diff options
author | Steven Rostedt <srostedt@redhat.com> | 2012-05-22 00:11:00 -0400 |
---|---|---|
committer | Steven Rostedt <rostedt@goodmis.org> | 2012-05-22 00:11:00 -0400 |
commit | 2e109526225a560ef49d49a3bbae62f5cf3ad806 (patch) | |
tree | 2fcb7963e0a04e3be5a4c9807d9722235486b382 /tools | |
parent | 3a7bef7917f8fd103197b4cc5969a3125d45deec (diff) | |
download | linux-2e109526225a560ef49d49a3bbae62f5cf3ad806.tar.bz2 |
ktest: Add an example config that does cross compiling of several archs
Add the config that I use to test several archs. I downloaded several
cross compilers from:
http://kernel.org/pub/tools/crosstool/files/bin/x86_64/
and this config is an example to crosscompile several archs to make sure
that your changes do not break archs that you are not working on.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Diffstat (limited to 'tools')
-rw-r--r-- | tools/testing/ktest/examples/crosstests.conf | 260 |
1 files changed, 260 insertions, 0 deletions
diff --git a/tools/testing/ktest/examples/crosstests.conf b/tools/testing/ktest/examples/crosstests.conf new file mode 100644 index 000000000000..46736604c26c --- /dev/null +++ b/tools/testing/ktest/examples/crosstests.conf @@ -0,0 +1,260 @@ +# +# Example config for cross compiling +# +# In this config, it is expected that the tool chains from: +# +# http://kernel.org/pub/tools/crosstool/files/bin/x86_64/ +# +# running on a x86_64 system have been downloaded and installed into: +# +# /usr/local/ +# +# such that the compiler binaries are something like: +# +# /usr/local/gcc-4.5.2-nolibc/mips-linux/bin/mips-linux-gcc +# +# Some of the archs will use gcc-4.5.1 instead of gcc-4.5.2 +# this config uses variables to differentiate them. +# +# Comments describe some of the options, but full descriptions of +# options are described in the samples.conf file. + +# ${PWD} is defined by ktest.pl to be the directory that the user +# was in when they executed ktest.pl. It may be better to hardcode the +# path name here. THIS_DIR is the variable used through out the config file +# in case you want to change it. + +THIS_DIR := ${PWD} + +# Update the BUILD_DIR option to the location of your git repo you want to test. +BUILD_DIR = ${THIS_DIR}/linux.git + +# The build will go into this directory. It will be created when you run the test. +OUTPUT_DIR = ${THIS_DIR}/cross-compile + +# The build will be compiled with -j8 +BUILD_OPTIONS = -j8 + +# The test will not stop when it hits a failure. +DIE_ON_FAILURE = 0 + +# If you want to have ktest.pl store the failure somewhere, uncomment this option +# and change the directory where ktest should store the failures. +#STORE_FAILURES = ${THIS_DIR}/failures + +# The log file is stored in the OUTPUT_DIR called cross.log +# If you enable this, you need to create the OUTPUT_DIR. It wont be created for you. +LOG_FILE = ${OUTPUT_DIR}/cross.log + +# The log file will be cleared each time you run ktest. +CLEAR_LOG = 1 + +# As some archs do not build with the defconfig, they have been marked +# to be ignored. If you want to test them anyway, change DO_FAILED to 1. +# If a test that has been marked as DO_FAILED passes, then you should change +# that test to be DO_DEFAULT + +DO_FAILED := 0 +DO_DEFAULT := 1 + +# By setting both DO_FAILED and DO_DEFAULT to zero, you can pick a single +# arch that you want to test. (uncomment RUN and chose your arch) +#RUN := m32r + +# At the bottom of the config file exists a bisect test. You can update that +# test and set DO_FAILED and DO_DEFAULT to zero, and uncomment this variable +# to run the bisect on the arch. +#RUN := bisect + +# By default all tests will be running gcc 4.5.2. Some tests are using 4.5.1 +# and they select that in the test. +# Note: GCC_VER is declared as on option and not a variable ('=' instead of ':=') +# This is important. A variable is used only in the config file and if it is set +# it stays that way for the rest of the config file until it is change again. +# Here we want GCC_VER to remain persistent and change for each test, as it is used in +# the MAKE_CMD. By using '=' instead of ':=' we achieve our goal. + +GCC_VER = 4.5.2 +MAKE_CMD = PATH=/usr/local/gcc-${GCC_VER}-nolibc/${CROSS}/bin:$PATH CROSS_COMPILE=${CROSS}- make ARCH=${ARCH} + +# all tests are only doing builds. +TEST_TYPE = build + +# If you want to add configs on top of the defconfig, you can add those configs into +# the add-config file and uncomment this option. This is useful if you want to test +# all cross compiles with PREEMPT set, or TRACING on, etc. +#ADD_CONFIG = ${THIS_DIR}/add-config + +# All tests are using defconfig +BUILD_TYPE = defconfig + +# The test names will have the arch and cross compiler used. This will be shown in +# the results. +TEST_NAME = ${ARCH} ${CROSS} + +# alpha +TEST_START IF ${RUN} == alpha || ${DO_DEFAULT} +# Notice that CROSS and ARCH are also options and not variables (again '=' instead +# of ':='). This is because TEST_NAME and MAKE_CMD wil use them for each test. +# Only options are available during runs. Variables are only present in parsing the +# config file. +CROSS = alpha-linux +ARCH = alpha + +# arm +TEST_START IF ${RUN} == arm || ${DO_DEFAULT} +CROSS = arm-unknown-linux-gnueabi +ARCH = arm + +# black fin +TEST_START IF ${RUN} == bfin || ${DO_DEFAULT} +CROSS = bfin-uclinux +ARCH = blackfin +BUILD_OPTIONS = -j8 vmlinux + +# cris - FAILS? +TEST_START IF ${RUN} == cris || ${RUN} == cris64 || ${DO_FAILED} +CROSS = cris-linux +ARCH = cris + +# cris32 - not right arch? +TEST_START IF ${RUN} == cris || ${RUN} == cris32 || ${DO_FAILED} +CROSS = crisv32-linux +ARCH = cris + +# ia64 +TEST_START IF ${RUN} == ia64 || ${DO_DEFAULT} +CROSS = ia64-linux +ARCH = ia64 + +# frv +TEST_START IF ${RUN} == frv || ${DO_FAILED} +CROSS = frv-linux +ARCH = frv +GCC_VER = 4.5.1 + +# h8300 - failed make defconfig?? +TEST_START IF ${RUN} == h8300 || ${DO_FAILED} +CROSS = h8300-elf +ARCH = h8300 +GCC_VER = 4.5.1 + +# m68k fails with error? +TEST_START IF ${RUN} == m68k || ${DO_DEFAULT} +CROSS = m68k-linux +ARCH = m68k + +# mips64 +TEST_START IF ${RUN} == mips || ${RUN} == mips64 || ${DO_DEFAULT} +CROSS = mips64-linux +ARCH = mips + +# mips32 +TEST_START IF ${RUN} == mips || ${RUN} == mips32 || ${DO_DEFAULT} +CROSS = mips-linux +ARCH = mips + +# m32r +TEST_START IF ${RUN} == m32r || ${DO_FAILED} +CROSS = m32r-linux +ARCH = m32r +GCC_VER = 4.5.1 +BUILD_OPTIONS = -j8 vmlinux + +# parisc64 failed? +TEST_START IF ${RUN} == hppa || ${RUN} == hppa64 || ${DO_FAILED} +CROSS = hppa64-linux +ARCH = parisc + +# parisc +TEST_START IF ${RUN} == hppa || ${RUN} == hppa32 || ${DO_FAILED} +CROSS = hppa-linux +ARCH = parisc + +# ppc +TEST_START IF ${RUN} == ppc || ${RUN} == ppc32 || ${DO_DEFAULT} +CROSS = powerpc-linux +ARCH = powerpc + +# ppc64 +TEST_START IF ${RUN} == ppc || ${RUN} == ppc64 || ${DO_DEFAULT} +CROSS = powerpc64-linux +ARCH = powerpc + +# s390 +TEST_START IF ${RUN} == s390 || ${DO_DEFAULT} +CROSS = s390x-linux +ARCH = s390 + +# sh +TEST_START IF ${RUN} == sh || ${DO_DEFAULT} +CROSS = sh4-linux +ARCH = sh + +# sparc64 +TEST_START IF ${RUN} == sparc || ${RUN} == sparc64 || ${DO_DEFAULT} +CROSS = sparc64-linux +ARCH = sparc64 + +# sparc +TEST_START IF ${RUN} == sparc || ${RUN} == sparc32 || ${DO_DEFAULT} +CROSS = sparc-linux +ARCH = sparc + +# xtensa failed +TEST_START IF ${RUN} == xtensa || ${DO_FAILED} +CROSS = xtensa-linux +ARCH = xtensa + +# UML +TEST_START IF ${RUN} == uml || ${DO_DEFAULT} +MAKE_CMD = make ARCH=um SUBARCH=x86_64 +ARCH = uml +CROSS = + +TEST_START IF ${RUN} == x86 || ${RUN} == i386 || ${DO_DEFAULT} +MAKE_CMD = make ARCH=i386 +ARCH = i386 +CROSS = + +TEST_START IF ${RUN} == x86 || ${RUN} == x86_64 || ${DO_DEFAULT} +MAKE_CMD = make ARCH=x86_64 +ARCH = x86_64 +CROSS = + +################################# + +# This is a bisect if needed. You need to give it a MIN_CONFIG that +# will be the config file it uses. Basically, just copy the created defconfig +# for the arch someplace and point MIN_CONFIG to it. +TEST_START IF ${RUN} == bisect +MIN_CONFIG = ${THIS_DIR}/min-config +CROSS = s390x-linux +ARCH = s390 +TEST_TYPE = bisect +BISECT_TYPE = build +BISECT_GOOD = v3.1 +BISECT_BAD = v3.2 +CHECKOUT = v3.2 + +################################# + +# These defaults are needed to keep ktest.pl from complaining. They are +# ignored because the test does not go pass the build. No install or +# booting of the target images. + +DEFAULTS +MACHINE = crosstest +SSH_USER = root +BUILD_TARGET = cross +TARGET_IMAGE = image +POWER_CYCLE = cycle +CONSOLE = console +LOCALVERSION = version +GRUB_MENU = grub + +REBOOT_ON_ERROR = 0 +POWEROFF_ON_ERROR = 0 +POWEROFF_ON_SUCCESS = 0 +REBOOT_ON_SUCCESS = 0 + |