Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts were simply overlapping changes.  In the net/ipv4/route.c
case the code had simply moved around a little bit and the same fix
was made in both 'net' and 'net-next'.

In the net/sched/sch_generic.c case a fix in 'net' happened at
the same time that a new argument was added to qdisc_hash_add().

Signed-off-by: David S. Miller <davem@davemloft.net>

5 files changed, 27 insertions, 18 deletions

diff --git a/tools/perf/util/annotate.c b/tools/perf/util/annotate.c
index 273f21fa32b5..7aa57225cbf7 100644
--- a/tools/perf/util/annotate.c
+++ b/tools/perf/util/annotate.c
@@ -130,6 +130,12 @@ static struct arch architectures[] = {
 		.name = "powerpc",
 		.init = powerpc__annotate_init,
 	},
+	{
+		.name = "s390",
+		.objdump =  {
+			.comment_char = '#',
+		},
+	},
 };
 
 static void ins__delete(struct ins_operands *ops)
diff --git a/tools/power/cpupower/utils/helpers/cpuid.c b/tools/power/cpupower/utils/helpers/cpuid.c
index 93b0aa74ca03..39c2c7d067bb 100644
--- a/tools/power/cpupower/utils/helpers/cpuid.c
+++ b/tools/power/cpupower/utils/helpers/cpuid.c
@@ -156,6 +156,7 @@ out:
 					 */
 			case 0x2C:	/* Westmere EP - Gulftown */
 				cpu_info->caps |= CPUPOWER_CAP_HAS_TURBO_RATIO;
+				break;
 			case 0x2A:	/* SNB */
 			case 0x2D:	/* SNB Xeon */
 			case 0x3A:	/* IVB */
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index fedca3285326..ccf2a69365cc 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -100,6 +100,8 @@ The system configuration dump (if --quiet is not used) is followed by statistics
 \fBCPU%c1, CPU%c3, CPU%c6, CPU%c7\fP show the percentage residency in hardware core idle states.  These numbers are from hardware residency counters.
 \fBCoreTmp\fP Degrees Celsius reported by the per-core Digital Thermal Sensor.
 \fBPkgTtmp\fP Degrees Celsius reported by the per-package Package Thermal Monitor.
+\fBGFX%rc6\fP The percentage of time the GPU is in the "render C6" state, rc6, during the measurement interval. From /sys/class/drm/card0/power/rc6_residency_ms.
+\fBGFXMHz\fP Instantaneous snapshot of what sysfs presents at the end of the measurement interval. From /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz.
 \fBPkg%pc2, Pkg%pc3, Pkg%pc6, Pkg%pc7\fP percentage residency in hardware package idle states.  These numbers are from hardware residency counters.
 \fBPkgWatt\fP Watts consumed by the whole package.
 \fBCorWatt\fP Watts consumed by the core part of the package.
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 828dccd3f01e..b11294730771 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -1142,7 +1142,7 @@ delta_thread(struct thread_data *new, struct thread_data *old,
 		 * it is possible for mperf's non-halted cycles + idle states
 		 * to exceed TSC's all cycles: show c1 = 0% in that case.
 		 */
-		if ((old->mperf + core_delta->c3 + core_delta->c6 + core_delta->c7) > old->tsc)
+		if ((old->mperf + core_delta->c3 + core_delta->c6 + core_delta->c7) > (old->tsc * tsc_tweak))
 			old->c1 = 0;
 		else {
 			/* normal case, derive c1 */
@@ -2485,8 +2485,10 @@ int snapshot_gfx_mhz(void)
 
 	if (fp == NULL)
 		fp = fopen_or_die("/sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz", "r");
-	else
+	else {
 		rewind(fp);
+		fflush(fp);
+	}
 
 	retval = fscanf(fp, "%d", &gfx_cur_mhz);
 	if (retval != 1)
@@ -3111,7 +3113,7 @@ int print_hwp(struct thread_data *t, struct core_data *c, struct pkg_data *p)
 		return 0;
 
 	fprintf(outf, "cpu%d: MSR_HWP_CAPABILITIES: 0x%08llx "
-			"(high 0x%x guar 0x%x eff 0x%x low 0x%x)\n",
+			"(high %d guar %d eff %d low %d)\n",
 			cpu, msr,
 			(unsigned int)HWP_HIGHEST_PERF(msr),
 			(unsigned int)HWP_GUARANTEED_PERF(msr),
@@ -3122,7 +3124,7 @@ int print_hwp(struct thread_data *t, struct core_data *c, struct pkg_data *p)
 		return 0;
 
 	fprintf(outf, "cpu%d: MSR_HWP_REQUEST: 0x%08llx "
-			"(min 0x%x max 0x%x des 0x%x epp 0x%x window 0x%x pkg 0x%x)\n",
+			"(min %d max %d des %d epp 0x%x window 0x%x pkg 0x%x)\n",
 			cpu, msr,
 			(unsigned int)(((msr) >> 0) & 0xff),
 			(unsigned int)(((msr) >> 8) & 0xff),
@@ -3136,7 +3138,7 @@ int print_hwp(struct thread_data *t, struct core_data *c, struct pkg_data *p)
 			return 0;
 
 		fprintf(outf, "cpu%d: MSR_HWP_REQUEST_PKG: 0x%08llx "
-			"(min 0x%x max 0x%x des 0x%x epp 0x%x window 0x%x)\n",
+			"(min %d max %d des %d epp 0x%x window 0x%x)\n",
 			cpu, msr,
 			(unsigned int)(((msr) >> 0) & 0xff),
 			(unsigned int)(((msr) >> 8) & 0xff),
@@ -3353,17 +3355,19 @@ void rapl_probe(unsigned int family, unsigned int model)
 	case INTEL_FAM6_SKYLAKE_DESKTOP:	/* SKL */
 	case INTEL_FAM6_KABYLAKE_MOBILE:	/* KBL */
 	case INTEL_FAM6_KABYLAKE_DESKTOP:	/* KBL */
-		do_rapl = RAPL_PKG | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_PKG_PERF_STATUS | RAPL_PKG_POWER_INFO;
+		do_rapl = RAPL_PKG | RAPL_CORES | RAPL_CORE_POLICY | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_PKG_PERF_STATUS | RAPL_GFX | RAPL_PKG_POWER_INFO;
 		BIC_PRESENT(BIC_PKG__);
 		BIC_PRESENT(BIC_RAM__);
 		if (rapl_joules) {
 			BIC_PRESENT(BIC_Pkg_J);
 			BIC_PRESENT(BIC_Cor_J);
 			BIC_PRESENT(BIC_RAM_J);
+			BIC_PRESENT(BIC_GFX_J);
 		} else {
 			BIC_PRESENT(BIC_PkgWatt);
 			BIC_PRESENT(BIC_CorWatt);
 			BIC_PRESENT(BIC_RAMWatt);
+			BIC_PRESENT(BIC_GFXWatt);
 		}
 		break;
 	case INTEL_FAM6_HASWELL_X:	/* HSX */
@@ -3478,7 +3482,7 @@ void perf_limit_reasons_probe(unsigned int family, unsigned int model)
 int print_thermal(struct thread_data *t, struct core_data *c, struct pkg_data *p)
 {
 	unsigned long long msr;
-	unsigned int dts;
+	unsigned int dts, dts2;
 	int cpu;
 
 	if (!(do_dts || do_ptm))
@@ -3503,7 +3507,6 @@ int print_thermal(struct thread_data *t, struct core_data *c, struct pkg_data *p
 		fprintf(outf, "cpu%d: MSR_IA32_PACKAGE_THERM_STATUS: 0x%08llx (%d C)\n",
 			cpu, msr, tcc_activation_temp - dts);
 
-#ifdef	THERM_DEBUG
 		if (get_msr(cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT, &msr))
 			return 0;
 
@@ -3511,11 +3514,10 @@ int print_thermal(struct thread_data *t, struct core_data *c, struct pkg_data *p
 		dts2 = (msr >> 8) & 0x7F;
 		fprintf(outf, "cpu%d: MSR_IA32_PACKAGE_THERM_INTERRUPT: 0x%08llx (%d C, %d C)\n",
 			cpu, msr, tcc_activation_temp - dts, tcc_activation_temp - dts2);
-#endif
 	}
 
 
-	if (do_dts) {
+	if (do_dts && debug) {
 		unsigned int resolution;
 
 		if (get_msr(cpu, MSR_IA32_THERM_STATUS, &msr))
@@ -3526,7 +3528,6 @@ int print_thermal(struct thread_data *t, struct core_data *c, struct pkg_data *p
 		fprintf(outf, "cpu%d: MSR_IA32_THERM_STATUS: 0x%08llx (%d C +/- %d)\n",
 			cpu, msr, tcc_activation_temp - dts, resolution);
 
-#ifdef THERM_DEBUG
 		if (get_msr(cpu, MSR_IA32_THERM_INTERRUPT, &msr))
 			return 0;
 
@@ -3534,7 +3535,6 @@ int print_thermal(struct thread_data *t, struct core_data *c, struct pkg_data *p
 		dts2 = (msr >> 8) & 0x7F;
 		fprintf(outf, "cpu%d: MSR_IA32_THERM_INTERRUPT: 0x%08llx (%d C, %d C)\n",
 			cpu, msr, tcc_activation_temp - dts, tcc_activation_temp - dts2);
-#endif
 	}
 
 	return 0;
@@ -4578,7 +4578,7 @@ int get_and_dump_counters(void)
 }
 
 void print_version() {
-	fprintf(outf, "turbostat version 17.02.24"
+	fprintf(outf, "turbostat version 17.04.12"
 		" - Len Brown <lenb@kernel.org>\n");
 }
 
diff --git a/tools/testing/selftests/powerpc/Makefile b/tools/testing/selftests/powerpc/Makefile
index 1c5d0575802e..bf13fc2297aa 100644
--- a/tools/testing/selftests/powerpc/Makefile
+++ b/tools/testing/selftests/powerpc/Makefile
@@ -34,34 +34,34 @@ endif
 all: $(SUB_DIRS)
 
 $(SUB_DIRS):
-	BUILD_TARGET=$$OUTPUT/$@; mkdir -p $$BUILD_TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -k -C $@ all
+	BUILD_TARGET=$(OUTPUT)/$@; mkdir -p $$BUILD_TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -k -C $@ all
 
 include ../lib.mk
 
 override define RUN_TESTS
 	@for TARGET in $(SUB_DIRS); do \
-		BUILD_TARGET=$$OUTPUT/$$TARGET;	\
+		BUILD_TARGET=$(OUTPUT)/$$TARGET;	\
 		$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests;\
 	done;
 endef
 
 override define INSTALL_RULE
 	@for TARGET in $(SUB_DIRS); do \
-		BUILD_TARGET=$$OUTPUT/$$TARGET;	\
+		BUILD_TARGET=$(OUTPUT)/$$TARGET;	\
 		$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET install;\
 	done;
 endef
 
 override define EMIT_TESTS
 	@for TARGET in $(SUB_DIRS); do \
-		BUILD_TARGET=$$OUTPUT/$$TARGET;	\
+		BUILD_TARGET=$(OUTPUT)/$$TARGET;	\
 		$(MAKE) OUTPUT=$$BUILD_TARGET -s -C $$TARGET emit_tests;\
 	done;
 endef
 
 clean:
 	@for TARGET in $(SUB_DIRS); do \
-		BUILD_TARGET=$$OUTPUT/$$TARGET;	\
+		BUILD_TARGET=$(OUTPUT)/$$TARGET;	\
 		$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean; \
 	done;
 	rm -f tags