selftests: mlxsw: Add rtnetlink tests

Add a new test that is focused on rtnetlink configuration. Its purpose
is to test valid and invalid (as deemed by mlxsw) configurations and
make sure that they succeed / fail without producing a trace.

Some of the test cases are derived from recent fixes in order to make
sure that the fixed bugs are not introduced again.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 392 insertions, 0 deletions

diff --git a/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh
index 7f78b96279f3..9040bfbddfba 100755
--- a/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh
@@ -13,9 +13,23 @@ ALL_TESTS="
 	rif_set_addr_test
 	rif_inherit_bridge_addr_test
 	rif_non_inherit_bridge_addr_test
+	vlan_interface_deletion_test
+	bridge_deletion_test
+	bridge_vlan_flags_test
+	vlan_1_test
+	lag_bridge_upper_test
+	duplicate_vlans_test
+	vlan_rif_refcount_test
+	subport_rif_refcount_test
+	vlan_dev_deletion_test
+	lag_unlink_slaves_test
+	lag_dev_deletion_test
+	vlan_interface_uppers_test
+	devlink_reload_test
 "
 NUM_NETIFS=2
 source $lib_dir/lib.sh
+source $lib_dir/devlink_lib.sh
 
 setup_prepare()
 {
@@ -160,6 +174,384 @@ rif_non_inherit_bridge_addr_test()
 	ip addr del dev $swp1 192.0.2.1/28
 }
 
+vlan_interface_deletion_test()
+{
+	# Test that when a VLAN interface is deleted, its associated router
+	# interface (RIF) is correctly deleted and not leaked. See commit
+	# c360867ec46a ("mlxsw: spectrum: Delete RIF when VLAN device is
+	# removed") for more details
+	RET=0
+
+	ip link add name br0 type bridge vlan_filtering 1
+	ip link set dev $swp1 master br0
+
+	ip link add link br0 name br0.10 type vlan id 10
+	ip -6 address add 2001:db8:1::1/64 dev br0.10
+	ip link del dev br0.10
+
+	# If we leaked the previous RIF, then this should produce a trace
+	ip link add link br0 name br0.20 type vlan id 20
+	ip -6 address add 2001:db8:1::1/64 dev br0.20
+	ip link del dev br0.20
+
+	log_test "vlan interface deletion"
+
+	ip link del dev br0
+}
+
+bridge_deletion_test()
+{
+	# Test that when a bridge with VLAN interfaces is deleted, we correctly
+	# delete the associated RIFs. See commit 602b74eda813 ("mlxsw:
+	# spectrum_switchdev: Do not leak RIFs when removing bridge") for more
+	# details
+	RET=0
+
+	ip link add name br0 type bridge vlan_filtering 1
+	ip link set dev $swp1 master br0
+	ip -6 address add 2001:db8::1/64 dev br0
+
+	ip link add link br0 name br0.10 type vlan id 10
+	ip -6 address add 2001:db8:1::1/64 dev br0.10
+
+	ip link add link br0 name br0.20 type vlan id 20
+	ip -6 address add 2001:db8:2::1/64 dev br0.20
+
+	ip link del dev br0
+
+	# If we leaked previous RIFs, then this should produce a trace
+	ip -6 address add 2001:db8:1::1/64 dev $swp1
+	ip -6 address del 2001:db8:1::1/64 dev $swp1
+
+	log_test "bridge deletion"
+}
+
+bridge_vlan_flags_test()
+{
+	# Test that when bridge VLAN flags are toggled, we do not take
+	# unnecessary references on related structs. See commit 9e25826ffc94
+	# ("mlxsw: spectrum_switchdev: Fix port_vlan refcounting") for more
+	# details
+	RET=0
+
+	ip link add name br0 type bridge vlan_filtering 1
+	ip link set dev $swp1 master br0
+
+	bridge vlan add vid 10 dev $swp1 pvid untagged
+	bridge vlan add vid 10 dev $swp1 untagged
+	bridge vlan add vid 10 dev $swp1 pvid
+	bridge vlan add vid 10 dev $swp1
+	ip link del dev br0
+
+	# If we did not handle references correctly, then this should produce a
+	# trace
+	devlink dev reload "$DEVLINK_DEV"
+
+	# Allow netdevices to be re-created following the reload
+	sleep 20
+
+	log_test "bridge vlan flags"
+}
+
+vlan_1_test()
+{
+	# Test that VLAN 1 cannot be configured, as it is used internally for
+	# untagged traffic. See commit 47bf9df2e820 ("mlxsw: spectrum: Forbid
+	# creation of VLAN 1 over port/LAG") for more details
+	RET=0
+
+	ip link add link $swp1 name $swp1.1 type vlan id 1 &> /dev/null
+	check_fail $? "managed to create vlan 1 when should not"
+
+	log_test "vlan 1"
+}
+
+lag_bridge_upper_test()
+{
+	# Test that ports cannot be enslaved to LAG devices that have uppers
+	# and that failure is handled gracefully. See commit b3529af6bb0d
+	# ("spectrum: Reference count VLAN entries") for more details
+	RET=0
+
+	ip link add name bond1 type bond mode 802.3ad
+
+	ip link add name br0 type bridge vlan_filtering 1
+	ip link set dev bond1 master br0
+
+	ip link set dev $swp1 down
+	ip link set dev $swp1 master bond1 &> /dev/null
+	check_fail $? "managed to enslave port to lag when should not"
+
+	# This might generate a trace, if we did not handle the failure
+	# correctly
+	ip -6 address add 2001:db8:1::1/64 dev $swp1
+	ip -6 address del 2001:db8:1::1/64 dev $swp1
+
+	log_test "lag with bridge upper"
+
+	ip link del dev br0
+	ip link del dev bond1
+}
+
+duplicate_vlans_test()
+{
+	# Test that on a given port a VLAN is only used once. Either as VLAN
+	# in a VLAN-aware bridge or as a VLAN device
+	RET=0
+
+	ip link add name br0 type bridge vlan_filtering 1
+	ip link set dev $swp1 master br0
+	bridge vlan add vid 10 dev $swp1
+
+	ip link add link $swp1 name $swp1.10 type vlan id 10 &> /dev/null
+	check_fail $? "managed to create vlan device when should not"
+
+	bridge vlan del vid 10 dev $swp1
+	ip link add link $swp1 name $swp1.10 type vlan id 10
+	check_err $? "did not manage to create vlan device when should"
+	bridge vlan add vid 10 dev $swp1 &> /dev/null
+	check_fail $? "managed to add bridge vlan when should not"
+
+	log_test "duplicate vlans"
+
+	ip link del dev $swp1.10
+	ip link del dev br0
+}
+
+vlan_rif_refcount_test()
+{
+	# Test that RIFs representing VLAN interfaces are not affected from
+	# ports member in the VLAN. We use the offload indication on routes
+	# configured on the RIF to understand if it was created / destroyed
+	RET=0
+
+	ip link add name br0 type bridge vlan_filtering 1
+	ip link set dev $swp1 master br0
+
+	ip link set dev $swp1 up
+	ip link set dev br0 up
+
+	ip link add link br0 name br0.10 up type vlan id 10
+	ip -6 address add 2001:db8:1::1/64 dev br0.10
+
+	ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 | grep -q offload
+	check_err $? "vlan rif was not created before adding port to vlan"
+
+	bridge vlan add vid 10 dev $swp1
+	ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 | grep -q offload
+	check_err $? "vlan rif was destroyed after adding port to vlan"
+
+	bridge vlan del vid 10 dev $swp1
+	ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 | grep -q offload
+	check_err $? "vlan rif was destroyed after removing port from vlan"
+
+	ip link set dev $swp1 nomaster
+	ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 | grep -q offload
+	check_fail $? "vlan rif was not destroyed after unlinking port from bridge"
+
+	log_test "vlan rif refcount"
+
+	ip link del dev br0.10
+	ip link set dev $swp1 down
+	ip link del dev br0
+}
+
+subport_rif_refcount_test()
+{
+	# Test that RIFs representing upper devices of physical ports are
+	# reference counted correctly and destroyed when should. We use the
+	# offload indication on routes configured on the RIF to understand if
+	# it was created / destroyed
+	RET=0
+
+	ip link add name bond1 type bond mode 802.3ad
+	ip link set dev $swp1 down
+	ip link set dev $swp2 down
+	ip link set dev $swp1 master bond1
+	ip link set dev $swp2 master bond1
+
+	ip link set dev bond1 up
+	ip link add link bond1 name bond1.10 up type vlan id 10
+	ip -6 address add 2001:db8:1::1/64 dev bond1
+	ip -6 address add 2001:db8:2::1/64 dev bond1.10
+
+	ip -6 route get fibmatch 2001:db8:1::2 dev bond1 | grep -q offload
+	check_err $? "subport rif was not created on lag device"
+	ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 | grep -q offload
+	check_err $? "subport rif was not created on vlan device"
+
+	ip link set dev $swp1 nomaster
+	ip -6 route get fibmatch 2001:db8:1::2 dev bond1 | grep -q offload
+	check_err $? "subport rif of lag device was destroyed when should not"
+	ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 | grep -q offload
+	check_err $? "subport rif of vlan device was destroyed when should not"
+
+	ip link set dev $swp2 nomaster
+	ip -6 route get fibmatch 2001:db8:1::2 dev bond1 | grep -q offload
+	check_fail $? "subport rif of lag device was not destroyed when should"
+	ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 | grep -q offload
+	check_fail $? "subport rif of vlan device was not destroyed when should"
+
+	log_test "subport rif refcount"
+
+	ip link del dev bond1.10
+	ip link del dev bond1
+}
+
+vlan_dev_deletion_test()
+{
+	# Test that VLAN devices are correctly deleted / unlinked when enslaved
+	# to bridge
+	RET=0
+
+	ip link add name br10 type bridge
+	ip link add name br20 type bridge
+	ip link add name br30 type bridge
+	ip link add link $swp1 name $swp1.10 type vlan id 10
+	ip link add link $swp1 name $swp1.20 type vlan id 20
+	ip link add link $swp1 name $swp1.30 type vlan id 30
+	ip link set dev $swp1.10 master br10
+	ip link set dev $swp1.20 master br20
+	ip link set dev $swp1.30 master br30
+
+	# If we did not handle the situation correctly, then these operations
+	# might produce a trace
+	ip link set dev $swp1.30 nomaster
+	ip link del dev $swp1.20
+	# Deletion via ioctl uses different code paths from netlink
+	vconfig rem $swp1.10 &> /dev/null
+
+	log_test "vlan device deletion"
+
+	ip link del dev $swp1.30
+	ip link del dev br30
+	ip link del dev br20
+	ip link del dev br10
+}
+
+lag_create()
+{
+	ip link add name bond1 type bond mode 802.3ad
+	ip link set dev $swp1 down
+	ip link set dev $swp2 down
+	ip link set dev $swp1 master bond1
+	ip link set dev $swp2 master bond1
+
+	ip link add link bond1 name bond1.10 type vlan id 10
+	ip link add link bond1 name bond1.20 type vlan id 20
+
+	ip link add name br0 type bridge vlan_filtering 1
+	ip link set dev bond1 master br0
+
+	ip link add name br10 type bridge
+	ip link set dev bond1.10 master br10
+
+	ip link add name br20 type bridge
+	ip link set dev bond1.20 master br20
+}
+
+lag_unlink_slaves_test()
+{
+	# Test that ports are correctly unlinked from their LAG master, when
+	# the LAG and its VLAN uppers are enslaved to bridges
+	RET=0
+
+	lag_create
+
+	ip link set dev $swp1 nomaster
+	check_err $? "lag slave $swp1 was not unlinked from master"
+	ip link set dev $swp2 nomaster
+	check_err $? "lag slave $swp2 was not unlinked from master"
+
+	# Try to configure corresponding VLANs as router interfaces
+	ip -6 address add 2001:db8:1::1/64 dev $swp1
+	check_err $? "failed to configure ip address on $swp1"
+
+	ip link add link $swp1 name $swp1.10 type vlan id 10
+	ip -6 address add 2001:db8:10::1/64 dev $swp1.10
+	check_err $? "failed to configure ip address on $swp1.10"
+
+	ip link add link $swp1 name $swp1.20 type vlan id 20
+	ip -6 address add 2001:db8:20::1/64 dev $swp1.20
+	check_err $? "failed to configure ip address on $swp1.20"
+
+	log_test "lag slaves unlinking"
+
+	ip link del dev $swp1.20
+	ip link del dev $swp1.10
+	ip address flush dev $swp1
+
+	ip link del dev br20
+	ip link del dev br10
+	ip link del dev br0
+	ip link del dev bond1
+}
+
+lag_dev_deletion_test()
+{
+	# Test that LAG device is correctly deleted, when the LAG and its VLAN
+	# uppers are enslaved to bridges
+	RET=0
+
+	lag_create
+
+	ip link del dev bond1
+
+	log_test "lag device deletion"
+
+	ip link del dev br20
+	ip link del dev br10
+	ip link del dev br0
+}
+
+vlan_interface_uppers_test()
+{
+	# Test that uppers of a VLAN interface are correctly sanitized
+	RET=0
+
+	ip link add name br0 type bridge vlan_filtering 1
+	ip link set dev $swp1 master br0
+
+	ip link add link br0 name br0.10 type vlan id 10
+	ip link add link br0.10 name macvlan0 \
+		type macvlan mode private &> /dev/null
+	check_fail $? "managed to create a macvlan when should not"
+
+	ip -6 address add 2001:db8:1::1/64 dev br0.10
+	ip link add link br0.10 name macvlan0 type macvlan mode private
+	check_err $? "did not manage to create a macvlan when should"
+
+	ip link del dev macvlan0
+
+	ip link add name vrf-test type vrf table 10
+	ip link set dev br0.10 master vrf-test
+	check_err $? "did not manage to enslave vlan interface to vrf"
+	ip link del dev vrf-test
+
+	ip link add name br-test type bridge
+	ip link set dev br0.10 master br-test &> /dev/null
+	check_fail $? "managed to enslave vlan interface to bridge when should not"
+	ip link del dev br-test
+
+	log_test "vlan interface uppers"
+
+	ip link del dev br0
+}
+
+devlink_reload_test()
+{
+	# Test that after executing all the above configuration tests, a
+	# devlink reload can be performed without errors
+	RET=0
+
+	devlink dev reload "$DEVLINK_DEV"
+	check_err $? "devlink reload failed"
+
+	log_test "devlink reload - last test"
+
+	sleep 20
+}
+
 trap cleanup EXIT
 
 setup_prepare