Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Maintain the TCP retransmit queue using an rbtree, with 1GB
      windows at 100Gb this really has become necessary. From Eric
      Dumazet.

   2) Multi-program support for cgroup+bpf, from Alexei Starovoitov.

   3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew
      Lunn.

   4) Add meter action support to openvswitch, from Andy Zhou.

   5) Add a data meta pointer for BPF accessible packets, from Daniel
      Borkmann.

   6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet.

   7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli.

   8) More work to move the RTNL mutex down, from Florian Westphal.

   9) Add 'bpftool' utility, to help with bpf program introspection.
      From Jakub Kicinski.

  10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper
      Dangaard Brouer.

  11) Support 'blocks' of transformations in the packet scheduler which
      can span multiple network devices, from Jiri Pirko.

  12) TC flower offload support in cxgb4, from Kumar Sanghvi.

  13) Priority based stream scheduler for SCTP, from Marcelo Ricardo
      Leitner.

  14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg.

  15) Add RED qdisc offloadability, and use it in mlxsw driver. From
      Nogah Frankel.

  16) eBPF based device controller for cgroup v2, from Roman Gushchin.

  17) Add some fundamental tracepoints for TCP, from Song Liu.

  18) Remove garbage collection from ipv6 route layer, this is a
      significant accomplishment. From Wei Wang.

  19) Add multicast route offload support to mlxsw, from Yotam Gigi"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits)
  tcp: highest_sack fix
  geneve: fix fill_info when link down
  bpf: fix lockdep splat
  net: cdc_ncm: GetNtbFormat endian fix
  openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start
  netem: remove unnecessary 64 bit modulus
  netem: use 64 bit divide by rate
  tcp: Namespace-ify sysctl_tcp_default_congestion_control
  net: Protect iterations over net::fib_notifier_ops in fib_seq_sum()
  ipv6: set all.accept_dad to 0 by default
  uapi: fix linux/tls.h userspace compilation error
  usbnet: ipheth: prevent TX queue timeouts when device not ready
  vhost_net: conditionally enable tx polling
  uapi: fix linux/rxrpc.h userspace compilation errors
  net: stmmac: fix LPI transitioning for dwmac4
  atm: horizon: Fix irq release error
  net-sysfs: trigger netlink notification on ifalias change via sysfs
  openvswitch: Using kfree_rcu() to simplify the code
  openvswitch: Make local function ovs_nsh_key_attr_size() static
  openvswitch: Fix return value check in ovs_meter_cmd_features()
  ...

66 files changed, 9779 insertions, 1355 deletions

diff --git a/tools/Makefile b/tools/Makefile
index c4f41ef9a7a7..c03b4f69d5b7 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -20,7 +20,7 @@ help:
 	@echo '  kvm_stat               - top-like utility for displaying kvm statistics'
 	@echo '  leds                   - LEDs  tools'
 	@echo '  liblockdep             - user-space wrapper for kernel locking-validator'
-	@echo '  net                    - misc networking tools'
+	@echo '  bpf                    - misc BPF tools'
 	@echo '  perf                   - Linux performance measurement and analysis tool'
 	@echo '  selftests              - various kernel selftests'
 	@echo '  spi                    - spi tools'
@@ -58,7 +58,7 @@ acpi: FORCE
 cpupower: FORCE
 	$(call descend,power/$@)
 
-cgroup firewire hv guest spi usb virtio vm net iio gpio objtool leds: FORCE
+cgroup firewire hv guest spi usb virtio vm bpf iio gpio objtool leds: FORCE
 	$(call descend,$@)
 
 liblockdep: FORCE
@@ -92,7 +92,7 @@ kvm_stat: FORCE
 
 all: acpi cgroup cpupower gpio hv firewire liblockdep \
 		perf selftests spi turbostat usb \
-		virtio vm net x86_energy_perf_policy \
+		virtio vm bpf x86_energy_perf_policy \
 		tmon freefall iio objtool kvm_stat
 
 acpi_install:
@@ -101,7 +101,7 @@ acpi_install:
 cpupower_install:
 	$(call descend,power/$(@:_install=),install)
 
-cgroup_install firewire_install gpio_install hv_install iio_install perf_install spi_install usb_install virtio_install vm_install net_install objtool_install:
+cgroup_install firewire_install gpio_install hv_install iio_install perf_install spi_install usb_install virtio_install vm_install bpf_install objtool_install:
 	$(call descend,$(@:_install=),install)
 
 liblockdep_install:
@@ -125,7 +125,7 @@ kvm_stat_install:
 install: acpi_install cgroup_install cpupower_install gpio_install \
 		hv_install firewire_install iio_install liblockdep_install \
 		perf_install selftests_install turbostat_install usb_install \
-		virtio_install vm_install net_install x86_energy_perf_policy_install \
+		virtio_install vm_install bpf_install x86_energy_perf_policy_install \
 		tmon_install freefall_install objtool_install kvm_stat_install
 
 acpi_clean:
@@ -134,7 +134,7 @@ acpi_clean:
 cpupower_clean:
 	$(call descend,power/cpupower,clean)
 
-cgroup_clean hv_clean firewire_clean spi_clean usb_clean virtio_clean vm_clean net_clean iio_clean gpio_clean objtool_clean leds_clean:
+cgroup_clean hv_clean firewire_clean spi_clean usb_clean virtio_clean vm_clean bpf_clean iio_clean gpio_clean objtool_clean leds_clean:
 	$(call descend,$(@:_clean=),clean)
 
 liblockdep_clean:
@@ -170,7 +170,7 @@ build_clean:
 
 clean: acpi_clean cgroup_clean cpupower_clean hv_clean firewire_clean \
 		perf_clean selftests_clean turbostat_clean spi_clean usb_clean virtio_clean \
-		vm_clean net_clean iio_clean x86_energy_perf_policy_clean tmon_clean \
+		vm_clean bpf_clean iio_clean x86_energy_perf_policy_clean tmon_clean \
 		freefall_clean build_clean libbpf_clean libsubcmd_clean liblockdep_clean \
 		gpio_clean objtool_clean leds_clean
 
diff --git a/tools/net/Makefile b/tools/bpf/Makefile
index 5830670feae1..07a6697466ef 100644
--- a/tools/net/Makefile
+++ b/tools/bpf/Makefile
@@ -4,6 +4,7 @@ prefix = /usr
 CC = gcc
 LEX = flex
 YACC = bison
+MAKE = make
 
 CFLAGS += -Wall -O2
 CFLAGS += -D__EXPORTED_HEADERS__ -I../../include/uapi -I../../include
@@ -14,7 +15,7 @@ CFLAGS += -D__EXPORTED_HEADERS__ -I../../include/uapi -I../../include
 %.lex.c: %.l
 	$(LEX) -o $@ $<
 
-all : bpf_jit_disasm bpf_dbg bpf_asm
+all: bpf_jit_disasm bpf_dbg bpf_asm bpftool
 
 bpf_jit_disasm : CFLAGS += -DPACKAGE='bpf_jit_disasm'
 bpf_jit_disasm : LDLIBS = -lopcodes -lbfd -ldl
@@ -27,10 +28,21 @@ bpf_asm : LDLIBS =
 bpf_asm : bpf_asm.o bpf_exp.yacc.o bpf_exp.lex.o
 bpf_exp.lex.o : bpf_exp.yacc.c
 
-clean :
+clean: bpftool_clean
 	rm -rf *.o bpf_jit_disasm bpf_dbg bpf_asm bpf_exp.yacc.* bpf_exp.lex.*
 
-install :
+install: bpftool_install
 	install bpf_jit_disasm $(prefix)/bin/bpf_jit_disasm
 	install bpf_dbg $(prefix)/bin/bpf_dbg
 	install bpf_asm $(prefix)/bin/bpf_asm
+
+bpftool:
+	$(MAKE) -C bpftool
+
+bpftool_install:
+	$(MAKE) -C bpftool install
+
+bpftool_clean:
+	$(MAKE) -C bpftool clean
+
+.PHONY: bpftool FORCE
diff --git a/tools/net/bpf_asm.c b/tools/bpf/bpf_asm.c
index c15aef097b04..c15aef097b04 100644
--- a/tools/net/bpf_asm.c
+++ b/tools/bpf/bpf_asm.c
diff --git a/tools/net/bpf_dbg.c b/tools/bpf/bpf_dbg.c
index 4f254bcc4423..4f254bcc4423 100644
--- a/tools/net/bpf_dbg.c
+++ b/tools/bpf/bpf_dbg.c
diff --git a/tools/net/bpf_exp.l b/tools/bpf/bpf_exp.l
index bd83149e7be0..bd83149e7be0 100644
--- a/tools/net/bpf_exp.l
+++ b/tools/bpf/bpf_exp.l
diff --git a/tools/net/bpf_exp.y b/tools/bpf/bpf_exp.y
index 56ba1de50784..56ba1de50784 100644
--- a/tools/net/bpf_exp.y
+++ b/tools/bpf/bpf_exp.y
diff --git a/tools/net/bpf_jit_disasm.c b/tools/bpf/bpf_jit_disasm.c
index 422d9abd666a..75bf526a0168 100644
--- a/tools/net/bpf_jit_disasm.c
+++ b/tools/bpf/bpf_jit_disasm.c
@@ -27,6 +27,7 @@
 #include <sys/klog.h>
 #include <sys/types.h>
 #include <sys/stat.h>
+#include <limits.h>
 
 #define CMD_ACTION_SIZE_BUFFER		10
 #define CMD_ACTION_READ_ALL		3
@@ -51,7 +52,7 @@ static void get_exec_path(char *tpath, size_t size)
 static void get_asm_insns(uint8_t *image, size_t len, int opcodes)
 {
 	int count, i, pc = 0;
-	char tpath[256];
+	char tpath[PATH_MAX];
 	struct disassemble_info info;
 	disassembler_ftype disassemble;
 	bfd *bfdf;
diff --git a/tools/bpf/bpftool/Documentation/Makefile b/tools/bpf/bpftool/Documentation/Makefile
new file mode 100644
index 000000000000..bde77d7c4390
--- /dev/null
+++ b/tools/bpf/bpftool/Documentation/Makefile
@@ -0,0 +1,34 @@
+include ../../../scripts/Makefile.include
+include ../../../scripts/utilities.mak
+
+INSTALL ?= install
+RM ?= rm -f
+
+# Make the path relative to DESTDIR, not prefix
+ifndef DESTDIR
+prefix?=$(HOME)
+endif
+mandir ?= $(prefix)/share/man
+man8dir = $(mandir)/man8
+
+MAN8_RST = $(wildcard *.rst)
+
+_DOC_MAN8 = $(patsubst %.rst,%.8,$(MAN8_RST))
+DOC_MAN8 = $(addprefix $(OUTPUT),$(_DOC_MAN8))
+
+man: man8
+man8: $(DOC_MAN8)
+
+$(OUTPUT)%.8: %.rst
+	rst2man $< > $@
+
+clean:
+	$(call QUIET_CLEAN, Documentation) $(RM) $(DOC_MAN8)
+
+install: man
+	$(call QUIET_INSTALL, Documentation-man) \
+		$(INSTALL) -d -m 755 $(DESTDIR)$(man8dir); \
+		$(INSTALL) -m 644 $(DOC_MAN8) $(DESTDIR)$(man8dir);
+
+.PHONY: man man8 clean install
+.DEFAULT_GOAL := man
diff --git a/tools/bpf/bpftool/Documentation/bpftool-map.rst b/tools/bpf/bpftool/Documentation/bpftool-map.rst
new file mode 100644
index 000000000000..9f51a268eb06
--- /dev/null
+++ b/tools/bpf/bpftool/Documentation/bpftool-map.rst
@@ -0,0 +1,131 @@
+================
+bpftool-map
+================
+-------------------------------------------------------------------------------
+tool for inspection and simple manipulation of eBPF maps
+-------------------------------------------------------------------------------
+
+:Manual section: 8
+
+SYNOPSIS
+========
+
+	**bpftool** [*OPTIONS*] **map** *COMMAND*
+
+	*OPTIONS* := { { **-j** | **--json** } [{ **-p** | **--pretty** }] | { **-f** | **--bpffs** } }
+
+	*COMMANDS* :=
+	{ **show** | **dump** | **update** | **lookup** | **getnext** | **delete**
+	| **pin** | **help** }
+
+MAP COMMANDS
+=============
+
+|	**bpftool** **map show**   [*MAP*]
+|	**bpftool** **map dump**    *MAP*
+|	**bpftool** **map update**  *MAP*  **key** *BYTES*   **value** *VALUE* [*UPDATE_FLAGS*]
+|	**bpftool** **map lookup**  *MAP*  **key** *BYTES*
+|	**bpftool** **map getnext** *MAP* [**key** *BYTES*]
+|	**bpftool** **map delete**  *MAP*  **key** *BYTES*
+|	**bpftool** **map pin**     *MAP*  *FILE*
+|	**bpftool** **map help**
+|
+|	*MAP* := { **id** *MAP_ID* | **pinned** *FILE* }
+|	*VALUE* := { *BYTES* | *MAP* | *PROGRAM* }
+|	*UPDATE_FLAGS* := { **any** | **exist** | **noexist** }
+
+DESCRIPTION
+===========
+	**bpftool map show**   [*MAP*]
+		  Show information about loaded maps.  If *MAP* is specified
+		  show information only about given map, otherwise list all
+		  maps currently loaded on the system.
+
+		  Output will start with map ID followed by map type and
+		  zero or more named attributes (depending on kernel version).
+
+	**bpftool map dump**    *MAP*
+		  Dump all entries in a given *MAP*.
+
+	**bpftool map update**  *MAP*  **key** *BYTES*   **value** *VALUE* [*UPDATE_FLAGS*]
+		  Update map entry for a given *KEY*.
+
+		  *UPDATE_FLAGS* can be one of: **any** update existing entry
+		  or add if doesn't exit; **exist** update only if entry already
+		  exists; **noexist** update only if entry doesn't exist.
+
+	**bpftool map lookup**  *MAP*  **key** *BYTES*
+		  Lookup **key** in the map.
+
+	**bpftool map getnext** *MAP* [**key** *BYTES*]
+		  Get next key.  If *key* is not specified, get first key.
+
+	**bpftool map delete**  *MAP*  **key** *BYTES*
+		  Remove entry from the map.
+
+	**bpftool map pin**     *MAP*  *FILE*
+		  Pin map *MAP* as *FILE*.
+
+		  Note: *FILE* must be located in *bpffs* mount.
+
+	**bpftool map help**
+		  Print short help message.
+
+OPTIONS
+=======
+	-h, --help
+		  Print short generic help message (similar to **bpftool help**).
+
+	-v, --version
+		  Print version number (similar to **bpftool version**).
+
+	-j, --json
+		  Generate JSON output. For commands that cannot produce JSON, this
+		  option has no effect.
+
+	-p, --pretty
+		  Generate human-readable JSON output. Implies **-j**.
+
+	-f, --bpffs
+		  Show file names of pinned maps.
+
+EXAMPLES
+========
+**# bpftool map show**
+::
+
+  10: hash  name some_map  flags 0x0
+	key 4B  value 8B  max_entries 2048  memlock 167936B
+
+**# bpftool map update id 10 key 13 00 07 00 value 02 00 00 00 01 02 03 04**
+
+**# bpftool map lookup id 10 key 0 1 2 3**
+
+::
+
+  key: 00 01 02 03 value: 00 01 02 03 04 05 06 07
+
+
+**# bpftool map dump id 10**
+::
+
+  key: 00 01 02 03  value: 00 01 02 03 04 05 06 07
+  key: 0d 00 07 00  value: 02 00 00 00 01 02 03 04
+  Found 2 elements
+
+**# bpftool map getnext id 10 key 0 1 2 3**
+::
+
+  key:
+  00 01 02 03
+  next key:
+  0d 00 07 00
+
+|
+| **# mount -t bpf none /sys/fs/bpf/**
+| **# bpftool map pin id 10 /sys/fs/bpf/map**
+| **# bpftool map del pinned /sys/fs/bpf/map key 13 00 07 00**
+
+SEE ALSO
+========
+	**bpftool**\ (8), **bpftool-prog**\ (8)
diff --git a/tools/bpf/bpftool/Documentation/bpftool-prog.rst b/tools/bpf/bpftool/Documentation/bpftool-prog.rst
new file mode 100644
index 000000000000..36e8d1c3c40d
--- /dev/null
+++ b/tools/bpf/bpftool/Documentation/bpftool-prog.rst
@@ -0,0 +1,150 @@
+================
+bpftool-prog
+================
+-------------------------------------------------------------------------------
+tool for inspection and simple manipulation of eBPF progs
+-------------------------------------------------------------------------------
+
+:Manual section: 8
+
+SYNOPSIS
+========
+
+	**bpftool** [*OPTIONS*] **prog** *COMMAND*
+
+	*OPTIONS* := { { **-j** | **--json** } [{ **-p** | **--pretty** }] | { **-f** | **--bpffs** } }
+
+	*COMMANDS* :=
+	{ **show** | **dump xlated** | **dump jited** | **pin** | **help** }
+
+MAP COMMANDS
+=============
+
+|	**bpftool** **prog show** [*PROG*]
+|	**bpftool** **prog dump xlated** *PROG* [{**file** *FILE* | **opcodes**}]
+|	**bpftool** **prog dump jited**  *PROG* [{**file** *FILE* | **opcodes**}]
+|	**bpftool** **prog pin** *PROG* *FILE*
+|	**bpftool** **prog help**
+|
+|	*PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* }
+
+DESCRIPTION
+===========
+	**bpftool prog show** [*PROG*]
+		  Show information about loaded programs.  If *PROG* is
+		  specified show information only about given program, otherwise
+		  list all programs currently loaded on the system.
+
+		  Output will start with program ID followed by program type and
+		  zero or more named attributes (depending on kernel version).
+
+	**bpftool prog dump xlated** *PROG* [{ **file** *FILE* | **opcodes** }]
+		  Dump eBPF instructions of the program from the kernel.
+		  If *FILE* is specified image will be written to a file,
+		  otherwise it will be disassembled and printed to stdout.
+
+		  **opcodes** controls if raw opcodes will be printed.
+
+	**bpftool prog dump jited**  *PROG* [{ **file** *FILE* | **opcodes** }]
+		  Dump jited image (host machine code) of the program.
+		  If *FILE* is specified image will be written to a file,
+		  otherwise it will be disassembled and printed to stdout.
+
+		  **opcodes** controls if raw opcodes will be printed.
+
+	**bpftool prog pin** *PROG* *FILE*
+		  Pin program *PROG* as *FILE*.
+
+		  Note: *FILE* must be located in *bpffs* mount.
+
+	**bpftool prog help**
+		  Print short help message.
+
+OPTIONS
+=======
+	-h, --help
+		  Print short generic help message (similar to **bpftool help**).
+
+	-v, --version
+		  Print version number (similar to **bpftool version**).
+
+	-j, --json
+		  Generate JSON output. For commands that cannot produce JSON, this
+		  option has no effect.
+
+	-p, --pretty
+		  Generate human-readable JSON output. Implies **-j**.
+
+	-f, --bpffs
+		  Show file names of pinned programs.
+
+EXAMPLES
+========
+**# bpftool prog show**
+::
+
+  10: xdp  name some_prog  tag 005a3d2123620c8b
+	loaded_at Sep 29/20:11  uid 0
+	xlated 528B  jited 370B  memlock 4096B  map_ids 10
+
+**# bpftool --json --pretty prog show**
+
+::
+
+    {
+        "programs": [{
+                "id": 10,
+                "type": "xdp",
+                "tag": "005a3d2123620c8b",
+                "loaded_at": "Sep 29/20:11",
+                "uid": 0,
+                "bytes_xlated": 528,
+                "jited": true,
+                "bytes_jited": 370,
+                "bytes_memlock": 4096,
+                "map_ids": [10
+                ]
+            }
+        ]
+    }
+
+|
+| **# bpftool prog dump xlated id 10 file /tmp/t**
+| **# ls -l /tmp/t**
+|   -rw------- 1 root root 560 Jul 22 01:42 /tmp/t
+
+**# bpftool prog dum jited tag 005a3d2123620c8b**
+
+::
+
+    push   %rbp
+    mov    %rsp,%rbp
+    sub    $0x228,%rsp
+    sub    $0x28,%rbp
+    mov    %rbx,0x0(%rbp)
+
+|
+| **# mount -t bpf none /sys/fs/bpf/**
+| **# bpftool prog pin id 10 /sys/fs/bpf/prog**
+| **# ls -l /sys/fs/bpf/**
+|   -rw------- 1 root root 0 Jul 22 01:43 prog
+
+**# bpftool prog dum jited pinned /sys/fs/bpf/prog opcodes**
+
+::
+
+    push   %rbp
+    55
+    mov    %rsp,%rbp
+    48 89 e5
+    sub    $0x228,%rsp
+    48 81 ec 28 02 00 00
+    sub    $0x28,%rbp
+    48 83 ed 28
+    mov    %rbx,0x0(%rbp)
+    48 89 5d 00
+
+
+SEE ALSO
+========
+	**bpftool**\ (8), **bpftool-map**\ (8)
diff --git a/tools/bpf/bpftool/Documentation/bpftool.rst b/tools/bpf/bpftool/Documentation/bpftool.rst
new file mode 100644
index 000000000000..926c03d5a8da
--- /dev/null
+++ b/tools/bpf/bpftool/Documentation/bpftool.rst
@@ -0,0 +1,56 @@
+================
+BPFTOOL
+================
+-------------------------------------------------------------------------------
+tool for inspection and simple manipulation of eBPF programs and maps
+-------------------------------------------------------------------------------
+
+:Manual section: 8
+
+SYNOPSIS
+========
+
+	**bpftool** [*OPTIONS*] *OBJECT* { *COMMAND* | **help** }
+
+	**bpftool** **batch file** *FILE*
+
+	**bpftool** **version**
+
+	*OBJECT* := { **map** | **program** }
+
+	*OPTIONS* := { { **-V** | **--version** } | { **-h** | **--help** }
+	| { **-j** | **--json** } [{ **-p** | **--pretty** }] }
+
+	*MAP-COMMANDS* :=
+	{ **show** | **dump** | **update** | **lookup** | **getnext** | **delete**
+	| **pin** | **help** }
+
+	*PROG-COMMANDS* := { **show** | **dump jited** | **dump xlated** | **pin**
+	| **help** }
+
+DESCRIPTION
+===========
+	*bpftool* allows for inspection and simple modification of BPF objects
+	on the system.
+
+	Note that format of the output of all tools is not guaranteed to be
+	stable and should not be depended upon.
+
+OPTIONS
+=======
+	-h, --help
+		  Print short help message (similar to **bpftool help**).
+
+	-v, --version
+		  Print version number (similar to **bpftool version**).
+
+	-j, --json
+		  Generate JSON output. For commands that cannot produce JSON, this
+		  option has no effect.
+
+	-p, --pretty
+		  Generate human-readable JSON output. Implies **-j**.
+
+SEE ALSO
+========
+	**bpftool-map**\ (8), **bpftool-prog**\ (8)
diff --git a/tools/bpf/bpftool/Makefile b/tools/bpf/bpftool/Makefile
new file mode 100644
index 000000000000..813826c50936
--- /dev/null
+++ b/tools/bpf/bpftool/Makefile
@@ -0,0 +1,92 @@
+include ../../scripts/Makefile.include
+
+include ../../scripts/utilities.mak
+
+ifeq ($(srctree),)
+srctree := $(patsubst %/,%,$(dir $(CURDIR)))
+srctree := $(patsubst %/,%,$(dir $(srctree)))
+srctree := $(patsubst %/,%,$(dir $(srctree)))
+#$(info Determined 'srctree' to be $(srctree))
+endif
+
+ifneq ($(objtree),)
+#$(info Determined 'objtree' to be $(objtree))
+endif
+
+ifneq ($(OUTPUT),)
+#$(info Determined 'OUTPUT' to be $(OUTPUT))
+# Adding $(OUTPUT) as a directory to look for source files,
+# because use generated output files as sources dependency
+# for flex/bison parsers.
+VPATH += $(OUTPUT)
+export VPATH
+endif
+
+ifeq ($(V),1)
+  Q =
+else
+  Q = @
+endif
+
+BPF_DIR	= $(srctree)/tools/lib/bpf/
+
+ifneq ($(OUTPUT),)
+  BPF_PATH=$(OUTPUT)
+else
+  BPF_PATH=$(BPF_DIR)
+endif
+
+LIBBPF = $(BPF_PATH)libbpf.a
+
+$(LIBBPF): FORCE
+	$(Q)$(MAKE) -C $(BPF_DIR) OUTPUT=$(OUTPUT) $(OUTPUT)libbpf.a FEATURES_DUMP=$(FEATURE_DUMP_EXPORT)
+
+$(LIBBPF)-clean:
+	$(call QUIET_CLEAN, libbpf)
+	$(Q)$(MAKE) -C $(BPF_DIR) OUTPUT=$(OUTPUT) clean >/dev/null
+
+prefix = /usr
+bash_compdir ?= $(prefix)/share/bash-completion/completions
+
+CC = gcc
+
+CFLAGS += -O2
+CFLAGS += -W -Wall -Wextra -Wno-unused-parameter -Wshadow
+CFLAGS += -D__EXPORTED_HEADERS__ -I$(srctree)/tools/include/uapi -I$(srctree)/tools/include -I$(srctree)/tools/lib/bpf -I$(srctree)/kernel/bpf/
+LIBS = -lelf -lbfd -lopcodes $(LIBBPF)
+
+include $(wildcard *.d)
+
+all: $(OUTPUT)bpftool
+
+SRCS=$(wildcard *.c)
+OBJS=$(patsubst %.c,$(OUTPUT)%.o,$(SRCS)) $(OUTPUT)disasm.o
+
+$(OUTPUT)disasm.o: $(srctree)/kernel/bpf/disasm.c
+	$(QUIET_CC)$(COMPILE.c) -MMD -o $@ $<
+
+$(OUTPUT)bpftool: $(OBJS) $(LIBBPF)
+	$(QUIET_LINK)$(CC) $(CFLAGS) -o $@ $^ $(LIBS)
+
+$(OUTPUT)%.o: %.c
+	$(QUIET_CC)$(COMPILE.c) -MMD -o $@ $<
+
+clean: $(LIBBPF)-clean
+	$(call QUIET_CLEAN, bpftool)
+	$(Q)rm -rf $(OUTPUT)bpftool $(OUTPUT)*.o $(OUTPUT)*.d
+
+install:
+	install $(OUTPUT)bpftool $(prefix)/sbin/bpftool
+	install -m 0755 -d $(bash_compdir)
+	install -m 0644 bash-completion/bpftool $(bash_compdir)
+
+doc:
+	$(Q)$(MAKE) -C Documentation/
+
+doc-install:
+	$(Q)$(MAKE) -C Documentation/ install
+
+FORCE:
+
+.PHONY: all clean FORCE
+.DEFAULT_GOAL := all
diff --git a/tools/bpf/bpftool/bash-completion/bpftool b/tools/bpf/bpftool/bash-completion/bpftool
new file mode 100644
index 000000000000..7febee05c8e7
--- /dev/null
+++ b/tools/bpf/bpftool/bash-completion/bpftool
@@ -0,0 +1,354 @@
+# bpftool(8) bash completion                               -*- shell-script -*-
+#
+# Copyright (C) 2017 Netronome Systems, Inc.
+#
+# This software is dual licensed under the GNU General License
+# Version 2, June 1991 as shown in the file COPYING in the top-level
+# directory of this source tree or the BSD 2-Clause License provided
+# below.  You have the option to license this software under the
+# complete terms of either license.
+#
+# The BSD 2-Clause License:
+#
+#     Redistribution and use in source and binary forms, with or
+#     without modification, are permitted provided that the following
+#     conditions are met:
+#
+#      1. Redistributions of source code must retain the above
+#         copyright notice, this list of conditions and the following
+#         disclaimer.
+#
+#      2. Redistributions in binary form must reproduce the above
+#         copyright notice, this list of conditions and the following
+#         disclaimer in the documentation and/or other materials
+#         provided with the distribution.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+# BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+# ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+# SOFTWARE.
+#
+# Author: Quentin Monnet <quentin.monnet@netronome.com>
+
+# Takes a list of words in argument; each one of them is added to COMPREPLY if
+# it is not already present on the command line. Returns no value.
+_bpftool_once_attr()
+{
+    local w idx found
+    for w in $*; do
+        found=0
+        for (( idx=3; idx < ${#words[@]}-1; idx++ )); do
+            if [[ $w == ${words[idx]} ]]; then
+                found=1
+                break
+            fi
+        done
+        [[ $found -eq 0 ]] && \
+            COMPREPLY+=( $( compgen -W "$w" -- "$cur" ) )
+    done
+}
+
+# Takes a list of words in argument; adds them all to COMPREPLY if none of them
+# is already present on the command line. Returns no value.
+_bpftool_one_of_list()
+{
+    local w idx
+    for w in $*; do
+        for (( idx=3; idx < ${#words[@]}-1; idx++ )); do
+            [[ $w == ${words[idx]} ]] && return 1
+        done
+    done
+    COMPREPLY+=( $( compgen -W "$*" -- "$cur" ) )
+}
+
+_bpftool_get_map_ids()
+{
+    COMPREPLY+=( $( compgen -W "$( bpftool -jp map  2>&1 | \
+        command sed -n 's/.*"id": \(.*\),$/\1/p' )" -- "$cur" ) )
+}
+
+_bpftool_get_prog_ids()
+{
+    COMPREPLY+=( $( compgen -W "$( bpftool -jp prog 2>&1 | \
+        command sed -n 's/.*"id": \(.*\),$/\1/p' )" -- "$cur" ) )
+}
+
+_bpftool_get_prog_tags()
+{
+    COMPREPLY+=( $( compgen -W "$( bpftool -jp prog 2>&1 | \
+        command sed -n 's/.*"tag": "\(.*\)",$/\1/p' )" -- "$cur" ) )
+}
+
+# For bpftool map update: retrieve type of the map to update.
+_bpftool_map_update_map_type()
+{
+    local keyword ref
+    for (( idx=3; idx < ${#words[@]}-1; idx++ )); do
+        if [[ ${words[$((idx-2))]} == "update" ]]; then
+            keyword=${words[$((idx-1))]}
+            ref=${words[$((idx))]}
+        fi
+    done
+    [[ -z $ref ]] && return 0
+
+    local type
+    type=$(bpftool -jp map show $keyword $ref | \
+        command sed -n 's/.*"type": "\(.*\)",$/\1/p')
+    printf $type
+}
+
+_bpftool_map_update_get_id()
+{
+    # Is it the map to update, or a map to insert into the map to update?
+    # Search for "value" keyword.
+    local idx value
+    for (( idx=7; idx < ${#words[@]}-1; idx++ )); do
+        if [[ ${words[idx]} == "value" ]]; then
+            value=1
+            break
+        fi
+    done
+    [[ $value -eq 0 ]] && _bpftool_get_map_ids && return 0
+
+    # Id to complete is for a value. It can be either prog id or map id. This
+    # depends on the type of the map to update.
+    local type=$(_bpftool_map_update_map_type)
+    case $type in
+        array_of_maps|hash_of_maps)
+            _bpftool_get_map_ids
+            return 0
+            ;;
+        prog_array)
+            _bpftool_get_prog_ids
+            return 0
+            ;;
+        *)
+            return 0
+            ;;
+    esac
+}
+
+_bpftool()
+{
+    local cur prev words objword
+    _init_completion || return
+
+    # Deal with simplest keywords
+    case $prev in
+        help|key|opcodes)
+            return 0
+            ;;
+        tag)
+            _bpftool_get_prog_tags
+            return 0
+            ;;
+        file|pinned)
+            _filedir
+            return 0
+            ;;
+        batch)
+            COMPREPLY=( $( compgen -W 'file' -- "$cur" ) )
+            return 0
+            ;;
+    esac
+
+    # Search for object and command
+    local object command cmdword
+    for (( cmdword=1; cmdword < ${#words[@]}-1; cmdword++ )); do
+        [[ -n $object ]] && command=${words[cmdword]} && break
+        [[ ${words[cmdword]} != -* ]] && object=${words[cmdword]}
+    done
+
+    if [[ -z $object ]]; then
+        case $cur in
+            -*)
+                local c='--version --json --pretty'
+                COMPREPLY=( $( compgen -W "$c" -- "$cur" ) )
+                return 0
+                ;;
+            *)
+                COMPREPLY=( $( compgen -W "$( bpftool help 2>&1 | \
+                    command sed \
+                    -e '/OBJECT := /!d' \
+                    -e 's/.*{//' \
+                    -e 's/}.*//' \
+                    -e 's/|//g' )" -- "$cur" ) )
+                COMPREPLY+=( $( compgen -W 'batch help' -- "$cur" ) )
+                return 0
+                ;;
+        esac
+    fi
+
+    [[ $command == help ]] && return 0
+
+    # Completion depends on object and command in use
+    case $object in
+        prog)
+            case $prev in
+                id)
+                    _bpftool_get_prog_ids
+                    return 0
+                    ;;
+            esac
+
+            local PROG_TYPE='id pinned tag'
+            case $command in
+                show)
+                    [[ $prev != "$command" ]] && return 0
+                    COMPREPLY=( $( compgen -W "$PROG_TYPE" -- "$cur" ) )
+                    return 0
+                    ;;
+                dump)
+                    case $prev in
+                        $command)
+                            COMPREPLY+=( $( compgen -W "xlated jited" -- \
+                                "$cur" ) )
+                            return 0
+                            ;;
+                        xlated|jited)
+                            COMPREPLY=( $( compgen -W "$PROG_TYPE" -- \
+                                "$cur" ) )
+                            return 0
+                            ;;
+                    *)
+                            _bpftool_once_attr 'file'
+                            COMPREPLY+=( $( compgen -W 'opcodes' -- \
+                                "$cur" ) )
+                            return 0
+                            ;;
+                    esac
+                    ;;
+                pin)
+                    if [[ $prev == "$command" ]]; then
+                        COMPREPLY=( $( compgen -W "$PROG_TYPE" -- "$cur" ) )
+                    else
+                        _filedir
+                    fi
+                    return 0
+                    ;;
+                *)
+                    [[ $prev == $object ]] && \
+                        COMPREPLY=( $( compgen -W 'dump help pin show' -- \
+                            "$cur" ) )
+                    ;;
+            esac
+            ;;
+        map)
+            local MAP_TYPE='id pinned'
+            case $command in
+                show|dump)
+                    case $prev in
+                        $command)
+                            COMPREPLY=( $( compgen -W "$MAP_TYPE" -- "$cur" ) )
+                            return 0
+                            ;;
+                        id)
+                            _bpftool_get_map_ids
+                            return 0
+                            ;;
+                        *)
+                            return 0
+                            ;;
+                    esac
+                    ;;
+                lookup|getnext|delete)
+                    case $prev in
+                        $command)
+                            COMPREPLY=( $( compgen -W "$MAP_TYPE" -- "$cur" ) )
+                            return 0
+                            ;;
+                        id)
+                            _bpftool_get_map_ids
+                            return 0
+                            ;;
+                        key)
+                            return 0
+                            ;;
+                        *)
+                            _bpftool_once_attr 'key'
+                            return 0
+                            ;;
+                    esac
+                    ;;
+                update)
+                    case $prev in
+                        $command)
+                            COMPREPLY=( $( compgen -W "$MAP_TYPE" -- "$cur" ) )
+                            return 0
+                            ;;
+                        id)
+                            _bpftool_map_update_get_id
+                            return 0
+                            ;;
+                        key)
+                            return 0
+                            ;;
+                        value)
+                            # We can have bytes, or references to a prog or a
+                            # map, depending on the type of the map to update.
+                            case $(_bpftool_map_update_map_type) in
+                                array_of_maps|hash_of_maps)
+                                    local MAP_TYPE='id pinned'
+                                    COMPREPLY+=( $( compgen -W "$MAP_TYPE" \
+                                        -- "$cur" ) )
+                                    return 0
+                                    ;;
+                                prog_array)
+                                    local PROG_TYPE='id pinned tag'
+                                    COMPREPLY+=( $( compgen -W "$PROG_TYPE" \
+                                        -- "$cur" ) )
+                                    return 0
+                                    ;;
+                                *)
+                                    return 0
+                                    ;;
+                            esac
+                            return 0
+                            ;;
+                        *)
+                            _bpftool_once_attr 'key'
+                            local UPDATE_FLAGS='any exist noexist'
+                            for (( idx=3; idx < ${#words[@]}-1; idx++ )); do
+                                if [[ ${words[idx]} == 'value' ]]; then
+                                    # 'value' is present, but is not the last
+                                    # word i.e. we can now have UPDATE_FLAGS.
+                                    _bpftool_one_of_list "$UPDATE_FLAGS"
+                                    return 0
+                                fi
+                            done
+                            for (( idx=3; idx < ${#words[@]}-1; idx++ )); do
+                                if [[ ${words[idx]} == 'key' ]]; then
+                                    # 'key' is present, but is not the last
+                                    # word i.e. we can now have 'value'.
+                                    _bpftool_once_attr 'value'
+                                    return 0
+                                fi
+                            done
+                            return 0
+                            ;;
+                    esac
+                    ;;
+                pin)
+                    if [[ $prev == "$command" ]]; then
+                        COMPREPLY=( $( compgen -W "$PROG_TYPE" -- "$cur" ) )
+                    else
+                        _filedir
+                    fi
+                    return 0
+                    ;;
+                *)
+                    [[ $prev == $object ]] && \
+                        COMPREPLY=( $( compgen -W 'delete dump getnext help \
+                            lookup pin show update' -- "$cur" ) )
+                    ;;
+            esac
+            ;;
+    esac
+} &&
+complete -F _bpftool bpftool
+
+# ex: ts=4 sw=4 et filetype=sh
diff --git a/tools/bpf/bpftool/common.c b/tools/bpf/bpftool/common.c
new file mode 100644
index 000000000000..2bd3b280e6dd
--- /dev/null
+++ b/tools/bpf/bpftool/common.c
@@ -0,0 +1,405 @@
+/*
+ * Copyright (C) 2017 Netronome Systems, Inc.
+ *
+ * This software is dual licensed under the GNU General License Version 2,
+ * June 1991 as shown in the file COPYING in the top-level directory of this
+ * source tree or the BSD 2-Clause License provided below.  You have the
+ * option to license this software under the complete terms of either license.
+ *
+ * The BSD 2-Clause License:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      1. Redistributions of source code must retain the above
+ *         copyright notice, this list of conditions and the following
+ *         disclaimer.
+ *
+ *      2. Redistributions in binary form must reproduce the above
+ *         copyright notice, this list of conditions and the following
+ *         disclaimer in the documentation and/or other materials
+ *         provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/* Author: Jakub Kicinski <kubakici@wp.pl> */
+
+#include <errno.h>
+#include <fts.h>
+#include <libgen.h>
+#include <mntent.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <linux/limits.h>
+#include <linux/magic.h>
+#include <sys/mount.h>
+#include <sys/types.h>
+#include <sys/vfs.h>
+
+#include <bpf.h>
+
+#include "main.h"
+
+void p_err(const char *fmt, ...)
+{
+	va_list ap;
+
+	va_start(ap, fmt);
+	if (json_output) {
+		jsonw_start_object(json_wtr);
+		jsonw_name(json_wtr, "error");
+		jsonw_vprintf_enquote(json_wtr, fmt, ap);
+		jsonw_end_object(json_wtr);
+	} else {
+		fprintf(stderr, "Error: ");
+		vfprintf(stderr, fmt, ap);
+		fprintf(stderr, "\n");
+	}
+	va_end(ap);
+}
+
+void p_info(const char *fmt, ...)
+{
+	va_list ap;
+
+	if (json_output)
+		return;
+
+	va_start(ap, fmt);
+	vfprintf(stderr, fmt, ap);
+	fprintf(stderr, "\n");
+	va_end(ap);
+}
+
+static bool is_bpffs(char *path)
+{
+	struct statfs st_fs;
+
+	if (statfs(path, &st_fs) < 0)
+		return false;
+
+	return (unsigned long)st_fs.f_type == BPF_FS_MAGIC;
+}
+
+static int mnt_bpffs(const char *target, char *buff, size_t bufflen)
+{
+	bool bind_done = false;
+
+	while (mount("", target, "none", MS_PRIVATE | MS_REC, NULL)) {
+		if (errno != EINVAL || bind_done) {
+			snprintf(buff, bufflen,
+				 "mount --make-private %s failed: %s",
+				 target, strerror(errno));
+			return -1;
+		}
+
+		if (mount(target, target, "none", MS_BIND, NULL)) {
+			snprintf(buff, bufflen,
+				 "mount --bind %s %s failed: %s",
+				 target, target, strerror(errno));
+			return -1;
+		}
+
+		bind_done = true;
+	}
+
+	if (mount("bpf", target, "bpf", 0, "mode=0700")) {
+		snprintf(buff, bufflen, "mount -t bpf bpf %s failed: %s",
+			 target, strerror(errno));
+		return -1;
+	}
+
+	return 0;
+}
+
+int open_obj_pinned(char *path)
+{
+	int fd;
+
+	fd = bpf_obj_get(path);
+	if (fd < 0) {
+		p_err("bpf obj get (%s): %s", path,
+		      errno == EACCES && !is_bpffs(dirname(path)) ?
+		    "directory not in bpf file system (bpffs)" :
+		    strerror(errno));
+		return -1;
+	}
+
+	return fd;
+}
+
+int open_obj_pinned_any(char *path, enum bpf_obj_type exp_type)
+{
+	enum bpf_obj_type type;
+	int fd;
+
+	fd = open_obj_pinned(path);
+	if (fd < 0)
+		return -1;
+
+	type = get_fd_type(fd);
+	if (type < 0) {
+		close(fd);
+		return type;
+	}
+	if (type != exp_type) {
+		p_err("incorrect object type: %s", get_fd_type_name(type));
+		close(fd);
+		return -1;
+	}
+
+	return fd;
+}
+
+int do_pin_any(int argc, char **argv, int (*get_fd_by_id)(__u32))
+{
+	char err_str[ERR_MAX_LEN];
+	unsigned int id;
+	char *endptr;
+	char *file;
+	char *dir;
+	int err;
+	int fd;
+
+	if (!is_prefix(*argv, "id")) {
+		p_err("expected 'id' got %s", *argv);
+		return -1;
+	}
+	NEXT_ARG();
+
+	id = strtoul(*argv, &endptr, 0);
+	if (*endptr) {
+		p_err("can't parse %s as ID", *argv);
+		return -1;
+	}
+	NEXT_ARG();
+
+	if (argc != 1)
+		usage();
+
+	fd = get_fd_by_id(id);
+	if (fd < 0) {
+		p_err("can't get prog by id (%u): %s", id, strerror(errno));
+		return -1;
+	}
+
+	err = bpf_obj_pin(fd, *argv);
+	if (!err)
+		goto out_close;
+
+	file = malloc(strlen(*argv) + 1);
+	strcpy(file, *argv);
+	dir = dirname(file);
+
+	if (errno != EPERM || is_bpffs(dir)) {
+		p_err("can't pin the object (%s): %s", *argv, strerror(errno));
+		goto out_free;
+	}
+
+	/* Attempt to mount bpffs, then retry pinning. */
+	err = mnt_bpffs(dir, err_str, ERR_MAX_LEN);
+	if (!err) {
+		err = bpf_obj_pin(fd, *argv);
+		if (err)
+			p_err("can't pin the object (%s): %s", *argv,
+			      strerror(errno));
+	} else {
+		err_str[ERR_MAX_LEN - 1] = '\0';
+		p_err("can't mount BPF file system to pin the object (%s): %s",
+		      *argv, err_str);
+	}
+
+out_free:
+	free(file);
+out_close:
+	close(fd);
+	return err;
+}
+
+const char *get_fd_type_name(enum bpf_obj_type type)
+{
+	static const char * const names[] = {
+		[BPF_OBJ_UNKNOWN]	= "unknown",
+		[BPF_OBJ_PROG]		= "prog",
+		[BPF_OBJ_MAP]		= "map",
+	};
+
+	if (type < 0 || type >= ARRAY_SIZE(names) || !names[type])
+		return names[BPF_OBJ_UNKNOWN];
+
+	return names[type];
+}
+
+int get_fd_type(int fd)
+{
+	char path[PATH_MAX];
+	char buf[512];
+	ssize_t n;
+
+	snprintf(path, sizeof(path), "/proc/%d/fd/%d", getpid(), fd);
+
+	n = readlink(path, buf, sizeof(buf));
+	if (n < 0) {
+		p_err("can't read link type: %s", strerror(errno));
+		return -1;
+	}
+	if (n == sizeof(path)) {
+		p_err("can't read link type: path too long!");
+		return -1;
+	}
+
+	if (strstr(buf, "bpf-map"))
+		return BPF_OBJ_MAP;
+	else if (strstr(buf, "bpf-prog"))
+		return BPF_OBJ_PROG;
+
+	return BPF_OBJ_UNKNOWN;
+}
+
+char *get_fdinfo(int fd, const char *key)
+{
+	char path[PATH_MAX];
+	char *line = NULL;
+	size_t line_n = 0;
+	ssize_t n;
+	FILE *fdi;
+
+	snprintf(path, sizeof(path), "/proc/%d/fdinfo/%d", getpid(), fd);
+
+	fdi = fopen(path, "r");
+	if (!fdi) {
+		p_err("can't open fdinfo: %s", strerror(errno));
+		return NULL;
+	}
+
+	while ((n = getline(&line, &line_n, fdi))) {
+		char *value;
+		int len;
+
+		if (!strstr(line, key))
+			continue;
+
+		fclose(fdi);
+
+		value = strchr(line, '\t');
+		if (!value || !value[1]) {
+			p_err("malformed fdinfo!?");
+			free(line);
+			return NULL;
+		}
+		value++;
+
+		len = strlen(value);
+		memmove(line, value, len);
+		line[len - 1] = '\0';
+
+		return line;
+	}
+
+	p_err("key '%s' not found in fdinfo", key);
+	free(line);
+	fclose(fdi);
+	return NULL;
+}
+
+void print_hex_data_json(uint8_t *data, size_t len)
+{
+	unsigned int i;
+
+	jsonw_start_array(json_wtr);
+	for (i = 0; i < len; i++)
+		jsonw_printf(json_wtr, "\"0x%02hhx\"", data[i]);
+	jsonw_end_array(json_wtr);
+}
+
+int build_pinned_obj_table(struct pinned_obj_table *tab,
+			   enum bpf_obj_type type)
+{
+	struct bpf_prog_info pinned_info = {};
+	struct pinned_obj *obj_node = NULL;
+	__u32 len = sizeof(pinned_info);
+	struct mntent *mntent = NULL;
+	enum bpf_obj_type objtype;
+	FILE *mntfile = NULL;
+	FTSENT *ftse = NULL;
+	FTS *fts = NULL;
+	int fd, err;
+
+	mntfile = setmntent("/proc/mounts", "r");
+	if (!mntfile)
+		return -1;
+
+	while ((mntent = getmntent(mntfile))) {
+		char *path[] = { mntent->mnt_dir, NULL };
+
+		if (strncmp(mntent->mnt_type, "bpf", 3) != 0)
+			continue;
+
+		fts = fts_open(path, 0, NULL);
+		if (!fts)
+			continue;
+
+		while ((ftse = fts_read(fts))) {
+			if (!(ftse->fts_info & FTS_F))
+				continue;
+			fd = open_obj_pinned(ftse->fts_path);
+			if (fd < 0)
+				continue;
+
+			objtype = get_fd_type(fd);
+			if (objtype != type) {
+				close(fd);
+				continue;
+			}
+			memset(&pinned_info, 0, sizeof(pinned_info));
+			err = bpf_obj_get_info_by_fd(fd, &pinned_info, &len);
+			if (err) {
+				close(fd);
+				continue;
+			}
+
+			obj_node = malloc(sizeof(*obj_node));
+			if (!obj_node) {
+				close(fd);
+				fts_close(fts);
+				fclose(mntfile);
+				return -1;
+			}
+
+			memset(obj_node, 0, sizeof(*obj_node));
+			obj_node->id = pinned_info.id;
+			obj_node->path = strdup(ftse->fts_path);
+			hash_add(tab->table, &obj_node->hash, obj_node->id);
+
+			close(fd);
+		}
+		fts_close(fts);
+	}
+	fclose(mntfile);
+	return 0;
+}
+
+void delete_pinned_obj_table(struct pinned_obj_table *tab)
+{
+	struct pinned_obj *obj;
+	struct hlist_node *tmp;
+	unsigned int bkt;
+
+	hash_for_each_safe(tab->table, bkt, tmp, obj, hash) {
+		hash_del(&obj->hash);
+		free(obj->path);
+		free(obj);
+	}
+}
diff --git a/tools/bpf/bpftool/jit_disasm.c b/tools/bpf/bpftool/jit_disasm.c
new file mode 100644
index 000000000000..1551d3918d4c
--- /dev/null
+++ b/tools/bpf/bpftool/jit_disasm.c
@@ -0,0 +1,162 @@
+/*
+ * Based on:
+ *
+ * Minimal BPF JIT image disassembler
+ *
+ * Disassembles BPF JIT compiler emitted opcodes back to asm insn's for
+ * debugging or verification purposes.
+ *
+ * Copyright 2013 Daniel Borkmann <daniel@iogearbox.net>
+ * Licensed under the GNU General Public License, version 2.0 (GPLv2)
+ */
+
+#include <stdarg.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <assert.h>
+#include <unistd.h>
+#include <string.h>
+#include <bfd.h>
+#include <dis-asm.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <limits.h>
+
+#include "json_writer.h"
+#include "main.h"
+
+static void get_exec_path(char *tpath, size_t size)
+{
+	ssize_t len;
+	char *path;
+
+	snprintf(tpath, size, "/proc/%d/exe", (int) getpid());
+	tpath[size - 1] = 0;
+
+	path = strdup(tpath);
+	assert(path);
+
+	len = readlink(path, tpath, size - 1);
+	assert(len > 0);
+	tpath[len] = 0;
+
+	free(path);
+}
+
+static int oper_count;
+static int fprintf_json(void *out, const char *fmt, ...)
+{
+	va_list ap;
+	char *s;
+
+	va_start(ap, fmt);
+	if (!oper_count) {
+		int i;
+
+		s = va_arg(ap, char *);
+
+		/* Strip trailing spaces */
+		i = strlen(s) - 1;
+		while (s[i] == ' ')
+			s[i--] = '\0';
+
+		jsonw_string_field(json_wtr, "operation", s);
+		jsonw_name(json_wtr, "operands");
+		jsonw_start_array(json_wtr);
+		oper_count++;
+	} else if (!strcmp(fmt, ",")) {
+		   /* Skip */
+	} else {
+		s = va_arg(ap, char *);
+		jsonw_string(json_wtr, s);
+		oper_count++;
+	}
+	va_end(ap);
+	return 0;
+}
+
+void disasm_print_insn(unsigned char *image, ssize_t len, int opcodes)
+{
+	disassembler_ftype disassemble;
+	struct disassemble_info info;
+	int count, i, pc = 0;
+	char tpath[PATH_MAX];
+	bfd *bfdf;
+
+	if (!len)
+		return;
+
+	memset(tpath, 0, sizeof(tpath));
+	get_exec_path(tpath, sizeof(tpath));
+
+	bfdf = bfd_openr(tpath, NULL);
+	assert(bfdf);
+	assert(bfd_check_format(bfdf, bfd_object));
+
+	if (json_output)
+		init_disassemble_info(&info, stdout,
+				      (fprintf_ftype) fprintf_json);
+	else
+		init_disassemble_info(&info, stdout,
+				      (fprintf_ftype) fprintf);
+	info.arch = bfd_get_arch(bfdf);
+	info.mach = bfd_get_mach(bfdf);
+	info.buffer = image;
+	info.buffer_length = len;
+
+	disassemble_init_for_target(&info);
+
+	disassemble = disassembler(bfdf);
+	assert(disassemble);
+
+	if (json_output)
+		jsonw_start_array(json_wtr);
+	do {
+		if (json_output) {
+			jsonw_start_object(json_wtr);
+			oper_count = 0;
+			jsonw_name(json_wtr, "pc");
+			jsonw_printf(json_wtr, "\"0x%x\"", pc);
+		} else {
+			printf("%4x:\t", pc);
+		}
+
+		count = disassemble(pc, &info);
+		if (json_output) {
+			/* Operand array, was started in fprintf_json. Before
+			 * that, make sure we have a _null_ value if no operand
+			 * other than operation code was present.
+			 */
+			if (oper_count == 1)
+				jsonw_null(json_wtr);
+			jsonw_end_array(json_wtr);
+		}
+
+		if (opcodes) {
+			if (json_output) {
+				jsonw_name(json_wtr, "opcodes");
+				jsonw_start_array(json_wtr);
+				for (i = 0; i < count; ++i)
+					jsonw_printf(json_wtr, "\"0x%02hhx\"",
+						     (uint8_t)image[pc + i]);
+				jsonw_end_array(json_wtr);
+			} else {
+				printf("\n\t");
+				for (i = 0; i < count; ++i)
+					printf("%02x ",
+					       (uint8_t)image[pc + i]);
+			}
+		}
+		if (json_output)
+			jsonw_end_object(json_wtr);
+		else
+			printf("\n");
+
+		pc += count;
+	} while (count > 0 && pc < len);
+	if (json_output)
+		jsonw_end_array(json_wtr);
+
+	bfd_close(bfdf);
+}
diff --git a/tools/bpf/bpftool/json_writer.c b/tools/bpf/bpftool/json_writer.c
new file mode 100644
index 000000000000..c6eef76322ae
--- /dev/null
+++ b/tools/bpf/bpftool/json_writer.c
@@ -0,0 +1,356 @@
+/*
+ * Simple streaming JSON writer
+ *
+ * This takes care of the annoying bits of JSON syntax like the commas
+ * after elements
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Authors:	Stephen Hemminger <stephen@networkplumber.org>
+ */
+
+#include <stdio.h>
+#include <stdbool.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <malloc.h>
+#include <inttypes.h>
+#include <stdint.h>
+
+#include "json_writer.h"
+
+struct json_writer {
+	FILE		*out;	/* output file */
+	unsigned	depth;  /* nesting */
+	bool		pretty; /* optional whitepace */
+	char		sep;	/* either nul or comma */
+};
+
+/* indentation for pretty print */
+static void jsonw_indent(json_writer_t *self)
+{
+	unsigned i;
+	for (i = 0; i < self->depth; ++i)
+		fputs("    ", self->out);
+}
+
+/* end current line and indent if pretty printing */
+static void jsonw_eol(json_writer_t *self)
+{
+	if (!self->pretty)
+		return;
+
+	putc('\n', self->out);
+	jsonw_indent(self);
+}
+
+/* If current object is not empty print a comma */
+static void jsonw_eor(json_writer_t *self)
+{
+	if (self->sep != '\0')
+		putc(self->sep, self->out);
+	self->sep = ',';
+}
+
+
+/* Output JSON encoded string */
+/* Handles C escapes, does not do Unicode */
+static void jsonw_puts(json_writer_t *self, const char *str)
+{
+	putc('"', self->out);
+	for (; *str; ++str)
+		switch (*str) {
+		case '\t':
+			fputs("\\t", self->out);
+			break;
+		case '\n':
+			fputs("\\n", self->out);
+			break;
+		case '\r':
+			fputs("\\r", self->out);
+			break;
+		case '\f':
+			fputs("\\f", self->out);
+			break;
+		case '\b':
+			fputs("\\b", self->out);
+			break;
+		case '\\':
+			fputs("\\n", self->out);
+			break;
+		case '"':
+			fputs("\\\"", self->out);
+			break;
+		case '\'':
+			fputs("\\\'", self->out);
+			break;
+		default:
+			putc(*str, self->out);
+		}
+	putc('"', self->out);
+}
+
+/* Create a new JSON stream */
+json_writer_t *jsonw_new(FILE *f)
+{
+	json_writer_t *self = malloc(sizeof(*self));
+	if (self) {
+		self->out = f;
+		self->depth = 0;
+		self->pretty = false;
+		self->sep = '\0';
+	}
+	return self;
+}
+
+/* End output to JSON stream */
+void jsonw_destroy(json_writer_t **self_p)
+{
+	json_writer_t *self = *self_p;
+
+	assert(self->depth == 0);
+	fputs("\n", self->out);
+	fflush(self->out);
+	free(self);
+	*self_p = NULL;
+}
+
+void jsonw_pretty(json_writer_t *self, bool on)
+{
+	self->pretty = on;
+}
+
+/* Basic blocks */
+static void jsonw_begin(json_writer_t *self, int c)
+{
+	jsonw_eor(self);
+	putc(c, self->out);
+	++self->depth;
+	self->sep = '\0';
+}
+
+static void jsonw_end(json_writer_t *self, int c)
+{
+	assert(self->depth > 0);
+
+	--self->depth;
+	if (self->sep != '\0')
+		jsonw_eol(self);
+	putc(c, self->out);
+	self->sep = ',';
+}
+
+
+/* Add a JSON property name */
+void jsonw_name(json_writer_t *self, const char *name)
+{
+	jsonw_eor(self);
+	jsonw_eol(self);
+	self->sep = '\0';
+	jsonw_puts(self, name);
+	putc(':', self->out);
+	if (self->pretty)
+		putc(' ', self->out);
+}
+
+void jsonw_vprintf_enquote(json_writer_t *self, const char *fmt, va_list ap)
+{
+	jsonw_eor(self);
+	putc('"', self->out);
+	vfprintf(self->out, fmt, ap);
+	putc('"', self->out);
+}
+
+void jsonw_printf(json_writer_t *self, const char *fmt, ...)
+{
+	va_list ap;
+
+	va_start(ap, fmt);
+	jsonw_eor(self);
+	vfprintf(self->out, fmt, ap);
+	va_end(ap);
+}
+
+/* Collections */
+void jsonw_start_object(json_writer_t *self)
+{
+	jsonw_begin(self, '{');
+}
+
+void jsonw_end_object(json_writer_t *self)
+{
+	jsonw_end(self, '}');
+}
+
+void jsonw_start_array(json_writer_t *self)
+{
+	jsonw_begin(self, '[');
+}
+
+void jsonw_end_array(json_writer_t *self)
+{
+	jsonw_end(self, ']');
+}
+
+/* JSON value types */
+void jsonw_string(json_writer_t *self, const char *value)
+{
+	jsonw_eor(self);
+	jsonw_puts(self, value);
+}
+
+void jsonw_bool(json_writer_t *self, bool val)
+{
+	jsonw_printf(self, "%s", val ? "true" : "false");
+}
+
+void jsonw_null(json_writer_t *self)
+{
+	jsonw_printf(self, "null");
+}
+
+void jsonw_float_fmt(json_writer_t *self, const char *fmt, double num)
+{
+	jsonw_printf(self, fmt, num);
+}
+
+#ifdef notused
+void jsonw_float(json_writer_t *self, double num)
+{
+	jsonw_printf(self, "%g", num);
+}
+#endif
+
+void jsonw_hu(json_writer_t *self, unsigned short num)
+{
+	jsonw_printf(self, "%hu", num);
+}
+
+void jsonw_uint(json_writer_t *self, uint64_t num)
+{
+	jsonw_printf(self, "%"PRIu64, num);
+}
+
+void jsonw_lluint(json_writer_t *self, unsigned long long int num)
+{
+	jsonw_printf(self, "%llu", num);
+}
+
+void jsonw_int(json_writer_t *self, int64_t num)
+{
+	jsonw_printf(self, "%"PRId64, num);
+}
+
+/* Basic name/value objects */
+void jsonw_string_field(json_writer_t *self, const char *prop, const char *val)
+{
+	jsonw_name(self, prop);
+	jsonw_string(self, val);
+}
+
+void jsonw_bool_field(json_writer_t *self, const char *prop, bool val)
+{
+	jsonw_name(self, prop);
+	jsonw_bool(self, val);
+}
+
+#ifdef notused
+void jsonw_float_field(json_writer_t *self, const char *prop, double val)
+{
+	jsonw_name(self, prop);
+	jsonw_float(self, val);
+}
+#endif
+
+void jsonw_float_field_fmt(json_writer_t *self,
+			   const char *prop,
+			   const char *fmt,
+			   double val)
+{
+	jsonw_name(self, prop);
+	jsonw_float_fmt(self, fmt, val);
+}
+
+void jsonw_uint_field(json_writer_t *self, const char *prop, uint64_t num)
+{
+	jsonw_name(self, prop);
+	jsonw_uint(self, num);
+}
+
+void jsonw_hu_field(json_writer_t *self, const char *prop, unsigned short num)
+{
+	jsonw_name(self, prop);
+	jsonw_hu(self, num);
+}
+
+void jsonw_lluint_field(json_writer_t *self,
+			const char *prop,
+			unsigned long long int num)
+{
+	jsonw_name(self, prop);
+	jsonw_lluint(self, num);
+}
+
+void jsonw_int_field(json_writer_t *self, const char *prop, int64_t num)
+{
+	jsonw_name(self, prop);
+	jsonw_int(self, num);
+}
+
+void jsonw_null_field(json_writer_t *self, const char *prop)
+{
+	jsonw_name(self, prop);
+	jsonw_null(self);
+}
+
+#ifdef TEST
+int main(int argc, char **argv)
+{
+	json_writer_t *wr = jsonw_new(stdout);
+
+	jsonw_start_object(wr);
+	jsonw_pretty(wr, true);
+	jsonw_name(wr, "Vyatta");
+	jsonw_start_object(wr);
+	jsonw_string_field(wr, "url", "http://vyatta.com");
+	jsonw_uint_field(wr, "downloads", 2000000ul);
+	jsonw_float_field(wr, "stock", 8.16);
+
+	jsonw_name(wr, "ARGV");
+	jsonw_start_array(wr);
+	while (--argc)
+		jsonw_string(wr, *++argv);
+	jsonw_end_array(wr);
+
+	jsonw_name(wr, "empty");
+	jsonw_start_array(wr);
+	jsonw_end_array(wr);
+
+	jsonw_name(wr, "NIL");
+	jsonw_start_object(wr);
+	jsonw_end_object(wr);
+
+	jsonw_null_field(wr, "my_null");
+
+	jsonw_name(wr, "special chars");
+	jsonw_start_array(wr);
+	jsonw_string_field(wr, "slash", "/");
+	jsonw_string_field(wr, "newline", "\n");
+	jsonw_string_field(wr, "tab", "\t");
+	jsonw_string_field(wr, "ff", "\f");
+	jsonw_string_field(wr, "quote", "\"");
+	jsonw_string_field(wr, "tick", "\'");
+	jsonw_string_field(wr, "backslash", "\\");
+	jsonw_end_array(wr);
+
+	jsonw_end_object(wr);
+
+	jsonw_end_object(wr);
+	jsonw_destroy(&wr);
+	return 0;
+}
+
+#endif
diff --git a/tools/bpf/bpftool/json_writer.h b/tools/bpf/bpftool/json_writer.h
new file mode 100644
index 000000000000..0fa2fb1b6351
--- /dev/null
+++ b/tools/bpf/bpftool/json_writer.h
@@ -0,0 +1,72 @@
+/*
+ * Simple streaming JSON writer
+ *
+ * This takes care of the annoying bits of JSON syntax like the commas
+ * after elements
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Authors:	Stephen Hemminger <stephen@networkplumber.org>
+ */
+
+#ifndef _JSON_WRITER_H_
+#define _JSON_WRITER_H_
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdarg.h>
+
+/* Opaque class structure */
+typedef struct json_writer json_writer_t;
+
+/* Create a new JSON stream */
+json_writer_t *jsonw_new(FILE *f);
+/* End output to JSON stream */
+void jsonw_destroy(json_writer_t **self_p);
+
+/* Cause output to have pretty whitespace */
+void jsonw_pretty(json_writer_t *self, bool on);
+
+/* Add property name */
+void jsonw_name(json_writer_t *self, const char *name);
+
+/* Add value  */
+void jsonw_vprintf_enquote(json_writer_t *self, const char *fmt, va_list ap);
+void jsonw_printf(json_writer_t *self, const char *fmt, ...);
+void jsonw_string(json_writer_t *self, const char *value);
+void jsonw_bool(json_writer_t *self, bool value);
+void jsonw_float(json_writer_t *self, double number);
+void jsonw_float_fmt(json_writer_t *self, const char *fmt, double num);
+void jsonw_uint(json_writer_t *self, uint64_t number);
+void jsonw_hu(json_writer_t *self, unsigned short number);
+void jsonw_int(json_writer_t *self, int64_t number);
+void jsonw_null(json_writer_t *self);
+void jsonw_lluint(json_writer_t *self, unsigned long long int num);
+
+/* Useful Combinations of name and value */
+void jsonw_string_field(json_writer_t *self, const char *prop, const char *val);
+void jsonw_bool_field(json_writer_t *self, const char *prop, bool value);
+void jsonw_float_field(json_writer_t *self, const char *prop, double num);
+void jsonw_uint_field(json_writer_t *self, const char *prop, uint64_t num);
+void jsonw_hu_field(json_writer_t *self, const char *prop, unsigned short num);
+void jsonw_int_field(json_writer_t *self, const char *prop, int64_t num);
+void jsonw_null_field(json_writer_t *self, const char *prop);
+void jsonw_lluint_field(json_writer_t *self, const char *prop,
+			unsigned long long int num);
+void jsonw_float_field_fmt(json_writer_t *self, const char *prop,
+			   const char *fmt, double val);
+
+/* Collections */
+void jsonw_start_object(json_writer_t *self);
+void jsonw_end_object(json_writer_t *self);
+
+void jsonw_start_array(json_writer_t *self);
+void jsonw_end_array(json_writer_t *self);
+
+/* Override default exception handling */
+typedef void (jsonw_err_handler_fn)(const char *);
+
+#endif /* _JSON_WRITER_H_ */
diff --git a/tools/bpf/bpftool/main.c b/tools/bpf/bpftool/main.c
new file mode 100644
index 000000000000..d6e4762170a4
--- /dev/null
+++ b/tools/bpf/bpftool/main.c
@@ -0,0 +1,331 @@
+/*
+ * Copyright (C) 2017 Netronome Systems, Inc.
+ *
+ * This software is dual licensed under the GNU General License Version 2,
+ * June 1991 as shown in the file COPYING in the top-level directory of this
+ * source tree or the BSD 2-Clause License provided below.  You have the
+ * option to license this software under the complete terms of either license.
+ *
+ * The BSD 2-Clause License:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      1. Redistributions of source code must retain the above
+ *         copyright notice, this list of conditions and the following
+ *         disclaimer.
+ *
+ *      2. Redistributions in binary form must reproduce the above
+ *         copyright notice, this list of conditions and the following
+ *         disclaimer in the documentation and/or other materials
+ *         provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/* Author: Jakub Kicinski <kubakici@wp.pl> */
+
+#include <bfd.h>
+#include <ctype.h>
+#include <errno.h>
+#include <getopt.h>
+#include <linux/bpf.h>
+#include <linux/version.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <bpf.h>
+
+#include "main.h"
+
+const char *bin_name;
+static int last_argc;
+static char **last_argv;
+static int (*last_do_help)(int argc, char **argv);
+json_writer_t *json_wtr;
+bool pretty_output;
+bool json_output;
+bool show_pinned;
+struct pinned_obj_table prog_table;
+struct pinned_obj_table map_table;
+
+void usage(void)
+{
+	last_do_help(last_argc - 1, last_argv + 1);
+
+	exit(-1);
+}
+
+static int do_help(int argc, char **argv)
+{
+	if (json_output) {
+		jsonw_null(json_wtr);
+		return 0;
+	}
+
+	fprintf(stderr,
+		"Usage: %s [OPTIONS] OBJECT { COMMAND | help }\n"
+		"       %s batch file FILE\n"
+		"       %s version\n"
+		"\n"
+		"       OBJECT := { prog | map }\n"
+		"       " HELP_SPEC_OPTIONS "\n"
+		"",
+		bin_name, bin_name, bin_name);
+
+	return 0;
+}
+
+static int do_version(int argc, char **argv)
+{
+	unsigned int version[3];
+
+	version[0] = LINUX_VERSION_CODE >> 16;
+	version[1] = LINUX_VERSION_CODE >> 8 & 0xf;
+	version[2] = LINUX_VERSION_CODE & 0xf;
+
+	if (json_output) {
+		jsonw_start_object(json_wtr);
+		jsonw_name(json_wtr, "version");
+		jsonw_printf(json_wtr, "\"%u.%u.%u\"",
+			     version[0], version[1], version[2]);
+		jsonw_end_object(json_wtr);
+	} else {
+		printf("%s v%u.%u.%u\n", bin_name,
+		       version[0], version[1], version[2]);
+	}
+	return 0;
+}
+
+int cmd_select(const struct cmd *cmds, int argc, char **argv,
+	       int (*help)(int argc, char **argv))
+{
+	unsigned int i;
+
+	last_argc = argc;
+	last_argv = argv;
+	last_do_help = help;
+
+	if (argc < 1 && cmds[0].func)
+		return cmds[0].func(argc, argv);
+
+	for (i = 0; cmds[i].func; i++)
+		if (is_prefix(*argv, cmds[i].cmd))
+			return cmds[i].func(argc - 1, argv + 1);
+
+	help(argc - 1, argv + 1);
+
+	return -1;
+}
+
+bool is_prefix(const char *pfx, const char *str)
+{
+	if (!pfx)
+		return false;
+	if (strlen(str) < strlen(pfx))
+		return false;
+
+	return !memcmp(str, pfx, strlen(pfx));
+}
+
+void fprint_hex(FILE *f, void *arg, unsigned int n, const char *sep)
+{
+	unsigned char *data = arg;
+	unsigned int i;
+
+	for (i = 0; i < n; i++) {
+		const char *pfx = "";
+
+		if (!i)
+			/* nothing */;
+		else if (!(i % 16))
+			fprintf(f, "\n");
+		else if (!(i % 8))
+			fprintf(f, "  ");
+		else
+			pfx = sep;
+
+		fprintf(f, "%s%02hhx", i ? pfx : "", data[i]);
+	}
+}
+
+static int do_batch(int argc, char **argv);
+
+static const struct cmd cmds[] = {
+	{ "help",	do_help },
+	{ "batch",	do_batch },
+	{ "prog",	do_prog },
+	{ "map",	do_map },
+	{ "version",	do_version },
+	{ 0 }
+};
+
+static int do_batch(int argc, char **argv)
+{
+	unsigned int lines = 0;
+	char *n_argv[4096];
+	char buf[65536];
+	int n_argc;
+	FILE *fp;
+	int err;
+	int i;
+
+	if (argc < 2) {
+		p_err("too few parameters for batch");
+		return -1;
+	} else if (!is_prefix(*argv, "file")) {
+		p_err("expected 'file', got: %s", *argv);
+		return -1;
+	} else if (argc > 2) {
+		p_err("too many parameters for batch");
+		return -1;
+	}
+	NEXT_ARG();
+
+	fp = fopen(*argv, "r");
+	if (!fp) {
+		p_err("Can't open file (%s): %s", *argv, strerror(errno));
+		return -1;
+	}
+
+	if (json_output)
+		jsonw_start_array(json_wtr);
+	while (fgets(buf, sizeof(buf), fp)) {
+		if (strlen(buf) == sizeof(buf) - 1) {
+			errno = E2BIG;
+			break;
+		}
+
+		n_argc = 0;
+		n_argv[n_argc] = strtok(buf, " \t\n");
+
+		while (n_argv[n_argc]) {
+			n_argc++;
+			if (n_argc == ARRAY_SIZE(n_argv)) {
+				p_err("line %d has too many arguments, skip",
+				      lines);
+				n_argc = 0;
+				break;
+			}
+			n_argv[n_argc] = strtok(NULL, " \t\n");
+		}
+
+		if (!n_argc)
+			continue;
+
+		if (json_output) {
+			jsonw_start_object(json_wtr);
+			jsonw_name(json_wtr, "command");
+			jsonw_start_array(json_wtr);
+			for (i = 0; i < n_argc; i++)
+				jsonw_string(json_wtr, n_argv[i]);
+			jsonw_end_array(json_wtr);
+			jsonw_name(json_wtr, "output");
+		}
+
+		err = cmd_select(cmds, n_argc, n_argv, do_help);
+
+		if (json_output)
+			jsonw_end_object(json_wtr);
+
+		if (err)
+			goto err_close;
+
+		lines++;
+	}
+
+	if (errno && errno != ENOENT) {
+		perror("reading batch file failed");
+		err = -1;
+	} else {
+		p_info("processed %d lines", lines);
+		err = 0;
+	}
+err_close:
+	fclose(fp);
+
+	if (json_output)
+		jsonw_end_array(json_wtr);
+
+	return err;
+}
+
+int main(int argc, char **argv)
+{
+	static const struct option options[] = {
+		{ "json",	no_argument,	NULL,	'j' },
+		{ "help",	no_argument,	NULL,	'h' },
+		{ "pretty",	no_argument,	NULL,	'p' },
+		{ "version",	no_argument,	NULL,	'V' },
+		{ "bpffs",	no_argument,	NULL,	'f' },
+		{ 0 }
+	};
+	int opt, ret;
+
+	last_do_help = do_help;
+	pretty_output = false;
+	json_output = false;
+	show_pinned = false;
+	bin_name = argv[0];
+
+	hash_init(prog_table.table);
+	hash_init(map_table.table);
+
+	while ((opt = getopt_long(argc, argv, "Vhpjf",
+				  options, NULL)) >= 0) {
+		switch (opt) {
+		case 'V':
+			return do_version(argc, argv);
+		case 'h':
+			return do_help(argc, argv);
+		case 'p':
+			pretty_output = true;
+			/* fall through */
+		case 'j':
+			json_output = true;
+			break;
+		case 'f':
+			show_pinned = true;
+			break;
+		default:
+			usage();
+		}
+	}
+
+	argc -= optind;
+	argv += optind;
+	if (argc < 0)
+		usage();
+
+	if (json_output) {
+		json_wtr = jsonw_new(stdout);
+		if (!json_wtr) {
+			p_err("failed to create JSON writer");
+			return -1;
+		}
+		jsonw_pretty(json_wtr, pretty_output);
+	}
+
+	bfd_init();
+
+	ret = cmd_select(cmds, argc, argv, do_help);
+
+	if (json_output)
+		jsonw_destroy(&json_wtr);
+
+	if (show_pinned) {
+		delete_pinned_obj_table(&prog_table);
+		delete_pinned_obj_table(&map_table);
+	}
+
+	return ret;
+}
diff --git a/tools/bpf/bpftool/main.h b/tools/bpf/bpftool/main.h
new file mode 100644
index 000000000000..9c191e222d6f
--- /dev/null
+++ b/tools/bpf/bpftool/main.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2017 Netronome Systems, Inc.
+ *
+ * This software is dual licensed under the GNU General License Version 2,
+ * June 1991 as shown in the file COPYING in the top-level directory of this
+ * source tree or the BSD 2-Clause License provided below.  You have the
+ * option to license this software under the complete terms of either license.
+ *
+ * The BSD 2-Clause License:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      1. Redistributions of source code must retain the above
+ *         copyright notice, this list of conditions and the following
+ *         disclaimer.
+ *
+ *      2. Redistributions in binary form must reproduce the above
+ *         copyright notice, this list of conditions and the following
+ *         disclaimer in the documentation and/or other materials
+ *         provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/* Author: Jakub Kicinski <kubakici@wp.pl> */
+
+#ifndef __BPF_TOOL_H
+#define __BPF_TOOL_H
+
+/* BFD and kernel.h both define GCC_VERSION, differently */
+#undef GCC_VERSION
+#include <stdbool.h>
+#include <stdio.h>
+#include <linux/bpf.h>
+#include <linux/kernel.h>
+#include <linux/hashtable.h>
+
+#include "json_writer.h"
+
+#define ptr_to_u64(ptr)	((__u64)(unsigned long)(ptr))
+
+#define NEXT_ARG()	({ argc--; argv++; if (argc < 0) usage(); })
+#define NEXT_ARGP()	({ (*argc)--; (*argv)++; if (*argc < 0) usage(); })
+#define BAD_ARG()	({ p_err("what is '%s'?\n", *argv); -1; })
+
+#define ERR_MAX_LEN	1024
+
+#define BPF_TAG_FMT	"%02hhx%02hhx%02hhx%02hhx%02hhx%02hhx%02hhx%02hhx"
+
+#define HELP_SPEC_PROGRAM						\
+	"PROG := { id PROG_ID | pinned FILE | tag PROG_TAG }"
+#define HELP_SPEC_OPTIONS						\
+	"OPTIONS := { {-j|--json} [{-p|--pretty}] | {-f|--bpffs} }"
+
+enum bpf_obj_type {
+	BPF_OBJ_UNKNOWN,
+	BPF_OBJ_PROG,
+	BPF_OBJ_MAP,
+};
+
+extern const char *bin_name;
+
+extern json_writer_t *json_wtr;
+extern bool json_output;
+extern bool show_pinned;
+extern struct pinned_obj_table prog_table;
+extern struct pinned_obj_table map_table;
+
+void p_err(const char *fmt, ...);
+void p_info(const char *fmt, ...);
+
+bool is_prefix(const char *pfx, const char *str);
+void fprint_hex(FILE *f, void *arg, unsigned int n, const char *sep);
+void usage(void) __attribute__((noreturn));
+
+struct pinned_obj_table {
+	DECLARE_HASHTABLE(table, 16);
+};
+
+struct pinned_obj {
+	__u32 id;
+	char *path;
+	struct hlist_node hash;
+};
+
+int build_pinned_obj_table(struct pinned_obj_table *table,
+			   enum bpf_obj_type type);
+void delete_pinned_obj_table(struct pinned_obj_table *tab);
+
+struct cmd {
+	const char *cmd;
+	int (*func)(int argc, char **argv);
+};
+
+int cmd_select(const struct cmd *cmds, int argc, char **argv,
+	       int (*help)(int argc, char **argv));
+
+int get_fd_type(int fd);
+const char *get_fd_type_name(enum bpf_obj_type type);
+char *get_fdinfo(int fd, const char *key);
+int open_obj_pinned(char *path);
+int open_obj_pinned_any(char *path, enum bpf_obj_type exp_type);
+int do_pin_any(int argc, char **argv, int (*get_fd_by_id)(__u32));
+
+int do_prog(int argc, char **arg);
+int do_map(int argc, char **arg);
+
+int prog_parse_fd(int *argc, char ***argv);
+
+void disasm_print_insn(unsigned char *image, ssize_t len, int opcodes);
+void print_hex_data_json(uint8_t *data, size_t len);
+
+#endif
diff --git a/tools/bpf/bpftool/map.c b/tools/bpf/bpftool/map.c
new file mode 100644
index 000000000000..e2450c8e88e6
--- /dev/null
+++ b/tools/bpf/bpftool/map.c
@@ -0,0 +1,899 @@
+/*
+ * Copyright (C) 2017 Netronome Systems, Inc.
+ *
+ * This software is dual licensed under the GNU General License Version 2,
+ * June 1991 as shown in the file COPYING in the top-level directory of this
+ * source tree or the BSD 2-Clause License provided below.  You have the
+ * option to license this software under the complete terms of either license.
+ *
+ * The BSD 2-Clause License:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      1. Redistributions of source code must retain the above
+ *         copyright notice, this list of conditions and the following
+ *         disclaimer.
+ *
+ *      2. Redistributions in binary form must reproduce the above
+ *         copyright notice, this list of conditions and the following
+ *         disclaimer in the documentation and/or other materials
+ *         provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/* Author: Jakub Kicinski <kubakici@wp.pl> */
+
+#include <assert.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#include <bpf.h>
+
+#include "main.h"
+
+static const char * const map_type_name[] = {
+	[BPF_MAP_TYPE_UNSPEC]		= "unspec",
+	[BPF_MAP_TYPE_HASH]		= "hash",
+	[BPF_MAP_TYPE_ARRAY]		= "array",
+	[BPF_MAP_TYPE_PROG_ARRAY]	= "prog_array",
+	[BPF_MAP_TYPE_PERF_EVENT_ARRAY]	= "perf_event_array",
+	[BPF_MAP_TYPE_PERCPU_HASH]	= "percpu_hash",
+	[BPF_MAP_TYPE_PERCPU_ARRAY]	= "percpu_array",
+	[BPF_MAP_TYPE_STACK_TRACE]	= "stack_trace",
+	[BPF_MAP_TYPE_CGROUP_ARRAY]	= "cgroup_array",
+	[BPF_MAP_TYPE_LRU_HASH]		= "lru_hash",
+	[BPF_MAP_TYPE_LRU_PERCPU_HASH]	= "lru_percpu_hash",
+	[BPF_MAP_TYPE_LPM_TRIE]		= "lpm_trie",
+	[BPF_MAP_TYPE_ARRAY_OF_MAPS]	= "array_of_maps",
+	[BPF_MAP_TYPE_HASH_OF_MAPS]	= "hash_of_maps",
+	[BPF_MAP_TYPE_DEVMAP]		= "devmap",
+	[BPF_MAP_TYPE_SOCKMAP]		= "sockmap",
+};
+
+static unsigned int get_possible_cpus(void)
+{
+	static unsigned int result;
+	char buf[128];
+	long int n;
+	char *ptr;
+	int fd;
+
+	if (result)
+		return result;
+
+	fd = open("/sys/devices/system/cpu/possible", O_RDONLY);
+	if (fd < 0) {
+		p_err("can't open sysfs possible cpus");
+		exit(-1);
+	}
+
+	n = read(fd, buf, sizeof(buf));
+	if (n < 2) {
+		p_err("can't read sysfs possible cpus");
+		exit(-1);
+	}
+	close(fd);
+
+	if (n == sizeof(buf)) {
+		p_err("read sysfs possible cpus overflow");
+		exit(-1);
+	}
+
+	ptr = buf;
+	n = 0;
+	while (*ptr && *ptr != '\n') {
+		unsigned int a, b;
+
+		if (sscanf(ptr, "%u-%u", &a, &b) == 2) {
+			n += b - a + 1;
+
+			ptr = strchr(ptr, '-') + 1;
+		} else if (sscanf(ptr, "%u", &a) == 1) {
+			n++;
+		} else {
+			assert(0);
+		}
+
+		while (isdigit(*ptr))
+			ptr++;
+		if (*ptr == ',')
+			ptr++;
+	}
+
+	result = n;
+
+	return result;
+}
+
+static bool map_is_per_cpu(__u32 type)
+{
+	return type == BPF_MAP_TYPE_PERCPU_HASH ||
+	       type == BPF_MAP_TYPE_PERCPU_ARRAY ||
+	       type == BPF_MAP_TYPE_LRU_PERCPU_HASH;
+}
+
+static bool map_is_map_of_maps(__u32 type)
+{
+	return type == BPF_MAP_TYPE_ARRAY_OF_MAPS ||
+	       type == BPF_MAP_TYPE_HASH_OF_MAPS;
+}
+
+static bool map_is_map_of_progs(__u32 type)
+{
+	return type == BPF_MAP_TYPE_PROG_ARRAY;
+}
+
+static void *alloc_value(struct bpf_map_info *info)
+{
+	if (map_is_per_cpu(info->type))
+		return malloc(info->value_size * get_possible_cpus());
+	else
+		return malloc(info->value_size);
+}
+
+static int map_parse_fd(int *argc, char ***argv)
+{
+	int fd;
+
+	if (is_prefix(**argv, "id")) {
+		unsigned int id;
+		char *endptr;
+
+		NEXT_ARGP();
+
+		id = strtoul(**argv, &endptr, 0);
+		if (*endptr) {
+			p_err("can't parse %s as ID", **argv);
+			return -1;
+		}
+		NEXT_ARGP();
+
+		fd = bpf_map_get_fd_by_id(id);
+		if (fd < 0)
+			p_err("get map by id (%u): %s", id, strerror(errno));
+		return fd;
+	} else if (is_prefix(**argv, "pinned")) {
+		char *path;
+
+		NEXT_ARGP();
+
+		path = **argv;
+		NEXT_ARGP();
+
+		return open_obj_pinned_any(path, BPF_OBJ_MAP);
+	}
+
+	p_err("expected 'id' or 'pinned', got: '%s'?", **argv);
+	return -1;
+}
+
+static int
+map_parse_fd_and_info(int *argc, char ***argv, void *info, __u32 *info_len)
+{
+	int err;
+	int fd;
+
+	fd = map_parse_fd(argc, argv);
+	if (fd < 0)
+		return -1;
+
+	err = bpf_obj_get_info_by_fd(fd, info, info_len);
+	if (err) {
+		p_err("can't get map info: %s", strerror(errno));
+		close(fd);
+		return err;
+	}
+
+	return fd;
+}
+
+static void print_entry_json(struct bpf_map_info *info, unsigned char *key,
+			     unsigned char *value)
+{
+	jsonw_start_object(json_wtr);
+
+	if (!map_is_per_cpu(info->type)) {
+		jsonw_name(json_wtr, "key");
+		print_hex_data_json(key, info->key_size);
+		jsonw_name(json_wtr, "value");
+		print_hex_data_json(value, info->value_size);
+	} else {
+		unsigned int i, n;
+
+		n = get_possible_cpus();
+
+		jsonw_name(json_wtr, "key");
+		print_hex_data_json(key, info->key_size);
+
+		jsonw_name(json_wtr, "values");
+		jsonw_start_array(json_wtr);
+		for (i = 0; i < n; i++) {
+			jsonw_start_object(json_wtr);
+
+			jsonw_int_field(json_wtr, "cpu", i);
+
+			jsonw_name(json_wtr, "value");
+			print_hex_data_json(value + i * info->value_size,
+					    info->value_size);
+
+			jsonw_end_object(json_wtr);
+		}
+		jsonw_end_array(json_wtr);
+	}
+
+	jsonw_end_object(json_wtr);
+}
+
+static void print_entry_plain(struct bpf_map_info *info, unsigned char *key,
+			      unsigned char *value)
+{
+	if (!map_is_per_cpu(info->type)) {
+		bool single_line, break_names;
+
+		break_names = info->key_size > 16 || info->value_size > 16;
+		single_line = info->key_size + info->value_size <= 24 &&
+			!break_names;
+
+		printf("key:%c", break_names ? '\n' : ' ');
+		fprint_hex(stdout, key, info->key_size, " ");
+
+		printf(single_line ? "  " : "\n");
+
+		printf("value:%c", break_names ? '\n' : ' ');
+		fprint_hex(stdout, value, info->value_size, " ");
+
+		printf("\n");
+	} else {
+		unsigned int i, n;
+
+		n = get_possible_cpus();
+
+		printf("key:\n");
+		fprint_hex(stdout, key, info->key_size, " ");
+		printf("\n");
+		for (i = 0; i < n; i++) {
+			printf("value (CPU %02d):%c",
+			       i, info->value_size > 16 ? '\n' : ' ');
+			fprint_hex(stdout, value + i * info->value_size,
+				   info->value_size, " ");
+			printf("\n");
+		}
+	}
+}
+
+static char **parse_bytes(char **argv, const char *name, unsigned char *val,
+			  unsigned int n)
+{
+	unsigned int i = 0;
+	char *endptr;
+
+	while (i < n && argv[i]) {
+		val[i] = strtoul(argv[i], &endptr, 0);
+		if (*endptr) {
+			p_err("error parsing byte: %s", argv[i]);
+			return NULL;
+		}
+		i++;
+	}
+
+	if (i != n) {
+		p_err("%s expected %d bytes got %d", name, n, i);
+		return NULL;
+	}
+
+	return argv + i;
+}
+
+static int parse_elem(char **argv, struct bpf_map_info *info,
+		      void *key, void *value, __u32 key_size, __u32 value_size,
+		      __u32 *flags, __u32 **value_fd)
+{
+	if (!*argv) {
+		if (!key && !value)
+			return 0;
+		p_err("did not find %s", key ? "key" : "value");
+		return -1;
+	}
+
+	if (is_prefix(*argv, "key")) {
+		if (!key) {
+			if (key_size)
+				p_err("duplicate key");
+			else
+				p_err("unnecessary key");
+			return -1;
+		}
+
+		argv = parse_bytes(argv + 1, "key", key, key_size);
+		if (!argv)
+			return -1;
+
+		return parse_elem(argv, info, NULL, value, key_size, value_size,
+				  flags, value_fd);
+	} else if (is_prefix(*argv, "value")) {
+		int fd;
+
+		if (!value) {
+			if (value_size)
+				p_err("duplicate value");
+			else
+				p_err("unnecessary value");
+			return -1;
+		}
+
+		argv++;
+
+		if (map_is_map_of_maps(info->type)) {
+			int argc = 2;
+
+			if (value_size != 4) {
+				p_err("value smaller than 4B for map in map?");
+				return -1;
+			}
+			if (!argv[0] || !argv[1]) {
+				p_err("not enough value arguments for map in map");
+				return -1;
+			}
+
+			fd = map_parse_fd(&argc, &argv);
+			if (fd < 0)
+				return -1;
+
+			*value_fd = value;
+			**value_fd = fd;
+		} else if (map_is_map_of_progs(info->type)) {
+			int argc = 2;
+
+			if (value_size != 4) {
+				p_err("value smaller than 4B for map of progs?");
+				return -1;
+			}
+			if (!argv[0] || !argv[1]) {
+				p_err("not enough value arguments for map of progs");
+				return -1;
+			}
+
+			fd = prog_parse_fd(&argc, &argv);
+			if (fd < 0)
+				return -1;
+
+			*value_fd = value;
+			**value_fd = fd;
+		} else {
+			argv = parse_bytes(argv, "value", value, value_size);
+			if (!argv)
+				return -1;
+		}
+
+		return parse_elem(argv, info, key, NULL, key_size, value_size,
+				  flags, NULL);
+	} else if (is_prefix(*argv, "any") || is_prefix(*argv, "noexist") ||
+		   is_prefix(*argv, "exist")) {
+		if (!flags) {
+			p_err("flags specified multiple times: %s", *argv);
+			return -1;
+		}
+
+		if (is_prefix(*argv, "any"))
+			*flags = BPF_ANY;
+		else if (is_prefix(*argv, "noexist"))
+			*flags = BPF_NOEXIST;
+		else if (is_prefix(*argv, "exist"))
+			*flags = BPF_EXIST;
+
+		return parse_elem(argv + 1, info, key, value, key_size,
+				  value_size, NULL, value_fd);
+	}
+
+	p_err("expected key or value, got: %s", *argv);
+	return -1;
+}
+
+static int show_map_close_json(int fd, struct bpf_map_info *info)
+{
+	char *memlock;
+
+	memlock = get_fdinfo(fd, "memlock");
+	close(fd);
+
+	jsonw_start_object(json_wtr);
+
+	jsonw_uint_field(json_wtr, "id", info->id);
+	if (info->type < ARRAY_SIZE(map_type_name))
+		jsonw_string_field(json_wtr, "type",
+				   map_type_name[info->type]);
+	else
+		jsonw_uint_field(json_wtr, "type", info->type);
+
+	if (*info->name)
+		jsonw_string_field(json_wtr, "name", info->name);
+
+	jsonw_name(json_wtr, "flags");
+	jsonw_printf(json_wtr, "%#x", info->map_flags);
+	jsonw_uint_field(json_wtr, "bytes_key", info->key_size);
+	jsonw_uint_field(json_wtr, "bytes_value", info->value_size);
+	jsonw_uint_field(json_wtr, "max_entries", info->max_entries);
+
+	if (memlock)
+		jsonw_int_field(json_wtr, "bytes_memlock", atoi(memlock));
+	free(memlock);
+
+	if (!hash_empty(map_table.table)) {
+		struct pinned_obj *obj;
+
+		jsonw_name(json_wtr, "pinned");
+		jsonw_start_array(json_wtr);
+		hash_for_each_possible(map_table.table, obj, hash, info->id) {
+			if (obj->id == info->id)
+				jsonw_string(json_wtr, obj->path);
+		}
+		jsonw_end_array(json_wtr);
+	}
+
+	jsonw_end_object(json_wtr);
+
+	return 0;
+}
+
+static int show_map_close_plain(int fd, struct bpf_map_info *info)
+{
+	char *memlock;
+
+	memlock = get_fdinfo(fd, "memlock");
+	close(fd);
+
+	printf("%u: ", info->id);
+	if (info->type < ARRAY_SIZE(map_type_name))
+		printf("%s  ", map_type_name[info->type]);
+	else
+		printf("type %u  ", info->type);
+
+	if (*info->name)
+		printf("name %s  ", info->name);
+
+	printf("flags 0x%x\n", info->map_flags);
+	printf("\tkey %uB  value %uB  max_entries %u",
+	       info->key_size, info->value_size, info->max_entries);
+
+	if (memlock)
+		printf("  memlock %sB", memlock);
+	free(memlock);
+
+	printf("\n");
+	if (!hash_empty(map_table.table)) {
+		struct pinned_obj *obj;
+
+		hash_for_each_possible(map_table.table, obj, hash, info->id) {
+			if (obj->id == info->id)
+				printf("\tpinned %s\n", obj->path);
+		}
+	}
+	return 0;
+}
+
+static int do_show(int argc, char **argv)
+{
+	struct bpf_map_info info = {};
+	__u32 len = sizeof(info);
+	__u32 id = 0;
+	int err;
+	int fd;
+
+	if (show_pinned)
+		build_pinned_obj_table(&map_table, BPF_OBJ_MAP);
+
+	if (argc == 2) {
+		fd = map_parse_fd_and_info(&argc, &argv, &info, &len);
+		if (fd < 0)
+			return -1;
+
+		if (json_output)
+			return show_map_close_json(fd, &info);
+		else
+			return show_map_close_plain(fd, &info);
+	}
+
+	if (argc)
+		return BAD_ARG();
+
+	if (json_output)
+		jsonw_start_array(json_wtr);
+	while (true) {
+		err = bpf_map_get_next_id(id, &id);
+		if (err) {
+			if (errno == ENOENT)
+				break;
+			p_err("can't get next map: %s%s", strerror(errno),
+			      errno == EINVAL ? " -- kernel too old?" : "");
+			return -1;
+		}
+
+		fd = bpf_map_get_fd_by_id(id);
+		if (fd < 0) {
+			p_err("can't get map by id (%u): %s",
+			      id, strerror(errno));
+			return -1;
+		}
+
+		err = bpf_obj_get_info_by_fd(fd, &info, &len);
+		if (err) {
+			p_err("can't get map info: %s", strerror(errno));
+			close(fd);
+			return -1;
+		}
+
+		if (json_output)
+			show_map_close_json(fd, &info);
+		else
+			show_map_close_plain(fd, &info);
+	}
+	if (json_output)
+		jsonw_end_array(json_wtr);
+
+	return errno == ENOENT ? 0 : -1;
+}
+
+static int do_dump(int argc, char **argv)
+{
+	void *key, *value, *prev_key;
+	unsigned int num_elems = 0;
+	struct bpf_map_info info = {};
+	__u32 len = sizeof(info);
+	int err;
+	int fd;
+
+	if (argc != 2)
+		usage();
+
+	fd = map_parse_fd_and_info(&argc, &argv, &info, &len);
+	if (fd < 0)
+		return -1;
+
+	if (map_is_map_of_maps(info.type) || map_is_map_of_progs(info.type)) {
+		p_err("Dumping maps of maps and program maps not supported");
+		close(fd);
+		return -1;
+	}
+
+	key = malloc(info.key_size);
+	value = alloc_value(&info);
+	if (!key || !value) {
+		p_err("mem alloc failed");
+		err = -1;
+		goto exit_free;
+	}
+
+	prev_key = NULL;
+	if (json_output)
+		jsonw_start_array(json_wtr);
+	while (true) {
+		err = bpf_map_get_next_key(fd, prev_key, key);
+		if (err) {
+			if (errno == ENOENT)
+				err = 0;
+			break;
+		}
+
+		if (!bpf_map_lookup_elem(fd, key, value)) {
+			if (json_output)
+				print_entry_json(&info, key, value);
+			else
+				print_entry_plain(&info, key, value);
+		} else {
+			if (json_output) {
+				jsonw_name(json_wtr, "key");
+				print_hex_data_json(key, info.key_size);
+				jsonw_name(json_wtr, "value");
+				jsonw_start_object(json_wtr);
+				jsonw_string_field(json_wtr, "error",
+						   "can't lookup element");
+				jsonw_end_object(json_wtr);
+			} else {
+				p_info("can't lookup element with key: ");
+				fprint_hex(stderr, key, info.key_size, " ");
+				fprintf(stderr, "\n");
+			}
+		}
+
+		prev_key = key;
+		num_elems++;
+	}
+
+	if (json_output)
+		jsonw_end_array(json_wtr);
+	else
+		printf("Found %u element%s\n", num_elems,
+		       num_elems != 1 ? "s" : "");
+
+exit_free:
+	free(key);
+	free(value);
+	close(fd);
+
+	return err;
+}
+
+static int do_update(int argc, char **argv)
+{
+	struct bpf_map_info info = {};
+	__u32 len = sizeof(info);
+	__u32 *value_fd = NULL;
+	__u32 flags = BPF_ANY;
+	void *key, *value;
+	int fd, err;
+
+	if (argc < 2)
+		usage();
+
+	fd = map_parse_fd_and_info(&argc, &argv, &info, &len);
+	if (fd < 0)
+		return -1;
+
+	key = malloc(info.key_size);
+	value = alloc_value(&info);
+	if (!key || !value) {
+		p_err("mem alloc failed");
+		err = -1;
+		goto exit_free;
+	}
+
+	err = parse_elem(argv, &info, key, value, info.key_size,
+			 info.value_size, &flags, &value_fd);
+	if (err)
+		goto exit_free;
+
+	err = bpf_map_update_elem(fd, key, value, flags);
+	if (err) {
+		p_err("update failed: %s", strerror(errno));
+		goto exit_free;
+	}
+
+exit_free:
+	if (value_fd)
+		close(*value_fd);
+	free(key);
+	free(value);
+	close(fd);
+
+	if (!err && json_output)
+		jsonw_null(json_wtr);
+	return err;
+}
+
+static int do_lookup(int argc, char **argv)
+{
+	struct bpf_map_info info = {};
+	__u32 len = sizeof(info);
+	void *key, *value;
+	int err;
+	int fd;
+
+	if (argc < 2)
+		usage();
+
+	fd = map_parse_fd_and_info(&argc, &argv, &info, &len);
+	if (fd < 0)
+		return -1;
+
+	key = malloc(info.key_size);
+	value = alloc_value(&info);
+	if (!key || !value) {
+		p_err("mem alloc failed");
+		err = -1;
+		goto exit_free;
+	}
+
+	err = parse_elem(argv, &info, key, NULL, info.key_size, 0, NULL, NULL);
+	if (err)
+		goto exit_free;
+
+	err = bpf_map_lookup_elem(fd, key, value);
+	if (!err) {
+		if (json_output)
+			print_entry_json(&info, key, value);
+		else
+			print_entry_plain(&info, key, value);
+	} else if (errno == ENOENT) {
+		if (json_output) {
+			jsonw_null(json_wtr);
+		} else {
+			printf("key:\n");
+			fprint_hex(stdout, key, info.key_size, " ");
+			printf("\n\nNot found\n");
+		}
+	} else {
+		p_err("lookup failed: %s", strerror(errno));
+	}
+
+exit_free:
+	free(key);
+	free(value);
+	close(fd);
+
+	return err;
+}
+
+static int do_getnext(int argc, char **argv)
+{
+	struct bpf_map_info info = {};
+	__u32 len = sizeof(info);
+	void *key, *nextkey;
+	int err;
+	int fd;
+
+	if (argc < 2)
+		usage();
+
+	fd = map_parse_fd_and_info(&argc, &argv, &info, &len);
+	if (fd < 0)
+		return -1;
+
+	key = malloc(info.key_size);
+	nextkey = malloc(info.key_size);
+	if (!key || !nextkey) {
+		p_err("mem alloc failed");
+		err = -1;
+		goto exit_free;
+	}
+
+	if (argc) {
+		err = parse_elem(argv, &info, key, NULL, info.key_size, 0,
+				 NULL, NULL);
+		if (err)
+			goto exit_free;
+	} else {
+		free(key);
+		key = NULL;
+	}
+
+	err = bpf_map_get_next_key(fd, key, nextkey);
+	if (err) {
+		p_err("can't get next key: %s", strerror(errno));
+		goto exit_free;
+	}
+
+	if (json_output) {
+		jsonw_start_object(json_wtr);
+		if (key) {
+			jsonw_name(json_wtr, "key");
+			print_hex_data_json(key, info.key_size);
+		} else {
+			jsonw_null_field(json_wtr, "key");
+		}
+		jsonw_name(json_wtr, "next_key");
+		print_hex_data_json(nextkey, info.key_size);
+		jsonw_end_object(json_wtr);
+	} else {
+		if (key) {
+			printf("key:\n");
+			fprint_hex(stdout, key, info.key_size, " ");
+			printf("\n");
+		} else {
+			printf("key: None\n");
+		}
+		printf("next key:\n");
+		fprint_hex(stdout, nextkey, info.key_size, " ");
+		printf("\n");
+	}
+
+exit_free:
+	free(nextkey);
+	free(key);
+	close(fd);
+
+	return err;
+}
+
+static int do_delete(int argc, char **argv)
+{
+	struct bpf_map_info info = {};
+	__u32 len = sizeof(info);
+	void *key;
+	int err;
+	int fd;
+
+	if (argc < 2)
+		usage();
+
+	fd = map_parse_fd_and_info(&argc, &argv, &info, &len);
+	if (fd < 0)
+		return -1;
+
+	key = malloc(info.key_size);
+	if (!key) {
+		p_err("mem alloc failed");
+		err = -1;
+		goto exit_free;
+	}
+
+	err = parse_elem(argv, &info, key, NULL, info.key_size, 0, NULL, NULL);
+	if (err)
+		goto exit_free;
+
+	err = bpf_map_delete_elem(fd, key);
+	if (err)
+		p_err("delete failed: %s", strerror(errno));
+
+exit_free:
+	free(key);
+	close(fd);
+
+	if (!err && json_output)
+		jsonw_null(json_wtr);
+	return err;
+}
+
+static int do_pin(int argc, char **argv)
+{
+	int err;
+
+	err = do_pin_any(argc, argv, bpf_map_get_fd_by_id);
+	if (!err && json_output)
+		jsonw_null(json_wtr);
+	return err;
+}
+
+static int do_help(int argc, char **argv)
+{
+	if (json_output) {
+		jsonw_null(json_wtr);
+		return 0;
+	}
+
+	fprintf(stderr,
+		"Usage: %s %s show   [MAP]\n"
+		"       %s %s dump    MAP\n"
+		"       %s %s update  MAP  key BYTES value VALUE [UPDATE_FLAGS]\n"
+		"       %s %s lookup  MAP  key BYTES\n"
+		"       %s %s getnext MAP [key BYTES]\n"
+		"       %s %s delete  MAP  key BYTES\n"
+		"       %s %s pin     MAP  FILE\n"
+		"       %s %s help\n"
+		"\n"
+		"       MAP := { id MAP_ID | pinned FILE }\n"
+		"       " HELP_SPEC_PROGRAM "\n"
+		"       VALUE := { BYTES | MAP | PROG }\n"
+		"       UPDATE_FLAGS := { any | exist | noexist }\n"
+		"       " HELP_SPEC_OPTIONS "\n"
+		"",
+		bin_name, argv[-2], bin_name, argv[-2], bin_name, argv[-2],
+		bin_name, argv[-2], bin_name, argv[-2], bin_name, argv[-2],
+		bin_name, argv[-2], bin_name, argv[-2]);
+
+	return 0;
+}
+
+static const struct cmd cmds[] = {
+	{ "show",	do_show },
+	{ "help",	do_help },
+	{ "dump",	do_dump },
+	{ "update",	do_update },
+	{ "lookup",	do_lookup },
+	{ "getnext",	do_getnext },
+	{ "delete",	do_delete },
+	{ "pin",	do_pin },
+	{ 0 }
+};
+
+int do_map(int argc, char **argv)
+{
+	return cmd_select(cmds, argc, argv, do_help);
+}
diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c
new file mode 100644
index 000000000000..f45c44ef9bec
--- /dev/null
+++ b/tools/bpf/bpftool/prog.c
@@ -0,0 +1,703 @@
+/*
+ * Copyright (C) 2017 Netronome Systems, Inc.
+ *
+ * This software is dual licensed under the GNU General License Version 2,
+ * June 1991 as shown in the file COPYING in the top-level directory of this
+ * source tree or the BSD 2-Clause License provided below.  You have the
+ * option to license this software under the complete terms of either license.
+ *
+ * The BSD 2-Clause License:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      1. Redistributions of source code must retain the above
+ *         copyright notice, this list of conditions and the following
+ *         disclaimer.
+ *
+ *      2. Redistributions in binary form must reproduce the above
+ *         copyright notice, this list of conditions and the following
+ *         disclaimer in the documentation and/or other materials
+ *         provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/* Author: Jakub Kicinski <kubakici@wp.pl> */
+
+#include <errno.h>
+#include <fcntl.h>
+#include <stdarg.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <unistd.h>
+#include <net/if.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#include <bpf.h>
+
+#include "main.h"
+#include "disasm.h"
+
+static const char * const prog_type_name[] = {
+	[BPF_PROG_TYPE_UNSPEC]		= "unspec",
+	[BPF_PROG_TYPE_SOCKET_FILTER]	= "socket_filter",
+	[BPF_PROG_TYPE_KPROBE]		= "kprobe",
+	[BPF_PROG_TYPE_SCHED_CLS]	= "sched_cls",
+	[BPF_PROG_TYPE_SCHED_ACT]	= "sched_act",
+	[BPF_PROG_TYPE_TRACEPOINT]	= "tracepoint",
+	[BPF_PROG_TYPE_XDP]		= "xdp",
+	[BPF_PROG_TYPE_PERF_EVENT]	= "perf_event",
+	[BPF_PROG_TYPE_CGROUP_SKB]	= "cgroup_skb",
+	[BPF_PROG_TYPE_CGROUP_SOCK]	= "cgroup_sock",
+	[BPF_PROG_TYPE_LWT_IN]		= "lwt_in",
+	[BPF_PROG_TYPE_LWT_OUT]		= "lwt_out",
+	[BPF_PROG_TYPE_LWT_XMIT]	= "lwt_xmit",
+	[BPF_PROG_TYPE_SOCK_OPS]	= "sock_ops",
+	[BPF_PROG_TYPE_SK_SKB]		= "sk_skb",
+};
+
+static void print_boot_time(__u64 nsecs, char *buf, unsigned int size)
+{
+	struct timespec real_time_ts, boot_time_ts;
+	time_t wallclock_secs;
+	struct tm load_tm;
+
+	buf[--size] = '\0';
+
+	if (clock_gettime(CLOCK_REALTIME, &real_time_ts) ||
+	    clock_gettime(CLOCK_BOOTTIME, &boot_time_ts)) {
+		perror("Can't read clocks");
+		snprintf(buf, size, "%llu", nsecs / 1000000000);
+		return;
+	}
+
+	wallclock_secs = (real_time_ts.tv_sec - boot_time_ts.tv_sec) +
+		nsecs / 1000000000;
+
+	if (!localtime_r(&wallclock_secs, &load_tm)) {
+		snprintf(buf, size, "%llu", nsecs / 1000000000);
+		return;
+	}
+
+	strftime(buf, size, "%b %d/%H:%M", &load_tm);
+}
+
+static int prog_fd_by_tag(unsigned char *tag)
+{
+	struct bpf_prog_info info = {};
+	__u32 len = sizeof(info);
+	unsigned int id = 0;
+	int err;
+	int fd;
+
+	while (true) {
+		err = bpf_prog_get_next_id(id, &id);
+		if (err) {
+			p_err("%s", strerror(errno));
+			return -1;
+		}
+
+		fd = bpf_prog_get_fd_by_id(id);
+		if (fd < 0) {
+			p_err("can't get prog by id (%u): %s",
+			      id, strerror(errno));
+			return -1;
+		}
+
+		err = bpf_obj_get_info_by_fd(fd, &info, &len);
+		if (err) {
+			p_err("can't get prog info (%u): %s",
+			      id, strerror(errno));
+			close(fd);
+			return -1;
+		}
+
+		if (!memcmp(tag, info.tag, BPF_TAG_SIZE))
+			return fd;
+
+		close(fd);
+	}
+}
+
+int prog_parse_fd(int *argc, char ***argv)
+{
+	int fd;
+
+	if (is_prefix(**argv, "id")) {
+		unsigned int id;
+		char *endptr;
+
+		NEXT_ARGP();
+
+		id = strtoul(**argv, &endptr, 0);
+		if (*endptr) {
+			p_err("can't parse %s as ID", **argv);
+			return -1;
+		}
+		NEXT_ARGP();
+
+		fd = bpf_prog_get_fd_by_id(id);
+		if (fd < 0)
+			p_err("get by id (%u): %s", id, strerror(errno));
+		return fd;
+	} else if (is_prefix(**argv, "tag")) {
+		unsigned char tag[BPF_TAG_SIZE];
+
+		NEXT_ARGP();
+
+		if (sscanf(**argv, BPF_TAG_FMT, tag, tag + 1, tag + 2,
+			   tag + 3, tag + 4, tag + 5, tag + 6, tag + 7)
+		    != BPF_TAG_SIZE) {
+			p_err("can't parse tag");
+			return -1;
+		}
+		NEXT_ARGP();
+
+		return prog_fd_by_tag(tag);
+	} else if (is_prefix(**argv, "pinned")) {
+		char *path;
+
+		NEXT_ARGP();
+
+		path = **argv;
+		NEXT_ARGP();
+
+		return open_obj_pinned_any(path, BPF_OBJ_PROG);
+	}
+
+	p_err("expected 'id', 'tag' or 'pinned', got: '%s'?", **argv);
+	return -1;
+}
+
+static void show_prog_maps(int fd, u32 num_maps)
+{
+	struct bpf_prog_info info = {};
+	__u32 len = sizeof(info);
+	__u32 map_ids[num_maps];
+	unsigned int i;
+	int err;
+
+	info.nr_map_ids = num_maps;
+	info.map_ids = ptr_to_u64(map_ids);
+
+	err = bpf_obj_get_info_by_fd(fd, &info, &len);
+	if (err || !info.nr_map_ids)
+		return;
+
+	if (json_output) {
+		jsonw_name(json_wtr, "map_ids");
+		jsonw_start_array(json_wtr);
+		for (i = 0; i < info.nr_map_ids; i++)
+			jsonw_uint(json_wtr, map_ids[i]);
+		jsonw_end_array(json_wtr);
+	} else {
+		printf("  map_ids ");
+		for (i = 0; i < info.nr_map_ids; i++)
+			printf("%u%s", map_ids[i],
+			       i == info.nr_map_ids - 1 ? "" : ",");
+	}
+}
+
+static void print_prog_json(struct bpf_prog_info *info, int fd)
+{
+	char *memlock;
+
+	jsonw_start_object(json_wtr);
+	jsonw_uint_field(json_wtr, "id", info->id);
+	if (info->type < ARRAY_SIZE(prog_type_name))
+		jsonw_string_field(json_wtr, "type",
+				   prog_type_name[info->type]);
+	else
+		jsonw_uint_field(json_wtr, "type", info->type);
+
+	if (*info->name)
+		jsonw_string_field(json_wtr, "name", info->name);
+
+	jsonw_name(json_wtr, "tag");
+	jsonw_printf(json_wtr, "\"" BPF_TAG_FMT "\"",
+		     info->tag[0], info->tag[1], info->tag[2], info->tag[3],
+		     info->tag[4], info->tag[5], info->tag[6], info->tag[7]);
+
+	if (info->status & BPF_PROG_STATUS_DEV_BOUND) {
+		jsonw_name(json_wtr, "dev");
+		if (info->ifindex) {
+			char name[IF_NAMESIZE];
+
+			if (!if_indextoname(info->ifindex, name))
+				jsonw_printf(json_wtr, "\"ifindex:%d\"",
+					     info->ifindex);
+			else
+				jsonw_printf(json_wtr, "\"%s\"", name);
+		} else {
+			jsonw_printf(json_wtr, "\"unknown\"");
+		}
+	}
+
+	if (info->load_time) {
+		char buf[32];
+
+		print_boot_time(info->load_time, buf, sizeof(buf));
+
+		/* Piggy back on load_time, since 0 uid is a valid one */
+		jsonw_string_field(json_wtr, "loaded_at", buf);
+		jsonw_uint_field(json_wtr, "uid", info->created_by_uid);
+	}
+
+	jsonw_uint_field(json_wtr, "bytes_xlated", info->xlated_prog_len);
+
+	if (info->jited_prog_len) {
+		jsonw_bool_field(json_wtr, "jited", true);
+		jsonw_uint_field(json_wtr, "bytes_jited", info->jited_prog_len);
+	} else {
+		jsonw_bool_field(json_wtr, "jited", false);
+	}
+
+	memlock = get_fdinfo(fd, "memlock");
+	if (memlock)
+		jsonw_int_field(json_wtr, "bytes_memlock", atoi(memlock));
+	free(memlock);
+
+	if (info->nr_map_ids)
+		show_prog_maps(fd, info->nr_map_ids);
+
+	if (!hash_empty(prog_table.table)) {
+		struct pinned_obj *obj;
+
+		jsonw_name(json_wtr, "pinned");
+		jsonw_start_array(json_wtr);
+		hash_for_each_possible(prog_table.table, obj, hash, info->id) {
+			if (obj->id == info->id)
+				jsonw_string(json_wtr, obj->path);
+		}
+		jsonw_end_array(json_wtr);
+	}
+
+	jsonw_end_object(json_wtr);
+}
+
+static void print_prog_plain(struct bpf_prog_info *info, int fd)
+{
+	char *memlock;
+
+	printf("%u: ", info->id);
+	if (info->type < ARRAY_SIZE(prog_type_name))
+		printf("%s  ", prog_type_name[info->type]);
+	else
+		printf("type %u  ", info->type);
+
+	if (*info->name)
+		printf("name %s  ", info->name);
+
+	printf("tag ");
+	fprint_hex(stdout, info->tag, BPF_TAG_SIZE, "");
+	printf(" ");
+
+	if (info->status & BPF_PROG_STATUS_DEV_BOUND) {
+		printf("dev ");
+		if (info->ifindex) {
+			char name[IF_NAMESIZE];
+
+			if (!if_indextoname(info->ifindex, name))
+				printf("ifindex:%d ", info->ifindex);
+			else
+				printf("%s ", name);
+		} else {
+			printf("unknown ");
+		}
+	}
+	printf("\n");
+
+	if (info->load_time) {
+		char buf[32];
+
+		print_boot_time(info->load_time, buf, sizeof(buf));
+
+		/* Piggy back on load_time, since 0 uid is a valid one */
+		printf("\tloaded_at %s  uid %u\n", buf, info->created_by_uid);
+	}
+
+	printf("\txlated %uB", info->xlated_prog_len);
+
+	if (info->jited_prog_len)
+		printf("  jited %uB", info->jited_prog_len);
+	else
+		printf("  not jited");
+
+	memlock = get_fdinfo(fd, "memlock");
+	if (memlock)
+		printf("  memlock %sB", memlock);
+	free(memlock);
+
+	if (info->nr_map_ids)
+		show_prog_maps(fd, info->nr_map_ids);
+
+	if (!hash_empty(prog_table.table)) {
+		struct pinned_obj *obj;
+
+		printf("\n");
+		hash_for_each_possible(prog_table.table, obj, hash, info->id) {
+			if (obj->id == info->id)
+				printf("\tpinned %s\n", obj->path);
+		}
+	}
+
+	printf("\n");
+}
+
+static int show_prog(int fd)
+{
+	struct bpf_prog_info info = {};
+	__u32 len = sizeof(info);
+	int err;
+
+	err = bpf_obj_get_info_by_fd(fd, &info, &len);
+	if (err) {
+		p_err("can't get prog info: %s", strerror(errno));
+		return -1;
+	}
+
+	if (json_output)
+		print_prog_json(&info, fd);
+	else
+		print_prog_plain(&info, fd);
+
+	return 0;
+}
+
+static int do_show(int argc, char **argv)
+{
+	__u32 id = 0;
+	int err;
+	int fd;
+
+	if (show_pinned)
+		build_pinned_obj_table(&prog_table, BPF_OBJ_PROG);
+
+	if (argc == 2) {
+		fd = prog_parse_fd(&argc, &argv);
+		if (fd < 0)
+			return -1;
+
+		return show_prog(fd);
+	}
+
+	if (argc)
+		return BAD_ARG();
+
+	if (json_output)
+		jsonw_start_array(json_wtr);
+	while (true) {
+		err = bpf_prog_get_next_id(id, &id);
+		if (err) {
+			if (errno == ENOENT) {
+				err = 0;
+				break;
+			}
+			p_err("can't get next program: %s%s", strerror(errno),
+			      errno == EINVAL ? " -- kernel too old?" : "");
+			err = -1;
+			break;
+		}
+
+		fd = bpf_prog_get_fd_by_id(id);
+		if (fd < 0) {
+			p_err("can't get prog by id (%u): %s",
+			      id, strerror(errno));
+			err = -1;
+			break;
+		}
+
+		err = show_prog(fd);
+		close(fd);
+		if (err)
+			break;
+	}
+
+	if (json_output)
+		jsonw_end_array(json_wtr);
+
+	return err;
+}
+
+static void print_insn(struct bpf_verifier_env *env, const char *fmt, ...)
+{
+	va_list args;
+
+	va_start(args, fmt);
+	vprintf(fmt, args);
+	va_end(args);
+}
+
+static void dump_xlated_plain(void *buf, unsigned int len, bool opcodes)
+{
+	struct bpf_insn *insn = buf;
+	bool double_insn = false;
+	unsigned int i;
+
+	for (i = 0; i < len / sizeof(*insn); i++) {
+		if (double_insn) {
+			double_insn = false;
+			continue;
+		}
+
+		double_insn = insn[i].code == (BPF_LD | BPF_IMM | BPF_DW);
+
+		printf("% 4d: ", i);
+		print_bpf_insn(print_insn, NULL, insn + i, true);
+
+		if (opcodes) {
+			printf("       ");
+			fprint_hex(stdout, insn + i, 8, " ");
+			if (double_insn && i < len - 1) {
+				printf(" ");
+				fprint_hex(stdout, insn + i + 1, 8, " ");
+			}
+			printf("\n");
+		}
+	}
+}
+
+static void print_insn_json(struct bpf_verifier_env *env, const char *fmt, ...)
+{
+	unsigned int l = strlen(fmt);
+	char chomped_fmt[l];
+	va_list args;
+
+	va_start(args, fmt);
+	if (l > 0) {
+		strncpy(chomped_fmt, fmt, l - 1);
+		chomped_fmt[l - 1] = '\0';
+	}
+	jsonw_vprintf_enquote(json_wtr, chomped_fmt, args);
+	va_end(args);
+}
+
+static void dump_xlated_json(void *buf, unsigned int len, bool opcodes)
+{
+	struct bpf_insn *insn = buf;
+	bool double_insn = false;
+	unsigned int i;
+
+	jsonw_start_array(json_wtr);
+	for (i = 0; i < len / sizeof(*insn); i++) {
+		if (double_insn) {
+			double_insn = false;
+			continue;
+		}
+		double_insn = insn[i].code == (BPF_LD | BPF_IMM | BPF_DW);
+
+		jsonw_start_object(json_wtr);
+		jsonw_name(json_wtr, "disasm");
+		print_bpf_insn(print_insn_json, NULL, insn + i, true);
+
+		if (opcodes) {
+			jsonw_name(json_wtr, "opcodes");
+			jsonw_start_object(json_wtr);
+
+			jsonw_name(json_wtr, "code");
+			jsonw_printf(json_wtr, "\"0x%02hhx\"", insn[i].code);
+
+			jsonw_name(json_wtr, "src_reg");
+			jsonw_printf(json_wtr, "\"0x%hhx\"", insn[i].src_reg);
+
+			jsonw_name(json_wtr, "dst_reg");
+			jsonw_printf(json_wtr, "\"0x%hhx\"", insn[i].dst_reg);
+
+			jsonw_name(json_wtr, "off");
+			print_hex_data_json((uint8_t *)(&insn[i].off), 2);
+
+			jsonw_name(json_wtr, "imm");
+			if (double_insn && i < len - 1)
+				print_hex_data_json((uint8_t *)(&insn[i].imm),
+						    12);
+			else
+				print_hex_data_json((uint8_t *)(&insn[i].imm),
+						    4);
+			jsonw_end_object(json_wtr);
+		}
+		jsonw_end_object(json_wtr);
+	}
+	jsonw_end_array(json_wtr);
+}
+
+static int do_dump(int argc, char **argv)
+{
+	struct bpf_prog_info info = {};
+	__u32 len = sizeof(info);
+	unsigned int buf_size;
+	char *filepath = NULL;
+	bool opcodes = false;
+	unsigned char *buf;
+	__u32 *member_len;
+	__u64 *member_ptr;
+	ssize_t n;
+	int err;
+	int fd;
+
+	if (is_prefix(*argv, "jited")) {
+		member_len = &info.jited_prog_len;
+		member_ptr = &info.jited_prog_insns;
+	} else if (is_prefix(*argv, "xlated")) {
+		member_len = &info.xlated_prog_len;
+		member_ptr = &info.xlated_prog_insns;
+	} else {
+		p_err("expected 'xlated' or 'jited', got: %s", *argv);
+		return -1;
+	}
+	NEXT_ARG();
+
+	if (argc < 2)
+		usage();
+
+	fd = prog_parse_fd(&argc, &argv);
+	if (fd < 0)
+		return -1;
+
+	if (is_prefix(*argv, "file")) {
+		NEXT_ARG();
+		if (!argc) {
+			p_err("expected file path");
+			return -1;
+		}
+
+		filepath = *argv;
+		NEXT_ARG();
+	} else if (is_prefix(*argv, "opcodes")) {
+		opcodes = true;
+		NEXT_ARG();
+	}
+
+	if (argc) {
+		usage();
+		return -1;
+	}
+
+	err = bpf_obj_get_info_by_fd(fd, &info, &len);
+	if (err) {
+		p_err("can't get prog info: %s", strerror(errno));
+		return -1;
+	}
+
+	if (!*member_len) {
+		p_info("no instructions returned");
+		close(fd);
+		return 0;
+	}
+
+	buf_size = *member_len;
+
+	buf = malloc(buf_size);
+	if (!buf) {
+		p_err("mem alloc failed");
+		close(fd);
+		return -1;
+	}
+
+	memset(&info, 0, sizeof(info));
+
+	*member_ptr = ptr_to_u64(buf);
+	*member_len = buf_size;
+
+	err = bpf_obj_get_info_by_fd(fd, &info, &len);
+	close(fd);
+	if (err) {
+		p_err("can't get prog info: %s", strerror(errno));
+		goto err_free;
+	}
+
+	if (*member_len > buf_size) {
+		p_err("too many instructions returned");
+		goto err_free;
+	}
+
+	if (filepath) {
+		fd = open(filepath, O_WRONLY | O_CREAT | O_TRUNC, 0600);
+		if (fd < 0) {
+			p_err("can't open file %s: %s", filepath,
+			      strerror(errno));
+			goto err_free;
+		}
+
+		n = write(fd, buf, *member_len);
+		close(fd);
+		if (n != *member_len) {
+			p_err("error writing output file: %s",
+			      n < 0 ? strerror(errno) : "short write");
+			goto err_free;
+		}
+	} else {
+		if (member_len == &info.jited_prog_len)
+			disasm_print_insn(buf, *member_len, opcodes);
+		else
+			if (json_output)
+				dump_xlated_json(buf, *member_len, opcodes);
+			else
+				dump_xlated_plain(buf, *member_len, opcodes);
+	}
+
+	free(buf);
+
+	return 0;
+
+err_free:
+	free(buf);
+	return -1;
+}
+
+static int do_pin(int argc, char **argv)
+{
+	int err;
+
+	err = do_pin_any(argc, argv, bpf_prog_get_fd_by_id);
+	if (!err && json_output)
+		jsonw_null(json_wtr);
+	return err;
+}
+
+static int do_help(int argc, char **argv)
+{
+	if (json_output) {
+		jsonw_null(json_wtr);
+		return 0;
+	}
+
+	fprintf(stderr,
+		"Usage: %s %s show [PROG]\n"
+		"       %s %s dump xlated PROG [{ file FILE | opcodes }]\n"
+		"       %s %s dump jited  PROG [{ file FILE | opcodes }]\n"
+		"       %s %s pin   PROG FILE\n"
+		"       %s %s help\n"
+		"\n"
+		"       " HELP_SPEC_PROGRAM "\n"
+		"       " HELP_SPEC_OPTIONS "\n"
+		"",
+		bin_name, argv[-2], bin_name, argv[-2], bin_name, argv[-2],
+		bin_name, argv[-2], bin_name, argv[-2]);
+
+	return 0;
+}
+
+static const struct cmd cmds[] = {
+	{ "show",	do_show },
+	{ "help",	do_help },
+	{ "dump",	do_dump },
+	{ "pin",	do_pin },
+	{ 0 }
+};
+
+int do_prog(int argc, char **argv)
+{
+	return cmd_select(cmds, argc, argv, do_help);
+}
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index 30f2ce76b517..e880ae6434ee 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -93,6 +93,7 @@ enum bpf_cmd {
 	BPF_PROG_GET_FD_BY_ID,
 	BPF_MAP_GET_FD_BY_ID,
 	BPF_OBJ_GET_INFO_BY_FD,
+	BPF_PROG_QUERY,
 };
 
 enum bpf_map_type {
@@ -112,6 +113,7 @@ enum bpf_map_type {
 	BPF_MAP_TYPE_HASH_OF_MAPS,
 	BPF_MAP_TYPE_DEVMAP,
 	BPF_MAP_TYPE_SOCKMAP,
+	BPF_MAP_TYPE_CPUMAP,
 };
 
 enum bpf_prog_type {
@@ -130,6 +132,7 @@ enum bpf_prog_type {
 	BPF_PROG_TYPE_LWT_XMIT,
 	BPF_PROG_TYPE_SOCK_OPS,
 	BPF_PROG_TYPE_SK_SKB,
+	BPF_PROG_TYPE_CGROUP_DEVICE,
 };
 
 enum bpf_attach_type {
@@ -139,16 +142,53 @@ enum bpf_attach_type {
 	BPF_CGROUP_SOCK_OPS,
 	BPF_SK_SKB_STREAM_PARSER,
 	BPF_SK_SKB_STREAM_VERDICT,
+	BPF_CGROUP_DEVICE,
 	__MAX_BPF_ATTACH_TYPE
 };
 
 #define MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE
 
-/* If BPF_F_ALLOW_OVERRIDE flag is used in BPF_PROG_ATTACH command
- * to the given target_fd cgroup the descendent cgroup will be able to
- * override effective bpf program that was inherited from this cgroup
+/* cgroup-bpf attach flags used in BPF_PROG_ATTACH command
+ *
+ * NONE(default): No further bpf programs allowed in the subtree.
+ *
+ * BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program,
+ * the program in this cgroup yields to sub-cgroup program.
+ *
+ * BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program,
+ * that cgroup program gets run in addition to the program in this cgroup.
+ *
+ * Only one program is allowed to be attached to a cgroup with
+ * NONE or BPF_F_ALLOW_OVERRIDE flag.
+ * Attaching another program on top of NONE or BPF_F_ALLOW_OVERRIDE will
+ * release old program and attach the new one. Attach flags has to match.
+ *
+ * Multiple programs are allowed to be attached to a cgroup with
+ * BPF_F_ALLOW_MULTI flag. They are executed in FIFO order
+ * (those that were attached first, run first)
+ * The programs of sub-cgroup are executed first, then programs of
+ * this cgroup and then programs of parent cgroup.
+ * When children program makes decision (like picking TCP CA or sock bind)
+ * parent program has a chance to override it.
+ *
+ * A cgroup with MULTI or OVERRIDE flag allows any attach flags in sub-cgroups.
+ * A cgroup with NONE doesn't allow any programs in sub-cgroups.
+ * Ex1:
+ * cgrp1 (MULTI progs A, B) ->
+ *    cgrp2 (OVERRIDE prog C) ->
+ *      cgrp3 (MULTI prog D) ->
+ *        cgrp4 (OVERRIDE prog E) ->
+ *          cgrp5 (NONE prog F)
+ * the event in cgrp5 triggers execution of F,D,A,B in that order.
+ * if prog F is detached, the execution is E,D,A,B
+ * if prog F and D are detached, the execution is E,A,B
+ * if prog F, E and D are detached, the execution is C,A,B
+ *
+ * All eligible programs are executed regardless of return code from
+ * earlier programs.
  */
 #define BPF_F_ALLOW_OVERRIDE	(1U << 0)
+#define BPF_F_ALLOW_MULTI	(1U << 1)
 
 /* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the
  * verifier will perform strict alignment checking as if the kernel
@@ -176,6 +216,15 @@ enum bpf_attach_type {
 /* Specify numa node during map creation */
 #define BPF_F_NUMA_NODE		(1U << 2)
 
+/* flags for BPF_PROG_QUERY */
+#define BPF_F_QUERY_EFFECTIVE	(1U << 0)
+
+#define BPF_OBJ_NAME_LEN 16U
+
+/* Flags for accessing BPF object */
+#define BPF_F_RDONLY		(1U << 3)
+#define BPF_F_WRONLY		(1U << 4)
+
 union bpf_attr {
 	struct { /* anonymous struct used by BPF_MAP_CREATE command */
 		__u32	map_type;	/* one of enum bpf_map_type */
@@ -189,6 +238,7 @@ union bpf_attr {
 		__u32	numa_node;	/* numa node (effective only if
 					 * BPF_F_NUMA_NODE is set).
 					 */
+		char	map_name[BPF_OBJ_NAME_LEN];
 	};
 
 	struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */
@@ -211,11 +261,14 @@ union bpf_attr {
 		__aligned_u64	log_buf;	/* user supplied buffer */
 		__u32		kern_version;	/* checked when prog_type=kprobe */
 		__u32		prog_flags;
+		char		prog_name[BPF_OBJ_NAME_LEN];
+		__u32		prog_target_ifindex;	/* ifindex of netdev to prep for */
 	};
 
 	struct { /* anonymous struct used by BPF_OBJ_* commands */
 		__aligned_u64	pathname;
 		__u32		bpf_fd;
+		__u32		file_flags;
 	};
 
 	struct { /* anonymous struct used by BPF_PROG_ATTACH/DETACH commands */
@@ -243,6 +296,7 @@ union bpf_attr {
 			__u32		map_id;
 		};
 		__u32		next_id;
+		__u32		open_flags;
 	};
 
 	struct { /* anonymous struct used by BPF_OBJ_GET_INFO_BY_FD */
@@ -250,6 +304,15 @@ union bpf_attr {
 		__u32		info_len;
 		__aligned_u64	info;
 	} info;
+
+	struct { /* anonymous struct used by BPF_PROG_QUERY command */
+		__u32		target_fd;	/* container object to query */
+		__u32		attach_type;
+		__u32		query_flags;
+		__u32		attach_flags;
+		__aligned_u64	prog_ids;
+		__u32		prog_cnt;
+	} query;
 } __attribute__((aligned(8)));
 
 /* BPF helper function descriptions:
@@ -554,12 +617,22 @@ union bpf_attr {
  * int bpf_setsockopt(bpf_socket, level, optname, optval, optlen)
  *     Calls setsockopt. Not all opts are available, only those with
  *     integer optvals plus TCP_CONGESTION.
- *     Supported levels: SOL_SOCKET and IPROTO_TCP
+ *     Supported levels: SOL_SOCKET and IPPROTO_TCP
+ *     @bpf_socket: pointer to bpf_socket
+ *     @level: SOL_SOCKET or IPPROTO_TCP
+ *     @optname: option name
+ *     @optval: pointer to option value
+ *     @optlen: length of optval in bytes
+ *     Return: 0 or negative error
+ *
+ * int bpf_getsockopt(bpf_socket, level, optname, optval, optlen)
+ *     Calls getsockopt. Not all opts are available.
+ *     Supported levels: IPPROTO_TCP
  *     @bpf_socket: pointer to bpf_socket
- *     @level: SOL_SOCKET or IPROTO_TCP
+ *     @level: IPPROTO_TCP
  *     @optname: option name
  *     @optval: pointer to option value
- *     @optlen: length of optval in byes
+ *     @optlen: length of optval in bytes
  *     Return: 0 or negative error
  *
  * int bpf_skb_adjust_room(skb, len_diff, mode, flags)
@@ -583,6 +656,27 @@ union bpf_attr {
  *	@map: pointer to sockmap to update
  *	@key: key to insert/update sock in map
  *	@flags: same flags as map update elem
+ *
+ * int bpf_xdp_adjust_meta(xdp_md, delta)
+ *     Adjust the xdp_md.data_meta by delta
+ *     @xdp_md: pointer to xdp_md
+ *     @delta: An positive/negative integer to be added to xdp_md.data_meta
+ *     Return: 0 on success or negative on error
+ *
+ * int bpf_perf_event_read_value(map, flags, buf, buf_size)
+ *     read perf event counter value and perf event enabled/running time
+ *     @map: pointer to perf_event_array map
+ *     @flags: index of event in the map or bitmask flags
+ *     @buf: buf to fill
+ *     @buf_size: size of the buf
+ *     Return: 0 on success or negative error code
+ *
+ * int bpf_perf_prog_read_value(ctx, buf, buf_size)
+ *     read perf prog attached perf event counter and enabled/running time
+ *     @ctx: pointer to ctx
+ *     @buf: buf to fill
+ *     @buf_size: size of the buf
+ *     Return : 0 on success or negative error code
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
@@ -639,6 +733,10 @@ union bpf_attr {
 	FN(redirect_map),		\
 	FN(sk_redirect_map),		\
 	FN(sock_map_update),		\
+	FN(xdp_adjust_meta),		\
+	FN(perf_event_read_value),	\
+	FN(perf_prog_read_value),	\
+	FN(getsockopt),
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
  * function eBPF program intends to call
@@ -682,7 +780,9 @@ enum bpf_func_id {
 #define BPF_F_ZERO_CSUM_TX		(1ULL << 1)
 #define BPF_F_DONT_FRAGMENT		(1ULL << 2)
 
-/* BPF_FUNC_perf_event_output and BPF_FUNC_perf_event_read flags. */
+/* BPF_FUNC_perf_event_output, BPF_FUNC_perf_event_read and
+ * BPF_FUNC_perf_event_read_value flags.
+ */
 #define BPF_F_INDEX_MASK		0xffffffffULL
 #define BPF_F_CURRENT_CPU		BPF_F_INDEX_MASK
 /* BPF_FUNC_perf_event_output for sk_buff input context. */
@@ -716,7 +816,7 @@ struct __sk_buff {
 	__u32 data_end;
 	__u32 napi_id;
 
-	/* accessed by BPF_PROG_TYPE_sk_skb types */
+	/* Accessed by BPF_PROG_TYPE_sk_skb types from here to ... */
 	__u32 family;
 	__u32 remote_ip4;	/* Stored in network byte order */
 	__u32 local_ip4;	/* Stored in network byte order */
@@ -724,6 +824,9 @@ struct __sk_buff {
 	__u32 local_ip6[4];	/* Stored in network byte order */
 	__u32 remote_port;	/* Stored in network byte order */
 	__u32 local_port;	/* stored in host byte order */
+	/* ... here. */
+
+	__u32 data_meta;
 };
 
 struct bpf_tunnel_key {
@@ -784,6 +887,7 @@ enum xdp_action {
 struct xdp_md {
 	__u32 data;
 	__u32 data_end;
+	__u32 data_meta;
 };
 
 enum sk_action {
@@ -793,6 +897,10 @@ enum sk_action {
 
 #define BPF_TAG_SIZE	8
 
+enum bpf_prog_status {
+	BPF_PROG_STATUS_DEV_BOUND	= (1 << 0),
+};
+
 struct bpf_prog_info {
 	__u32 type;
 	__u32 id;
@@ -801,6 +909,13 @@ struct bpf_prog_info {
 	__u32 xlated_prog_len;
 	__aligned_u64 jited_prog_insns;
 	__aligned_u64 xlated_prog_insns;
+	__u64 load_time;	/* ns since boottime */
+	__u32 created_by_uid;
+	__u32 nr_map_ids;
+	__aligned_u64 map_ids;
+	char name[BPF_OBJ_NAME_LEN];
+	__u32 ifindex;
+	__u32 status;
 } __attribute__((aligned(8)));
 
 struct bpf_map_info {
@@ -810,6 +925,7 @@ struct bpf_map_info {
 	__u32 value_size;
 	__u32 max_entries;
 	__u32 map_flags;
+	char  name[BPF_OBJ_NAME_LEN];
 } __attribute__((aligned(8)));
 
 /* User bpf_sock_ops struct to access socket values and specify request ops
@@ -859,9 +975,35 @@ enum {
 	BPF_SOCK_OPS_NEEDS_ECN,		/* If connection's congestion control
 					 * needs ECN
 					 */
+	BPF_SOCK_OPS_BASE_RTT,		/* Get base RTT. The correct value is
+					 * based on the path and may be
+					 * dependent on the congestion control
+					 * algorithm. In general it indicates
+					 * a congestion threshold. RTTs above
+					 * this indicate congestion
+					 */
 };
 
 #define TCP_BPF_IW		1001	/* Set TCP initial congestion window */
 #define TCP_BPF_SNDCWND_CLAMP	1002	/* Set sndcwnd_clamp */
 
+struct bpf_perf_event_value {
+	__u64 counter;
+	__u64 enabled;
+	__u64 running;
+};
+
+#define BPF_DEVCG_ACC_MKNOD	(1ULL << 0)
+#define BPF_DEVCG_ACC_READ	(1ULL << 1)
+#define BPF_DEVCG_ACC_WRITE	(1ULL << 2)
+
+#define BPF_DEVCG_DEV_BLOCK	(1ULL << 0)
+#define BPF_DEVCG_DEV_CHAR	(1ULL << 1)
+
+struct bpf_cgroup_dev_ctx {
+	__u32 access_type; /* (access << 16) | type */
+	__u32 major;
+	__u32 minor;
+};
+
 #endif /* _UAPI__LINUX_BPF_H__ */
diff --git a/tools/lib/bpf/bpf.c b/tools/lib/bpf/bpf.c
index 1d6907d379c9..5128677e4117 100644
--- a/tools/lib/bpf/bpf.c
+++ b/tools/lib/bpf/bpf.c
@@ -46,6 +46,8 @@
 # endif
 #endif
 
+#define min(x, y) ((x) < (y) ? (x) : (y))
+
 static inline __u64 ptr_to_u64(const void *ptr)
 {
 	return (__u64) (unsigned long) ptr;
@@ -57,10 +59,11 @@ static inline int sys_bpf(enum bpf_cmd cmd, union bpf_attr *attr,
 	return syscall(__NR_bpf, cmd, attr, size);
 }
 
-int bpf_create_map_node(enum bpf_map_type map_type, int key_size,
-			int value_size, int max_entries, __u32 map_flags,
-			int node)
+int bpf_create_map_node(enum bpf_map_type map_type, const char *name,
+			int key_size, int value_size, int max_entries,
+			__u32 map_flags, int node)
 {
+	__u32 name_len = name ? strlen(name) : 0;
 	union bpf_attr attr;
 
 	memset(&attr, '\0', sizeof(attr));
@@ -70,6 +73,8 @@ int bpf_create_map_node(enum bpf_map_type map_type, int key_size,
 	attr.value_size = value_size;
 	attr.max_entries = max_entries;
 	attr.map_flags = map_flags;
+	memcpy(attr.map_name, name, min(name_len, BPF_OBJ_NAME_LEN - 1));
+
 	if (node >= 0) {
 		attr.map_flags |= BPF_F_NUMA_NODE;
 		attr.numa_node = node;
@@ -81,14 +86,23 @@ int bpf_create_map_node(enum bpf_map_type map_type, int key_size,
 int bpf_create_map(enum bpf_map_type map_type, int key_size,
 		   int value_size, int max_entries, __u32 map_flags)
 {
-	return bpf_create_map_node(map_type, key_size, value_size,
+	return bpf_create_map_node(map_type, NULL, key_size, value_size,
 				   max_entries, map_flags, -1);
 }
 
-int bpf_create_map_in_map_node(enum bpf_map_type map_type, int key_size,
-			       int inner_map_fd, int max_entries,
+int bpf_create_map_name(enum bpf_map_type map_type, const char *name,
+			int key_size, int value_size, int max_entries,
+			__u32 map_flags)
+{
+	return bpf_create_map_node(map_type, name, key_size, value_size,
+				   max_entries, map_flags, -1);
+}
+
+int bpf_create_map_in_map_node(enum bpf_map_type map_type, const char *name,
+			       int key_size, int inner_map_fd, int max_entries,
 			       __u32 map_flags, int node)
 {
+	__u32 name_len = name ? strlen(name) : 0;
 	union bpf_attr attr;
 
 	memset(&attr, '\0', sizeof(attr));
@@ -99,6 +113,8 @@ int bpf_create_map_in_map_node(enum bpf_map_type map_type, int key_size,
 	attr.inner_map_fd = inner_map_fd;
 	attr.max_entries = max_entries;
 	attr.map_flags = map_flags;
+	memcpy(attr.map_name, name, min(name_len, BPF_OBJ_NAME_LEN - 1));
+
 	if (node >= 0) {
 		attr.map_flags |= BPF_F_NUMA_NODE;
 		attr.numa_node = node;
@@ -107,19 +123,24 @@ int bpf_create_map_in_map_node(enum bpf_map_type map_type, int key_size,
 	return sys_bpf(BPF_MAP_CREATE, &attr, sizeof(attr));
 }
 
-int bpf_create_map_in_map(enum bpf_map_type map_type, int key_size,
-			  int inner_map_fd, int max_entries, __u32 map_flags)
+int bpf_create_map_in_map(enum bpf_map_type map_type, const char *name,
+			  int key_size, int inner_map_fd, int max_entries,
+			  __u32 map_flags)
 {
-	return bpf_create_map_in_map_node(map_type, key_size, inner_map_fd,
-					  max_entries, map_flags, -1);
+	return bpf_create_map_in_map_node(map_type, name, key_size,
+					  inner_map_fd, max_entries, map_flags,
+					  -1);
 }
 
-int bpf_load_program(enum bpf_prog_type type, const struct bpf_insn *insns,
-		     size_t insns_cnt, const char *license,
-		     __u32 kern_version, char *log_buf, size_t log_buf_sz)
+int bpf_load_program_name(enum bpf_prog_type type, const char *name,
+			  const struct bpf_insn *insns,
+			  size_t insns_cnt, const char *license,
+			  __u32 kern_version, char *log_buf,
+			  size_t log_buf_sz)
 {
 	int fd;
 	union bpf_attr attr;
+	__u32 name_len = name ? strlen(name) : 0;
 
 	bzero(&attr, sizeof(attr));
 	attr.prog_type = type;
@@ -130,6 +151,7 @@ int bpf_load_program(enum bpf_prog_type type, const struct bpf_insn *insns,
 	attr.log_size = 0;
 	attr.log_level = 0;
 	attr.kern_version = kern_version;
+	memcpy(attr.prog_name, name, min(name_len, BPF_OBJ_NAME_LEN - 1));
 
 	fd = sys_bpf(BPF_PROG_LOAD, &attr, sizeof(attr));
 	if (fd >= 0 || !log_buf || !log_buf_sz)
@@ -143,6 +165,15 @@ int bpf_load_program(enum bpf_prog_type type, const struct bpf_insn *insns,
 	return sys_bpf(BPF_PROG_LOAD, &attr, sizeof(attr));
 }
 
+int bpf_load_program(enum bpf_prog_type type, const struct bpf_insn *insns,
+		     size_t insns_cnt, const char *license,
+		     __u32 kern_version, char *log_buf,
+		     size_t log_buf_sz)
+{
+	return bpf_load_program_name(type, NULL, insns, insns_cnt, license,
+				     kern_version, log_buf, log_buf_sz);
+}
+
 int bpf_verify_program(enum bpf_prog_type type, const struct bpf_insn *insns,
 		       size_t insns_cnt, int strict_alignment,
 		       const char *license, __u32 kern_version,
@@ -260,6 +291,38 @@ int bpf_prog_detach(int target_fd, enum bpf_attach_type type)
 	return sys_bpf(BPF_PROG_DETACH, &attr, sizeof(attr));
 }
 
+int bpf_prog_detach2(int prog_fd, int target_fd, enum bpf_attach_type type)
+{
+	union bpf_attr attr;
+
+	bzero(&attr, sizeof(attr));
+	attr.target_fd	 = target_fd;
+	attr.attach_bpf_fd = prog_fd;
+	attr.attach_type = type;
+
+	return sys_bpf(BPF_PROG_DETACH, &attr, sizeof(attr));
+}
+
+int bpf_prog_query(int target_fd, enum bpf_attach_type type, __u32 query_flags,
+		   __u32 *attach_flags, __u32 *prog_ids, __u32 *prog_cnt)
+{
+	union bpf_attr attr;
+	int ret;
+
+	bzero(&attr, sizeof(attr));
+	attr.query.target_fd	= target_fd;
+	attr.query.attach_type	= type;
+	attr.query.query_flags	= query_flags;
+	attr.query.prog_cnt	= *prog_cnt;
+	attr.query.prog_ids	= ptr_to_u64(prog_ids);
+
+	ret = sys_bpf(BPF_PROG_QUERY, &attr, sizeof(attr));
+	if (attach_flags)
+		*attach_flags = attr.query.attach_flags;
+	*prog_cnt = attr.query.prog_cnt;
+	return ret;
+}
+
 int bpf_prog_test_run(int prog_fd, int repeat, void *data, __u32 size,
 		      void *data_out, __u32 *size_out, __u32 *retval,
 		      __u32 *duration)
diff --git a/tools/lib/bpf/bpf.h b/tools/lib/bpf/bpf.h
index b8ea5843c39e..6534889e2b2f 100644
--- a/tools/lib/bpf/bpf.h
+++ b/tools/lib/bpf/bpf.h
@@ -24,19 +24,28 @@
 #include <linux/bpf.h>
 #include <stddef.h>
 
-int bpf_create_map_node(enum bpf_map_type map_type, int key_size,
-			int value_size, int max_entries, __u32 map_flags,
-			int node);
+int bpf_create_map_node(enum bpf_map_type map_type, const char *name,
+			int key_size, int value_size, int max_entries,
+			__u32 map_flags, int node);
+int bpf_create_map_name(enum bpf_map_type map_type, const char *name,
+			int key_size, int value_size, int max_entries,
+			__u32 map_flags);
 int bpf_create_map(enum bpf_map_type map_type, int key_size, int value_size,
 		   int max_entries, __u32 map_flags);
-int bpf_create_map_in_map_node(enum bpf_map_type map_type, int key_size,
-			       int inner_map_fd, int max_entries,
+int bpf_create_map_in_map_node(enum bpf_map_type map_type, const char *name,
+			       int key_size, int inner_map_fd, int max_entries,
 			       __u32 map_flags, int node);
-int bpf_create_map_in_map(enum bpf_map_type map_type, int key_size,
-			  int inner_map_fd, int max_entries, __u32 map_flags);
+int bpf_create_map_in_map(enum bpf_map_type map_type, const char *name,
+			  int key_size, int inner_map_fd, int max_entries,
+			  __u32 map_flags);
 
 /* Recommend log buffer size */
 #define BPF_LOG_BUF_SIZE 65536
+int bpf_load_program_name(enum bpf_prog_type type, const char *name,
+			  const struct bpf_insn *insns,
+			  size_t insns_cnt, const char *license,
+			  __u32 kern_version, char *log_buf,
+			  size_t log_buf_sz);
 int bpf_load_program(enum bpf_prog_type type, const struct bpf_insn *insns,
 		     size_t insns_cnt, const char *license,
 		     __u32 kern_version, char *log_buf,
@@ -57,6 +66,7 @@ int bpf_obj_get(const char *pathname);
 int bpf_prog_attach(int prog_fd, int attachable_fd, enum bpf_attach_type type,
 		    unsigned int flags);
 int bpf_prog_detach(int attachable_fd, enum bpf_attach_type type);
+int bpf_prog_detach2(int prog_fd, int attachable_fd, enum bpf_attach_type type);
 int bpf_prog_test_run(int prog_fd, int repeat, void *data, __u32 size,
 		      void *data_out, __u32 *size_out, __u32 *retval,
 		      __u32 *duration);
@@ -65,5 +75,6 @@ int bpf_map_get_next_id(__u32 start_id, __u32 *next_id);
 int bpf_prog_get_fd_by_id(__u32 id);
 int bpf_map_get_fd_by_id(__u32 id);
 int bpf_obj_get_info_by_fd(int prog_fd, void *info, __u32 *info_len);
-
+int bpf_prog_query(int target_fd, enum bpf_attach_type type, __u32 query_flags,
+		   __u32 *attach_flags, __u32 *prog_ids, __u32 *prog_cnt);
 #endif
diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index 35f6dfcdc565..5aa45f89da93 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -171,6 +171,7 @@ int libbpf_strerror(int err, char *buf, size_t size)
 struct bpf_program {
 	/* Index in elf obj file, for relocation use. */
 	int idx;
+	char *name;
 	char *section_name;
 	struct bpf_insn *insns;
 	size_t insns_cnt;
@@ -283,6 +284,7 @@ static void bpf_program__exit(struct bpf_program *prog)
 	prog->clear_priv = NULL;
 
 	bpf_program__unload(prog);
+	zfree(&prog->name);
 	zfree(&prog->section_name);
 	zfree(&prog->insns);
 	zfree(&prog->reloc_desc);
@@ -293,26 +295,27 @@ static void bpf_program__exit(struct bpf_program *prog)
 }
 
 static int
-bpf_program__init(void *data, size_t size, char *name, int idx,
-		    struct bpf_program *prog)
+bpf_program__init(void *data, size_t size, char *section_name, int idx,
+		  struct bpf_program *prog)
 {
 	if (size < sizeof(struct bpf_insn)) {
-		pr_warning("corrupted section '%s'\n", name);
+		pr_warning("corrupted section '%s'\n", section_name);
 		return -EINVAL;
 	}
 
 	bzero(prog, sizeof(*prog));
 
-	prog->section_name = strdup(name);
+	prog->section_name = strdup(section_name);
 	if (!prog->section_name) {
-		pr_warning("failed to alloc name for prog %s\n",
-			   name);
+		pr_warning("failed to alloc name for prog under section %s\n",
+			   section_name);
 		goto errout;
 	}
 
 	prog->insns = malloc(size);
 	if (!prog->insns) {
-		pr_warning("failed to alloc insns for %s\n", name);
+		pr_warning("failed to alloc insns for prog under section %s\n",
+			   section_name);
 		goto errout;
 	}
 	prog->insns_cnt = size / sizeof(struct bpf_insn);
@@ -331,12 +334,12 @@ errout:
 
 static int
 bpf_object__add_program(struct bpf_object *obj, void *data, size_t size,
-			char *name, int idx)
+			char *section_name, int idx)
 {
 	struct bpf_program prog, *progs;
 	int nr_progs, err;
 
-	err = bpf_program__init(data, size, name, idx, &prog);
+	err = bpf_program__init(data, size, section_name, idx, &prog);
 	if (err)
 		return err;
 
@@ -350,8 +353,8 @@ bpf_object__add_program(struct bpf_object *obj, void *data, size_t size,
 		 * is still valid, so don't need special treat for
 		 * bpf_close_object().
 		 */
-		pr_warning("failed to alloc a new program '%s'\n",
-			   name);
+		pr_warning("failed to alloc a new program under section '%s'\n",
+			   section_name);
 		bpf_program__exit(&prog);
 		return -ENOMEM;
 	}
@@ -364,6 +367,54 @@ bpf_object__add_program(struct bpf_object *obj, void *data, size_t size,
 	return 0;
 }
 
+static int
+bpf_object__init_prog_names(struct bpf_object *obj)
+{
+	Elf_Data *symbols = obj->efile.symbols;
+	struct bpf_program *prog;
+	size_t pi, si;
+
+	for (pi = 0; pi < obj->nr_programs; pi++) {
+		char *name = NULL;
+
+		prog = &obj->programs[pi];
+
+		for (si = 0; si < symbols->d_size / sizeof(GElf_Sym) && !name;
+		     si++) {
+			GElf_Sym sym;
+
+			if (!gelf_getsym(symbols, si, &sym))
+				continue;
+			if (sym.st_shndx != prog->idx)
+				continue;
+
+			name = elf_strptr(obj->efile.elf,
+					  obj->efile.strtabidx,
+					  sym.st_name);
+			if (!name) {
+				pr_warning("failed to get sym name string for prog %s\n",
+					   prog->section_name);
+				return -LIBBPF_ERRNO__LIBELF;
+			}
+		}
+
+		if (!name) {
+			pr_warning("failed to find sym for prog %s\n",
+				   prog->section_name);
+			return -EINVAL;
+		}
+
+		prog->name = strdup(name);
+		if (!prog->name) {
+			pr_warning("failed to allocate memory for prog sym %s\n",
+				   name);
+			return -ENOMEM;
+		}
+	}
+
+	return 0;
+}
+
 static struct bpf_object *bpf_object__new(const char *path,
 					  void *obj_buf,
 					  size_t obj_buf_sz)
@@ -528,31 +579,6 @@ bpf_object__init_kversion(struct bpf_object *obj,
 	return 0;
 }
 
-static int
-bpf_object__validate_maps(struct bpf_object *obj)
-{
-	int i;
-
-	/*
-	 * If there's only 1 map, the only error case should have been
-	 * catched in bpf_object__init_maps().
-	 */
-	if (!obj->maps || !obj->nr_maps || (obj->nr_maps == 1))
-		return 0;
-
-	for (i = 1; i < obj->nr_maps; i++) {
-		const struct bpf_map *a = &obj->maps[i - 1];
-		const struct bpf_map *b = &obj->maps[i];
-
-		if (b->offset - a->offset < sizeof(struct bpf_map_def)) {
-			pr_warning("corrupted map section in %s: map \"%s\" too small\n",
-				   obj->path, a->name);
-			return -EINVAL;
-		}
-	}
-	return 0;
-}
-
 static int compare_bpf_map(const void *_a, const void *_b)
 {
 	const struct bpf_map *a = _a;
@@ -564,7 +590,7 @@ static int compare_bpf_map(const void *_a, const void *_b)
 static int
 bpf_object__init_maps(struct bpf_object *obj)
 {
-	int i, map_idx, nr_maps = 0;
+	int i, map_idx, map_def_sz, nr_maps = 0;
 	Elf_Scn *scn;
 	Elf_Data *data;
 	Elf_Data *symbols = obj->efile.symbols;
@@ -607,6 +633,15 @@ bpf_object__init_maps(struct bpf_object *obj)
 	if (!nr_maps)
 		return 0;
 
+	/* Assume equally sized map definitions */
+	map_def_sz = data->d_size / nr_maps;
+	if (!data->d_size || (data->d_size % nr_maps) != 0) {
+		pr_warning("unable to determine map definition size "
+			   "section %s, %d maps in %zd bytes\n",
+			   obj->path, nr_maps, data->d_size);
+		return -EINVAL;
+	}
+
 	obj->maps = calloc(nr_maps, sizeof(obj->maps[0]));
 	if (!obj->maps) {
 		pr_warning("alloc maps for object failed\n");
@@ -639,7 +674,7 @@ bpf_object__init_maps(struct bpf_object *obj)
 				      obj->efile.strtabidx,
 				      sym.st_name);
 		obj->maps[map_idx].offset = sym.st_value;
-		if (sym.st_value + sizeof(struct bpf_map_def) > data->d_size) {
+		if (sym.st_value + map_def_sz > data->d_size) {
 			pr_warning("corrupted maps section in %s: last map \"%s\" too small\n",
 				   obj->path, map_name);
 			return -EINVAL;
@@ -653,12 +688,40 @@ bpf_object__init_maps(struct bpf_object *obj)
 		pr_debug("map %d is \"%s\"\n", map_idx,
 			 obj->maps[map_idx].name);
 		def = (struct bpf_map_def *)(data->d_buf + sym.st_value);
-		obj->maps[map_idx].def = *def;
+		/*
+		 * If the definition of the map in the object file fits in
+		 * bpf_map_def, copy it.  Any extra fields in our version
+		 * of bpf_map_def will default to zero as a result of the
+		 * calloc above.
+		 */
+		if (map_def_sz <= sizeof(struct bpf_map_def)) {
+			memcpy(&obj->maps[map_idx].def, def, map_def_sz);
+		} else {
+			/*
+			 * Here the map structure being read is bigger than what
+			 * we expect, truncate if the excess bits are all zero.
+			 * If they are not zero, reject this map as
+			 * incompatible.
+			 */
+			char *b;
+			for (b = ((char *)def) + sizeof(struct bpf_map_def);
+			     b < ((char *)def) + map_def_sz; b++) {
+				if (*b != 0) {
+					pr_warning("maps section in %s: \"%s\" "
+						   "has unrecognized, non-zero "
+						   "options\n",
+						   obj->path, map_name);
+					return -EINVAL;
+				}
+			}
+			memcpy(&obj->maps[map_idx].def, def,
+			       sizeof(struct bpf_map_def));
+		}
 		map_idx++;
 	}
 
 	qsort(obj->maps, obj->nr_maps, sizeof(obj->maps[0]), compare_bpf_map);
-	return bpf_object__validate_maps(obj);
+	return 0;
 }
 
 static int bpf_object__elf_collect(struct bpf_object *obj)
@@ -766,8 +829,12 @@ static int bpf_object__elf_collect(struct bpf_object *obj)
 		pr_warning("Corrupted ELF file: index of strtab invalid\n");
 		return LIBBPF_ERRNO__FORMAT;
 	}
-	if (obj->efile.maps_shndx >= 0)
+	if (obj->efile.maps_shndx >= 0) {
 		err = bpf_object__init_maps(obj);
+		if (err)
+			goto out;
+	}
+	err = bpf_object__init_prog_names(obj);
 out:
 	return err;
 }
@@ -870,11 +937,12 @@ bpf_object__create_maps(struct bpf_object *obj)
 		struct bpf_map_def *def = &obj->maps[i].def;
 		int *pfd = &obj->maps[i].fd;
 
-		*pfd = bpf_create_map(def->type,
-				      def->key_size,
-				      def->value_size,
-				      def->max_entries,
-				      0);
+		*pfd = bpf_create_map_name(def->type,
+					   obj->maps[i].name,
+					   def->key_size,
+					   def->value_size,
+					   def->max_entries,
+					   def->map_flags);
 		if (*pfd < 0) {
 			size_t j;
 			int err = *pfd;
@@ -982,7 +1050,7 @@ static int bpf_object__collect_reloc(struct bpf_object *obj)
 }
 
 static int
-load_program(enum bpf_prog_type type, struct bpf_insn *insns,
+load_program(enum bpf_prog_type type, const char *name, struct bpf_insn *insns,
 	     int insns_cnt, char *license, u32 kern_version, int *pfd)
 {
 	int ret;
@@ -995,8 +1063,8 @@ load_program(enum bpf_prog_type type, struct bpf_insn *insns,
 	if (!log_buf)
 		pr_warning("Alloc log buffer for bpf loader error, continue without log\n");
 
-	ret = bpf_load_program(type, insns, insns_cnt, license,
-			       kern_version, log_buf, BPF_LOG_BUF_SIZE);
+	ret = bpf_load_program_name(type, name, insns, insns_cnt, license,
+				    kern_version, log_buf, BPF_LOG_BUF_SIZE);
 
 	if (ret >= 0) {
 		*pfd = ret;
@@ -1021,9 +1089,9 @@ load_program(enum bpf_prog_type type, struct bpf_insn *insns,
 		if (type != BPF_PROG_TYPE_KPROBE) {
 			int fd;
 
-			fd = bpf_load_program(BPF_PROG_TYPE_KPROBE, insns,
-					      insns_cnt, license, kern_version,
-					      NULL, 0);
+			fd = bpf_load_program_name(BPF_PROG_TYPE_KPROBE, name,
+						   insns, insns_cnt, license,
+						   kern_version, NULL, 0);
 			if (fd >= 0) {
 				close(fd);
 				ret = -LIBBPF_ERRNO__PROGTYPE;
@@ -1067,8 +1135,8 @@ bpf_program__load(struct bpf_program *prog,
 			pr_warning("Program '%s' is inconsistent: nr(%d) != 1\n",
 				   prog->section_name, prog->instances.nr);
 		}
-		err = load_program(prog->type, prog->insns, prog->insns_cnt,
-				   license, kern_version, &fd);
+		err = load_program(prog->type, prog->name, prog->insns,
+				   prog->insns_cnt, license, kern_version, &fd);
 		if (!err)
 			prog->instances.fds[0] = fd;
 		goto out;
@@ -1096,7 +1164,8 @@ bpf_program__load(struct bpf_program *prog,
 			continue;
 		}
 
-		err = load_program(prog->type, result.new_insn_ptr,
+		err = load_program(prog->type, prog->name,
+				   result.new_insn_ptr,
 				   result.new_insn_cnt,
 				   license, kern_version, &fd);
 
diff --git a/tools/lib/bpf/libbpf.h b/tools/lib/bpf/libbpf.h
index 7959086eb9c9..6e20003109e0 100644
--- a/tools/lib/bpf/libbpf.h
+++ b/tools/lib/bpf/libbpf.h
@@ -207,6 +207,7 @@ struct bpf_map_def {
 	unsigned int key_size;
 	unsigned int value_size;
 	unsigned int max_entries;
+	unsigned int map_flags;
 };
 
 /*
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index eab7644a07b4..333a48655ee0 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -13,16 +13,17 @@ CFLAGS += -Wall -O2 -I$(APIDIR) -I$(LIBDIR) -I$(GENDIR) $(GENFLAGS) -I../../../i
 LDLIBS += -lcap -lelf
 
 TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test_progs \
-	test_align
+	test_align test_verifier_log test_dev_cgroup
 
 TEST_GEN_FILES = test_pkt_access.o test_xdp.o test_l4lb.o test_tcp_estats.o test_obj_id.o \
-	test_pkt_md_access.o test_xdp_redirect.o sockmap_parse_prog.o sockmap_verdict_prog.o
+	test_pkt_md_access.o test_xdp_redirect.o test_xdp_meta.o sockmap_parse_prog.o     \
+	sockmap_verdict_prog.o dev_cgroup.o
 
-TEST_PROGS := test_kmod.sh test_xdp_redirect.sh
+TEST_PROGS := test_kmod.sh test_xdp_redirect.sh test_xdp_meta.sh
 
 include ../lib.mk
 
-BPFOBJ := $(OUTPUT)/libbpf.a
+BPFOBJ := $(OUTPUT)/libbpf.a $(OUTPUT)/cgroup_helpers.c
 
 $(TEST_GEN_PROGS): $(BPFOBJ)
 
@@ -35,8 +36,20 @@ $(BPFOBJ): force
 	$(MAKE) -C $(BPFDIR) OUTPUT=$(OUTPUT)/
 
 CLANG ?= clang
+LLC   ?= llc
+
+PROBE := $(shell llc -march=bpf -mcpu=probe -filetype=null /dev/null 2>&1)
+
+# Let newer LLVM versions transparently probe the kernel for availability
+# of full BPF instruction set.
+ifeq ($(PROBE),)
+  CPU ?= probe
+else
+  CPU ?= generic
+endif
 
 %.o: %.c
 	$(CLANG) -I. -I./include/uapi -I../../../include/uapi \
-		-Wno-compare-distinct-pointer-types \
-		-O2 -target bpf -c $< -o $@
+		 -Wno-compare-distinct-pointer-types          \
+		 -O2 -target bpf -emit-llvm -c $< -o - |      \
+	$(LLC) -march=bpf -mcpu=$(CPU) -filetype=obj -o $@
diff --git a/tools/testing/selftests/bpf/bpf_helpers.h b/tools/testing/selftests/bpf/bpf_helpers.h
index 50353c10573c..fd9a17fa8a8b 100644
--- a/tools/testing/selftests/bpf/bpf_helpers.h
+++ b/tools/testing/selftests/bpf/bpf_helpers.h
@@ -63,14 +63,25 @@ static unsigned long long (*bpf_get_prandom_u32)(void) =
 	(void *) BPF_FUNC_get_prandom_u32;
 static int (*bpf_xdp_adjust_head)(void *ctx, int offset) =
 	(void *) BPF_FUNC_xdp_adjust_head;
+static int (*bpf_xdp_adjust_meta)(void *ctx, int offset) =
+	(void *) BPF_FUNC_xdp_adjust_meta;
 static int (*bpf_setsockopt)(void *ctx, int level, int optname, void *optval,
 			     int optlen) =
 	(void *) BPF_FUNC_setsockopt;
+static int (*bpf_getsockopt)(void *ctx, int level, int optname, void *optval,
+			     int optlen) =
+	(void *) BPF_FUNC_getsockopt;
 static int (*bpf_sk_redirect_map)(void *ctx, void *map, int key, int flags) =
 	(void *) BPF_FUNC_sk_redirect_map;
 static int (*bpf_sock_map_update)(void *map, void *key, void *value,
 				  unsigned long long flags) =
 	(void *) BPF_FUNC_sock_map_update;
+static int (*bpf_perf_event_read_value)(void *map, unsigned long long flags,
+					void *buf, unsigned int buf_size) =
+	(void *) BPF_FUNC_perf_event_read_value;
+static int (*bpf_perf_prog_read_value)(void *ctx, void *buf,
+				       unsigned int buf_size) =
+	(void *) BPF_FUNC_perf_prog_read_value;
 
 
 /* llvm builtin functions that eBPF C program may use to
@@ -110,7 +121,47 @@ static int (*bpf_skb_under_cgroup)(void *ctx, void *map, int index) =
 static int (*bpf_skb_change_head)(void *, int len, int flags) =
 	(void *) BPF_FUNC_skb_change_head;
 
+/* Scan the ARCH passed in from ARCH env variable (see Makefile) */
+#if defined(__TARGET_ARCH_x86)
+	#define bpf_target_x86
+	#define bpf_target_defined
+#elif defined(__TARGET_ARCH_s930x)
+	#define bpf_target_s930x
+	#define bpf_target_defined
+#elif defined(__TARGET_ARCH_arm64)
+	#define bpf_target_arm64
+	#define bpf_target_defined
+#elif defined(__TARGET_ARCH_mips)
+	#define bpf_target_mips
+	#define bpf_target_defined
+#elif defined(__TARGET_ARCH_powerpc)
+	#define bpf_target_powerpc
+	#define bpf_target_defined
+#elif defined(__TARGET_ARCH_sparc)
+	#define bpf_target_sparc
+	#define bpf_target_defined
+#else
+	#undef bpf_target_defined
+#endif
+
+/* Fall back to what the compiler says */
+#ifndef bpf_target_defined
 #if defined(__x86_64__)
+	#define bpf_target_x86
+#elif defined(__s390x__)
+	#define bpf_target_s930x
+#elif defined(__aarch64__)
+	#define bpf_target_arm64
+#elif defined(__mips__)
+	#define bpf_target_mips
+#elif defined(__powerpc__)
+	#define bpf_target_powerpc
+#elif defined(__sparc__)
+	#define bpf_target_sparc
+#endif
+#endif
+
+#if defined(bpf_target_x86)
 
 #define PT_REGS_PARM1(x) ((x)->di)
 #define PT_REGS_PARM2(x) ((x)->si)
@@ -123,7 +174,7 @@ static int (*bpf_skb_change_head)(void *, int len, int flags) =
 #define PT_REGS_SP(x) ((x)->sp)
 #define PT_REGS_IP(x) ((x)->ip)
 
-#elif defined(__s390x__)
+#elif defined(bpf_target_s390x)
 
 #define PT_REGS_PARM1(x) ((x)->gprs[2])
 #define PT_REGS_PARM2(x) ((x)->gprs[3])
@@ -136,7 +187,7 @@ static int (*bpf_skb_change_head)(void *, int len, int flags) =
 #define PT_REGS_SP(x) ((x)->gprs[15])
 #define PT_REGS_IP(x) ((x)->psw.addr)
 
-#elif defined(__aarch64__)
+#elif defined(bpf_target_arm64)
 
 #define PT_REGS_PARM1(x) ((x)->regs[0])
 #define PT_REGS_PARM2(x) ((x)->regs[1])
@@ -149,7 +200,7 @@ static int (*bpf_skb_change_head)(void *, int len, int flags) =
 #define PT_REGS_SP(x) ((x)->sp)
 #define PT_REGS_IP(x) ((x)->pc)
 
-#elif defined(__mips__)
+#elif defined(bpf_target_mips)
 
 #define PT_REGS_PARM1(x) ((x)->regs[4])
 #define PT_REGS_PARM2(x) ((x)->regs[5])
@@ -162,7 +213,7 @@ static int (*bpf_skb_change_head)(void *, int len, int flags) =
 #define PT_REGS_SP(x) ((x)->regs[29])
 #define PT_REGS_IP(x) ((x)->cp0_epc)
 
-#elif defined(__powerpc__)
+#elif defined(bpf_target_powerpc)
 
 #define PT_REGS_PARM1(x) ((x)->gpr[3])
 #define PT_REGS_PARM2(x) ((x)->gpr[4])
@@ -173,7 +224,7 @@ static int (*bpf_skb_change_head)(void *, int len, int flags) =
 #define PT_REGS_SP(x) ((x)->sp)
 #define PT_REGS_IP(x) ((x)->nip)
 
-#elif defined(__sparc__)
+#elif defined(bpf_target_sparc)
 
 #define PT_REGS_PARM1(x) ((x)->u_regs[UREG_I0])
 #define PT_REGS_PARM2(x) ((x)->u_regs[UREG_I1])
@@ -183,6 +234,8 @@ static int (*bpf_skb_change_head)(void *, int len, int flags) =
 #define PT_REGS_RET(x) ((x)->u_regs[UREG_I7])
 #define PT_REGS_RC(x) ((x)->u_regs[UREG_I0])
 #define PT_REGS_SP(x) ((x)->u_regs[UREG_FP])
+
+/* Should this also be a bpf_target check for the sparc case? */
 #if defined(__arch64__)
 #define PT_REGS_IP(x) ((x)->tpc)
 #else
@@ -191,10 +244,10 @@ static int (*bpf_skb_change_head)(void *, int len, int flags) =
 
 #endif
 
-#ifdef __powerpc__
+#ifdef bpf_target_powerpc
 #define BPF_KPROBE_READ_RET_IP(ip, ctx)		({ (ip) = (ctx)->link; })
 #define BPF_KRETPROBE_READ_RET_IP		BPF_KPROBE_READ_RET_IP
-#elif defined(__sparc__)
+#elif bpf_target_sparc
 #define BPF_KPROBE_READ_RET_IP(ip, ctx)		({ (ip) = PT_REGS_RET(ctx); })
 #define BPF_KRETPROBE_READ_RET_IP		BPF_KPROBE_READ_RET_IP
 #else
diff --git a/tools/testing/selftests/bpf/cgroup_helpers.c b/tools/testing/selftests/bpf/cgroup_helpers.c
new file mode 100644
index 000000000000..f3bca3ade0f3
--- /dev/null
+++ b/tools/testing/selftests/bpf/cgroup_helpers.c
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0
+#define _GNU_SOURCE
+#include <sched.h>
+#include <sys/mount.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <linux/limits.h>
+#include <stdio.h>
+#include <linux/sched.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <ftw.h>
+
+
+#include "cgroup_helpers.h"
+
+/*
+ * To avoid relying on the system setup, when setup_cgroup_env is called
+ * we create a new mount namespace, and cgroup namespace. The cgroup2
+ * root is mounted at CGROUP_MOUNT_PATH
+ *
+ * Unfortunately, most people don't have cgroupv2 enabled at this point in time.
+ * It's easier to create our own mount namespace and manage it ourselves.
+ *
+ * We assume /mnt exists.
+ */
+
+#define WALK_FD_LIMIT			16
+#define CGROUP_MOUNT_PATH		"/mnt"
+#define CGROUP_WORK_DIR			"/cgroup-test-work-dir"
+#define format_cgroup_path(buf, path) \
+	snprintf(buf, sizeof(buf), "%s%s%s", CGROUP_MOUNT_PATH, \
+		 CGROUP_WORK_DIR, path)
+
+/**
+ * setup_cgroup_environment() - Setup the cgroup environment
+ *
+ * After calling this function, cleanup_cgroup_environment should be called
+ * once testing is complete.
+ *
+ * This function will print an error to stderr and return 1 if it is unable
+ * to setup the cgroup environment. If setup is successful, 0 is returned.
+ */
+int setup_cgroup_environment(void)
+{
+	char cgroup_workdir[PATH_MAX + 1];
+
+	format_cgroup_path(cgroup_workdir, "");
+
+	if (unshare(CLONE_NEWNS)) {
+		log_err("unshare");
+		return 1;
+	}
+
+	if (mount("none", "/", NULL, MS_REC | MS_PRIVATE, NULL)) {
+		log_err("mount fakeroot");
+		return 1;
+	}
+
+	if (mount("none", CGROUP_MOUNT_PATH, "cgroup2", 0, NULL) && errno != EBUSY) {
+		log_err("mount cgroup2");
+		return 1;
+	}
+
+	/* Cleanup existing failed runs, now that the environment is setup */
+	cleanup_cgroup_environment();
+
+	if (mkdir(cgroup_workdir, 0777) && errno != EEXIST) {
+		log_err("mkdir cgroup work dir");
+		return 1;
+	}
+
+	return 0;
+}
+
+static int nftwfunc(const char *filename, const struct stat *statptr,
+		    int fileflags, struct FTW *pfwt)
+{
+	if ((fileflags & FTW_D) && rmdir(filename))
+		log_err("Removing cgroup: %s", filename);
+	return 0;
+}
+
+
+static int join_cgroup_from_top(char *cgroup_path)
+{
+	char cgroup_procs_path[PATH_MAX + 1];
+	pid_t pid = getpid();
+	int fd, rc = 0;
+
+	snprintf(cgroup_procs_path, sizeof(cgroup_procs_path),
+		 "%s/cgroup.procs", cgroup_path);
+
+	fd = open(cgroup_procs_path, O_WRONLY);
+	if (fd < 0) {
+		log_err("Opening Cgroup Procs: %s", cgroup_procs_path);
+		return 1;
+	}
+
+	if (dprintf(fd, "%d\n", pid) < 0) {
+		log_err("Joining Cgroup");
+		rc = 1;
+	}
+
+	close(fd);
+	return rc;
+}
+
+/**
+ * join_cgroup() - Join a cgroup
+ * @path: The cgroup path, relative to the workdir, to join
+ *
+ * This function expects a cgroup to already be created, relative to the cgroup
+ * work dir, and it joins it. For example, passing "/my-cgroup" as the path
+ * would actually put the calling process into the cgroup
+ * "/cgroup-test-work-dir/my-cgroup"
+ *
+ * On success, it returns 0, otherwise on failure it returns 1.
+ */
+int join_cgroup(char *path)
+{
+	char cgroup_path[PATH_MAX + 1];
+
+	format_cgroup_path(cgroup_path, path);
+	return join_cgroup_from_top(cgroup_path);
+}
+
+/**
+ * cleanup_cgroup_environment() - Cleanup Cgroup Testing Environment
+ *
+ * This is an idempotent function to delete all temporary cgroups that
+ * have been created during the test, including the cgroup testing work
+ * directory.
+ *
+ * At call time, it moves the calling process to the root cgroup, and then
+ * runs the deletion process. It is idempotent, and should not fail, unless
+ * a process is lingering.
+ *
+ * On failure, it will print an error to stderr, and try to continue.
+ */
+void cleanup_cgroup_environment(void)
+{
+	char cgroup_workdir[PATH_MAX + 1];
+
+	format_cgroup_path(cgroup_workdir, "");
+	join_cgroup_from_top(CGROUP_MOUNT_PATH);
+	nftw(cgroup_workdir, nftwfunc, WALK_FD_LIMIT, FTW_DEPTH | FTW_MOUNT);
+}
+
+/**
+ * create_and_get_cgroup() - Create a cgroup, relative to workdir, and get the FD
+ * @path: The cgroup path, relative to the workdir, to join
+ *
+ * This function creates a cgroup under the top level workdir and returns the
+ * file descriptor. It is idempotent.
+ *
+ * On success, it returns the file descriptor. On failure it returns 0.
+ * If there is a failure, it prints the error to stderr.
+ */
+int create_and_get_cgroup(char *path)
+{
+	char cgroup_path[PATH_MAX + 1];
+	int fd;
+
+	format_cgroup_path(cgroup_path, path);
+	if (mkdir(cgroup_path, 0777) && errno != EEXIST) {
+		log_err("mkdiring cgroup %s .. %s", path, cgroup_path);
+		return 0;
+	}
+
+	fd = open(cgroup_path, O_RDONLY);
+	if (fd < 0) {
+		log_err("Opening Cgroup");
+		return 0;
+	}
+
+	return fd;
+}
diff --git a/tools/testing/selftests/bpf/cgroup_helpers.h b/tools/testing/selftests/bpf/cgroup_helpers.h
new file mode 100644
index 000000000000..06485e0002b3
--- /dev/null
+++ b/tools/testing/selftests/bpf/cgroup_helpers.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __CGROUP_HELPERS_H
+#define __CGROUP_HELPERS_H
+#include <errno.h>
+#include <string.h>
+
+#define clean_errno() (errno == 0 ? "None" : strerror(errno))
+#define log_err(MSG, ...) fprintf(stderr, "(%s:%d: errno: %s) " MSG "\n", \
+	__FILE__, __LINE__, clean_errno(), ##__VA_ARGS__)
+
+
+int create_and_get_cgroup(char *path);
+int join_cgroup(char *path);
+int setup_cgroup_environment(void);
+void cleanup_cgroup_environment(void);
+
+#endif
diff --git a/tools/testing/selftests/bpf/dev_cgroup.c b/tools/testing/selftests/bpf/dev_cgroup.c
new file mode 100644
index 000000000000..ce41a3475f27
--- /dev/null
+++ b/tools/testing/selftests/bpf/dev_cgroup.c
@@ -0,0 +1,60 @@
+/* Copyright (c) 2017 Facebook
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ */
+
+#include <linux/bpf.h>
+#include <linux/version.h>
+#include "bpf_helpers.h"
+
+SEC("cgroup/dev")
+int bpf_prog1(struct bpf_cgroup_dev_ctx *ctx)
+{
+	short type = ctx->access_type & 0xFFFF;
+#ifdef DEBUG
+	short access = ctx->access_type >> 16;
+	char fmt[] = "  %d:%d    \n";
+
+	switch (type) {
+	case BPF_DEVCG_DEV_BLOCK:
+		fmt[0] = 'b';
+		break;
+	case BPF_DEVCG_DEV_CHAR:
+		fmt[0] = 'c';
+		break;
+	default:
+		fmt[0] = '?';
+		break;
+	}
+
+	if (access & BPF_DEVCG_ACC_READ)
+		fmt[8] = 'r';
+
+	if (access & BPF_DEVCG_ACC_WRITE)
+		fmt[9] = 'w';
+
+	if (access & BPF_DEVCG_ACC_MKNOD)
+		fmt[10] = 'm';
+
+	bpf_trace_printk(fmt, sizeof(fmt), ctx->major, ctx->minor);
+#endif
+
+	/* Allow access to /dev/zero and /dev/random.
+	 * Forbid everything else.
+	 */
+	if (ctx->major != 1 || type != BPF_DEVCG_DEV_CHAR)
+		return 0;
+
+	switch (ctx->minor) {
+	case 5: /* 1:5 /dev/zero */
+	case 9: /* 1:9 /dev/urandom */
+		return 1;
+	}
+
+	return 0;
+}
+
+char _license[] SEC("license") = "GPL";
+__u32 _version SEC("version") = LINUX_VERSION_CODE;
diff --git a/tools/testing/selftests/bpf/sockmap_parse_prog.c b/tools/testing/selftests/bpf/sockmap_parse_prog.c
index fae3b96c3aa4..a1dec2b6d9c5 100644
--- a/tools/testing/selftests/bpf/sockmap_parse_prog.c
+++ b/tools/testing/selftests/bpf/sockmap_parse_prog.c
@@ -29,9 +29,6 @@ int bpf_prog1(struct __sk_buff *skb)
 	 * fields.
 	 */
 	d[7] = 1;
-
-	bpf_printk("parse: data[0] = (%u): local_port %i remote %i\n",
-		   d[0], lport, bpf_ntohl(rport));
 	return skb->len;
 }
 
diff --git a/tools/testing/selftests/bpf/sockmap_verdict_prog.c b/tools/testing/selftests/bpf/sockmap_verdict_prog.c
index 2cd2d552938b..d7bea972cb21 100644
--- a/tools/testing/selftests/bpf/sockmap_verdict_prog.c
+++ b/tools/testing/selftests/bpf/sockmap_verdict_prog.c
@@ -58,8 +58,6 @@ int bpf_prog2(struct __sk_buff *skb)
 	d[6] = 0xe;
 	d[7] = 0xf;
 
-	bpf_printk("verdict: data[0] = redir(%u:%u)\n", map, sk);
-
 	if (!map)
 		return bpf_sk_redirect_map(skb, &sock_map_rx, sk, 0);
 	return bpf_sk_redirect_map(skb, &sock_map_tx, sk, 0);
diff --git a/tools/testing/selftests/bpf/test_dev_cgroup.c b/tools/testing/selftests/bpf/test_dev_cgroup.c
new file mode 100644
index 000000000000..02c85d6c89b0
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_dev_cgroup.c
@@ -0,0 +1,93 @@
+/* Copyright (c) 2017 Facebook
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <errno.h>
+#include <assert.h>
+
+#include <linux/bpf.h>
+#include <bpf/bpf.h>
+#include <bpf/libbpf.h>
+
+#include "cgroup_helpers.h"
+
+#define DEV_CGROUP_PROG "./dev_cgroup.o"
+
+#define TEST_CGROUP "test-bpf-based-device-cgroup/"
+
+int main(int argc, char **argv)
+{
+	struct bpf_object *obj;
+	int error = EXIT_FAILURE;
+	int prog_fd, cgroup_fd;
+	__u32 prog_cnt;
+
+	if (bpf_prog_load(DEV_CGROUP_PROG, BPF_PROG_TYPE_CGROUP_DEVICE,
+			  &obj, &prog_fd)) {
+		printf("Failed to load DEV_CGROUP program\n");
+		goto err;
+	}
+
+	if (setup_cgroup_environment()) {
+		printf("Failed to load DEV_CGROUP program\n");
+		goto err;
+	}
+
+	/* Create a cgroup, get fd, and join it */
+	cgroup_fd = create_and_get_cgroup(TEST_CGROUP);
+	if (!cgroup_fd) {
+		printf("Failed to create test cgroup\n");
+		goto err;
+	}
+
+	if (join_cgroup(TEST_CGROUP)) {
+		printf("Failed to join cgroup\n");
+		goto err;
+	}
+
+	/* Attach bpf program */
+	if (bpf_prog_attach(prog_fd, cgroup_fd, BPF_CGROUP_DEVICE, 0)) {
+		printf("Failed to attach DEV_CGROUP program");
+		goto err;
+	}
+
+	if (bpf_prog_query(cgroup_fd, BPF_CGROUP_DEVICE, 0, NULL, NULL,
+			   &prog_cnt)) {
+		printf("Failed to query attached programs");
+		goto err;
+	}
+
+	/* All operations with /dev/zero and and /dev/urandom are allowed,
+	 * everything else is forbidden.
+	 */
+	assert(system("rm -f /tmp/test_dev_cgroup_null") == 0);
+	assert(system("mknod /tmp/test_dev_cgroup_null c 1 3"));
+	assert(system("rm -f /tmp/test_dev_cgroup_null") == 0);
+
+	/* /dev/zero is whitelisted */
+	assert(system("rm -f /tmp/test_dev_cgroup_zero") == 0);
+	assert(system("mknod /tmp/test_dev_cgroup_zero c 1 5") == 0);
+	assert(system("rm -f /tmp/test_dev_cgroup_zero") == 0);
+
+	assert(system("dd if=/dev/urandom of=/dev/zero count=64") == 0);
+
+	/* src is allowed, target is forbidden */
+	assert(system("dd if=/dev/urandom of=/dev/full count=64"));
+
+	/* src is forbidden, target is allowed */
+	assert(system("dd if=/dev/random of=/dev/zero count=64"));
+
+	error = 0;
+	printf("test_dev_cgroup:PASS\n");
+
+err:
+	cleanup_cgroup_environment();
+
+	return error;
+}
diff --git a/tools/testing/selftests/bpf/test_lpm_map.c b/tools/testing/selftests/bpf/test_lpm_map.c
index f93a333cbf2c..f61480641b6e 100644
--- a/tools/testing/selftests/bpf/test_lpm_map.c
+++ b/tools/testing/selftests/bpf/test_lpm_map.c
@@ -32,6 +32,10 @@ struct tlpm_node {
 	uint8_t key[];
 };
 
+static struct tlpm_node *tlpm_match(struct tlpm_node *list,
+				    const uint8_t *key,
+				    size_t n_bits);
+
 static struct tlpm_node *tlpm_add(struct tlpm_node *list,
 				  const uint8_t *key,
 				  size_t n_bits)
@@ -39,9 +43,17 @@ static struct tlpm_node *tlpm_add(struct tlpm_node *list,
 	struct tlpm_node *node;
 	size_t n;
 
+	n = (n_bits + 7) / 8;
+
+	/* 'overwrite' an equivalent entry if one already exists */
+	node = tlpm_match(list, key, n_bits);
+	if (node && node->n_bits == n_bits) {
+		memcpy(node->key, key, n);
+		return list;
+	}
+
 	/* add new entry with @key/@n_bits to @list and return new head */
 
-	n = (n_bits + 7) / 8;
 	node = malloc(sizeof(*node) + n);
 	assert(node);
 
@@ -93,6 +105,34 @@ static struct tlpm_node *tlpm_match(struct tlpm_node *list,
 	return best;
 }
 
+static struct tlpm_node *tlpm_delete(struct tlpm_node *list,
+				     const uint8_t *key,
+				     size_t n_bits)
+{
+	struct tlpm_node *best = tlpm_match(list, key, n_bits);
+	struct tlpm_node *node;
+
+	if (!best || best->n_bits != n_bits)
+		return list;
+
+	if (best == list) {
+		node = best->next;
+		free(best);
+		return node;
+	}
+
+	for (node = list; node; node = node->next) {
+		if (node->next == best) {
+			node->next = best->next;
+			free(best);
+			return list;
+		}
+	}
+	/* should never get here */
+	assert(0);
+	return list;
+}
+
 static void test_lpm_basic(void)
 {
 	struct tlpm_node *list = NULL, *t1, *t2;
@@ -115,6 +155,13 @@ static void test_lpm_basic(void)
 	assert(t1 == tlpm_match(list, (uint8_t[]){ 0xff, 0xff }, 15));
 	assert(!tlpm_match(list, (uint8_t[]){ 0x7f, 0xff }, 16));
 
+	list = tlpm_delete(list, (uint8_t[]){ 0xff, 0xff }, 16);
+	assert(t1 == tlpm_match(list, (uint8_t[]){ 0xff }, 8));
+	assert(t1 == tlpm_match(list, (uint8_t[]){ 0xff, 0xff }, 16));
+
+	list = tlpm_delete(list, (uint8_t[]){ 0xff }, 8);
+	assert(!tlpm_match(list, (uint8_t[]){ 0xff }, 8));
+
 	tlpm_clear(list);
 }
 
@@ -159,7 +206,7 @@ static void test_lpm_order(void)
 
 static void test_lpm_map(int keysize)
 {
-	size_t i, j, n_matches, n_nodes, n_lookups;
+	size_t i, j, n_matches, n_matches_after_delete, n_nodes, n_lookups;
 	struct tlpm_node *t, *list = NULL;
 	struct bpf_lpm_trie_key *key;
 	uint8_t *data, *value;
@@ -171,6 +218,7 @@ static void test_lpm_map(int keysize)
 	 */
 
 	n_matches = 0;
+	n_matches_after_delete = 0;
 	n_nodes = 1 << 8;
 	n_lookups = 1 << 16;
 
@@ -224,15 +272,54 @@ static void test_lpm_map(int keysize)
 		}
 	}
 
+	/* Remove the first half of the elements in the tlpm and the
+	 * corresponding nodes from the bpf-lpm.  Then run the same
+	 * large number of random lookups in both and make sure they match.
+	 * Note: we need to count the number of nodes actually inserted
+	 * since there may have been duplicates.
+	 */
+	for (i = 0, t = list; t; i++, t = t->next)
+		;
+	for (j = 0; j < i / 2; ++j) {
+		key->prefixlen = list->n_bits;
+		memcpy(key->data, list->key, keysize);
+		r = bpf_map_delete_elem(map, key);
+		assert(!r);
+		list = tlpm_delete(list, list->key, list->n_bits);
+		assert(list);
+	}
+	for (i = 0; i < n_lookups; ++i) {
+		for (j = 0; j < keysize; ++j)
+			data[j] = rand() & 0xff;
+
+		t = tlpm_match(list, data, 8 * keysize);
+
+		key->prefixlen = 8 * keysize;
+		memcpy(key->data, data, keysize);
+		r = bpf_map_lookup_elem(map, key, value);
+		assert(!r || errno == ENOENT);
+		assert(!t == !!r);
+
+		if (t) {
+			++n_matches_after_delete;
+			assert(t->n_bits == value[keysize]);
+			for (j = 0; j < t->n_bits; ++j)
+				assert((t->key[j / 8] & (1 << (7 - j % 8))) ==
+				       (value[j / 8] & (1 << (7 - j % 8))));
+		}
+	}
+
 	close(map);
 	tlpm_clear(list);
 
 	/* With 255 random nodes in the map, we are pretty likely to match
 	 * something on every lookup. For statistics, use this:
 	 *
-	 *     printf("  nodes: %zu\n"
-	 *            "lookups: %zu\n"
-	 *            "matches: %zu\n", n_nodes, n_lookups, n_matches);
+	 *     printf("          nodes: %zu\n"
+	 *            "        lookups: %zu\n"
+	 *            "        matches: %zu\n"
+	 *            "matches(delete): %zu\n",
+	 *            n_nodes, n_lookups, n_matches, n_matches_after_delete);
 	 */
 }
 
@@ -332,6 +419,108 @@ static void test_lpm_ipaddr(void)
 	close(map_fd_ipv6);
 }
 
+static void test_lpm_delete(void)
+{
+	struct bpf_lpm_trie_key *key;
+	size_t key_size;
+	int map_fd;
+	__u64 value;
+
+	key_size = sizeof(*key) + sizeof(__u32);
+	key = alloca(key_size);
+
+	map_fd = bpf_create_map(BPF_MAP_TYPE_LPM_TRIE,
+				key_size, sizeof(value),
+				100, BPF_F_NO_PREALLOC);
+	assert(map_fd >= 0);
+
+	/* Add nodes:
+	 * 192.168.0.0/16   (1)
+	 * 192.168.0.0/24   (2)
+	 * 192.168.128.0/24 (3)
+	 * 192.168.1.0/24   (4)
+	 *
+	 *         (1)
+	 *        /   \
+         *     (IM)    (3)
+	 *    /   \
+         *   (2)  (4)
+	 */
+	value = 1;
+	key->prefixlen = 16;
+	inet_pton(AF_INET, "192.168.0.0", key->data);
+	assert(bpf_map_update_elem(map_fd, key, &value, 0) == 0);
+
+	value = 2;
+	key->prefixlen = 24;
+	inet_pton(AF_INET, "192.168.0.0", key->data);
+	assert(bpf_map_update_elem(map_fd, key, &value, 0) == 0);
+
+	value = 3;
+	key->prefixlen = 24;
+	inet_pton(AF_INET, "192.168.128.0", key->data);
+	assert(bpf_map_update_elem(map_fd, key, &value, 0) == 0);
+
+	value = 4;
+	key->prefixlen = 24;
+	inet_pton(AF_INET, "192.168.1.0", key->data);
+	assert(bpf_map_update_elem(map_fd, key, &value, 0) == 0);
+
+	/* remove non-existent node */
+	key->prefixlen = 32;
+	inet_pton(AF_INET, "10.0.0.1", key->data);
+	assert(bpf_map_lookup_elem(map_fd, key, &value) == -1 &&
+		errno == ENOENT);
+
+	/* assert initial lookup */
+	key->prefixlen = 32;
+	inet_pton(AF_INET, "192.168.0.1", key->data);
+	assert(bpf_map_lookup_elem(map_fd, key, &value) == 0);
+	assert(value == 2);
+
+	/* remove leaf node */
+	key->prefixlen = 24;
+	inet_pton(AF_INET, "192.168.0.0", key->data);
+	assert(bpf_map_delete_elem(map_fd, key) == 0);
+
+	key->prefixlen = 32;
+	inet_pton(AF_INET, "192.168.0.1", key->data);
+	assert(bpf_map_lookup_elem(map_fd, key, &value) == 0);
+	assert(value == 1);
+
+	/* remove leaf (and intermediary) node */
+	key->prefixlen = 24;
+	inet_pton(AF_INET, "192.168.1.0", key->data);
+	assert(bpf_map_delete_elem(map_fd, key) == 0);
+
+	key->prefixlen = 32;
+	inet_pton(AF_INET, "192.168.1.1", key->data);
+	assert(bpf_map_lookup_elem(map_fd, key, &value) == 0);
+	assert(value == 1);
+
+	/* remove root node */
+	key->prefixlen = 16;
+	inet_pton(AF_INET, "192.168.0.0", key->data);
+	assert(bpf_map_delete_elem(map_fd, key) == 0);
+
+	key->prefixlen = 32;
+	inet_pton(AF_INET, "192.168.128.1", key->data);
+	assert(bpf_map_lookup_elem(map_fd, key, &value) == 0);
+	assert(value == 3);
+
+	/* remove last node */
+	key->prefixlen = 24;
+	inet_pton(AF_INET, "192.168.128.0", key->data);
+	assert(bpf_map_delete_elem(map_fd, key) == 0);
+
+	key->prefixlen = 32;
+	inet_pton(AF_INET, "192.168.128.1", key->data);
+	assert(bpf_map_lookup_elem(map_fd, key, &value) == -1 &&
+		errno == ENOENT);
+
+	close(map_fd);
+}
+
 int main(void)
 {
 	struct rlimit limit  = { RLIM_INFINITY, RLIM_INFINITY };
@@ -354,6 +543,8 @@ int main(void)
 
 	test_lpm_ipaddr();
 
+	test_lpm_delete();
+
 	printf("test_lpm: OK\n");
 	return 0;
 }
diff --git a/tools/testing/selftests/bpf/test_maps.c b/tools/testing/selftests/bpf/test_maps.c
index 50ce52d2013d..040356ecc862 100644
--- a/tools/testing/selftests/bpf/test_maps.c
+++ b/tools/testing/selftests/bpf/test_maps.c
@@ -1043,6 +1043,51 @@ static void test_map_parallel(void)
 	assert(bpf_map_get_next_key(fd, &key, &key) == -1 && errno == ENOENT);
 }
 
+static void test_map_rdonly(void)
+{
+	int fd, key = 0, value = 0;
+
+	fd = bpf_create_map(BPF_MAP_TYPE_HASH, sizeof(key), sizeof(value),
+			    MAP_SIZE, map_flags | BPF_F_RDONLY);
+	if (fd < 0) {
+		printf("Failed to create map for read only test '%s'!\n",
+		       strerror(errno));
+		exit(1);
+	}
+
+	key = 1;
+	value = 1234;
+	/* Insert key=1 element. */
+	assert(bpf_map_update_elem(fd, &key, &value, BPF_ANY) == -1 &&
+	       errno == EPERM);
+
+	/* Check that key=2 is not found. */
+	assert(bpf_map_lookup_elem(fd, &key, &value) == -1 && errno == ENOENT);
+	assert(bpf_map_get_next_key(fd, &key, &value) == -1 && errno == ENOENT);
+}
+
+static void test_map_wronly(void)
+{
+	int fd, key = 0, value = 0;
+
+	fd = bpf_create_map(BPF_MAP_TYPE_HASH, sizeof(key), sizeof(value),
+			    MAP_SIZE, map_flags | BPF_F_WRONLY);
+	if (fd < 0) {
+		printf("Failed to create map for read only test '%s'!\n",
+		       strerror(errno));
+		exit(1);
+	}
+
+	key = 1;
+	value = 1234;
+	/* Insert key=1 element. */
+	assert(bpf_map_update_elem(fd, &key, &value, BPF_ANY) == 0);
+
+	/* Check that key=2 is not found. */
+	assert(bpf_map_lookup_elem(fd, &key, &value) == -1 && errno == EPERM);
+	assert(bpf_map_get_next_key(fd, &key, &value) == -1 && errno == EPERM);
+}
+
 static void run_all_tests(void)
 {
 	test_hashmap(0, NULL);
@@ -1060,6 +1105,9 @@ static void run_all_tests(void)
 	test_map_large();
 	test_map_parallel();
 	test_map_stress();
+
+	test_map_rdonly();
+	test_map_wronly();
 }
 
 int main(void)
diff --git a/tools/testing/selftests/bpf/test_progs.c b/tools/testing/selftests/bpf/test_progs.c
index 11ee25cea227..69427531408d 100644
--- a/tools/testing/selftests/bpf/test_progs.c
+++ b/tools/testing/selftests/bpf/test_progs.c
@@ -10,6 +10,7 @@
 #include <string.h>
 #include <assert.h>
 #include <stdlib.h>
+#include <time.h>
 
 #include <linux/types.h>
 typedef __u16 __sum16;
@@ -19,6 +20,8 @@ typedef __u16 __sum16;
 #include <linux/ip.h>
 #include <linux/ipv6.h>
 #include <linux/tcp.h>
+#include <linux/filter.h>
+#include <linux/unistd.h>
 
 #include <sys/wait.h>
 #include <sys/resource.h>
@@ -273,16 +276,26 @@ static void test_bpf_obj_id(void)
 	const int nr_iters = 2;
 	const char *file = "./test_obj_id.o";
 	const char *jit_sysctl = "/proc/sys/net/core/bpf_jit_enable";
+	const char *expected_prog_name = "test_obj_id";
+	const char *expected_map_name = "test_map_id";
+	const __u64 nsec_per_sec = 1000000000;
 
 	struct bpf_object *objs[nr_iters];
 	int prog_fds[nr_iters], map_fds[nr_iters];
 	/* +1 to test for the info_len returned by kernel */
 	struct bpf_prog_info prog_infos[nr_iters + 1];
 	struct bpf_map_info map_infos[nr_iters + 1];
+	/* Each prog only uses one map. +1 to test nr_map_ids
+	 * returned by kernel.
+	 */
+	__u32 map_ids[nr_iters + 1];
 	char jited_insns[128], xlated_insns[128], zeros[128];
 	__u32 i, next_id, info_len, nr_id_found, duration = 0;
+	struct timespec real_time_ts, boot_time_ts;
 	int sysctl_fd, jit_enabled = 0, err = 0;
 	__u64 array_value;
+	uid_t my_uid = getuid();
+	time_t now, load_time;
 
 	sysctl_fd = open(jit_sysctl, 0, O_RDONLY);
 	if (sysctl_fd != -1) {
@@ -307,6 +320,7 @@ static void test_bpf_obj_id(void)
 	/* Check bpf_obj_get_info_by_fd() */
 	bzero(zeros, sizeof(zeros));
 	for (i = 0; i < nr_iters; i++) {
+		now = time(NULL);
 		err = bpf_prog_load(file, BPF_PROG_TYPE_SOCKET_FILTER,
 				    &objs[i], &prog_fds[i]);
 		/* test_obj_id.o is a dumb prog. It should never fail
@@ -316,6 +330,38 @@ static void test_bpf_obj_id(void)
 			error_cnt++;
 		assert(!err);
 
+		/* Insert a magic value to the map */
+		map_fds[i] = bpf_find_map(__func__, objs[i], "test_map_id");
+		assert(map_fds[i] >= 0);
+		err = bpf_map_update_elem(map_fds[i], &array_key,
+					  &array_magic_value, 0);
+		assert(!err);
+
+		/* Check getting map info */
+		info_len = sizeof(struct bpf_map_info) * 2;
+		bzero(&map_infos[i], info_len);
+		err = bpf_obj_get_info_by_fd(map_fds[i], &map_infos[i],
+					     &info_len);
+		if (CHECK(err ||
+			  map_infos[i].type != BPF_MAP_TYPE_ARRAY ||
+			  map_infos[i].key_size != sizeof(__u32) ||
+			  map_infos[i].value_size != sizeof(__u64) ||
+			  map_infos[i].max_entries != 1 ||
+			  map_infos[i].map_flags != 0 ||
+			  info_len != sizeof(struct bpf_map_info) ||
+			  strcmp((char *)map_infos[i].name, expected_map_name),
+			  "get-map-info(fd)",
+			  "err %d errno %d type %d(%d) info_len %u(%lu) key_size %u value_size %u max_entries %u map_flags %X name %s(%s)\n",
+			  err, errno,
+			  map_infos[i].type, BPF_MAP_TYPE_ARRAY,
+			  info_len, sizeof(struct bpf_map_info),
+			  map_infos[i].key_size,
+			  map_infos[i].value_size,
+			  map_infos[i].max_entries,
+			  map_infos[i].map_flags,
+			  map_infos[i].name, expected_map_name))
+			goto done;
+
 		/* Check getting prog info */
 		info_len = sizeof(struct bpf_prog_info) * 2;
 		bzero(&prog_infos[i], info_len);
@@ -325,8 +371,16 @@ static void test_bpf_obj_id(void)
 		prog_infos[i].jited_prog_len = sizeof(jited_insns);
 		prog_infos[i].xlated_prog_insns = ptr_to_u64(xlated_insns);
 		prog_infos[i].xlated_prog_len = sizeof(xlated_insns);
+		prog_infos[i].map_ids = ptr_to_u64(map_ids + i);
+		prog_infos[i].nr_map_ids = 2;
+		err = clock_gettime(CLOCK_REALTIME, &real_time_ts);
+		assert(!err);
+		err = clock_gettime(CLOCK_BOOTTIME, &boot_time_ts);
+		assert(!err);
 		err = bpf_obj_get_info_by_fd(prog_fds[i], &prog_infos[i],
 					     &info_len);
+		load_time = (real_time_ts.tv_sec - boot_time_ts.tv_sec)
+			+ (prog_infos[i].load_time / nsec_per_sec);
 		if (CHECK(err ||
 			  prog_infos[i].type != BPF_PROG_TYPE_SOCKET_FILTER ||
 			  info_len != sizeof(struct bpf_prog_info) ||
@@ -334,9 +388,14 @@ static void test_bpf_obj_id(void)
 			  (jit_enabled &&
 			   !memcmp(jited_insns, zeros, sizeof(zeros))) ||
 			  !prog_infos[i].xlated_prog_len ||
-			  !memcmp(xlated_insns, zeros, sizeof(zeros)),
+			  !memcmp(xlated_insns, zeros, sizeof(zeros)) ||
+			  load_time < now - 60 || load_time > now + 60 ||
+			  prog_infos[i].created_by_uid != my_uid ||
+			  prog_infos[i].nr_map_ids != 1 ||
+			  *(int *)prog_infos[i].map_ids != map_infos[i].id ||
+			  strcmp((char *)prog_infos[i].name, expected_prog_name),
 			  "get-prog-info(fd)",
-			  "err %d errno %d i %d type %d(%d) info_len %u(%lu) jit_enabled %d jited_prog_len %u xlated_prog_len %u jited_prog %d xlated_prog %d\n",
+			  "err %d errno %d i %d type %d(%d) info_len %u(%lu) jit_enabled %d jited_prog_len %u xlated_prog_len %u jited_prog %d xlated_prog %d load_time %lu(%lu) uid %u(%u) nr_map_ids %u(%u) map_id %u(%u) name %s(%s)\n",
 			  err, errno, i,
 			  prog_infos[i].type, BPF_PROG_TYPE_SOCKET_FILTER,
 			  info_len, sizeof(struct bpf_prog_info),
@@ -344,36 +403,12 @@ static void test_bpf_obj_id(void)
 			  prog_infos[i].jited_prog_len,
 			  prog_infos[i].xlated_prog_len,
 			  !!memcmp(jited_insns, zeros, sizeof(zeros)),
-			  !!memcmp(xlated_insns, zeros, sizeof(zeros))))
-			goto done;
-
-		map_fds[i] = bpf_find_map(__func__, objs[i], "test_map_id");
-		assert(map_fds[i] >= 0);
-		err = bpf_map_update_elem(map_fds[i], &array_key,
-					  &array_magic_value, 0);
-		assert(!err);
-
-		/* Check getting map info */
-		info_len = sizeof(struct bpf_map_info) * 2;
-		bzero(&map_infos[i], info_len);
-		err = bpf_obj_get_info_by_fd(map_fds[i], &map_infos[i],
-					     &info_len);
-		if (CHECK(err ||
-			  map_infos[i].type != BPF_MAP_TYPE_ARRAY ||
-			  map_infos[i].key_size != sizeof(__u32) ||
-			  map_infos[i].value_size != sizeof(__u64) ||
-			  map_infos[i].max_entries != 1 ||
-			  map_infos[i].map_flags != 0 ||
-			  info_len != sizeof(struct bpf_map_info),
-			  "get-map-info(fd)",
-			  "err %d errno %d type %d(%d) info_len %u(%lu) key_size %u value_size %u max_entries %u map_flags %X\n",
-			  err, errno,
-			  map_infos[i].type, BPF_MAP_TYPE_ARRAY,
-			  info_len, sizeof(struct bpf_map_info),
-			  map_infos[i].key_size,
-			  map_infos[i].value_size,
-			  map_infos[i].max_entries,
-			  map_infos[i].map_flags))
+			  !!memcmp(xlated_insns, zeros, sizeof(zeros)),
+			  load_time, now,
+			  prog_infos[i].created_by_uid, my_uid,
+			  prog_infos[i].nr_map_ids, 1,
+			  *(int *)prog_infos[i].map_ids, map_infos[i].id,
+			  prog_infos[i].name, expected_prog_name))
 			goto done;
 	}
 
@@ -382,6 +417,7 @@ static void test_bpf_obj_id(void)
 	next_id = 0;
 	while (!bpf_prog_get_next_id(next_id, &next_id)) {
 		struct bpf_prog_info prog_info = {};
+		__u32 saved_map_id;
 		int prog_fd;
 
 		info_len = sizeof(prog_info);
@@ -404,16 +440,33 @@ static void test_bpf_obj_id(void)
 
 		nr_id_found++;
 
+		/* Negative test:
+		 * prog_info.nr_map_ids = 1
+		 * prog_info.map_ids = NULL
+		 */
+		prog_info.nr_map_ids = 1;
+		err = bpf_obj_get_info_by_fd(prog_fd, &prog_info, &info_len);
+		if (CHECK(!err || errno != EFAULT,
+			  "get-prog-fd-bad-nr-map-ids", "err %d errno %d(%d)",
+			  err, errno, EFAULT))
+			break;
+		bzero(&prog_info, sizeof(prog_info));
+		info_len = sizeof(prog_info);
+
+		saved_map_id = *(int *)(prog_infos[i].map_ids);
+		prog_info.map_ids = prog_infos[i].map_ids;
+		prog_info.nr_map_ids = 2;
 		err = bpf_obj_get_info_by_fd(prog_fd, &prog_info, &info_len);
 		prog_infos[i].jited_prog_insns = 0;
 		prog_infos[i].xlated_prog_insns = 0;
 		CHECK(err || info_len != sizeof(struct bpf_prog_info) ||
-		      memcmp(&prog_info, &prog_infos[i], info_len),
+		      memcmp(&prog_info, &prog_infos[i], info_len) ||
+		      *(int *)prog_info.map_ids != saved_map_id,
 		      "get-prog-info(next_id->fd)",
-		      "err %d errno %d info_len %u(%lu) memcmp %d\n",
+		      "err %d errno %d info_len %u(%lu) memcmp %d map_id %u(%u)\n",
 		      err, errno, info_len, sizeof(struct bpf_prog_info),
-		      memcmp(&prog_info, &prog_infos[i], info_len));
-
+		      memcmp(&prog_info, &prog_infos[i], info_len),
+		      *(int *)prog_info.map_ids, saved_map_id);
 		close(prog_fd);
 	}
 	CHECK(nr_id_found != nr_iters,
@@ -495,6 +548,75 @@ static void test_pkt_md_access(void)
 	bpf_object__close(obj);
 }
 
+static void test_obj_name(void)
+{
+	struct {
+		const char *name;
+		int success;
+		int expected_errno;
+	} tests[] = {
+		{ "", 1, 0 },
+		{ "_123456789ABCDE", 1, 0 },
+		{ "_123456789ABCDEF", 0, EINVAL },
+		{ "_123456789ABCD\n", 0, EINVAL },
+	};
+	struct bpf_insn prog[] = {
+		BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 0),
+		BPF_EXIT_INSN(),
+	};
+	__u32 duration = 0;
+	int i;
+
+	for (i = 0; i < sizeof(tests) / sizeof(tests[0]); i++) {
+		size_t name_len = strlen(tests[i].name) + 1;
+		union bpf_attr attr;
+		size_t ncopy;
+		int fd;
+
+		/* test different attr.prog_name during BPF_PROG_LOAD */
+		ncopy = name_len < sizeof(attr.prog_name) ?
+			name_len : sizeof(attr.prog_name);
+		bzero(&attr, sizeof(attr));
+		attr.prog_type = BPF_PROG_TYPE_SCHED_CLS;
+		attr.insn_cnt = 2;
+		attr.insns = ptr_to_u64(prog);
+		attr.license = ptr_to_u64("");
+		memcpy(attr.prog_name, tests[i].name, ncopy);
+
+		fd = syscall(__NR_bpf, BPF_PROG_LOAD, &attr, sizeof(attr));
+		CHECK((tests[i].success && fd < 0) ||
+		      (!tests[i].success && fd != -1) ||
+		      (!tests[i].success && errno != tests[i].expected_errno),
+		      "check-bpf-prog-name",
+		      "fd %d(%d) errno %d(%d)\n",
+		       fd, tests[i].success, errno, tests[i].expected_errno);
+
+		if (fd != -1)
+			close(fd);
+
+		/* test different attr.map_name during BPF_MAP_CREATE */
+		ncopy = name_len < sizeof(attr.map_name) ?
+			name_len : sizeof(attr.map_name);
+		bzero(&attr, sizeof(attr));
+		attr.map_type = BPF_MAP_TYPE_ARRAY;
+		attr.key_size = 4;
+		attr.value_size = 4;
+		attr.max_entries = 1;
+		attr.map_flags = 0;
+		memcpy(attr.map_name, tests[i].name, ncopy);
+		fd = syscall(__NR_bpf, BPF_MAP_CREATE, &attr, sizeof(attr));
+		CHECK((tests[i].success && fd < 0) ||
+		      (!tests[i].success && fd != -1) ||
+		      (!tests[i].success && errno != tests[i].expected_errno),
+		      "check-bpf-map-name",
+		      "fd %d(%d) errno %d(%d)\n",
+		      fd, tests[i].success, errno, tests[i].expected_errno);
+
+		if (fd != -1)
+			close(fd);
+	}
+}
+
 int main(void)
 {
 	struct rlimit rinf = { RLIM_INFINITY, RLIM_INFINITY };
@@ -507,6 +629,7 @@ int main(void)
 	test_tcp_estats();
 	test_bpf_obj_id();
 	test_pkt_md_access();
+	test_obj_name();
 
 	printf("Summary: %d PASSED, %d FAILED\n", pass_cnt, error_cnt);
 	return error_cnt ? EXIT_FAILURE : EXIT_SUCCESS;
diff --git a/tools/testing/selftests/bpf/test_verifier.c b/tools/testing/selftests/bpf/test_verifier.c
index 64ae21f64489..bf092b83e453 100644
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -3579,7 +3579,7 @@ static struct bpf_test tests[] = {
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 	},
 	{
-		"helper access to packet: test19, cls helper fail range zero",
+		"helper access to packet: test19, cls helper range zero",
 		.insns = {
 			BPF_LDX_MEM(BPF_W, BPF_REG_6, BPF_REG_1,
 				    offsetof(struct __sk_buff, data)),
@@ -3599,8 +3599,7 @@ static struct bpf_test tests[] = {
 			BPF_MOV64_IMM(BPF_REG_0, 0),
 			BPF_EXIT_INSN(),
 		},
-		.result = REJECT,
-		.errstr = "invalid access to packet",
+		.result = ACCEPT,
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 	},
 	{
@@ -4379,10 +4378,10 @@ static struct bpf_test tests[] = {
 			BPF_LD_MAP_FD(BPF_REG_1, 0),
 			BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem),
 			BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 4),
-			BPF_MOV64_REG(BPF_REG_1, BPF_REG_0),
-			BPF_MOV64_IMM(BPF_REG_2, 0),
+			BPF_MOV64_IMM(BPF_REG_1, 0),
+			BPF_MOV64_REG(BPF_REG_2, BPF_REG_0),
 			BPF_MOV64_IMM(BPF_REG_3, 0),
-			BPF_EMIT_CALL(BPF_FUNC_probe_read),
+			BPF_EMIT_CALL(BPF_FUNC_probe_write_user),
 			BPF_EXIT_INSN(),
 		},
 		.fixup_map2 = { 3 },
@@ -4486,9 +4485,10 @@ static struct bpf_test tests[] = {
 			BPF_MOV64_REG(BPF_REG_1, BPF_REG_0),
 			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1,
 				offsetof(struct test_val, foo)),
-			BPF_MOV64_IMM(BPF_REG_2, 0),
+			BPF_MOV64_REG(BPF_REG_2, BPF_REG_1),
+			BPF_MOV64_IMM(BPF_REG_1, 0),
 			BPF_MOV64_IMM(BPF_REG_3, 0),
-			BPF_EMIT_CALL(BPF_FUNC_probe_read),
+			BPF_EMIT_CALL(BPF_FUNC_probe_write_user),
 			BPF_EXIT_INSN(),
 		},
 		.fixup_map2 = { 3 },
@@ -4622,13 +4622,14 @@ static struct bpf_test tests[] = {
 			BPF_MOV64_REG(BPF_REG_1, BPF_REG_0),
 			BPF_MOV64_IMM(BPF_REG_3, 0),
 			BPF_ALU64_REG(BPF_ADD, BPF_REG_1, BPF_REG_3),
-			BPF_MOV64_IMM(BPF_REG_2, 0),
+			BPF_MOV64_REG(BPF_REG_2, BPF_REG_1),
+			BPF_MOV64_IMM(BPF_REG_1, 0),
 			BPF_MOV64_IMM(BPF_REG_3, 0),
-			BPF_EMIT_CALL(BPF_FUNC_probe_read),
+			BPF_EMIT_CALL(BPF_FUNC_probe_write_user),
 			BPF_EXIT_INSN(),
 		},
 		.fixup_map2 = { 3 },
-		.errstr = "R1 min value is outside of the array range",
+		.errstr = "R2 min value is outside of the array range",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_TRACEPOINT,
 	},
@@ -4765,13 +4766,14 @@ static struct bpf_test tests[] = {
 			BPF_JMP_IMM(BPF_JGT, BPF_REG_3,
 				offsetof(struct test_val, foo), 4),
 			BPF_ALU64_REG(BPF_ADD, BPF_REG_1, BPF_REG_3),
-			BPF_MOV64_IMM(BPF_REG_2, 0),
+			BPF_MOV64_REG(BPF_REG_2, BPF_REG_1),
+			BPF_MOV64_IMM(BPF_REG_1, 0),
 			BPF_MOV64_IMM(BPF_REG_3, 0),
-			BPF_EMIT_CALL(BPF_FUNC_probe_read),
+			BPF_EMIT_CALL(BPF_FUNC_probe_write_user),
 			BPF_EXIT_INSN(),
 		},
 		.fixup_map2 = { 3 },
-		.errstr = "R1 min value is outside of the array range",
+		.errstr = "R2 min value is outside of the array range",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_TRACEPOINT,
 	},
@@ -5350,7 +5352,7 @@ static struct bpf_test tests[] = {
 			BPF_EMIT_CALL(BPF_FUNC_probe_read),
 			BPF_EXIT_INSN(),
 		},
-		.errstr = "invalid stack type R1 off=-64 access_size=0",
+		.errstr = "invalid indirect read from stack off -64+0 size 64",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_TRACEPOINT,
 	},
@@ -5505,7 +5507,7 @@ static struct bpf_test tests[] = {
 			BPF_MOV64_IMM(BPF_REG_0, 0),
 			BPF_EXIT_INSN(),
 		},
-		.errstr = "invalid stack type R1 off=-64 access_size=0",
+		.errstr = "invalid indirect read from stack off -64+0 size 64",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_TRACEPOINT,
 	},
@@ -5668,7 +5670,7 @@ static struct bpf_test tests[] = {
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 	},
 	{
-		"helper access to variable memory: size = 0 not allowed on != NULL",
+		"helper access to variable memory: size = 0 allowed on != NULL stack pointer",
 		.insns = {
 			BPF_MOV64_REG(BPF_REG_1, BPF_REG_10),
 			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, -8),
@@ -5681,8 +5683,99 @@ static struct bpf_test tests[] = {
 			BPF_EMIT_CALL(BPF_FUNC_csum_diff),
 			BPF_EXIT_INSN(),
 		},
-		.errstr = "invalid stack type R1 off=-8 access_size=0",
-		.result = REJECT,
+		.result = ACCEPT,
+		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
+	},
+	{
+		"helper access to variable memory: size = 0 allowed on != NULL map pointer",
+		.insns = {
+			BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+			BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+			BPF_LD_MAP_FD(BPF_REG_1, 0),
+			BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+				     BPF_FUNC_map_lookup_elem),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 6),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_0),
+			BPF_MOV64_IMM(BPF_REG_2, 0),
+			BPF_MOV64_IMM(BPF_REG_3, 0),
+			BPF_MOV64_IMM(BPF_REG_4, 0),
+			BPF_MOV64_IMM(BPF_REG_5, 0),
+			BPF_EMIT_CALL(BPF_FUNC_csum_diff),
+			BPF_EXIT_INSN(),
+		},
+		.fixup_map1 = { 3 },
+		.result = ACCEPT,
+		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
+	},
+	{
+		"helper access to variable memory: size possible = 0 allowed on != NULL stack pointer",
+		.insns = {
+			BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+			BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+			BPF_LD_MAP_FD(BPF_REG_1, 0),
+			BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+				     BPF_FUNC_map_lookup_elem),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 9),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_2, BPF_REG_0, 0),
+			BPF_JMP_IMM(BPF_JGT, BPF_REG_2, 8, 7),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_10),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, -8),
+			BPF_STX_MEM(BPF_DW, BPF_REG_1, BPF_REG_2, 0),
+			BPF_MOV64_IMM(BPF_REG_3, 0),
+			BPF_MOV64_IMM(BPF_REG_4, 0),
+			BPF_MOV64_IMM(BPF_REG_5, 0),
+			BPF_EMIT_CALL(BPF_FUNC_csum_diff),
+			BPF_EXIT_INSN(),
+		},
+		.fixup_map1 = { 3 },
+		.result = ACCEPT,
+		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
+	},
+	{
+		"helper access to variable memory: size possible = 0 allowed on != NULL map pointer",
+		.insns = {
+			BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+			BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+			BPF_LD_MAP_FD(BPF_REG_1, 0),
+			BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+				     BPF_FUNC_map_lookup_elem),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 7),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_0),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_2, BPF_REG_0, 0),
+			BPF_JMP_IMM(BPF_JGT, BPF_REG_2, 8, 4),
+			BPF_MOV64_IMM(BPF_REG_3, 0),
+			BPF_MOV64_IMM(BPF_REG_4, 0),
+			BPF_MOV64_IMM(BPF_REG_5, 0),
+			BPF_EMIT_CALL(BPF_FUNC_csum_diff),
+			BPF_EXIT_INSN(),
+		},
+		.fixup_map1 = { 3 },
+		.result = ACCEPT,
+		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
+	},
+	{
+		"helper access to variable memory: size possible = 0 allowed on != NULL packet pointer",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_6, BPF_REG_1,
+				    offsetof(struct __sk_buff, data)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct __sk_buff, data_end)),
+			BPF_MOV64_REG(BPF_REG_0, BPF_REG_6),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 8),
+			BPF_JMP_REG(BPF_JGT, BPF_REG_0, BPF_REG_3, 7),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_6),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_2, BPF_REG_6, 0),
+			BPF_JMP_IMM(BPF_JGT, BPF_REG_2, 8, 4),
+			BPF_MOV64_IMM(BPF_REG_3, 0),
+			BPF_MOV64_IMM(BPF_REG_4, 0),
+			BPF_MOV64_IMM(BPF_REG_5, 0),
+			BPF_EMIT_CALL(BPF_FUNC_csum_diff),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 	},
 	{
@@ -6658,6 +6751,253 @@ static struct bpf_test tests[] = {
 		.result = REJECT,
 	},
 	{
+		"meta access, test1",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_0, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 8),
+			BPF_JMP_REG(BPF_JGT, BPF_REG_0, BPF_REG_3, 1),
+			BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_2, 0),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"meta access, test2",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_0, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_SUB, BPF_REG_0, 8),
+			BPF_MOV64_REG(BPF_REG_4, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, 8),
+			BPF_JMP_REG(BPF_JGT, BPF_REG_4, BPF_REG_3, 1),
+			BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_0, 0),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = REJECT,
+		.errstr = "invalid access to packet, off=-8",
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"meta access, test3",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data_end)),
+			BPF_MOV64_REG(BPF_REG_0, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 8),
+			BPF_JMP_REG(BPF_JGT, BPF_REG_0, BPF_REG_3, 1),
+			BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_2, 0),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = REJECT,
+		.errstr = "invalid access to packet",
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"meta access, test4",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data_end)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_4, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_0, BPF_REG_4),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 8),
+			BPF_JMP_REG(BPF_JGT, BPF_REG_0, BPF_REG_3, 1),
+			BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_2, 0),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = REJECT,
+		.errstr = "invalid access to packet",
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"meta access, test5",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_4, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_0, BPF_REG_3),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 8),
+			BPF_JMP_REG(BPF_JGT, BPF_REG_0, BPF_REG_4, 3),
+			BPF_MOV64_IMM(BPF_REG_2, -8),
+			BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+				     BPF_FUNC_xdp_adjust_meta),
+			BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_3, 0),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = REJECT,
+		.errstr = "R3 !read_ok",
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"meta access, test6",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_0, BPF_REG_3),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 8),
+			BPF_MOV64_REG(BPF_REG_4, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, 8),
+			BPF_JMP_REG(BPF_JGT, BPF_REG_4, BPF_REG_0, 1),
+			BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_2, 0),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = REJECT,
+		.errstr = "invalid access to packet",
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"meta access, test7",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_0, BPF_REG_3),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 8),
+			BPF_MOV64_REG(BPF_REG_4, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, 8),
+			BPF_JMP_REG(BPF_JGT, BPF_REG_4, BPF_REG_3, 1),
+			BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_2, 0),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"meta access, test8",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_4, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, 0xFFFF),
+			BPF_JMP_REG(BPF_JGT, BPF_REG_4, BPF_REG_3, 1),
+			BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_2, 0),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"meta access, test9",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_4, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, 0xFFFF),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, 1),
+			BPF_JMP_REG(BPF_JGT, BPF_REG_4, BPF_REG_3, 1),
+			BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_2, 0),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = REJECT,
+		.errstr = "invalid access to packet",
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"meta access, test10",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_4, BPF_REG_1,
+				    offsetof(struct xdp_md, data_end)),
+			BPF_MOV64_IMM(BPF_REG_5, 42),
+			BPF_MOV64_IMM(BPF_REG_6, 24),
+			BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_5, -8),
+			BPF_STX_XADD(BPF_DW, BPF_REG_10, BPF_REG_6, -8),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_5, BPF_REG_10, -8),
+			BPF_JMP_IMM(BPF_JGT, BPF_REG_5, 100, 6),
+			BPF_ALU64_REG(BPF_ADD, BPF_REG_3, BPF_REG_5),
+			BPF_MOV64_REG(BPF_REG_5, BPF_REG_3),
+			BPF_MOV64_REG(BPF_REG_6, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_6, 8),
+			BPF_JMP_REG(BPF_JGT, BPF_REG_6, BPF_REG_5, 1),
+			BPF_LDX_MEM(BPF_B, BPF_REG_2, BPF_REG_2, 0),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = REJECT,
+		.errstr = "invalid access to packet",
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"meta access, test11",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_IMM(BPF_REG_5, 42),
+			BPF_MOV64_IMM(BPF_REG_6, 24),
+			BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_5, -8),
+			BPF_STX_XADD(BPF_DW, BPF_REG_10, BPF_REG_6, -8),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_5, BPF_REG_10, -8),
+			BPF_JMP_IMM(BPF_JGT, BPF_REG_5, 100, 6),
+			BPF_ALU64_REG(BPF_ADD, BPF_REG_2, BPF_REG_5),
+			BPF_MOV64_REG(BPF_REG_5, BPF_REG_2),
+			BPF_MOV64_REG(BPF_REG_6, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_6, 8),
+			BPF_JMP_REG(BPF_JGT, BPF_REG_6, BPF_REG_3, 1),
+			BPF_LDX_MEM(BPF_B, BPF_REG_5, BPF_REG_5, 0),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"meta access, test12",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_4, BPF_REG_1,
+				    offsetof(struct xdp_md, data_end)),
+			BPF_MOV64_REG(BPF_REG_5, BPF_REG_3),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_5, 16),
+			BPF_JMP_REG(BPF_JGT, BPF_REG_5, BPF_REG_4, 5),
+			BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_3, 0),
+			BPF_MOV64_REG(BPF_REG_5, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_5, 16),
+			BPF_JMP_REG(BPF_JGT, BPF_REG_5, BPF_REG_3, 1),
+			BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_2, 0),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
 		"arithmetic ops make PTR_TO_CTX unusable",
 		.insns = {
 			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1,
@@ -7151,6 +7491,520 @@ static struct bpf_test tests[] = {
 		.prog_type = BPF_PROG_TYPE_XDP,
 		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
+	{
+		"XDP pkt read, pkt_meta' > pkt_data, good access",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JGT, BPF_REG_1, BPF_REG_3, 1),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"XDP pkt read, pkt_meta' > pkt_data, bad access 1",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JGT, BPF_REG_1, BPF_REG_3, 1),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -4),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R1 offset is outside of the packet",
+		.result = REJECT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+	},
+	{
+		"XDP pkt read, pkt_meta' > pkt_data, bad access 2",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JGT, BPF_REG_1, BPF_REG_3, 0),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R1 offset is outside of the packet",
+		.result = REJECT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"XDP pkt read, pkt_data > pkt_meta', good access",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JGT, BPF_REG_3, BPF_REG_1, 1),
+			BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+			BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_1, -5),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+	},
+	{
+		"XDP pkt read, pkt_data > pkt_meta', bad access 1",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JGT, BPF_REG_3, BPF_REG_1, 1),
+			BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R1 offset is outside of the packet",
+		.result = REJECT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"XDP pkt read, pkt_data > pkt_meta', bad access 2",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JGT, BPF_REG_3, BPF_REG_1, 1),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R1 offset is outside of the packet",
+		.result = REJECT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"XDP pkt read, pkt_meta' < pkt_data, good access",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JLT, BPF_REG_1, BPF_REG_3, 1),
+			BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+			BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_1, -5),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+	},
+	{
+		"XDP pkt read, pkt_meta' < pkt_data, bad access 1",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JLT, BPF_REG_1, BPF_REG_3, 1),
+			BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R1 offset is outside of the packet",
+		.result = REJECT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"XDP pkt read, pkt_meta' < pkt_data, bad access 2",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JLT, BPF_REG_1, BPF_REG_3, 1),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R1 offset is outside of the packet",
+		.result = REJECT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"XDP pkt read, pkt_data < pkt_meta', good access",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JLT, BPF_REG_3, BPF_REG_1, 1),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"XDP pkt read, pkt_data < pkt_meta', bad access 1",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JLT, BPF_REG_3, BPF_REG_1, 1),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -4),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R1 offset is outside of the packet",
+		.result = REJECT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+	},
+	{
+		"XDP pkt read, pkt_data < pkt_meta', bad access 2",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JLT, BPF_REG_3, BPF_REG_1, 0),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R1 offset is outside of the packet",
+		.result = REJECT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"XDP pkt read, pkt_meta' >= pkt_data, good access",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JGE, BPF_REG_1, BPF_REG_3, 1),
+			BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_1, -5),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+	},
+	{
+		"XDP pkt read, pkt_meta' >= pkt_data, bad access 1",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JGE, BPF_REG_1, BPF_REG_3, 1),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R1 offset is outside of the packet",
+		.result = REJECT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"XDP pkt read, pkt_meta' >= pkt_data, bad access 2",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JGE, BPF_REG_1, BPF_REG_3, 0),
+			BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_1, -5),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R1 offset is outside of the packet",
+		.result = REJECT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+	},
+	{
+		"XDP pkt read, pkt_data >= pkt_meta', good access",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JGE, BPF_REG_3, BPF_REG_1, 1),
+			BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"XDP pkt read, pkt_data >= pkt_meta', bad access 1",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JGE, BPF_REG_3, BPF_REG_1, 1),
+			BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -4),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R1 offset is outside of the packet",
+		.result = REJECT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+	},
+	{
+		"XDP pkt read, pkt_data >= pkt_meta', bad access 2",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JGE, BPF_REG_3, BPF_REG_1, 1),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R1 offset is outside of the packet",
+		.result = REJECT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"XDP pkt read, pkt_meta' <= pkt_data, good access",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JLE, BPF_REG_1, BPF_REG_3, 1),
+			BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"XDP pkt read, pkt_meta' <= pkt_data, bad access 1",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JLE, BPF_REG_1, BPF_REG_3, 1),
+			BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -4),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R1 offset is outside of the packet",
+		.result = REJECT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+	},
+	{
+		"XDP pkt read, pkt_meta' <= pkt_data, bad access 2",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JLE, BPF_REG_1, BPF_REG_3, 1),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R1 offset is outside of the packet",
+		.result = REJECT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"XDP pkt read, pkt_data <= pkt_meta', good access",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JLE, BPF_REG_3, BPF_REG_1, 1),
+			BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_1, -5),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+	},
+	{
+		"XDP pkt read, pkt_data <= pkt_meta', bad access 1",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JLE, BPF_REG_3, BPF_REG_1, 1),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R1 offset is outside of the packet",
+		.result = REJECT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+	},
+	{
+		"XDP pkt read, pkt_data <= pkt_meta', bad access 2",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+				    offsetof(struct xdp_md, data_meta)),
+			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+				    offsetof(struct xdp_md, data)),
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_JMP_REG(BPF_JLE, BPF_REG_3, BPF_REG_1, 0),
+			BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_1, -5),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R1 offset is outside of the packet",
+		.result = REJECT,
+		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+	},
+	{
+		"bpf_exit with invalid return code. test1",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_1, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R0 has value (0x0; 0xffffffff)",
+		.result = REJECT,
+		.prog_type = BPF_PROG_TYPE_CGROUP_SOCK,
+	},
+	{
+		"bpf_exit with invalid return code. test2",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_1, 0),
+			BPF_ALU64_IMM(BPF_AND, BPF_REG_0, 1),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
+		.prog_type = BPF_PROG_TYPE_CGROUP_SOCK,
+	},
+	{
+		"bpf_exit with invalid return code. test3",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_1, 0),
+			BPF_ALU64_IMM(BPF_AND, BPF_REG_0, 3),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R0 has value (0x0; 0x3)",
+		.result = REJECT,
+		.prog_type = BPF_PROG_TYPE_CGROUP_SOCK,
+	},
+	{
+		"bpf_exit with invalid return code. test4",
+		.insns = {
+			BPF_MOV64_IMM(BPF_REG_0, 1),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
+		.prog_type = BPF_PROG_TYPE_CGROUP_SOCK,
+	},
+	{
+		"bpf_exit with invalid return code. test5",
+		.insns = {
+			BPF_MOV64_IMM(BPF_REG_0, 2),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R0 has value (0x2; 0x0)",
+		.result = REJECT,
+		.prog_type = BPF_PROG_TYPE_CGROUP_SOCK,
+	},
+	{
+		"bpf_exit with invalid return code. test6",
+		.insns = {
+			BPF_MOV64_REG(BPF_REG_0, BPF_REG_1),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R0 is not a known value (ctx)",
+		.result = REJECT,
+		.prog_type = BPF_PROG_TYPE_CGROUP_SOCK,
+	},
+	{
+		"bpf_exit with invalid return code. test7",
+		.insns = {
+			BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_1, 0),
+			BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, 4),
+			BPF_ALU64_REG(BPF_MUL, BPF_REG_0, BPF_REG_2),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R0 has unknown scalar value",
+		.result = REJECT,
+		.prog_type = BPF_PROG_TYPE_CGROUP_SOCK,
+	},
 };
 
 static int probe_filter_length(const struct bpf_insn *fp)
@@ -7198,7 +8052,7 @@ static int create_map_in_map(void)
 		return inner_map_fd;
 	}
 
-	outer_map_fd = bpf_create_map_in_map(BPF_MAP_TYPE_ARRAY_OF_MAPS,
+	outer_map_fd = bpf_create_map_in_map(BPF_MAP_TYPE_ARRAY_OF_MAPS, NULL,
 					     sizeof(int), inner_map_fd, 1, 0);
 	if (outer_map_fd < 0)
 		printf("Failed to create array of maps '%s'!\n",
diff --git a/tools/testing/selftests/bpf/test_verifier_log.c b/tools/testing/selftests/bpf/test_verifier_log.c
new file mode 100644
index 000000000000..3cc0b561489e
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_verifier_log.c
@@ -0,0 +1,171 @@
+#include <errno.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+
+#include <linux/bpf.h>
+#include <linux/filter.h>
+#include <linux/unistd.h>
+
+#include <bpf/bpf.h>
+
+#define LOG_SIZE (1 << 20)
+
+#define err(str...)	printf("ERROR: " str)
+
+static const struct bpf_insn code_sample[] = {
+	/* We need a few instructions to pass the min log length */
+	BPF_MOV64_IMM(BPF_REG_0, 0),
+	BPF_MOV64_IMM(BPF_REG_0, 0),
+	BPF_MOV64_IMM(BPF_REG_0, 0),
+	BPF_MOV64_IMM(BPF_REG_0, 0),
+	BPF_MOV64_IMM(BPF_REG_0, 0),
+	BPF_MOV64_IMM(BPF_REG_0, 0),
+	BPF_MOV64_IMM(BPF_REG_0, 0),
+	BPF_MOV64_IMM(BPF_REG_0, 0),
+	BPF_MOV64_IMM(BPF_REG_0, 0),
+	BPF_MOV64_IMM(BPF_REG_0, 0),
+	BPF_MOV64_IMM(BPF_REG_0, 0),
+	BPF_MOV64_IMM(BPF_REG_0, 0),
+	BPF_MOV64_IMM(BPF_REG_0, 0),
+	BPF_MOV64_IMM(BPF_REG_0, 0),
+	BPF_MOV64_IMM(BPF_REG_0, 0),
+	BPF_MOV64_IMM(BPF_REG_0, 0),
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+		     BPF_FUNC_map_lookup_elem),
+	BPF_EXIT_INSN(),
+};
+
+static inline __u64 ptr_to_u64(const void *ptr)
+{
+	return (__u64) (unsigned long) ptr;
+}
+
+static int load(char *log, size_t log_len, int log_level)
+{
+	union bpf_attr attr;
+
+	bzero(&attr, sizeof(attr));
+	attr.prog_type = BPF_PROG_TYPE_SOCKET_FILTER;
+	attr.insn_cnt = (__u32)(sizeof(code_sample) / sizeof(struct bpf_insn));
+	attr.insns = ptr_to_u64(code_sample);
+	attr.license = ptr_to_u64("GPL");
+	attr.log_buf = ptr_to_u64(log);
+	attr.log_size = log_len;
+	attr.log_level = log_level;
+
+	return syscall(__NR_bpf, BPF_PROG_LOAD, &attr, sizeof(attr));
+}
+
+static void check_ret(int ret, int exp_errno)
+{
+	if (ret > 0) {
+		close(ret);
+		err("broken sample loaded successfully!?\n");
+		exit(1);
+	}
+
+	if (!ret || errno != exp_errno) {
+		err("Program load returned: ret:%d/errno:%d, expected ret:%d/errno:%d\n",
+		    ret, errno, -1, exp_errno);
+		exit(1);
+	}
+}
+
+static void check_ones(const char *buf, size_t len, const char *msg)
+{
+	while (len--)
+		if (buf[len] != 1) {
+			err("%s", msg);
+			exit(1);
+		}
+}
+
+static void test_log_good(char *log, size_t buf_len, size_t log_len,
+			  size_t exp_len, int exp_errno, const char *full_log)
+{
+	size_t len;
+	int ret;
+
+	memset(log, 1, buf_len);
+
+	ret = load(log, log_len, 1);
+	check_ret(ret, exp_errno);
+
+	len = strnlen(log, buf_len);
+	if (len == buf_len) {
+		err("verifier did not NULL terminate the log\n");
+		exit(1);
+	}
+	if (exp_len && len != exp_len) {
+		err("incorrect log length expected:%zd have:%zd\n",
+		    exp_len, len);
+		exit(1);
+	}
+
+	if (strchr(log, 1)) {
+		err("verifier leaked a byte through\n");
+		exit(1);
+	}
+
+	check_ones(log + len + 1, buf_len - len - 1,
+		   "verifier wrote bytes past NULL termination\n");
+
+	if (memcmp(full_log, log, LOG_SIZE)) {
+		err("log did not match expected output\n");
+		exit(1);
+	}
+}
+
+static void test_log_bad(char *log, size_t log_len, int log_level)
+{
+	int ret;
+
+	ret = load(log, log_len, log_level);
+	check_ret(ret, EINVAL);
+	if (log)
+		check_ones(log, LOG_SIZE,
+			   "verifier touched log with bad parameters\n");
+}
+
+int main(int argc, char **argv)
+{
+	char full_log[LOG_SIZE];
+	char log[LOG_SIZE];
+	size_t want_len;
+	int i;
+
+	memset(log, 1, LOG_SIZE);
+
+	/* Test incorrect attr */
+	printf("Test log_level 0...\n");
+	test_log_bad(log, LOG_SIZE, 0);
+
+	printf("Test log_size < 128...\n");
+	test_log_bad(log, 15, 1);
+
+	printf("Test log_buff = NULL...\n");
+	test_log_bad(NULL, LOG_SIZE, 1);
+
+	/* Test with log big enough */
+	printf("Test oversized buffer...\n");
+	test_log_good(full_log, LOG_SIZE, LOG_SIZE, 0, EACCES, full_log);
+
+	want_len = strlen(full_log);
+
+	printf("Test exact buffer...\n");
+	test_log_good(log, LOG_SIZE, want_len + 2, want_len, EACCES, full_log);
+
+	printf("Test undersized buffers...\n");
+	for (i = 0; i < 64; i++) {
+		full_log[want_len - i + 1] = 1;
+		full_log[want_len - i] = 0;
+
+		test_log_good(log, LOG_SIZE, want_len + 1 - i, want_len - i,
+			      ENOSPC, full_log);
+	}
+
+	printf("test_verifier_log: OK\n");
+	return 0;
+}
diff --git a/tools/testing/selftests/bpf/test_xdp_meta.c b/tools/testing/selftests/bpf/test_xdp_meta.c
new file mode 100644
index 000000000000..8d0182650653
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_xdp_meta.c
@@ -0,0 +1,53 @@
+#include <linux/bpf.h>
+#include <linux/if_ether.h>
+#include <linux/pkt_cls.h>
+
+#include "bpf_helpers.h"
+
+#define __round_mask(x, y) ((__typeof__(x))((y) - 1))
+#define round_up(x, y) ((((x) - 1) | __round_mask(x, y)) + 1)
+#define ctx_ptr(ctx, mem) (void *)(unsigned long)ctx->mem
+
+SEC("t")
+int ing_cls(struct __sk_buff *ctx)
+{
+	__u8 *data, *data_meta, *data_end;
+	__u32 diff = 0;
+
+	data_meta = ctx_ptr(ctx, data_meta);
+	data_end  = ctx_ptr(ctx, data_end);
+	data      = ctx_ptr(ctx, data);
+
+	if (data + ETH_ALEN > data_end ||
+	    data_meta + round_up(ETH_ALEN, 4) > data)
+		return TC_ACT_SHOT;
+
+	diff |= ((__u32 *)data_meta)[0] ^ ((__u32 *)data)[0];
+	diff |= ((__u16 *)data_meta)[2] ^ ((__u16 *)data)[2];
+
+	return diff ? TC_ACT_SHOT : TC_ACT_OK;
+}
+
+SEC("x")
+int ing_xdp(struct xdp_md *ctx)
+{
+	__u8 *data, *data_meta, *data_end;
+	int ret;
+
+	ret = bpf_xdp_adjust_meta(ctx, -round_up(ETH_ALEN, 4));
+	if (ret < 0)
+		return XDP_DROP;
+
+	data_meta = ctx_ptr(ctx, data_meta);
+	data_end  = ctx_ptr(ctx, data_end);
+	data      = ctx_ptr(ctx, data);
+
+	if (data + ETH_ALEN > data_end ||
+	    data_meta + round_up(ETH_ALEN, 4) > data)
+		return XDP_DROP;
+
+	__builtin_memcpy(data_meta, data, ETH_ALEN);
+	return XDP_PASS;
+}
+
+char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/test_xdp_meta.sh b/tools/testing/selftests/bpf/test_xdp_meta.sh
new file mode 100755
index 000000000000..307aa856cee3
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_xdp_meta.sh
@@ -0,0 +1,51 @@
+#!/bin/sh
+
+cleanup()
+{
+	if [ "$?" = "0" ]; then
+		echo "selftests: test_xdp_meta [PASS]";
+	else
+		echo "selftests: test_xdp_meta [FAILED]";
+	fi
+
+	set +e
+	ip netns del ns1 2> /dev/null
+	ip netns del ns2 2> /dev/null
+}
+
+ip link set dev lo xdp off 2>/dev/null > /dev/null
+if [ $? -ne 0 ];then
+	echo "selftests: [SKIP] Could not run test without the ip xdp support"
+	exit 0
+fi
+set -e
+
+ip netns add ns1
+ip netns add ns2
+
+trap cleanup 0 2 3 6 9
+
+ip link add veth1 type veth peer name veth2
+
+ip link set veth1 netns ns1
+ip link set veth2 netns ns2
+
+ip netns exec ns1 ip addr add 10.1.1.11/24 dev veth1
+ip netns exec ns2 ip addr add 10.1.1.22/24 dev veth2
+
+ip netns exec ns1 tc qdisc add dev veth1 clsact
+ip netns exec ns2 tc qdisc add dev veth2 clsact
+
+ip netns exec ns1 tc filter add dev veth1 ingress bpf da obj test_xdp_meta.o sec t
+ip netns exec ns2 tc filter add dev veth2 ingress bpf da obj test_xdp_meta.o sec t
+
+ip netns exec ns1 ip link set dev veth1 xdp obj test_xdp_meta.o sec x
+ip netns exec ns2 ip link set dev veth2 xdp obj test_xdp_meta.o sec x
+
+ip netns exec ns1 ip link set dev veth1 up
+ip netns exec ns2 ip link set dev veth2 up
+
+ip netns exec ns1 ping -c 1 10.1.1.22
+ip netns exec ns2 ping -c 1 10.1.1.11
+
+exit 0
diff --git a/tools/testing/selftests/net/rtnetlink.sh b/tools/testing/selftests/net/rtnetlink.sh
index 57b5ff576240..5215493166c9 100755
--- a/tools/testing/selftests/net/rtnetlink.sh
+++ b/tools/testing/selftests/net/rtnetlink.sh
@@ -15,6 +15,14 @@ check_err()
 	fi
 }
 
+# same but inverted -- used when command must fail for test to pass
+check_fail()
+{
+	if [ $1 -eq 0 ]; then
+		ret=1
+	fi
+}
+
 kci_add_dummy()
 {
 	ip link add name "$devdummy" type dummy
@@ -29,6 +37,26 @@ kci_del_dummy()
 	check_err $?
 }
 
+kci_test_netconf()
+{
+	dev="$1"
+	r=$ret
+
+	ip netconf show dev "$dev" > /dev/null
+	check_err $?
+
+	for f in 4 6; do
+		ip -$f netconf show dev "$dev" > /dev/null
+		check_err $?
+	done
+
+	if [ $ret -ne 0 ] ;then
+		echo "FAIL: ip netconf show $dev"
+		test $r -eq 0 && ret=0
+		return 1
+	fi
+}
+
 # add a bridge with vlans on top
 kci_test_bridge()
 {
@@ -55,6 +83,11 @@ kci_test_bridge()
 	check_err $?
 	ip r s t all > /dev/null
 	check_err $?
+
+	for name in "$devbr" "$vlandev" "$devdummy" ; do
+		kci_test_netconf "$name"
+	done
+
 	ip -6 addr del dev "$vlandev" dead:42::1234/64
 	check_err $?
 
@@ -92,6 +125,9 @@ kci_test_gre()
 	check_err $?
 	ip addr > /dev/null
 	check_err $?
+
+	kci_test_netconf "$gredev"
+
 	ip addr del dev "$devdummy" 10.23.7.11/24
 	check_err $?
 
@@ -235,6 +271,237 @@ kci_test_addrlabel()
 	echo "PASS: ipv6 addrlabel"
 }
 
+kci_test_ifalias()
+{
+	ret=0
+	namewant=$(uuidgen)
+	syspathname="/sys/class/net/$devdummy/ifalias"
+
+	ip link set dev "$devdummy" alias "$namewant"
+	check_err $?
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: cannot set interface alias of $devdummy to $namewant"
+		return 1
+	fi
+
+	ip link show "$devdummy" | grep -q "alias $namewant"
+	check_err $?
+
+	if [ -r "$syspathname" ] ; then
+		read namehave < "$syspathname"
+		if [ "$namewant" != "$namehave" ]; then
+			echo "FAIL: did set ifalias $namewant but got $namehave"
+			return 1
+		fi
+
+		namewant=$(uuidgen)
+		echo "$namewant" > "$syspathname"
+	        ip link show "$devdummy" | grep -q "alias $namewant"
+		check_err $?
+
+		# sysfs interface allows to delete alias again
+		echo "" > "$syspathname"
+
+	        ip link show "$devdummy" | grep -q "alias $namewant"
+		check_fail $?
+
+		for i in $(seq 1 100); do
+			uuidgen > "$syspathname" &
+		done
+
+		wait
+
+		# re-add the alias -- kernel should free mem when dummy dev is removed
+		ip link set dev "$devdummy" alias "$namewant"
+		check_err $?
+	fi
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: set interface alias $devdummy to $namewant"
+		return 1
+	fi
+
+	echo "PASS: set ifalias $namewant for $devdummy"
+}
+
+kci_test_vrf()
+{
+	vrfname="test-vrf"
+	ret=0
+
+	ip link show type vrf 2>/dev/null
+	if [ $? -ne 0 ]; then
+		echo "SKIP: vrf: iproute2 too old"
+		return 0
+	fi
+
+	ip link add "$vrfname" type vrf table 10
+	check_err $?
+	if [ $ret -ne 0 ];then
+		echo "FAIL: can't add vrf interface, skipping test"
+		return 0
+	fi
+
+	ip -br link show type vrf | grep -q "$vrfname"
+	check_err $?
+	if [ $ret -ne 0 ];then
+		echo "FAIL: created vrf device not found"
+		return 1
+	fi
+
+	ip link set dev "$vrfname" up
+	check_err $?
+
+	ip link set dev "$devdummy" master "$vrfname"
+	check_err $?
+	ip link del dev "$vrfname"
+	check_err $?
+
+	if [ $ret -ne 0 ];then
+		echo "FAIL: vrf"
+		return 1
+	fi
+
+	echo "PASS: vrf"
+}
+
+kci_test_encap_vxlan()
+{
+	ret=0
+	vxlan="test-vxlan0"
+	vlan="test-vlan0"
+	testns="$1"
+
+	ip netns exec "$testns" ip link add "$vxlan" type vxlan id 42 group 239.1.1.1 \
+		dev "$devdummy" dstport 4789 2>/dev/null
+	if [ $? -ne 0 ]; then
+		echo "FAIL: can't add vxlan interface, skipping test"
+		return 0
+	fi
+	check_err $?
+
+	ip netns exec "$testns" ip addr add 10.2.11.49/24 dev "$vxlan"
+	check_err $?
+
+	ip netns exec "$testns" ip link set up dev "$vxlan"
+	check_err $?
+
+	ip netns exec "$testns" ip link add link "$vxlan" name "$vlan" type vlan id 1
+	check_err $?
+
+	ip netns exec "$testns" ip link del "$vxlan"
+	check_err $?
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: vxlan"
+		return 1
+	fi
+	echo "PASS: vxlan"
+}
+
+kci_test_encap_fou()
+{
+	ret=0
+	name="test-fou"
+	testns="$1"
+
+	ip fou help 2>&1 |grep -q 'Usage: ip fou'
+	if [ $? -ne 0 ];then
+		echo "SKIP: fou: iproute2 too old"
+		return 1
+	fi
+
+	ip netns exec "$testns" ip fou add port 7777 ipproto 47 2>/dev/null
+	if [ $? -ne 0 ];then
+		echo "FAIL: can't add fou port 7777, skipping test"
+		return 1
+	fi
+
+	ip netns exec "$testns" ip fou add port 8888 ipproto 4
+	check_err $?
+
+	ip netns exec "$testns" ip fou del port 9999 2>/dev/null
+	check_fail $?
+
+	ip netns exec "$testns" ip fou del port 7777
+	check_err $?
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: fou"
+		return 1
+	fi
+
+	echo "PASS: fou"
+}
+
+# test various encap methods, use netns to avoid unwanted interference
+kci_test_encap()
+{
+	testns="testns"
+	ret=0
+
+	ip netns add "$testns"
+	if [ $? -ne 0 ]; then
+		echo "SKIP encap tests: cannot add net namespace $testns"
+		return 1
+	fi
+
+	ip netns exec "$testns" ip link set lo up
+	check_err $?
+
+	ip netns exec "$testns" ip link add name "$devdummy" type dummy
+	check_err $?
+	ip netns exec "$testns" ip link set "$devdummy" up
+	check_err $?
+
+	kci_test_encap_vxlan "$testns"
+	kci_test_encap_fou "$testns"
+
+	ip netns del "$testns"
+}
+
+kci_test_macsec()
+{
+	msname="test_macsec0"
+	ret=0
+
+	ip macsec help 2>&1 | grep -q "^Usage: ip macsec"
+	if [ $? -ne 0 ]; then
+		echo "SKIP: macsec: iproute2 too old"
+		return 0
+	fi
+
+	ip link add link "$devdummy" "$msname" type macsec port 42 encrypt on
+	check_err $?
+	if [ $ret -ne 0 ];then
+		echo "FAIL: can't add macsec interface, skipping test"
+		return 1
+	fi
+
+	ip macsec add "$msname" tx sa 0 pn 1024 on key 01 12345678901234567890123456789012
+	check_err $?
+
+	ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef"
+	check_err $?
+
+	ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" sa 0 pn 1 on key 00 0123456789abcdef0123456789abcdef
+	check_err $?
+
+	ip macsec show > /dev/null
+	check_err $?
+
+	ip link del dev "$msname"
+	check_err $?
+
+	if [ $ret -ne 0 ];then
+		echo "FAIL: macsec"
+		return 1
+	fi
+
+	echo "PASS: macsec"
+}
+
 kci_test_rtnl()
 {
 	kci_add_dummy
@@ -249,6 +516,10 @@ kci_test_rtnl()
 	kci_test_gre
 	kci_test_bridge
 	kci_test_addrlabel
+	kci_test_ifalias
+	kci_test_vrf
+	kci_test_encap
+	kci_test_macsec
 
 	kci_del_dummy
 }
diff --git a/tools/testing/selftests/tc-testing/.gitignore b/tools/testing/selftests/tc-testing/.gitignore
index c18dd8d83cee..7a60b85e148f 100644
--- a/tools/testing/selftests/tc-testing/.gitignore
+++ b/tools/testing/selftests/tc-testing/.gitignore
@@ -1 +1,2 @@
 __pycache__/
+*.pyc
diff --git a/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt b/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt
index 4e09257bc443..00438331ba47 100644
--- a/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt
+++ b/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt
@@ -34,6 +34,12 @@ category:     A list of single-word descriptions covering what the command
 setup:        The list of commands required to ensure the command under test
               succeeds. For example: if testing a filter, the command to create
               the qdisc would appear here.
+	      This list can be empty.
+	      Each command can be a string to be executed, or a list consisting
+	      of a string which is a command to be executed, followed by 1 or
+	      more acceptable exit codes for this command.
+	      If only a string is given for the command, then an exit code of 0
+	      will be expected.
 cmdUnderTest: The tc command being tested itself.
 expExitCode:  The code returned by the command under test upon its termination.
               tdc will compare this value against the actual returned value.
@@ -49,6 +55,12 @@ matchCount:   How many times the regex in matchPattern should match. A value
 teardown:     The list of commands to clean up after the test is completed.
               The environment should be returned to the same state as when
               this test was started: qdiscs deleted, actions flushed, etc.
+	      This list can be empty.
+	      Each command can be a string to be executed, or a list consisting
+	      of a string which is a command to be executed, followed by 1 or
+	      more acceptable exit codes for this command.
+	      If only a string is given for the command, then an exit code of 0
+	      will be expected.
 
 
 SETUP/TEARDOWN ERRORS
diff --git a/tools/testing/selftests/tc-testing/creating-testcases/example.json b/tools/testing/selftests/tc-testing/creating-testcases/example.json
new file mode 100644
index 000000000000..5ec501200970
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/creating-testcases/example.json
@@ -0,0 +1,55 @@
+[
+    {
+        "id": "1f",
+        "name": "simple test to test framework",
+        "category": [
+            "example"
+        ],
+        "setup": [
+            "mkdir mytest"
+        ],
+        "cmdUnderTest": "touch mytest/blorfl",
+        "expExitCode": "0",
+        "verifyCmd": "ls mytest/* | grep '[b]lorfl'",
+        "matchPattern": "orfl",
+        "matchCount": "1",
+        "teardown": [
+            "rm -rf mytest"
+        ]
+    },
+    {
+        "id": "2f",
+        "name": "simple test, no need for verify",
+        "category": [
+            "example"
+        ],
+        "setup": [
+            "mkdir mytest",
+            "touch mytest/blorfl"
+        ],
+        "cmdUnderTest": "ls mytest/blorfl",
+        "expExitCode": "0",
+        "verifyCmd": "/bin/true",
+        "matchPattern": " ",
+        "matchCount": "0",
+        "teardown": [
+            "rm -rf mytest"
+        ]
+    },
+    {
+        "id": "3f",
+        "name": "simple test, no need for setup or teardown (or verify)",
+        "category": [
+            "example"
+        ],
+        "setup": [
+        ],
+        "cmdUnderTest": "ip l l lo",
+        "expExitCode": "0",
+        "verifyCmd": "/bin/true",
+        "matchPattern": " ",
+        "matchCount": "0",
+        "teardown": [
+        ]
+    }
+]
diff --git a/tools/testing/selftests/tc-testing/creating-testcases/template.json b/tools/testing/selftests/tc-testing/creating-testcases/template.json
index 87971744bdd4..8b99b86d65bd 100644
--- a/tools/testing/selftests/tc-testing/creating-testcases/template.json
+++ b/tools/testing/selftests/tc-testing/creating-testcases/template.json
@@ -26,7 +26,13 @@
             ""
         ],
         "setup": [
-            ""
+            "",
+	    [
+		"",
+		0,
+		1,
+		255
+	    ]
         ],
         "cmdUnderTest": "",
         "expExitCode": "",
@@ -34,7 +40,12 @@
         "matchPattern": "",
         "matchCount": "",
         "teardown": [
-            ""
+            "",
+	    [
+		"",
+		0,
+		255
+            ]
         ]
     }
 ]
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/gact.json b/tools/testing/selftests/tc-testing/tc-tests/actions/gact.json
new file mode 100644
index 000000000000..e2187b6e0b7a
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/gact.json
@@ -0,0 +1,469 @@
+[
+    {
+        "id": "e89a",
+        "name": "Add valid pass action",
+        "category": [
+            "actions",
+            "gact"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action gact",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action pass index 8",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action gact",
+        "matchPattern": "action order [0-9]*: gact action pass.*index 8 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action gact"
+        ]
+    },
+    {
+        "id": "a02c",
+        "name": "Add valid pipe action",
+        "category": [
+            "actions",
+            "gact"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action gact",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action pipe index 6",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action gact",
+        "matchPattern": "action order [0-9]*: gact action pipe.*index 6 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action gact"
+        ]
+    },
+    {
+        "id": "feef",
+        "name": "Add valid reclassify action",
+        "category": [
+            "actions",
+            "gact"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action gact",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action reclassify index 5",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action gact",
+        "matchPattern": "action order [0-9]*: gact action reclassify.*index 5 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action gact"
+        ]
+    },
+    {
+        "id": "8a7a",
+        "name": "Add valid drop action",
+        "category": [
+            "actions",
+            "gact"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action gact",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action drop index 30",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action gact",
+        "matchPattern": "action order [0-9]*: gact action drop.*index 30 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action gact"
+        ]
+    },
+    {
+        "id": "9a52",
+        "name": "Add valid continue action",
+        "category": [
+            "actions",
+            "gact"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action gact",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action continue index 432",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action gact",
+        "matchPattern": "action order [0-9]*: gact action continue.*index 432 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action gact"
+        ]
+    },
+    {
+        "id": "d700",
+        "name": "Add invalid action",
+        "category": [
+            "actions",
+            "gact"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action gact",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action pump index 386",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action gact",
+        "matchPattern": "action order [0-9]*: gact action.*index 386 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action gact"
+        ]
+    },
+    {
+        "id": "9215",
+        "name": "Add action with duplicate index",
+        "category": [
+            "actions",
+            "gact"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action gact",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action pipe index 15"
+        ],
+        "cmdUnderTest": "$TC actions add action drop index 15",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action gact",
+        "matchPattern": "action order [0-9]*: gact action drop.*index 15 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action gact"
+        ]
+    },
+    {
+        "id": "798e",
+        "name": "Add action with index exceeding 32-bit maximum",
+        "category": [
+            "actions",
+            "gact"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action gact",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action drop index 4294967296",
+        "expExitCode": "255",
+        "verifyCmd": "actions list action gact",
+        "matchPattern": "action order [0-9]*: gact action drop.*index 4294967296 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action gact"
+        ]
+    },
+    {
+        "id": "22be",
+        "name": "Add action with index at 32-bit maximum",
+        "category": [
+            "actions",
+            "gact"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action gact",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action drop index 4294967295",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action gact",
+        "matchPattern": "action order [0-9]*: gact action drop.*index 4294967295 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action gact"
+        ]
+    },
+    {
+        "id": "ac2a",
+        "name": "List actions",
+        "category": [
+            "actions",
+            "gact"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action gact",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action reclassify index 101",
+            "$TC actions add action reclassify index 102",
+            "$TC actions add action reclassify index 103",
+            "$TC actions add action reclassify index 104",
+            "$TC actions add action reclassify index 105"
+        ],
+        "cmdUnderTest": "$TC actions list action gact",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action gact",
+        "matchPattern": "action order [0-9]*: gact action reclassify",
+        "matchCount": "5",
+        "teardown": [
+            "$TC actions flush action gact"
+        ]
+    },
+    {
+        "id": "3edf",
+        "name": "Flush gact actions",
+        "category": [
+            "actions",
+            "gact"
+        ],
+        "setup": [
+            "$TC actions add action reclassify index 101",
+            "$TC actions add action reclassify index 102",
+            "$TC actions add action reclassify index 103",
+            "$TC actions add action reclassify index 104",
+            "$TC actions add action reclassify index 105"
+        ],
+        "cmdUnderTest": "$TC actions flush action gact",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action gact",
+        "matchPattern": "action order [0-9]*: gact action reclassify",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "63ec",
+        "name": "Delete pass action",
+        "category": [
+            "actions",
+            "gact"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action gact",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action pass index 1"
+        ],
+        "cmdUnderTest": "$TC actions del action gact index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action gact",
+        "matchPattern": "action order [0-9]*: gact action pass.*index 1 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action gact"
+        ]
+    },
+    {
+        "id": "46be",
+        "name": "Delete pipe action",
+        "category": [
+            "actions",
+            "gact"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action gact",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action pipe index 9"
+        ],
+        "cmdUnderTest": "$TC actions del action gact index 9",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action gact",
+        "matchPattern": "action order [0-9]*: gact action pipe.*index 9 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action gact"
+        ]
+    },
+    {
+        "id": "2e08",
+        "name": "Delete reclassify action",
+        "category": [
+            "actions",
+            "gact"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action gact",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action reclassify index 65536"
+        ],
+        "cmdUnderTest": "$TC actions del action gact index 65536",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action gact",
+        "matchPattern": "action order [0-9]*: gact action reclassify.*index 65536 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action gact"
+        ]
+    },
+    {
+        "id": "99c4",
+        "name": "Delete drop action",
+        "category": [
+            "actions",
+            "gact"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action gact",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action drop index 16"
+        ],
+        "cmdUnderTest": "$TC actions del action gact index 16",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action gact",
+        "matchPattern": "action order [0-9]*: gact action drop.*index 16 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action gact"
+        ]
+    },
+    {
+        "id": "fb6b",
+        "name": "Delete continue action",
+        "category": [
+            "actions",
+            "gact"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action gact",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action continue index 32"
+        ],
+        "cmdUnderTest": "$TC actions del action gact index 32",
+        "expExitCode": "0",
+        "verifyCmd": "actions list action gact",
+        "matchPattern": "action order [0-9]*: gact action continue.*index 32 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action gact"
+        ]
+    },
+    {
+        "id": "0eb3",
+        "name": "Delete non-existent action",
+        "category": [
+            "actions",
+            "gact"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action gact",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions del action gact index 2",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action gact",
+        "matchPattern": "action order [0-9]*: gact action",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action gact"
+        ]
+    },
+    {
+        "id": "f02c",
+        "name": "Replace gact action",
+        "category": [
+            "actions",
+            "gact"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action gact",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action drop index 10",
+            "$TC actions add action drop index 12"
+        ],
+        "cmdUnderTest": "$TC actions replace action ok index 12",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action gact",
+        "matchPattern": "action order [0-9]*: gact action pass",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action gact"
+        ]
+    },
+    {
+        "id": "525f",
+        "name": "Get gact action by index",
+        "category": [
+            "actions",
+            "gact"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action gact",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action drop index 3900800700"
+        ],
+        "cmdUnderTest": "$TC actions get action gact index 3900800700",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action gact index 3900800700",
+        "matchPattern": "index 3900800700",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action gact"
+        ]
+    }
+]
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/ife.json b/tools/testing/selftests/tc-testing/tc-tests/actions/ife.json
new file mode 100644
index 000000000000..9f34f0753969
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/ife.json
@@ -0,0 +1,52 @@
+[
+    {
+        "id": "a568",
+        "name": "Add action with ife type",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action ife encode type 0xDEAD index 1"
+        ],
+        "cmdUnderTest": "$TC actions get action ife index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 1",
+        "matchPattern": "type 0xDEAD",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "b983",
+        "name": "Add action without ife type",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action ife encode index 1"
+        ],
+        "cmdUnderTest": "$TC actions get action ife index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 1",
+        "matchPattern": "type 0xED3E",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    }
+]
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json b/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json
new file mode 100644
index 000000000000..0fcccf18399b
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json
@@ -0,0 +1,223 @@
+[
+    {
+        "id": "5124",
+        "name": "Add mirred mirror to egress action",
+        "category": [
+            "actions",
+            "mirred"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action mirred",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action mirred egress mirror index 1 dev lo",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action mirred",
+        "matchPattern": "action order [0-9]*: mirred \\(Egress Mirror to device lo\\).*index 1 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action mirred"
+        ]
+    },
+    {
+        "id": "6fb4",
+        "name": "Add mirred redirect to egress action",
+        "category": [
+            "actions",
+            "mirred"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action mirred",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action mirred egress redirect index 2 dev lo action pipe",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action mirred",
+        "matchPattern": "action order [0-9]*: mirred \\(Egress Redirect to device lo\\).*index 2 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action mirred"
+        ]
+    },
+    {
+        "id": "ba38",
+        "name": "Get mirred actions",
+        "category": [
+            "actions",
+            "mirred"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action mirred",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action mirred egress mirror index 1 dev lo",
+            "$TC actions add action mirred egress redirect index 2 dev lo"
+        ],
+        "cmdUnderTest": "$TC actions show action mirred",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action mirred",
+        "matchPattern": "[Mirror|Redirect] to device lo",
+        "matchCount": "2",
+        "teardown": [
+            "$TC actions flush action mirred"
+        ]
+    },
+    {
+        "id": "d7c0",
+        "name": "Add invalid mirred direction",
+        "category": [
+            "actions",
+            "mirred"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action mirred",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action mirred inbound mirror index 20 dev lo",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action mirred",
+        "matchPattern": "action order [0-9]*: mirred \\(.*to device lo\\).*index 20 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action mirred"
+        ]
+    },
+    {
+        "id": "e213",
+        "name": "Add invalid mirred action",
+        "category": [
+            "actions",
+            "mirred"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action mirred",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action mirred egress remirror index 20 dev lo",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action mirred",
+        "matchPattern": "action order [0-9]*: mirred \\(Egress.*to device lo\\).*index 20 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action mirred"
+        ]
+    },
+    {
+        "id": "2d89",
+        "name": "Add mirred action with invalid device",
+        "category": [
+            "actions",
+            "mirred"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action mirred",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action mirred egress mirror index 20 dev eltoh",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action mirred",
+        "matchPattern": "action order [0-9]*: mirred \\(.*to device eltoh\\).*index 20 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action mirred"
+        ]
+    },
+    {
+        "id": "300b",
+        "name": "Add mirred action with duplicate index",
+        "category": [
+            "actions",
+            "mirred"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action mirred",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action mirred egress redirect index 15 dev lo"
+        ],
+        "cmdUnderTest": "$TC actions add action mirred egress mirror index 15 dev lo",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action mirred",
+        "matchPattern": "action order [0-9]*: mirred \\(.*to device lo\\).*index 15 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action mirred"
+        ]
+    },
+    {
+        "id": "a70e",
+        "name": "Delete mirred mirror action",
+        "category": [
+            "actions",
+            "mirred"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action mirred",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action mirred egress mirror index 5 dev lo"
+        ],
+        "cmdUnderTest": "$TC actions del action mirred index 5",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action mirred",
+        "matchPattern": "action order [0-9]*: mirred \\(Egress Mirror to device lo\\).*index 5 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action mirred"
+        ]
+    },
+    {
+        "id": "3fb3",
+        "name": "Delete mirred redirect action",
+        "category": [
+            "actions",
+            "mirred"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action mirred",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action mirred egress redirect index 5 dev lo"
+        ],
+        "cmdUnderTest": "$TC actions del action mirred index 5",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action mirred",
+        "matchPattern": "action order [0-9]*: mirred \\(Egress Redirect to device lo\\).*index 5 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action mirred"
+        ]
+    }
+]
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/police.json b/tools/testing/selftests/tc-testing/tc-tests/actions/police.json
new file mode 100644
index 000000000000..0e602a3f9393
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/police.json
@@ -0,0 +1,527 @@
+[
+    {
+        "id": "49aa",
+        "name": "Add valid basic police action",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action police rate 1kbit burst 10k index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action police",
+        "matchPattern": "action order [0-9]*:  police 0x1 rate 1Kbit burst 10Kb",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "3abe",
+        "name": "Add police action with duplicate index",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action police rate 4Mbit burst 120k index 9"
+        ],
+        "cmdUnderTest": "$TC actions add action police rate 8kbit burst 24k index 9",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions ls action police",
+        "matchPattern": "action order [0-9]*:  police 0x9",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "49fa",
+        "name": "Add valid police action with mtu",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action police rate 90kbit burst 10k mtu 1k index 98",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action police index 98",
+        "matchPattern": "action order [0-9]*:  police 0x62 rate 90Kbit burst 10Kb mtu 1Kb",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "7943",
+        "name": "Add valid police action with peakrate",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action police rate 90kbit burst 10k mtu 2kb peakrate 100kbit index 3",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action police",
+        "matchPattern": "action order [0-9]*:  police 0x3 rate 90Kbit burst 10Kb mtu 2Kb peakrate 100Kbit",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "055e",
+        "name": "Add police action with peakrate and no mtu",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action police rate 5kbit burst 6kb peakrate 10kbit index 9",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions ls action police",
+        "matchPattern": "action order [0-9]*:  police 0x9 rate 5Kb burst 10Kb",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "f057",
+        "name": "Add police action with valid overhead",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action police rate 1mbit burst 100k overhead 64 index 64",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action police index 64",
+        "matchPattern": "action order [0-9]*:  police 0x40 rate 1Mbit burst 100Kb mtu 2Kb action reclassify overhead 64b",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "7ffb",
+        "name": "Add police action with ethernet linklayer type",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action police rate 2mbit burst 200k linklayer ethernet index 8",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions show action police",
+        "matchPattern": "action order [0-9]*:  police 0x8 rate 2Mbit burst 200Kb mtu 2Kb action reclassify overhead 0b",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "3dda",
+        "name": "Add police action with atm linklayer type",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action police rate 2mbit burst 200k linklayer atm index 8",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions show action police",
+        "matchPattern": "action order [0-9]*:  police 0x8 rate 2Mbit burst 200Kb mtu 2Kb action reclassify overhead 0b linklayer atm",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "551b",
+        "name": "Add police actions with conform-exceed control continue/drop",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action police rate 3mbit burst 250k conform-exceed continue/drop index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action police index 1",
+        "matchPattern": "action order [0-9]*:  police 0x1 rate 3Mbit burst 250Kb mtu 2Kb action continue/drop",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "0c70",
+        "name": "Add police actions with conform-exceed control pass/reclassify",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action police rate 3mbit burst 250k conform-exceed pass/reclassify index 4",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action police",
+        "matchPattern": "action order [0-9]*:  police 0x4 rate 3Mbit burst 250Kb mtu 2Kb action pass/reclassify",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "d946",
+        "name": "Add police actions with conform-exceed control pass/pipe",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action police rate 3mbit burst 250k conform-exceed pass/pipe index 5",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action police",
+        "matchPattern": "action order [0-9]*:  police 0x5 rate 3Mbit burst 250Kb mtu 2Kb action pass/pipe",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "336e",
+        "name": "Delete police action",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action police rate 5mbit burst 2m index 12"
+        ],
+        "cmdUnderTest": "$TC actions delete action police index 12",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action police",
+        "matchPattern": "action order [0-9]*:  police 0xc rate 5Mb burst 2Mb",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "77fa",
+        "name": "Get single police action from many actions",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action police rate 1mbit burst 100k index 1",
+            "$TC actions add action police rate 2mbit burst 200k index 2",
+            "$TC actions add action police rate 3mbit burst 300k index 3",
+            "$TC actions add action police rate 4mbit burst 400k index 4",
+            "$TC actions add action police rate 5mbit burst 500k index 5",
+            "$TC actions add action police rate 6mbit burst 600k index 6",
+            "$TC actions add action police rate 7mbit burst 700k index 7",
+            "$TC actions add action police rate 8mbit burst 800k index 8"
+        ],
+        "cmdUnderTest": "$TC actions get action police index 4",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action police index 4",
+        "matchPattern": "action order [0-9]*:  police 0x4 rate 4Mbit burst 400Kb",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "aa43",
+        "name": "Get single police action without specifying index",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action police rate 1mbit burst 100k index 1"
+        ],
+        "cmdUnderTest": "$TC actions get action police",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action police",
+        "matchPattern": "action order [0-9]*:  police",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "858b",
+        "name": "List police actions",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action police rate 1mbit burst 100k index 1",
+            "$TC actions add action police rate 2mbit burst 200k index 2",
+            "$TC actions add action police rate 3mbit burst 300k index 3",
+            "$TC actions add action police rate 4mbit burst 400k index 4",
+            "$TC actions add action police rate 5mbit burst 500k index 5",
+            "$TC actions add action police rate 6mbit burst 600k index 6",
+            "$TC actions add action police rate 7mbit burst 700k index 7",
+            "$TC actions add action police rate 8mbit burst 800k index 8"
+        ],
+        "cmdUnderTest": "$TC actions list action police",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action police",
+        "matchPattern": "action order [0-9]*:  police 0x[1-8] rate [1-8]Mbit burst [1-8]00Kb",
+        "matchCount": "8",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "1c3a",
+        "name": "Flush police actions",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            "$TC actions add action police rate 1mbit burst 100k index 1",
+            "$TC actions add action police rate 2mbit burst 200k index 2",
+            "$TC actions add action police rate 3mbit burst 300k index 3",
+            "$TC actions add action police rate 4mbit burst 400k index 4",
+            "$TC actions add action police rate 5mbit burst 500k index 5",
+            "$TC actions add action police rate 6mbit burst 600k index 6",
+            "$TC actions add action police rate 7mbit burst 700k index 7",
+            "$TC actions add action police rate 8mbit burst 800k index 8"
+        ],
+        "cmdUnderTest": "$TC actions flush action police",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action police",
+        "matchPattern": "action order [0-9]*:  police",
+        "matchCount": "0",
+        "teardown": [
+            ""
+        ]
+    },
+    {
+        "id": "7326",
+        "name": "Add police action with control continue",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action police rate 7mbit burst 1m continue index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action police index 1",
+        "matchPattern": "action order [0-9]*:  police 0x1 rate 7Mbit burst 1024Kb mtu 2Kb action continue",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "34fa",
+        "name": "Add police action with control drop",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action police rate 7mbit burst 1m drop index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action police",
+        "matchPattern": "action order [0-9]*:  police 0x1 rate 7Mbit burst 1024Kb mtu 2Kb action drop",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "8dd5",
+        "name": "Add police action with control ok",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action police rate 7mbit burst 1m ok index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action police",
+        "matchPattern": "action order [0-9]*:  police 0x1 rate 7Mbit burst 1024Kb mtu 2Kb action pass",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "b9d1",
+        "name": "Add police action with control reclassify",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action police rate 7mbit burst 1m reclassify index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action police index 1",
+        "matchPattern": "action order [0-9]*:  police 0x1 rate 7Mbit burst 1024Kb mtu 2Kb action reclassify",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "c534",
+        "name": "Add police action with control pipe",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action police rate 7mbit burst 1m pipe index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action police",
+        "matchPattern": "action order [0-9]*:  police 0x1 rate 7Mbit burst 1024Kb mtu 2Kb action pipe",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    }
+]
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/simple.json b/tools/testing/selftests/tc-testing/tc-tests/actions/simple.json
new file mode 100644
index 000000000000..e89a7aa4012d
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/simple.json
@@ -0,0 +1,130 @@
+[
+    {
+        "id": "b078",
+        "name": "Add simple action",
+        "category": [
+            "actions",
+            "simple"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action simple",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action simple sdata \"A triumph\" index 60",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action simple",
+        "matchPattern": "action order [0-9]*: Simple <A triumph>.*index 60 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action simple"
+        ]
+    },
+    {
+        "id": "6d4c",
+        "name": "Add simple action with duplicate index",
+        "category": [
+            "actions",
+            "simple"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action simple",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action simple sdata \"Aruba\" index 4"
+        ],
+        "cmdUnderTest": "$TC actions add action simple sdata \"Jamaica\" index 4",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action simple",
+        "matchPattern": "action order [0-9]*: Simple <Jamaica>.*ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action simple"
+        ]
+    },
+    {
+        "id": "2542",
+        "name": "List simple actions",
+        "category": [
+            "actions",
+            "simple"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action simple",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action simple sdata \"Rock\"",
+            "$TC actions add action simple sdata \"Paper\"",
+            "$TC actions add action simple sdata \"Scissors\" index 98"
+        ],
+        "cmdUnderTest": "$TC actions list action simple",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action simple",
+        "matchPattern": "action order [0-9]*: Simple <[A-Z][a-z]*>",
+        "matchCount": "3",
+        "teardown": [
+            "$TC actions flush action simple"
+        ]
+    },
+    {
+        "id": "ea67",
+        "name": "Delete simple action",
+        "category": [
+            "actions",
+            "simple"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action simple",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action simple sdata \"Blinkenlights\" index 1"
+        ],
+        "cmdUnderTest": "$TC actions delete action simple index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action simple",
+        "matchPattern": "action order [0-9]*: Simple <Blinkenlights>.*index 1 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action simple"
+        ]
+    },
+    {
+        "id": "8ff1",
+        "name": "Flush simple actions",
+        "category": [
+            "actions",
+            "simple"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action simple",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action simple sdata \"Kirk\"",
+            "$TC actions add action simple sdata \"Spock\" index 50",
+            "$TC actions add action simple sdata \"McCoy\" index 9"
+        ],
+        "cmdUnderTest": "$TC actions flush action simple",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action simple",
+        "matchPattern": "action order [0-9]*: Simple <[A-Z][a-z]*>",
+        "matchCount": "0",
+        "teardown": [
+            ""
+        ]
+    }
+]
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json b/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json
new file mode 100644
index 000000000000..99635ea4722e
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json
@@ -0,0 +1,320 @@
+[
+    {
+        "id": "6236",
+        "name": "Add skbedit action with valid mark",
+        "category": [
+            "actions",
+            "skbedit"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbedit",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbedit mark 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action skbedit",
+        "matchPattern": "action order [0-9]*:  skbedit mark 1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbedit"
+        ]
+    },
+    {
+        "id": "407b",
+        "name": "Add skbedit action with invalid mark",
+        "category": [
+            "actions",
+            "skbedit"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbedit",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbedit mark 666777888999",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action skbedit",
+        "matchPattern": "action order [0-9]*:  skbedit mark",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action skbedit"
+        ]
+    },
+    {
+        "id": "081d",
+        "name": "Add skbedit action with priority",
+        "category": [
+            "actions",
+            "skbedit"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbedit",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbedit prio 99",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action skbedit",
+        "matchPattern": "action order [0-9]*:  skbedit priority :99",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbedit"
+        ]
+    },
+    {
+        "id": "cc37",
+        "name": "Add skbedit action with invalid priority",
+        "category": [
+            "actions",
+            "skbedit"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbedit",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbedit prio foo",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action skbedit",
+        "matchPattern": "action order [0-9]*:  skbedit priority",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action skbedit"
+        ]
+    },
+    {
+        "id": "3c95",
+        "name": "Add skbedit action with queue_mapping",
+        "category": [
+            "actions",
+            "skbedit"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbedit",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbedit queue_mapping 909",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action skbedit",
+        "matchPattern": "action order [0-9]*:  skbedit queue_mapping 909",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbedit"
+        ]
+    },
+    {
+        "id": "985c",
+        "name": "Add skbedit action with invalid queue_mapping",
+        "category": [
+            "actions",
+            "skbedit"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbedit",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbedit queue_mapping 67000",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action skbedit",
+        "matchPattern": "action order [0-9]*:  skbedit queue_mapping",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action skbedit"
+        ]
+    },
+    {
+        "id": "224f",
+        "name": "Add skbedit action with ptype host",
+        "category": [
+            "actions",
+            "skbedit"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbedit",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbedit ptype host",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action skbedit",
+        "matchPattern": "action order [0-9]*:  skbedit ptype host",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbedit"
+        ]
+    },
+    {
+        "id": "d1a3",
+        "name": "Add skbedit action with ptype otherhost",
+        "category": [
+            "actions",
+            "skbedit"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbedit",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbedit ptype otherhost",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action skbedit",
+        "matchPattern": "action order [0-9]*:  skbedit ptype otherhost",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbedit"
+        ]
+    },
+    {
+        "id": "b9c6",
+        "name": "Add skbedit action with invalid ptype",
+        "category": [
+            "actions",
+            "skbedit"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbedit",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbedit ptype openair",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action skbedit",
+        "matchPattern": "action order [0-9]*:  skbedit ptype openair",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action skbedit"
+        ]
+    },
+    {
+        "id": "5172",
+        "name": "List skbedit actions",
+        "category": [
+            "actions",
+            "skbedit"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbedit",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action skbedit ptype otherhost",
+            "$TC actions add action skbedit ptype broadcast",
+            "$TC actions add action skbedit mark 59",
+            "$TC actions add action skbedit mark 409"
+        ],
+        "cmdUnderTest": "$TC actions list action skbedit",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action skbedit",
+        "matchPattern": "action order [0-9]*:  skbedit",
+        "matchCount": "4",
+        "teardown": [
+            "$TC actions flush action skbedit"
+        ]
+    },
+    {
+        "id": "a6d6",
+        "name": "Add skbedit action with index",
+        "category": [
+            "actions",
+            "skbedit"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbedit",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbedit mark 808 index 4040404040",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action skbedit",
+        "matchPattern": "index 4040404040",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbedit"
+        ]
+    },
+    {
+        "id": "38f3",
+        "name": "Delete skbedit action",
+        "category": [
+            "actions",
+            "skbedit"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbedit",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action skbedit mark 42 index 9009"
+        ],
+        "cmdUnderTest": "$TC actions del action skbedit index 9009",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action skbedit",
+        "matchPattern": "action order [0-9]*:  skbedit mark 42",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action skbedit"
+        ]
+    },
+    {
+        "id": "ce97",
+        "name": "Flush skbedit actions",
+        "category": [
+            "actions",
+            "skbedit"
+        ],
+        "setup": [
+            "$TC actions add action skbedit mark 500",
+            "$TC actions add action skbedit mark 501",
+            "$TC actions add action skbedit mark 502",
+            "$TC actions add action skbedit mark 503",
+            "$TC actions add action skbedit mark 504",
+            "$TC actions add action skbedit mark 505",
+            "$TC actions add action skbedit mark 506"
+        ],
+        "cmdUnderTest": "$TC actions flush action skbedit",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action skbedit",
+        "matchPattern": "action order [0-9]*:  skbedit",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action skbedit"
+        ]
+    }
+]
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/skbmod.json b/tools/testing/selftests/tc-testing/tc-tests/actions/skbmod.json
new file mode 100644
index 000000000000..e34075059c26
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/skbmod.json
@@ -0,0 +1,372 @@
+[
+    {
+        "id": "7d50",
+        "name": "Add skbmod action to set destination mac",
+        "category": [
+            "actions",
+            "skbmod"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbmod",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbmod set dmac 11:22:33:44:55:66 index 5",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action skbmod",
+        "matchPattern": "action order [0-9]*: skbmod pipe set dmac 11:22:33:44:55:66\\s+index 5",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbmod"
+        ]
+    },
+    {
+        "id": "9b29",
+        "name": "Add skbmod action to set source mac",
+        "category": [
+            "actions",
+            "skbmod"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbmod",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbmod set smac 77:88:99:AA:BB:CC index 7",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action skbmod index 7",
+        "matchPattern": "action order [0-9]*: skbmod pipe set smac 77:88:99:aa:bb:cc\\s+index 7",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbmod"
+        ]
+    },
+    {
+        "id": "1724",
+        "name": "Add skbmod action with invalid mac",
+        "category": [
+            "actions",
+            "skbmod"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbmod",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbmod set smac 00:44:55:44:55",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions ls action skbmod",
+        "matchPattern": "action order [0-9]*: skbmod pipe set smac 00:44:55:44:55",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action skbmod"
+        ]
+    },
+    {
+        "id": "3cf1",
+        "name": "Add skbmod action with valid etype",
+        "category": [
+            "actions",
+            "skbmod"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbmod",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbmod set etype 0xfefe",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action skbmod",
+        "matchPattern": "action order [0-9]*: skbmod pipe set etype 0xFEFE",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbmod"
+        ]
+    },
+    {
+        "id": "a749",
+        "name": "Add skbmod action with invalid etype",
+        "category": [
+            "actions",
+            "skbmod"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbmod",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbmod set etype 0xfefef",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions ls action skbmod",
+        "matchPattern": "action order [0-9]*: skbmod pipe set etype 0xFEFEF",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action skbmod"
+        ]
+    },
+    {
+        "id": "bfe6",
+        "name": "Add skbmod action to swap mac",
+        "category": [
+            "actions",
+            "skbmod"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbmod",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbmod swap mac",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action skbmod index 1",
+        "matchPattern": "action order [0-9]*: skbmod pipe swap mac",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbmod"
+        ]
+    },
+    {
+        "id": "839b",
+        "name": "Add skbmod action with control pipe",
+        "category": [
+            "actions",
+            "skbmod"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbmod",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbmod swap mac pipe",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action skbmod",
+        "matchPattern": "action order [0-9]*: skbmod pipe swap mac",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbmod"
+        ]
+    },
+    {
+        "id": "c167",
+        "name": "Add skbmod action with control reclassify",
+        "category": [
+            "actions",
+            "skbmod"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbmod",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbmod set etype 0xbeef reclassify",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action skbmod",
+        "matchPattern": "action order [0-9]*: skbmod reclassify set etype 0xBEEF",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbmod"
+        ]
+    },
+    {
+        "id": "0c2f",
+        "name": "Add skbmod action with control drop",
+        "category": [
+            "actions",
+            "skbmod"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbmod",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbmod set etype 0x0001 drop",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action skbmod index 1",
+        "matchPattern": "action order [0-9]*: skbmod drop set etype 0x1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbmod"
+        ]
+    },
+    {
+        "id": "d113",
+        "name": "Add skbmod action with control continue",
+        "category": [
+            "actions",
+            "skbmod"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbmod",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbmod set etype 0x1 continue",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action skbmod",
+        "matchPattern": "action order [0-9]*: skbmod continue set etype 0x1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbmod"
+        ]
+    },
+    {
+        "id": "7242",
+        "name": "Add skbmod action with control pass",
+        "category": [
+            "actions",
+            "skbmod"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbmod",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbmod set smac 00:00:00:00:00:01 pass",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action skbmod",
+        "matchPattern": "action order [0-9]*: skbmod pass set smac 00:00:00:00:00:01",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbmod"
+        ]
+    },
+    {
+        "id": "58cb",
+        "name": "List skbmod actions",
+        "category": [
+            "actions",
+            "skbmod"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbmod",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action skbmod set etype 0x0001",
+            "$TC actions add action skbmod set etype 0x0011",
+            "$TC actions add action skbmod set etype 0x0021",
+            "$TC actions add action skbmod set etype 0x0031",
+            "$TC actions add action skbmod set etype 0x0041"
+        ],
+        "cmdUnderTest": "$TC actions ls action skbmod",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action skbmod",
+        "matchPattern": "action order [0-9]*: skbmod",
+        "matchCount": "5",
+        "teardown": [
+            "$TC actions flush action skbmod"
+        ]
+    },
+    {
+        "id": "9aa8",
+        "name": "Get a single skbmod action from a list",
+        "category": [
+            "actions",
+            "skbmod"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbmod",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action skbmod set etype 0x0001",
+            "$TC actions add action skbmod set etype 0x0011",
+            "$TC actions add action skbmod set etype 0x0021",
+            "$TC actions add action skbmod set etype 0x0031",
+            "$TC actions add action skbmod set etype 0x0041"
+        ],
+        "cmdUnderTest": "$TC actions ls action skbmod",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action skbmod index 4",
+        "matchPattern": "action order [0-9]*: skbmod pipe set etype 0x0031",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbmod"
+        ]
+    },
+    {
+        "id": "e93a",
+        "name": "Delete an skbmod action",
+        "category": [
+            "actions",
+            "skbmod"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbmod",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action skbmod set etype 0x1111 index 909"
+        ],
+        "cmdUnderTest": "$TC actions del action skbmod index 909",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action skbmod",
+        "matchPattern": "action order [0-9]*: skbmod pipe set etype 0x1111\\s+index 909",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action skbmod"
+        ]
+    },
+    {
+        "id": "40c2",
+        "name": "Flush skbmod actions",
+        "category": [
+            "actions",
+            "skbmod"
+        ],
+        "setup": [
+            "$TC actions add action skbmod set etype 0x0001",
+            "$TC actions add action skbmod set etype 0x0011",
+            "$TC actions add action skbmod set etype 0x0021",
+            "$TC actions add action skbmod set etype 0x0031",
+            "$TC actions add action skbmod set etype 0x0041"
+        ],
+        "cmdUnderTest": "$TC actions flush action skbmod",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action skbmod",
+        "matchPattern": "action order [0-9]*: skbmod",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action skbmod"
+        ]
+    }
+]
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/tests.json b/tools/testing/selftests/tc-testing/tc-tests/actions/tests.json
deleted file mode 100644
index 6973bdc5b5bf..000000000000
--- a/tools/testing/selftests/tc-testing/tc-tests/actions/tests.json
+++ /dev/null
@@ -1,1165 +0,0 @@
-[
-    {
-        "id": "e89a",
-        "name": "Add valid pass action",
-        "category": [
-            "actions",
-            "gact"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action gact",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action pass index 8",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action gact",
-        "matchPattern": "action order [0-9]*: gact action pass.*index 8 ref",
-        "matchCount": "1",
-        "teardown": [
-            "$TC actions flush action gact"
-        ]
-    },
-    {
-        "id": "a02c",
-        "name": "Add valid pipe action",
-        "category": [
-            "actions",
-            "gact"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action gact",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action pipe index 6",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action gact",
-        "matchPattern": "action order [0-9]*: gact action pipe.*index 6 ref",
-        "matchCount": "1",
-        "teardown": [
-            "$TC actions flush action gact"
-        ]
-    },
-    {
-        "id": "feef",
-        "name": "Add valid reclassify action",
-        "category": [
-            "actions",
-            "gact"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action gact",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action reclassify index 5",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action gact",
-        "matchPattern": "action order [0-9]*: gact action reclassify.*index 5 ref",
-        "matchCount": "1",
-        "teardown": [
-            "$TC actions flush action gact"
-        ]
-    },
-    {
-        "id": "8a7a",
-        "name": "Add valid drop action",
-        "category": [
-            "actions",
-            "gact"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action gact",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action drop index 30",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action gact",
-        "matchPattern": "action order [0-9]*: gact action drop.*index 30 ref",
-        "matchCount": "1",
-        "teardown": [
-            "$TC actions flush action gact"
-        ]
-    },
-    {
-        "id": "9a52",
-        "name": "Add valid continue action",
-        "category": [
-            "actions",
-            "gact"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action gact",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action continue index 432",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action gact",
-        "matchPattern": "action order [0-9]*: gact action continue.*index 432 ref",
-        "matchCount": "1",
-        "teardown": [
-            "$TC actions flush action gact"
-        ]
-    },
-    {
-        "id": "d700",
-        "name": "Add invalid action",
-        "category": [
-            "actions",
-            "gact"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action gact",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action pump index 386",
-        "expExitCode": "255",
-        "verifyCmd": "$TC actions list action gact",
-        "matchPattern": "action order [0-9]*: gact action.*index 386 ref",
-        "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action gact"
-        ]
-    },
-    {
-        "id": "9215",
-        "name": "Add action with duplicate index",
-        "category": [
-            "actions",
-            "gact"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action gact",
-                0,
-                1,
-                255
-            ],
-            "$TC actions add action pipe index 15"
-        ],
-        "cmdUnderTest": "$TC actions add action drop index 15",
-        "expExitCode": "255",
-        "verifyCmd": "$TC actions list action gact",
-        "matchPattern": "action order [0-9]*: gact action drop.*index 15 ref",
-        "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action gact"
-        ]
-    },
-    {
-        "id": "798e",
-        "name": "Add action with index exceeding 32-bit maximum",
-        "category": [
-            "actions",
-            "gact"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action gact",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action drop index 4294967296",
-        "expExitCode": "255",
-        "verifyCmd": "actions list action gact",
-        "matchPattern": "action order [0-9]*: gact action drop.*index 4294967296 ref",
-        "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action gact"
-        ]
-    },
-    {
-        "id": "22be",
-        "name": "Add action with index at 32-bit maximum",
-        "category": [
-            "actions",
-            "gact"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action gact",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action drop index 4294967295",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action gact",
-        "matchPattern": "action order [0-9]*: gact action drop.*index 4294967295 ref",
-        "matchCount": "1",
-        "teardown": [
-            "$TC actions flush action gact"
-        ]
-    },
-    {
-        "id": "ac2a",
-        "name": "List actions",
-        "category": [
-            "actions",
-            "gact"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action gact",
-                0,
-                1,
-                255
-            ],
-            "$TC actions add action reclassify index 101",
-            "$TC actions add action reclassify index 102",
-            "$TC actions add action reclassify index 103",
-            "$TC actions add action reclassify index 104",
-            "$TC actions add action reclassify index 105"
-        ],
-        "cmdUnderTest": "$TC actions list action gact",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action gact",
-        "matchPattern": "action order [0-9]*: gact action reclassify",
-        "matchCount": "5",
-        "teardown": [
-            "$TC actions flush action gact"
-        ]
-    },
-    {
-        "id": "63ec",
-        "name": "Delete pass action",
-        "category": [
-            "actions",
-            "gact"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action gact",
-                0,
-                1,
-                255
-            ],
-            "$TC actions add action pass index 1"
-        ],
-        "cmdUnderTest": "$TC actions del action gact index 1",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action gact",
-        "matchPattern": "action order [0-9]*: gact action pass.*index 1 ref",
-        "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action gact"
-        ]
-    },
-    {
-        "id": "46be",
-        "name": "Delete pipe action",
-        "category": [
-            "actions",
-            "gact"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action gact",
-                0,
-                1,
-                255
-            ],
-            "$TC actions add action pipe index 9"
-        ],
-        "cmdUnderTest": "$TC actions del action gact index 9",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action gact",
-        "matchPattern": "action order [0-9]*: gact action pipe.*index 9 ref",
-        "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action gact"
-        ]
-    },
-    {
-        "id": "2e08",
-        "name": "Delete reclassify action",
-        "category": [
-            "actions",
-            "gact"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action gact",
-                0,
-                1,
-                255
-            ],
-            "$TC actions add action reclassify index 65536"
-        ],
-        "cmdUnderTest": "$TC actions del action gact index 65536",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action gact",
-        "matchPattern": "action order [0-9]*: gact action reclassify.*index 65536 ref",
-        "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action gact"
-        ]
-    },
-    {
-        "id": "99c4",
-        "name": "Delete drop action",
-        "category": [
-            "actions",
-            "gact"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action gact",
-                0,
-                1,
-                255
-            ],
-            "$TC actions add action drop index 16"
-        ],
-        "cmdUnderTest": "$TC actions del action gact index 16",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action gact",
-        "matchPattern": "action order [0-9]*: gact action drop.*index 16 ref",
-        "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action gact"
-        ]
-    },
-    {
-        "id": "fb6b",
-        "name": "Delete continue action",
-        "category": [
-            "actions",
-            "gact"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action gact",
-                0,
-                1,
-                255
-            ],
-            "$TC actions add action continue index 32"
-        ],
-        "cmdUnderTest": "$TC actions del action gact index 32",
-        "expExitCode": "0",
-        "verifyCmd": "actions list action gact",
-        "matchPattern": "action order [0-9]*: gact action continue.*index 32 ref",
-        "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action gact"
-        ]
-    },
-    {
-        "id": "0eb3",
-        "name": "Delete non-existent action",
-        "category": [
-            "actions",
-            "gact"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action gact",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions del action gact index 2",
-        "expExitCode": "255",
-        "verifyCmd": "$TC actions list action gact",
-        "matchPattern": "action order [0-9]*: gact action",
-        "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action gact"
-        ]
-    },
-    {
-        "id": "5124",
-        "name": "Add mirred mirror to egress action",
-        "category": [
-            "actions",
-            "mirred"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action mirred",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action mirred egress mirror index 1 dev lo",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action mirred",
-        "matchPattern": "action order [0-9]*: mirred \\(Egress Mirror to device lo\\).*index 1 ref",
-        "matchCount": "1",
-        "teardown": [
-            "$TC actions flush action mirred"
-        ]
-    },
-    {
-        "id": "6fb4",
-        "name": "Add mirred redirect to egress action",
-        "category": [
-            "actions",
-            "mirred"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action mirred",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action mirred egress redirect index 2 dev lo action pipe",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action mirred",
-        "matchPattern": "action order [0-9]*: mirred \\(Egress Redirect to device lo\\).*index 2 ref",
-        "matchCount": "1",
-        "teardown": [
-            "$TC actions flush action mirred"
-        ]
-    },
-    {
-        "id": "ba38",
-        "name": "Get mirred actions",
-        "category": [
-            "actions",
-            "mirred"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action mirred",
-                0,
-                1,
-                255
-            ],
-            "$TC actions add action mirred egress mirror index 1 dev lo",
-            "$TC actions add action mirred egress redirect index 2 dev lo"
-        ],
-        "cmdUnderTest": "$TC actions show action mirred",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action mirred",
-        "matchPattern": "[Mirror|Redirect] to device lo",
-        "matchCount": "2",
-        "teardown": [
-            "$TC actions flush action mirred"
-        ]
-    },
-    {
-        "id": "d7c0",
-        "name": "Add invalid mirred direction",
-        "category": [
-            "actions",
-            "mirred"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action mirred",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action mirred inbound mirror index 20 dev lo",
-        "expExitCode": "255",
-        "verifyCmd": "$TC actions list action mirred",
-        "matchPattern": "action order [0-9]*: mirred \\(.*to device lo\\).*index 20 ref",
-        "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action mirred"
-        ]
-    },
-    {
-        "id": "e213",
-        "name": "Add invalid mirred action",
-        "category": [
-            "actions",
-            "mirred"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action mirred",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action mirred egress remirror index 20 dev lo",
-        "expExitCode": "255",
-        "verifyCmd": "$TC actions list action mirred",
-        "matchPattern": "action order [0-9]*: mirred \\(Egress.*to device lo\\).*index 20 ref",
-        "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action mirred"
-        ]
-    },
-    {
-        "id": "2d89",
-        "name": "Add mirred action with invalid device",
-        "category": [
-            "actions",
-            "mirred"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action mirred",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action mirred egress mirror index 20 dev eltoh",
-        "expExitCode": "255",
-        "verifyCmd": "$TC actions list action mirred",
-        "matchPattern": "action order [0-9]*: mirred \\(.*to device eltoh\\).*index 20 ref",
-        "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action mirred"
-        ]
-    },
-    {
-        "id": "300b",
-        "name": "Add mirred action with duplicate index",
-        "category": [
-            "actions",
-            "mirred"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action mirred",
-                0,
-                1,
-                255
-            ],
-            "$TC actions add action mirred egress redirect index 15 dev lo"
-        ],
-        "cmdUnderTest": "$TC actions add action mirred egress mirror index 15 dev lo",
-        "expExitCode": "255",
-        "verifyCmd": "$TC actions list action mirred",
-        "matchPattern": "action order [0-9]*: mirred \\(.*to device lo\\).*index 15 ref",
-        "matchCount": "1",
-        "teardown": [
-            "$TC actions flush action mirred"
-        ]
-    },
-    {
-        "id": "a70e",
-        "name": "Delete mirred mirror action",
-        "category": [
-            "actions",
-            "mirred"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action mirred",
-                0,
-                1,
-                255
-            ],
-            "$TC actions add action mirred egress mirror index 5 dev lo"
-        ],
-        "cmdUnderTest": "$TC actions del action mirred index 5",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action mirred",
-        "matchPattern": "action order [0-9]*: mirred \\(Egress Mirror to device lo\\).*index 5 ref",
-        "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action mirred"
-        ]
-    },
-    {
-        "id": "3fb3",
-        "name": "Delete mirred redirect action",
-        "category": [
-            "actions",
-            "mirred"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action mirred",
-                0,
-                1,
-                255
-            ],
-            "$TC actions add action mirred egress redirect index 5 dev lo"
-        ],
-        "cmdUnderTest": "$TC actions del action mirred index 5",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action mirred",
-        "matchPattern": "action order [0-9]*: mirred \\(Egress Redirect to device lo\\).*index 5 ref",
-        "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action mirred"
-        ]
-    },
-    {
-        "id": "b078",
-        "name": "Add simple action",
-        "category": [
-            "actions",
-            "simple"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action simple",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action simple sdata \"A triumph\" index 60",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action simple",
-        "matchPattern": "action order [0-9]*: Simple <A triumph>.*index 60 ref",
-        "matchCount": "1",
-        "teardown": [
-            "$TC actions flush action simple"
-        ]
-    },
-    {
-        "id": "6d4c",
-        "name": "Add simple action with duplicate index",
-        "category": [
-            "actions",
-            "simple"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action simple",
-                0,
-                1,
-                255
-            ],
-            "$TC actions add action simple sdata \"Aruba\" index 4"
-        ],
-        "cmdUnderTest": "$TC actions add action simple sdata \"Jamaica\" index 4",
-        "expExitCode": "255",
-        "verifyCmd": "$TC actions list action simple",
-        "matchPattern": "action order [0-9]*: Simple <Jamaica>.*ref",
-        "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action simple"
-        ]
-    },
-    {
-        "id": "2542",
-        "name": "List simple actions",
-        "category": [
-            "actions",
-            "simple"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action simple",
-                0,
-                1,
-                255
-            ],
-            "$TC actions add action simple sdata \"Rock\"",
-            "$TC actions add action simple sdata \"Paper\"",
-            "$TC actions add action simple sdata \"Scissors\" index 98"
-        ],
-        "cmdUnderTest": "$TC actions list action simple",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action simple",
-        "matchPattern": "action order [0-9]*: Simple <[A-Z][a-z]*>",
-        "matchCount": "3",
-        "teardown": [
-            "$TC actions flush action simple"
-        ]
-    },
-    {
-        "id": "ea67",
-        "name": "Delete simple action",
-        "category": [
-            "actions",
-            "simple"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action simple",
-                0,
-                1,
-                255
-            ],
-            "$TC actions add action simple sdata \"Blinkenlights\" index 1"
-        ],
-        "cmdUnderTest": "$TC actions delete action simple index 1",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action simple",
-        "matchPattern": "action order [0-9]*: Simple <Blinkenlights>.*index 1 ref",
-        "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action simple"
-        ]
-    },
-    {
-        "id": "8ff1",
-        "name": "Flush simple actions",
-        "category": [
-            "actions",
-            "simple"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action simple",
-                0,
-                1,
-                255
-            ],
-            "$TC actions add action simple sdata \"Kirk\"",
-            "$TC actions add action simple sdata \"Spock\" index 50",
-            "$TC actions add action simple sdata \"McCoy\" index 9"
-        ],
-        "cmdUnderTest": "$TC actions flush action simple",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action simple",
-        "matchPattern": "action order [0-9]*: Simple <[A-Z][a-z]*>",
-        "matchCount": "0",
-        "teardown": [
-            ""
-        ]
-    },
-    {
-        "id": "6236",
-        "name": "Add skbedit action with valid mark",
-        "category": [
-            "actions",
-            "skbedit"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action skbedit",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action skbedit mark 1",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action skbedit",
-        "matchPattern": "action order [0-9]*:  skbedit mark 1",
-        "matchCount": "1",
-        "teardown": [
-            "$TC actions flush action skbedit"
-        ]
-    },
-    {
-        "id": "407b",
-        "name": "Add skbedit action with invalid mark",
-        "category": [
-            "actions",
-            "skbedit"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action skbedit",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action skbedit mark 666777888999",
-        "expExitCode": "255",
-        "verifyCmd": "$TC actions list action skbedit",
-        "matchPattern": "action order [0-9]*:  skbedit mark",
-        "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action skbedit"
-        ]
-    },
-    {
-        "id": "081d",
-        "name": "Add skbedit action with priority",
-        "category": [
-            "actions",
-            "skbedit"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action skbedit",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action skbedit prio 99",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action skbedit",
-        "matchPattern": "action order [0-9]*:  skbedit priority :99",
-        "matchCount": "1",
-        "teardown": [
-            "$TC actions flush action skbedit"
-        ]
-    },
-    {
-        "id": "cc37",
-        "name": "Add skbedit action with invalid priority",
-        "category": [
-            "actions",
-            "skbedit"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action skbedit",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action skbedit prio foo",
-        "expExitCode": "255",
-        "verifyCmd": "$TC actions list action skbedit",
-        "matchPattern": "action order [0-9]*:  skbedit priority",
-        "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action skbedit"
-        ]
-    },
-    {
-        "id": "3c95",
-        "name": "Add skbedit action with queue_mapping",
-        "category": [
-            "actions",
-            "skbedit"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action skbedit",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action skbedit queue_mapping 909",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action skbedit",
-        "matchPattern": "action order [0-9]*:  skbedit queue_mapping 909",
-        "matchCount": "1",
-        "teardown": [
-            "$TC actions flush action skbedit"
-        ]
-    },
-    {
-        "id": "985c",
-        "name": "Add skbedit action with invalid queue_mapping",
-        "category": [
-            "actions",
-            "skbedit"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action skbedit",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action skbedit queue_mapping 67000",
-        "expExitCode": "255",
-        "verifyCmd": "$TC actions list action skbedit",
-        "matchPattern": "action order [0-9]*:  skbedit queue_mapping",
-        "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action skbedit"
-        ]
-    },
-    {
-        "id": "224f",
-        "name": "Add skbedit action with ptype host",
-        "category": [
-            "actions",
-            "skbedit"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action skbedit",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action skbedit ptype host",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action skbedit",
-        "matchPattern": "action order [0-9]*:  skbedit ptype host",
-        "matchCount": "1",
-        "teardown": [
-            "$TC actions flush action skbedit"
-        ]
-    },
-    {
-        "id": "d1a3",
-        "name": "Add skbedit action with ptype otherhost",
-        "category": [
-            "actions",
-            "skbedit"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action skbedit",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action skbedit ptype otherhost",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action skbedit",
-        "matchPattern": "action order [0-9]*:  skbedit ptype otherhost",
-        "matchCount": "1",
-        "teardown": [
-            "$TC actions flush action skbedit"
-        ]
-    },
-    {
-        "id": "b9c6",
-        "name": "Add skbedit action with invalid ptype",
-        "category": [
-            "actions",
-            "skbedit"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action skbedit",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action skbedit ptype openair",
-        "expExitCode": "255",
-        "verifyCmd": "$TC actions list action skbedit",
-        "matchPattern": "action order [0-9]*:  skbedit ptype openair",
-        "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action skbedit"
-        ]
-    },
-    {
-        "id": "5172",
-        "name": "List skbedit actions",
-        "category": [
-            "actions",
-            "skbedit"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action skbedit",
-                0,
-                1,
-                255
-            ],
-            "$TC actions add action skbedit ptype otherhost",
-            "$TC actions add action skbedit ptype broadcast",
-            "$TC actions add action skbedit mark 59",
-            "$TC actions add action skbedit mark 409"
-        ],
-        "cmdUnderTest": "$TC actions list action skbedit",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action skbedit",
-        "matchPattern": "action order [0-9]*:  skbedit",
-        "matchCount": "4",
-        "teardown": [
-            "$TC actions flush action skbedit"
-        ]
-    },
-    {
-        "id": "a6d6",
-        "name": "Add skbedit action with index",
-        "category": [
-            "actions",
-            "skbedit"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action skbedit",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action skbedit mark 808 index 4040404040",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action skbedit",
-        "matchPattern": "index 4040404040",
-        "matchCount": "1",
-        "teardown": [
-            "$TC actions flush action skbedit"
-        ]
-    },
-    {
-        "id": "38f3",
-        "name": "Delete skbedit action",
-        "category": [
-            "actions",
-            "skbedit"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action skbedit",
-                0,
-                1,
-                255
-            ],
-            "$TC actions add action skbedit mark 42 index 9009"
-        ],
-        "cmdUnderTest": "$TC actions del action skbedit index 9009",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action skbedit",
-        "matchPattern": "action order [0-9]*:  skbedit mark 42",
-        "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action skbedit"
-        ]
-    },
-    {
-        "id": "ce97",
-        "name": "Flush skbedit actions",
-        "category": [
-            "actions",
-            "skbedit"
-        ],
-        "setup": [
-            "$TC actions add action skbedit mark 500",
-            "$TC actions add action skbedit mark 501",
-            "$TC actions add action skbedit mark 502",
-            "$TC actions add action skbedit mark 503",
-            "$TC actions add action skbedit mark 504",
-            "$TC actions add action skbedit mark 505",
-            "$TC actions add action skbedit mark 506"
-        ],
-        "cmdUnderTest": "$TC actions flush action skbedit",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions list action skbedit",
-        "matchPattern": "action order [0-9]*:  skbedit",
-        "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action skbedit"
-        ]
-    },
-    {
-        "id": "f02c",
-        "name": "Replace gact action",
-        "category": [
-            "actions",
-            "gact"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action gact",
-                0,
-                1,
-                255
-            ],
-            "$TC actions add action drop index 10",
-            "$TC actions add action drop index 12"
-        ],
-        "cmdUnderTest": "$TC actions replace action ok index 12",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions ls action gact",
-        "matchPattern": "action order [0-9]*: gact action pass",
-        "matchCount": "1",
-        "teardown": [
-            "$TC actions flush action gact"
-        ]
-    },
-    {
-        "id": "525f",
-        "name": "Get gact action by index",
-        "category": [
-            "actions",
-            "gact"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action gact",
-                0,
-                1,
-                255
-            ],
-            "$TC actions add action drop index 3900800700"
-        ],
-        "cmdUnderTest": "$TC actions get action gact index 3900800700",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions get action gact index 3900800700",
-        "matchPattern": "index 3900800700",
-        "matchCount": "1",
-        "teardown": [
-            "$TC actions flush action gact"
-        ]
-    },
-    {
-        "id": "a568",
-        "name": "Add action with ife type",
-        "category": [
-            "actions",
-            "ife"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action ife",
-                0,
-                1,
-                255
-            ],
-            "$TC actions add action ife encode type 0xDEAD index 1"
-        ],
-        "cmdUnderTest": "$TC actions get action ife index 1",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "type 0xDEAD",
-        "matchCount": "1",
-        "teardown": [
-            "$TC actions flush action ife"
-        ]
-    },
-    {
-        "id": "b983",
-        "name": "Add action without ife type",
-        "category": [
-            "actions",
-            "ife"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action ife",
-                0,
-                1,
-                255
-            ],
-            "$TC actions add action ife encode index 1"
-        ],
-        "cmdUnderTest": "$TC actions get action ife index 1",
-        "expExitCode": "0",
-        "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "type 0xED3E",
-        "matchCount": "1",
-        "teardown": [
-            "$TC actions flush action ife"
-        ]
-    }
-]
\ No newline at end of file
diff --git a/tools/testing/selftests/tc-testing/tdc.py b/tools/testing/selftests/tc-testing/tdc.py
index b8462e1b74f9..fc373fdf2bdc 100755
--- a/tools/testing/selftests/tc-testing/tdc.py
+++ b/tools/testing/selftests/tc-testing/tdc.py
@@ -50,7 +50,7 @@ def exec_cmd(command, nsonly=True):
         stderr=subprocess.PIPE)
     (rawout, serr) = proc.communicate()
 
-    if proc.returncode != 0:
+    if proc.returncode != 0 and len(serr) > 0:
         foutput = serr.decode("utf-8")
     else:
         foutput = rawout.decode("utf-8")
@@ -180,15 +180,20 @@ def has_blank_ids(idlist):
 
 def load_from_file(filename):
     """
-    Open the JSON file containing the test cases and return them as an
-    ordered dictionary object.
+    Open the JSON file containing the test cases and return them
+    as list of ordered dictionary objects.
     """
-    with open(filename) as test_data:
-        testlist = json.load(test_data, object_pairs_hook=OrderedDict)
-    idlist = get_id_list(testlist)
-    if (has_blank_ids(idlist)):
-        for k in testlist:
-            k['filename'] = filename
+    try:
+        with open(filename) as test_data:
+            testlist = json.load(test_data, object_pairs_hook=OrderedDict)
+    except json.JSONDecodeError as jde:
+        print('IGNORING test case file {}\n\tBECAUSE:  {}'.format(filename, jde))
+        testlist = list()
+    else:
+        idlist = get_id_list(testlist)
+        if (has_blank_ids(idlist)):
+            for k in testlist:
+                k['filename'] = filename
     return testlist
 
 
@@ -210,7 +215,7 @@ def set_args(parser):
                         help='Run tests only from the specified category, or if no category is specified, list known categories.')
     parser.add_argument('-f', '--file', type=str,
                         help='Run tests from the specified file')
-    parser.add_argument('-l', '--list', type=str, nargs='?', const="", metavar='CATEGORY',
+    parser.add_argument('-l', '--list', type=str, nargs='?', const="++", metavar='CATEGORY',
                         help='List all test cases, or those only within the specified category')
     parser.add_argument('-s', '--show', type=str, nargs=1, metavar='ID', dest='showID',
                         help='Display the test case with specified id')
@@ -367,10 +372,10 @@ def set_operation_mode(args):
     testcases = get_categorized_testlist(alltests, ucat)
 
     if args.list:
-        if (len(args.list) == 0):
+        if (args.list == "++"):
             list_test_cases(alltests)
             exit(0)
-        elif(len(args.list > 0)):
+        elif(len(args.list) > 0):
             if (args.list not in ucat):
                 print("Unknown category " + args.list)
                 print("Available categories:")
diff --git a/tools/testing/selftests/tc-testing/tdc_config.py b/tools/testing/selftests/tc-testing/tdc_config.py
index eb188c729dd6..a023d0d62b25 100644
--- a/tools/testing/selftests/tc-testing/tdc_config.py
+++ b/tools/testing/selftests/tc-testing/tdc_config.py
@@ -18,3 +18,17 @@ NAMES = {
           # Name of the namespace to use
           'NS': 'tcut'
         }
+
+
+ENVIR = { }
+
+# put customizations in tdc_config_local.py
+try:
+    from tdc_config_local import *
+except ImportError as ie:
+    pass
+
+try:
+    NAMES.update(EXTRA_NAMES)
+except NameError as ne:
+    pass
diff --git a/tools/testing/selftests/tc-testing/tdc_config_local_template.py b/tools/testing/selftests/tc-testing/tdc_config_local_template.py
new file mode 100644
index 000000000000..d48fc732a399
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tdc_config_local_template.py
@@ -0,0 +1,23 @@
+"""
+tdc_config_local.py - tdc plugin-writer-specified values
+
+Copyright (C) 2017 bjb@mojatatu.com
+"""
+
+import os
+
+ENVIR = os.environ.copy()
+
+ENV_LD_LIBRARY_PATH = os.getenv('LD_LIBRARY_PATH', '')
+ENV_OTHER_LIB = os.getenv('OTHER_LIB', '')
+
+
+# example adding value to NAMES, without editing tdc_config.py
+EXTRA_NAMES = dict()
+EXTRA_NAMES['SOME_BIN'] = os.path.join(os.getenv('OTHER_BIN', ''), 'some_bin')
+
+
+# example adding values to ENVIR, without editing tdc_config.py
+ENVIR['VALGRIND_LIB'] = '/usr/lib/valgrind'
+ENVIR['VALGRIND_BIN'] = '/usr/bin/valgrind'
+ENVIR['VGDB_BIN'] = '/usr/bin/vgdb'
diff --git a/tools/testing/selftests/tc-testing/tdc_helper.py b/tools/testing/selftests/tc-testing/tdc_helper.py
index ccf2d2458703..db381120a566 100644
--- a/tools/testing/selftests/tc-testing/tdc_helper.py
+++ b/tools/testing/selftests/tc-testing/tdc_helper.py
@@ -16,7 +16,7 @@ def get_categorized_testlist(alltests, ucat):
 
 
 def get_unique_item(lst):
-    """ For a list, return a set of the unique items in the list. """
+    """ For a list, return a list of the unique items in the list. """
     return list(set(lst))
 
 
@@ -58,7 +58,7 @@ def print_sll(items):
 def print_test_case(tcase):
     """ Pretty-printing of a given test case. """
     for k in tcase.keys():
-        if (type(tcase[k]) == list):
+        if (isinstance(tcase[k], list)):
             print(k + ":")
             print_list(tcase[k])
         else:
diff --git a/tools/testing/vsock/.gitignore b/tools/testing/vsock/.gitignore
new file mode 100644
index 000000000000..dc5f11faf530
--- /dev/null
+++ b/tools/testing/vsock/.gitignore
@@ -0,0 +1,2 @@
+*.d
+vsock_diag_test
diff --git a/tools/testing/vsock/Makefile b/tools/testing/vsock/Makefile
new file mode 100644
index 000000000000..66ba0924194d
--- /dev/null
+++ b/tools/testing/vsock/Makefile
@@ -0,0 +1,9 @@
+all: test
+test: vsock_diag_test
+vsock_diag_test: vsock_diag_test.o timeout.o control.o
+
+CFLAGS += -g -O2 -Werror -Wall -I. -I../../include/uapi -I../../include -Wno-pointer-sign -fno-strict-overflow -fno-strict-aliasing -fno-common -MMD -U_FORTIFY_SOURCE -D_GNU_SOURCE
+.PHONY: all test clean
+clean:
+	${RM} *.o *.d vsock_diag_test
+-include *.d
diff --git a/tools/testing/vsock/README b/tools/testing/vsock/README
new file mode 100644
index 000000000000..2cc6d7302db6
--- /dev/null
+++ b/tools/testing/vsock/README
@@ -0,0 +1,36 @@
+AF_VSOCK test suite
+-------------------
+These tests exercise net/vmw_vsock/ host<->guest sockets for VMware, KVM, and
+Hyper-V.
+
+The following tests are available:
+
+  * vsock_diag_test - vsock_diag.ko module for listing open sockets
+
+The following prerequisite steps are not automated and must be performed prior
+to running tests:
+
+1. Build the kernel and these tests.
+2. Install the kernel and tests on the host.
+3. Install the kernel and tests inside the guest.
+4. Boot the guest and ensure that the AF_VSOCK transport is enabled.
+
+Invoke test binaries in both directions as follows:
+
+  # host=server, guest=client
+  (host)# $TEST_BINARY --mode=server \
+                       --control-port=1234 \
+                       --peer-cid=3
+  (guest)# $TEST_BINARY --mode=client \
+                        --control-host=$HOST_IP \
+                        --control-port=1234 \
+                        --peer-cid=2
+
+  # host=client, guest=server
+  (guest)# $TEST_BINARY --mode=server \
+                        --control-port=1234 \
+                        --peer-cid=2
+  (host)# $TEST_BINARY --mode=client \
+                       --control-port=$GUEST_IP \
+                       --control-port=1234 \
+                       --peer-cid=3
diff --git a/tools/testing/vsock/control.c b/tools/testing/vsock/control.c
new file mode 100644
index 000000000000..90fd47f0e422
--- /dev/null
+++ b/tools/testing/vsock/control.c
@@ -0,0 +1,219 @@
+/* Control socket for client/server test execution
+ *
+ * Copyright (C) 2017 Red Hat, Inc.
+ *
+ * Author: Stefan Hajnoczi <stefanha@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+/* The client and server may need to coordinate to avoid race conditions like
+ * the client attempting to connect to a socket that the server is not
+ * listening on yet.  The control socket offers a communications channel for
+ * such coordination tasks.
+ *
+ * If the client calls control_expectln("LISTENING"), then it will block until
+ * the server calls control_writeln("LISTENING").  This provides a simple
+ * mechanism for coordinating between the client and the server.
+ */
+
+#include <errno.h>
+#include <netdb.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+
+#include "timeout.h"
+#include "control.h"
+
+static int control_fd = -1;
+
+/* Open the control socket, either in server or client mode */
+void control_init(const char *control_host,
+		  const char *control_port,
+		  bool server)
+{
+	struct addrinfo hints = {
+		.ai_socktype = SOCK_STREAM,
+	};
+	struct addrinfo *result = NULL;
+	struct addrinfo *ai;
+	int ret;
+
+	ret = getaddrinfo(control_host, control_port, &hints, &result);
+	if (ret != 0) {
+		fprintf(stderr, "%s\n", gai_strerror(ret));
+		exit(EXIT_FAILURE);
+	}
+
+	for (ai = result; ai; ai = ai->ai_next) {
+		int fd;
+		int val = 1;
+
+		fd = socket(ai->ai_family, ai->ai_socktype, ai->ai_protocol);
+		if (fd < 0)
+			continue;
+
+		if (!server) {
+			if (connect(fd, ai->ai_addr, ai->ai_addrlen) < 0)
+				goto next;
+			control_fd = fd;
+			printf("Control socket connected to %s:%s.\n",
+			       control_host, control_port);
+			break;
+		}
+
+		if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR,
+			       &val, sizeof(val)) < 0) {
+			perror("setsockopt");
+			exit(EXIT_FAILURE);
+		}
+
+		if (bind(fd, ai->ai_addr, ai->ai_addrlen) < 0)
+			goto next;
+		if (listen(fd, 1) < 0)
+			goto next;
+
+		printf("Control socket listening on %s:%s\n",
+		       control_host, control_port);
+		fflush(stdout);
+
+		control_fd = accept(fd, NULL, 0);
+		close(fd);
+
+		if (control_fd < 0) {
+			perror("accept");
+			exit(EXIT_FAILURE);
+		}
+		printf("Control socket connection accepted...\n");
+		break;
+
+next:
+		close(fd);
+	}
+
+	if (control_fd < 0) {
+		fprintf(stderr, "Control socket initialization failed.  Invalid address %s:%s?\n",
+			control_host, control_port);
+		exit(EXIT_FAILURE);
+	}
+
+	freeaddrinfo(result);
+}
+
+/* Free resources */
+void control_cleanup(void)
+{
+	close(control_fd);
+	control_fd = -1;
+}
+
+/* Write a line to the control socket */
+void control_writeln(const char *str)
+{
+	ssize_t len = strlen(str);
+	ssize_t ret;
+
+	timeout_begin(TIMEOUT);
+
+	do {
+		ret = send(control_fd, str, len, MSG_MORE);
+		timeout_check("send");
+	} while (ret < 0 && errno == EINTR);
+
+	if (ret != len) {
+		perror("send");
+		exit(EXIT_FAILURE);
+	}
+
+	do {
+		ret = send(control_fd, "\n", 1, 0);
+		timeout_check("send");
+	} while (ret < 0 && errno == EINTR);
+
+	if (ret != 1) {
+		perror("send");
+		exit(EXIT_FAILURE);
+	}
+
+	timeout_end();
+}
+
+/* Return the next line from the control socket (without the trailing newline).
+ *
+ * The program terminates if a timeout occurs.
+ *
+ * The caller must free() the returned string.
+ */
+char *control_readln(void)
+{
+	char *buf = NULL;
+	size_t idx = 0;
+	size_t buflen = 0;
+
+	timeout_begin(TIMEOUT);
+
+	for (;;) {
+		ssize_t ret;
+
+		if (idx >= buflen) {
+			char *new_buf;
+
+			new_buf = realloc(buf, buflen + 80);
+			if (!new_buf) {
+				perror("realloc");
+				exit(EXIT_FAILURE);
+			}
+
+			buf = new_buf;
+			buflen += 80;
+		}
+
+		do {
+			ret = recv(control_fd, &buf[idx], 1, 0);
+			timeout_check("recv");
+		} while (ret < 0 && errno == EINTR);
+
+		if (ret == 0) {
+			fprintf(stderr, "unexpected EOF on control socket\n");
+			exit(EXIT_FAILURE);
+		}
+
+		if (ret != 1) {
+			perror("recv");
+			exit(EXIT_FAILURE);
+		}
+
+		if (buf[idx] == '\n') {
+			buf[idx] = '\0';
+			break;
+		}
+
+		idx++;
+	}
+
+	timeout_end();
+
+	return buf;
+}
+
+/* Wait until a given line is received or a timeout occurs */
+void control_expectln(const char *str)
+{
+	char *line;
+
+	line = control_readln();
+	if (strcmp(str, line) != 0) {
+		fprintf(stderr, "expected \"%s\" on control socket, got \"%s\"\n",
+			str, line);
+		exit(EXIT_FAILURE);
+	}
+
+	free(line);
+}
diff --git a/tools/testing/vsock/control.h b/tools/testing/vsock/control.h
new file mode 100644
index 000000000000..54a07efd267c
--- /dev/null
+++ b/tools/testing/vsock/control.h
@@ -0,0 +1,13 @@
+#ifndef CONTROL_H
+#define CONTROL_H
+
+#include <stdbool.h>
+
+void control_init(const char *control_host, const char *control_port,
+		  bool server);
+void control_cleanup(void);
+void control_writeln(const char *str);
+char *control_readln(void);
+void control_expectln(const char *str);
+
+#endif /* CONTROL_H */
diff --git a/tools/testing/vsock/timeout.c b/tools/testing/vsock/timeout.c
new file mode 100644
index 000000000000..c49b3003b2db
--- /dev/null
+++ b/tools/testing/vsock/timeout.c
@@ -0,0 +1,64 @@
+/* Timeout API for single-threaded programs that use blocking
+ * syscalls (read/write/send/recv/connect/accept).
+ *
+ * Copyright (C) 2017 Red Hat, Inc.
+ *
+ * Author: Stefan Hajnoczi <stefanha@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+/* Use the following pattern:
+ *
+ *   timeout_begin(TIMEOUT);
+ *   do {
+ *       ret = accept(...);
+ *       timeout_check("accept");
+ *   } while (ret < 0 && ret == EINTR);
+ *   timeout_end();
+ */
+
+#include <stdlib.h>
+#include <stdbool.h>
+#include <unistd.h>
+#include <stdio.h>
+#include "timeout.h"
+
+static volatile bool timeout;
+
+/* SIGALRM handler function.  Do not use sleep(2), alarm(2), or
+ * setitimer(2) while using this API - they may interfere with each
+ * other.
+ */
+void sigalrm(int signo)
+{
+	timeout = true;
+}
+
+/* Start a timeout.  Call timeout_check() to verify that the timeout hasn't
+ * expired.  timeout_end() must be called to stop the timeout.  Timeouts cannot
+ * be nested.
+ */
+void timeout_begin(unsigned int seconds)
+{
+	alarm(seconds);
+}
+
+/* Exit with an error message if the timeout has expired */
+void timeout_check(const char *operation)
+{
+	if (timeout) {
+		fprintf(stderr, "%s timed out\n", operation);
+		exit(EXIT_FAILURE);
+	}
+}
+
+/* Stop a timeout */
+void timeout_end(void)
+{
+	alarm(0);
+	timeout = false;
+}
diff --git a/tools/testing/vsock/timeout.h b/tools/testing/vsock/timeout.h
new file mode 100644
index 000000000000..77db9ce9860a
--- /dev/null
+++ b/tools/testing/vsock/timeout.h
@@ -0,0 +1,14 @@
+#ifndef TIMEOUT_H
+#define TIMEOUT_H
+
+enum {
+	/* Default timeout */
+	TIMEOUT = 10 /* seconds */
+};
+
+void sigalrm(int signo);
+void timeout_begin(unsigned int seconds);
+void timeout_check(const char *operation);
+void timeout_end(void);
+
+#endif /* TIMEOUT_H */
diff --git a/tools/testing/vsock/vsock_diag_test.c b/tools/testing/vsock/vsock_diag_test.c
new file mode 100644
index 000000000000..e896a4af52f4
--- /dev/null
+++ b/tools/testing/vsock/vsock_diag_test.c
@@ -0,0 +1,681 @@
+/*
+ * vsock_diag_test - vsock_diag.ko test suite
+ *
+ * Copyright (C) 2017 Red Hat, Inc.
+ *
+ * Author: Stefan Hajnoczi <stefanha@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <getopt.h>
+#include <stdio.h>
+#include <stdbool.h>
+#include <stdlib.h>
+#include <string.h>
+#include <errno.h>
+#include <unistd.h>
+#include <signal.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <linux/list.h>
+#include <linux/net.h>
+#include <linux/netlink.h>
+#include <linux/sock_diag.h>
+#include <netinet/tcp.h>
+
+#include "../../../include/uapi/linux/vm_sockets.h"
+#include "../../../include/uapi/linux/vm_sockets_diag.h"
+
+#include "timeout.h"
+#include "control.h"
+
+enum test_mode {
+	TEST_MODE_UNSET,
+	TEST_MODE_CLIENT,
+	TEST_MODE_SERVER
+};
+
+/* Per-socket status */
+struct vsock_stat {
+	struct list_head list;
+	struct vsock_diag_msg msg;
+};
+
+static const char *sock_type_str(int type)
+{
+	switch (type) {
+	case SOCK_DGRAM:
+		return "DGRAM";
+	case SOCK_STREAM:
+		return "STREAM";
+	default:
+		return "INVALID TYPE";
+	}
+}
+
+static const char *sock_state_str(int state)
+{
+	switch (state) {
+	case TCP_CLOSE:
+		return "UNCONNECTED";
+	case TCP_SYN_SENT:
+		return "CONNECTING";
+	case TCP_ESTABLISHED:
+		return "CONNECTED";
+	case TCP_CLOSING:
+		return "DISCONNECTING";
+	case TCP_LISTEN:
+		return "LISTEN";
+	default:
+		return "INVALID STATE";
+	}
+}
+
+static const char *sock_shutdown_str(int shutdown)
+{
+	switch (shutdown) {
+	case 1:
+		return "RCV_SHUTDOWN";
+	case 2:
+		return "SEND_SHUTDOWN";
+	case 3:
+		return "RCV_SHUTDOWN | SEND_SHUTDOWN";
+	default:
+		return "0";
+	}
+}
+
+static void print_vsock_addr(FILE *fp, unsigned int cid, unsigned int port)
+{
+	if (cid == VMADDR_CID_ANY)
+		fprintf(fp, "*:");
+	else
+		fprintf(fp, "%u:", cid);
+
+	if (port == VMADDR_PORT_ANY)
+		fprintf(fp, "*");
+	else
+		fprintf(fp, "%u", port);
+}
+
+static void print_vsock_stat(FILE *fp, struct vsock_stat *st)
+{
+	print_vsock_addr(fp, st->msg.vdiag_src_cid, st->msg.vdiag_src_port);
+	fprintf(fp, " ");
+	print_vsock_addr(fp, st->msg.vdiag_dst_cid, st->msg.vdiag_dst_port);
+	fprintf(fp, " %s %s %s %u\n",
+		sock_type_str(st->msg.vdiag_type),
+		sock_state_str(st->msg.vdiag_state),
+		sock_shutdown_str(st->msg.vdiag_shutdown),
+		st->msg.vdiag_ino);
+}
+
+static void print_vsock_stats(FILE *fp, struct list_head *head)
+{
+	struct vsock_stat *st;
+
+	list_for_each_entry(st, head, list)
+		print_vsock_stat(fp, st);
+}
+
+static struct vsock_stat *find_vsock_stat(struct list_head *head, int fd)
+{
+	struct vsock_stat *st;
+	struct stat stat;
+
+	if (fstat(fd, &stat) < 0) {
+		perror("fstat");
+		exit(EXIT_FAILURE);
+	}
+
+	list_for_each_entry(st, head, list)
+		if (st->msg.vdiag_ino == stat.st_ino)
+			return st;
+
+	fprintf(stderr, "cannot find fd %d\n", fd);
+	exit(EXIT_FAILURE);
+}
+
+static void check_no_sockets(struct list_head *head)
+{
+	if (!list_empty(head)) {
+		fprintf(stderr, "expected no sockets\n");
+		print_vsock_stats(stderr, head);
+		exit(1);
+	}
+}
+
+static void check_num_sockets(struct list_head *head, int expected)
+{
+	struct list_head *node;
+	int n = 0;
+
+	list_for_each(node, head)
+		n++;
+
+	if (n != expected) {
+		fprintf(stderr, "expected %d sockets, found %d\n",
+			expected, n);
+		print_vsock_stats(stderr, head);
+		exit(EXIT_FAILURE);
+	}
+}
+
+static void check_socket_state(struct vsock_stat *st, __u8 state)
+{
+	if (st->msg.vdiag_state != state) {
+		fprintf(stderr, "expected socket state %#x, got %#x\n",
+			state, st->msg.vdiag_state);
+		exit(EXIT_FAILURE);
+	}
+}
+
+static void send_req(int fd)
+{
+	struct sockaddr_nl nladdr = {
+		.nl_family = AF_NETLINK,
+	};
+	struct {
+		struct nlmsghdr nlh;
+		struct vsock_diag_req vreq;
+	} req = {
+		.nlh = {
+			.nlmsg_len = sizeof(req),
+			.nlmsg_type = SOCK_DIAG_BY_FAMILY,
+			.nlmsg_flags = NLM_F_REQUEST | NLM_F_DUMP,
+		},
+		.vreq = {
+			.sdiag_family = AF_VSOCK,
+			.vdiag_states = ~(__u32)0,
+		},
+	};
+	struct iovec iov = {
+		.iov_base = &req,
+		.iov_len = sizeof(req),
+	};
+	struct msghdr msg = {
+		.msg_name = &nladdr,
+		.msg_namelen = sizeof(nladdr),
+		.msg_iov = &iov,
+		.msg_iovlen = 1,
+	};
+
+	for (;;) {
+		if (sendmsg(fd, &msg, 0) < 0) {
+			if (errno == EINTR)
+				continue;
+
+			perror("sendmsg");
+			exit(EXIT_FAILURE);
+		}
+
+		return;
+	}
+}
+
+static ssize_t recv_resp(int fd, void *buf, size_t len)
+{
+	struct sockaddr_nl nladdr = {
+		.nl_family = AF_NETLINK,
+	};
+	struct iovec iov = {
+		.iov_base = buf,
+		.iov_len = len,
+	};
+	struct msghdr msg = {
+		.msg_name = &nladdr,
+		.msg_namelen = sizeof(nladdr),
+		.msg_iov = &iov,
+		.msg_iovlen = 1,
+	};
+	ssize_t ret;
+
+	do {
+		ret = recvmsg(fd, &msg, 0);
+	} while (ret < 0 && errno == EINTR);
+
+	if (ret < 0) {
+		perror("recvmsg");
+		exit(EXIT_FAILURE);
+	}
+
+	return ret;
+}
+
+static void add_vsock_stat(struct list_head *sockets,
+			   const struct vsock_diag_msg *resp)
+{
+	struct vsock_stat *st;
+
+	st = malloc(sizeof(*st));
+	if (!st) {
+		perror("malloc");
+		exit(EXIT_FAILURE);
+	}
+
+	st->msg = *resp;
+	list_add_tail(&st->list, sockets);
+}
+
+/*
+ * Read vsock stats into a list.
+ */
+static void read_vsock_stat(struct list_head *sockets)
+{
+	long buf[8192 / sizeof(long)];
+	int fd;
+
+	fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_SOCK_DIAG);
+	if (fd < 0) {
+		perror("socket");
+		exit(EXIT_FAILURE);
+	}
+
+	send_req(fd);
+
+	for (;;) {
+		const struct nlmsghdr *h;
+		ssize_t ret;
+
+		ret = recv_resp(fd, buf, sizeof(buf));
+		if (ret == 0)
+			goto done;
+		if (ret < sizeof(*h)) {
+			fprintf(stderr, "short read of %zd bytes\n", ret);
+			exit(EXIT_FAILURE);
+		}
+
+		h = (struct nlmsghdr *)buf;
+
+		while (NLMSG_OK(h, ret)) {
+			if (h->nlmsg_type == NLMSG_DONE)
+				goto done;
+
+			if (h->nlmsg_type == NLMSG_ERROR) {
+				const struct nlmsgerr *err = NLMSG_DATA(h);
+
+				if (h->nlmsg_len < NLMSG_LENGTH(sizeof(*err)))
+					fprintf(stderr, "NLMSG_ERROR\n");
+				else {
+					errno = -err->error;
+					perror("NLMSG_ERROR");
+				}
+
+				exit(EXIT_FAILURE);
+			}
+
+			if (h->nlmsg_type != SOCK_DIAG_BY_FAMILY) {
+				fprintf(stderr, "unexpected nlmsg_type %#x\n",
+					h->nlmsg_type);
+				exit(EXIT_FAILURE);
+			}
+			if (h->nlmsg_len <
+			    NLMSG_LENGTH(sizeof(struct vsock_diag_msg))) {
+				fprintf(stderr, "short vsock_diag_msg\n");
+				exit(EXIT_FAILURE);
+			}
+
+			add_vsock_stat(sockets, NLMSG_DATA(h));
+
+			h = NLMSG_NEXT(h, ret);
+		}
+	}
+
+done:
+	close(fd);
+}
+
+static void free_sock_stat(struct list_head *sockets)
+{
+	struct vsock_stat *st;
+	struct vsock_stat *next;
+
+	list_for_each_entry_safe(st, next, sockets, list)
+		free(st);
+}
+
+static void test_no_sockets(unsigned int peer_cid)
+{
+	LIST_HEAD(sockets);
+
+	read_vsock_stat(&sockets);
+
+	check_no_sockets(&sockets);
+
+	free_sock_stat(&sockets);
+}
+
+static void test_listen_socket_server(unsigned int peer_cid)
+{
+	union {
+		struct sockaddr sa;
+		struct sockaddr_vm svm;
+	} addr = {
+		.svm = {
+			.svm_family = AF_VSOCK,
+			.svm_port = 1234,
+			.svm_cid = VMADDR_CID_ANY,
+		},
+	};
+	LIST_HEAD(sockets);
+	struct vsock_stat *st;
+	int fd;
+
+	fd = socket(AF_VSOCK, SOCK_STREAM, 0);
+
+	if (bind(fd, &addr.sa, sizeof(addr.svm)) < 0) {
+		perror("bind");
+		exit(EXIT_FAILURE);
+	}
+
+	if (listen(fd, 1) < 0) {
+		perror("listen");
+		exit(EXIT_FAILURE);
+	}
+
+	read_vsock_stat(&sockets);
+
+	check_num_sockets(&sockets, 1);
+	st = find_vsock_stat(&sockets, fd);
+	check_socket_state(st, TCP_LISTEN);
+
+	close(fd);
+	free_sock_stat(&sockets);
+}
+
+static void test_connect_client(unsigned int peer_cid)
+{
+	union {
+		struct sockaddr sa;
+		struct sockaddr_vm svm;
+	} addr = {
+		.svm = {
+			.svm_family = AF_VSOCK,
+			.svm_port = 1234,
+			.svm_cid = peer_cid,
+		},
+	};
+	int fd;
+	int ret;
+	LIST_HEAD(sockets);
+	struct vsock_stat *st;
+
+	control_expectln("LISTENING");
+
+	fd = socket(AF_VSOCK, SOCK_STREAM, 0);
+
+	timeout_begin(TIMEOUT);
+	do {
+		ret = connect(fd, &addr.sa, sizeof(addr.svm));
+		timeout_check("connect");
+	} while (ret < 0 && errno == EINTR);
+	timeout_end();
+
+	if (ret < 0) {
+		perror("connect");
+		exit(EXIT_FAILURE);
+	}
+
+	read_vsock_stat(&sockets);
+
+	check_num_sockets(&sockets, 1);
+	st = find_vsock_stat(&sockets, fd);
+	check_socket_state(st, TCP_ESTABLISHED);
+
+	control_expectln("DONE");
+	control_writeln("DONE");
+
+	close(fd);
+	free_sock_stat(&sockets);
+}
+
+static void test_connect_server(unsigned int peer_cid)
+{
+	union {
+		struct sockaddr sa;
+		struct sockaddr_vm svm;
+	} addr = {
+		.svm = {
+			.svm_family = AF_VSOCK,
+			.svm_port = 1234,
+			.svm_cid = VMADDR_CID_ANY,
+		},
+	};
+	union {
+		struct sockaddr sa;
+		struct sockaddr_vm svm;
+	} clientaddr;
+	socklen_t clientaddr_len = sizeof(clientaddr.svm);
+	LIST_HEAD(sockets);
+	struct vsock_stat *st;
+	int fd;
+	int client_fd;
+
+	fd = socket(AF_VSOCK, SOCK_STREAM, 0);
+
+	if (bind(fd, &addr.sa, sizeof(addr.svm)) < 0) {
+		perror("bind");
+		exit(EXIT_FAILURE);
+	}
+
+	if (listen(fd, 1) < 0) {
+		perror("listen");
+		exit(EXIT_FAILURE);
+	}
+
+	control_writeln("LISTENING");
+
+	timeout_begin(TIMEOUT);
+	do {
+		client_fd = accept(fd, &clientaddr.sa, &clientaddr_len);
+		timeout_check("accept");
+	} while (client_fd < 0 && errno == EINTR);
+	timeout_end();
+
+	if (client_fd < 0) {
+		perror("accept");
+		exit(EXIT_FAILURE);
+	}
+	if (clientaddr.sa.sa_family != AF_VSOCK) {
+		fprintf(stderr, "expected AF_VSOCK from accept(2), got %d\n",
+			clientaddr.sa.sa_family);
+		exit(EXIT_FAILURE);
+	}
+	if (clientaddr.svm.svm_cid != peer_cid) {
+		fprintf(stderr, "expected peer CID %u from accept(2), got %u\n",
+			peer_cid, clientaddr.svm.svm_cid);
+		exit(EXIT_FAILURE);
+	}
+
+	read_vsock_stat(&sockets);
+
+	check_num_sockets(&sockets, 2);
+	find_vsock_stat(&sockets, fd);
+	st = find_vsock_stat(&sockets, client_fd);
+	check_socket_state(st, TCP_ESTABLISHED);
+
+	control_writeln("DONE");
+	control_expectln("DONE");
+
+	close(client_fd);
+	close(fd);
+	free_sock_stat(&sockets);
+}
+
+static struct {
+	const char *name;
+	void (*run_client)(unsigned int peer_cid);
+	void (*run_server)(unsigned int peer_cid);
+} test_cases[] = {
+	{
+		.name = "No sockets",
+		.run_server = test_no_sockets,
+	},
+	{
+		.name = "Listen socket",
+		.run_server = test_listen_socket_server,
+	},
+	{
+		.name = "Connect",
+		.run_client = test_connect_client,
+		.run_server = test_connect_server,
+	},
+	{},
+};
+
+static void init_signals(void)
+{
+	struct sigaction act = {
+		.sa_handler = sigalrm,
+	};
+
+	sigaction(SIGALRM, &act, NULL);
+	signal(SIGPIPE, SIG_IGN);
+}
+
+static unsigned int parse_cid(const char *str)
+{
+	char *endptr = NULL;
+	unsigned long int n;
+
+	errno = 0;
+	n = strtoul(str, &endptr, 10);
+	if (errno || *endptr != '\0') {
+		fprintf(stderr, "malformed CID \"%s\"\n", str);
+		exit(EXIT_FAILURE);
+	}
+	return n;
+}
+
+static const char optstring[] = "";
+static const struct option longopts[] = {
+	{
+		.name = "control-host",
+		.has_arg = required_argument,
+		.val = 'H',
+	},
+	{
+		.name = "control-port",
+		.has_arg = required_argument,
+		.val = 'P',
+	},
+	{
+		.name = "mode",
+		.has_arg = required_argument,
+		.val = 'm',
+	},
+	{
+		.name = "peer-cid",
+		.has_arg = required_argument,
+		.val = 'p',
+	},
+	{
+		.name = "help",
+		.has_arg = no_argument,
+		.val = '?',
+	},
+	{},
+};
+
+static void usage(void)
+{
+	fprintf(stderr, "Usage: vsock_diag_test [--help] [--control-host=<host>] --control-port=<port> --mode=client|server --peer-cid=<cid>\n"
+		"\n"
+		"  Server: vsock_diag_test --control-port=1234 --mode=server --peer-cid=3\n"
+		"  Client: vsock_diag_test --control-host=192.168.0.1 --control-port=1234 --mode=client --peer-cid=2\n"
+		"\n"
+		"Run vsock_diag.ko tests.  Must be launched in both\n"
+		"guest and host.  One side must use --mode=client and\n"
+		"the other side must use --mode=server.\n"
+		"\n"
+		"A TCP control socket connection is used to coordinate tests\n"
+		"between the client and the server.  The server requires a\n"
+		"listen address and the client requires an address to\n"
+		"connect to.\n"
+		"\n"
+		"The CID of the other side must be given with --peer-cid=<cid>.\n");
+	exit(EXIT_FAILURE);
+}
+
+int main(int argc, char **argv)
+{
+	const char *control_host = NULL;
+	const char *control_port = NULL;
+	int mode = TEST_MODE_UNSET;
+	unsigned int peer_cid = VMADDR_CID_ANY;
+	int i;
+
+	init_signals();
+
+	for (;;) {
+		int opt = getopt_long(argc, argv, optstring, longopts, NULL);
+
+		if (opt == -1)
+			break;
+
+		switch (opt) {
+		case 'H':
+			control_host = optarg;
+			break;
+		case 'm':
+			if (strcmp(optarg, "client") == 0)
+				mode = TEST_MODE_CLIENT;
+			else if (strcmp(optarg, "server") == 0)
+				mode = TEST_MODE_SERVER;
+			else {
+				fprintf(stderr, "--mode must be \"client\" or \"server\"\n");
+				return EXIT_FAILURE;
+			}
+			break;
+		case 'p':
+			peer_cid = parse_cid(optarg);
+			break;
+		case 'P':
+			control_port = optarg;
+			break;
+		case '?':
+		default:
+			usage();
+		}
+	}
+
+	if (!control_port)
+		usage();
+	if (mode == TEST_MODE_UNSET)
+		usage();
+	if (peer_cid == VMADDR_CID_ANY)
+		usage();
+
+	if (!control_host) {
+		if (mode != TEST_MODE_SERVER)
+			usage();
+		control_host = "0.0.0.0";
+	}
+
+	control_init(control_host, control_port, mode == TEST_MODE_SERVER);
+
+	for (i = 0; test_cases[i].name; i++) {
+		void (*run)(unsigned int peer_cid);
+
+		printf("%s...", test_cases[i].name);
+		fflush(stdout);
+
+		if (mode == TEST_MODE_CLIENT)
+			run = test_cases[i].run_client;
+		else
+			run = test_cases[i].run_server;
+
+		if (run)
+			run(peer_cid);
+
+		printf("ok\n");
+	}
+
+	control_cleanup();
+	return EXIT_SUCCESS;
+}