summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/ppc/boot/common/ns16550.c3
-rw-r--r--arch/ppc/boot/simple/embed_config.c3
-rw-r--r--arch/ppc/platforms/4xx/Kconfig5
-rw-r--r--arch/ppc/platforms/4xx/virtex.c88
-rw-r--r--arch/ppc/platforms/4xx/virtex.h86
-rw-r--r--arch/ppc/platforms/4xx/xparameters/xparameters.h21
-rw-r--r--include/asm-ppc/ppc_sys.h2
7 files changed, 80 insertions, 128 deletions
diff --git a/arch/ppc/boot/common/ns16550.c b/arch/ppc/boot/common/ns16550.c
index 26818bbb6cff..4f00c93ac870 100644
--- a/arch/ppc/boot/common/ns16550.c
+++ b/arch/ppc/boot/common/ns16550.c
@@ -8,6 +8,9 @@
#include <linux/serial_reg.h>
#include <asm/serial.h>
+#if defined(CONFIG_XILINX_VIRTEX)
+#include <platforms/4xx/xparameters/xparameters.h>
+#endif
#include "nonstdio.h"
#include "serial.h"
diff --git a/arch/ppc/boot/simple/embed_config.c b/arch/ppc/boot/simple/embed_config.c
index 491a691d10cc..df24202073bf 100644
--- a/arch/ppc/boot/simple/embed_config.c
+++ b/arch/ppc/boot/simple/embed_config.c
@@ -21,6 +21,9 @@
#ifdef CONFIG_40x
#include <asm/io.h>
#endif
+#ifdef CONFIG_XILINX_VIRTEX
+#include <platforms/4xx/xparameters/xparameters.h>
+#endif
extern unsigned long timebase_period_ns;
/* For those boards that don't provide one.
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
index 203abab32cc3..057c7c2ab99d 100644
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -172,11 +172,6 @@ config IBM_OCP
depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
default y
-config XILINX_OCP
- bool
- depends on XILINX_ML300
- default y
-
config IBM_EMAC4
bool
depends on 440GX || 440SP || 440SPE
diff --git a/arch/ppc/platforms/4xx/virtex.c b/arch/ppc/platforms/4xx/virtex.c
index bbb12c0c0b2c..133a83147199 100644
--- a/arch/ppc/platforms/4xx/virtex.c
+++ b/arch/ppc/platforms/4xx/virtex.c
@@ -1,60 +1,56 @@
/*
- * arch/ppc/platforms/4xx/virtex.c
+ * Virtex-II Pro & Virtex-4 FX common infrastructure
*
- * Author: MontaVista Software, Inc.
- * source@mvista.com
+ * Maintainer: Grant Likely <grant.likely@secretlab.ca>
*
- * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
+ * Copyright 2005 Secret Lab Technologies Ltd.
+ * Copyright 2005 General Dynamics Canada Ltd.
+ * Copyright 2005 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
*/
-#include <linux/config.h>
#include <linux/init.h>
-#include <asm/ocp.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/serial_8250.h>
+#include <asm/ppc_sys.h>
#include <platforms/4xx/virtex.h>
+#include <platforms/4xx/xparameters/xparameters.h>
+
+#define XPAR_UART(num) { \
+ .mapbase = XPAR_UARTNS550_##num##_BASEADDR + 3, \
+ .irq = XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \
+ .iotype = UPIO_MEM, \
+ .uartclk = XPAR_UARTNS550_##num##_CLOCK_FREQ_HZ, \
+ .flags = UPF_BOOT_AUTOCONF, \
+ .regshift = 2, \
+ }
-/* Have OCP take care of the serial ports. */
-struct ocp_def core_ocp[] = {
+struct plat_serial8250_port serial_platform_data[] = {
#ifdef XPAR_UARTNS550_0_BASEADDR
- { .vendor = OCP_VENDOR_XILINX,
- .function = OCP_FUNC_16550,
- .index = 0,
- .paddr = XPAR_UARTNS550_0_BASEADDR,
- .irq = XPAR_INTC_0_UARTNS550_0_VEC_ID,
- .pm = OCP_CPM_NA
- },
+ XPAR_UART(0),
+#endif
#ifdef XPAR_UARTNS550_1_BASEADDR
- { .vendor = OCP_VENDOR_XILINX,
- .function = OCP_FUNC_16550,
- .index = 1,
- .paddr = XPAR_UARTNS550_1_BASEADDR,
- .irq = XPAR_INTC_0_UARTNS550_1_VEC_ID,
- .pm = OCP_CPM_NA
- },
+ XPAR_UART(1),
+#endif
#ifdef XPAR_UARTNS550_2_BASEADDR
- { .vendor = OCP_VENDOR_XILINX,
- .function = OCP_FUNC_16550,
- .index = 2,
- .paddr = XPAR_UARTNS550_2_BASEADDR,
- .irq = XPAR_INTC_0_UARTNS550_2_VEC_ID,
- .pm = OCP_CPM_NA
- },
+ XPAR_UART(2),
+#endif
#ifdef XPAR_UARTNS550_3_BASEADDR
- { .vendor = OCP_VENDOR_XILINX,
- .function = OCP_FUNC_16550,
- .index = 3,
- .paddr = XPAR_UARTNS550_3_BASEADDR,
- .irq = XPAR_INTC_0_UARTNS550_3_VEC_ID,
- .pm = OCP_CPM_NA
+ XPAR_UART(3),
+#endif
+ { }, /* terminated by empty record */
+};
+
+struct platform_device ppc_sys_platform_devices[] = {
+ [VIRTEX_UART] = {
+ .name = "serial8250",
+ .id = 0,
+ .dev.platform_data = serial_platform_data,
},
-#ifdef XPAR_UARTNS550_4_BASEADDR
-#error Edit this file to add more devices.
-#endif /* 4 */
-#endif /* 3 */
-#endif /* 2 */
-#endif /* 1 */
-#endif /* 0 */
- { .vendor = OCP_VENDOR_INVALID
- }
};
+
diff --git a/arch/ppc/platforms/4xx/virtex.h b/arch/ppc/platforms/4xx/virtex.h
index 049c767d33e7..1a01b81cff11 100644
--- a/arch/ppc/platforms/4xx/virtex.h
+++ b/arch/ppc/platforms/4xx/virtex.h
@@ -15,85 +15,21 @@
#ifndef __ASM_VIRTEX_H__
#define __ASM_VIRTEX_H__
-#include <linux/config.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-
/* serial defines */
-#define RS_TABLE_SIZE 4 /* change this and add more devices below
- if you have more then 4 16x50 UARTs */
-
-#define BASE_BAUD (XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16)
-
-/* The serial ports in the Virtex-II Pro have each I/O byte in the
- * LSByte of a word. This means that iomem_reg_shift needs to be 2 to
- * change the byte offsets into word offsets. In addition the base
- * addresses need to have 3 added to them to get to the LSByte.
- */
-#define STD_UART_OP(num) \
- { 0, BASE_BAUD, 0, XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \
- ASYNC_BOOT_AUTOCONF, \
- .iomem_base = (u8 *)XPAR_UARTNS550_##num##_BASEADDR + 3, \
- .iomem_reg_shift = 2, \
- .io_type = SERIAL_IO_MEM},
-
-#if defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
-#define ML300_UART0 STD_UART_OP(0)
-#else
-#define ML300_UART0
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
-#define ML300_UART1 STD_UART_OP(1)
-#else
-#define ML300_UART1
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
-#define ML300_UART2 STD_UART_OP(2)
-#else
-#define ML300_UART2
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
-#define ML300_UART3 STD_UART_OP(3)
-#else
-#define ML300_UART3
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_4_VEC_ID)
-#error Edit this file to add more devices.
-#elif defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
-#define NR_SER_PORTS 4
-#elif defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
-#define NR_SER_PORTS 3
-#elif defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
-#define NR_SER_PORTS 2
-#elif defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
-#define NR_SER_PORTS 1
-#else
-#define NR_SER_PORTS 0
-#endif
+#include <asm/ibm405.h>
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_PORT_DFNS \
- ML300_UART0 \
- ML300_UART1 \
- ML300_UART2 \
- ML300_UART3
+/* Ugly, ugly, ugly! BASE_BAUD defined here to keep 8250.c happy. */
+#if !defined(BASE_BAUD)
+ #define BASE_BAUD (0) /* dummy value; not used */
#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_PORT_DFNS \
- ML300_UART1 \
- ML300_UART0 \
- ML300_UART2 \
- ML300_UART3
+
+/* Device type enumeration for platform bus definitions */
+#ifndef __ASSEMBLY__
+enum ppc_sys_devices {
+ VIRTEX_UART,
+};
#endif
-
-#define DCRN_CPMFR_BASE 0
-
-#include <asm/ibm405.h>
-
+
#endif /* __ASM_VIRTEX_H__ */
#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters.h b/arch/ppc/platforms/4xx/xparameters/xparameters.h
index fe4eac629139..7b7304379dd2 100644
--- a/arch/ppc/platforms/4xx/xparameters/xparameters.h
+++ b/arch/ppc/platforms/4xx/xparameters/xparameters.h
@@ -1,7 +1,8 @@
/*
* include/asm-ppc/xparameters.h
*
- * This file includes the correct xparameters.h for the CONFIG'ed board
+ * This file includes the correct xparameters.h for the CONFIG'ed board plus
+ * fixups to translate board specific XPAR values to a common set of names
*
* Author: MontaVista Software, Inc.
* source@mvista.com
@@ -14,5 +15,21 @@
#include <linux/config.h>
#if defined(CONFIG_XILINX_ML300)
-#include <platforms/4xx/xparameters/xparameters_ml300.h>
+ #include "xparameters_ml300.h"
+#else
+ /* Add other board xparameter includes here before the #else */
+ #error No xparameters_*.h file included
+#endif
+
+#ifndef SERIAL_PORT_DFNS
+ /* zImage serial port definitions */
+ #define RS_TABLE_SIZE 1
+ #define SERIAL_PORT_DFNS { \
+ .baud_base = XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16, \
+ .irq = XPAR_INTC_0_UARTNS550_0_VEC_ID, \
+ .flags = ASYNC_BOOT_AUTOCONF, \
+ .iomem_base = (u8 *)XPAR_UARTNS550_0_BASEADDR + 3, \
+ .iomem_reg_shift = 2, \
+ .io_type = SERIAL_IO_MEM, \
+ },
#endif
diff --git a/include/asm-ppc/ppc_sys.h b/include/asm-ppc/ppc_sys.h
index 83d8c77c124d..bdc4dde35edd 100644
--- a/include/asm-ppc/ppc_sys.h
+++ b/include/asm-ppc/ppc_sys.h
@@ -33,6 +33,8 @@
#include <asm/mpc52xx.h>
#elif defined(CONFIG_MPC10X_BRIDGE)
#include <asm/mpc10x.h>
+#elif defined(CONFIG_XILINX_VIRTEX)
+#include <platforms/4xx/virtex.h>
#else
#error "need definition of ppc_sys_devices"
#endif