Merge tag 'net-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from can, rxrpc and wireguard.

  Previous releases - regressions:

   - igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter()

   - mld: respect RCU rules in ip6_mc_source() and ip6_mc_msfilter()

   - rds: acquire netns refcount on TCP sockets

   - rxrpc: enable IPv6 checksums on transport socket

   - nic: hinic: fix bug of wq out of bound access

   - nic: thunder: don't use pci_irq_vector() in atomic context

   - nic: bnxt_en: fix possible bnxt_open() failure caused by wrong RFS
     flag

   - nic: mlx5e:
      - lag, fix use-after-free in fib event handler
      - fix deadlock in sync reset flow

  Previous releases - always broken:

   - tcp: fix insufficient TCP source port randomness

   - can: grcan: grcan_close(): fix deadlock

   - nfc: reorder destructive operations in to avoid bugs

  Misc:

   - wireguard: improve selftests reliability"

* tag 'net-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
  NFC: netlink: fix sleep in atomic bug when firmware download timeout
  selftests: ocelot: tc_flower_chains: specify conform-exceed action for policer
  tcp: drop the hash_32() part from the index calculation
  tcp: increase source port perturb table to 2^16
  tcp: dynamically allocate the perturb table used by source ports
  tcp: add small random increments to the source port
  tcp: resalt the secret every 10 seconds
  tcp: use different parts of the port_offset for index and offset
  secure_seq: use the 64 bits of the siphash for port offset calculation
  wireguard: selftests: set panic_on_warn=1 from cmdline
  wireguard: selftests: bump package deps
  wireguard: selftests: restore support for ccache
  wireguard: selftests: use newer toolchains to fill out architectures
  wireguard: selftests: limit parallelism to $(nproc) tests at once
  wireguard: selftests: make routing loop test non-fatal
  net/mlx5: Fix matching on inner TTC
  net/mlx5: Avoid double clear or set of sync reset requested
  net/mlx5: Fix deadlock in sync reset flow
  net/mlx5e: Fix trust state reset in reload
  net/mlx5e: Avoid checking offload capability in post_parse action
  ...

26 files changed, 269 insertions, 103 deletions

diff --git a/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh b/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh
index eaf8a04a7ca5..10e54bcca7a9 100755
--- a/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh
+++ b/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh
@@ -190,7 +190,7 @@ setup_prepare()
 
 	tc filter add dev $eth0 ingress chain $(IS2 0 0) pref 1 \
 		protocol ipv4 flower skip_sw ip_proto udp dst_port 5201 \
-		action police rate 50mbit burst 64k \
+		action police rate 50mbit burst 64k conform-exceed drop/pipe \
 		action goto chain $(IS2 1 0)
 }
 
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
index 3fe2515aa616..0f2ebc38d893 100644
--- a/tools/testing/selftests/net/Makefile
+++ b/tools/testing/selftests/net/Makefile
@@ -30,7 +30,7 @@ TEST_PROGS += ioam6.sh
 TEST_PROGS += gro.sh
 TEST_PROGS += gre_gso.sh
 TEST_PROGS += cmsg_so_mark.sh
-TEST_PROGS += cmsg_time.sh
+TEST_PROGS += cmsg_time.sh cmsg_ipv6.sh
 TEST_PROGS += srv6_end_dt46_l3vpn_test.sh
 TEST_PROGS += srv6_end_dt4_l3vpn_test.sh
 TEST_PROGS += srv6_end_dt6_l3vpn_test.sh
@@ -54,6 +54,7 @@ TEST_GEN_PROGS = reuseport_bpf reuseport_bpf_cpu reuseport_bpf_numa
 TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls
 TEST_GEN_FILES += toeplitz
 TEST_GEN_FILES += cmsg_sender
+TEST_PROGS += test_vxlan_vnifiltering.sh
 
 TEST_FILES := settings
 
diff --git a/tools/testing/selftests/net/forwarding/Makefile b/tools/testing/selftests/net/forwarding/Makefile
index 8fa97ae9af9e..c87e674b61b1 100644
--- a/tools/testing/selftests/net/forwarding/Makefile
+++ b/tools/testing/selftests/net/forwarding/Makefile
@@ -2,15 +2,31 @@
 
 TEST_PROGS = bridge_igmp.sh \
 	bridge_locked_port.sh \
+	bridge_mld.sh \
 	bridge_port_isolation.sh \
 	bridge_sticky_fdb.sh \
 	bridge_vlan_aware.sh \
+	bridge_vlan_mcast.sh \
 	bridge_vlan_unaware.sh \
+	custom_multipath_hash.sh \
+	dual_vxlan_bridge.sh \
+	ethtool_extended_state.sh \
 	ethtool.sh \
+	gre_custom_multipath_hash.sh \
 	gre_inner_v4_multipath.sh \
 	gre_inner_v6_multipath.sh \
+	gre_multipath_nh_res.sh \
+	gre_multipath_nh.sh \
 	gre_multipath.sh \
+	hw_stats_l3.sh \
 	ip6_forward_instats_vrf.sh \
+	ip6gre_custom_multipath_hash.sh \
+	ip6gre_flat_key.sh \
+	ip6gre_flat_keys.sh \
+	ip6gre_flat.sh \
+	ip6gre_hier_key.sh \
+	ip6gre_hier_keys.sh \
+	ip6gre_hier.sh \
 	ip6gre_inner_v4_multipath.sh \
 	ip6gre_inner_v6_multipath.sh \
 	ipip_flat_gre_key.sh \
@@ -34,36 +50,53 @@ TEST_PROGS = bridge_igmp.sh \
 	mirror_gre_vlan_bridge_1q.sh \
 	mirror_gre_vlan.sh \
 	mirror_vlan.sh \
+	pedit_dsfield.sh \
+	pedit_ip.sh \
+	pedit_l4port.sh \
+	q_in_vni_ipv6.sh \
+	q_in_vni.sh \
 	router_bridge.sh \
 	router_bridge_vlan.sh \
 	router_broadcast.sh \
+	router_mpath_nh_res.sh \
 	router_mpath_nh.sh \
 	router_multicast.sh \
 	router_multipath.sh \
+	router_nh.sh \
 	router.sh \
 	router_vid_1.sh \
 	sch_ets.sh \
+	sch_red.sh \
 	sch_tbf_ets.sh \
 	sch_tbf_prio.sh \
 	sch_tbf_root.sh \
+	skbedit_priority.sh \
 	tc_actions.sh \
 	tc_chains.sh \
 	tc_flower_router.sh \
 	tc_flower.sh \
 	tc_mpls_l2vpn.sh \
+	tc_police.sh \
 	tc_shblocks.sh \
 	tc_vlan_modify.sh \
+	vxlan_asymmetric_ipv6.sh \
 	vxlan_asymmetric.sh \
+	vxlan_bridge_1d_ipv6.sh \
+	vxlan_bridge_1d_port_8472_ipv6.sh \
 	vxlan_bridge_1d_port_8472.sh \
 	vxlan_bridge_1d.sh \
+	vxlan_bridge_1q_ipv6.sh \
+	vxlan_bridge_1q_port_8472_ipv6.sh
 	vxlan_bridge_1q_port_8472.sh \
 	vxlan_bridge_1q.sh \
+	vxlan_symmetric_ipv6.sh \
 	vxlan_symmetric.sh
 
 TEST_PROGS_EXTENDED := devlink_lib.sh \
 	ethtool_lib.sh \
 	fib_offload_lib.sh \
 	forwarding.config.sample \
+	ip6gre_lib.sh \
 	ipip_lib.sh \
 	lib.sh \
 	mirror_gre_lib.sh \
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q.sh b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q.sh
index a3402cd8d5b6..9ff22f28032d 100755
--- a/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q.sh
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q.sh
@@ -61,9 +61,12 @@ setup_prepare()
 
 	vrf_prepare
 	mirror_gre_topo_create
+	# Avoid changing br1's PVID while it is operational as a L3 interface.
+	ip link set dev br1 down
 
 	ip link set dev $swp3 master br1
 	bridge vlan add dev br1 vid 555 pvid untagged self
+	ip link set dev br1 up
 	ip address add dev br1 192.0.2.129/28
 	ip address add dev br1 2001:db8:2::1/64
 
diff --git a/tools/testing/selftests/net/so_txtime.c b/tools/testing/selftests/net/so_txtime.c
index 59067f64b775..2672ac0b6d1f 100644
--- a/tools/testing/selftests/net/so_txtime.c
+++ b/tools/testing/selftests/net/so_txtime.c
@@ -421,7 +421,7 @@ static void usage(const char *progname)
 			"Options:\n"
 			"  -4            only IPv4\n"
 			"  -6            only IPv6\n"
-			"  -c <clock>    monotonic (default) or tai\n"
+			"  -c <clock>    monotonic or tai (default)\n"
 			"  -D <addr>     destination IP address (server)\n"
 			"  -S <addr>     source IP address (client)\n"
 			"  -r            run rx mode\n"
@@ -475,7 +475,7 @@ static void parse_opts(int argc, char **argv)
 			cfg_rx = true;
 			break;
 		case 't':
-			cfg_start_time_ns = strtol(optarg, NULL, 0);
+			cfg_start_time_ns = strtoll(optarg, NULL, 0);
 			break;
 		case 'm':
 			cfg_mark = strtol(optarg, NULL, 0);
diff --git a/tools/testing/selftests/wireguard/netns.sh b/tools/testing/selftests/wireguard/netns.sh
index 8a9461aa0878..69c7796c7ca9 100755
--- a/tools/testing/selftests/wireguard/netns.sh
+++ b/tools/testing/selftests/wireguard/netns.sh
@@ -22,10 +22,12 @@
 # interfaces in $ns1 and $ns2. See https://www.wireguard.com/netns/ for further
 # details on how this is accomplished.
 set -e
+shopt -s extglob
 
 exec 3>&1
 export LANG=C
 export WG_HIDE_KEYS=never
+NPROC=( /sys/devices/system/cpu/cpu+([0-9]) ); NPROC=${#NPROC[@]}
 netns0="wg-test-$$-0"
 netns1="wg-test-$$-1"
 netns2="wg-test-$$-2"
@@ -143,17 +145,15 @@ tests() {
 	n1 iperf3 -Z -t 3 -b 0 -u -c fd00::2
 
 	# TCP over IPv4, in parallel
-	for max in 4 5 50; do
-		local pids=( )
-		for ((i=0; i < max; ++i)) do
-			n2 iperf3 -p $(( 5200 + i )) -s -1 -B 192.168.241.2 &
-			pids+=( $! ); waitiperf $netns2 $! $(( 5200 + i ))
-		done
-		for ((i=0; i < max; ++i)) do
-			n1 iperf3 -Z -t 3 -p $(( 5200 + i )) -c 192.168.241.2 &
-		done
-		wait "${pids[@]}"
+	local pids=( ) i
+	for ((i=0; i < NPROC; ++i)) do
+		n2 iperf3 -p $(( 5200 + i )) -s -1 -B 192.168.241.2 &
+		pids+=( $! ); waitiperf $netns2 $! $(( 5200 + i ))
 	done
+	for ((i=0; i < NPROC; ++i)) do
+		n1 iperf3 -Z -t 3 -p $(( 5200 + i )) -c 192.168.241.2 &
+	done
+	wait "${pids[@]}"
 }
 
 [[ $(ip1 link show dev wg0) =~ mtu\ ([0-9]+) ]] && orig_mtu="${BASH_REMATCH[1]}"
@@ -280,7 +280,19 @@ read _ _ tx_bytes_before < <(n0 wg show wg1 transfer)
 ! n0 ping -W 1 -c 10 -f 192.168.241.2 || false
 sleep 1
 read _ _ tx_bytes_after < <(n0 wg show wg1 transfer)
-(( tx_bytes_after - tx_bytes_before < 70000 ))
+if ! (( tx_bytes_after - tx_bytes_before < 70000 )); then
+	errstart=$'\x1b[37m\x1b[41m\x1b[1m'
+	errend=$'\x1b[0m'
+	echo "${errstart}                                                ${errend}"
+	echo "${errstart}                   E  R  R  O  R                ${errend}"
+	echo "${errstart}                                                ${errend}"
+	echo "${errstart} This architecture does not do the right thing  ${errend}"
+	echo "${errstart} with cross-namespace routing loops. This test  ${errend}"
+	echo "${errstart} has thus technically failed but, as this issue ${errend}"
+	echo "${errstart} is as yet unsolved, these tests will continue  ${errend}"
+	echo "${errstart} onward. :(                                     ${errend}"
+	echo "${errstart}                                                ${errend}"
+fi
 
 ip0 link del wg1
 ip1 link del wg0
diff --git a/tools/testing/selftests/wireguard/qemu/.gitignore b/tools/testing/selftests/wireguard/qemu/.gitignore
index bfa15e6feb2f..42ab9d72b37b 100644
--- a/tools/testing/selftests/wireguard/qemu/.gitignore
+++ b/tools/testing/selftests/wireguard/qemu/.gitignore
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 build/
 distfiles/
+ccache/
diff --git a/tools/testing/selftests/wireguard/qemu/Makefile b/tools/testing/selftests/wireguard/qemu/Makefile
index 4bdd6c1a19d3..bca07b93eeb0 100644
--- a/tools/testing/selftests/wireguard/qemu/Makefile
+++ b/tools/testing/selftests/wireguard/qemu/Makefile
@@ -4,26 +4,24 @@
 
 PWD := $(shell pwd)
 
-CHOST := $(shell gcc -dumpmachine)
-HOST_ARCH := $(firstword $(subst -, ,$(CHOST)))
-ifneq (,$(ARCH))
-CBUILD := $(subst -gcc,,$(lastword $(subst /, ,$(firstword $(wildcard $(foreach bindir,$(subst :, ,$(PATH)),$(bindir)/$(ARCH)-*-gcc))))))
-ifeq (,$(CBUILD))
-$(error The toolchain for $(ARCH) is not installed)
-endif
-else
-CBUILD := $(CHOST)
-ARCH := $(firstword $(subst -, ,$(CBUILD)))
-endif
-
 # Set these from the environment to override
 KERNEL_PATH ?= $(PWD)/../../../../..
 BUILD_PATH ?= $(PWD)/build/$(ARCH)
 DISTFILES_PATH ?= $(PWD)/distfiles
 NR_CPUS ?= 4
+ARCH ?=
+CBUILD := $(shell gcc -dumpmachine)
+HOST_ARCH := $(firstword $(subst -, ,$(CBUILD)))
+ifeq ($(ARCH),)
+ARCH := $(HOST_ARCH)
+endif
 
 MIRROR := https://download.wireguard.com/qemu-test/distfiles/
 
+KERNEL_BUILD_PATH := $(BUILD_PATH)/kernel$(if $(findstring yes,$(DEBUG_KERNEL)),-debug)
+rwildcard=$(foreach d,$(wildcard $1*),$(call rwildcard,$d/,$2) $(filter $(subst *,%,$2),$d))
+WIREGUARD_SOURCES := $(call rwildcard,$(KERNEL_PATH)/drivers/net/wireguard/,*)
+
 default: qemu
 
 # variable name, tarball project name, version, tarball extension, default URI base
@@ -36,42 +34,33 @@ $(call file_download,$$($(1)_NAME)$(4),$(5),$(6))
 endef
 
 define file_download =
-$(DISTFILES_PATH)/$(1):
+$(DISTFILES_PATH)/$(1): | $(4)
 	mkdir -p $(DISTFILES_PATH)
-	flock -x $$@.lock -c '[ -f $$@ ] && exit 0; wget -O $$@.tmp $(MIRROR)$(1) || wget -O $$@.tmp $(2)$(1) || rm -f $$@.tmp; [ -f $$@.tmp ] || exit 1; if echo "$(3)  $$@.tmp" | sha256sum -c -; then mv $$@.tmp $$@; else rm -f $$@.tmp; exit 71; fi'
+	flock -x $$@.lock -c '[ -f $$@ ] && exit 0; wget -O $$@.tmp $(MIRROR)$(1) || wget -O $$@.tmp $(2)$(1) || rm -f $$@.tmp; [ -f $$@.tmp ] || exit 1; if ([ -n "$(4)" ] && sed -n "s#^\([a-f0-9]\{64\}\)  \($(1)\)\$$$$#\1  $(DISTFILES_PATH)/\2.tmp#p" "$(4)" || echo "$(3)  $$@.tmp") | sha256sum -c -; then mv $$@.tmp $$@; else rm -f $$@.tmp; exit 71; fi'
 endef
 
-$(eval $(call tar_download,MUSL,musl,1.2.0,.tar.gz,https://musl.libc.org/releases/,c6de7b191139142d3f9a7b5b702c9cae1b5ee6e7f57e582da9328629408fd4e8))
-$(eval $(call tar_download,IPERF,iperf,3.7,.tar.gz,https://downloads.es.net/pub/iperf/,d846040224317caf2f75c843d309a950a7db23f9b44b94688ccbe557d6d1710c))
-$(eval $(call tar_download,BASH,bash,5.0,.tar.gz,https://ftp.gnu.org/gnu/bash/,b4a80f2ac66170b2913efbfb9f2594f1f76c7b1afd11f799e22035d63077fb4d))
-$(eval $(call tar_download,IPROUTE2,iproute2,5.6.0,.tar.xz,https://www.kernel.org/pub/linux/utils/net/iproute2/,1b5b0e25ce6e23da7526ea1da044e814ad85ba761b10dd29c2b027c056b04692))
-$(eval $(call tar_download,IPTABLES,iptables,1.8.4,.tar.bz2,https://www.netfilter.org/projects/iptables/files/,993a3a5490a544c2cbf2ef15cf7e7ed21af1845baf228318d5c36ef8827e157c))
-$(eval $(call tar_download,NMAP,nmap,7.80,.tar.bz2,https://nmap.org/dist/,fcfa5a0e42099e12e4bf7a68ebe6fde05553383a682e816a7ec9256ab4773faa))
+$(eval $(call tar_download,IPERF,iperf,3.11,.tar.gz,https://downloads.es.net/pub/iperf/,de8cb409fad61a0574f4cb07eb19ce1159707403ac2dc01b5d175e91240b7e5f))
+$(eval $(call tar_download,BASH,bash,5.1.16,.tar.gz,https://ftp.gnu.org/gnu/bash/,5bac17218d3911834520dad13cd1f85ab944e1c09ae1aba55906be1f8192f558))
+$(eval $(call tar_download,IPROUTE2,iproute2,5.17.0,.tar.gz,https://www.kernel.org/pub/linux/utils/net/iproute2/,bda331d5c4606138892f23a565d78fca18919b4d508a0b7ca8391c2da2db68b9))
+$(eval $(call tar_download,IPTABLES,iptables,1.8.7,.tar.bz2,https://www.netfilter.org/projects/iptables/files/,c109c96bb04998cd44156622d36f8e04b140701ec60531a10668cfdff5e8d8f0))
+$(eval $(call tar_download,NMAP,nmap,7.92,.tgz,https://nmap.org/dist/,064183ea642dc4c12b1ab3b5358ce1cef7d2e7e11ffa2849f16d339f5b717117))
 $(eval $(call tar_download,IPUTILS,iputils,s20190709,.tar.gz,https://github.com/iputils/iputils/archive/s20190709.tar.gz/#,a15720dd741d7538dd2645f9f516d193636ae4300ff7dbc8bfca757bf166490a))
-$(eval $(call tar_download,WIREGUARD_TOOLS,wireguard-tools,1.0.20200206,.tar.xz,https://git.zx2c4.com/wireguard-tools/snapshot/,f5207248c6a3c3e3bfc9ab30b91c1897b00802ed861e1f9faaed873366078c64))
-
-KERNEL_BUILD_PATH := $(BUILD_PATH)/kernel$(if $(findstring yes,$(DEBUG_KERNEL)),-debug)
-rwildcard=$(foreach d,$(wildcard $1*),$(call rwildcard,$d/,$2) $(filter $(subst *,%,$2),$d))
-WIREGUARD_SOURCES := $(call rwildcard,$(KERNEL_PATH)/drivers/net/wireguard/,*)
-
-export CFLAGS ?= -O3 -pipe
-export LDFLAGS ?=
-export CPPFLAGS := -I$(BUILD_PATH)/include
+$(eval $(call tar_download,WIREGUARD_TOOLS,wireguard-tools,1.0.20210914,.tar.xz,https://git.zx2c4.com/wireguard-tools/snapshot/,97ff31489217bb265b7ae850d3d0f335ab07d2652ba1feec88b734bc96bd05ac))
 
+export CFLAGS := -O3 -pipe
 ifeq ($(HOST_ARCH),$(ARCH))
-CROSS_COMPILE_FLAG := --host=$(CHOST)
 CFLAGS += -march=native
-STRIP := strip
-else
-$(info Cross compilation: building for $(CBUILD) using $(CHOST))
-CROSS_COMPILE_FLAG := --build=$(CBUILD) --host=$(CHOST)
-export CROSS_COMPILE=$(CBUILD)-
-STRIP := $(CBUILD)-strip
 endif
+export LDFLAGS :=
+export CPPFLAGS :=
+
+QEMU_VPORT_RESULT :=
 ifeq ($(ARCH),aarch64)
+CHOST := aarch64-linux-musl
 QEMU_ARCH := aarch64
 KERNEL_ARCH := arm64
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm64/boot/Image
+QEMU_VPORT_RESULT := virtio-serial-device
 ifeq ($(HOST_ARCH),$(ARCH))
 QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
 else
@@ -79,9 +68,11 @@ QEMU_MACHINE := -cpu cortex-a53 -machine virt
 CFLAGS += -march=armv8-a -mtune=cortex-a53
 endif
 else ifeq ($(ARCH),aarch64_be)
+CHOST := aarch64_be-linux-musl
 QEMU_ARCH := aarch64
 KERNEL_ARCH := arm64
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm64/boot/Image
+QEMU_VPORT_RESULT := virtio-serial-device
 ifeq ($(HOST_ARCH),$(ARCH))
 QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
 else
@@ -89,9 +80,11 @@ QEMU_MACHINE := -cpu cortex-a53 -machine virt
 CFLAGS += -march=armv8-a -mtune=cortex-a53
 endif
 else ifeq ($(ARCH),arm)
+CHOST := arm-linux-musleabi
 QEMU_ARCH := arm
 KERNEL_ARCH := arm
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm/boot/zImage
+QEMU_VPORT_RESULT := virtio-serial-device
 ifeq ($(HOST_ARCH),$(ARCH))
 QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
 else
@@ -99,9 +92,11 @@ QEMU_MACHINE := -cpu cortex-a15 -machine virt
 CFLAGS += -march=armv7-a -mtune=cortex-a15 -mabi=aapcs-linux
 endif
 else ifeq ($(ARCH),armeb)
+CHOST := armeb-linux-musleabi
 QEMU_ARCH := arm
 KERNEL_ARCH := arm
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm/boot/zImage
+QEMU_VPORT_RESULT := virtio-serial-device
 ifeq ($(HOST_ARCH),$(ARCH))
 QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
 else
@@ -110,6 +105,7 @@ CFLAGS += -march=armv7-a -mabi=aapcs-linux # We don't pass -mtune=cortex-a15 due
 LDFLAGS += -Wl,--be8
 endif
 else ifeq ($(ARCH),x86_64)
+CHOST := x86_64-linux-musl
 QEMU_ARCH := x86_64
 KERNEL_ARCH := x86_64
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/x86/boot/bzImage
@@ -120,6 +116,7 @@ QEMU_MACHINE := -cpu Skylake-Server -machine q35
 CFLAGS += -march=skylake-avx512
 endif
 else ifeq ($(ARCH),i686)
+CHOST := i686-linux-musl
 QEMU_ARCH := i386
 KERNEL_ARCH := x86
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/x86/boot/bzImage
@@ -130,6 +127,7 @@ QEMU_MACHINE := -cpu coreduo -machine q35
 CFLAGS += -march=prescott
 endif
 else ifeq ($(ARCH),mips64)
+CHOST := mips64-linux-musl
 QEMU_ARCH := mips64
 KERNEL_ARCH := mips
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
@@ -141,6 +139,7 @@ QEMU_MACHINE := -cpu MIPS64R2-generic -machine malta -smp 1
 CFLAGS += -march=mips64r2 -EB
 endif
 else ifeq ($(ARCH),mips64el)
+CHOST := mips64el-linux-musl
 QEMU_ARCH := mips64el
 KERNEL_ARCH := mips
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
@@ -152,6 +151,7 @@ QEMU_MACHINE := -cpu MIPS64R2-generic -machine malta -smp 1
 CFLAGS += -march=mips64r2 -EL
 endif
 else ifeq ($(ARCH),mips)
+CHOST := mips-linux-musl
 QEMU_ARCH := mips
 KERNEL_ARCH := mips
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
@@ -163,6 +163,7 @@ QEMU_MACHINE := -cpu 24Kf -machine malta -smp 1
 CFLAGS += -march=mips32r2 -EB
 endif
 else ifeq ($(ARCH),mipsel)
+CHOST := mipsel-linux-musl
 QEMU_ARCH := mipsel
 KERNEL_ARCH := mips
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
@@ -173,7 +174,18 @@ else
 QEMU_MACHINE := -cpu 24Kf -machine malta -smp 1
 CFLAGS += -march=mips32r2 -EL
 endif
+else ifeq ($(ARCH),powerpc64)
+CHOST := powerpc64-linux-musl
+QEMU_ARCH := ppc64
+KERNEL_ARCH := powerpc
+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
+ifeq ($(HOST_ARCH),$(ARCH))
+QEMU_MACHINE := -cpu host,accel=kvm -machine pseries
+else
+QEMU_MACHINE := -machine pseries
+endif
 else ifeq ($(ARCH),powerpc64le)
+CHOST := powerpc64le-linux-musl
 QEMU_ARCH := ppc64
 KERNEL_ARCH := powerpc
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
@@ -182,8 +194,8 @@ QEMU_MACHINE := -cpu host,accel=kvm -machine pseries
 else
 QEMU_MACHINE := -machine pseries
 endif
-CFLAGS += -mcpu=powerpc64le -mlong-double-64
 else ifeq ($(ARCH),powerpc)
+CHOST := powerpc-linux-musl
 QEMU_ARCH := ppc
 KERNEL_ARCH := powerpc
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/powerpc/boot/uImage
@@ -192,26 +204,79 @@ QEMU_MACHINE := -cpu host,accel=kvm -machine ppce500
 else
 QEMU_MACHINE := -machine ppce500
 endif
-CFLAGS += -mcpu=powerpc -mlong-double-64 -msecure-plt
 else ifeq ($(ARCH),m68k)
+CHOST := m68k-linux-musl
 QEMU_ARCH := m68k
 KERNEL_ARCH := m68k
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
 KERNEL_CMDLINE := $(shell sed -n 's/CONFIG_CMDLINE=\(.*\)/\1/p' arch/m68k.config)
 ifeq ($(HOST_ARCH),$(ARCH))
-QEMU_MACHINE := -cpu host,accel=kvm -machine q800 -smp 1 -append $(KERNEL_CMDLINE)
+QEMU_MACHINE := -cpu host,accel=kvm -machine q800 -append $(KERNEL_CMDLINE)
 else
 QEMU_MACHINE := -machine q800 -smp 1 -append $(KERNEL_CMDLINE)
 endif
+else ifeq ($(ARCH),riscv64)
+CHOST := riscv64-linux-musl
+QEMU_ARCH := riscv64
+KERNEL_ARCH := riscv
+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/riscv/boot/Image
+QEMU_VPORT_RESULT := virtio-serial-device
+ifeq ($(HOST_ARCH),$(ARCH))
+QEMU_MACHINE := -cpu host,accel=kvm -machine virt
+else
+QEMU_MACHINE := -cpu rv64 -machine virt
+endif
+else ifeq ($(ARCH),riscv32)
+CHOST := riscv32-linux-musl
+QEMU_ARCH := riscv32
+KERNEL_ARCH := riscv
+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/riscv/boot/Image
+QEMU_VPORT_RESULT := virtio-serial-device
+ifeq ($(HOST_ARCH),$(ARCH))
+QEMU_MACHINE := -cpu host,accel=kvm -machine virt
+else
+QEMU_MACHINE := -cpu rv32 -machine virt
+endif
+else ifeq ($(ARCH),s390x)
+CHOST := s390x-linux-musl
+QEMU_ARCH := s390x
+KERNEL_ARCH := s390
+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/s390/boot/bzImage
+KERNEL_CMDLINE := $(shell sed -n 's/CONFIG_CMDLINE=\(.*\)/\1/p' arch/s390x.config)
+QEMU_VPORT_RESULT := virtio-serial-ccw
+ifeq ($(HOST_ARCH),$(ARCH))
+QEMU_MACHINE := -cpu host,accel=kvm -machine s390-ccw-virtio -append $(KERNEL_CMDLINE)
+else
+QEMU_MACHINE := -machine s390-ccw-virtio -append $(KERNEL_CMDLINE)
+endif
 else
-$(error I only build: x86_64, i686, arm, armeb, aarch64, aarch64_be, mips, mipsel, mips64, mips64el, powerpc64le, powerpc, m68k)
+$(error I only build: x86_64, i686, arm, armeb, aarch64, aarch64_be, mips, mipsel, mips64, mips64el, powerpc64, powerpc64le, powerpc, m68k, riscv64, riscv32, s390x)
+endif
+
+TOOLCHAIN_FILENAME := $(CHOST)-cross.tgz
+TOOLCHAIN_TAR := $(DISTFILES_PATH)/$(TOOLCHAIN_FILENAME)
+TOOLCHAIN_PATH := $(BUILD_PATH)/$(CHOST)-cross
+TOOLCHAIN_DIR := https://download.wireguard.com/qemu-test/toolchains/20211123/
+$(eval $(call file_download,toolchain-sha256sums-20211123,$(TOOLCHAIN_DIR)SHA256SUMS#,83da033fd8c798df476c21d9612da2dfb896ec62fbed4ceec5eefc0e56b3f0c8))
+$(eval $(call file_download,$(TOOLCHAIN_FILENAME),$(TOOLCHAIN_DIR),,$(DISTFILES_PATH)/toolchain-sha256sums-20211123))
+
+STRIP := $(CHOST)-strip
+CROSS_COMPILE_FLAG := --build=$(CBUILD) --host=$(CHOST)
+$(info Building for $(CHOST) using $(CBUILD))
+export CROSS_COMPILE := $(CHOST)-
+export PATH := $(TOOLCHAIN_PATH)/bin:$(PATH)
+export CC := $(CHOST)-gcc
+CCACHE_PATH := $(shell which ccache 2>/dev/null)
+ifneq ($(CCACHE_PATH),)
+export KBUILD_BUILD_TIMESTAMP := Fri Jun  5 15:58:00 CEST 2015
+export PATH := $(TOOLCHAIN_PATH)/bin/ccache:$(PATH)
+export CCACHE_SLOPPINESS := file_macro,time_macros
+export CCACHE_DIR ?= $(PWD)/ccache
 endif
 
-REAL_CC := $(CBUILD)-gcc
-MUSL_CC := $(BUILD_PATH)/musl-gcc
-export CC := $(MUSL_CC)
-USERSPACE_DEPS := $(MUSL_CC) $(BUILD_PATH)/include/.installed $(BUILD_PATH)/include/linux/.installed
+USERSPACE_DEPS := $(TOOLCHAIN_PATH)/.installed $(TOOLCHAIN_PATH)/$(CHOST)/include/linux/.installed
 
+comma := ,
 build: $(KERNEL_BZIMAGE)
 qemu: $(KERNEL_BZIMAGE)
 	rm -f $(BUILD_PATH)/result
@@ -222,13 +287,14 @@ qemu: $(KERNEL_BZIMAGE)
 		$(QEMU_MACHINE) \
 		-m $$(grep -q CONFIG_DEBUG_KMEMLEAK=y $(KERNEL_BUILD_PATH)/.config && echo 1G || echo 256M) \
 		-serial stdio \
-		-serial file:$(BUILD_PATH)/result \
+		-chardev file,path=$(BUILD_PATH)/result,id=result \
+		$(if $(QEMU_VPORT_RESULT),-device $(QEMU_VPORT_RESULT) -device virtserialport$(comma)chardev=result,-serial chardev:result) \
 		-no-reboot \
 		-monitor none \
 		-kernel $<
 	grep -Fq success $(BUILD_PATH)/result
 
-$(BUILD_PATH)/init-cpio-spec.txt:
+$(BUILD_PATH)/init-cpio-spec.txt: $(TOOLCHAIN_PATH)/.installed $(BUILD_PATH)/init
 	mkdir -p $(BUILD_PATH)
 	echo "file /init $(BUILD_PATH)/init 755 0 0" > $@
 	echo "file /init.sh $(PWD)/../netns.sh 755 0 0" >> $@
@@ -246,10 +312,10 @@ $(BUILD_PATH)/init-cpio-spec.txt:
 	echo "slink /bin/iptables xtables-legacy-multi 777 0 0" >> $@
 	echo "slink /bin/ping6 ping 777 0 0" >> $@
 	echo "dir /lib 755 0 0" >> $@
-	echo "file /lib/libc.so $(MUSL_PATH)/lib/libc.so 755 0 0" >> $@
-	echo "slink /lib/ld-linux.so.1 libc.so 777 0 0" >> $@
+	echo "file /lib/libc.so $(TOOLCHAIN_PATH)/$(CHOST)/lib/libc.so 755 0 0" >> $@
+	echo "slink $$($(CHOST)-readelf -p .interp '$(BUILD_PATH)/init'| grep -o '/lib/.*') libc.so 777 0 0" >> $@
 
-$(KERNEL_BUILD_PATH)/.config: kernel.config arch/$(ARCH).config
+$(KERNEL_BUILD_PATH)/.config: $(TOOLCHAIN_PATH)/.installed kernel.config arch/$(ARCH).config
 	mkdir -p $(KERNEL_BUILD_PATH)
 	cp kernel.config $(KERNEL_BUILD_PATH)/minimal.config
 	printf 'CONFIG_NR_CPUS=$(NR_CPUS)\nCONFIG_INITRAMFS_SOURCE="$(BUILD_PATH)/init-cpio-spec.txt"\n' >> $(KERNEL_BUILD_PATH)/minimal.config
@@ -258,29 +324,24 @@ $(KERNEL_BUILD_PATH)/.config: kernel.config arch/$(ARCH).config
 	cd $(KERNEL_BUILD_PATH) && ARCH=$(KERNEL_ARCH) $(KERNEL_PATH)/scripts/kconfig/merge_config.sh -n $(KERNEL_BUILD_PATH)/.config $(KERNEL_BUILD_PATH)/minimal.config
 	$(if $(findstring yes,$(DEBUG_KERNEL)),cp debug.config $(KERNEL_BUILD_PATH) && cd $(KERNEL_BUILD_PATH) && ARCH=$(KERNEL_ARCH) $(KERNEL_PATH)/scripts/kconfig/merge_config.sh -n $(KERNEL_BUILD_PATH)/.config debug.config,)
 
-$(KERNEL_BZIMAGE): $(KERNEL_BUILD_PATH)/.config $(BUILD_PATH)/init-cpio-spec.txt $(MUSL_PATH)/lib/libc.so $(IPERF_PATH)/src/iperf3 $(IPUTILS_PATH)/ping $(BASH_PATH)/bash $(IPROUTE2_PATH)/misc/ss $(IPROUTE2_PATH)/ip/ip $(IPTABLES_PATH)/iptables/xtables-legacy-multi $(NMAP_PATH)/ncat/ncat $(WIREGUARD_TOOLS_PATH)/src/wg $(BUILD_PATH)/init ../netns.sh $(WIREGUARD_SOURCES)
+$(KERNEL_BZIMAGE): $(TOOLCHAIN_PATH)/.installed $(KERNEL_BUILD_PATH)/.config $(BUILD_PATH)/init-cpio-spec.txt $(IPERF_PATH)/src/iperf3 $(IPUTILS_PATH)/ping $(BASH_PATH)/bash $(IPROUTE2_PATH)/misc/ss $(IPROUTE2_PATH)/ip/ip $(IPTABLES_PATH)/iptables/xtables-legacy-multi $(NMAP_PATH)/ncat/ncat $(WIREGUARD_TOOLS_PATH)/src/wg $(BUILD_PATH)/init ../netns.sh $(WIREGUARD_SOURCES)
 	$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE)
 
-$(BUILD_PATH)/include/linux/.installed: | $(KERNEL_BUILD_PATH)/.config
-	$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) INSTALL_HDR_PATH=$(BUILD_PATH) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE) headers_install
+$(TOOLCHAIN_PATH)/$(CHOST)/include/linux/.installed: | $(KERNEL_BUILD_PATH)/.config $(TOOLCHAIN_PATH)/.installed
+	rm -rf $(TOOLCHAIN_PATH)/$(CHOST)/include/linux
+	$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) INSTALL_HDR_PATH=$(TOOLCHAIN_PATH)/$(CHOST) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE) headers_install
 	touch $@
 
-$(MUSL_PATH)/lib/libc.so: $(MUSL_TAR)
+$(TOOLCHAIN_PATH)/.installed: $(TOOLCHAIN_TAR)
 	mkdir -p $(BUILD_PATH)
 	flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
-	cd $(MUSL_PATH) && CC=$(REAL_CC) ./configure --prefix=/ --disable-static --build=$(CBUILD)
-	$(MAKE) -C $(MUSL_PATH)
-	$(STRIP) -s $@
-
-$(BUILD_PATH)/include/.installed: $(MUSL_PATH)/lib/libc.so
-	$(MAKE) -C $(MUSL_PATH) DESTDIR=$(BUILD_PATH) install-headers
+	$(STRIP) -s $(TOOLCHAIN_PATH)/$(CHOST)/lib/libc.so
+ifneq ($(CCACHE_PATH),)
+	mkdir -p $(TOOLCHAIN_PATH)/bin/ccache
+	ln -s $(CCACHE_PATH) $(TOOLCHAIN_PATH)/bin/ccache/$(CC)
+endif
 	touch $@
 
-$(MUSL_CC): $(MUSL_PATH)/lib/libc.so
-	sh $(MUSL_PATH)/tools/musl-gcc.specs.sh $(BUILD_PATH)/include $(MUSL_PATH)/lib /lib/ld-linux.so.1 > $(BUILD_PATH)/musl-gcc.specs
-	printf '#!/bin/sh\nexec "$(REAL_CC)" --specs="$(BUILD_PATH)/musl-gcc.specs" "$$@"\n' > $(BUILD_PATH)/musl-gcc
-	chmod +x $(BUILD_PATH)/musl-gcc
-
 $(IPERF_PATH)/.installed: $(IPERF_TAR)
 	mkdir -p $(BUILD_PATH)
 	flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
@@ -289,6 +350,7 @@ $(IPERF_PATH)/.installed: $(IPERF_TAR)
 	touch $@
 
 $(IPERF_PATH)/src/iperf3: | $(IPERF_PATH)/.installed $(USERSPACE_DEPS)
+	cd $(IPERF_PATH) && autoreconf -fi
 	cd $(IPERF_PATH) && CFLAGS="$(CFLAGS) -D_GNU_SOURCE" ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --enable-static --disable-shared --with-openssl=no
 	$(MAKE) -C $(IPERF_PATH)
 	$(STRIP) -s $@
@@ -304,7 +366,7 @@ $(WIREGUARD_TOOLS_PATH)/src/wg: | $(WIREGUARD_TOOLS_PATH)/.installed $(USERSPACE
 
 $(BUILD_PATH)/init: init.c | $(USERSPACE_DEPS)
 	mkdir -p $(BUILD_PATH)
-	$(MUSL_CC) -o $@ $(CFLAGS) $(LDFLAGS) -std=gnu11 $<
+	$(CC) -o $@ $(CFLAGS) $(LDFLAGS) -std=gnu11 $<
 	$(STRIP) -s $@
 
 $(IPUTILS_PATH)/.installed: $(IPUTILS_TAR)
@@ -323,15 +385,15 @@ $(BASH_PATH)/.installed: $(BASH_TAR)
 	touch $@
 
 $(BASH_PATH)/bash: | $(BASH_PATH)/.installed $(USERSPACE_DEPS)
-	cd $(BASH_PATH) && ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --without-bash-malloc --disable-debugger --disable-help-builtin --disable-history --disable-multibyte --disable-progcomp --disable-readline --disable-mem-scramble
+	cd $(BASH_PATH) && ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --without-bash-malloc --disable-debugger --disable-help-builtin --disable-history --disable-progcomp --disable-readline --disable-mem-scramble
 	$(MAKE) -C $(BASH_PATH)
 	$(STRIP) -s $@
 
 $(IPROUTE2_PATH)/.installed: $(IPROUTE2_TAR)
 	mkdir -p $(BUILD_PATH)
 	flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
-	printf 'CC:=$(CC)\nPKG_CONFIG:=pkg-config\nTC_CONFIG_XT:=n\nTC_CONFIG_ATM:=n\nTC_CONFIG_IPSET:=n\nIP_CONFIG_SETNS:=y\nHAVE_ELF:=n\nHAVE_MNL:=n\nHAVE_BERKELEY_DB:=n\nHAVE_LATEX:=n\nHAVE_PDFLATEX:=n\nCFLAGS+=-DHAVE_SETNS\n' > $(IPROUTE2_PATH)/config.mk
-	printf 'lib: snapshot\n\t$$(MAKE) -C lib\nip/ip: lib\n\t$$(MAKE) -C ip ip\nmisc/ss: lib\n\t$$(MAKE) -C misc ss\n' >> $(IPROUTE2_PATH)/Makefile
+	printf 'CC:=$(CC)\nPKG_CONFIG:=pkg-config\nTC_CONFIG_XT:=n\nTC_CONFIG_ATM:=n\nTC_CONFIG_IPSET:=n\nIP_CONFIG_SETNS:=y\nHAVE_ELF:=n\nHAVE_MNL:=n\nHAVE_BERKELEY_DB:=n\nHAVE_LATEX:=n\nHAVE_PDFLATEX:=n\nCFLAGS+=-DHAVE_SETNS -DHAVE_HANDLE_AT\n' > $(IPROUTE2_PATH)/config.mk
+	printf 'libutil.a.done:\n\tflock -x $$@.lock $$(MAKE) -C lib\n\ttouch $$@\nip/ip: libutil.a.done\n\t$$(MAKE) -C ip ip\nmisc/ss: libutil.a.done\n\t$$(MAKE) -C misc ss\n' >> $(IPROUTE2_PATH)/Makefile
 	touch $@
 
 $(IPROUTE2_PATH)/ip/ip: | $(IPROUTE2_PATH)/.installed $(USERSPACE_DEPS)
@@ -370,8 +432,13 @@ clean:
 distclean: clean
 	rm -rf $(DISTFILES_PATH)
 
+cacheclean: clean
+ifneq ($(CCACHE_DIR),)
+	rm -rf $(CCACHE_DIR)
+endif
+
 menuconfig: $(KERNEL_BUILD_PATH)/.config
 	$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE) menuconfig
 
-.PHONY: qemu build clean distclean menuconfig
+.PHONY: qemu build clean distclean cacheclean menuconfig
 .DELETE_ON_ERROR:
diff --git a/tools/testing/selftests/wireguard/qemu/arch/aarch64.config b/tools/testing/selftests/wireguard/qemu/arch/aarch64.config
index 3d063bb247bb..09016880ce03 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/aarch64.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/aarch64.config
@@ -1,5 +1,8 @@
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyAMA0 wg.success=ttyAMA1"
+CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1280
diff --git a/tools/testing/selftests/wireguard/qemu/arch/aarch64_be.config b/tools/testing/selftests/wireguard/qemu/arch/aarch64_be.config
index dbdc7e406a7b..19ff66e4c602 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/aarch64_be.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/aarch64_be.config
@@ -1,6 +1,9 @@
 CONFIG_CPU_BIG_ENDIAN=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyAMA0 wg.success=ttyAMA1"
+CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1280
diff --git a/tools/testing/selftests/wireguard/qemu/arch/arm.config b/tools/testing/selftests/wireguard/qemu/arch/arm.config
index 148f49905418..fc7959bef9c2 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/arm.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/arm.config
@@ -4,6 +4,9 @@ CONFIG_ARCH_VIRT=y
 CONFIG_THUMB2_KERNEL=n
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyAMA0 wg.success=ttyAMA1"
+CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/armeb.config b/tools/testing/selftests/wireguard/qemu/arch/armeb.config
index bd76b07d00a2..f3066be81c19 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/armeb.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/armeb.config
@@ -4,7 +4,10 @@ CONFIG_ARCH_VIRT=y
 CONFIG_THUMB2_KERNEL=n
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyAMA0 wg.success=ttyAMA1"
+CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1 panic_on_warn=1"
 CONFIG_CPU_BIG_ENDIAN=y
 CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/i686.config b/tools/testing/selftests/wireguard/qemu/arch/i686.config
index a9b4fe795048..6d90892a85a2 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/i686.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/i686.config
@@ -2,5 +2,5 @@ CONFIG_ACPI=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/m68k.config b/tools/testing/selftests/wireguard/qemu/arch/m68k.config
index 62a15bdb877e..82c925e49beb 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/m68k.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/m68k.config
@@ -5,5 +5,5 @@ CONFIG_MAC=y
 CONFIG_SERIAL_PMACZILOG=y
 CONFIG_SERIAL_PMACZILOG_TTYS=y
 CONFIG_SERIAL_PMACZILOG_CONSOLE=y
-CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/mips.config b/tools/testing/selftests/wireguard/qemu/arch/mips.config
index df71d6b95546..d7ec63c17b30 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/mips.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/mips.config
@@ -7,5 +7,5 @@ CONFIG_POWER_RESET_SYSCON=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/mips64.config b/tools/testing/selftests/wireguard/qemu/arch/mips64.config
index 90c783f725c4..0994947e3392 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/mips64.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/mips64.config
@@ -10,5 +10,5 @@ CONFIG_POWER_RESET_SYSCON=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1280
diff --git a/tools/testing/selftests/wireguard/qemu/arch/mips64el.config b/tools/testing/selftests/wireguard/qemu/arch/mips64el.config
index 435b0b43e00c..591184342f47 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/mips64el.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/mips64el.config
@@ -11,5 +11,5 @@ CONFIG_POWER_RESET_SYSCON=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1280
diff --git a/tools/testing/selftests/wireguard/qemu/arch/mipsel.config b/tools/testing/selftests/wireguard/qemu/arch/mipsel.config
index 62bb50c4a85f..18a498293737 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/mipsel.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/mipsel.config
@@ -8,5 +8,5 @@ CONFIG_POWER_RESET_SYSCON=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/powerpc.config b/tools/testing/selftests/wireguard/qemu/arch/powerpc.config
index 57957093b71b..5e04882e8e35 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/powerpc.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/powerpc.config
@@ -6,5 +6,5 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_MATH_EMULATION=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/powerpc64.config b/tools/testing/selftests/wireguard/qemu/arch/powerpc64.config
new file mode 100644
index 000000000000..737194b7619e
--- /dev/null
+++ b/tools/testing/selftests/wireguard/qemu/arch/powerpc64.config
@@ -0,0 +1,13 @@
+CONFIG_PPC64=y
+CONFIG_PPC_PSERIES=y
+CONFIG_ALTIVEC=y
+CONFIG_VSX=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+CONFIG_PPC_RADIX_MMU=y
+CONFIG_HVC_CONSOLE=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=hvc0 wg.success=hvc1 panic_on_warn=1"
+CONFIG_SECTION_MISMATCH_WARN_ONLY=y
+CONFIG_FRAME_WARN=1280
+CONFIG_THREAD_SHIFT=14
diff --git a/tools/testing/selftests/wireguard/qemu/arch/powerpc64le.config b/tools/testing/selftests/wireguard/qemu/arch/powerpc64le.config
index f52f1e2bc7f6..8148b9d1220a 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/powerpc64le.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/powerpc64le.config
@@ -7,7 +7,7 @@ CONFIG_PPC_RADIX_MMU=y
 CONFIG_HVC_CONSOLE=y
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=hvc0 wg.success=hvc1"
+CONFIG_CMDLINE="console=hvc0 wg.success=hvc1 panic_on_warn=1"
 CONFIG_SECTION_MISMATCH_WARN_ONLY=y
 CONFIG_FRAME_WARN=1280
 CONFIG_THREAD_SHIFT=14
diff --git a/tools/testing/selftests/wireguard/qemu/arch/riscv32.config b/tools/testing/selftests/wireguard/qemu/arch/riscv32.config
new file mode 100644
index 000000000000..0bd0e72d95d4
--- /dev/null
+++ b/tools/testing/selftests/wireguard/qemu/arch/riscv32.config
@@ -0,0 +1,12 @@
+CONFIG_ARCH_RV32I=y
+CONFIG_MMU=y
+CONFIG_FPU=y
+CONFIG_SOC_VIRT=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_CMDLINE="console=ttyS0 wg.success=vport0p1 panic_on_warn=1"
+CONFIG_CMDLINE_FORCE=y
diff --git a/tools/testing/selftests/wireguard/qemu/arch/riscv64.config b/tools/testing/selftests/wireguard/qemu/arch/riscv64.config
new file mode 100644
index 000000000000..dc266f3b1915
--- /dev/null
+++ b/tools/testing/selftests/wireguard/qemu/arch/riscv64.config
@@ -0,0 +1,12 @@
+CONFIG_ARCH_RV64I=y
+CONFIG_MMU=y
+CONFIG_FPU=y
+CONFIG_SOC_VIRT=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_CMDLINE="console=ttyS0 wg.success=vport0p1 panic_on_warn=1"
+CONFIG_CMDLINE_FORCE=y
diff --git a/tools/testing/selftests/wireguard/qemu/arch/s390x.config b/tools/testing/selftests/wireguard/qemu/arch/s390x.config
new file mode 100644
index 000000000000..a7b44dca0b0a
--- /dev/null
+++ b/tools/testing/selftests/wireguard/qemu/arch/s390x.config
@@ -0,0 +1,6 @@
+CONFIG_SCLP_VT220_TTY=y
+CONFIG_SCLP_VT220_CONSOLE=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_S390_GUEST=y
+CONFIG_CMDLINE="console=ttysclp0 wg.success=vport0p1 panic_on_warn=1"
diff --git a/tools/testing/selftests/wireguard/qemu/arch/x86_64.config b/tools/testing/selftests/wireguard/qemu/arch/x86_64.config
index 45dd53a0d760..efa00693e08b 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/x86_64.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/x86_64.config
@@ -2,5 +2,5 @@ CONFIG_ACPI=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1280
diff --git a/tools/testing/selftests/wireguard/qemu/init.c b/tools/testing/selftests/wireguard/qemu/init.c
index 0b45055d9de0..2a0f48fac925 100644
--- a/tools/testing/selftests/wireguard/qemu/init.c
+++ b/tools/testing/selftests/wireguard/qemu/init.c
@@ -110,12 +110,6 @@ static void enable_logging(void)
 			panic("write(exception-trace)");
 		close(fd);
 	}
-	fd = open("/proc/sys/kernel/panic_on_warn", O_WRONLY);
-	if (fd >= 0) {
-		if (write(fd, "1\n", 2) != 2)
-			panic("write(panic_on_warn)");
-		close(fd);
-	}
 }
 
 static void kmod_selftests(void)