summaryrefslogtreecommitdiffstats
path: root/tools
diff options
context:
space:
mode:
authorRusty Russell <rusty@rustcorp.com.au>2015-02-11 15:15:10 +1030
committerRusty Russell <rusty@rustcorp.com.au>2015-02-11 16:47:31 +1030
commitc565650b1028bc551e5d16dd0ec8f7078da7cace (patch)
tree019581b2a4821eba84ebdff179034c5ac57ca1a3 /tools
parentc9e433e4b852b70ea267388cf9b5d8096b04c44c (diff)
downloadlinux-c565650b1028bc551e5d16dd0ec8f7078da7cace.tar.bz2
lguest: send trap 13 through to userspace.
We copy 7 bytes at eip for userspace's instruction decode; we have to carefully handle the case where eip is at the end of a page. We can't leave this to userspace since kernel has all the page table decode logic. The decode logic moves to userspace, basically unchanged. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Diffstat (limited to 'tools')
-rw-r--r--tools/lguest/lguest.c149
1 files changed, 149 insertions, 0 deletions
diff --git a/tools/lguest/lguest.c b/tools/lguest/lguest.c
index 0e754d04876d..b2217657f62c 100644
--- a/tools/lguest/lguest.c
+++ b/tools/lguest/lguest.c
@@ -41,6 +41,7 @@
#include <signal.h>
#include <pwd.h>
#include <grp.h>
+#include <sys/user.h>
#ifndef VIRTIO_F_ANY_LAYOUT
#define VIRTIO_F_ANY_LAYOUT 27
@@ -1143,6 +1144,150 @@ static void handle_output(unsigned long addr)
strnlen(from_guest_phys(addr), guest_limit - addr));
}
+/*L:216
+ * This is where we emulate a handful of Guest instructions. It's ugly
+ * and we used to do it in the kernel but it grew over time.
+ */
+
+/*
+ * We use the ptrace syscall's pt_regs struct to talk about registers
+ * to lguest: these macros convert the names to the offsets.
+ */
+#define getreg(name) getreg_off(offsetof(struct user_regs_struct, name))
+#define setreg(name, val) \
+ setreg_off(offsetof(struct user_regs_struct, name), (val))
+
+static u32 getreg_off(size_t offset)
+{
+ u32 r;
+ unsigned long args[] = { LHREQ_GETREG, offset };
+
+ if (pwrite(lguest_fd, args, sizeof(args), cpu_id) < 0)
+ err(1, "Getting register %u", offset);
+ if (pread(lguest_fd, &r, sizeof(r), cpu_id) != sizeof(r))
+ err(1, "Reading register %u", offset);
+
+ return r;
+}
+
+static void setreg_off(size_t offset, u32 val)
+{
+ unsigned long args[] = { LHREQ_SETREG, offset, val };
+
+ if (pwrite(lguest_fd, args, sizeof(args), cpu_id) < 0)
+ err(1, "Setting register %u", offset);
+}
+
+static void emulate_insn(const u8 insn[])
+{
+ unsigned long args[] = { LHREQ_TRAP, 13 };
+ unsigned int insnlen = 0, in = 0, small_operand = 0, byte_access;
+ unsigned int eax, port, mask;
+ /*
+ * We always return all-ones on IO port reads, which traditionally
+ * means "there's nothing there".
+ */
+ u32 val = 0xFFFFFFFF;
+
+ /*
+ * This must be the Guest kernel trying to do something, not userspace!
+ * The bottom two bits of the CS segment register are the privilege
+ * level.
+ */
+ if ((getreg(xcs) & 3) != 0x1)
+ goto no_emulate;
+
+ /* Decoding x86 instructions is icky. */
+
+ /*
+ * Around 2.6.33, the kernel started using an emulation for the
+ * cmpxchg8b instruction in early boot on many configurations. This
+ * code isn't paravirtualized, and it tries to disable interrupts.
+ * Ignore it, which will Mostly Work.
+ */
+ if (insn[insnlen] == 0xfa) {
+ /* "cli", or Clear Interrupt Enable instruction. Skip it. */
+ insnlen = 1;
+ goto skip_insn;
+ }
+
+ /*
+ * 0x66 is an "operand prefix". It means a 16, not 32 bit in/out.
+ */
+ if (insn[insnlen] == 0x66) {
+ small_operand = 1;
+ /* The instruction is 1 byte so far, read the next byte. */
+ insnlen = 1;
+ }
+
+ /* If the lower bit isn't set, it's a single byte access */
+ byte_access = !(insn[insnlen] & 1);
+
+ /*
+ * Now we can ignore the lower bit and decode the 4 opcodes
+ * we need to emulate.
+ */
+ switch (insn[insnlen] & 0xFE) {
+ case 0xE4: /* in <next byte>,%al */
+ port = insn[insnlen+1];
+ insnlen += 2;
+ in = 1;
+ break;
+ case 0xEC: /* in (%dx),%al */
+ port = getreg(edx) & 0xFFFF;
+ insnlen += 1;
+ in = 1;
+ break;
+ case 0xE6: /* out %al,<next byte> */
+ port = insn[insnlen+1];
+ insnlen += 2;
+ break;
+ case 0xEE: /* out %al,(%dx) */
+ port = getreg(edx) & 0xFFFF;
+ insnlen += 1;
+ break;
+ default:
+ /* OK, we don't know what this is, can't emulate. */
+ goto no_emulate;
+ }
+
+ /* Set a mask of the 1, 2 or 4 bytes, depending on size of IO */
+ if (byte_access)
+ mask = 0xFF;
+ else if (small_operand)
+ mask = 0xFFFF;
+ else
+ mask = 0xFFFFFFFF;
+
+ /*
+ * If it was an "IN" instruction, they expect the result to be read
+ * into %eax, so we change %eax.
+ */
+ eax = getreg(eax);
+
+ if (in) {
+ /* Clear the bits we're about to read */
+ eax &= ~mask;
+ /* Copy bits in from val. */
+ eax |= val & mask;
+ /* Now update the register. */
+ setreg(eax, eax);
+ }
+
+ verbose("IO %s of %x to %u: %#08x\n",
+ in ? "IN" : "OUT", mask, port, eax);
+skip_insn:
+ /* Finally, we've "done" the instruction, so move past it. */
+ setreg(eip, getreg(eip) + insnlen);
+ return;
+
+no_emulate:
+ /* Inject trap into Guest. */
+ if (write(lguest_fd, args, sizeof(args)) < 0)
+ err(1, "Reinjecting trap 13 for fault at %#x", getreg(eip));
+}
+
+
/*L:190
* Device Setup
*
@@ -1832,6 +1977,10 @@ static void __attribute__((noreturn)) run_guest(void)
verbose("Notify on address %#08x\n",
notify.addr);
handle_output(notify.addr);
+ } else if (notify.trap == 13) {
+ verbose("Emulating instruction at %#x\n",
+ getreg(eip));
+ emulate_insn(notify.insn);
} else
errx(1, "Unknown trap %i addr %#08x\n",
notify.trap, notify.addr);