summaryrefslogtreecommitdiffstats
path: root/tools
diff options
context:
space:
mode:
authorIdo Schimmel <idosch@mellanox.com>2019-09-26 14:43:38 +0300
committerDavid S. Miller <davem@davemloft.net>2019-09-27 20:33:19 +0200
commit979b9b251ae06e3408153bd7b9342a290d65e826 (patch)
treefbc6206678f3a9c8a8316ff093fd1715201e452d /tools
parent4208966f65f520d7f392dbaa62e39a8fa88ffb95 (diff)
downloadlinux-979b9b251ae06e3408153bd7b9342a290d65e826.tar.bz2
mlxsw: spectrum: Clear VLAN filters during port initialization
When a port is created, its VLAN filters are not cleared by the firmware. This causes tagged packets to be later dropped by the ingress STP filters, which default to DISCARD state. The above did not matter much until commit b5ce611fd96e ("mlxsw: spectrum: Add devlink-trap support") where we exposed the drop reason to users. Without this patch, the drop reason users will see is not consistent. If a port is enslaved to a VLAN-aware bridge and a packet with an invalid VLAN tries to ingress the bridge, it will be dropped due to ingress STP filter. If the VLAN is later enabled and then disabled, the packet will be dropped by the ingress VLAN filter despite the above being a seemingly NOP operation. Fix this by clearing all the VLAN filters during port initialization. Adjust the test accordingly. Fixes: b5ce611fd96e ("mlxsw: spectrum: Add devlink-trap support") Reported-by: Alex Kushnarov <alexanderk@mellanox.com> Tested-by: Alex Kushnarov <alexanderk@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'tools')
-rwxr-xr-xtools/testing/selftests/drivers/net/mlxsw/devlink_trap_l2_drops.sh7
1 files changed, 0 insertions, 7 deletions
diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l2_drops.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l2_drops.sh
index 5dcdfa20fc6c..126caf28b529 100755
--- a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l2_drops.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l2_drops.sh
@@ -224,13 +224,6 @@ ingress_vlan_filter_test()
local vid=10
bridge vlan add vid $vid dev $swp2 master
- # During initialization the firmware enables all the VLAN filters and
- # the driver does not turn them off since the traffic will be discarded
- # by the STP filter whose default is DISCARD state. Add the VID on the
- # ingress bridge port and then remove it to make sure it is not member
- # in the VLAN.
- bridge vlan add vid $vid dev $swp1 master
- bridge vlan del vid $vid dev $swp1 master
RET=0