/85xx/stx_gp3.h>
#endif
+#if defined(CONFIG_TQM8540) || defined(CONFIG_TQM8541) || \
+ defined(CONFIG_TQM8555) || defined(CONFIG_TQM8560)
+#include <platforms/85xx/tqm85xx.h>
+#endif
#define _IO_BASE isa_io_base
#define _ISA_MEM_BASE isa_mem_base
diff --git a/include/asm-ppc/pci-bridge.h b/include/asm-ppc/pci-bridge.h
index e58c78f90a5a..9d5230689b31 100644
--- a/include/asm-ppc/pci-bridge.h
+++ b/include/asm-ppc/pci-bridge.h
@@ -137,5 +137,14 @@ static inline unsigned char bridge_swizzle(unsigned char pin,
*/
extern int pciauto_bus_scan(struct pci_controller *, int);
+#ifdef CONFIG_PCI
+extern unsigned long pci_address_to_pio(phys_addr_t address);
+#else
+static inline unsigned long pci_address_to_pio(phys_addr_t address)
+{
+ return (unsigned long)-1;
+}
+#endif
+
#endif
#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/prom.h b/include/asm-ppc/prom.h
index 3e39827ed566..eb317a0806e4 100644
--- a/include/asm-ppc/prom.h
+++ b/include/asm-ppc/prom.h
@@ -136,5 +136,37 @@ extern unsigned long sub_reloc_offset(unsigned long);
#define PTRRELOC(x) ((typeof(x))add_reloc_offset((unsigned long)(x)))
#define PTRUNRELOC(x) ((typeof(x))sub_reloc_offset((unsigned long)(x)))
+
+/*
+ * OF address retreival & translation
+ */
+
+
+/* Translate an OF address block into a CPU physical address
+ */
+#define OF_BAD_ADDR ((u64)-1)
+extern u64 of_translate_address(struct device_node *np, u32 *addr);
+
+/* Extract an address from a device, returns the region size and
+ * the address space flags too. The PCI version uses a BAR number
+ * instead of an absolute index
+ */
+extern u32 *of_get_address(struct device_node *dev, int index,
+ u64 *size, unsigned int *flags);
+extern u32 *of_get_pci_address(struct device_node *dev, int bar_no,
+ u64 *size, unsigned int *flags);
+
+/* Get an address as a resource. Note that if your address is
+ * a PIO address, the conversion will fail if the physical address
+ * can't be internally converted to an IO token with
+ * pci_address_to_pio(), that is because it's either called to early
+ * or it can't be matched to any host bridge IO space
+ */
+extern int of_address_to_resource(struct device_node *dev, int index,
+ struct resource *r);
+extern int of_pci_address_to_resource(struct device_node *dev, int bar,
+ struct resource *r);
+
+
#endif /* _PPC_PROM_H */
#endif /* __KERNEL__ */
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index e2a089b051ed..d27a78b71297 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -196,6 +196,7 @@
#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */
#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */
#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */
+#define PCI_CAP_ID_HT_IRQCONF 0x08 /* HyperTransport IRQ Configuration */
#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */
#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */
diff --git a/include/linux/pmu.h b/include/linux/pmu.h
index 373bd3b9b330..217d3daf7336 100644
--- a/include/linux/pmu.h
+++ b/include/linux/pmu.h
@@ -140,7 +140,7 @@ extern int find_via_pmu(void);
extern int pmu_request(struct adb_request *req,
void (*done)(struct adb_request *), int nbytes, ...);
-
+extern int pmu_queue_request(struct adb_request *req);
extern void pmu_poll(void);
extern void pmu_poll_adb(void); /* For use by xmon */
extern void pmu_wait_complete(struct adb_request *req);
@@ -160,12 +160,6 @@ extern void pmu_unlock(void);
extern int pmu_present(void);
extern int pmu_get_model(void);
-extern int pmu_i2c_combined_read(int bus, int addr, int subaddr, u8* data, int len);
-extern int pmu_i2c_stdsub_write(int bus, int addr, int subaddr, u8* data, int len);
-extern int pmu_i2c_simple_read(int bus, int addr, u8* data, int len);
-extern int pmu_i2c_simple_write(int bus, int addr, u8* data, int len);
-
-
#ifdef CONFIG_PM
/*
* Stuff for putting the powerbook to sleep and waking it again.
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index e910d1a481df..3eed47347013 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -514,4 +514,9 @@ asmlinkage long sys_set_mempolicy(int mode, unsigned long __user *nmask,
asmlinkage long sys_migrate_pages(pid_t pid, unsigned long maxnode,
const unsigned long __user *from, const unsigned long __user *to);
+asmlinkage long sys_spu_run(int fd, __u32 __user *unpc,
+ __u32 __user *ustatus);
+asmlinkage long sys_spu_create(const char __user *name,
+ unsigned int flags, mode_t mode);
+
#endif
diff --git a/kernel/crash_dump.c b/kernel/crash_dump.c
index 334c37f5218a..fccb27dbc623 100644
--- a/kernel/crash_dump.c
+++ b/kernel/crash_dump.c
@@ -14,10 +14,12 @@
#include <asm/io.h>
#include <asm/uaccess.h>
+#include <asm/kexec.h>
/* Stores the physical address of elf header of crash image. */
unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
+#ifndef HAVE_ARCH_COPY_OLDMEM_PAGE
/**
* copy_oldmem_page - copy one page from "oldmem"
* @pfn: page frame number to be copied
@@ -59,3 +61,4 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
kfree(page);
return csize;
}
+#endif
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index bd3b9bfcfcec..17313b99e53d 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -112,3 +112,5 @@ cond_syscall(sys_pciconfig_iobase);
cond_syscall(sys32_ipc);
cond_syscall(sys32_sysctl);
cond_syscall(ppc_rtas);
+cond_syscall(sys_spu_run);
+cond_syscall(sys_spu_create);
diff --git a/mm/memory.c b/mm/memory.c
index 7197f9bcd384..3944fec38012 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -2267,6 +2267,8 @@ int __handle_mm_fault(struct mm_struct *mm, struct vm_area_struct *vma,
return handle_pte_fault(mm, vma, address, pte, pmd, write_access);
}
+EXPORT_SYMBOL_GPL(__handle_mm_fault);
+
#ifndef __PAGETABLE_PUD_FOLDED
/*
* Allocate page upper directory.
diff --git a/sound/oss/dmasound/dmasound_awacs.c b/sound/oss/dmasound/dmasound_awacs.c
index cebd881b91ae..74f975676ccb 100644
--- a/sound/oss/dmasound/dmasound_awacs.c
+++ b/sound/oss/dmasound/dmasound_awacs.c
@@ -125,6 +125,7 @@ static int awacs_rate_index;
static int awacs_subframe;
static struct device_node* awacs_node;
static struct device_node* i2s_node;
+static struct resource awacs_rsrc[3];
static char awacs_name[64];
static int awacs_revision;
@@ -667,9 +668,12 @@ static void PMacIrqCleanup(void)
iounmap(awacs_txdma);
iounmap(awacs_rxdma);
- release_OF_resource(awacs_node, 0);
- release_OF_resource(awacs_node, 1);
- release_OF_resource(awacs_node, 2);
+ release_mem_region(awacs_rsrc[0].start,
+ awacs_rsrc[0].end - awacs_rsrc[0].start + 1);
+ release_mem_region(awacs_rsrc[1].start,
+ awacs_rsrc[1].end - awacs_rsrc[1].start + 1);
+ release_mem_region(awacs_rsrc[2].start,
+ awacs_rsrc[2].end - awacs_rsrc[2].start + 1);
kfree(awacs_tx_cmd_space);
kfree(awacs_rx_cmd_space);
@@ -2863,46 +2867,58 @@ printk("dmasound_pmac: couldn't find a Codec we can handle\n");
* other info if necessary (early AWACS we want to read chip ids)
*/
- if (io->n_addrs < 3 || io->n_intrs < 3) {
+ if (of_get_address(io, 2, NULL, NULL) == NULL || io->n_intrs < 3) {
/* OK - maybe we need to use the 'awacs' node (on earlier
* machines).
- */
+ */
if (awacs_node) {
io = awacs_node ;
- if (io->n_addrs < 3 || io->n_intrs < 3) {
- printk("dmasound_pmac: can't use %s"
- " (%d addrs, %d intrs)\n",
- io->full_name, io->n_addrs, io->n_intrs);
+ if (of_get_address(io, 2, NULL, NULL) == NULL ||
+ io->n_intrs < 3) {
+ printk("dmasound_pmac: can't use %s\n",
+ io->full_name);
return -ENODEV;
}
- } else {
- printk("dmasound_pmac: can't use %s (%d addrs, %d intrs)\n",
- io->full_name, io->n_addrs, io->n_intrs);
- }
+ } else
+ printk("dmasound_pmac: can't use %s\n", io->full_name);
}
- if (!request_OF_resource(io, 0, NULL)) {
+ if (of_address_to_resource(io, 0, &awacs_rsrc[0]) ||
+ request_mem_region(awacs_rsrc[0].start,
+ awacs_rsrc[0].end - awacs_rsrc[0].start + 1,
+ " (IO)") == NULL) {
printk(KERN_ERR "dmasound: can't request IO resource !\n");
return -ENODEV;
}
- if (!request_OF_resource(io, 1, " (tx dma)")) {
- release_OF_resource(io, 0);
- printk(KERN_ERR "dmasound: can't request TX DMA resource !\n");
+ if (of_address_to_resource(io, 1, &awacs_rsrc[1]) ||
+ request_mem_region(awacs_rsrc[1].start,
+ awacs_rsrc[1].end - awacs_rsrc[1].start + 1,
+ " (tx dma)") == NULL) {
+ release_mem_region(awacs_rsrc[0].start,
+ awacs_rsrc[0].end - awacs_rsrc[0].start + 1);
+ printk(KERN_ERR "dmasound: can't request Tx DMA resource !\n");
return -ENODEV;
}
-
- if (!request_OF_resource(io, 2, " (rx dma)")) {
- release_OF_resource(io, 0);
- release_OF_resource(io, 1);
- printk(KERN_ERR "dmasound: can't request RX DMA resource !\n");
+ if (of_address_to_resource(io, 2, &awacs_rsrc[2]) ||
+ request_mem_region(awacs_rsrc[2].start,
+ awacs_rsrc[2].end - awacs_rsrc[2].start + 1,
+ " (rx dma)") == NULL) {
+ release_mem_region(awacs_rsrc[0].start,
+ awacs_rsrc[0].end - awacs_rsrc[0].start + 1);
+ release_mem_region(awacs_rsrc[1].start,
+ awacs_rsrc[1].end - awacs_rsrc[1].start + 1);
+ printk(KERN_ERR "dmasound: can't request Rx DMA resource !\n");
return -ENODEV;
}
awacs_beep_dev = input_allocate_device();
if (!awacs_beep_dev) {
- release_OF_resource(io, 0);
- release_OF_resource(io, 1);
- release_OF_resource(io, 2);
+ release_mem_region(awacs_rsrc[0].start,
+ awacs_rsrc[0].end - awacs_rsrc[0].start + 1);
+ release_mem_region(awacs_rsrc[1].start,
+ awacs_rsrc[1].end - awacs_rsrc[1].start + 1);
+ release_mem_region(awacs_rsrc[2].start,
+ awacs_rsrc[2].end - awacs_rsrc[2].start + 1);
printk(KERN_ERR "dmasound: can't allocate input device !\n");
return -ENOMEM;
}
@@ -2916,11 +2932,11 @@ printk("dmasound_pmac: couldn't find a Codec we can handle\n");
/* all OF versions I've seen use this value */
if (i2s_node)
- i2s = ioremap(io->addrs[0].address, 0x1000);
+ i2s = ioremap(awacs_rsrc[0].start, 0x1000);
else
- awacs = ioremap(io->addrs[0].address, 0x1000);
- awacs_txdma = ioremap(io->addrs[1].address, 0x100);
- awacs_rxdma = ioremap(io->addrs[2].address, 0x100);
+ awacs = ioremap(awacs_rsrc[0].start, 0x1000);
+ awacs_txdma = ioremap(awacs_rsrc[1].start, 0x100);
+ awacs_rxdma = ioremap(awacs_rsrc[2].start, 0x100);
/* first of all make sure that the chip is powered up....*/
pmac_call_feature(PMAC_FTR_SOUND_CHIP_ENABLE, io, 0, 1);
@@ -3083,9 +3099,10 @@ printk("dmasound_pmac: Awacs/Screamer Codec Mfct: %d Rev %d\n", mfg, rev);
struct device_node* mio;
macio_base = NULL;
for (mio = io->parent; mio; mio = mio->parent) {
- if (strcmp(mio->name, "mac-io") == 0
- && mio->n_addrs > 0) {
- macio_base = ioremap(mio->addrs[0].address, 0x40);
+ if (strcmp(mio->name, "mac-io") == 0) {
+ struct resource r;
+ if (of_address_to_resource(mio, 0, &r) == 0)
+ macio_base = ioremap(r.start, 0x40);
break;
}
}
diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c
index 9b2b00fdc1ae..a642e4cfcf45 100644
--- a/sound/ppc/pmac.c
+++ b/sound/ppc/pmac.c
@@ -803,21 +803,17 @@ static int snd_pmac_free(struct snd_pmac *chip)
iounmap(chip->playback.dma);
if (chip->capture.dma)
iounmap(chip->capture.dma);
-#ifndef CONFIG_PPC64
+
if (chip->node) {
int i;
-
for (i = 0; i < 3; i++) {
- if (chip->of_requested & (1 << i)) {
- if (chip->is_k2)
- release_OF_resource(chip->node->parent,
- i);
- else
- release_OF_resource(chip->node, i);
- }
+ if (chip->requested & (1 << i))
+ release_mem_region(chip->rsrc[i].start,
+ chip->rsrc[i].end -
+ chip->rsrc[i].start + 1);
}
}
-#endif /* CONFIG_PPC64 */
+
if (chip->pdev)
pci_dev_put(chip->pdev);
kfree(chip);
@@ -991,6 +987,11 @@ static int __init snd_pmac_detect(struct snd_pmac *chip)
chip->can_byte_swap = 0; /* FIXME: check this */
chip->control_mask = MASK_IEPC | 0x11;/* disable IEE */
break;
+ default:
+ printk(KERN_ERR "snd: Unknown layout ID 0x%x\n",
+ layout_id);
+ return -ENODEV;
+
}
}
prop = (unsigned int *)get_property(sound, "device-id", NULL);
@@ -1175,46 +1176,69 @@ int __init snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return)
}
np = chip->node;
+ chip->requested = 0;
if (chip->is_k2) {
- if (np->parent->n_addrs < 2 || np->n_intrs < 3) {
+ static char *rnames[] = {
+ "Sound Control", "Sound DMA" };
+ if (np->n_intrs < 3) {
err = -ENODEV;
goto __error;
}
- for (i = 0; i < 2; i++) {
-#ifndef CONFIG_PPC64
- static char *name[2] = { "- Control", "- DMA" };
- if (! request_OF_resource(np->parent, i, name[i])) {
- snd_printk(KERN_ERR "pmac: can't request resource %d!\n", i);
+ for (i = 0; i < 2; i ++) {
+ if (of_address_to_resource(np->parent, i,
+ &chip->rsrc[i])) {
+ printk(KERN_ERR "snd: can't translate rsrc "
+ " %d (%s)\n", i, rnames[i]);
+ err = -ENODEV;
+ goto __error;
+ }
+ if (request_mem_region(chip->rsrc[i].start,
+ chip->rsrc[i].end -
+ chip->rsrc[i].start + 1,
+ rnames[i]) == NULL) {
+ printk(KERN_ERR "snd: can't request rsrc "
+ " %d (%s: 0x%08lx:%08lx)\n",
+ i, rnames[i], chip->rsrc[i].start,
+ chip->rsrc[i].end);
err = -ENODEV;
goto __error;
}
- chip->of_requested |= (1 << i);
-#endif /* CONFIG_PPC64 */
- ctrl_addr = np->parent->addrs[0].address;
- txdma_addr = np->parent->addrs[1].address;
- rxdma_addr = txdma_addr + 0x100;
+ chip->requested |= (1 << i);
}
-
+ ctrl_addr = chip->rsrc[0].start;
+ txdma_addr = chip->rsrc[1].start;
+ rxdma_addr = txdma_addr + 0x100;
} else {
- if (np->n_addrs < 3 || np->n_intrs < 3) {
+ static char *rnames[] = {
+ "Sound Control", "Sound Tx DMA", "Sound Rx DMA" };
+ if (np->n_intrs < 3) {
err = -ENODEV;
goto __error;
}
-
- for (i = 0; i < 3; i++) {
-#ifndef CONFIG_PPC64
- static char *name[3] = { "- Control", "- Tx DMA", "- Rx DMA" };
- if (! request_OF_resource(np, i, name[i])) {
- snd_printk(KERN_ERR "pmac: can't request resource %d!\n", i);
+ for (i = 0; i < 3; i ++) {
+ if (of_address_to_resource(np->parent, i,
+ &chip->rsrc[i])) {
+ printk(KERN_ERR "snd: can't translate rsrc "
+ " %d (%s)\n", i, rnames[i]);
+ err = -ENODEV;
+ goto __error;
+ }
+ if (request_mem_region(chip->rsrc[i].start,
+ chip->rsrc[i].end -
+ chip->rsrc[i].start + 1,
+ rnames[i]) == NULL) {
+ printk(KERN_ERR "snd: can't request rsrc "
+ " %d (%s: 0x%08lx:%08lx)\n",
+ i, rnames[i], chip->rsrc[i].start,
+ chip->rsrc[i].end);
err = -ENODEV;
goto __error;
}
- chip->of_requested |= (1 << i);
-#endif /* CONFIG_PPC64 */
- ctrl_addr = np->addrs[0].address;
- txdma_addr = np->addrs[1].address;
- rxdma_addr = np->addrs[2].address;
+ chip->requested |= (1 << i);
}
+ ctrl_addr = chip->rsrc[0].start;
+ txdma_addr = chip->rsrc[1].start;
+ rxdma_addr = chip->rsrc[2].start;
}
chip->awacs = ioremap(ctrl_addr, 0x1000);
@@ -1266,9 +1290,11 @@ int __init snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return)
} else if (chip->is_pbook_G3) {
struct device_node* mio;
for (mio = chip->node->parent; mio; mio = mio->parent) {
- if (strcmp(mio->name, "mac-io") == 0
- && mio->n_addrs > 0) {
- chip->macio_base = ioremap(mio->addrs[0].address, 0x40);
+ if (strcmp(mio->name, "mac-io") == 0) {
+ struct resource r;
+ if (of_address_to_resource(mio, 0, &r) == 0)
+ chip->macio_base =
+ ioremap(r.start, 0x40);
break;
}
}
diff --git a/sound/ppc/pmac.h b/sound/ppc/pmac.h
index 086da7a18909..3a9bd4dbb9a6 100644
--- a/sound/ppc/pmac.h
+++ b/sound/ppc/pmac.h
@@ -113,7 +113,8 @@ struct snd_pmac {
unsigned int initialized : 1;
unsigned int feature_is_set : 1;
- unsigned int of_requested;
+ unsigned int requested;
+ struct resource rsrc[3];
int num_freqs;
int *freq_table;