diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-07-05 12:31:59 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-07-05 12:31:59 -0700 |
| commit | 5518b69b76680a4f2df96b1deca260059db0c2de (patch) | |
| tree | f33cd1519c8efb4590500f2f9617400be233238c /tools | |
| parent | 8ad06e56dcbc1984ef0ff8f6e3c19982c5809f73 (diff) | |
| parent | 0e72582270c07850b92cac351c8b97d4f9c123b9 (diff) | |
| download | linux-5518b69b76680a4f2df96b1deca260059db0c2de.tar.bz2 | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
"Reasonably busy this cycle, but perhaps not as busy as in the 4.12
merge window:
1) Several optimizations for UDP processing under high load from
Paolo Abeni.
2) Support pacing internally in TCP when using the sch_fq packet
scheduler for this is not practical. From Eric Dumazet.
3) Support mutliple filter chains per qdisc, from Jiri Pirko.
4) Move to 1ms TCP timestamp clock, from Eric Dumazet.
5) Add batch dequeueing to vhost_net, from Jason Wang.
6) Flesh out more completely SCTP checksum offload support, from
Davide Caratti.
7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
Neira Ayuso, and Matthias Schiffer.
8) Add devlink support to nfp driver, from Simon Horman.
9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
Prabhu.
10) Add stack depth tracking to BPF verifier and use this information
in the various eBPF JITs. From Alexei Starovoitov.
11) Support XDP on qed device VFs, from Yuval Mintz.
12) Introduce BPF PROG ID for better introspection of installed BPF
programs. From Martin KaFai Lau.
13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.
14) For loads, allow narrower accesses in bpf verifier checking, from
Yonghong Song.
15) Support MIPS in the BPF selftests and samples infrastructure, the
MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
Daney.
16) Support kernel based TLS, from Dave Watson and others.
17) Remove completely DST garbage collection, from Wei Wang.
18) Allow installing TCP MD5 rules using prefixes, from Ivan
Delalande.
19) Add XDP support to Intel i40e driver, from Björn Töpel
20) Add support for TC flower offload in nfp driver, from Simon
Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
Kicinski, and Bert van Leeuwen.
21) IPSEC offloading support in mlx5, from Ilan Tayari.
22) Add HW PTP support to macb driver, from Rafal Ozieblo.
23) Networking refcount_t conversions, From Elena Reshetova.
24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
for tuning the TCP sockopt settings of a group of applications,
currently via CGROUPs"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
cxgb4: Support for get_ts_info ethtool method
cxgb4: Add PTP Hardware Clock (PHC) support
cxgb4: time stamping interface for PTP
nfp: default to chained metadata prepend format
nfp: remove legacy MAC address lookup
nfp: improve order of interfaces in breakout mode
net: macb: remove extraneous return when MACB_EXT_DESC is defined
bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
bpf: fix return in load_bpf_file
mpls: fix rtm policy in mpls_getroute
net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
...
Diffstat (limited to 'tools')
22 files changed, 2795 insertions, 71 deletions
diff --git a/tools/hv/bondvf.sh b/tools/hv/bondvf.sh index d85968cb1bf2..89b25068cd98 100755 --- a/tools/hv/bondvf.sh +++ b/tools/hv/bondvf.sh @@ -102,15 +102,30 @@ function create_bond_cfg_redhat { } function del_eth_cfg_ubuntu { - local fn=$cfgdir/interfaces + local mainfn=$cfgdir/interfaces + local fnlist=( $mainfn ) + + local dirlist=(`awk '/^[ \t]*source/{print $2}' $mainfn`) + + local i + for i in "${dirlist[@]}" + do + fnlist+=(`ls $i 2>/dev/null`) + done + local tmpfl=$(mktemp) local nic_start='^[ \t]*(auto|iface|mapping|allow-.*)[ \t]+'$1 local nic_end='^[ \t]*(auto|iface|mapping|allow-.*|source)' - awk "/$nic_end/{x=0} x{next} /$nic_start/{x=1;next} 1" $fn >$tmpfl + local fn + for fn in "${fnlist[@]}" + do + awk "/$nic_end/{x=0} x{next} /$nic_start/{x=1;next} 1" \ + $fn >$tmpfl - cp $tmpfl $fn + cp $tmpfl $fn + done rm $tmpfl } @@ -119,7 +134,6 @@ function create_eth_cfg_ubuntu { local fn=$cfgdir/interfaces del_eth_cfg_ubuntu $1 - echo $'\n'auto $1 >>$fn echo iface $1 inet manual >>$fn echo bond-master $2 >>$fn @@ -128,7 +142,10 @@ function create_eth_cfg_ubuntu { function create_eth_cfg_pri_ubuntu { local fn=$cfgdir/interfaces - create_eth_cfg_ubuntu $1 $2 + del_eth_cfg_ubuntu $1 + echo $'\n'allow-hotplug $1 >>$fn + echo iface $1 inet manual >>$fn + echo bond-master $2 >>$fn echo bond-primary $1 >>$fn } @@ -153,7 +170,11 @@ function create_eth_cfg_suse { } function create_eth_cfg_pri_suse { - create_eth_cfg_suse $1 + local fn=$cfgdir/ifcfg-$1 + + rm -f $fn + echo BOOTPROTO=none >>$fn + echo STARTMODE=hotplug >>$fn } function create_bond_cfg_suse { diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index 94dfa9def355..ce2988be4f0e 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -82,6 +82,11 @@ enum bpf_cmd { BPF_PROG_ATTACH, BPF_PROG_DETACH, BPF_PROG_TEST_RUN, + BPF_PROG_GET_NEXT_ID, + BPF_MAP_GET_NEXT_ID, + BPF_PROG_GET_FD_BY_ID, + BPF_MAP_GET_FD_BY_ID, + BPF_OBJ_GET_INFO_BY_FD, }; enum bpf_map_type { @@ -115,12 +120,14 @@ enum bpf_prog_type { BPF_PROG_TYPE_LWT_IN, BPF_PROG_TYPE_LWT_OUT, BPF_PROG_TYPE_LWT_XMIT, + BPF_PROG_TYPE_SOCK_OPS, }; enum bpf_attach_type { BPF_CGROUP_INET_INGRESS, BPF_CGROUP_INET_EGRESS, BPF_CGROUP_INET_SOCK_CREATE, + BPF_CGROUP_SOCK_OPS, __MAX_BPF_ATTACH_TYPE }; @@ -209,6 +216,21 @@ union bpf_attr { __u32 repeat; __u32 duration; } test; + + struct { /* anonymous struct used by BPF_*_GET_*_ID */ + union { + __u32 start_id; + __u32 prog_id; + __u32 map_id; + }; + __u32 next_id; + }; + + struct { /* anonymous struct used by BPF_OBJ_GET_INFO_BY_FD */ + __u32 bpf_fd; + __u32 info_len; + __aligned_u64 info; + } info; } __attribute__((aligned(8))); /* BPF helper function descriptions: @@ -313,8 +335,11 @@ union bpf_attr { * @flags: room for future extensions * Return: 0 on success or negative error * - * u64 bpf_perf_event_read(&map, index) - * Return: Number events read or error code + * u64 bpf_perf_event_read(map, flags) + * read perf event counter value + * @map: pointer to perf_event_array map + * @flags: index of event in the map or bitmask flags + * Return: value of perf event counter read or error code * * int bpf_redirect(ifindex, flags) * redirect to another netdev @@ -328,11 +353,11 @@ union bpf_attr { * @skb: pointer to skb * Return: realm if != 0 * - * int bpf_perf_event_output(ctx, map, index, data, size) + * int bpf_perf_event_output(ctx, map, flags, data, size) * output perf raw sample * @ctx: struct pt_regs* * @map: pointer to perf_event_array map - * @index: index of event in the map + * @flags: index of event in the map or bitmask flags * @data: data on stack to be output as raw data * @size: size of data * Return: 0 on success or negative error @@ -490,6 +515,30 @@ union bpf_attr { * Get the owner uid of the socket stored inside sk_buff. * @skb: pointer to skb * Return: uid of the socket owner on success or overflowuid if failed. + * + * u32 bpf_set_hash(skb, hash) + * Set full skb->hash. + * @skb: pointer to skb + * @hash: hash to set + * + * int bpf_setsockopt(bpf_socket, level, optname, optval, optlen) + * Calls setsockopt. Not all opts are available, only those with + * integer optvals plus TCP_CONGESTION. + * Supported levels: SOL_SOCKET and IPROTO_TCP + * @bpf_socket: pointer to bpf_socket + * @level: SOL_SOCKET or IPROTO_TCP + * @optname: option name + * @optval: pointer to option value + * @optlen: length of optval in byes + * Return: 0 or negative error + * + * int bpf_skb_adjust_room(skb, len_diff, mode, flags) + * Grow or shrink room in sk_buff. + * @skb: pointer to skb + * @len_diff: (signed) amount of room to grow/shrink + * @mode: operation mode (enum bpf_adj_room_mode) + * @flags: reserved for future use + * Return: 0 on success or negative error code */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -539,7 +588,10 @@ union bpf_attr { FN(xdp_adjust_head), \ FN(probe_read_str), \ FN(get_socket_cookie), \ - FN(get_socket_uid), + FN(get_socket_uid), \ + FN(set_hash), \ + FN(setsockopt), \ + FN(skb_adjust_room), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call @@ -589,6 +641,11 @@ enum bpf_func_id { /* BPF_FUNC_perf_event_output for sk_buff input context. */ #define BPF_F_CTXLEN_MASK (0xfffffULL << 32) +/* Mode for BPF_FUNC_skb_adjust_room helper. */ +enum bpf_adj_room_mode { + BPF_ADJ_ROOM_NET_OPTS, +}; + /* user accessible mirror of in-kernel sk_buff. * new fields can only be added to the end of this structure */ @@ -670,4 +727,75 @@ struct xdp_md { __u32 data_end; }; +#define BPF_TAG_SIZE 8 + +struct bpf_prog_info { + __u32 type; + __u32 id; + __u8 tag[BPF_TAG_SIZE]; + __u32 jited_prog_len; + __u32 xlated_prog_len; + __aligned_u64 jited_prog_insns; + __aligned_u64 xlated_prog_insns; +} __attribute__((aligned(8))); + +struct bpf_map_info { + __u32 type; + __u32 id; + __u32 key_size; + __u32 value_size; + __u32 max_entries; + __u32 map_flags; +} __attribute__((aligned(8))); + +/* User bpf_sock_ops struct to access socket values and specify request ops + * and their replies. + * New fields can only be added at the end of this structure + */ +struct bpf_sock_ops { + __u32 op; + union { + __u32 reply; + __u32 replylong[4]; + }; + __u32 family; + __u32 remote_ip4; + __u32 local_ip4; + __u32 remote_ip6[4]; + __u32 local_ip6[4]; + __u32 remote_port; + __u32 local_port; +}; + +/* List of known BPF sock_ops operators. + * New entries can only be added at the end + */ +enum { + BPF_SOCK_OPS_VOID, + BPF_SOCK_OPS_TIMEOUT_INIT, /* Should return SYN-RTO value to use or + * -1 if default value should be used + */ + BPF_SOCK_OPS_RWND_INIT, /* Should return initial advertized + * window (in packets) or -1 if default + * value should be used + */ + BPF_SOCK_OPS_TCP_CONNECT_CB, /* Calls BPF program right before an + * active connection is initialized + */ + BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB, /* Calls BPF program when an + * active connection is + * established + */ + BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB, /* Calls BPF program when a + * passive connection is + * established + */ + BPF_SOCK_OPS_NEEDS_ECN, /* If connection's congestion control + * needs ECN + */ +}; + +#define TCP_BPF_IW 1001 /* Set TCP initial congestion window */ +#define TCP_BPF_SNDCWND_CLAMP 1002 /* Set sndcwnd_clamp */ + #endif /* _UAPI__LINUX_BPF_H__ */ diff --git a/tools/lib/bpf/bpf.c b/tools/lib/bpf/bpf.c index 6e178987af8e..7e0405e1651d 100644 --- a/tools/lib/bpf/bpf.c +++ b/tools/lib/bpf/bpf.c @@ -257,3 +257,71 @@ int bpf_prog_test_run(int prog_fd, int repeat, void *data, __u32 size, *duration = attr.test.duration; return ret; } + +int bpf_prog_get_next_id(__u32 start_id, __u32 *next_id) +{ + union bpf_attr attr; + int err; + + bzero(&attr, sizeof(attr)); + attr.start_id = start_id; + + err = sys_bpf(BPF_PROG_GET_NEXT_ID, &attr, sizeof(attr)); + if (!err) + *next_id = attr.next_id; + + return err; +} + +int bpf_map_get_next_id(__u32 start_id, __u32 *next_id) +{ + union bpf_attr attr; + int err; + + bzero(&attr, sizeof(attr)); + attr.start_id = start_id; + + err = sys_bpf(BPF_MAP_GET_NEXT_ID, &attr, sizeof(attr)); + if (!err) + *next_id = attr.next_id; + + return err; +} + +int bpf_prog_get_fd_by_id(__u32 id) +{ + union bpf_attr attr; + + bzero(&attr, sizeof(attr)); + attr.prog_id = id; + + return sys_bpf(BPF_PROG_GET_FD_BY_ID, &attr, sizeof(attr)); +} + +int bpf_map_get_fd_by_id(__u32 id) +{ + union bpf_attr attr; + + bzero(&attr, sizeof(attr)); + attr.map_id = id; + + return sys_bpf(BPF_MAP_GET_FD_BY_ID, &attr, sizeof(attr)); +} + +int bpf_obj_get_info_by_fd(int prog_fd, void *info, __u32 *info_len) +{ + union bpf_attr attr; + int err; + + bzero(&attr, sizeof(attr)); + bzero(info, *info_len); + attr.info.bpf_fd = prog_fd; + attr.info.info_len = *info_len; + attr.info.info = ptr_to_u64(info); + + err = sys_bpf(BPF_OBJ_GET_INFO_BY_FD, &attr, sizeof(attr)); + if (!err) + *info_len = attr.info.info_len; + + return err; +} diff --git a/tools/lib/bpf/bpf.h b/tools/lib/bpf/bpf.h index 972bd8333eb7..16de44a14b48 100644 --- a/tools/lib/bpf/bpf.h +++ b/tools/lib/bpf/bpf.h @@ -54,5 +54,10 @@ int bpf_prog_detach(int attachable_fd, enum bpf_attach_type type); int bpf_prog_test_run(int prog_fd, int repeat, void *data, __u32 size, void *data_out, __u32 *size_out, __u32 *retval, __u32 *duration); +int bpf_prog_get_next_id(__u32 start_id, __u32 *next_id); +int bpf_map_get_next_id(__u32 start_id, __u32 *next_id); +int bpf_prog_get_fd_by_id(__u32 id); +int bpf_map_get_fd_by_id(__u32 id); +int bpf_obj_get_info_by_fd(int prog_fd, void *info, __u32 *info_len); #endif diff --git a/tools/net/bpf_jit_disasm.c b/tools/net/bpf_jit_disasm.c index ad572e6cdbd0..422d9abd666a 100644 --- a/tools/net/bpf_jit_disasm.c +++ b/tools/net/bpf_jit_disasm.c @@ -159,8 +159,8 @@ static void put_log_buff(char *buff) free(buff); } -static unsigned int get_last_jit_image(char *haystack, size_t hlen, - uint8_t *image, size_t ilen) +static uint8_t *get_last_jit_image(char *haystack, size_t hlen, + unsigned int *ilen) { char *ptr, *pptr, *tmp; off_t off = 0; @@ -168,9 +168,10 @@ static unsigned int get_last_jit_image(char *haystack, size_t hlen, regmatch_t pmatch[1]; unsigned long base; regex_t regex; + uint8_t *image; if (hlen == 0) - return 0; + return NULL; ret = regcomp(®ex, "flen=[[:alnum:]]+ proglen=[[:digit:]]+ " "pass=[[:digit:]]+ image=[[:xdigit:]]+", REG_EXTENDED); @@ -194,11 +195,22 @@ static unsigned int get_last_jit_image(char *haystack, size_t hlen, &flen, &proglen, &pass, &base); if (ret != 4) { regfree(®ex); - return 0; + return NULL; + } + if (proglen > 1000000) { + printf("proglen of %d too big, stopping\n", proglen); + return NULL; } + image = malloc(proglen); + if (!image) { + printf("Out of memory\n"); + return NULL; + } + memset(image, 0, proglen); + tmp = ptr = haystack + off; - while ((ptr = strtok(tmp, "\n")) != NULL && ulen < ilen) { + while ((ptr = strtok(tmp, "\n")) != NULL && ulen < proglen) { tmp = NULL; if (!strstr(ptr, "JIT code")) continue; @@ -208,10 +220,12 @@ static unsigned int get_last_jit_image(char *haystack, size_t hlen, ptr = pptr; do { image[ulen++] = (uint8_t) strtoul(pptr, &pptr, 16); - if (ptr == pptr || ulen >= ilen) { + if (ptr == pptr) { ulen--; break; } + if (ulen >= proglen) + break; ptr = pptr; } while (1); } @@ -222,7 +236,8 @@ static unsigned int get_last_jit_image(char *haystack, size_t hlen, printf("%lx + <x>:\n", base); regfree(®ex); - return ulen; + *ilen = ulen; + return image; } static void usage(void) @@ -237,12 +252,12 @@ static void usage(void) int main(int argc, char **argv) { unsigned int len, klen, opt, opcodes = 0; - static uint8_t image[32768]; char *kbuff, *file = NULL; char *ofile = NULL; int ofd; ssize_t nr; uint8_t *pos; + uint8_t *image = NULL; while ((opt = getopt(argc, argv, "of:O:")) != -1) { switch (opt) { @@ -262,7 +277,6 @@ int main(int argc, char **argv) } bfd_init(); - memset(image, 0, sizeof(image)); kbuff = get_log_buff(file, &klen); if (!kbuff) { @@ -270,8 +284,8 @@ int main(int argc, char **argv) return -1; } - len = get_last_jit_image(kbuff, klen, image, sizeof(image)); - if (len <= 0) { + image = get_last_jit_image(kbuff, klen, &len); + if (!image) { fprintf(stderr, "No JIT image found!\n"); goto done; } @@ -301,5 +315,6 @@ int main(int argc, char **argv) done: put_log_buff(kbuff); + free(image); return 0; } diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index f389b02d43a0..2ca51a8a588c 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -14,7 +14,8 @@ LDLIBS += -lcap -lelf TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test_progs \ test_align -TEST_GEN_FILES = test_pkt_access.o test_xdp.o test_l4lb.o test_tcp_estats.o +TEST_GEN_FILES = test_pkt_access.o test_xdp.o test_l4lb.o test_tcp_estats.o test_obj_id.o \ + test_pkt_md_access.o TEST_PROGS := test_kmod.sh diff --git a/tools/testing/selftests/bpf/test_align.c b/tools/testing/selftests/bpf/test_align.c index 9644d4e069de..bccebd935907 100644 --- a/tools/testing/selftests/bpf/test_align.c +++ b/tools/testing/selftests/bpf/test_align.c @@ -9,6 +9,8 @@ #include <stddef.h> #include <stdbool.h> +#include <sys/resource.h> + #include <linux/unistd.h> #include <linux/filter.h> #include <linux/bpf_perf_event.h> @@ -426,12 +428,15 @@ static int do_test(unsigned int from, unsigned int to) } printf("Results: %d pass %d fail\n", all_pass, all_fail); - return 0; + return all_fail ? EXIT_FAILURE : EXIT_SUCCESS; } int main(int argc, char **argv) { unsigned int from = 0, to = ARRAY_SIZE(tests); + struct rlimit rinf = { RLIM_INFINITY, RLIM_INFINITY }; + + setrlimit(RLIMIT_MEMLOCK, &rinf); if (argc == 3) { unsigned int l = atoi(argv[argc - 2]); diff --git a/tools/testing/selftests/bpf/test_maps.c b/tools/testing/selftests/bpf/test_maps.c index 93314524de0d..79601c81e169 100644 --- a/tools/testing/selftests/bpf/test_maps.c +++ b/tools/testing/selftests/bpf/test_maps.c @@ -239,6 +239,54 @@ static void test_hashmap_percpu(int task, void *data) close(fd); } +static void test_hashmap_walk(int task, void *data) +{ + int fd, i, max_entries = 100000; + long long key, value, next_key; + bool next_key_valid = true; + + fd = bpf_create_map(BPF_MAP_TYPE_HASH, sizeof(key), sizeof(value), + max_entries, map_flags); + if (fd < 0) { + printf("Failed to create hashmap '%s'!\n", strerror(errno)); + exit(1); + } + + for (i = 0; i < max_entries; i++) { + key = i; value = key; + assert(bpf_map_update_elem(fd, &key, &value, BPF_NOEXIST) == 0); + } + + for (i = 0; bpf_map_get_next_key(fd, !i ? NULL : &key, + &next_key) == 0; i++) { + key = next_key; + assert(bpf_map_lookup_elem(fd, &key, &value) == 0); + } + + assert(i == max_entries); + + assert(bpf_map_get_next_key(fd, NULL, &key) == 0); + for (i = 0; next_key_valid; i++) { + next_key_valid = bpf_map_get_next_key(fd, &key, &next_key) == 0; + assert(bpf_map_lookup_elem(fd, &key, &value) == 0); + value++; + assert(bpf_map_update_elem(fd, &key, &value, BPF_EXIST) == 0); + key = next_key; + } + + assert(i == max_entries); + + for (i = 0; bpf_map_get_next_key(fd, !i ? NULL : &key, + &next_key) == 0; i++) { + key = next_key; + assert(bpf_map_lookup_elem(fd, &key, &value) == 0); + assert(value - 1 == key); + } + + assert(i == max_entries); + close(fd); +} + static void test_arraymap(int task, void *data) { int key, next_key, fd; @@ -464,6 +512,7 @@ static void test_map_stress(void) run_parallel(100, test_hashmap, NULL); run_parallel(100, test_hashmap_percpu, NULL); run_parallel(100, test_hashmap_sizes, NULL); + run_parallel(100, test_hashmap_walk, NULL); run_parallel(100, test_arraymap, NULL); run_parallel(100, test_arraymap_percpu, NULL); @@ -549,6 +598,7 @@ static void run_all_tests(void) { test_hashmap(0, NULL); test_hashmap_percpu(0, NULL); + test_hashmap_walk(0, NULL); test_arraymap(0, NULL); test_arraymap_percpu(0, NULL); diff --git a/tools/testing/selftests/bpf/test_obj_id.c b/tools/testing/selftests/bpf/test_obj_id.c new file mode 100644 index 000000000000..880d2963b472 --- /dev/null +++ b/tools/testing/selftests/bpf/test_obj_id.c @@ -0,0 +1,35 @@ +/* Copyright (c) 2017 Facebook + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public + * License as published by the Free Software Foundation. + */ +#include <stddef.h> +#include <linux/bpf.h> +#include <linux/pkt_cls.h> +#include "bpf_helpers.h" + +/* It is a dumb bpf program such that it must have no + * issue to be loaded since testing the verifier is + * not the focus here. + */ + +int _version SEC("version") = 1; + +struct bpf_map_def SEC("maps") test_map_id = { + .type = BPF_MAP_TYPE_ARRAY, + .key_size = sizeof(__u32), + .value_size = sizeof(__u64), + .max_entries = 1, +}; + +SEC("test_obj_id_dummy") +int test_obj_id(struct __sk_buff *skb) +{ + __u32 key = 0; + __u64 *value; + + value = bpf_map_lookup_elem(&test_map_id, &key); + + return TC_ACT_OK; +} diff --git a/tools/testing/selftests/bpf/test_pkt_md_access.c b/tools/testing/selftests/bpf/test_pkt_md_access.c new file mode 100644 index 000000000000..71729d47eb85 --- /dev/null +++ b/tools/testing/selftests/bpf/test_pkt_md_access.c @@ -0,0 +1,35 @@ +/* Copyright (c) 2017 Facebook + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public + * License as published by the Free Software Foundation. + */ +#include <stddef.h> +#include <string.h> +#include <linux/bpf.h> +#include <linux/pkt_cls.h> +#include "bpf_helpers.h" + +int _version SEC("version") = 1; + +#define TEST_FIELD(TYPE, FIELD, MASK) \ + { \ + TYPE tmp = *(volatile TYPE *)&skb->FIELD; \ + if (tmp != ((*(volatile __u32 *)&skb->FIELD) & MASK)) \ + return TC_ACT_SHOT; \ + } + +SEC("test1") +int process(struct __sk_buff *skb) +{ + TEST_FIELD(__u8, len, 0xFF); + TEST_FIELD(__u16, len, 0xFFFF); + TEST_FIELD(__u32, len, 0xFFFFFFFF); + TEST_FIELD(__u16, protocol, 0xFFFF); + TEST_FIELD(__u32, protocol, 0xFFFFFFFF); + TEST_FIELD(__u8, hash, 0xFF); + TEST_FIELD(__u16, hash, 0xFFFF); + TEST_FIELD(__u32, hash, 0xFFFFFFFF); + + return TC_ACT_OK; +} diff --git a/tools/testing/selftests/bpf/test_progs.c b/tools/testing/selftests/bpf/test_progs.c index b59f5ed4ae40..5855cd3d3d45 100644 --- a/tools/testing/selftests/bpf/test_progs.c +++ b/tools/testing/selftests/bpf/test_progs.c @@ -22,6 +22,8 @@ typedef __u16 __sum16; #include <sys/wait.h> #include <sys/resource.h> +#include <sys/types.h> +#include <fcntl.h> #include <linux/bpf.h> #include <linux/err.h> @@ -70,6 +72,7 @@ static struct { pass_cnt++; \ printf("%s:PASS:%s %d nsec\n", __func__, tag, duration);\ } \ + __ret; \ }) static int bpf_prog_load(const char *file, enum bpf_prog_type type, @@ -283,6 +286,224 @@ static void test_tcp_estats(void) bpf_object__close(obj); } +static inline __u64 ptr_to_u64(const void *ptr) +{ + return (__u64) (unsigned long) ptr; +} + +static void test_bpf_obj_id(void) +{ + const __u64 array_magic_value = 0xfaceb00c; + const __u32 array_key = 0; + const int nr_iters = 2; + const char *file = "./test_obj_id.o"; + const char *jit_sysctl = "/proc/sys/net/core/bpf_jit_enable"; + + struct bpf_object *objs[nr_iters]; + int prog_fds[nr_iters], map_fds[nr_iters]; + /* +1 to test for the info_len returned by kernel */ + struct bpf_prog_info prog_infos[nr_iters + 1]; + struct bpf_map_info map_infos[nr_iters + 1]; + char jited_insns[128], xlated_insns[128]; + __u32 i, next_id, info_len, nr_id_found, duration = 0; + int sysctl_fd, jit_enabled = 0, err = 0; + __u64 array_value; + + sysctl_fd = open(jit_sysctl, 0, O_RDONLY); + if (sysctl_fd != -1) { + char tmpc; + + if (read(sysctl_fd, &tmpc, sizeof(tmpc)) == 1) + jit_enabled = (tmpc != '0'); + close(sysctl_fd); + } + + err = bpf_prog_get_fd_by_id(0); + CHECK(err >= 0 || errno != ENOENT, + "get-fd-by-notexist-prog-id", "err %d errno %d\n", err, errno); + + err = bpf_map_get_fd_by_id(0); + CHECK(err >= 0 || errno != ENOENT, + "get-fd-by-notexist-map-id", "err %d errno %d\n", err, errno); + + for (i = 0; i < nr_iters; i++) + objs[i] = NULL; + + /* Check bpf_obj_get_info_by_fd() */ + for (i = 0; i < nr_iters; i++) { + err = bpf_prog_load(file, BPF_PROG_TYPE_SOCKET_FILTER, + &objs[i], &prog_fds[i]); + /* test_obj_id.o is a dumb prog. It should never fail + * to load. + */ + assert(!err); + + /* Check getting prog info */ + info_len = sizeof(struct bpf_prog_info) * 2; + prog_infos[i].jited_prog_insns = ptr_to_u64(jited_insns); + prog_infos[i].jited_prog_len = sizeof(jited_insns); + prog_infos[i].xlated_prog_insns = ptr_to_u64(xlated_insns); + prog_infos[i].xlated_prog_len = sizeof(xlated_insns); + err = bpf_obj_get_info_by_fd(prog_fds[i], &prog_infos[i], + &info_len); + if (CHECK(err || + prog_infos[i].type != BPF_PROG_TYPE_SOCKET_FILTER || + info_len != sizeof(struct bpf_prog_info) || + (jit_enabled && !prog_infos[i].jited_prog_len) || + !prog_infos[i].xlated_prog_len, + "get-prog-info(fd)", + "err %d errno %d i %d type %d(%d) info_len %u(%lu) jit_enabled %d jited_prog_len %u xlated_prog_len %u\n", + err, errno, i, + prog_infos[i].type, BPF_PROG_TYPE_SOCKET_FILTER, + info_len, sizeof(struct bpf_prog_info), + jit_enabled, + prog_infos[i].jited_prog_len, + prog_infos[i].xlated_prog_len)) + goto done; + + map_fds[i] = bpf_find_map(__func__, objs[i], "test_map_id"); + assert(map_fds[i] >= 0); + err = bpf_map_update_elem(map_fds[i], &array_key, + &array_magic_value, 0); + assert(!err); + + /* Check getting map info */ + info_len = sizeof(struct bpf_map_info) * 2; + err = bpf_obj_get_info_by_fd(map_fds[i], &map_infos[i], + &info_len); + if (CHECK(err || + map_infos[i].type != BPF_MAP_TYPE_ARRAY || + map_infos[i].key_size != sizeof(__u32) || + map_infos[i].value_size != sizeof(__u64) || + map_infos[i].max_entries != 1 || + map_infos[i].map_flags != 0 || + info_len != sizeof(struct bpf_map_info), + "get-map-info(fd)", + "err %d errno %d type %d(%d) info_len %u(%lu) key_size %u value_size %u max_entries %u map_flags %X\n", + err, errno, + map_infos[i].type, BPF_MAP_TYPE_ARRAY, + info_len, sizeof(struct bpf_map_info), + map_infos[i].key_size, + map_infos[i].value_size, + map_infos[i].max_entries, + map_infos[i].map_flags)) + goto done; + } + + /* Check bpf_prog_get_next_id() */ + nr_id_found = 0; + next_id = 0; + while (!bpf_prog_get_next_id(next_id, &next_id)) { + struct bpf_prog_info prog_info; + int prog_fd; + + info_len = sizeof(prog_info); + + prog_fd = bpf_prog_get_fd_by_id(next_id); + if (prog_fd < 0 && errno == ENOENT) + /* The bpf_prog is in the dead row */ + continue; + if (CHECK(prog_fd < 0, "get-prog-fd(next_id)", + "prog_fd %d next_id %d errno %d\n", + prog_fd, next_id, errno)) + break; + + for (i = 0; i < nr_iters; i++) + if (prog_infos[i].id == next_id) + break; + + if (i == nr_iters) + continue; + + nr_id_found++; + + err = bpf_obj_get_info_by_fd(prog_fd, &prog_info, &info_len); + CHECK(err || info_len != sizeof(struct bpf_prog_info) || + memcmp(&prog_info, &prog_infos[i], info_len), + "get-prog-info(next_id->fd)", + "err %d errno %d info_len %u(%lu) memcmp %d\n", + err, errno, info_len, sizeof(struct bpf_prog_info), + memcmp(&prog_info, &prog_infos[i], info_len)); + + close(prog_fd); + } + CHECK(nr_id_found != nr_iters, + "check total prog id found by get_next_id", + "nr_id_found %u(%u)\n", + nr_id_found, nr_iters); + + /* Check bpf_map_get_next_id() */ + nr_id_found = 0; + next_id = 0; + while (!bpf_map_get_next_id(next_id, &next_id)) { + struct bpf_map_info map_info; + int map_fd; + + info_len = sizeof(map_info); + + map_fd = bpf_map_get_fd_by_id(next_id); + if (map_fd < 0 && errno == ENOENT) + /* The bpf_map is in the dead row */ + continue; + if (CHECK(map_fd < 0, "get-map-fd(next_id)", + "map_fd %d next_id %u errno %d\n", + map_fd, next_id, errno)) + break; + + for (i = 0; i < nr_iters; i++) + if (map_infos[i].id == next_id) + break; + + if (i == nr_iters) + continue; + + nr_id_found++; + + err = bpf_map_lookup_elem(map_fd, &array_key, &array_value); + assert(!err); + + err = bpf_obj_get_info_by_fd(map_fd, &map_info, &info_len); + CHECK(err || info_len != sizeof(struct bpf_map_info) || + memcmp(&map_info, &map_infos[i], info_len) || + array_value != array_magic_value, + "check get-map-info(next_id->fd)", + "err %d errno %d info_len %u(%lu) memcmp %d array_value %llu(%llu)\n", + err, errno, info_len, sizeof(struct bpf_map_info), + memcmp(&map_info, &map_infos[i], info_len), + array_value, array_magic_value); + + close(map_fd); + } + CHECK(nr_id_found != nr_iters, + "check total map id found by get_next_id", + "nr_id_found %u(%u)\n", + nr_id_found, nr_iters); + +done: + for (i = 0; i < nr_iters; i++) + bpf_object__close(objs[i]); +} + +static void test_pkt_md_access(void) +{ + const char *file = "./test_pkt_md_access.o"; + struct bpf_object *obj; + __u32 duration, retval; + int err, prog_fd; + + err = bpf_prog_load(file, BPF_PROG_TYPE_SCHED_CLS, &obj, &prog_fd); + if (err) + return; + + err = bpf_prog_test_run(prog_fd, 10, &pkt_v4, sizeof(pkt_v4), + NULL, NULL, &retval, &duration); + CHECK(err || retval, "", + "err %d errno %d retval %d duration %d\n", + err, errno, retval, duration); + + bpf_object__close(obj); +} + int main(void) { struct rlimit rinf = { RLIM_INFINITY, RLIM_INFINITY }; @@ -293,7 +514,9 @@ int main(void) test_xdp(); test_l4lb(); test_tcp_estats(); + test_bpf_obj_id(); + test_pkt_md_access(); printf("Summary: %d PASSED, %d FAILED\n", pass_cnt, error_cnt); - return 0; + return error_cnt ? EXIT_FAILURE : EXIT_SUCCESS; } diff --git a/tools/testing/selftests/bpf/test_verifier.c b/tools/testing/selftests/bpf/test_verifier.c index 0ff8c55c0464..404aec520812 100644 --- a/tools/testing/selftests/bpf/test_verifier.c +++ b/tools/testing/selftests/bpf/test_verifier.c @@ -1073,44 +1073,75 @@ static struct bpf_test tests[] = { .result = ACCEPT, }, { - "check cb access: byte, oob 1", + "__sk_buff->hash, offset 0, byte store not permitted", .insns = { BPF_MOV64_IMM(BPF_REG_0, 0), BPF_STX_MEM(BPF_B, BPF_REG_1, BPF_REG_0, - offsetof(struct __sk_buff, cb[4]) + 4), + offsetof(struct __sk_buff, hash)), BPF_EXIT_INSN(), }, .errstr = "invalid bpf_context access", .result = REJECT, }, { - "check cb access: byte, oob 2", + "__sk_buff->tc_index, offset 3, byte store not permitted", .insns = { BPF_MOV64_IMM(BPF_REG_0, 0), BPF_STX_MEM(BPF_B, BPF_REG_1, BPF_REG_0, - offsetof(struct __sk_buff, cb[0]) - 1), + offsetof(struct __sk_buff, tc_index) + 3), BPF_EXIT_INSN(), }, .errstr = "invalid bpf_context access", .result = REJECT, }, { - "check cb access: byte, oob 3", + "check skb->hash byte load permitted", .insns = { BPF_MOV64_IMM(BPF_REG_0, 0), +#ifdef __LITTLE_ENDIAN BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_1, - offsetof(struct __sk_buff, cb[4]) + 4), + offsetof(struct __sk_buff, hash)), +#else + BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_1, + offsetof(struct __sk_buff, hash) + 3), +#endif + BPF_EXIT_INSN(), + }, + .result = ACCEPT, + }, + { + "check skb->hash byte load not permitted 1", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_1, + offsetof(struct __sk_buff, hash) + 1), BPF_EXIT_INSN(), }, .errstr = "invalid bpf_context access", .result = REJECT, }, { - "check cb access: byte, oob 4", + "check skb->hash byte load not permitted 2", .insns = { BPF_MOV64_IMM(BPF_REG_0, 0), BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_1, - offsetof(struct __sk_buff, cb[0]) - 1), + offsetof(struct __sk_buff, hash) + 2), + BPF_EXIT_INSN(), + }, + .errstr = "invalid bpf_context access", + .result = REJECT, + }, + { + "check skb->hash byte load not permitted 3", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 0), +#ifdef __LITTLE_ENDIAN + BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_1, + offsetof(struct __sk_buff, hash) + 3), +#else + BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_1, + offsetof(struct __sk_buff, hash)), +#endif BPF_EXIT_INSN(), }, .errstr = "invalid bpf_context access", @@ -1188,44 +1219,53 @@ static struct bpf_test tests[] = { .result = REJECT, }, { - "check cb access: half, oob 1", + "check __sk_buff->hash, offset 0, half store not permitted", .insns = { BPF_MOV64_IMM(BPF_REG_0, 0), BPF_STX_MEM(BPF_H, BPF_REG_1, BPF_REG_0, - offsetof(struct __sk_buff, cb[4]) + 4), + offsetof(struct __sk_buff, hash)), BPF_EXIT_INSN(), }, .errstr = "invalid bpf_context access", .result = REJECT, }, { - "check cb access: half, oob 2", + "check __sk_buff->tc_index, offset 2, half store not permitted", .insns = { BPF_MOV64_IMM(BPF_REG_0, 0), BPF_STX_MEM(BPF_H, BPF_REG_1, BPF_REG_0, - offsetof(struct __sk_buff, cb[0]) - 2), + offsetof(struct __sk_buff, tc_index) + 2), BPF_EXIT_INSN(), }, .errstr = "invalid bpf_context access", .result = REJECT, }, { - "check cb access: half, oob 3", + "check skb->hash half load permitted", .insns = { BPF_MOV64_IMM(BPF_REG_0, 0), +#ifdef __LITTLE_ENDIAN BPF_LDX_MEM(BPF_H, BPF_REG_0, BPF_REG_1, - offsetof(struct __sk_buff, cb[4]) + 4), + offsetof(struct __sk_buff, hash)), +#else + BPF_LDX_MEM(BPF_H, BPF_REG_0, BPF_REG_1, + offsetof(struct __sk_buff, hash) + 2), +#endif BPF_EXIT_INSN(), }, - .errstr = "invalid bpf_context access", - .result = REJECT, + .result = ACCEPT, }, { - "check cb access: half, oob 4", + "check skb->hash half load not permitted", .insns = { BPF_MOV64_IMM(BPF_REG_0, 0), +#ifdef __LITTLE_ENDIAN + BPF_LDX_MEM(BPF_H, BPF_REG_0, BPF_REG_1, + offsetof(struct __sk_buff, hash) + 2), +#else BPF_LDX_MEM(BPF_H, BPF_REG_0, BPF_REG_1, - offsetof(struct __sk_buff, cb[0]) - 2), + offsetof(struct __sk_buff, hash)), +#endif BPF_EXIT_INSN(), }, .errstr = "invalid bpf_context access", @@ -1368,28 +1408,6 @@ static struct bpf_test tests[] = { "check cb access: double, oob 2", .insns = { BPF_MOV64_IMM(BPF_REG_0, 0), - BPF_STX_MEM(BPF_DW, BPF_REG_1, BPF_REG_0, - offsetof(struct __sk_buff, cb[4]) + 8), - BPF_EXIT_INSN(), - }, - .errstr = "invalid bpf_context access", - .result = REJECT, - }, - { - "check cb access: double, oob 3", - .insns = { - BPF_MOV64_IMM(BPF_REG_0, 0), - BPF_STX_MEM(BPF_DW, BPF_REG_1, BPF_REG_0, - offsetof(struct __sk_buff, cb[0]) - 8), - BPF_EXIT_INSN(), - }, - .errstr = "invalid bpf_context access", - .result = REJECT, - }, - { - "check cb access: double, oob 4", - .insns = { - BPF_MOV64_IMM(BPF_REG_0, 0), BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, offsetof(struct __sk_buff, cb[4])), BPF_EXIT_INSN(), @@ -1398,22 +1416,22 @@ static struct bpf_test tests[] = { .result = REJECT, }, { - "check cb access: double, oob 5", + "check __sk_buff->ifindex dw store not permitted", .insns = { BPF_MOV64_IMM(BPF_REG_0, 0), - BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, - offsetof(struct __sk_buff, cb[4]) + 8), + BPF_STX_MEM(BPF_DW, BPF_REG_1, BPF_REG_0, + offsetof(struct __sk_buff, ifindex)), BPF_EXIT_INSN(), }, .errstr = "invalid bpf_context access", .result = REJECT, }, { - "check cb access: double, oob 6", + "check __sk_buff->ifindex dw load not permitted", .insns = { BPF_MOV64_IMM(BPF_REG_0, 0), BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, - offsetof(struct __sk_buff, cb[0]) - 8), + offsetof(struct __sk_buff, ifindex)), BPF_EXIT_INSN(), }, .errstr = "invalid bpf_context access", @@ -2640,6 +2658,171 @@ static struct bpf_test tests[] = { .flags = F_LOAD_WITH_STRICT_ALIGNMENT, }, { + "direct packet access: test18 (imm += pkt_ptr, 1)", + .insns = { + BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, + offsetof(struct __sk_buff, data)), + BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, + offsetof(struct __sk_buff, data_end)), + BPF_MOV64_IMM(BPF_REG_0, 8), + BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_2), + BPF_JMP_REG(BPF_JGT, BPF_REG_0, BPF_REG_3, 1), + BPF_STX_MEM(BPF_B, BPF_REG_2, BPF_REG_2, 0), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .result = ACCEPT, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + }, + { + "direct packet access: test19 (imm += pkt_ptr, 2)", + .insns = { + BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, + offsetof(struct __sk_buff, data)), + BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, + offsetof(struct __sk_buff, data_end)), + BPF_MOV64_REG(BPF_REG_0, BPF_REG_2), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 8), + BPF_JMP_REG(BPF_JGT, BPF_REG_0, BPF_REG_3, 3), + BPF_MOV64_IMM(BPF_REG_4, 4), + BPF_ALU64_REG(BPF_ADD, BPF_REG_4, BPF_REG_2), + BPF_STX_MEM(BPF_B, BPF_REG_4, BPF_REG_4, 0), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .result = ACCEPT, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + }, + { + "direct packet access: test20 (x += pkt_ptr, 1)", + .insns = { + BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, + offsetof(struct __sk_buff, data)), + BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, + offsetof(struct __sk_buff, data_end)), + BPF_MOV64_IMM(BPF_REG_0, 0xffffffff), + BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_0, -8), + BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_10, -8), + BPF_ALU64_IMM(BPF_AND, BPF_REG_0, 0xffff), + BPF_MOV64_REG(BPF_REG_4, BPF_REG_0), + BPF_ALU64_REG(BPF_ADD, BPF_REG_4, BPF_REG_2), + BPF_MOV64_REG(BPF_REG_5, BPF_REG_4), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, 0xffff - 1), + BPF_JMP_REG(BPF_JGT, BPF_REG_4, BPF_REG_3, 1), + BPF_STX_MEM(BPF_DW, BPF_REG_5, BPF_REG_4, 0), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .result = ACCEPT, + }, + { + "direct packet access: test21 (x += pkt_ptr, 2)", + .insns = { + BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, + offsetof(struct __sk_buff, data)), + BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, + offsetof(struct __sk_buff, data_end)), + BPF_MOV64_REG(BPF_REG_0, BPF_REG_2), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 8), + BPF_JMP_REG(BPF_JGT, BPF_REG_0, BPF_REG_3, 9), + BPF_MOV64_IMM(BPF_REG_4, 0xffffffff), + BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_4, -8), + BPF_LDX_MEM(BPF_DW, BPF_REG_4, BPF_REG_10, -8), + BPF_ALU64_IMM(BPF_AND, BPF_REG_4, 0xffff), + BPF_ALU64_REG(BPF_ADD, BPF_REG_4, BPF_REG_2), + BPF_MOV64_REG(BPF_REG_5, BPF_REG_4), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, 0xffff - 1), + BPF_JMP_REG(BPF_JGT, BPF_REG_4, BPF_REG_3, 1), + BPF_STX_MEM(BPF_DW, BPF_REG_5, BPF_REG_4, 0), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .result = ACCEPT, + }, + { + "direct packet access: test22 (x += pkt_ptr, 3)", + .insns = { + BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, + offsetof(struct __sk_buff, data)), + BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, + offsetof(struct __sk_buff, data_end)), + BPF_MOV64_REG(BPF_REG_0, BPF_REG_2), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 8), + BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_2, -8), + BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_3, -16), + BPF_LDX_MEM(BPF_DW, BPF_REG_3, BPF_REG_10, -16), + BPF_JMP_REG(BPF_JGT, BPF_REG_0, BPF_REG_3, 11), + BPF_LDX_MEM(BPF_DW, BPF_REG_2, BPF_REG_10, -8), + BPF_MOV64_IMM(BPF_REG_4, 0xffffffff), + BPF_STX_XADD(BPF_DW, BPF_REG_10, BPF_REG_4, -8), + BPF_LDX_MEM(BPF_DW, BPF_REG_4, BPF_REG_10, -8), + BPF_ALU64_IMM(BPF_RSH, BPF_REG_4, 48), + BPF_ALU64_REG(BPF_ADD, BPF_REG_4, BPF_REG_2), + BPF_MOV64_REG(BPF_REG_0, BPF_REG_4), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 2), + BPF_JMP_REG(BPF_JGT, BPF_REG_0, BPF_REG_3, 2), + BPF_MOV64_IMM(BPF_REG_2, 1), + BPF_STX_MEM(BPF_H, BPF_REG_4, BPF_REG_2, 0), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .result = ACCEPT, + }, + { + "direct packet access: test23 (x += pkt_ptr, 4)", + .insns = { + BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, + offsetof(struct __sk_buff, data)), + BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, + offsetof(struct __sk_buff, data_end)), + BPF_MOV64_IMM(BPF_REG_0, 0xffffffff), + BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_0, -8), + BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_10, -8), + BPF_ALU64_IMM(BPF_AND, BPF_REG_0, 0xffff), + BPF_MOV64_REG(BPF_REG_4, BPF_REG_0), + BPF_MOV64_IMM(BPF_REG_0, 31), + BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_4), + BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_2), + BPF_MOV64_REG(BPF_REG_5, BPF_REG_0), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 0xffff - 1), + BPF_JMP_REG(BPF_JGT, BPF_REG_0, BPF_REG_3, 1), + BPF_STX_MEM(BPF_DW, BPF_REG_5, BPF_REG_0, 0), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .result = REJECT, + .errstr = "cannot add integer value with 47 upper zero bits to ptr_to_packet", + }, + { + "direct packet access: test24 (x += pkt_ptr, 5)", + .insns = { + BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, + offsetof(struct __sk_buff, data)), + BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, + offsetof(struct __sk_buff, data_end)), + BPF_MOV64_IMM(BPF_REG_0, 0xffffffff), + BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_0, -8), + BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_10, -8), + BPF_ALU64_IMM(BPF_AND, BPF_REG_0, 0xff), + BPF_MOV64_REG(BPF_REG_4, BPF_REG_0), + BPF_MOV64_IMM(BPF_REG_0, 64), + BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_4), + BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_2), + BPF_MOV64_REG(BPF_REG_5, BPF_REG_0), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 0xffff - 1), + BPF_JMP_REG(BPF_JGT, BPF_REG_0, BPF_REG_3, 1), + BPF_STX_MEM(BPF_DW, BPF_REG_5, BPF_REG_0, 0), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .result = ACCEPT, + }, + { "helper access to packet: test1, valid packet_ptr range", .insns = { BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, @@ -5235,6 +5418,98 @@ static struct bpf_test tests[] = { }, .result = ACCEPT, }, + { + "check bpf_perf_event_data->sample_period byte load permitted", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 0), +#ifdef __LITTLE_ENDIAN + BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_1, + offsetof(struct bpf_perf_event_data, sample_period)), +#else + BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_1, + offsetof(struct bpf_perf_event_data, sample_period) + 7), +#endif + BPF_EXIT_INSN(), + }, + .result = ACCEPT, + .prog_type = BPF_PROG_TYPE_PERF_EVENT, + }, + { + "check bpf_perf_event_data->sample_period half load permitted", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 0), +#ifdef __LITTLE_ENDIAN + BPF_LDX_MEM(BPF_H, BPF_REG_0, BPF_REG_1, + offsetof(struct bpf_perf_event_data, sample_period)), +#else + BPF_LDX_MEM(BPF_H, BPF_REG_0, BPF_REG_1, + offsetof(struct bpf_perf_event_data, sample_period) + 6), +#endif + BPF_EXIT_INSN(), + }, + .result = ACCEPT, + .prog_type = BPF_PROG_TYPE_PERF_EVENT, + }, + { + "check bpf_perf_event_data->sample_period word load permitted", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 0), +#ifdef __LITTLE_ENDIAN + BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_1, + offsetof(struct bpf_perf_event_data, sample_period)), +#else + BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_1, + offsetof(struct bpf_perf_event_data, sample_period) + 4), +#endif + BPF_EXIT_INSN(), + }, + .result = ACCEPT, + .prog_type = BPF_PROG_TYPE_PERF_EVENT, + }, + { + "check bpf_perf_event_data->sample_period dword load permitted", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, + offsetof(struct bpf_perf_event_data, sample_period)), + BPF_EXIT_INSN(), + }, + .result = ACCEPT, + .prog_type = BPF_PROG_TYPE_PERF_EVENT, + }, + { + "check skb->data half load not permitted", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 0), +#ifdef __LITTLE_ENDIAN + BPF_LDX_MEM(BPF_H, BPF_REG_0, BPF_REG_1, + offsetof(struct __sk_buff, data)), +#else + BPF_LDX_MEM(BPF_H, BPF_REG_0, BPF_REG_1, + offsetof(struct __sk_buff, data) + 2), +#endif + BPF_EXIT_INSN(), + }, + .result = REJECT, + .errstr = "invalid bpf_context access", + }, + { + "check skb->tc_classid half load not permitted for lwt prog", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 0), +#ifdef __LITTLE_ENDIAN + BPF_LDX_MEM(BPF_H, BPF_REG_0, BPF_REG_1, + offsetof(struct __sk_buff, tc_classid)), +#else + BPF_LDX_MEM(BPF_H, BPF_REG_0, BPF_REG_1, + offsetof(struct __sk_buff, tc_classid) + 2), +#endif + BPF_EXIT_INSN(), + }, + .result = REJECT, + .errstr = "invalid bpf_context access", + .prog_type = BPF_PROG_TYPE_LWT_IN, + }, }; static int probe_filter_length(const struct bpf_insn *fp) @@ -5484,7 +5759,7 @@ static int do_test(bool unpriv, unsigned int from, unsigned int to) } printf("Summary: %d PASSED, %d FAILED\n", passes, errors); - return errors ? -errors : 0; + return errors ? EXIT_FAILURE : EXIT_SUCCESS; } int main(int argc, char **argv) diff --git a/tools/testing/selftests/tc-testing/.gitignore b/tools/testing/selftests/tc-testing/.gitignore new file mode 100644 index 000000000000..c18dd8d83cee --- /dev/null +++ b/tools/testing/selftests/tc-testing/.gitignore @@ -0,0 +1 @@ +__pycache__/ diff --git a/tools/testing/selftests/tc-testing/README b/tools/testing/selftests/tc-testing/README new file mode 100644 index 000000000000..970ff294fec8 --- /dev/null +++ b/tools/testing/selftests/tc-testing/README @@ -0,0 +1,102 @@ +tdc - Linux Traffic Control (tc) unit testing suite + +Author: Lucas Bates - lucasb@mojatatu.com + +tdc is a Python script to load tc unit tests from a separate JSON file and +execute them inside a network namespace dedicated to the task. + + +REQUIREMENTS +------------ + +* Minimum Python version of 3.4. Earlier 3.X versions may work but are not + guaranteed. + +* The kernel must have network namespace support + +* The kernel must have veth support available, as a veth pair is created + prior to running the tests. + +* All tc-related features must be built in or available as modules. + To check what is required in current setup run: + ./tdc.py -c + + Note: + In the current release, tdc run will abort due to a failure in setup or + teardown commands - which includes not being able to run a test simply + because the kernel did not support a specific feature. (This will be + handled in a future version - the current workaround is to run the tests + on specific test categories that your kernel supports) + + +BEFORE YOU RUN +-------------- + +The path to the tc executable that will be most commonly tested can be defined +in the tdc_config.py file. Find the 'TC' entry in the NAMES dictionary and +define the path. + +If you need to test a different tc executable on the fly, you can do so by +using the -p option when running tdc: + ./tdc.py -p /path/to/tc + + +RUNNING TDC +----------- + +To use tdc, root privileges are required. tdc will not run otherwise. + +All tests are executed inside a network namespace to prevent conflicts +within the host. + +Running tdc without any arguments will run all tests. Refer to the section +on command line arguments for more information, or run: + ./tdc.py -h + +tdc will list the test names as they are being run, and print a summary in +TAP (Test Anything Protocol) format when they are done. If tests fail, +output captured from the failing test will be printed immediately following +the failed test in the TAP output. + + +USER-DEFINED CONSTANTS +---------------------- + +The tdc_config.py file contains multiple values that can be altered to suit +your needs. Any value in the NAMES dictionary can be altered without affecting +the tests to be run. These values are used in the tc commands that will be +executed as part of the test. More will be added as test cases require. + +Example: + $TC qdisc add dev $DEV1 ingress + + +COMMAND LINE ARGUMENTS +---------------------- + +Run tdc.py -h to see the full list of available arguments. + +-p PATH Specify the tc executable located at PATH to be used on this + test run +-c Show the available test case categories in this test file +-c CATEGORY Run only tests that belong to CATEGORY +-f FILE Read test cases from the JSON file named FILE +-l [CATEGORY] List all test cases in the JSON file. If CATEGORY is + specified, list test cases matching that category. +-s ID Show the test case matching ID +-e ID Execute the test case identified by ID +-i Generate unique ID numbers for test cases with no existing + ID number + + +ACKNOWLEDGEMENTS +---------------- + +Thanks to: + +Jamal Hadi Salim, for providing valuable test cases +Keara Leibovitz, who wrote the CLI test driver that I used as a base for the + first version of the tc testing suite. This work was presented at + Netdev 1.2 Tokyo in October 2016. +Samir Hussain, for providing help while I dove into Python for the first time + and being a second eye for this code. diff --git a/tools/testing/selftests/tc-testing/TODO.txt b/tools/testing/selftests/tc-testing/TODO.txt new file mode 100644 index 000000000000..6a266d811a78 --- /dev/null +++ b/tools/testing/selftests/tc-testing/TODO.txt @@ -0,0 +1,10 @@ +tc Testing Suite To-Do list: + +- Determine what tc features are supported in the kernel. If features are not + present, prevent the related categories from running. + +- Add support for multiple versions of tc to run successively + +- Improve error messages when tdc aborts its run + +- Allow tdc to write its results to file diff --git a/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt b/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt new file mode 100644 index 000000000000..4e09257bc443 --- /dev/null +++ b/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt @@ -0,0 +1,69 @@ +tdc - Adding test cases for tdc + +Author: Lucas Bates - lucasb@mojatatu.com + +ADDING TEST CASES +----------------- + +User-defined tests should be added by defining a separate JSON file. This +will help prevent conflicts when updating the repository. Refer to +template.json for the required JSON format for test cases. + +Include the 'id' field, but do not assign a value. Running tdc with the -i +option will generate a unique ID for that test case. + +tdc will recursively search the 'tc' subdirectory for .json files. Any +test case files you create in these directories will automatically be included. +If you wish to store your custom test cases elsewhere, be sure to run tdc +with the -f argument and the path to your file. + +Be aware of required escape characters in the JSON data - particularly when +defining the match pattern. Refer to the tctests.json file for examples when +in doubt. + + +TEST CASE STRUCTURE +------------------- + +Each test case has required data: + +id: A unique alphanumeric value to identify a particular test case +name: Descriptive name that explains the command under test +category: A list of single-word descriptions covering what the command + under test is testing. Example: filter, actions, u32, gact, etc. +setup: The list of commands required to ensure the command under test + succeeds. For example: if testing a filter, the command to create + the qdisc would appear here. +cmdUnderTest: The tc command being tested itself. +expExitCode: The code returned by the command under test upon its termination. + tdc will compare this value against the actual returned value. +verifyCmd: The tc command to be run to verify successful execution. + For example: if the command under test creates a gact action, + verifyCmd should be "$TC actions show action gact" +matchPattern: A regular expression to be applied against the output of the + verifyCmd to prove the command under test succeeded. This pattern + should be as specific as possible so that a false positive is not + matched. +matchCount: How many times the regex in matchPattern should match. A value + of 0 is acceptable. +teardown: The list of commands to clean up after the test is completed. + The environment should be returned to the same state as when + this test was started: qdiscs deleted, actions flushed, etc. + + +SETUP/TEARDOWN ERRORS +--------------------- + +If an error is detected during the setup/teardown process, execution of the +tests will immediately stop with an error message and the namespace in which +the tests are run will be destroyed. This is to prevent inaccurate results +in the test cases. + +Repeated failures of the setup/teardown may indicate a problem with the test +case, or possibly even a bug in one of the commands that are not being tested. + +It's possible to include acceptable exit codes with the setup/teardown command +so that it doesn't halt the script for an error that doesn't matter. Turn the +individual command into a list, with the command being first, followed by all +acceptable exit codes for the command. + diff --git a/tools/testing/selftests/tc-testing/creating-testcases/template.json b/tools/testing/selftests/tc-testing/creating-testcases/template.json new file mode 100644 index 000000000000..87971744bdd4 --- /dev/null +++ b/tools/testing/selftests/tc-testing/creating-testcases/template.json @@ -0,0 +1,40 @@ +[ + { + "id": "", + "name": "", + "category": [ + "", + "" + ], + "setup": [ + "" + ], + "cmdUnderTest": "", + "expExitCode": "", + "verifyCmd": "", + "matchPattern": "", + "matchCount": "", + "teardown": [ + "" + ] + }, + { + "id": "", + "name": "", + "category": [ + "", + "" + ], + "setup": [ + "" + ], + "cmdUnderTest": "", + "expExitCode": "", + "verifyCmd": "", + "matchPattern": "", + "matchCount": "", + "teardown": [ + "" + ] + } +] diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/tests.json b/tools/testing/selftests/tc-testing/tc-tests/actions/tests.json new file mode 100644 index 000000000000..af519bc97a8e --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/tests.json @@ -0,0 +1,1115 @@ +[ + { + "id": "e89a", + "name": "Add valid pass action", + "category": [ + "actions", + "gact" + ], + "setup": [ + [ + "$TC actions flush action gact", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pass index 8", + "expExitCode": "0", + "verifyCmd": "$TC actions list action gact", + "matchPattern": "action order [0-9]*: gact action pass.*index 8 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action gact" + ] + }, + { + "id": "a02c", + "name": "Add valid pipe action", + "category": [ + "actions", + "gact" + ], + "setup": [ + [ + "$TC actions flush action gact", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pipe index 6", + "expExitCode": "0", + "verifyCmd": "$TC actions list action gact", + "matchPattern": "action order [0-9]*: gact action pipe.*index 6 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action gact" + ] + }, + { + "id": "feef", + "name": "Add valid reclassify action", + "category": [ + "actions", + "gact" + ], + "setup": [ + [ + "$TC actions flush action gact", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action reclassify index 5", + "expExitCode": "0", + "verifyCmd": "$TC actions list action gact", + "matchPattern": "action order [0-9]*: gact action reclassify.*index 5 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action gact" + ] + }, + { + "id": "8a7a", + "name": "Add valid drop action", + "category": [ + "actions", + "gact" + ], + "setup": [ + [ + "$TC actions flush action gact", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action drop index 30", + "expExitCode": "0", + "verifyCmd": "$TC actions list action gact", + "matchPattern": "action order [0-9]*: gact action drop.*index 30 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action gact" + ] + }, + { + "id": "9a52", + "name": "Add valid continue action", + "category": [ + "actions", + "gact" + ], + "setup": [ + [ + "$TC actions flush action gact", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action continue index 432", + "expExitCode": "0", + "verifyCmd": "$TC actions list action gact", + "matchPattern": "action order [0-9]*: gact action continue.*index 432 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action gact" + ] + }, + { + "id": "d700", + "name": "Add invalid action", + "category": [ + "actions", + "gact" + ], + "setup": [ + [ + "$TC actions flush action gact", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pump index 386", + "expExitCode": "255", + "verifyCmd": "$TC actions list action gact", + "matchPattern": "action order [0-9]*: gact action.*index 386 ref", + "matchCount": "0", + "teardown": [ + "$TC actions flush action gact" + ] + }, + { + "id": "9215", + "name": "Add action with duplicate index", + "category": [ + "actions", + "gact" + ], + "setup": [ + [ + "$TC actions flush action gact", + 0, + 1, + 255 + ], + "$TC actions add action pipe index 15" + ], + "cmdUnderTest": "$TC actions add action drop index 15", + "expExitCode": "255", + "verifyCmd": "$TC actions list action gact", + "matchPattern": "action order [0-9]*: gact action drop.*index 15 ref", + "matchCount": "0", + "teardown": [ + "$TC actions flush action gact" + ] + }, + { + "id": "798e", + "name": "Add action with index exceeding 32-bit maximum", + "category": [ + "actions", + "gact" + ], + "setup": [ + [ + "$TC actions flush action gact", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action drop index 4294967296", + "expExitCode": "255", + "verifyCmd": "actions list action gact", + "matchPattern": "action order [0-9]*: gact action drop.*index 4294967296 ref", + "matchCount": "0", + "teardown": [ + "$TC actions flush action gact" + ] + }, + { + "id": "22be", + "name": "Add action with index at 32-bit maximum", + "category": [ + "actions", + "gact" + ], + "setup": [ + [ + "$TC actions flush action gact", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action drop index 4294967295", + "expExitCode": "0", + "verifyCmd": "$TC actions list action gact", + "matchPattern": "action order [0-9]*: gact action drop.*index 4294967295 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action gact" + ] + }, + { + "id": "ac2a", + "name": "List actions", + "category": [ + "actions", + "gact" + ], + "setup": [ + [ + "$TC actions flush action gact", + 0, + 1, + 255 + ], + "$TC actions add action reclassify index 101", + "$TC actions add action reclassify index 102", + "$TC actions add action reclassify index 103", + "$TC actions add action reclassify index 104", + "$TC actions add action reclassify index 105" + ], + "cmdUnderTest": "$TC actions list action gact", + "expExitCode": "0", + "verifyCmd": "$TC actions list action gact", + "matchPattern": "action order [0-9]*: gact action reclassify", + "matchCount": "5", + "teardown": [ + "$TC actions flush action gact" + ] + }, + { + "id": "63ec", + "name": "Delete pass action", + "category": [ + "actions", + "gact" + ], + "setup": [ + [ + "$TC actions flush action gact", + 0, + 1, + 255 + ], + "$TC actions add action pass index 1" + ], + "cmdUnderTest": "$TC actions del action gact index 1", + "expExitCode": "0", + "verifyCmd": "$TC actions list action gact", + "matchPattern": "action order [0-9]*: gact action pass.*index 1 ref", + "matchCount": "0", + "teardown": [ + "$TC actions flush action gact" + ] + }, + { + "id": "46be", + "name": "Delete pipe action", + "category": [ + "actions", + "gact" + ], + "setup": [ + [ + "$TC actions flush action gact", + 0, + 1, + 255 + ], + "$TC actions add action pipe index 9" + ], + "cmdUnderTest": "$TC actions del action gact index 9", + "expExitCode": "0", + "verifyCmd": "$TC actions list action gact", + "matchPattern": "action order [0-9]*: gact action pipe.*index 9 ref", + "matchCount": "0", + "teardown": [ + "$TC actions flush action gact" + ] + }, + { + "id": "2e08", + "name": "Delete reclassify action", + "category": [ + "actions", + "gact" + ], + "setup": [ + [ + "$TC actions flush action gact", + 0, + 1, + 255 + ], + "$TC actions add action reclassify index 65536" + ], + "cmdUnderTest": "$TC actions del action gact index 65536", + "expExitCode": "0", + "verifyCmd": "$TC actions list action gact", + "matchPattern": "action order [0-9]*: gact action reclassify.*index 65536 ref", + "matchCount": "0", + "teardown": [ + "$TC actions flush action gact" + ] + }, + { + "id": "99c4", + "name": "Delete drop action", + "category": [ + "actions", + "gact" + ], + "setup": [ + [ + "$TC actions flush action gact", + 0, + 1, + 255 + ], + "$TC actions add action drop index 16" + ], + "cmdUnderTest": "$TC actions del action gact index 16", + "expExitCode": "0", + "verifyCmd": "$TC actions list action gact", + "matchPattern": "action order [0-9]*: gact action drop.*index 16 ref", + "matchCount": "0", + "teardown": [ + "$TC actions flush action gact" + ] + }, + { + "id": "fb6b", + "name": "Delete continue action", + "category": [ + "actions", + "gact" + ], + "setup": [ + [ + "$TC actions flush action gact", + 0, + 1, + 255 + ], + "$TC actions add action continue index 32" + ], + "cmdUnderTest": "$TC actions del action gact index 32", + "expExitCode": "0", + "verifyCmd": "actions list action gact", + "matchPattern": "action order [0-9]*: gact action continue.*index 32 ref", + "matchCount": "0", + "teardown": [ + "$TC actions flush action gact" + ] + }, + { + "id": "0eb3", + "name": "Delete non-existent action", + "category": [ + "actions", + "gact" + ], + "setup": [ + [ + "$TC actions flush action gact", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions del action gact index 2", + "expExitCode": "255", + "verifyCmd": "$TC actions list action gact", + "matchPattern": "action order [0-9]*: gact action", + "matchCount": "0", + "teardown": [ + "$TC actions flush action gact" + ] + }, + { + "id": "5124", + "name": "Add mirred mirror to egress action", + "category": [ + "actions", + "mirred" + ], + "setup": [ + [ + "$TC actions flush action mirred", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mirred egress mirror index 1 dev lo", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mirred", + "matchPattern": "action order [0-9]*: mirred \\(Egress Mirror to device lo\\).*index 1 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mirred" + ] + }, + { + "id": "6fb4", + "name": "Add mirred redirect to egress action", + "category": [ + "actions", + "mirred" + ], + "setup": [ + [ + "$TC actions flush action mirred", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mirred egress redirect index 2 dev lo action pipe", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mirred", + "matchPattern": "action order [0-9]*: mirred \\(Egress Redirect to device lo\\).*index 2 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mirred" + ] + }, + { + "id": "ba38", + "name": "Get mirred actions", + "category": [ + "actions", + "mirred" + ], + "setup": [ + [ + "$TC actions flush action mirred", + 0, + 1, + 255 + ], + "$TC actions add action mirred egress mirror index 1 dev lo", + "$TC actions add action mirred egress redirect index 2 dev lo" + ], + "cmdUnderTest": "$TC actions show action mirred", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mirred", + "matchPattern": "[Mirror|Redirect] to device lo", + "matchCount": "2", + "teardown": [ + "$TC actions flush action mirred" + ] + }, + { + "id": "d7c0", + "name": "Add invalid mirred direction", + "category": [ + "actions", + "mirred" + ], + "setup": [ + [ + "$TC actions flush action mirred", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mirred inbound mirror index 20 dev lo", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mirred", + "matchPattern": "action order [0-9]*: mirred \\(.*to device lo\\).*index 20 ref", + "matchCount": "0", + "teardown": [ + "$TC actions flush action mirred" + ] + }, + { + "id": "e213", + "name": "Add invalid mirred action", + "category": [ + "actions", + "mirred" + ], + "setup": [ + [ + "$TC actions flush action mirred", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mirred egress remirror index 20 dev lo", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mirred", + "matchPattern": "action order [0-9]*: mirred \\(Egress.*to device lo\\).*index 20 ref", + "matchCount": "0", + "teardown": [ + "$TC actions flush action mirred" + ] + }, + { + "id": "2d89", + "name": "Add mirred action with invalid device", + "category": [ + "actions", + "mirred" + ], + "setup": [ + [ + "$TC actions flush action mirred", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mirred egress mirror index 20 dev eltoh", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mirred", + "matchPattern": "action order [0-9]*: mirred \\(.*to device eltoh\\).*index 20 ref", + "matchCount": "0", + "teardown": [ + "$TC actions flush action mirred" + ] + }, + { + "id": "300b", + "name": "Add mirred action with duplicate index", + "category": [ + "actions", + "mirred" + ], + "setup": [ + [ + "$TC actions flush action mirred", + 0, + 1, + 255 + ], + "$TC actions add action mirred egress redirect index 15 dev lo" + ], + "cmdUnderTest": "$TC actions add action mirred egress mirror index 15 dev lo", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mirred", + "matchPattern": "action order [0-9]*: mirred \\(.*to device lo\\).*index 15 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mirred" + ] + }, + { + "id": "a70e", + "name": "Delete mirred mirror action", + "category": [ + "actions", + "mirred" + ], + "setup": [ + [ + "$TC actions flush action mirred", + 0, + 1, + 255 + ], + "$TC actions add action mirred egress mirror index 5 dev lo" + ], + "cmdUnderTest": "$TC actions del action mirred index 5", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mirred", + "matchPattern": "action order [0-9]*: mirred \\(Egress Mirror to device lo\\).*index 5 ref", + "matchCount": "0", + "teardown": [ + "$TC actions flush action mirred" + ] + }, + { + "id": "3fb3", + "name": "Delete mirred redirect action", + "category": [ + "actions", + "mirred" + ], + "setup": [ + [ + "$TC actions flush action mirred", + 0, + 1, + 255 + ], + "$TC actions add action mirred egress redirect index 5 dev lo" + ], + "cmdUnderTest": "$TC actions del action mirred index 5", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mirred", + "matchPattern": "action order [0-9]*: mirred \\(Egress Redirect to device lo\\).*index 5 ref", + "matchCount": "0", + "teardown": [ + "$TC actions flush action mirred" + ] + }, + { + "id": "b078", + "name": "Add simple action", + "category": [ + "actions", + "simple" + ], + "setup": [ + [ + "$TC actions flush action simple", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action simple sdata \"A triumph\" index 60", + "expExitCode": "0", + "verifyCmd": "$TC actions list action simple", + "matchPattern": "action order [0-9]*: Simple <A triumph>.*index 60 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action simple" + ] + }, + { + "id": "6d4c", + "name": "Add simple action with duplicate index", + "category": [ + "actions", + "simple" + ], + "setup": [ + [ + "$TC actions flush action simple", + 0, + 1, + 255 + ], + "$TC actions add action simple sdata \"Aruba\" index 4" + ], + "cmdUnderTest": "$TC actions add action simple sdata \"Jamaica\" index 4", + "expExitCode": "255", + "verifyCmd": "$TC actions list action simple", + "matchPattern": "action order [0-9]*: Simple <Jamaica>.*ref", + "matchCount": "0", + "teardown": [ + "$TC actions flush action simple" + ] + }, + { + "id": "2542", + "name": "List simple actions", + "category": [ + "actions", + "simple" + ], + "setup": [ + [ + "$TC actions flush action simple", + 0, + 1, + 255 + ], + "$TC actions add action simple sdata \"Rock\"", + "$TC actions add action simple sdata \"Paper\"", + "$TC actions add action simple sdata \"Scissors\" index 98" + ], + "cmdUnderTest": "$TC actions list action simple", + "expExitCode": "0", + "verifyCmd": "$TC actions list action simple", + "matchPattern": "action order [0-9]*: Simple <[A-Z][a-z]*>", + "matchCount": "3", + "teardown": [ + "$TC actions flush action simple" + ] + }, + { + "id": "ea67", + "name": "Delete simple action", + "category": [ + "actions", + "simple" + ], + "setup": [ + [ + "$TC actions flush action simple", + 0, + 1, + 255 + ], + "$TC actions add action simple sdata \"Blinkenlights\" index 1" + ], + "cmdUnderTest": "$TC actions delete action simple index 1", + "expExitCode": "0", + "verifyCmd": "$TC actions list action simple", + "matchPattern": "action order [0-9]*: Simple <Blinkenlights>.*index 1 ref", + "matchCount": "0", + "teardown": [ + "$TC actions flush action simple" + ] + }, + { + "id": "8ff1", + "name": "Flush simple actions", + "category": [ + "actions", + "simple" + ], + "setup": [ + [ + "$TC actions flush action simple", + 0, + 1, + 255 + ], + "$TC actions add action simple sdata \"Kirk\"", + "$TC actions add action simple sdata \"Spock\" index 50", + "$TC actions add action simple sdata \"McCoy\" index 9" + ], + "cmdUnderTest": "$TC actions flush action simple", + "expExitCode": "0", + "verifyCmd": "$TC actions list action simple", + "matchPattern": "action order [0-9]*: Simple <[A-Z][a-z]*>", + "matchCount": "0", + "teardown": [ + "" + ] + }, + { + "id": "6236", + "name": "Add skbedit action with valid mark", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action skbedit mark 1", + "expExitCode": "0", + "verifyCmd": "$TC actions list action skbedit", + "matchPattern": "action order [0-9]*: skbedit mark 1", + "matchCount": "1", + "teardown": [ + "$TC actions flush action skbedit" + ] + }, + { + "id": "407b", + "name": "Add skbedit action with invalid mark", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action skbedit mark 666777888999", + "expExitCode": "255", + "verifyCmd": "$TC actions list action skbedit", + "matchPattern": "action order [0-9]*: skbedit mark", + "matchCount": "0", + "teardown": [ + "$TC actions flush action skbedit" + ] + }, + { + "id": "081d", + "name": "Add skbedit action with priority", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action skbedit prio 99", + "expExitCode": "0", + "verifyCmd": "$TC actions list action skbedit", + "matchPattern": "action order [0-9]*: skbedit priority :99", + "matchCount": "1", + "teardown": [ + "$TC actions flush action skbedit" + ] + }, + { + "id": "cc37", + "name": "Add skbedit action with invalid priority", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action skbedit prio foo", + "expExitCode": "255", + "verifyCmd": "$TC actions list action skbedit", + "matchPattern": "action order [0-9]*: skbedit priority", + "matchCount": "0", + "teardown": [ + "$TC actions flush action skbedit" + ] + }, + { + "id": "3c95", + "name": "Add skbedit action with queue_mapping", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action skbedit queue_mapping 909", + "expExitCode": "0", + "verifyCmd": "$TC actions list action skbedit", + "matchPattern": "action order [0-9]*: skbedit queue_mapping 909", + "matchCount": "1", + "teardown": [ + "$TC actions flush action skbedit" + ] + }, + { + "id": "985c", + "name": "Add skbedit action with invalid queue_mapping", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action skbedit queue_mapping 67000", + "expExitCode": "255", + "verifyCmd": "$TC actions list action skbedit", + "matchPattern": "action order [0-9]*: skbedit queue_mapping", + "matchCount": "0", + "teardown": [ + "$TC actions flush action skbedit" + ] + }, + { + "id": "224f", + "name": "Add skbedit action with ptype host", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action skbedit ptype host", + "expExitCode": "0", + "verifyCmd": "$TC actions list action skbedit", + "matchPattern": "action order [0-9]*: skbedit ptype host", + "matchCount": "1", + "teardown": [ + "$TC actions flush action skbedit" + ] + }, + { + "id": "d1a3", + "name": "Add skbedit action with ptype otherhost", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action skbedit ptype otherhost", + "expExitCode": "0", + "verifyCmd": "$TC actions list action skbedit", + "matchPattern": "action order [0-9]*: skbedit ptype otherhost", + "matchCount": "1", + "teardown": [ + "$TC actions flush action skbedit" + ] + }, + { + "id": "b9c6", + "name": "Add skbedit action with invalid ptype", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action skbedit ptype openair", + "expExitCode": "255", + "verifyCmd": "$TC actions list action skbedit", + "matchPattern": "action order [0-9]*: skbedit ptype openair", + "matchCount": "0", + "teardown": [ + "$TC actions flush action skbedit" + ] + }, + { + "id": "5172", + "name": "List skbedit actions", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ], + "$TC actions add action skbedit ptype otherhost", + "$TC actions add action skbedit ptype broadcast", + "$TC actions add action skbedit mark 59", + "$TC actions add action skbedit mark 409" + ], + "cmdUnderTest": "$TC actions list action skbedit", + "expExitCode": "0", + "verifyCmd": "$TC actions list action skbedit", + "matchPattern": "action order [0-9]*: skbedit", + "matchCount": "4", + "teardown": [ + "$TC actions flush action skbedit" + ] + }, + { + "id": "a6d6", + "name": "Add skbedit action with index", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action skbedit mark 808 index 4040404040", + "expExitCode": "0", + "verifyCmd": "$TC actions list action skbedit", + "matchPattern": "index 4040404040", + "matchCount": "1", + "teardown": [ + "$TC actions flush action skbedit" + ] + }, + { + "id": "38f3", + "name": "Delete skbedit action", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ], + "$TC actions add action skbedit mark 42 index 9009" + ], + "cmdUnderTest": "$TC actions del action skbedit index 9009", + "expExitCode": "0", + "verifyCmd": "$TC actions list action skbedit", + "matchPattern": "action order [0-9]*: skbedit mark 42", + "matchCount": "0", + "teardown": [ + "$TC actions flush action skbedit" + ] + }, + { + "id": "ce97", + "name": "Flush skbedit actions", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + "$TC actions add action skbedit mark 500", + "$TC actions add action skbedit mark 501", + "$TC actions add action skbedit mark 502", + "$TC actions add action skbedit mark 503", + "$TC actions add action skbedit mark 504", + "$TC actions add action skbedit mark 505", + "$TC actions add action skbedit mark 506" + ], + "cmdUnderTest": "$TC actions flush action skbedit", + "expExitCode": "0", + "verifyCmd": "$TC actions list action skbedit", + "matchPattern": "action order [0-9]*: skbedit", + "matchCount": "0", + "teardown": [ + "$TC actions flush action skbedit" + ] + }, + { + "id": "f02c", + "name": "Replace gact action", + "category": [ + "actions", + "gact" + ], + "setup": [ + [ + "$TC actions flush action gact", + 0, + 1, + 255 + ], + "$TC actions add action drop index 10", + "$TC actions add action drop index 12" + ], + "cmdUnderTest": "$TC actions replace action ok index 12", + "expExitCode": "0", + "verifyCmd": "$TC actions ls action gact", + "matchPattern": "action order [0-9]*: gact action pass", + "matchCount": "1", + "teardown": [ + "$TC actions flush action gact" + ] + }, + { + "id": "525f", + "name": "Get gact action by index", + "category": [ + "actions", + "gact" + ], + "setup": [ + [ + "$TC actions flush action gact", + 0, + 1, + 255 + ], + "$TC actions add action drop index 3900800700" + ], + "cmdUnderTest": "$TC actions get action gact index 3900800700", + "expExitCode": "0", + "verifyCmd": "$TC actions get action gact index 3900800700", + "matchPattern": "index 3900800700", + "matchCount": "1", + "teardown": [ + "$TC actions flush action gact" + ] + } +]
\ No newline at end of file diff --git a/tools/testing/selftests/tc-testing/tc-tests/filters/tests.json b/tools/testing/selftests/tc-testing/tc-tests/filters/tests.json new file mode 100644 index 000000000000..c727b96a59b0 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/filters/tests.json @@ -0,0 +1,21 @@ +[ + { + "id": "e9a3", + "name": "Add u32 with source match", + "category": [ + "filter", + "u32" + ], + "setup": [ + "$TC qdisc add dev $DEV1 ingress" + ], + "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: protocol ip prio 1 u32 match ip src 127.0.0.1/32 flowid 1:1 action ok", + "expExitCode": "0", + "verifyCmd": "$TC filter show dev $DEV1 parent ffff:", + "matchPattern": "match 7f000002/ffffffff at 12", + "matchCount": "0", + "teardown": [ + "$TC qdisc del dev $DEV1 ingress" + ] + } +]
\ No newline at end of file diff --git a/tools/testing/selftests/tc-testing/tdc.py b/tools/testing/selftests/tc-testing/tdc.py new file mode 100755 index 000000000000..cd61b7844c0d --- /dev/null +++ b/tools/testing/selftests/tc-testing/tdc.py @@ -0,0 +1,413 @@ +#!/usr/bin/env python3 + +""" +tdc.py - Linux tc (Traffic Control) unit test driver + +Copyright (C) 2017 Lucas Bates <lucasb@mojatatu.com> +""" + +import re +import os +import sys +import argparse +import json +import subprocess +from collections import OrderedDict +from string import Template + +from tdc_config import * +from tdc_helper import * + + +USE_NS = True + + +def replace_keywords(cmd): + """ + For a given executable command, substitute any known + variables contained within NAMES with the correct values + """ + tcmd = Template(cmd) + subcmd = tcmd.safe_substitute(NAMES) + return subcmd + + +def exec_cmd(command, nsonly=True): + """ + Perform any required modifications on an executable command, then run + it in a subprocess and return the results. + """ + if (USE_NS and nsonly): + command = 'ip netns exec $NS ' + command + + if '$' in command: + command = replace_keywords(command) + + proc = subprocess.Popen(command, + shell=True, + stdout=subprocess.PIPE, + stderr=subprocess.PIPE) + (rawout, serr) = proc.communicate() + + if proc.returncode != 0: + foutput = serr.decode("utf-8") + else: + foutput = rawout.decode("utf-8") + + proc.stdout.close() + proc.stderr.close() + return proc, foutput + + +def prepare_env(cmdlist): + """ + Execute the setup/teardown commands for a test case. Optionally + terminate test execution if the command fails. + """ + for cmdinfo in cmdlist: + if (type(cmdinfo) == list): + exit_codes = cmdinfo[1:] + cmd = cmdinfo[0] + else: + exit_codes = [0] + cmd = cmdinfo + + if (len(cmd) == 0): + continue + + (proc, foutput) = exec_cmd(cmd) + + if proc.returncode not in exit_codes: + print + print("Could not execute:") + print(cmd) + print("\nError message:") + print(foutput) + print("\nAborting test run.") + ns_destroy() + exit(1) + + +def test_runner(filtered_tests): + """ + Driver function for the unit tests. + + Prints information about the tests being run, executes the setup and + teardown commands and the command under test itself. Also determines + success/failure based on the information in the test case and generates + TAP output accordingly. + """ + testlist = filtered_tests + tcount = len(testlist) + index = 1 + tap = str(index) + ".." + str(tcount) + "\n" + + for tidx in testlist: + result = True + tresult = "" + print("Test " + tidx["id"] + ": " + tidx["name"]) + prepare_env(tidx["setup"]) + (p, procout) = exec_cmd(tidx["cmdUnderTest"]) + exit_code = p.returncode + + if (exit_code != int(tidx["expExitCode"])): + result = False + print("exit:", exit_code, int(tidx["expExitCode"])) + print(procout) + else: + match_pattern = re.compile(str(tidx["matchPattern"]), re.DOTALL) + (p, procout) = exec_cmd(tidx["verifyCmd"]) + match_index = re.findall(match_pattern, procout) + if len(match_index) != int(tidx["matchCount"]): + result = False + + if result == True: + tresult += "ok " + else: + tresult += "not ok " + tap += tresult + str(index) + " " + tidx["id"] + " " + tidx["name"] + "\n" + + if result == False: + tap += procout + + prepare_env(tidx["teardown"]) + index += 1 + + return tap + + +def ns_create(): + """ + Create the network namespace in which the tests will be run and set up + the required network devices for it. + """ + if (USE_NS): + cmd = 'ip netns add $NS' + exec_cmd(cmd, False) + cmd = 'ip link add $DEV0 type veth peer name $DEV1' + exec_cmd(cmd, False) + cmd = 'ip link set $DEV1 netns $NS' + exec_cmd(cmd, False) + cmd = 'ip link set $DEV0 up' + exec_cmd(cmd, False) + cmd = 'ip -s $NS link set $DEV1 up' + exec_cmd(cmd, False) + + +def ns_destroy(): + """ + Destroy the network namespace for testing (and any associated network + devices as well) + """ + if (USE_NS): + cmd = 'ip netns delete $NS' + exec_cmd(cmd, False) + + +def has_blank_ids(idlist): + """ + Search the list for empty ID fields and return true/false accordingly. + """ + return not(all(k for k in idlist)) + + +def load_from_file(filename): + """ + Open the JSON file containing the test cases and return them as an + ordered dictionary object. + """ + with open(filename) as test_data: + testlist = json.load(test_data, object_pairs_hook=OrderedDict) + idlist = get_id_list(testlist) + if (has_blank_ids(idlist)): + for k in testlist: + k['filename'] = filename + return testlist + + +def args_parse(): + """ + Create the argument parser. + """ + parser = argparse.ArgumentParser(description='Linux TC unit tests') + return parser + + +def set_args(parser): + """ + Set the command line arguments for tdc. + """ + parser.add_argument('-p', '--path', type=str, + help='The full path to the tc executable to use') + parser.add_argument('-c', '--category', type=str, nargs='?', const='+c', + help='Run tests only from the specified category, or if no category is specified, list known categories.') + parser.add_argument('-f', '--file', type=str, + help='Run tests from the specified file') + parser.add_argument('-l', '--list', type=str, nargs='?', const="", metavar='CATEGORY', + help='List all test cases, or those only within the specified category') + parser.add_argument('-s', '--show', type=str, nargs=1, metavar='ID', dest='showID', + help='Display the test case with specified id') + parser.add_argument('-e', '--execute', type=str, nargs=1, metavar='ID', + help='Execute the single test case with specified ID') + parser.add_argument('-i', '--id', action='store_true', dest='gen_id', + help='Generate ID numbers for new test cases') + return parser + return parser + + +def check_default_settings(args): + """ + Process any arguments overriding the default settings, and ensure the + settings are correct. + """ + # Allow for overriding specific settings + global NAMES + + if args.path != None: + NAMES['TC'] = args.path + if not os.path.isfile(NAMES['TC']): + print("The specified tc path " + NAMES['TC'] + " does not exist.") + exit(1) + + +def get_id_list(alltests): + """ + Generate a list of all IDs in the test cases. + """ + return [x["id"] for x in alltests] + + +def check_case_id(alltests): + """ + Check for duplicate test case IDs. + """ + idl = get_id_list(alltests) + return [x for x in idl if idl.count(x) > 1] + + +def does_id_exist(alltests, newid): + """ + Check if a given ID already exists in the list of test cases. + """ + idl = get_id_list(alltests) + return (any(newid == x for x in idl)) + + +def generate_case_ids(alltests): + """ + If a test case has a blank ID field, generate a random hex ID for it + and then write the test cases back to disk. + """ + import random + for c in alltests: + if (c["id"] == ""): + while True: + newid = str('%04x' % random.randrange(16**4)) + if (does_id_exist(alltests, newid)): + continue + else: + c['id'] = newid + break + + ufilename = [] + for c in alltests: + if ('filename' in c): + ufilename.append(c['filename']) + ufilename = get_unique_item(ufilename) + for f in ufilename: + testlist = [] + for t in alltests: + if 'filename' in t: + if t['filename'] == f: + del t['filename'] + testlist.append(t) + outfile = open(f, "w") + json.dump(testlist, outfile, indent=4) + outfile.close() + + +def get_test_cases(args): + """ + If a test case file is specified, retrieve tests from that file. + Otherwise, glob for all json files in subdirectories and load from + each one. + """ + import fnmatch + if args.file != None: + if not os.path.isfile(args.file): + print("The specified test case file " + args.file + " does not exist.") + exit(1) + flist = [args.file] + else: + flist = [] + for root, dirnames, filenames in os.walk('tc-tests'): + for filename in fnmatch.filter(filenames, '*.json'): + flist.append(os.path.join(root, filename)) + alltests = list() + for casefile in flist: + alltests = alltests + (load_from_file(casefile)) + return alltests + + +def set_operation_mode(args): + """ + Load the test case data and process remaining arguments to determine + what the script should do for this run, and call the appropriate + function. + """ + alltests = get_test_cases(args) + + if args.gen_id: + idlist = get_id_list(alltests) + if (has_blank_ids(idlist)): + alltests = generate_case_ids(alltests) + else: + print("No empty ID fields found in test files.") + exit(0) + + duplicate_ids = check_case_id(alltests) + if (len(duplicate_ids) > 0): + print("The following test case IDs are not unique:") + print(str(set(duplicate_ids))) + print("Please correct them before continuing.") + exit(1) + + ucat = get_test_categories(alltests) + + if args.showID: + show_test_case_by_id(alltests, args.showID[0]) + exit(0) + + if args.execute: + target_id = args.execute[0] + else: + target_id = "" + + if args.category: + if (args.category == '+c'): + print("Available categories:") + print_sll(ucat) + exit(0) + else: + target_category = args.category + else: + target_category = "" + + + testcases = get_categorized_testlist(alltests, ucat) + + if args.list: + if (len(args.list) == 0): + list_test_cases(alltests) + exit(0) + elif(len(args.list > 0)): + if (args.list not in ucat): + print("Unknown category " + args.list) + print("Available categories:") + print_sll(ucat) + exit(1) + list_test_cases(testcases[args.list]) + exit(0) + + if (os.geteuid() != 0): + print("This script must be run with root privileges.\n") + exit(1) + + ns_create() + + if (len(target_category) == 0): + if (len(target_id) > 0): + alltests = list(filter(lambda x: target_id in x['id'], alltests)) + if (len(alltests) == 0): + print("Cannot find a test case with ID matching " + target_id) + exit(1) + catresults = test_runner(alltests) + print("All test results: " + "\n\n" + catresults) + elif (len(target_category) > 0): + if (target_category not in ucat): + print("Specified category is not present in this file.") + exit(1) + else: + catresults = test_runner(testcases[target_category]) + print("Category " + target_category + "\n\n" + catresults) + + ns_destroy() + + +def main(): + """ + Start of execution; set up argument parser and get the arguments, + and start operations. + """ + parser = args_parse() + parser = set_args(parser) + (args, remaining) = parser.parse_known_args() + check_default_settings(args) + + set_operation_mode(args) + + exit(0) + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/tc-testing/tdc_config.py b/tools/testing/selftests/tc-testing/tdc_config.py new file mode 100644 index 000000000000..01087375a7c3 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tdc_config.py @@ -0,0 +1,17 @@ +""" +tdc_config.py - tdc user-specified values + +Copyright (C) 2017 Lucas Bates <lucasb@mojatatu.com> +""" + +# Dictionary containing all values that can be substituted in executable +# commands. +NAMES = { + # Substitute your own tc path here + 'TC': '/sbin/tc', + # Name of veth devices to be created for the namespace + 'DEV0': 'v0p0', + 'DEV1': 'v0p1', + # Name of the namespace to use + 'NS': 'tcut' + } diff --git a/tools/testing/selftests/tc-testing/tdc_helper.py b/tools/testing/selftests/tc-testing/tdc_helper.py new file mode 100644 index 000000000000..c3254f861fb2 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tdc_helper.py @@ -0,0 +1,75 @@ +""" +tdc_helper.py - tdc helper functions + +Copyright (C) 2017 Lucas Bates <lucasb@mojatatu.com> +""" + +def get_categorized_testlist(alltests, ucat): + """ Sort the master test list into categories. """ + testcases = dict() + + for category in ucat: + testcases[category] = list(filter(lambda x: category in x['category'], alltests)) + + return(testcases) + + +def get_unique_item(lst): + """ For a list, return a set of the unique items in the list. """ + return list(set(lst)) + + +def get_test_categories(alltests): + """ Discover all unique test categories present in the test case file. """ + ucat = [] + for t in alltests: + ucat.extend(get_unique_item(t['category'])) + ucat = get_unique_item(ucat) + return ucat + +def list_test_cases(testlist): + """ Print IDs and names of all test cases. """ + for curcase in testlist: + print(curcase['id'] + ': (' + ', '.join(curcase['category']) + ") " + curcase['name']) + + +def list_categories(testlist): + """ Show all categories that are present in a test case file. """ + categories = set(map(lambda x: x['category'], testlist)) + print("Available categories:") + print(", ".join(str(s) for s in categories)) + print("") + + +def print_list(cmdlist): + """ Print a list of strings prepended with a tab. """ + for l in cmdlist: + if (type(l) == list): + print("\t" + str(l[0])) + else: + print("\t" + str(l)) + + +def print_sll(items): + print("\n".join(str(s) for s in items)) + + +def print_test_case(tcase): + """ Pretty-printing of a given test case. """ + for k in tcase.keys(): + if (type(tcase[k]) == list): + print(k + ":") + print_list(tcase[k]) + else: + print(k + ": " + tcase[k]) + + +def show_test_case_by_id(testlist, caseID): + """ Find the specified test case to pretty-print. """ + if not any(d.get('id', None) == caseID for d in testlist): + print("That ID does not exist.") + exit(1) + else: + print_test_case(next((d for d in testlist if d['id'] == caseID))) + + |